From: Raspbian forward porter Date: Thu, 17 Dec 2015 02:12:51 +0000 (+0000) Subject: u-boot (2015.10+dfsg1-4+rpi1) stretch-staging; urgency=medium X-Git-Tag: archive/raspbian/2016.11+dfsg1-3+rpi1~32 X-Git-Url: https://dgit.raspbian.org/?a=commitdiff_plain;h=9719e3a02fbcf2872d2b3724ec2beed6ae775b84;p=u-boot.git u-boot (2015.10+dfsg1-4+rpi1) stretch-staging; urgency=medium [changes brought forward from 2014.10+dfsg1-2+rpi1 by Peter Michael Green at Fri, 28 Nov 2014 06:00:07 +0000] * Don't build versions for various armv7 devices, build rpi version instead. [dgit import unpatched u-boot 2015.10+dfsg1-4+rpi1] --- 9719e3a02fbcf2872d2b3724ec2beed6ae775b84 diff --cc debian/bin/u-boot-install-targets index 000000000,000000000..d5e996eea new file mode 100755 --- /dev/null +++ b/debian/bin/u-boot-install-targets @@@ -1,0 -1,0 +1,10 @@@ ++#!/bin/sh ++target=$1 ++docs="$2" ++subarch_install_file="debian/build/targets.${target}" ++if [ -f "${subarch_install_file}" ]; then ++ cat "${subarch_install_file}" ++fi ++for doc in ${docs} ; do ++ echo ${doc} /usr/share/doc/u-boot-${target}/ ++done diff --cc debian/bin/update-lintian-overrides index 000000000,000000000..b6c17c184 new file mode 100755 --- /dev/null +++ b/debian/bin/update-lintian-overrides @@@ -1,0 -1,0 +1,38 @@@ ++#!/bin/sh ++ ++target_file=debian/targets ++ ++awk '/^[a-z0-9]/{print $2}' ${target_file} | sort -u | while read subarch ; do ++ case ${subarch} in ++ -) package=u-boot ;; ++ *) package=u-boot-${subarch} ;; ++ esac ++ overrides=debian/${package}.lintian-overrides ++ ++ cat >${overrides}<> ${overrides} ++ ++ cat >>${overrides}<> ${overrides} ++ ++ cat >>${overrides}<> debian/${package}.substvars ++done diff --cc debian/changelog index 000000000,000000000..1477e461e new file mode 100644 --- /dev/null +++ b/debian/changelog @@@ -1,0 -1,0 +1,1019 @@@ ++u-boot (2015.10+dfsg1-4+rpi1) stretch-staging; urgency=medium ++ ++ [changes brought forward from 2014.10+dfsg1-2+rpi1 by Peter Michael Green at Fri, 28 Nov 2014 06:00:07 +0000] ++ * Don't build versions for various armv7 devices, build rpi version instead. ++ ++ -- Raspbian forward porter Thu, 17 Dec 2015 02:12:51 +0000 ++ ++u-boot (2015.10+dfsg1-4) unstable; urgency=medium ++ ++ * Fix reproducibility issue with targets listed in package descriptions ++ by always sorting using C locale. ++ * u-boot-imx: Updates to novena patches: ++ - Sync with submitted patch for distro_bootcmd support. ++ - Add upstream patch to fix USB support. ++ - Add upstream patch to enable loading u-boot.img from EXT ++ filesystems. ++ * Add upstream patches to fix mkimage support for multi and script ++ images (Closes: #805434). ++ ++ -- Vagrant Cascadian Tue, 08 Dec 2015 08:59:47 -0800 ++ ++u-boot (2015.10+dfsg1-3) unstable; urgency=medium ++ ++ * u-boot-install-targets: Add support to install documentation. ++ * u-boot-exynos: Install README.odroid. ++ * u-boot-rockchip: Install README.rockchip. ++ * u-boot-omap: Install README.nokia_rx51. ++ * Add included platforms to u-boot package descriptions. ++ * u-boot-sunxi: Enable the A10s-OLinuXino-M target. Thanks to Benedikt ++ Wildenhain (Closes: #806151). ++ * u-boot-imx: Add novena patches to include fdtfile variable, and load ++ fdt file into correct address. ++ * u-boot-sunxi: Backport patches from upstream to enable the Lamobo_R1 ++ target. ++ ++ -- Vagrant Cascadian Tue, 24 Nov 2015 14:14:29 -0800 ++ ++u-boot (2015.10+dfsg1-2) unstable; urgency=medium ++ ++ * Add missing content to u-boot-rockchip package. ++ * Update wandboard and mx6cuboxi patches to use config_distro_bootcmd ++ patches from u-boot-imx. ++ * Patch mx6cuboxi to specify the baudrate in the console setting. ++ * Update BeagleBone Black patches to use config_distro_bootcmd from ++ upstream. ++ * Patch to switch novena to use distro_bootcmd. ++ ++ -- Vagrant Cascadian Sat, 14 Nov 2015 09:22:47 -0600 ++ ++u-boot (2015.10+dfsg1-2~exp1) experimental; urgency=medium ++ ++ * Build rockchip package, with firefly-rk3288 as the initial ++ target. Thanks to Emilio Pozuelo Monfort and Sjoerd Simons. ++ (Closes: #803166). ++ ++ -- Vagrant Cascadian Mon, 02 Nov 2015 07:59:36 -0800 ++ ++u-boot (2015.10+dfsg1-1) unstable; urgency=medium ++ ++ [ Vagrant Cascadian ] ++ * New upstream version. ++ * Remove patch to fix variation caused by timezone differences, applied ++ upstream. ++ * Add patch to use a relative path to include the sunxi spl header, ++ which allows mksunxiboot to build on any architecture. Thanks to Ian ++ Campbell for the initial patch! ++ * Add patch from upstream to fix non-Android booting with ramdisk and/or ++ device tree. ++ ++ [ Karsten Merker ] ++ * u-boot-sunxi: Enable the A20-Olimex-SOM-EVB target (Closes: #803335). ++ ++ -- Vagrant Cascadian Thu, 29 Oct 2015 13:35:23 -0700 ++ ++u-boot (2015.10~rc4+dfsg1-1) unstable; urgency=medium ++ ++ * New upstream release candidate. ++ * Updated udoo patches and debian/targets, upstream switched to a single ++ target that supports both udoo quad and dual. ++ * u-boot-sunxi: Add Linksprite_pcDuino target (Closes: #799035). Thanks ++ to Robert Hegner for testing! ++ * Refreshed patches for beaglebone black. ++ * Add patch to fix build variation based on timezone, by removing call ++ to "mktime". ++ * debian/copyright: Updated new locations for exynos files. ++ ++ -- Vagrant Cascadian Wed, 30 Sep 2015 12:00:30 -0700 ++ ++u-boot (2015.10~rc2+dfsg1-1) experimental; urgency=medium ++ ++ * New upstream release candidate. ++ * Install mkenvimage. Patch from Ubuntu. ++ * Refreshed patches for arndale, beaglebone black, and mx53loco. ++ * Remove reproducibility patch, applied upstream. ++ ++ -- Vagrant Cascadian Tue, 01 Sep 2015 17:10:40 -0500 ++ ++u-boot (2015.07+dfsg1-1) unstable; urgency=medium ++ ++ [ Jochen Sprickerhof ] ++ * u-boot-sunxi: enable Mini-X target (Closes: #787266). ++ ++ [ Ian Campbell ] ++ * Add support for Tegra Jetson TK-1 (Closes: #788689) ++ ++ [ Vagrant Cascadian ] ++ New upstream version: ++ * mx6cuboxi: ++ - Remove patches applied upstream. ++ - Refresh distro bootcmd patch. ++ * wandboard: ++ - Remove wandboard SPL patch, applied upstream. ++ - Refresh distro bootcmd patch. ++ * beagleboneblack: ++ - Refresh distro bootcmd patch. ++ * udoo_quad: ++ - Refresh support patch. ++ * Drop no-error-on-set-but-unused-variable patch, no longer relevent. ++ * Add patch to ensure that CONFIG_SANDBOX is set when running "make env". ++ ++ * Use patch applied upstream to use SOURCE_DATE_EPOCH when set. ++ * debian/rules: Use the Date from debian/changelog to set ++ SOURCE_DATE_EPOCH. ++ ++ * Add example fw_env.config for mx6cuboxi (Closes: #786877). ++ * Add example fw_env.config for wandboard. ++ ++ * Add Build-Depends on dpkg-dev (>= 1.17.0), as debian/rules uses ++ "dpkg-parsechangelog --show-field" introduced in that ++ version. (Closes: #768099). ++ ++ * debian/watch: Update to use ftp server. ++ ++ -- Vagrant Cascadian Sat, 01 Aug 2015 07:29:07 -0700 ++ ++u-boot (2015.04+dfsg1-2) unstable; urgency=medium ++ ++ [ Joost van Zwieten ] ++ * u-boot-exynos: Enable odroid target. ++ ++ [ Vagrant Cascadian ] ++ * u-boot-imx/mx6cuboxi: ++ + Add patches to enable HDMI and USB support. ++ + Add patches to fix Ethernet PHY detection. ++ * u-boot-imx/wandboard: Add patch from u-boot-imx to build a single SPL ++ target for all variants. ++ ++ [ Robert Nelson ] ++ * u-boot-omap: Include u-boot.img instead of u-boot.bin for igep0020, ++ omap3_beagle and omap4_panda. ++ ++ -- Vagrant Cascadian Mon, 25 May 2015 20:36:37 -0700 ++ ++u-boot (2015.04+dfsg1-1) experimental; urgency=medium ++ ++ [ Ian Campbell ] ++ * u-boot-exynos: Fix conflict between arndale and sunxi spl ++ targets. ++ * u-boot-sunxi: Update sunxi FEL target. ++ ++ [ Vagrant Cascadian ] ++ * u-boot-imx: ++ + Add usbarmory target. ++ + Add novena target. ++ + Add patches from u-boot-imx to support Cubox-i and Hummingboard and ++ drop old cubox-i patches. ++ + Add mx6cuboxi target. ++ + mx6cuboxi: Add patch to use config_distro_bootcmd. ++ + wandboard: Add patch to use config_distro_bootcmd and remove old ++ environment patches. ++ ++ * u-boot-omap: ++ + am335x_boneblack: Remove patch to set voltage. ++ + am335x_boneblack: Add patch to use config_distro_bootcmd and remove ++ old patches. ++ ++ -- Vagrant Cascadian Mon, 27 Apr 2015 14:54:44 -0700 ++ ++u-boot (2015.04~rc5+dfsg1-1) experimental; urgency=medium ++ ++ [ John Paul Adrian Glaubitz ] ++ * [sh4] Fix FTBFS due to incorrect target names (Closes: #780066). ++ ++ [ Vagrant Cascadian ] ++ * [armel] Use "rpi" for the Raspberry pi target, as it was renamed ++ upstream. ++ * [armel] Remove openrd_ultimate target, which fails to build upstream. ++ * [armel] Remove obsolete mmc guruplug and openrd patches. ++ * [armhf] Remove arndale patches, applied upstream. ++ * Fix cross-building of u-boot-tools (Closes: #775614). ++ * [armhf] u-boot-sunxi: Enable A20-OLinuXino_MICRO. Thanks to Arne ++ Ploese for testing! ++ * [armhf] u-boot-sunxi: Enable Linksprite_pcDuino3. Thanks to Patrice Go ++ for testing! ++ ++ -- Vagrant Cascadian Tue, 07 Apr 2015 13:58:39 -0700 ++ ++u-boot (2015.04~rc3+dfsg1-1) experimental; urgency=medium ++ ++ * New upstream release candidate. ++ * Remove patches applied upstream: ++ - ti_armv7_common-support_raw_initrd.diff ++ * Refresh patches: ++ - cubox-i/cubox-i-support.diff ++ - mipsel-native-endianness.diff ++ - mx53loco ++ - openrd-mmc.diff ++ - series ++ - wandboard/wandboard-uEnv.txt-bootz-n-fixes.patch ++ - guruplug_mvfs_and_mmc.diff ++ * Add patch to enable USB mass-storage support for the BeagleBone Black: ++ - beagleboneblack/usb-mass-storage.patch ++ * debian/rules: Add get-orig-source target. ++ ++ * Disable patches that fail to apply: ++ - cubox-i/imx6-spl-support.diff ++ - arndale/exynos-Enable-config_distro_defaults.h.patch ++ - arndale/exynos5-Use-config_distro_bootcmd.h.patch ++ * Disable cubox-i build target and patches, as it fails to build. ++ ++ -- Vagrant Cascadian Sun, 08 Mar 2015 12:15:59 -0700 ++ ++u-boot (2014.10+dfsg1-5) unstable; urgency=medium ++ ++ [ John Paul Adrian Glaubitz ] ++ * [sh4] Fix FTBFS due to incorrect target names (Closes: #780066). ++ ++ [ Vagrant Cascadian ] ++ * [armhf] u-boot-sunxi: Enable A20-OLinuXino_MICRO. Thanks to Arne ++ Ploese for testing! ++ * [armhf] u-boot-sunxi: Enable Linksprite_pcDuino3. Thanks to Patrice Go ++ for testing! ++ ++ -- Vagrant Cascadian Tue, 07 Apr 2015 13:42:30 -0700 ++ ++u-boot (2014.10+dfsg1-4) unstable; urgency=medium ++ ++ [ Karsten Merker ] ++ * Backport support for the LeMaker Banana Pro board (Closes: #779908). ++ ++ [ Vagrant Cascadian ] ++ * Update lintian rules for BananaPro and A20-OlinuXino-LIME2. ++ ++ -- Vagrant Cascadian Sun, 08 Mar 2015 11:13:07 -0700 ++ ++u-boot (2014.10+dfsg1-3) unstable; urgency=medium ++ ++ * cubox-i-support.diff: Refresh patch, dropping solidrun.bmp, which ++ causes FTBFS with newer version of patch (Closes: #777518). ++ ++ * Add patch to support A20-OLinuXino-LIME2, backported from u-boot ++ 2015.01. Thanks to Karsten Merker for the patch (Closes: #777466). ++ ++ -- Vagrant Cascadian Sat, 21 Feb 2015 13:13:31 -0800 ++ ++u-boot (2014.10+dfsg1-2.1) unstable; urgency=medium ++ ++ * Non-maintainer upload. ++ * debian/patches: ++ - Add sh4-fix-linker-name-prefix.patch to use the proper ++ linker name prefix on sh4. Fixes FTBFS. (Closes: #771747) ++ ++ -- John Paul Adrian Glaubitz Thu, 11 Dec 2014 00:00:08 +0100 ++ ++u-boot (2014.10+dfsg1-2) unstable; urgency=medium ++ ++ [ Steve Langasek ] ++ * Resync cubox-i patches with github. ++ - fixes support for booting on the cubox-i2ultra/i2ex. ++ (Closes: #766266) ++ ++ [ Vagrant Cascadian ] ++ * wandboard, cubox-i: Add patches to use variables expected by ++ debian-installer bootscript. ++ * cubox-i: Move importing bootenv before loading the boot script, to ++ allow environment variables useful to the boot script to be set. ++ * cubox-i: Run autodetectfdt before attempting to load the boot script. ++ * Split README.Debian by subarchitecture, and document installing u-boot ++ on several additional boards. ++ ++ -- Vagrant Cascadian Sat, 01 Nov 2014 16:33:33 -0700 ++ ++u-boot (2014.10+dfsg1-1) unstable; urgency=medium ++ ++ [ Vagrant Cascadian ] ++ * New upstream release. ++ * Refresh cubox-i patches to 2014.10. ++ * Update cubox-i patches to use generic board. ++ * Remove debian/patches/kerma-sheevaplug-mvsata.diff, merged upstream. ++ * Patch to allow tools-only to build without a configuration. ++ * Update Standards-Version to 3.9.6, no changes needed. ++ ++ [ Ian Campbell ] ++ * Rebase arndale patches onto 2014.10 ++ ++ -- Vagrant Cascadian Sun, 19 Oct 2014 11:34:39 -0700 ++ ++u-boot (2014.10~rc3+dfsg1-2) experimental; urgency=medium ++ ++ [ Ian Campbell ] ++ * Add support for the Arndale board (Closes: #763186). ++ ++ -- Vagrant Cascadian Thu, 09 Oct 2014 11:41:31 -0700 ++ ++u-boot (2014.10~rc3+dfsg1-1) unstable; urgency=medium ++ ++ * New upstream release candidate. ++ * Remove patches applied upstream: ++ - bootcmd-scsi-scan-before-scsi.patch ++ - sunxi/0001-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch ++ * Refresh patches: ++ - am335x-bootscript.diff ++ - am335x-uenv.txt.diff ++ - cubox-i/cubox-i-support.diff ++ - no-force-CROSS_COMPILE-powerpc.diff ++ ++ -- Vagrant Cascadian Wed, 08 Oct 2014 09:57:35 -0700 ++ ++u-boot (2014.10~rc2+dfsg1-2) unstable; urgency=medium ++ ++ [ Héctor Orón Martínez ] ++ * Fix cross building. ++ * Build extra tools for kirkwood and sunxi (Closes: #750108). ++ * Build extra tools and env just once, and install in PATH again. ++ * Add nitrogen6q support to u-boot-imx. ++ ++ [ Vagrant Cascadian ] ++ * Use "make all" instead of making individual targets, recording a list ++ of targets to install in each subarch package. ++ * Build FEL variants for all sunxi platforms, based on patches from Ian ++ Campbell. ++ * Add build-depends on "bc". ++ * Patch to add the debian revision to the U-boot version. ++ * Updated cubox-i patches and re-enable mx6_cubox-i target. ++ * Build tools and env with NO_SDL=1 to avoid complaining about missing ++ sdl-config. ++ * Remove mips target dbau1100, an old platform with no testers. ++ * Swich qemu_mips target to install u-boot.bin, which is what is ++ actually needed by qemu. ++ * Add patch to Set DCDC1 DDR3 to 1.35V for Beaglebone Black. Thanks to ++ Robert Nelson for the patch. ++ ++ [ Ian Campbell ] ++ * Add patch to add u-boot.kwb to "make all" on Kirkwood platforms. ++ * Build tools out-of-tree too so as not to dirty the source used for the ++ actual platforms (Closes: #763024). ++ * Add patch to initialize scsi before trying scsi disks in ++ config_distro_bootcmd (Closes: #764069). ++ ++ -- Vagrant Cascadian Mon, 06 Oct 2014 16:58:04 -0700 ++ ++u-boot (2014.10~rc2+dfsg1-2~exp1) experimental; urgency=medium ++ ++ * Split u-boot package into u-boot-imx, u-boot-omap and u-boot-sunxi ++ packages on armhf. ++ ++ * debian/targets: ++ - Enable A10-OLinuXino-Lime target. ++ - Enable Cubieboard2 and Cubieboard2_FEL targets (Closes: #762383). ++ - Enable A20-OLinuXino-LIME target. ++ - Disable mx6_cubox-i ++ - Disable efikamx and efikasb. ++ ++ * debian/patches: ++ - Add patch from upstream to support A20-OLinuXino-LIME. ++ - Disable patches for cubox-i. ++ ++ * debian/rules: ++ - Remove excess conditional architecture check, drop build-dep on ++ dctrl-tools. ++ - Remove executable bit from u-boot targets. ++ ++ * Updated lintian overrides. ++ ++ -- Vagrant Cascadian Mon, 22 Sep 2014 18:30:12 -0500 ++ ++u-boot (2014.10~rc2+dfsg1-1) experimental; urgency=medium ++ ++ * New upstream release candidate. ++ ++ * Update debian/patches: ++ - Remove Cubieboard and Cubietruck patches, applied upstream. ++ - Remove kerma-sheevaplug-mvsdio patch, applied upstream. ++ - Update openrd-mmc patch, partially applied upstream. ++ - Add patch to workaround failure when building env tools. ++ ++ * [armhf] Add Bananapi target. ++ ++ * debian/rules: ++ - Install fw_printenv and fw_setenv symlink in platform-specific dir. ++ - Create include/config/auto.conf to allow tools-only target to build. ++ - Update to use defconfig target rather than config target. ++ ++ * debian/copyright: ++ - Update Files-Excluded as some files were removed upstream. ++ ++ * Updated lintian overrides. ++ ++ -- Vagrant Cascadian Wed, 03 Sep 2014 23:28:59 -0700 ++ ++u-boot (2014.07+dfsg1-2) unstable; urgency=medium ++ ++ [ Steve Langasek ] ++ * Rebase cubox-i patches on 2014.07 and re-enable the target. ++ ++ [ Vagrant Cascadian ] ++ * Switch to debhelper 9 with executable .install files. ++ * Remove the efikamx and efikasb targets. ++ ++ -- Vagrant Cascadian Sun, 14 Sep 2014 23:01:50 -0500 ++ ++u-boot (2014.07+dfsg1-1) unstable; urgency=medium ++ ++ * New upstream version. ++ * [armhf] Temporarily disable cubox-i target, which needs re-working for ++ new upstream version. ++ * Refresh Cubietruck and Cubieboard patches. ++ ++ -- Vagrant Cascadian Thu, 28 Aug 2014 12:22:06 -0700 ++ ++u-boot (2014.07~rc4+dfsg1-1) experimental; urgency=medium ++ ++ * New upstream release candidate. ++ * Updated patches for sheevaplug MMC and SATA support. ++ * Updated openrd patches to use MMC driver. ++ ++ -- Vagrant Cascadian Sat, 12 Jul 2014 17:24:51 -0700 ++ ++u-boot (2014.04+dfsg1-3) unstable; urgency=medium ++ ++ * Add patch for mx53loco that enables support for ext4, the "load" command, ++ and using bootz with raw initrds. ++ * Remove ZUMA platform and drop powerpc from u-boot architectures ++ (Closes: #754610). ++ ++ -- Vagrant Cascadian Mon, 28 Jul 2014 15:30:26 -0700 ++ ++u-boot (2014.04+dfsg1-2) unstable; urgency=medium ++ ++ * Enable udoo_quad target, with patch improving the udoo_quad boot ++ environment. Thanks to Michael Fladischer! (Closes: #753376). ++ * Enable Cubieboard target and patches. ++ * Update lintian overrides. ++ ++ -- Vagrant Cascadian Wed, 09 Jul 2014 12:37:12 -0700 ++ ++u-boot (2014.04+dfsg1-1) unstable; urgency=medium ++ ++ [ Vagrant Cascadian ] ++ * Repack upstream tarball to remove files containing firmware without ++ sources (Closes: #750912). ++ ++ * Add patches for Cubietruck from upstream. ++ * Add Cubietruck and Cubietruck_FEL targets (Closes: #750473). ++ ++ * Add support for bootscripts to BeagleBone Black. ++ - Support loading files from either first or second partition. ++ ++ * Modified wandboard patches: ++ - Add support for bootscripts. ++ - Support both fat and ext filesystems by consistantly using the "load" ++ command. ++ - Try loading bootscript from /boot/ as a fallback if not found in /. ++ ++ * Update debian/copyright to use copyright format 1.0. ++ - Document which files are removed in debian/copyright. ++ * Update debian/watch to handle +dfsg version. ++ * Update lintian overrides: ++ - Ignore 'u-boot: statically-linked-binary'. ++ - Include new u-boot targets. ++ ++ [ Andreas Henriksson ] ++ * Add patches for sunxi AHCI driver (Cubietruck) (Closes: #750473). ++ ++ -- Vagrant Cascadian Sun, 15 Jun 2014 21:03:40 -0700 ++ ++u-boot (2014.04-2) unstable; urgency=medium ++ ++ * Fix FTBFS on powerpc by not setting CROSS_COMPILE when empty. ++ ++ -- Vagrant Cascadian Mon, 26 May 2014 11:32:49 -0700 ++ ++u-boot (2014.04-1) unstable; urgency=low ++ ++ [ Steve Langasek ] ++ * Patches taken from https://github.com/rabeeh/u-boot-imx6.git to support ++ the SolidRun CuBox-i series: ++ - debian/patches/spl-sata-support.diff: ++ Add support for SATA in SPL mode ++ - debian/patches/imx6-spl-support.diff: ++ Add support for SPL on i.MX6-based systems ++ - debian/patches/cubox-support.diff, tools/logos/solidrun.bmp: ++ Add support for the CuBox-i. ++ * Build the mx6_cubox-i target (Closes: #741127). ++ ++ [ Vagrant Cascadian ] ++ * Add Nokia nokia_rx51 (n900) to targets to build. ++ - Patch n900 build to support bootz and raw initrds. ++ * debian/rules: Fix building of targets for v2014.04. ++ - Move fw_printenv creation into board-specific targets. ++ - Build target "tools-only". ++ - Drop special-casing of MLO, add MLO to debian/targets. ++ * debian/patches/cubox-i-raw-initrd.diff: ++ - Patch to support raw initrd on cubox-i. ++ * debian/watch: Use http. ++ * debian/control: Bump Standards-Version to 3.9.5, no changes needed. ++ ++ -- Vagrant Cascadian Tue, 20 May 2014 10:04:56 -0700 ++ ++u-boot (2014.01-2) unstable; urgency=medium ++ ++ * Set Maintainer to Vagrant Cascadian (Closes: #738446). ++ * Remove Micah Anderson from uploaders. ++ * Add Clint Adams to uploaders. ++ * Use grep-dctrl to pull architecture list from debian/control, rather than ++ hardcoding architectures in debian/rules. ++ * u-boot-tools: Set architecture to linux-any (Closes: #730833). ++ * Build raspberry pi (rpi_b) image on armel. ++ - Patch to to enable EXT2/EXT4 support and raw initrds. ++ ++ -- Vagrant Cascadian Tue, 04 Mar 2014 14:13:22 -0800 ++ ++u-boot (2014.01-1) unstable; urgency=low ++ ++ * New upstream version. ++ * Updated patches. ++ * debian/watch: Update to catch -rc versions. ++ * debian/control: Update Vcs-* headers. ++ * u-boot-tools: Strip comment sections from mkimage and fw_printenv. ++ ++ -- Vagrant Cascadian Tue, 11 Feb 2014 15:11:47 -0800 ++ ++u-boot (2013.10-3) unstable; urgency=low ++ ++ * Move build of dbau1100 from mipsel to mips, which fixes FTBFS on mipsel, ++ due to dbau1100 being big-endian. ++ * Disable mipsel builds of u-boot, as it no longer has any targets. ++ * Add patch to specify default mmc partition to use when loading uEnv.txt ++ on BeagleBone Black. ++ * Add patch to support raw initrds on BeagleBone Black. ++ * Mark u-boot-tools as Multi-Arch: foreign. ++ * Mark u-boot as Multi-Arch: same. ++ * Update lintian overrides with list of current platforms. ++ ++ -- Vagrant Cascadian Sun, 17 Nov 2013 00:09:32 -0800 ++ ++u-boot (2013.10-2) unstable; urgency=low ++ ++ * debian/rules: ++ - Switch back to explicitly building the specified target. ++ - Allow building multiple targets per platform. ++ * debian/targets: ++ - Build the spl/u-boot-spl.bin target on several armhf platforms, which ++ generates the MLO file. ++ ++ -- Vagrant Cascadian Mon, 21 Oct 2013 11:33:01 -0700 ++ ++u-boot (2013.10-1) unstable; urgency=low ++ ++ * New upstream version (Closes: #667680, #726699). ++ - Update mipsel-native-endianness.diff ++ * debian/rules: ++ - Remove various tools/* files on clean target. ++ - Build each platform target and install MLO file if present. ++ (Closes: #687562). ++ - Support parallel builds using DEB_BUILD_OPTIONS=parallel=N. ++ * Enable BeagleBone Black and Wandboard platforms. ++ * Add patch to support uEnv.txt and directly loading zimage for Wandboard. ++ * Include env configs u-boot-tools examples (Closes: #631659, #636214). ++ * Only build u-boot on architectures which generate images (Closes: #635050). ++ * Drop i386 builds of u-boot, as the only target (eNET) was removed upstream. ++ * debian/control: Add myself to uploaders. ++ ++ -- Vagrant Cascadian Sun, 20 Oct 2013 10:23:55 -0700 ++ ++u-boot (2013.01.01-4) unstable; urgency=low ++ ++ * Upload to unstable. ++ * Drop transitional packages uboot-envtools and uboot-mkimage. ++ ++ -- Clint Adams Thu, 09 May 2013 21:41:25 -0400 ++ ++u-boot (2013.01.01-3) experimental; urgency=low ++ ++ * Disable unnecessary JFFS2 on GuruPlug ++ * Disable MMC on GuruPlug, devices are not detected, ++ they show up as USB devices instead ++ ++ -- Micah Anderson Mon, 25 Mar 2013 22:56:32 -0400 ++ ++u-boot (2013.01.01-2) experimental; urgency=low ++ ++ * More properly enable MMC on GuruPlug. ++ * Use new Efika target names. ++ * Bump to Standards-Version 3.9.4. ++ ++ -- Clint Adams Sun, 24 Mar 2013 21:59:03 -0400 ++ ++u-boot (2013.01.01-1) experimental; urgency=low ++ ++ * New upstream version. closes: #699232. ++ - Drop strip-env-tools.diff (merged). ++ - Update kerma-sheevaplug-mvsdio.diff. ++ - Update mipsel-native-endianness.diff ++ * Enable CONFIG_SYS_MVFS and CONFIG_CMD_MMC for GuruPlug. ++ ++ -- Clint Adams Thu, 21 Mar 2013 14:21:33 -0400 ++ ++u-boot (2012.04.01-2) unstable; urgency=low ++ ++ * Remove code duplication in kerma-sheevaplug-mvsdio.diff. ++ closes: #674230. ++ ++ -- Clint Adams Thu, 31 May 2012 21:04:49 -0400 ++ ++u-boot (2012.04.01-1) unstable; urgency=low ++ ++ * New upstream version. ++ - Update mipsel-native-endianness.diff. ++ - Update no-error-on-set-but-unused-variables.diff (partially merged). ++ - Drop kirkwood_spi-irq_mask.diff (merged). ++ - Drop kirkwood-disable-l2c.diff (merged). ++ ++ -- Clint Adams Tue, 01 May 2012 18:07:19 -0400 ++ ++u-boot (2011.12-3) unstable; urgency=low ++ ++ [ Jonathan Nieder ] ++ * kirkwood: disable L2 cache before Linux boot; thanks to Ian Campbell. ++ closes: #658904 ++ ++ [ Loïc Minier ] ++ * Add patch to strip env tools; sent to upstream mailing-list. ++ ++ -- Loïc Minier Sun, 11 Mar 2012 16:12:50 +0100 ++ ++u-boot (2011.12-2) unstable; urgency=low ++ ++ [ Loïc Minier ] ++ * Build u-boot.imx for efikasb on armhf ++ ++ [ Clint Adams ] ++ * Patch from Ian Campbell to fix Dreamplug breakage. closes: #655102. ++ ++ -- Clint Adams Sun, 08 Jan 2012 15:11:03 -0500 ++ ++u-boot (2011.12-1) unstable; urgency=low ++ ++ * New upstream version. ++ - Drop build-timestamp_autogenerated.h-without-config.patch (merged). ++ - Drop ublimage-NAND-block-size-isn-t-set-at-build-time.patch (merged). ++ - Update kerma-sheevaplug-mvsdio.diff ++ - Update mipsel-native-endianness.diff ++ - Drop dreamplug-v8.patch (merged). ++ ++ -- Clint Adams Mon, 02 Jan 2012 17:49:39 -0500 ++ ++u-boot (2011.09-2) unstable; urgency=low ++ ++ * Patch from Pino Toscano to build on the Hurd. ++ closes: #648295. ++ * Drop gr_xc3s_1500 target. ++ * Add build-arch and build-indep targets to debian/rules. ++ ++ -- Clint Adams Tue, 15 Nov 2011 23:53:01 -0500 ++ ++u-boot (2011.09-1) unstable; urgency=low ++ ++ [ Hector Oron ] ++ * Enable MX53LOCO platform. ++ * Update lintian overrides. ++ ++ [ Loïc Minier ] ++ * Fix FTBFS on amd64 and allow `make tools` to succeed without ++ config. ++ ++ [ Clint Adams ] ++ * New upstream version. ++ - Update kerma-sheevaplug-mvsdio.diff. ++ - Drop panda-default-console.diff (refactored). ++ - Replace dreamplug patches with Jason's v8. ++ * Add Buffalo Linkstation Mini env config from Benjamin Cama. ++ ++ -- Clint Adams Fri, 30 Sep 2011 21:22:23 -0400 ++ ++u-boot (2011.06-4) unstable; urgency=low ++ ++ * Increase the USB non-bulk timeout by an order of magnitude. ++ May fix #635774. ++ ++ -- Clint Adams Sat, 06 Aug 2011 13:42:52 -0400 ++ ++u-boot (2011.06-3) unstable; urgency=low ++ ++ * Add DreamPlug support. ++ ++ -- Clint Adams Sun, 24 Jul 2011 09:35:32 -0400 ++ ++u-boot (2011.06-2) unstable; urgency=low ++ ++ * Use -Wno-error=unused-but-set-variable on i386. ++ ++ -- Clint Adams Sat, 02 Jul 2011 22:14:44 -0400 ++ ++u-boot (2011.06-1) unstable; urgency=low ++ ++ * New upstream version. ++ * Fix i386 and mipsel builds. ++ ++ -- Clint Adams Sat, 02 Jul 2011 19:25:28 -0400 ++ ++u-boot (2011.06~rc3-1) unstable; urgency=low ++ ++ * New upstream version. ++ ++ -- Clint Adams Sat, 02 Jul 2011 15:50:46 -0400 ++ ++u-boot (2011.06~rc2-2) unstable; urgency=low ++ ++ * Fix mipsel endianness problem again. ++ * Try building gr_xc3s_1500 on sparc. ++ ++ -- Clint Adams Sat, 18 Jun 2011 10:13:53 -0400 ++ ++u-boot (2011.06~rc2-1) unstable; urgency=low ++ ++ * New upstream version. ++ * Fix tools config selection. ++ ++ -- Clint Adams Tue, 14 Jun 2011 20:53:07 -0400 ++ ++u-boot (2011.06~rc1-1) unstable; urgency=low ++ ++ * New upstream version. ++ - Update mipsel-native-endianness.diff ++ - Drop Drop-config.h-include-in-tools-imximage.h.diff (merged). ++ - Drop openrd-client-and-ultimate.diff (merged). ++ - Update openrd-mmc.diff (formerly openrd-mmc-mtd-fat.diff). ++ - Drop eNET-monitor_flash_len.diff (merged). ++ - Update snapshot.commit to 2011.06-rc1. ++ - Use the first target for each arch to build the tools, or ++ fake it on the other architectures. ++ * Only build efikamx image on armhf. ++ ++ -- Clint Adams Sat, 21 May 2011 11:04:30 -0400 ++ ++u-boot (2011.03-6) unstable; urgency=low ++ ++ * Bump to Standards-Version 3.9.2. ++ * Tweak the u-boot-tools description. ++ * Drop igep0020, omap3_beagle, and omap4_panda targets from ++ armel; they are available on armhf. ++ ++ -- Clint Adams Tue, 26 Apr 2011 16:11:24 -0400 ++ ++u-boot (2011.03-5) unstable; urgency=low ++ ++ [ Sebastian Reichel ] ++ * Add Pandaboard target. closes: #624123 ++ * New patch to change default console on Pandaboard. ++ ++ -- Clint Adams Mon, 25 Apr 2011 15:36:16 -0400 ++ ++u-boot (2011.03-4) unstable; urgency=low ++ ++ * Enable FAT, SD/MMC, MTD, JFFS, UBIFS support on OpenRD boards. ++ ++ -- Clint Adams Wed, 13 Apr 2011 18:05:36 -0400 ++ ++u-boot (2011.03-3) unstable; urgency=low ++ ++ * Actually pass the right arch_number for OpenRD-Ultimate. ++ ++ -- Clint Adams Tue, 12 Apr 2011 14:28:20 -0400 ++ ++u-boot (2011.03-2) unstable; urgency=low ++ ++ * Fix i386 FTBFS with eNET-monitor_flash_len.diff ++ * Add patch for OpenRD-Client and OpenRD-Ultimate. ++ * Drop openrd_base target and add openrd_ultimate target. ++ ++ -- Clint Adams Tue, 05 Apr 2011 15:56:43 -0400 ++ ++u-boot (2011.03-1) unstable; urgency=low ++ ++ [ Loïc Minier ] ++ * Only try to build env tools when Linux MTD headers are present. ++ closes: #619673. ++ ++ [ Clint Adams ] ++ * New upstream version. ++ - Drop fix-definition-of-global_data-struct.diff (now upstream). ++ - Drop EfikaMX-switch-to-MACH_TYPE_MX51_EFIKAMX.diff (upstream now). ++ - Drop sh-sh7785lcr-Fix-out-of-tree-building.diff (upstream now). ++ - Drop MIPS-dbau1x00-Remove-unused-flash-driver-stub.diff (upstream now). ++ - Drop x86-Align-config.mk-and-linker-scripts-with-other-ar.diff ++ (upstream now). ++ - Update snapshot.commit to 2011.03 ++ ++ -- Clint Adams Fri, 01 Apr 2011 10:30:46 -0400 ++ ++u-boot (2011.03~rc1-4) experimental; urgency=low ++ ++ * Add patch x86-Align-config.mk-and-linker-scripts-with-other-ar. ++ From upstream mailing-list; fixes x86 build (eNET). ++ ++ -- Loïc Minier Wed, 09 Feb 2011 14:51:01 +0100 ++ ++u-boot (2011.03~rc1-3) experimental; urgency=low ++ ++ * Add debian/source/local-options ++ - unapply-patches: avoids committing patched tree after a build ++ - abort-on-upstream-changes: avoids creating a debian-changes-* patch ++ when building from a dirty tree ++ * Add patch MIPS-dbau1x00-Remove-unused-flash-driver-stub, ++ from u-boot-mipsel.git 17a990b55008fd79636e4880d9d10b7172ca87ce and also ++ sent to the upstream mailing-list; fixes build of dbau1x00 board by ++ removing board/dbau1x00/flash.c entirely, and hence fixes the build of ++ u-boot on mipsel. ++ ++ -- Loïc Minier Tue, 08 Feb 2011 16:49:05 +0100 ++ ++u-boot (2011.03~rc1-2) experimental; urgency=low ++ ++ * New patch sh-sh7785lcr-Fix-out-of-tree-building; from upstream ++ e72f46787f44c1104a8df18511ab230b6072a1f0; fixes Debian sh4 build; thanks ++ Nobuhiro Iwamatsu; closes: #611873. ++ ++ -- Loïc Minier Mon, 07 Feb 2011 17:20:16 +0100 ++ ++u-boot (2011.03~rc1-1) experimental; urgency=low ++ ++ * dpkg-shlibdeps usr/bin/* rather than just mkimage. ++ * uboot-mkimage's Section is utils. ++ * Allow overriding CROSS_COMPILE. ++ * New upstream release candidate. ++ - Merge commit v2011.03-rc1 ++ - Update snapshot.commit to 2011.03-rc1 ++ * Add EfikaMX support. ++ - Add patch EfikaMX-switch-to-MACH_TYPE_MX51_EFIKAMX from the upstream ++ mailing-list; fixes build on EfikaMX (EfikaMX: switch to ++ MACH_TYPE_MX51_EFIKAMX) ++ - Add patch Drop-config.h-include-in-tools-imximage.h from the upstream ++ mailing-list; fixes tools-all build of imximage.c. ++ - Build u-boot.imx for efikamx on armel. ++ * Refresh patch kerma-sheevaplug-mvsdio to fix fuzz. ++ ++ -- Loïc Minier Thu, 03 Feb 2011 13:13:14 +0100 ++ ++u-boot (2010.12-2) unstable; urgency=low ++ ++ * Avoid calling dpkg-architecture if DEB_HOST_ARCH is set. ++ * Misc refactoring of debian/rules. ++ - Split per architecture list of platform and targets into ++ debian/targets. ++ - Actually use INSTALL_FILE/INSTALL_DIR/INSTALL_PROGRAM. ++ - Add support for cross-builds; these will currently lack tools. ++ - Build board-specific u-boot files in a separate build dir from the ++ generic tools ++ * Fix handling of -Wl,foo LDFLAGS; the upstream build passes LDFLAGS ++ directly to ld instead of calling gcc for linking; so instead of passing ++ -Wl,foo in LDFLAGS as in automake builds, one should set LDFLAGS to foo ++ directly; add a snippet to strip -Wl, from LDFLAGS; alternatively, we ++ could do as in other special packages like the kernel and simply unset ++ LDFLAGS entirely; closes: #607613. ++ * Install and compress upstream mkimage manpage; based on a patch by ++ Marcin Juszkiewicz. ++ * Add a dummy uboot-mkimage package for upgrades from squeeze; based on a ++ patch by Marcin Juszkiewicz; closes: #607618. ++ * Add new patch, fix-definition-of-global_data-struct, from the upstream ++ x86 maintainer; fixes build of eNET board which breaks u-boot's build on ++ i386; closes: #608801. ++ * Workaround an upstream bug in distclean by removing include/asm/proc and ++ /arch explicitly for now; patch was sent upstream. ++ * Don't repeat Section: in binary package. ++ * Add myself to Uploaders. ++ * Split tools in u-boot-tools package. ++ * Drop board-specific tools; these are too dangerous; only ship mkimage for ++ now. ++ * Add igep0020 and omap3_beagle builds on armel ++ * Update snapshot.commit to the 2010.12 release contents; this avoids a ++ pointless diff with the tarball. ++ ++ -- Loïc Minier Mon, 17 Jan 2011 22:43:41 +0100 ++ ++u-boot (2010.12-1) unstable; urgency=low ++ ++ * New upstream version. ++ * Install more tools in preparation for splitting off a ++ u-boot-tools binary package. ++ ++ -- Clint Adams Tue, 28 Dec 2010 17:03:44 -0500 ++ ++u-boot (2010.12~rc3-1) unstable; urgency=low ++ ++ * New upstream release candidate. ++ * Add dockstar target. ++ ++ -- Clint Adams Sun, 19 Dec 2010 09:45:42 -0500 ++ ++u-boot (2010.12~rc2-1) unstable; urgency=low ++ ++ * New upstream release candidate. ++ * Add openrd_base target. ++ ++ -- Clint Adams Sat, 04 Dec 2010 15:32:38 -0500 ++ ++u-boot (2010.09-2) unstable; urgency=low ++ ++ * Enable ext2 commands on GuruPlug. ++ * Ship ELF files (for loading into RAM with OpenOCD). ++ ++ -- Clint Adams Sat, 20 Nov 2010 18:20:40 -0500 ++ ++u-boot (2010.09-1) unstable; urgency=low ++ ++ * New upstream release. ++ ++ -- Clint Adams Wed, 29 Sep 2010 00:06:25 -0400 ++ ++u-boot (2010.09~rc2-1) unstable; urgency=low ++ ++ * New upstrem release candidate. ++ ++ -- Clint Adams Sun, 19 Sep 2010 14:20:52 -0400 ++ ++u-boot (2010.09~rc1-2) unstable; urgency=low ++ ++ * Add patch from Gérald Kerma to add Sheevaplug mvsata support. ++ * Add patch from Gérald Kerma to add Sheevaplug mvsdio support. ++ ++ -- Clint Adams Sun, 12 Sep 2010 11:48:22 -0400 ++ ++u-boot (2010.09~rc1-1) unstable; urgency=low ++ ++ * New upstream release candidate. ++ - Drop guruplug-miiphy_reset.diff. ++ - Update mipsel-native-endianness.diff. ++ - Drop sh4-native-compile.diff. ++ * Bump to Standards-Version 3.9.1. ++ ++ -- Clint Adams Sat, 11 Sep 2010 00:43:04 -0400 ++ ++u-boot (2010.06-1) unstable; urgency=low ++ ++ * New upstream version. ++ ++ -- Clint Adams Sat, 03 Jul 2010 13:49:46 -0400 ++ ++u-boot (2010.06~rc3-1) unstable; urgency=low ++ ++ * New upstream version. ++ * Fix sh4-native-compile.diff to not break sh64, thanks to Paul ++ Mundt. ++ * Ship mkimage, conflict/replace uboot-mkimage, build on all ++ architectures. ++ ++ -- Clint Adams Fri, 25 Jun 2010 14:49:06 -0400 ++ ++u-boot (2010.06~rc2-1) unstable; urgency=medium ++ ++ * Add sh4-native-compile.diff from Aurelien Jarno. closes: #586026. ++ * New upstream version. ++ - Drop marvell-machtypes.diff. ++ ++ -- Clint Adams Tue, 15 Jun 2010 21:37:26 -0400 ++ ++u-boot (2010.06~rc1-6) unstable; urgency=medium ++ ++ * Add guruplug-miiphy_reset.diff. ++ * Clean between targets. closes: #585570. ++ ++ -- Clint Adams Fri, 11 Jun 2010 21:57:31 -0400 ++ ++u-boot (2010.06~rc1-5) unstable; urgency=low ++ ++ * Replace mipsel-native-endianness.diff with patch adapted ++ from a 2008 mailing list posting by Shinya Kuribayashi. ++ ++ -- Clint Adams Fri, 04 Jun 2010 20:08:27 -0400 ++ ++u-boot (2010.06~rc1-4) unstable; urgency=low ++ ++ * Add r2dplus target for sh4. ++ * mipsel-native-endianness.diff: don't force endianness on mips/mipsel ++ ++ -- Clint Adams Thu, 03 Jun 2010 19:32:50 -0400 ++ ++u-boot (2010.06~rc1-3) unstable; urgency=low ++ ++ * Fix mipsel typo. ++ * Apply patch from Nobuhiro Iwamatsu to change sh4 target board ++ from espt to sh7785lcr_32bit. closes: #584192. ++ ++ -- Clint Adams Wed, 02 Jun 2010 08:25:04 -0400 ++ ++u-boot (2010.06~rc1-2) unstable; urgency=low ++ ++ * Produce u-boot.bin on i386. ++ * Switch mipsel target to AMD DBAu1100. ++ * Add marvell-machtypes.diff. ++ ++ -- Clint Adams Mon, 31 May 2010 22:09:29 -0400 ++ ++u-boot (2010.06~rc1-1) unstable; urgency=low ++ ++ * Add Vcs-Git and Vcs-Browser headers. ++ * Add GuruPlug target (armel). ++ * Switch mipsel target to TB0229. ++ * Add watch file. ++ * Update README.Debian for SheevaPlug and GuruPlug. ++ ++ -- Clint Adams Mon, 31 May 2010 19:29:40 -0400 ++ ++u-boot (2010.03-1) unstable; urgency=low ++ ++ * Initial packaging. closes: #583605. ++ ++ -- Clint Adams Fri, 28 May 2010 16:20:39 -0400 diff --cc debian/compat index 000000000,000000000..f11c82a4c new file mode 100644 --- /dev/null +++ b/debian/compat @@@ -1,0 -1,0 +1,1 @@@ ++9 diff --cc debian/control index 000000000,000000000..f3a9d9501 new file mode 100644 --- /dev/null +++ b/debian/control @@@ -1,0 -1,0 +1,37 @@@ ++Source: u-boot ++Section: admin ++Priority: optional ++Maintainer: Vagrant Cascadian ++Uploaders: Loïc Minier , Clint Adams ++Build-Depends: debhelper (>= 9), bc, device-tree-compiler, dpkg-dev (>= 1.17.0) ++Standards-Version: 3.9.6 ++Homepage: http://www.denx.de/wiki/U-Boot/ ++Vcs-Git: git://anonscm.debian.org/collab-maint/u-boot.git ++Vcs-Browser: http://anonscm.debian.org/gitweb/?p=collab-maint/u-boot.git;a=summary ++ ++Package: u-boot ++Architecture: armel armhf avr32 mips sh4 ++Multi-Arch: same ++Depends: ${misc:Depends} ++Description: A boot loader for embedded systems ++ Das U-Boot is a cross-platform bootloader for embedded systems, ++ used as the default boot loader by several board vendors. It is ++ intended to be easy to port and to debug, and runs on many ++ supported architectures, including PPC, ARM, MIPS, x86, m68k, ++ NIOS, and Microblaze. ++ ${uboot:platforms} ++ ++Package: u-boot-tools ++Architecture: linux-any ++Multi-Arch: foreign ++Depends: ${shlibs:Depends}, ${misc:Depends} ++Breaks: uboot-envtools (<< 20081215-3~), ++ uboot-mkimage (<= 0.4build1), ++ u-boot (<< 2010.12-2) ++Replaces: uboot-envtools (<< 20081215-3~), ++ uboot-mkimage (<= 0.4build1), ++ u-boot (<< 2010.12-2) ++Description: companion tools for Das U-Boot bootloader ++ This package includes the mkimage program, which allows generation of U-Boot ++ images in various formats, and the fw_printenv and fw_setenv programs to read ++ and modify U-Boot's environment. diff --cc debian/copyright index 000000000,000000000..df7eb425a new file mode 100644 --- /dev/null +++ b/debian/copyright @@@ -1,0 -1,0 +1,411 @@@ ++Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ ++Upstream-Name: Das U-Boot ++Source: ftp://ftp.denx.de/pub/u-boot/ ++Files-Excluded: *fpgadata* ++ arch/powerpc/cpu/mpc8xx/upatch.c ++ drivers/dma/MCD_tasks.c ++ ++Files: * ++Copyright: 2000-2013 Wolfgang Denk ++ 1995-2002 Russell King ++ 1996-1998 Russell King ++ 1996-1999 Russell King ++ 1996-2000 Russell King ++ 1996 Russell King ++ 1997-1999 Russell King ++ 1999-2002 Vojtech Pavlik ++ 1999 Linus Torvalds / 2000-2002 Transmeta Corporation ++ 1999 Russell King ++ 2000-2002 Russell King ++ 2000-2010 David Woodhouse ++ 2000 Steven J. Hill (sjhill@realitydiluted.com) ++ 2001, 2002, 2003 / 2004 Gary Jennejohn garyj@denx.de ++ 2002-2007 Aleph One Ltd ++ 2002-2011 Aleph One Ltd ++ 2002 Thomas Gleixner (tglx@linutronix.de) ++ 2003 Kai-Uwe Bloem / 2000-2002 Transmeta Corporation / 1999 Linus Torvalds ++ 2004 by David Brownell ++ 2004 Nokia Corporation ++ 2004 Thomas Gleixner (tglx@linutronix.de) ++ 2005-2006 by Texas Instruments ++ 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation / 2006-2007 Nokia Corporation ++ 2005-2007 Samsung Electronics ++ 2005-2007 Samsung Electronics / Samsung Electronics, 2009 / Nokia Corporation, 2007 ++ 2005-2008 Samsung Electronics ++ 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2006-2007 Nokia Corporation ++ 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2008-2009 MontaVista Software, Inc. / 2006-2007 Nokia Corporation ++ 2005, Seagate Technology LLC / 2008 Stefan Roese , DENX Software Engineering ++ 2006-2007 Nokia Corporation / 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation ++ 2006-2007 Nokia Corporation / 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments ++ 2006-2007 Nokia Corporation / 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2008-2009 MontaVista Software, Inc. ++ 2006, 2007 University of Szeged, Hungary / 2006-2008 Nokia Corporation ++ 2006-2008 Nokia Corporation ++ 2006,2009 Freescale Semiconductor, Inc ++ 2006-2009 Solarflare Communications Inc ++ 2006 Freescale Semiconductor, Inc ++ 2006 Nokia Corporation / 2005-2007 by Texas Instruments ++ 2006 Pavel Pisa, PiKRON / 2008 Sascha Hauer, Pengutronix / 2009 Ilya Yanok, ++ 2006 Thomas Gleixner ++ 2007-2011 Freescale Semiconductor, Inc ++ 2007 Freescale Semiconductor, Inc ++ 2008-2009 / 2006-2008 Nokia Corporation ++ 2008-2009 Freescale Semiconductor, Inc ++ 2008-2009, MontaVista Software, Inc. / 2010, by Texas Instruments ++ 2008,2009 STMicroelectronics / 2010 Joakim Axelsson / 2009 Alessandro Rubini ++ 2008-2010 / 2006-2008 Nokia Corporation ++ 2008-2011 Freescale Semiconductor, Inc ++ 2008, 2011 Freescale Semiconductor, Inc ++ 2008,2011 Freescale Semiconductor, Inc ++ 2008-2012 Freescale Semiconductor, Inc ++ 2008 Altera Corporation / 2010 Thomas Chou ++ 2008 Atmel Corporation / 2013 Jagannadha Sutradharudu Teki, Xilinx Inc ++ 2008 by Texas Instruments / 2008 Mentor Graphics Corporation ++ 2008 Dave S.r.l. ++ 2008 Extreme Engineering Solutions, Inc ++ 2008 Freescale Semiconductor, Inc ++ 2008 Jean-Christophe PLAGNIOL-VILLARD / 2004-2007 ARM Limited ++ 2008 Kim B. Heino / 2009 ++ 2008 Qstreams Networks, Inc ++ 2008 Samsung Electronics / 2008-2009 Stefan Roese , DENX Software Engineering ++ 2008 STMicroelectronics / 2010 Joakim Axelsson / 2009 Alessandro Rubini ++ 2008 Yoshihiro Shimoda ++ 2009-2010 eXMeritus, A Boeing Company / 2008-2009 Freescale Semiconductor, Inc ++ 2009-2010 Freescale Semiconductor, Inc ++ 2009-2010 Texas Instruments, Inc ++ 2009-2011 Freescale Semiconductor, Inc ++ 2009 coresystems GmbH ++ 2009 Freescale Semiconductor, Inc ++ 2009 Micrel Inc / 2011 Bticino s.p.a, Roberto Cerati ++ 2009 MontaVista Software, Inc. / 2006-2007 Nokia Corporation / 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation ++ 2010-2011 Freescale Semiconductor, Inc ++ 2010-2011 NVIDIA Corporation ++ 2010-2012 NVIDIA Corporation ++ 2010-2013 NVIDIA Corporation ++ 2010 Broadcom / 2012 Oleksandr Tymoshenko / 2012 Stephen Warren ++ 2010 NISHIMOTO Hiroki / 2010 Renesas Solutions Corp ++ 2010 Thomas Chou ++ 2010, Thomas Chou ++ 2010 Thomas Chou / 2008-2009 Avionic Design GmbH / 2007-2008 Avionic Design Development GmbH ++ 2010 Thomas Chou / 2008 Altera Corporation ++ 2011-2012 Renesas Solutions Corp ++ 2011 - 2012 Samsung Electronics / 2003-2006, Cluster File Systems, Inc, info@clusterfs.com ++ 2011 Analog Devices Inc ++ 2011 Freescale Semiconductor, Inc ++ 2011 Infineon Technologies ++ 2011 Ivan Djelic ++ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 1995-2002 Russell King / 2010 Shawn Lin (nobuhiro@andestech.com) ++ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 1996-1998 Russell King / 2010 Shawn Lin (nobuhiro@andestech.com) ++ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 2010 Shawn Lin (nobuhiro@andestech.com) ++ 2011 Maxim Integrated Products ++ 2011 Parrot S.A ++ 2011 Renesas Solutions Corp ++ 2011 Renesas Solutions Corp / 2011 Kuninori Morimoto ++ 2011 The ChromiumOS Authors. All rights reserved ++ 2012-2013 Stephen Warren ++ 2012, by Texas Instruments ++ 2012, Google Inc ++ 2012 Renesas Solutions Corp ++ 2012 Samsung Electronics Co., Ltd ++ 2012 Stephen Warren ++ 2012 Texas Instruments Incorporated - http://www.ti.com/ ++ 2013 Synopsys, Inc. (www.synopsys.com) ++License: GPL-2 ++ ++Files: ++ drivers/tpm/tpm_atmel_twi.c ++ drivers/gpio/tca642x.c ++ include/splash.h ++ include/fdt.h ++ include/libfdt.h ++ include/configs/controlcenterd.h ++ include/configs/mxs.h ++ include/configs/T1040QDS.h ++ include/tca642x.h ++ board/gdsys/p1022/tlb.c ++ board/gdsys/p1022/sdhc_boot.c ++ board/gdsys/p1022/ddr.c ++ board/gdsys/p1022/controlcenterd-id.c ++ board/gdsys/p1022/diu.c ++ board/gdsys/p1022/controlcenterd-id.h ++ board/gdsys/p1022/controlcenterd.c ++ board/gdsys/p1022/law.c ++ board/gdsys/common/dp501.h ++ common/splash.c ++ fs/jffs2/compr_lzo.c ++ arch/arm/include/asm/arch-am33xx/hardware_ti816x.h ++ arch/arm/mach-exynos/dmc_init_exynos4.c ++ arch/arm/mach-exynos/lowlevel_init.c ++ arch/arm/mach-exynos/clock_init_exynos4.c ++ arch/arm/mach-exynos/common_setup.h ++ arch/arm/cpu/armv7/am33xx/clock_ti816x.c ++Copyright: ++ 2013 Texas Instruments, Inc ++ 2013, Boundary Devices ++ 2006 David Gibson, IBM Corporation ++ 2012 Kim Phillips, Freescale Semiconductor ++ 2010-2013 Freescale Semiconductor, Inc ++ 2013 Marek Vasut ++ 2010-2011 Freescale Semiconductor, Inc ++ 2004 Patrik Kluba ++ 1996-2002 Markus Franz Xaver Johannes Oberhumer ++ 2013 NVIDIA Corporation ++ 2011 The Chromium OS Authors ++ 2013 Samsung Electronics ++ 2013, Adeneo Embedded ++ 2009, Texas Instruments, Incorporated ++License: GPL-2+ ++ ++Files: debian/* ++Copyright: Clint Adams ++ Joey Hess ++ Marc Singer ++ Per Andersson ++ Vagrant Cascadian ++ Loïc Minier ++License: GPL-2+ ++ ++Files: fs/yaffs2/yaffs_allocator.h ++ fs/yaffs2/yaffs_verify.h ++ fs/yaffs2/yaffs_packedtags1.h ++ fs/yaffs2/yaffs_yaffs1.h ++ fs/yaffs2/ydirectenv.h ++ fs/yaffs2/yaffs_yaffs2.h ++ fs/yaffs2/yaffsfs.h ++ fs/yaffs2/yaffs_osglue.h ++ fs/yaffs2/yaffs_flashif.h ++ fs/yaffs2/yaffs_nand.h ++ fs/yaffs2/yportenv.h ++ fs/yaffs2/yaffs_packedtags2.h ++ fs/yaffs2/yaffs_attribs.h ++ fs/yaffs2/yaffs_ecc.h ++ fs/yaffs2/yaffs_trace.h ++ fs/yaffs2/yaffs_guts.h ++ fs/yaffs2/yaffs_getblockinfo.h ++ fs/yaffs2/yaffs_bitmap.h ++ fs/yaffs2/yaffs_nameval.h ++ fs/yaffs2/yaffscfg.h ++ fs/yaffs2/yaffs_nandemul2k.h ++ fs/yaffs2/yaffs_mtdif2.h ++ fs/yaffs2/yaffs_flashif2.h ++ fs/yaffs2/yaffs_checkptrw.h ++ fs/yaffs2/yaffs_tagscompat.h ++ fs/yaffs2/yaffs_nandif.h ++ fs/yaffs2/yaffs_summary.h ++ fs/yaffs2/yaffs_mtdif.h ++Copyright: Copyright (C) 2002-2011 Aleph One Ltd. ++License: LGPL-2.1 ++ ++Files: lib/sha1.c ++Copyright: Copyright (C) 2003-2006 Christophe Devine ++License: LGPL-2.1 ++ ++Files: include/bzlib.h ++ lib/bzip2/* ++Copyright: Copyright (C) 1996-2002 Julian R Seward. All rights reserved. ++License: bzlib-BSD-3 ++ ++Files: drivers/usb/musb-new/musb_host.h ++ drivers/usb/musb-new/musb_core.h ++ drivers/usb/musb-new/musb_core.c ++ drivers/usb/musb-new/musb_gadget.c ++ drivers/usb/musb-new/musb_gadget.h ++ drivers/usb/musb-new/musb_dma.h ++ drivers/usb/musb-new/musb_regs.h ++ drivers/usb/musb-new/musb_debug.h ++ drivers/usb/musb-new/musb_host.c ++ drivers/usb/musb-new/musb_gadget_ep0.c ++ drivers/usb/musb-new/musb_io.h ++Copyright: Copyright 2005 Mentor Graphics Corporation ++ Copyright (C) 2005-2006 by Texas Instruments ++ Copyright (C) 2006-2007 Nokia Corporation ++ Copyright (C) 2008-2009 MontaVista Software, Inc. ++License: GPL-2 ++ ++Files: net/dns.c ++ include/slre.h ++ lib/slre.c ++Copyright: 2008 Pieter Voorthuijsen ++ 2004-2005 Sergey Lyubka ++ 2009 Robin Getz ] ++License: Beerware ++ ++Files: include/libfdt.h ++ include/fdt.h ++Copyright: 2006 David Gibson, IBM Corporation ++ 2012 Kim Phillips, Freescale Semiconductor ++License: libfdt-BSD-GPL ++ ++Files: include/pcmcia/yenta.h ++Copyright: 1999 David A. Hinds. All Rights Reserved ++License: MPL-GPL ++ ++License: MPL-GPL ++ * The contents of this file are subject to the Mozilla Public License ++ * Version 1.1 (the "License"); you may not use this file except in ++ * compliance with the License. You may obtain a copy of the License ++ * at http://www.mozilla.org/MPL/ ++ * ++ * Software distributed under the License is distributed on an "AS IS" ++ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See ++ * the License for the specific language governing rights and ++ * limitations under the License. ++ * ++ * The initial developer of the original code is David A. Hinds ++ * . Portions created by David A. Hinds ++ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. ++ * ++ * Alternatively, the contents of this file may be used under the ++ * terms of the GNU General Public License version 2 (the "GPL"), in ++ * which case the provisions of the GPL are applicable instead of the ++ * above. If you wish to allow the use of your version of this file ++ * only under the terms of the GPL and not to allow others to use ++ * your version of this file under the MPL, indicate your decision by ++ * deleting the provisions above and replace them with the notice and ++ * other provisions required by the GPL. If you do not delete the ++ * provisions above, a recipient may use your version of this file ++ * under either the MPL or the GPL. ++ ++License: libfdt-BSD-GPL ++ * libfdt is dual licensed: you can use it either under the terms of ++ * the GPL, or the BSD license, at your option. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public ++ * License along with this library; if not, write to the Free ++ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, ++ * MA 02110-1301 USA ++ * ++ * Alternatively, ++ * ++ * b) Redistribution and use in source and binary forms, with or ++ * without modification, are permitted provided that the following ++ * conditions are met: ++ * ++ * 1. Redistributions of source code must retain the above ++ * copyright notice, this list of conditions and the following ++ * disclaimer. ++ * 2. Redistributions in binary form must reproduce the above ++ * copyright notice, this list of conditions and the following ++ * disclaimer in the documentation and/or other materials ++ * provided with the distribution. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND ++ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, ++ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ++ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR ++ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, ++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ ++License: Beerware ++ "THE BEER-WARE LICENSE" (Revision 42): ++ Sergey Lyubka wrote this file. As long as you retain this notice you ++ can do whatever you want with this stuff. If we meet some day, and you think ++ this stuff is worth it, you can buy me a beer in return. ++ ++License: GPL-2 ++ This program is free software; you can redistribute it and/or ++ modify it under the terms of the GNU General Public License ++ version 2 as published by the Free Software Foundation. ++ . ++ This program is distributed in the hope that it will be useful, but ++ WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ General Public License for more details. ++ . ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the Free Software ++ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA ++ 02110-1301 USA ++ . ++ On Debian systems, the full text of the GNU General Public ++ License version 2 can be found in the file ++ `/usr/share/common-licenses/GPL-2'. ++ ++License: bzlib-BSD-3 ++ Redistribution and use in source and binary forms, with or without ++ modification, are permitted provided that the following conditions ++ are met: ++ . ++ 1. Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ . ++ 2. The origin of this software must not be misrepresented; you must ++ not claim that you wrote the original software. If you use this ++ software in a product, an acknowledgment in the product ++ documentation would be appreciated but is not required. ++ . ++ 3. Altered source versions must be plainly marked as such, and must ++ not be misrepresented as being the original software. ++ . ++ 4. The name of the author may not be used to endorse or promote ++ products derived from this software without specific prior written ++ permission. ++ . ++ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS ++ OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY ++ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ++ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE ++ GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, ++ WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ ++License: GPL-2+ ++ This program is free software; you can redistribute it ++ and/or modify it under the terms of the GNU General Public ++ License as published by the Free Software Foundation; either ++ version 2 of the License, or (at your option) any later ++ version. ++ . ++ This program is distributed in the hope that it will be ++ useful, but WITHOUT ANY WARRANTY; without even the implied ++ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ++ PURPOSE. See the GNU General Public License for more ++ details. ++ . ++ You should have received a copy of the GNU General Public ++ License along with this package; if not, write to the Free ++ Software Foundation, Inc., 51 Franklin St, Fifth Floor, ++ Boston, MA 02110-1301 USA ++ . ++ On Debian systems, the full text of the GNU General Public ++ License version 2 can be found in the file ++ `/usr/share/common-licenses/GPL-2'. ++ ++License: LGPL-2.1 ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU Lesser General Public License version 2.1 as ++ published by the Free Software Foundation. ++ . ++ This library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ . ++ You should have received a copy of the GNU Lesser General Public ++ License along with this library; if not, write to the Free Software ++ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, ++ MA 02110-1301 USA ++ . ++ On Debian systems, the full text of the GNU General Public ++ License version 2 can be found in the file ++ `/usr/share/common-licenses/LGPL-2.1'. diff --cc debian/env-configs/efikamx.config index 000000000,000000000..1aedc9615 new file mode 100644 --- /dev/null +++ b/debian/env-configs/efikamx.config @@@ -1,0 -1,0 +1,9 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mtd1 0x00000 0x10000 0x01000 diff --cc debian/env-configs/guruplug.config index 000000000,000000000..8b30cbe33 new file mode 100644 --- /dev/null +++ b/debian/env-configs/guruplug.config @@@ -1,0 -1,0 +1,10 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# ++# Hardware : Marvell Plug2L Reference Board ++# No redundant environment ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mtd0 0x40000 0x20000 0x20000 diff --cc debian/env-configs/kurobox_pro.config index 000000000,000000000..83b6c6ac5 new file mode 100644 --- /dev/null +++ b/debian/env-configs/kurobox_pro.config @@@ -1,0 -1,0 +1,9 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mtd0 0x3F000 0x1000 0x1000 diff --cc debian/env-configs/linkstation-mini.config index 000000000,000000000..92ce9de2d new file mode 100644 --- /dev/null +++ b/debian/env-configs/linkstation-mini.config @@@ -1,0 -1,0 +1,7 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundand ++# environment sector is assumed present. ++ ++# for Buffalo Linkstation Mini ++# MTD device name Device offset Env. size Flash sector size ++/dev/mtd0 0x3f000 0x01000 0x01000 diff --cc debian/env-configs/linkstation_pro_live.config index 000000000,000000000..83b6c6ac5 new file mode 100644 --- /dev/null +++ b/debian/env-configs/linkstation_pro_live.config @@@ -1,0 -1,0 +1,9 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mtd0 0x3F000 0x1000 0x1000 diff --cc debian/env-configs/lsmipsel.config index 000000000,000000000..abd8bcb50 new file mode 100644 --- /dev/null +++ b/debian/env-configs/lsmipsel.config @@@ -1,0 -1,0 +1,9 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mtd0 0x30000 0x10000 0x10000 diff --cc debian/env-configs/lsppchg.config index 000000000,000000000..4ccc5769c new file mode 100644 --- /dev/null +++ b/debian/env-configs/lsppchg.config @@@ -1,0 -1,0 +1,9 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mtd4 0x360000 0x10000 0x10000 diff --cc debian/env-configs/mx6cuboxi.config index 000000000,000000000..a4bd77459 new file mode 100644 --- /dev/null +++ b/debian/env-configs/mx6cuboxi.config @@@ -1,0 -1,0 +1,9 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mmcblk0 0x80000 0x2000 diff --cc debian/env-configs/openmoko_gta01.config index 000000000,000000000..7fd45e398 new file mode 100644 --- /dev/null +++ b/debian/env-configs/openmoko_gta01.config @@@ -1,0 -1,0 +1,7 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# Notice, that the "Number of sectors" is ignored on NOR. ++ ++# MTD device name Device offset Env. size Flash sector size Number of sectors ++/dev/mtd1 0x0000 0x4000 0x4000 2 diff --cc debian/env-configs/openmoko_gta02.config index 000000000,000000000..1faa2f1f8 new file mode 100644 --- /dev/null +++ b/debian/env-configs/openmoko_gta02.config @@@ -1,0 -1,0 +1,7 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# Notice, that the "Number of sectors" is ignored on NOR. ++ ++# MTD device name Device offset Env. size Flash sector size Number of sectors ++/dev/mtd2 0x0000 0x40000 0x20000 2 diff --cc debian/env-configs/qnap_ts101.config index 000000000,000000000..181c54b8c new file mode 100644 --- /dev/null +++ b/debian/env-configs/qnap_ts101.config @@@ -1,0 -1,0 +1,9 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mtd5 0x00000 0x20000 0x20000 diff --cc debian/env-configs/qnap_ts109-209.config index 000000000,000000000..4024e080c new file mode 100644 --- /dev/null +++ b/debian/env-configs/qnap_ts109-209.config @@@ -1,0 -1,0 +1,9 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mtd4 0x0000 0x20000 0x20000 diff --cc debian/env-configs/qnap_ts119-219.config index 000000000,000000000..98505a933 new file mode 100644 --- /dev/null +++ b/debian/env-configs/qnap_ts119-219.config @@@ -1,0 -1,0 +1,11 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# ++# This config is for QNAP TS-119, TS-219 and TS-219P boards. ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mtd4 0x0000 0x1000 0x40000 diff --cc debian/env-configs/sheevaplug.config index 000000000,000000000..5bbd38d7f new file mode 100644 --- /dev/null +++ b/debian/env-configs/sheevaplug.config @@@ -1,0 -1,0 +1,9 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mtd0 0x60000 0x20000 0x20000 diff --cc debian/env-configs/udoo_quad.config index 000000000,000000000..9ffdf9f28 new file mode 100644 --- /dev/null +++ b/debian/env-configs/udoo_quad.config @@@ -1,0 -1,0 +1,9 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mmcblk0 0xC0000 0x2000 diff --cc debian/env-configs/wandboard.config index 000000000,000000000..1d5a97789 new file mode 100644 --- /dev/null +++ b/debian/env-configs/wandboard.config @@@ -1,0 -1,0 +1,9 @@@ ++# Configuration file for fw_(printenv/saveenv) utility. ++# Up to two entries are valid, in this case the redundant ++# environment sector is assumed present. ++# ++# XXX this configuration might miss a fifth parameter for the "Number of ++# sectors" ++ ++# MTD device name Device offset Env. size Flash sector size ++/dev/mmcblk0 0x60000 0x2000 diff --cc debian/manpages/fw_printenv.8 index 000000000,000000000..a288852bc new file mode 100644 --- /dev/null +++ b/debian/manpages/fw_printenv.8 @@@ -1,0 -1,0 +1,31 @@@ ++.\" Copyright © 2008 Per Andersson ++.\" This man page is covered by the GNU General Public License (GPLv2 or higher). ++.TH fw_printenv 8 "August 2008" "Debian Project" "" ++ ++.SH NAME ++fw_printenv \- Tool for printing environment for the bootloader U-Boot ++ ++.SH SYNOPSIS ++fw_printenv [ \fB\-n\fP \fIname\fP ] [ \fIname\fP \fI...\fP ] ++ ++.SH DESCRIPTION ++\fIfw_printenv\fP is a simple tool for printing the environment for the ++bootloader U-Boot. All environment variables matching the names given as ++arguments are shown. If \fIfw_printenv\fP is called without any arguments the ++entire environment is printed. ++ ++.SH OPTIONS ++.IP \fB\-n\fP ++If the \fBn\fP flag is set \fIfw_printenv\fP only prints the value of the supplied variable \fIname\fP. ++ ++.SH FILES ++.IP \fB/etc/fw_env.config\fP ++Configuration file for fw_printenv. ++ ++.SH SEE ALSO ++fw_setenv(8) ++ ++.SH AUTHOR ++Wolfgang Denk ++.PP ++This manual page was written by Per Andersson diff --cc debian/manpages/fw_setenv.8 index 000000000,000000000..5a5114ab1 new file mode 100644 --- /dev/null +++ b/debian/manpages/fw_setenv.8 @@@ -1,0 -1,0 +1,27 @@@ ++.\" Copyright © 2008 Per Andersson ++.\" This man page is covered by the GNU General Public License (GPLv2 or higher). ++.TH fw_setenv 8 "August 2008" "Debian Project" "" ++ ++.SH NAME ++fw_setenv \- Tool for modifying the environment for the bootloader U\-Boot ++ ++.SH SYNOPSIS ++fw_setenv \fIname\fP [ \fIvalue\fP ] ++ ++.SH DESCRIPTION ++\fIfw_setenv\fP is a simple tool for modifying either the environment for the ++bootloader U-Boot. If the variable already is set in the environment it is ++updated, otherwise it is created and set. If only one argument is given, ++variable name, the corresponding variable is deleted. ++ ++.SH FILES ++.IP \fB/etc/fw_env.config\fP ++Configuration file for fw_setenv. ++ ++.SH SEE ALSO ++fw_printenv(8) ++ ++.SH AUTHOR ++Wolfgang Denk ++.PP ++This manual page was written by Per Andersson diff --cc debian/patches/ARM-OMAP3-Revamp-IGEP-default-configuration.diff index 000000000,000000000..6cd7624db new file mode 100644 --- /dev/null +++ b/debian/patches/ARM-OMAP3-Revamp-IGEP-default-configuration.diff @@@ -1,0 -1,0 +1,89 @@@ ++From ebdb222b0d65bcc050e3f0fd6e97faf17fb3eae4 Mon Sep 17 00:00:00 2001 ++Sender: Loïc Minier ++From: Enric Balletbo i Serra ++Date: Wed, 23 Feb 2011 14:35:41 +0100 ++Subject: [PATCH] ARM: OMAP3: Revamp IGEP default configuration ++MIME-Version: 1.0 ++Content-Type: text/plain; charset=UTF-8 ++Content-Transfer-Encoding: 8bit ++ ++The default IGEP configuration doesn't do anything useful; using some ++boot.scr search logic like BeagleBoard is much more useful. ++ ++Signed-off-by: Loïc Minier ++--- ++ include/configs/igep0020.h | 55 ++++++++++++++++++++++++++++++++++++++++--- ++ 1 files changed, 51 insertions(+), 4 deletions(-) ++ ++diff --git a/include/configs/igep0020.h b/include/configs/igep0020.h ++index c19ecc0..2466562 100644 ++--- a/include/configs/igep0020.h +++++ b/include/configs/igep0020.h ++@@ -130,13 +130,60 @@ ++ #define CONFIG_TWL4030_POWER 1 ++ ++ /* Environment information */ ++-#define CONFIG_BOOTCOMMAND \ ++- "mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0" ++- ++ #define CONFIG_BOOTDELAY 3 ++ ++ #define CONFIG_EXTRA_ENV_SETTINGS \ ++- "usbtty=cdc_acm\0" +++ "loadaddr=0x82000000\0" \ +++ "usbtty=cdc_acm\0" \ +++ "console=ttyS2,115200n8\0" \ +++ "mpurate=500\0" \ +++ "vram=12M\0" \ +++ "dvimode=1024x768MR-16@60\0" \ +++ "defaultdisplay=dvi\0" \ +++ "mmcdev=0\0" \ +++ "mmcroot=/dev/mmcblk0p2 rw\0" \ +++ "mmcrootfstype=ext3 rootwait\0" \ +++ "nandroot=/dev/mtdblock4 rw\0" \ +++ "nandrootfstype=jffs2\0" \ +++ "mmcargs=setenv bootargs console=${console} " \ +++ "mpurate=${mpurate} " \ +++ "vram=${vram} " \ +++ "omapfb.mode=dvi:${dvimode} " \ +++ "omapfb.debug=y " \ +++ "omapdss.def_disp=${defaultdisplay} " \ +++ "root=${mmcroot} " \ +++ "rootfstype=${mmcrootfstype}\0" \ +++ "nandargs=setenv bootargs console=${console} " \ +++ "mpurate=${mpurate} " \ +++ "vram=${vram} " \ +++ "omapfb.mode=dvi:${dvimode} " \ +++ "omapfb.debug=y " \ +++ "omapdss.def_disp=${defaultdisplay} " \ +++ "root=${nandroot} " \ +++ "rootfstype=${nandrootfstype}\0" \ +++ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ +++ "bootscript=echo Running bootscript from mmc ...; " \ +++ "source ${loadaddr}\0" \ +++ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ +++ "mmcboot=echo Booting from mmc ...; " \ +++ "run mmcargs; " \ +++ "bootm ${loadaddr}\0" \ +++ "nandboot=echo Booting from nand ...; " \ +++ "run nandargs; " \ +++ "nand read ${loadaddr} 280000 400000; " \ +++ "bootm ${loadaddr}\0" \ +++ +++#define CONFIG_BOOTCOMMAND \ +++ "if mmc rescan ${mmcdev}; then " \ +++ "if run loadbootscript; then " \ +++ "run bootscript; " \ +++ "else " \ +++ "if run loaduimage; then " \ +++ "run mmcboot; " \ +++ "else run nandboot; " \ +++ "fi; " \ +++ "fi; " \ +++ "else run nandboot; fi" ++ ++ #define CONFIG_AUTO_COMPLETE 1 ++ ++-- ++1.7.2.3 ++ diff --cc debian/patches/Makefile-add-kwb-target-to-all.patch index 000000000,000000000..66676495a new file mode 100644 --- /dev/null +++ b/debian/patches/Makefile-add-kwb-target-to-all.patch @@@ -1,0 -1,0 +1,12 @@@ ++Add u-boot.kwb to "make all" target on Kirkwood. ++ ++--- a/Makefile +++++ b/Makefile ++@@ -736,6 +736,7 @@ ++ ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin ++ ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img ++ ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin +++ALL-$(CONFIG_KIRKWOOD) += u-boot.kwb ++ ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin ++ ifeq ($(CONFIG_SPL_FRAMEWORK),y) ++ ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img diff --cc debian/patches/add-debian-revision-to-u-boot-version index 000000000,000000000..8e6bccdb0 new file mode 100644 --- /dev/null +++ b/debian/patches/add-debian-revision-to-u-boot-version @@@ -1,0 -1,0 +1,16 @@@ ++Add the debian revision to the U-boot version, which is displayed at ++boot and can be helpful to determine which specific version is used. ++ ++Index: u-boot/Makefile ++=================================================================== ++--- u-boot.orig/Makefile +++++ u-boot/Makefile ++@@ -350,7 +350,7 @@ KBUILD_AFLAGS := -D__ASSEMBLY__ ++ ++ # Read UBOOTRELEASE from include/config/uboot.release (if it exists) ++ UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null) ++-UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) +++UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)$(DEBIAN_REVISION) ++ ++ export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION ++ export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR diff --cc debian/patches/arndale/board-spl-rule.diff index 000000000,000000000..2d7a204d0 new file mode 100644 --- /dev/null +++ b/debian/patches/arndale/board-spl-rule.diff @@@ -1,0 -1,0 +1,17 @@@ ++Description: Add spl/arndale-spl.bin rule ++Author: Ian Campbell ++ ++Index: u-boot/Makefile ++=================================================================== ++--- u-boot.orig/Makefile +++++ u-boot/Makefile ++@@ -1311,6 +1311,9 @@ spl/sunxi-spl.bin: spl/u-boot-spl ++ spl/u-boot-spl-dtb.sfp: spl/u-boot-spl ++ @: ++ +++spl/arndale-spl.bin: spl/u-boot-spl +++ @: +++ ++ tpl/u-boot-tpl.bin: tools prepare ++ $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all ++ diff --cc debian/patches/beagleboneblack/usb-mass-storage.patch index 000000000,000000000..8f3219fd5 new file mode 100644 --- /dev/null +++ b/debian/patches/beagleboneblack/usb-mass-storage.patch @@@ -1,0 -1,0 +1,16 @@@ ++Index: u-boot/include/configs/am335x_evm.h ++=================================================================== ++--- u-boot.orig/include/configs/am335x_evm.h +++++ u-boot/include/configs/am335x_evm.h ++@@ -326,9 +326,8 @@ ++ #endif ++ ++ #ifdef CONFIG_USB_MUSB_GADGET ++-#define CONFIG_USB_ETHER ++-#define CONFIG_USB_ETH_RNDIS ++-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" +++#define CONFIG_CMD_USB_MASS_STORAGE +++#define CONFIG_USB_FUNCTION_MASS_STORAGE ++ ++ /* USB TI's IDs */ ++ #define CONFIG_G_DNL_VENDOR_NUM 0x0451 diff --cc debian/patches/ensure-config-sandbox-for-make-env.patch index 000000000,000000000..5d2937ed0 new file mode 100644 --- /dev/null +++ b/debian/patches/ensure-config-sandbox-for-make-env.patch @@@ -1,0 -1,0 +1,18 @@@ ++Ensure that CONFIG_SANDBOX is set when running "make env", avoiding a ++failure to build caused by config_distro_bootcmd.h following the wrong ++codepath... ++ ++Index: u-boot/include/configs/sandbox.h ++=================================================================== ++--- u-boot.orig/include/configs/sandbox.h +++++ u-boot/include/configs/sandbox.h ++@@ -127,6 +127,9 @@ ++ ++ #define CONFIG_BOOTCOMMAND "" ++ +++#ifndef CONFIG_SANDBOX +++#define CONFIG_SANDBOX 1 +++#endif ++ #include ++ ++ #define CONFIG_KEEP_SERVERADDR diff --cc debian/patches/hurd.diff index 000000000,000000000..546e5fbb2 new file mode 100644 --- /dev/null +++ b/debian/patches/hurd.diff @@@ -1,0 -1,0 +1,20 @@@ ++--- a/include/compiler.h +++++ b/include/compiler.h ++@@ -15,7 +15,7 @@ ++ defined(__sun__) || \ ++ defined(__APPLE__) ++ # include ++-#elif defined(__linux__) || defined(__WIN32__) || defined(__MINGW32__) +++#elif defined(__linux__) || defined(__WIN32__) || defined(__MINGW32__) || defined(__GLIBC__) ++ # include ++ #endif ++ ++@@ -41,7 +41,7 @@ ++ #define O_BINARY 0 ++ #endif ++ ++-#ifdef __linux__ +++#if defined(__linux__) || defined(__GLIBC__) ++ # include ++ # include ++ #elif defined(__MACH__) || defined(__FreeBSD__) diff --cc debian/patches/mipsel-native-endianness.diff index 000000000,000000000..48fbc894a new file mode 100644 --- /dev/null +++ b/debian/patches/mipsel-native-endianness.diff @@@ -1,0 -1,0 +1,54 @@@ ++[MIPS] Fix little-endian build with non-ELDK toolchains ++ ++We've been in trouble for a long time when cross compiling with non-ELDK ++toolchains. This is caused by -EB passed to CPPFLAGS incorrectly, by the ++lack of an endian specifier to LDFLAGS, and by wrong OUTPUT_FORMATs. ++ ++We're going to implement two workarounds. One is the endianness specifier ++bugfix not to pass -EB / -EL to CPPFLAGS unless ELDK toolchain is used. ++Note that ELDK and non-ELDK toolchains know their default endianness, so ++the endianness specifier may not be necessary in principle. ++ ++The other is removal of OUTPUT_FORMAT in *.lds files. If we have this, ++it doesn't work unless an endianness specifier is added to LDFLAGS. As ++we haven't added that to LDFLAGS so far, it must have not worked properly, ++except ELDK; I don't know why and how ELDK works, though. ++ ++With these two changes, all objects will be generated and linked in the ++toolchain's default endianness. Then MAKEALL mips_el will work even with ++non-ELDK toolchain. ++ ++Note that Linux/MIPS kernel has CONFIG_CPU_BIG_ENDIAN and ++CONFIG_CPU_LITTLE_ENDIAN alternatives to allow users to compile kernels ++with a toolchain for the other endianness. But U-Boot does not have such ++feature for now, and it's another story. ++ ++Signed-off-by: Shinya Kuribayashi ++--- ++ board/dbau1x00/u-boot.lds | 4 ---- ++ board/gth2/u-boot.lds | 4 ---- ++ board/incaip/u-boot.lds | 4 ---- ++ board/pb1x00/u-boot.lds | 4 ---- ++ board/purple/u-boot.lds | 4 ---- ++ board/qemu-mips/u-boot.lds | 4 ---- ++ board/tb0229/u-boot.lds | 2 -- ++ cpu/mips/config.mk | 8 -------- ++ examples/mips.lds | 4 ---- ++ mips_config.mk | 26 ++++++++++++++++++++++++++ ++ 10 files changed, 26 insertions(+), 38 deletions(-) ++ ++Index: u-boot/examples/standalone/mips.lds ++=================================================================== ++--- u-boot.orig/examples/standalone/mips.lds +++++ u-boot/examples/standalone/mips.lds ++@@ -5,10 +5,6 @@ ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++-/* ++-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips") ++-*/ ++-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips") ++ OUTPUT_ARCH(mips) ++ SECTIONS ++ { diff --cc debian/patches/mksunxiboot-spl.patch index 000000000,000000000..49d443e3b new file mode 100644 --- /dev/null +++ b/debian/patches/mksunxiboot-spl.patch @@@ -1,0 -1,0 +1,14 @@@ ++Use a relative path to include the sunxi spl header, which allows ++mksunxiboot to build on any arch. ++ ++--- a/tools/mksunxiboot.c +++++ b/tools/mksunxiboot.c ++@@ -15,7 +15,7 @@ ++ #include ++ #include ++ #include ++-#include "asm/arch/spl.h" +++#include "../arch/arm/include/asm/arch-sunxi/spl.h" ++ ++ #define STAMP_VALUE 0x5F0A6C39 ++ diff --cc debian/patches/mx53loco index 000000000,000000000..7aa1b7c4c new file mode 100644 --- /dev/null +++ b/debian/patches/mx53loco @@@ -1,0 -1,0 +1,14 @@@ ++Enables support for ext4, the "load" command, and using bootz with raw initrds. ++ ++Index: u-boot/include/configs/mx53loco.h ++=================================================================== ++--- u-boot.orig/include/configs/mx53loco.h +++++ u-boot/include/configs/mx53loco.h ++@@ -46,6 +46,7 @@ ++ #define CONFIG_CMD_FS_GENERIC ++ #define CONFIG_CMD_FAT ++ #define CONFIG_CMD_EXT2 +++#define CONFIG_CMD_EXT4 ++ #define CONFIG_DOS_PARTITION ++ ++ /* Eth Configs */ diff --cc debian/patches/mx6cuboxi/serial_console_speed.patch index 000000000,000000000..b482a2272 new file mode 100644 --- /dev/null +++ b/debian/patches/mx6cuboxi/serial_console_speed.patch @@@ -1,0 -1,0 +1,13 @@@ ++Index: u-boot/include/configs/mx6cuboxi.h ++=================================================================== ++--- u-boot.orig/include/configs/mx6cuboxi.h +++++ u-boot/include/configs/mx6cuboxi.h ++@@ -99,7 +99,7 @@ ++ "initrd_high=0xffffffff\0" \ ++ "fdt_high=0xffffffff\0" \ ++ "ip_dyn=yes\0" \ ++- "console=" CONFIG_CONSOLE_DEV "\0" \ +++ "console=" CONFIG_CONSOLE_DEV ",115200\0" \ ++ "bootm_size=0x10000000\0" \ ++ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ ++ "update_sd_firmware=" \ diff --cc debian/patches/n900-bootz-raw-initrd.diff index 000000000,000000000..eb7dda5ed new file mode 100644 --- /dev/null +++ b/debian/patches/n900-bootz-raw-initrd.diff @@@ -1,0 -1,0 +1,17 @@@ ++Enable booting of zImage/vmlinuz and initrd without requiring the use of ++mkimage to create uImage/uInitrd. ++ ++Index: u-boot/include/configs/nokia_rx51.h ++=================================================================== ++--- u-boot.orig/include/configs/nokia_rx51.h 2014-05-13 15:05:59.000000000 -0700 +++++ u-boot/include/configs/nokia_rx51.h 2014-05-13 15:07:43.213088875 -0700 ++@@ -136,6 +136,9 @@ ++ #define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */ ++ #define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */ ++ +++#define CONFIG_CMD_BOOTZ /* boot zImage */ +++#define CONFIG_SUPPORT_RAW_INITRD +++ ++ #ifdef ONENAND_SUPPORT ++ ++ #define CONFIG_CMD_ONENAND /* ONENAND support */ diff --cc debian/patches/no-force-CROSS_COMPILE-powerpc.diff index 000000000,000000000..f4ec66e82 new file mode 100644 --- /dev/null +++ b/debian/patches/no-force-CROSS_COMPILE-powerpc.diff @@@ -1,0 -1,0 +1,15 @@@ ++Index: u-boot/arch/powerpc/config.mk ++=================================================================== ++--- u-boot.orig/arch/powerpc/config.mk +++++ u-boot/arch/powerpc/config.mk ++@@ -5,10 +5,6 @@ ++ # SPDX-License-Identifier: GPL-2.0+ ++ # ++ ++-ifeq ($(CROSS_COMPILE),) ++-CROSS_COMPILE := ppc_8xx- ++-endif ++- ++ CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000 ++ LDFLAGS_FINAL += --gc-sections ++ LDFLAGS_FINAL += --bss-plt diff --cc debian/patches/novena/0001-arm-novena-Switch-novena-to-config_distro_bootcmd.patch index 000000000,000000000..6ee5dd459 new file mode 100644 --- /dev/null +++ b/debian/patches/novena/0001-arm-novena-Switch-novena-to-config_distro_bootcmd.patch @@@ -1,0 -1,0 +1,79 @@@ ++Forwarded: https://patchwork.ozlabs.org/patch/548343/ ++From: Marek Vasut ++From: Vagrant Cascadian ++Description: Switch Novena to distro bootcmd ++ ++Signed-off-by: Vagrant Cascadian ++Signed-off-by: Marek Vasut ++Cc: Sean Cross ++Cc: Stefano Babic ++--- ++ include/configs/novena.h | 23 ++++++++++++++++++++++- ++ 1 file changed, 22 insertions(+), 1 deletion(-) ++ ++V2: Add fdtfile to specify the device tree blob. ++ Fix fdt_addr_r to point past kernel address. ++ ++Index: u-boot/include/configs/novena.h ++=================================================================== ++--- u-boot.orig/include/configs/novena.h +++++ u-boot/include/configs/novena.h ++@@ -16,6 +16,7 @@ ++ #define CONFIG_FIT ++ #define CONFIG_KEYBOARD ++ +++#include ++ #include "mx6_common.h" ++ ++ /* U-Boot Commands */ ++@@ -58,7 +59,7 @@ ++ /* Booting Linux */ ++ #define CONFIG_BOOTFILE "fitImage" ++ #define CONFIG_BOOTARGS "console=ttymxc1,115200 " ++-#define CONFIG_BOOTCOMMAND "run net_nfs" +++#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run net_nfs" ++ #define CONFIG_HOSTNAME novena ++ ++ /* Physical Memory Map */ ++@@ -189,6 +190,7 @@ ++ #endif ++ ++ /* Extra U-Boot environment. */ +++#ifndef CONFIG_SPL_BUILD ++ #define CONFIG_EXTRA_ENV_SETTINGS \ ++ "fdt_high=0xffffffff\0" \ ++ "initrd_high=0xffffffff\0" \ ++@@ -197,7 +199,12 @@ ++ "bootdev=/dev/mmcblk0p1\0" \ ++ "rootdev=/dev/mmcblk0p2\0" \ ++ "netdev=eth0\0" \ ++- "kernel_addr_r=0x18000000\0" \ +++ "kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0" \ +++ "pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0" \ +++ "scriptaddr="__stringify(CONFIG_LOADADDR)"\0" \ +++ "ramdisk_addr_r=0x28000000\0" \ +++ "fdt_addr_r=0x18000000\0" \ +++ "fdtfile=imx6q-novena.dtb\0" \ ++ "addcons=" \ ++ "setenv bootargs ${bootargs} " \ ++ "console=${consdev},${baudrate}\0" \ ++@@ -241,5 +248,19 @@ ++ "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\ ++ "fi ; " \ ++ "fi\0" \ +++ BOOTENV +++ +++#define BOOT_TARGET_DEVICES(func) \ +++ func(MMC, mmc, 0) \ +++ func(USB, usb, 0) \ +++ func(SATA, sata, 0) \ +++ func(PXE, pxe, na) \ +++ func(DHCP, dhcp, na) +++ +++#include +++ +++#else +++#define CONFIG_EXTRA_ENV_SETTINGS +++#endif /* CONFIG_SPL_BUILD */ ++ ++ #endif /* __CONFIG_H */ diff --cc debian/patches/series index 000000000,000000000..f73a5eacb new file mode 100644 --- /dev/null +++ b/debian/patches/series @@@ -1,0 -1,0 +1,44 @@@ ++add-debian-revision-to-u-boot-version ++mipsel-native-endianness.diff ++no-force-CROSS_COMPILE-powerpc.diff ++tools-generic-builds.patch ++tools-only-in-no-dot-config-targets.diff ++Makefile-add-kwb-target-to-all.patch ++hurd.diff ++ ++udoo/udoo_quad-support.patch ++udoo/udoo-standardized-variables ++ ++mx53loco ++ ++n900-bootz-raw-initrd.diff ++ ++beagleboneblack/usb-mass-storage.patch ++ ++arndale/board-spl-rule.diff ++ ++sh4-fix-linker-name-prefix.patch ++ ++ensure-config-sandbox-for-make-env.patch ++mksunxiboot-spl.patch ++ ++upstream/image.c-Fix-non-Android-booting-with-ramdisk-and-or-.patch ++ ++upstream/distro-bootcmd-imx/0001-arm-imx-Switch-Wandboard-to-use-config_distro_bootcm.patch ++upstream/distro-bootcmd-imx/0002-arm-imx-Switch-mx6cuboxi-to-use-config_distro_bootcm.patch ++upstream/distro-bootcmd-imx/0003-imx6-fix-warnings-due-to-switch-to-distro-environmen.patch ++ ++mx6cuboxi/serial_console_speed.patch ++ ++upstream/am33x_distro_bootcmd/0001-config_distro_bootcmd.h-Use-a-private-variable-for-b.patch ++upstream/am33x_distro_bootcmd/0002-configs-ti_armv7_common.h-Add-default-addresses-for-.patch ++upstream/am33x_distro_bootcmd/0003-configs-am335x_evm-Support-distro-bootcmds.patch ++ ++novena/0001-arm-novena-Switch-novena-to-config_distro_bootcmd.patch ++upstream/novena/0001-arm-imx6-novena-gw_ventana-Fix-use-of-pfuze100-bit-d.patch ++upstream/novena/0002-arm-imx6-novena-Enable-extfs-support-in-SPL.patch ++ ++upstream/lamobo-r1/0001-sunxi-Add-support-for-the-Lamobo-R1-board.patch ++ ++upstream/mkimage-fix-multi-script/0001-mkimage-Fix-generating-multi-and-script-images.patch ++upstream/mkimage-fix-multi-script/0002-mkimage-Fix-warning-from-fix-for-generating-multi-an.patch diff --cc debian/patches/sh4-fix-linker-name-prefix.patch index 000000000,000000000..943db2466 new file mode 100644 --- /dev/null +++ b/debian/patches/sh4-fix-linker-name-prefix.patch @@@ -1,0 -1,0 +1,30 @@@ ++Description: sh4-fix-linker-name-prefix.patch ++ u-boot currently fails to build from source on sh4 since the ++ linker name prefix defined in arch/sh/config.mk is outdated. ++ On current Debian installations, the binaries of the GNU ++ toolchain are named using the triplett scheme ++ $arch-$kernel-$toolchain. Thus, on sh4, the proper name ++ is "sh4-linux-gnu-ld" instead of "sh4-linux-ld". This ++ patch updates build configuration on sh4 to reflect that. ++ ++--- ++ ++Origin: Debian ++Bug: (none yet) ++Bug-Debian: https://bugs.debian.org/771747 ++Bug-Ubuntu: (none) ++Forwarded: (not yet) ++Reviewed-By: John Paul Adrian Glaubitz ++Last-Update: 2014-12-10 ++ ++--- u-boot-2014.10+dfsg1.orig/arch/sh/config.mk +++++ u-boot-2014.10+dfsg1/arch/sh/config.mk ++@@ -6,7 +6,7 @@ ++ # ++ ++ ifeq ($(CROSS_COMPILE),) ++-CROSS_COMPILE := sh4-linux- +++CROSS_COMPILE := sh4-linux-gnu- ++ endif ++ ++ CONFIG_STANDALONE_LOAD_ADDR ?= 0x8C000000 diff --cc debian/patches/tools-generic-builds.patch index 000000000,000000000..e7f9bf9f3 new file mode 100644 --- /dev/null +++ b/debian/patches/tools-generic-builds.patch @@@ -1,0 -1,0 +1,14 @@@ ++Description: Enable generic tools build ++Author: Hector Oron ++ ++--- u-boot-2014.10~rc2+dfsg1.orig/tools/Makefile +++++ u-boot-2014.10~rc2+dfsg1/tools/Makefile ++@@ -52,7 +52,7 @@ HOSTCFLAGS_xway-swap-bytes.o := -pedanti ++ hostprogs-y += mkenvimage ++ mkenvimage-objs := mkenvimage.o os_support.o lib/crc32.o ++ ++-hostprogs-y += dumpimage mkimage +++hostprogs-y += dumpimage mkimage mksunxiboot kwboot ++ hostprogs-$(CONFIG_FIT_SIGNATURE) += fit_info fit_check_sign ++ ++ FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := common/image-sig.o diff --cc debian/patches/tools-only-in-no-dot-config-targets.diff index 000000000,000000000..044fafb75 new file mode 100644 --- /dev/null +++ b/debian/patches/tools-only-in-no-dot-config-targets.diff @@@ -1,0 -1,0 +1,21 @@@ ++Revert upstream commit c7ad5cbb1ef2c33883f0fa7d0455095004fd306d: ++ ++ Makefile: drop "tools-only" from no-dot-config-targets ++ ++This indirectly pulls in a build-dependency on libssl-dev used for FIT ++image support, and possibly GPL/OpenSSL licensing incompatibility ++issues. ++ ++Index: u-boot/Makefile ++=================================================================== ++--- u-boot.orig/Makefile +++++ u-boot/Makefile ++@@ -411,7 +411,7 @@ timestamp_h := include/generated/timesta ++ ++ no-dot-config-targets := clean clobber mrproper distclean \ ++ help %docs check% coccicheck \ ++- ubootversion backup +++ ubootversion backup tools-only ++ ++ config-targets := 0 ++ mixed-targets := 0 diff --cc debian/patches/udoo/udoo-standardized-variables index 000000000,000000000..6947254e9 new file mode 100644 --- /dev/null +++ b/debian/patches/udoo/udoo-standardized-variables @@@ -1,0 -1,0 +1,28 @@@ ++Adds standardized variables, fdtfile, fdt_addr_r, ramdisk_addr_r and ++kernel_addr_r. ++ ++Index: u-boot/include/configs/udoo.h ++=================================================================== ++--- u-boot.orig/include/configs/udoo.h +++++ u-boot/include/configs/udoo.h ++@@ -74,6 +74,9 @@ ++ "initrd_high=0xffffffff\0" \ ++ "fdt_file=undefined\0" \ ++ "fdt_addr=0x18000000\0" \ +++ "fdt_addr_r=0x18000000\0" \ +++ "ramdisk_addr_r=0x13000000\0" \ +++ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ ++ "boot_fdt=try\0" \ ++ "ip_dyn=yes\0" \ ++ "mmcdev=0\0" \ ++@@ -146,8 +149,10 @@ ++ "fi;\0" \ ++ "findfdt=" \ ++ "if test $board_rev = MX6Q ; then " \ +++ "setenv fdtfile imx6q-udoo.dtb; " \ ++ "setenv fdt_file imx6q-udoo.dtb; fi; " \ ++ "if test $board_rev = MX6DL ; then " \ +++ "setenv fdt_file imx6dl-udoo.dtb; " \ ++ "setenv fdt_file imx6dl-udoo.dtb; fi; " \ ++ "if test $fdt_file = undefined; then " \ ++ "echo WARNING: Could not determine dtb to use; fi; \0" diff --cc debian/patches/udoo/udoo_quad-support.patch index 000000000,000000000..566b806be new file mode 100644 --- /dev/null +++ b/debian/patches/udoo/udoo_quad-support.patch @@@ -1,0 -1,0 +1,82 @@@ ++Description: Features and sane scripts for UDOO board ++ Enable the following features: ++ * Ext4 ++ * Generic FS (load) ++ * Raw initramfs ++ Tweak scripts to: ++ * use generic "load" command to load files from FS. ++ * provide "loadzimage" macro. ++ * account for different locations of boot script file. ++Author: Michael Fladischer ++Last-Update: 2014-07-01 ++Forwarded: no ++ ++Index: u-boot/include/configs/udoo.h ++=================================================================== ++--- u-boot.orig/include/configs/udoo.h +++++ u-boot/include/configs/udoo.h ++@@ -95,12 +95,16 @@ ++ "fi\0" \ ++ "mmcargs=setenv bootargs console=${console},${baudrate} " \ ++ "root=${mmcroot}\0" \ +++ "loadbootenv=load mmc ${mmcdev}:${mmcpart} ${loadaddr} uEnv.txt\0" \ +++ "importbootenv=echo Importing environment from mmc (uEnv.txt)...; " \ +++ "env import -t $loadaddr $filesize\0" \ ++ "loadbootscript=" \ ++- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ +++ "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ ++ "bootscript=echo Running bootscript from mmc ...; " \ ++ "source\0" \ ++- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ ++- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ +++ "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ +++ "loadzimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage\0" \ +++ "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ ++ "mmcboot=echo Booting from mmc ...; " \ ++ "run mmcargs; " \ ++ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ ++@@ -149,17 +153,33 @@ ++ "echo WARNING: Could not determine dtb to use; fi; \0" ++ ++ #define CONFIG_BOOTCOMMAND \ ++- "run findfdt; " \ ++- "mmc dev ${mmcdev}; if mmc rescan; then " \ ++- "if run loadbootscript; then " \ ++- "run bootscript; " \ ++- "else " \ ++- "if run loadimage; then " \ ++- "run mmcboot; " \ ++- "else run netboot; " \ ++- "fi; " \ ++- "fi; " \ ++- "else run netboot; fi" +++ "run findfdt; " \ +++ "mmc dev ${mmcdev};" \ +++ "if mmc rescan; then " \ +++ "echo SD/MMC found on device ${mmcdev};" \ +++ "if run loadbootenv; then " \ +++ "run importbootenv;" \ +++ "fi;" \ +++ "echo Checking if uenvcmd is set ...;" \ +++ "if test -n $uenvcmd; then " \ +++ "echo Running uenvcmd ...;" \ +++ "run uenvcmd;" \ +++ "fi;" \ +++ "if run loadbootscript; then " \ +++ "echo Running boot script ${script} ...;" \ +++ "run bootscript; " \ +++ "fi;" \ +++ "setenv script /boot/${script};" \ +++ "if run loadbootscript; then " \ +++ "echo Running boot script ${script} ...;" \ +++ "run bootscript; " \ +++ "fi;" \ +++ "echo Running default loadzimage ...;" \ +++ "if run loadzimage; then " \ +++ "run loadfdt;" \ +++ "run mmcboot;" \ +++ "fi;" \ +++ "fi;" ++ ++ /* Print Buffer Size */ ++ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) diff --cc debian/patches/upstream/am33x_distro_bootcmd/0001-config_distro_bootcmd.h-Use-a-private-variable-for-b.patch index 000000000,000000000..54c202e32 new file mode 100644 --- /dev/null +++ b/debian/patches/upstream/am33x_distro_bootcmd/0001-config_distro_bootcmd.h-Use-a-private-variable-for-b.patch @@@ -1,0 -1,0 +1,82 @@@ ++From 59d03cb37700e2e204451e83b38c326df0435ff8 Mon Sep 17 00:00:00 2001 ++From: Sjoerd Simons ++Date: Fri, 28 Aug 2015 15:01:54 +0200 ++Subject: [PATCH 1/3] config_distro_bootcmd.h: Use a private variable for ++ bootpart ++ ++Hush has an oddity where using ${var} causes var to resolved in the the global ++address space (iotw the environment) first and only afterwards will the local ++variable space be searched. ++ ++This causes odd side-effects when iterating over the boot partitions ++using ${bootpart} if the environment also has a bootpart variable (e.g. for ++the various TI boards). Fix this by using the hopefully more unique ++${distro_bootpart} instead of ${bootpart}. ++ ++Signed-off-by: Sjoerd Simons ++Acked-by: Stephen Warren ++--- ++ include/config_distro_bootcmd.h | 18 +++++++++++------- ++ 1 file changed, 11 insertions(+), 7 deletions(-) ++ ++diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h ++index 3a360ca4..d2f49a1 100644 ++--- a/include/config_distro_bootcmd.h +++++ b/include/config_distro_bootcmd.h ++@@ -191,11 +191,12 @@ ++ BOOTENV_BOOT_TARGETS \ ++ \ ++ "boot_extlinux=" \ ++- "sysboot ${devtype} ${devnum}:${bootpart} any " \ +++ "sysboot ${devtype} ${devnum}:${distro_bootpart} any " \ ++ "${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \ ++ \ ++ "scan_dev_for_extlinux=" \ ++- "if test -e ${devtype} ${devnum}:${bootpart} " \ +++ "if test -e ${devtype} " \ +++ "${devnum}:${distro_bootpart} " \ ++ "${prefix}extlinux/extlinux.conf; then " \ ++ "echo Found ${prefix}extlinux/extlinux.conf; " \ ++ "run boot_extlinux; " \ ++@@ -203,13 +204,14 @@ ++ "fi\0" \ ++ \ ++ "boot_a_script=" \ ++- "load ${devtype} ${devnum}:${bootpart} " \ +++ "load ${devtype} ${devnum}:${distro_bootpart} " \ ++ "${scriptaddr} ${prefix}${script}; " \ ++ "source ${scriptaddr}\0" \ ++ \ ++ "scan_dev_for_scripts=" \ ++ "for script in ${boot_scripts}; do " \ ++- "if test -e ${devtype} ${devnum}:${bootpart} " \ +++ "if test -e ${devtype} " \ +++ "${devnum}:${distro_bootpart} " \ ++ "${prefix}${script}; then " \ ++ "echo Found U-Boot script " \ ++ "${prefix}${script}; " \ ++@@ -219,7 +221,8 @@ ++ "done\0" \ ++ \ ++ "scan_dev_for_boot=" \ ++- "echo Scanning ${devtype} ${devnum}:${bootpart}...; " \ +++ "echo Scanning ${devtype} " \ +++ "${devnum}:${distro_bootpart}...; " \ ++ "for prefix in ${boot_prefixes}; do " \ ++ "run scan_dev_for_extlinux; " \ ++ "run scan_dev_for_scripts; " \ ++@@ -228,8 +231,9 @@ ++ "scan_dev_for_boot_part=" \ ++ "part list ${devtype} ${devnum} -bootable devplist; " \ ++ "env exists devplist || setenv devplist 1; " \ ++- "for bootpart in ${devplist}; do " \ ++- "if fstype ${devtype} ${devnum}:${bootpart} " \ +++ "for distro_bootpart in ${devplist}; do " \ +++ "if fstype ${devtype} " \ +++ "${devnum}:${distro_bootpart} " \ ++ "bootfstype; then " \ ++ "run scan_dev_for_boot; " \ ++ "fi; " \ ++-- ++2.1.4 ++ diff --cc debian/patches/upstream/am33x_distro_bootcmd/0002-configs-ti_armv7_common.h-Add-default-addresses-for-.patch index 000000000,000000000..95ef105bd new file mode 100644 --- /dev/null +++ b/debian/patches/upstream/am33x_distro_bootcmd/0002-configs-ti_armv7_common.h-Add-default-addresses-for-.patch @@@ -1,0 -1,0 +1,30 @@@ ++From 7749b67f6cff3246444051764b5bc62decfb9f58 Mon Sep 17 00:00:00 2001 ++From: Sjoerd Simons ++Date: Fri, 28 Aug 2015 15:01:55 +0200 ++Subject: [PATCH 2/3] configs: ti_armv7_common.h: Add default addresses for pxe ++ and scripts ++ ++Add mandatory address variables for loading scripts and pxe configuration as ++per README.distro ++ ++Signed-off-by: Sjoerd Simons ++--- ++ include/configs/ti_armv7_common.h | 2 ++ ++ 1 file changed, 2 insertions(+) ++ ++diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h ++index 6dc6515..586bd2b 100644 ++--- a/include/configs/ti_armv7_common.h +++++ b/include/configs/ti_armv7_common.h ++@@ -56,6 +56,8 @@ ++ "fdt_addr_r=0x88000000\0" \ ++ "rdaddr=0x88080000\0" \ ++ "ramdisk_addr_r=0x88080000\0" \ +++ "scriptaddr=0x80000000\0" \ +++ "pxefile_addr_r=0x80100000\0" \ ++ "bootm_size=0x10000000\0" ++ ++ #define DEFAULT_MMC_TI_ARGS \ ++-- ++2.1.4 ++ diff --cc debian/patches/upstream/am33x_distro_bootcmd/0003-configs-am335x_evm-Support-distro-bootcmds.patch index 000000000,000000000..2d98b4325 new file mode 100644 --- /dev/null +++ b/debian/patches/upstream/am33x_distro_bootcmd/0003-configs-am335x_evm-Support-distro-bootcmds.patch @@@ -1,0 -1,0 +1,101 @@@ ++From bc3199fd1875f89e9e1fb2af45665c4a718217b9 Mon Sep 17 00:00:00 2001 ++From: Sjoerd Simons ++Date: Fri, 28 Aug 2015 15:01:56 +0200 ++Subject: [PATCH 3/3] configs: am335x_evm: Support distro bootcmds ++ ++Add support for distro bootcmds and network booting while retaining ++backwards compatibility with the current "legacy" setup. With these ++changes the default boot sequence becomes: ++ ++* SD card (standard distro boot) ++* SD card (legacy boot) ++* EMMC (standard distro boot) ++* EMMC (legacy boot) ++* Nand (legacy boot) ++* PXE (standard distro boot) ++* DHCP (standard distro boot) ++ ++The older boot scripts have some overlap with what the distro ++bootcommands to however i've left them unchanged to prevent introduction ++of subtle bugs. ++ ++Signed-off-by: Sjoerd Simons ++--- ++ include/configs/am335x_evm.h | 45 ++++++++++++++++++++++++++++++++++++-------- ++ 1 file changed, 37 insertions(+), 8 deletions(-) ++ ++diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h ++index 3cf768e..b036199 100644 ++--- a/include/configs/am335x_evm.h +++++ b/include/configs/am335x_evm.h ++@@ -18,6 +18,10 @@ ++ ++ #include ++ +++/* Don't override the distro default bootdelay */ +++#undef CONFIG_BOOTDELAY +++#include +++ ++ #ifndef CONFIG_SPL_BUILD ++ #ifndef CONFIG_FIT ++ # define CONFIG_FIT ++@@ -67,6 +71,37 @@ ++ ++ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG ++ +++#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ +++ "bootcmd_" #devtypel #instance "=" \ +++ "setenv mmcdev " #instance"; "\ +++ "setenv bootpart " #instance":2 ; "\ +++ "run mmcboot\0" +++ +++#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ +++ #devtypel #instance " " +++ +++#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ +++ "bootcmd_" #devtypel "=" \ +++ "run nandboot\0" +++ +++#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ +++ #devtypel #instance " " +++ +++#define BOOT_TARGET_DEVICES(func) \ +++ func(MMC, mmc, 0) \ +++ func(LEGACY_MMC, legacy_mmc, 0) \ +++ func(MMC, mmc, 1) \ +++ func(LEGACY_MMC, legacy_mmc, 1) \ +++ func(NAND, nand, 0) \ +++ func(PXE, pxe, na) \ +++ func(DHCP, dhcp, na) +++ +++#define CONFIG_BOOTCOMMAND \ +++ "run findfdt; " \ +++ "run distro_bootcmd" +++ +++#include +++ ++ #ifndef CONFIG_SPL_BUILD ++ #define CONFIG_EXTRA_ENV_SETTINGS \ ++ DEFAULT_LINUX_BOOT_ENV \ ++@@ -160,16 +195,10 @@ ++ "echo WARNING: Could not determine device tree to use; fi; \0" \ ++ NANDARGS \ ++ NETARGS \ ++- DFUARGS +++ DFUARGS \ +++ BOOTENV ++ #endif ++ ++-#define CONFIG_BOOTCOMMAND \ ++- "run findfdt; " \ ++- "run mmcboot;" \ ++- "setenv mmcdev 1; " \ ++- "setenv bootpart 1:2; " \ ++- "run mmcboot;" \ ++- "run nandboot;" ++ ++ /* NS16550 Configuration */ ++ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ ++-- ++2.1.4 ++ diff --cc debian/patches/upstream/distro-bootcmd-imx/0001-arm-imx-Switch-Wandboard-to-use-config_distro_bootcm.patch index 000000000,000000000..b8c8738cf new file mode 100644 --- /dev/null +++ b/debian/patches/upstream/distro-bootcmd-imx/0001-arm-imx-Switch-Wandboard-to-use-config_distro_bootcm.patch @@@ -1,0 -1,0 +1,143 @@@ ++From acc6bb569390f7e51127d76464db67a434a5d379 Mon Sep 17 00:00:00 2001 ++From: Vagrant Cascadian ++Date: Tue, 27 Oct 2015 12:49:40 -0700 ++Subject: [PATCH 1/3] arm: imx: Switch Wandboard to use ++ config_distro_bootcmd.h. ++ ++This allows for more flexible and standardized boot across multiple ++platforms. ++ ++Remove redundant legacy boot environment. ++ ++Signed-off-by: Vagrant Cascadian ++--- ++ include/configs/wandboard.h | 82 +++++++++++---------------------------------- ++ 1 file changed, 19 insertions(+), 63 deletions(-) ++ ++diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h ++index 6e8aec2..6408b5e 100644 ++--- a/include/configs/wandboard.h +++++ b/include/configs/wandboard.h ++@@ -88,19 +88,15 @@ ++ ++ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG ++ #define CONFIG_EXTRA_ENV_SETTINGS \ ++- "script=boot.scr\0" \ ++- "image=zImage\0" \ ++- "console=ttymxc0\0" \ +++ "console=ttymxc0,115200\0" \ ++ "splashpos=m,m\0" \ ++ "fdtfile=undefined\0" \ ++ "fdt_high=0xffffffff\0" \ ++ "initrd_high=0xffffffff\0" \ +++ "fdt_addr_r=0x18000000\0" \ ++ "fdt_addr=0x18000000\0" \ ++- "boot_fdt=try\0" \ ++ "ip_dyn=yes\0" \ ++ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ ++- "mmcpart=1\0" \ ++- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ ++ "update_sd_firmware_filename=u-boot.imx\0" \ ++ "update_sd_firmware=" \ ++ "if test ${ip_dyn} = yes; then " \ ++@@ -115,8 +111,6 @@ ++ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ ++ "fi; " \ ++ "fi\0" \ ++- "mmcargs=setenv bootargs console=${console},${baudrate} " \ ++- "root=${mmcroot}; run videoargs\0" \ ++ "videoargs=" \ ++ "setenv nextcon 0; " \ ++ "if hdmidet; then " \ ++@@ -143,51 +137,6 @@ ++ "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \ ++ "fi; " \ ++ "setenv bootargs ${bootargs} ${fbmem}\0" \ ++- "loadbootscript=" \ ++- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ ++- "bootscript=echo Running bootscript from mmc ...; " \ ++- "source\0" \ ++- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ ++- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \ ++- "mmcboot=echo Booting from mmc ...; " \ ++- "run mmcargs; " \ ++- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ ++- "if run loadfdt; then " \ ++- "bootz ${loadaddr} - ${fdt_addr}; " \ ++- "else " \ ++- "if test ${boot_fdt} = try; then " \ ++- "bootz; " \ ++- "else " \ ++- "echo WARN: Cannot load the DT; " \ ++- "fi; " \ ++- "fi; " \ ++- "else " \ ++- "bootz; " \ ++- "fi;\0" \ ++- "netargs=setenv bootargs console=${console},${baudrate} " \ ++- "root=/dev/nfs " \ ++- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ ++- "netboot=echo Booting from net ...; " \ ++- "run netargs; " \ ++- "if test ${ip_dyn} = yes; then " \ ++- "setenv get_cmd dhcp; " \ ++- "else " \ ++- "setenv get_cmd tftp; " \ ++- "fi; " \ ++- "${get_cmd} ${image}; " \ ++- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ ++- "if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \ ++- "bootz ${loadaddr} - ${fdt_addr}; " \ ++- "else " \ ++- "if test ${boot_fdt} = try; then " \ ++- "bootz; " \ ++- "else " \ ++- "echo WARN: Cannot load the DT; " \ ++- "fi; " \ ++- "fi; " \ ++- "else " \ ++- "bootz; " \ ++- "fi;\0" \ ++ "findfdt="\ ++ "if test $board_name = C1 && test $board_rev = MX6Q ; then " \ ++ "setenv fdtfile imx6q-wandboard.dtb; fi; " \ ++@@ -199,19 +148,26 @@ ++ "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \ ++ "if test $fdtfile = undefined; then " \ ++ "echo WARNING: Could not determine dtb to use; fi; \0" \ +++ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ +++ "pxe_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ +++ "ramdisk_addr_r=0x13000000\0" \ +++ "ramdiskaddr=0x13000000\0" \ +++ "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ +++ BOOTENV +++ +++#define BOOT_TARGET_DEVICES(func) \ +++ func(MMC, mmc, 0) \ +++ func(MMC, mmc, 1) \ +++ func(USB, usb, 0) \ +++ func(PXE, pxe, na) \ +++ func(DHCP, dhcp, na) ++ ++ #define CONFIG_BOOTCOMMAND \ ++ "run findfdt; " \ ++- "mmc dev ${mmcdev}; if mmc rescan; then " \ ++- "if run loadbootscript; then " \ ++- "run bootscript; " \ ++- "else " \ ++- "if run loadimage; then " \ ++- "run mmcboot; " \ ++- "else run netboot; " \ ++- "fi; " \ ++- "fi; " \ ++- "else run netboot; fi" +++ "run distro_bootcmd" +++ +++#include +++#include ++ ++ /* Physical Memory Map */ ++ #define CONFIG_NR_DRAM_BANKS 1 ++-- ++2.1.4 ++ diff --cc debian/patches/upstream/distro-bootcmd-imx/0002-arm-imx-Switch-mx6cuboxi-to-use-config_distro_bootcm.patch index 000000000,000000000..6ed7c4ade new file mode 100644 --- /dev/null +++ b/debian/patches/upstream/distro-bootcmd-imx/0002-arm-imx-Switch-mx6cuboxi-to-use-config_distro_bootcm.patch @@@ -1,0 -1,0 +1,147 @@@ ++From 1c5e6b6fbb3835b1170c01844c862c0eaa9bffed Mon Sep 17 00:00:00 2001 ++From: Vagrant Cascadian ++Date: Tue, 27 Oct 2015 13:18:22 -0700 ++Subject: [PATCH 2/3] arm: imx: Switch mx6cuboxi to use ++ config_distro_bootcmd.h. ++ ++This allows for more flexible and standardized boot across multiple ++platforms. ++ ++Remove redundant legacy boot environment. ++ ++Cc: Otavio Salvador ++Signed-off-by: Vagrant Cascadian ++--- ++ include/configs/mx6cuboxi.h | 88 +++++++++++++-------------------------------- ++ 1 file changed, 24 insertions(+), 64 deletions(-) ++ ++diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h ++index 6e89dd1..0f3b992 100644 ++--- a/include/configs/mx6cuboxi.h +++++ b/include/configs/mx6cuboxi.h ++@@ -81,23 +81,26 @@ ++ ++ #define CONFIG_MXC_UART_BASE UART1_BASE ++ #define CONFIG_CONSOLE_DEV "ttymxc0" ++-#define CONFIG_MMCROOT "/dev/mmcblk0p2" ++ #define CONFIG_SYS_FSL_USDHC_NUM 1 ++ #define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */ ++ ++ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +++#ifndef CONFIG_SPL_BUILD ++ #define CONFIG_EXTRA_ENV_SETTINGS \ ++- "script=boot.scr\0" \ ++- "image=zImage\0" \ ++ "fdtfile=undefined\0" \ ++ "fdt_addr_r=0x18000000\0" \ ++- "boot_fdt=try\0" \ +++ "fdt_addr=0x18000000\0" \ +++ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ +++ "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ +++ "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ +++ "ramdisk_addr_r=0x13000000\0" \ +++ "ramdiskaddr=0x13000000\0" \ +++ "initrd_high=0xffffffff\0" \ +++ "fdt_high=0xffffffff\0" \ ++ "ip_dyn=yes\0" \ ++ "console=" CONFIG_CONSOLE_DEV "\0" \ ++ "bootm_size=0x10000000\0" \ ++ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ ++- "mmcpart=1\0" \ ++- "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ ++ "update_sd_firmware=" \ ++ "if test ${ip_dyn} = yes; then " \ ++ "setenv get_cmd dhcp; " \ ++@@ -111,53 +114,6 @@ ++ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ ++ "fi; " \ ++ "fi\0" \ ++- "mmcargs=setenv bootargs console=${console},${baudrate} " \ ++- "root=${mmcroot}\0" \ ++- "loadbootscript=" \ ++- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ ++- "bootscript=echo Running bootscript from mmc ...; " \ ++- "source\0" \ ++- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ ++- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \ ++- "mmcboot=echo Booting from mmc ...; " \ ++- "run mmcargs; " \ ++- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ ++- "if run loadfdt; then " \ ++- "bootz ${loadaddr} - ${fdt_addr_r}; " \ ++- "else " \ ++- "if test ${boot_fdt} = try; then " \ ++- "bootz; " \ ++- "else " \ ++- "echo WARN: Cannot load the DT; " \ ++- "fi; " \ ++- "fi; " \ ++- "else " \ ++- "bootz; " \ ++- "fi;\0" \ ++- "netargs=setenv bootargs console=${console},${baudrate} " \ ++- "root=/dev/nfs " \ ++- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ ++- "netboot=echo Booting from net ...; " \ ++- "run netargs; " \ ++- "if test ${ip_dyn} = yes; then " \ ++- "setenv get_cmd dhcp; " \ ++- "else " \ ++- "setenv get_cmd tftp; " \ ++- "fi; " \ ++- "${get_cmd} ${image}; " \ ++- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ ++- "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \ ++- "bootz ${loadaddr} - ${fdt_addr_r}; " \ ++- "else " \ ++- "if test ${boot_fdt} = try; then " \ ++- "bootz; " \ ++- "else " \ ++- "echo WARN: Cannot load the DT; " \ ++- "fi; " \ ++- "fi; " \ ++- "else " \ ++- "bootz; " \ ++- "fi;\0" \ ++ "findfdt="\ ++ "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \ ++ "setenv fdtfile imx6q-hummingboard.dtb; fi; " \ ++@@ -169,20 +125,24 @@ ++ "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \ ++ "if test $fdtfile = undefined; then " \ ++ "echo WARNING: Could not determine dtb to use; fi; \0" \ +++ BOOTENV ++ ++ #define CONFIG_BOOTCOMMAND \ ++ "run findfdt; " \ ++- "mmc dev ${mmcdev};" \ ++- "if mmc rescan; then " \ ++- "if run loadbootscript; then " \ ++- "run bootscript; " \ ++- "else " \ ++- "if run loadimage; then " \ ++- "run mmcboot; " \ ++- "else run netboot; " \ ++- "fi; " \ ++- "fi; " \ ++- "else run netboot; fi" +++ "run distro_bootcmd" +++ +++#define BOOT_TARGET_DEVICES(func) \ +++ func(MMC, mmc, 0) \ +++ func(USB, usb, 0) \ +++ func(PXE, pxe, na) \ +++ func(DHCP, dhcp, na) +++ +++#include +++#include +++ +++#else +++#define CONFIG_EXTRA_ENV_SETTINGS +++#endif /* CONFIG_SPL_BUILD */ ++ ++ /* Physical Memory Map */ ++ #define CONFIG_NR_DRAM_BANKS 1 ++-- ++2.1.4 ++ diff --cc debian/patches/upstream/distro-bootcmd-imx/0003-imx6-fix-warnings-due-to-switch-to-distro-environmen.patch index 000000000,000000000..c8dcc38ce new file mode 100644 --- /dev/null +++ b/debian/patches/upstream/distro-bootcmd-imx/0003-imx6-fix-warnings-due-to-switch-to-distro-environmen.patch @@@ -1,0 -1,0 +1,60 @@@ ++From 3d99e862691bb7053ba9e1537a971971976fde13 Mon Sep 17 00:00:00 2001 ++From: Stefano Babic ++Date: Fri, 13 Nov 2015 10:49:01 +0100 ++Subject: [PATCH 3/3] imx6: fix warnings due to switch to distro environment ++ ++wandboard and mx6cuboxi have warnings because BOOT_DELAY ++is defined twice. ++ ++Signed-off-by: Stefano Babic ++CC: Vagrant Cascadian ++CC: Otavio Salvador ++CC: Fabio Estevam ++--- ++ include/configs/mx6cuboxi.h | 2 +- ++ include/configs/wandboard.h | 2 +- ++ 2 files changed, 2 insertions(+), 2 deletions(-) ++ ++diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h ++index 0f3b992..4feb121 100644 ++--- a/include/configs/mx6cuboxi.h +++++ b/include/configs/mx6cuboxi.h ++@@ -8,6 +8,7 @@ ++ #ifndef __MX6CUBOXI_CONFIG_H ++ #define __MX6CUBOXI_CONFIG_H ++ +++#include ++ #include "mx6_common.h" ++ ++ #define CONFIG_SPL_LIBCOMMON_SUPPORT ++@@ -137,7 +138,6 @@ ++ func(PXE, pxe, na) \ ++ func(DHCP, dhcp, na) ++ ++-#include ++ #include ++ ++ #else ++diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h ++index 6408b5e..4c8e9e9 100644 ++--- a/include/configs/wandboard.h +++++ b/include/configs/wandboard.h ++@@ -9,6 +9,7 @@ ++ #ifndef __CONFIG_H ++ #define __CONFIG_H ++ +++#include ++ #include "mx6_common.h" ++ ++ #define CONFIG_SPL_LIBCOMMON_SUPPORT ++@@ -166,7 +167,6 @@ ++ "run findfdt; " \ ++ "run distro_bootcmd" ++ ++-#include ++ #include ++ ++ /* Physical Memory Map */ ++-- ++2.1.4 ++ diff --cc debian/patches/upstream/image.c-Fix-non-Android-booting-with-ramdisk-and-or-.patch index 000000000,000000000..8cdab7705 new file mode 100644 --- /dev/null +++ b/debian/patches/upstream/image.c-Fix-non-Android-booting-with-ramdisk-and-or-.patch @@@ -1,0 -1,0 +1,33 @@@ ++From c139b5ff0999ec3d44a02ebdb623a92e5782e53e Mon Sep 17 00:00:00 2001 ++From: Tom Rini ++Date: Tue, 27 Oct 2015 19:04:40 -0400 ++Subject: [PATCH 4/4] image.c: Fix non-Android booting with ramdisk and/or ++ device tree ++ ++In 1fec3c5 I added a check that if we had an Android image we default to ++trying the kernel address for a ramdisk. However when we don't have an ++Android image buf is NULL and we oops here. Ensure that we have 'buf' ++to check first. ++ ++Reported-by: elipe Balbi ++Signed-off-by: Tom Rini ++--- ++ common/image.c | 2 +- ++ 1 file changed, 1 insertion(+), 1 deletion(-) ++ ++diff --git a/common/image.c b/common/image.c ++index e607109..85c4f39 100644 ++--- a/common/image.c +++++ b/common/image.c ++@@ -913,7 +913,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, ++ * Look for an Android boot image. ++ */ ++ buf = map_sysmem(images->os.start, 0); ++- if (genimg_get_format(buf) == IMAGE_FORMAT_ANDROID) +++ if (buf && genimg_get_format(buf) == IMAGE_FORMAT_ANDROID) ++ select = argv[0]; ++ #endif ++ ++-- ++2.1.4 ++ diff --cc debian/patches/upstream/lamobo-r1/0001-sunxi-Add-support-for-the-Lamobo-R1-board.patch index 000000000,000000000..0788be0ba new file mode 100644 --- /dev/null +++ b/debian/patches/upstream/lamobo-r1/0001-sunxi-Add-support-for-the-Lamobo-R1-board.patch @@@ -1,0 -1,0 +1,375 @@@ ++[ Vagrant Cascadian ] ++Modifed to remove usb_power_supply entry. ++ ++From aa56cb374de8ae83f3280fdd6c280724228b86d7 Mon Sep 17 00:00:00 2001 ++From: Jelle de Jong ++Date: Sun, 18 Oct 2015 16:34:13 +0200 ++Subject: [PATCH 1/2] sunxi: Add support for the Lamobo R1 board ++ ++The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such ++on the PCB, is meant as a A20 based router board. As such the board comes ++with a built-in switch chip giving it 5 gigabit ethernet ports, and it ++has a large empty area on the pcb with mounting holes which will fit a ++2.5 inch harddisk. To complete its networking features it has a ++Realtek RTL8192CU for WiFi 802.11 b/g/n. ++ ++The dts file is identical to the one submitted upstream. ++ ++Signed-off-by: Jelle de Jong ++Reviewed-by: Hans de Goede ++Signed-off-by: Hans de Goede ++--- ++ arch/arm/dts/Makefile | 1 + ++ arch/arm/dts/sun7i-a20-lamobo-r1.dts | 297 +++++++++++++++++++++++++++++++++++ ++ board/sunxi/MAINTAINERS | 5 + ++ configs/Lamobo_R1_defconfig | 16 ++ ++ 4 files changed, 319 insertions(+) ++ create mode 100644 arch/arm/dts/sun7i-a20-lamobo-r1.dts ++ create mode 100644 configs/Lamobo_R1_defconfig ++ ++Index: u-boot/arch/arm/dts/Makefile ++=================================================================== ++--- u-boot.orig/arch/arm/dts/Makefile +++++ u-boot/arch/arm/dts/Makefile ++@@ -134,6 +134,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ ++ sun7i-a20-cubietruck.dtb \ ++ sun7i-a20-hummingbird.dtb \ ++ sun7i-a20-i12-tvbox.dtb \ +++ sun7i-a20-lamobo-r1.dtb \ ++ sun7i-a20-m3.dtb \ ++ sun7i-a20-m5.dtb \ ++ sun7i-a20-mk808c.dtb \ ++Index: u-boot/arch/arm/dts/sun7i-a20-lamobo-r1.dts ++=================================================================== ++--- /dev/null +++++ u-boot/arch/arm/dts/sun7i-a20-lamobo-r1.dts ++@@ -0,0 +1,292 @@ +++/* +++ * Copyright 2015 Jelle de Jong +++ * +++ * This file is dual-licensed: you can use it either under the terms +++ * of the GPL or the X11 license, at your option. Note that this dual +++ * licensing only applies to this file, and not this project as a +++ * whole. +++ * +++ * a) This file is free software; you can redistribute it and/or +++ * modify it under the terms of the GNU General Public License as +++ * published by the Free Software Foundation; either version 2 of the +++ * License, or (at your option) any later version. +++ * +++ * This file is distributed in the hope that it will be useful, +++ * but WITHOUT ANY WARRANTY; without even the implied warranty of +++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +++ * GNU General Public License for more details. +++ * +++ * Or, alternatively, +++ * +++ * b) Permission is hereby granted, free of charge, to any person +++ * obtaining a copy of this software and associated documentation +++ * files (the "Software"), to deal in the Software without +++ * restriction, including without limitation the rights to use, +++ * copy, modify, merge, publish, distribute, sublicense, and/or +++ * sell copies of the Software, and to permit persons to whom the +++ * Software is furnished to do so, subject to the following +++ * conditions: +++ * +++ * The above copyright notice and this permission notice shall be +++ * included in all copies or substantial portions of the Software. +++ * +++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES +++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT +++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +++ * OTHER DEALINGS IN THE SOFTWARE. +++ */ +++ +++/dts-v1/; +++#include "sun7i-a20.dtsi" +++#include "sunxi-common-regulators.dtsi" +++ +++#include +++#include +++#include +++ +++/ { +++ model = "Lamobo R1"; +++ compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; +++ +++ aliases { +++ serial0 = &uart0; +++ serial1 = &uart3; +++ serial2 = &uart7; +++ }; +++ +++ chosen { +++ stdout-path = "serial0:115200n8"; +++ }; +++ +++ leds { +++ compatible = "gpio-leds"; +++ pinctrl-names = "default"; +++ pinctrl-0 = <&led_pins_lamobo_r1>; +++ +++ green { +++ label = "lamobo_r1:green:usr"; +++ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; +++ }; +++ }; +++ +++ reg_gmac_3v3: gmac-3v3 { +++ compatible = "regulator-fixed"; +++ pinctrl-names = "default"; +++ pinctrl-0 = <&gmac_power_pin_lamobo_r1>; +++ regulator-name = "gmac-3v3"; +++ regulator-min-microvolt = <3300000>; +++ regulator-max-microvolt = <3300000>; +++ startup-delay-us = <100000>; +++ enable-active-high; +++ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ +++ }; +++}; +++ +++&ahci_pwr_pin_a { +++ allwinner,pins = "PB3"; +++}; +++ +++&ahci { +++ target-supply = <®_ahci_5v>; +++ status = "okay"; +++}; +++ +++&cpu0 { +++ cpu-supply = <®_dcdc2>; +++ operating-points = < +++ /* kHz uV */ +++ 960000 1400000 +++ 912000 1400000 +++ 864000 1350000 +++ 720000 1250000 +++ 528000 1150000 +++ 312000 1100000 +++ 144000 1050000 +++ >; +++}; +++ +++&ehci0 { +++ status = "okay"; +++}; +++ +++&ehci1 { +++ status = "okay"; +++}; +++ +++&gmac { +++ pinctrl-names = "default"; +++ pinctrl-0 = <&gmac_pins_rgmii_a>; +++ phy = <&phy1>; +++ phy-mode = "rgmii"; +++ phy-supply = <®_gmac_3v3>; +++ status = "okay"; +++ +++ phy1: ethernet-phy@1 { +++ reg = <1>; +++ }; +++}; +++ +++&i2c0 { +++ pinctrl-names = "default"; +++ pinctrl-0 = <&i2c0_pins_a>; +++ status = "okay"; +++ +++ axp209: pmic@34 { +++ reg = <0x34>; +++ interrupt-parent = <&nmi_intc>; +++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>; +++ }; +++}; +++ +++&i2c2 { +++ pinctrl-names = "default"; +++ pinctrl-0 = <&i2c2_pins_a>; +++ status = "okay"; +++}; +++ +++&ir0 { +++ pinctrl-names = "default"; +++ pinctrl-0 = <&ir0_rx_pins_a>; +++ status = "okay"; +++}; +++ +++&mmc0 { +++ pinctrl-names = "default"; +++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; +++ vmmc-supply = <®_vcc3v3>; +++ bus-width = <4>; +++ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ +++ cd-inverted; +++ status = "okay"; +++}; +++ +++&ohci0 { +++ status = "okay"; +++}; +++ +++&ohci1 { +++ status = "okay"; +++}; +++ +++&otg_sram { +++ status = "okay"; +++}; +++ +++&pio { +++ usb0_id_detect_pin: usb0_id_detect_pin@0 { +++ allwinner,pins = "PH4"; +++ allwinner,function = "gpio_in"; +++ allwinner,drive = ; +++ allwinner,pull = ; +++ }; +++ +++ mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { +++ allwinner,pins = "PH10"; +++ allwinner,function = "gpio_in"; +++ allwinner,drive = ; +++ allwinner,pull = ; +++ }; +++ +++ gmac_power_pin_lamobo_r1: gmac_power_pin@0 { +++ allwinner,pins = "PH23"; +++ allwinner,function = "gpio_out"; +++ allwinner,drive = ; +++ allwinner,pull = ; +++ }; +++ +++ led_pins_lamobo_r1: led_pins@0 { +++ allwinner,pins = "PH24"; +++ allwinner,function = "gpio_out"; +++ allwinner,drive = ; +++ allwinner,pull = ; +++ }; +++}; +++ +++#include "axp209.dtsi" +++ +++®_ahci_5v { +++ gpio = <&pio 1 3 0>; /* PB3 */ +++ status = "okay"; +++}; +++ +++®_dcdc2 { +++ regulator-always-on; +++ regulator-min-microvolt = <1000000>; +++ regulator-max-microvolt = <1400000>; +++ regulator-name = "vdd-cpu"; +++}; +++ +++®_dcdc3 { +++ regulator-always-on; +++ regulator-min-microvolt = <1000000>; +++ regulator-max-microvolt = <1400000>; +++ regulator-name = "vdd-int-dll"; +++}; +++ +++®_ldo1 { +++ regulator-name = "vdd-rtc"; +++}; +++ +++®_ldo2 { +++ regulator-always-on; +++ regulator-min-microvolt = <3000000>; +++ regulator-max-microvolt = <3000000>; +++ regulator-name = "avcc"; +++}; +++ +++®_usb0_vbus { +++ status = "okay"; +++}; +++ +++®_usb1_vbus { +++ status = "okay"; +++}; +++ +++®_usb2_vbus { +++ status = "okay"; +++}; +++ +++&spi0 { +++ pinctrl-names = "default"; +++ pinctrl-0 = <&spi0_pins_a>, +++ <&spi0_cs0_pins_a>, +++ <&spi0_cs1_pins_a>; +++ status = "okay"; +++}; +++ +++&uart0 { +++ pinctrl-names = "default"; +++ pinctrl-0 = <&uart0_pins_a>; +++ status = "okay"; +++}; +++ +++&uart3 { +++ pinctrl-names = "default"; +++ pinctrl-0 = <&uart3_pins_b>; +++ status = "okay"; +++}; +++ +++&uart7 { +++ pinctrl-names = "default"; +++ pinctrl-0 = <&uart7_pins_a>; +++ status = "okay"; +++}; +++ +++&usb_otg { +++ dr_mode = "otg"; +++ status = "okay"; +++}; +++ +++&usbphy { +++ pinctrl-names = "default"; +++ pinctrl-0 = <&usb0_id_detect_pin>; +++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ +++ usb0_vbus-supply = <®_usb0_vbus>; +++ usb1_vbus-supply = <®_usb1_vbus>; +++ usb2_vbus-supply = <®_usb2_vbus>; +++ status = "okay"; +++}; ++Index: u-boot/board/sunxi/MAINTAINERS ++=================================================================== ++--- u-boot.orig/board/sunxi/MAINTAINERS +++++ u-boot/board/sunxi/MAINTAINERS ++@@ -134,6 +134,11 @@ M: Chen-Yu Tsai ++ S: Maintained ++ F: configs/Ippo_q8h_v5_defconfig ++ +++LAMOBO-R1 BOARD +++M: Jelle de Jong +++S: Maintained +++F: configs/Lamobo_R1_defconfig +++ ++ LINKSPRITE-PCDUINO BOARD ++ M: Zoltan Herpai ++ S: Maintained ++Index: u-boot/configs/Lamobo_R1_defconfig ++=================================================================== ++--- /dev/null +++++ u-boot/configs/Lamobo_R1_defconfig ++@@ -0,0 +1,16 @@ +++CONFIG_ARM=y +++CONFIG_ARCH_SUNXI=y +++CONFIG_MACH_SUN7I=y +++CONFIG_DRAM_CLK=432 +++CONFIG_MMC0_CD_PIN="PH10" +++CONFIG_GMAC_TX_DELAY=4 +++CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1" +++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +++CONFIG_SPL=y +++CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,SATAPWR=SUNXI_GPB(3)" +++# CONFIG_CMD_IMLS is not set +++# CONFIG_CMD_FLASH is not set +++# CONFIG_CMD_FPGA is not set +++CONFIG_CMD_GPIO=y +++CONFIG_ETH_DESIGNWARE=y +++CONFIG_USB_EHCI_HCD=y diff --cc debian/patches/upstream/mkimage-fix-multi-script/0001-mkimage-Fix-generating-multi-and-script-images.patch index 000000000,000000000..9fa4d0637 new file mode 100644 --- /dev/null +++ b/debian/patches/upstream/mkimage-fix-multi-script/0001-mkimage-Fix-generating-multi-and-script-images.patch @@@ -1,0 -1,0 +1,69 @@@ ++Bug-Debian: https://bugs.debian.org/805434 ++From 6ae6e16005252dbca0b4a06beea1be895df48e16 Mon Sep 17 00:00:00 2001 ++From: Philippe De Swert ++Date: Fri, 4 Dec 2015 00:11:23 +0200 ++Subject: [PATCH 1/2] mkimage : Fix generating multi and script images ++ ++Seems 92a655c3 broke creating multi and script type images. ++Since the file1:file2:file3 string does not get split up, ++it fails on trying to open an non-existing file. ++ ++mkimage -A arm -O linux -T multi -C none -d zImage:splash.bmp:device.dtb uimage ++tools/mkimage: Can't open zImage:splash.bmp:device.dtb: No such file or directory ++ ++Since the sizes of the different parts seem to get added in the actual ++routine that handles multi and script type images, we can probably skip the ++bit of the code that causes the failure for that type of images. ++ ++Signed-off-by: Philippe De Swert ++--- ++ tools/mkimage.c | 31 ++++++++++++++++++------------- ++ 1 file changed, 18 insertions(+), 13 deletions(-) ++ ++diff --git a/tools/mkimage.c b/tools/mkimage.c ++index 8af9d50..ae01cb1 100644 ++--- a/tools/mkimage.c +++++ b/tools/mkimage.c ++@@ -311,21 +311,26 @@ NXTARG: ; ++ exit (retval); ++ } ++ ++- dfd = open(params.datafile, O_RDONLY | O_BINARY); ++- if (dfd < 0) { ++- fprintf(stderr, "%s: Can't open %s: %s\n", ++- params.cmdname, params.datafile, strerror(errno)); ++- exit(EXIT_FAILURE); ++- } +++ if (!params.type == IH_TYPE_MULTI || +++ !params.type == IH_TYPE_SCRIPT) { +++ dfd = open(params.datafile, O_RDONLY | O_BINARY); +++ if (dfd < 0) { +++ fprintf(stderr, "%s: Can't open %s: %s\n", +++ params.cmdname, params.datafile, +++ strerror(errno)); +++ exit(EXIT_FAILURE); +++ } ++ ++- if (fstat(dfd, &sbuf) < 0) { ++- fprintf(stderr, "%s: Can't stat %s: %s\n", ++- params.cmdname, params.datafile, strerror(errno)); ++- exit(EXIT_FAILURE); ++- } +++ if (fstat(dfd, &sbuf) < 0) { +++ fprintf(stderr, "%s: Can't stat %s: %s\n", +++ params.cmdname, params.datafile, +++ strerror(errno)); +++ exit(EXIT_FAILURE); +++ } ++ ++- params.file_size = sbuf.st_size + tparams->header_size; ++- close(dfd); +++ params.file_size = sbuf.st_size + tparams->header_size; +++ close(dfd); +++ } ++ ++ /* ++ * In case there an header with a variable ++-- ++2.1.4 ++ diff --cc debian/patches/upstream/mkimage-fix-multi-script/0002-mkimage-Fix-warning-from-fix-for-generating-multi-an.patch index 000000000,000000000..8de660c81 new file mode 100644 --- /dev/null +++ b/debian/patches/upstream/mkimage-fix-multi-script/0002-mkimage-Fix-warning-from-fix-for-generating-multi-an.patch @@@ -1,0 -1,0 +1,48 @@@ ++Bug-Debian: https://bugs.debian.org/805434 ++From 34633141259e6af20959e087b1c244c3285a306b Mon Sep 17 00:00:00 2001 ++From: Marek Vasut ++Date: Mon, 7 Dec 2015 18:01:54 +0100 ++Subject: [PATCH 2/2] mkimage: Fix warning from fix for generating multi and ++ script images again ++ ++Seems 6ae6e160 broke creating images in certain cases, there ++are two problems with that patch. ++ ++First is that the expression "!x == 4 || !x == 6" is ambiguous. The ++intention here was "!(x == 4) || !(x == 6)" based on reading further in ++the file, where this was borrowed from. This however is interpreted by ++gcc as "(!x) == 4 || (!x) == 6" and always false. gcc-5.x will warn ++about this case. ++ ++The second problem is that we do not want to test for the case of "(NOT x ++is 4) OR (NOT x is 6)" but instead "(x is not equal to 4) AND (x is not ++equal to 6)". This is because in those two cases we already execute the ++code question in another part of the file. Rewrite the expression and ++add parenthesis for clarity. ++ ++Signed-off-by: Marek Vasut ++Cc: Tom Rini ++Cc: Philippe De Swert ++Cc: Simon Glass ++[trini: Re-word Marek's explanation] ++--- ++ tools/mkimage.c | 3 +-- ++ 1 file changed, 1 insertion(+), 2 deletions(-) ++ ++diff --git a/tools/mkimage.c b/tools/mkimage.c ++index ae01cb1..8f8b6df 100644 ++--- a/tools/mkimage.c +++++ b/tools/mkimage.c ++@@ -311,8 +311,7 @@ NXTARG: ; ++ exit (retval); ++ } ++ ++- if (!params.type == IH_TYPE_MULTI || ++- !params.type == IH_TYPE_SCRIPT) { +++ if ((params.type != IH_TYPE_MULTI) && (params.type != IH_TYPE_SCRIPT)) { ++ dfd = open(params.datafile, O_RDONLY | O_BINARY); ++ if (dfd < 0) { ++ fprintf(stderr, "%s: Can't open %s: %s\n", ++-- ++2.1.4 ++ diff --cc debian/patches/upstream/novena/0001-arm-imx6-novena-gw_ventana-Fix-use-of-pfuze100-bit-d.patch index 000000000,000000000..2630e911f new file mode 100644 --- /dev/null +++ b/debian/patches/upstream/novena/0001-arm-imx6-novena-gw_ventana-Fix-use-of-pfuze100-bit-d.patch @@@ -1,0 -1,0 +1,61 @@@ ++From 18e02ffe5e626fe409ca9427e368c879f6ee450c Mon Sep 17 00:00:00 2001 ++From: Marek Vasut ++Date: Thu, 26 Nov 2015 14:08:50 +0100 ++Subject: [PATCH 1/2] arm: imx6: novena, gw_ventana: Fix use of pfuze100 bit ++ definitions ++ ++The following patch changed the PFUZE100 swbst register bit definitions ++and broke PMIC configuration on multiple boards, at least on the novena ++and gw_ventana. This patch fixes it. ++ ++commit 8fa46350a4c7dca7710362f6c871098557b934ad ++Author: Peng Fan ++Date: Fri Aug 7 16:43:45 2015 +0800 ++ ++ power: regulator: add pfuze100 support ++ ++Signed-off-by: Marek Vasut ++Cc: Fabio Estevam ++Cc: Peng Fan ++Cc: Przemyslaw Marczak ++Cc: Stefano Babic ++Cc: Tim Harvey ++Cc: Vagrant Cascadian ++Reviewed-by: Przemyslaw Marczak ++Tested-by: Vagrant Cascadian ++Reviewed-by: Peng Fan ++Acked-by: Tim Harvey ++--- ++ board/gateworks/gw_ventana/common.c | 2 +- ++ board/kosagi/novena/novena.c | 2 +- ++ 2 files changed, 2 insertions(+), 2 deletions(-) ++ ++diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c ++index d406c83..a20190e 100644 ++--- a/board/gateworks/gw_ventana/common.c +++++ b/board/gateworks/gw_ventana/common.c ++@@ -806,7 +806,7 @@ void setup_pmic(void) ++ /* Set SWBST to 5.0V and enable */ ++ pmic_reg_read(p, PFUZE100_SWBSTCON1, ®); ++ reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK); ++- reg |= (SWBST_5_00V | SWBST_MODE_AUTO); +++ reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT)); ++ pmic_reg_write(p, PFUZE100_SWBSTCON1, reg); ++ } ++ } ++diff --git a/board/kosagi/novena/novena.c b/board/kosagi/novena/novena.c ++index babba85..b3159d3 100644 ++--- a/board/kosagi/novena/novena.c +++++ b/board/kosagi/novena/novena.c ++@@ -216,7 +216,7 @@ int power_init_board(void) ++ /* Set SWBST to 5.0V and enable (for USB) */ ++ pmic_reg_read(p, PFUZE100_SWBSTCON1, ®); ++ reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK); ++- reg |= (SWBST_5_00V | SWBST_MODE_AUTO); +++ reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT)); ++ pmic_reg_write(p, PFUZE100_SWBSTCON1, reg); ++ ++ return 0; ++-- ++2.1.4 ++ diff --cc debian/patches/upstream/novena/0002-arm-imx6-novena-Enable-extfs-support-in-SPL.patch index 000000000,000000000..4f184e71a new file mode 100644 --- /dev/null +++ b/debian/patches/upstream/novena/0002-arm-imx6-novena-Enable-extfs-support-in-SPL.patch @@@ -1,0 -1,0 +1,29 @@@ ++From a80a999c9b5c128cad2f67b4b32036bd4d667904 Mon Sep 17 00:00:00 2001 ++From: Marek Vasut ++Date: Thu, 26 Nov 2015 00:18:45 +0100 ++Subject: [PATCH 2/2] arm: imx6: novena: Enable extfs support in SPL ++ ++Simple patch to enable support for extfs filesystem in SPL, ++this is useful to those who want to avoid vfat like plague. ++ ++Signed-off-by: Marek Vasut ++Cc: Stefano Babic ++--- ++ include/configs/novena.h | 1 + ++ 1 file changed, 1 insertion(+) ++ ++diff --git a/include/configs/novena.h b/include/configs/novena.h ++index d88389a..4b4f2d7 100644 ++--- a/include/configs/novena.h +++++ b/include/configs/novena.h ++@@ -82,6 +82,7 @@ ++ ++ /* SPL */ ++ #define CONFIG_SPL_FAT_SUPPORT +++#define CONFIG_SPL_EXT_SUPPORT ++ #define CONFIG_SPL_MMC_SUPPORT ++ #include "imx6_spl.h" /* common IMX6 SPL configuration */ ++ ++-- ++2.1.4 ++ diff --cc debian/rules index 000000000,000000000..9772968ae new file mode 100755 --- /dev/null +++ b/debian/rules @@@ -1,0 -1,0 +1,99 @@@ ++#!/usr/bin/make -f ++ ++DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH) ++DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) ++DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) ++export DEBIAN_REVISION ?= $(shell dpkg-parsechangelog --show-field Version | sed -e 's,.*+dfsg,+dfsg,') ++export SOURCE_DATE_EPOCH = $(shell date -d "$$(dpkg-parsechangelog --count 1 --show-field Date)" +%s) ++ ++ifneq ($(DEB_BUILD_GNU_TYPE),$(DEB_HOST_GNU_TYPE)) ++export CROSS_COMPILE ?= $(DEB_HOST_GNU_TYPE)- ++cross_build_tools ?= y ++endif ++ ++# support parallel build using DEB_BUILD_OPTIONS=parallel=N ++ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS))) ++ DEB_UBOOT_FLAGS += -j$(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS))) ++endif ++ ++# the upstream build passes LDFLAGS directly to ld instead of calling gcc for ++# linking; so instead of passing -Wl,foo in LDFLAGS as in automake builds, one ++# should set LDFLAGS to foo directly ++comma := , ++LDFLAGS := $(patsubst -Wl$(comma)%,%,$(LDFLAGS)) ++ ++%: ++ dh $@ --parallel ++ ++override_dh_auto_build: TOOLSDIR := debian/build/tools ++override_dh_auto_build: ++ set -e; sed -n 's/^$(DEB_HOST_ARCH)[[:space:]]\+//p' debian/targets \ ++ | while read subarch platform targets; do \ ++ builddir=debian/build/$$platform; \ ++ targets="$$targets uboot.elf" ;\ ++ mkdir -p $$builddir; \ ++ $(MAKE) O=$$builddir $${platform}_defconfig; \ ++ $(MAKE) $(DEB_UBOOT_FLAGS) O=$$builddir all; \ ++ install -m 644 $$builddir/u-boot $$builddir/uboot.elf; \ ++ $(CROSS_COMPILE)strip --remove-section=.comment \ ++ $$builddir/uboot.elf; \ ++ for target in $$targets; do \ ++ chmod -x $$builddir/$$target; \ ++ echo $$builddir/$$target /usr/lib/u-boot/$$platform/ \ ++ >> debian/build/targets.$$subarch; \ ++ echo $$platform >> debian/build/platforms.$$subarch; \ ++ done ; \ ++ case $${subarch} in \ ++ sunxi) builddir=$${builddir}_FEL ;\ ++ targets="u-boot.bin spl/u-boot-spl.bin" ;\ ++ mkdir -p $$builddir ;\ ++ $(MAKE) O=$$builddir $${platform}_defconfig; \ ++ sed -i -e 's/^# \(CONFIG_SPL_FEL\) is not set/\1=y/g' $$builddir/.config ;\ ++ platform="$${platform}_FEL" ;\ ++ $(MAKE) $(DEB_UBOOT_FLAGS) O=$$builddir olddefconfig ; \ ++ $(MAKE) $(DEB_UBOOT_FLAGS) O=$$builddir $$targets ; \ ++ for target in $$targets ; do \ ++ chmod -x $$builddir/$$target; \ ++ echo $$builddir/$$target /usr/lib/u-boot/$$platform/ \ ++ >> debian/build/targets.$$subarch; \ ++ done ;; \ ++ esac; \ ++ done ++ ++ # Avoid requirement for .config ++ mkdir -p $(TOOLSDIR)/include/config ++ touch $(TOOLSDIR)/include/config/auto.conf ++ # Load dummy config ++ $(MAKE) O=$(TOOLSDIR) CROSS_COMPILE=$(CROSS_COMPILE) sandbox_defconfig ++ # board-independent tools ++ $(MAKE) O=$(TOOLSDIR) $(DEB_UBOOT_FLAGS) \ ++ CROSS_COMPILE=$(CROSS_COMPILE) \ ++ CROSS_BUILD_TOOLS=$(cross_build_tools) \ ++ NO_SDL=1 \ ++ tools-only ++ $(MAKE) O=$(TOOLSDIR) $(DEB_UBOOT_FLAGS) \ ++ CROSS_COMPILE=$(CROSS_COMPILE) \ ++ NO_SDL=1 \ ++ env ++ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/env/fw_printenv ++ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/mkimage ++ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/kwboot ++ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/mksunxiboot ++ ++override_dh_auto_test: ++ # skip tests. ++ ++override_dh_clean: ++ rm -rf debian/build/ ++ dh_clean ++ ++override_dh_gencontrol: ++ debian/bin/update-substvars ++ dh_gencontrol ++ ++get-orig-source: ++ # Use uscan from the devscripts package to download new ++ # tarball, remove files incompatible with the DFSG (see ++ # Files-Excluded in debian/copyright), and repack with xz ++ # compression. ++ uscan --download --repack --compression=xz diff --cc debian/source/format index 000000000,000000000..163aaf8d8 new file mode 100644 --- /dev/null +++ b/debian/source/format @@@ -1,0 -1,0 +1,1 @@@ ++3.0 (quilt) diff --cc debian/source/include-binaries index 000000000,000000000..7f449d558 new file mode 100644 --- /dev/null +++ b/debian/source/include-binaries @@@ -1,0 -1,0 +1,1 @@@ ++tools/logos/solidrun.bmp diff --cc debian/targets index 000000000,000000000..411823046 new file mode 100644 --- /dev/null +++ b/debian/targets @@@ -1,0 -1,0 +1,24 @@@ ++# ARCH subarch platform target ++# -------------------------------------------- ++armel - dockstar u-boot.kwb ++ ++# Ian Campbell ++armel - dreamplug u-boot.kwb ++ ++# drEagle ++armel - guruplug u-boot.kwb ++ ++# Vagrant Cascadian , rpi B 256M ++armel - rpi u-boot.bin ++armhf - rpi u-boot.bin ++ ++# drEagle ++armel - sheevaplug u-boot.kwb ++ ++avr32 - hammerhead u-boot.img ++ ++mips - qemu_mips u-boot.bin ++ ++sh4 - r2dplus u-boot.bin ++ ++sh4 - sh7785lcr_32bit u-boot.bin diff --cc debian/u-boot-exynos.install index 000000000,000000000..ebff56afc new file mode 100755 --- /dev/null +++ b/debian/u-boot-exynos.install @@@ -1,0 -1,0 +1,2 @@@ ++#!/bin/sh ++debian/bin/u-boot-install-targets exynos "doc/README.odroid" diff --cc debian/u-boot-exynos.lintian-overrides index 000000000,000000000..8beaba8f7 new file mode 100644 --- /dev/null +++ b/debian/u-boot-exynos.lintian-overrides @@@ -1,0 -1,0 +1,13 @@@ ++ ++# There are no file conflicts across architectures for u-boot, as each ++# target is only installed on a single architecture. In theory, some ++# targets could be built on multiple architectures, but could instead install ++# the package for the architecture needed. ++u-boot-exynos [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/arndale/uboot.elf ++u-boot-exynos [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/odroid/uboot.elf ++ ++# These bootloaders need to be statically linked. ++u-boot-exynos [armhf]: statically-linked-binary usr/lib/u-boot/arndale/uboot.elf ++u-boot-exynos [armhf]: statically-linked-binary usr/lib/u-boot/odroid/uboot.elf ++ ++u-boot-exynos: description-synopsis-starts-with-article diff --cc debian/u-boot-exynos.substvars index 000000000,000000000..abd3ebebc new file mode 100644 --- /dev/null +++ b/debian/u-boot-exynos.substvars @@@ -1,0 -1,0 +1,1 @@@ ++misc:Depends= diff --cc debian/u-boot-imx.README.Debian index 000000000,000000000..2d9587176 new file mode 100644 --- /dev/null +++ b/debian/u-boot-imx.README.Debian @@@ -1,0 -1,0 +1,21 @@@ ++== Installation == ++ ++At this point, you must install U-Boot to flash yourself. ++ ++MX53LOCO: ++ ++ dd bs=1024 if=u-boot.imx of=/dev/sdX seek=1 ++ ++wandboard (quad, dual-lite and solo): ++ ++ dd if=/usr/lib/u-boot/wandboard/SPL of=/dev/mmcblk0 bs=1k seek=1 ++ dd if=/usr/lib/u-boot/wandboard/u-boot.img of=/dev/mmcblk0 bs=1k seek=69 ++ ++mx6cuboxi (Cubox-i and Hummingboard): ++ ++ dd if=/usr/lib/u-boot/mx6cuboxi/SPL of=/dev/mmcblk0 bs=1k seek=1 ++ dd if=/usr/lib/u-boot/mx6cuboxi/u-boot.img of=/dev/mmcblk0 bs=1k seek=69 ++ ++== U-Boot environment tools == ++ ++fw_printenv / fw_setenv read /etc/fw_env.config for configuration. diff --cc debian/u-boot-imx.install index 000000000,000000000..cc4eb34ec new file mode 100755 --- /dev/null +++ b/debian/u-boot-imx.install @@@ -1,0 -1,0 +1,2 @@@ ++#!/bin/sh ++debian/bin/u-boot-install-targets imx diff --cc debian/u-boot-imx.lintian-overrides index 000000000,000000000..f5b3dd2f7 new file mode 100644 --- /dev/null +++ b/debian/u-boot-imx.lintian-overrides @@@ -1,0 -1,0 +1,23 @@@ ++ ++# There are no file conflicts across architectures for u-boot, as each ++# target is only installed on a single architecture. In theory, some ++# targets could be built on multiple architectures, but could instead install ++# the package for the architecture needed. ++u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/mx53loco/uboot.elf ++u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/mx6cuboxi/uboot.elf ++u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/nitrogen6q/uboot.elf ++u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/novena/uboot.elf ++u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/udoo/uboot.elf ++u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/usbarmory/uboot.elf ++u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/wandboard/uboot.elf ++ ++# These bootloaders need to be statically linked. ++u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/mx53loco/uboot.elf ++u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/mx6cuboxi/uboot.elf ++u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/nitrogen6q/uboot.elf ++u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/novena/uboot.elf ++u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/udoo/uboot.elf ++u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/usbarmory/uboot.elf ++u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/wandboard/uboot.elf ++ ++u-boot-imx: description-synopsis-starts-with-article diff --cc debian/u-boot-imx.substvars index 000000000,000000000..abd3ebebc new file mode 100644 --- /dev/null +++ b/debian/u-boot-imx.substvars @@@ -1,0 -1,0 +1,1 @@@ ++misc:Depends= diff --cc debian/u-boot-omap.README.Debian index 000000000,000000000..0127664c0 new file mode 100644 --- /dev/null +++ b/debian/u-boot-omap.README.Debian @@@ -1,0 -1,0 +1,13 @@@ ++== Installation == ++ ++At this point, you must install U-Boot to flash yourself. ++ ++The BeagleBone Black (am335x_boneblack) can be flashed to microSD or eMMC directly: ++ ++ dd if=/usr/lib/u-boot/am335x_boneblack/MLO of=/dev/mmcblkX count=1 seek=1 conv=notrunc bs=128k ++ dd if=/usr/lib/u-boot/am335x_boneblack/u-boot.img of=/dev/mmcblkX count=2 seek=1 conv=notrunc bs=384k ++ ++== U-Boot environment tools == ++ ++fw_printenv / fw_setenv read /etc/fw_env.config for configuration. ++ diff --cc debian/u-boot-omap.install index 000000000,000000000..a28a041c5 new file mode 100755 --- /dev/null +++ b/debian/u-boot-omap.install @@@ -1,0 -1,0 +1,2 @@@ ++#!/bin/sh ++debian/bin/u-boot-install-targets omap "doc/README.nokia_rx51" diff --cc debian/u-boot-omap.lintian-overrides index 000000000,000000000..0c5f41617 new file mode 100644 --- /dev/null +++ b/debian/u-boot-omap.lintian-overrides @@@ -1,0 -1,0 +1,19 @@@ ++ ++# There are no file conflicts across architectures for u-boot, as each ++# target is only installed on a single architecture. In theory, some ++# targets could be built on multiple architectures, but could instead install ++# the package for the architecture needed. ++u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/am335x_boneblack/uboot.elf ++u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/igep0020/uboot.elf ++u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/nokia_rx51/uboot.elf ++u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/omap3_beagle/uboot.elf ++u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/omap4_panda/uboot.elf ++ ++# These bootloaders need to be statically linked. ++u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/am335x_boneblack/uboot.elf ++u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/igep0020/uboot.elf ++u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/nokia_rx51/uboot.elf ++u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/omap3_beagle/uboot.elf ++u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/omap4_panda/uboot.elf ++ ++u-boot-omap: description-synopsis-starts-with-article diff --cc debian/u-boot-omap.substvars index 000000000,000000000..abd3ebebc new file mode 100644 --- /dev/null +++ b/debian/u-boot-omap.substvars @@@ -1,0 -1,0 +1,1 @@@ ++misc:Depends= diff --cc debian/u-boot-rockchip.docs index 000000000,000000000..d86f757aa new file mode 100644 --- /dev/null +++ b/debian/u-boot-rockchip.docs @@@ -1,0 -1,0 +1,1 @@@ ++doc/README.rockchip diff --cc debian/u-boot-rockchip.install index 000000000,000000000..73ddfc2f3 new file mode 100755 --- /dev/null +++ b/debian/u-boot-rockchip.install @@@ -1,0 -1,0 +1,2 @@@ ++#!/bin/sh ++debian/bin/u-boot-install-targets rockchip "doc/README.rockchip" diff --cc debian/u-boot-rockchip.lintian-overrides index 000000000,000000000..d0433aeb5 new file mode 100644 --- /dev/null +++ b/debian/u-boot-rockchip.lintian-overrides @@@ -1,0 -1,0 +1,11 @@@ ++ ++# There are no file conflicts across architectures for u-boot, as each ++# target is only installed on a single architecture. In theory, some ++# targets could be built on multiple architectures, but could instead install ++# the package for the architecture needed. ++u-boot-rockchip [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/firefly-rk3288/uboot.elf ++ ++# These bootloaders need to be statically linked. ++u-boot-rockchip [armhf]: statically-linked-binary usr/lib/u-boot/firefly-rk3288/uboot.elf ++ ++u-boot-rockchip: description-synopsis-starts-with-article diff --cc debian/u-boot-sunxi.README.Debian index 000000000,000000000..42c8b8b7b new file mode 100644 --- /dev/null +++ b/debian/u-boot-sunxi.README.Debian @@@ -1,0 -1,0 +1,11 @@@ ++== Installation == ++ ++At this point, you must install U-Boot to flash yourself. ++ ++Many sunxi boards (Bananapi, Cubieboard) can be written to SD directly: ++ ++ dd if=/usr/lib/u-boot/BOARD/u-boot-sunxi-with-spl.bin of=/dev/mmcblkX bs=1024 seek=8 ++ ++== U-Boot environment tools == ++ ++fw_printenv / fw_setenv read /etc/fw_env.config for configuration. diff --cc debian/u-boot-sunxi.install index 000000000,000000000..014df8741 new file mode 100755 --- /dev/null +++ b/debian/u-boot-sunxi.install @@@ -1,0 -1,0 +1,2 @@@ ++#!/bin/sh ++debian/bin/u-boot-install-targets sunxi diff --cc debian/u-boot-sunxi.lintian-overrides index 000000000,000000000..4d1e6c1c2 new file mode 100644 --- /dev/null +++ b/debian/u-boot-sunxi.lintian-overrides @@@ -1,0 -1,0 +1,39 @@@ ++ ++# There are no file conflicts across architectures for u-boot, as each ++# target is only installed on a single architecture. In theory, some ++# targets could be built on multiple architectures, but could instead install ++# the package for the architecture needed. ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A10-OLinuXino-Lime/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A10s-OLinuXino-M/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-Olimex-SOM-EVB/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-OLinuXino-Lime/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-OLinuXino-Lime2/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-OLinuXino_MICRO/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Bananapi/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Bananapro/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubieboard/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubieboard2/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubietruck/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Lamobo_R1/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Linksprite_pcDuino/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Linksprite_pcDuino3/uboot.elf ++u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Mini-X/uboot.elf ++ ++# These bootloaders need to be statically linked. ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A10-OLinuXino-Lime/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A10s-OLinuXino-M/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-Olimex-SOM-EVB/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-OLinuXino-Lime/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-OLinuXino-Lime2/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-OLinuXino_MICRO/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Bananapi/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Bananapro/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubieboard/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubieboard2/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubietruck/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Lamobo_R1/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Linksprite_pcDuino/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Linksprite_pcDuino3/uboot.elf ++u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Mini-X/uboot.elf ++ ++u-boot-sunxi: description-synopsis-starts-with-article diff --cc debian/u-boot-sunxi.substvars index 000000000,000000000..abd3ebebc new file mode 100644 --- /dev/null +++ b/debian/u-boot-sunxi.substvars @@@ -1,0 -1,0 +1,1 @@@ ++misc:Depends= diff --cc debian/u-boot-tegra.README.Debian index 000000000,000000000..83cc2228f new file mode 100644 --- /dev/null +++ b/debian/u-boot-tegra.README.Debian @@@ -1,0 -1,0 +1,16 @@@ ++== Installation == ++ ++At this point, you must install U-Boot to flash yourself from a host ++system using the Linux_For_Tegra tools. ++ ++sudo ./flash.sh -L /usr/lib/u-boot/jetson-tk1/u-boot-dtb-tegra.bin jetson-tk1 mmcblk1p1 ++ ++It seems that L4T R19.3.0 is currently required (image does not boot ++if flashed with L4T R21.X). ++ ++TODO: Figure out how to do this with tools within Debian, ++e.g. tegracrm and cbootimage. ++ ++== U-Boot environment tools == ++ ++fw_printenv / fw_setenv read /etc/fw_env.config for configuration. diff --cc debian/u-boot-tegra.install index 000000000,000000000..15b8ab96d new file mode 100755 --- /dev/null +++ b/debian/u-boot-tegra.install @@@ -1,0 -1,0 +1,2 @@@ ++#!/bin/sh ++debian/bin/u-boot-install-targets tegra diff --cc debian/u-boot-tegra.lintian-overrides index 000000000,000000000..3884f104a new file mode 100644 --- /dev/null +++ b/debian/u-boot-tegra.lintian-overrides @@@ -1,0 -1,0 +1,11 @@@ ++ ++# There are no file conflicts across architectures for u-boot, as each ++# target is only installed on a single architecture. In theory, some ++# targets could be built on multiple architectures, but could instead install ++# the package for the architecture needed. ++u-boot-tegra [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/jetson-tk1/uboot.elf ++ ++# These bootloaders need to be statically linked. ++u-boot-tegra [armhf]: statically-linked-binary usr/lib/u-boot/jetson-tk1/uboot.elf ++ ++u-boot-tegra: description-synopsis-starts-with-article diff --cc debian/u-boot-tools.install index 000000000,000000000..775539e6a new file mode 100755 --- /dev/null +++ b/debian/u-boot-tools.install @@@ -1,0 -1,0 +1,17 @@@ ++#!/bin/sh ++ ++builddir=debian/build/tools ++for tool in mkimage mkenvimage mksunxiboot kwboot env/fw_printenv ; do ++ echo ${builddir}/tools/${tool} /usr/bin/ ++done ++ ++echo doc/mkimage.1 /usr/share/man/man1/ ++ ++# manpages ++echo debian/manpages/fw_printenv.8 /usr/share/man/man8/ ++echo debian/manpages/fw_setenv.8 /usr/share/man/man8/ ++ ++# example env configs ++for env_config in debian/env-configs/*.config ; do ++ echo ${env_config} /usr/share/doc/u-boot-tools/examples/ ++done diff --cc debian/u-boot-tools.links index 000000000,000000000..92f5a6cbc new file mode 100644 --- /dev/null +++ b/debian/u-boot-tools.links @@@ -1,0 -1,0 +1,1 @@@ ++/usr/bin/fw_printenv /usr/bin/fw_setenv diff --cc debian/u-boot.README.Debian index 000000000,000000000..943b53df8 new file mode 100644 --- /dev/null +++ b/debian/u-boot.README.Debian @@@ -1,0 -1,0 +1,25 @@@ ++== Installation == ++ ++At this point, you must install U-Boot to flash yourself. ++ ++Some examples using mtd-utils: ++ ++SheevaPlug: ++ ++ sudo flash_erase /dev/mtd0 0 0 ++ sudo nandwrite -p /dev/mtd0 /usr/lib/u-boot/sheevaplug/u-boot.kwb ++ ++GuruPlug: ++ ++ sudo flash_erase /dev/mtd0 0 0 ++ sudo nandwrite -p /dev/mtd0 /usr/lib/u-boot/guruplug/u-boot.kwb ++ ++DreamPlug: ++ ++ At this point you cannot write to the SPI/NOR flash from Linux, ++ so you will need to replace U-Boot from within U-Boot. ++ ++== U-Boot environment tools == ++ ++fw_printenv / fw_setenv read /etc/fw_env.config for configuration. ++ diff --cc debian/u-boot.install index 000000000,000000000..aff6d5de5 new file mode 100755 --- /dev/null +++ b/debian/u-boot.install @@@ -1,0 -1,0 +1,2 @@@ ++#!/bin/sh ++debian/bin/u-boot-install-targets - diff --cc debian/u-boot.lintian-overrides index 000000000,000000000..9057bb92b new file mode 100644 --- /dev/null +++ b/debian/u-boot.lintian-overrides @@@ -1,0 -1,0 +1,27 @@@ ++ ++# There are no file conflicts across architectures for u-boot, as each ++# target is only installed on a single architecture. In theory, some ++# targets could be built on multiple architectures, but could instead install ++# the package for the architecture needed. ++u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/dockstar/uboot.elf ++u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/dreamplug/uboot.elf ++u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/guruplug/uboot.elf ++u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/rpi/uboot.elf ++u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/sheevaplug/uboot.elf ++u-boot [avr32]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/hammerhead/uboot.elf ++u-boot [mips]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/qemu_mips/uboot.elf ++u-boot [sh4]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/r2dplus/uboot.elf ++u-boot [sh4]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/sh7785lcr_32bit/uboot.elf ++ ++# These bootloaders need to be statically linked. ++u-boot [armel]: statically-linked-binary usr/lib/u-boot/dockstar/uboot.elf ++u-boot [armel]: statically-linked-binary usr/lib/u-boot/dreamplug/uboot.elf ++u-boot [armel]: statically-linked-binary usr/lib/u-boot/guruplug/uboot.elf ++u-boot [armel]: statically-linked-binary usr/lib/u-boot/rpi/uboot.elf ++u-boot [armel]: statically-linked-binary usr/lib/u-boot/sheevaplug/uboot.elf ++u-boot [avr32]: statically-linked-binary usr/lib/u-boot/hammerhead/uboot.elf ++u-boot [mips]: statically-linked-binary usr/lib/u-boot/qemu_mips/uboot.elf ++u-boot [sh4]: statically-linked-binary usr/lib/u-boot/r2dplus/uboot.elf ++u-boot [sh4]: statically-linked-binary usr/lib/u-boot/sh7785lcr_32bit/uboot.elf ++ ++u-boot: description-synopsis-starts-with-article diff --cc debian/watch index 000000000,000000000..c082c0e12 new file mode 100644 --- /dev/null +++ b/debian/watch @@@ -1,0 -1,0 +1,4 @@@ ++version=3 ++ ++opts=pasv,repacksuffix=+dfsg1,uversionmangle=s/-rc/~rc/g,dversionmangle=s/\+dfsg.*//g \ ++ftp://ftp.denx.de/pub/u-boot/u-boot-([\d\.].*)\.tar\.bz2