--- /dev/null
--- /dev/null
++How to switch between the various BLAS/LAPACK implementations
++=============================================================
++
++- BLAS:
++
++ $ sudo update-alternatives --config libblas.so.3-<multiarch>
++
++- LAPACK:
++
++ $ sudo update-alternatives --config liblapack.so.3-<multiarch>
++
++where <multiarch> is the multiarch path for you architecture (e.g.
++x86_64-linux-gnu for amd64).
++
++More information is available at:
++
++ http://wiki.debian.org/DebianScience/LinearAlgebraLibraries
++
++
++Building an optimized OpenBLAS package for your machine
++=======================================================
++
++On amd64, arm64, i386, loong64, ppc64el and s390x, libopenblas provides a
++multiple architecture library. All kernels are included in the library and the
++one matching best your processor is selected at run time. Recompiling locally
++should bring minimal performance improvement.
++
++On the contrary, on other architectures, the package is compiled with minimal
++optimizations, so that it can run on all hardware. You may want to recompile it
++locally for optimal performance.
++
++If you want to create a custom OpenBLAS package, optimized for your specific
++machine, proceed as follows.
++
++1) Install the build dependencies and the source of the package:
++
++ $ sudo apt-get build-dep openblas
++ $ apt-get source openblas
++
++2) Compile the package:
++
++ $ cd openblas-<UPSTREAM_VERSION>
++ $ DEB_BUILD_OPTIONS=custom dpkg-buildpackage -uc -b
++
++where <UPSTREAM_VERSION> is replaced with the appropriate value.
++
++3) When the build finishes, it should produce several .deb files, whose precise
++names you can figure out using:
++
++ $ ls ../libopenblas*.deb
++
++Install those that you want using dpkg. For the 32-bit indexing version, you
++need at least libopenblas0 and one of the three of
++libopenblas0-{openmp,pthread,serial}. For the 64-bit indexing version, you need
++at least libopenblas64-0 and one of the three of
++libopenblas64-0-{openmp,pthread,serial}
++
++4) If you don't want the Debian package manager to overwrite your optimized
++package with a generic one on system upgrades, you can mark the OpenBLAS
++package to be on hold, with the following command (for the 32-bit indexing
++version):
++
++ $ sudo apt-mark hold libopenblas0 libopenblas0-{openmp,pthread,serial}
++
++Don't forget however to periodically check whether a more recent version of the
++package is available for the Debian suite that you are tracking, in which case
++you should go again through this procedure. The version check can be performed
++using:
++
++ $ aptitude versions libopenblas0
++
++ -- Sébastien Villemot <sebastien@debian.org>, Sat, 9 Sep 2023 17:15:50 +0200
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 31 May 2011 13:56:22 +0200
--- /dev/null
--- /dev/null
++prefix=/usr
++libdir=${prefix}/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@
++includedir=${prefix}/include/@DEB_HOST_MULTIARCH@
++Name: openblas-blas@INDEXING@
++Description: Optimized BLAS (linear algebra) library based on GotoBLAS2
++Version: @DEB_VERSION_UPSTREAM@
++URL: https://github.com/xianyi/OpenBLAS
++Libs: -L${libdir} -lblas@INDEXING@
++Libs.private: -L${libdir} -lblas@INDEXING@ -lgfortran -lpthread -lm
++Cflags: -I${includedir}
--- /dev/null
--- /dev/null
++openblas (0.3.25+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.25+ds
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 14 Nov 2023 20:25:25 +0100
++
++openblas (0.3.24+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.24+ds
++ * d/copyright: reflect upstream changes
++ * mips64-generic.patch: drop patch, applied upstream
++ * revert-lapack-gedmd.patch: new patch for compiling against LAPACK 3.11
++ * Build on loong64 architecture
++ * d/rules: pass the number of requested parallel jobs to the build system.
++ Previously the build system would always use as many parallel jobs as there
++ are logical CPU cores.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 09 Sep 2023 18:58:39 +0200
++
++openblas (0.3.23+ds-3) unstable; urgency=medium
++
++ * mips64-generic.patch: new patch from upstream.
++ Fixes incorrect numerical results on mips64el. (Closes: #1043048)
++ * shared-blas-lapack.patch: restore missing symbols in liblapack64.so.3.
++ Many symbols were inadvertently dropped in version 0.3.22+ds-1,
++ because of the overhaul of no-embedded-lapack.patch that removed the
++ lapack64-netlib directory. (Closes: #1039904)
++ * shared-blas-lapack.patch: add missing clean rule for lib{blas,lapack}64.so.3
++ * Remove all references to kfreebsd-{amd64,i386} ports
++ * README.Debian: update binary packages names for custom installation
++ procedure
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 06 Aug 2023 20:45:18 +0200
++
++openblas (0.3.23+ds-2) unstable; urgency=medium
++
++ * Upload to unstable
++ * kfreebsd.patch: drop patch, the GNU/kFreeBSD ports have been abandoned
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 13 Jun 2023 10:48:52 +0200
++
++openblas (0.3.23+ds-1) experimental; urgency=medium
++
++ * New upstream version 0.3.23+ds
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 01 Apr 2023 23:47:25 +0200
++
++openblas (0.3.22+ds-1) experimental; urgency=medium
++
++ * New upstream version 0.3.22+ds
++ * d/copyright: reflect upstream changes
++ * Drop patches applied upstream
++ + mips64el-utest-dnrm2.patch
++ + pr-3718-ppc64el-segfault.patch
++ * d/rules: use new MIPS64_GENERIC target to build on mips64el
++ * Set upstream metadata fields: Security-Contact.
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 28 Mar 2023 21:11:15 +0200
++
++openblas (0.3.21+ds-4) unstable; urgency=medium
++
++ * Manage CMake files through the alternatives system.
++ For consistency with the pkgconfig files.
++ * Bump S-V to 4.6.2
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 19 Dec 2022 16:03:51 +0100
++
++openblas (0.3.21+ds-3) unstable; urgency=medium
++
++ * Install CMake files under /usr/lib/$(MULTIARCH)/cmake/openblas$(FLAVOR)/
++ Thanks to Juan Jose Garcia Ripoll for reporting (Closes: #1000332)
++ * no-embedded-lapack.patch: fix logic for detecting build with 64-bit
++ indexing. In particular, this fixes the riscv64 packages whose embedded
++ LAPACK routines were unusable with 32-bit indexing.
++ Thanks to Дмитрий Ермилов (Closes: #1022950)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 27 Nov 2022 21:22:10 +0100
++
++openblas (0.3.21+ds-2) unstable; urgency=medium
++
++ [ Mo Zhou ]
++ * Cherry-pick upstream commit to fix ppc64el FTBFS.
++
++ [ Sébastien Villemot ]
++ * mips64el-utest-dnrm2.patch: new patch from upstream, fixes FTBFS on mips64el
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 14 Sep 2022 13:07:58 +0200
++
++openblas (0.3.21+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.21+ds
++ * d/copyright: reflect upstream changes
++ * d/control: drop transitional libopenblas-base package, no longer needed
++ * Bump S-V to 4.6.1
++ * Update renamed lintian tag names in lintian overrides.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 14 Aug 2022 22:37:14 +0200
++
++openblas (0.3.20+ds-2) unstable; urgency=medium
++
++ * Remove deprecated xCOMBSSQ lapack routines. (Closes: #1011386)
++ * Remove bin:libjulia-openblas64, which is no longer needed.
++ Exporting libopenblas64_.so with SYMBOLSUFFIX=64_ in Julia private
++ library as an external dependency introduces complication in Julia
++ package compiling process. We currently do not have proposal to
++ put libopenblas64_.so (with symbol suffix) in the public library,
++ because that will eventually lead to NINE variants to build for amd64:
++ (1) LP64 (32-bit indexing), three threading models, default;
++ (2) ILP64 (64-bit indexing), three threading models, no symbol suffix;
++ (3) ILP64 (64-bit indexing), three threading models, symbols suffix 64_.
++ Currently we only provide the (1) and (2) combinations, because BLAS
++ libraries without symbol mangling can still be alternated to e.g. MKL.
++
++ -- Mo Zhou <lumin@debian.org> Sat, 21 May 2022 16:25:13 -0400
++
++openblas (0.3.20+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.20+ds
++ * d/copyright: reflect upstream changes
++ * mips64el.patch, avx512-dgemm.patch: drop patches, applied upstream
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 21 Feb 2022 11:14:52 +0100
++
++openblas (0.3.19+ds-3) unstable; urgency=medium
++
++ * avx512-dgemm.patch: new patch, fixes DGEMM regression on AVX-512 CPUs
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 14 Jan 2022 15:21:00 +0100
++
++openblas (0.3.19+ds-2) unstable; urgency=medium
++
++ * mips64el.patch: new patch, should fix FTBFS on mips64el
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 10 Jan 2022 12:26:34 +0100
++
++openblas (0.3.19+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.19+ds
++ + fixes segfault of pthread flavour when running out of memory
++ (Closes: #995450)
++ * d/copyright: reflect upstream changes
++ * 3422.patch (trsv shortcut revert): drop patch, applied upstream
++ * Tighten Build-Depends on liblapack{,64}-dev to >= 3.10.0-2~
++ This ensures that the fix for CVE-2021-4048 is incorporated.
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 20 Dec 2021 13:27:29 +0100
++
++openblas (0.3.18+ds-2) unstable; urgency=medium
++
++ * Team upload.
++ * Revert invalid trsv shortcut. Fixes crash in yade-package.
++
++ -- Anton Gladky <gladk@debian.org> Sat, 30 Oct 2021 02:01:09 +0200
++
++openblas (0.3.18+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.18+ds
++ * d/copyright: reflect upstream changes
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 03 Oct 2021 10:51:28 +0200
++
++openblas (0.3.17+ds-3) unstable; urgency=medium
++
++ * Rebuild against lapack 3.10.0
++ * Bump S-V to 4.6.0
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 20 Sep 2021 17:41:09 +0200
++
++openblas (0.3.17+ds-2) unstable; urgency=medium
++
++ * Upload to unstable
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 16 Aug 2021 19:45:15 +0200
++
++openblas (0.3.17+ds-1) experimental; urgency=medium
++
++ * New upstream version 0.3.17+ds
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 20 Jul 2021 22:19:53 +0200
++
++openblas (0.3.16+ds-1) experimental; urgency=medium
++
++ * New upstream version 0.3.16+ds
++ * Really disable DYNAMIC_ARCH on ppc64
++ * Downgrade to TARGET=POWER4 on ppc64.
++ This seems closer to the baseline for this architecture.
++ * Improve package description w.r.t. dynamic arch vs local recompilation
++ * Add missing files in clean rule
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 13 Jul 2021 12:32:31 +0200
++
++openblas (0.3.15+ds-1) experimental; urgency=medium
++
++ * New upstream version 0.3.15+ds
++ * fix-arm64-sigill.patch: drop patch, applied upstream
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 04 May 2021 17:31:41 +0200
++
++openblas (0.3.14+ds-2) experimental; urgency=medium
++
++ * fix-arm64-sigill.patch: new patch, fixes SIGILL on arm64 with numpy.
++ Thanks to Thomas Viehmann <tv@beamnet.de> (Closes: #986996)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 18 Apr 2021 11:08:29 +0200
++
++openblas (0.3.14+ds-1) experimental; urgency=medium
++
++ * New upstream version 0.3.14+ds
++ * riscv64-supported.patch: drop patch, applied upstream
++ * d/watch: update following GitHub URL renaming
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 04 Apr 2021 18:34:37 +0200
++
++openblas (0.3.13+ds-2) unstable; urgency=medium
++
++ [ Gianfranco Costamagna ]
++ * Enable dynamic arch support on s390x. (LP: #1893653) (Closes: #981048)
++ + Also change control file references, thanks Marius Hillenbrand (mhillen)
++
++ [ Aurelien Jarno ]
++ * Enable support for riscv64 (Closes: #978633)
++
++ -- Mo Zhou <lumin@debian.org> Wed, 27 Jan 2021 13:56:54 +0800
++
++openblas (0.3.13+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.13+ds
++ * d/copyright: reflect upstream changes
++ * reunify-arm64-buffersize.patch: drop patch, applied upstream
++ * Bump S-V to 4.5.1
++
++ -- Sébastien Villemot <sebastien@debian.org> Thu, 17 Dec 2020 13:53:00 +0100
++
++openblas (0.3.12+ds-2) unstable; urgency=medium
++
++ * reunify-arm64-buffersize.patch: new patch from upstream (Closes: #970558)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 01 Nov 2020 10:47:26 +0100
++
++openblas (0.3.12+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.12+ds
++ * fix-dynamic-arch-gemm-crashes.patch: drop patch, applied upstream
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 26 Oct 2020 17:52:08 +0100
++
++openblas (0.3.10+ds-3) unstable; urgency=medium
++
++ [ Mo Zhou ]
++ * Fix confusion bug in the libblas.so.3->libopenblas.so.0 linkage.
++ We added -Wl,-rpath,'$ORIGIN' in the RPATH attribute of the libblas.so.3
++ shared objects. Without this fix, `ldd openblas-serial/libblas.so.3`
++ will resolve the libopenblas.so.0 dependency to the symbol link
++ controlled by the alternatives mechanism, e.g. libopenblas.so.0 ->
++ openblas-pthread/libopenblas.so.0, which breaks the literal meaning
++ of the user's libblas.so.3 <--provies-- openblas-serial configuration.
++ * Remove the unnecessary dh_shlibdeps overrides.
++ * Remove ${shlibs:Depends} dependency from -dev and -meta packages.
++ * Fix symbol mangling for libjulia-openblas64.
++ * B-D on lapack (>= 3.9.0-3) for BLAS64 version of deprecated routines.
++
++ [ Sébastien Villemot ]
++ * d/rules: ensure that shared-library flavoured packages do not depend on
++ libopenblas{64-,}0 metapackages. A circular dependency:
++ libopenblas0 → libopenblas0-{pthread,openmp,serial} → libopenblas0
++ was introduced in 0.3.10+ds-2, since lib{blas,lapack}.so.3 is (again)
++ dynamically linked against libopenblas0. We break the loop manually at the
++ dpkg-shlibdeps level. (Closes: #966607)
++
++ -- Mo Zhou <lumin@debian.org> Sat, 01 Aug 2020 23:25:44 +0800
++
++openblas (0.3.10+ds-2) unstable; urgency=medium
++
++ * lib{blas,lapack}.so.3 are again dynamically linked against libopenblas.so.0.
++ This restores the pre-multi-flavour behaviour.
++ Incidentally, this brings back the possibility of checking at runtime for
++ the presence of openblas_get_config symbol. (Closes: #960728)
++ * fix-dynamic-arch-gemm-crashes.patch: new patch (Closes: #966175)
++ * Add debian/upstream/metadata
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 29 Jul 2020 14:51:22 +0200
++
++openblas (0.3.10+ds-1) unstable; urgency=medium
++
++ [ Mo Zhou ]
++ * New upstream version 0.3.10+ds
++ * Refresh existing patches.
++
++ [ Sébastien Villemot ]
++ * d/copyright: reflect upstream changes
++
++ -- Mo Zhou <lumin@debian.org> Tue, 07 Jul 2020 19:50:08 +0800
++
++openblas (0.3.9+ds-3) unstable; urgency=medium
++
++ [ Sébastien Villemot ]
++ * Remove B-D on dh-exec, no longer needed since debhelper 13
++ * On Ubuntu, strip -Wl,-Bsymbolic-functions from LDFLAGS (Closes: #961725)
++ * Update Homepage to https://www.openblas.net
++
++ [ Mo Zhou ]
++ * Let libopenblas64-julia Conflict & Replace libjulia1 (<< 1.4.1+dfsg-1)
++ (Closes: #963223)
++ * Upload to unstable.
++
++ -- Mo Zhou <lumin@debian.org> Thu, 25 Jun 2020 17:39:59 +0800
++
++openblas (0.3.9+ds-2) experimental; urgency=medium
++
++ * Build the custom version of OpenBLAS for Julia.
++ * Update my mail address in Uploaders.
++ * Bump debhelper compat level to 13 (no change).
++
++ -- Mo Zhou <lumin@debian.org> Thu, 14 May 2020 19:06:33 +0800
++
++openblas (0.3.9+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.9+ds
++ * d/copyright: reflect upstream changes
++ * Drop link-tests-openmp.patch.
++ Replace it by adding -fopenmp to FCOMMON_OPT at the relevant places in
++ debian/rules.
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 20 Mar 2020 14:40:43 +0100
++
++openblas (0.3.8+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.8+ds
++ + unfortunately we cannot enable dynamic arch for s390x, because it will
++ not work correctly on pre-Z13 systems (there is no fallbak on
++ ZARCH_GENERIC, see driver/other/dynamic_zarch.c)
++ * d/copyright: reflect upstream changes
++ * dgemm-test-without-lapacke.patch: drop patch, applied upstream
++ * Remove spurious TARGET setting for ppc64el, which has dynamic arch
++ * Bump S-V to 4.5.0
++ * d/rules: do not run testsuite in override_dh_auto_build.
++ It is already run in override_dh_auto_test.
++ Also honour DEB_BUILD_OPTIONS=nocheck.
++ * d/rules: ensure that whole build fails if build/test/install fails for one
++ flavour
++ * Remove unused override for libopenblas-dev
++ * link-tests-openmp.patch: new patch, fixes build failure in OpenMP variants
++
++ -- Sébastien Villemot <sebastien@debian.org> Thu, 13 Feb 2020 18:52:52 +0100
++
++openblas (0.3.7+ds-7) unstable; urgency=medium
++
++ * Fix (piuparts) install failure due to missing dir. (Closes: #946828)
++ * Autopkgtest: print libopenblas{,64} selection before the test.
++
++ -- Mo Zhou <cdluminate@gmail.com> Wed, 18 Dec 2019 23:38:15 +0800
++
++openblas (0.3.7+ds-6) unstable; urgency=medium
++
++ * Restore pkgconfig’s openblas.pc (for 32-bit indexing)
++ This file is now managed by the alternatives system, since there are several
++ variants of it. (Closes: #946698)
++ By the way, add openblas64.pc (for 64-bit indexing).
++ * Fix alternatives symlink for openblas64_config.h (64-bit indexing variants)
++ * Drop empty postrm script for libopenblas-dev
++ * Make long description of libopenblas0 different from that of
++ libopenblas64-0.
++ Similar change for libopenblas-dev vs. libopenblas64-dev.
++ * Fix the blas{,64}.pc and lapack{,64}.pc alternatives.
++ For 32-bit indexing, the files pointed to an inexistent $libdir.
++ The 64-bit indexing variants were pointing to 32-bit libraries.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 15 Dec 2019 22:02:19 +0100
++
++openblas (0.3.7+ds-5) unstable; urgency=medium
++
++ * Link the OMP variant of shared blas/lapack against gomp. (Closes: #945791)
++
++ -- Mo Zhou <cdluminate@gmail.com> Mon, 02 Dec 2019 13:33:33 +0800
++
++openblas (0.3.7+ds-4) unstable; urgency=medium
++
++ * Don’t run the 64-bit autopkgtests on 32-bit architectures.
++ Thanks to Matthias Klose (Closes: #944474)
++ * Bump S-V to 4.4.1
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 27 Nov 2019 17:49:02 +0100
++
++openblas (0.3.7+ds-3) unstable; urgency=medium
++
++ * Upload to unstable. (no change).
++
++ -- Mo Zhou <cdluminate@gmail.com> Thu, 31 Oct 2019 20:46:13 +0800
++
++openblas (0.3.7+ds-2) experimental; urgency=medium
++
++ [ Multi-Flavour Update of OpenBLAS (Closes: #878121, #684344) ]
++ * (32-bit, 64-bit)-index * (pthread, openmp, serial)-threadding = 6 Variants.
++ Each one assigned with different priority values in alternatives system:
++ + libopenblas0-{pthread,openmp,serial} (priority = 100,95,90)
++ * Provides: libopenblas.so.0, libblas.so.3, liblapack.so.3
++ + libopenblas64-0-{pthread,openmp,serial} (priority = 100,95,90)
++ * Provides: libopenblas64.so.0, libblas64.so.3, liblapack64.so.3
++ - 64-bit-indexing versions are only available on 64-bit archs.
++ * Let libopenblas0 and libopenblas64-0 be meta packages. They pull one of the
++ three threadding variants. On resolving shlib dependencies, these meta
++ packages, instead of specific variants used for building, should be used as
++ the dependencies.
++ * Turn libopenblas-base into a transitional dummy package.
++ * Update/Create control files and maintscripts for all these variants.
++ * Autopkgtest: test all the 6 variants.
++
++ [ Mo Zhou ]
++ * Append myself to Uploaders.
++ * Simplify architecture detection part of rules.
++ * Bump B-D lapack to >= 3.8.0-5 (for liblapack64-dev).
++ * rules: Deparallelize build targets to avoid messy buildlog
++ * Update existing patches accordingly for the new feature.
++ * Merge order-files.patch into shared-blas-lapack.patch
++ * Create template postrm for libopenblas-dev to avoid leftover.
++ * Remove the unnecessary overrides from rules.
++ * Upload to experimental.
++
++ -- Mo Zhou <cdluminate@gmail.com> Fri, 25 Oct 2019 21:03:40 +0800
++
++openblas (0.3.7+ds-1) unstable; urgency=medium
++
++ * Revert dynamic arch selection on ppc64, it FTBFS
++ * New upstream version 0.3.7+ds
++ * dgemm-test-without-lapacke.patch: new patch taken from upstream.
++ Required to avoid FTBFS.
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 20 Aug 2019 17:52:34 +0200
++
++openblas (0.3.6+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.6+ds
++ * Remove patches applied upstream
++ + skylakex-dgemm.patch
++ + target-generic.patch
++ * Enable dynamic arch selection on ppc64el and ppc64
++ * Bump S-V to 4.4.0
++ * Bump debhelper compat level to 12
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 08 Jul 2019 14:24:15 +0200
++
++openblas (0.3.5+ds-3) unstable; urgency=medium
++
++ * Fix FTBFS when CPU of the build machine is not detected (amd64, arm64, i386)
++ - pass TARGET=GENERIC when building with DYNAMIC_ARCH=1
++ - target-generic.patch: new patch taken from upstream, makes the above
++ possible
++ (Closes: #923607)
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 11 Mar 2019 10:18:39 +0100
++
++openblas (0.3.5+ds-2) unstable; urgency=medium
++
++ * skylakex-dgemm.patch: new patch, fixes DGEMM regression on SkylakeX.
++ Thanks to Mo Zhou (Closes: #921698)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 09 Feb 2019 10:38:22 +0100
++
++openblas (0.3.5+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.5+ds
++ * Bump S-V to 4.3.0
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 04 Jan 2019 10:28:31 +0100
++
++openblas (0.3.4+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.4+ds
++ * d/copyright: reflect upstream changes
++ * Dynamic kernel selection is now implemented on arm64
++ * Switch to new way of specifying debhelper compat level
++ * Increase priority in alternatives system to 100 (Closes: #911131)
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 07 Dec 2018 15:49:27 +0100
++
++openblas (0.3.3+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.3+ds
++ * Bump Standards-Version to 4.2.1
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 07 Sep 2018 16:32:43 +0200
++
++openblas (0.3.2+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.2+ds
++ + fixes regression that induced incorrect SVD computation
++ (Closes: #903659)
++ * Bump to debhelper compat level 11
++ * Add Rules-Requires-Root: no
++ * Bump S-V to 4.1.5
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 31 Jul 2018 18:28:12 +0200
++
++openblas (0.3.1+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.1
++ + cblas_* now take a void* for complex arrays (Closes: #877883)
++ * d/copyright: reflect upstream changes
++ * force-zarch.patch: remove patch, applied upstream
++ * Compile with DYNAMIC_OLDER=1, for better support of old amd64 CPUs
++ * Remove Built-Using field.
++ Since both LAPACK and ATLAS are under BSD-3-clause, there is no reason to
++ use this field (which is now restricted to license compliance issues).
++ * d/rules: remove get-orig-source target.
++ * Bump to S-V 4.1.4
++ * Replace ADTTMP by AUTOPKGTEST_TMP in tests.
++ * Ship *.md files in libopenblas-dev
++ * Update Vcs-* fields for move to salsa
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 04 Jul 2018 10:53:01 +0200
++
++openblas (0.2.20+ds-4) unstable; urgency=medium
++
++ * Add support for s390x.
++ New patch force-zarch.patch introduced to force the generic build.
++ (Closes: #875618)
++ * Enforce TARGET=POWER6 on ppc64, to avoid FTBFS on some buildds.
++ * Drop obsolete code for -dbgsym migration.
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 19 Sep 2017 14:51:23 +0200
++
++openblas (0.2.20+ds-3) unstable; urgency=low
++
++ * Multi-archify the package.
++ Incidentally, remove the dependency of libopenblas-dev on libblas-dev, since
++ cblas.h is now managed by the alternative.
++ * Ship openblas.pc in libopenblas-dev.
++ * Improve README.Debian for building a custom package
++ * Bump Standards-Version to 4.1.0.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 09 Sep 2017 10:29:44 +0200
++
++openblas (0.2.20+ds-2) unstable; urgency=medium
++
++ * d/rules: explicitly disable OpenMP, with USE_OPENMP=0.
++ Otherwise it gets enabled on powerpc and ppc64*, leading to FTBFS.
++
++ -- Sébastien Villemot <sebastien@debian.org> Thu, 27 Jul 2017 20:06:14 +0200
++
++openblas (0.2.20+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.2.20+ds
++ * d/watch: add +ds suffix to orig tarball, since we're repacking it.
++ * Drop patches applied upstream:
++ + mips-implement-mb-and-wmb.patch
++ + mips-remove-incorrect-blas_lock-implementation.patch
++ * d/copyright:
++ + reflect upstream changes, filter out relapack.
++ + use secure URL for format.
++ * Add support for sparc64.
++ Thanks to James Clarke for the patch (Closes: #866509)
++ * d/rules: Re-enable testsuite on powerpc.
++ Treating powerpc differently is not warranted, especially since it is no
++ longer a release architecture.
++ * Use DEB_BUILD_OPTIONS=custom as new interface for building custom package.
++ By the way, no longer automatically append a changelog entry.
++ (Closes: #854784)
++ * d/control:
++ + bump Standards-Version to 4.0.0.
++ + tighten versioned build-dependency on liblapack-pic to ≥ 3.7.0.
++ + use canonical URL for Vcs-Browser.
++
++ -- Sébastien Villemot <sebastien@debian.org> Thu, 27 Jul 2017 18:17:19 +0200
++
++openblas (0.2.19-3) unstable; urgency=medium
++
++ * New patches that fix threading issue on mips64el.
++ + d/p/mips-implement-mb-and-wmb.patch
++ + d/p/mips-remove-incorrect-blas_lock-implementation.patch
++ Thanks to James Cowgill (Closes: #861486)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 06 May 2017 15:22:06 +0200
++
++openblas (0.2.19-2) unstable; urgency=medium
++
++ * Also build libopenblas-dev on mips64el. (Closes: #852283)
++ * Bump debhelper compat level to 10.
++ * d/watch: bump to format version 4.
++ * Add "-march=native -mtune=native" to CFLAGS when building custom package.
++ (Closes: #844509)
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 23 Jan 2017 15:06:15 +0100
++
++openblas (0.2.19-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.19
++ * d/p/always-run-testsuite.patch: drop patch, no longer needed.
++ * Add support for mips64el.
++ * d/p/order-files.patch: new patch, makes build reproducible.
++ Thanks to Alexis Bienvenüe (Closes: #824639)
++ * d/README.Debian: explain that recompilation is useful on non-x86 archs.
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 06 Sep 2016 20:24:32 +0200
++
++openblas (0.2.18-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.18
++ * d/control: bump Standards-Version to 3.9.8, no changes needed.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 17 Apr 2016 18:40:31 +0200
++
++openblas (0.2.17-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.17
++ * d/copyright: reflect upstream changes.
++ * d/p/power-arch-detection.patch: drop patch, applied upstream.
++ * d/p/matgen-symbols-not-included.patch: new patch.
++ Needed because MATGEN symbols are not included in the Debian binary.
++ * d/control:
++ + bump Standards-Version to 3.9.7, no changes needed.
++ + use secure URLs in Vcs-* fields.
++ * Drop libopenblas-dbg, now rely on automatic debug package.
++
++ -- Sébastien Villemot <sebastien@debian.org> Thu, 24 Mar 2016 15:11:45 +0100
++
++openblas (0.2.15-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.15
++ * debian/copyright: reflect upstream changes.
++ * Remove patches applied upstream:
++ + debian/patches/arm-arch-detection.patch
++ + debian/patches/arm64.patch
++ + debian/patches/disable-gemm3m-tests.patch
++ * Build on ppc64el arch, which is now supported by upstream.
++ * d/p/power-arch-detection.patch: new patch.
++ Ensures that the testsuite is run on ppc64el and ppc64.
++ However, don't enable it on powerpc, because it crashes…
++ * Tighten B-D on lapack to >= 3.5.0-5~, in order to get latest patches.
++ * Remove obsolete Conflicts/Replaces against lib{blas,lapack}3gf.
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 10 Nov 2015 23:24:12 +0100
++
++openblas (0.2.14-1) unstable; urgency=low
++
++ * Imported Upstream version 0.2.14
++ * debian/copyright: reflect upstream changes.
++ * debian/rules: remove TARGET=GENERIC flag when building dynamic arch binary.
++ This flag creates a compilation failure and seems no longer needed.
++ * Add a debug package. (Closes: #783639)
++ * debian/control: improve short description of packages.
++ * Add autopkgtest support, relying on upstream testsuite.
++ + debian/tests/upstream-testsuite: script to run the testsuite.
++ + debian/tests/control: add the new test.
++ Thanks to Christian Kastner for crafting the patch. (Closes: #781996)
++ * Enable build on arm64 architecture.
++ + d/control: add arm64 to Architecture fields.
++ + d/rules: use TARGET=ARMV8 for arm64 arch.
++ + d/p/arm64.patch: new patch from upstream, to fix a build failure.
++ * Fix crash with illegal instruction on armhf with static libraries.
++ + d/p/arm-gcc-flags.patch: enforce -march=armv7-a and -mfpu=vfpv3-d16 flags.
++ * Add -lgfortran and -lpthread in .pc files for static linking.
++ * Ensure that the testsuite is run on arm* arches at build time.
++ + d/p/arm-arch-detection.patch: new patch, avoids false detection of
++ cross-compilation.
++ + d/p/disable-gemm3m-tests.patch: new patch, avoid compilation failure of
++ the testsuite.
++ + d/p/test-custom-package.patch renamed to d/p/always-run-testsuite.patch,
++ to clearly show that it is needed even for vanilla arm* packages.
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 29 Apr 2015 18:46:11 +0200
++
++openblas (0.2.12-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.12. (Closes: #765795)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 26 Oct 2014 10:42:29 +0100
++
++openblas (0.2.11-3) unstable; urgency=medium
++
++ [ Alastair McKinstry ]
++ * Add {blas,lapack}-openblas.pc files and symlinks via
++ update-alternatives. (Closes: #764491)
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 15 Oct 2014 21:54:50 +0200
++
++openblas (0.2.11-2) unstable; urgency=medium
++
++ * libopenblas-base: add dependency on libblas-common.
++ The goal is to make BLAS implementations multi-arch safe by preventing the
++ co-installability of, say, libblas3:amd64 and libatlas3-base:i386. See
++ * Bump Standards-Version to 3.9.6, no changes needed.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 27 Sep 2014 20:25:40 +0200
++
++openblas (0.2.11-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.11
++ * debian/copyright: reflect upstream changes.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 30 Aug 2014 14:20:55 +0200
++
++openblas (0.2.10-2) unstable; urgency=medium
++
++ * libopenblas-{base,dev}.prerm: fix removal of liblapack.so.3 alternative.
++ * debian/rules: pass the same make options to all make invocations.
++ Fixes FTBFS on armhf.
++ * Tighten build-dep on liblapack-pic.
++ Ensures that the LAPACK version used to compile OpenBLAS is as recent as
++ upstream embedded copy (including unreleased patches).
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 08 Aug 2014 14:25:37 +0200
++
++openblas (0.2.10-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.10
++ * Ship the optimized LAPACK as a new alternative.
++ + Use the binary from liblapack-pic for routines not overridden by
++ OpenBLAS.
++ As a consequence, add a Built-Using field to libopenblas-{base,dev}.
++ + libblas3-soname.patch: dropped patch.
++ + shared-blas-lapack.patch: new patch.
++ * Ship headers in /usr/include/openblas.
++ * Remove Sylvestre Ledru from Uploaders. Thanks Sylvestre for your work!
++ * debian/copyright: rewrite using machine-readable format.
++ * Use Files-Excluded from d/copyright to remove embedded LAPACK copy.
++ * no-embedded-lapack.patch: new patch.
++ Adapts build system for the absence of lapack-netlib/ directory.
++ * kfreebsd.patch: install shared library and link it against libm.
++ This patch also incorporates the former content of kfreebsd-soname.patch.
++ * Rewrite using debhelper and upstream's 'make install' rule.
++ * Update README.Debian.
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 05 Aug 2014 20:05:26 +0200
++
++openblas (0.2.9-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.9
++ * Remove patches applied upstream:
++ - dgemv-crash.patch
++ - fork-handler.patch
++ - qemu-athlon.patch
++ - wrong-parameter-for-zherk-zher2.patch
++ * Add armhf support.
++ - Use ARMv6 target. We cannot currently use the ARMv7 target, because it
++ requires VFPv3-D32 (and armhf only guarantees VFPv3-D16).
++ - arm-gcc-flags.patch: Remove arch-specific GCC flags.
++ * PowerPC: enforce a generic-enough target (PPCG4) for the generic package.
++ Previously, the target was (erroneously) selected based on the buildd
++ hardware.
++ * Update debian/orig-tar.sh: now keeps a quasi-empty lapack-netlib/TESTING
++ dir.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 15 Jun 2014 15:17:05 +0200
++
++openblas (0.2.8-6) unstable; urgency=medium
++
++ * Team upload.
++ * backport two fixes from upstream git:
++ - dgemv-crash.patch: fixes core2/barcelona dgemv kernel
++ - wrong-parameter-for-zherk-zher2.patch
++
++ -- Julian Taylor <jtaylor.debian@googlemail.com> Thu, 13 Mar 2014 20:03:07 +0100
++
++openblas (0.2.8-5) unstable; urgency=medium
++
++ * kfreebsd-soname.patch: give a SONAME to the shared library under kfreebsd,
++ by using the same stanza to create the shared object than under Linux.
++ Incidentally, this fixes the FTBFS on kfreebsd-* archs.
++ * Remove ia64, powerpcspe, hurd-i386 and sparc from the list of
++ supported architectures (the package never compiled on those).
++ * fork-handler.patch: improved version backported from upstream.
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 21 Feb 2014 18:07:32 +0100
++
++openblas (0.2.8-4) unstable; urgency=medium
++
++ * Revert to pthreads parallelism instead of OpenMP (Closes: #737675)
++ * remove-openmp-warning.patch: new patch, removes annoying warning when
++ OpenBLAS is called from an OpenMP application.
++ * fork-handler.patch: fixes hangs of OpenBLAS when called from a program
++ using OpenMP (Closes: #739331)
++ * Drop obsolete code in maintainer scripts to deal with the transition
++ libblas.so.3gf => libblas.so.3.
++ * Ship an additional libopenblas.so.0 in /usr/lib, to allow direct
++ linking to OpenBLAS, without using the alternatives system for BLAS
++ implementations. Thanks to Martin Koehler for his help in crafting a
++ proper solution. (Closes: #725673)
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 19 Feb 2014 17:20:03 +0100
++
++openblas (0.2.8-3) unstable; urgency=medium
++
++ * Use OpenMP parallelism instead of pthreads (Closes: #684344).
++ * Bump Standards-Version to 3.9.5, no changes needed.
++ * Bump to debhelper compat level 9.
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 15 Jan 2014 14:07:39 +0100
++
++openblas (0.2.8-2) unstable; urgency=low
++
++ * qemu-athlon.patch: new patch, should fix FTBFS on babin.debian.org
++ (which is a weird qemu guest declaring an Athlon CPU but without
++ 3dnow! extensions)
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 27 Aug 2013 18:04:04 +0200
++
++openblas (0.2.8-1) unstable; urgency=low
++
++ * New upstream release
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 03 Aug 2013 23:25:41 +0200
++
++openblas (0.2.7-1) unstable; urgency=low
++
++ * New upstream release
++ * power7.patch: remove patch, applied upstream
++ * Repackage upstream tarball without embedded LAPACK copy
++ * Package descriptions: mention that multiple arch is only for x86; fix typo
++ * Use canonical URLs for packaging VCS
++ * Add dependency of libopenblas-dev on libblas-dev, so that CBLAS headers are
++ installed. (Closes: #685890)
++ * Disable memory address range benchmarking (NO_WARMUP=1), for better
++ startup performance. (Closes: #709224)
++ * test-custom-package.patch: new package, ensures that testsuite is run even
++ when building a custom package. (Closes: #677866)
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 26 Jul 2013 18:37:41 +0200
++
++openblas (0.2.6-2) unstable; urgency=low
++
++ * power7.patch: new patch, should fix FTBFS on powerpc buildd with Power7 arch
++ * libblas3-soname.patch: new patch, sets the SONAME of the dynamic library to
++ libblas.so.3. (Closes: #687349)
++ * Put "libblas3 | libblas.so.3" in the shlibs of libopenblas-base.
++ Packages compiled with libopenblas-dev installed will now have a BLAS
++ dependency satisfiable by all BLAS flavours.
++ * Switch to git as VCS for packaging
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 20 May 2013 18:40:07 +0200
++
++openblas (0.2.6-1) unstable; urgency=low
++
++ * Upload to unstable
++ * Update Standards-Version to 3.9.4
++ * Increase the maximum number of threads to 64 when building the generic
++ package. At runtime, OpenBLAS will not use more threads than there are
++ available cores. (LP: #817212)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 02 Mar 2013 17:46:01 +0100
++
++openblas (0.2.6-1~exp1) experimental; urgency=low
++
++ * New upstream release
++ + Fixes use of uninitialized values in vectorized sgemv on i386.
++ (Closes: #696000)
++ + Fixes the overflowing buffer bug of gemv. (Closes: #697231)
++ + Fixes the the overflowing buffer bug of multithreading hbmv and sbmv.
++ (Closes: #697232)
++ + Fixes crash on 32-bit Athlon CPUs. (Closes: #697233)
++ + Better handling of unknown amd64 CPUs (e.g. within qemu).
++ (Closes: #697235)
++ * Disable processor affinity. (Closes: #684338)
++ * Force the maximum number of threads to 2 when building the generic package
++ (as we do for ATLAS). Otherwise, it is the number of cores on the build
++ machine which is chosen instead.
++ * README.Debian: improve instructions for building the custom package
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 02 Mar 2013 15:09:09 +0100
++
++openblas (0.2.5-1~exp1) experimental; urgency=low
++
++ [ Sébastien Villemot ]
++ * Update debian/watch
++ * Use my @debian.org email address
++ * Remove obsolete DM-Upload-Allowed flag
++
++ [ Sylvestre Ledru ]
++ * New upstream release
++ * generic_profile.diff removed (applied upstream)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 08 Dec 2012 16:24:30 +0100
++
++openblas (0.2.4-1~exp1) experimental; urgency=low
++
++ * New upstream release
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 15 Oct 2012 20:15:49 +0200
++
++openblas (0.2.3-1~exp1) experimental; urgency=low
++
++ * New upstream release
++ + Kills threads when unloading the library (Closes: #673061)
++
++ -- Sébastien Villemot <sebastien.villemot@ens.fr> Mon, 20 Aug 2012 12:18:07 +0000
++
++openblas (0.2.2-1~exp1) experimental; urgency=low
++
++ * New upstream release
++ * hurd.diff, hurd_gettid.diff, kfreebsd.diff, sparc.diff: remove patches,
++ applied upstream
++ * debian/rules: implement support for DEB_BUILD_OPTIONS=noopt
++
++ -- Sébastien Villemot <sebastien.villemot@ens.fr> Wed, 11 Jul 2012 16:32:27 +0000
++
++openblas (0.2.1-1~exp1) experimental; urgency=low
++
++ * New upstream release
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 02 Jul 2012 02:24:00 +0200
++
++openblas (0.1.1-5) unstable; urgency=low
++
++ * libopenblas-base.prerm: avoid crash if libblas.so.3gf already deleted
++ * Add myself to Uploaders
++ * Set DM-Upload-Allowed to yes
++
++ -- Sébastien Villemot <sebastien.villemot@ens.fr> Sun, 24 Jun 2012 16:15:11 +0000
++
++openblas (0.1.1-4) unstable; urgency=low
++
++ * Fix the FTBFS under KFreebsd. Thanks to Sébastien Villemot (Closes: #677165)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 13 Jun 2012 10:29:51 +0200
++
++openblas (0.1.1-3) unstable; urgency=low
++
++ * Upload in unstable
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 02 Jun 2012 17:33:58 +0200
++
++openblas (0.1.1-3~exp4) experimental; urgency=low
++
++ * Rollback previous upload
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 01 Jun 2012 11:04:51 +0200
++
++openblas (0.1.1-3~exp3) experimental; urgency=low
++
++ * Fix a bad alternative link to the old library name
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 01 Jun 2012 10:28:09 +0200
++
++openblas (0.1.1-3~exp2) experimental; urgency=low
++
++ * Fix FTBFS (Closes: #666277)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 30 May 2012 14:52:40 +0200
++
++openblas (0.1.1-3~exp1) experimental; urgency=low
++
++ * Replaces and Breaks updated against the right versions of other impacted
++ packages
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 21 May 2012 13:13:46 +0200
++
++openblas (0.1.1-2) experimental; urgency=low
++
++ * Moved removal from postinst to preinst
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 18 May 2012 15:58:32 +0200
++
++openblas (0.1.1-1) experimental; urgency=low
++
++ * New upstream release
++ * Remove libblas.so.3gf references before the install
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 14 May 2012 18:47:53 +0200
++
++openblas (0.1.0-1) experimental; urgency=low
++
++ * New upstream release
++ * Standards-Version updated to 3.9.3
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 04 Apr 2012 14:31:34 +0200
++
++openblas (0.1alpha2.5-1~exp2) experimental; urgency=low
++
++ * Join modifications with blas, lapack, atlas and openblas.
++ Declare the replacements of all *3gf blas & lapack implementation
++ (See bug #660607)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 20 Feb 2012 19:33:41 +0100
++
++openblas (0.1alpha2.5-1~exp1) experimental; urgency=low
++
++ * New upstream release
++ * Fix an upgrade issue (Closes: #659786)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 19 Feb 2012 15:50:41 +0100
++
++openblas (0.1alpha2.3-1~exp1) experimental; urgency=low
++
++ * New upstream release
++ Fix FTBFS under KfreeBSD (Closes: #635552)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 05 Sep 2011 15:24:24 +0200
++
++openblas (0.1alpha2.2-4~exp1) experimental; urgency=low
++
++ * Rename the reference libblas.so.3gf to libblas.so.3
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 03 Sep 2011 20:24:39 +0200
++
++openblas (0.1alpha2.2-3) unstable; urgency=low
++
++ * Same player try again: the lib has different names with build with the
++ dynamic arch or not.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 26 Jul 2011 18:40:04 +0200
++
++openblas (0.1alpha2.2-2) unstable; urgency=low
++
++ * Disable dynamic arch on non amd64 / i386 archs (Closes: #631887)
++ * Fix a FTBFS under hurd
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 26 Jul 2011 16:56:27 +0200
++
++openblas (0.1alpha2.2-1) unstable; urgency=low
++
++ * New upstream release (Closes: #631886)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 25 Jul 2011 10:46:44 +0200
++
++openblas (0.1alpha2.1-1) unstable; urgency=low
++
++ * New upstream release
++ * gfortran added a build dep
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 29 Jun 2011 21:18:48 +0200
++
++openblas (0.1alpha2-1) unstable; urgency=low
++
++ * New upstream release
++ * Good news: use DYNAMIC_ARCH=1 in the build option of OpenBLAS/Gotoblas
++ to support multiple architecture. All kernel will be included in the library
++ and dynamically switched the best architecture at run time.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 23 Jun 2011 10:44:43 +0200
++
++openblas (0.1alpha1-4) experimental; urgency=low
++
++ * Fix FTBFS under kfreebsd, sparc & hurd.
++ * Limit architectures to amd64 i386 ia64 powerpc powerpcspe ppc64
++ kfreebsd-i386 kfreebsd-amd64 hurd-i386 sparc
++ * cherry-pick from upstream to fail build when the arch is not supported
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 30 May 2011 17:05:23 +0200
++
++openblas (0.1alpha1-3) experimental; urgency=low
++
++ * clean target now really cleans everything. Thanks to Ryan Lovett
++ (Closes: #624253)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 04 May 2011 18:03:10 +0200
++
++openblas (0.1alpha1-2) experimental; urgency=low
++
++ * Update the README.Debian file
++ * watch file removed for now (it was the one from atlas)
++ * Fix a custom build issue (thanks to Ryan Lovett for the bug report)
++ * Fix a FTBFS under sparc
++ * Switch to dpkg-source 3.0 (quilt) format
++ * Standards-Version updated to version 3.9.2
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 16 Apr 2011 15:23:22 +0200
++
++openblas (0.1alpha1-1) experimental; urgency=low
++
++ * Initial version (Closes: #605456)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 04 Feb 2011 18:28:26 +0100
--- /dev/null
--- /dev/null
++Source: openblas
++Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
++Uploaders: Sébastien Villemot <sebastien@debian.org>,
++ Mo Zhou <lumin@debian.org>
++Section: devel
++Priority: optional
++Build-Depends: debhelper-compat (= 13),
++ debhelper (>= 12.8~),
++ gfortran,
++ liblapack-dev (>= 3.10.0-2~),
++ liblapack64-dev (>= 3.10.0-2~) [amd64 arm64 ppc64el ppc64 mips64el riscv64 sparc64 s390x loong64],
++Standards-Version: 4.6.2
++Vcs-Browser: https://salsa.debian.org/science-team/openblas
++Vcs-Git: https://salsa.debian.org/science-team/openblas.git
++Homepage: https://www.openblas.net/
++Rules-Requires-Root: no
++
++# 32-bit indexing version
++
++Package: libopenblas0
++Architecture: amd64 arm64 armhf i386 powerpc ppc64el ppc64 mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: metapackages
++Depends: ${misc:Depends},
++ libopenblas0-pthread | libopenblas0-openmp | libopenblas0-serial,
++Breaks: libblas3 (<< 3.7.1-2~),
++ liblapack3 (<< 3.7.1-2~),
++ libatlas3-base (<< 3.10.3-4~),
++ libopenblas-dev (<< 0.2.20+ds-3~)
++Description: Optimized BLAS (linear algebra) library (meta)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++
++Package: libopenblas0-pthread
++Architecture: amd64 arm64 armhf i386 powerpc ppc64el ppc64 mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: libs
++Depends: ${shlibs:Depends},
++ ${misc:Depends}
++Breaks: libblas3 (<< 3.7.1-2~),
++ liblapack3 (<< 3.7.1-2~),
++ libatlas3-base (<< 3.10.3-4~),
++ libopenblas-dev (<< 0.2.20+ds-3~)
++Provides: libblas.so.3,
++ liblapack.so.3
++Description: Optimized BLAS (linear algebra) library (shared lib, pthread)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ Configuration: USE_THREAD=1 USE_OPENMP=0 INTERFACE64=0
++
++Package: libopenblas0-openmp
++Architecture: amd64 arm64 armhf i386 powerpc ppc64el ppc64 mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: libs
++Depends: ${shlibs:Depends},
++ ${misc:Depends}
++Breaks: libblas3 (<< 3.7.1-2~),
++ liblapack3 (<< 3.7.1-2~),
++ libatlas3-base (<< 3.10.3-4~),
++ libopenblas-dev (<< 0.2.20+ds-3~)
++Provides: libblas.so.3,
++ liblapack.so.3
++Description: Optimized BLAS (linear algebra) library (shared lib, openmp)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ Configuration: USE_THREAD=1 USE_OPENMP=1 INTERFACE64=0
++
++Package: libopenblas0-serial
++Architecture: amd64 arm64 armhf i386 powerpc ppc64el ppc64 mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: libs
++Depends: ${shlibs:Depends},
++ ${misc:Depends}
++Breaks: libblas3 (<< 3.7.1-2~),
++ liblapack3 (<< 3.7.1-2~),
++ libatlas3-base (<< 3.10.3-4~),
++ libopenblas-dev (<< 0.2.20+ds-3~)
++Provides: libblas.so.3,
++ liblapack.so.3
++Description: Optimized BLAS (linear algebra) library (shared lib, serial)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ Configuration: USE_THREAD=0 USE_OPENMP=0 INTERFACE64=0
++
++Package: libopenblas-dev
++Architecture: amd64 arm64 armhf i386 powerpc ppc64el ppc64 mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: metapackages
++Depends: libopenblas0 (= ${binary:Version}),
++ ${misc:Depends},
++ libopenblas-pthread-dev | libopenblas-openmp-dev | libopenblas-serial-dev,
++Breaks: libblas-dev (<< 3.7.1-2~),
++ liblapack-dev (<< 3.7.1-2~),
++ libatlas-base-dev (<< 3.10.3-4~)
++Description: Optimized BLAS (linear algebra) library (dev, meta)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ This package includes the static libraries and symbolic links
++ needed for program development.
++
++Package: libopenblas-pthread-dev
++Architecture: amd64 arm64 armhf i386 powerpc ppc64el ppc64 mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: libdevel
++Depends: libopenblas0-pthread (= ${binary:Version}),
++ ${misc:Depends}
++Breaks: libblas-dev (<< 3.7.1-2~),
++ liblapack-dev (<< 3.7.1-2~),
++ libatlas-base-dev (<< 3.10.3-4~)
++Provides: libblas.so,
++ liblapack.so
++Description: Optimized BLAS (linear algebra) library (dev, pthread)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ This package includes the static libraries and symbolic links
++ needed for program development.
++ .
++ Configuration: USE_THREAD=1 USE_OPENMP=0 INTERFACE64=0
++
++Package: libopenblas-openmp-dev
++Architecture: amd64 arm64 armhf i386 powerpc ppc64el ppc64 mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: libdevel
++Depends: libopenblas0-openmp (= ${binary:Version}),
++ ${misc:Depends}
++Breaks: libblas-dev (<< 3.7.1-2~),
++ liblapack-dev (<< 3.7.1-2~),
++ libatlas-base-dev (<< 3.10.3-4~)
++Provides: libblas.so,
++ liblapack.so
++Description: Optimized BLAS (linear algebra) library (dev, openmp)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ This package includes the static libraries and symbolic links
++ needed for program development.
++ .
++ Configuration: USE_THREAD=1 USE_OPENMP=1 INTERFACE64=0
++
++Package: libopenblas-serial-dev
++Architecture: amd64 arm64 armhf i386 powerpc ppc64el ppc64 mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: libdevel
++Depends: libopenblas0-serial (= ${binary:Version}),
++ ${misc:Depends}
++Breaks: libblas-dev (<< 3.7.1-2~),
++ liblapack-dev (<< 3.7.1-2~),
++ libatlas-base-dev (<< 3.10.3-4~)
++Provides: libblas.so,
++ liblapack.so
++Description: Optimized BLAS (linear algebra) library (dev, serial)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ This package includes the static libraries and symbolic links
++ needed for program development.
++ .
++ Configuration: USE_THREAD=0 USE_OPENMP=0 INTERFACE64=0
++
++# 64-bit indexing version
++
++Package: libopenblas64-0
++Architecture: amd64 arm64 ppc64 ppc64el mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: metapackages
++Depends: ${misc:Depends},
++ libopenblas64-0-pthread | libopenblas64-0-openmp | libopenblas64-0-serial,
++Description: Optimized BLAS (linear algebra) library (shared lib, 64bit, meta)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ This metapackage provides a 64-bit indexing version.
++
++Package: libopenblas64-0-pthread
++Architecture: amd64 arm64 ppc64 ppc64el mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: libs
++Depends: ${shlibs:Depends},
++ ${misc:Depends}
++Provides: libblas64.so.3,
++ liblapack64.so.3
++Description: Optimized BLAS (linear algebra) library (shared lib, 64bit, pthread)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ Configuration: USE_THREAD=1 USE_OPENMP=0 INTERFACE64=1
++
++Package: libopenblas64-0-openmp
++Architecture: amd64 arm64 ppc64 ppc64el mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: libs
++Depends: ${shlibs:Depends},
++ ${misc:Depends}
++Provides: libblas64.so.3,
++ liblapack64.so.3
++Description: Optimized BLAS (linear algebra) library (shared lib, 64bit, openmp)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ Configuration: USE_THREAD=1 USE_OPENMP=1 INTERFACE64=1
++
++Package: libopenblas64-0-serial
++Architecture: amd64 arm64 ppc64 ppc64el mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: libs
++Depends: ${shlibs:Depends},
++ ${misc:Depends}
++Provides: libblas64.so.3,
++ liblapack64.so.3
++Description: Optimized BLAS (linear algebra) library (shared lib, 64bit, serial)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ Configuration: USE_THREAD=0 USE_OPENMP=0 INTERFACE64=1
++
++Package: libopenblas64-dev
++Architecture: amd64 arm64 ppc64 ppc64el mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: metapackages
++Depends: libopenblas64-0 (= ${binary:Version}),
++ ${misc:Depends},
++ libopenblas64-pthread-dev | libopenblas64-openmp-dev | libopenblas64-serial-dev,
++Description: Optimized BLAS (linear algebra) library (dev, 64bit, meta)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ This package includes the static libraries and symbolic links
++ needed for program development.
++ .
++ This metapackage provides a 64-bit indexing version.
++
++Package: libopenblas64-pthread-dev
++Architecture: amd64 arm64 ppc64 ppc64el mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: libdevel
++Depends: libopenblas64-0-pthread (= ${binary:Version}),
++ ${misc:Depends}
++Provides: libblas64.so,
++ liblapack64.so
++Description: Optimized BLAS (linear algebra) library (dev, 64bit, pthread)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ This package includes the static libraries and symbolic links
++ needed for program development.
++ .
++ Configuration: USE_THREAD=1 USE_OPENMP=0 INTERFACE64=1
++
++Package: libopenblas64-openmp-dev
++Architecture: amd64 arm64 ppc64 ppc64el mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: libdevel
++Depends: libopenblas64-0-openmp (= ${binary:Version}),
++ ${misc:Depends}
++Provides: libblas64.so,
++ liblapack64.so
++Description: Optimized BLAS (linear algebra) library (dev, 64bit, openmp)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ This package includes the static libraries and symbolic links
++ needed for program development.
++ .
++ Configuration: USE_THREAD=1 USE_OPENMP=1 INTERFACE64=1
++
++Package: libopenblas64-serial-dev
++Architecture: amd64 arm64 ppc64 ppc64el mips64el riscv64 sparc64 s390x loong64
++Multi-Arch: same
++Section: libdevel
++Depends: libopenblas64-0-serial (= ${binary:Version}),
++ ${misc:Depends}
++Provides: libblas64.so,
++ liblapack64.so
++Description: Optimized BLAS (linear algebra) library (dev, 64bit, serial)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ On amd64, arm64, i386, loong64, ppc64el and s390x, all kernels are included in
++ the library and the one matching best your processor is selected at runtime.
++ .
++ On other architectures, for maximum performance, you may want to rebuild
++ OpenBLAS locally, see the section: “Building an optimized OpenBLAS package for
++ your machine” in README.Debian.
++ .
++ This package includes the static libraries and symbolic links
++ needed for program development.
++ .
++ Configuration: USE_THREAD=0 USE_OPENMP=0 INTERFACE64=1
--- /dev/null
--- /dev/null
++Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
++Upstream-Name: OpenBLAS
++Upstream-Contact: Zhang Xianyi <traits.zhang@gmail.com>
++Source: https://github.com/xianyi/OpenBLAS
++Files-Excluded: lapack-netlib/*
++ relapack/*
++
++Files: *
++Copyright: 2011-2023 The OpenBLAS Project
++ 2009-2010 The University of Texas at Austin
++ 2013 Martin Koehler, grisuthedragon@users.github.com
++ 2020 IBM Corporation
++ 2022 Arm Ltd
++License: BSD-3-clause
++ Redistribution and use in source and binary forms, with or without
++ modification, are permitted provided that the following conditions are
++ met:
++ .
++ 1. Redistributions of source code must retain the above copyright
++ notice, this list of conditions and the following disclaimer.
++ .
++ 2. Redistributions in binary form must reproduce the above copyright
++ notice, this list of conditions and the following disclaimer in
++ the documentation and/or other materials provided with the
++ distribution.
++ 3. Neither the name of the OpenBLAS project nor the names of
++ its contributors may be used to endorse or promote products
++ derived from this software without specific prior written
++ permission.
++ .
++ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
++ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
++ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
++ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
++ OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++
++Files: benchmark/cholesky.c
++ benchmark/linpack.c
++ benchmark/geev.c
++ benchmark/getri.c
++ benchmark/gesv.c
++ benchmark/potrf.c
++ common.h
++ common_alpha.h
++ common_ia64.h
++ common_interface.h
++ common_lapack.h
++ common_level1.h
++ common_level2.h
++ common_level3.h
++ common_linux.h
++ common_macro.h
++ common_param.h
++ common_power.h
++ common_sparc.h
++ common_thread.h
++ common_x86.h
++ common_x86_64.h
++ cpuid.h
++ cpuid_alpha.c
++ cpuid_ia64.c
++ cpuid_power.c
++ cpuid_sparc.c
++ cpuid_x86.c
++ driver/level2/gbmv_k.c
++ driver/level2/gbmv_thread.c
++ driver/level2/gemv_thread.c
++ driver/level2/ger_thread.c
++ driver/level2/sbgemv_thread.c
++ driver/level2/sbmv_k.c
++ driver/level2/sbmv_thread.c
++ driver/level2/spmv_k.c
++ driver/level2/spmv_thread.c
++ driver/level2/spr2_k.c
++ driver/level2/spr2_thread.c
++ driver/level2/spr_k.c
++ driver/level2/spr_thread.c
++ driver/level2/symv_thread.c
++ driver/level2/syr2_k.c
++ driver/level2/syr2_thread.c
++ driver/level2/syr_k.c
++ driver/level2/syr_thread.c
++ driver/level2/tbmv_L.c
++ driver/level2/tbmv_U.c
++ driver/level2/tbmv_thread.c
++ driver/level2/tbsv_L.c
++ driver/level2/tbsv_U.c
++ driver/level2/tpmv_L.c
++ driver/level2/tpmv_U.c
++ driver/level2/tpmv_thread.c
++ driver/level2/tpsv_L.c
++ driver/level2/tpsv_U.c
++ driver/level2/trmv_L.c
++ driver/level2/trmv_U.c
++ driver/level2/trmv_thread.c
++ driver/level2/trsv_L.c
++ driver/level2/trsv_U.c
++ driver/level2/zgbmv_k.c
++ driver/level2/zhbmv_k.c
++ driver/level2/zher2_k.c
++ driver/level2/zher_k.c
++ driver/level2/zhpmv_k.c
++ driver/level2/zhpr2_k.c
++ driver/level2/zhpr_k.c
++ driver/level2/zsbmv_k.c
++ driver/level2/zspmv_k.c
++ driver/level2/zspr2_k.c
++ driver/level2/zspr_k.c
++ driver/level2/zsyr2_k.c
++ driver/level2/zsyr_k.c
++ driver/level2/ztbmv_L.c
++ driver/level2/ztbmv_U.c
++ driver/level2/ztbsv_L.c
++ driver/level2/ztbsv_U.c
++ driver/level2/ztpmv_L.c
++ driver/level2/ztpmv_U.c
++ driver/level2/ztpsv_L.c
++ driver/level2/ztpsv_U.c
++ driver/level2/ztrmv_L.c
++ driver/level2/ztrmv_U.c
++ driver/level2/ztrsv_L.c
++ driver/level2/ztrsv_U.c
++ driver/level3/gemm.c
++ driver/level3/gemm3m.c
++ driver/level3/gemm3m_level3.c
++ driver/level3/gemm_thread_m.c
++ driver/level3/gemm_thread_mn.c
++ driver/level3/gemm_thread_n.c
++ driver/level3/gemm_thread_variable.c
++ driver/level3/hemm3m_k.c
++ driver/level3/level3.c
++ driver/level3/level3_gemm3m_thread.c
++ driver/level3/level3_syrk.c
++ driver/level3/level3_syr2k.c
++ driver/level3/level3_syrk_threaded.c
++ driver/level3/level3_thread.c
++ driver/level3/symm_k.c
++ driver/level3/syr2k_k.c
++ driver/level3/syr2k_kernel.c
++ driver/level3/syrk_k.c
++ driver/level3/syrk_kernel.c
++ driver/level3/syrk_thread.c
++ driver/level3/trmm_L.c
++ driver/level3/trmm_R.c
++ driver/level3/trsm_L.c
++ driver/level3/trsm_R.c
++ driver/level3/zhemm_k.c
++ driver/level3/zher2k_k.c
++ driver/level3/zher2k_kernel.c
++ driver/level3/zherk_beta.c
++ driver/level3/zherk_k.c
++ driver/level3/zherk_kernel.c
++ driver/level3/zsyrk_beta.c
++ driver/level3/symm3m_k.c
++ driver/mapper/mapper.c
++ driver/others/abs.c
++ driver/others/blas_l1_thread.c
++ driver/others/blas_server_omp.c
++ driver/others/blas_server_win32.c
++ driver/others/divtable.c
++ driver/others/dynamic.c
++ driver/others/dynamic_arm64.c
++ driver/others/lamc3.c
++ driver/others/lamch.c
++ driver/others/lsame.c
++ driver/others/memory_qalloc.c
++ driver/others/parameter.c
++ driver/others/profile.c
++ driver/others/xerbla.c
++ exports/dllinit.c
++ interface/asum.c
++ interface/axpy.c
++ interface/copy.c
++ interface/dot.c
++ interface/dsdot.c
++ interface/gbmv.c
++ interface/geadd.c
++ interface/gemm.c
++ interface/gemv.c
++ interface/ger.c
++ interface/imax.c
++ interface/lapack/gesv.c
++ interface/lapack/getf2.c
++ interface/lapack/getrf.c
++ interface/lapack/getrs.c
++ interface/lapack/laswp.c
++ interface/lapack/lauu2.c
++ interface/lapack/lauum.c
++ interface/lapack/potf2.c
++ interface/lapack/potrf.c
++ interface/lapack/potri.c
++ interface/lapack/trti2.c
++ interface/lapack/trtri.c
++ interface/lapack/trtrs.c
++ interface/lapack/zgetf2.c
++ interface/lapack/zgetrf.c
++ interface/lapack/zgetrs.c
++ interface/lapack/zlaswp.c
++ interface/lapack/zlauu2.c
++ interface/lapack/zlauum.c
++ interface/lapack/zpotf2.c
++ interface/lapack/zpotrf.c
++ interface/lapack/zpotri.c
++ interface/lapack/ztrti2.c
++ interface/lapack/ztrtri.c
++ interface/lapack/ztrtrs.c
++ interface/max.c
++ interface/nrm2.c
++ interface/rot.c
++ interface/sbgemv.c
++ interface/sbmv.c
++ interface/scal.c
++ interface/sdsdot.c
++ interface/spmv.c
++ interface/spr.c
++ interface/spr2.c
++ interface/swap.c
++ interface/symm.c
++ interface/symv.c
++ interface/syr.c
++ interface/syr2.c
++ interface/syr2k.c
++ interface/syrk.c
++ interface/tbmv.c
++ interface/tbsv.c
++ interface/tpmv.c
++ interface/tpsv.c
++ interface/trmv.c
++ interface/trsm.c
++ interface/trsv.c
++ interface/zaxpy.c
++ interface/zdot.c
++ interface/zgbmv.c
++ interface/zgeadd.c
++ interface/zgemv.c
++ interface/zger.c
++ interface/zhbmv.c
++ interface/zhemv.c
++ interface/zher.c
++ interface/zher2.c
++ interface/zhpmv.c
++ interface/zhpr.c
++ interface/zhpr2.c
++ interface/zrot.c
++ interface/zsbmv.c
++ interface/zscal.c
++ interface/zspmv.c
++ interface/zspr.c
++ interface/zspr2.c
++ interface/zswap.c
++ interface/zsymv.c
++ interface/zsyr.c
++ interface/zsyr2.c
++ interface/ztbmv.c
++ interface/ztbsv.c
++ interface/ztpmv.c
++ interface/ztpsv.c
++ interface/ztrmv.c
++ interface/ztrsv.c
++ kernel/arm64/cgemm_ncopy_sve_v1.c
++ kernel/arm64/cgemm_tcopy_sve_v1.c
++ kernel/arm64/symm_lcopy_sve.c
++ kernel/arm64/symm_ucopy_sve.c
++ kernel/arm64/trmm_lncopy_sve_v1.c
++ kernel/arm64/trmm_ltcopy_sve_v1.c
++ kernel/arm64/trmm_uncopy_sve_v1.c
++ kernel/arm64/trmm_utcopy_sve_v1.c
++ kernel/arm64/trsm_kernel_LN_sve.c
++ kernel/arm64/trsm_kernel_LT_sve.c
++ kernel/arm64/trsm_kernel_RN_sve.c
++ kernel/arm64/trsm_kernel_RT_sve.c
++ kernel/arm64/trsm_lncopy_sve.c
++ kernel/arm64/trsm_ltcopy_sve.c
++ kernel/arm64/trsm_uncopy_sve.c
++ kernel/arm64/trsm_utcopy_sve.c
++ kernel/arm64/zgemm_ncopy_sve_v1.c
++ kernel/arm64/zgemm_tcopy_sve_v1.c
++ kernel/arm64/zhemm_ltcopy_sve.c
++ kernel/arm64/zhemm_utcopy_sve.c
++ kernel/arm64/zsymm_lcopy_sve.c
++ kernel/arm64/zsymm_ucopy_sve.c
++ kernel/arm64/ztrmm_lncopy_sve_v1.c
++ kernel/arm64/ztrmm_ltcopy_sve_v1.c
++ kernel/arm64/ztrmm_uncopy_sve_v1.c
++ kernel/arm64/ztrmm_utcopy_sve_v1.c
++ kernel/arm64/ztrsm_lncopy_sve.c
++ kernel/arm64/ztrsm_ltcopy_sve.c
++ kernel/arm64/ztrsm_uncopy_sve.c
++ kernel/arm64/ztrsm_utcopy_sve.c
++ kernel/generic/cabs.c
++ kernel/generic/gemm_beta.c
++ kernel/generic/gemm_ncopy_1.c
++ kernel/generic/gemm_ncopy_16.c
++ kernel/generic/gemm_ncopy_2.c
++ kernel/generic/gemm_ncopy_4.c
++ kernel/generic/gemm_ncopy_6.c
++ kernel/generic/gemm_ncopy_8.c
++ kernel/generic/gemm_tcopy_1.c
++ kernel/generic/gemm_tcopy_16.c
++ kernel/generic/gemm_tcopy_2.c
++ kernel/generic/gemm_tcopy_4.c
++ kernel/generic/gemm_tcopy_6.c
++ kernel/generic/gemm_tcopy_8.c
++ kernel/generic/ger.c
++ kernel/generic/laswp_ncopy_1.c
++ kernel/generic/laswp_ncopy_2.c
++ kernel/generic/laswp_ncopy_4.c
++ kernel/generic/laswp_ncopy_8.c
++ kernel/generic/lsame.c
++ kernel/generic/neg_tcopy_1.c
++ kernel/generic/neg_tcopy_16.c
++ kernel/generic/neg_tcopy_2.c
++ kernel/generic/neg_tcopy_4.c
++ kernel/generic/neg_tcopy_8.c
++ kernel/generic/symm_lcopy_1.c
++ kernel/generic/symm_lcopy_16.c
++ kernel/generic/symm_lcopy_2.c
++ kernel/generic/symm_lcopy_4.c
++ kernel/generic/symm_lcopy_6.c
++ kernel/generic/symm_lcopy_8.c
++ kernel/generic/symm_ucopy_1.c
++ kernel/generic/symm_ucopy_16.c
++ kernel/generic/symm_ucopy_2.c
++ kernel/generic/symm_ucopy_4.c
++ kernel/generic/symm_ucopy_6.c
++ kernel/generic/symm_ucopy_8.c
++ kernel/generic/symv_k.c
++ kernel/generic/trmm_lncopy_1.c
++ kernel/generic/trmm_lncopy_16.c
++ kernel/generic/trmm_lncopy_2.c
++ kernel/generic/trmm_lncopy_4.c
++ kernel/generic/trmm_lncopy_6.c
++ kernel/generic/trmm_lncopy_8.c
++ kernel/generic/trmm_ltcopy_1.c
++ kernel/generic/trmm_ltcopy_16.c
++ kernel/generic/trmm_ltcopy_2.c
++ kernel/generic/trmm_ltcopy_4.c
++ kernel/generic/trmm_ltcopy_6.c
++ kernel/generic/trmm_ltcopy_8.c
++ kernel/generic/trmm_uncopy_1.c
++ kernel/generic/trmm_uncopy_16.c
++ kernel/generic/trmm_uncopy_2.c
++ kernel/generic/trmm_uncopy_4.c
++ kernel/generic/trmm_uncopy_6.c
++ kernel/generic/trmm_uncopy_8.c
++ kernel/generic/trmm_utcopy_1.c
++ kernel/generic/trmm_utcopy_16.c
++ kernel/generic/trmm_utcopy_2.c
++ kernel/generic/trmm_utcopy_4.c
++ kernel/generic/trmm_utcopy_6.c
++ kernel/generic/trmm_utcopy_8.c
++ kernel/generic/trsm_kernel_LN.c
++ kernel/generic/trsm_kernel_LT.c
++ kernel/generic/trsm_kernel_RN.c
++ kernel/generic/trsm_kernel_RT.c
++ kernel/generic/trsm_lncopy_1.c
++ kernel/generic/trsm_lncopy_16.c
++ kernel/generic/trsm_lncopy_2.c
++ kernel/generic/trsm_lncopy_4.c
++ kernel/generic/trsm_lncopy_6.c
++ kernel/generic/trsm_lncopy_8.c
++ kernel/generic/trsm_ltcopy_1.c
++ kernel/generic/trsm_ltcopy_16.c
++ kernel/generic/trsm_ltcopy_2.c
++ kernel/generic/trsm_ltcopy_4.c
++ kernel/generic/trsm_ltcopy_6.c
++ kernel/generic/trsm_ltcopy_8.c
++ kernel/generic/trsm_uncopy_1.c
++ kernel/generic/trsm_uncopy_16.c
++ kernel/generic/trsm_uncopy_2.c
++ kernel/generic/trsm_uncopy_4.c
++ kernel/generic/trsm_uncopy_6.c
++ kernel/generic/trsm_uncopy_8.c
++ kernel/generic/trsm_utcopy_1.c
++ kernel/generic/trsm_utcopy_16.c
++ kernel/generic/trsm_utcopy_2.c
++ kernel/generic/trsm_utcopy_4.c
++ kernel/generic/trsm_utcopy_6.c
++ kernel/generic/trsm_utcopy_8.c
++ kernel/generic/zgemm3m_ncopy_1.c
++ kernel/generic/zgemm3m_ncopy_2.c
++ kernel/generic/zgemm3m_ncopy_4.c
++ kernel/generic/zgemm3m_ncopy_8.c
++ kernel/generic/zgemm3m_tcopy_1.c
++ kernel/generic/zgemm3m_tcopy_2.c
++ kernel/generic/zgemm3m_tcopy_4.c
++ kernel/generic/zgemm3m_tcopy_8.c
++ kernel/generic/zgemm_beta.c
++ kernel/generic/zgemm_ncopy_1.c
++ kernel/generic/zgemm_ncopy_2.c
++ kernel/generic/zgemm_ncopy_4.c
++ kernel/generic/zgemm_ncopy_8.c
++ kernel/generic/zgemm_tcopy_1.c
++ kernel/generic/zgemm_tcopy_2.c
++ kernel/generic/zgemm_tcopy_4.c
++ kernel/generic/zgemm_tcopy_8.c
++ kernel/generic/zger.c
++ kernel/generic/zhemm3m_lcopy_1.c
++ kernel/generic/zhemm3m_lcopy_2.c
++ kernel/generic/zhemm3m_lcopy_4.c
++ kernel/generic/zhemm3m_lcopy_8.c
++ kernel/generic/zhemm3m_ucopy_1.c
++ kernel/generic/zhemm3m_ucopy_2.c
++ kernel/generic/zhemm3m_ucopy_4.c
++ kernel/generic/zhemm3m_ucopy_8.c
++ kernel/generic/zhemm_ltcopy_1.c
++ kernel/generic/zhemm_ltcopy_2.c
++ kernel/generic/zhemm_ltcopy_4.c
++ kernel/generic/zhemm_ltcopy_8.c
++ kernel/generic/zhemm_utcopy_1.c
++ kernel/generic/zhemm_utcopy_2.c
++ kernel/generic/zhemm_utcopy_4.c
++ kernel/generic/zhemm_utcopy_8.c
++ kernel/generic/zhemv_k.c
++ kernel/generic/zlaswp_ncopy_1.c
++ kernel/generic/zlaswp_ncopy_2.c
++ kernel/generic/zlaswp_ncopy_4.c
++ kernel/generic/zneg_tcopy_1.c
++ kernel/generic/zneg_tcopy_2.c
++ kernel/generic/zneg_tcopy_4.c
++ kernel/generic/zneg_tcopy_8.c
++ kernel/generic/zsymm3m_lcopy_1.c
++ kernel/generic/zsymm3m_lcopy_2.c
++ kernel/generic/zsymm3m_lcopy_4.c
++ kernel/generic/zsymm3m_lcopy_8.c
++ kernel/generic/zsymm3m_ucopy_1.c
++ kernel/generic/zsymm3m_ucopy_2.c
++ kernel/generic/zsymm3m_ucopy_4.c
++ kernel/generic/zsymm3m_ucopy_8.c
++ kernel/generic/zsymm_lcopy_1.c
++ kernel/generic/zsymm_lcopy_2.c
++ kernel/generic/zsymm_lcopy_4.c
++ kernel/generic/zsymm_lcopy_8.c
++ kernel/generic/zsymm_ucopy_1.c
++ kernel/generic/zsymm_ucopy_2.c
++ kernel/generic/zsymm_ucopy_4.c
++ kernel/generic/zsymm_ucopy_8.c
++ kernel/generic/zsymv_k.c
++ kernel/generic/ztrmm_lncopy_1.c
++ kernel/generic/ztrmm_lncopy_2.c
++ kernel/generic/ztrmm_lncopy_4.c
++ kernel/generic/ztrmm_lncopy_8.c
++ kernel/generic/ztrmm_ltcopy_1.c
++ kernel/generic/ztrmm_ltcopy_2.c
++ kernel/generic/ztrmm_ltcopy_4.c
++ kernel/generic/ztrmm_ltcopy_8.c
++ kernel/generic/ztrmm_uncopy_1.c
++ kernel/generic/ztrmm_uncopy_2.c
++ kernel/generic/ztrmm_uncopy_4.c
++ kernel/generic/ztrmm_uncopy_8.c
++ kernel/generic/ztrmm_utcopy_1.c
++ kernel/generic/ztrmm_utcopy_2.c
++ kernel/generic/ztrmm_utcopy_4.c
++ kernel/generic/ztrmm_utcopy_8.c
++ kernel/generic/ztrsm_lncopy_1.c
++ kernel/generic/ztrsm_lncopy_2.c
++ kernel/generic/ztrsm_lncopy_4.c
++ kernel/generic/ztrsm_lncopy_8.c
++ kernel/generic/ztrsm_ltcopy_1.c
++ kernel/generic/ztrsm_ltcopy_2.c
++ kernel/generic/ztrsm_ltcopy_4.c
++ kernel/generic/ztrsm_ltcopy_8.c
++ kernel/generic/ztrsm_uncopy_1.c
++ kernel/generic/ztrsm_uncopy_2.c
++ kernel/generic/ztrsm_uncopy_4.c
++ kernel/generic/ztrsm_uncopy_8.c
++ kernel/generic/ztrsm_utcopy_1.c
++ kernel/generic/ztrsm_utcopy_2.c
++ kernel/generic/ztrsm_utcopy_4.c
++ kernel/generic/ztrsm_utcopy_8.c
++ kernel/power/lock.c
++ kernel/power/dgemm_ncopy_8_power10.c
++ kernel/power/sbgemm_ncopy_16_power10.c
++ kernel/power/sbgemm_ncopy_8_power10.c
++ kernel/power/sbgemm_tcopy_16_power10.c
++ kernel/power/sbgemm_tcopy_8_power10.c
++ kernel/power/trsm_kernel_LN_power10.c
++ kernel/power/trsm_kernel_LT_power10.c
++ kernel/power/trsm_kernel_RN_power10.c
++ kernel/power/trsm_kernel_RT_power10.c
++ kernel/setparam-ref.c
++ kernel/x86_64/dger.c
++ kernel/x86_64/sger.c
++ kernel/x86_64/ctrsm_kernel_LN_bulldozer.c
++ kernel/x86_64/ctrsm_kernel_LT_bulldozer.c
++ kernel/x86_64/ctrsm_kernel_RN_bulldozer.c
++ kernel/x86_64/ctrsm_kernel_RT_bulldozer.c
++ kernel/x86_64/dgemm_beta_skylakex.c
++ kernel/x86_64/dgemm_kernel_16x2_skylakex.S
++ kernel/x86_64/dgemm_ncopy_8_skylakex.c
++ kernel/x86_64/dgemm_tcopy_8_skylakex.c
++ kernel/x86_64/dtrsm_kernel_LN_bulldozer.c
++ kernel/x86_64/dtrsm_kernel_RN_haswell.c
++ kernel/x86_64/dtrsm_kernel_RT_bulldozer.c
++ kernel/x86_64/sgemm_beta_skylakex.c
++ kernel/x86_64/sgemm_ncopy_4_skylakex.c
++ kernel/x86_64/sgemm_tcopy_16_skylakex.c
++ kernel/x86_64/strsm_kernel_LN_bulldozer.c
++ kernel/x86_64/strsm_kernel_LT_bulldozer.c
++ kernel/x86_64/strsm_kernel_RN_bulldozer.c
++ kernel/x86_64/strsm_kernel_RT_bulldozer.c
++ kernel/x86_64/ztrsm_kernel_LN_bulldozer.c
++ kernel/x86_64/ztrsm_kernel_LT_bulldozer.c
++ kernel/x86_64/ztrsm_kernel_RN_bulldozer.c
++ kernel/x86_64/ztrsm_kernel_RT_bulldozer.c
++ lapack/getf2/getf2_k.c
++ lapack/getf2/zgetf2_k.c
++ lapack/getrf/getrf_parallel.c
++ lapack/getrf/getrf_parallel_omp.c
++ lapack/getrf/getrf_single.c
++ lapack/getrs/getrs_parallel.c
++ lapack/getrs/getrs_single.c
++ lapack/getrs/zgetrs_parallel.c
++ lapack/getrs/zgetrs_single.c
++ lapack/laswp/generic/laswp_k.c
++ lapack/laswp/generic/laswp_k_1.c
++ lapack/laswp/generic/laswp_k_2.c
++ lapack/laswp/generic/laswp_k_4.c
++ lapack/laswp/generic/laswp_k_8.c
++ lapack/laswp/generic/zlaswp_k.c
++ lapack/laswp/generic/zlaswp_k_1.c
++ lapack/laswp/generic/zlaswp_k_2.c
++ lapack/laswp/generic/zlaswp_k_4.c
++ lapack/lauu2/lauu2_L.c
++ lapack/lauu2/lauu2_U.c
++ lapack/lauu2/zlauu2_L.c
++ lapack/lauu2/zlauu2_U.c
++ lapack/lauum/lauum_L_parallel.c
++ lapack/lauum/lauum_L_single.c
++ lapack/lauum/lauum_U_parallel.c
++ lapack/lauum/lauum_U_single.c
++ lapack/potf2/potf2_L.c
++ lapack/potf2/potf2_U.c
++ lapack/potf2/zpotf2_L.c
++ lapack/potf2/zpotf2_U.c
++ lapack/potrf/potrf_L_parallel.c
++ lapack/potrf/potrf_L_single.c
++ lapack/potrf/potrf_U_parallel.c
++ lapack/potrf/potrf_U_single.c
++ lapack/potrf/potrf_parallel.c
++ lapack/trti2/trti2_L.c
++ lapack/trti2/trti2_U.c
++ lapack/trti2/ztrti2_L.c
++ lapack/trti2/ztrti2_U.c
++ lapack/trtri/trtri_L_parallel.c
++ lapack/trtri/trtri_U_parallel.c
++ lapack/trtrs/trtrs_parallel.c
++ lapack/trtrs/trtrs_single.c
++ lapack/trtrs/ztrtrs_parallel.c
++ lapack/trtrs/ztrtrs_single.c
++ symcopy.h
++Copyright: 2009-2010 The University of Texas at Austin
++ 2023 The OpenBLAS Project
++License: BSD-2-clause-texas
++ 1. Redistributions of source code must retain the above
++ copyright notice, this list of conditions and the following
++ disclaimer.
++ .
++ 2. Redistributions in binary form must reproduce the above
++ copyright notice, this list of conditions and the following
++ disclaimer in the documentation and/or other materials
++ provided with the distribution.
++ .
++ THIS SOFTWARE IS PROVIDED BY THE UNIVERSITY OF TEXAS AT
++ AUSTIN ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
++ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
++ DISCLAIMED. IN NO EVENT SHALL THE UNIVERSITY OF TEXAS AT
++ AUSTIN OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
++ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
++ GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
++ BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
++ OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
++ POSSIBILITY OF SUCH DAMAGE.
++ .
++ The views and conclusions contained in the software and
++ documentation are those of the authors and should not be
++ interpreted as representing official policies, either expressed
++ or implied, of The University of Texas at Austin.
++
++Files: ctest/* reference/* test/*
++Copyright: none
++License: public-domain
++ These files come from netlib.org and are in the public domain.
++
++Files: utest/ctest.h
++Copyright: 2011-2016 Bas van den Berg
++License: Apache-2.0
++ Licensed under the Apache License, Version 2.0 (the "License");
++ you may not use this file except in compliance with the License.
++ You may obtain a copy of the License at
++ .
++ http://www.apache.org/licenses/LICENSE-2.0
++ .
++ Unless required by applicable law or agreed to in writing, software
++ distributed under the License is distributed on an "AS IS" BASIS,
++ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
++ See the License for the specific language governing permissions and
++ limitations under the License.
++ .
++ On Debian systems, the complete text of the Apache License,
++ version 2.0, can be found in the file
++ `/usr/share/common-licenses/Apache-2.0'.
++
++Files: debian/*
++Copyright: 2011-2012 Sylvestre Ledru <sylvestre@debian.org>
++ 2012-2023 Sébastien Villemot <sebastien@debian.org>
++License: BSD-2-clause
++ 1. Redistributions of source code must retain the above
++ copyright notice, this list of conditions and the following
++ disclaimer.
++ .
++ 2. Redistributions in binary form must reproduce the above
++ copyright notice, this list of conditions and the following
++ disclaimer in the documentation and/or other materials
++ provided with the distribution.
++ .
++ THIS SOFTWARE IS PROVIDED BY THE UNIVERSITY OF TEXAS AT
++ AUSTIN ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
++ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
++ DISCLAIMED. IN NO EVENT SHALL THE UNIVERSITY OF TEXAS AT
++ AUSTIN OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
++ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
++ GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
++ BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
++ OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
++ POSSIBILITY OF SUCH DAMAGE.
--- /dev/null
--- /dev/null
++prefix=/usr
++libdir=${prefix}/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@
++includedir=${prefix}/include/@DEB_HOST_MULTIARCH@
++Name: openblas-lapack@INDEXING@
++Description: Optimized BLAS (linear algebra) library, LAPACK
++Version: @DEB_VERSION_UPSTREAM@
++URL: https://github.com/xianyi/OpenBLAS
++Libs: -L${libdir} -llapack@INDEXING@
++Libs.private: -L${libdir} -llapack@INDEXING@ -lgfortran -lpthread -lm
++Cflags: -I${includedir}
--- /dev/null
--- /dev/null
++usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig
++usr/lib/@DEB_HOST_MULTIARCH@/cmake/openblas
--- /dev/null
--- /dev/null
++usr/lib/*/@SUBDIR@/libopenblas*.a
++usr/lib/*/@SUBDIR@/libopenblas.so
++usr/lib/*/@SUBDIR@/pkgconfig/*
++usr/lib/*/@SUBDIR@/cmake/*
++usr/include/*/@SUBDIR@/*
--- /dev/null
--- /dev/null
++usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/libopenblas.a usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/libblas.a
++usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/libopenblas.a usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/liblapack.a
++usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/libblas.so.3 usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/libblas.so
++usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/liblapack.so.3 usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/liblapack.so
--- /dev/null
--- /dev/null
++#!/bin/sh
++set -e
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/libblas.so \
++ libblas.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libblas.so \
++ @OPENBLAS_PRI@ \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/libblas.a \
++ libblas.a-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libblas.a \
++ --slave /usr/include/@DEB_HOST_MULTIARCH@/cblas.h \
++ cblas.h-@DEB_HOST_MULTIARCH@ \
++ /usr/include/@DEB_HOST_MULTIARCH@/@SUBDIR@/cblas.h \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/blas.pc \
++ blas.pc-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/pkgconfig/blas-openblas.pc
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/liblapack.so \
++ liblapack.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/liblapack.so \
++ @OPENBLAS_PRI@ \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/liblapack.a \
++ liblapack.a-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/liblapack.a \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/lapack.pc \
++ lapack.pc-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/pkgconfig/lapack-openblas.pc
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/libopenblas.so \
++ libopenblas.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libopenblas.so \
++ @OPENBLAS_PRI@ \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/libopenblas.a \
++ libopenblas.a-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libopenblas.a \
++ --slave /usr/include/@DEB_HOST_MULTIARCH@/cblas-openblas.h \
++ cblas-openblas.h-@DEB_HOST_MULTIARCH@ \
++ /usr/include/@DEB_HOST_MULTIARCH@/@SUBDIR@/cblas.h \
++ --slave /usr/include/@DEB_HOST_MULTIARCH@/f77blas.h \
++ f77blas.h-@DEB_HOST_MULTIARCH@ \
++ /usr/include/@DEB_HOST_MULTIARCH@/@SUBDIR@/f77blas.h \
++ --slave /usr/include/@DEB_HOST_MULTIARCH@/openblas_config.h \
++ openblas_config.h-@DEB_HOST_MULTIARCH@ \
++ /usr/include/@DEB_HOST_MULTIARCH@/@SUBDIR@/openblas_config.h \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/openblas.pc \
++ openblas.pc-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/pkgconfig/openblas.pc \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/cmake/openblas/OpenBLASConfig.cmake \
++ OpenBLASConfig.cmake-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/cmake/openblas/OpenBLASConfig.cmake \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/cmake/openblas/OpenBLASConfigVersion.cmake \
++ OpenBLASConfigVersion.cmake-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/cmake/openblas/OpenBLASConfigVersion.cmake
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++if [ "$1" != "upgrade" ]
++then
++ update-alternatives --remove libblas.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libblas.so
++
++ update-alternatives --remove liblapack.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/liblapack.so
++
++ update-alternatives --remove libopenblas.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libopenblas.so
++fi
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++README.md
++USAGE.md
++CONTRIBUTORS.md
++BACKERS.md
--- /dev/null
--- /dev/null
++libopenblas-dev: wrong-section-according-to-package-name
--- /dev/null
--- /dev/null
++usr/lib/*/@SUBDIR@/libopenblas*-r0.*.so
++usr/lib/*/@SUBDIR@/libopenblas.so.0
++@FLAVOR@/interface/libblas.so.3 usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/
++@FLAVOR@/interface/liblapack.so.3 usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/
--- /dev/null
--- /dev/null
++#! /bin/sh
++set -e
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/libblas.so.3 \
++ libblas.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libblas.so.3 @OPENBLAS_PRI@
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/liblapack.so.3 \
++ liblapack.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/liblapack.so.3 @OPENBLAS_PRI@
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/libopenblas.so.0 \
++ libopenblas.so.0-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libopenblas.so.0 @OPENBLAS_PRI@
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++set -e
++
++if [ "$1" != "upgrade" ]
++then
++ update-alternatives --remove libblas.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libblas.so.3
++
++ update-alternatives --remove liblapack.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/liblapack.so.3
++
++ update-alternatives --remove libopenblas.so.0-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libopenblas.so.0
++fi
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++# We want packages linked with -lblas to depend on any BLAS alternative, and we
++# want packages linked with -lopenblas to depend specifically on libopenblas0.
++#
++# Such a setting is not supported by dh_makeshlibs, so we ship a hand-crafted
++# shlibs file.
++libopenblas 0 libopenblas0
++libblas 3 libblas3 | libblas.so.3
++liblapack 3 liblapack3 | liblapack.so.3
--- /dev/null
--- /dev/null
++libopenblas0-openmp: distant-prerequisite-in-shlibs
++libopenblas0-openmp: package-has-unnecessary-activation-of-ldconfig-trigger
--- /dev/null
--- /dev/null
++libopenblas0-pthread: distant-prerequisite-in-shlibs
++libopenblas0-pthread: package-has-unnecessary-activation-of-ldconfig-trigger
--- /dev/null
--- /dev/null
++libopenblas0-serial: distant-prerequisite-in-shlibs
++libopenblas0-serial: package-has-unnecessary-activation-of-ldconfig-trigger
--- /dev/null
--- /dev/null
++libopenblas0: wrong-section-according-to-package-name
--- /dev/null
--- /dev/null
++usr/lib/*/@SUBDIR@/libopenblas64*-r0.*.so
++usr/lib/*/@SUBDIR@/libopenblas64.so.0
++@FLAVOR@/interface/libblas64.so.3 usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/
++@FLAVOR@/interface/liblapack64.so.3 usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/
--- /dev/null
--- /dev/null
++#! /bin/sh
++set -e
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/libblas64.so.3 \
++ libblas64.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libblas64.so.3 @OPENBLAS_PRI@
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/liblapack64.so.3 \
++ liblapack64.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/liblapack64.so.3 @OPENBLAS_PRI@
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/libopenblas64.so.0 \
++ libopenblas64.so.0-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libopenblas64.so.0 @OPENBLAS_PRI@
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++set -e
++
++if [ "$1" != "upgrade" ]
++then
++ update-alternatives --remove libblas64.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libblas64.so.3
++
++ update-alternatives --remove liblapack64.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/liblapack64.so.3
++
++ update-alternatives --remove libopenblas64.so.0-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libopenblas64.so.0
++fi
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++# We want packages linked with -lblas to depend on any BLAS alternative, and we
++# want packages linked with -lopenblas to depend specifically on libopenblas0.
++#
++# Such a setting is not supported by dh_makeshlibs, so we ship a hand-crafted
++# shlibs file.
++libopenblas64 0 libopenblas64-0
++libblas64 3 libopenblas64-0 | libblas64.so.3
++liblapack64 3 libopenblas64-0 | liblapack64.so.3
--- /dev/null
--- /dev/null
++libopenblas64-0-openmp: distant-prerequisite-in-shlibs
++libopenblas64-0-openmp: package-has-unnecessary-activation-of-ldconfig-trigger
--- /dev/null
--- /dev/null
++libopenblas64-0-pthread: distant-prerequisite-in-shlibs
++libopenblas64-0-pthread: package-has-unnecessary-activation-of-ldconfig-trigger
--- /dev/null
--- /dev/null
++libopenblas64-0-serial: distant-prerequisite-in-shlibs
++libopenblas64-0-serial: package-has-unnecessary-activation-of-ldconfig-trigger
--- /dev/null
--- /dev/null
++libopenblas64-0: wrong-section-according-to-package-name
--- /dev/null
--- /dev/null
++usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig
++usr/lib/@DEB_HOST_MULTIARCH@/cmake/openblas64
--- /dev/null
--- /dev/null
++usr/lib/*/@SUBDIR@/libopenblas64*.a
++usr/lib/*/@SUBDIR@/libopenblas64.so
++usr/lib/*/@SUBDIR@/pkgconfig/*
++usr/lib/*/@SUBDIR@/cmake/*
++usr/include/*/@SUBDIR@/*
--- /dev/null
--- /dev/null
++usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/libopenblas64.a usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/libblas64.a
++usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/libopenblas64.a usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/liblapack64.a
++usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/libblas64.so.3 usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/libblas64.so
++usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/liblapack64.so.3 usr/lib/${DEB_HOST_MULTIARCH}/@SUBDIR@/liblapack64.so
--- /dev/null
--- /dev/null
++#!/bin/sh
++set -e
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/libblas64.so \
++ libblas64.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libblas64.so \
++ @OPENBLAS_PRI@ \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/libblas64.a \
++ libblas64.a-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libblas64.a \
++ --slave /usr/include/@DEB_HOST_MULTIARCH@/cblas64.h \
++ cblas64.h-@DEB_HOST_MULTIARCH@ \
++ /usr/include/@DEB_HOST_MULTIARCH@/@SUBDIR@/cblas.h \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/blas64.pc \
++ blas64.pc-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/pkgconfig/blas-openblas.pc
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/liblapack64.so \
++ liblapack64.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/liblapack64.so \
++ @OPENBLAS_PRI@ \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/liblapack64.a \
++ liblapack64.a-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/liblapack64.a \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/lapack64.pc \
++ lapack64.pc-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/pkgconfig/lapack-openblas.pc
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/libopenblas64.so \
++ libopenblas64.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libopenblas64.so \
++ @OPENBLAS_PRI@ \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/libopenblas64.a \
++ libopenblas64.a-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libopenblas64.a \
++ --slave /usr/include/@DEB_HOST_MULTIARCH@/cblas-openblas64.h \
++ cblas-openblas64.h-@DEB_HOST_MULTIARCH@ \
++ /usr/include/@DEB_HOST_MULTIARCH@/@SUBDIR@/cblas.h \
++ --slave /usr/include/@DEB_HOST_MULTIARCH@/f77blas-openblas64.h \
++ f77blas-openblas64.h-@DEB_HOST_MULTIARCH@ \
++ /usr/include/@DEB_HOST_MULTIARCH@/@SUBDIR@/f77blas.h \
++ --slave /usr/include/@DEB_HOST_MULTIARCH@/openblas64_config.h \
++ openblas64_config.h-@DEB_HOST_MULTIARCH@ \
++ /usr/include/@DEB_HOST_MULTIARCH@/@SUBDIR@/openblas_config.h \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/openblas64.pc \
++ openblas64.pc-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/pkgconfig/openblas64.pc \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/cmake/openblas64/OpenBLAS64Config.cmake \
++ OpenBLAS64Config.cmake-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/cmake/openblas/OpenBLASConfig.cmake \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/cmake/openblas64/OpenBLAS64ConfigVersion.cmake \
++ OpenBLAS64ConfigVersion.cmake-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/cmake/openblas/OpenBLASConfigVersion.cmake
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++if [ "$1" != "upgrade" ]
++then
++ update-alternatives --remove libblas64.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libblas64.so
++
++ update-alternatives --remove liblapack64.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/liblapack64.so
++
++ update-alternatives --remove libopenblas64.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/@SUBDIR@/libopenblas64.so
++fi
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++libopenblas64-dev: wrong-section-according-to-package-name
--- /dev/null
--- /dev/null
++Description: Use flags suitable for armhf port when TARGET=ARMV6
++ See debian/rules for an explanation of why we can't use TARGET=ARMV7 on armhf.
++ Also, if we don't explicitly set the -march and -mfpu flags, the resulting
++ static libraries crash with SIGILL (reason not yet elucidated).
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: not-needed
++Last-Update: 2015-04-29
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/Makefile.arm
+++++ b/Makefile.arm
++@@ -9,8 +9,8 @@ endif
++ endif
++
++ ifeq ($(CORE), ARMV6)
++-CCOMMON_OPT += -mfpu=vfp
++-FCOMMON_OPT += -mfpu=vfp
+++CCOMMON_OPT += -mfpu=vfpv3-d16 -march=armv7-a
+++FCOMMON_OPT += -mfpu=vfpv3-d16 -march=armv7-a
++ endif
++
++ ifdef HAVE_NEON
--- /dev/null
--- /dev/null
++Description: No longer check for symbols deprecated in LAPACK 3.10.1
++Author: Mo Zhou <lumin@debian.org>
++Bug-Debian: https://bugs.debian.org/1011386
++Forwarded: no
++Last-Update: 2022-08-14
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/exports/gensymbol
+++++ b/exports/gensymbol
++@@ -739,12 +739,10 @@ lapackobjs2c="$lapackobjs2c
++ cungtsqr
++ "
++ lapackobjs2d="$lapackobjs2d
++- dcombssq
++ dgesvdq
++ dorgtsqr
++ "
++ lapackobjs2s="$lapackobjs2s
++- scombssq
++ sgesvdq
++ sorgtsqr
++ "
--- /dev/null
--- /dev/null
++Description: MATGEN symbols are not included in Debian binary
++ The libopenblas binaries do not include libmatgen code, so don't mark them as
++ exported and don't test for their presence (in linktest).
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: not-needed
++Last-Update: 2016-03-24
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/exports/gensymbol
+++++ b/exports/gensymbol
++@@ -583,24 +583,6 @@ lapackobjs2c="$lapackobjs2c
++ cggsvp3
++ cgsvj0
++ cgsvj1
++- clagge
++- claghe
++- clagsy
++- clahilb
++- clakf2
++- clarge
++- clarnd
++- claror
++- clarot
++- clatm1
++- clatm2
++- clatm3
++- clatm5
++- clatm6
++- clatme
++- clatmr
++- clatms
++- clatmt
++ cpotrf2
++ csbmv
++ cspr2
++@@ -618,25 +600,6 @@ lapackobjs2d="$lapackobjs2d
++ dggsvd3
++ dggsvp3
++ dladiv2
++- dlagge
++- dlagsy
++- dlahilb
++- dlakf2
++- dlaran
++- dlarge
++- dlarnd
++- dlaror
++- dlarot
++- dlatm1
++- dlatm2
++- dlatm3
++- dlatm5
++- dlatm6
++- dlatm7
++- dlatme
++- dlatmr
++- dlatms
++- dlatmt
++ dorm22
++ dpotrf2
++ dsecnd
++@@ -653,25 +616,6 @@ lapackobjs2s="$lapackobjs2s
++ sggsvd3
++ sggsvp3
++ sladiv2
++- slagge
++- slagsy
++- slahilb
++- slakf2
++- slaran
++- slarge
++- slarnd
++- slaror
++- slarot
++- slatm1
++- slatm2
++- slatm3
++- slatm5
++- slatm6
++- slatm7
++- slatme
++- slatmr
++- slatms
++- slatmt
++ sorm22
++ spotrf2
++ "
++@@ -688,24 +632,6 @@ lapackobjs2z="$lapackobjs2z
++ zggsvp3
++ zgsvj0
++ zgsvj1
++- zlagge
++- zlaghe
++- zlagsy
++- zlahilb
++- zlakf2
++- zlarge
++- zlarnd
++- zlaror
++- zlarot
++- zlatm1
++- zlatm2
++- zlatm3
++- zlatm5
++- zlatm6
++- zlatme
++- zlatmr
++- zlatms
++- zlatmt
++ zpotrf2
++ zsbmv
++ zspr2
--- /dev/null
--- /dev/null
++Description: Adapt build system for the absence of lapack-netlib/ and relapack directories.
++ Instead use the binary provided by package liblapack-pic, stripping from it the
++ symbols that are overridden by OpenBLAS.
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: not-needed
++Last-Update: 2017-07-27
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/Makefile
+++++ b/Makefile
++@@ -275,91 +275,20 @@ hpl_p :
++ fi; \
++ done
++
++-netlib : lapack_prebuild
++-ifneq ($(NO_LAPACK), 1)
++- @$(MAKE) -C $(NETLIB_LAPACK_DIR) lapacklib
++- @$(MAKE) -C $(NETLIB_LAPACK_DIR) tmglib
++-endif
++-ifneq ($(NO_LAPACKE), 1)
++- @$(MAKE) -C $(NETLIB_LAPACK_DIR) lapackelib
++-endif
++-
++-ifeq ($(NO_LAPACK), 1)
++-re_lapack :
+++netlib : lapack-netlib
++
+++lapack-netlib:
+++ mkdir lapack-netlib
+++ifeq (,$(filter libopenblas64%,$(LIBNAME)))
+++ cd lapack-netlib && ar -x /usr/lib/$$(dpkg-architecture -q DEB_HOST_MULTIARCH)/liblapack_pic.a
++ else
++-re_lapack :
++- @$(MAKE) -C relapack
+++ cd lapack-netlib && ar -x /usr/lib/$$(dpkg-architecture -q DEB_HOST_MULTIARCH)/liblapack64_pic.a
++ endif
+++ make -C interface delete-duplicate-lapack-objects
+++ ar -ru $(LIBNAME) `LC_ALL=C ls lapack-netlib/*`
++
++-prof_lapack : lapack_prebuild
++- @$(MAKE) -C $(NETLIB_LAPACK_DIR) lapack_prof
++-
++-lapack_prebuild :
++-ifeq ($(NO_LAPACK), $(filter 0,$(NO_LAPACK)))
++- -@echo "FC = $(FC)" > $(NETLIB_LAPACK_DIR)/make.inc
++-ifeq ($(F_COMPILER), GFORTRAN)
++- -@echo "override FFLAGS = $(LAPACK_FFLAGS) -fno-tree-vectorize" >> $(NETLIB_LAPACK_DIR)/make.inc
++-else
++- -@echo "override FFLAGS = $(LAPACK_FFLAGS)" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++- -@echo "FFLAGS_DRV = $(LAPACK_FFLAGS)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "POPTS = $(LAPACK_FPFLAGS)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "FFLAGS_NOOPT = -O0 $(LAPACK_NOOPT)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "PNOOPT = $(LAPACK_FPFLAGS) -O0" >> $(NETLIB_LAPACK_DIR)/make.inc
++-ifeq ($(C_COMPILER)$(F_COMPILER)$(USE_OPENMP), CLANGGFORTRAN1)
++- -@echo "LDFLAGS = $(FFLAGS) $(EXTRALIB) -lomp" >> $(NETLIB_LAPACK_DIR)/make.inc
++-else
++- -@echo "LDFLAGS = $(FFLAGS) $(EXTRALIB)" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++- -@echo "CC = $(CC)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "override CFLAGS = $(LAPACK_CFLAGS)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "AR = $(AR)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "ARFLAGS = $(ARFLAGS) -ru" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "RANLIB = $(RANLIB)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "LAPACKLIB = ../../$(LIBNAME)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "TMGLIB = ../../../$(LIBNAME)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "BLASLIB = ../../../$(LIBNAME)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "LAPACKELIB = ../../../$(LIBNAME)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "LAPACKLIB_P = ../$(LIBNAME_P)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "SUFFIX = $(SUFFIX)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "PSUFFIX = $(PSUFFIX)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "CEXTRALIB = $(EXTRALIB)" >> $(NETLIB_LAPACK_DIR)/make.inc
++-ifeq ($(F_COMPILER), GFORTRAN)
++- -@echo "TIMER = INT_ETIME" >> $(NETLIB_LAPACK_DIR)/make.inc
++-ifdef SMP
++-ifeq ($(OSNAME), WINNT)
++- -@echo "LOADER = $(FC)" >> $(NETLIB_LAPACK_DIR)/make.inc
++-else ifeq ($(OSNAME), Haiku)
++- -@echo "LOADER = $(FC)" >> $(NETLIB_LAPACK_DIR)/make.inc
++-else
++- -@echo "LOADER = $(FC) -pthread" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++-else
++- -@echo "LOADER = $(FC)" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++-else
++- -@echo "TIMER = NONE" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "LOADER = $(FC)" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++-ifeq ($(BUILD_LAPACK_DEPRECATED), 1)
++- -@echo "BUILD_DEPRECATED = 1" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++-ifeq ($(BUILD_SINGLE), 1)
++- -@echo "BUILD_SINGLE = 1" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++-ifeq ($(BUILD_DOUBLE), 1)
++- -@echo "BUILD_DOUBLE = 1" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++-ifeq ($(BUILD_COMPLEX), 1)
++- -@echo "BUILD_COMPLEX = 1" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++-ifeq ($(BUILD_COMPLEX16), 1)
++- -@echo "BUILD_COMPLEX16 = 1" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++- -@echo "LAPACKE_WITH_TMG = 1" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@cat make.inc >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
+++clean::
+++ rm -rf lapack-netlib
++
++ large.tgz :
++ ifeq ($(NOFORTRAN), $(filter 0,$(NOFORTRAN)))
++@@ -426,10 +355,5 @@ ifeq ($(OSNAME), Darwin)
++ endif
++ @rm -f Makefile.conf config.h Makefile_kernel.conf config_kernel.h st* *.dylib
++ @rm -f cblas.tmp cblas.tmp2
++- @touch $(NETLIB_LAPACK_DIR)/make.inc
++- @$(MAKE) -C $(NETLIB_LAPACK_DIR) clean
++- @rm -f $(NETLIB_LAPACK_DIR)/make.inc $(NETLIB_LAPACK_DIR)/lapacke/include/lapacke_mangling.h
++- @$(MAKE) -C relapack clean
++ @rm -f *.grd Makefile.conf_last config_last.h
++- @(cd $(NETLIB_LAPACK_DIR)/TESTING && rm -f x* *.out testing_results.txt)
++ @echo Done.
++--- a/Makefile.system
+++++ b/Makefile.system
++@@ -44,8 +44,6 @@ else ifeq ($(ARCH), zarch)
++ override ARCH=zarch
++ endif
++
++-NETLIB_LAPACK_DIR = $(TOPDIR)/lapack-netlib
++-
++ # Default C compiler
++ # - Only set if not specified on the command line or inherited from the environment.
++ # - CC is an implicit variable so neither '?=' or 'ifndef' can be used.
++--- a/interface/Makefile
+++++ b/interface/Makefile
++@@ -2384,3 +2384,9 @@ cblas_zgeadd.$(SUFFIX) cblas_zgeadd.$(PS
++ cblas_xerbla.$(SUFFIX) cblas_xerbla.$(PSUFFIX) : xerbla.c
++ $(CC) -c $(CFLAGS) -DCBLAS $< -o $(@F)
++
+++# The list of symbols to be removed can be seen in the diff between LAPACK's
+++# original SRC/Makefile and the version of that same file that is included in
+++# OpenBLAS (unfiltered) tarball
+++delete-duplicate-lapack-objects:
+++ if test -d ../lapack-netlib; then cd ../lapack-netlib \
+++ && rm $(SLAPACKOBJS) $(DLAPACKOBJS) $(CLAPACKOBJS) $(ZLAPACKOBJS) lsame.o xerbla.o; fi
++--- a/Makefile.install
+++++ b/Makefile.install
++@@ -85,15 +85,6 @@ endif
++ endif
++
++ ifneq ($(OSNAME), AIX)
++-ifneq ($(NO_LAPACKE), 1)
++- @echo Copying LAPACKE header files to $(DESTDIR)$(OPENBLAS_INCLUDE_DIR)
++- @-install -m644 $(NETLIB_LAPACK_DIR)/LAPACKE/include/lapack.h "$(DESTDIR)$(OPENBLAS_INCLUDE_DIR)/lapack.h"
++- @-install -m644 $(NETLIB_LAPACK_DIR)/LAPACKE/include/lapacke.h "$(DESTDIR)$(OPENBLAS_INCLUDE_DIR)/lapacke.h"
++- @-install -m644 $(NETLIB_LAPACK_DIR)/LAPACKE/include/lapacke_config.h "$(DESTDIR)$(OPENBLAS_INCLUDE_DIR)/lapacke_config.h"
++- @-install -m644 $(NETLIB_LAPACK_DIR)/LAPACKE/include/lapacke_mangling_with_flags.h.in "$(DESTDIR)$(OPENBLAS_INCLUDE_DIR)/lapacke_mangling.h"
++- @-install -m644 $(NETLIB_LAPACK_DIR)/LAPACKE/include/lapacke_utils.h "$(DESTDIR)$(OPENBLAS_INCLUDE_DIR)/lapacke_utils.h"
++-endif
++-
++ #for install static library
++ ifneq ($(NO_STATIC),1)
++ @echo Copying the static library to $(DESTDIR)$(OPENBLAS_LIBRARY_DIR)
--- /dev/null
--- /dev/null
++Description: Remove warning about OpenMP
++ This warning is annoying when the library is built with pthreads.
++ See #684344
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: no
++Last-Update: 2014-02-17
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/driver/others/blas_server.c
+++++ b/driver/others/blas_server.c
++@@ -891,16 +891,6 @@ int exec_blas(BLASLONG num, blas_queue_t
++ fprintf(STDERR, "Exec_blas is called. Number of executing threads : %ld\n", num);
++ #endif
++
++-#ifdef __ELF__
++- if (omp_in_parallel && (num > 1)) {
++- if (omp_in_parallel() > 0) {
++- fprintf(stderr,
++- "OpenBLAS Warning : Detect OpenMP Loop and this application may hang. "
++- "Please rebuild the library with USE_OPENMP=1 option.\n");
++- }
++- }
++-#endif
++-
++ if ((num > 1) && queue -> next) exec_blas_async(1, queue -> next);
++
++ #ifdef TIMING_DEBUG
--- /dev/null
--- /dev/null
++Description: Revert support for LAPACK ?GEDMD functions
++ Those functions are not yet in LAPACK 3.11 (they are scheduled for a future
++ LAPACK release). Since the Debian package for OpenBLAS relies on the latest
++ stable LAPACK release, we have to (temporarily) remove support for them.
++ .
++ This patch is a revert of upstream commit 174f4e65e320241c7b57136db95d367cac7583d7.
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: no
++Last-Update: 2023-09-09
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/exports/gensymbol
+++++ b/exports/gensymbol
++@@ -768,23 +768,6 @@ lapackobjs2z="$lapackobjs2z
++ zungtsqr_row
++ "
++
++-#functions added for lapack-3.11
++-lapackobjs2c="$lapackobjs2c
++- cgedmd
++- cgedmdq
++- "
++-lapackobjs2d="$lapackobjs2d
++- dgedmd
++- dgedmdq
++- "
++-lapackobjs2s="$lapackobjs2s
++- sgedmd
++- sgedmdq
++- "
++-lapackobjs2z="$lapackobjs2z
++- zgedmd
++- zgedmdq
++- "
++ lapack_extendedprecision_objs="
++ zposvxx clagge clatms chesvxx cposvxx cgesvxx ssyrfssx csyrfsx
++ dlagsy dsysvxx sporfsx slatms zlatms zherfsx csysvxx
++@@ -954,10 +937,6 @@ lapackeobjsc="
++ LAPACKE_cgebrd_work
++ LAPACKE_cgecon
++ LAPACKE_cgecon_work
++- LAPACKE_cgedmd
++- LAPACKE_cgedmd_work
++- LAPACKE_cgedmdq
++- LAPACKE_cgedmdq_work
++ LAPACKE_cgeequ
++ LAPACKE_cgeequ_work
++ LAPACKE_cgeequb
++@@ -1617,10 +1596,6 @@ lapackeobjsd="
++ LAPACKE_dgebrd_work
++ LAPACKE_dgecon
++ LAPACKE_dgecon_work
++- LAPACKE_dgedmd
++- LAPACKE_dgedmd_work
++- LAPACKE_dgedmdq
++- LAPACKE_dgedmdq_work
++ LAPACKE_dgeequ
++ LAPACKE_dgeequ_work
++ LAPACKE_dgeequb
++@@ -2234,10 +2209,6 @@ lapackeobjss="
++ LAPACKE_sgebrd_work
++ LAPACKE_sgecon
++ LAPACKE_sgecon_work
++- LAPACKE_sgedmd
++- LAPACKE_sgedmd_work
++- LAPACKE_sgedmdq
++- LAPACKE_sgedmdq_work
++ LAPACKE_sgeequ
++ LAPACKE_sgeequ_work
++ LAPACKE_sgeequb
++@@ -2847,10 +2818,6 @@ lapackeobjsz="
++ LAPACKE_zgebrd_work
++ LAPACKE_zgecon
++ LAPACKE_zgecon_work
++- LAPACKE_zgedmd
++- LAPACKE_zgedmd_work
++- LAPACKE_zgedmdq
++- LAPACKE_zgedmdq_work
++ LAPACKE_zgeequ
++ LAPACKE_zgeequ_work
++ LAPACKE_zgeequb
--- /dev/null
--- /dev/null
++arm-gcc-flags.patch
++remove-openmp-warning.patch
++no-embedded-lapack.patch
++shared-blas-lapack.patch
++matgen-symbols-not-included.patch
++combssq-deprecate.patch
++revert-lapack-gedmd.patch
--- /dev/null
--- /dev/null
++Description: Create shared libraries lib{blas,lapack}.so.3
++ * It is done so that duplicate code with libopenblas.so.0 is kept as low as
++ possible. Only the symbols from the external BLAS/LAPACK API are incorporated
++ in the shared libraries. The rest is obtained by dynamic linking against
++ libopenblas.so.0. This also gives access to some extra OpenBLAS symbols, in
++ order to differentiate it at runtime from other BLAS implementations (see
++ #960728).
++ The -rpath,'$ORIGIN' is there to ensure that the OpenBLAS flavour used is
++ the one selected in the lib{blas,lapack}.so.3 alternative, and not the one
++ selected in the libopenblas.so.0 alternative.
++ * See also override_dh_shlibdeps in debian/rules
++ * Also order the files when calling `ar' or $(CC), to make
++ the build reproducible (see #824639)
++ * Also link the shared blas and lapack against gomp (see #945791)
++Author: Sébastien Villemot <sebastien@debian.org>
++Author: Alexis Bienvenüe <pado@passoire.fr>
++Author: Mo Zhou <lumin@debian.org>
++Forwarded: not-needed
++Last-Update: 2020-07-31
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/interface/Makefile
+++++ b/interface/Makefile
++@@ -2390,3 +2390,28 @@ cblas_xerbla.$(SUFFIX) cblas_xerbla.$(PS
++ delete-duplicate-lapack-objects:
++ if test -d ../lapack-netlib; then cd ../lapack-netlib \
++ && rm $(SLAPACKOBJS) $(DLAPACKOBJS) $(CLAPACKOBJS) $(ZLAPACKOBJS) lsame.o xerbla.o; fi
+++
+++shared-blas-lapack: libblas.so.3 liblapack.so.3
+++shared-blas64-lapack64: libblas64.so.3 liblapack64.so.3
+++ifneq (0,$(USE_OPENMP))
+++SH_BLAS_LAPACK_OMP=-fopenmp -lgomp
+++endif
+++
+++# The list of prerequisite is created by comparing with NETLIB BLAS public API.
+++# The symbol cblas_xerbla is missing here, but it does not seem to be provided
+++# by libopenblas.so.0 either.
+++libblas.so.3: $(SBLAS1OBJS) $(SBLAS2OBJS) $(SBLAS3OBJS) $(DBLAS1OBJS) $(DBLAS2OBJS) $(DBLAS3OBJS) $(CBLAS1OBJS) $(CBLAS2OBJS) $(CBLAS3OBJS) $(ZBLAS1OBJS) $(ZBLAS2OBJS) $(ZBLAS3OBJS) ../kernel/lsame.o ../kernel/scabs1.o ../kernel/dcabs1.o ../driver/others/xerbla.o
+++ $(CC) $(LDFLAGS) -shared -o $@ $^ -Wl,-soname,libblas.so.3 -L.. -lopenblas $(EXTRALIB) $(SH_BLAS_LAPACK_OMP) -Wl,-rpath,'$$ORIGIN'
+++
+++libblas64.so.3: $(SBLAS1OBJS) $(SBLAS2OBJS) $(SBLAS3OBJS) $(DBLAS1OBJS) $(DBLAS2OBJS) $(DBLAS3OBJS) $(CBLAS1OBJS) $(CBLAS2OBJS) $(CBLAS3OBJS) $(ZBLAS1OBJS) $(ZBLAS2OBJS) $(ZBLAS3OBJS) ../kernel/lsame.o ../kernel/scabs1.o ../kernel/dcabs1.o ../driver/others/xerbla.o
+++ $(CC) $(LDFLAGS) -shared -o $@ $^ -Wl,-soname,libblas64.so.3 -L.. -lopenblas64 $(EXTRALIB) $(SH_BLAS_LAPACK_OMP) -Wl,-rpath,'$$ORIGIN'
+++
+++# The prerequisites must match the symbols deleted in target delete-duplicate-lapack-objects
+++liblapack.so.3: $(SLAPACKOBJS) $(DLAPACKOBJS) $(CLAPACKOBJS) $(ZLAPACKOBJS) ../kernel/lsame.o ../driver/others/xerbla.o
+++ $(CC) $(LDFLAGS) -shared -o $@ $^ `LC_ALL=C ls ../lapack-netlib/*` -Wl,-soname,liblapack.so.3 -L.. -lopenblas $(EXTRALIB) $(SH_BLAS_LAPACK_OMP) -Wl,-rpath,'$$ORIGIN'
+++
+++liblapack64.so.3: $(SLAPACKOBJS) $(DLAPACKOBJS) $(CLAPACKOBJS) $(ZLAPACKOBJS) ../kernel/lsame.o ../driver/others/xerbla.o
+++ $(CC) $(LDFLAGS) -shared -o $@ $^ `LC_ALL=C ls ../lapack-netlib/*` -Wl,-soname,liblapack64.so.3 -L.. -lopenblas64 $(EXTRALIB) $(SH_BLAS_LAPACK_OMP) -Wl,-rpath,'$$ORIGIN'
+++
+++clean::
+++ rm -f libblas.so.3 liblapack.so.3 libblas64.so.3 liblapack64.so.3
--- /dev/null
--- /dev/null
++#!/usr/bin/make -f
++
++# For Ubuntu, see #961725
++export DEB_LDFLAGS_MAINT_STRIP := "-Wl,-Bsymbolic-functions"
++
++include /usr/share/dpkg/buildflags.mk
++include /usr/share/dpkg/pkg-info.mk
++SOVER := 0
++SRCS := $(filter-out debian $(FLAVORS), $(wildcard ./*))
++
++MAKE_OPTIONS := NO_LAPACKE=1 NO_AFFINITY=1 NO_WARMUP=1 CFLAGS="$(CPPFLAGS) $(CFLAGS)" FFLAGS="$(FFLAGS)"
++
++# Avoid having -O2 automatically added (especially for DEB_BUILD_OPTIONS=noopt)
++MAKE_OPTIONS += COMMON_OPT=
++
++# Handle requested number of parallel jobs
++# NB: by default, the OpenBLAS build system uses as many jobs as there are logical
++# cores, so explicitly disable this if parallel build is not requested.
++ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
++ NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
++ MAKE_OPTIONS += MAKE_NB_JOBS=$(NUMJOBS)
++else
++ MAKE_OPTIONS += NO_PARALLEL_MAKE=1
++endif
++
++# Build generic package with hardcoded max number of threads of 64
++GENERIC_OPTIONS := NUM_THREADS=64
++
++# Architectures with dynamic arch selection
++# TARGET=GENERIC is needed to avoid FTBFS when CPU detection fails (see #923607)
++ENABLE_DYNAMIC_ARCHS := amd64 arm64 i386 ppc64el s390x loong64
++ifneq (,$(filter $(DEB_HOST_ARCH),$(ENABLE_DYNAMIC_ARCHS)))
++ GENERIC_OPTIONS += DYNAMIC_ARCH=1 DYNAMIC_OLDER=1 TARGET=GENERIC
++endif
++
++# For other archs, there is no dynamic arch selection. To avoid selecting a
++# target based on the buildd hardware, we enforce a generic-enough target.
++
++# We cannot use the ARMv7 profile on armhf, because it requires a 32-register FP unit.
++# See kernel/arm/KERNEL.ARMv7: it loads some *_vfpv3.S files, which use 32 registers.
++# Also, it FTBFS if GCC flag -mvfpv3 is removed (see arm-gcc-flags.patch), because GCC
++# refuses asm files with 32 FP registers in that case.
++# Issue discussed in https://github.com/xianyi/OpenBLAS/issues/388
++# See also debian/patches/arm-gcc-flags.patch which is related.
++TARGET_OPTION_armhf = TARGET=ARMV6
++# We do not use DYNAMIC_ARCH selection on powerpc and ppc64 because it only
++# works for POWER6 and above.
++# For a correspondence between CPUs and ISAs, see:
++# https://wiki.raptorcs.com/wiki/Power_ISA
++# NB: In OpenBLAS, the POWER3 and POWER4 kernels are actually the same as POWER5.
++# NB2: TARGET=POWER4 leads to a FTBFS on powerpc (with OpenBLAS 0.3.16)
++TARGET_OPTION_powerpc = TARGET=PPCG4
++TARGET_OPTION_ppc64 = TARGET=POWER4
++# We do not use DYNAMIC_ARCH selection on mips64el because it only works for
++# Loongson3R3/3R4
++TARGET_OPTION_mips64el = TARGET=MIPS64_GENERIC
++TARGET_OPTION_riscv64 = TARGET=RISCV64_GENERIC
++TARGET_OPTION_sparc64 = TARGET=SPARC
++GENERIC_OPTIONS += $(TARGET_OPTION_$(DEB_HOST_ARCH))
++
++
++ifeq (,$(filter custom,$(DEB_BUILD_OPTIONS)))
++ # Generic package
++ MAKE_OPTIONS += $(GENERIC_OPTIONS)
++else
++ # Custom package: leave the arch detection to OpenBLAS, and optimize for the current CPU
++ export DEB_CFLAGS_MAINT_APPEND := -march=native -mtune=native
++ export DEB_FFLAGS_MAINT_APPEND := -march=native -mtune=native
++endif
++
++# Flavors: 64-bit array indexing is invalid for 32-bit machines.
++ifeq (64,$(DEB_HOST_ARCH_BITS))
++ FLAVORS = $(SOVER)-pthread $(SOVER)-openmp $(SOVER)-serial 64-$(SOVER)-pthread 64-$(SOVER)-openmp 64-$(SOVER)-serial
++else
++ FLAVORS = $(SOVER)-pthread $(SOVER)-openmp $(SOVER)-serial
++endif
++# FLAVORS = # XXX: Define your target configurations here if you are going to build customized packages
++FLAGS_0-pthread := USE_THREAD=1 USE_OPENMP=0 INTERFACE64=0 LIBPREFIX=libopenblas FCOMMON_OPT=-frecursive
++FLAGS_0-openmp := USE_THREAD=1 USE_OPENMP=1 INTERFACE64=0 LIBPREFIX=libopenblas FCOMMON_OPT='-frecursive -fopenmp'
++FLAGS_0-serial := USE_THREAD=0 USE_OPENMP=0 INTERFACE64=0 LIBPREFIX=libopenblas FCOMMON_OPT=-frecursive
++FLAGS_64-0-pthread := USE_THREAD=1 USE_OPENMP=0 INTERFACE64=1 LIBPREFIX=libopenblas64 FCOMMON_OPT='-frecursive -fdefault-integer-8'
++FLAGS_64-0-openmp := USE_THREAD=1 USE_OPENMP=1 INTERFACE64=1 LIBPREFIX=libopenblas64 FCOMMON_OPT='-frecursive -fopenmp -fdefault-integer-8'
++FLAGS_64-0-serial := USE_THREAD=0 USE_OPENMP=0 INTERFACE64=1 LIBPREFIX=libopenblas64 FCOMMON_OPT='-frecursive -fdefault-integer-8'
++
++# Priority values in the Update-Alternatives mechanism.
++# O,P,S stands for openmp, pthread, serial respectively
++UAPRI_O = 95
++UAPRI_P = 100
++UAPRI_S = 90
++
++
++%:
++ dh $@
++
++override_dh_auto_configure: $(addprefix config_, $(FLAVORS))
++ :
++
++config_%:
++ # shared object packages
++ mkdir $*; cp -r $(SRCS) $*/;
++ for i in install postinst prerm shlibs; do \
++ if test -z "$$(echo $* | grep 64)"; then \
++ cp debian/libopenblas$(SOVER)-XXX.$$i debian/libopenblas$*.$$i; \
++ else \
++ cp debian/libopenblas64-$(SOVER)-XXX.$$i debian/libopenblas$*.$$i; \
++ fi; \
++ sed -i -e "s/@DEB_HOST_MULTIARCH@/$(DEB_HOST_MULTIARCH)/g" \
++ -e "s/@SUBDIR@/openblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))/g" \
++ -e "s/@FLAVOR@/$*/g" \
++ debian/libopenblas$*.$$i; \
++ if test -n "$$(echo $* | grep pthread)"; then \
++ sed -i -e "s/@OPENBLAS_PRI@/$(UAPRI_P)/g" debian/libopenblas$*.$$i; \
++ elif test -n "$$(echo $* | grep openmp)"; then \
++ sed -i -e "s/@OPENBLAS_PRI@/$(UAPRI_O)/g" debian/libopenblas$*.$$i; \
++ else \
++ sed -i -e "s/@OPENBLAS_PRI@/$(UAPRI_S)/g" debian/libopenblas$*.$$i; \
++ fi; \
++ done;
++ # devel packages
++ for i in install links postinst prerm dirs; do \
++ if test -z "$$(echo $* | grep 64)"; then \
++ cp debian/libopenblas-XXX-dev.$$i debian/libopenblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))-dev.$$i; \
++ else \
++ cp debian/libopenblas64-XXX-dev.$$i debian/libopenblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))-dev.$$i; \
++ fi; \
++ sed -i -e "s/@DEB_HOST_MULTIARCH@/$(DEB_HOST_MULTIARCH)/g" \
++ -e "s/@SUBDIR@/openblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))/g" \
++ -e "s/@FLAVOR@/$*/g" \
++ debian/libopenblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))-dev.$$i; \
++ if test -n "$$(echo $* | grep pthread)"; then \
++ sed -i -e "s/@OPENBLAS_PRI@/$(UAPRI_P)/g" debian/libopenblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))-dev.$$i; \
++ elif test -n "$$(echo $* | grep openmp)"; then \
++ sed -i -e "s/@OPENBLAS_PRI@/$(UAPRI_O)/g" debian/libopenblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))-dev.$$i; \
++ else \
++ sed -i -e "s/@OPENBLAS_PRI@/$(UAPRI_S)/g" debian/libopenblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))-dev.$$i; \
++ fi; \
++ done;
++
++override_dh_auto_build:
++ for target in $(addprefix build_, $(FLAVORS)); do \
++ $(MAKE) -f debian/rules $$target || exit 1; done
++
++build_0-pthread:
++ $(MAKE) -C 0-pthread libs netlib shared $(MAKE_OPTIONS) $(FLAGS_0-pthread)
++ $(MAKE) -C 0-pthread/interface shared-blas-lapack $(MAKE_OPTIONS) $(FLAGS_0-pthread)
++build_64-0-pthread:
++ $(MAKE) -C 64-0-pthread libs netlib shared $(MAKE_OPTIONS) $(FLAGS_64-0-pthread)
++ $(MAKE) -C 64-0-pthread/interface shared-blas64-lapack64 $(MAKE_OPTIONS) $(FLAGS_64-0-pthread)
++build_0-openmp:
++ $(MAKE) -C 0-openmp libs netlib shared $(MAKE_OPTIONS) $(FLAGS_0-openmp)
++ $(MAKE) -C 0-openmp/interface shared-blas-lapack $(MAKE_OPTIONS) $(FLAGS_0-openmp)
++build_64-0-openmp:
++ $(MAKE) -C 64-0-openmp libs netlib shared $(MAKE_OPTIONS) $(FLAGS_64-0-openmp)
++ $(MAKE) -C 64-0-openmp/interface shared-blas64-lapack64 $(MAKE_OPTIONS) $(FLAGS_64-0-openmp)
++build_0-serial:
++ $(MAKE) -C 0-serial libs netlib shared $(MAKE_OPTIONS) $(FLAGS_0-serial)
++ $(MAKE) -C 0-serial/interface shared-blas-lapack $(MAKE_OPTIONS) $(FLAGS_0-serial)
++build_64-0-serial:
++ $(MAKE) -C 64-0-serial libs netlib shared $(MAKE_OPTIONS) $(FLAGS_64-0-serial)
++ $(MAKE) -C 64-0-serial/interface shared-blas64-lapack64 $(MAKE_OPTIONS) $(FLAGS_64-0-serial)
++# XXX: why doesn't this work??
++#build_%:
++# $(MAKE) -C $* $(MAKE_OPTIONS) $(FLAGS_$*)
++# $(MAKE) -C $*/interface $(MAKE_OPTIONS) $(FLAGS_$*)
++
++override_dh_auto_test:
++ifeq (,$(filter nocheck,$(DEB_BUILD_OPTIONS)))
++ for target in $(addprefix test_, $(FLAVORS)); do \
++ $(MAKE) -f debian/rules $$target || exit 1; done
++endif
++
++test_0-pthread:
++ $(MAKE) -C 0-pthread tests $(MAKE_OPTIONS) $(FLAGS_0-pthread)
++test_64-0-pthread:
++ $(MAKE) -C 64-0-pthread tests $(MAKE_OPTIONS) $(FLAGS_64-0-pthread)
++test_0-openmp:
++ $(MAKE) -C 0-openmp tests $(MAKE_OPTIONS) $(FLAGS_0-openmp)
++test_64-0-openmp:
++ $(MAKE) -C 64-0-openmp tests $(MAKE_OPTIONS) $(FLAGS_64-0-openmp)
++test_0-serial:
++ $(MAKE) -C 0-serial tests $(MAKE_OPTIONS) $(FLAGS_0-serial)
++test_64-0-serial:
++ $(MAKE) -C 64-0-serial tests $(MAKE_OPTIONS) $(FLAGS_64-0-serial)
++# XXX: why cannot this work?
++#test_%:
++# $(MAKE) -C $* test $(MAKE_OPTIONS) $(FLAGS_$(*))
++
++override_dh_auto_install:
++ for target in $(addprefix install_, $(FLAVORS)); do \
++ $(MAKE) -f debian/rules $$target || exit 1; done
++ # change the inclusion for the 64-bit variant
++ find debian/tmp -type f -path '*openblas64*' -exec sed -i -e 's/openblas_config.h/openblas64_config.h/g' '{}' \;
++
++install_%:
++ $(MAKE) -C $* install $(MAKE_OPTIONS) $(FLAGS_$*) \
++ DESTDIR=../debian/tmp/ PREFIX=/usr \
++ OPENBLAS_INCLUDE_DIR=/usr/include/$(DEB_HOST_MULTIARCH)/openblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))/ \
++ OPENBLAS_LIBRARY_DIR=/usr/lib/$(DEB_HOST_MULTIARCH)/openblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))/
++ # Fix the content of openblas64.pc for 64-bit indexing
++ if test -n "$$(echo $* | grep 64)"; then \
++ sed -i -e "s/^libsuffix=.*$$/libsuffix=64/" \
++ -e "s/Name: openblas$$/Name: openblas64/" \
++ debian/tmp/usr/lib/$(DEB_HOST_MULTIARCH)/openblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))/pkgconfig/openblas64.pc; \
++ fi
++ # Add blas-openblas.pc and lapack-openblas.pc
++ for f in blas-openblas lapack-openblas; do \
++ sed -e "s/@DEB_VERSION_UPSTREAM@/$(DEB_VERSION_UPSTREAM)/g" \
++ -e "s/@DEB_HOST_MULTIARCH@/$(DEB_HOST_MULTIARCH)/g" \
++ -e "s/@SUBDIR@/openblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))/g" \
++ -e "s/@INDEXING@/$$(echo $* | grep -o 64)/g" \
++ < debian/$${f}.pc.in \
++ > debian/tmp/usr/lib/$(DEB_HOST_MULTIARCH)/openblas$(subst $(SOVER)-,-,$(subst -$(SOVER)-,-,$*))/pkgconfig/$${f}.pc; \
++ done
++
++override_dh_auto_clean:
++ $(MAKE) $(MAKE_OPTIONS) clean
++
++execute_after_dh_clean:
++ for flavour in openmp pthread serial; do \
++ rm -rf 0-$${flavour} 64-0-$${flavour}; \
++ for i in install postinst prerm shlibs; do \
++ rm -f debian/libopenblas-$${flavour}-dev.$$i \
++ debian/libopenblas64-$${flavour}-dev.$$i \
++ debian/libopenblas0-$${flavour}.$$i \
++ debian/libopenblas64-0-$${flavour}.$$i; \
++ done; \
++ for i in links dirs; do \
++ rm -f debian/libopenblas-$${flavour}-dev.$$i \
++ debian/libopenblas64-$${flavour}-dev.$$i; \
++ done; \
++ done
++
++# Needed to avoid a dependency on metapackage libopenblas0 from
++# flavour-specific packages, since lib{blas,lapack}.so.3 is dynamically linked
++# against libopenblas.so.0 (see #966607)
++override_dh_shlibdeps:
++ dh_shlibdeps -plibopenblas0-pthread -plibopenblas0-openmp -plibopenblas0-serial -- -xlibopenblas0
++ dh_shlibdeps -plibopenblas64-0-pthread -plibopenblas64-0-openmp -plibopenblas64-0-serial -- -xlibopenblas64-0
++ dh_shlibdeps --remaining-packages -a
--- /dev/null
--- /dev/null
++3.0 (quilt)
--- /dev/null
--- /dev/null
++Tests: upstream-testsuite
++Restrictions: allow-stderr
++Depends: libopenblas-pthread-dev, gfortran
++
++Tests: upstream-testsuite
++Restrictions: allow-stderr
++Depends: libopenblas-openmp-dev, gfortran
++
++Tests: upstream-testsuite
++Restrictions: allow-stderr
++Depends: libopenblas-serial-dev, gfortran
++
++Tests: upstream-testsuite64
++Restrictions: allow-stderr, skippable
++Depends: libopenblas64-pthread-dev [!armhf !i386 !armel !mipsel !hurd-i386 !m68k !powerpc !sh4 !x32], gfortran, dpkg-dev
++
++Tests: upstream-testsuite64
++Restrictions: allow-stderr, skippable
++Depends: libopenblas64-openmp-dev [!armhf !i386 !armel !mipsel !hurd-i386 !m68k !powerpc !sh4 !x32], gfortran, dpkg-dev
++
++Tests: upstream-testsuite64
++Restrictions: allow-stderr, skippable
++Depends: libopenblas64-serial-dev [!armhf !i386 !armel !mipsel !hurd-i386 !m68k !powerpc !sh4 !x32], gfortran, dpkg-dev
--- /dev/null
--- /dev/null
++#!/bin/sh
++# Execute upstream's testsuite against the installed binaries.
++
++set -e
++
++if [ -z "$AUTOPKGTEST_TMP" ]
++then
++ echo "Temporary directory \$AUTOPKGTEST_TMP is not set. Aborting" >&2
++ exit 1
++fi
++
++# Tell us which flavor is being used
++update-alternatives --get-selections | grep '^libopenblas.so'
++
++# Work from $AUTOPKGTEST_TMP as we need to treat the original source as read-only
++cp -a test Makefile* ?_check cpuid* ctest* getarch* param.h "$AUTOPKGTEST_TMP"/
++cd "$AUTOPKGTEST_TMP"/test
++
++# Make tests use the installed binaries instead of using the build result path
++sed -i -e 's,\.\./\$(LIBNAME),,g' Makefile
++sed -i -e '3i CEXTRALIB += -lopenblas' Makefile
++
++# Execute tests
++make
--- /dev/null
--- /dev/null
++#!/bin/sh
++# Execute upstream's testsuite against the installed binaries.
++
++set -e
++
++if [ $(dpkg-architecture -qDEB_HOST_ARCH_BITS) != 64 ]; then
++ echo "$(basename $0): test only supported on 64bit"
++ exit 77
++fi
++
++if [ -z "$AUTOPKGTEST_TMP" ]
++then
++ echo "Temporary directory \$AUTOPKGTEST_TMP is not set. Aborting" >&2
++ exit 1
++fi
++
++# Tell us which flavor is being used
++update-alternatives --get-selections | grep '^libopenblas64.so'
++
++# Work from $AUTOPKGTEST_TMP as we need to treat the original source as read-only
++cp -a test Makefile* ?_check cpuid* ctest* getarch* param.h "$AUTOPKGTEST_TMP"/
++cd "$AUTOPKGTEST_TMP"/test
++
++# Make tests use the installed binaries instead of using the build result path
++sed -i -e 's,\.\./\$(LIBNAME),,g' Makefile
++sed -i -e '3i CEXTRALIB += -lopenblas64' Makefile
++
++# Execute tests
++make FCOMMON_OPT='-frecursive -fdefault-integer-8'
--- /dev/null
--- /dev/null
++Bug-Database: https://github.com/xianyi/OpenBLAS/issues
++Bug-Submit: https://github.com/xianyi/OpenBLAS/issues/new
++Changelog: https://www.openblas.net/Changelog.txt
++Donation: https://github.com/xianyi/OpenBLAS/wiki/Donation
++Repository: https://github.com/xianyi/OpenBLAS.git
++Repository-Browse: https://github.com/xianyi/OpenBLAS/
++Security-Contact: https://github.com/xianyi/OpenBLAS/tree/HEAD/SECURITY.md
--- /dev/null
--- /dev/null
++version=4
++opts=dversionmangle=s/\+ds$//,repacksuffix=+ds,filenamemangle=s/.+\/archive\/refs\/tags\/v(.+)\.tar\.gz$/openblas_$1.orig.tar.gz/ \
++https://github.com/xianyi/OpenBLAS/tags .*/archive/refs/tags/v(\d[\d\.]+)\.tar\.gz
projects / openblas.git / commitdiff