--- /dev/null
--- /dev/null
++freecad (0.18+dfsg1-1) unstable; urgency=low
++
++ FreeCAD is now available in Python 2 and Python 3 versions, with the
++ `freecad` metapackage defaulting to `freecad-python3`. If you want to use
++ the legacy Python 2 package, install `freecad-python2` and switch between
++ the versions using `sudo update-alternatives --config freecad`.
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sun, 31 Mar 2019 01:58:53 -0500
--- /dev/null
--- /dev/null
++freecad (0.20.2+dfsg1-4) unstable; urgency=medium
++
++ * Team upload.
++ * Apply work-around for crash when started with --single-instance,
++ e.g. using the .desktop file (Closes: #1029846)
++
++ -- Tobias Frost <tobi@debian.org> Sat, 04 Feb 2023 14:01:18 +0100
++
++freecad (0.20.2+dfsg1-3) unstable; urgency=medium
++
++ * [c522953] Remove redundant `freecadcmd --console` in autopkgtest
++ * [0bef48d] Add patch for numpy 1.24
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Tue, 10 Jan 2023 11:08:11 -0600
++
++freecad (0.20.2+dfsg1-2) unstable; urgency=medium
++
++ * [3bfb4a5] Add arch-specific Qt WebKit fallback
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Mon, 09 Jan 2023 19:15:33 -0600
++
++freecad (0.20.2+dfsg1-1) unstable; urgency=medium
++
++ [ Tobias Frost ]
++ * [7556687] Add several supported MIME types to the .desktop file.
++ (Closes: #993089)
++
++ [ Kurt Kremitzki ]
++ * [69cb156] Switch from Qt WebKit to WebEngine
++ * [bdc52cd] New upstream version 0.20.2+dfsg1 (Closes: #1028171)
++ * [1e3598e] Refresh patches
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Mon, 09 Jan 2023 17:00:02 -0600
++
++freecad (0.20.1+dfsg1-2) unstable; urgency=medium
++
++ * Team upload.
++ * autopkgtest: Disable test TestPathApp on s390x.
++
++ -- Tobias Frost <tobi@debian.org> Fri, 09 Sep 2022 17:01:54 +0200
++
++freecad (0.20.1+dfsg1-1) unstable; urgency=medium
++
++ * New upstream release.
++
++ -- Tobias Frost <tobi@debian.org> Fri, 26 Aug 2022 23:58:01 +0200
++
++freecad (0.20+dfsg1-6) unstable; urgency=medium
++
++ * Revert running freecad in the autopkgtest, this needs more work.
++
++ -- Tobias Frost <tobi@debian.org> Thu, 18 Aug 2022 21:30:34 +0200
++
++freecad (0.20+dfsg1-5) unstable; urgency=medium
++
++ * Team upload.
++ * Disable test femtest.app.test_solver_calculix.TestSolverCalculix, as
++ this test is currently broken on some archs. Closes: #1017598.
++ * Run freecad (gui executeable) test suite also in the autopkgtest,
++ in the hope that missing libraries will be caught too (see #1013881).
++
++ -- Tobias Frost <tobi@debian.org> Thu, 18 Aug 2022 12:38:22 +0200
++
++freecad (0.20+dfsg1-4) unstable; urgency=medium
++
++ * Team upload.
++ * Fix FTBFS on armel and armhf, GL_PROJECTION not declared in this scope
++ with patch fix-1014875-arm-FTBFS.patch (Closes: #1014875)
++
++ -- Tobias Frost <tobi@debian.org> Tue, 09 Aug 2022 18:37:51 +0200
++
++freecad (0.20+dfsg1-3) UNRELEASED; urgency=medium
++
++ * d/u/metadata: Added SciCrunch RRID:SCR_022535
++
++ -- Steffen Moeller <moeller@debian.org> Tue, 05 Jul 2022 21:17:32 +0200
++
++freecad (0.20+dfsg1-2) unstable; urgency=medium
++
++ * Team upload.
++ * More verbose description.
++
++ -- Steffen Moeller <moeller@debian.org> Tue, 05 Jul 2022 02:16:00 +0200
++
++freecad (0.20+dfsg1-1) unstable; urgency=medium
++
++ * Team upload.
++ * New upstream version. (Closes: #1007013)
++ * Removed surface_extended_patch.patch - already found upstream
++ * Removed remove_doc-files.patch - no longer applicable/needed
++ * Removed fix_vtk9.patch - addressed upstream
++ * Standards-Version: 4.6.1 (routine-update)
++ * Extended runtime dependencies on python Qt modules as instructed
++ upon execution of freecad.
++
++ -- Steffen Moeller <moeller@debian.org> Mon, 04 Jul 2022 15:29:38 +0200
++
++freecad (0.19.4+dfsg1-1) unstable; urgency=medium
++
++ * Team upload.
++
++ * New upstream version - a bug-fix release
++ Release notes: https://github.com/FreeCAD/FreeCAD/releases/tag/0.19.4
++ - Fixes CVE-2021-45844 (Closes: #1005747)
++ - Fixes CVE-2021-45845
++ * Added link-time optimization
++
++ -- Steffen Moeller <moeller@debian.org> Fri, 04 Mar 2022 16:01:45 +0100
++
++freecad (0.19.3+dfsg1-2) unstable; urgency=medium
++
++ * Team upload.
++
++ [ Håvard Flaget Aasen ]
++ * Move files from /usr/share/freecad/share/* to /usr/share/*
++ * Move appstream files from freecad-common to freecad, specifically
++ /usr/share/applications/*, /usr/share/metainfo/* and /usr/share/mime/*.
++ This will make sofware relying on appstream to install correct package.
++ (Closes: #981175)
++ * Don't install .xpm icon.
++ * Prefer upstream version of desktop and sharedmimeinfo files.
++ * Explicitly list folders to install in freecad-common.
++ * Add patch to include previous set option in desktop file.
++ Making freecad only run as single instance.
++
++ [ Tobias Frost ]
++ * Fix filename of SurfaceExtend icon (Closes: #992715)
++
++ -- Steffen Moeller <moeller@debian.org> Fri, 25 Feb 2022 14:04:59 +0100
++
++freecad (0.19.3+dfsg1-1) unstable; urgency=medium
++
++ * Team upload.
++
++ [ Tobias Frost ]
++ * Tighten dependencies on metapackage, so that the right version
++ of all packages will be pulled on update. (Closes: #980474)
++
++ [ Steffen Moeller ]
++ * Remove trailing whitespace in debian/copyright (routine-update)
++ * Add salsa-ci file (routine-update)
++ * watch file standard 4 (routine-update)
++ * patch/python3.8 adopted upstream
++ * improved d/rules clean target for repeated builds
++
++ -- Tobias Frost <tobi@debian.org> Fri, 22 Oct 2021 12:45:02 +0200
++
++freecad (0.19.2+dfsg1-3) unstable; urgency=medium
++
++ * Team upload.
++ * [6e8d7af] Compile against vtk9 instead of vtk7
++
++ -- Anton Gladky <gladk@debian.org> Sat, 25 Sep 2021 09:52:47 +0200
++
++freecad (0.19.2+dfsg1-2) unstable; urgency=medium
++
++ * [bc42245] Add patch for OpenCASCADE >= 7.5.2
++ * [acc44a0] Add Rules-Requires-Root: no
++ * [8a24737] Add DEP-3 headers to document OpenCASCADE 7.4.0 patch
++ * [cafc615] Update to Standards-Version 4.6.0 (no changes required)
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Mon, 06 Sep 2021 19:13:40 -0500
++
++freecad (0.19.2+dfsg1-1) unstable; urgency=medium
++
++ * [9a27ec0] New upstream version 0.19.2+dfsg1
++ * [cbf49b1] Refresh fix-s390x-test-fail-skip-load-old-file.patch
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Sat, 04 Sep 2021 15:44:21 -0500
++
++freecad (0.19.1+dfsg1-2) unstable; urgency=medium
++
++ * Team upload.
++ * [aed47c1] Fix whitespaces in previous commit from Christian Ehrhardt,
++ breaking python autopkgtests
++
++ -- Gianfranco Costamagna <locutusofborg@debian.org> Tue, 16 Mar 2021 17:55:02 +0100
++
++freecad (0.19.1+dfsg1-1) unstable; urgency=medium
++
++ [ Christian Ehrhardt ]
++ * [fbc90b2] skip self test open_de9b3fb438 on s390x as it goes OOM
++ (LP: #1918474)(Closes: #984952)
++
++ [ Kurt Kremitzki ]
++ * [3ae55a4] New upstream version 0.19.1+dfsg1
++ * [bc2242e] Drop fix-fem-crash.patch, included in 0.19.1
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Mon, 15 Mar 2021 21:00:32 -0500
++
++freecad (0.19+dfsg1-2) unstable; urgency=medium
++
++ * [e19be27] Add patch to fix crash in FEM Constraint::getDirection
++ (Closes: #983590)
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Sun, 28 Feb 2021 03:36:37 -0600
++
++freecad (0.19+dfsg1-1) unstable; urgency=medium
++
++ * [40577ea] New upstream version 0.19+dfsg1
++ * [f346346] Add python3-matplotlib build dependency
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Thu, 25 Feb 2021 11:53:32 -0600
++
++freecad (0.19~pre1+git20210207.a3fb41502b+dfsg-1) unstable; urgency=medium
++
++ * [fc00a73] New upstream version 0.19~pre1+git20210207.a3fb41502b+dfsg
++ * [b1f38b0] Refresh patches
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Sun, 07 Feb 2021 18:46:40 -0600
++
++freecad (0.19~pre1+git20210109.afd1470202+dfsg1-2) unstable; urgency=medium
++
++ * [bcad731] Add python3-yaml runtime dep
++ * [4f5dd12] Set FREECAD_USER_HOME for autopkgtest
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Wed, 20 Jan 2021 10:49:37 -0600
++
++freecad (0.19~pre1+git20210109.afd1470202+dfsg1-1) unstable; urgency=medium
++
++ * [1395c4c] Update freecad-common symlinks (Closes: #980292)
++ * [154c84e] New upstream version 0.19~pre1+git20210109.afd1470202+dfsg1
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Mon, 18 Jan 2021 12:48:25 -0600
++
++freecad (0.19~pre1+git20201221.3b449e1ce9+dfsg1-2) unstable; urgency=medium
++
++ * [2ce772e] Add Breaks+Replaces for libfreecad-python3-0.19 over 0.18
++ (Closes: #976430)
++ * [0046d46] Always only --list-missing
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Thu, 24 Dec 2020 06:54:50 -0600
++
++freecad (0.19~pre1+git20201221.3b449e1ce9+dfsg1-1) unstable; urgency=medium
++
++ * [921e9bc] New upstream version 0.19~pre1+git20201221.3b449e1ce9+dfsg1
++ * [ea5594a] Refresh python3.8.patch
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Mon, 21 Dec 2020 11:23:53 -0600
++
++freecad (0.19~pre1+git20201123.8d73c8f0+dfsg1-1) experimental; urgency=medium
++
++ * [ede52e5] New upstream version 0.19~pre1+git20201123.8d73c8f0+dfsg1
++ * [b8be794] Refresh patches
++ * [5b061b9] Update packaging for 0.19
++
++ -- Kurt Kremitzki <kkremitzki@debian.org> Sun, 29 Nov 2020 03:20:11 -0600
++
++freecad (0.18.4+dfsg2-6) unstable; urgency=medium
++
++ * Team upload.
++ * [63b9bcf] Fix compilation against boost and python3.9.
++ (Closes: #975267, #973285)
++ * [5773c7e] Use secure URI in Homepage field.
++ * [ffb3bbb] Set debhelper-compat version in Build-Depends.
++ * [15de038] Set upstream metadata fields: Repository, Repository-Browse.
++ * [afe02a4] Fix day-of-week for changelog entry 0.7.1031-1.
++ * [159b458] Update standards version to 4.5.0, no changes needed.
++
++ -- Anton Gladky <gladk@debian.org> Thu, 19 Nov 2020 20:50:53 +0100
++
++freecad (0.18.4+dfsg2-5) unstable; urgency=medium
++
++ * [6ef07803] cherry-pick upstream commits:
++ - 17ed2b196a58afbbc3cc1bb99f6eb76060171ad2
++ - 1666b28836baa79b26b707afb1e97c2a0855eb1f
++ - 1bca53917db942aa8e0639c8e2c2f33b2e09c1b0
++ and drop new-pyside2.patch patch
++ * [ 1b8737ca ]Drop depends on python3-pyside2uic,
++ dropped by pyside2 (experimental), and add
++ pyqt5-dev-tools for new pyrcc5 tool
++
++ -- Gianfranco Costamagna <locutusofborg@debian.org> Sun, 07 Jun 2020 14:39:33 +0200
++
++freecad (0.18.4+dfsg2-4) unstable; urgency=medium
++
++ * Team upload
++
++ [ Gianfranco Costamagna ]
++ * [224b2c8a] Drop unused libboost-signals-dev (Closes: #962086)
++
++ [ Graham Inggs ]
++ * [e3aa33cd] Fix TaperedHole test for OCCT 7.4 (Closes: #961131)
++
++ -- Gianfranco Costamagna <locutusofborg@debian.org> Sat, 06 Jun 2020 12:07:18 +0200
++
++freecad (0.18.4+dfsg2-3) unstable; urgency=medium
++
++ * [a1d5760] Disable netgen builds for now
++ * [cbbde84] Add patch for OCCT 7.4 regression test case
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Wed, 20 May 2020 03:48:36 -0500
++
++freecad (0.18.4+dfsg2-2) unstable; urgency=medium
++
++ [ Tobias Frost ]
++ * [b742def] Import Ubuntu patches to fix Python 3.8 FTBFS (Closes: #953721).
++ This also includes some other patches from Ubuntu that are worth as they
++ are fixing crashes. Thanks to Gianfranco for his work in Ubuntu.
++
++ [ Kurt Kremitzki ]
++ * [d56ac71] Correct line ending issue with patch
++ * [599ea99] Add opencascade74.patch (Closes: #956543)
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Tue, 19 May 2020 04:24:52 -0500
++
++freecad (0.18.4+dfsg2-1) unstable; urgency=medium
++
++ * [e8be3d7] New upstream version 0.18.4+dfsg2
++ * [5fefd1a] Don't hardcode Python 3 version (Closes: #950137)
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Tue, 11 Feb 2020 06:26:08 -0600
++
++freecad (0.18.4+dfsg1-2) unstable; urgency=medium
++
++ [ Kurt Kremitzki ]
++ * [1e38838] Revert dwz override after upstream fix
++
++ [ Gianfranco Costamagna ]
++ * Team upload
++ * [84844f5] Tweak rules file to make it use with Python3.7
++ (Closes: #945314), the one used during pyside build
++
++ -- Gianfranco Costamagna <locutusofborg@debian.org> Mon, 30 Dec 2019 11:04:13 +0100
++
++freecad (0.18.4+dfsg1-1) unstable; urgency=medium
++
++ * [3928e77] New upstream version 0.18.4+dfsg1
++ * [55b8edd] Update version display patch for 0.18.4
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sun, 03 Nov 2019 13:26:10 -0600
++
++freecad (0.18.3+dfsg1-4) unstable; urgency=medium
++
++ * [e768789] Add dh_dwz override for i386, mipsel, and s390x due to upstream
++ regression
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Wed, 30 Oct 2019 22:43:14 -0500
++
++freecad (0.18.3+dfsg1-3) unstable; urgency=medium
++
++ * [c78f8e9] Revert enabling Netgen/Pybind11 builds
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Tue, 17 Sep 2019 11:00:11 -0500
++
++freecad (0.18.3+dfsg1-2) unstable; urgency=medium
++
++ * [898fd80] Migrate to Python 3 only, Netgen-enabled build (Closes:
++ #936552)
++ * [2c077ab] Bump compat level to 12
++ * [276a12e] Bump Standards-Version to 4.4.0 (no changes needed)
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sun, 08 Sep 2019 17:35:08 -0500
++
++freecad (0.18.3+dfsg1-1) unstable; urgency=medium
++
++ * [5f5b5c2] New upstream version 0.18.3+dfsg1
++ * [6c43d54] Update set_about_freecad.patch for new version
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Thu, 18 Jul 2019 20:12:46 -0500
++
++freecad (0.18.2+dfsg1-1) unstable; urgency=medium
++
++ * [bc5f8c2] New upstream version 0.18.2+dfsg1
++ * [f6afef9] Remove upstream-bugfixes.patch (obsoleted by 0.18.2)
++ * [bb1b36e] Don't save in non-user-writable location by default
++ * [ce51375] Fix missing document icons
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Fri, 07 Jun 2019 22:31:06 -0500
++
++freecad (0.18.1+dfsg1-2) unstable; urgency=medium
++
++ * [5cd3fce] Add missing pyside2 deps
++ * [fd92cc2] Fix breaks+replaces relations (Closes: #926251)
++ * [c61fe87] Add upstream bugfixing patch
++ * [f95e30a] Fix FEM autopkgtest (Closes: #926304 #920535)
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 27 Apr 2019 19:06:02 -0500
++
++freecad (0.18.1+dfsg1-1) unstable; urgency=medium
++
++ * [cab285b] Correct suggested packages
++ * [576bf03] New upstream version 0.18.1+dfsg1
++ * [7cec221] Update rules for 0.18.1
++ * [39bac84] Add patch to display 0.18.1 version
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 06 Apr 2019 13:52:45 -0500
++
++freecad (0.18+dfsg1-1) unstable; urgency=medium
++
++ * [64167ef] New upstream version 0.18+dfsg1
++ * [8c882c8] Remove upstreamed patches fix-start-workbench and
++ fix_qt-5.11_build
++ * [7d77b28] Add NEWS file to announce Python 3 switch
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Thu, 14 Mar 2019 21:43:55 -0500
++
++freecad (0.18~pre1+dfsg1-5) unstable; urgency=medium
++
++ * [e91ae47] Fix update-alternatives problem (Closes: #923465 #923412)
++ * [a7f46c7] Update OpenCASCADE path
++ * [958e27f] Add patch to fix Start WB
++ * [ba149a5] Add lintian override for freecad virtual package
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 02 Mar 2019 03:42:57 -0600
++
++freecad (0.18~pre1+dfsg1-4) unstable; urgency=medium
++
++ * [7865394] Use libqt5opengl5-dev instead of -desktop-dev for armel/armhf
++ builds
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Fri, 15 Feb 2019 14:15:18 -0600
++
++freecad (0.18~pre1+dfsg1-3) unstable; urgency=medium
++
++ * [f852948] Re-add allow-stderr restriction on autopkgtest
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Mon, 11 Feb 2019 13:59:14 -0600
++
++freecad (0.18~pre1+dfsg1-2) unstable; urgency=medium
++
++ * [4f80ffc] Undo accidental autopkgtest reversion
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sun, 10 Feb 2019 16:48:53 -0600
++
++freecad (0.18~pre1+dfsg1-1) unstable; urgency=medium
++
++ * [e648c8e] Add Breaks+Conflicts+Replaces to smooth upgrade
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 09 Feb 2019 17:56:53 -0600
++
++freecad (0.18~pre1+dfsg1-1~exp1) experimental; urgency=medium
++
++ * [f52bb1e] Update packaging for 0.18
++ * [0b830f4] New upstream version 0.18~pre1+dfsg1
++ * [9b83d5c] Update lintian overrides for 0.18
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sun, 27 Jan 2019 19:42:09 -0600
++
++freecad (0.17+dfsg1-8) unstable; urgency=medium
++
++ * [9d6a8a1] Add allow-stderr restriction on autopkgtest (Closes: #920525)
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 26 Jan 2019 18:04:22 -0600
++
++freecad (0.17+dfsg1-7) unstable; urgency=medium
++
++ * [86c1410] Fix autopkgtest command (Closes: #918479)
++ * [d5ee7ff] Update VTK dep to v7
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Fri, 25 Jan 2019 20:33:35 -0600
++
++freecad (0.17+dfsg1-6) unstable; urgency=medium
++
++ * [af5bdfa] Update coin/pivy deps for Coin transition
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Fri, 21 Dec 2018 08:11:47 -0600
++
++freecad (0.17+dfsg1-5) unstable; urgency=medium
++
++ * Upload to unstable
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Thu, 11 Oct 2018 08:14:49 -0500
++
++freecad (0.17+dfsg1-4) experimental; urgency=medium
++
++ * [07492c4] Update dependency to use libqt5opengl5-desktop-dev & exclude
++ armel/armhf
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Thu, 11 Oct 2018 00:37:53 -0500
++
++freecad (0.17+dfsg1-3) experimental; urgency=medium
++
++ * [44d99e3] Remove fail-missing to handle arch-specific builds
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Wed, 10 Oct 2018 02:38:11 -0500
++
++freecad (0.17+dfsg1-2) experimental; urgency=medium
++
++ * [04e05c3] Downgrade VTK dependency back to VTK6
++ * [6f91417] Enable Qt5 builds (Closes: #874877)
++ * [741aae7] Add patch for Qt 5.11 build support
++ * [0939941] Add Breaks+Replaces for FreeCAD < 0.17 (Closes: #906110)
++
++ -- Kurt Kremitzki <kurt@kwk.systems> Mon, 08 Oct 2018 01:32:52 -0500
++
++freecad (0.17+dfsg1-1) experimental; urgency=medium
++
++ * New upstream version 0.17+dfsg1
++ * Update OpenCASCADE dependency to use OCCT instead of OCE
++ * Update VTK dependency to VTK7
++ * Update d/copyright's Files-Excluded section and clean up per lintian
++ warnings
++ * Update Uploaders: add Kurt Kremitzki
++ * Switch default workbench from Start to Part Design due to Qt 4 Webkit
++ deprecation, to be reverted after Qt 5 switch is complete
++ * Removed patches fixed upstream or no longer relevant in 0.17:
++ - fix-836983.patch
++ - fix_FTBFS_on_precise.patch
++ - use_share.patch
++ * Refreshed all other patches including:
++ - remove_webkit.patch: Since this breaks the default Start Workbench,
++ I have updated it to default to Part Design, the new premier WB
++ for this upstream version (i.e. PartDesign Next)
++ * Added lintian override for hardening false positives
++
++ -- Kurt Kremitzki <kkremitzki@gmail.com> Thu, 07 Jun 2018 17:32:47 -0500
++
++freecad (0.16.6712+dfsg1-3) unstable; urgency=medium
++
++ * Team upload
++ * Close Teemu's bug in previous changelog entry
++ * Fix autopkgtest on architectures where char is unsigned by default,
++ thanks Frédéric Bonnard (Closes: #836983)
++ * Install copies of icons since AppStream does not recognize symlinks
++ (Closes: #850965)
++ * Update Uploaders: add Sebastian Kuzminsky
++ remove Adam C. Powell, IV
++
++ -- Graham Inggs <ginggs@debian.org> Mon, 28 May 2018 08:55:04 +0000
++
++freecad (0.16.6712+dfsg1-2) unstable; urgency=medium
++
++ * Team upload.
++
++ [ Teemu Ikonen ]
++ * [a1ddb98] Remove myself from Uploaders. (Closes: #892617)
++
++ [ Anton Gladky ]
++ * [705f952] Update VCS-fields to the salsa-migration
++ * [ddc6548] Set Standards-Version to 4.1.4
++ * [3313fe7] Remove myself from uploaders
++ * [a3ef1ba] Switch to compat-level 11
++ * [6a5a3cb] Remove deprecated Testsuite-field in the d/control
++
++ -- Anton Gladky <gladk@debian.org> Wed, 23 May 2018 22:35:29 +0200
++
++freecad (0.16.6712+dfsg1-1) unstable; urgency=medium
++
++ * [c631550] New upstream version 0.16.6712+dfsg1
++ * [70d3ebc] Refresh patches
++ * [c2f67a5] Remove dependency on Qt4 Webkit. (Closes: #784464)
++ * [31d5630] Set Standards-Version: 4.1.0
++ * [85cc9d9] Change priority to optional
++ * [dc32b52] Set maximal hardening option
++ * [c56abf6] Drop "alpha" from description. (Closes: #868727)
++
++ -- Anton Gladky <gladk@debian.org> Fri, 08 Sep 2017 22:55:20 +0200
++
++freecad (0.16+dfsg2-3) unstable; urgency=medium
++
++ [ Graham Inggs ]
++ * [06c5066] Use PNG and SVG icons instead of XPM (Closes: #850965)
++ * [d40a6a3] Drop debian/menu and do not install XPM icon, see #741573
++ * [d616835] Add Suggests on graphviz and povray (Closes: #849644)
++ * [e25f6a6] Switch to debhelper 10
++ * [f02e70f] Add debian/clean to fix FTBFSx2
++
++ [ Anton Gladky ]
++ * [245dccf] Fix d/copyright.
++ * [3f389af] Apply cme fix dpkg.
++
++ -- Anton Gladky <gladk@debian.org> Fri, 20 Jan 2017 20:05:18 +0100
++
++freecad (0.16+dfsg2-2) unstable; urgency=medium
++
++ * Team upload.
++ [ Anton Gladky ]
++ * Remove freecad-doc from suggests. (Closes: #827734)
++
++ [ Nobuhiro Iwamatsu ]
++ * Fix FTBFS with opencv 3.1. (Closes: #841416)
++
++ -- Anton Gladky <gladk@debian.org> Wed, 23 Nov 2016 05:20:31 +0900
++
++freecad (0.16+dfsg2-1) unstable; urgency=medium
++
++ * [4f08de5] Remove data/examples. (Closes: #745237)
++ * [7434cc4] Imported Upstream version 0.16+dfsg2
++
++ -- Anton Gladky <gladk@debian.org> Sun, 15 May 2016 12:29:42 +0200
++
++freecad (0.16+dfsg1-1) unstable; urgency=medium
++
++ * [9e69a23] Update d/watch.
++ * [bf22c89] Drop copying of Version.h explicitly.
++ * [010b5c8] Refresh/Remove patches.
++ * [24a4f7d] Update d/copyright.
++ * [0547be9] Apply cme fix dpkg-control.
++ * [fc9b859] Update d/copyright.
++ * [6e5df4d] Imported Upstream version 0.16+dfsg1. (Closes: #823816)
++ * [06ed39b] Remove freecad-dev and freecad-doc binaries.
++ * [94c3ac2] Update d/copyright. (Closes: #726805 #745237)
++
++ -- Anton Gladky <gladk@debian.org> Thu, 12 May 2016 20:48:30 +0200
++
++freecad (0.15.4671+dfsg1-4) unstable; urgency=medium
++
++ * [a934100] Add strict dependency on oce>=0.17.1. (Closes: #802517)
++
++ -- Anton Gladky <gladk@debian.org> Fri, 29 Jan 2016 13:10:48 +0100
++
++freecad (0.15.4671+dfsg1-3) unstable; urgency=medium
++
++ [ Abdullah Tahiri ]
++ * [f4d259b] Fix Sketcher: Solver: FullPivLU::compute for Eigen-3.3.
++ (Closes: #811239)
++
++ -- Anton Gladky <gladk@debian.org> Sun, 17 Jan 2016 13:44:36 +0100
++
++freecad (0.15.4671+dfsg1-2) unstable; urgency=medium
++
++ * [0c78ef5] Remove EIGEN2_SUPPORT. (Closes: #786356)
++
++ -- Anton Gladky <gladk@debian.org> Sun, 25 Oct 2015 18:51:47 +0100
++
++freecad (0.15.4671+dfsg1-1) unstable; urgency=medium
++
++ * [4b6e554] Update d/copyright.
++ * [dd370f0] Update d/watch.
++ * [a70bba6] Imported Upstream version 0.15.4671+dfsg1. (Closes: #789105)
++ * [80ccaac] Refresh patches.
++ * [c868df9] Add pyside-tools as dependency.
++ * [ab8015b] Drop the load of news-page. (Closes: #787948)
++
++ -- Anton Gladky <gladk@debian.org> Thu, 27 Aug 2015 22:54:47 +0200
++
++freecad (0.14.3702+dfsg-4) unstable; urgency=medium
++
++ [ Anton Gladky ]
++ * [7dbbdb6] Set Standards-Version: 3.9.6. No changes.
++ * [99c5e82] Apply cme fix dpkg-control.
++
++ [ Martin Pitt ]
++ * [91ef5e9] Work around Qt4 not being compatible with boost+gcc5.
++ (Closes: #795069)
++
++ -- Anton Gladky <gladk@debian.org> Wed, 12 Aug 2015 20:34:02 +0200
++
++freecad (0.14.3702+dfsg-3) unstable; urgency=medium
++
++ [ Yorik van Havre ]
++ * [9ddbf15] Disable automatic DXF library download. (Closes: #764814)
++
++ -- Anton Gladky <gladk@debian.org> Fri, 24 Oct 2014 18:59:03 +0200
++
++freecad (0.14.3702+dfsg-2) unstable; urgency=medium
++
++ [ Anton Gladky ]
++ * [aafcc31] Remove libswscale-dev from BD. (Closes: #757282)
++ * [81d4b6e] Fix installing of som Mods. (Closes: #736273)
++ * [1a4492e] Remove deprecated lines from d/copyright. (Closes: #745237)
++
++ [ Alexander ]
++ * [efc7d53] Fix compilation with clang. (Closes: #755305)
++
++ -- Anton Gladky <gladk@debian.org> Sun, 24 Aug 2014 08:12:43 +0200
++
++freecad (0.14.3702+dfsg-1) unstable; urgency=medium
++
++ * [7fc727b] Imported Upstream version 0.14.3702
++ * [3edf0de] Refresh patches.
++ * [077b63a] Redirect unittest output into stdout. Fixes autopkgtests.
++
++ -- Anton Gladky <gladk@debian.org> Tue, 22 Jul 2014 20:15:18 +0200
++
++freecad (0.13.3637-dfsg-1) unstable; urgency=medium
++
++ * [ddeee1c] Imported Upstream version 0.13.3637-dfsg
++ * [0fe87be] Update/remove patches.
++ * [60ad7cc] Update install files, dependencies.
++ * [9f9cca3] Add autopkgtest.
++
++ -- Anton Gladky <gladk@debian.org> Sun, 25 May 2014 19:05:13 +0200
++
++freecad (0.13.2935-dfsg-1.1) unstable; urgency=low
++
++ * Non-maintainer upload.
++ * Update xerces build dependency to libxerces-c-dev. (Closes: #733072)
++
++ -- Jay Berkenbilt <qjb@debian.org> Wed, 15 Jan 2014 12:19:37 -0500
++
++freecad (0.13.2935-dfsg-1) unstable; urgency=medium
++
++ * [824153f] Move python-collada and python-ply from Recommends to Depends.
++ * [3047a6b] Imported Upstream version 0.13.2935-dfsg
++ * [36a4082] Bump Standards-Version: 3.9.5. No changes.
++
++ -- Anton Gladky <gladk@debian.org> Wed, 01 Jan 2014 20:29:15 +0100
++
++freecad (0.13.2800-dfsg-1) unstable; urgency=low
++
++ * [e051565] Imported Upstream version 0.13.2800-dfsg. (Closes: #730952)
++ * [a2f0187] Update debian/copyright. (Closes: #726805)
++
++ -- Anton Gladky <gladk@debian.org> Mon, 02 Dec 2013 22:11:10 +0100
++
++freecad (0.13.2580-dfsg-2) unstable; urgency=low
++
++ * [2aab6f0] Update and re-enable disable_memory_check.patch.
++ * [4d36847] Use wrap-and-sort.
++
++ -- Anton Gladky <gladk@debian.org> Mon, 30 Sep 2013 18:49:23 +0200
++
++freecad (0.13.2580-dfsg-1) unstable; urgency=low
++
++ [ Anton Gladky ]
++ * [1190215] Update get_git_orig_src.sh.
++ * [077e969] Build against BSD-version of soqt. (Closes: #617613)
++ * [37d60d0] Update patches, remove some of them.
++ * [b4801bc] Simplify debian/rules.
++ * [40ddd86] Imported Upstream version 0.13.2580-dfsg
++ * [61e7426] Minor fix in installation files.
++ * [fcaeb91] Fix syntax error in importOCA.py.
++ * [429db74] Ignore quilt dir
++ * [ffccc7d] Unapply patches after build
++
++ [ Sebastian Hoogen ]
++ * [aa8ab82] Use packaged version of python-ply.
++
++ -- Anton Gladky <gladk@debian.org> Fri, 27 Sep 2013 19:56:46 +0200
++
++freecad (0.13.1830-dfsg-3) unstable; urgency=low
++
++ [ Simon Ruderich ]
++ * [71fd1c2] Hardening CPPFLAGS and LDFLAGS. (Closes: #711243)
++
++ [ Peter Michael Green ]
++ * [36d7879] Fix build failures with new oce by forcing occ include directory.
++ (Closes: 718545, 717034)
++ * [7fa3e69] Remove some stuff left behind by build process in clean target
++ to prevent errors from dpkg-source when building multiple times
++ in a row.
++ - obj-*
++ - src/Mod/Start/Gui/share
++ - src/Mod/Drawing/App/share
++
++ [ Anton Gladky ]
++ * [5906d0e] Update debian-copyright-file.
++ * [07d04d1] Move python-collada from Depends to Recommends-section.
++ * [cf6cb9f] Add python-collada to Depends.
++ * [36b4bc0] Add versioned dependency on libsoqt4-20. (Closes: #711812)
++ * [32738be] Use canonical VCS.
++
++ -- Anton Gladky <gladk@debian.org> Wed, 07 Aug 2013 23:43:36 +0200
++
++freecad (0.13.1830-dfsg-2) unstable; urgency=low
++
++ * [800a2d9] Compile freecad against libcoin80. (Closes: #617613)
++ * [abee4e5] Compile against fltk1.3 instead of fltk1.1
++ * [23916ae] Raise the minimal version of soqt4-dev due to coin80.
++ * [87207ba] Update homepage.
++ * [224f12d] Add versioned dependency on python-pivy.
++
++ -- Anton Gladky <gladk@debian.org> Thu, 30 May 2013 19:48:30 +0200
++
++freecad (0.13.1830-dfsg-1) unstable; urgency=low
++
++ [ Boris Pek ]
++ * [fbdfc08] Update debian/rules: use src/Build/Version.h provided by upstream.
++ (Closes: #706578)
++ * [eb29048] Update scripts/get_git_orig_src.sh: - change version format.
++
++ -- Anton Gladky <gladk@debian.org> Thu, 02 May 2013 23:05:20 +0200
++
++freecad (0.13.1830-dfsg-1~exp1) experimental; urgency=low
++
++ * [0175d6f] Add python-matplotlib to depends-section.
++ * [eb9bc9a] Imported Upstream version 0.13.1830-dfsg
++ * [e2ec220] Use Standards-Version: 3.9.4. No changes.
++ * [25815b6] Remove obsolete DM-Upload-Allowed flag.
++ * [24f4cd0] Update dates in copyright-file.
++
++ -- Anton Gladky <gladk@debian.org> Mon, 04 Feb 2013 22:11:12 +0100
++
++freecad (0.13~20130106.gitafb3355-exp1) experimental; urgency=low
++
++ * [0efcf90] Imported Upstream version 0.13~20130106.gitafb3355
++ * [a5ddc03] Install missing usr/share. (Closes: #697573)
++
++ -- Anton Gladky <gladky.anton@gmail.com> Thu, 10 Jan 2013 18:45:11 +0100
++
++freecad (0.13~20121120.git5082ae2-2~exp2) experimental; urgency=low
++
++ * [bcc4f2e] Enable dir_as_string.patch.
++ * [41e4a4e] Fix python-warning during install.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Fri, 23 Nov 2012 22:11:25 +0100
++
++freecad (0.13~20121120.git5082ae2-1) experimental; urgency=low
++
++ [ Sandro Knauß ]
++ * [3d64502] Adding libode-dev, libspnav-dev to Builddeps.
++ Remove all autotool Builddeps.
++ * [c432199] use more debianize directories in debian/rules.
++ * [0a1599d] Add debian/patches/dir_as_string.patch.
++ * [217ec7c] Add debian/patches/use_install_rpath.patch.
++ * [36766ed] Add debian/patches/use_share.pach.
++
++ [ Anton Gladky ]
++ * [96fc2ed] Use cmake for git-version of freecad.
++ * [581b23b] Prepare for 0.13rc
++ * [d9b01ef] Fix compilation.
++ * [197b945] Add script for getting freecad from git-repo.
++ * [ebae551] Imported Upstream version 0.13~20121120.git5082ae2
++
++ -- Anton Gladky <gladky.anton@gmail.com> Tue, 20 Nov 2012 19:22:23 +0100
++
++freecad (0.12.5284-dfsg-7) unstable; urgency=low
++
++ * [b420ea0] Add -fpermissive to cpp, c-flags to fix FTBFS with gcc-4.7.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Mon, 14 May 2012 19:32:10 +0200
++
++freecad (0.12.5284-dfsg-6) unstable; urgency=low
++
++ * [d31cbf4] Disable python-pivy depends on powerpc.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Thu, 12 Apr 2012 21:05:36 +0200
++
++freecad (0.12.5284-dfsg-5) unstable; urgency=low
++
++ * [4d3e1c0] Do not build freecad parallel, it causes FTBFS sometimes ( -j5).
++ * [d749637] Fix FTBFS during compiling against oce-0.9.1.
++ Thanks to Denis Barbier. (Closes: #664207)
++ * [28cb8ba] Fix bug of identifying SWIG version.
++ Thanks to Werner Mayer <werner.wm.mayer@gmx.de>.
++ (Closes: #646374)
++ * [fde200f] Use Standards-Version 3.9.3. No changes.
++ * [595a19e] Minor update of copyright file due to released DEP-5.
++ * [65ef554] Enable HAVE_SWIG option.
++ * [1af4c8a] Fix crash in Help->About menu. (Closes: #663704)
++
++ -- Anton Gladky <gladky.anton@gmail.com> Sun, 18 Mar 2012 08:51:19 +0100
++
++freecad (0.12.5284-dfsg-4) unstable; urgency=low
++
++ * [84c5407] Add needed #include. Fix compilation on Ubuntu Precise.
++ * [7b3d15a] Move python-pivy from recommends to depends section.
++ (Closes: #646374)
++ * [9136519] Update homepage section.
++ * [da53f03] Raise dh-compat to version 8.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Fri, 17 Feb 2012 19:59:20 +0100
++
++freecad (0.12.5284-dfsg-3) unstable; urgency=low
++
++ * [da3974a] Switch from opencascade to oce. (Closes: #659133)
++
++ -- Anton Gladky <gladky.anton@gmail.com> Thu, 09 Feb 2012 20:55:05 +0100
++
++freecad (0.12.5284-dfsg-2) unstable; urgency=low
++
++ * [125b5f6] Add libeigen3-dev to "depends" in freecad-dev.
++ * Rebuild due to opencv-transition.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Sun, 22 Jan 2012 20:07:21 +0100
++
++freecad (0.12.5284-dfsg-1) unstable; urgency=low
++
++ * [99b66f2] Imported Upstream version 0.12.5284-dfsg
++ * [dc52b9c] Remove patch (gcc-4.6 compilation), hopefully applied by upstream.
++ * [f66ef5d] Remove patch (typo).
++ * [ce862a0] Update copyright file (add data-files).
++ * [91d5731] Use eigen3 instead of eigen2.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Mon, 09 Jan 2012 21:29:18 +0100
++
++freecad (0.11.4446-dfsg-4) unstable; urgency=low
++
++ * [d3ec609] Make a line in changelog shorter. Fix lintian-warning.
++ * [df77453] Fix (hopefully) FTBFS on Armel. Thanks to Paul Brook.
++ (Closes: #623559)
++
++ -- Anton Gladky <gladky.anton@gmail.com> Fri, 28 Oct 2011 20:25:21 +0200
++
++freecad (0.11.4446-dfsg-3) unstable; urgency=low
++
++ * [12d6b55] Add -lrt key in LDFLAGS to configure properly opencascade on
++ kfreebsd.
++ * [bbd8acc] Remove .la files from -dev binary.
++ * [8932ee7] Disable memory check in SMDS. (Closes: #623560).
++
++ -- Anton Gladky <gladky.anton@gmail.com> Sat, 24 Sep 2011 16:35:30 +0200
++
++freecad (0.11.4446-dfsg-2) unstable; urgency=low
++
++ * [93347cc] Switch off SWIG to fix FTBFS. (Closes: #632348)
++
++ -- Anton Gladky <gladky.anton@gmail.com> Tue, 05 Jul 2011 22:41:21 +0200
++
++freecad (0.11.4446-dfsg-1) unstable; urgency=low
++
++ [ Teemu Ikonen ]
++ * [58f7907] Copyright: Update.
++
++ [ Anton Gladky ]
++ * [f5d9322] Imported Upstream version 0.11.4446-dfsg. (Closes: #576653).
++ * [aeacc72] Add DM-Upload-Allowed field.
++ * [b08f851] Add changes to debian/rules as suggested by Werner Mayer.
++ * [c82751a] Delete old patches.
++ * [e71109f] Add libopencascade-ocaf-dev to BD.
++ * [9746063] Import patch to fix compilation error with GCC-4.6.
++ * [175e959] Update watch file.
++ * [7989aa6] Update debian/rules to dh 7, thanks to Bernhard R. Link.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Thu, 09 Jun 2011 21:27:03 +0200
++
++freecad (0.11.3729.dfsg-2) unstable; urgency=low
++
++ * Add gfortran and libopencascade-visualization-dev to BD
++ to fix FTBFS (closes: #622694)
++ * Add libqtwebkit-dev to BD (closes: #618241)
++ * Delete quilt from BD and corresponding changes in rules.
++ * Add description to freecad-occ650.patch
++ * Delete encoding string from .desktop
++ * Fix some spelling errors, pointed out by lintian.
++
++ -- Anton Gladky <gladky.anton@gmail.com> Thu, 14 Apr 2011 10:23:25 +0100
++
++freecad (0.11.3729.dfsg-1) unstable; urgency=low
++
++ [ Denis Barbier ]
++ * Merge OpenCASCADE 6.5.0 compatibility patch (closes: #617545).
++
++ [ Adam C. Powell, IV ]
++ * New upstream (closes: #622213, #618241).
++ * Changed to source format 3.0 (quilt).
++ * Added patch target which forces autotools to run, and automake and autoconf
++ are now in Build-Depends (closes: #607181).
++ * Set aside src/Build/Version.h to prevent build problems.
++ * Does not install .la files (closes: #621298).
++ * Boost 1.46 compatibility patch (closes: #621877).
++ * Set aside files which autotools modifies so clean works.
++ * Added libtool to Build-Depends (thanks: PICCA Frédéric-Emmanuel).
++ * Bumped Standards-Version, no changes needed.
++
++ -- "Adam C. Powell, IV" <hazelsct@debian.org> Tue, 12 Apr 2011 23:40:30 -0400
++
++freecad (0.10.3247.dfsg-2) unstable; urgency=low
++
++ * control:
++ - Update to standars-version 3.9.0.
++ - Remove libblas-dev, libatlas-dev from build-deps.
++ * Add debian/shlibs.local file containing the the correct binary dep
++ to libsoqt4-20 (closes: #575239).
++ * copyright: Add a verbatim copy of Tiddlywiki BSD license. Fixes
++ the lintian warning copyright-refers-to-deprecated-bsd-license-file.
++ * Add kFreeBSD portability fixes. Thanks to Petr Salinger
++ <Petr.Salinger@seznam.cz> for the patch (closes: #592461).
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Wed, 18 Aug 2010 19:34:36 +0200
++
++freecad (0.10.3247.dfsg-1) unstable; urgency=low
++
++ * New upstream version (closes: #582627)
++ * Add debian/source/format file with contents "1.0".
++ * Use freecad.xpm as icon in menu and desktop files.
++ * copyright: Add licensing information for new files in this release.
++ * src/Base/Makefile.in, src/Gui/Makefile.in: Do not remove *.tab.c files
++ in make distclean target.
++ * control:
++ - Add build-dep to libeigen2-dev.
++ - Update to standards-version 3.8.4.
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Mon, 05 Jul 2010 15:07:49 +0200
++
++freecad (0.9.2646.5.dfsg-1) unstable; urgency=low
++
++ * Add 'dfsg' extension to upstream version, upstream sources are unchanged.
++ * Remove libgl1-mesa-dev build-dep, rely on libcoin to pull in GL libraries.
++ * Change build-dep libatlas-headers to libatlas-dev (closes: #577309).
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Fri, 14 May 2010 17:20:35 +0200
++
++freecad (0.9.2646.5-1) unstable; urgency=low
++
++ * New upstream version (closes: #561696).
++ * Added swig to Build-Depends (closes: #563523, #563772).
++ * Removed python-opencv from Build-Depends and Recommends (closes: #560768).
++
++ -- "Adam C. Powell, IV" <hazelsct@debian.org> Mon, 11 Jan 2010 08:48:33 -0500
++
++freecad (0.9.2646.4-1) unstable; urgency=low
++
++ * New upstream version (closes: #559849, #559846).
++
++ -- "Adam C. Powell, IV" <hazelsct@debian.org> Fri, 11 Dec 2009 20:21:32 -0500
++
++freecad (0.9.2646.3-1) unstable; urgency=low
++
++ * New upstream version. Removes TiddlySaver.jar, fixes help problems.
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Thu, 03 Dec 2009 19:39:27 +0100
++
++freecad (0.9.2646-1) unstable; urgency=low
++
++ [ Werner Mayer ]
++ * New upstream release
++ * In-source copy of PyCXX has been dropped (closes: #547936)
++ * In-source copy of zipios++ has been dropped (closes: #547941)
++ * Change build-dependency on python2.5-dev to python-dev
++ * Add freecad-doc binary package
++ * Remove Suggestion of a chm viewer, suggest freecad-doc instead
++
++ [ Teemu Ikonen ]
++ * Add override to dh_compress
++ * Add versioned build-deb to debhelper (>= 7.0.50)
++ * Add build-deps to libzipios++-dev and python-cxx-dev.
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Tue, 17 Nov 2009 14:22:00 +0100
++
++freecad (0.8.2237-2) unstable; urgency=low
++
++ * Added libboost-python-dev to Build-Depends (closes: #549738).
++ * Added myself to uploaders list.
++ * Bumped Standards-Version.
++
++ -- "Adam C. Powell, IV" <hazelsct@debian.org> Thu, 12 Nov 2009 12:02:42 -0500
++
++freecad (0.8.2237-1) unstable; urgency=low
++
++ * New Upstream release
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Thu, 16 Jul 2009 18:37:41 +0200
++
++freecad (0.7.1658-1) UNRELEASED; urgency=low
++
++ * New upstream release
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Mon, 20 Oct 2008 15:35:58 +0200
++
++freecad (0.7.1514-1) UNRELEASED; urgency=low
++
++ * New upstream version
++ * Add more stuff to the copyright file
++ * control: add build-dep to python-central
++
++ -- Teemu Ikonen <tpikonen@gmail.com> Wed, 06 Aug 2008 18:25:02 +0200
++
++freecad (0.7.1350-1hardy1) UNRELEASED; urgency=low
++
++ * Package for Ubuntu 8.04 (Hardy Heron)
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Thu, 29 May 2008 11:11:20 +0200
++
++freecad (0.7.1350-1gutsy1) UNRELEASED; urgency=low
++
++ * Backport to Ubuntu 7.10 (Gutsy Gibbon)
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Sat, 24 May 2008 01:54:39 +0200
++
++freecad (0.7.1350-1feisty1) UNRELEASED; urgency=low
++
++ * Backport to Ubuntu 7.04 (Feisty Fawn)
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Sat, 24 May 2008 00:09:08 +0200
++
++freecad (0.7.1350-1) UNRELEASED; urgency=low
++
++ * New upstream release from sf.net
++ * Import to debian-science repository at git.debian.org
++ * control:
++ - Update to standards-version 3.7.3
++ - Add Vcs-* fields pointing to git.debian.org
++ - Improve descriptions
++ * Convert copyright to (pseudo) machine readable format, audit source
++ * Fix categories in .desktop file
++ * Change Section to Science/Engineering in .doc-base and menu files
++ * rules: do not ignore errors on clean target, add dh_desktop call
++ -- Teemu Ikonen <tpikonen@gmail.com> Tue, 05 Aug 2008 18:58:07 +0200
++
++freecad (0.7.1344-1ubuntu2) UNRELEASED; urgency=low
++
++ * New package with fixed self-dependency problem
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Thu, 22 May 2008 15:34:34 +0200
++
++freecad (0.7.1344-1ubuntu1) UNRELEASED; urgency=low
++
++ * New debian package for Feisty
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Thu, 22 May 2008 11:04:06 +0200
++
++freecad (0.7.1344-1) UNRELEASED; urgency=low
++
++ * Write patch file to make builds with OpenCASCADE libs inside but with no
++ dependency to libopencascade6.2
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Wed, 21 May 2008 10:06:07 +0200
++
++freecad (0.7.1343-1) UNRELEASED; urgency=low
++
++ * Embed required OpenCASCADE libs into this package as long as no official
++ Debian package is available
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Tue, 20 May 2008 00:40:39 +0200
++
++freecad (0.7.1342-1) UNRELEASED; urgency=low
++
++ * Switch to new versioning scheme of OpenCASCADE packages
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Mon, 19 May 2008 23:55:31 +0200
++
++freecad (0.7.1316-1) UNRELEASED; urgency=low
++
++ * Support of pivy (Python binding for Coin/SoQt)
++ * Support of PyQt4
++ * General support of SWIG modules
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Sat, 26 Apr 2008 13:51:25 +0200
++
++freecad (0.7.1031-1) UNRELEASED; urgency=low
++
++ * Qt4 port finished
++ * Support of Python binding for Qt4
++ * Support of Python binding for Coin
++ * Support of entirely in Python written modules
++ * Added support of model driven architecture for Python binding
++ * Use boost's signal/slot mechanism to update data
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Fri, 04 Jan 2008 13:50:37 +0200
++
++freecad (0.7.645-1) UNRELEASED; urgency=low
++
++ * Qt4 port started
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Tue, 24 Jul 2007 13:04:37 +0200
++
++freecad (0.6.472-1) UNRELEASED; urgency=low
++
++ * Initial Release
++
++ -- Werner Mayer <wmayer@users.sourceforge.net> Tue, 26 Sep 2006 16:55:15 +0200
--- /dev/null
--- /dev/null
++src/Tools/generateBase/*.pyc
++src/Tools/generateTemplates/*.pyc
--- /dev/null
--- /dev/null
++Source: freecad
++Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
++Uploaders: Sebastian Kuzminsky <seb@highlab.com>,
++ Kurt Kremitzki <kkremitzki@debian.org>
++Section: science
++Priority: optional
++Build-Depends: cmake,
++ debhelper-compat (= 13),
++ dh-exec,
++ dh-python,
++ libboost-date-time-dev,
++ libboost-dev,
++ libboost-filesystem-dev,
++ libboost-graph-dev,
++ libboost-iostreams-dev,
++ libboost-program-options-dev,
++ libboost-python-dev,
++ libboost-regex-dev,
++ libboost-serialization-dev,
++ libboost-thread-dev,
++ libcoin-dev,
++ libdouble-conversion-dev,
++ libglew-dev,
++ liblz4-dev,
++ libopencv-dev,
++ libeigen3-dev,
++ libgts-bin,
++ libgts-dev,
++ libkdtree++-dev,
++ libmedc-dev,
++ libmetis-dev,
++ libocct-data-exchange-dev,
++ libocct-ocaf-dev,
++ libocct-visualization-dev,
++ libproj-dev,
++ libpyside2-dev,
++ libqt5opengl5-dev,
++ libqt5svg5-dev,
++ libqt5webkit5-dev [!amd64 !arm64 !armhf !i386 !mips64el !mipsel],
++ libqt5xmlpatterns5-dev,
++ libqt5x11extras5-dev,
++ libshiboken2-dev,
++ libspnav-dev,
++ libvtk9-dev,
++ libx11-dev,
++ libxerces-c-dev,
++ libzipios++-dev,
++ lsb-release,
++ occt-draw,
++ pybind11-dev,
++ pyqt5-dev-tools,
++ pyside2-tools,
++ python3-dev,
++ python3-matplotlib,
++ python3-ply,
++ python3-pyside2.qtcore,
++ python3-pyside2.qtgui,
++ python3-pyside2.qtsvg,
++ python3-pyside2.qtuitools,
++ python3-pyside2.qtwidgets,
++ python3-pyside2.qtxml,
++ python3-requests,
++ qtbase5-dev,
++ qttools5-dev,
++ qtwebengine5-dev [amd64 arm64 armhf i386 mips64el mipsel],
++ swig
++Build-Depends-Indep: doxygen
++Standards-Version: 4.6.1
++Vcs-Browser: https://salsa.debian.org/science-team/freecad
++Vcs-Git: https://salsa.debian.org/science-team/freecad.git
++Homepage: https://freecadweb.org/
++Rules-Requires-Root: no
++
++Package: freecad
++Architecture: all
++Depends: freecad-python3 (>= ${source:Version}),
++ freecad-python3 (<< ${source:Version}.1~),
++ ${misc:Depends},
++ ${shlibs:Depends}
++Recommends: calculix-ccx,
++ graphviz
++Suggests: povray
++Breaks: freecad (<< 0.18)
++Replaces: freecad (<< 0.18)
++Description: Extensible Open Source CAx program
++ For 3D printing, CNC milling or for the manual assembly of complicated
++ constructs one needs a formal specification of the workpiece, i.e.,
++ its parts and how these come together. The process to get there is
++ called Computer-Aided Design (CAD). The process to transform a CAD
++ model into a series of instructions that can be performed on a machine
++ is called Computer-Aided Manufacturing (CAM). FreeCAD can do both, the
++ prior yet a bit better than the latter.
++ .
++ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
++ It features some key concepts like macro recording, workbenches, ability
++ to run as a server and dynamically loadable application extensions and
++ it is designed to be platform independent.
++ .
++ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
++ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
++ Editing and modeling features are currently somewhat limited.
++ .
++ This is a metapackage of FreeCAD component packages.
++
++Package: freecad-python3
++Architecture: any
++Depends: freecad-common (= ${source:Version}),
++ python3-matplotlib,
++ python3-pivy,
++ python3-ply,
++ python3-pyside2.qtcore,
++ python3-pyside2.qtgui,
++ python3-pyside2.qtnetwork,
++ python3-pyside2.qtsvg,
++ python3-pyside2.qtuitools,
++ python3-pyside2.qtwidgets,
++ python3-pyside2.qtxml,
++ python3-yaml,
++ libfreecad-python3-0.20 (= ${binary:Version}),
++ ${misc:Depends},
++ ${python3:Depends},
++ ${shlibs:Depends}
++Recommends: python3-pyside2.qtwebchannel,
++ python3-pyside2.qtwebengine,
++ python3-pyside2.qtwebenginecore,
++ python3-pyside2.qtwebenginewidgets
++Breaks: libfreecad-python2-0.17
++Replaces: libfreecad-python2-0.17
++Description: Extensible Open Source CAx program - Python 3 binaries
++ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
++ It features some key concepts like macro recording, workbenches, ability
++ to run as a server and dynamically loadable application extensions and
++ it is designed to be platform independent.
++ .
++ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
++ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
++ Editing and modeling features are currently somewhat limited.
++ .
++ This package contains the FreeCAD binaries built against Python 3.
++
++Package: freecad-common
++Architecture: all
++Depends: ${misc:Depends},
++ ${shlibs:Depends}
++Breaks: freecad (<< 0.18),
++ freecad-python2 (<< 0.18),
++ freecad-runtime (<< 0.20)
++Replaces: freecad (<< 0.18),
++ freecad-python2 (<< 0.18),
++ freecad-runtime (<< 0.20)
++Multi-Arch: foreign
++Description: Extensible Open Source CAx program - common files
++ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
++ It features some key concepts like macro recording, workbenches, ability
++ to run as a server and dynamically loadable application extensions and
++ it is designed to be platform independent.
++ .
++ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
++ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
++ Editing and modeling features are currently somewhat limited.
++ .
++ This package contains FreeCAD common files and resources.
++
++Package: libfreecad-python3-0.20
++Architecture: any
++Section: libs
++Depends: ${misc:Depends},
++ ${shlibs:Depends}
++Breaks: libfreecad-python3-0.18,libfreecad-python3-0.19
++Replaces: libfreecad-python3-0.18,libfreecad-python3-0.19
++Description: Extensible Open Source CAx program - Python 3 library files
++ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
++ It features some key concepts like macro recording, workbenches, ability
++ to run as a server and dynamically loadable application extensions and
++ it is designed to be platform independent.
++ .
++ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
++ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
++ Editing and modeling features are currently somewhat limited.
++ .
++ This package contains shared library files for FreeCAD built against Python 3.
--- /dev/null
--- /dev/null
++Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
++Upstream-Name: FreeCAD
++Upstream-Contact: Werner Mayer <wmayer@users.sourceforge.net>
++Source: https://github.com/freecad/freecad
++Files-Excluded:
++ data/examples
++ data/tests/*.fcstd
++ src/Doc/freecad.qch.part*
++ src/Doc/freecad.qhc
++ src/MacAppBundle
++ src/Tools/_TEMPLATE_
++ src/3rdParty/libkdtree
++
++Files: *
++Copyright: 2001-2016 Jürgen Riegel <juergen.riegel@web.de>,
++ Werner Mayer <wmayer@users.sourceforge.net>
++License: LGPL-2+
++
++Files: src/3rdParty/salomesmesh/*
++Copyright: 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, CEDRAT,
++ EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
++ 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
++License: LGPL-2.1
++
++Files: src/3rdParty/salomesmesh/src/MEFISTO2/*
++Copyright: 2006 Laboratoire J.-L. Lions UPMC Paris
++License: LGPL-2.1
++
++Files: src/Base/Base64.*
++Copyright: 2004-2008 Rene Nyffenegger <rene.nyffenegger@adp-gmbh.ch>
++License: other
++ This source code is provided 'as-is', without any express or implied
++ warranty. In no event will the author be held liable for any damages
++ arising from the use of this software.
++ .
++ Permission is granted to anyone to use this software for any purpose,
++ including commercial applications, and to alter it and redistribute it
++ freely, subject to the following restrictions:
++ .
++ 1. The origin of this source code must not be misrepresented; you must not
++ claim that you wrote the original source code. If you use this source code
++ in a product, an acknowledgment in the product documentation would be
++ appreciated but is not required.
++ .
++ 2. Altered source versions must be plainly marked as such, and must not be
++ misrepresented as being the original source code.
++ .
++ 3. This notice may not be removed or altered from any source distribution.
++
++Files: src/Base/fdstream.hpp
++Copyright: 2001 Nicolai M. Josuttis
++License: other-josuttis
++ Permission to copy, use, modify, sell and distribute this software
++ is granted provided this copyright notice appears in all copies.
++ This software is provided "as is" without express or implied
++ warranty, and with no claim as to its suitability for any purpose.
++
++Files: src/Base/gzstream.*
++Copyright: 2001 Deepak Bandyopadhyay, Lutz Kettner
++License: LGPL-2.1
++
++Files: src/Base/PyTools.*
++Copyright: 1996-2000 Mark Lutz, and O'Reilly and Associates.
++License: other-lutz
++ Permission to use, copy, modify, and distribute this software
++ for any purpose and without fee is hereby granted. This software
++ is provided on an as is basis, without warranties of any kind.
++
++Files: src/Base/BoundBox.h src/Base/Swap.* src/Base/Vector3D.* src/Base/ViewProj.h src/Base/Matrix.* src/Base/Tools2D.* src/Mod/Mesh/App/Core/*
++Copyright: 2005 Imetric 3D GmbH
++License: GPL-2+
++ On Debian systems, the complete text of the GNU General Public
++ License version 2 can be found in `/usr/share/common-licenses/GPL-2'.
++
++Files: src/Gui/iisTaskPanel/src/*
++Copyright: http://www.ii-system.com
++License: LGPL-2.1
++
++Files: src/Mod/Draft/importAirfoilDAT.py
++Copyright: 2010 Heiko Jakob <heiko.jakob@gediegos.de>
++License: LGPL-2+
++
++Files: src/Mod/Mesh/App/Core/Builder.h
++ src/Mod/Mesh/App/Core/SetOperations.*
++ src/Mod/Mesh/BuildRegularGeoms.py
++Copyright: 2005 Berthold Grupp
++License: LGPL-2+
++
++Files: src/Mod/Image/App/ImageBase.* src/Mod/Image/Gui/GLImageBox.* src/Mod/Image/Gui/ImageView.* src/Mod/Image/Gui/XpmImages.h
++Copyright: 2004 Imetric 3D GmbH
++License: LGPL-2+
++
++Files: src/Mod/Mesh/App/Core/tritritest.h
++Copyright: 1997 Tomas Moller <tam@cs.lth.se>
++License: other-moller
++ tritritest.h has no licensing information, but Tomas Moller replied
++ the following, when asked about it:
++ .
++ The code is free to use for anyone and any projects, but I give no
++ warranties.
++
++Files: src/Mod/Mesh/App/WildMagic4/*
++Copyright: 1998-2007 David Eberly http://www.geometrictools.com
++License: LGPL-2.1+
++
++Files: src/Mod/Part/App/edgecluster.*
++Copyright: 2010 Joachim Zettler <Joachim.Zettler@gmx.de>
++License: LGPL-2+
++
++Files: src/Mod/Raytracing/App/resources/*
++Copyright: 2005 Georg Wiora <georg.wiora@quarkbox.de>,
++ Juergen Riegel <juergen.riegel@web.de>
++License: LGPL-2+
++
++Files: src/Mod/Test/unittestgui.py
++Copyright: 1999-2001 Steve Purcell
++License: PSF
++ This module is free software, and you may redistribute it and/or modify
++ it under the same terms as Python itself, so long as this copyright message
++ and disclaimer are retained in their original form.
++ .
++ IN NO EVENT SHALL THE AUTHOR BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
++ SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
++ THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
++ DAMAGE.
++ .
++ THE AUTHOR SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT
++ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
++ PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS,
++ AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE,
++ SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
++
++Files: src/Tools/generateBase/generateDS.py
++Copyright: 2003 Dave Kuhlman
++License: Expat
++ Permission is hereby granted, free of charge, to any person obtaining
++ a copy of this software and associated documentation files (the
++ "Software"), to deal in the Software without restriction, including
++ without limitation the rights to use, copy, modify, merge, publish,
++ distribute, sublicense, and/or sell copies of the Software, and to
++ permit persons to whom the Software is furnished to do so, subject to
++ the following conditions:
++ .
++ The above copyright notice and this permission notice shall be included
++ in all copies or substantial portions of the Software.
++ .
++ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
++ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
++ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
++ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
++ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
++ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++
++Files: src/Base/QuantityParser.c src/Gui/SelectionFilter.tab.c
++Copyright: 1984, 1989-1990, 2000-2006, 2009-2010 Free Software Foundation, Inc.
++License: GPL-3+ with Bison exception
++ This program is free software: you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation, either version 3 of the License, or
++ (at your option) any later version.
++ .
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++ .
++ You should have received a copy of the GNU General Public License
++ along with this program. If not, see <http://www.gnu.org/licenses/>.
++ .
++ As a special exception, you may create a larger work that contains
++ part or all of the Bison parser skeleton and distribute that work
++ under terms of your choice, so long as that work isn't itself a
++ parser generator using the skeleton or a modified version thereof
++ as a parser skeleton. Alternatively, if you modify or redistribute
++ the parser skeleton itself, you may (at your option) remove this
++ special exception, which will cause the skeleton and the resulting
++ Bison output files to be licensed under the GNU General Public
++ License without this special exception.
++ .
++ This special exception was added by the Free Software Foundation in
++ version 2.2 of Bison.
++ .
++ C LALR(1) parser skeleton written by Richard Stallman, by
++ simplifying the original so-called "semantic" parser.
++ .
++ All symbols defined below should begin with yy or YY, to avoid
++ infringing on user name space. This should be done even for local
++ variables, as they might otherwise be expanded by user macros.
++ There are some unavoidable exceptions within include files to
++ define necessary library symbols; they are noted "INFRINGES ON
++ USER NAME SPACE" below.
++
++Files: src/CXX/*
++Copyright: (c) 1998 - 2007 The Regents of the University of California
++License: BSD-3-with-notice
++ Redistribution and use in source and binary forms, with or without
++ modification, are permitted provided that the following conditions are met:
++ .
++ - Redistributions of source code must retain the above copyright notice, this
++ list of conditions and the disclaimer below.
++ - Redistributions in binary form must reproduce the above copyright notice,
++ this list of conditions and the disclaimer (as noted below) in the
++ documentation and/or materials provided with the distribution.
++ - Neither the name of the UC/LLNL nor the names of its contributors may be
++ used to endorse or promote products derived from this software without
++ specific prior written permission.
++ .
++ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
++ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OF THE UNIVERSITY OF CALIFORNIA,
++ THE U.S. DEPARTMENT OF ENERGY OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
++ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
++ BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ .
++ Additional BSD Notice
++ .
++ 1. This notice is required to be provided under our contract with the U.S.
++ Department of Energy (DOE). This work was produced at the University of
++ California, Lawrence Livermore National Laboratory under Contract No.
++ W-7405-ENG-48 with the DOE.
++ .
++ 2. Neither the United States Government nor the University of California
++ nor any of their employees, makes any warranty, express or implied, or
++ assumes any liability or responsibility for the accuracy, completeness,
++ or usefulness of any information, apparatus, product, or process disclosed,
++ or represents that its use would not infringe privately-owned rights.
++ .
++ 3. Also, reference herein to any specific commercial products, process, or
++ services by trade name, trademark, manufacturer or otherwise does not
++ necessarily constitute or imply its endorsement, recommendation, or
++ favoring by the United States Government or the University of California.
++ The views and opinions of authors expressed herein do not necessarily
++ state or reflect those of the United States Government or the University
++ of California, and shall not be used for advertising or product endorsement
++ purposes.
++
++Files: src/Gui/QSint/*
++Copyright: (c) QSint developers
++License: LGPL-3
++ On Debian systems, the complete text of the GNU Lesser General Public
++ License version 3 can be found in `/usr/share/common-licenses/LGPL-3'.
++
++License: LGPL-2.1+
++ On Debian systems, the complete text of the GNU Lesser General Public
++ License version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1'.
++
++License: LGPL-2.1
++ On Debian systems, the complete text of the GNU Lesser General Public
++ License version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1'.
++
++License: LGPL-2+
++ On Debian systems, the complete text of the GNU Lesser General Public
++ License version 2 can be found in `/usr/share/common-licenses/LGPL-2'.
--- /dev/null
--- /dev/null
++#!/usr/bin/dh-exec
++usr/share/doc/freecad-doc/ThirdPartyLibraries.html usr/share/freecad
++usr/share/freecad/Mod/*
++usr/share/freecad/Gui/*
++usr/share/freecad/Ext/*
++usr/share/freecad/share/icons/* usr/share/icons
++usr/share/freecad/share/thumbnailers/* usr/share/thumbnailers
++usr/share/freecad/3Dconnexion/*
--- /dev/null
--- /dev/null
++usr/share/freecad/ThirdPartyLibraries.html usr/share/doc/freecad-doc/ThirdPartyLibraries.html
++usr/share/freecad/Gui usr/lib/freecad/Gui
++usr/share/freecad/Mod usr/lib/freecad/Mod
++usr/share/freecad/Ext usr/lib/freecad/Ext
--- /dev/null
--- /dev/null
++# /usr/bin/freecad is a symlink, handled by update-alternatives, pointing at
++# /usr/lib/freecad/bin/freecad-python3
++desktop-command-not-in-package
--- /dev/null
--- /dev/null
++debian/freecad.1
--- /dev/null
--- /dev/null
++#!/usr/bin/dh-exec
++usr/share/freecad/bin/FreeCADCmd-Python3 => usr/lib/freecad/bin/freecadcmd-python3
++usr/share/freecad/bin/FreeCAD-Python3 => usr/lib/freecad/bin/freecad-python3
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++update-alternatives --install /usr/bin/freecad freecad /usr/lib/freecad/bin/freecad-python3 30 \
++ --slave /usr/bin/freecadcmd freecadcmd /usr/lib/freecad/bin/freecadcmd-python3 \
++ --slave /usr/lib/freecad/lib freecadlib /usr/lib/freecad-python3/lib
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++case "$1" in
++ remove|deconfigure)
++ update-alternatives --remove freecad /usr/lib/freecad/bin/freecad-python3
++ ;;
++
++ upgrade|failed-upgrade)
++ ;;
++
++ *)
++ echo "prerm called with unknown argument '$1'" >&2
++ exit 0
++ ;;
++esac
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++.\" Hey, EMACS: -*- nroff -*-
++.\" First parameter, NAME, should be all caps
++.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
++.\" other parameters are allowed: see man(7), man(1)
++.TH FREECAD 1 "March 22, 2019" freecad "Linux User's Manual"
++.\" Please adjust this date whenever revising the manpage.
++.\"
++.\" Some roff macros, for reference:
++.\" .nh disable hyphenation
++.\" .hy enable hyphenation
++.\" .ad l left justify
++.\" .ad b justify to both left and right margins
++.\" .nf disable filling
++.\" .fi enable filling
++.\" .br insert line break
++.\" .sp <n> insert n+1 empty lines
++.\" for manpage-specific macros, see man(7)
++.SH NAME
++freecad \- Extensible Open Source CAx program
++.SH SYNOPSIS
++.B freecad
++.RI [ options ] " files"
++.br
++.B freecadcmd
++.RI [ options ] " files"
++.SH DESCRIPTION
++.B FreeCAD
++is an Open Source CAx RAD based on OpenCasCade, Qt and Python. It features
++some key concepts like macro recording, workbenches, ability to run as a
++server and dynamically loadable application extensions and it is designed
++to be platform independent.
++.\" TeX users may be more comfortable with the \fB<whatever>\fP and
++.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
++.\" respectively.
++.SH USAGE
++\fBfreecad\fR starts with a GUI while \fBfreecadcmd\fR is only a pure command line version that starts a Python interpreter.
++.SH OPTIONS
++These programs follow the usual GNU command line syntax, with long
++options starting with two dashes (`-').
++A summary of the options supported by \fBfreecad\fR is included below.
++.SS "Generic options"
++.TP
++\fB\-c, \-\-console\fR
++Starts in console mode.
++.TP
++\fB\-\-dump\-config\fR
++Dumps configuration.
++.TP
++\fB\-\-get\-config\fR \fIarg\fR
++Prints the value of the requested configuration key.
++.TP
++\fB\-h, \-\-help\fR
++Prints help message.
++.TP
++\fB\-\-response\-file\fR \fIarg\fR
++Can be specified with '@name', too.
++.TP
++\fB\-v, \-\-version\fR
++Prints version string.
++
++.SS "Configuration"
++.TP
++\fB\-l, \-\-write\-log\fR
++Writes a log file to $HOME/.FreeCAD/FreeCAD.log
++.TP
++\fB\-\-log\-file\fR \fIarg\fR
++Unlike --write-log this allows logging to an arbitrary file.
++.TP
++\fB\-M, \-\-module\-path\fR \fIarg\fR
++Additional module paths.
++.TP
++\fB\-P, \-\-python\-path\fR \fIarg\fR
++Additional Python paths.
++.TP
++\fB\-s, \-\-system\-cfg\fR \fIarg\fR
++System config file to load/save system settings.
++.TP
++\fB\-\-single\-instance\fR
++Allow to run a single instance of the application.
++.TP
++\fB\-t, \-\-run\-test\fR \fIarg\fR
++Test case - or 0 for all.
++.TP
++\fB\-u, \-\-user\-cfg\fR \fIarg\fR
++User config file to load/save user settings.
++.SH SEE ALSO
++To get more information about \fBFreeCAD\fR, please visit \fIhttps://freecadweb.org\fR
++.SH BUGS
++To report a bug, please visit \fIhttps://freecadweb.org/tracker\fR
++.SH AUTHOR
++This manual page was written by Werner Mayer and Salman Mohammadi <salman@smoha.org>.
--- /dev/null
--- /dev/null
++src/Mod/Ship/resources/examples/*
--- /dev/null
--- /dev/null
++usr/share/freecad/share/applications/* usr/share/applications
++usr/share/freecad/share/metainfo/* usr/share/metainfo
++usr/share/freecad/share/mime/* usr/share/mime
--- /dev/null
--- /dev/null
++# FreeCAD is transitioning to a virtual package
++package-relation-with-self
--- /dev/null
--- /dev/null
++[DEFAULT]
++pristine-tar = True
++sign-tags = true
--- /dev/null
--- /dev/null
++usr/lib/freecad-python3/lib/*.so
--- /dev/null
--- /dev/null
++# False positive for pcre3
++embedded-library
--- /dev/null
--- /dev/null
++usr/share/freecad/share/pixmaps/freecad.xpm
--- /dev/null
--- /dev/null
++Description: Add several supported MIME types to deskto file.
++Author: Tobias Frost <tobi@debian.org>
++Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=993089
++Forwarded: not yet
++Last-Update: 2022-09-11 <YYYY-MM-DD, last update of the meta-information, optional>
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/src/XDGData/org.freecadweb.FreeCAD.desktop
+++++ b/src/XDGData/org.freecadweb.FreeCAD.desktop
++@@ -16,4 +16,4 @@
++ Icon=org.freecadweb.FreeCAD
++ Categories=Graphics;Science;Education;Engineering;
++ StartupNotify=true
++-MimeType=application/x-extension-fcstd;
+++MimeType=application/x-extension-fcstd;model/obj;model/iges;image/vnd.dwg;image/vnd.dxf;model/vnd.collada+xml;application/iges;model/iges;model/step;model/step+zip;model/stl;application/vnd.shp;model/vrml;
--- /dev/null
--- /dev/null
++Bug-Debian: https://bugs.debian.org/623560
++Author: Anton Gladky <gladky.anton@gmail.com>
++Last-Update: 2011-09-24
++Description: Disable memory-check in SMDS because sysinfo.h is not working
++ on BSD-systems and causes FTBFS. It is better to disable it only on
++ BSD-platforms.
++ Or use http://code.google.com/p/sysinfo-bsd/source/browse/sysinfo.c
++ for them.
++--- a/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp
+++++ b/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp
++@@ -61,13 +61,6 @@
++ #include <iterator>
++ using namespace std;
++
++-#ifndef WIN32
++-#if !(defined(__MACH__) && defined(__APPLE__))
++-#include <sys/sysinfo.h>
++-#endif
++-#include <sys/wait.h>
++-#endif
++-
++ // number of added entities to check memory after
++ #define CHECKMEMORY_INTERVAL 100000
++
++@@ -85,56 +78,7 @@
++
++ int SMDS_Mesh::CheckMemory(const bool doNotRaise)
++ {
++-#if 0
++-#if (defined(__MACH__) && defined(__APPLE__))
++- return 1000;
++-#else
++-#ifndef WIN32
++- struct sysinfo si;
++- int err = sysinfo( &si );
++- if ( err )
++- return -1;
++-
++- const unsigned long Mbyte = 1024 * 1024;
++-
++- static int limit = -1;
++- if ( limit < 0 ) {
++- int status = system("SMDS_MemoryLimit"); // it returns lower limit of free RAM
++- if (status >= 0 ) {
++- limit = WEXITSTATUS(status);
++- }
++- else {
++- double factor = ( si.totalswap == 0 ) ? 0.1 : 0.2;
++- limit = int(( factor * si.totalram * si.mem_unit ) / Mbyte );
++- }
++- if ( limit < 20 )
++- limit = 20;
++- else
++- limit = int ( limit * 1.5 );
++- MESSAGE ( "SMDS_Mesh::CheckMemory() memory limit = " << limit << " MB" );
++- }
++-
++- // compute separately to avoid overflow
++- int freeMb =
++- ( si.freeram * si.mem_unit ) / Mbyte +
++- ( si.freeswap * si.mem_unit ) / Mbyte;
++- //cout << "freeMb = " << freeMb << " limit = " << limit << endl;
++-
++- if ( freeMb > limit )
++- return freeMb - limit;
++-
++- if ( doNotRaise )
++- return 0;
++-
++- MESSAGE ("SMDS_Mesh::CheckMemory() throws as free memory too low: " << freeMb <<" MB" );
++- throw std::bad_alloc();
++-#else
++- return -1;
++-#endif
++-#endif
++-#else
++- return 1000;
++-#endif
+++ return 1000;
++ }
++
++ ///////////////////////////////////////////////////////////////////////////////
--- /dev/null
--- /dev/null
++Description: Do not include binary examples excluded via d/copyright
++Author: Anton Gladky <gladk@debian.org>
++Last-Update: 2018-06-10
++
++--- a/data/CMakeLists.txt
+++++ b/data/CMakeLists.txt
++@@ -1,9 +0,0 @@
++-add_subdirectory(examples)
++-
++-INSTALL(
++- FILES
++- License.txt
++- DESTINATION
++- ${CMAKE_INSTALL_DATADIR}
++-)
++-
++--- a/CMakeLists.txt
+++++ b/CMakeLists.txt
++@@ -85,7 +85,6 @@
++ SetGlobalCompilerAndLinkerSettings()
++
++ add_subdirectory(src)
++-add_subdirectory(data)
++
++ BuildAndInstallDesignerPlugin()
++
--- /dev/null
--- /dev/null
++Description: exclude ply from build-sources, use packaged version
++Author: Anton Gladky <gladk@debian.org>, Sebastian Hoogen <sebastian@hoogen.de>
++Last-Update: 2013-09-25
++
++--- a/src/Mod/OpenSCAD/CMakeLists.txt
+++++ b/src/Mod/OpenSCAD/CMakeLists.txt
++@@ -88,12 +88,6 @@
++
++ INSTALL(
++ FILES
++- ${ply_SRCS}
++- DESTINATION
++- Mod/OpenSCAD/ply
++-)
++-INSTALL(
++- FILES
++ ${OpenSCAD_SRCS}
++ ${OpenSCAD_QRC_SRCS}
++ DESTINATION
--- /dev/null
--- /dev/null
++Description: Fix FTBFS on armhf/armel, undefined GL_PROJECTION
++ This define is defined in GL/gl.h, so there must be some missing include
++ somewhere. This patch just adds the include…
++Author: tobi@debian.org
++Bug-Debian: https://bugs.debian.org/1014875
++Forwarded: no
++Last-Update: 2022-08-08 <YYYY-MM-DD, last update of the meta-information, optional>
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/src/Gui/Quarter/QuarterWidget.cpp
+++++ b/src/Gui/Quarter/QuarterWidget.cpp
++@@ -54,6 +54,11 @@
++
++ #include <cassert>
++
+++#include "config.h"
+++#ifdef HAVE_GL_GL_H
+++#include <GL/gl.h>
+++#endif
+++
++ #include <QAction>
++ #include <QApplication>
++ #include <QDebug>
--- /dev/null
--- /dev/null
++Description: Disable failing FEM test case TestSolverCalculix
++ The upstream bug tracker suggests that this is a problem with the test, as it seems
++ floats for the input are very similiar, only differing by the LSB.
++ .
++ This patch disables the test.
++Author: Tobias Frost <tobi@debian.org>
++Bug: https://github.com/FreeCAD/FreeCAD/issues/7188
++Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1017598
++Forwarded: not-needed, Debian specific.
++Last-Update: 2022-08-18 <YYYY-MM-DD, last update of the meta-information, optional>
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/src/Mod/Fem/femtest/app/test_solver_calculix.py
+++++ b/src/Mod/Fem/femtest/app/test_solver_calculix.py
++@@ -270,12 +270,13 @@
++ self.input_file_writing_test(get_namefromdef("test_"))
++
++ # ********************************************************************************************
++- def test_constraint_transform_torque(
++- self
++- ):
++- from femexamples.constraint_transform_torque import setup
++- setup(self.document, "calculix")
++- self.input_file_writing_test(get_namefromdef("test_"))
+++ # disabled, #1017598
+++ #def test_constraint_transform_torque(
+++ # self
+++ #):
+++ # from femexamples.constraint_transform_torque import setup
+++ # setup(self.document, "calculix")
+++ # self.input_file_writing_test(get_namefromdef("test_"))
++
++ # ********************************************************************************************
++ def test_frequency_beamsimple(
--- /dev/null
--- /dev/null
++Description: Don't include extra license file in package
++Author: Kurt Kremitzki <kkremitzki@gmail.com>
++Last-Update: 2018-06-13
++
++--- a/src/Mod/Idf/CMakeLists.txt
+++++ b/src/Mod/Idf/CMakeLists.txt
++@@ -6,7 +6,7 @@
++ SOURCE_GROUP("" FILES ${Idf_SRCS})
++
++ SET(IdfLibs_SRCS
++- Idflibs/License.txt
+++ #Idflibs/License.txt
++ Idflibs/0603_SMD.stp
++ Idflibs/0805_SMD.stp
++ Idflibs/1206_SMD.stp
--- /dev/null
--- /dev/null
++Description: Fix builds for OpenCASCADE >= 7.5.2
++Author: Kurt Kremitzki <kkremitzki@debian.org>
++Last-Updated: 2021-09-06
++
++--- a/src/Mod/Part/App/ShapeUpgrade/UnifySameDomainPyImp.cpp
+++++ b/src/Mod/Part/App/ShapeUpgrade/UnifySameDomainPyImp.cpp
++@@ -31,6 +31,9 @@
++ // Needed for OCCT 7.5.2
++ #include <TopoDS_Edge.hxx>
++
+++// Needed for OpenCASCADE >= 7.5.2
+++#include <TopoDS_Edge.hxx>
+++
++ #include "ShapeUpgrade/UnifySameDomainPy.h"
++ #include "ShapeUpgrade/UnifySameDomainPy.cpp"
++ #include "TopoShapePy.h"
--- /dev/null
--- /dev/null
++Description: Skip open_de9b3fb438 s390x to avoid OOM
++ The load of the current file in test_open_head is fine, but
++ open_de9b3fb438 goes into an OOM even in huge (e.g. 10GB) systemd.
++ This probably needs a proper fix by upstream in regard to the migration
++ modules that load the old code, but until then (since the rest works on s390x)
++ this unblocks the package self-test in Debian & Ubuntu.
++Forwarded: no
++X-Not-Forwarded-Reason: Unclear where/how exactly
++Author: Christian Ehrhardt <christian.ehrhardt@canonical.com>
++Origin: <todo-URL-to-git or similar>
++Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/freecad/+bug/1918474
++Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=984952
++Last-Update: 2021-03-15
++
++--- a/src/Mod/Fem/femtest/app/test_open.py
+++++ b/src/Mod/Fem/femtest/app/test_open.py
++@@ -25,6 +25,7 @@
++ __author__ = "Bernd Hahnebach"
++ __url__ = "https://www.freecadweb.org"
++
+++import platform
++ import sys
++ import tempfile
++ import unittest
++@@ -133,6 +134,10 @@
++ if sys.version_info.major < 3:
++ return
++
+++ # migration modules fail on s390x (big endian) and trigger OOMs (LP: #1918474)
+++ if platform.machine() == "s390x":
+++ return
+++
++ # the number in method name is the FreeCAD commit the document was created with
++ # https://github.com/FreeCAD/FreeCAD/commit/de9b3fb438
++ # the document was created by running the object create unit test
--- /dev/null
--- /dev/null
++Description: fix compilation on Armel due to coincident variables in
++ sys/ucontext.h (R2, R3, R4). Thanks to Paul Brook <paul@codesourcery.com>
++ http://lists.alioth.debian.org/pipermail/debian-science-maintainers/2011-October/009876.html
++Author: Anton Gladky <gladky.anton@gmail.com>
++Last-Update: 2011-10-27
++
++--- a/src/3rdParty/salomesmesh/inc/Rn.h
+++++ b/src/3rdParty/salomesmesh/inc/Rn.h
++@@ -31,7 +31,7 @@
++ #include <gp_Dir.hxx> //Dans OpenCascade
++
++ //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++-// BUT: Definir les espaces affines R R2 R3 R4 soit Rn pour n=1,2,3,4
+++// BUT: Definir les espaces affines R R_2 R_3 R_4 soit Rn pour n=1,2,3,4
++ //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ // AUTEUR : Frederic HECHT ANALYSE NUMERIQUE UPMC PARIS OCTOBRE 2000
++ // MODIFS : Alain PERRONNET ANALYSE NUMERIQUE UPMC PARIS NOVEMBRE 2000
++@@ -82,155 +82,155 @@
++ //==============
++ //typedef struct { short int x,y } XPoint; //en fait ce type est defini dans X11-Window
++ // #include <X11/Xlib.h>
++-//la classe R2
+++//la classe R_2
++ //============
++-class R2
+++class R_2
++ {
++- friend std::ostream& operator << (std::ostream& f, const R2 & P)
+++ friend std::ostream& operator << (std::ostream& f, const R_2 & P)
++ { f << P.x << ' ' << P.y ; return f; }
++- friend std::istream& operator >> (std::istream& f, R2 & P)
+++ friend std::istream& operator >> (std::istream& f, R_2 & P)
++ { f >> P.x >> P.y ; return f; }
++
++- friend std::ostream& operator << (std::ostream& f, const R2 * P)
+++ friend std::ostream& operator << (std::ostream& f, const R_2 * P)
++ { f << P->x << ' ' << P->y ; return f; }
++- friend std::istream& operator >> (std::istream& f, R2 * P)
+++ friend std::istream& operator >> (std::istream& f, R_2 * P)
++ { f >> P->x >> P->y ; return f; }
++
++ public:
++ R x,y; //les donnees
++
++- R2 () :x(0),y(0) {} //les constructeurs
++- R2 (R a,R b) :x(a),y(b) {}
++- R2 (R2 A,R2 B) :x(B.x-A.x),y(B.y-A.y) {} //vecteur defini par 2 points
++-
++- R2 operator+(R2 P) const {return R2(x+P.x,y+P.y);} // Q+P possible
++- R2 operator+=(R2 P) {x += P.x;y += P.y; return *this;}// Q+=P;
++- R2 operator-(R2 P) const {return R2(x-P.x,y-P.y);} // Q-P
++- R2 operator-=(R2 P) {x -= P.x;y -= P.y; return *this;} // Q-=P;
++- R2 operator-()const {return R2(-x,-y);} // -Q
++- R2 operator+()const {return *this;} // +Q
++- R operator,(R2 P)const {return x*P.x+y*P.y;} // produit scalaire (Q,P)
++- R operator^(R2 P)const {return x*P.y-y*P.x;} // produit vectoriel Q^P
++- R2 operator*(R c)const {return R2(x*c,y*c);} // produit a droite P*c
++- R2 operator*=(R c) {x *= c; y *= c; return *this;}
++- R2 operator/(R c)const {return R2(x/c,y/c);} // division par un reel
++- R2 operator/=(R c) {x /= c; y /= c; return *this;}
+++ R_2 () :x(0),y(0) {} //les constructeurs
+++ R_2 (R a,R b) :x(a),y(b) {}
+++ R_2 (R_2 A,R_2 B) :x(B.x-A.x),y(B.y-A.y) {} //vecteur defini par 2 points
+++
+++ R_2 operator+(R_2 P) const {return R_2(x+P.x,y+P.y);} // Q+P possible
+++ R_2 operator+=(R_2 P) {x += P.x;y += P.y; return *this;}// Q+=P;
+++ R_2 operator-(R_2 P) const {return R_2(x-P.x,y-P.y);} // Q-P
+++ R_2 operator-=(R_2 P) {x -= P.x;y -= P.y; return *this;} // Q-=P;
+++ R_2 operator-()const {return R_2(-x,-y);} // -Q
+++ R_2 operator+()const {return *this;} // +Q
+++ R operator,(R_2 P)const {return x*P.x+y*P.y;} // produit scalaire (Q,P)
+++ R operator^(R_2 P)const {return x*P.y-y*P.x;} // produit vectoriel Q^P
+++ R_2 operator*(R c)const {return R_2(x*c,y*c);} // produit a droite P*c
+++ R_2 operator*=(R c) {x *= c; y *= c; return *this;}
+++ R_2 operator/(R c)const {return R_2(x/c,y/c);} // division par un reel
+++ R_2 operator/=(R c) {x /= c; y /= c; return *this;}
++ R & operator[](int i) {return (&x)[i];} // la coordonnee i
++- R2 orthogonal() {return R2(-y,x);} //le vecteur orthogonal dans R2
++- friend R2 operator*(R c,R2 P) {return P*c;} // produit a gauche c*P
+++ R_2 orthogonal() {return R_2(-y,x);} //le vecteur orthogonal dans R_2
+++ friend R_2 operator*(R c,R_2 P) {return P*c;} // produit a gauche c*P
++ };
++
++
++-//la classe R3
+++//la classe R_3
++ //============
++-class R3
+++class R_3
++ {
++- friend std::ostream& operator << (std::ostream& f, const R3 & P)
+++ friend std::ostream& operator << (std::ostream& f, const R_3 & P)
++ { f << P.x << ' ' << P.y << ' ' << P.z ; return f; }
++- friend std::istream& operator >> (std::istream& f, R3 & P)
+++ friend std::istream& operator >> (std::istream& f, R_3 & P)
++ { f >> P.x >> P.y >> P.z ; return f; }
++
++- friend std::ostream& operator << (std::ostream& f, const R3 * P)
+++ friend std::ostream& operator << (std::ostream& f, const R_3 * P)
++ { f << P->x << ' ' << P->y << ' ' << P->z ; return f; }
++- friend std::istream& operator >> (std::istream& f, R3 * P)
+++ friend std::istream& operator >> (std::istream& f, R_3 * P)
++ { f >> P->x >> P->y >> P->z ; return f; }
++
++ public:
++ R x,y,z; //les 3 coordonnees
++
++- R3 () :x(0),y(0),z(0) {} //les constructeurs
++- R3 (R a,R b,R c):x(a),y(b),z(c) {} //Point ou Vecteur (a,b,c)
++- R3 (R3 A,R3 B):x(B.x-A.x),y(B.y-A.y),z(B.z-A.z) {} //Vecteur AB
++-
++- R3 (gp_Pnt P) : x(P.X()), y(P.Y()), z(P.Z()) {} //Point d'OpenCascade
++- R3 (gp_Vec V) : x(V.X()), y(V.Y()), z(V.Z()) {} //Vecteur d'OpenCascade
++- R3 (gp_Dir P) : x(P.X()), y(P.Y()), z(P.Z()) {} //Direction d'OpenCascade
++-
++- R3 operator+(R3 P)const {return R3(x+P.x,y+P.y,z+P.z);}
++- R3 operator+=(R3 P) {x += P.x; y += P.y; z += P.z; return *this;}
++- R3 operator-(R3 P)const {return R3(x-P.x,y-P.y,z-P.z);}
++- R3 operator-=(R3 P) {x -= P.x; y -= P.y; z -= P.z; return *this;}
++- R3 operator-()const {return R3(-x,-y,-z);}
++- R3 operator+()const {return *this;}
++- R operator,(R3 P)const {return x*P.x+y*P.y+z*P.z;} // produit scalaire
++- R3 operator^(R3 P)const {return R3(y*P.z-z*P.y ,P.x*z-x*P.z, x*P.y-y*P.x);} // produit vectoriel
++- R3 operator*(R c)const {return R3(x*c,y*c,z*c);}
++- R3 operator*=(R c) {x *= c; y *= c; z *= c; return *this;}
++- R3 operator/(R c)const {return R3(x/c,y/c,z/c);}
++- R3 operator/=(R c) {x /= c; y /= c; z /= c; return *this;}
+++ R_3 () :x(0),y(0),z(0) {} //les constructeurs
+++ R_3 (R a,R b,R c):x(a),y(b),z(c) {} //Point ou Vecteur (a,b,c)
+++ R_3 (R_3 A,R_3 B):x(B.x-A.x),y(B.y-A.y),z(B.z-A.z) {} //Vecteur AB
+++
+++ R_3 (gp_Pnt P) : x(P.X()), y(P.Y()), z(P.Z()) {} //Point d'OpenCascade
+++ R_3 (gp_Vec V) : x(V.X()), y(V.Y()), z(V.Z()) {} //Vecteur d'OpenCascade
+++ R_3 (gp_Dir P) : x(P.X()), y(P.Y()), z(P.Z()) {} //Direction d'OpenCascade
+++
+++ R_3 operator+(R_3 P)const {return R_3(x+P.x,y+P.y,z+P.z);}
+++ R_3 operator+=(R_3 P) {x += P.x; y += P.y; z += P.z; return *this;}
+++ R_3 operator-(R_3 P)const {return R_3(x-P.x,y-P.y,z-P.z);}
+++ R_3 operator-=(R_3 P) {x -= P.x; y -= P.y; z -= P.z; return *this;}
+++ R_3 operator-()const {return R_3(-x,-y,-z);}
+++ R_3 operator+()const {return *this;}
+++ R operator,(R_3 P)const {return x*P.x+y*P.y+z*P.z;} // produit scalaire
+++ R_3 operator^(R_3 P)const {return R_3(y*P.z-z*P.y ,P.x*z-x*P.z, x*P.y-y*P.x);} // produit vectoriel
+++ R_3 operator*(R c)const {return R_3(x*c,y*c,z*c);}
+++ R_3 operator*=(R c) {x *= c; y *= c; z *= c; return *this;}
+++ R_3 operator/(R c)const {return R_3(x/c,y/c,z/c);}
+++ R_3 operator/=(R c) {x /= c; y /= c; z /= c; return *this;}
++ R & operator[](int i) {return (&x)[i];}
++- friend R3 operator*(R c,R3 P) {return P*c;}
+++ friend R_3 operator*(R c,R_3 P) {return P*c;}
++
++- R3 operator=(gp_Pnt P) {return R3(P.X(),P.Y(),P.Z());}
++- R3 operator=(gp_Dir P) {return R3(P.X(),P.Y(),P.Z());}
+++ R_3 operator=(gp_Pnt P) {return R_3(P.X(),P.Y(),P.Z());}
+++ R_3 operator=(gp_Dir P) {return R_3(P.X(),P.Y(),P.Z());}
++
++- friend gp_Pnt gp_pnt(R3 xyz) { return gp_Pnt(xyz.x,xyz.y,xyz.z); }
+++ friend gp_Pnt gp_pnt(R_3 xyz) { return gp_Pnt(xyz.x,xyz.y,xyz.z); }
++ //friend gp_Pnt operator=() { return gp_Pnt(x,y,z); }
++- friend gp_Dir gp_dir(R3 xyz) { return gp_Dir(xyz.x,xyz.y,xyz.z); }
+++ friend gp_Dir gp_dir(R_3 xyz) { return gp_Dir(xyz.x,xyz.y,xyz.z); }
++
++- bool DansPave( R3 & xyzMin, R3 & xyzMax )
+++ bool DansPave( R_3 & xyzMin, R_3 & xyzMax )
++ { return xyzMin.x<=x && x<=xyzMax.x &&
++ xyzMin.y<=y && y<=xyzMax.y &&
++ xyzMin.z<=z && z<=xyzMax.z; }
++ };
++
++-//la classe R4
+++//la classe R_4
++ //============
++-class R4: public R3
+++class R_4: public R_3
++ {
++- friend std::ostream& operator <<(std::ostream& f, const R4 & P )
+++ friend std::ostream& operator <<(std::ostream& f, const R_4 & P )
++ { f << P.x << ' ' << P.y << ' ' << P.z << ' ' << P.omega; return f; }
++- friend std::istream& operator >>(std::istream& f, R4 & P)
+++ friend std::istream& operator >>(std::istream& f, R_4 & P)
++ { f >> P.x >> P.y >> P.z >> P.omega ; return f; }
++
++- friend std::ostream& operator <<(std::ostream& f, const R4 * P )
+++ friend std::ostream& operator <<(std::ostream& f, const R_4 * P )
++ { f << P->x << ' ' << P->y << ' ' << P->z << ' ' << P->omega; return f; }
++- friend std::istream& operator >>(std::istream& f, R4 * P)
+++ friend std::istream& operator >>(std::istream& f, R_4 * P)
++ { f >> P->x >> P->y >> P->z >> P->omega ; return f; }
++
++ public:
++ R omega; //la donnee du poids supplementaire
++
++- R4 () :omega(1.0) {} //les constructeurs
++- R4 (R a,R b,R c,R d):R3(a,b,c),omega(d) {}
++- R4 (R4 A,R4 B) :R3(B.x-A.x,B.y-A.y,B.z-A.z),omega(B.omega-A.omega) {}
++-
++- R4 operator+(R4 P)const {return R4(x+P.x,y+P.y,z+P.z,omega+P.omega);}
++- R4 operator+=(R4 P) {x += P.x;y += P.y;z += P.z;omega += P.omega;return *this;}
++- R4 operator-(R4 P)const {return R4(x-P.x,y-P.y,z-P.z,omega-P.omega);}
++- R4 operator-=(R4 P) {x -= P.x;y -= P.y;z -= P.z;omega -= P.omega;return *this;}
++- R4 operator-()const {return R4(-x,-y,-z,-omega);}
++- R4 operator+()const {return *this;}
++- R operator,(R4 P)const {return x*P.x+y*P.y+z*P.z+omega*P.omega;} // produit scalaire
++- R4 operator*(R c)const {return R4(x*c,y*c,z*c,omega*c);}
++- R4 operator*=(R c) {x *= c; y *= c; z *= c; omega *= c; return *this;}
++- R4 operator/(R c)const {return R4(x/c,y/c,z/c,omega/c);}
++- R4 operator/=(R c) {x /= c; y /= c; z /= c; omega /= c; return *this;}
+++ R_4 () :omega(1.0) {} //les constructeurs
+++ R_4 (R a,R b,R c,R d):R_3(a,b,c),omega(d) {}
+++ R_4 (R_4 A,R_4 B) :R_3(B.x-A.x,B.y-A.y,B.z-A.z),omega(B.omega-A.omega) {}
+++
+++ R_4 operator+(R_4 P)const {return R_4(x+P.x,y+P.y,z+P.z,omega+P.omega);}
+++ R_4 operator+=(R_4 P) {x += P.x;y += P.y;z += P.z;omega += P.omega;return *this;}
+++ R_4 operator-(R_4 P)const {return R_4(x-P.x,y-P.y,z-P.z,omega-P.omega);}
+++ R_4 operator-=(R_4 P) {x -= P.x;y -= P.y;z -= P.z;omega -= P.omega;return *this;}
+++ R_4 operator-()const {return R_4(-x,-y,-z,-omega);}
+++ R_4 operator+()const {return *this;}
+++ R operator,(R_4 P)const {return x*P.x+y*P.y+z*P.z+omega*P.omega;} // produit scalaire
+++ R_4 operator*(R c)const {return R_4(x*c,y*c,z*c,omega*c);}
+++ R_4 operator*=(R c) {x *= c; y *= c; z *= c; omega *= c; return *this;}
+++ R_4 operator/(R c)const {return R_4(x/c,y/c,z/c,omega/c);}
+++ R_4 operator/=(R c) {x /= c; y /= c; z /= c; omega /= c; return *this;}
++ R & operator[](int i) {return (&x)[i];}
++- friend R4 operator*(R c,R4 P) {return P*c;}
+++ friend R_4 operator*(R c,R_4 P) {return P*c;}
++ };
++
++ //quelques fonctions supplementaires sur ces classes
++ //==================================================
++-inline R Aire2d(const R2 A,const R2 B,const R2 C){return (B-A)^(C-A);}
++-inline R Angle2d(R2 P){ return atan2(P.y,P.x);}
+++inline R Aire2d(const R_2 A,const R_2 B,const R_2 C){return (B-A)^(C-A);}
+++inline R Angle2d(R_2 P){ return atan2(P.y,P.x);}
++
++-inline R Norme2_2(const R2 & A){ return (A,A);}
++-inline R Norme2(const R2 & A){ return sqrt((A,A));}
++-inline R NormeInfinie(const R2 & A){return Max(Abs(A.x),Abs(A.y));}
++-
++-inline R Norme2_2(const R3 & A){ return (A,A);}
++-inline R Norme2(const R3 & A){ return sqrt((A,A));}
++-inline R NormeInfinie(const R3 & A){return Max(Abs(A.x),Abs(A.y),Abs(A.z));}
++-
++-inline R Norme2_2(const R4 & A){ return (A,A);}
++-inline R Norme2(const R4 & A){ return sqrt((A,A));}
++-inline R NormeInfinie(const R4 & A){return Max(Abs(A.x),Abs(A.y),Abs(A.z),Abs(A.omega));}
++-
++-inline R2 XY(R3 P) {return R2(P.x, P.y);} //restriction a R2 d'un R3 par perte de z
++-inline R3 Min(R3 P, R3 Q)
++-{return R3(P.x<Q.x ? P.x : Q.x, P.y<Q.y ? P.y : Q.y, P.z<Q.z ? P.z : Q.z);} //Pt de xyz Min
++-inline R3 Max(R3 P, R3 Q)
++-{return R3(P.x>Q.x ? P.x : Q.x, P.y>Q.y ? P.y : Q.y, P.z>Q.z ? P.z : Q.z);} //Pt de xyz Max
+++inline R Norme2_2(const R_2 & A){ return (A,A);}
+++inline R Norme2(const R_2 & A){ return sqrt((A,A));}
+++inline R NormeInfinie(const R_2 & A){return Max(Abs(A.x),Abs(A.y));}
+++
+++inline R Norme2_2(const R_3 & A){ return (A,A);}
+++inline R Norme2(const R_3 & A){ return sqrt((A,A));}
+++inline R NormeInfinie(const R_3 & A){return Max(Abs(A.x),Abs(A.y),Abs(A.z));}
+++
+++inline R Norme2_2(const R_4 & A){ return (A,A);}
+++inline R Norme2(const R_4 & A){ return sqrt((A,A));}
+++inline R NormeInfinie(const R_4 & A){return Max(Abs(A.x),Abs(A.y),Abs(A.z),Abs(A.omega));}
+++
+++inline R_2 XY(R_3 P) {return R_2(P.x, P.y);} //restriction a R_2 d'un R_3 par perte de z
+++inline R_3 Min(R_3 P, R_3 Q)
+++{return R_3(P.x<Q.x ? P.x : Q.x, P.y<Q.y ? P.y : Q.y, P.z<Q.z ? P.z : Q.z);} //Pt de xyz Min
+++inline R_3 Max(R_3 P, R_3 Q)
+++{return R_3(P.x>Q.x ? P.x : Q.x, P.y>Q.y ? P.y : Q.y, P.z>Q.z ? P.z : Q.z);} //Pt de xyz Max
++
++ #endif
++--- a/src/3rdParty/salomesmesh/inc/StdMeshers_MEFISTO_2D.hxx
+++++ b/src/3rdParty/salomesmesh/inc/StdMeshers_MEFISTO_2D.hxx
++@@ -64,7 +64,7 @@
++ typedef std::vector< StdMeshers_FaceSidePtr > TWireVector;
++
++ bool LoadPoints(TWireVector & wires,
++- R2* uvslf,
+++ R_2* uvslf,
++ std::vector< const SMDS_MeshNode*>& mefistoToDS,
++ double scalex, double scaley);
++
++@@ -73,7 +73,7 @@
++ double& scalex,
++ double& scaley);
++
++- void StoreResult (Z nbst, R2* uvst, Z nbt, Z* nust,
+++ void StoreResult (Z nbst, R_2* uvst, Z nbt, Z* nust,
++ std::vector< const SMDS_MeshNode*>& mefistoToDS,
++ double scalex, double scaley);
++
++--- a/src/3rdParty/salomesmesh/inc/aptrte.h
+++++ b/src/3rdParty/salomesmesh/inc/aptrte.h
++@@ -60,9 +60,9 @@
++
++ MEFISTO2D_EXPORT
++ void aptrte( Z nutysu, R aretmx,
++- Z nblf, Z *nudslf, R2 *uvslf,
++- Z nbpti, R2 *uvpti,
++- Z & nbst, R2 * & uvst, Z & nbt, Z * & nust,
+++ Z nblf, Z *nudslf, R_2 *uvslf,
+++ Z nbpti, R_2 *uvpti,
+++ Z & nbst, R_2 * & uvst, Z & nbt, Z * & nust,
++ Z & ierr );
++ //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ // but : appel de la triangulation par un arbre-4 recouvrant
++@@ -123,7 +123,7 @@
++ #define tesuex TESUEX
++ #define teamqt TEAMQT
++ #define nusotr NUSOTR
++- #define qutr2d QUTR2D
+++ #define qutr2d QUTR_2D
++ #define surtd2 SURTD2
++ #define qualitetrte QUALITETRTE
++
++@@ -160,7 +160,7 @@
++ __stdcall
++ #endif
++ #endif
++- qualitetrte( R3 *mnpxyd,
+++ qualitetrte( R_3 *mnpxyd,
++ Z & mosoar, Z & mxsoar, Z *mnsoar,
++ Z & moartr, Z & mxartr, Z *mnartr,
++ Z & nbtria, R & quamoy, R & quamin ); }
++@@ -301,7 +301,7 @@
++ __stdcall
++ #endif
++ #endif
++- teajte( Z & mxsomm, Z & nbsomm, R3 * mnpxyd, R3 * comxmi,
+++ teajte( Z & mxsomm, Z & nbsomm, R_3 * mnpxyd, R_3 * comxmi,
++ R & aretmx, Z & mxtree, Z * letree,
++ Z & ierr );
++ }
++@@ -313,8 +313,8 @@
++ __stdcall
++ #endif
++ #endif
++- tehote( Z & nutysu, Z & nbarpi, Z & mxsomm, Z & nbsomm, R3 * mnpxyd,
++- R3 * comxmi, R & aretmx,
+++ tehote( Z & nutysu, Z & nbarpi, Z & mxsomm, Z & nbsomm, R_3 * mnpxyd,
+++ R_3 * comxmi, R & aretmx,
++ Z * letree, Z & mxqueu, Z * mnqueu,
++ Z & ierr );
++ }
++@@ -328,7 +328,7 @@
++ __stdcall
++ #endif
++ #endif
++- tetrte( R3 * comxmi, R & aretmx, Z & nbarpi, Z & mxsomm, R3 * mnpxyd,
+++ tetrte( R_3 * comxmi, R & aretmx, Z & nbarpi, Z & mxsomm, R_3 * mnpxyd,
++ Z & mxqueu, Z * mnqueu, Z * mntree,
++ Z & mosoar, Z & mxsoar, Z & n1soar, Z * mnsoar,
++ Z & moartr, Z & mxartr, Z & n1artr, Z * mnartr, Z * mnarst,
++@@ -355,7 +355,7 @@
++ __stdcall
++ #endif
++ #endif
++- tedela( R3 * mnpxyd, Z * mnarst,
+++ tedela( R_3 * mnpxyd, Z * mnarst,
++ Z & mosoar, Z & mxsoar, Z & n1soar, Z * mnsoar, Z & na,
++ Z & moartr, Z & mxartr, Z & n1artr, Z * mnartr, Z & n );
++ }
++@@ -369,7 +369,7 @@
++ __stdcall
++ #endif
++ #endif
++- terefr( Z & nbarpi, R3 * mnpxyd,
+++ terefr( Z & nbarpi, R_3 * mnpxyd,
++ Z & mosoar, Z & mxsoar, Z & n1soar, Z * mnsoar,
++ Z & moartr, Z & mxartr, Z & n1artr, Z * mnartr, Z * mnarst,
++ Z & mxarcf, Z * mnarc1, Z * mnarc2,
++@@ -387,7 +387,7 @@
++ #endif
++ #endif
++ tesuex( Z & nblf, Z * nulftr,
++- Z & ndtri0, Z & nbsomm, R3 * mnpxyd, Z * mnslig,
+++ Z & ndtri0, Z & nbsomm, R_3 * mnpxyd, Z * mnslig,
++ Z & mosoar, Z & mxsoar, Z * mnsoar,
++ Z & moartr, Z & mxartr, Z & n1artr, Z * mnartr, Z * mnarst,
++ Z & nbtria, Z * mntrsu, Z & ierr );
++@@ -407,7 +407,7 @@
++ Z & mxarcf, Z * mntrcf, Z * mnstbo,
++ Z * n1arcf, Z * mnarcf, Z * mnarc1,
++ Z & nbarpi, Z & nbsomm, Z & mxsomm,
++- R3 * mnpxyd, Z * mnslig,
+++ R_3 * mnpxyd, Z * mnslig,
++ Z & ierr );
++ }
++ // amelioration de la qualite de la triangulation par
++@@ -434,7 +434,7 @@
++ __stdcall
++ #endif
++ #endif
++- qutr2d( R3 & p1, R3 & p2, R3 & p3, R & qualite );
+++ qutr2d( R_3 & p1, R_3 & p2, R_3 & p3, R & qualite );
++ }
++ //calculer la qualite d'un triangle de R2 de sommets p1, p2, p3
++
++@@ -445,7 +445,7 @@
++ __stdcall
++ #endif
++ #endif
++- surtd2( R3 & p1, R3 & p2, R3 & p3 );
+++ surtd2( R_3 & p1, R_3 & p2, R_3 & p3 );
++ }
++ //calcul de la surface d'un triangle defini par 3 points de r**2
++
++--- a/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp
+++++ b/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp
++@@ -88,9 +88,9 @@
++
++
++ void aptrte( Z nutysu, R aretmx,
++- Z nblf, Z * nudslf, R2 * uvslf,
++- Z nbpti, R2 * uvpti,
++- Z & nbst, R2 * & uvst,
+++ Z nblf, Z * nudslf, R_2 * uvslf,
+++ Z nbpti, R_2 * uvpti,
+++ Z & nbst, R_2 * & uvst,
++ Z & nbt, Z * & nust,
++ Z & ierr )
++ //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++@@ -142,11 +142,11 @@
++ //no st1, st2, st3, 0 (non quadrangle)
++
++ R d, tcpu=0;
++-// R3 direction=R3(0,0,0); //direction pour areteideale() inactive ici!
+++// R_3 direction=R_3(0,0,0); //direction pour areteideale() inactive ici!
++ Z nbarfr=nudslf[nblf]; //nombre total d'aretes des lignes fermees
++ Z mxtrou = Max( 1024, nblf ); //nombre maximal de trous dans la surface
++
++- R3 *mnpxyd=NULL;
+++ R_3 *mnpxyd=NULL;
++ Z *mnsoar=NULL, mosoar=7, mxsoar, n1soar; //le hachage des aretes
++ Z *mnartr=NULL, moartr=3, mxartr, n1artr; //le no des 3 aretes des triangles
++ Z *mntree=NULL, motree=9, mxtree; //L'arbre 4 de TE et nombre d'entiers par TE
++@@ -161,7 +161,7 @@
++ Z *mnarst=NULL;
++ Z *mnlftr=NULL;
++
++- R3 comxmi[2]; //coordonnees UV Min et Maximales
+++ R_3 comxmi[2]; //coordonnees UV Min et Maximales
++ R aremin, aremax; //longueur minimale et maximale des aretes
++ R airemx; //aire maximale souhaitee d'un triangle
++ R quamoy, quamin;
++@@ -191,7 +191,7 @@
++ NEWDEPART:
++ //mnpxyd( 3, mxsomm ) les coordonnees UV des sommets et la taille d'arete aux sommets
++ if( mnpxyd!=NULL ) delete [] mnpxyd;
++- mnpxyd = new R3[mxsomm];
+++ mnpxyd = new R_3[mxsomm];
++ if( mnpxyd==NULL ) goto ERREUR;
++
++ // le tableau mnsoar des aretes des triangles
++@@ -655,7 +655,7 @@
++ // generation du tableau uvst de la surface triangulee
++ // ---------------------------------------------------
++ if( uvst != NULL ) delete [] uvst;
++- uvst = new R2[nbst];
+++ uvst = new R_2[nbst];
++ if( uvst == NULL ) goto ERREUR;
++
++ nbst=-1;
++@@ -761,7 +761,7 @@
++ __stdcall
++ #endif
++ #endif
++- qualitetrte( R3 *mnpxyd,
+++ qualitetrte( R_3 *mnpxyd,
++ Z & mosoar, Z & mxsoar, Z *mnsoar,
++ Z & moartr, Z & mxartr, Z *mnartr,
++ Z & nbtria, R & quamoy, R & quamin )
++--- a/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_MEFISTO_2D.cpp
+++++ b/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_MEFISTO_2D.cpp
++@@ -234,12 +234,12 @@
++
++ Z nblf; //nombre de lignes fermees (enveloppe en tete)
++ Z *nudslf = NULL; //numero du dernier sommet de chaque ligne fermee
++- R2 *uvslf = NULL;
+++ R_2 *uvslf = NULL;
++ Z nbpti = 0; //nombre points internes futurs sommets de la triangulation
++- R2 *uvpti = NULL;
+++ R_2 *uvpti = NULL;
++
++ Z nbst;
++- R2 *uvst = NULL;
+++ R_2 *uvst = NULL;
++ Z nbt;
++ Z *nust = NULL;
++ Z ierr = 0;
++@@ -264,7 +264,7 @@
++ nudslf[iw++] = nbpnt;
++ }
++
++- uvslf = new R2[nudslf[nblf]];
+++ uvslf = new R_2[nudslf[nblf]];
++
++ double scalex, scaley;
++ ComputeScaleOnFace(aMesh, F, scalex, scaley);
++@@ -390,7 +390,7 @@
++ //purpose : prevent failure due to overlapped adjacent links
++ //=======================================================================
++
++-static bool fixOverlappedLinkUV( R2& uv0, const R2& uv1, const R2& uv2 )
+++static bool fixOverlappedLinkUV( R_2& uv0, const R_2& uv1, const R_2& uv2 )
++ {
++ gp_XY v1( uv0.x - uv1.x, uv0.y - uv1.y );
++ gp_XY v2( uv2.x - uv1.x, uv2.y - uv1.y );
++@@ -441,7 +441,7 @@
++ //purpose :
++ //=======================================================================
++
++-static bool fixCommonVertexUV (R2 & theUV,
+++static bool fixCommonVertexUV (R_2 & theUV,
++ const TopoDS_Vertex& theV,
++ const TopoDS_Face& theF,
++ const TopTools_IndexedDataMapOfShapeListOfShape & theVWMap,
++@@ -540,7 +540,7 @@
++ nextUV = uv;
++ }
++ }
++- R2 uv0, uv1, uv2;
+++ R_2 uv0, uv1, uv2;
++ uv0.x = thisUV.X(); uv0.y = thisUV.Y();
++ uv1.x = nextUV.X(); uv1.y = nextUV.Y();
++ uv2.x = thisUV.X(); uv2.y = thisUV.Y();
++@@ -574,7 +574,7 @@
++ //=============================================================================
++
++ bool StdMeshers_MEFISTO_2D::LoadPoints(TWireVector & wires,
++- R2 * uvslf,
+++ R_2 * uvslf,
++ vector<const SMDS_MeshNode*>& mefistoToDS,
++ double scalex,
++ double scaley)
++@@ -782,7 +782,7 @@
++ */
++ //=============================================================================
++
++-void StdMeshers_MEFISTO_2D::StoreResult(Z nbst, R2 * uvst, Z nbt, Z * nust,
+++void StdMeshers_MEFISTO_2D::StoreResult(Z nbst, R_2 * uvst, Z nbt, Z * nust,
++ vector< const SMDS_MeshNode*>&mefistoToDS,
++ double scalex, double scaley)
++ {
--- /dev/null
--- /dev/null
++Description: Fixes GCC8 FTBFS due to included copy of SMESH.
++Author: Kurt Kremitzki <kurt@kwk.systems>
++Last-Updated: 2018-08-10
++--- a/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx
+++++ b/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx
++@@ -221,8 +221,8 @@
++ // WARNING: this comparator makes impossible to store both nodes and elements in the same set
++ // because there are nodes and elements with the same ID. Use TIDTypeCompare for such containers.
++ struct TIDCompare {
++- bool operator () (const SMDS_MeshElement* e1, const SMDS_MeshElement* e2) const
++- { return e1->GetID() < e2->GetID(); }
+++ template<typename T> bool operator () (const T* e1, const T* e2) const
+++ { return static_cast<const SMDS_MeshElement*>(e1)->GetID() < static_cast<const SMDS_MeshElement*>(e2)->GetID(); }
++ };
++
++ #endif
--- /dev/null
--- /dev/null
++Description: Fix compilation against vtk9
++Author: wmayer <wmayer@users.sourceforge.net>
++Origin: https://github.com/wwmayer/FreeCAD/commit/bb9bcbd51df7c3cb76c5823038e4ea0f7e25a9ff
++Last-Update: 2021-09-23
++
++Index: freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp
++===================================================================
++--- freecad.orig/src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp
+++++ freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp
++@@ -360,6 +360,7 @@ void SMDS_UnstructuredGrid::copyBloc(vtk
++ newLocations->SetValue(alreadyCopied, newLoc);
++ alreadyCopied++;
++ }
+++#endif
++ }
++
++ int SMDS_UnstructuredGrid::CellIdToDownId(int vtkCellId)
++Index: freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp
++===================================================================
++--- freecad.orig/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp
+++++ freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp
++@@ -100,6 +100,19 @@ bool SMDS_VtkEdge::ChangeNodes(const SMD
++ bool SMDS_VtkEdge::IsMediumNode(const SMDS_MeshNode* node) const
++ {
++ vtkUnstructuredGrid* grid = SMDS_Mesh::_meshList[myMeshId]->getGrid();
+++#ifdef VTK_CELL_ARRAY_V2
+++ vtkNew<vtkIdList> cellPoints;
+++ grid->GetCellPoints(myVtkID, cellPoints.GetPointer());
+++ if (nbNodes != cellPoints->GetNumberOfIds())
+++ {
+++ MESSAGE("ChangeNodes problem: not the same number of nodes " << cellPoints->GetNumberOfIds() << " -> " << nbNodes);
+++ return false;
+++ }
+++ for (int i = 0; i < nbNodes; i++)
+++ {
+++ cellPoints->SetId(i, nodes[i]->getVtkId());
+++ }
+++#else
++ vtkIdType npts = 0;
++ vtkIdTypePtr pts = 0;
++ grid->GetCellPoints(myVtkID, npts, pts);
++Index: freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp
++===================================================================
++--- freecad.orig/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp
+++++ freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp
++@@ -379,7 +379,7 @@ void SMDS_VtkFace::ChangeApex(SMDS_MeshN
++ cellPoints->SetId(0, node->getVtkId());
++ #else
++ vtkIdType npts = 0;
++- vtkIdType* pts = 0;
+++ vtkIdTypePtr pts = 0;
++ grid->GetCellPoints(myVtkID, npts, pts);
++ grid->RemoveReferenceToCell(pts[0], myVtkID);
++ pts[0] = node->getVtkId();
++Index: freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp
++===================================================================
++--- freecad.orig/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp
+++++ freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp
++@@ -147,7 +147,7 @@ bool SMDS_VtkVolume::ChangeNodes(const S
++ }
++ #else
++ vtkIdType npts = 0;
++- vtkIdType* pts = 0;
+++ vtkIdTypePtr pts = 0;
++ grid->GetCellPoints(myVtkID, npts, pts);
++ if (nbNodes != npts)
++ {
--- /dev/null
--- /dev/null
++Description: Use int instead of deprecated `np.int`
++Author: Kurt Kremitzki <kkremitzki@debian.org
++Last-Update: 2023-01-23
++
++--- a/src/Mod/Fem/femmesh/meshtools.py
+++++ b/src/Mod/Fem/femmesh/meshtools.py
++@@ -485,7 +485,7 @@
++ # fem_objects = FreeCAD FEM document objects
++ # get femelements for reference shapes of each obj.References
++ count_femelements = 0
++- referenced_femelements = np.zeros((max(femelement_table.keys())+1,),dtype=np.int)
+++ referenced_femelements = np.zeros((max(femelement_table.keys())+1,),dtype=int)
++ has_remaining_femelements = None
++ for fem_object_i, fem_object in enumerate(fem_objects):
++ obj = fem_object["Object"]
--- /dev/null
--- /dev/null
++Description: Fix break caused by hidden dependency on 3rd party library (OpenCASCADE) "using namespace std"
++Author: Kurt Kremitzki <kkremitzki@debian.org>
++Last-Updated: 2021-09-06
++
++--- a/src/Mod/Raytracing/App/RayFeature.cpp
+++++ b/src/Mod/Raytracing/App/RayFeature.cpp
++@@ -82,19 +82,19 @@
++ // This must not be done in PovTools::writeShape!\r
++ long t = Transparency.getValue();\r
++ const App::Color& c = Color.getValue();\r
++- result << "// instance to render" << endl\r
++- << "object {" << Name << endl\r
++- << " texture {" << endl;\r
+++ result << "// instance to render" << std::endl\r
+++ << "object {" << Name << std::endl\r
+++ << " texture {" << std::endl;\r
++ if (t == 0) {\r
++- result << " pigment {color rgb <"<<c.r<<","<<c.g<<","<<c.b<<">}" << endl;\r
+++ result << " pigment {color rgb <"<<c.r<<","<<c.g<<","<<c.b<<">}" << std::endl;\r
++ }\r
++ else {\r
++ float trans = t/100.0f;\r
++- result << " pigment {color rgb <"<<c.r<<","<<c.g<<","<<c.b<<"> transmit "<<trans<<"}" << endl;\r
+++ result << " pigment {color rgb <"<<c.r<<","<<c.g<<","<<c.b<<"> transmit "<<trans<<"}" << std::endl;\r
++ }\r
++- result << " finish {StdFinish } //definition on top of the project" << endl\r
++- << " }" << endl\r
++- << "}" << endl ;\r
+++ result << " finish {StdFinish } //definition on top of the project" << std::endl\r
+++ << " }" << std::endl\r
+++ << "}" << std::endl ;\r
++ \r
++ // Apply the resulting fragment\r
++ Result.setValue(result.str().c_str());\r
--- /dev/null
--- /dev/null
++--- a/src/Mod/Test/TestPythonSyntax.py
+++++ b/src/Mod/Test/TestPythonSyntax.py
++@@ -58,9 +58,11 @@
++ """
++ def setUp(self):
++ self.whitelist = []
+++ self.whitelist += ["ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf.py"]
++ self.whitelist += ["automotive_design.py"]
++ self.whitelist += ["ifc2x3.py"]
++ self.whitelist += ["ifc4.py"]
+++ self.whitelist += ["__exec_old.py"]
++
++
++ def testAll(self):
--- /dev/null
--- /dev/null
++Description: Single instance of application.
++Author: Håvard Flaget Aasen <haavard_aasen@yahoo.no>
++Forwarded: no
++Last-Update: 2021-12-26
++---
++--- a/src/XDGData/org.freecadweb.FreeCAD.desktop
+++++ b/src/XDGData/org.freecadweb.FreeCAD.desktop
++@@ -10,7 +10,7 @@
++ GenericName[de]=CAD-Anwendung
++ GenericName[pl]=Aplikacja CAD
++ GenericName[ru]=Система автоматизированного проектирования
++-Exec=FreeCAD %F
+++Exec=/usr/bin/freecad - --single-instance %F
++ Terminal=false
++ Type=Application
++ Icon=org.freecadweb.FreeCAD
--- /dev/null
--- /dev/null
++fix-occt-7.5.2.patch
++opencascade74.patch
++fix_gcc8_ftbfs.patch
++fix_armel_FTBFS.patch
++fix-cmake-extra-license.patch
++do_not_install_binary_examples.patch
++exclude_ply.patch
++disable_memory_check.patch
++#python3.8.patch
++python3.8-syntax.diff
++fix-s390x-test-fail-skip-load-old-file.patch
++run_single-instance.patch
++fix-1014875-arm-FTBFS.patch
++fix-1017598.patch
++bug-993089-dxf-support-desktop-file.patch
++numpy-1.24.patch
--- /dev/null
--- /dev/null
++#!/usr/bin/make -f
++%:
++ dh $@ --buildsystem=cmake --with python3
++
++DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
++DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)
++export DEB_BUILD_MAINT_OPTIONS = hardening=+all,+bindnow
++
++CPPFLAGS:=$(shell dpkg-buildflags --get CPPFLAGS) -Wall -fpermissive
++CFLAGS:=$(shell dpkg-buildflags --get CFLAGS) $(CPPFLAGS) -flto
++CXXFLAGS:=$(shell dpkg-buildflags --get CXXFLAGS) $(CPPFLAGS) -I/usr/include/python$(shell py3versions -d -v) -flto
++LDFLAGS:=$(shell dpkg-buildflags --get LDFLAGS) -Wl,--as-needed -Wl,-flto
++
++py3ver = $(shell py3versions -d -v | tr -d .)
++ifeq (1,$(shell expr ${py3ver} \< 38 ))
++ py3ver := $(py3ver)m
++endif
++
++extra_flags += \
++-DBUILD_QT5=ON \
++-DBUILD_FLAT_MESH=ON \
++-DFREECAD_BUILD_DEBIAN=ON \
++-DFREECAD_USE_PYBIND11=ON \
++-DCMAKE_CXX_FLAGS="$(CXXFLAGS)" \
++-DCMAKE_C_FLAGS="$(CFLAGS)" \
++-DCMAKE_SHARED_LINKER_FLAGS="$(LDFLAGS)" \
++-DLIB_SUFFIX="" \
++-DCMAKE_BUILD_TYPE=RelWithDebInfo \
++-DCMAKE_INSTALL_DATADIR="/usr/share/freecad" \
++-DCMAKE_INSTALL_DOCDIR="/usr/share/doc/freecad-doc" \
++-DCMAKE_INSTALL_PREFIX="/usr/share/freecad" \
++-DPYTHON_CONFIG_SUFFIX=".cpython-$(py3ver)-$(DEB_HOST_MULTIARCH)"
++
++py3_flags = \
++-DPYTHON_EXECUTABLE="/usr/bin/python3" \
++-DCMAKE_INSTALL_LIBDIR="/usr/lib/freecad-python3/lib"
++
++override_dh_auto_configure:
++ dh_auto_configure --builddirectory=debian/build-py3 -- \
++ $(extra_flags) \
++ $(py3_flags)
++
++override_dh_auto_build:
++ dh_auto_build --builddirectory=debian/build-py3
++
++override_dh_auto_test:
++ dh_auto_test --builddirectory=debian/build-py3
++
++override_dh_auto_install:
++ dh_auto_install --builddirectory=debian/build-py3
++ mv debian/tmp/usr/share/freecad/bin/FreeCADCmd \
++ debian/tmp/usr/share/freecad/bin/FreeCADCmd-Python3
++ mv debian/tmp/usr/share/freecad/bin/FreeCAD \
++ debian/tmp/usr/share/freecad/bin/FreeCAD-Python3
++
++override_dh_compress:
++ dh_compress -X.qch -X.qhc
++
++override_dh_installchangelogs:
++ dh_installchangelogs ChangeLog.txt
++
++override_dh_installexamples:
++
++override_dh_missing:
++ dh_missing --list-missing
++
++override_dh_auto_clean:
++ dh_auto_clean
++ rm -rf debian/build-py3 $$(find . -name __pycache__ -type d)
--- /dev/null
--- /dev/null
++---
++include:
++ - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/salsa-ci.yml
++ - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/pipeline-jobs.yml
--- /dev/null
--- /dev/null
++#!/bin/bash
++
++# The script creates a tar.xz tarball from git-repository of freecad-project
++# ./get_orig_src.sh commitID - creates a tarball of specified commit
++# ./get_orig_src.sh - creates a tarball of the latest version
++# Packages, that needs to be installed to use the script:
++# atool, git-core
++
++set -e
++
++git clone git://free-cad.git.sourceforge.net/gitroot/free-cad/free-cad git_temp_packaging
++
++cd git_temp_packaging
++
++if [ $1 ]
++then
++ echo 'Checking out the revision ' $1
++ git checkout -b newvers $1
++else
++ echo 'Using the latest revision'
++fi
++
++GIT_CMT_COUNT=$(git rev-list HEAD | wc -l)
++
++DEB_VER=0.13.$GIT_CMT_COUNT-dfsg
++FOLDER_NAME=freecad-$DEB_VER
++TARBALL_NAME=freecad_$DEB_VER.orig.tar.xz
++
++echo $DEB_VER
++echo $FOLDER_NAME
++echo $TARBALL_NAME
++
++python src/Tools/SubWCRev.py
++
++cd ..
++
++rm -fr $FOLDER_NAME
++
++mv git_temp_packaging $FOLDER_NAME
++rm -rf $FOLDER_NAME/.git
++rm -rf $FOLDER_NAME/src/3rdParty/CxImage
++rm -rf $FOLDER_NAME/src/3rdParty/Pivy
++rm -rf $FOLDER_NAME/src/3rdParty/Pivy-0.5
++rm -rf $FOLDER_NAME/src/3rdParty/ANN/doc/ANNmanual.pdf
++rm -rf $FOLDER_NAME/src/Mod/Ship/simRun/theory/main.pdf
++rm -rf $FOLDER_NAME/src/Mod/Mod/Robot/Lib/Kuka/*.pdf
++rm -rf $FOLDER_NAME/src/Doc/TiddlySaver.jar
++rm -rf $FOLDER_NAME/data/examples/*.FCStd
++
++
++tar Jcvf $TARBALL_NAME $FOLDER_NAME
++
++rm -fr $FOLDER_NAME
--- /dev/null
--- /dev/null
++3.0 (quilt)
--- /dev/null
--- /dev/null
++# The following file is an icon from the Tango Desktop Project, licensed under\r
++# public domain\r
++# https://commons.wikimedia.org/wiki/File:Edit-cut.svg\r
++freecad source: license-problem-cc-by-nc-sa src/Gui/Icons/edit-cut.svg\r
++freecad source: license-problem-cc-by-nc-sa src/Mod/TechDraw/Gui/Resources/icons/MRTE/edit-cut.svg\r
--- /dev/null
--- /dev/null
++Tests: freecadtest
++Depends: freecad, xvfb, xauth
++Restrictions: allow-stderr
--- /dev/null
--- /dev/null
++#!/bin/dash
++# autopkgtest check
++# (C) 2014 Anton Gladky <gladk@debian.org>
++
++set -e
++
++export FREECAD_USER_HOME="$AUTOPKGTEST_TMP"
++
++WORKDIR=$(mktemp -d)
++trap "rm -rf $WORKDIR" 0 INT QUIT ABRT PIPE TERM
++cd $WORKDIR
++
++tests_ok="TestSpreadsheet TestSketcherApp MeshTestsApp TestAddonManagerApp TestPartDesignApp BaseTests UnitTests Document Metadata UnicodeTests TestPythonSyntax TestDraft TestPartApp TestFemApp TestTechDrawApp"
++
++# does not work on s390x -- https://forum.freecadweb.org/viewtopic.php?f=15&t=71764
++# (this variable is just for documentation, it is not used below)
++tests_flaky=TestPathApp
++
++if dpkg-architecture -e s390x
++then
++ for t in $tests_ok
++ do
++ echo "### Running Test $t ### "
++ freecadcmd -t $t
++ done
++else
++ freecadcmd -t 0
++fi
++
++echo "freecadcmd: OK"
++
++# GUI test suite (ensuring also that libraries can be loaded)
++# (As there are some tests that fail, run only one randomly choosen test…)
++# xvfb-run freecad --run-test TestSpreadsheet.SpreadsheetCases
++# echo "freecad: OK"
--- /dev/null
--- /dev/null
++---
++Bug-Database: https://github.com/FreeCAD/FreeCAD/issues
++Bug-Submit: https://github.com/FreeCAD/FreeCAD/issues/new
++Repository: https://github.com/FreeCAD/FreeCAD.git
++Repository-Browse: https://github.com/FreeCAD/FreeCAD
++Registry:
++ - Name: SciCrunch
++ Entry: SCR_022535
--- /dev/null
--- /dev/null
++version=4
++opts=repacksuffix=+dfsg1,uversionmangle=s/(\d)[_\.\-\+]?((RC|rc|pre|dev|beta|alpha|b|a)\d*)$/$1~$2/,dversionmangle=s/\+(debian|dfsg|ds|deb)\d*$// \
++https://github.com/FreeCAD/FreeCAD/tags .*/(\d.*).*(?<!_pre)\.(?:tgz|tbz2|txz|tar\.(?:gz|bz2|xz))
projects / freecad.git / commitdiff