aws 0.23 is not used any longer, so read-only S3 import won't be
supported yet when building with stack.
That commit broke the build on windows, because the new version of Win32 that
was included (because the old one does not work with this lts version)
needs a version of filepath that is newer than the one bundled with the
ghc in that lts version. It is not possible to override that to a newer
filepath.
Seems that the only solution to get aws 0.23 will be to wait for a ghc that
contains filepath 1.4.100.0. No ghc yet contains it. (Backporting the Win32
fix to a point release version that does not include this bleeding edge
filepath would also resolve it, but seems unlikely to happen.)
Joey Hess [Wed, 9 Nov 2022 20:24:37 +0000 (16:24 -0400)]
export: fix multi-file delete bug
export: Fix a bug that left a file on a special remote when two files with
the same content were both deleted in the exported tree.
Case of the wrong data structure leading to the wrong result.
The DiffMap now contains all the old filenames, and all the new filenames.
Note that, when 2 files with the same content are both renamed,
it only renames the first, but deletes and re-exports the second.
Improving that is possible, but it would need to use a different temporary
filename. Anyway, that is an unusual case, and there are known to be other
unusual cases where export does not rename with maximum efficiency, IIRC.
(Or maybe this is the case that I remember?)
Joey Hess [Mon, 7 Nov 2022 18:44:51 +0000 (14:44 -0400)]
avoid splitting repo tests into too small parts around -J16
The initTests have to be run once per part, and a point of diminishing
returns can be reached where more work is being done to set up for 1 or
2 tests than to run them.
This is better than a hard cap of -J8 or so, because it lets other
things than these particular tests still be parallelized at -J16.
Joey Hess [Fri, 4 Nov 2022 19:42:43 +0000 (15:42 -0400)]
complete support for S3 signature=anonymous
aws-0.23 has been released.
When built with an older aws, initremote will error out when run
with signature=anonymous. And when a remote has been initialized with
that by a version of git-annex that does support it, older versions will
fail when the remote is accessed, with a useful error message.
Joey Hess [Wed, 26 Oct 2022 19:44:06 +0000 (15:44 -0400)]
Make git-annex enable-tor work when using the linux standalone build
Clean the standalone environment before running the su command
to run "sh". Otherwise, PATH leaked through, causing it to run
git-annex.linux/bin/sh, but GIT_ANNEX_DIR was not set,
which caused that script to not work:
[2022-10-26 15:07:02.145466106] (Utility.Process) process [938146] call: pkexec ["sh","-c","cd '/home/joey/tmp/git-annex.linux/r' && '/home/joey/tmp/git-annex.linux/git-annex' 'enable-tor' '1000'"]
/home/joey/tmp/git-annex.linux/bin/sh: 4: exec: /exe/sh: not found
Changed programPath to not use GIT_ANNEX_PROGRAMPATH,
but instead run the scripts at the top of GIT_ANNEX_DIR.
That works both when the standalone environment is set up, and when it's
not.
Joey Hess [Wed, 26 Oct 2022 18:23:06 +0000 (14:23 -0400)]
use lookupKeyStaged in --batch code paths
Make --batch mode handle unstaged annexed files consistently whether the
file is unlocked or not. Before this, a unstaged locked file
would have the symlink on disk examined and operated on in --batch mode,
while an unstaged unlocked file would be skipped.
Note that, when not in batch mode, unstaged files are skipped over too.
That is actually somewhat new behavior; as late as 7.20191114 a
command like `git-annex whereis .` would operate on unstaged locked
files and skip over unstaged unlocked files. That changed during
optimisation of CmdLine.Seek with apparently little fanfare or notice.
Turns out that rmurl still behaved that way when given an unstaged file
on the command line. It was changed to use lookupKeyStaged to
handle its --batch mode. That also affected its non-batch mode, but
since that's just catching up to the change earlier made to most
other commands, I have not mentioed that in the changelog.
It may be that other uses of lookupKey should also change to
lookupKeyStaged. But it may also be that would slow down some things,
or lead to unwanted behavior changes, so I've kept the changes minimal
for now.
An example of a place where the use of lookupKey is better than
lookupKeyStaged is in Command.AddUrl, where it looks to see if the file
already exists, and adds the url to the file when so. It does not matter
there whether the file is staged or not (when it's locked). The use of
lookupKey in Command.Unused likewise seems good (and faster).
Joey Hess [Mon, 17 Oct 2022 19:56:19 +0000 (15:56 -0400)]
More robust handling of ErrorBusy when writing to sqlite databases
While ErrorBusy and other exceptions were caught and the write retried for
up to 10 seconds, it was still possible for git-annex to eventually
give up and error out without writing to the database. Now it will retry
as long as necessary.
This does mean that, if one git-annex process is suspended just as sqlite
has locked the database for writing, another git-annex that tries to write
it it might get stuck retrying forever. But, that could already happen when
opening the sqlite database, which retries forever on ErrorBusy. This is an
area where git-annex is known to not behave well, there's a todo about the
general case of it.
Probably not cooincidentally, I emailed sqlite-users about such a
situation in Feb 2015.
https://www.mail-archive.com/sqlite-users@mailinglists.sqlite.org/msg90580.html
Noone ever replied to me, but at least now I understand why it does that.
Since it's documented now, it's no longer a bug.
Joey Hess [Wed, 12 Oct 2022 19:21:19 +0000 (15:21 -0400)]
avoid uncessary keys db writes; doubled speed!
When running eg git-annex get, for each file it has to read from and
write to the keys database. But it's reading exclusively from one table,
and writing to a different table. So, it is not necessary to flush the
write to the database before reading. This avoids writing the database
once per file, instead it will buffer 1000 changes before writing.
Benchmarking getting 1000 small files from a local origin,
git-annex get now takes 13.62s, down from 22.41s!
git-annex drop now takes 9.07s, down from 18.63s!
Wowowowowowowow!
(It would perhaps have been better if there were separate databases for
the two tables. At least it would have avoided this complexity. Ah well,
this is better than splitting the table in a annex.version upgrade.)
Joey Hess [Wed, 12 Oct 2022 17:50:46 +0000 (13:50 -0400)]
avoid flushing keys db queue after each Annex action
The flush was only done Annex.run' to make sure that the queue was flushed
before git-annex exits. But, doing it there means that as soon as one
change gets queued, it gets flushed soon after, which contributes to
excessive writes to the database, slowing git-annex down.
(This does not yet speed git-annex up, but it is a stepping stone to
doing so.)
Database queues do not autoflush when garbage collected, so have to
be flushed explicitly. I don't think it's possible to make them
autoflush (except perhaps if git-annex sqitched to using ResourceT..).
The comment in Database.Keys.closeDb used to be accurate, since the
automatic flushing did mean that all writes reached the database even
when closeDb was not called. But now, closeDb or flushDb needs to be
called before stopping using an Annex state. So, removed that comment.
In Remote.Git, change to using quiesce everywhere that it used to use
stopCoProcesses. This means that uses on onLocal in there are just as
slow as before. I considered only calling closeDb on the local git remotes
when git-annex exits. But, the reason that Remote.Git calls stopCoProcesses
in each onLocal is so as not to leave git processes running that have files
open on the remote repo, when it's on removable media. So, it seemed to make
sense to also closeDb after each one, since sqlite may also keep files
open. Although that has not seemed to cause problems with removable
media so far. It was also just easier to quiesce in each onLocal than
once at the end. This does likely leave performance on the floor, so
could be revisited.
In Annex.Content.saveState, there was no reason to close the db,
flushing it is enough.
The rest of the changes are from auditing for Annex.new, and making
sure that quiesce is called, after any action that might possibly need
it.
After that audit, I'm pretty sure that the change to Annex.run' is
safe. The only concern might be that this does let more changes get
queued for write to the db, and if git-annex is interrupted, those will be
lost. But interrupting git-annex can obviously already prevent it from
writing the most recent change to the db, so it must recover from such
lost data... right?
Joey Hess [Mon, 10 Oct 2022 20:52:18 +0000 (16:52 -0400)]
S3: Support signature=anonymous to access a S3 bucket anonymously
This can be used, for example, with importtree=yes to import from a public
bucket.
This needs a patch that has not yet landed in the aws library, and will
need to be adjusted to support compiling with old versions of the library,
so is not yet suitable for merging.
See https://github.com/aristidb/aws/pull/281
The stack.yaml changes are provided to show how to build against the aws
fork and will need to be reverted as well.
Joey Hess [Fri, 7 Oct 2022 17:19:17 +0000 (13:19 -0400)]
take lock in checkLogFile and calcLogFile
move: Fix openFile crash with -J
This does make them a bit slower, although usually the log file is not
very big, so even when it's being rewritten, they will not block for
long taking the lock. Still, little slowdowns may add up when moving a lot
file files.
A less expensive fix would be to use something lower level than openFile
that does not check if the file is already open for write by another
thread. But GHC does not seem to provide anything convenient; even mkFD
checks for a writing thread.
fullLines is no longer necessary since these functions no longer will
read the file while it's being written.
Joey Hess [Mon, 3 Oct 2022 17:48:40 +0000 (13:48 -0400)]
avoid combining multiple words provided to trust/untrust/dead
* trust, untrust, semitrust, dead: Fix behavior when provided with
multiple repositories to operate on.
* trust, untrust, semitrust, dead: When provided with no parameters,
do not operate on a repository that has an empty name.
The man page and usage already indicated that multiple repos could be
provided to these commands, but they actually used unwords to combine
everything into string, and found a repo matching that string. This was
especially bad when no parameters resulted in the empty string and some
repo happened to have an empty description.
This does change the behavior, and it's possible someone relied on the
current behavior to eg, trust a repo by name with the name not quoted into
a single parameter. But fixing the empty string bug and matching the
documentation are worth breaking that usage.
Note that git-annex init/reinit do still unwords multiple parameters when
provided to them. That is inconsistent behavior, but it certianly seems
possible that something does run git-annex init with an unquoted
description, and I don't think it's worth breaking that just to make it more
consistent with these other commands.
projects / git-annex.git / log