download and build tboot: install-tboot, build-tboot, dist-tboot, clean-tboot.
These will download the latest tar file from the SourceForge site using wget,
then build/install/dist according to Xen's settings.
+
+Required Kernel modules
+======================
+
+Xen has a set of Kernel modules which the init scripts ensure to load before
+before starting Xen guests. The list of modules are maintained in one place:
+
+ * config/$(XEN_OS).modules
+
+For more details refer to:
+
+http://wiki.xen.org/wiki/Category:Host_Configuration#Kernel_modules
--- /dev/null
+# The file supports a simple language, comments are ignored, and if you there
+# are module replacements this can be listed by using a pipe to show preference
+# for the first module, followed by the older module.
+
+xen-evtchn
+xen-gntdev
+xen-gntalloc
+xen-blkback
+xen-netback
+xen-pciback
+evtchn
+gntdev
+netbk
+blkbk
+xen-scsibk
+usbbk
+pciback
+xen-acpi-processor
+# Prefer to load blktap2 if found, otherwise load blktap
+blktap2|blktap
UDEV_RULES = xen-backend.rules $(UDEV_RULES-y)
.PHONY: all
-all:
+all: $(XENCOMMONS_INITD)
+
+$(XENCOMMONS_INITD): $(XEN_ROOT)/config/$(XEN_OS).modules $(XENCOMMONS_INITD).in
+ $(XEN_ROOT)/tools/hotplug/Linux/update-modules.sh \
+ $(XEN_ROOT) \
+ $(XEN_OS) \
+ $(XENCOMMONS_INITD) > $@
.PHONY: build
-build:
+build: all
.PHONY: install
install: all install-initd install-scripts install-udev
# See docs/misc/distro_mapping.txt for INITD_DIR location
.PHONY: install-initd
-install-initd:
+install-initd: all
[ -d $(DESTDIR)$(INITD_DIR) ] || $(INSTALL_DIR) $(DESTDIR)$(INITD_DIR)
[ -d $(DESTDIR)$(SYSCONFIG_DIR) ] || $(INSTALL_DIR) $(DESTDIR)$(SYSCONFIG_DIR)
[ -d $(DESTDIR)$(LIBEXEC) ] || $(INSTALL_DIR) $(DESTDIR)$(LIBEXEC)
$(INSTALL_PROG) init.d/xen-watchdog $(DESTDIR)$(INITD_DIR)
.PHONY: install-scripts
-install-scripts:
+install-scripts: all
[ -d $(DESTDIR)$(XEN_SCRIPT_DIR) ] || \
$(INSTALL_DIR) $(DESTDIR)$(XEN_SCRIPT_DIR)
set -e; for i in $(XEN_SCRIPTS); \
+++ /dev/null
-#!/bin/bash
-#
-# xencommons Script to start and stop xenstored and xenconsoled
-#
-# Author: Ian Jackson <ian.jackson@eu.citrix.com>
-#
-# chkconfig: 2345 70 10
-# description: Starts and stops xenstored and xenconsoled
-### BEGIN INIT INFO
-# Provides: xenstored xenconsoled
-# Required-Start: $syslog $remote_fs
-# Should-Start:
-# Required-Stop: $syslog $remote_fs
-# Should-Stop:
-# Default-Start: 2 3 5
-# Default-Stop: 0 1 6
-# Short-Description: Start/stop xenstored and xenconsoled
-# Description: Starts and stops the daemons neeeded for xl/xend
-### END INIT INFO
-
-. /etc/xen/scripts/hotplugpath.sh
-
-if [ -d /etc/sysconfig ]; then
- xencommons_config=/etc/sysconfig
-else
- xencommons_config=/etc/default
-fi
-
-test -f $xencommons_config/xencommons && . $xencommons_config/xencommons
-
-XENCONSOLED_PIDFILE=/var/run/xenconsoled.pid
-QEMU_PIDFILE=/var/run/qemu-dom0.pid
-shopt -s extglob
-
-# not running in Xen dom0 or domU
-if ! test -d /proc/xen ; then
- exit 0
-fi
-
-# mount xenfs in dom0 or domU with a pv_ops kernel
-if test "x$1" = xstart && \
- ! test -f /proc/xen/capabilities && \
- ! grep '^xenfs ' /proc/mounts >/dev/null;
-then
- mount -t xenfs xenfs /proc/xen
-fi
-
-# run this script only in dom0:
-# no capabilities file in xenlinux domU kernel
-# empty capabilities file in pv_ops domU kernel
-if test -f /proc/xen/capabilities && \
- ! grep -q "control_d" /proc/xen/capabilities ; then
- exit 0
-fi
-
-do_start () {
- local time=0
- local timeout=30
-
- modprobe xen-evtchn 2>/dev/null
- modprobe xen-gntdev 2>/dev/null
- modprobe xen-gntalloc 2>/dev/null
- modprobe xen-blkback 2>/dev/null
- modprobe xen-netback 2>/dev/null
- modprobe xen-pciback 2>/dev/null
- modprobe evtchn 2>/dev/null
- modprobe gntdev 2>/dev/null
- modprobe netbk 2>/dev/null
- modprobe blkbk 2>/dev/null
- modprobe xen-scsibk 2>/dev/null
- modprobe usbbk 2>/dev/null
- modprobe pciback 2>/dev/null
- modprobe xen-acpi-processor 2>/dev/null
- modprobe blktap2 2>/dev/null || modprobe blktap 2>/dev/null
- mkdir -p /var/run/xen
-
- if ! `${BINDIR}/xenstore-read -s / >/dev/null 2>&1`
- then
- test -z "$XENSTORED_ROOTDIR" && XENSTORED_ROOTDIR="/var/lib/xenstored"
- rm -f "$XENSTORED_ROOTDIR"/tdb* &>/dev/null
- test -z "$XENSTORED_TRACE" || XENSTORED_ARGS=" -T /var/log/xen/xenstored-trace.log"
-
- if [ -n "$XENSTORED" ] ; then
- echo -n Starting $XENSTORED...
- $XENSTORED --pid-file /var/run/xenstored.pid $XENSTORED_ARGS
- elif [ -x ${SBINDIR}/oxenstored ] ; then
- echo -n Starting oxenstored...
- ${SBINDIR}/oxenstored --pid-file /var/run/xenstored.pid $XENSTORED_ARGS
- elif [ -x ${SBINDIR}/xenstored ] ; then
- echo -n Starting C xenstored...
- ${SBINDIR}/xenstored --pid-file /var/run/xenstored.pid $XENSTORED_ARGS
- else
- echo "No xenstored found"
- exit 1
- fi
-
- # Wait for xenstored to actually come up, timing out after 30 seconds
- while [ $time -lt $timeout ] && ! `${BINDIR}/xenstore-read -s / >/dev/null 2>&1` ; do
- echo -n .
- time=$(($time+1))
- sleep 1
- done
- echo
-
- # Exit if we timed out
- if ! [ $time -lt $timeout ] ; then
- echo Could not start xenstored
- exit 1
- fi
-
- echo Setting domain 0 name and domid...
- ${BINDIR}/xenstore-write "/local/domain/0/name" "Domain-0"
- ${BINDIR}/xenstore-write "/local/domain/0/domid" 0
- fi
-
- echo Starting xenconsoled...
- test -z "$XENCONSOLED_TRACE" || XENCONSOLED_ARGS=" --log=$XENCONSOLED_TRACE"
- ${SBINDIR}/xenconsoled --pid-file=$XENCONSOLED_PIDFILE $XENCONSOLED_ARGS
- echo Starting QEMU as disk backend for dom0
- test -z "$QEMU_XEN" && QEMU_XEN="${LIBEXEC}/qemu-system-i386"
- $QEMU_XEN -xen-domid 0 -xen-attach -name dom0 -nographic -M xenpv -daemonize \
- -monitor /dev/null -serial /dev/null -parallel /dev/null \
- -pidfile $QEMU_PIDFILE
-}
-do_stop () {
- echo Stopping xenconsoled
- if read 2>/dev/null <$XENCONSOLED_PIDFILE pid; then
- kill $pid
- while kill -9 $pid >/dev/null 2>&1; do sleep 0.1; done
- rm -f $XENCONSOLED_PIDFILE
- fi
-
- echo Stopping QEMU
- if read 2>/dev/null <$QEMU_PIDFILE pid; then
- kill $pid
- while kill -9 $pid >/dev/null 2>&1; do sleep 0.1; done
- rm -f $QEMU_PIDFILE
- fi
-
- echo WARNING: Not stopping xenstored, as it cannot be restarted.
-}
-
-case "$1" in
- start)
- do_start
- ;;
- status)
- ${BINDIR}/xenstore-read -s /
- ;;
- stop)
- do_stop
- ;;
- reload)
- echo >&2 'Reload not available; use force-reload'; exit 1
- ;;
- force-reload|restart)
- do_stop
- do_start
- ;;
- *)
- # do not advertise unreasonable commands that there is no reason
- # to use with this device
- echo $"Usage: $0 {start|stop|status|restart|force-reload}"
- exit 1
-esac
-
-exit $?
--- /dev/null
+#!/bin/bash
+#
+# xencommons Script to start and stop xenstored and xenconsoled
+#
+# Author: Ian Jackson <ian.jackson@eu.citrix.com>
+#
+# chkconfig: 2345 70 10
+# description: Starts and stops xenstored and xenconsoled
+### BEGIN INIT INFO
+# Provides: xenstored xenconsoled
+# Required-Start: $syslog $remote_fs
+# Should-Start:
+# Required-Stop: $syslog $remote_fs
+# Should-Stop:
+# Default-Start: 2 3 5
+# Default-Stop: 0 1 6
+# Short-Description: Start/stop xenstored and xenconsoled
+# Description: Starts and stops the daemons neeeded for xl/xend
+### END INIT INFO
+
+. /etc/xen/scripts/hotplugpath.sh
+
+if [ -d /etc/sysconfig ]; then
+ xencommons_config=/etc/sysconfig
+else
+ xencommons_config=/etc/default
+fi
+
+test -f $xencommons_config/xencommons && . $xencommons_config/xencommons
+
+XENCONSOLED_PIDFILE=/var/run/xenconsoled.pid
+QEMU_PIDFILE=/var/run/qemu-dom0.pid
+shopt -s extglob
+
+# not running in Xen dom0 or domU
+if ! test -d /proc/xen ; then
+ exit 0
+fi
+
+# mount xenfs in dom0 or domU with a pv_ops kernel
+if test "x$1" = xstart && \
+ ! test -f /proc/xen/capabilities && \
+ ! grep '^xenfs ' /proc/mounts >/dev/null;
+then
+ mount -t xenfs xenfs /proc/xen
+fi
+
+# run this script only in dom0:
+# no capabilities file in xenlinux domU kernel
+# empty capabilities file in pv_ops domU kernel
+if test -f /proc/xen/capabilities && \
+ ! grep -q "control_d" /proc/xen/capabilities ; then
+ exit 0
+fi
+
+do_start () {
+ local time=0
+ local timeout=30
+
+ @LOAD_MODULES@
+ mkdir -p /var/run/xen
+
+ if ! `${BINDIR}/xenstore-read -s / >/dev/null 2>&1`
+ then
+ test -z "$XENSTORED_ROOTDIR" && XENSTORED_ROOTDIR="/var/lib/xenstored"
+ rm -f "$XENSTORED_ROOTDIR"/tdb* &>/dev/null
+ test -z "$XENSTORED_TRACE" || XENSTORED_ARGS=" -T /var/log/xen/xenstored-trace.log"
+
+ if [ -n "$XENSTORED" ] ; then
+ echo -n Starting $XENSTORED...
+ $XENSTORED --pid-file /var/run/xenstored.pid $XENSTORED_ARGS
+ elif [ -x ${SBINDIR}/oxenstored ] ; then
+ echo -n Starting oxenstored...
+ ${SBINDIR}/oxenstored --pid-file /var/run/xenstored.pid $XENSTORED_ARGS
+ elif [ -x ${SBINDIR}/xenstored ] ; then
+ echo -n Starting C xenstored...
+ ${SBINDIR}/xenstored --pid-file /var/run/xenstored.pid $XENSTORED_ARGS
+ else
+ echo "No xenstored found"
+ exit 1
+ fi
+
+ # Wait for xenstored to actually come up, timing out after 30 seconds
+ while [ $time -lt $timeout ] && ! `${BINDIR}/xenstore-read -s / >/dev/null 2>&1` ; do
+ echo -n .
+ time=$(($time+1))
+ sleep 1
+ done
+ echo
+
+ # Exit if we timed out
+ if ! [ $time -lt $timeout ] ; then
+ echo Could not start xenstored
+ exit 1
+ fi
+
+ echo Setting domain 0 name and domid...
+ ${BINDIR}/xenstore-write "/local/domain/0/name" "Domain-0"
+ ${BINDIR}/xenstore-write "/local/domain/0/domid" 0
+ fi
+
+ echo Starting xenconsoled...
+ test -z "$XENCONSOLED_TRACE" || XENCONSOLED_ARGS=" --log=$XENCONSOLED_TRACE"
+ ${SBINDIR}/xenconsoled --pid-file=$XENCONSOLED_PIDFILE $XENCONSOLED_ARGS
+ echo Starting QEMU as disk backend for dom0
+ test -z "$QEMU_XEN" && QEMU_XEN="${LIBEXEC}/qemu-system-i386"
+ $QEMU_XEN -xen-domid 0 -xen-attach -name dom0 -nographic -M xenpv -daemonize \
+ -monitor /dev/null -serial /dev/null -parallel /dev/null \
+ -pidfile $QEMU_PIDFILE
+}
+do_stop () {
+ echo Stopping xenconsoled
+ if read 2>/dev/null <$XENCONSOLED_PIDFILE pid; then
+ kill $pid
+ while kill -9 $pid >/dev/null 2>&1; do sleep 0.1; done
+ rm -f $XENCONSOLED_PIDFILE
+ fi
+
+ echo Stopping QEMU
+ if read 2>/dev/null <$QEMU_PIDFILE pid; then
+ kill $pid
+ while kill -9 $pid >/dev/null 2>&1; do sleep 0.1; done
+ rm -f $QEMU_PIDFILE
+ fi
+
+ echo WARNING: Not stopping xenstored, as it cannot be restarted.
+}
+
+case "$1" in
+ start)
+ do_start
+ ;;
+ status)
+ ${BINDIR}/xenstore-read -s /
+ ;;
+ stop)
+ do_stop
+ ;;
+ reload)
+ echo >&2 'Reload not available; use force-reload'; exit 1
+ ;;
+ force-reload|restart)
+ do_stop
+ do_start
+ ;;
+ *)
+ # do not advertise unreasonable commands that there is no reason
+ # to use with this device
+ echo $"Usage: $0 {start|stop|status|restart|force-reload}"
+ exit 1
+esac
+
+exit $?
--- /dev/null
+#!/usr/bin/env bash
+
+set -e
+
+IFS=''
+
+XEN_ROOT=$1
+XEN_OS=$2
+XENCOMMONS_INITD=$3
+
+cat $XEN_ROOT/config/${XEN_OS}.modules | (
+ while read l ; do
+ if echo $l | egrep -q "^#" ; then
+ continue
+ fi
+ if echo "$l" | egrep -q "\|" ; then
+ m1=${l%%|*}
+ m2=${l#*|}
+ echo " modprobe $m1 2>/dev/null || modprobe $m2 2>/dev/null"
+ else
+ echo " modprobe $l 2>/dev/null"
+ fi
+ done
+) > ${XENCOMMONS_INITD}.modules
+
+cat ${XENCOMMONS_INITD}.in | (
+ while read l ; do
+ if echo "$l" | egrep -q "@LOAD_MODULES@" ; then
+ cat ${XENCOMMONS_INITD}.modules
+ else
+ echo $l
+ fi
+ done
+)
+
+rm -f ${XENCOMMONS_INITD}.modules
projects / xen.git / commitdiff