Add overlay for ads1115 ADCs (#1864)

Add support for Fe-Pi audio sound card. (#1867)

Fe-Pi Audio Sound Card is based on NXP SGTL5000 codec.
Mechanical specification of the board is the same the Raspberry Pi Zero.
3.5mm jacks for Headphone/Mic, Line In, and Line Out.

Signed-off-by: Henry Kupis <fe-pi@cox.net>

Merge remote-tracking branch 'stable/linux-4.9.y' into rpi-4.9.y

Linux 4.9.13

xfs: clear delalloc and cache on buffered write failure

commit fa7f138ac4c70dc00519c124cf7cd4862a0a5b0e upstream.

The buffered write failure handling code in
xfs_file_iomap_end_delalloc() has a couple minor problems. First, if
written == 0, start_fsb is not rounded down and it fails to kill off a
delalloc block if the start offset is block unaligned. This results in a
lingering delalloc block and broken delalloc block accounting detected
at unmount time. Fix this by rounding down start_fsb in the unlikely
event that written == 0.

Second, it is possible for a failed overwrite of a delalloc extent to
leave dirty pagecache around over a hole in the file. This is because is
possible to hit ->iomap_end() on write failure before the iomap code has
attempted to allocate pagecache, and thus has no need to clean it up. If
the targeted delalloc extent was successfully written by a previous
write, however, then it does still have dirty pages when ->iomap_end()
punches out the underlying blocks. This ultimately results in writeback
over a hole. To fix this problem, unconditionally punch out the
pagecache from XFS before the associated delalloc range.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl_usb: Fix for URB leaking when doing ifconfig up/down

commit 575ddce0507789bf9830d089557d2199d2f91865 upstream.

In the function rtl_usb_start we pre-allocate a certain number of urbs
for RX path but they will not be freed when calling rtl_usb_stop. This
results in leaking urbs when doing ifconfig up and down. Eventually,
the system has no available urbs.

Signed-off-by: Michael Schenk <michael.schenk@albis-elcon.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix double-free in the failure path of cgwb_bdi_init()

commit 5f478e4ea5c5560b4e40eb136991a09f9389f331 upstream.

When !CONFIG_CGROUP_WRITEBACK, bdi has single bdi_writeback_congested
at bdi->wb_congested.  cgwb_bdi_init() allocates it with kzalloc() and
doesn't do further initialization.  This usually works fine as the
reference count gets bumped to 1 by wb_init() and the put from
wb_exit() releases it.

However, when wb_init() fails, it puts the wb base ref automatically
freeing the wb and the explicit kfree() in cgwb_bdi_init() error path
ends up trying to free the same pointer the second time causing a
double-free.

Fix it by explicitly initilizing the refcnt to 1 and putting the base
ref from cgwb_bdi_destroy().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: a13f35e87140 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback")
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: Linuxize: Restore and fix Intel compiler build

commit ffab9188e444854882dbc291500d576d6bad7b7b upstream.

ACPICA commit b59347d0b8b676cb555fe8da5cad08fcd4eeb0d3

The following commit cleans up compiler specific inclusions:

  Commit: 9fa1cebdbfff3db8953cebca8ee327d75edefc40
  Subject: ACPICA: OSL: Cleanup the inclusion order of the compiler-specific headers

But breaks one thing due to the following old issue:

 Buidling Linux kernel with Intel compiler originally depends on acgcc.h
 not acintel.h.

So after making Intel compiler build working in ACPICA upstream by
correctly using acintel.h, it becomes unable to build Linux kernel using
Intel compiler as there is no acintel.h in the kernel source tree.

This patch releases acintel.h to Linux kernel and fixes its inclusion in
acenv.h.

Fixes: 9fa1cebdbfff (ACPICA: OSL: Cleanup the inclusion order of the compiler-specific headers)
Link: https://github.com/acpica/acpica/commit/b59347d0
Tested-by: Stepan M Mishura <stepan.m.mishura@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_ct_helper: warn when not applying default helper assignment

commit dfe75ff8ca74f54b0fa5a326a1aa9afa485ed802 upstream.

Commit 3bb398d925 ("netfilter: nf_ct_helper: disable automatic helper
assignment") is causing behavior regressions in firewalls, as traffic
handled by conntrack helpers is now by default not passed through even
though it was before due to missing CT targets (which were not necessary
before this commit).

The default had to be switched off due to security reasons [1] [2] and
therefore should stay the way it is, but let's be friendly to firewall
admins and issue a warning the first time we're in situation where packet
would be likely passed through with the old default but we're likely going
to drop it on the floor now.

Rewrite the code a little bit as suggested by Linus, so that we avoid
spaghettiing the code even more -- namely the whole decision making
process regarding helper selection (either automatic or not) is being
separated, so that the whole logic can be simplified and code (condition)
duplication reduced.

[1] https://cansecwest.com/csw12/conntrack-attack.pdf
[2] https://home.regit.org/netfilter-en/secure-use-of-helpers/

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

goldfish: Sanitize the broken interrupt handler

commit 6cf18e6927c0b224f972e3042fb85770d63cb9f8 upstream.

This interrupt handler is broken in several ways:

  - It loops forever when the op code is not decodeable

  - It never returns IRQ_HANDLED because the only way to exit the loop
    returns IRQ_NONE unconditionally.

The whole concept of this is broken. Creating devices in an interrupt
handler is beyond any point of sanity.

Make it at least behave halfways sane so accidental users do not have to
deal with a hard to debug lockup.

Fixes: e809c22b8fb028 ("goldfish: add the goldfish virtual bus")
Reported-by: Gabriel C <nix.or.die@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/platform/goldfish: Prevent unconditional loading

commit 47512cfd0d7a8bd6ab71d01cd89fca19eb2093eb upstream.

The goldfish platform code registers the platform device unconditionally
which causes havoc in several ways if the goldfish_pdev_bus driver is
enabled:

 - Access to the hardcoded physical memory region, which is either not
   available or contains stuff which is completely unrelated.

 - Prevents that the interrupt of the serial port can be requested

 - In case of a spurious interrupt it goes into a infinite loop in the
   interrupt handler of the pdev_bus driver (which needs to be fixed
   seperately).

Add a 'goldfish' command line option to make the registration opt-in when
the platform is compiled in.

I'm seriously grumpy about this engineering trainwreck, which has seven
SOBs from Intel developers for 50 lines of code. And none of them figured
out that this is broken. Impressive fail!

Fixes: ddd70cf93d78 ("goldfish: platform device for x86")
Reported-by: Gabriel C <nix.or.die@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: console: fix uninitialised spinlock

commit 14816b16fa0adac24f82492f18fa62c55acabbbe upstream.

Since commit 4a510969374a ("tty: Make tty_files_lock per-tty") a new
tty_struct spin lock is taken in the tty release path, but the
USB-serial-console hack was never updated hence leaving the lock of its
"fake" tty uninitialised. This was eventually detected by lockdep.

Make sure to initialise the new lock also for the fake tty to address
this regression.

Yes, this code is a mess, but cleaning it up is left for another day.

Fixes: 4a510969374a ("tty: Make tty_files_lock per-tty")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ark3116: fix register-accessor error handling

commit 9fef37d7cf170522fb354d6d0ea6de09b9b16678 upstream.

The current implementation failed to detect short transfers, something
which could lead to bits of the uninitialised heap transfer buffer
leaking to user space.

Fixes: 149fc791a452 ("USB: ark3116: Setup some basic infrastructure for new ark3116 driver.")
Fixes: f4c1e8d597d1 ("USB: ark3116: Make existing functions 16450-aware and add close and release functions.")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: opticon: fix CTS retrieval at open

commit 2eee05020a0e7ee7c04422cbacdb07859e45dce6 upstream.

The opticon driver used a control request at open to trigger a CTS
status notification to be sent over the bulk-in pipe. When the driver
was converted to using the generic read implementation, an inverted test
prevented this request from being sent, something which could lead to
TIOCMGET reporting an incorrect CTS state.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 7a6ee2b02751 ("USB: opticon: switch to generic read implementation")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: spcp8x5: fix modem-status handling

commit 5ed8d41023751bdd3546f2fe4118304357efe8d2 upstream.

Make sure to detect short control transfers and return zero on success
when retrieving the modem status.

This fixes the TIOCMGET implementation which since e1ed212d8593 ("USB:
spcp8x5: add proper modem-status support") has returned TIOCM_LE on
successful retrieval, and avoids leaking bits from the stack on short
transfers.

This also fixes the carrier-detect implementation which since the above
mentioned commit unconditionally has returned true.

Fixes: e1ed212d8593 ("USB: spcp8x5: add proper modem-status support")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: fix line-status over-reporting

commit a6bb1e17a39818b01b55d8e6238b4b5f06d55038 upstream.

FTDI devices use a receive latency timer to periodically empty the
receive buffer and report modem and line status (also when the buffer is
empty).

When a break or error condition is detected the corresponding status
flags will be set on a packet with nonzero data payload and the flags
are not updated until the break is over or further characters are
received.

In order to avoid over-reporting break and error conditions, these flags
must therefore only be processed for packets with payload.

This specifically fixes the case where after an overrun, the error
condition is continuously reported and NULL-characters inserted until
further data is received.

Reported-by: Michael Walle <michael@walle.cc>
Fixes: 72fda3ca6fc1 ("USB: serial: ftd_sio: implement sysrq handling on
break")
Fixes: 166ceb690750 ("USB: ftdi_sio: clean up line-status handling")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: fix extreme low-latency setting

commit c6dce2626606ef16434802989466636bc28c1419 upstream.

Since commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY
flag") the FTDI driver has been using a receive latency-timer value of
1 ms instead of the device default of 16 ms.

The latency timer is used to periodically empty a non-full receive
buffer, but a status header is always sent when the timer expires
including when the buffer is empty. This means that a two-byte bulk
message is received every millisecond also for an otherwise idle port as
long as it is open.

Let's restore the pre-2009 behaviour which reduces the rate of the
status messages to 1/16th (e.g. interrupt frequency drops from 1 kHz to
62.5 Hz) by not setting ASYNC_LOW_LATENCY by default.

Anyone willing to pay the price for the minimum-latency behaviour should
set the flag explicitly instead using the TIOCSSERIAL ioctl or a tool
such as setserial (e.g. setserial /dev/ttyUSB0 low_latency).

Note that since commit 0cbd81a9f6ba ("USB: ftdi_sio: remove
tty->low_latency") the ASYNC_LOW_LATENCY flag has no other effects but
to set a minimal latency timer.

Reported-by: Antoine Aubert <a.aubert@overkiz.com>
Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: fix modem-status error handling

commit 427c3a95e3e29e65f59d99aaf320d7506f3eed57 upstream.

Make sure to detect short responses when fetching the modem status in
order to avoid parsing uninitialised buffer data and having bits of it
leak to user space.

Note that we still allow for short 1-byte responses.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add new IDs for GE Bx50v3 boards

commit 9a593656def0dc2f6c227851e8e602077267a5f1 upstream.

Add new USB IDs for cp2104/5 devices on Bx50v3 boards due to the design
change.

Signed-off-by: Ken Lin <yungching0725@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mos7840: fix another NULL-deref at open

commit 5182c2cf2a9bfb7f066ef0bdd2bb6330b94dd74e upstream.

Fix another NULL-pointer dereference at open should a malicious device
lack an interrupt-in endpoint.

Note that the driver has a broken check for an interrupt-in endpoint
which means that an interrupt URB has never even been submitted.

Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: msm: Fix module autoload

commit abe81f3b8ed2996e1712d26d38ff6b73f582c616 upstream.

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/tty/serial/msm_serial.ko | grep alias
$

After this patch:

$ modinfo drivers/tty/serial/msm_serial.ko | grep alias
alias:          of:N*T*Cqcom,msm-uartdmC*
alias:          of:N*T*Cqcom,msm-uartdm
alias:          of:N*T*Cqcom,msm-uartC*
alias:          of:N*T*Cqcom,msm-uart

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: socket: fix recvmmsg not returning error from sock_error

[ Upstream commit e623a9e9dec29ae811d11f83d0074ba254aba374 ]

Commit 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path"),
changed the exit path of recvmmsg to always return the datagrams
variable and modified the error paths to set the variable to the error
code returned by recvmsg if necessary.

However in the case sock_error returned an error, the error code was
then ignored, and recvmmsg returned 0.

Change the error path of recvmmsg to correctly return the error code
of sock_error.

The bug was triggered by using recvmmsg on a CAN interface which was
not up. Linux 4.6 and later return 0 in this case while earlier
releases returned -ENETDOWN.

Fixes: 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path")
Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip: fix IP_CHECKSUM handling

[ Upstream commit ca4ef4574f1ee5252e2cd365f8f5d5bafd048f32 ]

The skbs processed by ip_cmsg_recv() are not guaranteed to
be linear e.g. when sending UDP packets over loopback with
MSGMORE.
Using csum_partial() on [potentially] the whole skb len
is dangerous; instead be on the safe side and use skb_checksum().

Thanks to syzkaller team to detect the issue and provide the
reproducer.

v1 -> v2:
 - move the variable declaration in a tighter scope

Fixes: ad6f939ab193 ("ip: Add offset parameter to ip_cmsg_recv")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ptr_ring: fix race conditions when resizing

[ Upstream commit e71695307114335be1ed912f4a347396c2ed0e69 ]

Resizing currently drops consumer lock.  This can cause entries to be
reordered, which isn't good in itself.  More importantly, consumer can
detect a false ring empty condition and block forever.

Further, nesting of consumer within producer lock is problematic for
tun, since it produces entries in a BH, which causes a lock order
reversal:

       CPU0                    CPU1
       ----                    ----
  consume:
  lock(&(&r->consumer_lock)->rlock);
                               resize:
                               local_irq_disable();
                               lock(&(&r->producer_lock)->rlock);
                               lock(&(&r->consumer_lock)->rlock);
  <Interrupt>
  produce:
  lock(&(&r->producer_lock)->rlock);

To fix, nest producer lock within consumer lock during resize,
and keep consumer lock during the whole swap operation.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irda: Fix lockdep annotations in hashbin_delete().

[ Upstream commit 4c03b862b12f980456f9de92db6d508a4999b788 ]

A nested lock depth was added to the hasbin_delete() code but it
doesn't actually work some well and results in tons of lockdep splats.

Fix the code instead to properly drop the lock around the operation
and just keep peeking the head of the hashbin queue.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vxlan: fix oops in dev_fill_metadata_dst

[ Upstream commit 22f0708a718daea5e79de2d29b4829de016a4ff4 ]

Since the commit 0c1d70af924b ("net: use dst_cache for vxlan device")
vxlan_fill_metadata_dst() calls vxlan_get_route() passing a NULL
dst_cache pointer, so the latter should explicitly check for
valid dst_cache ptr. Unfortunately the commit d71785ffc7e7 ("net: add
dst_cache to ovs vxlan lwtunnel") removed said check.

As a result is possible to trigger a null pointer access calling
vxlan_fill_metadata_dst(), e.g. with:

ovs-vsctl add-br ovs-br0
ovs-vsctl add-port ovs-br0 vxlan0 -- set interface vxlan0 \
type=vxlan options:remote_ip=192.168.1.1 \
options:key=1234 options:dst_port=4789 ofport_request=10
ip address add dev ovs-br0 172.16.1.2/24
ovs-vsctl set Bridge ovs-br0 ipfix=@i -- --id=@i create IPFIX \
targets=\"172.16.1.1:1234\" sampling=1
iperf -c 172.16.1.1 -u -l 1000 -b 10M -t 1 -p 1234

This commit addresses the issue passing to vxlan_get_route() the
dst_cache already available into the lwt info processed by
vxlan_fill_metadata_dst().

Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: fix freeing skb too early for IPV6_RECVPKTINFO

[ Upstream commit 5edabca9d4cff7f1f2b68f0bac55ef99d9798ba4 ]

In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet
is forcibly freed via __kfree_skb in dccp_rcv_state_process if
dccp_v6_conn_request successfully returns.

However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb
is saved to ireq->pktopts and the ref count for skb is incremented in
dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed
in dccp_rcv_state_process.

Fix by calling consume_skb instead of doing goto discard and therefore
calling __kfree_skb.

Similar fixes for TCP:

fb7e2399ec17f1004c0e0ccfd17439f8759ede01 [TCP]: skb is unexpectedly freed.
0aea76d35c9651d55bbaf746e7914e5f9ae5a25d tcp: SYN packets are now
simply consumed

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notification

[ Upstream commit 7627ae6030f56a9a91a5b3867b21f35d79c16e64 ]

When setting a neigh related sysctl parameter, we always send a
NETEVENT_DELAY_PROBE_TIME_UPDATE netevent. For instance, when
executing

sysctl net.ipv6.neigh.wlp3s0.retrans_time_ms=2000

a NETEVENT_DELAY_PROBE_TIME_UPDATE netevent is generated.

This is caused by commit 2a4501ae18b5 ("neigh: Send a
notification when DELAY_PROBE_TIME changes"). According to the
commit's description, it was intended to generate such an event
when setting the "delay_first_probe_time" sysctl parameter.

In order to fix this, only generate this event when actually
setting the "delay_first_probe_time" sysctl parameter. This fix
should not have any unintended side-effects, because all but one
registered netevent callbacks check for other netevent event
types (the registered callbacks were obtained by grepping for
"register_netevent_notifier"). The only callback that uses the
NETEVENT_DELAY_PROBE_TIME_UPDATE event is
mlxsw_sp_router_netevent_event() (in
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c): in case
of this event, it only accesses the DELAY_PROBE_TIME of the
passed neigh_parms.

Fixes: 2a4501ae18b5 ("neigh: Send a notification when DELAY_PROBE_TIME changes")
Signed-off-by: Marcus Huewe <suse-tux@gmx.de>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: Do not call fanout_release from atomic contexts

[ Upstream commit 2bd624b4611ffee36422782d16e1c944d1351e98 ]

Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a
netdev"), unfortunately, introduced the following issues.

1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside
rcu_read-side critical section. rcu_read_lock disables preemption, most often,
which prohibits calling sleeping functions.

[  ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section!
[  ]
[  ] rcu_scheduler_active = 1, debug_locks = 0
[  ] 4 locks held by ovs-vswitchd/1969:
[  ]  #0:  (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40
[  ]  #1:  (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch]
[  ]  #2:  (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20
[  ]  #3:  (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0
[  ]
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110
[  ]  [<ffffffff810a2da7>] ___might_sleep+0x57/0x210
[  ]  [<ffffffff810a2fd0>] __might_sleep+0x70/0x90
[  ]  [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0
[  ]  [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30
[  ]  [<ffffffff81186e88>] ? printk+0x4d/0x4f
[  ]  [<ffffffff816106dd>] fanout_release+0x1d/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock).
"sleeping function called from invalid context"

[  ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[  ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd
[  ] INFO: lockdep is turned off.
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff810a2f52>] ___might_sleep+0x202/0x210
[  ]  [<ffffffff810a2fd0>] __might_sleep+0x70/0x90
[  ]  [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0
[  ]  [<ffffffff816106dd>] fanout_release+0x1d/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

3. calling dev_remove_pack(&fanout->prot_hook), from inside
spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack()
-> synchronize_net(), which might sleep.

[  ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002
[  ] INFO: lockdep is turned off.
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff81186274>] __schedule_bug+0x64/0x73
[  ]  [<ffffffff8162b8cb>] __schedule+0x6b/0xd10
[  ]  [<ffffffff8162c5db>] schedule+0x6b/0x80
[  ]  [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410
[  ]  [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810
[  ]  [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10
[  ]  [<ffffffff8154eab5>] synchronize_net+0x35/0x50
[  ]  [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20
[  ]  [<ffffffff8161077e>] fanout_release+0xbe/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

4. fanout_release() races with calls from different CPU.

To fix the above problems, remove the call to fanout_release() under
rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and
netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order
to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to
__fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure
fanout->prot_hook is removed as well.

Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: fix races in fanout_add()

[ Upstream commit d199fab63c11998a602205f7ee7ff7c05c97164b ]

Multiple threads can call fanout_add() at the same time.

We need to grab fanout_mutex earlier to avoid races that could
lead to one thread freeing po->rollover that was set by another thread.

Do the same in fanout_release(), for peace of mind, and to help us
finding lockdep issues earlier.

Fixes: dc99f600698d ("packet: Add fanout support.")
Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: ti: cpsw: fix cpsw assignment in resume

[ Upstream commit a60ced990e309666915d21445e95347d12406694 ]

There is a copy-paste error, which hides breaking of resume
for CPSW driver: there was replaced netdev_priv() to ndev_to_cpsw(ndev)
in suspend, but left it unchanged in resume.

Fixes: 606f39939595a4d4540406bfc11f265b2036af6d
(ti: cpsw: move platform data and slaves info to cpsw_common)

Reported-by: Alexey Starikovskiy <AStarikovskiy@topcon.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/llc: avoid BUG_ON() in skb_orphan()

[ Upstream commit 8b74d439e1697110c5e5c600643e823eb1dd0762 ]

It seems nobody used LLC since linux-3.12.

Fortunately fuzzers like syzkaller still know how to run this code,
otherwise it would be no fun.

Setting skb->sk without skb->destructor leads to all kinds of
bugs, we now prefer to be very strict about it.

Ideally here we would use skb_set_owner() but this helper does not exist yet,
only CAN seems to have a private helper for that.

Fixes: 376c7311bdb6 ("net: add a temporary sanity check in skb_orphan()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Disable preemption when doing TC statistics upcall

[ Upstream commit fed06ee89b78d3af32e235e0e89ad0d946fcb95d ]

When called by HW offloading drivers, the TC action (e.g
net/sched/act_mirred.c) code uses this_cpu logic, e.g

 _bstats_cpu_update(this_cpu_ptr(a->cpu_bstats), bytes, packets)

per the kernel documention, preemption should be disabled, add that.

Before the fix, when running with CONFIG_PREEMPT set, we get a

BUG: using smp_processor_id() in preemptible [00000000] code: tc/3793

asserion from the TC action (mirred) stats_update callback.

Fixes: aad7e08d39bd ('net/mlx5e: Hardware offloaded flower filter statistics support')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kcm: fix a null pointer dereference in kcm_sendmsg()

[ Upstream commit cd27b96bc13841ee7af25837a6ae86fee87273d6 ]

In commit 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()")
I tried to avoid skb allocation for 0-length case, but missed
a check for NULL pointer in the non EOR case.

Fixes: 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kcm: fix 0-length case for kcm_sendmsg()

[ Upstream commit 98e3862ca2b1ae595a13805dcab4c3a6d7718f4d ]

Dmitry reported a kernel warning:

 WARNING: CPU: 3 PID: 2936 at net/kcm/kcmsock.c:627
 kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627
 CPU: 3 PID: 2936 Comm: a.out Not tainted 4.10.0-rc6+ #209
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 Call Trace:
  __dump_stack lib/dump_stack.c:15 [inline]
  dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
  panic+0x1fb/0x412 kernel/panic.c:179
  __warn+0x1c4/0x1e0 kernel/panic.c:539
  warn_slowpath_null+0x2c/0x40 kernel/panic.c:582
  kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627
  kcm_sendmsg+0x163a/0x2200 net/kcm/kcmsock.c:1029
  sock_sendmsg_nosec net/socket.c:635 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:645
  sock_write_iter+0x326/0x600 net/socket.c:848
  new_sync_write fs/read_write.c:499 [inline]
  __vfs_write+0x483/0x740 fs/read_write.c:512
  vfs_write+0x187/0x530 fs/read_write.c:560
  SYSC_write fs/read_write.c:607 [inline]
  SyS_write+0xfb/0x230 fs/read_write.c:599
  entry_SYSCALL_64_fastpath+0x1f/0xc2

when calling syscall(__NR_write, sock2, 0x208aaf27ul, 0x0ul) on a KCM
seqpacket socket. It appears that kcm_sendmsg() does not handle len==0
case correctly, which causes an empty skb is allocated and queued.
Fix this by skipping the skb allocation for len==0 case.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SQUASH: Add LOCO-V2 overlay from last commit

sound: Support for Dion Audio LOCO-V2 DAC-AMP HAT

Signed-off-by: Miquel Blauw <info@dionaudio.nl>

config: add slcan kernel module

See: https://github.com/raspberrypi/linux/issues/1819

Add ads1015 driver to config

Merge remote-tracking branch 'stable/linux-4.9.y' into rpi-4.9.y

dmaengine: bcm2835: Fix cyclic DMA period splitting

The code responsible for splitting periods into chunks that
can be handled by the DMA controller missed to update total_len,
the number of bytes processed in the current period, when there
are more chunks to follow.

Therefore total_len was stuck at 0 and the code didn't work at all.
This resulted in a wrong control block layout and audio issues because
the cyclic DMA callback wasn't executing on period boundaries.

Fix this by adding the missing total_len update.

Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Tested-by: Clive Messer <clive.messer@digitaldreamtime.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>

Linux 4.9.12

videodev2.h: go back to limited range Y'CbCr for SRGB and, ADOBERGB

commit 35879ee4769099905fa3bda0b21e73d434e2df6a upstream.

This reverts 'commit 7e0739cd9c40 ("[media] videodev2.h: fix
sYCC/AdobeYCC default quantization range").

The problem is that many drivers can convert R'G'B' content (often
from sensors) to Y'CbCr, but they all produce limited range Y'CbCr.

To stay backwards compatible the default quantization range for
sRGB and AdobeRGB Y'CbCr encoding should be limited range, not full
range, even though the corresponding standards specify full range.

Update the V4L2_MAP_QUANTIZATION_DEFAULT define accordingly and
also update the documentation.

Fixes: 7e0739cd9c40 ("[media] videodev2.h: fix sYCC/AdobeYCC default quantization range")
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: Make gc wakeup sane, remove set_task_state()

commit be628be09563f8f6e81929efbd7cf3f45c344416 upstream.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb_transport: Pick an unused queue

commit 8fcd0950c021d7be8493280541332b924b9de962 upstream.

Fix typo causing ntb_transport_create_queue to select the first
queue every time, instead of using the next free queue.

Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: fce8a7bb5 ("PCI-Express Non-Transparent Bridge Support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb: ntb_perf missing dmaengine_unmap_put

commit 9644347c5240d0ee3ba7472ef332aaa4ff4db398 upstream.

In the normal I/O execution path, ntb_perf is missing a call to
dmaengine_unmap_put() after submission. That causes us to leak
unmap objects.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 8a7b6a77 ("ntb: ntb perf tool")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NTB: ntb_transport: fix debugfs_remove_recursive

commit dd62245e73de9138333cb0e7a42c8bc1215c3ce6 upstream.

The call to debugfs_remove_recursive(qp->debugfs_dir) of the sub-level
directory must not be later than
debugfs_remove_recursive(nt_debugfs_dir) of the top-level directory.
Otherwise, the sub-level directory will not exist, and it would be
invalid (panic) to attempt to remove it.  This removes the top-level
directory last, after sub-level directories have been cleaned up.

Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: e26a5843f ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timekeeping: Use deferred printk() in debug code

commit f222449c9dfad7c9bb8cb53e64c5c407b172ebbc upstream.

We cannot do printk() from tk_debug_account_sleep_time(), because
tk_debug_account_sleep_time() is called under tk_core seq lock.
The reason why printk() is unsafe there is that console_sem may
invoke scheduler (up()->wake_up_process()->activate_task()), which,
in turn, can return back to timekeeping code, for instance, via
get_time()->ktime_get(), deadlocking the system on tk_core seq lock.

[   48.950592] ======================================================
[   48.950622] [ INFO: possible circular locking dependency detected ]
[   48.950622] 4.10.0-rc7-next-20170213+ #101 Not tainted
[   48.950622] -------------------------------------------------------
[   48.950622] kworker/0:0/3 is trying to acquire lock:
[   48.950653]  (tk_core){----..}, at: [<c01cc624>] retrigger_next_event+0x4c/0x90
[   48.950683]
               but task is already holding lock:
[   48.950683]  (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90
[   48.950714]
               which lock already depends on the new lock.

[   48.950714]
               the existing dependency chain (in reverse order) is:
[   48.950714]
               -> #5 (hrtimer_bases.lock){-.-...}:
[   48.950744]        _raw_spin_lock_irqsave+0x50/0x64
[   48.950775]        lock_hrtimer_base+0x28/0x58
[   48.950775]        hrtimer_start_range_ns+0x20/0x5c8
[   48.950775]        __enqueue_rt_entity+0x320/0x360
[   48.950805]        enqueue_rt_entity+0x2c/0x44
[   48.950805]        enqueue_task_rt+0x24/0x94
[   48.950836]        ttwu_do_activate+0x54/0xc0
[   48.950836]        try_to_wake_up+0x248/0x5c8
[   48.950836]        __setup_irq+0x420/0x5f0
[   48.950836]        request_threaded_irq+0xdc/0x184
[   48.950866]        devm_request_threaded_irq+0x58/0xa4
[   48.950866]        omap_i2c_probe+0x530/0x6a0
[   48.950897]        platform_drv_probe+0x50/0xb0
[   48.950897]        driver_probe_device+0x1f8/0x2cc
[   48.950897]        __driver_attach+0xc0/0xc4
[   48.950927]        bus_for_each_dev+0x6c/0xa0
[   48.950927]        bus_add_driver+0x100/0x210
[   48.950927]        driver_register+0x78/0xf4
[   48.950958]        do_one_initcall+0x3c/0x16c
[   48.950958]        kernel_init_freeable+0x20c/0x2d8
[   48.950958]        kernel_init+0x8/0x110
[   48.950988]        ret_from_fork+0x14/0x24
[   48.950988]
               -> #4 (&rt_b->rt_runtime_lock){-.-...}:
[   48.951019]        _raw_spin_lock+0x40/0x50
[   48.951019]        rq_offline_rt+0x9c/0x2bc
[   48.951019]        set_rq_offline.part.2+0x2c/0x58
[   48.951049]        rq_attach_root+0x134/0x144
[   48.951049]        cpu_attach_domain+0x18c/0x6f4
[   48.951049]        build_sched_domains+0xba4/0xd80
[   48.951080]        sched_init_smp+0x68/0x10c
[   48.951080]        kernel_init_freeable+0x160/0x2d8
[   48.951080]        kernel_init+0x8/0x110
[   48.951080]        ret_from_fork+0x14/0x24
[   48.951110]
               -> #3 (&rq->lock){-.-.-.}:
[   48.951110]        _raw_spin_lock+0x40/0x50
[   48.951141]        task_fork_fair+0x30/0x124
[   48.951141]        sched_fork+0x194/0x2e0
[   48.951141]        copy_process.part.5+0x448/0x1a20
[   48.951171]        _do_fork+0x98/0x7e8
[   48.951171]        kernel_thread+0x2c/0x34
[   48.951171]        rest_init+0x1c/0x18c
[   48.951202]        start_kernel+0x35c/0x3d4
[   48.951202]        0x8000807c
[   48.951202]
               -> #2 (&p->pi_lock){-.-.-.}:
[   48.951232]        _raw_spin_lock_irqsave+0x50/0x64
[   48.951232]        try_to_wake_up+0x30/0x5c8
[   48.951232]        up+0x4c/0x60
[   48.951263]        __up_console_sem+0x2c/0x58
[   48.951263]        console_unlock+0x3b4/0x650
[   48.951263]        vprintk_emit+0x270/0x474
[   48.951293]        vprintk_default+0x20/0x28
[   48.951293]        printk+0x20/0x30
[   48.951324]        kauditd_hold_skb+0x94/0xb8
[   48.951324]        kauditd_thread+0x1a4/0x56c
[   48.951324]        kthread+0x104/0x148
[   48.951354]        ret_from_fork+0x14/0x24
[   48.951354]
               -> #1 ((console_sem).lock){-.....}:
[   48.951385]        _raw_spin_lock_irqsave+0x50/0x64
[   48.951385]        down_trylock+0xc/0x2c
[   48.951385]        __down_trylock_console_sem+0x24/0x80
[   48.951385]        console_trylock+0x10/0x8c
[   48.951416]        vprintk_emit+0x264/0x474
[   48.951416]        vprintk_default+0x20/0x28
[   48.951416]        printk+0x20/0x30
[   48.951446]        tk_debug_account_sleep_time+0x5c/0x70
[   48.951446]        __timekeeping_inject_sleeptime.constprop.3+0x170/0x1a0
[   48.951446]        timekeeping_resume+0x218/0x23c
[   48.951477]        syscore_resume+0x94/0x42c
[   48.951477]        suspend_enter+0x554/0x9b4
[   48.951477]        suspend_devices_and_enter+0xd8/0x4b4
[   48.951507]        enter_state+0x934/0xbd4
[   48.951507]        pm_suspend+0x14/0x70
[   48.951507]        state_store+0x68/0xc8
[   48.951538]        kernfs_fop_write+0xf4/0x1f8
[   48.951538]        __vfs_write+0x1c/0x114
[   48.951538]        vfs_write+0xa0/0x168
[   48.951568]        SyS_write+0x3c/0x90
[   48.951568]        __sys_trace_return+0x0/0x10
[   48.951568]
               -> #0 (tk_core){----..}:
[   48.951599]        lock_acquire+0xe0/0x294
[   48.951599]        ktime_get_update_offsets_now+0x5c/0x1d4
[   48.951629]        retrigger_next_event+0x4c/0x90
[   48.951629]        on_each_cpu+0x40/0x7c
[   48.951629]        clock_was_set_work+0x14/0x20
[   48.951660]        process_one_work+0x2b4/0x808
[   48.951660]        worker_thread+0x3c/0x550
[   48.951660]        kthread+0x104/0x148
[   48.951690]        ret_from_fork+0x14/0x24
[   48.951690]
               other info that might help us debug this:

[   48.951690] Chain exists of:
                 tk_core --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock

[   48.951721]  Possible unsafe locking scenario:

[   48.951721]        CPU0                    CPU1
[   48.951721]        ----                    ----
[   48.951721]   lock(hrtimer_bases.lock);
[   48.951751]                                lock(&rt_b->rt_runtime_lock);
[   48.951751]                                lock(hrtimer_bases.lock);
[   48.951751]   lock(tk_core);
[   48.951782]
                *** DEADLOCK ***

[   48.951782] 3 locks held by kworker/0:0/3:
[   48.951782]  #0:  ("events"){.+.+.+}, at: [<c0156590>] process_one_work+0x1f8/0x808
[   48.951812]  #1:  (hrtimer_work){+.+...}, at: [<c0156590>] process_one_work+0x1f8/0x808
[   48.951843]  #2:  (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90
[   48.951843]   stack backtrace:
[   48.951873] CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.10.0-rc7-next-20170213+
[   48.951904] Workqueue: events clock_was_set_work
[   48.951904] [<c0110208>] (unwind_backtrace) from [<c010c224>] (show_stack+0x10/0x14)
[   48.951934] [<c010c224>] (show_stack) from [<c04ca6c0>] (dump_stack+0xac/0xe0)
[   48.951934] [<c04ca6c0>] (dump_stack) from [<c019b5cc>] (print_circular_bug+0x1d0/0x308)
[   48.951965] [<c019b5cc>] (print_circular_bug) from [<c019d2a8>] (validate_chain+0xf50/0x1324)
[   48.951965] [<c019d2a8>] (validate_chain) from [<c019ec18>] (__lock_acquire+0x468/0x7e8)
[   48.951995] [<c019ec18>] (__lock_acquire) from [<c019f634>] (lock_acquire+0xe0/0x294)
[   48.951995] [<c019f634>] (lock_acquire) from [<c01d0ea0>] (ktime_get_update_offsets_now+0x5c/0x1d4)
[   48.952026] [<c01d0ea0>] (ktime_get_update_offsets_now) from [<c01cc624>] (retrigger_next_event+0x4c/0x90)
[   48.952026] [<c01cc624>] (retrigger_next_event) from [<c01e4e24>] (on_each_cpu+0x40/0x7c)
[   48.952056] [<c01e4e24>] (on_each_cpu) from [<c01cafc4>] (clock_was_set_work+0x14/0x20)
[   48.952056] [<c01cafc4>] (clock_was_set_work) from [<c015664c>] (process_one_work+0x2b4/0x808)
[   48.952087] [<c015664c>] (process_one_work) from [<c0157774>] (worker_thread+0x3c/0x550)
[   48.952087] [<c0157774>] (worker_thread) from [<c015d644>] (kthread+0x104/0x148)
[   48.952087] [<c015d644>] (kthread) from [<c0107830>] (ret_from_fork+0x14/0x24)

Replace printk() with printk_deferred(), which does not call into
the scheduler.

Fixes: 0bf43f15db85 ("timekeeping: Prints the amounts of time spent during suspend")
Reported-and-tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170215044332.30449-1-sergey.senozhatsky@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: use rcuidle console tracepoint

commit fc98c3c8c9dcafd67adcce69e6ce3191d5306c9c upstream.

Use rcuidle console tracepoint because, apparently, it may be issued
from an idle CPU:

  hw-breakpoint: Failed to enable monitor mode on CPU 0.
  hw-breakpoint: CPU 0 failed to disable vector catch

  ===============================
  [ ERR: suspicious RCU usage.  ]
  4.10.0-rc8-next-20170215+ #119 Not tainted
  -------------------------------
  ./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage!

  other info that might help us debug this:

  RCU used illegally from idle CPU!
  rcu_scheduler_active = 2, debug_locks = 0
  RCU used illegally from extended quiescent state!
  2 locks held by swapper/0/0:
   #0:  (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54
   #1:  (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474

  stack backtrace:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119
  Hardware name: Generic OMAP4 (Flattened Device Tree)
    console_unlock
    vprintk_emit
    vprintk_default
    printk
    reset_ctrl_regs
    dbg_cpu_pm_notify
    notifier_call_chain
    cpu_pm_exit
    omap_enter_idle_coupled
    cpuidle_enter_state
    cpuidle_enter_state_coupled
    do_idle
    cpu_startup_entry
    start_kernel

This RCU warning, however, is suppressed by lockdep_off() in printk().
lockdep_off() increments the ->lockdep_recursion counter and thus
disables RCU_LOCKDEP_WARN() and debug_lockdep_rcu_enabled(), which want
lockdep to be enabled "current->lockdep_recursion == 0".

Link: http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <rmk@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/PME: Restore pcie_pme_driver.remove

commit afe3e4d11bdf50a4c3965eb6465ba6bebbcf5dcf upstream.

In addition to making PME non-modular, d7def2040077 ("PCI/PME: Make
explicitly non-modular") removed the pcie_pme_driver .remove() method,
pcie_pme_remove().

pcie_pme_remove() freed the PME IRQ that was requested in pci_pme_probe().
The fact that we don't free the IRQ after d7def2040077 causes the following
crash when removing a PCIe port device via /sys:

  ------------[ cut here ]------------
  kernel BUG at drivers/pci/msi.c:370!
  invalid opcode: 0000 [#1] SMP
  Modules linked in:
  CPU: 1 PID: 14509 Comm: sh Tainted: G    W  4.8.0-rc1-yh-00012-gd29438d
  RIP: 0010:[<ffffffff9758bbf5>]  free_msi_irqs+0x65/0x190
  ...
  Call Trace:
   [<ffffffff9758cda4>] pci_disable_msi+0x34/0x40
   [<ffffffff97583817>] cleanup_service_irqs+0x27/0x30
   [<ffffffff97583e9a>] pcie_port_device_remove+0x2a/0x40
   [<ffffffff97584250>] pcie_portdrv_remove+0x40/0x50
   [<ffffffff97576d7b>] pci_device_remove+0x4b/0xc0
   [<ffffffff9785ebe6>] __device_release_driver+0xb6/0x150
   [<ffffffff9785eca5>] device_release_driver+0x25/0x40
   [<ffffffff975702e4>] pci_stop_bus_device+0x74/0xa0
   [<ffffffff975704ea>] pci_stop_and_remove_bus_device_locked+0x1a/0x30
   [<ffffffff97578810>] remove_store+0x50/0x70
   [<ffffffff9785a378>] dev_attr_store+0x18/0x30
   [<ffffffff97260b64>] sysfs_kf_write+0x44/0x60
   [<ffffffff9725feae>] kernfs_fop_write+0x10e/0x190
   [<ffffffff971e13f8>] __vfs_write+0x28/0x110
   [<ffffffff970b0fa4>] ? percpu_down_read+0x44/0x80
   [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0
   [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0
   [<ffffffff971e1f04>] vfs_write+0xc4/0x180
   [<ffffffff971e3089>] SyS_write+0x49/0xa0
   [<ffffffff97001a46>] do_syscall_64+0xa6/0x1b0
   [<ffffffff9819201e>] entry_SYSCALL64_slow_path+0x25/0x25
  ...
   RIP  [<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190
   RSP <ffff89ad3085bc48>
  ---[ end trace f4505e1dac5b95d3 ]---
  Segmentation fault

Restore pcie_pme_remove().

[bhelgaas: changelog]
Fixes: d7def2040077 ("PCI/PME: Make explicitly non-modular")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "i2c: designware: detect when dynamic tar update is possible"

commit 12688dc21f71f4dcc9e2b8b5556b0c6cc8df1491 upstream.

This reverts commit 63d0f0a6952a1a02bc4f116b7da7c7887e46efa3.

It caused a regression on platforms where I2C controller is synthesized
with dynamic TAR update disabled. Detection code is testing is bit
DW_IC_CON_10BITADDR_MASTER in register DW_IC_CON read-only but fails to
restore original value in case bit is read-write.

Instead of fixing this we revert the commit since it was preparation for
the commit 0317e6c0f1dc ("i2c: designware: do not disable adapter after
transfer") which was also reverted.

Reported-by: Shah Nehal-Bakulchandra <Nehal-bakulchandra.Shah@amd.com>
Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-By: Lucas De Marchi <lucas.demarchi@intel.com>
Fixes: 63d0f0a6952a ("i2c: designware: detect when dynamic tar update is possible")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()

commit 9e3440481845b2ec22508f60837ee2cab2b6054f upstream.

The 64-bit get_user() wasn't clearing the high word due to a typo in the
error handler. The exception handler entry was already correct, though.
Noticed during recent usercopy test additions in lib/test_user_copy.c.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: Move futex_init() to core_initcall

commit 25f71d1c3e98ef0e52371746220d66458eac75bc upstream.

The UEVENT user mode helper is enabled before the initcalls are executed
and is available when the root filesystem has been mounted.

The user mode helper is triggered by device init calls and the executable
might use the futex syscall.

futex_init() is marked __initcall which maps to device_initcall, but there
is no guarantee that futex_init() is invoked _before_ the first device init
call which triggers the UEVENT user mode helper.

If the user mode helper uses the futex syscall before futex_init() then the
syscall crashes with a NULL pointer dereference because the futex subsystem
has not been initialized yet.

Move futex_init() to core_initcall so futexes are initialized before the
root filesystem is mounted and the usermode helper becomes available.

[ tglx: Rewrote changelog ]

Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: jiang.biao2@zte.com.cn
Cc: jiang.zhengxiong@zte.com.cn
Cc: zhong.weidong@zte.com.cn
Cc: deng.huali@zte.com.cn
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1483085875-6130-1-git-send-email-yang.yang29@zte.com.cn
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp/mst: fix kernel oops when turning off secondary monitor

commit bb08c04dc867b5f392caec635c097d5d5fcd8c9f upstream.

100% reproducible issue found on SKL SkullCanyon NUC with two external
DP daisy-chained monitors in DP/MST mode. When turning off or changing
the input of the second monitor the machine stops with a kernel
oops. This issue happened with 4.8.8 as well as drm/drm-intel-nightly.

This issue is traced to an inconsistent control flow in
drm_dp_update_payload_part1(): the 'port' pointer is set to NULL at the
same time as 'req_payload.num_slots' is set to zero, but the pointer is
dereferenced even when req_payload.num_slot is zero.

The problematic dereference was introduced in commit dfda0df34
("drm/mst: rework payload table allocation to conform better") and may
impact all versions since v3.18

The fix suggested by Chris Wilson removes the kernel oops and was found to
work well after 10mn of monkey-testing with the second monitor power and
input buttons

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98990
Fixes: dfda0df34264 ("drm/mst: rework payload table allocation to conform better.")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Tested-by: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487076561-2169-1-git-send-email-jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor

commit d74c67dd7800fc7aae381f272875c337f268806c upstream.

The crtc_h/vdisplay fields may not match the CRTC viewport dimensions
with special modes such as interlaced ones.

Fixes the HW cursor disappearing in the bottom half of the screen with
interlaced modes.

Fixes: 6b16cf7785a4 ("drm/radeon: Hide the HW cursor while it's out of bounds")
Reported-by: Ashutosh Kumar <ashutosh.kumar@amd.com>
Tested-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ELAN0605 to the ACPI table

commit 722c5ac708b4f5c1fcfad5fed4c95234c8b06590 upstream.

ELAN0605 has been confirmed to be a variant of ELAN0600, which is
blacklisted in the hid-core to be managed by elan_i2c. This device can be
found in Lenovo ideapad 310s (80U4000).

Signed-off-by: Hiroka IHARA <ihara_h@live.jp>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix missing sanity check in /dev/sg

commit 137d01df511b3afe1f05499aea05f3bafc0fb221 upstream.

What happens is that a write to /dev/sg is given a request with non-zero
->iovec_count combined with zero ->dxfer_len.  Or with ->dxferp pointing
to an array full of empty iovecs.

Having write permission to /dev/sg shouldn't be equivalent to the
ability to trigger BUG_ON() while holding spinlocks...

Found by Dmitry Vyukov and syzkaller.

[ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the
  underlying issue.  - Linus ]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: don't BUG_ON() empty DMA transfers

commit fd3fc0b4d7305fa7246622dcc0dec69c42443f45 upstream.

Don't crash the machine just because of an empty transfer. Use WARN_ON()
combined with returning an error.

Found by Dmitry Vyukov and syzkaller.

[ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root
  cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON()
  might still be a cause of excessive log spamming.

  NOTE! If this warning ever triggers, we may end up leaking resources,
  since this doesn't bother to try to clean the command up. So this
  WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is
  much worse.

  People really need to stop using BUG_ON() for "this shouldn't ever
  happen". It makes pretty much any bug worse.     - Linus ]

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64: Disable use of radix under a hypervisor

commit 3f91a89d424a79f8082525db5a375e438887bb3e upstream.

Currently, if the kernel is running on a POWER9 processor under a
hypervisor, it may try to use the radix MMU even though it doesn't have
the necessary code to do so (it doesn't negotiate use of radix, and it
doesn't do the H_REGISTER_PROC_TBL hcall).  If the hypervisor supports
both radix and HPT, then it will set up the guest to use HPT (since the
guest doesn't request radix in the CAS call), but if the radix feature
bit is set in the ibm,pa-features property (which is valid, since
ibm,pa-features is defined to represent the capabilities of the
processor) the guest will try to use radix, resulting in a crash when
it turns the MMU on.

This makes the minimal fix for the current code, which is to disable
radix unless we are running in hypervisor mode.

Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: fix multi-bit bus width without high-speed mode

commit 3d4ef329757cfd5e0b23cce97cdeca7e2df89c99 upstream.

Commit 577fb13199b1 ("mmc: rework selection of bus speed mode")
refactored bus width selection code to mmc_select_bus_width().

However, it also altered the behavior to not call the selection code in
non-high-speed modes anymore.

This causes 1-bit mode to always be used when the high-speed mode is not
enabled, even though 4-bit and 8-bit bus are valid bus widths in the
backwards-compatibility (legacy) mode as well (see e.g. 5.3.2 Bus Speed
Modes in JEDEC 84-B50). This results in a significant regression in
transfer speeds.

Fix the code to allow 4-bit and 8-bit widths even without high-speed
mode, as before.

Tested with a Zynq-7000 PicoZed 7020 board.

Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix uninitialized flags in pipe_buffer

commit 84588a93d097bace24b9233930f82511d4f34210 upstream.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: d82718e348fe ("fuse_dev_splice_read(): switch to add_to_pipe()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix use after free issue in fuse_dev_do_read()

commit 6ba4d2722d06960102c981322035239cd66f7316 upstream.

There is a potential race between fuse_dev_do_write()
and request_wait_answer() contexts as shown below:

TASK 1:
__fuse_request_send():
  |--spin_lock(&fiq->waitq.lock);
  |--queue_request();
  |--spin_unlock(&fiq->waitq.lock);
  |--request_wait_answer():
       |--if (test_bit(FR_SENT, &req->flags))
       <gets pre-empted after it is validated true>
                                   TASK 2:
                                   fuse_dev_do_write():
                                     |--clears bit FR_SENT,
                                     |--request_end():
                                        |--sets bit FR_FINISHED
                                        |--spin_lock(&fiq->waitq.lock);
                                        |--list_del_init(&req->intr_entry);
                                        |--spin_unlock(&fiq->waitq.lock);
                                        |--fuse_put_request();
       |--queue_interrupt();
       <request gets queued to interrupts list>
            |--wake_up_locked(&fiq->waitq);
       |--wait_event_freezable();
       <as FR_FINISHED is set, it returns and then
       the caller frees this request>

Now, the next fuse_dev_do_read(), see interrupts list is not empty
and then calls fuse_read_interrupt() which tries to access the request
which is already free'd and gets the below crash:

[11432.401266] Unable to handle kernel paging request at virtual address
6b6b6b6b6b6b6b6b
...
[11432.418518] Kernel BUG at ffffff80083720e0
[11432.456168] PC is at __list_del_entry+0x6c/0xc4
[11432.463573] LR is at fuse_dev_do_read+0x1ac/0x474
...
[11432.679999] [<ffffff80083720e0>] __list_del_entry+0x6c/0xc4
[11432.687794] [<ffffff80082c65e0>] fuse_dev_do_read+0x1ac/0x474
[11432.693180] [<ffffff80082c6b14>] fuse_dev_read+0x6c/0x78
[11432.699082] [<ffffff80081d5638>] __vfs_read+0xc0/0xe8
[11432.704459] [<ffffff80081d5efc>] vfs_read+0x90/0x108
[11432.709406] [<ffffff80081d67f0>] SyS_read+0x58/0x94

As FR_FINISHED bit is set before deleting the intr_entry with input
queue lock in request completion path, do the testing of this flag and
queueing atomically with the same lock in queue_interrupt().

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

siano: make it work again with CONFIG_VMAP_STACK

commit f9c85ee67164b37f9296eab3b754e543e4e96a1c upstream.

Reported as a Kaffeine bug:
https://bugs.kde.org/show_bug.cgi?id=375811

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

On Kernel 4.9, the default is to not accept DMA on stack anymore
on x86 architecture. On other architectures, this has been a
requirement since Kernel 2.2. So, after this patch, this driver
should likely work fine on all archs.

Tested with USB ID 2040:5510: Hauppauge Windham

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfs: fix uninitialized flags in splice_to_pipe()

commit 5a81e6a171cdbd1fa8bc1fdd80c23d3d71816fac upstream.

Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the
unused part of the pipe ring buffer.  Previously splice_to_pipe() left
the flags value alone, which could result in incorrect behavior.

Uninitialized flags appears to have been there from the introduction of
the splice syscall.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk-bcm2835: Add claim-clocks property

The claim-clocks property can be used to prevent PLLs and dividers
from being marked as critical. It contains a vector of clock IDs,
as defined by dt-bindings/clock/bcm2835.h.

Use this mechanism to claim PLLD_DSI0, PLLD_DSI1, PLLH_AUX and
PLLH_PIX for the vc4_kms_v3d driver.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

clk-bcm2835: Mark used PLLs and dividers CRITICAL

The VPU configures and relies on several PLLs and dividers. Mark all
enabled dividers and their PLLs as CRITICAL to prevent the kernel from
switching them off.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

brcmfmac: Mute expected startup 'errors'

The brcmfmac WiFi driver always complains about the '00' country code
and the firmware version is reported as an error. Modify the driver to
ignore '00' silently and display firmware version at INFO level.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

BCM270X_DT: Add SMSC ethernet controller to DT

With an ethernet node in the DT, a suitable firmware can populate the
local-mac-address property, removing the need for a downstream patch
to the driver to read its MAC address from a module parameter.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

drm/vc4: Verify at boot that CMA doesn't cross a 256MB boundary.

I've seen lots of users cranking CMA up higher, so throw an error if
they do.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Fix OOPSes from trying to cache a partially constructed BO.

If a CMA allocation failed, the partially constructed BO would be
unreferenced through the normal path, and we might choose to put it in
the BO cache.  If we then reused it before it expired from the cache,
the kernel would OOPS.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.")

drm/vc4: Fulfill user BO creation requests from the kernel BO cache.

The from_cache flag was actually "the BO is invisible to userspace",
so we can repurpose to just zero out a cached BO and return it to
userspace.

Improves wall time for a loop of 5 glsl-algebraic-add-add-1 by
-1.44989% +/- 0.862891% (n=28, 1 outlier removed from each that
appeared to be other system noise)

Note that there's an intel-gpu-tools test to check for the proper
zeroing behavior here, which we continue to pass.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Fix sending of page flip completion events in FKMS mode.

In the rewrite of vc4_crtc.c for fkms, I dropped the part of the
CRTC's atomic flush handler that moved the completion event from the
proposed atomic state change to the CRTC's current state.  That meant
that when full screen pageflipping happened (glxgears -fullscreen in
X, compton, por weston), the app would end up blocked firever waiting
to draw its next frame.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Add DRM_DEBUG_ATOMIC for the insides of fkms.

Trying to debug weston on fkms involved figuring out what calls I was
making to the firmware.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Name the primary and cursor planes in fkms.

This makes debugging nicer, compared to trying to remember what the
IDs are.

Signed-off-by: Eric Anholt <eric@anholt.net>

BCM270X: Disable VEC unless vc4-kms-v3d is present.

Signed-off-by: Eric Anholt <eric@anholt.net>

ARM: dts: bcm283x: Enable the VEC IP on all RaspberryPi boards

Enable the VEC IP on all RaspberryPi boards.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 5ab1a37c6027c114a87a1ae32cfc5ef303d643c5)

ARM: dts: bcm283x: Add VEC node in bcm283x.dtsi

Add the VEC (Video EnCoder) node definition in bcm283x.dtsi.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit b899c45208d6f204a6da9a1132577993eeecf0fb)

drm/vc4: Add DSI driver

The DSI0 and DSI1 blocks on the 2835 are related hardware blocks.
Some registers move around, and the featureset is slightly different,
as DSI1 (the 4-lane DSI) is a later version of the hardware block.
This driver doesn't yet enable DSI0, since we don't have any hardware
to test against, but it does put a lot of the register definitions and
code in place.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Add support for feeding DSI encoders from the pixel valve.

We have to set a different pixel format, which tells the hardware to
use the pix_width field that's fed in sideband from the DSI encoder to
divide the "pixel" clock.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Set up SCALER_DISPCTRL at boot.

We want the HVS on, obviously, and we also want DSP3 (PV1's source) to
be muxed from HVS channel 2 like we expect in vc4_crtc.c.  The
firmware wasn't setting the DSP3 mux up when both the LCD and HDMI
were disabled.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Add support for the VEC (Video Encoder) IP

The VEC IP is a TV DAC, providing support for PAL and NTSC standards.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit e4b81f8c74c82dbc0cb0e5ceb5ef9b713b325fc9)

drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum

List of values like the DRM_MODE_SUBCONNECTOR_xx ones are better
represented with enums.

Turn the DRM_MODE_SUBCONNECTOR_xx macros into an enum.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit dee7a4fee730ca8908f335b6b66174cba4598ecd)

drm: Add TV connector states to drm_connector_state

Some generic TV connector properties are exposed in drm_mode_config, but
they are currently handled independently in each DRM encoder driver.

Extend the drm_connector_state to store TV related states, and modify the
drm_atomic_connector_{set,get}_property() helpers to fill the connector
state accordingly.

Each driver is then responsible for checking and applying the new config
in its ->atomic_mode_{check,set}() operations.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 299a16b163c95fbe1e3b1e142ba9c6ce9dab2c23)

drm/vc4: Fix ->clock_select setting for the VEC encoder

PV_CONTROL_CLK_SELECT_VEC is actually 2 and not 0. Fix the definition and
rework the vc4_set_crtc_possible_masks() to cover the full range of the
PV_CONTROL_CLK_SELECT field.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit ab8df60e3a3b68420d0d4477c5f07c00fbfb078b)

drm/vc4: Fix race between page flip completion event and clean-up

There was a small window where a userspace program could submit
a pageflip after receiving a pageflip completion event yet still
receive EBUSY.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit 26fc78f6fef39b9d7a15def5e7e9826ff68303f4)

drm/vc4: Add fragment shader threading support

FS threading brings performance improvements of 0-20% in glmark2.

The validation code checks for thread switch signals and ensures that
the registers of the other thread are not touched, and that our clamps
are not live across thread switches.  It also checks that the
threading and branching instructions do not interfere.

(Original patch by Jonas, changes by anholt for style cleanup,
removing validation the kernel doesn't need to do, and adding the flag
for userspace).

v2: Minor style fixes from checkpatch.

Signed-off-by: Jonas Pfeil <pfeiljonas@gmx.de>
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit c778cc5df944291dcdb1ca7a6bb781fbc22550c5)

drm/vc4: Use runtime autosuspend to avoid thrashing V3D power state.

The pm_runtime_put() we were using immediately released power on the
device, which meant that we were generally turning the device off and
on once per frame.  In many profiles I've looked at, that added up to
about 1% of CPU time, but this could get worse in the case of frequent
rendering and readback (as may happen in X rendering).  By keeping the
device on until we've been idle for a couple of frames, we drop the
overhead of runtime PM down to sub-.1%.

Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 3a62234680d86efa0239665ed8a0e908f1aef147)

drm/vc4: Add support for rendering with ETC1 textures.

The validation for it ends up being quite simple, but I hadn't got
around to it before merging the driver.  For backwards compatibility,
we also need to add a flag so that the userspace GL driver can easily
tell if the kernel will allow ETC1 textures (on an old kernel, it will
continue to convert to RGBA8)

Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 7154d76fedf549607afbc0d13db9aaf02da5cebf)

drm/vc4: Fix termination of the initial scan for branch targets.

The loop is scanning until the original max_ip (size of the BO), but
we want to not examine any code after the PROG_END's delay slots.
There was a block trying to do that, except that we had some early
continue statements if the signal wasn't a PROG_END or a BRANCH.

The failure mode would be that a valid shader is rejected because some
undefined memory after the PROG_END slots is parsed as a branch and
the rest of its setup is illegal.  I haven't seen this in the wild,
but valgrind was complaining when about this up in the userland
simulator mode.

Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 457e67a728696c4f8e6423c64e93def50530db9a)

BCM270X: Enable the DSI panel node in the VC4 overlay.

Signed-off-by: Eric Anholt <eric@anholt.net>

ARM: bcm2835: dt: Add the DSI module nodes and clocks.

The modules stay disabled by default, and if you want to enable DSI
you'll need an overlay that connects a panel to it.

Signed-off-by: Eric Anholt <eric@anholt.net>

BCM270X: Add the DSI panel to the defconfig.

Signed-off-by: Eric Anholt <eric@anholt.net>

drm/panel: Add support for the Raspberry Pi 7" Touchscreen.

This driver communicates with the Atmel microcontroller for sequencing
the poweron of the TC358762 DSI-DPI bridge and controlling the
backlight PWM.

The following lines are required in config.txt, to keep the firmware
from trying to bash our I2C lines and steal the DSI interrupts:

    disable_touchscreen=1
    ignore_lcd=2
    mask_gpu_interrupt1=0x1000

This means that the firmware won't power on the panel at boot time (no
rainbow) and the touchscreen input won't work.  The native input
driver for the touchscreen still needs to be written.

v2: Set the same default orientation as the closed source firmware
    used, which is the best for viewing angle.

Signed-off-by: Eric Anholt <eric@anholt.net>

clk: bcm2835: Add leaf clock measurement support, disabled by default

This proved incredibly useful during debugging of the DSI driver, to
see if our clocks were running at rate we requested.  Let's leave it
here for the next person interacting with clocks on the platform (and
so that hopefully we can just hook it up to debugfs some day).

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
(cherry picked from commit 3f9195811d8d829556c4cd88d3f9e56a80d5ba60)

clk: bcm2835: Register the DSI0/DSI1 pixel clocks.

The DSI pixel clocks are muxed from clocks generated in the analog phy
by the DSI driver.  In order to set them as parents, we need to do the
same name lookup dance on them as we do for our root oscillator.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
(cherry picked from commit 8a39e9fa578229fd4604266c6ebb1a3a77d7994c)

clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL dividers.

Our core PLLs are intended to be configured once and left alone.  With
the SET_RATE_PARENT, asking to set the PLLD_DSI1 clock rate would
change PLLD just to get closer to the requested DSI clock, thus
changing PLLD_PER, the UART and ethernet PHY clock rates downstream of
it, and breaking ethernet.

We *do* want PLLH to change so that PLLH_AUX can be exactly the value
we want, though.  Thus, we need to have a per-divider policy of
whether to pass rate changes up.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
(cherry picked from commit 55486091bd1e1c5ed28c43c0d6b3392468a9adb5)

clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate()

best_rate is reported as potentially uninitialized by gcc.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: 155e8b3b0ee3 ("clk: bcm: Support rate change propagation on bcm2835 clocks")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
(cherry picked from commit 2aab7a2055a1705c9e30920d95a596226999eb21)

clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock

The VEC clock requires needs to be set at exactly 108MHz. Allow rate
change propagation on PLLH_AUX to match this requirement wihtout
impacting other IPs (PLLH is currently only used by the HDMI encoder,
which cannot be enabled when the VEC encoder is enabled).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
(cherry picked from commit d86d46af84855403c00018be1c3e7bc190f2a6cd)

clk: bcm: Support rate change propagation on bcm2835 clocks

Some peripheral clocks, like the VEC (Video EnCoder) clock need to be set
to a precise rate (in our case 108MHz). With the current implementation,
where peripheral clocks are not allowed to forward rate change requests
to their parents, it is impossible to match this requirement unless the
bootloader has configured things correctly, or a specific rate has been
assigned through the DT (with the assigned-clk-rates property).

Add a new field to struct bcm2835_clock_data to specify which parent
clocks accept rate change propagation, and support set rate propagation
in bcm2835_clock_determine_rate().

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
(cherry picked from commit 155e8b3b0ee320ae866b97dd31eba8a1f080a772)

clk: bcm2835: Fix ->fixed_divider of pllh_aux

There is no fixed divider on pllh_aux.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
(cherry picked from commit f2a46926aba1f0c33944901d2420a6a887455ddc)