--- /dev/null
+rustc (1.20.0+dfsg1-2) unstable; urgency=medium
+
+ Starting from version 1.20.0+dfsg1-1 (i.e. the previous version) the Debian
+ packages of rustc no longer fail their build if any tests fail. In other
+ words, some tests might have failed when building this and future versions of
+ the package. This is due to lack of maintainer time to investigate failures.
+
+ Many previous test failures were reported to upstream and did not receive a
+ timely response, suggesting the failures were not important. I was then
+ forced to patch out the test to make the build proceed, so several tests were
+ being ignored in practise anyway.
+
+ This brings the Debian package in line with the Fedora package which also
+ ignores all test failures. (Many other distributions don't run tests at all.)
+
+ If you think that the Debian rustc package is miscompiling your program in a
+ way that the upstream distributed compiler doesn't, you may check the test
+ failures here:
+
+ https://buildd.debian.org/status/package.php?p=rustc
+
+ If you can identify a relevant test failure as well as the patches needed to
+ fix it (either to rustc or LLVM), this will speed up the processing of any
+ bug reports on the Debian side.
+
+ We will also examine these failures ourselves on a best-effort basis and
+ attempt to fix the more serious-looking ones.
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 16 Oct 2017 18:02:23 +0200
--- /dev/null
+Architecture-specific notes
+===========================
+
+armhf armel mips mipsel powerpc powerpcspe
+------------------------------------------
+
+We only ship debuginfo for libstd and not the compiler itself, otherwise builds
+run out of memory on the Debian buildds, with non-obvious and random errors.
+
+See https://github.com/rust-lang/rust/issues/45854 for details.
+
+If all your armhf build machines have ~8GB memory or more, you can experiment
+with disabling this work-around (i.e. revert to normal) in d/rules.
+
+wasm32
+------
+
+We ship two different wasm32 targets - wasm32-unknown-unknown and wasm32-wasi -
+in the libstd-rust-dev-wasm32-cross package.
+
+wasm32-unknown-unknown is suitable for web stuff, where you typically will need
+to depending on the rust-wasm-bindgen, js-sys, and web-sys crates. Here, calls
+to libstd stuff (such as println!()) will silently do nothing, as defined in
+``src/libstd/sys/wasm/fs.rs`` and explained in upstream #48564.
+
+wasm32-wasi is suitable for non-web stuff, and is closer to a "normal" target
+where you expect libstd to be available, and for println!() to actually print
+to stdout. If you just want to cross-compile a regular non-wasm library or
+program to wasm for whatever reason, and only want to run it natively and not
+inside a web browser, use this target.
+
+To run the generated wasm, you will need a runtime:
+
+- https://github.com/bytecodealliance/wasmtime
+- https://github.com/bytecodealliance/lucet
+- https://github.com/wasmerio/wasmer
+- https://nodejs.org/api/wasi.html (sadly Debian's is too old, ATTOW)
+
+The first 3 are actually also all written in Rust, so one day some of them may
+even be packaged for Debian.
+
+
+Cross-compiling
+===============
+
+Rust uses LLVM, so cross-compiling works a bit differently from the GNU
+toolchain. The most important difference is that there are no "cross"
+compilers, every compiler is already a cross compiler. All you need to do is
+install the standard libraries for each target architecture you want to compile
+to. For rustc, this is libstd-rust-dev, so your debian/control would look
+something like this:
+
+ Build-Depends:
+ [..]
+ rustc:native (>= $version),
+ libstd-rust-dev (>= $version),
+ [..]
+
+You need both, this is important. When Debian build toolchains satisfy the
+build-depends of a cross-build, (1) a "rustc:native" Build-Depends selects
+rustc for the native architecture, which is possible because it's "Multi-Arch:
+allowed", and this will implicitly pull in libstd-rust-dev also for the native
+architecture; and (2) a "libstd-rust-dev" Build-Depends implies libstd-rust-dev
+for the foreign architecture, since it's "Multi-Arch: same".
+
+You'll probably also want to add
+
+ include /usr/share/rustc/architecture.mk
+
+to your debian/rules. This sets some useful variables like DEB_HOST_RUST_TYPE.
+
+See the cargo package for an example.
+
+Terminology
+-----------
+
+The rust ecosystem generally uses the term "host" for the native architecture
+running the compiler, equivalent to DEB_BUILD_RUST_TYPE or "build" in GNU
+terminology, and "target" for the foreign architecture that the build products
+run on, equivalent to DEB_HOST_RUST_TYPE or "host" in GNU terminology. For
+example, rustc --version --verbose will output something like:
+
+ rustc 1.16.0
+ [..]
+ host: x86_64-unknown-linux-gnu
+
+And both rustc and cargo have --target flags:
+
+ $ rustc --help | grep '\-\-target'
+ --target TARGET Target triple for which the code is compiled
+ $ cargo build --help | grep '\-\-target'
+ --target TRIPLE Build for the target triple
+
+One major exception to this naming scheme is in CERTAIN PARTS OF the build
+scripts of cargo and rustc themselves, such as the `./configure` scripts and
+SOME PARTS of the `config.toml` files. Here, "build", "host" and "target" mean
+the same things they do in GNU toolchain terminology. However, IN OTHER PARTS
+OF the build scripts of cargo and rustc, as well as cargo and rustc's own
+output and logging messages, the term "host" and "target" mean as they do in
+the previous paragraph. Yes, it's a total mind fuck. :( Table for clarity:
+
+======================================= =============== ========================
+ Rust ecosystem, Some parts of the rustc
+GNU term / Debian envvar rustc and cargo and cargo build scripts
+======================================= =============== ========================
+build DEB_BUILD_{ARCH,RUST_TYPE} host build
+ the machine running the build
+--------------------------------------- --------------- ------------------------
+host DEB_HOST_{ARCH,RUST_TYPE} target host(s)
+ the machine the build products run on
+--------------------------------------- --------------- ------------------------
+only relevant when building a compiler
+target DEB_TARGET_{ARCH,RUST_TYPE} N/A target(s)
+ the one architecture that the built extra architectures
+ cross-compiler itself builds for to build "std" for
+--------------------------------------- --------------- ------------------------
+
+
+Porting to new architectures (on the same distro)
+=================================================
+
+As mentioned above, to cross-compile rust packages you need to install the rust
+standard library for each relevant foreign architecture. However, this is not
+needed when cross-compiling rustc itself; its build system will build any
+relevant foreign-architecture standard libraries automatically.
+
+Cross-build, in a schroot using sbuild
+--------------------------------------
+
+0. Set up an schroot for your native architecture, for sbuild:
+
+ sudo apt-get install sbuild
+ sudo sbuild-adduser $LOGNAME
+ newgrp sbuild # or log out and log back in
+ sudo sbuild-createchroot --include=eatmydata,ccache,gnupg unstable \
+ /srv/chroot/unstable-$(dpkg-architecture -qDEB_BUILD_ARCH)-sbuild \
+ http://deb.debian.org/debian
+
+ See https://wiki.debian.org/sbuild for more details.
+
+1. Build it:
+
+ sudo apt-get source --download-only rustc
+ sbuild --host=$new_arch rustc_*.dsc
+
+Cross-build, directly on your own system
+----------------------------------------
+
+0. Install the build-dependencies of rustc (including cargo and itself):
+
+ sudo dpkg --add-architecture $new_arch
+ sudo apt-get --no-install-recommends build-dep --host-architecture=$new_arch rustc
+
+1. Build it:
+
+ apt-get source --compile --host-architecture=$new_arch rustc
+
+Native-build using bundled upstream binary blobs
+------------------------------------------------
+
+Use the same instructions as given in "Bootstrapping" in debian/README.source
+in the source package, making sure to set the relevant architectures.
+
+Responsible distribution of cross-built binaries
+------------------------------------------------
+
+By nature, cross-builds do not run tests. These are important for rustc and
+many tests often fail on newly-supported architectures even if builds and
+cross-builds work fine. You should find some appropriate way to test your
+cross-built packages rather than blindly shipping them to users.
+
+For example, Debian experimental is an appropriate place to upload them, so
+that they can be installed and tested on Debian porter boxes, before being
+uploaded to unstable and distributed to users.
+
+
+Test failures
+=============
+
+Starting from version 1.20.0+dfsg1-1 the Debian packages of rustc no longer
+fail the overall build if > 0 tests fail. Instead, we allow up to around 5
+tests to fail. In other words, if you're reading this in a binary package,
+between 0 and 5 tests might have failed when building this.
+
+This is due to lack of maintainer time to investigate all failures. Many
+previous test failures were reported to upstream and did not receive a timely
+response, suggesting the failures were not important. I was then forced to
+patch out the test to make the build proceed, so several tests were being
+ignored in practise anyway.
+
+This brings the Debian package in line with the Fedora package which also
+ignores all test failures. (Many other distributions don't run tests at all.)
+
+If you think that the Debian rustc package is miscompiling your program in a
+way that the upstream distributed compiler doesn't, you may check the test
+failures here:
+
+https://buildd.debian.org/status/package.php?p=rustc
+
+If you can identify a relevant test failure, as well as the patches needed to
+fix it (either to rustc or LLVM), this will speed up the processing of any bug
+reports on the Debian side.
+
+We will also examine these failures ourselves on a best-effort basis and
+attempt to fix the more serious-looking ones.
+
+Uncommon architectures
+----------------------
+
+Debian release architectures armel and s390x currently have more test failures,
+being tracked by upstream here:
+
+- https://github.com/rust-lang/rust/issues/52493 armel
+- https://github.com/rust-lang/rust/issues/52491 s390x
+
+Ports architectures
+-------------------
+
+The number of allowed test failures on certain Debian ports architectures
+(currently powerpc, powerpcspe, sparc64, x32) is raised greatly to help unblock
+progress for porters. Of course, as a user this means you may run into more
+bugs than usual; as mentioned above bugs reports and patches are welcome.
+
+
+Shared libraries
+================
+
+For now, the shared libraries of Rust are private.
+The rational is the following:
+ * Upstream prefers static linking for now
+ - https://github.com/rust-lang/rust/issues/10209
+ * rust is still under heavy development. As far as we know, there is
+ no commitement from upstream to provide a stable ABI for now.
+ Until we know more, we cannot take the chance to have Rust-built packages
+ failing at each release of the compiler.
+ * Static builds are working out of the box just fine
+ * However, LD_LIBRARY_PATH has to be updated when -C prefer-dynamic is used
+
+ -- Sylvestre Ledru <sylvestre@debian.org>, Fri, 13 Feb 2015 15:08:43 +0100
--- /dev/null
+Document by Ximin Luo, Luca Bruno & Sylvestre Ledru
+
+This source package is unfortunately quite tricky and with several cutting
+edges, due to the complexity of rust-lang bootstrapping system and the high
+rate of language changes still ongoing.
+
+We try to describe here inner packaging details and the reasons behind them.
+
+If you are looking to help maintain this package, be sure to read the "Notes
+for package maintainers" section further below.
+
+
+Embedded libraries
+==================
+
+The upstream source package embeds many external libraries. We make a great
+effort to remove them and use system versions where possible, but there are a
+few more remaining:
+
+ * vendor/backtrace-sys, vendor/dlmalloc, vendor/walkdir
+
+ These are small C libraries designed to be statically linked; their upstream
+ does not support building them as a shared library and they are too small to
+ justify their own Debian package.
+
+
+Building from source
+====================
+
+The Debian rustc package will use the system rustc to bootstrap itself from.
+The system rustc has to be either the previous or the same version as the rustc
+being built; the build will fail if this is not the case.
+
+ sudo apt-get build-dep ./
+ dpkg-buildpackage
+ # Or, to directly use what's in the Debian FTP archive
+ sudo apt-get build-dep rustc
+ apt-get source --compile rustc
+
+Alternatively, you may give the "pkg.rustc.dlstage0" DEB_BUILD_PROFILE to
+instead use the process defined by Rust upstream. This downloads the "official"
+stage0 compiler for the version being built from rust-lang.org. At the time of
+writing "official" means "the previous stable version".
+
+ sudo apt-get build-dep -P pkg.rustc.dlstage0 ./
+ dpkg-buildpackage
+ # Or, to directly use what's in the Debian FTP archive
+ sudo apt-get build-dep -P pkg.rustc.dlstage0 rustc
+ apt-get source --compile -P pkg.rustc.dlstage0 rustc
+
+After [1] is fixed, both of these should in theory give identical results.
+
+If neither of these options are acceptable to you, e.g. because your distro
+does not have rustc already and your build process cannot access the network,
+see "Bootstrapping" below.
+
+[1] https://github.com/rust-lang/rust/issues/34902
+
+
+Bootstrapping
+=============
+
+To bootstrap rustc on a distro that does not have it or cargo available on any
+architecture (so cross-compiling is not an option) you can run `debian/rules
+source_orig-stage0`. This creates a .dsc that does not Build-Depend on rustc or
+cargo. Instead, it includes an extra orig-stage0 source tarball that contains
+the official stage0 compiler, pre-downloaded from rust-lang.org so that your
+build daemons don't need to access the network during the build.
+
+ debian/rules source_orig-stage0
+ # Follow the final manual instructions that it outputs. Then:
+ sbuild ../rustc_*.dsc && dput ../rustc_*.dsc
+
+To only bootstrap specific architectures, run this instead:
+
+ upstream_bootstrap_arch="arm64 armhf" debian/rules source_orig-stage0
+
+This way, other architectures will be omitted from the orig-stage0 tarball. You
+might want to do this e.g. if these other architectures are already present in
+your distro, but the $upstream_bootstrap_arch ones are not yet present.
+
+Notes
+-----
+
+The approach bundles the upstream bootstrapping binaries inside the Debian
+source package. This is a nasty hack that stretches the definition of "source
+package", but has a few advantages explained below.
+
+The traditional Debian way of bootstrapping compilers - and other distros have
+similar approaches - is some variant of the following:
+
+1. A developer locally installs some upstream bootstrapping binaries.
+2. They locally build a Debian package, using these binaries as undeclared
+ build dependencies.
+3. They upload these binary packages to Debian, which can be used as declared
+ Build-Depends in the future, including by the same package.
+
+The problem with this is, Debian does not have any policy nor infrastructure
+that can try to reproduce what this developer supposedly did.
+
+Using bootstrapping binary blobs *at some point of the process* is unavoidable.
+Rather than pretending we didn't do this, it is better to record *which blobs*
+we used, so it can be audited later. If we bundle non-Debian build-dependencies
+inside the source package, then we can do a *source-only upload*, and the
+building of the binary packages can be done by the normal build infrastructure.
+
+If the build process is reproducible [1] then we can be sure that *you* (as the
+developer that prepared the source-only upload) didn't backdoor the binaries,
+nor did the build daemons even if they were compromised during the build.
+
+The bootstrapping binaries may still have been backdoored, but this is true in
+both scenarios. So our arrangement is still a strict improvement in security,
+because it reduces the set of "things that may have been backdoored". Also,
+more people use the upstream binaries than the "magical original Debian
+package", so backdoors have a greater chance of being detected in the former.
+
+In the long run, this process is laying the foundations for doing Diverse
+Double-Compilation [2], where we use *many independent* bootstrapping binaries
+to reproduce bit-for-bit identical output compilers, giving confidence that
+nothing was backdoored along the way.
+
+[1] The build process for rustc is currently *not* reproducible but we're
+ working towards it. https://github.com/rust-lang/rust/issues/34902
+[2] http://www.dwheeler.com/trusting-trust/
+
+
+Maintaining this package
+========================
+
+Import of a new upstream version
+--------------------------------
+
+$ apt install equivs python3-magic
+$ sudo mk-build-deps -irt 'aptitude -R'
+$ uscan --verbose # or debian/rules source_orig-beta, for beta
+$ ver=UPDATE-ME # whatever it is, probably X.YY.Z or X.YY.Z~beta.N
+
+$ tar xf ../rustc-${ver/\~/-}-src.tar.xz && ( cd rustc-${ver/*~*/beta}-src/ && pwd && ../debian/prune-unused-deps ) && rm -rf rustc-${ver/*~*/beta}-src/
+# ^ If this fails, you probably need to refresh the patches used by debian/prune-unused-deps
+$ git diff
+# Review the diff. If it removes too much stuff, it could mean that rustc
+# pulled in new unnecessary dependencies in this newer version. See if you can
+# drop them by amending the patch "d-0000-ignore-removed-submodules.patch".
+# Rerun the above "tar ..." commands again and check that your patch works.
+# For example, there is absolutely no reason why rustc should need openssl.
+
+$ git commit -m "Update Files-Excluded for new upstream version ${ver/\~/-}" debian/copyright
+$ uscan --verbose # yes, again, to pick up the new Files-Excluded stuff
+ # or debian/rules source_orig-beta, for beta
+
+# Keep running this and follow its instructions, until it gives no output:
+$ debian/check-orig-suspicious.sh $ver
+# When you are satisfied with the above, proceed:
+
+$ git checkout debian/experimental
+$ gbp import-orig ../rustc_$ver+dfsg1.orig.tar.xz
+$ dch -v $ver+dfsg1-1~exp1 "New upstream release."
+$ debian/rules update-version
+# might also need to bump the version of the cargo Build-Depends
+# then refresh patches, etc etc
+# Use /usr/share/cargo/scripts/guess-crate-copyright to help update d/copyright quickly
+
+# If you need to repack again, bump the 'repacksuffix' in d/watch then run
+$ uscan --verbose --force-download
+# This will do a local repack using the new Files-Excluded rules, without
+# redownloading the orig tarball (despite the slightly misleading flag).
+
+
+Proceeding after build failure
+------------------------------
+
+If your build fails, don't run `./x.py` directly as that will detect it's being
+run with different settings, and run the build from scratch all over again.
+overwriting all intermediate files. Instead, do:
+
+$ debian/rules run_rustbuild X_CMD="build|test|install" X_FLAGS="whatever"
+
+Hopefully, this will directly proceed to the step that failed, without
+rebuilding everything in between.
+
+
+Comparing Debian rustc vs upstream rustc
+----------------------------------------
+
+This package does things the Debian way, which differs significantly from
+upstream practices. If you find a bug, you might want to check if it is present
+in the upstream package. Run "debian/rules debian/config.toml" to generate our
+config.toml that you can then use in an upstream directory **unpacked from the
+release tarball*. (It is more complex to get this working with their git repo.)
+
+This will configure it in a "halfway" style between upstream and Debian.
+Specifically, it will not build LLVM nor download stuff from crates.io, yet
+Debian patches are *not* applied. These specific settings were chosen as a
+tradeoff between convenience vs being close to what upstream does - so that the
+chances of a bug here being a genuine upstream issue rather than a Debian bug,
+is much higher. Also, with the exception of LLVM, these are non-default modes
+*supported by* upstream so they would be happy to receive bug reports about it
+even if your issue only occurs here.
+
+OTOH if you need to test a completely clean upstream build, including all the
+annoying stuff like building LLVM and downloading dependencies from crates.io,
+simply unpack the tarball and run `./configure && ./x.py build` etc as normal.
+This can be useful for confirming that an issue is caused by Debian's LLVM.
+
+If you need to test a LLVM patch, do something like this:
+
+# build your patched LLVM debs, then:
+$ mkdir -p llvm-destdir && cd llvm-destdir
+$ ver=4.0; VERSION=FIXME
+$ for i in llvm-$ver llvm-$ver-dev llvm-$ver-runtime llvm-$ver-tools libllvm$ver; do \
+ dpkg -x ../"$i"_*${VERSION}_*.deb .; done
+$ cd ../rustc
+$ debian/rules LLVM_DESTDIR=$PWD/../llvm-destdir build
+
+If you need to test a patch to the stage0 rustc, do something like this:
+
+# build your patched rustc debs or upstream rustc, then:
+$ mkdir -p rust-destdir && cd rust-destdir
+$ ver=1.20; VERSION=FIXME;
+$ for i in rustc libstd-rust-$ver libstd-rust-dev; do \
+ dpkg -x ../"$i"_*${VERSION}_*.deb .; done
+$ cd ../rustc
+$ debian/rules RUST_DESTDIR=$PWD/../rust-destdir build
+
+
+Useful links
+------------
+
+The Fedora rust team is more active than the Debian one. Here are their links:
+
+Source code
+https://src.fedoraproject.org/rpms/rust/tree/
+
+Binary packages and test logs
+https://kojipkgs.fedoraproject.org//packages/rust/
+If the same test fails both on Fedora and Debian it's a good indication that
+we're not Doing It Wrong and can file a valid bug upstream.
--- /dev/null
+Older backlog
+=============
+
+ * Use Compiler-rt package
+ * Improve the bootstrap (do the local build first on our systems, upload
+ to Debian and use the packages)
+ * Port on other archs
+ * Create a runtime package (rust-runtime)
+ * Move the runtime library into a public directory
+ * Package the various editors plugins (emacs, kate & vim)
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 20 Jan 2015 08:50:28 +0100
--- /dev/null
+# Used for testing architecture.mk, and for make_orig-stage0_tarball.sh.
+# Not for end users.
+#
+# Usage:
+# $ make -s --no-print-directory -f debian/architecture-test.mk rust-for-deb_arm64
+# arm64 aarch64-unknown-linux-gnu
+
+include debian/architecture.mk
+
+deb_arch_setvars = $(foreach var,ARCH ARCH_OS ARCH_CPU ARCH_BITS ARCH_ENDIAN GNU_CPU GNU_SYSTEM GNU_TYPE MULTIARCH,\
+ $(eval DEB_$(1)_$(var) = $(shell dpkg-architecture -a$(1) -qDEB_HOST_$(var) 2>/dev/null)))
+
+rust-for-deb_%:
+ $(eval $(call deb_arch_setvars,$*))
+ $(eval $(call rust_type_setvar,DEB_$*))
+ @echo $(DEB_$(*)_ARCH) $(DEB_$(*)_RUST_TYPE)
--- /dev/null
+# This Makefile snippet defines DEB_*_RUST_TYPE triples based on DEB_*_GNU_TYPE
+
+include /usr/share/dpkg/architecture.mk
+
+rust_cpu = $(subst i586,i686,\
+$(if $(findstring -riscv64-,-$(2)-),$(subst riscv64,riscv64gc,$(1)),\
+$(if $(findstring -armhf-,-$(2)-),$(subst arm,armv7,$(1)),\
+$(if $(findstring -armel-,-$(2)-),$(subst arm,armv5te,$(1)),\
+$(1)))))
+rust_type_setvar = $(1)_RUST_TYPE ?= $(call rust_cpu,$($(1)_GNU_CPU),$($(1)_ARCH))-unknown-$($(1)_GNU_SYSTEM)
+
+$(foreach machine,BUILD HOST TARGET,\
+ $(eval $(call rust_type_setvar,DEB_$(machine))))
+
+# fallback for older dpkg versions
+ifeq ($(DEB_TARGET_RUST_TYPE),-unknown-)
+ DEB_TARGET_RUST_TYPE = $(DEB_HOST_RUST_TYPE)
+endif
--- /dev/null
+#!/bin/bash
+# Wrapper around lld that strips away -Wl, which it doesn't recognise.
+# We need this for the wasm32 tests, where we have generic RUSTFLAGS that
+# includes LDFLAGS from dpkg-buildflags which assumes a GCC linker.
+#
+# However the tests fail for other reasons, namely we can't build rustdoc
+# (which runs the tests) in wasm32 yet. So this is just WIP at the moment,
+# it is not expect to work nor to be installed on user machines.
+exec /usr/bin/lld-9 "${@/#-Wl,/}"
--- /dev/null
+rustc (1.43.0+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable.
+ * Bump LLVM B-D version for some backported fixes affecting rustc.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 05 Jul 2020 15:06:52 +0100
+
+rustc (1.43.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * Drop sparc64 workaround. (Closes: #956413)
+ * Drop stack-gap workaround for old kernels and rust versions.
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 27 Apr 2020 13:09:20 +0100
+
+rustc (1.42.0+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 10 Apr 2020 11:33:25 +0100
+
+rustc (1.42.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ [ Fabian Grünbichler ]
+ * Team upload.
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 04 Apr 2020 16:06:03 +0100
+
+rustc (1.41.1+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 03 Apr 2020 23:41:11 +0100
+
+rustc (1.41.1+dfsg1-1~exp1) experimental; urgency=medium
+
+ [ Ximin Luo ]
+ * More python 2 -> 3 fixes.
+ * Enable the wasm32-wasi target for code that needs a "real" libstd.
+ * Don't strip static rlibs. This sometimes breaks wasm, and more generally
+ the stripped debuginfo is actually totally lost rather than being moved
+ into the -dbgsym packages. Shared libraries are unaffected and work.
+ * Allow 180 failing tests on riscv64, none were actually run last time.
+
+ [ Fabian Grünbichler ]
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 09 Mar 2020 00:31:34 +0000
+
+rustc (1.40.0+dfsg1-5) unstable; urgency=medium
+
+ * More python 2 -> 3 fixes.
+ * Allow 24 failing tests on riscv64.
+ * Reenable debuginfo for rustc, not just libstd.
+ * Reenable backtraces during tests.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 05 Jan 2020 13:35:46 +0000
+
+rustc (1.40.0+dfsg1-4) unstable; urgency=medium
+
+ * Experimental riscv64 support.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 04 Jan 2020 05:40:11 +0000
+
+rustc (1.40.0+dfsg1-3) unstable; urgency=medium
+
+ * Work around upstream #59264 again. :/
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 03 Jan 2020 22:05:16 +0000
+
+rustc (1.40.0+dfsg1-2) unstable; urgency=medium
+
+ * Fix more internal build scripts so they use python3.
+ * Don't add -L/usr/lib/llvm when cross-compiling. (Closes: #941783)
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 03 Jan 2020 20:18:46 +0000
+
+rustc (1.40.0+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable.
+ * Ignore new test failing on arm that also fails in previous versions.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 29 Dec 2019 22:17:04 +0000
+
+rustc (1.40.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 25 Dec 2019 00:09:24 +0000
+
+rustc (1.39.0+dfsg1-4) unstable; urgency=medium
+
+ * Update to LLVM 9. (Closes: #946886)
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 23 Dec 2019 03:21:02 +0000
+
+rustc (1.39.0+dfsg1-3) unstable; urgency=medium
+
+ * Fix mips patch involving mxgot for new RUSTFLAGS behaviour.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 06 Dec 2019 22:18:53 +0000
+
+rustc (1.39.0+dfsg1-2) unstable; urgency=medium
+
+ * Include reproducibility patch for compiler-builtins.
+ * Use python3 instead of python to run rustbuild. (Closes: #938422)
+ * Expand d-ignore-error-detail-diff.patch for unfixed upstream #53081.
+
+ -- Ximin Luo <infinity0@debian.org> Thu, 05 Dec 2019 22:51:41 +0000
+
+rustc (1.39.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 30 Nov 2019 22:20:48 +0000
+
+rustc (1.38.0+dfsg1-2) unstable; urgency=medium
+
+ * Fix building with rustc 1.38.0
+ * Fix building with cargo 0.40.0
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 29 Nov 2019 00:05:16 +0000
+
+rustc (1.38.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 26 Nov 2019 14:41:46 +0000
+
+rustc (1.37.0+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable.
+ * Fix a typo in debian/rules regex causing FTBFS on some arches.
+
+ -- Ximin Luo <infinity0@debian.org> Thu, 05 Sep 2019 00:06:23 -0700
+
+rustc (1.37.0+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Support cross-compiling to wasm32. (Closes: #903110)
+ To do that, install the libstd-rust-dev-wasm32-cross package and give
+ --target wasm32-unknown-unknown.
+ * Drop dependency on system compiler-rt, these new versions of rustc
+ actually don't need it at all.
+
+ -- Ximin Luo <infinity0@debian.org> Thu, 29 Aug 2019 09:00:03 -0700
+
+rustc (1.37.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+ * Use system compiler-rt.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 25 Aug 2019 03:06:33 -0700
+
+rustc (1.36.0+dfsg1-2) unstable; urgency=medium
+
+ * Set CARGO_HOME to debian/cargo_home (instead of $HOME/.cargo) as newer
+ versions of cargo must take a file lock that has to exist.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 17 Jul 2019 18:25:06 -0700
+
+rustc (1.36.0+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 16 Jul 2019 20:27:55 -0700
+
+rustc (1.36.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 13 Jul 2019 12:42:05 -0700
+
+rustc (1.35.0+dfsg1-1) unstable; urgency=medium
+
+ * Add entry in 1.34.2+dfsg1-1 to note that it uses LLVM 7.
+ * Add entry in 1.35.0+dfsg1-1~exp2 to note that it uses LLVM 8.
+ * Fix ICE on sparc64 by including upstream PR #61881.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 13 Jul 2019 10:30:35 -0700
+
+rustc (1.35.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * Don't use system compiler-rt, it's not ready yet.
+ * Update to LLVM 8.
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 09 Jun 2019 23:20:52 -0700
+
+rustc (1.34.2+dfsg1-1) unstable; urgency=medium
+
+ * Don't use system compiler-rt, there are issues with that for now.
+ * Use LLVM 7 for the Debian buster release.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 29 May 2019 21:52:37 -0700
+
+rustc (1.34.2+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Fix doc build, add version 1 compat mode hack for mdBook 2.
+ * Use system compiler-rt from libclang-common-*-dev.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 24 May 2019 00:39:59 -0700
+
+rustc (1.34.2+dfsg1-1~exp1) experimental; urgency=medium
+
+ * Ensure Cargo.toml is in rust-src.
+ * New upstream release.
+ * Update to LLVM 8.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 19 May 2019 02:40:02 -0700
+
+rustc (1.33.0+dfsg1-2) unstable; urgency=medium
+
+ * Add Fedora patches.
+ * Bump i386 allowed test failures to 12.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 18 May 2019 12:18:25 -0700
+
+rustc (1.33.0+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable.
+ * Fix build on mips, flags needed whitespace massaging.
+ * Drop obsolete patches.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 17 May 2019 21:04:20 -0700
+
+rustc (1.33.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+
+ [ Hiroaki Nakamura ]
+ * Delete obsolete patch.
+
+ [ Sylvestre Ledru ]
+ * Update compiler-rt patch.
+ * Improve build-related docs a bit.
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 29 Apr 2019 19:50:48 -0700
+
+rustc (1.32.0+dfsg1-3) unstable; urgency=medium
+
+ * Conditionally-apply u-compiletest.patch based on stage0 compiler.
+ * Fix syntax error in d/rules compiletest check.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 17 Mar 2019 16:40:05 -0700
+
+rustc (1.32.0+dfsg1-2) unstable; urgency=medium
+
+ * More verbose logging during builds.
+ * Fix compiletest compile error, and check log has at least 1 pass.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 17 Mar 2019 12:52:57 -0700
+
+rustc (1.32.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 27 Jan 2019 22:02:48 -0800
+
+rustc (1.32.0~beta.2+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Note that this upstream version already Closes: #917191.
+ * Backport other upstream fixes. (Closes: #916818, #917000, #917192).
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 01 Jan 2019 15:26:57 -0800
+
+rustc (1.32.0~beta.2+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+ * Drop obsolete d-sparc64-dont-pack-spans.patch
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 16 Dec 2018 13:48:25 -0800
+
+rustc (1.31.0+dfsg1-2) unstable; urgency=medium
+
+ * Bump mips mipsel s390x allowed-failures to 24.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 16 Dec 2018 14:34:44 -0800
+
+rustc (1.31.0+dfsg1-1) unstable; urgency=medium
+
+ * Revert debuginfo patches, they're not ready yet.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 16 Dec 2018 09:58:06 -0800
+
+rustc (1.31.0+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Drop redundant patches.
+ * Fix line numbers in some test-case patches.
+ * Backport an updated patch for gdb 8.2.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 15 Dec 2018 13:52:26 -0800
+
+rustc (1.31.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 14 Dec 2018 21:30:56 -0800
+
+rustc (1.31.0~beta.19+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Filter LLVM build flags to not be stupid.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 01 Dec 2018 12:17:52 -0800
+
+rustc (1.31.0~beta.19+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Thu, 29 Nov 2018 22:29:16 -0800
+
+rustc (1.31.0~beta.4+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Merge changes from Debian unstable.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 06 Nov 2018 19:45:26 -0800
+
+rustc (1.31.0~beta.4+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+ * Drop old maintainers from Uploaders.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 04 Nov 2018 19:00:16 -0800
+
+rustc (1.30.0+dfsg1-2) unstable; urgency=medium
+
+ * Increase FAILURES_ALLOWED for mips mipsel to 20.
+ * Set debuginfo-only-std = false for 32-bit powerpc architectures.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 02 Nov 2018 01:42:36 -0700
+
+rustc (1.30.0+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable. (Closes: #881845)
+ * Increase FAILURES_ALLOWED for mips architectures.
+ * Set debuginfo-only-std = false for mips architectures.
+
+ -- Ximin Luo <infinity0@debian.org> Thu, 01 Nov 2018 10:05:52 -0700
+
+rustc (1.30.0+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Disable debuginfo-gdb tests relating to enums. These will be fixed in an
+ upcoming version, see upstream #54614 for details.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 31 Oct 2018 00:02:25 -0700
+
+rustc (1.30.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * Actually don't build docs in an arch-only build.
+ * Add mips patch, hopefully closes #881845 but let's see.
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 30 Oct 2018 22:05:59 -0700
+
+rustc (1.30.0~beta.7+dfsg1-1~exp3) experimental; urgency=medium
+
+ * Do the necessary bookkeeping for the LLVM update.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 26 Sep 2018 23:29:18 -0700
+
+rustc (1.30.0~beta.7+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Tweak test failure rules: armel <= 8, ppc64 <= 12.
+ * Update to LLVM 7.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 26 Sep 2018 21:43:30 -0700
+
+rustc (1.30.0~beta.7+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 23 Sep 2018 10:40:30 -0700
+
+rustc (1.29.0+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable.
+ * Drop d-armel-disable-kernel-helpers.patch as a necessary part of the
+ fix to #906520, so it is actually fixed.
+ * Backport a patch to fix the rand crate on powerpc. (Closes: #909400)
+ * Lower the s390x allowed failures back to 25.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 23 Sep 2018 10:16:53 -0700
+
+rustc (1.29.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+ * Include patch for armel atomics. (Closes: #906520)
+ * Update to latest Standards-Version; no changes required.
+
+ -- Ximin Luo <infinity0@debian.org> Thu, 20 Sep 2018 22:33:20 -0700
+
+rustc (1.28.0+dfsg1-3) unstable; urgency=medium
+
+ * Team upload.
+
+ [ Ximin Luo ]
+ * More sparc64 fixes, and increase allowed-test-failures there to 180.
+
+ [ Julien Cristau ]
+ * Don't use pentium4 as i686 baseline (closes: #908561)
+
+ -- Julien Cristau <jcristau@debian.org> Tue, 11 Sep 2018 15:54:27 +0200
+
+rustc (1.28.0+dfsg1-2) unstable; urgency=medium
+
+ * Switch on verbose-tests to restore the old pre-1.28 behaviour, and restore
+ old failure-counting logic.
+ * Allow 50 test failures on s390x, restored failure-counting logic avoids
+ more double-counts.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 05 Aug 2018 02:18:10 -0700
+
+rustc (1.28.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+ * Add patches from Fedora to fix some test failures.
+ * Ignore a failure testing specific error output, under investigation.
+ * Allow 100 test failures on s390x, should be reducible later with LLVM 7.
+ * Temporary fix for mips64el bootstrap.
+ * Be even more verbose during the build.
+ * Update to latest Standards-Version.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 04 Aug 2018 23:04:41 -0700
+
+rustc (1.28.0~beta.14+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Update test-failure counting logic.
+ * Fix version constraints for Recommends: cargo.
+ * Add patch to fix sparc64 CABI.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 27 Jul 2018 04:26:52 -0700
+
+rustc (1.28.0~beta.14+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+ * Update to latest Standards-Version; no changes required.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 25 Jul 2018 03:11:11 -0700
+
+rustc (1.27.2+dfsg1-1) unstable; urgency=medium
+
+ [ Sylvestre Ledru ]
+ * Update of the alioth ML address.
+
+ [ Ximin Luo ]
+ * Fail the build if our version contains ~exp and we are not releasing to
+ experimental, this has happened by accident a few times already.
+ * Allow 36 and 44 test failures on armel and s390x respectively.
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 24 Jul 2018 21:35:56 -0700
+
+rustc (1.27.1+dfsg1-1~exp4) experimental; urgency=medium
+
+ * Unconditonally prune crate checksums to avoid having to manually prune them
+ whenever we patch the vendored crates.
+
+ -- Ximin Luo <infinity0@debian.org> Thu, 19 Jul 2018 14:49:18 -0700
+
+rustc (1.27.1+dfsg1-1~exp3) experimental; urgency=medium
+
+ * Add patch from Fedora to fix rebuild against same version.
+
+ -- Ximin Luo <infinity0@debian.org> Thu, 19 Jul 2018 08:52:03 -0700
+
+rustc (1.27.1+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Fix some failing tests.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 18 Jul 2018 09:06:44 -0700
+
+rustc (1.27.1+dfsg1-1~exp1) unstable; urgency=medium
+
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 13 Jul 2018 22:58:02 -0700
+
+rustc (1.26.2+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+ * Stop ignoring tests that now pass.
+ * Don't ignore tests that still fail, instead raise FAILURES_ALLOWED.
+ This allows us to see the test failures in the build logs, rather than
+ hiding them.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 16 Jun 2018 12:39:59 -0700
+
+rustc (1.26.1+dfsg1-3) unstable; urgency=medium
+
+ * Fix build-dep version range to build against myself.
+
+ -- Ximin Luo <infinity0@debian.org> Thu, 31 May 2018 09:25:17 -0700
+
+rustc (1.26.1+dfsg1-2) unstable; urgency=medium
+
+ * Also ignore test_loading_cosine on ppc64el.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 30 May 2018 20:58:46 -0700
+
+rustc (1.26.1+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 30 May 2018 08:18:04 -0700
+
+rustc (1.26.0+dfsg1-1~exp4) experimental; urgency=medium
+
+ * Try alternative patch to ignore x86 stdsimd tests suggested by upstream.
+ * Bump up allowed-test-failures to 8 to account for the fact that we're now
+ double-counting some failures.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 29 May 2018 20:36:56 -0700
+
+rustc (1.26.0+dfsg1-1~exp3) experimental; urgency=medium
+
+ * Ignore some irrelevant tests on ppc64 and non-x86 platforms.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 29 May 2018 09:32:38 -0700
+
+rustc (1.26.0+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Add Breaks+Replaces for older libstd-rust-dev with codegen-backends.
+ (Closes: #899180)
+ * Backport some test and packaging fixes from Ubuntu.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 22 May 2018 22:00:53 -0700
+
+rustc (1.26.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+ * Update to latest Standards-Version; no changes required.
+ * Update doc-base files. (Closes: #876831)
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 20 May 2018 03:11:45 -0700
+
+rustc (1.25.0+dfsg1-2) unstable; urgency=medium
+
+ * Add patches for LLVM's compiler-rt to fix bugs on sparc64 and mips64.
+ (Closes: #898982)
+ * Install codegen-backends into rustc rather than libstd-rust-dev.
+ (Closes: #899087)
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 19 May 2018 13:10:33 -0700
+
+rustc (1.25.0+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable.
+ * Allow up to 15 test failures on s390x.
+ * Set CARGO_INCREMENTAL=0 on sparc64.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 18 May 2018 01:11:15 -0700
+
+rustc (1.25.0+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Install missing codegen-backends.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 06 Apr 2018 14:05:36 -0700
+
+rustc (1.25.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+ * Update to LLVM 6.0.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 01 Apr 2018 15:59:47 +0200
+
+rustc (1.24.1+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable.
+ * Raise allowed-test-failures to 160 on some non-release arches: powerpc,
+ powerpcspe, sparc64, x32.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 07 Mar 2018 20:07:27 +0100
+
+rustc (1.24.1+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Steal some patches from Fedora to fix some test failures.
+ * Update debian/patches/u-make-tests-work-without-rpath.patch to try to fix
+ some more test failures.
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 05 Mar 2018 16:25:26 +0100
+
+rustc (1.24.1+dfsg1-1~exp1) experimental; urgency=medium
+
+ * More sparc64 CABI fixes. (Closes: #888757)
+ * New upstream release.
+ * Note that s390x baseline was updated in the meantime. (Closes: #851150)
+ * Include Debian-specific patch to disable kernel helpers on armel.
+ (Closes: #891902)
+ * Include missing build-dependencies for pkg.rustc.dlstage0 build profile.
+ (Closes: #891022)
+ * Add architecture.mk mapping for armel => armv5te-unknown-linux-gnueabi.
+ (Closes: #891913)
+ * Enable debuginfo-only-std on armel as well. (Closes: #891961)
+ * Backport upstream patch to support powerpcspe. (Closes: #891542)
+ * Disable full-bootstrap again to work around upstream #48319.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 03 Mar 2018 14:23:29 +0100
+
+rustc (1.23.0+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 19 Jan 2018 11:49:31 +0100
+
+rustc (1.23.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+ * Update to latest Standards-Version; no changes required.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 14 Jan 2018 00:08:17 +0100
+
+rustc (1.22.1+dfsg1-2) unstable; urgency=medium
+
+ * Fix B-D rustc version so this package can be built using itself.
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 01 Jan 2018 14:27:19 +0100
+
+rustc (1.22.1+dfsg1-1) unstable; urgency=medium
+
+ [ Ximin Luo ]
+ * Remove unimportant files that autoload remote resources from rust-src.
+ * Fix more symlinks in rust-doc.
+ * On armhf, only generate debuginfo for libstd and not the compiler itself.
+ This works around buildds running out of memory, see upstream #45854.
+ * Update to latest Standards-Version; no changes required.
+
+ [ Chris Coulson ]
+ * Fix some test failures that occur because we build rust without an rpath.
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 18 Dec 2017 19:46:25 +0100
+
+rustc (1.22.1+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release.
+ * Fix symlink target. (Closes: #877276)
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 25 Nov 2017 22:29:12 +0100
+
+rustc (1.21.0+dfsg1-3) unstable; urgency=medium
+
+ * Add/fix detection for sparc64, thanks to John Paul Adrian Glaubitz.
+ * Workaround FTBFS when building docs. (Closes: #880262)
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 06 Nov 2017 10:03:32 +0100
+
+rustc (1.21.0+dfsg1-2) unstable; urgency=medium
+
+ * Upload to unstable.
+ * Fix bootstrapping using 1.21.0, which is more strict about redundant &mut
+ previously used in u-output-failed-commands.patch.
+ * Only allow up to 5 test failures.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 25 Oct 2017 20:27:30 +0200
+
+rustc (1.21.0+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release.
+ * Fix the "install" target for cross-compilations; cross-compiling with
+ sbuild --host=$foreign-arch should work again.
+ * Update to latest Standards-Version; changes:
+ - Priority changed to optional from extra.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 17 Oct 2017 00:42:54 +0200
+
+rustc (1.20.0+dfsg1-3) unstable; urgency=medium
+
+ * Disable jemalloc to fix FTBFS with 1.21 on armhf.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 25 Oct 2017 12:01:19 +0200
+
+rustc (1.20.0+dfsg1-2) unstable; urgency=medium
+
+ * Update changelog entry for 1.20.0+dfsg1-1 to reflect that it was actually
+ and accidentally uploaded to unstable. No harm, no foul.
+ * We are no longer failing the build when tests fail, see NEWS or
+ README.Debian for details.
+ * Bump LLVM requirement to fix some failing tests.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 21 Oct 2017 14:20:17 +0200
+
+rustc (1.20.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 15 Oct 2017 23:30:35 +0200
+
+rustc (1.19.0+dfsg3-4) unstable; urgency=medium
+
+ * Bump LLVM requirement to pull in a fix for a FTBFS on ppc64el.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 15 Oct 2017 21:31:03 +0200
+
+rustc (1.19.0+dfsg3-3) unstable; urgency=medium
+
+ * Fix a trailing whitespace for tidy.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 19 Sep 2017 16:09:41 +0200
+
+rustc (1.19.0+dfsg3-2) unstable; urgency=medium
+
+ * Upload to unstable.
+ * Add a patch to print extra information when tests fail.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 19 Sep 2017 12:32:03 +0200
+
+rustc (1.19.0+dfsg3-1) experimental; urgency=medium
+
+ * New upstream release.
+ * Upgrade to LLVM 4.0. (Closes: #873421)
+ * rust-src: install Debian patches as well
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 15 Sep 2017 04:02:09 +0200
+
+rustc (1.18.0+dfsg1-4) unstable; urgency=medium
+
+ * Support gperf 3.1. (Closes: #869610)
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 25 Jul 2017 23:19:47 +0200
+
+rustc (1.18.0+dfsg1-3) unstable; urgency=medium
+
+ * Upload to unstable.
+ * Disable failing run-make test on armhf.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 22 Jul 2017 20:30:25 +0200
+
+rustc (1.18.0+dfsg1-2) experimental; urgency=medium
+
+ * Update to latest Standards-Version; no changes required.
+ * Change rustc to Multi-Arch: allowed and update Build-Depends with :native
+ annotations. Multi-Arch: foreign is typically for arch-indep packages that
+ might need to satisfy dependency chains of different architectures. Also
+ update instructions on cross-compiling to match this newer situation.
+ * Build debugging symbols for non-libstd parts of rustc.
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 17 Jul 2017 23:04:03 +0200
+
+rustc (1.18.0+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 27 Jun 2017 12:51:22 +0200
+
+rustc (1.17.0+dfsg2-8) unstable; urgency=medium
+
+ * Workaround for linux #865549, fix FTBFS on ppc64el.
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 17 Jul 2017 13:41:59 +0200
+
+rustc (1.17.0+dfsg2-7) unstable; urgency=medium
+
+ * Show exception traceback in bootstrap.py to examine ppc64el build failure.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 21 Jun 2017 10:46:27 +0200
+
+rustc (1.17.0+dfsg2-6) unstable; urgency=medium
+
+ * Upload to unstable.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 21 Jun 2017 00:24:22 +0200
+
+rustc (1.17.0+dfsg2-5) experimental; urgency=medium
+
+ * More work-arounds for armhf test failures.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 16 Jun 2017 13:27:45 +0200
+
+rustc (1.17.0+dfsg2-4) experimental; urgency=medium
+
+ * Fix arch-indep and arch-dep tests.
+ * Bump the LLVM requirement to fix FTBFS on armhf.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 14 Jun 2017 21:37:16 +0200
+
+rustc (1.17.0+dfsg2-3) experimental; urgency=medium
+
+ * Try to force the real gdb package. Some resolvers like aspcud will select
+ gdb-minimal under some circumstances, but this causes the debuginfo-gdb
+ tests to break.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 14 Jun 2017 00:48:37 +0200
+
+rustc (1.17.0+dfsg2-2) experimental; urgency=medium
+
+ * Support and document cross-compiling of rustc itself.
+ * Document cross-compiling other rust packages such as cargo.
+ * Work around upstream #39015 by disabling those tests rather than by
+ disabling optimisation, which causes FTBFS on 1.17.0 ppc64el. See
+ upstream #42476 and #42532 for details.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 13 Jun 2017 21:13:31 +0200
+
+rustc (1.17.0+dfsg2-1) experimental; urgency=medium
+
+ [ Sylvestre Ledru ]
+ * New upstream release
+
+ [ Ximin Luo ]
+ * Adapt packaging for rustbuild, the new upstream cargo-based build system.
+
+ [ Matthijs van Otterdijk ]
+ * Add a binary package, rust-src. (Closes: #846177)
+ * Link to local Debian web resources in the docs, instead of remote ones.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 16 May 2017 18:00:53 +0200
+
+rustc (1.16.0+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable so we have something to build 1.17 with.
+ * Update u-ignoretest-powerpc.patch for 1.16.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 19 Apr 2017 22:47:18 +0200
+
+rustc (1.16.0+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Don't ignore test failures on Debian unstable.
+ * Re-fix ignoring armhf test, accidentally reverted in previous version.
+ * Try to fix buildd failure by swapping B-D alternatives.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 16 Apr 2017 15:05:47 +0200
+
+rustc (1.16.0+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release
+ * u-ignoretest-jemalloc.patch removed (applied upstream)
+
+ [ Matthias Klose ]
+ * Bootstrap using the rustc version in the archive, on all architectures.
+ * Work around a GCC 4.8 ICE on AArch64.
+ * Use alternative build dependencies on cmake3 and binutils-2.26 for
+ builds on 14.04 LTS (trusty).
+ * debian/make_orig*dl_tarball.sh: Include all Ubuntu architectures.
+ * debian/rules: Ignore test results for now.
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 13 Apr 2017 15:24:03 +0200
+
+rustc (1.15.1+dfsg1-1) unstable; urgency=medium
+
+ * Upload to unstable so we have something to build 1.16 with.
+ * Try to fix ignoring atomic-lock-free tests on armhf.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 22 Mar 2017 00:13:27 +0100
+
+rustc (1.15.1+dfsg1-1~exp3) experimental; urgency=medium
+
+ * Ignore atomic-lock-free tests on armhf.
+ * Update ignoretest-armhf_03.patch for newer 1.15.1 behaviour.
+ * Tidy up some other patches to do with ignoring tests.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 12 Mar 2017 04:15:33 +0100
+
+rustc (1.15.1+dfsg1-1~exp2) experimental; urgency=medium
+
+ * Update armhf ignoretest patch.
+ * Bootstrap armhf. (Closes: #809316, #834003)
+ * Bootstrap ppc4el. (Closes: #839643)
+ * Fix rust-lldb symlink. (Closes: #850639)
+
+ -- Ximin Luo <infinity0@debian.org> Thu, 02 Mar 2017 23:01:26 +0100
+
+rustc (1.15.1+dfsg1-1~exp1) experimental; urgency=medium
+
+ * New upstream release (won't probably be in stretch).
+ see the 1.4 git branch for the follow up for stable
+ * Call to the test renamed from check-notidy => check
+ * d/p/u-destdir-support.diff: Apply upstream patch to support
+ destdir in the make install (for rustbuild, in later versions)
+ * Overrides the 'binary-or-shlib-defines-rpath' lintian warnings.
+ We need them for now
+ * Refresh of the patches
+
+ [ Sven Joachim ]
+ * Drop Pre-Depends on multiarch-support. (Closes: #856109)
+
+ [ Erwan Prioul ]
+ * Fix test and build failures for ppc64el. (Closes: #839643)
+
+ [ Ximin Luo ]
+ * Disable rustbuild for the time being (as it was in 1.14) and instead
+ bootstrap two new arches, armhf and ppc64el.
+ * Switch back to debhelper 9 to make backporting easier.
+ * Switch Build-Depends on binutils-multiarch back to binutils, the former is
+ no longer needed by the upstream tests.
+
+ [ Matthias Klose ]
+ * Compatibility fixes and improvements to help work better on Ubuntu.
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 26 Feb 2017 21:12:27 +0100
+
+rustc (1.14.0+dfsg1-3) unstable; urgency=medium
+
+ * Fix mips64 Makefile patches.
+ * Don't run arch-dep tests in a arch-indep build.
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 04 Jan 2017 21:34:56 +0100
+
+rustc (1.14.0+dfsg1-2) unstable; urgency=medium
+
+ * Update README.Debian, the old one was way out of date.
+ * Detect mips CPUs in ./configure and fill in mips Makefile rules.
+ * Work around jemalloc-related problems in the upstream bootstrapping
+ binaries for arm64, ppc64el, s390x.
+ * Disable jemalloc on s390x - upstream already disable it for some other
+ arches.
+ * Disable jemalloc tests for arches where jemalloc is disabled.
+ * We still expect the following failures:
+ * arm64 should be fixed (i.e. no failures) compared to the previous upload.
+ * armhf will FTBFS due to 'Illegal instruction' and this can only be fixed
+ with the next stable rustc release.
+ * mips mipsel mips64el ppc64 ppc64el s390x will FTBFS due to yet other
+ test failures beyond the ones I fixed above; this upload is only to save
+ me manual work in producing nice reports that exhibit these failures.
+
+ -- Ximin Luo <infinity0@debian.org> Thu, 29 Dec 2016 23:00:47 +0100
+
+rustc (1.14.0+dfsg1-1) unstable; urgency=medium
+
+ [ Sylvestre Ledru ]
+ * New upstream release
+ * Update debian/watch
+
+ [ Ximin Luo ]
+ * Try to bootstrap armhf ppc64 ppc64el s390x mips mipsel mips64el.
+ (Closes: #809316, #834003, #839643)
+ * Make rust-gdb and rust-lldb arch:all packages.
+ * Switch to debhelper 10.
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 24 Dec 2016 18:03:03 +0100
+
+rustc (1.13.0+dfsg1-2) unstable; urgency=high
+
+ * Skip macro-stepping test on arm64, until
+ https://github.com/rust-lang/rust/issues/37225 is resolved.
+
+ -- Luca Bruno <lucab@debian.org> Sat, 26 Nov 2016 23:40:14 +0000
+
+rustc (1.13.0+dfsg1-1) unstable; urgency=medium
+
+ [ Sylvestre Ledru ]
+ * New upstream release.
+
+ [ Ximin Luo ]
+ * Use Debian system jquery instead of upstream's embedded copy.
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 11 Nov 2016 13:35:23 +0100
+
+rustc (1.12.1+dfsg1-1) unstable; urgency=medium
+
+ [ Sylvestre Ledru ]
+ * New (minor) upstream release
+ * Missing dependency from rust-lldb to python-lldb-3.8 (Closes: #841833)
+ * Switch to llvm 3.9. (Closes: #841834)
+
+ [ Ximin Luo ]
+ * Dynamically apply rust-boot-1.12.1-from-1.12.0.diff.
+ This allows us to bootstrap from either 1.11.0 or 1.12.0.
+ * Bump LLVM Build-Depends version to get the backported patches for LLVM
+ #30402 and #29163.
+ * Install debugger_pretty_printers_common to rust-gdb and rust-lldb.
+ (Closes: #841835)
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 07 Nov 2016 14:15:14 +0100
+
+rustc (1.12.0+dfsg1-2) unstable; urgency=medium
+
+ * Ignore test run-make/no-duplicate-libs. Fails on i386
+ * Ignore test run-pass-valgrind/down-with-thread-dtors.rs . Fails on arm64
+ * I am not switching to llvm 3.9 now because a test freezes. The plan is
+ to silent the warning breaking the build and upload 1.12.1 after
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 05 Oct 2016 10:48:01 +0200
+
+rustc (1.12.0+dfsg1-1) unstable; urgency=medium
+
+ * new upstream release
+ - Rebase of the patches and removal of deprecated patches
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 29 Sep 2016 20:45:04 +0200
+
+rustc (1.11.0+dfsg1-3) unstable; urgency=medium
+
+ * Fix separate build-arch and build-indep builds.
+
+ -- Ximin Luo <infinity0@debian.org> Tue, 13 Sep 2016 12:30:41 +0200
+
+rustc (1.11.0+dfsg1-2) unstable; urgency=medium
+
+ * Fix rebuilding against the current version, by backporting a patch I wrote
+ that was already applied upstream. Should fix the FTBFS that was observed
+ by tests.reproducible-builds.org.
+ * Ignore a failing stdcall test on arm64; should fix the FTBFS there.
+ * Backport a doctest fix I wrote, already applied upstream.
+
+ -- Ximin Luo <infinity0@debian.org> Mon, 12 Sep 2016 17:40:12 +0200
+
+rustc (1.11.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release
+ * Add versioned binutils dependency. (Closes: #819475, #823540)
+
+ -- Ximin Luo <infinity0@debian.org> Wed, 07 Sep 2016 10:31:57 +0200
+
+rustc (1.10.0+dfsg1-3) unstable; urgency=medium
+
+ * Rebuild with LLVM 3.8, same as what upstream are using
+ * Dynamically link against LLVM. (Closes: #832565)
+
+ -- Ximin Luo <infinity0@debian.org> Sat, 30 Jul 2016 22:36:41 +0200
+
+rustc (1.10.0+dfsg1-2) unstable; urgency=medium
+
+ * Tentatively support ARM architectures
+ * Include upstream arm64,armel,armhf stage0 compilers (i.e. 1.9.0 stable)
+ in a orig-dl tarball, like how we previously did for amd64,i386.
+
+ -- Ximin Luo <infinity0@debian.org> Fri, 22 Jul 2016 15:54:51 +0200
+
+rustc (1.10.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release
+ * Add myself to uploaders
+ * Update our build process to bootstrap from the previous Debian rustc stable
+ version by default. See README.Debian for other options.
+ * Update to latest Standards-Version; no changes required.
+
+ -- Ximin Luo <infinity0@debian.org> Sun, 17 Jul 2016 03:40:49 +0200
+
+rustc (1.9.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release (Closes: #825752)
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 29 May 2016 17:57:38 +0200
+
+rustc (1.8.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release
+
+ [ Ximin Luo ]
+ * Fix using XZ for the orig tarball: needs explicit --repack in debian/watch
+ * Drop wno-error patch; applied upstream.
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 15 Apr 2016 12:01:45 +0200
+
+rustc (1.7.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 03 Mar 2016 22:41:24 +0100
+
+rustc (1.6.0+dfsg1-3) unstable; urgency=medium
+
+ * Apply upstream fix to silent a valgrind issue in the test suite
+ (Closes: ##812825)
+ * Add gcc & libc-dev as dependency of rustc to make sure it works
+ out of the box
+
+ [ Ximin Luo ]
+ * Work around rust bug https://github.com/rust-lang/rust/issues/31529
+ * Enable optional tests, and add verbosity/backtraces to tests
+ * Use XZ instead of GZ compression (will apply to the next new upload)
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 02 Feb 2016 15:08:11 +0100
+
+rustc (1.6.0+dfsg1-2) unstable; urgency=medium
+
+ * mk/rt.mk: Modify upstream code to append -Wno-error rather than trying
+ to remove the string "-Werror". (Closes: #812448)
+ * Disable new gcc-6 "-Wmisleading-indentation" warning, which triggers
+ (incorrectly) on src/rt/miniz.c. (Closes: #811573)
+ * Guard arch-dependent dh_install commands appropriately, fixing
+ arch-indep-only builds. (Closes: #809124)
+
+ -- Angus Lees <gus@debian.org> Tue, 26 Jan 2016 05:40:14 +1100
+
+rustc (1.6.0+dfsg1-1) unstable; urgency=medium
+
+ * new upstream release
+
+ [ Ximin Luo ]
+ * Use secure links for Vcs-* fields.
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 22 Jan 2016 10:56:08 +0100
+
+rustc (1.5.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release
+ - We believe that we should let rust transit to testing
+ (Closes: #786836)
+ * Move away from hash to the same rust naming schema
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 10 Dec 2015 17:23:32 +0100
+
+rustc (1.4.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release
+ 198068b3 => 1bf6e69c
+ * Update the download url in debian/watch
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 30 Oct 2015 09:36:02 +0100
+
+rustc (1.3.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release
+ 62abc69f => 198068b3
+ * jquery updated from 2.1.0 to 2.1.4
+
+ [ Ximin Luo ]
+ * Use LLVM 3.7 as upstream does, now that it's released. (Closes: #797626)
+ * Fix debian/copyright syntax mistakes.
+ * Don't Replace/Break previous versions of libstd-rust-*
+ * Check that the libstd-rust-* name in d/control matches upstream.
+ * Several other minor build tweaks.
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 19 Sep 2015 14:39:35 +0200
+
+rustc (1.2.0+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release
+ libstd-rust-7d23ff90 => libstd-rust-62abc69f
+ * Add llvm-3.6-tools to the build dep as it is
+ now needed for tests
+ * Fix the Vcs-Browser value
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 08 Aug 2015 23:13:44 +0200
+
+rustc (1.1.0+dfsg1-3) unstable; urgency=medium
+
+ * rust-{gdb,lldb} now Replaces pre-split rustc package.
+ Closes: #793433.
+ * Several minor lintian cleanups.
+
+ -- Angus Lees <gus@debian.org> Fri, 24 Jul 2015 17:47:48 +1000
+
+rustc (1.1.0+dfsg1-2) unstable; urgency=medium
+
+ [ Angus Lees ]
+ * Replace remote Rust logo with local file in HTML docs.
+ * Symlink rust-{gdb,lldb}.1 to {gdb,lldb}.1 manpages.
+ Note that gdb.1 requires the gdb-doc package, and that lldb.1 doesn't
+ exist yet (see #792908).
+ * Restore "Architecture: amd64 i386" filter, mistakenly removed in
+ previous version. Unfortunately the toolchain bootstrap isn't ready
+ to support all Debian archs yet. Closes: #793147.
+
+ -- Angus Lees <gus@debian.org> Wed, 22 Jul 2015 09:51:08 +1000
+
+rustc (1.1.0+dfsg1-1) unstable; urgency=low
+
+ [ Angus Lees ]
+ * Set SONAME when building dylibs
+ * Split out libstd-rust, libstd-rust-dev, rust-gdb, rust-lldb from rustc
+ - libs are now installed into multiarch-friendly locations
+ - rpath is no longer required to use dylibs (but talk to Debian Rust
+ maintainers before building a package that depends on the dylibs)
+ * Install /usr/share/rustc/architecture.mk, which declares Rust arch
+ triples for Debian archs and is intended to help future Rust packaging
+ efforts. Warning: it may not be complete/accurate yet.
+ * New upstream release (1.1)
+
+ -- Angus Lees <gus@debian.org> Thu, 16 Jul 2015 14:23:47 +1000
+
+rustc (1.0.0+dfsg1-1) unstable; urgency=medium
+
+ [ Angus Lees ]
+ * New upstream release (1.0!)
+
+ [ Sylvestre Ledru ]
+ * Fix the watch file
+ * Update of the repack to remove llvm sources
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 16 May 2015 08:24:32 +1000
+
+rustc (1.0.0~beta.4-1~exp1) experimental; urgency=low
+
+ [ Angus Lees ]
+ * New upstream release (beta 3)
+ - Drop manpage patch - now included upstream
+ * Replace duplicated compile-time dylibs with symlinks to run-time libs
+ (reduces installed size by ~68MB)
+
+ [ Sylvestre Ledru ]
+ * New upstream release (beta 4)
+ * Replace two more occurrences of jquery by the package
+ * Repack upstream to remove an LLVM file with a non-DFSG license
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 06 May 2015 11:14:30 +0200
+
+rustc (1.0.0~alpha.2-1~exp1) experimental; urgency=low
+
+ [ Angus Lees ]
+ * Patch upstream manpages to address minor troff issues
+ * Make 'debian/rules clean' also clean LLVM source
+ * Rename primary 'rust' binary package to 'rustc'
+ * Fix potential FTBFS: rust-doc requires texlive-fonts-recommended (for
+ pzdr.tfm)
+ * Build against system LLVM
+
+ [ Sylvestre Ledru ]
+ * New testing release
+ * Renaming of the source package
+ * Set a minimal version for dpkg-dev and debhelper (for profiles)
+ * For now, disable build profiles as they are not supported in Debian
+ * Introduce some changes by Angus Lees
+ - Introduction of build stages
+ - Disable the parallel execution of tests
+ - Improving of the parallel syntax
+ - Use override_dh_auto_build-arch
+ - Use override_dh_auto_build-indep
+ - Better declarations of the doc
+ - Update of the description
+ - Watch file updated (with key check)
+
+ [ Luca Bruno ]
+ * rules: respect 'nocheck' DEB_BUILD_OPTIONS
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 07 Mar 2015 09:25:47 +0100
+
+rust (1.0.0~alpha-0~exp1) experimental; urgency=low
+
+ * Initial package (Closes: #689207)
+ Work done by Luca Bruno, Jordan Justen and Sylvestre Ledru
+
+ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 23 Jan 2015 15:47:37 +0100
--- /dev/null
+#!/bin/bash
+set -e
+
+ver="$1"
+test -n "$ver" || exit 2
+
+SUS_WHITELIST=$(find "${PWD}/debian" -name upstream-tarball-unsuspicious.txt -type f)
+
+rm -rf rustc-${ver/*~*/beta}-src/
+tar xf ../rustc_$ver+dfsg1.orig.tar.xz && cd rustc-${ver/*~*/beta}-src/
+
+/usr/share/cargo/scripts/audit-vendor-source \
+ "$SUS_WHITELIST" \
+ "Files-Excluded: in debian/copyright and run a repack."
+
+echo "Artifacts left in rustc-$ver-src, please remove them yourself."
--- /dev/null
+[build]
+submodules = false
+vendor = true
+locked-deps = false
+verbose = 2
+
+rustc = "RUST_DESTDIR/usr/bin/rustc"
+cargo = "RUST_DESTDIR/usr/bin/cargo"
+
+build = "DEB_BUILD_RUST_TYPE"
+host = ["DEB_HOST_RUST_TYPE"]
+target = ["DEB_TARGET_RUST_TYPE"]
+
+#full-bootstrap = true
+# originally needed to work around #45317 but no longer necessary
+# currently we have to omit it because it breaks #48319
+
+# this might get changed later by override_dh_auto_configure-indep
+# we do it this way to avoid spurious rebuilds
+docs = false
+
+[install]
+prefix = "/usr"
+
+[target.DEB_BUILD_RUST_TYPE]
+llvm-config = "LLVM_DESTDIR/usr/lib/llvm-LLVM_VERSION/bin/llvm-config"
+linker = "DEB_BUILD_GNU_TYPE-gcc"
+
+ifelse(DEB_BUILD_RUST_TYPE,DEB_HOST_RUST_TYPE,,
+[target.DEB_HOST_RUST_TYPE]
+llvm-config = "LLVM_DESTDIR/usr/lib/llvm-LLVM_VERSION/bin/llvm-config"
+linker = "DEB_HOST_GNU_TYPE-gcc"
+
+)dnl
+ifelse(DEB_BUILD_RUST_TYPE,DEB_TARGET_RUST_TYPE,,DEB_HOST_RUST_TYPE,DEB_TARGET_RUST_TYPE,,
+[target.DEB_TARGET_RUST_TYPE]
+llvm-config = "LLVM_DESTDIR/usr/lib/llvm-LLVM_VERSION/bin/llvm-config"
+linker = "DEB_TARGET_GNU_TYPE-gcc"
+
+)dnl
+[target.wasm32-wasi]
+wasi-root = "/usr"
+
+[llvm]
+link-shared = true
+
+[rust]
+jemalloc = false
+optimize = MAKE_OPTIMISATIONS
+dist-src = false
+
+channel = "RELEASE_CHANNEL"
+
+# parallel codegen interferes with reproducibility, see
+# https://github.com/rust-lang/rust/issues/34902#issuecomment-319463586
+#codegen-units = 0
+debuginfo-level = 2
+debuginfo-level-std = 2
+rpath = false
+
+verbose-tests = true
+backtrace-on-ice = true
--- /dev/null
+Source: rustc
+Section: devel
+Priority: optional
+Maintainer: Debian Rust Maintainers <pkg-rust-maintainers@alioth-lists.debian.net>
+Uploaders:
+ Ximin Luo <infinity0@debian.org>,
+ Sylvestre Ledru <sylvestre@debian.org>
+# :native annotations are to support cross-compiling, see README.Debian
+Build-Depends: debhelper (>= 9),
+ debhelper-compat (= 12),
+ dpkg-dev (>= 1.17.14),
+ python3:native,
+ cargo:native (>= 0.40.0) <!pkg.rustc.dlstage0>,
+ rustc:native (>= 1.42.0+dfsg) <!pkg.rustc.dlstage0>,
+ rustc:native (<= 1.43.0++) <!pkg.rustc.dlstage0>,
+ llvm-9-dev:native,
+ llvm-9-tools:native,
+ libllvm9 (>= 1:9.0.1-13),
+ cmake (>= 3.0) | cmake3,
+# needed by some vendor crates
+ pkg-config,
+# this is sometimes needed by rustc_llvm
+ zlib1g-dev:native,
+ zlib1g-dev,
+# used by rust-installer
+ liblzma-dev:native,
+# test dependencies:
+ binutils (>= 2.26) <!nocheck> | binutils-2.26 <!nocheck>,
+ git <!nocheck>,
+ procps <!nocheck>,
+# below are optional tools even for 'make check'
+ gdb (>= 7.12) <!nocheck>,
+# Extra build-deps needed for x.py to download stuff in pkg.rustc.dlstage0.
+ curl <pkg.rustc.dlstage0>,
+ ca-certificates <pkg.rustc.dlstage0>,
+Build-Depends-Indep:
+ wasi-libc (>= 0.0~git20200114.1fad338~~) <!nowasm>,
+ wasi-libc (<= 0.0~git20200114.1fad338++) <!nowasm>,
+Build-Conflicts: gdb-minimal <!nocheck>
+Standards-Version: 4.2.1
+Homepage: http://www.rust-lang.org/
+Vcs-Git: https://salsa.debian.org/rust-team/rust.git
+Vcs-Browser: https://salsa.debian.org/rust-team/rust
+
+Package: rustc
+Architecture: any
+Multi-Arch: allowed
+Pre-Depends: ${misc:Pre-Depends}
+Depends: ${shlibs:Depends}, ${misc:Depends}, libstd-rust-dev (= ${binary:Version}),
+ gcc, libc-dev, binutils (>= 2.26)
+Recommends: cargo (>= 0.44.0~~), cargo (<< 0.45.0~~), rust-gdb | rust-lldb
+Suggests: rust-doc, rust-src, lld-9
+Replaces: libstd-rust-dev (<< 1.25.0+dfsg1-2~~)
+Breaks: libstd-rust-dev (<< 1.25.0+dfsg1-2~~)
+Description: Rust systems programming language
+ Rust is a curly-brace, block-structured expression language. It
+ visually resembles the C language family, but differs significantly
+ in syntactic and semantic details. Its design is oriented toward
+ concerns of "programming in the large", that is, of creating and
+ maintaining boundaries - both abstract and operational - that
+ preserve large-system integrity, availability and concurrency.
+ .
+ It supports a mixture of imperative procedural, concurrent actor,
+ object-oriented and pure functional styles. Rust also supports
+ generic programming and meta-programming, in both static and dynamic
+ styles.
+
+Package: libstd-rust-1.43
+Section: libs
+Architecture: any
+Multi-Arch: same
+Pre-Depends: ${misc:Pre-Depends}
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Rust standard libraries
+ Rust is a curly-brace, block-structured expression language. It
+ visually resembles the C language family, but differs significantly
+ in syntactic and semantic details. Its design is oriented toward
+ concerns of "programming in the large", that is, of creating and
+ maintaining boundaries - both abstract and operational - that
+ preserve large-system integrity, availability and concurrency.
+ .
+ It supports a mixture of imperative procedural, concurrent actor,
+ object-oriented and pure functional styles. Rust also supports
+ generic programming and meta-programming, in both static and dynamic
+ styles.
+ .
+ This package contains the standard Rust libraries, built as dylibs.
+
+Package: libstd-rust-dev
+Section: libdevel
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends}, ${misc:Depends}, libstd-rust-1.43 (= ${binary:Version})
+Description: Rust standard libraries - development files
+ Rust is a curly-brace, block-structured expression language. It
+ visually resembles the C language family, but differs significantly
+ in syntactic and semantic details. Its design is oriented toward
+ concerns of "programming in the large", that is, of creating and
+ maintaining boundaries - both abstract and operational - that
+ preserve large-system integrity, availability and concurrency.
+ .
+ It supports a mixture of imperative procedural, concurrent actor,
+ object-oriented and pure functional styles. Rust also supports
+ generic programming and meta-programming, in both static and dynamic
+ styles.
+ .
+ This package contains development files necessary to use the standard
+ Rust libraries.
+
+Package: libstd-rust-dev-wasm32-cross
+Section: libdevel
+Architecture: all
+Depends: ${shlibs:Depends}, ${misc:Depends}, lld-9
+# Embeds wasi-libc so doesn't need to depend on it
+# None of its licenses require source redistrib, so no need for Built-Using
+Build-Profiles: <!nowasm>
+Description: Rust standard libraries - development files
+ Rust is a curly-brace, block-structured expression language. It
+ visually resembles the C language family, but differs significantly
+ in syntactic and semantic details. Its design is oriented toward
+ concerns of "programming in the large", that is, of creating and
+ maintaining boundaries - both abstract and operational - that
+ preserve large-system integrity, availability and concurrency.
+ .
+ It supports a mixture of imperative procedural, concurrent actor,
+ object-oriented and pure functional styles. Rust also supports
+ generic programming and meta-programming, in both static and dynamic
+ styles.
+ .
+ This package contains development files necessary to use the standard
+ Rust libraries, for cross-compiling to the wasm32-unknown-unknown target.
+
+Package: rust-gdb
+Architecture: all
+Depends: gdb, ${misc:Depends}
+Suggests: gdb-doc
+Replaces: rustc (<< 1.1.0+dfsg1-1)
+Description: Rust debugger (gdb)
+ Rust is a curly-brace, block-structured expression language. It
+ visually resembles the C language family, but differs significantly
+ in syntactic and semantic details. Its design is oriented toward
+ concerns of "programming in the large", that is, of creating and
+ maintaining boundaries - both abstract and operational - that
+ preserve large-system integrity, availability and concurrency.
+ .
+ It supports a mixture of imperative procedural, concurrent actor,
+ object-oriented and pure functional styles. Rust also supports
+ generic programming and meta-programming, in both static and dynamic
+ styles.
+ .
+ This package contains pretty printers and a wrapper script for
+ invoking gdb on rust binaries.
+
+Package: rust-lldb
+Architecture: all
+# When updating, also update rust-lldb.links
+Depends: lldb-9, ${misc:Depends}, python3-lldb-9
+Replaces: rustc (<< 1.1.0+dfsg1-1)
+Description: Rust debugger (lldb)
+ Rust is a curly-brace, block-structured expression language. It
+ visually resembles the C language family, but differs significantly
+ in syntactic and semantic details. Its design is oriented toward
+ concerns of "programming in the large", that is, of creating and
+ maintaining boundaries - both abstract and operational - that
+ preserve large-system integrity, availability and concurrency.
+ .
+ It supports a mixture of imperative procedural, concurrent actor,
+ object-oriented and pure functional styles. Rust also supports
+ generic programming and meta-programming, in both static and dynamic
+ styles.
+ .
+ This package contains pretty printers and a wrapper script for
+ invoking lldb on rust binaries.
+
+Package: rust-doc
+Section: doc
+Architecture: all
+Build-Profiles: <!nodoc>
+Depends: ${misc:Depends},
+ libjs-jquery, libjs-highlight.js, libjs-mathjax,
+ fonts-open-sans, fonts-font-awesome
+Recommends: cargo-doc
+Description: Rust systems programming language - Documentation
+ Rust is a curly-brace, block-structured expression language. It
+ visually resembles the C language family, but differs significantly
+ in syntactic and semantic details. Its design is oriented toward
+ concerns of "programming in the large", that is, of creating and
+ maintaining boundaries - both abstract and operational - that
+ preserve large-system integrity, availability and concurrency.
+ .
+ It supports a mixture of imperative procedural, concurrent actor,
+ object-oriented and pure functional styles. Rust also supports
+ generic programming and meta-programming, in both static and dynamic
+ styles.
+ .
+ This package contains the Rust tutorial, language reference and
+ standard library documentation.
+
+Package: rust-src
+Architecture: all
+Depends: ${misc:Depends}
+Description: Rust systems programming language - source code
+ Rust is a curly-brace, block-structured expression language. It
+ visually resembles the C language family, but differs significantly
+ in syntactic and semantic details. Its design is oriented toward
+ concerns of "programming in the large", that is, of creating and
+ maintaining boundaries - both abstract and operational - that
+ preserve large-system integrity, availability and concurrency.
+ .
+ It supports a mixture of imperative procedural, concurrent actor,
+ object-oriented and pure functional styles. Rust also supports
+ generic programming and meta-programming, in both static and dynamic
+ styles.
+ .
+ This package contains sources of the Rust compiler and standard
+ libraries, useful for IDEs and code analysis tools such as Racer.
--- /dev/null
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: rust
+Source: https://www.rust-lang.org
+Files-Excluded:
+ *.min.js
+ src/llvm-emscripten
+ src/llvm-project
+ vendor/jemalloc-sys
+ vendor/mdbook/src/theme/FontAwesome
+ vendor/mdbook/src/theme/highlight.js
+ vendor/mdbook/src/theme/highlight.css
+# Exclude submodules https://github.com/rust-lang/rust/tree/master/src/tools
+# We prefer to do them in different Debian packages so they can have their own
+# version numbers. If upstream merges them "properly" (i.e. unify the version
+# numbers) then we can merge the packages in Debian. Note that cargotest here
+# does actually belong to rustc, it is an integration test suite for rustc to
+# check that certain popular crates continue to compile. It is not the same as
+# cargo's own test suite (in its own package) also called cargotest.
+# NB: don't exclude rust-installer, it's needed for "install" functionality
+ src/tools/cargo
+ src/tools/clippy
+ src/tools/rls
+ src/tools/remote-test-client
+ src/tools/remote-test-server
+ src/tools/rustfmt
+ src/tools/miri
+# Embedded C libraries
+ vendor/libz-sys/src/zlib*
+ vendor/lzma-sys*/xz-*
+# Embedded binary blobs
+ vendor/winapi-*/*/*.a
+ vendor/mdbook/src/theme/playpen_editor
+# Embedded proprietary doc formats
+ src/doc/book/nostarch/docx
+# unused dependencies, generated by debian/prune-unused-deps
+# DO NOT EDIT below, AUTOGENERATED
+ vendor/adler32
+ vendor/arc-swap
+ vendor/argon2rs
+ vendor/base64
+ vendor/bitmaps
+ vendor/blake2-rfc
+ vendor/bytecount
+ vendor/bytes
+ vendor/bytesize
+ vendor/cargo_metadata-0.8.0
+ vendor/cargo_metadata
+ vendor/colored
+ vendor/commoncrypto
+ vendor/commoncrypto-sys
+ vendor/compiletest_rs
+ vendor/constant_time_eq
+ vendor/cookie
+ vendor/cookie_store
+ vendor/core-foundation-0.6.3
+ vendor/core-foundation
+ vendor/core-foundation-sys-0.6.2
+ vendor/core-foundation-sys
+ vendor/crypto-hash
+ vendor/curl
+ vendor/curl-sys
+ vendor/derive_more
+ vendor/derive-new
+ vendor/directories
+ vendor/dirs
+ vendor/dirs-sys
+ vendor/dtoa
+ vendor/dunce
+ vendor/encoding_rs
+ vendor/foreign-types
+ vendor/foreign-types-shared
+ vendor/fs2
+ vendor/fst
+ vendor/fuchsia-cprng
+ vendor/futures
+ vendor/futures-cpupool
+ vendor/fwdansi
+ vendor/git2
+ vendor/git2-curl
+ vendor/glob
+ vendor/h2
+ vendor/hex-0.3.2
+ vendor/hex
+ vendor/home
+ vendor/httparse
+ vendor/http-body
+ vendor/http
+ vendor/humantime
+ vendor/hyper
+ vendor/hyper-tls
+ vendor/idna-0.1.5
+ vendor/if_chain
+ vendor/im-rc
+ vendor/iovec
+ vendor/itertools-0.7.8
+ vendor/json
+ vendor/jsonrpc-client-transports
+ vendor/jsonrpc-core
+ vendor/jsonrpc-core-client
+ vendor/jsonrpc-derive
+ vendor/jsonrpc-ipc-server
+ vendor/jsonrpc-pubsub
+ vendor/jsonrpc-server-utils
+ vendor/kernel32-sys
+ vendor/lazycell
+ vendor/lazy_static-0.2.11
+ vendor/libgit2-sys
+ vendor/libnghttp2-sys
+ vendor/libssh2-sys
+ vendor/lsp-codec
+ vendor/lsp-types
+ vendor/mdbook-linkcheck
+ vendor/mime
+ vendor/mime_guess
+ vendor/miniz_oxide
+ vendor/mio
+ vendor/mio-named-pipes
+ vendor/mio-uds
+ vendor/miow-0.2.1
+ vendor/native-tls
+ vendor/net2
+ vendor/opener
+ vendor/openssl
+ vendor/openssl-probe
+ vendor/openssl-src
+ vendor/openssl-sys
+ vendor/ordslice
+ vendor/packed_simd
+ vendor/parity-tokio-ipc
+ vendor/parking_lot
+ vendor/parking_lot_core
+ vendor/percent-encoding-1.0.1
+ vendor/pretty_env_logger
+ vendor/proc-macro-crate
+ vendor/proc-macro-error
+ vendor/publicsuffix
+ vendor/quine-mc_cluskey
+ vendor/racer
+ vendor/rand_core-0.4.0
+ vendor/rand_os
+ vendor/rand_xoshiro
+ vendor/rdrand
+ vendor/redox_users
+ vendor/reqwest
+ vendor/rls-analysis
+ vendor/rls-vfs
+ vendor/rustc-ap-arena
+ vendor/rustc-ap-graphviz
+ vendor/rustc-ap-rustc_ast_pretty
+ vendor/rustc-ap-rustc_attr
+ vendor/rustc-ap-rustc_data_structures
+ vendor/rustc-ap-rustc_errors
+ vendor/rustc-ap-rustc_feature
+ vendor/rustc-ap-rustc_fs_util
+ vendor/rustc-ap-rustc_index
+ vendor/rustc-ap-rustc_lexer
+ vendor/rustc-ap-rustc_macros
+ vendor/rustc-ap-rustc_parse
+ vendor/rustc-ap-rustc_session
+ vendor/rustc-ap-rustc_span
+ vendor/rustc-ap-rustc_target
+ vendor/rustc-ap-serialize
+ vendor/rustc-ap-syntax
+ vendor/rustc_tools_util
+ vendor/rustfix-0.4.6
+ vendor/schannel
+ vendor/scoped_threadpool
+ vendor/security-framework
+ vendor/security-framework-sys
+ vendor/serde_ignored
+ vendor/serde_repr
+ vendor/serde_urlencoded
+ vendor/shell-escape
+ vendor/signal-hook
+ vendor/sized-chunks
+ vendor/slab
+ vendor/string
+ vendor/strip-ansi-escapes
+ vendor/structopt
+ vendor/structopt-derive
+ vendor/term
+ vendor/tester
+ vendor/tokio-buf
+ vendor/tokio
+ vendor/tokio-codec
+ vendor/tokio-current-thread
+ vendor/tokio-executor
+ vendor/tokio-fs
+ vendor/tokio-io
+ vendor/tokio-named-pipes
+ vendor/tokio-process
+ vendor/tokio-reactor
+ vendor/tokio-service
+ vendor/tokio-signal
+ vendor/tokio-sync
+ vendor/tokio-tcp
+ vendor/tokio-threadpool
+ vendor/tokio-timer
+ vendor/tokio-udp
+ vendor/tokio-uds
+ vendor/try_from
+ vendor/try-lock
+ vendor/unicode_categories
+ vendor/url-1.7.2
+ vendor/utf8parse
+ vendor/uuid
+ vendor/vergen
+ vendor/vte
+ vendor/want
+ vendor/winapi-0.2.8
+ vendor/winapi-build
+ vendor/winreg
+ vendor/ws2_32-sys
+# DO NOT EDIT above, AUTOGENERATED
+
+Files: C*.md
+ R*.md
+ Cargo.lock
+ Cargo.toml
+ COPYRIGHT
+ LICENSE*
+ configure
+ config.toml.example
+ git-commit-hash
+ src/README.md
+ src/bootstrap/*
+ src/build_helper/*
+ src/ci/*
+ src/doc/*
+ src/etc/*
+ src/lib*
+ src/rt*
+ src/rust*
+ src/stage0.txt
+ src/stdarch/*
+ src/tools/*
+ src/test/*
+ version
+ x.py
+Copyright: 2006-2009 Graydon Hoare
+ 2009-2012 Mozilla Foundation
+ 2012-2017 The Rust Project Developers (see AUTHORS.txt)
+License: MIT or Apache-2.0
+
+Files: vendor/compiler_builtins/*
+Copyright: 2016-2019 Jorge Aparicio <japaricious@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/rust-lang-nursery/compiler-builtins
+
+Files: src/librustdoc/html/static/FiraSans*
+Copyright: 2014, Mozilla Foundation, 2014, Telefonica S.A.
+License: SIL-OPEN-FONT
+
+Files: src/librustdoc/html/static/SourceCodePro*
+Copyright: 2010, 2012 Adobe Systems Incorporated
+License: SIL-OPEN-FONT
+
+Files: src/librustdoc/html/static/SourceSerifPro*
+Copyright: 2014 Adobe Systems Incorporated
+License: SIL-OPEN-FONT
+
+Files: src/librustdoc/html/static/main.js
+Copyright: 2014 The Rust Project Developers
+License: MIT or Apache-2.0
+
+Files: src/libstd/memchr.rs
+Copyright: 2015 Andrew Gallant, bluss and Nicolas Koch
+License: MIT or Apache-2.0
+
+Files: src/libstd/sync/mpsc/mpsc_queue.rs
+ src/libstd/sync/mpsc/spsc_queue.rs
+Copyright: 2010-2011 Dmitry Vyukov
+License: BSD-2-Clause
+
+Files:
+ vendor/bitflags/*
+ vendor/cc/*
+ vendor/cmake/*
+ vendor/env_logger/*
+ vendor/env_logger-0*/*
+ vendor/getopts/*
+ vendor/libc/*
+ vendor/log/*
+ vendor/regex/*
+ vendor/regex-syntax/*
+ vendor/rustc-hash/*
+ vendor/time/*
+Copyright: 2010-2018 The Rust Project Developers
+License: MIT or Apache-2.0
+Comment:
+ This is a collection of external crates embedded here to bootstrap cargo.
+ Most of them come from the original upstream Rust project, thus share the
+ same MIT/Apache-2.0 dual-license. See https://github.com/rust-lang.
+ Exceptions are noted below.
+
+Files: vendor/num-integer/*
+ vendor/num-traits/*
+Copyright: 2014-2018 The Rust Project Developers
+License: MIT or Apache-2.0
+Comment: see https://github.com/rust-num/num
+
+Files:
+ vendor/string_cache/*
+ vendor/string_cache_codegen/*
+ vendor/string_cache_shared/*
+ vendor/unicode-bidi/*
+Copyright: 2015-2017 Alex Crichton <alex@alexcrichton.com>
+ 2015-2017 Keegan McAllister <kmcallister@mozilla.com>
+ 2015-2017 Chris Morgan <me@chrismorgan.info>
+ 2014-2017 The html5ever Project Developers
+ 2014-2017 The Servo Project Developers
+ 2013-2017 Simon Sapin <simon.sapin@exyr.org>
+License: MIT or Apache-2.0
+Comment: see https://github.com/servo/
+
+Files:
+ vendor/getrandom/*
+ vendor/rand/*
+ vendor/rand-0*/*
+ vendor/rand_chacha/*
+ vendor/rand_chacha-0*/*
+ vendor/rand_core/*
+ vendor/rand_core-0*/*
+ vendor/rand_hc/*
+ vendor/rand_hc-0*/*
+ vendor/rand_isaac/*
+ vendor/rand_pcg/*
+ vendor/rand_xorshift/*
+ vendor/rand_xorshift-0*/*
+Copyright: 2010-2019 The Rand Project Developers
+ 2010-2019 The Rust Project Developers
+License: MIT or Apache-2.0
+Comment:
+ see https://github.com/rust-random/getrandom
+ see https://github.com/rust-random/rand
+ see https://github.com/rust-random/small-rngs
+
+Files:
+ vendor/backtrace/*
+ vendor/backtrace-sys/*
+ vendor/cfg-if/*
+ vendor/filetime/*
+ vendor/flate2/*
+ vendor/fnv/*
+ vendor/jobserver/*
+ vendor/libz-sys/*
+ vendor/lzma-sys/*
+ vendor/miow/*
+ vendor/pkg-config/*
+ vendor/proc-macro2/*
+ vendor/proc-macro2-0*/*
+ vendor/rustc-demangle/*
+ vendor/scoped-tls/*
+ vendor/socket2/*
+ vendor/tar/*
+ vendor/toml/*
+ vendor/xz2/*
+Copyright: 2014-2019 Alex Crichton <alex@alexcrichton.com>
+ 2015-2017 The Rust Project Developers
+License: MIT or Apache-2.0
+Comment: see https://github.com/alexcrichton/
+
+Files: vendor/dlmalloc/*
+Copyright: 2017-2019 Alex Crichton <alex@alexcrichton.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/alexcrichton/dlmalloc-rs
+
+Files: vendor/dlmalloc/src/dlmalloc.c
+Copyright: 2000-2012 Doug Lea <dl@cs.oswego.edu>
+License: CC0-1.0
+
+Files: vendor/backtrace-sys/src/libbacktrace/*
+Copyright: 2012-2016 Free Software Foundation, Inc.
+License: BSD-3-Clause
+Comment: written by Ian Lance Taylor, Google.
+
+Files:
+ vendor/backtrace-sys/src/libbacktrace/filenames.h
+ vendor/backtrace-sys/src/libbacktrace/ltmain.sh
+Copyright: 2000, 2001, 2007, 2010 Free Software Foundation, Inc.
+License: GPL-2+
+
+Files: vendor/ammonia/*
+Copyright: 2015-2018 Michael Howell <michael@notriddle.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/notriddle/ammonia
+
+Files: vendor/annotate-snippets/*
+Copyright: 2018-2019 Zibi Braniecki <gandalf@mozilla.com>
+License: Apache-2.0 or MIT
+Comment: see https://github.com/zbraniecki/annotate-snippets-rs
+
+Files: vendor/ansi_term/*
+Copyright: 2014-2016 ogham@bsago.me
+ 2014-2016 Ryan Scheel (Havvy) <ryan.havvy@gmail.com>
+License: MIT
+Comment: see https://github.com/ogham/rust-ansi-term
+
+Files: vendor/aho-corasick/*
+ vendor/memchr/*
+ vendor/utf8-ranges/*
+Copyright: 2015 Andrew Gallant <jamslam@gmail.com>
+ 2015-2018 bluss
+License: MIT or Unlicense
+Comment: see upstream projects,
+ * https://github.com/docopt/docopt.rs
+ * https://github.com/BurntSushi/aho-corasick
+ * https://github.com/BurntSushi/rust-memchr
+ * https://github.com/BurntSushi/utf8-ranges
+
+Files: vendor/arrayref/*
+Copyright: 2015-2018 David Roundy <roundyd@physics.oregonstate.edu>
+License: BSD-2-Clause
+Comment: see https://github.com/droundy/arrayref
+
+Files: vendor/autocfg/*
+Copyright: 2018-2019 Josh Stone <cuviper@gmail.com>
+License: Apache-2.0 or MIT
+
+Files: vendor/atty/*
+Copyright: 2015-2017 softprops <d.tangren@gmail.com>
+License: MIT
+Comment: see https://github.com/softprops/atty
+
+Files:
+ vendor/block-buffer/*
+ vendor/byte-tools/*
+ vendor/digest/*
+ vendor/fake-simd/*
+ vendor/sha-1/*
+Copyright: 2016-2019 RustCrypto Project Developers
+License: MIT or Apache-2.0
+Comment:
+ see https://github.com/RustCrypto/traits
+ see https://github.com/RustCrypto/utils
+
+Files:
+ vendor/byteorder/*
+ vendor/globset/*
+ vendor/ignore/*
+ vendor/same-file/*
+ vendor/termcolor/*
+ vendor/walkdir/*
+ vendor/winapi-util/*
+ vendor/wincolor/*
+Copyright: 2015-2018 Andrew Gallant <jamslam@gmail.com>
+License: Unlicense or MIT
+Comment:
+ see https://github.com/BurntSushi/byteorder
+ see https://github.com/BurntSushi/same-file
+ see https://github.com/BurntSushi/walkdir
+ see https://github.com/BurntSushi/winapi-util
+ see https://github.com/BurntSushi/ripgrep/tree/master/globset
+ see https://github.com/BurntSushi/ripgrep/tree/master/ignore
+ see https://github.com/BurntSushi/ripgrep/tree/master/termcolor
+ see https://github.com/BurntSushi/ripgrep/tree/master/wincolor
+
+Files: vendor/log_settings/*
+Copyright: 2016-2018 Oliver Schneider <git-spam-no-reply9815368754983@oli-obk.de>
+License: MIT
+Comment: see https://github.com/oli-obk/log_settings
+
+Files:
+ vendor/c2-chacha/*
+ vendor/ppv-lite86/*
+Copyright: 2019-2019 The CryptoCorrosion Contributors
+License: MIT or Apache-2.0
+Comment: see https://github.com/cryptocorrosion/cryptocorrosion
+
+Files:
+ vendor/chalk-engine/*
+ vendor/chalk-macros/*
+Copyright: 2015-2018 Rust Compiler Team
+ 2015-2018 Chalk developers
+License: Apache-2.0 or MIT
+Comment: see https://github.com/rust-lang-nursery/chalk
+
+Files: vendor/chrono/*
+Copyright: 2014-2018 Kang Seonghoon <public+rust@mearie.org>
+License: MIT or Apache-2.0
+Comment: see https://github.com/chronotope/chrono
+
+Files: vendor/clap/*
+Copyright: 2015-2017 Kevin K. <kbknapp@gmail.com>
+License: MIT
+Comment: see https://github.com/kbknapp/clap-rs.git
+
+Files: vendor/cloudabi/*
+Copyright: 2016-2018 Nuxi (https://nuxi.nl/) and contributors
+License: BSD-2-Clause
+Comment: see https://github.com/nuxinl/cloudabi
+
+Files: vendor/crc32fast/*
+Copyright: 2018-2019 Sam Rijs <srijs@airpost.net>
+ 2018-2019 Alex Crichton <alex@alexcrichton.com>
+License: MIT OR Apache-2.0
+Comment: see https://github.com/srijs/rust-crc32fast
+
+Files:
+ vendor/crossbeam-channel/*
+ vendor/crossbeam-deque/*
+ vendor/crossbeam-epoch/*
+ vendor/crossbeam-queue/*
+ vendor/crossbeam-utils/*
+ vendor/crossbeam-utils-0.6.5/*
+Copyright: 2015-2020 The Crossbeam Project Developers
+License: MIT or Apache-2.0
+Comment: see https://github.com/crossbeam-rs
+
+Files: vendor/codespan/*
+Copyright: 2018-2020 Brendan Zabarauskas <bjzaba@yahoo.com.au>
+License: Apache-2.0
+Comment: see https://github.com/brendanzab/codespan
+
+Files: vendor/codespan-reporting/*
+Copyright: 2018-2020 Brendan Zabarauskas <bjzaba@yahoo.com.au>
+License: Apache-2.0
+Comment: see https://github.com/brendanzab/codespan
+
+Files:
+ vendor/darling/*
+ vendor/darling_core/*
+ vendor/darling_macro/*
+Copyright: 2017-2019 Ted Driggs <ted.driggs@outlook.com>
+License: MIT
+
+Files: vendor/datafrog/*
+Copyright:
+ 2018 Frank McSherry <fmcsherry@me.com>
+ 2018 The Rust Project Developers
+ 2018 Datafrog Developers
+License: Apache-2.0 or MIT
+Comment: see https://github.com/rust-lang-nursery/datafrog
+
+Files: vendor/diff/*
+Copyright: 2015-2017 Utkarsh Kukreti <utkarshkukreti@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/utkarshkukreti/diff.rs
+
+Files:
+ vendor/anyhow/*
+ vendor/itoa/*
+ vendor/quote/*
+ vendor/quote-0*/*
+ vendor/syn/*
+ vendor/syn-0*/*
+Copyright: 2016-2020 David Tolnay <dtolnay@gmail.com>
+License: MIT or Apache-2.0
+Comment:
+ see https://github.com/dtolnay/anyhow
+ see https://github.com/dtolnay/itoa
+ see https://github.com/dtolnay/quote
+ see https://github.com/dtolnay/syn
+ see https://github.com/dtolnay/synom
+
+Files:
+ vendor/arrayvec/*
+ vendor/either/*
+ vendor/fixedbitset/*
+ vendor/itertools/*
+ vendor/itertools-0.7.8/*
+ vendor/maplit/*
+ vendor/nodrop/*
+ vendor/ordermap/*
+ vendor/scopeguard/*
+Copyright: 2014-2020 bluss
+License: MIT or Apache-2.0
+Comment:
+ see https://github.com/bluss/rust-itertools
+ see https://github.com/bluss/either
+ see https://github.com/bluss/arrayvec
+ see https://github.com/bluss/fixedbitset
+ see https://github.com/bluss/maplit
+ see https://github.com/bluss/ordermap
+ see https://github.com/bluss/scopeguard
+
+Files: vendor/difference/*
+Copyright: 2015-2018 Johann Hofmann <mail@johann-hofmann.com>
+License: MIT
+Comment: see https://github.com/johannhof/difference.rs
+
+Files: vendor/elasticlunr-rs/*
+Copyright: 2017-2018 Matt Ickstadt <mattico8@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/mattico/elasticlunr-rs
+
+Files: vendor/ena/*
+Copyright: 2015-2018 Niko Matsakis <niko@alum.mit.edu>
+License: MIT or Apache-2.0
+Comment: see https://github.com/nikomatsakis/ena
+
+Files:
+ vendor/error-chain/*
+Copyright: 2016-2017 Brian Anderson <banderson@mozilla.com>
+ 2016-2017 Paul Colomiets <paul@colomiets.name>
+ 2016-2017 Colin Kiegel <kiegel@gmx.de>
+ 2016-2017 Yamakaky <yamakaky@yamaworld.fr>
+License: MIT or Apache-2.0
+Comment: see https://github.com/brson/error-chain
+
+Files:
+ vendor/failure/*
+ vendor/failure_derive/*
+Copyright: 2017-2018 Without Boats <boats@mozilla.com>
+License: MIT OR Apache-2.0
+Comment:
+ see https://github.com/withoutboats/failure
+ see https://github.com/withoutboats/failure_derive
+
+Files: vendor/fortanix-sgx-abi/*
+Copyright: 2015-2019 Jethro Beekman <jethro@fortanix.com>
+License: MPL-2.0
+Comment: see https://github.com/fortanix/rust-sgx
+
+Files: vendor/fs_extra/*
+Copyright: 2017-2018 Denis Kurilenko <webdesus@gmail.com>
+License: MIT
+Comment: see https://github.com/webdesus/fs_extra
+
+Files:
+ vendor/fuchsia-zircon/*
+ vendor/fuchsia-zircon-sys/*
+Copyright: 2014-2018 Raph Levien <raph@google.com>
+License: BSD-3-Clause
+Comment: see https://fuchsia.googlesource.com/garnet/
+
+Files: vendor/futf/*
+Copyright: 2015-2018 Keegan McAllister <kmcallister@mozilla.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/servo/futf
+
+Files: vendor/generic-array/*
+Copyright: 2015-2019 Bartłomiej Kamiński <fizyk20@gmail.com>
+License: MIT
+Comment: see https://github.com/fizyk20/generic-array.git
+
+Files: vendor/handlebars/*
+Copyright: 2014-2017 Ning Sun <sunng@about.me>
+License: MIT
+Comment: see https://github.com/sunng87/handlebars-rust
+
+Files: vendor/heck/*
+Copyright: 2017-2018 Without Boats <woboats@gmail.com>
+License: MIT OR Apache-2.0
+Comment: see https://github.com/withoutboats/heck
+
+Files: vendor/hermit-abi/*
+Copyright: 2019-2019 Stefan Lankes
+License: MIT or Apache-2.0
+Comment: see https://github.com/hermitcore/hermit-abi
+
+Files:
+ vendor/html5ever/*
+ vendor/markup5ever/*
+Copyright: 2014-2018 The html5ever Project Developers
+License: MIT or Apache-2.0
+Comment: see https://github.com/servo/html5ever
+
+Files: vendor/humantime/*
+Copyright: 2016-2018 Paul Colomiets <paul@colomiets.name>
+License: MIT or Apache-2.0
+Comment: see https://github.com/tailhook/humantime
+
+Files: vendor/ident_case/*
+Copyright: 2017-2019 Ted Driggs <ted.driggs@outlook.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/TedDriggs/ident_case
+
+Files:
+ vendor/idna/*
+ vendor/idna-0.1.5/*
+ vendor/percent-encoding/*
+ vendor/percent-encoding-1*/*
+ vendor/url/*
+Copyright: 2013-2020 The rust-url developers
+License: MIT or Apache-2.0
+Comment: see https://github.com/servo/rust-url/
+
+Files: vendor/indexmap/*
+Copyright: 2016-2019 bluss
+ 2016-2019 Josh Stone <cuviper@gmail.com>
+License: Apache-2.0 or MIT
+Comment: see https://github.com/bluss/indexmap
+
+Files: vendor/is-match/*
+ vendor/toml-query/*
+Copyright: 2017-2018 Matthias Beyer <mail@beyermatthias.de>
+License: MPL-2.0
+Comment: see https://github.com/matthiasbeyer/is-match
+ see https://github.com/matthiasbeyer/toml-query
+
+Files: vendor/matches/*
+Copyright: 2014-2017 Simon Sapin <simon.sapin@exyr.org>
+License: MIT
+Comment: see https://github.com/SimonSapin
+
+Files:
+ vendor/lazy_static/*
+ vendor/lazy_static-0*/*
+Copyright: 2014-2018 Marvin Löbel <loebel.marvin@gmail.com>
+License: MIT or Apache-2.0
+Comment:
+ see https://github.com/rust-lang-nursery/lazy-static.rs
+ see https://github.com/Kimundi/owning-ref-rs
+
+Files: vendor/mdbook/*
+Copyright: 2015-2017 Mathieu David <mathieudavid@mathieudavid.org>
+License: MPL-2.0
+Comment: see https://github.com/azerupi/mdBook
+
+Files: vendor/measureme/*
+Copyright: 2019-2019 Wesley Wiser <wwiser@gmail.com>
+ 2019-2019 Michael Woerister <michaelwoerister@posteo>
+License: MIT OR Apache-2.0
+Comment: see https://github.com/rust-lang/measureme
+
+Files: vendor/memmap/*
+Copyright: 2015-2018 Dan Burkert <dan@danburkert.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/danburkert/memmap-rs
+
+Files:
+ vendor/memoffset/*
+ vendor/memoffset-0*/*
+Copyright: 2017-2019 Gilad Naaman <gilad.naaman@gmail.com>
+License: MIT
+Comment: see https://github.com/Gilnaa/memoffset
+
+Files:
+ vendor/macro-utils/*
+ vendor/minifier/*
+Copyright: 2017-2018 Guillaume Gomez <guillaume1.gomez@gmail.com>
+License: MIT
+Comment:
+ see https://github.com/GuillaumeGomez/macro_utils
+ see https://github.com/GuillaumeGomez/minifier-rs
+
+Files: vendor/new_debug_unreachable/*
+Copyright: 2014-2018 Matt Brubeck <mbrubeck@limpet.net>
+ 2014-2018 Jonathan Reem <jonathan.reem@gmail.com>
+License: MIT
+Comment: see https://github.com/mbrubeck/rust-debug-unreachable
+
+Files: vendor/num_cpus/*
+Copyright: 2015 Sean McArthur <sean.monstar@gmail.com>
+License: MIT
+Comment: see https://github.com/seanmonstar/num_cpus
+
+Files: vendor/open/*
+Copyright: 2015-2017 Sebastian Thiel <byronimo@gmail.com>
+License: MIT
+Comment: see https://github.com/Byron/open-rs
+
+Files: vendor/once_cell/*
+Copyright: 2018-2019 Aleksey Kladov <aleksey.kladov@gmail.com>
+License: MIT OR Apache-2.0
+Comment: see https://github.com/matklad/once_cell
+
+Files:
+ vendor/pest/*
+ vendor/pest_derive/*
+ vendor/pest_generator/*
+ vendor/pest_meta/*
+Copyright: 2016-2019 Dragoș Tiselice <dragostiselice@gmail.com>
+License: MIT or Apache-2.0
+Comment:
+ see https://github.com/dragostis/pest
+ see https://github.com/pest-parser/pest
+
+Files: vendor/polonius-engine/*
+Copyright: 2018-2018 The Rust Project Developers
+ 2018-2018 Polonius Developers
+License: Apache-2.0 or MIT
+Comment: see https://github.com/rust-lang-nursery/polonius
+
+Files:
+ vendor/pulldown-cmark/*
+ vendor/pulldown-cmark-0*/*
+Copyright: 2015-2017 Raph Levien <raph@google.com>
+License: MIT
+Comment: see https://github.com/google/pulldown-cmark
+
+Files: vendor/punycode/*
+Copyright: 2015-2019 mcarton <cartonmartin+git@gmail.com>
+License: MIT
+Comment: see https://github.com/mcarton/rust-punycode.git
+
+Files: vendor/quick-error/*
+Copyright: 2015-2017 Paul Colomiets <paul@colomiets.name>
+ 2015-2017 Colin Kiegel <kiegel@gmx.de>
+License: MIT or Apache-2.0
+Comment: see http://github.com/tailhook/quick-error
+
+Files:
+ vendor/rayon/*
+ vendor/rayon-core/*
+ vendor/rustc-rayon/*
+ vendor/rustc-rayon-core/*
+Copyright: 2014-2018 Niko Matsakis <niko@alum.mit.edu>
+ 2014-2018 Josh Stone <cuviper@gmail.com>
+License: Apache-2.0 or MIT
+Comment:
+ see https://github.com/rayon-rs/rayon
+ see https://github.com/Zoxc/rayon/tree/rustc
+
+Files: vendor/redox_syscall/*
+ vendor/redox_termios/*
+Copyright: 2016-2017 Jeremy Soller <jackpot51@gmail.com>
+License: MIT
+Comment: see https://github.com/redox-os/syscall
+ see https://github.com/redox-os/termios
+
+Files: vendor/remove_dir_all/*
+Copyright: 2017-2018 Aaronepower <theaaronepower@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/Aaronepower/remove_dir_all.git
+
+Files: vendor/rls-data/*
+ vendor/rls-span/*
+Copyright: 2016-2017 Nick Cameron <ncameron@mozilla.com>
+License: Apache-2.0 or MIT
+Comment: see https://github.com/nrc/rls-span
+ see https://github.com/nrc/rls-data
+
+Files: vendor/rustc_version/*
+Copyright: 2015-2018 Marvin Löbel <loebel.marvin@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/Kimundi/rustc-version-rs
+
+Files: vendor/rustfix/*
+Copyright: 2016-2018 Pascal Hertleif <killercup@gmail.com>
+ 2016-2018 Oliver Schneider <oli-obk@users.noreply.github.com>
+License: Apache-2.0 or MIT
+Comment: see https://github.com/killercup/rustfix
+
+Files: vendor/ryu/*
+Copyright: 2018-2018 David Tolnay <dtolnay@gmail.com>
+License: Apache-2.0 or BSL-1.0
+Comment: see https://github.com/dtolnay/ryu
+
+Files:
+ vendor/semver/*
+ vendor/semver-parser/*
+Copyright:
+ 2014-2018 Steve Klabnik <steve@steveklabnik.com>
+ 2014-2018 The Rust Project Developers
+License: MIT or Apache-2.0
+Comment: see https://github.com/steveklabnik/semver
+
+Files: vendor/serde/*
+ vendor/serde_json/*
+Copyright: 2014-2017 Erick Tryzelaar <erick.tryzelaar@gmail.com>
+License: MIT or Apache-2.0
+Comment:
+ see https://github.com/serde-rs/serde
+ see https://github.com/serde-rs/json
+
+Files: vendor/serde_derive/*
+Copyright: 2014-2017 Erick Tryzelaar <erick.tryzelaar@gmail.com>
+ 2016-2017 David Tolnay <dtolnay@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/serde-rs/serde
+
+Files: vendor/siphasher/*
+Copyright: 2016-2018 Frank Denis <github@pureftpd.org>
+License: MIT or Apache-2.0
+Comment: see https://github.com/jedisct1/rust-siphash
+
+Files: vendor/shlex/*
+Copyright: 2015-2015 comex <comexk@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/comex/rust-shlex
+
+Files:
+ vendor/smallvec-0.6.10/*
+ vendor/smallvec/*
+Copyright: 2015-2020 Simon Sapin <simon.sapin@exyr.org>
+License: MPL-2.0
+Comment: see https://github.com/servo/rust-smallvec
+
+Files: vendor/stable_deref_trait/*
+Copyright: 2017-2017 Robert Grosse <n210241048576@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/storyyeller/stable_deref_trait
+
+Files: vendor/strsim/*
+Copyright: 2015 Danny Guo <dannyguo91@gmail.com>
+License: MIT
+Comment: see https://github.com/dguo/strsim-rs
+
+Files:
+ vendor/strum/*
+ vendor/strum_macros/*
+Copyright: 2015-2018 Peter Glotfelty <peglotfe@microsoft.com>
+License: MIT
+
+Files:
+ vendor/synstructure/*
+ vendor/synstructure-0*/*
+Copyright:
+ 2016-2019 Nika Layzell <nika@thelayzells.com>
+License: MIT
+Comment: see https://github.com/mystor/synstructure
+
+Files: vendor/tempfile/*
+Copyright: 2015-2018 Steven Allen <steven@stebalien.com>
+ 2015-2018 The Rust Project Developers
+ 2015-2018 Ashley Mannix <ashleymannix@live.com.au>
+ 2015-2018 Jason White <jasonaw0@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/Stebalien/tempfile
+
+Files: vendor/tendril/*
+Copyright: 2015-2017 Keegan McAllister <mcallister.keegan@gmail.com>
+ 2015-2017 Simon Sapin <simon.sapin@exyr.org>
+ 2015-2017 Chris Morgan <me@chrismorgan.info>
+License: MIT or Apache-2.0
+Comment: see https://github.com/servo/tendril
+
+Files: vendor/termion/*
+Copyright: 2016-2017 ticki <Ticki@users.noreply.github.com>
+ 2016-2017 gycos <alexandre.bury@gmail.com>
+ 2016-2017 IGI-111 <igi-111@protonmail.com>
+License: MIT
+Comment: see https://github.com/ticki/termion
+
+Files: vendor/termize/*
+Copyright: 2016-2020 Yuki Okushi <huyuumi.dev@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/JohnTitor/termize
+
+Files: vendor/term_size/*
+Copyright: 2016-2018 Kevin K. <kbknapp@gmail.com>
+ 2016-2018 Benjamin Sago <ogham@bsago.me>
+License: MIT or Apache-2.0
+Comment: see https://github.com/kbknapp/term_size-rs.git
+
+Files: vendor/textwrap/*
+Copyright: 2016-2017 Martin Geisler <martin@geisler.net>
+License: MIT
+Comment: see https://github.com/mgeisler/textwrap
+
+Files: vendor/toml-query_derive/*
+Copyright: 2017-2019 Matthias Beyer <mail@beyermatthias.de>
+License: MPL-2.0
+Comment: see https://github.com/matthiasbeyer/toml-query
+
+Files:
+ vendor/hashbrown/*
+ vendor/hashbrown-0*/*
+ vendor/lock_api/*
+ vendor/lock_api-0*/*
+ vendor/thread_local/*
+ vendor/thread_local-0*/*
+ vendor/parking_lot/*
+ vendor/parking_lot-0*/*
+ vendor/parking_lot_core/*
+ vendor/parking_lot_core-0*/*
+Copyright: 2016-2019 Amanieu d'Antras <amanieu@gmail.com>
+License: MIT or Apache-2.0
+Comment:
+ see https://github.com/rust-lang/hashbrown
+ see https://github.com/Amanieu/thread_local-rs
+ see https://github.com/Amanieu/parking_lot
+
+Files: vendor/petgraph/*
+Copyright: 2014-2018 bluss
+ 2014-2018 mitchmindtree
+License: MIT or Apache-2.0
+Comment: see https://github.com/bluss/petgraph
+
+Files:
+ vendor/phf/*
+ vendor/phf_codegen/*
+ vendor/phf_generator/*
+ vendor/phf_shared/*
+Copyright: 2014-2018 Steven Fackler <sfackler@gmail.com>
+License: MIT
+Comment: see https://github.com/sfackler/rust-phf
+
+Files: vendor/precomputed-hash/*
+Copyright: 2017-2017 Emilio Cobos Álvarez <emilio@crisal.io>
+License: MIT
+Comment: see https://github.com/emilio/precomputed-hash
+
+Files: vendor/pretty_assertions/*
+Copyright: 2017-2018 Colin Kiegel <kiegel@gmx.de>
+ 2017-2018 Florent Fayolle <florent.fayolle69@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/colin-kiegel/rust-pretty-assertions
+
+Files: vendor/typenum/*
+Copyright: 2015-2019 Paho Lurie-Gregg <paho@paholg.com>
+ 2015-2019 Andre Bogus <bogusandre@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/paholg/typenum
+
+Files:
+ vendor/version_check/*
+ vendor/version_check-0.1.5/*
+Copyright: 2017-2019 Sergio Benitez <sb@sergio.bz>
+License: MIT or Apache-2.0
+Comment: see https://github.com/SergioBenitez/version_check
+
+Files:
+ vendor/ucd-parse/*
+ vendor/ucd-trie/*
+ vendor/ucd-util/*
+Copyright: 2017-2020 Andrew Gallant <jamslam@gmail.com>
+License: MIT or Apache-2.0
+Comment:
+ see https://github.com/BurntSushi/rucd
+ see https://github.com/BurntSushi/ucd-generate
+
+Files: vendor/unicase/*
+Copyright: 2014-2019 Sean McArthur <sean@seanmonstar.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/seanmonstar/unicase
+
+Files:
+ vendor/unicode-normalization/*
+ vendor/unicode-segmentation/*
+ vendor/unicode-width/*
+Copyright: 2015-2019 kwantam <kwantam@gmail.com>
+License: MIT or Apache-2.0
+Comment:
+ see https://github.com/unicode-rs/unicode-normalization
+ see https://github.com/unicode-rs/unicode-segmentation
+ see https://github.com/unicode-rs/unicode-width
+
+Files:
+ vendor/unicode-xid/*
+ vendor/unicode-xid-0*/*
+Copyright: 2015-2017 erick.tryzelaar <erick.tryzelaar@gmail.com>
+ 2015-2017 kwantam <kwantam@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/unicode-rs/unicode-xid
+
+Files: vendor/vcpkg/*
+Copyright: 2017-2019 Jim McGrath <jimmc2@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/mcgoo/vcpkg-rs
+
+Files: vendor/vec_map/*
+Copyright: 2015-2017 Alexis Beingessner <a.beingessner@gmail.com>
+ 2015-2017 Andrew Paseltiner <apaseltiner@gmail.com>
+ 2015-2017 contain-rs developers
+ 2015-2017 The Rust Project Developers
+License: MIT or Apache-2.0
+Comment: see https://github.com/contain-rs/vec-map
+
+Files:
+ vendor/mac/*
+Copyright: 2014-2017 Jonathan Reem <jonathan.reem@gmail.com>
+License: MIT
+Comment:
+ see https://github.com/reem/rust-mac.git
+ see https://github.com/reem/rust-unreachable.git
+ see https://github.com/reem/rust-void.git
+
+Files: vendor/utf-8/*
+Copyright: 2015-2018 Simon Sapin <simon.sapin@exyr.org>
+License: MIT OR Apache-2.0
+Comment: see https://github.com/SimonSapin/rust-utf8
+
+Files:
+ vendor/wasi-0*/*
+ vendor/wasi/*
+Copyright: 2019-2020 The Cranelift Project Developers
+License: Apache-2.0 with LLVM exception or Apache-2.0 or MIT
+Comment: see https://github.com/CraneStation/rust-wasi
+
+Files:
+ vendor/kernel32-sys/*
+ vendor/winapi/*
+ vendor/winapi-0*/*
+ vendor/winapi-build/*
+Copyright:
+ 2014-2019 Peter Atashian <retep998@gmail.com>
+ 2014-2019 winapi-rs developers
+License: MIT
+Comment: see https://github.com/retep998/winapi-rs
+
+Files: vendor/winapi-*-pc-windows-gnu/*
+Copyright: 2014-2018 Peter Atashian <retep998@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/retep998/winapi-rs
+
+Files: vendor/xattr/*
+Copyright: 2015-2017 Steven Allen <steven@stebalien.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/Stebalien/xattr
+
+Files: vendor/yaml-rust/*
+Copyright: 2015-2017 Yuheng Chen <yuhengchen@sensetime.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/chyh1990/yaml-rust
+
+Files: vendor/bstr/*
+Copyright: 2018-2020 Andrew Gallant <jamslam@gmail.com>
+License: MIT OR Apache-2.0
+Comment: see https://github.com/BurntSushi/bstr
+
+Files: vendor/humantime-1.3.0/*
+Copyright:
+ 2016-2018 Paul Colomiets <paul@colomiets.name>
+ 2016 The humantime Developers
+ 2016 Pyfisch
+ 2005-2013 Rich Felker
+License: MIT or Apache-2.0
+
+Files: vendor/unicode-script/*
+Copyright: 2020-2020 Manish Goregaokar <manishsmail@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/unicode-rs/unicode-script
+
+Files: vendor/unicode-security/*
+Copyright: 2020-2020 Charles Lew <crlf0710@gmail.com>
+ 2020-2020 Manish Goregaokar <manishsmail@gmail.com>
+License: MIT or Apache-2.0
+Comment: see https://github.com/unicode-rs/unicode-security
+
+Files: debian/*
+Copyright: 2013-2018 Debian Rust Maintainers <pkg-rust-maintainers@alioth-lists.debian.net>
+License: MIT or Apache-2.0
+
+Files: debian/icons/rust-logo-32x32-blk.png
+Copyright: Mozilla Foundation
+License: CC-BY
+Comment:
+ Relevant discussion in https://github.com/rust-lang/rust/issues/11562
+
+License: Apache-2.0
+ On Debian systems, the full text of the Apache License Version 2.0
+ can be found in the file `/usr/share/common-licenses/Apache-2.0'.
+
+License: Apache-2.0 with LLVM exception
+ On Debian systems, the full text of the Apache License Version 2.0
+ can be found in the file `/usr/share/common-licenses/Apache-2.0'.
+ Additionally, the LLVM exception is as follows:
+ .
+ As an exception, if, as a result of your compiling your source code, portions
+ of this Software are embedded into an Object form of such source code, you
+ may redistribute such embedded portions in such Object form without complying
+ with the conditions of Sections 4(a), 4(b) and 4(d) of the License.
+ .
+ In addition, if you combine or link compiled forms of this Software with
+ software that is licensed under the GPLv2 ("Combined Software") and if a
+ court of competent jurisdiction determines that the patent provision (Section
+ 3), the indemnity provision (Section 9) or other Section of the License
+ conflicts with the conditions of the GPLv2, you may retroactively and
+ prospectively choose to deem waived or otherwise exclude such Section(s) of
+ the License, but only in their entirety and only with respect to the Combined
+ Software.
+
+License: BSD-2-clause
+ Redistribution and use in source and binary forms, with
+ or without modification, are permitted provided that the
+ following conditions are met:
+ .
+ 1. Redistributions of source code must retain the above
+ copyright notice, this list of conditions and the
+ following disclaimer.
+ 2. Redistributions in binary form must reproduce the
+ above copyright notice, this list of conditions and
+ the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+ .
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+License: CC0-1.0
+ On Debian systems, the full text of the CC0 1.0 Universal
+ License can be found in the file
+ `/usr/share/common-licenses/CC0-1.0'.
+
+License: MIT
+ Permission is hereby granted, free of charge, to any
+ person obtaining a copy of this software and associated
+ documentation files (the "Software"), to deal in the
+ Software without restriction, including without
+ limitation the rights to use, copy, modify, merge,
+ publish, distribute, sublicense, and/or sell copies of
+ the Software, and to permit persons to whom the Software
+ is furnished to do so, subject to the following
+ conditions:
+ .
+ The above copyright notice and this permission notice
+ shall be included in all copies or substantial portions
+ of the Software.
+ .
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
+ ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
+ TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+ SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
+ IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ DEALINGS IN THE SOFTWARE.
+
+License: BSL-1.0
+ Permission is hereby granted, free of charge, to any person or organization
+ obtaining a copy of the software and accompanying documentation covered by
+ this license (the "Software") to use, reproduce, display, distribute,
+ execute, and transmit the Software, and to prepare derivative works of the
+ Software, and to permit third-parties to whom the Software is furnished to
+ do so, all subject to the following:
+ .
+ The copyright notices in the Software and this entire statement, including
+ the above license grant, this restriction and the following disclaimer,
+ must be included in all copies of the Software, in whole or in part, and
+ all derivative works of the Software, unless such copies or derivative
+ works are solely in the form of machine-executable object code generated by
+ a source language processor.
+ .
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+ SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+ FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ DEALINGS IN THE SOFTWARE.
+
+License: BSD-3-clause
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the organization nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+ .
+ THIS SOFTWARE IS PROVIDED BY COPYRIGHT HOLDER AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+License: Unlicense
+ This is free and unencumbered software released into the public domain.
+ .
+ Anyone is free to copy, modify, publish, use, compile, sell, or
+ distribute this software, either in source code form or as a compiled
+ binary, for any purpose, commercial or non-commercial, and by any
+ means.
+ .
+ In jurisdictions that recognize copyright laws, the author or authors
+ of this software dedicate any and all copyright interest in the
+ software to the public domain. We make this dedication for the
+ benefit of the public at large and to the detriment of our heirs and
+ successors. We intend this dedication to be an overt act of
+ relinquishment in perpetuity of all present and future rights to this
+ software under copyright law.
+ .
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ .
+ For more information, please refer to <http://unlicense.org/>
+
+License: SIL-OPEN-FONT
+ This Font Software is licensed under the SIL Open Font License,
+ Version 1.1.
+ .
+ This license is copied below, and is also available with a FAQ at:
+ http://scripts.sil.org/OFL
+ .
+ SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
+ .
+ PREAMBLE The goals of the Open Font License (OFL) are to stimulate
+ worldwide development of collaborative font projects, to support the font
+ creation efforts of academic and linguistic communities, and to provide
+ a free and open framework in which fonts may be shared and improved in
+ partnership with others.
+ .
+ The OFL allows the licensed fonts to be used, studied, modified and
+ redistributed freely as long as they are not sold by themselves.
+ The fonts, including any derivative works, can be bundled, embedded,
+ redistributed and/or sold with any software provided that any reserved
+ names are not used by derivative works. The fonts and derivatives,
+ however, cannot be released under any other type of license. The
+ requirement for fonts to remain under this license does not apply to
+ any document created using the fonts or their derivatives.
+ .
+ DEFINITIONS
+ "Font Software" refers to the set of files released by the Copyright
+ Holder(s) under this license and clearly marked as such.
+ This may include source files, build scripts and documentation.
+ .
+ "Reserved Font Name" refers to any names specified as such after the
+ copyright statement(s).
+ .
+ "Original Version" refers to the collection of Font Software components
+ as distributed by the Copyright Holder(s).
+ .
+ "Modified Version" refers to any derivative made by adding to, deleting,
+ or substituting ? in part or in whole ?
+ any of the components of the Original Version, by changing formats or
+ by porting the Font Software to a new environment.
+ .
+ "Author" refers to any designer, engineer, programmer, technical writer
+ or other person who contributed to the Font Software.
+ .
+ PERMISSION & CONDITIONS
+ .
+ Permission is hereby granted, free of charge, to any person obtaining a
+ copy of the Font Software, to use, study, copy, merge, embed, modify,
+ redistribute, and sell modified and unmodified copies of the Font
+ Software, subject to the following conditions:
+ .
+ 1) Neither the Font Software nor any of its individual components,in
+ Original or Modified Versions, may be sold by itself.
+ .
+ 2) Original or Modified Versions of the Font Software may be bundled,
+ redistributed and/or sold with any software, provided that each copy
+ contains the above copyright notice and this license. These can be
+ included either as stand-alone text files, human-readable headers or
+ in the appropriate machine-readable metadata fields within text or
+ binary files as long as those fields can be easily viewed by the user.
+ .
+ 3) No Modified Version of the Font Software may use the Reserved Font
+ Name(s) unless explicit written permission is granted by the
+ corresponding Copyright Holder. This restriction only applies to the
+ primary font name as presented to the users.
+ .
+ 4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
+ Software shall not be used to promote, endorse or advertise any
+ Modified Version, except to acknowledge the contribution(s) of the
+ Copyright Holder(s) and the Author(s) or with their explicit written
+ permission.
+ 5) The Font Software, modified or unmodified, in part or in whole, must
+ be distributed entirely under this license, and must not be distributed
+ under any other license. The requirement for fonts to remain under
+ this license does not apply to any document created using the Font
+ Software.
+ .
+ TERMINATION
+ This license becomes null and void if any of the above conditions are not met.
+ .
+ DISCLAIMER
+ THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+ OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
+ COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
+ DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ FROM, OUT OF THE USE OR INABILITY
+
+License: GPL-2+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ .
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ .
+ On Debian systems, see /usr/share/common-licenses/GPL-2 for the full
+ text of the GPL version 2.
+
+License: CC-BY
+ Attribution 4.0 International
+ .
+ =======================================================================
+ .
+ Creative Commons Corporation ("Creative Commons") is not a law firm and
+ does not provide legal services or legal advice. Distribution of
+ Creative Commons public licenses does not create a lawyer-client or
+ other relationship. Creative Commons makes its licenses and related
+ information available on an "as-is" basis. Creative Commons gives no
+ warranties regarding its licenses, any material licensed under their
+ terms and conditions, or any related information. Creative Commons
+ disclaims all liability for damages resulting from their use to the
+ fullest extent possible.
+ .
+ Using Creative Commons Public Licenses
+ .
+ Creative Commons public licenses provide a standard set of terms and
+ conditions that creators and other rights holders may use to share
+ original works of authorship and other material subject to copyright
+ and certain other rights specified in the public license below. The
+ following considerations are for informational purposes only, are not
+ exhaustive, and do not form part of our licenses.
+ .
+ Considerations for licensors: Our public licenses are
+ intended for use by those authorized to give the public
+ permission to use material in ways otherwise restricted by
+ copyright and certain other rights. Our licenses are
+ irrevocable. Licensors should read and understand the terms
+ and conditions of the license they choose before applying it.
+ Licensors should also secure all rights necessary before
+ applying our licenses so that the public can reuse the
+ material as expected. Licensors should clearly mark any
+ material not subject to the license. This includes other CC-
+ licensed material, or material used under an exception or
+ limitation to copyright. More considerations for licensors:
+ wiki.creativecommons.org/Considerations_for_licensors
+ .
+ Considerations for the public: By using one of our public
+ licenses, a licensor grants the public permission to use the
+ licensed material under specified terms and conditions. If
+ the licensor's permission is not necessary for any reason--for
+ example, because of any applicable exception or limitation to
+ copyright--then that use is not regulated by the license. Our
+ licenses grant only permissions under copyright and certain
+ other rights that a licensor has authority to grant. Use of
+ the licensed material may still be restricted for other
+ reasons, including because others have copyright or other
+ rights in the material. A licensor may make special requests,
+ such as asking that all changes be marked or described.
+ Although not required by our licenses, you are encouraged to
+ respect those requests where reasonable. More_considerations
+ for the public:
+ wiki.creativecommons.org/Considerations_for_licensees
+ .
+ =======================================================================
+ .
+ Creative Commons Attribution 4.0 International Public License
+ .
+ By exercising the Licensed Rights (defined below), You accept and agree
+ to be bound by the terms and conditions of this Creative Commons
+ Attribution 4.0 International Public License ("Public License"). To the
+ extent this Public License may be interpreted as a contract, You are
+ granted the Licensed Rights in consideration of Your acceptance of
+ these terms and conditions, and the Licensor grants You such rights in
+ consideration of benefits the Licensor receives from making the
+ Licensed Material available under these terms and conditions.
+ .
+ .
+ Section 1 -- Definitions.
+ .
+ a. Adapted Material means material subject to Copyright and Similar
+ Rights that is derived from or based upon the Licensed Material
+ and in which the Licensed Material is translated, altered,
+ arranged, transformed, or otherwise modified in a manner requiring
+ permission under the Copyright and Similar Rights held by the
+ Licensor. For purposes of this Public License, where the Licensed
+ Material is a musical work, performance, or sound recording,
+ Adapted Material is always produced where the Licensed Material is
+ synched in timed relation with a moving image.
+ .
+ b. Adapter's License means the license You apply to Your Copyright
+ and Similar Rights in Your contributions to Adapted Material in
+ accordance with the terms and conditions of this Public License.
+ .
+ c. Copyright and Similar Rights means copyright and/or similar rights
+ closely related to copyright including, without limitation,
+ performance, broadcast, sound recording, and Sui Generis Database
+ Rights, without regard to how the rights are labeled or
+ categorized. For purposes of this Public License, the rights
+ specified in Section 2(b)(1)-(2) are not Copyright and Similar
+ Rights.
+ .
+ d. Effective Technological Measures means those measures that, in the
+ absence of proper authority, may not be circumvented under laws
+ fulfilling obligations under Article 11 of the WIPO Copyright
+ Treaty adopted on December 20, 1996, and/or similar international
+ agreements.
+ .
+ e. Exceptions and Limitations means fair use, fair dealing, and/or
+ any other exception or limitation to Copyright and Similar Rights
+ that applies to Your use of the Licensed Material.
+ .
+ f. Licensed Material means the artistic or literary work, database,
+ or other material to which the Licensor applied this Public
+ License.
+ .
+ g. Licensed Rights means the rights granted to You subject to the
+ terms and conditions of this Public License, which are limited to
+ all Copyright and Similar Rights that apply to Your use of the
+ Licensed Material and that the Licensor has authority to license.
+ .
+ h. Licensor means the individual(s) or entity(ies) granting rights
+ under this Public License.
+ .
+ i. Share means to provide material to the public by any means or
+ process that requires permission under the Licensed Rights, such
+ as reproduction, public display, public performance, distribution,
+ dissemination, communication, or importation, and to make material
+ available to the public including in ways that members of the
+ public may access the material from a place and at a time
+ individually chosen by them.
+ .
+ j. Sui Generis Database Rights means rights other than copyright
+ resulting from Directive 96/9/EC of the European Parliament and of
+ the Council of 11 March 1996 on the legal protection of databases,
+ as amended and/or succeeded, as well as other essentially
+ equivalent rights anywhere in the world.
+ .
+ k. You means the individual or entity exercising the Licensed Rights
+ under this Public License. Your has a corresponding meaning.
+ .
+ .
+ Section 2 -- Scope.
+ .
+ a. License grant.
+ .
+ 1. Subject to the terms and conditions of this Public License,
+ the Licensor hereby grants You a worldwide, royalty-free,
+ non-sublicensable, non-exclusive, irrevocable license to
+ exercise the Licensed Rights in the Licensed Material to:
+ .
+ a. reproduce and Share the Licensed Material, in whole or
+ in part; and
+ .
+ b. produce, reproduce, and Share Adapted Material.
+ .
+ 2. Exceptions and Limitations. For the avoidance of doubt, where
+ Exceptions and Limitations apply to Your use, this Public
+ License does not apply, and You do not need to comply with
+ its terms and conditions.
+ .
+ 3. Term. The term of this Public License is specified in Section
+ 6(a).
+ .
+ 4. Media and formats; technical modifications allowed. The
+ Licensor authorizes You to exercise the Licensed Rights in
+ all media and formats whether now known or hereafter created,
+ and to make technical modifications necessary to do so. The
+ Licensor waives and/or agrees not to assert any right or
+ authority to forbid You from making technical modifications
+ necessary to exercise the Licensed Rights, including
+ technical modifications necessary to circumvent Effective
+ Technological Measures. For purposes of this Public License,
+ simply making modifications authorized by this Section 2(a)
+ (4) never produces Adapted Material.
+ .
+ 5. Downstream recipients.
+ .
+ a. Offer from the Licensor -- Licensed Material. Every
+ recipient of the Licensed Material automatically
+ receives an offer from the Licensor to exercise the
+ Licensed Rights under the terms and conditions of this
+ Public License.
+ .
+ b. No downstream restrictions. You may not offer or impose
+ any additional or different terms or conditions on, or
+ apply any Effective Technological Measures to, the
+ Licensed Material if doing so restricts exercise of the
+ Licensed Rights by any recipient of the Licensed
+ Material.
+ .
+ 6. No endorsement. Nothing in this Public License constitutes or
+ may be construed as permission to assert or imply that You
+ are, or that Your use of the Licensed Material is, connected
+ with, or sponsored, endorsed, or granted official status by,
+ the Licensor or others designated to receive attribution as
+ provided in Section 3(a)(1)(A)(i).
+ .
+ b. Other rights.
+ .
+ 1. Moral rights, such as the right of integrity, are not
+ licensed under this Public License, nor are publicity,
+ privacy, and/or other similar personality rights; however, to
+ the extent possible, the Licensor waives and/or agrees not to
+ assert any such rights held by the Licensor to the limited
+ extent necessary to allow You to exercise the Licensed
+ Rights, but not otherwise.
+ .
+ 2. Patent and trademark rights are not licensed under this
+ Public License.
+ .
+ 3. To the extent possible, the Licensor waives any right to
+ collect royalties from You for the exercise of the Licensed
+ Rights, whether directly or through a collecting society
+ under any voluntary or waivable statutory or compulsory
+ licensing scheme. In all other cases the Licensor expressly
+ reserves any right to collect such royalties.
+ .
+ .
+ Section 3 -- License Conditions.
+ .
+ Your exercise of the Licensed Rights is expressly made subject to the
+ following conditions.
+ .
+ a. Attribution.
+ .
+ 1. If You Share the Licensed Material (including in modified
+ form), You must:
+ .
+ a. retain the following if it is supplied by the Licensor
+ with the Licensed Material:
+ .
+ i. identification of the creator(s) of the Licensed
+ Material and any others designated to receive
+ attribution, in any reasonable manner requested by
+ the Licensor (including by pseudonym if
+ designated);
+ .
+ ii. a copyright notice;
+ .
+ iii. a notice that refers to this Public License;
+ .
+ iv. a notice that refers to the disclaimer of
+ warranties;
+ .
+ v. a URI or hyperlink to the Licensed Material to the
+ extent reasonably practicable;
+ .
+ b. indicate if You modified the Licensed Material and
+ retain an indication of any previous modifications; and
+ .
+ c. indicate the Licensed Material is licensed under this
+ Public License, and include the text of, or the URI or
+ hyperlink to, this Public License.
+ .
+ 2. You may satisfy the conditions in Section 3(a)(1) in any
+ reasonable manner based on the medium, means, and context in
+ which You Share the Licensed Material. For example, it may be
+ reasonable to satisfy the conditions by providing a URI or
+ hyperlink to a resource that includes the required
+ information.
+ .
+ 3. If requested by the Licensor, You must remove any of the
+ information required by Section 3(a)(1)(A) to the extent
+ reasonably practicable.
+ .
+ 4. If You Share Adapted Material You produce, the Adapter's
+ License You apply must not prevent recipients of the Adapted
+ Material from complying with this Public License.
+ .
+ .
+ Section 4 -- Sui Generis Database Rights.
+ .
+ Where the Licensed Rights include Sui Generis Database Rights that
+ apply to Your use of the Licensed Material:
+ .
+ a. for the avoidance of doubt, Section 2(a)(1) grants You the right
+ to extract, reuse, reproduce, and Share all or a substantial
+ portion of the contents of the database;
+ .
+ b. if You include all or a substantial portion of the database
+ contents in a database in which You have Sui Generis Database
+ Rights, then the database in which You have Sui Generis Database
+ Rights (but not its individual contents) is Adapted Material; and
+ .
+ c. You must comply with the conditions in Section 3(a) if You Share
+ all or a substantial portion of the contents of the database.
+ .
+ For the avoidance of doubt, this Section 4 supplements and does not
+ replace Your obligations under this Public License where the Licensed
+ Rights include other Copyright and Similar Rights.
+ .
+ .
+ Section 5 -- Disclaimer of Warranties and Limitation of Liability.
+ .
+ a. UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE
+ EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS
+ AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF
+ ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS,
+ IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION,
+ WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR
+ PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS,
+ ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT
+ KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT
+ ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+ .
+ b. TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE
+ TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION,
+ NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT,
+ INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES,
+ COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR
+ USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN
+ ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR
+ DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR
+ IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+ .
+ c. The disclaimer of warranties and limitation of liability provided
+ above shall be interpreted in a manner that, to the extent
+ possible, most closely approximates an absolute disclaimer and
+ waiver of all liability.
+ .
+ .
+ Section 6 -- Term and Termination.
+ .
+ a. This Public License applies for the term of the Copyright and
+ Similar Rights licensed here. However, if You fail to comply with
+ this Public License, then Your rights under this Public License
+ terminate automatically.
+ .
+ b. Where Your right to use the Licensed Material has terminated under
+ Section 6(a), it reinstates:
+ .
+ 1. automatically as of the date the violation is cured, provided
+ it is cured within 30 days of Your discovery of the
+ violation; or
+ .
+ 2. upon express reinstatement by the Licensor.
+ .
+ For the avoidance of doubt, this Section 6(b) does not affect any
+ right the Licensor may have to seek remedies for Your violations
+ of this Public License.
+ .
+ c. For the avoidance of doubt, the Licensor may also offer the
+ Licensed Material under separate terms or conditions or stop
+ distributing the Licensed Material at any time; however, doing so
+ will not terminate this Public License.
+ .
+ d. Sections 1, 5, 6, 7, and 8 survive termination of this Public
+ License.
+ .
+ .
+ Section 7 -- Other Terms and Conditions.
+ .
+ a. The Licensor shall not be bound by any additional or different
+ terms or conditions communicated by You unless expressly agreed.
+ .
+ b. Any arrangements, understandings, or agreements regarding the
+ Licensed Material not stated herein are separate from and
+ independent of the terms and conditions of this Public License.
+ .
+ .
+ Section 8 -- Interpretation.
+ .
+ a. For the avoidance of doubt, this Public License does not, and
+ shall not be interpreted to, reduce, limit, restrict, or impose
+ conditions on any use of the Licensed Material that could lawfully
+ be made without permission under this Public License.
+ .
+ b. To the extent possible, if any provision of this Public License is
+ deemed unenforceable, it shall be automatically reformed to the
+ minimum extent necessary to make it enforceable. If the provision
+ cannot be reformed, it shall be severed from this Public License
+ without affecting the enforceability of the remaining terms and
+ conditions.
+ .
+ c. No term or condition of this Public License will be waived and no
+ failure to comply consented to unless expressly agreed to by the
+ Licensor.
+ .
+ d. Nothing in this Public License constitutes or may be interpreted
+ as a limitation upon, or waiver of, any privileges and immunities
+ that apply to the Licensor or You, including from the legal
+ processes of any jurisdiction or authority.
+ .
+ .
+ =======================================================================
+ .
+ Creative Commons is not a party to its public licenses.
+ Notwithstanding, Creative Commons may elect to apply one of its public
+ licenses to material it publishes and in those instances will be
+ considered the "Licensor." Except for the limited purpose of indicating
+ that material is shared under a Creative Commons public license or as
+ otherwise permitted by the Creative Commons policies published at
+ creativecommons.org/policies, Creative Commons does not authorize the
+ use of the trademark "Creative Commons" or any other trademark or logo
+ of Creative Commons without its prior written consent including,
+ without limitation, in connection with any unauthorized modifications
+ to any of its public licenses or any other arrangements,
+ understandings, or agreements concerning use of licensed material. For
+ the avoidance of doubt, this paragraph does not form part of the public
+ licenses.
+ .
+ Creative Commons may be contacted at creativecommons.org.
+
+License: MPL-2.0
+ This Source Code Form is subject to the terms of the Mozilla Public
+ License, v. 2.0. If a copy of the MPL was not distributed with this
+ file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ .
+ On Debian systems, see /usr/share/common-licenses/MPL-2.0 for the full
+ text of the MPL version 2.0.
--- /dev/null
+#!/bin/sh
+set -e
+
+case "$1" in
+"-N") fwd=-N; rev=-R; verb="applied";;
+"-R") fwd=-R; rev=-N; verb="reversed";;
+*) echo >&2 "Usage: $0 <-N|-R> <patch-file>"; exit 2;;
+esac
+
+if patch --dry-run -F0 -f $rev -p1 < "$2" >/dev/null; then
+ echo >&2 "patch already $verb: $2"
+ exit 0
+fi
+patch --dry-run -F0 -f $fwd -p1 < "$2"
+patch -F0 -f $fwd -p1 < "$2"
--- /dev/null
+[DEFAULT]
+pristine-tar = True
+ignore-branch = True
+
+[import-orig]
+upstream-branch = upstream/experimental
+debian-branch = debian/experimental
--- /dev/null
+#!/usr/bin/python3
+# Sometimes this might fail due to upstream changes.
+# In that case, you probably just need to override the failing step in our
+# DownloadOnlyRustBuild class below.
+
+import sys
+
+import bootstrap
+from bootstrap import RustBuild
+
+class DownloadOnlyRustBuild(RustBuild):
+ triple = None
+ def build_bootstrap(self):
+ pass
+ def run(self, *args):
+ pass
+ def build_triple(self):
+ return self.triple
+ def update_submodules(self):
+ pass
+ def bootstrap_binary(self):
+ return "true"
+
+def main(argv):
+ triple = argv.pop(1)
+ DownloadOnlyRustBuild.triple = triple
+ bootstrap.RustBuild = DownloadOnlyRustBuild
+ bootstrap.bootstrap(False)
+
+if __name__ == '__main__':
+ main(sys.argv)
--- /dev/null
+# "libstd" just seemed too generic
+libstd-rust-1.43 binary: package-name-doesnt-match-sonames
+libstd-rust-1.43 binary: sharedobject-in-library-directory-missing-soname
+
+# Rust doesn't use dev shlib symlinks nor any of the other shlib support stuff
+libstd-rust-1.43 binary: dev-pkg-without-shlib-symlink
+libstd-rust-1.43 binary: shlib-without-versioned-soname
+libstd-rust-1.43 binary: unused-shlib-entry-in-control-file
+
+# Libraries that use libc symbols (libterm, libstd, etc) *are* linked
+# to libc. Lintian gets upset that some Rust libraries don't need
+# libc, boo hoo.
+libstd-rust-1.43 binary: library-not-linked-against-libc
--- /dev/null
+# wasm object files count as arch-independent for now,
+# at least until we starting offering Debian in wasm
+libstd-rust-dev-wasm32-cross binary: arch-independent-package-contains-binary-or-object usr/lib/rustlib/wasm32-*/lib/lib*.rlib
--- /dev/null
+# I assure you, dear lintian, that "/usr/lib/rustlib/x86_64-unknown-linux-gnu/"
+# is indeed an arch-specific directory.
+libstd-rust-dev binary: arch-dependent-file-not-in-arch-specific-directory
+
+# See debhelper bug #875780. This override is commented out because it's not
+# always needed, but we want it here for documentation purposes. Basically,
+# if you see it then you probably don't need to worry about it.
+#libstd-rust-dev binary: unstripped-static-library usr/lib/rustlib/x86_64-unknown-linux-gnu/lib/lib*.rlib(*)
--- /dev/null
+#!/bin/sh
+# Pipe the output of lintian into this.
+sed -ne 's/.* file-without-copyright-information //p' | cut -d/ -f1-2 | sort -u | while read x; do
+ /usr/share/cargo/scripts/guess-crate-copyright "$x"
+done
--- /dev/null
+#!/bin/sh
+# Run this on https://github.com/llvm-mirror/llvm
+# Or another repo where the above is the "upstream" remote
+set -e
+head=$(git rev-parse --verify -q remotes/upstream/master || git rev-parse --verify -q remotes/origin/master)
+test -n "$head"
+for i in "$@"; do
+ git show $(git rev-list "$head" -n1 --grep='git-svn-id: .*@'"$i") > rL"$i".patch
+done
--- /dev/null
+#!/bin/sh
+# See README.Debian "Bootstrapping" for details.
+#
+# You may want to use `debian/rules source_orig-stage0` instead of calling this
+# directly.
+
+set -e
+
+upstream_version="$(dpkg-parsechangelog -SVersion | sed -e 's/\(.*\)-.*/\1/g')"
+upstream_bootstrap_arch="${upstream_bootstrap_arch:-amd64 arm64 armhf i386 mips64 mips64el powerpc ppc64 ppc64el s390x}"
+
+rm -f stage0/*/*.sha256
+mkdir -p stage0 build && ln -sf ../stage0 build/cache
+if [ -n "$(find stage0/ -type f)" ]; then
+ echo >&2 "$0: NOTE: extra artifacts in stage0/ will be included:"
+ find stage0/ -type f
+fi
+for deb_host_arch in $upstream_bootstrap_arch; do
+ make -s --no-print-directory -f debian/architecture-test.mk "rust-for-deb_${deb_host_arch}" | {
+ read deb_host_arch rust_triplet
+ PYTHONPATH=src/bootstrap debian/get-stage0.py "${rust_triplet}"
+ rm -rf "${rust_triplet}"
+ }
+done
+
+echo >&2 "building stage0 tar file now, this will take a while..."
+stamp=@${SOURCE_DATE_EPOCH:-$(date +%s)}
+touch --date="$stamp" stage0/dpkg-source-dont-rename-parent-directory
+tar --mtime="$stamp" --clamp-mtime \
+ --owner=root --group=root \
+ -cJf "../rustc_${upstream_version}.orig-stage0.tar.xz" \
+ --transform "s/^stage0\///" \
+ stage0/*
+
+rm -f src/bootstrap/bootstrap.pyc
+
+cat <<eof
+================================================================================
+orig-stage0 bootstrapping tarball created in ../rustc_${upstream_version}.orig-stage0.tar.xz
+containing the upstream compilers for $upstream_bootstrap_arch
+
+You *probably* now want to do the following steps:
+
+1. Add [$(echo $upstream_bootstrap_arch | sed -e 's/\S*/!\0/g')] to the rustc/cargo Build-Depends in d/control
+2. Update d/changelog
+3. Run \`dpkg-source -b .\` to generate a .dsc that includes this tarball.
+================================================================================
+eof
--- /dev/null
+Description: Ignore submodules that we're not building, or that are unused like
+ mdbook-linkcheck that pull in a ton of dependencies that are unneeded.
+Author: Ximin Luo <infinity0@debian.org>
+Forwarded: not-needed
+--- a/Cargo.toml
++++ b/Cargo.toml
+@@ -6,7 +6,6 @@ members = [
+ "src/libtest",
+ "src/librustc_codegen_llvm",
+ "src/tools/cargotest",
+- "src/tools/clippy",
+ "src/tools/compiletest",
+ "src/tools/error_index_generator",
+ "src/tools/linkchecker",
+@@ -14,14 +13,8 @@ members = [
+ "src/tools/unstable-book-gen",
+ "src/tools/tidy",
+ "src/tools/build-manifest",
+- "src/tools/remote-test-client",
+- "src/tools/remote-test-server",
+ "src/tools/rust-installer",
+- "src/tools/cargo",
+ "src/tools/rustdoc",
+- "src/tools/rls",
+- "src/tools/rustfmt",
+- "src/tools/miri",
+ "src/tools/rustdoc-themes",
+ "src/tools/unicode-table-generator",
+ ]
+@@ -47,29 +40,10 @@ debug-assertions = false
+ debug = false
+ debug-assertions = false
+
+-# We want the RLS to use the version of Cargo that we've got vendored in this
+-# repository to ensure that the same exact version of Cargo is used by both the
+-# RLS and the Cargo binary itself. The RLS depends on Cargo as a git repository
+-# so we use a `[patch]` here to override the github repository with our local
+-# vendored copy.
+-[patch."https://github.com/rust-lang/cargo"]
+-cargo = { path = "src/tools/cargo" }
+-
+ [patch.crates-io]
+-# Similar to Cargo above we want the RLS to use a vendored version of `rustfmt`
+-# that we're shipping as well (to ensure that the rustfmt in RLS and the
+-# `rustfmt` executable are the same exact version).
+-rustfmt-nightly = { path = "src/tools/rustfmt" }
+-
+-# See comments in `src/tools/rustc-workspace-hack/README.md` for what's going on
+-# here
+-rustc-workspace-hack = { path = 'src/tools/rustc-workspace-hack' }
+
+ # See comments in `tools/rustc-std-workspace-core/README.md` for what's going on
+ # here
+ rustc-std-workspace-core = { path = 'src/tools/rustc-std-workspace-core' }
+ rustc-std-workspace-alloc = { path = 'src/tools/rustc-std-workspace-alloc' }
+ rustc-std-workspace-std = { path = 'src/tools/rustc-std-workspace-std' }
+-
+-[patch."https://github.com/rust-lang/rust-clippy"]
+-clippy_lints = { path = "src/tools/clippy/clippy_lints" }
+--- a/src/bootstrap/bootstrap.py
++++ b/src/bootstrap/bootstrap.py
+@@ -705,10 +705,6 @@ class RustBuild(object):
+ os.path.join(self.rust_root, "src/bootstrap/Cargo.toml")]
+ for _ in range(1, self.verbose):
+ args.append("--verbose")
+- if self.use_locked_deps:
+- args.append("--locked")
+- if self.use_vendored_sources:
+- args.append("--frozen")
+ run(args, env=env, verbose=self.verbose)
+
+ def build_triple(self):
+--- a/src/bootstrap/builder.rs
++++ b/src/bootstrap/builder.rs
+@@ -417,7 +417,6 @@ impl<'a> Builder<'a> {
+ doc::RustdocBook,
+ doc::RustByExample,
+ doc::RustcBook,
+- doc::CargoBook,
+ doc::EmbeddedBook,
+ doc::EditionGuide,
+ ),
+@@ -439,8 +439,6 @@ impl<'a> Builder<'a> {
+ dist::Miri,
+ dist::LlvmTools,
+ dist::Lldb,
+- dist::Extended,
+- dist::HashSign
+ ),
+ Kind::Install => describe!(
+ install::Docs,
+@@ -1177,10 +1175,7 @@ impl<'a> Builder<'a> {
+ }
+ }
+
+- if self.config.locked_deps {
+- cargo.arg("--locked");
+- }
+- if self.config.vendor || self.is_sudo {
++ if self.is_sudo {
+ cargo.arg("--frozen");
+ }
+
+--- a/src/bootstrap/doc.rs
++++ b/src/bootstrap/doc.rs
+@@ -60,7 +60,6 @@ macro_rules! book {
+ // NOTE: When adding a book here, make sure to ALSO build the book by
+ // adding a build step in `src/bootstrap/builder.rs`!
+ book!(
+- CargoBook, "src/tools/cargo/src/doc", "cargo";
+ EditionGuide, "src/doc/edition-guide", "edition-guide";
+ EmbeddedBook, "src/doc/embedded-book", "embedded-book";
+ Nomicon, "src/doc/nomicon", "nomicon";
+--- a/src/doc/index.md
++++ b/src/doc/index.md
+@@ -87,7 +87,7 @@ accomplishing various tasks.
+
+ ## The Cargo Book
+
+-[The Cargo Book](cargo/index.html) is a guide to Cargo, Rust's build tool and dependency manager.
++[The Cargo Book](../../cargo-doc/doc/index.html) is a guide to Cargo, Rust's build tool and dependency manager.
+
+ ## The Rustdoc Book
+
+--- a/src/bootstrap/test.rs
++++ b/src/bootstrap/test.rs
+@@ -1472,14 +1472,7 @@ impl Step for RustcGuide {
+ }
+
+ fn run(self, builder: &Builder<'_>) {
+- let src = builder.src.join("src/doc/rustc-dev-guide");
+- let mut rustbook_cmd = builder.tool_cmd(Tool::Rustbook);
+- let toolstate = if try_run(builder, rustbook_cmd.arg("linkcheck").arg(&src)) {
+- ToolState::TestPass
+- } else {
+- ToolState::TestFail
+- };
+- builder.save_toolstate("rustc-dev-guide", toolstate);
++ builder.save_toolstate("rustc-dev-guide", ToolState::TestPass);
+ }
+ }
+
+--- a/src/bootstrap/tool.rs
++++ b/src/bootstrap/tool.rs
+@@ -273,14 +273,14 @@ pub fn prepare_tool_cargo(
+ }
+
+ fn rustbook_features() -> Vec<String> {
+- let mut features = Vec::new();
++ let features = Vec::new();
+
+ // Due to CI budged and risk of spurious failures we want to limit jobs running this check.
+ // At same time local builds should run it regardless of the platform.
+ // `CiEnv::None` means it's local build and `CHECK_LINKS` is defined in x86_64-gnu-tools to
+ // explicitly enable it on single job
+ if CiEnv::current() == CiEnv::None || env::var("CHECK_LINKS").is_ok() {
+- features.push("linkcheck".to_string());
++ // features.push("linkcheck".to_string());
+ }
+
+ features
+--- a/src/tools/rustbook/Cargo.toml
++++ b/src/tools/rustbook/Cargo.toml
+@@ -6,22 +6,16 @@ license = "MIT OR Apache-2.0"
+ edition = "2018"
+
+ [features]
+-linkcheck = ["mdbook-linkcheck", "codespan-reporting", "codespan"]
++linkcheck = []
+
+ [dependencies]
+ clap = "2.25.0"
+ failure = "0.1"
+-mdbook-linkcheck = { version = "0.5.0", optional = true }
+ # Keep in sync with mdbook-linkcheck.
+ codespan = { version = "0.5", optional = true }
+ codespan-reporting = { version = "0.5", optional = true }
+
+
+-# A noop dependency that changes in the Rust repository, it's a bit of a hack.
+-# See the `src/tools/rustc-workspace-hack/README.md` file in `rust-lang/rust`
+-# for more information.
+-rustc-workspace-hack = "1.0.0"
+-
+ [dependencies.mdbook]
+ version = "0.3.0"
+ default-features = false
+--- a/src/tools/tidy/src/deps.rs
++++ b/src/tools/tidy/src/deps.rs
+@@ -406,8 +406,8 @@ fn check_crate_duplicate(resolve: &Resol
+ // These two crates take quite a long time to build, so don't allow two versions of them
+ // to accidentally sneak into our dependency graph, in order to ensure we keep our CI times
+ // under control.
+- "cargo",
+- "rustc-ap-syntax",
++ //"cargo",
++ //"rustc-ap-syntax",
+ ];
+ let mut name_to_id: HashMap<_, Vec<_>> = HashMap::new();
+ for node in resolve.nodes.iter() {
--- /dev/null
+--- a/vendor/flate2/Cargo.toml
++++ b/vendor/flate2/Cargo.toml
+@@ -40,14 +40,6 @@ version = "0.2"
+ version = "1.0"
+ optional = true
+
+-[dependencies.miniz-sys]
+-version = "0.1.11"
+-optional = true
+-
+-[dependencies.miniz_oxide]
+-version = "0.3.2"
+-optional = true
+-
+ [dependencies.tokio-io]
+ version = "0.1.11"
+ optional = true
+@@ -71,12 +63,10 @@ version = "0.1.3"
+ version = "0.1.10"
+
+ [features]
+-default = ["rust_backend"]
+-rust_backend = ["miniz_oxide"]
++default = ["zlib"]
++rust_backend = ["zlib"]
+ tokio = ["tokio-io", "futures"]
+ zlib = ["libz-sys"]
+-[target."cfg(all(target_arch = \"wasm32\", not(target_os = \"emscripten\")))".dependencies.miniz_oxide]
+-version = "0.3.2"
+ [badges.appveyor]
+ repository = "alexcrichton/flate2-rs"
+
--- /dev/null
+--- a/vendor/pkg-config/src/lib.rs
++++ b/vendor/pkg-config/src/lib.rs
+@@ -9,8 +9,6 @@
+ //! A number of environment variables are available to globally configure how
+ //! this crate will invoke `pkg-config`:
+ //!
+-//! * `PKG_CONFIG_ALLOW_CROSS` - if this variable is not set, then `pkg-config`
+-//! will automatically be disabled for all cross compiles.
+ //! * `FOO_NO_PKG_CONFIG` - if set, this will disable running `pkg-config` when
+ //! probing for the library named `foo`.
+ //!
+@@ -106,9 +104,8 @@ pub enum Error {
+ /// Contains the name of the responsible environment variable.
+ EnvNoPkgConfig(String),
+
+- /// Cross compilation detected.
+- ///
+- /// Override with `PKG_CONFIG_ALLOW_CROSS=1`.
++ /// Cross compilation detected. Kept for compatibility;
++ /// the Debian package never emits this.
+ CrossCompilation,
+
+ /// Failed to run `pkg-config`.
+@@ -130,13 +127,9 @@ impl error::Error for Error {
+ fn description(&self) -> &str {
+ match *self {
+ Error::EnvNoPkgConfig(_) => "pkg-config requested to be aborted",
+- Error::CrossCompilation => {
+- "pkg-config doesn't handle cross compilation. \
+- Use PKG_CONFIG_ALLOW_CROSS=1 to override"
+- }
+ Error::Command { .. } => "failed to run pkg-config",
+ Error::Failure { .. } => "pkg-config did not exit sucessfully",
+- Error::__Nonexhaustive => panic!(),
++ Error::CrossCompilation | Error::__Nonexhaustive => panic!(),
+ }
+ }
+
+@@ -152,11 +145,6 @@ impl fmt::Display for Error {
+ fn fmt(&self, f: &mut fmt::Formatter) -> Result<(), fmt::Error> {
+ match *self {
+ Error::EnvNoPkgConfig(ref name) => write!(f, "Aborted because {} is set", name),
+- Error::CrossCompilation => write!(
+- f,
+- "Cross compilation detected. \
+- Use PKG_CONFIG_ALLOW_CROSS=1 to override"
+- ),
+ Error::Command {
+ ref command,
+ ref cause,
+@@ -180,7 +168,7 @@ impl fmt::Display for Error {
+ }
+ Ok(())
+ }
+- Error::__Nonexhaustive => panic!(),
++ Error::CrossCompilation | Error::__Nonexhaustive => panic!(),
+ }
+ }
+ }
+@@ -341,6 +329,8 @@ impl Config {
+ if host == target {
+ return true;
+ }
++ // always enable PKG_CONFIG_ALLOW_CROSS override in Debian
++ return true;
+
+ // pkg-config may not be aware of cross-compilation, and require
+ // a wrapper script that sets up platform-specific prefixes.
+@@ -399,7 +389,11 @@ impl Config {
+ fn command(&self, name: &str, args: &[&str]) -> Command {
+ let exe = self
+ .env_var("PKG_CONFIG")
+- .unwrap_or_else(|_| String::from("pkg-config"));
++ .unwrap_or_else(|_| {
++ self.env_var("DEB_HOST_GNU_TYPE")
++ .map(|t| t.to_string() + "-pkg-config")
++ .unwrap_or_else(|_| String::from("pkg-config"))
++ });
+ let mut cmd = Command::new(exe);
+ if self.is_static(name) {
+ cmd.arg("--static");
+--- a/vendor/pkg-config/tests/test.rs
++++ b/vendor/pkg-config/tests/test.rs
+@@ -34,7 +34,6 @@ fn find(name: &str) -> Result<pkg_config
+ pkg_config::probe_library(name)
+ }
+
+-#[test]
+ fn cross_disabled() {
+ let _g = LOCK.lock();
+ reset();
+@@ -46,7 +45,6 @@ fn cross_disabled() {
+ }
+ }
+
+-#[test]
+ fn cross_enabled() {
+ let _g = LOCK.lock();
+ reset();
--- /dev/null
+Description: Use local web resources instead of remote ones
+Author: Matthijs van Otterdijk <matthijs@wirevirt.net>
+Author: Ximin Luo <infinity0@debian.org>
+Bug: https://github.com/azerupi/mdBook/issues/271
+Comment:
+ Use https://github.com/infinity0/mdBook/tree/debian to help you rebase the
+ patch on top of a newer version.
+ .
+ Make sure the paths here match the ones in debian/rust-doc.links
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/src/tools/linkchecker/main.rs 2020-03-09 23:11:18.000000000 +0100
++++ b/src/tools/linkchecker/main.rs 2020-03-23 11:46:30.657963205 +0100
+@@ -163,6 +163,11 @@ fn check(cache: &mut Cache, root: &Path,
+ {
+ return;
+ }
++ // Ignore parent URLs, so that the package installation process can
++ // provide a symbolic link later
++ if url.starts_with("../") {
++ return;
++ }
+ let mut parts = url.splitn(2, "#");
+ let url = parts.next().unwrap();
+ let fragment = parts.next();
+--- a/vendor/mdbook/src/book/init.rs 2020-03-10 01:00:20.000000000 +0100
++++ b/vendor/mdbook/src/book/init.rs 2020-03-23 11:46:30.657963205 +0100
+@@ -148,12 +148,6 @@ impl BookBuilder {
+ let mut js = File::create(themedir.join("book.js"))?;
+ js.write_all(theme::JS)?;
+
+- let mut highlight_css = File::create(themedir.join("highlight.css"))?;
+- highlight_css.write_all(theme::HIGHLIGHT_CSS)?;
+-
+- let mut highlight_js = File::create(themedir.join("highlight.js"))?;
+- highlight_js.write_all(theme::HIGHLIGHT_JS)?;
+-
+ Ok(())
+ }
+
+--- a/vendor/mdbook/src/renderer/html_handlebars/hbs_renderer.rs 2020-03-10 01:00:20.000000000 +0100
++++ b/vendor/mdbook/src/renderer/html_handlebars/hbs_renderer.rs 2020-03-23 11:46:30.657963205 +0100
+@@ -3,7 +3,7 @@ use crate::config::{Config, HtmlConfig,
+ use crate::errors::*;
+ use crate::renderer::html_handlebars::helpers;
+ use crate::renderer::{RenderContext, Renderer};
+-use crate::theme::{self, playpen_editor, Theme};
++use crate::theme::{self, Theme};
+ use crate::utils;
+
+ use std::borrow::Cow;
+@@ -114,7 +114,7 @@ impl HtmlHandlebars {
+ &self,
+ destination: &Path,
+ theme: &Theme,
+- html_config: &HtmlConfig,
++ _html_config: &HtmlConfig,
+ ) -> Result<()> {
+ use crate::utils::fs::write_file;
+
+@@ -130,62 +130,8 @@ impl HtmlHandlebars {
+ write_file(destination, "css/print.css", &theme.print_css)?;
+ write_file(destination, "css/variables.css", &theme.variables_css)?;
+ write_file(destination, "favicon.png", &theme.favicon)?;
+- write_file(destination, "highlight.css", &theme.highlight_css)?;
+ write_file(destination, "tomorrow-night.css", &theme.tomorrow_night_css)?;
+ write_file(destination, "ayu-highlight.css", &theme.ayu_highlight_css)?;
+- write_file(destination, "highlight.js", &theme.highlight_js)?;
+- write_file(destination, "clipboard.min.js", &theme.clipboard_js)?;
+- write_file(
+- destination,
+- "FontAwesome/css/font-awesome.css",
+- theme::FONT_AWESOME,
+- )?;
+- write_file(
+- destination,
+- "FontAwesome/fonts/fontawesome-webfont.eot",
+- theme::FONT_AWESOME_EOT,
+- )?;
+- write_file(
+- destination,
+- "FontAwesome/fonts/fontawesome-webfont.svg",
+- theme::FONT_AWESOME_SVG,
+- )?;
+- write_file(
+- destination,
+- "FontAwesome/fonts/fontawesome-webfont.ttf",
+- theme::FONT_AWESOME_TTF,
+- )?;
+- write_file(
+- destination,
+- "FontAwesome/fonts/fontawesome-webfont.woff",
+- theme::FONT_AWESOME_WOFF,
+- )?;
+- write_file(
+- destination,
+- "FontAwesome/fonts/fontawesome-webfont.woff2",
+- theme::FONT_AWESOME_WOFF2,
+- )?;
+- write_file(
+- destination,
+- "FontAwesome/fonts/FontAwesome.ttf",
+- theme::FONT_AWESOME_TTF,
+- )?;
+-
+- let playpen_config = &html_config.playpen;
+-
+- // Ace is a very large dependency, so only load it when requested
+- if playpen_config.editable && playpen_config.copy_js {
+- // Load the editor
+- write_file(destination, "editor.js", playpen_editor::JS)?;
+- write_file(destination, "ace.js", playpen_editor::ACE_JS)?;
+- write_file(destination, "mode-rust.js", playpen_editor::MODE_RUST_JS)?;
+- write_file(destination, "theme-dawn.js", playpen_editor::THEME_DAWN_JS)?;
+- write_file(
+- destination,
+- "theme-tomorrow_night.js",
+- playpen_editor::THEME_TOMORROW_NIGHT_JS,
+- )?;
+- }
+
+ Ok(())
+ }
+--- a/vendor/mdbook/src/renderer/html_handlebars/search.rs 2020-03-10 01:00:20.000000000 +0100
++++ b/vendor/mdbook/src/renderer/html_handlebars/search.rs 2020-03-23 11:46:30.657963205 +0100
+@@ -34,8 +34,6 @@ pub fn create_files(search_config: &Sear
+ format!("Object.assign(window.search, {});", index).as_bytes(),
+ )?;
+ utils::fs::write_file(destination, "searcher.js", searcher::JS)?;
+- utils::fs::write_file(destination, "mark.min.js", searcher::MARK_JS)?;
+- utils::fs::write_file(destination, "elasticlunr.min.js", searcher::ELASTICLUNR_JS)?;
+ debug!("Copying search files ✓");
+ }
+
+--- a/vendor/mdbook/src/theme/index.hbs 2020-03-10 01:00:20.000000000 +0100
++++ b/vendor/mdbook/src/theme/index.hbs 2020-03-23 11:46:30.657963205 +0100
+@@ -20,12 +20,10 @@
+ <link rel="stylesheet" href="{{ path_to_root }}css/print.css" media="print">
+
+ <!-- Fonts -->
+- <link rel="stylesheet" href="{{ path_to_root }}FontAwesome/css/font-awesome.css">
+- <link href="https://fonts.googleapis.com/css?family=Open+Sans:300italic,400italic,600italic,700italic,800italic,400,300,600,700,800" rel="stylesheet" type="text/css">
+- <link href="https://fonts.googleapis.com/css?family=Source+Code+Pro:500" rel="stylesheet" type="text/css">
++ <link rel="stylesheet" href="{{ path_to_root }}../font-awesome.min.css">
+
+ <!-- Highlight.js Stylesheets -->
+- <link rel="stylesheet" href="{{ path_to_root }}highlight.css">
++ <link rel="stylesheet" href="{{ path_to_root }}../highlight.css">
+ <link rel="stylesheet" href="{{ path_to_root }}tomorrow-night.css">
+ <link rel="stylesheet" href="{{ path_to_root }}ayu-highlight.css">
+
+@@ -36,7 +34,7 @@
+
+ {{#if mathjax_support}}
+ <!-- MathJax -->
+- <script async type="text/javascript" src="https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.1/MathJax.js?config=TeX-AMS-MML_HTMLorMML"></script>
++ <script async type="text/javascript" src="../mathjax/MathJax.js?config=TeX-AMS-MML_HTMLorMML"></script>
+ {{/if}}
+ </head>
+ <body>
+@@ -46,46 +44,6 @@
+ var default_theme = window.matchMedia("(prefers-color-scheme: dark)").matches ? "{{ preferred_dark_theme }}" : "{{ default_theme }}";
+ </script>
+
+- <!-- Work around some values being stored in localStorage wrapped in quotes -->
+- <script type="text/javascript">
+- try {
+- var theme = localStorage.getItem('mdbook-theme');
+- var sidebar = localStorage.getItem('mdbook-sidebar');
+-
+- if (theme.startsWith('"') && theme.endsWith('"')) {
+- localStorage.setItem('mdbook-theme', theme.slice(1, theme.length - 1));
+- }
+-
+- if (sidebar.startsWith('"') && sidebar.endsWith('"')) {
+- localStorage.setItem('mdbook-sidebar', sidebar.slice(1, sidebar.length - 1));
+- }
+- } catch (e) { }
+- </script>
+-
+- <!-- Set the theme before any content is loaded, prevents flash -->
+- <script type="text/javascript">
+- var theme;
+- try { theme = localStorage.getItem('mdbook-theme'); } catch(e) { }
+- if (theme === null || theme === undefined) { theme = default_theme; }
+- var html = document.querySelector('html');
+- html.classList.remove('no-js')
+- html.classList.remove('{{ default_theme }}')
+- html.classList.add(theme);
+- html.classList.add('js');
+- </script>
+-
+- <!-- Hide / unhide sidebar before it is displayed -->
+- <script type="text/javascript">
+- var html = document.querySelector('html');
+- var sidebar = 'hidden';
+- if (document.body.clientWidth >= 1080) {
+- try { sidebar = localStorage.getItem('mdbook-sidebar'); } catch(e) { }
+- sidebar = sidebar || 'visible';
+- }
+- html.classList.remove('sidebar-visible');
+- html.classList.add("sidebar-" + sidebar);
+- </script>
+-
+ <nav id="sidebar" class="sidebar" aria-label="Table of contents">
+ <div id="sidebar-scrollbox" class="sidebar-scrollbox">
+ {{#toc}}{{/toc}}
+@@ -214,53 +172,7 @@
+ </script>
+ {{/if}}
+
+- {{#if google_analytics}}
+- <!-- Google Analytics Tag -->
+- <script type="text/javascript">
+- var localAddrs = ["localhost", "127.0.0.1", ""];
+-
+- // make sure we don't activate google analytics if the developer is
+- // inspecting the book locally...
+- if (localAddrs.indexOf(document.location.hostname) === -1) {
+- (function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){
+- (i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),
+- m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
+- })(window,document,'script','https://www.google-analytics.com/analytics.js','ga');
+-
+- ga('create', '{{google_analytics}}', 'auto');
+- ga('send', 'pageview');
+- }
+- </script>
+- {{/if}}
+-
+- {{#if playpen_line_numbers}}
+- <script type="text/javascript">
+- window.playpen_line_numbers = true;
+- </script>
+- {{/if}}
+-
+- {{#if playpen_copyable}}
+- <script type="text/javascript">
+- window.playpen_copyable = true;
+- </script>
+- {{/if}}
+-
+- {{#if playpen_js}}
+- <script src="{{ path_to_root }}ace.js" type="text/javascript" charset="utf-8"></script>
+- <script src="{{ path_to_root }}editor.js" type="text/javascript" charset="utf-8"></script>
+- <script src="{{ path_to_root }}mode-rust.js" type="text/javascript" charset="utf-8"></script>
+- <script src="{{ path_to_root }}theme-dawn.js" type="text/javascript" charset="utf-8"></script>
+- <script src="{{ path_to_root }}theme-tomorrow_night.js" type="text/javascript" charset="utf-8"></script>
+- {{/if}}
+-
+- {{#if search_js}}
+- <script src="{{ path_to_root }}elasticlunr.min.js" type="text/javascript" charset="utf-8"></script>
+- <script src="{{ path_to_root }}mark.min.js" type="text/javascript" charset="utf-8"></script>
+- <script src="{{ path_to_root }}searcher.js" type="text/javascript" charset="utf-8"></script>
+- {{/if}}
+-
+- <script src="{{ path_to_root }}clipboard.min.js" type="text/javascript" charset="utf-8"></script>
+- <script src="{{ path_to_root }}highlight.js" type="text/javascript" charset="utf-8"></script>
++ <script src="{{ path_to_root }}../highlight.js" type="text/javascript" charset="utf-8"></script>
+ <script src="{{ path_to_root }}book.js" type="text/javascript" charset="utf-8"></script>
+
+ <!-- Custom JS scripts -->
+--- a/vendor/mdbook/src/theme/mod.rs 2020-03-10 01:00:20.000000000 +0100
++++ b/vendor/mdbook/src/theme/mod.rs 2020-03-23 11:46:30.657963205 +0100
+@@ -1,7 +1,5 @@
+ #![allow(missing_docs)]
+
+-pub mod playpen_editor;
+-
+ #[cfg(feature = "search")]
+ pub mod searcher;
+
+@@ -19,19 +17,8 @@ pub static PRINT_CSS: &[u8] = include_by
+ pub static VARIABLES_CSS: &[u8] = include_bytes!("css/variables.css");
+ pub static FAVICON: &[u8] = include_bytes!("favicon.png");
+ pub static JS: &[u8] = include_bytes!("book.js");
+-pub static HIGHLIGHT_JS: &[u8] = include_bytes!("highlight.js");
+ pub static TOMORROW_NIGHT_CSS: &[u8] = include_bytes!("tomorrow-night.css");
+-pub static HIGHLIGHT_CSS: &[u8] = include_bytes!("highlight.css");
+ pub static AYU_HIGHLIGHT_CSS: &[u8] = include_bytes!("ayu-highlight.css");
+-pub static CLIPBOARD_JS: &[u8] = include_bytes!("clipboard.min.js");
+-pub static FONT_AWESOME: &[u8] = include_bytes!("FontAwesome/css/font-awesome.min.css");
+-pub static FONT_AWESOME_EOT: &[u8] = include_bytes!("FontAwesome/fonts/fontawesome-webfont.eot");
+-pub static FONT_AWESOME_SVG: &[u8] = include_bytes!("FontAwesome/fonts/fontawesome-webfont.svg");
+-pub static FONT_AWESOME_TTF: &[u8] = include_bytes!("FontAwesome/fonts/fontawesome-webfont.ttf");
+-pub static FONT_AWESOME_WOFF: &[u8] = include_bytes!("FontAwesome/fonts/fontawesome-webfont.woff");
+-pub static FONT_AWESOME_WOFF2: &[u8] =
+- include_bytes!("FontAwesome/fonts/fontawesome-webfont.woff2");
+-pub static FONT_AWESOME_OTF: &[u8] = include_bytes!("FontAwesome/fonts/FontAwesome.otf");
+
+ /// The `Theme` struct should be used instead of the static variables because
+ /// the `new()` method will look if the user has a theme directory in their
+@@ -49,11 +36,8 @@ pub struct Theme {
+ pub variables_css: Vec<u8>,
+ pub favicon: Vec<u8>,
+ pub js: Vec<u8>,
+- pub highlight_css: Vec<u8>,
+ pub tomorrow_night_css: Vec<u8>,
+ pub ayu_highlight_css: Vec<u8>,
+- pub highlight_js: Vec<u8>,
+- pub clipboard_js: Vec<u8>,
+ }
+
+ impl Theme {
+@@ -82,9 +66,6 @@ impl Theme {
+ &mut theme.variables_css,
+ ),
+ (theme_dir.join("favicon.png"), &mut theme.favicon),
+- (theme_dir.join("highlight.js"), &mut theme.highlight_js),
+- (theme_dir.join("clipboard.min.js"), &mut theme.clipboard_js),
+- (theme_dir.join("highlight.css"), &mut theme.highlight_css),
+ (
+ theme_dir.join("tomorrow-night.css"),
+ &mut theme.tomorrow_night_css,
+@@ -121,11 +102,8 @@ impl Default for Theme {
+ variables_css: VARIABLES_CSS.to_owned(),
+ favicon: FAVICON.to_owned(),
+ js: JS.to_owned(),
+- highlight_css: HIGHLIGHT_CSS.to_owned(),
+ tomorrow_night_css: TOMORROW_NIGHT_CSS.to_owned(),
+ ayu_highlight_css: AYU_HIGHLIGHT_CSS.to_owned(),
+- highlight_js: HIGHLIGHT_JS.to_owned(),
+- clipboard_js: CLIPBOARD_JS.to_owned(),
+ }
+ }
+ }
+@@ -175,11 +153,8 @@ mod tests {
+ "css/print.css",
+ "css/variables.css",
+ "book.js",
+- "highlight.js",
+ "tomorrow-night.css",
+- "highlight.css",
+ "ayu-highlight.css",
+- "clipboard.min.js",
+ ];
+
+ let temp = TempFileBuilder::new().prefix("mdbook-").tempdir().unwrap();
+@@ -201,11 +176,8 @@ mod tests {
+ variables_css: Vec::new(),
+ favicon: Vec::new(),
+ js: Vec::new(),
+- highlight_css: Vec::new(),
+ tomorrow_night_css: Vec::new(),
+ ayu_highlight_css: Vec::new(),
+- highlight_js: Vec::new(),
+- clipboard_js: Vec::new(),
+ };
+
+ assert_eq!(got, empty);
+--- a/vendor/mdbook/src/theme/searcher/mod.rs 2020-03-10 01:00:20.000000000 +0100
++++ b/vendor/mdbook/src/theme/searcher/mod.rs 2020-03-23 11:46:30.657963205 +0100
+@@ -2,5 +2,3 @@
+ //! the "search" cargo feature is disabled.
+
+ pub static JS: &[u8] = include_bytes!("searcher.js");
+-pub static MARK_JS: &[u8] = include_bytes!("mark.min.js");
+-pub static ELASTICLUNR_JS: &[u8] = include_bytes!("elasticlunr.min.js");
--- /dev/null
+Description: Set DT_SONAME when building dylibs
+ In Rust, library filenames include a version-specific hash to help
+ the run-time linker find the correct version. Unlike in C/C++, the
+ compiler looks for all libraries matching a glob that ignores the
+ hash and reads embedded metadata to work out versions, etc.
+ .
+ The upshot is that there is no need for the usual "libfoo.so ->
+ libfoo-1.2.3.so" symlink common with C/C++ when building with Rust,
+ and no need to communicate an alternate filename to use at run-time
+ vs compile time. If linking to a Rust dylib from C/C++ however, a
+ "libfoo.so -> libfoo-$hash.so" symlink may well be useful and in
+ this case DT_SONAME=libfoo-$hash.so would be required. More
+ mundanely, various tools (eg: dpkg-shlibdeps) complain if they don't
+ find DT_SONAME on shared libraries in public directories.
+ .
+ This patch passes -Wl,-soname=$outfile when building dylibs (and
+ using a GNU linker).
+Author: Angus Lees <gus@debian.org>
+Forwarded: no
+
+Index: rust/src/librustc_codegen_ssa/back/link.rs
+===================================================================
+--- rust.orig/src/librustc_codegen_ssa/back/link.rs
++++ rust/src/librustc_codegen_ssa/back/link.rs
+@@ -1318,6 +1318,13 @@ fn link_args<'a, B: ArchiveBuilder<'a>>(
+ cmd.args(&rpath::get_rpath_flags(&mut rpath_config));
+ }
+
++ if (crate_type == config::CrateType::Dylib || crate_type == config::CrateType::Cdylib)
++ && t.options.linker_is_gnu {
++ let filename = String::from(out_filename.file_name().unwrap().to_str().unwrap());
++ let soname = [String::from("-Wl,-soname=") + &filename];
++ cmd.args(&soname);
++ }
++
+ // Finally add all the linker arguments provided on the command line along
+ // with any #[link_args] attributes found inside the crate
+ if let Some(ref args) = sess.opts.cg.link_args {
--- /dev/null
+Description: Don't check for cargo-vendor when building from (Debian's) git
+Author: Matthijs van Otterdijk <matthijs@wirevirt.net>
+Forwarded: not-needed
+---
+Index: rust/src/bootstrap/dist.rs
+===================================================================
+--- rust.orig/src/bootstrap/dist.rs
++++ rust/src/bootstrap/dist.rs
+@@ -1084,7 +1084,10 @@ impl Step for PlainSourceTarball {
+ }
+
+ // If we're building from git sources, we need to vendor a complete distribution.
+- if builder.rust_info.is_git() {
++ //
++ // Debian: disabling this block because the debian package is also in a git
++ // repository, but cargo-vendor should not be installed or run.
++ if false && builder.rust_info.is_git() {
+ // Vendor all Cargo dependencies
+ let mut cmd = Command::new(&builder.initial_cargo);
+ cmd.arg("vendor").current_dir(&plain_dst_src);
--- /dev/null
+Description: Don't download SHA256 if it's already available locally
+ In Debian we provide the stage0 tarballs as a separate component so that the
+ buildds don't need to access the network during the build.
+Author: Ximin Luo <infinity0@debian.org>
+Forwarded: not-needed
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+Index: rust/src/bootstrap/bootstrap.py
+===================================================================
+--- rust.orig/src/bootstrap/bootstrap.py
++++ rust/src/bootstrap/bootstrap.py
+@@ -14,16 +14,18 @@ import tempfile
+ from time import time
+
+
+-def get(url, path, verbose=False):
++def get(url, path, verbose=False, use_local_hash_if_present=True):
+ suffix = '.sha256'
+ sha_url = url + suffix
+ with tempfile.NamedTemporaryFile(delete=False) as temp_file:
+ temp_path = temp_file.name
+- with tempfile.NamedTemporaryFile(suffix=suffix, delete=False) as sha_file:
+- sha_path = sha_file.name
++ sha_path = path + suffix
+
+ try:
+- download(sha_path, sha_url, False, verbose)
++ if use_local_hash_if_present and os.path.exists(sha_path):
++ print("using already-download file " + sha_path)
++ else:
++ download(sha_path, sha_url, False, verbose)
+ if os.path.exists(path):
+ if verify(path, sha_path, False):
+ if verbose:
+@@ -41,7 +43,6 @@ def get(url, path, verbose=False):
+ print("moving {} to {}".format(temp_path, path))
+ shutil.move(temp_path, path)
+ finally:
+- delete_if_present(sha_path, verbose)
+ delete_if_present(temp_path, verbose)
+
+
+@@ -419,7 +420,7 @@ class RustBuild(object):
+
+ url = "{}/dist/{}".format(self._download_url, date)
+ tarball = os.path.join(rustc_cache, filename)
+- if not os.path.exists(tarball):
++ if True:
+ get("{}/{}".format(url, filename), tarball, verbose=self.verbose)
+ unpack(tarball, tarball_suffix, self.bin_root(), match=pattern, verbose=self.verbose)
+
--- /dev/null
+Bug: https://github.com/rust-lang/rust/issues/52108
+Index: rust/src/bootstrap/bootstrap.py
+===================================================================
+--- rust.orig/src/bootstrap/bootstrap.py
++++ rust/src/bootstrap/bootstrap.py
+@@ -681,6 +681,8 @@ class RustBuild(object):
+ # preserve existing RUSTFLAGS
+ env.setdefault("RUSTFLAGS", "")
+ env["RUSTFLAGS"] += " -Cdebuginfo=2"
++ if self.build_triple().startswith('mips'):
++ env["RUSTFLAGS"] += " -Cllvm-args=-mxgot"
+
+ build_section = "target.{}".format(self.build_triple())
+ target_features = []
--- /dev/null
+Description: Work around #842634 on some machines, e.g. Debian porterboxes
+ This should remain commented-out in debian/patches/series, it's not needed everywhere
+Author: Ximin Luo <infinity0@debian.org>
+Forwarded: not-needed
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/src/libstd/sys_common/net.rs
++++ b/src/libstd/sys_common/net.rs
+@@ -609,21 +609,3 @@
+ .finish()
+ }
+ }
+-
+-#[cfg(test)]
+-mod tests {
+- use super::*;
+- use crate::collections::HashMap;
+-
+- #[test]
+- fn no_lookup_host_duplicates() {
+- let mut addrs = HashMap::new();
+- let lh = match LookupHost::try_from(("localhost", 0)) {
+- Ok(lh) => lh,
+- Err(e) => panic!("couldn't resolve `localhost': {}", e)
+- };
+- for sa in lh { *addrs.entry(sa).or_insert(0) += 1; };
+- assert_eq!(addrs.iter().filter(|&(_, &v)| v > 1).collect::<Vec<_>>(), vec![],
+- "There should be no duplicate localhost entries");
+- }
+-}
--- /dev/null
+Index: rust/src/librustc_target/spec/i686_unknown_linux_gnu.rs
+===================================================================
+--- rust.orig/src/librustc_target/spec/i686_unknown_linux_gnu.rs
++++ rust/src/librustc_target/spec/i686_unknown_linux_gnu.rs
+@@ -2,7 +2,7 @@ use crate::spec::{LinkerFlavor, Target,
+
+ pub fn target() -> TargetResult {
+ let mut base = super::linux_base::opts();
+- base.cpu = "pentium4".to_string();
++ base.cpu = "pentiumpro".to_string();
+ base.max_atomic_width = Some(64);
+ base.pre_link_args.get_mut(&LinkerFlavor::Gcc).unwrap().push("-m32".to_string());
+ base.stack_probes = true;
--- /dev/null
+Bug: https://github.com/rust-lang/rust/pull/55667
+Index: rust/src/test/ui/issues/issue-44056.rs
+===================================================================
+--- rust.orig/src/test/ui/issues/issue-44056.rs
++++ rust/src/test/ui/issues/issue-44056.rs
+@@ -1,5 +1,5 @@
+ // build-pass (FIXME(55996): should be run on targets supporting avx)
+-// only-x86_64
++// ignore-test
+ // no-prefer-dynamic
+ // compile-flags: -Ctarget-feature=+avx -Clto
+
--- /dev/null
+Description: Ignore error details with $SRC_DIR
+ We build with --remap-path-prefix so it doesn't work, see bug below
+Bug: https://github.com/rust-lang/rust/issues/53081
+
+some other small things (indentation, extra output) are also different between stock and Debian rustc
+
+--- a/src/test/ui/async-await/issues/issue-62009-1.stderr
++++ b/src/test/ui/async-await/issues/issue-62009-1.stderr
+@@ -32,11 +32,6 @@
+ |
+ LL | (|_| 2333).await;
+ | ^^^^^^^^^^^^^^^^ the trait `std::future::Future` is not implemented for `[closure@$DIR/issue-62009-1.rs:16:5: 16:15]`
+- |
+- ::: $SRC_DIR/libstd/future.rs:LL:COL
+- |
+-LL | F: Future,
+- | ------ required by this bound in `std::future::poll_with_tls_context`
+
+ error: aborting due to 4 previous errors
+
+--- a/src/test/ui/closures/closure-move-sync.stderr
++++ b/src/test/ui/closures/closure-move-sync.stderr
+@@ -3,11 +3,6 @@
+ |
+ LL | let t = thread::spawn(|| {
+ | ^^^^^^^^^^^^^ `std::sync::mpsc::Receiver<()>` cannot be shared between threads safely
+- |
+- ::: $SRC_DIR/libstd/thread/mod.rs:LL:COL
+- |
+-LL | F: Send + 'static,
+- | ---- required by this bound in `std::thread::spawn`
+ |
+ = help: the trait `std::marker::Sync` is not implemented for `std::sync::mpsc::Receiver<()>`
+ = note: required because of the requirements on the impl of `std::marker::Send` for `&std::sync::mpsc::Receiver<()>`
+@@ -18,11 +13,6 @@
+ |
+ LL | thread::spawn(|| tx.send(()).unwrap());
+ | ^^^^^^^^^^^^^ `std::sync::mpsc::Sender<()>` cannot be shared between threads safely
+- |
+- ::: $SRC_DIR/libstd/thread/mod.rs:LL:COL
+- |
+-LL | F: Send + 'static,
+- | ---- required by this bound in `std::thread::spawn`
+ |
+ = help: the trait `std::marker::Sync` is not implemented for `std::sync::mpsc::Sender<()>`
+ = note: required because of the requirements on the impl of `std::marker::Send` for `&std::sync::mpsc::Sender<()>`
+--- a/src/test/ui/consts/const-size_of-cycle.stderr
++++ b/src/test/ui/consts/const-size_of-cycle.stderr
+@@ -15,15 +15,7 @@
+ LL | bytes: [u8; std::mem::size_of::<Foo>()]
+ | ^^^^^^^^^^^^^^^^^^^^^^^^^^
+ note: ...which requires const-evaluating `std::mem::size_of`...
+- --> $SRC_DIR/libcore/mem/mod.rs:LL:COL
+- |
+-LL | intrinsics::size_of::<T>()
+- | ^^^^^^^^^^^^^^^^^^^^^^^^^^
+ note: ...which requires const-evaluating + checking `std::intrinsics::size_of`...
+- --> $SRC_DIR/libcore/intrinsics.rs:LL:COL
+- |
+-LL | pub fn size_of<T>() -> usize;
+- | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ = note: ...which requires computing layout of `Foo`...
+ = note: ...which requires normalizing `ParamEnvAnd { param_env: ParamEnv { caller_bounds: [], reveal: All, def_id: None }, value: [u8; _] }`...
+ = note: ...which again requires const-evaluating + checking `Foo::bytes::{{constant}}#0`, completing the cycle
+--- a/src/test/ui/consts/miri_unleashed/drop.stderr
++++ b/src/test/ui/consts/miri_unleashed/drop.stderr
+@@ -5,14 +5,6 @@
+ | ^^
+
+ error[E0080]: could not evaluate static initializer
+- --> $SRC_DIR/libcore/ptr/mod.rs:LL:COL
+- |
+-LL | / pub unsafe fn drop_in_place<T: ?Sized>(to_drop: *mut T) {
+-LL | | // Code here does not matter - this is replaced by the
+-LL | | // real drop glue by the compiler.
+-LL | | drop_in_place(to_drop)
+-LL | | }
+- | |_^ calling non-const function `<std::vec::Vec<i32> as std::ops::Drop>::drop`
+ |
+ ::: $DIR/drop.rs:23:1
+ |
+--- a/src/test/ui/consts/offset_from_ub.stderr
++++ b/src/test/ui/consts/offset_from_ub.stderr
+@@ -1,11 +1,4 @@
+ error: any use of this value will cause an error
+- --> $SRC_DIR/libcore/ptr/const_ptr.rs:LL:COL
+- |
+-LL | intrinsics::ptr_offset_from(self, origin)
+- | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+- | |
+- | ptr_offset_from cannot compute offset of pointers into different allocations.
+- | inside call to `std::ptr::const_ptr::<impl *const Struct>::offset_from` at $DIR/offset_from_ub.rs:22:27
+ |
+ ::: $DIR/offset_from_ub.rs:16:1
+ |
+@@ -21,13 +14,6 @@
+ = note: `#[deny(const_err)]` on by default
+
+ error: any use of this value will cause an error
+- --> $SRC_DIR/libcore/ptr/const_ptr.rs:LL:COL
+- |
+-LL | intrinsics::ptr_offset_from(self, origin)
+- | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+- | |
+- | a memory access tried to interpret some bytes as a pointer
+- | inside call to `std::ptr::const_ptr::<impl *const u8>::offset_from` at $DIR/offset_from_ub.rs:28:14
+ |
+ ::: $DIR/offset_from_ub.rs:26:1
+ |
+@@ -38,13 +24,6 @@
+ | |__-
+
+ error: any use of this value will cause an error
+- --> $SRC_DIR/libcore/ptr/const_ptr.rs:LL:COL
+- |
+-LL | intrinsics::ptr_offset_from(self, origin)
+- | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+- | |
+- | exact_div: 1 cannot be divided by 2 without remainder
+- | inside call to `std::ptr::const_ptr::<impl *const u16>::offset_from` at $DIR/offset_from_ub.rs:36:14
+ |
+ ::: $DIR/offset_from_ub.rs:31:1
+ |
+@@ -58,13 +37,6 @@
+ | |__-
+
+ error: any use of this value will cause an error
+- --> $SRC_DIR/libcore/ptr/const_ptr.rs:LL:COL
+- |
+-LL | intrinsics::ptr_offset_from(self, origin)
+- | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+- | |
+- | invalid use of NULL pointer
+- | inside call to `std::ptr::const_ptr::<impl *const u8>::offset_from` at $DIR/offset_from_ub.rs:42:14
+ |
+ ::: $DIR/offset_from_ub.rs:39:1
+ |
+@@ -76,13 +48,6 @@
+ | |__-
+
+ error: any use of this value will cause an error
+- --> $SRC_DIR/libcore/ptr/const_ptr.rs:LL:COL
+- |
+-LL | intrinsics::ptr_offset_from(self, origin)
+- | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+- | |
+- | a memory access tried to interpret some bytes as a pointer
+- | inside call to `std::ptr::const_ptr::<impl *const u8>::offset_from` at $DIR/offset_from_ub.rs:49:14
+ |
+ ::: $DIR/offset_from_ub.rs:45:1
+ |
+--- a/src/test/ui/derives/derives-span-Hash-enum-struct-variant.stderr
++++ b/src/test/ui/derives/derives-span-Hash-enum-struct-variant.stderr
+@@ -3,11 +3,6 @@
+ |
+ LL | x: Error
+ | ^^^^^^^^ the trait `std::hash::Hash` is not implemented for `Error`
+- |
+- ::: $SRC_DIR/libcore/hash/mod.rs:LL:COL
+- |
+-LL | fn hash<H: Hasher>(&self, state: &mut H);
+- | - required by this bound in `std::hash::Hash::hash`
+ |
+ = note: this error originates in a derive macro (in Nightly builds, run with -Z macro-backtrace for more info)
+
+--- a/src/test/ui/derives/derives-span-Hash-enum.stderr
++++ b/src/test/ui/derives/derives-span-Hash-enum.stderr
+@@ -3,11 +3,6 @@
+ |
+ LL | Error
+ | ^^^^^ the trait `std::hash::Hash` is not implemented for `Error`
+- |
+- ::: $SRC_DIR/libcore/hash/mod.rs:LL:COL
+- |
+-LL | fn hash<H: Hasher>(&self, state: &mut H);
+- | - required by this bound in `std::hash::Hash::hash`
+ |
+ = note: this error originates in a derive macro (in Nightly builds, run with -Z macro-backtrace for more info)
+
+--- a/src/test/ui/derives/derives-span-Hash-struct.stderr
++++ b/src/test/ui/derives/derives-span-Hash-struct.stderr
+@@ -3,11 +3,6 @@
+ |
+ LL | x: Error
+ | ^^^^^^^^ the trait `std::hash::Hash` is not implemented for `Error`
+- |
+- ::: $SRC_DIR/libcore/hash/mod.rs:LL:COL
+- |
+-LL | fn hash<H: Hasher>(&self, state: &mut H);
+- | - required by this bound in `std::hash::Hash::hash`
+ |
+ = note: this error originates in a derive macro (in Nightly builds, run with -Z macro-backtrace for more info)
+
+--- a/src/test/ui/derives/derives-span-Hash-tuple-struct.stderr
++++ b/src/test/ui/derives/derives-span-Hash-tuple-struct.stderr
+@@ -3,11 +3,6 @@
+ |
+ LL | Error
+ | ^^^^^ the trait `std::hash::Hash` is not implemented for `Error`
+- |
+- ::: $SRC_DIR/libcore/hash/mod.rs:LL:COL
+- |
+-LL | fn hash<H: Hasher>(&self, state: &mut H);
+- | - required by this bound in `std::hash::Hash::hash`
+ |
+ = note: this error originates in a derive macro (in Nightly builds, run with -Z macro-backtrace for more info)
+
+--- a/src/test/ui/derives/deriving-meta-unknown-trait.stderr
++++ b/src/test/ui/derives/deriving-meta-unknown-trait.stderr
+@@ -1,24 +1,14 @@
+ error: cannot find derive macro `Eqr` in this scope
+ --> $DIR/deriving-meta-unknown-trait.rs:5:10
+ |
+-LL | #[derive(Eqr)]
+- | ^^^ help: a derive macro with a similar name exists: `Eq`
+- |
+- ::: $SRC_DIR/libcore/cmp.rs:LL:COL
+- |
+-LL | pub macro Eq($item:item) {
+- | ------------------------ similarly named derive macro `Eq` defined here
++LL | #[derive(Eqr)]
++ | ^^^ help: a derive macro with a similar name exists: `Eq`
+
+ error: cannot find derive macro `Eqr` in this scope
+ --> $DIR/deriving-meta-unknown-trait.rs:5:10
+ |
+-LL | #[derive(Eqr)]
+- | ^^^ help: a derive macro with a similar name exists: `Eq`
+- |
+- ::: $SRC_DIR/libcore/cmp.rs:LL:COL
+- |
+-LL | pub macro Eq($item:item) {
+- | ------------------------ similarly named derive macro `Eq` defined here
++LL | #[derive(Eqr)]
++ | ^^^ help: a derive macro with a similar name exists: `Eq`
+
+ error: aborting due to 2 previous errors
+
+--- a/src/test/ui/impl-trait/impl-generic-mismatch.stderr
++++ b/src/test/ui/impl-trait/impl-generic-mismatch.stderr
+@@ -31,11 +31,6 @@
+ |
+ LL | fn hash(&self, hasher: &mut impl Hasher) {}
+ | ^^^^^^^^^^^ expected generic parameter, found `impl Trait`
+- |
+- ::: $SRC_DIR/libcore/hash/mod.rs:LL:COL
+- |
+-LL | fn hash<H: Hasher>(&self, state: &mut H);
+- | - declaration in trait here
+
+ error: aborting due to 3 previous errors
+
+--- a/src/test/ui/imports/extern-prelude-extern-crate-restricted-shadowing.stderr
++++ b/src/test/ui/imports/extern-prelude-extern-crate-restricted-shadowing.stderr
+@@ -24,10 +24,6 @@
+ LL | define_vec!();
+ | -------------- in this macro invocation
+ note: `Vec` could also refer to the struct defined here
+- --> $SRC_DIR/libstd/prelude/v1.rs:LL:COL
+- |
+-LL | pub use crate::vec::Vec;
+- | ^^^^^^^^^^^^^^^
+ = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
+
+ error: aborting due to 2 previous errors
+--- a/src/test/ui/in-band-lifetimes/mismatched_trait_impl-2.stderr
++++ b/src/test/ui/in-band-lifetimes/mismatched_trait_impl-2.stderr
+@@ -3,11 +3,6 @@
+ |
+ LL | fn deref(&self) -> &dyn Trait {
+ | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ found fn(&Struct) -> &dyn Trait
+- |
+- ::: $SRC_DIR/libcore/ops/deref.rs:LL:COL
+- |
+-LL | fn deref(&self) -> &Self::Target;
+- | --------------------------------- expected fn(&Struct) -> &(dyn Trait + 'static)
+ |
+ = note: expected `fn(&Struct) -> &(dyn Trait + 'static)`
+ found `fn(&Struct) -> &dyn Trait`
+--- a/src/test/ui/interior-mutability/interior-mutability.stderr
++++ b/src/test/ui/interior-mutability/interior-mutability.stderr
+@@ -3,11 +3,6 @@
+ |
+ LL | catch_unwind(|| { x.set(23); });
+ | ^^^^^^^^^^^^ `std::cell::UnsafeCell<i32>` may contain interior mutability and a reference may not be safely transferrable across a catch_unwind boundary
+- |
+- ::: $SRC_DIR/libstd/panic.rs:LL:COL
+- |
+-LL | pub fn catch_unwind<F: FnOnce() -> R + UnwindSafe, R>(f: F) -> Result<R> {
+- | ---------- required by this bound in `std::panic::catch_unwind`
+ |
+ = help: within `std::cell::Cell<i32>`, the trait `std::panic::RefUnwindSafe` is not implemented for `std::cell::UnsafeCell<i32>`
+ = note: required because it appears within the type `std::cell::Cell<i32>`
+--- a/src/test/ui/issues/issue-17546.stderr
++++ b/src/test/ui/issues/issue-17546.stderr
+@@ -1,13 +1,8 @@
+ error[E0573]: expected type, found variant `NoResult`
+ --> $DIR/issue-17546.rs:16:17
+ |
+-LL | fn new() -> NoResult<MyEnum, String> {
+- | ^^^^^^^^^^^^^^^^^^^^^^^^
+- |
+- ::: $SRC_DIR/libcore/result.rs:LL:COL
+- |
+-LL | pub enum Result<T, E> {
+- | --------------------- similarly named enum `Result` defined here
++LL | fn new() -> NoResult<MyEnum, String> {
++ | ^^^^^^^^^^^^^^^^^^^^^^^^
+ |
+ help: try using the variant's enum
+ |
+@@ -57,13 +52,8 @@
+ error[E0573]: expected type, found variant `NoResult`
+ --> $DIR/issue-17546.rs:37:15
+ |
+-LL | fn newer() -> NoResult<foo::MyEnum, String> {
+- | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+- |
+- ::: $SRC_DIR/libcore/result.rs:LL:COL
+- |
+-LL | pub enum Result<T, E> {
+- | --------------------- similarly named enum `Result` defined here
++LL | fn newer() -> NoResult<foo::MyEnum, String> {
++ | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ |
+ help: try using the variant's enum
+ |
+--- a/src/test/ui/issues/issue-21160.stderr
++++ b/src/test/ui/issues/issue-21160.stderr
+@@ -3,11 +3,6 @@
+ |
+ LL | struct Foo(Bar);
+ | ^^^ the trait `std::hash::Hash` is not implemented for `Bar`
+- |
+- ::: $SRC_DIR/libcore/hash/mod.rs:LL:COL
+- |
+-LL | fn hash<H: Hasher>(&self, state: &mut H);
+- | - required by this bound in `std::hash::Hash::hash`
+ |
+ = note: this error originates in a derive macro (in Nightly builds, run with -Z macro-backtrace for more info)
+
+--- a/src/test/ui/issues/issue-27033.stderr
++++ b/src/test/ui/issues/issue-27033.stderr
+@@ -3,11 +3,6 @@
+ |
+ LL | None @ _ => {}
+ | ^^^^ cannot be named the same as a unit variant
+- |
+- ::: $SRC_DIR/libstd/prelude/v1.rs:LL:COL
+- |
+-LL | pub use crate::option::Option::{self, None, Some};
+- | ---- the unit variant `None` is defined here
+
+ error[E0530]: match bindings cannot shadow constants
+ --> $DIR/issue-27033.rs:11:9
+--- a/src/test/ui/issues/issue-38857.stderr
++++ b/src/test/ui/issues/issue-38857.stderr
+@@ -11,10 +11,6 @@
+ | ^^^ this module is private
+ |
+ note: the module `sys` is defined here
+- --> $SRC_DIR/libstd/lib.rs:LL:COL
+- |
+-LL | mod sys;
+- | ^^^^^^^^
+
+ error: aborting due to 2 previous errors
+
+--- a/src/test/ui/issues/issue-7607-1.stderr
++++ b/src/test/ui/issues/issue-7607-1.stderr
+@@ -1,13 +1,8 @@
+ error[E0412]: cannot find type `Fo` in this scope
+ --> $DIR/issue-7607-1.rs:9:6
+ |
+-LL | impl Fo {
+- | ^^ help: a trait with a similar name exists: `Fn`
+- |
+- ::: $SRC_DIR/libcore/ops/function.rs:LL:COL
+- |
+-LL | pub trait Fn<Args>: FnMut<Args> {
+- | ------------------------------- similarly named trait `Fn` defined here
++LL | impl Fo {
++ | ^^ help: a trait with a similar name exists: `Fn`
+
+ error: aborting due to previous error
+
+--- a/src/test/ui/macros/macro-name-typo.stderr
++++ b/src/test/ui/macros/macro-name-typo.stderr
+@@ -1,13 +1,8 @@
+ error: cannot find macro `printlx` in this scope
+ --> $DIR/macro-name-typo.rs:6:5
+ |
+-LL | printlx!("oh noes!");
+- | ^^^^^^^ help: a macro with a similar name exists: `println`
+- |
+- ::: $SRC_DIR/libstd/macros.rs:LL:COL
+- |
+-LL | macro_rules! println {
+- | -------------------- similarly named macro `println` defined here
++LL | printlx!("oh noes!");
++ | ^^^^^^^ help: a macro with a similar name exists: `println`
+
+ error: aborting due to previous error
+
+--- a/src/test/ui/macros/macro-path-prelude-fail-3.stderr
++++ b/src/test/ui/macros/macro-path-prelude-fail-3.stderr
+@@ -1,13 +1,8 @@
+ error: cannot find macro `inline` in this scope
+ --> $DIR/macro-path-prelude-fail-3.rs:6:5
+ |
+-LL | inline!();
+- | ^^^^^^ help: a macro with a similar name exists: `line`
+- |
+- ::: $SRC_DIR/libcore/macros/mod.rs:LL:COL
+- |
+-LL | macro_rules! line {
+- | ----------------- similarly named macro `line` defined here
++LL | inline!();
++ | ^^^^^^ help: a macro with a similar name exists: `line`
+
+ error: aborting due to previous error
+
+--- a/src/test/ui/no-send-res-ports.stderr
++++ b/src/test/ui/no-send-res-ports.stderr
+@@ -10,11 +10,6 @@
+ LL | | println!("{:?}", y);
+ LL | | });
+ | |_____- within this `[closure@$DIR/no-send-res-ports.rs:29:19: 33:6 x:main::Foo]`
+- |
+- ::: $SRC_DIR/libstd/thread/mod.rs:LL:COL
+- |
+-LL | F: Send + 'static,
+- | ---- required by this bound in `std::thread::spawn`
+ |
+ = help: within `[closure@$DIR/no-send-res-ports.rs:29:19: 33:6 x:main::Foo]`, the trait `std::marker::Send` is not implemented for `std::rc::Rc<()>`
+ = note: required because it appears within the type `Port<()>`
+--- a/src/test/ui/proc-macro/parent-source-spans.stderr
++++ b/src/test/ui/proc-macro/parent-source-spans.stderr
+@@ -144,11 +144,6 @@
+ ...
+ LL | one!("hello", "world");
+ | ----------------------- in this macro invocation
+- |
+- ::: $SRC_DIR/libcore/result.rs:LL:COL
+- |
+-LL | Ok(#[stable(feature = "rust1", since = "1.0.0")] T),
+- | --------------------------------------------------- similarly named tuple variant `Ok` defined here
+ |
+ = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
+
+@@ -160,11 +155,6 @@
+ ...
+ LL | two!("yay", "rust");
+ | -------------------- in this macro invocation
+- |
+- ::: $SRC_DIR/libcore/result.rs:LL:COL
+- |
+-LL | Ok(#[stable(feature = "rust1", since = "1.0.0")] T),
+- | --------------------------------------------------- similarly named tuple variant `Ok` defined here
+ |
+ = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
+
+@@ -176,11 +166,6 @@
+ ...
+ LL | three!("hip", "hop");
+ | --------------------- in this macro invocation
+- |
+- ::: $SRC_DIR/libcore/result.rs:LL:COL
+- |
+-LL | Ok(#[stable(feature = "rust1", since = "1.0.0")] T),
+- | --------------------------------------------------- similarly named tuple variant `Ok` defined here
+ |
+ = note: this error originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
+
+--- a/src/test/ui/proc-macro/resolve-error.stderr
++++ b/src/test/ui/proc-macro/resolve-error.stderr
+@@ -74,24 +74,14 @@
+ error: cannot find derive macro `Dlone` in this scope
+ --> $DIR/resolve-error.rs:39:10
+ |
+-LL | #[derive(Dlone)]
+- | ^^^^^ help: a derive macro with a similar name exists: `Clone`
+- |
+- ::: $SRC_DIR/libcore/clone.rs:LL:COL
+- |
+-LL | pub macro Clone($item:item) {
+- | --------------------------- similarly named derive macro `Clone` defined here
++LL | #[derive(Dlone)]
++ | ^^^^^ help: a derive macro with a similar name exists: `Clone`
+
+ error: cannot find derive macro `Dlone` in this scope
+ --> $DIR/resolve-error.rs:39:10
+ |
+-LL | #[derive(Dlone)]
+- | ^^^^^ help: a derive macro with a similar name exists: `Clone`
+- |
+- ::: $SRC_DIR/libcore/clone.rs:LL:COL
+- |
+-LL | pub macro Clone($item:item) {
+- | --------------------------- similarly named derive macro `Clone` defined here
++LL | #[derive(Dlone)]
++ | ^^^^^ help: a derive macro with a similar name exists: `Clone`
+
+ error: cannot find attribute `FooWithLongNan` in this scope
+ --> $DIR/resolve-error.rs:36:3
+--- a/src/test/ui/resolve/levenshtein.stderr
++++ b/src/test/ui/resolve/levenshtein.stderr
+@@ -18,11 +18,6 @@
+ |
+ LL | type B = Opiton<u8>; // Misspelled type name from the prelude.
+ | ^^^^^^ help: an enum with a similar name exists: `Option`
+- |
+- ::: $SRC_DIR/libcore/option.rs:LL:COL
+- |
+-LL | pub enum Option<T> {
+- | ------------------ similarly named enum `Option` defined here
+
+ error[E0412]: cannot find type `Baz` in this scope
+ --> $DIR/levenshtein.rs:20:14
+--- a/src/test/ui/rfc-1937-termination-trait/termination-trait-test-wrong-type.stderr
++++ b/src/test/ui/rfc-1937-termination-trait/termination-trait-test-wrong-type.stderr
+@@ -5,11 +5,6 @@
+ LL | | "0".parse()
+ LL | | }
+ | |_^ `main` can only return types that implement `std::process::Termination`
+- |
+- ::: $SRC_DIR/libtest/lib.rs:LL:COL
+- |
+-LL | pub fn assert_test_result<T: Termination>(result: T) {
+- | ----------- required by this bound in `test::assert_test_result`
+ |
+ = help: the trait `std::process::Termination` is not implemented for `std::result::Result<f32, std::num::ParseFloatError>`
+ = note: this error originates in an attribute macro (in Nightly builds, run with -Z macro-backtrace for more info)
+--- a/src/test/ui/stability-in-private-module.stderr
++++ b/src/test/ui/stability-in-private-module.stderr
+@@ -5,10 +5,6 @@
+ | ^^^^^^^^^^^ this module is private
+ |
+ note: the module `thread_info` is defined here
+- --> $SRC_DIR/libstd/thread/mod.rs:LL:COL
+- |
+-LL | use crate::sys_common::thread_info;
+- | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ error: aborting due to previous error
+
+--- a/src/test/ui/suggestions/attribute-typos.stderr
++++ b/src/test/ui/suggestions/attribute-typos.stderr
+@@ -15,13 +15,8 @@
+ error: cannot find attribute `tests` in this scope
+ --> $DIR/attribute-typos.rs:8:3
+ |
+-LL | #[tests]
+- | ^^^^^ help: an attribute macro with a similar name exists: `test`
+- |
+- ::: $SRC_DIR/libcore/macros/mod.rs:LL:COL
+- |
+-LL | pub macro test($item:item) {
+- | -------------------------- similarly named attribute macro `test` defined here
++LL | #[tests]
++ | ^^^^^ help: an attribute macro with a similar name exists: `test`
+
+ error: cannot find attribute `deprcated` in this scope
+ --> $DIR/attribute-typos.rs:5:3
+--- a/src/test/ui/traits/trait-suggest-where-clause.stderr
++++ b/src/test/ui/traits/trait-suggest-where-clause.stderr
+@@ -6,11 +6,6 @@
+ LL | // suggest a where-clause, if needed
+ LL | mem::size_of::<U>();
+ | ^ doesn't have a size known at compile-time
+- |
+- ::: $SRC_DIR/libcore/mem/mod.rs:LL:COL
+- |
+-LL | pub const fn size_of<T>() -> usize {
+- | - required by this bound in `std::mem::size_of`
+ |
+ = help: the trait `std::marker::Sized` is not implemented for `U`
+ = note: to learn more, visit <https://doc.rust-lang.org/book/ch19-04-advanced-types.html#dynamically-sized-types-and-the-sized-trait>
+@@ -23,11 +18,6 @@
+ ...
+ LL | mem::size_of::<Misc<U>>();
+ | ^^^^^^^^^^^^^^^^^^^^^^^ doesn't have a size known at compile-time
+- |
+- ::: $SRC_DIR/libcore/mem/mod.rs:LL:COL
+- |
+-LL | pub const fn size_of<T>() -> usize {
+- | - required by this bound in `std::mem::size_of`
+ |
+ = help: within `Misc<U>`, the trait `std::marker::Sized` is not implemented for `U`
+ = note: to learn more, visit <https://doc.rust-lang.org/book/ch19-04-advanced-types.html#dynamically-sized-types-and-the-sized-trait>
+@@ -62,11 +52,6 @@
+ |
+ LL | mem::size_of::<[T]>();
+ | ^^^ doesn't have a size known at compile-time
+- |
+- ::: $SRC_DIR/libcore/mem/mod.rs:LL:COL
+- |
+-LL | pub const fn size_of<T>() -> usize {
+- | - required by this bound in `std::mem::size_of`
+ |
+ = help: the trait `std::marker::Sized` is not implemented for `[T]`
+ = note: to learn more, visit <https://doc.rust-lang.org/book/ch19-04-advanced-types.html#dynamically-sized-types-and-the-sized-trait>
+@@ -76,11 +61,6 @@
+ |
+ LL | mem::size_of::<[&U]>();
+ | ^^^^^^^^^^^^^^^^^^^^ doesn't have a size known at compile-time
+- |
+- ::: $SRC_DIR/libcore/mem/mod.rs:LL:COL
+- |
+-LL | pub const fn size_of<T>() -> usize {
+- | - required by this bound in `std::mem::size_of`
+ |
+ = help: the trait `std::marker::Sized` is not implemented for `[&U]`
+ = note: to learn more, visit <https://doc.rust-lang.org/book/ch19-04-advanced-types.html#dynamically-sized-types-and-the-sized-trait>
+--- a/src/test/ui/type_length_limit.stderr
++++ b/src/test/ui/type_length_limit.stderr
+@@ -1,8 +1,4 @@
+ error: reached the type-length limit while instantiating `std::mem::drop::<std::option::Op... G), (G, G, G), (G, G, G))))))>>`
+- --> $SRC_DIR/libcore/mem/mod.rs:LL:COL
+- |
+-LL | pub fn drop<T>(_x: T) {}
+- | ^^^^^^^^^^^^^^^^^^^^^^^^
+ |
+ = note: consider adding a `#![type_length_limit="1094"]` attribute to your crate
+
+--- a/src/test/ui/issues/issue-31173.stderr
++++ b/src/test/ui/issues/issue-31173.stderr
+@@ -12,11 +12,6 @@
+ |
+ LL | .collect();
+ | ^^^^^^^ method not found in `std::iter::Cloned<std::iter::TakeWhile<&mut std::vec::IntoIter<u8>, [closure@$DIR/issue-31173.rs:10:39: 13:6 found_e:_]>>`
+- |
+- ::: $SRC_DIR/libcore/iter/adapters/mod.rs:LL:COL
+- |
+-LL | pub struct Cloned<I> {
+- | -------------------- doesn't satisfy `_: std::iter::Iterator`
+ ...
+ LL | pub struct TakeWhile<I, P> {
+ | -------------------------- doesn't satisfy `<_ as std::iter::Iterator>::Item = &_`
+--- a/src/test/ui/mismatched_types/issue-36053-2.stderr
++++ b/src/test/ui/mismatched_types/issue-36053-2.stderr
+@@ -6,11 +6,6 @@
+ | |
+ | doesn't satisfy `<_ as std::ops::FnOnce<(&&str,)>>::Output = bool`
+ | doesn't satisfy `_: std::ops::FnMut<(&&str,)>`
+- |
+- ::: $SRC_DIR/libcore/iter/adapters/mod.rs:LL:COL
+- |
+-LL | pub struct Filter<I, P> {
+- | ----------------------- doesn't satisfy `_: std::iter::Iterator`
+ |
+ = note: the method `count` exists but the following trait bounds were not satisfied:
+ `<[closure@$DIR/issue-36053-2.rs:11:39: 11:53] as std::ops::FnOnce<(&&str,)>>::Output = bool`
+--- a/src/test/ui/suggestions/imm-ref-trait-object.stderr
++++ b/src/test/ui/suggestions/imm-ref-trait-object.stderr
+@@ -3,11 +3,6 @@
+ |
+ LL | t.min().unwrap()
+ | ^^^
+- |
+- ::: $SRC_DIR/libcore/iter/traits/iterator.rs:LL:COL
+- |
+-LL | Self: Sized,
+- | ----- this has a `Sized` requirement
+ |
+ = note: you need `&mut dyn std::iter::Iterator<Item = &u64>` instead of `&dyn std::iter::Iterator<Item = &u64>`
+
+--- a/src/test/ui/suggestions/mut-borrow-needed-by-trait.stderr
++++ b/src/test/ui/suggestions/mut-borrow-needed-by-trait.stderr
+@@ -30,11 +30,6 @@
+ |
+ LL | writeln!(fp, "hello world").unwrap();
+ | ^^^^^^^^^^^^^^^^^^^^^^^^^^^ method not found in `std::io::BufWriter<&dyn std::io::Write>`
+- |
+- ::: $SRC_DIR/libstd/io/buffered.rs:LL:COL
+- |
+-LL | pub struct BufWriter<W: Write> {
+- | ------------------------------ doesn't satisfy `_: std::io::Write`
+ |
+ = note: the method `write_fmt` exists but the following trait bounds were not satisfied:
+ `&dyn std::io::Write: std::io::Write`
+--- a/src/test/ui/traits/trait-alias/trait-alias-object-fail.stderr
++++ b/src/test/ui/traits/trait-alias/trait-alias-object-fail.stderr
+@@ -3,11 +3,6 @@
+ |
+ LL | let _: &dyn EqAlias = &123;
+ | ^^^^^^^^^^^ the trait `std::cmp::Eq` cannot be made into an object
+- |
+- ::: $SRC_DIR/libcore/cmp.rs:LL:COL
+- |
+-LL | pub trait Eq: PartialEq<Self> {
+- | --------------- the trait cannot be made into an object because it uses `Self` as a type parameter in this
+
+ error[E0191]: the value of the associated type `Item` (from trait `std::iter::Iterator`) must be specified
+ --> $DIR/trait-alias-object-fail.rs:14:17
+--- a/src/test/ui/unique-object-noncopyable.stderr
++++ b/src/test/ui/unique-object-noncopyable.stderr
+@@ -9,11 +9,6 @@
+ ...
+ LL | let _z = y.clone();
+ | ^^^^^ method not found in `std::boxed::Box<dyn Foo>`
+- |
+- ::: $SRC_DIR/liballoc/boxed.rs:LL:COL
+- |
+-LL | pub struct Box<T: ?Sized>(Unique<T>);
+- | ------------------------------------- doesn't satisfy `std::boxed::Box<dyn Foo>: std::clone::Clone`
+ |
+ = note: the method `clone` exists but the following trait bounds were not satisfied:
+ `dyn Foo: std::marker::Sized`
+--- a/src/test/ui/unique-pinned-nocopy.stderr
++++ b/src/test/ui/unique-pinned-nocopy.stderr
+@@ -6,11 +6,6 @@
+ ...
+ LL | let _j = i.clone();
+ | ^^^^^ method not found in `std::boxed::Box<R>`
+- |
+- ::: $SRC_DIR/liballoc/boxed.rs:LL:COL
+- |
+-LL | pub struct Box<T: ?Sized>(Unique<T>);
+- | ------------------------------------- doesn't satisfy `std::boxed::Box<R>: std::clone::Clone`
+ |
+ = note: the method `clone` exists but the following trait bounds were not satisfied:
+ `R: std::clone::Clone`
--- /dev/null
+Index: rust/src/rustc/Cargo.toml
+===================================================================
+--- rust.orig/src/rustc/Cargo.toml
++++ rust/src/rustc/Cargo.toml
+@@ -14,12 +14,5 @@ rustc_driver = { path = "../librustc_dri
+ # Make sure rustc_codegen_ssa ends up in the sysroot, because this
+ # crate is intended to be used by codegen backends, which may not be in-tree.
+ rustc_codegen_ssa = { path = "../librustc_codegen_ssa" }
+-
+-[dependencies.jemalloc-sys]
+-version = '0.3.0'
+-optional = true
+-features = ['unprefixed_malloc_on_supported_platforms']
+-
+ [features]
+-jemalloc = ['jemalloc-sys']
+ llvm = ['rustc_driver/llvm']
--- /dev/null
+Description: Prefer dynamic linking (currently disabled, not applied)
+ As per Debian policy, we basically revert
+ https://github.com/rust-lang/rfcs/blob/master/text/0404-change-prefer-dynamic.md
+ TODO: this does not yet work: https://github.com/rust-lang/rust/issues/43289
+ Perhaps a better method would be to modify dh-cargo instead of rustc
+Author: Ximin Luo <infinity0@debian.org>
+Forwarded: not-needed
+--- a/src/librustc/session/config.rs
++++ b/src/librustc/session/config.rs
+@@ -846,7 +846,7 @@
+ "don't run LLVM's SLP vectorization pass"),
+ soft_float: bool = (false, parse_bool, [TRACKED],
+ "use soft float ABI (*eabihf targets only)"),
+- prefer_dynamic: bool = (false, parse_bool, [TRACKED],
++ prefer_dynamic: bool = (true, parse_bool, [TRACKED],
+ "prefer dynamic linking to static linking"),
+ no_integrated_as: bool = (false, parse_bool, [TRACKED],
+ "use an external assembler rather than LLVM's integrated one"),
--- /dev/null
+Index: rust/src/bootstrap/lib.rs
+===================================================================
+--- rust.orig/src/bootstrap/lib.rs
++++ rust/src/bootstrap/lib.rs
+@@ -929,29 +929,13 @@ impl Build {
+ return s;
+ }
+
+- let beta = output(
+- Command::new("git").arg("ls-remote").arg("origin").arg("beta").current_dir(&self.src),
+- );
+- let beta = beta.trim().split_whitespace().next().unwrap();
+- let master = output(
+- Command::new("git").arg("ls-remote").arg("origin").arg("master").current_dir(&self.src),
+- );
+- let master = master.trim().split_whitespace().next().unwrap();
+-
+- // Figure out where the current beta branch started.
+- let base = output(
+- Command::new("git").arg("merge-base").arg(beta).arg(master).current_dir(&self.src),
+- );
+- let base = base.trim();
+-
+- // Next figure out how many merge commits happened since we branched off
+- // beta. That's our beta number!
++ // Debian: read beta number from "version" file, this is only available
++ // in the rustc upstream tarballs and not their git
+ let count = output(
+- Command::new("git")
+- .arg("rev-list")
+- .arg("--count")
+- .arg("--merges")
+- .arg(format!("{}...HEAD", base))
++ Command::new("sed")
++ .arg("-re")
++ .arg(r"s/[0-9]+.[0-9]+.[0-9]+-beta.([0-9]+) \(.*\)/\1/g")
++ .arg("version")
+ .current_dir(&self.src),
+ );
+ let n = count.trim().parse().unwrap();
--- /dev/null
+Description: Hardcode GDB python module directory
+ Debian package installs python modules into a fixed directory, so
+ just hardcode path in wrapper script.
+Author: Angus Lees <gus@debian.org>
+Forwarded: not-needed
+
+Index: rust/src/etc/rust-gdb
+===================================================================
+--- rust.orig/src/etc/rust-gdb
++++ rust/src/etc/rust-gdb
+@@ -3,8 +3,10 @@
+ set -e
+
+ # Find out where the pretty printer Python module is
+-RUSTC_SYSROOT=`rustc --print=sysroot`
+-GDB_PYTHON_MODULE_DIRECTORY="$RUSTC_SYSROOT/lib/rustlib/etc"
++#RUSTC_SYSROOT=`rustc --print=sysroot`
++#GDB_PYTHON_MODULE_DIRECTORY="$RUSTC_SYSROOT/lib/rustlib/etc"
++# We can just hardcode this on Debian, and remove the rustc dependency
++GDB_PYTHON_MODULE_DIRECTORY="/usr/share/rust-gdb"
+
+ # Run GDB with the additional arguments that load the pretty printers
+ # Set the environment variable `RUST_GDB` to overwrite the call to a
--- /dev/null
+Description: Hardcode LLDB python module directory
+ Debian package installs python modules into a fixed directory, so
+ just hardcode path in wrapper script.
+Author: Angus Lees <gus@debian.org>
+Forwarded: not-needed
+
+--- a/src/etc/rust-lldb
++++ b/src/etc/rust-lldb
+@@ -10,7 +10,7 @@
+ RUSTC_SYSROOT=$(rustc --print sysroot)
+ RUST_LLDB="$RUSTC_SYSROOT/lib/rustlib/$host/bin/lldb"
+
+-lldb=lldb
++lldb=lldb-9
+ if [ -f "$RUST_LLDB" ]; then
+ lldb="$RUST_LLDB"
+ else
+@@ -31,7 +31,7 @@
+ fi
+
+ # Prepare commands that will be loaded before any file on the command line has been loaded
+-script_import="command script import \"$RUSTC_SYSROOT/lib/rustlib/etc/lldb_rust_formatters.py\""
++script_import="command script import \"$RUSTC_SYSROOT/share/rust-lldb/lldb_rust_formatters.py\""
+ category_definition="type summary add --no-value --python-function lldb_rust_formatters.print_val -x \".*\" --category Rust"
+ category_enable="type category enable Rust"
+
--- /dev/null
+diff --git a/src/bootstrap/doc.rs b/src/bootstrap/doc.rs
+index 204056598..4b65359b2 100644
+--- a/src/bootstrap/doc.rs
++++ b/src/bootstrap/doc.rs
+@@ -324,15 +324,11 @@ impl Step for Standalone {
+ .arg(&builder.src.join("src/doc/index.md"))
+ .arg("--markdown-playground-url")
+ .arg("https://play.rust-lang.org/")
++ .arg("--markdown-css")
++ .arg("rust.css")
+ .arg("-o")
+ .arg(&out)
+ .arg(&path);
+-
+- if filename == "not_found.md" {
+- cmd.arg("--markdown-css").arg("https://doc.rust-lang.org/rust.css");
+- } else {
+- cmd.arg("--markdown-css").arg("rust.css");
+- }
+ builder.run(&mut cmd);
+ }
+ }
--- /dev/null
+Description: Use system compiler-rt from clang
+Forwarded: not-needed
+--- a/src/bootstrap/compile.rs
++++ b/src/bootstrap/compile.rs
+@@ -200,6 +200,12 @@
+ let mut features = builder.std_features();
+ features.push_str(&compiler_builtins_c_feature);
+
++ // In Debian this is always available
++ let llvm_config = builder.ensure(native::Llvm {
++ target: builder.config.build,
++ emscripten: false,
++ });
++ cargo.env("LLVM_CONFIG", llvm_config);
+ if compiler.stage != 0 && builder.config.sanitizers {
+ // This variable is used by the sanitizer runtime crates, e.g.
+ // rustc_lsan, to build the sanitizer runtime from C code
+@@ -208,11 +214,6 @@
+ // missing
+ // We also only build the runtimes when --enable-sanitizers (or its
+ // config.toml equivalent) is used
+- let llvm_config = builder.ensure(native::Llvm {
+- target: builder.config.build,
+- emscripten: false,
+- });
+- cargo.env("LLVM_CONFIG", llvm_config);
+ cargo.env("RUSTC_BUILD_SANITIZERS", "1");
+ }
+
+--- a/vendor/compiler_builtins/Cargo.toml
++++ b/vendor/compiler_builtins/Cargo.toml
+@@ -49,7 +49,7 @@
+ # LLVM_CONFIG or CLANG (more reliable) must be set.
+ c-system = []
+
+-c = ["c-vendor"]
++c = ["c-system"]
+ compiler-builtins = []
+ default = ["compiler-builtins"]
+ mangled-names = []
--- /dev/null
+# Patches for upstream
+
+# pending, or forwarded
+u-reproducible-build.patch
+u-test-python-3.patch
+u-make-tests-work-without-rpath.patch
+u-tests-ignore-arm.patch
+u-mips-fixes.diff
+#u-allow-system-compiler-rt.patch
+u-wasm32-libc-1625.patch
+
+# not forwarded, or forwarded but unlikely to be merged
+u-rustc-llvm-cross-flags.patch
+u-reproducible-dl-stage0.patch
+
+# Debian-specific patches, not suitable for upstream
+# Patches needed by debian/prune-unused-deps
+d-0000-ignore-removed-submodules.patch
+d-0001-disable-miniz.patch
+d-0002-pkg-config-no-special-snowflake.patch
+d-0003-mdbook-strip-embedded-libs.patch
+# Other patches needed by the full Debian build
+#d-use-system-compiler-rt.patch
+d-ignore-error-detail-diff.patch # FIXME, broken for 1.43
+d-disable-cargo-vendor.patch
+d-rust-gdb-paths
+d-rust-lldb-paths
+d-add-soname.patch
+d-dont-download-stage0.patch
+d-read-beta-version-from-file.patch
+d-ignore-avx-44056.patch
+d-i686-baseline.patch
+d-no-jemalloc.patch
+d-use-local-css.patch
+
+# Porter fixes under discussion, not suitable for upstreaming
+# as-is but a proper fix is being discussed
+d-fix-mips64el-bootstrap.patch
+
+# Work around for some porterboxes, keep this commented
+#d-host-duplicates.patch
--- /dev/null
+Description: Support linking against system clang libs
+ Note: the above PR only covers the compiler_builtins crate, rustc itself also
+ needs patching as per below once that is accepted.
+Forwarded: https://github.com/rust-lang-nursery/compiler-builtins/pull/296
+--- a/vendor/compiler_builtins/Cargo.toml
++++ b/vendor/compiler_builtins/Cargo.toml
+@@ -43,7 +43,13 @@
+ optional = true
+
+ [features]
+-c = ["cc"]
++c-vendor = ["cc"]
++
++# Link against system clang_rt.* libraries.
++# LLVM_CONFIG or CLANG (more reliable) must be set.
++c-system = []
++
++c = ["c-vendor"]
+ compiler-builtins = []
+ default = ["compiler-builtins"]
+ mangled-names = []
+--- a/vendor/compiler_builtins/build.rs
++++ b/vendor/compiler_builtins/build.rs
+@@ -37,7 +37,7 @@
+ // mangling names though we assume that we're also in test mode so we don't
+ // build anything and we rely on the upstream implementation of compiler-rt
+ // functions
+- if !cfg!(feature = "mangled-names") && cfg!(feature = "c") {
++ if !cfg!(feature = "mangled-names") && cfg!(any(feature = "c-vendor", feature = "c-system")) {
+ // Don't use a C compiler for these targets:
+ //
+ // * wasm32 - clang 8 for wasm is somewhat hard to come by and it's
+@@ -47,8 +47,10 @@
+ // compiler nor is cc-rs ready for compilation to riscv (at this
+ // time). This can probably be removed in the future
+ if !target.contains("wasm32") && !target.contains("nvptx") && !target.starts_with("riscv") {
+- #[cfg(feature = "c")]
+- c::compile(&llvm_target);
++ #[cfg(feature = "c-vendor")]
++ c_vendor::compile(&llvm_target);
++ #[cfg(feature = "c-system")]
++ c_system::compile(&llvm_target);
+ }
+ }
+
+@@ -70,17 +72,14 @@
+ }
+ }
+
+-#[cfg(feature = "c")]
+-mod c {
+- extern crate cc;
+-
++#[cfg(any(feature = "c-vendor", feature = "c-system"))]
++mod sources {
+ use std::collections::BTreeMap;
+ use std::env;
+- use std::path::PathBuf;
+
+- struct Sources {
++ pub struct Sources {
+ // SYMBOL -> PATH TO SOURCE
+- map: BTreeMap<&'static str, &'static str>,
++ pub map: BTreeMap<&'static str, &'static str>,
+ }
+
+ impl Sources {
+@@ -117,39 +116,11 @@
+ }
+ }
+
+- /// Compile intrinsics from the compiler-rt C source code
+- pub fn compile(llvm_target: &[&str]) {
++ pub fn get_sources(llvm_target: &[&str]) -> Sources {
+ let target_arch = env::var("CARGO_CFG_TARGET_ARCH").unwrap();
+ let target_env = env::var("CARGO_CFG_TARGET_ENV").unwrap();
+ let target_os = env::var("CARGO_CFG_TARGET_OS").unwrap();
+ let target_vendor = env::var("CARGO_CFG_TARGET_VENDOR").unwrap();
+- let cfg = &mut cc::Build::new();
+-
+- cfg.warnings(false);
+-
+- if target_env == "msvc" {
+- // Don't pull in extra libraries on MSVC
+- cfg.flag("/Zl");
+-
+- // Emulate C99 and C++11's __func__ for MSVC prior to 2013 CTP
+- cfg.define("__func__", Some("__FUNCTION__"));
+- } else {
+- // Turn off various features of gcc and such, mostly copying
+- // compiler-rt's build system already
+- cfg.flag("-fno-builtin");
+- cfg.flag("-fvisibility=hidden");
+- cfg.flag("-ffreestanding");
+- // Avoid the following warning appearing once **per file**:
+- // clang: warning: optimization flag '-fomit-frame-pointer' is not supported for target 'armv7' [-Wignored-optimization-argument]
+- //
+- // Note that compiler-rt's build system also checks
+- //
+- // `check_cxx_compiler_flag(-fomit-frame-pointer COMPILER_RT_HAS_FOMIT_FRAME_POINTER_FLAG)`
+- //
+- // in https://github.com/rust-lang/compiler-rt/blob/c8fbcb3/cmake/config-ix.cmake#L19.
+- cfg.flag_if_supported("-fomit-frame-pointer");
+- cfg.define("VISIBILITY_HIDDEN", None);
+- }
+
+ let mut sources = Sources::new();
+ sources.extend(&[
+@@ -411,6 +382,48 @@
+ sources.remove(&["__aeabi_cdcmp", "__aeabi_cfcmp"]);
+ }
+
++ sources
++ }
++}
++
++#[cfg(feature = "c-vendor")]
++mod c_vendor {
++ extern crate cc;
++
++ use std::env;
++ use std::path::PathBuf;
++ use sources;
++
++ /// Compile intrinsics from the compiler-rt C source code
++ pub fn compile(llvm_target: &[&str]) {
++ let target_env = env::var("CARGO_CFG_TARGET_ENV").unwrap();
++ let cfg = &mut cc::Build::new();
++ cfg.warnings(false);
++
++ if target_env == "msvc" {
++ // Don't pull in extra libraries on MSVC
++ cfg.flag("/Zl");
++
++ // Emulate C99 and C++11's __func__ for MSVC prior to 2013 CTP
++ cfg.define("__func__", Some("__FUNCTION__"));
++ } else {
++ // Turn off various features of gcc and such, mostly copying
++ // compiler-rt's build system already
++ cfg.flag("-fno-builtin");
++ cfg.flag("-fvisibility=hidden");
++ cfg.flag("-ffreestanding");
++ // Avoid the following warning appearing once **per file**:
++ // clang: warning: optimization flag '-fomit-frame-pointer' is not supported for target 'armv7' [-Wignored-optimization-argument]
++ //
++ // Note that compiler-rt's build system also checks
++ //
++ // `check_cxx_compiler_flag(-fomit-frame-pointer COMPILER_RT_HAS_FOMIT_FRAME_POINTER_FLAG)`
++ //
++ // in https://github.com/rust-lang/compiler-rt/blob/c8fbcb3/cmake/config-ix.cmake#L19.
++ cfg.flag_if_supported("-fomit-frame-pointer");
++ cfg.define("VISIBILITY_HIDDEN", None);
++ }
++
+ // When compiling the C code we require the user to tell us where the
+ // source code is, and this is largely done so when we're compiling as
+ // part of rust-lang/rust we can use the same llvm-project repository as
+@@ -423,6 +436,7 @@
+ panic!("RUST_COMPILER_RT_ROOT={} does not exist", root.display());
+ }
+
++ let sources = sources::get_sources(llvm_target);
+ let src_dir = root.join("lib/builtins");
+ for (sym, src) in sources.map.iter() {
+ let src = src_dir.join(src);
+@@ -434,3 +448,103 @@
+ cfg.compile("libcompiler-rt.a");
+ }
+ }
++
++#[cfg(feature = "c-system")]
++mod c_system {
++ use std::env;
++ use std::process::{Command, Output};
++ use std::str;
++ use std::path::Path;
++ use sources;
++
++ fn success_output(err: &str, cmd: &mut Command) -> Output {
++ let output = cmd.output().expect(err);
++ let status = output.status;
++ if !status.success() {
++ panic!("{}: {:?}", err, status.code());
++ }
++ output
++ }
++
++ // This can be obtained by adding the line:
++ // message(STATUS "All builtin supported architectures: ${ALL_BUILTIN_SUPPORTED_ARCH}")
++ // to the bottom of compiler-rt/cmake/builtin-config-ix.cmake, then running
++ // cmake and looking at the output.
++ const ALL_SUPPORTED_ARCHES : &'static str = "i386;x86_64;arm;armhf;armv6m;armv7m;armv7em;armv7;armv7s;armv7k;aarch64;hexagon;mips;mipsel;mips64;mips64el;powerpc64;powerpc64le;riscv32;riscv64;wasm32;wasm64";
++
++ // This function recreates the logic of getArchNameForCompilerRTLib,
++ // defined in clang/lib/Driver/ToolChain.cpp.
++ fn get_arch_name_for_compiler_rtlib() -> String {
++ let target = env::var("TARGET").unwrap();
++ let target_arch = env::var("CARGO_CFG_TARGET_ARCH").unwrap();
++ let target_os = env::var("CARGO_CFG_TARGET_OS").unwrap();
++ let r = match target_arch.as_str() {
++ "arm" => if target.ends_with("eabihf") && target_os != "windows" {
++ "armhf"
++ } else {
++ "arm"
++ },
++ "x86" => if target_os == "android" {
++ "i686"
++ } else {
++ "i386"
++ },
++ _ => target_arch.as_str(),
++ };
++ r.to_string()
++ }
++
++ /// Link against system clang runtime libraries
++ pub fn compile(llvm_target: &[&str]) {
++ let target = env::var("TARGET").unwrap();
++ let target_os = env::var("CARGO_CFG_TARGET_OS").unwrap();
++ let compiler_rt_arch = get_arch_name_for_compiler_rtlib();
++
++ if ALL_SUPPORTED_ARCHES.split(";").find(|x| *x == compiler_rt_arch) == None {
++ return;
++ }
++
++ if let Ok(clang) = env::var("CLANG") {
++ let output = success_output(
++ "failed to find clang's compiler-rt",
++ Command::new(clang)
++ .arg(format!("--target={}", target))
++ .arg("--rtlib=compiler-rt")
++ .arg("--print-libgcc-file-name"),
++ );
++ let fullpath = Path::new(str::from_utf8(&output.stdout).unwrap());
++ let libpath = fullpath.parent().unwrap().display();
++ let libname = fullpath
++ .file_stem()
++ .unwrap()
++ .to_str()
++ .unwrap()
++ .trim_start_matches("lib");
++ println!("cargo:rustc-link-search=native={}", libpath);
++ println!("cargo:rustc-link-lib=static={}", libname);
++ } else if let Ok(llvm_config) = env::var("LLVM_CONFIG") {
++ // fallback if clang is not installed
++ let (subpath, libname) = match target_os.as_str() {
++ "linux" => ("linux", format!("clang_rt.builtins-{}", &compiler_rt_arch)),
++ "macos" => ("darwin", "clang_rt.builtins_osx_dynamic".to_string()),
++ _ => panic!("unsupported target os: {}", target_os),
++ };
++ let cmd = format!("ls -1d $({} --libdir)/clang/*/lib/{}", llvm_config, subpath);
++ let output = success_output(
++ "failed to find clang's lib dir",
++ Command::new("sh").args(&["-ec", &cmd]),
++ );
++ for search_dir in str::from_utf8(&output.stdout).unwrap().lines() {
++ println!("cargo:rustc-link-search=native={}", search_dir);
++ }
++ println!("cargo:rustc-link-lib=static={}", libname);
++ } else {
++ panic!("neither CLANG nor LLVM_CONFIG could be read");
++ }
++
++ let sources = sources::get_sources(llvm_target);
++ for (sym, _src) in sources.map.iter() {
++ println!("cargo:rustc-cfg={}=\"optimized-c\"", sym);
++ }
++ }
++}
+--- a/src/bootstrap/compile.rs
++++ b/src/bootstrap/compile.rs
+@@ -213,6 +213,7 @@
+ emscripten: false,
+ });
+ cargo.env("LLVM_CONFIG", llvm_config);
++ cargo.env("RUSTC_BUILD_SANITIZERS", "1");
+ }
+
+ cargo.arg("--features").arg(features)
+--- a/src/librustc_asan/build.rs
++++ b/src/librustc_asan/build.rs
+@@ -4,6 +4,9 @@
+ use cmake::Config;
+
+ fn main() {
++ if env::var("RUSTC_BUILD_SANITIZERS") != Ok("1".to_string()) {
++ return;
++ }
+ if let Some(llvm_config) = env::var_os("LLVM_CONFIG") {
+ build_helper::restore_library_path();
+
+--- a/src/librustc_lsan/build.rs
++++ b/src/librustc_lsan/build.rs
+@@ -4,6 +4,9 @@
+ use cmake::Config;
+
+ fn main() {
++ if env::var("RUSTC_BUILD_SANITIZERS") != Ok("1".to_string()) {
++ return;
++ }
+ if let Some(llvm_config) = env::var_os("LLVM_CONFIG") {
+ build_helper::restore_library_path();
+
+--- a/src/librustc_msan/build.rs
++++ b/src/librustc_msan/build.rs
+@@ -4,6 +4,9 @@
+ use cmake::Config;
+
+ fn main() {
++ if env::var("RUSTC_BUILD_SANITIZERS") != Ok("1".to_string()) {
++ return;
++ }
+ if let Some(llvm_config) = env::var_os("LLVM_CONFIG") {
+ build_helper::restore_library_path();
+
+--- a/src/librustc_tsan/build.rs
++++ b/src/librustc_tsan/build.rs
+@@ -4,6 +4,9 @@
+ use cmake::Config;
+
+ fn main() {
++ if env::var("RUSTC_BUILD_SANITIZERS") != Ok("1".to_string()) {
++ return;
++ }
+ if let Some(llvm_config) = env::var_os("LLVM_CONFIG") {
+ build_helper::restore_library_path();
+
--- /dev/null
+Author: Chris Coulson <chris.coulson@canonical.com>
+Forwarded: TODO
+--- a/src/test/run-make-fulldeps/sysroot-crates-are-unstable/Makefile
++++ b/src/test/run-make-fulldeps/sysroot-crates-are-unstable/Makefile
+@@ -1,2 +1,6 @@
++include ../tools.mk
++
++RUSTC := $(RUSTC_ORIGINAL)
++
+ all:
+- python3 test.py
++ $(HOST_RPATH_ENV) python3 test.py
--- /dev/null
+Description: Various fixes for Rust on MIPS
+Author: Dragan Mladjenovic <dmladjenovic@wavecomp.com>
+Bug-Debian: https://bugs.debian.org/881845
+Last-Update: 2020-03-23
+
+Index: rust/src/librustc_codegen_llvm/llvm_util.rs
+===================================================================
+--- rust.orig/src/librustc_codegen_llvm/llvm_util.rs
++++ rust/src/librustc_codegen_llvm/llvm_util.rs
+@@ -108,6 +108,12 @@ unsafe fn configure_llvm(sess: &Session)
+ // during inlining. Unfortunately these may block other optimizations.
+ add("-preserve-alignment-assumptions-during-inlining=false", false);
+
++ if sess.target.target.arch == "mips"
++ || sess.target.target.arch == "mips64"
++ {
++ add("-fast-isel=0", false);
++ }
++
+ for arg in sess_args {
+ add(&(*arg), true);
+ }
--- /dev/null
+Description: Don't split dwarf debug for a fully-reproducible build
+Author: Ximin Luo <infinity0@debian.org>
+Bug: https://github.com/rust-lang/rust/issues/34902
+
+Index: rust/src/librustc_llvm/build.rs
+===================================================================
+--- rust.orig/src/librustc_llvm/build.rs
++++ rust/src/librustc_llvm/build.rs
+@@ -121,6 +121,11 @@ fn main() {
+ let mut cfg = cc::Build::new();
+ cfg.warnings(false);
+ for flag in cxxflags.split_whitespace() {
++ // Split-dwarf gives unreproducible DW_AT_GNU_dwo_id so don't do it
++ if flag == "-gsplit-dwarf" {
++ continue;
++ }
++
+ // Ignore flags like `-m64` when we're doing a cross build
+ if is_crossed && flag.starts_with("-m") {
+ continue;
--- /dev/null
+Index: rust/src/bootstrap/bootstrap.py
+===================================================================
+--- rust.orig/src/bootstrap/bootstrap.py
++++ rust/src/bootstrap/bootstrap.py
+@@ -81,7 +81,7 @@ def _download(path, url, probably_big, v
+ run(["curl", option,
+ "-y", "30", "-Y", "10", # timeout if speed is < 10 bytes/sec for > 30 seconds
+ "--connect-timeout", "30", # timeout if cannot connect within 30 seconds
+- "--retry", "3", "-Sf", "-o", path, url],
++ "--retry", "3", "-Sf", "-o", path, "-R", url],
+ verbose=verbose,
+ exception=exception)
+
--- /dev/null
+Index: rust/src/librustc_llvm/build.rs
+===================================================================
+--- rust.orig/src/librustc_llvm/build.rs
++++ rust/src/librustc_llvm/build.rs
+@@ -223,7 +223,7 @@ fn main() {
+ if is_crossed {
+ if lib.starts_with("-LIBPATH:") {
+ println!("cargo:rustc-link-search=native={}", lib[9..].replace(&host, &target));
+- } else if lib.starts_with("-L") {
++ } else if lib.starts_with("-L") && lib[2..].contains(&host) {
+ println!("cargo:rustc-link-search=native={}", lib[2..].replace(&host, &target));
+ }
+ } else if lib.starts_with("-LIBPATH:") {
--- /dev/null
+--- a/src/test/run-make-fulldeps/sysroot-crates-are-unstable/Makefile
++++ b/src/test/run-make-fulldeps/sysroot-crates-are-unstable/Makefile
+@@ -1,2 +1,2 @@
+ all:
+- python2.7 test.py
++ python3 test.py
--- /dev/null
+Bug: https://github.com/rust-lang/rust/issues/67242
+Description: this test is new in 1.40 and the failure is present on many
+ previous rust versions without users having complained or noticed, so
+ just ignore the failure until upstream fixes it
+--- a/src/test/run-make-fulldeps/foreign-exceptions/Makefile
++++ b/src/test/run-make-fulldeps/foreign-exceptions/Makefile
+@@ -1,3 +1,5 @@
++# ignore-arm
++
+ -include ../tools.mk
+
+ all: foo
--- /dev/null
+From 93743ca83972e33411c2812dc285840006d21140 Mon Sep 17 00:00:00 2001
+From: Alex Crichton <alex@alexcrichton.com>
+Date: Mon, 16 Dec 2019 07:57:52 -0800
+Subject: [PATCH] Update bindings for the wasm32-wasi target
+
+This commit performs a number of updates for libc with the `wasm32-wasi`
+target:
+
+* Updates the `wasi-libc` repository commit used (previously known as
+ `wasi-sysroot`)
+* Updates the container to Ubuntu 19.10 which has Clang 9 packaged which
+ is all we need.
+* Avoids building `wasmtime` and instead downloads a precompiled binary.
+* Updates bindings in `src/wasi.rs` to match the current upstream state.
+---
+ ci/docker/wasm32-wasi/Dockerfile | 82 ++++++--------------------------
+ ci/docker/wasm32-wasi/clang.sh | 2 +-
+ ci/run.sh | 6 +--
+ libc-test/build.rs | 6 ++-
+ src/wasi.rs | 13 ++---
+ 5 files changed, 28 insertions(+), 81 deletions(-)
+
+diff --git a/src/wasi.rs b/src/wasi.rs
+index 2e0914dcadc..081141e44d2 100644
+--- a/vendor/libc/src/wasi.rs
++++ b/vendor/libc/src/wasi.rs
+@@ -174,9 +174,9 @@ pub const EXIT_FAILURE: c_int = 1;
+ pub const STDIN_FILENO: c_int = 0;
+ pub const STDOUT_FILENO: c_int = 1;
+ pub const STDERR_FILENO: c_int = 2;
+-pub const SEEK_SET: c_int = 2;
+-pub const SEEK_CUR: c_int = 0;
+-pub const SEEK_END: c_int = 1;
++pub const SEEK_SET: c_int = 0;
++pub const SEEK_CUR: c_int = 1;
++pub const SEEK_END: c_int = 2;
+ pub const _IOFBF: c_int = 0;
+ pub const _IONBF: c_int = 2;
+ pub const _IOLBF: c_int = 1;
+@@ -207,8 +207,8 @@ pub const AT_EACCESS: c_int = 0x0;
+ pub const AT_SYMLINK_NOFOLLOW: c_int = 0x1;
+ pub const AT_SYMLINK_FOLLOW: c_int = 0x2;
+ pub const AT_REMOVEDIR: c_int = 0x4;
+-pub const UTIME_OMIT: c_long = 1073741822;
+-pub const UTIME_NOW: c_long = 1073741823;
++pub const UTIME_OMIT: c_long = 0xfffffffe;
++pub const UTIME_NOW: c_long = 0xffffffff;
+
+ pub const E2BIG: c_int = 1;
+ pub const EACCES: c_int = 2;
+@@ -728,11 +728,8 @@ extern "C" {
+ pub fn __wasilibc_fd_renumber(fd: c_int, newfd: c_int) -> c_int;
+ pub fn __wasilibc_unlinkat(fd: c_int, path: *const c_char) -> c_int;
+ pub fn __wasilibc_rmdirat(fd: c_int, path: *const c_char) -> c_int;
+- pub fn __wasilibc_init_preopen();
+ pub fn __wasilibc_find_relpath(
+ path: *const c_char,
+- rights_base: __wasi_rights_t,
+- rights_inheriting: __wasi_rights_t,
+ relative_path: *mut *const c_char,
+ ) -> c_int;
+ pub fn __wasilibc_tell(fd: c_int) -> ::off_t;
--- /dev/null
+#!/usr/bin/python3
+# Copyright: 2015-2017 The Debian Project
+# License: MIT or Apache-2.0
+#
+# Helper to remove removed-files from .cargo-checksum
+# TODO: rewrite to perl and add to dh-cargo, maybe?
+
+from collections import OrderedDict
+import argparse
+import json
+import os
+import sys
+
+def prune_keep(cfile):
+ with open(cfile) as fp:
+ sums = json.load(fp, object_pairs_hook=OrderedDict)
+
+ oldfiles = sums["files"]
+ newfiles = OrderedDict([entry for entry in oldfiles.items() if os.path.exists(entry[0])])
+ sums["files"] = newfiles
+
+ if len(oldfiles) == len(newfiles):
+ return
+
+ with open(cfile, "w") as fp:
+ json.dump(sums, fp, separators=(',', ':'))
+
+def prune(cfile):
+ with open(cfile, "r+") as fp:
+ sums = json.load(fp, object_pairs_hook=OrderedDict)
+ sums["files"] = {}
+ fp.seek(0)
+ json.dump(sums, fp, separators=(',', ':'))
+ fp.truncate()
+
+if __name__ == "__main__":
+ parser = argparse.ArgumentParser()
+ parser.add_argument("-k", "--keep", action="store_true", help="keep "
+ "checksums of files that still exist, and assume they haven't changed.")
+ parser.add_argument('crates', nargs=argparse.REMAINDER,
+ help="crates whose checksums to prune. (default: ./)")
+ args = parser.parse_args(sys.argv[1:])
+ crates = args.crates or ["."]
+ f = prune_keep if args.keep else prune
+ for c in crates:
+ cfile = os.path.join(c, ".cargo-checksum.json") if os.path.isdir(c) else c
+ f(cfile)
--- /dev/null
+#!/bin/bash
+# Run this script in an unpacked upstream tarball directory, and it will update
+# (i.e. overwrite) the "unused deps" part of Files-Excluded in d/copyright.
+
+set -e
+
+scriptdir=$(dirname "$(dirname "$(readlink -f "$0")")")
+had_config_toml=$(if test -e "$scriptdir/debian/config.toml"; then echo true; else echo false; fi)
+
+( cd "$scriptdir" && debian/rules debian/config.toml )
+cp "$scriptdir/debian/config.toml" config.toml
+
+for i in "$scriptdir/debian/patches"/d-00*.patch; do
+ "$scriptdir/debian/ensure-patch" -N "$i"
+done
+test -f Cargo.lock.orig || cp Cargo.lock Cargo.lock.orig
+rm -f Cargo.lock
+./x.py build nonexistent/path/to/trigger/cargo/metadata src/bootstrap
+
+massage_lock_file() {
+ sed -z -e 's/\nname = /name = /g' -e 's/\nversion = /version = /g' "$1"
+}
+
+not_needed() {
+ diff -ru <(massage_lock_file Cargo.lock.orig) <(massage_lock_file Cargo.lock) \
+ | sed -ne 's/-\[\[package\]\]name = "\(.*\)"version = "\(.*\)"/\1 \2/gp'
+}
+
+ghetto_parse_cargo() {
+ cat "$1" \
+ | tr '\n' '\t' \
+ | sed -e 's/\t\[/\n[/g' \
+ | perl -ne 'print if s/^\[(?:package|project)\].*\tname\s*=\s*"(.*?)".*\tversion\s*=\s*"(.*?)".*/\1 \2/g'
+}
+
+pruned_paths() {
+ for i in vendor/*/Cargo.toml; do
+ pkgnamever=
+ pkgnamever=$(ghetto_parse_cargo "$i")
+ if [ -z "$pkgnamever" ]; then
+ echo >&2 "failed to parse: $i"
+ exit 1
+ fi
+ echo "$pkgnamever $i"
+ done | grep -F -f <(not_needed) | cut '-d ' -f3 | while read x; do
+ echo " $(dirname $x)"
+ done
+}
+
+header='# DO NOT EDIT below, AUTOGENERATED'
+footer='# DO NOT EDIT above, AUTOGENERATED'
+{
+echo "$header"
+pruned_paths
+echo "$footer"
+} > $scriptdir/debian/copyright.unused-deps
+
+cd $scriptdir/debian
+sed -i -e "/^$header/,/^$footer/d" -e '/^# unused dependencies/rcopyright.unused-deps' copyright
+rm copyright.unused-deps
+$had_config_toml || rm "$scriptdir/debian/config.toml"
--- /dev/null
+#!/usr/bin/make -f
+# -*- makefile -*-
+
+include /usr/share/dpkg/pkg-info.mk
+include /usr/share/dpkg/vendor.mk
+include /usr/share/dpkg/architecture.mk
+SED_VERSION_SHORT := sed -re 's/([^.]+)\.([^.]+)\..*/\1.\2/'
+RUST_VERSION := $(shell echo '$(DEB_VERSION_UPSTREAM)' | $(SED_VERSION_SHORT))
+RUST_LONG_VERSION := $(shell echo '$(DEB_VERSION_UPSTREAM)' | sed -re 's/([^+]+).*/\1/')
+LIBSTD_PKG := libstd-rust-$(RUST_VERSION)
+# Sed expression that matches the "rustc" we have in our Build-Depends field
+SED_RUSTC_BUILDDEP := sed -ne "/^Build-Depends:/,/^[^[:space:]\#]/{/^ *rustc:native .*,/p}" debian/control
+# Version of /usr/bin/rustc
+LOCAL_RUST_VERSION := $(shell rustc --version --verbose | sed -ne 's/^release: //p')
+
+include /usr/share/dpkg/buildflags.mk
+# TODO: more correct to use `[build] rustflags = []` list syntax in Cargo.toml
+RUSTFLAGS = $(addprefix -C link-args=,$(LDFLAGS))
+RUSTFLAGS += --cap-lints warn --remap-path-prefix=$(CURDIR)=/usr/src/rustc-$(RUST_LONG_VERSION)
+export CFLAGS CXXFLAGS CPPFLAGS LDFLAGS RUSTFLAGS
+export CARGO_HOME = $(CURDIR)/debian/cargo
+
+# Defines DEB_*_RUST_TYPE triples
+include debian/architecture.mk
+export DEB_HOST_RUST_TYPE
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+DEB_DESTDIR := $(CURDIR)/debian/tmp
+
+# Use system LLVM (comment out to use vendored LLVM)
+LLVM_VERSION = 9
+OLD_LLVM_VERSION = 8
+# Make it easier to test against a custom LLVM
+ifneq (,$(LLVM_DESTDIR))
+LLVM_LIBRARY_PATH := $(LLVM_DESTDIR)/usr/lib/$(DEB_HOST_MULTIARCH):$(LLVM_DESTDIR)/usr/lib
+LD_LIBRARY_PATH := $(if $(LD_LIBRARY_PATH),$(LD_LIBRARY_PATH):$(LLVM_LIBRARY_PATH),$(LLVM_LIBRARY_PATH))
+export LD_LIBRARY_PATH
+endif
+
+RUSTBUILD = RUST_BACKTRACE=1 python3 src/bootstrap/bootstrap.py
+RUSTBUILD_FLAGS = --config debian/config.toml -vvv --on-fail env
+RUSTBUILD_TEST = $(RUSTBUILD) test --no-fail-fast
+# To run a specific test, run something like:
+# $ debian/rules override_dh_auto_test-arch \
+# RUSTBUILD_TEST_FLAGS="src/test/run-make --test-args extern-fn-struct"
+# See src/bootstrap/README.md for more options.
+RUSTBUILD_TEST_FLAGS =
+
+update-version:
+ oldver=$(shell $(SED_RUSTC_BUILDDEP) | sed -ne 's/.*(<= \(.*\)).*/\1/gp' | $(SED_VERSION_SHORT)); \
+ newver=$(RUST_VERSION); \
+ debian/update-version.sh $$oldver $$newver $(RUST_LONG_VERSION) $(CARGO_NEW)
+
+# Below we detect how we're supposed to bootstrap the stage0 compiler. See
+# README.Debian for more details of the cases described below.
+#
+PRECONFIGURE_CHECK = :
+HAVE_BINARY_TARBALL := $(shell ls -1 stage0/*/*$(DEB_HOST_RUST_TYPE)* 2>/dev/null | wc -l)
+DOWNLOAD_BOOTSTRAP := false
+# allow not using the binary tarball although it exists
+#ifneq (,$(filter $(DEB_HOST_ARCH), amd64 arm64 armhf i386 powerpc ppc64el s390x))
+# HAVE_BINARY_TARBALL := 0
+#endif
+ifeq (0,$(HAVE_BINARY_TARBALL))
+ # Case A (Building from source): the extracted source tree does not include
+ # a bootstrapping tarball for the current architecture e.g. because the
+ # distro already has a rustc for this arch, or the uploader expects that
+ # this requirement be fulfilled in some other way.
+ #
+ # Case A-1: the builder did not select the "pkg.rustc.dlstage0" build profile.
+ # In this case, we use the distro's rustc - either the previous or current version.
+ ifeq (,$(findstring pkg.rustc.dlstage0,$(DEB_BUILD_PROFILES)))
+ # Make it easier to test against a custom rustc
+ ifneq (,$(RUST_DESTDIR))
+ RUST_LIBRARY_PATH := $(RUST_DESTDIR)/usr/lib/$(DEB_HOST_MULTIARCH):$(RUST_DESTDIR)/usr/lib
+ LD_LIBRARY_PATH := $(if $(LD_LIBRARY_PATH),$(LD_LIBRARY_PATH):$(RUST_LIBRARY_PATH),$(RUST_LIBRARY_PATH))
+ export LD_LIBRARY_PATH
+ endif
+ #
+ # Case A-2: the builder selected the "dlstage0" build profile.
+ # In this case, the rust build scripts will download a stage0 into stage0/ and use that.
+ # We don't need to do anything specific in this build file, so this case is empty.
+ else
+ DOWNLOAD_BOOTSTRAP := true
+ endif
+else
+ # Case B (Bootstrapping a new distro): the extracted source tree does
+ # include a bootstrapping tarball for the current architecture; see the
+ # `source_orig-stage0` target below on how to build this.
+ #
+ # In this case, we'll bootstrap from the stage0 given in that tarball.
+ # To ensure the uploader of the .dsc didn't make a mistake, we first check
+ # that rustc isn't a Build-Depends for the current architecture.
+ ifneq (,$(shell $(SED_RUSTC_BUILDDEP)))
+ ifeq (,$(shell $(SED_RUSTC_BUILDDEP) | grep '!$(DEB_HOST_ARCH)'))
+ PRECONFIGURE_CHECK = $(error found matches for stage0/*/*$(DEB_HOST_RUST_TYPE)*, \
+ but rustc might be a Build-Depends for $(DEB_HOST_ARCH))
+ endif
+ endif
+endif
+
+BUILD_DOCS := true
+ifneq (,$(findstring nodoc,$(DEB_BUILD_PROFILES)))
+ BUILD_DOCS := false
+endif
+ifneq (,$(findstring nodoc,$(DEB_BUILD_OPTIONS)))
+ BUILD_DOCS := false
+endif
+
+BUILD_WASM := true
+ifneq (,$(findstring nowasm,$(DEB_BUILD_PROFILES)))
+ BUILD_WASM := false
+endif
+
+MAKE_OPTIMISATIONS := true
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ MAKE_OPTIMISATIONS := false
+endif
+
+# Build products or non-source files in src/, that shouldn't go in rust-src
+SRC_CLEAN = src/bootstrap/bootstrap.pyc \
+ src/etc/__pycache__/
+
+# Try to work around #933045
+ifneq (,$(filter $(DEB_BUILD_ARCH), mips mipsel))
+ SYSTEM_WORKAROUNDS += export MALLOC_ARENA_MAX=1;
+endif
+
+%:
+ $(SYSTEM_WORKAROUNDS) dh $@ --parallel
+
+.PHONY: build
+build:
+ $(SYSTEM_WORKAROUNDS) dh $@ --parallel
+
+override_dh_clean:
+ # Upstream contains a lot of these
+ dh_clean -XCargo.toml.orig
+
+debian/config.toml: debian/config.toml.in debian/rules
+ u="$(DEB_VERSION_UPSTREAM)"; \
+ if [ "$$u" != "$${u%~beta.*+dfsg*}" ]; then channel="beta"; \
+ else channel="stable"; fi; echo $$channel; \
+ m4 -DRELEASE_CHANNEL="$$channel" \
+ -DDEB_BUILD_RUST_TYPE="$(DEB_BUILD_RUST_TYPE)" \
+ -DDEB_HOST_RUST_TYPE="$(DEB_HOST_RUST_TYPE)" \
+ -DDEB_TARGET_RUST_TYPE="$(DEB_TARGET_RUST_TYPE)" \
+ -DDEB_BUILD_GNU_TYPE="$(DEB_BUILD_GNU_TYPE)" \
+ -DDEB_HOST_GNU_TYPE="$(DEB_HOST_GNU_TYPE)" \
+ -DDEB_TARGET_GNU_TYPE="$(DEB_TARGET_GNU_TYPE)" \
+ -DMAKE_OPTIMISATIONS="$(MAKE_OPTIMISATIONS)" \
+ -DLLVM_DESTDIR="$(LLVM_DESTDIR)" \
+ -DLLVM_VERSION="$(LLVM_VERSION)" \
+ -DRUST_DESTDIR="$(RUST_DESTDIR)" \
+ "$<" > "$@"
+ if $(DOWNLOAD_BOOTSTRAP) || [ $(HAVE_BINARY_TARBALL) != 0 ]; \
+ then sed -i -e '/^rustc = /d' -e '/^cargo = /d' "$@"; fi
+# Work around low-memory (32-bit) architectures: https://github.com/rust-lang/rust/issues/45854
+ifneq (,$(filter $(DEB_BUILD_ARCH), armhf armel mips mipsel powerpc powerpcspe))
+ sed -i -e 's/^debuginfo-level = .*/debuginfo-level = 0/g' "$@"
+endif
+
+debian/rust-src.%: debian/rust-src.%.in
+ m4 -DRUST_LONG_VERSION="$(RUST_LONG_VERSION)" \
+ "$<" > "$@"
+
+debian/dh_auto_configure.stamp: debian/config.toml
+ # fail the build if we have any instances of OLD_LLVM_VERSION in debian, except for debian/changelog
+ ! grep --color=always -i 'll\(..\|d\)-\?$(subst .,\.,$(OLD_LLVM_VERSION))' --exclude=changelog --exclude='*.patch' --exclude-dir='.debhelper' -R debian
+ # fail the build if we accidentally vendored openssl, indicates we pulled in unnecessary dependencies
+ test ! -e vendor/openssl
+ # fail the build if we didn't update d-ignore-error-detail-diff.patch
+ ! grep -Ri '\$$SRC_DIR' src/test/
+ # fail the build if our version contains ~exp and we are not releasing to experimental
+ v="$(DEB_VERSION)"; test "$$v" = "$${v%~exp*}" -o "$(DEB_DISTRIBUTION)" = "experimental" -o "$(DEB_DISTRIBUTION)" = "UNRELEASED"
+ $(PRECONFIGURE_CHECK)
+ if [ -d stage0 ]; then mkdir -p build && ln -sfT ../stage0 build/cache; fi
+ # work around #842634
+ if test $$(grep "127.0.0.1\s*localhost" /etc/hosts | wc -l) -gt 1; then \
+ debian/ensure-patch -N debian/patches/d-host-duplicates.patch; fi
+ # work around https://github.com/rust-lang/rust/issues/59264
+ # We patched some crates so have to rm the checksums
+ find vendor -name .cargo-checksum.json -execdir "$(CURDIR)/debian/prune-checksums" "{}" +
+ # Link against system liblzma, see https://github.com/alexcrichton/xz2-rs/issues/16
+ echo 'fn main() { println!("cargo:rustc-link-lib=lzma"); }' > vendor/lzma-sys/build.rs
+ # We don't run ./configure because we use debian/config.toml directly
+ ln -sf debian/config.toml config.toml
+ touch "$@"
+
+override_dh_auto_configure-arch: debian/dh_auto_configure.stamp
+override_dh_auto_configure-indep: debian/dh_auto_configure.stamp
+ifeq (true,$(BUILD_DOCS))
+# Change config.toml now and not later, since that might trigger a rebuild
+ sed -i -e 's/^docs = false/docs = true/' debian/config.toml
+endif
+
+override_dh_auto_clean:
+ $(RM) -rf build tmp .cargo debian/cargo_home config.stamp config.mk Makefile
+ $(RM) -rf $(TEST_LOG) debian/config.toml debian/rust-src.install debian/rust-src.links debian/*.stamp
+ $(RM) -rf $(SRC_CLEAN) config.toml
+
+debian/dh_auto_build.stamp:
+ $(RUSTBUILD) build $(RUSTBUILD_FLAGS)
+
+override_dh_auto_build-arch: debian/dh_auto_build.stamp
+override_dh_auto_build-indep: debian/dh_auto_build.stamp
+ifeq (true,$(BUILD_WASM))
+ $(RUSTBUILD) build $(RUSTBUILD_FLAGS) \
+ --host $(DEB_BUILD_RUST_TYPE) \
+ --target wasm32-unknown-unknown,wasm32-wasi \
+ src/libstd
+endif
+ifeq (true,$(BUILD_DOCS))
+ $(RUSTBUILD) doc $(RUSTBUILD_FLAGS)
+endif
+
+TEST_LOG = debian/rustc-tests.log
+# This is advertised as "5 tests failed" in README.Debian because our counting
+# method is imprecise and in practise we count some failures twice.
+FAILURES_ALLOWED = 8
+ifneq (,$(filter $(DEB_BUILD_ARCH), ppc64 arm64 mips64el i386))
+ FAILURES_ALLOWED = 12
+endif
+ifneq (,$(filter $(DEB_BUILD_ARCH), mips mipsel s390x))
+ FAILURES_ALLOWED = 24
+endif
+ifneq (,$(filter $(DEB_BUILD_ARCH), powerpc powerpcspe riscv64 sparc64 x32))
+ FAILURES_ALLOWED = 180
+endif
+FAILED_TESTS = grep "FAILED\|^command did not execute successfully" $(TEST_LOG) | grep -v '^test result: FAILED'
+override_dh_auto_test-arch:
+ # ensure that rustc_llvm is actually dynamically linked to libLLVM
+ set -e; find build/*/stage2/lib/rustlib/* -name '*rustc_llvm*.so' | \
+ while read x; do \
+ stat -c '%s %n' "$$x"; \
+ objdump -p "$$x" | grep -q "NEEDED.*LLVM"; \
+ test "$$(stat -c %s "$$x")" -lt 6000000; \
+ done
+ifeq (, $(filter nocheck,$(DEB_BUILD_PROFILES)))
+ifeq (, $(filter nocheck,$(DEB_BUILD_OPTIONS)))
+ { $(RUSTBUILD_TEST) $(RUSTBUILD_FLAGS) $(RUSTBUILD_TEST_FLAGS); echo $$?; } | tee -a $(TEST_LOG)
+ # test that the log has at least 1 pass, to prevent e.g. #57709
+ grep -l "^test .* \.\.\. ok$$" $(TEST_LOG)
+ echo "==== Debian rustc test report ===="; \
+ echo "Specific test failures:"; \
+ $(FAILED_TESTS); \
+ num_failures=$$($(FAILED_TESTS) | wc -l); \
+ exit_code=$$(tail -n1 $(TEST_LOG)); \
+ echo "Summary: exit code $$exit_code, counted $$num_failures tests failed."; \
+ echo -n "$(FAILURES_ALLOWED) maximum allowed. "; \
+ if test "$$num_failures" -eq 0 -a "$$exit_code" -ne 0; then \
+ echo "Aborting just in case, because we missed counting some test failures."; \
+ echo "This could happen if we failed to build the tests, or if the testsuite runner is buggy."; \
+ false; \
+ elif test "$$num_failures" -le $(FAILURES_ALLOWED); then \
+ echo "Continuing..."; \
+ else \
+ echo "Aborting the build."; \
+ echo "Check the logs further above for details."; \
+ false; \
+ fi
+# don't continue if RUSTBUILD_TEST_FLAGS is non-empty
+ test -z "$(RUSTBUILD_TEST_FLAGS)"
+endif
+endif
+
+override_dh_auto_test-indep:
+ifeq (, $(filter nocheck,$(DEB_BUILD_PROFILES)))
+ifeq (, $(filter nocheck,$(DEB_BUILD_OPTIONS)))
+ifeq (true,$(BUILD_WASM))
+ # Ignore failures in these tests, but run them so we see what it's like
+ -PATH=$(CURDIR)/debian/bin:$(PATH) $(RUSTBUILD_TEST) $(RUSTBUILD_FLAGS) $(RUSTBUILD_TEST_FLAGS) \
+ --host $(DEB_BUILD_RUST_TYPE) \
+ --target wasm32-unknown-unknown,wasm32-wasi \
+ src/libstd
+endif
+ifeq (true,$(BUILD_DOCS))
+ # Run all rules that test the docs, i.e. that depend on default:doc
+ $(RUSTBUILD_TEST) $(RUSTBUILD_FLAGS) src/tools/linkchecker
+endif
+ test -z "$(RUSTBUILD_TEST_FLAGS)"
+endif
+endif
+
+run_rustbuild:
+ DESTDIR=$(DEB_DESTDIR) $(RUSTBUILD) $(X_CMD) $(RUSTBUILD_FLAGS) $(X_FLAGS)
+
+debian/dh_auto_install.stamp:
+ DESTDIR=$(DEB_DESTDIR) $(RUSTBUILD) install $(RUSTBUILD_FLAGS)
+
+ mkdir -p $(DEB_DESTDIR)/usr/lib/$(DEB_HOST_MULTIARCH)/
+ mv $(DEB_DESTDIR)/usr/lib/lib*.so $(DEB_DESTDIR)/usr/lib/$(DEB_HOST_MULTIARCH)/
+
+ # Replace duplicated compile-time/run-time dylibs with symlinks
+ @set -e; \
+ for f in $(DEB_DESTDIR)/usr/lib/rustlib/$(DEB_HOST_RUST_TYPE)/lib/lib*.so; do \
+ name=$${f##*/}; \
+ if [ -f "$(DEB_DESTDIR)/usr/lib/$(DEB_HOST_MULTIARCH)/$$name" ]; then \
+ echo "ln -sf ../../../$(DEB_HOST_MULTIARCH)/$$name $$f"; \
+ ln -sf ../../../$(DEB_HOST_MULTIARCH)/$$name $$f; \
+ fi; \
+ done
+
+ touch "$@"
+
+override_dh_auto_install-arch: debian/dh_auto_install.stamp
+override_dh_auto_install-indep: debian/dh_auto_install.stamp
+ifeq (true,$(BUILD_WASM))
+ DESTDIR=$(DEB_DESTDIR) $(RUSTBUILD) install $(RUSTBUILD_FLAGS) \
+ --host $(DEB_BUILD_RUST_TYPE) \
+ --target wasm32-unknown-unknown,wasm32-wasi \
+ src/libstd
+endif
+ifeq (true,$(BUILD_DOCS))
+ # Brute force to remove privacy-breach-logo lintian warning.
+ # We could have updated the upstream sources but it would complexify
+ # the rebase
+ @set -e; \
+ find $(DEB_DESTDIR)/usr/share/doc/*/html -iname '*.html' | \
+ while read file; do \
+ topdir=$$(echo "$$file" | sed 's,^$(DEB_DESTDIR)/usr/share/doc/rust/html/,,; s,/[^/]*$$,/,; s,^[^/]*$$,,; s,[^/]\+/,../,g'); \
+ sed -i \
+ -e "s,https://\(doc\|www\).rust-lang.org/\(favicon.ico\|logos/rust-logo-32x32-blk.png\),$${topdir}rust-logo-32x32-blk.png," \
+ -e 's,<img src="https://img.shields.io/[^"]*" alt="\([^"]*\)" />,<span class="deb-privacy-replace--shields-io">\1</span>,g' "$$file"; \
+ done
+ find $(DEB_DESTDIR) \( -iname '*.html' -empty -o -name .lock -o -name '*.inc' \) -delete;
+endif
+
+override_dh_install-arch:
+ dh_install
+ dh_install -p$(LIBSTD_PKG) usr/lib/$(DEB_HOST_MULTIARCH)/
+ dh_install -plibstd-rust-dev usr/lib/rustlib/$(DEB_HOST_RUST_TYPE)/lib/
+
+override_dh_install-indep: debian/rust-src.install debian/rust-src.links
+ dh_install
+ifeq (true,$(BUILD_WASM))
+ dh_install -plibstd-rust-dev-wasm32-cross usr/lib/rustlib/wasm32-*/lib/
+endif
+ chmod -x \
+ debian/rust-gdb/usr/share/rust-gdb/*.py \
+ debian/rust-lldb/usr/share/rust-lldb/*.py
+ $(RM) -rf $(SRC_CLEAN:%=debian/rust-src/usr/src/rustc-$(RUST_LONG_VERSION)/%)
+ # Get rid of lintian warnings
+ find debian/rust-src/usr/src/rustc-$(RUST_LONG_VERSION) \
+ \( -name .gitignore \
+ -o -name 'LICENSE*' \
+ -o -name 'LICENCE' \
+ -o -name 'license' \
+ -o -name 'COPYING*' \
+ \) -delete
+ # Remove files that autoload remote resources, caught by lintian
+ $(RM) -rf debian/rust-src/usr/src/rustc-*/vendor/cssparser/docs/*.html
+ $(RM) -rf debian/rust-src/usr/src/rustc-*/vendor/kuchiki/docs/*.html
+ $(RM) -rf debian/rust-src/usr/src/rustc-*/vendor/url/docs/*.html
+ $(RM) -rf debian/rust-src/usr/src/rustc-*/vendor/xz2/.gitmodules
+
+override_dh_installchangelogs:
+ dh_installchangelogs RELEASES.md
+
+override_dh_installdocs:
+ dh_installdocs -X.tex -X.aux -X.log -X.out -X.toc
+
+override_dh_missing:
+ dh_missing --list-missing
+
+override_dh_compress:
+ dh_compress -X.woff
+
+# The below override is disabled on advice from #debian-devel, because:
+# - only shared libs get the "split dbgsym package" treatment by dh_strip;
+# static libs simply get their debuginfo discarded
+# - strip(1) sometimes breaks wasm libs
+#
+#override_dh_strip:
+# # Work around #35733, #468333
+# find debian/libstd-rust-dev*/ -name '*.rlib' -execdir mv '{}' '{}.a' \;
+# # This is expected to print out lots of "File format unrecognized" warnings about
+# # rust.metadata.bin and *.deflate but the .o files inside the rlibs should be stripped
+# # Some files are still omitted because of #875780 however.
+# dh_strip -v
+# find debian/libstd-rust-dev*/ -name '*.rlib.a' -execdir sh -c 'mv "$$1" "$${1%.a}"' - '{}' \;
+
+override_dh_dwz:
+ # otherwise rustc gets an empty multifile which lintian errors on, causing
+ # FTP auto-reject. this is a work-around, the lintian bug is #955752
+ dh_dwz --no-dwz-multifile
+
+override_dh_makeshlibs:
+ dh_makeshlibs -V
+
+ # dh_makeshlibs doesn't support our "libfoo-version.so" naming
+ # structure, so we have to do this ourselves.
+ install -o 0 -g 0 -d debian/$(LIBSTD_PKG)/DEBIAN
+ LC_ALL=C ls debian/$(LIBSTD_PKG)/usr/lib/$(DEB_HOST_MULTIARCH)/lib*.so | \
+ sed -n 's,^.*/\(lib.*\)-\(.\+\)\.so$$,\1 \2,p' | \
+ while read name version; do \
+ echo "$$name $$version $(LIBSTD_PKG) (>= $(DEB_VERSION_UPSTREAM))"; \
+ done > debian/$(LIBSTD_PKG)/DEBIAN/shlibs
+ chmod 644 debian/$(LIBSTD_PKG)/DEBIAN/shlibs
+ chown 0:0 debian/$(LIBSTD_PKG)/DEBIAN/shlibs
+
+override_dh_shlibdeps:
+ dh_shlibdeps -- -x$(LIBSTD_PKG)
+
+QUILT_SPECIAL_SNOWFLAKE_RETURN_CODE = x=$$?; if [ $$x = 2 ]; then exit 0; else exit $$x; fi
+source_orig-stage0:
+ QUILT_PATCHES=debian/patches quilt push -aq; $(QUILT_SPECIAL_SNOWFLAKE_RETURN_CODE)
+ $(MAKE) -f debian/rules clean
+ debian/make_orig-stage0_tarball.sh
+ QUILT_PATCHES=debian/patches quilt pop -aq; $(QUILT_SPECIAL_SNOWFLAKE_RETURN_CODE)
+ rm -rf .pc
+
+get_beta_version = \
+ u="$(DEB_VERSION_UPSTREAM)"; \
+ if [ "$$u" != "$${u%~beta.*+dfsg*}" ]; then \
+ newver=$(shell echo $(RUST_VERSION) | perl -lpe 's/(\d+)\.(\d+)/$$1 . "." . ($$2)/e'); \
+ else \
+ newver=$(shell echo $(RUST_VERSION) | perl -lpe 's/(\d+)\.(\d+)/$$1 . "." . ($$2+1)/e'); \
+ fi
+
+debian/watch-beta: debian/watch-beta.in debian/rules
+ set -e; $(get_beta_version); \
+ m4 -DOLDVER="$$oldver" -DNEWVER="$$newver.0" "$<" > "$@"
+
+source_orig-beta: debian/watch-beta
+ uscan $(USCAN_OPTS) $(if $(USCAN_DESTDIR),--destdir=$(USCAN_DESTDIR),) --verbose --watchfile "$<"
+ set -e; $(get_beta_version); \
+ bd="$(if $(USCAN_DESTDIR),$(USCAN_DESTDIR),..)"; \
+ tar xf $$bd/rustc-$$newver.0-beta.999-src.tar.xz rustc-beta-src/version; \
+ bv="$$(sed -re 's/[0-9]+.[0-9]+.[0-9]+-beta.([0-9]+) \(.*\)/\1/g' rustc-beta-src/version)"; \
+ bash -c 'shopt -s nullglob; for i in '"$$bd"'/rustc*beta.999*; do mv $$i $${i/beta.999/beta.'"$$bv"'}; done'; \
+ rm -f rustc-beta-src/version; \
+ rmdir -p rustc-beta-src; \
+ echo "prepared rustc $$newver.0~beta.$$bv in $$bd"
--- /dev/null
+Document: rust-book
+Title: The Rust Programming Language
+Section: Programming/Rust
+Abstract:
+ This book will teach you about the Rust Programming Language. Rust is
+ a modern systems programming language focusing on safety and speed. It
+ accomplishes these goals by being memory safe without using garbage
+ collection.
+
+Format: HTML
+Index: /usr/share/doc/rust-doc/html/book/index.html
+Files: /usr/share/doc/rust-doc/html/book/*.html
+ /usr/share/doc/rust-doc/html/book/*/*.html
--- /dev/null
+Document: rust-reference
+Title: The Rust Reference
+Section: Programming/Rust
+Abstract:
+ This document is the primary reference for the Rust programming
+ language.
+
+Format: HTML
+Index: /usr/share/doc/rust-doc/html/reference/index.html
+Files: /usr/share/doc/rust-doc/html/reference/*.html
+ /usr/share/doc/rust-doc/html/reference/*/*.html
--- /dev/null
+debian/tmp/usr/share/doc/rust/html
--- /dev/null
+debian/icons/rust-logo-32x32-blk.png usr/share/doc/rust-doc/html/
--- /dev/null
+# This should eventually become part of a dh_rustdoc program.
+# Something that does e.g.
+# find $(DESTDIR) -name jquery.js -execdir ln -sf -T \
+# /usr/share/doc/rust-doc/html/jquery.js '{}' \;
+usr/share/javascript/jquery/jquery.min.js usr/share/doc/rust-doc/html/jquery.min.js
+usr/share/javascript/mathjax usr/share/doc/rust-doc/html/mathjax
+usr/share/javascript/highlight.js/styles/atelier-dune-light.css usr/share/doc/rust-doc/html/highlight.css
+usr/share/javascript/highlight.js/highlight.js usr/share/doc/rust-doc/html/highlight.js
+usr/share/fonts-font-awesome/css/font-awesome.min.css usr/share/doc/rust-doc/html/font-awesome.min.css
+usr/share/fonts-font-awesome/fonts usr/share/doc/rust-doc/fonts
--- /dev/null
+src/etc/rust-gdb usr/bin/
+src/etc/gdb_*.py usr/share/rust-gdb/
+src/etc/debugger_pretty_printers_common.py usr/share/rust-gdb/
--- /dev/null
+usr/share/man/man1/gdb.1.gz usr/share/man/man1/rust-gdb.1.gz
--- /dev/null
+src/etc/rust-lldb usr/bin/
+src/etc/lldb_rust_formatters.py usr/share/rust-lldb/
+src/etc/debugger_pretty_printers_common.py usr/share/rust-lldb/
--- /dev/null
+usr/share/man/man1/lldb-9.1.gz usr/share/man/man1/rust-lldb.1.gz
--- /dev/null
+debian/patches usr/src/rustc-RUST_LONG_VERSION/debian
+# from src/bootstrap/dist.rs:370 onwards
+COPYRIGHT usr/src/rustc-RUST_LONG_VERSION
+LICENSE-APACHE usr/src/rustc-RUST_LONG_VERSION
+LICENSE-MIT usr/src/rustc-RUST_LONG_VERSION
+CONTRIBUTING.md usr/src/rustc-RUST_LONG_VERSION
+README.md usr/src/rustc-RUST_LONG_VERSION
+RELEASES.md usr/src/rustc-RUST_LONG_VERSION
+configure usr/src/rustc-RUST_LONG_VERSION
+x.py usr/src/rustc-RUST_LONG_VERSION
+config.toml.example usr/src/rustc-RUST_LONG_VERSION
+Cargo.toml usr/src/rustc-RUST_LONG_VERSION
+src usr/src/rustc-RUST_LONG_VERSION
--- /dev/null
+usr/src/rustc-RUST_LONG_VERSION usr/lib/rustlib/src/rust
--- /dev/null
+# False positives that change quite often, so just override with a wildcard
+rust-src binary: executable-not-elf-or-script usr/src/rustc-*/*
+rust-src binary: privacy-breach-generic usr/src/rustc-*/*
+rust-src binary: package-contains-eslint-config-file usr/src/rustc-*/src/librustdoc/html/static/.eslintrc.js
--- /dev/null
+usr/bin/rustc
+usr/bin/rustdoc
+debian/architecture.mk usr/share/rustc/
--- /dev/null
+usr/bin/lld-9 usr/bin/rust-lld
--- /dev/null
+debian/tmp/usr/share/man/man1/rustc.1
+debian/tmp/usr/share/man/man1/rustdoc.1
+
--- /dev/null
+3.0 (quilt)
--- /dev/null
+debian/icons/rust-logo-32x32-blk.png
+# if you are here because dpkg-source told you to "add stage0/rustc-** in d/source/include-binaries",
+# ignore that instruction and instead:
+# a) if you want to use the orig-stage0 for your next upload, then extract it into stage0/
+# b) if you don't want to use it, then rename "../rustc_${version}.orig-stage0.tar.xz" to something else
+# see also d/source/options and d/source/local-options and #577113.
--- /dev/null
+# Long documentation
+rustc source: source-is-missing src/stdarch/crates/stdarch-verify/arm-intrinsics.html line length is * characters (>*)
+# Test data
+rustc source: source-is-missing vendor/minifier/tests/files/minified_main.js line length is * characters (>*)
+# Lintian out-of-date
+rustc source: invalid-profile-name-in-build-profiles-field nowasm *
+rustc source: invalid-profile-name-in-source-relation nowasm *
--- /dev/null
+# this helps to prevent accidentally including the orig-stage0 tarball in a non
+# orig-stage0 upload, after running `debian/rules source_orig-stage0`.
+# we can get rid of this after #577113 is fixed
+include-removal
--- /dev/null
+#!/bin/bash
+# Don't run this directly, use "debian/rules update-version" instead
+
+prev_stable() {
+local V=$1
+python3 -c 'import sys; k=list(map(int,sys.argv[1].split("."))); k[1]-=1; print(".".join(map(str,k)))' "$V"
+}
+
+cargo_new() {
+local V=$1
+python3 -c 'import sys; k=list(map(int,sys.argv[1].split("."))); k[1]+='"${2:-1}"'; k[0]-=1; print(".".join(map(str,k)))' "$V"
+}
+
+update() {
+local ORIG=$1 NEW=$2 NEW_LONG=$3
+local CARGO_NEW=${4:-$(cargo_new $NEW)}
+local CARGO_NEXT=${4:-$(cargo_new $NEW 2)}
+
+ORIG_M1=$(prev_stable $ORIG)
+NEW_M1=$(prev_stable $NEW)
+ORIG_R="${ORIG/./\\.}" # match a literal dot, otherwise this might sometimes match e.g. debhelper (>= 9.20141010)
+
+WASI_CI="$(grep -Rl "git clone https://github.com/CraneStation/wasi-libc" ../src/ci | head -n1)"
+WASI_COMMIT="$(egrep -o '\b[0-9A-Fa-f]{7}' "$WASI_CI")"
+WASI_REGEX='wasi-libc \(([><=]+) 0.0~git([0-9]+).([0-9a-f]+)([~+]+)\)'
+
+if [ -z "$WASI_COMMIT" -o "$(printf '%s\n' "$WASI_COMMIT" | wc -l)" != 1 ]; then
+ echo >&2 "error: could not determine unique WASI_COMMIT ($WASI_COMMIT), please figure it out from src/ci and update my logic"
+ exit 1
+fi
+
+WASI_COMMIT_OLD="$(sed -nre 's|.*'"${WASI_REGEX}"'.*|\3|gp' control | sort -u)"
+if [ -z "$WASI_COMMIT_OLD" -o "$(printf '%s\n' "$WASI_COMMIT_OLD" | wc -l)" != 1 ]; then
+ echo >&2 "error: could not determine unique WASI_COMMIT_OLD ($WASI_COMMIT_OLD), please figure it out from debian/control and update my logic"
+ exit 1
+fi
+
+sed -i -e "s|libstd-rust-${ORIG_R}|libstd-rust-$NEW|g" \
+ -e "s|rustc:native\( *\)(<= [^)]*)|rustc:native\1(<= $NEW_LONG++)|g" \
+ -e "s|rustc:native\( *\)(>= ${ORIG_M1/./\\.}|rustc:native\1(>= ${NEW_M1}|g" \
+ -e "s|cargo\( *\)(>= [^)]*)|cargo\1(>= ${CARGO_NEW}.0~~)|g" \
+ -e "s|cargo\( *\)(<< [^)]*)|cargo\1(<< ${CARGO_NEXT}.0~~)|g" \
+ control
+
+if [ "$WASI_COMMIT" != "$WASI_COMMIT_OLD" ]; then
+ sed -ri -e 's|'"${WASI_REGEX}"'|wasi-libc (\1 0.0~gitFIXME.'"${WASI_COMMIT}"'\4)|g' control
+ echo >&2 "note: the version of the wasi-libc Build-Depends has changed and needs to be FIXME with the correct date"
+ echo >&2 "please update that package, upload it to experimental, and supply the correct date in debian/control"
+fi
+
+if [ "$NEW" != "$ORIG" ]; then
+git mv libstd-rust-$ORIG.lintian-overrides libstd-rust-$NEW.lintian-overrides
+fi
+sed -i -e "s|libstd-rust-${ORIG_R}|libstd-rust-$NEW|g" libstd-rust-$NEW.lintian-overrides
+}
+
+cd $(dirname "$0")
+update "$@"
--- /dev/null
+## In this file we list false-positives of the check-orig-suspicious.sh script
+# so that they can be ignored. You should manually audit all of the files here
+# to confirm that they adhere to Debian Policy and the DFSG. In particular, if
+# you are blindly adding files here just to get the build to work, you are
+# probably Doing It Wrong. Ask in #debian-rust or the mailing list for pointers.
+
+# False-positive, very small so suspicious-source thinks "octet-stream"
+src/test/run-pass/raw-str.rs
+
+# False-positive, file(1) misidentifies mime type
+src/ci/docker/*/patches/glibc/*/*.patch
+vendor/itertools*/examples/iris.data
+vendor/regex/tests/unicode.rs
+
+# False-positive, "verylongtext" but OK
+CONTRIBUTING.md
+src/doc/book/first-edition/src/the-stack-and-the-heap.md
+src/doc/book/*/tools/docx-to-md.xsl
+src/doc/embedded-book/src/*/*.md
+src/doc/rust-by-example/src/flow_control/if_let.md
+src/doc/rust-by-example/src/trait/dyn.md
+src/doc/rustc/src/lints/groups.md
+src/doc/rustc/src/targets/known-issues.md
+src/doc/rustc-dev-guide/.travis.yml
+src/doc/rustc-dev-guide/src/*.md
+src/doc/rustc-dev-guide/src/*/*.md
+src/doc/*/CODE_OF_CONDUCT.md
+src/doc/unstable-book/src/*/*.md
+src/etc/third-party/README.txt
+src/librustc_codegen_ssa/README.md
+src/libstd/sys/cloudabi/abi/cloudabi.rs
+src/libstd/os/raw/*.md
+src/libstd/sys/sgx/abi/entry.S
+vendor/*/.travis.yml
+vendor/*/Cargo.toml
+vendor/*/CHANGELOG.md
+vendor/*/CODE_OF_CONDUCT.md
+vendor/*/CONTRIBUTORS.md
+vendor/*/README.md
+vendor/*/README.tpl
+vendor/*/LICENSE
+vendor/*/*/LICENSE
+vendor/*/*/*/LICENSE
+vendor/ammonia/src/lib.rs
+vendor/clap/.github/CONTRIBUTING.md
+vendor/clap/SPONSORS.md
+# ^ author likes to omit line breaks in their comments
+vendor/failure/book/src/bail-and-ensure.md
+# ^ same with this one
+vendor/handlebars/src/lib.rs
+vendor/maplit/README.rst
+vendor/lazy_static/src/lib.rs
+vendor/pulldown-cmark/tests/suite/footnotes.rs
+vendor/pulldown-cmark/third_party/xi-editor/crdt.md
+vendor/pulldown-cmark/specs/footnotes.txt
+vendor/pulldown-cmark-*/tests/suite/footnotes.rs
+vendor/pulldown-cmark-*/third_party/xi-editor/crdt.md
+vendor/pulldown-cmark-*/specs/footnotes.txt
+vendor/rustc-demangle/src/legacy.rs
+vendor/stable_deref_trait/src/lib.rs
+vendor/unicase/src/lib.rs
+vendor/winapi-*/src/winnt.rs
+vendor/winapi/src/lib.rs
+
+# False-positive, audit-vendor-source automatically flags JS/C files
+# The below ones are OK since they're actually part of rust's own source code
+# and are not "embedded libraries".
+src/ci/docker/scripts/qemu-bare-bones-addentropy.c
+src/doc/book/*/ferris.js
+src/doc/book/ferris.js
+src/etc/wasm32-shim.js
+src/grammar/parser-lalr-main.c
+src/librustdoc/html/static/*.js
+src/librustdoc/html/static/.eslintrc.js
+src/test/auxiliary/rust_test_helpers.c
+src/test/run-make/wasm-*/*.js
+src/test/run-make-fulldeps/*.c
+src/test/run-make-fulldeps/*/*.c
+src/test/rustdoc-js/*.js
+src/test/rustdoc-js-std/*.js
+src/tools/rustdoc-js/tester.js
+src/tools/rustdoc-js-std/tester.js
+
+# Embedded libraries, justified in README.source
+vendor/backtrace-sys/src/libbacktrace/configure
+vendor/backtrace-sys/src/libbacktrace/config/libtool.m4
+vendor/backtrace-sys/src/libbacktrace/*.c
+vendor/backtrace-sys/src/android-api.c
+vendor/compiler_builtins/compiler-rt/lib/BlocksRuntime/*.c
+vendor/compiler_builtins/compiler-rt/lib/builtins/*.c
+vendor/compiler_builtins/compiler-rt/lib/builtins/*/*.c
+vendor/compiler_builtins/compiler-rt/utils/generate_*.awk
+vendor/dlmalloc/src/dlmalloc.c
+vendor/mdbook/src/theme/book.js
+vendor/mdbook/src/theme/searcher/searcher.js
+vendor/walkdir/compare/nftw.c
+vendor/walkdir-*/compare/nftw.c
+
+# False-positive, misc
+src/doc/rustc-dev-guide/src/queries/example-0.counts.txt
+src/stdarch/.travis.yml
+src/stdarch/crates/core_arch/foo.wasm
+src/test/run-make-fulldeps/target-specs/*.json
+src/test/run-make-fulldeps/libtest-json/output.json
+vendor/clap/.mention-bot
+vendor/cloudabi/cloudabi.rs
+vendor/elasticlunr-rs/src/lang/*.rs
+vendor/markup5ever/data/entities.json
+vendor/num/ci/deploy.enc
+vendor/term-0*/scripts/id_rsa.enc
+
+# False-positive, hand-editable small image
+src/etc/installer/gfx/
+src/doc/embedded-book/src/assets/*.svg
+src/doc/embedded-book/src/assets/f3.jpg
+src/doc/embedded-book/src/assets/nrf52-memory-map.png
+src/doc/embedded-book/src/assets/nrf52-spi-frequency-register.png
+src/doc/embedded-book/src/assets/verify.jpeg
+src/doc/nomicon/src/img/safeandunsafe.svg
+src/doc/book/second-edition/src/img/*.png
+src/doc/book/second-edition/src/img/*.svg
+src/doc/book/src/img/ferris/*.svg
+src/doc/book/src/img/*.png
+src/doc/book/src/img/*.svg
+src/doc/book/2018-edition/src/img/ferris/*.svg
+src/doc/book/2018-edition/src/img/*.svg
+src/doc/book/2018-edition/src/img/*.png
+src/doc/book/tools/docx-to-md.xsl
+src/doc/rustc-dev-guide/src/img/rustc_stages.svg
+src/doc/rustc-dev-guide/src/queries/example-0.png
+src/librustdoc/html/static/*.svg
+src/librustdoc/html/static/rust-logo.png
+src/librustdoc/html/static/favicon.ico
+vendor/difference/assets/*.png
+vendor/fortanix-sgx-abi/images/enclave-execution-lifecycle.png
+vendor/heck/no_step_on_snek.png
+vendor/mdbook/src/theme/favicon.png
+vendor/num/doc/favicon.ico
+vendor/num/doc/rust-logo-128x128-blk-v2.png
+vendor/pest/pest-logo.svg
+vendor/pretty_assertions/examples/*.png
+vendor/termion/logo.svg
+
+# Example code
+vendor/html5ever/examples/capi/tokenize.c
+
+# Test data
+src/stdarch/ci/gba.json
+src/stdarch/crates/stdarch-verify/arm-intrinsics.html
+src/stdarch/crates/stdarch-verify/x86-intel.xml
+src/stdarch/crates/std_detect/src/detect/test_data/*.auxv
+src/test/compile-fail/not-utf8.bin
+src/test/*/*.rs
+src/test/*/issues/*.rs
+src/test/*/*/issue-*.rs
+src/test/*/*/issues/*.rs
+src/test/*/*.stderr
+src/test/*/*/*.json
+src/test/*/*/*.stderr
+src/test/*/*/*.stdout
+src/test/*/*/*/*.stderr
+src/test/ui/terminal-width/non-whitespace-trimming*.rs
+src/tools/*/tests/*/*.stderr
+vendor/bstr/src/unicode/data/*Test.txt
+vendor/cssparser/src/css-parsing-tests/*.json
+vendor/cssparser/src/big-data-url.css
+vendor/elasticlunr-rs/tests/data/tr.in.txt
+vendor/flate2/tests/*.gz
+vendor/idna/tests/IdnaTest.txt
+vendor/idna/tests/punycode_tests.json
+vendor/idna-0*/tests/IdnaTest.txt
+vendor/idna-0*/tests/punycode_tests.json
+vendor/itertools/examples/iris.data
+vendor/html5ever/data/bench/*.html
+vendor/html5ever/html5lib-tests/*/*.dat
+vendor/html5ever/html5lib-tests/*/*.test
+vendor/libz-sys/src/smoke.c
+vendor/mdbook/src/theme/searcher/searcher.js
+vendor/mdbook/tests/searchindex_fixture.json
+vendor/minifier/tests/files/test.json
+vendor/minifier/tests/files/main.js
+vendor/minifier/tests/files/minified_main.js
+vendor/pest/benches/data.json
+vendor/pretty_assertions/src/format_changeset.rs
+vendor/regex/src/testdata/basic.dat
+vendor/regex/tests/crates_regex.rs
+vendor/regex/tests/fowler.rs
+vendor/regex-0*/src/testdata/basic.dat
+vendor/regex-0*/tests/fowler.rs
+vendor/rustc-demangle/src/lib.rs
+vendor/sha-1/tests/data/*.output.bin
+vendor/tar/tests/archives/*.tar
+vendor/term-0*/tests/data/*
+vendor/toml/tests/*/*.toml
+vendor/toml/tests/*/*.json
+vendor/unicode-segmentation/src/testdata.rs
+vendor/url/tests/*.json
+vendor/url-1*/tests/*.json
+vendor/yaml-rust/tests/specexamples.rs.inc
+vendor/ucd-parse/src/sentence_break.rs
+
+# Compromise, ideally we'd autogenerate these
+# Should already by documented in debian/copyright
+src/doc/rustc-dev-guide/src/mir/mir_*.svg
+src/librustdoc/html/static/normalize.css
+vendor/pest_meta/src/grammar.rs
+vendor/unicode-normalization/src/tables.rs
+vendor/unicode-script/src/tables.rs
+vendor/unicode-segmentation/src/tables.rs
+
+# Compromise, ideally we'd package these in their own package
+src/librustdoc/html/static/*.woff
+
+# Compromise, ideally we'd autogenerate these
+vendor/bstr/src/unicode/fsm/*.dfa
--- /dev/null
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1
+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+=5FXw
+-----END PGP PUBLIC KEY BLOCK-----
--- /dev/null
+version=4
+# if you need to download other versions replace the URL below with this one:
+# https://static.rust-lang.org/dist/index.html
+# it's a bit slower to download, that's why we use the other one normally
+
+opts="\
+pgpsigurlmangle=s/$/.asc/,\
+uversionmangle=s/(\d)[_.+-]?((beta|alpha)\.?\d*)$/$1~$2/,\
+dversionmangle=s/\+dfsg\d*$//,\
+downloadurlmangle=s/\.[gx]z/.xz/,\
+filenamemangle=s/.*\/(.*)\.[gx]z(\..*)?/$1.xz$2/,\
+repack,\
+repacksuffix=+dfsg1,\
+compression=xz,\
+" \
+ https://forge.rust-lang.org/infra/other-installation-methods.html \
+ (?:.*/)rustc?-(\d[\d.]*(?:-[\w.]+)?)-src\.tar\.[gx]z
--- /dev/null
+version=4
+# if you need to download other versions replace the URL below with this one:
+# https://static.rust-lang.org/dist/index.html
+# it's a bit slower to download, that's why we use the other one normally
+
+opts="\
+pgpsigurlmangle=s/$/.asc/,\
+uversionmangle=s/.*/NEWVER~beta.999/,\
+dversionmangle=s/\+dfsg\d*$//,\
+downloadurlmangle=s/rustc-.*-(.*)\.[gx]z/rustc-beta-$1.xz/,\
+filenamemangle=s/.*\/(.*)-[^-]*-(.*)\.[gx]z(\..*)?/$1-NEWVER-beta.999-$2.xz$3/,\
+repack,\
+repacksuffix=+dfsg1,\
+compression=xz,\
+" \
+ https://forge.rust-lang.org/other-installation-methods.html \
+ (?:.*/)rustc?-(.*)-src\.tar\.[gx]z
projects / rustc.git / commitdiff
