[dgit import tarball trafficserver 8.1.9+ds-1~deb11u1 trafficserver_8.1.9+ds-1~deb11u1.debian.tar.xz]
--- /dev/null
+trafficserver for Debian
+------------------------
+
+Here are some configuration hints related to Traffic Server. Unless you already
+noted, configuration files are located in /etc/trafficserver. Traffic Server
+has some uncommon behaviour here: Please note, those files are generated auto-
+matically and some may not even be intended to be edited manually. Moreover it
+will rotate and synchronize configuration files if you run a cluster. Hence be
+careful when editing them, chances are Traffic Server WILL OVERWRITE them. This
+is especially true for comments which are not kept when using `traffic_line'
+(as explained below).
+
+* To get a general idea about traffic server and its architecture, read [4]. It
+ is crucial to understand the internal architecture before trying to start.
+
+* The main configuration file is `records.config'. You may either edit the main
+ configuration file by hand, but it is suggested to use the `traffic_line'
+ command instead. More on editing configuration files can be found on [1]. The
+ `traffic_line' command is used like this:
+
+ traffic_line -s proxy.config.proxy_name -v www.example.com
+
+ You might need to tell Traffic Server about your changes. If it is already
+ running use `traffic_line -x' to inform it about your changes. Please note
+ that you must restart your `traffic_server' daemon for some changes.
+
+* If you used Squid before you might find [2] helpful which lists Traffic Serv-
+ er configuration directives along their Squid equivalent. Use this as resour-
+ ce to understand Traffic Server.
+
+* To help you to get started, I am going to introduce you very briefly to Traf-
+ fic Server. Note, lines starting with `#' are remarks:
+
+ Open `records.config'.
+
+ # Configure the cluster interface
+ CONFIG proxy.config.cluster.ethernet_interface STRING eth0
+
+
+ # You may also want to bind your proxy server to a specific IP:
+ # Please note the security warning below as well
+ CONFIG proxy.local.incoming_ip_to_bind 1.2.3.4
+
+ # Next configure the listening port for incoming connections
+ CONFIG proxy.config.http.server_port INT 80
+
+ # Now tell Traffic Server how much Memory it is allowed to consume
+ # Set this value to -1 for best results which will instruct Traffic Server
+ # to consume roughly 1 MB for each GB of your disk backend storage size
+ # for memory caching. If you can afford it, go on and trash as much as
+ # you want and put here any positive value indicating the memory cache
+ # in bytes.
+ CONFIG proxy.config.cache.ram_cache.size LLONG 131072 # (128 MB)
+
+ Next edit `storage.config'. Debian ships with a default configuration poin-
+ ting to a cache file in `/var/cache/trafficserver' sized 256MB. This is fair-
+ ly ok for testing, otherwise feel free to change (value is in KB):
+
+ /var/cache/trafficserver 262144
+
+ Finally open `remap.config' where you need to tell Traffic Server about
+ your origin server(s):
+
+ map http://www.example.com/ http://www.example.com:8080/
+ # ---------------------- ----------------------------
+ # ^- This is your client This is your origin -^
+ # Host: header that server.
+ # is to be mappend
+
+* For a more comprehensive documentation about Traffic Server and its configu-
+ ration directives consult [3].
+
+ Yet the documentation on the web page can not be considered up to date for some
+ parts. Feel free to ask for help on the Apache Traffic Server mailing list:
+
+ E-Mail <users@trafficserver.apache.org>
+ URL: <http://mail-archives.apache.org/mod_mbox/trafficserver-users/>
+
+ More information may be found on either resource among those:
+ Project Website: <http://trafficserver.apache.org/>
+ IRC: #traffic-server on irc.freenode.net.
+ Project Wiki: https://cwiki.apache.org/TS/traffic-server.html
+
+* Traffic Server can basically act in two modes: As forward proxy and as a rever-
+ se proxy. Traffic Servers primary purpose is to act as reverse proxy (e.g.
+ different to Squid). Nonetheless you can Traffic Server still instruct to act
+ as forward proxy as well. If you know what you are doing, you need to set
+
+ CONFIG proxy.config.url_remap.remap_required INT 0
+
+ for that purpose.
+
+
+[1] https://docs.trafficserver.apache.org/en/latest/admin-guide/configuring-traffic-server.en.html
+[2] https://cwiki.apache.org/confluence/display/TS/SquidConfigTranslation
+[3] https://docs.trafficserver.apache.org/en/latest/admin-guide/files/records.config.en.html
+[4] https://docs.trafficserver.apache.org/en/latest/admin-guide/introduction.en.html
+
+ -- Arno Töll <debian@toell.net> Wed, 21 Mar 2012 14:10:21 +0100
--- /dev/null
+trafficserver (6.0.0-3) unstable; urgency=medium
+
+ If you are using 32-bits package, please not that upstream has
+ discontinued 32-bit support.
+ 32-bits Debian package will still be built, but is subject to removal
+ whenever 32-bit fails.
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Mon, 14 Dec 2015 10:29:12 +0100
+
+trafficserver (3.0.0-1) unstable; urgency=low
+
+ If you are upgrading from v2.1.8 or earlier to ATS 3.0 you need to migrate
+ to the new `records.config' configuration file. If possible, let Debian
+ overwrite your `records.config' configuration file.
+
+ Moreover you should clear all caches after upgrading (e.g. do "traffic_server
+ -Cclear").
+
+ The host.db data abse isn't required anymore. Therefore you can delete
+ `/etc/trafficserver/internal/hostdb.config' and `/var/cache/trafficserver/
+ host.db'.
+
+ -- Arno Töll <debian@toell.net> Wed, 15 Jun 2011 16:23:13 +0200
--- /dev/null
+trafficserver for Debian
+------------------------
+
+* ATS 8.0.0 comes with slight changes in config files.
+ Following ones has been removed:
+ - /etc/trafficserver/vaddrs.config
+ - /etc/trafficserver/metrics.config
+ - /etc/trafficserver/logging.config
+ - /etc/trafficserver/log_hosts.config
+ - /etc/trafficserver/congestion.config
+ - /etc/trafficserver/cluster.config
+ - /etc/trafficserver/body_factory/default/congestion#retryAfter
+
+* New config files have been added and now use yaml format.
+ More files will be migrated in the future:
+ - /etc/trafficserver/logging.yaml
+ - /etc/trafficserver/ssl_server_name.yaml
+
+* gzip pluging has been renamed into compress.
+ Existing configuration won't be updated
+
+* traffic_cop has been removed. Now, init and systemd files use traffic_manager
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Fri, 21 Sep 2018 09:04:07 +0200
+
+* If you are using 32-bits package, please note that upstream has
+ discontinued 32-bit support.
+ 32-bits Debian package will still be built, but is subject to removal
+ whenever 32-bit fails.
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Mon, 14 Dec 2015 10:29:12 +0100
+
+* Please read the CONFIGURATION.Debian file to get started with Traffic Server.
+
+* Currently Apache Traffic Server lacks man pages of binaries shipped along the
+ package. That's a known problem which is being worked on. Please read the
+ upstream documentation on the website instead.
+
+* If you read upstream's documentation about Traffic Server you will sometimes
+ find references to a program `/usr/bin/trafficserver`. Debian does not ship
+ this script. This is intentional. Use Debian's /etc/init.d/trafficserver
+ script instead.
+
+ -- Arno Töll <debian@toell.net> Tue, 31 Dec 2011 13:54:18 +0100
--- /dev/null
+Trafficserver-plugin-conf-remap for Debian
+-----------------------------------------
+
+* The conf_remap plug-in allows you to override configuration directives
+ dependent on actual remapping rules.
+* This plug-in replaces older legacy functionality which allowed to achieve a
+ similar behaviour previously by configuring remap rules for example with
+ switches like "@pristine_host_hdr=1" in your remap configuration.
+* If you want to achieve this behaviour now, configure a remap rule like this:
+
+ map http://cdn.example.com/ http://some-server.example.com \
+ @plugin=conf_remap.so @pparam=/etc/trafficserver/cdn.conf
+
+ where cdn.conf would look like records.config, e.g.
+
+ CONFIG proxy.config.url_remap.pristine_host_hdr INT 1
+
+ Doing this, you will override your global default configuration on a per map-
+ ping rule.
+
+* You may want to look on
+ <https://cwiki.apache.org/confluence/display/TS/conf_remap+Plug-In>
+ for a full list of options which are allowed to be overridden and perhaps
+ some updated information.
+
+ -- Arno Toell <debian@toell.net> Tue, 12 Jan 2011 19:30:18 +0100
--- /dev/null
+#! /usr/bin/perl
+
+use strict;
+
+our @config_lines;
+our %defaults = (
+ "proxy.config.alarm_email" => "trafficserver",
+ "proxy.config.admin.user_id" => "trafficserver",
+ "proxy.config.log.max_space_mb_for_logs" => 2000,
+);
+
+die("Usage: $0 <file name>") unless $#ARGV == 0;
+
+open(F, "+<", $ARGV[0]) || die("Cannot open $ARGV[0]: $!");
+while(my $line = <F>)
+{
+ if ($line =~ /^CONFIG/)
+ {
+ foreach my $pattern (keys %defaults)
+ {
+ $line =~ s/(?<=CONFIG $pattern)(\s+[A-Z]+)\s+.+$/$1 $defaults{$pattern}/;
+ }
+ }
+ push(@config_lines, $line);
+}
+seek(F, 0, 0);
+foreach my $line (@config_lines)
+{
+ print F $line;
+}
+print F "CONFIG proxy.config.admin.user_id STRING trafficserver\n";
+close(F);
--- /dev/null
+trafficserver (8.1.9+ds-1~deb11u1) bullseye-security; urgency=medium
+
+ * New upstream version 8.1.9+ds
+ * Update d/patches for 8.1.9+ds-1~deb11u1 release
+ * Update d/trafficserver-experimental-plugins.install
+ * Multiple CVE fixes for 8.1.x (Closes: #1054427, Closes: #1053801)
+ - CVE-2022-47185: Improper input validation vulnerability
+ - CVE-2023-33934: Improper Input Validation vulnerability
+ - CVE-2023-41752: Exposure of Sensitive Information to an Unauthorized Actor
+ - CVE-2023-44487: The HTTP/2 protocol allows a denial of service
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Thu, 02 Nov 2023 17:00:26 +0100
+
+trafficserver (8.1.7+ds-1~deb11u1) bullseye-security; urgency=high
+
+ * New upstream version 8.1.7+ds
+ * Multiple CVE fixes for 8.1.x (Closes: #1038248)
+ + CVE-2022-47184: Exposure of Sensitive Information to an Unauthorized Actor vulnerability
+ + CVE-2023-30631: Improper Input Validation vulnerability
+ + CVE-2023-33933: Exposure of Sensitive Information to an Unauthorized Actor vulnerability
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Wed, 21 Jun 2023 11:16:56 +0200
+
+trafficserver (8.1.6+ds-1~deb11u1) bullseye-security; urgency=high
+
+ * Update d/u/signing-key for 8.1.x serie
+ * New upstream version 8.1.6+ds
+ * Multiple CVE fixes for 8.1.x
+ + CVE-2022-32749: Improper Check for Unusual or Exceptional Conditions vulnerability
+ + CVE-2022-37392: Improper Check for Unusual or Exceptional Conditions vulnerability
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Wed, 04 Jan 2023 09:22:58 +0100
+
+trafficserver (8.1.5+ds-1~deb11u1) bullseye-security; urgency=high
+
+ * Update d/watch to stick to 8.1.X serie
+ * Update upstream gpg keys
+ * UPdate d/salsa-ci.yaml
+ * New upstream version 8.1.5+ds
+ * Patches refresh for 8.1.5
+ * Update experimental plugins list
+ * Multiple CVE fixes for 8.1.x
+ + CVE-2021-37150: Protocol vs scheme mismatch
+ + CVE-2022-25763: Improper input validation on HTTP/2 headers
+ + CVE-2022-28129: Insufficient Validation of HTTP/1.x Headers
+ + CVE-2022-31778: Transfer-Encoding not treated as hop-by-hop
+ + CVE-2022-31779: Improper HTTP/2 scheme and method validation
+ + CVE-2022-31780: HTTP/2 framing vulnerabilities
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Fri, 12 Aug 2022 09:16:08 +0200
+
+trafficserver (8.1.1+ds-1.1+deb11u1) bullseye-security; urgency=high
+
+ * Multiple CVE fixes for 8.1.x
+ + CVE-2021-37147: Improper input validation vulnerability
+ + CVE-2021-37148: Improper input validation vulnerability
+ + CVE-2021-37149: Improper Input Validation vulnerability
+ + CVE-2021-38161: Improper Authentication vulnerability in TLS origin verification
+ + CVE-2021-44040: Improper Input Validation vulnerability in request line parsing
+ + CVE-2021-44759: Improper Authentication vulnerability in TLS origin validation
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Sat, 21 May 2022 19:28:31 +0200
+
+trafficserver (8.1.1+ds-1.1) unstable; urgency=medium
+
+ * Non-maintainer upload.
+ * Address CVE-2021-27577, CVE-2021-32565, CVE-2021-32566, CVE-2021-32567 and
+ CVE-2021-35474.
+ - CVE-2021-27577: Incorrect handling of url fragment leads to cache
+ poisoning
+ - CVE-2021-32565: HTTP Request Smuggling, content length with invalid
+ charters
+ - CVE-2021-32566: Specific sequence of HTTP/2 frames can cause ATS to
+ crash
+ - CVE-2021-32567: Reading HTTP/2 frames too many times
+ - CVE-2021-35474: Dynamic stack buffer overflow in cachekey plugin
+ (Closes: #990303)
+
+ -- Salvatore Bonaccorso <carnil@debian.org> Thu, 15 Jul 2021 21:48:17 +0200
+
+trafficserver (8.1.1+ds-1) unstable; urgency=medium
+
+ * New upstream version 8.1.0+ds
+ * Update d/watch
+ * Update d/upstream/signing-key.asc
+ * New upstream version 8.1.1+ds
+ * Update Debian Standards-Version
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Sun, 06 Dec 2020 16:26:39 +0100
+
+trafficserver (8.1.1+ds-1) unstable; urgency=medium
+
+ * New upstream version 8.1.0+ds
+ * Update d/watch
+ * Update d/upstream/signing-key.asc
+ * New upstream version 8.1.1+ds
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Sun, 06 Dec 2020 15:43:35 +0100
+
+trafficserver (8.1.0+ds-2) unstable; urgency=medium
+
+ * Remove autopkgtest (Closes: #974683)
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Sun, 22 Nov 2020 18:24:18 +0100
+
+trafficserver (8.1.0+ds-1) unstable; urgency=medium
+
+ * Remove lintian-overrides for trafficserver-experimental-plugins
+ * Fix Salsa CI
+ * Update d/upstream/signing-key.asc
+ * New upstream version 8.1.0+ds
+ * d/patches refresh for 8.1.0
+ * Update experimental plugins list
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Tue, 01 Sep 2020 19:55:21 +0200
+
+trafficserver (8.0.8+ds-3) UNRELEASED; urgency=low
+
+ * Fix day-of-week for changelog entry 2.1.5-unstable-1.
+
+ -- Debian Janitor <janitor@jelmer.uk> Sat, 22 Aug 2020 17:48:33 -0000
+
+trafficserver (8.0.8+ds-2) unstable; urgency=medium
+
+ * Backport upstream patch to fix FTBFS with Sphinx >= 3.0 (Closes: #963664)
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Wed, 29 Jul 2020 08:40:43 +0200
+
+trafficserver (8.0.8+ds-1) unstable; urgency=medium
+
+ * New upstream version 8.0.8+ds
+ * Includes fix for CVE-2020-9494 (Closes: #963629)
+ * Update debhelper-compat version in d/control
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Thu, 25 Jun 2020 10:01:51 +0200
+
+trafficserver (8.0.7+ds-1) unstable; urgency=medium
+
+ * New upstream version 8.0.7+ds
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Thu, 16 Apr 2020 18:32:04 +0200
+
+trafficserver (8.0.6+ds-1) unstable; urgency=medium
+
+ * Update d/watch after upstream changes
+ * Update d/gbp.conf
+ * Update d/gbp.conf
+ * New upstream version 8.0.6+ds
+ * Patches refresh for 8.0.6
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Tue, 03 Mar 2020 09:06:18 +0100
+
+trafficserver (8.0.5+ds-3) unstable; urgency=medium
+
+ * Bump Standards-Version
+ * Add patch for Python 3.8 compatibility (Closes: #950245)
+ * Update build & test dependencies for Python 3.8
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Mon, 03 Feb 2020 11:45:17 +0100
+
+trafficserver (8.0.5+ds-2) unstable; urgency=medium
+
+ * Bump Debian Policy version
+ * Remove Build-Depends against python2 modules (Closes: #943248)
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Wed, 23 Oct 2019 10:07:42 +0200
+
+trafficserver (8.0.5+ds-1) unstable; urgency=medium
+
+ * New upstream release
+ - Changes introduced with 8.0.4 include fixes for CVE-2019-9512,
+ CVE-2019-9514, and CVE-2019-9515. (Closes: #934887)
+ - 8.0.5 fixes CVE-2019-9518 (Closes: #935314)
+
+ -- Emanuele Rocca <ema@debian.org> Sat, 24 Aug 2019 09:00:22 +0200
+
+trafficserver (8.0.3+ds-4) unstable; urgency=medium
+
+ * Fix lintian warning 'skip-systemd-native-flag-missing-pre-depends'
+ * Use debhelper-compat instead of debian/compat
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Fri, 02 Aug 2019 09:07:31 +0200
+
+trafficserver (8.0.3+ds-3) unstable; urgency=medium
+
+ * Run upstream testsuite with autopkgtest.
+ * Enable CI tests on salsa (see debian/salsa-ci.yml).
+ * Set debhelper compatibility level to 12.
+ * Add myself to the Uploaders field.
+ * Set Standards-Version to 4.4.0.
+
+ -- Emanuele Rocca <ema@debian.org> Wed, 31 Jul 2019 11:11:59 +0200
+
+trafficserver (8.0.3+ds-2) unstable; urgency=medium
+
+ * Fix hardeing updating 0015-as-needed-fix.patch from Ubuntu
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Tue, 26 Mar 2019 08:44:17 +0100
+
+trafficserver (8.0.3+ds-1) unstable; urgency=medium
+
+ * Use secure URI in Homepage field.
+ * Re-export upstream signing key without extra signatures.
+ * Drop unnecessary dependency on dh-autoconf.
+ * New upstream version 8.0.3+ds
+ * Patches update for 8.0.3
+ * Add as-needed patch from Ubuntu
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Mon, 25 Mar 2019 10:29:35 +0100
+
+trafficserver (8.0.2+ds-1) unstable; urgency=medium
+
+ * Disable testing build in d/gitlab-ci.yml
+ * Update d/copyright to remove unneeded files when importing upstream release
+ * Update upstream GPG keys list
+ * New upstream version 8.0.2+ds
+ * Patches refresh for 8.0.2
+ * Update patch. Add dep3 headers
+ * Update d/control. Mark trafficserver-dev architecture all
+ * Remove signature from upstream keys. Fix lintian info
+ * Move dpkg-maintscript-helper commands to d/trafficserver.maintscript
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Wed, 30 Jan 2019 14:45:09 +0100
+
+trafficserver (8.0.1-4) unstable; urgency=medium
+
+ * Add patch and update d/control, d/rules to use system provided yaml-cpp
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Fri, 11 Jan 2019 19:07:28 +0100
+
+trafficserver (8.0.1-3) unstable; urgency=medium
+
+ * Add missed experimental plugin certifier
+ * Add man pages paths to d/not-installed to avoid too verbose dh_missing list.
+ Manpages are compressed before being install. Non-compressed version is in
+ turn erroneously detected as not installed.
+ * Update patch which has been merged upstream
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Mon, 07 Jan 2019 15:24:38 +0100
+
+trafficserver (8.0.1-2) unstable; urgency=medium
+
+ * Update Standards Version in d/control. No other changes needed
+ * Update trafficserver-experimental-plugins package descriptions
+ in d/control to fix lintian warnings
+ * Add patch 0012-fix-spelling-checks to fix spellings. Forwarded upstream
+ * Update patch 0006-fix-doc-build to include missing manpages
+ * Remove d/trafficserver.lintian-overrides
+ * Add patch 0013-fix-perl-interpreter-path. Fix lintian error which used
+ to be overridden in d/trafficserver.lintian-overrides
+ * Update d/trafficserver-dev.lintian-overrides
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Thu, 03 Jan 2019 10:52:44 +0100
+
+trafficserver (8.0.1-1) unstable; urgency=medium
+
+ * New upstream version 8.0.1
+ * Patches refresh for 8.0.1
+ * Removed patches which have been merged upstream:
+ - 0002-add-mips64-support
+ - 0004-fix_arm_build
+ - 0005-fix_build_kfreebsd
+ - 0007-fix-uri_signing
+ - 0010-fix-32bits-build
+ - 0012-fix-traffic_via
+ * Fix lintian warning public-upstream-key-not-minimal
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Mon, 03 Dec 2018 14:15:07 +0100
+
+trafficserver (8.0.0-4) unstable; urgency=medium
+
+ [ Emanuele Rocca ]
+ * Update descriptions in d/control
+
+ [ Jean Baptiste Favre ]
+ * Update patch to fix kfreebsd FTBFS
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Mon, 05 Nov 2018 10:13:03 +0100
+
+trafficserver (8.0.0-3) unstable; urgency=medium
+
+ * Remove webptransform experimental plugin
+ * Update patch to fix kfreebsd FTBFS
+ * Update d/copyright to fix lintian error
+ * Update d/rules to fix FTBFS for mips & mipsel archs
+ * Update d/rules to spare call to dpkg-parsechangelog
+ * Update d/copyright after 8.0.0 file moves
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Fri, 02 Nov 2018 14:24:38 +0100
+
+trafficserver (8.0.0-2) unstable; urgency=medium
+
+ * Add a patch to fix FTBFS with MySQL 8 (LP: #1795362)
+ * Update 0009-fix-mysql-8-build.patch which has been merged upstream
+ * Bump Standards-Version in d/control
+ * Add patch to fix 32bits arm & mips arch build
+ * Backport upstream patch to fix segmentation fault
+ * Backport upstream patch to fix traffic_via
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Wed, 17 Oct 2018 20:40:51 +0200
+
+trafficserver (8.0.0-1) unstable; urgency=medium
+
+ [ Aron Xu ]
+ * Remove .vscode directory
+ * systemd: After=network-online.target
+
+ [ Jean Baptiste Favre ]
+ * Update d/changelog for 8.0.0
+ * Update init and service file after traffic_cop removal
+ * Update d/README.Debian to reflect configuration changes
+ * Add d/gitlab-ci.yml to use Salsa CI
+ * Update d/control
+ * Add build-deps against graphviz, python3-sphinxcontrib.plantuml
+ and plantuml to build documentation & manpages
+ * Add build-deps against libcrypto++-dev, libjansson-dev, libcjose-dev to
+ build uri_signing plugin
+ * Update Breaks to manage plugins transition from experimental to stable
+ * Update postinst maintainer script, add postrm & preinst scripts to remove
+ obsolete config files
+ - /etc/trafficserver/vaddrs.config,
+ - /etc/trafficserver/metrics.config,
+ - /etc/trafficserver/logging.config,
+ - /etc/trafficserver/log_hosts.config,
+ - /etc/trafficserver/congestion.config,
+ - /etc/trafficserver/cluster.config,
+ - /etc/trafficserver/body_factory/default/congestion#retryAfter
+ * Update d/trafficserver and d/trafficserver-experimental-plugins install
+ files
+ - Stable plugin gzip renamed to compress
+ - Promoted stable plugins:
+ - cachekey,
+ - cache_promote,
+ - escalate,
+ - test_cppapi,
+ - tslua
+ - Added new experimental plugins:
+ - access_control,
+ - fq_pacing,
+ - prefetch,
+ - server_push_preload,
+ - system_stats,
+ - tls_bridge,
+ - traffic_dump,
+ - uri_signing
+ - Remove deprecated plugins collapsed_connection, epic
+ * Remove obsolete config option --enable-system-luajit from d/rules
+ * Add --with-build-version option to d/rule to have a deterministic
+ build-version
+ * Update d/copyright to remove .vscode during import at repack stage
+ * Update patches for 8.0.0
+ - Refresh patches for 8.0.0
+ - Removed patches:
+ - 0004-force-use-luajit-system*, updated upstream
+ - 0005-fix_documentation_build_option, updated upstream
+ - 0008-fix_build_lua, updated upstream
+ - 0009-fix-doc-python3, update upstream
+ - 0010-Remove-custom-memory-barriers-from-header_rewrite-an patches,
+ updated upstream
+ - Renamed remaining patches:
+ - 0006-fix_arm_build -> 0004-fix_arm_build,
+ - 0007-fix_build_kfreebsd -> 0005-fix_build_kfreebsd,
+ - 0009-fix-doc-git -> 0006-fix-doc-build
+ - Add patch to fix uri_signing experimental plugin build
+ - Add patch to fix check-unused-dependencies
+ * New upstream version 8.0.0
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Sat, 06 Oct 2018 12:43:13 +0200
+
+trafficserver (7.1.4+ds-1) unstable; urgency=medium
+
+ [ Aron Xu ]
+ * Use libunwind for mips*
+
+ [ Jean Baptiste Favre ]
+ * Update Debian standards version
+ * New upstream version 7.1.4+ds
+ * Patches refresh for 7.1.4
+ * Add lintian override for trafficserver package
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Mon, 06 Aug 2018 10:56:14 +0200
+
+trafficserver (7.1.3+ds-4) unstable; urgency=medium
+
+ * Fix FTBS on armel (Closes: #902112)
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Fri, 22 Jun 2018 17:13:53 +0200
+
+trafficserver (7.1.3+ds-3) unstable; urgency=medium
+
+ * Add systemd tmpfile support (LP: #1756207)
+ * Update Build-Depends (Closes: #887503)
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Wed, 13 Jun 2018 22:39:58 +0200
+
+trafficserver (7.1.3+ds-2) unstable; urgency=medium
+
+ * Update build-deps to libncurses6
+ * Update patch to fix arm* builds
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Fri, 18 May 2018 17:25:22 +0200
+
+trafficserver (7.1.3+ds-1) unstable; urgency=medium
+
+ * Update Vcs URLs. Replace alioth with salsa
+ * Add patch to make documentation build with python3. Fix lintian warning
+ * New upstream version 7.1.3+ds
+ * Update d/gbp.conf
+ * Patches refresh for 7.1.3
+ * Add a patch to fix doc build outside of git repository
+ * Update standards version
+ * Remove chown command from postinst script. Fix lintian warning
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Tue, 24 Apr 2018 10:17:21 +0200
+
+trafficserver (7.1.2+ds-3) unstable; urgency=medium
+
+ * Add upstream changelog file to trafficserver package
+ * Add systemd units file
+ * Fix documentation. Update links
+ * Update d/rules to remove examples binary files from package
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Fri, 16 Feb 2018 15:05:07 +0100
+
+trafficserver (7.1.2+ds-2) unstable; urgency=medium
+
+ * Drop patch for lua source code removal (Handled with repack)
+ * Drop patch for documentation build (merged upstream)
+ * Add a patch to make man pages being built
+ * Update d/compat
+ * Fix lintian warnings
+ * Update d/rule to fix lintian warning.
+ * Disable auto_test (again)
+ * Install CHANGELOG file in /usr/share/doc
+ * Enable documentation built (if not, man pages aren't either)
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Thu, 25 Jan 2018 23:38:51 +0100
+
+trafficserver (7.1.2+ds-1) unstable; urgency=medium
+
+ * New upstream version 7.1.2+ds
+ * Update d/patches for 7.1.2+ds
+ * Update build dependencies
+ * Update compilation flags
+ * Enable experimental plugin cache_key_genid
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Tue, 16 Jan 2018 18:18:40 +0100
+
+trafficserver (7.1.1-1) unstable; urgency=medium
+
+ * Fix trafficserver-dev dependencies. (Closes: #877457)
+ * Fix d/gbp.conf. Remove duplicate filter option
+ * Update standards version in d/control
+ * Fix debian-rules-sets-dpkg-architecture-variable lintian warning
+ * Fix debian-watch-uses-insecure-uri lintian info
+ * Update d/patches
+ * Update d/rules to reflect healthcheck being managed as a stable plugin
+ * Add a patch to fix kfreebsd build
+ * Add a patch to fix arm build
+ * New upstream version 7.1.0
+ * Remove broken 0008-fix_build_armel patch
+ * Patches refresh for 7.1.0
+ * Add new patch to fix build with luajit 2.1 (Closes: #873328)
+ * Update experimental modules list
+ * Update Debian Standards-Version & d/compat
+ * Update Vcs-* fields to use secure communication
+ * Lintian fix for d/NEWS
+ * Add new build option to use system luajit
+ * Update build dependencies (Closes: #859750)
+ * Fix lintian warning in d/copyright
+ * New upstream version 7.1.1
+ * Patches refresh for 7.1.1
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Tue, 02 Jan 2018 13:30:43 +0100
+
+trafficserver (7.0.0-5) unstable; urgency=medium
+
+ * Add patch to fix arm* build. (Closes: #857389)
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Wed, 22 Mar 2017 09:31:14 +0100
+
+trafficserver (7.0.0-4) unstable; urgency=medium
+
+ * Add Conflicts for file overwrites (Closes: #850775)
+
+ -- Aron Xu <aron@debian.org> Wed, 11 Jan 2017 14:49:15 +0800
+
+trafficserver (7.0.0-3) unstable; urgency=medium
+
+ * Fix documentation build for docutils >= 0.13 (Closes: #848800)
+ * Update LuaJIT patches serie to fallback using Lua if LuaJIT not found
+ * Update luajit patch.
+ - Remove hardcoded value
+ - Add luajit dynamic detection
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Wed, 04 Jan 2017 15:13:43 +0100
+
+trafficserver (7.0.0-2) unstable; urgency=medium
+
+ * Add patches to use system luajit and not the internal one any more
+ * Update d/rules to remove luajit exception.
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Fri, 25 Nov 2016 17:51:25 +0100
+
+trafficserver (7.0.0-1) unstable; urgency=medium
+
+ [ Arno Töll ]
+ * Remove myself as maintainer. Thanks to Aron and Jean Baptiste for stepping
+ in on my place and keeping the package up to date. It makes the confident
+ the package is in good hands now.
+
+ [ Jean Baptiste Favre ]
+ * New upstream release 7.0.0
+ * Patches refresh for 7.0.0
+ * Update plugins list
+ * Update build dependencies
+ * Add pkgconfig .pc file in trafficserver-dev package
+ * Enable experimental plugins webp_transform
+ * Enable traffic_top build (Closes: #836126)
+ * Remove Linux AIO support (Closes: #803661, #836124)
+ * Fix FTBFS for mips64el (Closes: #830856)
+ * Add patch to make the build reproductible (Closes: #833176)
+
+ [ Aron Xu ]
+ * Set myself as Maintainer at the moment
+ * Build-Depends on default-libmysqlclient-dev
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Wed, 16 Nov 2016 09:48:10 +0100
+
+trafficserver (6.2.0-1) unstable; urgency=medium
+
+ * Add upstream gpg keys for uscan pgpsigurlmangle option
+ * Imported Upstream version 6.2.0
+ * Patch refresh for 6.2.0
+ * Update trafficserver manpages list
+ * Update trafficserver install list
+ * Update trafficserver-experimental-plugins install list
+ * Update build dependencies (Add libmariadbclient-dev in experimental)
+ * Bump standards version
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Sat, 23 Jul 2016 19:15:58 +0200
+
+trafficserver (6.1.1-1) unstable; urgency=medium
+
+ * Imported Upstream version 6.1.1
+ * Update d/watch for gpg signature check
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Sat, 06 Feb 2016 10:37:41 +0100
+
+trafficserver (6.1.0-1) unstable; urgency=medium
+
+ * New upstream release
+ * Use -mcx16 on x86 platforms only (Closes: #805124)
+
+ -- Aron Xu <aron@debian.org> Tue, 02 Feb 2016 12:18:10 +0800
+
+trafficserver (6.0.0-3) unstable; urgency=medium
+
+ * Update d/NEWS & d/README.Debian with 32-bit upstream support drop
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Mon, 14 Dec 2015 10:48:20 +0100
+
+trafficserver (6.0.0-2) unstable; urgency=medium
+
+ * Re-enable 32-bit builds
+ * Add some optional build dependencies
+ * Use -O3 by default
+
+ -- Aron Xu <aron@debian.org> Sat, 31 Oct 2015 03:05:20 +0800
+
+trafficserver (6.0.0-1) unstable; urgency=medium
+
+ [ Aron Xu ]
+ * Avoid possible-missing-colon-in-closes
+
+ [ Jean Baptiste Favre ]
+ * Imported Upstream version 6.0.0
+ * Update experimental plugins list
+ - Remove channel_stats
+ - Add cache promote cache_promote.so
+ - Add cache ranage request cache_range_requests.so
+ - Add mp4 streaming media mp4.so
+ - Add Stream editor stream_editor.so
+
+ -- Aron Xu <aron@debian.org> Sat, 10 Oct 2015 11:19:19 +0200
+
+trafficserver (5.3.1-1) unstable; urgency=medium
+
+ [ Arno Töll ]
+ * Add proxy.config.admin.user_id setting
+
+ [ Aron Xu ]
+ * Add myself back to Uploaders
+ * Use dh compat 9
+
+ [ Jean Baptiste Favre ]
+ * Imported Upstream version 5.3.1
+ * Removed patch for TS-3632 (merged upstream)
+ * Upstream changes allow ftbfs with GCC-5 (Closes: #778148)
+
+ -- Jean Baptiste Favre <debian@jbfavre.org> Sat, 04 Jul 2015 23:20:49 +0200
+
+trafficserver (5.3.0-2) unstable; urgency=medium
+
+ * Avoid installing tslua.so on archs built without LuaJIT
+ (Closes: #770353)
+
+ -- Aron Xu <aron@debian.org> Thu, 11 Jun 2015 15:28:39 +0800
+
+trafficserver (5.3.0-1) unstable; urgency=medium
+
+ * Imported Upstream version 5.3.0
+ - CVE-2014-10022: remote DoS
+ * Remove fix_TS3316_i386_build patch
+ * Fix traffic_wccp build, missing OpenSSL symbol
+ * Add experimental plugin generator
+ * Format patch for TS-3632
+ * Update Uploader field in d/control
+
+ -- Jean Baptiste Favre <jbfavre@debian.org> Wed, 03 Jun 2015 20:06:13 +0200
+
+trafficserver (5.2.0-2) unstable; urgency=medium
+
+ * Disable LuaJIT for arm64
+
+ -- Aron Xu <aron@debian.org> Sat, 28 Feb 2015 23:51:00 +0800
+
+trafficserver (5.2.0-1) unstable; urgency=medium
+
+ [ Jean Baptiste Favre ]
+ * New upstream release.
+ * Add support for following experimental modules:
+ - epic
+ - header_normalize
+ - mysql_remap
+ - ssl_cert_loader
+ - sslheaders
+ * Remove missing file related to removed traffic_shell
+ * Backport patch for TS-3316 to solve i386 build issue
+ * Fix misconfigured call to dh_makeshlibs (used system dir instead
+ of temporary build one)
+
+ [ Aron Xu ]
+ * Enable all hardening features.
+ * Update copyright file.
+
+ -- Aron Xu <aron@debian.org> Thu, 12 Feb 2015 22:22:44 +0100
+
+trafficserver (5.1.1-1) unstable; urgency=medium
+
+ * New upstream release. This release includes fixes for these security
+ related vulnerabilities:
+ - CVE-2014-3566: Do not enable SSL3 by default
+ - CVE-2014-3624: Ensure remap requests are properly tunneled using CONNECT
+ requests to avoid an open relay
+ * Add support for ppc64el, patch merged upstream (Closes: #754134, #754808)
+ * Fix "ftbfs on kfreebsd" by conditionally building healthchecks.so on Linux
+ only. Patch supplied by Steven Chamberlain, thanks (Closes: #767287)
+
+ -- Arno Töll <arno@debian.org> Sun, 02 Nov 2014 12:40:44 -1100
+
+trafficserver (5.1.0-1) unstable; urgency=medium
+
+ * New upstream release
+ * Bump standards version to 3.9.6 (no changes needed)
+
+ [Jean Baptiste Favre]
+ * Add a debug package with debug symbols for those who need it.
+ * Split out experimental trafficserver plugins into a separate package so
+ that users are aware of their experimental character before using them.
+ * Add a libhwloc b-d so that ATS has a better idea about the underlying
+ hardware it runs at to improve the runtime performance
+
+ -- Arno Töll <arno@debian.org> Wed, 08 Oct 2014 23:50:49 -1100
+
+trafficserver (5.0.1-1) unstable; urgency=medium
+
+ * New upstream release including a fix for CVE-2014-3525 that allowed
+ attackers by special crafted packets to obtain privileges for services bound
+ to localhost
+
+ -- Arno Töll <arno@debian.org> Wed, 23 Jul 2014 04:43:00 -1100
+
+trafficserver (5.0.0-1) unstable; urgency=medium
+
+ * Acknowledge previous NMUs, thanks to Anibal Monsalve Salazar for
+ coordination.
+ * New upstream version. Patch changes:
+ + drop 0001-TS-1821.patch: released upstream in 5.0.0
+ + drop 0001-TS-2454-Fix-undefined-reference-to-__sync_fetch_and_.patch:
+ released upstream in 4.2
+ + drop add-mips-support.patch: released upstream in 5.0.0
+ + drop pthread_setname_np.patch: This was a Debian specific issue which is
+ being worked around in eglibc's commit r5460.
+ * Add "support for mips64": merged upstream (Closes: #750807)
+ * Build with dh-autoreconf to avoid build time issues with Automake 1.13
+ which is not in Debian yet.
+
+ -- Arno Töll <arno@debian.org> Sun, 06 Jul 2014 00:20:59 -1100
+
+trafficserver (4.1.2-1.2) unstable; urgency=medium
+
+ * Non-maintainer upload.
+ * Add missing prototype for pthread_setname_np()
+ Add pthread_setname_np.patch
+ Patch by Petr Salinger
+ Closes: #743584
+
+ -- Anibal Monsalve Salazar <anibal@debian.org> Fri, 04 Apr 2014 08:59:48 +0100
+
+trafficserver (4.1.2-1.1) unstable; urgency=medium
+
+ * Non-maintainer upload.
+ * Fix undefined reference to `__sync_fetch_and_sub_8' on ARM 32bit
+ Add 0001-TS-2454-Fix-undefined-reference-to-__sync_fetch_and_.patch
+ from https://issues.apache.org/jira/browse/TS-2454
+ Patch by Yunkai Zhang
+ * Add support for MIPS
+ Add add-mips-support.patch
+ Submitted: https://issues.apache.org/jira/browse/TS-2687
+ Merged: https://git-wip-us.apache.org/repos/asf?p=trafficserver.git;h=2f81790
+ Patch by Dejan Latinovic
+ Closes: 743395
+ * Build-depend on libboost-dev
+ Patch by Dejan Latinovic
+ Closes: #737510
+
+ -- Anibal Monsalve Salazar <anibal@debian.org> Thu, 03 Apr 2014 04:18:23 +0100
+
+trafficserver (4.1.2-1) unstable; urgency=medium
+
+ * Merge the experimental branch of trafficserver to unstable
+ * New upstram release (Closes: #711530, #733377)
+ + Refresh 0001-TS-1821.patch until it is fixed upstream
+ + Don't run autoreconf anymore, we do not need it anymore
+ + build depend on libaio-dev to support AIO on Linux systems
+ * Push standards version
+
+ -- Arno Töll <arno@debian.org> Wed, 29 Jan 2014 03:01:12 -1100
+
+trafficserver (3.3.2-1) experimental; urgency=low
+
+ [ Arno Töll ]
+ * Drop --with-arg-max from configure
+ * Update changelog in view of the new upstream version
+
+ [ Aron Xu ]
+ * Imported Upstream version 3.3.2
+ * Drop patch for enabling experimental plugins
+ * Add liblua5.1-dev and liboost1.53-dev to B-D
+ * Try on all archs for experimental builds
+ * Permit parallel building
+ * Fix typo in dep5 copyright file
+ * Do not install staticly linked library
+ * Enable Linux native AIO support for linux-any
+ * Enable reclaimable freelist
+
+ -- Aron Xu <aron@debian.org> Thu, 09 May 2013 01:00:04 +0800
+
+trafficserver (3.3.0+git20121208-0exp1) experimental; urgency=low
+
+ * Upstream git snapshot.
+ * Enable most of experimental plugins, install related libraries.
+ * Run dh_autoreconf.
+ * Make dh_auto_test errors non-fatal.
+
+ -- Aron Xu <aron@debian.org> Thu, 06 Dec 2012 23:32:25 +0800
+
+trafficserver (3.3.0-1) experimental; urgency=low
+
+ * Upload upstream development release to experimental.
+
+ -- Aron Xu <aron@debian.org> Thu, 29 Nov 2012 22:13:55 +0800
+
+trafficserver (3.2.5-1) unstable; urgency=low
+
+ * New upstream release
+ + Fix FTBFS on ARM (Closes: #691179)
+ + Fix FTBS with gcc 4.8 (Closes: #701427)
+ * Promote trafficserver to depend for trafficserver-dev to fix a broken
+ library symlink. The library is not required for all users, but those who
+ need it don't need to install it manually anymore (Closes: #715134)
+
+ -- Arno Töll <arno@debian.org> Sun, 21 Jul 2013 11:55:38 +0200
+
+trafficserver (3.2.4-1) unstable; urgency=low
+
+ * New upstream release
+ + Delete upstream's .gitignore file in our source tree
+ * Switch packaging repository to Git.
+ + Add gbp.conf file for those using git-buildpackage
+ * Fix "Upgrade fails if purging of cache fails" by not dying in a fire when
+ the postinst fails to purge the cache (Closes: #687698)
+ * Drop --with-arg-max from ./configure, it's not needed anymore.
+
+ -- Arno Töll <arno@debian.org> Tue, 29 Jan 2013 23:54:44 +0100
+
+trafficserver (3.2.0-1) unstable; urgency=low
+
+ * New upstream release
+ + If you are using SSL or HTTP filtering, please update your configuration.
+ proxy.config.http.quick_filter.mask and
+ proxy.config.ssl.server.cert.filename is not recognized anymore. Please
+ use ip_allow.config and ssl_multicert.config respectively instead.
+ There is no automated migration for this in Debian, as this affects your
+ site-specific configuration files.
+ + See https://cwiki.apache.org/confluence/display/TS/Upgrading+to+3.2 for
+ full upgrade instructions.
+ * Upstream decided to ship more plug-ins with the trafficserver core
+ distribution. These are all bundled into the main package now. Therefore,
+ the trafficserver-plugin-conf-remap package is not provided anymore.
+ * Update the default configuration file to ship with more moderate values
+ for the log configuration.
+ * Now do start ATS by default for fresh installations. The default
+ out-of-the box configuration is much more secure than past defaults.
+ * Purge the host and data cache on upgrades
+ * Let's welcome Aron Xu to the Uploaders of Trafficserver. Hi Aron! :)
+
+ -- Arno Töll <arno@debian.org> Fri, 14 Sep 2012 22:56:29 +0200
+
+trafficserver (3.0.5-1) unstable; urgency=low
+
+ * New upstream release.
+ * No kudos for the previous hostile NMU, but include the changelog to denote
+ this upload does not introduce a regression.
+ * Update my maintainer address
+ * Make the init script look much better when using fancy outputs.
+ * Fix "status" output of the init script
+ * Remove "DM-Upload-Allowed". I don't need that flag anymore.
+
+
+ -- Arno Töll <arno@debian.org> Sat, 09 Jun 2012 18:48:23 +0200
+
+trafficserver (3.0.4-1.1) unstable; urgency=low
+
+ * Non maintainer upload
+ * Fix build failure with GCC 4.7. Closes: #667396.
+
+ -- Matthias Klose <doko@debian.org> Wed, 30 May 2012 04:40:28 +0000
+
+trafficserver (3.0.4-1) unstable; urgency=high
+
+ * New upstream release
+ + Fix CVE-2012-0256: A request with a very large Host header caused ATS to
+ crash.
+ * Setting urgency to high because of security updates
+ * Push standards to 3.9.3 - no further changes
+ * Stilistic adaptions in debian/copyright, but not content changes
+ * Remove cluster interface warning from README.Configuration. ATS now binds on
+ lo by default
+
+ -- Arno Töll <debian@toell.net> Wed, 21 Mar 2012 12:34:35 +0100
+
+trafficserver (3.0.2-1) unstable; urgency=low
+
+ * New upstream release
+ + Includes former Debian specific patch which makes sure the upstream
+ configure script does not override any -O flags passed by the user
+ anymore.
+ * Adapt to dpkg 1.16.1 API changes regarding build flags. This enables
+ hardening build flags. This means, trafficserver is now being built with
+ -fstack-protector and other security related build flags.
+ * Add dpkg-dev (>= 1.16.1~) to build-depends to make sure our buildflags are
+ properly supported. That's guaranteed for Testing, but might be helpful to
+ know for backporters.
+ * Fix several issues in the DEP-5 syntax. Unfortunately there is no way to
+ express that a file is subject to different license agreements so far.
+ * Do not install the upstream changelog twice anymore
+ * Finally run regression checks again, now as build failures are sorted out.
+
+ -- Arno Töll <debian@toell.net> Sun, 11 Dec 2011 00:45:45 +0100
+
+trafficserver (3.0.1-2) unstable; urgency=low
+
+ * Fix "please add armhf to the arch list" - add armhf to the list of supported
+ architectures. Thanks Konstantinos Margaritis for the hint (Closes: #636338)
+ * Remove IA64 from the list of supported architectures. The upgrade to the gcc
+ 4.6 toolchain disclosed portability issues with it, which caused the resul-
+ ting binary package to produce no-op code in some functions.
+
+ -- Arno Töll <debian@toell.net> Tue, 02 Aug 2011 22:58:37 +0200
+
+trafficserver (3.0.1-1) unstable; urgency=low
+
+ * New upstream release. Fixes several important issues which caused
+ `traffic_cop' and `traffic_server' to crash.
+ * Fix "FTBFS with ld --as-needed" re-order libraries upon linkage, patch
+ committed upstream. Thanks Ilya Barygin (Closes: #632546)
+ * Fix "trafficserver: Getting rid of unneeded *.la / emptying
+ dependency_libs", remove *.la files from the installation target completely
+ (Closes: #633192)
+ * Set "DM-Upload-Allowed: yes" in agreement with Asheesh Laroia
+ <paulproteus{at}debian.org>
+
+ -- Arno Töll <debian@toell.net> Mon, 01 Aug 2011 19:29:58 +0200
+
+trafficserver (3.0.0-1) unstable; urgency=low
+
+ * New upstream release. Major changes (since 2.1.9):
+ + `traffic_server' won't crash anymore when using non-existent plugin in
+ remap rule
+ + Don't cache HTTP 401, 303 and 407 error responses anymore, when negative
+ caching is enabled.
+ * Re-enable kfreebsd support, it was accidentally not available in
+ 2.1.9-unstable-1 because of non installable dependencies, as libcap-dev is
+ installable (and required) on Linux only
+ * debian/rules:
+ + Simplify dh_auto_configure flags (upstream incorporated our build layout)
+ + Enable WCCP (Web Cache Communication Protocol; Linux only)
+ * debian/control:
+ + Add flex and bison to build dependencies, both are required for WCCP
+ (Linux only)
+
+ -- Arno Töll <debian@toell.net> Wed, 15 Jun 2011 15:56:29 +0200
+
+trafficserver (2.1.9-unstable-1) unstable; urgency=low
+
+ * New upstream release. Major features (since 2.1.8):
+ + Bring back support for $DESTDIR and "make check" which makes Debian
+ patches obsolete
+ + Allow larger working sets than 512G
+ + Disable cluster autodiscovery when cluster mode is disabled
+ + Cleanup `records.config'
+ + Disable SSLv2 by default
+ * debian/control: Add build dependency to libcap-dev, because when running
+ traffic_server standalone, it is unable to bind restricted ports otherwise
+ (Upstream: TS-804)
+ * debian/rules:
+ + Remove override for dh_clean, but put options to debian/source/options
+ instead
+ + Remove DH_OPTIONS (unused anyway)
+ * Source package: Minor change to improving package quality and usability
+ (i.e. grammar, verbosity of comments)
+ * Make the init script more robust
+ * Base the origin of the package source on the untouched upstream tarball,
+ instead of the versioned SVN branch.
+ * Bring back IA64 support, this time actually working (upstream merged my
+ patch TS-783)
+ * Remove patch `build-quirks.patch'. Changes have been committed upstream
+ by now.
+
+ -- Arno Töll <debian@toell.net> Tue, 31 May 2011 21:56:12 +0200
+
+trafficserver (2.1.8-unstable-1) unstable; urgency=low
+
+ * New upstream release. Major features (since 2.1.5):
+ + Many bug fixes (none reported in Debian's BTS)
+ + Set source address for origin Servers
+ + Major API changes for the SDK
+ + Provide traffic_logstats
+ + traffic_shell does not hang anymore on any command
+ * Fix "FTBFS on architectures not supported upstream": (Closes: #622800)
+ + Don't execute regression checks for now (fixes x86)
+ + Upstream merges a Debian patch originally for 2.1.7 which enables
+ kFreeBSD support (originally provided by myself)
+ + Restrict Architectures (drop S390, IA64, MIPS[EL], PPC, SPARC)
+ * Remove ts-ui-disable-conf.patch (applied upstream)
+ * Update `build-quirks.patch' to make TS handle $DESTDIR correctly
+ (upstream: TS-759)
+ * Remove .deps from SDK binary package examples (they were incidentally
+ included before).
+ * Fix permissions for /var/cache/trafficserver in postinst
+ * Bump standards to 3.9.2, depend on debhelper 8.0, adapt VCS links
+ * Simplify debian/rules
+
+ -- Arno Töll <debian@toell.net> Thu, 05 May 2011 21:49:52 +0200
+
+trafficserver (2.1.5-unstable-1) unstable; urgency=low
+
+ * Initial release (Closes: #609285)
+ * Added some configuration and informational hints
+ * New upstream release. Major features:
+ + Better AMD64 support
+ + Override configuration per transaction
+ + IPv6
+ + Support ARM architectures
+ + SDK-API changes
+ * Differences to upstream version:
+ + Ship some documentation. Well, really a few hints
+ + Split source into three packages (core, plug-in, SDK)
+ + Ship our own init script
+
+ -- Arno Toell <debian@toell.net> Thu, 13 Jan 2011 11:49:18 +0100
--- /dev/null
+Source: trafficserver
+Section: web
+Priority: optional
+Maintainer: Jean Baptiste Favre <debian@jbfavre.org>
+Uploaders: Aron Xu <aron@debian.org>, Emanuele Rocca <ema@debian.org>
+Build-Depends: debhelper-compat (= 13), libssl-dev, tcl-dev, libexpat1-dev,
+ libpcre3-dev, libtool, libcap-dev [linux-any], graphviz,
+ bison [linux-any], flex [linux-any], dpkg-dev (>= 1.16.1~), pkg-config, libgeoip-dev,
+ libluajit-5.1-dev, libboost-dev, libhwloc-dev, default-libmysqlclient-dev,
+ python3-distro, python3-sphinx, plantuml, python3-sphinxcontrib.plantuml,
+ libxml2-dev, libncurses-dev, libcurl4-openssl-dev,
+ libkyotocabinet-dev, libmemcached-dev, libbrotli-dev,
+ libcrypto++-dev, libjansson-dev, libcjose-dev, libyaml-cpp-dev (>= 0.6.2~),
+ libunwind-dev [i386 amd64 ppc64el armhf arm64 mipsel mips64el mips]
+Standards-Version: 4.5.1
+Homepage: https://trafficserver.apache.org/
+Vcs-Git: https://salsa.debian.org/debian/trafficserver.git
+Vcs-Browser: https://salsa.debian.org/debian/trafficserver
+
+Package: trafficserver
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, lsb-base (>= 3.2-14), adduser,
+ ${perl:Depends}
+Pre-Depends: ${misc:Pre-Depends}
+Provides: trafficserver-plugin-conf-remap
+Replaces: trafficserver-plugin-conf-remap (<< 3.2~),
+ trafficserver-experimental-plugins (<< 8.0.0~)
+Suggests: trafficserver-experimental-plugins (= ${binary:Version})
+Breaks: trafficserver-plugin-conf-remap (<< 3.2~),
+ trafficserver-experimental-plugins (<< 8.0.0~)
+Description: fast, scalable and extensible HTTP/1.1 and HTTP/2.0 caching proxy server
+ This package provides the Apache Traffic Server, a fast, scalable reverse
+ proxy server which may operate as forward proxy as well. Apache Traffic Server
+ supports:
+ .
+ * Caching: improve response time while reducing server load and bandwidth
+ needs by caching and reusing frequently-requested web pages, images, and
+ web service calls.
+ * Proxying: add keep-alive, filter or anonymize content requests, or add
+ load balancing by adding a proxy layer.
+ * Scaling: handle 10s of thousands of requests per second on modern SMP
+ hardware.
+ * Extensions: use the API to do anything from modifying HTTP headers to
+ handling ESI requests to writing your own cache algorithm.
+
+Package: trafficserver-experimental-plugins
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Pre-Depends: trafficserver (= ${binary:Version})
+Breaks: trafficserver (<< 8.0.0~)
+Description: experimental plugins for Apache Traffic Server
+ This package provides the Apache Traffic Server plugins marked as
+ experimental.
+ .
+ Please note that these plugins can be removed without priori notice, or
+ promoted as stable plugin. In the last case, they'll be moved from
+ trafficserver-experimental-plugins to trafficserver package.
+
+Package: trafficserver-dev
+Architecture: any
+Depends: ${misc:Depends}, trafficserver (= ${binary:Version})
+Description: Apache Traffic Server Software Developers Kit (SDK)
+ This package provides the Apache Traffic Server Software Developers Kit, which
+ consists of: a collection of development header and bindings for the C
+ programming language, the tsxs linking helper and examples to write your own
+ plug-ins for the Apache Traffic Server.
--- /dev/null
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: Traffic Server
+Upstream-Contact: dev@trafficserver.apache.org
+Source: http://trafficserver.apache.org/
+Files-Excluded:
+ .vscode
+ lib/yamlcpp
+Comment:
+ The upstream repository provides libraries which are also available
+ in Debian. Because we'll use libraries packaged in Debian, we don't
+ need embedded ones.
+
+Files: *
+Copyright: 2010 - 2011 The Apache Software Foundation
+ 2009 Yahoo! Inc.
+License: Apache-2.0
+
+Files: debian/*
+Copyright: 2011 Arno Töll
+License: Apache-2.0
+Comment: Packaging for Debian was done by Arno Toell, and I hereby grant
+ distribution of it under the same terms as Apache Traffic Server itself.
+
+License: Apache-2.0
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+ .
+ http://www.apache.org/licenses/LICENSE-2.0
+ .
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+ .
+ On Debian systems, the full text of the e Apache License, Version 2.0
+ can be found in the file `/usr/share/common-licenses/Apache-2.0'.
+
+Files: include/tscore/ink_rand.*
+Copyright: 1997 - 2002, Makoto Matsumoto and Takuji Nishimura
+License: BSD-3-clause
+
+Files: include/tscore/ink_resolver.h src/tscore/ink_res_init.cc src/tscore/ink_res_mkquery.cc
+Copyright: 1983, 1987, 1989 The Regents of the University of California
+License: BSD-3-clause
+
+License: BSD-3-clause
+ For the University of California part:
+ .
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the University nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+ .
+ THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+ .
+ For the Internet Systems Consortium, Inc. part:
+ See Apache-2.0
+ .
+ For the Digital Equipment Corporation part:
+ Permission to use, copy, modify, and distribute this software for any
+ purpose with or without fee is hereby granted, provided that the above
+ copyright notice and this permission notice appear in all copies, and that
+ the name of Digital Equipment Corporation not be used in advertising or
+ publicity pertaining to distribution of the document or software without
+ specific, written prior permission.
+ .
+ THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
+ WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
+ OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL DIGITAL EQUIPMENT
+ CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+ ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ SOFTWARE.
+
+Files: src/tscore/ink_string.cc
+Comment: For the strlcat, strlcpy in inktomi++/ink_string.cc
+Copyright: 1998 Todd C. Miller <Todd.Miller@courtesan.com>
+License: ISC
+ Permission to use, copy, modify, and distribute this software for any
+ purpose with or without fee is hereby granted, provided that the above
+ copyright notice and this permission notice appear in all copies.
+ .
+ THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+Files: include/tscore/fastlz.h src/tscore/fastlz.c
+Copyright: 2005-2007 Ariya Hidayat (ariya@kde.org)
+License: Expat
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+ .
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+ .
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.
--- /dev/null
+LAYOUT
+NOTICE
+STATUS
+REVIEWERS
+README
+README-EC2
+debian/README.Debian
+debian/CONFIGURATION.Debian
+debian/README.conf-remap.Debian
--- /dev/null
+[DEFAULT]
+pristine-tar = True
+builder=dpkg-buildpackage -i\.git -I.git
+#cleaner=true
+
+[import-orig]
+filter = [
+ '.gitignore',
+ '.git',
+ '.vscode',
+ '.clang-analyzer',
+ '.clang-format',
+ '.clang-tidy',
+ '.editorconfig',
+ 'emacs-style',
+ '.vimrc',
+ 'Vagrantfile' ]
+merge = True
--- /dev/null
+usr/man/man3
+usr/share/man
--- /dev/null
+Description: make the build reproducible
+Author: Reiner Herrmann <reiner@reiner-h.de>
+Origin: other, https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=833176
+Reviewed-by: Jean Baptiste Favre <debian@jbfavre.org>
+Last-Update: 2016-11-18
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/configure.ac
++++ b/configure.ac
+@@ -144,9 +144,9 @@ AC_ARG_WITH([build-number],
+ #
+ # Build environment
+ #
+-build_person="`id -nu | sed -e 's/\\\\/\\\\\\\\/g'`"
+-build_group="`id -ng | sed -e 's/\\\\/\\\\\\\\/g'`"
+-build_machine="`uname -n | sed -e 's/\\\\/\\\\\\\\/g'`"
++build_person="root"
++build_group="root"
++build_machine="localhost"
+ AC_SUBST([build_machine])
+ AC_SUBST([build_person])
+ AC_SUBST([build_group])
--- /dev/null
+Description: Make documentation build works outside of git repository
+ Current documentation build requires git and curl to get some stuff from the internet
+ This patch aims to delete those dependencies, forcing git branch to master,
+ and using Debian provided plantuml instead of downloading it from apache mirror
+Author: Jean Baptiste Favre <debian@jbfavre.org>
+Origin: other
+Last-Update: 2019-01-03
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/doc/ext/traffic-server.py
++++ b/doc/ext/traffic-server.py
+@@ -380,7 +380,7 @@ with open('../configure.ac', 'r') as f:
+ autoconf_version = '.'.join(match.group(1).split('.', 2)[:2] + ['x'])
+
+ # get the current branch the local repository is on
+-git_branch = subprocess.check_output(['git', 'rev-parse', '--abbrev-ref', 'HEAD'])
++git_branch = "master"
+
+
+ def make_github_link(name, rawtext, text, lineno, inliner, options={}, content=[]):
+--- a/doc/Makefile.am
++++ b/doc/Makefile.am
+@@ -61,7 +61,7 @@ I18NSPHINXOPTS = $(SPHINXOPTS)
+ # The PAPER setting variables requires recursive make variable expansion, which automake
+ # detects as non-portable. We bounce this through a shell script and do the expansion there.
+ SBUILD = PAPEROPT_a4="$(PAPEROPT_a4)" PAPEROPT_letter="$(PAPEROPT_letter)" PAPER="$(PAPER)" \
+- PLANTUML_JAR="$(shell ext/plantuml_fetch.sh | tail -1)" \
++ PLANTUML_JAR="/usr/share/plantuml/plantuml.jar" \
+ $(srcdir)/sbuild $(SPHINXBUILD) \
+ -c $(srcdir) \
+ $(ALLSPHINXOPTS)
+--- a/doc/uml/Makefile.am
++++ b/doc/uml/Makefile.am
+@@ -18,7 +18,7 @@
+
+ if BUILD_DOCS
+ images := $(patsubst %.uml,images/%.svg,$(wildcard *.uml))
+-PLANTUML_JAR := $(shell ../ext/plantuml_fetch.sh | tail -1)
++PLANTUML_JAR := /usr/share/plantuml/plantuml.jar
+
+ all-am: jar-check $(images)
+ endif
+@@ -39,7 +39,7 @@ latex: all-am
+ man: all-am
+
+ images/%.svg : %.uml
+- $(JAVA) -jar $(PLANTUML_JAR) -o images -tsvg $<
++ $(JAVA) -jar $(PLANTUML_JAR) -graphvizdot /usr/bin/dot -o images -tsvg $<
+
+ clean-local:
+ rm -f images/*.svg
--- /dev/null
+Description: Force python3 usage, add libfakeroot-sysv to blacklist
+Author: Jean Baptiste Favre <debian@jbfavre.org>
+Origin: other
+Last-Update: 2018-09-24
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/tools/check-unused-dependencies
++++ b/tools/check-unused-dependencies
+@@ -54,7 +54,8 @@ def get_dependencies(program):
+ 'libgcc_s.so.',
+ 'libm.so.', # Why does Libtool call ld with -lm?
+ 'libpthread.so.', # Because we add -lpthread to LIBS
+- 'librt.so.' # clang + asan pulls this in
++ 'librt.so.', # clang + asan pulls this in
++ 'libfakeroot-sysv.so'
+ ])):
+ continue
+
--- /dev/null
+Description: Fix build issue with MySQL 8
+ The my_bool type is no longer used in MySQL source code.
+ Any third-party code that used this type to represent C
+ boolean variables should use the bool or int C type instead.
+Author: Jean Baptiste Favre <debian@jbfavre.org>
+Origin: other, https://bugs.launchpad.net/ubuntu/+source/trafficserver/+bug/1795362
+Forwarded: https://github.com/apache/trafficserver/pull/4360
+Applied-Upstream: https://github.com/apache/trafficserver/commit/05b30527974416768515506f69da338652c23260
+Reviewed-by: Jean Baptiste Favre <debian@jbfavre.org>
+Last-Update: 2018-10-06
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/plugins/experimental/mysql_remap/mysql_remap.cc
++++ b/plugins/experimental/mysql_remap/mysql_remap.cc
+@@ -187,7 +187,7 @@ TSPluginInit(int argc, const char *argv[
+ my_data *data = (my_data *)malloc(1 * sizeof(my_data));
+
+ TSPluginRegistrationInfo info;
+- my_bool reconnect = 1;
++ bool reconnect = 1;
+
+ info.plugin_name = const_cast<char *>(PLUGIN_NAME);
+ info.vendor_name = const_cast<char *>("Apache Software Foundation");
--- /dev/null
+Description: Fix Segmentation fault in ShowCache::handleCacheEvent
+Author: zhang <15535135608@163.com>
+Origin: upstream
+Bug: https://github.com/apache/trafficserver/issues/4328
+Applied-Upstream: https://github.com/apache/trafficserver/commit/616eb10bfc35599a2c93ff30879d584a05ddf83e
+Reviewed-by: Jean Baptiste Favre <debian@jbfavre.org>
+Last-Update: 2018-10-17
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/iocore/cache/CachePages.cc
++++ b/iocore/cache/CachePages.cc
+@@ -337,6 +337,13 @@ ShowCache::handleCacheEvent(int event, E
+ CacheHTTPInfoVector *vec = &(cache_vc->vector);
+ int alt_count = vec->count();
+ if (alt_count) {
++ // check cache_vc->first_buf is NULL, response cache lookup busy.
++ if (cache_vc->first_buf == nullptr) {
++ cache_vc->do_io_close(-1);
++ CHECK_SHOW(show("<H3>Cache Lookup Busy, please try again</H3>\n"));
++ return complete(event, e);
++ }
++
+ Doc *d = (Doc *)(cache_vc->first_buf->data());
+ time_t t;
+ char tmpstr[4096];
--- /dev/null
+Description: Fix various speeling issues
+Author: Jean Baptiste Favre <debian@jbfavre.org>
+Forwarded: https://github.com/apache/trafficserver/pull/4750
+Applied-Upstream: https://github.com/apache/trafficserver/commit/af0ad4a1880a21743e98331855bb78e15d5406ef
+Last-Update: 2019-01-03
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/doc/admin-guide/files/ip_allow.config.en.rst
++++ b/doc/admin-guide/files/ip_allow.config.en.rst
+@@ -55,7 +55,7 @@ range with the lower and upper values eq
+ The value of ``method`` is a string which must consist of either HTTP method names separated by the
+ character '|' or the keyword literal ``ALL``. This keyword may omitted in which case it is treated
+ as if it were ``method=ALL``. Methods can also be specified by having multiple instances of the
+-``method`` keyword, each specifiying a single method. E.g., ``method=GET|HEAD`` is the same as
++``method`` keyword, each specifying a single method. E.g., ``method=GET|HEAD`` is the same as
+ ``method=GET method=HEAD``. The method names are not validated which means non-standard method names
+ can be specified.
+
+@@ -104,7 +104,7 @@ If the entire subnet were to be denied,
+
+ src_ip=123.45.6.0/24 action=ip_deny
+
+-The following example allows to any upstream servers::
++The following example allows one to any upstream servers::
+
+ dest_ip=0.0.0.0-255.255.255.255 action=ip_allow
+
+--- a/doc/admin-guide/files/parent.config.en.rst
++++ b/doc/admin-guide/files/parent.config.en.rst
+@@ -210,7 +210,7 @@ The following list shows the possible ac
+ - ``simple_retry`` - If the parent origin server returns a 404 response on a request
+ a new parent is selected and the request is retried. The number of retries is controlled
+ by ``max_simple_retries`` which is set to 1 by default.
+- - ``unavailable_server_retry`` - If the parent returns a 503 response or if the reponse matches
++ - ``unavailable_server_retry`` - If the parent returns a 503 response or if the response matches
+ a list of http 5xx responses defined in ``unavailable_server_retry_responses``, the currently selected
+ parent is marked down and a new parent is selected to retry the request. The number of
+ retries is controlled by ``max_unavailable_server_retries`` which is set to 1 by default.
+@@ -228,7 +228,7 @@ The following list shows the possible ac
+
+ ``max_simple_retries``
+ By default the value for ``max_simple_retries`` is 1. It may be set to any value in the range 1 to 5.
+- If ``parent_retry`` is set to ``simple_retry`` or ``both`` a 404 reponse
++ If ``parent_retry`` is set to ``simple_retry`` or ``both`` a 404 response
+ from a parent origin server will cause the request to be retried using a new parent at most 1 to 5
+ times as configured by ``max_simple_retries``.
+
+@@ -236,7 +236,7 @@ The following list shows the possible ac
+
+ ``max_unavailable_server_retries``
+ By default the value for ``max_unavailable_server_retries`` is 1. It may be set to any value in the range 1 to 5.
+- If ``parent_retry`` is set to ``unavailable_server_retries`` or ``both`` a 503 reponse
++ If ``parent_retry`` is set to ``unavailable_server_retries`` or ``both`` a 503 response
+ by default or any http 5xx response listed in the list ``unavailable_server_retry_responses`` from a parent origin server will
+ cause the request to be retried using a new parent after first marking the current parent down. The request
+ will be retried at most 1 to 5 times as configured by ``max_unavailable_server_retries``.
+--- a/doc/admin-guide/files/records.config.en.rst
++++ b/doc/admin-guide/files/records.config.en.rst
+@@ -833,7 +833,7 @@ mptcp
+ ===== ======================================================================
+ Value Description
+ ===== ======================================================================
+- ``0`` |TS| will buffer the request until the post body has been recieved and
++ ``0`` |TS| will buffer the request until the post body has been received and
+ then send the request to the origin server.
+ ``1`` Immediately return a ``100 Continue`` from |TS| without waiting for
+ the post body.
+@@ -1653,7 +1653,7 @@ Proxy User Variables
+ connection=full Full user agent connection :ref:`protocol tags <protocol_tags>`
+ ================== ===============================================================
+
+- Each paramater in the list must be separated by ``|`` or ``:``. For example, ``for|by=uuid|proto`` is
++ Each parameter in the list must be separated by ``|`` or ``:``. For example, ``for|by=uuid|proto`` is
+ a valid value for this variable. Note that the ``connection`` parameter is a non-standard extension to
+ RFC 7239. Also note that, while Traffic Server allows multiple ``by`` parameters for the same proxy, this
+ is prohibited by RFC 7239. Currently, for the ``host`` parameter to provide the original host from the
+@@ -1681,7 +1681,7 @@ Proxy User Variables
+ information.
+ See :ts:cv:`proxy.config.http.server_ports` for information on how to enable Proxy Protocol on a port.
+
+- See :ref:`proxy-protocol` for more discussion on how |TS| tranforms the `Forwarded: header.
++ See :ref:`proxy-protocol` for more discussion on how |TS| transforms the `Forwarded: header.
+
+ .. ts:cv:: CONFIG proxy.config.http.normalize_ae INT 1
+ :reloadable:
+@@ -2387,7 +2387,7 @@ DNS
+
+ .. ts:cv:: CONFIG proxy.config.dns.resolv_conf STRING /etc/resolv.conf
+
+- Allows to specify which ``resolv.conf`` file to use for finding resolvers. While the format of this file must be the same as the
++ Allows one to specify which ``resolv.conf`` file to use for finding resolvers. While the format of this file must be the same as the
+ standard ``resolv.conf`` file, this option allows an administrator to manage the set of resolvers in an external configuration file,
+ without affecting how the rest of the operating system uses DNS.
+
+@@ -2654,7 +2654,7 @@ HostDB
+ Set the frequency (in seconds) to sync hostdb to disk.
+
+ Note: hostdb is syncd to disk on a per-partition basis (of which there are 64).
+- This means that the minumum time to sync all data to disk is :ts:cv:`proxy.config.cache.hostdb.sync_frequency` * 64
++ This means that the minimum time to sync all data to disk is :ts:cv:`proxy.config.cache.hostdb.sync_frequency` * 64
+
+ Logging Configuration
+ =====================
+@@ -2988,7 +2988,7 @@ Diagnostic Logging Configuration
+
+ .. ts:cv:: CONFIG proxy.config.diags.debug.tags STRING http|dns
+
+- Each |TS| `diag` and `debug` level message is annotated with a subsytem tag. This configuration
++ Each |TS| `diag` and `debug` level message is annotated with a subsystem tag. This configuration
+ contains an anchored regular expression that filters the messages based on the tag. The
+ expressions are prefix matched which creates an implicit ``.*`` at the end. Therefore the default
+ value ``http|dns`` will match tags such as ``http``, ``http_hdrs``, ``dns``, and ``dns_recv``.
+@@ -2996,7 +2996,7 @@ Diagnostic Logging Configuration
+ Some commonly used debug tags are:
+
+ ============ =====================================================
+- Tag Subsytem usage
++ Tag Subsystem usage
+ ============ =====================================================
+ dns DNS query resolution
+ http_hdrs Logs the headers for HTTP requests and responses
+@@ -3152,7 +3152,7 @@ SSL Termination
+ .. ts:cv:: CONFIG proxy.config.ssl.client.groups_list STRING <See notes under proxy.config.ssl.server.groups_list.>
+
+ Configures the list of supported groups provided by OpenSSL which
+- |TS| will use for the "key_share" and "supported groups" extention
++ |TS| will use for the "key_share" and "supported groups" extension
+ of TLSv1.3 connections. The value is a colon separated list of
+ group NIDs or names, for example "P-521:P-384:P-256". For
+ instructions, see "Groups" section of `TLS1.3 - OpenSSLWiki <https://wiki.openssl.org/index.php/TLS1.3#Groups>`_.
+@@ -3295,7 +3295,7 @@ SSL Termination
+ ``0`` Disables the session cache entirely.
+ ``1`` Enables the session cache using OpenSSL's implementation.
+ ``2`` Default. Enables the session cache using |TS|'s implementation. This
+- implentation should perform much better than the OpenSSL
++ implementation should perform much better than the OpenSSL
+ implementation.
+ ===== ======================================================================
+
+--- a/doc/admin-guide/files/remap.config.en.rst
++++ b/doc/admin-guide/files/remap.config.en.rst
+@@ -415,7 +415,7 @@ Acl Filters
+
+ Acl filters can be created to control access of specific remap lines. The markup
+ is very similar to that of :file:`ip_allow.config`, with slight changes to
+-accomodate remap markup
++accommodate remap markup
+
+ Examples
+ --------
+--- a/doc/admin-guide/files/storage.config.en.rst
++++ b/doc/admin-guide/files/storage.config.en.rst
+@@ -92,7 +92,7 @@ which will effectively clear most of the
+ reboot causes the path names to change.
+
+ The :arg:`id` option can be used to create a fixed string that an administrator can use to keep the
+-assignment table consistent by maintaing the mapping from physical device to base string even in the presence of hardware changes and failures.
++assignment table consistent by maintaining the mapping from physical device to base string even in the presence of hardware changes and failures.
+
+ Examples
+ ========
+--- a/doc/appendices/command-line/traffic_ctl.en.rst
++++ b/doc/appendices/command-line/traffic_ctl.en.rst
+@@ -255,7 +255,7 @@ traffic_ctl host
+ .. program:: traffic_ctl host
+ .. option:: status HOSTNAME [HOSTNAME ...]
+
+- Get the current status of the hosts used in parent.config as a next hop in a multi-tiered cache heirarchy. The value 0 or 1 is returned indicating that the host is marked as down '0' or marked as up '1'. If a host is marked as down, it will not be used as the next hop parent, another host marked as up will be chosen.
++ Get the current status of the hosts used in parent.config as a next hop in a multi-tiered cache hierarchy. The value 0 or 1 is returned indicating that the host is marked as down '0' or marked as up '1'. If a host is marked as down, it will not be used as the next hop parent, another host marked as up will be chosen.
+
+ .. program:: traffic_ctl host
+ .. option:: down --time seconds --reason 'active|local|manual' HOSTNAME [HOSTNAME ...]
+--- a/doc/developer-guide/api/functions/TSCacheRemove.en.rst
++++ b/doc/developer-guide/api/functions/TSCacheRemove.en.rst
+@@ -41,4 +41,4 @@ the cache calls :arg:`contp` back with t
+ In both of these callbacks, the user (:arg:`contp`) does not have to do
+ anything. The user does not get any vconnection from the cache, since
+ no data needs to be transferred. When the cache calls :arg:`contp` back with
+-:data:`TS_EVENT_CACHE_REMOVE`, the remove has already been commited.
++:data:`TS_EVENT_CACHE_REMOVE`, the remove has already been committed.
+--- a/doc/developer-guide/api/functions/TSContSchedule.en.rst
++++ b/doc/developer-guide/api/functions/TSContSchedule.en.rst
+@@ -32,7 +32,7 @@ Description
+ ===========
+
+ Schedules :arg:`contp` to run :arg:`delay` milliseconds in the future. This is approximate. The delay
+-will be at least :arg:`delay` but possibly more. Resultions finer than roughly 5 milliseconds will
++will be at least :arg:`delay` but possibly more. Resolutions finer than roughly 5 milliseconds will
+ not be effective. :arg:`contp` is required to have a mutex, which is provided to
+ :func:`TSContCreate`.
+
+--- a/doc/developer-guide/api/functions/TSHttpConnectWithPluginId.en.rst
++++ b/doc/developer-guide/api/functions/TSHttpConnectWithPluginId.en.rst
+@@ -79,7 +79,7 @@ virtual connection.
+
+ The combination of :arg:`tag` and :arg:`id` is intended to enable correlation
+ in log post processing. The :arg:`tag` identifies the connection as related
+-to the plugin and the :arg:`id` can be used in conjuction with plugin
++to the plugin and the :arg:`id` can be used in conjunction with plugin
+ generated logs to correlate the log records.
+
+ Notes
+--- a/doc/developer-guide/api/functions/TSHttpOverridableConfig.en.rst
++++ b/doc/developer-guide/api/functions/TSHttpOverridableConfig.en.rst
+@@ -43,7 +43,7 @@ Description
+
+ Some of the values that are set in :file:`records.config` can be changed for a
+ specific transaction. It is important to note that these functions change the
+-configuration values stored for the transation, which is not quite the same as
++configuration values stored for the transaction, which is not quite the same as
+ changing the actual operating values of the transaction. The critical effect is
+ the value must be changed before it is used by the transaction - after that,
+ changes will not have any effect.
+--- a/doc/developer-guide/api/functions/TSHttpTxnErrorBodySet.en.rst
++++ b/doc/developer-guide/api/functions/TSHttpTxnErrorBodySet.en.rst
+@@ -36,4 +36,4 @@ Description
+ Note that both string arguments must be allocated with :c:func:`TSmalloc` or
+ :c:func:`TSstrdup`. The :arg:`mimetype` is optional, and if not provided it
+ defaults to :literal:`text/html`. Sending an empty string would prevent setting
+-a content type header (but that is not adviced).
++a content type header (but that is not advised).
+--- a/doc/developer-guide/api/functions/TSHttpTxnMilestoneGet.en.rst
++++ b/doc/developer-guide/api/functions/TSHttpTxnMilestoneGet.en.rst
+@@ -138,7 +138,7 @@ is successful.
+
+ .. macro:: TS_MILESTONE_LAST_ENTRY
+
+- A psuedo index which is set to be one more than the last valid index. This is useful for looping over the data.
++ A pseudo index which is set to be one more than the last valid index. This is useful for looping over the data.
+
+
+ * The server connect times predate the transmission of the :literal:`SYN`
+--- a/doc/developer-guide/api/functions/TSHttpTxnServerIntercept.en.rst
++++ b/doc/developer-guide/api/functions/TSHttpTxnServerIntercept.en.rst
+@@ -53,7 +53,7 @@ The response from the plugin is cached s
+ caching rules. Should the plugin wish the response not be cached, the plugin
+ must use appropriate HTTP response headers to prevent caching. The primary
+ purpose of :func:`TSHttpTxnServerIntercept` is allow plugins to provide gateways
+-to other protocols or to allow to plugin to its own transport for the next hop
++to other protocols or to allow one to plugin to its own transport for the next hop
+ to the server. :func:`TSHttpTxnServerIntercept` overrides parent cache
+ configuration.
+
+--- a/doc/developer-guide/api/functions/TSIOBufferReader.en.rst
++++ b/doc/developer-guide/api/functions/TSIOBufferReader.en.rst
+@@ -59,7 +59,7 @@ has two very important consequences --
+ * Conversely keeping a reader around unused will pin the buffer data in memory. This can be useful or harmful.
+
+ A buffer has a fixed amount of possible readers (currently 5) which is determined at compile
+-time. Reader allocation is fast and cheap until this maxium is reached at which point it fails.
++time. Reader allocation is fast and cheap until this maximum is reached at which point it fails.
+
+ :func:`TSIOBufferReaderAlloc` allocates a reader for the IO buffer :arg:`bufp`. This should only be
+ called on a newly allocated buffer. If not the location of the reader in the buffer will be
+--- a/doc/developer-guide/api/functions/TSSslContext.en.rst
++++ b/doc/developer-guide/api/functions/TSSslContext.en.rst
+@@ -36,11 +36,11 @@ Description
+ ===========
+
+ :func:`TSSslContextFindByName` searches for a SSL server context
+-created from :file:`ssl_multicert.config`, matching against the
++created from :file:`ssl_multicert.config`, matchingg against the
+ server :arg:`name`.
+
+ :func:`TSSslContextFindByAddr` searches for a SSL server context
+-created from :file:`ssl_multicert.config` matchin against the server
++created from :file:`ssl_multicert.config` matching against the server
+ :arg:`address`.
+
+
+--- a/doc/developer-guide/api/functions/TSSslSession.en.rst
++++ b/doc/developer-guide/api/functions/TSSslSession.en.rst
+@@ -46,7 +46,7 @@ The functions also work with the :type:`
+
+ These functions perform the appropriate locking on the session cache to avoid errors.
+
+-The :func:`TSSslSessionGet` and :func:`TSSslSessionGetBuffer` functions retreive the :type:`TSSslSession` object that is identifed by the
++The :func:`TSSslSessionGet` and :func:`TSSslSessionGetBuffer` functions retrieve the :type:`TSSslSession` object that is identifed by the
+ :type:`TSSslSessionID` object. If there is no matching sesion object, :func:`TSSslSessionGet` returns NULL and :func:`TSSslSessionGetBuffer`
+ returns 0.
+
+--- a/doc/developer-guide/api/functions/TSStat.en.rst
++++ b/doc/developer-guide/api/functions/TSStat.en.rst
+@@ -46,9 +46,9 @@ Description
+
+ A plugin statistic is created by :func:`TSStatCreate`. The :arg:`name` must be globally unique and
+ should follow the standard dotted tag form. To avoid collisions and for easy of use the first tag
+-should be the plugin name or something easily derived from it. Currently only integers are suppored
++should be the plugin name or something easily derived from it. Currently only integers are supported
+ therefore :arg:`type` must be :macro:`TS_RECORDDATATYPE_INT`. The return value is the index of the
+-statistic. In general thsi should work but if it doesn't it will :code:`assert`. In particular,
++statistic. In general this should work but if it doesn't it will :code:`assert`. In particular,
+ creating the same statistic twice will fail in this way, which can happen if statistics are created
+ as part of or based on configuration files and |TS| is reloaded.
+
+--- a/doc/developer-guide/api/functions/TSVConnReenable.en.rst
++++ b/doc/developer-guide/api/functions/TSVConnReenable.en.rst
+@@ -32,7 +32,7 @@ Description
+ ===========
+
+ Reenable the SSL connection :arg:`svc`. If a plugin hook is called, ATS
+-processing on that connnection will not resume until this is invoked for that
++processing on that connection will not resume until this is invoked for that
+ connection.
+
+ If the server is running OpenSSL 1.0.1 with the appropraite patch installed or
+--- a/doc/developer-guide/api/functions/TSfwrite.en.rst
++++ b/doc/developer-guide/api/functions/TSfwrite.en.rst
+@@ -44,4 +44,4 @@ The behavior is undefined if length is g
+ Return Value
+ ============
+
+-Returns the number of bytes actually written, or -1 if an error occured.
++Returns the number of bytes actually written, or -1 if an error occurred.
+--- a/iocore/cache/CacheHosting.cc
++++ b/iocore/cache/CacheHosting.cc
+@@ -715,7 +715,7 @@ ConfigVolumes::BuildListFromString(char
+ // added by YTS Team, yamsat for bug id 59632
+ total += size;
+ if (size > 100 || total > 100) {
+- err = "Total volume size added upto more than 100 percent, No volumes created";
++ err = "Total volume size added up to more than 100 percent, No volumes created";
+ break;
+ }
+ // ends here
+--- a/iocore/eventsystem/IOBuffer.cc
++++ b/iocore/eventsystem/IOBuffer.cc
+@@ -182,7 +182,7 @@ MIOBuffer::puts(char *s, int64_t len)
+ }
+ if (!*pb || *pb == '\n') {
+ int64_t n = (int64_t)(pb - s);
+- memcpy(end(), s, n + 1); // Upto and including '\n'
++ memcpy(end(), s, n + 1); // Up to and including '\n'
+ end()[n + 1] = 0;
+ fill(n + 1);
+ return n + 1;
+--- a/plugins/esi/lib/EsiProcessor.cc
++++ b/plugins/esi/lib/EsiProcessor.cc
+@@ -305,7 +305,7 @@ EsiProcessor::process(const char *&data,
+
+ /* FAILURE CACHE */
+ FailureData *data = static_cast<FailureData *>(pthread_getspecific(threadKey));
+- _debugLog("plugin_esi_failureInfo", "[%s]Fetched data related to thread specfic %p", __FUNCTION__, data);
++ _debugLog("plugin_esi_failureInfo", "[%s]Fetched data related to thread specific %p", __FUNCTION__, data);
+
+ for (iter = try_iter->attempt_nodes.begin(); iter != try_iter->attempt_nodes.end(); ++iter) {
+ if ((iter->type == DocNode::TYPE_INCLUDE) || iter->type == DocNode::TYPE_SPECIAL_INCLUDE) {
+@@ -342,7 +342,7 @@ EsiProcessor::process(const char *&data,
+ }
+ }
+ if (attempt_succeeded) {
+- _debugLog(_debug_tag, "[%s] attempt section succeded; using attempt section", __FUNCTION__);
++ _debugLog(_debug_tag, "[%s] attempt section succeeded; using attempt section", __FUNCTION__);
+ _node_list.splice(try_iter->pos, try_iter->attempt_nodes);
+ } else {
+ _debugLog(_debug_tag, "[%s] attempt section errored; trying except section", __FUNCTION__);
+@@ -436,7 +436,7 @@ EsiProcessor::flush(string &data, int &o
+
+ /* FAILURE CACHE */
+ FailureData *fdata = static_cast<FailureData *>(pthread_getspecific(threadKey));
+- _debugLog("plugin_esi_failureInfo", "[%s]Fetched data related to thread specfic %p", __FUNCTION__, fdata);
++ _debugLog("plugin_esi_failureInfo", "[%s]Fetched data related to thread specific %p", __FUNCTION__, fdata);
+
+ for (iter = try_iter->attempt_nodes.begin(); iter != try_iter->attempt_nodes.end(); ++iter) {
+ if ((iter->type == DocNode::TYPE_INCLUDE) || iter->type == DocNode::TYPE_SPECIAL_INCLUDE) {
+@@ -473,7 +473,7 @@ EsiProcessor::flush(string &data, int &o
+ }
+ }
+ if (attempt_succeeded) {
+- _debugLog(_debug_tag, "[%s] attempt section succeded; using attempt section", __FUNCTION__);
++ _debugLog(_debug_tag, "[%s] attempt section succeeded; using attempt section", __FUNCTION__);
+ _n_prescanned_nodes = _n_prescanned_nodes + try_iter->attempt_nodes.size();
+ _node_list.splice(try_iter->pos, try_iter->attempt_nodes);
+ } else {
+--- a/plugins/esi/lib/Variables.cc
++++ b/plugins/esi/lib/Variables.cc
+@@ -437,18 +437,18 @@ Variables::_parseDictVariable(const std:
+ for (int i = 0; i < (var_size - 1); ++i) {
+ if (variable[i] == '{') {
+ if (paranth_index != -1) {
+- _debugLog(_debug_tag, "[%s] Cannot have multiple paranthesis in dict variable [%.*s]", __FUNCTION__, var_size, var_ptr);
++ _debugLog(_debug_tag, "[%s] Cannot have multiple parenthesis in dict variable [%.*s]", __FUNCTION__, var_size, var_ptr);
+ return false;
+ }
+ paranth_index = i;
+ }
+ if (variable[i] == '}') {
+- _debugLog(_debug_tag, "[%s] Cannot have multiple paranthesis in dict variable [%.*s]", __FUNCTION__, var_size, var_ptr);
++ _debugLog(_debug_tag, "[%s] Cannot have multiple parenthesis in dict variable [%.*s]", __FUNCTION__, var_size, var_ptr);
+ return false;
+ }
+ }
+ if (paranth_index == -1) {
+- _debugLog(_debug_tag, "[%s] Could not find opening paranthesis in variable [%.*s]", __FUNCTION__, var_size, var_ptr);
++ _debugLog(_debug_tag, "[%s] Could not find opening parenthesis in variable [%.*s]", __FUNCTION__, var_size, var_ptr);
+ return false;
+ }
+ if (paranth_index == 0) {
+--- a/plugins/experimental/collapsed_forwarding/collapsed_forwarding.cc
++++ b/plugins/experimental/collapsed_forwarding/collapsed_forwarding.cc
+@@ -353,7 +353,7 @@ TSRemapInit(TSRemapInterface * /* api_in
+ TSError("Cannot initialize %s as both global and remap plugin", DEBUG_TAG);
+ return TS_ERROR;
+ } else {
+- TSDebug(DEBUG_TAG, "plugin is succesfully initialized for remap");
++ TSDebug(DEBUG_TAG, "plugin is successfully initialized for remap");
+ return TS_SUCCESS;
+ }
+ }
+--- a/plugins/experimental/fq_pacing/fq_pacing.c
++++ b/plugins/experimental/fq_pacing/fq_pacing.c
+@@ -118,7 +118,7 @@ TSRemapInit(TSRemapInterface *api_info,
+ return TS_ERROR;
+ }
+
+- TSDebug(PLUGIN_NAME, "plugin is succesfully initialized");
++ TSDebug(PLUGIN_NAME, "plugin is successfully initialized");
+ return TS_SUCCESS;
+ }
+
+--- a/plugins/experimental/header_normalize/header_normalize.cc
++++ b/plugins/experimental/header_normalize/header_normalize.cc
+@@ -158,7 +158,7 @@ TSRemapInit(TSRemapInterface *api_info,
+ return TS_ERROR;
+ }
+ buildHdrMap();
+- TSDebug(PLUGIN_NAME, "plugin is succesfully initialized");
++ TSDebug(PLUGIN_NAME, "plugin is successfully initialized");
+ return TS_SUCCESS;
+ }
+
+--- a/plugins/experimental/prefetch/plugin.cc
++++ b/plugins/experimental/prefetch/plugin.cc
+@@ -202,7 +202,7 @@ evaluate(const String &v)
+ } else {
+ stmt.assign(v);
+ }
+- PrefetchDebug("statement: '%s', formating length: %zu", stmt.c_str(), len);
++ PrefetchDebug("statement: '%s', formatting length: %zu", stmt.c_str(), len);
+
+ int result = 0;
+ pos = stmt.find_first_of("+-");
+--- a/plugins/experimental/url_sig/url_sig.c
++++ b/plugins/experimental/url_sig/url_sig.c
+@@ -98,7 +98,7 @@ TSRemapInit(TSRemapInterface *api_info,
+ return TS_ERROR;
+ }
+
+- TSDebug(PLUGIN_NAME, "plugin is succesfully initialized");
++ TSDebug(PLUGIN_NAME, "plugin is successfully initialized");
+ return TS_SUCCESS;
+ }
+
+--- a/plugins/generator/generator.cc
++++ b/plugins/generator/generator.cc
+@@ -609,7 +609,7 @@ GeneratorTxnHook(TSCont contp, TSEvent e
+ TSReleaseAssert(TSHttpTxnCacheLookupStatusGet(arg.txn, &status) == TS_SUCCESS);
+ if (status != TS_CACHE_LOOKUP_HIT_FRESH) {
+ // This transaction is going to be a cache miss, so intercept it.
+- VDEBUG("intercepting orgin server request for txn=%p", arg.txn);
++ VDEBUG("intercepting origin server request for txn=%p", arg.txn);
+ TSHttpTxnServerIntercept(TSContCreate(GeneratorInterceptionHook, TSMutexCreate()), arg.txn);
+ }
+
+--- a/plugins/header_rewrite/header_rewrite.cc
++++ b/plugins/header_rewrite/header_rewrite.cc
+@@ -345,7 +345,7 @@ TSPluginInit(int argc, const char *argv[
+ // just appended to the configurations.
+ TSDebug(PLUGIN_NAME, "Loading global configuration file %s", argv[i]);
+ if (conf->parse_config(argv[i], TS_HTTP_READ_RESPONSE_HDR_HOOK)) {
+- TSDebug(PLUGIN_NAME, "Succesfully loaded global config file %s", argv[i]);
++ TSDebug(PLUGIN_NAME, "Successfully loaded global config file %s", argv[i]);
+ got_config = true;
+ } else {
+ TSError("[header_rewrite] failed to parse configuration file %s", argv[i]);
+@@ -416,7 +416,7 @@ TSRemapNewInstance(int argc, char *argv[
+ delete conf;
+ return TS_ERROR;
+ } else {
+- TSDebug(PLUGIN_NAME, "Succesfully loaded remap config file %s", argv[i]);
++ TSDebug(PLUGIN_NAME, "Successfully loaded remap config file %s", argv[i]);
+ }
+ }
+
+--- a/plugins/s3_auth/s3_auth.cc
++++ b/plugins/s3_auth/s3_auth.cc
+@@ -869,7 +869,7 @@ event_handler(TSCont cont, TSEvent event
+ }
+
+ if (TS_HTTP_STATUS_OK == status) {
+- TSDebug(PLUGIN_NAME, "Succesfully signed the AWS S3 URL");
++ TSDebug(PLUGIN_NAME, "Successfully signed the AWS S3 URL");
+ } else {
+ TSDebug(PLUGIN_NAME, "Failed to sign the AWS S3 URL, status = %d", status);
+ TSHttpTxnStatusSet(txnp, status);
+--- a/src/traffic_cache_tool/CacheTool.cc
++++ b/src/traffic_cache_tool/CacheTool.cc
+@@ -869,7 +869,7 @@ Span::updateHeader()
+ zret.push(0, errno, "Failed to update span - ", strerror(errno));
+ }
+ } else {
+- std::cout << "Writing not enabled, no updates perfomed" << std::endl;
++ std::cout << "Writing not enabled, no updates performed" << std::endl;
+ }
+ return zret;
+ }
+--- a/src/traffic_crashlog/traffic_crashlog.cc
++++ b/src/traffic_crashlog/traffic_crashlog.cc
+@@ -198,7 +198,7 @@ main(int /* argc ATS_UNUSED */, const ch
+ mgmterr = TSInit(nullptr, (TSInitOptionT)(TS_MGMT_OPT_NO_EVENTS | TS_MGMT_OPT_NO_SOCK_TESTS));
+ if (mgmterr != TS_ERR_OKAY) {
+ char *msg = TSGetErrorMessage(mgmterr);
+- Warning("failed to intialize management API: %s", msg);
++ Warning("failed to initialize management API: %s", msg);
+ TSfree(msg);
+ }
+
+--- a/src/traffic_logstats/logstats.cc
++++ b/src/traffic_logstats/logstats.cc
+@@ -1839,7 +1839,7 @@ process_file(int in_fd, off_t offset, un
+ unsigned second_read_size = sizeof(LogBufferHeader) - first_read_size;
+ nread = read(in_fd, &buffer[first_read_size], second_read_size);
+ if (!nread || EOF == nread) {
+- Debug("logstats", "Second read of header failed (attemped %d bytes at offset %d, got nothing), errno=%d.", second_read_size,
++ Debug("logstats", "Second read of header failed (attempted %d bytes at offset %d, got nothing), errno=%d.", second_read_size,
+ first_read_size, errno);
+ return 1;
+ }
+--- a/src/traffic_manager/traffic_manager.cc
++++ b/src/traffic_manager/traffic_manager.cc
+@@ -142,7 +142,7 @@ rotateLogs()
+ if (kill(tspid, SIGUSR2) != 0) {
+ mgmt_log("Could not send SIGUSR2 to TS: %s", strerror(errno));
+ } else {
+- mgmt_log("Succesfully sent SIGUSR2 to TS!");
++ mgmt_log("Successfully sent SIGUSR2 to TS!");
+ }
+ }
+ }
+--- a/src/traffic_server/CoreUtils.h
++++ b/src/traffic_server/CoreUtils.h
+@@ -44,7 +44,7 @@
+ #define PC_REGNUM 12 /* Contains program counter EIP */
+ #define FP_REGNUM 5 /* Virtual frame pointer EBP */
+ #define NO_OF_ARGS \
+- 10 /* The argument depth upto which we would be looking into \
++ 10 /* The argument depth up to which we would be looking into \
+ the stack */
+
+ // contains local and in registers, frame pointer, and stack base
+@@ -63,7 +63,7 @@ struct core_stack_state {
+ #include <assert.h>
+
+ #define NO_OF_ARGS \
+- 10 /* The argument depth upto which we would be looking into \
++ 10 /* The argument depth up to which we would be looking into \
+ the stack */
+
+ // contains local and in registers, frame pointer, and stack base
+--- a/src/traffic_server/InkAPITest.cc
++++ b/src/traffic_server/InkAPITest.cc
+@@ -4243,7 +4243,7 @@ REGRESSION_TEST(SDK_API_TSHttpHdr)(Regre
+ SDK_RPRINT(test, "TSHttpHdrUrlSet&Get", "TestCase1", TC_FAIL, "TSHttpHdrUrlSet returns TS_ERROR");
+ } else {
+ if (TSHttpHdrUrlGet(bufp1, hdr_loc1, &url_loc_Get) != TS_SUCCESS) {
+- SDK_RPRINT(test, "TSHttpHdrUrlSet&Get", "TestCase1", TC_FAIL, "TSHttpHdrUrlGet retuns TS_ERROR");
++ SDK_RPRINT(test, "TSHttpHdrUrlSet&Get", "TestCase1", TC_FAIL, "TSHttpHdrUrlGet returns TS_ERROR");
+ } else {
+ if (url_loc == url_loc_Get) {
+ SDK_RPRINT(test, "TSHttpHdrUrlSet&Get", "TestCase1", TC_PASS, "ok");
+--- a/src/tscore/ArgParser.cc
++++ b/src/tscore/ArgParser.cc
+@@ -154,7 +154,7 @@ ArgParser::parse(const char **argv)
+ };
+ // if there is anything left, then output usage
+ if (!args.empty()) {
+- std::string msg = "Unkown command, option or args:";
++ std::string msg = "Unknown command, option or args:";
+ for (auto it : args) {
+ msg = msg + " '" + it + "'";
+ }
+--- a/iocore/net/Socks.cc
++++ b/iocore/net/Socks.cc
+@@ -694,7 +694,7 @@ socks5PasswdAuthHandler(int event, unsig
+ // NEC thinks it is 5 RFC seems to indicate 1.
+ switch (p[1]) {
+ case 0:
+- Debug("Socks", "Username/Passwd succeded");
++ Debug("Socks", "Username/Passwd succeeded");
+ *h_ptr = nullptr;
+ break;
+
+--- a/iocore/net/UnixUDPNet.cc
++++ b/iocore/net/UnixUDPNet.cc
+@@ -628,7 +628,7 @@ UDPNetProcessor::CreateUDPSocket(int *re
+ }
+
+ if (safe_getsockname(fd, &local_addr.sa, &local_addr_len) < 0) {
+- Debug("udpnet", "CreateUdpsocket: getsockname didnt' work");
++ Debug("udpnet", "CreateUdpsocket: getsockname didn't work");
+ goto HardError;
+ }
+ }
+--- a/mgmt/Rollback.cc
++++ b/mgmt/Rollback.cc
+@@ -133,7 +133,7 @@ Rollback::Rollback(const char *fileName_
+ mgmt_log("[RollBack::Rollback] Automatic Rollback to prior version failed for %s : %s\n", fileName, strerror(errno));
+ needZeroLength = true;
+ } else {
+- mgmt_log("[RollBack::Rollback] Automatic Rollback to version succeded for %s\n", fileName, strerror(errno));
++ mgmt_log("[RollBack::Rollback] Automatic Rollback to version succeeded for %s\n", fileName, strerror(errno));
+ needZeroLength = false;
+ highestSeen--;
+ // Since we've made the highestVersion active
+--- a/proxy/logging/LogBuffer.cc
++++ b/proxy/logging/LogBuffer.cc
+@@ -270,7 +270,7 @@ LogBuffer::checkout_write(size_t *write_
+ }
+
+ if (switch_state(old_s, new_s)) {
+- // we succeded in setting the new state
++ // we succeeded in setting the new state
+ break;
+ }
+ }
+--- a/proxy/logging/LogObject.cc
++++ b/proxy/logging/LogObject.cc
+@@ -421,7 +421,7 @@ LogObject::_checkout_write(size_t *write
+
+ switch (result_code) {
+ case LogBuffer::LB_OK:
+- // checkout succeded
++ // checkout succeeded
+ retry = false;
+ break;
+
+--- a/doc/admin-guide/plugins/header_rewrite.en.rst
++++ b/doc/admin-guide/plugins/header_rewrite.en.rst
+@@ -330,7 +330,7 @@ The data that can be checked is ::
+ %{INBOUND:REMOTE-PORT} The client port for the connection.
+ %{INBOUND:TLS} The TLS protocol if the connection is over TLS, otherwise the empty string.
+ %{INBOUND:H2} The string "h2" if the connection is HTTP/2, otherwise the empty string.
+- %{INBOUND:IPV4} The string "ipv4" if the connection is IPv4, otherwise the emtpy string.
++ %{INBOUND:IPV4} The string "ipv4" if the connection is IPv4, otherwise the empty string.
+ %{INBOUND:IPV6} The string "ipv6" if the connection is IPv6, otherwise the empty string.
+ %{INBOUND:IP-FAMILY} The IP family, either "ipv4" or "ipv6".
+ %{INBOUND:STACK} The full protocol stack separated by ','.
+@@ -854,7 +854,7 @@ Variable Description
+ %<INBOUND:TLS> The TLS protocol for the inbound connection if it is over TLS, otherwise the
+ empty string.
+ %<INBOUND:H2> The string "h2" if the inbound connection is HTTP/2, otherwise the empty string.
+-%<INBOUND:IPV4> The string "ipv4" if the inbound connection is IPv4, otherwise the emtpy string.
++%<INBOUND:IPV4> The string "ipv4" if the inbound connection is IPv4, otherwise the empty string.
+ %<INBOUND:IPV6> The string "ipv6" if the inbound connection is IPv6, otherwise the empty string.
+ %<INBOUND:IP-FAMILY> The IP family of the inbound connection (either "ipv4" or "ipv6").
+ %<INBOUND:STACK> The full protocol stack of the inbound connection separated by ','.
+--- a/iocore/dns/SplitDNS.cc
++++ b/iocore/dns/SplitDNS.cc
+@@ -339,7 +339,7 @@ SplitDNSRecord::ProcessDNSHosts(char *va
+ if (tmp - current > (MAXDNAME - 1)) {
+ return "DNS server name (ip) is too long";
+ } else if (tmp - current == 0) {
+- return "server string is emtpy";
++ return "server string is empty";
+ }
+ *tmp = 0;
+ }
+--- a/lib/records/RecHttp.cc
++++ b/lib/records/RecHttp.cc
+@@ -435,7 +435,7 @@ HttpProxyPort::processOptions(const char
+ if (in_ip_set_p && m_family != m_inbound_ip.family()) {
+ std::string_view iname{ats_ip_family_name(m_inbound_ip.family())};
+ std::string_view fname{ats_ip_family_name(m_family)};
+- Warning("Invalid port descriptor '%s' - the inbound adddress family [%.*s] is not the same type as the explicit family value "
++ Warning("Invalid port descriptor '%s' - the inbound address family [%.*s] is not the same type as the explicit family value "
+ "[%.*s]",
+ opts, static_cast<int>(iname.size()), iname.data(), static_cast<int>(fname.size()), fname.data());
+ zret = false;
+--- a/proxy/ParentSelection.cc
++++ b/proxy/ParentSelection.cc
+@@ -517,7 +517,7 @@ ParentRecord::ProcessParents(char *val,
+ errPtr = "Parent hostname is too long";
+ goto MERROR;
+ } else if (tmp - current == 0) {
+- errPtr = "Parent string is emtpy";
++ errPtr = "Parent string is empty";
+ goto MERROR;
+ }
+ // Update the pRecords
+--- a/src/tscore/HostLookup.cc
++++ b/src/tscore/HostLookup.cc
+@@ -50,7 +50,7 @@ domaincmp(const char *hostname, const ch
+ const char *host_cur = hostname + strlen(hostname);
+ const char *domain_cur = domain + strlen(domain);
+
+- // Check to see if were passed emtpy stings for either
++ // Check to see if were passed empty stings for either
+ // argument. Empty strings do not match anything
+ //
+ if (domain_cur == domain || host_cur == hostname) {
+@@ -380,7 +380,7 @@ charIndex::Insert(const char *match_data
+
+ // Check to see if are at the level we supposed be at
+ if (*(match_data + 1) == '\0') {
+- // The slot should always be emtpy, no duplicate
++ // The slot should always be empty, no duplicate
+ // keys are allowed
+ ink_assert(cur->branch_array[index] == nullptr);
+ cur->branch_array[index] = toInsert;
+--- a/build/pkg.m4
++++ b/build/pkg.m4
+@@ -53,7 +53,7 @@ fi[]dnl
+ # to PKG_CHECK_MODULES(), but does not set variables or print errors.
+ #
+ # Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+-# only at the first occurence in configure.ac, so if the first place
++# only at the first occurrence in configure.ac, so if the first place
+ # it's called might be skipped (such as if it is within an "if", you
+ # have to call PKG_CHECK_EXISTS manually
+ # --------------------------------------------------------------
+--- a/include/tscpp/util/TextView.h
++++ b/include/tscpp/util/TextView.h
+@@ -265,7 +265,7 @@ public:
+ self_type prefix(size_t n) const;
+ /// Convenience overload to avoid ambiguity for literal numbers.
+ self_type prefix(int n) const;
+- /** Get the prefix delimited by the first occurence of the character @a c.
++ /** Get the prefix delimited by the first occurrence of the character @a c.
+
+ If @a c is not found the entire view is returned.
+ The delimiter character is not included in the returned view.
+@@ -273,7 +273,7 @@ public:
+ @return A view of the prefix.
+ */
+ self_type prefix(char c) const;
+- /** Get the prefix delimited by the first occurence of a character in @a delimiters.
++ /** Get the prefix delimited by the first occurrence of a character in @a delimiters.
+
+ If no such character is found the entire view is returned.
+ The delimiter character is not included in the returned view.
+--- a/iocore/cache/CacheVol.cc
++++ b/iocore/cache/CacheVol.cc
+@@ -400,7 +400,7 @@ CacheVC::scanOpenWrite(int /* event ATS_
+ // get volume lock
+ if (writer_lock_retry > SCAN_WRITER_LOCK_MAX_RETRY) {
+ int r = _action.continuation->handleEvent(CACHE_EVENT_SCAN_OPERATION_BLOCKED, nullptr);
+- Debug("cache_scan", "still havent got the writer lock, asking user..");
++ Debug("cache_scan", "still haven't got the writer lock, asking user..");
+ switch (r) {
+ case CACHE_SCAN_RESULT_RETRY:
+ writer_lock_retry = 0;
+--- a/iocore/eventsystem/I_IOBuffer.h
++++ b/iocore/eventsystem/I_IOBuffer.h
+@@ -680,7 +680,7 @@ public:
+ /**
+ Perform a memchr() across the list of IOBufferBlocks. Returns the
+ offset from the current start point of the reader to the first
+- occurence of character 'c' in the buffer.
++ occurrence of character 'c' in the buffer.
+
+ @param c character to look for.
+ @param len number of characters to check. If len exceeds the number
+--- a/iocore/net/OCSPStapling.cc
++++ b/iocore/net/OCSPStapling.cc
+@@ -99,7 +99,7 @@ stapling_get_issuer(SSL_CTX *ssl_ctx, X5
+
+ #ifdef SSL_CTX_select_current_cert
+ if (!SSL_CTX_select_current_cert(ssl_ctx, x)) {
+- Warning("OCSP: could not select current certifcate chain %p", x);
++ Warning("OCSP: could not select current certificate chain %p", x);
+ }
+ #endif
+
+--- a/mgmt/Alarms.cc
++++ b/mgmt/Alarms.cc
+@@ -297,7 +297,7 @@ Alarms::signalAlarm(alarm_t a, const cha
+ (*(func))(a, ip, desc);
+ }
+
+- /* Priority 2 alarms get signalled if they are the first unsolved occurence. */
++ /* Priority 2 alarms get signalled if they are the first unsolved occurrence. */
+ if (priority == 2 && !ip) {
+ execAlarmBin(desc);
+ }
+--- a/proxy/http/HttpSessionManager.cc
++++ b/proxy/http/HttpSessionManager.cc
+@@ -204,7 +204,7 @@ ServerSessionPool::eventHandler(int even
+ if (connection_count_below_min) {
+ Debug("http_ss",
+ "[%" PRId64 "] [session_bucket] session received io notice [%s], "
+- "reseting timeout to maintain minimum number of connections",
++ "resetting timeout to maintain minimum number of connections",
+ s->con_id, HttpDebugNames::get_event_name(event));
+ s->get_netvc()->set_inactivity_timeout(s->get_netvc()->get_inactivity_timeout());
+ s->get_netvc()->set_active_timeout(s->get_netvc()->get_active_timeout());
+--- a/plugins/lua/ts_lua_transform.c
++++ b/plugins/lua/ts_lua_transform.c
+@@ -89,7 +89,7 @@ ts_lua_transform_handler(TSCont contp, t
+ empty_input = 0;
+ if (!TSVIOBufferGet(input_vio)) {
+ if (transform_ctx->output.vio) {
+- TSDebug(TS_LUA_DEBUG_TAG, "[%s] reenabling ouput VIO after input VIO does not exist", __FUNCTION__);
++ TSDebug(TS_LUA_DEBUG_TAG, "[%s] reenabling output VIO after input VIO does not exist", __FUNCTION__);
+ TSVIONBytesSet(transform_ctx->output.vio, transform_ctx->total);
+ TSVIOReenable(transform_ctx->output.vio);
+ return 0;
+--- a/proxy/hdrs/HdrHeap.cc
++++ b/proxy/hdrs/HdrHeap.cc
+@@ -965,7 +965,7 @@ HdrHeap::unmarshal(int buf_length, int o
+ // Nothing to do
+ break;
+ default:
+- fprintf(stderr, "WARNING: Unmarshal failed due to unknow obj type %d after %d bytes", (int)obj->m_type,
++ fprintf(stderr, "WARNING: Unmarshal failed due to unknown obj type %d after %d bytes", (int)obj->m_type,
+ (int)(obj_data - (char *)this));
+ dump_heap(unmarshal_size);
+ return -1;
--- /dev/null
+Description: Fix Perl interpreter path
+Author: Jean Baptiste Favre <debian@jbfavre.org>
+Reviewed-by: Jean Baptiste Favre <debian@jbfavre.org>
+Last-Update: 2019-01-03
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/tools/tspush
++++ b/tools/tspush
+@@ -1,4 +1,4 @@
+-#!/usr/bin/env perl
++#!/usr/bin/perl
+
+ #
+ # Licensed to the Apache Software Foundation (ASF) under one
--- /dev/null
+Description: Update compilation chain after embedded libyamlcpp removal
+Author: Jean Baptiste Favre <debian@jbfavre.org>
+Origin: other
+Reviewed-by: Jean Baptiste Favre <debian@jbfavre.org>
+Last-Update: 2019-01-30
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -41,7 +41,6 @@ include_directories(lib
+ proxy/shared
+ lib/records
+ include/wccp
+- lib/yamlcpp/include
+ iocore/eventsystem
+ iocore/net
+ iocore/dns
+--- a/configure.ac
++++ b/configure.ac
+@@ -2074,7 +2074,6 @@ AC_CONFIG_FILES([
+ include/tscore/ink_config.h
+ lib/tsconfig/Makefile
+ src/wccp/Makefile
+- lib/yamlcpp/Makefile
+ mgmt/Makefile
+ mgmt/api/Makefile
+ mgmt/api/include/Makefile
+--- a/lib/Makefile.am
++++ b/lib/Makefile.am
+@@ -25,12 +25,6 @@ endif
+ # to prevent Clang Analyzer warning
+ LOCAL =
+
+-if BUILD_YAML_CPP
+-LOCAL += yamlcpp
+-endif
+-
+ all-local: $(LOCAL)
+- $(MAKE) -C yamlcpp
+
+ clean-local:
+- $(MAKE) -C yamlcpp clean
--- /dev/null
+Description: Fix test for python 3.8
+Author: Matthias Klose <doko@ubuntu.com>
+Reviewed-by: Jean Baptiste Favre <jbfavre@debian.org>
+Last-Update: 2020-02-03
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/tests/bootstrap.py
++++ b/tests/bootstrap.py
+@@ -94,7 +94,8 @@ def command_output(cmd_str):
+
+
+ def get_distro():
+- return linux_distribution()
++ import distro
++ return distro.linux_distribution()
+
+
+ def distro_version():
--- /dev/null
+0003-reproductible-build.patch
+0006-fix-doc-build.patch
+0008-fix-python-check-unused-dependencies.patch
+0009-fix-mysql-8-build.patch
+0011-fix-segfault.patch
+0012-fix-spelling-checks.patch
+0013-fix-perl-interpreter-path.patch
+0014-use_system_yaml-cpp.patch
+0016-fix_python_3.8.patch
--- /dev/null
+#!/usr/bin/make -f
+# -*- makefile -*-
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+export DEB_BUILD_MAINT_OPTIONS = hardening=+all
+export DEB_CFLAGS_MAINT_APPEND = -O3
+export DEB_CXXFLAGS_MAINT_APPEND = -O3
+# mips & mipsel need explicit libatomic link
+ifeq ($(DEB_HOST_ARCH),$(filter $(DEB_HOST_ARCH),mips mipsel))
+ export DEB_LDFLAGS_MAINT_APPEND += -latomic
+endif
+
+# Get build architecture. ./configure is different on Linux
+include /usr/share/dpkg/architecture.mk
+# Get rid f dpkg-parsechangelog
+include /usr/share/dpkg/pkg-info.mk
+
+configure_flags = \
+ --enable-layout=Debian \
+ --sysconfdir=/etc/trafficserver --libdir=/usr/lib/trafficserver \
+ --libexecdir=/usr/lib/trafficserver/modules \
+ --with-user=root --with-group=root --disable-silent-rules \
+ --enable-experimental-plugins --enable-32bit-build \
+ --enable-mime-sanity-check --enable-docs \
+ --with-build-version=$(DEB_VERSION) \
+ --with-yaml-cpp=/usr \
+ $(shell dpkg-buildflags --export=configure)
+
+ifeq ($(DEB_HOST_ARCH_OS),linux)
+ configure_flags += --enable-wccp
+endif
+
+%:
+ dh $@
+
+override_dh_auto_configure:
+ dh_auto_configure -- $(configure_flags)
+
+override_dh_auto_install:
+ dh_auto_install -- INSTALLDIRS=vendor
+ rm -f debian/tmp/usr/bin/trafficserver # We install our own
+ # Satisfy §10.2 (http://wiki.debian.org/ReleaseGoals/LAFileRemoval)
+ rm -f debian/tmp/usr/lib/trafficserver/lib*.la
+ rm -f debian/tmp/usr/lib/trafficserver/modules/*.la
+ rm -f debian/tmp/usr/lib/trafficserver/lib*.a
+ifneq ($(DEB_HOST_ARCH_OS),linux)
+ # Remove Linux-specific plugin
+ sed -i '/\/healthchecks\.so$$/d' \
+ debian/trafficserver.install
+endif
+
+override_dh_install:
+ dh_install
+ dh_missing --list-missing
+ ./debian/change_config.pl debian/trafficserver/etc/trafficserver/records.config
+ # Lintian fixes
+ mkdir -p debian/trafficserver/usr/share/doc/trafficserver
+ cat CHANGELOG-* >> debian/trafficserver/usr/share/doc/trafficserver/changelog
+ #rm debian/trafficserver-dev/usr/share/doc/trafficserver-dev/examples/ssl-preaccept/ssl_preaccept.config
+ #(cd debian/trafficserver-dev/usr/share/doc/trafficserver-dev/examples/ssl-preaccept/; \
+ #ln -s ssl_preaccept.config ssl_sni.config)
+
+override_dh_fixperms:
+ dh_fixperms -Xvar/lib/trafficserver \
+ -Xvar/log/trafficserver \
+ -Xvar/cache/trafficserver \
+ -Xvar/run/trafficserver
+ # Fix lintian warning
+ chmod -x debian/trafficserver-dev/usr/share/doc/trafficserver-dev/examples/remap_header_add/build.txt
+
+override_dh_installexamples:
+ dh_installexamples -XMakefile -X.libs -X.dirstamp -X.deps -X.la -X.lo
+
+override_dh_makeshlibs:
+ dh_makeshlibs -Xdebian/tmp/usr/lib/trafficserver
+
+override_dh_auto_test:
+ -dh_auto_test
--- /dev/null
+---
+include:
+ - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/salsa-ci.yml
+ - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/pipeline-jobs.yml
+
+variables:
+ RELEASE: 'stable'
+ SALSA_CI_DISABLE_APTLY: 1
+ SALSA_CI_DISABLE_BUILD_PACKAGE_I386: 1
+
+reprotest:
+ allow_failure: true
--- /dev/null
+3.0 (quilt)
--- /dev/null
+--extend-diff-ignore='examples/|diags.log|lib/perl/'
--- /dev/null
+debian/tmp/usr/include/*
+debian/tmp/usr/bin/tsxs
+debian/tmp/usr/lib/trafficserver/lib*.so
+debian/tmp/usr/lib/trafficserver/pkgconfig/trafficserver.pc
--- /dev/null
+debian/tmp/usr/share/man/man1/tsxs.1
+debian/tmp/usr/share/man/man3/*
--- /dev/null
+usr/lib/trafficserver/modules/access_control.so
+usr/lib/trafficserver/modules/acme.so
+usr/lib/trafficserver/modules/balancer.so
+usr/lib/trafficserver/modules/block_errors.so
+usr/lib/trafficserver/modules/buffer_upload.so
+usr/lib/trafficserver/modules/cache_fill.so
+usr/lib/trafficserver/modules/cache_key_genid.so
+usr/lib/trafficserver/modules/cache_range_requests.so
+usr/lib/trafficserver/modules/certifier.so
+usr/lib/trafficserver/modules/collapsed_forwarding.so
+usr/lib/trafficserver/modules/custom_redirect.so
+usr/lib/trafficserver/modules/fq_pacing.so
+usr/lib/trafficserver/modules/geoip_acl.so
+usr/lib/trafficserver/modules/header_freq.so
+usr/lib/trafficserver/modules/header_normalize.so
+usr/lib/trafficserver/modules/hipes.so
+usr/lib/trafficserver/modules/hook-trace.so
+usr/lib/trafficserver/modules/inliner.so
+usr/lib/trafficserver/modules/tsmemcache.so
+usr/lib/trafficserver/modules/memcached_remap.so
+usr/lib/trafficserver/modules/metalink.so
+usr/lib/trafficserver/modules/money_trace.so
+usr/lib/trafficserver/modules/mp4.so
+usr/lib/trafficserver/modules/multiplexer.so
+usr/lib/trafficserver/modules/mysql_remap.so
+usr/lib/trafficserver/modules/prefetch.so
+usr/lib/trafficserver/modules/remap_purge.so
+usr/lib/trafficserver/modules/remap_stats.so
+usr/lib/trafficserver/modules/server_push_preload.so
+usr/lib/trafficserver/modules/slice.so
+usr/lib/trafficserver/modules/ssl_cert_loader.so
+usr/lib/trafficserver/modules/sslheaders.so
+usr/lib/trafficserver/modules/stale_while_revalidate.so
+usr/lib/trafficserver/modules/stream_editor.so
+usr/lib/trafficserver/modules/system_stats.so
+usr/lib/trafficserver/modules/tls_bridge.so
+usr/lib/trafficserver/modules/traffic_dump.so
+usr/lib/trafficserver/modules/uri_signing.so
+usr/lib/trafficserver/modules/url_sig.so
--- /dev/null
+## Defaults for trafficserver initscript
+## sourced by /etc/init.d/trafficserver
+## installed at /etc/default/trafficserver by the maintainer scripts
+
+##
+## This is a POSIX shell fragment
+##
+
+## Variable: RUNDIR
+## Default: /var/run/trafficserver
+## Description: Set this to the directory where runtime data is stored. The
+## default value should work fine for almost all users.
+# RUNDIR=/var/run/trafficserver
+
+
+## Configuration for `traffic_manager'.
+## Meaning of variables is analogous to traffic_cop above, but for the
+## `traffic_manager' binary.
+
+TM_START=yes
+# TM_DAEMON_ARGS=""
+# TM_PIDFILE=$RUNDIR/manager.lock
+
+##
+## NOTICE:
+## Typically you do not want to configure anything below. Note, generally Traffic
+## Server is started through `traffic_cop' which is a watchdog to control any local
+## Traffic Server instances. It starts both, traffic_manager and traffic_server, as
+## does it monitor these processes. While it is generally not advised, you can
+## choose to manage both processes yourself. In such cases do not set TC_START to
+## "yes" and enable any service you want below.
+##
+## Choose either alternative, but do not mix up both.
+
+## Configuration for `traffic_server'.
+## Meaning of variables is analogous to traffic_cop above, but for the
+## `traffic_server' binary.
+
+# TS_START=no
+# TS_DAEMON_ARGS=""
+# TS_PIDFILE=$RUNDIR/server.lock
--- /dev/null
+/var/cache/trafficserver
+/var/log/trafficserver
--- /dev/null
+plugins/experimental/cacheurl/*.example
+plugins/experimental/mysql_remap/sample.ini
--- /dev/null
+#! /bin/sh
+
+### BEGIN INIT INFO
+# Provides: trafficserver
+# Required-Start: $remote_fs $syslog
+# Required-Stop: $remote_fs $syslog
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: init script for the Apache Traffic Server
+# Description: Apache Traffic Server is fast, scalable and extensible
+# HTTP/1.1 compliant caching proxy server.
+### END INIT INFO
+
+# Author: Arno Töll <debian@toell.net>
+#
+# This init script is derived from the source package's version shipped
+# along the source tarball as rc/trafficserver. Therefore it is a derivative
+# work and licensed as follows:
+#
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+DESC="Apache Traffic Server"
+NAME=trafficserver
+SCRIPTNAME=/etc/init.d/$NAME
+
+
+# Please do not touch TS_ROOT and TS_BASE. Traffic Server uses them
+# They are used to determine location of ATS components on the file
+# system.
+# According to DPM § 9.9 a program must not depend on the existance of
+# environment variables to work properly. Please report any errors if
+# you experience such a problem, for me it seems to work just fine with-
+# out
+ESED=/usr/bin/sed
+test -x $ESED || ESED=sed
+TS_PREFIX="/usr"
+TS_ROOT=${TS_ROOT:-$TS_PREFIX}
+
+# TS_BASE is offset inside the file system from where the layout starts
+# For standard installations TS_BASE will be empty
+eval TS_BASE="`echo $TS_ROOT | ${ESED} -e 's;/usr$;;'`"
+
+# Set some safe defaults. So not change values here, override them in
+# in /etc/default/trafficserver instead.
+# See there for a documentation as well
+
+RUNDIR=${RUNDIR:-$TS_BASE/var/run/trafficserver}
+
+TM_START=${TM_START:-no}
+TM_NAME=${TM_NAME:-traffic_manager}
+TM_DAEMON=${TM_DAEMON:-$TS_BASE/usr/bin/traffic_manager}
+TM_DAEMON_ARGS=""
+TM_PIDFILE=${TM_PIDFILE:-$RUNDIR/manager.lock}
+
+TS_START=${TS_START:-no}
+TS_NAME=${TS_NAME:-traffic_server}
+TS_DAEMON=${TS_DAEMON:-$TS_BASE/usr/bin/traffic_server}
+TS_DAEMON_ARGS=""
+TS_PIDFILE=${TS_PIDFILE:-$RUNDIR/server.lock}
+
+# Exit if the package is not installed
+[ -x "$TM_DAEMON" ] || exit 0
+
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+. /lib/lsb/init-functions
+
+# Check permissions of /etc/trafficserver.
+# Traffic Server needs write permissions, so warn the user if we suppose it
+# wouldn't.
+# The sysadmin is welcome to change the user ID that ATS uses. However to do that
+# in a clean and supported way, the administrator should overwrite the `stat override'
+# Debian installs by default in Trafficserver's postinst maintainer script.
+# Print a warning only.
+# Since this can't be safely determined by this script print a warning only, but
+# don't fail.
+CONF_DIR='/etc/trafficserver'
+USER=$(dpkg-statoverride --list "$CONF_DIR" | awk '{print $1}')
+OWNER=$(env stat -c '%U' "$CONF_DIR")
+if [ -d "$CONF_DIR" ] && [ ! "x$OWNER" = "x$USER" ] ; then
+ log_warning_msg "Configuration directory '$CONF_DIR' is not owned by user '$USER'. " \
+ "However Traffic Server needs write permissions to it."
+fi
+
+
+# Make sure $RUNDIR exists as the underlying file system
+# may be volatile (see § 9.3.2 from DPM)
+install -d -o trafficserver -g trafficserver -m 0755 "$RUNDIR"
+
+
+# A helper function, its purpose is to start a daemon.
+# Arguments are interpreted in order as follows:
+# 1) The executable path
+# 2) A string containing optional daemon arguments
+# 3) A (valid) path containing the PID file for the daemon
+# Returns:
+# 0 if daemon has been started
+# 1 if daemon was already running
+# 2 if daemon could not be started
+start_cmd()
+{
+ # Args
+ DAEMON=$1
+ DAEMON_ARGS=$2
+ PID=$3
+
+ #echo "\n\n"
+ #echo "d:" $DAEMON
+ #echo "da:" $DAEMON_ARGS
+ #echo "pid:" $PID
+
+ start-stop-daemon --start --quiet --pidfile $PID --exec $DAEMON --test > /dev/null \
+ || return 1
+ start-stop-daemon --start --quiet --background --pidfile $PID --exec $DAEMON -- \
+ $DAEMON_ARGS \
+ || return 2
+
+ return 0
+}
+
+
+# A helper function, its purpose is to stop a daemon.
+# Arguments are interpreted in order as follows:
+# 1) The daemon name (i.e. the binary name)
+# 2) The executable path
+# 3) A (valid) path containing the PID file for the daemon
+# Returns:
+# 0 if daemon has been stopped
+# 1 if daemon was already stopped
+# 2 if daemon could not be stopped
+# Another value if a failure occurred
+stop_cmd()
+{
+ NAME=$1
+ DAEMON=$2
+ PID=$3
+
+ start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PID --name $NAME
+ RETVAL="$?"
+ [ "$RETVAL" = 2 ] && return 2
+
+ start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+ [ "$?" = 2 ] && return 2
+
+ # Many daemons don't delete their pidfiles when they exit.
+ rm -f $PID
+ return "$RETVAL"
+}
+
+# The start function
+# This function does everything required to bring up the service
+# at boot time.
+# It does not accept any arguments
+do_start() {
+ if [ "x$TM_START" != "xno" ]; then
+ [ "$VERBOSE" != no ] && log_daemon_msg "Starting $TM_NAME"
+ start_cmd "$TM_DAEMON" "$TM_DAEMON_ARGS" "$TM_PIDFILE"
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ fi
+
+ if [ "x$TS_START" != "xno" ]; then
+ [ "$VERBOSE" != no ] && log_daemon_msg "Starting $TS_NAME"
+ start_cmd "$TS_DAEMON" "$TS_DAEMON_ARGS" "$TS_PIDFILE"
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ fi
+}
+
+
+# The stop function
+# This function does everything required to stop the service.
+# It does not accept any arguments
+do_stop() {
+ [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $TM_NAME"
+ stop_cmd "$TM_NAME" "$TM_DAEMON" "$TM_PIDFILE"
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+
+ [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $TS_NAME"
+ stop_cmd "$TS_NAME" "$TS_DAEMON" "$TS_PIDFILE"
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+}
+
+case "$1" in
+ start)
+ if [ "x$TM_START" = "xno" ] && [ "x$TS_START" = "xno" ]; then
+ [ "$VERBOSE" != no ] && log_warning_msg "Not starting $DESC"
+ else
+ do_start
+ fi
+ ;;
+ stop)
+ do_stop
+ ;;
+ status)
+ if [ "x$TM_START" != "xno" ] ; then
+ status_of_proc "$TM_DAEMON" "$TM_NAME" -p "$TM_PIDFILE" && exit 0 || exit $?
+ else
+ status_of_proc "$TS_DAEMON" "$TS_NAME" -p "$TS_PIDFILE" || exit $?
+ fi
+ ;;
+ restart|force-reload)
+ log_daemon_msg "Restarting $DESC" "$NAME\n"
+ do_stop
+ case "$?" in
+ 0|1)
+ do_start
+ case "$?" in
+ 0) log_end_msg 0 ;;
+ 1) log_end_msg 1 ;; # Old process is still running
+ *) log_end_msg 1 ;; # Failed to start
+ esac
+ ;;
+ *)
+ # Failed to stop
+ log_end_msg 1
+ ;;
+ esac
+ ;;
+ *)
+ echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+ exit 3
+ ;;
+esac
+
+:
--- /dev/null
+usr/bin/traffic_*
+usr/bin/tspush
+etc/trafficserver/*
+usr/lib/trafficserver/lib*.so.*
+usr/lib/trafficserver/modules/authproxy.so
+usr/lib/trafficserver/modules/background_fetch.so
+usr/lib/trafficserver/modules/cachekey.so
+usr/lib/trafficserver/modules/cache_promote.so
+usr/lib/trafficserver/modules/combo_handler.so
+usr/lib/trafficserver/modules/compress.so
+usr/lib/trafficserver/modules/conf_remap.so
+usr/lib/trafficserver/modules/escalate.so
+usr/lib/trafficserver/modules/esi.so
+usr/lib/trafficserver/modules/generator.so
+usr/lib/trafficserver/modules/header_rewrite.so
+usr/lib/trafficserver/modules/healthchecks.so
+usr/lib/trafficserver/modules/libloader.so
+usr/lib/trafficserver/modules/regex_remap.so
+usr/lib/trafficserver/modules/regex_revalidate.so
+usr/lib/trafficserver/modules/s3_auth.so
+usr/lib/trafficserver/modules/stats_over_http.so
+usr/lib/trafficserver/modules/tcpinfo.so
+usr/lib/trafficserver/modules/test_cppapi.so
+usr/lib/trafficserver/modules/tslua.so
+usr/lib/trafficserver/modules/xdebug.so
+usr/lib/perl5/* usr/share/perl5/
--- /dev/null
+rm_conffile /etc/trafficserver/vaddrs.config 8.0.0~ trafficserver
+rm_conffile /etc/trafficserver/metrics.config 8.0.0~ trafficserver
+rm_conffile /etc/trafficserver/logging.config 8.0.0~ trafficserver
+rm_conffile /etc/trafficserver/log_hosts.config 8.0.0~ trafficserver
+rm_conffile /etc/trafficserver/congestion.config 8.0.0~ trafficserver
+rm_conffile /etc/trafficserver/cluster.config 8.0.0~ trafficserver
+rm_conffile /etc/trafficserver/body_factory/default/congestion#retryAfter 8.0.0~ trafficserver
+rm_conffile /etc/trafficserver/icp.config 8.0.0~ trafficserver
+rm_conffile /etc/trafficserver/snapshosts 8.0.0~ trafficserver
--- /dev/null
+debian/tmp/usr/share/man/man1/traffic_*
+debian/tmp/usr/share/man/man1/tspush.1
+debian/tmp/usr/share/man/man8/traffic_*
+debian/tmp/usr/share/man/man5/*
--- /dev/null
+#! /bin/sh
+# postinst script for trafficserver
+#
+# see: dh_installdeb(1)
+#
+# Copyright 2011 Arno Toell <debian@toell.net>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+set -e
+
+USER='trafficserver'
+GROUP='trafficserver'
+USER_HOME='/var/run/trafficserver'
+OWNER=$(env stat -c '%U' /etc/trafficserver)
+OWNER_CACHE_DIR=$(env stat -c '%U' /var/cache/trafficserver)
+
+# summary of how this script can be called:
+# * <postinst> `configure' <most-recently-configured-version>
+# * <old-postinst> `abort-upgrade' <new version>
+# * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+# <new-version>
+# * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+# <failed-install-package> <version> `removing'
+# <conflicting-package> <version>
+# for details, see /usr/share/doc/packaging-manual/
+#
+# quoting from the policy:
+# Any necessary prompting should almost always be confined to the
+# post-installation script, and should be protected with a conditional
+# so that unnecessary prompting doesn't happen if a package's
+# installation fails and the `postinst' is called with `abort-upgrade',
+# `abort-remove' or `abort-deconfigure'.
+
+case "$1" in
+configure)
+
+ if ! getent passwd -- "$USER" >/dev/null 2>&1 ; then
+ adduser --home "$USER_HOME" \
+ --group \
+ --system \
+ --disabled-password \
+ --no-create-home \
+ --gecos "Debian Traffic Server user" \
+ $USER
+ fi
+
+ if [ -d /etc/trafficserver ] && [ "x$OWNER" = "xroot" ] ; then
+ # Ok, I admit I am lazy. I don't check every permission
+ # the user may have changed. If he didn't for /etc I can
+ # safely assume he neither has for other directories (I
+ # hope, since /etc requires write permissions by ATS).
+ echo 'Fixing permissions ...'
+
+ if ! dpkg-statoverride --list /etc/trafficserver >/dev/null 2>&1; then
+ dpkg-statoverride --update --add "$USER" "$GROUP" 0755 /etc/trafficserver
+ fi
+
+ if ! dpkg-statoverride --list /var/log/trafficserver >/dev/null 2>&1; then
+ dpkg-statoverride --update --add "$USER" adm 0750 /var/log/trafficserver
+ fi
+
+ if [ -d /var/cache/trafficserver ] && [ "x$OWNER_CACHE_DIR" = "xroot" ] ; then
+ if ! dpkg-statoverride --list /var/cache/trafficserver >/dev/null 2>&1; then
+ dpkg-statoverride --update --add "$USER" adm 0750 /var/cache/trafficserver
+ fi
+ fi
+ fi
+
+ if [ -n "$2" ] && dpkg --compare-versions "$2" 'le' '3.2~' ; then
+ RET=0
+ invoke-rc.d trafficserver status > /dev/null 2>&1 || RET=$?
+ # 0 => ATS is running
+ # 4 => Status is unknown
+ # 1,2,3 => ATS is not running
+
+ # using /bin/echo to make sure -e is supported
+ ECHO=`which echo`
+ if [ "$RET" -gt 0 ] && [ "$RET" -ne 4 ] && [ -f /var/cache/trafficserver/host.db ] ; then
+ echo "Purging TrafficServer cache upon upgrade."
+ RET=0
+ traffic_server -Cclear > /dev/null 2>&1 || RET=$?
+ if [ "$RET" -ne 0 ] ; then
+ $ECHO "======================================================================="
+ $ECHO -e "WARNING: Apache TrafficServer's cache couldn't be purged during the upgrade.\n" \
+ "Please inspect the situation manually and call 'traffic_server -Cclear'\n" \
+ "afterwards to purge the caches."
+ $ECHO "======================================================================="
+ fi
+ else
+ $ECHO "======================================================================="
+ $ECHO -e "WARNING: Apache TrafficServer is not running or its state couldn't be\n" \
+ "determined. Please inspect the situation manually and call\n" \
+ "'traffic_server -Cclear' afterwards to purge the caches.\n"
+ $ECHO "======================================================================="
+
+ fi
+ fi
+;;
+
+abort-upgrade|abort-remove|abort-deconfigure)
+
+;;
+
+*)
+echo "postinst called with unknown argument \`$1'" >&2
+exit 0
+;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+#
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+[Unit]
+Description=Apache Traffic Server is a fast, scalable and extensible caching proxy server.
+Documentation=man:traffic_server(8)
+After=network-online.target
+
+[Service]
+Type=simple
+EnvironmentFile=-/etc/default/trafficserver
+PIDFile=/run/trafficserver/manager.lock
+ExecStart=/usr/bin/traffic_manager $TM_DAEMON_ARGS
+ExecReload=/usr/bin/traffic_ctl config reload
+
+[Install]
+WantedBy=multi-user.target
--- /dev/null
+d /run/trafficserver 0755 trafficserver trafficserver
--- /dev/null
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+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+=099s
+-----END PGP PUBLIC KEY BLOCK-----
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+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=
+=Ycol
+-----END PGP PUBLIC KEY BLOCK-----
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+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+=L+Pn
+-----END PGP PUBLIC KEY BLOCK-----
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+
+mQENBFrfXOQBCADWH9KDvX6DbxbXMMzgLEGVYKikpV7JnOKTMFGfw1wN2+y67f0u
+87QSddKMqhHwINEMt7uzx308xiJYACJHGlQWT900D+D8HS1jUc7tGnnrATzFSePM
+oNXJWDQmGYn1WKVY91mQraXKrbKuw2CjhXLfaLc9xKq0/8bjcv5hDu71xRtwe7Tp
+A+6kPtyWqMjCEgzNQpKSP0hgEpmQvWq+K9ztJqZDn9giaclwLMXICHLwuL9V2miF
+xZwI1v5xQPpngzIMY84vpinIVVhKtx75jkAJhJ9fDRQT/jQ1q+iyyaCGtZKhboRJ
+Hsr4b20wbTLgWPxJevRvTRzr1Cem/scmoJSfABEBAAG0K0V2YW4gWmVsa293aXR6
+IDxldmFuX3plbGtvd2l0ekBjb21jYXN0LmNvbT6JAU4EEwEIADgCGwMFCwkIBwIG
+FQoJCAsCBBYCAwECHgECF4AWIQRzFEqoOxCpewTB6YMVrWLpQBBOlgUCXGsuWQAK
+CRAVrWLpQBBOlm86B/4jKArv5ennU5xTnsNFLV9CPLHYbf8rd+a7Lnahi96RpqtK
+2YYGAYV/E6LvyHkFJm3nTGgbp27GSWKlPm5rGbEmtMSn8jk/RzlcEkU4DHWjuvqI
+Xf0Vz5lXMOwcNHyIJpeadwrrWVUBP9Oy1ZUtg9am4aE26/YUqAdOaXVZPaqNuKJx
+u7R8oXHr9PCKRs4/jb/XqeZmf84hgaoILSDKu/lTk6G1hKcHSreWVd+X5TR+ikOa
+6DlfvOZ9ZO+Btwm/UypxRxJfx2WHQK3D/qDnlf1EBXcDOdbWSlGphcl4NkNrs+AT
+3Go4y2acTJhu7Z5x6fW4A5oI0AlzcjzdVS79aM1juQINBFzdnvYBEADp9RpqKDC3
+otvOJpCG4P1XVNwiRkc2UsIgm1PvrqLVVK2/g5tJRthuonmFMC7YxH0Z1UYlgekD
+291hCV5X78o9ThBvVbL67gp+GECRQmpY1jxgrqloPtZ0r6PN5QeOrKZ8orqdh9Ys
+fX6zn+QNF6pyaE5Z0JMs3rXk6GLBilwQXRlFzRX3imi6fpmj+S9dIy5SQUvG0e5W
+wiNKCu+zlHzZqtBskQNCkDdXfmolMxJ1lEUxBu9kigau+zg/R4veoL0U02hwLh4l
+JjeEOOGXr+t3mosPQkNCthmb+CHmuLiovm35e6v9LzVuvR+pke/aQlxCJU3ulroq
+m2sjhwhLjnxlTFcCuc6NJ22O81nW9Sl9dA8ShyXay+FUpIrP0CY5NFMBxtRTUG1T
+1iAVL1yb1igvDM0EB5lDsd6f41HlGjUDKkL7skPiALTSzAuJsL1F/x+jZxB1mSeD
+Hs4ephSaDPaiUbDSefpeYLaQ+JFei8Z75OWA6kMjHIbFwB8G0BGk0jQfTwNXl4Zu
+iSNYzwWp9rByhX6oqQ/8ddW1IJ3oHJ9mzDl1JIX7L5UHYYtYzj5UIEl68l3Hb4Ko
+PAArzBgosLvrCnCkCTiWbRQnmmTIVPxHADsqMJbkFuLLL1wnOItC2eWu/+yd2vcV
+hhyqxGfPzrlHPuc0l3Cno6K7YEZE4KKlPQARAQABiQE2BBgBCAAgFiEEcxRKqDsQ
+qXsEwemDFa1i6UAQTpYFAlzdnvYCGwwACgkQFa1i6UAQTpb37AgAyDuEfcduK0dH
+0SjUoJqSJ6dOkwOuF0T+IKYi5ixDflOxJGDnZdOc8NeTCdylZxuE33DGWHyIk74w
+Ituq3bzogkarYrxQBBmH49aGROy5l7kERDWeWQEujCPsREsntK5wYTMyhSap6g+f
+pbe6xVMs+bVxBWusBSJcu/VYlJTqgd/3nP9DtFCPzBM791GJ1ghITrLaLvm2uvAa
+KPxRnXZ07d2CDvfhqGrBam9nGQJ75owfcHxhdQGV25ftJjfJbM04JfhcS4j20V+i
+DUxN7dqtHLuFd7d3btOZiuGI3EOBWxePbRPh2/Ip9mVqzGp5CVRU0pfx22o4DRIS
+tVtp6zI6yA==
+=x5Qr
+-----END PGP PUBLIC KEY BLOCK-----
--- /dev/null
+version=4
+opts="pgpsigurlmangle=s/$/.asc/,dversionmangle=s/\+ds\d*$//,repacksuffix=+ds,repack,compression=xz" \
+ https://downloads.apache.org/trafficserver/ \
+ trafficserver-(8\.1\.\d+)\.tar\.bz2 \
+ debian uupdate
projects / trafficserver.git / commitdiff