From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Tue, 7 Mar 2017 12:18:20 +0000 (+0000)
Subject: BCM270X_DT: Invert Pi3 power LED to match fw change
X-Git-Tag: archive/raspbian/4.9.51-1+rpi1~5^2~329
X-Git-Url: https://dgit.raspbian.org/?a=commitdiff_plain;h=3cd76839b8099f6f4033a36adbd790fbf9288498;p=linux-4.9.git

BCM270X_DT: Invert Pi3 power LED to match fw change

Firmware expgpio driver reworked due to complaint over
hotplug detect.
Requires power LED to change sense as firmware is no longer
inverting the read value.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
---

diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
index 173103aaca50..b21d2866d204 100644
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
@@ -175,7 +175,7 @@
 	pwr_led: pwr {
 		label = "led1";
 		linux,default-trigger = "input";
-		gpios = <&expgpio 7 GPIO_ACTIVE_LOW>;
+		gpios = <&expgpio 7 0>;
 	};
 };