From: Phil Elwell Date: Mon, 8 May 2017 15:43:40 +0000 (+0100) Subject: irq_bcm2836: Send event when onlining sleeping cores X-Git-Tag: archive/raspbian/4.9.82-1+deb9u3+rpi1_jessie~5^2~237 X-Git-Url: https://dgit.raspbian.org/?a=commitdiff_plain;h=a3d4f16fed1bcef2e69fdadda03ddfaab2a5461a;p=linux-4.9.git irq_bcm2836: Send event when onlining sleeping cores In order to reduce power consumption and bus traffic, it is sensible for secondary cores to enter a low-power idle state when waiting to be started. The wfe instruction causes a core to wait until an event or interrupt arrives before continuing to the next instruction. The sev instruction sends a wakeup event to the other cores, so call it from bcm2836_smp_boot_secondary, the function that wakes up the waiting cores during booting. It is harmless to use this patch without the corresponding change adding wfe to the ARMv7/ARMv8-32 stubs, but if the stubs are updated and this patch is not applied then the other cores will sleep forever. See: https://github.com/raspberrypi/linux/issues/1989 Signed-off-by: Phil Elwell --- diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c index e10597c1a1e5..6dccdf94f6f3 100644 --- a/drivers/irqchip/irq-bcm2836.c +++ b/drivers/irqchip/irq-bcm2836.c @@ -248,6 +248,9 @@ static int __init bcm2836_smp_boot_secondary(unsigned int cpu, writel(secondary_startup_phys, intc.base + LOCAL_MAILBOX3_SET0 + 16 * cpu); + dsb(sy); /* Ensure write has completed before waking the other CPUs */ + sev(); + return 0; }