From: cl349@arcadians.cl.cam.ac.uk Date: Sun, 26 Dec 2004 10:00:51 +0000 (+0000) Subject: bitkeeper revision 1.1159.170.64 (41ce8bd3sGsiOUiBHp1KyOcLPmYBgQ) X-Git-Tag: archive/raspbian/4.8.0-1+rpi1~1^2~17926^2~49^2~2 X-Git-Url: https://dgit.raspbian.org/?a=commitdiff_plain;h=7ada6cd67ff7153ce85d48d00c1c56af1dd2055c;p=xen.git bitkeeper revision 1.1159.170.64 (41ce8bd3sGsiOUiBHp1KyOcLPmYBgQ) sync w/ head. --- 7ada6cd67ff7153ce85d48d00c1c56af1dd2055c diff --cc linux-2.6.10-rc3-xen-sparse/arch/xen/configs/xen0_defconfig index 98cbd2fdbf,0000000000..d3ff092e5e mode 100644,000000..100644 --- a/linux-2.6.10-rc3-xen-sparse/arch/xen/configs/xen0_defconfig +++ b/linux-2.6.10-rc3-xen-sparse/arch/xen/configs/xen0_defconfig @@@ -1,1042 -1,0 +1,1050 @@@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.10-rc2-xen0 - # Wed Dec 1 09:22:49 2004 ++# Thu Dec 23 14:01:43 2004 +# +CONFIG_XEN=y +CONFIG_ARCH_XEN=y +CONFIG_NO_IDLE_HZ=y + +# +# XEN +# +CONFIG_XEN_PRIVILEGED_GUEST=y +CONFIG_XEN_PHYSDEV_ACCESS=y +CONFIG_XEN_BLKDEV_BACKEND=y +CONFIG_XEN_NETDEV_BACKEND=y +CONFIG_XEN_BLKDEV_FRONTEND=y +CONFIG_XEN_NETDEV_FRONTEND=y +# CONFIG_XEN_NETDEV_FRONTEND_PIPELINED_TRANSMITTER is not set +CONFIG_XEN_WRITABLE_PAGETABLES=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y +CONFIG_X86=y +# CONFIG_X86_64 is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# X86 Processor Configuration +# +CONFIG_XENARCH="i386" +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y ++# CONFIG_M386 is not set ++# CONFIG_M486 is not set ++# CONFIG_M586 is not set ++# CONFIG_M586TSC is not set ++# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +CONFIG_MPENTIUM4=y +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set ++# CONFIG_MWINCHIPC6 is not set ++# CONFIG_MWINCHIP2 is not set ++# CONFIG_MWINCHIP3D is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_CMPXCHG=y +CONFIG_X86_XADD=y +CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_INVLPG=y +CONFIG_X86_BSWAP=y +CONFIG_X86_POPAD_OK=y +CONFIG_X86_GOOD_APIC=y +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +# CONFIG_HPET_TIMER is not set +# CONFIG_HPET_EMULATE_RTC is not set +# CONFIG_SMP is not set +CONFIG_PREEMPT=y +CONFIG_X86_CPUID=y + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +CONFIG_NOHIGHMEM=y +# CONFIG_HIGHMEM4G is not set +CONFIG_MTRR=y +CONFIG_HAVE_DEC_LOCK=y +# CONFIG_REGPARM is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_PCI=y +CONFIG_PCI_DIRECT=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_NAMES is not set +CONFIG_ISA=y +# CONFIG_EISA is not set +# CONFIG_MCA is not set +# CONFIG_SCx200 is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# +CONFIG_PCMCIA_PROBE=y + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_SLAB=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_PAGEALLOC=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_4KSTACKS is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_PC=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_XD is not set +# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_CPQ_CISS_DA=y +# CONFIG_CISS_SCSI_TAPE is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_HD_IDE is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_CMD640 is not set +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_RZ1000 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +CONFIG_BLK_DEV_SVWKS=y +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +# CONFIG_IDE_CHIPSETS is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set + +# +# SCSI low-level drivers +# +CONFIG_BLK_DEV_3W_XXXX_RAID=y +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +CONFIG_SCSI_AACRAID=y +CONFIG_SCSI_AIC7XXX=y +CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 +CONFIG_AIC7XXX_RESET_DELAY_MS=15000 +CONFIG_AIC7XXX_DEBUG_ENABLE=y +CONFIG_AIC7XXX_DEBUG_MASK=0 +CONFIG_AIC7XXX_REG_PRETTY_PRINT=y +# CONFIG_SCSI_AIC7XXX_OLD is not set +CONFIG_SCSI_AIC79XX=y +CONFIG_AIC79XX_CMDS_PER_DEVICE=32 +CONFIG_AIC79XX_RESET_DELAY_MS=15000 +# CONFIG_AIC79XX_ENABLE_RD_STRM is not set +CONFIG_AIC79XX_DEBUG_ENABLE=y +CONFIG_AIC79XX_DEBUG_MASK=0 +CONFIG_AIC79XX_REG_PRETTY_PRINT=y +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +CONFIG_SCSI_ATA_PIIX=y +# CONFIG_SCSI_SATA_NV is not set +CONFIG_SCSI_SATA_PROMISE=y +CONFIG_SCSI_SATA_SX4=y +CONFIG_SCSI_SATA_SIL=y +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +CONFIG_SCSI_BUSLOGIC=y +# CONFIG_SCSI_OMIT_FLASHPOINT is not set +# CONFIG_SCSI_CPQFCTS is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_EATA_PIO is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PCI2000 is not set +# CONFIG_SCSI_PCI2220I is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_ISP is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLOGIC_1280_1040 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_SEAGATE is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_ULTRASTOR is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID5=y +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_CRYPT is not set +CONFIG_DM_SNAPSHOT=y +CONFIG_DM_MIRROR=y +# CONFIG_DM_ZERO is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +# CONFIG_IP_NF_IRC is not set +# CONFIG_IP_NF_TFTP is not set +# CONFIG_IP_NF_AMANDA is not set +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_LIMIT is not set +# CONFIG_IP_NF_MATCH_IPRANGE is not set +# CONFIG_IP_NF_MATCH_MAC is not set +# CONFIG_IP_NF_MATCH_PKTTYPE is not set +# CONFIG_IP_NF_MATCH_MARK is not set +# CONFIG_IP_NF_MATCH_MULTIPORT is not set +# CONFIG_IP_NF_MATCH_TOS is not set +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_DSCP is not set +# CONFIG_IP_NF_MATCH_AH_ESP is not set +# CONFIG_IP_NF_MATCH_LENGTH is not set +# CONFIG_IP_NF_MATCH_TTL is not set +# CONFIG_IP_NF_MATCH_TCPMSS is not set +# CONFIG_IP_NF_MATCH_HELPER is not set +# CONFIG_IP_NF_MATCH_STATE is not set +# CONFIG_IP_NF_MATCH_CONNTRACK is not set +# CONFIG_IP_NF_MATCH_OWNER is not set +# CONFIG_IP_NF_MATCH_PHYSDEV is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_COMMENT is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +# CONFIG_IP_NF_FILTER is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_IP_NF_TARGET_TCPMSS is not set +# CONFIG_IP_NF_NAT is not set +# CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_NF_COMPAT_IPCHAINS is not set +# CONFIG_IP_NF_COMPAT_IPFWADM is not set + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=y +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +CONFIG_NET_VENDOR_3COM=y +# CONFIG_EL1 is not set +# CONFIG_EL2 is not set +# CONFIG_ELPLUS is not set +# CONFIG_EL16 is not set +# CONFIG_EL3 is not set +# CONFIG_3C515 is not set +CONFIG_VORTEX=y +# CONFIG_TYPHOON is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NET_VENDOR_RACAL is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=y +# CONFIG_TULIP_MWI is not set +# CONFIG_TULIP_MMIO is not set +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_E100_NAPI is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +CONFIG_VIA_RHINE=y +# CONFIG_VIA_RHINE_MMIO is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=y +# CONFIG_ACENIC_OMIT_TIGON_I is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_SONYPI is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_FTAPE is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_MWAVE is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# +# CONFIG_IBM_ASM is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set +# CONFIG_VIDEO_SELECT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES_586 is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_TEST is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y diff --cc linux-2.6.10-rc3-xen-sparse/arch/xen/configs/xenU_defconfig index 2512c79cb1,0000000000..0e7dc0a3b3 mode 100644,000000..100644 --- a/linux-2.6.10-rc3-xen-sparse/arch/xen/configs/xenU_defconfig +++ b/linux-2.6.10-rc3-xen-sparse/arch/xen/configs/xenU_defconfig @@@ -1,510 -1,0 +1,518 @@@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.10-rc2-xenU - # Wed Dec 1 09:22:09 2004 ++# Thu Dec 23 14:02:24 2004 +# +CONFIG_XEN=y +CONFIG_ARCH_XEN=y +CONFIG_NO_IDLE_HZ=y + +# +# XEN +# +# CONFIG_XEN_PRIVILEGED_GUEST is not set +# CONFIG_XEN_PHYSDEV_ACCESS is not set +# CONFIG_XEN_BLKDEV_BACKEND is not set +# CONFIG_XEN_NETDEV_BACKEND is not set +CONFIG_XEN_BLKDEV_FRONTEND=y +CONFIG_XEN_NETDEV_FRONTEND=y +# CONFIG_XEN_NETDEV_FRONTEND_PIPELINED_TRANSMITTER is not set +CONFIG_XEN_WRITABLE_PAGETABLES=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y +CONFIG_X86=y +# CONFIG_X86_64 is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# X86 Processor Configuration +# +CONFIG_XENARCH="i386" +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y ++# CONFIG_M386 is not set ++# CONFIG_M486 is not set ++# CONFIG_M586 is not set ++# CONFIG_M586TSC is not set ++# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +CONFIG_MPENTIUM4=y +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set ++# CONFIG_MWINCHIPC6 is not set ++# CONFIG_MWINCHIP2 is not set ++# CONFIG_MWINCHIP3D is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_CMPXCHG=y +CONFIG_X86_XADD=y +CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_INVLPG=y +CONFIG_X86_BSWAP=y +CONFIG_X86_POPAD_OK=y +CONFIG_X86_GOOD_APIC=y +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +# CONFIG_HPET_TIMER is not set +# CONFIG_HPET_EMULATE_RTC is not set +# CONFIG_SMP is not set +CONFIG_PREEMPT=y +CONFIG_X86_CPUID=y + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +CONFIG_NOHIGHMEM=y +# CONFIG_HIGHMEM4G is not set +CONFIG_HAVE_DEC_LOCK=y +# CONFIG_REGPARM is not set + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_SLAB=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_PAGEALLOC=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_4KSTACKS is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_PC=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y + +# +# SCSI device support +# +CONFIG_SCSI=m +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_QLOGIC_1280_1040 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +CONFIG_UNIX98_PTYS=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +CONFIG_DEVPTS_FS_XATTR=y +# CONFIG_DEVPTS_FS_SECURITY is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +# CONFIG_EXPORTFS is not set +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES_586 is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_TEST is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC32 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y diff --cc linux-2.6.10-rc3-xen-sparse/arch/xen/i386/Kconfig index d58f91fbd3,0000000000..f34d271ff6 mode 100644,000000..100644 --- a/linux-2.6.10-rc3-xen-sparse/arch/xen/i386/Kconfig +++ b/linux-2.6.10-rc3-xen-sparse/arch/xen/i386/Kconfig @@@ -1,956 -1,0 +1,956 @@@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# + +menu "X86 Processor Configuration" + +config XENARCH + string + default i386 + +config MMU + bool + default y + +config SBUS + bool + +config UID16 + bool + default y + +config GENERIC_ISA_DMA + bool + default y + +config GENERIC_IOMAP + bool + default y + +choice + prompt "Processor family" + default M686 + - #config M386 - # bool "386" - # ---help--- - # This is the processor type of your CPU. This information is used for - # optimizing purposes. In order to compile a kernel that can run on - # all x86 CPU types (albeit not optimally fast), you can specify - # "386" here. - # - # The kernel will not necessarily run on earlier architectures than - # the one you have chosen, e.g. a Pentium optimized kernel will run on - # a PPro, but not necessarily on a i486. - # - # Here are the settings recommended for greatest speed: - # - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI - # 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels - # will run on a 386 class machine. - # - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or - # SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. - # - "586" for generic Pentium CPUs lacking the TSC - # (time stamp counter) register. - # - "Pentium-Classic" for the Intel Pentium. - # - "Pentium-MMX" for the Intel Pentium MMX. - # - "Pentium-Pro" for the Intel Pentium Pro. - # - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron. - # - "Pentium-III" for the Intel Pentium III or Coppermine Celeron. - # - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron. - # - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D). - # - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird). - # - "Crusoe" for the Transmeta Crusoe series. ++config M386 ++ bool "386" ++ ---help--- ++ This is the processor type of your CPU. This information is used for ++ optimizing purposes. In order to compile a kernel that can run on ++ all x86 CPU types (albeit not optimally fast), you can specify ++ "386" here. ++ ++ The kernel will not necessarily run on earlier architectures than ++ the one you have chosen, e.g. a Pentium optimized kernel will run on ++ a PPro, but not necessarily on a i486. ++ ++ Here are the settings recommended for greatest speed: ++ - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI ++ 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels ++ will run on a 386 class machine. ++ - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or ++ SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. ++ - "586" for generic Pentium CPUs lacking the TSC ++ (time stamp counter) register. ++ - "Pentium-Classic" for the Intel Pentium. ++ - "Pentium-MMX" for the Intel Pentium MMX. ++ - "Pentium-Pro" for the Intel Pentium Pro. ++ - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron. ++ - "Pentium-III" for the Intel Pentium III or Coppermine Celeron. ++ - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron. ++ - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D). ++ - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird). ++ - "Crusoe" for the Transmeta Crusoe series. +# - "Efficeon" for the Transmeta Efficeon series. - # - "Winchip-C6" for original IDT Winchip. - # - "Winchip-2" for IDT Winchip 2. - # - "Winchip-2A" for IDT Winchips with 3dNow! capabilities. - # - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. - # - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above). - # - # If you don't know what to do, choose "386". - - #config M486 - # bool "486" - # help - # Select this for a 486 series processor, either Intel or one of the - # compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX, - # DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or - # U5S. - - #config M586 - # bool "586/K5/5x86/6x86/6x86MX" - # help - # Select this for an 586 or 686 series processor such as the AMD K5, - # the Intel 5x86 or 6x86, or the Intel 6x86MX. This choice does not - # assume the RDTSC (Read Time Stamp Counter) instruction. - - #config M586TSC - # bool "Pentium-Classic" - # help - # Select this for a Pentium Classic processor with the RDTSC (Read - # Time Stamp Counter) instruction for benchmarking. - - #config M586MMX - # bool "Pentium-MMX" - # help - # Select this for a Pentium with the MMX graphics/multimedia - # extended instructions. ++ - "Winchip-C6" for original IDT Winchip. ++ - "Winchip-2" for IDT Winchip 2. ++ - "Winchip-2A" for IDT Winchips with 3dNow! capabilities. ++ - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. ++ - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above). ++ ++ If you don't know what to do, choose "386". ++ ++config M486 ++ bool "486" ++ help ++ Select this for a 486 series processor, either Intel or one of the ++ compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX, ++ DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or ++ U5S. ++ ++config M586 ++ bool "586/K5/5x86/6x86/6x86MX" ++ help ++ Select this for an 586 or 686 series processor such as the AMD K5, ++ the Intel 5x86 or 6x86, or the Intel 6x86MX. This choice does not ++ assume the RDTSC (Read Time Stamp Counter) instruction. ++ ++config M586TSC ++ bool "Pentium-Classic" ++ help ++ Select this for a Pentium Classic processor with the RDTSC (Read ++ Time Stamp Counter) instruction for benchmarking. ++ ++config M586MMX ++ bool "Pentium-MMX" ++ help ++ Select this for a Pentium with the MMX graphics/multimedia ++ extended instructions. + +config M686 + bool "Pentium-Pro" + help + Select this for Intel Pentium Pro chips. This enables the use of + Pentium Pro extended instructions, and disables the init-time guard + against the f00f bug found in earlier Pentiums. + +config MPENTIUMII + bool "Pentium-II/Celeron(pre-Coppermine)" + help + Select this for Intel chips based on the Pentium-II and + pre-Coppermine Celeron core. This option enables an unaligned + copy optimization, compiles the kernel with optimization flags + tailored for the chip, and applies any applicable Pentium Pro + optimizations. + +config MPENTIUMIII + bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon" + help + Select this for Intel chips based on the Pentium-III and + Celeron-Coppermine core. This option enables use of some + extended prefetch instructions in addition to the Pentium II + extensions. + +config MPENTIUMM + bool "Pentium M" + help + Select this for Intel Pentium M (not Pentium-4 M) + notebook chips. + +config MPENTIUM4 + bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon" + help + Select this for Intel Pentium 4 chips. This includes the + Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M + (not Pentium M) chips. This option enables compile flags + optimized for the chip, uses the correct cache shift, and + applies any applicable Pentium III optimizations. + +config MK6 + bool "K6/K6-II/K6-III" + help + Select this for an AMD K6-family processor. Enables use of + some extended instructions, and passes appropriate optimization + flags to GCC. + +config MK7 + bool "Athlon/Duron/K7" + help + Select this for an AMD Athlon K7-family processor. Enables use of + some extended instructions, and passes appropriate optimization + flags to GCC. + +config MK8 + bool "Opteron/Athlon64/Hammer/K8" + help + Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables + use of some extended instructions, and passes appropriate optimization + flags to GCC. + +config MCRUSOE + bool "Crusoe" + help + Select this for a Transmeta Crusoe processor. Treats the processor + like a 586 with TSC, and sets some GCC optimization flags (like a + Pentium Pro with no alignment requirements). + - #config MEFFICEON - # bool "Efficeon" - # help - # Select this for a Transmeta Efficeon processor. - - #config MWINCHIPC6 - # bool "Winchip-C6" - # help - # Select this for an IDT Winchip C6 chip. Linux and GCC - # treat this chip as a 586TSC with some extended instructions - # and alignment requirements. - - #config MWINCHIP2 - # bool "Winchip-2" - # help - # Select this for an IDT Winchip-2. Linux and GCC - # treat this chip as a 586TSC with some extended instructions - # and alignment requirements. - - #config MWINCHIP3D - # bool "Winchip-2A/Winchip-3" - # help - # Select this for an IDT Winchip-2A or 3. Linux and GCC - # treat this chip as a 586TSC with some extended instructions - # and alignment reqirements. Also enable out of order memory - # stores for this CPU, which can increase performance of some - # operations. ++config MEFFICEON ++ bool "Efficeon" ++ help ++ Select this for a Transmeta Efficeon processor. ++ ++config MWINCHIPC6 ++ bool "Winchip-C6" ++ help ++ Select this for an IDT Winchip C6 chip. Linux and GCC ++ treat this chip as a 586TSC with some extended instructions ++ and alignment requirements. ++ ++config MWINCHIP2 ++ bool "Winchip-2" ++ help ++ Select this for an IDT Winchip-2. Linux and GCC ++ treat this chip as a 586TSC with some extended instructions ++ and alignment requirements. ++ ++config MWINCHIP3D ++ bool "Winchip-2A/Winchip-3" ++ help ++ Select this for an IDT Winchip-2A or 3. Linux and GCC ++ treat this chip as a 586TSC with some extended instructions ++ and alignment reqirements. Also enable out of order memory ++ stores for this CPU, which can increase performance of some ++ operations. + +config MCYRIXIII + bool "CyrixIII/VIA-C3" + help + Select this for a Cyrix III or C3 chip. Presently Linux and GCC + treat this chip as a generic 586. Whilst the CPU is 686 class, + it lacks the cmov extension which gcc assumes is present when + generating 686 code. + Note that Nehemiah (Model 9) and above will not boot with this + kernel due to them lacking the 3DNow! instructions used in earlier + incarnations of the CPU. + +config MVIAC3_2 + bool "VIA C3-2 (Nehemiah)" + help + Select this for a VIA C3 "Nehemiah". Selecting this enables usage + of SSE and tells gcc to treat the CPU as a 686. + Note, this kernel will not boot on older (pre model 9) C3s. + +endchoice + +config X86_GENERIC + bool "Generic x86 support" + help + Instead of just including optimizations for the selected + x86 variant (e.g. PII, Crusoe or Athlon), include some more + generic optimizations as well. This will make the kernel + perform better on x86 CPUs other than that selected. + + This is really intended for distributors who need more + generic optimizations. + +# +# Define implied options from the CPU selection here +# +config X86_CMPXCHG + bool + depends on !M386 + default y + +config X86_XADD + bool + depends on !M386 + default y + +config X86_L1_CACHE_SHIFT + int + default "7" if MPENTIUM4 || X86_GENERIC + default "4" if X86_ELAN || M486 || M386 + default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 + default "6" if MK7 || MK8 || MPENTIUMM + +config RWSEM_GENERIC_SPINLOCK + bool + depends on M386 + default y + +config RWSEM_XCHGADD_ALGORITHM + bool + depends on !M386 + default y + +config X86_PPRO_FENCE + bool + depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 + default y + +config X86_F00F_BUG + bool + depends on M586MMX || M586TSC || M586 || M486 || M386 + default y + +config X86_WP_WORKS_OK + bool + depends on !M386 + default y + +config X86_INVLPG + bool + depends on !M386 + default y + +config X86_BSWAP + bool + depends on !M386 + default y + +config X86_POPAD_OK + bool + depends on !M386 + default y + +config X86_ALIGNMENT_16 + bool + depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 + default y + +config X86_GOOD_APIC + bool + depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON + default y + +config X86_INTEL_USERCOPY + bool + depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON + default y + +config X86_USE_PPRO_CHECKSUM + bool + depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON + default y + +config X86_USE_3DNOW + bool + depends on MCYRIXIII || MK7 + default y + +config X86_OOSTORE + bool + depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR + default y + +config HPET_TIMER + bool + default n +#config HPET_TIMER +# bool "HPET Timer Support" +# help +# This enables the use of the HPET for the kernel's internal timer. +# HPET is the next generation timer replacing legacy 8254s. +# You can safely choose Y here. However, HPET will only be +# activated if the platform and the BIOS support this feature. +# Otherwise the 8254 will be used for timing services. +# +# Choose N to continue using the legacy 8254 timer. + +config HPET_EMULATE_RTC + def_bool HPET_TIMER && RTC=y + +config SMP + bool + default n +#config SMP +# bool "Symmetric multi-processing support" +# ---help--- +# This enables support for systems with more than one CPU. If you have +# a system with only one CPU, like most personal computers, say N. If +# you have a system with more than one CPU, say Y. +# +# If you say N here, the kernel will run on single and multiprocessor +# machines, but will use only one CPU of a multiprocessor machine. If +# you say Y here, the kernel will run on many, but not all, +# singleprocessor machines. On a singleprocessor machine, the kernel +# will run faster if you say N here. +# +# Note that if you say Y here and choose architecture "586" or +# "Pentium" under "Processor family", the kernel will not work on 486 +# architectures. Similarly, multiprocessor kernels for the "PPro" +# architecture may not work on all Pentium based boards. +# +# People using multiprocessor machines who say Y here should also say +# Y to "Enhanced Real Time Clock Support", below. The "Advanced Power +# Management" code will be disabled if you say Y here. +# +# See also the , +# , +# and the SMP-HOWTO available at +# . +# +# If you don't know what to do here, say N. + +config NR_CPUS + int "Maximum number of CPUs (2-255)" + range 2 255 + depends on SMP + default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000 + default "8" + help + This allows you to specify the maximum number of CPUs which this + kernel will support. The maximum supported value is 255 and the + minimum value which makes sense is 2. + + This is purely to save memory - each supported CPU adds + approximately eight kilobytes to the kernel image. + +config SCHED_SMT + bool "SMT (Hyperthreading) scheduler support" + depends on SMP + default off + help + SMT scheduler support improves the CPU scheduler's decision making + when dealing with Intel Pentium 4 chips with HyperThreading at a + cost of slightly increased overhead in some places. If unsure say + N here. + +config PREEMPT + bool "Preemptible Kernel" + help + This option reduces the latency of the kernel when reacting to + real-time or interactive events by allowing a low priority process to + be preempted even if it is in kernel mode executing a system call. + This allows applications to run more reliably even when the system is + under load. + + Say Y here if you are building a kernel for a desktop, embedded + or real-time system. Say N if you are unsure. + +#config X86_TSC +# bool +# depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2) && !X86_NUMAQ +# default y + +#config X86_MCE +# bool "Machine Check Exception" +# depends on !X86_VOYAGER +# ---help--- +# Machine Check Exception support allows the processor to notify the +# kernel if it detects a problem (e.g. overheating, component failure). +# The action the kernel takes depends on the severity of the problem, +# ranging from a warning message on the console, to halting the machine. +# Your processor must be a Pentium or newer to support this - check the +# flags in /proc/cpuinfo for mce. Note that some older Pentium systems +# have a design flaw which leads to false MCE events - hence MCE is +# disabled on all P5 processors, unless explicitly enabled with "mce" +# as a boot argument. Similarly, if MCE is built in and creates a +# problem on some new non-standard machine, you can boot with "nomce" +# to disable it. MCE support simply ignores non-MCE processors like +# the 386 and 486, so nearly everyone can say Y here. + +#config X86_MCE_NONFATAL +# tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4" +# depends on X86_MCE +# help +# Enabling this feature starts a timer that triggers every 5 seconds which +# will look at the machine check registers to see if anything happened. +# Non-fatal problems automatically get corrected (but still logged). +# Disable this if you don't want to see these messages. +# Seeing the messages this option prints out may be indicative of dying hardware, +# or out-of-spec (ie, overclocked) hardware. +# This option only does something on certain CPUs. +# (AMD Athlon/Duron and Intel Pentium 4) + +#config X86_MCE_P4THERMAL +# bool "check for P4 thermal throttling interrupt." +# depends on X86_MCE && (X86_UP_APIC || SMP) +# help +# Enabling this feature will cause a message to be printed when the P4 +# enters thermal throttling. + +#config MICROCODE +# tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support" +# ---help--- +# If you say Y here and also to "/dev file system support" in the +# 'File systems' section, you will be able to update the microcode on +# Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II, +# Pentium III, Pentium 4, Xeon etc. You will obviously need the +# actual microcode binary data itself which is not shipped with the +# Linux kernel. +# +# For latest news and information on obtaining all the required +# ingredients for this driver, check: +# . +# +# To compile this driver as a module, choose M here: the +# module will be called microcode. + +#config X86_MSR +# tristate "/dev/cpu/*/msr - Model-specific register support" +# help +# This device gives privileged processes access to the x86 +# Model-Specific Registers (MSRs). It is a character device with +# major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr. +# MSR accesses are directed to a specific CPU on multi-processor +# systems. + +config X86_CPUID + tristate "/dev/cpu/*/cpuid - CPU information support" + help + This device gives processes access to the x86 CPUID instruction to + be executed on a specific processor. It is a character device + with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to + /dev/cpu/31/cpuid. + +source "drivers/firmware/Kconfig" + +choice + prompt "High Memory Support" + default NOHIGHMEM + +config NOHIGHMEM + bool "off" + ---help--- + Linux can use up to 64 Gigabytes of physical memory on x86 systems. + However, the address space of 32-bit x86 processors is only 4 + Gigabytes large. That means that, if you have a large amount of + physical memory, not all of it can be "permanently mapped" by the + kernel. The physical memory that's not permanently mapped is called + "high memory". + + If you are compiling a kernel which will never run on a machine with + more than 1 Gigabyte total physical RAM, answer "off" here (default + choice and suitable for most users). This will result in a "3GB/1GB" + split: 3GB are mapped so that each process sees a 3GB virtual memory + space and the remaining part of the 4GB virtual memory space is used + by the kernel to permanently map as much physical memory as + possible. + + If the machine has between 1 and 4 Gigabytes physical RAM, then + answer "4GB" here. + + If more than 4 Gigabytes is used then answer "64GB" here. This + selection turns Intel PAE (Physical Address Extension) mode on. + PAE implements 3-level paging on IA32 processors. PAE is fully + supported by Linux, PAE mode is implemented on all recent Intel + processors (Pentium Pro and better). NOTE: If you say "64GB" here, + then the kernel will not boot on CPUs that don't support PAE! + + The actual amount of total physical memory will either be + auto detected or can be forced by using a kernel command line option + such as "mem=256M". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + + If unsure, say "off". + +config HIGHMEM4G + bool "4GB" + help + Select this if you have a 32-bit processor and between 1 and 4 + gigabytes of physical RAM. + +#config HIGHMEM64G +# bool "64GB" +# help +# Select this if you have a 32-bit processor and more than 4 +# gigabytes of physical RAM. + +endchoice + +config HIGHMEM + bool + depends on HIGHMEM64G || HIGHMEM4G + default y + +config X86_PAE + bool + depends on HIGHMEM64G + default y + +# Common NUMA Features +config NUMA + bool "Numa Memory Allocation and Scheduler Support" + depends on SMP && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || (X86_SUMMIT && ACPI)) + default n if X86_PC + default y if (X86_NUMAQ || X86_SUMMIT) + +# Need comments to help the hapless user trying to turn on NUMA support +comment "NUMA (NUMA-Q) requires SMP, 64GB highmem support" + depends on X86_NUMAQ && (!HIGHMEM64G || !SMP) + +comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" + depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI) + +config DISCONTIGMEM + bool + depends on NUMA + default y + +config HAVE_ARCH_BOOTMEM_NODE + bool + depends on NUMA + default y + +#config HIGHPTE +# bool "Allocate 3rd-level pagetables from highmem" +# depends on HIGHMEM4G || HIGHMEM64G +# help +# The VM uses one page table entry for each page of physical memory. +# For systems with a lot of RAM, this can be wasteful of precious +# low memory. Setting this option will put user-space page table +# entries in high memory. + +config MTRR + bool + depends on XEN_PRIVILEGED_GUEST + default y + +#config MTRR +# bool "MTRR (Memory Type Range Register) support" +# ---help--- +# On Intel P6 family processors (Pentium Pro, Pentium II and later) +# the Memory Type Range Registers (MTRRs) may be used to control +# processor access to memory ranges. This is most useful if you have +# a video (VGA) card on a PCI or AGP bus. Enabling write-combining +# allows bus write transfers to be combined into a larger transfer +# before bursting over the PCI/AGP bus. This can increase performance +# of image write operations 2.5 times or more. Saying Y here creates a +# /proc/mtrr file which may be used to manipulate your processor's +# MTRRs. Typically the X server should use this. +# +# This code has a reasonably generic interface so that similar +# control registers on other processors can be easily supported +# as well: +# +# The Cyrix 6x86, 6x86MX and M II processors have Address Range +# Registers (ARRs) which provide a similar functionality to MTRRs. For +# these, the ARRs are used to emulate the MTRRs. +# The AMD K6-2 (stepping 8 and above) and K6-3 processors have two +# MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing +# write-combining. All of these processors are supported by this code +# and it makes sense to say Y here if you have one of them. +# +# Saying Y here also fixes a problem with buggy SMP BIOSes which only +# set the MTRRs for the boot CPU and not for the secondary CPUs. This +# can lead to all sorts of problems, so it's good to say Y here. +# +# You can safely say Y even if your machine doesn't have MTRRs, you'll +# just add about 9 KB to your kernel. +# +# See for more information. + +config IRQBALANCE + bool "Enable kernel irq balancing" + depends on SMP && X86_IO_APIC + default y + help + The default yes will allow the kernel to do irq load balancing. + Saying no will keep the kernel from doing irq load balancing. + +config HAVE_DEC_LOCK + bool + depends on (SMP || PREEMPT) && X86_CMPXCHG + default y + +# turning this on wastes a bunch of space. +# Summit needs it only when NUMA is on +config BOOT_IOREMAP + bool + depends on (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI)) + default y + +config REGPARM + bool "Use register arguments (EXPERIMENTAL)" + depends on EXPERIMENTAL + default n + help + Compile the kernel with -mregparm=3. This uses an different ABI + and passes the first three arguments of a function call in registers. + This will probably break binary only modules. + + This feature is only enabled for gcc-3.0 and later - earlier compilers + generate incorrect output with certain kernel constructs when + -mregparm=3 is used. + + +if XEN_PHYSDEV_ACCESS + +menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" + +config X86_VISWS_APIC + bool + depends on X86_VISWS + default y + +config X86_LOCAL_APIC + bool + depends on (X86_VISWS || SMP) && !X86_VOYAGER + default y + +config X86_IO_APIC + bool + depends on SMP && !(X86_VISWS || X86_VOYAGER) + default y + +config PCI + bool "PCI support" if !X86_VISWS + depends on !X86_VOYAGER + default y if X86_VISWS + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or + VESA. If you have PCI, say Y, otherwise N. + + The PCI-HOWTO, available from + , contains valuable + information about which PCI hardware does work under Linux and which + doesn't. + +#choice +# prompt "PCI access mode" +# depends on PCI && !X86_VISWS +# default PCI_GOANY +# ---help--- +# On PCI systems, the BIOS can be used to detect the PCI devices and +# determine their configuration. However, some old PCI motherboards +# have BIOS bugs and may crash if this is done. Also, some embedded +# PCI-based systems don't have any BIOS at all. Linux can also try to +# detect the PCI hardware directly without using the BIOS. +# +# With this option, you can specify how Linux should detect the +# PCI devices. If you choose "BIOS", the BIOS will be used, +# if you choose "Direct", the BIOS won't be used, and if you +# choose "MMConfig", then PCI Express MMCONFIG will be used. +# If you choose "Any", the kernel will try MMCONFIG, then the +# direct access method and falls back to the BIOS if that doesn't +# work. If unsure, go with the default, which is "Any". +# +#config PCI_GOBIOS +# bool "BIOS" +# +#config PCI_GOMMCONFIG +# bool "MMConfig" +# +#config PCI_GODIRECT +# bool "Direct" +# +#config PCI_GOANY +# bool "Any" +# +#endchoice +# +#config PCI_BIOS +# bool +# depends on !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY) +# default y +# +#config PCI_DIRECT +# bool +# depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS) +# default y + +config PCI_DIRECT + bool + depends on PCI + default y + +source "drivers/pci/Kconfig" + +config ISA + bool "ISA support" + depends on !(X86_VOYAGER || X86_VISWS) + help + Find out whether you have ISA slots on your motherboard. ISA is the + name of a bus system, i.e. the way the CPU talks to the other stuff + inside your box. Other bus systems are PCI, EISA, MicroChannel + (MCA) or VESA. ISA is an older system, now being displaced by PCI; + newer boards don't support it. If you have ISA, say Y, otherwise N. + +config EISA + bool "EISA support" + depends on ISA + ---help--- + The Extended Industry Standard Architecture (EISA) bus was + developed as an open alternative to the IBM MicroChannel bus. + + The EISA bus provided some of the features of the IBM MicroChannel + bus while maintaining backward compatibility with cards made for + the older ISA bus. The EISA bus saw limited use between 1988 and + 1995 when it was made obsolete by the PCI bus. + + Say Y here if you are building a kernel for an EISA-based machine. + + Otherwise, say N. + +source "drivers/eisa/Kconfig" + +config MCA + bool "MCA support" + depends on !(X86_VISWS || X86_VOYAGER) + help + MicroChannel Architecture is found in some IBM PS/2 machines and + laptops. It is a bus system similar to PCI or ISA. See + (and especially the web page given + there) before attempting to build an MCA bus kernel. + +config MCA + depends on X86_VOYAGER + default y if X86_VOYAGER + +source "drivers/mca/Kconfig" + +config SCx200 + tristate "NatSemi SCx200 support" + depends on !X86_VOYAGER + help + This provides basic support for the National Semiconductor SCx200 + processor. Right now this is just a driver for the GPIO pins. + + If you don't know what to do here, say N. + + This support is also available as a module. If compiled as a + module, it will be called scx200. + +source "drivers/pcmcia/Kconfig" + +source "drivers/pci/hotplug/Kconfig" + +endmenu + +endif + +menu "Kernel hacking" + +config DEBUG_KERNEL + bool "Kernel debugging" + help + Say Y here if you are developing drivers or trying to debug and + identify kernel problems. + +config EARLY_PRINTK + bool "Early printk" if EMBEDDED + default y + help + Write kernel log output directly into the VGA buffer or to a serial + port. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation + it is not recommended because it looks ugly and doesn't cooperate + with klogd/syslogd or the X server. You should normally N here, + unless you want to debug such a crash. + +config DEBUG_STACKOVERFLOW + bool "Check for stack overflows" + depends on DEBUG_KERNEL + +config DEBUG_STACK_USAGE + bool "Stack utilization instrumentation" + depends on DEBUG_KERNEL + help + Enables the display of the minimum amount of free stack which each + task has ever had available in the sysrq-T and sysrq-P debug output. + + This option will slow down process creation somewhat. + +config DEBUG_SLAB + bool "Debug memory allocations" + depends on DEBUG_KERNEL + help + Say Y here to have the kernel do limited verification on memory + allocation as well as poisoning memory on free to catch use of freed + memory. + +config MAGIC_SYSRQ + bool "Magic SysRq key" + depends on DEBUG_KERNEL + help + If you say Y here, you will have some control over the system even + if the system crashes for example during kernel debugging (e.g., you + will be able to flush the buffer cache to disk, reboot the system + immediately or dump some status information). This is accomplished + by pressing various keys while holding SysRq (Alt+PrintScreen). It + also works on a serial console (on PC hardware at least), if you + send a BREAK and then within 5 seconds a command keypress. The + keys are documented in . Don't say Y + unless you really know what this hack does. + +config DEBUG_SPINLOCK + bool "Spinlock debugging" + depends on DEBUG_KERNEL + help + Say Y here and build SMP to catch missing spinlock initialization + and certain other kinds of spinlock errors commonly made. This is + best used in conjunction with the NMI watchdog so that spinlock + deadlocks are also debuggable. + +config DEBUG_PAGEALLOC + bool "Page alloc debugging" + depends on DEBUG_KERNEL + help + Unmap pages from the kernel linear mapping after free_pages(). + This results in a large slowdown, but helps to find certain types + of memory corruptions. + +config DEBUG_HIGHMEM + bool "Highmem debugging" + depends on DEBUG_KERNEL && HIGHMEM + help + This options enables addition error checking for high memory systems. + Disable for production systems. + +config DEBUG_INFO + bool "Compile the kernel with debug info" + depends on DEBUG_KERNEL + help + If you say Y here the resulting kernel image will include + debugging info resulting in a larger kernel image. + Say Y here only if you plan to use gdb to debug the kernel. + If you don't debug the kernel, you can say N. + +config DEBUG_SPINLOCK_SLEEP + bool "Sleep-inside-spinlock checking" + help + If you say Y here, various routines which may sleep will become very + noisy if they are called with a spinlock held. + +config FRAME_POINTER + bool "Compile the kernel with frame pointers" + help + If you say Y here the resulting kernel image will be slightly larger + and slower, but it will give very useful debugging information. + If you don't debug the kernel, you can say N, but we may not be able + to solve problems without frame pointers. + +config 4KSTACKS + bool "Use 4Kb for kernel stacks instead of 8Kb" + help + If you say Y here the kernel will use a 4Kb stacksize for the + kernel stack attached to each process/thread. This facilitates + running more threads on a system and also reduces the pressure + on the VM subsystem for higher order allocations. This option + will also use IRQ stacks to compensate for the reduced stackspace. + +config X86_FIND_SMP_CONFIG + bool + depends on X86_LOCAL_APIC || X86_VOYAGER + default y + +config X86_MPPARSE + bool + depends on X86_LOCAL_APIC && !X86_VISWS + default y + +endmenu + +# +# Use the generic interrupt handling code in kernel/irq/: +# +config GENERIC_HARDIRQS + bool + default y + +config GENERIC_IRQ_PROBE + bool + default y + +config X86_SMP + bool + depends on SMP && !X86_VOYAGER + default y + +config X86_HT + bool + depends on SMP && !(X86_VISWS || X86_VOYAGER) + default y + +config X86_BIOS_REBOOT + bool + depends on !(X86_VISWS || X86_VOYAGER) + default y + +config X86_TRAMPOLINE + bool + depends on X86_SMP || (X86_VOYAGER && SMP) + default y + +config PC + bool + depends on X86 && !EMBEDDED + default y + +endmenu diff --cc linux-2.6.10-rc3-xen-sparse/arch/xen/i386/kernel/traps.c index c837f935b4,0000000000..1936d96c37 mode 100644,000000..100644 --- a/linux-2.6.10-rc3-xen-sparse/arch/xen/i386/kernel/traps.c +++ b/linux-2.6.10-rc3-xen-sparse/arch/xen/i386/kernel/traps.c @@@ -1,990 -1,0 +1,989 @@@ +/* + * linux/arch/i386/traps.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * Pentium III FXSR, SSE support + * Gareth Hughes , May 2000 + */ + +/* + * 'Traps.c' handles hardware traps and faults after we have saved some + * state in 'asm.s'. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_EISA +#include +#include +#endif + +#ifdef CONFIG_MCA +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include "mach_traps.h" + +asmlinkage int system_call(void); + +/* Do we ignore FPU interrupts ? */ +char ignore_fpu_irq = 0; + +/* + * The IDT has to be page-aligned to simplify the Pentium + * F0 0F bug workaround.. We have a special link segment + * for this. + */ +struct desc_struct idt_table[256] __attribute__((__section__(".data.idt"))) = { {0, 0}, }; + +asmlinkage void divide_error(void); +asmlinkage void debug(void); +asmlinkage void nmi(void); +asmlinkage void int3(void); +asmlinkage void overflow(void); +asmlinkage void bounds(void); +asmlinkage void invalid_op(void); +asmlinkage void device_not_available(void); +asmlinkage void coprocessor_segment_overrun(void); +asmlinkage void invalid_TSS(void); +asmlinkage void segment_not_present(void); +asmlinkage void stack_segment(void); +asmlinkage void general_protection(void); +asmlinkage void page_fault(void); +asmlinkage void coprocessor_error(void); +asmlinkage void simd_coprocessor_error(void); +asmlinkage void alignment_check(void); +asmlinkage void fixup_4gb_segment(void); +asmlinkage void machine_check(void); + +static int kstack_depth_to_print = 24; +struct notifier_block *i386die_chain; +static spinlock_t die_notifier_lock = SPIN_LOCK_UNLOCKED; + +int register_die_notifier(struct notifier_block *nb) +{ + int err = 0; + unsigned long flags; + spin_lock_irqsave(&die_notifier_lock, flags); + err = notifier_chain_register(&i386die_chain, nb); + spin_unlock_irqrestore(&die_notifier_lock, flags); + return err; +} + +static inline int valid_stack_ptr(struct thread_info *tinfo, void *p) +{ + return p > (void *)tinfo && + p < (void *)tinfo + THREAD_SIZE - 3; +} + +static inline unsigned long print_context_stack(struct thread_info *tinfo, + unsigned long *stack, unsigned long ebp) +{ + unsigned long addr; + +#ifdef CONFIG_FRAME_POINTER + while (valid_stack_ptr(tinfo, (void *)ebp)) { + addr = *(unsigned long *)(ebp + 4); + printk(" [<%08lx>] ", addr); + print_symbol("%s", addr); + printk("\n"); + ebp = *(unsigned long *)ebp; + } +#else + while (valid_stack_ptr(tinfo, stack)) { + addr = *stack++; + if (__kernel_text_address(addr)) { + printk(" [<%08lx>]", addr); + print_symbol(" %s", addr); + printk("\n"); + } + } +#endif + return ebp; +} + +void show_trace(struct task_struct *task, unsigned long * stack) +{ + unsigned long ebp; + + if (!task) + task = current; + + if (task == current) { + /* Grab ebp right from our regs */ + asm ("movl %%ebp, %0" : "=r" (ebp) : ); + } else { + /* ebp is the last reg pushed by switch_to */ + ebp = *(unsigned long *) task->thread.esp; + } + + while (1) { + struct thread_info *context; + context = (struct thread_info *) + ((unsigned long)stack & (~(THREAD_SIZE - 1))); + ebp = print_context_stack(context, stack, ebp); + stack = (unsigned long*)context->previous_esp; + if (!stack) + break; + printk(" =======================\n"); + } +} + +void show_stack(struct task_struct *task, unsigned long *esp) +{ + unsigned long *stack; + int i; + + if (esp == NULL) { + if (task) + esp = (unsigned long*)task->thread.esp; + else + esp = (unsigned long *)&esp; + } + + stack = esp; + for(i = 0; i < kstack_depth_to_print; i++) { + if (kstack_end(stack)) + break; + if (i && ((i % 8) == 0)) + printk("\n "); + printk("%08lx ", *stack++); + } + printk("\nCall Trace:\n"); + show_trace(task, esp); +} + +/* + * The architecture-independent dump_stack generator + */ +void dump_stack(void) +{ + unsigned long stack; + + show_trace(current, &stack); +} + +EXPORT_SYMBOL(dump_stack); + +void show_registers(struct pt_regs *regs) +{ + int i; + int in_kernel = 1; + unsigned long esp; + unsigned short ss; + + esp = (unsigned long) (®s->esp); + ss = __KERNEL_DS; + if (regs->xcs & 2) { + in_kernel = 0; + esp = regs->esp; + ss = regs->xss & 0xffff; + } + print_modules(); + printk("CPU: %d\nEIP: %04x:[<%08lx>] %s VLI\nEFLAGS: %08lx" + " (%s) \n", + smp_processor_id(), 0xffff & regs->xcs, regs->eip, + print_tainted(), regs->eflags, system_utsname.release); + print_symbol("EIP is at %s\n", regs->eip); + printk("eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", + regs->eax, regs->ebx, regs->ecx, regs->edx); + printk("esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", + regs->esi, regs->edi, regs->ebp, esp); + printk("ds: %04x es: %04x ss: %04x\n", + regs->xds & 0xffff, regs->xes & 0xffff, ss); + printk("Process %s (pid: %d, threadinfo=%p task=%p)", + current->comm, current->pid, current_thread_info(), current); + /* + * When in-kernel, we also print out the stack and code at the + * time of the fault.. + */ + if (in_kernel) { + u8 *eip; + + printk("\nStack: "); + show_stack(NULL, (unsigned long*)esp); + + printk("Code: "); + + eip = (u8 *)regs->eip - 43; + for (i = 0; i < 64; i++, eip++) { + unsigned char c; + + if (eip < (u8 *)PAGE_OFFSET || __get_user(c, eip)) { + printk(" Bad EIP value."); + break; + } + if (eip == (u8 *)regs->eip) + printk("<%02x> ", c); + else + printk("%02x ", c); + } + } + printk("\n"); +} + +static void handle_BUG(struct pt_regs *regs) +{ + unsigned short ud2; + unsigned short line; + char *file; + char c; + unsigned long eip; + + if (regs->xcs & 2) + goto no_bug; /* Not in kernel */ + + eip = regs->eip; + + if (eip < PAGE_OFFSET) + goto no_bug; + if (__get_user(ud2, (unsigned short *)eip)) + goto no_bug; + if (ud2 != 0x0b0f) + goto no_bug; + if (__get_user(line, (unsigned short *)(eip + 2))) + goto bug; + if (__get_user(file, (char **)(eip + 4)) || + (unsigned long)file < PAGE_OFFSET || __get_user(c, file)) + file = ""; + + printk("------------[ cut here ]------------\n"); + printk(KERN_ALERT "kernel BUG at %s:%d!\n", file, line); + +no_bug: + return; + + /* Here we know it was a BUG but file-n-line is unavailable */ +bug: + printk("Kernel BUG\n"); +} + +void die(const char * str, struct pt_regs * regs, long err) +{ + static struct { + spinlock_t lock; + u32 lock_owner; + int lock_owner_depth; + } die = { + .lock = SPIN_LOCK_UNLOCKED, + .lock_owner = -1, + .lock_owner_depth = 0 + }; + static int die_counter; + + if (die.lock_owner != smp_processor_id()) { + console_verbose(); + spin_lock_irq(&die.lock); + die.lock_owner = smp_processor_id(); + die.lock_owner_depth = 0; + bust_spinlocks(1); + } + + if (++die.lock_owner_depth < 3) { + int nl = 0; + handle_BUG(regs); + printk(KERN_ALERT "%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter); +#ifdef CONFIG_PREEMPT + printk("PREEMPT "); + nl = 1; +#endif +#ifdef CONFIG_SMP + printk("SMP "); + nl = 1; +#endif +#ifdef CONFIG_DEBUG_PAGEALLOC + printk("DEBUG_PAGEALLOC"); + nl = 1; +#endif + if (nl) + printk("\n"); + notify_die(DIE_OOPS, (char *)str, regs, err, 255, SIGSEGV); + show_registers(regs); + } else + printk(KERN_ERR "Recursive die() failure, output suppressed\n"); + + bust_spinlocks(0); + die.lock_owner = -1; + spin_unlock_irq(&die.lock); + if (in_interrupt()) + panic("Fatal exception in interrupt"); + + if (panic_on_oops) { + printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(5 * HZ); + panic("Fatal exception"); + } + do_exit(SIGSEGV); +} + +static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err) +{ + if (!(regs->eflags & VM_MASK) && !(2 & regs->xcs)) + die(str, regs, err); +} + +static void do_trap(int trapnr, int signr, char *str, int vm86, + struct pt_regs * regs, long error_code, siginfo_t *info) +{ + if (regs->eflags & VM_MASK) { + if (vm86) + goto vm86_trap; + goto trap_signal; + } + + if (!(regs->xcs & 2)) + goto kernel_trap; + + trap_signal: { + struct task_struct *tsk = current; + tsk->thread.error_code = error_code; + tsk->thread.trap_no = trapnr; + if (info) + force_sig_info(signr, info, tsk); + else + force_sig(signr, tsk); + return; + } + + kernel_trap: { + if (!fixup_exception(regs)) + die(str, regs, error_code); + return; + } + + vm86_trap: { + int ret = handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, trapnr); + if (ret) goto trap_signal; + return; + } +} + +#define DO_ERROR(trapnr, signr, str, name) \ +fastcall void do_##name(struct pt_regs * regs, long error_code) \ +{ \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ + do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \ +} + +#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \ +fastcall void do_##name(struct pt_regs * regs, long error_code) \ +{ \ + siginfo_t info; \ + info.si_signo = signr; \ + info.si_errno = 0; \ + info.si_code = sicode; \ + info.si_addr = (void __user *)siaddr; \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ + do_trap(trapnr, signr, str, 0, regs, error_code, &info); \ +} + +#define DO_VM86_ERROR(trapnr, signr, str, name) \ +fastcall void do_##name(struct pt_regs * regs, long error_code) \ +{ \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ + do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \ +} + +#define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \ +fastcall void do_##name(struct pt_regs * regs, long error_code) \ +{ \ + siginfo_t info; \ + info.si_signo = signr; \ + info.si_errno = 0; \ + info.si_code = sicode; \ + info.si_addr = (void __user *)siaddr; \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ + do_trap(trapnr, signr, str, 1, regs, error_code, &info); \ +} + +DO_VM86_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->eip) +#ifndef CONFIG_KPROBES +DO_VM86_ERROR( 3, SIGTRAP, "int3", int3) +#endif +DO_VM86_ERROR( 4, SIGSEGV, "overflow", overflow) +DO_VM86_ERROR( 5, SIGSEGV, "bounds", bounds) +DO_ERROR_INFO( 6, SIGILL, "invalid operand", invalid_op, ILL_ILLOPN, regs->eip) +DO_VM86_ERROR( 7, SIGSEGV, "device not available", device_not_available) +DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) +DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) +DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) +DO_ERROR(12, SIGBUS, "stack segment", stack_segment) +DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) +#ifdef CONFIG_X86_MCE +DO_ERROR(18, SIGBUS, "machine check", machine_check) +#endif + +fastcall void do_general_protection(struct pt_regs * regs, long error_code) +{ + /* + * If we trapped on an LDT access then ensure that the default_ldt is + * loaded, if nothing else. We load default_ldt lazily because LDT + * switching costs time and many applications don't need it. + */ + if (unlikely((error_code & 6) == 4)) { + unsigned long ldt; + __asm__ __volatile__ ("sldt %0" : "=r" (ldt)); + if (ldt == 0) { + mmu_update_t u; + u.ptr = MMU_EXTENDED_COMMAND; + u.ptr |= (unsigned long)&default_ldt[0]; + u.val = MMUEXT_SET_LDT | (5 << MMUEXT_CMD_SHIFT); + if (unlikely(HYPERVISOR_mmu_update(&u, 1, NULL) < 0)) { + show_trace(NULL, (unsigned long *)&u); + panic("Failed to install default LDT"); + } + return; + } + } + + if (regs->eflags & VM_MASK) + goto gp_in_vm86; + + if (!(regs->xcs & 2)) + goto gp_in_kernel; + + current->thread.error_code = error_code; + current->thread.trap_no = 13; + force_sig(SIGSEGV, current); + return; + +gp_in_vm86: + local_irq_enable(); + handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code); + return; + +gp_in_kernel: + if (!fixup_exception(regs)) { + if (notify_die(DIE_GPF, "general protection fault", regs, + error_code, 13, SIGSEGV) == NOTIFY_STOP) + return; + die("general protection fault", regs, error_code); + } +} + +static void mem_parity_error(unsigned char reason, struct pt_regs * regs) +{ + printk("Uhhuh. NMI received. Dazed and confused, but trying to continue\n"); + printk("You probably have a hardware problem with your RAM chips\n"); + + /* Clear and disable the memory parity error line. */ + clear_mem_error(reason); +} + +static void io_check_error(unsigned char reason, struct pt_regs * regs) +{ + unsigned long i; + + printk("NMI: IOCK error (debug interrupt?)\n"); + show_registers(regs); + + /* Re-enable the IOCK line, wait for a few seconds */ + reason = (reason & 0xf) | 8; + outb(reason, 0x61); + i = 2000; + while (--i) udelay(1000); + reason &= ~8; + outb(reason, 0x61); +} + +static void unknown_nmi_error(unsigned char reason, struct pt_regs * regs) +{ +#ifdef CONFIG_MCA + /* Might actually be able to figure out what the guilty party + * is. */ + if( MCA_bus ) { + mca_handle_nmi(); + return; + } +#endif + printk("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n", + reason, smp_processor_id()); + printk("Dazed and confused, but trying to continue\n"); + printk("Do you have a strange power saving mode enabled?\n"); +} + +static spinlock_t nmi_print_lock = SPIN_LOCK_UNLOCKED; + +void die_nmi (struct pt_regs *regs, const char *msg) +{ + spin_lock(&nmi_print_lock); + /* + * We are in trouble anyway, lets at least try + * to get a message out. + */ + bust_spinlocks(1); + printk(msg); + printk(" on CPU%d, eip %08lx, registers:\n", + smp_processor_id(), regs->eip); + show_registers(regs); + printk("console shuts up ...\n"); + console_silent(); + spin_unlock(&nmi_print_lock); + bust_spinlocks(0); + do_exit(SIGSEGV); +} + +static void default_do_nmi(struct pt_regs * regs) +{ + unsigned char reason = 0; + + /* Only the BSP gets external NMIs from the system. */ + if (!smp_processor_id()) + reason = get_nmi_reason(); + + if (!(reason & 0xc0)) { + if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 0, SIGINT) + == NOTIFY_STOP) + return; +#ifdef CONFIG_X86_LOCAL_APIC + /* + * Ok, so this is none of the documented NMI sources, + * so it must be the NMI watchdog. + */ + if (nmi_watchdog) { + nmi_watchdog_tick(regs); + return; + } +#endif + unknown_nmi_error(reason, regs); + return; + } + if (notify_die(DIE_NMI, "nmi", regs, reason, 0, SIGINT) == NOTIFY_STOP) + return; + if (reason & 0x80) + mem_parity_error(reason, regs); + if (reason & 0x40) + io_check_error(reason, regs); + /* + * Reassert NMI in case it became active meanwhile + * as it's edge-triggered. + */ + reassert_nmi(); +} + +static int dummy_nmi_callback(struct pt_regs * regs, int cpu) +{ + return 0; +} + +static nmi_callback_t nmi_callback = dummy_nmi_callback; + +fastcall void do_nmi(struct pt_regs * regs, long error_code) +{ + int cpu; + + nmi_enter(); + + cpu = smp_processor_id(); + ++nmi_count(cpu); + + if (!nmi_callback(regs, cpu)) + default_do_nmi(regs); + + nmi_exit(); +} + +void set_nmi_callback(nmi_callback_t callback) +{ + nmi_callback = callback; +} + +void unset_nmi_callback(void) +{ + nmi_callback = dummy_nmi_callback; +} + +#ifdef CONFIG_KPROBES +fastcall int do_int3(struct pt_regs *regs, long error_code) +{ + if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) + == NOTIFY_STOP) + return 1; + /* This is an interrupt gate, because kprobes wants interrupts + disabled. Normal trap handlers don't. */ + restore_interrupts(regs); + do_trap(3, SIGTRAP, "int3", 1, regs, error_code, NULL); + return 0; +} +#endif + +/* + * Our handling of the processor debug registers is non-trivial. + * We do not clear them on entry and exit from the kernel. Therefore + * it is possible to get a watchpoint trap here from inside the kernel. + * However, the code in ./ptrace.c has ensured that the user can + * only set watchpoints on userspace addresses. Therefore the in-kernel + * watchpoint trap can only occur in code which is reading/writing + * from user space. Such code must not hold kernel locks (since it + * can equally take a page fault), therefore it is safe to call + * force_sig_info even though that claims and releases locks. + * + * Code in ./signal.c ensures that the debug control register + * is restored before we deliver any signal, and therefore that + * user code runs with the correct debug control register even though + * we clear it here. + * + * Being careful here means that we don't have to be as careful in a + * lot of more complicated places (task switching can be a bit lazy + * about restoring all the debug state, and ptrace doesn't have to + * find every occurrence of the TF bit that could be saved away even + * by user code) + */ +fastcall void do_debug(struct pt_regs * regs, long error_code) +{ + unsigned int condition; + struct task_struct *tsk = current; + siginfo_t info; + + condition = HYPERVISOR_get_debugreg(6); + + if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code, + SIGTRAP) == NOTIFY_STOP) + return; +#if 0 + /* It's safe to allow irq's after DR6 has been saved */ + if (regs->eflags & X86_EFLAGS_IF) + local_irq_enable(); +#endif + + /* Mask out spurious debug traps due to lazy DR7 setting */ + if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) { + if (!tsk->thread.debugreg[7]) + goto clear_dr7; + } + + if (regs->eflags & VM_MASK) + goto debug_vm86; + + /* Save debug status register where ptrace can see it */ + tsk->thread.debugreg[6] = condition; + + /* Mask out spurious TF errors due to lazy TF clearing */ + if (condition & DR_STEP) { + /* + * The TF error should be masked out only if the current + * process is not traced and if the TRAP flag has been set + * previously by a tracing process (condition detected by + * the PT_DTRACE flag); remember that the i386 TRAP flag + * can be modified by the process itself in user mode, + * allowing programs to debug themselves without the ptrace() + * interface. + */ + if ((regs->xcs & 2) == 0) + goto clear_TF_reenable; + if ((tsk->ptrace & (PT_DTRACE|PT_PTRACED)) == PT_DTRACE) + goto clear_TF; + } + + /* Ok, finally something we can handle */ + tsk->thread.trap_no = 1; + tsk->thread.error_code = error_code; + info.si_signo = SIGTRAP; + info.si_errno = 0; + info.si_code = TRAP_BRKPT; + + /* If this is a kernel mode trap, save the user PC on entry to + * the kernel, that's what the debugger can make sense of. + */ + info.si_addr = ((regs->xcs & 2) == 0) ? (void __user *)tsk->thread.eip + : (void __user *)regs->eip; + force_sig_info(SIGTRAP, &info, tsk); + + /* Disable additional traps. They'll be re-enabled when + * the signal is delivered. + */ +clear_dr7: + HYPERVISOR_set_debugreg(7, 0); + return; + +debug_vm86: + handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1); + return; + +clear_TF_reenable: + set_tsk_thread_flag(tsk, TIF_SINGLESTEP); +clear_TF: + regs->eflags &= ~TF_MASK; + return; +} + +/* + * Note that we play around with the 'TS' bit in an attempt to get + * the correct behaviour even in the presence of the asynchronous + * IRQ13 behaviour + */ +void math_error(void __user *eip) +{ + struct task_struct * task; + siginfo_t info; + unsigned short cwd, swd; + + /* + * Save the info for the exception handler and clear the error. + */ + task = current; + save_init_fpu(task); + task->thread.trap_no = 16; + task->thread.error_code = 0; + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_code = __SI_FAULT; + info.si_addr = eip; + /* + * (~cwd & swd) will mask out exceptions that are not set to unmasked + * status. 0x3f is the exception bits in these regs, 0x200 is the + * C1 reg you need in case of a stack fault, 0x040 is the stack + * fault bit. We should only be taking one exception at a time, + * so if this combination doesn't produce any single exception, + * then we have a bad program that isn't syncronizing its FPU usage + * and it will suffer the consequences since we won't be able to + * fully reproduce the context of the exception + */ + cwd = get_fpu_cwd(task); + swd = get_fpu_swd(task); + switch (((~cwd) & swd & 0x3f) | (swd & 0x240)) { + case 0x000: + default: + break; + case 0x001: /* Invalid Op */ + case 0x041: /* Stack Fault */ + case 0x241: /* Stack Fault | Direction */ + info.si_code = FPE_FLTINV; + /* Should we clear the SF or let user space do it ???? */ + break; + case 0x002: /* Denormalize */ + case 0x010: /* Underflow */ + info.si_code = FPE_FLTUND; + break; + case 0x004: /* Zero Divide */ + info.si_code = FPE_FLTDIV; + break; + case 0x008: /* Overflow */ + info.si_code = FPE_FLTOVF; + break; + case 0x020: /* Precision */ + info.si_code = FPE_FLTRES; + break; + } + force_sig_info(SIGFPE, &info, task); +} + +fastcall void do_coprocessor_error(struct pt_regs * regs, long error_code) +{ + ignore_fpu_irq = 1; + math_error((void __user *)regs->eip); +} + +void simd_math_error(void __user *eip) +{ + struct task_struct * task; + siginfo_t info; + unsigned short mxcsr; + + /* + * Save the info for the exception handler and clear the error. + */ + task = current; + save_init_fpu(task); + task->thread.trap_no = 19; + task->thread.error_code = 0; + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_code = __SI_FAULT; + info.si_addr = eip; + /* + * The SIMD FPU exceptions are handled a little differently, as there + * is only a single status/control register. Thus, to determine which + * unmasked exception was caught we must mask the exception mask bits + * at 0x1f80, and then use these to mask the exception bits at 0x3f. + */ + mxcsr = get_fpu_mxcsr(task); + switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) { + case 0x000: + default: + break; + case 0x001: /* Invalid Op */ + info.si_code = FPE_FLTINV; + break; + case 0x002: /* Denormalize */ + case 0x010: /* Underflow */ + info.si_code = FPE_FLTUND; + break; + case 0x004: /* Zero Divide */ + info.si_code = FPE_FLTDIV; + break; + case 0x008: /* Overflow */ + info.si_code = FPE_FLTOVF; + break; + case 0x020: /* Precision */ + info.si_code = FPE_FLTRES; + break; + } + force_sig_info(SIGFPE, &info, task); +} + +fastcall void do_simd_coprocessor_error(struct pt_regs * regs, + long error_code) +{ + if (cpu_has_xmm) { + /* Handle SIMD FPU exceptions on PIII+ processors. */ + ignore_fpu_irq = 1; + simd_math_error((void __user *)regs->eip); + } else { + /* + * Handle strange cache flush from user space exception + * in all other cases. This is undocumented behaviour. + */ + if (regs->eflags & VM_MASK) { + handle_vm86_fault((struct kernel_vm86_regs *)regs, + error_code); + return; + } + die_if_kernel("cache flush denied", regs, error_code); + current->thread.trap_no = 19; + current->thread.error_code = error_code; + force_sig(SIGSEGV, current); + } +} + +/* + * 'math_state_restore()' saves the current math information in the + * old math state array, and gets the new ones from the current task + * + * Careful.. There are problems with IBM-designed IRQ13 behaviour. + * Don't touch unless you *really* know how it works. + * + * Must be called with kernel preemption disabled (in this case, + * local interrupts are disabled at the call-site in entry.S). + */ +asmlinkage void math_state_restore(struct pt_regs regs) +{ + struct thread_info *thread = current_thread_info(); + struct task_struct *tsk = thread->task; + + /* + * A trap in kernel mode can be ignored. It'll be the fast XOR or + * copying libraries, which will correctly save/restore state and + * reset the TS bit in CR0. + */ + if ((regs.xcs & 2) == 0) + return; + + clts(); /* Allow maths ops (or we recurse) */ + if (!tsk->used_math) + init_fpu(tsk); + restore_fpu(tsk); + thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */ +} + +#ifndef CONFIG_MATH_EMULATION + +asmlinkage void math_emulate(long arg) +{ + printk("math-emulation not enabled and no coprocessor found.\n"); + printk("killing %s.\n",current->comm); + force_sig(SIGFPE,current); + schedule(); +} + +#endif /* CONFIG_MATH_EMULATION */ + +#ifdef CONFIG_X86_F00F_BUG +void __init trap_init_f00f_bug(void) +{ + __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO); + + /* + * Update the IDT descriptor and reload the IDT so that + * it uses the read-only mapped virtual address. + */ + idt_descr.address = fix_to_virt(FIX_F00F_IDT); + __asm__ __volatile__("lidt %0" : : "m" (idt_descr)); +} +#endif + + +/* NB. All these are "trap gates" (i.e. events_mask isn't cleared). */ +static trap_info_t trap_table[] = { + { 0, 0, __KERNEL_CS, (unsigned long)divide_error }, + { 1, 0, __KERNEL_CS, (unsigned long)debug }, + { 3, 3, __KERNEL_CS, (unsigned long)int3 }, + { 4, 3, __KERNEL_CS, (unsigned long)overflow }, + { 5, 3, __KERNEL_CS, (unsigned long)bounds }, + { 6, 0, __KERNEL_CS, (unsigned long)invalid_op }, + { 7, 0, __KERNEL_CS, (unsigned long)device_not_available }, + { 9, 0, __KERNEL_CS, (unsigned long)coprocessor_segment_overrun }, + { 10, 0, __KERNEL_CS, (unsigned long)invalid_TSS }, + { 11, 0, __KERNEL_CS, (unsigned long)segment_not_present }, + { 12, 0, __KERNEL_CS, (unsigned long)stack_segment }, + { 13, 0, __KERNEL_CS, (unsigned long)general_protection }, + { 14, 0, __KERNEL_CS, (unsigned long)page_fault }, + { 15, 0, __KERNEL_CS, (unsigned long)fixup_4gb_segment }, + { 16, 0, __KERNEL_CS, (unsigned long)coprocessor_error }, + { 17, 0, __KERNEL_CS, (unsigned long)alignment_check }, +#ifdef CONFIG_X86_MCE + { 18, 0, __KERNEL_CS, (unsigned long)machine_check }, +#endif + { 19, 0, __KERNEL_CS, (unsigned long)simd_coprocessor_error }, + { SYSCALL_VECTOR, 3, __KERNEL_CS, (unsigned long)system_call }, + { 0, 0, 0, 0 } +}; + +void __init trap_init(void) +{ + HYPERVISOR_set_trap_table(trap_table); + HYPERVISOR_set_fast_trap(SYSCALL_VECTOR); + + /* + * default LDT is a single-entry callgate to lcall7 for iBCS + * and a callgate to lcall27 for Solaris/x86 binaries + */ - clear_page(&default_ldt[0]); + make_lowmem_page_readonly(&default_ldt[0]); + xen_flush_page_update_queue(); + + /* + * Should be a barrier for any external CPU state. + */ + cpu_init(); +} diff --cc linux-2.6.10-rc3-xen-sparse/arch/xen/kernel/reboot.c index 1f7303efd2,0000000000..78c46675f5 mode 100644,000000..100644 --- a/linux-2.6.10-rc3-xen-sparse/arch/xen/kernel/reboot.c +++ b/linux-2.6.10-rc3-xen-sparse/arch/xen/kernel/reboot.c @@@ -1,243 -1,0 +1,258 @@@ + +#define __KERNEL_SYSCALLS__ +static int errno; +#include +#include +#include +#include +#include +#include +#include ++#include +#include +#include +#include +#include +#include +#include +#include + +void machine_restart(char * __unused) +{ + /* We really want to get pending console data out before we die. */ + extern void xencons_force_flush(void); + xencons_force_flush(); + HYPERVISOR_reboot(); +} + +void machine_halt(void) +{ + machine_power_off(); +} + +void machine_power_off(void) +{ + /* We really want to get pending console data out before we die. */ + extern void xencons_force_flush(void); + xencons_force_flush(); + HYPERVISOR_shutdown(); +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) +int reboot_thru_bios = 0; /* for dmi_scan.c */ +EXPORT_SYMBOL(machine_restart); +EXPORT_SYMBOL(machine_halt); +EXPORT_SYMBOL(machine_power_off); +#endif + + +/****************************************************************************** + * Stop/pickle callback handling. + */ + - //#include - +/* Ignore multiple shutdown requests. */ +static int shutting_down = -1; ++static int pending_sysrq = -1; + +static void __do_suspend(void) +{ + int i, j; + suspend_record_t *suspend_record; + + /* Hmmm... a cleaner interface to suspend/resume blkdevs would be nice. */ + /* XXX SMH: yes it would :-( */ +#ifdef CONFIG_XEN_BLKDEV_FRONTEND + extern void blkdev_suspend(void); + extern void blkdev_resume(void); +#else +#define blkdev_suspend() do{}while(0) +#define blkdev_resume() do{}while(0) +#endif + +#ifdef CONFIG_XEN_NETDEV_FRONTEND + extern void netif_suspend(void); + extern void netif_resume(void); +#else +#define netif_suspend() do{}while(0) +#define netif_resume() do{}while(0) +#endif + + extern void time_suspend(void); + extern void time_resume(void); + extern unsigned long max_pfn; + extern unsigned long *pfn_to_mfn_frame_list; + + suspend_record = (suspend_record_t *)__get_free_page(GFP_KERNEL); + if ( suspend_record == NULL ) + goto out; + + suspend_record->nr_pfns = max_pfn; /* final number of pfns */ + + __cli(); + + netif_suspend(); + + blkdev_suspend(); + + time_suspend(); + + ctrl_if_suspend(); + + irq_suspend(); + + HYPERVISOR_shared_info = (shared_info_t *)empty_zero_page; + clear_fixmap(FIX_SHARED_INFO); + + memcpy(&suspend_record->resume_info, &xen_start_info, sizeof(xen_start_info)); + + HYPERVISOR_suspend(virt_to_machine(suspend_record) >> PAGE_SHIFT); + + HYPERVISOR_vm_assist(VMASST_CMD_enable, + VMASST_TYPE_4gb_segments); +#ifdef CONFIG_XEN_WRITABLE_PAGETABLES + HYPERVISOR_vm_assist(VMASST_CMD_enable, + VMASST_TYPE_writable_pagetables); +#endif + + shutting_down = -1; + + memcpy(&xen_start_info, &suspend_record->resume_info, sizeof(xen_start_info)); + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) + set_fixmap_ma(FIX_SHARED_INFO, xen_start_info.shared_info); +#else + set_fixmap(FIX_SHARED_INFO, xen_start_info.shared_info); +#endif + + HYPERVISOR_shared_info = (shared_info_t *)fix_to_virt(FIX_SHARED_INFO); + + memset(empty_zero_page, 0, PAGE_SIZE); + + for ( i=0, j=0; i < max_pfn; i+=(PAGE_SIZE/sizeof(unsigned long)), j++ ) + { + pfn_to_mfn_frame_list[j] = + virt_to_machine(&phys_to_machine_mapping[i]) >> PAGE_SHIFT; + } + HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list = + virt_to_machine(pfn_to_mfn_frame_list) >> PAGE_SHIFT; + + + irq_resume(); + + ctrl_if_resume(); + + time_resume(); + + blkdev_resume(); + + netif_resume(); + + __sti(); + + out: + if ( suspend_record != NULL ) + free_page((unsigned long)suspend_record); +} + +static int shutdown_process(void *__unused) +{ + static char *envp[] = { "HOME=/", "TERM=linux", + "PATH=/sbin:/usr/sbin:/bin:/usr/bin", NULL }; + static char *restart_argv[] = { "/sbin/shutdown", "-r", "now", NULL }; + static char *poweroff_argv[] = { "/sbin/halt", "-p", NULL }; + + extern asmlinkage long sys_reboot(int magic1, int magic2, + unsigned int cmd, void *arg); + + daemonize( +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) + "shutdown" +#endif + ); + + switch ( shutting_down ) + { + case CMSG_SHUTDOWN_POWEROFF: + if ( execve("/sbin/halt", poweroff_argv, envp) < 0 ) + { + sys_reboot(LINUX_REBOOT_MAGIC1, + LINUX_REBOOT_MAGIC2, + LINUX_REBOOT_CMD_POWER_OFF, + NULL); + } + break; + + case CMSG_SHUTDOWN_REBOOT: + if ( execve("/sbin/shutdown", restart_argv, envp) < 0 ) + { + sys_reboot(LINUX_REBOOT_MAGIC1, + LINUX_REBOOT_MAGIC2, + LINUX_REBOOT_CMD_RESTART, + NULL); + } + break; + } + + shutting_down = -1; /* could try again */ + + return 0; +} + +static void __shutdown_handler(void *unused) +{ + int err; + + if ( shutting_down != CMSG_SHUTDOWN_SUSPEND ) + { + err = kernel_thread(shutdown_process, NULL, CLONE_FS | CLONE_FILES); + if ( err < 0 ) + printk(KERN_ALERT "Error creating shutdown process!\n"); + } + else + { + __do_suspend(); + } +} + ++static void __sysrq_handler(void *unused) ++{ ++#ifdef CONFIG_MAGIC_SYSRQ ++ handle_sysrq(pending_sysrq, NULL, NULL); ++#endif ++ pending_sysrq = -1; ++} ++ +static void shutdown_handler(ctrl_msg_t *msg, unsigned long id) +{ + static DECLARE_WORK(shutdown_work, __shutdown_handler, NULL); ++ static DECLARE_WORK(sysrq_work, __sysrq_handler, NULL); + + if ( (shutting_down == -1) && + ((msg->subtype == CMSG_SHUTDOWN_POWEROFF) || + (msg->subtype == CMSG_SHUTDOWN_REBOOT) || + (msg->subtype == CMSG_SHUTDOWN_SUSPEND)) ) + { + shutting_down = msg->subtype; + schedule_work(&shutdown_work); + } ++ else if ( (pending_sysrq == -1) && ++ (msg->subtype == CMSG_SHUTDOWN_SYSRQ) ) ++ { ++ pending_sysrq = msg->msg[0]; ++ schedule_work(&sysrq_work); ++ } + else + { + printk("Ignore spurious shutdown request\n"); + } + + ctrl_if_send_response(msg); +} + +static int __init setup_shutdown_event(void) +{ + ctrl_if_register_receiver(CMSG_SHUTDOWN, shutdown_handler, 0); + return 0; +} + +__initcall(setup_shutdown_event); diff --cc linux-2.6.10-rc3-xen-sparse/drivers/xen/netback/interface.c index baa50ace22,0000000000..8de03f644b mode 100644,000000..100644 --- a/linux-2.6.10-rc3-xen-sparse/drivers/xen/netback/interface.c +++ b/linux-2.6.10-rc3-xen-sparse/drivers/xen/netback/interface.c @@@ -1,297 -1,0 +1,301 @@@ +/****************************************************************************** + * arch/xen/drivers/netif/backend/interface.c + * + * Network-device interface management. + * + * Copyright (c) 2004, Keir Fraser + */ + +#include "common.h" +#include + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) +#define VMALLOC_VMADDR(x) ((unsigned long)(x)) +#endif + +#define NETIF_HASHSZ 1024 +#define NETIF_HASH(_d,_h) (((int)(_d)^(int)(_h))&(NETIF_HASHSZ-1)) + +static netif_t *netif_hash[NETIF_HASHSZ]; + +netif_t *netif_find_by_handle(domid_t domid, unsigned int handle) +{ + netif_t *netif = netif_hash[NETIF_HASH(domid, handle)]; + while ( (netif != NULL) && + ((netif->domid != domid) || (netif->handle != handle)) ) + netif = netif->hash_next; + return netif; +} + +static void __netif_disconnect_complete(void *arg) +{ + netif_t *netif = (netif_t *)arg; + ctrl_msg_t cmsg; + netif_be_disconnect_t disc; + + /* + * These can't be done in netif_disconnect() because at that point there + * may be outstanding requests in the network stack whose asynchronous + * responses must still be notified to the remote driver. + */ + unbind_evtchn_from_irq(netif->evtchn); + vfree(netif->tx); /* Frees netif->rx as well. */ + rtnl_lock(); + (void)dev_close(netif->dev); + rtnl_unlock(); + + /* Construct the deferred response message. */ + cmsg.type = CMSG_NETIF_BE; + cmsg.subtype = CMSG_NETIF_BE_DISCONNECT; + cmsg.id = netif->disconnect_rspid; + cmsg.length = sizeof(netif_be_disconnect_t); + disc.domid = netif->domid; + disc.netif_handle = netif->handle; + disc.status = NETIF_BE_STATUS_OKAY; + memcpy(cmsg.msg, &disc, sizeof(disc)); + + /* + * Make sure message is constructed /before/ status change, because + * after the status change the 'netif' structure could be deallocated at + * any time. Also make sure we send the response /after/ status change, + * as otherwise a subsequent CONNECT request could spuriously fail if + * another CPU doesn't see the status change yet. + */ + mb(); + if ( netif->status != DISCONNECTING ) + BUG(); + netif->status = DISCONNECTED; + mb(); + + /* Send the successful response. */ + ctrl_if_send_response(&cmsg); +} + +void netif_disconnect_complete(netif_t *netif) +{ + INIT_WORK(&netif->work, __netif_disconnect_complete, (void *)netif); + schedule_work(&netif->work); +} + +void netif_create(netif_be_create_t *create) +{ + int err = 0; + domid_t domid = create->domid; + unsigned int handle = create->netif_handle; + struct net_device *dev; + netif_t **pnetif, *netif; + char name[IFNAMSIZ]; + + snprintf(name, IFNAMSIZ - 1, "vif%u.%u", domid, handle); + dev = alloc_netdev(sizeof(netif_t), name, ether_setup); + if ( dev == NULL ) + { + DPRINTK("Could not create netif: out of memory\n"); + create->status = NETIF_BE_STATUS_OUT_OF_MEMORY; + return; + } + + netif = dev->priv; + memset(netif, 0, sizeof(*netif)); + netif->domid = domid; + netif->handle = handle; + netif->status = DISCONNECTED; + spin_lock_init(&netif->rx_lock); + spin_lock_init(&netif->tx_lock); + atomic_set(&netif->refcnt, 0); + netif->dev = dev; + + netif->credit_bytes = netif->remaining_credit = ~0UL; + netif->credit_usec = 0UL; + /*init_ac_timer(&new_vif->credit_timeout);*/ + + pnetif = &netif_hash[NETIF_HASH(domid, handle)]; + while ( *pnetif != NULL ) + { + if ( ((*pnetif)->domid == domid) && ((*pnetif)->handle == handle) ) + { + DPRINTK("Could not create netif: already exists\n"); + create->status = NETIF_BE_STATUS_INTERFACE_EXISTS; + free_netdev(dev); + return; + } + pnetif = &(*pnetif)->hash_next; + } + + dev->hard_start_xmit = netif_be_start_xmit; + dev->get_stats = netif_be_get_stats; - memcpy(dev->dev_addr, create->mac, ETH_ALEN); + + /* Disable queuing. */ + dev->tx_queue_len = 0; + - /* Force a different MAC from remote end. */ - dev->dev_addr[2] ^= 1; ++ /* ++ * Initialise a dummy MAC address. We choose the numerically largest ++ * non-broadcast address to prevent the address getting stolen by an ++ * Ethernet bridge for STP purposes. (FE:FF:FF:FF:FF:FF) ++ */ ++ memset(dev->dev_addr, 0xFF, ETH_ALEN); ++ dev->dev_addr[0] &= ~0x01; + + if ( (err = register_netdev(dev)) != 0 ) + { + DPRINTK("Could not register new net device %s: err=%d\n", + dev->name, err); + create->status = NETIF_BE_STATUS_OUT_OF_MEMORY; + free_netdev(dev); + return; + } + + netif->hash_next = *pnetif; + *pnetif = netif; + + DPRINTK("Successfully created netif\n"); + create->status = NETIF_BE_STATUS_OKAY; +} + +void netif_destroy(netif_be_destroy_t *destroy) +{ + domid_t domid = destroy->domid; + unsigned int handle = destroy->netif_handle; + netif_t **pnetif, *netif; + + pnetif = &netif_hash[NETIF_HASH(domid, handle)]; + while ( (netif = *pnetif) != NULL ) + { + if ( (netif->domid == domid) && (netif->handle == handle) ) + { + if ( netif->status != DISCONNECTED ) + goto still_connected; + goto destroy; + } + pnetif = &netif->hash_next; + } + + destroy->status = NETIF_BE_STATUS_INTERFACE_NOT_FOUND; + return; + + still_connected: + destroy->status = NETIF_BE_STATUS_INTERFACE_CONNECTED; + return; + + destroy: + *pnetif = netif->hash_next; + unregister_netdev(netif->dev); + free_netdev(netif->dev); + destroy->status = NETIF_BE_STATUS_OKAY; +} + +void netif_connect(netif_be_connect_t *connect) +{ + domid_t domid = connect->domid; + unsigned int handle = connect->netif_handle; + unsigned int evtchn = connect->evtchn; + unsigned long tx_shmem_frame = connect->tx_shmem_frame; + unsigned long rx_shmem_frame = connect->rx_shmem_frame; + struct vm_struct *vma; + pgprot_t prot; + int error; + netif_t *netif; +#if 0 + struct net_device *eth0_dev; +#endif + + netif = netif_find_by_handle(domid, handle); + if ( unlikely(netif == NULL) ) + { + DPRINTK("netif_connect attempted for non-existent netif (%u,%u)\n", + connect->domid, connect->netif_handle); + connect->status = NETIF_BE_STATUS_INTERFACE_NOT_FOUND; + return; + } + + if ( netif->status != DISCONNECTED ) + { + connect->status = NETIF_BE_STATUS_INTERFACE_CONNECTED; + return; + } + + if ( (vma = get_vm_area(2*PAGE_SIZE, VM_IOREMAP)) == NULL ) + { + connect->status = NETIF_BE_STATUS_OUT_OF_MEMORY; + return; + } + + prot = __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED); + error = direct_remap_area_pages(&init_mm, + VMALLOC_VMADDR(vma->addr), + tx_shmem_frame<addr) + PAGE_SIZE, + rx_shmem_frame<status = NETIF_BE_STATUS_OUT_OF_MEMORY; + else if ( error == -EFAULT ) + connect->status = NETIF_BE_STATUS_MAPPING_ERROR; + else + connect->status = NETIF_BE_STATUS_ERROR; + vfree(vma->addr); + return; + } + + netif->evtchn = evtchn; + netif->irq = bind_evtchn_to_irq(evtchn); + netif->tx_shmem_frame = tx_shmem_frame; + netif->rx_shmem_frame = rx_shmem_frame; + netif->tx = + (netif_tx_interface_t *)vma->addr; + netif->rx = + (netif_rx_interface_t *)((char *)vma->addr + PAGE_SIZE); + netif->status = CONNECTED; + netif_get(netif); + + netif->tx->resp_prod = netif->rx->resp_prod = 0; + + rtnl_lock(); + (void)dev_open(netif->dev); + rtnl_unlock(); + + (void)request_irq(netif->irq, netif_be_int, 0, netif->dev->name, netif); + netif_start_queue(netif->dev); + + connect->status = NETIF_BE_STATUS_OKAY; +} + +int netif_disconnect(netif_be_disconnect_t *disconnect, u8 rsp_id) +{ + domid_t domid = disconnect->domid; + unsigned int handle = disconnect->netif_handle; + netif_t *netif; + + netif = netif_find_by_handle(domid, handle); + if ( unlikely(netif == NULL) ) + { + DPRINTK("netif_disconnect attempted for non-existent netif" + " (%u,%u)\n", disconnect->domid, disconnect->netif_handle); + disconnect->status = NETIF_BE_STATUS_INTERFACE_NOT_FOUND; + return 1; /* Caller will send response error message. */ + } + + if ( netif->status == CONNECTED ) + { + netif->status = DISCONNECTING; + netif->disconnect_rspid = rsp_id; + wmb(); /* Let other CPUs see the status change. */ + netif_stop_queue(netif->dev); + free_irq(netif->irq, netif); + netif_deschedule(netif); + netif_put(netif); + return 0; /* Caller should not send response message. */ + } + + disconnect->status = NETIF_BE_STATUS_OKAY; + return 1; +} + +void netif_interface_init(void) +{ + memset(netif_hash, 0, sizeof(netif_hash)); +}