lan78xx: Change LEDs to include 10Mb activity

The default LED modes put 1000Mb/activity on orange and 100Mb/activity
on green, but this leaves no indication for a 10Mb link. Change the
defaults to put 10Mb/100Mb/activity on green.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

lan78xx: Read initial EEE status from DT

Add two new DT properties:
* microchip,eee-enabled  - a boolean to enable EEE
* microchip,tx-lpi-timer - time in microseconds to wait before entering
                           low power state

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

BCM270X_DT: Add Pi 3+ dts files

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

config: Set CONFIG_USB_LAN78XX=y

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

added capture_clear option to pps-gpio via dtoverlay (#2433)

brcmfmac: fix scheduled scan result handling for newer chips

commit 53e3a80d80c80bf50ab64cf6c44fb0fa41aa22d8 upstream.

The scan results for scheduled scan as retrieved from the device
have changed. A field has been added which is not needed. However,
the appended info is. Luckily they are versioned so check that to
find out the location of the appended data.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Fixing memset call in pisound.c

Signed-off-by: Giedrius Trainavicius <giedrius@blokas.io>

Generic Rotary Encoder overlay for multiple instances (#2388)

Modify the rotary-encoder overlay to support multiple instances.

ipv6: fix NULL dereference in ip6_route_dev_notify() (#2381)

commit 12d94a804946af291e24b80fc53ec86264765781 upstream.

Based on a syzkaller report [1], I found that a per cpu allocation
failure in snmp6_alloc_dev() would then lead to NULL dereference in
ip6_route_dev_notify().

It seems this is a very old bug, thus no Fixes tag in this submission.

Let's add in6_dev_put_clear() helper, as we will probably use
it elsewhere (once available/present in net-next)

[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 17294 Comm: syz-executor6 Not tainted 4.13.0-rc2+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff88019f456680 task.stack: ffff8801c6e58000
RIP: 0010:__read_once_size include/linux/compiler.h:250 [inline]
RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline]
RIP: 0010:refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178
RSP: 0018:ffff8801c6e5f1b0 EFLAGS: 00010202
RAX: 0000000000000037 RBX: dffffc0000000000 RCX: ffffc90005d25000
RDX: ffff8801c6e5f218 RSI: ffffffff82342bbf RDI: 0000000000000001
RBP: ffff8801c6e5f240 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff10038dcbe37
R13: 0000000000000006 R14: 0000000000000001 R15: 00000000000001b8
FS:  00007f21e0429700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001ddbc22000 CR3: 00000001d632b000 CR4: 00000000001426e0
DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
 refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211
 in6_dev_put include/net/addrconf.h:335 [inline]
 ip6_route_dev_notify+0x1c9/0x4a0 net/ipv6/route.c:3732
 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1678
 call_netdevice_notifiers net/core/dev.c:1694 [inline]
 rollback_registered_many+0x91c/0xe80 net/core/dev.c:7107
 rollback_registered+0x1be/0x3c0 net/core/dev.c:7149
 register_netdevice+0xbcd/0xee0 net/core/dev.c:7587
 register_netdev+0x1a/0x30 net/core/dev.c:7669
 loopback_net_init+0x76/0x160 drivers/net/loopback.c:214
 ops_init+0x10a/0x570 net/core/net_namespace.c:118
 setup_net+0x313/0x710 net/core/net_namespace.c:294
 copy_net_ns+0x27c/0x580 net/core/net_namespace.c:418
 create_new_namespaces+0x425/0x880 kernel/nsproxy.c:107
 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:206
 SYSC_unshare kernel/fork.c:2347 [inline]
 SyS_unshare+0x653/0xfa0 kernel/fork.c:2297
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4512c9
RSP: 002b:00007f21e0428c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 0000000000718150 RCX: 00000000004512c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000062020200
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b973d
R13: 00000000ffffffff R14: 000000002001d000 R15: 00000000000002dd
Code: 50 2b 34 82 c7 00 f1 f1 f1 f1 c7 40 04 04 f2 f2 f2 c7 40 08 f3 f3
f3 f3 e8 a1 43 39 ff 4c 89 f8 48 8b 95 70 ff ff ff 48 c1 e8 03 <0f> b6
0c 18 4c 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85
RIP: __read_once_size include/linux/compiler.h:250 [inline] RSP:
ffff8801c6e5f1b0
RIP: atomic_read arch/x86/include/asm/atomic.h:26 [inline] RSP:
ffff8801c6e5f1b0
RIP: refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP:
ffff8801c6e5f1b0
---[ end trace e441d046c6410d31 ]---

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>

Merge remote-tracking branch 'stable/linux-4.9.y' into rpi-4.9.y

Add missing SND_PISOUND selects dependency to SND_RAWMIDI

Without it the Pisound module fails to compile.
See https://github.com/raspberrypi/linux/issues/2366

Signed-off-by: Simon van der Veldt <simon.vanderveldt@gmail.com>

BCM270X_DT: More cosmetic DT changes

Remove unnecessary duplicate labels (but keep spi0).

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

drm/vc4: Add support for NV21 and NV61.

NV12 (YUV420 2 plane) and NV16 (YUV422 2 plane) were
supported, but NV21 and NV61 (same but with Cb and Cr
swapped) weren't. Add them.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1f50799525e3401551dff2b0b2828b9ab892f75f.1510841336.git.dave.stevenson@raspberrypi.org
(cherry picked from commit cb20dd170d6a7d41e0f347998771b0e0db183438)

drm/vc4: Use .pixel_order instead of custom .flip_cbcr

The hardware has enums for altering the Cr and Cb order,
so use this instead of having a flag which swaps the
order the pointers are presented to the hardware
(that only worked for 3 plane formats anyway).

Explicitly sets .pixel_order in each case, rather than
relying on then default XYCBCR order being a value 0.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/563872b69c1e5df142cb15ebfca7f20056b8a64c.1510841336.git.dave.stevenson@raspberrypi.org
(cherry picked from commit 090cb0c690183be849e2bfa0427220f1e435fa30)

drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888

Filling out the list of supported formats based on those the
hardware can support.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/b551205d1c33fa49eef2c33ed2d60c5339b2f299.1510841336.git.dave.stevenson@raspberrypi.org
(cherry picked from commit 88f8156fba43d040dc5af42f88db2c53d6c69443)

drm/vc4: Account for interrupts in flight

Synchronously disable the IRQ to make the following cancel_work_sync
invocation effective.

An interrupt in flight could enqueue further overflow mem work. As we
free the binner BO immediately following vc4_irq_uninstall this caused
a NULL pointer dereference in the work callback vc4_overflow_mem_work.

Link: https://github.com/anholt/linux/issues/114
Signed-off-by: Stefan Schake <stschake@gmail.com>
Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.")
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1510275907-993-2-git-send-email-stschake@gmail.com
(cherry picked from commit 253696ccd613fbdaa5aba1de44c461a058e0a114)

drm/panel: rpi-touchscreen: propagate errors in rpi_touchscreen_i2c_read()

There is one caller which checks whether rpi_touchscreen_i2c_read()
returns negative error codes.  Currently it can't because negative
error codes are truncated to u8, but that's easy to fix if we change the
type to int.

Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171020002845.kar2wg7gqxg7tzqi@mwanda
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 85b4587f8e94143bafb8b6a4003a5187b9a8753d)

drm/vc4: Move the DSI clock divider workaround closer to the clock call.

We want the adjusted_mode->clock to be the actual clock we're
expecting to program, so that consumers see the right values for clock
and vrefresh.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170815234722.20700-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
(cherry picked from commit d409eeafa9ba1c0f2eb75a2619fc787808a545e4)

drm/vc4: Skip ULPS latching when we're in that ULPS state already.

It seems that trying to go from unlatched to unlatched will time out
waiting for STOP, and we can just skip that.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Fix crash if we have to unbind HDMI.

We need the card to unregister before the codec that the card
references.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Fix leak of HDMI EDID

We don't keep a pointer to it around anywhere, so it's our job to free
it.

Cc: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://github.com/anholt/linux/issues/101
Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170808205605.4432-1-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
(cherry picked from commit 5afe0e62a548a0aa7d2095a98530b68f3d2c64e6)

drm/vc4: Fix sleeps during the IRQ handler for DSI transactions.

VC4's DSI1 has a bug where the AXI connection is broken for 32-bit
writes from the CPU, so we use the DMA engine to DMA 32-bit values
into registers instead.  That sleeps, so we can't do it from the top
half.

As a solution, use an interrupt thread so that all our writes happen
when sleeping is is allowed.

v2: Use IRQF_ONESHOT (suggested by Boris)
v3: Style nitpicks.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014001255.32005-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> (v2)
(cherry picked from commit af0c8c10564aac5b6d67308129ec09c4ad5db476)

drm/vc4: fix include notation and remove -Iinclude/drm flag

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.

While we are here, use <...> instead of "..." for include/linux/*.h
and include/sound/*.h headers too.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1495081793-9707-2-git-send-email-yamada.masahiro@socionext.com
(cherry picked from commit b7e8e25b37618070c444083bfb1aedf3317b2a96,
conflicts resolved by anholt)

drm/vc4: Avoid using vrefresh==0 mode in DSI htotal math.

The incoming mode might have a missing vrefresh field if it came from
drmModeSetCrtc(), which the kernel is supposed to calculate using
drm_mode_vrefresh().  We could either use that or the adjusted_mode's
original vrefresh value.

However, we can maintain a more exact vrefresh value (not just the
integer approximation), by scaling by the ratio of our clocks.

v2: Use math suggested by Andrzej Hajda instead.
v3: Simplify math now that adjusted_mode->clock isn't padded.
v4: Drop some parens.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170815234722.20700-2-eric@anholt.net
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
(cherry picked from commit af2eca53206c59ce9308a4f5f46c4a104a179b6b)

drm/vc4: Adjust modes in DSI to work around the integer PLL divider.

BCM2835's PLLD_DSI1 divider doesn't give us many choices for our pixel
clocks, so to support panels on the Raspberry Pi we need to set a
higher pixel clock rate than requested and adjust the mode we program
to extend out the HFP so that the refresh rate matches.

v2: Drop an unfinished comment (caught by Noralf)

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511235625.22427-2-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 86c1b9eff3f27c82bceabd3b5c76376b26d26e92)

drm/vc4: simplify exit path of a failed allocation of dsi_connector

If dsi_connector fails to allocate, the exit path via label 'fail'
checks if connector is null, which it always is, so the cleanup
that destroys connector is never going to be called.  Hence the
failure path can be more optimally performed by removing this
and just returning ERR_PTR(-ENOMEM).  This also removes the need
to initialize connector to NULL, and we can also remove ret too.

Detected by CoverityScan, CID#1399504 ("Logicall Dead Code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170203195624.7189-1-colin.king@canonical.com
(cherry picked from commit fce6a7bc22114c69b071bcf6fbfea2d07de6273c)

drm/vc4: Convert existing documentation to actual kerneldoc.

I'm going to hook vc4 up to the sphinx build, so clean up its comments
to not generate warnings when we do.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227201144.10970-2-eric@anholt.net
(cherry picked from commit 72f793f14afcec9697fadb8cd4e5d33327b108cd)

BCM270X_DT: Minor cosmetic DT tidy

Deleting the timer node for all bcm27* DTBs than re-adding an identical
one for bcm2708 is wrong - just delete it where it isn't wanted.

Also change a #include to match the style of similar includes.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

config: Add SND_USB_HIFACE=m

See: https://github.com/raspberrypi/linux/issues/2368

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

mmc: bcm2835-sdhost: Add include

highmem.h (needed for kmap_atomic) is pulled in by one of the other
include files, but only with some CONFIG settings. Make the inclusion
explicit to cater for cases where the CONFIG setting is absent.

See: https://github.com/raspberrypi/linux/issues/2366

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

Linux 4.9.80

spi: imx: do not access registers while clocks disabled

commit d593574aff0ab846136190b1729c151c736727ec upstream.

Since clocks are disabled except during message transfer clocks
are also disabled when spi_imx_remove gets called. Accessing
registers leads to a freeeze at least on a i.MX 6ULL. Enable
clocks before disabling accessing the MXC_CSPICTRL register.

Fixes: 9e556dcc55774 ("spi: spi-imx: only enable the clocks when we start to transfer a message")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS

commit 38b1f0fb42f772b8c9aac53593883a18ff5eb9d7 upstream.

The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS
lines, so only allow such wakeup method when the system actually has
RTS/CTS support.

Fixes: bc85734b126f ("serial: imx: allow waking up on RTSD")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: vhci_hcd: clear just the USB_PORT_STAT_POWER bit

Upstream commit 1c9de5bf4286 ("usbip: vhci-hcd: Add USB3 SuperSpeed
support")

vhci_hcd clears all the bits port_status bits instead of clearing
just the USB_PORT_STAT_POWER bit when it handles ClearPortFeature:
USB_PORT_FEAT_POWER. This causes vhci_hcd attach to fail in a bad
state, leaving device unusable by the client. The device is still
attached and however client can't use it.

The problem was fixed as part of larger change to add  USB3 Super
Speed support. This patch backports just the change to clear the
USB_PORT_STAT_POWER.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc()

commit 11fb37998759c48e4e4c200c974593cbeab25d3e upstream.

The current code tries to test for bits that are masked out by
usb_endpoint_maxp(). Instead, use the proper accessor to access
the new high bandwidth bits.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: uas: unconditionally bring back host after reset

commit cbeef22fd611c4f47c494b821b2b105b8af970bb upstream.

Quoting Hans:

If we return 1 from our post_reset handler, then our disconnect handler
will be called immediately afterwards. Since pre_reset blocks all scsi
requests our disconnect handler will then hang in the scsi_remove_host
call.

This is esp. bad because our disconnect handler hanging for ever also
stops the USB subsys from enumerating any new USB devices, causes commands
like lsusb to hang, etc.

In practice this happens when unplugging some uas devices because the hub
code may see the device as needing a warm-reset and calls usb_reset_device
before seeing the disconnect. In this case uas_configure_endpoints fails
with -ENODEV. We do not want to print an error for this, so this commit
also silences the shost_printk for -ENODEV.

ENDQUOTE

However, if we do that we better drop any unconditional execution
and report to the SCSI subsystem that we have undergone a reset
but we are not operational now.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: f_fs: Prevent gadget unbind if it is already unbound

commit ce5bf9a50daf2d9078b505aca1cea22e88ecb94a upstream.

Upon usb composition switch there is possibility of ep0 file
release happening after gadget driver bind. In case of composition
switch from adb to a non-adb composition gadget will never gets
bound again resulting into failure of usb device enumeration. Fix
this issue by checking FFS_FL_BOUND flag and avoid extra
gadget driver unbind if it is already done as part of composition
switch.

This fixes adb reconnection error reported on Android running
v4.4 and above kernel versions. Verified on Hikey running vanilla
v4.15-rc7 + few out of tree Mali patches.

Reviewed-at: https://android-review.googlesource.com/#/c/582632/

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg KH <gregkh@linux-foundation.org>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Badhri <badhri@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
[AmitP: Cherry-picked it from android-4.14 and updated the commit log]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: simple: add Motorola Tetra driver

commit 46fe895e22ab3845515ec06b01eaf1282b342e29 upstream.

Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI
devices.

D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0cad ProdID=9011 Rev=24.16
S:  Manufacturer=Motorola Solutions Inc.
S:  Product=Motorola Solutions TETRA PEI interface
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)

Note that these devices do not support the CDC SET_CONTROL_LINE_STATE
request (for any interface).

Reported-by: Max Schulze <max.schulze@posteo.de>
Tested-by: Max Schulze <max.schulze@posteo.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: list: don't list devices attached to vhci_hcd

commit ef824501f50846589f02173d73ce3fe6021a9d2a upstream.

usbip host lists devices attached to vhci_hcd on the same server
when user does attach over localhost or specifies the server as the
remote.

usbip attach -r localhost -b busid
or
usbip attach -r servername (or server IP)

Fix it to check and not list devices that are attached to vhci_hcd.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: prevent bind loops on devices attached to vhci_hcd

commit ef54cf0c600fb8f5737fb001a9e357edda1a1de8 upstream.

usbip host binds to devices attached to vhci_hcd on the same server
when user does attach over localhost or specifies the server as the
remote.

usbip attach -r localhost -b busid
or
usbip attach -r servername (or server IP)

Unbind followed by bind works, however device is left in a bad state with
accesses via the attached busid result in errors and system hangs during
shutdown.

Fix it to check and bail out if the device is already attached to vhci_hcd.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: io_edgeport: fix possible sleep-in-atomic

commit c7b8f77872c73f69a16528a9eb87afefcccdc18b upstream.

According to drivers/usb/serial/io_edgeport.c, the driver may sleep
under a spinlock.
The function call path is:
edge_bulk_in_callback (acquire the spinlock)
   process_rcvd_data
     process_rcvd_status
       change_port_settings
         send_iosp_ext_cmd
           write_cmd_usb
             usb_kill_urb --> may sleep

To fix it, the redundant usb_kill_urb() is removed from the error path
after usb_submit_urb() fails.

This possible bug is found by my static analysis tool (DSAC) and checked
by my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CDC-ACM: apply quirk for card reader

commit df1cc78a52491f71d8170d513d0f6f114faa1bda upstream.

This devices drops random bytes from messages if you talk to it
too fast.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: Do not log urb submission errors on disconnect

commit f0386c083c2ce85284dc0b419d7b89c8e567c09f upstream.

When disconnected sometimes the cdc-acm driver logs errors like these:

[20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19
[20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19
[20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19
[20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19
[20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19
[20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19
[20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19

Silence these by not logging errors when the result is -ENODEV.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: pl2303: new device id for Chilitag

commit d08dd3f3dd2ae351b793fc5b76abdbf0fd317b12 upstream.

This adds a new device id for Chilitag devices to the pl2303 driver.

Reported-by: "Chu.Mike [朱堅宜]" <Mike-Chu@prolific.com.tw>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: option: Add support for FS040U modem

commit 69341bd15018da0a662847e210f9b2380c71e623 upstream.

FS040U modem is manufactured by omega, and sold by Fujisoft. This patch
adds ID of the modem to use option1 driver. Interface 3 is used as
qmi_wwan, so the interface is ignored.

Signed-off-by: Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp>
Signed-off-by: Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: fix data race between tty_init_dev and flush of buf

commit b027e2298bd588d6fa36ed2eda97447fb3eac078 upstream.

There can be a race, if receive_buf call comes before
tty initialization completes in n_tty_open and tty->disc_data
may be NULL.

CPU0 CPU1
---- ----
 000|n_tty_receive_buf_common()    n_tty_open()
-001|n_tty_receive_buf2() tty_ldisc_open.isra.3()
-002|tty_ldisc_receive_buf(inline) tty_ldisc_setup()

Using ldisc semaphore lock in tty_init_dev till disc_data
initializes completely.

Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: separate a connection destroy from free struct kib_conn

commit 9b046013e5837f8a58453d1e9f8e01d03adb7fe7 upstream.

The logic of the original commit 4d99b2581eff ("staging: lustre: avoid
intensive reconnecting for ko2iblnd") was assumed conditional free of
struct kib_conn if the second argument free_conn in function
kiblnd_destroy_conn(struct kib_conn *conn, bool free_conn) is true.
But this hunk of code was dropped from original commit. As result the logic
works wrong and current code use struct kib_conn after free.

> drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c
> 3317  kiblnd_destroy_conn(conn, !peer);
>                           ^^^^ Freed always (but should be conditionally)
> 3318
> 3319  spin_lock_irqsave(lock, flags);
> 3320  if (!peer)
> 3321      continue;
> 3322
> 3323  conn->ibc_peer = peer;
>       ^^^^^^^^^^^^^^ Use after free
> 3324  if (peer->ibp_reconnected < KIB_RECONN_HIGH_RACE)
> 3325      list_add_tail(&conn->ibc_list,
>                          ^^^^^^^^^^^^^^ Use after free
> 3326                    &kiblnd_data.kib_reconn_list);
> 3327  else
> 3328      list_add_tail(&conn->ibc_list,
>                          ^^^^^^^^^^^^^^ Use after free
> 3329                    &kiblnd_data.kib_reconn_wait);

To avoid confusion this fix moved the freeing a struct kib_conn outside of
the function kiblnd_destroy_conn() and free as it was intended in original
commit.

Fixes: 4d99b2581eff ("staging: lustre: avoid intensive reconnecting for ko2iblnd")
Signed-off-by: Dmitry Eremin <Dmitry.Eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: Move IRQ enable to PM path

[ Upstream commit ce9caf2f79a5aa170a4b6456a03db639eed9c988 ]

We were calling enable_irq on bind, where it was already enabled previously
by the IRQ helper. Additionally, dev->irq is not set correctly until after
postinstall and so was always zero here, triggering a warning in 4.15.
Fix both by moving the enable to the power management resume path, where we
know there was a previous disable invocation during suspend.

Fixes: 253696ccd613 ("drm/vc4: Account for interrupts in flight")
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1514563543-32511-1-git-send-email-stschake@gmail.com
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Fix incorrect response to SIOCGIWESSID

[ Upstream commit b77992d2df9e47144354d1b25328b180afa33442 ]

When not associated with an AP, wifi device drivers should respond to the
SIOCGIWESSID ioctl with a zero-length string for the SSID, which is the
behavior expected by dhcpcd.

Currently, this driver returns an error code (-1) from the ioctl call,
which causes dhcpcd to assume that the device is not a wireless interface
and therefore it fails to work correctly with it thereafter.

This problem was reported and tested at
https://github.com/lwfinger/rtl8188eu/issues/234.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: don't dereference g until after it has been null checked

[ Upstream commit b2fc059fa549fe6881d4c1f8d698b0f50bcd16ec ]

Avoid dereferencing pointer g until after g has been sanity null checked;
move the assignment of cdev much later when it is required into a more
local scope.

Detected by CoverityScan, CID#1222135 ("Dereference before null check")

Fixes: b785ea7ce662 ("usb: gadget: composite: fix ep->maxburst initialization")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: usbtv: add a new usbid

[ Upstream commit 04226916d2360f56d57ad00bc48d2d1854d1e0b0 ]

A new usbid of UTV007 is found in a newly bought device.

The usbid is 1f71:3301.

The ID on the chip is:
UTV007
A89029.1
1520L18K1

Both video and audio is tested with the modified usbtv driver.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: NSP: Fix PPI interrupt types

[ Upstream commit 5f1aa51c7a1eef1c5a60b8334e32c89904964245 ]

Booting a kernel results in the kernel warning us about the following
PPI interrupts configuration:
[    0.105127] smp: Bringing up secondary CPUs ...
[    0.110545] GIC: PPI11 is secure or misconfigured
[    0.110551] GIC: PPI13 is secure or misconfigured

Fix this by using the appropriate edge configuration for PPI11 and
PPI13, this is similar to what was fixed for Northstar (BCM5301X) in
commit 0e34079cd1f6 ("ARM: dts: BCM5301X: Correct GIC_PPI interrupt
flags").

Fixes: 7b2e987de207 ("ARM: NSP: add minimal Northstar Plus device tree")
Fixes: 1a9d53cabaf4 ("ARM: dts: NSP: Add TWD Support to DT")
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix the TX queue hang timeout for MONITOR vif type

[ Upstream commit d1b275ffec459c5ae12b5c7086c84175696e5a9f ]

The MONITOR type is missing in the interface type switch.
Add it.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: ufshcd: fix potential NULL pointer dereference in ufshcd_config_vreg

[ Upstream commit 727535903bea924c4f73abb202c4b3e85fff0ca4 ]

_vreg_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference.

Fix this by moving the pointer dereference after _vreg_ has been null
checked.

This issue was detected with the help of Coccinelle.

Fixes: aa4976130934 ("ufs: Add regulator enable support")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: aacraid: Prevent crash in case of free interrupt during scsi EH path

[ Upstream commit e4717292ddebcfe231651b5aff9fa19ca158d178 ]

As part of the scsi EH path, aacraid performs a reinitialization of the
adapter, which encompass freeing resources and IRQs, NULLifying lots of
pointers, and then initialize it all over again.  We've identified a
problem during the free IRQ portion of this path if CONFIG_DEBUG_SHIRQ
is enabled on kernel config file.

Happens that, in case this flag was set, right after free_irq()
effectively clears the interrupt, it checks if it was requested as
IRQF_SHARED. In positive case, it performs another call to the IRQ
handler on driver. Problem is: since aacraid currently free some
resources *before* freeing the IRQ, once free_irq() path calls the
handler again (due to CONFIG_DEBUG_SHIRQ), aacraid crashes due to NULL
pointer dereference with the following trace:

  aac_src_intr_message+0xf8/0x740 [aacraid]
  __free_irq+0x33c/0x4a0
  free_irq+0x78/0xb0
  aac_free_irq+0x13c/0x150 [aacraid]
  aac_reset_adapter+0x2e8/0x970 [aacraid]
  aac_eh_reset+0x3a8/0x5d0 [aacraid]
  scsi_try_host_reset+0x74/0x180
  scsi_eh_ready_devs+0xc70/0x1510
  scsi_error_handler+0x624/0xa20

This patch prevents the crash by changing the order of the
deinitialization in this path of aacraid: first we clear the IRQ, then
we free other resources. No functional change intended.

Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: Properly retry failed dquot items in case of error during buffer writeback

[ Upstream commit 373b0589dc8d58bc09c9a28d03611ae4fb216057 ]

Once the inode item writeback errors is already fixed, it's time to fix the same
problem in dquot code.

Although there were no reports of users hitting this bug in dquot code (at least
none I've seen), the bug is there and I was already planning to fix it when the
correct approach to fix the inodes part was decided.

This patch aims to fix the same problem in dquot code, regarding failed buffers
being unable to be resubmitted once they are flush locked.

Tested with the recently test-case sent to fstests list by Hou Tao.

Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: ubsan fixes

[ Upstream commit 22a6c83777ac7c17d6c63891beeeac24cf5da450 ]

Fix some complaints from the UBSAN about signed integer addition overflows.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: Fix error handling path in 'omap_dmm_probe()'

[ Upstream commit 8677b1ac2db021ab30bb1fa34f1e56ebe0051ec3 ]

If we don't find a matching device node, we must free the memory allocated
in 'omap_dmm' a few lines above.

Fixes: 7cb0d6c17b96 ("drm/omap: fix TILER on OMAP5")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: fix 1-lane behavior

[ Upstream commit 4dbd6c03fbf88299c573d676838896c6e06aade2 ]

Use drm_dp_channel_eq_ok helper

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-7-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: fix AUXDATAn registers access

[ Upstream commit 9217c1abbc145a77d65c476cf2004a3df02104c7 ]

First four bytes should go to DP0_AUXWDATA0. Due to bug if
len > 4 first four bytes was writen to DP0_AUXWDATA1 and all
data get shifted by 4 bytes. Fix it.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-6-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: fix timing calculations

[ Upstream commit 66d1c3b94d5d59e4325e61a78d520f92c043d645 ]

Fields in HTIM01 and HTIM02 regs should be even.
Recomended thresh_dly value is max_tu_symbol.
Remove set of VPCTRL0.VSDELAY as it is related to DSI input
interface. Currently driver supports only DPI.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-5-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: fix DP0_MISC register set

[ Upstream commit f3b8adbe1911f66fd3cab1aaa74f0f66b7ceda25 ]

Remove shift from TU_SIZE_RECOMMENDED define as it used to
calculate max_tu_symbols.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-4-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: filter out too high modes

[ Upstream commit 99fc8e963a4c0203dba26a77cf737db6081bca14 ]

Pixel clock limitation for DPI is 154 MHz. Do not accept modes
with higher pixel clock rate.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-3-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: do no fail on hi-res displays

[ Upstream commit cffd2b16c01c3431a7a7dd62e722af33490fc436 ]

Do not fail data rates higher than 2.7 and more than 2 lanes.
Try to fall back to 2.7Gbps and 2 lanes.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-2-git-send-email-andrey.gusakov@cogentembedded.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kmemleak: add scheduling point to kmemleak_scan()

[ Upstream commit bde5f6bc68db51128f875a756e9082a6c6ff7b4c ]

kmemleak_scan() will scan struct page for each node and it can be really
large and resulting in a soft lockup.  We have seen a soft lockup when
do scan while compile kernel:

  watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287]
 [...]
  Call Trace:
   kmemleak_scan+0x21a/0x4c0
   kmemleak_write+0x312/0x350
   full_proxy_write+0x5a/0xa0
   __vfs_write+0x33/0x150
   vfs_write+0xad/0x1a0
   SyS_write+0x52/0xc0
   do_syscall_64+0x61/0x1a0
   entry_SYSCALL64_slow_path+0x25/0x25

Fix this by adding cond_resched every MAX_SCAN_SIZE.

Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Allow connect to return EHOSTUNREACH

[ Upstream commit 4ba161a793d5f43757c35feff258d9f20a082940 ]

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

quota: Check for register_shrinker() failure.

[ Upstream commit 88bc0ede8d35edc969350852894dc864a2dc1859 ]

register_shrinker() might return -ENOMEM error since Linux 3.12.
Call panic() as with other failure checks in this function if
register_shrinker() failed.

Fixes: 1d3d4437eae1 ("vmscan: per-node deferred work")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Jan Kara <jack@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit

[ Upstream commit 15bfe05c8d6386f1a90e9340d15336e85e32aad6 ]

On 64-bit (e.g. powerpc64/allmodconfig):

    drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done':
    drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
  ^

cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer.

Note that several other fields in struct cdmac_bd are also too small to
hold physical addresses on 64-bit platforms.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: don't try to move pinned BOs

[ Upstream commit 6edc6910ba4cd6eab309263539c8f09b8ad772bf ]

Never try to move pinned BOs during CS.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: fortify xfs_alloc_buftarg error handling

[ Upstream commit d210a9874b8f6166579408131cb74495caff1958 ]

percpu_counter_init failure path doesn't clean up &btp->bt_lru list.
Call list_lru_destroy in that error path. Similarly register_shrinker
error path is not handled.

While it is unlikely to trigger these error path, it is not impossible
especially the later might fail with large NUMAs.  Let's handle the
failure to make the code more robust.

Noticed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Fix an error handling path in 'bnxt_get_module_eeprom()'

[ Upstream commit dea521a2b9f96e905fa2bb2f95e23ec00c2ec436 ]

Error code returned by 'bnxt_read_sfp_module_eeprom_info()' is handled a
few lines above when reading the A0 portion of the EEPROM.
The same should be done when reading the A2 portion of the EEPROM.

In order to correctly propagate an error, update 'rc' in this 2nd call as
well, otherwise 0 (success) is returned.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (pmbus) Use 64bit math for DIRECT format values

[ Upstream commit bd467e4eababe4c04272c1e646f066db02734c79 ]

Power values in the 100s of watt range can easily blow past
32bit math limits when processing everything in microwatts.

Use 64bit math instead to avoid these issues on common 32bit ARM
BMC platforms.

Fixes: 442aba78728e ("hwmon: PMBus device driver")
Signed-off-by: Robert Lippert <rlippert@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lockd: fix "list_add double add" caused by legacy signal interface

[ Upstream commit 81833de1a46edce9ca20cfe079872ac1c20ef359 ]

restart_grace() uses hardcoded init_net.
It can cause to "list_add double add" in following scenario:

1) nfsd and lockd was started in several net namespaces
2) nfsd in init_net was stopped (lockd was not stopped because
 it have users from another net namespaces)
3) lockd got signal, called restart_grace() -> set_grace_period()
 and enabled lock_manager in hardcoded init_net.
4) nfsd in init_net is started again,
 its lockd_up() calls set_grace_period() and tries to add
 lock_manager into init_net 2nd time.

Jeff Layton suggest:
"Make it safe to call locks_start_grace multiple times on the same
lock_manager. If it's already on the global grace_list, then don't try
to add it again.  (But we don't intentionally add twice, so for now we
WARN about that case.)

With this change, we also need to ensure that the nfsd4 lock manager
initializes the list before we call locks_start_grace. While we're at
it, move the rest of the nfsd_net initialization into
nfs4_state_create_net. I see no reason to have it spread over two
functions like it is today."

Suggested patch was updated to generate warning in described situation.

Suggested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: check for use of the closed special stateid

[ Upstream commit ae254dac721d44c0bfebe2795df87459e2e88219 ]

Prevent the use of the closed (invalid) special stateid by clients.

Signed-off-by: Andrew Elble <aweits@rit.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

grace: replace BUG_ON by WARN_ONCE in exit_net hook

[ Upstream commit b872285751c1af010e12d02bce7069e2061a58ca ]

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Ensure we check stateid validity in the seqid operation checks

[ Upstream commit 9271d7e509c1bfc0b9a418caec29ec8d1ac38270 ]

After taking the stateid st_mutex, we want to know that the stateid
still represents valid state before performing any non-idempotent
actions.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: CLOSE SHOULD return the invalid special stateid for NFSv4.x (x>0)

[ Upstream commit fb500a7cfee7f2f447d2bbf30cb59629feab6ac1 ]

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

auxdisplay: img-ascii-lcd: Only build on archs that have IOMEM

[ Upstream commit 141cbfba1d0502006463aa80f57c64086226af1a ]

This avoids the MODPOST error:

  ERROR: "devm_ioremap_resource" [drivers/auxdisplay/img-ascii-lcd.ko] undefined!

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netfront: remove warning when unloading module

[ Upstream commit 5b5971df3bc2775107ddad164018a8a8db633b81 ]

v2:
 * Replace busy wait with wait_event()/wake_up_all()
 * Cannot garantee that at the time xennet_remove is called, the
   xen_netback state will not be XenbusStateClosed, so added a
   condition for that
 * There's a small chance for the xen_netback state is
   XenbusStateUnknown by the time the xen_netfront switches to Closed,
   so added a condition for that.

When unloading module xen_netfront from guest, dmesg would output
warning messages like below:

  [  105.236836] xen:grant_table: WARNING: g.e. 0x903 still in use!
  [  105.236839] deferring g.e. 0x903 (pfn 0x35805)

This problem relies on netfront and netback being out of sync. By the time
netfront revokes the g.e.'s netback didn't have enough time to free all of
them, hence displaying the warnings on dmesg.

The trick here is to make netfront to wait until netback frees all the g.e.'s
and only then continue to cleanup for the module removal, and this is done by
manipulating both device states.

Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: always free inline data before resetting inode fork during ifree

[ Upstream commit 98c4f78dcdd8cec112d1cbc5e9a792ee6e5ab7a6 ]

In xfs_ifree, we reset the data/attr forks to extents format without
bothering to free any inline data buffer that might still be around
after all the blocks have been truncated off the file.  Prior to commit
43518812d2 ("xfs: remove support for inlining data/extents into the
inode fork") nobody noticed because the leftover inline data after
truncation was small enough to fit inside the inline buffer inside the
fork itself.

However, now that we've removed the inline buffer, we /always/ have to
free the inline data buffer or else we leak them like crazy.  This test
was found by turning on kmemleak for generic/001 or generic/388.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Fix rflags cache during vCPU reset

[ Upstream commit c37c28730bb031cc8a44a130c2555c0f3efbe2d0 ]

Reported by syzkaller:

   *** Guest State ***
   CR0: actual=0x0000000080010031, shadow=0x0000000060000010, gh_mask=fffffffffffffff7
   CR4: actual=0x0000000000002061, shadow=0x0000000000000000, gh_mask=ffffffffffffe8f1
   CR3 = 0x000000002081e000
   RSP = 0x000000000000fffa  RIP = 0x0000000000000000
   RFLAGS=0x00023000         DR7 = 0x00000000000000
          ^^^^^^^^^^
   ------------[ cut here ]------------
   WARNING: CPU: 6 PID: 24431 at /home/kernel/linux/arch/x86/kvm//x86.c:7302 kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm]
   CPU: 6 PID: 24431 Comm: reprotest Tainted: G        W  OE   4.14.0+ #26
   RIP: 0010:kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm]
   RSP: 0018:ffff880291d179e0 EFLAGS: 00010202
   Call Trace:
    kvm_vcpu_ioctl+0x479/0x880 [kvm]
    do_vfs_ioctl+0x142/0x9a0
    SyS_ioctl+0x74/0x80
    entry_SYSCALL_64_fastpath+0x23/0x9a

The failed vmentry is triggered by the following beautified testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[5];
    int main()
    {
        struct kvm_debugregs dr = { 0 };

        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);
        struct kvm_guest_debug debug = {
                .control = 0xf0403,
                .arch = {
                        .debugreg[6] = 0x2,
                        .debugreg[7] = 0x2
                }
        };
        ioctl(r[4], KVM_SET_GUEST_DEBUG, &debug);
        ioctl(r[4], KVM_RUN, 0);
    }

which testcase tries to setup the processor specific debug
registers and configure vCPU for handling guest debug events through
KVM_SET_GUEST_DEBUG.  The KVM_SET_GUEST_DEBUG ioctl will get and set
rflags in order to set TF bit if single step is needed. All regs' caches
are reset to avail and GUEST_RFLAGS vmcs field is reset to 0x2 during vCPU
reset. However, the cache of rflags is not reset during vCPU reset. The
function vmx_get_rflags() returns an unreset rflags cache value since
the cache is marked avail, it is 0 after boot. Vmentry fails if the
rflags reserved bit 1 is 0.

This patch fixes it by resetting both the GUEST_RFLAGS vmcs field and
its cache to 0x2 during vCPU reset.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: X86: Fix softlockup when get the current kvmclock

[ Upstream commit e70b57a6ce4e8b92a56a615ae79bdb2bd66035e7 ]

 watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [qemu-system-x86:10185]
 CPU: 6 PID: 10185 Comm: qemu-system-x86 Tainted: G           OE   4.14.0-rc4+ #4
 RIP: 0010:kvm_get_time_scale+0x4e/0xa0 [kvm]
 Call Trace:
  get_time_ref_counter+0x5a/0x80 [kvm]
  kvm_hv_process_stimers+0x120/0x5f0 [kvm]
  kvm_arch_vcpu_ioctl_run+0x4b4/0x1690 [kvm]
  kvm_vcpu_ioctl+0x33a/0x620 [kvm]
  do_vfs_ioctl+0xa1/0x5d0
  SyS_ioctl+0x79/0x90
  entry_SYSCALL_64_fastpath+0x1e/0xa9

This can be reproduced when running kvm-unit-tests/hyperv_stimer.flat and
cpu-hotplug stress simultaneously. __this_cpu_read(cpu_tsc_khz) returns 0
(set in kvmclock_cpu_down_prep()) when the pCPU is unhotplug which results
in kvm_get_time_scale() gets into an infinite loop.

This patch fixes it by treating the unhotplug pCPU as not using master clock.

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: remove unneeded i_version bump

[ Upstream commit 9f97df50c52c2887432debb6238f4e43567386a5 ]

The i_version field in reiserfs is not initialized and is only ever
updated here. Nothing ever views it, so just remove it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix deadlock when writing out space cache

[ Upstream commit b77000ed558daa3bef0899d29bf171b8c9b5e6a8 ]

If we fail to prepare our pages for whatever reason (out of memory in
our case) we need to make sure to drop the block_group->data_rwsem,
otherwise hilarity ensues.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add label and use existing unlocking code ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix the update of path metric for RANN frame

[ Upstream commit fbbdad5edf0bb59786a51b94a9d006bc8c2da9a2 ]

The previous path metric update from RANN frame has not considered
the own link metric toward the transmitting mesh STA. Fix this.

Reported-by: Michael65535
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

openvswitch: fix the incorrect flow action alloc size

[ Upstream commit 67c8d22a73128ff910e2287567132530abcf5b71 ]

If we want to add a datapath flow, which has more than 500 vxlan outputs'
action, we will get the following error reports:
  openvswitch: netlink: Flow action size 32832 bytes exceeds max
  openvswitch: netlink: Flow action size 32832 bytes exceeds max
  openvswitch: netlink: Actions may not be safe on all matching packets
  ... ...

It seems that we can simply enlarge the MAX_ACTIONS_BUFSIZE to fix it, but
this is not the root cause. For example, for a vxlan output action, we need
about 60 bytes for the nlattr, but after it is converted to the flow
action, it only occupies 24 bytes. This means that we can still support
more than 1000 vxlan output actions for a single datapath flow under the
the current 32k max limitation.

So even if the nla_len(attr) is larger than MAX_ACTIONS_BUFSIZE, we
shouldn't report EINVAL and keep it move on, as the judgement can be
done by the reserve_sfa_size.

Signed-off-by: zhangliping <zhangliping02@baidu.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: Fix SDMA oversubsription handling

[ Upstream commit 8c946b8988acec785bcf67088b6bd0747f36d2d3 ]

SDMA only supports a fixed number of queues. HWS cannot handle
oversubscription.

Signed-off-by: shaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: Fix SDMA ring buffer size calculation

[ Upstream commit d12fb13f23199faa7e536acec1db49068e5a067d ]

ffs function return the position of the first bit set on 1 based.
(bit zero returns 1).

Signed-off-by: shaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Fix SDMA load/unload sequence on HWS disabled mode

[ Upstream commit cf21654b40968609779751b34e7923180968fe5b ]

Fix the SDMA load and unload sequence as suggested by HW document.

Signed-off-by: shaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: check return value of register_shrinker

[ Upstream commit 6c4ca1e36cdc1a0a7a84797804b87920ccbebf51 ]

register_shrinker is now __must_check, so check it to kill a warning.
Caller of bch_btree_cache_alloc in super.c appropriately checks return
value so this is fully plumbed through.

This V2 fixes checkpatch warnings and improves the commit description,
as I was too hasty getting the previous version out.

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Vojtech Pavlik <vojtech@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Add Loongson machine dependencies

[ Upstream commit 0d307935fefa6389eb726c6362351c162c949101 ]

The MIPS loongson cpufreq drivers don't build unless configured for the
correct machine type, due to dependency on machine specific architecture
headers and symbols in machine specific platform code.

More specifically loongson1-cpufreq.c uses RST_CPU_EN and RST_CPU,
neither of which is defined in asm/mach-loongson32/regs-clk.h unless
CONFIG_LOONGSON1_LS1B=y, and loongson2_cpufreq.c references
loongson2_clockmod_table[], which is only defined in
arch/mips/loongson64/lemote-2f/clock.c, i.e. when
CONFIG_LEMOTE_MACH2F=y.

Add these dependencies to Kconfig to avoid randconfig / allyesconfig
build failures (e.g. when based on BMIPS which also has a cpufreq
driver).

Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: ioapic: Preserve read-only values in the redirection table

[ Upstream commit b200dded0a6974a3b69599832b2203483920ab25 ]

According to 82093AA (IOAPIC) manual, Remote IRR and Delivery Status are
read-only. QEMU implements the bits as RO in commit 479c2a1cb7fb
("ioapic: keep RO bits for IOAPIC entry").

Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / bus: Leave modalias empty for devices which are not present

[ Upstream commit 10809bb976648ac58194a629e3d7af99e7400297 ]

Most Bay and Cherry Trail devices use a generic DSDT with all possible
peripheral devices present in the DSDT, with their _STA returning 0x00 or
0x0f based on AML variables which describe what is actually present on
the board.

Since ACPI device objects with a 0x00 status (not present) still get an
entry under /sys/bus/acpi/devices, and those entry had an acpi:PNPID
modalias, userspace would end up loading modules for non present hardware.

This commit fixes this by leaving the modalias empty for non present
devices. This results in 10 modules less being loaded with a generic
distro kernel config on my Cherry Trail test-device (a GPD pocket).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered

[ Upstream commit a8bfec2930525808c01f038825d1df3904638631 ]

Some OSes (Linux, Xen) use this behavior to clear the Remote IRR bit for
IOAPICs without an EOI register. They simulate the EOI message manually
by changing the trigger mode to edge and then back to level, with the
entry being masked during this.

QEMU implements this feature in commit ed1263c363c9
("ioapic: clear remote irr bit for edge-triggered interrupts")

As a side effect, this commit removes an incorrect behavior where Remote
IRR was cleared when the redirection table entry was rewritten. This is not
consistent with the manual and also opens an opportunity for a strange
behavior when a redirection table entry is modified from an interrupt
handler that handles the same entry: The modification will clear the
Remote IRR bit even though the interrupt handler is still running.

Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race

[ Upstream commit 0fc5a36dd6b345eb0d251a65c236e53bead3eef7 ]

KVM uses ioapic_handled_vectors to track vectors that need to notify the
IOAPIC on EOI. The problem is that IOAPIC can be reconfigured while an
interrupt with old configuration is pending or running and
ioapic_handled_vectors only remembers the newest configuration;
thus EOI from the old interrupt is not delievered to the IOAPIC.

A previous commit db2bdcbbbd32
("KVM: x86: fix edge EOI and IOAPIC reconfig race")
addressed this issue by adding pending edge-triggered interrupts to
ioapic_handled_vectors, fixing this race for edge-triggered interrupts.
The commit explicitly ignored level-triggered interrupts,
but this race applies to them as well:

1) IOAPIC sends a level triggered interrupt vector to VCPU0
2) VCPU0's handler deasserts the irq line and reconfigures the IOAPIC
   to route the vector to VCPU1. The reconfiguration rewrites only the
   upper 32 bits of the IOREDTBLn register. (Causes KVM to update
   ioapic_handled_vectors for VCPU0 and it no longer includes the vector.)
3) VCPU0 sends EOI for the vector, but it's not delievered to the
   IOAPIC because the ioapic_handled_vectors doesn't include the vector.
4) New interrupts are not delievered to VCPU1 because remote_irr bit
   is set forever.

Therefore, the correct behavior is to add all pending and running
interrupts to ioapic_handled_vectors.

This commit introduces a slight performance hit similar to
commit db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race")
for the rare case that the vector is reused by a non-IOAPIC source on
VCPU0. We prefer to keep solution simple and not handle this case just
as the original commit does.

Fixes: db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race")
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: X86: Fix operand/address-size during instruction decoding

[ Upstream commit 3853be2603191829b442b64dac6ae8ba0c027bf9 ]

Pedro reported:
  During tests that we conducted on KVM, we noticed that executing a "PUSH %ES"
  instruction under KVM produces different results on both memory and the SP
  register depending on whether EPT support is enabled. With EPT the SP is
  reduced by 4 bytes (and the written value is 0-padded) but without EPT support
  it is only reduced by 2 bytes. The difference can be observed when the CS.DB
  field is 1 (32-bit) but not when it's 0 (16-bit).

The internal segment descriptor cache exist even in real/vm8096 mode. The CS.D
also should be respected instead of just default operand/address-size/66H
prefix/67H prefix during instruction decoding. This patch fixes it by also
adjusting operand/address-size according to CS.D.

Reported-by: Pedro Fonseca <pfonseca@cs.washington.edu>
Tested-by: Pedro Fonseca <pfonseca@cs.washington.edu>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Pedro Fonseca <pfonseca@cs.washington.edu>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Don't re-execute instruction when not passing CR2 value

[ Upstream commit 9b8ae63798cb97e785a667ff27e43fa6220cb734 ]

In case of instruction-decode failure or emulation failure,
x86_emulate_instruction() will call reexecute_instruction() which will
attempt to use the cr2 value passed to x86_emulate_instruction().
However, when x86_emulate_instruction() is called from
emulate_instruction(), cr2 is not passed (passed as 0) and therefore
it doesn't make sense to execute reexecute_instruction() logic at all.

Fixes: 51d8b66199e9 ("KVM: cleanup emulate_instruction")
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: emulator: Return to user-mode on L1 CPL=0 emulation failure

[ Upstream commit 1f4dcb3b213235e642088709a1c54964d23365e9 ]

On this case, handle_emulation_failure() fills kvm_run with
internal-error information which it expects to be delivered
to user-mode for further processing.
However, the code reports a wrong return-value which makes KVM to never
return to user-mode on this scenario.

Fixes: 6d77dbfc88e3 ("KVM: inject #UD if instruction emulation fails and exit to
userspace")

Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpupower : Fix cpupower working when cpu0 is offline

[ Upstream commit dbdc468f35ee827cab2753caa1c660bdb832243a ]

cpuidle_monitor used to assume that cpu0 is always online which is not
a valid assumption on POWER machines. This patch fixes this by getting
the cpu on which the current thread is running, instead of always using
cpu0 for monitoring which may not be online.

Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpupowerutils: bench - Fix cpu online check

[ Upstream commit 53d1cd6b125fb9d69303516a1179ebc3b72f797a ]

cpupower_is_cpu_online was incorrectly checking for 0. This patch fixes
this by checking for 1 when the cpu is online.

Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>