BCM270X_DT: Add SMSC ethernet controller to DT

With an ethernet node in the DT, a suitable firmware can populate the
local-mac-address property, removing the need for a downstream patch
to the driver to read its MAC address from a module parameter.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

diff --git a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
index 51f575e5d201fdfc1632e9bc8ed3bbd3e55dddcb..08bf838fab551638e898930fba7ba49b3aeefbb3 100644 (file)
--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 #include "bcm2708.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
 
 / {
        model = "Raspberry Pi Model B+";

diff --git a/arch/arm/boot/dts/bcm2708-rpi-b.dts b/arch/arm/boot/dts/bcm2708-rpi-b.dts
index 028ef91a6c4f5d6573204635a03b912284505baa..4e6b4dd6a8d9c4f13bc865bb8ced68264162cb6c 100644 (file)
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 #include "bcm2708.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
 
 / {
        model = "Raspberry Pi Model B";

diff --git a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
index a4ffeff9fda62da830e674ff06c3a5394bd9d8cf..2dc0e1204e6374bbc6924e26dc4a04b68718559a 100644 (file)
--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 #include "bcm2709.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
 
 / {
        model = "Raspberry Pi 2 Model B";

diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
index d29ba72de727fe26b5a586e0bd0a41181c68ae04..78101849441679baf3624cf67a0ff7a2f1b34581 100644 (file)
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
@@ -5,6 +5,7 @@
 #endif
 
 #include "bcm2710.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
 
 / {
        model = "Raspberry Pi 3 Model B";