Kevin Ottens [Wed, 12 Aug 2020 16:38:57 +0000 (18:38 +0200)]
Size cleanups in TestChunkingNG
Some of the comments didn't match the size or were missing. This also
means reducing one of the 150 MB payloads left behind reducing the
execution time by a few more seconds. This is now around 30s execution
time which is more acceptable.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Olivier Goffart [Fri, 29 Jun 2018 08:43:01 +0000 (10:43 +0200)]
Upload: Store the size in the UploadInfo, and compare it when resolving potential conflict
This is about the conflicts that happens when the file has been uploaded
correctly to the server, but the etag was not recieved because the connection
was closed before we got the reply.
We used to compare only the mtime when comparing the uploaded file and the
existing file. However, to be perfectly correct, we also should check the
size.
This was found because TestChunkingNG::connectionDroppedBeforeEtagRecieved is
flaky. Example of faillure found in https://drone.owncloud.com/owncloud/client/481/5
while testing PR #6626
(very trimmed log:)
06-29 07:58:02:015 [ info sync.csync.csync ]: ## Starting local discovery ##
06-29 07:58:02:016 [ info sync.csync.updater ]: Database entry found, compare: 1530259082 <-> 1530259051, etag: <-> 1644a8c8750, inode: 1935629 <-> 1935629, size: 301 <-> 300, perms: 0 <-> ff, type: 0 <-> 0, checksum: <-> SHA1:cc9adedebe27a6259efb8d6ed09f4f2eff559ad1, ignore: 0
06-29 07:58:02:016 [ info sync.csync.updater ]: file: A/a0, instruction: INSTRUCTION_EVAL <<=
06-29 07:58:02:972 [ warning sync.networkjob ]: QNetworkReply::NetworkError(OperationCanceledError) "Connection timed out" QVariant(Invalid)
.. next sync...
06-29 07:58:02:980 [ info sync.engine ]: #### Discovery start ####################################################
06-29 07:58:02:981 [ info sync.csync.csync ]: ## Starting local discovery ##
06-29 07:58:02:983 [ info sync.csync.updater ]: Database entry found, compare: 1530259082 <-> 1530259051, etag: <-> 1644a8c8750, inode: 1935629 <-> 1935629, size: 302 <-> 300, perms: 0 <-> ff, type: 0 <-> 0, checksum: <-> SHA1:cc9adedebe27a6259efb8d6ed09f4f2eff559ad1, ignore: 0
06-29 07:58:02:983 [ info sync.csync.updater ]: file: A/a0, instruction: INSTRUCTION_EVAL <<=
06-29 07:58:02:985 [ info sync.csync.csync ]: ## Starting remote discovery ##
06-29 07:58:02:985 [ info sync.networkjob ]: OCC::LsColJob created for "http://localhost/owncloud" + "" "OCC::DiscoverySingleDirectoryJob"
06-29 07:58:02:987 [ info sync.csync.updater ]: Database entry found, compare: 1530259082 <-> 1530259051, etag: 1644a8c8b26 <-> 1644a8c8750, inode: 0 <-> 1935629, size: 301 <-> 300, perms: ff <-> ff, type: 0 <-> 0, checksum: SHA1:5adcdac9608ae0811247f07f4cf1ab0a2ef99154 <-> SHA1:cc9adedebe27a6259efb8d6ed09f4f2eff559ad1, ignore: 0
06-29 07:58:02:987 [ info sync.csync.updater ]: file: A/a0, instruction: INSTRUCTION_EVAL <<=
06-29 07:58:02:989 [ info sync.csync.csync ]: Update detection for remote replica took 0.004 seconds walking 13 files
06-29 07:58:02:990 [ info sync.engine ]: #### Discovery end #################################################### 9 ms
06-29 07:58:02:990 [ info sync.database ]: Updating file record for path: "A/a0" inode: 1935629 modtime: 1530259082 type: 0 etag: "1644a8c8b26" fileId: "16383ea4" remotePerm: "WDNVCKR" fileSize: 301 checksum: "SHA1:cc9adedebe27a6259efb8d6ed09f4f2eff559ad1"
06-29 07:58:02:990 [ info sync.csync.reconciler ]: INSTRUCTION_UPDATE_METADATA client file: A/a0
06-29 07:58:02:990 [ info sync.csync.csync ]: Reconciliation for local replica took 0 seconds visiting 13 files.
06-29 07:58:02:990 [ info sync.csync.reconciler ]: INSTRUCTION_UPDATE_METADATA server dir: A
06-29 07:58:02:990 [ info sync.csync.csync ]: Reconciliation for remote replica took 0 seconds visiting 13 files.
06-29 07:58:02:990 [ info sync.engine ]: #### Reconcile end #################################################### 9 ms
06-29 07:58:02:990 [ info sync.database ]: Updating local metadata for: "A/a0" 1530259082 302 1935629
FAIL! : TestChunkingNG::connectionDroppedBeforeEtagRecieved(small file) '!fakeFolder.syncOnce()' returned FALSE. ()
Use smaller files so the test run faster.
Particulary usefull for TestChunkingNG::connectionDroppedBeforeEtagRecieved
Which had become so much slower after 2638332dc63cd79410b6fea5a24449696d63d3f2
increased the timeout for bigger files
Kevin Ottens [Wed, 12 Aug 2020 09:22:16 +0000 (11:22 +0200)]
Enable "trivial" modernize clang-tidy checks
This is a bunch of modernize checks which we don't hit at all. This is
an easy win and also make sure those old constructs won't creep up
behind our back.
Note that some of them won't trigger until we bump our C++ baseline
standard to C++17. But I'd say that's OK, that'll force our hand to do
those C++17 related cleanups when the time comes.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Kevin Ottens [Thu, 6 Aug 2020 11:25:23 +0000 (13:25 +0200)]
Switch to Ninja for the clang build
Clang is generally slower to compile than GCC so use a faster Make for
that build variant. This also allows us to verify our CMake files don't
do anything Make specific.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Kevin Ottens [Thu, 6 Aug 2020 06:49:17 +0000 (08:49 +0200)]
Now make sure we're not picking up generated headers
This could happen (and started to happen more with clang-tidy 10) that
clang-tidy picked up errors in headers from the build directory. Now
that we moved the build directory out of source, we can simply filter
headers based on the pwd.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Kevin Ottens [Wed, 5 Aug 2020 22:14:27 +0000 (00:14 +0200)]
Switch to the newer base CI image
We can now spare building QtKeychain over and over shortening a bit the
build. We also update to latest gcc and clang.
Note that I didn't switch the AppImage pipeline to the newer image to
keep the binary compatibility promise required by linuxdeployqt.
Probably would make sense to do a specific image for AppImage with some
other of the cleanups I did there (in particular to avoid building
qtkeychain every time).
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Kevin Ottens [Tue, 11 Aug 2020 12:55:51 +0000 (14:55 +0200)]
Keep the E2EE info message around to allow displaying mnemonic
We lost the ability to display the E2EE mnemonic during the GUI
redesign and the info message wasn't displayed again on restart. So now
we display it every time, it still can be dismissed and the button text
is different in such a case to make the intent clearer.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Kevin Ottens [Mon, 3 Aug 2020 15:09:08 +0000 (17:09 +0200)]
Make sure we always have a CLSID when Explorer integration is used
We update properly the CLSID of folders to integrate them with the
Explorer pane when they are added or removed from the GUI. That said,
there might be cases of users adding folders to sync straight from the
GUI. In such a case the CLSID might be missing on config load so now we
assign one on the fly when that happens.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Stephan Beyer [Mon, 6 Jul 2020 21:17:33 +0000 (23:17 +0200)]
Let context menu open wizard if there are no accounts
The context menu offers to open the main dialog and the settings
even if no accounts are configured. In this case, the main dialog
is useless and the settings are probably confusing. Hence, this
commit replaces these actions in the context menu by an action
to open the wizard (which also opens on left click, so this is
the most natural thing to do).
Michael Schuster [Wed, 22 Jul 2020 01:28:06 +0000 (03:28 +0200)]
Update CI for Qt 5.12.9
Also remove the jq package installation from the AppImage build script because
the package is included in the new Docker image (see nextcloud/docker-ci#231).
Signed-off-by: Michael Schuster <michael@schuster.ms>
Michael Schuster [Sun, 19 Jul 2020 05:51:24 +0000 (07:51 +0200)]
Drone: Upload AppImage to GitHub using nextcloud-desktop-bot
Uploading AppImage's to transfer.sh often fail and cause the CI to wait for
the 15 minutes timeout.
This new approach uses a bot user to create releases in a dedicated ci-builds
repository. Each PR (or master) will get a dedicated release with the AppImage
supplied as a release asset. Older assets will be deleted prior uploading the
recent build.
The bot will then (in case of a PR) create a comment in the PR, containing the
download link.
Home of the CI releases: https://github.com/nextcloud-desktop-bot/ci-builds/releases
projects / nextcloud-desktop.git / log