[changes brought forward from 1.15.1+dfsg1-1~exp3+rpi1 by Peter Michael Green <plugwash@raspbian.org> at Wed, 15 Mar 2017 10:16:18 +0000]
* Fix clean target.
* Build for armv6.
* Manually fixup "install" step so that only armv6 stuff ends up
in the resulting packages.
[dgit import unpatched rustc 1.16.0+dfsg1-1+rpi1]
--- /dev/null
--- /dev/null
++Shared libraries
++================
++
++For now, the shared libraries of Rust are private.
++The rational is the following:
++ * Upstream prefers static linking for now
++ - https://github.com/rust-lang/rust/issues/10209
++ * rust is still under heavy development. As far as we know, there is
++ no commitement from upstream to provide a stable ABI for now.
++ Until we know more, we cannot take the chance to have Rust-built packages
++ failing at each release of the compiler.
++ * Static builds are working out of the box just fine
++ * However, LD_LIBRARY_PATH has to be updated when -C prefer-dynamic is used
++
++ -- Sylvestre Ledru <sylvestre@debian.org>, Fri, 13 Feb 2015 15:08:43 +0100
++
++Building from source
++====================
++
++By default, the Debian rustc package will use the system rustc to bootstrap
++itself from. The system rustc has to be either the previous or the same version
++as the rustc being built; the build will fail if this is not the case.
++
++ apt-get source --compile rustc
++
++Alternatively, you may give the "pkg.rustc.dlstage0" DEB_BUILD_PROFILE to
++instead use the process defined by Rust upstream. This downloads the "official"
++stage0 compiler for the version being built from rust-lang.org. At the time of
++writing "official" means "the previous stable version".
++
++ apt-get source --compile --build-profiles=pkg.rustc.dlstage0 rustc
++
++If neither of these options are acceptable to you, (e.g. because your build
++process cannot access the network), see the below sections on "Bootstrapping"
++for more options.
++
++Bootstrapping a new distro
++==========================
++
++If you want to bootstrap a new distro that does not already have rustc, you
++may run `debian/rules source_orig-dl` to create a .dsc that does not
++Build-Depend on rustc. Instead, it includes an extra orig-dl source tarball
++that contains the official stage0 compiler, pre-downloaded from rust-lang.org
++so that your build daemons don't need to access the network during the build.
++
++ debian/rules source_orig-dl
++ sbuild ../rustc_*.dsc
++
++To only bootstrap specific architectures, run this instead:
++
++ upstream_bootstrap_arch="arm64 armel armhf" debian/rules source_orig-dl
++
++This way, other architectures will be omitted from the orig-dl tarball. You
++might want to do this e.g. if these other architectures are already present in
++your distro, but the $upstream_bootstrap_arch ones are not yet present.
++
++Notes
++-----
++
++The approach here is based on doing a *source-only upload*, where the building
++of the binary packages are done by automatic build daemons. We achieve this, by
++bundling the upstream bootstrapping binaries inside the Debian source package.
++This is a nasty hack that stretches the definition of "source package", but is
++unavoidable if we want to securely bootstrap self-hosted compilers.
++
++This differs from the traditional Debian way of bootstrapping compilers, which
++involves locally building a "stage0" Debian package using upstream binaries
++(instead of Debian build dependencies that don't yet exist), then using this
++stage0 Debian package to do a "standard" build that then forms part of a binary
++upload. This allows the source package to remain binary-free. However, both the
++original stage0 package and upstream binaries are lost, and Debian currently
++does not have any policy nor infrastructure that can try to reproduce what the
++uploader supposedly did.
++
++The advantage of our (non-traditional) approach is that anyone can download
++this source package if they want to build the binaries themselves - they can
++just follow the same automatic build processes that apply to every other Debian
++package. If the build process is reproducible [1] then they can be sure that
++*you* (as the Debian Developer that prepared the source-only upload) didn't
++backdoor the binaries, nor did the automatic build daemons even if they were
++compromised during the build.
++
++(The upstream binaries contained in the orig-dl tarball may still have been
++backdoored. However, this is true in both scenarios - our arrangement is still
++a strict improvement in security, because it reduces the set of "things that
++may have been backdoored". Furthermore, more people use the upstream binaries,
++so presumably any backdoors would be noticed more quickly.)
++
++In the future, both approaches are unifiable into a single secure process, as
++long as:
++
++1. We can trace the binaries that were *actually used* in the original
++ bootstrapping event.
++2. We can optionally *choose* to use a different bootstrapping binary, such as
++ an independently-written rustc.
++3. We have a unified well-defined process for both (1) or (2), that applies to
++ all bootstrapped packages (not just rustc). "Well-defined" means that it can
++ be automated by a program, and it can verify that both options result in the
++ same binary outputs (after the stage2 compilation step).
++
++This is otherwise known as Diverse Double-Compilation.
++
++[1] https://github.com/rust-lang/rust/issues/34902
++[2] http://www.dwheeler.com/trusting-trust/
++
++Bootstrapping a new architecture
++================================
++
++Compiling from upstream releases
++--------------------------------
++
++See the previous section, "Bootstrapping a new distro", specifically the part
++about how to "only bootstrap specific architectures".
++
++For Debian, we should be able to support armhf soon:
++
++Complete: armhf https://github.com/rust-lang/rust/issues/35590
++In-progress: ppc64, ppc64el, s390x: https://github.com/rust-lang/rust/issues/36006
++In-progress: mips, mipsel, mips64el: https://github.com/rust-lang/rust/issues/36015
++
++Cross-compiling from Debian packages
++------------------------------------
++
++WARNING: This does not work yet
++
++0. Start with rust installed on an existing platform
++
++1. Build a rust cross-compiler targeting new architecture
++
++ sudo apt-get build-dep --build-profile=nodoc rustc
++ dpkg-buildpackage -t $new_arch
++
++2. Use cross-compiler to build a compiler that runs on new architecture
++
++ dpkg --add-architecture $new_arch
++ sudo apt-get build-dep --host-architecture=$new_arch rustc
++ dpkg-buildpackage -a $new_arch
++
++ # Perhaps this is sufficient ??
++ #apt-get source --compile --host-architecture=$new_arch rustc
++
++ -- Angus Lees <gus@debian.org>, Sun, 1 Feb 2015 16:16:44 +1100
--- /dev/null
--- /dev/null
++Document by Luca Bruno & Sylvestre Ledru
++
++This source package is unfortunately quite tricky and with
++several cutting edges, due to the complexity of rust-lang
++bootstrapping system and the high rate of language changes
++still ongoing.
++
++We try to describe here inner packaging details and the
++reasons behind them.
++
++
++Embedded libraries
++==================
++
++This source package embeds several external libraries (foeked and managed
++by rust upstream as git submodules).
++In early stages, many more libraries were forked/emebedded but we are steadily
++progressing in splitting them out.
++
++Here below the remaining ones, with the technical reasons.
++
++ * jemalloc from https://github.com/rust-lang/jemalloc
++ -> system-wide one can't be used due to rust using a "je_" prefix.
++
++ This is intentional upstream design and won't change soon, see:
++ - https://github.com/rust-lang/rust/pull/18678
++ - http://smallcultfollowing.com/babysteps/blog/2014/11/14/allocators-in-rust/
++
++ * compiler-rt from https://github.com/rust-lang/compiler-rt
++ -> system-wide compiler-rt fails during linkage
++
++ Bug reported upstream, still to be fixed, see:
++ - https://github.com/rust-lang/rust/issues/15054
++ - https://github.com/rust-lang/rust/issues/15708
++
++As a summary, we plan to:
++ * keep embedding jemalloc (probably forever)
++ * work with upstream to fix compiler-rt linkage soon.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 27 Mar 2015 14:27:12 +0100
++
--- /dev/null
--- /dev/null
++Later:
++
++ * Try to investigate the 1 hour vs 7 hour build time difference we saw between
++ git diff debian/1.13.0+dfsg1-2..debian/1.14.0+dfsg1-1 -- debian
++
++<eddyb> infinity0: LLVM [in Rust]?
++<eddyb> infinity0: ./configure --enable-debug has this annoying detail that nobody has fixed yet, that it disabled optimizations
++<eddyb> so you always have to add --enable-optimize or something like that to counteract the negative effect
++<eddyb> unoptimized rustc is *very* slow, in fact it's my sole guess for 7 hours, assuming you didn't just simply lose 8x parallelism or something
++
++<eddyb> infinity0: -Z time-passes between two different compilers, on the same test, would also be pretty revealing
++<eddyb> infinity0: also try timing the entire compile-fail test run between stage1/bin/rustc and stage2/bin/rustc (the latter is what running tests uses by default)
++<eddyb> infinity0: in the old thing [pre-rustbuild makefiles] it's... make check-stage1-cfail, I think
++
++Older backlog:
++
++ * Use Compiler-rt package
++ * Improve the bootstrap (do the local build first on our systems, upload
++ to Debian and use the packages)
++ * Port on other archs
++ * Create a runtime package (rust-runtime)
++ * Move the runtime library into a public directory
++ * Package the various editors plugins (emacs, kate & vim)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 20 Jan 2015 08:50:28 +0100
--- /dev/null
--- /dev/null
++# Used for testing architecture.mk, and for make_orig-dl_tarball.sh.
++# Not for end users.
++#
++# Usage:
++# $ make -s --no-print-directory -f debian/architecture-test.mk rust-for-deb_arm64
++# arm64 aarch64-unknown-linux-gnu
++
++include debian/architecture.mk
++
++deb_arch_setvars = $(foreach var,ARCH ARCH_OS ARCH_CPU ARCH_BITS ARCH_ENDIAN GNU_CPU GNU_SYSTEM GNU_TYPE MULTIARCH,\
++ $(eval DEB_$(1)_$(var) = $(shell dpkg-architecture -a$(1) -qDEB_HOST_$(var) 2>/dev/null)))
++
++rust-for-deb_%:
++ $(eval $(call deb_arch_setvars,$*))
++ $(eval $(call rust_type_setvar,DEB_$*))
++ @echo $(DEB_$(*)_ARCH) $(DEB_$(*)_RUST_TYPE)
--- /dev/null
--- /dev/null
++# This Makefile snippet defines DEB_*_RUST_TYPE triples based on DEB_*_GNU_TYPE
++
++include /usr/share/dpkg/architecture.mk
++
++rust_cpu = $(subst i586,i686,$(1))
++rust_type_setvar = $(1)_RUST_TYPE ?= $(call rust_cpu,$($(1)_GNU_CPU),$($(1)_ARCH))-unknown-$($(1)_GNU_SYSTEM)
++
++$(foreach machine,BUILD HOST TARGET,\
++ $(eval $(call rust_type_setvar,DEB_$(machine))))
++
++# fallback for older dpkg versions
++ifeq ($(DEB_TARGET_RUST_TYPE),-unknown-)
++ DEB_TARGET_RUST_TYPE = $(DEB_HOST_RUST_TYPE)
++endif
--- /dev/null
--- /dev/null
++#!/bin/sh
++# TODO(infinity0): this can be removed when antlr4 provide this as a convenience script
++# See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=814253 for details.
++# Don't forget to update override_dh_auto_configure when you remove it.
++exec java -cp /usr/share/java/antlr4.jar:/usr/share/java/antlr4-runtime.jar org.antlr.v4.gui.TestRig "$@"
--- /dev/null
--- /dev/null
++#!/bin/sh
++# Build a Debian source package out of an existing unpacked rustc deb source,
++# and the official rust preview releases.
++#
++# infinity0 occasionally makes, builds and uploads them here:
++# https://launchpad.net/~infinity0/+archive/ubuntu/rust-nightly
++# https://launchpad.net/~infinity0/+archive/ubuntu/rust-beta
++
++# You can set these env vars to tweak the behaviour of this script.
++CHANNEL="${CHANNEL:-beta}" # either beta or nightly
++DIST="${DIST:-experimental}" # which suite to put in debian/changelog
++DEBDIR="${DEBDIR:-}" # where is the debian/ directory? defaults to this script
++NOREMOTE="${NOREMOTE:-false}" # e.g. if you have already downloaded all necessary files
++# note that we already use "wget -N" to avoid redundant downloads
++NOCLOBBER="${NOCLOBBER:-true}" # don't rebuild if we already have the .dsc
++DPUT_HOST="${DPUT_HOST}" # optional host dput the resulting .dsc to
++ARCHES="amd64 arm64 i386"
++
++do_temporary_fixups() {
++# patches needed to subsequent versions go here
++local verprefix="${1%.0-beta.?}"
++verprefix="${verprefix%.0-nightly}"
++( cd debian/patches
++local f
++for f in *; do
++ fb="${f%.patch}"
++ fb="${fb%.diff}"
++ # if an updated patch exists, use it
++ if test -f "${fb}_${verprefix}"*; then mv "${fb}_${verprefix}"* "$f"; fi
++done )
++case "$1" in
++"1.14."*|"1.15."*)
++ dquilt delete ignore-stdcall-test-on-arm64.patch
++ ;;
++esac
++}
++
++abort() { local x="$1"; shift; echo >&2 "$@"; exit "$x"; }
++
++dquilt() {
++ QUILT_PATCHES="debian/patches" \
++ QUILT_PATCH_OPTS="--reject-format=unified" \
++ QUILT_DIFF_ARGS="-p ab --no-timestamps --no-index --color=auto" \
++ QUILT_REFRESH_ARGS="-p ab --no-timestamps --no-index" \
++ quilt "$@"
++}
++
++HOST="https://static.rust-lang.org"
++BASENAME="rustc-$CHANNEL-src.tar.gz"
++JQUERY="https://code.jquery.com/jquery-2.1.4.js"
++
++SCRIPTDIR="$(dirname "$0")"
++DEBDIR="$(readlink -f ${DEBDIR:-$SCRIPTDIR})"
++echo "using DEBDIR=$DEBDIR as debian tree to copy into upstream tarball"
++test "$PWD" = "${PWD#$DEBDIR}" || abort 1 "must run from outside DEBDIR"
++test -d "$DEBDIR" || abort 1 "DEBDIR not a directory: $DEBDIR"
++
++set -x
++set -e
++
++$NOREMOTE || wget -N "$HOST/dist/$BASENAME"
++$NOREMOTE || wget -N "$HOST/dist/$BASENAME.asc"
++$NOREMOTE || gpg2 -v "$BASENAME.asc"
++$NOREMOTE || wget -N "$HOST/dist/index.txt"
++MODDATE1="$(grep "^/dist/$BASENAME," index.txt \
++ | cut -d, -f3 | sed -e 's/\(.*\)-\(.*\)-\(.*\)T.*/\1\2\3/')"
++MODDATE2="$(TZ=UTC stat "$BASENAME" -c %y | sed -e 's/\(.*\)-\(.*\)-\([0-9]*\) .*$/\1\2\3/')"
++$NOREMOTE || test "$MODDATE1" = "$MODDATE2" || abort 2 "file mod times don't match, try again"
++$NOREMOTE || wget -N "$JQUERY"
++
++rm -rf "rustc-$CHANNEL"
++tar xf "$BASENAME"
++
++cd "rustc-$CHANNEL"
++{
++ echo "CFG_RELEASE_CHANNEL=$CHANNEL"
++ echo "CFG_HASH_COMMAND=md5sum | cut -c1-8"
++ sed -n -e '/^CFG_RELEASE/,/^##/{/^CFG_INFO/d;p}' mk/main.mk
++ echo "all:"
++ echo " @echo export CFG_RELEASE=\$(CFG_RELEASE)"
++} | make -f - > ./envvars
++. ./envvars
++NEWUPSTR="$(echo "$CFG_RELEASE.$MODDATE2+dfsg1" | sed -e 's/-beta/~beta/' -e 's/-nightly/~~nightly/')"
++if $NOCLOBBER && test -f "../rustc_$NEWUPSTR-1.dsc"; then
++ cd ..
++ rm -rf "rustc-$CHANNEL"
++ abort 0 "already have rustc_$NEWUPSTR-1.dsc; set NOCLOBBER=false if you want to force"
++fi
++cp -a "$DEBDIR" .
++mk-origtargz --repack --compression xz -v "$NEWUPSTR" "../$BASENAME"
++cd ..
++
++rm -rf "rustc-$CHANNEL" "rustc-$NEWUPSTR"
++tar xf "rustc_$NEWUPSTR.orig.tar.xz"
++mv "rustc-$CHANNEL" "rustc-$NEWUPSTR"
++
++libstd_ver() {
++ dpkg-parsechangelog --show-field Version | sed -re 's/([^.]+)\.([^.]+)\..*/\1.\2/'
++}
++
++cd "rustc-$NEWUPSTR"
++cp -a "$DEBDIR" .
++
++OLD_LIBVER="$(libstd_ver)"
++dch -D "$DIST" -v "$NEWUPSTR-1" "Team upload."
++dch -a "Switch to $CHANNEL channel."
++NEW_LIBVER="$(libstd_ver)"
++do_temporary_fixups "$CFG_RELEASE"
++mkdir -p ../"dl_${CFG_RELEASE}"
++ln -sf ../"dl_${CFG_RELEASE}" dl
++# TODO: don't do this if orig-dl already exists
++$NOREMOTE || upstream_bootstrap_arch="$ARCHES" debian/rules source_orig-dl
++rm -f dl
++cp -al ../"dl_${CFG_RELEASE}" dl
++# set build-dep arch exceptions
++deb_bd_arch_ex="$(echo "$ARCHES" | sed -e 's/\S*/!\0/g')"
++sed -e 's/rustc (\(.*\))\( *\[\(.*\)\]\)\?/rustc (\1) ['"$deb_bd_arch_ex"']/g' -i debian/control
++
++rm -f debian/missing-sources/jquery-*
++cp "../$(basename "$JQUERY")" debian/missing-sources
++sed -i -e "s/$OLD_LIBVER/$NEW_LIBVER/" "debian/control"
++sed -i -e 's/\(RELEASE_CHANNEL := \)\(.*\)/\1'"$CHANNEL"'/g' debian/rules
++sed -i -e 's/^update .*/update '"$OLD_LIBVER $NEW_LIBVER"'/' debian/update-version.sh
++( cd debian && bash ./update-version.sh )
++
++while dquilt push; do dquilt refresh; done
++dquilt pop -a
++rm -rf .pc
++dpkg-buildpackage -d -S
++cd ..
++
++if test -n "$DPUT_HOST"; then
++ dput "$DPUT_HOST" "rustc_$NEWUPSTR-1_source.changes"
++else
++ set +x
++ echo "Source package built, but there is NO GUARANTEE THAT IT WORKS!"
++ echo "You should now try to build it with \`sudo cowbuilder --build rustc_$NEWUPSTR-1.dsc\`"
++fi
--- /dev/null
--- /dev/null
++rustc (1.16.0+dfsg1-1+rpi1) buster-staging; urgency=medium
++
++ [changes brought forward from 1.15.1+dfsg1-1~exp3+rpi1 by Peter Michael Green <plugwash@raspbian.org> at Wed, 15 Mar 2017 10:16:18 +0000]
++ * Fix clean target.
++ * Build for armv6.
++ * Manually fixup "install" step so that only armv6 stuff ends up
++ in the resulting packages.
++
++ -- Peter Michael Green <plugwash@raspbian.org> Sat, 08 Jul 2017 23:35:25 +0000
++
++rustc (1.16.0+dfsg1-1) unstable; urgency=medium
++
++ * Upload to unstable so we have something to build 1.17 with.
++ * Update u-ignoretest-powerpc.patch for 1.16.
++
++ -- Ximin Luo <infinity0@debian.org> Wed, 19 Apr 2017 22:47:18 +0200
++
++rustc (1.16.0+dfsg1-1~exp2) experimental; urgency=medium
++
++ * Don't ignore test failures on Debian unstable.
++ * Re-fix ignoring armhf test, accidentally reverted in previous version.
++ * Try to fix buildd failure by swapping B-D alternatives.
++
++ -- Ximin Luo <infinity0@debian.org> Sun, 16 Apr 2017 15:05:47 +0200
++
++rustc (1.16.0+dfsg1-1~exp1) experimental; urgency=medium
++
++ * New upstream release
++ * u-ignoretest-jemalloc.patch removed (applied upstream)
++
++ [ Matthias Klose ]
++ * Bootstrap using the rustc version in the archive, on all architectures.
++ * Work around a GCC 4.8 ICE on AArch64.
++ * Use alternative build dependencies on cmake3 and binutils-2.26 for
++ builds on 14.04 LTS (trusty).
++ * debian/make_orig*dl_tarball.sh: Include all Ubuntu architectures.
++ * debian/rules: Ignore test results for now.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 13 Apr 2017 15:24:03 +0200
++
++rustc (1.15.1+dfsg1-1) unstable; urgency=medium
++
++ * Upload to unstable so we have something to build 1.16 with.
++ * Try to fix ignoring atomic-lock-free tests on armhf.
++
++ -- Ximin Luo <infinity0@debian.org> Wed, 22 Mar 2017 00:13:27 +0100
++
++rustc (1.15.1+dfsg1-1~exp3) experimental; urgency=medium
++
++ * Ignore atomic-lock-free tests on armhf.
++ * Update ignoretest-armhf_03.patch for newer 1.15.1 behaviour.
++ * Tidy up some other patches to do with ignoring tests.
++
++ -- Ximin Luo <infinity0@debian.org> Sun, 12 Mar 2017 04:15:33 +0100
++
++rustc (1.15.1+dfsg1-1~exp2) experimental; urgency=medium
++
++ * Update armhf ignoretest patch.
++ * Bootstrap armhf. (Closes: #809316, #834003)
++ * Bootstrap ppc4el. (Closes: #839643)
++ * Fix rust-lldb symlink. (Closes: #850639)
++
++ -- Ximin Luo <infinity0@debian.org> Thu, 02 Mar 2017 23:01:26 +0100
++
++rustc (1.15.1+dfsg1-1~exp1) experimental; urgency=medium
++
++ * New upstream release (won't probably be in stretch).
++ see the 1.4 git branch for the follow up for stable
++ * Call to the test renamed from check-notidy => check
++ * d/p/u-destdir-support.diff: Apply upstream patch to support
++ destdir in the make install (for rustbuild, in later versions)
++ * Overrides the 'binary-or-shlib-defines-rpath' lintian warnings.
++ We need them for now
++ * Refresh of the patches
++
++ [ Sven Joachim ]
++ * Drop Pre-Depends on multiarch-support. (Closes: #856109)
++
++ [ Erwan Prioul ]
++ * Fix test and build failures for ppc64el. (Closes: #839643)
++
++ [ Ximin Luo ]
++ * Disable rustbuild for the time being (as it was in 1.14) and instead
++ bootstrap two new arches, armhf and ppc64el.
++ * Switch back to debhelper 9 to make backporting easier.
++ * Switch Build-Depends on binutils-multiarch back to binutils, the former is
++ no longer needed by the upstream tests.
++
++ [ Matthias Klose ]
++ * Compatibility fixes and improvements to help work better on Ubuntu.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 26 Feb 2017 21:12:27 +0100
++
++rustc (1.14.0+dfsg1-3) unstable; urgency=medium
++
++ * Fix mips64 Makefile patches.
++ * Don't run arch-dep tests in a arch-indep build.
++
++ -- Ximin Luo <infinity0@debian.org> Wed, 04 Jan 2017 21:34:56 +0100
++
++rustc (1.14.0+dfsg1-2) unstable; urgency=medium
++
++ * Update README.Debian, the old one was way out of date.
++ * Detect mips CPUs in ./configure and fill in mips Makefile rules.
++ * Work around jemalloc-related problems in the upstream bootstrapping
++ binaries for arm64, ppc64el, s390x.
++ * Disable jemalloc on s390x - upstream already disable it for some other
++ arches.
++ * Disable jemalloc tests for arches where jemalloc is disabled.
++ * We still expect the following failures:
++ * arm64 should be fixed (i.e. no failures) compared to the previous upload.
++ * armhf will FTBFS due to 'Illegal instruction' and this can only be fixed
++ with the next stable rustc release.
++ * mips mipsel mips64el ppc64 ppc64el s390x will FTBFS due to yet other
++ test failures beyond the ones I fixed above; this upload is only to save
++ me manual work in producing nice reports that exhibit these failures.
++
++ -- Ximin Luo <infinity0@debian.org> Thu, 29 Dec 2016 23:00:47 +0100
++
++rustc (1.14.0+dfsg1-1) unstable; urgency=medium
++
++ [ Sylvestre Ledru ]
++ * New upstream release
++ * Update debian/watch
++
++ [ Ximin Luo ]
++ * Try to bootstrap armhf ppc64 ppc64el s390x mips mipsel mips64el.
++ (Closes: #809316, #834003, #839643)
++ * Make rust-gdb and rust-lldb arch:all packages.
++ * Switch to debhelper 10.
++
++ -- Ximin Luo <infinity0@debian.org> Sat, 24 Dec 2016 18:03:03 +0100
++
++rustc (1.13.0+dfsg1-2) unstable; urgency=high
++
++ * Skip macro-stepping test on arm64, until
++ https://github.com/rust-lang/rust/issues/37225 is resolved.
++
++ -- Luca Bruno <lucab@debian.org> Sat, 26 Nov 2016 23:40:14 +0000
++
++rustc (1.13.0+dfsg1-1) unstable; urgency=medium
++
++ [ Sylvestre Ledru ]
++ * New upstream release.
++
++ [ Ximin Luo ]
++ * Use Debian system jquery instead of upstream's embedded copy.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 11 Nov 2016 13:35:23 +0100
++
++rustc (1.12.1+dfsg1-1) unstable; urgency=medium
++
++ [ Sylvestre Ledru ]
++ * New (minor) upstream release
++ * Missing dependency from rust-lldb to python-lldb-3.8 (Closes: #841833)
++ * Switch to llvm 3.9. (Closes: #841834)
++
++ [ Ximin Luo ]
++ * Dynamically apply rust-boot-1.12.1-from-1.12.0.diff.
++ This allows us to bootstrap from either 1.11.0 or 1.12.0.
++ * Bump LLVM Build-Depends version to get the backported patches for LLVM
++ #30402 and #29163.
++ * Install debugger_pretty_printers_common to rust-gdb and rust-lldb.
++ (Closes: #841835)
++
++ -- Ximin Luo <infinity0@debian.org> Mon, 07 Nov 2016 14:15:14 +0100
++
++rustc (1.12.0+dfsg1-2) unstable; urgency=medium
++
++ * Ignore test run-make/no-duplicate-libs. Fails on i386
++ * Ignore test run-pass-valgrind/down-with-thread-dtors.rs . Fails on arm64
++ * I am not switching to llvm 3.9 now because a test freezes. The plan is
++ to silent the warning breaking the build and upload 1.12.1 after
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 05 Oct 2016 10:48:01 +0200
++
++rustc (1.12.0+dfsg1-1) unstable; urgency=medium
++
++ * new upstream release
++ - Rebase of the patches and removal of deprecated patches
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 29 Sep 2016 20:45:04 +0200
++
++rustc (1.11.0+dfsg1-3) unstable; urgency=medium
++
++ * Fix separate build-arch and build-indep builds.
++
++ -- Ximin Luo <infinity0@debian.org> Tue, 13 Sep 2016 12:30:41 +0200
++
++rustc (1.11.0+dfsg1-2) unstable; urgency=medium
++
++ * Fix rebuilding against the current version, by backporting a patch I wrote
++ that was already applied upstream. Should fix the FTBFS that was observed
++ by tests.reproducible-builds.org.
++ * Ignore a failing stdcall test on arm64; should fix the FTBFS there.
++ * Backport a doctest fix I wrote, already applied upstream.
++
++ -- Ximin Luo <infinity0@debian.org> Mon, 12 Sep 2016 17:40:12 +0200
++
++rustc (1.11.0+dfsg1-1) unstable; urgency=medium
++
++ * New upstream release
++ * Add versioned binutils dependency. (Closes: #819475, #823540)
++
++ -- Ximin Luo <infinity0@debian.org> Wed, 07 Sep 2016 10:31:57 +0200
++
++rustc (1.10.0+dfsg1-3) unstable; urgency=medium
++
++ * Rebuild with LLVM 3.8, same as what upstream are using
++ * Dynamically link against LLVM. (Closes: #832565)
++
++ -- Ximin Luo <infinity0@debian.org> Sat, 30 Jul 2016 22:36:41 +0200
++
++rustc (1.10.0+dfsg1-2) unstable; urgency=medium
++
++ * Tentatively support ARM architectures
++ * Include upstream arm64,armel,armhf stage0 compilers (i.e. 1.9.0 stable)
++ in a orig-dl tarball, like how we previously did for amd64,i386.
++
++ -- Ximin Luo <infinity0@debian.org> Fri, 22 Jul 2016 15:54:51 +0200
++
++rustc (1.10.0+dfsg1-1) unstable; urgency=medium
++
++ * New upstream release
++ * Add myself to uploaders
++ * Update our build process to bootstrap from the previous Debian rustc stable
++ version by default. See README.Debian for other options.
++ * Update to latest Standards-Version; no changes required.
++
++ -- Ximin Luo <infinity0@debian.org> Sun, 17 Jul 2016 03:40:49 +0200
++
++rustc (1.9.0+dfsg1-1) unstable; urgency=medium
++
++ * New upstream release (Closes: #825752)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 29 May 2016 17:57:38 +0200
++
++rustc (1.8.0+dfsg1-1) unstable; urgency=medium
++
++ * New upstream release
++
++ [ Ximin Luo ]
++ * Fix using XZ for the orig tarball: needs explicit --repack in debian/watch
++ * Drop wno-error patch; applied upstream.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 15 Apr 2016 12:01:45 +0200
++
++rustc (1.7.0+dfsg1-1) unstable; urgency=medium
++
++ * New upstream release
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 03 Mar 2016 22:41:24 +0100
++
++rustc (1.6.0+dfsg1-3) unstable; urgency=medium
++
++ * Apply upstream fix to silent a valgrind issue in the test suite
++ (Closes: ##812825)
++ * Add gcc & libc-dev as dependency of rustc to make sure it works
++ out of the box
++
++ [ Ximin Luo ]
++ * Work around rust bug https://github.com/rust-lang/rust/issues/31529
++ * Enable optional tests, and add verbosity/backtraces to tests
++ * Use XZ instead of GZ compression (will apply to the next new upload)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 02 Feb 2016 15:08:11 +0100
++
++rustc (1.6.0+dfsg1-2) unstable; urgency=medium
++
++ * mk/rt.mk: Modify upstream code to append -Wno-error rather than trying
++ to remove the string "-Werror". (Closes: #812448)
++ * Disable new gcc-6 "-Wmisleading-indentation" warning, which triggers
++ (incorrectly) on src/rt/miniz.c. (Closes: #811573)
++ * Guard arch-dependent dh_install commands appropriately, fixing
++ arch-indep-only builds. (Closes: #809124)
++
++ -- Angus Lees <gus@debian.org> Tue, 26 Jan 2016 05:40:14 +1100
++
++rustc (1.6.0+dfsg1-1) unstable; urgency=medium
++
++ * new upstream release
++
++ [ Ximin Luo ]
++ * Use secure links for Vcs-* fields.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 22 Jan 2016 10:56:08 +0100
++
++rustc (1.5.0+dfsg1-1) unstable; urgency=medium
++
++ * New upstream release
++ - We believe that we should let rust transit to testing
++ (Closes: #786836)
++ * Move away from hash to the same rust naming schema
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 10 Dec 2015 17:23:32 +0100
++
++rustc (1.4.0+dfsg1-1) unstable; urgency=medium
++
++ * New upstream release
++ 198068b3 => 1bf6e69c
++ * Update the download url in debian/watch
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 30 Oct 2015 09:36:02 +0100
++
++rustc (1.3.0+dfsg1-1) unstable; urgency=medium
++
++ * New upstream release
++ 62abc69f => 198068b3
++ * jquery updated from 2.1.0 to 2.1.4
++
++ [ Ximin Luo ]
++ * Use LLVM 3.7 as upstream does, now that it's released. (Closes: #797626)
++ * Fix debian/copyright syntax mistakes.
++ * Don't Replace/Break previous versions of libstd-rust-*
++ * Check that the libstd-rust-* name in d/control matches upstream.
++ * Several other minor build tweaks.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 19 Sep 2015 14:39:35 +0200
++
++rustc (1.2.0+dfsg1-1) unstable; urgency=medium
++
++ * New upstream release
++ libstd-rust-7d23ff90 => libstd-rust-62abc69f
++ * Add llvm-3.6-tools to the build dep as it is
++ now needed for tests
++ * Fix the Vcs-Browser value
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 08 Aug 2015 23:13:44 +0200
++
++rustc (1.1.0+dfsg1-3) unstable; urgency=medium
++
++ * rust-{gdb,lldb} now Replaces pre-split rustc package.
++ Closes: #793433.
++ * Several minor lintian cleanups.
++
++ -- Angus Lees <gus@debian.org> Fri, 24 Jul 2015 17:47:48 +1000
++
++rustc (1.1.0+dfsg1-2) unstable; urgency=medium
++
++ [ Angus Lees ]
++ * Replace remote Rust logo with local file in HTML docs.
++ * Symlink rust-{gdb,lldb}.1 to {gdb,lldb}.1 manpages.
++ Note that gdb.1 requires the gdb-doc package, and that lldb.1 doesn't
++ exist yet (see #792908).
++ * Restore "Architecture: amd64 i386" filter, mistakenly removed in
++ previous version. Unfortunately the toolchain bootstrap isn't ready
++ to support all Debian archs yet. Closes: #793147.
++
++ -- Angus Lees <gus@debian.org> Wed, 22 Jul 2015 09:51:08 +1000
++
++rustc (1.1.0+dfsg1-1) unstable; urgency=low
++
++ [ Angus Lees ]
++ * Set SONAME when building dylibs
++ * Split out libstd-rust, libstd-rust-dev, rust-gdb, rust-lldb from rustc
++ - libs are now installed into multiarch-friendly locations
++ - rpath is no longer required to use dylibs (but talk to Debian Rust
++ maintainers before building a package that depends on the dylibs)
++ * Install /usr/share/rustc/architecture.mk, which declares Rust arch
++ triples for Debian archs and is intended to help future Rust packaging
++ efforts. Warning: it may not be complete/accurate yet.
++ * New upstream release (1.1)
++
++ -- Angus Lees <gus@debian.org> Thu, 16 Jul 2015 14:23:47 +1000
++
++rustc (1.0.0+dfsg1-1) unstable; urgency=medium
++
++ [ Angus Lees ]
++ * New upstream release (1.0!)
++
++ [ Sylvestre Ledru ]
++ * Fix the watch file
++ * Update of the repack to remove llvm sources
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 16 May 2015 08:24:32 +1000
++
++rustc (1.0.0~beta.4-1~exp1) experimental; urgency=low
++
++ [ Angus Lees ]
++ * New upstream release (beta 3)
++ - Drop manpage patch - now included upstream
++ * Replace duplicated compile-time dylibs with symlinks to run-time libs
++ (reduces installed size by ~68MB)
++
++ [ Sylvestre Ledru ]
++ * New upstream release (beta 4)
++ * Replace two more occurrences of jquery by the package
++ * Repack upstream to remove an LLVM file with a non-DFSG license
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 06 May 2015 11:14:30 +0200
++
++rustc (1.0.0~alpha.2-1~exp1) experimental; urgency=low
++
++ [ Angus Lees ]
++ * Patch upstream manpages to address minor troff issues
++ * Make 'debian/rules clean' also clean LLVM source
++ * Rename primary 'rust' binary package to 'rustc'
++ * Fix potential FTBFS: rust-doc requires texlive-fonts-recommended (for
++ pzdr.tfm)
++ * Build against system LLVM
++
++ [ Sylvestre Ledru ]
++ * New testing release
++ * Renaming of the source package
++ * Set a minimal version for dpkg-dev and debhelper (for profiles)
++ * For now, disable build profiles as they are not supported in Debian
++ * Introduce some changes by Angus Lees
++ - Introduction of build stages
++ - Disable the parallel execution of tests
++ - Improving of the parallel syntax
++ - Use override_dh_auto_build-arch
++ - Use override_dh_auto_build-indep
++ - Better declarations of the doc
++ - Update of the description
++ - Watch file updated (with key check)
++
++ [ Luca Bruno ]
++ * rules: respect 'nocheck' DEB_BUILD_OPTIONS
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 07 Mar 2015 09:25:47 +0100
++
++rust (1.0.0~alpha-0~exp1) experimental; urgency=low
++
++ * Initial package (Closes: #689207)
++ Work done by Luca Bruno, Jordan Justen and Sylvestre Ledru
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 23 Jan 2015 15:47:37 +0100
--- /dev/null
--- /dev/null
++9
--- /dev/null
--- /dev/null
++Source: rustc
++Section: devel
++Priority: extra
++Maintainer: Rust Maintainers <pkg-rust-maintainers@lists.alioth.debian.org>
++Uploaders: Jordan Justen <jordan.l.justen@intel.com>,
++ Luca Bruno <lucab@debian.org>,
++ Sylvestre Ledru <sylvestre@debian.org>,
++ Angus Lees <gus@debian.org>,
++ Ximin Luo <infinity0@debian.org>
++Build-Depends: debhelper (>= 9),
++ dpkg-dev (>= 1.17.14),
++ rustc (>= 1.15.0+dfsg) <!pkg.rustc.dlstage0>,
++ rustc (<= 1.16.0++) <!pkg.rustc.dlstage0>,
++ autotools-dev,
++ binutils (>= 2.26) | binutils-2.26,
++ cmake | cmake3,
++ curl,
++ gperf,
++ libedit-dev,
++ llvm-3.9-dev (>= 1:3.9-5),
++ llvm-3.9-tools (>= 1:3.9-5),
++ python,
++ zlib1g-dev,
++ nodejs <!nocheck>,
++ valgrind <!nocheck>,
++ git <!nocheck>,
++ procps <!nocheck>,
++# the tests require the docs to be built, which requires jquery
++ libjs-jquery <!nocheck>,
++# below are optional tools even for 'make check'
++ antlr4 <!nocheck> | antlr <!nocheck>,
++ bison <!nocheck>,
++ flex <!nocheck>,
++# TODO: broken; see https://github.com/rust-lang/rust/issues/39838; re-enable when that is fixed
++# gdb <!nocheck>,
++ default-jdk-headless <!nocheck> | default-jdk <!nocheck>,
++Build-Depends-Indep: libjs-jquery <!nodoc>,
++ pandoc (>= 1.9),
++ po4a,
++ texlive-xetex,
++ texlive-latex-base,
++ texlive-generic-recommended,
++ texlive-fonts-recommended,
++ lmodern
++Standards-Version: 3.9.8
++Homepage: http://www.rust-lang.org/
++Vcs-Git: https://anonscm.debian.org/git/pkg-rust/rust.git
++Vcs-Browser: https://anonscm.debian.org/cgit/pkg-rust/rust.git
++
++Package: rustc
++Architecture: any
++Multi-Arch: foreign
++Pre-Depends: ${misc:Pre-Depends}
++Depends: ${shlibs:Depends}, ${misc:Depends}, libstd-rust-dev (= ${binary:Version}),
++ gcc, libc-dev, libjs-jquery, binutils (>= 2.26)
++Recommends: rust-gdb | rust-lldb
++Suggests: rust-doc
++Description: Rust systems programming language
++ Rust is a curly-brace, block-structured expression language. It
++ visually resembles the C language family, but differs significantly
++ in syntactic and semantic details. Its design is oriented toward
++ concerns of "programming in the large", that is, of creating and
++ maintaining boundaries - both abstract and operational - that
++ preserve large-system integrity, availability and concurrency.
++ .
++ It supports a mixture of imperative procedural, concurrent actor,
++ object-oriented and pure functional styles. Rust also supports
++ generic programming and meta-programming, in both static and dynamic
++ styles.
++
++Package: libstd-rust-1.16
++Section: libs
++Architecture: any
++Multi-Arch: same
++Pre-Depends: ${misc:Pre-Depends}
++Depends: ${shlibs:Depends}, ${misc:Depends}
++Description: Rust standard libraries
++ Rust is a curly-brace, block-structured expression language. It
++ visually resembles the C language family, but differs significantly
++ in syntactic and semantic details. Its design is oriented toward
++ concerns of "programming in the large", that is, of creating and
++ maintaining boundaries - both abstract and operational - that
++ preserve large-system integrity, availability and concurrency.
++ .
++ It supports a mixture of imperative procedural, concurrent actor,
++ object-oriented and pure functional styles. Rust also supports
++ generic programming and meta-programming, in both static and dynamic
++ styles.
++ .
++ This package contains the standard Rust libraries, built as dylibs.
++
++Package: libstd-rust-dev
++Section: libdevel
++Architecture: any
++Multi-Arch: same
++Depends: ${misc:Depends}, libstd-rust-1.16 (= ${binary:Version})
++Description: Rust standard libraries - development files
++ Rust is a curly-brace, block-structured expression language. It
++ visually resembles the C language family, but differs significantly
++ in syntactic and semantic details. Its design is oriented toward
++ concerns of "programming in the large", that is, of creating and
++ maintaining boundaries - both abstract and operational - that
++ preserve large-system integrity, availability and concurrency.
++ .
++ It supports a mixture of imperative procedural, concurrent actor,
++ object-oriented and pure functional styles. Rust also supports
++ generic programming and meta-programming, in both static and dynamic
++ styles.
++ .
++ This package contains development files necessary to use the standard
++ Rust libraries.
++
++Package: rust-gdb
++Architecture: all
++Depends: gdb, ${misc:Depends}
++Suggests: gdb-doc
++Replaces: rustc (<< 1.1.0+dfsg1-1)
++Description: Rust debugger (gdb)
++ Rust is a curly-brace, block-structured expression language. It
++ visually resembles the C language family, but differs significantly
++ in syntactic and semantic details. Its design is oriented toward
++ concerns of "programming in the large", that is, of creating and
++ maintaining boundaries - both abstract and operational - that
++ preserve large-system integrity, availability and concurrency.
++ .
++ It supports a mixture of imperative procedural, concurrent actor,
++ object-oriented and pure functional styles. Rust also supports
++ generic programming and meta-programming, in both static and dynamic
++ styles.
++ .
++ This package contains pretty printers and a wrapper script for
++ invoking gdb on rust binaries.
++
++Package: rust-lldb
++Architecture: all
++# When updating, also update rust-lldb.links
++Depends: lldb-3.9, ${misc:Depends}, python-lldb-3.9
++Replaces: rustc (<< 1.1.0+dfsg1-1)
++Description: Rust debugger (lldb)
++ Rust is a curly-brace, block-structured expression language. It
++ visually resembles the C language family, but differs significantly
++ in syntactic and semantic details. Its design is oriented toward
++ concerns of "programming in the large", that is, of creating and
++ maintaining boundaries - both abstract and operational - that
++ preserve large-system integrity, availability and concurrency.
++ .
++ It supports a mixture of imperative procedural, concurrent actor,
++ object-oriented and pure functional styles. Rust also supports
++ generic programming and meta-programming, in both static and dynamic
++ styles.
++ .
++ This package contains pretty printers and a wrapper script for
++ invoking lldb on rust binaries.
++
++Package: rust-doc
++Section: doc
++Architecture: all
++Build-Profiles: <!nodoc>
++Depends: ${misc:Depends}, libjs-jquery
++Description: Rust systems programming language - Documentation
++ Rust is a curly-brace, block-structured expression language. It
++ visually resembles the C language family, but differs significantly
++ in syntactic and semantic details. Its design is oriented toward
++ concerns of "programming in the large", that is, of creating and
++ maintaining boundaries - both abstract and operational - that
++ preserve large-system integrity, availability and concurrency.
++ .
++ It supports a mixture of imperative procedural, concurrent actor,
++ object-oriented and pure functional styles. Rust also supports
++ generic programming and meta-programming, in both static and dynamic
++ styles.
++ .
++ This package contains the Rust tutorial, language reference and
++ standard library documentation.
--- /dev/null
--- /dev/null
++Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
++Upstream-Name: rust
++Source: http://www.rust-lang.org
++Files-Excluded:
++ src/llvm
++ src/librustdoc/html/static/jquery-*.min.js
++ src/rt/hoedown/src/html_blocks.c
++
++Files: *
++Copyright: 2006-2009 Graydon Hoare
++ 2009-2012 Mozilla Foundation
++ 2012-2015 The Rust Project Developers (see AUTHORS.txt)
++License: Expat or Apache-2.0
++
++Files: src/librustc_trans/cabi_x86_64.rs
++Copyright: 2008-2010 Tachyon Technologies
++License: BSD-2-clause
++
++Files: src/rt/miniz.c
++Copyright: 1996-2012 Rich Geldreich
++License: unlicense
++ This is free and unencumbered software released into the public domain.
++ .
++ Anyone is free to copy, modify, publish, use, compile, sell, or
++ distribute this software, either in source code form or as a compiled
++ binary, for any purpose, commercial or non-commercial, and by any
++ means.
++ .
++ In jurisdictions that recognize copyright laws, the author or authors
++ of this software dedicate any and all copyright interest in the
++ software to the public domain. We make this dedication for the
++ benefit of the public at large and to the detriment of our heirs and
++ successors. We intend this dedication to be an overt act of
++ relinquishment in perpetuity of all present and future rights to this
++ software under copyright law.
++ .
++ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
++ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
++ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
++ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
++ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++ .
++ For more information, please refer to <http://unlicense.org/>
++
++Files: src/jemalloc/*
++Copyright: 2002-2014 Jason Evans <jasone@canonware.com>
++ 2007-2012 Mozilla Foundation
++ 2009-2014 Facebook, Inc.
++License: BSD-2-clause
++
++Files: src/jemalloc/bin/jeprof.in
++Copyright: 1998-2007, Google Inc.
++License: BSD-3-Clause
++
++Files: src/compiler-rt/*
++Copyright: 2009-2015 Howard Hinnant
++ 2009-2015 The CompileRT Developers (see src/compiler-rt/CREDITS.TXT)
++License: BSD-3-clause or Expat
++
++Files: src/compiler-rt/lib/BlocksRuntime/*
++Copyright: 2008-2010 Apple, Inc.
++License: Expat
++
++Files: src/rt/hoedown/*
++Copyright: 2008 Natacha Porté
++ 2011 Vicent MartÃ
++ 2013 Devin Torres and the Hoedown authors
++License: ISC
++
++Files: src/libbacktrace/*
++Copyright: 2012-2014 Free Software Foundation, Inc.
++ (written by Ian Lance Taylor, Google.)
++License: BSD-3-Clause
++
++Files:
++ src/libbacktrace/filenames.h
++ src/libbacktrace/ansidecl.h
++ src/libbacktrace/hashtab.h
++ src/libbacktrace/ltmain.sh
++Copyright: 2000, 2001, 2007, 2010 Free Software Foundation, Inc.
++License: GPL-2+
++
++Files: src/libbacktrace/dwarf2.h
++Copyright: 1992, 1993, 1995, 1996, 1997, 1999, 2000, 2001, 2002,
++ 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
++ Free Software Foundation, Inc.
++License: GPL-3+ with GCC Runtime Library exception
++
++Files: src/librustdoc/html/static/FiraSans*
++Copyright: 2014, Mozilla Foundation, 2014, Telefonica S.A.
++License: SIL-OPEN-FONT
++
++Files: src/librustdoc/html/static/Heuristica*
++Copyright: 1989, 1991 Adobe Systems Incorporated,
++ 2006 Han The Thanh, Vntopia font family,
++ 2008-2012, Andrey V. Panov
++License: SIL-OPEN-FONT
++
++Files: src/librustdoc/html/static/SourceCodePro*
++Copyright: 2010, 2012 Adobe Systems Incorporated
++License: SIL-OPEN-FONT
++
++Files: src/librustdoc/html/static/SourceSerifPro*
++Copyright: 2014 Adobe Systems Incorporated
++License: SIL-OPEN-FONT
++
++Files: src/librustdoc/html/static/main.js
++Copyright: 2014 The Rust Project Developers
++License: Expat or Apache-2.0
++
++Files: src/libstd/memchr.rs
++Copyright: 2015 Andrew Gallant, bluss and Nicolas Koch
++License: Expat or Apache-2.0
++
++Files: src/libstd/sync/mpsc/mpsc_queue.rs
++ src/libstd/sync/mpsc/spsc_queue.rs
++Copyright: 2010-2011 Dmitry Vyukov
++License: BSD-2-Clause
++
++Files: debian/icons/rust-logo-32x32-blk.png
++Copyright: Mozilla Foundation
++License: CC-BY
++Comment:
++ Relevant discussion in https://github.com/rust-lang/rust/issues/11562
++
++License: Apache-2.0
++ On Debian systems, the full text of the Apache License
++ Version 2.0 can be found in the file
++ `/usr/share/common-licenses/Apache-2.0'.
++
++License: BSD-2-clause
++ Redistribution and use in source and binary forms, with
++ or without modification, are permitted provided that the
++ following conditions are met:
++ .
++ 1. Redistributions of source code must retain the above
++ copyright notice, this list of conditions and the
++ following disclaimer.
++ 2. Redistributions in binary form must reproduce the
++ above copyright notice, this list of conditions and
++ the following disclaimer in the documentation and/or
++ other materials provided with the distribution.
++ .
++ THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS
++ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
++ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
++ DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
++ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
++ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
++ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
++ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
++ IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++
++License: Expat
++ Permission is hereby granted, free of charge, to any
++ person obtaining a copy of this software and associated
++ documentation files (the "Software"), to deal in the
++ Software without restriction, including without
++ limitation the rights to use, copy, modify, merge,
++ publish, distribute, sublicense, and/or sell copies of
++ the Software, and to permit persons to whom the Software
++ is furnished to do so, subject to the following
++ conditions:
++ .
++ The above copyright notice and this permission notice
++ shall be included in all copies or substantial portions
++ of the Software.
++ .
++ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
++ ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
++ TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
++ PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
++ SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
++ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
++ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
++ IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
++ DEALINGS IN THE SOFTWARE.
++
++License: BSD-3-clause
++ Redistribution and use in source and binary forms, with or without
++ modification, are permitted provided that the following conditions
++ are met:
++ 1. Redistributions of source code must retain the above copyright
++ notice, this list of conditions and the following disclaimer.
++ 2. Redistributions in binary form must reproduce the above copyright
++ notice, this list of conditions and the following disclaimer in the
++ documentation and/or other materials provided with the distribution.
++ 3. Neither the name of the organization nor the names of its contributors
++ may be used to endorse or promote products derived from this software
++ without specific prior written permission.
++ .
++ THIS SOFTWARE IS PROVIDED BY COPYRIGHT HOLDER AND CONTRIBUTORS ``AS IS'' AND
++ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
++ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
++ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
++ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
++ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
++ SUCH DAMAGE.
++
++License: ISC
++ Permission to use, copy, modify, and distribute this software for any
++ purpose with or without fee is hereby granted, provided that the above
++ copyright notice and this permission notice appear in all copies.
++ .
++ THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++
++License: SIL-OPEN-FONT
++ This Font Software is licensed under the SIL Open Font License,
++ Version 1.1.
++ .
++ This license is copied below, and is also available with a FAQ at:
++ http://scripts.sil.org/OFL
++ .
++ SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
++ .
++ PREAMBLE The goals of the Open Font License (OFL) are to stimulate
++ worldwide development of collaborative font projects, to support the font
++ creation efforts of academic and linguistic communities, and to provide
++ a free and open framework in which fonts may be shared and improved in
++ partnership with others.
++ .
++ The OFL allows the licensed fonts to be used, studied, modified and
++ redistributed freely as long as they are not sold by themselves.
++ The fonts, including any derivative works, can be bundled, embedded,
++ redistributed and/or sold with any software provided that any reserved
++ names are not used by derivative works. The fonts and derivatives,
++ however, cannot be released under any other type of license. The
++ requirement for fonts to remain under this license does not apply to
++ any document created using the fonts or their derivatives.
++ .
++ DEFINITIONS
++ "Font Software" refers to the set of files released by the Copyright
++ Holder(s) under this license and clearly marked as such.
++ This may include source files, build scripts and documentation.
++ .
++ "Reserved Font Name" refers to any names specified as such after the
++ copyright statement(s).
++ .
++ "Original Version" refers to the collection of Font Software components
++ as distributed by the Copyright Holder(s).
++ .
++ "Modified Version" refers to any derivative made by adding to, deleting,
++ or substituting ? in part or in whole ?
++ any of the components of the Original Version, by changing formats or
++ by porting the Font Software to a new environment.
++ .
++ "Author" refers to any designer, engineer, programmer, technical writer
++ or other person who contributed to the Font Software.
++ .
++ PERMISSION & CONDITIONS
++ .
++ Permission is hereby granted, free of charge, to any person obtaining a
++ copy of the Font Software, to use, study, copy, merge, embed, modify,
++ redistribute, and sell modified and unmodified copies of the Font
++ Software, subject to the following conditions:
++ .
++ 1) Neither the Font Software nor any of its individual components,in
++ Original or Modified Versions, may be sold by itself.
++ .
++ 2) Original or Modified Versions of the Font Software may be bundled,
++ redistributed and/or sold with any software, provided that each copy
++ contains the above copyright notice and this license. These can be
++ included either as stand-alone text files, human-readable headers or
++ in the appropriate machine-readable metadata fields within text or
++ binary files as long as those fields can be easily viewed by the user.
++ .
++ 3) No Modified Version of the Font Software may use the Reserved Font
++ Name(s) unless explicit written permission is granted by the
++ corresponding Copyright Holder. This restriction only applies to the
++ primary font name as presented to the users.
++ .
++ 4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
++ Software shall not be used to promote, endorse or advertise any
++ Modified Version, except to acknowledge the contribution(s) of the
++ Copyright Holder(s) and the Author(s) or with their explicit written
++ permission.
++ 5) The Font Software, modified or unmodified, in part or in whole, must
++ be distributed entirely under this license, and must not be distributed
++ under any other license. The requirement for fonts to remain under
++ this license does not apply to any document created using the Font
++ Software.
++ .
++ TERMINATION
++ This license becomes null and void if any of the above conditions are not met.
++ .
++ DISCLAIMER
++ THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
++ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
++ OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
++ COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
++ DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ FROM, OUT OF THE USE OR INABILITY
++
++License: GPL-2+
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++ .
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++ .
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
++Comment:
++ On Debian systems, see /usr/share/common-licenses/GPL-2 for the full
++ text of the GPL version 2.
++
++License: GPL-3+ with GCC Runtime Library exception
++ GCC is free software; you can redistribute it and/or modify it under
++ the terms of the GNU General Public License as published by the Free
++ Software Foundation; either version 3, or (at your option) any later
++ version.
++ .
++ GCC is distributed in the hope that it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
++ License for more details.
++ .
++ Under Section 7 of GPL version 3, you are granted additional
++ permissions described in the GCC Runtime Library Exception, version
++ 3.1, as published by the Free Software Foundation.
++ .
++ You should have received a copy of the GNU General Public License and
++ a copy of the GCC Runtime Library Exception along with this program;
++ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
++ <http://www.gnu.org/licenses/>.
++
++License: CC-BY
++ Attribution 4.0 International
++ .
++ =======================================================================
++ .
++ Creative Commons Corporation ("Creative Commons") is not a law firm and
++ does not provide legal services or legal advice. Distribution of
++ Creative Commons public licenses does not create a lawyer-client or
++ other relationship. Creative Commons makes its licenses and related
++ information available on an "as-is" basis. Creative Commons gives no
++ warranties regarding its licenses, any material licensed under their
++ terms and conditions, or any related information. Creative Commons
++ disclaims all liability for damages resulting from their use to the
++ fullest extent possible.
++ .
++ Using Creative Commons Public Licenses
++ .
++ Creative Commons public licenses provide a standard set of terms and
++ conditions that creators and other rights holders may use to share
++ original works of authorship and other material subject to copyright
++ and certain other rights specified in the public license below. The
++ following considerations are for informational purposes only, are not
++ exhaustive, and do not form part of our licenses.
++ .
++ Considerations for licensors: Our public licenses are
++ intended for use by those authorized to give the public
++ permission to use material in ways otherwise restricted by
++ copyright and certain other rights. Our licenses are
++ irrevocable. Licensors should read and understand the terms
++ and conditions of the license they choose before applying it.
++ Licensors should also secure all rights necessary before
++ applying our licenses so that the public can reuse the
++ material as expected. Licensors should clearly mark any
++ material not subject to the license. This includes other CC-
++ licensed material, or material used under an exception or
++ limitation to copyright. More considerations for licensors:
++ wiki.creativecommons.org/Considerations_for_licensors
++ .
++ Considerations for the public: By using one of our public
++ licenses, a licensor grants the public permission to use the
++ licensed material under specified terms and conditions. If
++ the licensor's permission is not necessary for any reason--for
++ example, because of any applicable exception or limitation to
++ copyright--then that use is not regulated by the license. Our
++ licenses grant only permissions under copyright and certain
++ other rights that a licensor has authority to grant. Use of
++ the licensed material may still be restricted for other
++ reasons, including because others have copyright or other
++ rights in the material. A licensor may make special requests,
++ such as asking that all changes be marked or described.
++ Although not required by our licenses, you are encouraged to
++ respect those requests where reasonable. More_considerations
++ for the public:
++ wiki.creativecommons.org/Considerations_for_licensees
++ .
++ =======================================================================
++ .
++ Creative Commons Attribution 4.0 International Public License
++ .
++ By exercising the Licensed Rights (defined below), You accept and agree
++ to be bound by the terms and conditions of this Creative Commons
++ Attribution 4.0 International Public License ("Public License"). To the
++ extent this Public License may be interpreted as a contract, You are
++ granted the Licensed Rights in consideration of Your acceptance of
++ these terms and conditions, and the Licensor grants You such rights in
++ consideration of benefits the Licensor receives from making the
++ Licensed Material available under these terms and conditions.
++ .
++ .
++ Section 1 -- Definitions.
++ .
++ a. Adapted Material means material subject to Copyright and Similar
++ Rights that is derived from or based upon the Licensed Material
++ and in which the Licensed Material is translated, altered,
++ arranged, transformed, or otherwise modified in a manner requiring
++ permission under the Copyright and Similar Rights held by the
++ Licensor. For purposes of this Public License, where the Licensed
++ Material is a musical work, performance, or sound recording,
++ Adapted Material is always produced where the Licensed Material is
++ synched in timed relation with a moving image.
++ .
++ b. Adapter's License means the license You apply to Your Copyright
++ and Similar Rights in Your contributions to Adapted Material in
++ accordance with the terms and conditions of this Public License.
++ .
++ c. Copyright and Similar Rights means copyright and/or similar rights
++ closely related to copyright including, without limitation,
++ performance, broadcast, sound recording, and Sui Generis Database
++ Rights, without regard to how the rights are labeled or
++ categorized. For purposes of this Public License, the rights
++ specified in Section 2(b)(1)-(2) are not Copyright and Similar
++ Rights.
++ .
++ d. Effective Technological Measures means those measures that, in the
++ absence of proper authority, may not be circumvented under laws
++ fulfilling obligations under Article 11 of the WIPO Copyright
++ Treaty adopted on December 20, 1996, and/or similar international
++ agreements.
++ .
++ e. Exceptions and Limitations means fair use, fair dealing, and/or
++ any other exception or limitation to Copyright and Similar Rights
++ that applies to Your use of the Licensed Material.
++ .
++ f. Licensed Material means the artistic or literary work, database,
++ or other material to which the Licensor applied this Public
++ License.
++ .
++ g. Licensed Rights means the rights granted to You subject to the
++ terms and conditions of this Public License, which are limited to
++ all Copyright and Similar Rights that apply to Your use of the
++ Licensed Material and that the Licensor has authority to license.
++ .
++ h. Licensor means the individual(s) or entity(ies) granting rights
++ under this Public License.
++ .
++ i. Share means to provide material to the public by any means or
++ process that requires permission under the Licensed Rights, such
++ as reproduction, public display, public performance, distribution,
++ dissemination, communication, or importation, and to make material
++ available to the public including in ways that members of the
++ public may access the material from a place and at a time
++ individually chosen by them.
++ .
++ j. Sui Generis Database Rights means rights other than copyright
++ resulting from Directive 96/9/EC of the European Parliament and of
++ the Council of 11 March 1996 on the legal protection of databases,
++ as amended and/or succeeded, as well as other essentially
++ equivalent rights anywhere in the world.
++ .
++ k. You means the individual or entity exercising the Licensed Rights
++ under this Public License. Your has a corresponding meaning.
++ .
++ .
++ Section 2 -- Scope.
++ .
++ a. License grant.
++ .
++ 1. Subject to the terms and conditions of this Public License,
++ the Licensor hereby grants You a worldwide, royalty-free,
++ non-sublicensable, non-exclusive, irrevocable license to
++ exercise the Licensed Rights in the Licensed Material to:
++ .
++ a. reproduce and Share the Licensed Material, in whole or
++ in part; and
++ .
++ b. produce, reproduce, and Share Adapted Material.
++ .
++ 2. Exceptions and Limitations. For the avoidance of doubt, where
++ Exceptions and Limitations apply to Your use, this Public
++ License does not apply, and You do not need to comply with
++ its terms and conditions.
++ .
++ 3. Term. The term of this Public License is specified in Section
++ 6(a).
++ .
++ 4. Media and formats; technical modifications allowed. The
++ Licensor authorizes You to exercise the Licensed Rights in
++ all media and formats whether now known or hereafter created,
++ and to make technical modifications necessary to do so. The
++ Licensor waives and/or agrees not to assert any right or
++ authority to forbid You from making technical modifications
++ necessary to exercise the Licensed Rights, including
++ technical modifications necessary to circumvent Effective
++ Technological Measures. For purposes of this Public License,
++ simply making modifications authorized by this Section 2(a)
++ (4) never produces Adapted Material.
++ .
++ 5. Downstream recipients.
++ .
++ a. Offer from the Licensor -- Licensed Material. Every
++ recipient of the Licensed Material automatically
++ receives an offer from the Licensor to exercise the
++ Licensed Rights under the terms and conditions of this
++ Public License.
++ .
++ b. No downstream restrictions. You may not offer or impose
++ any additional or different terms or conditions on, or
++ apply any Effective Technological Measures to, the
++ Licensed Material if doing so restricts exercise of the
++ Licensed Rights by any recipient of the Licensed
++ Material.
++ .
++ 6. No endorsement. Nothing in this Public License constitutes or
++ may be construed as permission to assert or imply that You
++ are, or that Your use of the Licensed Material is, connected
++ with, or sponsored, endorsed, or granted official status by,
++ the Licensor or others designated to receive attribution as
++ provided in Section 3(a)(1)(A)(i).
++ .
++ b. Other rights.
++ .
++ 1. Moral rights, such as the right of integrity, are not
++ licensed under this Public License, nor are publicity,
++ privacy, and/or other similar personality rights; however, to
++ the extent possible, the Licensor waives and/or agrees not to
++ assert any such rights held by the Licensor to the limited
++ extent necessary to allow You to exercise the Licensed
++ Rights, but not otherwise.
++ .
++ 2. Patent and trademark rights are not licensed under this
++ Public License.
++ .
++ 3. To the extent possible, the Licensor waives any right to
++ collect royalties from You for the exercise of the Licensed
++ Rights, whether directly or through a collecting society
++ under any voluntary or waivable statutory or compulsory
++ licensing scheme. In all other cases the Licensor expressly
++ reserves any right to collect such royalties.
++ .
++ .
++ Section 3 -- License Conditions.
++ .
++ Your exercise of the Licensed Rights is expressly made subject to the
++ following conditions.
++ .
++ a. Attribution.
++ .
++ 1. If You Share the Licensed Material (including in modified
++ form), You must:
++ .
++ a. retain the following if it is supplied by the Licensor
++ with the Licensed Material:
++ .
++ i. identification of the creator(s) of the Licensed
++ Material and any others designated to receive
++ attribution, in any reasonable manner requested by
++ the Licensor (including by pseudonym if
++ designated);
++ .
++ ii. a copyright notice;
++ .
++ iii. a notice that refers to this Public License;
++ .
++ iv. a notice that refers to the disclaimer of
++ warranties;
++ .
++ v. a URI or hyperlink to the Licensed Material to the
++ extent reasonably practicable;
++ .
++ b. indicate if You modified the Licensed Material and
++ retain an indication of any previous modifications; and
++ .
++ c. indicate the Licensed Material is licensed under this
++ Public License, and include the text of, or the URI or
++ hyperlink to, this Public License.
++ .
++ 2. You may satisfy the conditions in Section 3(a)(1) in any
++ reasonable manner based on the medium, means, and context in
++ which You Share the Licensed Material. For example, it may be
++ reasonable to satisfy the conditions by providing a URI or
++ hyperlink to a resource that includes the required
++ information.
++ .
++ 3. If requested by the Licensor, You must remove any of the
++ information required by Section 3(a)(1)(A) to the extent
++ reasonably practicable.
++ .
++ 4. If You Share Adapted Material You produce, the Adapter's
++ License You apply must not prevent recipients of the Adapted
++ Material from complying with this Public License.
++ .
++ .
++ Section 4 -- Sui Generis Database Rights.
++ .
++ Where the Licensed Rights include Sui Generis Database Rights that
++ apply to Your use of the Licensed Material:
++ .
++ a. for the avoidance of doubt, Section 2(a)(1) grants You the right
++ to extract, reuse, reproduce, and Share all or a substantial
++ portion of the contents of the database;
++ .
++ b. if You include all or a substantial portion of the database
++ contents in a database in which You have Sui Generis Database
++ Rights, then the database in which You have Sui Generis Database
++ Rights (but not its individual contents) is Adapted Material; and
++ .
++ c. You must comply with the conditions in Section 3(a) if You Share
++ all or a substantial portion of the contents of the database.
++ .
++ For the avoidance of doubt, this Section 4 supplements and does not
++ replace Your obligations under this Public License where the Licensed
++ Rights include other Copyright and Similar Rights.
++ .
++ .
++ Section 5 -- Disclaimer of Warranties and Limitation of Liability.
++ .
++ a. UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE
++ EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS
++ AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF
++ ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS,
++ IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION,
++ WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR
++ PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS,
++ ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT
++ KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT
++ ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
++ .
++ b. TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE
++ TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION,
++ NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT,
++ INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES,
++ COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR
++ USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN
++ ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR
++ DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR
++ IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
++ .
++ c. The disclaimer of warranties and limitation of liability provided
++ above shall be interpreted in a manner that, to the extent
++ possible, most closely approximates an absolute disclaimer and
++ waiver of all liability.
++ .
++ .
++ Section 6 -- Term and Termination.
++ .
++ a. This Public License applies for the term of the Copyright and
++ Similar Rights licensed here. However, if You fail to comply with
++ this Public License, then Your rights under this Public License
++ terminate automatically.
++ .
++ b. Where Your right to use the Licensed Material has terminated under
++ Section 6(a), it reinstates:
++ .
++ 1. automatically as of the date the violation is cured, provided
++ it is cured within 30 days of Your discovery of the
++ violation; or
++ .
++ 2. upon express reinstatement by the Licensor.
++ .
++ For the avoidance of doubt, this Section 6(b) does not affect any
++ right the Licensor may have to seek remedies for Your violations
++ of this Public License.
++ .
++ c. For the avoidance of doubt, the Licensor may also offer the
++ Licensed Material under separate terms or conditions or stop
++ distributing the Licensed Material at any time; however, doing so
++ will not terminate this Public License.
++ .
++ d. Sections 1, 5, 6, 7, and 8 survive termination of this Public
++ License.
++ .
++ .
++ Section 7 -- Other Terms and Conditions.
++ .
++ a. The Licensor shall not be bound by any additional or different
++ terms or conditions communicated by You unless expressly agreed.
++ .
++ b. Any arrangements, understandings, or agreements regarding the
++ Licensed Material not stated herein are separate from and
++ independent of the terms and conditions of this Public License.
++ .
++ .
++ Section 8 -- Interpretation.
++ .
++ a. For the avoidance of doubt, this Public License does not, and
++ shall not be interpreted to, reduce, limit, restrict, or impose
++ conditions on any use of the Licensed Material that could lawfully
++ be made without permission under this Public License.
++ .
++ b. To the extent possible, if any provision of this Public License is
++ deemed unenforceable, it shall be automatically reformed to the
++ minimum extent necessary to make it enforceable. If the provision
++ cannot be reformed, it shall be severed from this Public License
++ without affecting the enforceability of the remaining terms and
++ conditions.
++ .
++ c. No term or condition of this Public License will be waived and no
++ failure to comply consented to unless expressly agreed to by the
++ Licensor.
++ .
++ d. Nothing in this Public License constitutes or may be interpreted
++ as a limitation upon, or waiver of, any privileges and immunities
++ that apply to the Licensor or You, including from the legal
++ processes of any jurisdiction or authority.
++ .
++ .
++ =======================================================================
++ .
++ Creative Commons is not a party to its public licenses.
++ Notwithstanding, Creative Commons may elect to apply one of its public
++ licenses to material it publishes and in those instances will be
++ considered the "Licensor." Except for the limited purpose of indicating
++ that material is shared under a Creative Commons public license or as
++ otherwise permitted by the Creative Commons policies published at
++ creativecommons.org/policies, Creative Commons does not authorize the
++ use of the trademark "Creative Commons" or any other trademark or logo
++ of Creative Commons without its prior written consent including,
++ without limitation, in connection with any unauthorized modifications
++ to any of its public licenses or any other arrangements,
++ understandings, or agreements concerning use of licensed material. For
++ the avoidance of doubt, this paragraph does not form part of the public
++ licenses.
++ .
++ Creative Commons may be contacted at creativecommons.org.
--- /dev/null
--- /dev/null
++README.md
--- /dev/null
--- /dev/null
++#!/bin/sh
++set -e
++
++case "$1" in
++"-N") fwd=-N; rev=-R; verb="applied";;
++"-R") fwd=-R; rev=-N; verb="reversed";;
++*) echo >&2 "Usage: $0 <-N|-R> <patch-file>"; exit 2;;
++esac
++
++if patch --dry-run -f $rev -p1 < "$2" >/dev/null; then
++ echo >&2 "patch already $verb: $2"
++ exit 0
++fi
++patch --dry-run -f $fwd -p1 < "$2"
++patch -f $fwd -p1 < "$2"
--- /dev/null
--- /dev/null
++[DEFAULT]
++pristine-tar = True
--- /dev/null
--- /dev/null
++# "libstd" just seemed too generic
++libstd-rust-1.16 binary: package-name-doesnt-match-sonames
++
++# Rust doesn't use dev shlib symlinks nor any of the other shlib support stuff
++libstd-rust-1.16 binary: dev-pkg-without-shlib-symlink
++libstd-rust-1.16 binary: shlib-without-versioned-soname
++libstd-rust-1.16 binary: pkg-has-shlibs-control-file-but-no-actual-shared-libs
++libstd-rust-1.16 binary: package-must-activate-ldconfig-trigger
++
++# Libraries that use libc symbols (libterm, libstd, etc) *are* linked
++# to libc. Lintian gets upset that some Rust libraries don't need
++# libc, boo hoo.
++libstd-rust-1.16 binary: library-not-linked-against-libc
++
++# We need it for now
++binary-or-shlib-defines-rpath usr/lib/*/lib*so /usr/lib/rustlib/*lib
--- /dev/null
--- /dev/null
++usr/lib/rustlib/*/lib/
--- /dev/null
--- /dev/null
++# I assure you, dear lintian, that "/usr/lib/rustlib/x86_64-unknown-linux-gnu/"
++# is indeed an arch-specific directory.
++libstd-rust-dev binary: arch-dependent-file-not-in-arch-specific-directory
--- /dev/null
--- /dev/null
++#!/bin/sh
++# See README.Debian "Bootstrapping a new distro" for details.
++#
++# You may want to use `debian/rules source_orig-dl` instead of calling this
++# directly.
++
++set -e
++
++upstream_version="$(dpkg-parsechangelog -SVersion | sed -e 's/\(.*\)-.*/\1/g')"
++upstream_bootstrap_arch="${upstream_bootstrap_arch:-amd64 arm64 armel armhf i386 powerpc ppc64el s390x}"
++
++rm -f dl/*.sha256
++for deb_host_arch in $upstream_bootstrap_arch; do
++ make -s --no-print-directory -f debian/architecture-test.mk "rust-for-deb_${deb_host_arch}" | {
++ read deb_host_arch rust_triplet
++ python src/etc/get-stage0.py "${rust_triplet}"
++ rm -rf "${rust_triplet}"
++ }
++done
++
++tar --mtime=@"$(date +%s)" --clamp-mtime \
++ --owner=root --group=root \
++ -cJf "../rustc_${upstream_version}.orig-dl.tar.xz" \
++ --transform "s/^dl\///" \
++ dl/*
++
++rm -f src/bootstrap/bootstrap.pyc
++
++cat <<eof
++================================================================================
++orig-dl bootstrapping tarball created in ../rustc_${upstream_version}.orig-dl.tar.xz
++containing the upstream compilers for $upstream_bootstrap_arch
++
++You *probably* now want to do the following steps:
++
++1. Add [$(echo $upstream_bootstrap_arch | sed -e 's/\S*/!\0/g')] to the rustc Build-Depend in d/control
++2. Update d/changelog
++3. Run \`dpkg-source -b .\` to generate a .dsc that includes this tarball.
++================================================================================
++eof
--- /dev/null
--- /dev/null
++Description: Set DT_SONAME when building dylibs
++ In Rust, library filenames include a version-specific hash to help
++ the run-time linker find the correct version. Unlike in C/C++, the
++ compiler looks for all libraries matching a glob that ignores the
++ hash and reads embedded metadata to work out versions, etc.
++ .
++ The upshot is that there is no need for the usual "libfoo.so ->
++ libfoo-1.2.3.so" symlink common with C/C++ when building with Rust,
++ and no need to communicate an alternate filename to use at run-time
++ vs compile time. If linking to a Rust dylib from C/C++ however, a
++ "libfoo.so -> libfoo-$hash.so" symlink may well be useful and in
++ this case DT_SONAME=libfoo-$hash.so would be required. More
++ mundanely, various tools (eg: dpkg-shlibdeps) complain if they don't
++ find DT_SONAME on shared libraries in public directories.
++ .
++ This patch passes -Wl,-soname=$outfile when building dylibs (and
++ using a GNU linker).
++Author: Angus Lees <gus@debian.org>
++Forwarded: no
++
++Index: rust/src/librustc_trans/back/link.rs
++===================================================================
++--- rust.orig/src/librustc_trans/back/link.rs
+++++ rust/src/librustc_trans/back/link.rs
++@@ -927,6 +927,13 @@ fn link_args(cmd: &mut Linker,
++ cmd.args(&rpath::get_rpath_flags(&mut rpath_config));
++ }
++
+++ if (crate_type == config::CrateTypeDylib || crate_type == config::CrateTypeCdylib)
+++ && t.options.linker_is_gnu {
+++ let filename = String::from(out_filename.file_name().unwrap().to_str().unwrap());
+++ let soname = [String::from("-Wl,-soname=") + &filename];
+++ cmd.args(&soname);
+++ }
+++
++ // Finally add all the linker arguments provided on the command line along
++ // with any #[link_args] attributes found inside the crate
++ if let Some(ref args) = sess.opts.cg.link_args {
--- /dev/null
--- /dev/null
++Index: rustc.git/Makefile
++===================================================================
++--- rustc.git.orig/Makefile
+++++ rustc.git/Makefile
++@@ -21,7 +21,7 @@ BOOTSTRAP := $(CFG_PYTHON) $(CFG_SRC_DIR
++
++ all:
++ $(Q)$(BOOTSTRAP) build $(BOOTSTRAP_ARGS)
++- $(Q)$(BOOTSTRAP) doc $(BOOTSTRAP_ARGS)
+++# $(Q)$(BOOTSTRAP) doc $(BOOTSTRAP_ARGS)
++
++ help:
++ $(Q)echo 'Welcome to the rustbuild build system!'
--- /dev/null
--- /dev/null
++Description: Don't download SHA256 if it's already available locally
++ In Debian we provide the stage0 tarballs as a separate component so that the
++ buildds don't need to access the network during the build.
++Author: Ximin Luo <infinity0@debian.org>
++Forwarded: not-needed
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/src/bootstrap/bootstrap.py
+++++ b/src/bootstrap/bootstrap.py
++@@ -22,15 +22,17 @@
++ from time import time
++
++
++-def get(url, path, verbose=False):
+++def get(url, path, verbose=False, use_local_hash_if_present=False):
++ sha_url = url + ".sha256"
++ with tempfile.NamedTemporaryFile(delete=False) as temp_file:
++ temp_path = temp_file.name
++- with tempfile.NamedTemporaryFile(suffix=".sha256", delete=False) as sha_file:
++- sha_path = sha_file.name
+++ sha_path = path + ".sha256"
++
++ try:
++- download(sha_path, sha_url, False, verbose)
+++ if use_local_hash_if_present and os.path.exists(sha_path):
+++ print("using already-download file " + sha_path)
+++ else:
+++ download(sha_path, sha_url, False, verbose)
++ if os.path.exists(path):
++ if verify(path, sha_path, False):
++ if verbose:
++@@ -47,7 +49,6 @@
++ print("moving {} to {}".format(temp_path, path))
++ shutil.move(temp_path, path)
++ finally:
++- delete_if_present(sha_path, verbose)
++ delete_if_present(temp_path, verbose)
++
++
++--- a/src/etc/get-stage0.py
+++++ b/src/etc/get-stage0.py
++@@ -31,7 +31,7 @@
++ filename = 'rustc-{}-{}.tar.gz'.format(channel, triple)
++ url = 'https://static.rust-lang.org/dist/{}/{}'.format(date, filename)
++ dst = dl_dir + '/' + filename
++- bootstrap.get(url, dst)
+++ bootstrap.get(url, dst, use_local_hash_if_present=True)
++
++ stage0_dst = triple + '/stage0'
++ if os.path.exists(stage0_dst):
--- /dev/null
--- /dev/null
++Description: Dynamically link with Debian's LLVM
++ Hard-code -lLLVM, instead of using llvm-config to figure out which components
++ to link in. The latter doesn't work properly anyway for dynamic linking - see
++ LLVM bug #3201. If/when this is fixed, then Rust upstream will probably fix
++ their code to allow for this, and after that happens we can rm this patch.
++ .
++ TODO: not sure if we need extra tweaks for cross-compiling
++Author: Ximin Luo <infinity0@debian.org>
++Forwarded: not-needed
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++Index: rust/src/librustc_llvm/build.rs
++===================================================================
++--- rust.orig/src/librustc_llvm/build.rs
+++++ rust/src/librustc_llvm/build.rs
++@@ -158,55 +158,10 @@ fn main() {
++
++ let (llvm_kind, llvm_link_arg) = detect_llvm_link(&llvm_config);
++
++- // Link in all LLVM libraries, if we're uwring the "wrong" llvm-config then
++- // we don't pick up system libs because unfortunately they're for the host
++- // of llvm-config, not the target that we're attempting to link.
++- let mut cmd = Command::new(&llvm_config);
++- cmd.arg("--libs");
++-
++- if let Some(link_arg) = llvm_link_arg {
++- cmd.arg(link_arg);
++- }
++-
++- if !is_crossed {
++- cmd.arg("--system-libs");
++- }
++- cmd.args(&components[..]);
++-
++- for lib in output(&mut cmd).split_whitespace() {
++- let name = if lib.starts_with("-l") {
++- &lib[2..]
++- } else if lib.starts_with("-") {
++- &lib[1..]
++- } else if Path::new(lib).exists() {
++- // On MSVC llvm-config will print the full name to libraries, but
++- // we're only interested in the name part
++- let name = Path::new(lib).file_name().unwrap().to_str().unwrap();
++- name.trim_right_matches(".lib")
++- } else if lib.ends_with(".lib") {
++- // Some MSVC libraries just come up with `.lib` tacked on, so chop
++- // that off
++- lib.trim_right_matches(".lib")
++- } else {
++- continue;
++- };
++-
++- // Don't need or want this library, but LLVM's CMake build system
++- // doesn't provide a way to disable it, so filter it here even though we
++- // may or may not have built it. We don't reference anything from this
++- // library and it otherwise may just pull in extra dependencies on
++- // libedit which we don't want
++- if name == "LLVMLineEditor" {
++- continue;
++- }
++-
++- let kind = if name.starts_with("LLVM") {
++- llvm_kind
++- } else {
++- "dylib"
++- };
++- println!("cargo:rustc-link-lib={}={}", kind, name);
++- }
+++ // Link in all LLVM libraries
+++ // Link in Debian full LLVM shared library.
+++ // FIXME: not sure what to do in the cross-compiling case.
+++ println!("cargo:rustc-link-lib={}={}", "dylib", "LLVM-3.9");
++
++ // LLVM ldflags
++ //
++Index: rust/src/etc/mklldeps.py
++===================================================================
++--- rust.orig/src/etc/mklldeps.py
+++++ rust/src/etc/mklldeps.py
++@@ -56,38 +56,13 @@ def runErr(args):
++
++ f.write("\n")
++
++-args = [llvm_config, '--shared-mode']
++-args.extend(components)
++-llvm_shared, out = runErr(args)
++-if llvm_shared:
++- llvm_shared = 'shared' in out
+++llvm_shared = True
++
++ # LLVM libs
++-args = [llvm_config, '--libs', '--system-libs']
++-args.extend(components)
++-out = run(args)
++-for lib in out.strip().replace("\n", ' ').split(' '):
++- if len(lib) == 0:
++- continue
++- # in some cases we get extra spaces in between libs so ignore those
++- if len(lib) == 1 and lib == ' ':
++- continue
++- # not all libs strictly follow -lfoo, on Bitrig, there is -pthread
++- if lib[0:2] == '-l':
++- lib = lib.strip()[2:]
++- elif lib[0] == '-':
++- lib = lib.strip()[1:]
++- # If this actually points at a literal file then we're on MSVC which now
++- # prints full paths, so get just the name of the library and strip off the
++- # trailing ".lib"
++- elif os.path.exists(lib):
++- lib = os.path.basename(lib)[:-4]
++- elif lib[-4:] == '.lib':
++- lib = lib[:-4]
++- f.write("#[link(name = \"" + lib + "\"")
++- if not llvm_shared and 'LLVM' in lib:
++- f.write(", kind = \"static\"")
++- f.write(")]\n")
+++# Link in Debian full LLVM shared library.
+++# FIXME: not sure what to do in the cross-compiling case.
+++f.write("#[link(name = \"LLVM-3.9\")]\n")
+++
++
++ # LLVM ldflags
++ out = run([llvm_config, '--ldflags'])
--- /dev/null
--- /dev/null
++Description: Dynamically link with Debian's LLVM
++ Hard-code -lLLVM, instead of using llvm-config to figure out which components
++ to link in. The latter doesn't work properly anyway for dynamic linking - see
++ LLVM bug #3201. If/when this is fixed, then Rust upstream will probably fix
++ their code to allow for this, and after that happens we can rm this patch.
++ .
++ TODO: not sure if we need extra tweaks for cross-compiling
++Author: Ximin Luo <infinity0@debian.org>
++Forwarded: not-needed
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/src/librustc_llvm/build.rs
+++++ b/src/librustc_llvm/build.rs
++@@ -157,55 +157,10 @@
++
++ let (llvm_kind, llvm_link_arg) = detect_llvm_link(&llvm_config);
++
++- // Link in all LLVM libraries, if we're uwring the "wrong" llvm-config then
++- // we don't pick up system libs because unfortunately they're for the host
++- // of llvm-config, not the target that we're attempting to link.
++- let mut cmd = Command::new(&llvm_config);
++- cmd.arg("--libs");
++-
++- if let Some(link_arg) = llvm_link_arg {
++- cmd.arg(link_arg);
++- }
++-
++- if !is_crossed {
++- cmd.arg("--system-libs");
++- }
++- cmd.args(&components[..]);
++-
++- for lib in output(&mut cmd).split_whitespace() {
++- let name = if lib.starts_with("-l") {
++- &lib[2..]
++- } else if lib.starts_with("-") {
++- &lib[1..]
++- } else if Path::new(lib).exists() {
++- // On MSVC llvm-config will print the full name to libraries, but
++- // we're only interested in the name part
++- let name = Path::new(lib).file_name().unwrap().to_str().unwrap();
++- name.trim_right_matches(".lib")
++- } else if lib.ends_with(".lib") {
++- // Some MSVC libraries just come up with `.lib` tacked on, so chop
++- // that off
++- lib.trim_right_matches(".lib")
++- } else {
++- continue;
++- };
++-
++- // Don't need or want this library, but LLVM's CMake build system
++- // doesn't provide a way to disable it, so filter it here even though we
++- // may or may not have built it. We don't reference anything from this
++- // library and it otherwise may just pull in extra dependencies on
++- // libedit which we don't want
++- if name == "LLVMLineEditor" {
++- continue;
++- }
++-
++- let kind = if name.starts_with("LLVM") {
++- llvm_kind
++- } else {
++- "dylib"
++- };
++- println!("cargo:rustc-link-lib={}={}", kind, name);
++- }
+++ // Link in all LLVM libraries
+++ // Link in Debian full LLVM shared library.
+++ // TODO: not sure what to do in the cross-compiling case.
+++ println!("cargo:rustc-link-lib={}={}", "dylib", "LLVM-3.9");
++
++ // LLVM ldflags
++ //
++--- a/src/etc/mklldeps.py
+++++ b/src/etc/mklldeps.py
++@@ -56,38 +56,13 @@
++
++ f.write("\n")
++
++-args = [llvm_config, '--shared-mode']
++-args.extend(components)
++-llvm_shared, out = runErr(args)
++-if llvm_shared:
++- llvm_shared = 'shared' in out
+++llvm_shared = True
++
++ # LLVM libs
++-args = [llvm_config, '--libs', '--system-libs']
++-args.extend(components)
++-out = run(args)
++-for lib in out.strip().replace("\n", ' ').split(' '):
++- if len(lib) == 0:
++- continue
++- # in some cases we get extra spaces in between libs so ignore those
++- if len(lib) == 1 and lib == ' ':
++- continue
++- # not all libs strictly follow -lfoo, on Bitrig, there is -pthread
++- if lib[0:2] == '-l':
++- lib = lib.strip()[2:]
++- elif lib[0] == '-':
++- lib = lib.strip()[1:]
++- # If this actually points at a literal file then we're on MSVC which now
++- # prints full paths, so get just the name of the library and strip off the
++- # trailing ".lib"
++- elif os.path.exists(lib):
++- lib = os.path.basename(lib)[:-4]
++- elif lib[-4:] == '.lib':
++- lib = lib[:-4]
++- f.write("#[link(name = \"" + lib + "\"")
++- if not llvm_shared and 'LLVM' in lib:
++- f.write(", kind = \"static\"")
++- f.write(")]\n")
+++# Link in Debian full LLVM shared library.
+++# TODO: not sure what to do in the cross-compiling case.
+++f.write("#[link(name = \"LLVM-3.9\")]\n")
+++
++
++ # LLVM ldflags
++ out = run([llvm_config, '--ldflags'])
--- /dev/null
--- /dev/null
++Description: Fill in mips Makefile rules
++ Upstream is about to delete the Makefiles in the next version, so this will
++ remain a Debian-specific patch.
++Author: Ximin Luo <infinity0@debian.org>
++Bug: https://github.com/rust-lang/rust/pull/38650
++Forwarded: not-needed
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/mk/cfg/mips-unknown-linux-gnu.mk
+++++ b/mk/cfg/mips-unknown-linux-gnu.mk
++@@ -18,7 +18,7 @@
++ CFG_WINDOWSY_mips-unknown-linux-gnu :=
++ CFG_UNIXY_mips-unknown-linux-gnu := 1
++ CFG_LDPATH_mips-unknown-linux-gnu :=
++-CFG_RUN_mips-unknown-linux-gnu=
++-CFG_RUN_TARG_mips-unknown-linux-gnu=
+++CFG_RUN_mips-unknown-linux-gnu=$(2)
+++CFG_RUN_TARG_mips-unknown-linux-gnu=$(call CFG_RUN_mips-unknown-linux-gnu,,$(2))
++ RUSTC_FLAGS_mips-unknown-linux-gnu :=
++ CFG_GNU_TRIPLE_mips-unknown-linux-gnu := mips-unknown-linux-gnu
++--- a/mk/cfg/mips64-unknown-linux-gnuabi64.mk
+++++ b/mk/cfg/mips64-unknown-linux-gnuabi64.mk
++@@ -1 +1,24 @@
++-# rustbuild-only target
+++# mips64-unknown-linux-gnuabi64 configuration
+++CC_mips64-unknown-linux-gnuabi64=mips64-linux-gnuabi64-gcc
+++CXX_mips64-unknown-linux-gnuabi64=mips64-linux-gnuabi64-g++
+++CPP_mips64-unknown-linux-gnuabi64=mips64-linux-gnuabi64-gcc
+++AR_mips64-unknown-linux-gnuabi64=mips64-linux-gnuabi64-ar
+++CFG_LIB_NAME_mips64-unknown-linux-gnuabi64=lib$(1).so
+++CFG_STATIC_LIB_NAME_mips64-unknown-linux-gnuabi64=lib$(1).a
+++CFG_LIB_GLOB_mips64-unknown-linux-gnuabi64=lib$(1)-*.so
+++CFG_LIB_DSYM_GLOB_mips64-unknown-linux-gnuabi64=lib$(1)-*.dylib.dSYM
+++CFG_JEMALLOC_CFLAGS_mips64-unknown-linux-gnuabi64 := -mips64r2 -mabi=64 $(CFLAGS)
+++CFG_GCCISH_CFLAGS_mips64-unknown-linux-gnuabi64 := -Wall -g -fPIC -mips64r2 -mabi=64 $(CFLAGS)
+++CFG_GCCISH_CXXFLAGS_mips64-unknown-linux-gnuabi64 := -fno-rtti $(CXXFLAGS)
+++CFG_GCCISH_LINK_FLAGS_mips64-unknown-linux-gnuabi64 := -shared -fPIC -g -mips64r2
+++CFG_GCCISH_DEF_FLAG_mips64-unknown-linux-gnuabi64 := -Wl,--export-dynamic,--dynamic-list=
+++CFG_LLC_FLAGS_mips64-unknown-linux-gnuabi64 :=
+++CFG_INSTALL_NAME_mips64-unknown-linux-gnuabi64 =
+++CFG_EXE_SUFFIX_mips64-unknown-linux-gnuabi64 :=
+++CFG_WINDOWSY_mips64-unknown-linux-gnuabi64 :=
+++CFG_UNIXY_mips64-unknown-linux-gnuabi64 := 1
+++CFG_LDPATH_mips64-unknown-linux-gnuabi64 :=
+++CFG_RUN_mips64-unknown-linux-gnuabi64=$(2)
+++CFG_RUN_TARG_mips64-unknown-linux-gnuabi64=$(call CFG_RUN_mips64-unknown-linux-gnuabi64,,$(2))
+++RUSTC_FLAGS_mips64-unknown-linux-gnuabi64 :=
+++CFG_GNU_TRIPLE_mips64-unknown-linux-gnuabi64 := mips64-unknown-linux-gnuabi64
++--- a/mk/cfg/mips64el-unknown-linux-gnuabi64.mk
+++++ b/mk/cfg/mips64el-unknown-linux-gnuabi64.mk
++@@ -1 +1,24 @@
++-# rustbuild-only target
+++# mips64el-unknown-linux-gnuabi64 configuration
+++CC_mips64el-unknown-linux-gnuabi64=mips64el-linux-gnuabi64-gcc
+++CXX_mips64el-unknown-linux-gnuabi64=mips64el-linux-gnuabi64-g++
+++CPP_mips64el-unknown-linux-gnuabi64=mips64el-linux-gnuabi64-gcc
+++AR_mips64el-unknown-linux-gnuabi64=mips64el-linux-gnuabi64-ar
+++CFG_LIB_NAME_mips64el-unknown-linux-gnuabi64=lib$(1).so
+++CFG_STATIC_LIB_NAME_mips64el-unknown-linux-gnuabi64=lib$(1).a
+++CFG_LIB_GLOB_mips64el-unknown-linux-gnuabi64=lib$(1)-*.so
+++CFG_LIB_DSYM_GLOB_mips64el-unknown-linux-gnuabi64=lib$(1)-*.dylib.dSYM
+++CFG_JEMALLOC_CFLAGS_mips64el-unknown-linux-gnuabi64 := -mips64r2 -mabi=64 $(CFLAGS)
+++CFG_GCCISH_CFLAGS_mips64el-unknown-linux-gnuabi64 := -Wall -g -fPIC -mips64r2 -mabi=64 $(CFLAGS)
+++CFG_GCCISH_CXXFLAGS_mips64el-unknown-linux-gnuabi64 := -fno-rtti $(CXXFLAGS)
+++CFG_GCCISH_LINK_FLAGS_mips64el-unknown-linux-gnuabi64 := -shared -fPIC -g -mips64r2
+++CFG_GCCISH_DEF_FLAG_mips64el-unknown-linux-gnuabi64 := -Wl,--export-dynamic,--dynamic-list=
+++CFG_LLC_FLAGS_mips64el-unknown-linux-gnuabi64 :=
+++CFG_INSTALL_NAME_mips64el-unknown-linux-gnuabi64 =
+++CFG_EXE_SUFFIX_mips64el-unknown-linux-gnuabi64 :=
+++CFG_WINDOWSY_mips64el-unknown-linux-gnuabi64 :=
+++CFG_UNIXY_mips64el-unknown-linux-gnuabi64 := 1
+++CFG_LDPATH_mips64el-unknown-linux-gnuabi64 :=
+++CFG_RUN_mips64el-unknown-linux-gnuabi64=$(2)
+++CFG_RUN_TARG_mips64el-unknown-linux-gnuabi64=$(call CFG_RUN_mips64el-unknown-linux-gnuabi64,,$(2))
+++RUSTC_FLAGS_mips64el-unknown-linux-gnuabi64 :=
+++CFG_GNU_TRIPLE_mips64el-unknown-linux-gnuabi64 := mips64el-unknown-linux-gnuabi64
++--- a/mk/cfg/mipsel-unknown-linux-gnu.mk
+++++ b/mk/cfg/mipsel-unknown-linux-gnu.mk
++@@ -1,7 +1,7 @@
++ # mipsel-unknown-linux-gnu configuration
++ CC_mipsel-unknown-linux-gnu=mipsel-linux-gnu-gcc
++ CXX_mipsel-unknown-linux-gnu=mipsel-linux-gnu-g++
++-CPP_mipsel-unknown-linux-gnu=mipsel-linux-gnu-gcc
+++CPP_mipsel-unknown-linux-gnu=mipsel-linux-gnu-gcc -E
++ AR_mipsel-unknown-linux-gnu=mipsel-linux-gnu-ar
++ CFG_LIB_NAME_mipsel-unknown-linux-gnu=lib$(1).so
++ CFG_STATIC_LIB_NAME_mipsel-unknown-linux-gnu=lib$(1).a
++@@ -18,7 +18,7 @@
++ CFG_WINDOWSY_mipsel-unknown-linux-gnu :=
++ CFG_UNIXY_mipsel-unknown-linux-gnu := 1
++ CFG_LDPATH_mipsel-unknown-linux-gnu :=
++-CFG_RUN_mipsel-unknown-linux-gnu=
++-CFG_RUN_TARG_mipsel-unknown-linux-gnu=
+++CFG_RUN_mipsel-unknown-linux-gnu=$(2)
+++CFG_RUN_TARG_mipsel-unknown-linux-gnu=$(call CFG_RUN_mipsel-unknown-linux-gnu,,$(2))
++ RUSTC_FLAGS_mipsel-unknown-linux-gnu :=
++ CFG_GNU_TRIPLE_mipsel-unknown-linux-gnu := mipsel-unknown-linux-gnu
--- /dev/null
--- /dev/null
++Description: Fix configure architecture targets for Debian
++ Rust upstream sometimes builds for multiple triplets depending on the CPU,
++ since it could be valid for multiple triplets. We don't need to do this for
++ Debian; each DEB_HOST_ARCH maps to a single triplet. This patch indirectly
++ achieves this by setting CFG_{OS,CPU}TYPE to more specific values depending
++ on what DEB_HOST_ARCH is, hopefully preventing a multiple build.
++ .
++ Tested on armhf, untested on armel due to missing build-deps.
++Author: Ximin Luo <infinity0@debian.org>
++Forwarded: not-needed
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/configure
+++++ b/configure
++@@ -514,8 +514,19 @@
++ ;;
++
++ armv7l | armv8l)
++- CFG_CPUTYPE=armv7
++- CFG_OSTYPE="${CFG_OSTYPE}eabihf"
+++ case $DEB_HOST_ARCH in
+++ armhf)
+++ CFG_CPUTYPE=armv7
+++ CFG_OSTYPE="${CFG_OSTYPE}eabihf"
+++ ;;
+++ armel)
+++ CFG_CPUTYPE=arm
+++ CFG_OSTYPE="${CFG_OSTYPE}eabi"
+++ ;;
+++ *)
+++ err "unknown DEB_HOST_ARCH $DEB_HOST_ARCH for armv7l/armv8l cpu"
+++ ;;
+++ esac
++ ;;
++
++ aarch64)
--- /dev/null
--- /dev/null
++Description: Fix configure architecture targets for Debian
++ Rust upstream sometimes builds for multiple triplets depending on the CPU,
++ since it could be valid for multiple triplets. We don't need to do this for
++ Debian; each DEB_HOST_ARCH maps to a single triplet. This patch indirectly
++ achieves this by setting CFG_{OS,CPU}TYPE to more specific values depending
++ on what DEB_HOST_ARCH is, hopefully preventing a multiple build.
++ .
++ Tested on armhf, untested on armel due to missing build-deps.
++Author: Ximin Luo <infinity0@debian.org>
++Forwarded: not-needed
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++Index: rustc.git/configure
++===================================================================
++--- rustc.git.orig/configure
+++++ rustc.git/configure
++@@ -508,8 +508,19 @@ case $CFG_CPUTYPE in
++ ;;
++
++ armv7l)
++- CFG_CPUTYPE=armv7
++- CFG_OSTYPE="${CFG_OSTYPE}eabihf"
+++ case $DEB_HOST_ARCH in
+++ armhf)
+++ CFG_CPUTYPE=armv7
+++ CFG_OSTYPE="${CFG_OSTYPE}eabihf"
+++ ;;
+++ armel)
+++ CFG_CPUTYPE=arm
+++ CFG_OSTYPE="${CFG_OSTYPE}eabi"
+++ ;;
+++ *)
+++ err "unknown DEB_HOST_ARCH $DEB_HOST_ARCH for armv7l cpu"
+++ ;;
+++ esac
++ ;;
++
++ aarch64)
--- /dev/null
--- /dev/null
++Description: TODO
++ See https://lists.alioth.debian.org/pipermail/pkg-rust-maintainers/2017-February/000828.html
++ for possible followups
++Author: Erwan Prioul <erwan@linux.vnet.ibm.com>
++Forwarded: TODO
++
++diff -Naur a/src/test/run-make/issue-24445/Makefile b/src/test/run-make/issue-24445/Makefile
++--- a/src/test/run-make/issue-24445/Makefile 2017-02-17 10:21:17.092001151 +0000
+++++ b/src/test/run-make/issue-24445/Makefile 2017-02-21 13:07:36.719995153 +0000
++@@ -3,9 +3,9 @@
++ ifeq ($(UNAME),Linux)
++ all:
++ $(RUSTC) foo.rs
++- $(CC) foo.c -lfoo -L $(TMPDIR) -Wl,--gc-sections -lpthread -o $(TMPDIR)/foo
+++ $(CC) foo.c -lfoo -L $(TMPDIR) -Wl,--gc-sections -lpthread -ldl -o $(TMPDIR)/foo
++ $(call RUN,foo)
++- $(CC) foo.c -lfoo -L $(TMPDIR) -Wl,--gc-sections -lpthread -pie -fPIC -o $(TMPDIR)/foo
+++ $(CC) foo.c -lfoo -L $(TMPDIR) -Wl,--gc-sections -lpthread -ldl -pie -fPIC -o $(TMPDIR)/foo
++ $(call RUN,foo)
++ else
++ all:
--- /dev/null
--- /dev/null
++Description: Hardcode GDB python module directory
++ Debian package installs python modules into a fixed directory, so
++ just hardcode path in wrapper script.
++Author: Angus Lees <gus@debian.org>
++Forwarded: not-needed
++
++--- a/src/etc/rust-gdb
+++++ b/src/etc/rust-gdb
++@@ -13,11 +13,13 @@
++ set -e
++
++ # Find out where the pretty printer Python module is
++-RUSTC_SYSROOT=`rustc --print=sysroot`
++-GDB_PYTHON_MODULE_DIRECTORY="$RUSTC_SYSROOT/lib/rustlib/etc"
+++#RUSTC_SYSROOT=`rustc --print=sysroot`
+++#GDB_PYTHON_MODULE_DIRECTORY="$RUSTC_SYSROOT/lib/rustlib/etc"
+++# We can just hardcode this on Debian, and remove the rustc dependency
+++GDB_PYTHON_MODULE_DIRECTORY="/usr/share/rust-gdb"
++
++ # Run GDB with the additional arguments that load the pretty printers
++-PYTHONPATH="$PYTHONPATH:$GDB_PYTHON_MODULE_DIRECTORY" gdb \
+++PYTHONPATH="$PYTHONPATH:$GDB_PYTHON_MODULE_DIRECTORY" exec gdb \
++ -d "$GDB_PYTHON_MODULE_DIRECTORY" \
++ -iex "add-auto-load-safe-path $GDB_PYTHON_MODULE_DIRECTORY" \
++ "$@"
--- /dev/null
--- /dev/null
++Description: Hardcode LLDB python module directory
++ Debian package installs python modules into a fixed directory, so
++ just hardcode path in wrapper script.
++Author: Angus Lees <gus@debian.org>
++Forwarded: not-needed
++
++--- a/src/etc/rust-lldb
+++++ b/src/etc/rust-lldb
++@@ -12,7 +12,7 @@
++ # Exit if anything fails
++ set -e
++
++-LLDB_VERSION=`lldb --version 2>/dev/null | head -1 | cut -d. -f1`
+++LLDB_VERSION=`lldb-3.9 --version 2>/dev/null | head -1 | cut -d. -f1`
++
++ if [ "$LLDB_VERSION" = "lldb-350" ]
++ then
++@@ -29,13 +29,10 @@
++ # Make sure to delete the tempfile no matter what
++ trap "rm -f $TMPFILE; exit" INT TERM EXIT
++
++-# Find out where to look for the pretty printer Python module
++-RUSTC_SYSROOT=`rustc --print sysroot`
++-
++ # Write the LLDB script to the tempfile
++-echo "command script import \"$RUSTC_SYSROOT/lib/rustlib/etc/lldb_rust_formatters.py\"" >> $TMPFILE
+++echo "command script import \"/usr/share/rust-lldb/lldb_rust_formatters.py\"" >> $TMPFILE
++ echo "type summary add --no-value --python-function lldb_rust_formatters.print_val -x \".*\" --category Rust" >> $TMPFILE
++ echo "type category enable Rust" >> $TMPFILE
++
++ # Call LLDB with the script added to the argument list
++-lldb --source-before-file="$TMPFILE" "$@"
+++lldb-3.9 --source-before-file="$TMPFILE" "$@"
--- /dev/null
--- /dev/null
++Index: rustc.git/src/librustdoc/html/render.rs
++===================================================================
++--- rustc.git.orig/src/librustdoc/html/render.rs
+++++ rustc.git/src/librustdoc/html/render.rs
++@@ -656,8 +656,16 @@ fn write_shared(cx: &Context,
++ // Add all the static files. These may already exist, but we just
++ // overwrite them anyway to make sure that they're fresh and up-to-date.
++
++- write(cx.dst.join("jquery.js"),
++- include_bytes!("static/jquery-2.1.4.min.js"))?;
+++ {
+++ // In Debian, just copy the system jquery instead.
+++ // If the file gets installed, we can eventually create something like
+++ // dh_rustdoc, similar to dh_sphinxdoc to detect these copies and
+++ // convert them into symlinks.
+++ let jquery_system_path = "/usr/share/javascript/jquery/jquery.min.js";
+++ let jquery = cx.dst.join("jquery.js");
+++ let jquery = jquery.as_path();
+++ try_err!(fs::copy(jquery_system_path, jquery), &jquery);
+++ }
++ write(cx.dst.join("main.js"),
++ include_bytes!("static/main.js"))?;
++ write(cx.dst.join("rustdoc.css"),
--- /dev/null
--- /dev/null
++--- a/src/compiler-rt/lib/builtins/trunctfdf2.c
+++++ b/src/compiler-rt/lib/builtins/trunctfdf2.c
++@@ -7,6 +7,12 @@
++ //
++ //===----------------------------------------------------------------------===//
++
+++#if defined(__aarch64__) && (__GNUC__ <= 4) && (__GNUC_MINOR__ <= 8)
+++// work around https://launchpad.net/bugs/1667761
+++#pragma GCC push_options
+++#pragma GCC optimize "O1"
+++#endif
+++
++ #define QUAD_PRECISION
++ #include "fp_lib.h"
++
++@@ -20,3 +26,7 @@
++ }
++
++ #endif
+++
+++#if defined(__aarch64__) && (__GNUC__ <= 4) && (__GNUC_MINOR__ <= 8)
+++#pragma GCC pop_options
+++#endif
--- /dev/null
--- /dev/null
++# Patches for upstream
++# Ideally we would order these as follows:
++# [ applied already ], [ pending ], [ forwarded or to-be-forwarded ]
++u-reproducible-dl-stage0.patch
++u-ignoretest-armhf_01.patch
++u-ignoretest-armhf_02.patch
++u-ignoretest-armhf_03.patch
++u-ignoretest-armhf_04.patch
++u-ignoretest-arm64-stdcall.patch
++#u-ignoretest-i386.patch
++u-ignoretest-arm64.patch
++u-detect-mips-cpu.patch
++u-ignoretest-powerpc.patch
++#u-destdir-support.diff
++u-arm-on-64bit-kernel.diff
++
++# Debian-specific patches, not suitable for upstream
++d-rust-gdb-paths
++d-rust-lldb-paths
++d-add-soname.patch
++d-dont-download-stage0.patch
++d-fix-configure-for-deb-arches.patch
++d-dynamic-link-llvm.patch
++d-use-system-jquery.patch
++d-fill-in-mips-mk-rules.patch
++d-missing-ref-dlsym-ppc64el.patch
++
++# This might be useful for 1.16 when mk/ is deleted; however we need to figure
++# out how to apply the equivalent patch in a different file, as Makefile is a
++# generated file. For 1.15 mk/ still applies and all-no-docs still exists
++#d-disable-doc-build-in-all.diff
++
++gcc-4.8-aarch64-ice.diff
--- /dev/null
--- /dev/null
++Description: Support armhf running on a 64-bit kernel
++Author: Matthias Klose <doko@debian.org>
++Applied-Upstream: commit:0a55c8e659f0fc540b740101f7a02ab28e300aa4
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++Index: rust/configure
++===================================================================
++--- rust.orig/configure
+++++ rust/configure
++@@ -513,7 +513,7 @@ case $CFG_CPUTYPE in
++ CFG_OSTYPE="${CFG_OSTYPE}eabihf"
++ ;;
++
++- armv7l)
+++ armv7l | armv8l)
++ CFG_CPUTYPE=armv7
++ CFG_OSTYPE="${CFG_OSTYPE}eabihf"
++ ;;
++Index: rust/src/bootstrap/bootstrap.py
++===================================================================
++--- rust.orig/src/bootstrap/bootstrap.py
+++++ rust/src/bootstrap/bootstrap.py
++@@ -374,7 +374,7 @@ class RustBuild(object):
++ cputype = 'i686'
++ elif cputype in {'xscale', 'arm'}:
++ cputype = 'arm'
++- elif cputype == 'armv7l':
+++ elif cputype in {'armv7l', 'armv8l'}:
++ cputype = 'arm'
++ ostype += 'eabihf'
++ elif cputype == 'aarch64':
--- /dev/null
--- /dev/null
++diff --git a/src/bootstrap/compile.rs b/src/bootstrap/compile.rs
++index 04d01759a..90f3ae956 100644
++--- a/src/bootstrap/compile.rs
+++++ b/src/bootstrap/compile.rs
++@@ -187,7 +187,7 @@ pub fn rustc<'a>(build: &'a Build, target: &str, compiler: &Compiler<'a>) {
++ cargo.env("CFG_RELEASE", &build.release)
++ .env("CFG_RELEASE_CHANNEL", &build.config.channel)
++ .env("CFG_VERSION", &build.version)
++- .env("CFG_PREFIX", build.config.prefix.clone().unwrap_or(String::new()))
+++ .env("CFG_PREFIX", build.config.prefix.clone().unwrap_or(PathBuf::new()))
++ .env("CFG_LIBDIR_RELATIVE", "lib");
++
++ // If we're not building a compiler with debugging information then remove
++diff --git a/src/bootstrap/config.rs b/src/bootstrap/config.rs
++index 1f67b52db..e90d7ed24 100644
++--- a/src/bootstrap/config.rs
+++++ b/src/bootstrap/config.rs
++@@ -85,10 +85,10 @@ pub struct Config {
++ pub quiet_tests: bool,
++ // Fallback musl-root for all targets
++ pub musl_root: Option<PathBuf>,
++- pub prefix: Option<String>,
++- pub docdir: Option<String>,
++- pub libdir: Option<String>,
++- pub mandir: Option<String>,
+++ pub prefix: Option<PathBuf>,
+++ pub docdir: Option<PathBuf>,
+++ pub libdir: Option<PathBuf>,
+++ pub mandir: Option<PathBuf>,
++ pub codegen_tests: bool,
++ pub nodejs: Option<PathBuf>,
++ pub gdb: Option<PathBuf>,
++@@ -114,6 +114,7 @@ pub struct Target {
++ #[derive(RustcDecodable, Default)]
++ struct TomlConfig {
++ build: Option<Build>,
+++ install: Option<Install>,
++ llvm: Option<Llvm>,
++ rust: Option<Rust>,
++ target: Option<HashMap<String, TomlTarget>>,
++@@ -136,6 +137,15 @@ struct Build {
++ python: Option<String>,
++ }
++
+++/// TOML representation of various global install decisions.
+++#[derive(RustcDecodable, Default, Clone)]
+++struct Install {
+++ prefix: Option<String>,
+++ mandir: Option<String>,
+++ docdir: Option<String>,
+++ libdir: Option<String>,
+++}
+++
++ /// TOML representation of how the LLVM build is configured.
++ #[derive(RustcDecodable, Default)]
++ struct Llvm {
++@@ -260,6 +270,13 @@ impl Config {
++ set(&mut config.submodules, build.submodules);
++ set(&mut config.vendor, build.vendor);
++
+++ if let Some(ref install) = toml.install {
+++ config.prefix = install.prefix.clone().map(PathBuf::from);
+++ config.mandir = install.mandir.clone().map(PathBuf::from);
+++ config.docdir = install.docdir.clone().map(PathBuf::from);
+++ config.libdir = install.libdir.clone().map(PathBuf::from);
+++ }
+++
++ if let Some(ref llvm) = toml.llvm {
++ match llvm.ccache {
++ Some(StringOrBool::String(ref s)) => {
++@@ -277,6 +294,7 @@ impl Config {
++ set(&mut config.llvm_version_check, llvm.version_check);
++ set(&mut config.llvm_static_stdcpp, llvm.static_libstdcpp);
++ }
+++
++ if let Some(ref rust) = toml.rust {
++ set(&mut config.rust_debug_assertions, rust.debug_assertions);
++ set(&mut config.rust_debuginfo, rust.debuginfo);
++@@ -443,16 +461,16 @@ impl Config {
++ self.channel = value.to_string();
++ }
++ "CFG_PREFIX" => {
++- self.prefix = Some(value.to_string());
+++ self.prefix = Some(PathBuf::from(value));
++ }
++ "CFG_DOCDIR" => {
++- self.docdir = Some(value.to_string());
+++ self.docdir = Some(PathBuf::from(value));
++ }
++ "CFG_LIBDIR" => {
++- self.libdir = Some(value.to_string());
+++ self.libdir = Some(PathBuf::from(value));
++ }
++ "CFG_MANDIR" => {
++- self.mandir = Some(value.to_string());
+++ self.mandir = Some(PathBuf::from(value));
++ }
++ "CFG_LLVM_ROOT" if value.len() > 0 => {
++ let target = self.target_config.entry(self.build.clone())
++diff --git a/src/bootstrap/config.toml.example b/src/bootstrap/config.toml.example
++index 22542f873..b22d68ea2 100644
++--- a/src/bootstrap/config.toml.example
+++++ b/src/bootstrap/config.toml.example
++@@ -72,6 +72,9 @@
++ # specified, use this rustc binary instead as the stage0 snapshot compiler.
++ #rustc = "/path/to/bin/rustc"
++
+++# Instead of installing installing to /usr/local, install to this path instead.
+++#prefix = "/path/to/install"
+++
++ # Flag to specify whether any documentation is built. If false, rustdoc and
++ # friends will still be compiled but they will not be used to generate any
++ # documentation.
++diff --git a/src/bootstrap/install.rs b/src/bootstrap/install.rs
++index 9bc5a7c00..efc460f35 100644
++--- a/src/bootstrap/install.rs
+++++ b/src/bootstrap/install.rs
++@@ -13,9 +13,9 @@
++ //! This module is responsible for installing the standard library,
++ //! compiler, and documentation.
++
+++use std::env;
++ use std::fs;
++-use std::borrow::Cow;
++-use std::path::Path;
+++use std::path::{Path, PathBuf, Component};
++ use std::process::Command;
++
++ use Build;
++@@ -23,23 +23,35 @@ use dist::{package_vers, sanitize_sh, tmpdir};
++
++ /// Installs everything.
++ pub fn install(build: &Build, stage: u32, host: &str) {
++- let prefix = build.config.prefix.as_ref().clone().map(|x| Path::new(x))
++- .unwrap_or(Path::new("/usr/local"));
++- let docdir = build.config.docdir.as_ref().clone().map(|x| Cow::Borrowed(Path::new(x)))
++- .unwrap_or(Cow::Owned(prefix.join("share/doc/rust")));
++- let libdir = build.config.libdir.as_ref().clone().map(|x| Cow::Borrowed(Path::new(x)))
++- .unwrap_or(Cow::Owned(prefix.join("lib")));
++- let mandir = build.config.mandir.as_ref().clone().map(|x| Cow::Borrowed(Path::new(x)))
++- .unwrap_or(Cow::Owned(prefix.join("share/man")));
+++ let prefix_default = PathBuf::from("/usr/local");
+++ let docdir_default = PathBuf::from("share/doc/rust");
+++ let mandir_default = PathBuf::from("share/man");
+++ let libdir_default = PathBuf::from("lib");
+++ let prefix = build.config.prefix.as_ref().unwrap_or(&prefix_default);
+++ let docdir = build.config.docdir.as_ref().unwrap_or(&docdir_default);
+++ let libdir = build.config.libdir.as_ref().unwrap_or(&libdir_default);
+++ let mandir = build.config.mandir.as_ref().unwrap_or(&mandir_default);
+++
+++ let docdir = prefix.join(docdir);
+++ let libdir = prefix.join(libdir);
+++ let mandir = prefix.join(mandir);
+++
+++ let destdir = env::var_os("DESTDIR").map(PathBuf::from);
+++
+++ let prefix = add_destdir(&prefix, &destdir);
+++ let docdir = add_destdir(&docdir, &destdir);
+++ let libdir = add_destdir(&libdir, &destdir);
+++ let mandir = add_destdir(&mandir, &destdir);
+++
++ let empty_dir = build.out.join("tmp/empty_dir");
++ t!(fs::create_dir_all(&empty_dir));
++ if build.config.docs {
++- install_sh(&build, "docs", "rust-docs", stage, host, prefix,
+++ install_sh(&build, "docs", "rust-docs", stage, host, &prefix,
++ &docdir, &libdir, &mandir, &empty_dir);
++ }
++- install_sh(&build, "std", "rust-std", stage, host, prefix,
+++ install_sh(&build, "std", "rust-std", stage, host, &prefix,
++ &docdir, &libdir, &mandir, &empty_dir);
++- install_sh(&build, "rustc", "rustc", stage, host, prefix,
+++ install_sh(&build, "rustc", "rustc", stage, host, &prefix,
++ &docdir, &libdir, &mandir, &empty_dir);
++ t!(fs::remove_dir_all(&empty_dir));
++ }
++@@ -59,3 +71,17 @@ fn install_sh(build: &Build, package: &str, name: &str, stage: u32, host: &str,
++ .arg("--disable-ldconfig");
++ build.run(&mut cmd);
++ }
+++
+++fn add_destdir(path: &Path, destdir: &Option<PathBuf>) -> PathBuf {
+++ let mut ret = match *destdir {
+++ Some(ref dest) => dest.clone(),
+++ None => return path.to_path_buf(),
+++ };
+++ for part in path.components() {
+++ match part {
+++ Component::Normal(s) => ret.push(s),
+++ _ => {}
+++ }
+++ }
+++ return ret
+++}
--- /dev/null
--- /dev/null
++Description: Detect mips CPUs in ./configure
++ This basically recreates the logic that already exists in bootstrap.py
++ Endianness test from https://stackoverflow.com/questions/26859098/testing-endianness-of-system-with-the-unix-shell
++Author: Ximin Luo <infinity0@debian.org>
++Bug: https://github.com/rust-lang/rust/pull/38650
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++Index: rust/configure
++===================================================================
++--- rust.orig/configure
+++++ rust/configure
++@@ -388,6 +388,7 @@ msg "inspecting environment"
++
++ CFG_OSTYPE=$(uname -s)
++ CFG_CPUTYPE=$(uname -m)
+++ENDIAN=$(printf '\1' | od -dAn)
++
++ if [ $CFG_OSTYPE = Darwin -a $CFG_CPUTYPE = i386 ]
++ then
++@@ -549,6 +550,17 @@ case $CFG_CPUTYPE in
++ if [ "$ENDIAN" -eq 1 ]; then
++ CFG_CPUTYPE="${CFG_CPUTYPE}el"
++ elif [ "$ENDIAN" -ne 256 ]; then
+++ err "unknown endianness: $ENDIAN (expecting 1 for little or 256 for big)"
+++ fi
+++ ;;
+++
+++ mips | mips64)
+++ if [ "$CFG_CPUTYPE" = "mips64" ]; then
+++ CFG_OSTYPE="${CFG_OSTYPE}abi64"
+++ fi
+++ if [ "$ENDIAN" -eq 1 ]; then
+++ CFG_CPUTYPE="${CFG_CPUTYPE}el"
+++ elif [ "$ENDIAN" -ne 256 ]; then
++ err "unknown endianness: $ENDIAN (expecting 1 for little or 256 for big)"
++ fi
++ ;;
++Index: rust/src/test/run-pass/conditional-compile-arch.rs
++===================================================================
++--- rust.orig/src/test/run-pass/conditional-compile-arch.rs
+++++ rust/src/test/run-pass/conditional-compile-arch.rs
++@@ -28,6 +28,12 @@ pub fn main() { }
++ #[cfg(target_arch = "mips64")]
++ pub fn main() { }
++
+++#[cfg(target_arch = "mips")]
+++pub fn main() { }
+++
+++#[cfg(target_arch = "mips64")]
+++pub fn main() { }
+++
++ #[cfg(target_arch = "powerpc64")]
++ pub fn main() { }
++
--- /dev/null
--- /dev/null
++Description: Ignore failing stdcall test on arm64
++ Disable test that fails on Debian; "stdcall" is a win32 calling convention and
++ not supposed to work here anyway.
++Author: Ximin Luo <infinity0@debian.org>
++Bug: https://github.com/rust-lang/rust/issues/36348
++Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=837533
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++Index: rust/src/test/debuginfo/type-names.rs
++===================================================================
++--- rust.orig/src/test/debuginfo/type-names.rs
+++++ rust/src/test/debuginfo/type-names.rs
++@@ -363,7 +363,7 @@ fn main() {
++ let rust_fn_with_return_value = (rust_fn_with_return_value, 0_usize);
++ let extern_c_fn_with_return_value = (extern_c_fn_with_return_value, 0_usize);
++ let unsafe_fn_with_return_value = (unsafe_fn_with_return_value, 0_usize);
++- let extern_stdcall_fn_with_return_value = (extern_stdcall_fn_with_return_value, 0_usize);
+++// let extern_stdcall_fn_with_return_value = (extern_stdcall_fn_with_return_value, 0_usize);
++
++ let generic_function_int = (generic_function::<isize>, 0_usize);
++ let generic_function_struct3 = (generic_function::<mod1::mod2::Struct3>, 0_usize);
--- /dev/null
--- /dev/null
++Index: rust/src/test/run-pass-valgrind/down-with-thread-dtors.rs
++===================================================================
++--- rust.orig/src/test/run-pass-valgrind/down-with-thread-dtors.rs
+++++ rust/src/test/run-pass-valgrind/down-with-thread-dtors.rs
++@@ -8,6 +8,7 @@
++ // option. This file may not be copied, modified, or distributed
++ // except according to those terms.
++
+++// ignore-aarch64
++ // no-prefer-dynamic
++ // ignore-emscripten
++
--- /dev/null
--- /dev/null
++Description: Ignore atomic-lock-free tests on armhf
++Author: Ximin Luo <infinity0@debian.org>
++Bug: https://github.com/rust-lang/rust/issues/40238
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/src/test/run-make/atomic-lock-free/Makefile
+++++ b/src/test/run-make/atomic-lock-free/Makefile
++@@ -5,6 +5,7 @@
++
++ all:
++ ifeq ($(UNAME),Linux)
+++ifeq (,$(filter armv7-unknown-linux-gnueabihf,$(TARGET)))
++ ifeq ($(filter x86,$(LLVM_COMPONENTS)),x86)
++ $(RUSTC) --target=i686-unknown-linux-gnu atomic_lock_free.rs
++ nm "$(TMPDIR)/libatomic_lock_free.rlib" | grep -vq __atomic_fetch_add
++@@ -40,3 +41,4 @@
++ nm "$(TMPDIR)/libatomic_lock_free.rlib" | grep -vq __atomic_fetch_add
++ endif
++ endif
+++endif
--- /dev/null
--- /dev/null
++Description: Disable some relocation-model tests for armhf
++Author: Ximin Luo <infinity0@debian.org>
++Bug: https://github.com/rust-lang/rust/issues/40145
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/src/test/run-make/relocation-model/Makefile
+++++ b/src/test/run-make/relocation-model/Makefile
++@@ -1,17 +1,22 @@
++ -include ../tools.mk
++
++ all: others
+++ifneq ($(filter arm,$(LLVM_COMPONENTS)),arm)
+++# FIXME(#40145)
++ $(RUSTC) -C relocation-model=dynamic-no-pic foo.rs
++ $(call RUN,foo)
++
++ $(RUSTC) -C relocation-model=default foo.rs
++ $(call RUN,foo)
++-
+++endif
++ $(RUSTC) -C relocation-model=dynamic-no-pic --crate-type=dylib foo.rs --emit=link,obj
++
++ ifdef IS_MSVC
++ # FIXME(#28026)
++ others:
+++else ifeq ($(filter arm,$(LLVM_COMPONENTS)),arm)
+++# FIXME(#40145)
+++others:
++ else
++ others:
++ $(RUSTC) -C relocation-model=static foo.rs
--- /dev/null
--- /dev/null
++Description: Disable reference.md "Items_and_attributes_15" doctest, failing on armhf
++ This passes on i386 amd64 arm64
++ .
++ See https://gist.github.com/infinity0/2f5452d4ee9deb2f1bacb8b39c987c9c
++ for thread stacktrace from 1.10.0 when it hung instead of failed; eddyb from
++ #rustc suggested this might be an LLVM issue.
++Author: Ximin Luo <infinity0@debian.org>
++Bug: https://github.com/rust-lang/rust/issues/40260
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++Index: rustc.git/src/doc/reference.md
++===================================================================
++--- rustc.git.orig/src/doc/reference.md
+++++ rustc.git/src/doc/reference.md
++@@ -1133,7 +1133,7 @@ bodies defined in Rust code _can be call
++ in the same way as any other Rust function, except that they have the `extern`
++ modifier.
++
++-```
+++```{.ignore}
++ // Declares an extern fn, the ABI defaults to "C"
++ extern fn new_i32() -> i32 { 0 }
++
--- /dev/null
--- /dev/null
++Description: Disable failing test on armhf, fails with signal 7
++Author: Ximin Luo <infinity0@debian.org>
++Bug: https://github.com/rust-lang/rust/issues/40444
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/src/test/run-pass/packed-struct-vec.rs
+++++ b/src/test/run-pass/packed-struct-vec.rs
++@@ -8,6 +8,8 @@
++ // option. This file may not be copied, modified, or distributed
++ // except according to those terms.
++
+++// ignore-arm
+++
++ use std::mem;
++
++ #[repr(packed)]
--- /dev/null
--- /dev/null
++Index: rustc.git/src/test/run-make/no-duplicate-libs/main.rs
++===================================================================
++--- rustc.git.orig/src/test/run-make/no-duplicate-libs/main.rs
+++++ rustc.git/src/test/run-make/no-duplicate-libs/main.rs
++@@ -8,6 +8,8 @@
++ // option. This file may not be copied, modified, or distributed
++ // except according to those terms.
++
+++// ignore-test
+++
++ #[link(name = "foo")]
++ #[link(name = "bar")]
++ #[link(name = "foo")]
++Index: rustc.git/src/test/run-make/no-duplicate-libs/Makefile
++===================================================================
++--- rustc.git.orig/src/test/run-make/no-duplicate-libs/Makefile
+++++ rustc.git/src/test/run-make/no-duplicate-libs/Makefile
++@@ -5,8 +5,8 @@ ifdef IS_MSVC
++ all:
++ else
++ all:
++- $(RUSTC) foo.rs
++- $(RUSTC) bar.rs
++- $(RUSTC) main.rs
++- $(call RUN,main)
+++# $(RUSTC) foo.rs
+++# $(RUSTC) bar.rs
+++# $(RUSTC) main.rs
+++# $(call RUN,main)
++ endif
--- /dev/null
--- /dev/null
++Description: Ignore ASM tests on powerpc
++Author: Erwan Prioul <erwan@linux.vnet.ibm.com>
++Applied-Upstream: commit:1572bf104dbf65d58bd6b889fa46229c9b92d6f9
++
++Index: rust/src/test/compile-fail/asm-bad-clobber.rs
++===================================================================
++--- rust.orig/src/test/compile-fail/asm-bad-clobber.rs
+++++ rust/src/test/compile-fail/asm-bad-clobber.rs
++@@ -13,6 +13,7 @@
++ // ignore-aarch64
++ // ignore-s390x
++ // ignore-emscripten
+++// ignore-powerpc
++
++ #![feature(asm, rustc_attrs)]
++
++Index: rust/src/test/compile-fail/asm-in-bad-modifier.rs
++===================================================================
++--- rust.orig/src/test/compile-fail/asm-in-bad-modifier.rs
+++++ rust/src/test/compile-fail/asm-in-bad-modifier.rs
++@@ -10,6 +10,7 @@
++
++ // ignore-s390x
++ // ignore-emscripten
+++// ignore-powerpc
++
++ #![feature(asm)]
++
++Index: rust/src/test/compile-fail/asm-out-assign-imm.rs
++===================================================================
++--- rust.orig/src/test/compile-fail/asm-out-assign-imm.rs
+++++ rust/src/test/compile-fail/asm-out-assign-imm.rs
++@@ -10,6 +10,7 @@
++
++ // ignore-s390x
++ // ignore-emscripten
+++// ignore-powerpc
++
++ #![feature(asm)]
++
++Index: rust/src/test/compile-fail/asm-out-no-modifier.rs
++===================================================================
++--- rust.orig/src/test/compile-fail/asm-out-no-modifier.rs
+++++ rust/src/test/compile-fail/asm-out-no-modifier.rs
++@@ -10,6 +10,7 @@
++
++ // ignore-s390x
++ // ignore-emscripten
+++// ignore-powerpc
++
++ #![feature(asm)]
++
++Index: rust/src/test/compile-fail/asm-out-read-uninit.rs
++===================================================================
++--- rust.orig/src/test/compile-fail/asm-out-read-uninit.rs
+++++ rust/src/test/compile-fail/asm-out-read-uninit.rs
++@@ -10,6 +10,7 @@
++
++ // ignore-s390x
++ // ignore-emscripten
+++// ignore-powerpc
++
++ #![feature(asm)]
++
++Index: rust/src/test/compile-fail/asm-misplaced-option.rs
++===================================================================
++--- rust.orig/src/test/compile-fail/asm-misplaced-option.rs
+++++ rust/src/test/compile-fail/asm-misplaced-option.rs
++@@ -13,6 +13,7 @@
++ // ignore-aarch64
++ // ignore-s390x
++ // ignore-emscripten
+++// ignore-powerpc
++
++ #![feature(asm, rustc_attrs)]
++
--- /dev/null
--- /dev/null
++Index: rust/src/bootstrap/bootstrap.py
++===================================================================
++--- rust.orig/src/bootstrap/bootstrap.py
+++++ rust/src/bootstrap/bootstrap.py
++@@ -72,7 +72,7 @@ def download(path, url, probably_big, ve
++ option = "-#"
++ else:
++ option = "-s"
++- run(["curl", option, "--retry", "3", "-Sf", "-o", path, url], verbose=verbose)
+++ run(["curl", option, "-R", "--retry", "3", "-Sf", "-o", path, url], verbose=verbose)
++
++
++ def verify(path, sha_path, verbose):
--- /dev/null
--- /dev/null
++#!/usr/bin/make -f
++# -*- makefile -*-
++
++include /usr/share/dpkg/pkg-info.mk
++include /usr/share/dpkg/architecture.mk
++include /usr/share/dpkg/buildflags.mk
++#RUSTFLAGS = -C link-args="$(LDFLAGS)"
++# temporary workaround for https://github.com/rust-lang/rust/issues/31529
++# this will FAIL if LDFLAGS itself contains shell-interpreted chars beyond
++# unquoted spaces (that addprefix works around the failure of)
++RUSTFLAGS = $(addprefix -C link-args=,$(LDFLAGS))
++export CFLAGS CXXFLAGS CPPFLAGS LDFLAGS RUSTFLAGS
++
++# see https://github.com/rust-lang/rust/issues/37320
++# it should be possible to remove this in the next Debian release
++export MALLOC_CONF = lg_dirty_mult:-1
++
++# Defines DEB_*_RUST_TYPE triples
++include debian/architecture.mk
++
++# Uncomment this to turn on verbose mode.
++#export DH_VERBOSE=1
++
++# When using sudo pbuilder, this will cause mk/install.mk to run sudo,
++# but we don't need sudo as a build-dep for the package if we unexport
++# the SUDO_USER variable.
++unexport SUDO_USER
++
++# src/rt/miniz.c (incorrectly) triggers -Wmisleading-indentation with
++# gcc-6. See bug #811573.
++CFLAGS += -Wno-misleading-indentation
++
++# Release type (one of beta, stable or nightly)
++RELEASE_CHANNEL := stable
++# See also ./build-preview-dsc.sh for a script that builds a beta/nightly .dsc
++# out of this packaging. Furthermore, if the build breaks after importing a new
++# upstream stable release, check the do_temporary_fixup function in that file
++# to see if we already know what fix to make.
++
++DEB_DESTDIR := $(CURDIR)/debian/tmp
++
++RUST_VERSION := $(shell dpkg-parsechangelog --show-field Version | sed -re 's/([^.]+)\.([^.]+)\..*/\1.\2/')
++LIBSTD_PKG := libstd-rust-$(RUST_VERSION)
++
++# These are the normal build flags
++DEB_CONFIGURE_FLAGS = \
++ --host=$(DEB_HOST_RUST_TYPE) \
++ --target=$(DEB_TARGET_RUST_TYPE) \
++ --disable-manage-submodules \
++ --disable-rustbuild \
++ --release-channel=$(RELEASE_CHANNEL) \
++ --prefix=/usr
++
++# Use system LLVM (comment out to use vendored LLVM)
++OLD_LLVM_VERSION = 3.8
++DEB_CONFIGURE_FLAGS += --llvm-root=/usr/lib/llvm-3.9
++
++# Below we detect how we're supposed to bootstrap the stage0 compiler. See
++# README.Debian for more details of the cases described below.
++#
++# Sed expression that matches the "rustc" we have in our Build-Depends field
++SED_RUSTC_BUILDDEP := /^Build-Depends:/,/^[^[:space:]\#]/{/\s*rustc.*,/$$action}
++PRECONFIGURE_CHECK = :
++HAVE_BINARY_TARBALL := $(shell ls -1 dl/*$(DEB_HOST_RUST_TYPE)* 2>/dev/null | wc -l)
++# allow not using the binary tarball although it exists
++#ifneq (,$(filter $(DEB_HOST_ARCH), amd64 arm64 armhf i386 powerpc ppc64el s390x))
++# HAVE_BINARY_TARBALL := 0
++#endif
++ifeq (0,$(HAVE_BINARY_TARBALL))
++ # Case A (Building from source): the extracted source tree does not include
++ # a bootstrapping tarball for the current architecture e.g. because the
++ # distro already has a rustc for this arch, or the uploader expects that
++ # this requirement be fulfilled in some other way.
++ #
++ # Case A-1: the builder did not select the "pkg.rustc.dlstage0" build profile.
++ # In this case, we use the distro's rustc - either the previous or current version.
++ ifeq (,$(findstring pkg.rustc.dlstage0,$(DEB_BUILD_PROFILES)))
++ DEB_CONFIGURE_FLAGS += --enable-local-rust --local-rust-root=/usr
++ endif
++ #
++ # Case A-2: the builder selected the "dlstage0" build profile.
++ # In this case, the rust build scripts will download a stage0 into dl/ and use that.
++ # We don't need to do anything specific in this build file, so this case is empty.
++else
++ # Case B (Bootstrapping a new distro): the extracted source tree does
++ # include a bootstrapping tarball for the current architecture; see the
++ # `source_orig-dl` target below on how to build this.
++ #
++ # In this case, we'll bootstrap from the stage0 given in that tarball.
++ # To ensure the uploader of the .dsc didn't make a mistake, we first check
++ # that rustc isn't a Build-Depends for the current architecture.
++ ifneq (,$(shell action=p; sed -ne "$(SED_RUSTC_BUILDDEP)" debian/control))
++ ifeq (,$(shell action=p; sed -ne "$(SED_RUSTC_BUILDDEP)" debian/control | grep '!$(DEB_HOST_ARCH)'))
++ PRECONFIGURE_CHECK = $(error found matches for dl/*$(DEB_HOST_RUST_TYPE)*, \
++ but rustc might be a Build-Depends for $(DEB_HOST_ARCH))
++ endif
++ endif
++endif
++
++BUILD_DOCS = 1
++ifneq (,$(findstring nodoc,$(DEB_BUILD_PROFILES)))
++ DEB_CONFIGURE_FLAGS += --disable-docs
++ BUILD_DOCS =
++endif
++
++ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
++ DEB_CONFIGURE_FLAGS += --disable-optimize --disable-optimize-cxx --disable-optimize-llvm
++endif
++
++# Workaround for powerpc64le: no optimization
++# TODO: can remove when https://github.com/rust-lang/rust/issues/39015 is fixed
++ifneq (,$(findstring powerpc64le,$(DEB_TARGET_RUST_TYPE)))
++ DEB_CONFIGURE_FLAGS += --disable-optimize --disable-optimize-cxx --disable-optimize-llvm
++endif
++
++
++%:
++ dh $@ --parallel
++
++# Note: SHELL is not set by dash, but the configure script wants to use it
++override_dh_auto_configure:
++ # fail the build if we have any instances of OLD_LLVM_VERSION in debian, except for debian/changelog
++ ! grep --color=always -i 'll...$(OLD_LLVM_VERSION)' --exclude=changelog -R debian
++ $(PRECONFIGURE_CHECK)
++ SHELL=/bin/sh PATH="$$PWD/debian/bin:$$PATH" DEB_HOST_ARCH="$(DEB_HOST_ARCH)" \
++ ./configure $(DEB_CONFIGURE_FLAGS)
++
++override_dh_auto_clean:
++ set -e; \
++ if [ -f Makefile ]; then \
++ $(MAKE) clean-all; \
++ $(RM) Makefile config.stamp config.mk; \
++ fi
++ $(RM) src/rt/hoedown/src/html_blocks.c # clean up after building this ourselves
++ $(RM) src/bootstrap/bootstrap.pyc
++ rm -rf src/etc/__pycache__ *-linux-gnu* config.tmp
++ rm -f dl/rustc-1.14.0-arm-unknown-linux-gnueabihf.tar.gz
++
++# upstream bundles this in the source, but in Debian we rebuild everything yo
++generate-sources:
++ $(MAKE) -C src/rt/hoedown src/html_blocks.c
++
++override_dh_auto_build-arch: generate-sources
++ dh_auto_build -- all VERBOSE=1
++
++# note: this is only for buildds that want to do a separate arch:all build;
++# there is no point running this yourself "to save time" since it implicitly
++# depends on build-arch anyways.
++override_dh_auto_build-indep: generate-sources
++ifneq (,$(BUILD_DOCS))
++ dh_auto_build -- docs VERBOSE=1
++endif
++
++override_dh_auto_install:
++ #rm -rf armv7-unknown-linux-gnueabihf
++ dh_auto_install --destdir=$(DEB_DESTDIR)
++
++ #upstream build produces both armv6 and armv7 stuff and installs a
++ #mixture of both. Fix things up so that only the armv6 stuff ends up
++ #in the packages.
++ cp arm-unknown-linux-gnueabihf/stage2/bin/rustc debian/tmp/usr/bin/
++ cp arm-unknown-linux-gnueabihf/stage2/bin/rustdoc debian/tmp/usr/bin/
++ cp arm-unknown-linux-gnueabihf/stage2/lib/*.so debian/tmp/usr/lib/
++ rm -rf debian/tmp/usr/lib/rustlib/*armv7-unknown-linux-gnueabihf
++
++ mkdir -p $(DEB_DESTDIR)/usr/lib/$(DEB_HOST_MULTIARCH)/
++ mv $(DEB_DESTDIR)/usr/lib/lib*.so $(DEB_DESTDIR)/usr/lib/$(DEB_HOST_MULTIARCH)/
++
++ # Replace duplicated compile-time/run-time dylibs with symlinks
++ @set -e; \
++ for f in $(DEB_DESTDIR)/usr/lib/rustlib/$(DEB_HOST_RUST_TYPE)/lib/lib*.so; do \
++ name=$${f##*/}; \
++ if [ -f "$(DEB_DESTDIR)/usr/lib/$(DEB_HOST_MULTIARCH)/$$name" ]; then \
++ echo "ln -sf ../../../$(DEB_HOST_MULTIARCH)/$$name $$f"; \
++ ln -sf ../../../$(DEB_HOST_MULTIARCH)/$$name $$f; \
++ fi; \
++ done
++
++ifneq (,$(BUILD_DOCS))
++ # Brute force to remove privacy-breach-logo lintian warning.
++ # We could have updated the upstream sources but it would complexify
++ # the rebase
++ @set -e; \
++ find $(DEB_DESTDIR)/usr/share/doc/rust/html -iname '*.html' | \
++ while read file; do \
++ topdir=$$(echo "$$file" | sed 's,^$(DEB_DESTDIR)/usr/share/doc/rust/html/,,; s,/[^/]*$$,/,; s,^[^/]*$$,,; s,[^/]\+/,../,g'); \
++ sed -i -e "s,https://doc.rust-lang.org/\(favicon.ico\|logos/rust-logo-32x32-blk.png\),$${topdir}rust-logo-32x32-blk.png," \
++ -e "s,https://www.rust-lang.org/\(favicon.ico\|logos/rust-logo-32x32-blk.png\),$${topdir}rust-logo-32x32-blk.png," "$$file"; \
++ done
++ find $(DEB_DESTDIR) \( -iname '*.html' -empty -o -name .lock -o -name '*.inc' \) -delete
++endif
++
++override_dh_install-arch:
++ dh_install
++ dh_install -p$(LIBSTD_PKG) usr/lib/$(DEB_HOST_MULTIARCH)/
++
++override_dh_install-indep:
++ dh_install
++ chmod -x \
++ debian/rust-gdb/usr/share/rust-gdb/*.py \
++ debian/rust-lldb/usr/share/rust-lldb/*.py
++
++override_dh_installchangelogs:
++ dh_installchangelogs RELEASES.md
++
++override_dh_installdocs:
++ dh_installdocs -X.tex -X.aux -X.log -X.out -X.toc
++
++override_dh_compress:
++ dh_compress -X.woff
++
++override_dh_auto_test-arch:
++ifeq (, $(filter nocheck,$(DEB_BUILD_OPTIONS)))
++# Use non-parallel $(MAKE) here instead of dh_auto_test, otherwise the upstream
++# Makefile will try to run N instances of the testrunner each of which will run
++# N instances of rustc (there is also parallel logic in libtest.rs already).
++ if RUST_BACKTRACE=1 $(MAKE) VERBOSE=1 check; then \
++ : ; \
++ elif [ $(DEB_DISTRIBUTION) = "unstable" ]; then \
++ false; \
++ else \
++ echo "====================================================="; \
++ echo "WARNING: Ignoring test failures in the rust testsuite"; \
++ echo "====================================================="; \
++ fi
++endif
++
++# No tests are applicable when only building arch:all packages.
++# More specifically: when we do an arch-all build, some crates are not built.
++# This makes some arch-dependent tests fail, so don't run them here.
++override_dh_auto_test-indep:
++ true
++
++override_dh_makeshlibs:
++ dh_makeshlibs -V
++
++ # dh_makeshlibs doesn't support our "libfoo-version.so" naming
++ # structure, so we have to do this ourselves.
++ install -o 0 -g 0 -d debian/$(LIBSTD_PKG)/DEBIAN
++ LC_ALL=C ls debian/$(LIBSTD_PKG)/usr/lib/$(DEB_HOST_MULTIARCH)/lib*.so | \
++ sed -n 's,^.*/\(lib.*\)-\(.\+\)\.so$$,\1 \2,p' | \
++ while read name version; do \
++ echo "$$name $$version $(LIBSTD_PKG) (>= $(DEB_VERSION_UPSTREAM))"; \
++ done > debian/$(LIBSTD_PKG)/DEBIAN/shlibs
++ chmod 644 debian/$(LIBSTD_PKG)/DEBIAN/shlibs
++ chown 0:0 debian/$(LIBSTD_PKG)/DEBIAN/shlibs
++
++override_dh_shlibdeps:
++ dh_shlibdeps -- -x$(LIBSTD_PKG)
++
++QUILT_SPECIAL_SNOWFLAKE_RETURN_CODE = x=$$?; if [ $$x = 2 ]; then exit 0; else exit $$x; fi
++source_orig-dl:
++ QUILT_PATCHES=debian/patches quilt push -aq; $(QUILT_SPECIAL_SNOWFLAKE_RETURN_CODE)
++ $(MAKE) -f debian/rules clean
++ debian/make_orig-dl_tarball.sh
++ QUILT_PATCHES=debian/patches quilt pop -aq; $(QUILT_SPECIAL_SNOWFLAKE_RETURN_CODE)
++ rm -rf .pc
--- /dev/null
--- /dev/null
++Document: rust-book
++Title: The Rust Programming Language
++Section: Programming/Rust
++Abstract:
++ This book will teach you about the Rust Programming Language. Rust is
++ a modern systems programming language focusing on safety and speed. It
++ accomplishes these goals by being memory safe without using garbage
++ collection.
++
++Format: HTML
++Index: /usr/share/doc/rust-doc/html/book/index.html
++Files: /usr/share/doc/rust-doc/html/book/*.html
--- /dev/null
--- /dev/null
++Document: rust-intro
++Title: The Rust Guide
++Section: Programming/Rust
++Abstract:
++ This introduction will give you a rough idea of what Rust is like,
++ eliding many details.
++
++Format: HTML
++Index: /usr/share/doc/rust-doc/html/intro.html
++Files: /usr/share/doc/rust-doc/html/intro.html
--- /dev/null
--- /dev/null
++Document: rust-reference
++Title: The Rust Reference
++Section: Programming/Rust
++Abstract:
++ This document is the primary reference for the Rust programming
++ language.
++
++Format: HTML
++Index: /usr/share/doc/rust-doc/html/reference.html
++Files: /usr/share/doc/rust-doc/html/reference.html
--- /dev/null
--- /dev/null
++debian/tmp/usr/share/doc/rust/html
--- /dev/null
--- /dev/null
++debian/icons/rust-logo-32x32-blk.png usr/share/doc/rust-doc/html/
--- /dev/null
--- /dev/null
++# This should eventually become part of a dh_rustdoc program.
++# Something that does e.g.
++# find $(DESTDIR) -name jquery.js -execdir ln -sf -T \
++# /usr/share/doc/rust-doc/html/jquery.js '{}' \;
++usr/share/javascript/jquery/jquery.js usr/share/doc/rust-doc/html/jquery.js
--- /dev/null
--- /dev/null
++src/etc/rust-gdb usr/bin/
++src/etc/gdb_*.py usr/share/rust-gdb/
++src/etc/debugger_pretty_printers_common.py usr/share/rust-gdb/
--- /dev/null
--- /dev/null
++usr/share/man/man1/gdb.1.gz usr/share/man/man1/rust-gdb.1.gz
--- /dev/null
--- /dev/null
++src/etc/rust-lldb usr/bin/
++src/etc/lldb_rust_formatters.py usr/share/rust-lldb/
++src/etc/debugger_pretty_printers_common.py usr/share/rust-lldb/
--- /dev/null
--- /dev/null
++usr/share/man/man1/lldb-3.9.1.gz usr/share/man/man1/rust-lldb.1.gz
--- /dev/null
--- /dev/null
++usr/bin/rustc
++usr/bin/rustdoc
++debian/architecture.mk usr/share/rustc/
--- /dev/null
--- /dev/null
++# We need it for now
++binary-or-shlib-defines-rpath usr/bin/rustc /usr/lib/rustlib/*/lib
++binary-or-shlib-defines-rpath usr/bin/rustdoc /usr/lib/rustlib/*/lib
--- /dev/null
--- /dev/null
++debian/tmp/usr/share/man/man1/rustc.1
++debian/tmp/usr/share/man/man1/rustdoc.1
++
--- /dev/null
--- /dev/null
++3.0 (quilt)
--- /dev/null
--- /dev/null
++debian/icons/rust-logo-32x32-blk.png
++# if you are here because dpkg-source told you to "add dl/rustc-** in d/source/include-binaries",
++# ignore that instruction and instead:
++# a) if you want to use the orig-dl for your next upload, then extract it into dl/
++# b) if you don't want to use it, then rename "../rustc_${version}.orig-dl.tar.xz" to something else
++# see also d/source/options and d/source/local-options and #577113.
--- /dev/null
--- /dev/null
++# this helps to prevent accidentally including the orig-dl tarball in a non
++# orig-dl upload, after running `debian/rules source_orig-dl`.
++# we can get rid of this after #577113 is fixed
++include-removal
--- /dev/null
--- /dev/null
++#!/bin/bash
++prev_stable() {
++local V=$1
++python -c 'import sys; k=map(int,sys.argv[1].split(".")); k[1]-=1; print ".".join(map(str,k))' "$V"
++}
++
++update() {
++local ORIG=$1 NEW=$2
++
++ORIG_M1=$(prev_stable $ORIG)
++NEW_M1=$(prev_stable $NEW)
++ORIG_R="${ORIG/./\\.}" # match a literal dot, otherwise this might sometimes match e.g. debhelper (>= 9.20141010)
++
++sed -i -e "s|libstd-rust-${ORIG_R}|libstd-rust-$NEW|g" \
++ -e "s|rustc (<= ${ORIG_R}|rustc (<= $NEW|g" \
++ -e "s|rustc (>= ${ORIG_M1/./\\.}|rustc (>= ${NEW_M1}|g" control
++
++git mv libstd-rust-$ORIG.lintian-overrides libstd-rust-$NEW.lintian-overrides
++sed -i -e "s|libstd-rust-${ORIG_R}|libstd-rust-$NEW|g" libstd-rust-$NEW.lintian-overrides
++}
++
++update 1.15 1.16
--- /dev/null
--- /dev/null
++-----BEGIN PGP PUBLIC KEY BLOCK-----
++Version: GnuPG v1
++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++=5FXw
++-----END PGP PUBLIC KEY BLOCK-----
--- /dev/null
--- /dev/null
++version=4
++
++opts="\
++pgpsigurlmangle=s/$/.asc/,\
++uversionmangle=s/(\d)[_.+-]?((beta|alpha)\.?\d*)$/$1~$2/,\
++dversionmangle=s/\+dfsg\d*$//,\
++repack,\
++repacksuffix=+dfsg1,\
++compression=xz,\
++" \
++ https://www.rust-lang.org/en-US/other-installers.html \
++ (?:.*/)rustc?-(\d[\d.]*(?:-[\w.]+)?)-src\.tar\.gz
projects / rustc.git / commitdiff
