Marek Szyprowski [Thu, 16 Jan 2020 15:25:35 +0000 (16:25 +0100)]
[PATCH 4/5] arm: dts: exynos: Use common alias for Odroid U3/X2 MMC2 (SD-card)
Use MMC0 for eMMC and MMC2 for SD-card as other Exynos-based boards do.
This allows to use common code to get MMC device id based on the XOM[7:5]
pins.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Gbp-Pq: Topic exynos
Gbp-Pq: Name 0006-arm-dts-exynos-Use-common-alias-for-Odroid-U3-X2-MMC.patch
Marek Szyprowski [Thu, 16 Jan 2020 15:25:34 +0000 (16:25 +0100)]
[PATCH 3/5] arm: dts: exynos: Fix card-detect polarity for SD card on Odroid U3/X2
Card detect line for SD-card on Odroid U3/X2 boards are active low, so
add cd-inverted property to indicate this, as u-boot's GPIO driver doesn't
support specifying line polarity. This restores S5P_SDHCI driver operation
on Odroid U3/X2 boards.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Gbp-Pq: Topic exynos
Gbp-Pq: Name 0005-arm-dts-exynos-Fix-card-detect-polarity-for-SD-card-.patch
Marek Szyprowski [Thu, 16 Jan 2020 13:46:04 +0000 (14:46 +0100)]
[PATCH 1/5] arm: exynos: Use proper PMIC device names
Since commit 4213609cc7 ("drivers: core: use strcmp when find device by
name") one has to provide full name to get requested object. Fix the code
used to detect enable power regulators on the supported Exynos boards to
use proper PMIC device device name then.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Gbp-Pq: Topic exynos
Gbp-Pq: Name 0003-arm-exynos-Use-proper-PMIC-device-names.patch
Marek Szyprowski [Tue, 14 Jan 2020 14:04:20 +0000 (15:04 +0100)]
[PATCH] arm: exynos: Use proper ADC device name
Since commit 4213609cc7 ("drivers: core: use strcmp when find device by
name") one has to provide full name to get requested object. Fix the code
used to detect Odroid board revision to use proper ADC device name then.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Gbp-Pq: Topic exynos
Gbp-Pq: Name 0002-arm-exynos-Use-proper-ADC-device-name.patch
Debian's flash-kernel expect the console variable to just contain the device,
because it will set the bootargs to "console=${console}". So revert adding
"console=" to the console parameter, but also adjust the shipped bootscripts
for exynos boards to cope with it.
Bug-Debian: https://bugs.debian.org/920116 Signed-off-by: Benjamin Drung <bdrung@debian.org>
Gbp-Pq: Topic exynos
Gbp-Pq: Name 0001-arm-config-fix-default-console-only-to-specify-the-d.patch
Ensure that CONFIG_SANDBOX is set when running "make env", avoiding a
failure to build caused by config_distro_bootcmd.h following the wrong
codepath...
Gbp-Pq: Name ensure-config-sandbox-for-make-env.patch
u-boot currently fails to build from source on sh4 since the
linker name prefix defined in arch/sh/config.mk is outdated.
On current Debian installations, the binaries of the GNU
toolchain are named using the triplett scheme
$arch-$kernel-$toolchain. Thus, on sh4, the proper name
is "sh4-linux-gnu-ld" instead of "sh4-linux-ld". This
patch updates build configuration on sh4 to reflect that.
projects / u-boot.git / log