--- /dev/null
+Main authors (since 2008):
+
+Simon Prunet - prunet iap.fr
+Christophe Pichon - pichon iap.fr
+
+Other authors:
+- since 2016:
+Boud Roukema - boud cosmo.torun.pl
+
+Emails/affiliations are for identification only.
--- /dev/null
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.
--- /dev/null
+2017-01-28 boud
+ * v0.3.10 - portability: bypass fortran->C communicator types
+ Debian bug #851918 on the s390x architecture, by adding and using
+ two wrapper files: src/rfftw3d_mpi_create_plan_c_wrap.c,
+ src/wrap_rfftw3d_mod.f90
+
+2017-01-22 boud
+ * v0.3.8 - portability: reproducible lower precision printed floats;
+ iso_C_binding; avoid implementation-dependent integer sizes;
+ avoid implementation-dependent fortran kind values
+ * v0.3.9 - portability: lower precision printed float mppower.f90;
+ partial code tidying based on strict compiler warnings;
+ iseed, seeds -> c_long -> up to 4e9 cores can run with different seeds
+
+2017-01-20 boud
+ * v0.3.7.7 - regression test 0.3.7.7 - reduce required precision;
+ avoid implementation-dependent assumption on `kind' parameter value
+ * v0.3.7.8 - as for 0.3.7.7 but includes regression-test-0.3.7.8.sh
+ * v0.3.7.9 - regression test 0.3.7.9 - reduce required precision
+
+2017-01-19 boud
+ * v0.3.7.6 - regression test - remove deprecated openmpi/orte option
+
+2017-01-16 boud
+ * v0.3.7.2 - make check - avoid running as root if possible
+ * v0.3.7.3 - MPI_ALLOW_RUN_AS_ROOT - allow running make check as root
+ * v0.3.7.4 - --allow-run-as-root is specific to openmpi
+ * v0.3.7.5 revert allow-run-as-root related changes
+ - see thread: https://lists.debian.org/debian-mentors/2017/01/msg00322.html;
+ remove top Makefile.am `foreign' and `1.4' options
+
+2017-01-15 boud
+ * v0.3.6.4 - Regression test edit descriptors for reproducible floats
+ * v0.3.7 - rename 0.3.6.4 since it passes standard tests
+ * v0.3.7.1 - configure.ac: prioritise mpifort over deprecated (jessie
+ or earlier) mpif90
+
+2017-01-14 boud
+ * v0.3.6.2 - System and mpi-implementation dependence of code regression test
+ * v0.3.6.3 - regression test: s/return/exit/g
+
+2017-01-13 boud
+ * v0.3.6 - Simpler src/Makefile.am, .in, rm superfluous ltmain.sh
+ * v0.3.6.1 - Avoid regression test dependence on mktemp
+
+2017-01-12 boud
+ * v0.3.5 - Regression test - fast full run should match output for version 0.3.4
+
+2017-01-05 boud
+ * v0.3.4 - replace pause statements - obsolete since f90; whitespace changes
+ * v0.3.3 - minor changes motivated by debianisation
+
+2016-12-27 boud
+ * v0.3.2.1 - first debianisable version (tag v0.3.2 wrongly pushed)
+ * particle resolution: allow user to avoid recompiling for simple usage
+ * +minimal man page mpgrafic.1
+ * minimal GNU-style long and short options; hardwired in mpgrafic.f90
+ * autotools updates following: autoreconf -i -f
+ * add examples: Input.stdin, Output.stdout; for portability: compile
+ * tidying for debian version; rm kdevelop files obsolete, not essential
+ * +config.h.in - configure will not work without this
+
+2016-12-25 boud
+ * v0.3.1 - first version on bitbucket
+
+2016-12-24 boud + simon + christophe
+ * configure.ac: handle both fftw and [sd]fftw library names of fftw2
+ * parts of v0.3: +templates/gdl
+ * parts of v0.3: +gdl/idl routines, including licence GPLv2
+ * AUTHORS, README, insert GPLv2 licence in src/*
+ * c_gsl_wrap.c - without including gsl_randist.h, results are nonsense
+ * use GSL gaussian ziggurat directly - simpler random solution
+ * mpgrafic.f90: clarify that ramses comment is for very old ramses only
+ * parts of v0.3: Simon changes + s/non-free-rng/gsl_rng/g
+ * parts of v0.3: overflow correction nx*ny*nz; random num generator; not yet compilable
+
+2016-11-12 boud
+ * v0.2.1.1 +grafic1.inc in EXTRA_DIST
+ * v0.2.1 - minor changes - may not work for everyone
+ * mv configure.in configure.ac
+ * 1D number of particles: FCFLAGS=-DMPGRAFIC=32 ./configure
+ * configure.ac for debian/jessie; autoconf && ./configure && make
+
+2008-05-01 simon prunet + christophe pichon
+ * v0.2
+ * md2sum333e8eff20312a8a8227b0692dd547bc mpgrafic-0.2.tar.gz
+ * URL: ftp://ftp.iap.fr/pub/from_users/prunet/mpgrafic-0.2.tar.gz
--- /dev/null
+Installation Instructions
+*************************
+
+Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
+Inc.
+
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+ Briefly, the shell command `./configure && make && make install'
+should configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+ The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package, generally using the just-built uninstalled binaries.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
+
+ 6. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved. Use GNU `make'
+instead.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS
+ KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf limitation. Until the limitation is lifted, you can use
+this workaround:
+
+ CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
--- /dev/null
+4
+0.3,0.7,70
+0.05
+1
+-0.92
+0.01,100.0
+-50
+1
+0
+
+
+
+
+1
+1234
+white-outfile.dat
+0
+noisefile_dummy.dat
--- /dev/null
+SUBDIRS = src
+
+# Regression tests against older versions are included in the
+# distribution to enable easy checking of code and test evolution. The
+# script `regression-test-VERSION.sh' is only expected to return
+# the value 0 (success) for versions equal to or later than VERSION.
+
+TESTS = regression-test-0.3.7.9.sh
+
+EXTRA_DIST = regression-test-0.3.4.sh \
+ regression-test-0.3.7.sh \
+ regression-test-0.3.7.8.sh \
+ regression-test-0.3.7.9.sh \
+ Input.stdin Output.stdout Output.stdout.np32
--- /dev/null
+default: all
+
+all:
+ aclocal
+ autoheader
+ automake
+ autoconf
+
--- /dev/null
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
+ $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/configure $(am__configure_deps) \
+ $(srcdir)/config.h.in mkinstalldirs test-driver COPYING TODO \
+ compile config.guess config.sub depcomp install-sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ cscope check recheck distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+ $(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+am__tty_colors_dummy = \
+ mgn= red= grn= lgn= blu= brg= std=; \
+ am__color_tests=no
+am__tty_colors = { \
+ $(am__tty_colors_dummy); \
+ if test "X$(AM_COLOR_TESTS)" = Xno; then \
+ am__color_tests=no; \
+ elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+ am__color_tests=yes; \
+ elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+ am__color_tests=yes; \
+ fi; \
+ if test $$am__color_tests = yes; then \
+ red='\e[0;31m'; \
+ grn='\e[0;32m'; \
+ lgn='\e[1;32m'; \
+ blu='\e[1;34m'; \
+ mgn='\e[0;35m'; \
+ brg='\e[1m'; \
+ std='\e[m'; \
+ fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__recheck_rx = ^[ ]*:recheck:[ ]*
+am__global_test_result_rx = ^[ ]*:global-test-result:[ ]*
+am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+ recheck = 1; \
+ while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+ { \
+ if (rc < 0) \
+ { \
+ if ((getline line2 < ($$0 ".log")) < 0) \
+ recheck = 0; \
+ break; \
+ } \
+ else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+ { \
+ recheck = 0; \
+ break; \
+ } \
+ else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+ { \
+ break; \
+ } \
+ }; \
+ if (recheck) \
+ print $$0; \
+ close ($$0 ".trs"); \
+ close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+ print "fatal: making $@: " msg | "cat >&2"; \
+ exit 1; \
+} \
+function rst_section(header) \
+{ \
+ print header; \
+ len = length(header); \
+ for (i = 1; i <= len; i = i + 1) \
+ printf "="; \
+ printf "\n\n"; \
+} \
+{ \
+ copy_in_global_log = 1; \
+ global_test_result = "RUN"; \
+ while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+ { \
+ if (rc < 0) \
+ fatal("failed to read from " $$0 ".trs"); \
+ if (line ~ /$(am__global_test_result_rx)/) \
+ { \
+ sub("$(am__global_test_result_rx)", "", line); \
+ sub("[ ]*$$", "", line); \
+ global_test_result = line; \
+ } \
+ else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+ copy_in_global_log = 0; \
+ }; \
+ if (copy_in_global_log) \
+ { \
+ rst_section(global_test_result ": " $$0); \
+ while ((rc = (getline line < ($$0 ".log"))) != 0) \
+ { \
+ if (rc < 0) \
+ fatal("failed to read from " $$0 ".log"); \
+ print line; \
+ }; \
+ printf "\n"; \
+ }; \
+ close ($$0 ".trs"); \
+ close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+ --color-tests "$$am__color_tests" \
+ --enable-hard-errors "$$am__enable_hard_errors" \
+ --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test. Creates the
+# directory for the log if needed. Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log. Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup); \
+$(am__vpath_adj_setup) $(am__vpath_adj) \
+$(am__tty_colors); \
+srcdir=$(srcdir); export srcdir; \
+case "$@" in \
+ */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
+ *) am__odir=.;; \
+esac; \
+test "x$$am__odir" = x"." || test -d "$$am__odir" \
+ || $(MKDIR_P) "$$am__odir" || exit $$?; \
+if test -f "./$$f"; then dir=./; \
+elif test -f "$$f"; then dir=; \
+else dir="$(srcdir)/"; fi; \
+tst=$$dir$$f; log='$@'; \
+if test -n '$(DISABLE_HARD_ERRORS)'; then \
+ am__enable_hard_errors=no; \
+else \
+ am__enable_hard_errors=yes; \
+fi; \
+case " $(XFAIL_TESTS) " in \
+ *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
+ am__expect_failure=yes;; \
+ *) \
+ am__expect_failure=no;; \
+esac; \
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed). The result is saved in the shell variable
+# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+ bases='$(TEST_LOGS)'; \
+ bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+ bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+TEST_SUITE_LOG = test-suite.log
+TEST_EXTENSIONS = @EXEEXT@ .test
+LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+ case '$@' in \
+ */*) \
+ case '$*' in \
+ */*) b='$*';; \
+ *) b=`echo '$@' | sed 's/\.log$$//'`; \
+ esac;; \
+ *) \
+ b='$*';; \
+ esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.test.log=.log)
+TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+ $(TEST_LOG_FLAGS)
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCLIBS = @FCLIBS@
+FFLAGS = @FFLAGS@
+FFTWPREC = @FFTWPREC@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MPICC = @MPICC@
+MPIFC = @MPIFC@
+MPILIBS = @MPILIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PRECISION = @PRECISION@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = src
+
+# Regression tests against older versions are included in the
+# distribution to enable easy checking of code and test evolution. The
+# script `regression-test-VERSION.sh' is only expected to return
+# the value 0 (success) for versions equal to or later than VERSION.
+TESTS = regression-test-0.3.7.9.sh
+EXTRA_DIST = regression-test-0.3.4.sh \
+ regression-test-0.3.7.sh \
+ regression-test-0.3.7.8.sh \
+ regression-test-0.3.7.9.sh \
+ Input.stdin Output.stdout Output.stdout.np32
+
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .log .test .test$(EXEEXT) .trs
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+ @test -f $@ || rm -f stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: $(am__configure_deps)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+ rm -f $< $@
+ $(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+ @:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+ @$(am__set_TESTS_bases); \
+ am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+ redo_bases=`for i in $$bases; do \
+ am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+ done`; \
+ if test -n "$$redo_bases"; then \
+ redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+ redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+ if $(am__make_dryrun); then :; else \
+ rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+ fi; \
+ fi; \
+ if test -n "$$am__remaking_logs"; then \
+ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+ "recursion detected" >&2; \
+ else \
+ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+ fi; \
+ if $(am__make_dryrun); then :; else \
+ st=0; \
+ errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+ for i in $$redo_bases; do \
+ test -f $$i.trs && test -r $$i.trs \
+ || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+ test -f $$i.log && test -r $$i.log \
+ || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+ done; \
+ test $$st -eq 0 || exit 1; \
+ fi
+ @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+ ws='[ ]'; \
+ results=`for b in $$bases; do echo $$b.trs; done`; \
+ test -n "$$results" || results=/dev/null; \
+ all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
+ pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
+ fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
+ skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
+ xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+ xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+ error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+ if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+ success=true; \
+ else \
+ success=false; \
+ fi; \
+ br='==================='; br=$$br$$br$$br$$br; \
+ result_count () \
+ { \
+ if test x"$$1" = x"--maybe-color"; then \
+ maybe_colorize=yes; \
+ elif test x"$$1" = x"--no-color"; then \
+ maybe_colorize=no; \
+ else \
+ echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+ fi; \
+ shift; \
+ desc=$$1 count=$$2; \
+ if test $$maybe_colorize = yes && test $$count -gt 0; then \
+ color_start=$$3 color_end=$$std; \
+ else \
+ color_start= color_end=; \
+ fi; \
+ echo "$${color_start}# $$desc $$count$${color_end}"; \
+ }; \
+ create_testsuite_report () \
+ { \
+ result_count $$1 "TOTAL:" $$all "$$brg"; \
+ result_count $$1 "PASS: " $$pass "$$grn"; \
+ result_count $$1 "SKIP: " $$skip "$$blu"; \
+ result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+ result_count $$1 "FAIL: " $$fail "$$red"; \
+ result_count $$1 "XPASS:" $$xpass "$$red"; \
+ result_count $$1 "ERROR:" $$error "$$mgn"; \
+ }; \
+ { \
+ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
+ $(am__rst_title); \
+ create_testsuite_report --no-color; \
+ echo; \
+ echo ".. contents:: :depth: 2"; \
+ echo; \
+ for b in $$bases; do echo $$b; done \
+ | $(am__create_global_log); \
+ } >$(TEST_SUITE_LOG).tmp || exit 1; \
+ mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
+ if $$success; then \
+ col="$$grn"; \
+ else \
+ col="$$red"; \
+ test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
+ fi; \
+ echo "$${col}$$br$${std}"; \
+ echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
+ echo "$${col}$$br$${std}"; \
+ create_testsuite_report --maybe-color; \
+ echo "$$col$$br$$std"; \
+ if $$success; then :; else \
+ echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
+ if test -n "$(PACKAGE_BUGREPORT)"; then \
+ echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
+ fi; \
+ echo "$$col$$br$$std"; \
+ fi; \
+ $$success || exit 1
+
+check-TESTS:
+ @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
+ @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+ @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+ @set +e; $(am__set_TESTS_bases); \
+ log_list=`for i in $$bases; do echo $$i.log; done`; \
+ trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+ log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+ exit $$?;
+recheck: all
+ @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+ @set +e; $(am__set_TESTS_bases); \
+ bases=`for i in $$bases; do echo $$i; done \
+ | $(am__list_recheck_tests)` || exit 1; \
+ log_list=`for i in $$bases; do echo $$i.log; done`; \
+ log_list=`echo $$log_list`; \
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+ am__force_recheck=am--force-recheck \
+ TEST_LOGS="$$log_list"; \
+ exit $$?
+regression-test-0.3.7.9.sh.log: regression-test-0.3.7.9.sh
+ @p='regression-test-0.3.7.9.sh'; \
+ b='regression-test-0.3.7.9.sh'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+.test.log:
+ @p='$<'; \
+ $(am__set_b); \
+ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@ @p='$<'; \
+@am__EXEEXT_TRUE@ $(am__set_b); \
+@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__post_remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__post_remove_distdir)
+
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__post_remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__post_remove_distdir)
+
+dist-tarZ: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__post_remove_distdir)
+
+dist-shar: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__post_remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__post_remove_distdir)
+
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build \
+ && ../configure \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=.. --prefix="$$dc_install_base" \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__post_remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+ -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+ -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+ -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) all check-am install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+ am--refresh check check-TESTS check-am clean clean-cscope \
+ clean-generic cscope cscopelist-am ctags ctags-am dist \
+ dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
+ dist-xz dist-zip distcheck distclean distclean-generic \
+ distclean-hdr distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am recheck \
+ tags tags-am uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+mpgrafic NEWS -*- outline -*-
+
+* Main changes in release 0.3.10 (2017-01-28) [alpha]
+
+Debian bug #851918 for (at least) the s390x architecture
+https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=851918
+appears to be a problem between fftw2 and openmpi, related
+to the preprocessor macros MPI_COMM_F2C and FFTW_MPI_COMM_F2C,
+which are intended to provide implementation-independent
+conversion from fortran to C for MPI and fftw/MPI purposes.
+On s390x (at least), this has the bug indicated above -
+mpgrafic fails with MPI_Comm_dup reporting a fatal error.
+
+Since mpgrafic does not require a general fftw2/openmpi
+bux fix - it is a small program with only a few calls
+to fftw2 - a wrapper to `rfftw3d_mpi_create_plan', the
+only function subject to this bug and needed by mpgrafic,
+appears to solve this bug from mpgrafic's point of view.
+The two wrapper files are src/rfftw3d_mpi_create_plan_c_wrap.c
+and src/wrap_rfftw3d_mod.f90. ISO_C_binding is used
+to reduce the chance of future portability errors.
+
+* Main changes in release 0.3.9 (2017-01-22) [alpha]
+
+Previous versions stored the input `iseed' and the array `seeds'
+(generated by GSL using MT19937) as fortran `integer', which
+typically can be 16-bit, and on some machines might be 8-bit.
+That allowed at most 65536 distinct `seeds', so on a 10,000-core
+system, repeat elements of `seeds' would be extremely likely.
+In 0.3.9, the C long type is used, giving about 4e9 possible
+seeds. MaxRandNumStreams .eq. MaxParallelism in random.f90 limits
+the stored number of seeds.
+
+One minor reduction in printed float precision should enable the
+regression test (updated) to succeed on an i386 machine.
+
+* Main changes in release 0.3.8 (2017-01-22) [alpha]
+
+Portability: reproducible lower precision printed floats;
+iso_C_binding; avoid implementation-dependent integer sizes;
+avoid implementation-dependent fortran `kind' values.
+The portability improvements in 0.3.8 are only intended
+to cover some of the most likely sources of portability errors,
+and are unlikley to be complete.
+
+* Main changes in release 0.3.7 (2017-01-12) [alpha]
+
+A code regression test was added. Running this on future versions
+with `make check' should detect whether code changes have caused
+scientifically significant changes in the calculations.
+
+* Main changes in release 0.3.4 (2017-01-05) [alpha]
+
+Debianisation - a debian directory for preparing debian packets
+is available in the debian downstream version 0.3.4-1 at
+https://anonscm.debian.org/cgit/debian-astro/packages/mpgrafic.git/
--- /dev/null
+
+ Will generate initial conditions on grid of size 256 256 256
+
+ Select type of initial power spectrum (matter transfer function):
+ 1 for T(k) from linger.dat
+ 2 for T(k) from approx. analytical fit (BBKS)
+ 3 for T(k)=1 (scale-free)
+ 4 for T(k) from approx. analytical fit (E&Hu)
+ Enter case (1,2,3 or 4) now:
+ 4
+ Enter Omega_m, Omega_v, H0 (km/s/Mpc, set H0=1 for scale-free case)
+ 0.300000012 0.699999988 70.0000000
+ Enter Omega_b
+ 5.00000007E-02
+ Initializing power spectrum for Omega_m, Omega_v, H0= 0.300000012 0.699999988 70.0000000
+ Enter long-wave spectral index n (scale-invariant is n=1)
+ 1.00000000
+ Enter desired normalization at a=1:
+ Qrms-ps/micro-K (if > 0) or -sigma_8 (if < 0) = ?
+ Computing Delta_2(k) using Sachs-Wolfe approxmation
+ This may take several minutes.
+ Qrms-ps/micro-K= 20.5477428
+
+ I can write the power spectrum of delta_rho/rho to disk (power.dat).
+ If you would like this, please enter kmin and kmax (1/Mpc)
+ Enter 0,0 if you don't want the power spectrum written to a file
+ 9.99999978E-03 100.000000
+ Enter dx (initial particle spacing in Mpc, not Mpc/h)
+ or enter -boxlength in Mpc/h
+ i.e. dx in Mpc if > 0, or -boxlength in Mpc/h if < 0
+ -50.0000000
+ dx= 0.279017866 Mpc
+ Enter 1 if these initial conditions will not be refined, otherwise
+ enter the ultimate refinement factor for the smallest grid spacing
+ (This is used only to set astart.)
+ 1
+ Scaling initial conditions to starting a= 3.00068725E-02
+ when sigma(delta) at ultimate refinement scale= 0.200000003
+ vfact= 221.333496
+ Enter 0 for final output or 1 for further refinement
+ 0
+ Setting output grid to 256 256 256
+ Enter <RETURN> to skip output grid size
+ Enter <RETURN> to skip output grid offset
+ Enter <RETURN> to skip final grid size
+ Enter <RETURN> to skip final grid offset
+ Will produce output files ic_deltab, ic_velb[xyz], ic_velc[xyz]
+
+ Subgrid white noise:
+ Choose irand (1 or 2) from the following list:
+ irand=1 to generate new noise and save to file
+ irand=2 to read noise from existing file
+ Enter irand
+ 1
+ Enter random number seed (9-digit integer, ignored if irand=2)
+ 1234
+ Enter filename of white noise file (or <RETURN> if irand=0)
+ white-outfile.dat
+ Enter 1 if padding of large scales is required, 0 otherwise
+ 0
+ Enter padding file name (white noise format, ignored if ipad=0)
+ noisefile_dummy.dat
+ Warning: Generating new random numbers in mpic4!
+ myid,seeds: 0 822569775
+ Normalizing rms, subtracting average
+ Mean value of the white noise box = -2.3314084748130102E-004
+ Will be removed
+ Standard deviation of the white noise box = 0.99985838683469952
+ Will be factored out so that input stdev=1
+ ic4 white noise: chisq, dof, nu= 16777216.0 16777215 2.44140610E-04
+ Statistics of ic4 for idim, itide= 0 0
+ Mean sigma, sampled sigma, maximum= 0.243928477 0.243429005 1.40875602
+ Reading random numbers used in ic4 from white-outfile.dat
+ Random numbers generated with iseed= 1234
+ Normalizing rms, subtracting average
+ Mean value of the white noise box = -2.3314085176806781E-004
+ Will be removed
+ Standard deviation of the white noise box = 0.99985838683251660
+ Will be factored out so that input stdev=1
+ ic4 white noise: chisq, dof, nu= 16777216.0 16777215 2.44141935E-04
+ Statistics of ic4 for idim, itide= 1 0
+ Mean sigma, sampled sigma, maximum= 0.219509587 0.218785495 0.914245963
+ Reading random numbers used in ic4 from white-outfile.dat
+ Random numbers generated with iseed= 1234
+ Normalizing rms, subtracting average
+ Mean value of the white noise box = -2.3314085176806781E-004
+ Will be removed
+ Standard deviation of the white noise box = 0.99985838683251660
+ Will be factored out so that input stdev=1
+ ic4 white noise: chisq, dof, nu= 16777216.0 16777215 2.44141935E-04
+ Statistics of ic4 for idim, itide= 2 0
+ Mean sigma, sampled sigma, maximum= 0.219509587 0.204993233 0.792325854
+ Reading random numbers used in ic4 from white-outfile.dat
+ Random numbers generated with iseed= 1234
+ Normalizing rms, subtracting average
+ Mean value of the white noise box = -2.3314085176806781E-004
+ Will be removed
+ Standard deviation of the white noise box = 0.99985838683251660
+ Will be factored out so that input stdev=1
+ ic4 white noise: chisq, dof, nu= 16777216.0 16777215 2.44141935E-04
+ Statistics of ic4 for idim, itide= 3 0
+ Mean sigma, sampled sigma, maximum= 0.219509587 0.175664037 0.743286073
+ Reading random numbers used in ic4 from white-outfile.dat
+ Random numbers generated with iseed= 1234
+ Normalizing rms, subtracting average
+ Mean value of the white noise box = -2.3314085176806781E-004
+ Will be removed
+ Standard deviation of the white noise box = 0.99985838683251660
+ Will be factored out so that input stdev=1
+ ic4 white noise: chisq, dof, nu= 16777216.0 16777215 2.44141935E-04
+ Statistics of ic4 for idim, itide= 1 0
+ Mean sigma, sampled sigma, maximum= 0.219509587 0.218785346 0.922476888
+ Reading random numbers used in ic4 from white-outfile.dat
+ Random numbers generated with iseed= 1234
+ Normalizing rms, subtracting average
+ Mean value of the white noise box = -2.3314085176806781E-004
+ Will be removed
+ Standard deviation of the white noise box = 0.99985838683251660
+ Will be factored out so that input stdev=1
+ ic4 white noise: chisq, dof, nu= 16777216.0 16777215 2.44141935E-04
+ Statistics of ic4 for idim, itide= 2 0
+ Mean sigma, sampled sigma, maximum= 0.219509587 0.204993084 0.794799328
+ Reading random numbers used in ic4 from white-outfile.dat
+ Random numbers generated with iseed= 1234
+ Normalizing rms, subtracting average
+ Mean value of the white noise box = -2.3314085176806781E-004
+ Will be removed
+ Standard deviation of the white noise box = 0.99985838683251660
+ Will be factored out so that input stdev=1
+ ic4 white noise: chisq, dof, nu= 16777216.0 16777215 2.44141935E-04
+ Statistics of ic4 for idim, itide= 3 0
+ Mean sigma, sampled sigma, maximum= 0.219509587 0.175663874 0.748545229
--- /dev/null
+
+ Will generate initial conditions on grid of size 32 32 32
+
+ Select type of initial power spectrum (matter transfer function):
+ 1 for T(k) from linger.dat
+ 2 for T(k) from approx. analytical fit (BBKS)
+ 3 for T(k)=1 (scale-free)
+ 4 for T(k) from approx. analytical fit (E&Hu)
+ Enter case (1,2,3 or 4) now:
+ 4
+ Enter Omega_m, Omega_v, H0 (km/s/Mpc, set H0=1 for scale-free case)
+ 0.30000 0.70000 70.00000
+ Enter Omega_b
+ 0.05000
+ Initializing power spectrum for Omega_m, Omega_v, H0= 0.30000 0.70000 70.00000
+ Enter long-wave spectral index n (scale-invariant is n=1)
+ 1.00000
+ Enter desired normalization at a=1:
+ Qrms-ps/micro-K (if > 0) or -sigma_8 (if < 0) = ?
+ Computing Delta_2(k) using Sachs-Wolfe approxmation
+ This may take several minutes.
+Qrms-ps/micro-K= 20.5477
+
+ I can write the power spectrum of delta_rho/rho to disk (power.dat).
+ If you would like this, please enter kmin and kmax (1/Mpc)
+ Enter 0,0 if you don't want the power spectrum written to a file
+ 1.00000E-02 1.00000E+02
+ Enter dx (initial particle spacing in Mpc, not Mpc/h)
+ or enter -boxlength in Mpc/h
+ i.e. dx in Mpc if > 0, or -boxlength in Mpc/h if < 0
+ -50.00000
+ dx= 2.23214 Mpc
+ Enter 1 if these initial conditions will not be refined, otherwise
+ enter the ultimate refinement factor for the smallest grid spacing
+ (This is used only to set astart.)
+ 1
+Scaling initial conditions to starting a= 6.50320E-02
+ when sigma(delta) at ultimate refinement scale= 2.00000E-01
+vfact= 1.50343E+02
+ Enter 0 for final output or 1 for further refinement
+ 0
+ Setting output grid to 32 32 32
+ Enter <RETURN> to skip output grid size
+ Enter <RETURN> to skip output grid offset
+ Enter <RETURN> to skip final grid size
+ Enter <RETURN> to skip final grid offset
+ Will produce output files ic_deltab, ic_velb[xyz], ic_velc[xyz]
+
+ Subgrid white noise:
+ Choose irand (1 or 2) from the following list:
+ irand=1 to generate new noise and save to file
+ irand=2 to read noise from existing file
+ Enter irand
+ 1
+ Enter random number seed (9-digit integer, ignored if irand=2)
+ 1234
+ Enter filename of white noise file (or <RETURN> if irand=0)
+ white-outfile.dat
+ Enter 1 if padding of large scales is required, 0 otherwise
+ 0
+ Enter padding file name (white noise format, ignored if ipad=0)
+ noisefile_dummy.dat
+ Warning: Generating new random numbers in mpic4!
+ myid,seeds: 0 822569775
+ Normalizing rms, subtracting average
+Mean value of the white noise box = -2.25014E-03
+ Will be removed
+Standard deviation of the white noise box = 1.00099
+ Will be factored out so that input stdev=1
+ic4 white noise: chisq, dof, nu= 32768.00000 32767 5.52436E-03
+ Statistics of ic4 for idim, itide= 0 0
+ Mean sigma, sampled sigma, maximum= 0.26532 0.26629 1.06960
+ Reading random numbers used in ic4 from white-outfile.dat
+ Random numbers generated with iseed= 1234
+ Normalizing rms, subtracting average
+Mean value of the white noise box = -2.25014E-03
+ Will be removed
+Standard deviation of the white noise box = 1.00099
+ Will be factored out so that input stdev=1
+ic4 white noise: chisq, dof, nu= 32768.00000 32767 5.52436E-03
+ Statistics of ic4 for idim, itide= 1 0
+ Mean sigma, sampled sigma, maximum= 0.47112 0.39021 1.45201
+ Reading random numbers used in ic4 from white-outfile.dat
+ Random numbers generated with iseed= 1234
+ Normalizing rms, subtracting average
+Mean value of the white noise box = -2.25014E-03
+ Will be removed
+Standard deviation of the white noise box = 1.00099
+ Will be factored out so that input stdev=1
+ic4 white noise: chisq, dof, nu= 32768.00000 32767 5.52436E-03
+ Statistics of ic4 for idim, itide= 2 0
+ Mean sigma, sampled sigma, maximum= 0.47112 0.47917 1.99431
+ Reading random numbers used in ic4 from white-outfile.dat
+ Random numbers generated with iseed= 1234
+ Normalizing rms, subtracting average
+Mean value of the white noise box = -2.25014E-03
+ Will be removed
+Standard deviation of the white noise box = 1.00099
+ Will be factored out so that input stdev=1
+ic4 white noise: chisq, dof, nu= 32768.00000 32767 5.52436E-03
+ Statistics of ic4 for idim, itide= 3 0
+ Mean sigma, sampled sigma, maximum= 0.47112 0.54009 2.22725
+ Reading random numbers used in ic4 from white-outfile.dat
+ Random numbers generated with iseed= 1234
+ Normalizing rms, subtracting average
+Mean value of the white noise box = -2.25014E-03
+ Will be removed
+Standard deviation of the white noise box = 1.00099
+ Will be factored out so that input stdev=1
+ic4 white noise: chisq, dof, nu= 32768.00000 32767 5.52436E-03
+ Statistics of ic4 for idim, itide= 1 0
+ Mean sigma, sampled sigma, maximum= 0.47112 0.39014 1.45445
+ Reading random numbers used in ic4 from white-outfile.dat
+ Random numbers generated with iseed= 1234
+ Normalizing rms, subtracting average
+Mean value of the white noise box = -2.25014E-03
+ Will be removed
+Standard deviation of the white noise box = 1.00099
+ Will be factored out so that input stdev=1
+ic4 white noise: chisq, dof, nu= 32768.00000 32767 5.52436E-03
+ Statistics of ic4 for idim, itide= 2 0
+ Mean sigma, sampled sigma, maximum= 0.47112 0.47911 1.94102
+ Reading random numbers used in ic4 from white-outfile.dat
+ Random numbers generated with iseed= 1234
+ Normalizing rms, subtracting average
+Mean value of the white noise box = -2.25014E-03
+ Will be removed
+Standard deviation of the white noise box = 1.00099
+ Will be factored out so that input stdev=1
+ic4 white noise: chisq, dof, nu= 32768.00000 32767 5.52436E-03
+ Statistics of ic4 for idim, itide= 3 0
+ Mean sigma, sampled sigma, maximum= 0.47112 0.54004 2.20535
--- /dev/null
+mpgrafic - MPI version of Ed Bertschinger initial conditions grafic package
+
+Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon, Boud Roukema
+prunet iap.fr
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the
+Free Software Foundation, Inc.,
+59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+You should be able to compile with
+
+./configure && make
+
+and you will then find the executable
+
+src/mpgrafic
+
+See Input.input as an example input file, otherwise run mpgrafic
+interactively.
+
+If ./configure fails, then autotools should work. Try instead:
+
+autoconf && ./configure && make
+
+or
+
+autoreconf && ./configure && make
+
+See http://www2.iap.fr/users/pichon/mpgrafic.html for documentation.
+
+A git development version will soon be available at
+http://bitbucket.org/broukema/mpgrafic .
--- /dev/null
+* TODO items for mpgrafic development
+
+As of v0.3.7 these remain to be done. Tasks done: see NEWS.
+
+** Update to fftw3 [priority: high]
+ update from fftw2 dependence to fftw3 dependence:
+ - help: http://www.fftw.org/doc/Upgrading-from-FFTW-version-2.html
+ - in principle straightforward, but the upgrade has to
+ be done for the mpi, fortran90 version of fftw3
+
+** Portable modern fortran - kind [priority: medium]
+ replace declarations such as "real(kind=n)", where n is an integer,
+ by more portable values;
+ - https://gcc.gnu.org/onlinedocs/gcc-3.4.6/g77/Kind-Notation.html
+ - https://gcc.gnu.org/onlinedocs/gfortran/KIND-Type-Parameters.html
+ - one line in src/mpnorm.f90, many lines in random.f90
+
+** Portable fortran-C interfaces - replace number of underscores
+ (ADD0US, ADD1US, ADD2US) in preprocessor defines by ISO_C
+ methods
+
+** Licence GPL-2+ ? [priority: medium]
+ debate/decide: update from GPLv2+ to GPLv3+ ?
+ Why: https://www.gnu.org/licenses/quick-guide-gplv3.html
+
+** Doxygenise [priority: medium]
+ doxygen documentation extractable from source code
+
+** Keep or remove random.f90? [priority: low]
+ debate/decide: retain random.f90 for users unable/unwilling to
+ install GSL? or remove it?
+
+** Yorick scripts [priority: low]
--- /dev/null
+# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_mpi.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_MPI([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
+#
+# DESCRIPTION
+#
+# This macro tries to find out how to compile programs that use MPI
+# (Message Passing Interface), a standard API for parallel process
+# communication (see http://www-unix.mcs.anl.gov/mpi/)
+#
+# On success, it sets the MPICC, MPICXX, MPIF77, or MPIFC output variable
+# to the name of the MPI compiler, depending upon the current language.
+# (This may just be $CC/$CXX/$F77/$FC, but is more often something like
+# mpicc/mpiCC/mpif77/mpif90.) It also sets MPILIBS to any libraries that
+# are needed for linking MPI (e.g. -lmpi or -lfmpi, if a special
+# MPICC/MPICXX/MPIF77/MPIFC was not found).
+#
+# Note that this macro should be used only if you just have a few source
+# files that need to be compiled using MPI. In particular, you should
+# neither overwrite CC/CXX/F77/FC with the values of
+# MPICC/MPICXX/MPIF77/MPIFC, nor assume that you can use the same flags
+# etc. as the standard compilers. If you want to compile a whole program
+# using the MPI compiler commands, use one of the macros
+# AX_PROG_{CC,CXX,FC}_MPI.
+#
+# ACTION-IF-FOUND is a list of shell commands to run if an MPI library is
+# found, and ACTION-IF-NOT-FOUND is a list of commands to run if it is not
+# found. If ACTION-IF-FOUND is not specified, the default action will
+# define HAVE_MPI.
+#
+# LICENSE
+#
+# Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+# Copyright (c) 2008 Julian C. Cummings <cummings@cacr.caltech.edu>
+#
+# This program is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation, either version 3 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the respective Autoconf Macro's copyright owner
+# gives unlimited permission to copy, distribute and modify the configure
+# scripts that are the output of Autoconf when processing the Macro. You
+# need not follow the terms of the GNU General Public License when using
+# or distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
+#
+# This special exception to the GPL applies to versions of the Autoconf
+# Macro released by the Autoconf Archive. When you make and distribute a
+# modified version of the Autoconf Macro, you may extend this special
+# exception to the GPL to apply to your modified version as well.
+
+#serial 8
+
+AU_ALIAS([ACX_MPI], [AX_MPI])
+AC_DEFUN([AX_MPI], [
+AC_PREREQ(2.50) dnl for AC_LANG_CASE
+
+AC_LANG_CASE([C], [
+ AC_REQUIRE([AC_PROG_CC])
+ AC_ARG_VAR(MPICC,[MPI C compiler command])
+ AC_CHECK_PROGS(MPICC, mpicc hcc mpxlc_r mpxlc mpcc cmpicc, $CC)
+ ax_mpi_save_CC="$CC"
+ CC="$MPICC"
+ AC_SUBST(MPICC)
+],
+[C++], [
+ AC_REQUIRE([AC_PROG_CXX])
+ AC_ARG_VAR(MPICXX,[MPI C++ compiler command])
+ AC_CHECK_PROGS(MPICXX, mpic++ mpicxx mpiCC hcp mpxlC_r mpxlC mpCC cmpic++, $CXX)
+ ax_mpi_save_CXX="$CXX"
+ CXX="$MPICXX"
+ AC_SUBST(MPICXX)
+],
+[Fortran 77], [
+ AC_REQUIRE([AC_PROG_F77])
+ AC_ARG_VAR(MPIF77,[MPI Fortran 77 compiler command])
+ AC_CHECK_PROGS(MPIF77, mpif77 hf77 mpxlf_r mpxlf mpf77 cmpifc, $F77)
+ ax_mpi_save_F77="$F77"
+ F77="$MPIF77"
+ AC_SUBST(MPIF77)
+],
+[Fortran], [
+ AC_REQUIRE([AC_PROG_FC])
+ AC_ARG_VAR(MPIFC,[MPI Fortran compiler command])
+ AC_CHECK_PROGS(MPIFC, mpif90 mpxlf95_r mpxlf90_r mpxlf95 mpxlf90 mpf90 cmpif90c, $FC)
+ ax_mpi_save_FC="$FC"
+ FC="$MPIFC"
+ AC_SUBST(MPIFC)
+])
+
+if test x = x"$MPILIBS"; then
+ AC_LANG_CASE([C], [AC_CHECK_FUNC(MPI_Init, [MPILIBS=" "])],
+ [C++], [AC_CHECK_FUNC(MPI_Init, [MPILIBS=" "])],
+ [Fortran 77], [AC_MSG_CHECKING([for MPI_Init])
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[ call MPI_Init])],[MPILIBS=" "
+ AC_MSG_RESULT(yes)], [AC_MSG_RESULT(no)])],
+ [Fortran], [AC_MSG_CHECKING([for MPI_Init])
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[ call MPI_Init])],[MPILIBS=" "
+ AC_MSG_RESULT(yes)], [AC_MSG_RESULT(no)])])
+fi
+AC_LANG_CASE([Fortran 77], [
+ if test x = x"$MPILIBS"; then
+ AC_CHECK_LIB(fmpi, MPI_Init, [MPILIBS="-lfmpi"])
+ fi
+ if test x = x"$MPILIBS"; then
+ AC_CHECK_LIB(fmpich, MPI_Init, [MPILIBS="-lfmpich"])
+ fi
+],
+[Fortran], [
+ if test x = x"$MPILIBS"; then
+ AC_CHECK_LIB(fmpi, MPI_Init, [MPILIBS="-lfmpi"])
+ fi
+ if test x = x"$MPILIBS"; then
+ AC_CHECK_LIB(mpichf90, MPI_Init, [MPILIBS="-lmpichf90"])
+ fi
+])
+if test x = x"$MPILIBS"; then
+ AC_CHECK_LIB(mpi, MPI_Init, [MPILIBS="-lmpi"])
+fi
+if test x = x"$MPILIBS"; then
+ AC_CHECK_LIB(mpich, MPI_Init, [MPILIBS="-lmpich"])
+fi
+
+dnl We have to use AC_TRY_COMPILE and not AC_CHECK_HEADER because the
+dnl latter uses $CPP, not $CC (which may be mpicc).
+AC_LANG_CASE([C], [if test x != x"$MPILIBS"; then
+ AC_MSG_CHECKING([for mpi.h])
+ AC_TRY_COMPILE([#include <mpi.h>],[],[AC_MSG_RESULT(yes)], [MPILIBS=""
+ AC_MSG_RESULT(no)])
+fi],
+[C++], [if test x != x"$MPILIBS"; then
+ AC_MSG_CHECKING([for mpi.h])
+ AC_TRY_COMPILE([#include <mpi.h>],[],[AC_MSG_RESULT(yes)], [MPILIBS=""
+ AC_MSG_RESULT(no)])
+fi],
+[Fortran 77], [if test x != x"$MPILIBS"; then
+ AC_MSG_CHECKING([for mpif.h])
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[ include 'mpif.h'])],[AC_MSG_RESULT(yes)], [MPILIBS=""
+ AC_MSG_RESULT(no)])
+fi],
+[Fortran], [if test x != x"$MPILIBS"; then
+ AC_MSG_CHECKING([for mpif.h])
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[ include 'mpif.h'])],[AC_MSG_RESULT(yes)], [MPILIBS=""
+ AC_MSG_RESULT(no)])
+fi])
+
+AC_LANG_CASE([C], [CC="$ax_mpi_save_CC"],
+ [C++], [CXX="$ax_mpi_save_CXX"],
+ [Fortran 77], [F77="$ax_mpi_save_F77"],
+ [Fortran], [FC="$ax_mpi_save_FC"])
+
+AC_SUBST(MPILIBS)
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test x = x"$MPILIBS"; then
+ $2
+ :
+else
+ ifelse([$1],,[AC_DEFINE(HAVE_MPI,1,[Define if you have the MPI library.])],[$1])
+ :
+fi
+])dnl AX_MPI
+
+# Copyright (C) 2002-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.14'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.14.1], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.14.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
+ [$1], [CXX], [depcc="$CXX" am_compiler_list=],
+ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+ [$1], [UPC], [depcc="$UPC" am_compiler_list=],
+ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+ [--enable-dependency-tracking],
+ [do not reject slow dependency extractors])
+AS_HELP_STRING(
+ [--disable-dependency-tracking],
+ [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+ [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# -*- Autoconf -*-
+# Obsolete and "removed" macros, that must however still report explicit
+# error messages when used, to smooth transition.
+#
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([AM_CONFIG_HEADER],
+[AC_DIAGNOSE([obsolete],
+['$0': this macro is obsolete.
+You should use the 'AC][_CONFIG_HEADERS' macro instead.])dnl
+AC_CONFIG_HEADERS($@)])
+
+AC_DEFUN([AM_PROG_CC_STDC],
+[AC_PROG_CC
+am_cv_prog_cc_stdc=$ac_cv_prog_cc_stdc
+AC_DIAGNOSE([obsolete],
+['$0': this macro is obsolete.
+You should simply use the 'AC][_PROG_CC' macro instead.
+Also, your code should no longer depend upon 'am_cv_prog_cc_stdc',
+but upon 'ac_cv_prog_cc_stdc'.])])
+
+AC_DEFUN([AM_C_PROTOTYPES],
+ [AC_FATAL([automatic de-ANSI-fication support has been removed])])
+AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+ [whether $CC understands -c and -o together],
+ [am_cv_prog_cc_c_o],
+ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+ [--enable-silent-rules],
+ [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+ [--disable-silent-rules],
+ [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+ [am_cv_make_support_nested_variables],
+ [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+ dnl Using '$V' instead of '$(V)' breaks IRIX make.
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
+ rm -rf conftest.dir
+
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
--- /dev/null
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" "" $nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+ file=$1
+ case $file in
+ / | /[!/]*) # absolute file, and not a UNC file
+ if test -z "$file_conv"; then
+ # lazily determine how to convert abs files
+ case `uname -s` in
+ MINGW*)
+ file_conv=mingw
+ ;;
+ CYGWIN*)
+ file_conv=cygwin
+ ;;
+ *)
+ file_conv=wine
+ ;;
+ esac
+ fi
+ case $file_conv/,$2, in
+ *,$file_conv,*)
+ ;;
+ mingw/*)
+ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+ ;;
+ cygwin/*)
+ file=`cygpath -m "$file" || echo "$file"`
+ ;;
+ wine/*)
+ file=`winepath -w "$file" || echo "$file"`
+ ;;
+ esac
+ ;;
+ esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+ # Assume a capable shell
+ lib_path=
+ shared=:
+ linker_opts=
+ for arg
+ do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ eat=1
+ case $2 in
+ *.o | *.[oO][bB][jJ])
+ func_file_conv "$2"
+ set x "$@" -Fo"$file"
+ shift
+ ;;
+ *)
+ func_file_conv "$2"
+ set x "$@" -Fe"$file"
+ shift
+ ;;
+ esac
+ ;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -I*)
+ func_file_conv "${1#-I}" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -l*)
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
+ -L*)
+ func_cl_dashL "${1#-L}"
+ ;;
+ -static)
+ shared=false
+ ;;
+ -Wl,*)
+ arg=${1#-Wl,}
+ save_ifs="$IFS"; IFS=','
+ for flag in $arg; do
+ IFS="$save_ifs"
+ linker_opts="$linker_opts $flag"
+ done
+ IFS="$save_ifs"
+ ;;
+ -Xlinker)
+ eat=1
+ linker_opts="$linker_opts $2"
+ ;;
+ -*)
+ set x "$@" "$1"
+ shift
+ ;;
+ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+ func_file_conv "$1"
+ set x "$@" -Tp"$file"
+ shift
+ ;;
+ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+ func_file_conv "$1" mingw
+ set x "$@" "$file"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+ done
+ if test -n "$linker_opts"; then
+ linker_opts="-link$linker_opts"
+ fi
+ exec "$@" $linker_opts
+ exit 1
+}
+
+eat=
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+ func_cl_wrapper "$@" # Doesn't return...
+ ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ # So we strip '-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no '-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # '.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright 1992-2014 Free Software Foundation, Inc.
+
+timestamp='2014-03-23'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2014 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+ # If the system lacks a compiler, then just pick glibc.
+ # We could probably try harder.
+ LIBC=gnu
+
+ eval $set_cc_for_build
+ cat <<-EOF > $dummy.c
+ #include <features.h>
+ #if defined(__UCLIBC__)
+ LIBC=uclibc
+ #elif defined(__dietlibc__)
+ LIBC=dietlibc
+ #else
+ LIBC=gnu
+ #endif
+ EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
+ ;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ELF__
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit ;;
+ *:Bitrig:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+ exit ;;
+ *:OpenBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+ exitcode=$?
+ trap '' 0
+ exit $exitcode ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit ;;
+ arm*:riscos:*:*|arm*:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval $set_cc_for_build
+ SUN_ARCH="i386"
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH="x86_64"
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit ;;
+ *:AIX:*:[4567])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:FreeBSD:*:*)
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ case ${UNAME_PROCESSOR} in
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit ;;
+ *:MINGW64*:*)
+ echo ${UNAME_MACHINE}-pc-mingw64
+ exit ;;
+ *:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit ;;
+ *:MSYS*:*)
+ echo ${UNAME_MACHINE}-pc-msys
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit ;;
+ *:Interix*:*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ authenticamd | genuineintel | EM64T)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+ exit ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit ;;
+ aarch64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ aarch64_be:Linux:*:*)
+ UNAME_MACHINE=aarch64_be
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ arc:Linux:*:* | arceb:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ else
+ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_PCS_VFP
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+ fi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ cris:Linux:*:*)
+ echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ exit ;;
+ crisv32:Linux:*:*)
+ echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ exit ;;
+ frv:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ hexagon:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ i*86:Linux:*:*)
+ echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=${UNAME_MACHINE}el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=${UNAME_MACHINE}
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+ ;;
+ openrisc*:Linux:*:*)
+ echo or1k-unknown-linux-${LIBC}
+ exit ;;
+ or32:Linux:*:* | or1k*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-${LIBC}
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-${LIBC}
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+ PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+ *) echo hppa-unknown-linux-${LIBC} ;;
+ esac
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-${LIBC}
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-${LIBC}
+ exit ;;
+ ppc64le:Linux:*:*)
+ echo powerpc64le-unknown-linux-${LIBC}
+ exit ;;
+ ppcle:Linux:*:*)
+ echo powerpcle-unknown-linux-${LIBC}
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ tile*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+ exit ;;
+ x86_64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ x86_64:Haiku:*:*)
+ echo x86_64-unknown-haiku
+ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Darwin:*:*)
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ eval $set_cc_for_build
+ if test "$UNAME_PROCESSOR" = unknown ; then
+ UNAME_PROCESSOR=powerpc
+ fi
+ if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ case $UNAME_PROCESSOR in
+ i386) UNAME_PROCESSOR=x86_64 ;;
+ powerpc) UNAME_PROCESSOR=powerpc64 ;;
+ esac
+ fi
+ fi
+ elif test "$UNAME_PROCESSOR" = i386 ; then
+ # Avoid executing cc on OS X 10.9, as it ships with a stub
+ # that puts up a graphical alert prompting to install
+ # developer tools. Any system running Mac OS X 10.7 or
+ # later (Darwin 11 and later) is required to have a 64-bit
+ # processor. This is not true of the ARM version of Darwin
+ # that Apple uses in portable devices.
+ UNAME_PROCESSOR=x86_64
+ fi
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit ;;
+ NEO-?:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSE-*:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
+ exit ;;
+ x86_64:VMkernel:*:*)
+ echo ${UNAME_MACHINE}-unknown-esx
+ exit ;;
+esac
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if you have the `gcc' library (-lgcc). */
+#undef HAVE_LIBGCC
+
+/* Define to 1 if you have the `gsl' library (-lgsl). */
+#undef HAVE_LIBGSL
+
+/* Define to 1 if you have the `gslcblas' library (-lgslcblas). */
+#undef HAVE_LIBGSLCBLAS
+
+/* Define if you have the MPI library. */
+#undef HAVE_MPI
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Version number of package */
+#undef VERSION
--- /dev/null
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright 1992-2014 Free Software Foundation, Inc.
+
+timestamp='2014-09-11'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2014 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ android-linux)
+ os=-linux-android
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray | -microblaze*)
+ os=
+ basic_machine=$1
+ ;;
+ -bluegene*)
+ os=-cnk
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*178)
+ os=-lynxos178
+ ;;
+ -lynx*5)
+ os=-lynxos5
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | aarch64 | aarch64_be \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arceb \
+ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+ | avr | avr32 \
+ | be32 | be64 \
+ | bfin \
+ | c4x | c8051 | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | epiphany \
+ | fido | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | hexagon \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | k1om \
+ | le32 | le64 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64octeon | mips64octeonel \
+ | mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa32r6 | mipsisa32r6el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64r6 | mipsisa64r6el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipsr5900 | mipsr5900el \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | moxie \
+ | mt \
+ | msp430 \
+ | nds32 | nds32le | nds32be \
+ | nios | nios2 | nios2eb | nios2el \
+ | ns16k | ns32k \
+ | open8 | or1k | or1knd | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle \
+ | pyramid \
+ | riscv32 | riscv64 \
+ | rl78 | rx \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu \
+ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+ | we32k \
+ | x86 | xc16x | xstormy16 | xtensa \
+ | z8k | z80)
+ basic_machine=$basic_machine-unknown
+ ;;
+ c54x)
+ basic_machine=tic54x-unknown
+ ;;
+ c55x)
+ basic_machine=tic55x-unknown
+ ;;
+ c6x)
+ basic_machine=tic6x-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ strongarm | thumb | xscale)
+ basic_machine=arm-unknown
+ ;;
+ xgate)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ xscaleeb)
+ basic_machine=armeb-unknown
+ ;;
+
+ xscaleel)
+ basic_machine=armel-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | aarch64-* | aarch64_be-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* | avr32-* \
+ | be32-* | be64-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* \
+ | c8051-* | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | hexagon-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | k1om-* \
+ | le32-* | le64-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+ | microblaze-* | microblazeel-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64octeon-* | mips64octeonel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa32r6-* | mipsisa32r6el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64r6-* | mipsisa64r6el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipsr5900-* | mipsr5900el-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nds32-* | nds32le-* | nds32be-* \
+ | nios-* | nios2-* | nios2eb-* | nios2el-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | open8-* \
+ | or1k*-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+ | pyramid-* \
+ | rl78-* | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | tahoe-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tile*-* \
+ | tron-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+ | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* \
+ | xstormy16-* | xtensa*-* \
+ | ymp-* \
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c54x-*)
+ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c55x-*)
+ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c6x-*)
+ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16 | cr16-*)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ microblaze*)
+ basic_machine=microblaze-xilinx
+ ;;
+ mingw64)
+ basic_machine=x86_64-pc
+ os=-mingw64
+ ;;
+ mingw32)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ moxiebox)
+ basic_machine=moxie-unknown
+ os=-moxiebox
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
+ msys)
+ basic_machine=i686-pc
+ os=-msys
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ nacl)
+ basic_machine=le32-unknown
+ os=-nacl
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ neo-tandem)
+ basic_machine=neo-tandem
+ ;;
+ nse-tandem)
+ basic_machine=nse-tandem
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc | ppcbe) basic_machine=powerpc-unknown
+ ;;
+ ppc-* | ppcbe-*)
+ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rdos | rdos64)
+ basic_machine=x86_64-pc
+ os=-rdos
+ ;;
+ rdos32)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ strongarm-* | thumb-*)
+ basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tile*)
+ basic_machine=$basic_machine-unknown
+ os=-linux-gnu
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ xscale-* | xscalee[bl]-*)
+ basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+ | -sym* | -kopensolaris* | -plan9* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* | -aros* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -bitrig* | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -nacl*)
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ c8051-*)
+ os=-elf
+ ;;
+ hexagon-*)
+ os=-elf
+ ;;
+ tic54x-*)
+ os=-coff
+ ;;
+ tic55x-*)
+ os=-coff
+ ;;
+ tic6x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mep-*)
+ os=-elf
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-haiku)
+ os=-haiku
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -cnk*|-aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for mpgrafic 0.3.10.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='mpgrafic'
+PACKAGE_TARNAME='mpgrafic'
+PACKAGE_VERSION='0.3.10'
+PACKAGE_STRING='mpgrafic 0.3.10'
+PACKAGE_BUGREPORT=''
+PACKAGE_URL=''
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+MPILIBS
+MPICC
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+ac_ct_CC
+CPPFLAGS
+CFLAGS
+CC
+ac_ct_F77
+FFLAGS
+F77
+FFTWPREC
+PRECISION
+FCLIBS
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+MPIFC
+OBJEXT
+EXEEXT
+ac_ct_FC
+LDFLAGS
+FCFLAGS
+FC
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_silent_rules
+enable_single
+enable_dependency_tracking
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+FC
+FCFLAGS
+LDFLAGS
+LIBS
+MPIFC
+PRECISION
+FFTWPREC
+F77
+FFLAGS
+CC
+CFLAGS
+CPPFLAGS
+MPICC'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures mpgrafic 0.3.10 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/mpgrafic]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of mpgrafic 0.3.10:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-silent-rules less verbose build output (undo: "make V=1")
+ --disable-silent-rules verbose build output (undo: "make V=0")
+ --enable-single use single precision (default is double)
+ --enable-dependency-tracking
+ do not reject slow dependency extractors
+ --disable-dependency-tracking
+ speeds up one-time build
+
+Some influential environment variables:
+ FC Fortran compiler command
+ FCFLAGS Fortran compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ MPIFC MPI Fortran compiler command
+ PRECISION Single or double precision calculations
+ FFTWPREC fftw precision prefix
+ F77 Fortran 77 compiler command
+ FFLAGS Fortran 77 compiler flags
+ CC C compiler command
+ CFLAGS C compiler flags
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ MPICC MPI C compiler command
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+mpgrafic configure 0.3.10
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_fc_try_compile LINENO
+# ---------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_fc_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_fc_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_fc_try_compile
+
+# ac_fn_f77_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_f77_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_f77_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_f77_try_compile
+
+# ac_fn_f77_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_f77_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_f77_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_f77_try_link
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by mpgrafic $as_me 0.3.10, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+#AC_CONFIG_SRCDIR([src/mpgrafic.f90])
+am__api_version='1.14'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if ${ac_cv_path_mkdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='mpgrafic'
+ VERSION='0.3.10'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+# MPI stuff
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn nagfor xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_FC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$FC"; then
+ ac_cv_prog_FC="$FC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_FC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+FC=$ac_cv_prog_FC
+if test -n "$FC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FC" >&5
+$as_echo "$FC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$FC" && break
+ done
+fi
+if test -z "$FC"; then
+ ac_ct_FC=$FC
+ for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn nagfor xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_FC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_FC"; then
+ ac_cv_prog_ac_ct_FC="$ac_ct_FC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_FC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_FC=$ac_cv_prog_ac_ct_FC
+if test -n "$ac_ct_FC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_FC" >&5
+$as_echo "$ac_ct_FC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_FC" && break
+done
+
+ if test "x$ac_ct_FC" = x; then
+ FC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ FC=$ac_ct_FC
+ fi
+fi
+
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+rm -f a.out
+
+cat > conftest.$ac_ext <<_ACEOF
+ program main
+
+ end
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the Fortran compiler works" >&5
+$as_echo_n "checking whether the Fortran compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "Fortran compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran compiler default output file name" >&5
+$as_echo_n "checking for Fortran compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat > conftest.$ac_ext <<_ACEOF
+ program main
+ open(unit=9,file='conftest.out')
+ close(unit=9)
+
+ end
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run Fortran compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat > conftest.$ac_ext <<_ACEOF
+ program main
+
+ end
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+# If we don't use `.F' as extension, the preprocessor is not run on the
+# input file. (Note that this only needs to work for GNU compilers.)
+ac_save_ext=$ac_ext
+ac_ext=F
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Fortran compiler" >&5
+$as_echo_n "checking whether we are using the GNU Fortran compiler... " >&6; }
+if ${ac_cv_fc_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat > conftest.$ac_ext <<_ACEOF
+ program main
+#ifndef __GNUC__
+ choke me
+#endif
+
+ end
+_ACEOF
+if ac_fn_fc_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_fc_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_compiler_gnu" >&5
+$as_echo "$ac_cv_fc_compiler_gnu" >&6; }
+ac_ext=$ac_save_ext
+ac_test_FCFLAGS=${FCFLAGS+set}
+ac_save_FCFLAGS=$FCFLAGS
+FCFLAGS=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $FC accepts -g" >&5
+$as_echo_n "checking whether $FC accepts -g... " >&6; }
+if ${ac_cv_prog_fc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ FCFLAGS=-g
+cat > conftest.$ac_ext <<_ACEOF
+ program main
+
+ end
+_ACEOF
+if ac_fn_fc_try_compile "$LINENO"; then :
+ ac_cv_prog_fc_g=yes
+else
+ ac_cv_prog_fc_g=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_g" >&5
+$as_echo "$ac_cv_prog_fc_g" >&6; }
+if test "$ac_test_FCFLAGS" = set; then
+ FCFLAGS=$ac_save_FCFLAGS
+elif test $ac_cv_prog_fc_g = yes; then
+ if test "x$ac_cv_fc_compiler_gnu" = xyes; then
+ FCFLAGS="-g -O2"
+ else
+ FCFLAGS="-g"
+ fi
+else
+ if test "x$ac_cv_fc_compiler_gnu" = xyes; then
+ FCFLAGS="-O2"
+ else
+ FCFLAGS=
+ fi
+fi
+
+if test $ac_compiler_gnu = yes; then
+ GFC=yes
+else
+ GFC=
+fi
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+
+for ac_prog in mpifort mpif90 mpxlf95_r mpxlf90_r mpxlf95 mpxlf90 mpf90 cmpif90c
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MPIFC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$MPIFC"; then
+ ac_cv_prog_MPIFC="$MPIFC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_MPIFC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+MPIFC=$ac_cv_prog_MPIFC
+if test -n "$MPIFC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MPIFC" >&5
+$as_echo "$MPIFC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$MPIFC" && break
+done
+test -n "$MPIFC" || MPIFC="$FC"
+
+FC="$MPIFC"
+F77="$FC"
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to get verbose linking output from $FC" >&5
+$as_echo_n "checking how to get verbose linking output from $FC... " >&6; }
+if ${ac_cv_prog_fc_v+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat > conftest.$ac_ext <<_ACEOF
+ program main
+
+ end
+_ACEOF
+if ac_fn_fc_try_compile "$LINENO"; then :
+ ac_cv_prog_fc_v=
+# Try some options frequently used verbose output
+for ac_verb in -v -verbose --verbose -V -\#\#\#; do
+ cat > conftest.$ac_ext <<_ACEOF
+ program main
+
+ end
+_ACEOF
+
+# Compile and link our simple test program by passing a flag (argument
+# 1 to this macro) to the Fortran compiler in order to get
+# "verbose" output that we can then parse for the Fortran linker
+# flags.
+ac_save_FCFLAGS=$FCFLAGS
+FCFLAGS="$FCFLAGS $ac_verb"
+eval "set x $ac_link"
+shift
+$as_echo "$as_me:${as_lineno-$LINENO}: $*" >&5
+# gfortran 4.3 outputs lines setting COLLECT_GCC_OPTIONS, COMPILER_PATH,
+# LIBRARY_PATH; skip all such settings.
+ac_fc_v_output=`eval $ac_link 5>&1 2>&1 |
+ sed '/^Driving:/d; /^Configured with:/d;
+ '"/^[_$as_cr_Letters][_$as_cr_alnum]*=/d"`
+$as_echo "$ac_fc_v_output" >&5
+FCFLAGS=$ac_save_FCFLAGS
+
+rm -rf conftest*
+
+# On HP/UX there is a line like: "LPATH is: /foo:/bar:/baz" where
+# /foo, /bar, and /baz are search directories for the Fortran linker.
+# Here, we change these into -L/foo -L/bar -L/baz (and put it first):
+ac_fc_v_output="`echo $ac_fc_v_output |
+ grep 'LPATH is:' |
+ sed 's|.*LPATH is\(: *[^ ]*\).*|\1|;s|: */| -L/|g'` $ac_fc_v_output"
+
+# FIXME: we keep getting bitten by quoted arguments; a more general fix
+# that detects unbalanced quotes in FLIBS should be implemented
+# and (ugh) tested at some point.
+case $ac_fc_v_output in
+ # With xlf replace commas with spaces,
+ # and remove "-link" and closing parenthesis.
+ *xlfentry*)
+ ac_fc_v_output=`echo $ac_fc_v_output |
+ sed '
+ s/,/ /g
+ s/ -link / /g
+ s/) *$//
+ '
+ ` ;;
+
+ # With Intel ifc, ignore the quoted -mGLOB_options_string stuff (quoted
+ # $LIBS confuse us, and the libraries appear later in the output anyway).
+ *mGLOB_options_string*)
+ ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"-mGLOB[^"]*"/ /g'` ;;
+
+ # Portland Group compiler has singly- or doubly-quoted -cmdline argument
+ # Singly-quoted arguments were reported for versions 5.2-4 and 6.0-4.
+ # Doubly-quoted arguments were reported for "PGF90/x86 Linux/x86 5.0-2".
+ *-cmdline\ * | *-ignore\ * | *-def\ *)
+ ac_fc_v_output=`echo $ac_fc_v_output | sed "\
+ s/-cmdline *'[^']*'/ /g; s/-cmdline *\"[^\"]*\"/ /g
+ s/-ignore *'[^']*'/ /g; s/-ignore *\"[^\"]*\"/ /g
+ s/-def *'[^']*'/ /g; s/-def *\"[^\"]*\"/ /g"` ;;
+
+ # If we are using fort77 (the f2c wrapper) then filter output and delete quotes.
+ *fort77*f2c*gcc*)
+ ac_fc_v_output=`echo "$ac_fc_v_output" | sed -n '
+ /:[ ]\+Running[ ]\{1,\}"gcc"/{
+ /"-c"/d
+ /[.]c"*/d
+ s/^.*"gcc"/"gcc"/
+ s/"//gp
+ }'` ;;
+
+ # If we are using Cray Fortran then delete quotes.
+ *cft90*)
+ ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"//g'` ;;
+esac
+
+
+ # look for -l* and *.a constructs in the output
+ for ac_arg in $ac_fc_v_output; do
+ case $ac_arg in
+ [\\/]*.a | ?:[\\/]*.a | -[lLRu]*)
+ ac_cv_prog_fc_v=$ac_verb
+ break 2 ;;
+ esac
+ done
+done
+if test -z "$ac_cv_prog_fc_v"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot determine how to obtain linking information from $FC" >&5
+$as_echo "$as_me: WARNING: cannot determine how to obtain linking information from $FC" >&2;}
+fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: compilation failed" >&5
+$as_echo "$as_me: WARNING: compilation failed" >&2;}
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_v" >&5
+$as_echo "$ac_cv_prog_fc_v" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran libraries of $FC" >&5
+$as_echo_n "checking for Fortran libraries of $FC... " >&6; }
+if ${ac_cv_fc_libs+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$FCLIBS" != "x"; then
+ ac_cv_fc_libs="$FCLIBS" # Let the user override the test.
+else
+
+cat > conftest.$ac_ext <<_ACEOF
+ program main
+
+ end
+_ACEOF
+
+# Compile and link our simple test program by passing a flag (argument
+# 1 to this macro) to the Fortran compiler in order to get
+# "verbose" output that we can then parse for the Fortran linker
+# flags.
+ac_save_FCFLAGS=$FCFLAGS
+FCFLAGS="$FCFLAGS $ac_cv_prog_fc_v"
+eval "set x $ac_link"
+shift
+$as_echo "$as_me:${as_lineno-$LINENO}: $*" >&5
+# gfortran 4.3 outputs lines setting COLLECT_GCC_OPTIONS, COMPILER_PATH,
+# LIBRARY_PATH; skip all such settings.
+ac_fc_v_output=`eval $ac_link 5>&1 2>&1 |
+ sed '/^Driving:/d; /^Configured with:/d;
+ '"/^[_$as_cr_Letters][_$as_cr_alnum]*=/d"`
+$as_echo "$ac_fc_v_output" >&5
+FCFLAGS=$ac_save_FCFLAGS
+
+rm -rf conftest*
+
+# On HP/UX there is a line like: "LPATH is: /foo:/bar:/baz" where
+# /foo, /bar, and /baz are search directories for the Fortran linker.
+# Here, we change these into -L/foo -L/bar -L/baz (and put it first):
+ac_fc_v_output="`echo $ac_fc_v_output |
+ grep 'LPATH is:' |
+ sed 's|.*LPATH is\(: *[^ ]*\).*|\1|;s|: */| -L/|g'` $ac_fc_v_output"
+
+# FIXME: we keep getting bitten by quoted arguments; a more general fix
+# that detects unbalanced quotes in FLIBS should be implemented
+# and (ugh) tested at some point.
+case $ac_fc_v_output in
+ # With xlf replace commas with spaces,
+ # and remove "-link" and closing parenthesis.
+ *xlfentry*)
+ ac_fc_v_output=`echo $ac_fc_v_output |
+ sed '
+ s/,/ /g
+ s/ -link / /g
+ s/) *$//
+ '
+ ` ;;
+
+ # With Intel ifc, ignore the quoted -mGLOB_options_string stuff (quoted
+ # $LIBS confuse us, and the libraries appear later in the output anyway).
+ *mGLOB_options_string*)
+ ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"-mGLOB[^"]*"/ /g'` ;;
+
+ # Portland Group compiler has singly- or doubly-quoted -cmdline argument
+ # Singly-quoted arguments were reported for versions 5.2-4 and 6.0-4.
+ # Doubly-quoted arguments were reported for "PGF90/x86 Linux/x86 5.0-2".
+ *-cmdline\ * | *-ignore\ * | *-def\ *)
+ ac_fc_v_output=`echo $ac_fc_v_output | sed "\
+ s/-cmdline *'[^']*'/ /g; s/-cmdline *\"[^\"]*\"/ /g
+ s/-ignore *'[^']*'/ /g; s/-ignore *\"[^\"]*\"/ /g
+ s/-def *'[^']*'/ /g; s/-def *\"[^\"]*\"/ /g"` ;;
+
+ # If we are using fort77 (the f2c wrapper) then filter output and delete quotes.
+ *fort77*f2c*gcc*)
+ ac_fc_v_output=`echo "$ac_fc_v_output" | sed -n '
+ /:[ ]\+Running[ ]\{1,\}"gcc"/{
+ /"-c"/d
+ /[.]c"*/d
+ s/^.*"gcc"/"gcc"/
+ s/"//gp
+ }'` ;;
+
+ # If we are using Cray Fortran then delete quotes.
+ *cft90*)
+ ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"//g'` ;;
+esac
+
+
+
+ac_cv_fc_libs=
+
+# Save positional arguments (if any)
+ac_save_positional="$@"
+
+set X $ac_fc_v_output
+while test $# != 1; do
+ shift
+ ac_arg=$1
+ case $ac_arg in
+ [\\/]*.a | ?:[\\/]*.a)
+ ac_exists=false
+ for ac_i in $ac_cv_fc_libs; do
+ if test x"$ac_arg" = x"$ac_i"; then
+ ac_exists=true
+ break
+ fi
+ done
+
+ if test x"$ac_exists" = xtrue; then :
+
+else
+ ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg"
+fi
+ ;;
+ -bI:*)
+ ac_exists=false
+ for ac_i in $ac_cv_fc_libs; do
+ if test x"$ac_arg" = x"$ac_i"; then
+ ac_exists=true
+ break
+ fi
+ done
+
+ if test x"$ac_exists" = xtrue; then :
+
+else
+ if test "$ac_compiler_gnu" = yes; then
+ for ac_link_opt in $ac_arg; do
+ ac_cv_fc_libs="$ac_cv_fc_libs -Xlinker $ac_link_opt"
+ done
+else
+ ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg"
+fi
+fi
+ ;;
+ # Ignore these flags.
+ -lang* | -lcrt*.o | -lc | -lgcc* | -lSystem | -libmil | -little \
+ |-LANG:=* | -LIST:* | -LNO:* | -link)
+ ;;
+ -lkernel32)
+ case $host_os in
+ *cygwin*) ;;
+ *) ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg"
+ ;;
+ esac
+ ;;
+ -[LRuYz])
+ # These flags, when seen by themselves, take an argument.
+ # We remove the space between option and argument and re-iterate
+ # unless we find an empty arg or a new option (starting with -)
+ case $2 in
+ "" | -*);;
+ *)
+ ac_arg="$ac_arg$2"
+ shift; shift
+ set X $ac_arg "$@"
+ ;;
+ esac
+ ;;
+ -YP,*)
+ for ac_j in `$as_echo "$ac_arg" | sed -e 's/-YP,/-L/;s/:/ -L/g'`; do
+ ac_exists=false
+ for ac_i in $ac_cv_fc_libs; do
+ if test x"$ac_j" = x"$ac_i"; then
+ ac_exists=true
+ break
+ fi
+ done
+
+ if test x"$ac_exists" = xtrue; then :
+
+else
+ ac_arg="$ac_arg $ac_j"
+ ac_cv_fc_libs="$ac_cv_fc_libs $ac_j"
+fi
+ done
+ ;;
+ -[lLR]*)
+ ac_exists=false
+ for ac_i in $ac_cv_fc_libs; do
+ if test x"$ac_arg" = x"$ac_i"; then
+ ac_exists=true
+ break
+ fi
+ done
+
+ if test x"$ac_exists" = xtrue; then :
+
+else
+ ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg"
+fi
+ ;;
+ -zallextract*| -zdefaultextract)
+ ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg"
+ ;;
+ # Ignore everything else.
+ esac
+done
+# restore positional arguments
+set X $ac_save_positional; shift
+
+# We only consider "LD_RUN_PATH" on Solaris systems. If this is seen,
+# then we insist that the "run path" must be an absolute path (i.e. it
+# must begin with a "/").
+case `(uname -sr) 2>/dev/null` in
+ "SunOS 5"*)
+ ac_ld_run_path=`$as_echo "$ac_fc_v_output" |
+ sed -n 's,^.*LD_RUN_PATH *= *\(/[^ ]*\).*$,-R\1,p'`
+ test "x$ac_ld_run_path" != x &&
+ if test "$ac_compiler_gnu" = yes; then
+ for ac_link_opt in $ac_ld_run_path; do
+ ac_cv_fc_libs="$ac_cv_fc_libs -Xlinker $ac_link_opt"
+ done
+else
+ ac_cv_fc_libs="$ac_cv_fc_libs $ac_ld_run_path"
+fi
+ ;;
+esac
+fi # test "x$[]_AC_LANG_PREFIX[]LIBS" = "x"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_libs" >&5
+$as_echo "$ac_cv_fc_libs" >&6; }
+FCLIBS="$ac_cv_fc_libs"
+
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+
+
+# Precision
+
+# Check whether --enable-single was given.
+if test "${enable_single+set}" = set; then :
+ enableval=$enable_single; use_single=yes
+else
+ use_single=no
+fi
+
+
+
+if test x$use_single = xyes; then
+ ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn nagfor
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_F77+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$F77"; then
+ ac_cv_prog_F77="$F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+F77=$ac_cv_prog_F77
+if test -n "$F77"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $F77" >&5
+$as_echo "$F77" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$F77" && break
+ done
+fi
+if test -z "$F77"; then
+ ac_ct_F77=$F77
+ for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn nagfor
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_F77+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_F77"; then
+ ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_F77="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_F77=$ac_cv_prog_ac_ct_F77
+if test -n "$ac_ct_F77"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_F77" >&5
+$as_echo "$ac_ct_F77" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_F77" && break
+done
+
+ if test "x$ac_ct_F77" = x; then
+ F77=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ F77=$ac_ct_F77
+ fi
+fi
+
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran 77 compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+rm -f a.out
+
+# If we don't use `.F' as extension, the preprocessor is not run on the
+# input file. (Note that this only needs to work for GNU compilers.)
+ac_save_ext=$ac_ext
+ac_ext=F
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Fortran 77 compiler" >&5
+$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; }
+if ${ac_cv_f77_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat > conftest.$ac_ext <<_ACEOF
+ program main
+#ifndef __GNUC__
+ choke me
+#endif
+
+ end
+_ACEOF
+if ac_fn_f77_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_f77_compiler_gnu" >&5
+$as_echo "$ac_cv_f77_compiler_gnu" >&6; }
+ac_ext=$ac_save_ext
+ac_test_FFLAGS=${FFLAGS+set}
+ac_save_FFLAGS=$FFLAGS
+FFLAGS=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $F77 accepts -g" >&5
+$as_echo_n "checking whether $F77 accepts -g... " >&6; }
+if ${ac_cv_prog_f77_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ FFLAGS=-g
+cat > conftest.$ac_ext <<_ACEOF
+ program main
+
+ end
+_ACEOF
+if ac_fn_f77_try_compile "$LINENO"; then :
+ ac_cv_prog_f77_g=yes
+else
+ ac_cv_prog_f77_g=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_f77_g" >&5
+$as_echo "$ac_cv_prog_f77_g" >&6; }
+if test "$ac_test_FFLAGS" = set; then
+ FFLAGS=$ac_save_FFLAGS
+elif test $ac_cv_prog_f77_g = yes; then
+ if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+ FFLAGS="-g -O2"
+ else
+ FFLAGS="-g"
+ fi
+else
+ if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+ FFLAGS="-O2"
+ else
+ FFLAGS=
+ fi
+fi
+
+if test $ac_compiler_gnu = yes; then
+ G77=yes
+else
+ G77=
+fi
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fftw3d_f77_create_plan in -lsfftw" >&5
+$as_echo_n "checking for fftw3d_f77_create_plan in -lsfftw... " >&6; }
+if ${ac_cv_lib_sfftw_fftw3d_f77_create_plan+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsfftw $LIBS"
+cat > conftest.$ac_ext <<_ACEOF
+ program main
+ call fftw3d_f77_create_plan
+ end
+_ACEOF
+if ac_fn_f77_try_link "$LINENO"; then :
+ ac_cv_lib_sfftw_fftw3d_f77_create_plan=yes
+else
+ ac_cv_lib_sfftw_fftw3d_f77_create_plan=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_sfftw_fftw3d_f77_create_plan" >&5
+$as_echo "$ac_cv_lib_sfftw_fftw3d_f77_create_plan" >&6; }
+if test "x$ac_cv_lib_sfftw_fftw3d_f77_create_plan" = xyes; then :
+
+ FFTWPREC=s
+ PRECISION=DOUB
+
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fftw3d_f77_create_plan in -lfftw" >&5
+$as_echo_n "checking for fftw3d_f77_create_plan in -lfftw... " >&6; }
+if ${ac_cv_lib_fftw_fftw3d_f77_create_plan+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lfftw $LIBS"
+cat > conftest.$ac_ext <<_ACEOF
+ program main
+ call fftw3d_f77_create_plan
+ end
+_ACEOF
+if ac_fn_f77_try_link "$LINENO"; then :
+ ac_cv_lib_fftw_fftw3d_f77_create_plan=yes
+else
+ ac_cv_lib_fftw_fftw3d_f77_create_plan=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_fftw_fftw3d_f77_create_plan" >&5
+$as_echo "$ac_cv_lib_fftw_fftw3d_f77_create_plan" >&6; }
+if test "x$ac_cv_lib_fftw_fftw3d_f77_create_plan" = xyes; then :
+
+ FFTWPREC=
+ PRECISION=SING
+
+else
+
+ echo "Error! You need to have the (single precision) fftw library."
+ exit -1
+
+fi
+
+
+fi
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fftw3d_f77_create_plan in -ldfftw" >&5
+$as_echo_n "checking for fftw3d_f77_create_plan in -ldfftw... " >&6; }
+if ${ac_cv_lib_dfftw_fftw3d_f77_create_plan+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldfftw $LIBS"
+cat > conftest.$ac_ext <<_ACEOF
+ program main
+ call fftw3d_f77_create_plan
+ end
+_ACEOF
+if ac_fn_f77_try_link "$LINENO"; then :
+ ac_cv_lib_dfftw_fftw3d_f77_create_plan=yes
+else
+ ac_cv_lib_dfftw_fftw3d_f77_create_plan=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dfftw_fftw3d_f77_create_plan" >&5
+$as_echo "$ac_cv_lib_dfftw_fftw3d_f77_create_plan" >&6; }
+if test "x$ac_cv_lib_dfftw_fftw3d_f77_create_plan" = xyes; then :
+
+ FFTWPREC=d
+ PRECISION=DOUB
+
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fftw3d_f77_create_plan in -lfftw" >&5
+$as_echo_n "checking for fftw3d_f77_create_plan in -lfftw... " >&6; }
+if ${ac_cv_lib_fftw_fftw3d_f77_create_plan+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lfftw $LIBS"
+cat > conftest.$ac_ext <<_ACEOF
+ program main
+ call fftw3d_f77_create_plan
+ end
+_ACEOF
+if ac_fn_f77_try_link "$LINENO"; then :
+ ac_cv_lib_fftw_fftw3d_f77_create_plan=yes
+else
+ ac_cv_lib_fftw_fftw3d_f77_create_plan=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_fftw_fftw3d_f77_create_plan" >&5
+$as_echo "$ac_cv_lib_fftw_fftw3d_f77_create_plan" >&6; }
+if test "x$ac_cv_lib_fftw_fftw3d_f77_create_plan" = xyes; then :
+
+ FFTWPREC=
+ PRECISION=DOUB
+
+else
+
+ echo "Error! You need to have the (double precision) fftw library."
+ exit -1
+
+fi
+
+
+fi
+
+fi
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lgcc" >&5
+$as_echo_n "checking for main in -lgcc... " >&6; }
+if ${ac_cv_lib_gcc_main+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lgcc $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+
+int
+main ()
+{
+return main ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_gcc_main=yes
+else
+ ac_cv_lib_gcc_main=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gcc_main" >&5
+$as_echo "$ac_cv_lib_gcc_main" >&6; }
+if test "x$ac_cv_lib_gcc_main" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBGCC 1
+_ACEOF
+
+ LIBS="-lgcc $LIBS"
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Could not find libgcc" >&5
+$as_echo "$as_me: WARNING: Could not find libgcc" >&2;}
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for cblas_dgemv in -lgslcblas" >&5
+$as_echo_n "checking for cblas_dgemv in -lgslcblas... " >&6; }
+if ${ac_cv_lib_gslcblas_cblas_dgemv+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lgslcblas $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cblas_dgemv ();
+int
+main ()
+{
+return cblas_dgemv ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_gslcblas_cblas_dgemv=yes
+else
+ ac_cv_lib_gslcblas_cblas_dgemv=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gslcblas_cblas_dgemv" >&5
+$as_echo "$ac_cv_lib_gslcblas_cblas_dgemv" >&6; }
+if test "x$ac_cv_lib_gslcblas_cblas_dgemv" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBGSLCBLAS 1
+_ACEOF
+
+ LIBS="-lgslcblas $LIBS"
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gsl_spline_init in -lgsl" >&5
+$as_echo_n "checking for gsl_spline_init in -lgsl... " >&6; }
+if ${ac_cv_lib_gsl_gsl_spline_init+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lgsl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char gsl_spline_init ();
+int
+main ()
+{
+return gsl_spline_init ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_gsl_gsl_spline_init=yes
+else
+ ac_cv_lib_gsl_gsl_spline_init=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gsl_gsl_spline_init" >&5
+$as_echo "$ac_cv_lib_gsl_gsl_spline_init" >&6; }
+if test "x$ac_cv_lib_gsl_gsl_spline_init" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBGSL 1
+_ACEOF
+
+ LIBS="-lgsl $LIBS"
+
+else
+ as_fn_error $? "Could not find gsl. Hint (1) find /usr -name \"*gsl*\" -print Hint (2) install gsl*.a e.g. from http://www.gnu.org/software/gsl/ and put it in /usr/local/lib/ or set environment variable LDFLAGS to be -L/my/directory/lib/ with the library and CFLAGS to be -I/my/directory/include for the include files." "$LINENO" 5
+
+fi
+
+
+# needed for rfftw3d_mpi_create_plan_c_wrap.c
+
+
+
+
+
+ for ac_prog in mpicc hcc mpxlc_r mpxlc mpcc cmpicc
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MPICC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$MPICC"; then
+ ac_cv_prog_MPICC="$MPICC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_MPICC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+MPICC=$ac_cv_prog_MPICC
+if test -n "$MPICC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MPICC" >&5
+$as_echo "$MPICC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$MPICC" && break
+done
+test -n "$MPICC" || MPICC="$CC"
+
+ ax_mpi_save_CC="$CC"
+ CC="$MPICC"
+
+
+
+if test x = x"$MPILIBS"; then
+ ac_fn_c_check_func "$LINENO" "MPI_Init" "ac_cv_func_MPI_Init"
+if test "x$ac_cv_func_MPI_Init" = xyes; then :
+ MPILIBS=" "
+fi
+
+fi
+
+if test x = x"$MPILIBS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MPI_Init in -lmpi" >&5
+$as_echo_n "checking for MPI_Init in -lmpi... " >&6; }
+if ${ac_cv_lib_mpi_MPI_Init+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmpi $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char MPI_Init ();
+int
+main ()
+{
+return MPI_Init ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_mpi_MPI_Init=yes
+else
+ ac_cv_lib_mpi_MPI_Init=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mpi_MPI_Init" >&5
+$as_echo "$ac_cv_lib_mpi_MPI_Init" >&6; }
+if test "x$ac_cv_lib_mpi_MPI_Init" = xyes; then :
+ MPILIBS="-lmpi"
+fi
+
+fi
+if test x = x"$MPILIBS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MPI_Init in -lmpich" >&5
+$as_echo_n "checking for MPI_Init in -lmpich... " >&6; }
+if ${ac_cv_lib_mpich_MPI_Init+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmpich $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char MPI_Init ();
+int
+main ()
+{
+return MPI_Init ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_mpich_MPI_Init=yes
+else
+ ac_cv_lib_mpich_MPI_Init=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mpich_MPI_Init" >&5
+$as_echo "$ac_cv_lib_mpich_MPI_Init" >&6; }
+if test "x$ac_cv_lib_mpich_MPI_Init" = xyes; then :
+ MPILIBS="-lmpich"
+fi
+
+fi
+
+if test x != x"$MPILIBS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for mpi.h" >&5
+$as_echo_n "checking for mpi.h... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <mpi.h>
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ MPILIBS=""
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+CC="$ax_mpi_save_CC"
+
+
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test x = x"$MPILIBS"; then
+
+ :
+else
+
+$as_echo "#define HAVE_MPI 1" >>confdefs.h
+
+ :
+fi
+
+CC="$MPICC"
+
+
+ac_config_files="$ac_config_files Makefile src/Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by mpgrafic $as_me 0.3.10, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+mpgrafic config.status 0.3.10
+configured by $0, generated by GNU Autoconf 2.69,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = "\a"
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = "\a"
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
--- /dev/null
+AC_INIT([mpgrafic], [0.3.10])
+
+#AC_CONFIG_SRCDIR([src/mpgrafic.f90])
+AM_INIT_AUTOMAKE
+AM_CONFIG_HEADER(config.h)
+
+AC_LANG_FORTRAN77
+# MPI stuff
+AC_PROG_FC
+AC_ARG_VAR(MPIFC,[MPI Fortran compiler command])
+AC_CHECK_PROGS(MPIFC, mpifort mpif90 mpxlf95_r mpxlf90_r mpxlf95 mpxlf90 mpf90 cmpif90c, $FC)
+FC="$MPIFC"
+F77="$FC"
+AC_SUBST(MPIFC)
+
+AC_FC_LIBRARY_LDFLAGS
+
+
+# Precision
+AC_ARG_VAR(PRECISION,[Single or double precision calculations])
+AC_ARG_ENABLE([single],[AS_HELP_STRING([--enable-single],
+ [use single precision (default is double)])],
+ [use_single=yes],
+ [use_single=no])
+AC_ARG_VAR(FFTWPREC,[fftw precision prefix])
+
+if test x$use_single = xyes; then
+ AC_CHECK_LIB(sfftw,fftw3d_f77_create_plan,[
+ FFTWPREC=s
+ PRECISION=DOUB
+ ],[
+ AC_CHECK_LIB(fftw,fftw3d_f77_create_plan,[
+ FFTWPREC=
+ PRECISION=SING
+ ],[
+ echo "Error! You need to have the (single precision) fftw library."
+ exit -1
+ ])
+ ])
+else
+ AC_CHECK_LIB(dfftw,fftw3d_f77_create_plan,[
+ FFTWPREC=d
+ PRECISION=DOUB
+ ],[
+ AC_CHECK_LIB(fftw,fftw3d_f77_create_plan,[
+ FFTWPREC=
+ PRECISION=DOUB
+ ],[
+ echo "Error! You need to have the (double precision) fftw library."
+ exit -1
+ ])
+ ])
+fi
+AC_SUBST(FFTWPREC)
+AC_SUBST(PRECISION)
+
+AC_LANG_C
+AC_PROG_CC
+
+AC_CHECK_LIB(gcc,main,,
+ [AC_MSG_WARN(Could not find libgcc)
+ ])
+
+AC_CHECK_LIB(gslcblas,cblas_dgemv)
+AC_CHECK_LIB(gsl,gsl_spline_init,,
+ [AC_MSG_ERROR(Could not find gsl. Hint (1) find /usr -name "*gsl*" -print Hint (2) install gsl*.a e.g. from http://www.gnu.org/software/gsl/ and put it in /usr/local/lib/ or set environment variable LDFLAGS to be -L/my/directory/lib/ with the library and CFLAGS to be -I/my/directory/include for the include files.)
+ ])
+
+# needed for rfftw3d_mpi_create_plan_c_wrap.c
+AX_MPI
+CC="$MPICC"
+AC_SUBST(MPICC)
+
+AC_CONFIG_FILES([Makefile src/Makefile])
+AC_OUTPUT
--- /dev/null
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: mpgrafic
+Upstream-Contact: Boud Roukema (boud cosmo.torun.pl)
+Source: https://broukema@bitbucket.org/broukema/mpgrafic.git
+
+Files: *
+Copyright: 2008-2016, Simon Prunet (prunet iap.fr)
+ 2008-2016, Christophe Pichon
+ 2016, Boud Roukema
+License: GPL-v2+
+ This program is free software; you can redistribute it
+ and/or modify it under the terms of the GNU General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later
+ version.
+ .
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ PURPOSE. See the GNU General Public License for more
+ details.
+ .
+ You should have received a copy of the GNU General Public
+ License along with this package; if not, write to the Free
+ Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+ Boston, MA 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/GPL-2'.
+
+Files: debian/*
+Copyright: 2016, Boud Roukema (boud-debian cosmo.torun.pl)
+License: GPL-v2+
+ This program is free software; you can redistribute it
+ and/or modify it under the terms of the GNU General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later
+ version.
+ .
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ PURPOSE. See the GNU General Public License for more
+ details.
+ .
+ You should have received a copy of the GNU General Public
+ License along with this package; if not, write to the Free
+ Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+ Boston, MA 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/GPL-2'.
--- /dev/null
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2013-05-30.07; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by 'PROGRAMS ARGS'.
+ object Object file output by 'PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputting dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'. Note that this directory component will
+# be either empty or ending with a '/' character. This is deliberate.
+set_dir_from ()
+{
+ case $1 in
+ */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+ *) dir=;;
+ esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+ base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+ echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+ # If the compiler actually managed to produce a dependency file,
+ # post-process it.
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependency.h'.
+ # Do two passes, one to just change these to
+ # $object: dependency.h
+ # and one to simply output
+ # dependency.h:
+ # which is needed to avoid the deleted-header problem.
+ { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+ sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+ } > "$depfile"
+ rm -f "$tmpdepfile"
+ else
+ make_dummy_depfile
+ fi
+}
+
+# A tabulation character.
+tab=' '
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say). Also, it might not be
+## supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ # The second -e expression handles DOS-style file names with drive
+ # letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'. On the theory
+## that the space means something, we add a space to the output as
+## well. hp depmode also adds that space, but also prefixes the VPATH
+## to the object. Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like '#:fec' to the end of the
+ # dependency line.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+ | tr "$nl" ' ' >> "$depfile"
+ echo >> "$depfile"
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
+ else
+ make_dummy_depfile
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+xlc)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts '$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ set_dir_from "$object"
+ set_base_from "$object"
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
+ "$@" -Wc,-M
+ else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
+ "$@" -M
+ fi
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ aix_post_process_depfile
+ ;;
+
+tcc)
+ # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+ # FIXME: That version still under development at the moment of writing.
+ # Make that this statement remains true also for stable, released
+ # versions.
+ # It will wrap lines (doesn't matter whether long or short) with a
+ # trailing '\', as in:
+ #
+ # foo.o : \
+ # foo.c \
+ # foo.h \
+ #
+ # It will put a trailing '\' even on the last line, and will use leading
+ # spaces rather than leading tabs (at least since its commit 0394caf7
+ # "Emit spaces for -MD").
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+ # We have to change lines of the first kind to '$object: \'.
+ sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+ # And for each line of the second kind, we have to emit a 'dep.h:'
+ # dummy dependency, to avoid the deleted-header problem.
+ sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file. A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+ # Portland's C compiler understands '-MD'.
+ # Will always output deps to 'file.d' where file is the root name of the
+ # source file under compilation, even if file resides in a subdirectory.
+ # The object file name does not affect the name of the '.d' file.
+ # pgcc 10.2 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using '\' :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+ set_dir_from "$object"
+ # Use the source, not the object, to determine the base name, since
+ # that's sadly what pgcc will do too.
+ set_base_from "$source"
+ tmpdepfile=$base.d
+
+ # For projects that build the same source file twice into different object
+ # files, the pgcc approach of using the *source* file root name can cause
+ # problems in parallel builds. Use a locking strategy to avoid stomping on
+ # the same $tmpdepfile.
+ lockdir=$base.d-lock
+ trap "
+ echo '$0: caught signal, cleaning up...' >&2
+ rmdir '$lockdir'
+ exit 1
+ " 1 2 13 15
+ numtries=100
+ i=$numtries
+ while test $i -gt 0; do
+ # mkdir is a portable test-and-set.
+ if mkdir "$lockdir" 2>/dev/null; then
+ # This process acquired the lock.
+ "$@" -MD
+ stat=$?
+ # Release the lock.
+ rmdir "$lockdir"
+ break
+ else
+ # If the lock is being held by a different process, wait
+ # until the winning process is done or we timeout.
+ while test -d "$lockdir" && test $i -gt 0; do
+ sleep 1
+ i=`expr $i - 1`
+ done
+ fi
+ i=`expr $i - 1`
+ done
+ trap - 1 2 13 15
+ if test $i -le 0; then
+ echo "$0: failed to acquire lock after $numtries attempts" >&2
+ echo "$0: check lockdir '$lockdir'" >&2
+ exit 1
+ fi
+
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ set_dir_from "$object"
+ set_base_from "$object"
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add 'dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ make_dummy_depfile
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ set_dir_from "$object"
+ set_base_from "$object"
+
+ if test "$libtool" = yes; then
+ # Libtool generates 2 separate objects for the 2 libraries. These
+ # two compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir$base.o.d # libtool 1.5
+ tmpdepfile2=$dir.libs/$base.o.d # Likewise.
+ tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ # Same post-processing that is required for AIX mode.
+ aix_post_process_depfile
+ ;;
+
+msvc7)
+ if test "$libtool" = yes; then
+ showIncludes=-Wc,-showIncludes
+ else
+ showIncludes=-showIncludes
+ fi
+ "$@" $showIncludes > "$tmpdepfile"
+ stat=$?
+ grep -v '^Note: including file: ' "$tmpdepfile"
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ # The first sed program below extracts the file names and escapes
+ # backslashes for cygpath. The second sed program outputs the file
+ # name when reading, but also accumulates all include files in the
+ # hold buffer in order to output them again at the end. This only
+ # works with sed implementations that can handle large buffers.
+ sed < "$tmpdepfile" -n '
+/^Note: including file: *\(.*\)/ {
+ s//\1/
+ s/\\/\\\\/g
+ p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+ s/.*/'"$tab"'/
+ G
+ p
+}' >> "$depfile"
+ echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+ rm -f "$tmpdepfile"
+ ;;
+
+msvc7msys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for ':'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+ "$@" $dashmflag |
+ sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this sed invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no eat=no
+ for arg
+ do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ # makedepend may prepend the VPATH from the source file name to the object.
+ # No need to regex-escape $object, excess matching of '.' is harmless.
+ sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process the last invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed '1,2d' "$tmpdepfile" \
+ | tr ' ' "$nl" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E \
+ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ | sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+ echo "$tab" >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (C) 2008-2016 by Simon Prunet ;
+; prunet iap.fr ;
+; ;
+; This program is free software; you can redistribute it and/or modify ;
+; it under the terms of the GNU General Public License as published by ;
+; the Free Software Foundation; either version 2 of the License, or ;
+; (at your option) any later version. ;
+; ;
+; This program is distributed in the hope that it will be useful, ;
+; but WITHOUT ANY WARRANTY; without even the implied warranty of ;
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;
+; GNU General Public License for more details. ;
+; ;
+; You should have received a copy of the GNU General Public License ;
+; along with this program; if not, write to the ;
+; Free Software Foundation, Inc., ;
+; 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA ;
+; or see https://www.gnu.org/licenses/licenses.html#GPL . ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+pro powerspec, filename, k, pk
+
+read_grafic,filename,nn,cosmo,cube
+
+fcube = fft(cube,-1)
+fcube = double(fcube*conj(fcube))
+dx=cosmo(0)
+n=nn(0)
+dk=2.0*!pi/(n*dx)
+h0=cosmo(7)
+
+a=findgen(n/2)
+kvec=[findgen(n/2+1),-reverse(a(1:*))]*dk
+
+kx=fltarr(n,n,n)
+ky=kx
+kz=kx
+for i=0,n-1 do begin
+ for j=0,n-1 do begin
+ kx(*,i,j) = kvec
+ endfor
+endfor
+
+for i=0,n-1 do begin
+ for j=0,n-1 do begin
+ ky(i,*,j) = kvec
+ endfor
+endfor
+
+for i=0,n-1 do begin
+ for j=1,n-1 do begin
+ kz(i,j,*) = kvec
+ endfor
+endfor
+
+k = dblarr(n/2)
+pk = dblarr(n/2)
+modk = sqrt(kx^2+ky^2+kz^2)
+for i=0,n/2-1 do begin
+ ou = where(modk ge double(i)*dk and modk lt double(i+1)*dk)
+ pk(i) = total(fcube(ou),/double)/n_elements(ou)*(h0/100.)^3
+ k(i) = total(modk(ou),/double)/n_elements(ou)/(h0/100.)
+endfor
+
+end
--- /dev/null
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (C) 2008-2016 by Simon Prunet ;
+; prunet iap.fr ;
+; ;
+; This program is free software; you can redistribute it and/or modify ;
+; it under the terms of the GNU General Public License as published by ;
+; the Free Software Foundation; either version 2 of the License, or ;
+; (at your option) any later version. ;
+; ;
+; This program is distributed in the hope that it will be useful, ;
+; but WITHOUT ANY WARRANTY; without even the implied warranty of ;
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;
+; GNU General Public License for more details. ;
+; ;
+; You should have received a copy of the GNU General Public License ;
+; along with this program; if not, write to the ;
+; Free Software Foundation, Inc., ;
+; 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA ;
+; or see https://www.gnu.org/licenses/licenses.html#GPL . ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+pro read_grafic, filename, nn, cosmo, cube, kfile=kfile
+
+if (n_params() ne 4) then begin
+ print, 'Usage: read_grafic, filename, nn, cosmo, cube'
+ return
+endif
+
+openr,1,filename,/f77
+
+nn=lonarr(3)
+cosmo=fltarr(8)
+
+readu,1,nn,cosmo
+if (keyword_set(kfile)) then begin
+ n20 = 2*(nn(0)/2+1)
+ tempo = fltarr(n20,nn(1))
+ cube= fltarr(n20,nn(1),nn(2))
+endif else begin
+ tempo = fltarr(nn(0),nn(1))
+ cube = fltarr(nn(0),nn(1),nn(2))
+endelse
+
+for i=0,nn(2)-1 do begin
+
+ readu,1,tempo
+ cube(*,*,i) = tempo
+
+endfor
+close,1
+end
--- /dev/null
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (C) 2008-2016 by Simon Prunet ;
+; prunet iap.fr ;
+; ;
+; This program is free software; you can redistribute it and/or modify ;
+; it under the terms of the GNU General Public License as published by ;
+; the Free Software Foundation; either version 2 of the License, or ;
+; (at your option) any later version. ;
+; ;
+; This program is distributed in the hope that it will be useful, ;
+; but WITHOUT ANY WARRANTY; without even the implied warranty of ;
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;
+; GNU General Public License for more details. ;
+; ;
+; You should have received a copy of the GNU General Public License ;
+; along with this program; if not, write to the ;
+; Free Software Foundation, Inc., ;
+; 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA ;
+; or see https://www.gnu.org/licenses/licenses.html#GPL . ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+pro read_white,filename,head,cube
+
+openr,1,filename,/f77
+head=lonarr(4)
+readu,1,head
+nx=head(0)
+ny=head(1)
+nz=head(2)
+
+a=fltarr(nx,ny)
+cube=fltarr(nx,ny,nz)
+for i=0,nz-1 do begin
+ readu,1,a
+ cube(*,*,i)=a
+endfor
+
+close,1
+end
--- /dev/null
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (C) 2008-2016 by Simon Prunet ;
+; prunet iap.fr ;
+; ;
+; This program is free software; you can redistribute it and/or modify ;
+; it under the terms of the GNU General Public License as published by ;
+; the Free Software Foundation; either version 2 of the License, or ;
+; (at your option) any later version. ;
+; ;
+; This program is distributed in the hope that it will be useful, ;
+; but WITHOUT ANY WARRANTY; without even the implied warranty of ;
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;
+; GNU General Public License for more details. ;
+; ;
+; You should have received a copy of the GNU General Public License ;
+; along with this program; if not, write to the ;
+; Free Software Foundation, Inc., ;
+; 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA ;
+; or see https://www.gnu.org/licenses/licenses.html#GPL . ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+pro write_grafic, filename, nn, cosmo, cube
+
+openw,1,filename,/f77
+
+writeu,1,nn,cosmo
+tempo=fltarr(nn(0),nn(1))
+
+for i=0,nn(2)-1 do begin
+
+ tempo = cube(*,*,i)
+ writeu,1,tempo
+
+endfor
+close,1
+end
--- /dev/null
+gdl
\ No newline at end of file
--- /dev/null
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-11-20.07; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t) dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
+
+ -T) no_target_directory=true;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call 'install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ do_exit='(exit $ret); exit $ret'
+ trap "ret=129; $do_exit" 1
+ trap "ret=130; $do_exit" 2
+ trap "ret=141; $do_exit" 13
+ trap "ret=143; $do_exit" 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names problematic for 'test' and other utilities.
+ case $src in
+ -* | [=\(\)!]) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+ dst=$dst_arg
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ # $RANDOM is not portable (e.g. dash); use it when possible to
+ # lower collision chance
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ # As "mkdir -p" follows symlinks and we work in /tmp possibly; so
+ # create the $tmpdir first (and fail if unsuccessful) to make sure
+ # that nobody tries to guess the $tmpdir name.
+ if (umask $mkdir_umask &&
+ $mkdirprog $mkdir_mode "$tmpdir" &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ test_tmpdir="$tmpdir/a"
+ ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ eval "$initialize_posix_glob"
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob set -f
+ set fnord $dstdir
+ shift
+ $posix_glob set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test X"$d" = X && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
+
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2013-10-28.13; # UTC
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try '$0 --help' for more information"
+ exit 1
+fi
+
+case $1 in
+
+ --is-lightweight)
+ # Used by our autoconf macros to check whether the available missing
+ # script is modern enough.
+ exit 0
+ ;;
+
+ --run)
+ # Back-compat with the calling convention used by older automake.
+ shift
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+
+Supported PROGRAM values:
+ aclocal autoconf autoheader autom4te automake makeinfo
+ bison yacc flex lex help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: unknown '$1' option"
+ echo 1>&2 "Try '$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch. This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+ msg="probably too old"
+elif test $st -eq 127; then
+ # Program was missing.
+ msg="missing on your system"
+else
+ # Program was found and executed, but failed. Give up.
+ exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+ case $1 in
+ aclocal|automake)
+ echo "The '$1' program is part of the GNU Automake package:"
+ echo "<$gnu_software_URL/automake>"
+ echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/autoconf>"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ autoconf|autom4te|autoheader)
+ echo "The '$1' program is part of the GNU Autoconf package:"
+ echo "<$gnu_software_URL/autoconf/>"
+ echo "It also requires GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ esac
+}
+
+give_advice ()
+{
+ # Normalize program name to check for.
+ normalized_program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+ printf '%s\n' "'$1' is $msg."
+
+ configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+ case $normalized_program in
+ autoconf*)
+ echo "You should only need it if you modified 'configure.ac',"
+ echo "or m4 files included by it."
+ program_details 'autoconf'
+ ;;
+ autoheader*)
+ echo "You should only need it if you modified 'acconfig.h' or"
+ echo "$configure_deps."
+ program_details 'autoheader'
+ ;;
+ automake*)
+ echo "You should only need it if you modified 'Makefile.am' or"
+ echo "$configure_deps."
+ program_details 'automake'
+ ;;
+ aclocal*)
+ echo "You should only need it if you modified 'acinclude.m4' or"
+ echo "$configure_deps."
+ program_details 'aclocal'
+ ;;
+ autom4te*)
+ echo "You might have modified some maintainer files that require"
+ echo "the 'autom4te' program to be rebuilt."
+ program_details 'autom4te'
+ ;;
+ bison*|yacc*)
+ echo "You should only need it if you modified a '.y' file."
+ echo "You may want to install the GNU Bison package:"
+ echo "<$gnu_software_URL/bison/>"
+ ;;
+ lex*|flex*)
+ echo "You should only need it if you modified a '.l' file."
+ echo "You may want to install the Fast Lexical Analyzer package:"
+ echo "<$flex_URL>"
+ ;;
+ help2man*)
+ echo "You should only need it if you modified a dependency" \
+ "of a man page."
+ echo "You may want to install the GNU Help2man package:"
+ echo "<$gnu_software_URL/help2man/>"
+ ;;
+ makeinfo*)
+ echo "You should only need it if you modified a '.texi' file, or"
+ echo "any other file indirectly affecting the aspect of the manual."
+ echo "You might want to install the Texinfo package:"
+ echo "<$gnu_software_URL/texinfo/>"
+ echo "The spurious makeinfo call might also be the consequence of"
+ echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+ echo "want to install GNU make:"
+ echo "<$gnu_software_URL/make/>"
+ ;;
+ *)
+ echo "You might have modified some files without having the proper"
+ echo "tools for further handling them. Check the 'README' file, it"
+ echo "often tells you about the needed prerequisites for installing"
+ echo "this package. You may also peek at any GNU archive site, in"
+ echo "case some other package contains this missing '$1' program."
+ ;;
+ esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+ -e '2,$s/^/ /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+
+scriptversion=2009-04-28.21; # UTC
+
+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+IFS=" "" $nl"
+errstatus=0
+dirmode=
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake@gnu.org>."
+
+# process command line arguments
+while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage"
+ exit $?
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --version)
+ echo "$0 $scriptversion"
+ exit $?
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
+done
+
+for file
+do
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+done
+
+case $# in
+ 0) exit 0 ;;
+esac
+
+# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error. This is a problem when calling mkinstalldirs
+# from a parallel make. We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
+case $dirmode in
+ '')
+ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ else
+ # On NextStep and OpenStep, the 'mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because '.' already
+ # exists.
+ test -d ./-p && rmdir ./-p
+ test -d ./--version && rmdir ./--version
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+ test ! -d ./--version; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ else
+ # Clean up after NextStep and OpenStep mkdir.
+ for d in ./-m ./-p ./--version "./$dirmode";
+ do
+ test -d $d && rmdir $d
+ done
+ fi
+ ;;
+esac
+
+for file
+do
+ case $file in
+ /*) pathcomp=/ ;;
+ *) pathcomp= ;;
+ esac
+ oIFS=$IFS
+ IFS=/
+ set fnord $file
+ shift
+ IFS=$oIFS
+
+ for d
+ do
+ test "x$d" = x && continue
+
+ pathcomp=$pathcomp$d
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
+
+ pathcomp=$pathcomp/
+ done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+src/mpgrafic.1
\ No newline at end of file
--- /dev/null
+#!/bin/sh
+# regression-test-0.3.4.sh - check consistency of mpgrafic behaviour versus v0.3.4
+
+#/***************************************************************************
+# * Copyright (C) 2017 Boud Roukema *
+# * *
+# * This program is free software; you can redistribute it and/or modify *
+# * it under the terms of the GNU General Public License as published by *
+# * the Free Software Foundation; either version 2 of the License, or *
+# * (at your option) any later version. *
+# * *
+# * This program is distributed in the hope that it will be useful, *
+# * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+# * GNU General Public License for more details. *
+# * *
+# * You should have received a copy of the GNU General Public License *
+# * along with this program; if not, write to the *
+# * Free Software Foundation, Inc., *
+# * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA *
+# * or see https://www.gnu.org/licenses/licenses.html#GPL . *
+# **************************************************************************/
+
+
+printf "Code regression test: does the standard input file generate an\n"
+printf "output file identical to that produced by version 0.3.4\n"
+printf "of mpgrafic? IEEE_UNDERFLOW_FLAG and IEEE_DENORMAL exceptions\n"
+printf "are considered acceptable and ignored. Other minor warnings are\n"
+printf "ignored too on some systems/implementations.\n\n"
+
+## Run mpgrafic for a tiny number of particles with mpi - the aim is to test
+## algorithms and arithmetic, not computer power.
+
+EXPECTED_OUTPUT=${srcdir}/Output.stdout.np32
+TMP_OUT=Output.stdout.np32.tmp
+TMP_OUT_CLEANED=Output.stdout.np32.tmp.2
+
+## Running openmpi (on Debian) in a chroot jail with a minimal system
+## installed will fail if ssh (and rsh, which is not encrypted) are
+## absent from the system. Since ssh is not needed for testing on a
+## single processor, the default "rsh_agent" can be safely overridden
+## by the default shell "sh", but only if the mpirun (e.g. a symbolic link
+## to orterun) options follow a known syntax.
+##
+## If the system is Debian with mpi-default-dev installed, then
+## the check can be done as below.
+##
+## Adding a build dependency on ssh would be unreasonable, since, for
+## example, mpi jobs can be run on multi-processor single
+## machines. Moreover, it would add an extra burden in terms of
+## automatic checking of packages for security issues.
+##
+## Please add cases for other mpi implementations or GNU/Linux
+## distribution systems, or propose a more generic solution.
+##
+if [ -r /usr/share/mpi-default-dev/debian_defaults ] ; then
+ MPI_IMPL=$(grep ARCH_DEFAULT_MPI_IMPL \
+ /usr/share/mpi-default-dev/debian_defaults | \
+ sed -e 's/ARCH_DEFAULT_MPI_IMPL *= *//' | \
+ tail -n 1) # last evaluation overrides
+ if [ "x${MPI_IMPL}" = "xopenmpi" ]; then
+ printf "This looks like a debian openmpi system.\n"
+ mpirun -n 1 --mca plm_rsh_agent sh --mca orte_rsh_agent sh \
+ ${srcdir}/src/mpgrafic --np=32 < ${srcdir}/Input.stdin \
+ > ${TMP_OUT}
+ else
+ printf "This looks like a debian system, but \n"
+ printf "options for ${MPI_IMPL} have not yet been implemented,\n"
+ printf "so this test will pass without doing any work.\n"
+ exit 0
+ fi
+else
+ printf "MPI implementation unknown.\n"
+ mpirun -n 1 ${srcdir}/src/mpgrafic --np=32 < ${srcdir}/Input.stdin > ${TMP_OUT}
+fi
+
+## Ignore known warnings from non-openmpi implementations of mpi:
+cat ${TMP_OUT} | \
+ grep -v "Warning: Cannot receive number of cores .*Round robin.*startup scheme will be involved" > \
+ ${TMP_OUT_CLEANED}
+
+LINES_DIFF=$(diff ${EXPECTED_OUTPUT} ${TMP_OUT_CLEANED} | wc -l)
+
+if [ "x${LINES_DIFF}" = "x0" ] ; then
+ printf "A 32^3 mpi run of mpgrafic matched the expected output.\n"
+else
+ printf "Warning: A 32^3 mpi run of mpgrafic did not match the expected output.\n"
+ exit 1
+fi
+#rm -f ${TMP_OUT}
+
+exit 0
--- /dev/null
+#!/bin/sh
+# regression-test-0.3.7.8.sh - check consistency of mpgrafic behaviour versus v0.3.7.8
+
+#/***************************************************************************
+# * Copyright (C) 2017 Boud Roukema *
+# * *
+# * This program is free software; you can redistribute it and/or modify *
+# * it under the terms of the GNU General Public License as published by *
+# * the Free Software Foundation; either version 2 of the License, or *
+# * (at your option) any later version. *
+# * *
+# * This program is distributed in the hope that it will be useful, *
+# * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+# * GNU General Public License for more details. *
+# * *
+# * You should have received a copy of the GNU General Public License *
+# * along with this program; if not, write to the *
+# * Free Software Foundation, Inc., *
+# * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA *
+# * or see https://www.gnu.org/licenses/licenses.html#GPL . *
+# **************************************************************************/
+
+
+printf "Code regression test: does the standard input file generate an\n"
+printf "output file identical to that produced by version 0.3.7.8\n"
+printf "of mpgrafic? IEEE_UNDERFLOW_FLAG and IEEE_DENORMAL exceptions\n"
+printf "are considered acceptable and ignored. Other minor warnings are\n"
+printf "ignored too on some systems/implementations.\n\n"
+
+## Run mpgrafic for a tiny number of particles with mpi - the aim is to test
+## algorithms and arithmetic, not computer power.
+
+EXPECTED_OUTPUT=${srcdir}/Output.stdout.np32
+TMP_OUT=Output.stdout.np32.tmp
+TMP_OUT_CLEANED=Output.stdout.np32.tmp.2
+
+## Running openmpi (on Debian) in a chroot jail with a minimal system
+## installed will fail if ssh (and rsh, which is not encrypted) are
+## absent from the system. Since ssh is not needed for testing on a
+## single processor, the default "rsh_agent" can be safely overridden
+## by the default shell "sh", but only if the mpirun (e.g. a symbolic link
+## to orterun) options follow a known syntax.
+##
+## If the system is Debian with mpi-default-dev installed, then
+## the check can be done as below.
+##
+## Adding a build dependency on ssh would be unreasonable, since, for
+## example, mpi jobs can be run on multi-processor single
+## machines. Moreover, it would add an extra burden in terms of
+## automatic checking of packages for security issues.
+##
+## Please add cases for other mpi implementations or GNU/Linux
+## distribution systems, or propose a more generic solution.
+##
+if [ -r /usr/share/mpi-default-dev/debian_defaults ] ; then
+ MPI_IMPL=$(grep ARCH_DEFAULT_MPI_IMPL \
+ /usr/share/mpi-default-dev/debian_defaults | \
+ sed -e 's/ARCH_DEFAULT_MPI_IMPL *= *//' | \
+ tail -n 1) # last evaluation overrides
+ if [ "x${MPI_IMPL}" = "xopenmpi" ]; then
+ printf "This looks like a debian openmpi system.\n"
+ mpirun -n 1 --mca plm_rsh_agent sh \
+ ${srcdir}/src/mpgrafic --np=32 < ${srcdir}/Input.stdin \
+ > ${TMP_OUT}
+ else
+ printf "Warning: This looks like a debian system, but \n"
+ printf "options for ${MPI_IMPL} have not yet been implemented,\n"
+ printf "so this test will pass without doing any work.\n"
+ exit 0
+ fi
+else
+ printf "MPI implementation unknown.\n"
+ mpirun -n 1 ${srcdir}/src/mpgrafic --np=32 < ${srcdir}/Input.stdin > ${TMP_OUT}
+fi
+
+## Ignore known warnings from non-openmpi implementations of mpi:
+cat ${TMP_OUT} | \
+ grep -v "Warning: Cannot receive number of cores .*Round robin.*startup scheme will be involved" > \
+ ${TMP_OUT_CLEANED}
+
+LINES_DIFF=$(diff ${EXPECTED_OUTPUT} ${TMP_OUT_CLEANED} | wc -l)
+
+if [ "x${LINES_DIFF}" = "x0" ] ; then
+ printf "A 32^3 mpi run of mpgrafic matched the expected output.\n"
+else
+ printf "Warning: A 32^3 mpi run of mpgrafic did not match the expected output.\n"
+ exit 1
+fi
+#rm -f ${TMP_OUT}
+
+exit 0
--- /dev/null
+#!/bin/sh
+# regression-test-0.3.7.9.sh - check consistency of mpgrafic behaviour versus v0.3.7.9
+
+#/***************************************************************************
+# * Copyright (C) 2017 Boud Roukema *
+# * *
+# * This program is free software; you can redistribute it and/or modify *
+# * it under the terms of the GNU General Public License as published by *
+# * the Free Software Foundation; either version 2 of the License, or *
+# * (at your option) any later version. *
+# * *
+# * This program is distributed in the hope that it will be useful, *
+# * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+# * GNU General Public License for more details. *
+# * *
+# * You should have received a copy of the GNU General Public License *
+# * along with this program; if not, write to the *
+# * Free Software Foundation, Inc., *
+# * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA *
+# * or see https://www.gnu.org/licenses/licenses.html#GPL . *
+# **************************************************************************/
+
+
+printf "Code regression test: does the standard input file generate an\n"
+printf "output file identical to that produced by version 0.3.7.9\n"
+printf "of mpgrafic? IEEE_UNDERFLOW_FLAG and IEEE_DENORMAL exceptions\n"
+printf "are considered acceptable and ignored. Other minor warnings are\n"
+printf "ignored too on some systems/implementations.\n\n"
+
+## Run mpgrafic for a tiny number of particles with mpi - the aim is to test
+## algorithms and arithmetic, not computer power.
+
+EXPECTED_OUTPUT=${srcdir}/Output.stdout.np32
+TMP_OUT=Output.stdout.np32.tmp
+TMP_OUT_CLEANED=Output.stdout.np32.tmp.2
+
+## Running openmpi (on Debian) in a chroot jail with a minimal system
+## installed will fail if ssh (and rsh, which is not encrypted) are
+## absent from the system. Since ssh is not needed for testing on a
+## single processor, the default "rsh_agent" can be safely overridden
+## by the default shell "sh", but only if the mpirun (e.g. a symbolic link
+## to orterun) options follow a known syntax.
+##
+## If the system is Debian with mpi-default-dev installed, then
+## the check can be done as below.
+##
+## Adding a build dependency on ssh would be unreasonable, since, for
+## example, mpi jobs can be run on multi-processor single
+## machines. Moreover, it would add an extra burden in terms of
+## automatic checking of packages for security issues.
+##
+## Please add cases for other mpi implementations or GNU/Linux
+## distribution systems, or propose a more generic solution.
+##
+if [ -r /usr/share/mpi-default-dev/debian_defaults ] ; then
+ MPI_IMPL=$(grep ARCH_DEFAULT_MPI_IMPL \
+ /usr/share/mpi-default-dev/debian_defaults | \
+ sed -e 's/ARCH_DEFAULT_MPI_IMPL *= *//' | \
+ tail -n 1) # last evaluation overrides
+ if [ "x${MPI_IMPL}" = "xopenmpi" ]; then
+ printf "This looks like a debian openmpi system.\n"
+ mpirun -n 1 --mca plm_rsh_agent sh \
+ ${srcdir}/src/mpgrafic --np=32 < ${srcdir}/Input.stdin \
+ > ${TMP_OUT}
+ else
+ printf "Warning: This looks like a debian system, but \n"
+ printf "options for ${MPI_IMPL} have not yet been implemented,\n"
+ printf "so this test will pass without doing any work.\n"
+ exit 0
+ fi
+else
+ printf "MPI implementation unknown.\n"
+ mpirun -n 1 ${srcdir}/src/mpgrafic --np=32 < ${srcdir}/Input.stdin > ${TMP_OUT}
+fi
+
+## Ignore known warnings from non-openmpi implementations of mpi:
+cat ${TMP_OUT} | \
+ grep -v "Warning: Cannot receive number of cores .*Round robin.*startup scheme will be involved" > \
+ ${TMP_OUT_CLEANED}
+
+LINES_DIFF=$(diff ${EXPECTED_OUTPUT} ${TMP_OUT_CLEANED} | wc -l)
+
+if [ "x${LINES_DIFF}" = "x0" ] ; then
+ printf "A 32^3 mpi run of mpgrafic matched the expected output.\n"
+else
+ printf "Warning: A 32^3 mpi run of mpgrafic did not match the expected output.\n"
+ exit 1
+fi
+#rm -f ${TMP_OUT}
+
+exit 0
--- /dev/null
+#!/bin/sh
+# regression-test-0.3.7.sh - check consistency of mpgrafic behaviour versus v0.3.7
+
+#/***************************************************************************
+# * Copyright (C) 2017 Boud Roukema *
+# * *
+# * This program is free software; you can redistribute it and/or modify *
+# * it under the terms of the GNU General Public License as published by *
+# * the Free Software Foundation; either version 2 of the License, or *
+# * (at your option) any later version. *
+# * *
+# * This program is distributed in the hope that it will be useful, *
+# * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+# * GNU General Public License for more details. *
+# * *
+# * You should have received a copy of the GNU General Public License *
+# * along with this program; if not, write to the *
+# * Free Software Foundation, Inc., *
+# * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA *
+# * or see https://www.gnu.org/licenses/licenses.html#GPL . *
+# **************************************************************************/
+
+
+printf "Code regression test: does the standard input file generate an\n"
+printf "output file identical to that produced by version 0.3.7\n"
+printf "of mpgrafic? IEEE_UNDERFLOW_FLAG and IEEE_DENORMAL exceptions\n"
+printf "are considered acceptable and ignored. Other minor warnings are\n"
+printf "ignored too on some systems/implementations.\n\n"
+
+## Run mpgrafic for a tiny number of particles with mpi - the aim is to test
+## algorithms and arithmetic, not computer power.
+
+EXPECTED_OUTPUT=${srcdir}/Output.stdout.np32
+TMP_OUT=Output.stdout.np32.tmp
+TMP_OUT_CLEANED=Output.stdout.np32.tmp.2
+
+## Running openmpi (on Debian) in a chroot jail with a minimal system
+## installed will fail if ssh (and rsh, which is not encrypted) are
+## absent from the system. Since ssh is not needed for testing on a
+## single processor, the default "rsh_agent" can be safely overridden
+## by the default shell "sh", but only if the mpirun (e.g. a symbolic link
+## to orterun) options follow a known syntax.
+##
+## If the system is Debian with mpi-default-dev installed, then
+## the check can be done as below.
+##
+## Adding a build dependency on ssh would be unreasonable, since, for
+## example, mpi jobs can be run on multi-processor single
+## machines. Moreover, it would add an extra burden in terms of
+## automatic checking of packages for security issues.
+##
+## Please add cases for other mpi implementations or GNU/Linux
+## distribution systems, or propose a more generic solution.
+##
+if [ -r /usr/share/mpi-default-dev/debian_defaults ] ; then
+ MPI_IMPL=$(grep ARCH_DEFAULT_MPI_IMPL \
+ /usr/share/mpi-default-dev/debian_defaults | \
+ sed -e 's/ARCH_DEFAULT_MPI_IMPL *= *//' | \
+ tail -n 1) # last evaluation overrides
+ if [ "x${MPI_IMPL}" = "xopenmpi" ]; then
+ printf "This looks like a debian openmpi system.\n"
+ mpirun -n 1 --mca plm_rsh_agent sh \
+ ${srcdir}/src/mpgrafic --np=32 < ${srcdir}/Input.stdin \
+ > ${TMP_OUT}
+ else
+ printf "This looks like a debian system, but \n"
+ printf "options for ${MPI_IMPL} have not yet been implemented,\n"
+ printf "so this test will pass without doing any work.\n"
+ exit 0
+ fi
+else
+ printf "MPI implementation unknown.\n"
+ mpirun -n 1 ${srcdir}/src/mpgrafic --np=32 < ${srcdir}/Input.stdin > ${TMP_OUT}
+fi
+
+## Ignore known warnings from non-openmpi implementations of mpi:
+cat ${TMP_OUT} | \
+ grep -v "Warning: Cannot receive number of cores .*Round robin.*startup scheme will be involved" > \
+ ${TMP_OUT_CLEANED}
+
+LINES_DIFF=$(diff ${EXPECTED_OUTPUT} ${TMP_OUT_CLEANED} | wc -l)
+
+if [ "x${LINES_DIFF}" = "x0" ] ; then
+ printf "A 32^3 mpi run of mpgrafic matched the expected output.\n"
+else
+ printf "Warning: A 32^3 mpi run of mpgrafic did not match the expected output.\n"
+ exit 1
+fi
+#rm -f ${TMP_OUT}
+
+exit 0
--- /dev/null
+bin_PROGRAMS = mpgrafic
+
+# set the include path found by configure
+AM_CPPFLAGS= $(all_includes)
+
+# make sure that this is included in the distribution (make dist)
+EXTRA_DIST=grafic1.inc
+
+# the library search path.
+#
+## mpgrafic_LDFLAGS = -L
+## To add a local library directory such as
+## /usr/local/lib to the linking search path, do:
+##
+## LDFLAGS=-L/usr/local/lib ./configure
+##
+mpgrafic_SOURCES = grafic_types.f90 parallel_io.c grafic_io.f90 \
+ wrap_gsl_rng_mod.f90 c_gsl_wrap.c wrap_rfftw3d_mod.f90 \
+ rfftw3d_mpi_create_plan_c_wrap.c \
+ transform.f90 paste.f90 random.f90 util.f90 time.f90 \
+ mpnorm.f90 mpic4.f90 mppower.f90 \
+ mpgrafic.f90
+mpgrafic_LDADD = -l@FFTWPREC@rfftw_mpi -l@FFTWPREC@fftw_mpi \
+ -l@FFTWPREC@rfftw -l@FFTWPREC@fftw
+AM_FC = @MPIFC@
+AM_FCFLAGS = -cpp -D@PRECISION@
+
+dist_man_MANS = mpgrafic.1
+
+## Hack: If help2man is not installed, then the old version in the
+## distribution is a safe fallback.
+mpgrafic.1: mpgrafic.f90 ../config.h
+ help2man --output=$@ \
+ --name="MPI version of N-body initial conditions grafic package" \
+ --no-info ./mpgrafic || true
+
+clean:
+ rm -rf $(bin_PROGRAMS) *.o *.mod
--- /dev/null
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = mpgrafic$(EXEEXT)
+subdir = src
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/mkinstalldirs $(top_srcdir)/depcomp \
+ $(dist_man_MANS)
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_mpgrafic_OBJECTS = grafic_types.$(OBJEXT) parallel_io.$(OBJEXT) \
+ grafic_io.$(OBJEXT) wrap_gsl_rng_mod.$(OBJEXT) \
+ c_gsl_wrap.$(OBJEXT) wrap_rfftw3d_mod.$(OBJEXT) \
+ rfftw3d_mpi_create_plan_c_wrap.$(OBJEXT) transform.$(OBJEXT) \
+ paste.$(OBJEXT) random.$(OBJEXT) util.$(OBJEXT) time.$(OBJEXT) \
+ mpnorm.$(OBJEXT) mpic4.$(OBJEXT) mppower.$(OBJEXT) \
+ mpgrafic.$(OBJEXT)
+mpgrafic_OBJECTS = $(am_mpgrafic_OBJECTS)
+mpgrafic_DEPENDENCIES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
+FCCOMPILE = $(FC) $(AM_FCFLAGS) $(FCFLAGS)
+AM_V_FC = $(am__v_FC_@AM_V@)
+am__v_FC_ = $(am__v_FC_@AM_DEFAULT_V@)
+am__v_FC_0 = @echo " FC " $@;
+am__v_FC_1 =
+FCLD = $(FC)
+FCLINK = $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o \
+ $@
+AM_V_FCLD = $(am__v_FCLD_@AM_V@)
+am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@)
+am__v_FCLD_0 = @echo " FCLD " $@;
+am__v_FCLD_1 =
+SOURCES = $(mpgrafic_SOURCES)
+DIST_SOURCES = $(mpgrafic_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(dist_man_MANS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCLIBS = @FCLIBS@
+FFLAGS = @FFLAGS@
+FFTWPREC = @FFTWPREC@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MPICC = @MPICC@
+MPIFC = @MPIFC@
+MPILIBS = @MPILIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PRECISION = @PRECISION@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# set the include path found by configure
+AM_CPPFLAGS = $(all_includes)
+
+# make sure that this is included in the distribution (make dist)
+EXTRA_DIST = grafic1.inc
+
+# the library search path.
+#
+mpgrafic_SOURCES = grafic_types.f90 parallel_io.c grafic_io.f90 \
+ wrap_gsl_rng_mod.f90 c_gsl_wrap.c wrap_rfftw3d_mod.f90 \
+ rfftw3d_mpi_create_plan_c_wrap.c \
+ transform.f90 paste.f90 random.f90 util.f90 time.f90 \
+ mpnorm.f90 mpic4.f90 mppower.f90 \
+ mpgrafic.f90
+
+mpgrafic_LDADD = -l@FFTWPREC@rfftw_mpi -l@FFTWPREC@fftw_mpi \
+ -l@FFTWPREC@rfftw -l@FFTWPREC@fftw
+
+AM_FC = @MPIFC@
+AM_FCFLAGS = -cpp -D@PRECISION@
+dist_man_MANS = mpgrafic.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .f90 .o .obj
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu src/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p \
+ ; then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' \
+ -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' \
+ `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+mpgrafic$(EXEEXT): $(mpgrafic_OBJECTS) $(mpgrafic_DEPENDENCIES) $(EXTRA_mpgrafic_DEPENDENCIES)
+ @rm -f mpgrafic$(EXEEXT)
+ $(AM_V_FCLD)$(FCLINK) $(mpgrafic_OBJECTS) $(mpgrafic_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/c_gsl_wrap.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parallel_io.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfftw3d_mpi_create_plan_c_wrap.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.f90.o:
+ $(AM_V_FC)$(FCCOMPILE) -c -o $@ $<
+
+.f90.obj:
+ $(AM_V_FC)$(FCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+install-man1: $(dist_man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(dist_man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \
+ clean-binPROGRAMS clean-generic cscopelist-am ctags ctags-am \
+ distclean distclean-compile distclean-generic distclean-tags \
+ distdir dvi dvi-am html html-am info info-am install \
+ install-am install-binPROGRAMS install-data install-data-am \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-html install-html-am install-info install-info-am \
+ install-man install-man1 install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
+ ps ps-am tags tags-am uninstall uninstall-am \
+ uninstall-binPROGRAMS uninstall-man uninstall-man1
+
+
+mpgrafic.1: mpgrafic.f90 ../config.h
+ help2man --output=$@ \
+ --name="MPI version of N-body initial conditions grafic package" \
+ --no-info ./mpgrafic || true
+
+clean:
+ rm -rf $(bin_PROGRAMS) *.o *.mod
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+/*************************************************************************
+ * c_gsl_rng - C front ends for bits of GNU Scientific Library *
+ * *
+ * Copyright (C) 2016 by Boud Roukema *
+ * boud cosmo.torun.pl *
+ * *
+ * This program is free software; you can redistribute it and/or modify*
+ * it under the terms of the GNU General Public License as published by*
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA *
+ * or see https://www.gnu.org/licenses/licenses.html#GPL . *
+ *************************************************************************/
+
+#include <gsl/gsl_rng.h>
+#include <gsl/gsl_randist.h>
+#ifdef __GNUC__
+#include <stdio.h>
+#include <strings.h>
+#endif
+
+#define N_SIGMA_GAUSS 1.0
+
+/* Only turn on this check for small numbers; heavy I/O! */
+
+/*
+#define CHECK_STREAM_INDEPENDENCE 1
+*/
+
+
+void get_gsl_rng_seeds(int nproc,
+ long iseed,
+ long MaxRandNumStreams,
+ long *seeds /* 1D array [MaxRandNumStreams] */
+ );/* get_gsl_rng_ran_seeds */
+
+
+/* global random number generator - generate seeds, close generator */
+void get_gsl_rng_seeds(int nproc,
+ long iseed,
+ long MaxRandNumStreams,
+ long *seeds /* 1D array [MaxRandNumStreams] */
+ )/* get_gsl_rng_ran_seeds */
+{
+ const gsl_rng_type * T_gsl;
+ gsl_rng * r_gsl;
+
+ long i_seeds;
+
+ /* MT19937 - Makoto Matsumoto and Takuji Nishimura;
+ Mersenne prime period of 2^19937 - 1;
+ second revision 2002 - info gsl for details */
+ T_gsl = gsl_rng_mt19937;
+
+ /* RANLUX algorithm of L\"uscher;
+ period \sim 10^171;
+ second generation algorithm;
+ double-precision, highest luxury level;
+ slow: about 7-10 times slower than MT19937;
+ claims of well-tested randomness - info gsl for more
+ */
+ /* T_gsl = gsl_rng_ranlxd2; */
+
+ /* Fortran does not seem to include unsigned integers,
+ so we store iseed and seeds[...] as signed long integers,
+ but convert them back and forth when giving them to or
+ getting them from gsl_rng.
+ */
+
+ gsl_rng_default_seed = (unsigned long) iseed;
+ r_gsl = gsl_rng_alloc(T_gsl);
+
+ for(i_seeds=0; i_seeds < MaxRandNumStreams; i_seeds++){
+ seeds[i_seeds] = (long) gsl_rng_get(r_gsl);
+ };
+
+ gsl_rng_free(r_gsl);
+}
+
+void gauss_gsl(long Seed,
+ double *RandNum,
+ int free_gauss_gsl);
+
+
+/* Independent instances of this are created
+ by independent mpi threads. */
+void gauss_gsl(long Seed,
+ double *RandNum,
+ int free_gauss_gsl){
+
+ /* The static attribute should work for mpi (independent memory per
+ thread). If porting to openmp (shared memory) is needed, test this
+ before trusting it.
+ */
+ static int first_time = 1;
+ static const gsl_rng_type * T_gsl;
+ static gsl_rng * r_gsl = NULL;
+
+ static const double n_sigma_gauss = N_SIGMA_GAUSS;
+
+ if(free_gauss_gsl){
+ gsl_rng_free(r_gsl);
+ first_time = 0; /* in case this function gets called again after
+ freeing*/
+ }else{
+
+ if(first_time){
+ first_time = 0; /* no longer first time */
+ /* initialise the random number generator */
+
+ T_gsl = gsl_rng_ranlxd2;
+ /* A faster option could be:
+ T_gsl = gsl_rng_mt19937;
+ See the GSL documentation for more generators.
+ */
+ gsl_rng_default_seed = (unsigned long) Seed;
+ r_gsl = gsl_rng_alloc(T_gsl); /* uses gsl_rng_default_seed */
+ };
+
+ /* generate double-precision gaussian random value
+ https://en.wikipedia.org/wiki/Ziggurat_algorithm
+ */
+ *RandNum = gsl_ran_gaussian_ziggurat(r_gsl,
+ n_sigma_gauss);
+
+#ifdef CHECK_STREAM_INDEPENDENCE
+ fflush(stdout);
+ printf("Check: gauss_gsl: Seed= %ld, r_gsl= %p, *RandNum= %e\n",
+ Seed, r_gsl, *RandNum);
+ fflush(stdout);
+#endif
+
+ };
+}
--- /dev/null
+!c grafic1.inc
+!c User must set parameters then make grafic1
+!c
+!c Parameters for offsetting baryon and CDM velocity fields by
+!c 0.5 grid spacing.
+!c The origin of the baryon density field is (0,0,0). The origin
+!c of the baryon velocity field will be offvelb*(0.5,0.5,0.5)*dx
+!c and similarly for offvelc. offvelb/c should be +/-1 or 0.
+ integer offvelb,offvelc
+ parameter (offvelb=0,offvelc=+1)
+!c
+!c Initial density fluctuation amplitude on the ultimate subgrid scale.
+!c For large grids (> 10^7) one may wish to decrease this; for small
+!c refinement grids (< 10^6) and multiple levels one may wish to increase it.
+ real sigstart
+ parameter (sigstart=0.2)
+!c
+!c Top grid mesh size.
+!c
+! integer np1,np2,np3
+
+!2016-12-27 shifted to optional command line argument in mpgrafic.f90 --boud
+!#ifdef MPGRAFIC_NP
+! parameter (np1=MPGRAFIC_NP,np2=MPGRAFIC_NP,np3=MPGRAFIC_NP)
+!#else
+!c parameter (np1=128,np2=128,np3=128)
+! parameter (np1=256,np2=256,np3=256)
+!c parameter (np1=512,np2=512,np3=512)
+!#endif
+
+!c
+!c np[1-3]: particle lattice size for computing initial conditions.
+!c All must be divisible by 2. They need not be equal.
+!c The memory required by grafic1 is np1*np2*np3 words plus a few.
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al !
+! prunet iap.fr !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+#include "../config.h"
+
+module grafic_io
+
+ use grafic_types
+ implicit none
+! integer, parameter :: nblock = 10
+ integer, parameter :: RECORD_FLAG=4 !bytes
+
+ type taille
+ integer :: nx
+ integer :: ny
+ integer :: nz
+ real(kind=sp) :: dx
+ real(kind=sp) :: lx
+ real(kind=sp) :: ly
+ real(kind=sp) :: lz
+ end type taille
+
+ type cosmo
+ real(kind=sp) :: astart
+ real(kind=sp) :: omegam
+ real(kind=sp) :: omegav
+ real(kind=sp) :: h0
+ end type cosmo
+
+ interface grafic_write
+ module procedure grafic_write_single, grafic_write_double
+ end interface
+
+ interface grafic_read
+ module procedure grafic_read_single, grafic_read_double
+ end interface
+
+ interface
+ subroutine f77_parallel_read &
+ (filename, fnamelen, size, offset, buffer_address)
+ use iso_C_binding
+ implicit none
+ character(len=128) :: filename
+ integer(c_int32_t) :: fnamelen
+ integer(c_int64_t) :: size
+ integer(c_int64_t) :: offset
+ type(c_ptr), value :: buffer_address
+ end subroutine f77_parallel_read
+ end interface
+
+ interface
+ subroutine f77_parallel_write &
+ (filename, fnamelen, size, offset, buffer_address)
+ use iso_C_binding
+ implicit none
+ character(len=128) :: filename
+ integer(c_int32_t) :: fnamelen
+ integer(c_int64_t) :: size
+ integer(c_int64_t) :: offset
+ type(c_ptr), value :: buffer_address
+ end subroutine f77_parallel_write
+ end interface
+
+contains
+
+
+ ! This routine write a fftw_mpi slice of a cube
+ ! This slice has interior dimension nx, exterior nz.
+ ! Beware that interior dimension is padded: nx <- 2(nx/2+1)
+ ! Padded region will not be written.
+ subroutine grafic_write_double(buffer,local_nz,local_z_start,ny,nx,filename,padding_in, white_in)
+
+ use iso_C_binding
+
+ ! Arguments
+ implicit none
+ include 'mpif.h'
+ real(dp), dimension(:), intent(in) :: buffer
+ integer, intent(in) :: local_nz, local_z_start, ny, nx
+ character(len=128), intent(in) :: filename
+ !integer, intent(in) :: filenamelen
+ logical, optional :: padding_in
+ logical, optional :: white_in
+
+ ! Local variables
+ !real(sp), allocatable, dimension(:) :: tampon
+ !integer :: record_size
+ !integer(RECORD_FLAG) :: taille_tampon ! kind values are implementation dependent!
+
+ real(c_float), allocatable, dimension(:), target :: tampon
+ integer(c_int32_t), target :: taille_tampon
+
+ integer :: n2x
+ integer(i8b) :: index, index2, offset, length !, toto
+ !integer :: idummy=0
+ integer :: i,j,k !,myid,ierr
+ logical :: padding, white
+
+ padding=.false.
+ white=.false.
+ if (present(padding_in)) padding = padding_in
+ !if (present(padding_in)) write(*,*) 'padding is on'
+ if (present(white_in)) white = white_in
+ ! 2*4 for leading and trailing record sizes
+ n2x = 2*(nx/2+1)
+ if (padding) then
+ !write(*,*) 'padding is true in grafic_write'
+ allocate(tampon(ny*n2x))
+ taille_tampon = ny*n2x*sp_bytes ! in bytes
+ else
+ allocate(tampon(ny*nx))
+ taille_tampon = ny*nx*sp_bytes ! in bytes
+ endif
+
+ if (white) then
+ offset = 4*4 + 2*RECORD_FLAG
+ else
+ offset = 3*4+8*sp_bytes + 2*RECORD_FLAG ! First record
+ endif
+
+ if (padding) then
+ offset = offset + local_z_start*int(ny*n2x*sp_bytes + 2*RECORD_FLAG, i8b)
+ else
+ offset = offset + local_z_start*int(ny*nx*sp_bytes + 2*RECORD_FLAG, i8b)
+ endif
+
+ do k=1,local_nz
+
+ index2=1
+ ! This loop to (eventually) get rid of fftw padding zone
+ if (padding) then
+ do j=1,ny
+ do i=1,n2x
+ index = ((k-1)*ny+j-1)*n2x+i
+ tampon(index2) = real(buffer(index),kind=sp)
+ index2 = index2 + 1
+ enddo
+ enddo
+ else
+ do j=1,ny
+ do i=1,nx
+ index = ((k-1)*ny+j-1)*n2x+i
+ tampon(index2) = real(buffer(index),kind=sp)
+ index2 = index2 + 1
+ enddo
+ enddo
+ endif
+ ! First write f... Fortran record length
+ length=RECORD_FLAG
+ call f77_parallel_write(trim(filename),len_trim(filename, i4b), length &
+ & ,offset,c_loc(taille_tampon))
+ offset = offset+RECORD_FLAG
+ if (padding) then
+ length = ny*n2x*sp_bytes
+ else
+ length = ny*nx*sp_bytes
+ endif
+ call f77_parallel_write(trim(filename),len_trim(filename, i4b), length, &
+ & offset, c_loc(tampon))
+ offset = offset+length
+ ! Again ..
+ length=RECORD_FLAG
+ call f77_parallel_write(trim(filename),len_trim(filename, i4b), length &
+ & ,offset,c_loc(taille_tampon))
+ offset = offset+RECORD_FLAG
+
+ enddo
+ deallocate(tampon)
+
+ end subroutine grafic_write_double
+
+ subroutine grafic_write_single(buffer,local_nz,local_z_start,ny,nx,filename,padding_in, white_in)
+ use iso_C_binding
+
+ ! Arguments
+ implicit none
+ include 'mpif.h'
+ real(sp), dimension(:), intent(in) :: buffer
+ integer, intent(in) :: local_nz, local_z_start, ny, nx
+ character(len=128), intent(in) :: filename
+ !integer, intent(in) :: filenamelen
+ logical, optional :: padding_in
+ logical, optional :: white_in
+
+
+ ! Local variables
+ !real(sp), allocatable, dimension(:) :: tampon
+ !integer :: record_size
+ !integer(RECORD_FLAG) :: taille_tampon
+
+ real(c_float), allocatable, dimension(:), target :: tampon
+ integer(c_int32_t), target :: taille_tampon
+
+ integer :: n2x
+ integer(i8b) :: index, index2, offset, length !, toto
+ !integer :: idummy=0
+ integer :: i,j,k !,myid,ierr
+ logical :: padding, white
+
+
+ padding=.false.
+ white=.false.
+ if (present(padding_in)) padding = padding_in
+ !if (present(padding_in)) write(*,*) 'padding is on'
+ if (present(white_in)) white = white_in
+ ! 2*4 for leading and trailing record sizes
+ n2x = 2*(nx/2+1)
+ if (padding) then
+ !write(*,*) 'padding is true in grafic_write'
+ allocate(tampon(ny*n2x))
+ taille_tampon = ny*n2x*sp_bytes ! in bytes
+ else
+ allocate(tampon(ny*nx))
+ taille_tampon = ny*nx*sp_bytes ! in bytes
+ endif
+
+ if (white) then
+ offset = 4*4 + 2*RECORD_FLAG
+ else
+ offset = 3*4+8*sp_bytes + 2*RECORD_FLAG ! First record
+ endif
+
+ if (padding) then
+ offset = offset + local_z_start*int(ny*n2x*sp_bytes + 2*RECORD_FLAG, i8b)
+ else
+ offset = offset + local_z_start*int(ny*nx*sp_bytes + 2*RECORD_FLAG, i8b)
+ endif
+
+ do k=1,local_nz
+
+ index2=1
+ ! This loop to (eventually) get rid of fftw padding zone
+ if (padding) then
+ do j=1,ny
+ do i=1,n2x
+ index = ((k-1)*ny+j-1)*n2x+i
+ tampon(index2) = real(buffer(index),kind=sp)
+ index2 = index2 + 1
+ enddo
+ enddo
+ else
+ do j=1,ny
+ do i=1,nx
+ index = ((k-1)*ny+j-1)*n2x+i
+ tampon(index2) = real(buffer(index),kind=sp)
+ index2 = index2 + 1
+ enddo
+ enddo
+ endif
+ ! First write f... Fortran record length
+ length=RECORD_FLAG
+ call f77_parallel_write(trim(filename),len_trim(filename, i4b), length &
+ & ,offset,c_loc(taille_tampon))
+ offset = offset+RECORD_FLAG
+ if (padding) then
+ length = ny*n2x*sp_bytes
+ else
+ length = ny*nx*sp_bytes
+ endif
+ call f77_parallel_write(trim(filename),len_trim(filename, i4b), length, &
+ & offset, c_loc(tampon))
+ offset = offset+length
+ ! Again ..
+ length=RECORD_FLAG
+ call f77_parallel_write(trim(filename),len_trim(filename, i4b), length &
+ & ,offset,c_loc(taille_tampon))
+ offset = offset+RECORD_FLAG
+
+ enddo
+ deallocate(tampon)
+
+ end subroutine grafic_write_single
+
+ subroutine grafic_read_double(buffer,local_nz,local_z_start,ny,nx,filename, padding_in, white_in)
+
+ use iso_C_binding
+
+ ! Arguments
+ implicit none
+ include 'mpif.h'
+ integer, intent(in) :: local_nz, local_z_start, ny, nx
+ real(dp), dimension(local_nz*ny*2*(nx/2+1)), intent(out) :: buffer
+ character(len=128), intent(in) :: filename
+ logical, optional :: padding_in ! Read padded zone or not
+ logical, optional :: white_in ! Different header for white noise file
+ ! Local variables
+ !real(sp), allocatable, dimension(:) :: tampon
+ !integer :: record_size
+ !integer(RECORD_FLAG) :: taille_tampon ! kind values are implementation dependent!
+
+ real(c_float), allocatable, dimension(:), target :: tampon
+ integer(c_int32_t), target :: taille_tampon
+
+ integer :: n2x
+ integer(i8b) :: index, index2, offset, length
+ !integer :: idummy=0
+ integer :: i,j,k
+ !integer :: myid,ierr
+ logical :: padding
+ logical :: white
+
+
+ padding = .false.
+ white = .false.
+ if (present(padding_in)) padding = padding_in
+ if (present(white_in)) white = white_in
+ ! 2*4 for leading and trailing record sizes
+ n2x = 2*(nx/2+1)
+ if (padding) then
+ allocate(tampon(ny*n2x))
+ else
+ allocate(tampon(ny*nx))
+ endif
+ taille_tampon = 0
+
+ if (white) then
+ offset = 4*4 + 2*RECORD_FLAG
+ else
+ offset = 3*4+8*sp_bytes + 2*RECORD_FLAG ! First record
+ endif
+ if (padding) then
+ offset = offset + local_z_start*int(ny*n2x*sp_bytes + 2*RECORD_FLAG, i8b)
+ else
+ offset = offset + local_z_start*int(ny*nx*sp_bytes+2*RECORD_FLAG, i8b)
+ endif
+
+ do k=1,local_nz
+
+ length = RECORD_FLAG
+ ! First read f... Fortran record length
+ call f77_parallel_read(trim(filename),len_trim(filename, i4b), length &
+ & ,offset,c_loc(taille_tampon))
+ if (padding) then
+ if (taille_tampon /= ny*n2x*sp_bytes) then
+ print*,'Record size ',taille_tampon,' is different from expected', &
+ & ny*n2x*sp_bytes
+ stop
+ endif
+ else
+ if (taille_tampon /= ny*nx*sp_bytes) then
+ print*,'Record size ',taille_tampon,' is different from expected', &
+ & ny*nx*sp_bytes
+ stop
+ endif
+ endif
+ offset = offset+RECORD_FLAG
+
+ if (padding) then
+ length = ny*n2x*sp_bytes
+ else
+ length = ny*nx*sp_bytes
+ endif
+ call f77_parallel_read(trim(filename),len_trim(filename, i4b), length, &
+ & offset, c_loc(tampon))
+ offset = offset+length
+ ! Again ..
+ length=RECORD_FLAG
+ call f77_parallel_read(trim(filename),len_trim(filename, i4b), length &
+ & ,offset,c_loc(taille_tampon))
+ offset = offset+RECORD_FLAG
+
+ ! This loop to (eventually) get rid of fftw padding zone
+ index2=1
+ if (padding) then
+ do j=1,ny
+ do i=1,n2x ! Read padding (Nyquist) : reading in k space ...
+ index=((k-1)*ny+j-1)*n2x+i
+ buffer(index) = real(tampon(index2),kind=dp)
+ index2 = index2 + 1
+ enddo
+ enddo
+ else
+ do j=1,ny
+ do i=1,nx ! Do not read padding : reading in real space ...
+ index = ((k-1)*ny+j-1)*n2x+i
+ buffer(index) = real(tampon(index2),kind=dp)
+ index2 = index2 + 1
+ enddo
+ enddo
+ endif
+
+ enddo
+ deallocate(tampon)
+
+ end subroutine grafic_read_double
+
+ subroutine grafic_read_single(buffer,local_nz,local_z_start,ny,nx,filename, padding_in, white_in)
+ use iso_C_binding
+
+ ! Arguments
+ implicit none
+ include 'mpif.h'
+ integer, intent(in) :: local_nz, local_z_start, ny, nx
+ real(sp), dimension(local_nz*ny*2*(nx/2+1)), intent(out) :: buffer
+ character(len=128), intent(in) :: filename
+ logical, optional :: padding_in ! Read padded zone or not
+ logical, optional :: white_in ! Different header for white noise file
+ ! Local variables
+ !real(sp), allocatable, dimension(:) :: tampon
+ !integer :: record_size
+ !integer(RECORD_FLAG) :: taille_tampon
+
+ real(c_float), allocatable, dimension(:), target :: tampon
+ integer(c_int32_t), target :: taille_tampon
+
+ integer :: n2x
+ integer(i8b) :: index, index2, offset, length
+ !integer :: idummy=0
+ integer :: i,j,k
+ !integer :: myid,ierr
+ logical :: padding
+ logical :: white
+
+
+ padding = .false.
+ white = .false.
+ if (present(padding_in)) padding = padding_in
+ if (present(white_in)) white = white_in
+ ! 2*4 for leading and trailing record sizes
+ n2x = 2*(nx/2+1)
+ if (padding) then
+ allocate(tampon(ny*n2x))
+ else
+ allocate(tampon(ny*nx))
+ endif
+ taille_tampon = 0
+
+ if (white) then
+ offset = 4*4 + 2*RECORD_FLAG
+ else
+ offset = 3*4+8*sp_bytes + 2*RECORD_FLAG ! First record
+ endif
+ if (padding) then
+ offset = offset + local_z_start*int(ny*n2x*sp_bytes + 2*RECORD_FLAG, i8b)
+ else
+ offset = offset + local_z_start*int(ny*nx*sp_bytes+2*RECORD_FLAG, i8b)
+ endif
+
+ do k=1,local_nz
+
+ length = RECORD_FLAG
+ ! First read f... Fortran record length
+ call f77_parallel_read(trim(filename),len_trim(filename, i4b), length &
+ & ,offset,c_loc(taille_tampon))
+ if (padding) then
+ if (taille_tampon /= ny*n2x*sp_bytes) then
+ print*,'Record size ',taille_tampon,' is different from expected', &
+ & ny*n2x*sp_bytes
+ stop
+ endif
+ else
+ if (taille_tampon /= ny*nx*sp_bytes) then
+ print*,'Record size ',taille_tampon,' is different from expected', &
+ & ny*nx*sp_bytes
+ stop
+ endif
+ endif
+ offset = offset+RECORD_FLAG
+
+ if (padding) then
+ length = ny*n2x*sp_bytes
+ else
+ length = ny*nx*sp_bytes
+ endif
+ call f77_parallel_read(trim(filename),len_trim(filename, i4b), length, &
+ & offset, c_loc(tampon))
+ offset = offset+length
+ ! Again ..
+ length=RECORD_FLAG
+ call f77_parallel_read(trim(filename),len_trim(filename, i4b), length &
+ & ,offset,c_loc(taille_tampon))
+ offset = offset+RECORD_FLAG
+
+ ! This loop to (eventually) get rid of fftw padding zone
+ index2=1
+ if (padding) then
+ do j=1,ny
+ do i=1,n2x ! Read padding (Nyquist) : reading in k space ...
+ index=((k-1)*ny+j-1)*n2x+i
+ buffer(index) = real(tampon(index2),kind=sp)
+ index2 = index2 + 1
+ enddo
+ enddo
+ else
+ do j=1,ny
+ do i=1,nx ! Do not read padding : reading in real space ...
+ index = ((k-1)*ny+j-1)*n2x+i
+ buffer(index) = real(tampon(index2),kind=sp)
+ index2 = index2 + 1
+ enddo
+ enddo
+ endif
+
+ enddo
+ deallocate(tampon)
+
+ end subroutine grafic_read_single
+
+
+
+
+ subroutine grafic_read_header(filename,head_taille,head_cosmo)
+
+ type(taille), intent(out) :: head_taille
+ type(cosmo), intent(out) :: head_cosmo
+ character(len=128), intent(in) :: filename
+ logical :: ok
+
+ inquire(file=filename,exist=ok)
+ if (.not. ok) then
+ print*,'File ',trim(filename),' does not exist, aborting.'
+ stop
+ endif
+
+ open(2,file=filename,form='unformatted',status='old')
+ read(2) head_taille%nx, head_taille%ny, head_taille%nz, head_taille%dx, &
+ head_taille%lx, head_taille%ly, head_taille%lz, head_cosmo%astart, &
+ head_cosmo%omegam, head_cosmo%omegav, head_cosmo%h0
+ close(2)
+
+ end subroutine grafic_read_header
+
+ subroutine grafic_read_header_white(filename,nx,ny,nz,iseed)
+
+ use iso_C_binding
+ integer, intent(out) :: nx,ny,nz
+#ifdef HAVE_LIBGSL
+ integer(c_long), intent(out) :: iseed
+#else
+ integer, intent(out) :: iseed
+#endif
+
+ character(len=128), intent(in) :: filename
+ logical :: ok
+
+ inquire(file=filename,exist=ok)
+ if (.not. ok) then
+ print*,'File ',trim(filename),' does not exist, aborting.'
+ stop
+ endif
+
+ open(2,file=filename,form='unformatted',status='old')
+ read(2) nx, ny, nz, iseed
+ close(2)
+
+ end subroutine grafic_read_header_white
+
+ subroutine grafic_write_header(filename,head_taille,head_cosmo)
+
+ type(taille), intent(in) :: head_taille
+ type(cosmo), intent(in) :: head_cosmo
+ character(len=128), intent(in) :: filename
+
+ open(2,file=filename,form='unformatted',status='unknown')
+ write(2) head_taille%nx, head_taille%ny, head_taille%nz, head_taille%dx, &
+ head_taille%lx, head_taille%ly, head_taille%lz, head_cosmo%astart, &
+ head_cosmo%omegam, head_cosmo%omegav, head_cosmo%h0
+ close(2)
+
+ end subroutine grafic_write_header
+
+ subroutine grafic_write_header_white(filename,nx,ny,nz,iseed)
+
+ use iso_C_binding
+ integer, intent(in) :: nx,ny,nz
+#ifdef HAVE_LIBGSL
+ integer(c_long), intent(in) :: iseed
+#else
+ integer, intent(in) :: iseed
+#endif
+ character(len=128), intent(in) :: filename
+
+ open(2,file=filename,form='unformatted',status='unknown')
+ write(2) nx, ny, nz, iseed
+ close(2)
+
+ end subroutine grafic_write_header_white
+
+
+end module grafic_io
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al !
+! prunet iap.fr !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+module grafic_types
+
+ integer, parameter :: dp=selected_real_kind(12,200)
+ integer, parameter :: sp=selected_real_kind(5,30)
+ ! TODO: portability - "kind parameters are implementation dependent" -
+ ! https://gcc.gnu.org/onlinedocs/gcc-6.3.0/gfortran/Old-style-kind-specifications.html
+ ! possible solution - https://gcc.gnu.org/onlinedocs/gcc-6.3.0/gfortran/C_005fSIZEOF.html
+ integer, parameter :: sp_bytes = 4
+
+ integer, parameter :: i4b=selected_int_kind(9)
+ integer, parameter :: i8b=selected_int_kind(18) !log(2*10^18)/log(2)=60.8
+ integer, parameter :: dpc=kind((1.0_dp,1.0_dp))
+
+ REAL(kind=dp), PARAMETER, public :: PI=3.141592653589793238462643383279502884197_dp
+
+ ! FFTW stuff
+ INTEGER,PARAMETER:: FFTW_FORWARD=-1, FFTW_BACKWARD=1
+
+ INTEGER,PARAMETER:: FFTW_REAL_TO_COMPLEX=-1, FFTW_COMPLEX_TO_REAL=1
+
+ INTEGER,PARAMETER:: FFTW_ESTIMATE=0, FFTW_MEASURE=1
+
+ INTEGER,PARAMETER:: FFTW_OUT_OF_PLACE=0, FFTW_IN_PLACE=8
+
+ INTEGER,PARAMETER:: FFTW_USE_WISDOM=16
+
+ INTEGER,PARAMETER:: FFTW_THREADSAFE=128
+
+ integer,parameter:: FFTW_TRANSPOSED_ORDER=1, FFTW_NORMAL_ORDER=0
+ integer,parameter:: FFTW_SCRAMBLED_INPUT=8192
+ integer,parameter:: FFTW_SCRAMBLED_OUTPUT=16384
+
+#ifdef ADD1US
+#define rfftw3d_f77_create_plan rfftw3d_f77_create_plan_
+#define rfftwnd_f77_destroy_plan rfftwnd_f77_destroy_plan_
+#define rfftwnd_f77_one_real_to_complex rfftwnd_f77_one_real_to_complex_
+#define rfftw3d_f77_mpi_create_plan rfftw3d_f77_mpi_create_plan_
+#define rfftwnd_f77_mpi_destroy_plan rfftwnd_f77_mpi_destroy_plan_
+#define rfftwnd_f77_mpi rfftwnd_f77_mpi_
+#define rfftwnd_f77_mpi_local_sizes rfftwnd_f77_mpi_local_sizes_
+#endif
+
+ INCLUDE 'mpif.h'
+
+
+end module grafic_types
--- /dev/null
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.46.4.
+.TH MPGRAFIC "1" "January 2017" "mpgrafic 0.3.10" "User Commands"
+.SH NAME
+mpgrafic \- MPI version of N-body initial conditions grafic package
+.SH SYNOPSIS
+.B mpgrafic
+[\fI\,OPTION\/\fR...] [\fI\,< INPUT_FILE\/\fR] [\fI\,> OUTPUT_FILE\/\fR]
+.SH DESCRIPTION
+mpgrafic produces initial conditions files for N\-body simulations of
+cosmological large\-scale structure formation. It is a free\-licensed,
+MPI\-parallelised, rewritten version of Ed Bertschinger's grafic\-1
+program, producing output files in the grafic format. It includes
+options for an Eisenstein and Hu baryonic wiggles power spectrum, for
+using a low\-resolution map for large\-scale modes in the spirit of
+grafic\-2, and together with constrfield, can be used for generating
+constrained initial conditions. Details are given in Prunet et al
+(2008) http://cdsads.u\-strasbg.fr/abs/2008ApJS..178..179P.
+.PP
+Most recent source code:
+git clone https://broukema@bitbucket.org/broukema/mpgrafic.git
+.TP
+\-?, \fB\-\-help\fR
+Give this help list
+.TP
+\fB\-\-np\fR=\fI\,INTEGER\/\fR
+Number of particles per dimension
+.TP
+\fB\-\-usage\fR
+Give a short usage message
+.TP
+\fB\-V\fR, \fB\-\-version\fR
+Print program version
+.SH AUTHOR
+Written by Simon Prunet, Christophe Pichon et al.
+.SH COPYRIGHT
+Copyright \(co 2008\-2016 Prunet, Pichon, Roukema.
+This program is free software; you may redistribute it under the terms of
+the GNU General Public License version 2 or later. This program has
+absolutely no warranty.
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! mpgrafic - MPI version of N-body initial conditions grafic package !
+! Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al !
+! prunet iap.fr !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+!ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+#include "../config.h"
+
+program grafic1
+ ! Generate initial conditions for cosmological N-body integration
+ ! as a Gaussian random field.
+ ! This version does not do constraints. Instead, it produces output
+ ! compatible with grafic2 for multiscale initial conditions.
+ ! Disk use: lun=10 is output file, lun=11 is temp files.
+ !
+ use grafic_types
+ use transform
+ use grafic_io
+ use normalize
+
+ use iso_C_binding
+ use wrap_rfftw3d_mod
+
+
+ implicit none
+#include "grafic1.inc"
+#ifdef ADD1US
+#define rfftw3d_f77_create_plan rfftw3d_f77_create_plan_
+#define rfftwnd_f77_destroy_plan rfftwnd_f77_destroy_plan_
+#define rfftwnd_f77_one_real_to_complex rfftwnd_f77_one_real_to_complex_
+ /*
+ mpgrafic-0.3.10 - shifted this routine to interface with iso_C_binding;
+ #define rfftw3d_f77_mpi_create_plan rfftw3d_f77_mpi_create_plan_
+ */
+#define rfftwnd_f77_mpi_destroy_plan rfftwnd_f77_mpi_destroy_plan_
+#define rfftwnd_f77_mpi rfftwnd_f77_mpi_
+#define rfftwnd_f77_mpi_local_sizes rfftwnd_f77_mpi_local_sizes_
+#endif
+
+ !c
+ !c Top grid mesh size.
+ !c
+ ! Can be overridden at ./configure stage, e.g.:
+ ! CFLAGS="${CFLAGS} -DMPGRAFIC_NP_DEFAULT=1024" ./configure
+#ifndef MPGRAFIC_NP_DEFAULT
+#define MPGRAFIC_NP_DEFAULT 256
+#endif
+
+ integer :: np1 = MPGRAFIC_NP_DEFAULT
+ integer :: np2 = MPGRAFIC_NP_DEFAULT
+ integer :: np3 = MPGRAFIC_NP_DEFAULT
+ integer io_status
+
+#ifdef SING
+ real(sp), dimension(:), allocatable :: f
+#else
+ real(dp), dimension(:), allocatable :: f
+#endif
+ real dx,x1o,x2o,x3o,xoff,fm
+ integer irand,itide,m1s,m2s,m3s !,m1off,m2off,m3off
+#ifdef HAVE_LIBGSL
+ integer (c_long) iseed
+#else
+ integer iseed
+#endif
+ integer m1t,m2t,m3t,m1offt,m2offt,m3offt
+ !integer i1,i2,i3, l1,l2,l3, m1,m2,m3
+ integer icomp,idim,nrefine
+ integer ipad, nxs, nys, nzs
+#ifdef HAVE_LIBGSL
+ integer (c_long) iseeds
+#else
+ integer iseeds
+#endif
+ !double precision lsigma
+ double precision twopi,sigma,dsigma,rombin !,sigmadispl
+ double precision dsigmadispl
+ parameter (twopi=6.283185307179586d0)
+ logical hanning
+ character(len=128) :: filename, small_file_name, small_kfile_name
+ real astart,omegam,omegav,h0,dladt,fomega,vfact,pbar,pcdm
+ real omegab,omegahdm,degen_hdm
+ real asig,dxr,dpls,dplus,adp
+ integer ierr, myid, status
+ type(c_ptr) :: plan, iplan
+ integer :: local_z_start,local_nz,local_y_start,local_ny
+ integer :: nx, ny, nz
+ integer :: total_local_size
+ integer :: local_z_starts, local_nzs, local_y_starts, local_nys, total_local_sizes
+ type(taille) :: headt, shtaille
+ type(cosmo) :: headc, shcosmo
+ character(len=128) :: outputfile
+
+ character(len=128) :: command_line_arg1 ! so far very limited options
+ logical :: help_only_arg = .false.
+
+ common /cosmoparms/ omegam,omegav,h0
+ common /cosmoparms2/ omegab,omegahdm,degen_hdm
+ common /dsig/ asig,dxr
+ external pbar,pcdm,dsigma,dsigmadispl,rombin,dplus,adp
+
+ one_command_line_argument: if(command_argument_count() .gt. 0)then
+ call get_command_argument(1,command_line_arg1)
+ command_line_arg1 = trim(command_line_arg1)
+ ! TODO: this is a minimal hack - consider the GNU argp library for more general options
+ if(command_line_arg1 == '-V' .or. &
+ command_line_arg1 == '--version')then
+ help_only_arg = .true.
+ write(*,'(a)')PACKAGE_STRING
+ write(*,'(a)')'Written by Simon Prunet, Christophe Pichon et al.'
+ write(*,'(a)')''
+ write(*,'(a)')'Copyright (C) 2008-2016 Prunet, Pichon, Roukema.'
+ write(*,'(a)')'This program is free software; you may redistribute it under the terms of'
+ write(*,'(a)')'the GNU General Public License version 2 or later. This program has'
+ write(*,'(a)')'absolutely no warranty.'
+ elseif(command_line_arg1 == '-h' .or. &
+ command_line_arg1 == '-?' .or. &
+ command_line_arg1 == '--help')then
+ help_only_arg = .true.
+ ! TODO: modularise this out to a documentation type file
+ write(*,'(a)')'Usage: mpgrafic [OPTION...] [< INPUT_FILE] [> OUTPUT_FILE]'
+ write(*,'(a)')''
+ write(*,'(a)')'mpgrafic produces initial conditions files for N-body simulations of'
+ write(*,'(a)')'cosmological large-scale structure formation. It is a free-licensed,'
+ write(*,'(a)')"MPI-parallelised, rewritten version of Ed Bertschinger's grafic-1"
+ write(*,'(a)')'program, producing output files in the grafic format. It includes'
+ write(*,'(a)')'options for an Eisenstein and Hu baryonic wiggles power spectrum, for'
+ write(*,'(a)')'using a low-resolution map for large-scale modes in the spirit of'
+ write(*,'(a)')'grafic-2, and together with constrfield, can be used for generating'
+ write(*,'(a)')'constrained initial conditions. Details are given in Prunet et al'
+ write(*,'(a)')'(2008) http://cdsads.u-strasbg.fr/abs/2008ApJS..178..179P.'
+ write(*,'(a)')''
+ write(*,'(a)')'Most recent source code:'
+ write(*,'(a)')'git clone https://broukema@bitbucket.org/broukema/mpgrafic.git'
+ write(*,'(a)')''
+ write(*,'(a)')' -?, --help Give this help list'
+ write(*,'(a)')' --np=INTEGER Number of particles per dimension'
+ write(*,'(a)')' --usage Give a short usage message'
+ write(*,'(a)')' -V, --version Print program version'
+ elseif(command_line_arg1 == '--usage')then
+ help_only_arg = .true.
+ write(*,'(a)')'Usage: mpgrafic [-?hV] [--np=INTEGER] [--help] [--usage]'
+ write(*,'(a)')' [--version] [< INPUT_FILE] [> OUTPUT_FILE]'
+ elseif( command_line_arg1(1:5) == '--np=' .and. &
+ len(command_line_arg1) .gt. 5 )then
+ read(command_line_arg1(6:len(command_line_arg1)), &
+ *,iostat=io_status) np1 ! allows 10^30-particle simulations...
+ if(io_status.eq.0)then !override configured value
+ np2 = np1
+ np3 = np1
+ else
+ write(*,'(a)')'Warning: error reading option --np.'
+ endif
+ endif
+ if(help_only_arg)then ! if valid command line argument found
+ stop ! user only wants to know how to get started
+ endif
+ endif one_command_line_argument
+
+ !
+ call mpi_init(ierr)
+ call mpi_comm_rank(mpi_comm_world,myid,ierr)
+ if (myid==0) then
+ print*
+ print*,'Will generate initial conditions on grid of size ', &
+ & np1,np2,np3
+ print*
+ endif
+
+ ! We follow grafic conventions: slowest varying index is nz
+ ! The domain decomposition will be done in this direction
+ nx=np1
+ ny=np2
+ nz=np3
+
+ !
+ ! Initialize power spectrum.
+ call pini
+ ! Initialize grid spacing.
+ if (myid==0) then
+ print*,'Enter dx (initial particle spacing in Mpc, not Mpc/h)'
+ print*,' or enter -boxlength in Mpc/h'
+ print*,' i.e. dx in Mpc if > 0, or -boxlength in Mpc/h if < 0'
+ read(*,*) dx
+ write(*,'(f15.5)') dx
+ endif
+ call mpi_bcast(dx,1,mpi_real,0,mpi_comm_world,ierr)
+ if (dx.lt.0.0) then
+ dx=-dx*100./(h0*nx)
+ if (myid==0) write(*,'(a,f15.5,a)') ' dx=',dx,' Mpc'
+ end if
+
+ ! Set astart based on smallest grid spacing.
+ if (myid==0) then
+ print*,'Enter 1 if these initial conditions will not be ', &
+ & 'refined, otherwise'
+ print*,' enter the ultimate refinement factor for the ', &
+ & 'smallest grid spacing'
+ print*,' (This is used only to set astart.)'
+ read(*,*) nrefine
+ print*, nrefine
+ endif
+ call mpi_bcast(nrefine,1,mpi_integer,0,mpi_comm_world,ierr)
+ if (nrefine.lt.1) then
+ if (myid==0) print*,'Error! refinement factor must be >= 1'
+ call mpi_finalize(ierr)
+ stop
+ end if
+ if (nrefine.gt.1) then
+ if (myid==0) print*,'nrefine>1 not implemented yet'
+ call mpi_finalize(ierr)
+ stop
+ end if
+ dxr=dx/nrefine
+ asig=1.0d0
+ sigma=2.0*twopi*rombin(dsigma,0.0d0,0.5d0*twopi/dxr,1.0d-7)
+ ! This is sigma at a=1.
+ sigma=sqrt(sigma)
+
+!!!!!!!! ALL following !!$ are to remove R. Teyssier's astart and
+!!!!!!!! sigma computations....
+
+!!$ sigmadispl=2.0*twopi* &
+!!$ & rombin(dsigmadispl,twopi/dxr/np1,0.5d0*twopi/dxr,1.0d-7)
+ ! This is sigma at a=1.
+!!$ sigmadispl=sqrt(sigmadispl)
+!!$ sigma=MAX(sigma,sigmadispl/dxr)
+ ! Normalize so that rms density flutuation=sigstart at starting
+ ! redshift scaling back the fluctuations as if they grew like cdm.
+ dpls=sigstart/sigma*dplus(1.0,omegam,omegav)
+ astart=adp(dpls,omegam,omegav)
+ asig=astart
+ sigma=2.0*twopi*rombin(dsigma,0.0d0,0.5d0*twopi/dxr,1.0d-7)
+!!$ sigma=2.0*twopi*rombin(dsigma,twopi/dxr/np1,0.5d0*twopi/ &
+!!$ & dxr,1.0d-7)
+ sigma=sqrt(sigma)
+ if (myid==0) then
+ write(*,'(a,es15.5)') 'Scaling initial conditions to starting a=',astart
+ write(*,'(a,es15.5)') ' when sigma(delta) at ultimate refinement scale=' &
+ & ,real(sigma)
+ endif
+ !sigmadispl=2.0*twopi*rombin(dsigmadispl,0.0d0,0.5d0*twopi/dxr,1.0d-7)
+!!$ sigmadispl=2.0*twopi* &
+!!$ & rombin(dsigmadispl,twopi/dxr/np1,0.5d0*twopi/dxr,1.0d-7)
+!!$ sigmadispl=sqrt(sigmadispl)
+!!$ if (myid==0) then
+!!$ print*,' when sigma(displ) at ultimate refinement scale=', &
+!!$ & real(sigmadispl),' Mpc '
+!!$ print*,' ', &
+!!$ & real(sigmadispl)/dxr,' dx'
+!!$ print*
+!!$ endif
+
+!!!!!!!! END OF astart/sigma modifications. Code should be back to
+!!!!!!!! original grafic1 starting conditions....
+
+
+ ! velocity (proper km/s) = Displacement (comoving Mpc at astart) * vfact.
+ ! vfact = dln(D+)/dtau where tau=conformal time.
+ vfact=fomega(astart,omegam,omegav) &
+ & *h0*dladt(astart,omegam,omegav)/astart
+ if (myid==0) write(*,'(a,es15.5)') 'vfact=',vfact
+ !
+ ! Now set output parameters. There are two cases:
+ ! hanning=T: no further refinement.
+ ! hanning=F: prepare for further refinement.
+ !
+ if (myid==0) then
+ print*,'Enter 0 for final output or 1 for further refinement'
+ read(*,*) irand
+ print*, irand
+ endif
+ call mpi_barrier(mpi_comm_world,ierr)
+ call mpi_bcast(irand,1,mpi_integer,0,mpi_comm_world,ierr)
+
+ if (irand.eq.1) then
+ if (myid==0) print*,'Further refinement (input to grafic2) not implemented yet'
+ call mpi_finalize(ierr)
+ stop
+ endif
+
+!!$ if (irand.eq.1) then
+!!$ hanning=.false.
+!!$ if (myid==0) print*,'Enter size (n1c,n2c,n3c) of the level-1 subgrid ', &
+!!$ & 'to be extracted.'
+!!$ if (myid==0) print*,' Sizes must be even numbers and be no larger than ', &
+!!$ & int(0.5*np1),int(0.5*np2),int(0.5*np3)
+!!$ read(*,*) m1s,m2s,m3s
+!!$ if (mod(m1s,2).ne.0.or.mod(m2s,2).ne.0.or.mod(m3s,2).ne.0) then
+!!$ if (myid==0) print*,'Error! Sizes must be even numbers!'
+!!$ call mpi_finalize(ierr)
+!!$ stop
+!!$ end if
+!!$ if (2*m1s.gt.np1.or.2*m2s.gt.np2.or.2*m3s.gt.np3) then
+!!$ if (myid==0) print*,'Error! Subgrid is too large'
+!!$ call mpi_finalize(ierr)
+!!$ stop
+!!$ end if
+!!$ if (myid==0) then
+!!$ print*,'Enter offset of level-1 subgrid (m1off,m2off,m3off).'
+!!$ print*,' Offsets are relative to level-0 grid corner.'
+!!$ print*,' Offsets may be positive or negative, with absolute ', &
+!!$ & ' values no larger than',int(0.5*np1),int(0.5*np2),int(0.5*np3)
+!!$ endif
+!!$ read(*,*) m1off,m2off,m3off
+!!$ ! Now get coordinates for tidal volume.
+!!$ if (myid==0) print*,'Enter size (m1t,m2t,m3t) of the final subvolume, ', &
+!!$ & 'in units of top grid spacing'
+!!$ read(*,*) m1t,m2t,m3t
+!!$ if (m1t.gt.m1s.or.m2t.gt.m2s.or.m3t.gt.m3s) then
+!!$ if (myid==0) print*,'Error! Final subvolume cannot be larger than ', &
+!!$ & 'level-1 subgrid'
+!!$ call mpi_finalize(ierr)
+!!$ stop
+!!$ end if
+!!$ if (myid==0) then
+!!$ print*,'Enter offset of final subvolume (m1offt,m2off2,m3offt).'
+!!$ print*,' Offsets are relative to level-0 grid corner.'
+!!$ print*,' Final subvolume must lie within level-1 subgrid'
+!!$ endif
+!!$ read(*,*) m1offt,m2offt,m3offt
+!!$ if (m1offt.lt.m1off.or.m1offt+m1t.gt.m1off+m1s.or. &
+!!$ & m2offt.lt.m2off.or.m2offt+m2t.gt.m2off+m2s.or. &
+!!$ & m3offt.lt.m3off.or.m3offt+m3t.gt.m3off+m3s) then
+!!$ if (myid==0) print*,'Error! Final subvolume isn''t contained within ', &
+!!$ & 'level-1 subgrid'
+!!$ call mpi_finalize(ierr)
+!!$ stop
+!!$ end if
+!!$ ! Coordinates of the subgrid corner.
+!!$ x1o=m1off*dx
+!!$ x2o=m2off*dx
+!!$ x3o=m3off*dx
+!!$ if (myid==0) then
+!!$ print*,'Grafic1 will output level-1 subgrid as follows:'
+!!$ print*,' xmin, xmax = ',x1o,x1o+m1s*dx
+!!$ print*,' ymin, ymax = ',x2o,x2o+m2s*dx
+!!$ print*,' zmin, zmax = ',x3o,x3o+m3s*dx
+!!$ print*,'Grafic1 will compute tides assuming final subvolume:'
+!!$ print*,' xmin, xmax = ',m1offt*dx,(m1offt+m1t)*dx
+!!$ print*,' ymin, ymax = ',m2offt*dx,(m2offt+m2t)*dx
+!!$ print*,' zmin, zmax = ',m3offt*dx,(m3offt+m3t)*dx
+!!$ endif
+!!$ ! Open output file and write header.
+!!$ open(10,file='grafic2.top',form='unformatted',status='unknown')
+!!$ rewind 10
+!!$ write(10) 2*m1s,2*m2s,2*m3s,dx,x1o,x2o,x3o,m1t,m2t,m3t, &
+!!$ & m1offt-m1off,m2offt-m2off,m3offt-m3off,hanning,astart, &
+!!$ & omegam,omegav,h0
+!!$ if (myid==0) print*,'Output file is grafic2.top; use as input to subsequent', &
+!!$ & ' run of grafic2'
+!!$ else
+ hanning=.false.
+ m1s=np1 !Unused here...
+ m2s=np2 !Unused here...
+ m3s=np3 !Unused here...
+ x1o=0.0
+ x2o=0.0
+ x3o=0.0
+ if (myid==0) then
+ print*,'Setting output grid to ',m1s,m2s,m3s
+ print*,'Enter <RETURN> to skip output grid size'
+ read(*,*)
+ print*,'Enter <RETURN> to skip output grid offset'
+ read(*,*)
+ print*,'Enter <RETURN> to skip final grid size'
+ read(*,*)
+ print*,'Enter <RETURN> to skip final grid offset'
+ read(*,*)
+ print*,'Will produce output files ic_deltab, ic_velb[xyz],', &
+ & ' ic_velc[xyz]'
+ endif
+!!$end if
+ call mpi_barrier(mpi_comm_world,ierr)
+ ! Set parameters for subgrid noise.
+ if (myid==0) then
+ print*
+ print*,'Subgrid white noise:'
+ print*,' Choose irand (1 or 2) from the following list:'
+ ! print*,' irand=0 to generate new noise and don''t save it'
+ print*,' irand=1 to generate new noise and save to file'
+ print*,' irand=2 to read noise from existing file'
+ print*,'Enter irand'
+ read(*,*) irand
+ print*, irand
+ endif
+ call mpi_barrier(mpi_comm_world,ierr)
+ call mpi_bcast(irand,1,mpi_integer,0,mpi_comm_world,ierr)
+ if (irand.lt.0.or.irand.gt.2) then
+ if (myid==0) print*,'Illegal value of irand'
+ call mpi_finalize(ierr)
+ stop
+ end if
+
+ if (myid==0) then
+ print*,' Enter random number seed (9-digit integer, ignored ', &
+ & 'if irand=2)'
+ read(*,*) iseed
+ write(*,'(i12)') iseed
+ endif
+ call mpi_barrier(mpi_comm_world,ierr)
+#ifdef HAVE_LIBGSL
+ call mpi_bcast(iseed,1,mpi_long,0,mpi_comm_world,ierr)
+#else
+ call mpi_bcast(iseed,1,mpi_integer,0,mpi_comm_world,ierr)
+#endif
+ filename=''
+ if (myid==0) then
+ print*,' Enter filename of white noise file (or <RETURN> ', &
+ & 'if irand=0)'
+ read(*,'(a)') filename
+ print*,filename
+ endif
+ call mpi_barrier(mpi_comm_world,ierr)
+ ! filename='white.dat'
+ ! filename is needed by other cpus (to read or write)
+ call mpi_bcast(filename,128,mpi_character,0,mpi_comm_world,ierr)
+ ! print*,'in mpgrafic, filename is ','***'//trim(filename)//'***'
+
+ ! Ask if padding of small k modes is required
+ if (myid==0) then
+ print*,' Enter 1 if padding of large scales is required, 0 otherwise'
+ read(*,*) ipad
+ print*, ipad
+ endif
+ call mpi_barrier(mpi_comm_world,ierr)
+ call mpi_bcast(ipad,1,mpi_integer,0,mpi_comm_world,ierr)
+ small_file_name=''
+ if (myid==0) then
+ print*,' Enter padding file name (white noise format, ignored if ipad=0)'
+ read(*,'(a)') small_file_name
+ print*, small_file_name
+ endif
+ call mpi_barrier(mpi_comm_world,ierr)
+ call mpi_bcast(small_file_name,128,mpi_character,0,mpi_comm_world,ierr)
+
+ ! Compute small k modes from small file and store them, if needed
+ small_kfile_name='ksmall'
+ if (ipad==1) then
+ if (myid==0) then
+ print*,' Will compute the large scales from file ', trim(small_file_name)
+ print*,' Beware that the large scales are assumed to be prewhitened, '
+ print*,' and that the constraints are assumed to be imposed with the same '
+ print*,' power spectrum: cosmologies of small and large k modes need to be '
+ print*,' consistent...'
+ endif
+!!$ call grafic_read_header(small_file_name,shtaille,shcosmo)
+!!$ nxs=shtaille%nx
+!!$ nys=shtaille%ny
+!!$ nzs=shtaille%nz
+ call grafic_read_header_white(small_file_name,nxs,nys,nzs,iseeds)
+ call rfftw3d_f77_mpi_create_plan_c_wrap(plan,mpi_comm_world,nxs,nys,nzs, &
+ & fftw_real_to_complex,fftw_estimate)
+ call rfftwnd_f77_mpi_local_sizes(plan,local_nzs,local_z_starts, &
+ & local_nys, local_y_starts, total_local_sizes)
+ allocate(f(total_local_sizes))
+ call grafic_read(f,local_nzs,local_z_starts,nys,nxs,small_file_name,white_in=.true.)
+ ! Make sure avg is 0 and rms is 1
+#ifndef NO_NORM_WHITE
+ call mpnorm(local_nzs,nzs,nys,nxs,total_local_sizes,f)
+#endif
+ ! Normalise a la Bertschinger
+ f = f/sqrt(real(nxs*nys,dp)*nzs)
+ call fft_mpi(plan,f,total_local_sizes)
+ ! Scale small grid power to large grid
+ ! f = f*real(np1*np2,dp)*np3/real(nxs*nys*nzs,dp)
+ call rfftwnd_f77_mpi_destroy_plan(plan)
+ shtaille%nx=nxs
+ shtaille%ny=nys
+ shtaille%nz=nzs
+ if (myid==0) call grafic_write_header(small_kfile_name,shtaille, &
+ & shcosmo)
+ call mpi_barrier(mpi_comm_world,ierr)
+ call grafic_write(f,local_nzs,local_z_starts,nys,nxs,small_kfile_name, &
+ & padding_in=.true.)
+ deallocate(f)
+ endif
+
+ ! Compute local buffer size from total grid size, and prepare fftw
+ ! plans. Beware that domain decomposition is done along nx...
+ ! (Slowest varying dimension in the array)
+
+ call rfftw3d_f77_mpi_create_plan_c_wrap(plan,mpi_comm_world,nx,ny,nz, &
+ fftw_real_to_complex, fftw_estimate)
+ call rfftw3d_f77_mpi_create_plan_c_wrap(iplan,mpi_comm_world,nx,ny,nz, &
+ fftw_complex_to_real, fftw_estimate)
+ call rfftwnd_f77_mpi_local_sizes(plan,local_nz,local_z_start,local_ny, &
+ local_y_start,total_local_size)
+
+ if (total_local_size <= 0) then
+ if (myid==0) then
+ print*,'Beware: size of local buffers does not fit in 4 bits !'
+ print*,'Use with a bigger number of processes ...'
+ print*,'Aborting'
+ endif
+ call mpi_finalize(ierr)
+ stop
+
+ endif
+!
+ ! Outer loop over components to be refined.
+ !
+ do icomp=0,12
+ ! 0: baryon density.
+ ! 1,2: inner,outer baryon x-velocity.
+ ! 3,4: inner,outer baryon y-velocity.
+ ! 5,6: inner,outer baryon z-velocity.
+ ! 7,8: inner,outer CDM x-velocity.
+ ! 9,10: inner,outer CDM y-velocity.
+ ! 11,12: inner,outer CDM z-velocity.
+ !
+ ! If not generating grafic2.dat for further refinement, and
+ ! if icomp=odd, then skip.
+ if (mod(icomp,2).eq.1) cycle
+ !
+ ! Optional half-grid offset to velocity fields.
+ if (icomp.gt.0.and.icomp.le.6) then
+ xoff=0.5*dx*offvelb
+ else if (icomp.gt.6) then
+ xoff=0.5*dx*offvelc
+ else
+ xoff=0.0
+ end if
+ ! Don't need to recompute random numbers.
+ if (icomp.gt.0.and.irand.eq.1) irand=2
+ !
+ ! Generate random fields. idim=0,1,2,3 for density, displacement.
+ itide=0
+ if (mod(icomp,2).eq.0) then
+ idim=icomp/2
+ ! Outer case.
+ ! if (.not.hanning.and.idim.gt.0) itide=1
+ else
+ ! Inner case.
+ idim=(icomp+1)/2
+ ! if (.not.hanning.and.idim.gt.0) itide=-1
+ end if
+ allocate(f(total_local_size),stat=status)
+ if (status /= 0) then
+ print*,'Could not allocate array, aborting'
+ call mpi_finalize(ierr)
+ stop
+ endif
+ ! First Feed the headers...
+ headt%nx=np1
+ headt%ny=np2
+ headt%nz=np3
+ headt%dx=dx
+ headt%lx=x1o+xoff
+ headt%ly=x2o+xoff
+ headt%lz=x3o+xoff
+ headc%astart=astart
+ headc%omegam=omegam
+ headc%omegav=omegav
+ headc%h0=h0
+
+ if (idim.le.3) then
+ call mpic4(idim,irand,iseed,itide,m1t,m2t,m3t,m1offt,m2offt, &
+ & m3offt,hanning,filename,astart,pbar,dx,xoff,f,fm, &
+ & plan,iplan,local_nz,local_z_start,total_local_size, &
+ & headt,headc,small_kfile_name,ipad, &
+ & np1,np2,np3)
+ else
+ idim=idim-3
+ call mpic4(idim,irand,iseed,itide,m1t,m2t,m3t,m1offt,m2offt, &
+ & m3offt,hanning,filename,astart,pcdm,dx,xoff,f,fm, &
+ & plan,iplan,local_nz,local_z_start,total_local_size, &
+ & headt,headc,small_kfile_name,ipad, &
+ & np1,np2,np3)
+ end if
+
+ !
+ ! Prepare data for output.
+ !
+ if (.true.) then
+ ! For a version of RAMSES much older than 2013, you may have
+ ! to comment out the following line; however, using such an
+ ! out-of-date version of RAMSES would be unwise.
+ if (idim > 0) f = f*vfact
+ ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+ ! Output files.
+ if (icomp.eq.0) then
+ outputfile='ic_deltab'
+ else if (icomp.eq.2) then
+ outputfile='ic_velbx'
+ else if (icomp.eq.4) then
+ outputfile='ic_velby'
+ else if (icomp.eq.6) then
+ outputfile='ic_velbz'
+ else if (icomp.eq.8) then
+ outputfile='ic_velcx'
+ else if (icomp.eq.10) then
+ outputfile='ic_velcy'
+ else if (icomp.eq.12) then
+ outputfile='ic_velcz'
+ end if
+ if (myid==0) then
+ headt%nx=np1
+ headt%ny=np2
+ headt%nz=np3
+ headt%dx=dx
+ headt%lx=x1o+xoff
+ headt%ly=x2o+xoff
+ headt%lz=x3o+xoff
+ headc%astart=astart
+ headc%omegam=omegam
+ headc%omegav=omegav
+ headc%h0=h0
+ call grafic_write_header(outputfile,headt,headc)
+ endif
+ call mpi_barrier(mpi_comm_world,ierr)
+ call grafic_write(f,local_nz,local_z_start,ny,nx,outputfile)
+ endif ! subgrid is not implemented...
+
+!!$ else
+!!$ ! hanning=F, extract next-level subgrid and append to grafic2.dat.
+!!$ ! First surround subvolume with 1/2-size buffer and wrap periodically.
+!!$ sigma=0.0
+!!$ do m3=1,2*m3s
+!!$ i3=m3+m3off
+!!$ ! Periodic boundary conditions on top grid.
+!!$ if (i3.lt.1) i3=i3+np3
+!!$ if (i3.gt.np3) i3=i3-np3
+!!$ l3=i3
+!!$ if (m3.gt.1.5*m3s) l3=l3-2*m3s
+!!$ if (l3.lt.1) l3=l3+np3
+!!$ do m2=1,2*m2s
+!!$ i2=m2+m2off
+!!$ if (i2.lt.1) i2=i2+np2
+!!$ if (i2.gt.np2) i2=i2-np2
+!!$ l2=i2
+!!$ if (m2.gt.1.5*m2s) l2=l2-2*m2s
+!!$ if (l2.lt.1) l2=l2+np2
+!!$ do m1=1,2*m1s
+!!$ i1=m1+m1off
+!!$ if (i1.lt.1) i1=i1+np1
+!!$ if (i1.gt.np1) i1=i1-np1
+!!$ l1=i1
+!!$ if (m1.gt.1.5*m1s) l1=l1-2*m1s
+!!$ if (l1.lt.1) l1=l1+np1
+!!$ slice(m1,m2)=f(l1,l2,l3)
+!!$ sigma=sigma+f(l1,l2,l3)**2
+!!$ end do
+!!$ end do
+!!$ write(10) ((slice(m1,m2),m1=1,2*m1s),m2=1,2*m2s)
+!!$ end do
+!!$ sigma=sqrt(sigma/(8*m1s*m2s*m3s))
+!!$ if (myid==0) print*,'After extraction, component ',icomp, &
+!!$ & ' has subvolume RMS=',real(sigma)
+!!$ end if
+ ! End loop over icomp.
+ deallocate(f)
+ enddo
+ !
+!!$if (.not.hanning) close(10)
+ call mpi_finalize(ierr)
+ stop
+end program grafic1
+
+ !ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+function dsigma(ak)
+ ! This function calculates the variance of density with a Hanning
+ ! filter at the grid Nyquist frequency.
+ !
+ implicit none
+ double precision dsigma,ak
+ real asig,dx,p
+ common /dsig/ asig,dx
+ external p
+ !
+ if (ak.le.0.0d0.or.ak.gt.3.1415926535898d0/dx) then
+ dsigma=0.0d0
+ return
+ end if
+ ! Hanning filter.
+ dsigma=ak*ak*p(real(ak),asig)*cos(0.5*ak*dx)
+ !
+ return
+end function dsigma
+
+ !ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+function dsigmadispl(ak)
+ ! This function calculates the variance of displacement with a Hanning
+ ! filter at the grid Nyquist frequency.
+ !
+ implicit none
+ double precision dsigmadispl,ak
+ real asig,dx,p
+ common /dsig/ asig,dx
+ external p
+ !
+ if (ak.le.0.0d0.or.ak.gt.3.1415926535898d0/dx) then
+ dsigmadispl=0.0d0
+ return
+ end if
+ ! Hanning filter.
+ dsigmadispl=ak*ak*p(real(ak),asig)/ak/ak/3.*cos(0.5*ak*dx)
+ !
+ return
+end function dsigmadispl
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al !
+! prunet iap.fr !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+!ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+#include "../config.h"
+
+subroutine mpic4(idim,irand,iseed,itide,m1s,m2s,m3s,m1off, &
+ & m2off,m3off,hanning,filename,astart,pk,dx,xoff,f,fm, &
+ & plan,iplan,local_nz,local_z_start,total_local_size, &
+ & headt,headc,small_kfile_name,ipad, &
+ & np1,np2,np3)
+ ! Generate an unconstrained sample of (rho,psi1,psi2,psi3,phi) for
+ ! idim=0,1,2,3,4.
+ ! Input: idim, irand, iseed, itide, m?s, m?off, hanning, filename,
+ ! astart, pk, dx, xoff
+ ! irand=0: use randg to generate white noise, don't save.
+ ! irand=1: use randg to generate white noise, then save in real space
+ ! in filename.
+ ! irand=2: read filename to get random numbers.
+ ! iseed: 9-digit integer random number seed. Beware that rand8 does not
+ ! give the same random numbers on 32-bit and 64-bit machines!
+ ! itide=0 to use full subvolume for computing f.
+ ! itide=1 to set xi=0 inside subvolume so as to get outer field.
+ ! itide=-1 to set xi=0 outside subvolume so as to get inner field.
+ ! m?s = size of next-level subvolume to split if itide.ne.0.
+ ! m?off = offset of next-level subvolume to split if itide.ne.0
+ ! hanning=T to apply hanning filter to f.
+ ! hanning=F to not apply hanning filter to f.
+ ! filename = file containing random numbers in real space.
+ ! astart = expansion factor
+ ! pk(ak,astart) = power spectrum function for wavenumber ak
+ ! dx = grid spacing.
+ ! xoff = offset to evaluate fields (e.g. use to shift baryon or cdm fields).
+ ! Output: f=fc (sampled field in real space), fm (maximum absolute value of f).
+ ! N.B. f and fc must point to the same place in memory - they are listed
+ ! separately in the subroutine call because f77 will not allow equivalencing
+ ! pointers. The calling routine must pass the same pointer for each.
+ use grafic_types
+ use grafic_io
+ use transform
+ use normalize
+ use iso_C_binding
+#ifdef HAVE_LIBGSL
+ use wrap_gsl_rng_mod
+#endif
+ use random
+ use paste
+
+ implicit none
+#include "grafic1.inc"
+ integer :: np1, np2, np3
+ integer :: n12,n22,n32,n23,n2p1,npow
+ !parameter (n12=np1/2,n22=np2/2,n32=np3/2,n23=np2*np3)
+ !parameter (n2p1=2*(np1/2+1))
+ parameter (npow=30720)
+ integer idim,irand,itide,m1s,m2s,m3s,m1off,m2off,m3off
+#ifdef HAVE_LIBGSL
+ integer (c_long) iseed
+#else
+ integer iseed
+#endif
+ logical hanning
+ character(len=128) :: filename, small_kfile_name
+ integer :: ipad
+ type(taille) :: headt
+ type(cosmo) :: headc
+ real astart,pk,dx,xoff,fm
+ type(c_ptr) :: plan, iplan
+ integer :: local_nz, local_z_start
+ integer :: total_local_size
+#ifdef DOUB
+ real(dp), dimension(total_local_size) :: f
+#else
+ real(sp), dimension(total_local_size) :: f
+#endif
+ integer :: myid, nproc, ierr, i_proc
+#ifdef HAVE_LIBGSL
+ integer(c_long) :: seeds(MaxRandNumStreams,1)
+ integer(c_long) :: seed_myid ! avoid repeatedly re-calculating address
+#else
+ integer :: seeds(MaxRandNumStreams,IRandNumSize)
+#endif
+
+ integer(i8b) :: index
+ complex(dpc) :: z, ctemp
+
+ !real(dp) :: debug
+
+ real lfm
+ real(dp) :: twopi,avg,lavg,sigma,lsigma,chisq,lchisq
+ parameter (twopi=6.283185307179586d0)
+ integer j,i1,i2,i3,k1,k2,k3,k23,jp,modes
+ integer(i8b) :: ndof
+ real dk1,dk2,dk3,d3k,akmax,akmaxf,ak,ak23,akk,fact
+ real(dp) :: xr
+ real ak1,ak2,ak3,ak33,anu,dq,tf,tsav(0:npow),theta
+ !logical inflag, white_in
+ external pk
+
+ n12=np1/2
+ n22=np2/2
+ n32=np3/2
+ n23=np2*np3
+ n2p1=2*(np1/2+1)
+
+ call mpi_comm_rank(mpi_comm_world,myid,ierr)
+ call mpi_comm_size(mpi_comm_world,nproc,ierr)
+
+ if (idim.lt.0.or.idim.gt.4) then
+ if (myid==0) print*,'Error in ic4! Need idim=0,1,2,3,4'
+ call mpi_finalize(ierr)
+ stop
+ end if
+ if (irand.lt.0.or.irand.gt.2) then
+ if (myid==0) print*,'Error in ic4! Need irand=0,1,2'
+ call mpi_finalize(ierr)
+ stop
+ end if
+ if (itide.lt.-1.or.itide.gt.1) then
+ if (myid==0) print*,'Error in ic4! Need itide=-1,0,1'
+ call mpi_finalize(ierr)
+ stop
+ end if
+ dk1=twopi/(np1*dx)
+ dk2=twopi/(np2*dx)
+ dk3=twopi/(np3*dx)
+ d3k=dk1*dk2*dk3
+ akmax=twopi/dx
+ ! Precompute transfer function table for interpolation.
+ ! N.B. must go to at least sqrt(3)*akmax/2 unless use Hanning filter,
+ ! in which case go to akmax/2.
+ if (hanning) then
+ akmaxf=akmax/2.0
+ else
+ akmaxf=akmax
+ end if
+ do j=0,npow
+ ak=j*akmaxf/npow
+ tsav(j)=sqrt(pk(ak,astart)*d3k)
+ if (hanning) tsav(j)=tsav(j)*cos(0.5*ak*dx)
+ if (idim.gt.0.and.j.gt.0) then
+ tsav(j)=tsav(j)/(ak*ak)
+ end if
+ end do
+ ! Get white noise sample.
+ if (irand.lt.2) then
+ if (myid==0) print*,'Warning: Generating new random numbers in mpic4!'
+
+#ifdef HAVE_LIBGSL
+ ! create GSL rng object for generating seeds
+ if(nproc > MaxRandNumStreams) &
+ write(*,'(a,i8,a,i8)')'Warning: nproc = ',nproc, &
+ '> MaxRandNumStreams = ',MaxRandNumStreams
+ if(myid.eq.0)call get_gsl_rng_seeds &
+ (nproc,iseed, MaxRandNumStreams, seeds(:,1))
+#else
+ call rans(nproc,iseed,seeds) ! Generate seeds for parallel random number generator
+#endif
+ call mpi_barrier(mpi_comm_world,ierr)
+ if(myid.eq.0)write(*,'(a,i12,i12)')' myid,seeds: ',myid,seeds(1:nproc,1)
+#ifdef HAVE_LIBGSL
+ if(myid.eq.0)then
+ ! Send the seeds to each other thread (in GSL case really only
+ ! need to send one seed, but seeds is declared for the general case):
+ do i_proc=1,nproc-1
+ ! TODO: replace by broadcast or scatter?
+ call mpi_send(seeds,MaxRandNumStreams,mpi_long,i_proc, &
+ 0, &
+ mpi_comm_world, ierr) ! send the seeds
+ enddo
+ else
+ call mpi_recv(seeds,MaxRandNumStreams,mpi_long,0, &
+ 0, &
+ mpi_comm_world, MPI_STATUS_IGNORE, ierr)
+ endif
+#endif
+ ! Warning about nproc > MaxRandNumStreams given above.
+#ifdef HAVE_LIBGSL
+ seed_myid = seeds(mod(myid,MaxRandNumStreams)+1, 1)
+#endif
+ do i3=1,local_nz
+ do i2=1,np2
+ do i1=1,np1
+ index = int((i3-1)*np2+i2-1,8)*n2p1+i1
+#ifdef HAVE_LIBGSL
+ call gauss_gsl(seed_myid,xr,0)
+#else
+ call gaussdev(seeds(myid+1,:),xr)
+#endif
+#ifdef DOUB
+ f(index)=xr
+#else
+ f(index)=real(xr,kind=sp)
+#endif
+ end do
+ end do
+ end do
+#ifdef HAVE_LIBGSL
+ call gauss_gsl(seed_myid,xr,1) ! free memory on this thread
+#endif
+
+
+ ! Output white noise field.
+ if (irand.eq.1 .and. ipad.eq.0) then
+ if (myid==0) then
+ call grafic_write_header_white(filename,np1,np2,np3,iseed)
+ endif
+ call mpi_barrier(mpi_comm_world,ierr)
+ call grafic_write(f,local_nz,local_z_start,np2,np1,filename,white_in=.true.)
+ end if
+ else
+ ! irand=2.
+ if (myid==0) then
+ print*,'Reading random numbers used in ic4 from ',trim(filename)
+ call grafic_read_header_white(filename,i1,i2,i3,iseed)
+ endif
+ call mpi_barrier(mpi_comm_world,ierr)
+ call mpi_bcast(i1,1,mpi_integer,0,mpi_comm_world,ierr)
+ call mpi_bcast(i2,1,mpi_integer,0,mpi_comm_world,ierr)
+ call mpi_bcast(i3,1,mpi_integer,0,mpi_comm_world,ierr)
+#ifdef HAVE_LIBGSL
+ call mpi_bcast(iseed,1,mpi_long,0,mpi_comm_world,ierr)
+#else
+ call mpi_bcast(iseed,1,mpi_integer,0,mpi_comm_world,ierr)
+#endif
+ if (i1.ne.np1.or.i2.ne.np2.or.i3.ne.np3) then
+ if (myid==0) then
+ print*,'Error in ic4! file has np1,np2,np3=',i1,i2,i3
+ print*,' Expected ',np1,np2,np3
+ endif
+ call mpi_finalize(ierr)
+ stop
+ end if
+ if (myid==0) write(*,'(a,i12)')' Random numbers generated with iseed=',iseed
+ call mpi_barrier(mpi_comm_world,ierr)
+ call grafic_read(f,local_nz,local_z_start,np2,np1,filename,white_in=.true.)
+
+ end if
+ ! Make sure input (big) white noise box has stdev=1
+ ! Putting this out of if construct makes sure that ic_deltab is the
+ ! same wether irand=2 or irand=1 (when recycling the same white
+ ! noise box of course). Small difference remains if compiled with
+ ! DOUB, because white noise is stored in single precision
+ ! Can be bypassed by defining NO_NORM_WHITE at compile time.
+#ifndef NO_NORM_WHITE
+ if (myid==0) then
+ print*,'Normalizing rms, subtracting average'
+ endif
+ call mpnorm(local_nz,np3,np2,np1,total_local_size,f)
+#endif
+ ! Compute mean.
+ lavg=0.0
+ do i3=1,local_nz
+ do i2=1,np2
+ do i1=1,np1
+ index = int((i3-1)*np2+i2-1,8)*n2p1+i1
+#ifdef DOUB
+ lavg=lavg+f(index)
+#else
+ lavg=lavg+real(f(index),kind=dp)
+#endif
+ end do
+ end do
+ end do
+ ! Mean is needed on every cpu
+ !print*,'lavg = ',lavg
+ call mpi_allreduce(lavg,avg,1,mpi_double_precision,mpi_sum,mpi_comm_world,ierr)
+ avg=avg/(real(np1*np2,dp)*np3)
+ fact=sqrt(1.0*np1*np2*np3)
+
+ ! Enforce zero mean for simulations with periodic boundary conditions.
+ ! Compute chisq for this sample, too.
+ lchisq=0.0
+ do i3=1,local_nz
+ do i2=1,np2
+ do i1=1,np1
+ ! Subtract mean.
+ index=int((i3-1)*np2+i2-1,8)*n2p1+i1
+#ifdef DOUB
+ f(index)=f(index)-avg
+#else
+ f(index)=f(index)-real(avg,kind=sp)
+#endif
+ lchisq=lchisq+f(index)**2
+ ! Standard deviation is fact, but divide by np1*np2*np3=fact**2 to
+ ! normalize f for FFT
+#ifdef DOUB
+ f(index)=f(index)/fact
+#else
+ f(index)=f(index)/real(fact,kind=sp)
+#endif
+ end do
+ end do
+ end do
+
+ call mpi_reduce(lchisq,chisq,1,mpi_double_precision,mpi_sum,0,mpi_comm_world,ierr)
+
+ ndof=int(np1*np2,8)*np3-1
+ anu=(chisq-ndof)/sqrt(float(ndof))
+ if (myid==0) &
+ write(*,'(a,f15.5,i15,es15.5)') 'ic4 white noise: chisq, dof, nu=', &
+ & real(chisq),ndof,anu
+ ! Transform noise to k-space.
+ call fft_mpi(plan,f,total_local_size)
+
+
+ ! Paste if needed large scales, before applying transfer function
+ ! This means that the large scales have been prewhitened ...
+ if (ipad .eq. 1) then
+ call grid_paste(local_z_start,local_nz,headt,headc,f,small_kfile_name)
+ if (irand .eq. 1) then ! Output padded white noise file
+ if (myid==0) then
+ call grafic_write_header_white(filename,np1,np2,np3,iseed)
+ endif
+ call mpi_barrier(mpi_comm_world,ierr)
+ call fft_mpi(iplan,f,total_local_size)
+ f = f/fact ! Renormalize to compensate backward FFT
+ call grafic_write(f,local_nz,local_z_start,np2,np1,filename,white_in=.true.)
+ call fft_mpi(plan,f,total_local_size)
+ f = f/fact ! Renormalize to compensate forward FFT
+ endif
+ endif
+
+ lchisq=0.0
+ lsigma=0.0
+ ! Generate unconstrained sample in Fourier transform space.
+ do k3=1,local_nz
+ ak3=(k3+local_z_start-1)*dk3
+ if (k3+local_z_start.gt.n32) ak3=ak3-akmax
+ ak33=ak3*ak3
+ do k2=1,np2
+ ak2=(k2-1)*dk2
+ if (k2.gt.n22) ak2=ak2-akmax
+ ak23=ak2*ak2+ak33
+ k23=k2-1+(k3-1)*np2
+ do k1=1,n12 ! Complex
+ ! Do k1=n12+1 separately below.
+ ak1=(k1-1)*dk1
+ akk=ak1*ak1+ak23
+ ak=sqrt(akk)
+ ! Evaluate transfer function.
+ dq=npow*ak/akmaxf
+ if (dq.ge.npow) then
+ tf=0.0
+ else
+ jp=int(dq)
+ dq=dq-jp
+ tf=(1.0-dq)*tsav(jp)+dq*tsav(jp+1)
+ end if
+ ! Shift using offsets, with care at the Brillouin zone boundaries.
+ theta=ak1*xoff
+ if (k2.ne.n22+1) theta=theta+ak2*xoff
+ if (k3+local_z_start.ne.n32+1) theta=theta+ak3*xoff
+ z=cmplx(cos(theta),sin(theta),kind=dpc)
+
+ ! These factors correctly average shifts at the Nyquist planes.
+ if (k2.eq.n22+1) z=z*cos(ak2*xoff)
+ if (k3+local_z_start.eq.n32+1) z=z*cos(ak3*xoff)
+ ! Convolve white noise with transfer function.
+ index = int((k3-1)*np2+k2-1,8)*n2p1+2*k1-1 !Real index
+#ifdef DOUB
+ ctemp = cmplx(f(index),f(index+1),kind=dpc)
+#else
+ ctemp = cmplx(real(f(index),kind=dp),real(f(index+1),kind=dp))
+#endif
+ ctemp = ctemp*z*tf
+
+ if (idim.eq.1) then
+ ctemp=cmplx(0.0,1.0)*ak1*ctemp
+ else if (idim.eq.2) then
+ ctemp=cmplx(0.0,1.0)*ak2*ctemp
+ if (k2.eq.n22+1) ctemp=0.0
+ else if (idim.eq.3) then
+ ctemp=cmplx(0.0,1.0)*ak3*ctemp
+ if (k3+local_z_start.eq.n32+1) ctemp=0.0
+ end if
+ ! Double the contribution to account for modes with k1 > n12+1 (k1 < 0).
+ modes=2
+ if (k1.eq.1) modes=1
+ lsigma=lsigma+modes*ctemp*conjg(ctemp)
+ if (idim.eq.0.or.idim.eq.4) then
+ lchisq=lchisq+modes*tf*tf
+ else
+ lchisq=lchisq+modes*tf*tf*akk/3.0
+ end if
+ ! Fill back buffer with ctemp
+#ifdef DOUB
+ f(index) = real(ctemp)
+ f(index+1) = aimag(ctemp)
+#else
+ f(index) = real(ctemp,kind=sp)
+ f(index+1) = real(aimag(ctemp),kind=sp)
+#endif
+ enddo
+ ! Do k1=n12+1.
+ ak1=0.5*akmax
+ akk=ak1*ak1+ak23
+ ak=sqrt(akk)
+ index = int((k3-1)*np2+k2-1,8)*n2p1+np1+1
+ ! Evaluate transfer function.
+ dq=npow*ak/akmaxf
+ if (dq.ge.npow) then
+ tf=0.0
+ else
+ jp=int(dq)
+ dq=dq-jp
+ tf=(1.0-dq)*tsav(jp)+dq*tsav(jp+1)
+ end if
+ ! Shift using offsets, with care at the Brillouin zone boundaries.
+ theta=0.0
+ if (k2.ne.n22+1) theta=theta+ak2*xoff
+ if (k3+local_z_start.ne.n32+1) theta=theta+ak3*xoff
+ z=cmplx(cos(theta),sin(theta),kind=dpc)
+ ! These factors correctly average shifts at the Nyquist planes.
+ z=z*cos(ak1*xoff)
+ if (k2.eq.n22+1) z=z*cos(ak2*xoff)
+ if (k3+local_z_start.eq.n32+1) z=z*cos(ak3*xoff)
+ ! Convolve white noise with transfer function.
+#ifdef DOUB
+ ctemp = cmplx(f(index),f(index+1),kind=dpc)
+#else
+ ctemp = cmplx(real(f(index),kind=dp),real(f(index+1),kind=dp))
+#endif
+ ctemp = ctemp*z*tf
+ if (idim.eq.1) then
+ ctemp=0.0
+ else if (idim.eq.2) then
+ ctemp=cmplx(0.0,1.0)*ak2*ctemp
+ if (k2.eq.n22+1) ctemp=0.0
+ else if (idim.eq.3) then
+ ctemp=cmplx(0.0,1.0)*ak3*ctemp
+ if (k3+local_z_start.eq.n32+1) ctemp=0.0
+ end if
+ modes=1
+ lsigma=lsigma+modes*ctemp*conjg(ctemp)
+ if (idim.eq.0.or.idim.eq.4) then
+ lchisq=lchisq+modes*tf*tf
+ else
+ lchisq=lchisq+modes*tf*tf*akk/3.0
+ end if
+ ! Fill back buffer with ctemp
+#ifdef DOUB
+ f(index)=real(ctemp)
+ f(index+1)=aimag(ctemp)
+#else
+ f(index)=real(ctemp,kind=sp)
+ f(index+1)=real(aimag(ctemp),kind=sp)
+#endif
+ enddo
+ enddo
+ call mpi_barrier(mpi_comm_world,ierr)
+ ! Enforce zero mean.
+ if (local_z_start==0) then
+ f(1)=0
+ f(2)=0
+ endif
+ ! Reduce local statistics on root proc
+ !print*,'lchisq = ',lchisq
+ !print*,'lsigma = ',lsigma
+ call mpi_reduce(lchisq,chisq,1,mpi_double_precision,mpi_sum,0,mpi_comm_world,ierr)
+ call mpi_reduce(lsigma,sigma,1,mpi_double_precision,mpi_sum,0,mpi_comm_world,ierr)
+
+
+ chisq=sqrt(chisq)
+ sigma=sqrt(sigma)
+ ! Transform to position space.
+
+ call fft_mpi(iplan,f,total_local_size)
+ lfm=0.0
+ do i3=1,local_nz
+ do i2=1,np2
+ do i1=1,np1
+ index=int((i3-1)*np2+i2-1,8)*n2p1+i1
+#ifdef DOUB
+ lfm=max(lfm,abs(f(index)))
+#else
+ lfm=max(lfm,real(abs(f(index)),kind=dp))
+#endif
+ end do
+ end do
+ end do
+ ! Reduce max on root proc
+ call mpi_reduce(lfm,fm,1,mpi_real,mpi_max,0,mpi_comm_world,ierr)
+ if (myid==0) then
+ print*,'Statistics of ic4 for idim, itide=',idim,itide
+ write(*,'(a,3f15.5)') &
+ & ' Mean sigma, sampled sigma, maximum=',real(chisq), &
+ & real(sigma),fm
+ endif
+ return
+end subroutine mpic4
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al !
+! prunet iap.fr !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+module normalize
+
+ use grafic_types
+
+contains
+
+ subroutine mpnorm(local_nz,nz,ny,nx,total_local_size,buffer)
+
+ ! Arguments
+ integer, intent(in) :: local_nz,nz,ny,nx,total_local_size
+#ifdef DOUB
+ real(dp), dimension(total_local_size), intent(inout) :: buffer
+#else
+ real(sp), dimension(total_local_size), intent(inout) :: buffer
+#endif
+
+ ! Local variables
+ integer :: myid, nproc, ierr
+ real(dp) :: lmean, lstdev
+ integer :: i1,i2,i3
+ integer(i8b) :: index
+ integer :: n2x
+ real(dp) :: mean, stdev
+
+ call mpi_comm_rank(mpi_comm_world,myid,ierr)
+ call mpi_comm_size(mpi_comm_world,nproc,ierr)
+
+ n2x = 2*(nx/2+1)
+
+ lmean=0
+ do i3=1,local_nz
+ do i2=1,ny
+ do i1=1,nx ! Real space, ignore padding zone
+ index=int((i3-1)*ny+i2-1,8)*n2x+i1
+#ifdef DOUB
+ lmean = lmean+buffer(index)
+#else
+ lmean = lmean+real(buffer(index),kind=dp)
+#endif
+ enddo
+ enddo
+ enddo
+
+ call mpi_allreduce(lmean,mean,1,mpi_double_precision,mpi_sum,mpi_comm_world,ierr)
+ mean = mean/real(int(nx*ny,8)*nz,kind=dp)
+
+ if (myid==0) then
+ write(*,'(a,es15.5)') 'Mean value of the white noise box = ',mean
+ print*,'Will be removed'
+ endif
+
+ lstdev=0
+ do i3=1,local_nz
+ do i2=1,ny
+ do i1=1,nx ! Real space, skip padding zone
+ index=int((i3-1)*ny+i2-1,8)*n2x+i1
+#ifdef DOUB
+ buffer(index) = buffer(index)-mean
+ lstdev = lstdev+buffer(index)**2
+#else
+ buffer(index) = buffer(index)-real(mean,kind=sp)
+ lstdev = lstdev + real(buffer(index),kind=8)**2
+#endif
+ enddo
+ enddo
+ enddo
+
+ call mpi_allreduce(lstdev,stdev,1,mpi_double_precision,mpi_sum,mpi_comm_world,ierr)
+ stdev = stdev/real(int(nx*ny,8)*nz,kind=dp)
+ stdev = sqrt(stdev)
+ if (myid==0) then
+ write(*,'(a,f15.5)') 'Standard deviation of the white noise box = ',stdev
+ print*,'Will be factored out so that input stdev=1'
+ endif
+
+#ifdef DOUB
+ buffer = buffer/stdev
+#else
+ buffer = buffer/real(stdev,kind=sp)
+#endif
+
+
+ end subroutine mpnorm
+
+end module normalize
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al !
+! prunet iap.fr !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+!*****************************************************************************
+function p(ak,a)
+ ! p evaluates the power spectrum at wavenumber ak for expansion factor a.
+ ! It takes the nearest transfer function and scales it to a using the
+ ! cdm transfer function.
+ ! N.B. p is the 3-D spectral density and has units of 1/(ak*ak*ak).
+ ! N.B. ak has units of 1/Mpc, _not_ h/Mpc.
+
+ parameter (nkmax=1000,nt=11)
+ double precision atab(nt)
+ double precision y(nkmax,nt),dy(nkmax,nt),dk,akminl
+ double precision y1(nkmax,nt),dy1(nkmax,nt)
+ double precision y2(nkmax,nt),dy2(nkmax,nt)
+ real dplus,f_baryon,omhh
+ ! integer dummy
+ common /cosmoparms/ omegam,omegav,h0
+ common /cosmoparms2/ omegab,omegahdm,degen_hdm
+ common /pstuff/ atab,an,pnorm,icase,ilog,ntab
+ common /splin2/ y,dy,y1,dy1,y2,dy2,dk,akminl,nk
+ common /scaling/ a00,a10,scale
+ common /extwarn/ iwarn1,iwarn2
+
+
+ if (ak.le.0.0) then
+ p=0.0
+ return
+ end if
+ omega=omegam+omegav
+ !**************************************
+ ! Scale-free case.
+ if (icase.eq.3) then
+ if (a10.ne.a.or.a00.ne.1.0) then
+ a10=a
+ a00=1.0
+ scale=dplus(a,omegam,omegav)/dplus(1.0,omegam,omegav)
+ end if
+ p=pnorm*(scale**2)*(ak**an)
+ return
+ end if
+ !**************************************
+ ! Transfer function case. The transfer function T(k) is defined so
+ ! that for initial curvature perturbations, phi(k,a=1)=T(k)*psi(k,a=0)
+ ! where psi(k,a=0) has power spectrum pnorm*ak**(an-4) and phi(k,a=1)
+ ! is related to delta (actually, Bardeens gauge-invariant variable
+ ! epsilon_m) by the Poisson equation. For isocurvature initial
+ ! conditions, linger uses the initial entropy perturbation rather than
+ ! psi for normalization, but everything in this subroutine and in pini
+ ! below follows without change.
+ ! Two subcases: BBKS transfer function or tabulated transfer function
+ ! from linger.dat.
+ if (icase.eq.2) then
+ !**************************************
+ ! Use fit to matter transfer function.
+ ! Hubble constant in units of 100 km/sec/Mpc.
+ h=h0/100.0
+ !!omegab=0.039
+ omegahh=omegam*h*h !!*exp(-omegab*(1.+sqrt(h/0.5)/omegam))
+ q=ak/omegahh
+ ! Transfer function for cold dark matter (from BBKS).
+ a1=2.34*q
+ a2=3.89*q
+ a3=16.1*q
+ a4=5.46*q
+ a5=6.71*q
+ t=1.0+a2+a3*a3+a4*a4*a4+a5*a5*a5*a5
+ t=log(1.0+a1)/a1/sqrt(sqrt(t))
+ ! Transfer function for cold dark matter (90%) plus baryons (10%)
+ ! (from Holtzman).
+ ! if (h.eq.0.5) then
+ ! Commented out 10% baryons.
+ ! a1=-1.323
+ ! a2=29.12
+ ! a3=50.29
+ ! a4=57.39
+ ! These are for 5% baryons.
+ ! a1=-.9876
+ ! a2=26.27
+ ! a3=43.51
+ ! a4=50.45
+ ! else
+ ! if (h.ne.1.0) write(*,*) 'Assuming H0=100!'
+ ! Commented out 10% baryons.
+ ! a1=-.8282
+ ! a2=9.184
+ ! a3=4.806
+ ! a4=4.666
+ ! a1=-.4306
+ ! a2=6.505
+ ! a3=4.040
+ ! a4=3.337
+ ! endif
+ ! t=1.0/(1.0+a2*ak+sqrt(ak)*(a1+a3*ak)+a4*ak*ak)
+ ! Transfer function for cold dark matter (from DEFW).
+ ! a1=1.7*q
+ ! a2=4.327*q
+ ! a3=1.0*q
+ ! t=1.0/(1.0+a1+a2*sqrt(a2)+a3*a3)
+ ! Transfer function for hot dark matter (from BBKS).
+ ! a1=2.6*q
+ ! a2=1.6*q
+ ! a3=4.0*q
+ ! a4=0.92*q
+ ! t=exp(-0.16*a1-0.5*a1*a1)/(1.0+a2+a3*sqrt(a3)+a4*a4)
+ ! Apply transfer function to primordial power spectrum.
+ ! Primordial spectrum of psi (or entropy, in the isocurvature case):
+ p=pnorm*ak**(an-4.0)
+ ! Apply transfer function to get spectrum of phi at a=1.
+ p=p*t*t
+ ! Convert to density fluctuation power spectrum. Note that k^2 is
+ ! corrected for an open universe. Scale to a using linear theory.
+ tpois=-(2.0d0/3.0d0)/omegam*((ak*2.99793e5/h0)**2 &
+ & -4.*(omega-1.0))
+ if (a10.ne.a.or.a00.ne.1.0) then
+ a10=a
+ a00=1.0
+ scale=dplus(a,omegam,omegav)/dplus(1.0,omegam,omegav)
+ end if
+ p=p*tpois*tpois*scale**2
+ return
+
+ !***************************************************************
+ !************EISENSTEIN AND HU POWER SPECTRUM*****************
+ !***************************************************************
+ elseif (icase.eq.4) then
+ !**************************************
+ ! Use fit to matter transfer function.
+ ! Hubble constant in units of 100 km/sec/Mpc.
+ h=h0/100.0
+ ! Transfer function with Baryonic Wiggles
+ omhh = omegam*h*h
+ f_baryon=omegab/omegam
+ t=TFmdm_onek_mpc(ak,omhh,f_baryon)
+
+
+ ! Apply transfer function to primordial power spectrum.
+ ! Primordial spectrum of psi (or entropy, in the isocurvature case):
+ p=pnorm*ak**(an-4.0)
+ ! Apply transfer function to get spectrum of phi at a=1.
+ p=p*t*t
+ ! Convert to density fluctuation power spectrum. Note that k^2 is
+ ! corrected for an open universe. Scale to a using linear theory.
+ tpois=-(2.0d0/3.0d0)/omegam*((ak*2.99793e5/h0)**2 &
+ -4.*(omega-1.0))
+ if (a10.ne.a.or.a00.ne.1.0) then
+ a10=a
+ a00=1.0
+ scale=dplus(a,omegam,omegav)/dplus(1.0,omegam,omegav)
+ end if
+ p=p*tpois*tpois*scale**2
+ return
+ !
+ else
+ !**************************************
+ ! Use tabulated matter transfer function.
+ ! Find the first tabulated value exceeding a.
+ itt=0
+ do it=1,ntab
+ if (itt.eq.0.and.atab(it).gt.a) then
+ itt=it
+ end if
+ end do
+ if (itt.eq.0) itt=ntab
+ if (itt.eq.1) itt=2
+ dt=log(a/atab(itt-1))/log(atab(itt)/atab(itt-1))
+ if (ilog.eq.0) then
+ d=ak/dk
+ i=d
+ d=d-i
+ if (i.lt.1) then
+ if (iwarn1.eq.0) then
+ iwarn1=1
+ write(*,*) 'Warning: extrapolating k below kmin of linger.dat'
+ write(*,*) ' ak,akmin=',ak,dk
+ end if
+ t1=y(1,itt-1)
+ t2=y(1,itt)
+ else if (i.ge.nk) then
+ if (iwarn2.eq.0) then
+ iwarn2=1
+ write(*,*) 'Warning: extrapolating k beyond kmax of linger.dat'
+ write(*,*) ' ak,akmax=',ak,nk*dk
+ end if
+ dltdlk=log(y(nk,itt-1)/y(nk-1,itt-1))/log(nk/(nk-1.0))
+ dlk=log(ak/(nk*dk))
+ t1=y(nk,itt-1)*exp(dltdlk*dlk)
+ dltdlk=log(y(nk,itt)/y(nk-1,itt))/log(nk/(nk-1.0))
+ dlk=log(ak/(nk*dk))
+ t2=y(nk,itt)*exp(dltdlk*dlk)
+ else
+ t1=y(i,itt-1)+d*(dy(i,itt-1)+d*(3.0*(y(i+1,itt-1)-y(i,itt-1)) &
+ & -2.0*dy(i,itt-1)-dy(i+1,itt-1)+d*(dy(i,itt-1)+dy(i+1,itt-1) &
+ & +2.0*(y(i,itt-1)-y(i+1,itt-1)))))
+ t2=y(i,itt)+d*(dy(i,itt)+d*(3.0*(y(i+1,itt)-y(i,itt)) &
+ & -2.0*dy(i,itt)-dy(i+1,itt)+d*(dy(i,itt)+dy(i+1,itt) &
+ & +2.0*(y(i,itt)-y(i+1,itt)))))
+ end if
+ else
+ akl=log(ak)
+ d=(akl-akminl)/dk+1
+ i=d
+ d=d-i
+ if (i.lt.1) then
+ if (iwarn1.eq.0) then
+ iwarn1=1
+ write(*,*) 'Warning: extrapolating k below kmin of linger.dat'
+ write(*,*) ' ak,akmin=',ak,exp(akminl)
+ end if
+ t1=y(1,itt-1)
+ t2=y(1,itt)
+ else if (i.ge.nk) then
+ if (iwarn2.eq.0) then
+ iwarn2=1
+ write(*,*) 'Warning: extrapolating k beyond kmax of linger.dat'
+ write(*,*) ' ak,akmax=',ak,exp(akminl+(nk-1)*dk)
+ end if
+ dltdi=log(y(nk,itt-1)/y(nk-1,itt-1))
+ t1=y(nk,itt-1)*exp(dltdi*(d+i-nk))
+ dltdi=log(y(nk,itt)/y(nk-1,itt))
+ t2=y(nk,itt)*exp(dltdi*(d+i-nk))
+ else
+ t1=y(i,itt-1)+d*(dy(i,itt-1)+d*(3.0*(y(i+1,itt-1)-y(i,itt-1)) &
+ & -2.0*dy(i,itt-1)-dy(i+1,itt-1)+d*(dy(i,itt-1)+dy(i+1,itt-1) &
+ & +2.0*(y(i,itt-1)-y(i+1,itt-1)))))
+ t2=y(i,itt)+d*(dy(i,itt)+d*(3.0*(y(i+1,itt)-y(i,itt)) &
+ & -2.0*dy(i,itt)-dy(i+1,itt)+d*(dy(i,itt)+dy(i+1,itt) &
+ & +2.0*(y(i,itt)-y(i+1,itt)))))
+ end if
+ end if
+ t=(t1**(1.0-dt))*(t2**dt)
+ ! Apply transfer function to primordial power spectrum.
+ ! Primordial spectrum of psi (or entropy, in the isocurvature case):
+ p=pnorm*ak**(an-4.0)
+ ! Apply transfer function to get density fluctuation spectrum at a.
+ p=p*t*t
+ return
+ end if
+ !
+end function p
+!ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+function pcdm(ak,a)
+ ! p evaluates the cdm power spectrum at wavenumber ak for expansion factor a.
+ ! It takes the nearest transfer function and scales it to a using the
+ ! cdm transfer function.
+ ! N.B. p is the 3-D spectral density and has units of 1/(ak*ak*ak).
+ ! N.B. ak has units of 1/Mpc, _not_ h/Mpc.
+ !
+ parameter (nkmax=1000,nt=11)
+ double precision atab(nt)
+ double precision y(nkmax,nt),dy(nkmax,nt),dk,akminl
+ double precision y1(nkmax,nt),dy1(nkmax,nt)
+ double precision y2(nkmax,nt),dy2(nkmax,nt)
+ common /cosmoparms/ omegam,omegav,h0
+ common /pstuff/ atab,an,pnorm,icase,ilog,ntab
+ common /splin2/ y1,dy1,y,dy,y2,dy2,dk,akminl,nk
+ common /scaling/ a00,a10,scale
+ common /extwarn/ iwarn1,iwarn2
+
+ if (ak.le.0.0) then
+ pcdm=0.0
+ return
+ end if
+ !**************************************
+ ! Scale-free case.
+ if (icase.eq.3) then
+ pcdm=p(ak,a)
+ return
+ else if (icase.eq.2.or.icase.eq.4) then
+ !**************************************
+ ! Transfer function case. The transfer function T(k) is defined so
+ ! that for initial curvature perturbations, phi(k,a=1)=T(k)*psi(k,a=0)
+ ! where psi(k,a=0) has power spectrum pnorm*ak**(an-4) and phi(k,a=1)
+ ! is related to delta (actually, Bardeens gauge-invariant variable
+ ! epsilon_m) by the Poisson equation. For isocurvature initial
+ ! conditions, linger uses the initial entropy perturbation rather than
+ ! psi for normalization, but everything in this subroutine and in pini
+ ! below follows without change.
+ ! Two subcases: BBKS transfer function or tabulated transfer function
+ ! from linger.dat.
+ !**************************************
+ pcdm=p(ak,a)
+ return
+ end if
+ ! Use tabulated matter transfer function.
+ ! First the first tabulated value exceeding a.
+ itt=0
+ do it=1,ntab
+ if (itt.eq.0.and.atab(it).gt.a) then
+ itt=it
+ end if
+ end do
+ if (itt.eq.0) itt=ntab
+ if (itt.eq.1) itt=2
+ dt=log(a/atab(itt-1))/log(atab(itt)/atab(itt-1))
+ if (ilog.eq.0) then
+ d=ak/dk
+ i=d
+ d=d-i
+ if (i.lt.1) then
+ if (iwarn1.eq.0) then
+ iwarn1=1
+ write(*,*) 'Warning: extrapolating k below kmin of linger.dat'
+ write(*,*) ' ak,akmin=',ak,dk
+ end if
+ t1=y(1,itt-1)
+ t2=y(1,itt)
+ else if (i.ge.nk) then
+ if (iwarn2.eq.0) then
+ iwarn2=1
+ write(*,*) 'Warning: extrapolating k beyond kmax of linger.dat'
+ write(*,*) ' ak,akmax=',ak,nk*dk
+ end if
+ dltdlk=log(y(nk,itt-1)/y(nk-1,itt-1))/log(nk/(nk-1.0))
+ dlk=log(ak/(nk*dk))
+ t1=y(nk,itt-1)*exp(dltdlk*dlk)
+ dltdlk=log(y(nk,itt)/y(nk-1,itt))/log(nk/(nk-1.0))
+ dlk=log(ak/(nk*dk))
+ t2=y(nk,itt)*exp(dltdlk*dlk)
+ else
+ t1=y(i,itt-1)+d*(dy(i,itt-1)+d*(3.0*(y(i+1,itt-1)-y(i,itt-1)) &
+ & -2.0*dy(i,itt-1)-dy(i+1,itt-1)+d*(dy(i,itt-1)+dy(i+1,itt-1) &
+ & +2.0*(y(i,itt-1)-y(i+1,itt-1)))))
+ t2=y(i,itt)+d*(dy(i,itt)+d*(3.0*(y(i+1,itt)-y(i,itt)) &
+ & -2.0*dy(i,itt)-dy(i+1,itt)+d*(dy(i,itt)+dy(i+1,itt) &
+ & +2.0*(y(i,itt)-y(i+1,itt)))))
+ end if
+ else
+ akl=log(ak)
+ d=(akl-akminl)/dk+1
+ i=d
+ d=d-i
+ if (i.lt.1) then
+ if (iwarn1.eq.0) then
+ iwarn1=1
+ write(*,*) 'Warning: extrapolating k below kmin of linger.dat'
+ write(*,*) ' ak,akmin=',ak,exp(akminl)
+ end if
+ t1=y(1,itt-1)
+ t2=y(1,itt)
+ else if (i.ge.nk) then
+ if (iwarn2.eq.0) then
+ iwarn2=1
+ write(*,*) 'Warning: extrapolating k beyond kmax of linger.dat'
+ write(*,*) ' ak,akmax=',ak,exp(akminl+(nk-1)*dk)
+ end if
+ dltdi=log(y(nk,itt-1)/y(nk-1,itt-1))
+ t1=y(nk,itt-1)*exp(dltdi*(d+i-nk))
+ dltdi=log(y(nk,itt)/y(nk-1,itt))
+ t2=y(nk,itt)*exp(dltdi*(d+i-nk))
+ else
+ t1=y(i,itt-1)+d*(dy(i,itt-1)+d*(3.0*(y(i+1,itt-1)-y(i,itt-1)) &
+ & -2.0*dy(i,itt-1)-dy(i+1,itt-1)+d*(dy(i,itt-1)+dy(i+1,itt-1) &
+ & +2.0*(y(i,itt-1)-y(i+1,itt-1)))))
+ t2=y(i,itt)+d*(dy(i,itt)+d*(3.0*(y(i+1,itt)-y(i,itt)) &
+ & -2.0*dy(i,itt)-dy(i+1,itt)+d*(dy(i,itt)+dy(i+1,itt) &
+ & +2.0*(y(i,itt)-y(i+1,itt)))))
+ end if
+ end if
+ t=(t1**(1.0-dt))*(t2**dt)
+ ! Apply transfer function to primordial power spectrum.
+ ! Primordial spectrum of psi (or entropy, in the isocurvature case):
+ pcdm=pnorm*ak**(an-4.0)
+ ! Apply transfer function to get density fluctuation spectrum at a.
+ pcdm=pcdm*t*t
+ return
+
+end function pcdm
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+function pbar(ak,a)
+ ! p evaluates the bar power spectrum at wavenumber ak for expansion factor a=1.
+ ! N.B. p is the 3-D spectral density and has units of 1/(ak*ak*ak).
+ ! N.B. ak has units of 1/Mpc, _not_ h/Mpc.
+
+ parameter (nkmax=1000,nt=11)
+ double precision atab(nt)
+ double precision y(nkmax,nt),dy(nkmax,nt),dk,akminl
+ double precision y1(nkmax,nt),dy1(nkmax,nt)
+ double precision y2(nkmax,nt),dy2(nkmax,nt)
+ common /cosmoparms/ omegam,omegav,h0
+ common /pstuff/ atab,an,pnorm,icase,ilog,ntab
+ common /splin2/ y1,dy1,y2,dy2,y,dy,dk,akminl,nk
+ common /scaling/ a00,a10,scale
+ common /extwarn/ iwarn1,iwarn2
+
+ if (ak.le.0.0) then
+ pbar=0.0
+ return
+ end if
+ !**************************************
+ ! Scale-free case.
+ if (icase.eq.3) then
+ pbar=p(ak,a)
+ return
+ else if (icase.eq.2.or.icase.eq.4) then
+ !**************************************
+ ! Transfer function case. The transfer function T(k) is defined so
+ ! that for initial curvature perturbations, phi(k,a=1)=T(k)*psi(k,a=0)
+ ! where psi(k,a=0) has power spectrum pnorm*ak**(an-4) and phi(k,a=1)
+ ! is related to delta (actually, Bardeens gauge-invariant variable
+ ! epsilon_m) by the Poisson equation. For isocurvature initial
+ ! conditions, linger uses the initial entropy perturbation rather than
+ ! psi for normalization, but everything in this subroutine and in pini
+ ! below follows without change.
+ ! Two subcases: BBKS transfer function or tabulated transfer function
+ ! from linger.dat.
+ !**************************************
+ pbar=p(ak,a)
+ return
+ end if
+ ! Use tabulated matter transfer function.
+ ! First the first tabulated value exceeding a.
+ itt=0
+ do it=1,ntab
+ if (itt.eq.0.and.atab(it).gt.a) then
+ itt=it
+ end if
+ end do
+ if (itt.eq.0) itt=ntab
+ if (itt.eq.1) itt=2
+ dt=log(a/atab(itt-1))/log(atab(itt)/atab(itt-1))
+ if (ilog.eq.0) then
+ d=ak/dk
+ i=d
+ d=d-i
+ if (i.lt.1) then
+ if (iwarn1.eq.0) then
+ iwarn1=1
+ write(*,*) 'Warning: extrapolating k below kmin of linger.dat'
+ write(*,*) ' ak,akmin=',ak,dk
+ end if
+ t1=y(1,itt-1)
+ t2=y(1,itt)
+ else if (i.ge.nk) then
+ if (iwarn2.eq.0) then
+ iwarn2=1
+ write(*,*) 'Warning: extrapolating k beyond kmax of linger.dat'
+ write(*,*) ' ak,akmax=',ak,nk*dk
+ end if
+ dltdlk=log(y(nk,itt-1)/y(nk-1,itt-1))/log(nk/(nk-1.0))
+ dlk=log(ak/(nk*dk))
+ t1=y(nk,itt-1)*exp(dltdlk*dlk)
+ dltdlk=log(y(nk,itt)/y(nk-1,itt))/log(nk/(nk-1.0))
+ dlk=log(ak/(nk*dk))
+ t2=y(nk,itt)*exp(dltdlk*dlk)
+ else
+ t1=y(i,itt-1)+d*(dy(i,itt-1)+d*(3.0*(y(i+1,itt-1)-y(i,itt-1)) &
+ & -2.0*dy(i,itt-1)-dy(i+1,itt-1)+d*(dy(i,itt-1)+dy(i+1,itt-1) &
+ & +2.0*(y(i,itt-1)-y(i+1,itt-1)))))
+ t2=y(i,itt)+d*(dy(i,itt)+d*(3.0*(y(i+1,itt)-y(i,itt)) &
+ & -2.0*dy(i,itt)-dy(i+1,itt)+d*(dy(i,itt)+dy(i+1,itt) &
+ & +2.0*(y(i,itt)-y(i+1,itt)))))
+ end if
+ else
+ akl=log(ak)
+ d=(akl-akminl)/dk+1
+ i=d
+ d=d-i
+ if (i.lt.1) then
+ if (iwarn1.eq.0) then
+ iwarn1=1
+ write(*,*) 'Warning: extrapolating k below kmin of linger.dat'
+ write(*,*) ' ak,akmin=',ak,exp(akminl)
+ end if
+ t1=y(1,itt-1)
+ t2=y(1,itt)
+ else if (i.ge.nk) then
+ if (iwarn2.eq.0) then
+ iwarn2=1
+ write(*,*) 'Warning: extrapolating k beyond kmax of linger.dat'
+ write(*,*) ' ak,akmax=',ak,exp(akminl+(nk-1)*dk)
+ end if
+ dltdi=log(y(nk,itt-1)/y(nk-1,itt-1))
+ t1=y(nk,itt-1)*exp(dltdi*(d+i-nk))
+ dltdi=log(y(nk,itt)/y(nk-1,itt))
+ t2=y(nk,itt)*exp(dltdi*(d+i-nk))
+ else
+ t1=y(i,itt-1)+d*(dy(i,itt-1)+d*(3.0*(y(i+1,itt-1)-y(i,itt-1)) &
+ & -2.0*dy(i,itt-1)-dy(i+1,itt-1)+d*(dy(i,itt-1)+dy(i+1,itt-1) &
+ & +2.0*(y(i,itt-1)-y(i+1,itt-1)))))
+ t2=y(i,itt)+d*(dy(i,itt)+d*(3.0*(y(i+1,itt)-y(i,itt)) &
+ & -2.0*dy(i,itt)-dy(i+1,itt)+d*(dy(i,itt)+dy(i+1,itt) &
+ & +2.0*(y(i,itt)-y(i+1,itt)))))
+ end if
+ end if
+ t=(t1**(1.0-dt))*(t2**dt)
+ ! Apply transfer function to primordial power spectrum.
+ ! Primordial spectrum of psi (or entropy, in the isocurvature case):
+ pbar=pnorm*ak**(an-4.0)
+ ! Apply transfer function to get density fluctuation spectrum at a.
+ pbar=pbar*t*t
+ return
+
+end function pbar
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+subroutine pini
+ ! Pini initializes the power spectrum.
+ !parameter (pi=3.1415926535898d0)
+ double precision, parameter :: pi=3.1415926535898d0
+ double precision, parameter :: fourpi=4.0d0*pi !, twopi=2.0d0*pi
+ character*128 filename
+ parameter (nkmax=1000,nt=11)
+ double precision atab(nt)
+ double precision deltat2(0:nkmax),ddeltat2(0:nkmax)
+ double precision tmat(nkmax,nt),dtmat(nkmax,nt)
+ double precision tcdm(nkmax,nt),dtcdm(nkmax,nt)
+ double precision tbar(nkmax,nt),dtbar(nkmax,nt)
+ double precision rombin,dphid,tcon0,arec,ak,om,ov,ok,uj2
+ double precision dc2,dc2l,dk,akmax,akminl,akmaxl,dk1,akmin1
+ double precision dsig8,grhom,grhog,grhor,grho,adotoa
+ real tcon,dplus
+ real tcmb, anorml
+ integer myid,ierr
+ common /cosmoparms/ omegam,omegav,h0
+ common /cosmoparms2/ omegab,omegahdm,degen_hdm
+ common /pstuff/ atab,an,pnorm,icase,ilog,ntab
+ common /omegas/ om,ov,ok
+ common /phint/ tcon0,ak
+ common /splin1/ deltat2,ddeltat2,dk,akminl
+ common /splin2/ tmat,dtmat,tcdm,dtcdm,tbar,dtbar,dk1,akmin1,nk1
+ common /scaling/ a00,a10,scale
+ common /extwarn/ iwarn1,iwarn2
+ external dphid,dc2,dc2l,dsig8
+ include 'mpif.h'
+
+ call mpi_comm_rank(mpi_comm_world,myid,ierr)
+
+ iwarn1=0
+ iwarn2=0
+ a00=0.0
+ a10=0.0
+ scale=1.0
+
+
+ if (myid==0) then
+ write(*,*) 'Select type of initial power spectrum', &
+ & ' (matter transfer function):'
+ write(*,*) ' 1 for T(k) from linger.dat'
+ write(*,*) ' 2 for T(k) from approx. analytical fit (BBKS)'
+ write(*,*) ' 3 for T(k)=1 (scale-free)'
+ write(*,*) ' 4 for T(k) from approx. analytical fit (E&Hu)'
+ write(*,*) 'Enter case (1,2,3 or 4) now:'
+ read(*,*) icase
+ print*, icase
+ endif
+ call mpi_bcast(icase,1,mpi_integer,0,mpi_comm_world,ierr)
+ if (icase.eq.1) then
+ if (myid==0) then
+ write(*,*) 'Enter linger.dat filename'
+ read(*,'(a)') filename
+ open(11,file=filename,status='old')
+ rewind 11
+ read(11,*) omegab,omegac,omegav,omegan
+ read(11,*) h0,tcmb,yhe,nnur,nnunr,initfl
+ write(*,*) 'Omegab,c,v,n=',omegab,omegac,omegav,omegan
+ write(*,*) 'H0,Tcmb,Y,Nnur,Nnunr,initfl=',h0,tcmb,yhe,nnur, &
+ & nnunr,initfl
+ endif
+ call mpi_bcast(omegab,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(omegac,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(omegav,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(omegan,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(h0,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(tcmb,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(nnur,1,mpi_integer,0,mpi_comm_world,ierr)
+ call mpi_bcast(initfl,1,mpi_integer,0,mpi_comm_world,ierr)
+ omegam=omegab+omegac+omegan
+ om=omegam
+ ov=omegav
+ ok=1.0d0-om-ov
+ ! Energy density constants.
+ grhom=3.3379d-11*h0*h0
+ grhog=1.4952d-13*tcmb**4
+ grhor=3.3957d-14*tcmb**4
+ ! Tcmb in micro-K.
+ tcmb=tcmb*1.e6
+ else if (icase.eq.2.or.icase.eq.3.or.icase.eq.4) then
+ tcmb=2.726e6
+ if (h0.eq.0) then
+ ! These may already have been set through common.
+ if (myid==0) then
+ write(*,*) 'Enter Omega_m, Omega_v, H0 (km/s/Mpc,', &
+ & ' set H0=1 for scale-free case)'
+ read(*,*) omegam,omegav,h0
+ write(*,'(3f15.5)') omegam,omegav,h0
+ endif
+ call mpi_bcast(omegam,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(omegav,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(h0,1,mpi_real,0,mpi_comm_world,ierr)
+
+ if(icase.eq.4) then
+ if (myid==0) then
+ write(*,*) 'Enter Omega_b'
+ read(*,*) omegab
+ write(*,'(f15.5)') omegab
+ end if
+ call mpi_bcast(omegab,1,mpi_real,0,mpi_comm_world,ierr)
+ endif
+ end if
+ if (myid==0) &
+ write(*,'(a,a,3f15.5)')' Initializing power spectrum for Omega_m, ', &
+ & 'Omega_v, H0=',omegam,omegav,h0
+ om=omegam
+ ov=omegav
+ ok=1.0d0-om-ov
+ ntab=1
+ atab(1)=1.0
+ else
+ if (myid==0) write(*,*) 'Illegal choice. Aborting'
+ call mpi_finalize(ierr)
+ stop
+ end if
+
+
+ !
+ if (myid==0) then
+ write(*,*) 'Enter long-wave spectral index n (scale-invariant', &
+ & ' is n=1)'
+ read(*,*) an
+ write(*,'(f15.5)') an
+ endif
+ call mpi_bcast(an,1,mpi_integer,0,mpi_comm_world,ierr)
+ ! an=1
+ !
+ if (myid==0) then
+ write(*,*) 'Enter desired normalization at a=1:'
+ if (icase.eq.1.or.icase.eq.2.or.icase.eq.4) then
+ write(*,*) ' Qrms-ps/micro-K (if > 0) or -sigma_8 (if < 0) = ?'
+ else
+ write(*,*) ' k^3*P(k) at k=pi = ?'
+ end if
+ read(*,*) anorml
+ endif
+ call mpi_bcast(anorml,1,mpi_real,0,mpi_comm_world,ierr)
+
+
+ !
+ !**************************************
+ ! Scale-free case. pnorm is the power at the Nyquist frequency for
+ ! a=1 assuming unit transfer function and dx=1.
+ if (icase.eq.3) then
+ akmax=pi
+ pnorm=anorml/akmax**(3.0+an)
+ return
+ end if
+ !**************************************
+ ! Transfer function case. Normalize by CMB quadrupole.
+ ! Two subcases: BBKS transfer function or linger.dat.
+ ! First, get l=2 CMB transfer function Delta_2(k).
+ !**************************************
+ if (icase.eq.2.or.icase.eq.4) then
+ ! Compute Delta_2(k) using Sachs-Wolfe approximation (including phidot).
+ nk=31
+ akmin=1.e-5
+ akmax=1.e-2
+ ilog=1
+ dk=log(akmax/akmin)/(nk-1)
+ tcon0=tcon(1.0)
+ arec=1.0d0/1200.0d0
+ f0=dplus(1.0,omegam,omegav)
+ frec=dplus(real(arec),omegam,omegav)/arec
+ if (myid==0) then
+ write(*,*) 'Computing Delta_2(k) using Sachs-Wolfe approxmation'
+ write(*,*) 'This may take several minutes.'
+ endif
+ do ik=1,nk
+ ak=akmin*exp((ik-1)*dk)
+ phidotint=rombin(dphid,arec,1.0d0,1.0d-4)
+
+
+
+ ! Assume isentropic initial fluctuations. If they are instead
+ ! entropy, replace uj2/3 by uj2*2.
+ deltat2(ik)=(frec*uj2(ak*2.99793d5/h0,tcon0,ok)/3.0d0 &
+ & +2.0d0*phidotint)/f0
+ ! write(*,'(a4,i4,a2,i4)') 'ik =',ik,' /',nk
+ end do
+ else
+ !**************************************
+ ! Use linger.dat for Delta_2(k) and matter (phi) transfer function.
+ ! N.B. We are assuming that there are exactly nt timesteps saved for each k.
+ ntab=nt
+ do i=1,nkmax
+ do it=1,nt
+ if (myid==0) then
+ read(11,*) ik,ak,a1,tcon1,psi,phi,deltac, &
+ & deltab,deltag,deltar,deltan,thetac,thetab,thetag,thetar,thetan, &
+ & shearg,shearr,shearn,econ
+ endif
+ ! Propagate to other cpus
+ call mpi_bcast(ik,1,mpi_integer,0,mpi_comm_world,ierr)
+ call mpi_bcast(ak,1,mpi_real8,0,mpi_comm_world,ierr)
+ call mpi_bcast(a1,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(phi,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(deltac,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(deltab,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(thetac,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(thetab,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(shearg,1,mpi_real,0,mpi_comm_world,ierr)
+
+
+ if (ik.ne.i) then
+ if (myid==0) write(*,*) &
+ & 'linger.dat is not sorted properly or has ntab.ne.nt!'
+ ! write(*,*) 'sort on first column (sort -n linger.dat)',
+ ! 2 ' and rerun'
+ call mpi_finalize(ierr)
+ stop
+ end if
+ if (i.eq.1) then
+ akmin=ak
+ atab(it)=a1
+ end if
+ ! Use last timestep (probably a=1) to get delta_T/T.
+ if (it.eq.nt) deltat2(ik)=shearg/2.0d0
+ ! Get the matter (phi) transfer function.
+ grho=grhom*(om/a1+ok+ov*a1*a1)+(grhog+nnur*grhor)/(a1*a1)
+ adotoa=sqrt(grho/3.0d0)
+ if (initfl.gt.0) then
+ ! Synchronous gauge. Gauge transformation is given by phi=eta+etatophi.
+ ! What we read in as phi actually is eta. What we read in as thetac
+ ! actually is etatophi.
+ tmat(ik,it)=phi+thetac
+ ! n.b. thetac=0 in our synch. gauge.
+ tcdm(ik,it)=deltac
+ tbar(ik,it)=deltab+3.0d0*adotoa/(ak*ak)*thetab
+ else
+ ! Conformal Newtonian gauge.
+ tmat(ik,it)=phi
+ tcdm(ik,it)=deltac+3.0d0*adotoa/(ak*ak)*thetac
+ tbar(ik,it)=deltab+3.0d0*adotoa/(ak*ak)*thetab
+ end if
+ ! Convert from potential to density transfer function. Note that k^2
+ ! is corrected for an open universe.
+ tpois=-(2.0d0/3.0d0)/om*((ak*2.99793e5/h0)**2+4.0d0*ok)
+ tmat(ik,it)=a1*tpois*tmat(ik,it)
+ ! Correct the photon quadrupole moment to a=1 using the Sachs-Wolfe
+ ! formula (if necessary).
+ if (it.eq.nt.and.abs(a1-1.0).gt.0.01) then
+ if (ik.eq.1) then
+ arec=a1
+ f0=dplus(1.0,omegam,omegav)
+ end if
+ phidotint=rombin(dphid,arec,1.0d0,1.0d-4)
+ deltat2(ik)=deltat2(ik)+2.0d0*phidotint/f0*tmat(ik,it)
+ end if
+ end do
+ end do
+ if (myid==0) close(11)
+ nk=ik
+ akmax=ak
+ if (abs(akmax/nk-akmin).le.1.0e-6) then
+ ! Linear steps in k.
+ ilog=0
+ dk=akmax/nk
+ else
+ ! Logarithmic steps in k.
+ ilog=1
+ dk=log(akmax/akmin)/(nk-1)
+ end if
+ end if
+ dk1=dk
+ nk1=nk
+ !**************************************
+ ! Now integrate anisotropy to normalize by Qrms-ps.
+ call splini
+ if (ilog.eq.0) then
+ deltat2(0)=0.0d0
+ call splder(deltat2,ddeltat2,nk+1)
+ qq=5.0d0*fourpi*rombin(dc2,0.0d0,akmax,1.0d-7)
+ else
+ call splder(deltat2(1),ddeltat2(1),nk)
+ akminl=log(akmin)
+ akmin1=akminl
+ akmaxl=log(akmax)
+ qq=5.0d0*fourpi*rombin(dc2l,log(1.0d-6),akmaxl,1.0d-7)
+ end if
+ !**************************************
+ ! pnorm is the primeval amplitude defined by P_psi=pnorm*ak**(an-4)
+ ! in the isentropic case. For isocurvature initial conditions,
+ ! replace P_psi by the power spectrum of primeval entropy perturbations.
+ akmax=h0/8.0
+ do it=1,ntab
+ call splder(tmat(1,it),dtmat(1,it),nk)
+ call splder(tcdm(1,it),dtcdm(1,it),nk)
+ call splder(tbar(1,it),dtbar(1,it),nk)
+ end do
+ if (anorml.gt.0.0) then
+ !**************************************
+ ! anorml is Qrms-ps in micro-K. Compute corresponding sigma8.
+ pnorm=(anorml/tcmb)**2/qq
+ ! Now integrate density fluctuation to get sigma8.
+ sig0=fourpi*rombin(dsig8,0.0d0,akmax,1.0d-7)
+ sigma8=sqrt(sig0)
+ if (myid==0) write(*,*) 'Linear sigma8=',sigma8
+ else
+ !**************************************
+ ! anorml is -sigma8, the rms linear density fluctuation in a sphere of
+ ! radius 8/h Mpc. Compute corresponding Qrms-ps.
+ sigma8=-anorml
+ pnorm=1.0
+ sig0=fourpi*rombin(dsig8,0.0d0,akmax,1.0d-7)
+ pnorm=sigma8**2/sig0
+ qrmsps=tcmb*sqrt(pnorm*qq)
+ if (myid==0) write(*,'(a,f15.4)') 'Qrms-ps/micro-K=',qrmsps
+ end if
+
+ if (myid==0) then
+ write(*,*)
+ write(*,*) 'I can write the power spectrum of delta_rho/rho', &
+ & ' to disk (power.dat).'
+ write(*,*) 'If you would like this, please enter kmin and', &
+ & ' kmax (1/Mpc)'
+ write(*,*) 'Enter 0,0 if you don''t want the power spectrum', &
+ & ' written to a file'
+ read(*,*) ak1,ak2
+ write(*,'(2es15.5)') ak1,ak2
+ endif
+
+ call mpi_bcast(ak1,1,mpi_real,0,mpi_comm_world,ierr)
+ call mpi_bcast(ak2,1,mpi_real,0,mpi_comm_world,ierr)
+
+ if (ak1.le.0.0.or.ak2.le.0.0) return
+ nkplot=201
+ dlkp=log(ak2/ak1)/(nkplot-1)
+
+ if (myid==0) then
+ open(11,file='power.dat',form='formatted',status='unknown')
+ rewind 11
+ write(11,*) an,anorml
+ do i=1,nkplot
+ ak0=ak1*exp((i-1)*dlkp)
+ write(11,*) ak0/(h0/100.0),p(ak0,1.0)*(h0/100.0)**3, &
+ & fourpi*ak0*ak0*ak0*p(ak0,1.0)
+ end do
+ close(11)
+ endif
+
+ return
+end subroutine pini
+
+!ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+function dc2(ak)
+ implicit double precision (a-h,o-z)
+ parameter (nkmax=1000,nt=11)
+ double precision y(0:nkmax),dy(0:nkmax),atab(nt)
+ common /splin1/ y,dy,dk,akminl
+ real an,pnorm
+ common /pstuff/ atab,an,pnorm,icase,ilog,ntab
+
+ if (ak.eq.0.0d0) then
+ dc2=0.0d0
+ return
+ end if
+
+ d=ak/dk
+ i=d
+ d=d-i
+
+ delt2=y(i)+d*(dy(i)+d*(3.0*(y(i+1)-y(i))-2.0*dy(i) &
+ & -dy(i+1)+d*(dy(i)+dy(i+1)+2.0*(y(i)-y(i+1)))))
+
+ dc2=delt2*delt2*ak**(an-2.0d0)
+
+ return
+end function dc2
+!ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+function dc2l(akl)
+ implicit double precision (a-h,o-z)
+ parameter (nkmax=1000,nt=11)
+ double precision y(0:nkmax),dy(0:nkmax),atab(nt)
+ common /splin1/ y,dy,dkl,akminl
+ real an,pnorm
+ common /pstuff/ atab,an,pnorm,icase,ilog,ntab
+
+ ak=exp(akl)
+
+ d=(akl-akminl)/dkl+1
+ i=d
+ d=d-i
+
+ if (i.lt.1) then
+ delt2=y(1)*(ak/exp(akminl))**2
+ else
+ delt2=y(i)+d*(dy(i)+d*(3.0*(y(i+1)-y(i))-2.0*dy(i) &
+ & -dy(i+1)+d*(dy(i)+dy(i+1)+2.0*(y(i)-y(i+1)))))
+ end if
+
+ dc2l=delt2*delt2*ak**(an-1.0d0)
+
+ return
+end function dc2l
+!ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+function dphid(a)
+ implicit double precision (a-h,o-z)
+ real tcon,dplus,fomega,omegam,omegav,h0
+ common /cosmoparms/ omegam,omegav,h0
+ common /phint/ tcon0,ak
+
+ ok=1.0d0-omegam-omegav
+ r=tcon0-tcon(real(a))
+ dphid=dplus(real(a),omegam,omegav)/(a*a) &
+ & *(fomega(real(a),omegam,omegav)-1.0d0) &
+ & *uj2(ak*2.99793d5/h0,r,ok)
+ return
+end function dphid
+!ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+function tcon(a)
+ ! Evaluate H0*conformal time for FLRW cosmology.
+ ! Assume Omegas passed in common to dtconda.
+ real tcon,a
+ double precision b,rombint,dtconda
+ external dtconda
+
+ b=sqrt(a)
+ tcon=rombint(dtconda,0.0d0,b,1.0d-8)
+ return
+end function tcon
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+function dtconda(b)
+ ! Omegam := Omega today (a=1) in matter.
+ ! Omegav := Omega today (a=1) in vacuum energy.
+ ! Omegak := Omega today (a=1) in curvature, Omegak := 1-Omegam-Omegav.
+ implicit double precision (a-h,o-z)
+ common /omegas/ omegam,omegav,omegak
+
+ a=b*b
+ etab=sqrt(omegam+omegav*a*a*a+omegak*a)
+ dtconda=2.0d0/etab
+ return
+end function dtconda
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+function dsig8(ak)
+ ! This function calculates the integrand for the normalization of the
+ ! power spectrum with Delta = 1 at r = 8 Mpc/h.
+
+ double precision dsig8,ak,x,w
+ common /cosmoparms/ omegam,omegav,h0
+
+ if (ak.le.0.0d0) then
+ dsig8=0.0d0
+ return
+ end if
+ ! Window function for spherical tophat of radius 8 Mpc/h.
+ x=ak*800.0/h0
+ w=3.0*(sin(x)-x*cos(x))/(x*x*x)
+ dsig8=ak*ak*p(real(ak),1.0)*w*w
+ return
+end function dsig8
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+function uj2(ak,chi,omegak)
+ ! Evaluate the ultra spherical Bessel function j_2(k,chi,omegak), the
+ ! generalization of spherical Bessel function to a constant curvature
+ ! 3-space. Must have ak in units of H0/c and chi in units of c/H0.
+
+ ! This routine assumes an open or flat universe with omegak >= 0.
+ ! While it is easy to evalulate uj2 for a closed universe, this also
+ ! requires replacing integrals over k by sums over k.
+ !
+ implicit double precision (a-h,o-z)
+
+ if (omegak.lt.-1.0d-6) then
+ write(*,*) 'Closed universe prohibited in uj2!'
+ write(*,*) 'omegak=',omegak
+ stop
+ else if (omegak.le.1.0d-6) then
+ uj2=aj2(ak*chi)
+ else
+ rc=1.0d0/sqrt(omegak)
+ uj2=bj2(ak*rc,chi/rc)
+ end if
+
+ return
+end function uj2
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+! Evaluate the spherical bessel function j_2(x).
+function aj2(x)
+
+ implicit double precision (a-h,o-z)
+ parameter (tol=1.0d-16)
+
+ xa=abs(x)
+ xx=x*x
+ if (xa.lt.1.0d-3) then
+ aj0=1.0d0-xx/6.0d0*(1.0d0-xx/20.0d0*(1.0d0-xx/42.0d0 &
+ & *(1.0d0-xx/72.0d0)))
+ aj1=(x/3.0d0)*(1.0d0-xx/10.0d0*(1.0d0-xx/28.0d0 &
+ & *(1.0d0-xx/54.0d0)))
+ else
+ aj0=sin(x)/x
+ aj1=(sin(x)-x*cos(x))/xx
+ end if
+
+ ! Use power series expansion for small argument.
+ x2=-0.25d0*xx
+ if (-x2.lt.0.5d0.or.xa.lt.1.5d0) then
+ fact=xx/15.0d0
+ sum=1.0d0
+ term=1.0d0
+ n=0
+7 n=n+1
+ term=term*x2/(n*(n+2.5d0))
+ sum=sum+term
+ if (n.lt.10.or.abs(term).gt.tol) go to 7
+ if (abs(sum).lt.1.0d-6) then
+ write(*,*) 'aj2** x,sum=',x,sum
+ go to 9
+ end if
+ aj2=fact*sum
+ return
+ end if
+ ! Use recurrence relation to get aj2.
+9 continue
+ aj2=3.0d0*aj1/x-aj0
+
+ return
+end function aj2
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+! Evaluate the ultra spherical bessel function j_2(k,chi).
+function bj2(ak,chi)
+ ! This is the generalization of the spherical Bessel function to a pseudo
+ ! 3-sphere (a 3-space of constant negative curvature). Must have the radial
+ ! wavenumber k and coordinate chi be in units of the curvature distance,
+ ! sqrt(-1/K).
+ !
+ implicit double precision (a-h,o-z)
+ parameter (tol=1.0d-10)
+
+ if (ak.lt.0.d0.or.chi.lt.0.d0) then
+ write(*,*) 'Negative ak, chi prohibited in bj2!'
+ stop
+ end if
+
+ akk=ak*ak
+ ak1=sqrt(1.0d0+akk)
+ if (chi.gt.100.0d0) then
+ write(*,*) 'r/Rcurv is too large in bj2'
+ stop
+ end if
+ e=exp(chi)
+ ei=1.0d0/e
+ ch=0.5d0*(e+ei)
+ sh=0.5d0*(e-ei)
+ ch2=0.5d0*(1.0d0+ch)
+ x2=0.5d0*(1.0d0-ch)
+ chi2=chi*chi
+ if (sh.lt.1.0d-3) then
+ sh=chi*(1.0d0+chi2/6.0d0*(1.0d0+chi2/20.0d0*(1.0d0+chi2/42.0d0 &
+ & *(1.0d0+chi2/72.0d0))))
+ x2=-0.25d0*chi2*(1.0d0+chi2/12.0d0*(1.0d0+chi2/30.0d0*(1.0d0+ &
+ & chi2/56.0d0*(1.0d0+chi2/90.0d0))))
+ end if
+ if (sh.ne.0.0d0) cth=ch/sh
+ cn=cos(ak*chi)
+ sn=sin(ak*chi)
+ if (sh.eq.0.0d0) then
+ uj0=1.0d0
+ ujl1=0.0d0
+ else if (ak.eq.0.0d0) then
+ uj0=chi/sh
+ uj1=(chi*ch-sh)/(sh*sh)
+ else
+ uj0=sn/(ak*sh)
+ uj1=(sn*ch-ak*sh*cn)/(ak*ak1*sh*sh)
+ end if
+
+ if (-x2.lt.0.5d0.and.ak*chi.lt.2) then
+ ! Use hypergeometric series expansion for small argument.
+ fact=sh*ak1/(3.0d0*ch2*sqrt(ch2))
+ ak2=sqrt(akk+4.0d0)
+ fact=fact*sh*ak2/(5.0d0*ch2)
+ sum=1.0d0
+ term=1.0d0
+ n=0
+10 n=n+1
+ hn=n-0.5d0
+ term=term*x2*(akk+hn*hn)/(n*(hn+3))
+ sum=sum+term
+ if (n.lt.5.or.abs(term).gt.tol) go to 10
+ uj2=fact*sum
+
+ else
+ ! Use recurrence relation to get uj2.
+ if (sh.eq.0.0d0) then
+ uj2=0.0d0
+ else
+ ak2=sqrt(akk+4.0d0)
+ uj2=(3.0d0*cth*uj1-ak1*uj0)/ak2
+ end if
+
+ end if
+ bj2=uj2
+
+ return
+end function bj2
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+function rombin(f,a,b,tol)
+ ! Rombint returns the integral from a to b of f(x)dx using Romberg integration.
+ ! The method converges provided that f(x) is continuous in (a,b). The function
+ ! f must be double precision and must be declared external in the calling
+ ! routine. tol indicates the desired relative accuracy in the integral.
+
+ parameter (MAXITER=20,MAXJ=5)
+ implicit double precision (a-h,o-z)
+ dimension g(MAXJ+1)
+ external f
+
+ h=0.5d0*(b-a)
+ gmax=h*(f(a)+f(b))
+ g(1)=gmax
+ nint=1
+ error=1.0d20
+ i=0
+10 i=i+1
+ if (i.gt.MAXITER.or.(i.gt.9.and.abs(error).lt.tol)) &
+ & go to 40
+ ! Calculate next trapezoidal rule approximation to integral.
+ g0=0.0d0
+ do 20 k=1,nint
+ g0=g0+f(a+(k+k-1)*h)
+20 continue
+ g0=0.5d0*g(1)+h*g0
+ h=0.5d0*h
+ nint=nint+nint
+ jmax=min(i,MAXJ)
+ fourj=1.0d0
+ do 30 j=1,jmax
+ ! Use Richardson extrapolation.
+ fourj=4.0d0*fourj
+ g1=g0+(g0-g(j))/(fourj-1.0d0)
+ g(j)=g0
+ g0=g1
+30 continue
+ if (abs(g0).gt.tol) then
+ error=1.0d0-gmax/g0
+ else
+ error=gmax
+ end if
+ gmax=g0
+ g(jmax+1)=g0
+ go to 10
+40 rombin=g0
+ if (i.gt.MAXITER.and.abs(error).gt.tol) &
+ & write(*,*) 'Rombint failed to converge; integral, error=', &
+ & rombin,error
+ return
+ end function rombin
+ !ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ ! HERE STARTS THE $&%*§è BARYONIC PHYSICS
+ !ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+
+
+ !ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ real function TFmdm_onek_mpc(k,omhh,f_baryon)
+
+ ! Calculate transfer function
+ !
+ ! Input:
+ ! k -- wavenumber in Mpc^{-1}
+ ! omhh -- The density of CDM and baryons, in units of critical dens,
+ ! multiplied by the square of the Hubble constant, in units
+ ! of 100 km/s/Mpc */
+ ! f_baryon -- The fraction of baryons to CDM */
+ !
+ ! Output:
+ ! tf_full -- The full fitting formula, eq. (16), for the matter
+ ! transfer function.
+ ! tf_baryon -- The baryonic piece of the full fitting formula, eq. 21.
+ ! tf_cdm -- The CDM piece of the full fitting formula, eq. 17.
+ !
+ ! Tcmb -- The temperature of the CMB in Kelvin, 2.728(4) is COBE and is
+ ! the default reached by inputing Tcmb=0 -- reset on output. */
+ !
+ ! theta_cmb, /* Tcmb in units of 2.7 K */
+ ! z_equality, /* Redshift of matter-radiation equality, really 1+z */
+ ! k_equality, /* Scale of equality, in Mpc^-1 */
+ ! z_drag, /* Redshift of drag epoch */
+ ! R_drag, /* Photon-baryon ratio at drag epoch */
+ ! R_equality, /* Photon-baryon ratio at equality epoch */
+ ! sound_horizon, /* Sound horizon at drag epoch, in Mpc */
+ ! k_silk, /* Silk damping scale, in Mpc^-1 */
+ ! alpha_c, /* CDM suppression */
+ ! beta_c, /* CDM log shift */
+ ! alpha_b, /* Baryon suppression */
+ ! beta_b, /* Baryon envelope shift */
+
+ implicit none
+
+
+ real y,omhh,obhh,Tcmb,s_tilde,TF_pressureless
+
+ real k,tf_full,tf_baryon,tf_cdm,q,ks
+ real theta_cmb,z_equality,k_equality,z_drag,R_drag,R_equality, &
+ & sound_horizon,k_silk,alpha_c,beta_c,alpha_b,beta_b, &
+ & f_baryon,beta_node
+
+
+
+ if (f_baryon.le.0) f_baryon=1.e-5
+
+ ! Ugly hack to initialize Tcmb...
+ Tcmb=0.0
+
+ if (Tcmb.le.0) Tcmb=2.728
+ if (omhh.le.0.0) then
+ write(*,*) 'TFset_parameters(): Illegal input'
+ stop
+ end if
+
+
+ ! Auxiliary variables
+ obhh = omhh*f_baryon
+ theta_cmb = Tcmb/2.7
+
+ ! Main variables
+ z_equality = 2.50e4*omhh*theta_cmb**(-4.) - 1.D0
+ k_equality = 0.0746*omhh*theta_cmb**(-2.)
+
+ z_drag = 0.313*omhh**(-0.419)*(1.+0.607*omhh**(0.674))
+ z_drag = 1e0 + z_drag*obhh**(0.238*omhh**(0.223))
+ z_drag = 1291e0 * omhh**(0.251)/ &
+ & (1e0 + 0.659*omhh**(0.828)) * z_drag
+
+ R_drag = 31.5*obhh*theta_cmb**(-4.)*1000e0/(1e0 + z_drag)
+ R_equality = 31.5*obhh*theta_cmb**(-4.) &
+ & *1000e0/(1e0 + z_equality)
+
+ sound_horizon = 2./3./k_equality*sqrt(6./R_equality)* &
+ & log(( sqrt(1.+R_drag)+sqrt(R_drag+R_equality) ) &
+ & /(1.+sqrt(R_equality)))
+
+ k_silk = 1.6*obhh**(0.52)*omhh**(0.73)* &
+ & (1e0 + (10.4*omhh)**(-0.95))
+
+ alpha_c = ((46.9*omhh)**(0.670)*(1e0+(32.1*omhh)**(-0.532)))
+ alpha_c = alpha_c**(-f_baryon)
+ alpha_c = alpha_c*((12.0*omhh)**(0.424)*(1e0 + &
+ & (45.0*omhh)**(-0.582)))**(-f_baryon**3.)
+
+
+ beta_c = 0.944/(1+(458.*omhh)**(-0.708))
+ beta_c = 1.+beta_c*((1.-f_baryon)**((0.395*omhh)**(-0.0266)) &
+ & - 1e0)
+ beta_c = 1./beta_c
+
+ y = (1e0+z_equality)/(1e0+z_drag)
+ alpha_b = y*(-6.*sqrt(1.+y)+(2.+3.*y)*log((sqrt(1.+y)+1.) &
+ & /(sqrt(1.+y)-1.)))
+ alpha_b = 2.07*k_equality*sound_horizon* &
+ & (1.+R_drag)**(-0.75)*alpha_b
+
+
+ beta_b = 0.5+f_baryon+(3.-2.*f_baryon)* &
+ & sqrt((17.2*omhh)**2.+1e0)
+
+ beta_node = 8.41*omhh**(0.435)
+
+ if (k.le.0) then
+ write(*,*) 'TFtransfer_function(): Illegal k'
+ stop
+ end if
+
+
+ ! Auxiliary Variables
+
+ q = k/13.41/k_equality
+ ks = k*sound_horizon
+
+ ! Main Variables
+
+ tf_cdm = 1./(1.+(ks/5.4)**4.)
+ tf_cdm = tf_cdm*TF_pressureless(q,1.,beta_c) + &
+ & (1.-tf_cdm)*TF_pressureless(q,alpha_c,beta_c)
+
+
+ s_tilde = sound_horizon/(1.+(beta_node/ks)**3.)**(1./3.)
+ tf_baryon = TF_pressureless(q,1.,1.)/(1.+(ks/5.2)**2.)
+ tf_baryon = tf_baryon + alpha_b/(1.+(beta_b/ks)**3) &
+ & *exp(-(k/k_silk)**(1.4))
+ tf_baryon = tf_baryon *(sin(k*s_tilde)/(k*s_tilde))
+ tf_full = f_baryon*tf_baryon + (1-f_baryon)*tf_cdm
+
+ TFmdm_onek_mpc=tf_full;
+
+
+ return
+ end function TFmdm_onek_mpc
+
+ !ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+
+ ! auxiliary function: Pressureless TF
+
+ real function TF_pressureless(q,a,b)
+
+ real q,a,b
+
+ TF_pressureless = Log(exp(1.)+1.8*b*q)
+ TF_pressureless = TF_pressureless/(TF_pressureless + &
+ & (14.2/a + 386/(1.+69.9*q**1.08))*q**2)
+
+ return
+
+ end function TF_pressureless
+
+
+ !ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
--- /dev/null
+/***************************************************************************
+ * Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al *
+ * prunet iap.fr *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA *
+ * or see https://www.gnu.org/licenses/licenses.html#GPL . *
+ **************************************************************************/
+
+#define _XOPEN_SOURCE 500
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <stdint.h>
+//#include <mpi.h>
+//#define OFFSET_MAX 274877906944 // 4*4096^3
+#define OFFSET_MAX 2199023255552 // 4*8192^3
+int parallel_write(char*,int64_t,int64_t,void*);
+int parallel_read(char*,int64_t,int64_t,void*);
+#if defined ADD0US
+void f77_parallel_read(char*,int32_t*,int64_t*,int64_t*,void*);
+void f77_parallel_write(char*,int32_t*,int64_t*,int64_t*,void*);
+#elif defined ADD2US
+void f77_parallel_read__(char*,int32_t*,int64_t*,int64_t*,void*);
+void f77_parallel_write__(char*,int32_t*,int64_t*,int64_t*,void*);
+#else
+void f77_parallel_read_(char*,int32_t*,int64_t*,int64_t*,void*);
+void f77_parallel_write_(char*,int32_t*,int64_t*,int64_t*,void*);
+#endif
+
+// This routine writes size bytes of buffer at position offset
+// in the file filename.
+// Can be used in multiple concurrent access
+
+int parallel_write(char *filename, int64_t size, int64_t offset, void *buffer) {
+
+
+ int fd; //file descriptor
+ int stat; // I/O status
+ if (size + offset > OFFSET_MAX) {
+ fprintf(stderr,"You are trying to access a file location\n");
+ fprintf(stderr,"which is bigger than %ld\n",(int64_t)OFFSET_MAX);
+ fprintf(stderr,"Verify your code and/or change OFFSET_MAX\n");
+ return(1);
+ }
+ fd = open(filename,O_RDWR|O_CREAT,S_IRUSR|S_IWUSR);
+ stat=pwrite(fd,buffer,size,offset);
+ close(fd);
+ if (stat != size) return(1);
+ else return(0);
+}
+
+// This routine reads size bytes of buffer at position offset
+// in the file filename.
+// Can be used in multiple concurrent access
+
+int parallel_read(char *filename, int64_t size, int64_t offset, void *buffer) {
+
+ int fd; //file descriptor
+ int stat; // I/O status
+ if (size + offset > OFFSET_MAX) {
+ fprintf(stderr,"You are trying to access a file location\n");
+ fprintf(stderr,"which is bigger than %ld\n",(int64_t)OFFSET_MAX);
+ fprintf(stderr,"Verify your code and/or change OFFSET_MAX\n");
+ return(1);
+ }
+ fd = open(filename,O_RDONLY);
+ stat = pread(fd,buffer,size,offset);
+ close(fd);
+ if (stat != size) return(1);
+ else return(0);
+}
+
+// Fortran wrappers
+
+#if defined ADD0US
+void f77_parallel_read(char *filename, int32_t *fnamelen, int64_t *size,
+ int64_t *offset, void *buffer) {
+#elif defined ADD2US
+void f77_parallel_read__(char *filename, int32_t *fnamelen, int64_t *size,
+ int64_t *offset, void *buffer) {
+#else
+void f77_parallel_read_(char *filename, int32_t *fnamelen, int64_t *size,
+ int64_t *offset, void *buffer) {
+#endif
+ int stat;
+ filename[*fnamelen]='\0';
+ stat = parallel_read(filename,*size,*offset,buffer);
+ if (stat !=0) fprintf(stderr,"Failure to read with parallel_read\n");
+}
+
+#if defined ADD0US
+void f77_parallel_write(char *filename, int32_t *fnamelen, int64_t *size,
+ int64_t *offset, void *buffer) {
+#elif defined ADD2US
+void f77_parallel_write__(char *filename, int32_t *fnamelen, int64_t *size,
+ int64_t *offset, void *buffer) {
+#else
+void f77_parallel_write_(char *filename, int32_t *fnamelen, int64_t *size,
+ int64_t *offset, void *buffer) {
+#endif
+ int stat;
+ filename[*fnamelen]='\0';
+ stat = parallel_write(filename,*size,*offset,buffer);
+ if (stat !=0) fprintf(stderr,"Failure to write with parallel_read\n");
+}
+
+
+
+///
+/*
+TMP_main(int argc, char **argv) {
+
+ int fd;
+ char filename[128];
+ long nsize, noffset;
+ float *buffer;
+ int i, stat;
+ int myid, nproc;
+
+ MPI_Init(&argc,&argv);
+ MPI_Comm_size(MPI_COMM_WORLD,&nproc);
+ MPI_Comm_rank(MPI_COMM_WORLD,&myid);
+
+ if (argc != 3 && myid==0) {
+ fprintf(stderr,"io filename nsize\n");
+ MPI_Finalize();
+ exit(1);
+ }
+
+
+ strcpy(filename,argv[1]);
+ nsize=atoi(argv[2]); // number of floats to read/write
+ // noffset=atoi(argv[3]); // offset in sizeof(float)
+ noffset=myid*nsize;
+
+
+ fd = open(filename,O_RDWR|O_CREAT,S_IRUSR|S_IWUSR);
+ buffer = (float*)malloc(nsize*sizeof(float));
+ for (i=0;i<nsize;i++) buffer[i] = (float)(i+nsize*myid);
+ stat=pwrite(fd,(void*)buffer,nsize*sizeof(float),noffset*sizeof(float));
+ close(fd);
+ fprintf(stderr,"coucou from proc # %d: stat = %d\n",myid,stat);
+ MPI_Barrier(MPI_COMM_WORLD);
+ return;
+
+
+
+ fd = open(filename,O_RDONLY);
+ buffer = (float*)malloc(nsize*sizeof(float));
+ stat=pread(fd,(void*)buffer,nsize*sizeof(float),noffset*sizeof(float));
+ for (i=0;i<nsize;i++) fprintf(stderr,"%d %f\n",i+nsize*myid,buffer[i]);
+ close(fd);
+ return;
+
+ MPI_Finalize();
+
+}
+*/
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al !
+! prunet iap.fr !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+module paste
+
+ use grafic_types
+ use grafic_io
+ !use derivative, only: init_kgrid,kx,ky,kz
+ implicit none
+
+contains
+
+ subroutine grid_paste(local_z_start,local_nz,head_taille,head_cosmo,buffer,small_file_name)
+
+ !Arguments
+ integer, intent(in) :: local_z_start,local_nz
+ type(cosmo), intent(in) :: head_cosmo
+ type(taille), intent(in) :: head_taille
+#ifdef DOUB
+ real(dp), dimension(:), intent(inout) :: buffer
+#else
+ real(sp), dimension(:), intent(inout) :: buffer
+#endif
+ character(len=128), intent(in) :: small_file_name
+
+ ! Local variables
+ type(cosmo) :: small_head_cosmo
+ type(taille) :: small_head_taille
+ integer :: nx, nxs, ny, nys, nz, nzs, n2x, n2xs
+ real(dp) :: dx, dxs
+ integer :: ierr !myid
+ logical :: debut=.false., fin=.false.
+ integer :: local_nzs, local_z_starts, local_z_start_end
+ integer :: i,j,k,kk
+ integer(i8b) :: index_big, index_small
+
+#ifdef DOUB
+ real(dp), dimension(:), allocatable :: sbuffer
+#else
+ real(sp), dimension(:), allocatable :: sbuffer
+#endif
+
+ ! Read small file header, and verify its compliance with big cube header
+ call grafic_read_header(small_file_name,small_head_taille,small_head_cosmo)
+ nx=head_taille%nx
+ ny=head_taille%ny
+ nz=head_taille%nz
+ dx=head_taille%dx
+ nxs=small_head_taille%nx
+ nys=small_head_taille%ny
+ nzs=small_head_taille%nz
+ dxs=small_head_taille%dx
+
+ n2x=2*(nx/2+1)
+ n2xs=2*(nxs/2+1)
+
+ call mpi_barrier(MPI_COMM_WORLD,ierr)
+
+!!$ call mpi_comm_rank(MPI_COMM_WORLD,myid,ierr)
+!!$ if (nxs > nx .or. nys > ny .or. nzs > nz) then
+!!$ if (myid==0) print*,'Wrong box sizes, aborting'
+!!$ call mpi_finalize(ierr)
+!!$ stop
+!!$ endif
+!!$
+!!$ if (nx*dx /= nxs*dxs) then
+!!$ if (myid==0) print*,'Incompatible physical box sizes, aborting'
+!!$ call mpi_finalize(ierr)
+!!$ stop
+!!$ endif
+!!$
+!!$ if (head_cosmo%astart/=small_head_cosmo%astart .or. &
+!!$ & head_cosmo%omegam/=small_head_cosmo%omegam .or. &
+!!$ & head_cosmo%omegav/=small_head_cosmo%omegav .or. &
+!!$ & head_cosmo%h0/=small_head_cosmo%h0) then
+!!$ if (myid==0) print*,'Incompatible cosmological parameters, aborting'
+!!$ call mpi_finalize(ierr)
+!!$ stop
+!!$ endif
+
+ ! verify that modes need to be pasted
+ ! debut is .true. if positive kz modes need padding
+ ! fin is .true. if negative kz modes need padding
+ ! Beware that all values of the pair (debut,fin) can happen ...
+ ! The pasting policy is to get rid of all Nyquist planes in the small
+ ! box, and retain the corresponding (non-Nyquist) frequencies (positive
+ ! and negative) of the large box.
+
+ ! First element is a positive (small) kx frequency (Nyquist excluded)
+ if (local_z_start <= nzs/2-1) debut=.true.
+ ! Last element is a negative (small) kx frequency
+ if (local_z_start+local_nz-1 >= nz-nzs/2+1) fin=.true.
+
+ if (debut) then
+ local_nzs = min(local_z_start+local_nz,nzs/2)-local_z_start
+ local_z_starts = local_z_start
+ allocate(sbuffer(local_nzs*nys*n2xs))
+ ! Read small k grid. This avoids complicated communication ...
+ call grafic_read(sbuffer,local_nzs,local_z_starts,nys,nxs, &
+ & small_file_name,padding_in=.true.)
+ ! Fill "debut": positive kx frequency modes
+ do k=1,local_nzs
+ ! Fill positive ky frequency modes, including ky=0, skipping nyq_y
+ do j=1,nys/2
+ do i=1,n2xs-2 ! Skip nyq_z
+ index_big = int((k-1)*ny+j-1,8)*n2x+i
+ index_small = ((k-1)*nys+j-1)*n2xs+i
+ buffer(index_big)=sbuffer(index_small)
+ enddo
+ enddo
+ ! Now fill negative ky frequency modes
+ do j=nys/2+2,nys
+ do i=1,n2xs-2
+ index_big = int((k-1)*ny+j+ny-nys-1,8)*n2x+i
+ index_small = ((k-1)*nys+j-1)*n2xs+i
+ buffer(index_big)=sbuffer(index_small)
+ enddo
+ enddo
+ enddo
+ deallocate(sbuffer)
+ endif
+
+ if (fin) then
+ local_z_start_end = max(local_z_start,nz-nzs/2+1)
+ local_z_starts = local_z_start_end-nz+nzs ! Small cube index
+ local_nzs = local_nz - (local_z_start_end - local_z_start)
+
+ allocate(sbuffer(local_nzs*nys*n2xs))
+ call grafic_read(sbuffer,local_nzs,local_z_starts,nys,nxs, &
+ & small_file_name,padding_in=.true.)
+ ! Fill "fin": negative kx frequency modes
+ do k=1,local_nzs
+ kk = k+local_z_start_end-local_z_start
+ ! Fill positive ky frequency modes, including ky=0, skipping nyq_y
+ do j=1,nys/2
+ do i=1,n2xs-2 ! Skip nyq_z
+ index_big = int((kk-1)*ny+j-1,8)*n2x+i
+ index_small = ((k-1)*nys+j-1)*n2xs+i
+ buffer(index_big)=sbuffer(index_small)
+ enddo
+ enddo
+ ! Fill negative ky frequency modes
+ do j=nys/2+2,nys
+ do i=1,n2xs-2
+ index_big = int((kk-1)*ny+j+ny-nys-1,8)*n2x+i
+ index_small = ((k-1)*nys+j-1)*n2xs+i
+ buffer(index_big)=sbuffer(index_small)
+ enddo
+ enddo
+ enddo
+ deallocate(sbuffer)
+ endif
+
+
+ end subroutine grid_paste
+
+end module paste
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al !
+! prunet iap.fr !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+!=======================================================================
+!
+! P A R A L L E L R A N D O M N U M B E R G E N E R A T O R
+!
+!=======================================================================
+! Here's how to use these functions:
+! Initialization: call Rans( N, StartVal, Seeds )
+! This returns an array of M seeds, where M = N if N is odd, or N+1
+! otherwise; the returned seeds have values that partition the basic
+! ranf cycle of 2**46 pseudorandom reals in [0,1] into independent sub-
+! sequences. The second argument, StartVal, can be a cycle-starting seed
+! for the full-period generator; if it is zero, a special seed will be
+! used that produces statistically desirable behavior.
+! Use: call Ranf( Seed, RandNum )
+! This returns a pseudorandom real and a seed to be passed back in the
+! next invocation. The returned seed carries the state normally hidden
+! in imperative generators.
+!=======================================================================
+
+!TODO: (kind=8) is not portable - replace this by a portable version
+
+#include "../config.h"
+
+module random
+ use iso_C_binding
+
+ integer(c_long),parameter :: MaxParallelism = 65536 !!! TO BE INCREASED IF NEEDED!
+ integer(c_long),parameter :: MaxRandNumStreams = MaxParallelism
+ integer,parameter :: IRandNumSize = 4, IBinarySize = 48
+ integer,parameter :: Mod4096DigitSize = 12
+ !integer,parameter :: IAmountofParallelism = 128
+ integer,parameter :: IZero = 0
+ integer,parameter :: NPoissonLimit = 10
+
+ integer,dimension( IRandNumSize ) :: &
+ & Multiplier = (/373, 3707, 1442, 647/)
+ integer,dimension( IRandNumSize ) :: &
+ & DefaultSeed = (/ 3281, 4041, 595, 2376 /)
+ real(kind=8),dimension( IRandNumSize ) :: &
+ & Divisor = (/281474976710656.0,68719476736.0,16777216.0,4096.0/)
+
+ integer :: IGauss = 0
+ real(kind=8) :: GaussBak = 0.0d0
+
+contains
+ !=======================================================================
+ subroutine ranf( Seed, RandNum )
+ implicit none
+ integer,dimension( IRandNumSize ) :: Seed
+ real(kind=8) :: RandNum
+
+ integer,dimension( IRandNumSize ) :: OutSeed
+
+ RandNum = float( Seed( 4 ) ) / Divisor( 4 ) + &
+ & float( Seed( 3 ) ) / Divisor( 3 ) + &
+ & float( Seed( 2 ) ) / Divisor( 2 ) + &
+ & float( Seed( 1 ) ) / Divisor( 1 )
+
+ call ranfmodmult( Multiplier, Seed, OutSeed )
+
+ Seed = OutSeed
+
+ return
+ end subroutine ranf
+ !=======================================================================
+
+ !=======================================================================
+ subroutine poissdev( Seed, AverNum , PoissNum)
+ implicit none
+ integer,dimension( IRandNumSize ) :: Seed
+ real(kind=8) :: AverNum
+ integer :: PoissNum
+
+ real(kind=8) :: Norm, Repar, Proba
+ real(kind=8) :: RandNum, GaussNum
+
+ if(AverNum <= DBLE(NPoissonLimit)) then
+ Norm=exp(-AverNum)
+ Repar=1.0d0
+ PoissNum=0
+ Proba=1.0d0
+ call ranf(Seed,RandNum)
+ do while(Repar*Norm <= RandNum .and. PoissNum <= 10*NPoissonLimit )
+ PoissNum=PoissNum+1
+ Proba=Proba*AverNum/PoissNum
+ Repar=Repar+Proba
+ end do
+ else
+ call gaussdev(Seed,GaussNum)
+ GaussNum=GaussNum*sqrt(AverNum)-0.5+AverNum
+ if(GaussNum<=0.0d0)GaussNum=0.0d0
+ PoissNum=nint(GaussNum)
+ endif
+
+ return
+ end subroutine poissdev
+ !=======================================================================
+
+ !=======================================================================
+ subroutine gaussdev( Seed, GaussNum )
+ implicit none
+ integer,dimension( IRandNumSize ) :: Seed
+ real(kind=8) :: GaussNum
+
+ real(kind=8) :: fac,rsq,v1,v2
+
+ if (IGauss.eq.IZero) then
+ rsq=0.0d0
+ do while (rsq.ge.1.0d0.or.rsq.le.0.0d0)
+ call ranf(Seed,v1)
+ call ranf(Seed,v2)
+ v1=2.0d0*v1-1.0d0
+ v2=2.0d0*v2-1.0d0
+ rsq=v1**2+v2**2
+ end do
+ fac=sqrt(-2.0d0*log(rsq)/rsq)
+ GaussBak=v1*fac
+ GaussNum=v2*fac
+ IGauss=1
+ else
+ GaussNum=GaussBak
+ IGauss=0
+ endif
+ return
+ END subroutine gaussdev
+ !=======================================================================
+
+ !=======================================================================
+ subroutine rans( NIn, StartVal, SeedArray )
+ implicit none
+ integer :: NIn
+ integer :: StartVal
+ integer,dimension( MaxRandNumStreams, IRandNumSize ) :: SeedArray
+
+ integer,dimension( IRandNumSize ) :: atothek
+ integer,dimension( IRandNumSize ) :: K
+ integer,dimension( IRandNumSize ) :: InSeed
+ integer,dimension( IRandNumSize ) :: OutSeed
+ integer,dimension( IBinarySize ) :: KBinary
+
+ integer :: N, I
+
+ if( mod(NIn,2) .eq. 1 ) then
+ N = NIn
+ else
+ N = NIn + 1
+ endif
+
+ if( StartVal .eq. IZero ) then
+ SeedArray( 1, 1 ) = DefaultSeed( 1 )
+ SeedArray( 1, 2 ) = DefaultSeed( 2 )
+ SeedArray( 1, 3 ) = DefaultSeed( 3 )
+ SeedArray( 1, 4 ) = DefaultSeed( 4 )
+ else
+ SeedArray( 1, 1 ) = abs( StartVal )
+ SeedArray( 1, 2 ) = IZero
+ SeedArray( 1, 3 ) = IZero
+ SeedArray( 1, 4 ) = IZero
+ endif
+
+ if( N .eq. 1 ) then
+ atothek( 1 ) = Multiplier( 1 )
+ atothek( 2 ) = Multiplier( 2 )
+ atothek( 3 ) = Multiplier( 3 )
+ atothek( 4 ) = Multiplier( 4 )
+ else
+ call ranfk( N, K )
+ call ranfkbinary( K, KBinary )
+ call ranfatok( Multiplier, KBinary, atothek )
+ do I = 2, N
+ InSeed( 1 ) = SeedArray( I-1, 1 )
+ InSeed( 2 ) = SeedArray( I-1, 2 )
+ InSeed( 3 ) = SeedArray( I-1, 3 )
+ InSeed( 4 ) = SeedArray( I-1, 4 )
+ call ranfmodmult( InSeed, atothek, OutSeed )
+ SeedArray( I, 1 ) = OutSeed( 1 )
+ SeedArray( I, 2 ) = OutSeed( 2 )
+ SeedArray( I, 3 ) = OutSeed( 3 )
+ SeedArray( I, 4 ) = OutSeed( 4 )
+ end do
+ endif
+
+ return
+ end subroutine rans
+ !=======================================================================
+
+ !=======================================================================
+ subroutine ranfatok( a, Kbinary, atothek )
+ implicit none
+ integer,dimension( IRandNumSize ) :: a
+ integer,dimension( IBinarySize ) :: KBinary
+ integer,dimension( IRandNumSize ) :: atothek
+
+ integer,dimension( IRandNumSize ) :: asubi
+
+ integer :: I
+ asubi( 1 ) = a( 1 )
+ asubi( 2 ) = a( 2 )
+ asubi( 3 ) = a( 3 )
+ asubi( 4 ) = a( 4 )
+
+ atothek( 1 ) = 1
+ atothek( 2 ) = IZero
+ atothek( 3 ) = IZero
+ atothek( 4 ) = IZero
+
+ do I = 1, 45
+ if( KBinary( I ) .ne. IZero ) then
+ call ranfmodmult( atothek, asubi, atothek )
+ endif
+ call ranfmodmult( asubi, asubi, asubi )
+ end do
+
+ return
+ end subroutine ranfatok
+ !=======================================================================
+
+ !=======================================================================
+ subroutine ranfk( N, K )
+ implicit none
+ integer :: N
+ integer, dimension( IRandNumSize ) :: K
+
+ integer :: nn, r4, r3, r2, q4, q3, q2, q1
+
+ nn = N + iranfeven( N )
+
+ q4 = 1024 / nn
+ r4 = 1024 - (nn * q4)
+ q3 = (r4 * 4096) / nn
+ r3 = (r4 * 4096) - (nn * q3)
+ q2 = (r3 * 4096) / nn
+ r2 = (r3 * 4096) - (nn * q2)
+ q1 = (r2 * 4096) / nn
+
+ K( 1 ) = q1
+ K( 2 ) = q2
+ K( 3 ) = q3
+ K( 4 ) = q4
+
+ return
+ end subroutine ranfk
+ !=======================================================================
+
+ !=======================================================================
+ subroutine ranfkbinary( K, KBinary )
+ implicit none
+ integer, dimension( IRandNumSize ) :: K
+ integer, dimension( IBinarySize ) :: KBinary
+
+ integer, dimension( Mod4096DigitSize ) :: Bits
+ integer X, I, J
+
+ do I = 1, 4
+ X = K( I ) / 2
+ Bits( 1 ) = iranfodd( K( I ) )
+ do J = 2, Mod4096DigitSize
+ Bits( J ) = iranfodd( X )
+ X = X / 2
+ end do
+ do J = 1, Mod4096DigitSize
+ KBinary( (I-1)*Mod4096DigitSize + J ) = Bits( J )
+ end do
+ end do
+
+ return
+ end subroutine ranfkbinary
+ !=======================================================================
+
+ !=======================================================================
+ subroutine ranfmodmult( A, B, C )
+ implicit none
+ integer, dimension( IRandNumSize ) :: A, B, C
+
+ integer :: j1, j2, j3, j4, k1, k2, k3, k4
+
+ j1 = A( 1 ) * B( 1 )
+ j2 = A( 1 ) * B( 2 ) + A( 2 ) * B( 1 )
+ j3 = A( 1 ) * B( 3 ) + A( 2 ) * B( 2 ) + A( 3 ) * B( 1 )
+ j4 = A( 1 ) * B( 4 ) + A( 2 ) * B( 3 ) + A( 3 ) * B( 2 ) + A( 4 ) * B( 1 )
+
+ k1 = j1
+ k2 = j2 + k1 / 4096
+ k3 = j3 + k2 / 4096
+ k4 = j4 + k3 / 4096
+
+ C( 1 ) = mod( k1, 4096 )
+ C( 2 ) = mod( k2, 4096 )
+ C( 3 ) = mod( k3, 4096 )
+ C( 4 ) = mod( k4, 4096 )
+
+ return
+ end subroutine ranfmodmult
+ !=======================================================================
+
+ !=======================================================================
+ function iranfodd( N )
+ integer N
+ if( mod( N, 2 ) .eq. 0 ) then
+ iranfodd = 0
+ else
+ iranfodd = 1
+ endif
+
+ return
+ end function iranfodd
+ !=======================================================================
+ !=======================================================================
+ function iranfeven( N )
+ integer N
+ if( mod( N, 2 ) .eq. 0 ) then
+ iranfeven = 1
+ else
+ iranfeven = 0
+ endif
+ return
+ end function iranfeven
+ !=======================================================================
+
+end module random
--- /dev/null
+/* fftw3d_mpi_create_plan_c_wrap
+ *
+ * Copyright (c) 1997-1999, 2003 Massachusetts Institute of Technology
+ * Copyright (c) 2017 Boud Roukema
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/*
+ This is a C wrapper for rfftw3d_f77_mpi_create_plan() to bypass the
+ architecture-dependent behaviour of fftw2/openmpi described in
+ Debian openmpi bug #851918. It is derived from mpi/rfftw_f77_mpi.c
+ and mpi/fftw_f77_mpi.h in fftw-2.1.5-4.1 under GPL-2+. This requires
+ `use iso_C_binding' in the calling program, such as mpgrafic-0.3.10.
+ */
+
+#include <rfftw_mpi.h>
+
+/************************************************************************/
+void rfftw3d_f77_mpi_create_plan_c_wrap
+(rfftwnd_mpi_plan *p, void *comm,
+ int *nx, int *ny, int *nz, int *idir, int *flags)
+{
+ fftw_direction dir = *idir < 0 ? FFTW_FORWARD : FFTW_BACKWARD;
+
+ *p = rfftw3d_mpi_create_plan(MPI_COMM_WORLD,
+ *nz,*ny,*nx,dir,*flags);
+}
+/****************************************************************************/
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al !
+! prunet iap.fr !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ function aexp(tauu,omegam,omegav)
+! Evaluate a(tau) for Friedmann-Lemaitre-Robertson-Walker (FLRW) cosmology.
+! (Use tauu here to avoid conflict with function tau.)
+! Omegam := Omega today (a=1) in matter.
+! Omegav := Omega today (a=1) in vacuum energy.
+! dtau := H0*dt/a^2.
+ real aexp,tauu,omegam,omegav,tau,eta
+ external tau
+
+! Initial guess: matter-dominated solution.
+ aexp=1.0/(1.0-tauu*(sqrt(omegam)-0.25*omegam*tauu))
+! Newton-Raphson iteration.
+ niter=0
+10 niter=niter+1
+ eta=sqrt(omegam/aexp+omegav*aexp*aexp+1.0-omegam-omegav)
+ error=(tau(aexp,omegam,omegav)-tauu)*aexp*aexp*eta
+ aerr=abs(error)
+ rerr=aerr/aexp
+ aexp=aexp-error
+ if (min(aerr,rerr).gt.1.0d-6.and.niter.lt.10) go to 10
+ return
+ end
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ function tau(a,omegam,omegav)
+! Evaluate tau(a) (inverse of a(tau)) for FLRW cosmology.
+! Omegam := Omega today (a=1) in matter.
+! Omegav := Omega today (a=1) in vacuum energy.
+! dtau := H0*dt/a^2.
+ real tau,a,omegam,omegav
+ double precision om,ov,adp,rombint,dtauda
+ common /omegas/ om,ov
+ external dtauda
+
+ om=omegam
+ ov=omegav
+ adp=a
+ tau=rombint(dtauda,1.0d0,adp,1.0d-8)
+ return
+ end
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ function dtauda(a)
+ implicit double precision (a-h,o-z)
+ common /omegas/ omegam,omegav
+
+ eta=sqrt(omegam/a+omegav*a*a+1.0d0-omegam-omegav)
+ dtauda=1.0d0/(a*a*eta)
+ return
+ end
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ function dladt(a,omegam,omegav)
+! Evaluate dln(a)/dtau for FLRW cosmology.
+! Omegam := Omega today (a=1) in matter.
+! Omegav := Omega today (a=1) in vacuum energy.
+ real dladt,a,omegam,omegav,eta
+
+ eta=sqrt(omegam/a+omegav*a*a+1.0-omegam-omegav)
+! N.B. eta=a*H/H0, dladt = da/(H0*dtau) where tau is conformal time!
+ dladt=a*eta
+ return
+ end
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ function dplus(a,omegam,omegav)
+! Evaluate D+(a) (linear growth factor) for FLRW cosmology.
+! Omegam := Omega today (a=1) in matter.
+! Omegav := Omega today (a=1) in vacuum energy.
+ real dplus,a,omegam,omegav,eta
+ double precision om,ov,adp,rombint,ddplus
+ common /omegas/ om,ov
+ external ddplus
+
+ om=omegam
+ ov=omegav
+ adp=a
+ eta=sqrt(omegam/a+omegav*a*a+1.0-omegam-omegav)
+ dplus=eta/a*rombint(ddplus,0.0d0,adp,1.0d-8)
+ return
+ end
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ function ddplus(a)
+ implicit double precision (a-h,o-z)
+ common /omegas/ omegam,omegav
+
+ if (a.eq.0.0d0) then
+ ddplus=0.0d0
+ return
+ end if
+ eta=sqrt(omegam/a+omegav*a*a+1.0d0-omegam-omegav)
+ ddplus=2.5d0/(eta*eta*eta)
+ return
+ end
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ function adp(dpls,omegam,omegav)
+! Inverts the function dpls=dplus(a,omegam,omegav) for a=adp.
+ real adp,dpls,omegam,omegav,dplus,fomega
+ external dplus,fomega
+!
+ if (dpls.eq.0.0) then
+ adp=0.0
+ return
+ end if
+! Initial guess.
+ adp=1.0e-3
+! Newton-Raphson iteration.
+ niter=0
+10 niter=niter+1
+ dpls0=dplus(adp,omegam,omegav)
+ ddplda=dpls0*fomega(adp,omegam,omegav)/adp
+ error=(dpls0-dpls)/ddplda
+ adp=adp-error
+ aerr=abs(error)
+ rerr=aerr/adp
+ if (min(aerr,rerr).gt.1.0e-6.and.niter.lt.10) go to 10
+ return
+ end
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ function fomega(a,omegam,omegav)
+! Evaluate f := dlog[D+]/dlog[a] (logarithmic linear growth rate) for
+! lambda+matter-dominated cosmology.
+! Omega0 := Omega today (a=1) in matter only. Omega_lambda = 1 - Omega0.
+ real fomega,a,omegam,omegav,dplus,eta
+ external dplus
+!
+ if (omegam.eq.1.0.and.omegav.eq.0.0) then
+ fomega=1.0
+ return
+ end if
+ omegak=1.0-omegam-omegav
+ eta=sqrt(omegam/a+omegav*a*a+omegak)
+ fomega=(2.5/dplus(a,omegam,omegav)-1.5*omegam/a-omegak)/(eta*eta)
+ return
+ end
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ function rombint(f,a,b,tol)
+! Rombint returns the integral from a to b of f(x)dx using Romberg integration.
+! The method converges provided that f(x) is continuous in (a,b). The function
+! f must be double precision and must be declared external in the calling
+! routine. tol indicates the desired relative accuracy in the integral.
+!
+ parameter (MAXITER=100,MAXJ=5)
+ implicit double precision (a-h,o-z)
+ dimension g(MAXJ+1)
+ external f
+!
+ h=0.5d0*(b-a)
+ gmax=h*(f(a)+f(b))
+ g(1)=gmax
+ nint=1
+ error=1.0d20
+ i=0
+10 i=i+1
+ if (i.gt.MAXITER.or.(i.gt.5.and.abs(error).lt.tol)) &
+ & go to 40
+! Calculate next trapezoidal rule approximation to integral.
+ g0=0.0d0
+ do 20 k=1,nint
+ g0=g0+f(a+(k+k-1)*h)
+20 continue
+ g0=0.5d0*g(1)+h*g0
+ h=0.5d0*h
+ nint=nint+nint
+ jmax=min(i,MAXJ)
+ fourj=1.0d0
+ do 30 j=1,jmax
+! Use Richardson extrapolation.
+ fourj=4.0d0*fourj
+ g1=g0+(g0-g(j))/(fourj-1.0d0)
+ g(j)=g0
+ g0=g1
+30 continue
+ if (abs(g0).gt.tol) then
+ error=1.0d0-gmax/g0
+ else
+ error=gmax
+ end if
+ gmax=g0
+ g(jmax+1)=g0
+ go to 10
+40 rombint=g0
+ if (i.gt.MAXITER.and.abs(error).gt.tol) &
+ & write(*,*) 'Rombint failed to converge; integral, error, i=', &
+ & rombint,error,i
+ return
+ end
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al !
+! prunet iap.fr !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+module transform
+
+ use grafic_types
+ IMPLICIT NONE
+#ifdef ADD1US
+#define rfftw3d_f77_create_plan rfftw3d_f77_create_plan_
+#define rfftwnd_f77_destroy_plan rfftwnd_f77_destroy_plan_
+#define rfftwnd_f77_one_real_to_complex rfftwnd_f77_one_real_to_complex_
+#define rfftw3d_f77_mpi_create_plan rfftw3d_f77_mpi_create_plan_
+#define rfftwnd_f77_mpi_destroy_plan rfftwnd_f77_mpi_destroy_plan_
+#define rfftwnd_f77_mpi rfftwnd_f77_mpi_
+#define rfftwnd_f77_mpi_local_sizes rfftwnd_f77_mpi_local_sizes_
+#endif
+
+ interface fft_mpi
+ module procedure fft_mpi_single, fft_mpi_double
+ end interface
+
+contains
+
+ subroutine fft_forward(l,m,n,input,output)
+
+ integer :: l,m,n
+ real*8, dimension(l,m,n), intent(in) :: input
+ complex*16, dimension(l/2+1,m,n), intent(out) :: output
+ integer*8 :: plan
+
+ call rfftw3d_f77_create_plan(plan,l,m,n,FFTW_REAL_TO_COMPLEX, &
+ & FFTW_ESTIMATE)
+ call rfftwnd_f77_one_real_to_complex(plan,input,output)
+ call rfftwnd_f77_destroy_plan(plan)
+
+ end subroutine fft_forward
+
+ ! This covers both forward and backward ffts,
+ ! depending on plan
+
+ subroutine fft_mpi_double(plan,input,total_local_size)
+
+ use iso_C_binding
+
+ ! Arguments
+ type(c_ptr) :: plan
+ integer :: total_local_size
+ real(dp), dimension(total_local_size) :: input
+
+ ! Local variables
+ !integer :: ierr,myid,status
+ !real*4 :: tstart, tstop
+ real*8, allocatable, dimension(:) :: work
+
+ !allocate(work(total_local_size),stat=status)
+ !if (status /= 0) then
+ ! print*,'Could not allocate work for proc #',myid
+ ! stop
+ !endif
+ allocate(work(1))
+!!$ call rfftwnd_f77_mpi(plan,1,input,work, &
+!!$ & 0,FFTW_TRANSPOSED_ORDER)
+ call rfftwnd_f77_mpi(plan,1,input,work, &
+ & 0,FFTW_NORMAL_ORDER) !0 to ignore work, 1 to use it
+ deallocate(work)
+
+ end subroutine fft_mpi_double
+
+ subroutine fft_mpi_single(plan,input,total_local_size)
+
+ use iso_C_binding
+
+ ! Arguments
+ type(c_ptr) :: plan
+ integer :: total_local_size
+ real(sp), dimension(total_local_size) :: input
+
+ ! Local variables
+ !integer :: ierr,myid,status
+ !real*4 :: tstart, tstop
+ real*4, allocatable, dimension(:) :: work
+
+ !allocate(work(total_local_size),stat=status)
+ !if (status /= 0) then
+ ! print*,'Could not allocate work for proc #',myid
+ ! stop
+ !endif
+ allocate(work(1))
+!!$ call rfftwnd_f77_mpi(plan,1,input,work, &
+!!$ & 0,FFTW_TRANSPOSED_ORDER)
+ call rfftwnd_f77_mpi(plan,1,input,work, &
+ & 0,FFTW_NORMAL_ORDER) !0 to ignore work, 1 to use it
+ deallocate(work)
+
+ end subroutine fft_mpi_single
+
+
+
+end module transform
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al !
+! prunet iap.fr !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ subroutine splder(y,dy,n)
+! Splder fits a cubic spline to y and returns the first derivatives at
+! the grid points in dy. dy is equivalent to a 4th-order Pade
+! difference formula for dy/di.
+!
+ implicit double precision (a-h,o-z)
+ dimension f(100001),gspl(100001),y(n),dy(n)
+ common /spline/ gspl
+!
+ n1=n-1
+ if (n1.gt.100000) &
+ & write(*,*) 'Spline array overflow!!! n1=',n1,'>100000'
+! Quartic fit to dy/di at boundaries, assuming d3y/di3=0.
+ f(1)=(-10.0d0*y(1)+15.0d0*y(2)-6.0d0*y(3)+y(4))/6.0d0
+ f(n)=(10.0d0*y(n)-15.0d0*y(n1)+6.0d0*y(n-2)-y(n-3))/6.0d0
+! Solve the tridiagonal system
+! dy(i-1)+4*dy(i)+dy(i+1)=3*(y(i+1)-y(i-1)), i=2,3,...,n1,
+! with dy(1)=f(1), dy(n)=f(n).
+ do 10 i=2,n1
+ f(i)=gspl(i)*(3.0d0*(y(i+1)-y(i-1))-f(i-1))
+10 continue
+ dy(n)=f(n)
+ do 20 i=n1,1,-1
+ dy(i)=f(i)-gspl(i)*dy(i+1)
+20 continue
+ return
+ end
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ subroutine spintn(y,dy,z,n)
+! Spintn calculates z(i) = the integral from 1 to i of s(j)dj, for 1 <= i <= n,
+! where s is the spline fit to y, and dy = ds/di.
+!
+ implicit double precision (a-h,o-z)
+ dimension y(n),dy(n),z(n)
+
+ ztemp=0.0d0
+ do 10 i=2,n
+ ztemp1=ztemp+0.5d0*(y(i-1)+y(i))+(dy(i-1)-dy(i))/12.0d0
+ z(i-1)=ztemp
+ ztemp=ztemp1
+10 continue
+ z(n)=ztemp
+ return
+ end
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ subroutine splini
+! Splini must be called before splder to initialize array g in common.
+
+ implicit double precision (a-h,o-z)
+ dimension gspl(100001)
+ common /spline/ gspl
+ save /spline/
+!
+ gspl(1)=0.0d0
+ do 10 i=2,100001
+ gspl(i)=1.0d0/(4.0d0-gspl(i-1))
+10 continue
+ return
+ end
+!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
+ subroutine matinv(a,n,np,y)
+! Invert the double precision nxn matrix a; physical dimensions are np x np.
+! Inverse is returned in y. WARNING: a is destroyed!
+ double precision a(np,np),y(np,np)
+ parameter (nmax=1000)
+ dimension indx(nmax)
+
+ if (n.gt.nmax) then
+ write(*,*) 'increase storage in ludcmp! n,nmax=',n,nmax
+ end if
+ do 12 j=1,n
+ do 11 i=1,n
+ y(i,j)=0.0d0
+11 continue
+ y(j,j)=1.0d0
+12 continue
+ call ludcmp(a,n,np,indx)
+ do 13 j=1,n
+ call lubksb(a,n,np,indx,y(1,j))
+13 continue
+ return
+ end
+
+ subroutine ludcmp(a,n,np,indx)
+ parameter (tiny=0.0d-20,nmax=1000)
+ double precision a(np,np),sum,temp
+ double precision aamax,vv(nmax)
+ dimension indx(n)
+ if (n.gt.nmax) then
+ write(*,*) 'increase storage in ludcmp! n,nmax=',n,nmax
+ end if
+ do 12 i=1,n
+ aamax=0.0d0
+ do 11 j=1,n
+ if (abs(a(i,j)).gt.aamax) aamax=abs(a(i,j))
+11 continue
+ if(aamax.eq.0.d0)then
+ write(6,*)'singular matrix.'
+ stop
+ endif
+ vv(i)=1./aamax
+12 continue
+ do 19 j=1,n
+ if (j.gt.1) then
+ do 14 i=1,j-1
+ sum=a(i,j)
+ if (i.gt.1) then
+ do 13 k=1,i-1
+ sum=sum-a(i,k)*a(k,j)
+13 continue
+ a(i,j)=sum
+ endif
+14 continue
+ endif
+ aamax=0.0d0
+ do 16 i=j,n
+ sum=a(i,j)
+ if (j.gt.1) then
+ do 15 k=1,j-1
+ sum=sum-a(i,k)*a(k,j)
+15 continue
+ a(i,j)=sum
+ endif
+ temp=vv(i)*abs(sum)
+ if (temp.ge.aamax) then
+ imax=i
+ aamax=temp
+ endif
+16 continue
+ if (j.ne.imax) then
+ do 17 k=1,n
+ temp=a(imax,k)
+ a(imax,k)=a(j,k)
+ a(j,k)=temp
+17 continue
+ vv(imax)=vv(j)
+ endif
+ indx(j)=imax
+ if (j.ne.n) then
+! if (a(j,j).eq.0.d0) a(j,j)=tiny
+ temp=1.0d0/a(j,j)
+ do 18 i=j+1,n
+ a(i,j)=a(i,j)*temp
+18 continue
+ endif
+19 continue
+! if (a(n,n).eq.0.0d0) a(n,n)=tiny
+ return
+ end
+!
+ subroutine lubksb(a,n,np,indx,b)
+ double precision a(np,np),b(np),sum
+ dimension indx(n)
+ ii=0
+ do 12 i=1,n
+ ll=indx(i)
+ sum=b(ll)
+ b(ll)=b(i)
+ if (ii.ne.0) then
+ do 11 j=ii,i-1
+ sum=sum-a(i,j)*b(j)
+11 continue
+ else if (sum.ne.0.0d0) then
+ ii=i
+ endif
+ b(i)=sum
+12 continue
+ do 14 i=n,1,-1
+ sum=b(i)
+ if (i.lt.n) then
+ do 13 j=i+1,n
+ sum=sum-a(i,j)*b(j)
+13 continue
+ endif
+ b(i)=sum/a(i,i)
+14 continue
+ return
+ end
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! wrap_gsl_rng_mod - fortran wrapper for bits of GNU Scientific Library !
+! !
+! Copyright (C) 2016 by Boud Roukema !
+! boud cosmo.torun.pl !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+module wrap_gsl_rng_mod
+ ! see e.g. https://stackoverflow.com/tags/fortran-iso-c-binding/info
+
+ interface
+ subroutine get_gsl_rng_seeds &
+ (nproc, iseed, MaxRandNumStreams, seeds) &
+ bind(C, name='get_gsl_rng_seeds')
+ use iso_C_binding
+ implicit none
+ ! INPUTS
+ integer (c_int), value :: nproc
+ integer (c_long), value :: iseed
+ integer (c_long), value :: MaxRandNumStreams
+ ! OUTPUT
+ integer (c_long), dimension(MaxRandNumStreams) :: seeds
+ end subroutine get_gsl_rng_seeds
+ end interface
+
+ interface
+ subroutine gauss_gsl &
+ (Seed, RandNum, free_gauss_gsl) &
+ bind(C, name='gauss_gsl')
+ use iso_C_binding
+ implicit none
+ integer (c_long), value :: Seed ! pass by value
+ real (c_double) :: RandNum ! pass by reference
+ integer (c_int), value :: free_gauss_gsl ! pass by value
+ end subroutine gauss_gsl
+ end interface
+
+end module wrap_gsl_rng_mod
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! wrap_rfftw3d_mod - fortran wrapper for bits of fftw2 !
+! !
+! Copyright (C) 2017 by Boud Roukema !
+! boud cosmo.torun.pl !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+module wrap_rfftw3d_mod
+ ! see e.g. https://stackoverflow.com/tags/fortran-iso-c-binding/info
+
+ interface
+ subroutine rfftw3d_f77_mpi_create_plan_c_wrap &
+ (rfftwnd_mpi_plan, comm, &
+ nx, ny, nz, idir, flags) &
+ bind(C, name='rfftw3d_f77_mpi_create_plan_c_wrap')
+ use iso_C_binding
+ implicit none
+ type (c_ptr) :: rfftwnd_mpi_plan
+ /*
+ C vs fortran communicator types are the reason
+ for this extra wrapper. One implementation of
+ the C communicator typedef is the following:
+
+ /usr/lib/openmpi/include/mpi.h
+ typedef struct ompi_communicator_t *MPI_Comm
+
+ Here we bypass this, for programs in which
+ only the MPI_COMM_WORLD communicator is needed.
+ */
+ integer :: comm ! dummy
+ integer(c_int) :: nx, ny, nz
+ integer(c_int) :: idir, flags
+ end subroutine rfftw3d_f77_mpi_create_plan_c_wrap
+ end interface
+
+end module wrap_rfftw3d_mod
--- /dev/null
+/***************************************************************************
+ * Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al *
+ * prunet iap.fr *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA *
+ * or see https://www.gnu.org/licenses/licenses.html#GPL . *
+ **************************************************************************/
--- /dev/null
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+! Copyright (C) 2008-2016 by Simon Prunet, Christophe Pichon et al !
+! prunet iap.fr !
+! !
+! This program is free software; you can redistribute it and/or modify !
+! it under the terms of the GNU General Public License as published by !
+! the Free Software Foundation; either version 2 of the License, or !
+! (at your option) any later version. !
+! !
+! This program is distributed in the hope that it will be useful, !
+! but WITHOUT ANY WARRANTY; without even the implied warranty of !
+! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the !
+! GNU General Public License for more details. !
+! !
+! You should have received a copy of the GNU General Public License !
+! along with this program; if not, write to the !
+! Free Software Foundation, Inc., !
+! 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA !
+! or see https://www.gnu.org/licenses/licenses.html#GPL . !
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
--- /dev/null
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (C) 2008-2016 by Simon Prunet ;
+; prunet iap.fr ;
+; ;
+; This program is free software; you can redistribute it and/or modify ;
+; it under the terms of the GNU General Public License as published by ;
+; the Free Software Foundation; either version 2 of the License, or ;
+; (at your option) any later version. ;
+; ;
+; This program is distributed in the hope that it will be useful, ;
+; but WITHOUT ANY WARRANTY; without even the implied warranty of ;
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;
+; GNU General Public License for more details. ;
+; ;
+; You should have received a copy of the GNU General Public License ;
+; along with this program; if not, write to the ;
+; Free Software Foundation, Inc., ;
+; 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA ;
+; or see https://www.gnu.org/licenses/licenses.html#GPL . ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
--- /dev/null
+#! /bin/sh
+# test-driver - basic testsuite driver script.
+
+scriptversion=2013-07-13.22; # UTC
+
+# Copyright (C) 2011-2013 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+# Make unconditional expansion of undefined variables an error. This
+# helps a lot in preventing typo-related bugs.
+set -u
+
+usage_error ()
+{
+ echo "$0: $*" >&2
+ print_usage >&2
+ exit 2
+}
+
+print_usage ()
+{
+ cat <<END
+Usage:
+ test-driver --test-name=NAME --log-file=PATH --trs-file=PATH
+ [--expect-failure={yes|no}] [--color-tests={yes|no}]
+ [--enable-hard-errors={yes|no}] [--]
+ TEST-SCRIPT [TEST-SCRIPT-ARGUMENTS]
+The '--test-name', '--log-file' and '--trs-file' options are mandatory.
+END
+}
+
+test_name= # Used for reporting.
+log_file= # Where to save the output of the test script.
+trs_file= # Where to save the metadata of the test run.
+expect_failure=no
+color_tests=no
+enable_hard_errors=yes
+while test $# -gt 0; do
+ case $1 in
+ --help) print_usage; exit $?;;
+ --version) echo "test-driver $scriptversion"; exit $?;;
+ --test-name) test_name=$2; shift;;
+ --log-file) log_file=$2; shift;;
+ --trs-file) trs_file=$2; shift;;
+ --color-tests) color_tests=$2; shift;;
+ --expect-failure) expect_failure=$2; shift;;
+ --enable-hard-errors) enable_hard_errors=$2; shift;;
+ --) shift; break;;
+ -*) usage_error "invalid option: '$1'";;
+ *) break;;
+ esac
+ shift
+done
+
+missing_opts=
+test x"$test_name" = x && missing_opts="$missing_opts --test-name"
+test x"$log_file" = x && missing_opts="$missing_opts --log-file"
+test x"$trs_file" = x && missing_opts="$missing_opts --trs-file"
+if test x"$missing_opts" != x; then
+ usage_error "the following mandatory options are missing:$missing_opts"
+fi
+
+if test $# -eq 0; then
+ usage_error "missing argument"
+fi
+
+if test $color_tests = yes; then
+ # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
+ red='\e[0;31m' # Red.
+ grn='\e[0;32m' # Green.
+ lgn='\e[1;32m' # Light green.
+ blu='\e[1;34m' # Blue.
+ mgn='\e[0;35m' # Magenta.
+ std='\e[m' # No color.
+else
+ red= grn= lgn= blu= mgn= std=
+fi
+
+do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
+trap "st=129; $do_exit" 1
+trap "st=130; $do_exit" 2
+trap "st=141; $do_exit" 13
+trap "st=143; $do_exit" 15
+
+# Test script is run here.
+"$@" >$log_file 2>&1
+estatus=$?
+if test $enable_hard_errors = no && test $estatus -eq 99; then
+ estatus=1
+fi
+
+case $estatus:$expect_failure in
+ 0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
+ 0:*) col=$grn res=PASS recheck=no gcopy=no;;
+ 77:*) col=$blu res=SKIP recheck=no gcopy=yes;;
+ 99:*) col=$mgn res=ERROR recheck=yes gcopy=yes;;
+ *:yes) col=$lgn res=XFAIL recheck=no gcopy=yes;;
+ *:*) col=$red res=FAIL recheck=yes gcopy=yes;;
+esac
+
+# Report outcome to console.
+echo "${col}${res}${std}: $test_name"
+
+# Register the test result, and other relevant metadata.
+echo ":test-result: $res" > $trs_file
+echo ":global-test-result: $res" >> $trs_file
+echo ":recheck: $recheck" >> $trs_file
+echo ":copy-in-global-log: $gcopy" >> $trs_file
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
projects / mpgrafic.git / commitdiff