dgit.raspbian.org Git - mutter.git/log

Merge mutter (3.30.2-3) import into refs/heads/workingbranch

skip texture test

This test fails on hppa, mipsel, powerpc, ppc64 and s390x.

See the build logs at
https://buildd.debian.org/status/logs.php?pkg=mutter&ver=3.30.0-2

I don't know why this test works in the clutter-1.0 package.

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/324

Applied-upstream: no

Gbp-Pq: Topic debian
Gbp-Pq: Name skip-texture-test.patch

Sync to the hardware refresh rate, not just 60.00Hz

The Clutter master clock supports three synchronization methods in order of
preference:
  (a) Hardware presentation times
  (b) Swap throttling
  (c) Fake vsync at 60.00Hz
X11 already supports all three but Wayland only has (c). This patch implements
both (a) and (b) for Wayland bringing it in line with X11.

Origin: https://gitlab.gnome.org/GNOME/mutter/merge_requests/171 via backport https://gitlab.gnome.org/GNOME/mutter/merge_requests/318
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=781296
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1763892
Forwarded: yes
Last-Update: 2018-11-23

Gbp-Pq: Name Sync-to-the-hardware-refresh-rate-not-just-60.00Hz.patch

backends/x11: Support input-synaptics, if present.

Add support for configuring the Xorg synaptics touchpad driver.

Turns out it's very simple to support both libinput and synaptics
simultaneously, both under the heading of XI2.

Bug-Ubuntu: https://launchpad.net/bugs/1686081
Forwarded: https://gitlab.gnome.org/GNOME/mutter/merge_requests/37
Applied-upstream: no, rejected as not long-term sustainable
Last-Update: 2018-03-16

Gbp-Pq: Topic debian
Gbp-Pq: Name synaptics-support.patch

gtk-shell: Work around non-working startup notifications

GNOME Shell relies on the MetaScreen::startup-sequence-changed signal,
which is tied to (lib)startup-notification and therefore X11. As a result,
when we remove the startup sequence of a wayland client, GNOME Shell will
not be notified about this until startup-notification's timeout is hit.
As a temporary stop-gap, go through XWayland even for wayland clients,
so that the signal is emitted when expected.

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=768531
Applied-upstream: no

Gbp-Pq: Name bgo768531_workaround-startup-notifications.patch

theme: load icons as Gtk does with fallback and RTL support

Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-load-icons-as-Gtk-does-with-fallback-and-RTL-suppor.patch

theme: use gtk_render_icon_suface to paint button icon

This will properly take care of the icon transformations
and of the shadow.

Fixes #100

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/100
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1764558
Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-use-gtk_render_icon_suface-to-paint-button-icon.patch

mutter (3.30.2-3) unstable; urgency=medium

* control: Depend on g-s-d-common instead of g-s-d. We only need the
schemas.

[dgit import unpatched mutter 3.30.2-3]

Import mutter_3.30.2-3.debian.tar.xz

[dgit import tarball mutter 3.30.2-3 mutter_3.30.2-3.debian.tar.xz]

Merge mutter (3.30.2-2) import into refs/heads/workingbranch

skip texture test

This test fails on hppa, mipsel, powerpc, ppc64 and s390x.

See the build logs at
https://buildd.debian.org/status/logs.php?pkg=mutter&ver=3.30.0-2

I don't know why this test works in the clutter-1.0 package.

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/324

Applied-upstream: no

Gbp-Pq: Topic debian
Gbp-Pq: Name skip-texture-test.patch

Sync to the hardware refresh rate, not just 60.00Hz

The Clutter master clock supports three synchronization methods in order of
preference:
  (a) Hardware presentation times
  (b) Swap throttling
  (c) Fake vsync at 60.00Hz
X11 already supports all three but Wayland only has (c). This patch implements
both (a) and (b) for Wayland bringing it in line with X11.

Origin: https://gitlab.gnome.org/GNOME/mutter/merge_requests/171 via backport https://gitlab.gnome.org/GNOME/mutter/merge_requests/318
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=781296
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1763892
Forwarded: yes
Last-Update: 2018-11-23

Gbp-Pq: Name Sync-to-the-hardware-refresh-rate-not-just-60.00Hz.patch

backends/x11: Support input-synaptics, if present.

Add support for configuring the Xorg synaptics touchpad driver.

Turns out it's very simple to support both libinput and synaptics
simultaneously, both under the heading of XI2.

Bug-Ubuntu: https://launchpad.net/bugs/1686081
Forwarded: https://gitlab.gnome.org/GNOME/mutter/merge_requests/37
Applied-upstream: no, rejected as not long-term sustainable
Last-Update: 2018-03-16

Gbp-Pq: Topic debian
Gbp-Pq: Name synaptics-support.patch

gtk-shell: Work around non-working startup notifications

GNOME Shell relies on the MetaScreen::startup-sequence-changed signal,
which is tied to (lib)startup-notification and therefore X11. As a result,
when we remove the startup sequence of a wayland client, GNOME Shell will
not be notified about this until startup-notification's timeout is hit.
As a temporary stop-gap, go through XWayland even for wayland clients,
so that the signal is emitted when expected.

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=768531
Applied-upstream: no

Gbp-Pq: Name bgo768531_workaround-startup-notifications.patch

theme: load icons as Gtk does with fallback and RTL support

Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-load-icons-as-Gtk-does-with-fallback-and-RTL-suppor.patch

theme: use gtk_render_icon_suface to paint button icon

This will properly take care of the icon transformations
and of the shadow.

Fixes #100

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/100
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1764558
Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-use-gtk_render_icon_suface-to-paint-button-icon.patch

mutter (3.30.2-2) unstable; urgency=medium

  [ Daniel van Vugt ]
  * Add Sync-to-the-hardware-refresh-rate-not-just-60.00Hz.patch to render at
    the full monitor refresh rate (LP: #1763892).

  [ Jeremy Bicha ]
  * debian/libmutter-3-0.symbols: Mark a Wacom symbol as linux-any

  [ Patrice Duroux ]
  * add back lost NEWS (Closes: #914942)

[dgit import unpatched mutter 3.30.2-2]

Import mutter_3.30.2-2.debian.tar.xz

[dgit import tarball mutter 3.30.2-2 mutter_3.30.2-2.debian.tar.xz]

Import mutter_3.30.2.orig.tar.xz

[dgit import orig mutter_3.30.2.orig.tar.xz]

Merge mutter (3.30.2-1) import into refs/heads/workingbranch

skip texture test

This test fails on hppa, mipsel, powerpc, ppc64 and s390x.

See the build logs at
https://buildd.debian.org/status/logs.php?pkg=mutter&ver=3.30.0-2

I don't know why this test works in the clutter-1.0 package.

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/324

Applied-upstream: no

Gbp-Pq: Topic debian
Gbp-Pq: Name skip-texture-test.patch

backends/x11: Support input-synaptics, if present.

Add support for configuring the Xorg synaptics touchpad driver.

Turns out it's very simple to support both libinput and synaptics
simultaneously, both under the heading of XI2.

Bug-Ubuntu: https://launchpad.net/bugs/1686081
Forwarded: https://gitlab.gnome.org/GNOME/mutter/merge_requests/37
Applied-upstream: no, rejected as not long-term sustainable
Last-Update: 2018-03-16

Gbp-Pq: Topic debian
Gbp-Pq: Name synaptics-support.patch

gtk-shell: Work around non-working startup notifications

GNOME Shell relies on the MetaScreen::startup-sequence-changed signal,
which is tied to (lib)startup-notification and therefore X11. As a result,
when we remove the startup sequence of a wayland client, GNOME Shell will
not be notified about this until startup-notification's timeout is hit.
As a temporary stop-gap, go through XWayland even for wayland clients,
so that the signal is emitted when expected.

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=768531
Applied-upstream: no

Gbp-Pq: Name bgo768531_workaround-startup-notifications.patch

theme: load icons as Gtk does with fallback and RTL support

Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-load-icons-as-Gtk-does-with-fallback-and-RTL-suppor.patch

theme: use gtk_render_icon_suface to paint button icon

This will properly take care of the icon transformations
and of the shadow.

Fixes #100

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/100
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1764558
Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-use-gtk_render_icon_suface-to-paint-button-icon.patch

mutter (3.30.2-1) unstable; urgency=medium

  * Team upload
  * New upstream release
    - Drop cherry-picked patches

[dgit import unpatched mutter 3.30.2-1]

Import mutter_3.30.2-1.debian.tar.xz

[dgit import tarball mutter 3.30.2-1 mutter_3.30.2-1.debian.tar.xz]

Merge mutter (3.30.1-2) import into refs/heads/workingbranch

skip texture test

This test fails on hppa, mipsel, powerpc, ppc64 and s390x.

See the build logs at
https://buildd.debian.org/status/logs.php?pkg=mutter&ver=3.30.0-2

I don't know why this test works in the clutter-1.0 package.

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/324

Applied-upstream: no

Gbp-Pq: Topic debian
Gbp-Pq: Name skip-texture-test.patch

backends/x11: Support input-synaptics, if present.

Add support for configuring the Xorg synaptics touchpad driver.

Turns out it's very simple to support both libinput and synaptics
simultaneously, both under the heading of XI2.

Bug-Ubuntu: https://launchpad.net/bugs/1686081
Forwarded: https://gitlab.gnome.org/GNOME/mutter/merge_requests/37
Applied-upstream: no, rejected as not long-term sustainable
Last-Update: 2018-03-16

Gbp-Pq: Topic debian
Gbp-Pq: Name synaptics-support.patch

gtk-shell: Work around non-working startup notifications

GNOME Shell relies on the MetaScreen::startup-sequence-changed signal,
which is tied to (lib)startup-notification and therefore X11. As a result,
when we remove the startup sequence of a wayland client, GNOME Shell will
not be notified about this until startup-notification's timeout is hit.
As a temporary stop-gap, go through XWayland even for wayland clients,
so that the signal is emitted when expected.

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=768531
Applied-upstream: no

Gbp-Pq: Name bgo768531_workaround-startup-notifications.patch

clutter: Smooth out master clock to smooth visuals

Clutter's master clock was jittery because it included errors in cur_tick
such as dispatch delays due to other sources. Dispatch could also occur up
to 1ms early since GSource can only be timed to the millisecond. All of this
could impact the visual smoothness of animations as they are displayed on
the steady interval of the monitor, but spacially moving in less regular
steps derived from the dispatch times.

The simple fix is to ignore any jitter in dispatch timing. Try a little
bit harder to use a precise interval that will better match the display
hardware, and smoother visuals will follow.

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/25
Forwarded: https://gitlab.gnome.org/GNOME/mutter/merge_requests/70

Gbp-Pq: Name clutter-Smooth-out-master-clock-to-smooth-visuals.patch

theme: load icons as Gtk does with fallback and RTL support

Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-load-icons-as-Gtk-does-with-fallback-and-RTL-suppor.patch

theme: use gtk_render_icon_suface to paint button icon

This will properly take care of the icon transformations
and of the shadow.

Fixes #100

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/100
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1764558
Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-use-gtk_render_icon_suface-to-paint-button-icon.patch

mutter (3.30.1-2) unstable; urgency=medium

* Only Build-Depend on libdrm-dev and libgbm-dev on Linux

[dgit import unpatched mutter 3.30.1-2]

Import mutter_3.30.1-2.debian.tar.xz

[dgit import tarball mutter 3.30.1-2 mutter_3.30.1-2.debian.tar.xz]

Merge mutter (3.30.1-1) import into refs/heads/workingbranch

Import mutter_3.30.1.orig.tar.xz

[dgit import orig mutter_3.30.1.orig.tar.xz]

skip texture test

This test fails on hppa, mipsel, powerpc, ppc64 and s390x.

See the build logs at
https://buildd.debian.org/status/logs.php?pkg=mutter&ver=3.30.0-2

I don't know why this test works in the clutter-1.0 package.

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/324

Applied-upstream: no

Gbp-Pq: Topic debian
Gbp-Pq: Name skip-texture-test.patch

backends/x11: Support input-synaptics, if present.

Add support for configuring the Xorg synaptics touchpad driver.

Turns out it's very simple to support both libinput and synaptics
simultaneously, both under the heading of XI2.

Bug-Ubuntu: https://launchpad.net/bugs/1686081
Forwarded: https://gitlab.gnome.org/GNOME/mutter/merge_requests/37
Applied-upstream: no, rejected as not long-term sustainable
Last-Update: 2018-03-16

Gbp-Pq: Topic debian
Gbp-Pq: Name synaptics-support.patch

gtk-shell: Work around non-working startup notifications

GNOME Shell relies on the MetaScreen::startup-sequence-changed signal,
which is tied to (lib)startup-notification and therefore X11. As a result,
when we remove the startup sequence of a wayland client, GNOME Shell will
not be notified about this until startup-notification's timeout is hit.
As a temporary stop-gap, go through XWayland even for wayland clients,
so that the signal is emitted when expected.

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=768531
Applied-upstream: no

Gbp-Pq: Name bgo768531_workaround-startup-notifications.patch

clutter: Smooth out master clock to smooth visuals

Clutter's master clock was jittery because it included errors in cur_tick
such as dispatch delays due to other sources. Dispatch could also occur up
to 1ms early since GSource can only be timed to the millisecond. All of this
could impact the visual smoothness of animations as they are displayed on
the steady interval of the monitor, but spacially moving in less regular
steps derived from the dispatch times.

The simple fix is to ignore any jitter in dispatch timing. Try a little
bit harder to use a precise interval that will better match the display
hardware, and smoother visuals will follow.

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/25
Forwarded: https://gitlab.gnome.org/GNOME/mutter/merge_requests/70

Gbp-Pq: Name clutter-Smooth-out-master-clock-to-smooth-visuals.patch

theme: load icons as Gtk does with fallback and RTL support

Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-load-icons-as-Gtk-does-with-fallback-and-RTL-suppor.patch

theme: use gtk_render_icon_suface to paint button icon

This will properly take care of the icon transformations
and of the shadow.

Fixes #100

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/100
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1764558
Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-use-gtk_render_icon_suface-to-paint-button-icon.patch

mutter (3.30.1-1) unstable; urgency=medium

  * New upstream release (LP: #1796772)
  * Drop cherry-picked patches applied in new release
  * debian/libmutter-3-0.symbols: Add new symbols
  * Don't run the build tests on mips & mipsel since they fail
    and time out too much.
  * Drop skip-failing-tests.patch:
    - These tests seem to run ok except on mips and mipsel

[dgit import unpatched mutter 3.30.1-1]

Import mutter_3.30.1-1.debian.tar.xz

[dgit import tarball mutter 3.30.1-1 mutter_3.30.1-1.debian.tar.xz]

Merge mutter (3.30.0-1) import into refs/heads/workingbranch

Skip test that started failing with 3.25

That way we can still benefit by running all the other tests.

Bug: https://bugzilla.gnome.org/785319
Applied-upstream: no

Gbp-Pq: Topic debian
Gbp-Pq: Name skip-failing-tests-325.patch

Don't run failing tests

That way we can still benefit by running all the other tests.

Bug: https://bugzilla.gnome.org/782215
Bug: https://bugzilla.gnome.org/753836
Applied-upstream: no

Gbp-Pq: Topic debian
Gbp-Pq: Name skip-failing-tests.patch

backends/x11: Support input-synaptics, if present.

Add support for configuring the Xorg synaptics touchpad driver.

Turns out it's very simple to support both libinput and synaptics
simultaneously, both under the heading of XI2.

Bug-Ubuntu: https://launchpad.net/bugs/1686081
Forwarded: https://gitlab.gnome.org/GNOME/mutter/merge_requests/37
Applied-upstream: no, rejected as not long-term sustainable
Last-Update: 2018-03-16

Gbp-Pq: Topic debian
Gbp-Pq: Name synaptics-support.patch

gtk-shell: Work around non-working startup notifications

GNOME Shell relies on the MetaScreen::startup-sequence-changed signal,
which is tied to (lib)startup-notification and therefore X11. As a result,
when we remove the startup sequence of a wayland client, GNOME Shell will
not be notified about this until startup-notification's timeout is hit.
As a temporary stop-gap, go through XWayland even for wayland clients,
so that the signal is emitted when expected.

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=768531
Applied-upstream: no

Gbp-Pq: Name bgo768531_workaround-startup-notifications.patch

clutter: Smooth out master clock to smooth visuals

Clutter's master clock was jittery because it included errors in cur_tick
such as dispatch delays due to other sources. Dispatch could also occur up
to 1ms early since GSource can only be timed to the millisecond. All of this
could impact the visual smoothness of animations as they are displayed on
the steady interval of the monitor, but spacially moving in less regular
steps derived from the dispatch times.

The simple fix is to ignore any jitter in dispatch timing. Try a little
bit harder to use a precise interval that will better match the display
hardware, and smoother visuals will follow.

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/25
Forwarded: https://gitlab.gnome.org/GNOME/mutter/merge_requests/70

Gbp-Pq: Name clutter-Smooth-out-master-clock-to-smooth-visuals.patch

theme: load icons as Gtk does with fallback and RTL support

Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-load-icons-as-Gtk-does-with-fallback-and-RTL-suppor.patch

theme: use gtk_render_icon_suface to paint button icon

This will properly take care of the icon transformations
and of the shadow.

Fixes #100

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/100
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1764558
Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-use-gtk_render_icon_suface-to-paint-button-icon.patch

mutter (3.30.0-1) unstable; urgency=medium

  [ Didier Roche ]
  * New upstream release:
    - Updated translations

  [ Iain Lane ]
  * Merge experimental branch back into master and update references to it
    accordingly. This upload is going to unstable.

[dgit import unpatched mutter 3.30.0-1]

Import mutter_3.30.0.orig.tar.xz

[dgit import orig mutter_3.30.0.orig.tar.xz]

Import mutter_3.30.0-1.debian.tar.xz

[dgit import tarball mutter 3.30.0-1 mutter_3.30.0-1.debian.tar.xz]

Merge mutter (3.28.3-2) import into refs/heads/workingbranch

Skip test that started failing with 3.25

That way we can still benefit by running all the other tests.

Bug: https://bugzilla.gnome.org/785319
Applied-upstream: no

Gbp-Pq: Topic debian
Gbp-Pq: Name skip-failing-tests-325.patch

Don't run failing tests

That way we can still benefit by running all the other tests.

Bug: https://bugzilla.gnome.org/782215
Bug: https://bugzilla.gnome.org/753836
Applied-upstream: no

Gbp-Pq: Topic debian
Gbp-Pq: Name skip-failing-tests.patch

backends/x11: Support input-synaptics, if present.

Add support for configuring the Xorg synaptics touchpad driver.

Turns out it's very simple to support both libinput and synaptics
simultaneously, both under the heading of XI2.

Bug-Ubuntu: https://launchpad.net/bugs/1686081
Forwarded: https://gitlab.gnome.org/GNOME/mutter/merge_requests/37
Applied-upstream: no, rejected as not long-term sustainable
Last-Update: 2018-03-16

Gbp-Pq: Topic debian
Gbp-Pq: Name synaptics-support.patch

gtk-shell: Work around non-working startup notifications

GNOME Shell relies on the MetaScreen::startup-sequence-changed signal,
which is tied to (lib)startup-notification and therefore X11. As a result,
when we remove the startup sequence of a wayland client, GNOME Shell will
not be notified about this until startup-notification's timeout is hit.
As a temporary stop-gap, go through XWayland even for wayland clients,
so that the signal is emitted when expected.

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=768531
Applied-upstream: no

Gbp-Pq: Name bgo768531_workaround-startup-notifications.patch

core: Return -1 if meta_window_get_monitor is called on an unmanaged window

As opposed to crashing. In this case, letting the caller deal with
it is the best policy, since this is public API.

Fixes #78834

Forwarded: yes
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=788834
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/bionic/+source/gnome-shell/+bug/1724439

Gbp-Pq: Name core-Return-1-if-meta_window_get_monitor-is-called-on-an-.patch

clutter: Smooth out master clock to smooth visuals

Clutter's master clock was jittery because it included errors in cur_tick
such as dispatch delays due to other sources. Dispatch could also occur up
to 1ms early since GSource can only be timed to the millisecond. All of this
could impact the visual smoothness of animations as they are displayed on
the steady interval of the monitor, but spacially moving in less regular
steps derived from the dispatch times.

The simple fix is to ignore any jitter in dispatch timing. Try a little
bit harder to use a precise interval that will better match the display
hardware, and smoother visuals will follow.

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/25
Forwarded: https://gitlab.gnome.org/GNOME/mutter/merge_requests/70

Gbp-Pq: Name clutter-Smooth-out-master-clock-to-smooth-visuals.patch

theme: load icons as Gtk does with fallback and RTL support

Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-load-icons-as-Gtk-does-with-fallback-and-RTL-suppor.patch

theme: use gtk_render_icon_suface to paint button icon

This will properly take care of the icon transformations
and of the shadow.

Fixes #100

Bug: https://gitlab.gnome.org/GNOME/mutter/issues/100
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1764558
Forwarded: yes, https://gitlab.gnome.org/GNOME/mutter/merge_requests/62

Gbp-Pq: Name theme-use-gtk_render_icon_suface-to-paint-button-icon.patch

monitor: Use current monitor mode to check whether active

For historical reasons meta_monitor_is_active() checked whether it is
active by checking whether the main output have a CRTC assigned and
whether that CRTC has a current mode. At a later point, the MetaMonitor
got its own mode abstraction (MetaMonitorMode), but
meta_monitor_is_active() was never updated to use this.

An issue with checking the main output's CRTC state is that, if there is
some CRTC mode combination that for some reason isn't properly detected
by the MetaMonitorMode abstraction (e.g. some tiling configuration not
yet handled), meta_monitor_is_active() would return TRUE, even though no
(abstracted) mode was set. This would cause confusion here and there,
leading to NULL pointer dereferences due to the assumption that if a
monitor is active, it has an active mode.

Instead, change meta_monitor_is_active() to directly check the current
monitor mode, and log a warning if the main output still happen to have
a CRTC with a mode assigned to it. This way, when an not undrestood CRTC
mode combination is encountered, instead of dereferencing NULL pointers,
simply assume the monitor is not active, which means that it will not be
managed or rendered by mutter at all.

https://gitlab.gnome.org/GNOME/mutter/issues/130

(cherry picked from commit 4d465eac0806eb1ead375e2852d4a9d6bc24524f)

Bug-GNOME: https://gitlab.gnome.org/GNOME/mutter/issues/130
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1723615
Applied-Upstream: 3.28.4, commit:https://gitlab.gnome.org/GNOME/mutter/commit/d0d80780

Gbp-Pq: Name monitor-Use-current-monitor-mode-to-check-whether-active.patch

window: Explicitly exclude unmanaging window from focus again

Since commit b3b9d9e16 we no longer have to pass the unmanaging window
to make sure we don't try to focus it again, however the parameter also
influences the focus policy by giving ancestors preference over the normal
stack order.

https://gitlab.gnome.org/GNOME/mutter/issues/15

(cherry picked from commit d99442d6e6b7c9b383863cc754db609398d4e65b)

Bug-GNOME: https://gitlab.gnome.org/GNOME/mutter/issues/15
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1422253
Applied-Upstream: 3.28.4, commit:https://gitlab.gnome.org/GNOME/mutter/commit/137f2223

Gbp-Pq: Name window-Explicitly-exclude-unmanaging-window-from-focus-ag.patch

window: Don't refuse to move focus to the grab window

We refuse to move focus while a grab operation is in place. While this
generally makes sense, there's no reason why the window that owns the
grab shouldn't be given the regular input focus as well - we pretty
much assume that the grab window is also the focus window anyway.

In fact there's a strong reason for allowing the focus change here:
If the grab window isn't the focus window, it probably has a modal
transient that is focused instead, and a likely reason for the focus
request is that the transient is being unmanaged and we must move
the focus elsewhere.

https://gitlab.gnome.org/GNOME/mutter/issues/15

(cherry picked from commit 148da24f9510ebd23d750b8224aa0ab3a549e69e)

Bug-GNOME: https://gitlab.gnome.org/GNOME/mutter/issues/15
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1422253
Applied-Upstream: 3.28.4, commit:https://gitlab.gnome.org/GNOME/mutter/commit/513cc535

Gbp-Pq: Name window-Don-t-refuse-to-move-focus-to-the-grab-window.patch

window/wayland: Always update monitor for non-user ops

meta_window_wayland_update_main_monitor() would skip the monitor update
if the difference in scale between the old and the new monitor would
cause another monitor change.

While this is suitable when the monitor change results from a user
interactively moving the surface between monitors of different scales,
this can leave dangling pointers to freed monitors when this is
triggered by a change of monitor configuration.

Make sure we update the monitor unconditionally if not from a user
operation.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/189
(cherry picked from commit a3da4b8d5bd217c0262fd9361036877d155a300f)

Bug-GNOME: https://gitlab.gnome.org/GNOME/mutter/issues/189
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1784398
Applied-Upstream: 3.28.4, commit:https://gitlab.gnome.org/GNOME/mutter/commit/d74a04606

Gbp-Pq: Name window-wayland-Always-update-monitor-for-non-user-ops.patch

monitor-manager: Filter out low screen resolutions

Avoid exporting through org.gnome.Mutter.DisplayConfig.GetCurrentState
excessively-low screen resolutions setting both a minimum width and a minimum
height. GetCurrentState is e.g. used by Gnome Control Center to build a list of
selectable resolutions.

Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=793223
(cherry picked from commit 649c26e05a67c52a4f5acf6b4aa3b1217e9bc9c0)

Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1772831
Bug-GNOME: https://bugzilla.gnome.org/show_bug.cgi?id=793223
Applied-Upstream: 3.28.4, commit:https://gitlab.gnome.org/GNOME/mutter/commit/0c5e61a2a

Gbp-Pq: Name monitor-manager-Filter-out-low-screen-resolutions.patch

native/gpu: Handle drmModeSetCrtc() failing gracefully

If drmModeSetCrtc() is called with no fb, mode or connectors for some
CRTC it may still fail, and we should handle that gracefully instead of
assuming it failed to set a non-disabled state.

Closes https://gitlab.gnome.org/GNOME/mutter/issues/70

(cherry picked from commit 6e953e2725d5d5b10d14c7bd479bd99f6853addc)

Bug-GNOME: https://gitlab.gnome.org/GNOME/mutter/issues/70
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1754949
Applied-Upstream: https://gitlab.gnome.org/GNOME/mutter/commit/44682a2cc555

Gbp-Pq: Name native-gpu-Handle-drmModeSetCrtc-failing-gracefully.patch

gpu-kms: Don't crash if drmModeGetResources returns NULL

DRM drivers can be opened by meta_launcher_open_restricted() even if they don't
implement modesetting. However, drmModeGetResources() will return NULL.

Check whether that happened in meta_gpu_kms_new() and return with an error
instead of crashing.

Fixes #223.

Applied-Upstream: https://gitlab.gnome.org/GNOME/mutter/commit/62660bbd15
Bug-GNOME: https://gitlab.gnome.org/GNOME/mutter/issues/223
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1767956

Gbp-Pq: Name gpu-kms-Don-t-crash-if-drmModeGetResources-returns-N.patch

mutter (3.28.3-2) unstable; urgency=medium

  * Team upload

  [ Iain Lane ]
  * debian/gbp.conf: Set the upstream branch to upstream/3.28.x, since we've
    branched for experimental now.

  [ Marco Trevisan (Treviño) ]
  * d/p/native-gpu-Handle-drmModeSetCrtc-failing-gracefully.patch:
    - Avoid crashing when warning about wrongly set crtc mode
      (LP: #1754949)
  * d/p/gpu-kms-Don-t-crash-if-drmModeGetResources-returns-N.patch:
    - Don't crash if drmModeGetResources returns NULL  (LP: #1767956)
  * d/p/window-wayland-Always-update-monitor-for-non-user-ops.patch:
    - Always update monitor in wayland, avoiding crash (LP: #1784398)
  * d/p/monitor-manager-Filter-out-low-screen-resolutions.patch:
    - Don't return screen resolutions that can't be applied (LP: #1772831)
  * d/p/window-Don-t-refuse-to-move-focus-to-the-grab-window.patch,
    d/p/window-Explicitly-exclude-unmanaging-window-from-focus-ag.patch:
    - Don't crash if a modal dialog closes while being dragged
      (LP: #1422253)
  * d/p/monitor-Use-current-monitor-mode-to-check-whether-active.patch:
    - Don't try to use an invalid monitor mode to figure out scaling
      (LP: #1723615)

  [ Simon McVittie ]
  * Sort patch series in upstream order, with patches applied upstream
    first
  * d/copyright: Remove obsolete FSF postal addresses
  * Standards-Version: 4.1.5 (no changes required)
  * Set Rules-Requires-Root to no
  * Update symbols file

[dgit import unpatched mutter 3.28.3-2]

Import mutter_3.28.3-2.debian.tar.xz

[dgit import tarball mutter 3.28.3-2 mutter_3.28.3-2.debian.tar.xz]

Merge mutter (3.28.3-1) import into refs/heads/workingbranch

Import mutter_3.28.3.orig.tar.xz

[dgit import orig mutter_3.28.3.orig.tar.xz]