--- /dev/null
+bumblebee for Debian/Ubuntu
+---------------------------
+
+Post-installation instructions:
+-------------------------------
+
+You must add your user to the bumblebee group in order to use optirun or
+primusrun, i.e.
+
+ $ sudo adduser $USER bumblebee
+
+where $USER corresponds to your username. Don't forget to log out and log back
+in for this to take effect.
+
+If you have sudo configured for your current user, i.e. your user is a member
+of the sudo group, this step is not needed (the bumblebee package postinst
+script takes care of adding sudo users to the bumblebee group automatically).
+To clarify, sudo is not needed to use bumblebee; it simply makes adding your
+user to the bumblebee group unnecessary.
+
+This step is unnecessary for Ubuntu users since sudo comes pre-configured and
+ready to be used by default (for user accounts created during install).
+
+To test whether bumblebee has been configured correctly, try running the
+glxgears demo (you must first install mesa-utils):
+
+ $ optirun glxgears -info
+
+
+Primus vs. VirtualGL:
+---------------------
+
+Bumblebee in Debian and Ubuntu defaults to using the primus backend, because
+virtualgl has not yet been packaged for Debian/Ubuntu proper. For Ubuntu users,
+it is however easy to switch to using virtualgl by using upstream's PPAs.
+Follow the instructions at:
+https://launchpad.net/~bumblebee/+archive/stable
+
+
+Common issues:
+--------------
+
+- If optirun returns the following error:
+[ERROR]Cannot access secondary GPU - error: Could not load GPU driver
+
+You must edit /etc/bumblebee/bumblebee.conf using your preferred editor as
+root, and change "KernelDriver=nvidia" to "KernelDriver=nvidia-current",
+then restart the bumblebee daemon, i.e.
+
+ $ sudo service bumblebeed restart
+
+(Refer to https://bugs.debian.org/717687 for a brief explanation.)
+
+- If optirun returns the following error:
+[ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected
+
+You may have to set the BusID manually, in /etc/bumblebee/xorg.conf.nvidia.
+To get the BusID, run lspci | egrep 'VGA|3D' in a terminal. Refer to the
+comments in that file for further instructions.
+
+- If optirun returns the following error:
+[ERROR]Cannot access secondary GPU - error: [XORG] (EE) /dev/dri/card0:
+failed to set DRM interface version 1.4: Permission denied
+
+You have to append the following section to /etc/bumblebee/xorg.conf.nvidia:
+
+Section "Screen"
+ Identifier "Default Screen"
+ Device "DiscreteNvidia"
+EndSection
+
+Also refer to https://bugs.debian.org/756522 for a brief explanation.
+
+- If optirun errors out and dmesg reports that the GPU has "fallen off the bus"
+or "nvidia_frontend_open: minor 0, module->open() failed, error -5" on Linux
+>= 3.10 and < 3.19, either stick with an older kernel version (<= 3.9) or
+upgrade to > 3.19, or add rcutree.rcu_idle_gp_delay=1 to your grub command line
+(in /etc/default/grub, then run update-grub and reboot) as a workaround.
+
+This is a known problem upstream and suspected to be an issue with the
+proprietary nvidia driver. Refer to Bumblebee github issue #455 and #615,
+https://github.com/Bumblebee-Project/Bumblebee/issues/455 and
+https://github.com/Bumblebee-Project/Bumblebee/issues/615.
+
+A more up-to-date list of common issues can be found on the Debian/Ubuntu wiki
+pages relating to bumblebee, i.e.:
+
+https://wiki.debian.org/Bumblebee
+https://wiki.ubuntu.com/Bumblebee
+
+A more comprehensive list is available upstream:
+
+https://github.com/Bumblebee-Project/Bumblebee/wiki/Troubleshooting
+
+
+ -- Vincent Cheng <vcheng@debian.org> Sat, 25 Oct 2014 10:13:42 -0700
--- /dev/null
+bumblebee-nvidia: postinst-has-useless-call-to-ldconfig
+bumblebee-nvidia: postrm-has-useless-call-to-ldconfig
--- /dev/null
+#!/bin/sh
+set -e
+
+case "$1" in
+ configure)
+ # Repair GL on the intel display
+ update-alternatives --force --set \
+ glx /usr/lib/nvidia/bumblebee || true
+ dpkg-trigger register-glx-alternative-nvidia
+
+ # this has a chance of crashing the machine with mainline kernels...
+ grep -q '^nouveau ' /proc/modules && rmmod nouveau || true
+ if [ -e "/etc/init/bumblebeed.conf" ]; then
+ invoke-rc.d bumblebeed restart || true
+ fi
+ ;;
+esac
+
+#DEBHELPER#
--- /dev/null
+#!/bin/sh
+set -e
+
+xconffile=/etc/bumblebee/xorg.conf.nvidia
+
+case "$1" in
+ configure)
+ # Repair GL on the intel display
+ for arch in x86_64-linux-gnu i386-linux-gnu; do
+ update-alternatives --force --set \
+ ${arch}_gl_conf /usr/lib/$arch/mesa/ld.so.conf 2>/dev/null || true
+ done
+
+ # assume first device to be discrete in nvidia/nvidia
+ busid=$(lspci -d10de: -nn | grep '\[030[02]\]' | cut -d' ' -f1 | tr . : | head -1)
+
+ if [ -z "$busid" ]; then
+ echo "No Nvidia card found. If you really have an Optimus system,"
+ echo "try selecting the Optimus setup in BIOS and run:"
+ echo "sudo dpkg-reconfigure bumblebee-nvidia"
+ else
+ echo "Selecting $busid as discrete nvidia card. If this is incorrect,"
+ echo "edit the BusID line in $xconffile"
+ sed -i $xconffile -r -e "s/^([\t ]*)#([\t ]*BusID[\t ]*)\"[^\"]*\"$/\\1 \\2\"PCI\:$busid\"/"
+ fi
+
+ ldconfig
+ # this has a chance of crashing the machine with mainline kernels...
+ grep -q '^nouveau ' /proc/modules && rmmod nouveau || true
+ if [ -e "/etc/init/bumblebeed.conf" ]; then
+ invoke-rc.d bumblebeed restart || true
+ fi
+ ;;
+esac
+
+#DEBHELPER#
--- /dev/null
+#!/bin/sh
+set -e
+
+case "$1" in
+ remove|abort-install)
+ # Restore the alternatives in case bumblebee is installed on a
+ # non-Optimus system that requires the nvidia driver
+ update-alternatives --force --auto glx 2>/dev/null || true
+ dpkg-trigger register-glx-alternative-nvidia
+ ;;
+esac
+
+#DEBHELPER#
--- /dev/null
+#!/bin/sh
+set -e
+
+case "$1" in
+ remove|abort-install)
+ # Restore the alternatives in case bumblebee is installed on a
+ # non-Optimus system that requires the nvidia driver
+ for arch in x86_64-linux-gnu i386-linux-gnu; do
+ update-alternatives --force --auto ${arch}_gl_conf 2>/dev/null || true
+ done
+
+ ldconfig
+ ;;
+esac
+
+#DEBHELPER#
--- /dev/null
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides: bumblebeed
+# Required-Start: $local_fs $remote_fs $syslog
+# Required-Stop: $local_fs $remote_fs $syslog
+# Should-Start: kdm gdm lightdm nvidia-kernel
+# Should-Stop: kdm gdm lightdm nvidia-kernel
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: Bumblebee supporting NVIDIA Optimus cards
+# Description: Daemon responsible for handling power management for
+# NVIDIA Optimus cards and handling optirun requests which
+# allows the discrete card to be used
+### END INIT INFO
+
+# Author: Aron Xu <aron@debian.org>
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+DESC=bumblebeed # Introduce a short description here
+NAME=bumblebeed # Introduce the short server's name here
+DAEMON=/usr/sbin/bumblebeed # Introduce the server's location here
+DAEMON_ARGS="--daemon" # Arguments to run the daemon with
+PIDFILE=/var/run/$NAME.pid
+SCRIPTNAME=/etc/init.d/$NAME
+
+# Exit if the package is not installed
+[ -x $DAEMON ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+ # Return
+ # 0 if daemon has been started
+ # 1 if daemon was already running
+ # 2 if daemon could not be started
+ start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+ || return 1
+ start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
+ $DAEMON_ARGS \
+ || return 2
+ # Add code here, if necessary, that waits for the process to be ready
+ # to handle requests from services started subsequently which depend
+ # on this one. As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+ # Return
+ # 0 if daemon has been stopped
+ # 1 if daemon was already stopped
+ # 2 if daemon could not be stopped
+ # other if a failure occurred
+ start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+ RETVAL="$?"
+ [ "$RETVAL" = 2 ] && return 2
+ # Wait for children to finish too if this is a daemon that forks
+ # and if the daemon is only ever run from this initscript.
+ # If the above conditions are not satisfied then add some other code
+ # that waits for the process to drop all resources that could be
+ # needed by services started subsequently. A last resort is to
+ # sleep for some time.
+ start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+ [ "$?" = 2 ] && return 2
+ # Many daemons don't delete their pidfiles when they exit.
+ rm -f $PIDFILE
+ return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+ #
+ # If the daemon can reload its configuration without
+ # restarting (for example, when it is sent a SIGHUP),
+ # then implement that here.
+ #
+ start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
+ return 0
+}
+
+case "$1" in
+ start)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
+ do_start
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ stop)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ status)
+ status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+ ;;
+ #reload|force-reload)
+ #
+ # If do_reload() is not implemented then leave this commented out
+ # and leave 'force-reload' as an alias for 'restart'.
+ #
+ #log_daemon_msg "Reloading $DESC" "$NAME"
+ #do_reload
+ #log_end_msg $?
+ #;;
+ restart|force-reload)
+ #
+ # If the "reload" option is implemented then remove the
+ # 'force-reload' alias
+ #
+ log_daemon_msg "Restarting $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1)
+ do_start
+ case "$?" in
+ 0) log_end_msg 0 ;;
+ 1) log_end_msg 1 ;; # Old process is still running
+ *) log_end_msg 1 ;; # Failed to start
+ esac
+ ;;
+ *)
+ # Failed to stop
+ log_end_msg 1
+ ;;
+ esac
+ ;;
+ *)
+ #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+ echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+ exit 3
+ ;;
+esac
+
+:
--- /dev/null
+# This file is installed by bumblebee, do NOT edit!
+# to be used by kmod / module-init-tools, and installed in /etc/modprobe.d/
+# or equivalent
+
+# do not automatically load nouveau as it may prevent nvidia from loading
+blacklist nouveau
+# do not automatically load nvidia as it's unloaded anyway when bumblebeed
+# starts and may fail bumblebeed to disable the card in a race condition.
+# Debian
+blacklist nvidia
+blacklist nvidia-current
+blacklist nvidia-legacy-304xx
+blacklist nvidia-legacy-340xx
+# Ubuntu
+blacklist nvidia
+blacklist nvidia-current
+blacklist nvidia-current-updates
+# 304
+blacklist nvidia-304
+blacklist nvidia-304-updates
+blacklist nvidia-experimental-304
+# 310
+blacklist nvidia-310
+blacklist nvidia-310-updates
+blacklist nvidia-experimental-310
+# 313
+blacklist nvidia-313
+blacklist nvidia-313-updates
+blacklist nvidia-experimental-313
+# 319
+blacklist nvidia-319
+blacklist nvidia-319-updates
+blacklist nvidia-experimental-319
+# 325
+blacklist nvidia-325
+blacklist nvidia-325-updates
+blacklist nvidia-experimental-325
+# 331
+blacklist nvidia-331
+blacklist nvidia-331-updates
+blacklist nvidia-experimental-331
+# 334
+blacklist nvidia-334
+blacklist nvidia-334-updates
+blacklist nvidia-experimental-334
+# 337
+blacklist nvidia-337
+blacklist nvidia-337-updates
+blacklist nvidia-experimental-337
+# 340
+blacklist nvidia-340
+blacklist nvidia-340-updates
+blacklist nvidia-experimental-340
+# 343
+blacklist nvidia-343
+blacklist nvidia-343-updates
+blacklist nvidia-experimental-343
+# 346
+blacklist nvidia-346
+blacklist nvidia-346-updates
+blacklist nvidia-experimental-346
+# 349
+blacklist nvidia-349
+blacklist nvidia-349-updates
+blacklist nvidia-experimental-349
+# 352
+blacklist nvidia-352
+blacklist nvidia-352-updates
+blacklist nvidia-experimental-352
+# 355
+blacklist nvidia-355
+blacklist nvidia-355-updates
+blacklist nvidia-experimental-355
+# 358
+blacklist nvidia-358
+blacklist nvidia-358-updates
+blacklist nvidia-experimental-358
+# 361
+blacklist nvidia-361
+blacklist nvidia-361-updates
+blacklist nvidia-experimental-361
+# 364
+blacklist nvidia-364
+blacklist nvidia-364-updates
+blacklist nvidia-experimental-364
+# 367
+blacklist nvidia-367
+blacklist nvidia-367-updates
+blacklist nvidia-experimental-367
+# 375
+blacklist nvidia-375
+blacklist nvidia-375-updates
+blacklist nvidia-experimental-375
+# 378
+blacklist nvidia-378
+blacklist nvidia-378-updates
+blacklist nvidia-experimental-378
+# 381
+blacklist nvidia-381
+blacklist nvidia-381-updates
+blacklist nvidia-experimental-381
+# 384
+blacklist nvidia-384
+blacklist nvidia-384-updates
+blacklist nvidia-experimental-384
--- /dev/null
+debian/bumblebee.conf usr/share/bumblebee/modprobe.d/
+debian/bumblebee/etc/bumblebee/* usr/share/bumblebee/default-conf/
+scripts/systemd/bumblebeed.service lib/systemd/system/
--- /dev/null
+rm_conffile /etc/modprobe.d/bumblebee.conf 3.2.1-6~
+rm_conffile /etc/bash_completion.d/bumblebee 3.2.1-8~
+rm_conffile /etc/init/bumblebeed.conf 3.2.1-18~
--- /dev/null
+#!/bin/sh
+# postinst script for bumblebee
+#
+# see: dh_installdeb(1)
+
+set -e
+
+xconffile=/etc/bumblebee/xorg.conf.nouveau
+
+# group that allows users to use Bumblebee
+BB_GROUP=bumblebee
+
+# add members of these groups automatically to group "bumblebee" for new
+# installations
+USE_GROUPS='adm sudo admin'
+
+case "$1" in
+ configure)
+ # only add a group and members if the configured group does match the
+ # default group and if the group is missing
+ if grep -qx ServerGroup=$BB_GROUP /etc/bumblebee/bumblebee.conf &&
+ ! getent group $BB_GROUP > /dev/null; then
+ groupadd --system $BB_GROUP
+ users=$(getent group $USE_GROUPS | cut -d: -f4 | tr , '\n' | sort -u)
+ echo "Adding members from group(s) '$USE_GROUPS' to '$BB_GROUP':"
+ echo $users
+ for user in $users; do
+ gpasswd -a $user $BB_GROUP
+ done
+ fi
+
+
+ # Raring specific issue
+ # Also, do not rely solely on dpkg-vendor (see LP: #1061769)
+ if (which dpkg-vendor >/dev/null && dpkg-vendor --derives-from Ubuntu) || \
+ [ -e /etc/dpkg/origins/ubuntu ]; then
+ # assume first device to be discrete in nvidia/nvidia
+ busid=$(lspci -d10de: -nn | grep '\[030[02]\]' | cut -d' ' -f1 | tr . : | head -1)
+ if [ -z "$busid" ]; then
+ echo "No Nvidia card found. If you really have an Optimus system,"
+ echo "try selecting the Optimus setup in BIOS and run:"
+ echo "sudo dpkg-reconfigure bumblebee"
+ else
+ echo "Selecting $busid as discrete nvidia card. If this is incorrect,"
+ echo "edit the BusID line in $xconffile ."
+ sed -i $xconffile -r -e "s/^([\t ]*)#([\t ]*BusID[\t ]*)\"[^\"]*\"$/\\1 \\2\"PCI\:$busid\"/"
+ fi
+
+ # Only for 3.2.1, remove busid.conf if still present.
+ if [ -e /etc/bumblebee/xorg.conf.d/busid.conf ]; then
+ echo "Deleting old /etc/bumblebee/xorg.conf.d/busid.conf"
+ rm /etc/bumblebee/xorg.conf.d/busid.conf
+ fi
+ fi
+
+ # Do not treat /etc/modprobe.d/bumblebee-nvidia.conf as a conffile
+ # LP: #1242785, https://github.com/Bumblebee-Project/Bumblebee/issues/525
+ cp -f /usr/share/bumblebee/modprobe.d/bumblebee.conf /etc/modprobe.d/bumblebee.conf
+
+ ;;
+ triggered)
+ case "$2" in
+ restart-bumblebeed)
+ # Trigger a restart of the bumblebee service, only if it's already running
+
+ if [ -d /run/systemd/system ]; then
+ if deb-systemd-invoke is-active bumblebeed.service > /dev/null 2>&1; then
+ deb-systemd-invoke restart bumblebeed.service || exit $?
+ fi
+ elif [ -x "/etc/init.d/bumblebeed" ]; then
+ if invoke-rc.d bumblebeed status > /dev/null 2>&1; then
+ invoke-rc.d bumblebeed restart || exit $?
+ fi
+ fi
+ ;;
+ esac
+esac
+
+#DEBHELPER#
--- /dev/null
+#!/bin/sh
+# postrm script for bumblebee
+#
+# see: dh_installdeb(1)
+
+set -e
+
+case "$1" in
+ purge)
+ groupdel bumblebee || true
+ # keep this as old versions did not mark these files as conffiles
+ for file in bumblebee.conf xorg.conf.nvidia xorg.conf.nouveau; do
+ rm -f /etc/bumblebee/$file
+ done
+
+ ;;
+ remove)
+ # Do not treat /etc/modprobe.d/bumblebee-nvidia.conf as a conffile
+ # LP: #1242785, https://github.com/Bumblebee-Project/Bumblebee/issues/525
+ rm -f /etc/modprobe.d/bumblebee.conf
+
+ ;;
+esac
+
+#DEBHELPER#
--- /dev/null
+activate-noawait update-initramfs
+interest-noawait restart-bumblebeed
--- /dev/null
+bumblebee (3.2.1-20) unstable; urgency=medium
+
+ [ Andreas Beckmann ]
+ * Drop versioned constraints that are satisfied in wheezy.
+ * Switch to debhelper-compat (= 12).
+
+ [ Luca Boccassi ]
+ * Enable all hardening build flags.
+ * bumblebee-nvidia: add Ubuntu's dependencies for 390 and 410 series.
+
+ -- Luca Boccassi <bluca@debian.org> Wed, 06 Feb 2019 11:57:48 +0000
+
+bumblebee (3.2.1-19) unstable; urgency=medium
+
+ * Use wildcard to install bash completion file.
+ * Backport patch to support AMD APU setups.
+ * Backport patch to support nvidia drivers without bbswitch.
+ * Bump Standards-Version to 4.3.0, no changes.
+ * Set debhelper compat to 11.
+
+ -- Luca Boccassi <bluca@debian.org> Mon, 31 Dec 2018 18:12:20 +0000
+
+bumblebee (3.2.1-18) unstable; urgency=medium
+
+ [ Andreas Beckmann ]
+ * Add support for the 390xx legacy driver package available in Debian.
+ (Closes: #916448)
+ * The dbgsym migration was done in stretch.
+ * Switch Vcs-* URLs to salsa.debian.org.
+ * Set Rules-Requires-Root: no.
+
+ [ Luca Boccassi ]
+ * Bump Standards-Version to 4.2.1.
+ * Remove obsolete conffile /etc/init/bumblebeed.conf. Thanks Ansgar!
+ (Closes: #914979)
+
+ -- Luca Boccassi <bluca@debian.org> Fri, 14 Dec 2018 16:02:16 +0000
+
+bumblebee (3.2.1-17) unstable; urgency=medium
+
+ * Switch the triggers to -noawait to fix Lintian warning and to make
+ things easier for apt/dpkg. Both restarting bumblebeed and re-building
+ the initramfs can be deferred.
+ * B-D on debhelper (>= 9.20160709) instead of dh-systemd to fix L:E.
+ * Switch Uploaders field to bluca@debian.org email address.
+ * Switch from priority extra to optional to fix L:W and comply with
+ Policy 4.0.1.
+ * Do not ship Upstart file anymore, fixes L:W.
+ * Add 387 series to dependencies for Ubuntu.
+ * Bump Standards-Version to 4.1.2.
+
+ -- Luca Boccassi <bluca@debian.org> Fri, 08 Dec 2017 23:07:05 +0000
+
+bumblebee (3.2.1-16) unstable; urgency=medium
+
+ * Ubuntu: fix typo in modprobe, really support 378
+
+ -- Luca Boccassi <luca.boccassi@gmail.com> Sun, 02 Jul 2017 10:36:52 +0100
+
+bumblebee (3.2.1-15) unstable; urgency=medium
+
+ * Use https in debian/copyright
+ * Bump Standards-Version to 4.0.0
+ * Ubuntu: add support for 375, 378, 381 and 384
+
+ -- Luca Boccassi <luca.boccassi@gmail.com> Sat, 01 Jul 2017 19:43:52 +0100
+
+bumblebee (3.2.1-14) unstable; urgency=medium
+
+ * Add dependency to lsb-base (>= 3.0-6) to fix Lintian Error
+ * Add blacklist and dependency for nvidia-367*
+
+ -- Luca Boccassi <luca.boccassi@gmail.com> Tue, 24 Jan 2017 14:20:27 +0000
+
+bumblebee (3.2.1-13) unstable; urgency=medium
+
+ * Backport libkmod.patch from upstream develop branch and add build-dep
+ on libkmod-dev. Definitively fixes all issues with multiple kernel
+ modules loading/unloading.
+ * Remove Ubuntu modprobe hack from debian/rules
+ * Add restart-bumblebeed dpkg-trigger, to be used by update-glx when
+ changing the provider of libglx.so and the nvidia kernel module.
+
+ -- Luca Boccassi <luca.boccassi@gmail.com> Sat, 11 Jun 2016 12:49:56 +0100
+
+bumblebee (3.2.1-12) unstable; urgency=medium
+
+ [ Luca Boccassi ]
+ * Set nvidia lib directory to /usr/lib/nvidia/nvidia to solve
+ incompatibility between Bumblebee and concurrent installations of
+ current plus legacyYYYxx Nvidia driver series on the same system.
+ * Add ignore-systemd-logind-noise.patch and
+ ignore-failure-to-set-DRM-interface.patch to ignore red herrings.
+ (Closes: #822665)
+ * Set Ubuntu default kernel driver to nvidia, which is provided as a
+ modprobe alias by the nvidia-XYZ packages.
+
+ [ Vincent Cheng ]
+ * Use dh_strip --dbgsym-migration to cleanly migrate from old-style dbg
+ packages to autogenerated dbgsym packages.
+
+ -- Luca Boccassi <luca.boccassi@gmail.com> Wed, 18 May 2016 00:17:59 +0100
+
+bumblebee (3.2.1-11) unstable; urgency=medium
+
+ [ Andreas Beckmann ]
+ * Team upload.
+ * Drop -dbg package in favor of autogenerated -dbgsym packages.
+ * Update Vcs-* URLs.
+ * Update Standards version to 3.9.8, no changes required.
+ * Drop obsolete Debian NVIDIA package alternatives.
+ * Add support for the 304xx/340xx legacy driver packages available in
+ Debian. (Closes: #802479, #717687)
+ * Use vendor-specific maintainer scripts.
+ * Add Luca Boccassi to Uploaders.
+
+ [ Luca Boccassi ]
+ * Mention kernel cmdline workaround for nvidia module load issues on
+ some hardware, and related upstream tickets, in README.Debian.
+ (Closes: #822330)
+ * Run dh --with autoreconf to regenerate configure, Makefile, etc.
+ * Add xorg-binary-config.patch to allow changing the Xorg binary in
+ bumblebee.conf.
+ * Add dependency on xserver-xorg-core >= 1.18 and set default binary
+ to /usr/lib/xorg/Xorg in order to support xserver-xorg-legacy.
+ (Closes: #815888)
+ * Add 358, 361, 364 in alternate dep and blacklist.
+ * Install modprobe blacklist in /usr/share/bumblebee/modprobe.d/ to avoid
+ clash with the daemon config file.
+ * Delete /etc/modprobe.d/bumblebee.conf already when bumblebee is removed,
+ to not keep the blacklists active until it is purged. (LP: #1242785)
+
+ -- Andreas Beckmann <anbe@debian.org> Sat, 07 May 2016 23:42:16 +0200
+
+bumblebee (3.2.1-10) unstable; urgency=medium
+
+ * Team upload.
+ * Blacklist the nvidia legacy kernel modules available in Debian.
+ * Use the new /usr/lib/nvidia/bumblebee glx alternative.
+ (Closes: #802310, #802245)
+ * Add Depends: glx-alternative-nvidia (>= 0.6.92) (only for Debian).
+ * Trigger the glx-alternative-nvidia package after updating the alternative.
+ * fix-typos.patch: New, fix some typos noticed by Lintian.
+
+ -- Andreas Beckmann <anbe@debian.org> Wed, 21 Oct 2015 02:14:27 +0200
+
+bumblebee (3.2.1-9) unstable; urgency=medium
+
+ [ Luca Boccassi ]
+ * Add modprobe remove in bumblebee.conf on Ubuntu to fix timeout when
+ unloading nvidia-uvm.
+
+ [ Vincent Cheng ]
+ * Add nvidia-355 in alternate dep and blacklist.
+
+ -- Vincent Cheng <vcheng@debian.org> Fri, 14 Aug 2015 23:58:12 -0700
+
+bumblebee (3.2.1-8) unstable; urgency=medium
+
+ [ Luca Boccassi ]
+ * Cherry-pick patch for modprobe -r instead of rmmod (Closes: #793389)
+ * Add nvidia-346, 349, and 352 in alternate dep and blacklist.
+ (LP: #1511560)
+
+ [ Vincent Cheng ]
+ * Move bumblebee bash-completion file from obsolete /etc/bash_completion.d/
+ to /usr/share/bash-completion/completions/.
+
+ -- Vincent Cheng <vcheng@debian.org> Sat, 25 Jul 2015 19:28:48 -0700
+
+bumblebee (3.2.1-7) unstable; urgency=medium
+
+ * Move conffile handling introduced in 3.2.1-6 from bumblebee-nvidia
+ to bumblebee.
+
+ -- Vincent Cheng <vcheng@debian.org> Sat, 25 Oct 2014 17:04:28 -0700
+
+bumblebee (3.2.1-6) unstable; urgency=medium
+
+ * Build with CONF_DRIVER_MODULE_NVIDIA=nvidia-current instead of nvidia.
+ * Stop treating /etc/modprobe.d/bumblebee.conf as a conffile and remove it
+ when removing bumblebee, not just when purging it. (LP: #1242785)
+ - Pre-Depends on dpkg >= 1.15.7.2 for dpkg-maintscript-helper rm_conffile.
+ * Add patches: fix-device-detection.patch, ignore-error-on-X-shutdown.patch,
+ cherry-picked from upstream git. (LP: #1230008)
+ * Allow more nvidia flavours to satisfy bumblebee-nvidia's dependencies
+ (relevant only for Ubuntu).
+ * Update debian/README.Debian.
+ * Update email address.
+ * Update Standards version to 3.9.6, no changes required.
+
+ -- Vincent Cheng <vcheng@debian.org> Sat, 25 Oct 2014 10:13:42 -0700
+
+bumblebee (3.2.1-5) unstable; urgency=medium
+
+ * Allow more nvidia flavours to satisfy bumblebee-nvidia's dependencies
+ (relevant only for Ubuntu). (LP: #1261180)
+ * Update Standards version to 3.9.5, no changes required.
+
+ -- Vincent Cheng <Vincentc1208@gmail.com> Mon, 06 Jan 2014 01:24:33 -0800
+
+bumblebee (3.2.1-4) unstable; urgency=low
+
+ * Use dh-systemd (for systemd-specific additions to maintscripts).
+ (Closes: #715270)
+ * Add bumblebee group as system group (gid in between 100-999) instead
+ of a regular group in postinst. (Closes: #718772)
+
+ -- Vincent Cheng <Vincentc1208@gmail.com> Tue, 20 Aug 2013 02:35:34 -0700
+
+bumblebee (3.2.1-3) unstable; urgency=low
+
+ * Append /usr/lib/primus to CONF_PRIMUS_LD_PATH in d/rules to ease
+ pre-multiarch backports. (Closes: #712665)
+ * Have bumblebee depend on bbswitch-dkms | bbswitch-source, and
+ bumblebee-nvidia depend on all possible m-a built nvidia modules.
+ * Add support for nvidia-325 packaged in Ubuntu (not relevant for Debian).
+
+ -- Vincent Cheng <Vincentc1208@gmail.com> Thu, 11 Jul 2013 01:18:07 -0700
+
+bumblebee (3.2.1-2) unstable; urgency=low
+
+ * Allow more nvidia flavours to satisfy bumblebee-nvidia's dependencies
+ (relevant for Ubuntu).
+
+ -- Vincent Cheng <Vincentc1208@gmail.com> Wed, 29 May 2013 01:45:35 -0700
+
+bumblebee (3.2.1-1) unstable; urgency=low
+
+ [ Aron Xu ]
+ * Initial release (Closes: #659440).
+ * Thanks to Peter Lekensteyn and Bruno Pagani, most stuff taken from the
+ packaging for Ubuntu PPA.
+
+ [ Vincent Cheng ]
+ * Thanks to Igor Urazov for lots of the Debian-specific portions of the
+ packaging.
+
+ -- Vincent Cheng <Vincentc1208@gmail.com> Fri, 03 May 2013 03:04:38 -0700
--- /dev/null
+Source: bumblebee
+Section: utils
+Priority: optional
+Maintainer: Debian NVIDIA Maintainers <pkg-nvidia-devel@lists.alioth.debian.org>
+Uploaders:
+ Aron Xu <aron@debian.org>,
+ Vincent Cheng <vcheng@debian.org>,
+ Yunqiang Su <wzssyqa@gmail.com>,
+ Luca Boccassi <bluca@debian.org>,
+Build-Depends:
+ debhelper-compat (= 12),
+ help2man,
+ libbsd-dev,
+ libglib2.0-dev,
+ libx11-dev,
+ pkg-config,
+ libkmod-dev,
+Rules-Requires-Root: no
+Standards-Version: 4.3.0
+Homepage: https://launchpad.net/~bumblebee
+Vcs-Browser: https://salsa.debian.org/nvidia-team/bumblebee
+Vcs-Git: https://salsa.debian.org/nvidia-team/bumblebee.git
+
+Package: bumblebee
+Architecture: linux-any
+Pre-Depends:
+ ${misc:Pre-Depends},
+Depends:
+ bbswitch-dkms | bbswitch-source,
+ lsb-base,
+ xserver-xorg-core (>= 2:1.18),
+ ${misc:Depends},
+ ${shlibs:Depends},
+Recommends:
+ virtualgl | primus,
+Suggests:
+ bumblebee-nvidia (= ${binary:Version}),
+Description: NVIDIA Optimus support for Linux
+ Bumblebee is an effort to make NVIDIA Optimus enabled laptops work in
+ GNU/Linux systems. These laptops are built in such a way that the NVIDIA
+ graphics card can be used on demand so that battery life is improved and
+ temperature is kept low.
+ .
+ It disables the discrete graphics card if no client is detected, and starts
+ an X server making use of NVIDIA card if requested then let software GL
+ implementations (such as VirtualGL) copy frames to the visible display that
+ runs on the integrated graphics. The ability to use discrete graphics
+ depends on the driver: open source nouveau and proprietary nvidia.
+
+Package: bumblebee-nvidia
+Architecture: amd64 i386
+Section: contrib/utils
+Depends:
+ bumblebee (= ${binary:Version}),
+ ${misc:Depends},
+ ${nvidia:Depends},
+# proprietary NVIDIA packages in Debian
+ nvidia-driver |
+ nvidia-legacy-390xx-driver |
+ nvidia-legacy-340xx-driver |
+ nvidia-legacy-304xx-driver |
+ nvidia-kernel-dkms |
+ nvidia-legacy-390xx-kernel-dkms |
+ nvidia-legacy-340xx-kernel-dkms |
+ nvidia-legacy-304xx-kernel-dkms |
+# proprietary NVIDIA packages in Ubuntu
+ nvidia | nvidia-current | nvidia-current-updates | nvidia-driver-binary |
+ nvidia-304 | nvidia-304-updates | nvidia-experimental-304 |
+ nvidia-310 | nvidia-310-updates | nvidia-experimental-310 |
+ nvidia-313 | nvidia-313-updates | nvidia-experimental-313 |
+ nvidia-319 | nvidia-319-updates | nvidia-experimental-319 |
+ nvidia-325 | nvidia-325-updates | nvidia-experimental-325 |
+ nvidia-331 | nvidia-331-updates | nvidia-experimental-331 |
+ nvidia-334 | nvidia-334-updates | nvidia-experimental-334 |
+ nvidia-337 | nvidia-337-updates | nvidia-experimental-337 |
+ nvidia-340 | nvidia-340-updates | nvidia-experimental-340 |
+ nvidia-343 | nvidia-343-updates | nvidia-experimental-343 |
+ nvidia-346 | nvidia-346-updates | nvidia-experimental-346 |
+ nvidia-349 | nvidia-349-updates | nvidia-experimental-349 |
+ nvidia-352 | nvidia-352-updates | nvidia-experimental-352 |
+ nvidia-355 | nvidia-355-updates | nvidia-experimental-355 |
+ nvidia-358 | nvidia-358-updates | nvidia-experimental-358 |
+ nvidia-361 | nvidia-361-updates | nvidia-experimental-361 |
+ nvidia-364 | nvidia-364-updates | nvidia-experimental-364 |
+ nvidia-367 | nvidia-367-updates | nvidia-experimental-367 |
+ nvidia-375 | nvidia-375-updates | nvidia-experimental-375 |
+ nvidia-378 | nvidia-378-updates | nvidia-experimental-378 |
+ nvidia-381 | nvidia-381-updates | nvidia-experimental-381 |
+ nvidia-384 | nvidia-384-updates | nvidia-experimental-384 |
+ nvidia-387 | nvidia-387-updates | nvidia-experimental-387 |
+ nvidia-driver-390 |
+ nvidia-driver-410
+Description: NVIDIA Optimus support using the proprietary NVIDIA driver
+ This metapackage ensures that the proprietary NVIDIA driver is installed in a
+ way such that 3D acceleration does not break. It does so by configuring the
+ OpenGL library path to use the Mesa graphics library.
--- /dev/null
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: bumblebee
+Source: https://github.com/Bumblebee-Project/Bumblebee
+
+Files: *
+Copyright: 2011-2013 Bumblebee Project <bumblebee@lists.launchpad.net>
+License: GPL-3.0+
+
+Files: debian/*
+Copyright: 2011-2013 Peter Lekensteyn <lekensteyn@gmail.com>
+ 2011-2013 Bruno Pagani <bruno.n.pagani@gmail.com>
+ 2012 Igor Urazov <z0rc3r@gmail.com>
+ 2013 Aron Xu <aron@debian.org>
+ 2013 Vincent Cheng <vcheng@debian.org>
+License: GPL-3.0+
+
+License: GPL-3.0+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+ .
+ This package is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+ .
+ On Debian systems, the complete text of the GNU General
+ Public License version 3 can be found in "/usr/share/common-licenses/GPL-3".
--- /dev/null
+Description: Support for AMD APU+NVIDIA setup
+Origin: upstream, https://github.com/Bumblebee-Project/Bumblebee/pull/1009
+--- a/src/bumblebeed.c
++++ b/src/bumblebeed.c
+@@ -464,12 +464,19 @@ int main(int argc, char* argv[]) {
+
+ /* First look for an intel card */
+ struct pci_bus_id *pci_id_igd = pci_find_gfx_by_vendor(PCI_VENDOR_ID_INTEL, 0);
++
++ /* Then look for an amd card */
++ if (!pci_id_igd) {
++ bb_log(LOG_INFO, "No Intel video card found, testing for system with an AMD APU.\n");
++ pci_id_igd = pci_find_gfx_by_vendor(PCI_VENDOR_ID_AMD, 0);
++ }
++
+ if (!pci_id_igd) {
+ /* This is no Optimus configuration. But maybe it's a
+ dual-nvidia configuration. Let us test that.
+ */
+ pci_id_igd = pci_find_gfx_by_vendor(PCI_VENDOR_ID_NVIDIA, 1);
+- bb_log(LOG_INFO, "No Intel video card found, testing for dual-nvidia system.\n");
++ bb_log(LOG_INFO, "No Intel/AMD video card found, testing for dual-nvidia system.\n");
+
+ if (!pci_id_igd) {
+ /* Ok, this is not a double gpu setup supported (there is at most
+--- a/src/pci.h
++++ b/src/pci.h
+@@ -21,6 +21,7 @@
+ #pragma once
+ #include <sys/types.h> /* necessary for int32_t */
+
++#define PCI_VENDOR_ID_AMD 0x1002
+ #define PCI_VENDOR_ID_NVIDIA 0x10de
+ #define PCI_VENDOR_ID_INTEL 0x8086
+ #define PCI_CLASS_DISPLAY_VGA 0x0300
--- /dev/null
+Description: Fix detection of devices on bus numbers larger than 9
+Origin: upstream, https://github.com/Bumblebee-Project/Bumblebee/commit/2073f8537412aa47755eb6f3f22a114403e5285b
+Bug: https://github.com/Bumblebee-Project/Bumblebee/issues/573
+
+--- a/src/bbsecondary.c
++++ b/src/bbsecondary.c
+@@ -138,7 +138,7 @@
+ if (!bb_is_running(bb_status.x_pid)) {
+ char pci_id[12];
+ static char *x_conf_file;
+- snprintf(pci_id, 12, "PCI:%02x:%02x:%o", pci_bus_id_discrete->bus,
++ snprintf(pci_id, 12, "PCI:%02d:%02d:%o", pci_bus_id_discrete->bus,
+ pci_bus_id_discrete->slot, pci_bus_id_discrete->func);
+ if (!x_conf_file) {
+ x_conf_file = xorg_path_w_driver(bb_config.x_conf_file, bb_config.driver);
--- /dev/null
+Author: Andreas Beckmann <anbe@debian.org>
+Description: fix some typos found by Lintian
+
+--- a/src/bbconfig.c
++++ b/src/bbconfig.c
+@@ -201,11 +201,11 @@ void print_usage(int exit_val) {
+ }
+ /* common options */
+ fputs("\
+- -q, --quiet, --silent supresses all logging messages\n\
++ -q, --quiet, --silent suppresses all logging messages\n\
+ -v, --verbose increase the verbosity level of log messages. It\n\
+ can be specified up to two times (or five if\n\
+ --quiet is used)\n\
+- --debug show all logging messsages by setting the verbosity\n\
++ --debug show all logging messages by setting the verbosity\n\
+ level to the maximum\n\
+ -C, --config FILE retrieve settings for Bumblebee from FILE\n", out);
+ if (is_optirun) {
+--- a/src/module.c
++++ b/src/module.c
+@@ -64,7 +64,7 @@ int module_is_loaded(char *driver) {
+ *
+ * @param module_name The filename of the module to be loaded
+ * @param driver The name of the driver to be loaded
+- * @return 1 if the driver is succesfully loaded, 0 otherwise
++ * @return 1 if the driver is successfully loaded, 0 otherwise
+ */
+ int module_load(char *module_name, char *driver) {
+ if (module_is_loaded(driver) == 0) {
+@@ -89,7 +89,7 @@ int module_load(char *module_name, char
+ * giving up
+ *
+ * @param driver The name of the driver (not a filename)
+- * @return 1 if the driver is succesfully unloaded, 0 otherwise
++ * @return 1 if the driver is successfully unloaded, 0 otherwise
+ */
+ int module_unload(char *driver) {
+ if (module_is_loaded(driver) == 1) {
+--- a/src/optirun.c
++++ b/src/optirun.c
+@@ -62,7 +62,7 @@ static void handle_signal(int sig) {
+
+ /**
+ * Prints the status of the Bumblebee server if available
+- * @return EXIT_SUCCESS if the status is succesfully retrieved,
++ * @return EXIT_SUCCESS if the status is successfully retrieved,
+ * EXIT_FAILURE otherwise
+ */
+ static int report_daemon_status(void) {
+--- a/src/switch/sw_bbswitch.c
++++ b/src/switch/sw_bbswitch.c
+@@ -98,7 +98,7 @@ int bbswitch_is_available(struct switch_
+ * recognized by bbswitch. Assuming that vga_switcheroo was not told to OFF
+ * the device */
+ if (module_load("bbswitch", "bbswitch")) {
+- bb_log(LOG_DEBUG, "succesfully loaded bbswitch\n");
++ bb_log(LOG_DEBUG, "successfully loaded bbswitch\n");
+ /* hurrah, bbswitch could be loaded which means that the module is
+ * available and that the card is supported */
+ return 1;
+--- a/src/bbrun.c
++++ b/src/bbrun.c
+@@ -170,7 +170,7 @@ int bb_run_fork(char **argv, int detache
+ exitcode = 128 + WTERMSIG(status);
+ }
+ } else {
+- bb_log(LOG_ERR, "waitpid(%i) faild with %s\n", pid, strerror(errno));
++ bb_log(LOG_ERR, "waitpid(%i) failed with %s\n", pid, strerror(errno));
+ }
+ pidlist_remove(pid);
+ } else {
--- /dev/null
+Description: Ignore error on X shutdown
+Origin: upstream, https://github.com/Bumblebee-Project/Bumblebee/commit/25387e92822fb1a56fa43f1f9f636b987018d068
+
+--- a/src/bblogger.c
++++ b/src/bblogger.c
+@@ -144,7 +144,8 @@
+ /* Error lines are errors. */
+ if (strncmp(string, "(EE)", 4) == 0){
+ if (strstr(string, "Failed to load module \"kbd\"") ||
+- strstr(string, "No input driver matching")) {
++ strstr(string, "No input driver matching") ||
++ strstr(string, "Server terminated successfully")) {
+ /* non-fatal errors */
+ prio = LOG_DEBUG;
+ } else {
--- /dev/null
+From: Luca Boccassi <luca.boccassi@gmail.com>
+Date: Sat, 14 May 2016 21:44:00 +0100
+Subject: Ignore failure to set DRM interface
+
+This always fail due to problems in libdrm, but does not affect
+Bumblebee's functionality. See GH-652 for more details.
+---
+ src/bblogger.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/src/bblogger.c b/src/bblogger.c
+index c882275..ba3787e 100644
+--- a/src/bblogger.c
++++ b/src/bblogger.c
+@@ -146,6 +146,7 @@ static void parse_xorg_output(char * string){
+ if (strstr(string, "Failed to load module \"kbd\"") ||
+ strstr(string, "No input driver matching") ||
+ strstr(string, "systemd-logind: failed to get session:") ||
++ strstr(string, "failed to set DRM interface version 1.4:") ||
+ strstr(string, "Server terminated successfully")) {
+ /* non-fatal errors */
+ prio = LOG_DEBUG;
--- /dev/null
+From: Peter Wu <peter@lekensteyn.nl>
+Date: Thu, 30 Oct 2014 10:22:07 +0100
+Subject: Ignore systemd-logind noise
+
+This "error" appears when not run under logind. As it is not fatal,
+ignore it. (It also appears on my KDE desktop using KDM.)
+
+Error message reported in bugs GH-600, GH-582.
+---
+ src/bblogger.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/src/bblogger.c b/src/bblogger.c
+index aaadba9..c882275 100644
+--- a/src/bblogger.c
++++ b/src/bblogger.c
+@@ -145,6 +145,7 @@ static void parse_xorg_output(char * string){
+ if (strncmp(string, "(EE)", 4) == 0){
+ if (strstr(string, "Failed to load module \"kbd\"") ||
+ strstr(string, "No input driver matching") ||
++ strstr(string, "systemd-logind: failed to get session:") ||
+ strstr(string, "Server terminated successfully")) {
+ /* non-fatal errors */
+ prio = LOG_DEBUG;
+@@ -201,7 +202,7 @@ static void parse_xorg_output(char * string){
+ }
+ }
+ }
+-
++
+ /* do the actual logging */
+ bb_log(prio, "[XORG] %s\n", string);
+ }
--- /dev/null
+From: =?utf-8?q?Ond=C5=99ej_Jano=C5=A1=C3=ADk?= <j.ondra14@gmail.com>
+Date: Thu, 5 May 2016 18:48:43 +0200
+Subject: module: use libkmod2 instead of modprobe
+
+---
+ Makefile.am | 8 +--
+ README.markdown | 1 +
+ configure.ac | 1 +
+ src/bbconfig.c | 12 ++--
+ src/bbconfig.h | 2 +
+ src/bblogger.c | 4 +-
+ src/bumblebeed.c | 12 ++++
+ src/module.c | 185 +++++++++++++++++++++++++++++++++++++------------------
+ src/optirun.c | 1 -
+ 9 files changed, 152 insertions(+), 74 deletions(-)
+
+diff --git a/Makefile.am b/Makefile.am
+index 0f38a54..25e32d5 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -10,7 +10,7 @@ AM_CPPFLAGS = ${regular_CPPFLAGS} \
+ -DCONF_XORG='"$(bumblebeedconfdir)/xorg.conf.DRIVER"' \
+ -DCONF_XORG_DIR='"$(bumblebeedconfdir)/xorg.conf.d"'
+ AM_CFLAGS = ${regular_CFLAGS} \
+- ${x11_CFLAGS} ${libbsd_CFLAGS} ${glib_CFLAGS} \
++ ${x11_CFLAGS} ${libbsd_CFLAGS} ${glib_CFLAGS} ${kmod_CFLAGS} \
+ -Wextra -funsigned-char -DGITVERSION='"${GITVERSION}"'
+
+ noinst_SCRIPTS = scripts/systemd/bumblebeed.service \
+@@ -49,13 +49,13 @@ sbin_PROGRAMS = bin/bumblebeed
+ bin_PROGRAMS = bin/optirun
+
+ bin_optirun_SOURCES = src/module.c src/bbconfig.c src/bblogger.c src/bbrun.c \
+- src/bbsocket.c src/driver.c src/optirun.c src/bbsocketclient.c
+-bin_optirun_LDADD = ${glib_LIBS} -lrt
++ src/bbsocket.c src/optirun.c src/bbsocketclient.c
++bin_optirun_LDADD = ${glib_LIBS} ${kmod_LIBS} -lrt
+ bin_bumblebeed_SOURCES = src/pci.c src/bbconfig.c src/bblogger.c src/bbrun.c \
+ src/bbsocket.c src/module.c src/bbsecondary.c src/switch/switching.c \
+ src/switch/sw_bbswitch.c src/switch/sw_switcheroo.c \
+ src/driver.c src/bumblebeed.c
+-bin_bumblebeed_LDADD = ${x11_LIBS} ${libbsd_LIBS} ${glib_LIBS} -lrt
++bin_bumblebeed_LDADD = ${x11_LIBS} ${libbsd_LIBS} ${glib_LIBS} ${kmod_LIBS} -lrt
+
+ dist_doc_DATA = $(relnotes) README.markdown
+ bumblebeedconf_DATA = conf/bumblebee.conf conf/xorg.conf.nouveau conf/xorg.conf.nvidia
+diff --git a/README.markdown b/README.markdown
+index b534a6c..5c2baa5 100644
+--- a/README.markdown
++++ b/README.markdown
+@@ -19,6 +19,7 @@ The following packages are dependencies for the build process:
+ - pkg-config
+ - glib-2.0 and development headers
+ - libx11 and development headers
++- libkmod2 and development headers
+ - libbsd and development headers (if pidfile support is enabled, default yes)
+ - help2man (optional, it is needed for building manual pages)
+
+diff --git a/configure.ac b/configure.ac
+index 4e22314..d5194b8 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -132,6 +132,7 @@ AC_SUBST([regular_CFLAGS])
+ # Checks for header files.
+ PKG_CHECK_MODULES([x11], [x11])
+ PKG_CHECK_MODULES([glib], [glib-2.0])
++PKG_CHECK_MODULES([kmod], [libkmod])
+ AS_IF([test "x$with_pidfile" != xno], [
+ PKG_CHECK_MODULES([libbsd], [libbsd >= 0.2.0])
+ PKG_CHECK_EXISTS([libbsd = 0.2.0], [AC_DEFINE(HAVE_LIBBSD_020)])
+diff --git a/src/bbconfig.c b/src/bbconfig.c
+index 4f5ac7a..62a3306 100644
+--- a/src/bbconfig.c
++++ b/src/bbconfig.c
+@@ -251,12 +251,6 @@ Bumblebee homepage: <http://Bumblebee-Project.org/>\n", out);
+ */
+ static int bbconfig_parse_common(int opt, char *value) {
+ switch (opt) {
+- case 'q'://quiet mode
+- bb_status.verbosity = VERB_NONE;
+- break;
+- case OPT_DEBUG://debug mode
+- bb_status.verbosity = VERB_ALL;
+- break;
+ case 'd'://X display number
+ set_string_value(&bb_config.x_display, value);
+ break;
+@@ -307,6 +301,12 @@ void bbconfig_parse_opts(int argc, char *argv[], int conf_round) {
+ bb_status.verbosity++;
+ }
+ break;
++ case 'q'://quiet mode
++ bb_status.verbosity = VERB_NONE;
++ break;
++ case OPT_DEBUG://debug mode
++ bb_status.verbosity = VERB_ALL;
++ break;
+ case 's': /* Unix socket to use for communication */
+ set_string_value(&bb_config.socket_path, optarg);
+ break;
+diff --git a/src/bbconfig.h b/src/bbconfig.h
+index 656286b..a19f5d3 100644
+--- a/src/bbconfig.h
++++ b/src/bbconfig.h
+@@ -26,6 +26,7 @@
+ #include <unistd.h> //for pid_t
+ #include <limits.h> //for CHAR_MAX
+ #include <glib.h>
++#include <libkmod.h>
+
+ /* Daemon states */
+ #define BB_DAEMON 1
+@@ -118,6 +119,7 @@ struct bb_status_struct {
+ int x_pipe[2];//pipes for reading/writing output from X's stdout/stderr
+ gboolean use_syslog;
+ char *program_name;
++ struct kmod_ctx *kmod_ctx;
+ };
+
+ /* Structure containing the configuration. */
+diff --git a/src/bblogger.c b/src/bblogger.c
+index ba3787e..7c13c93 100644
+--- a/src/bblogger.c
++++ b/src/bblogger.c
+@@ -228,7 +228,7 @@ void check_xorg_pipe(void){
+ /* line / buffer is full, process the remaining buffer the next round */
+ repeat = 1;
+ }
+- }else{
++ } else {
+ if (r == 0 || (errno != EAGAIN && r == -1)){
+ /* the pipe is closed/invalid. Clean up. */
+ if (bb_status.x_pipe[0] != -1){close(bb_status.x_pipe[0]); bb_status.x_pipe[0] = -1;}
+@@ -257,5 +257,5 @@ void check_xorg_pipe(void){
+ memmove(x_output_buffer, next_part, x_buffer_pos);
+ }
+ }
+- }while(repeat);
++ }while (repeat);
+ }/* check_xorg_pipe */
+diff --git a/src/bumblebeed.c b/src/bumblebeed.c
+index a911da9..6e0ade5 100644
+--- a/src/bumblebeed.c
++++ b/src/bumblebeed.c
+@@ -34,6 +34,7 @@
+ #include <string.h>
+ #include <errno.h>
+ #include <getopt.h>
++#include <libkmod.h>
+ #ifdef WITH_PIDFILE
+ #ifdef HAVE_LIBBSD_020
+ #include <libutil.h>
+@@ -488,6 +489,14 @@ int main(int argc, char* argv[]) {
+
+ free(pci_id_igd);
+
++ // kmod context have to be available for driver detection
++ bb_status.kmod_ctx = kmod_new(NULL, NULL);
++ if (bb_status.kmod_ctx == NULL) {
++ bb_log(LOG_ERR, "kmod_new() failed!\n");
++ bb_closelog();
++ exit(EXIT_FAILURE);
++ }
++
+ GKeyFile *bbcfg = bbconfig_parse_conf();
+ bbconfig_parse_opts(argc, argv, PARSE_STAGE_DRIVER);
+ driver_detect();
+@@ -500,6 +509,7 @@ int main(int argc, char* argv[]) {
+
+ /* dump the config after detecting the driver */
+ config_dump();
++
+ if (config_validate() != 0) {
+ return (EXIT_FAILURE);
+ }
+@@ -572,5 +582,7 @@ int main(int argc, char* argv[]) {
+ //close X pipe, if any parts of it are open still
+ if (bb_status.x_pipe[0] != -1){close(bb_status.x_pipe[0]); bb_status.x_pipe[0] = -1;}
+ if (bb_status.x_pipe[1] != -1){close(bb_status.x_pipe[1]); bb_status.x_pipe[1] = -1;}
++ //cleanup kmod context
++ kmod_unref(bb_status.kmod_ctx);
+ return (EXIT_SUCCESS);
+ }
+diff --git a/src/module.c b/src/module.c
+index bb32e15..ef3e84c 100644
+--- a/src/module.c
++++ b/src/module.c
+@@ -24,91 +24,152 @@
+ #include <ctype.h>
+ #include <stdlib.h>
+ #include <unistd.h>
++#include <libkmod.h>
++#include <errno.h>
+ #include "module.h"
+ #include "bblogger.h"
+ #include "bbrun.h"
++#include "bbconfig.h"
++
++int module_unload_recursive(struct kmod_module *mod);
+
+ /**
+- * Checks in /proc/modules whether a kernel module is loaded
++ * Checks whether a kernel module is loaded
+ *
+ * @param driver The name of the driver (not a filename)
+ * @return 1 if the module is loaded, 0 otherwise
+ */
+ int module_is_loaded(char *driver) {
+- // use the same buffer length as lsmod
+- char buffer[4096];
+- FILE * bbs = fopen("/proc/modules", "r");
+- int ret = 0;
+- /* assume mod_len <= sizeof(buffer) */
+- int mod_len = strlen(driver);
++ int err, state;
++ struct kmod_module *mod;
+
+- if (bbs == 0) {//error opening, return -1
+- bb_log(LOG_DEBUG, "Couldn't open /proc/modules");
+- return -1;
++ err = kmod_module_new_from_name(bb_status.kmod_ctx, driver, &mod);
++ if (err < 0) {
++ bb_log(LOG_DEBUG, "kmod_module_new_from_name(%s) failed (err: %d).\n",
++ driver, err);
++ return 0;
+ }
+- while (fgets(buffer, sizeof(buffer), bbs)) {
+- /* match "module" with "module " and not "module-blah" */
+- if (!strncmp(buffer, driver, mod_len) && isspace(buffer[mod_len])) {
+- /* module is found */
+- ret = 1;
+- break;
+- }
+- }
+- fclose(bbs);
+- return ret;
++
++ state = kmod_module_get_initstate(mod);
++ kmod_module_unref(mod);
++
++ return state == KMOD_MODULE_LIVE;
+ }
+
+ /**
+- * Attempts to load a module. If the module has not been loaded after ten
+- * seconds, give up
++ * Attempts to load a module.
+ *
+ * @param module_name The filename of the module to be loaded
+ * @param driver The name of the driver to be loaded
+ * @return 1 if the driver is successfully loaded, 0 otherwise
+ */
+ int module_load(char *module_name, char *driver) {
++ int err = 0;
++ int flags = KMOD_PROBE_IGNORE_LOADED;
++ struct kmod_list *l, *list = NULL;
++
+ if (module_is_loaded(driver) == 0) {
+ /* the module has not loaded yet, try to load it */
+- bb_log(LOG_INFO, "Loading driver %s (module %s)\n", driver, module_name);
+- char *mod_argv[] = {
+- "modprobe",
+- module_name,
+- NULL
+- };
+- bb_run_fork_wait(mod_argv, 10);
+- if (module_is_loaded(driver) == 0) {
+- bb_log(LOG_ERR, "Module %s could not be loaded (timeout?)\n", module_name);
++
++ bb_log(LOG_INFO, "Loading driver '%s' (module '%s')\n", driver, module_name);
++ err = kmod_module_new_from_lookup(bb_status.kmod_ctx, module_name, &list);
++
++ if (err < 0) {
++ bb_log(LOG_DEBUG, "kmod_module_new_from_lookup(%s) failed (err: %d).\n",
++ module_name, err);
++ return 0;
++ }
++
++ if (list == NULL) {
++ bb_log(LOG_ERR, "Module '%s' not found.\n", module_name);
+ return 0;
+ }
++
++ kmod_list_foreach(l, list) {
++ struct kmod_module *mod = kmod_module_get_module(l);
++
++ bb_log(LOG_DEBUG, "Loading module '%s'.\n", kmod_module_get_name(mod));
++ err = kmod_module_probe_insert_module(mod, flags, NULL, NULL, NULL, 0);
++
++ if (err < 0) {
++ bb_log(LOG_DEBUG, "kmod_module_probe_insert_module(%s) failed (err: %d).\n",
++ kmod_module_get_name(mod), err);
++ }
++
++ kmod_module_unref(mod);
++
++ if (err < 0) {
++ break;
++ }
++ }
++
++ kmod_module_unref_list(list);
++ }
++
++ return err >= 0;
++}
++
++/**
++ * Unloads module and modules that are depending on this module.
++ *
++ * @param mod Reference to libkmod module
++ * @return 1 if the module is successfully unloaded, 0 otherwise
++ */
++int module_unload_recursive(struct kmod_module *mod) {
++ int err = 0, flags = 0, refcnt;
++ struct kmod_list *holders;
++
++ holders = kmod_module_get_holders(mod);
++ if (holders != NULL) {
++ struct kmod_list *itr;
++
++ kmod_list_foreach(itr, holders) {
++ struct kmod_module *hm = kmod_module_get_module(itr);
++ err = module_unload_recursive(hm);
++ kmod_module_unref(hm);
++
++ if (err < 0) {
++ break;
++ }
++ }
++ kmod_module_unref_list(holders);
+ }
+- return 1;
++
++ refcnt = kmod_module_get_refcnt(mod);
++ if (refcnt == 0) {
++ bb_log(LOG_INFO, "Unloading module %s\n", kmod_module_get_name(mod));
++ err = kmod_module_remove_module(mod, flags);
++ } else {
++ bb_log(LOG_ERR, "Failed to unload module '%s' (ref count: %d).\n",
++ kmod_module_get_name(mod), refcnt);
++ err = 1;
++ }
++
++ return err == 0;
+ }
+
+ /**
+- * Attempts to unload a module if loaded, for ten seconds before
+- * giving up
++ * Attempts to unload a module if loaded.
+ *
+ * @param driver The name of the driver (not a filename)
+ * @return 1 if the driver is successfully unloaded, 0 otherwise
+ */
+ int module_unload(char *driver) {
++ int err;
++ struct kmod_module *mod;
+ if (module_is_loaded(driver) == 1) {
+- int retries = 30;
+- bb_log(LOG_INFO, "Unloading %s driver\n", driver);
+- char *mod_argv[] = {
+- "modprobe",
+- "-r",
+- driver,
+- NULL
+- };
+- bb_run_fork_wait(mod_argv, 10);
+- while (retries-- > 0 && module_is_loaded(driver) == 1) {
+- usleep(100000);
+- }
+- if (module_is_loaded(driver) == 1) {
+- bb_log(LOG_ERR, "Unloading %s driver timed out.\n", driver);
++ err = kmod_module_new_from_name(bb_status.kmod_ctx, driver, &mod);
++
++ if (err < 0) {
++ bb_log(LOG_DEBUG, "kmod_module_new_from_name(%s) failed (err: %d).\n",
++ driver, err);
+ return 0;
+ }
++
++ err = module_unload_recursive(mod);
++ kmod_module_unref(mod);
++
++ return err;
+ }
+ return 1;
+ }
+@@ -120,18 +181,20 @@ int module_unload(char *driver) {
+ * @return 1 if the module is available for loading, 0 otherwise
+ */
+ int module_is_available(char *module_name) {
+- /* HACK to support call from optirun */
+- char *modprobe_bin = "/sbin/modprobe";
+- if (access(modprobe_bin, X_OK)) {
+- /* if /sbin/modprobe is not found, pray that PATH contains it */
+- modprobe_bin = "modprobe";
++ int err, available;
++ struct kmod_list *list = NULL;
++
++ err = kmod_module_new_from_lookup(bb_status.kmod_ctx, module_name, &list);
++
++ if (err < 0) {
++ bb_log(LOG_DEBUG, "kmod_module_new_from_lookup(%s) failed (err: %d).\n",
++ module_name, err);
++ return 0;
+ }
+- char *mod_argv[] = {
+- modprobe_bin,
+- "--dry-run",
+- "--quiet",
+- module_name,
+- NULL
+- };
+- return bb_run_fork(mod_argv, 1) == EXIT_SUCCESS;
++
++ available = list != NULL;
++
++ kmod_module_unref_list(list);
++
++ return available;
+ }
+diff --git a/src/optirun.c b/src/optirun.c
+index bcc6c13..f05f05c 100644
+--- a/src/optirun.c
++++ b/src/optirun.c
+@@ -37,7 +37,6 @@
+ #include "bbsocketclient.h"
+ #include "bblogger.h"
+ #include "bbrun.h"
+-#include "driver.h"
+
+
+ /**
--- /dev/null
+Description: switch from "rmmod" to "modprobe -r"
+ With the introduction of nvidia-uvm module, unloading nvidia module will fail
+ unless nvidia-uvm is unloaded. GH-565 suggests using "remove" or "softdep"
+ modprobe.d clauses to teach modprobe to handle that for us; "rmmod" does not
+ have that functionality, so switch to "modprobe -r".
+Origin: upstream, https://github.com/Bumblebee-Project/Bumblebee/commit/1ada79fe5916961fc4e4917f8c63bb184908d986
+Bug: https://github.com/Bumblebee-Project/Bumblebee/issues/565
+Bug-Debian: https://bugs.debian.org/793389
+
+--- a/src/module.c
++++ b/src/module.c
+@@ -96,7 +96,8 @@ int module_unload(char *driver) {
+ int retries = 30;
+ bb_log(LOG_INFO, "Unloading %s driver\n", driver);
+ char *mod_argv[] = {
+- "rmmod",
++ "modprobe",
++ "-r",
+ driver,
+ NULL
+ };
--- /dev/null
+Description: Add option to always unload the driver on exit
+Origin: upstream, https://github.com/Bumblebee-Project/Bumblebee/pull/983
+--- a/src/bbconfig.c
++++ b/src/bbconfig.c
+@@ -462,6 +462,10 @@ void bbconfig_parse_conf_driver(GKeyFile
+ g_free(module_name);
+ }
+ }
++ key = "AlwaysUnloadKernelDriver";
++ if (g_key_file_has_key(bbcfg, section, key, NULL)) {
++ bb_config.force_driver_unload = g_key_file_get_boolean(bbcfg, section, key, NULL);
++ }
+ key = "LibraryPath";
+ if (g_key_file_has_key(bbcfg, section, key, NULL)) {
+ free_and_set_value(&bb_config.ld_path, g_key_file_get_string(bbcfg, section, key, NULL));
+--- a/src/bbconfig.h
++++ b/src/bbconfig.h
+@@ -145,6 +145,7 @@ struct bb_config_struct {
+ char * module_name; /* Kernel module to be loaded for the driver.
+ * If empty, driver will be used. This is
+ * for Ubuntu which uses nvidia-current */
++ int force_driver_unload; /* Force driver unload, even without active PM method */
+ int card_shutdown_state;
+ #ifdef WITH_PIDFILE
+ char *pid_file; /* pid file for storing the daemons PID */
+--- a/src/bbsecondary.c
++++ b/src/bbsecondary.c
+@@ -223,24 +223,31 @@ bool start_secondary(bool need_secondary
+ static void switch_and_unload(void)
+ {
+ char driver[BUFFER_SIZE];
++ int unload_driver = 0;
+
+- if (bb_config.pm_method == PM_DISABLED && bb_status.runmode != BB_RUN_EXIT) {
++ if (bb_config.pm_method == PM_DISABLED && !bb_config.force_driver_unload && bb_status.runmode != BB_RUN_EXIT) {
+ /* do not disable the card if PM is disabled unless exiting */
+ return;
+ }
+
+ //if card is on and can be switched, switch it off
++ if (switcher && switcher->need_driver_unloaded) {
++ /* do not unload the drivers nor disable the card if the card is not on */
++ if (switcher->status() != SWITCH_ON) {
++ return;
++ }
++ unload_driver = 1;
++ }
++
++ if (unload_driver || bb_config.force_driver_unload) {
++ /* unload the driver loaded by the graphica card */
++ if (pci_get_driver(driver, pci_bus_id_discrete, sizeof driver)) {
++ module_unload(driver);
++ }
++ }
++
+ if (switcher) {
+ if (switcher->need_driver_unloaded) {
+- /* do not unload the drivers nor disable the card if the card is not on */
+- if (switcher->status() != SWITCH_ON) {
+- return;
+- }
+- /* unload the driver loaded by the graphica card */
+- if (pci_get_driver(driver, pci_bus_id_discrete, sizeof driver)) {
+- module_unload(driver);
+- }
+-
+ //only turn card off if no drivers are loaded
+ if (pci_get_driver(NULL, pci_bus_id_discrete, 0)) {
+ bb_log(LOG_DEBUG, "Drivers are still loaded, unable to disable card\n");
+--- a/conf/bumblebee.conf.in
++++ b/conf/bumblebee.conf.in
+@@ -62,6 +62,10 @@ LibraryPath=@CONF_LDPATH_NVIDIA@
+ # default Xorg modules path
+ XorgModulePath=@CONF_MODPATH_NVIDIA@
+ XorgConfFile=@BBCONFDIR@/xorg.conf.nvidia
++# If set to true, will always unload the kernel module(s) even with
++# PMMethod=none - useful for newer Optimus models on which the kernel power
++# management works out of the box to power the card on/off without bbswitch.
++AlwaysUnloadKernelDriver=false
+
+ ## Section with nouveau driver specific options, only parsed if Driver=nouveau
+ [driver-nouveau]
--- /dev/null
+fix-device-detection.patch
+ignore-error-on-X-shutdown.patch
+modprobe-r-instead-of-rmmod.patch
+fix-typos.patch
+xorg-binary-config.patch
+ignore-systemd-logind-noise.patch
+ignore-failure-to-set-DRM-interface.patch
+libkmod.patch
+amd-apu.patch
+no-bbswitch.patch
--- /dev/null
+From: Rogier 'DocWilco' Mulhuijzen <github@bsdchicks.com>
+Date: Sat, 27 Feb 2016 12:43:41 -0800
+Subject: Add config option to set Xorg binary to run
+
+Also add Xorg commandline binary to debug output
+---
+ Makefile.am | 1 +
+ conf/bumblebee.conf.in | 2 ++
+ configure.ac | 6 ++++++
+ src/bbconfig.c | 6 ++++++
+ src/bbconfig.h | 1 +
+ src/bbsecondary.c | 8 +++++++-
+ src/bbsecondary.h | 8 --------
+ 7 files changed, 23 insertions(+), 9 deletions(-)
+
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -70,6 +70,7 @@
+
+ do_subst = sed -e 's|[@]GITVERSION[@]|$(GITVERSION)|g' \
+ -e 's|[@]CONF_XDISP[@]|$(CONF_XDISP)|g' \
++ -e 's|[@]CONF_XORG_BINARY[@]|$(CONF_XORG_BINARY)|g' \
+ -e 's|[@]CONF_SOCKPATH[@]|$(CONF_SOCKPATH)|g' \
+ -e 's|[@]CONF_GID[@]|$(CONF_GID)|g' \
+ -e 's|[@]CONF_PM_METHOD[@]|$(CONF_PM_METHOD)|g' \
+--- a/conf/bumblebee.conf.in
++++ b/conf/bumblebee.conf.in
+@@ -22,6 +22,8 @@
+ Driver=@CONF_DRIVER@
+ # Directory with a dummy config file to pass as a -configdir to secondary X
+ XorgConfDir=@XCONFDDIR@
++# Xorg binary to run
++XorgBinary=@CONF_XORG_BINARY@
+
+ ## Client options. Will take effect on the next optirun executed.
+ [optirun]
+--- a/configure.ac
++++ b/configure.ac
+@@ -32,6 +32,16 @@
+ AC_DEFINE_SUBST(CONF_VGLCOMPRESS, "proxy", [vglclient transport method])
+ AC_DEFINE_SUBST(CONF_TURNOFFATEXIT, "false", [state of card when shutting off daemon])
+
++# OpenSUSE: /usr/bin/X -> /var/lib/X11/X -> /usr/bin/Xorg
++# Fedora, Arch Linux: /usr/bin/X -> /usr/bin/Xorg
++# Ubuntu: /usr/bin/X is a custom binary doing authorization and then executes
++# /etc/X11/X -> /usr/bin/Xorg
++AC_DEFINE_CONF(CONF_XORG_BINARY, [Xorg binary to run], [
++if test "x" = "x$CONF_XORG_BINARY"; then
++ CONF_XORG_BINARY=Xorg
++fi
++])
++
+ AC_DEFINE_CONF(CONF_BRIDGE, [optirun display/render bridge, valid values are auto (default), primus and virtualgl], [
+ case $CONF_BRIDGE in
+ auto|primus|virtualgl) ;;
+--- a/src/bbconfig.c
++++ b/src/bbconfig.c
+@@ -425,6 +425,10 @@
+ if (g_key_file_has_key(bbcfg, section, key, NULL)) {
+ free_and_set_value(&bb_config.x_conf_dir, g_key_file_get_string(bbcfg, section, key, NULL));
+ }
++ key = "XorgBinary";
++ if (g_key_file_has_key(bbcfg, section, key, NULL)) {
++ free_and_set_value(&bb_config.xorg_binary, g_key_file_get_string(bbcfg, section, key, NULL));
++ }
+ return bbcfg;
+ }
+
+@@ -517,6 +521,7 @@
+ set_string_value(&bb_config.gid_name, CONF_GID);
+ set_string_value(&bb_config.x_conf_file, CONF_XORG);
+ set_string_value(&bb_config.x_conf_dir, CONF_XORG_DIR);
++ set_string_value(&bb_config.xorg_binary, CONF_XORG_BINARY);
+ set_string_value(&bb_config.optirun_bridge, CONF_BRIDGE);
+ set_string_value(&bb_config.primus_ld_path, CONF_PRIMUS_LD_PATH);
+ set_string_value(&bb_config.vgl_compress, CONF_VGLCOMPRESS);
+@@ -550,6 +555,7 @@
+ #endif
+ bb_log(LOG_DEBUG, " xorg.conf file: %s\n", bb_config.x_conf_file);
+ bb_log(LOG_DEBUG, " xorg.conf.d dir: %s\n", bb_config.x_conf_dir);
++ bb_log(LOG_DEBUG, " Xorg binary: %s\n", bb_config.xorg_binary);
+ bb_log(LOG_DEBUG, " ModulePath: %s\n", bb_config.mod_path);
+ bb_log(LOG_DEBUG, " GID name: %s\n", bb_config.gid_name);
+ bb_log(LOG_DEBUG, " Power method: %s\n",
+--- a/src/bbconfig.h
++++ b/src/bbconfig.h
+@@ -122,6 +122,7 @@
+
+ /* Structure containing the configuration. */
+ struct bb_config_struct {
++ char * xorg_binary; /// Xorg binary to run.
+ char * x_display; /// X display number to use.
+ char * x_conf_file; /// Path to the X configuration file.
+ char * x_conf_dir; /// Path to the dummy X configuration directory.
+--- a/src/bbsecondary.c
++++ b/src/bbsecondary.c
+@@ -146,7 +146,7 @@
+
+ bb_log(LOG_INFO, "Starting X server on display %s.\n", bb_config.x_display);
+ char *x_argv[] = {
+- XORG_BINARY,
++ bb_config.xorg_binary,
+ bb_config.x_display,
+ "-config", x_conf_file,
+ "-configdir", bb_config.x_conf_dir,
+@@ -158,6 +158,12 @@
+ "-modulepath", bb_config.mod_path, // keep last
+ NULL
+ };
++ char **argvp;
++ bb_log(LOG_DEBUG, "X server command line:");
++ for (argvp = x_argv; argvp && *argvp; argvp++) {
++ bb_log(LOG_DEBUG, " %s", *argvp);
++ }
++ bb_log(LOG_DEBUG, "\n");
+ enum {n_x_args = sizeof(x_argv) / sizeof(x_argv[0])};
+ if (!*bb_config.mod_path) {
+ x_argv[n_x_args - 3] = 0; //remove -modulepath if not set
+--- a/src/bbsecondary.h
++++ b/src/bbsecondary.h
+@@ -20,14 +20,6 @@
+ */
+ #pragma once
+
+-/**
+- * OpenSUSE: /usr/bin/X -> /var/lib/X11/X -> /usr/bin/Xorg
+- * Fedora, Arch Linux: /usr/bin/X -> /usr/bin/Xorg
+- * Ubuntu: /usr/bin/X is a custom binary doing authorization and then executes
+- * /etc/X11/X -> /usr/bin/Xorg
+- */
+-#define XORG_BINARY "Xorg"
+-
+ /* PCI Bus ID of the discrete video card */
+ struct pci_bus_id *pci_bus_id_discrete;
+
--- /dev/null
+#!/usr/bin/make -f
+# -*- makefile -*-
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+VENDOR := $(shell dpkg-vendor --derives-from Ubuntu && echo Ubuntu || echo Debian)
+
+bbnv_depends_Debian = glx-alternative-nvidia (>= 0.6.92)
+bbnv_depends_Ubuntu =
+
+MAINTSCRIPTS_GENERATED = debian/bumblebee-nvidia.postinst
+MAINTSCRIPTS_GENERATED += debian/bumblebee-nvidia.postrm
+
+DPKG_EXPORT_BUILDFLAGS = 1
+export DEB_BUILD_MAINT_OPTIONS = hardening=+all
+include /usr/share/dpkg/default.mk
+
+%:
+ dh $@
+
+configure-for-Ubuntu:
+ dh_auto_configure -- \
+ CONF_DRIVER_MODULE_NVIDIA=nvidia \
+ CONF_LDPATH_NVIDIA=/usr/lib/nvidia-current:/usr/lib32/nvidia-current \
+ CONF_MODPATH_NVIDIA=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules \
+ CONF_PRIMUS_LD_PATH=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus \
+ CONF_XORG_BINARY=/usr/lib/xorg/Xorg
+
+configure-for-Debian:
+ dh_auto_configure -- \
+ CONF_DRIVER_MODULE_NVIDIA=nvidia \
+ CONF_LDPATH_NVIDIA=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia \
+ CONF_MODPATH_NVIDIA=/usr/lib/nvidia/nvidia,/usr/lib/xorg/modules \
+ CONF_PRIMUS_LD_PATH=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus \
+ CONF_XORG_BINARY=/usr/lib/xorg/Xorg
+
+override_dh_auto_configure: $(MAINTSCRIPTS_GENERATED)
+override_dh_auto_configure: configure-for-$(VENDOR)
+
+override_dh_auto_install:
+ dh_auto_install --destdir=debian/bumblebee/
+
+override_dh_clean:
+ dh_clean
+ $(RM) $(MAINTSCRIPTS_GENERATED)
+
+override_dh_install:
+ dh_install
+
+ # Install bash-completion file to non-obsolete directory
+ mkdir -p debian/bumblebee/usr/share/bash-completion/completions/
+ mv debian/bumblebee/etc/bash_completion.d/* \
+ debian/bumblebee/usr/share/bash-completion/completions/
+ rm -rf debian/bumblebee/etc/bash_completion.d/
+
+override_dh_installinit:
+ dh_installinit --name=bumblebeed
+
+override_dh_gencontrol:
+ dh_gencontrol -- -V'nvidia:Depends=$(bbnv_depends_$(VENDOR))'
+
+debian/%: debian/%.$(VENDOR)
+ cp -a $< $@
--- /dev/null
+3.0 (quilt)
--- /dev/null
+version=3
+https://github.com/Bumblebee-Project/Bumblebee/tags .*/v?(\d.*)\.(?:tgz|tbz2|tar\.(?:gz|bz2|xz))
projects / bumblebee.git / commitdiff