tools/firmware/Makefile: CONFIG_PV_SHIM: enable only on x86_64

Previously this was *dis*abled for x86_*32*.  But if someone should
run some of this Makefile on ARM, say, it ought not to be built
either.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Gbp-Pq: Name 0014-tools-firmware-Makefile-CONFIG_PV_SHIM-enable-only-o.patch

tools/firmware/Makfile: Respect caller's CONFIG_PV_SHIM

This makes it easier to disable the shim build.  (In Debian we need to
build the shim separately because it needs different compiler flags
and a different XEN_COMPILE_ARCH.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Gbp-Pq: Name 0013-tools-firmware-Makfile-Respect-caller-s-CONFIG_PV_SH.patch

Revert "pvshim: make PV shim build selectable from configure"

This reverts commit 8845155c831c59e867ee3dd31ee63e0cc6c7dcf2.

This upstream change changes stuff that breaks our very fragile mess
that builds the shim when it needs to, and doesn't when it should not.

The result is that it's missing in the end for the i386 build... :|

    dh_install: warning: Cannot find (any matches for)
    "usr/lib/debug/usr/lib/xen-*/boot/*" (tried in ., debian/tmp)

    dh_install: warning: xen-utils-4.14 missing files:
    usr/lib/debug/usr/lib/xen-*/boot/*
    dh_install: error: missing files, aborting

Gbp-Pq: Name 0012-Revert-pvshim-make-PV-shim-build-selectable-from-con.patch

.gitignore: Add configure output which we always delete and regenerate

Signed-off-by: Ian Jackson <ian.jackson@citrix.com>
Gbp-Pq: Name 0011-.gitignore-Add-configure-output-which-we-always-dele.patch

autoconf: Provide libexec_libdir_suffix

This is going to be used to put libfsimage.so into a path containing
the multiarch triplet.

Signed-off-by: Ian Jackson <ian.jackson@citrix.com>
Gbp-Pq: Name 0010-autoconf-Provide-libexec_libdir_suffix.patch

tools-libfsimage-prefix.diff

\o/

Gbp-Pq: Name 0009-tools-libfsimage-prefix.diff.patch

Do not build the instruction emulator

Signed-off-by: Ian Jackson <ian.jackson@citrix.com>
Gbp-Pq: Name 0008-Do-not-build-the-instruction-emulator.patch

tools/tests/x86_emulator: Pass -no-pie -fno-pic to gcc on x86_32

The current build fails with GCC6 on Debian sid i386 (unstable):

 /tmp/ccqjaueF.s: Assembler messages:
 /tmp/ccqjaueF.s:3713: Error: missing or invalid displacement expression `vmovd_to_reg_len@GOT'

This is due to the combination of GCC6, and Debian's decision to
enable some hardening flags by default (to try to make runtime
addresses less predictable):
  https://wiki.debian.org/Hardening/PIEByDefaultTransition

This is of no benefit for the x86 instruction emulator test, which is
a rebuild of the emulator code for testing purposes only.  So pass
options to disable this.

These options will be no-ops if they are the same as the compiler
default.

On amd64, the -fno-pic breaks the build in a different way.  So do
this only on i386.

Signed-off-by: Ian Jackson <ian.jackson@citrix.com>
CC: Jan Beulich <jbeulich@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
Gbp-Pq: Topic misc
Gbp-Pq: Name toolstestsx86_emulator-pass--no-pie--fno.patch

Remove static solaris support from pygrub

Patch-Name: tools-pygrub-remove-static-solaris-support

Gbp-Pq: Topic misc
Gbp-Pq: Name tools-pygrub-remove-static-solaris-support

Do not ship COPYING into /usr/include

This is not wanted in Debian.  COPYING ends up in
/usr/share/doc/xen-*copyright.

Patch-Name: tools-include-no-COPYING.diff

Signed-off-by: Ian Jackson <ian.jackson@citrix.com>
Gbp-Pq: Name 0005-Do-not-ship-COPYING-into-usr-include.patch

config-prefix.diff

Patch-Name: config-prefix.diff

Gbp-Pq: Topic prefix-abiname
Gbp-Pq: Name config-prefix.diff

version

Gbp-Pq: Name 0003-version.patch

Delete configure output

These autogenerated files are not useful in Debian; dh_autoreconf will
regenerate them.

If this patch does not apply when rebasing, you can simply delete the
files again.

Signed-off-by: Ian Jackson <ian.jackson@citrix.com>
Gbp-Pq: Name 0002-Delete-configure-output.patch

Delete config.sub and config.guess

dh_autoreconf will provide these back.

If this patch does not apply when rebasing, you can simply delete the
files again.

Signed-off-by: Ian Jackson <ian.jackson@citrix.com>
Gbp-Pq: Name 0001-Delete-config.sub-and-config.guess.patch

xen (4.14.3+32-g9de3671772-1~deb11u1) bullseye-security; urgency=medium

  * d/salsa-ci.yml: Set RELEASE variable to bullseye
  * Rebuild for bullseye-security

[dgit import unpatched xen 4.14.3+32-g9de3671772-1~deb11u1]

Import xen_4.14.3+32-g9de3671772-1~deb11u1.debian.tar.xz

[dgit import tarball xen 4.14.3+32-g9de3671772-1~deb11u1 xen_4.14.3+32-g9de3671772-1~deb11u1.debian.tar.xz]

Import xen_4.14.3+32-g9de3671772.orig.tar.xz

[dgit import orig xen_4.14.3+32-g9de3671772.orig.tar.xz]