--- /dev/null
--- /dev/null
++xpa (2.1.15-4) unstable; urgency=low
++
++ * Update maintainers e-mail address
++ * Update standards version to 3.9.6. No changes needed.
++ * Change VCS location to debian-astro
++ * Remove conf.h include from xpa.h. Closes: #764406
++ * Add symbols file
++
++ -- Ole Streicher <olebole@debian.org> Thu, 25 Sep 2014 12:21:34 +0200
++
++xpa (2.1.15-3) unstable; urgency=low
++
++ * update config.{sub,guess} for the AArch64 port. Closes: #727523
++
++ -- Ole Streicher <debian@liska.ath.cx> Sun, 27 Oct 2013 17:26:34 +0100
++
++xpa (2.1.15-2) unstable; urgency=low
++
++ * Fix FTBS on IA64
++
++ -- Ole Streicher <debian@liska.ath.cx> Thu, 25 Jul 2013 17:29:25 +0200
++
++xpa (2.1.15-1) unstable; urgency=low
++
++ * New upstream version
++ * Change priority to optional
++ * Change compat to 9: fixes lintian warnings
++ * Push standards to 3.9.4: No changes needed
++
++ -- Ole Streicher <debian@liska.ath.cx> Thu, 25 Jul 2013 10:21:05 +0200
++
++xpa (2.1.14-2) unstable; urgency=low
++
++ * Install correct pkgIndex.tcl in tcl-xpa
++
++ -- Ole Streicher <debian@liska.ath.cx> Sat, 09 Jun 2012 10:12:51 +0200
++
++xpa (2.1.14-1) unstable; urgency=low
++
++ * New upstream version.
++
++ -- Ole Streicher <debian@liska.ath.cx> Fri, 08 Jun 2012 16:05:54 +0200
++
++xpa (2.1.13-1) unstable; urgency=low
++
++ * Initial release. (Closes: #655651)
++
++ -- Ole Streicher <debian@liska.ath.cx> Thu, 26 Jan 2012 09:20:00 +0100
--- /dev/null
--- /dev/null
++config.log
++config.status.lineno
++
--- /dev/null
--- /dev/null
++9
--- /dev/null
--- /dev/null
++Source: xpa
++Section: science
++Priority: optional
++Maintainer: Ole Streicher <olebole@debian.org>
++Build-Depends: autotools-dev, debhelper (>= 9), libxt-dev, tcl-dev
++Standards-Version: 3.9.6
++Homepage: http://hea-www.harvard.edu/RD/xpa/
++Vcs-Git: git://anonscm.debian.org/debian-astro/packages/xpa.git
++Vcs-Browser: https://anonscm.debian.org/cgit/debian-astro/packages/xpa.git
++
++Package: libxpa1
++Section: libs
++Architecture: any
++Depends: ${misc:Depends}, ${shlibs:Depends}
++Description: Seamless communication between Unix programs (shared library)
++ The XPA messaging system provides seamless communication between many kinds
++ of Unix programs, including X programs and Tcl/Tk programs. It also provides
++ an easy way for users to communicate with these XPA-enabled programs by
++ executing XPA client commands in the shell or by utilizing such commands in
++ scripts. Because XPA works both at the programming level and the shell level,
++ it is a powerful tool for unifying any analysis environment: users and
++ programmers have great flexibility in choosing the best level or levels at
++ which to access XPA services, and client access can be extended or modified
++ easily at any time.
++ .
++ This package contains the shared library.
++
++Package: libxpa-dev
++Section: libdevel
++Architecture: any
++Depends: libxpa1 (= ${binary:Version}), ${misc:Depends}
++Description: Seamless communication between Unix programs (development files)
++ The XPA messaging system provides seamless communication between many kinds
++ of Unix programs, including X programs and Tcl/Tk programs. It also provides
++ an easy way for users to communicate with these XPA-enabled programs by
++ executing XPA client commands in the shell or by utilizing such commands in
++ scripts. Because XPA works both at the programming level and the shell level,
++ it is a powerful tool for unifying any analysis environment: users and
++ programmers have great flexibility in choosing the best level or levels at
++ which to access XPA services, and client access can be extended or modified
++ easily at any time.
++ .
++ This package contains the header files and the static library.
++
++Package: xpa-tools
++Architecture: any
++Depends: libxpa1 (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends}
++Description: Tools for seamless communication between Unix programs
++ The XPA messaging system provides seamless communication between many kinds
++ of Unix programs, including X programs and Tcl/Tk programs. It also provides
++ an easy way for users to communicate with these XPA-enabled programs by
++ executing XPA client commands in the shell or by utilizing such commands in
++ scripts. Because XPA works both at the programming level and the shell level,
++ it is a powerful tool for unifying any analysis environment: users and
++ programmers have great flexibility in choosing the best level or levels at
++ which to access XPA services, and client access can be extended or modified
++ easily at any time.
++ .
++ This package contains the additional tools.
++
++Package: tcl-xpa
++Architecture: any
++Section: interpreters
++Depends: libxpa1 (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends}
++Description: Seamless communication between Unix programs (Tcl interface)
++ The XPA messaging system provides seamless communication between many kinds
++ of Unix programs, including X programs and Tcl/Tk programs. It also provides
++ an easy way for users to communicate with these XPA-enabled programs by
++ executing XPA client commands in the shell or by utilizing such commands in
++ scripts. Because XPA works both at the programming level and the shell level,
++ it is a powerful tool for unifying any analysis environment: users and
++ programmers have great flexibility in choosing the best level or levels at
++ which to access XPA services, and client access can be extended or modified
++ easily at any time.
++ .
++ This package contains the Tcl interface.
--- /dev/null
--- /dev/null
++Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
++Upstream-Name: XPA
++Upstream-Author: Eric Mandel
++Source: http://hea-www.harvard.edu/RD/xpa/
++
++Files: *
++Copyright: Copyright (c) 1999-2003 Smithsonian Astrophysical Observatory
++License: LGPL
++ On Debian systems, the complete text of the GNU Lesser General
++ Public License can be found in `/usr/share/common-licenses/LGPL-2.1'.
++
++Files: install-sh
++Copyright: Copyright 1991 by the Massachusetts Institute of Technology
++License: MIT
++ Permission to use, copy, modify, distribute, and sell this software and its
++ documentation for any purpose is hereby granted without fee, provided that
++ the above copyright notice appear in all copies and that both that
++ copyright notice and this permission notice appear in supporting
++ documentation, and that the name of M.I.T. not be used in advertising or
++ publicity pertaining to distribution of the software without specific,
++ written prior permission. M.I.T. makes no representations about the
++ suitability of this software for any purpose. It is provided "as is"
++ without express or implied warranty.
++
++Files: mklib
++Copyright: Copyright (C) 1999-2006 Brian Paul
++License: MIT/X11
++ Permission is hereby granted, free of charge, to any person obtaining a
++ copy of this software and associated documentation files (the "Software"),
++ to deal in the Software without restriction, including without limitation
++ the rights to use, copy, modify, merge, publish, distribute, sublicense,
++ and/or sell copies of the Software, and to permit persons to whom the
++ Software is furnished to do so, subject to the following conditions:
++ .
++ The above copyright notice and this permission notice shall be included
++ in all copies or substantial portions of the Software.
++ .
++ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
++ OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
++ BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
++ AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
++ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++
++Files: debian/*
++Copyright: not applicable
++License: public-domain
++ Debian packaging by Ole Streicher <debian@liska.ath.cx>
--- /dev/null
--- /dev/null
++Document: xpa
++Title: XPA: Public Access to Data and Algorithms
++Section: Programming
++Abstract: The XPA messaging system provides seamless communication between
++ many kinds of Unix programs, including X programs and Tcl/Tk programs. It
++ also provides an easy way for users to communicate with XPA-enabled programs
++ by executing XPA client commands in the shell or by utilizing such commands
++ in scripts. Because XPA works both at the programming level and the shell
++ level, it is a powerful tool for unifying any analysis environment: users and
++ programmers have great flexibility in choosing the best level or levels at
++ which to access XPA services, and client access can be extended or modified
++ easily at any time.
++
++Format: PDF
++Files: /usr/share/doc/libxpa-dev/xpa.pdf.gz
++
++Format: HTML
++Index: /usr/share/doc/libxpa-dev/help.html
++Files: /usr/share/doc/libxpa-dev/*.html
--- /dev/null
--- /dev/null
++doc/*.html
++doc/xpa.pdf
--- /dev/null
--- /dev/null
++usr/include/prsetup.h
++usr/include/xpa.h
++usr/lib/libxpa.a
++usr/lib/libxpa.so
++usr/share/man/man3/xpaaccess.3
++usr/share/man/man3/xpaatexit.3
++usr/share/man/man3/xpacleanup.3
++usr/share/man/man3/xpaclient.3
++usr/share/man/man3/xpaclose.3
++usr/share/man/man3/xpacmdadd.3
++usr/share/man/man3/xpacmddel.3
++usr/share/man/man3/xpacmdnew.3
++usr/share/man/man3/xpafree.3
++usr/share/man/man3/xpaget.3
++usr/share/man/man3/xpagetfd.3
++usr/share/man/man3/xpainfo.3
++usr/share/man/man3/xpainfonew.3
++usr/share/man/man3/xpamacros.3
++usr/share/man/man3/xpamainloop.3
++usr/share/man/man3/xpanew.3
++usr/share/man/man3/xpanslookup.3
++usr/share/man/man3/xpaopen.3
++usr/share/man/man3/xpapoll.3
++usr/share/man/man3/xparace.3
++usr/share/man/man3/xpaserver.3
++usr/share/man/man3/xpaset.3
++usr/share/man/man3/xpasetfd.3
++usr/share/man/man7/xpa.7
++usr/share/man/man7/xpaacl.7
++usr/share/man/man7/xpachanges.7
++usr/share/man/man7/xpacode.7
++usr/share/man/man7/xpacommon.7
++usr/share/man/man7/xpaconvert.7
++usr/share/man/man7/xpaenv.7
++usr/share/man/man7/xpainet.7
++usr/share/man/man7/xpaintro.7
++usr/share/man/man7/xpamethod.7
++usr/share/man/man7/xpaname.7
++usr/share/man/man7/xpaoom.7
++usr/share/man/man7/xpatemplate.7
++usr/share/man/man7/xpausers.7
++usr/share/man/man7/xpaxt.7
--- /dev/null
--- /dev/null
++# We need the changelog.html uncompressed since it is linked in the
++# upstream HTML documentation. Although this is a policy violation,
++# we ignore Lintian here since the file will not grow infinite.
++# See http://lists.debian.org/debian-mentors/2012/01/msg00400.html
++changelog-file-not-compressed changelog.html
--- /dev/null
--- /dev/null
++usr/lib/libxpa.so.1
++usr/lib/libxpa.so.1.0
--- /dev/null
--- /dev/null
++libxpa.so.1 libxpa1 #MINVER#
++ Access@Base 2.1.14
++ ClipBoardFree@Base 2.1.14
++ ExpandEnv@Base 2.1.14
++ Find@Base 2.1.14
++ Launch@Base 2.1.14
++ LaunchPid@Base 2.1.14
++ ResolvePath@Base 2.1.14
++ XPAAccess@Base 2.1.14
++ XPAAclAdd@Base 2.1.14
++ XPAAclCheck@Base 2.1.14
++ XPAAclDel@Base 2.1.14
++ XPAAclEdit@Base 2.1.14
++ XPAAclFree@Base 2.1.14
++ XPAAclNew@Base 2.1.14
++ XPAActive@Base 2.1.14
++ XPAActiveFd@Base 2.1.14
++ XPAAddSelect@Base 2.1.14
++ XPAArgvParamlist@Base 2.1.14
++ XPAAtExit@Base 2.1.14
++ XPACleanup@Base 2.1.14
++ XPAClientAddSelect@Base 2.1.14
++ XPAClientProcessSelect@Base 2.1.14
++ XPAClientValid@Base 2.1.14
++ XPAClose@Base 2.1.14
++ XPACloseData@Base 2.1.14
++ XPACmdAdd@Base 2.1.14
++ XPACmdDel@Base 2.1.14
++ XPACmdInternalReceive@Base 2.1.14
++ XPACmdInternalSend@Base 2.1.14
++ XPACmdLookup@Base 2.1.14
++ XPACmdLookupReserved@Base 2.1.14
++ XPACmdNew@Base 2.1.14
++ XPAEndian@Base 2.1.14
++ XPAError@Base 2.1.14
++ XPAFree@Base 2.1.14
++ XPAFreeReserved@Base 2.1.14
++ XPAGet@Base 2.1.14
++ XPAGetBuf@Base 2.1.14
++ XPAGetFd@Base 2.1.14
++ XPAGetReserved@Base 2.1.14
++ XPAGets@Base 2.1.14
++ XPAHandler@Base 2.1.14
++ XPAIOCallsXPA@Base 2.1.14
++ XPAInfo@Base 2.1.14
++ XPAInfoNew@Base 2.1.14
++ XPAInitEnv@Base 2.1.14
++ XPAInitReserved@Base 2.1.14
++ XPALevelGet@Base 2.1.14
++ XPALevelSet@Base 2.1.14
++ XPALevelSpaces@Base 2.1.14
++ XPAListAdd@Base 2.1.14
++ XPAListDel@Base 2.1.14
++ XPAListHead@Base 2.1.14
++ XPALongTimeout@Base 2.1.14
++ XPAMainLoop@Base 2.1.14
++ XPAMessage@Base 2.1.14
++ XPAMethod@Base 2.1.14
++ XPAMode@Base 2.1.14
++ XPAMtype@Base 2.1.14
++ XPANSAdd@Base 2.1.14
++ XPANSClose@Base 2.1.14
++ XPANSDel@Base 2.1.14
++ XPANSKeepAlive@Base 2.1.14
++ XPANSLookup@Base 2.1.14
++ XPANSMethod@Base 2.1.14
++ XPANew@Base 2.1.14
++ XPAOK@Base 2.1.14
++ XPAOpen@Base 2.1.14
++ XPAParseIpPort@Base 2.1.14
++ XPAParseName@Base 2.1.14
++ XPAParseUnixSocket@Base 2.1.14
++ XPAPoll@Base 2.1.14
++ XPAPort@Base 2.1.14
++ XPAPortAdd@Base 2.1.14
++ XPAPortDel@Base 2.1.14
++ XPAPortFree@Base 2.1.14
++ XPAPortNew@Base 2.1.14
++ XPAProcessSelect@Base 2.1.14
++ XPAPutBuf@Base 2.1.14
++ XPAPuts@Base 2.1.14
++ XPAReceiveAcl@Base 2.1.14
++ XPAReceiveClipboard@Base 2.1.14
++ XPAReceiveCommands@Base 2.1.14
++ XPAReceiveLTimeout@Base 2.1.14
++ XPAReceiveRemote@Base 2.1.14
++ XPAReceiveSTimeout@Base 2.1.14
++ XPARemote@Base 2.1.14
++ XPASaveJmp@Base 2.1.14
++ XPASendAcl@Base 2.1.14
++ XPASendClipboard@Base 2.1.14
++ XPASendCommands@Base 2.1.14
++ XPASendLTimeout@Base 2.1.14
++ XPASendRemote@Base 2.1.14
++ XPASendSTimeout@Base 2.1.14
++ XPASet@Base 2.1.14
++ XPASetBuf@Base 2.1.14
++ XPASetFd@Base 2.1.14
++ XPASetFree@Base 2.1.14
++ XPAShortTimeout@Base 2.1.14
++ XPASigusr1@Base 2.1.14
++ XPASleep@Base 2.1.14
++ XPATimestamp@Base 2.1.14
++ XPATmpdir@Base 2.1.14
++ XPAValid@Base 2.1.14
++ XPAVerbosity@Base 2.1.14
++ XPAVersionCheck@Base 2.1.14
++ XPAVersionWarn@Base 2.1.14
++ _XPAValid@Base 2.1.14
++ alrmconnect@Base 2.1.14
++ cluc@Base 2.1.14
++ culc@Base 2.1.14
++ freedelim@Base 2.1.14
++ freedtable@Base 2.1.14
++ gethost@Base 2.1.14
++ gethostip@Base 2.1.14
++ getiphost@Base 2.1.14
++ isfalse@Base 2.1.14
++ istrue@Base 2.1.14
++ keyword@Base 2.1.14
++ lastdelim@Base 2.1.14
++ macro@Base 2.1.14
++ newdelim@Base 2.1.14
++ newdtable@Base 2.1.14
++ noblkconnect@Base 2.1.14
++ nocr@Base 2.1.14
++ nowhite@Base 2.1.14
++ strtoul16@Base 2.1.14
++ tmatch@Base 2.1.14
++ use_localhost@Base 2.1.14
++ word@Base 2.1.14
++ xalloc_savejmp@Base 2.1.14
++ xcalloc@Base 2.1.14
++ xfree@Base 2.1.14
++ xmalloc@Base 2.1.14
++ xpaMessbuf@Base 2.1.14
++ xpa_gtk@Base 2.1.14
++ xrealloc@Base 2.1.14
++ xstrdup@Base 2.1.14
--- /dev/null
--- /dev/null
++Author: Ole Streicher <debian@liska.ath.cx>
++Description: Fix manpages (section, name, and spellfixes) so that lintian
++ does not complain
++--- a/man/man1/xpachanges.1
+++++ b/man/man1/xpachanges.1
++@@ -123,14 +123,14 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpachanges 1"
++-.TH xpachanges 1 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpachanges 7"
+++.TH xpachanges 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++ .nh
++ .SH "NAME"
++-\&\fB\s-1XPA\s0 Changes: Changes For Users from \s-1XPA\s0 1.0 and 2.0\fR
+++XPAChanges \- Changes For Users from XPA 1.0 and 2.0
++ .SH "SYNOPSIS"
++ .IX Header "SYNOPSIS"
++ This document describes changes that will affect users who migrate
++--- a/man/man3/xpaaccess.3
+++++ b/man/man3/xpaaccess.3
++@@ -130,8 +130,7 @@
++ .if n .ad l
++ .nh
++ .SH "NAME"
++-XPAAccess: return XPA access points matching
++-template (XPA 2.1 and above)
+++XPAAccess \- return XPA access points matching template (XPA 2.1 and above)
++ .SH "SYNOPSIS"
++ .IX Header "SYNOPSIS"
++ .Vb 1
++--- a/man/man3/xpamacros.3
+++++ b/man/man3/xpamacros.3
++@@ -130,7 +130,7 @@
++ .if n .ad l
++ .nh
++ .SH "NAME"
++-\&\fB\s-1XPA\s0 Server Callback Macros\fR
+++XPAMacros \- Server Callback Macros
++ .SH "SYNOPSIS"
++ .IX Header "SYNOPSIS"
++ .Vb 1
++--- a/man/man3/xparace.3
+++++ b/man/man3/xparace.3
++@@ -130,7 +130,7 @@
++ .if n .ad l
++ .nh
++ .SH "NAME"
++-\&\fB\s-1XPA\s0 Race Conditions\fR
+++XPARace \- Race Conditions
++ .SH "SYNOPSIS"
++ .IX Header "SYNOPSIS"
++ Potential \s-1XPA\s0 race conditions and how to avoid them.
++--- a/man/mann/xpa.n
+++++ b/man/mann/xpa.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpa n"
++-.TH xpa n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpa 7"
+++.TH xpa 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++@@ -169,22 +169,22 @@
++ Choose from the following topics:
++ .IP "\(bu" 4
++ Introduction to \s-1XPA\s0
++-[xpaintro(n)]
+++[xpaintro(7)]
++ .IP "\(bu" 4
++ Access Point Names and Templates
++-[xpatemplate(n)]
+++[xpatemplate(7)]
++ .IP "\(bu" 4
++ Getting Common Information About Access Points
++-[xpacommon(n)]
+++[xpacommon(7)]
++ .IP "\(bu" 4
++ Communication Methods
++-[xpamethod(n)]
+++[xpamethod(7)]
++ .IP "\(bu" 4
++ Communication Between Hosts
++-[xpainet(n)]
+++[xpainet(7)]
++ .IP "\(bu" 4
++ Distinguishing Users
++-[xpausers(n)]
+++[xpausers(7)]
++ .IP "\(bu" 4
++ \&\s-1XPA\s0 User Programs
++ .RS 4
++@@ -283,10 +283,10 @@
++ [\fIxpaaccess\fR\|(3)]
++ .IP "\(bu" 4
++ The XPA/Xt Interface: Xt interface to \s-1XPA\s0
++-[xpaxt(n)]
+++[xpaxt(7)]
++ .IP "\(bu" 4
++ The XPA/Tcl Interface: Tcl interface to \s-1XPA\s0
++-[xpatcl(n)]
+++[xpa(3tcl)]
++ .RE
++ .RS 4
++ .RE
++@@ -295,10 +295,10 @@
++ .RS 4
++ .IP "\(bu" 4
++ Environment Variables
++-[xpaenv(n)]
+++[xpaenv(7)]
++ .IP "\(bu" 4
++ Access Control
++-[xpaacl(n)]
+++[xpaacl(7)]
++ .RE
++ .RS 4
++ .RE
++--- a/man/mann/xpaacl.n
+++++ b/man/mann/xpaacl.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpaacl n"
++-.TH xpaacl n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpaacl 7"
+++.TH xpaacl 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++--- a/man/mann/xpacode.n
+++++ b/man/mann/xpacode.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpacode n"
++-.TH xpacode n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpacode 7"
+++.TH xpacode 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++--- a/man/mann/xpacommon.n
+++++ b/man/mann/xpacommon.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpacommon n"
++-.TH xpacommon n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpacommon 7"
+++.TH xpacommon 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++--- a/man/mann/xpaconvert.n
+++++ b/man/mann/xpaconvert.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpaconvert n"
++-.TH xpaconvert n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpaconvert 7"
+++.TH xpaconvert 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++--- a/man/mann/xpaenv.n
+++++ b/man/mann/xpaenv.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpaenv n"
++-.TH xpaenv n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpaenv 7"
+++.TH xpaenv 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++@@ -471,12 +471,3 @@
++ .SH "SEE ALSO"
++ .IX Header "SEE ALSO"
++ See xpa(n) for a list of \s-1XPA\s0 help pages
++-.SH "POD ERRORS"
++-.IX Header "POD ERRORS"
++-Hey! \fBThe above document had some coding errors, which are explained below:\fR
++-.IP "Around line 458:" 4
++-.IX Item "Around line 458:"
++-\&'=item' outside of any '=over'
++-.IP "Around line 509:" 4
++-.IX Item "Around line 509:"
++-You forgot a '=back' before '=head1'
++--- a/man/mann/xpainet.n
+++++ b/man/mann/xpainet.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpainet n"
++-.TH xpainet n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpainet 7"
+++.TH xpainet 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++--- a/man/mann/xpaintro.n
+++++ b/man/mann/xpaintro.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpaintro n"
++-.TH xpaintro n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpaintro 7"
+++.TH xpaintro 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++--- a/man/mann/xpamethod.n
+++++ b/man/mann/xpamethod.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpamethod n"
++-.TH xpamethod n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpamethod 7"
+++.TH xpamethod 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++--- a/man/mann/xpaname.n
+++++ b/man/mann/xpaname.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpaname n"
++-.TH xpaname n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpaname 7"
+++.TH xpaname 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++--- a/man/mann/xpaoom.n
+++++ b/man/mann/xpaoom.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpaoom n"
++-.TH xpaoom n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpaoom 7"
+++.TH xpaoom 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++--- a/man/mann/xpatcl.n
+++++ b/man/mann/xpatcl.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpatcl n"
++-.TH xpatcl n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpa 3tcl"
+++.TH xpa 3tcl "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++--- a/man/mann/xpatemplate.n
+++++ b/man/mann/xpatemplate.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpatemplate n"
++-.TH xpatemplate n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpatemplate 7"
+++.TH xpatemplate 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++--- a/man/mann/xpausers.n
+++++ b/man/mann/xpausers.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpausers n"
++-.TH xpausers n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpausers 7"
+++.TH xpausers 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
++--- a/man/mann/xpaxt.n
+++++ b/man/mann/xpaxt.n
++@@ -123,8 +123,8 @@
++ .rm #[ #] #H #V #F C
++ .\" ========================================================================
++ .\"
++-.IX Title "xpaxt n"
++-.TH xpaxt n "July 23, 2013" "version 2.1.15" "SAORD Documentation"
+++.IX Title "xpaxt 7"
+++.TH xpaxt 7 "July 23, 2013" "version 2.1.15" "SAORD Documentation"
++ .\" For nroff, turn off justification. Always turn off hyphenation; it makes
++ .\" way too many mistakes in technical documents.
++ .if n .ad l
--- /dev/null
--- /dev/null
++Author: Ole Streicher <debian@liska.ath.cx>
++Description: Fix the paths for a chroot build and for FHS
++--- a/Makefile.in
+++++ b/Makefile.in
++@@ -34,7 +34,7 @@
++ # to be different than those used for actually reference files at
++ # run-time. INSTALL_ROOT is prepended to $prefix and $exec_prefix
++ # when installing files.
++-INSTALL_ROOT =
+++INSTALL_ROOT = $(DESTDIR)
++
++ # Directory in which to install the .a or .so binary for the XPA library:
++ LIB_INSTALL_DIR = $(INSTALL_ROOT)$(exec_prefix)/lib
++@@ -46,7 +46,7 @@
++ INCLUDE_INSTALL_DIR = $(INSTALL_ROOT)$(prefix)/include
++
++ # Top-level directory for manual entries:
++-MAN_INSTALL_DIR = $(INSTALL_ROOT)$(prefix)/man
+++MAN_INSTALL_DIR = $(INSTALL_ROOT)$(prefix)/share/man
++
++ # Top-level directory for share entries:
++ MAN_SHARE_DIR = $(INSTALL_ROOT)$(prefix)/share/xpa
++@@ -273,7 +273,7 @@
++ do \
++ if [ ! -d $$i ] ; then \
++ echo "Making directory $$i"; \
++- mkdir $$i; \
+++ mkdir -p $$i; \
++ chmod 755 $$i; \
++ else true; \
++ fi; \
++@@ -295,14 +295,22 @@
++ install-man:
++ @if [ ! -d $(MAN_INSTALL_DIR) ] ; then \
++ echo "Making directory $(MAN_INSTALL_DIR)"; \
++- mkdir $(MAN_INSTALL_DIR); \
+++ mkdir -p $(MAN_INSTALL_DIR); \
++ chmod 755 $(MAN_INSTALL_DIR); \
++ else true; \
++ fi;
++ @-(for i in `ls ./man/man?/*.?` ; \
++ do \
++- B=`basename $$i`; \
++- E=`echo $$i | awk -F. '{print $$NF}'`; \
+++ B=`basename $$i | sed s/\\\\.n/.7/`; \
+++ E=`echo $$i | awk -F. '{print $$NF}' | sed s/n/7/`; \
+++ case $$B in \
+++ xpatcl.7) \
+++ B=xpa.3tcl; \
+++ E=3;; \
+++ xpachanges.1) \
+++ B=xpachanges.7; \
+++ E=7;; \
+++ esac; \
++ M="$(MAN_INSTALL_DIR)/man$$E"; \
++ if [ ! -d $$M ] ; then \
++ echo "Making directory $$M"; \
++@@ -312,6 +320,9 @@
++ fi; \
++ echo "Installing $$B" ; \
++ $(INSTALL_DATA) $$i $$M/$$B; \
+++ sed -i "s/\([-\[ \"]\)\(-[A-Za-z0-9]\)/\1\\\\\2/g" $$M/$$B ; \
+++ sed -i "s/^\\\&\\\fB\(.*\):\(.*\)\\\fR/\1 \- \2/g" $$M/$$B ; \
+++ sed -i "s/xpa(n)/xpa(7)/g" $$M/$$B ; \
++ done;)
++
++ install-share:
--- /dev/null
--- /dev/null
++Author: Ole Streicher <olebole@debian.org>
++Description: Remove conf.h include from xpa.h.
++ The missing file is included by a preprocessor switch.
++Bug: https://bugs.debian.org/764406
++--- a/Makefile.in
+++++ b/Makefile.in
++@@ -122,9 +122,9 @@
++
++ CC = @CC@
++
++-CC_SWITCHES = -I. ${CFLAGS} ${CPPFLAGS} ${AC_FLAGS}
+++CC_SWITCHES = -I. ${CFLAGS} ${CPPFLAGS} ${AC_FLAGS} -include conf.h
++
++-DEPEND_SWITCHES = -I. ${CFLAGS} ${PKG_CFLAGS} ${AC_FLAGS}
+++DEPEND_SWITCHES = -I. ${CFLAGS} ${PKG_CFLAGS} ${AC_FLAGS} -include conf.h
++
++ SRCS = xpa.c xpaio.c command.c acl.c remote.c clipboard.c port.c \
++ tcp.c client.c word.c xalloc.c find.c xlaunch.c timedconn.c \
++--- a/xpa.h
+++++ b/xpa.h
++@@ -11,10 +11,6 @@
++ #ifndef __xpa_h
++ #define __xpa_h
++
++-#if HAVE_CONFIG_H
++-#include <conf.h>
++-#endif
++-
++ #include <stdio.h>
++ #include <sys/types.h>
++ #include <prsetup.h>
--- /dev/null
--- /dev/null
++Author: Ole Streicher <debian@liska.ath.cx>
++Description: Add hardening flags
++--- a/Makefile.in
+++++ b/Makefile.in
++@@ -122,7 +122,7 @@
++
++ CC = @CC@
++
++-CC_SWITCHES = -I. ${CFLAGS} ${AC_FLAGS}
+++CC_SWITCHES = -I. ${CFLAGS} ${CPPFLAGS} ${AC_FLAGS}
++
++ DEPEND_SWITCHES = -I. ${CFLAGS} ${PKG_CFLAGS} ${AC_FLAGS}
++
++@@ -183,7 +183,7 @@
++ rm -f lib$(PACKAGE).tmp/xt*.o; \
++ rm -f lib$(PACKAGE).tmp/tcl*.o; \
++ CC='$(CC)' CXX=$(CXX) \
++- ./mklib -o $(PACKAGE) lib$(PACKAGE).tmp/*.o; \
+++ ./mklib -ldflags "$(LDFLAGS)" -o $(PACKAGE) lib$(PACKAGE).tmp/*.o; \
++ rm -rf lib$(PACKAGE).tmp)
++
++ mingw-dll: $(LIBOBJS)
++@@ -202,7 +202,7 @@
++ @(rm -rf $(PACKAGE)tmp; mkdir $(PACKAGE)tmp; \
++ (cd $(PACKAGE)tmp && ar x ../libtclxpa.a); \
++ CC='$(CC)' CXX='$(CXX)' \
++- ./mklib -o tclxpa -L. -lxpa $(PACKAGE)tmp/*.o $(TCL_LIBS); \
+++ ./mklib -ldflags "$(LDFLAGS)" -o tclxpa -L. -lxpa $(PACKAGE)tmp/*.o $(TCL_LIBS); \
++ rm -rf $(PACKAGE)tmp; )
++
++ diff:
--- /dev/null
--- /dev/null
++Author: Ole Streicher <debian@liska.ath.cx>
++Description: Install the tcl interface to /usr/lib/tcltk/xpa according to
++ Debians policy.
++--- a/Makefile.in
+++++ b/Makefile.in
++@@ -38,6 +38,7 @@
++
++ # Directory in which to install the .a or .so binary for the XPA library:
++ LIB_INSTALL_DIR = $(INSTALL_ROOT)$(exec_prefix)/lib
+++TCL_LIB_INSTALL_DIR = $(LIB_INSTALL_DIR)/tcltk/xpa
++
++ # Directory in which to install the program wish:
++ BIN_INSTALL_DIR = $(INSTALL_ROOT)$(exec_prefix)/bin
++@@ -142,7 +143,7 @@
++ INCL = xpa.h xpap.h
++
++ # these are all the modules going into the "normal" xpa library
++-LIBOBJS = ${BASE_OBJS} ${TCL_OBJS} ${XT_OBJS} ${GTK_OBJS}
+++LIBOBJS = ${BASE_OBJS} ${XT_OBJS} ${GTK_OBJS}
++ LIB = libxpa.a
++
++ # used in link line
++@@ -167,6 +168,8 @@
++
++ install:: install-share
++
+++install:: tclxpa_install
+++
++ lib: $(LIB) $(DOSHARED)
++
++ $(LIB): $(LIBOBJS)
++@@ -190,14 +193,17 @@
++ -Wl,--output-def,libxpa.def,--out-implib,libxpa_dll.a,-no-undefined,--enable-runtime-pseudo-reloc -o libxpa.dll \
++ -lwsock32
++
++-tclxpa: $(LIB)
++- @(rm -rf libtclxpa.tmp; mkdir libtclxpa.tmp; \
++- (cd libtclxpa.tmp && ar x ../lib$(PACKAGE).a); \
++- rm -f libtclxpa.tmp/xt*.o; \
++- CC='$(CC)' CXX=$(CXX) \
++- ./mklib -o tclxpa libtclxpa.tmp/*.o $(TCL_LIBS); \
++- test -r libtclxpa.dylib && cp -p libtclxpa.dylib libtclxpa.so && echo "copying libtclxpa.dylib to libtclxpa.so"; \
++- rm -rf libtclxpa.tmp)
+++
+++tclxpa: $(TCL_OBJS)
+++ ar cruv libtclxpa.a $(TCL_OBJS)
+++ $(RANLIB) libtclxpa.a
+++
+++shtclxpa: tclxpa
+++ @(rm -rf $(PACKAGE)tmp; mkdir $(PACKAGE)tmp; \
+++ (cd $(PACKAGE)tmp && ar x ../libtclxpa.a); \
+++ CC='$(CC)' CXX='$(CXX)' \
+++ ./mklib -o tclxpa -L. -lxpa $(PACKAGE)tmp/*.o $(TCL_LIBS); \
+++ rm -rf $(PACKAGE)tmp; )
++
++ diff:
++ -(for f in `ls *.c`; \
++@@ -256,7 +262,7 @@
++ _install:
++
++ shlib_install:
++- @-(for i in `ls *.so* *.dylib *.sl 2>/dev/null` ; \
+++ @-(for i in `ls libxpa.so* *.dylib *.sl 2>/dev/null` ; \
++ do \
++ if [ -h $$i ] ; then \
++ echo "Installing link $$i" ; \
++@@ -268,6 +274,11 @@
++ fi; \
++ done;)
++
+++tclxpa_install: shtclxpa
+++ mkdir -p $(TCL_LIB_INSTALL_DIR)
+++ $(INSTALL_DATA) libtclxpa.so $(TCL_LIB_INSTALL_DIR)
+++ $(INSTALL_DATA) pkgIndex.tcl $(TCL_LIB_INSTALL_DIR)
+++
++ install-binaries: $(LIB) $(PROGS)
++ @for i in $(LIB_INSTALL_DIR) $(INCLUDE_INSTALL_DIR) $(BIN_INSTALL_DIR) ; \
++ do \
++--- a/tcl.c
+++++ b/tcl.c
++@@ -971,7 +971,7 @@
++ /* create new tcl variable for this socket */
++ else{
++ /* create a tcl channel corresponding to the xpa socket */
++- if( !(chan = Tcl_MakeTcpClientChannel((ClientData)xpa_cmdfd(xpa))) ){
+++ if( !(chan = Tcl_MakeTcpClientChannel((ClientData)(intptr_t)xpa_cmdfd(xpa))) ){
++ Tcl_SetResult(interp, "XPA$ERROR: could not map XPA cmdfd to tcl",
++ TCL_STATIC);
++ result = TCL_ERROR;
++@@ -1013,7 +1013,7 @@
++ }
++ /* create new tcl variable for this socket */
++ else{
++- if( !(chan = Tcl_MakeTcpClientChannel((ClientData)xpa_datafd(xpa))) ){
+++ if( !(chan = Tcl_MakeTcpClientChannel((ClientData)(intptr_t)xpa_datafd(xpa))) ){
++ Tcl_SetResult(interp, "XPA$ERROR: could not map XPA datafd to tcl",
++ TCL_STATIC);
++ result = TCL_ERROR;
--- /dev/null
--- /dev/null
++fix_paths.patch
++fix_manpages.patch
++install_tclxpa.patch
++hardening.patch
++fix_xpa_h.patch
--- /dev/null
--- /dev/null
++#!/usr/bin/make -f
++# -*- makefile -*-
++# Uncomment this to turn on verbose mode.
++#export DH_VERBOSE=1
++
++%:
++ dh $@ --with autotools_dev
++
++override_dh_auto_configure:
++ dh_auto_configure -- --enable-shared --with-threads --with-tclconfig=/usr/lib --with-tcl=/usr/include/tcl
++
++override_dh_auto_build:
++ dh_auto_build -- all tclxpa
++
++override_dh_installchangelogs:
++ dh_installchangelogs doc/changelog.html
++ for pkg in tcl-xpa libxpa1 xpa-tools ; do \
++ rm -f debian/$$pkg/usr/share/doc/$$pkg/changelog.html; \
++ done
++
++override_dh_compress:
++ dh_compress -Xchangelog.html
++
++override_dh_makeshlibs:
++ dh_makeshlibs -Xlibtclxpa.so
--- /dev/null
--- /dev/null
++3.0 (quilt)
--- /dev/null
--- /dev/null
++usr/lib/tcltk/xpa/libtclxpa.so
++usr/lib/tcltk/xpa/pkgIndex.tcl
++usr/share/man/man3/xpa.3tcl
--- /dev/null
--- /dev/null
++version=3
++http://hea-www.harvard.edu/RD/xpa/ http://hea-www.harvard.edu/saord/download/xpa/xpa-(.+)\.tar\.gz
--- /dev/null
--- /dev/null
++usr/bin/xpaaccess
++usr/bin/xpaget
++usr/bin/xpainfo
++usr/bin/xpamb
++usr/bin/xpans
++usr/bin/xpaset
++usr/share/man/man1/xpaaccess.1
++usr/share/man/man1/xpaget.1
++usr/share/man/man1/xpainfo.1
++usr/share/man/man1/xpamb.1
++usr/share/man/man1/xpans.1
++usr/share/man/man1/xpaset.1
projects / xpa.git / commitdiff