--- /dev/null
+LibreOffice build system
+------------------------
+
+Building the packages from source
+=================================
+Overview:
+ apt-get source libreoffice
+ apt-get build-dep libreoffice (to install build dependencies)
+ cd <source directory>
+ debuild
+
+Changing the build behaviour with DEB_BUILD_OPTIONS
+---------------------------------------------------
+These options are supported:
+
+ debug - build with FULL debug symbols. Default is just to build
+ with SMALL ones since the deb otherwise gets too big
+ ((>400M, ca. 1GB I-S))
+
+ ccache - enable the use of ccache during the build. This is highly
+ recommended if you plan on building the package more than
+ once, or doing any development on the packages. Be aware
+ that you need EXTRAPACKAGES="ccache" in /etc/pbuilderrc
+ when trying to build libreoffice with ccache in
+ $DEB_BUILD_OPTIONS under pbuilder (this has no effect
+ on speed, hough because the cache does not persist in
+ pbuilder)
+
+ parallel=<n>
+ - enable n projects to be built in parallel.
+ The log output can get a little confusing, and some projects
+ may fail still. You need to remove config.status if you
+ change this value after interrupting a build.
+
+ lang=<code>
+ - Build only the specified language
+
+ nocheck
+ - disable run of tests when enabled in rules
+
+
+The targets that are built during the package build
+---------------------------------------------------
+
+- targets run during the package build -
+
+unpack - Does prerequisites for the build: packing, unpacking etc.
+
+build - as the name says
+
+install - Copy files from debian/tmp/pkg into the correct locations
+ for the final package layout in debian/libreoffice*
+ where we need to do that here because it affects arch-dep
+ and arch-indep stuff and therefore cannot be done in
+ install-arch / install-indep.
+
+install-arch - installs arch-dependent stuff into the arch-dep. packages
+install-indep - " "-independent " " " "-indep. packages
+
+langpackgs - Installs the language packgs
+helppkgs - Installs the help packages
+
+maintscripts - Generates the maintainer scripts
+
+get-orig-source - gets original source tarballs and unpacks them
+ GIT_BASEURL can be set to a local mirror
+ GIT_BRANCH is the branch to clone from the repos
+ GIT_TAG is tag that should be packed
+ GIT_BRANCH and GIT_TAG can both be master
+
+Building the package from git master
+====================================
+To do a build from git master, do:
+ mkdir libreoffice-git
+ cd libreoffice-git
+ git clone https://salsa.debian.org/libreoffice-team/libreoffice/libreoffice.git debian
+ ./debian/rules unpack GIT_BRANCH=master GIT_TAG=master SOURCE_TARBALLS=n
+ dpkg-buildpackage
+
+Build system file layout
+========================
+debian/scripts:
+ Directory containing various debian-specific build-related scripts.
--- /dev/null
+ Readme for libreoffice package for Debian
+ --------------------------------------------
+
+Contents
+========
+Introduction
+Quick start
+Printer setup
+ Native CUPS support
+ Non-CUPS systems
+Language support
+ Spellcheck dictionaries, Hyphenation patterns and Thesauri
+ Help packages
+Display and crashing problems
+ X server crashes
+Font problems
+ Why are the menu fonts smaller than in older versions?
+ Changing the default user interface font typeface for non-KDE/Gnome desktops
+Disabling the splash screen
+AppArmor problems
+More information about LibreOffice in Debian
+
+
+Introduction
+============
+Welcome to the LibreOffice packages for the Debian distribution. These
+packages are of the release of LibreOffice with the following
+modifications:
+
+ * Packaged as libreoffice-core (architecture-dependent core files),
+ libreoffice-common (architecture-independent common files),
+ libreoffice-{calc,writer,draw,impress,base} (the LibreOffice modules)
+ libreoffice-l10n-<lang> and libreoffice-help-<lang> and
+ other subpackages (-filters-* for lesser used filters, -gtk/-gnome/-kde,
+ ttf-opensymbol for the OpenSymbol font, ...).
+
+ * Integration with other Debian packages:
+ - Global desktop integration for all users for KDE and Gnome desktops.
+ Menu entries for all window managers that support the Debian 'menu'
+ package.
+
+ * Some extra features not yet present in official releases:
+ - Many of the patches included in the Ximian edition
+
+ * Extra documentation - this README and man pages.
+
+
+Quick start
+===========
+
+To start using LibreOffice, execute the command
+
+ libreoffice
+
+as the user which you wish to start LibreOffice as. This will create the
+necessary user files in ~/.libreoffice/3 for you. Alternatively, you
+can start LibreOffice from the menus, if you have the menu package
+installed/use KDE or GNOME.
+
+Printing
+========
+
+Printing on CUPS systems
+------------------------
+The Debian packages include native CUPS support from version 1.1.1-3. This
+is standard in all OpenOffice.org versions since 2.0.
+When LibreOffice detects a CUPS system, it will download printer settings for
+all CUPS queues, and these can be set from within the printer properties dialog.
+
+If you wish to add additional filters or print commands, you can add them
+using 'spadmin'. Note that the 'Add a printer' option is disabled - you
+should add printers using your favourite CUPS frontend.
+
+When creating a new document, LibreOffice will use the default paper size of
+your default CUPS printer queue. If your new documents have the wrong paper
+size, please check the configuration of your printer.
+
+Non-CUPS systems (lpr, lprng, SAL_DISABLE_CUPS=1)
+---------------------------------
+There is a tool supplied with LibreOffice for setting up printers. You can
+execute this with the command
+
+ /usr/lib/openoffice/program/spadmin
+
+To change the page size and other default settings on non-CUPS systems,
+modify /etc/openoffice/psprint.conf. The settings are documented in there.
+
+Language support
+================
+You can get foreign language support by installing the
+libreoffice-l10n-<lang> package for your language. You will also need the
+'locales' (or belocs-locales-data for some locales, alternatively locales-all
+if you want all locales) package installed.
+The user interface language is selected according to your locale(1) settings.
+
+To change the user interface language for all users, run
+
+ dpkg-reconfigure locales
+
+[ This is not needed when you install locales-all ]
+
+To change the language for just one user, you must arrange for the LC_MESSAGES
+or LANG environment variable to be set. You can list all available locales
+with the command 'locale -a'.
+For example, to run LibreOffice in German from the command line:
+
+ LANG=de_DE libreoffice
+
+Spellcheck dictionaries, Hyphenation patterns and Thesauri
+----------------------------------------------------------
+Currently, there are dictionaries available for Afrikaans, Arabic, Armenian,
+Bulgarian, Catalan, Croatian, Czech, Danish, Dutch, English (AUS/GB/US),
+Esperanto, Estonian, Farsi, Finnish, French, Galician, German (DE/CH/AT),
+Greek, Hebrew, Hungarian, Irish (Gaeilge), Italian, Kurdish, Latvian,
+Lithuanian, Manx Gaelic, Norwegian Bokmal, Norwegian Nynorsk, Polish,
+Portuguese, Portuguese (Brazilian), Russian, Scots Gaelic, Slovak, Slovenian,
+Spanish, Swahili, Swedish, Thai, Ukrainian and Uzbek.
+Dictionaries are packaged as myspell-<lang> (or, for newer ones improved
+for hunspell hunspell-<lang>).
+
+Currently, there are thesauri available for Czech, English (AUS/GB/US),
+German (DE/CH), Italian, Polish and Slovak.
+Thesauri are packaged as mythes-<lang>
+
+Currently, there are hyphenation patterns available for English (USA),
+Croatian, Estonian, German, Hungarian, Italian, Polish, Slovenian and
+Lithuanian.
+Hyphenation patterns are packaged as hyphen-<lang>.
+
+Help packages
+-------------
+Currently, there are localized help packages available for
+Bulgarian, Chinese, Czech, Danish, Dutch, English (GB), English (USA),
+Estonian, French, Galician, German, Hungarian, Italian, Japanese, Khmer,
+Macedonian, Polish, Portuguese (Brazil), Russian, Slovakian, Slovenian and
+Spanish and Swedish.
+They are packaged as libreoffice-help-<lang>.
+
+Problems
+================================
+
+Here are some problems that have been reported with this version. If you do
+not see your problem here, please check for open bug reports:
+
+ http://bugs.debian.org/debian-openoffice@lists.debian.org
+
+1. If you are using NFS mounted file systems, you should make sure that locking
+is functioning:
+
+ 'Make sure NFS lockd/statd is running on the client, or mount the NFS export
+ with the 'nolock' option.
+
+ If /usr gets mounted from an initrd, check 'ps' output once the system is
+ fully booted to ensure that you see a [lockd] kernel process, or an
+ 'rpc.lockd' / 'rpc.statd' userspace process.
+
+ If not, just issue your mount command again (no need to even -o remount it
+ seems!) and run /etc/init.d/nfs-common restart.' (Thanks to Gavin Hamill)
+
+ See this mailing list thread for more information:
+ http://lists.debian.org/debian-openoffice/2004/debian-openoffice-200402/msg00223.html
+
+X server crash with Matrox cards
+--------------------------------
+If your X server is using the mga driver, you may find that your X server
+crashes. You can work around this problem by adding this line to the mga
+Device section:
+
+ Option "XaaNoScreenToScreenColorExpandFill"
+
+There is a bug already open against xserver-xfree86 for this problem. Thanks
+to Philip Armstrong for this information.
+
+LibreOffice crash with nVidia cards
+--------------------------------------
+It seems that LibreOffice can trigger some obscure bugs in the X server
+drivers for Nvidia cards too, especially if you have more than one processor.
+Try updating your drivers to the latest version.
+
+Moreover LibreOffice may hang and takes X with it when RenderAccel
+is enabled when using the proprietary nVidia Drivers. Disabling this option
+helps then.
+
+Font problems
+=============
+
+Why are the menu fonts smaller than in older versions?
+------------------------------------------------------
+This is caused by a change in the way LibreOfffice interprets your X server DPI
+setting.
+This setting, when correctly configured, means that software can display text
+at its true size on the display.
+
+The official OpenOffice.org version assumes that anyone who has their X server
+configured with a DPI of less than 96 has not actually configured it at all,
+and sets it back to 96. Unfortunately, this has the side effect that
+displays with a lower DPI setting, such as some LCD laptop displays, cannot
+display the page at its true size.
+
+So you can fix this by correctly setting the DPI for your X server. Gnome
+users will find that it is set to 96 DPI by default; others may need to edit
+their X server configuration.
+
+The best way to get the correct DPI setting is to add a 'DisplaySize' entry to
+the Monitor section. From the XF86Config-4 man page:
+
+ DisplaySize width height
+ This optional entry gives the width and height, in millimetres, of the
+ picture area of the monitor. If given this is used to calculate the
+ horizontal and vertical pitch (DPI) of the screen.
+
+If you set this value correctly, X will calculate and use the correct DPI
+setting, even if you use several different display resolutions.
+
+From Nikita V. Youshchenko <yoush at cs.msu.su>:
+
+- Many display manager configurations pass the option "-dpi 100" to the X
+ server by default, overriding any autodetected DPI. This has to be removed
+ for DisplaySize to work. The file that you need to edit varies depending on
+ the way your X server is started:
+ xdm: /etc/X11/xdm/Xservers
+ kdm: /etc/kde3/kdm/Xservers
+ gdm: /etc/gdm/gdm.conf
+ startx: /etc/X11/xinit/xserverrc
+
+- Gnome's gconf overrides the autodetected DPI, by setting Xft.dpi to a value
+ entered in configuration dialog, 96 by default. I don't know what is
+ the clean fix for this. Perhaps it should be fixed on the Gnome side.
+
+From Juergen Kreileder <jk at blackdown.de>:>
+
+- Note that with most recent graphics cards and monitors XFree86 is able to
+ get the monitor size (and thus the correct dpi value) through ddc.
+ (**) NVIDIA(0): Validated modes for display device DFP-0:
+ (**) NVIDIA(0): Default mode "1600x1200": 189.0 MHz, 87.5 kHz, 70.0 Hz
+ (II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
+ (--) NVIDIA(0): Display dimensions: (410, 310) mm
+ (--) NVIDIA(0): DPI set to (99, 98)
+ (That's with the proprietary NVIDIA drivers but other XFree86 drivers have
+ that support too.)
+
+If you use KDE or Gnome, LibreOffice will use the same font face and size as
+your desktop environment. If you use another window manager, you can either
+let it pick a default font itself, or change the font to be used (see next
+section), or set the OOO_FORCE_DESKTOP environment variable to
+kde (for kde3)/kde4 or gnome, to use KDE or Gnome settings respectively.
+
+Changing the default user interface font typeface for non-KDE/Gnome desktops
+----------------------------------------------------------------------------
+If you do not want to use KDE or Gnome settings and want to change font sizes
+within LibreOffice, you can configure the user interface font as follows:
+
+- Font size -
+
+You can change the font scaling using the user interface:
+
+ Tools Menu -> Options -> View -> Scale
+
+- Font typeface -
+
+You can change the default font typeface by replacing it with a different font
+installed on your system. This can be done using the font replacement function.
+Choose Tools - Options - LibreOffice - Font Replacement to access this
+function.
+
+To change the font of the LibreOffice user interface, you have to replace
+the default font "Andale Sans UI" with another font and mark the "always"
+setting for this replacement. "Andale Sans UI" is not selectable and has to be
+typed in. The replacement font has to be a font which supports the requested
+locale ( e.g for Korean language the replacement font has to be a font
+including Korean characters).
+
+Refer to the LibreOffice Help for a detailed explanation of the font
+replacement dialog.
+
+Disabling the splash screen
+===========================
+If you don't like the splash screen staying in front of other windows while
+LibreOffice is loading, you can disable it by editing
+/etc/openoffice/sofficerc. Change Logo=1 to Logo=0.
+
+AppArmor problems
+=================
+
+LibreOffice in Debian ships with AppArmor profiles:
+
+ /etc/apparmor.d/usr.lib.libreoffice.*
+
+To debug issues with these AppArmor profiles, see:
+
+ https://wiki.debian.org/AppArmor/Debug
+
+If you are using custom settings such as a custom env:UserInstallation
+directory, you may need to adjust them to match your local setup.
+In this example, you would need to add your custom
+env:UserInstallation to @{libo_user_dirs} in the
+usr.lib.libreoffice.program.soffice.bin profile.
+
+More information about LibreOffice in Debian
+===============================================
+Please read the official README.gz (in the same directory as this file), too.
+
+If you have questions, either post to our the mailing list:
+
+ http://lists.debian.org/debian-openoffice
+
+The Debian LibreOffice team
--- /dev/null
+Package directory modes
+=======================
+The packages can be built directly from a set of git checkouts (vcs mode),
+or from a set of release tarballs (tarball mode).
+
+Vcs mode is useful if you want to work on libreoffice during the development
+cycle. You can check out the latest sources and track them while you make
+changes.
+
+Tarball mode is used to prepare packages of official libreoffice releases
+from the tarballs created by upstream.
+
+Source package creation steps for tarball mode
+==============================================
+The .orig.tar.gz consists of the (separate) source tarballs available
+from The Document Foundation from
+http://download.documentfoundation.org/libreoffice/src/<version/
+
+The libreoffice-x.y.z.a.tar.xz is taken verbatim as original tarball:
+$ ln -s libreoffice-x.y.z.a.tar.xz libreoffice_x.y.z.orig.tar.xz
+$ tar xfvJ libreoffice-x.y.z.a.tar.xz
+
+For a full build you also need helpcontent2 and translations (and the external
+modules' tarballs) which normally are git submodules and/or downloaded during
+the build.
+
+As dpkg-source expects e.g. helpcontent2 as a subdir we can't directly
+symlink (as the tarball contains libreoffice-x.y.z.a/helpcontent2).
+We need to create them manually/repack them:
+
+$ tar xfvJ libreoffice-helpcontent2-x.y.z.a.tar.xz
+$ tar xfvJ libreoffice-translations-x.y.z.a.tar.xz
+$ cd libreoffice-x.y.z.a
+$ for i in helpcontent2 translations tarballs; do \
+ tar cfvJ ../libreoffice_5.2.1.orig-$i.tar.xz $i; \
+ done
+
+The get-orig-source debian/rules target does this with our custom
+mk-origtargz script.
+
+Given those files are not in the tarballs above they need to be removed
+as otherwise dpkg complains
+$ rm ChangeLog-*
+
+We also need the "tarballs".
+A standard upstream build downloads it during the build, but we neither can't nor want it here of course. So:
+
+$ rm -rf tarballs
+$ mkdir -p tarballs
+$ ./autogen.sh $(filter-out --disable-fetch-external,$(CONFIGURE_FLAGS)) --with-all-tarballs
+$ make download gb_LO_VER=<version>
+
+or base on an old version and add/remove the files manually and/or symlink
+to the old version if this didn't change - see git diff of download.lst. This
+is even better given we probably want to add only needed stuff there, and not
+all tarballs (most of those we don't use)
+
+See the "Format: 3.0 (quilt)" section dpkg-source(1) for more details.
+
+Package directory layout - vcs mode
+===================================
+
+In vcs mode we are working directly from checkouts of the libreoffice sources.
+
+We pull in sources to these places:
+
+ "top" directory - checkout of LO's "core" repo
+ debian - git packaging repository from pkg-openoffice project on alioth
+ helpcontent2 - checkout of LO's "help" repo (git submodule)
+ translations - checkout of LO's "translations" repo (git submodule)
+ tarballs - see above in tarball mode
+
+$ git clone git://gerrit.libreoffice.org/core
+$ cd core
+$ git submodule init
+
+(maybe remove dictionaries again, see .git/config, we don't need it here.)
+
+./g pull -r (git pull -r, but also does the necessary steps for the submodules)
+
+For tarballs/, see above
+
--- /dev/null
+LibreOffice QA Tools
+
+smoketest
+=========
+
+smoketest executes a set of macros that create a minimal document in
+each of LibreOffice's applications, tests cut&paste and
+saving/loading in various formats.
+
+Invoke it as oosmoketest.
+
+This program manipulates the LibreOffice user configuration, USE IT
+WITH A DEDICATED USER ACCOUNT if you value your settings.
+
+qadevOOo
+========
+
+qadevOOo is a framework for executing tests for the LibreOffice
+API. It is documented at
+http://qa.openoffice.org/qadevOOo_doc/user-guide.html
+
+Predefined properties files exist in /usr/lib/openoffice/qadevOOo.
+
+Invoke it like e.g:
+
+ ootestapi -ini /usr/lib/openoffice/qadevOOo/java.props -o sd.SdMasterPage
+
+That properties files specify AppExecutionCommand, i.e. an office will
+be started if necessary. Some tests, however seem to work better if
+the office was started manually, as written in the user guide.
+
+ /usr/lib/openoffice/program/soffice "-accept=socket,host=localhost,port=8100;urp;"
+
+Use this invocation and not ooffice to prevent interference with the
+quickstarter code.
+
+testtool
+========
+
+testtool is a framework for executing tests by automating actions in
+LibreOffice's user interface. It is documented at
+http://qa.openoffice.org/qatesttool/index.html
+
+Test scripts for testtool are available in the
+libreoffice-qa-ui-tests package.
+
+Start it as ootesttool.
+
+If you're starting it for the first time, create a profile in
+Extras->Settings where you specify the location of test scripts and
+output path for log files. The default values point to the scripts
+from the libreoffice-qa-ui-tests package, so simply giving a name
+to the profile and pressing the "New" button is enough.
+
+Then open a test script and press F5 to start the test.
+
+Some test scripts may change your LibreOffice user
+configuration. USE IT WITH A DEDICATED USER ACCOUNT if you value your
+settings.
--- /dev/null
+PROGRESSBARCOLOR=215,7,81
--- /dev/null
+Reporting a bug against LibreOffice
+--------------------------------------
+I) Make sure it's a LibreOffice bug after all: #398923 and its friends for
+ example are not.
+ Set the Version: header right. If you found a bug in a specific version,
+ set that as version:, even if you in the meanwhile upgraded. If you are on
+ an up-to-date version and tried old versions and they have the bug, too, set
+ the Version: header to the earliest version you found it in (of course, if
+ versions inbetween don't have the bug use the version in which it reappeared
+ and sustained to the current version)
+
+II) Check on the BTS (http://bugs.debian.org/src:libreoffice) whether the
+ bug already is reported. Do *NOT* report a new one then. For judging whether
+ it's already reported, read *ALL* the bugs, think, try and use common sense.
+
+III) If you have crashes with a document, try another one. If only that or
+ similar docs causes problems please attach THIS (or a similar type one
+ causing it). Otherwise, don't file a bug, we can't look at it anyway.
+
+IV) Please attach more info if possible (see
+ https://wiki.documentfoundation.org/QA/BugReport/Debug_Information#GNU.2FLinux).
+ Install libreoffice-*-dbgsym or libreoffice-dbg before doing this (and maybe
+ the packages it Recommends and/or -dbgsym/-dbg of the libraries LO depends
+ on).
+ Please note that those *-dbgsym packages are not in the main archive; you
+ need to add the debug archive for that.
+ See https://wiki.debian.org/AutomaticDebugPackages
+ Please also read /usr/share/doc/libreoffice-common/README.gz for common
+ problems ("Problems During Program Startup")
+ If you have NFS/Samba/... file locking problems (i.e. files opened
+ read-only when they should be read-write), also see the "File Locking"
+ section in above file.
+
+V) If the bug is also in the version you can get from www.libreoffice.org, file
+ it there (see https://wiki.documentfoundation.org/QA/BugReport) in the first
+ place. If you really think this also should be a bug in the Debian BTS
+ (because it's (release-)critical or otherwise important) please file a bug
+ there too *BUT* note the TDF bug number in the bug or mark it forwarded
+ yourself if you can. Especially this is for feature requests.
+ If you tested other LibreOffice packages and the bug is (not) in version
+ foo from bar, mention that, too.
+
+VI) Only report bugs on completely up-to-date systems. Don't file bugs on a
+ obsolete version and neither on sid/testing systems really old. Nor on
+ backports, see https://backports.debian.org/Instructions/#index6h2. If bugs
+ got fixed in sid, it doesn't make sense to file them anymore. (Exception
+ is security bugs or really critical bugs which should be get fixed in
+ stable.) When you think a dependency is missing/wrong/too lax please be
+ *sure* that this is the case before reporting it. Most times it isn't.
+ Use common sense and the bug severities for judging here. When you think
+ you have an up-to-date system, check whether you really have one.
+ (And do a dist-upgrade, try to reproduce the bug again).
+ Also don't report bugs on broken mix systems unless you are sure about the
+ dependencies/conflicts (see above).
+
+VII) Please give as much info as possible (installed LibreOffice packages, installed
+ extensions, "special" configs, additions, changes, whatever). Better too
+ much than too less. (See #396225 for example which was caused by an
+ unsupportable, non-free extension)
+
+Thanks.
--- /dev/null
+Package: libreoffice-evolution
+Architecture: %OOO_BASE_ARCHS%
+Section: gnome
+Depends: libreoffice-base,
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ libreoffice-core (= ${binary:Version}),
+ ${libebook-dep},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: evolution
+Description: office productivity suite -- Evolution addressbook support
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package allows LibreOffice to access Evolution address books.
+ You need to install evolution separately.
+
--- /dev/null
+Package: libreoffice-sdbc-firebird
+Depends: libreoffice-core-nogui | libreoffice-core, ${shlibs:Depends}, ${misc:Depends}, ${firebird-engine-depends}
+Architecture: %OOO_FIREBIRD_ARCHS%
+Section: database
+Enhances: libreoffice-base-drivers
+Description: Firebird SDBC driver for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The Firebird SDBC Driver allows one to use the Firebird database from
+ LibreOffice without any wrapper layer such as ODBC or JDBC.
+
--- /dev/null
+Package: fonts-opensymbol
+Section: fonts
+Architecture: all
+Multi-Arch: foreign
+Depends: ${misc:Depends}
+Recommends: fontconfig
+Replaces: ttf-opensymbol
+Provides: ttf-opensymbol
+Description: OpenSymbol TrueType font
+ This package contains the OpenSymbol TrueType font included in
+ LibreOffice. This font contains symbols (like fonts as Wingdings(tm)),
+ bullets (needed for bullets in LibreOffice) and non-latin character
+
--- /dev/null
+Package: libreoffice-gtk3
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: libreofficekit-data
+Recommends: gstreamer1.0-gtk3
+Section: gnome
+Enhances: libreoffice
+Description: office productivity suite -- GTK+ 3 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the Gtk plugin for drawing LibreOffices widgets
+ with Gtk+ 3 and Gtk/GNOMEish print dialog when running under GNOME.
+
+Package: gir1.2-lokdocview-0.1
+Architecture: %OOO_ARCHS%
+Section: introspection
+Depends: ${gir:Depends}, ${misc:Depends}, liblibreofficekitgtk (= ${binary:Version})
+Description: GTK3 widget wrapping LibreOffice functionality - introspection
+ LOKDocView is the GTK3 widget that wraps the libreoffice functionality and
+ exposes a simple API for applications to use this widget.
+ .
+ This package contains the Introspection data.
+
+Package: liblibreofficekitgtk
+Section: gnome
+Architecture: %OOO_ARCHS%
+Depends: ${shlibs:Depends}, ${misc:Depends}, libreofficekit-data
+Replaces: libreoffice-gtk3 (<< 1:5.2.0~)
+Breaks: libreoffice-gtk3 (<< 1:5.2.0~)
+Recommends: libreoffice-gtk3
+Description: GTK3 widget wrapping LibreOffice functionality
+ This package contains a (basic) GTK+ document viewer widget (used
+ by e.g. LOKDocView)
+
+Package: libreofficekit-data
+Architecture: all
+Section: web
+Depends: ${misc:Depends}
+Recommends: gir1.2-lokdocview-0.1
+Description: common data for LOKDocView
+ LOKDocView is the GTK3 widget that wraps the libreoffice functionality and
+ exposes a simple API for applications to use this widget.
+ .
+ This package contains architecture-independent data (e.g. the selection
+ handlers).
+
--- /dev/null
+Package: libreoffice-gtk4
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: libreofficekit-data
+Section: gnome
+Enhances: libreoffice
+Description: office productivity suite -- GTK+ 4 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the Gtk plugin for drawing LibreOffices widgets
+ with Gtk+ 4 and Gtk/GNOMEish print dialog.
+ .
+ You need to enable it manually by export SAL_USE_VCLPLUGIN=gtk4.
+
--- /dev/null
+Package: libreoffice-help-@LCODE@
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version}),
+ ${help-recommends}
+Depends: libreoffice-l10n-@LCODE@,
+ libreoffice-common (>= 1:6.1.0~),
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.4.1~rc1)
+Description: office productivity suite -- @LNAME@ help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ @LNAME@.
+
--- /dev/null
+Source: libreoffice
+Section: editors
+Priority: optional
+Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
+Uploaders: Rene Engelhard <rene@debian.org>, Chris Halls <halls@debian.org>
+Build-Depends: %BUILD_DEPS%,
+Build-Depends-Arch: %BUILD_DEPS_ARCH%
+Build-Depends-Indep: %BUILD_DEPS_INDEP%
+Build-Conflicts: nvidia-glx-dev,
+ nvidia-glx-legacy-dev,
+ amd-libopencl1,
+ nvidia-libopencl1
+Standards-Version: 4.0.1
+Vcs-Git: https://salsa.debian.org/libreoffice-team/libreoffice/libreoffice.git
+Vcs-Browser: https://salsa.debian.org/libreoffice-team/libreoffice/libreoffice
+Bugs: @BUGS@
+Homepage: http://www.libreoffice.org
+
+Package: libreoffice
+Architecture: %OOO_ARCHS%
+Section: metapackages
+Depends: libreoffice-base%OOO_NO_BASE_ARCHS%,
+ libreoffice-calc,
+ libreoffice-core (= ${binary:Version}),
+ libreoffice-draw,
+ libreoffice-impress,
+ libreoffice-math,
+ libreoffice-report-builder-bin%OOO_NO_REPORTBUILDER_ARCHS%,
+ libreoffice-writer,
+ ${misc:Depends},
+ ${pyuno-depends}
+Recommends: ${java-common-depends},
+ fonts-sil-gentium-basic,
+ fonts-crosextra-caladea,
+ fonts-crosextra-carlito,
+ fonts-dejavu,
+ fonts-liberation,
+ fonts-liberation2,
+ fonts-linuxlibertine,
+ fonts-noto-core,
+ fonts-noto-extra,
+ fonts-noto-mono,
+ fonts-noto-ui-core,
+ libreoffice-script-provider-bsh,
+ libreoffice-script-provider-js,
+ libreoffice-script-provider-python,
+ libreoffice-nlpsolver,
+ libreoffice-report-builder%OOO_NO_REPORTBUILDER_ARCHS%,
+ libreoffice-wiki-publisher,
+ libreoffice-sdbc-mysql,
+ libreoffice-sdbc-postgresql
+Suggests: cups-bsd,
+ ghostscript,
+ hunspell-dictionary,
+ hyphen-hyphenation-patterns,
+ firefox-esr | thunderbird | firefox,
+ imagemagick | graphicsmagick-imagemagick-compat,
+ libgl1,
+ libreoffice-grammarcheck,
+ libreoffice-help (= ${help-l10n-virtual-version}),
+ libreoffice-l10n (= ${help-l10n-virtual-version}),
+ ${libsane-suggests},
+ libxrender1,
+ myspell-dictionary,
+ mythes-thesaurus,
+ openclipart-libreoffice,
+ pstoedit,
+ unixodbc,
+ gnupg,
+ gpa,
+ ${gstreamer-plugins-suggests},
+ ${java-runtime-depends},
+ ${ooo-officebean-dep},
+ libreoffice-librelogo,
+ %LO-DESKTOP-INTEGRATION%
+Conflicts: libreoffice-dev (<= 1:5.0.3~rc1-2), libreoffice-dev-doc (<= 1:5.0.3~rc1-2)
+Description: office productivity suite (metapackage)
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This metapackage installs all components of libreoffice:
+ * libreoffice-writer: Word processor
+ * libreoffice-calc: Spreadsheet
+ * libreoffice-impress: Presentation
+ * libreoffice-draw: Drawing
+ * libreoffice-base: Database
+ * libreoffice-math: Equation editor
+ It also recommends additional packages (e.g. fonts) in order to match an
+ upstream LibreOffice install as closely as possible.
+ .
+ You can extend the functionality of LibreOffice by installing these
+ packages:
+ * hunspell-*/myspell-*: Hunspell/Myspell dictionaries
+ for use with LibreOffice
+ * libreoffice-l10n-*: UI interface translation
+ * libreoffice-help-*: User help
+ * mythes-*: Thesauri for the use with LibreOffice
+ * hyphen-*: Hyphenation patterns for LibreOffice
+ * libreoffice-gtk(2|3): Gtk UI Plugin, GNOME File Picker support
+ * libreoffice-gnome: GIO backend
+ * unixodbc: ODBC database support
+ * cups-bsd: Allows LibreOffice to detect your CUPS printer queues
+ automatically
+ * libsane: Use your sane-supported scanner with LibreOffice
+ * libxrender1: Speed up display by using Xrender library
+ * libgl1: OpenGL support
+ * openclipart-libreoffice: Open Clip Art Gallery with LibreOffice index
+ files
+ * firefox-esr | thunderbird | firefox:
+ Mozilla profile with Certificates needed for XML Security...
+ * openjdk-11-jre | openjdk-8-jre | java8-runtime:
+ Java Runtime Environment for use with LibreOffice
+ * pstoedit / imagemagick / ghostscript: helper tools for EPS
+ * gstreamer0.10-plugins-*: GStreamer plugins for use with LibreOffices
+ media backend
+ * libpaper-utils: papersize detection support via paperconf
+
+Package: libreoffice-nogui
+Architecture: %OOO_NOGUI_ARCHS%
+Section: metapackages
+Depends: libreoffice-base-nogui%OOO_NO_BASE_ARCHS%,
+ libreoffice-calc-nogui,
+ libreoffice-core-nogui (= ${binary:Version}),
+ libreoffice-draw-nogui,
+ libreoffice-impress-nogui,
+ libreoffice-math-nogui,
+ libreoffice-report-builder-bin-nogui%OOO_NO_REPORTBUILDER_ARCHS%,
+ libreoffice-writer-nogui,
+ ${misc:Depends},
+ ${pyuno-depends}
+Recommends: ${java-common-depends},
+ libreoffice-script-provider-bsh,
+ libreoffice-script-provider-js,
+ libreoffice-script-provider-python,
+ libreoffice-sdbc-mysql,
+ libreoffice-sdbc-postgresql
+Suggests: ghostscript,
+ hunspell-dictionary,
+ hyphen-hyphenation-patterns,
+ imagemagick | graphicsmagick-imagemagick-compat,
+ libreoffice-grammarcheck,
+ myspell-dictionary,
+ mythes-thesaurus,
+ pstoedit,
+ unixodbc,
+ gnupg,
+ gpa,
+ ${java-runtime-depends}
+Description: office productivity suite (metapackage, no GUI)
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This metapackage installs all components of libreoffice:
+ * libreoffice-writer: Word processor
+ * libreoffice-calc: Spreadsheet
+ * libreoffice-impress: Presentation
+ * libreoffice-draw: Drawing
+ * libreoffice-base: Database
+ * libreoffice-math: Equation editor
+ .
+ WITHOUT GUI SUPPORT.
+ .
+ This package is intended mostly for scripting needs.
+
+Package: libreoffice-l10n-za
+Section: metapackages
+Architecture: all
+Depends: libreoffice-l10n-af,
+ libreoffice-l10n-en-za,
+ libreoffice-l10n-nr,
+ libreoffice-l10n-nso,
+ libreoffice-l10n-ss,
+ libreoffice-l10n-st,
+ libreoffice-l10n-tn,
+ libreoffice-l10n-ts,
+ libreoffice-l10n-ve,
+ libreoffice-l10n-xh,
+ libreoffice-l10n-zu,
+ ${misc:Depends}
+Description: office productivity suite -- South African language packages
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package is a metapackage installing l10n packages for all 11 South
+ African languages.
+
+Package: libreoffice-l10n-in
+Section: metapackages
+Architecture: all
+Depends: libreoffice-l10n-as,
+ libreoffice-l10n-bn,
+ libreoffice-l10n-gu,
+ libreoffice-l10n-hi,
+ libreoffice-l10n-kn,
+ libreoffice-l10n-ml,
+ libreoffice-l10n-mr,
+ libreoffice-l10n-ne,
+ libreoffice-l10n-or,
+ libreoffice-l10n-pa-in,
+ libreoffice-l10n-ta,
+ libreoffice-l10n-te,
+ ${misc:Depends}
+Recommends: fonts-indic
+Description: office productivity suite -- Indic language packages
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package is a metapackage installing l10n packages for all available
+ indic languages.
+
+Package: libreoffice-core
+Architecture: %OOO_ARCHS%
+Depends: fontconfig,
+ fonts-opensymbol (>= 2:102.12),
+ libreoffice-common (>> ${base-version}),
+ ure (>= 1:7.4.0~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: libpaper-utils, ${gstreamer-plugins-suggests}
+Breaks: libreoffice-base (<< ${binary:Version}),
+ libreoffice-calc (<< ${binary:Version}),
+ libreoffice-dev (<< ${binary:Version}),
+ libreoffice-draw (<< ${binary:Version}),
+ libreoffice-evolution (<< ${binary:Version}),
+ libreoffice-gnome (<< ${binary:Version}),
+ libreoffice-gtk2 (<< ${binary:Version}),
+ libreoffice-gtk3 (<< ${binary:Version}),
+ libreoffice-impress (<< ${binary:Version}),
+ libreoffice-qt5 (<< ${binary:Version}),
+ libreoffice-kde4 (<< ${binary:Version}),
+ libreoffice-kde5 (<< ${binary:Version}),
+ libreoffice-kf5 (<< ${binary:Version}),
+ libreoffice-officebean (<< ${binary:Version}),
+ libreoffice-writer (<< ${binary:Version}),
+ browser-plugin-libreoffice,
+ libreoffice-pdfimport (<< 1:5.4~),
+ libreoffice-common (<< 1:5.4.1),
+ libreoffice-avmedia-backend-gstreamer (<< ${binary:Version})
+Conflicts: libreoffice-filter-binfilter, libreoffice-avmedia-backend-vlc, libreoffice-mysql-connector (<< 1:6.2.0~), libreoffice-core-nogui
+# for bullseye, copied from libreoffice-common, see #985297
+ ,
+ libreoffice-base (<< 1:7.0.0~alpha~),
+ libreoffice-calc (<< 1:7.0.0~alpha~),
+ libreoffice-draw (<< 1:7.0.0~alpha~),
+ libreoffice-impress (<< 1:7.0.0~alpha~),
+ libreoffice-math (<< 1:7.0.0~alpha~),
+ libreoffice-report-builder (<< 1:7.0.0~alpha~),
+ libreoffice-writer (<< 1:7.0.0~alpha~),
+Replaces: libreoffice-pdfimport (<< 1:5.4~), libreoffice-common (<< 1:6.3.0~rc1~), libreoffice-avmedia-backend-gstreamer, libreoffice-core-nogui
+Description: office productivity suite -- arch-dependent files
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the architecture-dependent core files of
+ LibreOffice. See the libreoffice package for more information.
+
+Package: libreoffice-core-nogui
+Architecture: %OOO_NOGUI_ARCHS%
+Depends: fontconfig,
+ fonts-opensymbol (>= 2:102.12),
+ libreoffice-common (>> ${base-version}),
+ ure (>= 1:7.4.0~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: libpaper-utils
+Breaks: libreoffice-base (<< ${binary:Version}),
+ libreoffice-calc,
+ libreoffice-dev (<< ${binary:Version}),
+ libreoffice-draw (<< ${binary:Version}),
+ libreoffice-evolution (<< ${binary:Version}),
+ libreoffice-gnome (<< ${binary:Version}),
+ libreoffice-gtk2,
+ libreoffice-gtk3,
+ libreoffice-impress (<< ${binary:Version}),
+ libreoffice-qt5,
+ libreoffice-kde4,
+ libreoffice-kde5,
+ libreoffice-kf5,
+ libreoffice-officebean (<< ${binary:Version}),
+ libreoffice-writer (<< ${binary:Version}),
+ browser-plugin-libreoffice,
+ libreoffice-pdfimport (<< 1:5.4~),
+ libreoffice-common (<< 1:5.4.1),
+ libreoffice-avmedia-backend-gstreamer (<< ${binary:Version})
+Conflicts: libreoffice-filter-binfilter, libreoffice-avmedia-backend-vlc, libreoffice-mysql-connector (<< 1:6.2.0~), libreoffice-core
+Provides: libreoffice-bundled
+Replaces: libreoffice-pdfimport (<< 1:5.4~), libreoffice-common (<< 1:6.3.0~rc1~), libreoffice-avmedia-backend-gstreamer, libreoffice-core
+Description: office productivity suite -- arch-dependent files (no GUI variant)
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the architecture-dependent core files of
+ LibreOffice without GUI support for server-based or commandline usage of
+ LibreOffice.
+
+Package: libreoffice-common
+Architecture: all
+Depends: libreoffice-style-colibre, ure, ${numbertext-data-recommends}, ${misc:Depends}
+Suggests: libreoffice-style,
+Recommends: ${pyuno-depends}, ${textcat-data-recommends}, poppler-data, xdg-utils, fonts-liberation2 | ttf-mscorefonts-installer
+Conflicts: openoffice.org-unbundled,
+ broffice,
+ libreoffice-filter-mobiledev,
+ libreoffice-l10n-4.3,
+ libreoffice-l10n-4.4,
+ libreoffice-wiki-publisher (<< 1.2.0+LibO5.4.0~rc2),
+ libreoffice-base (<< 1:7.0.0~alpha~),
+ libreoffice-base-nogui (<< 1:7.0.0~alpha~),
+ libreoffice-calc (<< 1:7.0.0~alpha~),
+ libreoffice-calc-nogui (<< 1:7.0.0~alpha~),
+ libreoffice-draw (<< 1:7.0.0~alpha~),
+ libreoffice-draw-nogui (<< 1:7.0.0~alpha~),
+ libreoffice-evolution (<< 1:7.0.0~alpha~),
+ libreoffice-gnome (<< 1:7.0.0~alpha~),
+ libreoffice-impress (<< 1:7.0.0~alpha~),
+ libreoffice-impress-nogui (<< 1:7.0.0~alpha~),
+ libreoffice-l10n (<< 7.0),
+ libreoffice-librelogo (<< 1:7.0.0~alpha~),
+ libreoffice-math (<< 1:7.0.0~alpha~),
+ libreoffice-math-nogui (<< 1:7.0.0~alpha~),
+ libreoffice-sdbc-postgresql (<< 1:7.0.0~alpha~),
+ python3-uno (<< 1:7.0.0~alpha~),
+ libreoffice-report-builder (<< 1:7.0.0~alpha~),
+ libreoffice-writer (<< 1:7.0.0~alpha~),
+ libreoffice-writer-nogui (<< 1:7.0.0~alpha~)
+Provides: libreoffice-l10n-en-us
+Breaks: libreoffice-core (<< 4:${oover}~),
+ libreoffice-core-nogui (<< 4:${oover}~),
+ libreoffice-core (<< 1:6.4.2~rc1),
+ libreoffice-help-5.2,
+ libreoffice-help (<< 5.4),
+ libreoffice-l10n (<< 7.0),
+ libreoffice-librelogo (<< 1:7.0.0~alpha),
+ libreoffice-sdbc-postgresql (<< 1:7.0.0~alpha),
+ libreoffice-report-builder (<< 1:7.0.0~alpha),
+ libreoffice-evolution (<< 1:7.0.0~alpha),
+ libreoffice-gnome (<< 1:7.0.0~alpha),
+ python3-uno (<< 1:7.0.0~alpha),
+ libreoffice-core (>= 4:${next-oover}~),
+ libreoffice-core-nogui (>= 4:${next-oover}~),
+ libreoffice-style-andromeda (<< 1:${oover}~),
+ libreoffice-style-crystal (<< 1:${oover}~),
+ libreoffice-style-crystal (>= 1:${next-oover}~),
+ libreoffice-style-galaxy (<< 1:${oover}~),
+ libreoffice-style-galaxy (>= 1:${next-oover}~),
+ libreoffice-style-hicontrast (<< 1:${oover}~),
+ libreoffice-style-hicontrast (>= 1:${next-oover}~),
+ libreoffice-style-tango,
+ libreoffice-writer2latex (<< 1.0.2-9),
+ libreoffice-writer2xhtml (<< 1.0.2-9),
+ libreoffice-base (<< 1:6.4.0~beta1-2~),
+ openclipart-libreoffice (<= 1:0.18+dfsg-17)
+Replaces: libreoffice-base (<< 1:6.4.0~beta1-2~),
+ libreoffice-pdfimport (<< 1:5.4~),
+ openclipart-libreoffice (<= 1:0.18+dfsg-17)
+Description: office productivity suite -- arch-independent files
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the architecture-independent files of
+ LibreOffice.
+
+Package: libreoffice-java-common
+Architecture: all
+Depends: libreoffice-common, ure-java, liblibreoffice-java, libunoloader-java, ${java:Depends}, ${misc:Depends}
+Breaks: libunoil-java (<< 1:6.4.0~rc1-6)
+Replaces: libunoil-java (<< 1:6.4.0~rc1-6)
+Description: office productivity suite -- arch-independent Java support files
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the architecture-independent files of
+ the Java support for LibreOffice (Java classes, scripts, config snippets).
+
+Package: libreoffice-help-common
+Architecture: all
+Depends: libreoffice-common, ${help-common-depends}, ${misc:Depends}
+Breaks: libreoffice-common (<< 1:6.1.0~alpha1-1)
+Replaces: libreoffice-common (<< 1:6.1.0~alpha1-1)
+Description: office productivity suite -- common files for LibreOffice help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the common files (e.g. language-independent, media) files
+ for the LibreOffice Help.
+
+Package: libreoffice-writer
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-base-core (= ${binary:Version})%OOO_NO_BASE_ARCHS%,
+ libreoffice-core (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: libreoffice-math,
+Suggests: fonts-crosextra-caladea,
+ fonts-crosextra-carlito,
+ libreoffice-base,
+ ${java-common-depends},
+ ${java-runtime-depends}
+Replaces: libreoffice-common (<< 1:6.4.2~rc1~)
+Breaks: libreoffice-common (<< 1:6.4.2~rc1~)
+Description: office productivity suite -- word processor
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the wordprocessor component for LibreOffice.
+
+Package: libreoffice-writer-nogui
+Architecture: %OOO_NOGUI_ARCHS%
+Depends: libreoffice-base-core (= ${binary:Version})%OOO_NO_BASE_ARCHS%,
+ libreoffice-core-nogui (= ${binary:Version}) | libreoffice-core (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: libreoffice-math-nogui,
+Suggests: fonts-crosextra-caladea,
+ fonts-crosextra-carlito,
+ libreoffice-base,
+ ${java-common-depends},
+ ${java-runtime-depends}
+Replaces: libreoffice-common (<< 1:6.4.2~rc1~), libreoffice-writer
+Breaks: libreoffice-common (<< 1:6.4.2~rc1~)
+Conflicts: libreoffice-writer
+Description: office productivity suite -- word processor (no GUI variant)
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the wordprocessor component for LibreOffice.
+
+Package: libreoffice-calc
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-base-core (= ${binary:Version})%OOO_NO_BASE_ARCHS%,
+ libreoffice-core (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${lpsolve-dep},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: ocl-icd-libopencl1 | mesa-opencl-icd | beignet-opencl-icd
+Replaces: libreoffice-common (<< 1:6.4.2~rc1~)
+Breaks: libreoffice-common (<< 1:6.4.2~rc1~)
+Description: office productivity suite -- spreadsheet
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the spreadsheet component for LibreOffice.
+
+Package: libreoffice-calc-nogui
+Architecture: %OOO_NOGUI_ARCHS%
+Depends: libreoffice-base-core (= ${binary:Version})%OOO_NO_BASE_ARCHS%,
+ libreoffice-core-nogui (= ${binary:Version}) | libreoffice-core (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${lpsolve-dep},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Replaces: libreoffice-common (<< 1:6.4.2~rc1~), libreoffice-calc
+Breaks: libreoffice-common (<< 1:6.4.2~rc1~)
+Conflicts: libreoffice-calc
+Description: office productivity suite -- spreadsheet (no GUI variant)
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the spreadsheet component for LibreOffice
+ for use with libreoffice-core-nogui.
+
+Package: libreoffice-impress
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ libreoffice-draw (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Replaces: libreoffice-common (<< 1:6.4.2~rc1~), libreoffice-ogltrans (<< 1:6.1.4-2~)
+Conflicts: libreoffice-ogltrans (<< 1:6.1.4-2~)
+Provides: libreoffice-ogltrans
+Breaks: libreoffice-common (<< 1:6.4.2~rc1~)
+Description: office productivity suite -- presentation
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the presentation component for LibreOffice.
+
+Package: libreoffice-impress-nogui
+Architecture: %OOO_NOGUI_ARCHS%
+Depends: libreoffice-core-nogui (= ${binary:Version}) | libreoffice-core (= ${binary:Version}),
+ libreoffice-draw-nogui (= ${binary:Version}) | libreoffice-draw (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Replaces: libreoffice-common (<< 1:6.4.2~rc1~), libreoffice-impress
+Conflicts: libreoffice-ogltrans (<< 1:6.1.4-2~), libreoffice-impress
+Breaks: libreoffice-common (<< 1:6.4.2~rc1~)
+Description: office productivity suite -- presentation (no GUI variant)
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the presentation component for LibreOffice.
+
+Package: libreoffice-draw
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Replaces: libreoffice-core (<< 1:6.4.1~rc1-3), libreoffice-impress (<< 1:5.2.0-2), libreoffice-common (<< 1:6.4.2~rc1~)
+Breaks: libreoffice-core (<< 1:6.4.1~rc1-3), libreoffice-impress (<< 1:5.2.0-2), libreoffice-common (<< 1:6.4.2~rc1~)
+Description: office productivity suite -- drawing
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the drawing component for LibreOffice.
+
+Package: libreoffice-draw-nogui
+Architecture: %OOO_NOGUI_ARCHS%
+Depends: libreoffice-core-nogui (= ${binary:Version}) | libreoffice-core (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Replaces: libreoffice-impress (<< 1:5.2.0-2), libreoffice-common (<< 1:6.4.2~rc1~), libreoffice-draw
+Breaks: libreoffice-impress (<< 1:5.2.0-2), libreoffice-common (<< 1:6.4.2~rc1~)
+Conflicts: libreoffice-draw
+Description: office productivity suite -- drawing (no GUI variant)
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the drawing component for LibreOffice.
+
+Package: libreoffice-math
+Architecture: %OOO_ARCHS%
+Depends: fonts-opensymbol (>= 2:102.11),
+ libreoffice-core (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Replaces: libreoffice-common (<< 1:6.4.2~rc1~)
+Breaks: libreoffice-common (<< 1:6.4.2~rc1~)
+Description: office productivity suite -- equation editor
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the equation editor component for LibreOffice.
+
+Package: libreoffice-math-nogui
+Architecture: %OOO_NOGUI_ARCHS%
+Depends: fonts-opensymbol (>= 2:102.11),
+ libreoffice-core-nogui (= ${binary:Version}) | libreoffice-core (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Replaces: libreoffice-common (<< 1:6.4.2~rc1~), libreoffice-math
+Conflicts: libreoffice-common (<< 1:6.4.2~rc1~), libreoffice-math
+Description: office productivity suite -- equation editor (no GUI variant)
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the equation editor component for LibreOffice.
+
+Package: libreoffice-base-core
+Architecture: %OOO_BASE_ARCHS%
+Depends: libreoffice-core-nogui (= ${binary:Version}) | libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: libreoffice-base
+Replaces: libreoffice-base-drivers (<< 1:6.1.1~rc1-2)
+Description: office productivity suite -- shared library
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains common libraries of LibreOffice Base used by
+ Base, Writer and Calc.
+ .
+ If you need full Base functionality (or actual database drivers), please
+ install libreoffice-base (and/or libreoffice-base-drivers and/o
+ libreoffice-sdbc-*).
+
+Package: libreoffice-base
+Architecture: %OOO_BASE_ARCHS%
+Section: database
+Pre-Depends: dpkg (>= 1.19.1)
+Depends: libreoffice-base-core (= ${binary:Version}),
+ libreoffice-base-drivers (= ${binary:Version}),
+ libreoffice-core (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: libreoffice-report-builder,
+ unixodbc,
+ python3-uno
+Recommends: libreoffice-writer, ${java-common-depends}, ${java-runtime-depends}
+Replaces: libreoffice-common (<< 1:6.4.2~rc1~)
+Breaks: libreoffice-common (<< 1:6.4.2~rc1~)
+Description: office productivity suite -- database
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the database component for LibreOffice.
+
+Package: libreoffice-base-nogui
+Architecture: %OOO_NOGUI_ARCHS%
+Section: database
+Depends: libreoffice-base-core (= ${binary:Version}),
+ libreoffice-base-drivers (= ${binary:Version}),
+ libreoffice-core-nogui (= ${binary:Version}) | libreoffice-core (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: libreoffice-report-builder,
+ unixodbc,
+ python3-uno
+Recommends: libreoffice-writer, ${java-common-depends}, ${java-runtime-depends}
+Replaces: libreoffice-common (<< 1:6.4.2~rc1~), libreoffice-base
+Breaks: libreoffice-common (<< 1:6.4.2~rc1~)
+Conflicts: libreoffice-base
+Description: office productivity suite -- database (no GUI variant)
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the database component for LibreOffice.
+
+Package: libreoffice-style-breeze
+Architecture: all
+Enhances: libreoffice-core
+Depends: libreoffice-style-colibre, ${misc:Depends}
+Suggests: breeze-icon-theme
+Provides: libreoffice-style
+Recommends: libreoffice-common
+Description: office productivity suite -- Breeze symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "breeze" symbol style, default style for KDE 5.
+
+Package: libreoffice-style-colibre
+Architecture: all
+Enhances: libreoffice-core
+Depends: ${misc:Depends}
+Provides: libreoffice-style
+Recommends: libreoffice-common
+Description: office productivity suite -- colibre symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "colibre" symbol style - a icon theme
+ which follow Microsoft(R) Offices color scheme.
+
+Package: libreoffice-style-sifr
+Architecture: all
+Enhances: libreoffice-core
+Depends: libreoffice-style-breeze, ${misc:Depends}
+Provides: libreoffice-style, libreoffice-style-hicontrast
+Replaces: libreoffice-style-hicontrast
+Conflicts: libreoffice-style-hicontrast
+Recommends: libreoffice-common
+Description: office productivity suite -- Sifr symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "sifr" symbol style (an adaption of the Gnome
+ symbolic theme), needs to be manually enabled in the LibreOffice option
+ menu.
+
+Package: libreoffice-style-elementary
+Architecture: all
+Depends: libreoffice-style-colibre, ${misc:Depends}
+Enhances: libreoffice-core
+Provides: libreoffice-style
+Recommends: libreoffice-common
+Description: office productivity suite -- Elementary symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "elementary" symbol style, default style
+ for GTK+/Gnome.
+
+Package: libreoffice-style-karasa-jaga
+Architecture: all
+Depends: ${misc:Depends}
+Enhances: libreoffice-core
+Provides: libreoffice-style
+Recommends: libreoffice-common
+Description: office productivity suite -- Karasa Jaga symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "karasa_jaga" symbol style.
+
+Package: libreoffice-style-sukapura
+Architecture: all
+Depends: ${misc:Depends}
+Enhances: libreoffice-core
+Provides: libreoffice-style
+Recommends: libreoffice-common
+Description: office productivity suite -- Sukapura symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "sukapura" symbol style.
+
+Package: libreoffice-gnome
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: ${gnome-gtk-recommends}, libreoffice-style-elementary
+Suggests: libreoffice-evolution, seahorse
+Section: gnome
+Enhances: libreoffice
+Provides: libreoffice-gtk-gnome
+Replaces: libreoffice-gtk (<< 1:5.0.0~rc2-1), libreoffice-gtk3 (<< 1:7.2.0~)
+Conflicts: libreoffice-gtk3 (<< 1:7.2.0~)
+Description: office productivity suite -- GNOME integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the GIO support.
+ .
+ You can extend the functionality of this by installing these packages:
+ .
+ * libreoffice-evolution: Evolution addressbook support
+ * evolution
+
+Package: python3-uno
+Section: python
+Architecture: %OOO_ARCHS%
+Enhances: libreoffice
+Depends: libreoffice-core-nogui (= ${binary:Version}) | libreoffice-core (= ${binary:Version}),
+ libreoffice-common (>= 1:7.0.0~alpha~),
+ ${misc:Depends},
+ ${python3:Depends},
+ ${shlibs:Depends}
+Conflicts: python-uno
+Replaces: libreoffice-core (= 1:4.3.0~beta1-1), libreoffice-common (<< 1:4.4.0~beta2)
+Build-Profiles: <!nopython>
+Description: Python-UNO bridge
+ The Python-UNO bridge allows use of the standard LibreOffice API
+ with the Python scripting language. It additionally allows
+ others to develop UNO components in Python, thus Python UNO components
+ may be run within the LibreOffice process and can be called from C++
+ or the built in StarBasic scripting language.
+Homepage: http://udk.openoffice.org/python/python-bridge.html
+
+Package: libreoffice-script-provider-python
+Architecture: all
+Section: python
+Depends: libreoffice-common,
+ libreoffice-core-nogui | libreoffice-core,
+ ${misc:Depends},
+ ${python3:Depends},
+ ${pyuno-depends}
+Build-Profiles: <!nopython>
+Description: Python script support provider for LibreOffice scripting framework
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The Scripting Framework allows LibreOffice users to write and run macros
+ in multiple languages including LibreOffice Basic, Python, Java, BeanShell
+ and JavaScript. These macros can then be assigned to menus, toolbars,
+ keyboard shortcuts, events and embedded objects.
+ .
+ This package contains the script provider to support Python.
+
+Package: libreoffice-script-provider-bsh
+Architecture: all
+Section: java
+Depends: libreoffice-common,
+ libreoffice-core-nogui | libreoffice-core,
+ ${java-common-depends},
+ liblibreoffice-java,
+ ${java:Depends},
+ ${java-runtime-depends},
+ ${misc:Depends}
+Description: BeanShell script support provider for LibreOffice scripting framework
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The Scripting Framework allows LibreOffice users to write and run macros
+ in multiple languages including LibreOffice Basic, Python, Java, BeanShell
+ and JavaScript. These macros can then be assigned to menus, toolbars,
+ keyboard shortcuts, events and embedded objects.
+ .
+ This package contains the script provider to support BeanShell.
+
+Package: libreoffice-script-provider-js
+Architecture: all
+Section: web
+Depends: libreoffice-common,
+ libreoffice-core-nogui | libreoffice-core,
+ ${java-common-depends},
+ liblibreoffice-java,
+ ${java:Depends},
+ ${java-runtime-depends},
+ ${misc:Depends}
+Description: JavaScript script support provider for LibreOffice scripting framework
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The Scripting Framework allows LibreOffice users to write and run macros
+ in multiple languages including LibreOffice Basic, Python, Java, BeanShell
+ and JavaScript. These macros can then be assigned to menus, toolbars,
+ keyboard shortcuts, events and embedded objects.
+ .
+ This package contains the script provider to support JavaScript.
+
+Package: libreoffice-sdbc-hsqldb
+Depends: libreoffice-core-nogui | libreoffice-core, ${java-common-depends}, ${java:Depends}, ${java-runtime-depends}, ${shlibs:Depends}, ${misc:Depends}
+Architecture: %OOO_JAVA_ARCHS%
+Section: database
+Enhances: libreoffice-base-drivers
+Description: HSQLDB SDBC driver for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The HSQLDB SDBC Driver allows one to use the HSQLDB embedded database from
+ LibreOffice without any wrapper layer such as ODBC or JDBC.
+
+Package: libreoffice-sdbc-mysql
+Section: database
+Architecture: %OOO_BASE_ARCHS%
+Depends: libreoffice-core-nogui | libreoffice-core, ${misc:Depends}, ${shlibs:Depends}
+Suggests: default-mysql-server | virtual-mysql-server
+Description: MariaDB/MySQL SDBC driver for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The MariaDB/MySQL driver allows one to use the MariaDB or MySQL
+ database from LibreOffice without any wrapper layer such as ODBC or JDBC.
+
+Package: libreoffice-base-drivers
+Depends: libreoffice-core-nogui | libreoffice-core, ${shlibs:Depends}, ${misc:Depends}
+Architecture: %OOO_BASE_ARCHS%
+Section: database
+Suggests: libreoffice-sdbc-postgresql | odbc-postgresql | libpg-java,
+ libreoffice-sdbc-mysql | libmyodbc | libmariadb-java,
+ libsqliteodbc | tdsodbc | odbc-mdbtools,
+ libjtds-java,
+Recommends: libreoffice-sdbc-hsqldb [%OOO_JAVA_ARCHS%], ${base-firebird-recommends}
+Replaces: libreoffice-base (<< 1:4.3.0-3), libreoffice-core (<< 1:6.2.0~beta1~)
+Breaks: libreoffice-base (<< 1:4.3.0-3)
+Description: Database connectivity drivers for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the database connectivity drivers used by LibreOffices
+ database functionality:
+ - ODBC
+ - JDBC
+ - dBase
+ - Calc
+ - Flat files
+ .
+ You can extend this by installing:
+ .
+ * unixodbc: ODBC database support
+ * libmyodbc | odbc-postgresql | libsqliteodbc | tdsodbc | odbc-mdbtools: ODBC
+ drivers for:
+ - MySQL
+ - PostgreSQL
+ - SQLite
+ - MS SQL / Sybase SQL
+ - *.mdb (JET / MS Access)
+ * libmariadb-java | libpg-java | libjtds-java: JDBC Drivers
+ for:
+ - MySQL/MariaDB
+ - PostgreSQL
+ - MS SQL Server and Sybase
+ * libreoffice-sdbc-hsqldb: embedded HSQLDB SDBC Driver
+ * libreoffice-sdbc-firebird: Firebird SDBC Driver
+ * libreoffice-sdbc-postgresql: PostgreSQL SDBC Driver
+ * libreoffice-sdbc-mysql: MySQL/MariaDB SDBC Driver
+
+Package: python3-access2base
+Section: python
+Architecture: all
+Homepage: http://www.access2base.com/access2base.html
+Depends: libreoffice-common (>= 1:6.4.0~beta1-2~), libreoffice-base, python3-uno, ${python3:Depends}, ${misc:Depends}
+Replaces: libreoffice-base
+Description: interface between Python and the LibreOffice Access2Base library
+ Access2Base is a LibreOffice/OpenOffice Basic library of macros for
+ (business or personal) application developers and advanced users.
+ .
+ Their syntax and their meaning are directly inspired by MSAccess.
+ The macros are callable from
+ - a LibreOffice / OpenOffice Base application,
+ - any LibreOffice / OpenOffice document wanting to access data
+ stored in databases.
+ .
+ This package contains an interface between Python (user) scripts
+ and Access2Base.
+
+Package: libofficebean-java
+Section: java
+Depends: liblibreoffice-java,
+ ${java-runtime-depends},
+ ${java:Depends},
+ ${shlibs:Depends},
+ ${misc:Depends}
+Recommends: libreoffice-core-nogui | libreoffice-core
+Architecture: %OOO_JAVA_ARCHS%
+Replaces: libreoffice-officebean (<< 1:6.4.0~rc2-1)
+Breaks: libreoffice-officebean (<< 1:6.4.0~rc2-1)
+Description: generic Java Bean wrapper for LibreOffice components
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the Java library for the LibreOffice Office Bean
+ for embedding LibreOffice in custom Java applications.
+
--- /dev/null
+Package: libreoffice-kf5
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${kf5-qt5-depends},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: ${plasma-iconset-dep}
+Replaces: libreoffice-kde (<< 1:6.1.0~alpha1-1)
+Section: kde
+Enhances: libreoffice
+Description: office productivity suite -- KDE Frameworks 5 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the KF5 plugin for LibreOffice and a KF5-based File
+ Picker when running under Plasma.
+
--- /dev/null
+Package: libreoffice-l10n-@LCODE@
+Section: localization
+Architecture: all
+Depends: libreoffice-common (>= 1:7.0.0~alpha~), ${misc:Depends}, @LOCALES_DEPENDS@
+Recommends: libreoffice-core (>> ${base-version}) @FONT_RECOMMENDS@
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-@LCODE@ | myspell-dictionary-@LCODE@,
+ hyphen-@LCODE@,
+ libreoffice-grammarcheck-@LCODE@,
+ libreoffice-help-@LCODE@,
+ mythes-@LCODE@
+Description: office productivity suite -- @LNAME@ language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ @LNAME@.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
--- /dev/null
+Package: libreoffice-librelogo
+Section: misc
+Architecture: all
+Depends: libreoffice-core,
+ libreoffice-writer,
+ libreoffice-script-provider-python,
+ libreoffice-common (>= 1:7.0.0~alpha),
+ ${misc:Depends}
+Build-Profiles: <!nopython>
+Homepage: http://librelogo.org
+Description: Logo-like programming language for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains Librelogo, which is a pyuno-based Logo-like programming
+ language with interactive vectorgraphics for education and DTP
+ - basic Logo syntax for back compatibility with educational Logo systems
+ - interactive vectorgraphics in LibreOffice Writer
+ - native commands (easily translatable)
+ - Python data structures (list, tuple, set, dictionary) and other Python
+ features
+
--- /dev/null
+Package: libreofficekit-dev
+Section: libdevel
+Architecture: %OOO_ARCHS%
+Depends: ${misc:Depends}, gir1.2-lokdocview-0.1 (= ${binary:Version})
+Suggests: libgtk-3-dev
+Recommends: libreoffice-core, libreofficekit-data
+Replaces: gir1.2-lokdocview-0.1 (<< 1:5.4.0~rc1)
+Description: LibreOfficeKit -- headers
+ LibreOfficeKit can be used for accessing LibreOffice functionality through
+ C/C++, without any need to use UNO.
+ .
+ For now it only offers document conversion (in addition to an experimental
+ tiled rendering API).
+ .
+ This package contains the headers needed for using LibreOfficeKit.
+
--- /dev/null
+Package: libreoffice-wiki-publisher
+Section: misc
+Architecture: all
+Depends: libreoffice-core,
+ liblibreoffice-java,
+ ${java-common-depends},
+ ${java:Depends},
+ ${java-runtime-depends},
+ ${misc:Depends}
+Enhances: libreoffice-writer
+Suggests: mediawiki
+Description: LibreOffice extension for working with MediaWiki articles
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains an extension to create/edit/publish MediaWiki
+ articles with LibreOffice
+
--- /dev/null
+Package: libreoffice-nlpsolver
+Architecture: all
+Depends: ${misc:Depends}, libreoffice-calc, libreoffice-core, liblibreoffice-java, ${java-common-depends}, ${java-runtime-depends}
+Section: math
+Description: "Solver for Nonlinear Programming" extension for LibreOffice
+ By default LibreOffice Calc ships with a solver engine for linear
+ programming only. This allows the optimization of models to a certain degree.
+ However, if the formulas or constraints become more complex,
+ nonlinear programming is required. That missing gap is now filled by the
+ Solver for Nonlinear Programming extension.
+ .
+ Currently it incorporates two Evolutionary Algorithms which are able to
+ handle floating point and integer variables as well as nonlinear constraints.
+
--- /dev/null
+Package: libreoffice-plasma
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: libreoffice-kf5
+Replaces: libreoffice-kde5 (<< 1:6.4.0~)
+Description: office productivity suite -- some Plasma integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains some minor Plasma integration (like AppData
+ and "Create New..." integration) and a KDE/KF5 configuration backend.
+
--- /dev/null
+Package: libreoffice-sdbc-postgresql
+Section: misc
+Architecture: %OOO_BASE_ARCHS%
+Depends: libreoffice-core,
+ libreoffice-common (>= 1:7.0.0~alpha),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: postgresql (>= 8.4)
+Enhances: libreoffice-base-drivers
+Description: PostgreSQL SDBC driver for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The PostgreSQL SDBC Driver allows one to use the PostgreSQL database from
+ LibreOffice without any wrapper layer such as ODBC or JDBC.
+Homepage: http://wiki.documentfoundation.org/PostgreSQL-SDBC
+
--- /dev/null
+Package: libreoffice-qt5
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: qtgstreamer-plugins-qt5
+Enhances: libreoffice
+Description: office productivity suite -- Qt 5 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the Qt 5 plugin for drawing LibreOffices widgets
+ with Qt 5 and a Qt File Picker and print dialog.
+ .
+ You need to enable it manually by export SAL_USE_VCLPLUGIN=qt5 if you are
+ not using Plasma.
+
--- /dev/null
+Package: libreoffice-qt6
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Enhances: libreoffice
+Description: office productivity suite -- Qt 6 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the Qt 6 plugin for drawing LibreOffices widgets
+ with Qt 6 and a Qt File Picker and print dialog.
+ .
+ You need to enable it manually by export SAL_USE_VCLPLUGIN=qt6.
+
--- /dev/null
+Package: libreoffice-report-builder
+Section: misc
+Architecture: all
+Depends: libreoffice-core | libreoffice-core-nogui,
+ libreoffice-report-builder-bin (>= ${base-version}),
+ libreoffice-common (>= 1:7.0.0~alpha),
+ liblibreoffice-java,
+ ${java:Depends},
+ ${java-common-depends},
+ ${misc:Depends},
+ ${report-builder-jar-depends}
+Provides: libreoffice-reportdesigner
+Enhances: libreoffice-base
+Breaks: libreoffice-common (<< 1:6.4.2~rc1~)
+Replaces: libreoffice-common (<< 1:6.4.2~r~~)
+Description: LibreOffice component for building database reports
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the report builder:
+ "Create with the Sun Report Builder stylish, smart-looking database reports.
+ The flexible report editor can define group and page headers as well as
+ group and page footers and even calculation fields are available to
+ accomplish complex database reports."
+
+Package: libreoffice-report-builder-bin
+Section: misc
+Architecture: %OOO_REPORTBUILDER_ARCHS%
+Depends: libreoffice-core,
+ libreoffice-base,
+ ${misc:Depends},
+ ${shlibs:Depends}
+Description: LibreOffice component for building database reports -- libraries
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains some architecture-dependent support libraries
+ (librpt*.so) for the report builder component.
+
+Package: libreoffice-report-builder-bin-nogui
+Section: misc
+Architecture: %OOO_REPORTBUILDER_ARCHS%
+Depends: libreoffice-core-nogui | libreoffice-core,
+ libreoffice-base-nogui | libreoffice-base,
+ ${misc:Depends},
+ ${shlibs:Depends}
+Conflicts: libreoffice-report-builder-bin
+Replaces: libreoffice-report-builder-bin
+Description: LibreOffice component for building database reports -- libraries (no GUI variant)
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains some architecture-dependent support libraries
+ (librpt*.so) for the report builder component.
+
--- /dev/null
+Package: libreoffice-dev
+Section: devel
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core-nogui (= ${binary:Version}) | libreoffice-core (= ${binary:Version}),
+ libreoffice-dev-common (= ${source:Version}),
+ ${idlc-cpp-depends},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: g++, ${java-common-depends}, ${java-runtime-depends}
+Suggests: libmythes-dev, libreofficekit-dev, libreoffice-dev-doc
+Replaces: libreoffice-dev-common (<< 1:5.4.1~)
+Conflicts: libreoffice-dev-doc (<< 1:5.2.5-2~), libreoffice (<< 1:5.2.5-2~)
+Breaks: libreoffice-dev-common (<< 1:5.4.1~)
+Description: office productivity suite -- SDK -- architecture-dependent parts
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the (architecture-dependent) files needed to build
+ plugins/add-ons for LibreOffice (build tools, libraries, arch-dependent
+ includes, ...).
+
+Package: libreoffice-dev-gui
+Section: devel
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ libreoffice-dev (= ${binary:Version}),
+ libreoffice-dev-common (= ${source:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Replaces: libreoffice-dev (<< 1:7.0.0~)
+Breaks: libreoffice-dev (<< 1:7.0.0~)
+Description: office productivity suite -- "GUI" development stuff
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the gengal utility which was moved from
+ libreoffice-dev.
+
+Package: libreoffice-dev-common
+Section: devel
+Architecture: all
+Depends: ${misc:Depends}
+Replaces: libreoffice-dev (<< 1:5.2.0~)
+Breaks: libreoffice-dev (<< 1:5.2.0~)
+Conflicts: libreoffice (<< 1:5.2.5-2~)
+Description: office productivity suite -- SDK -- architecture-independent parts
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the (architecture-independent) files needed to build
+ plugins/add-ons for LibreOffice (includes, IDL files, ...)
+
+Package: libreoffice-dev-doc
+Section: doc
+Architecture: all
+Depends: ${misc:Depends}
+Recommends: libreoffice-dev (= ${binary:Version}),
+ www-browser
+Conflicts: openoffice.org-dev-doc, libreoffice-dev (<= 1:5.0.3~rc1-2), libreoffice (<< 1:5.2.5-2~)
+Build-Profiles: <!nodoc>
+Description: office productivity suite -- SDK documentation
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the documentation of the LibreOffice SDK:
+ .
+ * C++/Java API reference
+ * IDL reference
+ * C++/Java/Basic examples
+
--- /dev/null
+Package: libreoffice-subsequentcheckbase
+Section: libs
+Architecture: all
+Depends: liblibreoffice-java, ${java:Depends}, ${misc:Depends}
+Build-Profiles: <!noinsttest>
+Description: LibreOffice java test libraries
+ Java libraries LibreOffice subsequentchecks integration test suite
+
+Package: libreoffice-smoketest-data
+Section: misc
+Depends: ${misc:Depends}
+Architecture: all
+Build-Profiles: <!noinsttest>
+Replaces: libreoffice-java-common (<< 1:6.4.0~rc1-6)
+Breaks: libreoffice-java-common (<< 1:6.4.0~rc1-6)
+Description: data files for LibreOffices "smoketest"
+ Data files for the LibreOffice "smoketest".
+
--- /dev/null
+Package: uno-libs-private
+Section: libs
+Architecture: %OOO_ARCHS%
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Replaces: uno-libs3
+Breaks: uno-libs3
+Description: LibreOffice UNO runtime environment -- private libraries used by public ones
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ It offers you a flexible, low-overhead component model that is most ideal
+ for (but not limited to) combining in one application components written in
+ different computer languages, and developed by different parties. You can use
+ it to create any kind of application, in whatever application domain you can
+ imagine.
+ .
+ This package contains some private UNO/URE libraries which are used by public
+ ones (e.g. cppu).
+
+Package: libuno-sal3
+Section: libs
+Architecture: %OOO_ARCHS%
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Replaces: ure (<< 5.0.0~rc2-1), uno-libs3
+Breaks: libreoffice-core (<< 1:4.3.0~), uno-libs3
+Description: LibreOffice UNO runtime environment -- SAL public library
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ It offers you a flexible, low-overhead component model that is most ideal
+ for (but not limited to) combining in one application components written in
+ different computer languages, and developed by different parties. You can use
+ it to create any kind of application, in whatever application domain you can
+ imagine.
+ .
+ This package contains the System Abstraction Layer (SAL) library.
+
+Package: libuno-salhelpergcc3-3
+Section: libs
+Architecture: %OOO_ARCHS%
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Replaces: ure (<< 5.0.0~rc2-1), uno-libs3
+Breaks: libreoffice-core (<< 1:4.3.0~), uno-libs3
+Description: LibreOffice UNO runtime environment -- SAL helpers for C++ library
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ It offers you a flexible, low-overhead component model that is most ideal
+ for (but not limited to) combining in one application components written in
+ different computer languages, and developed by different parties. You can use
+ it to create any kind of application, in whatever application domain you can
+ imagine.
+ .
+ This package contains C++ helpers to make use of sal easier.
+
+Package: libuno-cppu3
+Section: libs
+Architecture: %OOO_ARCHS%
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Replaces: ure (<< 5.0.0~rc2-1), uno-libs3
+Breaks: libreoffice-core (<< 1:4.3.0~), uno-libs3
+Description: LibreOffice UNO runtime environment -- CPPU public library
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ It offers you a flexible, low-overhead component model that is most ideal
+ for (but not limited to) combining in one application components written in
+ different computer languages, and developed by different parties. You can use
+ it to create any kind of application, in whatever application domain you can
+ imagine.
+ .
+ This package contains CPPU, the type definitions/implementations for the core
+ of UNO.
+
+Package: libuno-cppuhelpergcc3-3
+Section: libs
+Architecture: %OOO_ARCHS%
+Depends: ${misc:Depends}, ${shlibs:Depends}, uno-libs-private (= ${binary:Version})
+Replaces: ure (<< 5.0.0~rc2-1), uno-libs3
+Breaks: libreoffice-core (<< 1:4.3.0~), uno-libs3
+Description: LibreOffice UNO runtime environment -- CPPU helper library
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ It offers you a flexible, low-overhead component model that is most ideal
+ for (but not limited to) combining in one application components written in
+ different computer languages, and developed by different parties. You can use
+ it to create any kind of application, in whatever application domain you can
+ imagine.
+ .
+ This package contains the cppuhelper library (helpers for using cppu in C++,
+ e.g. templates for implementing UNO components, bootstrapping stuff)
+
+Package: libuno-purpenvhelpergcc3-3
+Section: libs
+Architecture: %OOO_ARCHS%
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Replaces: ure (<< 5.0.0~rc2-1), uno-libs3
+Breaks: libreoffice-core (<< 1:4.3.0~), uno-libs3
+Description: LibreOffice UNO runtime environment -- "purpose environment" helper
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ It offers you a flexible, low-overhead component model that is most ideal
+ for (but not limited to) combining in one application components written in
+ different computer languages, and developed by different parties. You can use
+ it to create any kind of application, in whatever application domain you can
+ imagine.
+ .
+ This package contains a library which contains a helper for implementing
+ so-called "purpose environments".
+
+Package: ure
+Section: libs
+Architecture: %OOO_ARCHS%
+Depends: ${misc:Depends}, ${shlibs:Depends}, uno-libs-private (= ${binary:Version})
+Replaces: libreoffice-common (<< 1:4.5.0), libreoffice-core (<< 1:5.3.0~beta1~), libjuh-java (<< 1:6.4.0~rc1-6), libridl-java (<< 1:6.4.0~rc1-6), libunoloader-java (<< 1:6.4.0~rc1-6), libjurt-java (<< 1:6.4.0~rc1-6), ure-java (<< 1:7.1.1~rc2-1)
+Breaks: libreoffice-core (<< 1:7.4.0~), libreoffice-core-nogui (<< 1:7.4.0~), libreoffice-common (<< 1:4.5.0), libjuh-java (<< 1:6.4.0~rc1-6), libridl-java (<< 1:6.4.0~rc1-6), libunoloader-java (<< 1:6.4.0~rc1-6), libjurt-java (<< 1:6.4.0~rc1-6), ure-java (<< 1:7.1.1~rc2-1)
+Description: LibreOffice UNO runtime environment
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ It offers you a flexible, low-overhead component model that is most ideal
+ for (but not limited to) combining in one application components written in
+ different computer languages, and developed by different parties. You can use
+ it to create any kind of application, in whatever application domain you can
+ imagine.
+
+Package: ure-java
+Section: java
+Architecture: %OOO_ARCHS%
+Depends: ${misc:Depends}, ${shlibs:Depends}, ${java:Depends}, uno-libs-private (= ${binary:Version}), ure (= ${binary:Version}), libunoloader-java
+Recommends: liblibreoffice-java, ${java-runtime-depends}
+Replaces: ure (<< 1:7.1.0~)
+Breaks: ure (<< 1:7.1.0~)
+Description: LibreOffice UNO runtime environment -- Java support
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ It offers you a flexible, low-overhead component model that is most ideal
+ for (but not limited to) combining in one application components written in
+ different computer languages, and developed by different parties. You can use
+ it to create any kind of application, in whatever application domain you can
+ imagine.
+ .
+ This package contains the Java support in the URE.
+
+Package: libunoloader-java
+Architecture: all
+Section: java
+Depends: ${java:Depends}, ${misc:Depends}
+Replaces: ure (<< 6.4.0~rc1-6)
+Breaks: ure (<< 6.4.0~rc1-6)
+Description: LibreOffice UNO runtime environment -- (Java) UNO loader
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ This package contains a UNO loader library for Java.
+
+Package: liblibreoffice-java
+Architecture: all
+Section: java
+Depends: ure-java, libunoloader-java, ${java:Depends}, ${misc:Depends}
+Provides: libjuh-java, libridl-java, libjurt-java, libunoil-java
+Replaces: libjuh-java (<< 1:7.1.0~), libridl-java (<< 1:7.1.0~), libjurt-java (<< 1:7.1.0~), libunoil-java (<< 1:7.1.0~)
+Breaks: libjuh-java (<< 1:7.1.0~), libridl-java (<< 1:7.1.0~), libjurt-java (<< 1:7.1.0~), libunoil-java (<< 1:7.1.0~)
+Description: LibreOffice UNO runtime environment -- Java library
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ This package contains the public Java libraries.
+
--- /dev/null
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: LibreOffice
+Upstream-Contact: libreoffice@lists.freedesktop.org
+Source: http://download.documentfoundation.org/libreoffice/src
+# they are already removed when packing the upstream tarballs, but are in git...
+#Files-Excluded: schema/*/*
+
+Files: *
+Copyright: Copyright 2000, 2010 Oracle and/or its affiliates.
+ Copyright (c) 2000, 2010 LibreOffice contributors and/or their affiliates.
+License: MPL-2.0
+ On Debian systems the full text of the MPL-2.0 can be found in
+ /usr/share/common-licenses/MPL-2.0.
+ .
+ Some files include Apache-2.0 licensed material:
+ .
+ # This file incorporates work covered by the following license notice:
+ #
+ # Licensed to the Apache Software Foundation (ASF) under one or more
+ # contributor license agreements. See the NOTICE file distributed
+ # with this work for additional information regarding copyright
+ # ownership. The ASF licenses this file to you under the Apache
+ # License, Version 2.0 (the "License"); you may not use this file
+ # except in compliance with the License. You may obtain a copy of
+ # the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ .
+ On Debian systems the full text of the Apache-2.0 license can be found in
+ /usr/share/common-licenses/Apache-2.0.
+
+Files: extras/source/truetype/symbol/OpenSymbol.sfd
+Copyright: (c) 2009 Sun Microsystems Inc.
+ (c) 2010 Google Corporation
+ (c) 2011 Julien Nabet
+ (c) 2011 Olivier Hallot
+ (c) 2013 Mathias Hasselmann
+ (c) 2015 Khaled Hosny
+ (c) 2016 Mike Kaganski
+License: MPL-2.0
+ On Debian systems the full text of the MPL-2.0 can be found in
+ /usr/share/common-licenses/MPL-2.0.
+ .
+ Some files include Apache-2.0 licensed material:
+ .
+ # This file incorporates work covered by the following license notice:
+ #
+ # Licensed to the Apache Software Foundation (ASF) under one or more
+ # contributor license agreements. See the NOTICE file distributed
+ # with this work for additional information regarding copyright
+ # ownership. The ASF licenses this file to you under the Apache
+ # License, Version 2.0 (the "License"); you may not use this file
+ # except in compliance with the License. You may obtain a copy of
+ # the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ .
+ On Debian systems the full text of the Apache-2.0 license can be found in
+ /usr/share/common-licenses/Apache-2.0.
+
+Files: swext/mediawiki/src/filter/odt2mediawiki.xsl
+Copyright: Copyright (C) 2007-2013 Bernhard Haumacher (haui@haumacher.de)
+License: Apache-2.0
+
+Files: sysui/desktop/apparmor/*
+Copyright: Copyright (C) 2016 Canonical Ltd.
+ Copyright (C) 2017 Software in the Public Interest, Inc.
+License: MPL-2.0
+
+Files: sysui/desktop/appstream-appdata/*.xml
+Copyright: Copyright (c) 2013-2019 LibreOffice contributors and/or their affiliates.
+License: CC0-1.0
+
+Files: icon-themes/breeze*/*
+Copyright: Copyright 2014 Uri Herrera <kaisergreymon99@gmail.com>
+ Copyright 2015 Andreas Kainz <kainz.a@gmail.com> and other contributors
+License: GPL-2+
+
+Files: icon-themes/sifr*/*
+Copyright: Jakub Steiner <jimmac@novell.com>
+ Lapo Calamandrei <calamandrei@gmail.com>
+ Hylke Bons <hylke.bons@intel.com>
+ Barbara Muraus <barbara.muraus@gmail.com>
+ Issa Alkurtass <ialkurtass@kacst.edu.sa>
+ Norah Abanumay <nabanimy@kacst.edu.sa>
+ Copyright 2017-2018 Matthias Freund <matti_lx@mailbox.org>
+License: CC-BY-SA-3.0
+
+Files: icon-themes/elementary*/*
+Copyright: Copyright 2015 by Simon Steinbeiss <simon@xfce.org>, Pasi Lallinaho <pasi@shimmerproject.org>
+License: GPL-3+
+
+Files: icon-themes/colibre*/*
+Copyright: Copyright 2018 Andreas Kainz <kainz.a@gmail.com>
+License: CC0-1.0
+
+https://github.com/rizmut/libreoffice-style-karasa-jaga/blob/master/COPYING
+Files: icon-themes/karasa_jaga/*
+Copyright: Copyright (c) 2014 Rizal Muttaqin <sundaralinux@gmail.com>
+License: LGPL-3+
+
+Files: icon-themes/sukapura*/*
+Copyright: Copyright (c) 2019-2020 Rizal Muttaqin <riz_17_oke@yahoo.co.id>
+License: MPL-2.0
+
+Files: helpcontent2/help3xsl/normalize.css
+Copyright: Copyright © Nicolas Gallagher and Jonathan Neal
+License: Expat
+
+Files: helpcontent2/help3xsl/prism.js
+Copyright: Copyright (c) Lea Verou <https://lea.verou.me>
+License: MIT
+
+Files: helpcontent2/help3xsl/prism.css
+Copyright: Copyright (c) Tim Shedor
+License: MIT
+
+Files: debian/*
+Copyright: Copyright (C) 2002-2009 Software in the Public Interest, Inc.
+License: GPL-2
+
+Files: debian/templates/debian-presentation.otp
+Copyright: Copyright (C) 2010 Raphaël Hertzog
+License: GPL-2+
+
+Files: debian/templates/debian-presentation-background.xcf
+Copyright: Copyright Alexis Younes "ayo"
+License: GPL-2+
+
+Files: tarballs/dtoa*
+Copyright: Copyright (c) 1991, 2000, 2001 by Lucent Technologies.
+License: Expat
+
+# https://github.com/google/skia/blob/master/LICENSE
+Files: tarballs/skia*
+Copyright: Copyright (c) 2011 Google Inc.
+License: BSD-3-clause
+
+Files: tarballs/*rhino*
+Copyright: Copyright (C) 1997-2000 Netscape Communications Corporation
+ Copyright (C) 2000 See Beyond Communications Corporation
+License: MPL-1.1 or GPL-2 or LGPL-2
+
+Files: tarballs/*xsltml*
+Copyright: Copyright (C) 2001-2003 Vasil Yaroshevich
+License: other
+ Permission is hereby granted, free of charge, to any person
+ obtaining a copy of this software and associated documentation
+ files (the ``Software''), to deal in the Software without
+ restriction, including without limitation the rights to use,
+ copy, modify, merge, publish, distribute, sublicense, and/or
+ sell copies of the Software, and to permit persons to whom the
+ Software is furnished to do so, subject to the following
+ conditions:
+ .
+ The above copyright notice and this permission notice shall be
+ included in all copies or substantial portions of the Software.
+ .
+ Except as contained in this notice, the names of individuals
+ credited with contribution to this software shall not be used in
+ advertising or otherwise to promote the sale, use or other
+ dealings in this Software without prior written authorization
+ from the individuals in question.
+ .
+ Any stylesheet derived from this Software that is publically
+ distributed will be identified with a different name and the
+ version strings in any derived Software will be changed so that
+ no possibility of confusion between the derived package and this
+ Software will exist.
+
+Files: tarballs/*swingEx*
+Copyright: Copyright 2008 by Sun Microsystems, Inc.
+License: LGPL-3
+ On Debian systems the full text of the LGPL-3 can be found in
+ /usr/share/common-licenses/LGPL-3
+
+Files: tarballs/pdfium*
+Copyright: // Copyright 2014-2016 PDFium Authors.
+ // Original code copyright 2014 Foxit Software Inc.
+License: other
+ // Redistribution and use in source and binary forms, with or without
+ // modification, are permitted provided that the following conditions are
+ // met:
+ //
+ // * Redistributions of source code must retain the above copyright
+ // notice, this list of conditions and the following disclaimer.
+ // * Redistributions in binary form must reproduce the above
+ // copyright notice, this list of conditions and the following disclaimer
+ // in the documentation and/or other materials provided with the
+ // distribution.
+ // * Neither the name of Google Inc. nor the names of its
+ // contributors may be used to endorse or promote products derived from
+ // this software without specific prior written permission.
+ //
+ // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Files: debian/patches/add-access2base-doc.diff wizards/source/access2base/access2base.html
+Copyright: Copyright (c) Jeremy Ruston 2004-2007
+ Copyright (c) UnaMesa Association 2007-2012
+License: other
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+ .
+ Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+ .
+ Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+ .
+ Neither the name of the UnaMesa Association nor the names of its contributors may be
+ used to endorse or promote products derived from this software without specific
+ prior written permission.
+ .
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ DAMAGE.
+
+Files: helpcontent2/help3xsl/polyfills.js
+Copyright: Copyright (c) 2016-present, jszhou
+License: MIT
+
+Files: helpcontent2/help3xsl/polyfills.js
+Copyright: Copyright (C) 2015 Larry Davis
+License: BSD-2-clause
+
+License: Expat
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+ .
+ The above copyright notice and this permission notice shall be
+ included in all copies or substantial portions of the Software.
+ .
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+License: MPL-2.0
+ On Debian systems the full text of the MPL-2.0 can be found in
+ /usr/share/common-licenses/MPL-2.0.
+
+License: Apache-2.0
+ On Debian systems the full text of the Apache-2.0 license can be found in
+ /usr/share/common-licenses/Apache-2.0.
+
+License: GPL-2+
+ On Debian systems the full text of the GPL-2 can be found in
+ /usr/share/common-licenses/GPL-2
+
+License: GPL-3+
+ On Debian systems the full text of the GPL-3 can be found in
+ /usr/share/common-licenses/GPL-3
+
+License: GPL-2
+ On Debian systems the full text of the GPL-2 can be found in
+ /usr/share/common-licenses/GPL-2
+
+License: MPL-1.1
+ On Debian systems the full text of the MPL-1.1 can be found in
+ /usr/share/common-licenses/MPL-1.1
+
+License: LGPL-2
+ On Debian systems the full text of the LGPL-2 can be found in
+ /usr/share/common-licenses/LGPL-2
+
+License: LGPL-3+
+ On Debian systems the full text of the LGPL-3 can be found in
+ /usr/share/common-licenses/LGPL-3
+
+License: CC0-1.0
+ On Debian systems the full text of the CC0-1.0 license can be found in
+ /usr/share/common-licenses/CC0-1.0
+
+
--- /dev/null
+symlink_to_dir /usr/share/doc/gir1.2-lokdocview-0.1 /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+liblibreoffice-java: codeless-jar [usr/share/java/juh-*.jar]
+liblibreoffice-java: codeless-jar [usr/share/java/jurt-*.jar]
+liblibreoffice-java: codeless-jar [usr/share/java/ridl-*.jar]
+liblibreoffice-java: codeless-jar [usr/share/java/unoil-*.jar]
+liblibreoffice-java: classpath-contains-relative-path ../ [usr/share/java/libreoffice-*.jar]
--- /dev/null
+# List of POM files for the package
+# Format of this file is:
+# <path to pom file> [option]*
+# where option can be:
+# --ignore: ignore this POM and its artifact if any
+# --ignore-pom: don't install the POM. To use on POM files that are created
+# temporarily for certain artifacts such as Javadoc jars. [mh_install, mh_installpoms]
+# --no-parent: remove the <parent> tag from the POM
+# --package=<package>: an alternative package to use when installing this POM
+# and its artifact
+# --has-package-version: to indicate that the original version of the POM is the same as the upstream part
+# of the version for the package.
+# --keep-elements=<elem1,elem2>: a list of XML elements to keep in the POM
+# during a clean operation with mh_cleanpom or mh_installpom
+# --artifact=<path>: path to the build artifact associated with this POM,
+# it will be installed when using the command mh_install. [mh_install]
+# --java-lib: install the jar into /usr/share/java to comply with Debian
+# packaging guidelines
+# --usj-name=<name>: name to use when installing the library in /usr/share/java
+# --usj-version=<version>: version to use when installing the library in /usr/share/java
+# --no-usj-versionless: don't install the versionless link in /usr/share/java
+# --dest-jar=<path>: the destination for the real jar.
+# It will be installed with mh_install. [mh_install]
+# --classifier=<classifier>: Optional, the classifier for the jar. Empty by default.
+# --site-xml=<location>: Optional, the location for site.xml if it needs to be installed.
+# Empty by default. [mh_install]
+#
+debian/pom.juh.xml --no-parent --has-package-version
+debian/pom.jurt.xml --no-parent --has-package-version
+debian/pom.ridl.xml --no-parent --has-package-version
+debian/pom.unoil.xml --no-parent --has-package-version
+debian/pom.libreoffice.xml --no-parent --has-package-version
--- /dev/null
+usr/lib/libreoffice/program/liblibreofficekitgtk.so usr/lib/liblibreofficekitgtk.so
--- /dev/null
+symlink_to_dir /usr/share/doc/liblibreofficekitgtk /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+# List of POM files for the package
+# Format of this file is:
+# <path to pom file> [option]*
+# where option can be:
+# --ignore: ignore this POM and its artifact if any
+# --ignore-pom: don't install the POM. To use on POM files that are created
+# temporarily for certain artifacts such as Javadoc jars. [mh_install, mh_installpoms]
+# --no-parent: remove the <parent> tag from the POM
+# --package=<package>: an alternative package to use when installing this POM
+# and its artifact
+# --has-package-version: to indicate that the original version of the POM is the same as the upstream part
+# of the version for the package.
+# --keep-elements=<elem1,elem2>: a list of XML elements to keep in the POM
+# during a clean operation with mh_cleanpom or mh_installpom
+# --artifact=<path>: path to the build artifact associated with this POM,
+# it will be installed when using the command mh_install. [mh_install]
+# --java-lib: install the jar into /usr/share/java to comply with Debian
+# packaging guidelines
+# --usj-name=<name>: name to use when installing the library in /usr/share/java
+# --usj-version=<version>: version to use when installing the library in /usr/share/java
+# --no-usj-versionless: don't install the versionless link in /usr/share/java
+# --dest-jar=<path>: the destination for the real jar.
+# It will be installed with mh_install. [mh_install]
+# --classifier=<classifier>: Optional, the classifier for the jar. Empty by default.
+# --site-xml=<location>: Optional, the location for site.xml if it needs to be installed.
+# Empty by default. [mh_install]
+#
+debian/pom.officebean.xml --no-parent --has-package-version
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-avmedia-backend-gstreamer /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-base-core /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+libreoffice (1:6.2.0~beta1-1) unstable; urgency=low
+
+ * The JDBC Driver used for JDBC Access by the LibreOffice MySQL driver
+ (NOT libreoffice-mysql-connector) contained in this package has been
+ changed from MySQL to MariaDB (libmysql-java -> libmariadb-java). See
+ http://bugs.debian.org/913360 and https://bugs.debian.org/912916.
+
+ This also involves changing the classes used in the code, so using
+ libmysql-java and com.mysql.jdbc.Driver does not work anymore.
+
+ If you want to connect to MySQL or MariaDB databases over JDBC, use
+ libmariadb-java.
+
+ -- Rene Engelhard <rene@debian.org> Fri, 16 Nov 2018 19:35:22 +0100
--- /dev/null
+# "aged out" due to debhelpers changelog trimming (see #1021502)
+libreoffice-base-drivers: debian-news-entry-has-unknown-version 1:6.2.0~beta1-1 [usr/share/doc/libreoffice-base-drivers/NEWS.Debian.gz:1]
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-base-drivers /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+report-with: libreoffice-core libreoffice-core-nogui
+package-status: unixodbc libmyodbc odbc-postgresql libsqliteodbc tdsodbc mdbtools libmariadb-java libmysql-java libpg-java libsapdbc-java
--- /dev/null
+###
+# shared-mime-info
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.database; soffice --nologo --base %s; edit=soffice --nologo --base %s; print=soffice --nologo --base -p %s; test=test -n "$DISPLAY"; description="OpenDocument Database"; nametemplate=%s.odb; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.base; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; description="OpenOffice.org Database"; nametemplate=%s.sdb; priority=8
+
+#
+###
--- /dev/null
+/usr/lib/libreoffice/share/.registry/base.xcd /etc/libreoffice/registry/base.xcd
--- /dev/null
+libreoffice (1:4.2.1-1) experimental; urgency=low
+
+ * the database drivers have been split out to a new libreoffice-base-drivers
+ package. This package depends on most of them, but that explicitly
+ _does not_ include the HSQLDB SDBC Driver or the new Firebird SDBC Driver
+ (both for the embedded database) - whose because of their dependencies are
+ split into extra packages.
+ .
+ If you used a "normal" embedded database in your (old) database file you
+ _must_ install libreoffice-sdbc-hsqldb so that it can "connect" to it.
+ .
+ Similar with the new Firebird embedded database in 4.2 and -sdbc-firebird.
+
+ -- Rene Engelhard <rene@debian.org> Fri, 16 Aug 2013 10:21:53 +0200
--- /dev/null
+report-with: libreoffice-core
+package-status: unixodbc libmyodbc odbc-postgresql libsqliteodbc tdsodbc mdbtools libmariadb-java libmysql-java libpg-java libsapdbc-java
--- /dev/null
+libreoffice-base: desktop-command-not-in-package libreoffice [usr/share/applications/libreoffice-base.desktop]
+# "aged out" due to debhelpers changelog trimming (see #1021502)
+libreoffice-base: debian-news-entry-has-unknown-version 1:4.2.1-1 [usr/share/doc/libreoffice-base/NEWS.Debian.gz:1]
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-base /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+debian/tmp/usr/share/man/man1/lobase.1.gz
--- /dev/null
+###
+# shared-mime-info
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.database; soffice --nologo --base %s; edit=soffice --nologo --base %s; print=soffice --nologo --base -p %s; test=test -n "$DISPLAY"; description="OpenDocument Database"; nametemplate=%s.odb; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.base; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; description="OpenOffice.org Database"; nametemplate=%s.sdb; priority=8
+
+#
+###
--- /dev/null
+#!/bin/sh
+
+set -e
+
+#INCLUDE_SHELL_LIB#
+
+if [ upgrade = "$1" ] || dpkg --compare-versions "$2" lt 1:6.4.0~beta1-2; then
+ dpkg-divert --remove --no-rename \
+ --divert /usr/lib/libreoffice/share/basic/dialog.xlc.noaccess \
+ /usr/lib/libreoffice/share/basic/dialog.xlc
+ dpkg-divert --remove --no-rename \
+ --divert /usr/lib/libreoffice/share/basic/script.xlc.noaccess \
+ /usr/lib/libreoffice/share/basic/script.xlc
+ # cleanup
+ rm -f /usr/lib/libreoffice/share/basic/script.xlc.noaccess
+ rm -f /usr/lib/libreoffice/share/basic/dialog.xlc.noaccess
+fi
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+/usr/lib/libreoffice/share/.registry/base.xcd /etc/libreoffice/registry/base.xcd
--- /dev/null
+libreoffice-calc-nogui: binary-or-shlib-defines-rpath
--- /dev/null
+###
+# shared-mime-info
+
+# Generic
+text/csv; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="CSV Document"; nametemplate=%s.csv; priority=3
+text/spreadsheet; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Spreadsheet Interchange Document"; nametemplate=%s.slk; priority=3
+
+# Corel Quattro Pro
+application/x-quattropro; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Quattro Pro 6 for Windows Spreadsheet"; nametemplate=%s.wb2; priority=3
+
+# dBase dBASE
+application/x-dbf; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="xBase Document"; nametemplate=%s.dbf; priority=3
+
+# ECMA Office Open XML (Microsoft Office 2007)
+application/vnd.ms-excel.sheet.macroEnabled.12; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Office Open XML Spreadsheet with Macros Enabled"; nametemplate=%s.xlsm; priority=3
+application/vnd.ms-excel.template.macroEnabled.12; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Office Open XML Spreadsheet Template with Macros Enabled"; nametemplate=%s.xltm; priority=3
+application/vnd.openxmlformats-officedocument.spreadsheetml.sheet; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Office Open XML Spreadsheet"; nametemplate=%s.xlsx; priority=3
+application/vnd.openxmlformats-officedocument.spreadsheetml.template; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Office Open XML Spreadsheet Template"; nametemplate=%s.xltx; priority=3
+
+# IBM Lotus 1-2-3
+application/vnd.lotus-1-2-3; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Lotus 1-2-3 spreadsheet"; nametemplate=%s.123; priority=3
+
+# Microsoft Excel
+application/vnd.ms-excel; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Microsoft Excel Document"; nametemplate=%s.xls; priority=3
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.chart; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; print=soffice --nologo --calc -p %s; test=test -n "$DISPLAY"; description="OpenDocument Chart"; nametemplate=%s.odc; priority=9
+application/vnd.oasis.opendocument.spreadsheet; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; print=soffice --nologo --calc -p %s; test=test -n "$DISPLAY"; description="OpenDocument Spreadsheet"; nametemplate=%s.ods; priority=9
+application/vnd.oasis.opendocument.spreadsheet-template; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; print=soffice --nologo --calc -p %s; test=test -n "$DISPLAY"; description="OpenDocument Spreadsheet Template"; nametemplate=%s.ots; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.calc; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="OpenOffice.org Spreadsheet"; nametemplate=%s.sxc; priority=8
+application/vnd.sun.xml.calc.template; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="OpenOffice.org Spreadsheet Template"; nametemplate=%s.stc; priority=8
+
+#
+###
+
--- /dev/null
+/usr/lib/libreoffice/share/.registry/calc.xcd /etc/libreoffice/registry/calc.xcd
--- /dev/null
+report-with: libreoffice-core
--- /dev/null
+libreoffice-calc: binary-or-shlib-defines-rpath
+libreoffice-calc: desktop-command-not-in-package libreoffice [usr/share/applications/libreoffice-calc.desktop]
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-calc /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+debian/tmp/usr/share/man/man1/localc.1.gz
+
--- /dev/null
+###
+# shared-mime-info
+
+# Generic
+text/csv; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="CSV Document"; nametemplate=%s.csv; priority=3
+text/spreadsheet; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Spreadsheet Interchange Document"; nametemplate=%s.slk; priority=3
+
+# Corel Quattro Pro
+application/x-quattropro; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Quattro Pro 6 for Windows Spreadsheet"; nametemplate=%s.wb2; priority=3
+
+# dBase dBASE
+application/x-dbf; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="xBase Document"; nametemplate=%s.dbf; priority=3
+
+# ECMA Office Open XML (Microsoft Office 2007)
+application/vnd.ms-excel.sheet.macroEnabled.12; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Office Open XML Spreadsheet with Macros Enabled"; nametemplate=%s.xlsm; priority=3
+application/vnd.ms-excel.template.macroEnabled.12; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Office Open XML Spreadsheet Template with Macros Enabled"; nametemplate=%s.xltm; priority=3
+application/vnd.openxmlformats-officedocument.spreadsheetml.sheet; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Office Open XML Spreadsheet"; nametemplate=%s.xlsx; priority=3
+application/vnd.openxmlformats-officedocument.spreadsheetml.template; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Office Open XML Spreadsheet Template"; nametemplate=%s.xltx; priority=3
+
+# IBM Lotus 1-2-3
+application/vnd.lotus-1-2-3; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Lotus 1-2-3 spreadsheet"; nametemplate=%s.123; priority=3
+
+# Microsoft Excel
+application/vnd.ms-excel; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="Microsoft Excel Document"; nametemplate=%s.xls; priority=3
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.chart; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; print=soffice --nologo --calc -p %s; test=test -n "$DISPLAY"; description="OpenDocument Chart"; nametemplate=%s.odc; priority=9
+application/vnd.oasis.opendocument.spreadsheet; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; print=soffice --nologo --calc -p %s; test=test -n "$DISPLAY"; description="OpenDocument Spreadsheet"; nametemplate=%s.ods; priority=9
+application/vnd.oasis.opendocument.spreadsheet-template; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; print=soffice --nologo --calc -p %s; test=test -n "$DISPLAY"; description="OpenDocument Spreadsheet Template"; nametemplate=%s.ots; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.calc; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="OpenOffice.org Spreadsheet"; nametemplate=%s.sxc; priority=8
+application/vnd.sun.xml.calc.template; soffice --nologo --calc %s; edit=soffice --nologo --calc %s; test=test -n "$DISPLAY"; description="OpenOffice.org Spreadsheet Template"; nametemplate=%s.stc; priority=8
+
+#
+###
+
--- /dev/null
+/usr/lib/libreoffice/share/.registry/calc.xcd /etc/libreoffice/registry/calc.xcd
--- /dev/null
+wizards/source/access2base/access2base.html
--- /dev/null
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-database.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.database.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-drawing.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.drawing.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-drawing-template.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.drawing-template.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-formula.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.formula.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-master-document.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.master-document.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-presentation.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.presentation.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-presentation-template.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.presentation-template.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-spreadsheet.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.spreadsheet.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-spreadsheet-template.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.spreadsheet-template.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-text.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.text.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-text-template.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.text-template.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-web-template.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.web-template.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-database.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.database.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-drawing.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.drawing.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-drawing-template.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.drawing-template.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-formula.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.formula.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-master-document.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.master-document.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-presentation.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.presentation.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-presentation-template.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.presentation-template.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-spreadsheet.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.spreadsheet.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-spreadsheet-template.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.spreadsheet-template.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-text.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.text.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-text-template.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.text-template.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-web-template.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.web-template.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-database.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.database.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-drawing.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.drawing.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-drawing-template.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.drawing-template.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-formula.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.formula.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-master-document.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.master-document.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-presentation.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.presentation.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-presentation-template.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.presentation-template.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-spreadsheet.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.spreadsheet.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-spreadsheet-template.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.spreadsheet-template.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-text.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.text.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-text-template.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.text-template.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-web-template.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.web-template.png
+etc/libreoffice/registry usr/lib/libreoffice/share/registry
--- /dev/null
+# this is essentially a breaks with version
+libreoffice-common: breaks-without-version libreoffice-help-5.2
--- /dev/null
+mv_conffile /etc/apparmor.d/usr.lib.libreofficeprogram.oosplash /etc/apparmor.d/usr.lib.libreoffice.program.oosplash 1:5.4.3-1
+mv_conffile /etc/apparmor.d/usr.lib.libreofficeprogram.senddoc /etc/apparmor.d/usr.lib.libreoffice.program.senddoc 1:5.4.3-1
+mv_conffile /etc/apparmor.d/usr.lib.libreofficeprogram.soffice.bin /etc/apparmor.d/usr.lib.libreoffice.program.soffice.bin 1:5.4.3-1
+mv_conffile /etc/apparmor.d/usr.lib.libreofficeprogram.xpdfimport /etc/apparmor.d/usr.lib.libreoffice.program.xpdfimport 1:5.4.3-1
+
+# do this manually since dpkg-maintscript-helper dir_to_symlink
+# does not work reliably in this case because we cannot ensure that all
+# conflicting packages previously shipping files in
+# /usr/lib/libreoffice/share/registry are either upgraded or removed
+# but not just deconfigured, see #985297
+#dir_to_symlink /usr/lib/libreoffice/share/registry /etc/libreoffice/registry 1:7.0.2~rc1-1
--- /dev/null
+debian/tmp/usr/share/man/man1/libreoffice.1.gz
+debian/tmp/usr/share/man/man1/loffice.1.gz
+debian/tmp/usr/share/man/man1/unopkg.1.gz
+debian/tmp/usr/share/man/man1/lofromtemplate.1.gz
--- /dev/null
+#!/bin/sh
+
+set -e
+
+#INCLUDE_SHELL_LIB#
+
+if [ "$1" = "triggered" ]; then
+ for triggername in $2; do
+ case "$triggername" in
+ # new "bundled" extensions (since 3.3)
+ "/@OODIR@/share/extensions")
+ make_lo_sync_extensions
+ ;;
+ "/@OODIR@")
+ # check also whether /usr/bin/loolwsd-systemplate-setup
+ # is +x do to not fail when it's gone but
+ # /var/lib/lool/systemplate is still there (loolwsd
+ # removed but not purged)
+ if [ -x /usr/bin/loolwsd-systemplate-setup -a \
+ -d /var/lib/lool/systemplate ]; then
+ update_lool_systemplate
+ fi
+ ;;
+ esac
+ done
+fi
+
+#DEBHELPER#
+
+# do this manually since dpkg-maintscript-helper dir_to_symlink
+# does not work reliably in this case because we cannot ensure that all
+# conflicting packages previously shipping files in
+# /usr/lib/libreoffice/share/registry are either upgraded or removed
+# but not just deconfigured, see #985297
+if [ "$1" = "configure" ] && dpkg --compare-versions "$2" lt-nl "1:7.0.4-4~" ; then
+ if [ ! -L /usr/lib/libreoffice/share/registry ]; then
+ if [ -d /usr/lib/libreoffice/share/registry ]; then
+ # this will fail if the directory is not yet empty
+ rmdir -v /usr/lib/libreoffice/share/registry
+ fi
+ ln -sfvT /etc/libreoffice/registry /usr/lib/libreoffice/share/registry
+ fi
+fi
--- /dev/null
+#!/bin/sh
+
+set -e
+
+#INCLUDE_SHELL_LIB#
+
+case "$1" in
+ remove|abort-install|abort-upgrade)
+ rm -rf /`echo @OODIR@ | sed -e s,usr/,var/,g`/share/prereg/bundled
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g`/share/prereg/ || true
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g`/share/ || true
+ # this belongs to -core, but won't work until we have -common stuff removed, too, so try here again
+ # in adduition to -core
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g`/program/ || true
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g` || true
+ # and try to remove /@OOBRANDDIR@ itself
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g` || true
+ ;;
+ purge)
+ rm -f /`echo @OODIR@ | sed -e s,usr/,var/,g`/share/config/javasettingsunopkginstall.xml
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g`/share/config || true
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g`/share || true
+ ;;
+esac
+
+#DEBHELPER#
--- /dev/null
+#!/bin/sh
+
+set -e
+
+# fix up broken 0 byte file, should be a dir
+if [ "$1" = "upgrade" ] && dpkg --compare-versions "$2" lt-nl "1:7.4.1~rc1-3"; then
+ if [ -f /@OODIR@/share/extensions -a ! -s /@OODIR@/share/extensions ]; then
+ rm /@OODIR@/share/extensions
+ fi
+fi
+
+#DEBHELPER#
--- /dev/null
+interest-noawait /@OODIR@/share/extensions
+interest-noawait /@OODIR@
--- /dev/null
+/usr/lib/libreoffice/share/.registry/main.xcd /etc/libreoffice/registry/main.xcd
+/usr/lib/libreoffice/share/.registry/pdfimport.xcd /etc/libreoffice/registry/pdfimport.xcd
+/usr/lib/libreoffice/share/.registry/xsltfilter.xcd /etc/libreoffice/registry/xsltfilter.xcd
+/usr/lib/libreoffice/share/.registry/lingucomponent.xcd /etc/libreoffice/registry/lingucomponent.xcd
+/usr/lib/libreoffice/share/.registry/Langpack-en-US.xcd /etc/libreoffice/registry/Langpack-en-US.xcd
+/usr/lib/libreoffice/share/.registry/res/fcfg_langpack_en-US.xcd /etc/libreoffice/registry/res/fcfg_langpack_en-US.xcd
--- /dev/null
+report-with: libreoffice-common libreoffice-java-common fonts-opensymbol ure-java
--- /dev/null
+#!/bin/sh
+
+# list all installed extensions. --bundled, --shared and non-shared
+/usr/lib/libreoffice/program/unopkg list --bundled >&3
+/usr/lib/libreoffice/program/unopkg list --shared >&3
+/usr/lib/libreoffice/program/unopkg list >&3
+
+# experimental stuff enabled?
+echo "" >&3
+echo "Experimental features enabled:" >&3
+#_lo_profile_ver=`echo @OOVER@ | cut -d. -f1`
+_lo_profile_ver=4
+if [ -d "$HOME/.config/libreoffice/$_lo_profile_ver" ]; then
+ grep ExperimentalMode $HOME/.config/libreoffice/$_lo_profile_ver/user/registrymodifications.xcu >&3
+fi
+
--- /dev/null
+libreoffice (1:7.4.2~rc1-1) unstable; urgency=low
+
+ * LibreOffice 7.4.0/7.4.1 contained a bug about wrongly remembering the
+ size of the LibreOffice windows. (Most prominently showing inside KDE).
+ .
+ This has been fixed in 7.4.2 but you experience this problem even after
+ a second start of the new LibreOffice you might either need to reset your
+ user profile or remove the affecting keys from it manuallly
+ (ooSetupFactoryWindowAttributes in
+ ~/.config/libreofficei/4/user/registrymodifications.xcu)
+
+ -- Rene Engelhard <rene@debian.org> Wed, 09 Nov 2022 07:31:23 +0200
+
--- /dev/null
+report-with: ure-java libreoffice-common libreoffice-java-common fonts-opensymbol
+package-status: libxrender1 libxinerama1 libsane iceweasel firefox icedove iceape-browser pstoedit imagemagick fglrx-driver nvidia-glx nvidia-glx-legacy
--- /dev/null
+#!/bin/sh
+
+# list all installed extensions. --bundled, --shared and non-shared
+/usr/lib/libreoffice/program/unopkg list --bundled >&3
+/usr/lib/libreoffice/program/unopkg list --shared >&3
+/usr/lib/libreoffice/program/unopkg list >&3
+
+# experimental stuff enabled?
+echo "" >&3
+echo "Experimental features enabled:" >&3
+#_lo_profile_ver=`echo @OOVER@ | cut -d. -f1`
+_lo_profile_ver=4
+if [ -d "$HOME/.config/libreoffice/$_lo_profile_ver" ]; then
+ grep ExperimentalMode $HOME/.config/libreoffice/$_lo_profile_ver/user/registrymodifications.xcu >&3
+fi
+
+# installed VCLplugs
+echo "" >&3
+echo "Installed VCLplugs:" >&3
+dpkg -l libreoffice-gtk3 libreoffice-qt5 libreoffice-kf5 >&3
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-core /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+#!/bin/sh
+
+set -e
+
+#INCLUDE_SHELL_LIB#
+
+if [ "$1" = "remove" ]; then
+ rm -rf /var/spool/libreoffice
+fi
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-dev-common /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+usr/share/doc/libreoffice/sdk/docs usr/share/doc/libreoffice-dev-doc/api
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-dev /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+report-with: libreoffice-core libreoffice-core-nogui
--- /dev/null
+###
+# shared-mime-info
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.graphics; soffice --nologo --draw %s; edit=soffice --nologo --draw %s; print=soffice --nologo --draw -p %s; test=test -n "$DISPLAY"; description="OpenDocument Drawing"; nametemplate=%s.odg; priority=9
+application/vnd.oasis.opendocument.graphics-template; soffice --nologo --draw %s; edit=soffice --nologo --draw %s; print=soffice --nologo --draw -p %s; test=test -n "$DISPLAY"; description="OpenDocument Drawing Template"; nametemplate=%s.otg; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.draw; soffice --nologo --draw %s; edit=soffice --nologo --draw %s; test=test -n "$DISPLAY"; description="OpenOffice.org Drawing"; nametemplate=%s.sxd; priority=8
+application/vnd.sun.xml.draw.template; soffice --nologo --draw %s; edit=soffice --nologo --draw %s; test=test -n "$DISPLAY"; description="OpenOffice.org Drawing Template"; nametemplate=%s.std; priority=8
+
+#
+###
--- /dev/null
+/usr/lib/libreoffice/share/.registry/draw.xcd /etc/libreoffice/registry/draw.xcd
+/usr/lib/libreoffice/share/.registry/graphicfilter.xcd /etc/libreoffice/registry/graphicfilter.xcd
--- /dev/null
+report-with: libreoffice-core
--- /dev/null
+libreoffice-draw: desktop-command-not-in-package libreoffice [usr/share/applications/libreoffice-draw.desktop]
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-draw /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+debian/tmp/usr/share/man/man1/lodraw.1.gz
--- /dev/null
+###
+# shared-mime-info
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.graphics; soffice --nologo --draw %s; edit=soffice --nologo --draw %s; print=soffice --nologo --draw -p %s; test=test -n "$DISPLAY"; description="OpenDocument Drawing"; nametemplate=%s.odg; priority=9
+application/vnd.oasis.opendocument.graphics-template; soffice --nologo --draw %s; edit=soffice --nologo --draw %s; print=soffice --nologo --draw -p %s; test=test -n "$DISPLAY"; description="OpenDocument Drawing Template"; nametemplate=%s.otg; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.draw; soffice --nologo --draw %s; edit=soffice --nologo --draw %s; test=test -n "$DISPLAY"; description="OpenOffice.org Drawing"; nametemplate=%s.sxd; priority=8
+application/vnd.sun.xml.draw.template; soffice --nologo --draw %s; edit=soffice --nologo --draw %s; test=test -n "$DISPLAY"; description="OpenOffice.org Drawing Template"; nametemplate=%s.std; priority=8
+
+#
+###
--- /dev/null
+/usr/lib/libreoffice/share/.registry/draw.xcd /etc/libreoffice/registry/draw.xcd
+/usr/lib/libreoffice/share/.registry/graphicfilter.xcd /etc/libreoffice/registry/graphicfilter.xcd
--- /dev/null
+report-with: libreoffice-core evolution libreoffice-base
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-evolution /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+/usr/lib/libreoffice/share/.registry/evoab.xcd /etc/libreoffice/registry/evoab.xcd
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-gnome /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+/usr/lib/libreoffice/share/.registry/gnome.xcd /etc/libreoffice/registry/gnome.xcd
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-gtk3 /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-ca-valencia /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-ca /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+/usr/share/javascript/normalize.css/normalize.css usr/share/libreoffice/help/normalize.css
+/usr/share/nodejs/prismjs/prism.js usr/share/libreoffice/help/prism.js
+/usr/share/nodejs/prismjs/themes/prism-coy.css usr/share/libreoffice/help/prism.css
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-common /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-cs /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-da /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-de /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-dz /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-el /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-en-gb /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-en-us /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-es /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-et /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-eu /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-fi /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-fr /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-gl /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-hi /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-hu /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-id /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-it /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-ja /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-km /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-ko /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-nl /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-om /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-pl /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-pt-br /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-pt /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-ru /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-sk /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-sl /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-sv /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-tr /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-vi /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-zh-cn /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-help-zh-tw /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+# these are in -help-common. See lintian bug http://bugs.debian.org/897244
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/media/*
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/help.html
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/idxcaption.xsl
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/fuse.js
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/help.js
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/hid2file.js
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/paginathing.js
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/idxcontent.xsl
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/index.html
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/normalize.css
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/main_transform.xsl
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/help2.js
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/default.css
+
--- /dev/null
+report-with: libreoffice-core libreoffice-core-nogui libreoffice-draw libreoffice-draw-nogui
--- /dev/null
+###
+# shared-mime-info
+
+# ECMA Office Open XML (Microsoft Office 2007)
+application/vnd.ms-powerpoint.presentation.macroEnabled.12; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Office Open XML Presentation with Macros Enabled"; nametemplate=%s.pptm; priority=3
+application/vnd.ms-powerpoint.slideshow.macroEnabled.12; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Office Open XML Presentation Slide Show with Macros Enabled"; nametemplate=%s.ppsm; priority=3
+application/vnd.ms-powerpoint.template.macroEnabled.12; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Office Open XML Presentation Template with Macros Enabled"; nametemplate=%s.potm; priority=3
+application/vnd.openxmlformats-officedocument.presentationml.presentation; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Office Open XML Presentation"; nametemplate=%s.pptx; priority=3
+application/vnd.openxmlformats-officedocument.presentationml.slideshow; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Office Open XML Presentation Slide Show"; nametemplate=%s.ppsx; priority=3
+application/vnd.openxmlformats-officedocument.presentationml.template; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Office Open XML Presentation Template"; nametemplate=%s.potx; priority=3
+
+# Microsoft PowerPoint
+application/vnd.ms-powerpoint; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Microsoft PowerPoint Document"; nametemplate=%s.ppt; priority=3
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.presentation; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; print=soffice --nologo --impress -p %s; test=test -n "$DISPLAY"; description="OpenDocument Presentation"; nametemplate=%s.odp; priority=9
+application/vnd.oasis.opendocument.presentation-template; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; print=soffice --nologo --impress -p %s; test=test -n "$DISPLAY"; description="OpenDocument Presentation Template"; nametemplate=%s.otp; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.impress; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="OpenOffice.org Presentation"; nametemplate=%s.sxi; priority=8
+application/vnd.sun.xml.impress.template; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="OpenOffice.org Presentation Template"; nametemplate=%s.sti; priority=8
+
+#
+###
+
--- /dev/null
+/usr/lib/libreoffice/share/.registry/impress.xcd /etc/libreoffice/registry/impress.xcd
--- /dev/null
+report-with: libreoffice-core libreoffice-draw glx-alternative-nvidia
--- /dev/null
+#!/bin/sh
+
+dpkg -l | grep nvidia >&3
--- /dev/null
+libreoffice-impress: desktop-command-not-in-package libreoffice [usr/share/applications/libreoffice-impress.desktop]
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-impress /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+debian/tmp/usr/share/man/man1/loimpress.1.gz
--- /dev/null
+###
+# shared-mime-info
+
+# ECMA Office Open XML (Microsoft Office 2007)
+application/vnd.ms-powerpoint.presentation.macroEnabled.12; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Office Open XML Presentation with Macros Enabled"; nametemplate=%s.pptm; priority=3
+application/vnd.ms-powerpoint.slideshow.macroEnabled.12; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Office Open XML Presentation Slide Show with Macros Enabled"; nametemplate=%s.ppsm; priority=3
+application/vnd.ms-powerpoint.template.macroEnabled.12; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Office Open XML Presentation Template with Macros Enabled"; nametemplate=%s.potm; priority=3
+application/vnd.openxmlformats-officedocument.presentationml.presentation; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Office Open XML Presentation"; nametemplate=%s.pptx; priority=3
+application/vnd.openxmlformats-officedocument.presentationml.slideshow; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Office Open XML Presentation Slide Show"; nametemplate=%s.ppsx; priority=3
+application/vnd.openxmlformats-officedocument.presentationml.template; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Office Open XML Presentation Template"; nametemplate=%s.potx; priority=3
+
+# Microsoft PowerPoint
+application/vnd.ms-powerpoint; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="Microsoft PowerPoint Document"; nametemplate=%s.ppt; priority=3
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.presentation; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; print=soffice --nologo --impress -p %s; test=test -n "$DISPLAY"; description="OpenDocument Presentation"; nametemplate=%s.odp; priority=9
+application/vnd.oasis.opendocument.presentation-template; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; print=soffice --nologo --impress -p %s; test=test -n "$DISPLAY"; description="OpenDocument Presentation Template"; nametemplate=%s.otp; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.impress; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="OpenOffice.org Presentation"; nametemplate=%s.sxi; priority=8
+application/vnd.sun.xml.impress.template; soffice --nologo --impress %s; edit=soffice --nologo --impress %s; test=test -n "$DISPLAY"; description="OpenOffice.org Presentation Template"; nametemplate=%s.sti; priority=8
+
+#
+###
+
--- /dev/null
+/usr/lib/libreoffice/share/.registry/impress.xcd /etc/libreoffice/registry/impress.xcd
+/usr/lib/libreoffice/share/.registry/ogltrans.xcd /etc/libreoffice/registry/ogltrans.xcd
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-java-common /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-kde5 /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-kf5 /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-af /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-am /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ar /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-as /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ast /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-be /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-bg /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-bn /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-br /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-bs /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ca /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-cs /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-cy /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-da /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-de /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-dz /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-el /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-en-gb /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-en-us /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-en-za /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-eo /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-es /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-et /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-eu /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-fa /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-fi /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-fr /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ga /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-gd /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-gl /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-gu /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-gug /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-he /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-hi /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-hr /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-hu /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-id /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-in /usr/share/doc/libreoffice-common 1:6.4.0-1
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-is /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-it /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ja /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ka /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-kk /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-km /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-kmr /usr/share/doc/libreoffice-common 1:6.4.0-1
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-kn /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ko /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-lt /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-lv /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-mk /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ml /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-mn /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-mr /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-nb /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ne /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-nl /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-nn /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-nr /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-nso /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-oc /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-om /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-or /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-pa-in /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-pl /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-pt-br /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-pt /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ro /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ru /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-rw /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-si /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-sk /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-sl /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-sr /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ss /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-st /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-sv /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ta /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-te /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-tg /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-th /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-tn /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-tr /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ts /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ug /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-uk /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-uz /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-ve /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-vi /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-xh /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-za /usr/share/doc/libreoffice-common 1:6.4.0-1
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-zh-cn /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-zh-tw /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-l10n-zu /usr/share/doc/libreoffice-common 1:6.4.0~rc1~git20191209
--- /dev/null
+/usr/lib/libreoffice/share/.registry/Langpack-@ISO@.xcd /etc/libreoffice/registry/Langpack-@ISO@.xcd
+/usr/lib/libreoffice/share/.registry/res/fcfg_langpack_@ISO@.xcd /etc/libreoffice/registry/res/fcfg_langpack_@ISO@.xcd
+/usr/lib/libreoffice/share/.registry/res/registry_@ISO@.xcd /etc/libreoffice/registry/res/registry_@ISO@.xcd
--- /dev/null
+/usr/lib/libreoffice/share/.registry/librelogo.xcd /etc/libreoffice/registry/librelogo.xcd
--- /dev/null
+report-with: libreoffice-core libreoffice-core-nogui
--- /dev/null
+###
+# shared-mime-info
+
+# Generic
+text/mathml; soffice --nologo --math %s; edit=soffice --nologo --math %s; test=test -n "$DISPLAY"; description="MathML Formula"; nametemplate=%s.mml; priority=3
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.formula; soffice --nologo --math %s; edit=soffice --nologo --math %s; print=soffice --nologo --math -p %s; test=test -n "$DISPLAY"; description="OpenDocument Formula"; nametemplate=%s.odf; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.math; soffice --nologo --math %s; edit=soffice --nologo --math %s; test=test -n "$DISPLAY"; description="OpenOffice.org Formula"; nametemplate=%s.sxm; priority=8
+
+#
+###
--- /dev/null
+/usr/lib/libreoffice/share/.registry/math.xcd /etc/libreoffice/registry/math.xcd
--- /dev/null
+report-with: libreoffice-core
--- /dev/null
+libreoffice-math: desktop-command-not-in-package libreoffice [usr/share/applications/libreoffice-math.desktop]
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-math /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+debian/tmp/usr/share/man/man1/lomath.1.gz
--- /dev/null
+###
+# shared-mime-info
+
+# Generic
+text/mathml; soffice --nologo --math %s; edit=soffice --nologo --math %s; test=test -n "$DISPLAY"; description="MathML Formula"; nametemplate=%s.mml; priority=3
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.formula; soffice --nologo --math %s; edit=soffice --nologo --math %s; print=soffice --nologo --math -p %s; test=test -n "$DISPLAY"; description="OpenDocument Formula"; nametemplate=%s.odf; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.math; soffice --nologo --math %s; edit=soffice --nologo --math %s; test=test -n "$DISPLAY"; description="OpenOffice.org Formula"; nametemplate=%s.sxm; priority=8
+
+#
+###
--- /dev/null
+/usr/lib/libreoffice/share/.registry/math.xcd /etc/libreoffice/registry/math.xcd
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-mysql-connector /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+report-with: ure-java
--- /dev/null
+#!/bin/sh
+/usr/lib/libreoffice/program/unopkg list --bundled com.sun.star.comp.Calc.NLPSolver >&3
--- /dev/null
+libreoffice-nlpsolver: jar-not-in-usr-share [usr/lib/libreoffice/share/extensions/nlpsolver/EvolutionarySolver.jar]
+libreoffice-nlpsolver: jar-not-in-usr-share [usr/lib/libreoffice/share/extensions/nlpsolver/help/*/help.jar]
+libreoffice-nlpsolver: jar-not-in-usr-share [usr/lib/libreoffice/share/extensions/nlpsolver/nlpsolver.jar]
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-officebean /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-plasma /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-qt5 /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-report-builder-bin /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+report-with: libreoffice-base libreoffice-java-common ure-java
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-report-builder /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+/usr/lib/libreoffice/share/.registry/reportbuilder.xcd /etc/libreoffice/registry/reportbuilder.xcd
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-script-provider-bsh /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-script-provider-js /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+report-with: python-uno python3-uno
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-script-provider-python /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+libreoffice (1:5.3.0~alpha1-1) experimental; urgency=low
+
+ * LibreOffice switched from Firebird 2.5 to Firebird 3. Unfortunately
+ the format used by the Firebird 2.5 code (fdb - the native on-disk format)
+ is NOT compatible with the "new" one (the archive format). LibreOffice 5.3
+ can NOT read older .odbs having .fdb embedded.
+
+ Some future firebird version might have a way to convert itself/make LO
+ able to convert but until then you need to convert manually as follows:
+
+ You need the gbak tool from firebird2.5:
+ https://packages.debian.org/search?searchon=contents&keywords=gbak&mode=exactfilename&suite=oldstable&arch=any
+
+ Then execute:
+ unzip -d oldFirebird.odb temp;
+ gbak -b temp/database/firebird.fdb temp/database/firebird.fbk;
+ rm temp/database/firebird.fdb
+ zip -FSr oldFirebird.odb temp;
+ rm -r temp;
+
+ -- Rene Engelhard <rene@debian.org> Mon, 28 Nov 2016 10:27:15 +0200
--- /dev/null
+# "aged out" due to debhelpers changelog trimming (see #1021502)
+libreoffice-sdbc-firebird: debian-news-entry-has-unknown-version 1:5.3.0~alpha1-1 [usr/share/doc/libreoffice-sdbc-firebird/NEWS.Debian.gz:1]
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-sdbc-firebird /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-sdbc-hsqldb /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-sdbc-mysql /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-sdbc-postgresql /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
+rm_conffile /etc/libreoffice/postgresql-sdbc.ini 1:6.4.0~alpha1~git20191027
--- /dev/null
+/usr/lib/libreoffice/share/.registry/postgresql.xcd /etc/libreoffice/registry/postgresql.xcd
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-style-breeze /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-style-colibre /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-style-elementary /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-style-karasa-jaga /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-style-sifr /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-style-tango /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-subsequentcheckbase /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+report-with: ure-java
--- /dev/null
+#!/bin/sh
+/usr/lib/libreoffice/program/unopkg list --bundled com.sun.wiki-publisher >&3
--- /dev/null
+libreoffice-wiki-publisher: jar-not-in-usr-share [usr/lib/libreoffice/share/extensions/wiki-publisher/help/*/help.jar]
+libreoffice-wiki-publisher: jar-not-in-usr-share [usr/lib/libreoffice/share/extensions/wiki-publisher/mediawiki.jar]
--- /dev/null
+report-with: libreoffice-core libreoffice-core-nogui
--- /dev/null
+###
+# shared-mime-info
+
+# Generic
+application/rtf; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Rich Text Format"; nametemplate=%s.rtf; priority=3
+application/x-extension-txt; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Plain Text Document"; nametemplate=%s.txt; priority=3
+application/x-t602; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="T602 Document"; nametemplate=%s.602; priority=3
+
+# Corel WordPerfect
+application/vnd.wordperfect; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="WordPerfect Document"; nametemplate=%s.wp; priority=3
+
+# ECMA Office Open XML (Microsoft Office 2007)
+application/vnd.ms-word.document.macroEnabled.12; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Office Open XML Document with Macros Enabled"; nametemplate=%s.docm; priority=3
+application/vnd.ms-word.template.macroEnabled.12; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Office Open XML Document Template with Macros Enabled"; nametemplate=%s.dotm; priority=3
+application/vnd.openxmlformats-officedocument.wordprocessingml.document; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Office Open XML Document"; nametemplate=%s.docx; priority=3
+application/vnd.openxmlformats-officedocument.wordprocessingml.template; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Office Open XML Document Template"; nametemplate=%s.dotx; priority=3
+
+# Microsoft Word
+application/msword; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Microsoft Word Document"; nametemplate=%s.doc; priority=3
+
+# Microsoft Works
+application/vnd.ms-works; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Microsoft Works Document"; nametemplate=%s.wps; priority=3
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.text; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; print=soffice --nologo --writer -p %s; test=test -n "$DISPLAY"; description="OpenDocument Text Document"; nametemplate=%s.odt; priority=9
+application/vnd.oasis.opendocument.text-master; soffice --nologo --global %s; edit=soffice --nologo --writer %s; print=soffice --nologo --writer -p %s; test=test -n "$DISPLAY"; description="OpenDocument Master Document"; nametemplate=%s.odm; priority=9
+application/vnd.oasis.opendocument.text-template; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; print=soffice --nologo --writer -p %s; test=test -n "$DISPLAY"; description="OpenDocument Text Document Template"; nametemplate=%s.ott; priority=9
+application/vnd.oasis.opendocument.text-web; soffice --nologo --web %s; edit=soffice --nologo --web %s; print=soffice --nologo --web -p %s; test=test -n "$DISPLAY"; description="OpenDocument HTML Document Template"; nametemplate=%s.oth; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.writer; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; description="OpenOffice.org Text Document"; nametemplate=%s.sxw; priority=8
+application/vnd.sun.xml.writer.global; soffice --nologo --global %s; edit=soffice --nologo --writer %s; description="OpenOffice.org Master Document"; nametemplate=%s.sxg; priority=8
+application/vnd.sun.xml.writer.template; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; description="OpenOffice.org Text Document Template"; nametemplate=%s.stw; priority=8
+
+#
+###
+
--- /dev/null
+/usr/lib/libreoffice/share/.registry/writer.xcd /etc/libreoffice/registry/writer.xcd
--- /dev/null
+report-with: libreoffice-core
--- /dev/null
+libreoffice-writer: desktop-command-not-in-package libreoffice [usr/share/applications/libreoffice-writer.desktop]
--- /dev/null
+symlink_to_dir /usr/share/doc/libreoffice-writer /usr/share/doc/libreoffice-core 1:6.4.0~alpha1~git20191013
--- /dev/null
+debian/tmp/usr/share/man/man1/loweb.1.gz
+debian/tmp/usr/share/man/man1/lowriter.1.gz
+
--- /dev/null
+###
+# shared-mime-info
+
+# Generic
+application/rtf; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Rich Text Format"; nametemplate=%s.rtf; priority=3
+application/x-extension-txt; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Plain Text Document"; nametemplate=%s.txt; priority=3
+application/x-t602; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="T602 Document"; nametemplate=%s.602; priority=3
+
+# Corel WordPerfect
+application/vnd.wordperfect; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="WordPerfect Document"; nametemplate=%s.wp; priority=3
+
+# ECMA Office Open XML (Microsoft Office 2007)
+application/vnd.ms-word.document.macroEnabled.12; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Office Open XML Document with Macros Enabled"; nametemplate=%s.docm; priority=3
+application/vnd.ms-word.template.macroEnabled.12; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Office Open XML Document Template with Macros Enabled"; nametemplate=%s.dotm; priority=3
+application/vnd.openxmlformats-officedocument.wordprocessingml.document; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Office Open XML Document"; nametemplate=%s.docx; priority=3
+application/vnd.openxmlformats-officedocument.wordprocessingml.template; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Office Open XML Document Template"; nametemplate=%s.dotx; priority=3
+
+# Microsoft Word
+application/msword; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Microsoft Word Document"; nametemplate=%s.doc; priority=3
+
+# Microsoft Works
+application/vnd.ms-works; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; test=test -n "$DISPLAY"; description="Microsoft Works Document"; nametemplate=%s.wps; priority=3
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.text; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; print=soffice --nologo --writer -p %s; test=test -n "$DISPLAY"; description="OpenDocument Text Document"; nametemplate=%s.odt; priority=9
+application/vnd.oasis.opendocument.text-master; soffice --nologo --global %s; edit=soffice --nologo --writer %s; print=soffice --nologo --writer -p %s; test=test -n "$DISPLAY"; description="OpenDocument Master Document"; nametemplate=%s.odm; priority=9
+application/vnd.oasis.opendocument.text-template; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; print=soffice --nologo --writer -p %s; test=test -n "$DISPLAY"; description="OpenDocument Text Document Template"; nametemplate=%s.ott; priority=9
+application/vnd.oasis.opendocument.text-web; soffice --nologo --web %s; edit=soffice --nologo --web %s; print=soffice --nologo --web -p %s; test=test -n "$DISPLAY"; description="OpenDocument HTML Document Template"; nametemplate=%s.oth; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.writer; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; description="OpenOffice.org Text Document"; nametemplate=%s.sxw; priority=8
+application/vnd.sun.xml.writer.global; soffice --nologo --global %s; edit=soffice --nologo --writer %s; description="OpenOffice.org Master Document"; nametemplate=%s.sxg; priority=8
+application/vnd.sun.xml.writer.template; soffice --nologo --writer %s; edit=soffice --nologo --writer %s; description="OpenOffice.org Text Document Template"; nametemplate=%s.stw; priority=8
+
+#
+###
+
--- /dev/null
+/usr/lib/libreoffice/share/.registry/writer.xcd /etc/libreoffice/registry/writer.xcd
--- /dev/null
+report-with: libreoffice-core libreoffice-writer libreoffice-calc libreoffice-base libreoffice-draw libreoffice-impress libreoffice-math
+
--- /dev/null
+symlink_to_dir /usr/share/doc/libreofficekit-data /usr/share/doc/libreoffice-common 1:6.4.0~alpha1~git20191013
--- /dev/null
+libreofficekit/README.md
--- /dev/null
+libuno-cppu3: symbols-declares-dependency-on-other-package libstdc++6 (>= 4.1.1) (libuno_cppu.so.3) [symbols]
--- /dev/null
+libuno_cppu.so.3 libuno-cppu3 #MINVER#
+| libuno-cppu3 #MINVER#, libstdc++6 (>= 4.1.1)
+ (symver)UDK_3_0_0 1.4.0
+ (symver)UDK_3.1 1.4.0
+ (symver)UDK_3.2 1.4.0
+ (symver)UDK_3.3 1.4.0
+ (symver)GLIBCXX_3.4 3.6 1
+ (symver)LIBO_UDK_4.4 4.4.0~alpha
+# add new stuff BELOW this line
+# and note that the stuff above HAS NO epoch but the
+# below HAS
--- /dev/null
+libuno-cppuhelpergcc3-3: symbols-declares-dependency-on-other-package uno-libs-private (libuno_cppuhelpergcc3.so.3) [symbols]
+libuno-cppuhelpergcc3-3: symbols-declares-dependency-on-other-package libstdc++6 (>= 4.1.1) (libuno_cppuhelpergcc3.so.3) [symbols]
--- /dev/null
+libuno_cppuhelpergcc3.so.3 libuno-cppuhelpergcc3-3 #MINVER#, uno-libs-private
+| libuno-cppuhelpergcc3-3 #MINVER#, uno-libs-private, libstdc++6 (>= 4.1.1)
+ (symver)UDK_3_0_0 1.4.0
+ (symver)UDK_3.1 1.4.0
+ (symver)UDK_3.2 1.4.0
+ (symver)UDK_3.3 1.4.0
+ (symver)UDK_3.4 1.4.0
+ (symver)UDK_3.5 1.4.0
+ (symver)UDK_3.6 1.7.0
+ (symver)UDK_3.7 3.4.0
+ (symver)UDK_3.8 3.5.0~beta
+ (symver)GLIBCXX_3.4 3.6 1
+ (symver)LIBO_UDK_3.9 4.0.0~alpha
+ (symver)LIBO_UDK_5.3 5.3.0~alpha
+# add new stuff BELOW this line
+# and note that the stuff above HAS NO epoch but the
+# below HAS
+ (symver)LIBO_UDK_7.4 1:7.4.0~alpha
--- /dev/null
+libuno-purpenvhelpergcc3-3: symbols-declares-dependency-on-other-package libstdc++6 (>= 4.1.1) (libuno_purpenvhelpergcc3.so.3) [symbols]
--- /dev/null
+libuno_purpenvhelpergcc3.so.3 libuno-purpenvhelpergcc3-3 #MINVER#
+| libuno-purpenvhelpergcc3-3 #MINVER#, libstdc++6 (>= 4.1.1)
+ (symver)UDK_3_0_0 1.4.0
+ (symver)GLIBCXX_3.4 3.6 1
+# add new stuff BELOW this line
+# and note that the stuff above HAS NO epoch but the
+# below HAS
--- /dev/null
+libuno-sal3: symbols-declares-dependency-on-other-package libstdc++6 (>= 4.1.1) (libuno_sal.so.3) [symbols]
--- /dev/null
+libuno_sal.so.3 libuno-sal3 #MINVER#
+| libuno-sal3 #MINVER#, libstdc++6 (>= 4.1.1)
+ (symver)UDK_3_0_0 1.4.0
+ (symver)UDK_3.1 1.4.0
+ (symver)UDK_3.2 1.4.0
+ (symver)UDK_3.3 1.4.0
+ (symver)UDK_3.4 1.4.0
+ (symver)UDK_3.5 1.4.0
+ (symver)UDK_3.6 1.4.0
+ (symver)UDK_3.7 1.4.0
+ (symver)UDK_3.8 1.4.0
+ (symver)UDK_3.9 1.5.0
+ (symver)UDK_3.10 1.6.0
+ UDK_3.11@UDK_3.11 1.7.0+LibO3.3.0~beta3
+ osl_clearEnvironment@UDK_3.11 1.7.0+LibO3.3.0~beta3
+ osl_setEnvironment@UDK_3.11 1.7.0+LibO3.3.0~beta3
+ (symver)UDK_3.11 1.8.0
+ (symver)PRIVATE_1.0 3.3.0~
+ (symver)PRIVATE_1.1 3.3.0~
+ (symver)LIBO_UDK_3.5 3.5.0~beta
+ (symver)PRIVATE_1.2 3.5.0~beta
+ (symver)PRIVATE_textenc.1 3.6.0~beta
+ (symver)GLIBCXX_3.4 3.6 1
+ (symver)LIBO_UDK_3.6 4.0.0~alpha
+ (symver)LIBO_UDK_4.0 4.0.0~beta
+ (symver)LIBO_UDK_4.1 4.1.0~alpha
+ (symver)LIBO_UDK_4.2 4.2.0~rc1
+ (symver)LIBO_UDK_4.3 4.3.0~alpha
+ (symver)LIBO_UDK_5.0 5.0.0~alpha
+ (symver)LIBO_UDK_5.1 5.1.0~alpha
+ (symver)LIBO_UDK_5.2 5.2.0~alpha
+ (symver)LIBO_UDK_5.3 5.3.0~alpha
+ (symver)LIBO_UDK_6.2 6.2.0~alpha
+ (symver)PRIVATE_1.3 5.4.0~alpha
+ (symver)PRIVATE_1.4 6.0.0~alpha
+ (symver)PRIVATE_1.5 6.1.0~alpha
+ (symver)PRIVATE_1.6 6.4.0~beta
+# add new stuff BELOW this line
+# and note that the stuff above HAS NO epoch but the
+# below HAS
+ (symver)PRIVATE_1.7 1:7.1.0~alpha1
+ (symver)PRIVATE_1.8 1:7.3.0~beta1
--- /dev/null
+libuno-salhelpergcc3-3: symbols-declares-dependency-on-other-package libstdc++6 (>= 4.1.1) (libuno_salhelpergcc3.so.3) [symbols]
--- /dev/null
+libuno_salhelpergcc3.so.3 libuno-salhelpergcc3-3 #MINVER#
+| libuno-salhelpergcc3-3 #MINVER#, libstdc++6 (>= 4.1.1)
+ (symver)UDK_3_0_0 1.4.0
+ (symver)UDK_3.1 1.4.0
+ (symver)LIBO_UDK_3.6 3.6.0~beta
+ (symver)GLIBCXX_3.4 3.6 1
+# add new stuff BELOW this line
+# and note that the stuff above HAS NO epoch but the
+# below HAS
--- /dev/null
+# List of POM files for the package
+# Format of this file is:
+# <path to pom file> [option]*
+# where option can be:
+# --ignore: ignore this POM and its artifact if any
+# --ignore-pom: don't install the POM. To use on POM files that are created
+# temporarily for certain artifacts such as Javadoc jars. [mh_install, mh_installpoms]
+# --no-parent: remove the <parent> tag from the POM
+# --package=<package>: an alternative package to use when installing this POM
+# and its artifact
+# --has-package-version: to indicate that the original version of the POM is the same as the upstream part
+# of the version for the package.
+# --keep-elements=<elem1,elem2>: a list of XML elements to keep in the POM
+# during a clean operation with mh_cleanpom or mh_installpom
+# --artifact=<path>: path to the build artifact associated with this POM,
+# it will be installed when using the command mh_install. [mh_install]
+# --java-lib: install the jar into /usr/share/java to comply with Debian
+# packaging guidelines
+# --usj-name=<name>: name to use when installing the library in /usr/share/java
+# --usj-version=<version>: version to use when installing the library in /usr/share/java
+# --no-usj-versionless: don't install the versionless link in /usr/share/java
+# --dest-jar=<path>: the destination for the real jar.
+# It will be installed with mh_install. [mh_install]
+# --classifier=<classifier>: Optional, the classifier for the jar. Empty by default.
+# --site-xml=<location>: Optional, the location for site.xml if it needs to be installed.
+# Empty by default. [mh_install]
+#
+debian/pom.unoloader.xml --no-parent --has-package-version
--- /dev/null
+From a06c0eabc164cd2233cad4e159cff005951a5d06 Mon Sep 17 00:00:00 2001
+From: "Brett T. Warden" <brett.t.warden@intel.com>
+Date: Fri, 2 Dec 2022 12:06:35 -0800
+Subject: [PATCH] Remove dependency on BitArray.h from zxing-1.2.0
+
+In zxing-1.4.0, numerous headers are no longer public. Rework the
+ConvertToSVGFormat method so it uses bitmatrix.get instead of
+bitmatrix.getRow, similar to the ToSVG method in zxing itself.
+
+See https://github.com/zxing-cpp/zxing-cpp/issues/361
+
+---
+ cui/source/dialogs/QrCodeGenDialog.cxx | 5 +----
+ 1 file changed, 1 insertion(+), 4 deletions(-)
+
+diff --git a/cui/source/dialogs/QrCodeGenDialog.cxx b/cui/source/dialogs/QrCodeGenDialog.cxx
+index 3e7b48e7af86..c334785d2bea 100644
+--- a/cui/source/dialogs/QrCodeGenDialog.cxx
++++ b/cui/source/dialogs/QrCodeGenDialog.cxx
+@@ -27,7 +27,6 @@
+ #endif
+
+ #include <BarcodeFormat.h>
+-#include <BitArray.h>
+ #include <BitMatrix.h>
+ #include <MultiFormatWriter.h>
+ #include <TextUtfEncoding.h>
+@@ -79,7 +78,6 @@ OString ConvertToSVGFormat(const ZXing::BitMatrix& bitmatrix)
+ OStringBuffer sb;
+ const int width = bitmatrix.width();
+ const int height = bitmatrix.height();
+- ZXing::BitArray row(width);
+ sb.append("<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n"
+ "<svg xmlns=\"http://www.w3.org/2000/svg\" version=\"1.1\" viewBox=\"0 0 "
+ + OString::number(width) + " " + OString::number(height)
+@@ -87,10 +85,9 @@ OString ConvertToSVGFormat(const ZXing::BitMatrix& bitmatrix)
+ "<path d=\"");
+ for (int i = 0; i < height; ++i)
+ {
+- bitmatrix.getRow(i, row);
+ for (int j = 0; j < width; ++j)
+ {
+- if (row.get(j))
++ if (bitmatrix.get(j, i))
+ {
+ sb.append("M" + OString::number(j) + "," + OString::number(i) + "h1v1h-1z");
+ }
+--
+2.38.1
+
--- /dev/null
+diff --git a/sysui/desktop/apparmor/program.soffice.bin b/sysui/desktop/apparmor/program.soffice.bin
+index 2fc7fd6b5735..3fd82b08431e 100644
+--- a/sysui/desktop/apparmor/program.soffice.bin
++++ b/sysui/desktop/apparmor/program.soffice.bin
+@@ -144,6 +144,9 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+ /usr/lib{,32,64}/jvm/** r,
+ /usr/lib{,32,64}/jvm/**/jre/bin/java mix,
+ /usr/lib{,32,64}/jvm/**/bin/java mix,
++ # should be included in the jvm/** above but there it is
++ # a symlink, so apparmor still doesn't allow it...
++ /etc/java-??-openjdk/security/java.security r,
+ INSTDIR-** rw,
+ INSTDIR-**.so m,
+ INSTDIR-program/soffice.bin mix,
--- /dev/null
+From b3c157faeb945fd689fcc8561a520d9e611a7419 Mon Sep 17 00:00:00 2001
+From: Vincas Dargis <vindrg@gmail.com>
+Date: Sat, 4 Aug 2018 17:40:05 +0300
+Subject: [PATCH] apparmor: use dri-enumerate abstraction
+
+Remove backported rule and use new dri-enumerate abstraction instead.
+dri-enumerate is available in AppArmor 2.13, which recently migrated
+into Debian Buster.
+
+Change-Id: I64919edc1882f7bc1e65cfb94686464c5350f699
+---
+ sysui/desktop/apparmor/program.soffice.bin | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/sysui/desktop/apparmor/program.soffice.bin b/sysui/desktop/apparmor/program.soffice.bin
+index 2fc7fd6b5735..33ad6f933ef6 100644
+--- a/sysui/desktop/apparmor/program.soffice.bin
++++ b/sysui/desktop/apparmor/program.soffice.bin
+@@ -82,6 +82,7 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+ #include <abstractions/dbus>
+ #include <abstractions/dbus-session>
+ #include <abstractions/dbus-accessibility>
++ #include <abstractions/dri-enumerate>
+ #include <abstractions/ibus>
+ #include <abstractions/nameservice>
+ #include <abstractions/gnome>
+@@ -179,7 +179,6 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+ #Likely moving to abstractions in the future
+ owner @{HOME}/.icons/*/cursors/* r,
+ /etc/fstab r, # Solid::DeviceNotifier::instance() TODO: deny?
+- /sys/devices/pci[0-9]*/**/{device,subsystem_device,subsystem_vendor,uevent,vendor} r, # for libdrm
+ /usr/share/*-fonts/conf.avail/*.conf r,
+ /usr/share/fonts-config/conf.avail/*.conf r,
+ /{,var/}run/udev/data/+usb:* r, # Solid::Device::listFromQuery()
+
--- /dev/null
+diff --git a/sysui/desktop/apparmor/program.oosplash b/sysui/desktop/apparmor/program.oosplash
+index fef54b7ee384..9dde31a63615 100644
+--- a/sysui/desktop/apparmor/program.oosplash
++++ b/sysui/desktop/apparmor/program.oosplash
+@@ -12,7 +12,7 @@
+
+ #include <tunables/global>
+
+-profile libreoffice-oosplash INSTDIR-program/oosplash {
++profile libreoffice-oosplash INSTDIR-program/oosplash flags=(complain) {
+ #include <abstractions/base>
+ #include <abstractions/X>
+
+diff --git a/sysui/desktop/apparmor/program.soffice.bin b/sysui/desktop/apparmor/program.soffice.bin
+index b4baeab8f5ee..7861c9eac9bd 100644
+--- a/sysui/desktop/apparmor/program.soffice.bin
++++ b/sysui/desktop/apparmor/program.soffice.bin
+@@ -60,7 +60,7 @@
+
+ #include <tunables/global>
+
+-profile libreoffice-soffice INSTDIR-program/soffice.bin {
++profile libreoffice-soffice INSTDIR-program/soffice.bin flags=(complain) {
+ #include <abstractions/private-files>
+
+ #include <abstractions/audio>
--- /dev/null
+From: Benjamin Barenblat <bbaren@google.com>
+Subject: Support tofu+pgp trust model in GnuPG
+Bug-Debian: https://bugs.debian.org/955271
+Forwarded: no
+
+GnuPG supports a trust-on-first-use layer that sits on top of the
+standard PGP trust model. If this is enabled, 'gpg --list-keys' needs
+write and lock permissions on the TOFU database to return any useful
+data. Allow this access through AppArmor.
+
+--- libreoffice-7.1.2.2/sysui/desktop/apparmor/program.soffice.bin
++++ libreoffice-7.1.2.2/sysui/desktop/apparmor/program.soffice.bin
+@@ -2,6 +2,7 @@
+ #
+ # Copyright (C) 2016 Canonical Ltd.
+ # Copyright (C) 2018 Software in the Public Interest, Inc.
++# Copyright (C) 2021 Google LLC
+ #
+ # This Source Code Form is subject to the terms of the Mozilla Public
+ # License, v. 2.0. If a copy of the MPL was not distributed with this
+@@ -215,6 +216,7 @@ profile gpg {
+
+ owner @{HOME}/.gnupg/* r,
+ owner @{HOME}/.gnupg/random_seed rk,
++ owner @{HOME}/.gnupg/tofu.db rwk,
+ }
+
+ # probably should become a subprofile like gpg above, but then it doesn't
--- /dev/null
+--- a/sysui/desktop/apparmor/program.soffice.bin-old 2018-11-09 23:04:59.858704214 +0100
++++ b/sysui/desktop/apparmor/program.soffice.bin 2018-11-09 23:05:28.050949237 +0100
+@@ -87,6 +87,7 @@
+ #include <abstractions/dbus-session>
+ #include <abstractions/dbus-accessibility>
+ #include <abstractions/dri-enumerate>
++ #include <abstractions/mesa>
+ #include <abstractions/ibus>
+ #include <abstractions/nameservice>
+ #include <abstractions/gnome>
--- /dev/null
+apparmor: Add opencl support
+
+AppArmor in Debian Buster now has OpenCL abstractions.
+
+Include OpenCL abstractions to fix OpenCL usage in Calc.
+Index: libreoffice-6.1.4/sysui/desktop/apparmor/program.soffice.bin
+===================================================================
+--- libreoffice-6.1.4.orig/sysui/desktop/apparmor/program.soffice.bin 2019-01-14 19:29:25.000000000 +0200
++++ libreoffice-6.1.4/sysui/desktop/apparmor/program.soffice.bin 2019-01-16 18:43:17.051781559 +0200
+@@ -98,6 +98,10 @@
+
+ #include <abstractions/user-tmp>
+
++ #include <abstractions/opencl-intel>
++ #include <abstractions/opencl-mesa>
++ #include <abstractions/opencl-nvidia>
++
+ #List directories for file browser
+ / r,
+ /**/ r,
--- /dev/null
+diff --git a/sysui/desktop/apparmor/program.soffice.bin b/sysui/desktop/apparmor/program.soffice.bin
+index 42053db2abef..2a60f67c2846 100644
+--- a/sysui/desktop/apparmor/program.soffice.bin
++++ b/sysui/desktop/apparmor/program.soffice.bin
+@@ -101,7 +108,7 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+ owner @{libo_user_dirs}/**/ rw, #allow creating directories that we own
+ owner @{libo_user_dirs}/**~lock.* rw, #lock file support
+ owner @{libo_user_dirs}/**.@{libreoffice_ext} rwk, #Open files rw with the right exts
+- owner @{libo_user_dirs}/{,**/}lu??????????{,?}.tmp rwk, #Temporary file used when saving
++ owner @{libo_user_dirs}/{,**/}lu????????{,?,??,???,????}.tmp rwk, #Temporary file used when saving
+ owner @{libo_user_dirs}/{,**/}.directory r, #Read directory settings on KDE
+
+ # Settings
--- /dev/null
+--- a/sysui/desktop/menus/startcenter.desktop
++++ b/sysui/desktop/menus/startcenter.desktop
+@@ -31,6 +31,7 @@ StartupNotify=true
+ X-GIO-NoFuse=true
+ StartupWMClass=libreoffice-startcenter
+ X-KDE-Protocols=file,http,ftp,webdav,webdavs
++X-AppStream-Ignore=True
+
+ ##Define Actions
+ Actions=Writer;Calc;Impress;Draw;Base;Math;
--- /dev/null
+Description: Explicitly set fpu mode on armhf
+Author: Rico Tzschichholz <ricotz@ubuntu.com>
+
+diff --git a/bridges/source/cpp_uno/gcc3_linux_arm/armhelper.S b/bridges/source/cpp_uno/gcc3_linux_arm/armhelper.S
+index 4eff3ff0a012..7996b9c5b3f0 100644
+--- a/bridges/source/cpp_uno/gcc3_linux_arm/armhelper.S
++++ b/bridges/source/cpp_uno/gcc3_linux_arm/armhelper.S
+@@ -51,6 +51,7 @@ privateSnippetExecutor:
+ mov r0, ip @ r0 points to functionoffset/vtable
+ mov r1, sp @ r1 points to this and params
+ #ifdef __ARM_PCS_VFP
++ .fpu vfpv2
+ vpush {d0-d7} @ floating point parameter on stack
+ #endif
+ UNWIND .pad #PAD @ throw this data away on exception
--- /dev/null
+From 7e61545966c61102aad56bbf10bae2edfbfa9226 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C4=90o=C3=A0n=20Tr=E1=BA=A7n=20C=C3=B4ng=20Danh?=
+ <congdanhqx@gmail.com>
+Date: Sun, 27 Nov 2022 18:59:24 +0700
+Subject: i18n: fix build with Boost 1.81.0
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Boost.Locale since 1.81.0 switch to enum classes for facet type [1].
+Switch our resource manager accordingly.
+
+1: https://github.com/boostorg/locale/commit/e5ed439ea39a4de915e9fb939cca95cae7d9d8d1
+
+Change-Id: Ief215363ceb79b2019606b20a7cde55c8df6a042
+Reviewed-on: https://gerrit.libreoffice.org/c/core/+/143343
+Reviewed-by: Heiko Becker <heirecka@exherbo.org>
+Tested-by: Caolán McNamara <caolanm@redhat.com>
+Reviewed-by: Caolán McNamara <caolanm@redhat.com>
+(cherry picked from commit 23dcd4339428e4080029ec5ae658e75f01e79a62)
+Reviewed-on: https://gerrit.libreoffice.org/c/core/+/144310
+Reviewed-by: Danh Doan <congdanhqx@gmail.com>
+Tested-by: Jenkins
+---
+ unotools/source/i18n/resmgr.cxx | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/unotools/source/i18n/resmgr.cxx b/unotools/source/i18n/resmgr.cxx
+index ddedf5b9e8a2..3a7116350062 100644
+--- a/unotools/source/i18n/resmgr.cxx
++++ b/unotools/source/i18n/resmgr.cxx
+@@ -127,8 +127,13 @@ namespace Translate
+ if (aFind != aCache.end())
+ return aFind->second;
+ boost::locale::generator gen;
++#if BOOST_VERSION < 108100
+ gen.characters(boost::locale::char_facet);
+ gen.categories(boost::locale::message_facet | boost::locale::information_facet);
++#else
++ gen.characters(boost::locale::char_facet_t::char_f);
++ gen.categories(boost::locale::category_t::message | boost::locale::category_t::information);
++#endif
+ #if defined(ANDROID)
+ OString sPath(OString(lo_get_app_data_dir()) + "/program/resource");
+ #else
+--
+cgit v1.2.1
+
--- /dev/null
+diff --git a/configure.ac b/configure.ac
+index cdae8b5..49f3ba2 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -9468,8 +9468,9 @@ if test "$with_system_lpsolve" = "yes"; then
+ # some systems need this. Like Ubuntu...
+ AC_CHECK_LIB(m, floor)
+ AC_CHECK_LIB(dl, dlopen)
++ AC_CHECK_LIB(colamd, colamd)
+ AC_CHECK_LIB([lpsolve55], [make_lp], [:],
+- [ AC_MSG_ERROR(lpsolve library not found or too old.)], [])
++ [ AC_MSG_ERROR(lpsolve library not found or too old.)], [-L/usr/lib/lp_solve])
+ LIBS=$save_LIBS
+ else
+ AC_MSG_RESULT([internal])
+diff --git a/RepositoryExternal.mk b/RepositoryExternal.mk
+index a4daea7..0dea12d 100644
+--- a/RepositoryExternal.mk
++++ b/RepositoryExternal.mk
+@@ -1961,6 +1961,7 @@ ifeq ($(WITH_LPSOLVER),lpsolve)
+
+ define gb_LinkTarget__use_lpsolve
+ $(call gb_LinkTarget_add_libs,$(1),-llpsolve55)
++$(call gb_LinkTarget_add_ldflags,$(1),-L/usr/lib/lp_solve -Wl$(COMMA)-rpath=/usr/lib/lp_solve)
+ $(call gb_LinkTarget_add_defs,$(1),\
+ -DSYSTEM_LPSOLVE \
+ )
--- /dev/null
+diff --git a/configure.ac b/configure.ac
+index c12fe95a561c..66d327ae8fb8 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -2047,6 +2047,11 @@ AC_ARG_WITH(bffvalidator,
+ See https://www.microsoft.com/en-us/download/details.aspx?id=26794]),
+ ,with_bffvalidator=no)
+
++libo_FUZZ_ARG_WITH(cppunit,
++ AS_HELP_STRING([--without-cppunit>],
++ [disable building(!) of cppunit stuff also built during make build]),
++,with_cppunit=yes)
++
+ libo_FUZZ_ARG_WITH(junit,
+ AS_HELP_STRING([--with-junit=<absolute path to JUnit 4 jar>],
+ [Specifies the JUnit 4 jar file to use for JUnit-based tests.
+@@ -7932,8 +7959,12 @@ dnl ===================================================================
+ dnl Check for system cppunit
+ dnl ===================================================================
+ if test "$_os" != "Android" ; then
++ if test "$with_cppunit" != "no"; then
+ libo_CHECK_SYSTEM_MODULE([cppunit],[CPPUNIT],[cppunit >= 1.14.0])
++ ENABLE_CPPUNIT=TRUE
++ fi
+ fi
++AC_SUBST(ENABLE_CPPUNIT)
+
+ dnl ===================================================================
+ dnl Check whether freetype is available
+diff --git a/config_host.mk.in b/config_host.mk.in
+index 8888355642ef..ac8a4b64967e 100644
+--- a/config_host.mk.in
++++ b/config_host.mk.in
+@@ -147,6 +147,7 @@ export ENABLE_COINMP=@ENABLE_COINMP@
+ export SYSTEM_COINMP=@SYSTEM_COINMP@
+ export COINMP_CFLAGS=@COINMP_CFLAGS@
+ export COINMP_LIBS=@COINMP_LIBS@
++export ENABLE_CPPUNIT=@ENABLE_CPPUNIT@
+ export ENABLE_CUPS=@ENABLE_CUPS@
+ export ENABLE_CURL=@ENABLE_CURL@
+ export ENABLE_DBGUTIL=@ENABLE_DBGUTIL@
+diff --git a/sal/Module_sal.mk b/sal/Module_sal.mk
+index fe9523a7a6e2..719edf8c6252 100644
+--- a/sal/Module_sal.mk
++++ b/sal/Module_sal.mk
+@@ -10,7 +10,6 @@
+ $(eval $(call gb_Module_Module,sal))
+
+ $(eval $(call gb_Module_add_targets,sal,\
+- $(if $(CROSS_COMPILING),,$(if $(filter TRUE,$(DISABLE_DYNLOADING)),,Executable_cppunittester)) \
+ $(if $(filter $(OS),ANDROID), \
+ Library_lo-bootstrap) \
+ Library_sal \
+@@ -33,4 +32,10 @@ $(eval $(call gb_Module_add_check_targets,sal,\
+
+ endif
+
++ifeq ($(ENABLE_CPPUNIT),TRUE)
++$(eval $(call gb_Module_add_check_targets,sal,\
++ $(if $(CROSS_COMPILING),,$(if $(filter TRUE,$(DISABLE_DYNLOADING)),,Executable_cppunittester)) \
++))
++endif
++
+ # vim: set noet sw=4 ts=4:
+diff --git a/sdext/Executable_pdf2xml.mk b/sdext/Executable_pdf2xml.mk
+index 373f40da36fd..c0401bef9c7a 100644
+--- a/sdext/Executable_pdf2xml.mk
++++ b/sdext/Executable_pdf2xml.mk
+@@ -13,10 +13,10 @@ $(eval $(call gb_Executable_use_sdk_api,pdf2xml))
+
+ $(eval $(call gb_Executable_use_externals,pdf2xml,\
+ boost_headers \
+- cppunit \
+ zlib \
+ ))
+
++
+ $(eval $(call gb_Executable_set_include,pdf2xml,\
+ -I$(SRCDIR)/sdext/source/pdfimport/inc \
+ $$(INCLUDE) \
+@@ -27,13 +27,21 @@ $(eval $(call gb_Executable_use_libraries,pdf2xml,\
+ comphelper \
+ cppu \
+- unotest \
+ cppuhelper \
+ sal \
+ tl \
+ xo \
+ i18nutil \
+ ))
+
++ifeq ($(ENABLE_CPPUNIT),TRUE)
++$(eval $(call gb_Executable_use_externals,pdf2xml,\
++ cppunit \
++))
++$(eval $(call gb_Executable_use_libraries,pdf2xml,\
++ unotest \
++))
++endif
++
+ $(eval $(call gb_Executable_use_library_objects,pdf2xml,pdfimport))
+
+ $(eval $(call gb_Executable_add_exception_objects,pdf2xml,\
+diff --git a/smoketest/Module_smoketest.mk b/smoketest/Module_smoketest.mk
+index 217dbfa6543a..fa2d0d489bd7 100644
+--- a/smoketest/Module_smoketest.mk
++++ b/smoketest/Module_smoketest.mk
+@@ -13,8 +13,12 @@ $(eval $(call gb_Module_Module,smoketest))
+ ifeq ($(CROSS_COMPILING),)
+
+ ifneq (,$(filter DESKTOP,$(BUILD_TYPE)))
++ifeq ($(ENABLE_CPPUNIT),TRUE)
+ $(eval $(call gb_Module_add_targets,smoketest,\
+ Library_smoketest \
++))
++endif
++$(eval $(call gb_Module_add_targets,smoketest,\
+ Zip_smoketestdoc \
+ ))
+ endif
+@@ -26,6 +30,7 @@ $(eval $(call gb_Module_add_targets,smoketest,\
+ endif
+ endif
+
++ifeq ($(ENABLE_CPPUNIT),TRUE)
+ ifneq (MACOSX/TRUE,$(OS)/$(ENABLE_MACOSX_SANDBOX))
+ ifneq ($(filter EXTENSIONS,$(BUILD_TYPE)),)
+ $(eval $(call gb_Module_add_subsequentcheck_targets,smoketest,\
+@@ -33,6 +38,7 @@ $(eval $(call gb_Module_add_subsequentcheck_targets,smoketest,\
+ ))
+ endif
+ endif
++endif
+
+ endif
+
+diff --git a/test/Module_test.mk b/test/Module_test.mk
+index e1051f16b5a0..d1787cb5789b 100644
+--- a/test/Module_test.mk
++++ b/test/Module_test.mk
+@@ -11,6 +11,7 @@ $(eval $(call gb_Module_Module,test))
+
+ ifneq (,$(filter DESKTOP,$(BUILD_TYPE)))
+
++ifeq ($(ENABLE_CPPUNIT),TRUE)
+ $(eval $(call gb_Module_add_targets,test,\
+ Library_test \
+ Library_test_setupvcl \
+@@ -18,6 +19,7 @@ $(eval $(call gb_Module_add_targets,test,\
+ $(eval $(call gb_Module_add_check_targets,test,\
+ CppunitTest_test_xpath \
+ ))
++endif
+
+ endif
+
+diff --git a/unotest/Module_unotest.mk b/unotest/Module_unotest.mk
+index bdffe8e8ac14..acdd4da6c539 100644
+--- a/unotest/Module_unotest.mk
++++ b/unotest/Module_unotest.mk
+@@ -12,12 +12,14 @@ $(eval $(call gb_Module_Module,unotest))
+
+ ifeq ($(gb_Side),host)
+ ifneq (,$(filter DESKTOP,$(BUILD_TYPE)))
++ifeq ($(ENABLE_CPPUNIT),TRUE)
+ $(eval $(call gb_Module_add_targets,unotest,\
+ Library_unobootstrapprotector \
+ Library_unoexceptionprotector \
+ Library_unotest \
+ ))
+ endif
++endif
+
+ ifneq ($(ENABLE_JAVA),)
+ $(eval $(call gb_Module_add_targets,unotest,\
+diff --git a/testtools/Module_testtools.mk b/testtools/Module_testtools.mk
+index a1b84e175b30..08e4aad24c11 100644
+--- a/testtools/Module_testtools.mk
++++ b/testtools/Module_testtools.mk
+@@ -11,6 +11,8 @@ $(eval $(call gb_Module_Module,testtools))
+
+ ifeq ($(CROSS_COMPILING),)
+
++ifeq ($(ENABLE_CPPUNIT),TRUE)
++
+ $(eval $(call gb_Module_add_targets,testtools,\
+ CustomTarget_bridgetest \
+ InternalUnoApi_bridgetest \
+@@ -41,4 +43,6 @@ $(eval $(call gb_Module_add_check_targets,testtools,\
+
+ endif
+
++endif
++
+ # vim:set noet sw=4 ts=4:
+diff --git a/Repository.mk b/Repository.mk
+index dbb628f2a6b3..4387e665624e 100644
+--- a/Repository.mk
++++ b/Repository.mk
+@@ -799,8 +805,12 @@ endif
+
+ # 'test_unittest' is only package delivering to workdir.
+ # Other packages could be potentially autoinstalled.
++ifeq ($(ENABLE_CPPUNIT),TRUE)
+ $(eval $(call gb_Helper_register_packages, \
+ test_unittest \
++))
++endif
++$(eval $(call gb_Helper_register_packages, \
+ cli_basetypes_copy \
+ extras_wordbook \
+ instsetoo_native_setup \
--- /dev/null
+diff --git a/solenv/gbuild/platform/com_GCC_defs.mk b/solenv/gbuild/platform/com_GCC_defs.mk
+index 9de88a2..9161a4e 100644
+--- a/solenv/gbuild/platform/com_GCC_defs.mk
++++ b/solenv/gbuild/platform/com_GCC_defs.mk
+@@ -170,6 +170,8 @@ gb_COMPILERNOOPTFLAGS := -O0 -fstrict-aliasing -fstrict-overflow
+ ifeq ($(OS),ANDROID)
+ gb_DEBUGINFO_FLAGS=-glldb
+ # Clang does not know -ggdb2 or some other options
++else ifeq ($(enable_symbols),SMALL)
++gb_DEBUGINFO_FLAGS=-g1
+ else ifeq ($(HAVE_GCC_GGDB2),TRUE)
+ gb_DEBUGINFO_FLAGS=-ggdb2
+ else
+diff --git a/configure.ac b/configure.ac
+index 2d62af9981a9..b1ad5a970700 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -4056,6 +4056,9 @@ fi
+ if test "$enable_symbols" = yes; then
+ ENABLE_SYMBOLS_FOR=all
+ AC_MSG_RESULT([yes])
++elif test "$enable_symbols" = "SMALL" -o "$enable_symbols" = "small"; then
++ ENABLE_SYMBOLS_FOR=all
++ AC_MSG_RESULT([yes, small ones])
+ elif test "$enable_symbols" = no; then
+ ENABLE_SYMBOLS_FOR=
+ AC_MSG_RESULT([no])
+@@ -4064,6 +4067,7 @@ else
+ ENABLE_SYMBOLS_FOR="$enable_symbols"
+ AC_MSG_RESULT([for "$enable_symbols"])
+ fi
++AC_SUBST(enable_symbols)
+ AC_SUBST(ENABLE_SYMBOLS_FOR)
+
+ if test -n "$with_android_ndk" -a \( -n "$ENABLE_SYMBOLS" -o -n "$ENABLE_DEBUG" -o -n "$ENABLE_DBGUTIL" \) -a "$ENABLE_DEBUGINFO_FOR" = "all"; then
+diff --git a/config_host.mk.in b/config_host.mk.in
+index 7df26713a1dd..174c4e50466c 100644
+--- a/config_host.mk.in
++++ b/config_host.mk.in
+@@ -208,6 +209,7 @@ export ENABLE_SDREMOTE_BLUETOOTH=@ENABLE_SDREMOTE_BLUETOOTH@
+ export ENABLE_SILENT_MSI=@ENABLE_SILENT_MSI@
+ export ENABLE_SKIA=@ENABLE_SKIA@
+ export ENABLE_SKIA_DEBUG=@ENABLE_SKIA_DEBUG@
++export enable_symbols=@enable_symbols@
+ export ENABLE_SYMBOLS_FOR=@ENABLE_SYMBOLS_FOR@
+ export ENABLE_VALGRIND=@ENABLE_VALGRIND@
+ export ENABLE_WASM_EXCEPTIONS=@ENABLE_WASM_EXCEPTIONS@
--- /dev/null
+--- a/configure.ac-old 2012-03-02 21:48:47.000000000 +0000
++++ b/configure.ac 2012-03-02 21:51:29.000000000 +0000
+@@ -10225,6 +10225,11 @@ else
+ AC_SUBST(GSTREAMER_1_0_LIBS)
+ AC_SUBST(ENABLE_GSTREAMER_1_0)
+
++if test -x /usr/bin/dpkg-buildflags; then
++ HARDEN_CPPFLAGS=`dpkg-buildflags --get CPPFLAGS 2>/dev/null`
++fi
++AC_SUBST(HARDEN_CPPFLAGS)
++
+ ENABLE_OPENGL_TRANSITIONS=
+ ENABLE_OPENGL_CANVAS=
+ if test $_os = iOS -o $_os = Android -o "$ENABLE_FUZZERS" = "TRUE"; then
+--- a/config_host.mk.in-old 2012-04-06 14:17:55.164239390 +0200
++++ b/config_host.mk.in 2012-04-06 14:18:55.440239065 +0200
+@@ -76,6 +76,7 @@
+ export CPPUNIT_LIBS=$(gb_SPACE)@CPPUNIT_LIBS@
+ export CPUNAME=@CPUNAME@
+ export CDEFAULTOPT=@CDEFAULTOPT@
++export HARDEN_CPPFLAGS=@HARDEN_CPPFLAGS@
+ export CROSS_COMPILING=@CROSS_COMPILING@
+ export CURL=@CURL@
+ export CURL_CFLAGS=$(gb_SPACE)@CURL_CFLAGS@
+diff --git a/solenv/gbuild/gbuild.mk b/solenv/gbuild/gbuild.mk
+index c71cb40..f826d65 100644
+--- a/solenv/gbuild/gbuild.mk
++++ b/solenv/gbuild/gbuild.mk
+@@ -259,6 +259,8 @@ gb_GLOBALDEFS += \
+ DISABLE_DYNLOADING \
+ )
+
++gb_GLOBALDEFS += $(HARDEN_CPPFLAGS)
++
+ gb_GLOBALDEFS := $(sort $(gb_GLOBALDEFS))
+
+ # Common environment variables passed into all gb_*Test classes:
--- /dev/null
+don't hardcode -fstack-protector-strong in configure.ac/gbuild. We get the
+hardening flags from dpkg-buildflags anyway.
+
+diff --git a/solenv/gbuild/platform/com_GCC_defs.mk b/solenv/gbuild/platform/com_GCC_defs.mk
+index 712a61df544f..0d50f538ba7b 100644
+--- a/solenv/gbuild/platform/com_GCC_defs.mk
++++ b/solenv/gbuild/platform/com_GCC_defs.mk
+@@ -67,7 +67,6 @@ gb_CFLAGS_COMMON := \
+ -fmessage-length=0 \
+ -fno-common \
+ -pipe \
+- $(if $(filter EMSCRIPTEN,$(OS)),-fno-stack-protector,-fstack-protector-strong) \
+
+ gb_CXXFLAGS_COMMON := \
+ -Wall \
+@@ -82,7 +81,6 @@ gb_CXXFLAGS_COMMON := \
+ -fmessage-length=0 \
+ -fno-common \
+ -pipe \
+- $(if $(filter EMSCRIPTEN,$(OS)),-fno-stack-protector,-fstack-protector-strong) \
+
+ ifeq ($(HAVE_WDEPRECATED_COPY_DTOR),TRUE)
+ gb_CXXFLAGS_COMMON += -Wdeprecated-copy-dtor
+@@ -136,8 +134,6 @@ endif
+ gb_VISIBILITY_FLAGS_CXX := -fvisibility-inlines-hidden
+ gb_CXXFLAGS_COMMON += $(gb_VISIBILITY_FLAGS_CXX)
+
+-gb_LinkTarget_LDFLAGS += $(if $(filter EMSCRIPTEN,$(OS)),-fno-stack-protector,-fstack-protector-strong)
+-
+ ifneq ($(gb_ENABLE_PCH),)
+ ifeq ($(COM_IS_CLANG),TRUE)
+ # Clang by default includes in the PCH timestamps of the files it was
--- /dev/null
+diff --git a/configure.ac b/configure.ac
+index f06ef8e..91ce612 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -12776,6 +12776,9 @@ fi
+ fi
+ fi
+
++CDEFAULTOPT=`echo $CFLAGS 2>/dev/null | grep -E -o "\-O[[0-3]]"`
++AC_SUBST(CDEFAULTOPT)
++
+ dnl ===================================================================
+ dnl Setting up the environment.
+ dnl ===================================================================
+diff --git a/config_host.mk.in b/config_host.mk.in
+index 1ec3268..abb45b1 100644
+--- a/config_host.mk.in
++++ b/config_host.mk.in
+@@ -69,6 +69,7 @@ export CPP_LIBRARY=@CPP_LIBRARY@
+ export CPPUNIT_CFLAGS=$(gb_SPACE)@CPPUNIT_CFLAGS@
+ export CPPUNIT_LIBS=$(gb_SPACE)@CPPUNIT_LIBS@
+ export CPUNAME=@CPUNAME@
++export CDEFAULTOPT=@CDEFAULTOPT@
+ export CROSS_COMPILING=@CROSS_COMPILING@
+ export CURL=@CURL@
+ export CURL_CFLAGS=$(gb_SPACE)@CURL_CFLAGS@
--- /dev/null
+14:13 < mst__> _rene_, the toolkit unoapi tests are known to be flaky (in some
+ system dependent way) e.g. on the Win@6 tinderbox it always
+ crashes
+14:14 < mst__> _rene_, sc.ScAccessible* tests also fail on some systems some of
+ the time
+
+diff --git a/toolkit/Module_toolkit.mk b/toolkit/Module_toolkit.mk
+index 25db0b6..14e507c 100644
+--- a/toolkit/Module_toolkit.mk
++++ b/toolkit/Module_toolkit.mk
+@@ -26,11 +26,11 @@ $(eval $(call gb_Module_add_targets,toolkit,\
+ ifneq ($(OOO_JUNIT_JAR),)
+ $(eval $(call gb_Module_add_subsequentcheck_targets,toolkit,\
+ JunitTest_toolkit_complex \
+- JunitTest_toolkit_unoapi_1 \
+- JunitTest_toolkit_unoapi_2 \
+- JunitTest_toolkit_unoapi_3 \
+- JunitTest_toolkit_unoapi_4 \
+ ))
+ endif
++# JunitTest_toolkit_unoapi_1 \
++# JunitTest_toolkit_unoapi_2 \
++# JunitTest_toolkit_unoapi_3 \
++# JunitTest_toolkit_unoapi_4 \
+
+ # vim: set noet sw=4 ts=4:
+diff --git a/sc/qa/unoapi/sc_1.sce b/sc/qa/unoapi/sc_1.sce
+index fa1684c..cc8e1a5 100644
+--- a/sc/qa/unoapi/sc_1.sce
++++ b/sc/qa/unoapi/sc_1.sce
+@@ -24,10 +24,3 @@
+ # i84554 -o sc.AccessibleEditableTextPara_PreviewNote
+ # i88241 -o sc.AccessibleEditableTextPara_HeaderFooter
+ -o sc.AccessibleEditableTextPara_PreviewCell
+--o sc.ScAccessibleCell
+-# i91044 -o sc.ScAccessibleCsvCell
+-# i91044 -o sc.ScAccessibleCsvGrid
+-# i84641 -o sc.ScAccessibleCsvRuler
+-# i88330 -o sc.ScAccessibleDocument
+-# i91045 -o sc.ScAccessibleDocumentPagePreview
+--o sc.ScAccessiblePageHeader
+diff --git a/sc/qa/unoapi/sc_2.sce b/sc/qa/unoapi/sc_2.sce
+index dbfc3e1..d235c5d 100644
+--- a/sc/qa/unoapi/sc_2.sce
++++ b/sc/qa/unoapi/sc_2.sce
+@@ -15,11 +15,6 @@
+ # except in compliance with the License. You may obtain a copy of
+ # the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ #
+-# fdo#FOO -o sc.ScAccessiblePageHeaderArea
+--o sc.ScAccessiblePreviewCell
+--o sc.ScAccessiblePreviewHeaderCell
+--o sc.ScAccessiblePreviewTable
+-# fdo#45337 -o sc.ScAccessibleSpreadsheet
+ # FIXME_REMOVE_WHEN_RE_BASE_COMPLETE
+ # -o sc.ScAnnotationShapeObj
+ -o sc.ScAutoFormatFieldObj
+
+diff --git a/svx/qa/unoapi/svx.sce b/svx/qa/unoapi/svx.sce
+index 1c3925f..a16f001 100644
+--- a/svx/qa/unoapi/svx.sce
++++ b/svx/qa/unoapi/svx.sce
+@@ -25,7 +25,7 @@
+ #i111216 -o svx.AccessiblePresentationGraphicShape
+ #i111216 -o svx.AccessiblePresentationOLEShape
+ #i85539 -o svx.AccessiblePresentationShape
+--o svx.AccessibleShape
++#-o svx.AccessibleShape
+ #i90294 -o svx.GraphicExporter
+ -o svx.SvxDrawPage
+ #i85501 -o svx.SvxGraphCtrlAccessibleContext
+
+19:26 <@x1sc0> _rene_, since that test is using exact dimensions, it seems it
+ fails on your side probably because the paragraph style is
+ different. 1. I will change the test to avoid the exact
+ dimensions. 2. meantime you can skip that test:
+https://cgit.freedesktop.org/libreoffice/core/commit/?id=e05f16e6bf36efbaab16dd2ed1427a750ce7cafd
+19:26 < IZBot> core - disable UI test that does exact comparison
+19:27 < _rene_> mmh, ok, saw that but that was for a different test, so.. :)
+19:27 -!- jacobo [~jaragunde@fanzine.igalia.com] has quit [Quit: Leaving.]
+19:27 < _rene_> thanks, will do
+
+diff --git a/uitest/writer_tests/tdf79236.py b/uitest/writer_tests/tdf79236.py
+index 8585e48d8c64..704f42c009a1 100644
+--- a/sw/qa/uitest/writer_tests3/tdf79236.py
++++ b/sw/qa/uitest/writer_tests3/tdf79236.py
+@@ -8,8 +8,11 @@ from uitest.framework import UITestCase
+ from uitest.framework import UITestCase
+ from uitest.uihelper.common import type_text
+
++import unittest
++
+ class tdf79236(UITestCase):
+
++ @unittest.skip("Currently broken")
+ def test_paragraph(self):
+
+ with self.ui_test.create_doc_in_start_center("writer") as document:
+
+14:39 < ztamas> _rene_: chart2dump is used to fail because of font size differences, just use a bigger delta or disable it if it
+ fails for you.
+14:40 <@sberg_> noelgrandin, no
+14:40 < noelgrandin> sberg_, sure seems that way both in the debugger and in the resulting SAL_WARN output
+14:42 < ztamas> _rene_: there were some work on making font rendering consistent on different platforms, but it's not finished
+ yet, I guess
+diff --git a/chart2/Module_chart2.mk b/chart2/Module_chart2.mk
+index 37acfdc3730f..7d26342f179f 100644
+--- a/chart2/Module_chart2.mk
++++ b/chart2/Module_chart2.mk
+@@ -33,9 +33,9 @@ $(eval $(call gb_Module_add_slowcheck_targets,chart2,\
+ CppunitTest_chart2_import2 \
+ CppunitTest_chart2_trendcalculators \
+- CppunitTest_chart2_dump \
+ CppunitTest_chart2_pivot_chart_test \
+ CppunitTest_chart2_geometry \
+ ))
++# CppunitTest_chart2_dump \
+
+ ifeq ($(ENABLE_CHART_TESTS),TRUE)
+ ifeq ($(WITH_FONTS), TRUE)
--- /dev/null
+diff --git a/config_host.mk.in b/config_host.mk.in
+index 6cea6ccf795e..d08fac922239 100644
+--- a/config_host.mk.in
++++ b/config_host.mk.in
+@@ -324,6 +324,7 @@ export JAVAIFLAGS=@JAVAIFLAGS@
+ export JAVAIFLAGS_FOR_BUILD=@JAVAIFLAGS_FOR_BUILD@
+ export JAVA_CLASSPATH_NOT_SET=@JAVA_CLASSPATH_NOT_SET@
+ export JAVAINTERPRETER=@JAVAINTERPRETER@
++export JAVA_HAS_ZERO_VM=@JAVA_HAS_ZERO_VM@
+ export JAVA_HOME=@JAVA_HOME@
+ export JAVA_HOME_FOR_BUILD=@JAVA_HOME_FOR_BUILD@
+ export JAVA_SOURCE_VER=@JAVA_SOURCE_VER@
+diff --git a/configure.ac b/configure.ac
+index 06398bfa99a7..06835ae884c4 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -7826,6 +7826,14 @@ if test "$ENABLE_JAVA" != "" -a "$cross_compiling" != "yes"; then
+ JAVAIFLAGS=-Xmx64M
+ # set to limit VM usage for javac
+ JAVACFLAGS=-J-Xmx128M
++
++ AC_MSG_CHECKING([whether $JAVAINTERPRETER is using the Zero VM])
++ if $JAVAINTERPRETER -version 2>&1 | grep -q Zero; then
++ JAVA_HAS_ZERO_VM=y
++ AC_MSG_RESULT([yes])
++ else
++ AC_MSG_RESULT([no])
++ fi
+ fi
+ else
+ AC_MSG_ERROR([Java not found. You need at least JDK 9])
+@@ -7841,6 +7849,7 @@ else
+ JAVAIFLAGS=$JAVAIFLAGS_FOR_BUILD
+ fi
+ fi
++AC_SUBST(JAVA_HAS_ZERO_VM)
+
+ dnl ===================================================================
+ dnl Checks for javac
+diff --git a/odk/Module_odk.mk b/odk/Module_odk.mk
+index 410f8cf8ef1e..bd05d4bba200 100644
+--- a/odk/Module_odk.mk
++++ b/odk/Module_odk.mk
+@@ -60,10 +62,14 @@ $(eval $(call gb_Module_add_check_targets,odk,\
+ ifneq ($(filter $(OS),LINUX MACOSX),)
+ $(eval $(call gb_Module_add_subsequentcheck_targets,odk, \
+ CustomTarget_build-examples \
++))
++ifneq ($(JAVA_HAS_ZERO_VM),y)
++$(eval $(call gb_Module_add_subsequentcheck_targets,odk, \
+ $(if $(ENABLE_JAVA),\
+ CustomTarget_build-examples_java \
+ ) \
+ ))
+ endif
++endif
+
+ # vim: set noet sw=4 ts=4:
--- /dev/null
+--- a/cui/qa/uitest/dialogs/shortcuts.py 2021-07-02 21:00:52.565424890 +0200
++++ /dev/null 2021-06-19 15:31:01.435382997 +0200
+@@ -1,39 +0,0 @@
+-# -*- tab-width: 4; indent-tabs-mode: nil; py-indent-offset: 4 -*-
+-#
+-# This Source Code Form is subject to the terms of the Mozilla Public
+-# License, v. 2.0. If a copy of the MPL was not distributed with this
+-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+-#
+-
+-from uitest.framework import UITestCase
+-from uitest.uihelper.common import select_pos
+-from libreoffice.uno.propertyvalue import mkPropertyValues
+-from uitest.uihelper.common import get_state_as_dict
+-
+-class Test(UITestCase):
+-
+- def test_tab_navigation(self):
+- with self.ui_test.create_doc_in_start_center("writer"):
+- xWriterDoc = self.xUITest.getTopFocusWindow()
+- xWriterEdit = xWriterDoc.getChild("writer_edit")
+-
+- with self.ui_test.execute_dialog_through_command(".uno:EditStyle") as xDialog:
+-
+- xTabs = xDialog.getChild("tabcontrol")
+- select_pos(xTabs, "0")
+-
+- for i in range(16):
+- self.assertEqual(get_state_as_dict(xTabs)["CurrPagePos"], str(i))
+-
+- xTabs.executeAction("TYPE", mkPropertyValues({"KEYCODE":"CTRL+PAGEDOWN"}))
+-
+- self.assertEqual(get_state_as_dict(xTabs)["CurrPagePos"], "0")
+-
+- for i in reversed(range(16)):
+- xTabs.executeAction("TYPE", mkPropertyValues({"KEYCODE":"CTRL+PAGEUP"}))
+-
+- self.assertEqual(get_state_as_dict(xTabs)["CurrPagePos"], str(i))
+-
+-
+-
+-# vim: set shiftwidth=4 softtabstop=4 expandtab:
--- /dev/null
+diff --git a/vcl/Module_vcl.mk b/vcl/Module_vcl.mk
+index a5e4bf5d68d2..3e9e1bf9fe27 100644
+--- a/vcl/Module_vcl.mk
++++ b/vcl/Module_vcl.mk
+@@ -28,28 +28,9 @@ $(eval $(call gb_Module_add_targets,vcl,\
+ StaticLibrary_vclmain \
+ $(if $(ENABLE_MACOSX_SANDBOX),, \
+ $(if $(DISABLE_GUI),, \
+- Executable_ui-previewer)) \
+- $(if $(filter LINUX MACOSX SOLARIS WNT %BSD,$(OS)), \
+- Executable_outdevgrind \
+- $(if $(DISABLE_GUI),, \
+- Executable_vcldemo \
+- Executable_icontest \
+- Executable_visualbackendtest \
+- Executable_mtfdemo ))) \
++ Executable_ui-previewer))) \
+ ))
+
+-ifeq ($(CROSS_COMPILING)$(DISABLE_DYNLOADING),)
+-
+-$(eval $(call gb_Module_add_targets,vcl,\
+- $(if $(filter-out ANDROID iOS WNT,$(OS)), \
+- Executable_svdemo \
+- Executable_fftester \
+- Executable_svptest \
+- Executable_svpclient) \
+-))
+-
+-endif
+-
+ $(eval $(call gb_Module_add_l10n_targets,vcl,\
+ AllLangMoTarget_vcl \
+ ))
+diff --git a/xmlsecurity/Module_xmlsecurity.mk b/xmlsecurity/Module_xmlsecurity.mk
+index d3fafeb7e4ec..87b8c067903e 100644
+--- a/xmlsecurity/Module_xmlsecurity.mk
++++ b/xmlsecurity/Module_xmlsecurity.mk
+@@ -45,14 +45,6 @@ $(eval $(call gb_Module_add_screenshot_targets,xmlsecurity,\
+ CppunitTest_xmlsecurity_dialogs_test \
+ ))
+
+-ifneq (,$(filter DESKTOP,$(BUILD_TYPE)))
+-
+-$(eval $(call gb_Module_add_targets,xmlsecurity,\
+- Executable_pdfverify \
+-))
+-
+-endif
+-
+ endif
+
+ # vim: set noet sw=4 ts=4:
+diff --git a/libreofficekit/Module_libreofficekit.mk b/libreofficekit/Module_libreofficekit.mk
+index 351f89a33e48..defe0b14a681 100644
+--- a/libreofficekit/Module_libreofficekit.mk
++++ b/libreofficekit/Module_libreofficekit.mk
+@@ -23,12 +23,10 @@ $(eval $(call gb_Module_add_check_targets,libreofficekit, \
+ ifneq ($(ENABLE_GTK3),)
+ $(eval $(call gb_Module_add_targets,libreofficekit,\
+ Library_libreofficekitgtk \
+- Executable_gtktiledviewer \
+ ))
+ endif # ($(ENABLE_GTK3),)
+
+ $(eval $(call gb_Module_add_targets,libreofficekit,\
+- Executable_tilebench \
+ Package_selectionhandles \
+ UIConfig_libreofficekit \
+ ))
--- /dev/null
+--- a/configure.ac-old 2020-09-13 14:08:41.553174902 +0200
++++ b/configure.ac 2020-09-13 14:08:54.365300591 +0200
+@@ -7833,6 +7833,7 @@
+
+ # set to limit VM usage for JunitTests
+ JAVAIFLAGS=-Xmx64M
++ JAVAIFLAGS="$JAVAIFLAGS -Djdk.net.URLClassPath.disableClassPathURLCheck=true"
+ # set to limit VM usage for javac
+ JAVACFLAGS=-J-Xmx128M
+
--- /dev/null
+diff --git a/sw/CppunitTest_sw_core_layout.mk b/sw/CppunitTest_sw_core_layout.mk
+index 80dc1530fdb3..2cae001add53 100644
+--- a/sw/CppunitTest_sw_core_layout.mk
++++ b/sw/CppunitTest_sw_core_layout.mk
+@@ -71,11 +71,6 @@ $(eval $(call gb_CppunitTest_use_uiconfigs,sw_core_layout, \
+ svx \
+ ))
+
+-# assert if font/glyph fallback occurs
+-$(call gb_CppunitTest_get_target,sw_core_layout): \
+- EXTRA_ENV_VARS := \
+- SAL_ABORT_ON_NON_APPLICATION_FONT_USE=1
+-
+ $(eval $(call gb_CppunitTest_use_more_fonts,sw_core_layout))
+
+ # vim: set noet sw=4 ts=4:
+diff --git a/sw/layoutwriter_setup.mk b/sw/layoutwriter_setup.mk
+index 9d10fa9ac2c6..cd0d86b7f98c 100644
+--- a/sw/layoutwriter_setup.mk
++++ b/sw/layoutwriter_setup.mk
+@@ -82,11 +82,6 @@ $(eval $(call gb_CppunitTest_use_uiconfigs,sw_layoutwriter$(1), \
+ $(call gb_CppunitTest_get_target,sw_layoutwriter$(1)): \
+ $(call gb_Library_get_target,textconv_dict)
+
+-# assert if font/glyph fallback occurs
+-$(call gb_CppunitTest_get_target,sw_layoutwriter$(1)): \
+- EXTRA_ENV_VARS := \
+- SAL_ABORT_ON_NON_APPLICATION_FONT_USE=1
+-
+ $(eval $(call gb_CppunitTest_use_more_fonts,sw_layoutwriter$(1)))
+
+ endef
--- /dev/null
+diff --git a/odk/build-examples_common.mk b/odk/build-examples_common.mk
+index abcb3a3e2593..35d45ad23413 100644
+--- a/odk/build-examples_common.mk
++++ b/odk/build-examples_common.mk
+@@ -49,12 +49,7 @@ else
+ && printf 'yes\n' | LC_ALL=C make -j1 \
+ CC="$(CXX)" LINK="$(CXX)" LIB="$(CXX)" \
+ $(if $(MACOSX_SHELL_HACK), SHELL="$$$$ODK_BUILD_SHELL", ))) \
+- $(if $(MACOSX_SHELL_HACK),&& rm -f "$$$$ODK_BUILD_SHELL")) \
+- >$(call gb_CustomTarget_get_workdir,$(1))/log 2>&1 \
+- || (RET=$$$$? \
+- $(if $(MACOSX_SHELL_HACK), && rm -f "$$$$ODK_BUILD_SHELL" , ) \
+- && cat $(call gb_CustomTarget_get_workdir,$(1))/log \
+- && exit $$$$RET)
++ 2>&1 )
+ endif
+
+ $(call gb_CustomTarget_get_workdir,$(1))/setsdkenv: \
+diff --git a/solenv/gbuild/CppunitTest.mk b/solenv/gbuild/CppunitTest.mk
+index 45af5c9b25a7..7933fc84c8b2 100644
+--- a/solenv/gbuild/CppunitTest.mk
++++ b/solenv/gbuild/CppunitTest.mk
+@@ -139,12 +139,7 @@ else
+ $(call gb_CppunitTest__make_args) "-env:CPPUNITTESTTARGET=$@" \
+ $(if $(gb_CppunitTest_localized),|| exit $$?; done) \
+ ) \
+- $(if $(gb_CppunitTest__interactive),, \
+- > $@.log 2>&1 \
+- || ($(if $(value gb_CppunitTest_postprocess), \
+- RET=$$?; \
+- $(call gb_CppunitTest_postprocess,$(gb_CppunitTest_CPPTESTCOMMAND),$@.core,$$RET) >> $@.log 2>&1;) \
+- cat $@.log; $(gb_CppunitTest_UNITTESTFAILED) Cppunit $*)))
++ 2>&1)
+ $(call gb_Trace_EndRange,$*,CUT)
+ endif
+
+diff --git a/solenv/gbuild/JunitTest.mk b/solenv/gbuild/JunitTest.mk
+index 36f29b50ef28..3ac4603ff6a0 100644
+--- a/solenv/gbuild/JunitTest.mk
++++ b/solenv/gbuild/JunitTest.mk
+@@ -44,17 +44,7 @@ else
+ -classpath "$(T_CP)" \
+ $(DEFS) \
+ org.junit.runner.JUnitCore \
+- $(CLASSES) > $@.log 2>&1 || \
+- (cat $@.log \
+- && echo "to rerun just this failed test without all others, run:" \
+- && echo && echo " make JunitTest_$*" && echo \
+- && echo "cd into the module dir to run the tests faster" \
+- && echo "Or to do interactive debugging, run two shells with:" \
+- && echo \
+- && echo " make debugrun" \
+- && echo " make gb_JunitTest_DEBUGRUN=T JunitTest_$*" \
+- && echo \
+- && false)))
++ $(CLASSES) 2>&1))
+ $(CLEAN_CMD)
+ $(call gb_Trace_EndRange,$*,JUT)
+ endif
+diff --git a/solenv/gbuild/UITest.mk b/solenv/gbuild/UITest.mk
+index 03d30448ef7b..5628e47866f8 100644
+--- a/solenv/gbuild/UITest.mk
++++ b/solenv/gbuild/UITest.mk
+@@ -77,16 +77,7 @@ else
+ --userdir=$(call gb_Helper_make_url,$(dir $(call gb_UITest_get_target,$*))user) \
+ --dir=$(strip $(MODULES)) \
+ $(gb_UITest_GDBTRACE) \
+- $(if $(gb_UITest__interactive),, \
+- > $@.log 2>&1 \
+- || ($(if $(value gb_CppunitTest_postprocess), \
+- RET=$$?; \
+- $(call gb_CppunitTest_postprocess,$(gb_UITest_EXECUTABLE_GDB),$@.core,$$RET) >> $@.log 2>&1;) \
+- $(if $(filter WNT,$(OS)), \
+- printf '%s: <<<\n' $(dir $(call gb_UITest_get_target,$*))/soffice.out.log; \
+- cat $(dir $(call gb_UITest_get_target,$*))/soffice.out.log; \
+- printf ' >>>\n\n';) \
+- cat $@.log; $(gb_UITest_UNITTESTFAILED) UI $*))))
++ 2>&1))
+ $(call gb_Trace_EndRange,$*,UIT)
+ endif
+
+diff --git a/solenv/gbuild/PythonTest.mk b/solenv/gbuild/PythonTest.mk
+index bc404d4fb817..f605634d3d07 100644
+--- a/solenv/gbuild/PythonTest.mk
++++ b/solenv/gbuild/PythonTest.mk
+@@ -67,12 +67,7 @@ else
+ $(gb_PythonTest_COMMAND) \
+ $(if $(PYTHON_TEST_NAME),$(PYTHON_TEST_NAME),$(MODULES)) \
+ ; } \
+- $(if $(gb_CppunitTest__interactive),, \
+- > $@.log 2>&1 \
+- || ($(if $(value gb_CppunitTest_postprocess), \
+- RET=$$?; \
+- $(call gb_CppunitTest_postprocess,$(gb_PythonTest_EXECUTABLE_GDB),$@.core,$$RET) >> $@.log 2>&1;) \
+- cat $@.log; $(gb_PythonTest_UNITTESTFAILED) Python $*)))
++ 2>&1)
+ $(call gb_Trace_EndRange,$*,PYT)
+ endif
+
--- /dev/null
+18:43 <@_rene_> hmm. /me wonders why after a rm config.status autogen.lastrun
+ and a re-configure (and make clean for odk/scp2/scripting) LO
+ master tries to rebuild offapi/udkapi again?
+18:44 <@_rene_> this a) takes with cpp instead of ucpp and b) causes all kind
+ of stuff "down" to be rebuilt.... :(
+18:44 <@_rene_> which is extremely bad.
+18:44 <@_rene_> if it isn't solvable easily: what to touch to prevent it from
+ doing that? :-)
+18:45 < loirkerbot> LibreOffice (core) mstahl * desktop/source/app/main.c:
+ desktop: tweak xmlCleanupParser hack: disable on return
+ from main
+18:46 < mst__> _rene_, did you switch between --with-system-ucpp and without?
+ that should rebuild IDL file...
+18:47 <@_rene_> nah, first run is just --disable-help, --disable-scripting etc
+18:47 <@_rene_> and the second run does that
+18:47 <@_rene_> (first pass to "just" build what is needed for arch-specific
+ stuff)
+18:48 <@_rene_> (and I am not using ucpp at all, but cpp ;))
+18:51 < mst__> _rene_, hmm don't know why that would happen then... you could
+ try running second make with -d and redirect to a file, but
+ beware that file will be huge... then grep for "Must
+ remake.*urd" or something should give you the problem area
+18:59 -!- reisi007 [~chatzilla@cpe90-146-226-33.liwest.at] has quit [Quit:
+ ChatZilla 0.9.89 [Firefox 14.0.1/20120713134347]]
+19:00 -!- crossmanith_ [~cr@p3E9EAEF6.dip.t-dialin.net] has joined
+ #libreoffice-dev
+19:00 -!- erAck_away is now known as erAck
+19:05 -!- cbosdonnat [~cbosdo@ALyon-651-1-309-127.w90-14.abo.wanadoo.fr] has
+ quit [Quit: Leaving]
+19:07 <@_rene_> mst__: ok, starting a new build, let's see
+[...]
+10:36 <@_rene_> mst__: nothing interesting there instead of the loads of
+ touch'es...
+10:36 <@_rene_> mst__: butI just removed the touch from the UnoApiTarget and
+ let's see now :)
+10:36 -!- erAck [~erathke@f054050047.adsl.alicedsl.de] has joined
+ #libreoffice-dev
+10:36 -!- mode/#libreoffice-dev [+o erAck] by ChanServ
+10:36 <@_rene_> $(call gb_UnoApiPartTarget_get_target,%.urd) :
+10:36 <@_rene_> - touch $@
+10:36 <@_rene_> +
+[...]
+10:38 < mst__> _rene_, there must be something interesting there: preceding the
+ "Must remake.*urd" line there must be some line that says target
+ "foo" is "newer" than the .urd and therefor it will be rebuilt
+[...]
+10:40 <@_rene_> mst__: I didn't see anything there, no ".*urd*muss neu"
+10:41 < mst__> _rene_, there must be a message like that immediately preceding
+ running the touch command
+10:41 -!- pepp [~pierre-er@vaf26-6-78-248-2-61.fbx.proxad.net] has joined
+ #libreoffice-dev
+10:42 <@vmiklos> mst__: makes sense.
+10:42 -!- matus [~ubuntu@adsl-dyn17.78-98-107.t-com.sk] has joined
+ #libreoffice-dev
+10:42 <@_rene_> as said, there was done. I don't think I oversaw it
+10:43 <@_rene_> but can try again later, for now I will just keep removing the
+ touch. according to the comment this shoudln't do harm
+10:43 < mst__> _rene_, removing it will break incremental builds iirc
+10:44 <@_rene_> but only if you change idl stuff inbetween
+10:44 <@_rene_> which won't happen that often in package builds ;)
+10:44 < mst__> _rene_, exactly
+10:44 -!- Fridrich [~fridrich@71-99.199-178.cust.bluewin.ch] has joined
+ #libreoffice-dev
+10:44 -!- mode/#libreoffice-dev [+o Fridrich] by ChanServ
+10:45 <@_rene_> (when I am out of "use git", only when there's a new
+ (pre-)release"
+
+diff --git a/solenv/gbuild/UnoApiTarget.mk b/solenv/gbuild/UnoApiTarget.mk
+index 98734ab..b281a84 100644
+--- a/solenv/gbuild/UnoApiTarget.mk
++++ b/solenv/gbuild/UnoApiTarget.mk
+@@ -46,7 +46,7 @@ $(dir $(call gb_UnoApiPartTarget_get_target,))%/.dir :
+ $(if $(wildcard $(dir $@)),,mkdir -p $(dir $@))
+
+ $(call gb_UnoApiPartTarget_get_target,%.urd) :
+- touch $@
++
+
+ # TODO:
+ # - get idlc switch "-P" (generate .urd into package dir)
--- /dev/null
+diff --git a/configure.ac b/configure.ac
+index f6937648fe2d..6ccf3bcccf24 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -10626,7 +10670,7 @@ if test "$with_system_dragonbox" = "yes"; then
+ AC_LANG_PUSH([C++])
+ save_CPPFLAGS=$CPPFLAGS
+ # This is where upstream installs to, unfortunately no .pc or so...
+- DRAGONBOX_CFLAGS=-I/usr/include/dragonbox-1.0.0
++ DRAGONBOX_CFLAGS=-I/usr/include/dragonbox-1.1.3
+ CPPFLAGS="$CPPFLAGS $DRAGONBOX_CFLAGS"
+ AC_CHECK_HEADER([dragonbox/dragonbox.h], [],
+ [AC_MSG_ERROR([dragonbox/dragonbox.h not found. install dragonbox])], [])
--- /dev/null
+Description: Add safer float comparisons to bridgetest equals()
+Author: Marcus Tomlinson <marcus.tomlinson@canonical.com>
+Bug-Ubuntu: https://launchpad.net/bugs/1832360
+
+--- a/testtools/source/bridgetest/bridgetest.cxx
++++ b/testtools/source/bridgetest/bridgetest.cxx
+@@ -124,6 +125,9 @@ public:
+
+ static bool equals( const TestElement & rData1, const TestElement & rData2 )
+ {
++ const float epsilon_f = 0.00001f;
++ const double epsilon_d = 0.000000000001;
++
+ check( rData1.Bool == rData2.Bool, "### bool does not match!" );
+ check( rData1.Char == rData2.Char, "### char does not match!" );
+ check( rData1.Byte == rData2.Byte, "### byte does not match!" );
+@@ -133,8 +137,8 @@ static bool equals( const TestElement & rData1, const TestElement & rData2 )
+ check( rData1.ULong == rData2.ULong, "### unsigned long does not match!" );
+ check( rData1.Hyper == rData2.Hyper, "### hyper does not match!" );
+ check( rData1.UHyper == rData2.UHyper, "### unsigned hyper does not match!" );
+- check( rData1.Float == rData2.Float, "### float does not match!" );
+- check( rData1.Double == rData2.Double, "### double does not match!" );
++ check( fabs( rData1.Float - rData2.Float ) < epsilon_f, "### float does not match!" );
++ check( fabs( rData1.Double - rData2.Double ) < epsilon_d, "### double does not match!" );
+ check( rData1.Enum == rData2.Enum, "### enum does not match!" );
+ check( rData1.String == rData2.String, "### string does not match!" );
+ check( rData1.Byte2 == rData2.Byte2, "### byte2 does not match!" );
+@@ -149,8 +153,8 @@ static bool equals( const TestElement & rData1, const TestElement & rData2 )
+ rData1.ULong == rData2.ULong &&
+ rData1.Hyper == rData2.Hyper &&
+ rData1.UHyper == rData2.UHyper &&
+- rData1.Float == rData2.Float &&
+- rData1.Double == rData2.Double &&
++ fabs( rData1.Float - rData2.Float ) < epsilon_f &&
++ fabs( rData1.Double - rData2.Double ) < epsilon_d &&
+ rData1.Enum == rData2.Enum &&
+ rData1.String == rData2.String &&
+ rData1.Byte2 == rData2.Byte2 &&
--- /dev/null
+diff -urN hsqldb.old/patches/use-system-servlet-api.jar.diff hsqldb/patches/use-system-servlet-api.jar.diff
+--- a/external/hsqldb/patches/use-system-servlet-api.jar.diff 1970-01-01 01:00:00.000000000 +0100
++++ b/external/hsqldb/patches/use-system-servlet-api.jar.diff 2013-03-19 15:09:42.137801521 +0100
+@@ -0,0 +1,29 @@
++--- misc/hsqldb/build/build.xml
+++++ misc/build/hsqldb/build/build.xml
++@@ -356,7 +356,7 @@
++ optimize="${build.optimize}"
++ >
++ <classpath>
++- <pathelement location="lib/servlet.jar"/>
+++ <pathelement location="/usr/share/java/servlet-api-3.1.jar"/>
++ </classpath>
++ <include name="*.java"/>
++ <include name="org/hsqldb/*.java"/>
++@@ -818,7 +818,7 @@
++ ${src}/org/hsqldb/util/RCData.java,
++ ${src}/org/hsqldb/util/SqlTool.java"
++ destdir="${basedir}/doc/src"
++- classpath="${basedir}/lib/servlet.jar;${basedir}/lib/junit.jar"
+++ classpath="/usr/share/java/servlet-api-3.1.jar;${basedir}/lib/junit.jar"
++ author="true"
++ version="false"
++ use="true"
++@@ -839,7 +839,7 @@
++ <javadoc packagenames="org.hsqldb.*,org.hsqldb.jdbc.*,org.hsqldb.lib.*,org.hsqldb.util.*"
++ sourcepath="${src}"
++ destdir="${basedir}/doc/src"
++- classpath="${basedir}/lib/servlet.jar;${basedir}/lib/junit.jar"
+++ classpath="/usr/share/java/servlet-api-3.1.jar;${basedir}/lib/junit.jar"
++ author="true"
++ version="false"
++ use="true"
+diff --git a/external/hsqldb/UnpackedTarball_hsqldb.mk b/external/hsqldb/UnpackedTarball_hsqldb.mk
+index 389572377fa6..d43d1418049d 100644
+--- a/external/hsqldb/UnpackedTarball_hsqldb.mk
++++ b/external/hsqldb/UnpackedTarball_hsqldb.mk
+@@ -27,6 +27,7 @@ $(eval $(call gb_UnpackedTarball_add_patches,hsqldb,\
+ external/hsqldb/patches/hsqldb-runFinalizersOnExit.patch \
+ external/hsqldb/patches/jdbc-4.1.patch \
+ external/hsqldb/patches/multipleResultSets.patch \
++ external/hsqldb/patches/use-system-servlet-api.jar.diff \
+ ))
+
+ # vim: set noet sw=4 ts=4:
--- /dev/null
+diff --git a/config_host.mk.in b/config_host.mk.in
+index 9de974e472f9..1352749754e3 100644
+--- a/config_host.mk.in
++++ b/config_host.mk.in
+@@ -645,6 +645,7 @@ export SYSTEM_LIBATOMIC_OPS=@SYSTEM_LIBATOMIC_OPS@
+ export SYSTEM_LIBEOT=@SYSTEM_LIBEOT@
+ export SYSTEM_LIBEXTTEXTCAT=@SYSTEM_LIBEXTTEXTCAT@
+ export SYSTEM_LIBEXTTEXTCAT_DATA=@SYSTEM_LIBEXTTEXTCAT_DATA@
++export SYSTEM_LIBFIXMATH=@SYSTEM_LIBFIXMATH@
+ export SYSTEM_LIBLANGTAG=@SYSTEM_LIBLANGTAG@
+ export SYSTEM_LIBNUMBERTEXT=@SYSTEM_LIBNUMBERTEXT@
+ export SYSTEM_LIBNUMBERTEXT_DATA=@SYSTEM_LIBNUMBERTEXT_DATA@
+diff --git a/vcl/Library_vcl.mk b/vcl/Library_vcl.mk
+index 1d18d2325ad8..b40cb77cb34f 100644
+--- a/vcl/Library_vcl.mk
++++ b/vcl/Library_vcl.mk
+@@ -569,6 +569,12 @@ vcl_headless_freetype_code=\
+ vcl/unx/generic/printer/jobdata \
+ vcl/unx/generic/printer/ppdparser \
+
++ifeq ($(SYSTEM_LIBFIXMATH),TRUE)
++$(eval $(call gb_Library_add_libs,vcl,\
++ -llibfixmath \
++))
++endif
++
+ ifeq ($(USING_X11),TRUE)
+ $(eval $(call gb_Library_add_exception_objects,vcl,\
+ vcl/unx/generic/window/screensaverinhibitor \
--- /dev/null
+diff --git a/RepositoryExternal.mk b/RepositoryExternal.mk
+index 16eb38a..8983376 100644
+--- a/RepositoryExternal.mk
++++ b/RepositoryExternal.mk
+@@ -2392,7 +2392,7 @@ ifneq ($(ENABLE_LPSOLVE),)
+ ifneq ($(SYSTEM_LPSOLVE),)
+
+ define gb_LinkTarget__use_lpsolve
+-$(call gb_LinkTarget_add_libs,$(1),-llpsolve55)
++$(call gb_LinkTarget_add_ldflags,$(1),-llpsolve55_pic)
+ $(call gb_LinkTarget_add_defs,$(1),\
+ -DSYSTEM_LPSOLVE \
+ )
+diff --git a/configure.ac b/configure.ac
+index df7cb4c..9eb5bad 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -9790,10 +9812,11 @@ if test "$ENABLE_LPSOLVE" = TRUE; then
+ # some systems need this. Like Ubuntu....
+ AC_CHECK_LIB(m, floor)
+ AC_CHECK_LIB(dl, dlopen)
+- AC_CHECK_LIB([lpsolve55], [make_lp], [:],
++ AC_CHECK_LIB(colamd, colamd)
++ AC_CHECK_LIB([lpsolve55_pic], [make_lp], [:],
+ [ AC_MSG_ERROR(lpsolve library not found or too old.)], [])
+ LIBS=$save_LIBS
+- libo_MINGW_CHECK_DLL([lpsolve55])
++ libo_MINGW_CHECK_DLL([lpsolve55_pic])
+ else
+ AC_MSG_RESULT([internal])
+ SYSTEM_LPSOLVE=
--- /dev/null
+diff --git a/include/sfx2/strings.hrc b/include/sfx2/strings.hrc
+index 1b0ea6ccb2ff..630f4330552a 100644
+--- a/include/sfx2/strings.hrc
++++ b/include/sfx2/strings.hrc
+@@ -132,7 +132,7 @@
+ #define STR_GID_CONTROLS NC_("STR_GID_CONTROLS", "Controls")
+ #define STR_QUITAPP NC_("STR_QUITAPP", "E~xit %PRODUCTNAME")
+ #define RID_STR_HELP NC_("RID_STR_HELP", "Help")
+-#define RID_STR_HLPFILENOTEXIST NC_("RID_STR_HLPFILENOTEXIST", "The help file for this topic is not installed.")
++#define RID_STR_HLPFILENOTEXIST NC_("RID_STR_HLPFILENOTEXIST", "The help file for this topic is not installed. Please install the libreoffice-help-en-us package or the locale specific help package libreoffice-help-<language-code>.")
+ #define STR_QUICKSTART_EXIT NC_("STR_QUICKSTART_EXIT", "Exit Quickstarter")
+ #define STR_QUICKSTART_TIP NC_("STR_QUICKSTART_TIP", "%PRODUCTNAME %PRODUCTVERSION Quickstarter")
+ #define STR_QUICKSTART_FILEOPEN NC_("STR_QUICKSTART_FILEOPEN", "Open Document...")
--- /dev/null
+Description: Hide startcenter and math from the shell
+Author: Olivier Tilloy <olivier.tilloy@canonical.com>
+Bug-Ubuntu: https://launchpad.net/bugs/1696250
+Forwarded: not-needed
+
+--- a/sysui/desktop/menus/math.desktop
++++ b/sysui/desktop/menus/math.desktop
+@@ -33,6 +33,7 @@ Keywords=Equation;OpenDocument Formula;F
+ InitialPreference=5
+ StartupWMClass=libreoffice-math
+ X-KDE-Protocols=file,http,ftp,webdav,webdavs
++NotShowIn=GNOME;
+
+ Actions=NewDocument;
+ [Desktop Action NewDocument]
--- /dev/null
+diff --git a/configure.ac b/configure.ac
+index 42dc3b4..f5a51c9 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -6671,7 +6671,7 @@ if test "$ENABLE_JAVA" != ""; then
+ JAVAINTERPRETER=`win_short_path_for_make "$JAVAINTERPRETER"`
+ elif test "$cross_compiling" != "yes"; then
+ case $CPUNAME in
+- AARCH64|AXP|X86_64|HPPA|IA64|POWERPC64|S390X|SPARC64|GODSON64)
++ AARCH64|AXP|X86_64|IA64|POWERPC64|S390X|SPARC64|GODSON64)
+ if test -f "$JAVAINTERPRETER" -a "`$JAVAINTERPRETER -version 2>&1 | $GREP -i 64-bit`" = "" >/dev/null; then
+ AC_MSG_WARN([You are building 64-bit binaries but the JDK $JAVAINTERPRETER is 32-bit])
+ AC_MSG_ERROR([You should pass the --with-jdk-home option pointing to a 64-bit JDK])
--- /dev/null
+From b1a2f727ca99ecd3402d4b051b99cbfd24266e59 Mon Sep 17 00:00:00 2001
+From: Eike Rathke <erack@redhat.com>
+Date: Fri, 22 Jul 2022 22:17:11 +0200
+Subject: Related: tdf#150011 Add HRK Croatian Kuna to Euro conversion wizard
+
+Maybe just for completeness, it's removed from menu but might be
+callable as macro.
+
+Change-Id: Iade0be845186d3deb2f00f4aaa230c0b344cea72
+Reviewed-on: https://gerrit.libreoffice.org/c/core/+/137372
+Reviewed-by: Eike Rathke <erack@redhat.com>
+Tested-by: Jenkins
+---
+ wizards/source/euro/Init.xba | 16 ++++++++++++++++
+ wizards/source/resources/resources_en_US.properties | 1 +
+ 2 files changed, 17 insertions(+)
+
+diff --git a/wizards/source/euro/Init.xba b/wizards/source/euro/Init.xba
+index 623a0a53be46..9f56c503a347 100644
+--- a/wizards/source/euro/Init.xba
++++ b/wizards/source/euro/Init.xba
+@@ -89,6 +89,7 @@ Public sCurrSLOVAK as String
+ Public sCurrESTONIAN as String
+ Public sCurrLATVIAN as String
+ Public sCurrLITHUANIAN as String
++Public sCurrCROATIAN as String
+
+ Public sPrgsRETRIEVAL as String
+ Public sPrgsCONVERTING as String
+@@ -214,6 +215,7 @@ Dim LocWorkPath as String
+ sCurrESTONIAN = GetResText("CURRENCIES_16")
+ sCurrLATVIAN = GetResText("CURRENCIES_17")
+ sCurrLITHUANIAN = GetResText("CURRENCIES_18")
++ sCurrCROATIAN = GetResText("CURRENCIES_19")
+ .cmdCancel.Label = sCANCEL
+ .cmdHelp.Label = sHELP
+ .cmdBack.Label = GetResText("STEP_ZERO_2")
+@@ -393,6 +395,11 @@ Sub InitializeLanguages()
+ LangIDValue(18,0,1) = "LT"
+ LangIDValue(18,0,2) = "-427"
+
++' CURRENCIES_CROATIAN
++ LangIDValue(19,0,0) = "hr"
++ LangIDValue(19,0,1) = "HR"
++ LangIDValue(19,0,2) = "-41A"
++
+ End Sub
+
+
+@@ -572,6 +579,15 @@ Dim i as Integer
+ CurrValue(18,4) = "Lt"
+ CurrValue(18,5) = "LTL"
+
++ CurrValue(19,0) = sCurrCROATIAN
++ ' real conversion rate
++ CurrValue(19,1) = 7.53450
++ ' rounded conversion rate
++ CurrValue(19,2) = 7.5
++ CurrValue(19,3) = "kn"
++ CurrValue(19,4) = "kn"
++ CurrValue(19,5) = "HRK"
++
+ i = -1
+ CurrSymbolList(0) = ""
+ CurrSymbolList(1) = ""
+diff --git a/wizards/source/resources/resources_en_US.properties b/wizards/source/resources/resources_en_US.properties
+index 32f9104e97e0..8649b2500e6a 100644
+--- a/wizards/source/resources/resources_en_US.properties
++++ b/wizards/source/resources/resources_en_US.properties
+@@ -448,6 +448,7 @@ CURRENCIES_15=Slovak Koruna
+ CURRENCIES_16=Estonian Kroon
+ CURRENCIES_17=Latvian Lats
+ CURRENCIES_18=Lithuanian Litas
++CURRENCIES_19=Croatian Kuna
+ STEP_LASTPAGE_0=Progress
+ STEP_LASTPAGE_1=Retrieving the relevant documents...
+ STEP_LASTPAGE_2=Converting the documents...
+--
+cgit v1.2.1
+
--- /dev/null
+diff --git a/bin/distro-install-file-lists b/bin/distro-install-file-lists
+index eaabf9c..c1b1ec6 100755
+--- libreoffice-3.5.0/bin/distro-install-file-lists
++++ libreoffice-3.5.0/bin/distro-install-file-lists
+@@ -8,6 +8,8 @@
+ exit 1
+ fi
+
++export OOO_VENDOR=Debian
++
+ BUILDDIR=`pwd`
+ FILELISTSDIR="$BUILDDIR/file-lists"
+
+@@ -351,152 +351,6 @@ if test "z$OOO_VENDOR" != "zDebian" ; then
+ remove_duplicity_from_flists common_list.txt lang_bg_list.txt $INSTALLDIR/presets/config/styles.sod
+ # the British fixes can be removed after the issue #54113 is fixed
+ remove_duplicity_from_flists common_list.txt lang_en-GB_list.txt $INSTALLDIR/presets/config/standard.sog
+-
+-else
+-
+- echo "Creating package directories..."
+-
+- test -d pkg && rm -r pkg || :
+-
+- # Create package tree (needed by Debian's dpkg)
+- # create_package_directory <list_file> <directory_name>
+- create_package_directory()
+- {
+- listfile=$1
+- directory="$2"
+- perl -nl \
+- -e " if(/^%dir (.*)/)
+- {system('mkdir', '-p', '-m', '755', \"$directory\".\$1);}
+- else
+- {rename('./'.\$_, \"$directory\".\$_);}
+- " \
+- $listfile
+- }
+-
+- create_package_directory gid_Module_Root_Ure_Hidden pkg/ure
+-
+- create_package_directory gid_Module_Root pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Brand pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Files_Images pkg/libreoffice-common
+- create_package_directory gid_Module_Oo_Linguistic pkg/libreoffice-common
+- create_package_directory gid_Module_Optional_Xsltfiltersamples pkg/libreoffice-common
+- create_package_directory gid_Module_Optional_Grfflt pkg/libreoffice-draw
+- create_package_directory gid_Module_Prg_Calc_Bin pkg/libreoffice-calc
+- create_package_directory gid_Module_Prg_Math_Bin pkg/libreoffice-math
+- create_package_directory gid_Module_Prg_Draw_Bin pkg/libreoffice-draw
+- create_package_directory gid_Module_Prg_Wrt_Bin pkg/libreoffice-writer
+- create_package_directory gid_Module_Prg_Impress_Bin pkg/libreoffice-impress
+- create_package_directory gid_Module_Prg_Base_Bin pkg/libreoffice-base
+- create_package_directory gid_Module_Brand_Prg_Calc pkg/libreoffice-calc
+- create_package_directory gid_Module_Brand_Prg_Math pkg/libreoffice-math
+- create_package_directory gid_Module_Brand_Prg_Draw pkg/libreoffice-draw
+- create_package_directory gid_Module_Brand_Prg_Wrt pkg/libreoffice-writer
+- create_package_directory gid_Module_Brand_Prg_Impress pkg/libreoffice-impress
+- create_package_directory gid_Module_Brand_Prg_Base pkg/libreoffice-base
+- create_package_directory gid_Module_Pyuno pkg/python-uno
+- create_package_directory gid_Module_Optional_Gnome pkg/libreoffice-gnome
+-
+- create_package_directory gid_Module_Root_Files_2 pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Files_3 pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Files_4 pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Files_5 pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Files_6 pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Files_7 pkg/libreoffice-common
+- if [ -e gid_Module_Optional_Pymailmerge ]; then
+- create_package_directory gid_Module_Optional_Pymailmerge pkg/libreoffice-emailmerge
+- else # post m26
+- mkdir -p pkg/libreoffice-emailmerge/$INSTALLDIR/program
+- mv pkg/libreoffice-common/$INSTALLDIR/program/mailmerge.py \
+- pkg/libreoffice-emailmerge/$INSTALLDIR/program/mailmerge.py
+- fi
+- create_package_directory gid_Module_Optional_OGLTrans pkg/libreoffice-ogltrans
+-
+- create_package_directory gid_Module_Root_SDK pkg/libreoffice-dev
+-
+- for l in `echo $WITH_LANG_LIST`; do
+- for p in Impress Draw Math Calc Base Writer; do
+- create_package_directory gid_Module_Langpack_${p}_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+- done
+- create_package_directory gid_Module_Langpack_Basis_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+- create_package_directory gid_Module_Langpack_Brand_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+- create_package_directory gid_Module_Langpack_Resource_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+- create_package_directory gid_Module_Helppack_Help_`echo $l | sed -e s/-/_/g` pkg/libreoffice-help-$l
+-
+- # some help files are in _Langpack_{Writer,Impress,...}_<lang>
+- # move them from -l10n to -help
+- if [ "$l" = "en-US" ]; then d=en; else d=$l; fi
+- mv pkg/libreoffice-l10n-$l/$INSTALLDIR/help/$d/* \
+- pkg/libreoffice-help-$l/$INSTALLDIR/help/$d && \
+- rmdir pkg/libreoffice-l10n-$l/$INSTALLDIR/help/$d
+- done
+-
+- # move_wrappers <directory_name> <name> [...]
+- move_wrappers()
+- {
+- directory=$1
+- shift
+- mkdir -m755 -p "$directory"/usr/bin
+- while test -n "$1"; do
+- mv usr/*bin/"$1$BINSUFFIX" "$directory"/usr/bin
+- shift
+- done
+- }
+- move_wrappers pkg/libreoffice-common soffice unopkg
+- if test "$COMPAT_OOWRAPPERS" = "YES" ; then
+- move_wrappers pkg/libreoffice-common ooffice oofromtemplate
+- move_wrappers pkg/libreoffice-base oobase
+- move_wrappers pkg/libreoffice-writer oowriter ooweb
+- move_wrappers pkg/libreoffice-calc oocalc
+- move_wrappers pkg/libreoffice-impress ooimpress
+- move_wrappers pkg/libreoffice-math oomath
+- move_wrappers pkg/libreoffice-draw oodraw
+- fi
+- move_wrappers pkg/libreoffice-common libreoffice lofromtemplate
+- move_wrappers pkg/libreoffice-base lobase
+- move_wrappers pkg/libreoffice-writer lowriter loweb
+- move_wrappers pkg/libreoffice-calc localc
+- move_wrappers pkg/libreoffice-impress loimpress
+- move_wrappers pkg/libreoffice-math lomath
+- move_wrappers pkg/libreoffice-draw lodraw
+-
+- # Move all libraries, binaries, *.rdb from -common to -core
+- for d in $INSTALLDIR/program $INSTALLDIR/program; do \
+- if [ ! -d $DESTDIR/pkg/libreoffice-core/$d ]; then \
+- mkdir -p $DESTDIR/pkg/libreoffice-core/$d; \
+- fi &&
+- ( cd pkg/libreoffice-common/$d
+- find -maxdepth 1 \
+- -regex '\./\(.*\.so.*\|.*\.bin\|pagein\|msfontextract\|.*\.rdb\|javaldx\|uri-encode\)' \
+- -exec mv {} $DESTDIR/pkg/libreoffice-core/$d \;
+- ); \
+- done
+-
+- # install additional ooo-build scripts & misc stuff
+- mkdir -p pkg/libreoffice-common/usr/share/man/man1
+- if test "$COMPAT_OOWRAPPERS" = "YES" ; then
+- mv usr/share/man/man1/openoffice$BINSUFFIX.1 \
+- pkg/libreoffice-common/usr/share/man/man1
+- fi
+- mv usr/share/man/man1/libreoffice$BINSUFFIX.1 \
+- pkg/libreoffice-common/usr/share/man/man1
+- mkdir -p pkg/libreoffice-common/etc/bash_completion.d
+- if test "$COMPAT_OOWRAPPERS" = "YES" ; then
+- mv etc/bash_completion.d/ooffice$BINSUFFIX.sh \
+- pkg/libreoffice-common/etc/bash_completion.d
+- fi
+- mv etc/bash_completion.d/libreoffice$BINSUFFIX.sh \
+- pkg/libreoffice-common/etc/bash_completion.d
+- mv .$INSTALLDIR/program/java-set-classpath \
+- pkg/libreoffice-common/$INSTALLDIR/program
+- if echo $WITH_LANG_LIST | grep -q en-US; then
+- for i in forms/resume.ott officorr/project-proposal.ott; do \
+- mkdir -p pkg/libreoffice-common/$INSTALLDIR/share/template/en-US/`dirname $i`; \
+- mv .$INSTALLDIR/share/template/en-US/$i \
+- pkg/libreoffice-common/$INSTALLDIR/share/template/en-US/$i; \
+- done; \
+- fi
+- # Warn for any remaining files
+- find . -path './pkg' -prune -o -not -name 'gid_Module_*' -not -type d -exec echo "File not packaged: {}" \;
+ fi
+
+ # mark the config files
--- /dev/null
+Gemeinsame Unterverzeichnisse: odk-old/config und odk/config.
+Gemeinsame Unterverzeichnisse: odk-old/docs und odk/docs.
+Gemeinsame Unterverzeichnisse: odk-old/examples und odk/examples.
+diff --git a/odk/Module_odk.mk b/odk/Module_odk.mk
+index 693885322115..5fcb39306a0b 100644
+--- a/odk/Module_odk.mk
++++ b/odk/Module_odk.mk
+@@ -42,8 +42,10 @@ endif
+ ifneq ($(ENABLE_JAVA),)
+ $(eval $(call gb_Module_add_targets,odk,\
+ CustomTarget_classes \
+- CustomTarget_javadoc \
+- GeneratedPackage_odk_javadoc \
++ $(if $(JAVADOC),\
++ CustomTarget_javadoc \
++ GeneratedPackage_odk_javadoc \
++ ) \
+ GeneratedPackage_uno_loader_classes \
+ ))
+ endif
+
+Gemeinsame Unterverzeichnisse: odk-old/pack und odk/pack.
+Gemeinsame Unterverzeichnisse: odk-old/qa und odk/qa.
+Gemeinsame Unterverzeichnisse: odk-old/settings und odk/settings.
+Gemeinsame Unterverzeichnisse: odk-old/source und odk/source.
+Gemeinsame Unterverzeichnisse: odk-old/util und odk/util.
+--- a/configure.ac-old 2013-05-27 18:32:42.187305241 +0200
++++ b/configure.ac 2013-05-27 18:44:29.131286710 +0200
+@@ -2057,6 +2057,18 @@ AC_ARG_WITH(doxygen,
+ documentation. Not relevant in the --disable-odk case.]),
+ ,with_doxygen=yes)
+
++AC_ARG_WITH(
++ [javadoc],
++ AS_HELP_STRING(
++ [--with-javadoc],
++ [Specifies the javadoc executable to use when generating ODK Java
++ documentation. --without-javadoc disables generation of ODK Java
++ documentation. Not relevant in the --disable-odk case.])
++ [
++ Usage: --with-javadoc=<absolute path to doxygen executable>
++ ],,
++ [with_javadoc=yes])
++
+ AC_ARG_WITH(visual-studio,
+ AS_HELP_STRING([--with-visual-studio=<2019/2022>],
+ [Specify which Visual Studio version to use in case several are
+@@ -7872,34 +7872,43 @@ fi
+ dnl ===================================================================
+ dnl Checks for javadoc
+ dnl ===================================================================
+-if test "$ENABLE_JAVA" != "" -a "$cross_compiling" != "yes"; then
++if test "$ENABLE_JAVA" != "" -a "$enable_odk" != no -a "$cross_compiling" != "yes"; then
+ if test -z "$with_jdk_home"; then
+ AC_PATH_PROG(JAVADOC, javadoc)
+ else
+- _javadoc_path="$with_jdk_home/bin/javadoc"
+- dnl Check if there is a javadoc at all.
+- if test -x "$_javadoc_path"; then
+- JAVADOC=$_javadoc_path
+- else
+- AC_PATH_PROG(JAVADOC, javadoc)
+- fi
+- fi
+- if test -z "$JAVADOC"; then
+- AC_MSG_ERROR([$_javadoc_path not found set with_jdk_home])
+- fi
+- if test "$build_os" = "cygwin"; then
+- if test x`echo "$JAVADOC" | $GREP -i '\.exe$'` = x; then
+- JAVADOC="${JAVADOC}.exe"
+- fi
+- JAVADOC=`win_short_path_for_make "$JAVADOC"`
+- fi
++ if test "$with_javadoc" = "yes"; then
++ _javadoc_path="$with_jdk_home/bin/javadoc"
++ dnl Check if there is a javadoc at all.
++ if test -x "$_javadoc_path"; then
++ JAVADOC=$_javadoc_path
++ else
++ AC_PATH_PROG(JAVADOC, javadoc)
++ fi
++ if test -z "$JAVADOC"; then
++ AC_MSG_ERROR([$_javadoc_path not found set with_jdk_home])
++ fi
++ if test "$build_os" = "cygwin"; then
++ if test x`echo "$JAVADOC" | $GREP -i '\.exe$'` = x; then
++ JAVADOC="${JAVADOC}.exe"
++ fi
++ JAVADOC=`win_short_path_for_make "$JAVADOC"`
++ fi
+
+- if test `$JAVADOC --version 2>&1 | $GREP -c "gjdoc"` -gt 0; then
+- JAVADOCISGJDOC="yes"
++ if test `$JAVADOC --version 2>&1 | $GREP -c "gjdoc"` -gt 0; then
++ JAVADOCISGJDOC="yes"
++ fi
++ else
++ unset JAVADOC
++ fi
+ fi
++else
++ unset JAVADOC
+ fi
+-AC_SUBST(JAVADOC)
+ AC_SUBST(JAVADOCISGJDOC)
++if test "$JAVADOCISGJDOC" = "yes"; then
++ unset JAVADOC
++fi
++AC_SUBST(JAVADOC)
+
+ if test "$ENABLE_JAVA" != "" -a \( "$cross_compiling" != "yes" -o -n "$with_jdk_home" \); then
+ # check if JAVA_HOME was (maybe incorrectly?) set automatically to /usr
+diff --git a/odk/CustomTarget_check.mk b/odk/CustomTarget_check.mk
+index 74331955be9b..3415b0193cf9 100644
+--- a/odk/CustomTarget_check.mk
++++ b/odk/CustomTarget_check.mk
+@@ -36,7 +36,7 @@ $(call gb_CustomTarget_get_workdir,odk/check)/checkbin : \
+ $(if $(filter WNT,$(OS)),$(call gb_Package_get_target,odk_config_win)) \
+ $(call gb_Package_get_target,odk_docs) \
+ $(call gb_Package_get_target,odk_html) \
+- $(if $(ENABLE_JAVA),$(call gb_GeneratedPackage_get_target,odk_javadoc)) \
++ $(if $(JAVADOC),$(call gb_GeneratedPackage_get_target,odk_javadoc)) \
+ $(call gb_Package_get_target,odk_settings) \
+ $(call gb_Package_get_target,odk_settings_generated)
+ ifneq ($(gb_SUPPRESS_TESTS),)
+diff --git a/odk/util/check.pl b/odk/util/check.pl
+index 899b42c..2c7a780 100644
+--- a/odk/util/check.pl
++++ b/odk/util/check.pl
+@@ -188,7 +188,7 @@ if (-d "$SdkDir") {
+ # improvement required
+ my $solar_java = $ENV{"ENABLE_JAVA"};
+ my $JDK = $ENV{"JDK"};
+- if (defined($solar_java) && $solar_java ne "" && (!defined($JDK) || $JDK ne "gcj")) {
++ if (defined($solar_java) && $solar_java ne "" && $ENV{"JAVADOC"} ne "") {
+ print "check java docu: ";
+ if (check_dir("docs/java/ref")) {
+ if (!check_file("docs/java/ref/index.html")) {
+diff --git a/Repository.mk b/Repository.mk
+index 5f2654b..471210f 100644
+--- a/Repository.mk
++++ b/Repository.mk
+@@ -834,7 +841,7 @@ $(eval $(call gb_Helper_register_packages_for_install,sdk,\
+ offapi_idl \
+ udkapi_idl \
+ $(if $(ENABLE_JAVA), \
+- odk_javadoc \
++ $(if $(JAVADOC),odk_javadoc) \
+ odk_uno_loader_classes \
+ ) \
+ ))
--- /dev/null
+diff --git a/officecfg/registry/data/org/openoffice/Office/DataAccess.xcu b/officecfg/registry/data/org/openoffice/Office/DataAccess.xcu
+index 9be30a2..59c87cb 100644
+--- a/officecfg/registry/data/org/openoffice/Office/DataAccess.xcu
++++ b/officecfg/registry/data/org/openoffice/Office/DataAccess.xcu
+@@ -147,6 +147,30 @@
+ </node>
+ </node>
+ </node>
++ <node oor:name="JDBC">
++ <node oor:name="DriverClassPaths">
++ <node oor:name="org.mariadb.jdbc.Driver" oor:op="replace">
++ <prop oor:name="Path">
++ <value>file:///usr/share/java/mariadb-java-client.jar</value>
++ </prop>
++ </node>
++ <node oor:name="com.mysql.jdbc.Driver" oor:op="replace">
++ <prop oor:name="Path">
++ <value>file:///usr/share/java/mysql.jar</value>
++ </prop>
++ </node>
++ <node oor:name="org.postgresql.Driver" oor:op="replace">
++ <prop oor:name="Path">
++ <value>file:///usr/share/java/posgresql.jar</value>
++ </prop>
++ </node>
++ <node oor:name="net.sourceforge.jtds.jdbc.Driver" oor:op="replace">
++ <prop oor:name="Path">
++ <value>file:///usr/share/java/jtds.jar</value>
++ </prop>
++ </node>
++ </node>
++ </node>
+ <node oor:name="RegisteredNames">
+ <node oor:name="EvolutionLocal" oor:op="replace" install:module="evoab2">
+ <prop oor:name="Location" oor:type="xs:string">
--- /dev/null
+commit b71107fb12e3c3125e0cb62c5a4f6636a80c6408
+Author: Bjoern Michaelsen <bjoern.michaelsen@canonical.com>
+AuthorDate: Tue Jun 7 11:52:37 2011 +0200
+Commit: Bjoern Michaelsen <bjoern.michaelsen@canonical.com>
+CommitDate: Tue Jun 7 11:52:37 2011 +0200
+
+ on debian-based systems, we know where our soffice binary is
+
+diff --git a/jurt/com/sun/star/lib/util/NativeLibraryLoader.java b/jurt/com/sun/star/lib/util/NativeLibraryLoader.jav
+index da22980..36664ca 100644
+--- libreoffice-3.5.0/ridljar/com/sun/star/lib/util/NativeLibraryLoader.java
++++ libreoffice-3.5.0/ridljar/com/sun/star/lib/util/NativeLibraryLoader.java
+@@ -111,6 +111,8 @@ public final class NativeLibraryLoader {
+ }
+ }
+ }
++ if (name.equals("soffice"))
++ return new File("/usr/lib/libreoffice/program/soffice");
+ return null;
+ }
--- /dev/null
+diff --git a/scp2/InstallModule_draw.mk b/scp2/InstallModule_draw.mk
+index a7c02be..d48edf2 100644
+--- a/scp2/InstallModule_draw.mk
++++ b/scp2/InstallModule_draw.mk
+@@ -10,6 +10,7 @@
+ $(eval $(call gb_InstallModule_InstallModule,scp2/draw))
+
+ $(eval $(call gb_InstallModule_use_auto_install_libs,scp2/draw,\
++ draw \
+ draw_brand \
+ ))
+
+diff --git a/scp2/source/draw/module_draw.scp b/scp2/source/draw/module_draw.scp
+index 8737579..0913c61 100644
+--- a/scp2/source/draw/module_draw.scp
++++ b/scp2/source/draw/module_draw.scp
+@@ -18,6 +18,7 @@
+
+ #include "macros.inc"
+
++#include "AutoInstall/draw"
+ #include "AutoInstall/draw_brand"
+
+ Module gid_Module_Prg_Draw
+@@ -34,7 +35,8 @@ Module gid_Module_Prg_Draw_Bin
+ Sortkey = "100";
+ Default = YES;
+ Styles = (HIDDEN_ROOT);
+- Files = (gid_File_Extra_Urldesktop_Draw,gid_File_Extra_Urlnew_Draw,gid_File_Extra_Urlstart_Draw,gid_File_Extra_Urltasks_Draw,
++ Files = (auto_draw_ALL,
++ gid_File_Extra_Urldesktop_Draw,gid_File_Extra_Urlnew_Draw,gid_File_Extra_Urlstart_Draw,gid_File_Extra_Urltasks_Draw,
+ gid_File_Share_Registry_Draw_Xcd,
+ gid_File_Tmp_Userinstall_Draw_Inf);
+ End
+diff --git a/scp2/AutoInstall.mk b/scp2/AutoInstall.mk
+index 7d2a347..a15ac52 100644
+--- a/scp2/AutoInstall.mk
++++ b/scp2/AutoInstall.mk
+@@ -17,6 +17,7 @@ $(eval $(call gb_AutoInstall_add_module,base_brand,,LIBO_EXECUTABLE,,PACKAGE_FIL
+ $(eval $(call gb_AutoInstall_add_module,brand,,LIBO_EXECUTABLE,,PACKAGE_FILELIST))
+ $(eval $(call gb_AutoInstall_add_module,calc,LIBO_LIB_FILE,,,PACKAGE_FILELIST))
+ $(eval $(call gb_AutoInstall_add_module,calc_brand,,LIBO_EXECUTABLE,,PACKAGE_FILELIST))
++$(eval $(call gb_AutoInstall_add_module,draw,LIBO_LIB_FILE))
+ $(eval $(call gb_AutoInstall_add_module,draw_brand,,LIBO_EXECUTABLE,,PACKAGE_FILELIST))
+ $(eval $(call gb_AutoInstall_add_module,extensions_bsh,,,LIBO_JAR_FILE))
+ $(eval $(call gb_AutoInstall_add_module,extensions_numbertext,,,,PACKAGE_FILELIST))
+diff --git a/Repository.mk b/Repository.mk
+index f386b8aa7c05..7c337f23891b 100644
+--- a/Repository.mk
++++ b/Repository.mk
+@@ -244,13 +244,29 @@ $(eval $(call gb_Helper_register_executables_for_install,UREBIN,ure,\
+
+ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,base, \
+ abp \
++ calc \
++ dba \
++ dbahsql \
++ $(call gb_Helper_optional,DBCONNECTIVITY, \
++ dbase \
++ dbaxml) \
+ dbp \
+ dbu \
++ $(call gb_Helper_optional,DBCONNECTIVITY,flat) \
++ $(if $(ENABLE_JAVA),jdbc) \
++ $(call gb_Helper_optional,DBCONNECTIVITY,mysql_jdbc) \
++ $(call gb_Helper_optional,MARIADBC,$(call gb_Helper_optional,DBCONNECTIVITY,mysqlc)) \
++ odbc \
++))
++
++$(eval $(call gb_Helper_register_libraries_for_install,PLAINLIBS_OOO,base, \
++ $(call gb_Helper_optional,DBCONNECTIVITY,dbpool2) \
++ $(if $(ENABLE_JAVA),hsqldb) \
++ sdbc2 \
+ ))
+
+ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,calc, \
+ analysis \
+- $(call gb_Helper_optional,DBCONNECTIVITY,calc) \
+ date \
+ pricing \
+ sc \
+@@ -265,6 +281,13 @@ $(eval $(call gb_Helper_register_plugins_for_install,OOOLIBS,calc, \
+ scui \
+ ))
+
++$(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,draw, \
++ animcore \
++ sd \
++ sdd \
++ sdfilt \
++))
++
+ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,graphicfilter, \
+ svgfilter \
+ wpftdraw \
+@@ -272,10 +295,10 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,graphicfilter, \
+ ))
+
+ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,impress, \
+- animcore \
+ PresenterScreen \
+ PresentationMinimizer \
+ wpftimpress \
++ slideshow \
+ ))
+
+ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,onlineupdate, \
+@@ -355,11 +378,6 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,ooo, \
+ $(if $(filter $(OS),WNT),,cmdmail) \
+ configmgr \
+ ctl \
+- dba \
+- dbahsql \
+- $(call gb_Helper_optional,DBCONNECTIVITY, \
+- dbase \
+- dbaxml) \
+ dbtools \
+ deploymentmisc \
+ $(if $(filter-out MACOSX WNT,$(OS)),desktopbe1) \
+@@ -373,7 +391,6 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,ooo, \
+ evtatt \
+ expwrap \
+ $(call gb_Helper_optional,DBCONNECTIVITY, \
+- flat \
+ file) \
+ filterconfig \
+ fps_office \
+@@ -412,7 +412,6 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,ooo, \
+ $(call gb_Helper_optionals_or,HELPTOOLS XMLHELP,helplinker) \
+ i18npool \
+ i18nsearch \
+- $(if $(ENABLE_JAVA),jdbc) \
+ $(if $(filter WNT,$(OS)),jumplist) \
+ $(if $(ENABLE_LDAP),ldapbe2) \
+ $(if $(filter WNT,$(OS)),WinUserInfoBe) \
+@@ -403,10 +419,7 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,ooo, \
+ msfilter \
+ $(call gb_Helper_optional,SCRIPTING,msforms) \
+ mtfrenderer \
+- $(call gb_Helper_optional,DBCONNECTIVITY,mysql_jdbc) \
+- $(call gb_Helper_optional,MARIADBC,$(call gb_Helper_optional,DBCONNECTIVITY,mysqlc)) \
+ numbertext \
+- odbc \
+ odfflatxml \
+ offacc \
+ oox \
+@@ -442,11 +441,7 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,ooo, \
+ sb \
+ $(call gb_Helper_optional,DBCONNECTIVITY,sdbt) \
+ scn \
+- sd \
+- sdd \
+- sdfilt \
+ sfx \
+- slideshow \
+ sot \
+ $(if $(or $(DISABLE_GUI),$(ENABLE_WASM_STRIP_SPLASH)),,spl) \
+ storagefd \
+@@ -436,7 +445,6 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,ooo, \
+ svt \
+ svx \
+ svxcore \
+- sw \
+ syssh \
+ textconversiondlgs \
+ textfd \
+@@ -506,12 +501,15 @@ $(eval $(call gb_Helper_register_plugins_for_install,OOOLIBS,ooo, \
+ cui \
+ $(if $(USING_X11),desktop_detector) \
+ icg \
+- sdui \
+ $(if $(ENABLE_GEN),vclplug_gen) \
+ $(if $(filter $(OS),WNT),vclplug_win) \
+ $(if $(filter $(OS),MACOSX),vclplug_osx) \
+ ))
+
++$(eval $(call gb_Helper_register_plugins_for_install,OOOLIBS,draw, \
++ sdui \
++))
++
+ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,postgresqlsdbc, \
+ $(if $(BUILD_POSTGRESQL_SDBC), \
+ postgresql-sdbc \
+@@ -529,6 +540,7 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,writer, \
+ hwp \
+ $(if $(ENABLE_LWP),lwpft) \
+ msword \
++ sw \
+ swd \
+ t602filter \
+ $(call gb_Helper_optional,SCRIPTING,vbaswobj) \
+@@ -622,12 +634,10 @@ $(eval $(call gb_Helper_register_libraries_for_install,PLAINLIBS_OOO,ooo, \
+ ) \
+ cached1 \
+ comphelper \
+- $(call gb_Helper_optional,DBCONNECTIVITY,dbpool2) \
+ $(call gb_Helper_optional,BREAKPAD,crashreport) \
+ deployment \
+ deploymentgui \
+ embobj \
+- $(if $(ENABLE_JAVA),hsqldb) \
+ i18nutil \
+ $(if $(and $(ENABLE_GTK3), $(filter LINUX %BSD SOLARIS,$(OS))), libreofficekitgtk) \
+ $(if $(ENABLE_JAVA), \
+@@ -636,7 +646,6 @@ $(eval $(call gb_Helper_register_libraries_for_install,PLAINLIBS_OOO,ooo, \
+ emboleobj \
+ package2 \
+ $(call gb_Helper_optional,SCRIPTING,scriptframe) \
+- sdbc2 \
+ sofficeapp \
+ srtrs1 \
+ ucb1 \
--- /dev/null
+diff --git a/swext/mediawiki/src/registry/data/org/openoffice/Office/OptionsDialog.xcu b/swext/mediawiki/src/registry/data/org/openoffice/Office/OptionsDialog.xcu
+index 2b35ced08f31..0c96070dd4f0 100644
+--- a/swext/mediawiki/src/registry/data/org/openoffice/Office/OptionsDialog.xcu
++++ b/swext/mediawiki/src/registry/data/org/openoffice/Office/OptionsDialog.xcu
+@@ -18,9 +18,9 @@
+ -->
+ <oor:component-data oor:name="OptionsDialog" oor:package="org.openoffice.Office" xmlns:oor="http://openoffice.org/2001/registry">
+ <node oor:name="Nodes">
+- <node oor:name="Internet" oor:op="fuse">
++ <node oor:name="Internet" oor:op="replace">
+ <node oor:name="Leaves">
+- <node oor:name="com.sun.star.wiki.options" oor:op="fuse">
++ <node oor:name="com.sun.star.wiki.options" oor:op="replace">
+ <prop oor:name="Id">
+ <value>com.sun.wiki-publisher</value>
+ </prop>
+diff --git a/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Filter.xcu b/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Filter.xcu
+index 3309b503824c..261e470b253b 100644
+--- a/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Filter.xcu
++++ b/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Filter.xcu
+@@ -19,7 +19,7 @@
+ <!DOCTYPE oor:component-data SYSTEM "../../../../../../../../officecfg/registry/component-update.dtd">
+ <oor:component-data xmlns:oor="http://openoffice.org/2001/registry" xmlns:xs="http://www.w3.org/2001/XMLSchema" oor:package="org.openoffice.TypeDetection" oor:name="Filter">
+ <node oor:name="Filters">
+- <node oor:name="MediaWiki" oor:op="fuse">
++ <node oor:name="MediaWiki" oor:op="replace">
+ <prop oor:name="FileFormatVersion"><value>0</value></prop>
+ <prop oor:name="Type"><value>MediaWiki</value></prop>
+ <prop oor:name="DocumentService"><value>com.sun.star.text.TextDocument</value></prop>
+@@ -31,7 +31,7 @@
+ </prop>
+ <prop oor:name="Flags"><value>EXPORT ALIEN 3RDPARTYFILTER</value></prop>
+ </node>
+- <node oor:name="MediaWiki_Web" oor:op="fuse">
++ <node oor:name="MediaWiki_Web" oor:op="replace">
+ <prop oor:name="FileFormatVersion"><value>0</value></prop>
+ <prop oor:name="Type"><value>MediaWiki</value></prop>
+ <prop oor:name="DocumentService"><value>com.sun.star.text.WebDocument</value></prop>
+diff --git a/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Types.xcu b/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Types.xcu
+index 15e4f850041a..ce7cd0763b79 100644
+--- a/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Types.xcu
++++ b/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Types.xcu
+@@ -19,7 +19,7 @@
+ <!DOCTYPE oor:component-data SYSTEM "../../../../../../../../officecfg/registry/component-update.dtd">
+ <oor:component-data xmlns:oor="http://openoffice.org/2001/registry" xmlns:xs="http://www.w3.org/2001/XMLSchema" oor:package="org.openoffice.TypeDetection" oor:name="Types">
+ <node oor:name="Types">
+- <node oor:name="MediaWiki" oor:op="fuse">
++ <node oor:name="MediaWiki" oor:op="replace">
+ <prop oor:name="DetectService"><value>com.sun.star.comp.filters.XMLFilterDetect</value></prop>
+ <prop oor:name="URLPattern"/>
+ <prop oor:name="Extensions"><value>txt</value></prop>
--- /dev/null
+diff --git a/jvmfwk/plugins/sunmajor/javaenvsetup/javaldx.cxx b/jvmfwk/plugins/sunmajor/javaenvsetup/javaldx.cxx
+index 718902caba6f..3c8499b5a42c 100644
+--- a/jvmfwk/plugins/sunmajor/javaenvsetup/javaldx.cxx
++++ b/jvmfwk/plugins/sunmajor/javaenvsetup/javaldx.cxx
+@@ -141,6 +141,9 @@ static bool findAndSelect(JavaInfo ** ppInfo)
+ if (errcode == JFW_E_NO_JAVA_FOUND)
+ {
+ fprintf(stderr,"javaldx: Could not find a Java Runtime Environment!\n");
++ fprintf(stderr,"Please ensure that a JVM and the package libreoffice-java-common\n");
++ fprintf(stderr,"is installed.\n");
++ fprintf(stderr,"If it is already installed then try removing ~/.config/libreoffice/4/user/config/javasettings_Linux_*.xml\n");
+ return false;
+ }
+ else if (errcode != JFW_E_NONE && errcode != JFW_E_DIRECT_MODE)
+diff --git a/include/svtools/strings.hrc b/include/svtools/strings.hrc
+index f9dc617f4313..874b0400cbc5 100644
+--- a/include/svtools/strings.hrc
++++ b/include/svtools/strings.hrc
+@@ -281,13 +281,13 @@
+
+ #define STR_SVT_DEFAULT_SERVICE_LABEL NC_("STR_SVT_DEFAULT_SERVICE_LABEL", "$user$'s $service$")
+
+-#define STR_WARNING_JAVANOTFOUND NC_("STR_WARNING_JAVANOTFOUND", "%PRODUCTNAME requires a Java runtime environment (JRE) to perform this task. Please install a JRE and restart %PRODUCTNAME. %FAQLINK")
++#define STR_WARNING_JAVANOTFOUND NC_("STR_WARNING_JAVANOTFOUND", "%PRODUCTNAME requires a Java runtime environment (JRE) to perform this task. Please install a JRE (and libreoffice-java-common) and restart %PRODUCTNAME. %FAQLINK")
+ #define STR_WARNING_JAVANOTFOUND_WIN NC_("STR_WARNING_JAVANOTFOUND_WIN", "%PRODUCTNAME requires a %BITNESS-bit Java runtime environment (JRE) to perform this task. Please install a JRE and restart %PRODUCTNAME. %FAQLINK")
+ #define STR_WARNING_JAVANOTFOUND_MAC NC_("STR_WARNING_JAVANOTFOUND_MAC", "%PRODUCTNAME requires Oracle's Java Development Kit (JDK) on macOS 10.10 or greater to perform this task. Please install them and restart %PRODUCTNAME. %FAQLINK")
+ #define STR_WARNING_INVALIDJAVASETTINGS_MAC NC_("STR_WARNING_INVALIDJAVASETTINGS_MAC", "The %PRODUCTNAME configuration has been changed. Under %PRODUCTNAME - Preferences - %PRODUCTNAME - Advanced, select the Java runtime environment you want to have used by %PRODUCTNAME.")
+-#define STR_WARNING_INVALIDJAVASETTINGS NC_("STR_WARNING_INVALIDJAVASETTINGS", "The %PRODUCTNAME configuration has been changed. Under Tools - Options - %PRODUCTNAME - Advanced, select the Java runtime environment you want to have used by %PRODUCTNAME.")
++#define STR_WARNING_INVALIDJAVASETTINGS NC_("STR_WARNING_INVALIDJAVASETTINGS", "The %PRODUCTNAME configuration has been changed. Under Tools - Options - %PRODUCTNAME - Advanced, select the Java runtime environment you want to have used by %PRODUCTNAME. Maybe you also need to install libreoffice-java-common.")
+ #define STR_ERROR_JVMCREATIONFAILED_MAC NC_("STR_ERROR_JVMCREATIONFAILED_MAC", "%PRODUCTNAME requires a Java runtime environment (JRE) to perform this task. The selected JRE is defective. Please select another version or install a new JRE and select it under %PRODUCTNAME - Preferences - %PRODUCTNAME - Advanced.")
+-#define STR_ERROR_JVMCREATIONFAILED NC_("STR_ERROR_JVMCREATIONFAILED", "%PRODUCTNAME requires a Java runtime environment (JRE) to perform this task. The selected JRE is defective. Please select another version or install a new JRE and select it under Tools - Options - %PRODUCTNAME - Advanced.")
++#define STR_ERROR_JVMCREATIONFAILED NC_("STR_ERROR_JVMCREATIONFAILED", "%PRODUCTNAME requires a Java runtime environment (JRE) to perform this task. The selected JRE is defective. Please select another version or install a new JRE and select it under Tools - Options - %PRODUCTNAME - Advanced or install libreoffice-java-common if not already installed.")
+ #define STR_WARNING_JAVANOTFOUND_TITLE NC_("STR_WARNING_JAVANOTFOUND_TITLE", "JRE Required")
+ #define STR_WARNING_INVALIDJAVASETTINGS_TITLE NC_("STR_WARNING_INVALIDJAVASETTINGS_TITLE", "Select JRE")
+ #define STR_ERROR_JVMCREATIONFAILED_TITLE NC_("STR_ERROR_JVMCREATIONFAILED_TITLE", "JRE is Defective")
--- /dev/null
+diff --git a/sw/qa/uitest/options/optionsDialog.py b/sw/qa/uitest/options/optionsDialog.py
+index 086d16726a1a..0ef5458f7192 100644
+--- a/sw/qa/uitest/options/optionsDialog.py
++++ b/sw/qa/uitest/options/optionsDialog.py
+@@ -5,27 +5,32 @@
+ # file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ #
+ from uitest.framework import UITestCase
++import os
+
+ class optionsDialog(UITestCase):
+
++ # does network access (checks extensions.libreoffice.org), so disable it in "standard" make check
++ # but allow it on autopkgtest which has the needs-internet restriction
+ def test_moreIconsDialog(self):
+- with self.ui_test.create_doc_in_start_center("writer"):
+-
+- with self.ui_test.execute_dialog_through_command(".uno:OptionsTreeDialog") as xDialog:
++ if "AUTOPKGTEST_TMP" in os.environ:
++ with self.ui_test.create_doc_in_start_center("writer"):
+
+- xPages = xDialog.getChild("pages")
+- xLOEntry = xPages.getChild('0')
+- xLOEntry.executeAction("EXPAND", tuple())
+- xViewEntry = xLOEntry.getChild('2')
+- xViewEntry.executeAction("SELECT", tuple())
++ with self.ui_test.execute_dialog_through_command(".uno:OptionsTreeDialog") as xDialog:
+
+- xMoreIconsBtn = xDialog.getChild("btnMoreIcons")
++ xPages = xDialog.getChild("pages")
++ xLOEntry = xPages.getChild('0')
++ xLOEntry.executeAction("EXPAND", tuple())
++ xViewEntry = xLOEntry.getChild('2')
++ xViewEntry.executeAction("SELECT", tuple())
+
+- with self.ui_test.execute_blocking_action(xMoreIconsBtn.executeAction, args=('CLICK', ()), close_button="buttonClose") as dialog:
+- # Check it doesn't crash while opening it
+- xCloseBtn = dialog.getChild("buttonClose")
+- self.ui_test.wait_until_property_is_updated(xCloseBtn, "Enabled", "true")
++ xMoreIconsBtn = xDialog.getChild("btnMoreIcons")
+
++ with self.ui_test.execute_blocking_action(xMoreIconsBtn.executeAction, args=('CLICK', ()), close_button="buttonClose") as dialog:
++ # Check it doesn't crash while opening it
++ xCloseBtn = dialog.getChild("buttonClose")
++ self.ui_test.wait_until_property_is_updated(xCloseBtn, "Enabled", "true")
++ else:
++ print("Skipped")
+
+
+ def test_tdf138596(self):
--- /dev/null
+--- a/Makefile.in 2017-07-28 06:09:37.072183489 +0000
++++ b/Makefile.in 2017-10-18 12:43:59.215567467 +0000
+@@ -58,18 +58,6 @@ else # MAKE_RESTARTS
+
+ .DEFAULT_GOAL := build
+
+-# Nested test is to check if the systemd-detect-virt command doesn't exist or it reports we're not
+-# in a container:
+-check-if-root:
+- @if test ! `uname` = 'Haiku' -a `id -u` = 0; then \
+- if test ! -x "$$(command -v systemd-detect-virt)" || ! systemd-detect-virt -c -q; then \
+- echo; \
+- echo 'Building LibreOffice as root is a very bad idea, use a regular user.'; \
+- echo; \
+- exit 1; \
+- fi \
+- fi
+-
+ gb_Side ?= host
+
+ include $(BUILDDIR)/config_$(gb_Side).mk
+@@ -252,7 +244,7 @@ endif
+ #
+ # Bootstrap
+ #
+-bootstrap: check-if-root compilerplugins
++bootstrap: compilerplugins
+
+ #
+ # Build
--- /dev/null
+From b54cfe9d3d22fdd40f7015bd343df8620c983779 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Caol=C3=A1n=20McNamara?= <caolanm@redhat.com>
+Date: Mon, 27 Mar 2017 11:47:01 +0100
+Subject: [PATCH] Resolves: rhbz#1432468 disable opencl by default
+
+Change-Id: Ie037fcabdd219f195425979dd721501fb5527573
+---
+ officecfg/registry/schema/org/openoffice/Office/Common.xcs | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/officecfg/registry/schema/org/openoffice/Office/Common.xcs b/officecfg/registry/schema/org/openoffice/Office/Common.xcs
+index 946bd32..284d694 100644
+--- a/officecfg/registry/schema/org/openoffice/Office/Common.xcs
++++ b/officecfg/registry/schema/org/openoffice/Office/Common.xcs
+@@ -5670,7 +5670,7 @@
+ <desc>Determines whether OpenCL can be used, when available, to speed up
+ some operations.</desc>
+ </info>
+- <value>true</value>
++ <value>false</value>
+ </prop>
+ <prop oor:name="OpenCLDenyList" oor:type="oor:string-list" oor:nillable="false">
+ <!-- UIHints: Tools - Options General OpenCL -->
+--
+2.9.3
+
--- /dev/null
+diff --git a/officecfg/registry/data/org/openoffice/Office/Common.xcu b/officecfg/registry/data/org/openoffice/Office/Common.xcu
+index 3d138551b593..9cb9831f3236 100644
+--- a/officecfg/registry/data/org/openoffice/Office/Common.xcu
++++ b/officecfg/registry/data/org/openoffice/Office/Common.xcu
+@@ -551,13 +551,13 @@
+ </node>
+ <node oor:name="PackageKit">
+ <prop oor:name="EnableFontInstallation" oor:type="xs:boolean">
+- <value install:module="unx">true</value>
++ <value install:module="unx">false</value>
+ </prop>
+ <prop oor:name="EnableLangpackInstallation" oor:type="xs:boolean">
+- <value install:module="unx">true</value>
++ <value install:module="unx">false</value>
+ </prop>
+ <prop oor:name="EnableBaseInstallation" oor:type="xs:boolean">
+- <value install:module="unx">true</value>
++ <value install:module="unx">false</value>
+ </prop>
+ </node>
+ <node oor:name="Classification">
--- /dev/null
+diff --git a/dbaccess/inc/strings.hrc b/dbaccess/inc/strings.hrc
+index 47068f43d09e..1f8b9a2331b6 100644
+--- a/dbaccess/inc/strings.hrc
++++ b/dbaccess/inc/strings.hrc
+@@ -349,7 +349,7 @@
+ #define STR_WARNINGS_DURING_CONNECT NC_("STR_WARNINGS_DURING_CONNECT", "Warnings were encountered while connecting to the data source. Press \"$buttontext$\" to view them.")
+ #define STR_NAMED_OBJECT_ALREADY_EXISTS NC_("STR_NAMED_OBJECT_ALREADY_EXISTS", "The name '$#$' already exists.\nPlease enter another name." )
+ // #i96130# use hard coded name
+-#define RID_STR_EXTENSION_NOT_PRESENT NC_("RID_STR_EXTENSION_NOT_PRESENT", "The report, \"$file$\", requires the Report Builder feature.")
++#define RID_STR_EXTENSION_NOT_PRESENT NC_("RID_STR_EXTENSION_NOT_PRESENT", "The report, \"$file$\", requires the Report Builder feature. For this, install the package 'libreoffice-report-builder'.")
+
+ #define STR_COULDNOTCREATE_DRIVERMANAGER NC_("STR_COULDNOTCREATE_DRIVERMANAGER", "Cannot connect to the SDBC driver manager (#servicename#).")
+ #define STR_NOREGISTEREDDRIVER NC_("STR_NOREGISTEREDDRIVER", "A driver is not registered for the URL #connurl#.")
--- /dev/null
+diff --git a/vcl/inc/impimagetree.hxx b/vcl/inc/impimagetree.hxx
+index 41c4f56..93d80f1 100644
+--- a/vcl/inc/impimagetree.hxx
++++ b/vcl/inc/impimagetree.hxx
+@@ -85,6 +85,10 @@ private:
+ typedef boost::unordered_map<
+ rtl::OUString, std::pair< bool, BitmapEx >, rtl::OUStringHash > IconCache;
+
++ // we want to search zip files (icons) also in /usr/share/
++ ::rtl::OUString m_datadir; // /usr/share/
++ ::rtl::OUString m_libdir; // /usr/lib or /usr/lib64
++
+ rtl::OUString m_style;
+ Zips m_zips;
+ CheckStyleCache m_checkStyleCache;
+@@ -92,6 +96,7 @@ private:
+
+ void setStyle(rtl::OUString const & style );
+
++ void addUrlToZips(const rtl::OUString &url);
+ void resetZips();
+
+ bool checkStyleCacheLookup( rtl::OUString const & style, bool &exists );
+diff --git a/vcl/source/gdi/impimagetree.cxx b/vcl/source/gdi/impimagetree.cxx
+index 03442fc..cfe6c45 100644
+--- a/vcl/source/gdi/impimagetree.cxx
++++ b/vcl/source/gdi/impimagetree.cxx
+@@ -121,7 +121,11 @@ void loadFromStream(
+
+ }
+
+-ImplImageTree::ImplImageTree() {}
++ImplImageTree::ImplImageTree()
++{
++ m_datadir = ::rtl::OUString::createFromAscii ( "/usr/share/" );
++ m_libdir = ::rtl::OUString::createFromAscii ( "/usr/lib/" );
++}
+
+ ImplImageTree::~ImplImageTree() {}
+
+@@ -259,6 +263,22 @@ void ImplImageTree::setStyle(rtl::OUString const & style) {
+ }
+ }
+
++void ImplImageTree::addUrlToZips(const rtl::OUString &url) {
++ if ( url.getLength() == 0 )
++ return;
++ m_zips.push_back(
++ std::make_pair(
++ url,
++ css::uno::Reference< css::container::XNameAccess >()));
++ sal_Int32 nLibDirPos = url.indexOf( m_libdir );
++ if ( nLibDirPos >= 0 ) {
++ m_zips.push_back(
++ std::make_pair(
++ url.replaceAt( nLibDirPos, m_libdir.getLength(), m_datadir ),
++ css::uno::Reference< css::container::XNameAccess >()));
++ }
++}
++
+ void ImplImageTree::resetZips() {
+ m_zips.clear();
+ {
+@@ -284,19 +304,14 @@ void ImplImageTree::resetZips() {
+ b.appendAscii(RTL_CONSTASCII_STRINGPARAM("_brand.zip"));
+ bool ok = u.Append(b.makeStringAndClear(), INetURLObject::ENCODE_ALL);
+ OSL_ASSERT(ok); (void) ok;
+- m_zips.push_back(
+- std::make_pair(
+- u.GetMainURL(INetURLObject::NO_DECODE),
+- css::uno::Reference< css::container::XNameAccess >()));
++ addUrlToZips(u.GetMainURL(INetURLObject::NO_DECODE));
+ }
+ {
+ rtl::OUString url(
+ RTL_CONSTASCII_USTRINGPARAM(
+ "$BRAND_BASE_DIR/share/config/images_brand.zip"));
+ rtl::Bootstrap::expandMacros(url);
+- m_zips.push_back(
+- std::make_pair(
+- url, css::uno::Reference< css::container::XNameAccess >()));
++ addUrlToZips(url);
+ }
+ {
+ rtl::OUString url(
+@@ -310,10 +310,7 @@
+ b.appendAscii(RTL_CONSTASCII_STRINGPARAM(".zip"));
+ bool ok = u.Append(b.makeStringAndClear(), INetURLObject::ENCODE_ALL);
+ OSL_ASSERT(ok); (void) ok;
+- m_zips.push_back(
+- std::make_pair(
+- u.GetMainURL(INetURLObject::NO_DECODE),
+- css::uno::Reference< css::container::XNameAccess >()));
++ addUrlToZips(u.GetMainURL(INetURLObject::NO_DECODE));
+ }
+ if ( m_style == "default" )
+ {
+@@ -321,9 +333,7 @@ void ImplImageTree::resetZips() {
+ RTL_CONSTASCII_USTRINGPARAM(
+ "$BRAND_BASE_DIR/share/config/images.zip"));
+ rtl::Bootstrap::expandMacros(url);
+- m_zips.push_back(
+- std::make_pair(
+- url, css::uno::Reference< css::container::XNameAccess >()));
++ addUrlToZips(url);
+ }
+ }
+
+diff --git a/xmlhelp/source/cxxhelp/provider/provider.cxx b/xmlhelp/source/cxxhelp/provider/provider.cxx
+index e55fe5d..848bed7 100644
+--- a/xmlhelp/source/cxxhelp/provider/provider.cxx
++++ b/xmlhelp/source/cxxhelp/provider/provider.cxx
+@@ -335,7 +335,7 @@ void ContentProvider::init()
+ rtl::OUString(RTL_CONSTASCII_USTRINGPARAM( " " )) +
+ setupextension );
+
+- uno::Sequence< rtl::OUString > aImagesZipPaths( 2 );
++ uno::Sequence< rtl::OUString > aImagesZipPaths( 3 );
+ xHierAccess = getHierAccess( sProvider, "org.openoffice.Office.Common" );
+
+ rtl::OUString aPath( getKey( xHierAccess, "Path/Current/UserConfig" ) );
+@@ -344,6 +344,15 @@ void ContentProvider::init()
+
+ aPath = rtl::OUString(RTL_CONSTASCII_USTRINGPARAM("$BRAND_BASE_DIR/share/config"));
+ rtl::Bootstrap::expandMacros(aPath);
++ aImagesZipPaths[ 2 ] = aPath;
++
++ // try also /usr/share and even before /usr/lib
++ ::rtl::OUString aDataDir = ::rtl::OUString::createFromAscii ( "/usr/share/" );
++ ::rtl::OUString aLibDir = ::rtl::OUString::createFromAscii ( "/usr/lib/" );
++ sal_Int32 nLibDirPos = aPath.indexOf( aLibDir );
++
++ if ( nLibDirPos >= 0 )
++ aPath = aPath.replaceAt( nLibDirPos, aLibDir.getLength(), aDataDir );
+ aImagesZipPaths[ 1 ] = aPath;
+
+ uno::Reference< uno::XComponentContext > xContext;
--- /dev/null
+Index: libreoffice-3.6.2~rc1/officecfg/registry/data/org/openoffice/Office/Common.xcu
+===================================================================
+--- libreoffice-3.6.2~rc1.orig/officecfg/registry/data/org/openoffice/Office/Common.xcu 2012-10-07 21:03:17.662850386 -0400
++++ libreoffice-3.6.2~rc1/officecfg/registry/data/org/openoffice/Office/Common.xcu 2012-10-07 21:03:57.174850591 -0400
+@@ -655,7 +655,7 @@
+ </node>
+ <node oor:name="ExternalMailer" install:module="unixdesktop">
+ <prop oor:name="Program">
+- <value oor:external="com.sun.star.configuration.backend.DesktopBackend ExternalMailer"/>
++ <value>sensible-lomua</value>
+ </prop>
+ </node>
+ <node oor:name="Font">
+Index: libreoffice-3.6.2~rc1/shell/source/unix/misc/senddoc.sh
+===================================================================
+--- libreoffice-3.6.2~rc1.orig/shell/source/unix/misc/senddoc.sh 2012-10-07 21:03:17.662850386 -0400
++++ libreoffice-3.6.2~rc1/shell/source/unix/misc/senddoc.sh 2012-10-07 21:29:13.074858447 -0400
+@@ -59,6 +59,32 @@
+ shift
+ fi
+
++case `basename "$MAILER"` in
++ sensible-lomua)
++ if [ -x /usr/bin/xdg-email ] ; then
++ MAILER=/usr/bin/xdg-email
++ elif [ -n "$KDE_FULL_SESSION" -a -x /usr/bin/kde-open ] \
++ || [ -x /usr/bin/gnome-open ] \
++ || [ -x /usr/bin/xdg-open ]; then
++ # use an undefined mailer, to trigger the default handling
++ MAILER=undefined
++ elif [ -n "$GNOME_DESKTOP_SESSION_ID" -a -x /usr/bin/evolution ]; then
++ MAILER=/usr/bin/evolution
++ elif [ -n "$KDE_FULL_SESSION" -a -x /usr/bin/kmail ]; then
++ MAILER=/usr/bin/kmail
++ elif [ -x /usr/bin/evolution ]; then
++ # default
++ MAILER=/usr/bin/evolution
++ elif [ -x /usr/bin/icedove ]; then
++ # fallback
++ MAILER=/usr/bin/icedove
++ elif [ -x /usr/bin/thunderbird ]; then
++ # fallback
++ MAILER=/usr/bin/thunderbird
++ fi
++ ;;
++esac
++
+ # autodetect mail client from executable name
+ case $(basename "$MAILER" | sed 's/-.*$//') in
+
--- /dev/null
+no-check-if-root.diff
+debian-opt.diff
+jurt-soffice-location.diff
+split-evoab.diff
+debian-debug.diff
+#fix-system-lpsolve-build.diff
+build-against-shared-lpsolve.diff
+install-fixes.diff
+mention-java-common-package.diff
+help-msg-add-package-info.diff
+sensible-lomua.diff
+reportdesign-mention-package.diff
+jdbc-driver-classpaths.diff
+#search-usr-share-for-images.diff
+make-package-modules-not-suck.diff
+mediwiki-oor-replace.diff
+debian-hardened-buildflags-CPPFLAGS.diff
+debian-hardened-buildflags-no-LO-fstack-protector-strong.diff
+disable-flaky-tests.diff
+#dont-touch-urd.diff
+fix-internal-hsqldb-build.diff
+javadoc-optional.diff
+hppa-is-32bit.diff
+no-packagekit-per-default.diff
+system-officeotron-and-odfvalidator.diff
+cppunit-optional.diff
+#disable-unused-test-programs.diff
+apparmor-complain.diff
+hide-math-desktop-file.patch
+appstream-ignore-startcenter.diff
+disable-java-in-odk-build-examples-on-zero-vm.diff
+do-not-hide-test-output.diff
+apparmor-allow-java.security.diff
+apparmor-cleanups.diff
+apparmor-mesa.diff
+disableClassPathURLCheck.diff
+use-mariadb-java-instead-of-mysql-java.diff
+apparmor-opencl.diff
+fix-flaky-bridgetest.diff
+add-access2base-doc.diff
+disable-shortcuts_tab_navigation-uitest.diff
+no-opencl-per-default.diff
+apparmor-updates.diff
+apparmor-gnupg-tofu.diff
+temporarily-disable-test-metadata-test.diff
+arm-fp-mode.diff
+moreIconsDialog-accesses-internet.diff
+do-not-ABORT_ON_NON_APPLICATION_FONT_USE.diff
+hrk-euro.diff
+dragonbox-1.1.3.diff
+fix-system-libfixmath.diff
+boost-1.81.diff
+0004-Remove-dependency-on-BitArray.h-from-zxing-1.2.0.patch
--- /dev/null
+diff --git a/scp2/source/gnome/file_gnome.scp b/scp2/source/gnome/file_gnome.scp
+index c7a13c8..a3f59a6 100644
+--- a/scp2/source/gnome/file_gnome.scp
++++ b/scp2/source/gnome/file_gnome.scp
+@@ -25,3 +25,13 @@ File gid_File_Share_Registry_Gnome_Xcd
+ Name = "gnome.xcd";
+ End
+ #endif
++
++#ifdef ENABLE_EVOAB2
++File gid_File_Share_Registry_Evoab_Xcd
++ TXT_FILE_BODY;
++ Styles = (PACKED);
++ Dir = gid_Brand_Dir_Share_Registry;
++ Name = "evoab.xcd";
++End
++#endif
++
+diff --git a/scp2/source/gnome/module_gnome.scp b/scp2/source/gnome/module_gnome.scp
+index 08d9efe..492e274 100644
+--- a/scp2/source/gnome/module_gnome.scp
++++ b/scp2/source/gnome/module_gnome.scp
+@@ -31,6 +31,9 @@ Module gid_Module_Optional_Gnome
+ #if ENABLE_GIO
+ ,gid_File_Share_Registry_Gnome_Xcd
+ #endif
++#ifdef ENABLE_EVOAB2
++ ,gid_File_Share_Registry_Evoab_Xcd
++#endif
+ );
+ End
+
+diff --git a/postprocess/CustomTarget_registry.mk b/postprocess/CustomTarget_registry.mk
+index 37de50bcbe56..1e0f37957ebf 100644
+--- a/postprocess/CustomTarget_registry.mk
++++ b/postprocess/CustomTarget_registry.mk
+@@ -453,7 +453,8 @@ postprocess_FILES_calc += \
+ postprocess_DRIVERS += calc
+
+ ifeq ($(ENABLE_EVOAB2),TRUE)
+-postprocess_FILES_main += \
++postprocess_XCDS += evoab.xcd
++postprocess_FILES_evoab += \
+ $(call gb_XcuModuleTarget_get_target,connectivity/registry/evoab2)/org/openoffice/Office/DataAccess/Drivers-evoab2.xcu \
+ $(postprocess_MOD)/org/openoffice/Office/DataAccess-evoab2.xcu
+ postprocess_DRIVERS += evoab
+diff --git a/scp2/InstallModule_gnome.mk b/scp2/InstallModule_gnome.mk
+index c33f4f52d67b..8f06c0273eff 100644
+--- a/scp2/InstallModule_gnome.mk
++++ b/scp2/InstallModule_gnome.mk
+@@ -19,4 +19,8 @@ $(eval $(call gb_InstallModule_add_localized_scpfiles,scp2/gnome,\
+ scp2/source/gnome/module_gnome \
+ ))
+
++$(eval $(call gb_InstallModule_define_if_set,scp2/gnome,\
++ ENABLE_EVOAB2 \
++))
++
+ # vim: set shiftwidth=4 tabstop=4 noexpandtab:
--- /dev/null
+diff --git a/bin/odfvalidator.sh.in b/bin/odfvalidator.sh.in
+index 56e2f29..9415ef6 100644
+--- a/bin/odfvalidator.sh.in
++++ b/bin/odfvalidator.sh.in
+@@ -1,2 +1,2 @@
+ #!/usr/bin/env bash
+-java -Djavax.xml.validation.SchemaFactory:http://relaxng.org/ns/structure/1.0=org.iso_relax.verifier.jaxp.validation.RELAXNGSchemaFactoryImpl -Dorg.iso_relax.verifier.VerifierFactoryLoader=com.sun.msv.verifier.jarv.FactoryLoaderImpl -jar @TARFILE_LOCATION@/@ODFVALIDATOR_JAR@ "$@"
++java -Djavax.xml.validation.SchemaFactory:http://relaxng.org/ns/structure/1.0=org.iso_relax.verifier.jaxp.validation.RELAXNGSchemaFactoryImpl -Dorg.iso_relax.verifier.VerifierFactoryLoader=com.sun.msv.verifier.jarv.FactoryLoaderImpl -jar /usr/share/java/odfvalidator.jar "$@"
+diff --git a/bin/officeotron.sh.in b/bin/officeotron.sh.in
+index 7281f1b..6eab5b5 100644
+--- a/bin/officeotron.sh.in
++++ b/bin/officeotron.sh.in
+@@ -1,2 +1,2 @@
+ #!/usr/bin/env bash
+-java -jar @TARFILE_LOCATION@/@OFFICEOTRON_JAR@ "$@"
++java -jar /usr/share/java/officeotron.jar "$@"
--- /dev/null
+diff --git a/sw/qa/uitest/styleInspector/styleInspector.py b/sw/qa/uitest/styleInspector/styleInspector.py
+index 49d02fc01c9b..d1e9d30711e9 100644
+--- a/sw/qa/uitest/styleInspector/styleInspector.py
++++ b/sw/qa/uitest/styleInspector/styleInspector.py
+@@ -131,69 +131,6 @@ class styleNavigator(UITestCase):
+
+ self.xUITest.executeCommand(".uno:Sidebar")
+
+- def test_metadata(self):
+- with self.ui_test.load_file(get_url_for_data_file("metadata.odt")):
+- xWriterDoc = self.xUITest.getTopFocusWindow()
+- xWriterEdit = xWriterDoc.getChild("writer_edit")
+-
+- self.xUITest.executeCommand(".uno:Sidebar")
+- xWriterEdit.executeAction("SIDEBAR", mkPropertyValues({"PANEL": "InspectorTextPanel"}))
+-
+- xListBox = xWriterEdit.getChild('listbox_fonts')
+-
+- # The cursor is on text without metadata
+- self.assertEqual(1, len(xListBox.getChild('0').getChildren()))
+- self.assertEqual("Default Paragraph Style\t", get_state_as_dict(xListBox.getChild('0').getChild('0'))['Text'])
+- self.assertEqual(140, len(xListBox.getChild('0').getChild('0').getChildren()))
+- self.assertEqual(0, len(xListBox.getChild('1').getChildren()))
+- self.assertEqual(0, len(xListBox.getChild('2').getChildren()))
+- self.assertEqual(0, len(xListBox.getChild('3').getChildren()))
+-
+- self.xUITest.executeCommand(".uno:GoDown")
+-
+- # The cursor is on text with paragraph metadata showed under direct paragraph formatting
+- self.assertEqual(1, len(xListBox.getChild('0').getChildren()))
+- self.assertEqual("Default Paragraph Style\t", get_state_as_dict(xListBox.getChild('0').getChild('0'))['Text'])
+- self.assertEqual(140, len(xListBox.getChild('0').getChild('0').getChildren()))
+-
+- xParDirFormatting = xListBox.getChild('1')
+- self.assertEqual(1, len(xParDirFormatting.getChildren()))
+- self.assertEqual("Metadata Reference\t", get_state_as_dict(xParDirFormatting.getChild('0'))['Text'])
+-
+- xMetadata = xParDirFormatting.getChild('0')
+- self.assertEqual(4, len(xMetadata.getChildren()))
+- self.assertEqual("xml:id\tpara1", get_state_as_dict(xMetadata.getChild('0'))['Text'])
+- self.assertEqual("http://www.w3.org/1999/02/22-rdf-syntax-ns#type\tParagraph", get_state_as_dict(xMetadata.getChild('1'))['Text'])
+- self.assertEqual("http://www.w3.org/2000/01/rdf-schema#comment\tAbout this paragraph...", get_state_as_dict(xMetadata.getChild('2'))['Text'])
+- self.assertEqual("http://www.w3.org/2000/01/rdf-schema#label\tAnnotated paragraph", get_state_as_dict(xMetadata.getChild('3'))['Text'])
+-
+- self.xUITest.executeCommand(".uno:GoDown")
+- # FIXME jump over the control character (not visible in getString(), but it affects
+- # cursor position and availability of NestedTextContent)
+- self.xUITest.executeCommand(".uno:GoRight")
+-
+- # The cursor is on text with annotated text range
+- xDirFormatting = xListBox.getChild('0')
+- self.assertEqual("Fields\t", get_state_as_dict(xListBox.getChild('0'))['Text'])
+- self.assertEqual(1, len(xDirFormatting.getChildren()))
+- self.assertEqual("Metadata Reference\t", get_state_as_dict(xDirFormatting.getChild('0'))['Text'])
+-
+- xMetadata = xDirFormatting.getChild('0')
+- self.assertEqual(4, len(xMetadata.getChildren()))
+- self.assertEqual("xml:id\tid2758386667", get_state_as_dict(xMetadata.getChild('0'))['Text'])
+- self.assertEqual("http://www.w3.org/1999/02/22-rdf-syntax-ns#type\tText span", get_state_as_dict(xMetadata.getChild('1'))['Text'])
+- self.assertEqual("http://www.w3.org/2000/01/rdf-schema#comment\tComment...", get_state_as_dict(xMetadata.getChild('2'))['Text'])
+- self.assertEqual("http://www.w3.org/2000/01/rdf-schema#label\tAnnotated paragraph portion", get_state_as_dict(xMetadata.getChild('3'))['Text'])
+-
+- xDirFormatting = xListBox.getChild('4')
+- self.assertEqual(1, len(xDirFormatting.getChildren()))
+- self.assertEqual("Nested Text Content\tAnnotated text range", get_state_as_dict(xDirFormatting.getChild('0'))['Text'])
+-
+- self.assertEqual(0, len(xListBox.getChild('2').getChildren()))
+- self.assertEqual(0, len(xListBox.getChild('3').getChildren()))
+-
+- self.xUITest.executeCommand(".uno:Sidebar")
+-
+ def test_bookmark_metadata(self):
+ with self.ui_test.load_file(get_url_for_data_file("bookmark-metadata.odt")):
+ xWriterDoc = self.xUITest.getTopFocusWindow()
--- /dev/null
+>From 1172166889764ae0e77488e5d173f33961b9859b Mon Sep 17 00:00:00 2001
+From: Markus Koschany <apo@debian.org>
+Date: Fri, 9 Nov 2018 23:06:15 +0100
+Subject: [PATCH] mariadb
+
+---
+ connectivity/qa/complex/connectivity/JdbcLongVarCharTest.java | 4 ++--
+ .../mysql/org/openoffice/Office/DataAccess/Drivers.xcu | 2 +-
+ connectivity/source/drivers/mysql/YDriver.cxx | 4 ++--
+ 3 files changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/connectivity/qa/complex/connectivity/JdbcLongVarCharTest.java b/connectivity/qa/complex/connectivity/JdbcLongVarCharTest.java
+index 3817add48da6..ace57bd35d98 100644
+--- a/connectivity/qa/complex/connectivity/JdbcLongVarCharTest.java
++++ b/connectivity/qa/complex/connectivity/JdbcLongVarCharTest.java
+@@ -64,7 +64,7 @@ public class JdbcLongVarCharTest extends ComplexTestCase
+ */
+ String url = System.getenv("CONNECTIVITY_TEST_MYSQL_DRIVER_JDBC");
+ com.sun.star.beans.PropertyValue prop[] = new PropertyValue[1];
+- prop[0] = new PropertyValue("JavaDriverClass", 0, "com.mysql.jdbc.Driver", PropertyState.DIRECT_VALUE);
++ prop[0] = new PropertyValue("JavaDriverClass", 0, "org.mariadb.jdbc.Driver", PropertyState.DIRECT_VALUE);
+
+ // get the remote office component context
+ XMultiServiceFactory xServiceManager = param.getMSF();
+diff --git a/connectivity/registry/mysql/org/openoffice/Office/DataAccess/Drivers.xcu b/connectivity/registry/mysql/org/openoffice/Office/DataAccess/Drivers.xcu
+index 77988448f..acd8bfdaf 100644
+--- a/connectivity/registry/mysql_jdbc/org/openoffice/Office/DataAccess/Drivers.xcu
++++ b/connectivity/registry/mysql_jdbc/org/openoffice/Office/DataAccess/Drivers.xcu
+@@ -33,7 +33,7 @@
+ </node>
+ <node oor:name="JavaDriverClass" oor:op="replace">
+ <prop oor:name="Value" oor:type="xs:string">
+- <value>com.mysql.jdbc.Driver</value>
++ <value>org.mariadb.jdbc.Driver</value>
+ </prop>
+ </node>
+ <node oor:name="AddIndexAppendix" oor:op="replace">
+diff --git a/connectivity/source/drivers/mysql/YDriver.cxx b/connectivity/source/drivers/mysql/YDriver.cxx
+index 95094265e..c0ad7802e 100644
+--- a/connectivity/source/drivers/mysql_jdbc/YDriver.cxx
++++ b/connectivity/source/drivers/mysql_jdbc/YDriver.cxx
+@@ -54,7 +54,7 @@ namespace
+ OUString getJavaDriverClass(css::uno::Sequence<css::beans::PropertyValue> const& info)
+ {
+ return comphelper::NamedValueCollection::getOrDefault(info, u"JavaDriverClass",
+- OUString("com.mysql.jdbc.Driver"));
++ OUString("org.mariadb.jdbc.Driver"));
+ }
+ }
+
+@@ -170,7 +170,7 @@ Sequence<PropertyValue> lcl_convertProperties(T_DRIVERTYPE _eType,
+ if (!jdc)
+ {
+ aProps.push_back(PropertyValue("JavaDriverClass", 0,
+- Any(OUString("com.mysql.jdbc.Driver")),
++ Any(OUString("org.mariadb.jdbc.Driver")),
+ PropertyState_DIRECT_VALUE));
+ }
+ }
--- /dev/null
+usr/share/doc/libreoffice-common/access2base.html usr/share/doc/python3-access2base/access2base.html
--- /dev/null
+libreoffice (1:3.5.2-2) unstable; urgency=low
+
+ * The script provider for python (which was in python3-uno before) has been
+ split out into libreoffice-script-provider-python as it's the same in both
+ variants and python3-uno should contain just the module anyway.
+
+ If you relied on python3-uno for the script provider, install the new
+ package in addition.
+
+ -- Rene Engelhard <rene@debian.org> Sat, 07 Apr 2012 14:30:41 +0200
+
--- /dev/null
+# "aged out" due to debhelpers changelog trimming (see #1021502)
+python3-uno: debian-news-entry-has-unknown-version 1:3.5.2-2 [usr/share/doc/python3-uno/NEWS.Debian.gz:1]
--- /dev/null
+/usr/lib/libreoffice/share/.registry/pyuno.xcd /etc/libreoffice/registry/pyuno.xcd
--- /dev/null
+#!/usr/bin/make -f
+################################################################################
+# LibreOffice source package rules file
+#
+# Please see debian/README for detailed documentation about the build system, and
+# how to build LibreOffice.
+################################################################################
+# Authors:
+# Chris Halls <halls@debian.org>
+# Rene Engelhard <rene@debian.org>
+# Copyright 2002-2022 Software in the Public Interest, Inc.
+# Portions Copyright 2010 Canonical Ltd. Author: Matthias Klose
+# Portions Copyright 2011-2013 Canonical Ltd. Author: Bjoern Michaelsen
+# Licensed under the GNU General Public License, version 2. See the file
+# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
+################################################################################
+
+vafilt = $(subst $(2)=,,$(filter $(2)=%,$(1)))
+
+include /usr/share/dpkg/pkg-info.mk
+CURDIR ?= $(realpath $(dir $(firstword $(MAKEFILE_LIST)))/..)
+BASE_VERSION:=$(shell echo $(DEB_VERSION) | cut -d: -f1):$(DEB_VERSION_UPSTREAM)
+BINARY_VERSION=$(DEB_VERSION)
+#HELP_L10N_VIRTUAL_VERSION:=$(shell echo $(DEB_VERSION_UPSTREAM) | cut -d: -f2 | tr [~] [\\-])
+HELP_L10N_VIRTUAL_VERSION:=7.4
+OOVER:=7.4
+NEXT_OOVER:=$(shell echo "$(OOVER) + 0.1" | bc)
+
+ARCH_INDEP_PACKAGES := $(shell dh_listpackages -i)
+ARCH_DEP_PACKAGES := $(shell dh_listpackages -a)
+PACKAGES := $(ARCH_INDEP_PACKAGES) $(ARCH_DEP_PACKAGES)
+
+ifneq (,$(shell pwd | grep autopkgtest))
+AUTOPKGTEST_BUILD=y
+$(warning Build for autopkgtest)
+endif
+AUTOPKGTEST_CPPUNIT_PACKAGES := $(shell dh_listpackages | grep -v help | grep -v l10n | grep -v dev-doc | grep -v "nogui$$")
+
+include /usr/share/dpkg/architecture.mk
+include /usr/share/dpkg/vendor.mk
+SHELL:=/bin/bash
+
+SYSTEM_GCC_VERSION = $(shell gcc --version | sed -n '/^gcc/s/.*\(..\..\)\../\1/p' | cut -d" " -f1)
+SYSTEM_CLANG_VERSION = $(shell clang -v 2>&1 | head -n1 | awk '{ print $$4 }' | cut -d. -f1)
+
+PKGDIR:=debian/libreoffice
+OODIRNAME=libreoffice
+OODIR:=usr/lib/$(OODIRNAME)
+OOSDKDIR:=$(OODIR)/sdk
+
+# Figure out who's building this package.
+ifneq "$(DEB_VENDOR)" "Debian"
+OOO_VENDOR:=The Document Foundation, $(DEB_PARENT_VENDOR) and $(DEB_VENDOR)
+else
+OOO_VENDOR=The Document Foundation/$(DEB_VENDOR)
+endif
+export OOO_VENDOR
+
+# debhelper
+export DH_OPTIONS
+export DH_ALWAYS_EXCLUDE=CVS:.svn:.bzr:.git
+#export DH_VERBOSE=1
+# quilt
+export QUILT_PATCHES=debian/patches
+export QUILT_OPTIONS="-p1 -F0"
+
+SOURCE_TREE=.
+STAMP_DIR=debian/stampdir
+TARFILE_LOCATION=$(CURDIR)/tarballs
+export TARFILE_LOCATION
+USE_SOURCE_TARBALLS=y
+USE_GIT_TARBALLS=n
+ifeq "$(USE_GIT_TARBALLS)" "y"
+GIT_BASEURL:=git://anongit.freedesktop.org/libreoffice
+lo_sources_ver=$(shell grep AC_INIT $(SOURCE_TREE)/configure.ac | grep documentfoundation | cut -d, -f2 | sed -e 's,\[,,' -e 's,\],,')
+# NOT in proper libreoffice-3-6 branch
+# use ./g checkout -b tag-libreoffice-3.6.2.1 libreoffice-3.6.2.1
+GIT_TAG=libreoffice-$(lo_sources_ver)
+GIT_BRANCH=libreoffice-7.4.5.1
+endif
+ifeq "$(USE_SOURCE_TARBALLS)" "y"
+lo_sources_ver=$(shell cat $(CURDIR)/sources.ver | cut -d= -f2)
+endif
+
+#########
+# Default package configuration
+#
+OOO_ARCHS = alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+PATCHSET=$(DEB_VENDOR)
+BUILD_DEPS=\
+ autoconf,\
+ automake,\
+ bc,\
+ bison,\
+ bzip2,\
+ flex (>= 2.3.35), \
+ fontforge-nox | fontforge, \
+ gperf (>= 3.1),\
+ libc0.1 (>= 2.10.2-7) [kfreebsd-any],\
+ libfontconfig-dev,\
+ pkg-config,\
+ unzip,\
+ xsltproc,\
+ zip,\
+ zlib1g-dev\
+
+BUILD_DEPS_INDEP += rdfind, symlinks
+
+# These are components which can be built from internal copies, or used from the
+# distribution. See configure --help for valid values (--with-system-<value>).
+SYSTEM_STUFF = dicts
+
+ENABLE_GUI=y
+
+ifeq ($(filter nopython,$(DEB_BUILD_PROFILES)),)
+ENABLE_PYTHON=y
+ifeq "$(ENABLE_PYTHON)" "y"
+ CONFIGURE_FLAGS += --enable-python=system
+ ENABLE_SCRIPT_PROVIDER_PYTHON=y
+ PACKAGE_LIBRELOGO=y
+endif
+# THIS IS ONLY FOR TESTING. When building against a specified pythonX.Y
+# this will work inside OOo but *not* from outside OOo unless the user
+# uses pythonX.Y directly (and the dh_pycentral-created dependencies allow
+# also the non-working default python then) - see e.g. #587402. Also
+# note we are NOT working with python < 2.6 anymore!
+PYTHON_VERSION=current
+ifeq "$(PYTHON_VERSION)" "current"
+ PYTHON=python3
+ export PYTHON
+else
+ # somehow configure insists on using python3 "for pyuno". The only way to
+ # override this (afaics) is this...
+ PYTHON=python$(PYTHON_VERSION)
+ PYTHON_CFLAGS=$(shell pkg-config --cflags python-$(PYTHON_VERSION))
+ PYTHON_LIBS=$(shell pkg-config --libs python-$(PYTHON_VERSION))
+ export PYTHON PYTHON_VERSION PYTHON_CFLAGS PYTHON_LIBS
+endif
+endif
+BUILD_ONLY_EN_US=n
+ifeq ($(filter nojava,$(DEB_BUILD_PROFILES)),)
+ ENABLE_JAVA=y
+ ifeq "$(ENABLE_JAVA)" "y"
+ JDK=default
+ include /usr/share/java/java_defaults.mk
+ ifneq "$(JDK)" "default"
+ JAVA_MAINVER=7
+ endif
+ endif
+else
+ ENABLE_JAVA=n
+endif
+JAVAHELPER_MIN_VERSION= (>= 0.37~)
+SYSTEM_STUFF += hunspell
+SYSTEM_STUFF += altlinuxhyph
+SYSTEM_STUFF += boost
+BOOST_VERSION=default
+ifeq "$(BOOST_VERSION)" "default"
+ BOOST_MINVER= (>= 1.71)
+endif
+# libmdds-dev depends on libboost-dev, which will be removed
+# when you install a non-default libboostX.Y-dev
+ifeq "$(BOOST_VERSION)" "default"
+SYSTEM_STUFF += mdds
+endif
+USE_EXTERNAL_CXXLIBS=y
+SYSTEM_STUFF += mythes
+SYSTEM_STUFF += icu
+SYSTEM_STUFF += librevenge
+SYSTEM_STUFF += libwpd libwpg libwps
+SYSTEM_STUFF += libvisio
+SYSTEM_STUFF += libcdr
+SYSTEM_STUFF += libmspub
+SYSTEM_STUFF += libmwaw
+SYSTEM_STUFF += libodfgen
+SYSTEM_STUFF += libepubgen
+SYSTEM_STUFF += libetonyek
+SYSTEM_STUFF += libfreehand
+# this is libe-book, NOT evolutions libebook (which is
+# dlopen()'ed anyway and whose headers we need from the
+# system anyways if enabled
+SYSTEM_STUFF += libebook
+SYSTEM_STUFF += libabw
+SYSTEM_STUFF += libpagemaker
+SYSTEM_STUFF += libzmf
+SYSTEM_STUFF += libstaroffice
+SYSTEM_STUFF += libqxp
+ENABLE_ZXING=y
+SYSTEM_STUFF += zxing
+BUILD_CAIROCANVAS=y
+SYSTEM_STUFF += cairo
+ifeq "$(ENABLE_GUI)" "y"
+BUILD_PLASMA=y
+ENABLE_QT5=n
+QT5_MINVER= (>= 5.6)
+endif
+ifeq "$(BUILD_PLASMA)" "y"
+ ENABLE_KF5=y
+ # KF5 depends on Qt5
+ ifeq "$(ENABLE_KF5)" "y"
+ ENABLE_QT5=y
+ KF5_QT5_DEPENDS := libreoffice-qt5 (= $${binary:Version})
+ endif
+endif
+ENABLE_QT6=n
+# for moc move to /usr/lib/qt6/libxexec
+QT6_MINVER= (>= 6.2.1+dfsg-2)
+# https://www.debian.org/doc/debian-policy/ says this is not defined and must
+# be ignored, but dh_strip mentions (and honours) it, so...
+ifneq (noautodbgsym,$(findstring noautodbgsym,$(DEB_BUILD_OPTIONS)))
+BUILD_DBGSYM_PACKAGES=y
+ifeq "$(DEB_HOST_ARCH)" "amd64"
+USE_DWZ=y
+DWZ_ARGS:=-L 100000000
+endif
+endif
+SYSTEM_STUFF += xmlsec
+
+ifeq ($(filter noinsttest,$(DEB_BUILD_PROFILES)),)
+ # this changes the packages built/contents of packages (-subsequentcheckbase)
+ # This is not exactly allowed in https://wiki.debian.org/BuildProfileSpec#Registered_profile_names
+ # but it doesn't have real practical difference, does it?
+ ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ BUILD_TEST_PACKAGES=y
+ endif
+endif
+
+ifneq ($(MAKECMDGOALS),build-indep)
+ENABLE_SYMBOLS=y
+SMALL_SYMBOLS=y
+endif
+ifeq ($(MAKECMDGOALS),build-indep)
+# no need to do a double build...
+BUILD_NOGUI_PACKAGES=n
+# go sure
+ ifeq "$(BUILD_TEST_PACKAGES)" "y"
+ ENABLE_JUNIT4=y
+ endif
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ SYSTEM_STUFF += beanshell
+ SYSTEM_STUFF += hsqldb
+endif
+SYSTEM_STUFF += lpsolve
+USE_SHARED_LPSOLVE=y
+LPSOLVE_MIN_VERSION= (>= 5.5.0.13-5+b1)
+ENABLE_COINMP=y
+SYSTEM_STUFF += coinmp
+USE_DBUS=y
+ifeq "$(USE_DBUS)" "y"
+ ifeq (,$(findstring linux,$(DEB_HOST_ARCH_OS)))
+ ENABLE_BLUETOOTH=n
+ else
+ ENABLE_BLUETOOTH=y
+ SYSTEM_STUFF += bluez
+ endif
+ ENABLE_PACKAGEKIT=n
+endif
+ENABLE_AVAHI=y
+ifeq "$(ENABLE_GUI)" "y"
+USE_GSTREAMER=y
+endif
+ENABLE_CURL=y
+CURL_SECTYPE=gnutls
+ENABLE_WEBDAV=y
+ifeq "$(ENABLE_WEBDAV)" "y"
+ ENABLE_CURL=y
+endif
+ifeq "$(ENABLE_CURL)" "y"
+SYSTEM_STUFF += curl
+endif
+SYSTEM_STUFF += redland
+PACKAGE_SDK=y
+ifneq ($(filter nodoc,$(DEB_BUILD_PROFILES)),)
+PACKAGE_SDK_DOCS=n
+else
+PACKAGE_SDK_DOCS=y
+endif
+PACKAGE_LOKIT=y
+ENABLE_CHART_TESTS=n
+# will not work, uses schema/ stripped in the tarballs
+ifeq "$(USE_SOURCE_TARBALLS)" "y"
+ENABLE_EXPORT_VALIDATION_TESTS=n
+endif
+JUNIT_MIN_VER= (>= 4.8.2-2)
+USE_LIBSUITESPARSE=y
+SUITESPARSE_MIN_VERSION= (>= 1:3.4.0)
+PARALLEL_BUILD=y
+ENABLE_LDAP=y
+SYSTEM_STUFF += openldap
+SYSTEM_STUFF += epoxy
+ifeq "$(ENABLE_JAVA)" "y"
+ ENABLE_REPORTBUILDER=y
+ SYSTEM_STUFF += jfreereport
+ ENABLE_MEDIAWIKI=y
+ ENABLE_SCRIPT_PROVIDER_BSH=y
+ ENABLE_SCRIPT_PROVIDER_JS=y
+ ENABLE_NLPSOLVER=y
+else
+ ENABLE_REPORTBUILDER=n
+ ENABLE_MEDIAWIKI=n
+ ENABLE_SCRIPT_PROVIDER_BSH=n
+ ENABLE_SCRIPT_PROVIDER_JS=n
+ ENABLE_NLPSOLVER=n
+endif
+ENABLE_SDBC_POSTGRESQL=y
+ifeq "$(ENABLE_GUI)" "y"
+BUILD_GTK3=y
+ # introspection needs GTK3
+ ifeq "$(BUILD_GTK3)" "y"
+ ENABLE_INTROSPECTION=y
+ endif
+endif
+# DO NOT ENABLE. WILL NOT WORK.
+# as of 2021-11-29:
+# 14:41 < _rene_> caolanm: just wondering after I did a testbuild lately on (then) master: what is the state of gtk4? enable-able (even
+# though there's no desktop actually using it ttbomk) or better wait?
+#[...]
+#14:45 <@caolanm> _rene_, I wouldn't enable it yet. There's too much basic stuff not working well enough yet, e.g.
+# https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/4124
+BUILD_GTK4=n
+ENABLE_EVO2=y
+ENABLE_GIO=y
+ENABLE_DCONF=y
+ENABLE_RANDR=y
+PACKAGE_BASE=y
+SYSTEM_STUFF += graphite
+SYSTEM_STUFF += harfbuzz
+SYSTEM_STUFF += libexttextcat
+SYSTEM_STUFF += cppunit
+SYSTEM_STUFF += dragonbox
+SYSTEM_STUFF += libfixmath
+DEFAULT_IMAGE=colibre
+IMAGES:=$(DEFAULT_IMAGE) colibre_dark colibre_svg colibre_dark_svg sifr sifr_dark sifr_dark_svg breeze breeze_dark breeze_dark_svg breeze_svg elementary elementary_svg karasa_jaga sukapura sukapura_svg
+# FIXME
+IMAGES_PACKAGES=$(subst _,-,$(filter-out colibre_svg,$(filter-out colibre_svg,$(filter-out colibre_dark_svg,$(filter-out sukapura_svg,$(filter-out sifr_dark_svg,$(filter-out breeze_dark_svg,$(filter-out sifr_dark,$(filter-out breeze_dark,$(filter-out breeze_svg,$(filter-out elementary_svg,$(IMAGES))))))))))))
+CONFIGURE_FLAGS_INDEP += --with-theme="$(IMAGES)"
+ENABLE_MARIADB=y
+ifeq "$(ENABLE_MARIADB)" "y"
+# FIXME: the mysql test doesn't get really tested since it is only ran/built
+# with CONNECTIVITY_TEST_MYSQL_DRIVER set - and doesn't build on 32bit... The
+# test is run in autopkgtest on OOO_CHECK_FATAL_ARCHS (aka 64bit archs!) only for
+# now anyway so let's just hack around here for now and disable the build of it
+# alltogether when not used and just set CONNECTIVITY_TEST_MYSQL_DRIVER on those
+# OOO_CHECK_FATAL_ARCHS
+ ifeq ($(DEB_HOST_ARCH),$(filter $(DEB_HOST_ARCH),$(OOO_CHECK_FATAL_ARCHS)))
+export CONNECTIVITY_TEST_MYSQL_DRIVER=dummy
+ endif
+endif
+ MYSQL_FLAVOUR=mariadb
+# set this also to y for system-mysql..
+SYSTEM_STUFF += mariadb
+SYSTEM_STUFF += postgresql
+DICT_DIR=/usr/share/hunspell
+HYPH_DIR=/usr/share/hyphen
+THES_DIR=/usr/share/mythes
+ENABLE_LIBCMIS=n
+ifeq "$(ENABLE_LIBCMIS)" "y"
+SYSTEM_STUFF += libcmis
+endif
+SYSTEM_STUFF += jpeg
+SYSTEM_STUFF += libxml
+SYSTEM_STUFF += expat
+SYSTEM_STUFF += odbc
+SYSTEM_STUFF += sane
+ENABLE_PDFIMPORT=y
+ENABLE_POPPLER=y
+SYSTEM_STUFF += poppler
+ENABLE_PDFIUM=y
+ifneq (big,$(DEB_HOST_ARCH_ENDIAN))
+ENABLE_SKIA=y
+endif
+# see https://cgit.freedesktop.org/libreoffice/core/commit/?id=a0edcc68f94915a78fcc08e70d2cdd752abd9ebb
+ifeq "$(ENABLE_SKIA)" "y"
+ BUILD_DEPS += , libfreetype-dev (>= 2.8.1)
+else
+ BUILD_DEPS += , libfreetype-dev (>= 2.2.0)
+endif
+SYSTEM_STUFF += libpng
+ENABLE_NSS=y
+ifeq "$(ENABLE_NSS)" "y"
+SYSTEM_STUFF += nss
+endif
+ENABLE_HELP=y
+ifeq "$(ENABLE_HELP)" "y"
+ ENABLE_HTML_HELP=y
+ ENABLE_XMLHELP=y
+ ifeq "$(ENABLE_HTML_HELP)" "y"
+ HELP_DEPENDS := libreoffice-help-common (= $${binary:Version}),
+ HELP_RECOMMENDS := firefox-esr | epiphany-browser | konqueror | chromium | firefox
+ HELP_COMMON_DEPENDS := node-normalize.css
+ BUILD_DEPS_INDEP += , node-normalize.css
+ else
+ HELP_DEPENDS := libreoffice-writer
+ DEBHELPER_OPTIONS += -Nlibreoffice-help-common
+ endif
+ ifeq "$(ENABLE_XMLHELP)" "y"
+ SYSTEM_STUFF += clucene
+ endif
+endif
+SYSTEM_STUFF += lcms2
+SYSTEM_STUFF += liblangtag
+SYSTEM_STUFF += orcus
+USE_UCPP=n
+ifeq "$(USE_UCPP)" "y"
+ SYSTEM_STUFF += ucpp
+else
+ CONFIGURE_FLAGS += --with-idlc-cpp=cpp
+endif
+# kfreebsd runs into SIZE_MAX problems, and the rest might
+# get OOM (mips(el)...) so enable mergelibs only for 64bit
+# archs
+ifeq (,$(filter kfreebsd,$(DEB_HOST_ARCH)))
+ ifeq "$(DEB_HOST_ARCH_BITS)" "64"
+ ENABLE_MERGELIBS=y
+ endif
+endif
+ifeq "$(ENABLE_MERGELIBS)" "y"
+ ENABLE_LTO=y
+else
+ ENABLE_LTO=n
+endif
+USE_OPENCL=y
+ENABLE_FIREBIRD=y
+ifeq "$(ENABLE_FIREBIRD)" "y"
+ SYSTEM_STUFF += firebird
+ ifeq (,$(filter firebird, $(SYSTEM_STUFF)))
+ SYSTEM_STUFF += libatomic-ops
+ SYSTEM_STUFF += libtommath
+ endif
+endif
+ENABLE_EOT=y
+ifeq "$(ENABLE_EOT)" "y"
+SYSTEM_STUFF += libeot
+endif
+SYSTEM_STUFF += glm
+BUILD_PPC64EL=y
+BUILD_ARM64=y
+SYSTEM_STUFF += gpgmepp
+INSTALL_APPARMOR_PROFILES=y
+ENABLE_APPARMOR_PROFILES=y
+ifneq "$(AUTOPKGTEST_BUILD)" "y"
+ CHECK_APPARMOR_PROFILES=true
+endif
+SYSTEM_STUFF += libnumbertext
+SYSTEM_STUFF += box2d
+SYSTEM_STUFF += libwebp
+SYSTEM_STUFF += libtiff
+
+# Default flags to pass to configure
+CONFIGURE_FLAGS+= \
+ --with-vendor='$(OOO_VENDOR)' \
+ --with-extra-buildid='$(DEB_VENDOR) package version: $(BINARY_VERSION)' \
+ --prefix=/usr --mandir=/usr/share/man \
+ --docdir=/usr/share/doc/libreoffice \
+ --libdir=/usr/lib \
+ --bindir=/usr/bin \
+ --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \
+ --disable-online-update \
+ --disable-fetch-external \
+ --without-fonts --enable-build-opensymbol \
+ --without-myspell-dicts \
+ --with-branding=$(CURDIR)/debian/branding
+
+ifeq "$(ENABLE_GUI)" "y"
+BUILD_DEPS += ,\
+ libcups2-dev,\
+ libgl-dev,\
+ libice-dev,\
+ libsm-dev,\
+ libx11-dev,\
+ libx11-xcb-dev, \
+ libxaw7-dev,\
+ libxext-dev,\
+ libxinerama-dev,\
+ libxkbfile-dev,\
+ libxrender-dev,\
+ libxt-dev,\
+ libxtst-dev,\
+ x11proto-render-dev
+endif
+
+ifeq "$(ENABLE_HELP)" "y"
+CONFIGURE_FLAGS_INDEP+= --with-help
+ ifeq "$(ENABLE_HTML_HELP)" "y"
+ CONFIGURE_FLAGS_INDEP+= --with-help=html
+ endif
+ ifneq "$(ENABLE_XMLHELP)" "y"
+ CONFIGURE_FLAGS += --disable-xmlhelp
+ endif
+else
+ CONFIGURE_FLAGS += --without-helppack-integration --without-help
+endif
+
+
+ifeq "$(shell echo $(DEB_VERSION_UPSTREAM) | grep -E '(alpha|beta)'; echo $$?)" "1"
+CONFIGURE_FLAGS += --enable-release-build
+RELEASE_BUILD := y
+endif
+
+ifeq "$(DEB_DISTRIBUTION)" "UNRELEASED"
+BUGS=mailto:debian-openoffice@lists.debian.org
+endif
+
+ifneq (terse,$(findstring terse,$(DEB_BUILD_OPTIONS)))
+export verbose=t
+endif
+
+#############
+# Architecture-specific changes
+
+# helper to generate no_archs macros (pass name of source macro)
+define gen_no_archs
+ _no_arch_macro = $(subst OOO_,OOO_NO_,$1)
+ _no_arch_tmp_$1 = $$(foreach _a,$$(filter-out $$(call $1),$(OOO_ARCHS)),!$$(_a))
+ $$(_no_arch_macro) = $$(if $$(_no_arch_tmp_$1),$$(_empty) [$$(_no_arch_tmp_$1)])
+endef
+
+PLATFORMID := $(shell grep PLATFORMID debian/vars.$(DEB_HOST_ARCH) | cut -d"=" -f2)
+RTL_OS := $(shell grep RTL_OS debian/vars.$(DEB_HOST_ARCH) | cut -d"=" -f2)
+RTL_ARCH := $(shell grep RTL_ARCH debian/vars.$(DEB_HOST_ARCH) | cut -d"=" -f2)
+
+OOO_64BIT_ARCHS = $(filter alpha amd64 arm64 ia64 kfreebsd-amd64 mips64 mips64el ppc64 ppc64el s390x sparc64, $(OOO_ARCHS))
+$(eval $(call gen_no_archs,OOO_64BIT_ARCHS))
+OOO_BE_ARCHS = $(filter hppa m68k mips mips64 powerpc powerpcspe ppc64 s390 s390x sparc sparc64,$(OOO_ARCHS))
+OOO_LE_ARCHS = $(filter-out $(OOO_BE_ARCHS),$(OOO_ARCHS))
+$(eval $(call gen_no_archs,OOO_LE_ARCHS))
+
+OOO_CHECK_ARCHS := $(filter-out kfreebsd-i386 kfreebsd-amd64 mips mipsel mips64el armel s390x,$(OOO_ARCHS))
+$(eval $(call gen_no_archs,OOO_CHECK_ARCHS))
+#OOO_JUNIT_ARCHS := i386 amd64 armhf arm64
+OOO_JUNIT_ARCHS := amd64 arm64
+$(eval $(call gen_no_archs,OOO_JUNIT_ARCHS))
+#OOO_CHECK_FATAL_ARCHS := i386 amd64 armhf arm64
+OOO_CHECK_FATAL_ARCHS := amd64 arm64
+
+BUILD_TESTS=y
+ifeq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ BUILD_TESTS=n
+endif
+
+RUN_MAKE_CHECK=n
+ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ ifeq ($(DEB_HOST_ARCH),$(filter $(DEB_HOST_ARCH),$(OOO_CHECK_ARCHS)))
+ RUN_MAKE_CHECK=y
+ endif
+ ifeq "$(ENABLE_JAVA)" "y"
+ ifeq ($(DEB_HOST_ARCH),$(filter $(DEB_HOST_ARCH),$(OOO_JUNIT_ARCHS)))
+ ENABLE_JUNIT4=y
+ endif
+ endif
+ IGNORE_MAKE_CHECK_FAILURES=-
+ TEST_TIMEOUT := timeout --foreground --preserve-status -v -k 250m 200m
+ ifeq ($(DEB_HOST_ARCH),$(filter $(DEB_HOST_ARCH),$(OOO_CHECK_FATAL_ARCHS)))
+ IGNORE_MAKE_CHECK_FAILURES:=
+ TEST_TIMEOUT:=
+ endif
+endif
+ifeq "$(RUN_MAKE_CHECK)" "y"
+ BUILD_TESTS=y
+else
+ BUILD_TESTS=n
+endif
+
+# Java...
+# upstream says --source=1.8 / --target=1.8 so 1.8 is fine in runtime
+JAVA_RUNTIME_BASELINE=8
+ifeq "$(JDK)" "default"
+OOO_JAVA_ARCHS = $(filter $(OOO_ARCHS),$(java$(JAVA_RUNTIME_BASELINE)_architectures))
+else
+OOO_JAVA_ARCHS = $(OOO_ARCHS)
+endif
+$(eval $(call gen_no_archs,OOO_JAVA_ARCHS))
+
+OOO_ARCH_DEP_EXTENSIONS_ARCHS := $(OOO_ARCHS)
+OOO_EXTENSIONS_ARCHS := $(OOO_ARCH_DEP_EXTENSIONS_ARCHS)
+
+OOO_BASE_ARCHS := $(OOO_JAVA_ARCHS)
+$(eval $(call gen_no_archs,OOO_BASE_ARCHS))
+OOO_REPORTBUILDER_ARCHS := $(OOO_BASE_ARCHS)
+$(eval $(call gen_no_archs,OOO_REPORTBUILDER_ARCHS))
+OOO_FIREBIRD_ARCHS := $(OOO_BASE_ARCHS)
+$(eval $(call gen_no_archs,OOO_FIREBIRD_ARCHS))
+OOO_NOGUI_ARCHS := $(filter amd64 i386 arm64 armhf s390x ppc64 ppc64el,$(OOO_ARCHS))
+$(eval $(call gen_no_archs,OOO_NOGUI_ARCHS))
+
+ifneq (,$(filter $(DEB_HOST_ARCH),$(OOO_NO_BASE_ARCHS)))
+ ifneq ($(DEB_HOST_ARCH),$(filter $(DEB_HOST_ARCH),$(OOO_BASE_ARCHS)))
+ PACKAGE_BASE=n
+ ENABLE_SDBC_POSTGRESQL=n
+ ENABLE_EVO2=n
+ ENABLE_REPORTBUILDER=n
+ DEBHELPER_OPTIONS += -Nlibreoffice-base libreoffice-base-core -Nlibreoffice-base-drivers
+ DEBHELPER_OPTIONS += -Nlibreoffice-evolution
+ DEBHELPER_OPTIONS += -Nlibreoffice-sdbc-postgresql -Nlibreoffice-sdbc-mysql
+ DEBHELPER_OPTIONS += -Nlibreoffice-sdbc-hsqldb -Nlibreoffice-sdbc-firebird
+ DEBHELPER_OPTIONS += -Nlibreoffice-report-builder-bin -Nlibreoffice-report-builder
+ DEBHELPER_OPTIONS += -Npython3-access2base
+# CONFIGURE_FLAGS += --disable-database-connectivity
+ endif
+endif
+
+ifeq (,$(filter $(DEB_HOST_ARCH),$(OOO_EXTENSIONS_ARCHS)))
+ ENABLE_MEDIAWIKI=n
+ ENABLE_NLPSOLVER=n
+ DEBHELPER_OPTIONS += -Nlibreoffice-wiki-publisher -Nlibreoffice-script-provider-python -Nlibreoffice-nlpsolver
+ CONFIGURE_FLAGS += --disable-extension-integration --disable-extensions
+endif
+
+ifeq (,$(filter $(DEB_HOST_ARCH),$(OOO_JAVA_ARCHS)))
+ ENABLE_JAVA=n
+ ENABLE_REPORTBUILDER=n
+ ENABLE_MEDIAWIKI=n
+ ENABLE_NLPSOLVER=n
+endif
+
+ifneq "$(BUILD_TEST_PACKAGES)" "y"
+ DEBHELPER_OPTIONS += -Nlibreoffice-subsequentcheckbase -Nlibreoffice-smoketest-data
+else
+ BUILD_DEPS_INDEP += , junit4 $(JUNIT_MIN_VER) <!nojava>
+endif
+
+ifeq "$(ENABLE_GUI)" "y"
+ ifeq ($(DEB_HOST_ARCH),$(filter $(DEB_HOST_ARCH),$(OOO_NOGUI_ARCHS)))
+ BUILD_NOGUI_PACKAGES=y
+ endif
+else
+CONFIGURE_FLAGS += --disable-gui
+DEBHELPER_OPTIONS += -Nlibreoffice-core -Nlibreoffice-calc -Nlibreoffice-writer -Nlibreoffice-draw -Nlibreoffice-report-builder-bin -Nlibreoffice-base -Nlibreoffice-impress -Nlibreoffice-math
+endif
+ifneq "$(BUILD_NOGUI_PACKAGES)" "y"
+DEBHELPER_OPTIONS += -Nlibreoffice-core-nogui -Nlibreoffice-calc-nogui -Nlibreoffice-writer-nogui -Nlibreoffice-draw-nogui -Nlibreoffice-report-builder-bin-nogui -Nlibreoffice-base-nogui -Nlibreoffice-impress-nogui -Nlibreoffice-math-nogui
+endif
+
+ifeq "$(AUTOPKGTEST_BUILD)" "y"
+# as above (for build-indep), no need to do two builds here...
+# needs to be here since there is arch-specific rules before
+BUILD_NOGUI_PACKAGES=n
+# go sure
+BUILD_TESTS=y
+BUILD_TEST_PACKAGES=y
+ENABLE_JUNIT4=y
+endif
+
+#############
+# Distro-specific overrides
+
+# Debian Bullseye
+ifeq "$(DEB_DISTRIBUTION)" "bullseye-backports"
+ BUGS=mailto:debian-backports@lists.debian.org
+ SYSTEM_STUFF := $(filter-out zxing mdds orcus libnumbertext dragonbox libfixmath libmwaw,$(SYSTEM_STUFF))
+ BULLSEYE_BACKPORT=y
+ ENABLE_LTO=n
+endif
+
+CONFIGURE_FLAGS += $(foreach i, $(SYSTEM_STUFF),--with-system-$(i))
+
+CC_PREFIX:=$(shell gcc -dumpmachine)-
+
+# generally use clang
+USE_CLANG=n
+# allow clang for skia?
+ALLOW_CLANG=y
+
+CLANG_VERSION=default
+
+ifneq "$(shell echo $(USE_CLANG)$(ALLOW_CLANG) | grep y)" ""
+ # /usr/bin/ld: /usr/lib/llvm-11/bin/../lib/LLVMgold.so: error loading plugin: /usr/lib/llvm-11/bin/../lib/LLVMgold.so: cannot open shared object file: No such file or directory
+ # for mips64el that doesn't exist so disable LTO there...
+ ifeq "$(ENABLE_LTO)" "y"
+ ifeq "$(DEB_HOST_ARCH)" "mips64el"
+ ENABLE_LTO=n
+ endif
+ BUILD_DEPS += , clang (>= 1:12) [ppc64el]
+ # since the llvm-defaults packages pointing to llvm 13(?) it apparently doesn't
+ # automatically pull in llvm-xx-linker-tools anymore which contains the needed LLVMgold.so
+ # (see above).
+ # So build-depend on llvm, too.
+ # We shouldn't depend on llvm-xx-linker-tools since this probably should be
+ # version-agnostic when the default changes (unless explicitely specified of course).
+ ifeq "$(USE_CLANG)" "y"
+ ifeq "$(CLANG_VERSION)" "default"
+ BUILD_DEPS += , llvm
+ else
+ BUILD_DEPS += , llvm-$(CLANG_VERSION)-linker-tools
+ endif
+ else
+ ifeq "$(ALLOW_CLANG)" "y"
+ ifeq "$(CLANG_VERSION)" "default"
+ BUILD_DEPS += , llvm [$(OOO_LE_ARCHS)]
+ else
+ BUILD_DEPS += , llvm-$(CLANG_VERSION)-linker-tools [$(OOO_LE_ARCHS)]
+ endif
+ endif
+ endif
+ endif
+endif
+ifeq "$(USE_DWZ)" "y"
+ # dwz errors out with
+ # dwz: debian/libreoffice-core/usr/lib/libreoffice/program/libskialo.so: Unknown debugging section .debug_addr
+ # since clang 14
+ ifeq "$(USE_CLANG)" "y"
+ USE_DWZ := n
+ endif
+ ifeq "$(ENABLE_SKIA)" "y"
+ ifneq "$(shell echo $(ALLOW_CLANG) | grep y)" ""
+ ifeq "$(shell dpkg --compare-versions $(SYSTEM_CLANG_VERSION) ge 14 && echo true)" "true"
+ DH_DWZ_ARGS += -Xskia
+ endif
+ endif
+ endif
+endif
+
+ifeq "$(USE_CLANG)" "y"
+ ENABLE_COMPILER_PLUGINS=n
+endif
+
+ifneq "$(USE_CLANG)" "y"
+ ifneq "$(GCC_VERSION)" ""
+ ifneq "$(SYSTEM_GCC_VERSION)" "$(GCC_VERSION)"
+ BUILD_DEPS += , gcc-$(GCC_VERSION), g++-$(GCC_VERSION)
+ CONFIGURE_FLAGS+= \
+ CC=$(CC_PREFIX)gcc-$(GCC_VERSION) \
+ CXX=$(CC_PREFIX)g++-$(GCC_VERSION)
+ endif
+ endif
+ BUILD_DEPS += , gcc (>= 4:7), g++ (>= 4:7)
+ # Use -O0 for gcc 10 on armhf to avoid build/test failure with gcc 10
+ # https://bugs.launchpad.net/ubuntu/+bug/1891623
+ # In Debian this never appeared to be an actual build failure but
+ # this also helps for the test timeout on armv8 machines/buildds.
+ # (armv7 "works"). So make it conditional on whether we run checks.
+ # With g++-10 there also appear SIGSEGVs in/with openjdk-11 and it
+ # hangs at RunMacros, which also tries to use Java "Macros".
+ # A --without-java build passes.
+ifeq "$(DEB_HOST_ARCH)" "armhf"
+ ifeq ($(ENABLE_JAVA),y)
+ ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ ifneq (noopt,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ DEB_BUILD_OPTIONS += noopt
+ endif
+ endif
+ endif
+endif
+ # and also on s390x since it otherwise gets miscompiled.
+ # Upstream tacked it down to a gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106355
+ # but
+ # 16:37 <@sberg> _rene_, I couldn't reproduce the issue with an -O0 (--enable-dbgutil) build, and can with a -O2 (no --enable-debug etc.) one
+ifeq "$(DEB_HOST_ARCH)" "s390x"
+ ifneq (noopt,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ DEB_BUILD_OPTIONS += noopt
+ endif
+endif
+ # skia build picks up clang if present (for performance reasons,
+ # at least on Windows...). See the thread starting at
+ # https://lists.freedesktop.org/archives/libreoffice/2020-April/084929.html
+ # Make it a explicit build-dependency so we don't have builds
+ # "randomly" using gcc or clang depending on whether clang is installed
+ # or not
+ ifeq "$(ENABLE_SKIA)" "y"
+ ifeq "$(ALLOW_CLANG)" "y"
+ ifeq (ccache,$(findstring ccache,$(DEB_BUILD_OPTIONS)))
+ export CCACHE_CPP2=1
+ endif
+ ifeq "$(CLANG_VERSION)" "default"
+ export LO_CLANG_CC=clang
+ export LO_CLANG_CXX=clang++
+ BUILD_DEPS += , clang (>= 1:8.0.1) [$(filter-out armel ppc64el,$(OOO_LE_ARCHS))]
+ # see #963162, #963167 which apparently don't exist on 11
+ BUILD_DEPS += , clang (>= 1:11) [armel]
+ else
+ export LO_CLANG_CC=clang-$(CLANG_VERSION)
+ export LO_CLANG_CXX=clang++-$(CLANG_VERSION)
+ BUILD_DEPS += , clang-$(CLANG_VERSION) [$(OOO_LE_ARCHS)]
+ endif
+ endif
+ endif
+else
+ ifeq "$(CLANG_VERSION)" "default"
+ BUILD_DEPS += , clang (>= 1:8.0.1)
+ CONFIGURE_FLAGS+= CC=clang CXX=clang++
+ else
+ BUILD_DEPS += , clang-$(CLANG_VERSION)
+ CONFIGURE_FLAGS+= CC=clang-$(CLANG_VERSION) CXX=clang++-$(CLANG_VERSION)
+ endif
+ ifeq "$(ENABLE_COMPILER_PLUGINS)" "y"
+ CONFIGURE_FLAGS += --enable-compiler-plugins
+ CLANGDIR := /usr/lib/llvm-$(shell $(CLANG) --version | head -n 1 | awk '{ print $$3 }' | cut -d. -f1)
+ ifeq "$(CLANG_VERSION)" "default"
+ BUILD_DEPS += , clang (>= 1:12.0.1), libclang-dev (>= 1:12.0.1), llvm-dev (>= 1:12.0.1)
+ else
+ BUILD_DEPS += , libclang-$(CLANG_VERSION)-dev, llvm-$(CLANG_VERSION)-dev
+ endif
+ endif
+endif
+USE_GOLD=n
+ALLOW_GOLD=n
+# leaves cruft around after building because it runs update_pch.sh..
+ENABLE_PCH=n
+
+ifeq "$(USE_DWZ)" "y"
+ BUILD_DEPS += , debhelper (>= 10.10.4)
+ # dwz 0.12-3 claims to have DW_OP_GNU support but still
+ # dwz: debian/libreoffice-core/usr/lib/libreoffice/program/libmergedlo.so: Couldn't find DIE referenced by DW_OP_GNU_parameter_ref
+ # happens
+ BUILD_DEPS += , dwz (>> 0.12-3)
+endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ CONFIGURE_FLAGS += --enable-odk
+ ifeq "$(PACKAGE_SDK_DOCS)" "y"
+ BUILD_DEPS_INDEP += , doxygen (>= 1.8.4) <!nodoc>, graphviz <!nodoc>
+ else
+ CONFIGURE_FLAGS += --without-doxygen --without-javadoc
+ endif
+endif
+
+ifeq "$(ENABLE_PDFIMPORT)" "y"
+ ifeq "$(ENABLE_POPPLER)" "y"
+ BUILD_DEPS += , libpoppler-dev (>= 0.14.0), libpoppler-private-dev, libpoppler-cpp-dev
+ BUILD_DEPS_ARCH += , poppler-data$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ else
+ CONFIGURE_FLAGS += --disable-poppler
+ endif
+ ifeq "$(ENABLE_PDFIUM)" "n"
+ CONFIGURE_FLAGS += --disable-pdfium
+ else
+ SYSTEM_STUFF += abseil
+ SYSTEM_STUFF += openjpeg
+ ifneq (,$(filter openjpeg, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libopenjp2-7-dev
+ endif
+ ifneq (,$(filter abseil, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libabsl-dev
+ endif
+ endif
+endif
+
+ifneq (,$(filter graphite, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libgraphite2-dev (>= 0.9.3)
+endif
+
+ifneq (,$(filter harfbuzz, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libharfbuzz-dev (>= 2.1.0)
+endif
+
+ifneq (,$(filter libexttextcat, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libexttextcat-dev (>= 3.4.1)
+ TEXTCAT_DATA_RECOMMENDS := libexttextcat-data
+endif
+
+ifneq "$(ENABLE_LDAP)" "y"
+ CONFIGURE_FLAGS += --disable-ldap
+endif
+
+ifneq (,$(filter libnumbertext, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libnumbertext-dev (>= 1.0.6)
+ # https://cgit.freedesktop.org/libreoffice/core/commit/?h=libreoffice-7-3&id=09dfe214a30f58ddcd7a857db8f5eee68d4cef2a
+ BUILD_DEPS_ARCH += , libnumbertext-data (>= 1.0.11) <!nocheck>
+ NUMBERTEXT_DATA_RECOMMENDS := libnumbertext-data
+endif
+
+ifneq (,$(filter jpeg, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libjpeg-dev
+endif
+ifneq (,$(filter libxml, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libxml2-dev (>= 2.8), libxml2-utils
+ BUILD_DEPS += , libxslt1-dev
+else
+ CONFIGURE_FLAGS += --without-system-libxml
+endif
+ifneq (,$(filter xmlsec, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libxmlsec1-dev (>= 1.2.28)
+endif
+ifneq (,$(filter expat, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libexpat1-dev
+endif
+ifneq (,$(filter odbc, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , unixodbc-dev (>= 2.2.11)
+endif
+ifneq (,$(filter sane, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libsane-dev
+endif
+ifneq (,$(filter libpng, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libpng-dev (>= 1.6)
+endif
+
+ifeq "$(ENABLE_CURL)" "y"
+ ifneq (,$(filter curl, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libcurl4-$(CURL_SECTYPE)-dev (>= 7.68)
+ endif
+else
+ CONFIGURE_FLAGS += --disable-curl
+endif
+
+ifneq (,$(filter box2d, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libbox2d-dev
+endif
+
+ifneq (,$(filter libwebp, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libwebp-dev
+endif
+
+ifneq (,$(filter libtiff, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libtiff-dev
+endif
+
+COINMP_MINVER=(>= 1.7.6+dfsg1-2)
+ COINUTILS_MINVER=(>= 2.10.14+repack1-1~)
+ # go sure given #873362
+ COINMP_MINVER=(>= 1.8.3-3)
+ifneq ($(ENABLE_COINMP),y)
+ CONFIGURE_FLAGS += --disable-coinmp
+else
+ ifneq (,$(filter coinmp, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , coinor-libcoinmp-dev $(COINMP_MINVER), coinor-libcoinutils-dev $(COINUTILS_MINVER)
+ endif
+endif
+
+ifneq (,$(filter amd64,$(DEB_HOST_ARCH)))
+ ifneq "$(AUTOPKGTEST_BUILD)" "y"
+ SMALL_SYMBOLS = n
+ endif
+endif
+
+# silence long-obsolete warnings. Should probably be in
+# upstreams makefiles but I failed to get it actually appear...
+ifeq "$(DEB_HOST_ARCH)" "armel"
+ DEB_CXXFLAGS_MAINT_APPEND = -Wno-psabi
+endif
+ifeq "$(DEB_HOST_ARCH)" "armhf"
+ DEB_CXXFLAGS_MAINT_APPEND = -Wno-psabi
+endif
+
+ifeq "$(ENABLE_SYMBOLS)" "y"
+ # Small symbols?
+ ifeq "$(SMALL_SYMBOLS)" "y"
+ CONFIGURE_FLAGS += --enable-symbols=SMALL
+ DEB_CFLAGS_MAINT_STRIP += -g
+ DEB_CXXFLAGS_MAINT_STRIP += -g
+ DEB_CFLAGS_MAINT_PREPEND += -g1
+ DEB_CXXFLAGS_MAINT_PREPEND += -g1
+export DEB_CFLAGS_MAINT_STRIP DEB_CXXFLAGS_MAINT_STRIP
+export DEB_CFLAGS_MAINT_PREPEND DEB_CXXFLAGS_MAINT_PREPEND
+ else
+ CONFIGURE_FLAGS += --enable-symbols
+ endif
+else
+ DEB_CFLAGS_MAINT_STRIP := -g
+ DEB_CXXFLAGS_MAINT_STRIP := -g
+export DEB_CFLAGS_MAINT_STRIP DEB_CXXFLAGS_MAINT_STRIP
+endif
+export DPKG_EXPORT_BUILDFLAGS=y
+include /usr/share/dpkg/buildflags.mk
+ifeq (debug,$(findstring debug,$(DEB_BUILD_OPTIONS)))
+ CONFIGURE_FLAGS += --enable-debug
+endif
+ifeq (noopt,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ CONFIGURE_FLAGS += --disable-optimized
+endif
+
+ifeq "$(ENABLE_PYTHON)" "y"
+PYMAJOR:=$(shell $(PYTHON) -c "import sys; print (sys.version_info[0])")
+PYMINOR:=$(shell $(PYTHON) -c "import sys; print (sys.version_info[1])")
+PYMINORPLUS1:=$(shell $(PYTHON) -c "import sys; print (sys.version_info[1]+1)")
+PYTHON_SITE:=debian/python3-uno/$(shell $(PYTHON) -c 'from distutils import sysconfig; print(sysconfig.get_python_lib())')
+endif
+
+ BUILD_DEPS += , $(PYTHON)
+ifeq "$(ENABLE_PYTHON)" "y"
+ BUILD_DEPS += , $(PYTHON)-dev (>= 3.3) <!nopython>
+ BUILD_DEPS += , $(PYTHON)-distutils <!nopython>
+ BUILD_DEPS += , dh-python <!nopython>
+ ifeq "$(RUN_MAKE_CHECK)" "y"
+ ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ BUILD_DEPS_ARCH += , $(PYTHON)-lxml$(OOO_NO_CHECK_ARCHS) <!nocheck !nopython>
+ else
+ CONFIGURE_FLAGS += --without-lxml
+ endif
+ endif
+endif
+
+ BUILD_DEPS += , debhelper-compat (= 12)
+ BUILD_DEPS += , dpkg-dev (>= 1.20.1)
+
+ ifeq "$(RUN_MAKE_CHECK)" "y"
+ BUILD_DEPS_ARCH += , locales$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS_ARCH += , gdb$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS_ARCH += , fontconfig$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS_ARCH += , fonts-liberation2$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS_ARCH += , fonts-crosextra-carlito$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ # https://lists.freedesktop.org/archives/libreoffice/2017-May/077764.html
+ BUILD_DEPS_ARCH += , fonts-dejavu$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ # used in vcl/qa/cppunit/text.cxx:void VclTextTest::testImplLayoutArgs_PrepareFallback_precalculatedglyphs()
+ BUILD_DEPS_ARCH += , fonts-kacst$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ # sdext/source/pdfimport/test/tests.cxx (the test PDF uses NaskhArabic) and the result of the import is
+ # checked which fails without the font.
+ BUILD_DEPS_ARCH += , fonts-noto-core$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ # FIXME: Linux Libertine G (does fonts-linuxlibertine even contain it?, I don't see the _G files?)
+ # now is used in test documents.
+ # now we get a abort if fonts is not found and replaced in layout tests (even though
+ # https://cgit.freedesktop.org/libreoffice/core/commit/?id=172270a8f04388a8f8062f672f9c3f3144a01a1f suggests that
+ # it isn't the case in --without-fonts) but... And while we disable that abort via patch having this
+ # to be sure there is no other failure mode makes sense (as with the other fonts above)
+ BUILD_DEPS_ARCH += , fonts-linuxlibertine$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ ifneq (,$(filter cppunit, $(SYSTEM_STUFF)))
+ BUILD_DEPS_ARCH += , libcppunit-dev (>= 1.14)$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ # without the deterministic order patch the xmlsecurity_signing test fails. See
+ # https://cgit.freedesktop.org/libreoffice/core/commit/external/cppunit/order.patch.0?id=2f2246d22e2a8ccbc1dc3e6f5243734a61edf270
+ ifeq "$(ENABLE_LTO)" "y"
+ BUILD_DEPS_ARCH += , libcppunit-dev (>= 1.15.1-4) [$(filter $(OOO_CHECK_ARCHS),$(OOO_64BIT_ARCHS))] <!nocheck>
+ endif
+ endif
+ # 17:35 <@sberg_> vmiklos, oh, what kind of poor test is that? "warn:sal.osl:3785:2:sal/osl/unx/process.cxx:344: ChildStatusProc : starting 'pstoedit' failed" etc. is what I see in workdir/CppunitTest/filter_eps_test.test.log...
+ BUILD_DEPS_ARCH += , pstoedit$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS_ARCH += , imagemagick$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS_ARCH += , ghostscript$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS_ARCH += , hunspell-en-us$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS_ARCH += , hyphen-en-us$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ # we don't run any cppunit check in all builds
+ ifneq "$(AUTOPKGTEST_BUILD)" "y"
+ ifeq ($(MAKECMDGOALS),build-indep)
+ CONFIGURE_FLAGS_INDEP += --without-cppunit
+ endif
+ endif
+ else
+ CONFIGURE_FLAGS += --without-cppunit
+ endif
+ ifeq "$(ENABLE_JUNIT4)" "y"
+ BUILD_DEPS += , junit4 $(JUNIT_MIN_VER) [$(OOO_JUNIT_ARCHS)] <!nocheck !nojava>
+ else
+ CONFIGURE_FLAGS += --without-junit
+ endif
+ ifeq "$(ENABLE_CHART_TESTS)" "y"
+ CONFIGURE_FLAGS += --enable-chart-tests
+ endif
+ ifeq "$(ENABLE_EXPORT_VALIDATION_TESTS)" "y"
+ BUILD_DEPS += , libofficeotron-java$(OOO_NO_CHECK_ARCHS) <!nocheck !nojava>, libodfvalidator-java$(OOO_NO_CHECK_ARCHS) <!nocheck !nojava>
+ else
+ CONFIGURE_FLAGS += --without-export-validation
+ endif
+ifneq "$(BUILD_ONLY_EN_US)" "y"
+ ifeq (lang=,$(findstring lang=,$(DEB_BUILD_OPTIONS)))
+ ISOS=$(shell echo "$(DEB_BUILD_OPTIONS) " | sed -n 's/^.*lang=\([^\s].*\)\s.*/\1/p' | awk '{ print $$1 }' | sed -e 's/,/ /g')
+ ifeq "$(ENABLE_HELP)" "n"
+ HELPISOS=
+ else
+ HELPISOS=$(shell echo "$(DEB_BUILD_OPTIONS) " | sed -n 's/^.*lang=\([^\s].*\)\s.*/\1/p' | awk '{ print $$1 }' | sed -e 's/,/ /g')
+ endif
+ LANGPACKISOS=$(shell echo "$(DEB_BUILD_OPTIONS) " | sed -n 's/^.*lang=\([^\s].*\)\s.*/\1/p' | awk '{ print $$1 }' | sed -e 's/,/ /g')
+ else
+ # Note that the first one here *has to be* en-US. the first one gets
+ # gid_Module_Root as filelist later and the rest gid_Module_Root.$iso
+ # but we can't/shouldn't do dynamic switching, so let en-US be the first
+ # one to that gid_Module_Root always is english and the other langpacks
+ # have gid_Module_Root.$iso
+ #ISOS=$(shell $(SOURCE_TREE)/bin/lo-xlate-lang -i all')
+ ISOS:=en-US af am ar as ast be bg bn br bs ca ca-valencia cs cy da de dz el \
+ en-GB en-ZA eo es et eu fa fi fr ga gd gl gu gug he hi hr hu id is it ja \
+ ka kk km kmr-Latn kn ko lt lv mk mn ml mr nb ne nl nn nr nso oc om or \
+ pa-IN pl pt pt-BR ro ru rw si sk sl sr sr-Latn ss st sv szl \
+ ta te tg th tn tr ts ug uk uz ve vi xh zh-CN zh-TW zu
+ ifeq "$(ENABLE_HELP)" "n"
+ HELPISOS:=
+ else
+ #HELPISOS:=$(shell $(SOURCE_TREE)/bin/lo-xlate-lang -i all')
+ HELPISOS:=en-US ca ca-valencia cs da de dz el en-GB es et eu fi fr gl hi hu id it \
+ ja km ko nl om pl pt pt-BR ru sk sl sv tr vi zh-CN zh-TW
+ endif
+ #LANGPACKISOS:=$(shell $(SOURCE_TREE)/bin/lo-xlate-lang -i all')
+ LANGPACKISOS:=en-US af am ar as ast be bg bn br bs ca ca-valencia cs cy da de dz el \
+ en-GB en-ZA eo es et eu fa fi fr ga gd gl gu gug he hi hr hu id is it ja \
+ ka kk km kmr-Latn kn ko lt lv mk mn ml mr nb ne nl nn nr nso oc om or \
+ pa-IN pl pt pt-BR ro ru rw si sk sl sr sr-Latn ss st sv szl \
+ ta te tg th tn tr ts ug uk uz ve vi xh zh-CN zh-TW zu
+ endif
+else
+ ISOS=en-US
+ ifeq "$(ENABLE_HELP)" "n"
+ HELPISOS=
+ else
+ HELPISOS=en-US
+ endif
+ LANGPACKISOS=en-US
+endif
+BUILD_ISOS = $(ISOS)
+
+ifneq "$(BUILD_ONLY_EN_US)" "y"
+ ifneq "$(BUILD_ISOS)" "en-US"
+ CONFIGURE_FLAGS_LANG += --with-lang="$(BUILD_ISOS)"
+ CONFIGURE_FLAGS_INDEP += $(CONFIGURE_FLAGS_LANG)
+ BUILD_DEPS_INDEP += , gettext
+ endif
+endif
+
+
+ifeq "$(ENABLE_HELP)" "y"
+ifeq "$(ENABLE_HTML_HELP)" "y"
+ ifneq "$(BULLSEYE_BACKPORT)" "y"
+ HELP_COMMON_DEPENDS += , node-prismjs
+ BUILD_DEPS_INDEP += , node-prismjs
+ endif
+ endif
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ BUILD_DEPS += , maven-repo-helper
+ ifeq "$(JDK)" "default"
+ JAVA_HOME=/usr/lib/jvm/default-java
+ BUILD_DEPS += , java-common (>= 0.61) <!nojava>
+ DEFAULT_JDK := $(call java_dependency, default-jdk)
+ # build-depend on 1.9 (upstream needs it anyway for module-info support)
+ BUILD_DEPS += , $(shell echo $(DEFAULT_JDK) | sed -e 's/default-jdk/default-jdk (>= 2:1.9)/') <!nojava>
+ endif
+ ifeq "$(JDK)" "openjdk"
+ BUILD_DEPS += , openjdk-$(JAVA_MAINVER)-jdk <!nojava>
+ JAVA_HOME=/usr/lib/jvm/java-$(JAVA_MAINVER)-openjdk-$(DEB_HOST_ARCH)
+ endif
+ TEST_JAVA_HOME=$(JAVA_HOME)
+ ifeq "$(ENABLE_MEDIAWIKI)" "y"
+ BUILD_DEPS_INDEP += , ant (>= 1.7.0)$(OOO_NO_JAVA_ARCHS) <!nojava>, ant-optional (>= 1.7.0)$(OOO_NO_JAVA_ARCHS) <!nojava>
+ else
+ # report-builder is done in build-arch already
+ ifneq (,$(filter jfreereport, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , ant (>= 1.6.5)$(OOO_NO_JAVA_ARCHS) <!nojava>
+ else
+ BUILD_DEPS_INDEP += , ant (>= 1.6.5)$(OOO_NO_JAVA_ARCHS) <!nojava>
+ endif
+ endif
+ JAVA_RUNTIME_DEPENDS = default-jre (>= 2:1.$(JAVA_RUNTIME_BASELINE))
+ JAVA_RUNTIME_DEPENDS += | java-runtime (>= $(JAVA_RUNTIME_BASELINE)) | java$(JAVA_RUNTIME_BASELINE)-runtime
+ # Suns Java "packages"
+ JAVA_RUNTIME_DEPENDS += | jre
+export JAVA_HOME
+ CONFIGURE_FLAGS += --with-jdk-home=$(JAVA_HOME)
+ JAVA_COMMON_DEPENDS= , libreoffice-java-common
+ JAVA_COMMON_DEPENDS_VERSION:= (>= $(BASE_VERSION)~)
+ ifeq "$(ENABLE_MEDIAWIKI)" "y"
+ CONFIGURE_FLAGS_INDEP += --enable-ext-wiki-publisher
+ endif
+ ifeq "$(ENABLE_REPORTBUILDER)" "y"
+ # report-builder
+ ifneq (,$(filter jfreereport, $(SYSTEM_STUFF)))
+ REPORT_BUILDER_BUILD_DEPS += , libbase-java$(OOO_NO_REPORTBUILDER_ARCHS) <!nojava>, libsac-java$(OOO_NO_REPORTBUILDER_ARCHS) <!nojava>, libxml-java (>= 1.1.6)$(OOO_NO_REPORTBUILDER_ARCHS) <!nojava>, libflute-java (>= 1.1.6)$(OOO_NO_REPORTBUILDER_ARCHS) <!nojava>, libpentaho-reporting-flow-engine-java (>= 0.9.4)$(OOO_NO_REPORTBUILDER_ARCHS) <!nojava>, liblayout-java (>= 0.2.10)$(OOO_NO_REPORTBUILDER_ARCHS) <!nojava>, libloader-java (>= 1.1.6)$(OOO_NO_REPORTBUILDER_ARCHS) <!nojava>, libformula-java (>= 1.1.7)$(OOO_NO_REPORTBUILDER_ARCHS) <!nojava>, librepository-java (>= 1.1.6)$(OOO_NO_REPORTBUILDER_ARCHS) <!nojava>, libfonts-java (>= 1.1.6)$(OOO_NO_REPORTBUILDER_ARCHS) <!nojava>, libserializer-java (>= 1.1.6)$(OOO_NO_REPORTBUILDER_ARCHS) <!nojava>
+ REPORT_BUILDER_JAR_DEPENDS := , libbase-java, libsac-java, libxml-java (>= 1.1.6), libflute-java (>= 1.1.6), libpentaho-reporting-flow-engine-java (>= 0.9.4), liblayout-java (>= 0.2.10), libloader-java (>= 1.1.6), libformula-java (>= 1.1.7), librepository-java (>= 1.1.6), libfonts-java (>= 1.1.6), libserializer-java (>= 1.1.6)
+ CONFIGURE_FLAGS += --with-libbase-jar=/usr/share/java/libbase.jar --with-libxml-jar=/usr/share/java/libxml.jar --with-flute-jar=/usr/share/java/flute.jar --with-jfreereport-jar=/usr/share/java/flow-engine.jar --with-liblayout-jar=/usr/share/java/liblayout.jar --with-libloader-jar=/usr/share/java/libloader.jar --with-libformula-jar=/usr/share/java/libformula.jar --with-librepository-jar=/usr/share/java/librepository.jar --with-libfonts-jar=/usr/share/java/libfonts.jar --with-libserializer-jar=/usr/share/java/libserializer.jar
+ endif
+ BUILD_DEPS += $(REPORT_BUILDER_BUILD_DEPS)
+ else
+ CONFIGURE_FLAGS += --disable-report-builder
+ endif
+ ifeq "$(ENABLE_NLPSOLVER)" "y"
+ CONFIGURE_FLAGS_INDEP += --enable-ext-nlpsolver
+ endif
+ OOO_OFFICEBEAN_DEP = libofficebean-java
+ BUILD_DEPS += , javahelper $(JAVAHELPER_MIN_VERSION) <!nojava>
+else
+ CONFIGURE_FLAGS += --without-java
+ DEBHELPER_OPTIONS += -Nlibreoffice-officebean -Nlibofficebean-java -Nlibreoffice-java-common -Nlibreoffice-script-provider-bsh -Nlibreoffice-script-provider-js -Nlibreoffice-subsequentcheckbase -Nlibofficebean-java -Nlibunoloader-java -Nliblibreoffice-java -Nlibreoffice-sdbc-hsqldb
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ ifeq "$(shell $(JAVA_HOME)/bin/java -version 2>&1 | grep -q Zero && echo true)" "true"
+ #RUN_MAKE_CHECK:=n
+ ENABLE_JUNIT4=n
+ endif
+endif
+
+ifeq "$(ENABLE_NSS)" "y"
+ ifneq (,$(filter nss, $(SYSTEM_STUFF)))
+ BUILD_DEPS+= , libnss3-dev (>= 3.12.3)
+ BUILD_DEPS+= , libnspr4-dev
+ else
+ CONFIGURE_FLAGS += --without-system-nss
+ endif
+else
+ CONFIGURE_FLAGS += --disable-nss
+endif
+
+ifeq "$(USE_UCPP)" "y"
+ ifneq (,$(filter ucpp, $(SYSTEM_STUFF)))
+ IDLC_CPP_DEPENDS := ucpp
+ endif
+else
+ IDLC_CPP_DEPENDS := cpp
+ CONFIGURE_FLAGS += --with-idlc-cpp=cpp
+endif
+ BUILD_DEPS += , $(IDLC_CPP_DEPENDS)
+
+ifneq (,$(filter hunspell, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libhunspell-dev (>= 1.1.5-2)
+endif
+ CONFIGURE_FLAGS += --with-external-dict-dir=$(DICT_DIR)
+
+ifneq (,$(filter altlinuxhyph, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libhyphen-dev (>= 2.4)
+endif
+ CONFIGURE_FLAGS += --with-external-hyph-dir=$(HYPH_DIR)
+
+ifneq (,$(filter boost, $(SYSTEM_STUFF)))
+ ifneq "$(BOOST_VERSION)" "default"
+ BUILD_DEPS += , libboost$(BOOST_VERSION)-dev $(BOOST_MINVER), libboost-date-time$(BOOST_VERSION)-dev $(BOOST_MINVER), libboost-iostreams$(BOOST_VERSION)-dev, libboost-filesystem$(BOOST_VERSION)-dev, libboost-locale$(BOOST_VERSION)-dev
+ #BUILD_DEPS += , libboost-thread$(BOOST_VERSION)-dev, libboost-program-options$(BOOST_VERSION)-dev
+ ifeq (,$(filter orcus, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libboost-system$(BOOST_VERSION)-dev $(BOOST_MINVER), libboost-iostreams$(BOOST_VERSION)-dev $(BOOST_MINVER), libboost-program-options$(BOOST_VERSION)-dev $(BOOST_MINVER), libboost-filesystem$(BOOST_VERSION)-dev $(BOOST_MINVER)
+ endif
+ else
+ BUILD_DEPS += , libboost-dev $(BOOST_MINVER), libboost-date-time-dev $(BOOST_MINVER), libboost-iostreams-dev $(BOOST_MINVER), libboost-filesystem-dev $(BOOST_MINVER), libboost-locale-dev $(BOOST_MINVER)
+ #BUILD_DEPS += , libboost-thread-dev, libboost-program-options-dev
+ ifeq (,$(filter orcus, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libboost-system-dev $(BOOST_MINVER), libboost-iostreams-dev $(BOOST_MINVER), libboost-program-options-dev $(BOOST_MINVER), libboost-filesystem-dev $(BOOST_MINVER)
+ endif
+ endif
+ ifeq "$(shell if [ -e /usr/lib/$(DEB_HOST_MULTIARCH)/libboost_date_time.so ]; then echo true; fi)" "true"
+ CONFIGURE_FLAGS += --with-boost-libdir=/usr/lib/$(DEB_HOST_MULTIARCH)
+ endif
+ ifneq (,$(filter dragonbox, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libdragonbox-dev (>= 1.1.3)
+ endif
+ ifneq (,$(filter libfixmath, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libfixmath-dev
+ endif
+endif
+
+ifneq "$(ENABLE_SKIA)" "y"
+ CONFIGURE_FLAGS += --disable-skia
+endif
+
+ifneq (,$(filter mdds, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libmdds-dev (>= 2.0), libmdds-dev (<< 2.1~)
+endif
+
+ifneq (,$(filter orcus, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , liborcus-dev (>= 0.17.2), liborcus-dev (<< 0.18~)
+endif
+
+ifeq "$(ENABLE_XMLHELP)" "y"
+ ifneq (,$(filter clucene, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libclucene-dev (>= 2.3.3.4-4.1)
+ endif
+endif
+
+ifeq "$(USE_EXTERNAL_CXXLIBS)" "y"
+ ifneq (,$(filter librevenge, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , librevenge-dev, librevenge-dev (<< 0.1~)
+ endif
+ ifneq (,$(filter libwpd, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libwpd-dev (>= 0.10), libwpd-dev (<< 0.11~)
+ endif
+ ifneq (,$(filter mythes, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libmythes-dev (>= 2:1.2)
+ endif
+ ifneq (,$(filter libwps, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libwps-dev (>= 0.4), libwps-dev (<< 0.5~)
+ ifeq "$(RUN_MAKE_CHECK)" "y"
+ BUILD_DEPS_ARCH += , libwps-dev (>= 0.4.12)$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ endif
+ endif
+ ifneq (,$(filter libwpg, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libwpg-dev (>= 0.3), libwpg-dev (<< 0.4~)
+ endif
+ ifneq (,$(filter libvisio, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libvisio-dev (>= 0.1), libvisio-dev (<< 0.2~)
+ endif
+ ifneq (,$(filter libcdr, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libcdr-dev (>= 0.1), libcdr-dev (<< 0.2~)
+ endif
+ ifneq (,$(filter libmspub, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libmspub-dev (>= 0.1), libmspub-dev (<< 0.2~)
+ endif
+ ifneq (,$(filter libmwaw, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libmwaw-dev (>= 0.3.1), libmwaw-dev (<< 0.4~)
+# ifeq "$(RUN_MAKE_CHECK)" "y"
+# BUILD_DEPS_ARCH += , libmwaw-dev (>= 0.3.21)$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS_ARCH += , libmwaw-dev (>= 0.3.21)
+# endif
+ endif
+ ifneq (,$(filter libodfgen, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libodfgen-dev (>= 0.1), libodfgen-dev (<< 0.2~)
+ endif
+ ifneq (,$(filter libepubgen, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libepubgen-dev (>= 0.1.0), libepubgen-dev (<< 0.2~)
+ endif
+ ifneq (,$(filter libetonyek, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libetonyek-dev, libetonyek-dev (<< 0.2~)
+ ifeq "$(RUN_MAKE_CHECK)" "y"
+ BUILD_DEPS_ARCH += , libetonyek-dev (>= 0.1.8)$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ endif
+ endif
+ ifneq (,$(filter libfreehand, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libfreehand-dev (>= 0.1), libfreehand-dev (<< 0.2~)
+ endif
+ ifneq (,$(filter libabw, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libabw-dev (>= 0.1), libabw-dev (<< 0.2~)
+ endif
+ ifneq (,$(filter libpagemaker, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libpagemaker-dev, libpagemaker-dev (<< 0.1~)
+ endif
+ ifneq (,$(filter libzmf, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libzmf-dev, libzmf-dev (<< 0.1~)
+ endif
+ ifneq (,$(filter libstaroffice, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libstaroffice-dev, libstaroffice-dev (<< 0.1~)
+ ifeq "$(RUN_MAKE_CHECK)" "y"
+ BUILD_DEPS_ARCH += , libstaroffice-dev (>= 0.0.3)$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ endif
+ endif
+ ifneq (,$(filter libqxp, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libqxp-dev, libqxp-dev (<< 0.1~)
+ endif
+ ifneq (,$(filter libebook, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libe-book-dev (>= 0.1), libe-book-dev (<< 0.2~)
+ ifeq "$(RUN_MAKE_CHECK)" "y"
+ BUILD_DEPS_ARCH += , libe-book-dev (>= 0.1.2)$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ endif
+ endif
+ ifeq "$(ENABLE_LIBCMIS)" "y"
+ ifneq (,$(filter libcmis, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libcmis-dev (>= 0.5.2~), libcmis-dev (<< 0.6~)
+ endif
+ else
+ CONFIGURE_FLAGS += --disable-libcmis
+ endif
+ ifeq "$(ENABLE_ZXING)" "y"
+ ifneq (,$(filter zxing, $(SYSTEM_STUFF)))
+ # https://cgit.freedesktop.org/libreoffice/core/commit/?id=d53340b2253537104abe6f95c8c63cc74487c3ec
+ BUILD_DEPS += , libzxingcore-dev (>= 1.2.0)
+ endif
+ else
+ CONFIGURE_FLAGS += --disable-zxing
+ endif
+endif
+ CONFIGURE_FLAGS += --with-external-thes-dir=$(THES_DIR)
+
+ifeq "$(INSTALL_APPARMOR_PROFILES)" "y"
+ BUILD_DEPS_INDEP += , dh-apparmor
+ ifeq "$(CHECK_APPARMOR_PROFILES)" "true"
+ BUILD_DEPS_INDEP += , apparmor <!nocheck>
+ endif
+endif
+
+ifeq "$(ENABLE_EOT)" "y"
+ CONFIGURE_FLAGS += --enable-eot
+ ifneq (,$(filter libeot, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libeot-dev
+ endif
+endif
+
+ifneq (,$(filter lcms2, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , liblcms2-dev
+endif
+
+ifneq (,$(filter openldap, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libldap2-dev
+endif
+
+ifneq (,$(filter liblangtag, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , liblangtag-dev (>= 0.4)
+endif
+
+ifneq (,$(filter icu, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libicu-dev (>= 52)
+endif
+
+
+ifeq "$(BUILD_CAIROCANVAS)" "y"
+ ifneq (,$(filter cairo, $(SYSTEM_STUFF)))
+ BUILD_DEPS+= , libcairo2-dev
+ endif
+else
+ CONFIGURE_FLAGS+= --disable-cairo
+endif
+
+ifeq "$(ENABLE_KF5)" "y"
+ CONFIGURE_FLAGS += --enable-kf5
+ BUILD_DEPS += , libkf5coreaddons-dev, libkf5i18n-dev, libkf5config-dev, libkf5windowsystem-dev, libkf5kio-dev
+endif
+ PLASMA_ICONSET_DEP=libreoffice-style-breeze
+ifeq "$(ENABLE_QT5)" "y"
+ CONFIGURE_FLAGS += --enable-qt5
+ BUILD_DEPS += , qtbase5-dev $(QT5_MINVER), qt5-qmake $(QT5_MINVER), qtbase5-dev-tools $(QT5_MINVER)
+ BUILD_DEPS += , libqt5x11extras5-dev $(QT5_MINVER)
+ BUILD_DEPS += , libglib2.0-dev (>= 2.4)
+ BUILD_DEPS += , libxcb1-dev
+ BUILD_DEPS += , libxcb-icccm4-dev
+endif
+ifeq "$(ENABLE_QT6)" "y"
+ CONFIGURE_FLAGS += --enable-qt6
+ BUILD_DEPS += , qt6-base-dev $(QT6_MINVER), qmake6 $(QT6_MINVER), qt6-base-dev-tools $(QT6_MINVER)
+ BUILD_DEPS += , libxcb1-dev
+endif
+
+ifeq "$(ENABLE_MARIADB)" "y"
+ ifeq "$(MYSQL_FLAVOUR)" "default"
+ BUILD_DEPS += , default-libmysqlclient-dev
+ else
+ ifeq "$(MYSQL_FLAVOUR)" "mysql"
+ ifneq (,$(filter mariadb, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libmysqlclient-dev
+ endif
+ MARIADBCONFIG=/usr/bin/mysql_config
+ endif
+ ifeq "$(MYSQL_FLAVOUR)" "mariadb"
+ ifneq (,$(filter mariadb, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libmariadb-dev
+ endif
+ MARIADBCONFIG=/usr/bin/mariadb_config
+ endif
+ endif
+else
+ CONFIGURE_FLAGS += --disable-mariadb-sdbc
+ DEBHELPER_OPTIONS += -Nlibreoffice-sdbc-mysql
+endif
+
+ifeq "$(ENABLE_FIREBIRD)" "y"
+ BASE_FIREBIRD_RECOMMENDS = libreoffice-sdbc-firebird [$(OOO_FIREBIRD_ARCHS)]
+ ifneq (,$(filter libatomic-ops, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libatomic-ops-dev (>= 7.3~alpha1+git20110913-1)$(OOO_NO_FIREBIRD_ARCHS)
+ endif
+ ifneq (,$(filter libtommath, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libtommath-dev$(OOO_NO_FIREBIRD_ARCHS)
+ endif
+ ifneq (,$(filter firebird, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , firebird-dev (>= 3.0.0.32483.ds4-4)$(OOO_NO_FIREBIRD_ARCHS)
+ # we need libEngine12.so
+ ifeq "$(RUN_MAKE_CHECK)" "y"
+ BUILD_DEPS_ARCH += , firebird3.0-server-core $(OOO_NO_FIREBIRD_ARCHS) <!nocheck>
+ endif
+ FIREBIRD_ENGINE_DEPENDS += firebird3.0-server-core
+ endif
+else
+ CONFIGURE_FLAGS += --disable-firebird-sdbc
+ DEBHELPER_OPTIONS += -Nlibreoffice-sdbc-firebird
+endif
+
+ifeq "$(BUILD_GTK3)" "y"
+ BUILD_DEPS += , libgtk-3-dev (>= 3.20.0), libglib2.0-dev (>= 2.38.0)
+ ifneq (cairo,$(findstring cairo,$(SYSTEM_STUFF)))
+ $(error GTK3 build fails without system-cairo!!)
+ endif
+ ifeq (,$(filter epoxy, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libegl1-mesa-dev
+ endif
+ GNOME_GTK_RECOMMENDS += libreoffice-gtk3
+ ifeq "$(ENABLE_INTROSPECTION)" "y"
+ BUILD_DEPS += , gobject-introspection (>= 1.32.0), libgirepository1.0-dev (>= 1.32)
+ CONFIGURE_FLAGS += --enable-introspection
+ else
+ DEBHELPER_OPTIONS+= -Ngir1.2-lokdocview-0.1
+ endif
+endif
+
+ifeq "$(BUILD_GTK4)" "y"
+ BUILD_DEPS += , libgtk-4-dev, libglib2.0-dev (>= 2.38.0), libcairo2-dev, libatk1.0-dev
+ CONFIGURE_FLAGS += --enable-gtk4
+endif
+
+ifeq "$(ENABLE_EVO2)" "n"
+ CONFIGURE_FLAGS += --disable-evolution2
+ DEBHELPER_OPTIONS += -Nlibreoffice-evolution
+else
+ CONFIGURE_FLAGS += --enable-evolution2
+ BUILD_DEPS += , libebook1.2-dev
+ LIBEBOOK_DEP = $(shell debian/scripts/get_libebook_dep.sh)
+endif
+
+ifeq "$(ENABLE_SDBC_POSTGRESQL)" "y"
+ ifneq (,$(filter postgresql, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libpq-dev (>= 9.0~)
+ else
+ BUILD_DEPS += , libkrb5-dev
+ endif
+else
+ CONFIGURE_FLAGS += --disable-postgresql-sdbc
+ DEBHELPER_OPTIONS += -Nlibreoffice-sdbc-postgresql
+endif
+
+ifeq "$(ENABLE_RANDR)" "y"
+ BUILD_DEPS += , libxrandr-dev
+else
+ CONFIGURE_FLAGS += --disable-randr
+endif
+
+ifneq "$(ENABLE_PYTHON)" "y"
+ DEBHELPER_OPTIONS+= -Npython3-uno -Nlibreoffice-script-provider-python -Npython3-access2base
+ CONFIGURE_FLAGS += --disable-python
+else
+ PYUNO_DEPENDS = python3-uno (>= 4.4.0~beta2)
+ CONFIGURE_FLAGS += --enable-python=system
+endif
+
+ifneq "$(PACKAGE_LIBRELOGO)" "y"
+ DEBHELPER_OPTIONS+= -Nlibreoffice-librelogo
+ CONFIGURE_FLAGS += --disable-librelogo
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ ifneq (,$(filter hsqldb, $(SYSTEM_STUFF)))
+ HSQLDB_MINVER= (>> 1.8.0.10)
+ HSQLDB_JAR=/usr/share/java/hsqldb1.8.0.jar
+ BUILD_DEPS += , libhsqldb1.8.0-java $(HSQLDB_MINVER)$(OOO_NO_JAVA_ARCHS) <!nojava>, libarchive-zip-perl$(OOO_NO_JAVA_ARCHS) <!nojava>
+ BASE_HSQLDB_DEPENDS = libhsqldb1.8.0-java $(HSQLDB_MINVER)
+ CONFIGURE_FLAGS += --with-hsqldb-jar=$(HSQLDB_JAR)
+ else
+ BUILD_DEPS += , libservlet3.1-java <!nojava>
+ endif
+ ifeq "$(ENABLE_SCRIPT_PROVIDER_BSH)" "y"
+ ifneq (,$(filter beanshell, $(SYSTEM_STUFF)))
+ BUILD_DEPS_INDEP += , libbsh-java <!nojava>
+ endif
+ CONFIGURE_FLAGS += --enable-scripting-beanshell
+ else
+ CONFIGURE_FLAGS += --disble-scripting-beanshell
+ DEBHELPER_OPTIONS += -Nlibreoffice-script-provider-bsh
+ endif
+ ifeq "$(ENABLE_SCRIPT_PROVIDER_JS)" "y"
+ CONFIGURE_FLAGS += --enable-scripting-javascript
+ else
+ CONFIGURE_FLAGS += --disable-scripting-javascript
+ DEBHELPER_OPTIONS += -Nlibreoffice-script-provider-js
+ endif
+endif
+
+ifneq (,$(filter lpsolve, $(SYSTEM_STUFF)))
+ ifeq "$(USE_SHARED_LPSOLVE)" "y"
+ BUILD_DEPS += , liblpsolve55-dev $(LPSOLVE_MIN_VERSION), lp-solve $(LPSOLVE_MIN_VERSION)
+ LPSOLVE_DEP = lp-solve $(LPSOLVE_MIN_VERSION)
+ else
+ BUILD_DEPS += , liblpsolve55-dev $(LPSOLVE_MIN_VERSION)
+ endif
+ ifeq "$(USE_LIBSUITESPARSE)" "y"
+ BUILD_DEPS += , libsuitesparse-dev $(SUITESPARSE_MIN_VERSION)
+ else
+ BUILD_DEPS += , libufsparse-dev
+ endif
+endif
+
+ifeq "$(USE_DBUS)" "y"
+ BUILD_DEPS += , libdbus-1-dev (>= 0.60)
+ CONFIGURE_FLAGS += --enable-dbus
+ ifeq "$(ENABLE_BLUETOOTH)" "y"
+ BUILD_DEPS += , libglib2.0-dev (>= 2.4)
+ ifneq (,$(filter bluez, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libbluetooth-dev [linux-any]
+ endif
+ else
+ CONFIGURE_FLAGS += --disable-sdremote-bluetooth
+ endif
+ ifeq "$(ENABLE_PACKAGEKIT)" "y"
+ CONFIGURE_FLAGS += --enable-packagekit
+ endif
+endif
+
+ifeq "$(ENABLE_AVAHI)" "y"
+ BUILD_DEPS += , libavahi-client-dev
+ CONFIGURE_FLAGS += --enable-avahi
+endif
+
+ifeq "$(USE_GSTREAMER)" "y"
+ BUILD_DEPS += , libgstreamer1.0-dev
+ CONFIGURE_FLAGS += --enable-gstreamer-1-0
+ BUILD_DEPS += , libgstreamer-plugins-base1.0-dev
+ GSTREAMER_PLUGINS_SUGGESTS += , gstreamer1.0-plugins-base, gstreamer1.0-plugins-good, gstreamer1.0-plugins-ugly, gstreamer1.0-plugins-bad, gstreamer1.0-libav
+else
+ CONFIGURE_FLAGS += --disable-gstreamer-1-0
+endif
+
+ifeq "$(ENABLE_WEBDAV)" "y"
+ ifneq (,$(filter curl, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libcurl4-$(CURL_SECTYPE)-dev (>= 7.68)
+ endif
+ ENABLE_CURL=y
+else
+ CONFIGURE_FLAGS += --with-webdav=no
+endif
+
+ENABLE_SAL_OPENSSL_BACKEND=n
+ifneq "$(ENABLE_SAL_OPENSSL_BACKEND)" "y"
+ ifneq (,$(filter mariadb, $(SYSTEM_STUFF)))
+ ifneq (,$(filter postgresql, $(SYSTEM_STUFF)))
+ CONFIGURE_FLAGS += --disable-openssl
+ endif
+ endif
+else
+ CONFIGURE_FLAGS += --enable-cipher-openssl-backend
+ SYSTEM_STUFF += openssl
+ BUILD_DEPS += , libssl-dev
+endif
+
+SYSTEM_STUFF += lockfile
+ifneq (,$(filter lockfile, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , liblockfile-bin
+endif
+
+ifneq (,$(filter redland, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , librdf0-dev (>= 1.0.16-2)
+endif
+
+ifeq "$(ENABLE_GUI)" "y"
+ ifneq (,$(filter epoxy, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libepoxy-dev (>= 1.2)
+ else
+ BUILD_DEPS += , libegl1-mesa-dev
+ endif
+endif
+ifneq (,$(filter glm, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libglm-dev (>= 0.9.9~a2)
+endif
+
+ifneq (,$(filter gpgmepp, $(SYSTEM_STUFF)))
+ BUILD_DEPS+= , libgpgmepp-dev (>= 1.14), libgpgme-dev, libgpg-error-dev
+endif
+ifeq "$(RUN_MAKE_CHECK)" "y"
+ BUILD_DEPS_ARCH += , gpg$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS_ARCH += , gpgconf$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS_ARCH += , gpg-agent$(OOO_NO_CHECK_ARCHS) <!nocheck>
+endif
+
+ifeq "$(ENABLE_GIO)" "y"
+ ifneq "$(BUILD_GTK3)" "y"
+ BUILD_DEPS += , libglib2.0-dev (>= 2.26.0)
+ endif
+else
+ CONFIGURE_FLAGS += --disable-gio
+endif
+
+ifeq "$(ENABLE_DCONF)" "y"
+ BUILD_DEPS += , libdconf-dev (>= 0.15.2)
+else
+ CONFIGURE_FLAGS += --disable-dconf
+endif
+
+ifeq ($(ENABLE_MERGELIBS),y)
+ CONFIGURE_FLAGS += --enable-mergelibs
+endif
+
+ifeq ($(ENABLE_LTO),y)
+ CONFIGURE_FLAGS += --enable-lto
+ # see https://lists.debian.org/debian-devel-changes/2021/11/msg02548.html
+ BUILD_DEPS += , binutils (>= 2.37-9) [ppc64]
+endif
+# go sure. if we explicitely disable LTO when it is enabled we don't want it to sneak in
+# (and vice-versa). See https://lists.debian.org/debian-devel/2022/06/msg00092.html
+ifeq ($(ENABLE_LTO),y)
+export DEB_BUILD_MAINT_OPTIONS=optimize=+lto
+# honour parallel=X. We can just remove the auto here (coming from dpkg-buildflags)
+# since upstream already adds -flto=jobserver (honouring PARALLEL already).
+# Replacing -flto=auto doesn't work since clang doesn't understand -flto=X (except thin)
+DEB_CFLAGS_MAINT_STRIP += -flto=auto
+DEB_CXXFLAGS_MAINT_STRIP += -flto=auto
+DEB_LDFLAGS_MAINT_STRIP += -flto=auto
+# save space
+ifeq "$(SMALL_SYMBOLS)" "y"
+DEB_CFLAGS_MAINT_STRIP += -ffat-lto-objects
+DEB_CXXFLAGS_MAINT_STRIP += -ffat-lto-objects
+DEB_LDFLAGS_MAINT_STRIP += -ffat-lto-objects
+endif
+export DEB_CFLAGS_MAINT_STRIP DEB_CXXFLAGS_MAINT_STRIP DEB_LDFLAGS_MAINT_STRIP
+export DEB_CFLAGS_MAINT_APPEND DEB_CXXFLAGS_MAINT_APPEND DEB_LDFLAGS_MAINT_APPEND
+else
+export DEB_BUILD_MAINT_OPTIONS=optimize=-lto
+endif
+
+ifeq ($(USE_GOLD),y)
+ CONFIGURE_FLAGS += --enable-ld=gold
+else
+ # --enable-ld=gold is default for debug builds if found
+ # FIXME: Should we allow gold here nevertheless? configure
+ # prints the following with --disable-ld:
+ # * WARNING : Linker is not capable of creating gdb index, debugger startup will be slow
+ ifeq (debug,$(findstring debug,$(DEB_BUILD_OPTIONS)))
+ ifneq "$(ALLOW_GOLD)" "y"
+ CONFIGURE_FLAGS += --disable-ld
+ endif
+ endif
+endif
+ifneq (,$(findstring mips,$(DEB_HOST_ARCH)))
+#10:46 < _rene_> can anyone shed a light on /<<PKGBUILDDIR>>/workdir/LinkTarget/Executable/bestreversemap: error while loading shared libraries:
+# /<<PKGBUILDDIR>>/instdir/program/libuno_sal.so.3: ELF file ABI version invalid? both were built in the same LO build
+#10:47 < _rene_> mips64el, apparently since gcc9 or new(er) binutils?
+#10:47 < _rene_> on an other binary:
+#10:47 < _rene_> file /home/rene/libreoffice-6.3.1~rc2/instdir/program/libunoidllo.so
+# /home/rene/libreoffice-6.3.1~rc2/instdir/program/libunoidllo.so: ELF 64-bit LSB shared object, MIPS, MIPS64 rel2 version 1 (SYSV),
+# dynamically linked, BuildID[sha1]=82f15433db9000b9dfee24ed07e2082ffb439dfd, with debug_info, not stripped
+#10:47 < _rene_> (eller, mips64el chroot)
+#[...]
+#13:49 < aurel32> _rene_: the problem is the ABI version, ie those library have Version ABI: 5 instead of 0 for normal binaries
+#13:50 < aurel32> the ABI version 5 will be used for gnu hash support in mips
+#13:51 < aurel32> support has been added to binutils trunk recently, although the default is still sysv hash style
+#13:51 < aurel32> and glibc support is still being reviewed, it might land in 2.31
+#13:51 < aurel32> previous version of libreoffice used -Wl,--hash-style=sysv
+#13:52 < aurel32> now it seems it autodetect that binutils has gnu hash support and it passes -Wl,--hash-style=gnu
+#13:52 < aurel32> but there is no support for the full toolchain yet
+#13:54 < _rene_> so I need to force -Wl,--hash-style=sysv?
+#13:54 < aurel32> --with-linker-hash-style
+#13:54 < aurel32> Use linker with --hash-style=<style> when linking
+#13:54 < aurel32> shared objects. Possible values: "sysv", "gnu",
+#13:54 < aurel32> "both". The default value is "gnu" if supported on
+#13:55 < aurel32> the build system, and "sysv" otherwise.
+#13:55 < aurel32> it looks like that the hash style detection is not perfect
+#13:55 < aurel32> _rene_: that should work indeed
+#13:55 < _rene_> ok, thanks
+#[...]
+#14:01 < _rene_> aurel32: only mips64el affected or also mipsel?
+#14:01 < _rene_> (mipsel is still building, though, so I assume it isn't)
+#14:02 < aurel32> afaiu both should be affected
+#14:03 < _rene_> ok, so I will make it $(findstring mips
+#14:04 < aurel32> on mipsel: checking for --hash-style gcc linker support... sysv
+#14:04 < aurel32> maybe the detection works better, anyway forcing it on both looks safer
+ CONFIGURE_FLAGS += --with-linker-hash-style=sysv
+endif
+
+ifeq "$(ENABLE_PCH)" "y"
+ CONFIGURE_FLAGS += --enable-pch
+endif
+
+# Use compiler cache? Include ccache in DEB_BUILD_OPTIONS for much faster rebuild times
+# A complete build uses about 9G of compiler cache.
+ifneq (ccache,$(findstring ccache,$(DEB_BUILD_OPTIONS)))
+ CONFIGURE_FLAGS += --disable-ccache
+else
+ CONFIGURE_FLAGS += --enable-ccache=nodepend
+endif
+
+## Build n projects in parallel?
+## DEB_BUILD_OPTIONS=parallel=<n>
+## if not specified LibreOffices configure tries to find it out itself
+include /usr/share/dpkg/buildopts.mk
+NUM_CPUS=$(DEB_BUILD_OPTION_PARALLEL)
+AVAIL_CPUS := $(shell getconf _NPROCESSORS_ONLN 2>/dev/null || echo 1)
+ifeq "$(PARALLEL_BUILD)" "y"
+ # we need to specify it only if it differs, otherwise configure autodetects
+ # it.
+ ifneq "$(NUM_CPUS)" "$(AVAIL_CPUS)"
+ CONFIGURE_FLAGS += --with-parallelism=$(NUM_CPUS)
+ endif
+else
+ CONFIGURE_FLAGS += --without-parallelism
+endif
+
+ifeq ($(GCC_VERSION),snapshot)
+ BUILD_PATH = /usr/lib/gcc-snapshot/bin:$$PATH
+ BUILD_LD_LIBRARY_PATH = /usr/lib/gcc-snapshot/lib:$$LD_LIBRARY_PATH
+ BUILD_DEPS += , gcc-snapshot
+else
+ BUILD_PATH = $(CURDIR)/debian/usr/bin:$$PATH
+endif
+BUILD_PATH := $(CURDIR)/debian/usr/bin:$(BUILD_PATH)
+
+# Because of the stampdir magic, when you actually want to run a rule
+# over, you would have to remove the stamp manually. Now, just do
+# 'debian/rules <target> <target> ... FORCE=1', and the stamp files
+# that match the given targets will be removed automagically.
+stampdir_targets+=prepare
+stampdir_targets+=build build-arch build-indep maintscripts
+stampdir_targets+=install-common install-arch install-indep langpacks
+stampdir_targets+=binary-arch binary-indep
+ifdef FORCE
+ DUMMY:=$(shell rm -f $(patsubst %,$(STAMP_DIR)/%,$(filter $(stampdir_targets),$(MAKECMDGOALS))))
+endif
+
+# If this is defined, then none of the 'long' commands will be run. Useful
+# for testing.
+# test_rules=1
+
+# Since the final stages use up a large amount of diskspace, provide targets to
+# remove them without needing a full rebuild
+
+# Clean up the package directories (about 830M)
+clean-debdir:
+ dh_testdir
+ # remove generated symlinks / java wrappers
+ rm -rf debian/usr
+
+ find debian -name "*.links" ! -name "libreoffice-dev-doc.links" \
+ ! -name "libreoffice-java-common.links" \
+ ! -name "liblibreofficekitgtk.links" \
+ ! -name "libreoffice-help-common.links" \
+ ! -name "python3-access2base.links" -exec rm {} \;
+ rm -f debian/libreoffice-l10n-*.ucf
+ if [ -d "$(STAMP_DIR)" ]; then rm -rf "$(STAMP_DIR)"; fi
+ rm -f debian/*.bug-script
+
+ rm -f debian/shlibs.local
+
+ rm -f debian/libreoffice-help-*.lintian-overrides
+ rm -f debian/*.install debian/*.dirs debian/*.changelog
+ rm -f debian/*.postinst debian/*.postrm debian/*.preinst debian/*.prerm debian/*.triggers
+ rm -f debian/pom*.xml
+
+ rm -rf $(CURDIR)/debian/locales
+
+ifeq "$(ENABLE_JAVA)" "y"
+ mh_clean
+endif
+ dh_clean
+
+clean:
+ dh_testroot
+ dh_testdir
+
+ if [ -f config.status ]; then \
+ $(MAKE) distclean; \
+ rm -f config.status; \
+ fi
+ rm -rf instdir-nogui
+ find $(SOURCE_TREE) -name "*.pyc" -exec rm {} \;
+ rm -rf */*.pro.obsolete
+
+ rm -rf $(SOURCE_TREE)/file-lists
+ rm -rf $(SOURCE_TREE)/pyuno-for*
+ rm -f autogen.lastrun
+ rm -f build_error.log
+ rm -f config/config_version.h
+
+ifeq "$(HELPISOS)" ""
+ rm -rf images*
+endif
+
+ rm -f download.list
+
+ rm -f extras/source/truetype/symbol/opens___.ttf
+
+ # obsolete lock file not cleaned up....
+ rm -f dbaccess/qa/extras/testdocuments/fdo84315.odb.lck
+
+ cd $(SOURCE_TREE)/helpcontent2/help3xsl && \
+ rm -f normalize.css
+ifneq "$(BULLSEYE_BACKPORT)" "y"
+ cd $(SOURCE_TREE)/helpcontent2/help3xsl && \
+ rm -f prism.js && \
+ rm -f prism.css
+endif
+
+ # Files created in debian directory
+ $(MAKE) -f debian/rules clean-debdir
+
+ $(MAKE) -f debian/rules control
+
+
+# Generate control files, because we have so many different languages
+# and need to run autopkgtests based on Architectures
+control: debian/control debian/tests/control
+
+# Based on script by Martin Quinson <Martin.Quinson@tuxfamily.org>
+debian/control: $(wildcard debian/control*in) $(SOURCE_TREE)/bin/lo-xlate-lang debian/rules
+ chmod 755 $(SOURCE_TREE)/bin/lo-xlate-lang
+ sed -e "s#%$(DEB_VENDOR)=\([^%]*\)%#, \1#g#" \
+ -e "s#%[A-Za-z]*=[^%]*%##g#" \
+ -e "s#%BUILD_DEPS_ARCH%#$(strip $(BUILD_DEPS_ARCH))#g" \
+ -e "s#%BUILD_DEPS_INDEP%#$(strip $(BUILD_DEPS_INDEP))#g" \
+ -e "s#@BUGS@#$(BUGS)#g" \
+ < debian/control.in > debian/control
+
+ for LNUM in $(filter-out en-US,$(LANGPACKISOS)) ; do \
+ LNAME=`$(SOURCE_TREE)/bin/lo-xlate-lang -l $$LNUM | perl -e 'print ucfirst(<STDIN>);'`; \
+ LCODE=`$(SOURCE_TREE)/bin/lo-xlate-lang -i $$LNUM | tr A-Z a-z`; \
+ [ "$$LNUM" = ca-valencia ] && continue; \
+ [ "$$LNUM" = sr-Latn ] && continue; \
+ [ "$$LCODE" = kmr-latn ] && LCODE=kmr; \
+ CCODE=`echo $$LCODE | sed 's/-.*//'`; \
+ case "$$LCODE" in \
+ bn) \
+ FONT_RECOMMENDS=", fonts-beng"; \
+ ;; \
+ gu) \
+ FONT_RECOMMENDS=", fonts-gujr"; \
+ ;; \
+ pa-in) \
+ FONT_RECOMMENDS=", fonts-guru"; \
+ ;; \
+ ml) \
+ FONT_RECOMMENDS=", fonts-mlym"; \
+ ;; \
+ or) \
+ FONT_RECOMMENDS=", fonts-orya"; \
+ ;; \
+ te) \
+ FONT_RECOMMENDS=", fonts-telu"; \
+ ;; \
+ ta) \
+ FONT_RECOMMENDS=", fonts-taml"; \
+ ;; \
+ hi-in|ne|mr) \
+ FONT_RECOMMENDS=", fonts-deva"; \
+ ;; \
+ he) \
+ FONT_RECOMMENDS=", culmus"; \
+ ;; \
+ km) \
+ FONT_RECOMMENDS=", fonts-khmeros"; \
+ ;; \
+ ar) \
+ FONT_RECOMMENDS=", fonts-kacst, fonts-hosny-amiri, fonts-sil-scheherazade, fonts-hosny-thabit"; \
+ ;; \
+ fa) \
+ FONT_RECOMMENDS=", fonts-farsiweb"; \
+ ;; \
+ dz) \
+ FONT_RECOMMENDS=", fonts-dzongkha"; \
+ ;; \
+ th) \
+ FONT_RECOMMENDS=", fonts-thai-tlwg"; \
+ ;; \
+ *) \
+ FONT_RECOMMENDS= ;; \
+ esac; \
+ case "$$LCODE" in \
+ rw) \
+ LOCALES_DEPENDS="locales (>= 2.3.6) | locales-all (>= 2.3.6)" \
+ ;; \
+ ss|ts|km|ns|tn) \
+ LOCALES_DEPENDS="locales (>= 2.3.5-12) | locales-all" \
+ ;; \
+ sr) \
+ LOCALES_DEPENDS="locales (>= 2.3.6.ds1-5) | locales-all" \
+ ;; \
+ as|or|nr) \
+ LOCALES_DEPENDS="locales (>= 2.3.6.ds1-1) | locales-all (>= 2.3.6.ds1-1)" \
+ ;; \
+ sw) \
+ LOCALES_DEPENDS="locales (>= 2.13-5) | locales-all (>= 2.13-5)" \
+ ;; \
+ *) \
+ LOCALES_DEPENDS="locales | locales-all" \
+ ;; \
+ esac; \
+ sed -e "s|@LNAME@|$$LNAME|g" -e "s|@LCODE@|$$LCODE|g" \
+ -e "s|@CCODE@|$$CCODE|g" \
+ -e "s|@FONT_RECOMMENDS@|$$FONT_RECOMMENDS|g" \
+ -e "s:@LOCALES_DEPENDS@:$$LOCALES_DEPENDS:g" \
+ -e "s|@LDAP_LIB@|$(LDAP_LIB)|g" \
+ >> debian/control < debian/control.lang.in; \
+ done
+
+ifneq "$(ENABLE_HELP)" "n"
+ for LNUM in $(HELPISOS) ; do \
+ LNAME=`$(SOURCE_TREE)/bin/lo-xlate-lang -l $$LNUM | perl -e 'print ucfirst(<STDIN>);'`; \
+ LCODE=`$(SOURCE_TREE)/bin/lo-xlate-lang -i $$LNUM | tr A-Z a-z`; \
+ [ "$$LNUM" = ca-valencia ] && continue; \
+ CCODE=`echo $$LCODE | sed 's/-.*//'`; \
+ sed -e "s|@LNAME@|$$LNAME|g" -e "s|@LCODE@|$$LCODE|g" \
+ -e "s|@CCODE@|$$CCODE|g" \
+ >> debian/control < debian/control.help.in; \
+ done
+ # en_US is in -common
+ perl -pi -e 's|(Depends: libreoffice-writer \| language-support-translations-en), libreoffice-l10n-en-us|\1|' \
+ debian/control
+ perl -pi -e 's|(Depends: libreoffice-writer, libreoffice-l10n-en-us)|\1, fonts-deva|' \
+ debian/control
+endif
+ cat debian/control.ure.in >> debian/control
+ifeq "$(ENABLE_JAVA)" "y"
+ ifeq "$(ENABLE_MEDIAWIKI)" "y"
+ cat debian/control.mediawiki.in >> debian/control
+ endif
+ ifeq "$(ENABLE_REPORTBUILDER)" "y"
+ cat debian/control.reportbuilder.in >> debian/control
+ endif
+ ifeq "$(ENABLE_NLPSOLVER)" "y"
+ cat debian/control.nlpsolver.in >> debian/control
+ endif
+endif
+ cat debian/control.fonts.in >> debian/control
+ifeq "$(PACKAGE_SDK)" "y"
+ cat debian/control.sdk.in >> debian/control
+endif
+ifeq "$(PACKAGE_LOKIT)" "y"
+ cat debian/control.lokit.in >> debian/control
+endif
+ifeq "$(BUILD_GTK3)" "y"
+ cat debian/control.gtk3.in >> debian/control
+endif
+ifeq "$(BUILD_GTK4)" "y"
+ cat debian/control.gtk4.in >> debian/control
+endif
+ifeq "$(ENABLE_KF5)" "y"
+ cat debian/control.kf5.in >> debian/control
+endif
+ifeq "$(ENABLE_QT5)" "y"
+ cat debian/control.qt5.in >> debian/control
+endif
+ifeq "$(ENABLE_QT6)" "y"
+ cat debian/control.qt6.in >> debian/control
+endif
+ifeq "$(BUILD_PLASMA)" "y"
+ cat debian/control.plasma.in >> debian/control
+endif
+ cat debian/control.postgresql.in >> debian/control
+ifeq "$(ENABLE_EVO2)" "y"
+ cat debian/control.evolution.in >> debian/control
+endif
+ cat debian/control.test-packages.in >> debian/control
+ifeq "$(PACKAGE_LIBRELOGO)" "y"
+ cat debian/control.librelogo.in >> debian/control
+endif
+ cat debian/control.firebird.in >> debian/control
+
+ perl -pi -e "s,%OOO_ARCHS%,$(OOO_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_NOGUI_ARCHS%,$(OOO_NOGUI_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_64BIT_ARCHS%,$(OOO_64BIT_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_BE_ARCHS%,$(OOO_BE_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_LE_ARCHS%,$(OOO_LE_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_BASE_ARCHS%,$(OOO_BASE_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_NO_BASE_ARCHS%,$(OOO_NO_BASE_ARCHS),"g debian/control
+ perl -pi -e "s,%OOO_JAVA_ARCHS%,$(OOO_JAVA_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_ARCH_DEP_EXTENSIONS_ARCHS%,$(OOO_ARCH_DEP_EXTENSIONS_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_REPORTBUILDER_ARCHS%,$(OOO_REPORTBUILDER_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_NO_REPORTBUILDER_ARCHS%,$(OOO_NO_REPORTBUILDER_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_FIREBIRD_ARCHS%,$(OOO_FIREBIRD_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_NO_FIREBIRD_ARCHS%,$(OOO_NO_FIREBIRD_ARCHS),g" debian/control
+ perl -pi -e "s#%BUILD_DEPS%#$(strip $(BUILD_DEPS))#g" debian/control
+ perl -pi -e "s#%JUNIT_MIN_VER%#$(JUNIT_MIN_VER)#g" debian/control
+ifeq "$(BUILD_PLASMA)" "y"
+ perl -pi -e 's/%LO-DESKTOP-INTEGRATION%/libreoffice-gnome | libreoffice-plasma/' debian/control
+else
+ perl -pi -e 's/%LO-DESKTOP-INTEGRATION%/libreoffice-gnome/' debian/control
+endif
+
+ifeq (sk,$(findstring sk,$(HELPISOS)))
+ perl -pi -e 's/(Depends:.*)libreoffice-l10n-sk(.*)$$/\1libreoffice-l10n-sk, libreoffice-help-cs\2/' debian/control
+endif
+ifeq (pt-BR,$(findstring pt-BR,$(LANGPACKISOS)))
+ perl -pi -e 's/libreoffice2-l10n-pt-br$$/libreoffice2-l10n-pt-br, broffice/' debian/control
+ perl -pi -e 's/libreoffice2-l10n-pt-br$$/libreoffice2-l10n-pt-br, broffice/' debian/control
+ perl -pi -e 's/libreoffice2-l10n-pt-br$$/libreoffice2-l10n-pt-br, broffice/' debian/control
+endif
+
+ifeq "$(MYSQL_FLAVOUR)" "mysql"
+ perl -pi -e "s/(Build-Conflicts: .*)/\1,libmariadbclient-dev,/" debian/control
+endif
+ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ # be sure to use our rebuilt font
+ perl -pi -e "s/(Build-Conflicts: .*)/\1,fonts-opensymbol <!nocheck>,/" debian/control
+endif
+
+ifneq "$(ALLOW_CLANG)" "y"
+ perl -pi -e "s/(Build-Conflicts: .*)/\1,clang,/" debian/control
+endif
+ $(PYTHON) debian/scripts/joinctrl.py < debian/control > debian/control.tmp
+ mv debian/control.tmp debian/control
+
+ # make -l10n-fi suggest libreoffice-spellcheck-fi to
+ # match myspell-fi and libreoffice-soikko/-voikko
+ perl -pi -e 's/myspell-dictionary-fi/myspell-dictionary-fi | libreoffice-spellcheck-fi/' debian/control
+ perl -pi -e 's/hyphen-fi/hyphen-fi | libreoffice-hyphenation-fi/' debian/control
+
+ifeq "$(USE_DBUS)" "y"
+ ifeq "$(ENABLE_BLUETOOTH)" "y"
+ perl -pi -e 's/paperconf$$/paperconf\n * bluez: Bluetooth support for Impress (slideshow remote control)/' debian/control
+ endif
+ perl -pi -e 's/Description: office productivity suite -- presentation/Suggests: bluez\nDescription: office productivity suite -- presentation/' debian/control
+endif
+
+ifneq "$(DICT_DIR)" "/usr/share/hunspell"
+ perl -pi -e 's/^Breaks:.*myspell.*\n//' debian/control
+endif
+
+ifeq "$(ENABLE_APPARMOR_PROFILES)" "y"
+ perl -pi -e 's/ttf-mscorefonts-installer/ttf-mscorefonts-installer, apparmor (>= 2.13.1~)/' debian/control
+ perl -pi -e 's/openoffice-unbundled/openoffice-unbundled, apparmor (<< 2.13.1~)/' debian/control
+
+endif
+
+.DELETE_ON_ERROR: debian/control
+
+debian/tests/control: debian/tests/control.in debian/rules
+ sed -e "s|%OOO_JAVA_ARCHS%|$(OOO_JAVA_ARCHS)|g" \
+ -e "s|%OOO_JUNIT_ARCHS%|$(OOO_JUNIT_ARCHS)|g" \
+ -e "s|%OOO_NOGUI_ARCHS%|$(OOO_NOGUI_ARCHS)|g" \
+ -e "s|%OOO_CHECK_FATAL_ARCHS%|$(OOO_CHECK_FATAL_ARCHS)|g" \
+ -e "s|%AUTOPKGTEST_CPPUNIT_PACKAGES%|$(shell echo $(AUTOPKGTEST_CPPUNIT_PACKAGES) | sed -e "s/\ /,/g")|g" \
+ > debian/tests/control < debian/tests/control.in
+
+.DELETE_ON_ERROR: debian/tests/control
+
+# All 'important' targets have 2 lines. The one that is run by
+# dpkg-buildpackage or the user, and the one that does the actual work. This
+# indirection is needed so that the 'stamp' files that signify when a rule is
+# done can be located in a separate 'stampdir'. Recall that make has no way to
+# know when a goal has been met for a phony target (like "build" or "install").
+#
+# At the end of each stampdir target, be sure to run the command 'touch $@'
+# so that the target will not be run again. Removing the file will make
+# make run the target over.
+
+prepare: $(STAMP_DIR)/prepare
+$(STAMP_DIR)/prepare:
+ dh_testdir
+
+ # Make sure needed scripts are executable
+ set -e;\
+ for FILE in debian/scripts/move-if-change \
+ debian/scripts/get_libebook_dep.sh \
+ debian/scripts/locale-gen \
+ autogen.sh; \
+ do \
+ chmod 755 $$FILE ;\
+ done
+
+ mkdir -p $(STAMP_DIR)
+
+ # Make sure we have /proc mounted - otherwise idlc will fail later.
+ test -r /proc/version
+
+ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ifeq (terse,$(findstring terse,$(DEB_BUILD_OPTIONS)))
+ if [ -d .pc/do-not-hide-test-output.diff ]; then \
+ patch -p1 -R < debian/patches/do-not-hide-test-output.diff; \
+ TMP=`mktemp -q`; grep -v do-not-hide-test-output .pc/applied-patches \
+ > $$TMP && mv $$TMP .pc/applied-patches; \
+ rm -rf .pc/do-not-hide-test-output.diff; \
+ fi
+endif
+endif
+
+ifeq "$(ENABLE_PCH)" "y"
+ # regen PCHs to go sure...
+ bin/update_pch.sh
+endif
+
+ cd $(SOURCE_TREE)/helpcontent2/help3xsl && \
+ ln -sf /usr/share/javascript/normalize.css/normalize.css
+ifneq "$(BULLSEYE_BACKPORT)" "y"
+ cd $(SOURCE_TREE)/helpcontent2/help3xsl && \
+ ln -sf /usr/share/nodejs/prismjs/prism.js && \
+ ln -sf /usr/share/nodejs/prismjs/themes/prism-coy.css prism.css
+endif
+
+ touch $@
+
+.PHONY: config_host.mk
+config_host.mk:
+ rm -f config.status autogen.lastrun
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) \
+ CLANGDIR=$(CLANGDIR) \
+ MARIADBCONFIG=$(MARIADBCONFIG) \
+ FIREBIRD_CFLAGS=$(FIREBIRD_CFLAGS) FIREBIRD_LIBS=$(FIREBIRD_LIBS) \
+ ./autogen.sh $(CONFIGURE_FLAGS)
+
+build:
+ $(CURDIR)/debian/rules build-arch
+ $(CURDIR)/debian/rules build-indep
+ touch $(STAMP_DIR)/$@
+
+build-arch: $(STAMP_DIR)/prepare $(STAMP_DIR)/build-arch
+$(STAMP_DIR)/build-arch:
+#build-arch: ENABLE_HELP = n PACKAGE_SDK_DOCS = n ENABLE_MEDIAWIKI = n ENABLE_SCRIPT_PROVIDER_BSH = n ENABLE_SCRIPT_PROVIDER_JS = n
+ dh_testdir
+
+ifeq "$(BUILD_NOGUI_PACKAGES)" "y"
+ # build with --disable-gui first
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) \
+ CLANGDIR=$(CLANGDIR) \
+ MARIADBCONFIG=$(MARIADBCONFIG) \
+ FIREBIRD_CFLAGS=$(FIREBIRD_CFLAGS) FIREBIRD_LIBS=$(FIREBIRD_LIBS) \
+ ./autogen.sh $(CONFIGURE_FLAGS) \
+ --without-junit --without-cppunit \
+ --disable-ext-wiki-publisher \
+ --disable-scripting-javascript --disable-scripting-beanshell \
+ --without-doxygen --without-javadoc \
+ --with-galleries=no --with-theme="$(DEFAULT_IMAGE)" \
+ --disable-gui --disable-introspection --disable-qt5 --disable-kf5
+
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) ARCH_FLAGS=$(ARCH_FLAGS) TMP=`mktemp -q -d` $(MAKE) build-non-l10n-only
+
+ rm -rf instdir-nogui
+ cp -r instdir instdir-nogui
+
+ # clean. cleaning up only potentially affected ones was not really
+ # maintainable and broke running the uitests since something apparently was not rebuilt
+ # for "use UI" as it should.
+ # Better safe than sorry, even though that increases build time for a magnitude...
+ $(MAKE) clean
+endif
+
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) \
+ CLANGDIR=$(CLANGDIR) \
+ MARIADBCONFIG=$(MARIADBCONFIG) \
+ FIREBIRD_CFLAGS=$(FIREBIRD_CFLAGS) FIREBIRD_LIBS=$(FIREBIRD_LIBS) \
+ QT5DIR=/usr/lib/$(DEB_HOST_MULTIARCH)/qt5 QT6DIR=/usr/lib/qt6 \
+ ./autogen.sh $(CONFIGURE_FLAGS) \
+ --without-junit --without-cppunit \
+ --disable-ext-wiki-publisher \
+ --disable-scripting-javascript --disable-scripting-beanshell \
+ --without-doxygen --without-javadoc \
+ --with-galleries=no --with-theme="$(DEFAULT_IMAGE)"
+
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) ARCH_FLAGS=$(ARCH_FLAGS) TMP=`mktemp -q -d` $(MAKE) build-non-l10n-only
+
+ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ $(CURDIR)/debian/rules check
+endif
+
+ifneq "$(BUILD_ISOS)" "en-US"
+ # build sysui again with all languages; as it contains language-specific help and/or descriptions...
+ $(MAKE) sysui.clean
+ make cmd cmd="cd sysui; export WITH_LANG='$(LANGPACKISOS)'; export WITH_LANG_LIST='$(LANGPACKISOS)'; $(MAKE)"
+endif
+
+ touch $@
+
+build-indep: $(STAMP_DIR)/prepare $(STAMP_DIR)/build-indep
+$(STAMP_DIR)/build-indep:
+ dh_testdir
+
+ifeq "$(PACKAGE_SDK)" "y"
+ if [ -f Makefile ]; then $(MAKE) odk.clean; fi
+endif
+ if [ -f Makefile ]; then $(MAKE) scp2.clean; fi
+
+ rm -f config.status autogen.lastrun
+
+ifeq "$(ENABLE_HELP)" "y"
+ ifeq (pt,$(findstring pt,$(HELPISOS)))
+ # this somehow is missing. let's assume pt-BR is sufficiently ok for "original" pt
+ if [ ! -f helpcontent2/source/media/screenshots/modules/simpress/ui/prntopts/pt/prntopts.png ]; then \
+ mkdir -p helpcontent2/source/media/screenshots/modules/simpress/ui/prntopts/pt; \
+ cp helpcontent2/source/media/screenshots/modules/simpress/ui/prntopts/pt-BR/prntopts.png \
+ helpcontent2/source/media/screenshots/modules/simpress/ui/prntopts/pt; \
+ fi
+ endif
+endif
+
+ # now build with the indep stuff (javadoc, languages, ....)
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) \
+ MARIADBCONFIG=$(MARIADBCONFIG) \
+ FIREBIRD_CFLAGS=$(FIREBIRD_CFLAGS) FIREBIRD_LIBS=$(FIREBIRD_LIBS) \
+ QT5DIR=/usr/lib/$(DEB_HOST_MULTIARCH)/qt5 QT6DIR=/usr/lib/qt6 \
+ ./autogen.sh $(CONFIGURE_FLAGS) $(CONFIGURE_FLAGS_INDEP)
+
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) ARCH_FLAGS=$(ARCH_FLAGS) TMP=`mktemp -q -d` $(MAKE) build
+ifeq "$(BUILD_TEST_PACKAGES)" "y"
+ ifeq "$(ENABLE_JUNIT4)" "y"
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) ARCH_FLAGS=$(ARCH_FLAGS) TMP=`mktemp -q -d` $(MAKE) Jar_{OOoRunner,test,ConnectivityTools}
+ endif
+endif
+
+ifeq "$(BUILD_TEST_PACKAGES)" "y"
+ # doesn't necessarily exist unless you also ran check...
+ if [ -d workdir/Zip ]; then \
+ find workdir/Zip -name "smoketestdoc*" | xargs rm; \
+ patch -p0 < $(CURDIR)/debian/tests/patches/smoketest-disable-extension-tests.diff; \
+ cd smoketest && $(MAKE) Zip_smoketestdoc; cd ..; \
+ patch -p0 -R < $(CURDIR)/debian/tests/patches/smoketest-disable-extension-tests.diff; \
+ cp workdir/Zip/smoketestdoc.zip workdir/Zip/smoketestdoc.sxw; \
+ fi
+endif
+
+ifneq "$(AUTOPKGTEST_BUILD)" "y"
+ ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ $(CURDIR)/debian/rules check-indep
+ endif
+endif
+
+ touch $@
+
+check:
+ifeq "$(BUILD_TESTS)" "y"
+ ifneq (,$(filter $(DEB_HOST_ARCH),$(OOO_NO_BASE_ARCHS)))
+ patch -p1 < $(CURDIR)/debian/tests/patches/disable-db-tests.diff
+ endif
+ ifeq (,$(filter $(DEB_HOST_ARCH),$(OOO_EXTENSIONS_ARCHS)))
+ cd $(SOURCE_TREE)/smoketest && \
+ patch -p1 < $(CURDIR)/debian/tests/patches/smoketest-disable-extension-tests.diff
+ endif
+ # we need to do it here (and unapply after the tests) to not have this end up in the config
+ # which gets installed later into fonts-opensymbol
+ patch -p1 < $(CURDIR)/debian/tests/patches/fontconfig-2.14.1-no-RGB-stripes-layout-for-sub-pixel-rendering.diff
+ cd $(SOURCE_TREE)/postprocess && $(MAKE) verbose=t
+
+ # enable cppunit etc.
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) \
+ CLANGDIR=$(CLANGDIR) \
+ MARIADBCONFIG=$(MARIADBCONFIG) \
+ FIREBIRD_CFLAGS=$(FIREBIRD_CFLAGS) FIREBIRD_LIBS=$(FIREBIRD_LIBS) \
+ QT5DIR=/usr/lib/$(DEB_HOST_MULTIARCH)/qt5 QT6DIR=/usr/lib/qt6 \
+ ./autogen.sh $(CONFIGURE_FLAGS) \
+ --disable-ext-wiki-publisher \
+ --disable-scripting-javascript --disable-scripting-beanshell \
+ --without-doxygen --without-javadoc \
+ --with-galleries=no --with-theme="$(DEFAULT_IMAGE)"
+
+ # build the tests (first)
+ export gb_SUPPRESS_TESTS=true; \
+ $(MAKE) check
+endif
+
+ifneq "$(AUTOPKGTEST_BUILD)" "y"
+ifeq "$(RUN_MAKE_CHECK)" "y"
+ # generate the needed en_US.UTF-8 locale
+ mkdir -p $(CURDIR)/debian/locales
+ USE_CPUS=$(NUM_CPUS) debian/scripts/locale-gen
+
+ # and now run them
+ $(IGNORE_MAKE_CHECK_FAILURES)t=`mktemp -q -d`; \
+ cd $(SOURCE_TREE) && \
+ export PATH=$(BUILD_PATH); \
+ export TMPDIR=$$t; \
+ export HOME=$$t; \
+ export LOCPATH=$(CURDIR)/debian/locales; \
+ export LANG=en_US.UTF-8; \
+ export TZ=UTC; \
+ unset DISPLAY; \
+ unset CONNECTIVITY_TEST_MYSQL_DRIVER; \
+ export PARALLELISM=1; \
+ if [ -x /usr/bin/gdb ]; then ulimit -c unlimited; fi && \
+ $(TEST_TIMEOUT) $(MAKE) -k check || $(TEST_TIMEOUT) $(MAKE) check && \
+ rm -rf $$t
+endif
+endif
+
+ifeq "$(BUILD_TESTS)" "y"
+ ifneq (,$(filter $(DEB_HOST_ARCH),$(OOO_NO_BASE_ARCHS)))
+ patch -p1 -R < $(CURDIR)/debian/tests/patches/disable-db-tests.diff
+ endif
+ ifeq (,$(filter $(DEB_HOST_ARCH),$(OOO_EXTENSIONS_ARCHS)))
+ cd $(SOURCE_TREE)/smoketest && \
+ patch -p1 -R < $(CURDIR)/debian/tests/patches/smoketest-disable-extension-tests.diff
+ endif
+ patch -p1 -R < $(CURDIR)/debian/tests/patches/fontconfig-2.14.1-no-RGB-stripes-layout-for-sub-pixel-rendering.diff
+ cd $(SOURCE_TREE)/postprocess && $(MAKE) verbose=t
+endif
+
+check-indep:
+ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ ifeq "$(ENABLE_JAVA)" "y"
+ # since the gb_SUPPRESS_CHECK stuff in build this isn't checked.
+ # probably should, so do it here manually.
+ $(IGNORE_MAKE_CHECK_FAILURES)cd odk && \
+ $(MAKE) CustomTarget_odk/check
+ ifneq (,$(findstring -indep,$(MAKECMDGOALS)))
+ # was already checked in check
+ $(IGNORE_MAKE_CHECK_FAILURES)if [ ! -e $(STAMP_DIR)/build-arch ]; then \
+ cd odk && $(MAKE) CustomTarget_odk/build-examples && \
+ $(MAKE) CustomTarget_odk/build-examples_java; \
+ fi
+ endif
+ endif
+endif
+
+install: $(STAMP_DIR)/install-common $(STAMP_DIR)/install-arch $(STAMP_DIR)/install-indep
+
+install-common: $(STAMP_DIR)/install-common
+$(STAMP_DIR)/install-common:
+ dh_testdir
+ dh_testroot
+
+ dh_prep
+ rm -f debian/*.install debian/*.dirs
+
+ # remove those for safety in case the languages might change on
+ # testbuilds. then the /*/ in dh_installdocs in binary-* won't work
+ # anymore (different dirs)
+ rm -rf $(SOURCE_TREE)/instsetoo_native/util/LibreOffice
+
+ rm -rf $(SOURCE_TREE)/file-lists
+
+ # install LibreOffice.
+ cd $(SOURCE_TREE)/; \
+ PATH=$(BUILD_PATH) \
+ DESTDIR=$(CURDIR)/debian/tmp \
+ $(MAKE) distro-pack-install
+ export DESTDIR=$(CURDIR)/debian/tmp ;\
+ export VERSION=$(OOVER); \
+ export OOINSTBASE=$(OODIR); \
+ export OOO_LANGS_LIST="$(ISOS)"; \
+ $(CURDIR)/debian/scripts/gid2pkgdirs.sh
+ifeq "$(BUILD_DBGSYM_PACKAGES)" "y"
+ make cmd cmd="export DESTDIR=$(CURDIR)/debian/tmp; $(CURDIR)/solenv/bin/install-gdb-printers -a /usr/share/gdb/auto-load/$(OODIR) -c -i /$(OODIR) -p /usr/share/libreoffice/gdb"
+endif
+
+ # FIXME
+ cd $(CURDIR)/debian/tmp/pkg && rm -rf \*
+
+ifeq "$(ENABLE_QT5)" "y"
+ # we need to do it here. If -kf5 isn't built
+ # there's no -kf5.install generated, so dh_missing complains later
+ mkdir -p debian/tmp/pkg/libreoffice-qt5/$(OODIR)/program
+ mv debian/tmp/pkg/libreoffice-kde/$(OODIR)/program/libvclplug_qt5lo.so\
+ debian/tmp/pkg/libreoffice-qt5/$(OODIR)/program
+endif
+ifeq "$(ENABLE_QT6)" "y"
+ mkdir -p debian/tmp/pkg/libreoffice-qt6/$(OODIR)/program
+ mv debian/tmp/pkg/libreoffice-kde/$(OODIR)/program/libvclplug_qt6lo.so\
+ debian/tmp/pkg/libreoffice-qt6/$(OODIR)/program
+endif
+ifeq "$(ENABLE_KF5)" "y"
+ mv debian/tmp/pkg/libreoffice-kde \
+ debian/tmp/pkg/libreoffice-kf5
+ifeq "$(BUILD_PLASMA)" "y"
+ mkdir -p debian/tmp/pkg/libreoffice-plasma/$(OODIR)/program
+ mv debian/tmp/pkg/libreoffice-kf5/$(OODIR)/program/libkf5be1lo.so \
+ debian/tmp/pkg/libreoffice-plasma/$(OODIR)/program
+else
+ rm -f debian/tmp/pkg/libreoffice-kf5/$(OODIR)/libkf5be1lo.so
+endif
+endif
+
+ifeq "$(ENABLE_HELP)" "y"
+ifeq "$(ENABLE_HTML_HELP)" "y"
+ mkdir -p debian/tmp/pkg/libreoffice-help-common/$(OODIR); \
+ mv debian/tmp/pkg/libreoffice-common/$(OODIR)/help \
+ debian/tmp/pkg/libreoffice-help-common/$(OODIR)
+endif
+endif
+
+ # prepare install/dir files for dh
+ for i in `cd $(CURDIR)/debian/tmp/pkg; ls -1 | xargs`; do \
+ echo "$${i}/usr/* usr" > debian/$$i.install; \
+ (cd debian/tmp/pkg/$$i; find . -type d | sed -e "s,\./,,") \
+ > debian/$$i.dirs; \
+ done
+ echo "/etc/libreoffice/registry/res" >> debian/libreoffice-common.dirs
+
+ # the english resources should be in -common
+ cat debian/libreoffice-l10n-en-US.dirs >> debian/libreoffice-common.dirs
+ cat debian/libreoffice-l10n-en-US.install >> debian/libreoffice-common.install
+ rm -f debian/libreoffice-l10n-en-US.dirs debian/libreoffice-l10n-en-US.install
+
+ # and ca-valencia in -ca...
+ifeq (ca-valencia,$(findstring ca-valencia,$(LANGPACKISOS)))
+ if [ -f debian/libreoffice-l10n-ca-valencia.dirs -a -f debian/libreoffice-l10n-ca-valencia.install ]; then \
+ cat debian/libreoffice-l10n-ca-valencia.dirs >> debian/libreoffice-l10n-ca.dirs; \
+ cat debian/libreoffice-l10n-ca-valencia.install >> debian/libreoffice-l10n-ca.install; \
+ rm -f debian/libreoffice-l10n-ca-valencia.dirs debian/libreoffice-l10n-ca-valencia.install; \
+ fi
+endif
+ifeq "$(ENABLE_HELP)" "y"
+ifeq (ca-valencia,$(findstring ca-valencia,$(HELPISOS)))
+ if [ -f debian/libreoffice-help-ca-valencia.dirs -a -f debian/libreoffice-help-ca-valencia.install ]; then \
+ cat debian/libreoffice-help-ca-valencia.dirs >> debian/libreoffice-help-ca.dirs; \
+ cat debian/libreoffice-help-ca-valencia.install >> debian/libreoffice-help-ca.install; \
+ rm -f debian/libreoffice-help-ca-valencia.dirs debian/libreoffice-help-ca-valencia.install; \
+ fi
+endif
+endif
+ # and sr-Latn should be in -sr
+ifeq (sr-Latn,$(findstring sr-Latn,$(LANGPACKISOS)))
+ if [ -f debian/libreoffice-l10n-sr-Latn.dirs -a -f debian/libreoffice-l10n-sr-Latn.install ]; then \
+ cat debian/libreoffice-l10n-sr-Latn.dirs >> debian/libreoffice-l10n-sr.dirs; \
+ cat debian/libreoffice-l10n-sr-Latn.install >> debian/libreoffice-l10n-sr.install; \
+ rm -f debian/libreoffice-l10n-sr-Latn.dirs debian/libreoffice-l10n-sr-Latn.install; \
+ fi
+endif
+
+ # This should be in -kmr... This is different like the above where
+ # we move different "variants" into the "base" but there's only kmr-Latn
+ # for Kurmanji, but I don't really want to have that -latn suffix in
+ # the packages
+ifeq (kmr-Latn,$(findstring kmr-Latn,$(LANGPACKISOS)))
+ if [ -f debian/libreoffice-l10n-kmr-Latn.dirs -a -f debian/libreoffice-l10n-kmr-Latn.install ]; then \
+ cat debian/libreoffice-l10n-kmr-Latn.dirs >> debian/libreoffice-l10n-kmr.dirs; \
+ cat debian/libreoffice-l10n-kmr-Latn.install >> debian/libreoffice-l10n-kmr.install; \
+ rm -f debian/libreoffice-l10n-kmr-Latn.dirs debian/libreoffice-l10n-kmr-Latn.install; \
+ fi
+endif
+
+ # fixup case (-l10n-pt-BR -> l10n-pt-br etc.)
+ for iso in $(ISOS); do \
+ pkgiso=`echo $$iso | tr A-Z a-z`; \
+ if [ "$$iso" != "$$pkgiso" ]; then \
+ if [ "$$iso" != "en-US" -a \
+ -e debian/libreoffice-l10n-$$iso.dirs -a \
+ -e debian/libreoffice-l10n-$$iso.install ]; then \
+ mv debian/libreoffice-l10n-$$iso.dirs \
+ debian/libreoffice-l10n-$$pkgiso.dirs; \
+ mv debian/libreoffice-l10n-$$iso.install \
+ debian/libreoffice-l10n-$$pkgiso.install; \
+ fi; \
+ if [ -e debian/libreoffice-help-$$iso.dirs -a \
+ -e debian/libreoffice-help-$$iso.install ]; then \
+ mv debian/libreoffice-help-$$iso.dirs \
+ debian/libreoffice-help-$$pkgiso.dirs; \
+ mv debian/libreoffice-help-$$iso.install \
+ debian/libreoffice-help-$$pkgiso.install; \
+ fi; \
+ fi; \
+ done
+
+ # fix up still sneaking in ./. They break dh_install (it installs
+ # but wrongly complains about it as not-installed files)
+ perl -pi -e 's,\./,,' debian/libreoffice-common.install
+ perl -pi -e 's,\./,,' debian/ure.install
+
+ifneq "$(ENABLE_HELP)" "n"
+ # remove non-packaged localized help. This a) saves space
+ # and b) we need this for the following dh_install as there will be
+ # no .install files created and dh_install will warn/fail due
+ # to non-installed files.
+ for iso in $(filter-out en-US,$(LANGPACKISOS)); do \
+ if ! `echo $(HELPISOS) | grep -q $$iso` || [ "$$iso" = "sk" ] ; then \
+ pkgiso=`echo $$iso | tr A-Z a-z`; \
+ rm -rf debian/tmp/pkg/libreoffice-help-$$iso; \
+ rm -f debian/libreoffice-help-$$pkgiso.dirs; \
+ rm -f debian/libreoffice-help-$$pkgiso.install; \
+ fi; \
+ done
+endif
+
+ifneq "$(PACKAGE_LIBRELOGO)" "y"
+ rm -rf debian/tmp/pkg/libreoffice-librelogo
+endif
+
+ # FIXME; hack: somehow there only the dirs are there (dh_installdirs). they *are* in the install phase and gid2pkgdirs also
+ # is supposed to install it to the dir but apparently doesn't. They are in instdir though, so let's use it from
+ # there..
+ifeq "$(ENABLE_NLPSOLVER)" "y"
+ if [ -d instdir/share/extensions/nlpsolver ]; then \
+ rm -rf debian/tmp/pkg/libreoffice-nlpsolver; \
+ mkdir -p debian/tmp/pkg/libreoffice-nlpsolver/$(OODIR)/share/extensions; \
+ cp -ra instdir/share/extensions/nlpsolver \
+ debian/tmp/pkg/libreoffice-nlpsolver/$(OODIR)/share/extensions; \
+ fi
+endif
+ifeq "$(ENABLE_MEDIAWIKI)" "y"
+ if [ -d instdir/share/extensions/wiki-publisher ]; then \
+ rm -rf debian/tmp/pkg/libreoffice-wiki-publisher; \
+ mkdir -p debian/tmp/pkg/libreoffice-wiki-publisher/$(OODIR)/share/extensions; \
+ cp -ra instdir/share/extensions/wiki-publisher \
+ debian/tmp/pkg/libreoffice-wiki-publisher/$(OODIR)/share/extensions; \
+ fi
+endif
+
+ for i in calc impress draw base writer; do \
+ echo "../usr/share/metainfo/libreoffice-$$i.appdata.xml /usr/share/metainfo/" >> $(PKGDIR)-$$i.install; \
+ done
+
+ifeq "$(BUILD_PLASMA)" "y"
+ echo "../usr/share/metainfo/org.libreoffice.kde.metainfo.xml /usr/share/metainfo/" >> $(PKGDIR)-plasma.install
+endif
+
+ifeq "$(PACKAGE_LOKIT)" "y"
+ echo "../../../include/LibreOfficeKit usr/include" > debian/libreofficekit-dev.install
+endif
+ifeq "$(ENABLE_INTROSPECTION)" "y"
+ echo "../../../workdir/CustomTarget/sysui/share/libreoffice/LOKDocView-0.1.gir /usr/share/gir-1.0/" >> debian/libreofficekit-dev.install
+ echo "../../../workdir/CustomTarget/sysui/share/libreoffice/LOKDocView-0.1.typelib /usr/lib/$(DEB_HOST_MULTIARCH)/girepository-1.0" >> debian/gir1.2-lokdocview-0.1.install
+endif
+
+ifneq "$(ENABLE_GUI)" "y"
+ rm -rf debian/tmp/pkg/libreofficekit-data
+endif
+
+ dh_installdirs -A
+ dh_install -A --sourcedir=debian/tmp/pkg && dh_missing -A --sourcedir=debian/tmp/pkg --fail-missing
+
+ # somehow this isn't installed anymore on -B builds...
+ if [ ! -f debian/libreoffice-report-builder/$(OODIR)/program/librptlo.so ]; then \
+ mkdir -p debian/libreoffice-report-builder/$(OODIR)/program/; \
+ for i in librptlo.so librptuilo.so librptxmllo.so; do \
+ cp $(CURDIR)/instdir/program/$$i \
+ debian/libreoffice-report-builder/$(OODIR)/program/; \
+ done; \
+ fi
+
+ rm -rf debian/tmp/pkg
+
+ # fix the desktop files....
+ cd $(PKGDIR)-common/$(OODIR)/share/xdg/ && \
+ for i in *.desktop; do \
+ sed -i -e "s/$(OOVER)//" $$i; \
+ done
+ifneq "$(RELEASE_BUILD)" "y"
+ cd $(PKGDIR)-common/$(OODIR)/share/xdg/ && \
+ for i in *.desktop; do \
+ sed -i -e "s/libreofficedev/libreoffice/" $$i; \
+ sed -i -e "s/LibreOfficeDev/LibreOffice/" $$i; \
+ done
+endif
+
+ # move desktop files to their correct packages (and correct dir)
+ # looks like it's pretty nonstandard to have symlinks; this breaks
+ # e.g. the generation from the appdata files. So get rid of those
+ # and move them to the libreoffice-* names after all.
+ for i in base calc draw impress math writer; do \
+ mkdir -p $(PKGDIR)-$$i/usr/share/applications; \
+ rm -f $(PKGDIR)-$$i/usr/share/applications/libreoffice-$$i.desktop; \
+ mv $(PKGDIR)-common/$(OODIR)/share/xdg/$$i.desktop \
+ $(PKGDIR)-$$i/usr/share/applications/libreoffice-$$i.desktop; \
+ done
+
+ # move pagein files
+ for i in calc draw impress writer; do \
+ mv $(PKGDIR)-core/$(OODIR)/program/pagein-$$i \
+ $(PKGDIR)-$$i/$(OODIR)/program; \
+ done
+
+ifeq "$(ENABLE_HELP)" "y"
+ # move help to /usr/share
+ ifeq "$(ENABLE_HTML_HELP)" "y"
+ mv $(PKGDIR)-help-common/usr/lib \
+ $(PKGDIR)-help-common/usr/share
+ endif
+ for iso in $(HELPISOS); do \
+ pkgiso=`echo $$iso | tr A-Z a-z`; \
+ if [ -e $(PKGDIR)-help-$$pkgiso/usr ]; then \
+ mv $(PKGDIR)-help-$$pkgiso/usr/lib \
+ $(PKGDIR)-help-$$pkgiso/usr/share; \
+ fi; \
+ done
+
+ifeq (sk,$(findstring sk,$(HELPISOS)))
+ # add fake sk help
+ mkdir -p $(PKGDIR)-help-sk/$(shell echo $(OODIR) | sed -e s/lib/share/)/help
+ ln -s cs \
+ $(PKGDIR)-help-sk/$(shell echo $(OODIR) | sed -e s/lib/share/)/help/sk
+endif
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ ifeq "$(PACKAGE_BASE)" "y"
+ # move sdbc_hsqldb.jar into -base (do the move
+ # to /usr/share/java here directly, we do it for the "rest"
+ # later
+ mkdir -p $(PKGDIR)-base/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes; \
+ mkdir -p $(PKGDIR)-base/$(OODIR)/program/classes; \
+ mv $(PKGDIR)-common/$(OODIR)/program/classes/sdbc_hsqldb.jar \
+ $(PKGDIR)-base/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes; \
+ ln -s $(shell echo /$(OODIR) | sed -e s/lib/share/)/program/classes/sdbc_hsqldb.jar \
+ $(PKGDIR)-base/$(OODIR)/program/classes/sdbc_hsqldb.jar
+ ifneq (,$(filter hsqldb, $(SYSTEM_STUFF)))
+ # fix the classpath (file:// breaks javahelper)
+ jh_classpath --classpath="$(HSQLDB_JAR) .." \
+ $(PKGDIR)-base/$(shell echo /$(OODIR) | sed -e s/lib/share/)/program/classes/sdbc_hsqldb.jar
+ endif
+ ifeq (,$(filter hsqldb, $(SYSTEM_STUFF)))
+ # we need this in -base. Otherwise we get unwanted package differences
+ # in the unstable version and backports which might use internal hsqldb
+ mkdir -p $(PKGDIR)-base/$(OODIR)/program/classes
+ mv $(PKGDIR)-common/$(OODIR)/program/classes/hsqldb.jar \
+ $(PKGDIR)-base/$(OODIR)/program/classes
+ endif
+ else
+ # remove sdbc_hsqldb.jar. otherwise ends up in -java-common
+ rm -f $(PKGDIR)-common/$(OODIR)/program/classes/sdbc_hsqldb.jar
+ endif
+endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ # move arch-indep stuff into a libreoffice-dev-common
+ mkdir -p $(PKGDIR)-dev-common/usr/include
+ mv $(PKGDIR)-dev/usr/include/libreoffice \
+ $(PKGDIR)-dev-common/usr/include
+ # except include/sal/typesizes.h
+ mkdir -p $(PKGDIR)-dev/usr/include/$(DEB_HOST_MULTIARCH)/libreoffice/sal
+ mkdir -p $(PKGDIR)-dev/usr/include/libreoffice/sal
+ mv $(PKGDIR)-dev-common/usr/include/libreoffice/sal/typesizes.h \
+ $(PKGDIR)-dev/usr/include/$(DEB_HOST_MULTIARCH)/libreoffice/sal
+ cd $(PKGDIR)-dev/usr/include/libreoffice/sal/ && \
+ ln -s /usr/include/$(DEB_HOST_MULTIARCH)/libreoffice/sal/typesizes.h
+ mkdir -p $(PKGDIR)-dev-common/usr/share/idl
+ mv $(PKGDIR)-dev/usr/share/idl/libreoffice \
+ $(PKGDIR)-dev-common/usr/share/idl
+ mkdir -p $(PKGDIR)-dev-common/$(OOSDKDIR)
+ mv $(PKGDIR)-dev/$(OOSDKDIR)/classes \
+ $(PKGDIR)-dev-common/$(OOSDKDIR)
+ mv $(PKGDIR)-dev/$(OOSDKDIR)/set* \
+ $(PKGDIR)-dev-common/$(OOSDKDIR)
+ # settings/dk.mk is not arch-indep
+ mkdir -p $(PKGDIR)-dev/$(OOSDKDIR)/settings
+ mv $(PKGDIR)-dev-common/$(OOSDKDIR)/settings/dk.mk \
+ $(PKGDIR)-dev/$(OOSDKDIR)/settings
+ mv $(PKGDIR)-dev/$(OOSDKDIR)/config* \
+ $(PKGDIR)-dev-common/$(OOSDKDIR)
+ mv $(PKGDIR)-dev/$(OOSDKDIR)/index.html* \
+ $(PKGDIR)-dev-common/$(OOSDKDIR)
+ ifeq "$(ENABLE_JAVA)" "y"
+ mkdir -p $(PKGDIR)-dev-common/usr/share/libreoffice/sdk
+ mv $(PKGDIR)-dev/usr/share/libreoffice/sdk/classes \
+ $(PKGDIR)-dev-common/usr/share/libreoffice/sdk
+ endif
+ mkdir -p $(PKGDIR)-dev-common/$(OODIR)/share/glade
+ mv $(PKGDIR)-common/$(OODIR)/share/glade/libreoffice-catalog.xml \
+ $(PKGDIR)-dev-common/$(OODIR)/share/glade
+else
+ rm -rf $(PKGDIR)-common/$(OODIR)/share/glade
+endif
+
+ ifeq "$(PACKAGE_SDK_DOCS)" "y"
+ # move SDK documentation into own package
+ rm -rf $(PKGDIR)-dev-doc
+ mkdir -p $(PKGDIR)-dev-doc/usr/share/doc/libreoffice
+ mv $(PKGDIR)-dev/usr/share/doc/libreoffice/sdk \
+ $(PKGDIR)-dev-doc/usr/share/doc/libreoffice
+ mkdir -p $(PKGDIR)-dev-doc/$(OOSDKDIR)
+ ln -sf /usr/share/doc/libreoffice/sdk/docs \
+ $(PKGDIR)-dev-doc/$(OOSDKDIR)/docs
+ mv $(PKGDIR)-dev/$(OOSDKDIR)/examples \
+ $(PKGDIR)-dev-doc/$(OOSDKDIR)
+ rm -f $(PKGDIR)-dev-doc/usr/share/doc/libreoffice/sdk/readme/LICENSE*
+ # and fix the symlink now dangling due to the move above
+ cd $(PKGDIR)-dev-common/$(OOSDKDIR) && \
+ ln -sf /usr/share/doc/libreoffice/sdk/index.html
+ endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ ifeq "$(ENABLE_JAVA)" "y"
+ # compat/safety symlink for SDK Java stuff moved to /usr/share
+ rm -f $(PKGDIR)-dev-common/$(OOSDKDIR)/classes
+ mkdir -p $(PKGDIR)-dev-common/$(OOSDKDIR)/classes/com/sun/star/lib/loader
+ cd $(PKGDIR)-dev-common/$(OOSDKDIR)/classes/com/sun/star/lib/loader && \
+ for i in $(CURDIR)/$(PKGDIR)-dev-common/$(shell echo $(OOSDKDIR) | sed -e s/lib/share/)/classes/com/sun/star/lib/loader/*.class; do \
+ ln -s `echo $$i | sed -e 's,$(CURDIR)/$(PKGDIR)-dev-common,,'` `basename $$i`; \
+ done
+ endif
+ chmod 644 $(PKGDIR)-dev-common/$(OOSDKDIR)/configure.pl
+ chmod 755 $(PKGDIR)-dev-common/$(OOSDKDIR)/setsdkenv_unix
+
+ # fix permissions
+ find $(PKGDIR)-dev-common/usr/share/idl/$(OODIRNAME) -type f -exec chmod 644 {} \;
+endif
+
+ifeq "$(ENABLE_EVO2)" "y"
+ mkdir -p $(PKGDIR)-evolution/$(OODIR)/presets/database
+ mkdir -p $(PKGDIR)-evolution/$(OODIR)/share/registry
+ mv $(PKGDIR)-common/$(OODIR)/presets/database/evolocal.odb \
+ $(PKGDIR)-evolution/$(OODIR)/presets/database
+endif
+
+ifeq "$(PACKAGE_BASE)" "y"
+ mkdir -p debian/python3-access2base/$(shell $(PYTHON) -c 'from distutils import sysconfig; print(sysconfig.get_python_lib())')
+ mv $(PKGDIR)-common/$(OODIR)/program/access2base.py \
+ debian/python3-access2base/$(shell $(PYTHON) -c 'from distutils import sysconfig; print(sysconfig.get_python_lib())')
+else
+ rm -rf $(PKGDIR)-common/$(OODIR)/share/basic/Access2Base
+ t=`mktemp -q`; grep -v Access2Base $(PKGDIR)-common/$(OODIR)/share/basic/dialog.xlc > \
+ $$t && mv $$t $(PKGDIR)-common/$(OODIR)/share/basic/dialog.xlc && rm -f $$t
+ t=`mktemp -q`; grep -v Access2Base $(PKGDIR)-common/$(OODIR)/share/basic/script.xlc > \
+ $$t && mv $$t $(PKGDIR)-common/$(OODIR)/share/basic/script.xlc && rm -f $$t
+ rm -f $(PKGDIR)-common/$(OODIR)/program/access2base.py
+endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ # move gengal stuff into -dev-gui
+ mkdir -p $(PKGDIR)-dev-gui/$(OODIR)/program
+ mv $(PKGDIR)-core/$(OODIR)/program/gengal.bin \
+ $(PKGDIR)-dev-gui/$(OODIR)/program
+ mv $(PKGDIR)-common/$(OODIR)/program/gengal \
+ $(PKGDIR)-dev-gui/$(OODIR)/program
+else
+ rm -f $(PKGDIR)-core/$(OODIR)/program/gengal.bin
+ rm -f $(PKGDIR)-common/$(OODIR)/program/gengal
+endif
+
+ifneq "$(ENABLE_REPORTBUILDER)" "y"
+ # unneeded. a no-Java arch, so the report-builder can't work anyway.
+ # (and we need to remove it here anyway as it otherwise would end up
+ # in -base/-core)
+ rm -rf $(PKGDIR)-report-builder
+ rm -f $(PKGDIR)-core/$(OODIR)/program/librpt*
+else
+ ifeq "$(PACKAGE_BASE)" "y"
+ # move rpt stuff into -report-builder-bin
+ rm -rf $(PKGDIR)-report-builder-bin
+ mkdir -p $(PKGDIR)-report-builder-bin/$(OODIR)/program
+ # it seems that --enable/--disable-reportbuiler affects the install
+ # location. sigh.
+ if [ -e $(PKGDIR)-core/$(OODIR)/program/librptlo.so ]; then \
+ i=core; else i=report-builder; fi; \
+ mv $(PKGDIR)-$$i/$(OODIR)/program/librpt* \
+ $(PKGDIR)-report-builder-bin/$(OODIR)/program
+ endif
+endif
+
+ # move uno_packages/cache to /var and create symlink for for
+ # documentation referencing it...
+ rm -rf $(PKGDIR)-common/$(OODIR)/share/uno_packages
+ mkdir -p $(PKGDIR)-core/var/spool/$(OODIRNAME)/uno_packages/cache
+ mkdir -p $(PKGDIR)-core/$(OODIR)/share/uno_packages
+ ln -s /var/spool/$(OODIRNAME)/uno_packages/cache \
+ $(PKGDIR)-core/$(OODIR)/share/uno_packages/cache
+ perl -pi -e \
+ 's,\$$UNO_SHARED_PACKAGES/cache,file:///var/spool/$(OODIRNAME)/uno_packages/cache,g' \
+ $(PKGDIR)-common/$(OODIR)/program/unorc
+ # What is this? unorc per default only mentiones
+ # share/uno_packages/cache...
+ rm -rf $(PKGDIR)-common/$(OODIR)/presets/uno_packages
+
+ifeq "$(ENABLE_FIREBIRD)" "y"
+ ifeq (,$(filter firebird, $(SYSTEM_STUFF)))
+ mkdir -p $(PKGDIR)-sdbc-firebird/$(OODIR)/share
+ mv $(PKGDIR)-common/$(OODIR)/share/firebird \
+ $(PKGDIR)-sdbc-firebird/$(OODIR)/share
+ endif
+endif
+
+ # move soffice.cfg files into the "correct" packages
+ for i in base calc draw impress math writer; do \
+ mkdir -p $(PKGDIR)-$$i/$(OODIR)/share/config/soffice.cfg/modules; \
+ mv $(PKGDIR)-common/$(OODIR)/share/config/soffice.cfg/modules/s$$i \
+ $(PKGDIR)-$$i/$(OODIR)/share/config/soffice.cfg/modules; \
+ if [ $$i = writer ]; then \
+ for i in sweb swform swreport swxform; do \
+ mv $(PKGDIR)-common/$(OODIR)/share/config/soffice.cfg/modules/$$i \
+ $(PKGDIR)-writer/$(OODIR)/share/config/soffice.cfg/modules; \
+ done; \
+ fi; \
+ if [ $$i = base ]; then \
+ for i in dbapp dbbrowser dbquery dbrelation dbtable dbtdata \
+ sabpilot sbibliography; do \
+ mv $(PKGDIR)-common/$(OODIR)/share/config/soffice.cfg/modules/$$i \
+ $(PKGDIR)-base/$(OODIR)/share/config/soffice.cfg/modules; \
+ done; \
+ fi; \
+ done
+ mv $(PKGDIR)-common/$(OODIR)/share/config/soffice.cfg/dbaccess \
+ $(PKGDIR)-base/$(OODIR)/share/config/soffice.cfg
+ mv $(PKGDIR)-common/$(OODIR)/share/config/soffice.cfg/writerperfect \
+ $(PKGDIR)-writer/$(OODIR)/share/config/soffice.cfg
+ mkdir -p $(PKGDIR)-report-builder/$(OODIR)/share/config/soffice.cfg/modules
+ mv $(PKGDIR)-common/$(OODIR)/share/config/soffice.cfg/modules/dbreport \
+ $(PKGDIR)-report-builder/$(OODIR)/share/config/soffice.cfg/modules
+
+ find debian/tmp ! -perm -200 | xargs -r chmod u+w
+
+ touch $@
+
+#
+# Generate maintainer scripts
+maintscripts: $(STAMP_DIR)/maintscripts
+$(STAMP_DIR)/maintscripts: $(wildcard debian/shell-lib*.sh) $(wildcard debian/*.preinst.in) $(wildcard debian/*.postinst.in) $(wildcard debian/*.prerm.in) $(wildcard debian/*.postrm.in) debian/control
+ dh_testdir
+
+ rm -f debian/*.{pre,post}{inst,rm}
+
+ # generate maintainer scripts from *.in
+ for PKG in $(PACKAGES); do \
+ for FILE in postinst postrm preinst prerm triggers; do \
+ MAINTSCRIPT=debian/$$PKG.$$FILE ; \
+ if [ -e $$MAINTSCRIPT.in ]; then \
+ sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' < $$MAINTSCRIPT.in | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' > $$MAINTSCRIPT; \
+ if grep -q "lool" $$MAINTSCRIPT.in; then \
+ cat debian/shell-lib-lool.sh >> $$MAINTSCRIPT; \
+ fi; \
+ if grep -E -q "(validate_extension|sync_extension)" $$MAINTSCRIPT.in; then \
+ cat debian/shell-lib-extensions.sh >> $$MAINTSCRIPT; \
+ fi; \
+ sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' < $$MAINTSCRIPT.in | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >> $$MAINTSCRIPT; \
+ perl -pi -e "s/\@LANGPACKISOS\@/$(LANGPACKISOS)/" $$MAINTSCRIPT; \
+ perl -pi -e "s,\@OODIR\@,$(OODIR),g" $$MAINTSCRIPT; \
+ fi; \
+ done; \
+ done
+ # create .ucf files for libreoffice-l10n-*. First generic ones
+ # libreoffice-l10n.ucf.in, but there also are CJK/CTL specific
+ # files, too...
+ for iso in $(filter-out en-US,$(LANGPACKISOS)); do \
+ pkgiso=`echo $$iso | tr \[:upper:\] \[:lower:\]`; \
+ cat debian/libreoffice-l10n.ucf.in \
+ | sed -e "s/\@ISO\@/$$iso/g" \
+ > debian/libreoffice-l10n-$$pkgiso.ucf; \
+ if [ -f instdir/share/registry/ctl_$$iso.xcd ]; then \
+ echo "/usr/lib/libreoffice/share/.registry/ctl_$$iso.xcd /etc/libreoffice/registry/ctl_$$iso.xcd" \
+ >> debian/libreoffice-l10n-$$pkgiso.ucf; \
+ fi; \
+ if [ -f instdir/share/registry/ctlseqcheck_$$iso.xcd ]; then \
+ echo "/usr/lib/libreoffice/share/.registry/ctlseqcheck_$$iso.xcd /etc/libreoffice/registry/ctlseqcheck_$$iso.xcd" \
+ >> debian/libreoffice-l10n-$$pkgiso.ucf; \
+ fi; \
+ if [ -f instdir/share/registry/cjk_$$iso.xcd ]; then \
+ echo "/usr/lib/libreoffice/share/.registry/cjk_$$iso.xcd /etc/libreoffice/registry/cjk_$$iso.xcd" \
+ >> debian/libreoffice-l10n-$$pkgiso.ucf; \
+ fi; \
+ done
+
+ touch $@
+
+# Install files generated by setup into package directories
+langpacks: $(STAMP_DIR)/langpacks
+$(STAMP_DIR)/langpacks: $(STAMP_DIR)/build-indep $(STAMP_DIR)/install-indep $(SOURCE_TREE)/bin/lo-xlate-lang
+
+ # remove empty uno_packages dirs somehow in the langpacks(?)
+ for iso in `echo $(LANGPACKISOS) | tr A-Z a-z`; do \
+ rm -rf $(PKGDIR)-l10n-$$iso/$(OODIR)/share/uno_packages; \
+ done
+
+ # remove ooo dirs somehow in the langpacks(?)
+ for iso in `echo $(LANGPACKISOS) | tr A-Z a-z`; do \
+ rm -rf $(PKGDIR)-l10n-$$iso/$(OODIR)/share/dict/ooo; \
+ done
+
+ # remove extra license files
+ for iso in `echo $(LANGPACKISOS) | tr A-Z a-z`; do \
+ rm -rf $(PKGDIR)-l10n-$$iso/$(OODIR)/licenses; \
+ rm -f $(PKGDIR)-l10n-$$iso/$(OODIR)/share/readme/LICENSE*; \
+ done
+
+ # remove extra readme files
+ for iso in `echo $(LANGPACKISOS) | tr A-Z a-z`; do \
+ rm -rf $(PKGDIR)-l10n-$$iso/$(OODIR)/readmes; \
+ rm -f $(PKGDIR)-l10n-$$iso/$(OODIR)/share/readme/README*; \
+ done
+
+ # remove empty help directories
+ for iso in `echo $(LANGPACKISOS) | tr A-Z a-z`; do \
+ rm -rf $(PKGDIR)-l10n-$$iso/$(shell echo $(OODIR) | sed -e s/lib/share/)/help; \
+ rm -rf $(PKGDIR)-l10n-$$iso/$(OODIR)/help; \
+ done
+
+ # install technical.dic
+ for iso in $(LANGPACKISOS); do \
+ if [ "$$iso" = "en-US" ]; then pkg=common; \
+ elif [ "$$iso" = "ca-valencia" ]; then pkg=l10n-ca; \
+ elif [ "$$iso" = "sr-Latn" ]; then pkg=l10n-sr; \
+ elif [ "$$iso" = "kmr-Latn" ]; then pkg=l10n-kmr; \
+ else pkg=l10n-`echo $$iso | tr A-Z a-z`; \
+ fi; \
+ mkdir -p $(PKGDIR)-$$pkg/$(OODIR)/share/wordbook/$$iso; \
+ install -m644 $(SOURCE_TREE)/extras/source/wordbook/technical.dic \
+ $(PKGDIR)-$$pkg/$(OODIR)/share/wordbook/$$iso/technical.dic; \
+ done
+
+ifeq "$(DEB_VENDOR)" "Debian"
+ # install Debian presentation template
+ otps=`cd debian/templates; echo *.otp`; \
+ for iso in $(LANGPACKISOS); do \
+ [ "$$iso" = "en-US" ] && continue; \
+ pkgiso=`echo $$iso | tr \[:upper:\] \[:lower:\]`; \
+ [ "$$pkgiso" = "ca-valencia" ] && pkgiso=ca; \
+ [ "$$pkgiso" = "sr-latn" ] && pkgiso=sr; \
+ [ "$$pkgiso" = "kmr-latn" ] && pkgiso=kmr; \
+ mkdir -p $(PKGDIR)-l10n-$$pkgiso/$(OODIR)/share/template/$$iso/presnt; \
+ for otp in $$otps; do \
+ ln -sf ../../en-US/presnt/$$otp \
+ $(PKGDIR)-l10n-$$pkgiso/$(OODIR)/share/template/$$iso/presnt/$$odt; \
+ done; \
+ done
+endif
+
+ifeq (he,$(findstring he,$(LANGPACKISOS)))
+ perl -pi -e 's#<prop oor:name="CTLSequenceChecking"><value>true</value></prop>#<prop oor:name="CTLSequenceChecking"><value>false</value></prop>#' $(PKGDIR)-l10n-he/$(OODIR)/share/registry/ctl_he.xcd
+endif
+
+ touch $@
+
+# Install files generated by setup into arch-dependent package directories
+install-arch: $(STAMP_DIR)/install-arch
+$(STAMP_DIR)/install-arch: $(STAMP_DIR)/build-arch $(STAMP_DIR)/install-common
+ dh_testdir
+ dh_testroot
+ umask 022
+
+ifeq "$(ENABLE_JAVA)" "y"
+ mkdir -p debian/ure-java/usr/share/java
+ mkdir -p debian/ure-java/$(OODIR)/program/classes
+ mv debian/ure/$(OODIR)/program/classes/java_uno.jar \
+ debian/ure-java/usr/share/java
+ cd debian/ure-java/$(OODIR)/program/classes && \
+ ln -sf /usr/share/java/java_uno.jar java_uno.jar
+ # remove libraries split out to extra packages
+ # will be installed using mh_* or jh_* in install-indep
+ for i in juh jurt ridl unoloader libreoffice; do \
+ rm debian/ure/$(OODIR)/program/classes/$$i.jar; \
+ done
+ for i in libjuh.so javaldx libjpipe.so libjuhx.so \
+ javavendors.xml JREProperties.class \
+ jvmfwk3rc libjava_uno.so; do \
+ mv debian/ure/$(OODIR)/program/$$i \
+ debian/ure-java/$(OODIR)/program; \
+ done
+endif
+ # and the public libs to their respective packages
+ for i in sal cppu; do \
+ mkdir -p debian/libuno-$${i}3/$(OODIR)/program; \
+ mkdir -p debian/libuno-$${i}3/usr/lib/$(DEB_HOST_MULTIARCH); \
+ mv debian/ure/$(OODIR)/program/libuno_$${i}.so.3 \
+ debian/libuno-$${i}3/$(OODIR)/program; \
+ ln -sf /$(OODIR)/program/`basename libuno_$$i.so.3` debian/libuno-$${i}3/usr/lib/$(DEB_HOST_MULTIARCH)/`basename libuno_$$i.so.3`; \
+ done
+ for i in salhelpergcc3 cppuhelpergcc3 purpenvhelpergcc3; do \
+ mkdir -p debian/libuno-$${i}-3/$(OODIR)/program; \
+ mkdir -p debian/libuno-$${i}-3/usr/lib/$(DEB_HOST_MULTIARCH); \
+ mv debian/ure/$(OODIR)/program/libuno_$${i}.so.3 \
+ debian/libuno-$${i}-3/$(OODIR)/program; \
+ ln -sf /$(OODIR)/program/`basename libuno_$$i.so.3` debian/libuno-$${i}-3/usr/lib/$(DEB_HOST_MULTIARCH)/`basename libuno_$$i.so.3`; \
+ done
+ # we also need libxmlreaderlo.so, libreglo.so and libunoidllo.so (libuno_cppuhelpergcc3.so.3
+ # needs it) and libstorelo.so (libreglo.so needs it)
+ mkdir -p debian/uno-libs-private/$(OODIR)/program
+ for i in libxmlreaderlo.so libreglo.so libstorelo.so libunoidllo.so; do \
+ mv debian/ure/$(OODIR)/program/$$i \
+ debian/uno-libs-private/$(OODIR)/program; \
+ done
+
+
+ifeq "$(BUILD_PLASMA)" "y"
+ # install files for "create new" ...
+ mkdir -p $(PKGDIR)-plasma/usr/share/templates/.source
+ for i in $(SOURCE_TREE)/extras/source/shellnew/*; do \
+ cp $$i $(PKGDIR)-plasma/usr/share/templates/.source/`basename $$i`; \
+ done
+ cat debian/templates/soffice-template.desktop.in \
+ | sed -e "s/@APP@/Writer/" \
+ | sed -e "s/@EXT@/odt/" \
+ | sed -e "s/@TYPE@/text/" \
+ > $(PKGDIR)-plasma/usr/share/templates/soffice.odt.desktop
+ cat debian/templates/soffice-template.desktop.in \
+ | sed -e "s/@APP@/Calc/" \
+ | sed -e "s/@EXT@/ods/" \
+ | sed -e "s/@TYPE@/spreadsheet/" \
+ > $(PKGDIR)-plasma/usr/share/templates/soffice.ods.desktop
+ cat debian/templates/soffice-template.desktop.in \
+ | sed -e "s/@APP@/Impress/" \
+ | sed -e "s/@EXT@/odp/" \
+ | sed -e "s/@TYPE@/presentation/" \
+ > $(PKGDIR)-plasma/usr/share/templates/soffice.odp.desktop
+ cat debian/templates/soffice-template.desktop.in \
+ | sed -e "s/@APP@/Draw/" \
+ | sed -e "s/@EXT@/odg/" \
+ | sed -e "s/@TYPE@/drawing/" \
+ > $(PKGDIR)-plasma/usr/share/templates/soffice.odg.desktop
+endif
+
+ifeq "$(ENABLE_EVO2)" "y"
+ mkdir -p -m755 $(PKGDIR)-evolution/$(OODIR)/program
+ mv $(PKGDIR)-gnome/$(OODIR)/program/libevoab*.so $(PKGDIR)-evolution/$(OODIR)/program
+ mv $(PKGDIR)-gnome/$(OODIR)/share/registry/evoab.xcd \
+ $(PKGDIR)-evolution/$(OODIR)/share/registry
+endif
+
+ifeq "$(ENABLE_GUI)" "y"
+ ifeq "$(BUILD_GTK3)" "y"
+ # split out gtk stuff
+ mkdir -p $(PKGDIR)-gtk3/$(OODIR)/program/
+ mkdir -p debian/liblibreofficekitgtk/$(OODIR)/program
+ mv $(PKGDIR)-gnome/$(OODIR)/program/*gtk3* $(PKGDIR)-gtk3/$(OODIR)/program/
+ ifeq "$(ENABLE_PACKAGEKIT)" "y"
+ # FIXME: ended up in -gtk3 due to a bug. should it stay there or be in -gnome?
+ mv $(PKGDIR)-gnome/$(OODIR)/program/liblosessioninstalllo.so \
+ $(PKGDIR)-gtk3/$(OODIR)/program/
+ endif
+ mv $(PKGDIR)-core/$(OODIR)/program/liblibreofficekitgtk.so \
+ debian/liblibreofficekitgtk/$(OODIR)/program
+ endif
+ ifeq "$(BUILD_GTK4)" "y"
+ mkdir -p $(PKGDIR)-gtk4/$(OODIR)/program/
+ mv $(PKGDIR)-gnome/$(OODIR)/program/*gtk4* $(PKGDIR)-gtk4/$(OODIR)/program
+ endif
+endif
+
+ifeq "$(PACKAGE_BASE)" "y"
+ mkdir -p $(PKGDIR)-base-core/$(OODIR)/program
+ mv $(PKGDIR)-base/$(OODIR)/program/libdbalo.so \
+ $(PKGDIR)-base-core/$(OODIR)/program
+ mv $(PKGDIR)-base/$(OODIR)/program/libdbahsqllo.so \
+ $(PKGDIR)-base-core/$(OODIR)/program
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ ifneq (,$(filter hsqldb, $(SYSTEM_STUFF)))
+ # link to system hsqldb
+ mkdir -p $(PKGDIR)-base/$(OODIR)/program/classes
+ ln -sf $(HSQLDB_JAR) \
+ $(PKGDIR)-base/$(OODIR)/program/classes/hsqldb.jar
+ endif
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ # move the officebean so into libreoffice-officebean
+ # the jar will be installed (into libofficebean-java)
+ # using mh_ in install-indep
+ rm -rf debian/libofficebean-java
+ mkdir -p -m755 debian/libofficebean-java/usr/lib/jni
+ mkdir -p -m755 debian/libofficebean-java/$(OODIR)/program
+ mv $(PKGDIR)-core/$(OODIR)/program/libofficebean.so \
+ debian/libofficebean-java/usr/lib/jni
+ cd debian/libofficebean-java/$(OODIR)/program && \
+ ln -s /usr/lib/jni/libofficebean.so libofficebean.so
+ sed -e s/@version@/$(shell echo $(DEB_VERSION_UPSTREAM) | cut -d~ -f1)/ \
+ < $(SOURCE_TREE)/bean/pom.officebean.xml > debian/pom.officebean.xml
+ mh_installpoms -plibofficebean-java
+ mh_installjar -plibofficebean-java -l debian/pom.officebean.xml instdir/program/classes/officebean.jar
+ # create symlink where LO expects it
+ mkdir -p $(CURDIR)/debian/libofficebean-java/$(OODIR)/program/classes
+ cd $(CURDIR)/debian/libofficebean-java/$(OODIR)/program/classes && \
+ ln -s /usr/share/java/officebean.jar officebean.jar
+ # fix up Class-Path
+ jh_classpath --classpath="libreoffice.jar" \
+ debian/libofficebean-java/usr/share/java/officebean.jar
+endif
+
+ mkdir -p -m755 $(PKGDIR)-base/usr/share/applications \
+ $(PKGDIR)-core/usr/share/applications
+
+ sed -i -e 's/Education;Science;//' $(PKGDIR)-math/usr/share/applications/libreoffice-math.desktop
+ # invalid, according to lintian. make it shut up.
+ for i in writer calc impress draw math base; do \
+ perl -pi -e 's/Application;//; s/X-Red-Hat-Base;//; s/X-SuSE-Core-Office;//; s/X-MandrivaLinux-.*;//;' $(PKGDIR)-$$i/usr/share/applications/libreoffice-$$i.desktop; \
+ done
+
+ifeq "$(ENABLE_PYTHON)" "y"
+ # PyUNO packaging
+ install -d $(PYTHON_SITE)
+ # prepend stuff so that it works when the module is not in LOs
+ # directories but in $(PYTHON_SITE). Can't be a patch (anymore)
+ # as otherwise the python-based unittests fail miserably.
+ echo "import sys, os" > $(PYTHON_SITE)/uno.py
+ echo "sys.path.append('/$(OODIR)/program')" >> $(PYTHON_SITE)/uno.py
+ echo "os.putenv('URE_BOOTSTRAP', 'vnd.sun.star.pathname:/$(OODIR)/program/fundamentalrc')" >> $(PYTHON_SITE)/uno.py
+ cat debian/python3-uno/$(OODIR)/program/uno.py >> $(PYTHON_SITE)/uno.py
+ rm -f debian/python3-uno/$(OODIR)/program/uno.py
+ mv debian/python3-uno/$(OODIR)/program/unohelper.py $(PYTHON_SITE)
+ touch debian/python3-uno/$(OODIR)/program/pythonloader.unorc
+ chmod u+w debian/python3-uno/$(OODIR)/program/pythonloader.unorc
+ ( echo 'PYTHONHOME=file:///usr/lib/python$(PYMAJOR).$(PYMINOR)' ;\
+ echo 'PYTHONPATH=$$PYTHONHOME $$PYTHONHOME/site-packages $$PYTHONHOME/lib-dynload $$PYTHONHOME/lib-tk $$ORIGIN' \
+ ) >> debian/python3-uno/$(OODIR)/program/pythonloader.unorc
+ chmod u-w debian/python3-uno/$(OODIR)/program/pythonloader.unorc
+ ifeq "$(ENABLE_SCRIPT_PROVIDER_PYTHON)" "y"
+ rm -f debian/libreoffice-script-provider-python/$(OODIR)/share/extensions/script-provider-for-python/registration/LICENSE
+ endif
+
+ mkdir -p debian/python3-uno/usr/share/doc/python3-uno
+ cp -r $(SOURCE_TREE)/pyuno/demo \
+ debian/python3-uno/usr/share/doc/python3-uno; \
+ for i in $(SOURCE_TREE)/pyuno/doc/*; do \
+ cp $$i debian/python3-uno/usr/share/doc/python3-uno; \
+ done
+ cd debian/python3-uno/usr/share/doc/python3-uno && \
+ find . -type d -name "CVS" | xargs -r rm -rf
+endif
+
+ # should be empty now, remove if there
+ rm -rf $(PKGDIR)-core/$(OODIR)/ure
+
+ifeq "$(PACKAGE_SDK)" "y"
+ # create wrapper scripts
+ cd $(PKGDIR)-dev/$(OOSDKDIR)/bin && \
+ for i in *; do \
+ mv $$i $$i.bin && \
+ ( \
+ echo "#!/bin/sh"; \
+ echo "# wrapper script for OOos SDK programs"; \
+ echo ""; \
+ echo 'LD_LIBRARY_PATH=/$(OODIR)/program /$(OOSDKDIR)/bin/`basename $$0`.bin "$$@"'; \
+ ) > $$i; \
+ chmod 755 $$i; \
+ done
+ # remove symlink, it should be in -dev-doc
+ cd $(PKGDIR)-dev/$(OOSDKDIR) && \
+ rm docs
+
+ rm -f $(PKGDIR)-dev/usr/share/doc/libreoffice/sdk/readme/LICENSE.gz
+endif
+
+ # remove empty resource directories
+ for i in draw base writer impress calc math; do \
+ rm -rf $(PKGDIR)-$$i/$(OODIR)/program/resource; \
+ done
+
+ifeq "$(ENABLE_JAVA)" "y"
+ mkdir -p $(PKGDIR)-sdbc-hsqldb/$(OODIR)/program
+ mkdir -p $(PKGDIR)-sdbc-hsqldb/usr/lib/libreoffice/program/classes
+ mkdir -p $(PKGDIR)-sdbc-hsqldb/usr/share/libreoffice/program/classes
+ mv $(PKGDIR)-base/$(OODIR)/program/libhsqldb.so \
+ $(PKGDIR)-sdbc-hsqldb/$(OODIR)/program
+ ifneq (,$(filter hsqldb, $(SYSTEM_STUFF)))
+ mv $(PKGDIR)-base/usr/lib/libreoffice/program/classes/hsqldb.jar \
+ $(PKGDIR)-sdbc-hsqldb/usr/lib/libreoffice/program/classes
+ endif
+ for i in lib share; do \
+ mv $(PKGDIR)-base/usr/$$i/libreoffice/program/classes/sdbc_hsqldb.jar \
+ $(PKGDIR)-sdbc-hsqldb/usr/$$i/libreoffice/program/classes; \
+ done
+endif
+ifeq "$(ENABLE_FIREBIRD)" "y"
+ mkdir -p $(PKGDIR)-sdbc-firebird/$(OODIR)/program
+ mv $(PKGDIR)-core/$(OODIR)/program/libfirebird_sdbclo.so \
+ $(PKGDIR)-sdbc-firebird/$(OODIR)/program
+ ifeq (,$(filter firebird, $(SYSTEM_STUFF)))
+ for i in libEngine12.so libfbclient.so.2; do \
+ mv $(PKGDIR)-core/$(OODIR)/program/$$i \
+ $(PKGDIR)-sdbc-firebird/$(OODIR)/program; \
+ done
+ endif
+endif
+ mkdir -p $(PKGDIR)-sdbc-mysql/$(OODIR)/program
+ mv $(PKGDIR)-base/$(OODIR)/program/libmysqlclo.so \
+ $(PKGDIR)-sdbc-mysql/$(OODIR)/program
+
+ mkdir -p $(PKGDIR)-base-drivers/$(OODIR)/program
+ for i in `find $(PKGDIR)-base/$(OODIR)/program/ -name "*.so" \
+ -a \! -name "libdbulo*" -a \! -name "libdbaxml*" -a \! -name "libdbp*" -a \! -name "libabplo.so"`; do \
+ mv $$i \
+ $(PKGDIR)-base-drivers/$(OODIR)/program; \
+ done
+
+ifeq "$(BUILD_NOGUI_PACKAGES)" "y"
+ # create no-GUI packages
+ for p in $(shell dh_listpackages -a | grep nogui | grep -v libreoffice-nogui | cut -d- -f2- | sed -e s/-nogui// | xargs); do \
+ rm -rf $(PKGDIR)-$$p-nogui; \
+ cp -ra $(PKGDIR)-$$p $(PKGDIR)-$$p-nogui; \
+ for i in $(PKGDIR)-$$p-nogui/$(OODIR)/program/*; do \
+ if [ -e instdir-nogui/program/`basename $$i` ]; then \
+ cp -v instdir-nogui/program/`basename $$i` \
+ $(PKGDIR)-$$p-nogui/$(OODIR)/program; \
+ else \
+ rm -fv $(PKGDIR)-$$p-nogui/$(OODIR)/program/`basename $$i`; \
+ fi; \
+ done; \
+ done
+ # remove lib*uilo.so in -nogui
+ find debian/libreoffice-*-nogui/$(OODIR)/program -name "lib*uilo.so" -a ! -name "libuuilo.so" \
+ -exec rm {} \;
+ rm -f debian/libreoffice-base-nogui/$(OODIR)/program/libdbulo.so
+ # and (no UI, so not needed) not needed .desktop and .ui files
+ find debian/libreoffice-*-nogui/usr/share/applications/*.desktop -exec rm {} \;
+ find debian/libreoffice-*-nogui/$(OODIR)/share/config/soffice.cfg -name "*.ui" -exec rm {} \;
+ # unneeded launchers
+ find debian/libreoffice-*-nogui/usr/bin/lo* -exec rm {} \;
+ # otherwise we get errors since the launchers are missing
+ find debian/libreoffice-*-nogui/usr/share/metainfo/libreoffice-*.appdata.xml -exec rm {} \;
+
+ # OGLTrans.so is not in -impress-nogui so we don't need this either
+ rm -f debian/libreoffice-impress-nogui/$(OODIR)/share/registry/ogltrans.xcd
+ rm -f debian/libreoffice-impress-nogui/$(OODIR)/share/config/soffice.cfg/simpress/transitions-ogl.xml
+ rm -rf debian/libreoffice-impress-nogui/$(OODIR)/opengl
+endif
+
+ rm -f *.bug-script
+ for i in $(ARCH_DEP_PACKAGES); do \
+ if [ -e debian/$$i.bug-script.in ]; then \
+ cat debian/$$i.bug-script.in \
+ | sed -e "s/@PLATFORMID@/$(PLATFORMID)/" \
+ | sed -e "s/@RTL_OS@/$(RTL_OS)/" \
+ | sed -e "s/@RTL_ARCH@/$(RTL_ARCH)/" \
+ | sed -e "s/@OOVER@/$(OOVER)/" \
+ > debian/$$i.bug-script; \
+ fi ;\
+ if [ -e debian/$$i.ucf ]; then \
+ if [ ! -e debian/$$i.bug-script.in ]; then \
+ printf "#!/bin/sh\n\n" > debian/$$i.bug-script; \
+ fi ;\
+ echo "ucfq $$i >&3" >> debian/$$i.bug-script; \
+ fi ;\
+ done
+ for i in $(ARCH_DEP_PACKAGES); do \
+ if [ -e debian/$$i.bug-control ]; then \
+ if grep -q "^report-with:" debian/$$i.bug-control; then \
+ extra_packages=`grep "^report-with:" debian/$$i.bug-control | sed -e "s/^report-with: //"`; \
+ for p in $$extra_packages; do \
+ if [ $$i != $$p ] && [ -f debian/$$p.bug-script ] && ! echo $$added_packages | grep -q $$p && \
+ ! grep -q bug\/$$p\/script debian/$$i.bug-script; then \
+ printf "#!/bin/sh\n" >> debian/$$i.bug-script; \
+ printf "if [ -x /usr/share/bug/$$p/script ]; then /usr/share/bug/$$p/script; fi\n" >> debian/$$i.bug-script; \
+ added_packages="$$added_packages $$p"; \
+ fi; \
+ done; \
+ added_packages=; \
+ fi; \
+ fi; \
+ done
+ # generate .links files from *.in
+ for PKG in $(ARCH_DEP_PACKAGES); do \
+ LINKS=debian/$$PKG.links ; \
+ if [ -e $$LINKS.in ]; then \
+ sed -e "s#\@OODIR\@#$(OODIR)#g" \
+ < $$LINKS.in > $$LINKS ; \
+ fi; \
+ done
+
+ # make config xml "pretty" to make ucf --three-way work.
+ for p in $(ARCH_DEP_PACKAGES); do \
+ for i in `find debian/$$p/$(OODIR)/share/registry -name "*.xcd"`; do \
+ t=`mktemp -q`; \
+ xmllint --pretty 1 $$i > $$t; \
+ mv $$t $$i; \
+ done; \
+ done
+ # and "hide" the ucf source registry; makes it less confusing for
+ # people who do know /usr/lib/libreoffice/share/registry.
+ for p in $(ARCH_DEP_PACKAGES); do \
+ for i in `find debian/$$p -type d -wholename "*$(OODIR)/share/registry"`; do \
+ mv $$i `echo $$i | sed -e s/registry/.registry/`; \
+ done; \
+ done
+
+ touch $@
+
+# Install files generated by setup into arch-independent package directories
+install-indep: $(STAMP_DIR)/install-indep
+#$(STAMP_DIR)/install-indep: debian/libreoffice.install
+#$(STAMP_DIR)/install-indep: debian/libreoffice.dirs
+$(STAMP_DIR)/install-indep: $(STAMP_DIR)/build-indep $(STAMP_DIR)/install-common
+ dh_testdir
+ dh_testroot
+
+ifneq "$(shell echo $(USE_GSTREAMER) | grep -q y && echo 0)" "0"
+ # sound doesn't work anyway, remove the .wav files to save space
+ rm -rf $(PKGDIR)-common/$(OODIR)/share/gallery/sounds
+ rm -f $(PKGDIR)-common/$(OODIR)/share/gallery/sg9.*
+endif
+
+ rm -f $(PKGDIR)-common/$(OODIR)/program/oo_product.bmp
+
+ # install openoffice-xlate-lang
+ install -d -m755 $(PKGDIR)-common/usr/share/$(OODIRNAME)/bin
+ install -m755 $(SOURCE_TREE)/bin/lo-xlate-lang \
+ $(PKGDIR)-common/usr/share/$(OODIRNAME)/bin
+
+ifeq "$(ENABLE_HELP)" "n"
+ # when we don't build helpcontent2 here we are missing helpxsl.zip so
+ # this file doesn't get installed either. Do it manually..
+ mkdir -p -m755 $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/help && \
+ cp $(SOURCE_TREE)/xmlhelp/util/main_transform.xsl \
+ $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/help
+ cp $(SOURCE_TREE)/xmlhelp/util/idxcaption.xsl \
+ $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/help
+ cp $(SOURCE_TREE)/xmlhelp/util/idxcontent.xsl \
+ $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/help
+endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ ifeq "$(PACKAGE_SDK_DOCS)" "y"
+ rm -f $(PKGDIR)-dev-doc/usr/share/doc/libreoffice-dev-doc/LICENSE
+ perl -pi -e 's,license.html,http://www.gnu.org/licenses/lgpl.html,' \
+ $(PKGDIR)-dev-doc/$(OOSDKDIR)/index.html
+ find $(PKGDIR)-dev-doc/$(OODIR)/sdk/examples -type f -exec chmod 644 {} \;
+ endif
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ # move common Java stuff to -java-common
+ rm -rf $(PKGDIR)-java-common
+ mkdir -p $(PKGDIR)-java-common/$(OODIR)/program/classes
+ mkdir -p $(PKGDIR)-java-common/$(OODIR)/share/Scripts
+ mkdir -p $(PKGDIR)-java-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes
+ mv $(PKGDIR)-common/$(OODIR)/share/Scripts/java \
+ $(PKGDIR)-java-common/$(OODIR)/share/Scripts
+ # remove unoil and officebean; installed later/in install-arch by mh_* and in extra packages anyway
+ rm -f $(PKGDIR)-common/$(OODIR)/program/classes/unoil.jar
+ rm -f $(PKGDIR)-common/$(OODIR)/program/classes/officebean.jar
+ # and move the rest
+ mv $(PKGDIR)-common/$(OODIR)/program/classes/* \
+ $(PKGDIR)-java-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes
+ cd $(PKGDIR)-java-common/$(OODIR)/program/classes && \
+ for i in $(CURDIR)/$(PKGDIR)-java-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes/*; do \
+ case "`basename $$i`" in aportisdoc.jar|pexcel.jar|pocketword.jar) continue ;; \
+ *) ln -s `echo $$i | sed -e 's,$(CURDIR)/$(PKGDIR)-java-common,,'` `basename $$i` ;; esac; \
+ done
+
+ifeq "$(BUILD_TEST_PACKAGES)" "y"
+ ifeq "$(ENABLE_JUNIT4)" "y"
+ rm -rf $(PKGDIR)-subsequentcheckbase
+ mkdir -p $(PKGDIR)-subsequentcheckbase/$(OODIR)/program/classes/
+ for jar in OOoRunner test test-tools ConnectivityTools; do \
+ cp workdir/Jar/$$jar.jar $(PKGDIR)-subsequentcheckbase/$(OODIR)/program/classes/; \
+ done
+ # fix Class-Path: to not include build path
+ jh_classpath --classpath="libreoffice.jar OOoRunner.jar file:///usr/share/java/junit4.jar "\
+ $(PKGDIR)-subsequentcheckbase/$(OODIR)/program/classes/test.jar
+ endif
+
+ rm -rf $(PKGDIR)-smoketest-data
+ mkdir -p $(PKGDIR)-smoketest-data/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes
+ mkdir -p $(PKGDIR)-smoketest-data/$(OODIR)/program/classes
+ mv $(PKGDIR)-java-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes/smoketest.jar \
+ $(PKGDIR)-smoketest-data/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes
+ mv $(PKGDIR)-java-common/$(OODIR)/program/classes/smoketest.jar \
+ $(PKGDIR)-smoketest-data/$(OODIR)/program/classes
+ rm -f $(PKGDIR)-java-common/$(OODIR)/program/classes/smoketest.jar
+
+ mkdir -p $(PKGDIR)-smoketest-data/usr/share/libreoffice
+ cp workdir/Extension/TestExtension.oxt \
+ $(PKGDIR)-smoketest-data/usr/share/libreoffice
+ cp workdir/Zip/smoketestdoc.sxw \
+ $(PKGDIR)-smoketest-data/usr/share/libreoffice
+endif
+endif
+
+ # fix permissions
+ for i in editpic poll savepic show webcast; do \
+ chmod 755 $(PKGDIR)-common/$(OODIR)/share/config/webcast/$$i.pl; \
+ done
+ chmod 644 $(PKGDIR)-common/$(OODIR)/CREDITS.fodt
+ # Do we really need this (ALV2 mandating it) or can this go?
+ chmod 644 $(PKGDIR)-common/$(OODIR)/NOTICE
+
+ # set PYTHONPATH in unopkg
+ perl -pi -e 's,unset XENVIRONMENT,unset XENVIRONMENT\n\nexport PYTHONPATH=\"/$(OODIR)/program\"\n\n,' \
+ $(PKGDIR)-common/$(OODIR)/program/unopkg
+
+ mkdir -p debian/fonts-opensymbol/usr/share/fonts/truetype/libreoffice
+ mv $(PKGDIR)-common/$(OODIR)/share/fonts/truetype/opens___.ttf \
+ debian/fonts-opensymbol/usr/share/fonts/truetype/libreoffice
+ # this is double-installed since https://cgit.freedesktop.org/libreoffice/core/commit/?id=25f4cc12fb59284392914c93a0ae6ad199ecc069
+ rm -f $(PKGDIR)-common/$(OODIR)/program/resource/common/fonts/opens___.ttf
+ mkdir -p debian/fonts-opensymbol/etc/fonts/conf.d
+ mkdir -p debian/fonts-opensymbol/usr/share/fontconfig/conf.avail
+ # this only works with --without-fonts. Otherwise we get all stuff here,
+ # not only the Symbol->OpenSymbol part... But we don't support --with-fonts
+ # build here right now anyway.
+ mv $(PKGDIR)-common/$(OODIR)/share/fonts/truetype/fc_local.conf \
+ debian/fonts-opensymbol/usr/share/fontconfig/conf.avail/30-opensymbol.conf
+ cd debian/fonts-opensymbol/etc/fonts/conf.d/ && \
+ ln -s /usr/share/fontconfig/conf.avail/30-opensymbol.conf
+
+ # remove extra license files
+ rm -rf $(PKGDIR)-common/$(OODIR)/licenses
+ rm -f $(PKGDIR)-common/$(OODIR)/share/readme/LICENSE*
+ rm -f $(PKGDIR)-common/$(OODIR)/THIRDPARTYLICENSEREADME.html
+ rm -f $(PKGDIR)-common/$(OODIR)/LICENSE
+
+ # remove extra readme files
+ rm -rf $(PKGDIR)-common/$(OODIR)/readmes
+ rm -f $(PKGDIR)-common/$(OODIR)/share/readme/README*
+ rm -f $(PKGDIR)-common/$(OODIR)/README.html
+ rm -f $(PKGDIR)-common/$(OODIR)/README
+
+ # URE got moved to /usr/lib, so this is obsolete
+ for i in ure/lib ure; do \
+ if [ -e $(PKGDIR)-common/$(OODIR)/$$i ]; then \
+ rmdir $(PKGDIR)-common/$(OODIR)/$$i; \
+ fi; \
+ done
+
+ # move psprint.conf into /etc. for non-GUI it somehow is not installed
+ # do do it manually. FIXME: is psprint.conf still a thing?
+ifeq "$(ENABLE_GUI)" "y"
+ mkdir -p $(PKGDIR)-common/etc/$(OODIRNAME)
+ mv $(PKGDIR)-common/$(OODIR)/share/psprint/psprint.conf \
+ $(PKGDIR)-common/etc/$(OODIRNAME)
+else
+ mkdir -p $(PKGDIR)-common/etc/$(OODIRNAME)
+ mkdir -p $(PKGDIR)-common/$(OODIR)/share/psprint
+ install -m644 vcl/unx/generic/printer/configuration/psprint.conf \
+ $(PKGDIR)-common/etc/$(OODIRNAME)
+endif
+ ln -s /etc/$(OODIRNAME)/psprint.conf \
+ $(PKGDIR)-common/$(OODIR)/share/psprint/psprint.conf
+
+ # prepare a fake sofficerc in the place where OOo expects it
+ # which does nothing except reference the "normal" one
+ # which we put into /etc
+ mkdir -p $(PKGDIR)-common/etc/$(OODIRNAME)
+ mv $(PKGDIR)-common/$(OODIR)/program/sofficerc \
+ $(PKGDIR)-common/etc/$(OODIRNAME)/sofficerc
+ ( \
+ echo "# *DO NOT* CHANGE THIS FILE. IT ONLY TAKES THE SETTINGS FROM"; \
+ echo "# /etc/$(OODIRNAME)/sofficerc. CHANGE THAT FILE IF YOU"; \
+ echo "# REALLY WANT TO CHANGE SOMETHING."; \
+ echo "FHS_CONFIG_FILE=file:///etc/$(OODIRNAME)/sofficerc"; \
+ echo "" >> $(PKGDIR)-common/$(OODIR)/program/sofficerc; \
+ ) > $(PKGDIR)-common/$(OODIR)/program/sofficerc
+ cat $(PKGDIR)-common/etc/$(OODIRNAME)/sofficerc \
+ | perl -p -e 's/(.*)=(.*)/$$1=\$${\$$FHS_CONFIG_FILE:Bootstrap:$$1}/' \
+ >> $(PKGDIR)-common/$(OODIR)/program/sofficerc
+ # except for URE_BOOTSTRAP...
+ TMP=`mktemp -q`; \
+ grep -v URE_BOOTSTRAP $(PKGDIR)-common/$(OODIR)/program/sofficerc > $$TMP && mv $$TMP $(PKGDIR)-common/$(OODIR)/program/sofficerc && \
+ grep URE_BOOTSTRAP $(PKGDIR)-common/etc/$(OODIRNAME)/sofficerc >> $(PKGDIR)-common/$(OODIR)/program/sofficerc && \
+ grep -v URE_BOOTSTRAP $(PKGDIR)-common/etc/$(OODIRNAME)/sofficerc > $$TMP && mv $$TMP $(PKGDIR)-common/etc/$(OODIRNAME)/sofficerc
+
+ install -m 644 debian/soffice.sh \
+ $(PKGDIR)-common/etc/$(OODIRNAME)/soffice.sh
+
+ set -e; \
+ for i in $(IMAGES); do \
+ z=images_$$i.zip; p=$$i; \
+ if [ "$$i" = "colibre_dark" ]; then p=colibre; fi; \
+ if [ "$$i" = "colibre_dark_svg" ]; then p=colibre; fi; \
+ if [ "$$i" = "colibre_svg" ]; then p=colibre; fi; \
+ if [ "$$i" = "breeze_dark" ]; then p=breeze; fi; \
+ if [ "$$i" = "breeze_dark_svg" ]; then p=breeze; fi; \
+ if [ "$$i" = "breeze_svg" ]; then p=breeze; fi; \
+ if [ "$$i" = "elementary_svg" ]; then p=elementary; fi; \
+ if [ "$$i" = "sifr_dark" ]; then p=sifr; fi; \
+ if [ "$$i" = "sifr_dark_svg" ]; then p=sifr; fi; \
+ if [ "$$i" = "karasa_jaga" ]; then p=karasa-jaga; fi; \
+ if [ "$$i" = "sukapura_svg" ]; then p=sukapura; fi; \
+ mkdir -p $(PKGDIR)-style-$$p/$(shell echo $(OODIR) | sed -e s/lib/share/)/share/config; \
+ mv $(PKGDIR)-common/$(OODIR)/share/config/$$z \
+ $(PKGDIR)-style-$$p/$(shell echo $(OODIR) | sed -e s/lib/share/)/share/config/; \
+ mkdir -p $(PKGDIR)-style-$$p/$(OODIR)/share/config; \
+ ln -s /$(shell echo $(OODIR) | sed -e s/lib/share/)/share/config/$$z \
+ $(PKGDIR)-style-$$p/$(OODIR)/share/config/$$z; \
+ done
+ mkdir -p $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/share/config; \
+ mv $(PKGDIR)-common/$(OODIR)/share/config/images_helpimg.zip \
+ $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/share/config/; \
+ mkdir -p $(PKGDIR)-common/$(OODIR)/share/config; \
+ ln -s /$(shell echo $(OODIR) | sed -e s/lib/share/)/share/config/images_helpimg.zip \
+ $(PKGDIR)-common/$(OODIR)/share/config/images_helpimg.zip; \
+
+ifeq "$(DEB_VENDOR)" "Debian"
+ # install Debian presentation template
+ mkdir -p $(PKGDIR)-common/$(OODIR)/share/template/en-US/presnt
+ install -m644 debian/templates/*.otp $(PKGDIR)-common/$(OODIR)/share/template/en-US/presnt/
+endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ # add symlinks for docs and examples
+ cd $(PKGDIR)-dev-doc/$(OOSDKDIR) && \
+ rm -rf docs && \
+ ln -sf /usr/share/doc/libreoffice/sdk/docs docs
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ ifeq "$(ENABLE_SCRIPT_PROVIDER_BSH)" "y"
+ mkdir -p $(PKGDIR)-script-provider-bsh/$(OODIR)/share/Scripts
+ mv $(PKGDIR)-common/$(OODIR)/share/Scripts/beanshell \
+ $(PKGDIR)-script-provider-bsh/$(OODIR)/share/Scripts
+ endif
+
+ ifeq "$(ENABLE_SCRIPT_PROVIDER_JS)" "y"
+ mkdir -p $(PKGDIR)-script-provider-js/$(OODIR)/share/Scripts
+ mv $(PKGDIR)-common/$(OODIR)/share/Scripts/javascript \
+ $(PKGDIR)-script-provider-js/$(OODIR)/share/Scripts
+ endif
+
+ ifeq "$(ENABLE_MEDIAWIKI)" "y"
+ rm -f $(PKGDIR)-wiki-publisher/$(OODIR)/share/extensions/wiki-publisher/registration/LICENSE
+ rm -f $(PKGDIR)-wiki-publisher/$(OODIR)/share/extensions/wiki-publisher/license/THIRDPARTYLICENSEREADME.html
+ endif
+
+ ifeq "$(ENABLE_NLPSOLVER)" "y"
+ rm -f $(PKGDIR)-nlpsolver/$(OODIR)/share/extensions/nlpsolver/registration/LICENSE
+ endif
+endif
+
+ # unopkg creates stuff in there.
+ mkdir -p $(PKGDIR)-common/$(OODIR)/share/prereg
+ mkdir -p $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/usr/var/)/share/prereg/bundled
+ ln -s /$(shell echo $(OODIR) | sed -e s/usr/var/)/share/prereg/bundled \
+ $(PKGDIR)-common/$(OODIR)/share/prereg/bundled
+
+ # dedup
+ cd $(PKGDIR)-common/usr/share/icons && \
+ rdfind -outputname /dev/null -makesymlinks true hicolor gnome
+ # should happen on dh_link, apparently didn't fix the /home/... symlinks
+ # so do this...
+ symlinks -r -s -c $(PKGDIR)-common
+
+ # looks like it's pretty nonstandard to have symlinks; this breaks
+ # e.g. thegeneration from the appdata files. So get rid of those
+ # and move them to the libreoffice-* names after all.
+ mkdir -p $(PKGDIR)-common/usr/share/applications
+ for i in startcenter xsltfilter; do \
+ rm -f $(PKGDIR)-common/usr/share/applications/libreoffice-$$i.desktop; \
+ mv $(PKGDIR)-common/$(OODIR)/share/xdg/$$i.desktop \
+ $(PKGDIR)-common/usr/share/applications/libreoffice-$$i.desktop; \
+ done
+
+ # fix the shebangs to make lintian happy
+ sed -i "s,/usr/bin/env perl,/usr/bin/perl,g" \
+ $(PKGDIR)-common/usr/share/$(OODIRNAME)/bin/lo-xlate-lang
+ for i in $(PKGDIR)-common/$(OODIR)/share/config/webcast/*.pl; do \
+ sed -i "s,/usr/bin/env perl,/usr/bin/perl,g" $$i; \
+ done
+
+ for i in $(ARCH_INDEP_PACKAGES); do \
+ if [ -e debian/$$i.bug-script.in ]; then \
+ cat debian/$$i.bug-script.in \
+ | sed -e "s/@PLATFORMID@/$(PLATFORMID)/" \
+ > debian/$$i.bug-script; \
+ fi ;\
+ if [ -e debian/$$i.ucf ]; then \
+ if [ ! -e debian/$$i.bug-script.in ]; then \
+ printf "#!/bin/sh\n\n" > debian/$$i.bug-script; \
+ fi ;\
+ echo "ucfq $$i >&3" >> debian/$$i.bug-script; \
+ fi ;\
+ done
+ for i in $(ARCH_INDEP_PACKAGES); do \
+ if [ -e debian/$$i.bug-control ]; then \
+ if grep -q "^report-with:" debian/$$i.bug-control; then \
+ extra_packages=`grep "^report-with:" debian/$$i.bug-control | sed -e "s/^report-with: //"`; \
+ for p in $$extra_packages; do \
+ if [ $$i != $$p ] && [ -f debian/$$p.bug-script ] && ! echo $$added_packages | grep -q $$p && \
+ ! grep -q bug\/$$p\/script debian/$$i.bug-script; then \
+ printf "#!/bin/sh\n" >> debian/$$i.bug-script; \
+ printf "if [ -x /usr/share/bug/$$p/script ]; then /usr/share/bug/$$p/script; fi\n" >> debian/$$i.bug-script; \
+ added_packages="$$added_packages $$p"; \
+ fi; \
+ done; \
+ added_packages=; \
+ fi; \
+ fi; \
+ done
+ # generate .links files from *.in
+ for PKG in $(ARCH_INDEP_PACKAGES); do \
+ LINKS=debian/$$PKG.links ; \
+ if [ -e $$LINKS.in ]; then \
+ sed -e "s#\@OODIR\@#$(OODIR)#g" \
+ < $$LINKS.in > $$LINKS ; \
+ fi; \
+ done
+
+ # install extension shell lib for use by extensions not from here
+ install -D -m644 debian/shell-lib-extensions.sh \
+ $(PKGDIR)-common/usr/share/$(OODIRNAME)/shell-lib-extensions.sh
+
+ifneq "$(ENABLE_HELP)" "n"
+ ifneq "$(ENABLE_HTML_HELP)" "y"
+ # those are needed in /usr/share, too
+ mkdir -p $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)
+ mv $(PKGDIR)-common/$(OODIR)/help \
+ $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)
+ endif
+endif
+ # help is in /usr/share
+ sed -i 's,$$(instpath)/help,/$(shell echo $(OODIR) | sed -e s/lib/share/)/help,' \
+ $(PKGDIR)-common/$(OODIR)/share/registry/main.xcd
+
+ # compat dirs, the split icons thing need it
+ mkdir -p $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/program
+ mkdir -p $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/program
+
+ # enable session handling and recovery
+ perl -pi -e 's,<prop oor:name="DocumentStoreUIEnabled" oor:type="xs:boolean"><value>false</value></prop>,<prop oor:name="DocumentStoreUIEnabled" oor:type="xs:boolean"><value>true</value></prop>,' $(PKGDIR)-common/$(OODIR)/share/registry/main.xcd
+
+ # examples. move where they belong
+ mkdir -p $(PKGDIR)-common/usr/share/doc/libreoffice-common/examples
+ for i in oo-ldap.xcd.sample oo-ad-ldap.xcd.sample; do \
+ mv $(PKGDIR)-common/$(OODIR)/share/registry/$$i \
+ $(PKGDIR)-common/usr/share/doc/libreoffice-common/examples; \
+ ln -s /usr/share/doc/libreoffice-common/examples/$$i $(PKGDIR)-common/etc/libreoffice/registry/$$i; \
+ done
+
+ # register technical.dic
+ perl -pi -e 's/standard.dic;/standard.dic;technical.dic;/' $(PKGDIR)-common/$(OODIR)/share/registry/main.xcd
+
+#ifeq "$(PACKAGE_SDK)" "y"
+# # install gengal stuff into -dev-gui
+# mkdir -p $(PKGDIR)-dev-gui/$(OODIR)/program
+# install -m644 $(SOURCE_TREE)/svx/$(shell . $(SOURCE_TREE)/bin/get_config_variables OUTPATH PROEXT; echo $$OUTPATH$$PROEXT)/bin/gengalrc \
+# $(PKGDIR)-dev-gui/$(OODIR)/program/gengalrc
+#endif
+
+ # package the Java public libraries...
+ifeq "$(ENABLE_JAVA)" "y"
+ # somehow --has-package-version doesn't overwrite version and without <version>...</version>
+ # we get a NullPointerException when calling mh_installjar
+ for i in ridl unoloader libreoffice; do \
+ sed -e s/@version@/$(shell echo $(DEB_VERSION_UPSTREAM) | cut -d~ -f1)/ \
+ < $(SOURCE_TREE)/ridljar/pom.$$i.xml > debian/pom.$$i.xml; \
+ done
+ sed -e s/@version@/$(shell echo $(DEB_VERSION_UPSTREAM) | cut -d~ -f1)/ \
+ < $(SOURCE_TREE)/jurt/pom.jurt.xml > debian/pom.jurt.xml
+ sed -e s/@version@/$(shell echo $(DEB_VERSION_UPSTREAM) | cut -d~ -f1)/ \
+ < $(SOURCE_TREE)/javaunohelper/pom.juh.xml > debian/pom.juh.xml
+ sed -e s/@version@/$(shell echo $(DEB_VERSION_UPSTREAM) | cut -d~ -f1)/ \
+ < $(SOURCE_TREE)/unoil/pom.unoil.xml > debian/pom.unoil.xml
+ for i in juh jurt unoil ridl libreoffice; do \
+ mh_installpoms -pliblibreoffice-java; \
+ mh_installjar -pliblibreoffice-java -l debian/pom.$$i.xml instdir/program/classes/$$i.jar; \
+ done
+ mh_installpoms -plibunoloader-java
+ mh_installjar -plibunoloader-java -l debian/pom.unoloader.xml instdir/program/classes/unoloader.jar
+
+ # create symlinks where LO expects them
+ for i in juh jurt unoil ridl libreoffice; do \
+ mkdir -p $(CURDIR)/debian/liblibreoffice-java/$(OODIR)/program/classes; \
+ cd $(CURDIR)/debian/liblibreoffice-java/$(OODIR)/program/classes; \
+ ln -s /usr/share/java/$$i.jar $$i.jar; \
+ done
+ mkdir -p $(CURDIR)/debian/libunoloader-java/$(OODIR)/program/classes; \
+ cd $(CURDIR)/debian/libunoloader-java/$(OODIR)/program/classes; \
+ ln -s /usr/share/java/unoloader.jar unoloader.jar
+
+ # fix up Class-Path
+ # make libreoffice.jar to be able to find libjpipe.so.
+ # See http://markmail.org/message/yacqa7oowugxwmn2 (for juh.jar back then...)
+ # also: javaunohelper/com/sun/star/comp/helper/Bootstrap.java: NativeLibraryLoader.loadLibrary( Bootstrap.class.getClassLoader(), "juh" );
+ # seems to work nevertheless (if called from program/classes?) but fix it
+ # nevertheless
+ jh_classpath --classpath="unoloader.jar ../ /$(OODIR)/program" \
+ $(CURDIR)/debian/liblibreoffice-java/usr/share/java/libreoffice.jar
+endif
+
+ifeq "$(INSTALL_APPARMOR_PROFILES)" "y"
+ mkdir -p $(PKGDIR)-common/etc/apparmor.d
+ ./sysui/desktop/share/apparmor.sh /$(OODIR)/ sysui/desktop/apparmor/ \
+ $(PKGDIR)-common/etc/apparmor.d/ false $(CHECK_APPARMOR_PROFILES)
+ ifneq "$(ENABLE_APPARMOR_PROFILES)" "y"
+ # disable the apparmor files per default
+ mkdir -p $(PKGDIR)-common/etc/apparmor.d/disable
+ cd $(PKGDIR)-common/etc/apparmor.d/disable && \
+ for i in oosplash senddoc soffice.bin xpdfimport; do \
+ ln -sf /etc/apparmor.d/usr.lib.libreoffice.program.$$i \
+ usr.lib.libreoffice.program.$$i; \
+ done
+ endif
+endif
+
+ # fix fundamentalrc to not cause
+ # /usr/lib/libreoffice/program/../program/xpdfimport calls
+ # we know the path and the apparmor profiles disallow this...
+ sed -i "s,^BRAND_BASE_DIR=.*,BRAND_BASE_DIR=file:///$(OODIR)," \
+ $(PKGDIR)-common/$(OODIR)/program/fundamentalrc
+
+ # make LO look for its "registry" in /etc (ucf-managed)
+ sed -i "s,^CONFIGURATION_LAYERS=.*\(dconf.*\)$$,CONFIGURATION_LAYERS=xcsxcu:file:///etc/libreoffice/registry res:file:///etc/libreoffice/registry \1," \
+ $(PKGDIR)-common/$(OODIR)/program/fundamentalrc
+
+ # make config xml "pretty" to make ucf --three-way work
+ for p in $(ARCH_INDEP_PACKAGES); do \
+ for i in `find debian/$$p/$(OODIR)/share/registry -name "*.xcd"`; do \
+ t=`mktemp -q`; \
+ xmllint --pretty 1 $$i > $$t; \
+ mv $$t $$i; \
+ done; \
+ done
+ # and "hide" the ucf source registry; makes it less confusing for
+ # people who do know /usr/lib/libreoffice/share/registry. Said path
+ # is a symlink set by libreoffice-common.links
+ for p in $(ARCH_INDEP_PACKAGES); do \
+ for i in `find debian/$$p -type d -wholename "*$(OODIR)/share/registry"`; do \
+ mv $$i `echo $$i | sed -e s/registry/.registry/`; \
+ done; \
+ done
+
+ # make sure we have a share/extensions dir owned by -common
+ mkdir -p $(PKGDIR)-common/$(OODIR)/share/extensions
+
+ touch $@
+
+binary-arch: $(STAMP_DIR)/binary-arch
+$(STAMP_DIR)/binary-arch: $(STAMP_DIR)/install-arch debian/control $(STAMP_DIR)/maintscripts
+ dh_testdir
+ dh_testroot
+
+ for pkg in $(ARCH_DEP_PACKAGES) ; do \
+ rm -f debian/$$pkg.*.debhelper;\
+ rm -rf debian/$$pkg/DEBIAN;\
+ done
+
+ dh_installdocs -a -A
+ cp workdir/CustomTarget/readlicense_oo/readme/README_en-US \
+ $(PKGDIR)-core/usr/share/doc/libreoffice-core/README
+ifeq "$(BUILD_NOGUI_PACKAGES)" "y"
+ cp workdir/CustomTarget/readlicense_oo/readme/README_en-US \
+ $(PKGDIR)-core-nogui/usr/share/doc/libreoffice-core-nogui/README
+endif
+ dh_ucf -a
+ for i in $(ARCH_DEP_PACKAGES); do \
+ if [ -e debian/$$i.postinst.debhelper ] && grep -q ucf debian/$$i.postinst.debhelper; then \
+ sed -i "s/ucf\ /ucf --three-way /" debian/$$i.postinst.debhelper; \
+ sed -i "s/ucfr\ /ucfr --force /" debian/$$i.postinst.debhelper; \
+ sed -i "s/ucf/ucf (>= 0.8)/" debian/$$i.substvars; \
+ fi ; \
+ if [ -e debian/$$i.postrm.debhelper ] && grep -q ucf debian/$$i.postrm.debhelper; then \
+ sed -i "s/ucfr\ /ucfr --force /" debian/$$i.postrm.debhelper; \
+ fi ; \
+ done
+ dh_installdebconf -a
+ dh_installman -a
+ for i in writer calc draw base math impress; do \
+ for i in `find $(PKGDIR)-$$i -type l -name "lo*.1"`; do \
+ mv $$i $$i.gz; \
+ if [ "`readlink $$i`" != "libreoffice.1.gz" ]; then \
+ ln -sf libreoffice.1.gz $$i.gz; \
+ fi; \
+ done; \
+ done
+ dh_installchangelogs -a -XChangeLog -k
+ dh_installmime -a
+ifeq "$(ENABLE_PYTHON)" "y"
+ dh_python3 -ppython3-uno --no-ext-rename --no-guessing-deps
+ dh_python3 -ppython3-uno --no-ext-rename --no-guessing-deps $(OODIR)/program
+endif
+ dh_lintian -a
+ dh_bugfiles -a -A
+ dh_link -a
+ifeq "$(BUILD_DBGSYM_PACKAGES)" "y"
+ for i in libuno-cppu3 libuno-sal3 libreoffice-core libreoffice-writer; do \
+ rm -rf debian/.debhelper/$$i/dbgsym-root; \
+ done
+ ifeq "$(BUILD_NOGUI_PACKAGES)" "y"
+ for i in libreoffice-core-nogui libreoffice-writer-nogui; do \
+ rm -rf debian/.debhelper/$$i/dbgsym-root; \
+ done
+ endif
+ ifeq "$(USE_DWZ)" "y"
+ dh_dwz -a $(DH_DWZ_ARGS) -- $(DWZ_ARGS)
+ endif
+ dh_strip -a
+ # dh_strip --dbg-package= is not idempotent, force copying of the binaries
+ # again...
+ rm -f $(STAMP_DIR)/install-common
+
+ # install gdb helpers
+ mkdir -p debian/.debhelper/libreoffice-core/dbgsym-root/usr/share/gdb/auto-load/$(OODIR)
+ mv $(CURDIR)/debian/tmp/usr/share/gdb/auto-load/$(OODIR)/program \
+ debian/.debhelper/libreoffice-core/dbgsym-root/usr/share/gdb/auto-load/$(OODIR)
+ mkdir -p debian/.debhelper/libreoffice-core/dbgsym-root/usr/share/libreoffice/gdb
+ mv $(CURDIR)/debian/tmp/usr/share/libreoffice/gdb/libreoffice \
+ debian/.debhelper/libreoffice-core/dbgsym-root/usr/share/libreoffice/gdb
+
+ # move sal and cppu gdb helpers into their respective packages
+ for i in sal cppu; do \
+ mkdir -p debian/.debhelper/libuno-$${i}3/dbgsym-root/usr/share/gdb/auto-load/$(OODIR)/program; \
+ mkdir -p debian/.debhelper/libuno-$${i}3/dbgsym-root/usr/share/libreoffice/gdb/libreoffice; \
+ mv debian/.debhelper/libreoffice-core/dbgsym-root/usr/share/gdb/auto-load/$(OODIR)/program/libuno_$$i.so.3-gdb.py \
+ debian/.debhelper/libuno-$${i}3/dbgsym-root/usr/share/gdb/auto-load/$(OODIR)/program; \
+ mv debian/.debhelper/libreoffice-core/dbgsym-root/usr/share/libreoffice/gdb/libreoffice/$$i.py \
+ debian/.debhelper/libuno-$${i}3/dbgsym-root/usr/share/libreoffice/gdb/libreoffice; \
+ done
+
+ # move sw and writerfilter gdb helpers to writer-dbgsym
+ mkdir -p debian/.debhelper/libreoffice-writer/dbgsym-root/usr/share/gdb/auto-load/$(OODIR)/program
+ mkdir -p debian/.debhelper/libreoffice-writer/dbgsym-root/usr/share/libreoffice/gdb/libreoffice/
+ for i in sw writerfilter; do \
+ if [ -f debian/.debhelper/libreoffice-core/dbgsym-root/usr/share/gdb/auto-load/$(OODIR)/program/lib$${i}lo.so-gdb.py ]; then \
+ mv debian/.debhelper/libreoffice-core/dbgsym-root/usr/share/gdb/auto-load/$(OODIR)/program/lib$${i}lo.so-gdb.py \
+ debian/.debhelper/libreoffice-writer/dbgsym-root/usr/share/gdb/auto-load/$(OODIR)/program/; \
+ fi; \
+ mv debian/.debhelper/libreoffice-core/dbgsym-root/usr/share/libreoffice/gdb/libreoffice/$$i.py \
+ debian/.debhelper/libreoffice-writer/dbgsym-root/usr/share/libreoffice/gdb/libreoffice; \
+ done
+
+ # populate -nogui-dbgsym from the gui counterparts
+ifeq "$(BUILD_NOGUI_PACKAGES)" "y"
+ mkdir -p debian/.debhelper/libreoffice-core-nogui/dbgsym-root/usr/share/gdb/auto-load/
+ mkdir -p debian/.debhelper/libreoffice-core-nogui/dbgsym-root/usr/share/libreoffice/
+ cp -ra debian/.debhelper/libreoffice-core/dbgsym-root/usr/share/gdb/auto-load/$(OODIR) \
+ debian/.debhelper/libreoffice-core-nogui/dbgsym-root/usr/share/gdb/auto-load/
+ cp -ra debian/.debhelper/libreoffice-core/dbgsym-root/usr/share/libreoffice/gdb \
+ debian/.debhelper/libreoffice-core-nogui/dbgsym-root/usr/share/libreoffice
+ mkdir -p debian/.debhelper/libreoffice-writer-nogui/dbgsym-root/usr/share/gdb
+ mkdir -p debian/.debhelper/libreoffice-writer-nogui/dbgsym-root/usr/share/libreoffice/
+ cp -ra debian/.debhelper/libreoffice-writer/dbgsym-root/usr/share/gdb/auto-load/ \
+ debian/.debhelper/libreoffice-writer-nogui/dbgsym-root/usr/share/gdb
+ cp -ra debian/.debhelper/libreoffice-writer/dbgsym-root/usr/share/libreoffice/gdb \
+ debian/.debhelper/libreoffice-writer-nogui/dbgsym-root/usr/share/libreoffice
+endif
+else
+ dh_strip -a --no-automatic-dbgsym
+endif
+ dh_fixperms -a
+ifeq "$(BUILD_DBGSYM_PACKAGES)" "y"
+ # dh_fixperms is not run on -dbgsym. And we get 0775 directories. Fix it
+ # manually
+ #16:29 < nthykier> _rene_: I would recommend a "find debian/.debhelper/libreoffice-core/dbgsym-root
+ # debian/$(UNO_LIBS_DBG_ROOT) debian/.debhelper/libreoffice-writer/dbgsym-root -exec
+ # chmod go=rX,u+rw,a-s {} +"
+ #16:29 < nthykier> Should be faster and is the same expression as used by
+ # dh_fixperms
+ find debian/.debhelper/libreoffice-core/dbgsym-root debian/.debhelper/libuno*/dbgsym-root debian/.debhelper/libreoffice-writer/dbgsym-root ! -type l -exec chmod go=rX,u+rw,a-s {} +
+endif
+ dh_icons -a
+ dh_compress -a -X.py -X.mk -X.sxd
+ifeq "$(ENABLE_INTROSPECTION)" "y"
+ dh_girepository -a debian/liblibreofficekitgtk/$(OODIR)/program
+endif
+ dh_strip_nondeterminism -a
+ for i in sal3 cppu3 salhelpergcc3-3 cppuhelpergcc3-3 purpenvhelpergcc3-3; do \
+ dh_makeshlibs -plibuno-$$i -V"libuno-$$i (>= 1:$(shell grep UREPACKAGEVERSION $(SOURCE_TREE)/instsetoo_native/util/openoffice.lst | awk '{ print $$2 }' | cut -d. -f1-3)~)" -- -c2 -V -v$(BINARY_VERSION); \
+ done
+ dh_makeshlibs -n -pure -V"ure (>= 1:$(shell grep UREPACKAGEVERSION $(SOURCE_TREE)/instsetoo_native/util/openoffice.lst | awk '{ print $$2 }' | cut -d. -f1-3)~)" -- -d -V -v$(BINARY_VERSION)
+ dh_installdeb -a
+ rm -f debian/shlibs.local
+ifeq "$(BUILD_KFREEBSD)" "y"
+ cat debian/shlibs.override.libc >> debian/shlibs.local
+endif
+ # no shlibs dependencies on internal libs (which are dynamic)
+ifeq (,$(filter icu, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.icu >> debian/shlibs.local
+endif
+ifeq (,$(filter libvisio, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libvisio >> debian/shlibs.local
+endif
+ifeq (,$(filter libwpd, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libwpd >> debian/shlibs.local
+endif
+ifeq (,$(filter libwpg, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libwpg >> debian/shlibs.local
+endif
+ifeq (,$(filter libwps, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libwps >> debian/shlibs.local
+endif
+ifeq (,$(filter libodfgen, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libodfgen >> debian/shlibs.local
+endif
+ifeq (,$(filter libmwaw, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libmwaw >> debian/shlibs.local
+endif
+ifeq (,$(filter librevenge, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.librevenge >> debian/shlibs.local
+endif
+ifeq (,$(filter libetonyek, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libetonyek >> debian/shlibs.local
+endif
+ifeq (,$(filter libstaroffice, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libstaroffice >> debian/shlibs.local
+endif
+ifeq (,$(filter orcus, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.orcus >> debian/shlibs.local
+endif
+ifeq (,$(filter liblangtag, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.liblangtag >> debian/shlibs.local
+endif
+ # the other way as the above, depend on a newer libcmis to that the
+ # advertised google 2-factor-auth fixes are present
+ifneq (,$(filter libcmis, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libcmis >> debian/shlibs.local
+endif
+ifeq "$(ENABLE_FIREBIRD)" "y"
+ifneq (,$(filter firebird, $(SYSTEM_STUFF)))
+ # force the values of .shlibs which gives us a (wanted) (>= 3.0.0~)
+ # instead of .symbols which gives os only a (>= 2.5.0.25784~ReleaseCandidate1.ds2)...
+ cat /var/lib/dpkg/info/libfbclient2*.shlibs >> debian/shlibs.local
+
+endif
+endif
+
+ dh_shlibdeps -a -Nlibreoffice-core-nogui -Nure \
+ -Lure -Llibuno-sal3 -Llibpuno-cppu3 -Llibuno-salhelpergcc3-3 -Llibcppuhelpergcc3-3 -Llibuno-purpenvhelpergcc3-3 \
+ -l$(CURDIR)/debian/libuno-sal3/$(OODIR)/program:$(CURDIR)/debian/libuno-cppu3/$(OODIR)/program:$(CURDIR)/debian/libuno-salhelpergcc3-3/$(OODIR)/program:$(CURDIR)/debian/libuno-cppuhelpergcc3-3/$(OODIR)/program:$(CURDIR)/debian/libuno-purpenvhelpergcc3-3/$(OODIR)/program:$(CURDIR)/debian/ure/$(OODIR)/program:$(CURDIR)/$(PKGDIR)-core/$(OODIR)/program:$(CURDIR)/$(PKGDIR)-base-core/$(OODIR)/program:$(CURDIR)/$(PKGDIR)-base/$(OODIR)/program:$(CURDIR)/$(PKGDIR)-writer/$(OODIR)/program \
+ $(SHLIBS_OVERRIDE)
+ dh_shlibdeps -pure \
+ -Llibuno-sal3 -Llibpuno-cppu3 -Llibuno-salhelpergcc3-3 -Llibcppuhelpergcc3-3 -Llibuno-purpenvhelpergcc3-3 \
+ -l$(CURDIR)/debian/libuno-sal3/$(OODIR)/program:$(CURDIR)/debian/libuno-cppu3/$(OODIR)/program:$(CURDIR)/debian/libuno-salhelpergcc3-3/$(OODIR)/program:$(CURDIR)/debian/libuno-cppuhelpergcc3-3/$(OODIR)/program:$(CURDIR)/debian/libuno-purpenvhelpergcc3-3/$(OODIR)/program:$(CURDIR)/debian/ure/$(OODIR)/program \
+ -- -xure
+ifeq "$(BUILD_NOGUI_PACKAGES)" "y"
+ dh_shlibdeps -plibreoffice-core-nogui \
+ -Lure -Llibuno-sal3 -Llibpuno-cppu3 -Llibuno-salhelpergcc3-3 -Llibcppuhelpergcc3-3 -Llibuno-purpenvhelpergcc3-3 \
+ -l$(CURDIR)/debian/libuno-sal3/$(OODIR)/program:$(CURDIR)/debian/libuno-cppu3/$(OODIR)/program:$(CURDIR)/debian/libuno-salhelpergcc3-3/$(OODIR)/program:$(CURDIR)/debian/libuno-cppuhelpergcc3-3/$(OODIR)/program:$(CURDIR)/debian/libuno-purpenvhelpergcc3-3/$(OODIR)/program:$(CURDIR)/debian/ure/$(OODIR)/program:$(CURDIR)/$(PKGDIR)-core-nogui/$(OODIR)/program:$(CURDIR)/$(PKGDIR)-base-core/$(OODIR)/program:$(CURDIR)/$(PKGDIR)-base/$(OODIR)/program:$(CURDIR)/$(PKGDIR)-writer/$(OODIR)/program \
+ $(SHLIBS_OVERRIDE)
+endif
+ ifneq (,$(filter coinmp, $(SYSTEM_STUFF)))
+ perl -pi -e "s/coinor-libcoinutils3v5/coinor-libcoinutils3v5 $(COINUTILS_MINVER)/" \
+ debian/libreoffice-calc.substvars
+ perl -pi -e "s/coinor-libcoinmp1v5/coinor-libcoinmp1v5 $(COINMP_MINVER)/" \
+ debian/libreoffice-calc.substvars
+ endif
+ # FIXME. Otherwise the unoEditGlossary openDialog test crashes and hangs. go sure to make sure it doesn't
+ # happen on runtime. No idea whether alpha1 would suffice but it doesn't really matter in practice anyway :)
+ perl -pi -e "s/, libuno-sal3 \(>= 1:7.3.0~beta1\),/, libuno-sal3 \(>= 1:7.4.0~beta1\),/" \
+ debian/libreoffice-core.substvars
+ifeq "$(ENABLE_JAVA)" "y"
+ for p in $(ARCH_DEP_PACKAGES); do \
+ jh_depends -p$$p -Xure -Xbase-files; \
+ done
+ # jh_depends adds ure (${source:Version}) entries. They are overly strict
+ # and do not fit anyway given ure has a different versioning scheme. Excluded
+ # above, readd here unversioned
+ perl -pi -e 's/^(java:Depends.*$$)/\1, ure/' \
+ debian/libofficebean-java.substvars
+endif
+# This switch to dh_shlibdeps reduces the 'libXXX not found' warnings but
+# causes ldd crashes sometimes when used with fakeroot:
+# -l $(PKGDIR)-core/$(OPENOFFICEDIR)/program
+ dh_gencontrol -a $(DEBHELPER_OPTIONS) \
+ -- \
+ -V'base-version=$(BASE_VERSION)' \
+ -V'oover=$(OOVER)' \
+ -V'next-oover=$(NEXT_OOVER)' \
+ -V'help-l10n-virtual-version=$(HELP_L10N_VIRTUAL_VERSION)' \
+ -V'base-hsqldb-depends=$(BASE_HSQLDB_DEPENDS)' \
+ -V'base-firebird-recommends=$(BASE_FIREBIRD_RECOMMENDS)' \
+ -V'java-common-depends=$(JAVA_COMMON_DEPENDS) $(JAVA_COMMON_DEPENDS_VERSION)' \
+ -V'java-runtime-depends=$(JAVA_RUNTIME_DEPENDS)' \
+ -V'Binary-Version=$(BINARY_VERSION)' \
+ -V'ooo-officebean-dep=$(OOO_OFFICEBEAN_DEP)' \
+ -V'plasma-iconset-dep=$(PLASMA_ICONSET_DEP)' \
+ -V'kf5-qt5-depends=$(KF5_QT5_DEPENDS)' \
+ -V'lpsolve-dep=$(LPSOLVE_DEP)' \
+ -V'gstreamer-plugins-suggests=$(GSTREAMER_PLUGINS_SUGGESTS)' \
+ -V'libebook-dep=$(LIBEBOOK_DEP)' \
+ -V'idlc-cpp-depends=$(IDLC_CPP_DEPENDS)' \
+ -V'pyuno-depends=$(PYUNO_DEPENDS)' \
+ -V'gnome-gtk-recommends=$(GNOME_GTK_RECOMMENDS)' \
+ -V'firebird-engine-depends=$(FIREBIRD_ENGINE_DEPENDS)' \
+ -V'libsane-suggests=$(shell dpkg -S /usr/lib/$(DEB_HOST_MULTIARCH)/libsane.so.1 | cut -d: -f1)' \
+ -v$(BINARY_VERSION)
+ifeq "$(BUILD_DBGSYM_PACKAGES)" "y"
+ for i in libuno-sal3 libuno-cppu3 libuno-salhelpergcc3-3 libuno-cppuhelpergcc3-3 libuno-purpenvhelpergcc3-3 \
+ libreoffice-core libreoffice-writer; do \
+ perl -pi -e 's/^(Depends:.*)/\1\nRecommends: gdb, python3-six/' \
+ debian/.debhelper/$$i/dbgsym-root/DEBIAN/control; \
+ done
+ perl -pi -e 's/Recommends: /Recommends: libreoffice-core-dbgsym, /' \
+ debian/.debhelper/libreoffice-writer/dbgsym-root/DEBIAN/control
+ ifeq "$(BUILD_NOGUI_PACKAGES)" "y"
+ for i in libreoffice-core libreoffice-writer; do \
+ perl -pi -e 's/^(Depends:.*)/\1\nRecommends: gdb, python3-six/' \
+ debian/.debhelper/$$i-nogui/dbgsym-root/DEBIAN/control; \
+ done
+ perl -pi -e 's/Recommends: /Recommends: libreoffice-core-nogui-dbgsym, /' \
+ debian/.debhelper/libreoffice-writer-nogui/dbgsym-root/DEBIAN/control
+ perl -pi -e 's/^(Recommends:.*)/Replaces: libreoffice-core-nogui-dbgsym (<< 1:6.4.3~rc1-3)\n\1/' \
+ debian/.debhelper/libreoffice-writer-nogui/dbgsym-root/DEBIAN/control
+ perl -pi -e 's/^(Replaces:.*)/Breaks: libreoffice-core-nogui-dbgsym (<< 1:6.4.3~rc1-3)\n\1/' \
+ debian/.debhelper/libreoffice-writer-nogui/dbgsym-root/DEBIAN/control
+ endif
+endif
+
+ dh_md5sums -a
+ dh_builddeb -a $(DEBHELPER_OPTIONS)
+
+ touch $@
+
+binary-indep: $(GSI_EXPORT_STAMP) $(STAMP_DIR)/binary-indep
+$(STAMP_DIR)/binary-indep: $(STAMP_DIR)/install-indep debian/control $(STAMP_DIR)/maintscripts $(STAMP_DIR)/langpacks
+ifneq ($(DEB_HOST_ARCH),$(filter $(DEB_HOST_ARCH),$(OOO_JAVA_ARCHS)))
+ echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+ echo "For uploads with binary-all packages, please use arches where Java is enabled"
+ echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+endif
+ dh_testdir
+ifneq ($(PACKAGE_SDK_DOCS),y)
+ echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+ echo "For uploads with binary-all packages, please use arches where the SDK docs are enabled!!!!"
+ echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+endif
+ dh_testdir
+ dh_testroot
+
+ for pkg in $(ARCH_INDEP_PACKAGES) ; do \
+ rm -f debian/$$pkg.*.debhelper;\
+ rm -rf debian/$$pkg/DEBIAN;\
+ done
+
+ dh_installdocs -i -A
+ cp workdir/CustomTarget/readlicense_oo/readme/README_en-US \
+ $(PKGDIR)-common/usr/share/doc/libreoffice-common/README
+ dh_ucf -i
+ for i in $(ARCH_INDEP_PACKAGES); do \
+ if [ -e debian/$$i.postinst.debhelper ] && grep -q ucf debian/$$i.postinst.debhelper; then \
+ sed -i "s/ucf\ /ucf --three-way /" debian/$$i.postinst.debhelper; \
+ sed -i "s/ucfr\ /ucfr --force /" debian/$$i.postinst.debhelper; \
+ sed -i "s/ucf/ucf (>= 0.8)/" debian/$$i.substvars; \
+ fi ; \
+ if [ -e debian/$$i.postrm.debhelper ] && grep -q ucf debian/$$i.postrm.debhelper; then \
+ sed -i "s/ucfr\ /ucfr --force /" debian/$$i.postrm.debhelper; \
+ fi ; \
+ done
+ dh_installman -i
+ for i in `find $(PKGDIR)-common -type l -name "lo*.1"`; do \
+ mv $$i $$i.gz; \
+ if [ "`readlink $$i`" != "libreoffice.1.gz" ]; then \
+ ln -sf libreoffice.1.gz $$i.gz; \
+ fi; \
+ done
+ dh_installchangelogs -i -XChangeLog -Nlibreoffice-librelogo -k
+ifeq "$(PACKAGE_LIBRELOGO)" "y"
+ dh_installchangelogs -plibreoffice-librelogo -k librelogo/source/ChangeLog
+endif
+ifeq "$(PACKAGE_SDK_DOCS)" "y"
+ dh_doxygen -plibreoffice-dev-doc
+endif
+ dh_installmime -i
+ dh_python3 -ppython3-access2base
+ dh_python3 -plibreoffice-script-provider-python
+ifeq "$(ENABLE_HELP)" "y"
+ ifeq "$(ENABLE_HTML_HELP)" "y"
+ for iso in $(shell echo $(HELPISOS) | tr A-Z a-z); do \
+ sed -e s/@LCODE@/$$iso/ < debian/libreoffice-help.lintian-overrides.in \
+ > debian/libreoffice-help-$$iso.lintian-overrides; \
+ done
+ endif
+endif
+ dh_lintian -i
+ dh_bugfiles -i -A
+ifeq "$(BULLSEYE_BACKPORT)" "y"
+ dh_link -i -Xprism
+else
+ dh_link -i
+endif
+ dh_fixperms -i
+ dh_icons -i
+ifeq "$(INSTALL_APPARMOR_PROFILES)" "y"
+ for i in oosplash senddoc soffice.bin xpdfimport; do \
+ dh_apparmor -plibreoffice-common --profile-name=usr.lib.libreoffice.program.$$i; \
+ done
+endif
+ dh_compress -i -X.py -X.mk -X.sxd -X.xcd.sample
+ dh_strip_nondeterminism -i
+ dh_installdeb -i
+ifeq "$(ENABLE_JAVA)" "y"
+ for p in $(ARCH_INDEP_PACKAGES); do \
+ if echo "$$p" | grep -q help; then continue; fi; \
+ jh_depends -p$$p \
+ -Xlibreoffice-report-builder -Xbase-files; \
+ done
+endif
+ # jh_depends adds a librhino-java Depends where we still use internal rhino
+ perl -pi -e "s/librhino-java//" \
+ debian/libreoffice-script-provider-js.substvars
+ifeq "$(BUILD_TEST_PACKAGES)" "y"
+ perl -pi -e 's/junit4/junit4 $(JUNIT_MIN_VER)/' \
+ debian/libreoffice-subsequentcheckbase.substvars
+endif
+ dh_gencontrol -i $(DEBHELPER_OPTIONS) \
+ -Nfonts-opensymbol -- \
+ -V'base-version=$(BASE_VERSION)' \
+ -V'oover=$(OOVER)' \
+ -V'next-oover=$(NEXT_OOVER)' \
+ -V'help-l10n-virtual-version=$(HELP_L10N_VIRTUAL_VERSION)' \
+ -V'java-common-depends=$(JAVA_COMMON_DEPENDS)' \
+ -V'java-runtime-depends=$(JAVA_RUNTIME_DEPENDS)' \
+ -V'textcat-data-recommends=$(TEXTCAT_DATA_RECOMMENDS)' \
+ -V'numbertext-data-recommends=$(NUMBERTEXT_DATA_RECOMMENDS)' \
+ -V'pyuno-depends=$(PYUNO_DEPENDS)' \
+ -V'help-depends=$(HELP_DEPENDS)' \
+ -V'help-recommends=$(HELP_RECOMMENDS)' \
+ -V'help-common-depends=$(HELP_COMMON_DEPENDS)' \
+ -V'report-builder-jar-depends=$(REPORT_BUILDER_JAR_DEPENDS)' \
+ -V'Binary-Version=$(BINARY_VERSION)' \
+ -v$(BINARY_VERSION)
+ dh_gencontrol -pfonts-opensymbol -- \
+ -v`echo $(BINARY_VERSION) | cut -d: -f1`:$(shell fontforge -lang=ff -c 'Open($$1); Print ($$fontversion); Quit(0);' debian/fonts-opensymbol/usr/share/fonts/truetype/libreoffice/opens___.ttf)+LibO`echo $(BINARY_VERSION) | cut -d: -f2`
+ifeq "$(ENABLE_MEDIAWIKI)" "y"
+ dh_gencontrol -plibreoffice-wiki-publisher -- \
+ -V'java-common-depends=$(JAVA_COMMON_DEPENDS)' \
+ -V'java-runtime-depends=$(JAVA_RUNTIME_DEPENDS)' \
+ -v`echo $(BINARY_VERSION) | cut -d: -f1`:$(shell grep "<version" $(SOURCE_TREE)/swext/mediawiki/src/description.xml | perl -pi -e 's,<version value=\"(.*)\"/>,\1,; s/^\s+//')+LibO`echo $(BINARY_VERSION) | cut -d: -f2`
+endif
+ifeq "$(ENABLE_NLPSOLVER)" "y"
+ dh_gencontrol -plibreoffice-nlpsolver -- \
+ -V'java-common-depends=$(JAVA_COMMON_DEPENDS)' \
+ -V'java-runtime-depends=$(JAVA_RUNTIME_DEPENDS)' \
+ -v`echo $(BINARY_VERSION) | cut -d: -f1`:$(shell grep "<version" $(SOURCE_TREE)/nlpsolver/src/com/sun/star/comp/Calc/NLPSolver/description.xml | perl -pi -e 's,<version value=\"(.*)\"/>,\1,; s/^\s+//')+LibO`echo $(BINARY_VERSION) | cut -d: -f2`
+endif
+ dh_md5sums -i
+ dh_builddeb -i $(DEBHELPER_OPTIONS)
+
+ touch $@
+
+binary: binary-arch binary-indep
+
+ifeq "$(USE_GIT_TARBALLS)" "y"
+# $(1) is the upstream name of the repo
+# $(2) is the name of the tarball
+# $(3) is the path to archive (empty for everything)
+#
+# according to policy get-orig-source has to download to the current dir, thus
+# should not require a dh_testdir. However, like this we can have clean deps
+# from build and download the source, configure, build, pack in on piece. As
+# get-orig-source is an optional target anyway, we stick to support only this
+# case and not random dirs. see also: debian bug 494141
+# also, we need to run configure to create the external tarball anyway
+
+GIT_INSTALLED:=$(shell which git >/dev/null 2>/dev/null && echo "y")
+
+get_orig_tarball=$(CURDIR)/../libreoffice_$(DEB_VERSION_UPSTREAM).orig$(1).tar.xz
+
+define pack_gittarball
+$(if $(GIT_INSTALLED),,$(error You need git.))
+dh_testdir
+TMPD=`mktemp -d $(if $(TMP),-p $(TMP))` && \
+mkdir $${TMPD}/archive && \
+git clone --bare $(GIT_BASEURL)/$(1) $${TMPD}/repo -b $(GIT_BRANCH) && \
+git archive --remote $${TMPD}/repo --format=tar --prefix libreoffice-$(DEB_VERSION_UPSTREAM)/ $(GIT_TAG) |tar x -C $${TMPD}/archive && \
+tar cvJf $(2) -C $${TMPD}/archive/$(3) --transform 's,./,,' . && \
+rm -rf $${TMPD}
+endef
+
+define unpack_gittarball
+dh_testdir
+mkdir -p $(CURDIR)/$(1)
+test -f $(CURDIR)/$(1)/.gitignore || tar xvJf $(2) -C $(CURDIR)/$(1) $(3)
+endef
+
+ifneq ($(filter get-orig-source unpack,$(MAKECMDGOALS)),)
+$(call get_orig_tarball):
+ $(call pack_gittarball,core,$@,)
+
+$(call get_orig_tarball,-helpcontent2):
+ $(call pack_gittarball,help,$@,libreoffice-$(DEB_VERSION_UPSTREAM)/)
+
+$(call get_orig_tarball,-%):
+ $(call pack_gittarball,$*,$@,libreoffice-$(DEB_VERSION_UPSTREAM)/)
+
+# Get upstream external sources
+$(call get_orig_tarball,-tarballs): helpcontent2/makefile.pmk translations/makefile.mk .gitignore
+ dh_testdir
+ rm -rf tarballs
+ mkdir -p tarballs
+ quilt push -a
+ ./autogen.sh $(filter-out --disable-fetch-external,$(CONFIGURE_FLAGS)) --with-all-tarballs
+ $(MAKE) download gb_LO_VER=$(DEB_VERSION_UPSTREAM)
+ tar cvJf $@ -C tarballs --transform 's,./,,' .
+
+# using flag files for unpacking
+.gitignore: $(call get_orig_tarball)
+ $(call unpack_gittarball,,$<,--strip-components=1)
+
+translations/makefile.mk: $(call get_orig_tarball,-translations)
+ $(call unpack_gittarball,translations,$<,)
+
+helpcontent2/makefile.pmk: $(call get_orig_tarball,-helpcontent2)
+ $(call unpack_gittarball,helpcontent2,$<,)
+
+tarballs/fetch.log: $(call get_orig_tarball,-tarballs) patched
+ $(call unpack_gittarball,tarballs,$<,)
+
+get-orig-source: $(call get_orig_tarball,-tarballs) tarballs/fetch.log
+ dh_testdir
+
+unpack: tarballs/fetch.log
+ dh_testdir
+endif
+endif
+
+ifeq "$(USE_SOURCE_TARBALLS)" "y"
+get-orig-source:
+ PATH=$(CURDIR)/debian/scripts:$$PATH uscan --watchfile=$(CURDIR)/debian/watch --verbose --force
+ debian/scripts/fix_component_tarballs.sh
+endif
+
+.PHONY: control
+.PHONY: clean-debdir clean-instsetoo clean-objectdirs clean default
+.PHONY: prepare build build-indep build-arch install-arch install-indep
+.PHONY: get-orig-source unpack patched
+.PHONY: $(stampdir_targets)
+
+# vim:set noet ai sts=8 sw=8 tw=0:
--- /dev/null
+#!/bin/sh
+
+set -x
+set -e
+
+pwd=`pwd`
+tmp=`mktemp -q -d`
+
+debianver=`uscan --report --verbose | grep newversion | cut -d= -f2 | awk '{ print $1 }' | head -n 1`
+
+# the main tarball
+t=`uscan --report --verbose | grep newfile | cut -d= -f2 | head -n 1`
+sourcever=`echo $t | cut -d- -f2 | sed -e "s/\.tar\.xz$//"`
+
+files=`uscan --report --verbose | grep newfile | cut -d= -f2 | tail -n +2`
+
+for f in $files; do
+ if echo $f | grep -q help; then
+ c=helpcontent2;
+ else
+ c=`echo $f | cut -d- -f2`;
+ fi
+
+ cd ${tmp}
+ echo "Extracting original $f..."
+ tar --strip-components 1 --extract --verbose --xz --file ${pwd}/../$f
+ echo "Deleting obsolete libreoffice_${debianver}.orig-${c}.tar.xz and it's signatiure...."
+ rm -f ${pwd}/../libreoffice_${debianver}.orig-${c}.tar.xz
+ rm -f ${pwd}/../libreoffice_${debianver}.orig-${c}.tar.xz.asc
+ echo "Creating new libreoffice_${debianver}.orig-${c}.tar.xz..."
+ tar --create --verbose --xz --file ${pwd}/../libreoffice_${debianver}.orig-${c}.tar.xz ${c}
+ rm -rf ${c}
+ cd ${pwd}
+done
+
+rm -rf ${tmp}
--- /dev/null
+#!/bin/sh
+
+libs=`grep libebook.*\.so connectivity/source/drivers/evoab2/EApi.cxx | perl -pe 's/\s+\"(.*)\".*/$1/'`
+
+for l in $libs; do
+ if [ -e "/usr/lib/`dpkg-architecture -qDEB_HOST_MULTIARCH`/$l" ]; then
+ p=/usr/lib/`dpkg-architecture -qDEB_HOST_MULTIARCH`
+ else
+ if [ -e /usr/lib/$l ]; then
+ p=/usr/lib
+ else
+ continue
+ fi
+ fi
+ # sanity check: do the libs match with what we would get
+ # for our libebook version if we followed the .so symlink?
+ l1=`readlink $p/$l`
+ l2_tmp=`echo $l | perl -pe 's/(.*)\.\d+$/$1/'`
+ l2=`readlink $p/$l2_tmp`
+ l3=`readlink $p/$l2`
+ if [ "$l1" = "$l2" -o "$l1" = "$l3" ]; then
+ dep=`dpkg -S $p/$l | cut -d: -f1`
+ fi
+done
+
+if [ -n "$dep" ]; then
+ echo $dep
+else
+ echo "Cannot find libebook dependency. None of the following libs found:"
+ echo $libs
+ exit 1
+fi
+
--- /dev/null
+#!/bin/sh
+
+## create split package dirs out of LibreOffices gid_* files
+## copied from former ooo-build/libreoffice-build package-ooo
+## (c) 2005 Chris Halls <halls@debian.org>
+## (c) 2005-2011 Rene Engelhard <rene@debian.org>
+
+export OODESTDIR=$DESTDIR
+
+cd $DESTDIR
+
+echo "Copying gid files...."
+rm gid_*
+cp $DESTDIR/../../file-lists/orig/gid_* .
+
+echo "Creating package directories..."
+
+test -d pkg && rm -r pkg || :
+
+# Create package tree (needed by Debian's dpkg)
+# create_package_directory <list_file> <directory_name>
+create_package_directory()
+{
+listfile=$1
+directory="$2"
+perl -nl \
+ -e " if(/^%dir (.*)/)
+ {system('mkdir', '-p', '-m', '755', \"$directory\".\$1);}
+ else
+ {rename('./'.\$_, \"$directory\".\$_);}
+ " \
+ $listfile
+}
+
+# move_wrappers <directory_name> <name> [...]
+move_wrappers()
+{
+directory=$1
+shift
+mkdir -m755 -p "$directory"/usr/bin
+while test -n "$1"; do
+ mv usr/*bin/"$1$BINSUFFIX" "$directory"/usr/bin
+ shift
+done
+}
+
+create_package_directory gid_Module_Root_Ure_Hidden pkg/ure
+create_package_directory gid_Module_Root pkg/libreoffice-common
+create_package_directory gid_Module_Root_Brand pkg/libreoffice-common
+# done by dh_installman
+#mkdir -p pkg/libreoffice-common/usr/share/man/man1
+#mv usr/share/man/man1/libreoffice$BINSUFFIX.1.gz \
+# pkg/libreoffice-common/usr/share/man/man1
+#for i in ./usr/share/man/man1/*; do \
+# if [ "$i" = "unopkg.1.gz" -o "$i" = "lofromtemplate.1.gz" \
+# -o "$i" = "loffice.1.gz" ]; then p=common; \
+# else p=`basename $i .1.gz | sed -e s/^lo//`; \
+# fi
+# mkdir -p pkg/libreoffice-$p/usr/share/man/man1
+# mv $i \
+# pkg/libreoffice-$p/usr/share/man/man1
+#done
+for i in ./usr/share/applications/*.desktop; do \
+ if [ "`basename $i`" = "libreoffice-startcenter.desktop" ]; then p=libreoffice-common; \
+ elif [ "`basename $i`" = "libreoffice-xsltfilter.desktop" ]; then p=libreoffice-common; \
+ else p=`basename $i .desktop`; fi
+ mkdir -p pkg/$p/usr/share/applications
+ mv $i \
+ pkg/$p/usr/share/applications
+done
+mkdir -p pkg/libreoffice-common/usr/share
+mv ./usr/share/icons \
+ pkg/libreoffice-common/usr/share
+mv ./usr/share/application-registry \
+ pkg/libreoffice-common/usr/share
+mv ./usr/share/mime* \
+ pkg/libreoffice-common/usr/share
+
+create_package_directory gid_Module_Root_Files_Images pkg/libreoffice-common
+create_package_directory gid_Module_Oo_Linguistic pkg/libreoffice-common
+create_package_directory gid_Module_Optional_Xsltfiltersamples pkg/libreoffice-common
+create_package_directory gid_Module_Filter pkg/libreoffice-common
+create_package_directory gid_Module_Optional_Grfflt pkg/libreoffice-draw
+create_package_directory gid_Module_Prg_Calc_Bin pkg/libreoffice-calc
+create_package_directory gid_Module_Prg_Math_Bin pkg/libreoffice-math
+create_package_directory gid_Module_Prg_Draw_Bin pkg/libreoffice-draw
+create_package_directory gid_Module_Prg_Wrt_Bin pkg/libreoffice-writer
+create_package_directory gid_Module_Prg_Impress_Bin pkg/libreoffice-impress
+create_package_directory gid_Module_Prg_Base_Bin pkg/libreoffice-base
+create_package_directory gid_Module_Brand_Prg_Calc pkg/libreoffice-calc
+create_package_directory gid_Module_Brand_Prg_Math pkg/libreoffice-math
+create_package_directory gid_Module_Brand_Prg_Draw pkg/libreoffice-draw
+create_package_directory gid_Module_Brand_Prg_Wrt pkg/libreoffice-writer
+create_package_directory gid_Module_Brand_Prg_Impress pkg/libreoffice-impress
+create_package_directory gid_Module_Brand_Prg_Base pkg/libreoffice-base
+create_package_directory gid_Module_Pyuno pkg/python3-uno
+create_package_directory gid_Module_Optional_Pyuno_LibreLogo pkg/libreoffice-librelogo
+create_package_directory gid_Module_Script_Provider_For_Python pkg/libreoffice-script-provider-python
+create_package_directory gid_Module_Optional_Gnome pkg/libreoffice-gnome
+create_package_directory gid_Module_Optional_Kde pkg/libreoffice-kde
+create_package_directory gid_Module_Optional_OGLTrans pkg/libreoffice-impress
+create_package_directory gid_Module_Root_SDK pkg/libreoffice-dev
+# WTF? Why is this suddently not installed itself?
+mv usr/lib/libreoffice/sdk/lib \
+ pkg/libreoffice-dev/usr/lib/libreoffice/sdk
+create_package_directory gid_Module_Optional_Extensions_Script_Provider_For_BS pkg/libreoffice-script-provider-bsh
+create_package_directory gid_Module_Optional_Extensions_Script_Provider_For_JS pkg/libreoffice-script-provider-js
+create_package_directory gid_Module_Optional_Extensions_MEDIAWIKI pkg/libreoffice-wiki-publisher
+create_package_directory gid_Module_Optional_Extensions_NLPSolver pkg/libreoffice-nlpsolver
+create_package_directory gid_Module_Pdfimport pkg/libreoffice-common
+create_package_directory gid_Module_Reportbuilder pkg/libreoffice-report-builder
+create_package_directory gid_Module_Optional_PostgresqlSdbc pkg/libreoffice-sdbc-postgresql
+create_package_directory gid_Module_Libreofficekit pkg/libreofficekit-data
+move_wrappers pkg/libreoffice-common soffice unopkg
+move_wrappers pkg/libreoffice-common libreoffice loffice lofromtemplate
+move_wrappers pkg/libreoffice-base lobase
+move_wrappers pkg/libreoffice-writer lowriter loweb
+move_wrappers pkg/libreoffice-calc localc
+move_wrappers pkg/libreoffice-impress loimpress
+move_wrappers pkg/libreoffice-math lomath
+move_wrappers pkg/libreoffice-draw lodraw
+
+for l in `echo $OOO_LANGS_LIST`; do
+ for p in Impress Draw Math Calc Base Writer; do
+ create_package_directory gid_Module_Langpack_${p}_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+ done
+ create_package_directory gid_Module_Langpack_Basis_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+ create_package_directory gid_Module_Langpack_Brand_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+ create_package_directory gid_Module_Langpack_Resource_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+ if [ -f gid_Module_Helppack_Help_`echo $l | sed -e s/-/_/g` ]; then
+ create_package_directory gid_Module_Helppack_Help_`echo $l | sed -e s/-/_/g` pkg/libreoffice-help-$l
+ fi
+ # some help files are in _Langpack_{Writer,Impress,...}_<lang>
+ # move them from -l10n to -help
+ if [ "$l" = "en-US" ]; then d=en; else d=$l; fi
+ mv pkg/libreoffice-l10n-$l/$OOINSTBASE/help/$d/* \
+ pkg/libreoffice-help-$l/$OOINSTBASE/help/$d && \
+ rmdir pkg/libreoffice-l10n-$l/$OOINSTBASE/help/$d
+done
+
+# Move all libraries and binaries from -common to -core
+if [ ! -d $OODESTDIR/pkg/libreoffice-core/$OOINSTBASE/program ]; then \
+mkdir -p $OODESTDIR/pkg/libreoffice-core/$OOINSTBASE/program; \
+fi &&
+( cd pkg/libreoffice-common/$OOINSTBASE/program
+ find -maxdepth 1 \
+ -regex '\./\(.*\.so.*\|.*\.bin\|pagein.*\|kdefilepicker\|msfontextract\|.*\.rdb\|javaldx\|oosplash\|uri-encode\|xpdfimport\|ui-previewer\|opencltest\)' \
+ -exec mv {} $OODESTDIR/pkg/libreoffice-core/$OOINSTBASE/program \;
+);
+for i in types services; do \
+ if [ ! -d $OODESTDIR/pkg/libreoffice-core/$OOINSTBASE/program/$i ]; then \
+ mkdir -p $OODESTDIR/pkg/libreoffice-core/$OOINSTBASE/program/$i; \
+ fi &&
+ ( cd pkg/libreoffice-common/$OOINSTBASE/program/$i
+ find -maxdepth 1 \
+ -regex '\./\(.*\.rdb\)' \
+ -exec mv {} $OODESTDIR/pkg/libreoffice-core/$OOINSTBASE/program/$i \;
+ ); \
+done
+
+mkdir -p pkg/libreoffice-common/usr/share/bash-completion/completions
+mv usr/share/bash-completion/completions/libreoffice$BINSUFFIX.sh \
+ pkg/libreoffice-common/usr/share/bash-completion/completions/libreoffice$BINSUFFIX
+
+mv .$OOINSTBASE/program/java-set-classpath \
+ pkg/libreoffice-common/$OOINSTBASE/program
+if echo $OOO_LANGS_LIST | grep -q en-US; then
+ for i in forms/resume.ott officorr/project-proposal.ott; do \
+ mkdir -p pkg/libreoffice-common/$OOINSTBASE/share/template/en-US/`dirname $i`; \
+ mv .$OOINSTBASE/share/template/en-US/$i \
+ pkg/libreoffice-common/$OOINSTBASE/share/template/en-US/$i; \
+ done; \
+fi
+
+# Warn for any remaining files
+find . -path './pkg' -prune -o -not -name 'gid_Module_*' -not -type d -exec echo "File not packaged: {}" \;
+
--- /dev/null
+#! /usr/bin/python3
+
+import re, sys, fileinput
+
+def splitlines():
+ fields = ('Build-Depends', 'Build-Conflicts', 'Build-Depends-Indep', 'Build-Depends-Arch',
+ 'Depends', 'Replaces', 'Provides', 'Conflicts', 'Recommends', 'Suggests', 'Breaks')
+ for line in fileinput.input():
+ line = line[:-1]
+ field = None
+ for f in fields:
+ if line.startswith(f+':'):
+ field = f
+ break
+ if not field:
+ print(line)
+ continue
+ values = [f.strip() for f in line.split(':',1)[1].strip().split(',')]
+ if len(values) > 2:
+ print('%s: %s' % (field, ',\n '.join(values)))
+ else:
+ print('%s: %s' % (field, ', '.join(values)))
+
+def sort_list(unsorted_list):
+ packages = [x for x in unsorted_list if re.match("[a-z0-9]", x)]
+ special = [x for x in unsorted_list if not re.match("[a-z0-9]", x)]
+ return sorted(packages) + sorted(special)
+
+def joinlines():
+ fields = ('Build-Depends', 'Build-Conflicts', 'Build-Depends-Indep', 'Build-Depends-Arch',
+ 'Depends', 'Replaces', 'Provides', 'Conflicts', 'Recommends', 'Suggests', 'Breaks')
+ buffer = None
+ for line in fileinput.input():
+ line = line[:-1]
+ if buffer:
+ if line.startswith(' '):
+ buffer = buffer + ' ' + line.strip()
+ continue
+ else:
+ packages = sort_list(set([x.strip() for x in buffer[len(field)+1:].split(",")]))
+ if "" in packages:
+ packages.remove("")
+ length = len(field) + sum([2 + len(package) for package in packages])
+ if length > 80:
+ indentation = " " * (len(field) + 2)
+ packages_with_indention = [indentation + x for x in packages]
+ packages_with_indention = ",\n".join(packages_with_indention)
+ print(field + ": " + packages_with_indention.strip())
+ else:
+ print(field + ": " + ", ".join(packages).strip())
+ buffer = None
+ field = None
+ for f in fields:
+ if line.startswith(f+':'):
+ field = f
+ break
+ if field:
+ buffer = line.strip()
+ continue
+ print(line)
+
+def main():
+ #splitlines()
+ joinlines()
+
+main()
--- /dev/null
+#!/bin/sh
+
+# generate locales that uicheck depend on
+# "stolen" from gcc
+
+LOCPATH=`pwd`/debian/locales
+export LOCPATH
+
+[ -d $LOCPATH ] || mkdir -p $LOCPATH
+
+[ -n "$USE_CPUS" ] || USE_CPUS=1
+
+umask 022
+
+echo "Generating locales..."
+xargs -L 1 -P $USE_CPUS -I{} \
+ sh -c '
+ set {}; locale=$1; charset=$2
+ case $locale in \#*) exit;; esac
+ [ -n "$locale" -a -n "$charset" ] || exit
+ echo " `echo $locale | sed \"s/\([^.\@]*\).*/\1/\"`.$charset`echo $locale | sed \"s/\([^\@]*\)\(\@.*\)*/\2/\"`..."
+ if [ -f $LOCPATH/$locale ]; then
+ input=$locale
+ else
+ input=`echo $locale | sed "s/\([^.]*\)[^@]*\(.*\)/\1\2/"`
+ fi
+ localedef -i $input -c -f $charset $LOCPATH/$locale #-A /etc/locale.alias
+ ' <<EOF
+en_US.UTF-8 UTF-8
+EOF
+
+echo "Generation complete."
--- /dev/null
+#!/bin/sh
+
+# Copyright (C) 1996 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+if
+test -r $2
+then
+if
+cmp $1 $2 > /dev/null
+then
+echo $2 is unchanged
+rm -f $1
+else
+mv -f $1 $2
+fi
+else
+mv -f $1 $2
+fi
--- /dev/null
+#!/bin/sh
+
+set -e
+
+# Quick and dirty script to stat the LO translations/ pos wrt % translated
+# FIXME: maybe use pocount from translate-toolkit
+
+# Author: Rene Engelhard <rene@debian.org>
+# (C) 2017 Software in the Public Interest, Inc.
+
+cd translations/source
+
+for l in `ls -1`; do
+ # 23:36 <@cloph> no - but you can do a brute-force method of just counting msgid and comparing that with »msgstr ""« matches.
+ # 23:37 <@cloph> While that ignores multiline strings, there aren't too many and should work as a rough estimate
+ msgid_count=$(grep msgid `find $l -name "*.po"` | wc -l)
+ msgstr_count=$(grep msgstr `find $l -name "*.po"` | wc -l)
+ empty_msgstr_count=$(grep msgstr\ \"\" `find $l -name "*.po"` | wc -l)
+ p=$((100*$empty_msgstr_count/$msgid_count))
+ echo "$l: $msgid_count strings, $(($msgid_count-$empty_msgstr_count))/$msgid_count translated; $empty_msgstr_count/$msgid_count untranslated"
+ if test $msgid_count -lt 50000; then
+ echo "$l: no help translations"
+ fi
+ echo "$l: $((100-$p))% translated, $p% untranslated"
+
+ if test $p -lt 20; then
+ langs="$langs $l"
+ fi
+done
+
+echo "languages over 80% translated:"
+echo $langs
--- /dev/null
+validate_extensions() {
+ INSTDIR=`mktemp -d`
+ if HOME=$INSTDIR /usr/lib/libreoffice/program/unopkg list --bundled >/dev/null 2>/dev/null; then
+ HOME=$INSTDIR /usr/lib/libreoffice/program/unopkg validate -v --bundled
+ fi
+}
+
+make_lo_sync_extensions() {
+ if [ -d /usr/lib/libreoffice/share/extensions ]; then
+ touch /usr/lib/libreoffice/share/extensions
+ fi
+}
--- /dev/null
+update_lool_systemplate() {
+ echo -n "Updating LibreOffice Online systemplate... "
+ su lool --shell=/bin/sh -c 'loolwsd-systemplate-setup /var/lib/lool/systemplate /usr/lib/libreoffice >/dev/null 2>&1'
+ echo "done."
+}
--- /dev/null
+libicudata 67
+libicui18n 67
+libicule 67
+libicuuc 67
+libicutu 67
--- /dev/null
+libc 0.1 libc0.1 (>= 2.10.2-7)
--- /dev/null
+libcmis-0.5 5 libcmis-0.5-5v5 (>= 0.5.1+git20160603)
+libcmis-c-0.5 5 libcmis-0.5-5v5 (>= 0.5.1+git20160603)
--- /dev/null
+libetonyek-0.1-lo 1
--- /dev/null
+liblangtag-lo 1
--- /dev/null
+libmwaw-0.3-lo 3
--- /dev/null
+libodfgen-0.1-lo 1
--- /dev/null
+librevenge-0.0-lo 0
--- /dev/null
+libstaroffice-0.0-lo 0
--- /dev/null
+libvisio-0.1 1
--- /dev/null
+libwpd-0.10-lo 10
--- /dev/null
+libwpg-0.3-lo 3
--- /dev/null
+libwps-0.4-lo 4
--- /dev/null
+liborcus-0.17 0
+liborcus-parser-0.17 0
--- /dev/null
+# configuration file to set up some environment variables for LibreOffice
+
+# File locking; possible values are:
+# - yes: enable file locking unconditionally
+# - no: disable file locking
+# - auto: enable file locking, when the document is found on a nfs share
+# If the environment variable SAL_ENABLE_FILE_LOCKING is set,
+# the setting if ENABLE_FILE_LOCKING has no effect.
+
+FILE_LOCKING=auto
+
+# OpenGL support; may cause trouble with the restricted nvidia and fglrx
+# drivers; possible values are:
+# - yes: enable OpenGL support unconditionally
+# - no: disable OpenGL support.
+# - auto: only enable OpenGL support, if not running with the restricted
+# nvidia and fglrx drivers.
+# If the environment variable SAL_NOOPENGL is set,
+# the setting if OPENGL_SUPPORT has no effect.
+
+OPENGL_SUPPORT=no
--- /dev/null
+3.0 (quilt)
--- /dev/null
+debian/templates/debian-presentation.otp
+debian/templates/debian-presentation-background.xcf
+desktop/test/deployment/update/platform/linux_sparc64.oxt
+helpcontent2/source/media/screenshots/modules/simpress/ui/prntopts/pt/prntopts.png
+tarballs/798b2ffdc8bcfe7bca2cf92b62caf685-rhino1_5R5.zip
+tarballs/35c94d2df8893241173de1d16b6034c0-swingExSrc.zip
+tarballs/a7983f859eafb2677d7ff386a023bc40-xsltml_2.1.2.zip
+tarballs/pdfium-5058.tar.bz2
+tarballs/skia-m103-b301ff025004c9cd82816c86c547588e6c24b466.tar.xz
+tarballs/dtoa-20180411.tgz
--- /dev/null
+# This *is* the code. lintian, don't assume every HTML file with long lines is generated, thanks, bye!
+libreoffice source: source-is-missing [odk/index.html]
+libreoffice source: source-is-missing [odk/docs/tools.html]
+libreoffice source: source-is-missing [odk/examples/DevelopersGuide/examples.html]
+libreoffice source: source-is-missing [odk/examples/examples.html]
+libreoffice source: source-is-missing [odk/index_online.html]
+# sw/qa/extras/htmlimport/data/PageAndParagraphFilled.html: <meta name="generator" content="LibreOfficeDev 5.1.0.0.alpha1 (Windows)"/>
+# sw/qa/extras/htmlimport/data/inlined_image.html: <meta name="generator" content="LibreOfficeDev 4.4.0.0.alpha0 (Linux)"/>
+# long lines due to inline base64 image
+libreoffice source: source-is-missing [sw/qa/extras/htmlimport/data/PageAndParagraphFilled.html]
+libreoffice source: source-is-missing [sw/qa/extras/htmlimport/data/inlined_image.html]
+# as above, but without generator meta tag
+libreoffice source: source-is-missing [sw/qa/extras/htmlexport/data/clearing-break.html]
+libreoffice source: source-is-missing [sw/qa/extras/htmlimport/data/image-lazy-read.html]
+libreoffice source: source-is-missing [sw/qa/extras/htmlimport/data/tdf142781.html]
+# <META NAME="GENERATOR" CONTENT="OpenOffice.org 2.3 (Linux)">
+libreoffice source: source-is-missing [sw/qa/extras/layout/data/forcepoint94.html]
+# similar, this is NOT minified.
+libreoffice source: source-is-missing [helpcontent2/help3xsl/prism.js]
+# no, it isn't. the one is always, the other is for tests (<!nocheck>)!
+libreoffice source: redundant-build-prerequisites libmwaw-dev (>= 0.3.1), libmwaw-dev (>= 0.3.21)
+# hrmpf. of course they are there
+# $ ls tarballs/*
+# tarballs/35c94d2df8893241173de1d16b6034c0-swingExSrc.zip tarballs/dtoa-20180411.tgz
+# tarballs/798b2ffdc8bcfe7bca2cf92b62caf685-rhino1_5R5.zip tarballs/pdfium-5058.tar.bz2
+# tarballs/a7983f859eafb2677d7ff386a023bc40-xsltml_2.1.2.zip tarballs/skia-m103-b301ff025004c9cd82816c86c547588e6c24b466.tar.xz
+libreoffice source: superfluous-file-pattern tarballs/*rhino* [debian/copyright:135]
+libreoffice source: superfluous-file-pattern tarballs/*swingEx* [debian/copyright:167]
+libreoffice source: superfluous-file-pattern tarballs/*xsltml* [debian/copyright:140]
+libreoffice source: superfluous-file-pattern tarballs/dtoa* [debian/copyright:126]
+libreoffice source: superfluous-file-pattern tarballs/pdfium* [debian/copyright:173]
+libreoffice source: superfluous-file-pattern tarballs/skia* [debian/copyright:131]
+# patched in by us
+libreoffice source: superfluous-file-pattern wizards/source/access2base/access2base.html [debian/copyright:203]
+libreoffice source: source-is-missing [wizards/source/access2base/access2base.html]
+# this is 盖闻天地之数，有十二万九千六百岁为一元。(UTF-8) in GB18030 as verifiable by
+# recode GB18030..UTF-8 sw/qa/extras/txtimport/data/GB18030.txt. Thus this *is* the source
+# and not a windows binary at all.
+# Needs to be GB18030 for sw/qa/extras/txtimport/txtimport.cxx - testTdf92161_gb18030
+libreoffice source: source-contains-prebuilt-windows-binary [sw/qa/extras/txtimport/data/GB18030.txt]
+# two licenses..
+libreoffice source: duplicate-globbing-patterns helpcontent2/help3xsl/polyfills.js (lines 232 236) [debian/copyright]
+
--- /dev/null
+[Desktop Entry]
+Name=LibreOffice @APP@ ...
+Comment=Enter LibreOffice @APP@ filename:
+Comment[de]=Name der LibreOffice @APP@-Datei eingeben:
+Type=Link
+URL=.source/soffice.@EXT@
+Icon=libreoffice-oasis-@TYPE@
+
--- /dev/null
+#!/usr/bin/python3
+
+import access2base
+print(access2base)
--- /dev/null
+Tests: testtools-bridgetest
+Depends: @builddeps@, ure
+Restrictions: allow-stderr, rw-build-tree, superficial
+
+Tests: pyuno-import, uno-import
+Depends: python3, python3-uno
+Restrictions: superficial
+
+Tests: access2base-import
+Depends: python3, python3-access2base
+Restrictions: superficial
+
+## Is there a need for this small test given we run the UI tests etc.?
+#Tests: smoketest
+#Architecture: amd64 arm64
+#Depends: @builddeps@, libreoffice-smoketest-data, libreoffice-dev, libreoffice-core, libreoffice-writer, libreoffice-calc, libreoffice-impress, libreoffice-math, libreoffice-base, libreoffice-sdbc-hsqldb, libreoffice-sdbc-firebird
+#Restrictions: allow-stderr, build-needed, rw-build-tree, superficial
+
+# this is already done by smoketest upstream, but fails when doing it against
+# the installed LO. works standalone, though, so it's patched out of the
+# smoketest. Do it here separately.
+Tests: test-extension
+Architecture: amd64 arm64 armhf i386 ppc64 ppc64el s390x
+Depends: libreoffice-core-nogui, libreoffice-common, libreoffice-java-common, libreoffice-smoketest-data, default-jdk
+Restrictions: allow-stderr, superficial, skippable
+
+Tests: test-extension-shared
+Architecture: amd64 arm64 armhf i386 ppc64 ppc64el s390x
+Depends: libreoffice-core-nogui, libreoffice-common, libreoffice-java-common, libreoffice-smoketest-data, default-jdk
+Restrictions: allow-stderr, needs-root, superficial
+
+# in the following some tests need RTL and CJK language packs installed to pass.
+# he is the example for RTL, zh-tw for CJK (and zh-tw was choosen to also test xx-YY locales)
+
+# Maybe all those tests should be merged into one (especially for the "small" ones like writerperfect or
+# "tiny" ones like sfx2,svx,cui.
+# But it already takes ~1.5 h (though including copy..) for all them to run on amd64 and the overall autopkgtest
+# test timeout is 166 min (a bit over 2.5 hrs.). What are we doing on slow archs?
+# And secondly. one might miss breakage if Java or another package is not installed but is
+# required because everything needed would be in Depends: then for one test...
+# Try to optimize a bit though by not sorting alphabetically but where the new packages are a superset so
+# we can reuse the testbed
+
+Tests: uicheck-sfx2
+Depends: @builddeps@, libreoffice-core, libreoffice-impress, python3-uno
+Restrictions: allow-stderr
+
+Tests: uicheck-svx
+Depends: @builddeps@, libreoffice-core, libreoffice-impress, python3-uno
+Restrictions: allow-stderr
+
+Tests: uicheck-cui
+Depends: @builddeps@, libreoffice-core, libreoffice-impress, libreoffice-writer, python3-uno
+Restrictions: allow-stderr
+
+Tests: uicheck-sd
+Depends: @builddeps@, libreoffice-core, libreoffice-draw, libreoffice-impress, libreoffice-calc, python3-uno
+Restrictions: allow-stderr
+
+Tests: uicheck-writerperfect
+Depends: @builddeps@, libreoffice-core, libreoffice-writer, python3-uno
+Restrictions: allow-stderr
+
+Tests: uicheck-sc
+Architecture: alpha amd64 arm64 armel armhf i386 ia64 m68k mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 mips
+Depends: @builddeps@, libreoffice-core, libreoffice-calc, libreoffice-draw, python3-uno, libreoffice-l10n-he, libreoffice-l10n-zh-tw, libreoffice-java-common, libreoffice-writer
+Restrictions: allow-stderr
+
+Tests: uicheck-sw
+Architecture: alpha amd64 arm64 armel armhf i386 ia64 m68k mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 mips
+Depends: @builddeps@, libreoffice-core, libreoffice-writer, libreoffice-draw, libreoffice-calc, libreoffice-base, python3-uno, libreoffice-l10n-he, libreoffice-l10n-zh-tw, libreoffice-librelogo, libreoffice-java-common
+Restrictions: allow-stderr, needs-internet
+
+Tests: uicheck-uitest
+Depends: @builddeps@, libreoffice-core, libreoffice-writer, libreoffice-calc, libreoffice-impress, libreoffice-math, libreoffice-base, python3-uno, libreoffice-l10n-he, libreoffice-l10n-zh-tw
+Restrictions: allow-stderr
+
+Tests: junit-subsequentcheck
+Architecture: amd64 arm64
+Depends: @builddeps@, libreoffice-core, libreoffice-writer, libreoffice-calc, libreoffice-impress, libreoffice-math, libreoffice-base, libreoffice-subsequentcheckbase, libreoffice-sdbc-hsqldb, libreoffice-sdbc-firebird
+Restrictions: allow-stderr, skippable
+
+Test-Command: export SYSTEM_UCPP=TRUE; export DOXYGEN=`command -v doxygen`; export ENABLE_JAVA=TRUE; export JDK=sun; export JAVADOC=/usr/lib/jvm/default-java/bin/javadoc; perl odk/util/check.pl /usr/lib/libreoffice/sdk
+Features: test-name=sdk-complete
+Depends: libreoffice-dev, libreoffice-dev-doc
+Restrictions: superficial
+
+Tests: odk-build-examples
+Architecture: amd64 arm64 armhf i386 ppc64 ppc64el s390x
+Depends: @builddeps@, libreoffice-core-nogui, libreoffice-dev, libreoffice-dev-doc, python3-uno
+Restrictions: allow-stderr, skippable
+
+Tests: odk-build-examples-java
+Architecture: amd64 arm64 armhf i386 ppc64 ppc64el s390x
+Depends: @builddeps@, libreoffice-core-nogui, libreoffice-dev, libreoffice-dev-doc, libreoffice-java-common, libofficebean-java
+Restrictions: allow-stderr, skippable
+
+#Tests: cppunit-subsequentcheck
+#Architecture: amd64 arm64
+#Depends: @builddeps@, libreoffice,libreoffice-core,libreoffice-common,libreoffice-java-common,libreoffice-writer,libreoffice-calc,libreoffice-impress,libreoffice-draw,libreoffice-math,libreoffice-base-core,libreoffice-base,libreoffice-style-breeze,libreoffice-style-colibre,libreoffice-style-sifr,libreoffice-style-elementary,libreoffice-style-karasa-jaga,libreoffice-style-sukapura,libreoffice-gnome,python3-uno,libreoffice-script-provider-python,libreoffice-script-provider-bsh,libreoffice-script-provider-js,libreoffice-sdbc-hsqldb,libreoffice-sdbc-mysql,libreoffice-base-drivers,python3-access2base,libofficebean-java,uno-libs-private,libuno-sal3,libuno-cppu3,ure,ure-java,libunoloader-java,liblibreoffice-java,libreoffice-wiki-publisher,libreoffice-report-builder,libreoffice-report-builder-bin,libreoffice-nlpsolver,fonts-opensymbol,libreoffice-dev,libreoffice-dev-gui,libreoffice-dev-common,libreofficekit-dev,libreoffice-gtk3,gir1.2-lokdocview-0.1,liblibreofficekitgtk,libreofficekit-data,libreoffice-kf5,libreoffice-qt5,libreoffice-plasma,libreoffice-sdbc-postgresql,libreoffice-evolution,libreoffice-subsequentcheckbase,libreoffice-smoketest-data,libreoffice-librelogo,libreoffice-sdbc-firebird
+#Restrictions: build-needed, rw-build-tree, allow-stderr
+#
+## Those tests even work when there is no /usr/lib/libreoffice there in any way. @builddeps@ is enough.
+## That strictly violates the autopkgtest stuff thus mark them as superficial. But if a library
+## or whatever update broke it we should know
+#Tests: slowcheck
+#Architecture: amd64 arm64
+##Depends: @builddeps@, libreoffice,libreoffice-core,libreoffice-common,libreoffice-java-common,libreoffice-writer,libreoffice-calc,libreoffice-impress,libreoffice-draw,libreoffice-math,libreoffice-base-core,libreoffice-base,libreoffice-style-breeze,libreoffice-style-colibre,libreoffice-style-sifr,libreoffice-style-elementary,libreoffice-style-karasa-jaga,libreoffice-style-sukapura,libreoffice-gnome,python3-uno,libreoffice-script-provider-python,libreoffice-script-provider-bsh,libreoffice-script-provider-js,libreoffice-sdbc-hsqldb,libreoffice-sdbc-mysql,libreoffice-base-drivers,python3-access2base,libofficebean-java,uno-libs-private,libuno-sal3,libuno-cppu3,ure,ure-java,libunoloader-java,liblibreoffice-java,libreoffice-wiki-publisher,libreoffice-report-builder,libreoffice-report-builder-bin,libreoffice-nlpsolver,fonts-opensymbol,libreoffice-dev,libreoffice-dev-gui,libreoffice-dev-common,libreofficekit-dev,libreoffice-gtk3,gir1.2-lokdocview-0.1,liblibreofficekitgtk,libreofficekit-data,libreoffice-kf5,libreoffice-qt5,libreoffice-plasma,libreoffice-sdbc-postgresql,libreoffice-evolution,libreoffice-subsequentcheckbase,libreoffice-smoketest-data,libreoffice-librelogo,libreoffice-sdbc-firebird
+#Restrictions: build-needed, rw-build-tree, allow-stderr, superficial
+#
+#Tests: unitcheck
+#Architecture: amd64 arm64
+#Depends: @builddeps@, libreoffice,libreoffice-core,libreoffice-common,libreoffice-java-common,libreoffice-writer,libreoffice-calc,libreoffice-impress,libreoffice-draw,libreoffice-math,libreoffice-base-core,libreoffice-base,libreoffice-style-breeze,libreoffice-style-colibre,libreoffice-style-sifr,libreoffice-style-elementary,libreoffice-style-karasa-jaga,libreoffice-style-sukapura,libreoffice-gnome,python3-uno,libreoffice-script-provider-python,libreoffice-script-provider-bsh,libreoffice-script-provider-js,libreoffice-sdbc-hsqldb,libreoffice-sdbc-mysql,libreoffice-base-drivers,python3-access2base,libofficebean-java,uno-libs-private,libuno-sal3,libuno-cppu3,ure,ure-java,libunoloader-java,liblibreoffice-java,libreoffice-wiki-publisher,libreoffice-report-builder,libreoffice-report-builder-bin,libreoffice-nlpsolver,fonts-opensymbol,libreoffice-dev,libreoffice-dev-gui,libreoffice-dev-common,libreofficekit-dev,libreoffice-gtk3,gir1.2-lokdocview-0.1,liblibreofficekitgtk,libreofficekit-data,libreoffice-kf5,libreoffice-qt5,libreoffice-plasma,libreoffice-sdbc-postgresql,libreoffice-evolution,libreoffice-subsequentcheckbase,libreoffice-smoketest-data,libreoffice-librelogo,libreoffice-sdbc-firebird
+#Restrictions: build-needed, rw-build-tree, allow-stderr, superficial, skippable
+
+Test-Command: for i in /etc/apparmor.d/usr.lib.libreoffice.program.*; do /sbin/apparmor_parser --add --skip-cache --skip-kernel-load $i; done
+Features: test-name=apparmor-profiles-syntax-check
+Depends: libreoffice-common, apparmor
+Restrictions: allow-stderr, superficial
+
+## This one tests real connection to a MySQL and works by symlinking that one
+## specific library to the one in libreoffice-sdbc-mysql
+## Should probably always be last due to breaks-testbed?
+#Tests: cppunit-connectivity-mysql
+#Architecture: amd64 arm64
+#Depends: @builddeps@, pwgen, libreoffice-sdbc-mysql, libreoffice-core, default-mysql-server, default-mysql-client
+#Restrictions: build-needed, allow-stderr, needs-root, isolation-container, breaks-testbed, superficial
--- /dev/null
+Tests: testtools-bridgetest
+Depends: @builddeps@, ure
+Restrictions: allow-stderr, rw-build-tree, superficial
+
+Tests: pyuno-import, uno-import
+Depends: python3, python3-uno
+Restrictions: superficial
+
+Tests: access2base-import
+Depends: python3, python3-access2base
+Restrictions: superficial
+
+## Is there a need for this small test given we run the UI tests etc.?
+#Tests: smoketest
+#Architecture: %OOO_CHECK_FATAL_ARCHS%
+#Depends: @builddeps@, libreoffice-smoketest-data, libreoffice-dev, libreoffice-core, libreoffice-writer, libreoffice-calc, libreoffice-impress, libreoffice-math, libreoffice-base, libreoffice-sdbc-hsqldb, libreoffice-sdbc-firebird
+#Restrictions: allow-stderr, build-needed, rw-build-tree, superficial
+
+# this is already done by smoketest upstream, but fails when doing it against
+# the installed LO. works standalone, though, so it's patched out of the
+# smoketest. Do it here separately.
+Tests: test-extension
+Architecture: %OOO_NOGUI_ARCHS%
+Depends: libreoffice-core-nogui, libreoffice-common, libreoffice-java-common, libreoffice-smoketest-data, default-jdk
+Restrictions: allow-stderr, superficial, skippable
+
+Tests: test-extension-shared
+Architecture: %OOO_NOGUI_ARCHS%
+Depends: libreoffice-core-nogui, libreoffice-common, libreoffice-java-common, libreoffice-smoketest-data, default-jdk
+Restrictions: allow-stderr, needs-root, superficial
+
+# in the following some tests need RTL and CJK language packs installed to pass.
+# he is the example for RTL, zh-tw for CJK (and zh-tw was choosen to also test xx-YY locales)
+
+# Maybe all those tests should be merged into one (especially for the "small" ones like writerperfect or
+# "tiny" ones like sfx2,svx,cui.
+# But it already takes ~1.5 h (though including copy..) for all them to run on amd64 and the overall autopkgtest
+# test timeout is 166 min (a bit over 2.5 hrs.). What are we doing on slow archs?
+# And secondly. one might miss breakage if Java or another package is not installed but is
+# required because everything needed would be in Depends: then for one test...
+# Try to optimize a bit though by not sorting alphabetically but where the new packages are a superset so
+# we can reuse the testbed
+
+Tests: uicheck-sfx2
+Depends: @builddeps@, libreoffice-core, libreoffice-impress, python3-uno
+Restrictions: allow-stderr
+
+Tests: uicheck-svx
+Depends: @builddeps@, libreoffice-core, libreoffice-impress, python3-uno
+Restrictions: allow-stderr
+
+Tests: uicheck-cui
+Depends: @builddeps@, libreoffice-core, libreoffice-impress, libreoffice-writer, python3-uno
+Restrictions: allow-stderr
+
+Tests: uicheck-sd
+Depends: @builddeps@, libreoffice-core, libreoffice-draw, libreoffice-impress, libreoffice-calc, python3-uno
+Restrictions: allow-stderr
+
+Tests: uicheck-writerperfect
+Depends: @builddeps@, libreoffice-core, libreoffice-writer, python3-uno
+Restrictions: allow-stderr
+
+Tests: uicheck-sc
+Architecture: %OOO_JAVA_ARCHS%
+Depends: @builddeps@, libreoffice-core, libreoffice-calc, libreoffice-draw, python3-uno, libreoffice-l10n-he, libreoffice-l10n-zh-tw, libreoffice-java-common, libreoffice-writer
+Restrictions: allow-stderr
+
+Tests: uicheck-sw
+Architecture: %OOO_JAVA_ARCHS%
+Depends: @builddeps@, libreoffice-core, libreoffice-writer, libreoffice-draw, libreoffice-calc, libreoffice-base, python3-uno, libreoffice-l10n-he, libreoffice-l10n-zh-tw, libreoffice-librelogo, libreoffice-java-common
+Restrictions: allow-stderr, needs-internet
+
+Tests: uicheck-uitest
+Depends: @builddeps@, libreoffice-core, libreoffice-writer, libreoffice-calc, libreoffice-impress, libreoffice-math, libreoffice-base, python3-uno, libreoffice-l10n-he, libreoffice-l10n-zh-tw
+Restrictions: allow-stderr
+
+Tests: junit-subsequentcheck
+Architecture: %OOO_JUNIT_ARCHS%
+Depends: @builddeps@, libreoffice-core, libreoffice-writer, libreoffice-calc, libreoffice-impress, libreoffice-math, libreoffice-base, libreoffice-subsequentcheckbase, libreoffice-sdbc-hsqldb, libreoffice-sdbc-firebird
+Restrictions: allow-stderr, skippable
+
+Test-Command: export SYSTEM_UCPP=TRUE; export DOXYGEN=`command -v doxygen`; export ENABLE_JAVA=TRUE; export JDK=sun; export JAVADOC=/usr/lib/jvm/default-java/bin/javadoc; perl odk/util/check.pl /usr/lib/libreoffice/sdk
+Features: test-name=sdk-complete
+Depends: libreoffice-dev, libreoffice-dev-doc
+Restrictions: superficial
+
+Tests: odk-build-examples
+Architecture: %OOO_NOGUI_ARCHS%
+Depends: @builddeps@, libreoffice-core-nogui, libreoffice-dev, libreoffice-dev-doc, python3-uno
+Restrictions: allow-stderr, skippable
+
+Tests: odk-build-examples-java
+Architecture: %OOO_NOGUI_ARCHS%
+Depends: @builddeps@, libreoffice-core-nogui, libreoffice-dev, libreoffice-dev-doc, libreoffice-java-common, libofficebean-java
+Restrictions: allow-stderr, skippable
+
+#Tests: cppunit-subsequentcheck
+#Architecture: %OOO_CHECK_FATAL_ARCHS%
+#Depends: @builddeps@, %AUTOPKGTEST_CPPUNIT_PACKAGES%
+#Restrictions: build-needed, rw-build-tree, allow-stderr
+#
+## Those tests even work when there is no /usr/lib/libreoffice there in any way. @builddeps@ is enough.
+## That strictly violates the autopkgtest stuff thus mark them as superficial. But if a library
+## or whatever update broke it we should know
+#Tests: slowcheck
+#Architecture: %OOO_CHECK_FATAL_ARCHS%
+##Depends: @builddeps@, %AUTOPKGTEST_CPPUNIT_PACKAGES%
+#Restrictions: build-needed, rw-build-tree, allow-stderr, superficial
+#
+#Tests: unitcheck
+#Architecture: %OOO_CHECK_FATAL_ARCHS%
+#Depends: @builddeps@, %AUTOPKGTEST_CPPUNIT_PACKAGES%
+#Restrictions: build-needed, rw-build-tree, allow-stderr, superficial, skippable
+
+Test-Command: for i in /etc/apparmor.d/usr.lib.libreoffice.program.*; do /sbin/apparmor_parser --add --skip-cache --skip-kernel-load $i; done
+Features: test-name=apparmor-profiles-syntax-check
+Depends: libreoffice-common, apparmor
+Restrictions: allow-stderr, superficial
+
+## This one tests real connection to a MySQL and works by symlinking that one
+## specific library to the one in libreoffice-sdbc-mysql
+## Should probably always be last due to breaks-testbed?
+#Tests: cppunit-connectivity-mysql
+#Architecture: %OOO_CHECK_FATAL_ARCHS%
+#Depends: @builddeps@, pwgen, libreoffice-sdbc-mysql, libreoffice-core, default-mysql-server, default-mysql-client
+#Restrictions: build-needed, allow-stderr, needs-root, isolation-container, breaks-testbed, superficial
--- /dev/null
+#!/bin/bash
+
+# autopkgtest check: Run the connectivity "mysql" test
+# and prepare the db needed beforehand
+# (c) 2021 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+if [ -x /usr/bin/mariadbd-safe ]; then
+ db=mariadb
+ db_safe_command=mariadbd-safe
+ db_rundir=/run/mysqld
+else
+ db=mysql
+ db_safe_command=mysqld_safe
+ db_rundir=/var/run/mysqld
+fi
+db_user=root
+db_pw=`pwgen -1`
+db_name=test
+db_host=localhost
+db_port=3306
+db_conn_string="$db_user/$db_pw@sdbc:mysql:mysqlc:$db_host:$db_port/$db_name"
+
+trap "cleanup" ERR
+
+function cleanup() {
+ stop_db
+}
+
+function stop_db() {
+ service $db stop || true
+ # in case we are trying in a chroot without running autopkgtest for "quick" testing
+ if ischroot && test -f $db_rundir/mysqld.pid; then
+ kill `cat $db_rundir/mysqld.pid`
+ fi
+}
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo "====== Resetting $db_user password ======"
+$db_safe_command --skip-grant-tables &
+sleep 5 # wait for startup
+if test "$db" = "mariadb"; then
+ echo "FLUSH PRIVILEGES; SET PASSWORD FOR '$db_user'@'localhost' = PASSWORD('$db_pw');" | \
+ $db -v -u $db_user mysql
+else
+ echo "SET PASSWORD FOR '$db_user'@'localhost' = '$db_pw'; FLUSH PRIVILEGES;" | \
+ $db -v -u $db_user mysql
+fi
+
+stop_db
+
+service $db start
+
+set -e
+
+echo
+echo "====== Creating database "test" ======"
+echo "DROP DATABASE IF EXISTS $db_name; CREATE DATABASE $db_name;" | \
+ $db -v -u $db_user mysql
+
+# ensure we use the version from the package
+echo
+echo "====== Symlinking libraries... ======"
+#rene@frodo:~/LibreOffice/git/master$ objdump -p instdir/program/libmysqlclo.so | grep NEED
+# NEEDED libmariadb.so.3
+# NEEDED libuno_cppu.so.3
+# NEEDED libdbtoolslo.so
+# NEEDED libuno_sal.so.3
+# NEEDED libuno_salhelpergcc3.so.3
+# NEEDED libcomphelper.so
+# NEEDED libuno_cppuhelpergcc3.so.3
+# NEEDED libstdc++.so.6
+# NEEDED libm.so.6
+# NEEDED libgcc_s.so.1
+# NEEDED libpthread.so.0
+# NEEDED libc.so.6
+# VERNEED 0x0000000000004b28
+# VERNEEDNUM 0x0000000000000007
+cd $SRCDIR/instdir/program
+LIBS="libuno_cppu.so.3 libuno_sal.so.3 libuno_salhelpergcc3.so.3 libuno_cppuhelpergcc3.so.3 libmysqlclo.so"
+# FIXME: libdbtoolslo.so and libcomphelper.so are in libmerged.so with enable-mergelibs, thus do not
+# exist on 64bit...
+# Maybe until then this test shall only be run on 32bit?
+if [ "`dpkg-architecture -qDEB_HOST_ARCH_BITS`" = "32" ]; then
+ LIBS="$LIBS libdbtoolslo.so libcomphelper.so"
+ # done below
+else
+ LIBS="$LIBS libmergedlo.so"
+ ln -svf /usr/lib/libreoffice/program/libmergedlo.so libdbtoolslo.so
+ # DOESN'T WORK, CAUSES LINK ERROR
+ #ln -svf /usr/lib/libreoffice/program/libmergedlo.so libcomphelper.so
+fi
+for i in $LIBS; do \
+ ln -svf /usr/lib/libreoffice/program/$i; \
+done
+
+echo
+echo "====== Starting MySQL Test with ${CHECK_PARALLELISM} job ======"
+cd $SRCDIR/connectivity && \
+make -rj$CHECK_PARALLELISM CppunitTest_connectivity_mysql_test \
+ CONNECTIVITY_TEST_MYSQL_DRIVER="$db_conn_string" \
+ verbose=t || exit 1
+
+echo
+echo "====== Dropping database "test" ======"
+echo "DROP DATABASE test;" | \
+ $db -v -u $db_user mysql
+
+cleanup
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run junit base tests against an installed version of LibreOffice
+# (c) 2021 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ cd $SRCDIR
+ echo
+ echo "====== Unapplying the patches ======"
+ patch -p1 -R < ./debian/tests/patches/cppunit-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to only build the unittests against an existing installation ======"
+patch -p1 < ./debian/tests/patches/cppunit-standalone.diff
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo
+echo "====== Starting subsequentcheck with ${CHECK_PARALLELISM} job ======"
+
+# hack, otherwise it fails
+mkdir -p $SRCDIR/instdir/program/.dir
+mkdir -p $SRCDIR/instdir/program/services/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/simpress/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/ui/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/menubar/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/schart/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/schart/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/schart/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/schart/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/schart/ui/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/schart/menubar/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/dbaccess/ui/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbapp/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbapp/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbapp/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbapp/menubar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbbrowser/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbbrowser/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbbrowser/menubar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbquery/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbquery/menubar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbrelation/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbrelation/menubar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbtable/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbtable/menubar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbtdata/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbtdata/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/dbtdata/menubar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sabpilot/ui/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sbibliography/ui/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sbibliography/menubar/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/scanner/ui/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/spropctrlr/ui/.dir
+
+mkdir -p $SRCDIR/instdir/share/dtd/officedocument/1_0/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/StartModule/menubar/.dir
+
+mkdir -p $SRCDIR/instdir/program/opencl/.dir
+
+mkdir -p $SRCDIR/instdir/share/calc/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/scalc/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/scalc/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/scalc/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/scalc/ui/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/scalc/menubar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/simpress/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/webcast/.dir
+mkdir -p $SRCDIR/instdir/share/config/wizard/web/buttons/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sdraw/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sdraw/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sdraw/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sdraw/ui/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sdraw/menubar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/ui/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/menubar/.dir
+
+mkdir -p $SRCDIR/instdir/share/classification/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/sfx/ui/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/smath/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/smath/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/smath/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/smath/ui/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/smath/menubar/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/svt/ui/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/svx/ui/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sglobal/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sglobal/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sglobal/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sglobal/menubar/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sweb/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sweb/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sweb/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/sweb/menubar/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swform/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swform/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swform/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swform/menubar/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swreport/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swreport/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swreport/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swreport/menubar/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swriter/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swriter/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swriter/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swriter/ui/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swriter/menubar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swxform/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swxform/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swxform/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/swxform/menubar/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/xmlsec/ui/.dir
+
+mkdir -p $SRCDIR/instdir/share/registry/.dir
+mkdir -p $SRCDIR/instdir/share/registry/res/.dir
+
+mkdir -p $SRCDIR/instdir/share/emojiconfig/.dir
+
+cd $SRCDIR/instdir/program/resource && \
+ for i in `ls -1 | grep -v common`; do touch $i/LC_MESSAGES/.dir; done
+
+cd $SRCDIR
+
+# all modules containing subsequent(test|check).
+# Filter out:
+# - odk: already tested by odk-build-examples and odk/util/check.pl
+# - the junit tests - which are ran in an own test - by setting OOO_JUNIT_JAR to nothing (as --without-junit would do)
+# - solenv: no need to test gbuild2json...
+# - smoketest: done in the smoketest test
+export PARALLELISM=$CHECK_PARALLELISM
+for i in `grep subsequent */*.mk | cut -d"/" -f1 | grep -E -v '(odk|smoketest|solenv)' | sort | uniq | xargs`; do
+ echo
+ echo "====== Running subsequentcheck in module $i ======"; \
+ cd $i && \
+ make -rk subsequentcheck \
+ OOO_JUNIT_JAR= \
+ INSTDIR=/usr/lib/libreoffice \
+ verbose=t; \
+ cd ..;\
+done
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run junit base tests against an installed version of LibreOffice
+# (C) 2013 Canonical Ltd.
+# (c) 2015-2017 Software in the Public Interest, Inc.
+# Authors: Bjoern Michaelsen <bjoern.michaelsen@canonical.com>
+# Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+# skip on Zero using architectures
+if java -version 2>&1 | grep -q Zero; then
+ echo "Zero-using architecture. Skipping."
+ exit 77
+fi
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/junit-subsequentcheck-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to only build Java-based unittests against an existing installation ======"
+patch -p1 < ./debian/tests/patches/junit-subsequentcheck-standalone.diff
+
+if [ ! -f config_host.mk ]; then
+ echo
+ echo "====== Generating configuration ======="
+ rm -f config_host.mk
+ ./debian/rules config_host.mk enable_report_builder=no
+ sed -i 's/export OOO_JUNIT_JAR=.*/export OOO_JUNIT_JAR=\/usr\/share\/java\/junit4.jar/' config_host.mk
+fi
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting subsequentcheck with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+eval `grep PLATFORMID config_host.mk`
+
+export PARALLELISM=$CHECK_PARALLELISM
+make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ bridges_SELECTED_BRIDGE=gcc3_$PLATFORMID \
+ subsequentcheck verbose=t
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run the odk/build-examples check against an installed
+# version of the LibreOffice SDK
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+
+function unapply() {
+ cd $SRCDIR
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/odk-build-examples-standalone.diff
+}
+
+trap "unapply" ERR
+
+# skip if building as root:
+# unopkg errors out with "ERROR: Cannot run unopkg as root without --shared or --bundled option."
+# if ran as root
+if [ `id -u` = "0" ]; then
+ exit 77
+fi
+
+echo
+echo "====== Patching the tree to build the odk build-examples test against an existing installation ======"
+patch -p1 < ./debian/tests/patches/odk-build-examples-standalone.diff
+
+if [ ! -f config_host.mk ]; then
+ echo
+ echo "====== Generating configuration ======="
+ rm -f config_host.mk
+ ./debian/rules config_host.mk
+fi
+
+echo
+echo "====== Starting build with ${CHECK_PARALLELISM} job against /usr/lib/libreoffice/sdk ======"
+
+cd $SRCDIR/odk
+
+export PARALLELISM=$CHECK_PARALLELISM
+make -rk \
+ CustomTarget_odk/build-examples verbose=t
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run the odk/build-examples check against an installed
+# version of the LibreOffice SDK
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+# skip on Zero using architectures
+if java -version 2>&1 | grep -q Zero; then
+ echo "Zero-using architecture. Skipping."
+ exit 77
+fi
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+
+function unapply() {
+ cd $SRCDIR
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/odk-build-examples-standalone.diff
+}
+
+trap "unapply" ERR
+
+# skip if building as root:
+# unopkg errors out with "ERROR: Cannot run unopkg as root without --shared or --bundled option."
+# if ran as root
+if [ `id -u` = "0" ]; then
+ exit 77
+fi
+
+echo
+echo "====== Patching the tree to build the odk build-examples test against an existing installation ======"
+patch -p1 < ./debian/tests/patches/odk-build-examples-standalone.diff
+
+if [ ! -f config_host.mk ]; then
+ echo
+ echo "====== Generating configuration ======="
+ rm -f config_host.mk
+ ./debian/rules config_host.mk
+fi
+
+echo
+echo "====== Starting build with ${CHECK_PARALLELISM} job against /usr/lib/libreoffice/sdk ======"
+
+cd $SRCDIR/odk
+
+export PARALLELISM=$CHECK_PARALLELISM
+make -rk \
+ CustomTarget_odk/build-examples_java verbose=t
+
+unapply
+
--- /dev/null
+diff --git a/solenv/gbuild/Module.mk b/solenv/gbuild/Module.mk
+index 0d87ccc55379..41c6564d3d7e 100644
+--- a/solenv/gbuild/Module.mk
++++ b/solenv/gbuild/Module.mk
+@@ -338,10 +338,6 @@ define gb_Module_add_subsequentcheck_target
+ $(call gb_Module__read_targetfile,$(1),$(2),subsequentcheck target)
+
+ $(call gb_Module_get_subsequentcheck_target,$(1)) : $$(gb_Module_CURRENTTARGET)
+-$$(gb_Module_CURRENTTARGET) :| \
+- $(call gb_Postprocess_get_target,AllModulesButInstsetNative) \
+- $(call gb_Package_get_target,instsetoo_native_setup) \
+- $(call gb_Package_get_target,instsetoo_native_setup_ure)
+ $(call gb_Module_get_clean_target,$(1)) : $$(gb_Module_CURRENTCLEANTARGET)
+
+ endef
--- /dev/null
+diff -urN smoketest-old/data/Test_DB.xml smoketest/data/Test_DB.xml
+--- a/smoketest-old/data/Basic/Standard/Test_DB.xml 2011-12-20 16:05:52.000000000 +0000
++++ b/smoketest/data/Basic/Standard/Test_DB.xml 2011-12-29 23:09:08.000000000 +0000
+@@ -30,9 +30,6 @@
+
+ const cMessageDatabaseService = "Database Service"
+ const cMessageDatabaseOpen = "Open Database"
+-const cMessageDatabaseInsert = "Insert record into Database"
+-const cMessageDatabaseDelete = "Delete record from Database"
+-const cMessageDatabaseSeek = "Read other record from Database"
+ const cMessageDatabaseClose = "Close Database"
+
+ Sub TestDB
+@@ -81,48 +78,6 @@
+ LogTestResult( "Database "+ cMessageDatabaseService, TRUE )
+ End If
+
+- gCurrentTestCase = cDBInsert
+- sCurrentMessage = cMessageDatabaseInsert
+-
+- oRowSet.ActiveConnection = oDBConnection
+-
+- oRowSet.CommandType = com.sun.star.sdb.CommandType.COMMAND
+- oRowSet.Command = "SELECT * FROM " + sTable
+- oRowSet.execute()
+-
+- oRowSet.moveToInsertRow
+- oRowSet.updateString(5, sTestString)
+-
+- oRowSet.insertRow()
+- nRowCount=oRowSet.RowCount
+-
+- oRowSet.moveToCurrentRow()
+-
+- bResult = (oRowSet.getString(5) = sTestString)
+- LogTestResult( "Database "+ cMessageDatabaseInsert, bResult )
+-
+- 'delete only if insert passed
+-
+- if (bResult) Then
+- gCurrentTestCase = cDBDelete
+- sCurrentMessage = cMessageDatabaseDelete
+- oRowSet.deleteRow()
+- bResult = (nRowCount - oRowSet.RowCount = 0)
+- if ( bResult ) Then
+- oRowSet.next()
+- bResult = (nRowCount - oRowSet.RowCount = 1)
+- End If
+- LogTestResult( "Database "+ cMessageDatabaseDelete, bResult )
+- End If
+-
+- ' read other record
+-
+- gCurrentTestCase = cDBSeek
+- sCurrentMessage = cMessageDatabaseSeek
+- oRowSet.first()
+- bResult = not (oRowSet.getString(5) = sTestString)
+- LogTestResult( "Database "+ cMessageDatabaseSeek, bResult )
+-
+ gCurrentTestCase = cDBClose
+ sCurrentMessage = cMessageDatabaseClose
+ oDBConnection.Dispose()
+diff --git a/dbaccess/Module_dbaccess.mk b/dbaccess/Module_dbaccess.mk
+index 204854748ec1..992ae1ed17c2 100644
+--- a/dbaccess/Module_dbaccess.mk
++++ b/dbaccess/Module_dbaccess.mk
+@@ -32,63 +32,11 @@ $(eval $(call gb_Module_add_l10n_targets,dbaccess,\
+ AllLangMoTarget_dba \
+ ))
+
+-ifneq ($(OS),iOS)
+-ifeq ($(ENABLE_FIREBIRD_SDBC),TRUE)
+-# remove if we have a be file for this
+-ifeq ($(ENDIANNESS),little)
+-$(eval $(call gb_Module_add_check_targets,dbaccess,\
+- CppunitTest_dbaccess_firebird_regression_test \
+-))
+-endif
+-$(eval $(call gb_Module_add_check_targets,dbaccess,\
+- CppunitTest_dbaccess_firebird_test \
+-))
+-endif
+-
+-$(eval $(call gb_Module_add_check_targets,dbaccess,\
+- CppunitTest_dbaccess_dialog_save \
+- CppunitTest_dbaccess_empty_stdlib_save \
+- CppunitTest_dbaccess_nolib_save \
+- CppunitTest_dbaccess_macros_test \
+- CppunitTest_dbaccess_hsqlschema_import \
+-))
+-
+-ifeq ($(ENABLE_JAVA),TRUE)
+-$(eval $(call gb_Module_add_check_targets,dbaccess,\
+- CppunitTest_dbaccess_hsqldb_test \
+- CppunitTest_dbaccess_RowSetClones \
+-))
+-endif
+-
+-# This runs a suite of performance tests on embedded firebird and HSQLDB.
+-# Instructions on running the test can be found in qa/unit/embeddedb_performancetest
+-ifeq ($(ENABLE_FIREBIRD_SDBC),TRUE)
+-ifeq ($(ENABLE_JAVA),TRUE)
+-$(eval $(call gb_Module_add_check_targets,dbaccess,\
+- CppunitTest_dbaccess_embeddeddb_performancetest \
+-))
+-endif
+-endif
+-
+-$(eval $(call gb_Module_add_subsequentcheck_targets,dbaccess,\
+- JunitTest_dbaccess_complex \
+- JunitTest_dbaccess_unoapi \
+-))
+-
+-ifneq ($(DISABLE_PYTHON),TRUE)
+-ifneq ($(ENABLE_JAVA),)
+-$(eval $(call gb_Module_add_subsequentcheck_targets,dbaccess,\
+- PythonTest_dbaccess_python \
+-))
+-endif
+-endif
+-
+ # screenshots
+ $(eval $(call gb_Module_add_screenshot_targets,dbaccess,\
+ CppunitTest_dbaccess_dialogs_test \
+ ))
+
+-endif
+ endif
+
+ # vim: set noet sw=4 ts=4:
--- /dev/null
+diff --git a/extras/source/truetype/symbol/fc_local.snippet b/extras/source/truetype/symbol/fc_local.snippet
+index 5b29e1d58744..acf37fcfc192 100644
+--- a/extras/source/truetype/symbol/fc_local.snippet
++++ b/extras/source/truetype/symbol/fc_local.snippet
+@@ -4,3 +4,8 @@
+ <string>OpenSymbol</string>
+ </edit>
+ </match>
++<!-- work around fontconfig 2.14.1-3 (probably all of 2.14.1) enabling this unconditionally.
++The testSimpleText test doesn't expect that -->
++<match target="font">
++ <edit name="rgba" mode="delete"><const>rgb</const></edit>
++</match>
--- /dev/null
+From fef2f669c1e861c685d22c18319514cec9f9f8c3 Mon Sep 17 00:00:00 2001
+From: Bjoern Michaelsen <bjoern.michaelsen@canonical.com>
+Date: Wed, 28 Jan 2015 12:11:16 +0100
+Subject: [PATCH] run subsequentcheck standalone against installed version as
+ integration test
+Last-Update: 2017-05-17
+
+Forwarded: partially, where there is generic use for it
+---
+ jurt/Module_jurt.mk | 2 +-
+ postprocess/Module_postprocess.mk | 4 ++--
+ solenv/gbuild/JavaClassSet.mk | 2 +-
+ solenv/gbuild/JunitTest.mk | 2 +-
+ solenv/gbuild/Module.mk | 3 +++
+ solenv/gbuild/extensions/post_SkipBuild.mk | 18 ++++++++++++++++++
+ solenv/gbuild/platform/unxgcc.mk | 1 +
+ 7 files changed, 27 insertions(+), 5 deletions(-)
+ create mode 100644 solenv/gbuild/extensions/post_SkipBuild.mk
+
+diff --git a/ridljar/Module_ridljar.mk b/ridljar/Module_ridljar.mk
+index daa0f1835be7..c4186e900a87 100644
+--- a/ridljar/Module_ridljar.mk
++++ b/ridljar/Module_ridljar.mk
+@@ -16,7 +16,7 @@ $(eval $(call gb_Module_add_targets,ridljar,\
+ Jar_unoloader \
+ ))
+
+-$(eval $(call gb_Module_add_check_targets,ridljar,\
++#$(eval $(call gb_Module_add_check_targets,ridljar,\
+ CustomTarget_test_urp \
+ InternalUnoApi_test_urp \
+ JunitTest_bridgefactory \
+diff --git a/postprocess/Module_postprocess.mk b/postprocess/Module_postprocess.mk
+index 0fbede6a9f2b..4c3abc52747c 100644
+--- a/postprocess/Module_postprocess.mk
++++ b/postprocess/Module_postprocess.mk
+@@ -12,19 +12,19 @@ $(eval $(call gb_Module_Module,postprocess))
+ # UGLY: postprocess_XCDS variable from CustomTarget_registry
+ # is reused in Package_registry!
+
+-$(eval $(call gb_Module_add_targets,postprocess,\
++#$(eval $(call gb_Module_add_targets,postprocess,\
+ $(if $(ENABLE_CUSTOMTARGET_COMPONENTS),CustomTarget_components) \
+ CustomTarget_registry \
+ Rdb_services \
+-))
+-ifeq ($(gb_Side),host)
+-$(eval $(call gb_Module_add_targets,postprocess,\
++#))
++#ifeq ($(gb_Side),host)
++#$(eval $(call gb_Module_add_targets,postprocess,\
+ CustomTarget_images \
+ Package_images \
+-))
+-endif
++#))
++#endif
+
+-$(eval $(call gb_Module_add_l10n_targets,postprocess,\
++#$(eval $(call gb_Module_add_l10n_targets,postprocess,\
+ Package_registry \
+ ))
+
+diff --git a/solenv/gbuild/JavaClassSet.mk b/solenv/gbuild/JavaClassSet.mk
+index cff4299bf06e..76765351abdd 100644
+--- a/solenv/gbuild/JavaClassSet.mk
++++ b/solenv/gbuild/JavaClassSet.mk
+@@ -46,7 +46,7 @@ $(call gb_Helper_abbreviate_dirs,\
+ $(filter-out $(JARDEPS) $(T_JAVA9FILES),$(4))) && \
+ $(if $(3),$(call gb_JavaClassSet_JAVACCOMMAND,$(JAVA_TARGET_VER)) \
+ $(gb_JavaClassSet_JAVACDEBUG) \
+- -classpath "$(T_CP)$(gb_CLASSPATHSEP)$(call gb_JavaClassSet_get_classdir,$(2))" \
++ -classpath "$(T_CP)$(gb_CLASSPATHSEP)$(call gb_JavaClassSet_get_classdir,$(2))$(gb_CLASSPATHSEP)$(shell echo $(wildcard /usr/lib/libreoffice/program/classes/*.jar) | sed -e s/\ /:/g)" \
+ -d $(call gb_JavaClassSet_get_classdir,$(2)) \
+ @$$RESPONSEFILE &&) \
+ rm -f $$RESPONSEFILE &&) \
+@@ -55,7 +55,7 @@ $(call gb_Helper_abbreviate_dirs,\
+ $(T_JAVA9FILES)) && \
+ $(if $(3),$(call gb_JavaClassSet_JAVACCOMMAND,9) \
+ $(gb_JavaClassSet_JAVACDEBUG) \
+- -classpath "$(T_CP)$(gb_CLASSPATHSEP)$(call gb_JavaClassSet_get_classdir,$(2))" \
++ -classpath "$(T_CP)$(gb_CLASSPATHSEP)$(call gb_JavaClassSet_get_classdir,$(2))$(gb_CLASSPATHSEP)$(shell echo $(wildcard /usr/lib/libreoffice/program/classes/*.jar) | sed -e s/\ /:/g)" \
+ --module-path "$(T_CP)$(gb_CLASSPATHSEP)$(call gb_JavaClassSet_get_classdir,$(2))" \
+ $(if $(T_MODULENAME),--patch-module $(T_MODULENAME)="$(subst $(WHITESPACE),$(gb_CLASSPATHSEP),$(strip $(dir $(PACKAGEDIRS))))") \
+ -d $(call gb_JavaClassSet_get_classdir,$(2)) \
+--- a/solenv/gbuild/JunitTest.mk
++++ b/solenv/gbuild/JunitTest.mk
+@@ -55,7 +55,7 @@ $(call gb_JunitTest_get_target,%) :
+ endif
+
+ define gb_JunitTest_JunitTest
+-$(call gb_JunitTest_get_target,$(1)) : T_CP := $(call gb_JavaClassSet_get_classdir,$(call gb_JunitTest_get_classsetname,$(1)))$$(gb_CLASSPATHSEP)$(OOO_JUNIT_JAR)$(if $(HAMCREST_JAR),$$(gb_CLASSPATHSEP)$(HAMCREST_JAR))$$(gb_CLASSPATHSEP)$(INSTROOT)/$(LIBO_URE_LIB_FOLDER)
++$(call gb_JunitTest_get_target,$(1)) : T_CP := $(call gb_JavaClassSet_get_classdir,$(call gb_JunitTest_get_classsetname,$(1)))$$(gb_CLASSPATHSEP)$(OOO_JUNIT_JAR)$(if $(HAMCREST_JAR),$$(gb_CLASSPATHSEP)$(HAMCREST_JAR))$$(gb_CLASSPATHSEP)$(INSTROOT)/$(LIBO_URE_LIB_FOLDER)$(gb_CLASSPATHSEP)$(shell echo $(wildcard /usr/lib/libreoffice/program/classes/*.jar) | sed -e s/\ /:/g)
+ $(call gb_JunitTest_get_target,$(1)) : CLASSES :=
+ $(eval $(call gb_JunitTest_JunitTest_platform,$(1)))
+
+--- a/solenv/gbuild/Module.mk
++++ b/solenv/gbuild/Module.mk
+@@ -336,15 +336,16 @@ endef
+ # has order dependency on AllModulesButInstsetNative to be able to run
+ # subsequentcheck in the same make process on "make check"
+ define gb_Module_add_subsequentcheck_target
++ifeq (,$(filter-out JavaClassSet% JunitTest%,$(2)))
+ $(call gb_Module__read_targetfile,$(1),$(2),subsequentcheck target)
+
+ $(call gb_Module_get_subsequentcheck_target,$(1)) : $$(gb_Module_CURRENTTARGET)
+ $$(gb_Module_CURRENTTARGET) :| \
+- $(call gb_Postprocess_get_target,AllModulesButInstsetNative) \
+- $(call gb_Package_get_target,instsetoo_native_setup) \
+- $(call gb_Package_get_target,instsetoo_native_setup_ure)
++ $(call gb_Postprocess_get_target,AllModulesButInstsetNative)
+ $(call gb_Module_get_clean_target,$(1)) : $$(gb_Module_CURRENTCLEANTARGET)
+
++endif
++
+ endef
+
+ define gb_Module_add_stagingcheck_target
+--- /dev/null
++++ b/solenv/gbuild/extensions/post_SkipBuild.mk
+@@ -0,0 +1,18 @@
++# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
++#
++# This file is part of the LibreOffice project.
++#
++# This Source Code Form is subject to the terms of the Mozilla Public
++# License, v. 2.0. If a copy of the MPL was not distributed with this
++# file, You can obtain one at http://mozilla.org/MPL/2.0/.
++#
++
++# we dont want to bother with these for integration tests
++gb_Module_add_target =
++gb_Module_add_l10n_target =
++gb_Module_add_check_target =
++gb_Module_add_slowcheck_target =
++gb_JavaClassSet_use_jar =
++gb_JunitTest_use_jar =
++
++# vim: set noet sw=4 ts=4:
--- /dev/null
+diff --git a/odk/build-examples_common.mk b/odk/build-examples_common.mk
+index 931d6eea856e..2749b6930079 100644
+--- a/odk/build-examples_common.mk
++++ b/odk/build-examples_common.mk
+@@ -45,7 +45,7 @@ else
+ && export \
+ UserInstallation=$(call gb_Helper_make_url,$(call gb_CustomTarget_get_workdir,$(1))/user) \
+ $(foreach my_dir,$(2), \
+- && (cd $(INSTDIR)/$(SDKDIRNAME)/examples/$(my_dir) \
++ && (cd /usr/lib/libreoffice/sdk/examples/$(my_dir) \
+ && printf 'yes\n' | LC_ALL=C make -j1 \
+ CC="$(CXX)" LINK="$(CXX)" LIB="$(CXX)" \
+ $(if $(MACOSX_SHELL_HACK), SHELL="$$$$ODK_BUILD_SHELL", ))) \
+@@ -43,17 +43,17 @@ endif
+ endif
+
+ $(call gb_CustomTarget_get_workdir,$(1))/setsdkenv: \
+- $(SRCDIR)/odk/config/setsdkenv_unix.sh.in \
++ /usr/lib/libreoffice/sdk//setsdkenv_unix.sh.in \
+ $(BUILDDIR)/config_$(gb_Side).mk | \
+ $(call gb_CustomTarget_get_workdir,$(1))/.dir
+ $$(call gb_Output_announce,$(subst $(WORKDIR)/,,$(1)),$(true),SED,1)
+ sed -e 's!@OO_SDK_NAME@!sdk!' \
+- -e 's!@OO_SDK_HOME@!$(INSTDIR)/$(SDKDIRNAME)!' \
+- -e 's!@OFFICE_HOME@!$(INSTROOTBASE)!' -e 's!@OO_SDK_MAKE_HOME@!!' \
++ -e 's!@OO_SDK_HOME@!/usr/lib/libreoffice/sdk!' \
++ -e 's!@OFFICE_HOME@!/usr/lib/libreoffice!' -e 's!@OO_SDK_MAKE_HOME@!!' \
+ -e 's!@OO_SDK_ZIP_HOME@!!' -e 's!@OO_SDK_CAT_HOME@!!' \
+ -e 's!@OO_SDK_SED_HOME@!!' -e 's!@OO_SDK_CPP_HOME@!!' \
+ -e 's!@OO_SDK_JAVA_HOME@!$(JAVA_HOME)!' \
+- -e 's!@OO_SDK_OUTPUT_DIR@!$(call gb_CustomTarget_get_workdir,$(1))/out!' \
++ -e 's!@OO_SDK_OUTPUT_DIR@!$(shell mktemp -q -d)/out!' \
+ -e 's!@SDK_AUTO_DEPLOYMENT@!YES!' $$< > $$@
+
+ .PHONY: $(call gb_CustomTarget_get_target,$(1))
+diff --git a/solenv/gbuild/Module.mk b/solenv/gbuild/Module.mk
+index 4073dcfd9bf5..68c17ce0d1ed 100644
+--- a/solenv/gbuild/Module.mk
++++ b/solenv/gbuild/Module.mk
+@@ -339,10 +339,6 @@ define gb_Module_add_subsequentcheck_target
+ $(call gb_Module__read_targetfile,$(1),$(2),subsequentcheck target)
+
+ $(call gb_Module_get_subsequentcheck_target,$(1)) : $$(gb_Module_CURRENTTARGET)
+-$$(gb_Module_CURRENTTARGET) :| \
+- $(call gb_Postprocess_get_target,AllModulesButInstsetNative) \
+- $(call gb_Package_get_target,instsetoo_native_setup) \
+- $(call gb_Package_get_target,instsetoo_native_setup_ure)
+ $(call gb_Module_get_clean_target,$(1)) : $$(gb_Module_CURRENTCLEANTARGET)
+
+ endef
--- /dev/null
+--- smoketest/data/Basic/Standard/Test_Ext.xml 2012-02-01 13:56:49.000000000 +0100
++++ smoketest/data/Basic/Standard/Test_Ext.xml 2012-02-20 20:15:23.000000000 +0100
+@@ -28,10 +28,6 @@
+ <!DOCTYPE script:module PUBLIC "-//OpenOffice.org//DTD OfficeDocument 1.0//EN" "module.dtd">
+ <script:module xmlns:script="http://openoffice.org/2000/script" script:name="Test_Ext" script:language="StarBasic">REM ***** BASIC *****
+
+-const cMessageExtensionService = "Extension Service"
+-const cMessageExtensionInstall = "Install Extension"
+-const cMessageExtensionUninstall = "Uninstall Extension"
+-
+ Sub TestExtensions
+ Dim oTestExtension as Object, obj_null as Object
+ Dim sCurrentMessage as String
+@@ -37,9 +37,6 @@
+ Dim sCurrentMessage as String
+ Dim bResult as Boolean
+ Dim sImplementationNameString as String
+- sImplementationNameString = cUnoSmoketestTestExtension + "$_TestExtension"
+-
+- On Local Error GoTo EXTERROR
+
+ gCurrentTestCase = cLogfileFailed
+ LocalTestLog% = OpenLogDat (GetLogFileName(gCurrentDocTest))
+@@ -35,74 +35,5 @@
+ gCurrentTestCase = cLogfileFailed
+ LocalTestLog% = OpenLogDat (GetLogFileName(gCurrentDocTest))
+
+- sCurrentMessage = "SmokeTestCommandEnvironment (implemented in Java)"
+- gCurrentTestCase = cEXTService
+-
+- 'Create an implementation of com.sun.star.ucb.XCommandEnvironment which is needed for
+- 'adding the extension. The implementation is in
+- 'smoketest/org/libreoffice/smoketest/SmoketestCommandEnvironment.java and the code is in smoketest.jar
+- cmdEnv = createUnoService(cUnoSmoketestCommandEnvironment)
+-
+- 'Create the component context and then get the singleton ExtensionManager
+- 'A singleton cannot be created with createUnoService
+- sCurrentMessage = cMessageExtensionService
+- ctx = getDefaultContext
+- ext_mgr = ctx.getValueByName("/singletons/" + cExtensionManager)
+-
+- LogTestResult( "Extension "+ cMessageExtensionService, not IsNull (ext_mgr) )
+- if (IsNull(ext_mgr)) then
+- Close #LocalTestLog%
+- LocalTestLog = 0
+- Exit Sub
+- End If
+-
+- sCurrentMessage = cMessageExtensionInstall
+- gCurrentTestCase = cEXTInstall
+-
+- 'Add the extension. We must provide a file URL here.
+- 'By passing "user" we determine that the actions we perform on
+- 'XExtensionManager only affect the user installation. To modify the share installation one would pass "share".
+-
+- Dim props() as Object
+- ext_mgr.addExtension(sExtensionURL, props, "user", obj_null, cmdEnv)
+-
+- 'Check if the extension has been added by creating a service which is contained in the extension.
+- oTestExtension = createUnoService(cUnoSmoketestTestExtension)
+- bResult = (oTestExtension.getImplementationName = sImplementationNameString)
+- LogTestResult( "Extension "+ cMessageExtensionInstall, bResult )
+- if (not bResult) then
+- Close #LocalTestLog%
+- LocalTestLog = 0
+- Exit Sub
+- End If
+-
+- sCurrentMessage = cMessageExtensionUninstall
+- gCurrentTestCase = cEXTUninstall
+-
+- 'Remove the package
+- ext_mgr.removeExtension("org.libreoffice.smoketest.TestExtension", cExtensionFileName, "user",obj_null, cmdEnv)
+-
+- 'Try to create the service which is contained in the now removed extension.
+- oTestExtension = createUnoService(cUnoSmoketestTestExtension)
+-
+- 'The service must not be available anymore. Therefore isNull must return true.
+- LogTestResult( "Extension "+ cMessageExtensionUninstall, IsNull (oTestExtension) )
+-
+- Print #LocalTestLog, "---"
+- Close #LocalTestLog%
+- LocalTestLog = 0
+- Exit Sub ' Without error
+-
+- EXTERROR:
+- If ( gCurrentTestCase = cLogfileFailed ) then
+- LogTestResult( " ", False )
+- Exit Sub
+- else
+- LogTestResult( "Extension "+ sCurrentMessage, False )
+- Close #LocalTestLog%
+- LocalTestLog = 0
+- End If
+- Exit Sub ' With error
+-
+ End Sub
+ </script:module>
--- /dev/null
+diff --git a/smoketest/CppunitTest_smoketest.mk b/smoketest/CppunitTest_smoketest.mk
+index f7d64cae562f..9d47776ffb4b 100644
+--- a/smoketest/CppunitTest_smoketest.mk
++++ b/smoketest/CppunitTest_smoketest.mk
+@@ -34,10 +34,10 @@ userinstallation=$(WORKDIR)/CustomTarget/smoketest
+ endif
+
+ $(eval $(call gb_CppunitTest_add_arguments,smoketest,\
+- -env:arg-soffice=$(gb_JunitTest_SOFFICEARG) \
++ -env:arg-soffice=$(OOO_TEST_SOFFICE) \
+ -env:arg-user=$(userinstallation) \
+ -env:arg-env=$(gb_Helper_LIBRARY_PATH_VAR)"$$$${$(gb_Helper_LIBRARY_PATH_VAR)+=$$$$$(gb_Helper_LIBRARY_PATH_VAR)}" \
+- -env:arg-testarg.smoketest.doc=$(WORKDIR)/Zip/smoketestdoc.sxw \
++ -env:arg-testarg.smoketest.doc=/usr/share/libreoffice/smoketestdoc.sxw \
+ ))
+
+ $(call gb_CppunitTest_get_target,smoketest): \
--- /dev/null
+diff --git a/testtools/CustomTarget_bridgetest.mk b/testtools/CustomTarget_bridgetest.mk
+index d090146ec411..1cb4d30dcc2a 100644
+--- a/testtools/CustomTarget_bridgetest.mk
++++ b/testtools/CustomTarget_bridgetest.mk
+@@ -28,7 +28,7 @@ $(testtools_BRIDGEDIR)/bridgetest_server$(testtools_BATCHSUFFIX) :| $(testtools_
+ $(call gb_Trace_StartRange,$(subst $(WORKDIR)/,,$@),ECH)
+ $(call gb_Helper_abbreviate_dirs,\
+ echo \
+- "$(call gb_Executable_get_target_for_build,uno)" \
++ "/usr/lib/libreoffice/program/uno" \
+ "-s com.sun.star.test.bridge.CppTestObject" \
+ "-u 'uno:socket$(COMMA)host=127.0.0.1$(COMMA)port=2002;urp;test'" \
+ "--singleaccept" \
+@@ -59,7 +59,7 @@ $(testtools_BRIDGEDIR)/bridgetest_inprocess_java$(testtools_BATCHSUFFIX) :| $(te
+ $(call gb_Trace_StartRange,$(subst $(WORKDIR)/,,$@),ECH)
+ $(call gb_Helper_abbreviate_dirs,\
+ echo "JAVA_HOME=$(JAVA_HOME)" \
+- "$(call gb_Executable_get_target_for_build,uno)" \
++ "/usr/lib/libreoffice/program/uno" \
+ "-s com.sun.star.test.bridge.BridgeTest" \
+ "-env:LO_BUILD_LIB_DIR=$(call gb_Helper_make_url,$(gb_Library_WORKDIR_FOR_BUILD))" \
+ "-env:URE_MORE_SERVICES=$(call gb_Helper_make_url,$(call gb_Rdb_get_target,uno_services))" \
+@@ -72,7 +72,7 @@ $(testtools_BRIDGEDIR)/bridgetest_client$(testtools_BATCHSUFFIX) :| $(testtools_
+ $(call gb_Trace_StartRange,$(subst $(WORKDIR)/,,$@),ECH)
+ $(call gb_Helper_abbreviate_dirs,\
+ echo \
+- "$(call gb_Executable_get_target_for_build,uno)" \
++ "/usr/lib/libreoffice/program/uno" \
+ "-s com.sun.star.test.bridge.BridgeTest --" \
+ "-u 'uno:socket$(COMMA)host=127.0.0.1$(COMMA)port=2002;urp;test'" \
+ "-env:LO_BUILD_LIB_DIR=$(call gb_Helper_make_url,$(gb_Library_WORKDIR_FOR_BUILD))" \
+diff --git a/testtools/CustomTarget_uno_test.mk b/testtools/CustomTarget_uno_test.mk
+index 4850e5ca66b2..610a0b170e90 100644
+--- a/testtools/CustomTarget_uno_test.mk
++++ b/testtools/CustomTarget_uno_test.mk
+@@ -12,18 +12,12 @@ $(eval $(call gb_CustomTarget_CustomTarget,testtools/uno_test))
+ # this target is phony to run it every time
+ .PHONY : $(call gb_CustomTarget_get_target,testtools/uno_test)
+
+-$(call gb_CustomTarget_get_target,testtools/uno_test) : \
+- $(call gb_Executable_get_runtime_dependencies,uno) \
+- $(call gb_InternalUnoApi_get_target,bridgetest) \
+- $(call gb_Package_get_target,instsetoo_native_setup_ure) \
+- $(call gb_Rdb_get_target,uno_services) \
+- $(call gb_Rdb_get_target,ure/services) \
+- $(call gb_UnoApi_get_target,udkapi)
++$(call gb_CustomTarget_get_target,testtools/uno_test) :
+ ifneq ($(gb_SUPPRESS_TESTS),)
+ @true
+ else
+ $(call gb_Helper_abbreviate_dirs,\
+- $(call gb_Executable_get_command,uno) \
++ /usr/lib/libreoffice/program/uno \
+ -s com.sun.star.test.bridge.BridgeTest \
+ -- com.sun.star.test.bridge.CppTestObject \
+ -env:LO_BUILD_LIB_DIR=$(call gb_Helper_make_url,$(gb_Library_WORKDIR_FOR_BUILD)) \
+#diff --git a/testtools/Library_bridgetest-common.mk b/testtools/Library_bridgetest-common.mk
+#index 1ca38bca6b49..cbc793c36d39 100644
+#--- a/testtools/Library_bridgetest-common.mk
+#+++ b/testtools/Library_bridgetest-common.mk
+#@@ -20,16 +20,6 @@ $(eval $(call gb_Library_use_internal_api,testtools_bridgetest-common,\
+# bridgetest \
+# ))
+#
+#-$(eval $(call gb_Library_use_libraries,testtools_bridgetest-common, \
+#- cppu \
+#- cppuhelper \
+#- sal \
+#-))
+#-
+#-$(eval $(call gb_Library_use_api,testtools_bridgetest-common,\
+#- udkapi \
+#-))
+#-
+# $(eval $(call gb_Library_add_exception_objects,testtools_bridgetest-common,\
+# testtools/source/bridgetest/currentcontextchecker \
+# testtools/source/bridgetest/multi \
+#diff --git a/testtools/Library_bridgetest.mk b/testtools/Library_bridgetest.mk
+#index 52f335761fdf..f0bafca0998f 100644
+#--- a/testtools/Library_bridgetest.mk
+#+++ b/testtools/Library_bridgetest.mk
+#@@ -15,16 +15,9 @@ $(eval $(call gb_Library_use_internal_api,testtools_bridgetest,\
+# bridgetest \
+# ))
+#
+#-$(eval $(call gb_Library_use_api,testtools_bridgetest,\
+#- udkapi \
+#-))
+#-
+# $(eval $(call gb_Library_use_external,testtools_bridgetest,boost_headers))
+#
+# $(eval $(call gb_Library_use_libraries,testtools_bridgetest,\
+#- cppu \
+#- cppuhelper \
+#- sal \
+# testtools_bridgetest-common \
+# ))
+#
+#diff --git a/testtools/Library_constructors.mk b/testtools/Library_constructors.mk
+#index 516c05d62db8..3a2a4b8bca24 100644
+#--- a/testtools/Library_constructors.mk
+#+++ b/testtools/Library_constructors.mk
+#@@ -22,16 +22,6 @@ $(eval $(call gb_Library_use_internal_api,testtools_constructors,\
+# bridgetest \
+# ))
+#
+#-$(eval $(call gb_Library_use_api,testtools_constructors,\
+#- udkapi \
+#-))
+#-
+#-$(eval $(call gb_Library_use_libraries,testtools_constructors,\
+#- cppu \
+#- cppuhelper \
+#- sal \
+#-))
+#-
+# $(eval $(call gb_Library_add_exception_objects,testtools_constructors,\
+# testtools/source/bridgetest/constructors \
+# ))
+#diff --git a/testtools/Library_cppobj.mk b/testtools/Library_cppobj.mk
+#index 086b1fa0b6f5..9348254b6da8 100644
+#--- a/testtools/Library_cppobj.mk
+#+++ b/testtools/Library_cppobj.mk
+#@@ -20,16 +20,9 @@ $(eval $(call gb_Library_use_internal_api,testtools_cppobj,\
+# bridgetest \
+# ))
+#
+#-$(eval $(call gb_Library_use_api,testtools_cppobj,\
+#- udkapi \
+#-))
+#-
+# $(eval $(call gb_Library_use_external,testtools_cppobj,boost_headers))
+#
+# $(eval $(call gb_Library_use_libraries,testtools_cppobj,\
+#- cppu \
+#- cppuhelper \
+#- sal \
+# testtools_bridgetest-common \
+# ))
+#
+#diff --git a/unoidl/Executable_unoidl-check.mk b/unoidl/Executable_unoidl-check.mk
+#index 36dfc44de635..a1bb6ed14d80 100644
+#--- a/unoidl/Executable_unoidl-check.mk
+#+++ b/unoidl/Executable_unoidl-check.mk
+#@@ -15,10 +15,13 @@ $(eval $(call gb_Executable_add_exception_objects,unoidl-check, \
+#
+# $(eval $(call gb_Executable_use_libraries,unoidl-check, \
+# unoidl \
+#- $(if $(filter TRUE,$(DISABLE_DYNLOADING)),reg) \
+#- $(if $(filter TRUE,$(DISABLE_DYNLOADING)),store) \
+#- salhelper \
+#- sal \
+#+))
+#+
+#+$(eval $(call gb_Executable_add_ldflags,unoidl-check, \
+#+ $(if $(filter TRUE,$(DISABLE_DYNLOADING)),-L/usr/lib/libreoffice/program/ -lreglo) \
+#+ $(if $(filter TRUE,$(DISABLE_DYNLOADING)),-L/usr/lib/libreoffice/program/ -lstorelo) \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_sal \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_salhelpergcc3 \
+# ))
+#
+# # vim: set noet sw=4 ts=4:
+#diff --git a/unoidl/Executable_unoidl-read.mk b/unoidl/Executable_unoidl-read.mk
+#index b134c30b1a72..2bfd0ea3057f 100644
+#--- a/unoidl/Executable_unoidl-read.mk
+#+++ b/unoidl/Executable_unoidl-read.mk
+#@@ -15,10 +15,13 @@ $(eval $(call gb_Executable_add_exception_objects,unoidl-read, \
+#
+# $(eval $(call gb_Executable_use_libraries,unoidl-read, \
+# unoidl \
+#- $(if $(filter TRUE,$(DISABLE_DYNLOADING)),reg) \
+#- $(if $(filter TRUE,$(DISABLE_DYNLOADING)),store) \
+#- salhelper \
+#- sal \
+#+))
+#+
+#+$(eval $(call gb_Executable_add_ldflags,unoidl-read, \
+#+ $(if $(filter TRUE,$(DISABLE_DYNLOADING)),-L/usr/lib/libreoffice/program/ -lreglo) \
+#+ $(if $(filter TRUE,$(DISABLE_DYNLOADING)),-L/usr/lib/libreoffice/program/ -lstorelo) \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_sal \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_salhelpergcc3 \
+# ))
+#
+# # vim: set noet sw=4 ts=4:
+#diff --git a/unoidl/Executable_unoidl-write.mk b/unoidl/Executable_unoidl-write.mk
+#index 9accb31ac14d..f69d78a09c32 100644
+#--- a/unoidl/Executable_unoidl-write.mk
+#+++ b/unoidl/Executable_unoidl-write.mk
+#@@ -15,10 +15,15 @@ $(eval $(call gb_Executable_add_exception_objects,unoidl-write, \
+#
+# $(eval $(call gb_Executable_use_libraries,unoidl-write, \
+# unoidl \
+#- $(if $(filter TRUE,$(DISABLE_DYNLOADING)),reg) \
+#- $(if $(filter TRUE,$(DISABLE_DYNLOADING)),store) \
+#- salhelper \
+#- sal \
+# ))
+#
+#+$(eval $(call gb_Executable_add_ldflags,unoidl-write, \
+#+ $(if $(filter TRUE,$(DISABLE_DYNLOADING)),-L/usr/lib/libreoffice/program/ -lreglo) \
+#+ $(if $(filter TRUE,$(DISABLE_DYNLOADING)),-L/usr/lib/libreoffice/program/ -lstorelo) \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_sal \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_salhelpergcc3 \
+#+))
+#+
+#+
+#+
+# # vim: set noet sw=4 ts=4:
+#diff --git a/unoidl/Library_unoidl.mk b/unoidl/Library_unoidl.mk
+#index c98fc69f4945..bdc8285fe234 100644
+#--- a/unoidl/Library_unoidl.mk
+#+++ b/unoidl/Library_unoidl.mk
+#@@ -32,10 +32,10 @@ $(eval $(call gb_Library_set_include,unoidl, \
+# -I$(SRCDIR)/unoidl/source \
+# ))
+#
+#-$(eval $(call gb_Library_use_libraries,unoidl, \
+#- reg \
+#- sal \
+#- salhelper \
+#+$(eval $(call gb_Library_add_libs,unoidl, \
+#+ -L/usr/lib/libreoffice/program/ -lreglo \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_sal \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_salhelpergcc3 \
+# ))
+#
+# # vim: set noet sw=4 ts=4:
--- /dev/null
+diff --git a/solenv/gbuild/UITest.mk b/solenv/gbuild/UITest.mk
+index cebb030a12cd..88ec5499dcbd 100644
+--- a/solenv/gbuild/UITest.mk
++++ b/solenv/gbuild/UITest.mk
+@@ -34,7 +34,7 @@ ifneq ($(gb_UITest_DEBUGRUN),)
+ gb_UITest_SOFFICEARG:=connect:pipe,name=$(USER)
+ gb_UITest__interactive := $(true)
+ else
+-gb_UITest_SOFFICEARG:=path:$(INSTROOT)/$(LIBO_BIN_FOLDER)/soffice
++gb_UITest_SOFFICEARG:=$(OOO_TEST_SOFFICE)
+ endif
+
+ gb_UITest_COMMAND := LIBO_LANG=en_US.UTF-8 $(gb_UITest_EXECUTABLE) $(SRCDIR)/uitest/test_main.py
+@@ -65,8 +65,8 @@ else
+ $(DEFS) \
+ SAL_LOG_FILE="$(dir $(call gb_UITest_get_target,$*))/soffice.out.log" \
+ TEST_LIB=$(call gb_Library_get_target,test) \
+- URE_BOOTSTRAP=vnd.sun.star.pathname:$(call gb_Helper_get_rcfile,$(INSTROOT)/$(LIBO_ETC_FOLDER)/fundamental) \
+- PYTHONPATH="$(PYPATH)" \
++ URE_BOOTSTRAP=vnd.sun.star.pathname:/usr/lib/libreoffice/program/fundamentalrc \
++ PYTHONPATH="$(filter-out $I/program,$(PYPATH):/usr/lib/libreoffice/program)" \
+ TestUserDir="$(call gb_Helper_make_url,$(dir $(call gb_UITest_get_target,$*)))" \
+ PYTHONDONTWRITEBYTECODE=0 \
+ $(if $(ENABLE_WERROR),PYTHONWARNINGS=error) \
+@@ -95,7 +95,6 @@ define gb_UITest_UITest
+ $(call gb_UITest_get_target,$(1)) : PYPATH := $(SRCDIR)/uitest$$(gb_CLASSPATHSEP)$(SRCDIR)/unotest/source/python$$(gb_CLASSPATHSEP)$(INSTROOT)/$(LIBO_LIB_PYUNO_FOLDER)$(if $(filter-out $(LIBO_LIB_PYUNO_FOLDER),$(LIBO_LIB_FOLDER)),$(gb_CLASSPATHSEP)$(INSTROOT)/$(LIBO_LIB_FOLDER))
+ $(call gb_UITest_get_target,$(1)) : MODULES :=
+
+-$(eval $(call gb_TestHelpers_use_more_fonts,$(call gb_UITest_get_target,$(1))))
+ $(eval $(call gb_Module_register_target,$(call gb_UITest_get_target,$(1)),$(call gb_UITest_get_clean_target,$(1))))
+ $(call gb_Helper_make_userfriendly_targets,$(1),UITest)
+
+--
+2.20.1
+
+diff --git a/solenv/gbuild/Module.mk b/solenv/gbuild/Module.mk
+index 4073dcfd9bf5..856f5efee988 100644
+--- a/solenv/gbuild/Module.mk
++++ b/solenv/gbuild/Module.mk
+@@ -201,7 +201,7 @@ perfcheck :
+ $(call gb_Output_announce_title,all perftests checked.)
+ $(call gb_Output_announce_bell)
+
+-uicheck : build
++uicheck :
+ $(if $(gb_VERBOSE),$(call gb_Output_announce,loaded modules: $(sort $(gb_Module_ALLMODULES)),$(true),UIT,6))
+ $(call gb_Output_announce_title,all uicheck checked.)
+ $(call gb_Output_announce_bell)
+@@ -372,11 +372,6 @@ define gb_Module_add_uicheck_target
+ $(call gb_Module__read_targetfile,$(1),$(2),uicheck target)
+
+ $(call gb_Module_get_uicheck_target,$(1)) : $$(gb_Module_CURRENTTARGET)
+-$$(gb_Module_CURRENTTARGET) :| \
+- $(call gb_Postprocess_get_target,AllModulesButInstsetNative) \
+- $(call gb_Package_get_target,instsetoo_native_setup) \
+- $(call gb_Package_get_target,instsetoo_native_setup_ure)
+-$(call gb_Module_get_uicheck_target,$(1)) : $$(gb_Module_CURRENTTARGET)
+ $(call gb_Module_get_clean_target,$(1)) : $$(gb_Module_CURRENTCLEANTARGET)
+
+ endef
+@@ -479,7 +474,7 @@ endif
+ subsequentcheck : $$(firstword $$(gb_Module_SUBSEQUENTCHECKTARGETSTACK))
+ stagingcheck : $$(firstword $$(gb_Module_STAGINGCHECKTARGETSTACK))
+ perfcheck : $$(firstword $$(gb_Module_PERFCHECKTARGETSTACK))
+-uicheck : build $$(firstword $$(gb_Module_UICHECKTARGETSTACK))
++uicheck : $$(firstword $$(gb_Module_UICHECKTARGETSTACK))
+ clean : $$(firstword $$(gb_Module_CLEANTARGETSTACK))
+
+ ifneq ($$(words $$(gb_Module_TARGETSTACK)),1)
--- /dev/null
+#!/usr/bin/python3
+
+import sys, os
+sys.path.append('/usr/lib/libreoffice/program')
+os.putenv('URE_BOOTSTRAP', 'vnd.sun.star.pathname:/usr/lib/libreoffice/program/fundamentalrc')
+
+import pyuno
+print(pyuno)
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run junit base tests against an installed version of LibreOffice
+# (c) 2021 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ cd $SRCDIR
+ echo
+ echo "====== Unapplying the patches ======"
+ patch -p1 -R < ./debian/tests/patches/cppunit-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to only build the unittests against an existing installation ======"
+patch -p1 < ./debian/tests/patches/cppunit-standalone.diff
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo
+echo "====== Starting slowcheck with ${CHECK_PARALLELISM} job ======"
+
+# hack, otherwise it fails
+mkdir -p $SRCDIR/instdir/program/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/simpress/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/popupmenu/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/statusbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/toolbar/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/ui/.dir
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/modules/simpress/menubar/.dir
+
+# all modules containing slowcheck
+export PARALLELISM=$CHECK_PARALLELISM
+for i in `grep slowcheck */*.mk | cut -d"/" -f1 | sort | uniq | xargs`; do
+ echo
+ echo "====== Running slowcheck in module $i ======"; \
+ cd $i && \
+ make -rk slowcheck \
+ INSTDIR=/usr/lib/libreoffice \
+ verbose=t; \
+ cd ..;\
+done
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run smoketest against an installed version of LibreOffice
+# (c) 2018 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ TMP=`mktemp -q -p $AUTOPKGTEST_TMP`
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ TMP=`mktemp -q`
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ cd $SRCDIR
+ echo
+ echo "====== Unapplying the patches ======"
+ patch -p1 -R < ./debian/tests/patches/cppunit-standalone.diff
+ patch -p1 -R < ./debian/tests/patches/smoketest-standalone.diff
+ patch -p0 -R < ./debian/tests/patches/smoketest-disable-extension-tests.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to only build the smoketest unittest against an existing installation ======"
+patch -p1 < ./debian/tests/patches/cppunit-standalone.diff
+patch -p1 < ./debian/tests/patches/smoketest-standalone.diff
+patch -p0 < ./debian/tests/patches/smoketest-disable-extension-tests.diff
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting smoketest with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+export PARALLELISM=$CHECK_PARALLELISM
+
+export LD_LIBRARY_PATH=/usr/lib/libreoffice/program:$LD_LIBRARY_PATH
+cd smoketest && make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ CppunitTest_smoketest INSTDIR=/usr/lib/libreoffice verbose=t
+
+cd $SRCDIR
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Install a test extension (as smoketest would do)
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ TMP=`mktemp -q -p $AUTOPKGTEST_TMP`
+else
+ TMP=`mktemp -q`
+fi
+
+# skip if building as root:
+# unopkg errors out with "ERROR: Cannot run unopkg as root without --shared or --bundled option."
+# if ran as root
+if [ `id -u` = "0" ]; then
+ exit 77
+fi
+
+echo
+echo "====== Add the extension ======"
+# does it install fine?
+unopkg add -v /usr/share/libreoffice/TestExtension.oxt
+
+echo
+echo "====== Show extension status ======"
+# does it list? For whatever reason unopkg leaves a stale .lock behind when
+# doing this grep directly on the output so do it on a tmpfile
+unopkg list | tee $TMP
+grep -q org.libreoffice.smoketest.TestExtension $TMP || exit 1
+rm $TMP
+
+echo
+echo "====== Remove the extension ======"
+# does it remove?
+unopkg remove -v org.libreoffice.smoketest.TestExtension
+
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Install a test extension shared
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ TMP=`mktemp -q -p $AUTOPKGTEST_TMP`
+else
+ TMP=`mktemp -q`
+fi
+
+
+echo
+echo "====== Add the extension ======"
+# does it install fine?
+unopkg add --shared -v /usr/share/libreoffice/TestExtension.oxt
+
+echo
+echo "====== Show extension status ======"
+# does it list? For whatever reason unopkg leaves a stale .lock behind when
+# doing this grep directly on the output so do it on a tmpfile
+unopkg list --shared | tee $TMP
+grep -q org.libreoffice.smoketest.TestExtension $TMP || exit 1
+rm $TMP
+
+echo
+echo "====== Remove the extension ======"
+# does it remove?
+unopkg remove --shared -v org.libreoffice.smoketest.TestExtension
+
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run UNO tests against an installed version of the URE
+# (c) 2018 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ TMP=`mktemp -q -p $AUTOPKGTEST_TMP`
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ TMP=`mktemp -q`
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ cd $SRCDIR
+ echo
+ echo "====== Unapplying the patches ======"
+ patch -p1 -R < ./debian/tests/patches/testtools-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to only build the testtools unittest against an existing installation ======"
+patch -p1 < ./debian/tests/patches/testtools-standalone.diff
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+if [ ! -f config_host.mk ]; then
+ # this normally shouldn't be needed but otherwise it wants a automatic
+ # re-autogen.
+ echo
+ echo "====== Generating configuration ======="
+ rm -f config_host.mk
+ ./debian/rules config_host.mk ENABLE_PDFIUM=n ENABLE_MERGELIBS=n BUILD_GTK=n BUILD_GTK3=n BUILD_KDE=n
+fi
+
+echo
+echo "====== Starting uno test with ${CHECK_PARALLELISM} job against /usr/lib/libreoffice/program/uno ======"
+
+export PARALLELISM=$CHECK_PARALLELISM
+
+export LD_LIBRARY_PATH=/usr/lib/libreoffice/program:$LD_LIBRARY_PATH
+make testtools.allcheck verbose=t
+
+cd $SRCDIR
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run uicheck against an installed version of LibreOffice
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/uicheck-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to build uicheck against an existing installation ======"
+patch -p1 < ./debian/tests/patches/uicheck-standalone.diff
+
+if [ ! -f config_host.mk ]; then
+ # this normally shouldn't be needed but otherwise it wants a automatic
+ # re-autogen.
+ echo
+ echo "====== Generating configuration ======="
+ rm -f config_host.mk
+ ./debian/rules config_host.mk
+fi
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo
+echo "====== Generating en_US.UTF-8 locale ======"
+cd $WORKDIR
+$SRCDIR/debian/scripts/locale-gen
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting uicheck with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+cd $SRCDIR
+export PARALLELISM=$CHECK_PARALLELISM
+export LOCPATH=$WORKDIR/debian/locales
+export LANG=en_US.UTF-8
+export LC_ALL=en_US.UTF-8
+make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ cui.uicheck verbose=t
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run uicheck against an installed version of LibreOffice
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/uicheck-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to build uicheck against an existing installation ======"
+patch -p1 < ./debian/tests/patches/uicheck-standalone.diff
+
+if [ ! -f config_host.mk ]; then
+ # this normally shouldn't be needed but otherwise it wants a automatic
+ # re-autogen.
+ echo
+ echo "====== Generating configuration ======="
+ rm -f config_host.mk
+ ./debian/rules config_host.mk
+fi
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo
+echo "====== Generating en_US.UTF-8 locale ======"
+cd $WORKDIR
+$SRCDIR/debian/scripts/locale-gen
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting uicheck with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+cd $SRCDIR
+export PARALLELISM=$CHECK_PARALLELISM
+export LOCPATH=$WORKDIR/debian/locales
+export LANG=en_US.UTF-8
+export LC_ALL=en_US.UTF-8
+make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ sc.uicheck verbose=t
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run uicheck against an installed version of LibreOffice
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/uicheck-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to build uicheck against an existing installation ======"
+patch -p1 < ./debian/tests/patches/uicheck-standalone.diff
+
+if [ ! -f config_host.mk ]; then
+ # this normally shouldn't be needed but otherwise it wants a automatic
+ # re-autogen.
+ echo
+ echo "====== Generating configuration ======="
+ rm -f config_host.mk
+ ./debian/rules config_host.mk
+fi
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo
+echo "====== Generating en_US.UTF-8 locale ======"
+cd $WORKDIR
+$SRCDIR/debian/scripts/locale-gen
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting uicheck with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+cd $SRCDIR
+export PARALLELISM=$CHECK_PARALLELISM
+export LOCPATH=$WORKDIR/debian/locales
+export LANG=en_US.UTF-8
+export LC_ALL=en_US.UTF-8
+make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ sd.uicheck verbose=t
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run uicheck against an installed version of LibreOffice
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/uicheck-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to build uicheck against an existing installation ======"
+patch -p1 < ./debian/tests/patches/uicheck-standalone.diff
+
+if [ ! -f config_host.mk ]; then
+ # this normally shouldn't be needed but otherwise it wants a automatic
+ # re-autogen.
+ echo
+ echo "====== Generating configuration ======="
+ rm -f config_host.mk
+ ./debian/rules config_host.mk
+fi
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo
+echo "====== Generating en_US.UTF-8 locale ======"
+cd $WORKDIR
+$SRCDIR/debian/scripts/locale-gen
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting uicheck with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+cd $SRCDIR
+export PARALLELISM=$CHECK_PARALLELISM
+export LOCPATH=$WORKDIR/debian/locales
+export LANG=en_US.UTF-8
+export LC_ALL=en_US.UTF-8
+make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ sfx2.uicheck verbose=t
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run uicheck against an installed version of LibreOffice
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/uicheck-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to build uicheck against an existing installation ======"
+patch -p1 < ./debian/tests/patches/uicheck-standalone.diff
+
+if [ ! -f config_host.mk ]; then
+ # this normally shouldn't be needed but otherwise it wants a automatic
+ # re-autogen.
+ echo
+ echo "====== Generating configuration ======="
+ rm -f config_host.mk
+ ./debian/rules config_host.mk
+fi
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo
+echo "====== Generating en_US.UTF-8 locale ======"
+cd $WORKDIR
+$SRCDIR/debian/scripts/locale-gen
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting uicheck with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+cd $SRCDIR
+export PARALLELISM=$CHECK_PARALLELISM
+export LOCPATH=$WORKDIR/debian/locales
+export LANG=en_US.UTF-8
+export LC_ALL=en_US.UTF-8
+make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ svx.uicheck verbose=t
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run uicheck against an installed version of LibreOffice
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/uicheck-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to build uicheck against an existing installation ======"
+patch -p1 < ./debian/tests/patches/uicheck-standalone.diff
+
+if [ ! -f config_host.mk ]; then
+ # this normally shouldn't be needed but otherwise it wants a automatic
+ # re-autogen.
+ echo
+ echo "====== Generating configuration ======="
+ rm -f config_host.mk
+ ./debian/rules config_host.mk
+fi
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo
+echo "====== Generating en_US.UTF-8 locale ======"
+cd $WORKDIR
+$SRCDIR/debian/scripts/locale-gen
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting uicheck with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+cd $SRCDIR
+export PARALLELISM=$CHECK_PARALLELISM
+export LOCPATH=$WORKDIR/debian/locales
+export LANG=en_US.UTF-8
+export LC_ALL=en_US.UTF-8
+make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ sw.uicheck verbose=t
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run uicheck against an installed version of LibreOffice
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/uicheck-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to build uicheck against an existing installation ======"
+patch -p1 < ./debian/tests/patches/uicheck-standalone.diff
+
+if [ ! -f config_host.mk ]; then
+ # this normally shouldn't be needed but otherwise it wants a automatic
+ # re-autogen.
+ echo
+ echo "====== Generating configuration ======="
+ rm -f config_host.mk
+ ./debian/rules config_host.mk
+fi
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo
+echo "====== Generating en_US.UTF-8 locale ======"
+cd $WORKDIR
+$SRCDIR/debian/scripts/locale-gen
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting uicheck with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+cd $SRCDIR
+export PARALLELISM=$CHECK_PARALLELISM
+export LOCPATH=$WORKDIR/debian/locales
+export LANG=en_US.UTF-8
+export LC_ALL=en_US.UTF-8
+make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ uitest.uicheck verbose=t
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run uicheck against an installed version of LibreOffice
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/uicheck-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to build uicheck against an existing installation ======"
+patch -p1 < ./debian/tests/patches/uicheck-standalone.diff
+
+if [ ! -f config_host.mk ]; then
+ # this normally shouldn't be needed but otherwise it wants a automatic
+ # re-autogen.
+ echo
+ echo "====== Generating configuration ======="
+ rm -f config_host.mk
+ ./debian/rules config_host.mk
+fi
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo
+echo "====== Generating en_US.UTF-8 locale ======"
+cd $WORKDIR
+$SRCDIR/debian/scripts/locale-gen
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting uicheck with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+cd $SRCDIR
+export PARALLELISM=$CHECK_PARALLELISM
+export LOCPATH=$WORKDIR/debian/locales
+export LANG=en_US.UTF-8
+export LC_ALL=en_US.UTF-8
+make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ writerperfect.uicheck verbose=t
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run junit base tests against an installed version of LibreOffice
+# (c) 2021 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ cd $SRCDIR
+ echo
+ echo "====== Unapplying the patches ======"
+ patch -p1 -R < ./debian/tests/patches/cppunit-standalone.diff
+}
+
+trap "unapply" ERR
+
+# skip if building as root:
+# fails with permission errors (seems to assume it runs as user)
+if [ `id -u` = "0" ]; then
+ exit 77
+fi
+
+echo
+echo "====== Patching the tree to only build the unittests against an existing installation ======"
+patch -p1 < ./debian/tests/patches/cppunit-standalone.diff
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo
+echo "====== Starting unitcheck with ${CHECK_PARALLELISM} job ======"
+
+# hack, otherwise it fails
+mkdir -p $SRCDIR/instdir/program/.dir
+mkdir -p $SRCDIR/instdir/share/registry/.dir
+mkdir -p $SRCDIR/instdir/share/registry/res/.dir
+
+mkdir -p $SRCDIR/instdir/share/filter/.dir
+
+mkdir -p $SRCDIR/instdir/share/config/soffice.cfg/vcl/ui/.dir
+
+# all modules containing unitcheck
+export PARALLELISM=$CHECK_PARALLELISM
+# helpcontent2
+# idlc - tries to *write* /usr/lib/libreoffice/sdk/bin/idlc...
+# unoidl - tries to *write* /usr/lib/libreoffice/sdk/bin/unoidl-check (and more?)...
+# odk - tries to *write* to the SDK dirs and we do test _using_ the ODK
+# in odk-build-examples anyway
+# testtools - already tested in the "uno" test
+for i in `grep check */*.mk | grep -v helpcontent2 | grep -E -v '(idlc|unoidl)' | grep -v odk | grep -v testtools | cut -d"/" -f1 | sort | uniq | xargs`; do
+ echo
+ echo "====== Running unitcheck in module $i ======"; \
+ cd $i && \
+ make -rk unitcheck \
+ INSTDIR=/usr/lib/libreoffice \
+ verbose=t; \
+ cd ..;\
+done
+
+unapply
+
--- /dev/null
+#!/usr/bin/python3
+
+import uno
+print(uno)
--- /dev/null
+Bug-Database: https://bugs.documentfoundation.org/
+Bug-Submit: https://bugs.documentfoundation.org/enter_bug.cgi
+Donation: https://www.libreoffice.org/donate/
+FAQ: https://www.libreoffice.org/get-help/frequently-asked-questions/
+Repository: git://anongit.freedesktop.org/libreoffice/core
+Repository-Browse: https://cgit.freedesktop.org/libreoffice/core
+Security-Contact: officesecurity@lists.freedesktop.org
--- /dev/null
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1.4.12 (GNU/Linux)
+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+=CCIg
+-----END PGP PUBLIC KEY BLOCK-----
--- /dev/null
+#!/bin/sh
+
+echo "" >&3
+echo "Java (javaldx):" >&3
+/usr/lib/libreoffice/program/javaldx >&3
+
+echo "" >&3
+echo "Java:" >&3
+#_lo_profile_ver=`echo @OOVER@ | cut -d. -f1`
+_lo_profile_ver=4
+RTL_OS=@RTL_OS@
+RTL_ARCH=@RTL_ARCH@
+if [ -d "$HOME/.config/libreoffice/$_lo_profile_ver" ]; then
+ grep -ri java $HOME/.config/libreoffice/$_lo_profile_ver/user/config/javasettings_${RTL_OS}_${RTL_ARCH}.xml >&3
+fi
+
--- /dev/null
+ure-java: classpath-contains-relative-path ../ [usr/share/java/java_uno.jar]
--- /dev/null
+PLATFORMID=linux_alpha
+RTL_ARCH=ALPHA
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_x86_64
+RTL_ARCH=X86_64
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_arm_oabi
+RTL_ARCH=ARM_OABI
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_aarch64
+RTL_ARCH=AARCH64
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_arm_eabi
+RTL_ARCH=ARM_EABI
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_arm_eabi
+RTL_ARCH=ARM_EABI
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_hppa
+RTL_ARCH=HPPA
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_x86
+RTL_ARCH=x86
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_ia64
+RTL_ARCH=IA64
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=kfreebsd_x86_64
+RTL_ARCH=X86_64
+RTL_OS=FreeBSD
--- /dev/null
+PLATFORMID=kfreebsd_x86
+RTL_ARCH=x86
+RTL_OS=FreeBSD
--- /dev/null
+PLATFORMID=linux_m68k
+RTL_ARCH=M68K
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_mips_eb
+RTL_ARCH=MIPS_EB
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_mips64_eb
+RTL_ARCH=MIPS64_EB
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_mips64_el
+RTL_ARCH=MIPS64_EL
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_mips_el
+RTL_ARCH=MIPS_EL
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_powerpc
+RTL_ARCH=PowerPC
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_powerpc
+RTL_ARCH=PowerPC
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_powerpc64
+RTL_ARCH=PowerPC_64
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_powerpc64_le
+RTL_ARCH=PowerPC_64_LE
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_s390
+RTL_ARCH=S390
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_s390x
+RTL_ARCH=S390x
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=solaris_x86
+RTL_ARCH=x86
+RTL_OS=Solaris
--- /dev/null
+PLATFORMID=linux_sparc
+RTL_ARCH=SPARC
+RTL_OS=Linux
--- /dev/null
+PLATFORMID=linux_sparc64
+RTL_ARCH=SPARC64
+RTL_OS=Linux
--- /dev/null
+version=4
+
+# only releases (and the final rc before the release. The last rc simply get renamed
+# so e.g. 6.4.3 final is 6.4.3 rc2 which is 6.4.3.2)
+# FIXME:
+# Unfortunately it seems that download.documentfoundation.org/libreoffice/src gets the rcs too. But
+# download.documentfoundation.org/stable((\d.\d.\d) doesn't work since we then get no tarball information
+# as that doesn't ship the source... And I fail getting parsing of www.libreoffice.org/download to work
+#opts="compression=xz,pgpsigurlmangle=s/$/.asc/,uversionmangle=s/(\d.\d.\d).(\d)/$1/" \
+# http://download.documentfoundation.org/@PACKAGE@/src/(\d.\d.\d)/@PACKAGE@-(\d.\d.\d).(\d).tar.xz debian
+#
+#opts="pgpsigurlmangle=s/$/.asc/,component=helpcontent2,uversionmangle=s/(\d.\d.\d).(\d)/$1/" \
+# http://download.documentfoundation.org/@PACKAGE@/src/(\d.\d.\d)/@PACKAGE@-help-(\d.\d.\d).(\d).tar.xz same
+#
+#opts="pgpsigurlmangle=s/$/.asc/,component=translations,uversionmangle=s/(\d.\d.\d).(\d)/$1/" \
+# http://download.documentfoundation.org/@PACKAGE@/src/(\d.\d.\d)/@PACKAGE@-translations-(\d.\d.\d).(\d).tar.xz same
+
+# FIXME: Combine those to one part?
+# Problem: 6.4.3.2 -> 6.4.3~rc2 (rc added manually)
+# 7.0.0.0.alpha1 -> 7.0.0~alpha1 (.0. stripped and following value taken as-is)
+
+# rcs (and the last rc which will become final, see above)
+opts="compression=xz,pgpsigurlmangle=s/$/.asc/,versionmangle=s/(\d.\d.\d).(\d)/$1~rc$2/" \
+ https://dev-builds.libreoffice.org/pre-releases/src/@PACKAGE@-(\d.\d.\d).(\d).tar.xz debian
+
+opts="pgpsigurlmangle=s/$/.asc/,component=helpcontent2,versionmangle=s/(\d.\d.\d).(\d)/$1~rc$2/" \
+ https://dev-builds.libreoffice.org/pre-releases/src/@PACKAGE@-help-(\d.\d.\d).(\d).tar.xz same
+
+opts="pgpsigurlmangle=s/$/.asc/,component=translations,versionmangle=s/(\d.\d.\d).(\d)/$1~rc$2/" \
+ https://dev-builds.libreoffice.org/pre-releases/src/@PACKAGE@-translations-(\d.\d.\d).(\d).tar.xz same
+
+# alpha, beta
+#opts="compression=xz,pgpsigurlmangle=s/$/.asc/,versionmangle=s/(\d.\d.\d).(alpha|beta).(\d)/$1~$2$3/" \
+# https://dev-builds.libreoffice.org/pre-releases/src/@PACKAGE@-(\d.\d.\d).0.(alpha|beta)(\d).tar.xz debian
+#
+#opts="pgpsigurlmangle=s/$/.asc/,versionmangle=s/(\d.\d.\d).(alpha|beta).(\d)/$1~$2$3/" \
+# https://dev-builds.libreoffice.org/pre-releases/src/@PACKAGE@-help-(\d.\d.\d).0.(alpha|beta)(\d).tar.xz same
+#
+#opts="pgpsigurlmangle=s/$/.asc/,versionmangle=s/(\d.\d.\d).(alpha|beta).(\d)/$1~$2$3/" \
+# https://dev-builds.libreoffice.org/pre-releases/src/@PACKAGE@-translations-(\d.\d.\d).0.(alpha|beta)(\d).tar.xz same
--- /dev/null
+Document: xmerge-javadoc
+Title: LibreOffice XMerge API Javadoc
+Author: Oracle
+Section: Apps/Programming
+
+Format: HTML
+Index: /usr/share/doc/libreoffice-dev/docs/xmerge/index.html
projects / libreoffice.git / commitdiff