--- /dev/null
--- /dev/null
++freecad (0.18~pre1+dfsg1-5) unstable; urgency=medium
++
++ * [e91ae47] Fix update-alternatives problem (Closes: #923465 #923412)
++ * [a7f46c7] Update OpenCASCADE path
++ * [958e27f] Add patch to fix Start WB
++ * [ba149a5] Add lintian override for freecad virtual package
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 02 Mar 2019 03:42:57 -0600
++
++freecad (0.18~pre1+dfsg1-4) unstable; urgency=medium
++
++ * [7865394] Use libqt5opengl5-dev instead of -desktop-dev for armel/armhf
++ builds
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Fri, 15 Feb 2019 14:15:18 -0600
++
++freecad (0.18~pre1+dfsg1-3) unstable; urgency=medium
++
++ * [f852948] Re-add allow-stderr restriction on autopkgtest
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Mon, 11 Feb 2019 13:59:14 -0600
++
++freecad (0.18~pre1+dfsg1-2) unstable; urgency=medium
++
++ * [4f80ffc] Undo accidental autopkgtest reversion
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sun, 10 Feb 2019 16:48:53 -0600
++
++freecad (0.18~pre1+dfsg1-1) unstable; urgency=medium
++
++ * [e648c8e] Add Breaks+Conflicts+Replaces to smooth upgrade
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 09 Feb 2019 17:56:53 -0600
++
++freecad (0.18~pre1+dfsg1-1~exp1) experimental; urgency=medium
++
++ * [f52bb1e] Update packaging for 0.18
++ * [0b830f4] New upstream version 0.18~pre1+dfsg1
++ * [9b83d5c] Update lintian overrides for 0.18
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sun, 27 Jan 2019 19:42:09 -0600
++
++freecad (0.17+dfsg1-8) unstable; urgency=medium
++
++ * [9d6a8a1] Add allow-stderr restriction on autopkgtest (Closes: #920525)
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 26 Jan 2019 18:04:22 -0600
++
++freecad (0.17+dfsg1-7) unstable; urgency=medium
++
++ * [86c1410] Fix autopkgtest command (Closes: #918479)
++ * [d5ee7ff] Update VTK dep to v7
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Fri, 25 Jan 2019 20:33:35 -0600
++
++freecad (0.17+dfsg1-6) unstable; urgency=medium
++
++ * [af5bdfa] Update coin/pivy deps for Coin transition
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Fri, 21 Dec 2018 08:11:47 -0600
++
++freecad (0.17+dfsg1-5) unstable; urgency=medium
++
++ * Upload to unstable
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Thu, 11 Oct 2018 08:14:49 -0500
++
++freecad (0.17+dfsg1-4) experimental; urgency=medium
++
++ * [07492c4] Update dependency to use libqt5opengl5-desktop-dev & exclude
++ armel/armhf
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Thu, 11 Oct 2018 00:37:53 -0500
++
++freecad (0.17+dfsg1-3) experimental; urgency=medium
++
++ * [44d99e3] Remove fail-missing to handle arch-specific builds
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Wed, 10 Oct 2018 02:38:11 -0500
++
++freecad (0.17+dfsg1-2) experimental; urgency=medium
++
++ * [04e05c3] Downgrade VTK dependency back to VTK6
++ * [6f91417] Enable Qt5 builds (Closes: #874877)
++ * [741aae7] Add patch for Qt 5.11 build support
++ * [0939941] Add Breaks+Replaces for FreeCAD < 0.17 (Closes: #906110)
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Mon, 08 Oct 2018 01:32:52 -0500
++
++freecad (0.17+dfsg1-1) experimental; urgency=medium
++
++ * New upstream version 0.17+dfsg1
++ * Update OpenCASCADE dependency to use OCCT instead of OCE
++ * Update VTK dependency to VTK7
++ * Update d/copyright's Files-Excluded section and clean up per lintian
++ warnings
++ * Update Uploaders: add Kurt Kremitzki
++ * Switch default workbench from Start to Part Design due to Qt 4 Webkit
++ deprecation, to be reverted after Qt 5 switch is complete
++ * Removed patches fixed upstream or no longer relevant in 0.17:
++ - fix-836983.patch
++ - fix_FTBFS_on_precise.patch
++ - use_share.patch
++ * Refreshed all other patches including:
++ - remove_webkit.patch: Since this breaks the default Start Workbench,
++ I have updated it to default to Part Design, the new premier WB
++ for this upstream version (i.e. PartDesign Next)
++ * Added lintian override for hardening false positives
++
++ -- Kurt Kremitzki <kkremitzki@gmail.com> Thu, 07 Jun 2018 17:32:47 -0500
++
++freecad (0.16.6712+dfsg1-3) unstable; urgency=medium
++
++ * Team upload
++ * Close Teemu's bug in previous changelog entry
++ * Fix autopkgtest on architectures where char is unsigned by default,
++ thanks Frédéric Bonnard (Closes: #836983)
++ * Install copies of icons since AppStream does not recognize symlinks
++ (Closes: #850965)
++ * Update Uploaders: add Sebastian Kuzminsky
++ remove Adam C. Powell, IV
++
++ -- Graham Inggs <ginggs@debian.org> Mon, 28 May 2018 08:55:04 +0000
++
++freecad (0.16.6712+dfsg1-2) unstable; urgency=medium
++
++ * Team upload.
++
++ [ Teemu Ikonen ]
++ * [a1ddb98] Remove myself from Uploaders. (Closes: #892617)
++
++ [ Anton Gladky ]
++ * [705f952] Update VCS-fields to the salsa-migration
++ * [ddc6548] Set Standards-Version to 4.1.4
++ * [3313fe7] Remove myself from uploaders
++ * [a3ef1ba] Switch to compat-level 11
++ * [6a5a3cb] Remove deprecated Testsuite-field in the d/control
++
++ -- Anton Gladky <gladk@debian.org> Wed, 23 May 2018 22:35:29 +0200
++
++freecad (0.16.6712+dfsg1-1) unstable; urgency=medium
++
++ * [c631550] New upstream version 0.16.6712+dfsg1
++ * [70d3ebc] Refresh patches
++ * [c2f67a5] Remove dependency on Qt4 Webkit. (Closes: #784464)
++ * [31d5630] Set Standards-Version: 4.1.0
++ * [85cc9d9] Change priority to optional
++ * [dc32b52] Set maximal hardening option
++ * [c56abf6] Drop "alpha" from description. (Closes: #868727)
++
++ -- Anton Gladky <gladk@debian.org> Fri, 08 Sep 2017 22:55:20 +0200
++
++freecad (0.16+dfsg2-3) unstable; urgency=medium
++
++ [ Graham Inggs ]
++ * [06c5066] Use PNG and SVG icons instead of XPM (Closes: #850965)
++ * [d40a6a3] Drop debian/menu and do not install XPM icon, see #741573
++ * [d616835] Add Suggests on graphviz and povray (Closes: #849644)
++ * [e25f6a6] Switch to debhelper 10
++ * [f02e70f] Add debian/clean to fix FTBFSx2
++
++ [ Anton Gladky ]
++ * [245dccf] Fix d/copyright.
++ * [3f389af] Apply cme fix dpkg.
++
++ -- Anton Gladky <gladk@debian.org> Fri, 20 Jan 2017 20:05:18 +0100
++
++freecad (0.16+dfsg2-2) unstable; urgency=medium
++
++ * Team upload.
++ [ Anton Gladky ]
++ * Remove freecad-doc from suggests. (Closes: #827734)
++
++ [ Nobuhiro Iwamatsu ]
++ * Fix FTBFS with opencv 3.1. (Closes: #841416)
++
++ -- Anton Gladky <gladk@debian.org> Wed, 23 Nov 2016 05:20:31 +0900
++
++freecad (0.16+dfsg2-1) unstable; urgency=medium
++
++ * [4f08de5] Remove data/examples. (Closes: #745237)
++ * [7434cc4] Imported Upstream version 0.16+dfsg2
++
++ -- Anton Gladky <gladk@debian.org> Sun, 15 May 2016 12:29:42 +0200
++
++freecad (0.16+dfsg1-1) unstable; urgency=medium
++
++ * [9e69a23] Update d/watch.
++ * [bf22c89] Drop copying of Version.h explicitly.
++ * [010b5c8] Refresh/Remove patches.
++ * [24a4f7d] Update d/copyright.
++ * [0547be9] Apply cme fix dpkg-control.
++ * [fc9b859] Update d/copyright.
++ * [6e5df4d] Imported Upstream version 0.16+dfsg1. (Closes: #823816)
++ * [06ed39b] Remove freecad-dev and freecad-doc binaries.
++ * [94c3ac2] Update d/copyright. (Closes: #726805 #745237)
++
++ -- Anton Gladky <gladk@debian.org> Thu, 12 May 2016 20:48:30 +0200
++
++freecad (0.15.4671+dfsg1-4) unstable; urgency=medium
++
++ * [a934100] Add strict dependency on oce>=0.17.1. (Closes: #802517)
++
++ -- Anton Gladky <gladk@debian.org> Fri, 29 Jan 2016 13:10:48 +0100
++
++freecad (0.15.4671+dfsg1-3) unstable; urgency=medium
++
++ [ Abdullah Tahiri ]
++ * [f4d259b] Fix Sketcher: Solver: FullPivLU::compute for Eigen-3.3.
++ (Closes: #811239)
++
++ -- Anton Gladky <gladk@debian.org> Sun, 17 Jan 2016 13:44:36 +0100
++
++freecad (0.15.4671+dfsg1-2) unstable; urgency=medium
++
++ * [0c78ef5] Remove EIGEN2_SUPPORT. (Closes: #786356)
++
++ -- Anton Gladky <gladk@debian.org> Sun, 25 Oct 2015 18:51:47 +0100
++
++freecad (0.15.4671+dfsg1-1) unstable; urgency=medium
++
++ * [4b6e554] Update d/copyright.
++ * [dd370f0] Update d/watch.
++ * [a70bba6] Imported Upstream version 0.15.4671+dfsg1. (Closes: #789105)
++ * [80ccaac] Refresh patches.
++ * [c868df9] Add pyside-tools as dependency.
++ * [ab8015b] Drop the load of news-page. (Closes: #787948)
++
++ -- Anton Gladky <gladk@debian.org> Thu, 27 Aug 2015 22:54:47 +0200
++
++freecad (0.14.3702+dfsg-4) unstable; urgency=medium
++
++ [ Anton Gladky ]
++ * [7dbbdb6] Set Standards-Version: 3.9.6. No changes.
++ * [99c5e82] Apply cme fix dpkg-control.
++
++ [ Martin Pitt ]
++ * [91ef5e9] Work around Qt4 not being compatible with boost+gcc5.
++ (Closes: #795069)
++
++ -- Anton Gladky <gladk@debian.org> Wed, 12 Aug 2015 20:34:02 +0200
++
++freecad (0.14.3702+dfsg-3) unstable; urgency=medium
++
++ [ Yorik van Havre ]
++ * [9ddbf15] Disable automatic DXF library download. (Closes: #764814)
++
++ -- Anton Gladky <gladk@debian.org> Fri, 24 Oct 2014 18:59:03 +0200
++
++freecad (0.14.3702+dfsg-2) unstable; urgency=medium
++
++ [ Anton Gladky ]
++ * [aafcc31] Remove libswscale-dev from BD. (Closes: #757282)
++ * [81d4b6e] Fix installing of som Mods. (Closes: #736273)
++ * [1a4492e] Remove deprecated lines from d/copyright. (Closes: #745237)
++
++ [ Alexander ]
++ * [efc7d53] Fix compilation with clang. (Closes: #755305)
++
++ -- Anton Gladky <gladk@debian.org> Sun, 24 Aug 2014 08:12:43 +0200
++
++freecad (0.14.3702+dfsg-1) unstable; urgency=medium
++
++ * [7fc727b] Imported Upstream version 0.14.3702
++ * [3edf0de] Refresh patches.
++ * [077b63a] Redirect unittest output into stdout. Fixes autopkgtests.
++
++ -- Anton Gladky <gladk@debian.org> Tue, 22 Jul 2014 20:15:18 +0200
++
++freecad (0.13.3637-dfsg-1) unstable; urgency=medium
++
++ * [ddeee1c] Imported Upstream version 0.13.3637-dfsg
++ * [0fe87be] Update/remove patches.
++ * [60ad7cc] Update install files, dependencies.
++ * [9f9cca3] Add autopkgtest.
++
++ -- Anton Gladky <gladk@debian.org> Sun, 25 May 2014 19:05:13 +0200
++
++freecad (0.13.2935-dfsg-1.1) unstable; urgency=low
++
++ * Non-maintainer upload.
++ * Update xerces build dependency to libxerces-c-dev. (Closes: #733072)
++
++ -- Jay Berkenbilt <qjb@debian.org> Wed, 15 Jan 2014 12:19:37 -0500
++
++freecad (0.13.2935-dfsg-1) unstable; urgency=medium
++
++ * [824153f] Move python-collada and python-ply from Recommends to Depends.
++ * [3047a6b] Imported Upstream version 0.13.2935-dfsg
++ * [36a4082] Bump Standards-Version: 3.9.5. No changes.
++
++ -- Anton Gladky <gladk@debian.org> Wed, 01 Jan 2014 20:29:15 +0100
++
++freecad (0.13.2800-dfsg-1) unstable; urgency=low
++
++ * [e051565] Imported Upstream version 0.13.2800-dfsg. (Closes: #730952)
++ * [a2f0187] Update debian/copyright. (Closes: #726805)
++
++ -- Anton Gladky <gladk@debian.org> Mon, 02 Dec 2013 22:11:10 +0100
++
++freecad (0.13.2580-dfsg-2) unstable; urgency=low
++
++ * [2aab6f0] Update and re-enable disable_memory_check.patch.
++ * [4d36847] Use wrap-and-sort.
++
++ -- Anton Gladky <gladk@debian.org> Mon, 30 Sep 2013 18:49:23 +0200
++
++freecad (0.13.2580-dfsg-1) unstable; urgency=low
++
++ [ Anton Gladky ]
++ * [1190215] Update get_git_orig_src.sh.
++ * [077e969] Build against BSD-version of soqt. (Closes: #617613)
++ * [37d60d0] Update patches, remove some of them.
++ * [b4801bc] Simplify debian/rules.
++ * [40ddd86] Imported Upstream version 0.13.2580-dfsg
++ * [61e7426] Minor fix in installation files.
++ * [fcaeb91] Fix syntax error in importOCA.py.
++ * [429db74] Ignore quilt dir
++ * [ffccc7d] Unapply patches after build
++
++ [ Sebastian Hoogen ]
++ * [aa8ab82] Use packaged version of python-ply.
++
++ -- Anton Gladky <gladk@debian.org> Fri, 27 Sep 2013 19:56:46 +0200
++
++freecad (0.13.1830-dfsg-3) unstable; urgency=low
++
++ [ Simon Ruderich ]
++ * [71fd1c2] Hardening CPPFLAGS and LDFLAGS. (Closes: #711243)
++
++ [ Peter Michael Green ]
++ * [36d7879] Fix build failures with new oce by forcing occ include directory.
++ (Closes: 718545, 717034)
++ * [7fa3e69] Remove some stuff left behind by build process in clean target
++ to prevent errors from dpkg-source when building multiple times
++ in a row.
++ - obj-*
++ - src/Mod/Start/Gui/share
++ - src/Mod/Drawing/App/share
++
++ [ Anton Gladky ]
++ * [5906d0e] Update debian-copyright-file.
++ * [07d04d1] Move python-collada from Depends to Recommends-section.
++ * [cf6cb9f] Add python-collada to Depends.
++ * [36b4bc0] Add versioned dependency on libsoqt4-20. (Closes: #711812)
++ * [32738be] Use canonical VCS.
++
++ -- Anton Gladky <gladk@debian.org> Wed, 07 Aug 2013 23:43:36 +0200
++
++freecad (0.13.1830-dfsg-2) unstable; urgency=low
++
++ * [800a2d9] Compile freecad against libcoin80. (Closes: #617613)
++ * [abee4e5] Compile against fltk1.3 instead of fltk1.1
++ * [23916ae] Raise the minimal version of soqt4-dev due to coin80.
++ * [87207ba] Update homepage.
++ * [224f12d] Add versioned dependency on python-pivy.
++
++ -- Anton Gladky <gladk@debian.org> Thu, 30 May 2013 19:48:30 +0200
++
++freecad (0.13.1830-dfsg-1) unstable; urgency=low
++
++ [ Boris Pek ]
++ * [fbdfc08] Update debian/rules: use src/Build/Version.h provided by upstream.
++ (Closes: #706578)
++ * [eb29048] Update scripts/get_git_orig_src.sh: - change version format.
++
++ -- Anton Gladky <gladk@debian.org> Thu, 02 May 2013 23:05:20 +0200
++
++freecad (0.13.1830-dfsg-1~exp1) experimental; urgency=low
++
++ * [0175d6f] Add python-matplotlib to depends-section.
++ * [eb9bc9a] Imported Upstream version 0.13.1830-dfsg
++ * [e2ec220] Use Standards-Version: 3.9.4. No changes.
++ * [25815b6] Remove obsolete DM-Upload-Allowed flag.
++ * [24f4cd0] Update dates in copyright-file.
++
++ -- Anton Gladky <gladk@debian.org> Mon, 04 Feb 2013 22:11:12 +0100
++
++freecad (0.13~20130106.gitafb3355-exp1) experimental; urgency=low
++
++ * [0efcf90] Imported Upstream version 0.13~20130106.gitafb3355
++ * [a5ddc03] Install missing usr/share. (Closes: #697573)
++
++ -- Anton Gladky <gladky.anton@gmail.com> Thu, 10 Jan 2013 18:45:11 +0100
++
++freecad (0.13~20121120.git5082ae2-2~exp2) experimental; urgency=low
++
++ * [bcc4f2e] Enable dir_as_string.patch.
++ * [41e4a4e] Fix python-warning during install.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Fri, 23 Nov 2012 22:11:25 +0100
++
++freecad (0.13~20121120.git5082ae2-1) experimental; urgency=low
++
++ [ Sandro Knauß ]
++ * [3d64502] Adding libode-dev, libspnav-dev to Builddeps.
++ Remove all autotool Builddeps.
++ * [c432199] use more debianize directories in debian/rules.
++ * [0a1599d] Add debian/patches/dir_as_string.patch.
++ * [217ec7c] Add debian/patches/use_install_rpath.patch.
++ * [36766ed] Add debian/patches/use_share.pach.
++
++ [ Anton Gladky ]
++ * [96fc2ed] Use cmake for git-version of freecad.
++ * [581b23b] Prepare for 0.13rc
++ * [d9b01ef] Fix compilation.
++ * [197b945] Add script for getting freecad from git-repo.
++ * [ebae551] Imported Upstream version 0.13~20121120.git5082ae2
++
++ -- Anton Gladky <gladky.anton@gmail.com> Tue, 20 Nov 2012 19:22:23 +0100
++
++freecad (0.12.5284-dfsg-7) unstable; urgency=low
++
++ * [b420ea0] Add -fpermissive to cpp, c-flags to fix FTBFS with gcc-4.7.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Mon, 14 May 2012 19:32:10 +0200
++
++freecad (0.12.5284-dfsg-6) unstable; urgency=low
++
++ * [d31cbf4] Disable python-pivy depends on powerpc.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Thu, 12 Apr 2012 21:05:36 +0200
++
++freecad (0.12.5284-dfsg-5) unstable; urgency=low
++
++ * [4d3e1c0] Do not build freecad parallel, it causes FTBFS sometimes ( -j5).
++ * [d749637] Fix FTBFS during compiling against oce-0.9.1.
++ Thanks to Denis Barbier. (Closes: #664207)
++ * [28cb8ba] Fix bug of identifying SWIG version.
++ Thanks to Werner Mayer <werner.wm.mayer@gmx.de>.
++ (Closes: #646374)
++ * [fde200f] Use Standards-Version 3.9.3. No changes.
++ * [595a19e] Minor update of copyright file due to released DEP-5.
++ * [65ef554] Enable HAVE_SWIG option.
++ * [1af4c8a] Fix crash in Help->About menu. (Closes: #663704)
++
++ -- Anton Gladky <gladky.anton@gmail.com> Sun, 18 Mar 2012 08:51:19 +0100
++
++freecad (0.12.5284-dfsg-4) unstable; urgency=low
++
++ * [84c5407] Add needed #include. Fix compilation on Ubuntu Precise.
++ * [7b3d15a] Move python-pivy from recommends to depends section.
++ (Closes: #646374)
++ * [9136519] Update homepage section.
++ * [da53f03] Raise dh-compat to version 8.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Fri, 17 Feb 2012 19:59:20 +0100
++
++freecad (0.12.5284-dfsg-3) unstable; urgency=low
++
++ * [da3974a] Switch from opencascade to oce. (Closes: #659133)
++
++ -- Anton Gladky <gladky.anton@gmail.com> Thu, 09 Feb 2012 20:55:05 +0100
++
++freecad (0.12.5284-dfsg-2) unstable; urgency=low
++
++ * [125b5f6] Add libeigen3-dev to "depends" in freecad-dev.
++ * Rebuild due to opencv-transition.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Sun, 22 Jan 2012 20:07:21 +0100
++
++freecad (0.12.5284-dfsg-1) unstable; urgency=low
++
++ * [99b66f2] Imported Upstream version 0.12.5284-dfsg
++ * [dc52b9c] Remove patch (gcc-4.6 compilation), hopefully applied by upstream.
++ * [f66ef5d] Remove patch (typo).
++ * [ce862a0] Update copyright file (add data-files).
++ * [91d5731] Use eigen3 instead of eigen2.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Mon, 09 Jan 2012 21:29:18 +0100
++
++freecad (0.11.4446-dfsg-4) unstable; urgency=low
++
++ * [d3ec609] Make a line in changelog shorter. Fix lintian-warning.
++ * [df77453] Fix (hopefully) FTBFS on Armel. Thanks to Paul Brook.
++ (Closes: #623559)
++
++ -- Anton Gladky <gladky.anton@gmail.com> Fri, 28 Oct 2011 20:25:21 +0200
++
++freecad (0.11.4446-dfsg-3) unstable; urgency=low
++
++ * [12d6b55] Add -lrt key in LDFLAGS to configure properly opencascade on
++ kfreebsd.
++ * [bbd8acc] Remove .la files from -dev binary.
++ * [8932ee7] Disable memory check in SMDS. (Closes: #623560).
++
++ -- Anton Gladky <gladky.anton@gmail.com> Sat, 24 Sep 2011 16:35:30 +0200
++
++freecad (0.11.4446-dfsg-2) unstable; urgency=low
++
++ * [93347cc] Switch off SWIG to fix FTBFS. (Closes: #632348)
++
++ -- Anton Gladky <gladky.anton@gmail.com> Tue, 05 Jul 2011 22:41:21 +0200
++
++freecad (0.11.4446-dfsg-1) unstable; urgency=low
++
++ [ Teemu Ikonen ]
++ * [58f7907] Copyright: Update.
++
++ [ Anton Gladky ]
++ * [f5d9322] Imported Upstream version 0.11.4446-dfsg. (Closes: #576653).
++ * [aeacc72] Add DM-Upload-Allowed field.
++ * [b08f851] Add changes to debian/rules as suggested by Werner Mayer.
++ * [c82751a] Delete old patches.
++ * [e71109f] Add libopencascade-ocaf-dev to BD.
++ * [9746063] Import patch to fix compilation error with GCC-4.6.
++ * [175e959] Update watch file.
++ * [7989aa6] Update debian/rules to dh 7, thanks to Bernhard R. Link.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Thu, 09 Jun 2011 21:27:03 +0200
++
++freecad (0.11.3729.dfsg-2) unstable; urgency=low
++
++ * Add gfortran and libopencascade-visualization-dev to BD
++ to fix FTBFS (closes: #622694)
++ * Add libqtwebkit-dev to BD (closes: #618241)
++ * Delete quilt from BD and corresponding changes in rules.
++ * Add description to freecad-occ650.patch
++ * Delete encoding string from .desktop
++ * Fix some spelling errors, pointed out by lintian.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Thu, 14 Apr 2011 10:23:25 +0100
++
++freecad (0.11.3729.dfsg-1) unstable; urgency=low
++
++ [ Denis Barbier ]
++ * Merge OpenCASCADE 6.5.0 compatibility patch (closes: #617545).
++
++ [ Adam C. Powell, IV ]
++ * New upstream (closes: #622213, #618241).
++ * Changed to source format 3.0 (quilt).
++ * Added patch target which forces autotools to run, and automake and autoconf
++ are now in Build-Depends (closes: #607181).
++ * Set aside src/Build/Version.h to prevent build problems.
++ * Does not install .la files (closes: #621298).
++ * Boost 1.46 compatibility patch (closes: #621877).
++ * Set aside files which autotools modifies so clean works.
++ * Added libtool to Build-Depends (thanks: PICCA Frédéric-Emmanuel).
++ * Bumped Standards-Version, no changes needed.
++
++ -- "Adam C. Powell, IV" <hazelsct@debian.org> Tue, 12 Apr 2011 23:40:30 -0400
++
++freecad (0.10.3247.dfsg-2) unstable; urgency=low
++
++ * control:
++ - Update to standars-version 3.9.0.
++ - Remove libblas-dev, libatlas-dev from build-deps.
++ * Add debian/shlibs.local file containing the the correct binary dep
++ to libsoqt4-20 (closes: #575239).
++ * copyright: Add a verbatim copy of Tiddlywiki BSD license. Fixes
++ the lintian warning copyright-refers-to-deprecated-bsd-license-file.
++ * Add kFreeBSD portability fixes. Thanks to Petr Salinger
++ <Petr.Salinger@seznam.cz> for the patch (closes: #592461).
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Wed, 18 Aug 2010 19:34:36 +0200
++
++freecad (0.10.3247.dfsg-1) unstable; urgency=low
++
++ * New upstream version (closes: #582627)
++ * Add debian/source/format file with contents "1.0".
++ * Use freecad.xpm as icon in menu and desktop files.
++ * copyright: Add licensing information for new files in this release.
++ * src/Base/Makefile.in, src/Gui/Makefile.in: Do not remove *.tab.c files
++ in make distclean target.
++ * control:
++ - Add build-dep to libeigen2-dev.
++ - Update to standards-version 3.8.4.
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Mon, 05 Jul 2010 15:07:49 +0200
++
++freecad (0.9.2646.5.dfsg-1) unstable; urgency=low
++
++ * Add 'dfsg' extension to upstream version, upstream sources are unchanged.
++ * Remove libgl1-mesa-dev build-dep, rely on libcoin to pull in GL libraries.
++ * Change build-dep libatlas-headers to libatlas-dev (closes: #577309).
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Fri, 14 May 2010 17:20:35 +0200
++
++freecad (0.9.2646.5-1) unstable; urgency=low
++
++ * New upstream version (closes: #561696).
++ * Added swig to Build-Depends (closes: #563523, #563772).
++ * Removed python-opencv from Build-Depends and Recommends (closes: #560768).
++
++ -- Adam C. Powell, IV <hazelsct@debian.org> Mon, 11 Jan 2010 08:48:33 -0500
++
++freecad (0.9.2646.4-1) unstable; urgency=low
++
++ * New upstream version (closes: #559849, #559846).
++
++ -- Adam C. Powell, IV <hazelsct@debian.org> Fri, 11 Dec 2009 20:21:32 -0500
++
++freecad (0.9.2646.3-1) unstable; urgency=low
++
++ * New upstream version. Removes TiddlySaver.jar, fixes help problems.
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Thu, 03 Dec 2009 19:39:27 +0100
++
++freecad (0.9.2646-1) unstable; urgency=low
++
++ [ Werner Mayer ]
++ * New upstream release
++ * In-source copy of PyCXX has been dropped (closes: #547936)
++ * In-source copy of zipios++ has been dropped (closes: #547941)
++ * Change build-dependency on python2.5-dev to python-dev
++ * Add freecad-doc binary package
++ * Remove Suggestion of a chm viewer, suggest freecad-doc instead
++
++ [ Teemu Ikonen ]
++ * Add override to dh_compress
++ * Add versioned build-deb to debhelper (>= 7.0.50)
++ * Add build-deps to libzipios++-dev and python-cxx-dev.
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Tue, 17 Nov 2009 14:22:00 +0100
++
++freecad (0.8.2237-2) unstable; urgency=low
++
++ * Added libboost-python-dev to Build-Depends (closes: #549738).
++ * Added myself to uploaders list.
++ * Bumped Standards-Version.
++
++ -- Adam C. Powell, IV <hazelsct@debian.org> Thu, 12 Nov 2009 12:02:42 -0500
++
++freecad (0.8.2237-1) unstable; urgency=low
++
++ * New Upstream release
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Thu, 16 Jul 2009 18:37:41 +0200
++
++freecad (0.7.1658-1) UNRELEASED; urgency=low
++
++ * New upstream release
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Mon, 20 Oct 2008 15:35:58 +0200
++
++freecad (0.7.1514-1) UNRELEASED; urgency=low
++
++ * New upstream version
++ * Add more stuff to the copyright file
++ * control: add build-dep to python-central
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Wed, 06 Aug 2008 18:25:02 +0200
++
++freecad (0.7.1350-1hardy1) UNRELEASED; urgency=low
++
++ * Package for Ubuntu 8.04 (Hardy Heron)
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Thu, 29 May 2008 11:11:20 +0200
++
++freecad (0.7.1350-1gutsy1) UNRELEASED; urgency=low
++
++ * Backport to Ubuntu 7.10 (Gutsy Gibbon)
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Sat, 24 May 2008 01:54:39 +0200
++
++freecad (0.7.1350-1feisty1) UNRELEASED; urgency=low
++
++ * Backport to Ubuntu 7.04 (Feisty Fawn)
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Sat, 24 May 2008 00:09:08 +0200
++
++freecad (0.7.1350-1) UNRELEASED; urgency=low
++
++ * New upstream release from sf.net
++ * Import to debian-science repository at git.debian.org
++ * control:
++ - Update to standards-version 3.7.3
++ - Add Vcs-* fields pointing to git.debian.org
++ - Improve descriptions
++ * Convert copyright to (pseudo) machine readable format, audit source
++ * Fix categories in .desktop file
++ * Change Section to Science/Engineering in .doc-base and menu files
++ * rules: do not ignore errors on clean target, add dh_desktop call
++ -- Teemu Ikonen <tpikonen@gmail.com> Tue, 05 Aug 2008 18:58:07 +0200
++
++freecad (0.7.1344-1ubuntu2) UNRELEASED; urgency=low
++
++ * New package with fixed self-dependency problem
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Thu, 22 May 2008 15:34:34 +0200
++
++freecad (0.7.1344-1ubuntu1) UNRELEASED; urgency=low
++
++ * New debian package for Feisty
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Thu, 22 May 2008 11:04:06 +0200
++
++freecad (0.7.1344-1) UNRELEASED; urgency=low
++
++ * Write patch file to make builds with OpenCASCADE libs inside but with no
++ dependency to libopencascade6.2
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Wed, 21 May 2008 10:06:07 +0200
++
++freecad (0.7.1343-1) UNRELEASED; urgency=low
++
++ * Embed required OpenCASCADE libs into this package as long as no official
++ Debian package is available
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Tue, 20 May 2008 00:40:39 +0200
++
++freecad (0.7.1342-1) UNRELEASED; urgency=low
++
++ * Switch to new versioning scheme of OpenCASCADE packages
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Mon, 19 May 2008 23:55:31 +0200
++
++freecad (0.7.1316-1) UNRELEASED; urgency=low
++
++ * Support of pivy (Python binding for Coin/SoQt)
++ * Support of PyQt4
++ * General support of SWIG modules
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Sat, 26 Apr 2008 13:51:25 +0200
++
++freecad (0.7.1031-1) UNRELEASED; urgency=low
++
++ * Qt4 port finished
++ * Support of Python binding for Qt4
++ * Support of Python binding for Coin
++ * Support of entirely in Python written modules
++ * Added support of model driven architecture for Python binding
++ * Use boost's signal/slot mechanism to update data
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Tue, 04 Jan 2008 13:50:37 +0200
++
++freecad (0.7.645-1) UNRELEASED; urgency=low
++
++ * Qt4 port started
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Tue, 24 Jul 2007 13:04:37 +0200
++
++freecad (0.6.472-1) UNRELEASED; urgency=low
++
++ * Initial Release
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Tue, 26 Sep 2006 16:55:15 +0200
--- /dev/null
--- /dev/null
++src/Tools/generateBase/*.pyc
++src/Tools/generateTemplates/*.pyc
--- /dev/null
--- /dev/null
++11
--- /dev/null
--- /dev/null
++Source: freecad
++Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
++Uploaders: Sebastian Kuzminsky <seb@highlab.com>,
++ Kurt Kremitzki <kurt@kwk.systems>
++Section: science
++Priority: optional
++Build-Depends: cmake,
++ debhelper (>= 11~),
++ dh-exec,
++ dh-python,
++ libboost-date-time-dev,
++ libboost-dev,
++ libboost-filesystem-dev,
++ libboost-graph-dev,
++ libboost-iostreams-dev,
++ libboost-program-options-dev,
++ libboost-python-dev,
++ libboost-regex-dev,
++ libboost-serialization-dev,
++ libboost-signals-dev,
++ libboost-thread-dev,
++ libcoin-dev,
++ libopencv-dev | libcv-dev,
++ libeigen3-dev (>= 3.3~beta1),
++ libgts-bin,
++ libgts-dev,
++ libkdtree++-dev,
++ libmedc-dev,
++ libocct-data-exchange-dev,
++ libocct-ocaf-dev,
++ libocct-visualization-dev,
++ libproj-dev,
++ libpyside2-dev,
++ libqt5opengl5-dev,
++ libqt5svg5-dev,
++ libqt5webkit5-dev,
++ libqt5x11extras5-dev,
++ libshiboken2-dev,
++ libspnav-dev,
++ libvtk7-dev,
++ libx11-dev,
++ libxerces-c-dev,
++ libzipios++-dev,
++ lsb-release,
++ occt-draw,
++ pyside2-tools,
++ python-pyside2.qtcore,
++ python-pyside2.qtgui,
++ python-pyside2.qtsvg,
++ python-pyside2.qtwidgets,
++ python-dev,
++ python-ply,
++ python3-pyside2.qtcore,
++ python3-pyside2.qtgui,
++ python3-pyside2.qtsvg,
++ python3-pyside2.qtwidgets,
++ python3-dev,
++ python3-ply,
++ qtbase5-dev,
++ qttools5-dev,
++ swig,
++Build-Depends-Indep: doxygen
++Standards-Version: 4.3.0
++Vcs-Browser: https://salsa.debian.org/science-team/freecad
++Vcs-Git: https://salsa.debian.org/science-team/freecad.git
++Homepage: http://freecadweb.org/
++
++Package: freecad
++Architecture: all
++Depends: freecad-python2 | freecad-python3,
++ ${misc:Depends},
++ ${shlibs:Depends}
++Recommends: calculix-ccx,
++ graphviz
++Suggests: freecad-doc,
++ povray,
++ python-collada,
++Breaks: freecad (<< 0.18~)
++Replaces: freecad (<< 0.18~)
++Description: Extensible Open Source CAx program
++ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
++ It features some key concepts like macro recording, workbenches, ability
++ to run as a server and dynamically loadable application extensions and
++ it is designed to be platform independent.
++ .
++ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
++ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
++ Editing and modeling features are currently somewhat limited.
++ .
++ This is a metapackage of FreeCAD component packages.
++
++Package: freecad-python2
++Architecture: any
++Depends: freecad-common,
++ freecad-runtime,
++ python-matplotlib,
++ python-pivy,
++ python-pyside2.qtcore,
++ python-pyside2.qtgui,
++ python-pyside2.qtsvg,
++ python-pyside2.qtwidgets,
++ python-pyside2uic,
++ libfreecad-python2-0.18 (<< ${binary:Version}+1~),
++ libfreecad-python2-0.18 (>= ${binary:Version}),
++ ${misc:Depends},
++ ${python:Depends},
++ ${shlibs:Depends}
++Breaks: libfreecad-python2-0.17
++Conflicts: libfreecad-python2-0.17
++Replaces: libfreecad-python2-0.17
++Description: Extensible Open Source CAx program - Python 2 binaries
++ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
++ It features some key concepts like macro recording, workbenches, ability
++ to run as a server and dynamically loadable application extensions and
++ it is designed to be platform independent.
++ .
++ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
++ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
++ Editing and modeling features are currently somewhat limited.
++ .
++ This package contains the FreeCAD binaries built against Python 2.
++
++Package: freecad-python3
++Architecture: any
++Depends: freecad-common,
++ freecad-runtime,
++ python3-matplotlib,
++ python3-pivy,
++ python3-pyside2.qtcore,
++ python3-pyside2.qtgui,
++ python3-pyside2.qtsvg,
++ python3-pyside2.qtwidgets,
++ python3-pyside2uic,
++ libfreecad-python3-0.18 (<< ${binary:Version}+1~),
++ libfreecad-python3-0.18 (>= ${binary:Version}),
++ ${misc:Depends},
++ ${python3:Depends},
++ ${shlibs:Depends}
++Breaks: libfreecad-python2-0.17
++Conflicts: libfreecad-python2-0.17
++Replaces: libfreecad-python2-0.17
++Description: Extensible Open Source CAx program - Python 3 binaries
++ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
++ It features some key concepts like macro recording, workbenches, ability
++ to run as a server and dynamically loadable application extensions and
++ it is designed to be platform independent.
++ .
++ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
++ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
++ Editing and modeling features are currently somewhat limited.
++ .
++ This package contains the FreeCAD binaries built against Python 3.
++
++Package: freecad-runtime
++Architecture: all
++Depends: ${misc:Depends},
++ ${shlibs:Depends}
++Description: Extensible Open Source CAx program - runtime files
++ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
++ It features some key concepts like macro recording, workbenches, ability
++ to run as a server and dynamically loadable application extensions and
++ it is designed to be platform independent.
++ .
++ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
++ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
++ Editing and modeling features are currently somewhat limited.
++ .
++ This package contains Python 2/3 runtime files.
++
++Package: freecad-common
++Architecture: all
++Depends: ${misc:Depends},
++ ${shlibs:Depends}
++Breaks: freecad (<< 0.18~), freecad-python2 (<< 0.18~)
++Conflicts: freecad (<< 0.18~), freecad-python2 (<< 0.18~)
++Replaces: freecad (<< 0.18~), freecad-python2 (<< 0.18~)
++Description: Extensible Open Source CAx program - common files
++ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
++ It features some key concepts like macro recording, workbenches, ability
++ to run as a server and dynamically loadable application extensions and
++ it is designed to be platform independent.
++ .
++ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
++ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
++ Editing and modeling features are currently somewhat limited.
++ .
++ This package contains FreeCAD common files and resources.
++
++Package: libfreecad-python2-0.18
++Architecture: any
++Section: libs
++Depends: ${misc:Depends},
++ ${shlibs:Depends}
++Description: Extensible Open Source CAx program - Python 2 library files
++ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
++ It features some key concepts like macro recording, workbenches, ability
++ to run as a server and dynamically loadable application extensions and
++ it is designed to be platform independent.
++ .
++ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
++ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
++ Editing and modeling features are currently somewhat limited.
++ .
++ This package contains shared library files for FreeCAD built against Python 2.
++
++Package: libfreecad-python3-0.18
++Architecture: any
++Section: libs
++Depends: ${misc:Depends},
++ ${shlibs:Depends}
++Description: Extensible Open Source CAx program - Python 3 library files
++ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
++ It features some key concepts like macro recording, workbenches, ability
++ to run as a server and dynamically loadable application extensions and
++ it is designed to be platform independent.
++ .
++ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
++ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
++ Editing and modeling features are currently somewhat limited.
++ .
++ This package contains shared library files for FreeCAD built against Python 3.
--- /dev/null
--- /dev/null
++Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
++Upstream-Name: FreeCAD
++Upstream-Contact: Werner Mayer <wmayer@users.sourceforge.net>
++Source: https://github.com/freecad/freecad
++Files-Excluded:
++ data/examples
++ data/tests/*.fcstd
++ src/Doc/freecad.qch.part*
++ src/Doc/freecad.qhc
++ src/MacAppBundle
++ src/Tools/_TEMPLATE_
++ src/3rdParty/libkdtree
++
++Files: *
++Copyright: 2001-2016 Jürgen Riegel <juergen.riegel@web.de>,
++ Werner Mayer <wmayer@users.sourceforge.net>
++License: LGPL-2+
++
++Files: src/3rdParty/salomesmesh/*
++Copyright: 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, CEDRAT,
++ EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
++ 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
++License: LGPL-2.1
++
++Files: src/3rdParty/salomesmesh/src/MEFISTO2/*
++Copyright: 2006 Laboratoire J.-L. Lions UPMC Paris
++License: LGPL-2.1
++
++Files: src/Base/Base64.*
++Copyright: 2004-2008 Rene Nyffenegger <rene.nyffenegger@adp-gmbh.ch>
++License: other
++ This source code is provided 'as-is', without any express or implied
++ warranty. In no event will the author be held liable for any damages
++ arising from the use of this software.
++ .
++ Permission is granted to anyone to use this software for any purpose,
++ including commercial applications, and to alter it and redistribute it
++ freely, subject to the following restrictions:
++ .
++ 1. The origin of this source code must not be misrepresented; you must not
++ claim that you wrote the original source code. If you use this source code
++ in a product, an acknowledgment in the product documentation would be
++ appreciated but is not required.
++ .
++ 2. Altered source versions must be plainly marked as such, and must not be
++ misrepresented as being the original source code.
++ .
++ 3. This notice may not be removed or altered from any source distribution.
++
++Files: src/Base/fdstream.hpp
++Copyright: 2001 Nicolai M. Josuttis
++License: other-josuttis
++ Permission to copy, use, modify, sell and distribute this software
++ is granted provided this copyright notice appears in all copies.
++ This software is provided "as is" without express or implied
++ warranty, and with no claim as to its suitability for any purpose.
++
++Files: src/Base/gzstream.*
++Copyright: 2001 Deepak Bandyopadhyay, Lutz Kettner
++License: LGPL-2.1
++
++Files: src/Base/PyTools.*
++Copyright: 1996-2000 Mark Lutz, and O'Reilly and Associates.
++License: other-lutz
++ Permission to use, copy, modify, and distribute this software
++ for any purpose and without fee is hereby granted. This software
++ is provided on an as is basis, without warranties of any kind.
++
++Files: src/Base/BoundBox.h src/Base/Swap.* src/Base/Vector3D.* src/Base/ViewProj.h src/Base/Matrix.* src/Base/Tools2D.* src/Mod/Mesh/App/Core/*
++Copyright: 2005 Imetric 3D GmbH
++License: GPL-2+
++ On Debian systems, the complete text of the GNU General Public
++ License version 2 can be found in `/usr/share/common-licenses/GPL-2'.
++
++Files: src/Gui/iisTaskPanel/src/*
++Copyright: http://www.ii-system.com
++License: LGPL-2.1
++
++Files: src/Mod/Draft/importAirfoilDAT.py
++Copyright: 2010 Heiko Jakob <heiko.jakob@gediegos.de>
++License: LGPL-2+
++
++Files: src/Mod/Mesh/App/Core/Builder.h
++ src/Mod/Mesh/App/Core/SetOperations.*
++ src/Mod/Mesh/BuildRegularGeoms.py
++Copyright: 2005 Berthold Grupp
++License: LGPL-2+
++
++Files: src/Mod/Image/App/ImageBase.* src/Mod/Image/Gui/GLImageBox.* src/Mod/Image/Gui/ImageView.* src/Mod/Image/Gui/XpmImages.h
++Copyright: 2004 Imetric 3D GmbH
++License: LGPL-2+
++
++Files: src/Mod/Mesh/App/Core/tritritest.h
++Copyright: 1997 Tomas Moller <tam@cs.lth.se>
++License: other-moller
++ tritritest.h has no licensing information, but Tomas Moller replied
++ the following, when asked about it:
++ .
++ The code is free to use for anyone and any projects, but I give no
++ warranties.
++
++Files: src/Mod/Mesh/App/WildMagic4/*
++Copyright: 1998-2007 David Eberly http://www.geometrictools.com
++License: LGPL-2.1+
++
++Files: src/Mod/Part/App/edgecluster.*
++Copyright: 2010 Joachim Zettler <Joachim.Zettler@gmx.de>
++License: LGPL-2+
++
++Files: src/Mod/Raytracing/App/resources/*
++Copyright: 2005 Georg Wiora <georg.wiora@quarkbox.de>,
++ Juergen Riegel <juergen.riegel@web.de>
++License: LGPL-2+
++
++Files: src/Mod/Test/unittestgui.py
++Copyright: 1999-2001 Steve Purcell
++License: PSF
++ This module is free software, and you may redistribute it and/or modify
++ it under the same terms as Python itself, so long as this copyright message
++ and disclaimer are retained in their original form.
++ .
++ IN NO EVENT SHALL THE AUTHOR BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
++ SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
++ THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
++ DAMAGE.
++ .
++ THE AUTHOR SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT
++ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
++ PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS,
++ AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE,
++ SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
++
++Files: src/Tools/generateBase/generateDS.py
++Copyright: 2003 Dave Kuhlman
++License: Expat
++ Permission is hereby granted, free of charge, to any person obtaining
++ a copy of this software and associated documentation files (the
++ "Software"), to deal in the Software without restriction, including
++ without limitation the rights to use, copy, modify, merge, publish,
++ distribute, sublicense, and/or sell copies of the Software, and to
++ permit persons to whom the Software is furnished to do so, subject to
++ the following conditions:
++ .
++ The above copyright notice and this permission notice shall be included
++ in all copies or substantial portions of the Software.
++ .
++ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
++ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
++ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
++ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
++ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
++ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++
++Files: src/Base/QuantityParser.c src/Gui/SelectionFilter.tab.c
++Copyright: 1984, 1989-1990, 2000-2006, 2009-2010 Free Software Foundation, Inc.
++License: GPL-3+ with Bison exception
++ This program is free software: you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation, either version 3 of the License, or
++ (at your option) any later version.
++ .
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++ .
++ You should have received a copy of the GNU General Public License
++ along with this program. If not, see <http://www.gnu.org/licenses/>.
++ .
++ As a special exception, you may create a larger work that contains
++ part or all of the Bison parser skeleton and distribute that work
++ under terms of your choice, so long as that work isn't itself a
++ parser generator using the skeleton or a modified version thereof
++ as a parser skeleton. Alternatively, if you modify or redistribute
++ the parser skeleton itself, you may (at your option) remove this
++ special exception, which will cause the skeleton and the resulting
++ Bison output files to be licensed under the GNU General Public
++ License without this special exception.
++ .
++ This special exception was added by the Free Software Foundation in
++ version 2.2 of Bison.
++ .
++ C LALR(1) parser skeleton written by Richard Stallman, by
++ simplifying the original so-called "semantic" parser.
++ .
++ All symbols defined below should begin with yy or YY, to avoid
++ infringing on user name space. This should be done even for local
++ variables, as they might otherwise be expanded by user macros.
++ There are some unavoidable exceptions within include files to
++ define necessary library symbols; they are noted "INFRINGES ON
++ USER NAME SPACE" below.
++
++Files: src/CXX/*
++Copyright: (c) 1998 - 2007 The Regents of the University of California
++License: BSD-3-with-notice
++ Redistribution and use in source and binary forms, with or without
++ modification, are permitted provided that the following conditions are met:
++ .
++ - Redistributions of source code must retain the above copyright notice, this
++ list of conditions and the disclaimer below.
++ - Redistributions in binary form must reproduce the above copyright notice,
++ this list of conditions and the disclaimer (as noted below) in the
++ documentation and/or materials provided with the distribution.
++ - Neither the name of the UC/LLNL nor the names of its contributors may be
++ used to endorse or promote products derived from this software without
++ specific prior written permission.
++ .
++ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
++ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OF THE UNIVERSITY OF CALIFORNIA,
++ THE U.S. DEPARTMENT OF ENERGY OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
++ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
++ BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ .
++ Additional BSD Notice
++ .
++ 1. This notice is required to be provided under our contract with the U.S.
++ Department of Energy (DOE). This work was produced at the University of
++ California, Lawrence Livermore National Laboratory under Contract No.
++ W-7405-ENG-48 with the DOE.
++ .
++ 2. Neither the United States Government nor the University of California
++ nor any of their employees, makes any warranty, express or implied, or
++ assumes any liability or responsibility for the accuracy, completeness,
++ or usefulness of any information, apparatus, product, or process disclosed,
++ or represents that its use would not infringe privately-owned rights.
++ .
++ 3. Also, reference herein to any specific commercial products, process, or
++ services by trade name, trademark, manufacturer or otherwise does not
++ necessarily constitute or imply its endorsement, recommendation, or
++ favoring by the United States Government or the University of California.
++ The views and opinions of authors expressed herein do not necessarily
++ state or reflect those of the United States Government or the University
++ of California, and shall not be used for advertising or product endorsement
++ purposes.
++
++Files: src/Gui/QSint/*
++Copyright: (c) QSint developers
++License: LGPL-3
++ On Debian systems, the complete text of the GNU Lesser General Public
++ License version 3 can be found in `/usr/share/common-licenses/LGPL-3'.
++
++License: LGPL-2.1+
++ On Debian systems, the complete text of the GNU Lesser General Public
++ License version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1'.
++
++License: LGPL-2.1
++ On Debian systems, the complete text of the GNU Lesser General Public
++ License version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1'.
++
++License: LGPL-2+
++ On Debian systems, the complete text of the GNU Lesser General Public
++ License version 2 can be found in `/usr/share/common-licenses/LGPL-2'.
--- /dev/null
--- /dev/null
++#!/usr/bin/dh-exec
++debian/freecad.desktop usr/share/applications
++usr/share/freecad/freecad-icon-16.png => usr/share/icons/hicolor/16x16/apps/freecad.png
++usr/share/freecad/freecad-icon-32.png => usr/share/icons/hicolor/32x32/apps/freecad.png
++usr/share/freecad/freecad-icon-48.png => usr/share/icons/hicolor/48x48/apps/freecad.png
++usr/share/freecad/freecad-icon-64.png => usr/share/icons/hicolor/64x64/apps/freecad.png
++usr/share/freecad/freecad.svg usr/share/icons/hicolor/scalable/apps
++
++usr/share/doc/freecad-doc/ThirdPartyLibraries.html usr/share/freecad
++usr/share/freecad/freecad.xpm
++usr/share/freecad/freecad-doc.png
++
++usr/share/freecad/Mod/Arch/Resources/icons/ArchWorkbench.svg
++usr/share/freecad/Mod/Drawing/Resources/icons/DrawingWorkbench.svg
++usr/share/freecad/Mod/OpenSCAD/Resources/icons/OpenSCADWorkbench.svg
++usr/share/freecad/Mod/Plot/resources/icons/PlotWorkbench.svg
++usr/share/freecad/Mod/PartDesign/Resources/icons/PartDesignWorkbench.svg
++usr/share/freecad/Mod/PartDesign/WizardShaft/WizardShaft.svg
++usr/share/freecad/Mod/Sketcher/Resources/icons/SketcherWorkbench.svg
++usr/share/freecad/Mod/Inspection/Resources/icons/InspectionWorkbench.svg
++usr/share/freecad/Mod/Raytracing/Resources/icons/RaytracingWorkbench.svg
++usr/share/freecad/Mod/ReverseEngineering/Resources/icons/ReverseEngineeringWorkbench.svg
++usr/share/freecad/Mod/Path/Resources/icons/PathWorkbench.svg
++usr/share/freecad/Mod/Test/Resources/icons/TestWorkbench.svg
++usr/share/freecad/Mod/Mesh/Resources/icons/MeshWorkbench.svg
++usr/share/freecad/Mod/Robot/Resources/icons/RobotWorkbench.svg
++usr/share/freecad/Mod/Draft/Resources/icons/DraftWorkbench.svg
++usr/share/freecad/Mod/Image/Resources/icons/ImageWorkbench.svg
++usr/share/freecad/Mod/Ship/resources/icons/ShipWorkbench.svg
++usr/share/freecad/Mod/Fem/Resources/icons/FemWorkbench.svg
++usr/share/freecad/Mod/Start/Resources/icons/StartWorkbench.svg
++usr/share/freecad/Mod/Points/Resources/icons/PointsWorkbench.svg
++usr/share/freecad/Mod/Complete/Resources/icons/CompleteWorkbench.svg
++usr/share/freecad/Mod/Part/Resources/icons/PartWorkbench.svg
++usr/share/freecad/Mod/Web/Resources/icons/WebWorkbench.svg
++
++usr/share/freecad/Mod/Raytracing/Templates/*.lxs
++usr/share/freecad/Mod/Raytracing/Templates/*.pov
++usr/share/freecad/Mod/Drawing/Templates/*.svg
++usr/share/freecad/Mod/Drawing/Templates/*.dxf
++usr/share/freecad/Mod/TechDraw/Patterns/*.svg
++usr/share/freecad/Mod/TechDraw/Templates/*.svg
++usr/share/freecad/Mod/TechDraw/Templates/HowToExample.svg
++usr/share/freecad/Mod/TechDraw/LineGroup/LineGroup.csv
++usr/share/freecad/Mod/TechDraw/TDTest/*.svg
++usr/share/freecad/Mod/TechDraw/TDTest/TestImage.png
++usr/share/freecad/Mod/TechDraw/PAT/FCPAT.pat
++usr/share/freecad/Mod/TechDraw/Resources/fonts/osifont.license
++usr/share/freecad/Mod/TechDraw/Resources/fonts/osifont-lgpl3fe.ttf
++usr/share/freecad/Mod/TechDraw/Resources/icons/preferences-techdraw.svg
++usr/share/freecad/Mod/Path/PathTests/*.ngc
++usr/share/freecad/Mod/Path/PathTests/boxtest.fcstd
++usr/share/freecad/Mod/Arch/Presets/profiles.csv
++usr/share/freecad/Mod/Robot/Lib/Kuka/*.csv
++usr/share/freecad/Mod/Robot/Lib/Kuka/*.wrl
++usr/share/freecad/Mod/Robot/Lib/Kuka/testprog.dat
++usr/share/freecad/Mod/Robot/Lib/Kuka/testprog.src
++usr/share/freecad/Mod/Robot/Lib/Kuka/kr210.WRL
++usr/share/freecad/Mod/Ship/resources/examples/*.fcstd
++usr/share/freecad/Mod/Idf/Idflibs/*.stp
++usr/share/freecad/Mod/Idf/Idflibs/*.igs
++usr/share/freecad/Mod/Idf/Idflibs/footprints_models.csv
++usr/share/freecad/Mod/Material/FluidMaterial/*.FCMat
++usr/share/freecad/Mod/Material/StandardMaterial/*.FCMat
++usr/share/freecad/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.unv
++usr/share/freecad/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.inp
++usr/share/freecad/Mod/Fem/femtest/testfiles/ccx/*.fcstd
++usr/share/freecad/Mod/Fem/femtest/testfiles/ccx/*.frd
++usr/share/freecad/Mod/Fem/femtest/testfiles/ccx/*_expected_values
++usr/share/freecad/Mod/Fem/femtest/testfiles/ccx/*.inp
++usr/share/freecad/Mod/Fem/femtest/testfiles/ccx/*.dat
++usr/share/freecad/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech_inout_nodes.txt
++usr/share/freecad/Mod/Fem/femtest/testfiles/elmer/ELMERSOLVER_STARTINFO
++usr/share/freecad/Mod/Fem/femtest/testfiles/elmer/group_mesh.geo
++usr/share/freecad/Mod/Fem/femtest/testfiles/elmer/case.sif
++usr/share/freecad/Mod/Points/Resources/icons/PointsWorkbench.svg
++usr/share/freecad/Mod/Complete/Resources/icons/CompleteWorkbench.svg
++usr/share/freecad/Mod/Part/Resources/icons/PartWorkbench.svg
++usr/share/freecad/Gui/Stylesheets/*.qss
++#usr/share/freecad/Gui/Stylesheets/images/*.png
++#usr/share/freecad/Mod/Start/StartPage/complete.jpg
++#usr/share/freecad/Mod/Start/StartPage/blank.png
++#usr/share/freecad/Mod/Start/StartPage/ArchDesign.png
++#usr/share/freecad/Mod/Start/StartPage/ArchExample.png
++#usr/share/freecad/Mod/Start/StartPage/freecad-doc.png
++#usr/share/freecad/Mod/Start/StartPage/Mesh.png
++#usr/share/freecad/Mod/Start/StartPage/ShipExample.png
++#usr/share/freecad/Mod/Start/StartPage/StartPage.css
++#usr/share/freecad/Mod/Start/StartPage/Background.jpg
++#usr/share/freecad/Mod/Start/StartPage/Complete.png
++#usr/share/freecad/Mod/Start/StartPage/Ship.png
++#usr/share/freecad/Mod/Start/StartPage/FreeCAD.png
++#usr/share/freecad/Mod/Start/StartPage/PartDesignExample.png
++#usr/share/freecad/Mod/Start/StartPage/StartPage.html
++#usr/share/freecad/Mod/Start/StartPage/StartPage.js
++#usr/share/freecad/Mod/Start/StartPage/PartDesign.png
++#usr/share/freecad/Mod/Start/StartPage/web.png
++#usr/share/freecad/Mod/Start/StartPage/images/complete.jpg
++#usr/share/freecad/Mod/Start/StartPage/images/blank.png
++#usr/share/freecad/Mod/Start/StartPage/images/Banner.jpeg
++#usr/share/freecad/Mod/Start/StartPage/images/ArchDesign.png
++#usr/share/freecad/Mod/Start/StartPage/images/ArchExample.png
++#usr/share/freecad/Mod/Start/StartPage/images/Mesh.png
++#usr/share/freecad/Mod/Start/StartPage/images/freecad-doc.png
++#usr/share/freecad/Mod/Start/StartPage/images/ShipExample.png
++#usr/share/freecad/Mod/Start/StartPage/images/Background.jpg
++#usr/share/freecad/Mod/Start/StartPage/images/Complete.png
++#usr/share/freecad/Mod/Start/StartPage/images/Ship.png
++#usr/share/freecad/Mod/Start/StartPage/images/FreeCAD.png
++#usr/share/freecad/Mod/Start/StartPage/images/PartDesignExample.png
++#usr/share/freecad/Mod/Start/StartPage/images/PartDesign.png
++#usr/share/freecad/Mod/Start/StartPage/images/web.png
++usr/share/freecad/Mod/Import/DxfPlate/blocks10.rub
++usr/share/freecad/Mod/Import/DxfPlate/tables112.rub
++usr/share/freecad/Mod/Import/DxfPlate/blocks112.rub
++usr/share/freecad/Mod/Import/DxfPlate/header12.rub
++usr/share/freecad/Mod/Import/DxfPlate/entities12.rub
++usr/share/freecad/Mod/Import/DxfPlate/entities14.rub
++usr/share/freecad/Mod/Import/DxfPlate/header0.rub
++usr/share/freecad/Mod/Import/DxfPlate/entities0.rub
++usr/share/freecad/Mod/Import/DxfPlate/tables114.rub
++usr/share/freecad/Mod/Import/DxfPlate/tables20.rub
++usr/share/freecad/Mod/Import/DxfPlate/tables212.rub
++usr/share/freecad/Mod/Import/DxfPlate/tables10.rub
++usr/share/freecad/Mod/Import/DxfPlate/blocks114.rub
++usr/share/freecad/Mod/Import/DxfPlate/header14.rub
++usr/share/freecad/Mod/Import/DxfPlate/objects14.rub
++usr/share/freecad/Mod/Import/DxfPlate/classes14.rub
++usr/share/freecad/Mod/Import/DxfPlate/tables214.rub
++usr/share/freecad/Mod/Start/StartPage/StartPage.js
++usr/share/freecad/Mod/Start/StartPage/StartPage.css
++usr/share/freecad/Mod/Start/StartPage/StartPage.html
++usr/share/freecad/Mod/Start/StartPage/images/manual.png
++usr/share/freecad/Mod/Start/StartPage/images/poweruserhub.png
++usr/share/freecad/Mod/Start/StartPage/images/freecad.png
++usr/share/freecad/Mod/Start/StartPage/images/new_file_thumbnail.svg
++usr/share/freecad/Mod/Start/StartPage/images/installed.png
++usr/share/freecad/Mod/Start/StartPage/images/userhub.png
++usr/share/freecad/Mod/Start/StartPage/images/developerhub.png
++usr/share/freecad/Mod/Path/PathTests/test_geomop.fcstd
++usr/share/freecad/Mod/Path/Images/Tools/v-bit.svg
++usr/share/freecad/Mod/Path/Images/Tools/drill.svg
++usr/share/freecad/Mod/Path/Images/Tools/endmill.svg
++usr/share/freecad/Mod/Path/Images/Ops/chamfer.svg
++usr/share/freecad/Mod/Arch/Presets/pset_definitions.csv
++usr/share/freecad/Mod/Material/MatPropDict.xml
++usr/share/freecad/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.vtk
++usr/share/freecad/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.z88
++usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_vertical_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_lighter.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_closed_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/Vmovetoolbar_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/Hsepartoolbar_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_lighter.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_horizontal_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/Vsepartoolbar_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_disabled_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/close_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/more_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_closed_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_disabled_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_lighter.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_lighter.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/checkbox_indeterminate_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_darker.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_darker.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_disabled_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_open_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_darker.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_closed_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_closed_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/undock_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_disabled_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/background_freecad.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_vertical_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_horizontal_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/checkbox_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_open_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_disabled_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/close_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/radiobutton_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_darker.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/transparent.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_open_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_open_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_vline_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/sizegrip_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_vline_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/Hmovetoolbar_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_disabled_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/Hmovetoolbar_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/Vsepartoolbar_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_disabled_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_darker.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/more_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_disabled_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/sizegrip_light.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/undock_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/Hsepartoolbar_dark.svg
++usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_lighter.svg
++usr/share/freecad/share/mime/packages/org.freecadweb.FreeCAD.xml
++usr/share/freecad/share/applications/org.freecadweb.FreeCAD.desktop
++usr/share/freecad/share/icons/hicolor/scalable/apps/org.freecadweb.FreeCAD.svg
++usr/share/freecad/share/metainfo/org.freecadweb.FreeCAD.appdata.xml
--- /dev/null
--- /dev/null
++usr/share/freecad/ThirdPartyLibraries.html usr/share/doc/freecad-doc/ThirdPartyLibraries.html
++usr/share/freecad/Gui usr/lib/freecad/Gui
--- /dev/null
--- /dev/null
++# /usr/bin/freecad is a symlink, handled by update-alternatives, pointing at
++# either /usr/lib/freecad/bin//freecad-python2 or -python3
++desktop-command-not-in-package
--- /dev/null
--- /dev/null
++#!/usr/bin/dh-exec
++usr/share/freecad/bin/FreeCADCmd-Python2 => usr/lib/freecad/bin/freecadcmd-python2
++usr/share/freecad/bin/FreeCAD-Python2 => usr/lib/freecad/bin/freecad-python2
--- /dev/null
--- /dev/null
++debian/freecad.1
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++update-alternatives --install /usr/bin/freecad freecad /usr/lib/freecad/bin/freecad-python2 30 \
++ --slave /usr/bin/freecadcmd freecadcmd /usr/lib/freecad/bin/freecadcmd-python2 \
++ --slave /usr/lib/freecad/lib freecadlib /usr/lib/freecad-python2/lib
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++case "$1" in
++ remove|deconfigure)
++ update-alternatives --remove freecad /usr/lib/freecad/bin/freecad-python2
++ ;;
++
++ upgrade|failed-upgrade)
++ ;;
++
++ *)
++ echo "prerm called with unknown argument '$1'" >&2
++ exit 0
++ ;;
++esac
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/usr/bin/dh-exec
++usr/share/freecad/bin/FreeCADCmd-Python3 => usr/lib/freecad/bin/freecadcmd-python3
++usr/share/freecad/bin/FreeCAD-Python3 => usr/lib/freecad/bin/freecad-python3
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++update-alternatives --install /usr/bin/freecad freecad /usr/lib/freecad/bin/freecad-python3 30 \
++ --slave /usr/bin/freecadcmd freecadcmd /usr/lib/freecad/bin/freecadcmd-python3 \
++ --slave /usr/lib/freecad/lib freecadlib /usr/lib/freecad-python3/lib
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++case "$1" in
++ remove|deconfigure)
++ update-alternatives --remove freecad /usr/lib/freecad/bin/freecad-python3
++ ;;
++
++ upgrade|failed-upgrade)
++ ;;
++
++ *)
++ echo "prerm called with unknown argument '$1'" >&2
++ exit 0
++ ;;
++esac
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++usr/share/freecad/Ext/freecad/__init__.py
++usr/share/freecad/Mod/Spreadsheet/importXLSX.py
++usr/share/freecad/Mod/Spreadsheet/TestSpreadsheet.py
++usr/share/freecad/Mod/Spreadsheet/Init.py
++usr/share/freecad/Mod/Spreadsheet/InitGui.py
++usr/share/freecad/Mod/Spreadsheet/Resources/icons/SpreadsheetWorkbench.svg
++usr/share/freecad/Mod/OpenSCAD/OpenSCAD2Dgeom.py
++usr/share/freecad/Mod/OpenSCAD/expandplacements.py
++usr/share/freecad/Mod/OpenSCAD/importCSG.py
++usr/share/freecad/Mod/OpenSCAD/OpenSCAD_rc.py
++usr/share/freecad/Mod/OpenSCAD/OpenSCADUtils.py
++usr/share/freecad/Mod/OpenSCAD/replaceobj.py
++usr/share/freecad/Mod/OpenSCAD/Init.py
++usr/share/freecad/Mod/OpenSCAD/OpenSCADCommands.py
++usr/share/freecad/Mod/OpenSCAD/InitGui.py
++usr/share/freecad/Mod/OpenSCAD/exportCSG.py
++usr/share/freecad/Mod/OpenSCAD/OpenSCADFeatures.py
++usr/share/freecad/Mod/OpenSCAD/colorcodeshapes.py
++usr/share/freecad/Mod/OpenSCAD/tokrules.py
++usr/share/freecad/Mod/Plot/Plot_rc.py
++usr/share/freecad/Mod/Plot/InitGui.py
++usr/share/freecad/Mod/Plot/Plot.py
++usr/share/freecad/Mod/Plot/PlotGui.py
++usr/share/freecad/Mod/Plot/plotUtils/Paths.py
++usr/share/freecad/Mod/Plot/plotUtils/__init__.py
++usr/share/freecad/Mod/Plot/plotPositions/__init__.py
++usr/share/freecad/Mod/Plot/plotPositions/TaskPanel.py
++usr/share/freecad/Mod/Plot/plotPositions/TaskPanel.ui
++usr/share/freecad/Mod/Plot/plotSave/__init__.py
++usr/share/freecad/Mod/Plot/plotSave/TaskPanel.py
++usr/share/freecad/Mod/Plot/plotSave/TaskPanel.ui
++usr/share/freecad/Mod/Plot/plotSeries/__init__.py
++usr/share/freecad/Mod/Plot/plotSeries/TaskPanel.py
++usr/share/freecad/Mod/Plot/plotSeries/TaskPanel.ui
++usr/share/freecad/Mod/Plot/plotLabels/__init__.py
++usr/share/freecad/Mod/Plot/plotLabels/TaskPanel.py
++usr/share/freecad/Mod/Plot/plotLabels/TaskPanel.ui
++usr/share/freecad/Mod/Plot/plotAxes/__init__.py
++usr/share/freecad/Mod/Plot/plotAxes/TaskPanel.py
++usr/share/freecad/Mod/Plot/plotAxes/TaskPanel.ui
++usr/share/freecad/Mod/PartDesign/TestPartDesignGui.py
++usr/share/freecad/Mod/PartDesign/InvoluteGearFeature.py
++usr/share/freecad/Mod/PartDesign/__init__.py
++usr/share/freecad/Mod/PartDesign/TestPartDesignApp.py
++usr/share/freecad/Mod/PartDesign/Init.py
++usr/share/freecad/Mod/PartDesign/InitGui.py
++usr/share/freecad/Mod/PartDesign/InvoluteGearFeature.ui
++usr/share/freecad/Mod/PartDesign/Scripts/RadialCopy.py
++usr/share/freecad/Mod/PartDesign/Scripts/__init__.py
++usr/share/freecad/Mod/PartDesign/Scripts/Parallelepiped.py
++usr/share/freecad/Mod/PartDesign/Scripts/FilletArc.py
++usr/share/freecad/Mod/PartDesign/Scripts/DistanceBolt.py
++usr/share/freecad/Mod/PartDesign/Scripts/Spring.py
++usr/share/freecad/Mod/PartDesign/Scripts/Epitrochoid.py
++usr/share/freecad/Mod/PartDesign/Scripts/Gear.py
++usr/share/freecad/Mod/PartDesign/fcgear/fcgeardialog.py
++usr/share/freecad/Mod/PartDesign/fcgear/__init__.py
++usr/share/freecad/Mod/PartDesign/fcgear/fcgear.py
++usr/share/freecad/Mod/PartDesign/fcgear/involute.py
++usr/share/freecad/Mod/PartDesign/fcgear/svggear.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestFillet.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestPad.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestDraft.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestMirrored.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestPrimitive.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestRevolve.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestLinearPattern.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestPipe.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestBoolean.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestDatum.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/__init__.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestMultiTransform.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestPocket.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestPolarPattern.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestThickness.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestHole.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestLoft.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestChamfer.py
++usr/share/freecad/Mod/PartDesign/PartDesignTests/TestShapeBinder.py
++usr/share/freecad/Mod/PartDesign/WizardShaft/__init__.py
++usr/share/freecad/Mod/PartDesign/WizardShaft/WizardShaft.py
++usr/share/freecad/Mod/PartDesign/WizardShaft/SegmentFunction.py
++usr/share/freecad/Mod/PartDesign/WizardShaft/WizardShaftTable.py
++usr/share/freecad/Mod/PartDesign/WizardShaft/ShaftFeature.py
++usr/share/freecad/Mod/PartDesign/WizardShaft/Shaft.py
++usr/share/freecad/Mod/PartDesign/WizardShaft/ShaftDiagram.py
++usr/share/freecad/Mod/Import/stepZ.py
++# usr/share/freecad/Mod/Import/Import_rc.py
++usr/share/freecad/Mod/Import/Init.py
++usr/share/freecad/Mod/Import/InitGui.py
++usr/share/freecad/Mod/Import/gzip_utf8.py
++usr/share/freecad/Mod/Show/TempoVis.py
++usr/share/freecad/Mod/Show/__init__.py
++usr/share/freecad/Mod/Show/FrozenClass.py
++usr/share/freecad/Mod/Show/DepGraphTools.py
++usr/share/freecad/Mod/Sketcher/SketcherExample.py
++usr/share/freecad/Mod/Sketcher/Init.py
++usr/share/freecad/Mod/Sketcher/InitGui.py
++usr/share/freecad/Mod/Sketcher/Profiles.py
++usr/share/freecad/Mod/Sketcher/TestSketcherApp.py
++usr/share/freecad/Mod/Sketcher/TestSketcherGui.py
++usr/share/freecad/Mod/Sketcher/ProfileLib/__init__.py
++usr/share/freecad/Mod/Sketcher/ProfileLib/Hexagon.py
++usr/share/freecad/Mod/Sketcher/ProfileLib/RegularPolygon.py
++usr/share/freecad/Mod/Inspection/Init.py
++usr/share/freecad/Mod/Inspection/InitGui.py
++usr/share/freecad/Mod/Raytracing/RaytracingExample.py
++usr/share/freecad/Mod/Raytracing/Init.py
++usr/share/freecad/Mod/Raytracing/InitGui.py
++usr/share/freecad/Mod/Drawing/DrawingTests.py
++usr/share/freecad/Mod/Drawing/DrawingPatterns.py
++usr/share/freecad/Mod/Drawing/DrawingExample.py
++usr/share/freecad/Mod/Drawing/Init.py
++usr/share/freecad/Mod/Drawing/InitGui.py
++usr/share/freecad/Mod/TechDraw/TDTest/DVAnnoSymImageTest.py
++usr/share/freecad/Mod/TechDraw/TDTest/DVPartTest.py
++usr/share/freecad/Mod/TechDraw/TDTest/__init__.py
++usr/share/freecad/Mod/TechDraw/TDTest/DProjGroupTest.py
++usr/share/freecad/Mod/TechDraw/TDTest/DVSectionTest.py
++usr/share/freecad/Mod/TechDraw/TDTest/DVDimensionTest.py
++usr/share/freecad/Mod/TechDraw/TDTest/DHatchTest.py
++usr/share/freecad/Mod/TechDraw/TestTechDrawApp.py
++usr/share/freecad/Mod/TechDraw/Init.py
++usr/share/freecad/Mod/TechDraw/InitGui.py
++usr/share/freecad/Mod/Tux/Tux_rc.py
++usr/share/freecad/Mod/Tux/PersistentToolbarsGui.py
++usr/share/freecad/Mod/Tux/PersistentToolbars.py
++usr/share/freecad/Mod/Tux/NavigationIndicatorGui.py
++usr/share/freecad/Mod/Tux/InitGui.py
++usr/share/freecad/Mod/Path/TestPathApp.py
++usr/share/freecad/Mod/Path/PathCommands.py
++usr/share/freecad/Mod/Path/Init.py
++usr/share/freecad/Mod/Path/InitGui.py
++usr/share/freecad/Mod/Path/PathTests/TestPathStock.py
++usr/share/freecad/Mod/Path/PathTests/TestPathTool.py
++usr/share/freecad/Mod/Path/PathTests/TestPathUtil.py
++usr/share/freecad/Mod/Path/PathTests/TestPathDepthParams.py
++usr/share/freecad/Mod/Path/PathTests/TestPathDressupDogbone.py
++usr/share/freecad/Mod/Path/PathTests/TestPathPost.py
++usr/share/freecad/Mod/Path/PathTests/TestPathGeom.py
++usr/share/freecad/Mod/Path/PathTests/__init__.py
++usr/share/freecad/Mod/Path/PathTests/TestPathToolController.py
++usr/share/freecad/Mod/Path/PathTests/TestPathDressupHoldingTags.py
++usr/share/freecad/Mod/Path/PathTests/TestPathLog.py
++usr/share/freecad/Mod/Path/PathTests/TestPathSetupSheet.py
++usr/share/freecad/Mod/Path/PathTests/TestPathCore.py
++usr/share/freecad/Mod/Path/PathTests/PathTestUtils.py
++usr/share/freecad/Mod/Path/PathTests/TestPathTooltable.py
++usr/share/freecad/Mod/Path/PathScripts/PathToolController.py
++usr/share/freecad/Mod/Path/PathScripts/PathSurface.py
++usr/share/freecad/Mod/Path/PathScripts/PathSimpleCopy.py
++usr/share/freecad/Mod/Path/PathScripts/PathCircularHoleBase.py
++usr/share/freecad/Mod/Path/PathScripts/PathIconViewProvider.py
++usr/share/freecad/Mod/Path/PathScripts/PathPreferences.py
++usr/share/freecad/Mod/Path/PathScripts/PathPocketGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathProfileBase.py
++usr/share/freecad/Mod/Path/PathScripts/PathProfileContour.py
++usr/share/freecad/Mod/Path/PathScripts/PathEngraveGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathStock.py
++usr/share/freecad/Mod/Path/PathScripts/PathJobGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathCircularHoleBaseGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathSimulatorGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathAreaOp.py
++usr/share/freecad/Mod/Path/PathScripts/PathDressupTagGui.py
++usr/share/freecad/Mod/Path/PathScripts/PostUtils.py
++usr/share/freecad/Mod/Path/PathScripts/PathProfileFaces.py
++usr/share/freecad/Mod/Path/PathScripts/PathPocketBase.py
++usr/share/freecad/Mod/Path/PathScripts/PathSanity.py
++usr/share/freecad/Mod/Path/PathScripts/PathComment.py
++usr/share/freecad/Mod/Path/PathScripts/PathUtil.py
++usr/share/freecad/Mod/Path/PathScripts/PathDressupTagPreferences.py
++usr/share/freecad/Mod/Path/PathScripts/PathToolLibraryManager.py
++usr/share/freecad/Mod/Path/PathScripts/PathPreferencesPathDressup.py
++usr/share/freecad/Mod/Path/PathScripts/PathPreferencesPathJob.py
++usr/share/freecad/Mod/Path/PathScripts/PathDressupTag.py
++usr/share/freecad/Mod/Path/PathScripts/PathDrilling.py
++usr/share/freecad/Mod/Path/PathScripts/PathProfileFacesGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathPocketShape.py
++usr/share/freecad/Mod/Path/PathScripts/__init__.py
++usr/share/freecad/Mod/Path/PathScripts/PathMillFace.py
++usr/share/freecad/Mod/Path/PathScripts/PathDrillingGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathProfileBaseGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathSurfaceGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathEngrave.py
++usr/share/freecad/Mod/Path/PathScripts/PathUtils.py
++usr/share/freecad/Mod/Path/PathScripts/PathPocketShapeGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathCommands.py
++usr/share/freecad/Mod/Path/PathScripts/PathSetupSheet.py
++usr/share/freecad/Mod/Path/PathScripts/PathHelixGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathJob.py
++usr/share/freecad/Mod/Path/PathScripts/PathDressupDragknife.py
++usr/share/freecad/Mod/Path/PathScripts/PathProfileEdgesGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathCopy.py
++usr/share/freecad/Mod/Path/PathScripts/PathProfileEdges.py
++usr/share/freecad/Mod/Path/PathScripts/PathArray.py
++usr/share/freecad/Mod/Path/PathScripts/PathInspect.py
++usr/share/freecad/Mod/Path/PathScripts/PathFixture.py
++usr/share/freecad/Mod/Path/PathScripts/PathGetPoint.py
++usr/share/freecad/Mod/Path/PathScripts/PathDressupDogbone.py
++usr/share/freecad/Mod/Path/PathScripts/PathGeom.py
++usr/share/freecad/Mod/Path/PathScripts/PathHop.py
++usr/share/freecad/Mod/Path/PathScripts/PathCustom.py
++usr/share/freecad/Mod/Path/PathScripts/PathLog.py
++usr/share/freecad/Mod/Path/PathScripts/PathOp.py
++usr/share/freecad/Mod/Path/PathScripts/PathMillFaceGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathPostProcessor.py
++usr/share/freecad/Mod/Path/PathScripts/PathDressup.py
++usr/share/freecad/Mod/Path/PathScripts/PathPocket.py
++usr/share/freecad/Mod/Path/PathScripts/PathJobCmd.py
++usr/share/freecad/Mod/Path/PathScripts/PathDressupHoldingTags.py
++usr/share/freecad/Mod/Path/PathScripts/PathOpGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathPost.py
++usr/share/freecad/Mod/Path/PathScripts/PathStop.py
++usr/share/freecad/Mod/Path/PathScripts/PathGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathSelection.py
++usr/share/freecad/Mod/Path/PathScripts/PathProfileContourGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathDressupLeadInOut.py
++usr/share/freecad/Mod/Path/PathScripts/PathPocketBaseGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathDressupRampEntry.py
++usr/share/freecad/Mod/Path/PathScripts/PathHelix.py
++usr/share/freecad/Mod/Path/PathScripts/post/slic3r_pre.py
++usr/share/freecad/Mod/Path/PathScripts/post/opensbp_pre.py
++usr/share/freecad/Mod/Path/PathScripts/post/philips_post.py
++usr/share/freecad/Mod/Path/PathScripts/post/linuxcnc_post.py
++usr/share/freecad/Mod/Path/PathScripts/post/__init__.py
++usr/share/freecad/Mod/Path/PathScripts/post/dynapath_post.py
++usr/share/freecad/Mod/Path/PathScripts/post/centroid_post.py
++usr/share/freecad/Mod/Path/PathScripts/post/smoothie_post.py
++usr/share/freecad/Mod/Path/PathScripts/post/grbl_post.py
++usr/share/freecad/Mod/Path/PathScripts/post/example_pre.py
++usr/share/freecad/Mod/Path/PathScripts/post/rml_post.py
++usr/share/freecad/Mod/Path/PathScripts/post/comparams_post.py
++usr/share/freecad/Mod/Path/PathScripts/post/opensbp_post.py
++usr/share/freecad/Mod/ReverseEngineering/Init.py
++usr/share/freecad/Mod/ReverseEngineering/InitGui.py
++usr/share/freecad/Mod/Test/TestApp.py
++usr/share/freecad/Mod/Test/unittestgui.py
++usr/share/freecad/Mod/Test/qtunittest.py
++usr/share/freecad/Mod/Test/__init__.py
++usr/share/freecad/Mod/Test/Workbench.py
++usr/share/freecad/Mod/Test/Menu.py
++usr/share/freecad/Mod/Test/Init.py
++usr/share/freecad/Mod/Test/InitGui.py
++usr/share/freecad/Mod/Test/TestGui.py
++usr/share/freecad/Mod/Test/Document.py
++usr/share/freecad/Mod/Test/BaseTests.py
++usr/share/freecad/Mod/Test/UnicodeTests.py
++usr/share/freecad/Mod/Test/testmakeWireString.py
++usr/share/freecad/Mod/Test/UnitTests.py
++usr/share/freecad/Mod/Surface/Init.py
++usr/share/freecad/Mod/Surface/InitGui.py
++usr/share/freecad/Mod/Mesh/Init.py
++usr/share/freecad/Mod/Mesh/InitGui.py
++usr/share/freecad/Mod/Mesh/MeshTestsApp.py
++usr/share/freecad/Mod/Mesh/BuildRegularGeoms.py
++usr/share/freecad/Mod/Arch/ArchPipe.py
++usr/share/freecad/Mod/Arch/ArchNesting.py
++usr/share/freecad/Mod/Arch/ArchSectionPlane.py
++usr/share/freecad/Mod/Arch/Arch_rc.py
++usr/share/freecad/Mod/Arch/ArchSpace.py
++usr/share/freecad/Mod/Arch/ArchSite.py
++usr/share/freecad/Mod/Arch/ArchRebar.py
++usr/share/freecad/Mod/Arch/ArchWindow.py
++usr/share/freecad/Mod/Arch/ArchWall.py
++usr/share/freecad/Mod/Arch/ArchComponent.py
++usr/share/freecad/Mod/Arch/import3DS.py
++usr/share/freecad/Mod/Arch/importSH3D.py
++usr/share/freecad/Mod/Arch/ArchFloor.py
++usr/share/freecad/Mod/Arch/ArchEquipment.py
++usr/share/freecad/Mod/Arch/ArchCommands.py
++usr/share/freecad/Mod/Arch/ArchStairs.py
++usr/share/freecad/Mod/Arch/importOBJ.py
++usr/share/freecad/Mod/Arch/TestArch.py
++usr/share/freecad/Mod/Arch/ArchPanel.py
++usr/share/freecad/Mod/Arch/importIFClegacy.py
++usr/share/freecad/Mod/Arch/importDAE.py
++usr/share/freecad/Mod/Arch/Init.py
++usr/share/freecad/Mod/Arch/ArchAxis.py
++usr/share/freecad/Mod/Arch/InitGui.py
++usr/share/freecad/Mod/Arch/ArchPrecast.py
++usr/share/freecad/Mod/Arch/importJSON.py
++usr/share/freecad/Mod/Arch/ArchVRM.py
++usr/share/freecad/Mod/Arch/ArchSchedule.py
++usr/share/freecad/Mod/Arch/ArchFrame.py
++usr/share/freecad/Mod/Arch/ArchProfile.py
++usr/share/freecad/Mod/Arch/importWebGL.py
++usr/share/freecad/Mod/Arch/importIFC.py
++usr/share/freecad/Mod/Arch/ArchBuilding.py
++usr/share/freecad/Mod/Arch/ArchStructure.py
++usr/share/freecad/Mod/Arch/ArchCutPlane.py
++usr/share/freecad/Mod/Arch/Arch.py
++usr/share/freecad/Mod/Arch/ArchMaterial.py
++usr/share/freecad/Mod/Arch/ArchRoof.py
++usr/share/freecad/Mod/Arch/Dice3DS/util.py
++usr/share/freecad/Mod/Arch/Dice3DS/__init__.py
++usr/share/freecad/Mod/Arch/Dice3DS/dom3ds.py
++usr/share/freecad/Mod/AddonManager/AddonManagerGui.py
++usr/share/freecad/Mod/AddonManager/Init.py
++usr/share/freecad/Mod/AddonManager/InitGui.py
++usr/share/freecad/Mod/AddonManager/AddonManager.py
++usr/share/freecad/Mod/Robot/MovieTool.py
++usr/share/freecad/Mod/Robot/KukaExporter.py
++usr/share/freecad/Mod/Robot/Init.py
++usr/share/freecad/Mod/Robot/InitGui.py
++usr/share/freecad/Mod/Robot/RobotExample.py
++usr/share/freecad/Mod/Robot/RobotExampleTrajectoryOutOfShapes.py
++usr/share/freecad/Mod/Draft/DraftTools.py
++usr/share/freecad/Mod/Draft/DraftGui.py
++usr/share/freecad/Mod/Draft/TestDraft.py
++usr/share/freecad/Mod/Draft/importDXF.py
++usr/share/freecad/Mod/Draft/DraftGeomUtils.py
++usr/share/freecad/Mod/Draft/importDWG.py
++usr/share/freecad/Mod/Draft/DraftVecUtils.py
++usr/share/freecad/Mod/Draft/DraftTrackers.py
++usr/share/freecad/Mod/Draft/importAirfoilDAT.py
++usr/share/freecad/Mod/Draft/Init.py
++usr/share/freecad/Mod/Draft/Draft.py
++usr/share/freecad/Mod/Draft/InitGui.py
++usr/share/freecad/Mod/Draft/WorkingPlane.py
++usr/share/freecad/Mod/Draft/importOCA.py
++usr/share/freecad/Mod/Draft/importSVG.py
++usr/share/freecad/Mod/Draft/DraftSnap.py
++usr/share/freecad/Mod/Draft/Draft_rc.py
++usr/share/freecad/Mod/Image/Init.py
++usr/share/freecad/Mod/Image/InitGui.py
++usr/share/freecad/Mod/Ship/ShipGui.py
++usr/share/freecad/Mod/Ship/TankInstance.py
++usr/share/freecad/Mod/Ship/Instance.py
++usr/share/freecad/Mod/Ship/WeightInstance.py
++usr/share/freecad/Mod/Ship/InitGui.py
++usr/share/freecad/Mod/Ship/Ship_rc.py
++usr/share/freecad/Mod/Ship/shipOutlineDraw/__init__.py
++usr/share/freecad/Mod/Ship/shipOutlineDraw/TaskPanel.py
++usr/share/freecad/Mod/Ship/shipOutlineDraw/Preview.py
++usr/share/freecad/Mod/Ship/shipOutlineDraw/TaskPanel.ui
++usr/share/freecad/Mod/Ship/shipAreasCurve/__init__.py
++usr/share/freecad/Mod/Ship/shipAreasCurve/TaskPanel.py
++usr/share/freecad/Mod/Ship/shipAreasCurve/Preview.py
++usr/share/freecad/Mod/Ship/shipAreasCurve/PlotAux.py
++usr/share/freecad/Mod/Ship/shipAreasCurve/TaskPanel.ui
++usr/share/freecad/Mod/Ship/shipCreateLoadCondition/Tools.py
++usr/share/freecad/Mod/Ship/shipCreateLoadCondition/__init__.py
++usr/share/freecad/Mod/Ship/shipUtils/Paths.py
++usr/share/freecad/Mod/Ship/shipUtils/__init__.py
++usr/share/freecad/Mod/Ship/shipUtils/Units.py
++usr/share/freecad/Mod/Ship/shipUtils/Locale.py
++usr/share/freecad/Mod/Ship/shipUtils/Math.py
++usr/share/freecad/Mod/Ship/shipGZ/Tools.py
++usr/share/freecad/Mod/Ship/shipGZ/__init__.py
++usr/share/freecad/Mod/Ship/shipGZ/TaskPanel.py
++usr/share/freecad/Mod/Ship/shipGZ/PlotAux.py
++usr/share/freecad/Mod/Ship/shipGZ/TaskPanel.ui
++usr/share/freecad/Mod/Ship/shipLoadExample/__init__.py
++usr/share/freecad/Mod/Ship/shipLoadExample/TaskPanel.py
++usr/share/freecad/Mod/Ship/shipLoadExample/TaskPanel.ui
++usr/share/freecad/Mod/Ship/shipCreateTank/Tools.py
++usr/share/freecad/Mod/Ship/shipCreateTank/__init__.py
++usr/share/freecad/Mod/Ship/shipCreateTank/TaskPanel.py
++usr/share/freecad/Mod/Ship/shipCreateTank/TaskPanel.ui
++usr/share/freecad/Mod/Ship/shipCreateWeight/Tools.py
++usr/share/freecad/Mod/Ship/shipCreateWeight/__init__.py
++usr/share/freecad/Mod/Ship/shipCreateWeight/TaskPanel.py
++usr/share/freecad/Mod/Ship/shipCreateWeight/TaskPanel.ui
++usr/share/freecad/Mod/Ship/shipCapacityCurve/Tools.py
++usr/share/freecad/Mod/Ship/shipCapacityCurve/__init__.py
++usr/share/freecad/Mod/Ship/shipCapacityCurve/TaskPanel.py
++usr/share/freecad/Mod/Ship/shipCapacityCurve/PlotAux.py
++usr/share/freecad/Mod/Ship/shipCapacityCurve/TaskPanel.ui
++usr/share/freecad/Mod/Ship/shipHydrostatics/Tools.py
++usr/share/freecad/Mod/Ship/shipHydrostatics/__init__.py
++usr/share/freecad/Mod/Ship/shipHydrostatics/TaskPanel.py
++usr/share/freecad/Mod/Ship/shipHydrostatics/PlotAux.py
++usr/share/freecad/Mod/Ship/shipHydrostatics/TaskPanel.ui
++usr/share/freecad/Mod/Ship/shipCreateShip/Tools.py
++usr/share/freecad/Mod/Ship/shipCreateShip/__init__.py
++usr/share/freecad/Mod/Ship/shipCreateShip/TaskPanel.py
++usr/share/freecad/Mod/Ship/shipCreateShip/Preview.py
++usr/share/freecad/Mod/Ship/shipCreateShip/TaskPanel.ui
++usr/share/freecad/Mod/Idf/Init.py
++usr/share/freecad/Mod/Idf/Idf.py
++usr/share/freecad/Mod/Material/importFCMat.py
++usr/share/freecad/Mod/Material/materials-editor.ui
++usr/share/freecad/Mod/Material/Init.py
++usr/share/freecad/Mod/Material/InitGui.py
++usr/share/freecad/Mod/Material/Material.py
++usr/share/freecad/Mod/Material/MaterialEditor.py
++usr/share/freecad/Mod/Material/Material_rc.py
++usr/share/freecad/Mod/MeshPart/Init.py
++usr/share/freecad/Mod/MeshPart/InitGui.py
++usr/share/freecad/Mod/Fem/TestFem.py
++usr/share/freecad/Mod/Fem/ObjectsFem.py
++usr/share/freecad/Mod/Fem/Init.py
++usr/share/freecad/Mod/Fem/InitGui.py
++usr/share/freecad/Mod/Fem/femresult/__init__.py
++usr/share/freecad/Mod/Fem/femresult/resulttools.py
++usr/share/freecad/Mod/Fem/femobjects/_FemSolverCalculix.py
++usr/share/freecad/Mod/Fem/femobjects/_FemElementFluid1D.py
++usr/share/freecad/Mod/Fem/femobjects/_FemElementGeometry1D.py
++usr/share/freecad/Mod/Fem/femobjects/_FemConstraintSelfWeight.py
++usr/share/freecad/Mod/Fem/femobjects/_FemMeshRegion.py
++usr/share/freecad/Mod/Fem/femobjects/_FemMeshResult.py
++usr/share/freecad/Mod/Fem/femobjects/_FemConstraintBodyHeatSource.py
++usr/share/freecad/Mod/Fem/femobjects/__init__.py
++usr/share/freecad/Mod/Fem/femobjects/_FemConstraintElectrostaticPotential.py
++usr/share/freecad/Mod/Fem/femobjects/_FemMeshBoundaryLayer.py
++usr/share/freecad/Mod/Fem/femobjects/FemConstraint.py
++usr/share/freecad/Mod/Fem/femobjects/_FemElementGeometry2D.py
++usr/share/freecad/Mod/Fem/femobjects/_FemConstraintFlowVelocity.py
++usr/share/freecad/Mod/Fem/femobjects/_FemResultMechanical.py
++usr/share/freecad/Mod/Fem/femobjects/_FemMeshGmsh.py
++usr/share/freecad/Mod/Fem/femobjects/_FemConstraintInitialFlowVelocity.py
++usr/share/freecad/Mod/Fem/femobjects/_FemMeshGroup.py
++usr/share/freecad/Mod/Fem/femobjects/_FemMaterialMechanicalNonlinear.py
++usr/share/freecad/Mod/Fem/femobjects/_FemMaterial.py
++usr/share/freecad/Mod/Fem/femobjects/_FemElementRotation1D.py
++usr/share/freecad/Mod/Fem/femcommands/commands.py
++usr/share/freecad/Mod/Fem/femcommands/__init__.py
++usr/share/freecad/Mod/Fem/femcommands/manager.py
++usr/share/freecad/Mod/Fem/femtools/__init__.py
++usr/share/freecad/Mod/Fem/femtools/femutils.py
++usr/share/freecad/Mod/Fem/femtools/ccxtools.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshBoundaryLayer.py
++usr/share/freecad/Mod/Fem/femguiobjects/_TaskPanelFemSolverControl.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshResult.py
++usr/share/freecad/Mod/Fem/femguiobjects/FemSelectionWidgets.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintBodyHeatSource.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMaterial.py
++# usr/share/freecad/Mod/Fem/femguiobjects/FemSelectionObserver.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintElectrostaticPotential.py
++usr/share/freecad/Mod/Fem/femguiobjects/__init__.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemSolverCalculix.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemElementFluid1D.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshGmsh.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry1D.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintInitialFlowVelocity.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMaterialMechanicalNonlinear.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemElementRotation1D.py
++usr/share/freecad/Mod/Fem/femguiobjects/ViewProviderFemConstraint.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry2D.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemResultMechanical.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintSelfWeight.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshGroup.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintFlowVelocity.py
++usr/share/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshRegion.py
++usr/share/freecad/Mod/Fem/feminout/writeFenicsXDMF.py
++usr/share/freecad/Mod/Fem/feminout/__init__.py
++usr/share/freecad/Mod/Fem/feminout/importToolsFem.py
++usr/share/freecad/Mod/Fem/feminout/importZ88O2Results.py
++usr/share/freecad/Mod/Fem/feminout/importFenicsMesh.py
++usr/share/freecad/Mod/Fem/feminout/readFenicsXML.py
++usr/share/freecad/Mod/Fem/feminout/importCcxDatResults.py
++usr/share/freecad/Mod/Fem/feminout/convert2TetGen.py
++usr/share/freecad/Mod/Fem/feminout/readFenicsXDMF.py
++usr/share/freecad/Mod/Fem/feminout/writeFenicsXML.py
++usr/share/freecad/Mod/Fem/feminout/importZ88Mesh.py
++usr/share/freecad/Mod/Fem/feminout/importInpMesh.py
++usr/share/freecad/Mod/Fem/feminout/importVTKResults.py
++usr/share/freecad/Mod/Fem/feminout/importCcxFrdResults.py
++usr/share/freecad/Mod/Fem/femtest/testccxtools.py
++usr/share/freecad/Mod/Fem/femtest/__init__.py
++usr/share/freecad/Mod/Fem/femtest/testsolverframework.py
++usr/share/freecad/Mod/Fem/femtest/testcommon.py
++# usr/share/freecad/Mod/Fem/femtest/testtools.py
++usr/share/freecad/Mod/Fem/femtest/testmesh.py
++usr/share/freecad/Mod/Fem/femtest/testfiles/__init__.py
++usr/share/freecad/Mod/Fem/femtest/testfiles/mesh/__init__.py
++usr/share/freecad/Mod/Fem/femtest/testfiles/ccx/multimat_mesh.py
++usr/share/freecad/Mod/Fem/femtest/testfiles/ccx/__init__.py
++usr/share/freecad/Mod/Fem/femtest/testfiles/ccx/spine_mesh.py
++usr/share/freecad/Mod/Fem/femtest/testfiles/ccx/Flow1D_mesh.py
++usr/share/freecad/Mod/Fem/femtest/testfiles/ccx/cube_mesh.py
++usr/share/freecad/Mod/Fem/femtest/testfiles/elmer/__init__.py
++usr/share/freecad/Mod/Fem/femsolver/settings.py
++usr/share/freecad/Mod/Fem/femsolver/equationbase.py
++usr/share/freecad/Mod/Fem/femsolver/task.py
++usr/share/freecad/Mod/Fem/femsolver/reportdialog.py
++usr/share/freecad/Mod/Fem/femsolver/report.py
++usr/share/freecad/Mod/Fem/femsolver/signal.py
++usr/share/freecad/Mod/Fem/femsolver/__init__.py
++usr/share/freecad/Mod/Fem/femsolver/solverbase.py
++usr/share/freecad/Mod/Fem/femsolver/writerbase.py
++usr/share/freecad/Mod/Fem/femsolver/run.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/__init__.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/solver.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/writer.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/tasks.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/sifio.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/equations/__init__.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/equations/flow.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/equations/elasticity.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/equations/heat.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/equations/linear.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/equations/nonlinear.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/equations/fluxsolver.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/equations/equation.py
++usr/share/freecad/Mod/Fem/femsolver/elmer/equations/electrostatic.py
++usr/share/freecad/Mod/Fem/femsolver/calculix/__init__.py
++usr/share/freecad/Mod/Fem/femsolver/calculix/solver.py
++usr/share/freecad/Mod/Fem/femsolver/calculix/writer.py
++usr/share/freecad/Mod/Fem/femsolver/calculix/tasks.py
++usr/share/freecad/Mod/Fem/femsolver/fenics/__init__.py
++usr/share/freecad/Mod/Fem/femsolver/fenics/fenics_tools.py
++usr/share/freecad/Mod/Fem/femsolver/z88/__init__.py
++usr/share/freecad/Mod/Fem/femsolver/z88/solver.py
++usr/share/freecad/Mod/Fem/femsolver/z88/writer.py
++usr/share/freecad/Mod/Fem/femsolver/z88/tasks.py
++usr/share/freecad/Mod/Fem/Resources/ui/ResultShow.ui
++usr/share/freecad/Mod/Fem/Resources/ui/ElectrostaticPotential.ui
++usr/share/freecad/Mod/Fem/Resources/ui/ElementGeometry2D.ui
++usr/share/freecad/Mod/Fem/Resources/ui/FlowVelocity.ui
++usr/share/freecad/Mod/Fem/Resources/ui/Material.ui
++usr/share/freecad/Mod/Fem/Resources/ui/SolverCalculix.ui
++usr/share/freecad/Mod/Fem/Resources/ui/MeshGroup.ui
++usr/share/freecad/Mod/Fem/Resources/ui/MeshBoundaryLayer.ui
++usr/share/freecad/Mod/Fem/Resources/ui/MeshGroupXDMFExport.ui
++usr/share/freecad/Mod/Fem/Resources/ui/ElementRotation1D.ui
++usr/share/freecad/Mod/Fem/Resources/ui/MeshGmsh.ui
++usr/share/freecad/Mod/Fem/Resources/ui/MeshRegion.ui
++usr/share/freecad/Mod/Fem/Resources/ui/InitialFlowVelocity.ui
++usr/share/freecad/Mod/Fem/Resources/ui/ElementFluid1D.ui
++usr/share/freecad/Mod/Fem/Resources/ui/ElementGeometry1D.ui
++usr/share/freecad/Mod/Fem/femmesh/gmshtools.py
++usr/share/freecad/Mod/Fem/femmesh/__init__.py
++usr/share/freecad/Mod/Fem/femmesh/femmesh2mesh.py
++usr/share/freecad/Mod/Fem/femmesh/meshtools.py
++usr/share/freecad/Mod/Measure/Init.py
++usr/share/freecad/Mod/Points/Init.py
++usr/share/freecad/Mod/Points/InitGui.py
++usr/share/freecad/Mod/Complete/Init.py
++usr/share/freecad/Mod/Complete/InitGui.py
++usr/share/freecad/Mod/Part/JoinFeatures.py
++usr/share/freecad/Mod/Part/TestPartGui.py
++usr/share/freecad/Mod/Part/MakeBottle.py
++usr/share/freecad/Mod/Part/Init.py
++usr/share/freecad/Mod/Part/InitGui.py
++usr/share/freecad/Mod/Part/TestPartApp.py
++usr/share/freecad/Mod/Part/CompoundTools/CompoundFilter.py
++usr/share/freecad/Mod/Part/CompoundTools/__init__.py
++usr/share/freecad/Mod/Part/CompoundTools/_CommandCompoundFilter.py
++usr/share/freecad/Mod/Part/AttachmentEditor/__init__.py
++usr/share/freecad/Mod/Part/AttachmentEditor/TaskAttachmentEditor.py
++usr/share/freecad/Mod/Part/AttachmentEditor/TaskAttachmentEditor.ui
++usr/share/freecad/Mod/Part/AttachmentEditor/FrozenClass.py
++usr/share/freecad/Mod/Part/AttachmentEditor/Commands.py
++usr/share/freecad/Mod/Part/BOPTools/JoinFeatures.py
++usr/share/freecad/Mod/Part/BOPTools/Utils.py
++usr/share/freecad/Mod/Part/BOPTools/JoinAPI.py
++usr/share/freecad/Mod/Part/BOPTools/__init__.py
++usr/share/freecad/Mod/Part/BOPTools/SplitAPI.py
++usr/share/freecad/Mod/Part/BOPTools/ShapeMerge.py
++usr/share/freecad/Mod/Part/BOPTools/GeneralFuseResult.py
++usr/share/freecad/Mod/Part/BOPTools/SplitFeatures.py
++usr/share/freecad/Ext/PySide/__init__.py
++usr/share/freecad/Ext/PySide/QtGui.py
++usr/share/freecad/Ext/PySide/QtSvg.py
++usr/share/freecad/Ext/PySide/QtCore.py
++usr/share/freecad/Mod/Start/Init.py
++usr/share/freecad/Mod/Start/InitGui.py
++usr/share/freecad/Mod/Start/StartPage/__init__.py
++# usr/share/freecad/Mod/Start/StartPage/LoadMRU0.py
++# usr/share/freecad/Mod/Start/StartPage/LoadSchenkel.py
++# usr/share/freecad/Mod/Start/StartPage/LoadFemExample3DNewSolver.py
++# usr/share/freecad/Mod/Start/StartPage/LoadFemExample3D.py
++# usr/share/freecad/Mod/Start/StartPage/ArchDesign.py
++# usr/share/freecad/Mod/Start/StartPage/Ship.py
++# usr/share/freecad/Mod/Start/StartPage/LoadMRU2.py
++# usr/share/freecad/Mod/Start/StartPage/LoadDrawingExample.py
++# usr/share/freecad/Mod/Start/StartPage/LoadPartDesignExample.py
++# usr/share/freecad/Mod/Start/StartPage/LoadRobotExample.py
++# usr/share/freecad/Mod/Start/StartPage/LoadMRU3.py
++# usr/share/freecad/Mod/Start/StartPage/LoadFemExample2D.py
++# usr/share/freecad/Mod/Start/StartPage/LoadArchExample.py
++# usr/share/freecad/Mod/Start/StartPage/LoadMRU1.py
++usr/share/freecad/Mod/Start/StartPage/TranslationTexts.py
++usr/share/freecad/Mod/Start/StartPage/EnableDownload.py
++# usr/share/freecad/Mod/Start/StartPage/DefaultWorkbench.py
++# usr/share/freecad/Mod/Start/StartPage/PartDesign.py
++# usr/share/freecad/Mod/Start/StartPage/Mesh.py
++usr/share/freecad/Mod/Start/StartPage/StartPage.py
++usr/share/freecad/Mod/Web/Init.py
++usr/share/freecad/Mod/Web/InitGui.py
++usr/share/freecad/Mod/Show/Containers.py
++usr/share/freecad/Mod/Start/StartPage/LoadMRU.py
++usr/share/freecad/Mod/Start/StartPage/LoadCustom.py
++usr/share/freecad/Mod/Start/StartPage/LoadExample.py
++usr/share/freecad/Mod/Start/StartPage/LoadNew.py
++usr/share/freecad/Mod/Path/PathTests/TestPathOpTools.py
++usr/share/freecad/Mod/Path/PathTests/TestPathDeburr.py
++usr/share/freecad/Mod/Path/PathScripts/PathAdaptive.py
++usr/share/freecad/Mod/Path/PathScripts/PathToolEdit.py
++usr/share/freecad/Mod/Path/PathScripts/PathGuiInit.py
++usr/share/freecad/Mod/Path/PathScripts/PathEngraveBase.py
++usr/share/freecad/Mod/Path/PathScripts/PathSetupSheetOpPrototypeGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathAdaptiveGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathDeburr.py
++usr/share/freecad/Mod/Path/PathScripts/PathDeburrGui.py
++usr/share/freecad/Mod/Path/PathScripts/PathJobDlg.py
++usr/share/freecad/Mod/Path/PathScripts/PathDressupAxisMap.py
++usr/share/freecad/Mod/Path/PathScripts/PathOpTools.py
++usr/share/freecad/Mod/Path/PathScripts/PathSetupSheetOpPrototype.py
++usr/share/freecad/Mod/Path/PathScripts/PathSetupSheetGui.py
++usr/share/freecad/Mod/Path/PathScripts/post/grbl_G81_post.py
++usr/share/freecad/Mod/Arch/ArchReference.py
++usr/share/freecad/Mod/Test/TestPythonSyntax.py
++usr/share/freecad/Mod/Arch/ArchBuildingPart.py
++usr/share/freecad/Mod/AddonManager/addonmanager_utilities.py
++usr/share/freecad/Mod/AddonManager/addonmanager_macro.py
++usr/share/freecad/Mod/Draft/getSVG.py
++usr/share/freecad/Mod/Image/ImageTools/_CommandImageScaling.py
++usr/share/freecad/Mod/Image/ImageTools/__init__.py
++usr/share/freecad/Mod/Web/TestWebGui.py
++usr/share/freecad/Mod/MeshPart/MeshFlatteningCommand.py
++usr/share/freecad/Mod/Fem/femtest/testobject.py
++usr/share/freecad/Mod/Fem/femtest/testresult.py
++usr/share/freecad/Mod/Fem/femtest/utilstest.py
++usr/share/freecad/Mod/Part/CompoundTools/Explode.py
++usr/share/freecad/Mod/Part/CompoundTools/_CommandExplodeCompound.py
--- /dev/null
--- /dev/null
++usr/share/freecad/Mod usr/lib/freecad/Mod
++usr/share/freecad/Ext usr/lib/freecad/Ext
--- /dev/null
--- /dev/null
++.\" Hey, EMACS: -*- nroff -*-
++.\" First parameter, NAME, should be all caps
++.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
++.\" other parameters are allowed: see man(7), man(1)
++.TH FREECAD 1 "July 25, 2007" freecad "Linux User's Manual"
++.\" Please adjust this date whenever revising the manpage.
++.\"
++.\" Some roff macros, for reference:
++.\" .nh disable hyphenation
++.\" .hy enable hyphenation
++.\" .ad l left justify
++.\" .ad b justify to both left and right margins
++.\" .nf disable filling
++.\" .fi enable filling
++.\" .br insert line break
++.\" .sp <n> insert n+1 empty lines
++.\" for manpage-specific macros, see man(7)
++.SH NAME
++freecad \- An extensible Open Source CAx program for Unix/X11
++.SH SYNOPSIS
++.B freecad
++.RI [ options ] " files"
++.br
++.B freecadcmd
++.RI [ options ] " files"
++.SH DESCRIPTION
++.B FreeCAD
++is an Open Source CAx RAD based on OpenCasCade, Qt and Python. It features
++some key concepts like macro recording, workbenches, ability to run as a
++server and dynamically loadable application extensions and it is designed
++to be platform independent.
++.\" TeX users may be more comfortable with the \fB<whatever>\fP and
++.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
++.\" respectively.
++.SH USAGE
++\fBfreecad\fR starts with a GUI while \fBfreecadcmd\fR is only a pure command line version that starts a Python interpreter.
++.SH OPTIONS
++These programs follow the usual GNU command line syntax, with long
++options starting with two dashes (`-').
++A summary of the options supported by \fBfreecad\fR is included below.
++.SS "Generic options"
++.TP
++\fB\-h, \-\-help\fR
++Show summary of options.
++.TP
++\fB\-v, \-\-version\fR
++Show version of program.
++.TP
++\fB\-c, \-\-console\fR
++Start in console mode.
++.TP
++\fB\-\-response\-file\fR \fIarg\fR
++Can be specified with '@name', too.
++
++.SS "Configuration"
++.TP
++\fB\-l, \-\-write\-log\fR
++Write a log file.
++.TP
++\fB\-t, \-\-run\-test\fR \fIarg\fR
++Test level.
++.TP
++\fB\-M, \-\-module\-path\fR \fIarg\fR
++Additional module path.
++.TP
++\fB\-P, \-\-python\-path\fR \fIarg\fR
++Additional Python path.
++.SH SEE ALSO
++To get more information about \fBFreeCAD\fR, please visit \fIhttp://juergen\-riegel.net/FreeCAD/Docu/index.php/Main_Page\fR
++.SH BUGS
++To report a bug, please visit \fIhttp://free-cad.sf.net/\fR
++.SH AUTHOR
++This manual page was written by Werner Mayer.
--- /dev/null
--- /dev/null
++[Desktop Entry]
++Version=1.0
++Name=FreeCAD
++Name[de]=FreeCAD
++Comment=Feature based Parametric Modeler
++Comment[de]=Feature-basierter parametrischer Modellierer
++GenericName=CAD Application
++GenericName[de]=CAD-Anwendung
++Exec=/usr/bin/freecad %F
++Path=/usr/lib/freecad
++Terminal=false
++Type=Application
++Icon=freecad
++Categories=Graphics;Science;Engineering
++StartupNotify=true
++GenericName[de_DE]=Feature-basierter parametrischer Modellierer
++Comment[de_DE]=Feature-basierter parametrischer Modellierer
++MimeType=application/x-extension-fcstd
--- /dev/null
--- /dev/null
++src/Mod/Ship/resources/examples/*
--- /dev/null
--- /dev/null
++# FreeCAD is transitioning to a virtual package
++package-relation-with-self
--- /dev/null
--- /dev/null
++<?xml version="1.0" encoding="UTF-8"?>
++<mime-info xmlns='http://www.freedesktop.org/standards/shared-mime-info'>
++ <mime-type type="application/x-extension-fcstd">
++ <sub-class-of type="application/zip"/>
++ <comment>FreeCAD document files</comment>
++ <glob pattern="*.fcstd"/>
++ </mime-type>
++</mime-info>
--- /dev/null
--- /dev/null
++usr/lib/freecad-python2/lib/*.so
--- /dev/null
--- /dev/null
++# False positives, hardening=+all is used
++hardening-no-fortify-functions
++hardening-no-bindnow
++
++# False positive for pcre3
++embedded-library
--- /dev/null
--- /dev/null
++usr/lib/freecad-python3/lib/*.so
--- /dev/null
--- /dev/null
++# False positive for pcre3
++embedded-library
--- /dev/null
--- /dev/null
++Bug-Debian: https://bugs.debian.org/623560
++Author: Anton Gladky <gladky.anton@gmail.com>
++Last-Update: 2011-09-24
++Description: Disable memory-check in SMDS because sysinfo.h is not working
++ on BSD-systems and causes FTBFS. It is better to disable it only on
++ BSD-platforms.
++ Or use http://code.google.com/p/sysinfo-bsd/source/browse/sysinfo.c
++ for them.
++--- a/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp
+++++ b/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp
++@@ -56,13 +56,6 @@
++ #include <iterator>
++ using namespace std;
++
++-#ifndef WIN32
++-#if !(defined(__MACH__) && defined(__APPLE__))
++-#include <sys/sysinfo.h>
++-#endif
++-#include <sys/wait.h>
++-#endif
++-
++ // number of added entities to check memory after
++ #define CHECKMEMORY_INTERVAL 100000
++
++@@ -80,56 +73,7 @@
++
++ int SMDS_Mesh::CheckMemory(const bool doNotRaise)
++ {
++-#if 0
++-#if (defined(__MACH__) && defined(__APPLE__))
++- return 1000;
++-#else
++-#ifndef WIN32
++- struct sysinfo si;
++- int err = sysinfo( &si );
++- if ( err )
++- return -1;
++-
++- const unsigned long Mbyte = 1024 * 1024;
++-
++- static int limit = -1;
++- if ( limit < 0 ) {
++- int status = system("SMDS_MemoryLimit"); // it returns lower limit of free RAM
++- if (status >= 0 ) {
++- limit = WEXITSTATUS(status);
++- }
++- else {
++- double factor = ( si.totalswap == 0 ) ? 0.1 : 0.2;
++- limit = int(( factor * si.totalram * si.mem_unit ) / Mbyte );
++- }
++- if ( limit < 20 )
++- limit = 20;
++- else
++- limit = int ( limit * 1.5 );
++- MESSAGE ( "SMDS_Mesh::CheckMemory() memory limit = " << limit << " MB" );
++- }
++-
++- // compute separately to avoid overflow
++- int freeMb =
++- ( si.freeram * si.mem_unit ) / Mbyte +
++- ( si.freeswap * si.mem_unit ) / Mbyte;
++- //cout << "freeMb = " << freeMb << " limit = " << limit << endl;
++-
++- if ( freeMb > limit )
++- return freeMb - limit;
++-
++- if ( doNotRaise )
++- return 0;
++-
++- MESSAGE ("SMDS_Mesh::CheckMemory() throws as free memory too low: " << freeMb <<" MB" );
++- throw std::bad_alloc();
++-#else
++- return -1;
++-#endif
++-#endif
++-#else
++- return 1000;
++-#endif
+++ return 1000;
++ }
++
++ ///////////////////////////////////////////////////////////////////////////////
--- /dev/null
--- /dev/null
++Description: Do not include binary examples excluded via d/copyright
++Author: Anton Gladky <gladk@debian.org>
++Last-Update: 2018-06-10
++
++--- a/data/CMakeLists.txt
+++++ b/data/CMakeLists.txt
++@@ -1,9 +0,0 @@
++-add_subdirectory(examples)
++-
++-INSTALL(
++- FILES
++- License.txt
++- DESTINATION
++- ${CMAKE_INSTALL_DATADIR}
++-)
++-
++--- a/CMakeLists.txt
+++++ b/CMakeLists.txt
++@@ -1180,7 +1180,6 @@
++ # "(${CMAKE_SOURCE_DIR}). Please choose another build directory!")
++ #elseif()
++ add_subdirectory(src)
++-add_subdirectory(data)
++ #endif()
++
++ # ================================================================================
--- /dev/null
--- /dev/null
++Description: exclude ply from build-sources, use packaged version
++Author: Anton Gladky <gladk@debian.org>, Sebastian Hoogen <sebastian@hoogen.de>
++Last-Update: 2013-09-25
++
++--- a/src/Mod/OpenSCAD/CMakeLists.txt
+++++ b/src/Mod/OpenSCAD/CMakeLists.txt
++@@ -26,7 +26,7 @@
++ )
++ SOURCE_GROUP("ply" FILES ${ply_SRCS})
++
++-set(all_files ${OpenSCAD_SRCS} ${ply_SRCS})
+++set(all_files ${OpenSCAD_SRCS} )
++
++ SET(OpenSCADGuiIcon_SVG
++ Resources/icons/OpenSCADWorkbench.svg
++@@ -49,12 +49,6 @@
++
++ INSTALL(
++ FILES
++- ${ply_SRCS}
++- DESTINATION
++- Mod/OpenSCAD/ply
++-)
++-INSTALL(
++- FILES
++ ${OpenSCAD_SRCS}
++ ${OpenSCAD_QRC_SRCS}
++ DESTINATION
--- /dev/null
--- /dev/null
++Description: Don't include extra license file in package
++Author: Kurt Kremitzki <kkremitzki@gmail.com>
++Last-Update: 2018-06-13
++
++--- a/src/Mod/Idf/CMakeLists.txt
+++++ b/src/Mod/Idf/CMakeLists.txt
++@@ -6,7 +6,7 @@
++ SOURCE_GROUP("" FILES ${Idf_SRCS})
++
++ SET(IdfLibs_SRCS
++- Idflibs/License.txt
+++ #Idflibs/License.txt
++ Idflibs/0603_SMD.stp
++ Idflibs/0805_SMD.stp
++ Idflibs/1206_SMD.stp
--- /dev/null
--- /dev/null
++Description: Fix Start WB checking nonexistent examples path
++Author: Kurt Kremitzki <kurt@kwk.systems>
++Last-Updated: 2019-03-02
++
++--- a/src/Mod/Start/StartPage/StartPage.py
+++++ b/src/Mod/Start/StartPage/StartPage.py
++@@ -332,9 +332,12 @@
++ if FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/Start").GetBool("ShowExamples",True):
++ SECTION_EXAMPLES = encode("<h2>"+TranslationTexts.T_EXAMPLES+"</h2>")
++ SECTION_EXAMPLES += "<ul>"
++- for basename in os.listdir(FreeCAD.getResourceDir()+"examples"):
++- filename = FreeCAD.getResourceDir()+"examples"+os.sep+basename
++- SECTION_EXAMPLES += encode(buildCard(filename,method="LoadExample.py?filename="))
+++ examples_path = FreeCAD.getResourceDir()+"examples"
+++ if os.path.exists(examples_path):
+++ examples = os.listdir(examples_path)
+++ for basename in examples:
+++ filename = FreeCAD.getResourceDir()+"examples"+os.sep+basename
+++ SECTION_EXAMPLES += encode(buildCard(filename,method="LoadExample.py?filename="))
++ SECTION_EXAMPLES += "</ul>"
++ HTML = HTML.replace("SECTION_EXAMPLES",SECTION_EXAMPLES)
++
--- /dev/null
--- /dev/null
++Description: fix compilation on Armel due to coincident variables in
++ sys/ucontext.h (R2, R3, R4). Thanks to Paul Brook <paul@codesourcery.com>
++ http://lists.alioth.debian.org/pipermail/debian-science-maintainers/2011-October/009876.html
++Author: Anton Gladky <gladky.anton@gmail.com>
++Last-Update: 2011-10-27
++
++--- a/src/3rdParty/salomesmesh/inc/Rn.h
+++++ b/src/3rdParty/salomesmesh/inc/Rn.h
++@@ -31,7 +31,7 @@
++ #include <gp_Dir.hxx> //Dans OpenCascade
++
++ //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++-// BUT: Definir les espaces affines R R2 R3 R4 soit Rn pour n=1,2,3,4
+++// BUT: Definir les espaces affines R R_2 R_3 R_4 soit Rn pour n=1,2,3,4
++ //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ // AUTEUR : Frederic HECHT ANALYSE NUMERIQUE UPMC PARIS OCTOBRE 2000
++ // MODIFS : Alain PERRONNET ANALYSE NUMERIQUE UPMC PARIS NOVEMBRE 2000
++@@ -82,155 +82,155 @@
++ //==============
++ //typedef struct { short int x,y } XPoint; //en fait ce type est defini dans X11-Window
++ // #include <X11/Xlib.h>
++-//la classe R2
+++//la classe R_2
++ //============
++-class R2
+++class R_2
++ {
++- friend std::ostream& operator << (std::ostream& f, const R2 & P)
+++ friend std::ostream& operator << (std::ostream& f, const R_2 & P)
++ { f << P.x << ' ' << P.y ; return f; }
++- friend std::istream& operator >> (std::istream& f, R2 & P)
+++ friend std::istream& operator >> (std::istream& f, R_2 & P)
++ { f >> P.x >> P.y ; return f; }
++
++- friend std::ostream& operator << (std::ostream& f, const R2 * P)
+++ friend std::ostream& operator << (std::ostream& f, const R_2 * P)
++ { f << P->x << ' ' << P->y ; return f; }
++- friend std::istream& operator >> (std::istream& f, R2 * P)
+++ friend std::istream& operator >> (std::istream& f, R_2 * P)
++ { f >> P->x >> P->y ; return f; }
++
++ public:
++ R x,y; //les donnees
++
++- R2 () :x(0),y(0) {} //les constructeurs
++- R2 (R a,R b) :x(a),y(b) {}
++- R2 (R2 A,R2 B) :x(B.x-A.x),y(B.y-A.y) {} //vecteur defini par 2 points
++-
++- R2 operator+(R2 P) const {return R2(x+P.x,y+P.y);} // Q+P possible
++- R2 operator+=(R2 P) {x += P.x;y += P.y; return *this;}// Q+=P;
++- R2 operator-(R2 P) const {return R2(x-P.x,y-P.y);} // Q-P
++- R2 operator-=(R2 P) {x -= P.x;y -= P.y; return *this;} // Q-=P;
++- R2 operator-()const {return R2(-x,-y);} // -Q
++- R2 operator+()const {return *this;} // +Q
++- R operator,(R2 P)const {return x*P.x+y*P.y;} // produit scalaire (Q,P)
++- R operator^(R2 P)const {return x*P.y-y*P.x;} // produit vectoriel Q^P
++- R2 operator*(R c)const {return R2(x*c,y*c);} // produit a droite P*c
++- R2 operator*=(R c) {x *= c; y *= c; return *this;}
++- R2 operator/(R c)const {return R2(x/c,y/c);} // division par un reel
++- R2 operator/=(R c) {x /= c; y /= c; return *this;}
+++ R_2 () :x(0),y(0) {} //les constructeurs
+++ R_2 (R a,R b) :x(a),y(b) {}
+++ R_2 (R_2 A,R_2 B) :x(B.x-A.x),y(B.y-A.y) {} //vecteur defini par 2 points
+++
+++ R_2 operator+(R_2 P) const {return R_2(x+P.x,y+P.y);} // Q+P possible
+++ R_2 operator+=(R_2 P) {x += P.x;y += P.y; return *this;}// Q+=P;
+++ R_2 operator-(R_2 P) const {return R_2(x-P.x,y-P.y);} // Q-P
+++ R_2 operator-=(R_2 P) {x -= P.x;y -= P.y; return *this;} // Q-=P;
+++ R_2 operator-()const {return R_2(-x,-y);} // -Q
+++ R_2 operator+()const {return *this;} // +Q
+++ R operator,(R_2 P)const {return x*P.x+y*P.y;} // produit scalaire (Q,P)
+++ R operator^(R_2 P)const {return x*P.y-y*P.x;} // produit vectoriel Q^P
+++ R_2 operator*(R c)const {return R_2(x*c,y*c);} // produit a droite P*c
+++ R_2 operator*=(R c) {x *= c; y *= c; return *this;}
+++ R_2 operator/(R c)const {return R_2(x/c,y/c);} // division par un reel
+++ R_2 operator/=(R c) {x /= c; y /= c; return *this;}
++ R & operator[](int i) {return (&x)[i];} // la coordonnee i
++- R2 orthogonal() {return R2(-y,x);} //le vecteur orthogonal dans R2
++- friend R2 operator*(R c,R2 P) {return P*c;} // produit a gauche c*P
+++ R_2 orthogonal() {return R_2(-y,x);} //le vecteur orthogonal dans R_2
+++ friend R_2 operator*(R c,R_2 P) {return P*c;} // produit a gauche c*P
++ };
++
++
++-//la classe R3
+++//la classe R_3
++ //============
++-class R3
+++class R_3
++ {
++- friend std::ostream& operator << (std::ostream& f, const R3 & P)
+++ friend std::ostream& operator << (std::ostream& f, const R_3 & P)
++ { f << P.x << ' ' << P.y << ' ' << P.z ; return f; }
++- friend std::istream& operator >> (std::istream& f, R3 & P)
+++ friend std::istream& operator >> (std::istream& f, R_3 & P)
++ { f >> P.x >> P.y >> P.z ; return f; }
++
++- friend std::ostream& operator << (std::ostream& f, const R3 * P)
+++ friend std::ostream& operator << (std::ostream& f, const R_3 * P)
++ { f << P->x << ' ' << P->y << ' ' << P->z ; return f; }
++- friend std::istream& operator >> (std::istream& f, R3 * P)
+++ friend std::istream& operator >> (std::istream& f, R_3 * P)
++ { f >> P->x >> P->y >> P->z ; return f; }
++
++ public:
++ R x,y,z; //les 3 coordonnees
++
++- R3 () :x(0),y(0),z(0) {} //les constructeurs
++- R3 (R a,R b,R c):x(a),y(b),z(c) {} //Point ou Vecteur (a,b,c)
++- R3 (R3 A,R3 B):x(B.x-A.x),y(B.y-A.y),z(B.z-A.z) {} //Vecteur AB
++-
++- R3 (gp_Pnt P) : x(P.X()), y(P.Y()), z(P.Z()) {} //Point d'OpenCascade
++- R3 (gp_Vec V) : x(V.X()), y(V.Y()), z(V.Z()) {} //Vecteur d'OpenCascade
++- R3 (gp_Dir P) : x(P.X()), y(P.Y()), z(P.Z()) {} //Direction d'OpenCascade
++-
++- R3 operator+(R3 P)const {return R3(x+P.x,y+P.y,z+P.z);}
++- R3 operator+=(R3 P) {x += P.x; y += P.y; z += P.z; return *this;}
++- R3 operator-(R3 P)const {return R3(x-P.x,y-P.y,z-P.z);}
++- R3 operator-=(R3 P) {x -= P.x; y -= P.y; z -= P.z; return *this;}
++- R3 operator-()const {return R3(-x,-y,-z);}
++- R3 operator+()const {return *this;}
++- R operator,(R3 P)const {return x*P.x+y*P.y+z*P.z;} // produit scalaire
++- R3 operator^(R3 P)const {return R3(y*P.z-z*P.y ,P.x*z-x*P.z, x*P.y-y*P.x);} // produit vectoriel
++- R3 operator*(R c)const {return R3(x*c,y*c,z*c);}
++- R3 operator*=(R c) {x *= c; y *= c; z *= c; return *this;}
++- R3 operator/(R c)const {return R3(x/c,y/c,z/c);}
++- R3 operator/=(R c) {x /= c; y /= c; z /= c; return *this;}
+++ R_3 () :x(0),y(0),z(0) {} //les constructeurs
+++ R_3 (R a,R b,R c):x(a),y(b),z(c) {} //Point ou Vecteur (a,b,c)
+++ R_3 (R_3 A,R_3 B):x(B.x-A.x),y(B.y-A.y),z(B.z-A.z) {} //Vecteur AB
+++
+++ R_3 (gp_Pnt P) : x(P.X()), y(P.Y()), z(P.Z()) {} //Point d'OpenCascade
+++ R_3 (gp_Vec V) : x(V.X()), y(V.Y()), z(V.Z()) {} //Vecteur d'OpenCascade
+++ R_3 (gp_Dir P) : x(P.X()), y(P.Y()), z(P.Z()) {} //Direction d'OpenCascade
+++
+++ R_3 operator+(R_3 P)const {return R_3(x+P.x,y+P.y,z+P.z);}
+++ R_3 operator+=(R_3 P) {x += P.x; y += P.y; z += P.z; return *this;}
+++ R_3 operator-(R_3 P)const {return R_3(x-P.x,y-P.y,z-P.z);}
+++ R_3 operator-=(R_3 P) {x -= P.x; y -= P.y; z -= P.z; return *this;}
+++ R_3 operator-()const {return R_3(-x,-y,-z);}
+++ R_3 operator+()const {return *this;}
+++ R operator,(R_3 P)const {return x*P.x+y*P.y+z*P.z;} // produit scalaire
+++ R_3 operator^(R_3 P)const {return R_3(y*P.z-z*P.y ,P.x*z-x*P.z, x*P.y-y*P.x);} // produit vectoriel
+++ R_3 operator*(R c)const {return R_3(x*c,y*c,z*c);}
+++ R_3 operator*=(R c) {x *= c; y *= c; z *= c; return *this;}
+++ R_3 operator/(R c)const {return R_3(x/c,y/c,z/c);}
+++ R_3 operator/=(R c) {x /= c; y /= c; z /= c; return *this;}
++ R & operator[](int i) {return (&x)[i];}
++- friend R3 operator*(R c,R3 P) {return P*c;}
+++ friend R_3 operator*(R c,R_3 P) {return P*c;}
++
++- R3 operator=(gp_Pnt P) {return R3(P.X(),P.Y(),P.Z());}
++- R3 operator=(gp_Dir P) {return R3(P.X(),P.Y(),P.Z());}
+++ R_3 operator=(gp_Pnt P) {return R_3(P.X(),P.Y(),P.Z());}
+++ R_3 operator=(gp_Dir P) {return R_3(P.X(),P.Y(),P.Z());}
++
++- friend gp_Pnt gp_pnt(R3 xyz) { return gp_Pnt(xyz.x,xyz.y,xyz.z); }
+++ friend gp_Pnt gp_pnt(R_3 xyz) { return gp_Pnt(xyz.x,xyz.y,xyz.z); }
++ //friend gp_Pnt operator=() { return gp_Pnt(x,y,z); }
++- friend gp_Dir gp_dir(R3 xyz) { return gp_Dir(xyz.x,xyz.y,xyz.z); }
+++ friend gp_Dir gp_dir(R_3 xyz) { return gp_Dir(xyz.x,xyz.y,xyz.z); }
++
++- bool DansPave( R3 & xyzMin, R3 & xyzMax )
+++ bool DansPave( R_3 & xyzMin, R_3 & xyzMax )
++ { return xyzMin.x<=x && x<=xyzMax.x &&
++ xyzMin.y<=y && y<=xyzMax.y &&
++ xyzMin.z<=z && z<=xyzMax.z; }
++ };
++
++-//la classe R4
+++//la classe R_4
++ //============
++-class R4: public R3
+++class R_4: public R_3
++ {
++- friend std::ostream& operator <<(std::ostream& f, const R4 & P )
+++ friend std::ostream& operator <<(std::ostream& f, const R_4 & P )
++ { f << P.x << ' ' << P.y << ' ' << P.z << ' ' << P.omega; return f; }
++- friend istream& operator >>(istream& f, R4 & P)
+++ friend istream& operator >>(istream& f, R_4 & P)
++ { f >> P.x >> P.y >> P.z >> P.omega ; return f; }
++
++- friend std::ostream& operator <<(std::ostream& f, const R4 * P )
+++ friend std::ostream& operator <<(std::ostream& f, const R_4 * P )
++ { f << P->x << ' ' << P->y << ' ' << P->z << ' ' << P->omega; return f; }
++- friend istream& operator >>(istream& f, R4 * P)
+++ friend istream& operator >>(istream& f, R_4 * P)
++ { f >> P->x >> P->y >> P->z >> P->omega ; return f; }
++
++ public:
++ R omega; //la donnee du poids supplementaire
++
++- R4 () :omega(1.0) {} //les constructeurs
++- R4 (R a,R b,R c,R d):R3(a,b,c),omega(d) {}
++- R4 (R4 A,R4 B) :R3(B.x-A.x,B.y-A.y,B.z-A.z),omega(B.omega-A.omega) {}
++-
++- R4 operator+(R4 P)const {return R4(x+P.x,y+P.y,z+P.z,omega+P.omega);}
++- R4 operator+=(R4 P) {x += P.x;y += P.y;z += P.z;omega += P.omega;return *this;}
++- R4 operator-(R4 P)const {return R4(x-P.x,y-P.y,z-P.z,omega-P.omega);}
++- R4 operator-=(R4 P) {x -= P.x;y -= P.y;z -= P.z;omega -= P.omega;return *this;}
++- R4 operator-()const {return R4(-x,-y,-z,-omega);}
++- R4 operator+()const {return *this;}
++- R operator,(R4 P)const {return x*P.x+y*P.y+z*P.z+omega*P.omega;} // produit scalaire
++- R4 operator*(R c)const {return R4(x*c,y*c,z*c,omega*c);}
++- R4 operator*=(R c) {x *= c; y *= c; z *= c; omega *= c; return *this;}
++- R4 operator/(R c)const {return R4(x/c,y/c,z/c,omega/c);}
++- R4 operator/=(R c) {x /= c; y /= c; z /= c; omega /= c; return *this;}
+++ R_4 () :omega(1.0) {} //les constructeurs
+++ R_4 (R a,R b,R c,R d):R_3(a,b,c),omega(d) {}
+++ R_4 (R_4 A,R_4 B) :R_3(B.x-A.x,B.y-A.y,B.z-A.z),omega(B.omega-A.omega) {}
+++
+++ R_4 operator+(R_4 P)const {return R_4(x+P.x,y+P.y,z+P.z,omega+P.omega);}
+++ R_4 operator+=(R_4 P) {x += P.x;y += P.y;z += P.z;omega += P.omega;return *this;}
+++ R_4 operator-(R_4 P)const {return R_4(x-P.x,y-P.y,z-P.z,omega-P.omega);}
+++ R_4 operator-=(R_4 P) {x -= P.x;y -= P.y;z -= P.z;omega -= P.omega;return *this;}
+++ R_4 operator-()const {return R_4(-x,-y,-z,-omega);}
+++ R_4 operator+()const {return *this;}
+++ R operator,(R_4 P)const {return x*P.x+y*P.y+z*P.z+omega*P.omega;} // produit scalaire
+++ R_4 operator*(R c)const {return R_4(x*c,y*c,z*c,omega*c);}
+++ R_4 operator*=(R c) {x *= c; y *= c; z *= c; omega *= c; return *this;}
+++ R_4 operator/(R c)const {return R_4(x/c,y/c,z/c,omega/c);}
+++ R_4 operator/=(R c) {x /= c; y /= c; z /= c; omega /= c; return *this;}
++ R & operator[](int i) {return (&x)[i];}
++- friend R4 operator*(R c,R4 P) {return P*c;}
+++ friend R_4 operator*(R c,R_4 P) {return P*c;}
++ };
++
++ //quelques fonctions supplementaires sur ces classes
++ //==================================================
++-inline R Aire2d(const R2 A,const R2 B,const R2 C){return (B-A)^(C-A);}
++-inline R Angle2d(R2 P){ return atan2(P.y,P.x);}
+++inline R Aire2d(const R_2 A,const R_2 B,const R_2 C){return (B-A)^(C-A);}
+++inline R Angle2d(R_2 P){ return atan2(P.y,P.x);}
++
++-inline R Norme2_2(const R2 & A){ return (A,A);}
++-inline R Norme2(const R2 & A){ return sqrt((A,A));}
++-inline R NormeInfinie(const R2 & A){return Max(Abs(A.x),Abs(A.y));}
++-
++-inline R Norme2_2(const R3 & A){ return (A,A);}
++-inline R Norme2(const R3 & A){ return sqrt((A,A));}
++-inline R NormeInfinie(const R3 & A){return Max(Abs(A.x),Abs(A.y),Abs(A.z));}
++-
++-inline R Norme2_2(const R4 & A){ return (A,A);}
++-inline R Norme2(const R4 & A){ return sqrt((A,A));}
++-inline R NormeInfinie(const R4 & A){return Max(Abs(A.x),Abs(A.y),Abs(A.z),Abs(A.omega));}
++-
++-inline R2 XY(R3 P) {return R2(P.x, P.y);} //restriction a R2 d'un R3 par perte de z
++-inline R3 Min(R3 P, R3 Q)
++-{return R3(P.x<Q.x ? P.x : Q.x, P.y<Q.y ? P.y : Q.y, P.z<Q.z ? P.z : Q.z);} //Pt de xyz Min
++-inline R3 Max(R3 P, R3 Q)
++-{return R3(P.x>Q.x ? P.x : Q.x, P.y>Q.y ? P.y : Q.y, P.z>Q.z ? P.z : Q.z);} //Pt de xyz Max
+++inline R Norme2_2(const R_2 & A){ return (A,A);}
+++inline R Norme2(const R_2 & A){ return sqrt((A,A));}
+++inline R NormeInfinie(const R_2 & A){return Max(Abs(A.x),Abs(A.y));}
+++
+++inline R Norme2_2(const R_3 & A){ return (A,A);}
+++inline R Norme2(const R_3 & A){ return sqrt((A,A));}
+++inline R NormeInfinie(const R_3 & A){return Max(Abs(A.x),Abs(A.y),Abs(A.z));}
+++
+++inline R Norme2_2(const R_4 & A){ return (A,A);}
+++inline R Norme2(const R_4 & A){ return sqrt((A,A));}
+++inline R NormeInfinie(const R_4 & A){return Max(Abs(A.x),Abs(A.y),Abs(A.z),Abs(A.omega));}
+++
+++inline R_2 XY(R_3 P) {return R_2(P.x, P.y);} //restriction a R_2 d'un R_3 par perte de z
+++inline R_3 Min(R_3 P, R_3 Q)
+++{return R_3(P.x<Q.x ? P.x : Q.x, P.y<Q.y ? P.y : Q.y, P.z<Q.z ? P.z : Q.z);} //Pt de xyz Min
+++inline R_3 Max(R_3 P, R_3 Q)
+++{return R_3(P.x>Q.x ? P.x : Q.x, P.y>Q.y ? P.y : Q.y, P.z>Q.z ? P.z : Q.z);} //Pt de xyz Max
++
++ #endif
++--- a/src/3rdParty/salomesmesh/inc/StdMeshers_MEFISTO_2D.hxx
+++++ b/src/3rdParty/salomesmesh/inc/StdMeshers_MEFISTO_2D.hxx
++@@ -64,7 +64,7 @@
++ typedef std::vector< StdMeshers_FaceSidePtr > TWireVector;
++
++ bool LoadPoints(TWireVector & wires,
++- R2* uvslf,
+++ R_2* uvslf,
++ std::vector< const SMDS_MeshNode*>& mefistoToDS,
++ double scalex, double scaley);
++
++@@ -73,7 +73,7 @@
++ double& scalex,
++ double& scaley);
++
++- void StoreResult (Z nbst, R2* uvst, Z nbt, Z* nust,
+++ void StoreResult (Z nbst, R_2* uvst, Z nbt, Z* nust,
++ std::vector< const SMDS_MeshNode*>& mefistoToDS,
++ double scalex, double scaley);
++
++--- a/src/3rdParty/salomesmesh/inc/aptrte.h
+++++ b/src/3rdParty/salomesmesh/inc/aptrte.h
++@@ -60,9 +60,9 @@
++
++ MEFISTO2D_EXPORT
++ void aptrte( Z nutysu, R aretmx,
++- Z nblf, Z *nudslf, R2 *uvslf,
++- Z nbpti, R2 *uvpti,
++- Z & nbst, R2 * & uvst, Z & nbt, Z * & nust,
+++ Z nblf, Z *nudslf, R_2 *uvslf,
+++ Z nbpti, R_2 *uvpti,
+++ Z & nbst, R_2 * & uvst, Z & nbt, Z * & nust,
++ Z & ierr );
++ //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ // but : appel de la triangulation par un arbre-4 recouvrant
++@@ -123,7 +123,7 @@
++ #define tesuex TESUEX
++ #define teamqt TEAMQT
++ #define nusotr NUSOTR
++- #define qutr2d QUTR2D
+++ #define qutr2d QUTR_2D
++ #define surtd2 SURTD2
++ #define qualitetrte QUALITETRTE
++
++@@ -160,7 +160,7 @@
++ __stdcall
++ #endif
++ #endif
++- qualitetrte( R3 *mnpxyd,
+++ qualitetrte( R_3 *mnpxyd,
++ Z & mosoar, Z & mxsoar, Z *mnsoar,
++ Z & moartr, Z & mxartr, Z *mnartr,
++ Z & nbtria, R & quamoy, R & quamin ); }
++@@ -301,7 +301,7 @@
++ __stdcall
++ #endif
++ #endif
++- teajte( Z & mxsomm, Z & nbsomm, R3 * mnpxyd, R3 * comxmi,
+++ teajte( Z & mxsomm, Z & nbsomm, R_3 * mnpxyd, R_3 * comxmi,
++ R & aretmx, Z & mxtree, Z * letree,
++ Z & ierr );
++ }
++@@ -313,8 +313,8 @@
++ __stdcall
++ #endif
++ #endif
++- tehote( Z & nutysu, Z & nbarpi, Z & mxsomm, Z & nbsomm, R3 * mnpxyd,
++- R3 * comxmi, R & aretmx,
+++ tehote( Z & nutysu, Z & nbarpi, Z & mxsomm, Z & nbsomm, R_3 * mnpxyd,
+++ R_3 * comxmi, R & aretmx,
++ Z * letree, Z & mxqueu, Z * mnqueu,
++ Z & ierr );
++ }
++@@ -328,7 +328,7 @@
++ __stdcall
++ #endif
++ #endif
++- tetrte( R3 * comxmi, R & aretmx, Z & nbarpi, Z & mxsomm, R3 * mnpxyd,
+++ tetrte( R_3 * comxmi, R & aretmx, Z & nbarpi, Z & mxsomm, R_3 * mnpxyd,
++ Z & mxqueu, Z * mnqueu, Z * mntree,
++ Z & mosoar, Z & mxsoar, Z & n1soar, Z * mnsoar,
++ Z & moartr, Z & mxartr, Z & n1artr, Z * mnartr, Z * mnarst,
++@@ -355,7 +355,7 @@
++ __stdcall
++ #endif
++ #endif
++- tedela( R3 * mnpxyd, Z * mnarst,
+++ tedela( R_3 * mnpxyd, Z * mnarst,
++ Z & mosoar, Z & mxsoar, Z & n1soar, Z * mnsoar, Z & na,
++ Z & moartr, Z & mxartr, Z & n1artr, Z * mnartr, Z & n );
++ }
++@@ -369,7 +369,7 @@
++ __stdcall
++ #endif
++ #endif
++- terefr( Z & nbarpi, R3 * mnpxyd,
+++ terefr( Z & nbarpi, R_3 * mnpxyd,
++ Z & mosoar, Z & mxsoar, Z & n1soar, Z * mnsoar,
++ Z & moartr, Z & mxartr, Z & n1artr, Z * mnartr, Z * mnarst,
++ Z & mxarcf, Z * mnarc1, Z * mnarc2,
++@@ -387,7 +387,7 @@
++ #endif
++ #endif
++ tesuex( Z & nblf, Z * nulftr,
++- Z & ndtri0, Z & nbsomm, R3 * mnpxyd, Z * mnslig,
+++ Z & ndtri0, Z & nbsomm, R_3 * mnpxyd, Z * mnslig,
++ Z & mosoar, Z & mxsoar, Z * mnsoar,
++ Z & moartr, Z & mxartr, Z & n1artr, Z * mnartr, Z * mnarst,
++ Z & nbtria, Z * mntrsu, Z & ierr );
++@@ -407,7 +407,7 @@
++ Z & mxarcf, Z * mntrcf, Z * mnstbo,
++ Z * n1arcf, Z * mnarcf, Z * mnarc1,
++ Z & nbarpi, Z & nbsomm, Z & mxsomm,
++- R3 * mnpxyd, Z * mnslig,
+++ R_3 * mnpxyd, Z * mnslig,
++ Z & ierr );
++ }
++ // amelioration de la qualite de la triangulation par
++@@ -434,7 +434,7 @@
++ __stdcall
++ #endif
++ #endif
++- qutr2d( R3 & p1, R3 & p2, R3 & p3, R & qualite );
+++ qutr2d( R_3 & p1, R_3 & p2, R_3 & p3, R & qualite );
++ }
++ //calculer la qualite d'un triangle de R2 de sommets p1, p2, p3
++
++@@ -445,7 +445,7 @@
++ __stdcall
++ #endif
++ #endif
++- surtd2( R3 & p1, R3 & p2, R3 & p3 );
+++ surtd2( R_3 & p1, R_3 & p2, R_3 & p3 );
++ }
++ //calcul de la surface d'un triangle defini par 3 points de r**2
++
++--- a/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp
+++++ b/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp
++@@ -88,9 +88,9 @@
++
++
++ void aptrte( Z nutysu, R aretmx,
++- Z nblf, Z * nudslf, R2 * uvslf,
++- Z nbpti, R2 * uvpti,
++- Z & nbst, R2 * & uvst,
+++ Z nblf, Z * nudslf, R_2 * uvslf,
+++ Z nbpti, R_2 * uvpti,
+++ Z & nbst, R_2 * & uvst,
++ Z & nbt, Z * & nust,
++ Z & ierr )
++ //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++@@ -142,11 +142,11 @@
++ //no st1, st2, st3, 0 (non quadrangle)
++
++ R d, tcpu=0;
++-// R3 direction=R3(0,0,0); //direction pour areteideale() inactive ici!
+++// R_3 direction=R_3(0,0,0); //direction pour areteideale() inactive ici!
++ Z nbarfr=nudslf[nblf]; //nombre total d'aretes des lignes fermees
++ Z mxtrou = Max( 1024, nblf ); //nombre maximal de trous dans la surface
++
++- R3 *mnpxyd=NULL;
+++ R_3 *mnpxyd=NULL;
++ Z *mnsoar=NULL, mosoar=7, mxsoar, n1soar; //le hachage des aretes
++ Z *mnartr=NULL, moartr=3, mxartr, n1artr; //le no des 3 aretes des triangles
++ Z *mntree=NULL, motree=9, mxtree; //L'arbre 4 de TE et nombre d'entiers par TE
++@@ -161,7 +161,7 @@
++ Z *mnarst=NULL;
++ Z *mnlftr=NULL;
++
++- R3 comxmi[2]; //coordonnees UV Min et Maximales
+++ R_3 comxmi[2]; //coordonnees UV Min et Maximales
++ R aremin, aremax; //longueur minimale et maximale des aretes
++ R airemx; //aire maximale souhaitee d'un triangle
++ R quamoy, quamin;
++@@ -191,7 +191,7 @@
++ NEWDEPART:
++ //mnpxyd( 3, mxsomm ) les coordonnees UV des sommets et la taille d'arete aux sommets
++ if( mnpxyd!=NULL ) delete [] mnpxyd;
++- mnpxyd = new R3[mxsomm];
+++ mnpxyd = new R_3[mxsomm];
++ if( mnpxyd==NULL ) goto ERREUR;
++
++ // le tableau mnsoar des aretes des triangles
++@@ -655,7 +655,7 @@
++ // generation du tableau uvst de la surface triangulee
++ // ---------------------------------------------------
++ if( uvst != NULL ) delete [] uvst;
++- uvst = new R2[nbst];
+++ uvst = new R_2[nbst];
++ if( uvst == NULL ) goto ERREUR;
++
++ nbst=-1;
++@@ -761,7 +761,7 @@
++ __stdcall
++ #endif
++ #endif
++- qualitetrte( R3 *mnpxyd,
+++ qualitetrte( R_3 *mnpxyd,
++ Z & mosoar, Z & mxsoar, Z *mnsoar,
++ Z & moartr, Z & mxartr, Z *mnartr,
++ Z & nbtria, R & quamoy, R & quamin )
++--- a/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_MEFISTO_2D.cpp
+++++ b/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_MEFISTO_2D.cpp
++@@ -234,12 +234,12 @@
++
++ Z nblf; //nombre de lignes fermees (enveloppe en tete)
++ Z *nudslf = NULL; //numero du dernier sommet de chaque ligne fermee
++- R2 *uvslf = NULL;
+++ R_2 *uvslf = NULL;
++ Z nbpti = 0; //nombre points internes futurs sommets de la triangulation
++- R2 *uvpti = NULL;
+++ R_2 *uvpti = NULL;
++
++ Z nbst;
++- R2 *uvst = NULL;
+++ R_2 *uvst = NULL;
++ Z nbt;
++ Z *nust = NULL;
++ Z ierr = 0;
++@@ -264,7 +264,7 @@
++ nudslf[iw++] = nbpnt;
++ }
++
++- uvslf = new R2[nudslf[nblf]];
+++ uvslf = new R_2[nudslf[nblf]];
++
++ double scalex, scaley;
++ ComputeScaleOnFace(aMesh, F, scalex, scaley);
++@@ -390,7 +390,7 @@
++ //purpose : prevent failure due to overlapped adjacent links
++ //=======================================================================
++
++-static bool fixOverlappedLinkUV( R2& uv0, const R2& uv1, const R2& uv2 )
+++static bool fixOverlappedLinkUV( R_2& uv0, const R_2& uv1, const R_2& uv2 )
++ {
++ gp_XY v1( uv0.x - uv1.x, uv0.y - uv1.y );
++ gp_XY v2( uv2.x - uv1.x, uv2.y - uv1.y );
++@@ -441,7 +441,7 @@
++ //purpose :
++ //=======================================================================
++
++-static bool fixCommonVertexUV (R2 & theUV,
+++static bool fixCommonVertexUV (R_2 & theUV,
++ const TopoDS_Vertex& theV,
++ const TopoDS_Face& theF,
++ const TopTools_IndexedDataMapOfShapeListOfShape & theVWMap,
++@@ -540,7 +540,7 @@
++ nextUV = uv;
++ }
++ }
++- R2 uv0, uv1, uv2;
+++ R_2 uv0, uv1, uv2;
++ uv0.x = thisUV.X(); uv0.y = thisUV.Y();
++ uv1.x = nextUV.X(); uv1.y = nextUV.Y();
++ uv2.x = thisUV.X(); uv2.y = thisUV.Y();
++@@ -574,7 +574,7 @@
++ //=============================================================================
++
++ bool StdMeshers_MEFISTO_2D::LoadPoints(TWireVector & wires,
++- R2 * uvslf,
+++ R_2 * uvslf,
++ vector<const SMDS_MeshNode*>& mefistoToDS,
++ double scalex,
++ double scaley)
++@@ -782,7 +782,7 @@
++ */
++ //=============================================================================
++
++-void StdMeshers_MEFISTO_2D::StoreResult(Z nbst, R2 * uvst, Z nbt, Z * nust,
+++void StdMeshers_MEFISTO_2D::StoreResult(Z nbst, R_2 * uvst, Z nbt, Z * nust,
++ vector< const SMDS_MeshNode*>&mefistoToDS,
++ double scalex, double scaley)
++ {
--- /dev/null
--- /dev/null
++Description: Fixes GCC8 FTBFS due to included copy of SMESH.
++Author: Kurt Kremitzki <kurt@kwk.systems>
++Last-Updated: 2018-08-10
++--- a/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx
+++++ b/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx
++@@ -216,8 +216,8 @@
++ // WARNING: this comparator makes impossible to store both nodes and elements in the same set
++ // because there are nodes and elements with the same ID. Use TIDTypeCompare for such containers.
++ struct TIDCompare {
++- bool operator () (const SMDS_MeshElement* e1, const SMDS_MeshElement* e2) const
++- { return e1->GetID() < e2->GetID(); }
+++ template<typename T> bool operator () (const T* e1, const T* e2) const
+++ { return static_cast<const SMDS_MeshElement*>(e1)->GetID() < static_cast<const SMDS_MeshElement*>(e2)->GetID(); }
++ };
++
++ #endif
--- /dev/null
--- /dev/null
++Description: Fix includes for Qt 5.11 build
++Author: Kurt Kremitzki <kurt@kwk.systems>
++Last-Updated: 2018-09-05
++
++--- a/src/Mod/Fem/Gui/TaskFemConstraintBearing.cpp
+++++ b/src/Mod/Fem/Gui/TaskFemConstraintBearing.cpp
++@@ -25,6 +25,7 @@
++
++ #ifndef _PreComp_
++ # include <sstream>
+++# include <QAction>
++ # include <QRegExp>
++ # include <QTextStream>
++ # include <QMessageBox>
++--- a/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp
+++++ b/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp
++@@ -31,6 +31,7 @@
++ # include <Geom_Line.hxx>
++ # include <Geom_Plane.hxx>
++ # include <Precision.hxx>
+++# include <QAction>
++ # include <QMessageBox>
++ # include <QRegExp>
++ # include <QTextStream>
++--- a/src/Mod/Fem/Gui/TaskFemConstraintDisplacement.cpp
+++++ b/src/Mod/Fem/Gui/TaskFemConstraintDisplacement.cpp
++@@ -31,6 +31,7 @@
++ # include <Geom_Line.hxx>
++ # include <Geom_Plane.hxx>
++ # include <Precision.hxx>
+++# include <QAction>
++ # include <QMessageBox>
++ # include <QRegExp>
++ # include <QTextStream>
++--- a/src/Mod/Fem/Gui/TaskFemConstraintFixed.cpp
+++++ b/src/Mod/Fem/Gui/TaskFemConstraintFixed.cpp
++@@ -28,6 +28,7 @@
++ # include <Geom_Line.hxx>
++ # include <Geom_Plane.hxx>
++ # include <Precision.hxx>
+++# include <QAction>
++ # include <QMessageBox>
++ # include <QRegExp>
++ # include <QTextStream>
++--- a/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.cpp
+++++ b/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.cpp
++@@ -26,6 +26,7 @@
++
++ #ifndef _PreComp_
++ # include <sstream>
+++# include <QAction>
++ # include <QRegExp>
++ # include <QTextStream>
++ # include <QMessageBox>
++--- a/src/Mod/Fem/Gui/TaskFemConstraintForce.cpp
+++++ b/src/Mod/Fem/Gui/TaskFemConstraintForce.cpp
++@@ -25,6 +25,7 @@
++
++ #ifndef _PreComp_
++ # include <sstream>
+++# include <QAction>
++ # include <QRegExp>
++ # include <QTextStream>
++ # include <QMessageBox>
++--- a/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp
+++++ b/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp
++@@ -31,6 +31,7 @@
++ # include <Geom_Line.hxx>
++ # include <Geom_Plane.hxx>
++ # include <Precision.hxx>
+++# include <QAction>
++ # include <QMessageBox>
++ # include <QRegExp>
++ # include <QTextStream>
++--- a/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.cpp
+++++ b/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.cpp
++@@ -27,6 +27,7 @@
++
++ #ifndef _PreComp_
++ # include <sstream>
+++# include <QAction>
++ # include <QRegExp>
++ # include <QTextStream>
++ # include <QMessageBox>
++--- a/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp
+++++ b/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp
++@@ -29,6 +29,7 @@
++ # include <Geom_Line.hxx>
++ # include <Geom_Plane.hxx>
++ # include <Precision.hxx>
+++# include <QAction>
++ # include <QMessageBox>
++ # include <QRegExp>
++ # include <QTextStream>
++--- a/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp
+++++ b/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp
++@@ -31,6 +31,7 @@
++ # include <Geom_Line.hxx>
++ # include <Geom_Plane.hxx>
++ # include <Precision.hxx>
+++# include <QAction>
++ # include <QMessageBox>
++ # include <QRegExp>
++ # include <QTextStream>
++--- a/src/Mod/Fem/Gui/TaskFemConstraintTransform.cpp
+++++ b/src/Mod/Fem/Gui/TaskFemConstraintTransform.cpp
++@@ -32,6 +32,7 @@
++ # include <Geom_Line.hxx>
++ # include <Geom_Plane.hxx>
++ # include <Precision.hxx>
+++# include <QAction>
++ # include <QMessageBox>
++ # include <QRegExp>
++ # include <QTextStream>
++--- a/src/Mod/MeshPart/Gui/Tessellation.cpp
+++++ b/src/Mod/MeshPart/Gui/Tessellation.cpp
++@@ -25,6 +25,7 @@
++ #ifndef _PreComp_\r
++ # include <TopExp_Explorer.hxx>\r
++ # include <QMessageBox>\r
+++# include <QButtonGroup>\r
++ #endif\r
++ \r
++ #include "Tessellation.h"\r
++--- a/src/Mod/Part/Gui/DlgSettingsGeneral.h
+++++ b/src/Mod/Part/Gui/DlgSettingsGeneral.h
++@@ -25,6 +25,7 @@
++ #define PARTGUI_DLGSETTINGSGENERAL_H\r
++ \r
++ #include <Gui/PropertyPage.h>\r
+++#include <QButtonGroup>\r
++ \r
++ class QButtonGroup;\r
++ \r
++--- a/src/Mod/PartDesign/Gui/TaskBooleanParameters.cpp
+++++ b/src/Mod/PartDesign/Gui/TaskBooleanParameters.cpp
++@@ -24,6 +24,7 @@
++ #include "PreCompiled.h"\r
++ \r
++ #ifndef _PreComp_\r
+++# include <QAction>\r
++ # include <QMessageBox>\r
++ #endif\r
++ \r
++--- a/src/Mod/PartDesign/Gui/TaskChamferParameters.h
+++++ b/src/Mod/PartDesign/Gui/TaskChamferParameters.h
++@@ -26,6 +26,7 @@
++ \r
++ #include "TaskDressUpParameters.h"\r
++ #include "ViewProviderChamfer.h"\r
+++#include <QAction>\r
++ \r
++ class Ui_TaskChamferParameters;\r
++ \r
++--- a/src/Mod/PartDesign/Gui/TaskDraftParameters.cpp
+++++ b/src/Mod/PartDesign/Gui/TaskDraftParameters.cpp
++@@ -24,6 +24,7 @@
++ #include "PreCompiled.h"\r
++ \r
++ #ifndef _PreComp_\r
+++# include <QAction>\r
++ # include <QMessageBox>\r
++ #endif\r
++ \r
++--- a/src/Mod/PartDesign/Gui/TaskFilletParameters.cpp
+++++ b/src/Mod/PartDesign/Gui/TaskFilletParameters.cpp
++@@ -24,6 +24,7 @@
++ #include "PreCompiled.h"\r
++ \r
++ #ifndef _PreComp_\r
+++#include <QAction>\r
++ #endif\r
++ \r
++ #include "ui_TaskFilletParameters.h"\r
++--- a/src/Mod/PartDesign/Gui/TaskLinearPatternParameters.cpp
+++++ b/src/Mod/PartDesign/Gui/TaskLinearPatternParameters.cpp
++@@ -24,6 +24,7 @@
++ #include "PreCompiled.h"\r
++ \r
++ #ifndef _PreComp_\r
+++# include <QAction>\r
++ # include <QMessageBox>\r
++ # include <QTimer>\r
++ #endif\r
++--- a/src/Mod/PartDesign/Gui/TaskMirroredParameters.cpp
+++++ b/src/Mod/PartDesign/Gui/TaskMirroredParameters.cpp
++@@ -24,6 +24,7 @@
++ #include "PreCompiled.h"\r
++ \r
++ #ifndef _PreComp_\r
+++# include <QAction>\r
++ # include <QMessageBox>\r
++ #endif\r
++ \r
++--- a/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.cpp
+++++ b/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.cpp
++@@ -24,6 +24,7 @@
++ #include "PreCompiled.h"\r
++ \r
++ #ifndef _PreComp_\r
+++# include <QAction>\r
++ # include <QMessageBox>\r
++ #endif\r
++ \r
++--- a/src/Mod/PartDesign/Gui/TaskPolarPatternParameters.cpp
+++++ b/src/Mod/PartDesign/Gui/TaskPolarPatternParameters.cpp
++@@ -24,6 +24,7 @@
++ #include "PreCompiled.h"\r
++ \r
++ #ifndef _PreComp_\r
+++# include <QAction>\r
++ # include <QMessageBox>\r
++ # include <QTimer>\r
++ #endif\r
++--- a/src/Mod/PartDesign/Gui/TaskScaledParameters.cpp
+++++ b/src/Mod/PartDesign/Gui/TaskScaledParameters.cpp
++@@ -24,6 +24,7 @@
++ #include "PreCompiled.h"\r
++ \r
++ #ifndef _PreComp_\r
+++# include <QAction>\r
++ # include <QMessageBox>\r
++ #endif\r
++ \r
++--- a/src/Mod/PartDesign/Gui/TaskThicknessParameters.cpp
+++++ b/src/Mod/PartDesign/Gui/TaskThicknessParameters.cpp
++@@ -24,6 +24,7 @@
++ #include "PreCompiled.h"\r
++ \r
++ #ifndef _PreComp_\r
+++#include <QAction>\r
++ #endif\r
++ \r
++ #include "ui_TaskThicknessParameters.h"\r
--- /dev/null
--- /dev/null
++Description: Remove documentation, which was shipped as binary
++Author: Anton Gladky <gladk@debian.org>
++Last-Update: 2015-08-27
++
++--- a/src/Doc/CMakeLists.txt
+++++ b/src/Doc/CMakeLists.txt
++@@ -5,28 +5,28 @@
++ \r
++ \r
++ if(BUILD_GUI)\r
++- FILE(GLOB QCH_FILES freecad.qch.part*)\r
++- list(SORT QCH_FILES)\r
++- set (DEST_FILE ${CMAKE_BINARY_DIR}/doc/freecad.qch)\r
++- foreach(SRC_FILE ${QCH_FILES})\r
++- if(${SRC_FILE} IS_NEWER_THAN ${DEST_FILE})\r
++- EXECUTE_PROCESS(COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_SOURCE_DIR}/src/Tools/catfiles.py\r
++- --outputfile=${DEST_FILE} ${QCH_FILES}\r
++- WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}\r
++- OUTPUT_STRIP_TRAILING_WHITESPACE)\r
++- break()\r
++- endif()\r
++- endforeach()\r
+++ #FILE(GLOB QCH_FILES freecad.qch.part*)\r
+++ #list(SORT QCH_FILES)\r
+++ #set (DEST_FILE ${CMAKE_BINARY_DIR}/doc/freecad.qch)\r
+++ #foreach(SRC_FILE ${QCH_FILES})\r
+++ #if(${SRC_FILE} IS_NEWER_THAN ${DEST_FILE})\r
+++ #EXECUTE_PROCESS(COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_SOURCE_DIR}/src/Tools/catfiles.py\r
+++ #--outputfile=${DEST_FILE} ${QCH_FILES}\r
+++ #WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}\r
+++ #OUTPUT_STRIP_TRAILING_WHITESPACE)\r
+++ #break()\r
+++ #endif()\r
+++ #endforeach()\r
++ \r
++- configure_file(freecad.qhc ${CMAKE_BINARY_DIR}/doc/freecad.qhc COPYONLY)\r
++- INSTALL(FILES\r
++- ${CMAKE_BINARY_DIR}/doc/freecad.qch\r
++- DESTINATION ${CMAKE_INSTALL_DOCDIR}\r
++- )\r
+++ #configure_file(freecad.qhc ${CMAKE_BINARY_DIR}/doc/freecad.qhc COPYONLY)\r
+++ #INSTALL(FILES\r
+++ #${CMAKE_BINARY_DIR}/doc/freecad.qch\r
+++ #DESTINATION ${CMAKE_INSTALL_DOCDIR}\r
+++ #)\r
++ endif(BUILD_GUI)\r
++ \r
++ INSTALL(FILES\r
++- freecad.qhc\r
+++ #freecad.qhc\r
++ ThirdPartyLibraries.html\r
++ DESTINATION ${CMAKE_INSTALL_DOCDIR}\r
++ )\r
--- /dev/null
--- /dev/null
++# fix_qt-5.11_build.patch
++fix-start-workbench.patch
++fix_gcc8_ftbfs.patch
++fix_armel_FTBFS.patch
++fix-cmake-extra-license.patch
++do_not_install_binary_examples.patch
++exclude_ply.patch
++disable_memory_check.patch
++remove_doc-files.patch
--- /dev/null
--- /dev/null
++#!/usr/bin/make -f
++%:
++ dh $@ --buildsystem=cmake --with python2,python3
++
++DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
++DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)
++export DEB_BUILD_MAINT_OPTIONS = hardening=+all,+bindnow
++
++extra_flags += \
++-DBUILD_QT5=ON \
++-DFREECAD_BUILD_DEBIAN=ON \
++-DCMAKE_CXX_FLAGS="-Wall -DHAVE_SWIG=1 -fpermissive $(shell dpkg-buildflags --get CXXFLAGS) $(shell dpkg-buildflags --get CPPFLAGS)" \
++-DCMAKE_C_FLAGS="-Wall -fpermissive $(shell dpkg-buildflags --get CFLAGS) $(shell dpkg-buildflags --get CPPFLAGS)" \
++-DCMAKE_SHARED_LINKER_FLAGS="$(shell dpkg-buildflags --get LDFLAGS)" \
++-DLIB_SUFFIX="" \
++-DCMAKE_BUILD_TYPE=RelWithDebInfo \
++-DCMAKE_INSTALL_DATADIR="/usr/share/freecad" \
++-DCMAKE_INSTALL_DOCDIR="/usr/share/doc/freecad-doc" \
++-DCMAKE_INSTALL_PREFIX="/usr/share/freecad"
++
++py2_flags = \
++-DPYTHON_CONFIG_SUFFIX="-python2.7.${DEB_HOST_MULTIARCH}" \
++-DCMAKE_INSTALL_LIBDIR="/usr/lib/freecad-python2/lib"
++
++py3_flags = \
++-DPYTHON_EXECUTABLE="/usr/bin/python3" \
++-DCMAKE_INSTALL_LIBDIR="/usr/lib/freecad-python3/lib"
++
++override_dh_auto_configure:
++ dh_auto_configure --builddirectory=debian/build-py2 -- \
++ $(extra_flags) \
++ $(py2_flags)
++ dh_auto_configure --builddirectory=debian/build-py3 -- \
++ $(extra_flags) \
++ $(py3_flags)
++
++override_dh_auto_build:
++ dh_auto_build --builddirectory=debian/build-py2
++ dh_auto_build --builddirectory=debian/build-py3
++
++override_dh_auto_test:
++ dh_auto_test --builddirectory=debian/build-py2
++ dh_auto_test --builddirectory=debian/build-py3
++
++override_dh_auto_install:
++ dh_auto_install --builddirectory=debian/build-py2
++ mv debian/tmp/usr/share/freecad/bin/FreeCADCmd \
++ debian/tmp/usr/share/freecad/bin/FreeCADCmd-Python2
++ mv debian/tmp/usr/share/freecad/bin/FreeCAD \
++ debian/tmp/usr/share/freecad/bin/FreeCAD-Python2
++ dh_auto_install --builddirectory=debian/build-py3
++ mv debian/tmp/usr/share/freecad/bin/FreeCADCmd \
++ debian/tmp/usr/share/freecad/bin/FreeCADCmd-Python3
++ mv debian/tmp/usr/share/freecad/bin/FreeCAD \
++ debian/tmp/usr/share/freecad/bin/FreeCAD-Python3
++
++override_dh_compress:
++ dh_compress -X.qch -X.qhc
++
++override_dh_installchangelogs:
++ dh_installchangelogs ChangeLog.txt
++
++override_dh_installexamples:
++
++override_dh_missing-arch:
++ dh_missing --list-missing
--- /dev/null
--- /dev/null
++#!/bin/bash
++
++# The script creates a tar.xz tarball from git-repository of freecad-project
++# ./get_orig_src.sh commitID - creates a tarball of specified commit
++# ./get_orig_src.sh - creates a tarball of the latest version
++# Packages, that needs to be installed to use the script:
++# atool, git-core
++
++set -e
++
++git clone git://free-cad.git.sourceforge.net/gitroot/free-cad/free-cad git_temp_packaging
++
++cd git_temp_packaging
++
++if [ $1 ]
++then
++ echo 'Checking out the revision ' $1
++ git checkout -b newvers $1
++else
++ echo 'Using the latest revision'
++fi
++
++GIT_CMT_COUNT=$(git rev-list HEAD | wc -l)
++
++DEB_VER=0.13.$GIT_CMT_COUNT-dfsg
++FOLDER_NAME=freecad-$DEB_VER
++TARBALL_NAME=freecad_$DEB_VER.orig.tar.xz
++
++echo $DEB_VER
++echo $FOLDER_NAME
++echo $TARBALL_NAME
++
++python src/Tools/SubWCRev.py
++
++cd ..
++
++rm -fr $FOLDER_NAME
++
++mv git_temp_packaging $FOLDER_NAME
++rm -rf $FOLDER_NAME/.git
++rm -rf $FOLDER_NAME/src/3rdParty/CxImage
++rm -rf $FOLDER_NAME/src/3rdParty/Pivy
++rm -rf $FOLDER_NAME/src/3rdParty/Pivy-0.5
++rm -rf $FOLDER_NAME/src/3rdParty/ANN/doc/ANNmanual.pdf
++rm -rf $FOLDER_NAME/src/Mod/Ship/simRun/theory/main.pdf
++rm -rf $FOLDER_NAME/src/Mod/Mod/Robot/Lib/Kuka/*.pdf
++rm -rf $FOLDER_NAME/src/Doc/TiddlySaver.jar
++rm -rf $FOLDER_NAME/data/examples/*.FCStd
++
++
++tar Jcvf $TARBALL_NAME $FOLDER_NAME
++
++rm -fr $FOLDER_NAME
--- /dev/null
--- /dev/null
++3.0 (quilt)
--- /dev/null
--- /dev/null
++# Lintian thinks uploader Adam Powell's name violates policy\r
++freecad source: uploader-address-missing "Adam C. Powell\r
++freecad source: uploader-not-full-name IV"\r
++\r
++# The following file is licensed under GPL\r
++# http://de.wikibooks.org/wiki/Datei:Gnome-edit-cut.svg\r
++freecad source: license-problem-cc-by-nc-sa src/Gui/Icons/edit-cut.svg\r
--- /dev/null
--- /dev/null
++Tests: freecadtest
++Depends: freecad
++Restrictions: allow-stderr
--- /dev/null
--- /dev/null
++#!/bin/sh
++# autopkgtest check
++# (C) 2014 Anton Gladky <gladk@debian.org>
++
++set -e
++
++WORKDIR=$(mktemp -d)
++trap "rm -rf $WORKDIR" 0 INT QUIT ABRT PIPE TERM
++cd $WORKDIR
++
++freecadcmd --console --run-test 0
++echo "run: OK"
--- /dev/null
--- /dev/null
++version=3
++opts=repacksuffix=+dfsg1,uversionmangle=s/(\d)[_\.\-\+]?((RC|rc|pre|dev|beta|alpha|b|a)\d*)$/$1~$2/,dversionmangle=s/\+(debian|dfsg|ds|deb)\d*$// \
++https://github.com/FreeCAD/FreeCAD/tags .*/(\d.*).*(?<!_pre)\.(?:tgz|tbz2|txz|tar\.(?:gz|bz2|xz))
projects / freecad.git / commitdiff