From: Ian Campbell <ian.campbell@citrix.com>
Date: Thu, 22 Aug 2013 16:01:59 +0000 (+0100)
Subject: pl011: early_panic if baud rate not set in hardware
X-Git-Tag: archive/raspbian/4.8.0-1+rpi1~1^2~6448
X-Git-Url: https://dgit.raspbian.org/?a=commitdiff_plain;h=2050ad703c65ed997f1328af702054d1960fb168;p=xen.git

pl011: early_panic if baud rate not set in hardware

Now that the driver defaults to BAUD_AUTO this can happen if the early uart !=
console or if early printk isn't in use.

The following division by zero causes a trap but that uses regular printk and
not early_printk, so it is never seen.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
---

diff --git a/xen/drivers/char/pl011.c b/xen/drivers/char/pl011.c
index e4bd702f3f..3ea0d41f8c 100644
--- a/xen/drivers/char/pl011.c
+++ b/xen/drivers/char/pl011.c
@@ -104,6 +104,8 @@ static void __init pl011_init_preirq(struct serial_port *port)
     {
         /* Baud rate already set: read it out from the divisor latch. */
         divisor = (pl011_read(uart, IBRD) << 6) | (pl011_read(uart, FBRD));
+        if (!divisor)
+            early_panic("pl011: No Baud rate configured\n");
         uart->baud = (uart->clock_hz << 2) / divisor;
     }
     /* This write must follow FBRD and IBRD writes. */