--- /dev/null
--- /dev/null
++ATLAS for Debian
++================
++
++Why are optimized packages no longer available?
++-----------------------------------------------
++
++Before version 3.8.3-25, optimized binary packages were provided. However, due
++to the fact that most Atlas optimisations are done at build time, it has been
++decided to remove them and give priority to locally built packages.
++
++See section "Building Optimized Atlas Packages on your ARCH" on how to rebuild
++Atlas for best performances.
++
++For more information about linear algebra libraries, see also:
++
++ http://people.debian.org/~sylvestre/presentation-linear-algebra.pdf
++
++
++How to switch between BLAS/LAPACK implementations
++-------------------------------------------------
++
++It is trivial to switch between the various BLAS/LAPACK implementations.
++
++- BLAS:
++
++ $ sudo update-alternatives --config libblas.so.3-<multiarch>
++
++- LAPACK:
++
++ $ sudo update-alternatives --config liblapack.so.3-<multiarch>
++
++where <multiarch> is the multiarch path for you architecture (e.g.
++x86_64-linux-gnu for amd64).
++
++More information is available here:
++
++ http://wiki.debian.org/DebianScience/LinearAlgebraLibraries
++
++
++Building Optimized Atlas Packages on your ARCH
++----------------------------------------------
++
++Building your own optimized packages of Atlas is straightforward.
++
++1) Get the sources of the package and its build-dependencies:
++
++ $ apt-get source atlas
++ $ sudo apt-get build-dep atlas
++
++2) Disable CPU throttling if it is enabled. Otherwise Atlas cannot get reliable
++timings and therefore the optimization will be suboptimal. This can easily be
++done using the tools from the cpufrequtils package.
++
++The state of your CPUs can be checked with:
++
++ $ cpufreq-info
++
++If for any CPU, the governor is not set to "performance", then you can do so
++by issuing the following command for each of your CPU cores:
++
++ $ sudo cpufreq-set -g performance -c <cpu#>
++
++where <cpu#> is the CPU core number (the first has number zero).
++
++See INSTALL.txt from the libatlas-doc package for more details on this issue.
++
++3) Build the package by running the following:
++
++ $ cd atlas-<UPSTREAM_VERSION>
++ $ DEB_BUILD_OPTIONS=custom dpkg-buildpackage -uc -b
++
++where <UPSTREAM_VERSION> is replaced with the appropriate value.
++
++If the Atlas build system still complains about CPU throttling issues, despite
++having set the governors to performance, then you can force Atlas by
++uncommenting the following line in debian/rules:
++
++ CONFIGURE_FLAGS += --cripple-atlas-performance
++
++4) When the build finishes (it will take a long time), it should produce a .deb
++file, whose precise name you can figure out using:
++
++ $ ls ../libatlas3-base_*.deb
++
++Install it using:
++
++ $ sudo dpkg -i ../libatlas3-base_<VERSION>_<ARCH>.deb>
++
++replacing <VERSION> and <ARCH> with the appropriate values.
++
++5) If you don't want the Debian package manager to overwrite your optimized
++package with a generic one on system upgrades, you can mark the Atlas package
++to be on hold, with the following command:
++
++ $ sudo aptitude hold libatlas3-base
++
++Don't forget however to periodically check whether a more recent version of the
++package is available for the Debian suite that you are tracking, in which case
++you should go again through this procedure. The version check can be performed
++using:
++
++ $ aptitude versions libatlas3-base
++
++
++Misc
++----
++
++Thanks to David Cournapeau for providing all the patches for the shared
++libraries managements.
++
++
++ -- Sébastien Villemot <sebastien@debian.org>, Thu, 7 Sep 2017 21:50:00 +0200
++ -- Sylvestre Ledru <sylvestre@debian.org>, Tue, 15 May 2012 18:05:34 +0200
--- /dev/null
--- /dev/null
++Recreating upstream tarball
++===========================
++
++atlas*.tar.gz is modified from upstream.
++
++*.pdf are removed from the tarball and the TexDoc directory from the CVS
++AtlasBase module is included.
++
++
++Tuning of the library
++=====================
++
++The ATLAS build system, before creating the binaries, first performs a very
++long series of timing tests in order to tune the library to the precise CPU on
++which it is built.
++
++However, this process sometimes fails because reliable timings cannot be
++obtained. In that case, the build log will contain the following near the end:
++"VARIATION EXCEEDS TOLERANCE, RERUN WITH HIGHER REPS". The solution is simply
++to run the build again [1].
++
++This situation is not convenient for build daemons, because it means that for
++every new source package, it is necessary to ask for several give backs before
++getting the package compiled on all arches.
++
++In order to overcome this problem, the generic ATLAS package uses pre-computed
++timings (called architectural defaults in the ATLAS jargon). These are located
++under debian/archdefs/$(DEB_HOST_ARCH_CPU). The name of the tarballs
++corresponds to the architecture detected by ATLAS (variable ARCH in
++build/Make.inc).
++
++The procedure for creating these architectural defaults on a given platform is
++the following:
++
++ debuild -us -uc -B (will be very long, because timings will be computed)
++ cd build/ARCHS
++ make ArchNew (will create an $(ATLAS_ARCH) subdirectory)
++ tar caf $(ATLAS_ARCH).tar.bz2 $(ATLAS_ARCH)
++ mkdir -p ../../../debian/archdefs/$(DEB_HOST_ARCH_CPU)/
++ mv $(ATLAS_ARCH).tar.bz2 ../../../debian/archdefs/$(DEB_HOST_ARCH_CPU)/
++ echo debian/archdefs/$(DEB_HOST_ARCH_CPU)/$(ATLAS_ARCH).tar.bz2 >> ../../../debian/source/include-binaries
++
++[1] http://math-atlas.sourceforge.net/errata.html#tol
++
++ -- Sébastien Villemot <sebastien@debian.org>, Tue, 1 Aug 2017 18:03:42 +0200
++
--- /dev/null
--- /dev/null
++Note that subdirectories correspond to DEB_HOST_ARCH_CPU. Therefore, amd64 is
++used for kfreebsd-amd64, i386 for kfreebsd-i386 and hurd-i386, and arm for
++armel and armhf.
++
++Here is how some information on where and how the various archdefs were
++generated (other details are in README.source):
++
++- amd64: ATLAS 3.10.1 / karaba.cepremap.org / wheezy / 2013-06-04
++- arm:
++ + GENERIC32.tar.bz2 (for armel): ATLAS 3.10.1 / vamana.villemot.name (Raspberry Pi) / sid / 2013-07-01
++ + GENERIC32FPV3D16MAC.tar.bz2 (for armhf): ATLAS 3.10.3 / asachi.debian.org / sid / 2017-08-10
++- arm64: ATLAS 3.10.3 / asachi.debian.org / sid / 2016-08-05
++- i386: from ATLAS 3.10.1 tarball
++- ia64: ATLAS 3.10.1 / merulo.debian.org / sid / 2013-06-08
++- m68k: created by John Paul Adrian Glaubitz (see https://bugs.debian.org/945913)
++- mipsel: ATLAS 3.10.1 / eder.debian.org / sid / 2013-06-07
++- mips64el: ATLAS 3.10.2 / etler.debian.org / sid / 2015-11-08
++- powerpc: ATLAS 3.10.1 / partch.debian.org / sid / 2013-06-06
++- ppc64: ATLAS 3.10.3 / pizzetti.debian.org / sid / 2017-08-10
++- ppc64el: ATLAS 3.10.3 / plummer.debian.org / sid / 2016-08-05
++- riscv64: created by Manuel A. Fernandez Montecelo (see https://bugs.debian.org/897128)
++- s390x:
++ + IBMz964.tar.bz2: ATLAS 3.10.1 / zelenka.debian.org / sid / 2013-06-06
++ + IBMz1264.tar.bz2: created by Dimitri John Ledkov for Ubuntu
++- sparc64: ATLAS 3.10.3 / notker.debian.net / sid / 2017-08-13
--- /dev/null
--- /dev/null
++prefix=/usr
++libdir=${prefix}/lib/@DEB_HOST_MULTIARCH@/atlas
++includedir=${prefix}/include/@DEB_HOST_MULTIARCH@
++Name: atlas-blas
++Description: Automatically Tuned Linear Algebra Software, BLAS
++Version: @DEB_VERSION_UPSTREAM@
++URL: http://math-atlas.sourceforge.net/
++Libs: -L${libdir} -lblas
++Libs.private: -L${libdir} -latlas -lm
++Cflags: -I${includedir}
--- /dev/null
--- /dev/null
++atlas (3.10.3-12) unstable; urgency=medium
++
++ * Tighten Build-Depends on liblapack-dev to >= 3.10.0-2~
++ This ensures that the fix for CVE-2021-4048 is incorporated.
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 20 Dec 2021 14:15:18 +0100
++
++atlas (3.10.3-11) unstable; urgency=medium
++
++ * Rebuild against lapack 3.10.0
++ * Move some B-D to Build-Depends-Arch
++ * Bump S-V to 4.6.0
++ * Add d/upstream/metadata
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 20 Sep 2021 18:02:49 +0200
++
++atlas (3.10.3-10) unstable; urgency=medium
++
++ * Fix missing symbols in liblapack.so.3 when libblas.so.3 is not the one from
++ ATLAS.
++ The problem was that, in 3.10.3-9, liblapack.so.3 was no longer linked to
++ libatlas.so.3, despite an explicit -latlas in the link command.
++ This was due to the combination of two factors:
++ — ld now defaulting to --as-needed in bullseye
++ — libatlas.so.3 symbols being erroneously embedded in libblas.so.3
++ The fix consists in no longer embedding libatlas.so.3 symbols inside
++ libblas.so.3 (this has always been the intent, for some reason this had not
++ been correctly done). (Closes: #947827)
++ * debian/rules: simplify using debhelper 12.8’s execute_{before,after}_* rules
++ * Bump to debhelper 13
++ — this allows dropping the B-D on dh-exec
++ — mention libsatlas.so and libtatlas.so in debian/not-installed
++ * Separate the {build,binary}-arch rules from {build,binary}-indep
++ * Drop debian/NEWS.Debian: it has never been installed, since it had an
++ incorrect name
++ * Bump S-V to 4.5.0
++ * gfortran-10.patch: new patch, fixes FTBFS against gfortran 10
++ (Closes: #957015)
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 20 May 2020 16:42:23 +0200
++
++atlas (3.10.3-9) unstable; urgency=medium
++
++ * Replace liblapack-pic by liblapack-dev in Build-Depends
++ * Remove architectural defaults for obsolete mips architecture
++ * Add architectural defaults for m68k.
++ Thanks to John Paul Adrian Glaubitz (Closes: #697041, #945913)
++ * Bump S-V to 4.4.1
++ * d/watch: use secure URL
++ * Trim trailing whitespace.
++ * Add missing colon in closes line.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 07 Dec 2019 09:55:29 +0100
++
++atlas (3.10.3-8) unstable; urgency=medium
++
++ * Drop armel-is-v4t.patch.
++ No longer needed now that armel baseline is v5te (see #882174).
++ * Fix build of custom package (.pc file was generated too late)
++ * Bump to debhelper compat level 12
++ * Add Rules-Requires-Root: no
++ * Bump to S-V 4.3.0
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 22 Jan 2019 11:31:26 +0100
++
++atlas (3.10.3-7) unstable; urgency=medium
++
++ * libatlas-doc: add Breaks+Replaces libatlas-base-dev (<< 3.10.3-6~)
++ Thanks to Andreas Beckmann (Closes: #901099)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 09 Jun 2018 19:07:12 +0200
++
++atlas (3.10.3-6) unstable; urgency=medium
++
++ * Resurrect architectural defaults for ia64.
++ * Add architectural defaults for riscv64.
++ Thanks to Manuel A. Fernandez Montecelo (Closes: #897128)
++ * Bump to debhelper compat level 11.
++ * d/rules: remove get-orig-source target.
++ * Remove Built-Using field.
++ Since both LAPACK and ATLAS are under BSD-3-clause, there is no reason to
++ use this field (which is now restricted to license compliance issues).
++ * Bump S-V to 4.1.4.
++ * Update Vcs-* fields for move to salsa.
++ * Install doc under /u/s/d/libatlas-base-dev, per Policy §12.3.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 29 Apr 2018 19:37:01 +0200
++
++atlas (3.10.3-5) unstable; urgency=low
++
++ * libatlas3-base Conflicts+Replaces libcblas3. (Closes: #874802)
++ * libatlas-base-dev Conflicts+Replaces libcblas-dev. (Closes: #874803)
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 13 Sep 2017 22:29:27 +0200
++
++atlas (3.10.3-4) unstable; urgency=low
++
++ * Multi-archify the package.
++ Incidentally, drop the dependency of libatlas-base-dev on libblas-dev, since
++ cblas.h is now managed by the alternative.
++ * kfreebsd.patch: update using the fix applied upstream.
++ * Bump Standards-Version to 4.1.0.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 09 Sep 2017 10:27:50 +0200
++
++atlas (3.10.3-3) unstable; urgency=medium
++
++ * d/control: libatlas-base-dev now directly depends on libblas-dev.
++ This is necessary for having cblas.h under /usr/include (as was
++ the case before libatlas-dev was dropped).
++ * Add archdef for sparc64.
++ * d/control: mark libatlas-doc as M-A foreign.
++ * d/orig-tar.{sh,exclude}: fetch TexDoc subdir from git instead of CVS.
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 16 Aug 2017 22:30:36 +0200
++
++atlas (3.10.3-2) unstable; urgency=medium
++
++ * “The frantic post-release package overhaul”
++
++ [ Sébastien Villemot ]
++ * d/copyright: complete rewrite using machine-readable format 1.0.
++ * Merge libatlas-dev into libatlas-base-dev, drop the former.
++ * Drop useless patches:
++ + d/p/10_s390.diff
++ + d/p/17_hppa.diff
++ + d/p/18_alpha.diff
++ + d/p/20_armel.diff
++ + d/p/22_sh.diff
++ + d/p/16_warning-removed.diff
++ * d/p/ppc64-endianness.patch: new patch, fix machine detection on ppc64.
++ * d/p/fix-typos.patch: new patch.
++ * d/p/missing-cflags.patch: new patch.
++ * Drop patches for creating full BLAS and LAPACK libs, and shared libs.
++ Replace them by rules in debian/rules.
++ Also no longer embed lib(pt)?cblas.a into liblapack.a, not needed.
++ * d/rules:
++ + Rewrite and simplify using dh (drop cdbs).
++ + Support parallel=N in DEB_BUILD_OPTIONS.
++ + Support nodoc in DEB_BUILD_OPTIONS.
++ + Inject flags from dpkg-buildflags into the generic package.
++ Incidentally, this means that the noopt and nostrip flags of
++ DEB_BUILD_OPTIONS are now supported. (Closes: #697203)
++ + Do not use "-Ss flapack" option of configure, it does not work.
++ * d/watch:
++ + Bump to format version 4. Update d/orig-tar.sh to make it compatible with
++ the new invocation syntax.
++ + Add +ds suffix to orig tarball, since we're repacking it.
++ * d/control:
++ + Use canonical URL in Vcs-Browser.
++ + Drop Suggests on libblas-doc, superseded by liblapack-doc.
++ + Remove several unnecessary build-dependencies.
++ + Bump Standards-Version to 4.0.1.
++ + libatlas-test now marked priority optional, per Policy 4.0.1.
++ * Bump debhelper compat level to 10.
++ * Remove obsolete TODO.
++ * d/lapack-atlas.in: add Requires.private on blas.
++ * Custom package:
++ + Use DEB_BUILD_OPTIONS=custom as new interface.
++ By the way, no longer automatically append a changelog entry.
++ (Closes: #854781)
++ + Improve the instructions in README.Debian.
++ + Add -lpthread to dynamic libs and .pc file when relevant.
++ + Ship libpt{c,f77}blas.so when relevant. (Closes: #737834)
++ * armhf generic package: stop using Cortex-a7 machtype, enable VFPv3-D16.
++ * Add archdef for ppc64.
++
++ [ Dimitri John Ledkov ]
++ * d/rules: on Ubuntu s390x set ARCHS to z12.
++ * d/archdefs/s390x: add IBMz12 tarball
++
++ -- Sébastien Villemot <sebastien@debian.org> Thu, 10 Aug 2017 18:39:08 +0200
++
++atlas (3.10.3-1) unstable; urgency=low
++
++ [ Sébastien Villemot ]
++ * Imported Upstream version 3.10.3. (Closes: #833139)
++ * Drop d/p/cpu-throttling-check.diff, no longer needed.
++ Replace it with new --cripple-atlas-performance option.
++ * Drop d/p/ppc64el-new-archdef-name.patch, applied upstream.
++ * Drop d/p/armhf.diff, no longer needed.
++ * d/rules: update architecture/ISA names/enums.
++ * Update archdefs for ppc64el, arm64 and armhf.
++ * d/control:
++ + drop useless Section field for binary package libatlas-test.
++ + bump Standards-Version to 3.9.8, no changes needed.
++ + use secure URLs for Vcs-* fields.
++ * Improve shell syntax in preinst scripts.
++ Thanks to Wolfgang Karall-Ahlborn (Closes: #805406)
++
++ [ Dimitri John Ledkov ]
++ * d/rules: on ppc64el set ARCHES to POWER8.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 06 Aug 2016 20:27:27 +0200
++
++atlas (3.10.2-9) unstable; urgency=medium
++
++ [ Sébastien Villemot ]
++ * d/p/powerpc-dcbt.patch: new patch.
++ Fixes FTBFS on powerpc with recent binutils.
++
++ [ Aurelien Jarno ]
++ * Add archdef for mips64el. (Closes: #804577)
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 23 Nov 2015 19:21:55 +0100
++
++atlas (3.10.2-8) unstable; urgency=medium
++
++ * Remove transitional package libatlas3gf-base.
++ * Remove archdef for sparc.
++ * Mark libatlas-dev as arch:any.
++ It contains generated header files that can differ across architectures.
++ * Remove a few obsolete Suggests/Recommends/Conflicts.
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 06 Nov 2015 18:54:00 +0100
++
++atlas (3.10.2-7) unstable; urgency=medium
++
++ [ Andreas Beckmann ]
++ * libatlas-base-dev.preinst: Cleanup obsolete alternatives dating back to
++ lenny. (Closes: #776089)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 24 Jan 2015 23:06:27 +0100
++
++atlas (3.10.2-6) unstable; urgency=medium
++
++ * Add missing files in archdef for mips.
++ More precisely, add missing GENERIC32/lapack/gcc/atlas_{c,z}GetNB_geqrf.h in
++ debian/archdef/mips/GENERIC32.tar.bz2. The absence of these files was making
++ the compilation insanely long on some buildds, causing FTBFS by timeout.
++ (Closes: #770379)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 22 Nov 2014 13:37:44 +0100
++
++atlas (3.10.2-5) unstable; urgency=medium
++
++ * Add archdef for arm64. Drastically diminishes build time, and avoids random
++ FTBFS. (Closes: #763805)
++ * Add ppc64el support.
++ - New patches (thanks, Michael Normand et al).
++ + ppc64el-abiv2.patch
++ + ppc64el-ifdef-files-with-lvx.patch
++ + ppc64el-new-archdef-name.patch
++ - debian/archdefs/ppc64el/GENERIC64LE.tar.bz2: add archdefs/timings.
++ - debian/archdefs/README: updated accordingly.
++ Thanks to Mauricio Faria de Oliveira for putting this together.
++ (Closes: #766695)
++ * Fix paths in debian/README.source.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 15 Nov 2014 13:53:31 +0100
++
++atlas (3.10.2-4) unstable; urgency=medium
++
++ [ Alastair McKinstry ]
++ * Add pkg-config file atlas-blas.pc and atlas-lapack.pc alias via
++ update-alternatives.
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 15 Oct 2014 21:35:39 +0200
++
++atlas (3.10.2-3) unstable; urgency=medium
++
++ * libatlas3-base: add dependency on libblas-common.
++ The goal is to make BLAS implementations multi-arch safe by preventing the
++ co-installability of, say, libblas3:amd64 and libatlas3-base:i386. See
++ * Drop obsolete note in libatlas3-base package description about former
++ optimized packages.
++ * Bump Standards-Version to 3.9.6, no changes needed.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 27 Sep 2014 20:24:41 +0200
++
++atlas (3.10.2-2) unstable; urgency=medium
++
++ * shared_libraries.diff: no longer include ATLAS-specific symbols in
++ libblas.so and liblapack.so. Rather dynamically link those libraries with
++ libatlas.so. This makes it possible to use liblapack.so from ATLAS with a
++ libblas.so coming from somewhere else. Thanks to Guillem Jover for
++ suggesting this solution. (Closes: #576972)
++ * Revert back to a higher priority in the LAPACK alternatives.
++ The priority had been lowered in 3.8.4-8 in order to minimize the incidence
++ of #576972, so this is no longer needed.
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 05 Aug 2014 18:13:33 +0200
++
++atlas (3.10.2-1) unstable; urgency=medium
++
++ * Imported Upstream version 3.10.2
++ * fix-non-threaded-build.diff: remove patch, fixed upstream.
++ * debian/rules: update to reflect numbering change for architectures.
++ * Remove Sylvestre Ledru from Uploaders. Thanks Sylvestre for your work!
++ * Remove architectural defaults for obsolete ia64 arch.
++ * Drop obsolete code in maintainer scripts to deal with the transitions
++ libblas.so.3gf => libblas.so.3 and liblapack.so.3gf => liblapack.so.3.
++ * Improvement to debian/orig-tar.sh: save CVS download time.
++ * Remove duplicate changelog in libatlas-doc.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 12 Jul 2014 13:40:15 +0200
++
++atlas (3.10.1-4) unstable; urgency=medium
++
++ * libatlas3gf-base: update long description to suppress lintian warning.
++ * Remove architectural defaults for obsolete s390 arch.
++ * Use the new GENERIC arch name for powerpc, instead of POWER3.
++ Hopefully that will fix the FTBFS on powerpc.
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 03 Feb 2014 18:16:51 +0000
++
++atlas (3.10.1-3) unstable; urgency=medium
++
++ * libatlas-base-dev now provides liblapack.so.
++ * Remove unused libatlas-3.so, libatlas-3gf.so and libatlas.so.* virtual
++ packages.
++ * Rewrite logic in libatlas3-base.postinst. (Closes: #719142)
++ * Disable autodetection of machine type on archs for which ATLAS does not
++ provide generic-enough architectural defaults. This is achieved by creating
++ a GENERIC machine type (see generic.diff). In particular, this ensures that
++ the package created on an armel buildd with an ARMv7 will be generic.
++ (Closes: #719355)
++ * Register documentation to doc-base.
++ * Bump Standards-Version to 3.9.5, no changes needed.
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 29 Jan 2014 19:23:08 +0100
++
++atlas (3.10.1-2) unstable; urgency=low
++
++ * Allow the generic package to build on machines with CPU throttling
++ enabled. Otherwise the package FTBFS on some buildds (e.g. biber).
++ Implementation is done by reactivating the "-Si cputhrchk 0" flag
++ (cpu-throtthling-check.diff), and using it in debian/rules.
++ * Add architectural defaults for armel and mips.
++ * armhf.diff: do not enforce 32-registers FPU for Fortran
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 27 Jul 2013 14:26:05 +0200
++
++atlas (3.10.1-1) experimental; urgency=low
++
++ [ Sylvestre Ledru ]
++ * New upstream release (Closes: #609287)
++
++ [ Sébastien Villemot ]
++ * Provide architectural defaults (i.e. precomputed timings) for all
++ release archs (except armel and mips for the time being, due to slow
++ porterboxes). This will make the package build much faster and should
++ eliminate transient build failures due to excessive variance in the
++ timings.
++ * Move symlinks for lib{cblas,f77blas,atlas,lapack_atlas} out of the
++ libblas.so.3 alternative and make them always present, so that
++ software relying on these libs do not break when another alternative
++ is selected for BLAS
++ * ATLAS now has improved ARM support with native asm constructs. This required
++ the following tunes:
++ + armel-is-v4t.diff: new patch, prevents FTBFS on armel; otherwise,
++ ATLAS uses asm constructs too recent for the platform (armel is only v4t)
++ + debian/rules: on armhf, define the ATL_ARM_HARDFP flag; otherwise the asm
++ constructs use the soft-float ABI for passing floating points
++ + on armhf, ensure that -mfloat-abi=softfp and -mcpu=vfpv3 flags are never
++ used; this is implemented via a patch (armhf.diff) and by the use of fixed
++ archdefs
++ * The generic package is now built without multi-threading, because otherwise
++ the package fails to build on some single-processor machines (this required
++ the introduction of a patch: fix-non-threaded-build.diff). As a side effect,
++ the build of the custom package gracefully handles non-threaded
++ builds. (Closes: #602524)
++ * Add libblas.a as slave in the libblas.so alternative (Closes: #701921)
++ * Add symlinks for lib{f77blas,atlas}.a in /usr/lib (Closes: #666203)
++ * Modify shlibs file of libatlas3-base, such that packages using
++ libblas/liblapack depend on any BLAS/LAPACK alternative, while packages
++ depending on ATLAS-specific libraries (e.g. libatlas.so) depend specifically
++ on libatlas3-base.
++ * corei1.diff: remove patch, applied upstream
++ * Use my @debian.org email address
++ * Remove obsolete DM-Upload-Allowed flag
++ * Switch VCS to git
++ * Remove Conflicts/Replaces against pre-squeeze packages
++ * libatlas-base-dev now provides libblas.so, as libblas-dev
++ * No longer use -Wa,--noexecstack in CFLAGS, it makes the package FTBFS
++ * Do not use POWER3 arch for powerpcspe port (Closes: #701068)
++ * Bump to debhelper compat level 9
++ * README.Debian: mention that devscripts is needed to compile the custom
++ package (Closes: #697431)
++ * Bump Standards-Version to 3.9.4. As a consequence, add Built-Using
++ fields because the package embeds stuff from liblapack-pic
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 11 Jun 2013 15:58:16 +0200
++
++atlas (3.8.4-9.1) unstable; urgency=low
++
++ * Non-maintainer upload.
++ * libatlas3gf-base: Add Breaks: octave3.2 (Closes: #706328)
++ This fixes some upgrade paths by removing the obsolete octave3.2 (and its
++ triggers) a bit earlier. This is a workaround for dpkg bug #671711: dpkg
++ may run trigger processing for a package even if its dependencies are not
++ satisfied. The octave3.2 triggers may be run in such a state (with
++ liblapack* and libblas* unpacked but unconfigured, therefore the
++ alternatives may not be setup or dangling) and will fail, aborting the
++ upgrade, even if octave3.2 would be removed later anyway.
++ Similar Breaks exist in libblas3 and libarpack2 to cover more incarnations
++ of this bug.
++
++ -- Andreas Beckmann <anbe@debian.org> Sun, 28 Apr 2013 22:25:26 +0200
++
++atlas (3.8.4-9) unstable; urgency=low
++
++ [ Sébastien Villemot ]
++ * libatlas-test: put in devel/extra, to reflect override
++ * Force generic PPC CPU when building a non-custom package on a PPC arch
++ (Closes: #680096)
++
++ [ Sylvestre Ledru ]
++ * Use series for list the patches
++ * Patches refreshed
++
++ -- Sébastien Villemot <sebastien.villemot@ens.fr> Sat, 04 Aug 2012 11:56:20 +0000
++
++atlas (3.8.4-8) unstable; urgency=low
++
++ * libatlas3-base.prerm, libatlas3gf-base.prerm: avoid crash if libblas.so.3gf
++ or liblapack.so.3gf already deleted
++ * Add 3gf compat symlinks for libcblas, libf77blas and liblapack_atlas
++ (to avoid breakage of some reverse deps)
++ * In the LAPACK alternatives, use a lower priority than Netlib (in order to
++ minimize the incidence of #576972)
++ * Update and clean-up README.Debian
++ * Mention known build failures in README.source
++ * libatlas3gf-base transitional package:
++ + move to section oldlibs
++ + mark as arch:all
++ * Add myself to Uploaders
++ * Set DM-Upload-Allowed to yes
++
++ -- Sébastien Villemot <sebastien.villemot@ens.fr> Sun, 24 Jun 2012 15:36:49 +0000
++
++atlas (3.8.4-7) unstable; urgency=low
++
++ * Force generic x86 CPU when building a non-custom package on an x86 arch
++ (Closes: #676885)
++ * Force 2 threads when not building a custom package (as was the case up
++ to and including 3.8.3-30)
++ * Fix detection of some Intel Core i1 CPUs (corei1.diff)
++
++ -- Sébastien Villemot <sebastien.villemot@ens.fr> Wed, 13 Jun 2012 16:33:20 +0200
++
++atlas (3.8.4-6) unstable; urgency=low
++
++ * Yet an other stupid bug...
++ Merci à Rafael Laboissiere (Closes: #676614)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 08 Jun 2012 20:16:49 +0200
++
++atlas (3.8.4-5) unstable; urgency=low
++
++ * Bring back slave alternative for liblapack.so.3gf.
++ Merci à Sébastien Villemot (Closes: #676495)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 07 Jun 2012 13:02:23 +0200
++
++atlas (3.8.4-4) unstable; urgency=low
++
++ * Upload in unstable (Closes: #673357)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 02 Jun 2012 17:33:13 +0200
++
++atlas (3.8.4-4~exp9) experimental; urgency=low
++
++ * Drop the old conflict on libblas-3.so
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 31 May 2012 19:55:12 +0200
++
++atlas (3.8.4-4~exp8) experimental; urgency=low
++
++ * Replaces and Breaks updated against the right versions of other impacted
++ packages
++ * Force the right version to build against liblapack-dev and libblas-dev
++ * Add a missing conflict
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 22 May 2012 14:32:20 +0200
++
++atlas (3.8.4-4~exp7) experimental; urgency=low
++
++ * Fix a mixed between postinst & preinst (Closes: #643767)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 20 May 2012 17:21:33 +0200
++
++atlas (3.8.4-4~exp6) experimental; urgency=low
++
++ * Moved removal from postinst to preinst
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 18 May 2012 16:06:24 +0200
++
++atlas (3.8.4-4~exp5) experimental; urgency=low
++
++ * libblas and liblapack were not correctly named causing upgrades to fails.
++ (Closes: #643767)
++ * Update the README.Debian and TODO regarding recent changes
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 15 May 2012 18:06:16 +0200
++
++atlas (3.8.4-4~exp4) experimental; urgency=low
++
++ * Remove libblas.so.3gf liblapack.so.3gf references before the install
++ * Fix a typo in the CPU freq (Closes: #672783)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 18 May 2012 16:06:16 +0200
++
++atlas (3.8.4-4~exp3) experimental; urgency=low
++
++ * Update standards version to version 3.9.3
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 10 Apr 2012 22:01:50 +0200
++
++atlas (3.8.4-4~exp2) experimental; urgency=low
++
++ * Join modifications with blas, lapack, atlas and openblas.
++ Declare the replacements of all *3gf blas & lapack implementation
++ (See bug #660607)
++ * postinst-has-useless-call-to-ldconfig & postrm-has-useless-call-to-ldconfig
++ fixed
++ * copyright-refers-to-deprecated-bsd-license-file fixed
++ * libatlas3gf-base is now a transitional package to libatlas3-base
++ * Fix a FTBFS under sh4. Thanks to Nobuhiro Iwamatsu for the patch
++ (Closes: #605650)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 20 Feb 2012 18:58:04 +0100
++
++atlas (3.8.4-4~exp1) experimental; urgency=low
++
++ * Rename libblas3gf package => libblas3
++ * Rename libblas.so.3gf => libblas.so.3
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 04 Sep 2011 14:47:41 +0200
++
++atlas (3.8.4-3) unstable; urgency=low
++
++ * Revert change about devscripts being in the build-dep (see bug #628104)
++ * Fix an error about missing tests when building custom package
++ (Closes: #629528)
++ * Fix an error about the pdf which cannot be found when building custom
++ package.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 07 Jun 2011 20:56:49 +0200
++
++atlas (3.8.4-2) unstable; urgency=low
++
++ * Fix the FTBFS under kfreebsd (kfreebsd.diff) (Closes: #628424)
++ * Update of the README.Ddebian with more information
++ * devscripts added into the build-dep of atlas (Closes: #628104)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 30 May 2011 23:58:17 +0200
++
++atlas (3.8.4-1) unstable; urgency=low
++
++ * New upstream release
++ * force -j 1 of make removed (hopefully fixes the FTBFS)
++ * -Si cputhrchk 0 removed
++ * Standards-Version updated to version 3.9.2
++ * Switch to dpkg-source 3.0 (quilt) format
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 16 May 2011 13:52:42 +0200
++
++atlas (3.8.3-30) unstable; urgency=low
++
++ * Update of the README.Debian (typos, old stuff, etc)
++ * Some clean up and simplification of debian/rules
++ (removed rules to build preoptimized packages)
++ * Remove Recommends on libblas3gf when installing libatlas
++ * Drop control.in (was used when we were build pre-optimized packages)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 19 Mar 2011 09:47:02 +0100
++
++atlas (3.8.3-29) unstable; urgency=low
++
++ [ Simon McVittie ]
++ * Run 'make check' and 'make ptcheck' to build the tests, then install them
++ in libatlas-test (Closes: #588418)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 23 Nov 2010 22:55:34 +0100
++
++atlas (3.8.3-28) unstable; urgency=low
++
++ * Support of sh4. Thanks to Nobuhiro Iwamatsu. (Closes: #595896)
++ * Fix a typo in the README.Debian. Thanks to Jan Medlock. (Closes: #595981)
++ * Clean up of the old .install, postinst & prerm files
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 27 Oct 2010 21:05:48 +0200
++
++atlas (3.8.3-27) unstable; urgency=low
++
++ * Fix a build issue with 64 archs. This issue has been introduced by upload
++ 3.8.3-25
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 05 Sep 2010 13:06:51 +0200
++
++atlas (3.8.3-26) unstable; urgency=low
++
++ * Fix a bug on localized system. For example, the custom build failed on a
++ russian (ru_RU) system. Thanks to Damir Islamov for providing the fix.
++ * Provide more information on how to rebuild custom packages in
++ README.Debian
++ * Provide multithreaded Atlas libraries by default. Many thanks to
++ Dirk Eddelbuettel for the patch. (Closes: #595326)
++ * Standards-Version updated to version 3.9.1
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 04 Sep 2010 00:46:03 +0200
++
++atlas (3.8.3-25) unstable; urgency=low
++
++ * Drop all optimized packages.
++ Before version 3.8.3-25, optimized binary packages were provided.
++ However, due to the fact that most Atlas optimisation are done at build
++ time, it has been decided to remove them and give priority to locally built
++ packages.
++ See README.Debian on how to rebuild Atlas optimized packages.
++ * Force the number of threads to 2
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 25 Aug 2010 21:14:57 +0200
++
++atlas (3.8.3-24) unstable; urgency=low
++
++ [ Denis Barbier ]
++ * Build system should stop on the first error (Closes: #581620).
++ * Update of the vcs metadata
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 07 Jul 2010 08:39:08 +0200
++
++atlas (3.8.3-23) unstable; urgency=low
++
++ * Disable parallel build. This might be the cause of FTBFS.
++ (Closes: #581620, #581621, #584366)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 06 Jul 2010 11:38:55 +0200
++
++atlas (3.8.3-22) unstable; urgency=low
++
++ * sse3 & core2sse3 packages removed for hurd
++ * Fix a build issue under mips & mipsel (patch 21_mips2.diff)
++ * Fix a custom build issue. Thanks to Adrian Benson for the patch
++ (Closes: #576987, #579990)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 11 May 2010 11:39:10 +0200
++
++atlas (3.8.3-21) unstable; urgency=low
++
++ * Maintainer changed to the Debian Science Team
++ * Simplification of the s390 detection
++ * armel detection added (Closes: #243447, #355355)
++ * Revert the sse and sse2 for ia64 (introduced in 3.8.3-18) since these
++ extensions do not exist on this CPU.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 29 Apr 2010 18:03:14 +0200
++
++atlas (3.8.3-20) unstable; urgency=low
++
++ * Fix a problem on the custom build (Closes: #576755)
++ * Some patches renamed to make sure of their order
++ * Fix a FTBFS under mips, hppa & alpha (Closes: #576891)
++ * Add conflicts on libblas{-dev} (<1.2-5) and liblapack{-dev} (<3.2.1-4)
++ to make sure that the update-alternatives mecanism can be used
++ (Closes: #576855)
++ * Fix a priority with 2.0 packages
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 08 Apr 2010 17:51:05 +0200
++
++atlas (3.8.3-19) unstable; urgency=low
++
++ * Upload to unstable (Closes: #536686, #561299, #521056, #569397, #571108
++ #344091, #450692, #517826, #571108, #504586, #552464, #524459)
++ (LP: #458202, #376739, #406520, #505339, #523365, #363510)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 28 Mar 2010 01:05:53 +0100
++
++atlas (3.8.3-18) experimental; urgency=low
++
++ * Youpi, it is working!
++ * Fix a build error with ia64. It also deserves sse & sse2 packages.
++ Could not find if sse3 is well supported for such arch.
++ * NEWS.Debian added
++ * README.Debian added with "how to switch between blas/lapack
++ implementation"
++ * Probably the last upload in experimental before unstable.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 25 Mar 2010 23:39:26 +0100
++
++atlas (3.8.3-17) experimental; urgency=low
++
++ * Was it failing because I removed this stupid target ?!
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 24 Mar 2010 08:44:01 +0100
++
++atlas (3.8.3-16) experimental; urgency=low
++
++ * Put back randomCrashOnBuild.diff. It was not the reason
++ * Disable modification introduced in 3.8.3-14 about DEB_SHLIBDEPS_INCLUDE
++ and put back LD_LIBRARY_PATH=$(CURDIR)/debian/tmp/usr/lib/atlas-base/
++ (Closes: #574999)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 23 Mar 2010 15:11:12 +0100
++
++atlas (3.8.3-15) experimental; urgency=low
++
++ * randomCrashOnBuild.diff was crashing many builds
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 22 Mar 2010 16:18:59 +0000
++
++atlas (3.8.3-14) experimental; urgency=low
++
++ * Might fix the random compilation bug. Thanks to R. Clint Whaley (upstream)
++ for the fix (randomCrashOnBuild.diff)
++ * Fix a useless dep on libatlas3gf-base from all optimized packages
++ (not necessary)
++ * Explicit link against -lpthread added
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 20 Mar 2010 10:16:38 +0100
++
++atlas (3.8.3-13) experimental; urgency=low
++
++ * Support of hurd (hurd.diff)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 10 Mar 2010 13:16:42 +0100
++
++atlas (3.8.3-12) experimental; urgency=low
++
++ * Don't make the assumption that /proc/cpuinfo is available everywhere.
++ Should fix the build issue on hurd-i386
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 07 Mar 2010 12:14:38 +0100
++
++atlas (3.8.3-11) experimental; urgency=low
++
++ * Explicit link against lgfortran & libgcc_s
++ * Old useless / non sense conflicts removed
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 06 Mar 2010 00:29:33 +0100
++
++atlas (3.8.3-10) experimental; urgency=low
++
++ * postinst & prerm added for each packages to manage update-alternatives
++ See: http://wiki.debian.org/DebianScience/LinearAlgebraLibraries
++ * Now, custom built version of Atlas has now incrementing version number
++ Thanks to Adrian Benson for the idea and the implementation
++ * Check that CPU frequencies are correctly set. Thanks to Adrian Benson.
++ (Closes: #571322)
++ * Some old Conflicts: removed
++ * Vcs-Browser & Vcs-Svn updated (packaged moved to Debian Science)
++ * Maintainer updated
++ * Standards-Version updated to version 3.8.4
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 02 Mar 2010 19:48:55 +0100
++
++atlas (3.8.3-9) experimental; urgency=low
++
++ * Fixes kfreebsd* build error (melf.diff added)
++ * Standards-Version updated to version 3.8.4
++ * -lc added back. The problem was due to -melf_i386 which was failing
++ under kfreebsd. (10_remove-lc.diff removed)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 14 Feb 2010 12:07:56 +0100
++
++atlas (3.8.3-8) experimental; urgency=low
++
++ * README.Debian updated with the information relative to ld.so.conf.d/
++ * if Make.inc cannot be found after the configure, fail debian/rules
++ * Port on s390
++ * Patch check-exists.diff added to avoid error when rebuilding
++ * Do not perform the check of CPU extensions under kfreebsd-i386
++ (Closes: #565852)
++ * -lc removed from build process which was failing under kfreebsd-amd64
++ (Closes: #566942)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 10 Feb 2010 16:39:09 +0100
++
++atlas (3.8.3-7) experimental; urgency=low
++
++ * Bad dependencies libatlas3gf-{sse,sse2,sse3,core2sse3} depend on
++ libatlas3gf-base. (Closes: #551689)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 26 Nov 2009 12:02:23 +0100
++
++atlas (3.8.3-6) experimental; urgency=low
++
++ * Fix a bad typo in the libatlas3-amd64sse3-dev package.
++ Thanks to Ryo IGARASHI for spotting it (Closes: #555301)
++ * libatlas3gf-core2sse3 package declaration was missing in debian/control
++ Thanks to Ryo IGARASHI for spotting it (Closes: #551689)
++ * Ondrej has been removed from uploaders (since 3.8.3-1) (Closes: #550412)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 09 Nov 2009 11:37:09 +0100
++
++atlas (3.8.3-5) experimental; urgency=low
++
++ * Add (= ${binary:Version}) on -dev packages
++ (Lintian: weak-library-dev-dependency)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 26 Oct 2009 06:52:05 +0100
++
++atlas (3.8.3-4) experimental; urgency=low
++
++ * Fix some descriptions issues
++ * libatlas3gf-amd64sse3-dev and libatlas-corei7sse3-dev erroneously depend
++ on libatlas-core2sse3. Thanks to Adrian Benson to point out this silly
++ issue (Closes: #551689)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 24 Oct 2009 22:44:30 +0200
++
++atlas (3.8.3-3) experimental; urgency=low
++
++ * Missing dependency against ghostscript (Closes: #548646)
++ * cblas.h & catlas.h are now installed into /usr/include/atlas
++ (Closes: #432860, #481217, #548539)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 27 Sep 2009 23:51:49 +0200
++
++atlas (3.8.3-2) experimental; urgency=low
++
++ * Improve CPU extension check
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 26 Sep 2009 02:39:07 +0200
++
++atlas (3.8.3-1) experimental; urgency=low
++
++ * New upstream version (Closes: #382880)
++ * debian/rules rewritten from scratch
++ * Provides more documentation in the libatlas-doc packages
++ * debian/copyright updated
++ * Add myself to the uploader
++ * Vcs-Browser & Vcs-Svn added
++ * packages libatlas-3dnow-dev & libatlas3gf-3dnow obsoletes
++ * packages libatlas-sse3-dev and libatlas3-sse3 added
++ * libatlas-headers renamed to libatlas-dev
++ * libatlas-dev is now in section libdevel
++ * fakeroot debian/rules custom will generated a package called
++ ../libatlas3gf-base_*.deb which will contain an optimized version of
++ Atlas just for the current arch.
++ * README.Debian updated to reflect the different changes
++ * README.source added to explain where sources of the PDF are
++ * Standards-Version updated to 3.8.3
++ * compat updated to version 7
++ * Camm & Ondrej removed as uploaders
++ * Use of David Cournapeau's patches (many thanks for this great work)
++ * Change of my email address since I am now DD
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 17 Sep 2009 23:31:54 +0200
++
++atlas (3.6.0-23) unstable; urgency=low
++
++ * Split patches out of the diff.gz and integrated them as dpatch patches.
++ * Removing debian/used_lapack_version in clean
++ * Use the changelog from liblapack-dev to find the current lapack version as
++ we don't build-depend on the lapack3 package.
++
++ [ Sylvestre Ledru ]
++ * Watch file updated
++ * Standards-Version changed to 3.8.0
++ * Copyright file updated
++ * Some "set -e" were missing
++
++ -- Bernd Zeimetz <bzed@debian.org> Thu, 16 Oct 2008 11:55:46 +0200
++
++atlas (3.6.0-22) unstable; urgency=low
++
++ [ Bernd Zeimetz ]
++ * Maintainer changed to Debian Scientific Computing Team, adding Camm
++ Maguire and Ondrej Certik as Uploaders.
++ * Acknowledging the previous NMUs, thanks for taking care of the package!
++ * DM-Upload-Allowed: yes field added
++ * Fixing FTBFS error due to inlining the same function several times. Thanks
++ to Matt Kraai for the patch (Closes: #486974).
++
++ -- Ondrej Certik <ondrej@certik.cz> Mon, 11 Aug 2008 21:41:25 +0200
++
++atlas (3.6.0-21.5) unstable; urgency=low
++
++ * Non-maintainer upload to fix cruft I introduced in previous NMU.
++ * Remove debian/po/OLD and debian/po/NEW
++
++ -- Christian Perrier <bubulle@debian.org> Sun, 11 May 2008 10:17:38 +0200
++
++atlas (3.6.0-21.4) unstable; urgency=low
++
++ * Non-maintainer upload to fix pending l10n issues and FTBFS.
++
++ [ Christian Perrier ]
++ * debian/*.templates, debian/po/*.po: Fix name of packages in last
++ sentence of the debconf templates and in the translations
++ Closes: #372366
++ * Add new debconf translations:
++ - Japanese, thanks TANAKA Atushi
++ - Spanish, thanks Felipe Caminos
++ - Finnish, thanks Esko Arajärvi
++ - Galician. Closes: #472589
++ * Update Vietnamese debconf translation, thanks Clytie Siddall
++ * debian/po/POTFILES.in: Changed atlas3 into libatlas3gf
++ * [Lintian] Use Homepage: field in debian/control
++ * [Lintian] Put -dev packages in section libdevel
++
++ [ Matthias Klose ]
++ * Don't build with -mlongcall on powerpc, fixes build failure.
++
++ -- Christian Perrier <bubulle@debian.org> Tue, 25 Mar 2008 18:22:19 +0100
++
++atlas (3.6.0-21.3) unstable; urgency=low
++
++ * Link using gfortran instead of gcc.
++ * Build-depend on gfortran.
++
++ -- Matthias Klose <doko@debian.org> Tue, 05 Feb 2008 03:46:01 +0100
++
++atlas (3.6.0-21.2) unstable; urgency=low
++
++ * Upload to unstable.
++
++ -- Matthias Klose <doko@debian.org> Sun, 03 Feb 2008 01:03:27 +0000
++
++atlas (3.6.0-21.1) experimental; urgency=low
++
++ * Build using gfortran-4.3/gcc-4.3.
++ * debian/*.files: Add new library sonames.
++ * debian/fixshlibs*: Use new 'gf' names.
++ * tune/blas/gemm/CASES/*cases.flg: Remove absolute path for gcc binary.
++
++ -- Matthias Klose <doko@debian.org> Sun, 20 Jan 2008 03:01:00 +0100
++
++atlas (3.6.0-21) unstable; urgency=low
++
++ * gfortran transition
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 08 Nov 2007 11:53:06 -0500
++
++atlas3 (3.6.0-20.6) unstable; urgency=high
++
++ * Non-maintainer upload.
++ * High-urgency upload for RC bugfix.
++ * Use prefetchnta instead of prefetchw in the SSE2 code, for compatibility
++ with EM64T systems. Closes: #393870.
++
++ -- Steve Langasek <vorlon@debian.org> Sun, 18 Feb 2007 03:01:31 -0800
++
++atlas3 (3.6.0-20.5) unstable; urgency=low
++
++ * Non-maintainer upload.
++ * Support GNU/kFreeBSD. Closes: #379161
++ * Stop attempting to build on m68k and arm
++
++ -- Christian Perrier <bubulle@debian.org> Sat, 27 Jan 2007 10:15:04 +0100
++
++atlas3 (3.6.0-20.4) unstable; urgency=low
++
++ * Non-maintainer upload to fix long-longstanding l10n issues
++ * Remove most part of the debconf templates which are way too much
++ intrusive. Closes: #235732, #388816, #388817, #388818, #388821
++ Move them to README.Debian
++ * Turn the remaining notes into "error" templates
++ * Launch debconf-updatepo in the clean target. Closes: #335549
++ * Debconf translation updates:
++ - Added Vietnamese. Closes: #313129
++ - Added Czech. Closes: #310248
++ - Updated Czech. Closes: #335566
++ - Updated Dutch. Closes: #388104, #375315, #392214
++ - Added Swedish. Closes: #336825
++ - Added Georgian (sent during the NMU l10n fix campaign)
++ - Added Portuguese. Closes: #394649
++ - Added German. Closes: #407843
++ - Added Romanian
++ - Added Portuguese. Closes: #408019
++ - Added Russian. Closes: #408145
++
++ -- Christian Perrier <bubulle@debian.org> Tue, 23 Jan 2007 06:02:00 +0100
++
++atlas3 (3.6.0-20.2) unstable; urgency=low
++
++ * NMU.
++ * Remove debian/control fiddling in favour of using debhelper -s
++ (instead of debhelper -a) Thanks to Jeroen van Wolffelaar
++ <jeroen@wolffelaar.nl> for the patch. Closes: #350748
++
++ -- Frederik Schüler <fs@debian.org> Mon, 22 May 2006 12:19:06 +0000
++
++atlas3 (3.6.0-20.1) unstable; urgency=low
++
++ * NMU.
++ * debian/rules: apply patch from Yaroslav Halchenko to add missing
++ targets. Closes: #351646
++
++ -- Bill Allombert <ballombe@debian.org> Sat, 13 May 2006 22:53:16 +0000
++
++atlas3 (3.6.0-20) unstable; urgency=high
++
++ * Have gcc 4.0 and greater recognized as a good compiler in config.c
++ * Remove bx from the clobber list in camm_dpa.h as is explicitly pushed
++ and restored
++ * static proclamation syntax change to uumtst.c
++ * Slightly modify ATL_F77wrap_tr{m,s}v.c to work around gcc 4.0 bug when
++ using -fomit-frame-pointer
++ * Now can build with gcc >=4.0, Closes: #315908.
++
++ -- Camm Maguire <camm@enhanced.com> Wed, 28 Sep 2005 17:35:48 +0000
++
++atlas3 (3.6.0-19) unstable; urgency=high
++
++ * Ignore SIGFPE on alpha in uumtst.c. FIXME -- work with upstream to
++ fix the matrix generator to avoid floating point underflow, which is
++ apparently the origin of this signal. Closes: #278331.
++ * Run xdfindCE on smaller problem sizes on arm, as its emulated floating
++ point is too slow.
++ * FIXME -- clean build specific patches between builds, keeping base in
++ place for timing/testing runs
++ * Add support for arch-specific as opposed to build specific patches in
++ base/patch_sys. FIXME, unapply build-specific patches between builds.
++
++ -- Camm Maguire <camm@enhanced.com> Tue, 26 Oct 2004 20:11:07 +0000
++
++atlas3 (3.6.0-18) unstable; urgency=high
++
++ * Fix AB_DEBUG variable for m68k in debian/rules, Closes: #277881
++ * Rework shlibs and shlibdeps processing to ensure that there are no
++ self depends in library packages -- Closes: #277589. The solution
++ taken here is to make the shlibs files in the standard fashion with
++ dh_makeshlibs, edit the entries to reflect the reference and virtual
++ alternatives, run dh_shlibdeps -a against atlas3-base for robustness,
++ rerun on library packages only using the shlibs in each package to
++ resolve its own dependencies, then finally rewrite the shlibs files to
++ refer to atlas3-base as the first virtual alternative in all files for
++ consistency.
++ * Fix atlas3-altivec.config, Closes: #277600. FIXME -- cpu, cpu model,
++ and cpu family need systematization.
++ * Run testers with TRNG:=10 100 10 on alpha to workaround SIGFPE issue
++ in xduumtst for now. FIXME. Perhaps Jan-Jaap van der Heijden
++ <J.J.vanderHeijden@home.nl> can help?
++
++ -- Camm Maguire <camm@enhanced.com> Mon, 25 Oct 2004 11:36:52 +0000
++
++atlas3 (3.6.0-17) unstable; urgency=high
++
++ * Fix typo in altivec config
++ * ev5 -> ev6
++ * README.Debian edits for the above
++ * Replace alpha base build record with an ev5 timed goto build, which
++ also runs correctly on ev4. Thanks to Jan-Jaap van der Heijden
++ <J.J.vanderHeijden@home.nl>
++ * Amend copyright file to note that on alpha, the GOTO kernels in the
++ distributed binary builds, as well as in any possible user build, make
++ the ATLAS license LGPL.
++ * cpu model -> cpu family in atlas3-2.0.config. Closes: #275333.
++ * Link shared libs to remove undefined symbols
++ * remove duplicate alternatives in shlibs files via mymakeshlibs
++ * Build-depend on lapack (>= 3.0.20000531a-5) to get {s,d}gesdd fixes
++ * Add debug=$(AB_DEBUG) to static run of debian/ab as well as shared.
++ * Backoff m68k build to O2.
++ * 5 Mflops for m68k and arm testers to speed up autobuilds
++ * dh_installmanpages -> dh_installman
++ * retime atlas3-base on a PII in attempt to uncover an apparent error in
++ ade4 use, but in vain.
++ * Pass testers over prime matrix dimensions
++
++ -- Camm Maguire <camm@enhanced.com> Tue, 19 Oct 2004 14:39:14 +0000
++
++atlas3 (3.6.0-16) unstable; urgency=low
++
++ * Add missing control-hppa for new subarch build
++ * Fix custom package build rules, Closes: #267715
++ * Bug fix: "atlas3-ev5-dev depends on atlas2-headers", thanks to
++ Jan-Jaap van der Heijden (Closes: #269387). atlas2-headers ->
++ atlas3-headers in control files
++
++ -- Camm Maguire <camm@enhanced.com> Wed, 1 Sep 2004 17:32:11 +0000
++
++atlas3 (3.6.0-15) unstable; urgency=low
++
++ * Add m68k build record
++ * Add pa risc 2.0 build record as hppa subarch
++ * Updated README.Debian on certain isa extension selections for custom
++ builds on hppa, sparc, and alpha
++ * template edits for ev5, 2.0, v9, and altivec
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 8 Jul 2004 20:53:03 +0000
++
++atlas3 (3.6.0-14) unstable; urgency=low
++
++ * Bug fix: "octave2.1 fails to start on PowerPC", thanks to Jan Medlock
++ (Closes: #253540). Add LONGCALLS variable to debian/rules, supplement
++ -fPIC with -mlong-calls on arm, hppa, mips and mipsel, and with
++ -mlongcall on powerpc.
++ * Bug fix: "better description for atlas3-3dnow", thanks to Roberto
++ Gliese (Closes: #254429). Fix typo in all descriptions
++ * Suggest higher atlas3 isa extension pacakges with substvar
++ libs:Suggests.
++
++ -- Camm Maguire <camm@enhanced.com> Wed, 30 Jun 2004 23:28:19 +0000
++
++atlas3 (3.6.0-13) unstable; urgency=low
++
++ * g77 -> /usr/bin/g77 in ia64 build record
++
++ -- Camm Maguire <camm@enhanced.com> Sun, 6 Jun 2004 17:02:31 +0000
++
++atlas3 (3.6.0-12) unstable; urgency=low
++
++ * export all environment vars in env files -- should get an arm record
++ now
++ * Add ia64 build record
++ * Default BFLOPS and CACHE variables 20 and 512 for m68k and arm to
++ speed up build.
++ * Bug fix: "atlas3: FTBFS on amd64", thanks to Frederik Schueler
++ (Closes: #252737). Fixed g77 path in amd64 build record
++
++ -- Camm Maguire <camm@enhanced.com> Sun, 6 Jun 2004 03:21:13 +0000
++
++atlas3 (3.6.0-11) unstable; urgency=low
++
++ * Add CONFIG_DEFS environment facility to config.c, and set to -DWALL
++ for arm base build in attempts to work around broken cpu rusage timer
++ there.
++ * switch back ppc base and altivec build records after successful
++ autobuilder test run
++
++ -- Camm Maguire <camm@enhanced.com> Sat, 5 Jun 2004 03:42:51 +0000
++
++atlas3 (3.6.0-10) unstable; urgency=low
++
++ * Remove hardocded arch directory from new ppc altivec build, currently
++ running as base.
++ * Add alpha base build record as machine ev4
++ * Fix CARCH sed replacement in debian/rules: $(MY_ISA) -> $*
++ * Need to redo ia64 build record to get correct fortran to C
++ conventions.
++
++ -- Camm Maguire <camm@enhanced.com> Fri, 4 Jun 2004 21:18:04 +0000
++
++atlas3 (3.6.0-9) unstable; urgency=low
++
++ * Remove erroneous local paths from ia64 build record
++ * Install powerpc altivec build record, switch base and altivec builds
++ temporarily to have the autobuilder run the tests against the build
++ * Fix alpha -> powerpc error in control-powerpc
++ * Install control scripts for altivec ppc build
++ * Add v9 sparc build record and control scripts
++ * Add amd64 (pure64) build record, sse2 isaext in base build, mach set
++ to 'Hammer'
++ * default x86_64 machine detection in config.c to amd hammer 64.
++ * modify config.c to detect UltraSparc mach settings as a v9 isa
++ extension
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 3 Jun 2004 23:07:12 +0000
++
++atlas3 (3.6.0-8) unstable; urgency=low
++
++ * updated watch file
++ * installed ia64 build record (base) using machine 'Itanium'
++ * applied sparc patch to tune/blas/gemm/CASES/ATL_dmm4x4x8_US.c as per
++ errata file
++ * added s390 base build record with empty machine type
++
++ -- Camm Maguire <camm@enhanced.com> Tue, 1 Jun 2004 21:56:37 +0000
++
++atlas3 (3.6.0-7) unstable; urgency=low
++
++ * Add sparc build record
++ * Add powerpc base build record
++ * Remove malformed ia64 build record to time again
++ * Add hook for altivec ppc package to time build record on next
++ autobuild
++
++ -- Camm Maguire <camm@enhanced.com> Mon, 31 May 2004 15:50:14 +0000
++
++atlas3 (3.6.0-6) unstable; urgency=low
++
++ * Add clapack.h to atlas3-headers
++ * changelog -> UTF8
++ * Reinstall broken build recors on hppa mips mipsel alpha and ia64
++ * ChangeLog -> changelog for lintian
++
++ -- Camm Maguire <camm@enhanced.com> Sat, 29 May 2004 15:53:11 +0000
++
++atlas3 (3.6.0-5) unstable; urgency=low
++
++ * Add ia64 build record, use itanium 2 for base build environment
++ * Fix two ia64 bugs in config.c, l 1854 && L 2155
++ * Add line in debian/config.expect to proceed with selected flags when
++ they don't match arch defaults.
++ * Add powerpc base environment to sidestep altivec, use G4
++ * Add alpha ev5 build record, this is the goto build which should be
++ changed to ev6 at some point due to an outstanding bug
++ * make ev4 alpha environment for base build
++ * add hppa base build record, blank MACH string for architecture UNKNOWN
++ * change default sparc detection to UNKNOWN in config.c, l 3255
++ * Add mipsel build record with blank MACH base environment setting
++ * Add mips build record with blank MACH base environment setting
++ * max m68k l2 cache at 512K in attempt to get the autobuild to not
++ timeout.
++ * Bug fix: "atlas3-sse2-dev: /usr/lib/libblas-3.a does not exist",
++ thanks to Erik Schnetter (Closes: #249523). Add .a slave alternative
++ links.
++ * Bug fix: "atlas3-sse2 package can't be set up due to awk error",
++ thanks to Mierle Keir (Closes: #234232). Fix awk error in
++ atlas3-sse2.postinst.
++ * Bug fix: "atlas3: FTBFS amd64: Pure64 is using 64bit ABI", thanks to
++ Goswin Brederlow (Closes: #249585). Default BIT to 2 on amd64, rm -f
++ out CONFIG/fname.o CONFIG/cname.o in clean target.
++ * Bug fix: "atlas3: [INTL:fr] French debconf templates translation",
++ thanks to Christian Perrier (Closes: #231935). Add fr.po
++ * Bug fix: "[INTL:nl] new Dutch po-debconf translation", thanks to Luk
++ Claes (Closes: #241314). Add nl.po
++
++ -- Camm Maguire <camm@enhanced.com> Fri, 28 May 2004 21:18:34 +0000
++
++atlas3 (3.6.0-4) unstable; urgency=low
++
++ * Fix error in debian/rules regarding installation of atlas_type.h
++
++ -- Camm Maguire <camm@enhanced.com> Fri, 6 Feb 2004 23:21:25 +0000
++
++atlas3 (3.6.0-3) unstable; urgency=low
++
++ * Port recent bug fixes from atlas2, listed below.
++ * Fixed development alternatives to go with the new library locations.
++ * Bug fix: "atlas3-base-dev: Depends on g77 is missing", thanks to
++ Torsten Werner ( #226376). Added to all -dev packages.
++ * Bug fix: "atlas3-headers: Does have all needed header files for
++ compiling other programs using atlas", thanks to Tomas Ukkonen
++ ( #227453). Added include/atlas_aux.h and
++ include/Linux_base_static/atlas_type.h to atlas3-headers pkg.
++ * Bug fix: "The package description does not follow Debian policy",
++ thanks to Javier Fernández-Sanguino Peña ( #209452). Reworded
++ descriptions.
++ * Bug fix: "atlas3-base: package description is suboptimal", thanks to
++ Jochen Voss ( #227752). Reworded descriptions. Binary
++ packages suggest blas and lapack to assist in debugging, as any
++ program linking against one of these libraries can be cross checked
++ against the reference versions at runtime without recompilation via
++ the use of the LD_LIBRARY_PATH environment variable. -dev packages
++ suggest both blas-doc and lapack-doc. -test package recommends blas
++ and lapack.
++ * Bug fix: "atlas: Please switch to gettext-based debconf templates",
++ thanks to Christian Perrier ( #205812). Ran automated
++ procedure on templates.
++ * Bug fix: "atlas: French translation of gettext debconf templates",
++ thanks to Christian Perrier ( #206596). Installed po/fr.po.
++ * Fixed expect build depends for newer expect package
++ * Moved library locations to better take advantage of new hwcap behavior
++ in ldconfig. Atlas supplied blas and lapack libraries are now in
++ /usr/lib/atlas/{,sse,sse2,3dnow,etc}/. Edited templates accordingly.
++
++ -- Camm Maguire <camm@enhanced.com> Fri, 16 Jan 2004 17:46:09 +0000
++
++atlas3 (3.6.0-2) unstable; urgency=low
++
++ * Fix reference blas/lapack copy error in debian/rules, testers were not
++ being correctly run against reference libraries
++
++ -- Camm Maguire <camm@enhanced.com> Wed, 14 Jan 2004 17:19:49 +0000
++
++atlas3 (3.6.0-1) unstable; urgency=low
++
++ * New upstream release
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 8 Jan 2004 04:05:49 +0000
++
++atlas3 (3.5.19-1) unstable; urgency=low
++
++ * New upstream release
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 18 Dec 2003 21:00:04 +0000
++
++atlas (3.2.1ln-11) unstable; urgency=low
++
++ * Remove atlas and blas dependencies from atlas packages, Closes:
++ #196294, Closes: #196471, Closes: #196568.
++ * Fix broken shlibs to now list atlas2-base | atlas2 for native atlas
++ libs
++
++ -- Camm Maguire <camm@enhanced.com> Fri, 20 Jun 2003 15:06:19 +0000
++
++atlas (3.2.1ln-10) unstable; urgency=low
++
++ * Remove build-depends on g77-3.0 [alpha], Closes: #196257
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 5 Jun 2003 18:54:27 +0000
++
++atlas (3.2.1ln-9) unstable; urgency=low
++
++ * Link libblas.so with lg2c, liblapack.so with lblas lg2c, Closes:
++ #193874
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 5 Jun 2003 13:38:23 +0000
++
++atlas (3.2.1ln-8) unstable; urgency=low
++
++ * Fixed ATL_walltime.c for gcc-3.3, Closes: #194081
++ * gcc-3.3 changes to SSE header files
++ * debian/compat set to 4, versioned debhelper build-depends
++ * Newer standards
++ * Lintian cleanup, Author(s) => Authors
++ * Do postrm ld.so.conf edit and ldconfig only if argument is 'remove'
++ * Make use of '${misc:Depends}'
++ * Load debconf module in appropriate postinst scripts (for lintian)
++ * Remove INSTALL.txt from atlas-doc
++ * Let debhelper handle ldconfig calls
++ * Remove dh_undocumented from rules
++ * Create /etc/ld.so.conf.d/atlas.conf if not there, Closes: #150309
++ * Append newline to /etc/ld.so.conf.d/atlas.conf if doesn't end with one, Closes:
++ #192030
++ * dev packages suggest blas-doc, Closes: #168466
++ * Make postrm scripts handle empty ld.so.conf
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 5 Jun 2003 02:43:38 +0000
++
++atlas (3.2.1ln-7) unstable; urgency=high
++
++ * Forgot to read DEFAULTS variable in config.expect
++ * Need g77-3.0 on alpha to link with lapack, workaround for -mieee bug
++ in g77-2.95 on alpha
++
++ -- Camm Maguire <camm@enhanced.com> Sat, 13 Apr 2002 10:07:52 -0400
++
++atlas (3.2.1ln-6) unstable; urgency=high
++
++ * Installed build record for s390
++ * libblas2.so and liblapack2.so alternative support, Closes: #139073
++ * Accept cpu flag xmm2 as well for SSE2 capability
++ * Added DEFAULTS variable in debian/rules to allow custom building
++ with no upstream atlas defaults; edited README.Debian
++ * Clarifications to README.Debian, Closes: #141745
++
++ -- Camm Maguire <camm@enhanced.com> Wed, 10 Apr 2002 22:27:49 -0400
++
++atlas (3.2.1ln-5) unstable; urgency=low
++
++ * Renamed .new directory holding temporary build record to avoid
++ conflict with main rules iteration over subarchitectures
++ * Installed mips/mipsel build records
++ * Architecture string reset to any, as any existing failure bugs
++ should be reassigned to the compiler
++ * Minor bugfixes to included blas testers, should be no longer used
++
++ -- Camm Maguire <camm@enhanced.com> Sat, 23 Mar 2002 12:42:50 -0500
++
++atlas (3.2.1ln-4) unstable; urgency=low
++
++ * Removed Provides atlas-dev from atlas2-headers
++ * Added mips support
++ * echo build record to stdout when doing a timed build, can get build
++ records this way from the autobuilder output
++ * Small arch specific patch to enable build on s390
++
++ -- Camm Maguire <camm@enhanced.com> Tue, 19 Mar 2002 21:11:43 -0500
++
++atlas (3.2.1ln-3) unstable; urgency=low
++
++ * Changed lapackF tester rules to prevent lapack tests from running
++ twice
++ * chmod +x debian/mm fixing man page generation failure on ppc
++ * Patch to fix strmm errors with 3dnow/sse
++
++ -- Camm Maguire <camm@enhanced.com> Mon, 11 Mar 2002 10:10:12 -0500
++
++atlas (3.2.1ln-2) unstable; urgency=low
++
++ * cblas functions into atlas provided libblas
++ * Powerpc base build record added
++ * Versioned Conflicts/Replaces on atlas2-dev for atlas2-headers,
++ Closes: #135188
++ * Changed debian/ab to accept versioned compiler names, possibly in
++ home directory tree.
++ * Removed blas-testers from package
++ * Build-Depends on blas-test
++ * Manpages for atlas-test, build-depend on help2man
++ * Removed blas dat examples from package, now in blas-test
++ * Fail catching rules for testers
++ * Less flops for testers on slower machines, currently m68k
++ * Build record rules added
++
++ -- Camm Maguire <camm@enhanced.com> Sat, 23 Feb 2002 17:14:57 -0500
++
++atlas (3.2.1ln-1) unstable; urgency=low
++
++ * Unbundled lapack source, now use lapack.a and lapack_pic.a from new
++ lapack packages
++ * hppa base build record, based on parisc 2.0 build
++ * ORed construction in shlibs and shlibs.local
++ * Removed cblas.h from headers package: now in blas-dev
++ * Architecture string added to debian/control source section. HPPA --
++ compiler can't handle single precision real/complex routines,
++ Closes: #133665
++ * MIPSEL -- compiler can't handle large branches
++ * New shlibs(.local), Closes: #134177
++ * Elaborated short package descriptions, Closes: #134303
++ * Elaborated short package descriptions, Closes: #134305
++ * Clarified header package description, Closes: #134304
++ * ARM -- timer can't determine parameters within precision
++ * Reworked debconf priorities, Closes: #133147
++ * References to blas1 -> blas in all files
++ * Removing cblas.h Closes: #134488
++
++ -- Camm Maguire <camm@enhanced.com> Sun, 17 Feb 2002 22:16:43 -0500
++
++atlas (3.2.1l-5) unstable; urgency=low
++
++ * Build record installed for ia64
++ * Patch target facility in debian/rules for selectively applying
++ patches to source for different archs
++ * IA64 patch installed to work around current compiler bugs
++ * Added support for {atlas2,lapack2,blas2}-dev virtual packages
++
++ -- Camm Maguire <camm@enhanced.com> Fri, 1 Feb 2002 19:43:51 -0500
++
++atlas (3.2.1l-4) unstable; urgency=low
++
++ * Fixed typo PIII -> PIV in sse2 descriptions and templates, Closes:
++ #126040
++ * Added arch dirs for remaining woody archs, s390, mips, mipsel and
++ arm
++ * Commented out blank environment variable settings in env files
++
++ -- Camm Maguire <camm@enhanced.com> Sat, 29 Dec 2001 00:16:36 -0500
++
++atlas (3.2.1l-3) unstable; urgency=low
++
++ * Fixed typo in Build-Depends
++ * Fixed spelling errors, Closes: #124427, Closes: #124428, Closes:
++ #124429
++
++ -- Camm Maguire <camm@enhanced.com> Wed, 19 Dec 2001 01:11:06 -0500
++
++atlas (3.2.1l-2) unstable; urgency=low
++
++ * Added conflicts/replaces to control-i386 so new package named
++ upgrade old ones.
++
++ -- Camm Maguire <camm@enhanced.com> Sat, 1 Dec 2001 12:18:32 -0500
++
++atlas (3.2.1l-1) unstable; urgency=low
++
++ * Included lapack source in source package to avoid 'apt-get source',
++ Closes: #112136
++ * Removed Build-Depend on apt
++ * Build-Depend on blas1-dev
++ * Replace 'apt-get source blas' with 'cp /usr/lib/libblas* blas-1.0/'
++ * Replaced SRC/s{ht}o dirs in lapack subbuild with newly provided
++ debian/{shared,static} of the Debian lapack package build
++ * Replaced -O3 -> -O alpha workaround in main Makefile with an awk
++ gsub just where its needed in the tester binary compiles
++ * Added provisional build log for m68k
++ * slasrt -> dlasrt in dlalsd.f in lapack source, Closes: #111377
++ * Added used_lapack_version to docs for library builds, Closes:
++ #111380
++ * Lintian cleans: remove dh_testversion, standards version 3.5.6.0
++ * Corrected 3dnow.txt path in atlas2-athlon.templates, Closes: #114286
++ * Added m68k build record
++ * Add missing F77= (needed for m68k) to lapack-3.0/debian/rules
++ * Build-Depend on fort77 [m68k]
++ * Changed package names on i386: athlon ->3dnow, p3 ->sse, p4 ->sse2
++ * Changed i386 library directories to follow 2.4.x names,
++ /usr/lib/{3dnow,sse,sse2}
++ * Had custom target build appropriate isa extension package for build-
++ time cpu, thereby keeping isa extension instructions out of /usr/lib
++ * Added cache probe of /proc/cpuinfo to speed custom builds where
++ /proc/cpuinfo reports cache
++ * Changed fpu label to base for generic builds
++ * Updated README.Debian for new custom build packaging
++ * Updated lapack routines from errata page to fix Cholesky and LU
++ solve errors
++ * Applied trsm complex performance enhancement from errata page
++ * Fixed Athlon defaults from errata page
++ * Applied Nan number fix from errata page
++ * Fixed ntra->nout bug in c_sblat3.f, line 1342
++ * Made atlas build-depend on gcc-2.95 on i386, and conflict with 3.0
++ there, for performance and config script output reasons.
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 29 Nov 2001 16:02:44 -0500
++
++atlas (3.2.1-12) unstable; urgency=low
++
++ * Quoted alpha F90 build options, Closes: #109767
++ * Added alpha build records for base and ev5.
++
++ -- Camm Maguire <camm@enhanced.com> Sun, 26 Aug 2001 21:39:57 -0400
++
++atlas (3.2.1-11) unstable; urgency=low
++
++ * Architecture for atlas2-base-dev set to any
++ * Architecture for atlas2-headers set to all
++ * Prepended to LD_LIBRARY_PATH for tests, instead of overwriting
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 26 Jul 2001 15:48:27 -0400
++
++atlas (3.2.1-10) unstable; urgency=low
++
++ * Minor changes to debian/rules to build lapack testers correctly, and
++ to thereby correctly demonstrate acceleration with atlas lapack
++ routines
++ * Added chmod +x debian/mymakeshlibs, Closes: #106428
++ * Modifications to README.Debian to reflect automatic /etc/ld.so.conf.d/atlas.conf
++ treatment.
++ * Added base sparc build record
++
++ -- Camm Maguire <camm@enhanced.com> Tue, 24 Jul 2001 22:50:38 -0400
++
++atlas (3.2.1-9) unstable; urgency=low
++
++ * Assemble debian/control as part of build, including only packages
++ relevant to arch, Closes: #105887
++ * Made shlibs files list virtual package dependencies, obviating the
++ need for shlibs.local for packages build-depending on atlas and
++ wishing to make use of the atlas2, blas2, and lapack2 virtual
++ packages
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 19 Jul 2001 17:12:52 -0400
++
++atlas (3.2.1-8) unstable; urgency=low
++
++ * Changed sections/priorities in control to match override
++ * Elimininated dependency of atlas-test on libpthread
++ * Removed erroneous set default istrue in atlas2-base.config
++ * Added build dir for hppa, Closes: #104684
++ * Removed -fPIC from tester binary object builds
++
++ -- Camm Maguire <camm@enhanced.com> Sun, 15 Jul 2001 20:53:52 -0400
++
++atlas (3.2.1-7) unstable; urgency=low
++
++ * Removed blas Makefile patch to account for changes in blas -7
++
++ -- Camm Maguire <camm@enhanced.com> Tue, 10 Jul 2001 23:34:22 -0400
++
++atlas (3.2.1-6) unstable; urgency=low
++
++ * Used -l switch on dh_shlibdeps to catch libfakeroot location,
++ Closes: #103851
++
++ -- Camm Maguire <camm@enhanced.com> Sun, 8 Jul 2001 23:41:00 -0400
++
++atlas (3.2.1-5) unstable; urgency=low
++
++ * Replaced erroneously deleted Build-depends, Closes: #102370
++
++ -- Camm Maguire <camm@enhanced.com> Fri, 6 Jul 2001 12:21:06 -0400
++
++atlas (3.2.1-4) unstable; urgency=low
++
++ * Made changes in debian/ab so that script works with mawk and gawk
++ * Added SSE2 binary for Pentium 4 and higher machines
++ * Replaced build records with gzipped uuencoded versions to save
++ space, Build-Depends added on sharutils
++ * Had sse libs check for kernel 2.2.x and kernel 2.4.x /proc/cpuinfo
++ flags
++
++ -- Camm Maguire <camm@enhanced.com> Wed, 4 Jul 2001 19:38:22 -0400
++
++atlas (3.2.1-3) unstable; urgency=low
++
++ * Debconf templates
++ * Updated control entries to smoothly upgrade from 3.0
++ * Renamed new atlas2-dev package to atlas2-headers, to facilitate
++ upgrade from old atlas2-dev with different components
++ * Automatic configuration of ldso to 1) use best installed atlas
++ binary on running system, and 2) use atlas-provided blas and lapack
++ libs in preference to reference versions
++ * Added m68k directory to enable default build on this arch. Closes:
++ #102766
++
++ -- Camm Maguire <camm@enhanced.com> Mon, 2 Jul 2001 18:18:37 -0400
++
++atlas (3.2.1-2) unstable; urgency=low
++
++ * Added rule to config.expect to kill old subdirs
++ * New xmm build record without threads
++ * New fpu build record without threads
++ * Moved debian/ppc to debian/powerpc, enabling build on this platform.
++ Closes: #88220
++ * Moved 3dnowext to 3dnow, as code can run on both k6 and athlon
++ * Updated Build-Depends, Closes: #102370
++
++ -- Camm Maguire <camm@enhanced.com> Tue, 26 Jun 2001 23:04:13 -0400
++
++atlas (3.2.1-1) unstable; urgency=low
++
++ * New upstream release
++
++ -- Camm Maguire <camm@enhanced.com> Fri, 30 Mar 2001 17:10:06 -0500
++
++atlas (3.2.0-1) unstable; urgency=low
++
++ * New upstream release
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 21 Dec 2000 14:08:24 -0500
++
++atlas (3.0-7) frozen unstable; urgency=low
++
++ * Added cblas objects to /usr/lib/atlas/liblapack, closing #61286
++
++ -- Camm Maguire <camm@enhanced.com> Sat, 1 Apr 2000 19:11:43 +0200
++
++atlas (3.0-6) frozen; urgency=low
++
++ * Development header files were missing -- fixed.
++ * Added note about performance variance with LDA to README.Debian
++ * Passed -ff90 in F90OPTS to lapack, like in 3.0-5 package
++
++ -- Camm Maguire <camm@enhanced.com> Tue, 29 Feb 2000 20:44:58 +0100
++
++atlas (3.0-5) frozen; urgency=low
++
++ * Added -F 200 to ?l2blastst runs to get valid time comparisons for
++ quick tests
++
++ -- Camm Maguire <camm@enhanced.com> Tue, 29 Feb 2000 19:40:28 +0100
++
++atlas (3.0-4) frozen; urgency=low
++
++ * Added 'make clean' to lapack target to ensure that static lapack lib
++ is build correctly
++ * Added development links in blas-1.0 subdirectory so that testing
++ binaries get dynamically linked against blas
++ * Fixed error in shlibs.local
++ * Added suggests lapack-doc for atlas2-dev
++ * Added -F 200 to l2blastst results to get valid time comparisons for
++ quick tests
++
++ -- Camm Maguire <camm@enhanced.com> Wed, 19 Jan 2000 16:25:35 +0100
++
++atlas (3.0-3) frozen; urgency=low
++
++ * Removed brackets from expect script, works with more expect versions
++ now
++ * Added build dependency on apt
++ * Added workarounds to allow building on alpha (g77/complex abs1
++ issue, mmsearch compilation bug with -O3, timer problem -> -DWALL)
++ * Patched config.c to auto detect alpha 21264
++ * Removed Linux_debug build directories
++ * Fixed expect script error
++ * Added /proc/cpuinfo to test results file
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 13 Jan 2000 18:35:53 +0100
++
++atlas (3.0-2) frozen; urgency=low
++
++ * Releasing build with gcc 2.95.2, prior build had segfaults apparently
++ due to compiler error (egcs 2.91.66)
++ * Added build integrity test step to debian/rules
++
++ -- Camm Maguire <camm@enhanced.com> Fri, 7 Jan 2000 22:48:35 -0500
++
++atlas (3.0-1) frozen; urgency=low
++
++ * Applied fixes as listed on www.cs.utk.edu/~rwhaley/ATLAS/errata.html
++ * New upstream release, supplying full BLAS support
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 23 Dec 1999 12:04:54 -0500
++
++atlas (2.0-8) unstable; urgency=low
++
++ * Added some build dependencies
++ * Latest g77 won't compile icamax.f from reference BLAS on alpha;
++ used f2c here instead
++ * Altered config.c to find libblas.a in BLAS dir of source
++ * Changed the build process to use ATLAS' native config program
++ under expect
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 23 Dec 1999 12:04:54 -0500
++
++atlas (2.0-7) unstable; urgency=low
++
++ * Changed toplevel Makefiles to allow proper compilation on generic
++ platforms. As found on netlib, atlas has an interactive build
++ process. A custom 'config' program is compiled and run, which prompts
++ the user for certain information, and writes the toplevel Makefiles.
++ This procedure doesn't fit well with automated building under Debian,
++ so a (pair of) generic Makefiles has been provided for compilation on
++ Debian systems. Some fields were inadvertantly left in these files
++ which pertain to the specific hardware of this maintainer, making
++ building on some machines impossible. This update should allow for
++ proper building on all Debian systems. Furthermore, these Makefiles
++ have been verified to produce libraries with essentially the same
++ performance on the matintainer's hardware. In the future, perhaps the
++ proper way to do this is to run the atlas config program under some
++ special shell, like 'expect'. This would in addition require
++ automated editing of these files by debian/rules.
++
++ -- Camm Maguire <camm@enhanced.com> Fri, 17 Dec 1999 14:53:06 -0500
++
++atlas (2.0-6) unstable; urgency=low
++
++ * Fixed typo in rules: rm -r -> rm -f
++
++ -- Camm Maguire <camm@enhanced.com> Wed, 8 Dec 1999 08:52:01 -0500
++
++atlas (2.0-5) unstable; urgency=low
++
++ * Removed 'make clean' from clean target of rules, as atlas doesn't use this
++ * Removed ConfDump.log in clean target, closing #52083
++
++ -- Camm Maguire <camm@enhanced.com> Mon, 6 Dec 1999 23:11:29 -0500
++
++atlas (2.0-4) unstable; urgency=low
++
++ * Added LD_LIBRARY_PATH to dh_shlibdeps to get dependencies right on
++ machines where atlas and blas are not installed :-)
++
++ -- Camm Maguire <camm@enhanced.com> Tue, 30 Nov 1999 17:53:47 -0500
++
++atlas (2.0-3) unstable; urgency=low
++
++ * Added atlas-test package to provide benchmarking with installed blas
++ * Bumped soname to 2 to match blas package
++ * Added runtime blas library switching notes in README.Debian
++ * Removed 'atlas' package and the 'atlasconfig' script: To tune
++ atlas for the end user's hardware, the procedure now is to
++ rebuild the atlas1{-dev} package(s) from the Debian source
++ * Moved optimized blas library to /usr/lib/atlas (closes: #51300)
++
++ -- Camm Maguire <camm@enhanced.com> Mon, 29 Nov 1999 13:33:05 -0500
++
++atlas (2.0-2) unstable; urgency=low
++
++ * Fixed debian/rules to build correclt after clean unpack (closes: #50508)
++
++ -- Camm Maguire <camm@enhanced.com> Thu, 18 Nov 1999 14:09:13 -0500
++
++atlas (2.0-1) unstable; urgency=low
++
++ * Initial Release.
++
++ -- Camm Maguire <camm@enhanced.com> Tue, 14 Sep 1999 09:28:44 -0400
--- /dev/null
--- /dev/null
++Source: atlas
++Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
++Uploaders: Sébastien Villemot <sebastien@debian.org>
++Section: devel
++Priority: optional
++Build-Depends: debhelper-compat (= 13),
++ debhelper (>= 12.8~)
++Build-Depends-Arch: gfortran,
++ liblapack-dev (>= 3.10.0-2~)
++Build-Depends-Indep: texlive-latex-base,
++ ghostscript
++Standards-Version: 4.6.0
++Vcs-Browser: https://salsa.debian.org/science-team/atlas
++Vcs-Git: https://salsa.debian.org/science-team/atlas.git
++Homepage: http://math-atlas.sourceforge.net/
++Rules-Requires-Root: no
++
++Package: libatlas3-base
++Architecture: any
++Multi-Arch: same
++Section: libs
++Depends: ${shlibs:Depends},
++ ${misc:Depends}
++Breaks: libblas3 (<< 3.7.1-2~),
++ liblapack3 (<< 3.7.1-2~),
++ libopenblas-base (<< 0.2.20+ds-3~),
++ libatlas-base-dev (<< 3.10.3-4~)
++Conflicts: libcblas3
++Provides: libblas.so.3,
++ liblapack.so.3
++Replaces: libcblas3
++Description: Automatically Tuned Linear Algebra Software, generic shared
++ ATLAS is an approach for the automatic generation and optimization of
++ numerical software. Currently ATLAS supplies optimized versions for the
++ complete set of linear algebra kernels known as the Basic Linear Algebra
++ Subroutines (BLAS), and a subset of the linear algebra routines in the
++ LAPACK library.
++ .
++ The libraries in this package are built without any processor extension
++ instructions, and should run on all processors of this general
++ architecture, albeit less than optimally.
++ .
++ If you want to create an ATLAS packaged optimized for your processor, see the
++ section: "Building Optimized Atlas Packages on your ARCH" in README.Debian
++
++Package: libatlas-base-dev
++Architecture: any
++Multi-Arch: same
++Section: libdevel
++Depends: libatlas3-base (= ${binary:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends}
++Suggests: libatlas-doc,
++ liblapack-doc
++Breaks: libblas-dev (<< 3.7.1-2~),
++ liblapack-dev (<< 3.7.1-2~),
++ libopenblas-dev (<< 0.2.20+ds-3~),
++ libatlas-dev (<< 3.10.3-2)
++Conflicts: libcblas-dev
++Provides: libblas.so,
++ liblapack.so
++Replaces: libatlas-dev (<< 3.10.3-2),
++ libcblas-dev
++Description: Automatically Tuned Linear Algebra Software, generic static
++ ATLAS is an approach for the automatic generation and optimization of
++ numerical software. Currently ATLAS supplies optimized versions for the
++ complete set of linear algebra kernels known as the Basic Linear Algebra
++ Subroutines (BLAS), and a subset of the linear algebra routines in the
++ LAPACK library.
++ .
++ This package includes the headers, the static libraries and symbolic links
++ needed for program development.
++
++Package: libatlas-test
++Architecture: any
++Multi-Arch: same
++Depends: ${shlibs:Depends},
++ ${misc:Depends}
++Description: Automatically Tuned Linear Algebra Software, test programs
++ ATLAS is an approach for the automatic generation and optimization of
++ numerical software. Currently ATLAS supplies optimized versions for the
++ complete set of linear algebra kernels known as the Basic Linear Algebra
++ Subroutines (BLAS), and a subset of the linear algebra routines in the
++ LAPACK library.
++ .
++ This package provides dynamically linked testing and bench-marking
++ binaries to compare the BLAS and ATLAS libraries on your system.
++
++Package: libatlas-doc
++Architecture: all
++Multi-Arch: foreign
++Section: doc
++Depends: ${misc:Depends}
++Breaks: libatlas-base-dev (<< 3.10.3-6~)
++Replaces: libatlas-base-dev (<< 3.10.3-6~)
++Description: Automatically Tuned Linear Algebra Software, documentation
++ ATLAS is an approach for the automatic generation and optimization of
++ numerical software. Currently ATLAS supplies optimized versions for the
++ complete set of linear algebra kernels known as the Basic Linear Algebra
++ Subroutines (BLAS), and a subset of the linear algebra routines in the
++ LAPACK library.
++ .
++ This package provides documentation on the ATLAS libraries useful for
++ developers.
--- /dev/null
--- /dev/null
++Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
++Upstream-Name: ATLAS
++Upstream-Contact: R. Clint Whaley <rcwhaley@lsu.edu>
++Source: http://math-atlas.sourceforge.net/
++
++Files: *
++Copyright: 1997-2016 R. Clint Whaley
++ 1999-2000, 2004 Antoine P. Petitet
++ 2000-2001 Peter Soendergaard
++ 2009, 2012 Siju Samuel
++ 2001 Julian Ruhe
++ 2010 IBM Corporation
++ 1998 Jeff Horner
++ 2011 Md. Rakib Hasan
++ 2010-2011 Vesperix Corporation
++ 2009 Chad Zalkin
++ 2011 Md. Majedul Haque Sujon
++ 1999 The Australian National University
++License: BSD-3-clause-ATLAS
++ Redistribution and use in source and binary forms, with or without
++ modification, are permitted provided that the following conditions
++ are met:
++ .
++ 1. Redistributions of source code must retain the above copyright
++ notice, this list of conditions and the following disclaimer.
++ 2. Redistributions in binary form must reproduce the above copyright
++ notice, this list of conditions, and the following disclaimer in
++ the documentation and/or other materials provided with the distri-
++ bution.
++ 3. The name of the University, the ATLAS group, or the names of its
++ contributors may not be used to endorse or promote products deri-
++ ved from this software without specific written permission.
++ .
++ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE UNIVERSITY
++ OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPE-
++ CIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
++ TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEO-
++ RY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (IN-
++ CLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++
++Files: interfaces/blas/F77/src/lsame.f
++ src/blas/f77reference/*
++Copyright: 1992-2017 The University of Tennessee and The University of Tennessee Research Foundation
++ 2000-2017 The University of California Berkeley
++ 2006-2017 The University of Colorado Denverf
++License: BSD-3-clause
++
++Files: bin/extract.c
++Copyright: 1994, 2015, R. Clint Whaley (rwhaley@cs.utk.edu)
++License: GPL-2-modified
++ This program is distributed under the terms of the Gnu
++ General Public License (GPL), with the following two exceptions:
++ (1) Clause (9), dealing with updating the GPL automatically, is
++ specifically disallowed by the author. The author will
++ determine if a newer GPL version is still appropriate.
++ (2) The basefiles extract accepts as input, and the extracted
++ files it produces as output, are specifically designated
++ as outside the scope if this license (i.e. they are *not*
++ required by this license to be GPL).
++ The full, unaltered, text of the GPL is included at the end of
++ the program source listing.
++ .
++ On Debian systems, the complete text of the GNU General Public
++ License, version 2, can be found in the file
++ `/usr/share/common-licenses/GPL-2'.
++
++Files: tune/blas/gemm/CASES/ATL_smm_3dnow_90.c
++Copyright: none
++License: public-domain
++ The authors and University of Kentucky make this software freely
++ available as a PUBLIC DOMAIN release. None of the authors nor
++ University of Kentucky can be held responsible for any problems
++ deriving from use of this software.
++ .
++ The primary author is:
++ .
++ Tim Mattox
++ Department of Electrical and Computer Engineering
++ University of Kentucky
++ Lexington, KY 40506-0046
++ email: tmattox@engr.uky.edu
++ URL: http://aggregate.org/
++
++Files: debian/*
++Copyright: 1999-2007 Camm Maguire <camm@enhanced.com>
++ 2008-2013 Sylvestre Ledru <sylvestre@debian.org>
++ 2013-2017 Sébastien Villemot <sebastien@debian.org>
++License: BSD-3-clause
++
++License: BSD-3-clause
++ Redistribution and use in source and binary forms, with or without
++ modification, are permitted provided that the following conditions are
++ met:
++ .
++ - Redistributions of source code must retain the above copyright
++ notice, this list of conditions and the following disclaimer.
++ .
++ - Redistributions in binary form must reproduce the above copyright
++ notice, this list of conditions and the following disclaimer listed
++ in this license in the documentation and/or other materials
++ provided with the distribution.
++ .
++ - Neither the name of the copyright holders nor the names of its
++ contributors may be used to endorse or promote products derived from
++ this software without specific prior written permission.
++ .
++ The copyright holders provide no reassurances that the source code
++ provided does not infringe any patent, copyright, or any other
++ intellectual property rights of third parties. The copyright holders
++ disclaim any liability to any recipient for claims brought against
++ recipient by any third party for infringement of that parties
++ intellectual property rights.
++ .
++ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
++ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
++ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--- /dev/null
--- /dev/null
++prefix=/usr
++libdir=${prefix}/lib/@DEB_HOST_MULTIARCH@/atlas
++includedir=${prefix}/include/@DEB_HOST_MULTIARCH@
++Name: atlas-lapack
++Description: Automatically Tuned Linear Algebra Software, LAPACK
++Version: @DEB_VERSION_UPSTREAM@
++URL: http://math-atlas.sourceforge.net/
++Libs: -L${libdir} -llapack
++Libs.private: -L${libdir} -latlas -lm
++Requires.private: blas
++Cflags: -I${includedir}
--- /dev/null
--- /dev/null
++usr/include/
++usr/lib/*/*.a
++debian/blas-atlas.pc /usr/lib/${DEB_HOST_MULTIARCH}/pkgconfig/
++debian/lapack-atlas.pc /usr/lib/${DEB_HOST_MULTIARCH}/pkgconfig/
++libblas.a /usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++libblas.so /usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++liblapack.a /usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++liblapack.so /usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++libatlas.so /usr/lib/${DEB_HOST_MULTIARCH}/
++lib*cblas.so /usr/lib/${DEB_HOST_MULTIARCH}/
++lib*f77blas.so /usr/lib/${DEB_HOST_MULTIARCH}/
++liblapack_atlas.so /usr/lib/${DEB_HOST_MULTIARCH}/
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/libblas.so libblas.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/atlas/libblas.so 35 \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/libblas.a libblas.a-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/atlas/libblas.a \
++ --slave /usr/include/@DEB_HOST_MULTIARCH@/cblas.h cblas.h-@DEB_HOST_MULTIARCH@ \
++ /usr/include/@DEB_HOST_MULTIARCH@/cblas-atlas.h \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/blas.pc \
++ blas.pc-@DEB_HOST_MULTIARCH@ /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/blas-atlas.pc
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/liblapack.so \
++ liblapack.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/atlas/liblapack.so 35 \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/liblapack.a liblapack.a-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/atlas/liblapack.a \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/lapack.pc \
++ lapack.pc-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/lapack-atlas.pc
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++# Cleanup pre-multiarch alternative
++if [ "$1" = "upgrade" ] && dpkg --compare-versions "$2" lt 3.10.3-4~
++then
++ update-alternatives --remove libblas.so /usr/lib/atlas-base/atlas/libblas.so
++ update-alternatives --remove liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
++fi
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++if [ "$1" != "upgrade" ]
++then
++ update-alternatives --remove libblas.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/atlas/libblas.so
++
++ update-alternatives --remove liblapack.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/atlas/liblapack.so
++fi
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++Document: atlas-contrib
++Title: User contribution to ATLAS
++Author: R. Clint Whaley
++Abstract: This paper describes the method by which users can speed up ATLAS for themselves,
++ as well as contribute any such speedup to the ATLAS project. It’s written to get you
++ started, in a highly informal (read sloppy) fashion. There’s a lot of material that
++ optimally should be covered in detail, which is only hinted at in this document. Since
++ no real attempt has been made to make the document sheerly backward referential,
++ it is recommended that the user at least skim the entire section before attempting to
++ understand and/or apply information from a given subsection.
++Section: Programming
++
++Format: PDF
++Files: /usr/share/doc/libatlas-base-dev/atlas_contrib.pdf.gz
--- /dev/null
--- /dev/null
++Document: atlas-devel
++Title: A Collaborative guide to ATLAS Development
++Author: R. Clint Whaley and Peter Soendergaard
++Abstract: This paper exists to get you started if you want to do some ATLAS development.
++ The hope is that as new developers work on ATLAS, they will add to this note, so that
++ this information grows with time.
++Section: Programming
++
++Format: PDF
++Files: /usr/share/doc/libatlas-base-dev/atlas_devel.pdf.gz
--- /dev/null
--- /dev/null
++Document: atlas-install
++Title: ATLAS Installation Guide
++Author: R. Clint Whaley
++Abstract: This note provides a brief overview of ATLAS, and describes how to install it.
++ It includes extensive discussion of common configure options, and describes why they
++ might be employed on various platforms. In addition to discussing how to configure and
++ build the ATLAS package, this note also describes how an installer can confirm that
++ the resulting libraries are producing correct answers and running efficiently. Extensive
++ examples are provided, including a full-length example showing the installation of both
++ ATLAS and LAPACK on an example architecture.
++Section: Programming
++
++Format: PDF
++Files: /usr/share/doc/libatlas-base-dev/atlas_install.pdf.gz
--- /dev/null
--- /dev/null
++README
++doc/*.txt
++TexDoc/*.pdf
--- /dev/null
--- /dev/null
++build/bin/*tst usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++build/tune/blas/level1/x* usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++build/tune/blas/gemv/x* usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++build/tune/blas/gemm/x* usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++build/tune/blas/ger/x* usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++build/interfaces/blas/C/testing/x* usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++build/interfaces/blas/F77/testing/x* usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++interfaces/blas/C/testing/*.dat usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++interfaces/blas/F77/testing/*.dat usr/lib/${DEB_HOST_MULTIARCH}/atlas/
--- /dev/null
--- /dev/null
++libblas.so.* /usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++liblapack.so.* /usr/lib/${DEB_HOST_MULTIARCH}/atlas/
++libatlas.so.* /usr/lib/${DEB_HOST_MULTIARCH}/
++lib*cblas.so.* /usr/lib/${DEB_HOST_MULTIARCH}/
++lib*f77blas.so.* /usr/lib/${DEB_HOST_MULTIARCH}/
++liblapack_atlas.so.* /usr/lib/${DEB_HOST_MULTIARCH}/
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/libblas.so.3 \
++ libblas.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/atlas/libblas.so.3 35
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/liblapack.so.3 \
++ liblapack.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/atlas/liblapack.so.3 35
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++# Cleanup pre-multiarch alternative
++if [ "$1" = "upgrade" ] && dpkg --compare-versions "$2" lt 3.10.3-4~
++then
++ update-alternatives --remove libblas.so.3 /usr/lib/atlas-base/atlas/libblas.so.3
++ update-alternatives --remove liblapack.so.3 /usr/lib/atlas-base/atlas/liblapack.so.3
++fi
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++if [ "$1" != "upgrade" ]
++then
++ update-alternatives --remove libblas.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/atlas/libblas.so.3
++
++ update-alternatives --remove liblapack.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/atlas/liblapack.so.3
++fi
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++libatlas 3 libatlas3-base
++libcblas 3 libatlas3-base
++libf77blas 3 libatlas3-base
++liblapack_atlas 3 libatlas3-base
++libblas 3 libblas3 | libblas.so.3
++liblapack 3 liblapack3 | liblapack.so.3
--- /dev/null
--- /dev/null
++usr/lib/${DEB_HOST_MULTIARCH}/libsatlas.so
++usr/lib/${DEB_HOST_MULTIARCH}/libtatlas.so
--- /dev/null
--- /dev/null
++.gitignore
++gitwash
++*.pdf
--- /dev/null
--- /dev/null
++#!/bin/sh -e
++
++# called by uscan with '--upstream-version' <version>
++DIR=ATLAS
++DIRTARGET=atlas-$2
++TAR=../atlas_$2.orig.tar.bz2
++
++# add TexDoc to tarball
++tar -xf $TAR
++mv $DIR $DIRTARGET
++git clone https://github.com/math-atlas/math-atlas.git
++mv math-atlas/AtlasBase/TexDoc/ $DIRTARGET
++rm -rf math-atlas
++rm $TAR
++tar -caf $TAR -X debian/orig-tar.exclude $DIRTARGET
++rm -rf $DIRTARGET
--- /dev/null
--- /dev/null
++Description: Fix typos
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: https://sourceforge.net/p/math-atlas/patches/78/, https://github.com/math-atlas/math-atlas/pull/31
++Applied-Upstream: 3.10.4
++Last-Update: 2017-08-25
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/TexDoc/atlas_devel.tex
+++++ b/TexDoc/atlas_devel.tex
++@@ -226,7 +226,7 @@ but all new codes should do so.
++ if (cond) statement;
++ \end{verbatim}
++ \item Comments are either to the left of a line if there is room, or on
++- lines preceeding the commented code if not, using a style like:
+++ lines preceding the commented code if not, using a style like:
++ \vspace*{-0.1in}
++ \begin{verbatim}
++ /*
++--- a/bin/stattime.c
+++++ b/bin/stattime.c
++@@ -768,7 +768,7 @@ int GetFlags(int nargs, char **args, FIL
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], "no '-' preceeding flag!", i);
+++ PrintUsage(args[0], "no '-' preceding flag!", i);
++ switch(args[i][1])
++ {
++ case 's':
++--- a/results/atl2tvec.c
+++++ b/results/atl2tvec.c
++@@ -787,7 +787,7 @@ int GetFlags /* returns: DOWHAT (AVG,MI
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], "no '-' preceeding flag!", i);
+++ PrintUsage(args[0], "no '-' preceding flag!", i);
++ switch(args[i][1])
++ {
++ case 'c':
++--- a/results/cattvecs.c
+++++ b/results/cattvecs.c
++@@ -39,7 +39,7 @@ char **GetFlags /* RETURNS: arra
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], "no '-' preceeding flag!", i);
+++ PrintUsage(args[0], "no '-' preceding flag!", i);
++ switch(args[i][1])
++ {
++ case '#': /* -# <# files> */
++--- a/results/mergetvecs.c
+++++ b/results/mergetvecs.c
++@@ -41,7 +41,7 @@ char **GetFlags /* RETURNS: arra
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], "no '-' preceeding flag!", i);
+++ PrintUsage(args[0], "no '-' preceding flag!", i);
++ switch(args[i][1])
++ {
++ case 'i': /* -i[1,2] <file> */
++--- a/results/perctvecs.c
+++++ b/results/perctvecs.c
++@@ -40,7 +40,7 @@ char **GetFlags /* RETURNS: arra
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], "no '-' preceeding flag!", i);
+++ PrintUsage(args[0], "no '-' preceding flag!", i);
++ switch(args[i][1])
++ {
++ case 'i': /* -i <file> */
++--- a/results/reducetvec.c
+++++ b/results/reducetvec.c
++@@ -43,7 +43,7 @@ char **GetFlags /* RETURNS: arra
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], "no '-' preceeding flag!", i);
+++ PrintUsage(args[0], "no '-' preceding flag!", i);
++ switch(args[i][1])
++ {
++ case 'i': /* -i <file> */
++--- a/results/stattime.c
+++++ b/results/stattime.c
++@@ -768,7 +768,7 @@ int GetFlags(int nargs, char **args, FIL
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], "no '-' preceeding flag!", i);
+++ PrintUsage(args[0], "no '-' preceding flag!", i);
++ switch(args[i][1])
++ {
++ case 's':
++--- a/results/tvec2plp.c
+++++ b/results/tvec2plp.c
++@@ -31,7 +31,7 @@ char **GetFlags /* RETURNS: arra
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], "no '-' preceeding flag!", i);
+++ PrintUsage(args[0], "no '-' preceding flag!", i);
++ switch(args[i][1])
++ {
++ case 'i': /* -i <file> */
++--- a/tune/blas/gemv/mvktime.c
+++++ b/tune/blas/gemv/mvktime.c
++@@ -584,7 +584,7 @@ void GetFlags(int nargs, char **args, in
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], "No '-' preceeding flag!", i);
+++ PrintUsage(args[0], "No '-' preceding flag!", i);
++ switch(args[i][1])
++ {
++ case 'f' : /* set resfile output */
++--- a/tune/blas/ger/r1ktime.c
+++++ b/tune/blas/ger/r1ktime.c
++@@ -553,7 +553,7 @@ void GetFlags(int nargs, char **args, in
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], "No '-' preceeding flag!", i);
+++ PrintUsage(args[0], "No '-' preceding flag!", i);
++ switch(args[i][1])
++ {
++ case 'f' : /* set resfile output */
++--- a/tune/blas/ger/r2ktime.c
+++++ b/tune/blas/ger/r2ktime.c
++@@ -577,7 +577,7 @@ void GetFlags(int nargs, char **args, in
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], "No '-' preceeding flag!", i);
+++ PrintUsage(args[0], "No '-' preceding flag!", i);
++ switch(args[i][1])
++ {
++ case 'f' : /* set resfile output */
++--- a/tune/blas/ger/s1nxtune.c
+++++ b/tune/blas/ger/s1nxtune.c
++@@ -299,7 +299,7 @@ int GetFlags(int nargs, char **args, enu
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], i, "No '-' preceeding flag!");
+++ PrintUsage(args[0], i, "No '-' preceding flag!");
++ switch(args[i][1])
++ {
++ case 's' :
++--- a/tune/blas/ger/s2nxtune.c
+++++ b/tune/blas/ger/s2nxtune.c
++@@ -300,7 +300,7 @@ int GetFlags(int nargs, char **args, enu
++ for (i=1; i < nargs; i++)
++ {
++ if (args[i][0] != '-')
++- PrintUsage(args[0], i, "No '-' preceeding flag!");
+++ PrintUsage(args[0], i, "No '-' preceding flag!");
++ switch(args[i][1])
++ {
++ case 's' :
--- /dev/null
--- /dev/null
++Description: Add a GENERIC machine type
++ In practice this type will have the same effect than the UNKNOWN machine type,
++ except that it does not try to autodetect the machine CPU.
++ This is useful when trying to build a generic package on an arch for which
++ ATLAS does not define a generic machine type. For example, on a armel buildd
++ with ARMv7 CPU, ATLAS would detect ARMv7 if provided the UNKNOWN type.
++Bug-Debian: https://bugs.debian.org/719355
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: not-needed
++Last-Update: 2017-08-16
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/CONFIG/include/atlconf.h
+++++ b/CONFIG/include/atlconf.h
++@@ -25,7 +25,7 @@ enum ARCHFAM {AFOther=0, AFPPC, AFSPARC,
++ * Corei3EP: v3 Haswell, E5-26XX
++ * Corei4: skylake
++ */
++-#define NMACH 62
+++#define NMACH 63
++ static char *machnam[NMACH] =
++ {"UNKNOWN", "PPCG4", "PPCG5", "POWER3", "POWER4", "POWER5",
++ "POWER6", "POWER7", "POWER8", "POWERe6500",
++@@ -39,7 +39,7 @@ static char *machnam[NMACH] =
++ "USI", "USII", "USIII", "USIV", "UST1", "UST2", "UnknownUS",
++ "MIPSR1xK", "MIPSICE9",
++ "ARMa7", "ARMa9", "ARMa15", "ARMa17",
++- "ARM64xgene1", "ARM64a53", "ARM64a57"};
+++ "ARM64xgene1", "ARM64a53", "ARM64a57", "GENERIC"};
++ enum MACHTYPE {MACHOther, PPCG4, PPCG5, IbmPwr3, IbmPwr4, IbmPwr5,
++ IbmPwr6, IbmPwr7, IbmPwr8, Pwre6500,
++ IbmZ9, IbmZ10, IbmZ196, IbmZ12, IbmZ13, /* s390(x) in Linux */
++@@ -58,7 +58,8 @@ enum MACHTYPE {MACHOther, PPCG4, PPCG5,
++ ARM17, /* lots of tablets */
++ ARM64xg, /* includes ARMv8 */
++ ARM64a53,
++- ARM64a57
+++ ARM64a57,
+++ GENERIC
++ };
++ #define MachIsX86(mach_) \
++ ( (mach_) >= x86x87 && (mach_) <= x86X )
--- /dev/null
--- /dev/null
++Description: Fix FTBFS with gfortran 10
++Origin: other, https://github.com/Reference-LAPACK/lapack/commit/7fb63b1cd386b099d7da6eeaafc3e7dce055a7d0
++Bug-Debian: https://bugs.debian.org/957015
++Forwarded: no
++Reviewed-by: Sébastien Villemot <sebastien@debian.org>
++Last-Update: 2020-05-20
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/interfaces/blas/C/testing/c_dblat1.f
+++++ b/interfaces/blas/C/testing/c_dblat1.f
++@@ -247,11 +247,11 @@
++ IF (ICASE.EQ.7) THEN
++ * .. DNRM2TEST ..
++ STEMP(1) = DTRUE1(NP1)
++- CALL STEST1(DNRM2TEST(N,SX,INCX),STEMP,STEMP,SFAC)
+++ CALL STEST1(DNRM2TEST(N,SX,INCX),STEMP(1),STEMP,SFAC)
++ ELSE IF (ICASE.EQ.8) THEN
++ * .. DASUMTEST ..
++ STEMP(1) = DTRUE3(NP1)
++- CALL STEST1(DASUMTEST(N,SX,INCX),STEMP,STEMP,SFAC)
+++ CALL STEST1(DASUMTEST(N,SX,INCX),STEMP(1),STEMP,SFAC)
++ ELSE IF (ICASE.EQ.9) THEN
++ * .. DSCALTEST ..
++ CALL DSCALTEST(N,SA((INCX-1)*5+NP1),SX,INCX)
++--- a/interfaces/blas/C/testing/c_sblat1.f
+++++ b/interfaces/blas/C/testing/c_sblat1.f
++@@ -247,11 +247,11 @@
++ IF (ICASE.EQ.7) THEN
++ * .. SNRM2TEST ..
++ STEMP(1) = DTRUE1(NP1)
++- CALL STEST1(SNRM2TEST(N,SX,INCX),STEMP,STEMP,SFAC)
+++ CALL STEST1(SNRM2TEST(N,SX,INCX),STEMP(1),STEMP,SFAC)
++ ELSE IF (ICASE.EQ.8) THEN
++ * .. SASUMTEST ..
++ STEMP(1) = DTRUE3(NP1)
++- CALL STEST1(SASUMTEST(N,SX,INCX),STEMP,STEMP,SFAC)
+++ CALL STEST1(SASUMTEST(N,SX,INCX),STEMP(1),STEMP,SFAC)
++ ELSE IF (ICASE.EQ.9) THEN
++ * .. SSCALTEST ..
++ CALL SSCALTEST(N,SA((INCX-1)*5+NP1),SX,INCX)
--- /dev/null
--- /dev/null
++Description: Ensure that kfreebsd-* is detected as FreeBSD
++ The "GNU" test is moved at the end, otherwise kfreebsd is recognized as Linux.
++ This is necessary in order to have correct linker flags.
++Forwarded: https://sourceforge.net/p/math-atlas/patches/19/
++Applied-Upstream: 3.10.4
++Last-Update: 2017-08-28
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/CONFIG/src/probe_OS.c
+++++ b/CONFIG/src/probe_OS.c
++@@ -18,11 +18,7 @@ enum OSTYPE ProbeOS(int verb, char *targ
++ res = atlsys_1L(targ, cmnd, verb, 0);
++ if (res)
++ {
++-/*
++- * Accept GNU (HURD) as Linux, since they seem to use same stuff;
++- * This is patch from Sylvestre Ledru; I have no direct experience wt HURD
++- */
++- if(strstr(res, "Linux") || strstr(res, "GNU")) OS = OSLinux;
+++ if(strstr(res, "Linux")) OS = OSLinux;
++ else if(strstr(res, "FreeBSD")) OS = OSFreeBSD;
++ else if (strstr(res, "Darwin")) OS = OSOSX;
++ else if(strstr(res, "SunOS"))
++@@ -59,6 +55,11 @@ enum OSTYPE ProbeOS(int verb, char *targ
++ else ierr = 1;
++ }
++ else if (strstr(res, "HP-UX")) OS = OSHPUX;
+++/*
+++ * Accept GNU (HURD) as Linux, since they seem to use same stuff;
+++ * This is patch from Sylvestre Ledru; I have no direct experience wt HURD
+++ */
+++ else if(strstr(res, "GNU")) OS = OSLinux;
++ else ierr = 1;
++ free(res);
++ }
--- /dev/null
--- /dev/null
++Description: On mips{,el}, do not pass -mabi=n32 flag.
++ The mips{,el} ports use the O32 ABI.
++ See https://www.linux-mips.org/wiki/MIPS_ABI_History for more details on ABIs.
++Bug: https://sourceforge.net/p/math-atlas/support-requests/1053/
++Applied-Upstream: 3.10.4
++Last-Update: 2017-08-25
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/CONFIG/src/SpewMakeInc.c
+++++ b/CONFIG/src/SpewMakeInc.c
++@@ -402,7 +402,7 @@ char *GetPtrbitsFlag(enum OSTYPE OS, enu
++ if (MachIsIA64(arch))
++ return(sp);
++ if (MachIsMIPS(arch))
++- return((ptrbits == 64) ? "-mabi=64" : "-mabi=n32");
+++ return(sp);
++ if (MachIsS390(arch))
++ return((ptrbits == 64) ? "-m64" : "-m31");
++ if (OS == OSAIX)
++--- a/CONFIG/src/probe_comp.c
+++++ b/CONFIG/src/probe_comp.c
++@@ -596,7 +596,7 @@ char *GetPtrbitsFlag(enum OSTYPE OS, enu
++ if (MachIsIA64(arch))
++ return(sp);
++ if (MachIsMIPS(arch))
++- return((ptrbits == 64) ? "-mabi=64" : "-mabi=n32");
+++ return(sp);
++ if (MachIsS390(arch))
++ return((ptrbits == 64) ? "-m64" : "-m31");
++ if (OS == OSAIX)
--- /dev/null
--- /dev/null
++Description: Add missing CFLAGS when building xmmgen_sse
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: no
++Last-Update: 2017-08-08
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/makes/Make.mmtune
+++++ b/makes/Make.mmtune
++@@ -155,7 +155,7 @@ mmsearch.o : $(mySRCdir)/mmsearch.c $(pa
++ SSEGENOUTDIR :
++ mkdir SSEGENOUTDIR
++ xmmgen_sse : $(mySRCdir)/mmgen_sse.c
++- $(XCC) -o $@ $(mySRCdir)/mmgen_sse.c -lm
+++ $(XCC) $(XCCFLAGS) -o $@ $(mySRCdir)/mmgen_sse.c -lm
++ xmmksearch_sse : xmmgen_sse mmksearch_sse.o SSEGENOUTDIR
++ $(XCC) $(XCCFLAGS) -o $@ mmksearch_sse.o
++ mmksearch_sse.o : $(mySRCdir)/mmksearch_sse.c $(parsedeps)
--- /dev/null
--- /dev/null
++Description: Fix FTBFS on powerpc with recent binutils
++ A recent modification in binutils (see
++ https://sourceware.org/ml/binutils/2015-04/msg00332.html) introduced a change
++ in the way the ppc assembly instructions "dcbt" and "dcbtst" are handled.
++ When compiling on a generic ppc processor, the 3-arguments form of those
++ instructions is no longer accepted, and one must instead use a 2-arguments
++ form (ignoring the TH argument).
++ .
++ Incidentally, the binutils change also fixed a bug in the way those
++ instructions were handled. On a generic ppc processor, they used to be
++ interpreted in the so-called "embedded" form ("dcbt TH, RA, RB", only used on
++ some embedded machines), while they should have been interpreted in the
++ so-called "server" form ("dcbt RA, RB, TH"). The ATLAS assembly directive were
++ apparently written in "server" form, and were therefore mis-assemblied.
++ .
++ Ideally, this patch should be improved in order to use the TH argument on
++ machines that support it (only needed in atlas_prefetch.h; other instances use
++ the default zero value for TH).
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: no
++Last-Update: 2015-11-23
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/include/atlas_prefetch.h
+++++ b/include/atlas_prefetch.h
++@@ -101,15 +101,15 @@
++ #elif defined(ATL_GAS_PPC) && !defined(ATL_ARCH_POWER4)
++ #if defined(__GNUC__) || defined(__IBM_GCC_ASM)
++ #define ATL_pfl1R(mem) \
++- __asm__ __volatile__ ("dcbt 0, %0, 0" : : "r" ((mem)))
+++ __asm__ __volatile__ ("dcbt 0, %0" : : "r" ((mem)))
++ #define ATL_pfl1W(mem) \
++ __asm__ __volatile__ ("dcbtst 0, %0" : : "r" ((mem)))
++ #define ATL_pfST(mem) \
++- __asm__ __volatile__ ("dcbt 0, %0, 1" : : "r" ((mem)))
+++ __asm__ __volatile__ ("dcbt 0, %0" : : "r" ((mem)))
++ #define ATL_pfl1STi(mem, str) \
++ __asm__ __volatile__ ("rlwinm %0, %0, 0, 0, 24\n\t" \
++ "ori %0, %0, 96+%2\n\t" \
++- "dcbt 0, %0, 8" \
+++ "dcbt 0, %0" \
++ : "=r" (mem) \
++ : "0" (mem), "i" (str))
++
++--- a/tune/blas/gemm/CASES/ATL_cmm4x4x128_av.c
+++++ b/tune/blas/gemm/CASES/ATL_cmm4x4x128_av.c
++@@ -350,7 +350,7 @@ MLOOPU:
++ #endif
++ vmaddfp vC01, vA0, vB1, vC33
++ vmaddfp vC11, vA1, vB1, vC33
++- dcbt 0, pfA, 0
+++ dcbt 0, pfA
++ vmaddfp vC21, vA2, vB1, vC33
++ addi pfA, pfA, 64
++ vmaddfp vC31, vA3, vB1, vC33
++@@ -737,7 +737,7 @@ MLOOPU:
++ #endif
++ vmaddfp vC02, va0, vb2, vC02
++ vmaddfp vC12, va1, vb2, vC12
++- dcbt 0, pfB, 0
+++ dcbt 0, pfB
++ vmaddfp vC22, va2, vb2, vC22
++ addi pfB, pfB, 64
++ vmaddfp vC32, va3, vb2, vC32
++@@ -2337,7 +2337,7 @@ MPEELEDU:
++ #endif
++ vmaddfp vC01, vA0, vB1, vC33
++ vmaddfp vC11, vA1, vB1, vC33
++- dcbt 0, pfA, 0
+++ dcbt 0, pfA
++ vmaddfp vC21, vA2, vB1, vC33
++ addi pfA, pfA, 64
++ vmaddfp vC31, vA3, vB1, vC33
++@@ -2724,7 +2724,7 @@ MPEELEDU:
++ #endif
++ vmaddfp vC02, va0, vb2, vC02
++ vmaddfp vC12, va1, vb2, vC12
++- dcbt 0, pfB, 0
+++ dcbt 0, pfB
++ vmaddfp vC22, va2, vb2, vC22
++ addi pfB, pfB, 64
++ vmaddfp vC32, va3, vb2, vC32
++--- a/tune/blas/gemm/CASES/ATL_dmm4x4x32_ppc.c
+++++ b/tune/blas/gemm/CASES/ATL_dmm4x4x32_ppc.c
++@@ -436,7 +436,7 @@ MLOOP:
++ fmadd rC00, rA0, rB0, rC00
++ lfd rb3, 8+KB3*8(pB0)
++ fmadd rC10, rA1, rB0, rC10
++- dcbt 0, pfB, 0
+++ dcbt 0, pfB
++ addi pfB, pfB, 128
++ fmadd rC20, rA2, rB0, rC20
++ fmadd rC30, rA3, rB0, rC30
++@@ -2565,7 +2565,7 @@ MLOOP:
++ #if KB > 1
++ fmadd rC00, ra0, rb0, rC00
++ fmadd rC10, ra1, rb0, rC10
++- dcbt 0, pfA, 0
+++ dcbt 0, pfA
++ addi pfA, pfA, 128
++ fmadd rC20, ra2, rb0, rC20
++ fmadd rC30, ra3, rb0, rC30
++--- a/tune/blas/gemm/CASES/ATL_dmm4x4x80_ppc.c
+++++ b/tune/blas/gemm/CASES/ATL_dmm4x4x80_ppc.c
++@@ -353,9 +353,9 @@ MLOOP:
++ fmul rC11, rA1, rB1
++ fmul rC21, rA2, rB1
++ fmul rC31, rA3, rB1
++- dcbt 0, pfA, 0
+++ dcbt 0, pfA
++ addi pfA, pfA, 128
++- dcbt 0, pfB, 0
+++ dcbt 0, pfB
++ addi pfB, pfB, 128
++ fmul rC02, rA0, rB2
++ fmul rC12, rA1, rB2
++@@ -438,9 +438,9 @@ MLOOP:
++ fmadd rC12, rA1, rB2, rC12
++ fmadd rC22, rA2, rB2, rC22
++ fmadd rC32, rA3, rB2, rC32
++- dcbt 0, pfA, 0
+++ dcbt 0, pfA
++ addi pfA, pfA, 128
++- dcbt 0, pfB, 0
+++ dcbt 0, pfB
++ addi pfB, pfB, 128
++ fmadd rC03, rA0, rB3, rC03
++ fmadd rC13, rA1, rB3, rC13
++@@ -467,8 +467,8 @@ MLOOP:
++ fmadd rC10, rA1, rB0, rC10
++ fmadd rC20, rA2, rB0, rC20
++ fmadd rC30, rA3, rB0, rC30
++- dcbt 0, pfA, 0
++- dcbt 0, pfB, 0
+++ dcbt 0, pfA
+++ dcbt 0, pfB
++ addi pfA, pfA, 128
++ addi pfB, pfB, 128
++ fmadd rC01, rA0, rB1, rC01
++@@ -3956,9 +3956,9 @@ MPEELED:
++ fmul rC11, rA1, rB1
++ fmul rC21, rA2, rB1
++ fmul rC31, rA3, rB1
++- dcbt 0, pfA, 0
+++ dcbt 0, pfA
++ addi pfA, pfA, 128
++- dcbt 0, pfB, 0
+++ dcbt 0, pfB
++ addi pfB, pfB, 128
++ fmul rC02, rA0, rB2
++ fmul rC12, rA1, rB2
++@@ -4041,9 +4041,9 @@ MPEELED:
++ fmadd rC12, rA1, rB2, rC12
++ fmadd rC22, rA2, rB2, rC22
++ fmadd rC32, rA3, rB2, rC32
++- dcbt 0, pfA, 0
+++ dcbt 0, pfA
++ addi pfA, pfA, 128
++- dcbt 0, pfB, 0
+++ dcbt 0, pfB
++ addi pfB, pfB, 128
++ fmadd rC03, rA0, rB3, rC03
++ fmadd rC13, rA1, rB3, rC13
++@@ -4070,8 +4070,8 @@ MPEELED:
++ fmadd rC10, rA1, rB0, rC10
++ fmadd rC20, rA2, rB0, rC20
++ fmadd rC30, rA3, rB0, rC30
++- dcbt 0, pfA, 0
++- dcbt 0, pfB, 0
+++ dcbt 0, pfA
+++ dcbt 0, pfB
++ addi pfA, pfA, 128
++ addi pfB, pfB, 128
++ fmadd rC01, rA0, rB1, rC01
++--- a/tune/blas/gemm/CASES/ATL_dmm8x4x2_vsx.c
+++++ b/tune/blas/gemm/CASES/ATL_dmm8x4x2_vsx.c
++@@ -60,7 +60,7 @@ static inline vector TYPE vec_mergel(vec
++ #ifndef ATL_GOT_L1PREFETCH
++ #ifdef _ARCH_PPC
++ #undef ATL_pfl1R
++-#define ATL_pfl1R(mem) { __asm__ volatile ("dcbt 0, %0, 0" : : "r" ((mem))); }
+++#define ATL_pfl1R(mem) { __asm__ volatile ("dcbt 0, %0" : : "r" ((mem))); }
++ #endif
++ #endif
++
++--- a/tune/blas/gemm/CASES/ATL_smm4x4x128_av.c
+++++ b/tune/blas/gemm/CASES/ATL_smm4x4x128_av.c
++@@ -376,7 +376,7 @@ MLOOP:
++ #endif
++ vmaddfp vC01, vA0, vB1, vC33
++ vmaddfp vC11, vA1, vB1, vC33
++- dcbt 0, pfA, 0
+++ dcbt 0, pfA
++ vmaddfp vC21, vA2, vB1, vC33
++ addi pfA, pfA, 64
++ vmaddfp vC31, vA3, vB1, vC33
++@@ -763,7 +763,7 @@ MLOOP:
++ #endif
++ vmaddfp vC02, va0, vb2, vC02
++ vmaddfp vC12, va1, vb2, vC12
++- dcbt 0, pfB, 0
+++ dcbt 0, pfB
++ vmaddfp vC22, va2, vb2, vC22
++ addi pfB, pfB, 64
++ vmaddfp vC32, va3, vb2, vC32
++@@ -1352,7 +1352,7 @@ MLOOP:
++ #endif
++ vmaddfp vC01, vA0, vB1, vC01
++ #ifdef BETAX
++- dcbt 0, pBETA, 0
+++ dcbt 0, pBETA
++ #endif
++ vmaddfp vC11, vA1, vB1, vC11
++ vmaddfp vC21, vA2, vB1, vC21
++@@ -2319,7 +2319,7 @@ MPEELED:
++ #endif
++ vmaddfp vC01, vA0, vB1, vC33
++ vmaddfp vC11, vA1, vB1, vC33
++- dcbt 0, pfA, 0
+++ dcbt 0, pfA
++ vmaddfp vC21, vA2, vB1, vC33
++ addi pfA, pfA, 64
++ vmaddfp vC31, vA3, vB1, vC33
++@@ -2706,7 +2706,7 @@ MPEELED:
++ #endif
++ vmaddfp vC02, va0, vb2, vC02
++ vmaddfp vC12, va1, vb2, vC12
++- dcbt 0, pfB, 0
+++ dcbt 0, pfB
++ vmaddfp vC22, va2, vb2, vC22
++ addi pfB, pfB, 64
++ vmaddfp vC32, va3, vb2, vC32
++@@ -4379,7 +4379,7 @@ MLOOPU:
++ #endif
++ vmaddfp vC01, vA0, vB1, vC33
++ vmaddfp vC11, vA1, vB1, vC33
++- dcbt 0, pfA, 0
+++ dcbt 0, pfA
++ vmaddfp vC21, vA2, vB1, vC33
++ addi pfA, pfA, 64
++ vmaddfp vC31, vA3, vB1, vC33
++@@ -4766,7 +4766,7 @@ MLOOPU:
++ #endif
++ vmaddfp vC02, va0, vb2, vC02
++ vmaddfp vC12, va1, vb2, vC12
++- dcbt 0, pfB, 0
+++ dcbt 0, pfB
++ vmaddfp vC22, va2, vb2, vC22
++ addi pfB, pfB, 64
++ vmaddfp vC32, va3, vb2, vC32
++@@ -5355,7 +5355,7 @@ MLOOPU:
++ #endif
++ vmaddfp vC01, vA0, vB1, vC01
++ #ifdef BETAX
++- dcbt 0, pBETA, 0
+++ dcbt 0, pBETA
++ #endif
++ vmaddfp vC11, vA1, vB1, vC11
++ vmaddfp vC21, vA2, vB1, vC21
++@@ -6397,7 +6397,7 @@ MPEELEDU:
++ #endif
++ vmaddfp vC01, vA0, vB1, vC33
++ vmaddfp vC11, vA1, vB1, vC33
++- dcbt 0, pfA, 0
+++ dcbt 0, pfA
++ vmaddfp vC21, vA2, vB1, vC33
++ addi pfA, pfA, 64
++ vmaddfp vC31, vA3, vB1, vC33
++@@ -6784,7 +6784,7 @@ MPEELEDU:
++ #endif
++ vmaddfp vC02, va0, vb2, vC02
++ vmaddfp vC12, va1, vb2, vC12
++- dcbt 0, pfB, 0
+++ dcbt 0, pfB
++ vmaddfp vC22, va2, vb2, vC22
++ addi pfB, pfB, 64
++ vmaddfp vC32, va3, vb2, vC32
--- /dev/null
--- /dev/null
++Description: Fix endianness detection on ppc64*
++ The __ORDER_LITTLE_ENDIAN__ macro is defined even on big endian systems.
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: https://sourceforge.net/p/math-atlas/patches/79/
++Applied-Upstream: 3.10.4
++Last-Update: 2017-08-25
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/CONFIG/src/SpewMakeInc.c
+++++ b/CONFIG/src/SpewMakeInc.c
++@@ -557,7 +557,7 @@ int main(int nargs, char **args)
++ fprintf(fpout, "# -------------------------------------------------\n");
++ fprintf(fpout, " ARCH = %s", machnam[mach]);
++ fprintf(fpout, "%d", ptrbits);
++- #if defined(__powerpc64__) && defined(__ORDER_LITTLE_ENDIAN__)
+++ #if defined(__powerpc64__) && (__BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)
++ fprintf(fpout, "LE");
++ #endif
++ if (ISAX)
--- /dev/null
--- /dev/null
++Description: ELFv2 ABI changes for ppc64el
++ For more details, see:
++ https://bugzilla.redhat.com/show_bug.cgi?id=1080073#c40
++Bug-Debian: https://bugs.debian.org/766695
++Forwarded: http://sourceforge.net/p/math-atlas/patches/65/
++Origin: http://sourceforge.net/p/math-atlas/patches/65/#3cb1
++Reviewed-by: Sébastien Villemot <sebastien@debian.org>
++Last-Update: 2014-10-24
++--- a/tune/blas/gemm/CASES/ATL_dmm4x4x32_ppc.c
+++++ b/tune/blas/gemm/CASES/ATL_dmm4x4x32_ppc.c
++@@ -268,7 +268,7 @@ Mjoin(.,ATL_USERMM):
++ .globl Mjoin(_,ATL_USERMM)
++ Mjoin(_,ATL_USERMM):
++ #else
++- #if defined(ATL_USE64BITS)
+++ #if defined(ATL_USE64BITS) && _CALL_ELF != 2
++ /*
++ * Official Program Descripter section, seg fault w/o it on Linux/PPC64
++ */
++@@ -324,8 +324,15 @@ ATL_USERMM:
++ #endif
++
++ #ifdef ATL_USE64BITS
+++#if _CALL_ELF == 2
+++/* ABIv2 */
+++ ld pC0, 104(r1)
+++ ld incCn, 112(r1)
+++#else
+++/* ABIv1 */
++ ld pC0, 120(r1)
++ ld incCn, 128(r1)
+++#endif
++ #elif defined(ATL_AS_OSX_PPC) || defined(ATL_AS_AIX_PPC)
++ lwz pC0, 68(r1)
++ lwz incCn, 72(r1)
++--- a/tune/blas/gemm/CASES/ATL_dmm4x4x80_ppc.c
+++++ b/tune/blas/gemm/CASES/ATL_dmm4x4x80_ppc.c
++@@ -170,13 +170,21 @@ void ATL_USERMM(const int M, const int N
++ const TYPE beta, TYPE *C, const int ldc)
++ (r10) 8(r1)
++ *******************************************************************************
++-64 bit ABIs:
+++64 bit ABIv1s:
++ r3 r4 r5 r6/f1
++ void ATL_USERMM(const int M, const int N, const int K, const TYPE alpha,
++ r7 r8 r9 r10
++ const TYPE *A, const int lda, const TYPE *B, const int ldb,
++ f2 120(r1) 128(r1)
++ const TYPE beta, TYPE *C, const int ldc)
+++
+++64 bit ABIv2s:
+++ r3 r4 r5 r6/f1
+++void ATL_USERMM(const int M, const int N, const int K, const TYPE alpha,
+++ r7 r8 r9 r10
+++ const TYPE *A, const int lda, const TYPE *B, const int ldb,
+++ f2 104(r1) 112(r1)
+++ const TYPE beta, TYPE *C, const int ldc)
++ #endif
++ #ifdef ATL_AS_AIX_PPC
++ .csect .text[PR]
++@@ -202,7 +210,7 @@ Mjoin(.,ATL_USERMM):
++ .globl Mjoin(_,ATL_USERMM)
++ Mjoin(_,ATL_USERMM):
++ #else
++- #if defined(ATL_USE64BITS)
+++ #if defined(ATL_USE64BITS) && _CALL_ELF != 2
++ /*
++ * Official Program Descripter section, seg fault w/o it on Linux/PPC64
++ */
++@@ -257,9 +265,17 @@ ATL_USERMM:
++ #endif
++ #endif
++
+++
++ #if defined (ATL_USE64BITS)
+++#if _CALL_ELF == 2
+++/* ABIv2 */
+++ ld pC0, 104(r1)
+++ ld incCn, 112(r1)
+++#else
+++/* ABIv1 */
++ ld pC0, 120(r1)
++ ld incCn, 128(r1)
+++#endif
++ #elif defined(ATL_AS_OSX_PPC) || defined(ATL_AS_AIX_PPC)
++ lwz pC0, 68(r1)
++ lwz incCn, 72(r1)
++--- a/tune/blas/gemm/CASES/ATL_dmm4x4x2pf_av.c
+++++ b/tune/blas/gemm/CASES/ATL_dmm4x4x2pf_av.c
++@@ -405,8 +405,15 @@ Mjoin(_,ATL_USERMM):
++ */
++ #ifdef ATL_GAS_LINUX_PPC
++ #ifdef ATL_USE64BITS
+++ #if _CALL_ELF == 2
+++ /* ABIv2 */
+++ ld pC0, 104(r1)
+++ ld incCn, 112(r1)
+++ #else
+++ /* ABIv1 */
++ ld pC0, 120(r1)
++ ld incCn, 128(r1)
+++ #endif
++ #else
++ lwz incCn, FSIZE+8(r1)
++ #endif
--- /dev/null
--- /dev/null
++Description: Skip optimizations for big-endian PowerPC.
++ Some of the existing optimized files/cases for PowerPC
++ contain assembly instructions with implicit big-endian
++ behavior - thus incorrect for the little-endian mode -
++ incurring tests failures during the build (i.e., FTBFS).
++ This is being worked on; this is the workaround for now.
++ .
++ Note: this is an alternative for Michael Normand's patch
++ 'atlas.3.10.2-ppc64le_do_not_use_files_with_lvx.patch',
++ in order not to touch file lists/indexes, but only C
++ source code, so the C preprocessor can avoid code per-arch.
++ .
++ For more details, see:
++ https://bugzilla.redhat.com/show_bug.cgi?id=1080073#c40
++Bug-Debian: https://bugs.debian.org/766695
++Forwarded: http://sourceforge.net/p/math-atlas/patches/65/
++Author: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
++Reviewed-by: Sébastien Villemot <sebastien@debian.org>
++Last-Update: 2014-10-28
++--- a/tune/blas/gemm/CASES/ATL_cmm4x4x128_av.c
+++++ b/tune/blas/gemm/CASES/ATL_cmm4x4x128_av.c
++@@ -7,6 +7,11 @@
++ * meaning that this kernel will do an extra store of vector C to memory
++ * for load by the scalar FPU.
++ */
+++
+++#if defined(__powerpc64__) && (__BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)
+++/* FIXME: port to little-endian powerpc64. */
+++#else
+++
++ #include "atlas_asm.h"
++
++ #if !defined(ATL_AS_OSX_PPC) && !defined(ATL_GAS_LINUX_PPC)
++@@ -4257,3 +4262,5 @@ MPEELEDU:
++ ld r3, FST(r1)
++ addi r1, r1, FSIZE
++ blr
+++
+++#endif /* little-endian powerpc64 */
++--- a/tune/blas/gemm/CASES/ATL_dmm4x4x80_ppc.c
+++++ b/tune/blas/gemm/CASES/ATL_dmm4x4x80_ppc.c
++@@ -28,6 +28,10 @@
++ *
++ */
++
+++#if defined(__powerpc64__) && (__BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)
+++/* FIXME: port to little-endian powerpc64. */
+++#else
+++
++ #include "atlas_asm.h"
++ /*
++ * NOTE: this kernel written by R. Clint Whaley, but it uses two key ideas
++@@ -7502,3 +7506,5 @@ DONE:
++ addi r1, r1, FSIZE
++ #endif
++ blr
+++
+++#endif /* little-endian powerpc64 */
++--- a/tune/blas/gemm/CASES/ATL_dmm8x4x2_vsx.c
+++++ b/tune/blas/gemm/CASES/ATL_dmm8x4x2_vsx.c
++@@ -27,6 +27,10 @@
++ *
++ */
++
+++#if defined(__powerpc64__) && (__BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)
+++/* FIXME: port to little-endian powerpc64. */
+++#else
+++
++ #include <altivec.h>
++ #include "atlas_misc.h"
++ #include "atlas_prefetch.h" /* ATL_pfl1R, ATL_pfl1W */
++@@ -659,3 +663,5 @@ void ATL_USERMM
++ }
++ }
++ }
+++
+++#endif /* little-endian powerpc64 */
++--- a/tune/blas/gemm/CASES/ATL_smm4x4x128_av.c
+++++ b/tune/blas/gemm/CASES/ATL_smm4x4x128_av.c
++@@ -28,6 +28,9 @@
++ *
++ */
++
+++#if defined(__powerpc64__) && (__BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)
+++/* FIXME: port to little-endian powerpc64. */
+++#else
++
++ #include "atlas_asm.h"
++
++@@ -8340,3 +8343,5 @@ MPEELEDU:
++ ld r3, FST(r1)
++ addi r1, r1, FSIZE
++ blr
+++
+++#endif /* little-endian powerpc64 */
++--- a/tune/blas/gemm/CASES/ATL_smm8x2x4_av.c
+++++ b/tune/blas/gemm/CASES/ATL_smm8x2x4_av.c
++@@ -27,6 +27,10 @@
++ *
++ */
++
+++#if defined(__powerpc64__) && (__BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)
+++/* FIXME: port to little-endian powerpc64. */
+++#else
+++
++ #include <altivec.h>
++ #include "atlas_misc.h"
++ #include "atlas_prefetch.h" /* ATL_pfl1R, ATL_pfl1W */
++@@ -326,3 +330,5 @@ void ATL_USERMM
++ }
++ }
++ }
+++
+++#endif /* little-endian powerpc64 */
--- /dev/null
--- /dev/null
++Description: Rename ATLAS incomplete liblapack.a to liblapack_atlas.a
++ The liblapack.a created by ATLAS build system is incomplete: it only contains
++ a small subset of the full LAPACK API (only those optimized by ATLAS).
++ Hence rename this library to liblapack_atlas.a to avoid a name conflict with
++ the full liblapack.a.
++ In particular, note that the "-Ss flapack" option of the configure script does
++ not work as expected as of ATLAS 3.10.3.
++Author: <david@evans>
++Forwarded: not-needed
++Last-Update: 2017-08-08
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/CONFIG/src/SpewMakeInc.c
+++++ b/CONFIG/src/SpewMakeInc.c
++@@ -615,7 +615,7 @@ int main(int nargs, char **args)
++ fprintf(fpout, " ATLASlib = $(LIBdir)/libatlas.a\n");
++ fprintf(fpout, " CBLASlib = $(LIBdir)/libcblas.a\n");
++ fprintf(fpout, " F77BLASlib = $(LIBdir)/libf77blas.a\n");
++- fprintf(fpout, " LAPACKlib = $(LIBdir)/liblapack.a\n");
+++ fprintf(fpout, " LAPACKlib = $(LIBdir)/liblapack_atlas.a\n");
++ if (THREADS)
++ {
++ fprintf(fpout, " PTCBLASlib = $(LIBdir)/libptcblas.a\n");
++--- a/Make.top
+++++ b/Make.top
++@@ -657,8 +657,8 @@ install_inc:
++ install_lib:
++ cp $(LIBdir)/libatlas.a $(INSTdir)/.
++ cp $(LIBdir)/libcblas.a $(INSTdir)/.
++- cp $(LIBdir)/liblapack.a $(INSTdir)/.
++- chmod 0644 $(INSTdir)/libatlas.a $(INSTdir)/liblapack.a \
+++ cp $(LIBdir)/liblapack_atlas.a $(INSTdir)/.
+++ chmod 0644 $(INSTdir)/libatlas.a $(INSTdir)/liblapack_atlas.a \
++ $(INSTdir)/libcblas.a
++ - cp $(LIBdir)/libf77blas.a $(INSTdir)/.
++ - chmod 0644 $(INSTdir)/libf77blas.a
++--- a/makes/Make.lib
+++++ b/makes/Make.lib
++@@ -4,10 +4,10 @@ mySRCdir = $(SRCdir)/lib
++ #
++ # override with libatlas.so only when atlas is built to one lib
++ #
++-DYNlibs = liblapack.so libf77blas.so libcblas.so libatlas.so
++-PTDYNlibs = liblapack.so libptf77blas.so libptcblas.so libatlas.so
++-CDYNlibs = liblapack.so libcblas.so libatlas.so
++-CPTDYNlibs = liblapack.so libptcblas.so libatlas.so
+++DYNlibs = liblapack_atlas.so libf77blas.so libcblas.so libatlas.so
+++PTDYNlibs = liblapack_atlas.so libptf77blas.so libptcblas.so libatlas.so
+++CDYNlibs = liblapack_atlas.so libcblas.so libatlas.so
+++CPTDYNlibs = liblapack_atlas.so libptcblas.so libatlas.so
++
++ VER=3.10.3
++ tmpd = RCW_tMp
++@@ -26,7 +26,7 @@ $(tarnam).tar.bz2 :
++ cp $(LIBdir)/libatlas.a $(ARCH)/lib/.
++ cp $(LIBdir)/libf77blas.a $(ARCH)/lib/.
++ cp $(LIBdir)/libcblas.a $(ARCH)/lib/.
++- cp $(LIBdir)/liblapack.a $(ARCH)/lib/.
+++ cp $(LIBdir)/liblapack_atlas.a $(ARCH)/lib/.
++ - cp $(LIBdir)/libptcblas.a $(ARCH)/lib/.
++ - cp $(LIBdir)/libptf77blas.a $(ARCH)/lib/.
++ $(TAR) cf $(tarnam).tar $(ARCH)
++@@ -184,7 +184,7 @@ fat_ptshared :
++ LIBINSTdir="$(LIBINSTdir)"
++ fat_shared : # serial target
++ $(MAKE) TRYALL outso=libsatlas.so \
++- libas="liblapack.a libf77blas.a libcblas.a libatlas.a" \
+++ libas="liblapack_atlas.a libf77blas.a libcblas.a libatlas.a" \
++ LIBINSTdir="$(LIBINSTdir)"
++ #
++ # Builds shared lib, not include fortran codes from LAPACK
++@@ -198,10 +198,10 @@ fat_cshared : libclapack.a
++ libas="libclapack.a libcblas.a libatlas.a" \
++ LIBINSTdir="$(LIBINSTdir)"
++
++-libclapack.a : liblapack.a
+++libclapack.a : liblapack_atlas.a
++ rm -rf clapack libclapack.a
++ mkdir clapack
++- cd clapack ; ar x ../liblapack.a
+++ cd clapack ; ar x ../liblapack_atlas.a
++ rm -f clapack/*f77wrap* clapack/*C2F*
++ ar r libclapack.a clapack/ATL_* clapack/clapack_*
++ rm -rf clapack
++@@ -229,7 +229,7 @@ tdlls: # thread
++ LIBINSTdir="$(LIBINSTdir)"
++ sdlls: # serial target
++ $(MAKE) TRYALL_WIN outso=libsatlas.dll outdef=libsatlas.def \
++- libas="liblapack.a libf77blas.a libcblas.a libatlas.a" \
+++ libas="liblapack_atlas.a libf77blas.a libcblas.a libatlas.a" \
++ LIBINSTdir="$(LIBINSTdir)"
++ cdlls: ctdlls csdlls
++ ctdlls: libptclapack.a # threaded target
++@@ -246,7 +246,7 @@ csdlls: libclapack.a # serial
++ # =======================================================================
++ dylib :
++ rm -rf $(tmpd) ; mkdir $(tmpd)
++- cd $(tmpd) ; ar x ../liblapack.a
+++ cd $(tmpd) ; ar x ../liblapack_atlas.a
++ cd $(tmpd) ; ar x ../libf77blas.a
++ cd $(tmpd) ; ar x ../libcblas.a
++ cd $(tmpd) ; ar x ../libatlas.a
++@@ -283,9 +283,9 @@ ptcdylib : libptclapack.a
++ -compatibility_version $(VER) *.o $(LIBS)
++ rm -rf $(tmpd)
++
++-libclapack.dylib : libcblas.dylib libatlas.dylib liblapack.a
+++libclapack.dylib : libcblas.dylib libatlas.dylib liblapack_atlas.a
++ rm -rf $(tmpd) ; mkdir $(tmpd)
++- cd $(tmpd) ; ar x ../liblapack.a
+++ cd $(tmpd) ; ar x ../liblapack_atlas.a
++ rm -f $(tmpd)/*C2F $(tmpd)/*f77wrap*
++ cd $(tmpd) ; libtool -dynamic -o ../libclapack.dylib \
++ -install_name $(LIBINSTdir)/libclapack.dylib \
--- /dev/null
--- /dev/null
++rename-lapack-atlas.patch
++mips.patch
++kfreebsd.patch
++generic.patch
++ppc64el-abiv2.patch
++ppc64el-ifdef-files-with-lvx.patch
++powerpc-dcbt.patch
++fix-typos.patch
++missing-cflags.patch
++ppc64-endianness.patch
++gfortran-10.patch
--- /dev/null
--- /dev/null
++#!/usr/bin/make -f
++
++# Some ATLAS code uses improper format strings, so disable this
++export DEB_BUILD_MAINT_OPTIONS=hardening=-format
++
++include /usr/share/dpkg/default.mk
++
++# Parallel make variable, used by ATLAS build system
++PMAKE := make
++ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
++PMAKE += -j $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
++endif
++
++GFORTRAN_LIB_PATH := $(shell $(CC) -print-search-dirs | grep ^install: | awk '{print $$2}')
++
++# Flags common to both the generic and custom packages
++CONFIGURE_FLAGS := --prefix="$(CURDIR)/debian/tmp" \
++ --incdir="$(CURDIR)/debian/tmp/usr/include/$(DEB_HOST_MULTIARCH)/" \
++ --libdir="$(CURDIR)/debian/tmp/usr/lib/$(DEB_HOST_MULTIARCH)/" \
++ --shared \
++ -D c -DWALL \
++ -Ss f77lib "-L$(GFORTRAN_LIB_PATH) -lgfortran -lgcc_s -lpthread" \
++ -Ss pmake '$(PMAKE)' \
++ -v 2
++
++ifeq (,$(filter custom,$(DEB_BUILD_OPTIONS)))
++# Building the generic package, so enforce more configuration settings to make
++# the package independent of the build host hardware.
++
++# In particular, force the MACHTYPE and ISA.
++# The following strings and numbers come from xprint_enums (compilable
++# with "make -C build xprint_enums").
++# N.B.: They can change across releases!
++
++ifeq (yes,$(shell dpkg-vendor --derives-from Ubuntu && echo yes))
++UBUNTU := yes
++endif
++
++# Select the machine type
++ifeq ($(DEB_HOST_ARCH),s390x)
++MACHTYPE := $(if $(UBUNTU),IBMz12,IBMz9)
++else ifeq ($(DEB_HOST_ARCH_CPU),ppc64el)
++MACHTYPE := POWER8
++else ifeq ($(DEB_HOST_ARCH_CPU),i386)
++# See http://math-atlas.sourceforge.net/atlas_install/node32.html
++MACHTYPE := x86x87
++else ifeq ($(DEB_HOST_ARCH_CPU),amd64)
++MACHTYPE := x86SSE2
++else ifeq ($(DEB_HOST_ARCH),ia64)
++MACHTYPE := IA64Itan
++else
++# The same as UNKNOWN, except that it does not try autodetection
++# See debian/patches/generic.diff
++MACHTYPE := GENERIC
++endif
++
++# ISA corresponds to the instruction set architecture:
++# - 1 means no instruction set extension
++# - 768 means SSE1+SSE2 (always available on amd64)
++# - 16384 means FPV3D16MAC (always available on armhf)
++# VSX should also be enabled on ppc64el, but as of 3.10.3-2 it FTBFS.
++ifeq ($(DEB_HOST_ARCH_CPU),amd64)
++ISA := 768
++else ifeq ($(DEB_HOST_ARCH),armhf)
++ISA := 16384
++else
++ISA := 1
++endif
++
++# - the cripple-atlas-performance flag is needed for disabling the CPU
++# throttling check, because on some buildds CPU throttling is enabled and we
++# have no way of disabling it;
++# - disable multi-threading (-t 0), because otherwise the package FTBFS on some
++# single-processor machines;
++# - enforce gcc as the compiler for all uses (except for compiling probes,
++# in --cc), because otherwise architectural defaults do not work.
++CONFIGURE_FLAGS += \
++ -b $(DEB_HOST_ARCH_BITS) \
++ -A $(MACHTYPE) \
++ -V $(ISA) \
++ -t 0 \
++ --cc="$(CC)" \
++ --cflags="$(CPPFLAGS) $(CFLAGS)" \
++ -C acg gcc \
++ -F acg "$(CPPFLAGS) $(CFLAGS)" \
++ -C if gfortran \
++ -F if "$(FFLAGS)" \
++ -Ss ADdir ../../debian/archdefs/$(DEB_HOST_ARCH_CPU) \
++ --cripple-atlas-performance
++
++else
++# Flags specific to the custom package
++
++# Uncomment the following if the ATLAS build system still complains after you
++# have set all the CPU governors to "performance"
++#CONFIGURE_FLAGS += --cripple-atlas-performance
++endif
++
++
++GENERATED_DEBIAN_FILES := $(patsubst %.in,%,$(wildcard debian/*.pc.in debian/*.postinst.in debian/*.prerm.in))
++
++$(GENERATED_DEBIAN_FILES): %: %.in
++ sed -e "s/@DEB_VERSION_UPSTREAM@/$(DEB_VERSION_UPSTREAM)/g" \
++ -e "s/@DEB_HOST_MULTIARCH@/$(DEB_HOST_MULTIARCH)/g" < $< > $@
++
++
++%:
++ dh $@
++
++override_dh_auto_configure-arch: $(GENERATED_DEBIAN_FILES)
++ mkdir -p build/
++ cd build && ../configure $(CONFIGURE_FLAGS)
++ @echo "=============================================="
++ @echo -n "Configured arch: "
++ @grep ARCH < build/Make.inc | head -1 | awk '{print $$3}'
++ @echo "=============================================="
++
++override_dh_auto_configure-indep:
++
++override_dh_auto_build-arch:
++ make -C build
++
++ # We do not ship the lib{s,t}atlas.so created by ATLAS build system, they have an awkward name and an incorrect SONAME
++ # Rather create our shared versions of individual ATLAS libraries
++ gfortran $(LDFLAGS) -shared -Wl,-soname=libatlas.so.3 -o libatlas.so.$(DEB_VERSION_UPSTREAM) \
++ -Wl,--whole-archive build/lib/libatlas.a -Wl,--no-whole-archive \
++ $$(test -f build/lib/libptcblas.a && echo -lpthread) -lc -lm
++ ln -sf libatlas.so.$(DEB_VERSION_UPSTREAM) libatlas.so.3
++ ln -sf libatlas.so.$(DEB_VERSION_UPSTREAM) libatlas.so
++
++ gfortran $(LDFLAGS) -shared -Wl,-soname=libcblas.so.3 -o libcblas.so.$(DEB_VERSION_UPSTREAM) \
++ -Wl,--whole-archive build/lib/libcblas.a -Wl,--no-whole-archive \
++ -L. -latlas -lm -lc
++ ln -sf libcblas.so.$(DEB_VERSION_UPSTREAM) libcblas.so.3
++ ln -sf libcblas.so.$(DEB_VERSION_UPSTREAM) libcblas.so
++
++ gfortran $(LDFLAGS) -shared -Wl,-soname=libf77blas.so.3 -o libf77blas.so.$(DEB_VERSION_UPSTREAM) \
++ -Wl,--whole-archive build/lib/libf77blas.a -Wl,--no-whole-archive \
++ -L. -lcblas -latlas -lm -lc
++ ln -sf libf77blas.so.$(DEB_VERSION_UPSTREAM) libf77blas.so.3
++ ln -sf libf77blas.so.$(DEB_VERSION_UPSTREAM) libf77blas.so
++
++ gfortran $(LDFLAGS) -shared -Wl,-soname=liblapack_atlas.so.3 -o liblapack_atlas.so.$(DEB_VERSION_UPSTREAM) \
++ -Wl,--whole-archive build/lib/liblapack_atlas.a -Wl,--no-whole-archive \
++ -L. -lf77blas -lcblas -latlas -lm -lc
++ ln -sf liblapack_atlas.so.$(DEB_VERSION_UPSTREAM) liblapack_atlas.so.3
++ ln -sf liblapack_atlas.so.$(DEB_VERSION_UPSTREAM) liblapack_atlas.so
++
++ if test -f build/lib/libptcblas.a; then \
++ gfortran $(LDFLAGS) -shared -Wl,-soname=libptcblas.so.3 \
++ -o libptcblas.so.$(DEB_VERSION_UPSTREAM) \
++ -Wl,--whole-archive build/lib/libptcblas.a -Wl,--no-whole-archive \
++ -L. -latlas -lm -lc; \
++ ln -sf libptcblas.so.$(DEB_VERSION_UPSTREAM) libptcblas.so.3; \
++ ln -sf libptcblas.so.$(DEB_VERSION_UPSTREAM) libptcblas.so; \
++ fi
++
++ if test -f build/lib/libptf77blas.a; then \
++ gfortran $(LDFLAGS) -shared -Wl,-soname=libptf77blas.so.3 \
++ -o libptf77blas.so.$(DEB_VERSION_UPSTREAM) \
++ -Wl,--whole-archive build/lib/libptf77blas.a -Wl,--no-whole-archive \
++ -L. -lptcblas -latlas -lm -lc; \
++ ln -sf libptf77blas.so.$(DEB_VERSION_UPSTREAM) libptf77blas.so.3; \
++ ln -sf libptf77blas.so.$(DEB_VERSION_UPSTREAM) libptf77blas.so; \
++ fi
++
++ # Create static and shared full BLAS
++ mkdir tmp
++ cd tmp && \
++ if test -f ../build/lib/libptf77blas.a -a -f ../build/lib/libptcblas.a; then \
++ ar x ../build/lib/libptf77blas.a && \
++ ar x ../build/lib/libptcblas.a; \
++ else \
++ ar x ../build/lib/libf77blas.a && \
++ ar x ../build/lib/libcblas.a; \
++ fi
++ ar r libblas.a tmp/*.o
++ rm -rf tmp
++ gfortran $(LDFLAGS) -shared -Wl,-soname=libblas.so.3 -o libblas.so.$(DEB_VERSION_UPSTREAM) \
++ -Wl,--whole-archive libblas.a -Wl,--no-whole-archive \
++ -L. -latlas $$(test -f build/lib/libptcblas.a && echo -lpthread) -lm -lc
++ ln -sf libblas.so.$(DEB_VERSION_UPSTREAM) libblas.so.3
++ ln -sf libblas.so.$(DEB_VERSION_UPSTREAM) libblas.so
++
++ # Kludge to fix blas-atlas.pc by adding -lpthread when needed
++ if test -f build/lib/libptcblas.a; then sed -i 's/^Libs.private: \(.*\)/Libs.private: \1 -lpthread/' debian/blas-atlas.pc; fi
++
++ # Create static and shared full LAPACK
++ # Note that we unpack liblapack_atlas.a after liblapack_pic.a, in order to overwrite routines in the latter
++ mkdir tmp
++ cd tmp && \
++ ar x /usr/lib/$(DEB_HOST_MULTIARCH)/liblapack_pic.a && \
++ ar x ../build/lib/liblapack_atlas.a
++ ar r liblapack.a tmp/*.o
++ rm -rf tmp
++ gfortran $(LDFLAGS) -shared -Wl,-soname=liblapack.so.3 -o liblapack.so.$(DEB_VERSION_UPSTREAM) \
++ -Wl,--whole-archive liblapack.a -Wl,--no-whole-archive \
++ -L. -lblas -latlas -lm -lc
++ ln -sf liblapack.so.$(DEB_VERSION_UPSTREAM) liblapack.so.3
++ ln -sf liblapack.so.$(DEB_VERSION_UPSTREAM) liblapack.so
++
++override_dh_auto_build-indep:
++ # Build PDF documentation
++ifeq (,$(filter nodoc,$(DEB_BUILD_OPTIONS)))
++ make -C TexDoc atlas_contrib.pdf atlas_devel.pdf atlas_install.pdf cblasqref.pdf f77blasqref.pdf lapackqref.pdf
++endif
++
++override_dh_auto_test-arch:
++ make -C build check
++ if test -f build/lib/libptcblas.a; then make -C build ptcheck; fi
++
++override_dh_auto_install-arch:
++ make -C build install # The build system does not support setting DESTDIR at install time
++ mv debian/tmp/usr/include/$(DEB_HOST_MULTIARCH)/cblas.h debian/tmp/usr/include/$(DEB_HOST_MULTIARCH)/cblas-atlas.h
++
++override_dh_installdocs-indep:
++ dh_installdocs -plibatlas-doc --doc-main-package=libatlas-base-dev
++
++# We want packages using libblas/liblapack to depend on any BLAS/LAPACK
++# alternative, and we want packages depending on ATLAS-specific libraries
++# (e.g. libatlas.so) to depend specifically on libatlas3-base.
++#
++# Such a setting is not supported by dh_makeshlibs, so we ship a hand-crafted
++# shlibs file.
++execute_after_dh_makeshlibs-arch:
++ cp debian/libatlas3-base.shlibs debian/libatlas3-base/DEBIAN/shlibs
++ if test -f libptcblas.so; then echo "libptcblas 3 libatlas3-base" >> debian/libatlas3-base/DEBIAN/shlibs; fi
++ if test -f libptf77blas.so; then echo "libptf77blas 3 libatlas3-base" >> debian/libatlas3-base/DEBIAN/shlibs; fi
++
++override_dh_shlibdeps-arch:
++ dh_shlibdeps -a -l $$(pwd)
++
++override_dh_auto_clean:
++ rm -rf build
++ rm -f TexDoc/*.pdf
++ rm -f debian/blas-atlas.pc debian/lapack-atlas.pc
++ rm -f *.a *.so *.so.*
++
++execute_after_dh_clean:
++ rm -f $(GENERATED_DEBIAN_FILES)
--- /dev/null
--- /dev/null
++3.0 (quilt)
--- /dev/null
--- /dev/null
++debian/archdefs/amd64/x86SSE264SSE2.tar.bz2
++debian/archdefs/arm/GENERIC32.tar.bz2
++debian/archdefs/arm/GENERIC32FPV3D16MAC.tar.bz2
++debian/archdefs/arm64/GENERIC64.tar.bz2
++debian/archdefs/i386/x86x8732.tar.bz2
++debian/archdefs/ia64/IA64Itan64.tar.bz2
++debian/archdefs/m68k/GENERIC32.tar.bz2
++debian/archdefs/mipsel/GENERIC32.tar.bz2
++debian/archdefs/mips64el/GENERIC64.tar.bz2
++debian/archdefs/powerpc/GENERIC32.tar.bz2
++debian/archdefs/ppc64/GENERIC64.tar.bz2
++debian/archdefs/ppc64el/POWER864LE.tar.bz2
++debian/archdefs/riscv64/GENERIC64.tar.bz2
++debian/archdefs/s390x/IBMz964.tar.bz2
++debian/archdefs/s390x/IBMz1264.tar.bz2
++debian/archdefs/sparc64/GENERIC64.tar.bz2
--- /dev/null
--- /dev/null
++Bug-Database: https://sourceforge.net/p/math-atlas/support-requests/
++Bug-Submit: https://sourceforge.net/p/math-atlas/support-requests/new/
++FAQ: http://math-atlas.sourceforge.net/faq.html
--- /dev/null
--- /dev/null
++version=4
++opts=dversionmangle=s/\+ds$//,oversionmangle=s/(.*)/$1+ds/ \
++https://sf.net/math-atlas/atlas(\d.*)\.tar\.bz2 debian debian/orig-tar.sh
++
projects / atlas.git / commitdiff