[dgit import tarball u-boot 2021.01+dfsg-5+deb11u1 u-boot_2021.01+dfsg-5+deb11u1.debian.tar.xz]
--- /dev/null
+#!/bin/sh
+
+set -x
+set -e
+builddir="$1"
+platform="$2"
+subarch="$3"
+
+case $platform in
+ dragonboard820c)
+ pagesize=4096
+ base=0x80000000
+ ;;
+ dragonboard410c)
+ pagesize=2048
+ base=0x80000000
+ ;;
+ *)
+ echo "unknown platform ${platform}"
+ exit 1
+ ;;
+esac
+touch ${builddir}/rd
+skales-dtbtool -o "${builddir}/dt.img" "${builddir}/arch/arm/dts"
+skales-mkbootimg --kernel "${builddir}/u-boot-dtb.bin" \
+ --output="${builddir}/u-boot.img" --dt="${builddir}/dt.img" \
+ --pagesize "${pagesize}" --base "${base}" \
+ --ramdisk="${builddir}/rd" --cmdline=""
+
+echo "${builddir}/u-boot.img" "/usr/lib/u-boot/${platform}/" \
+ >> "debian/build/targets.${subarch}"
+
--- /dev/null
+#!/bin/sh
+set -e
+
+dtmodel="/sys/firmware/devicetree/base/model"
+if [ -z "$TARGET" ] && [ -f "${dtmodel}" ]; then
+ dtmodelname=$(cat $dtmodel)
+ case "$dtmodelname" in
+ Firefly-RK3288)
+ TARGET="/usr/lib/u-boot/firefly-rk3288"
+ UBOOT_IMAGE="u-boot.img"
+ ;;
+ Firefly-RK3399|"Firefly-RK3399 Board")
+ TARGET="/usr/lib/u-boot/firefly-rk3399"
+ ;;
+ "Pine64 Pinebook Pro")
+ TARGET="/usr/lib/u-boot/pinebook-pro-rk3399"
+ ;;
+ "Pine64 Rock64")
+ TARGET="/usr/lib/u-boot/rock64-rk3328"
+ ;;
+ "Pine64 RockPro64"|"Pine64 RockPro64 v2.1"|"Pine64 RockPro64 v2.0")
+ TARGET="/usr/lib/u-boot/rockpro64-rk3399"
+ ;;
+ "Radxa ROCK Pi 4")
+ TARGET="/usr/lib/u-boot/rock-pi-4-rk3399"
+ ;;
+ "Theobroma Systems RK3399-Q7 SoM")
+ TARGET="/usr/lib/u-boot/puma-rk3399"
+ UBOOT_OFFSET="512"
+ ;;
+ *)
+ echo >&2 "ERROR: Unknown system: ${dtmodelname}"
+ echo >&2 "Specify target: TARGET=/usr/lib/u-boot/UBOOT"
+ exit 1
+ ;;
+ esac
+fi
+
+LOADER_IMAGE=${LOADER_IMAGE:-"idbloader.img"}
+UBOOT_IMAGE=${UBOOT_IMAGE:-"u-boot.itb"}
+UBOOT_OFFSET=${UBOOT_OFFSET:-"16384"}
+
+DEV="$1"
+if [ -z "$DEV" ] || ! shift || [ -n "$*" ]; then
+ echo >&2 "Usage: $0 /dev/your-sd-or-mmc-or-image"
+ exit 1
+fi
+
+if [ ! -w "$DEV" ] && [ -z "$FORCE" ]; then
+ echo >&2 "$0: device/image ($DEV) must be writable"
+ exit 1
+fi
+
+# FIXME/TODO: check for overwriting partitions overlapping sectors
+# 16384-24575, unless using a compatible partition layout:
+# http://opensource.rock-chips.com/wiki_Partitions
+# loader1 64-7168 idbloader.img
+# loader2 16384-24575 u-boot.itb/u-boot.img
+# trust 24576-32767
+
+echo "Writing idbloader"
+dd conv=notrunc if=${TARGET}/${LOADER_IMAGE} of="$DEV" seek=64
+echo "Writing u-boot image"
+dd conv=notrunc if=${TARGET}/${UBOOT_IMAGE} of="$DEV" seek=${UBOOT_OFFSET}
+sync "$DEV"
--- /dev/null
+#!/bin/sh
+set -e
+
+splfiles="sunxi-spl.bin u-boot-sunxi-with-spl.bin"
+itbfiles="u-boot.itb u-boot-sunxi-with-spl.fit.itb"
+
+dtmodel="/sys/firmware/devicetree/base/model"
+if [ -z "$TARGET" ] && [ -f "${dtmodel}" ]; then
+ dtmodelname=$(cat $dtmodel)
+ case "$dtmodelname" in
+ "Banana Pi BPI-M2-Ultra") TARGET="/usr/lib/u-boot/Bananapi_M2_Ultra" ;;
+ "Banana Pi BPI-M3") TARGET="/usr/lib/u-boot/Sinovoip_BPI_M3" ;;
+ "Banana Pi M2 Berry") TARGET="/usr/lib/u-boot/bananapi_m2_berry" ;;
+ "Cubietech Cubieboard") TARGET="/usr/lib/u-boot/Cubieboard" ;;
+ "Cubietech Cubieboard2") TARGET="/usr/lib/u-boot/Cubieboard2" ;;
+ "Cubietech Cubieboard4") TARGET="/usr/lib/u-boot/Cubieboard4" ;;
+ "Cubietech Cubietruck") TARGET="/usr/lib/u-boot/Cubietruck" ;;
+ "Cubietech Cubietruck Plus") TARGET="/usr/lib/u-boot/Cubietruck_plus" ;;
+ "FriendlyARM NanoPi NEO") TARGET="/usr/lib/u-boot/nanopi_neo" ;;
+ "FriendlyARM NanoPi NEO 2") TARGET="/usr/lib/u-boot/nanopi_neo2" ;;
+ "FriendlyARM NanoPi NEO Air") TARGET="/usr/lib/u-boot/nanopi_neo_air" ;;
+ "FriendlyARM NanoPi NEO Plus2") TARGET="/usr/lib/u-boot/nanopi_neo_plus2" ;;
+ "Lamobo R1") TARGET="/usr/lib/u-boot/Lamobo_R1" ;;
+ "LeMaker Banana Pi") TARGET="/usr/lib/u-boot/Bananapi" ;;
+ "LeMaker Banana Pro") TARGET="/usr/lib/u-boot/Bananapro" ;;
+ "LinkSprite pcDuino") TARGET="/usr/lib/u-boot/Linksprite_pcDuino" ;;
+ "LinkSprite pcDuino3") TARGET="/usr/lib/u-boot/Linksprite_pcDuino3" ;;
+ "Olimex A10-OLinuXino-LIME") TARGET="/usr/lib/u-boot/A10-OLinuXino-Lime" ;;
+ "Olimex A10s-Olinuxino Micro") TARGET="/usr/lib/u-boot/A10s-OLinuXino-M" ;;
+ "Olimex A20-Olimex-SOM-EVB") TARGET="/usr/lib/u-boot/A20-Olimex-SOM-EVB" ;;
+ "Olimex A20-OLinuXino-LIME") TARGET="/usr/lib/u-boot/A20-OLinuXino-Lime" ;;
+ "Olimex A20-OLinuXino-LIME2") TARGET="/usr/lib/u-boot/A20-OLinuXino-Lime2" ;;
+ "Olimex A20-OLinuXino-LIME2-eMMC") TARGET="/usr/lib/u-boot/A20-OLinuXino-Lime2-eMMC" ;;
+ "Olimex A20-Olinuxino Micro") TARGET="/usr/lib/u-boot/A20-OLinuXino_MICRO" ;;
+ "Olimex A64-Olinuxino") TARGET="/usr/lib/u-boot/a64-olinuxino/" ;;
+ "Olimex A64-Olinuxino-eMMC") TARGET="/usr/lib/u-boot/a64-olinuxino-emmc" ;;
+ "Olimex A64 Teres-I") TARGET="/usr/lib/u-boot/teres_i/" ;;
+ "OrangePi Zero Plus2") TARGET="/usr/lib/u-boot/orangepi_zero_plus2/" ;;
+ "OrangePi One Plus") TARGET="/usr/lib/u-boot/orangepi_one_plus/" ;;
+ "Pinebook") TARGET="/usr/lib/u-boot/pinebook" ;;
+ "Pine64 PinePhone Braveheart (1.1)") TARGET='/usr/lib/u-boot/pinephone' ;;
+ "Pine64 PinePhone (1.2)") TARGET='/usr/lib/u-boot/pinephone' ;;
+ "PineTab") TARGET="/usr/lib/u-boot/pinetab" ;;
+ "Pine64+") TARGET="/usr/lib/u-boot/pine64_plus" ;;
+ "Pine64 LTS") TARGET="/usr/lib/u-boot/pine64-lts" ;;
+ "PineRiver Mini X-Plus") TARGET="/usr/lib/u-boot/Mini-X" ;;
+ "Xunlong Orange Pi Plus / Plus 2") TARGET="/usr/lib/u-boot/orangepi_plus" ;;
+ "Xunlong Orange Pi Zero") TARGET="/usr/lib/u-boot/orangepi_zero" ;;
+ *)
+ echo >&2 "ERROR: Unknown system: ${dtmodelname}"
+ echo >&2 "Specify target: TARGET=/usr/lib/u-boot/UBOOT"
+ exit 1
+ ;;
+ esac
+fi
+
+case "$1" in
+ -f|--force)
+ FORCE=y
+ shift;;
+ -*)
+ echo >&2 "$0: unknown option '$1'"
+ exit 1;;
+esac
+
+if [ -z "$(which mkimage)" ]; then
+ echo >&2 "$0: mkimage: command not found. Please install u-boot-tools."
+ exit 1
+fi
+
+DEV="$1"
+if [ -z "$DEV" ] || ! shift || [ -n "$*" ]; then
+ echo >&2 "Usage: $0 /dev/your-sd-or-mmc-or-image"
+ exit 1
+fi
+
+if [ ! -w "$DEV" ] && [ -z "$FORCE" ]; then
+ echo >&2 "$0: device/image ($DEV) must be writable"
+ exit 1
+fi
+DEV="$(readlink -f "$DEV")"
+
+if [ ! -w "$DEV" ] && [ -z "$FORCE" ]; then
+ echo >&2 "$0: device/image ($DEV) not accessible via abs path?!?"
+ exit 1
+fi
+
+if [ -z "$FORCE" ]; then
+ # A very simple sanity check. GPT mandates a "protective MBR" so this works
+ # even with GPT partitioning.
+ if ! printf '\125\252' | cmp -s -i 0:510 -n 2 - "$DEV"; then
+ echo >&2 "$0: device/image ($DEV) has no MBR partition table"
+ exit 1
+ fi
+
+ # But, on sunxi64, spl will trample upon GPT.
+ if printf 'EFI PART' | cmp -s -i 0:512 -n 8 - "$DEV"; then
+ echo >&2 "$0: device/image ($DEV) uses GPT partition table, unusable on sunxi64"
+ exit 1
+ fi
+fi
+
+spl=
+for i in $splfiles ; do
+ i=${TARGET}/$i
+ if [ -f "$i" ]; then
+ spl=$i
+ fi
+done
+
+if [ -z "$spl" ]; then
+ echo >&2 "$0: no known .spl file in ${TARGET}"
+ exit 1
+fi
+
+if [ -n "$itbfiles" ]; then
+ itb=
+ for i in $itbfiles ; do
+ i=${TARGET}/$i
+ if [ -f "$i" ]; then
+ itb=$i
+ fi
+ done
+fi
+
+echo "Writing u-boot SPL image"
+dd conv=notrunc if=${spl} of="$DEV" bs=8k seek=1
+
+if [ -n "$itb" ]; then
+ echo "Writing u-boot FIT image"
+ dd conv=notrunc if=${itb} of="$DEV" bs=8k seek=5
+fi
+
+sync "$DEV"
--- /dev/null
+#!/bin/sh
+target=$1
+subarch_install_file="debian/build/targets.${target}"
+if [ -f "${subarch_install_file}" ]; then
+ cat "${subarch_install_file}"
+fi
--- /dev/null
+#!/bin/sh
+
+target_file=debian/targets
+
+awk '/^[a-z0-9]/{print $2}' ${target_file} | sort -u | while read subarch ; do
+ case ${subarch} in
+ -) package=u-boot ;;
+ *) package=u-boot-${subarch} ;;
+ esac
+ overrides=debian/${package}.lintian-overrides
+
+ cat >${overrides}<<EOF
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+EOF
+
+ sed -n "/^[a-z0-9].*[[:space:]]$subarch[[:space:]]/p" ${target_file} | while read arch subarch2 platform targets ; do
+ echo "${package} binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf"
+ done | LC_ALL=C sort -u >> ${overrides}
+
+ cat >>${overrides}<<EOF
+
+# These bootloaders need to be statically linked.
+EOF
+
+ sed -n "/^[a-z0-9].*[[:space:]]$subarch[[:space:]]/p" ${target_file} | while read arch subarch2 platform targets ; do
+ echo "${package} binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf"
+ done | LC_ALL=C sort -u >> ${overrides}
+
+ cat >>${overrides}<<EOF
+
+# These are bootloader binaries, and have no external dependency information
+EOF
+
+ sed -n "/^[a-z0-9].*[[:space:]]$subarch[[:space:]]/p" ${target_file} | while read arch subarch2 platform targets ; do
+ echo "${package} binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf"
+ done | LC_ALL=C sort -u >> ${overrides}
+
+ cat >>${overrides}<<EOF
+
+${package}: description-synopsis-starts-with-article
+
+EOF
+done
+
+package=u-boot-qemu
+overrides=debian/${package}.lintian-overrides
+cat >>${overrides}<<EOF
+
+# These are binary firmware blobs
+EOF
+
+sed -n "/^all:.*[[:space:]]qemu[[:space:]]/p" ${target_file} | while read arch subarch2 platform targets ; do
+ echo "${package} binary: arch-independent-package-contains-binary-or-object usr/lib/u-boot/*/uboot.elf"
+done | LC_ALL=C sort -u >> ${overrides}
--- /dev/null
+#!/bin/sh
+for file in debian/build/platforms.* ; do
+ subarch=$(echo ${file} | sed -e 's,.*platforms.,,g')
+ case "${subarch}" in
+ -) package=u-boot ;;
+ *) package=u-boot-${subarch} ;;
+ esac
+ echo $(LC_ALL=C sort -u ${file}) | \
+ sed -e 's, ,${Newline},g' \
+ -e 's,^,uboot:platforms=${Newline}Included platforms:${Newline},g' \
+ >> debian/${package}.substvars
+ case "${subarch}" in
+ rockchip|sunxi)
+ printf "uboot:Built-Using=$(dpkg-query -f '${source:Package} (= ${source:Version}) [arm64]' -W arm-trusted-firmware)\n"\
+ >> debian/${package}.substvars
+ ;;
+ esac
+done
--- /dev/null
+u-boot (2021.01+dfsg-5+deb11u1) bullseye-security; urgency=medium
+
+ * Non-maintainer upload by the Debian LTS team.
+ * d/patches/CVE-2022-34835.patch: Add patch to fix CVE-2022-34835.
+ - Fix an integer signedness error and resultant stack-based buffer overflow
+ in the 'i2c md' command that enables the corruption of the return address
+ pointer of the do_i2c_md function (closes: #1014529).
+ * d/patches/CVE-2022-33967.patch: Add patch to fix CVE-2022-33967.
+ - Fix a heap-based buffer overflow vulnerability due to a defect in the
+ metadata reading process which may lead to a denial-of-service (DoS)
+ condition or arbitrary code execution by loading a specially crafted
+ squashfs image.
+ * d/patches/CVE-2022-33103.patch: Add patch to fix CVE-2022-33103.
+ - Fix an an out-of-bounds write (closes: #1014528).
+ * d/patches/CVE-2022-30790.patch: Add patch to fix CVE-2022-30790 and
+ CVE-2022-30552.
+ - Fix a a Buffer Overflow (closes: #1014470).
+ * d/patches/CVE-2022-30767.patch: Add patch to fix CVE-2022-30767.
+ - Fix an unbounded memcpy with a failed length check, leading to a buffer
+ overflow. This issue exists due to an incorrect fix for CVE-2019-14196
+ (closes: #1014471).
+ * d/patches/CVE-2022-2347.patch: Add patch to fix CVE-2022-2347.
+ - Fix an unchecked length field leading to a heap overflow
+ (closes: #1014959).
+ * d/patches/CVE-2024-57254.patch: Add patch to fix CVE-2024-57254.
+ - Fix an integer overflow in sqfs_inode_size (closes: 1098254).
+ * d/patches/CVE-2024-57255.patch: Add patch to fix CVE-2024-57255.
+ - Fix an integer overflow in sqfs_resolve_symlink (closes: #1098254).
+ * d/patches/CVE-2024-57256.patch: Add patch to fix CVE-2024-57256.
+ - Fix an integer overflow in ext4fs_read_symlink (closes: #1098254).
+ * d/patches/CVE-2024-57257.patch: Add patch to fix CVE-2024-57257.
+ - Fix a stack consumption issue in sqfs_size possible with deep symlink
+ nesting (closes: #1098254).
+ * d/patches/CVE-2024-57258-1.patch, d/patches/CVE-2024-57258-2.patch,
+ d/patches/CVE-2024-57258-3.patch: Add patches to fx CVE-2024-57258.
+ - Fix multiple integer overflows (closes: #1098254).
+ * d/patches/CVE-2024-57259.patch: Add patch to fix CVE-2024-57259.
+ - Fix an off-by-one error resulting in a heap memory corruption in
+ sqfs_search_dir (closes: #1098254).
+
+ -- Daniel Leidert <dleidert@debian.org> Thu, 01 May 2025 01:19:02 +0200
+
+u-boot (2021.01+dfsg-5) unstable; urgency=medium
+
+ * debian/patches: Fix boot failure caused by efi loader switching to
+ non-secure mode too early. Thanks to Bastian Germann and Heinrich
+ Schuchardt. (Closes: #988217)
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 22 May 2021 21:32:45 -0700
+
+u-boot (2021.01+dfsg-4) unstable; urgency=medium
+
+ [ Arnaud Ferraris ]
+ * Add support for the pinetab platform (Closes: #982982)
+ * u-boot-install-sunxi: fix device tree model for PinePhone 1.1
+ (Closes: #984704)
+
+ [ Vagrant Cascadian ]
+ * debian/patches: Update PineTab patch use default bootdelay.
+ * debian/patches: Add Forwarded link to PineTab patch.
+ * debian/rules: Ensure debugging symbols are enabled.
+ * debian/rules: Pass argument to remove build path from debug symbols.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Fri, 12 Mar 2021 15:00:43 -0800
+
+u-boot (2021.01+dfsg-3) unstable; urgency=medium
+
+ [ Domenico Andreoli ]
+ * u-boot-install-sunxi: Add support for some armhf
+
+ [ Vagrant Cascadian ]
+ * debian/watch: Fix missing "/".
+
+ [ Andreas B. Mundt ]
+ * Update u-boot-install-sunxi: Add Olimex A20-OLinuXino-LIME2-eMMC
+
+ [ harry88@gmx.ph ]
+ * u-boot-install-sunxi: Avoid overriding files in current directory
+ (Closes: #982278)
+
+ [ Nicolas Boulenguez ]
+ * Enable version 1.1 of the pinephone (Closes: #982981)
+
+ [ Vagrant Cascadian ]
+ * u-boot-install-sunxi: Make installing .itb files optional.
+ * u-boot-install-sunxi: Add support for armhf targets: Banana Pi
+ BPI-M2-Ultra Banana Pi BPI-M3 Banana Pi M2 Berry Cubietech Cubieboard
+ Cubietech Cubieboard2 Cubietech Cubieboard4 Cubietech Cubietruck
+ Cubietech Cubietruck Plus FriendlyARM NanoPi NEO Air Lamobo R1 LeMaker
+ Banana Pi LeMaker Banana Pro LinkSprite pcDuino LinkSprite pcDuino3
+ Olimex A10-OLinuXino-LIME Olimex A10s-Olinuxino Micro Olimex
+ A20-Olimex-SOM-EVB Olimex A20-OLinuXino-LIME Olimex A20-Olinuxino
+ Micro PineRiver Mini X-Plus Xunlong Orange Pi Plus / Plus 2 Xunlong
+ Orange Pi Zero
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 01 Mar 2021 00:00:18 -0800
+
+u-boot (2021.01+dfsg-2) unstable; urgency=medium
+
+ * debian/patches: Disable USE_PREBOOT on rockpro64 and pinebook-pro to
+ workaround boot failure triggered by USB initialization.
+ (Closes: #973323, #980434)
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 21 Jan 2021 20:36:56 -0800
+
+u-boot (2021.01+dfsg-1) unstable; urgency=medium
+
+ [ Nicolas Boulenguez ]
+ * Fix pinephone platform name in u-boot-install-sunxi64.
+ (Closes: #979484)
+ * Insert an empty line in target list for consistency. (Closes: #979485)
+ * Simplify installation of a link for tegra on arm64 but not armhf
+ (Closes: #979486)
+ * Install examples for tools with dh_installexamples instead of
+ dh_install. (Closes: #979295)
+ * Install docs with dh_installdocs instead of dh_install
+ (Closes: #979295)
+
+ [ Vagrant Cascadian ]
+ * u-boot-install-sunxi64: Drop unused code handling ATF.
+ * Rename u-boot-install-sunxi64 to u-boot-install-sunxi. Thanks to
+ Nicolas Boulenguez. (Closes: #979487)
+
+ [ Nicolas Boulenguez ]
+ * Update references to renamed u-boot-install-sunxi64
+ * Prefer dh_installdocs to dh_install for tools too (Closes: #979648).
+ * Remove obsolete maketargets variable (Closes: #979652).
+ * Do not spend time searching for an install target in
+ Makefile. (Closes: #979650)
+ * Prefer dh_auto_build to explicit recursive $(MAKE) (Closes: #979654)
+ * Clarify scope of TOOLSDIR in debian/rules (Closes: #979658).
+ * Make decision about testing tools more explicit (Closes: #979660).
+ * Pass BL31 to puma-rk3399 (Closes: #979482).
+
+ [ Vagrant Cascadian ]
+ * debian/rules: Unset BL31 to avoid using a value from a different
+ platform. Thanks to Nicolas Boulenguez. (Closes: #979482)
+ * u-boot-rockchip: puma-rk3399: install u-boot.itb.
+ * u-boot-install-rockchip: Add support for "Theobroma Systems RK3399-Q7
+ SoM" using the "puma-rk3399" target.
+
+ [ Nicolas Boulenguez ]
+ * Let dh_strip strip tools (Closes: #980234).
+ * Remove obsolete dh_strip override (Closes: #980235).
+ * Clean python cache (Closes: #980237).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 16 Jan 2021 19:50:13 -0800
+
+u-boot (2021.01~rc4+dfsg-2) experimental; urgency=medium
+
+ * debian/targets: Use correct name for "pinephone" target. Fixes FTBFS.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 05 Jan 2021 17:51:36 -0800
+
+u-boot (2021.01~rc4+dfsg-1) experimental; urgency=medium
+
+ [ Nicolas Boulenguez ]
+ * Refresh patches for v2021.01-rc3 (Closes: #976320).
+
+ [ Vagrant Cascadian ]
+ * debian/patches: Remove obsolete teres-i patch.
+ * debian/control: Add Build-Depends on python3-pkg-resources.
+
+ [ Nicolas Boulenguez ]
+ * Add support for pinephone-1.2. (Closes: #976319)
+
+ [ Vagrant Cascadian ]
+ * debian/control: Update Build-Depends on arm-trusted-firmware.
+ * [arm64] u-boot-sunxi: Add orangepi_one_plus target. Thanks to harry88.
+ (Closes: #979216)
+ * [arm64] u-boot-amlogic: Add odroid-n2 target. Thanks to Reco.
+ (Closes: #973256)
+ * u-boot-sunxi: Do not install mksunxi_fit_atf, removed upstream.
+ * u-boot-install-sunxi64: Drop support for using a FIT generator, just
+ use the images generated at build time.
+ * u-boot-install-sunxi64: Add support for OrangePi One Plus.
+ * debian/rules: Disable use of SCP firmware for sunxi platforms.
+ * u-boot-install-sunxi64: Add support for new .itb filenames.
+ * debian/targets: Update to use new .itb filename for sunxi systems.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 05 Jan 2021 10:17:01 -0800
+
+u-boot (2020.10+dfsg-2) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * debian/patches: Enable ethernet on A20-OLinuXino-Lime2-eMMC.
+ (Closes: #916822). Thanks to Jonas Smedegaard.
+ * debian/patches: Fix keyboard on Teres-I (Closes: #935035). Thanks to
+ Jonas Smedegaard.
+
+ [ Nicolas Boulenguez ]
+ * Update Homepage and uscan configuration (Closes: #976317).
+ * Drop obsolete version restriction in Build-Depends (Closes: #976316).
+ * Change behaviour of debian/bin/u-boot-install-* for an unknown device
+ tree (Closes: #976315)
+ * Use specific dh_installman instead of dh_install (Closes: #976318).
+ * Simplify debian/u-boot-tools.install (Closes: #976318).
+ * In debian/rules, add prerequisite configs/*_defconfig
+ (Closes: #976318)
+
+ [ Vagrant Cascadian ]
+ * u-boot-qemu: Ship u-boot.rom for the qemu-x86_64 and qemu-x86
+ targets. Thanks to Faidon Liambotis. (Closes: #979107)
+ * debian/control: Update Standards-Version to 4.5.1.
+ * debian/control: Update Build-Depends on lzop.
+
+ [ Luca Boccassi ]
+ * Build u-boot-tools with signature support with OpenSSL.
+ (Closes: #972513)
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 04 Jan 2021 19:59:11 -0800
+
+u-boot (2020.10+dfsg-1) unstable; urgency=medium
+
+ * New upstream release.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 05 Oct 2020 12:13:28 -0700
+
+u-boot (2020.10~rc5+dfsg-1) experimental; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * New upstream release candidate.
+ * debian/control: u-boot-qemu: Set Multi-Arch: foreign.
+
+ [ Uwe Kleine-König ]
+ * control: Use https for upstream homepage
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 21 Sep 2020 20:55:36 -0700
+
+u-boot (2020.10~rc3+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * debian/patches: Refresh and remove obsolete patches.
+ * [armhf] u-boot-sunxi: Add Bananapi_M2_Ultra (Closes: #962931). Thanks
+ to Bernhard Wörner.
+ * [arm64] u-boot-rockchip: Update rock-pi-4 .dtb names.
+ * u-boot-qemu: Build firmware for qemu ppc e500 (Closes: #966624).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 29 Aug 2020 16:04:17 -0700
+
+u-boot (2020.07+dfsg-2) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * u-boot-install-rockchip: Update with additional RockPro64 names from
+ linux 5.7 device-trees.
+
+ [ Denis Pynkin ]
+ * u-boot-rpi: Add rpi_arm64 target for arm64 (Closes: #966078).
+
+ [ Vagrant Cascadian ]
+ * debian/patches: Fix reproducibility of mx6cuboxi target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Fri, 28 Aug 2020 16:35:40 -0700
+
+u-boot (2020.07+dfsg-1) unstable; urgency=medium
+
+ * New upstream release.
+ * [armhf] u-boot-omap: Drop omap3_pandora, removed upstream.
+ * [arm64] u-boot-amlogic: Install new board-specific documentation.
+ * debian/patches: Fix riscv64 support for extlinux.
+ * debian/control:
+ - Upgrade to debhelper compat 13.
+ - Update Build-Depends on arm-trusted-firmware.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 08 Jul 2020 16:29:02 -0700
+
+u-boot (2020.07~rc4+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * debian/patches:
+ - Remove pinebook-pro patches, applied upstream.
+ - Remove riscv64 patches, applied upstream.
+ * u-boot-rockchip: Update puma-rk3399 to include new
+ rk3399-puma-haikou.dtb file.
+ * Update lintian overrides to use "shared-library-lacks-prerequisites"
+ instead of older tag name.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 09 Jun 2020 18:48:06 -0700
+
+u-boot (2020.07~rc3+dfsg-1) experimental; urgency=medium
+
+ [ Andreas Henriksson ]
+ * u-boot-rpi: Enable rpi4 target on armhf and arm64 (Closes: #958668)
+
+ [ Vagrant Cascadian ]
+ * New upstream release candidate.
+ * debian/patches: Refresh n900 patch.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 04 Jun 2020 09:47:49 -0700
+
+u-boot (2020.07~rc2+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * debian/patches: Refresh.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 18 May 2020 17:16:07 -0700
+
+u-boot (2020.04+dfsg-2) unstable; urgency=medium
+
+ * debian/patches:
+ - Remove dreamplug cache patch, fixed upstream.
+ - Add patches submitted upstream to support pinebook pro.
+ * u-boot-rockchip:
+ - Add support for rockpro64-rk3399.
+ - Add support for pinebook-pro-rk3399.
+ - Add u-boot-install-rockchip helper script.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 20 Apr 2020 19:34:37 -0700
+
+u-boot (2020.04+dfsg-1) unstable; urgency=medium
+
+ * New upstream release.
+
+ [ Vagrant Cascadian ]
+ * Update upstream signing key.
+ * [arm64] Build arm-trusted-firmware into rockchip/sunxi systems.
+ * [arm64] u-boot-sunxi: Add a64-olinuxino-emmc target Thanks to Philip
+ Rinn. (Closes: #956394).
+
+ [ Walter Lozano ]
+ * debian/targets: Add support for rock-pi-4-rk3399
+ * debian/targets: Add target idbloader.img for rk3399 boards
+
+ [ Vagrant Cascadian ]
+ * debian/control: Add versioned Build-Depends on arm-trusted-firmware
+ for rk3399 support.
+ * debian/targets: Add idbloader.img for all rockchip platforms.
+ * u-boot-rockchip: Update README.Debian.
+ * Remove debian/bin/generate-rksd.
+ * u-boot-rockchip: firefly-rk3288: Also install u-boot.img.
+ * [arm64] u-boot-rockchip, u-boot-sunxi: Add Built-Using
+ arm-trusted-firmware.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 14 Apr 2020 17:24:39 -0700
+
+u-boot (2020.04~rc5+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * debian/patches:
+ - Remove patch fixing video on pinebook, fixed upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 07 Apr 2020 08:50:37 -0700
+
+u-boot (2020.04~rc2+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * debian/patches:
+ - riscv64: refresh qemu-riscv64 extlinux patch.
+ - exynos: Refresh patch fixing console.
+ - Drop patches applied upstream.
+ * debian/rules: Disable CONFIG_FIT_SIGNATURE in all targets, as it
+ requires openssl which introduces license incompatibilities with the
+ GPL.
+ * u-boot-rockchip: Update firefly-rk3288 instructions.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 13 Feb 2020 00:17:14 -0800
+
+u-boot (2020.01+dfsg-2) unstable; urgency=medium
+
+ * debian/patches:
+ - Fix video output on pinebook (Closes: #948753).
+ - Fix exynos5 board detection (Closes: #951195). Thanks to Jochen
+ Sprickerhof!
+ - Fix MMC on odroid U3. (Closes: #950293)
+ - Improve error handling with GPT renames. Fixes CVE-2020-8432.
+ * debian/control: Update Standards-Version to 4.5.0, no changes.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 12 Feb 2020 22:29:38 -0800
+
+u-boot (2020.01+dfsg-1) unstable; urgency=medium
+
+ * New upstream release.
+ * debian/rules: Do not call qcom wrapper script.
+ * debian/control: Drop Build-Depends on "skales", removed from testing.
+ * u-boot-rockchip: Use python3 in rockchip_make_fit_atf.
+ * generate-rksd: Only generate SPL rksd on targets not using TPL.
+ * Add build profile pkg.uboot.subarch.* to build only subsets of
+ packages.
+ * [arm64] u-boot-rockchip: Add arm-trusted-firmware and u-boot-tools to
+ Recommends.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 08 Jan 2020 00:19:44 -0800
+
+u-boot (2020.01~rc5+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate (Closes: #941231).
+ * debian/control: Update Build-Depends to use python3 and
+ libpython3-dev, add python3-distutils (Closes: #938739).
+ * [armhf] u-boot-imx: install u-boot-dtb.imx on mx6qsabrelite and
+ nitrogen6q.
+ * debian/patches:
+ - Remove mx6/Revert-spl-imx6-Let-spl_boot_device-return-USDHC1-or,
+ applied upstream.
+ - Refresh riscv64/qemu-riscv64_smode-sifive-fu540-fix-extlinux.
+ - Remove mx6/arm-Set-SYS_DCACHE_OFF-for-MX6-platforms, it was an ugly
+ workaround.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 17 Dec 2019 17:23:23 -0800
+
+u-boot (2019.10+dfsg-1) experimental; urgency=medium
+
+ * u-boot-sifive: Install new fu540 documentation.
+ * debian/patches:
+ - Add qemu-riscv64_smode-sifive-fu540-fix-extlinux-define to fix
+ extlinux support on riscv64 targets.
+ - Drop qemu-riscv64-raw-initrd, it is redundant due to
+ DISTRO_DEFAULTS=y.
+ - Disable dcache on MX6 platforms.
+ - Add patch to revert changes to imx6 MMC boot device order.
+ * debian/control:
+ - Set Rules-Requires-Root: no.
+ - Update Standards-Version to 4.1.1, no changes needed.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 17 Oct 2019 12:23:42 -0700
+
+u-boot (2019.10~rc4+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * u-boot-rockchip: Add rock64-rk3328 target.
+ * u-boot-rockchip: Install rockchip_make_fit_atf and Recommend python3.
+ * generate-rksd: Add support for rk3328 and TPL images.
+ * debian/patches:
+ - Update ensure-config-sandbox-for-make-env.
+ - Update qemu-riscv64-raw-initrd for.
+ - Add description and forwarded links for qemu-riscv64-raw-initrd.
+ * u-boot-qemu: Drop support for qemu_mips, qemu_mipsel and
+ qemu_mips64el as the cross compilers are no longer available.
+ * u-boot-tools:
+ - Remove fw_printenv and fw_setenv and Recommend libubootenv-tool.
+ (Closes: #939598)
+ - Update package description.
+ * README.Debian: Drop references to fw_setenv and fw_printenv.
+ * debian/control:
+ - [arm64] Drop Build-Depends on python-pyelftools; no longer needed
+ for fit image creation.
+ - Update Standards-Version to 4.4.0, no changes needed.
+ - Update to debhelper-compat 12.
+ * debian/copyright: Drop stanza and license for pcmcia; code was
+ removed.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 24 Sep 2019 01:03:23 -0700
+
+u-boot (2019.07+dfsg-1) experimental; urgency=medium
+
+ * New upstream release.
+ * Add support for nanopi_neo_plus2. Thanks to Steev Klimaszewski.
+ * Add support for nanopi_neo_air (Closes: #930013). Thanks to Philip
+ Hands and Domenico Andreoli.
+ * debian/control: [arm64] Add python-pyelftools to Build-Depends.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 08 Jul 2019 16:41:40 -0700
+
+u-boot (2019.07~rc4+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * [sh4] Remove sh7785lcr_32bit, dropped upstream.
+ * debian/rules: Explicitly mark fit signature support as unset.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 11 Jun 2019 16:13:47 -0700
+
+u-boot (2019.07~rc2+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate:
+ (CVE-2019-11059, Closes: #928800)
+ (CVE-2019-11690, Closes: #928557)
+
+ [ Sunil Mohan Adapa ]
+ * Enable pine64-lts target in u-boot-sunxi (Closes: #928947).
+
+ [ Domenico Andreoli ]
+ * Enable support for NanoPi NEO 2 in u-boot-sunxi (Closes: #928612).
+
+ [ Vagrant Cascadian ]
+ * u-boot-omap: Fix installation instructions for various beagleboard.org
+ boards.
+ * Remove patches applied upstream:
+ - upstream/lib-uuid-Fix-unseeded-PRNG-on-RANDOM_UUID-y
+ - sunxi/teres-i
+ - booti/riscv64
+ - qemu-riscv64/riscv-qemu-riscv.h-define-CONFIG_PREBOOT-enables-ext
+ - pocketbeagle/0001-ti-Add-device-tree-for-am335x-pocketbeagle
+ - pocketbeagle/0002-ti-Add-am335x-pocketbeagle-to-am335x_evm_defconfig
+ * u-boot-tools: Use tools-only_defconfig, disabling CONFIG_FIT_SIGNATURE
+ which requires openssl.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Fri, 17 May 2019 21:02:15 -0700
+
+u-boot (2019.07~rc1+dfsg-4) experimental; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * u-boot-qemu: qemu-riscv64: Patch to support loading FDT in extlinux.
+ * Add patches to enable PocketBeagle support to am335x_evm target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 12 May 2019 20:38:27 -0700
+
+u-boot (2019.07~rc1+dfsg-3) experimental; urgency=medium
+
+ * debian/rules: Fail when cross-compiler for an arch:all build is not
+ available.
+ * debian/control: Use architecture negation to not require cross
+ compiler on native architecture in Build-Depends-Indep.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 08 May 2019 01:34:45 -0700
+
+u-boot (2019.07~rc1+dfsg-2) experimental; urgency=medium
+
+ * Update novena-rawsd config: SPL_FAT_SUPPORT -> SPL_FS_FAT.
+ * Add build profile "pkg.uboot.notools" to disable building of
+ u-boot-tools.
+ * [riscv64] Add u-boot-sifive package with sifive_fu540 target.
+ * Add patch to enable booti on RISC-V.
+ * Add patch to enable raw initrd support on qemu-riscv64 targets.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 06 May 2019 13:06:04 -0700
+
+u-boot (2019.07~rc1+dfsg-1) experimental; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * Refresh omap5_distro_bootcmd patch.
+ * Refresh dreamplug cache patch, partially applied upstream.
+ * Remove mkimage patch, applied upstream.
+ * u-boot-amlogic: Updated location of documentation for odroid-c2 and
+ nanopi-k2.
+
+ [ Ivo De Decker ]
+ * Don't run tests if mkimage isn't available
+ * Add separate rules targets to build targets and tools
+ * Use CROSS_COMPILE shell variable instead of makefile variable
+ * Define TARGETARCH variable
+ * Add separate targets for build-arch and build-indep
+ * Add u-boot-qemu package for qemu/kvm (Closes: #907573).
+ * Add preliminary readme for u-boot-qemu
+ * Add qemu_riscv64 target
+ * Don't strip qemu images
+
+ [ Vagrant Cascadian ]
+ * Build-Depends-Indep: Add cross-compilers for amd64, armhf and i386
+ when building on arm64.
+ * Build-Depends: Switch libpython-dev:native, python:any, swig to
+ [linux-any], remove from Build-Depends-Indep.
+ * debian/rules: Allow building arch:all on any architecture, but skip
+ targets missing a cross-compiler.
+ * [mips] Drop qemu_mips from u-boot:mips, depending on u-boot-qemu.
+ * Add lintian overrides for u-boot-qemu.
+ * u-boot-qemu: Add qemu-riscv64_smode target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Fri, 03 May 2019 16:58:13 -0700
+
+u-boot (2019.04+dfsg-2) experimental; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * Add targeted patch fixing mkimage header verification. Drop patch
+ reverting mkimage changes.
+ * [armhf] u-boot-omap: Replace am335x_boneblack with am335x_evm, and
+ update README.Debian accordingly regarding changed partitioning
+ requirements.
+ * [armhf] u-boot-omap: Simpfy the instructions in README for specifying an
+ offset.
+ * debian/rules: Remove linux.itb and linux.its in clean target. Thanks
+ to Jonas Smedegaard.
+
+ [ Jonas Smedegaard ]
+ * Add patch by Vasily Khoruzhick to support Olimex Teres-I DIY laptop.
+ * Enable teres_i target in u-boot-sunxi (Closes: #926040).
+
+ [ Vagrant Cascadian ]
+ * Create an am335x_boneblack defconfig by adapting am335x_evm and
+ removing the extra device trees. This is needed to keep size small
+ enough to fit in a standard 1MB partition offset.
+
+ [ Frédéric Danis ]
+ * Enable orangepi_zero_plus2 target in u-boot-sunxi (Closes: #927224).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 16 Apr 2019 15:46:00 -0700
+
+u-boot (2019.04+dfsg-1) experimental; urgency=medium
+
+ * New upstream release.
+ * Remove patches applied upstream:
+ - dreamplug/ARM-kirkwood-add-spi0-alias-for-dreamplug.patch
+ - exynos/0002-Fix-spelling-of-download.patch
+ - upstream/0001-Fix-typo-missmatched-mismatched.patch
+ - upstream/fs-ext4-Unmount-FS-in-do_fs_type.patch
+ * Refresh patches:
+ - test-imagetools-test-fixes
+ - exynos/0001-arm-config-fix-default-console-only-to-specify-the-d
+ * Add patch reverting changes to mkimage, which breaks compatibility
+ with FIT images used in the wild, and breaks the test suite.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 08 Apr 2019 23:35:43 -0700
+
+u-boot (2019.01+dfsg-7) unstable; urgency=medium
+
+ [ Sunil Mohan Adapa ]
+ * Enable pine64-lts target in u-boot-sunxi (Closes: #928947).
+
+ [ Vagrant Cascadian ]
+ * u-boot-omap: Enable am335x_evm target.
+ * Add patches to enable PocketBeagle in am335x_evm target.
+ * u-boot-omap: Fix instructions for installing beaglebone black.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 13 May 2019 19:07:44 -0700
+
+u-boot (2019.01+dfsg-6) unstable; urgency=medium
+
+ [ Domenico Andreoli ]
+ * Enable support for NanoPi NEO 2 in u-boot-sunxi (Closes: #928612).
+
+ [ Jonas Smedegaard ]
+ * Sync sunxi teres-i patch with mainline u-boot, enabling USB
+ support (Closes: #928815).
+
+ [ Vagrant Cascadian ]
+ * Apply patch from upstream fixing buffer overflow with ext4 filesystems
+ (CVE-2019-11059, Closes: #928800).
+ * Apply patch from upstream fixing randomly generated
+ UUIDs. (CVE-2019-11690, Closes: #928557).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 11 May 2019 18:20:19 -0700
+
+u-boot (2019.01+dfsg-5) unstable; urgency=medium
+
+ [ Jonas Smedegaard ]
+ * Add patch cherry-picked upstream to add i2c initialization for sun50i.
+ * Add patch by Vasily Khoruzhick to support Olimex Teres-I DIY laptop.
+ * Enable teres_i target in u-boot-sunxi (Closes: #926040).
+
+ [ Frédéric Danis ]
+ * Enable orangepi_zero_plus2 target in u-boot-sunxi (Closes: #927224).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Fri, 19 Apr 2019 16:43:08 -0700
+
+u-boot (2019.01+dfsg-4) unstable; urgency=medium
+
+ [ Martyn Welch ]
+ * [armhf] u-boot-imx: Enable build for NXP SABRE Lite.
+
+ [ Neil Armstrong ]
+ * [arm64] u-boot-amlogic: Enable nanopi-k2 and khadas-vim/vim2.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 08 Apr 2019 19:47:02 -0700
+
+u-boot (2019.01+dfsg-3) unstable; urgency=medium
+
+ [ Romain Perier ]
+ * [armel] u-boot-rpi: Add Raspberry Pi Zero W.
+
+ [ Vagrant Cascadian ]
+ * [armhf] u-boot-sunxi: Add bananapi_m2_berry target.
+ (Closes: #923443) Thanks to Lucas Nussbaum.
+ * [armhf] u-boot-imx: Add novena-rawsd target.
+ * Add patches to fix SPI and USB on Dreamplug (Closes: #923379).
+ Thanks to Leigh Brown and Chris Packham.
+ * u-boot-tools: Remove Synopsys lintian override.
+ * Add patch to fix spelling of "mismatched".
+ * Add patch to fix spelling of "download".
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 28 Feb 2019 20:42:31 -0800
+
+u-boot (2019.01+dfsg-2) unstable; urgency=medium
+
+ [ Frédéric Danis ]
+ * Enable libretech-cc target in u-boot-amlogic (Closes: #920947).
+
+ [ Vagrant Cascadian ]
+ * debian/patches: Add patch from upstream to unmount ext4 filesystems
+ preventing a memory leak.
+ * Add patch to fix console setting on exynos platforms. Thanks to
+ Dongjin Kim and Benjamin Drung. (Closes: #920116).
+ * Use wildcards for lintian overrides.
+ * Update tester for p2371-2180 (Jetson-TX1).
+ * Update tester for novena.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 19 Feb 2019 01:09:37 -0800
+
+u-boot (2019.01+dfsg-1) unstable; urgency=medium
+
+ * New upstream release (Closes: #918940).
+ * Update tester for firefly-rk3288.
+ * debian/control: Build-Depends: use debhelper-compat.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 14 Jan 2019 16:36:19 -0800
+
+u-boot (2019.01~rc3+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Update upstream signing key format.
+ * Remove pinebook patches, applied upstream.
+ * Drop mipsel-native-endianness patch.
+ * [arm64] u-boot-amlogic: Update README for odroid-c2.
+ * [armhf] u-boot-rockchip: Add firefly-rk3288 target.
+ * debian/rules: Call strip --strip-unneeded and --remote-section=.note
+ to comply with Debian policy 4.3.0.
+ * debian/control: Update Standards-Version to 4.3.0.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 08 Jan 2019 15:42:38 -0800
+
+u-boot (2018.11+dfsg-2) unstable; urgency=medium
+
+ * u-boot-install-sunxi64:
+ - Detect target based on running device-tree.
+ - Prefer BL31 from arm-trusted-firmware over atf-allwinner.
+ - Error out when mkimage is not found and Recommend u-boot-tools
+ (Closes: #913879). Thanks to Nicolas Schier.
+ * [arm64] u-boot-sunxi: Update Recommends to use arm-trusted-firmware
+ instead of atf-allwinner.
+ * [arm64] u-boot-amlogic: Add Recommends on arm-trusted-firmware.
+ * Update upstream signing key.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 09 Dec 2018 08:16:44 +0100
+
+u-boot (2018.11+dfsg-1) unstable; urgency=medium
+
+ * New upstream release.
+ * [armhf] u-boot-imx: Drop udoo patches, full support for distro_bootcmd
+ is enabled upstream.
+ * [armhf] u-boot-rockchip: Drop firefly-rk3288 target (Closes: #898520).
+ * [arm64] u-boot-sunxi: Enable a64-olinuxino target (Closes: #881564).
+ Thanks to Rodrigo Exterckötter Tjäder.
+ * Add Pinebook support patches from sunxi maintainer tree.
+ * [arm64] u-boot-sunxi: Add pinebook target.
+ * [armel] Drop openrd targets, which FTBFS and are orphaned upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 14 Nov 2018 13:32:35 -0800
+
+u-boot (2018.09+dfsg-1) experimental; urgency=medium
+
+ * New upstream release.
+ * Remove patches applied upstream.
+ * Refresh udoo quad support patch.
+ * Increase verbosity of make unless DEB_BUILD_OPTIONS=terse.
+ * Update Standards-Version to 4.2.1.
+ * [armhf] u-boot-sunxi: Enable Sinovoip Banana Pi M3 (Closes: #905922).
+ Thanks to Bernhard.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 10 Sep 2018 23:59:21 -0700
+
+u-boot (2018.07+dfsg-1) experimental; urgency=medium
+
+ * New upstream release.
+ * u-boot-imx: Remove mx6cuboxi4x4 target, as ram is now properly
+ detected with mx6cuboxi.
+ * debian/watch: Add repack and compression=xz options.
+ * debian/rules: Remove get-orig-source target.
+ * debian/control: Update Standards-Version to 4.1.5.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 09 Jul 2018 13:34:06 -0700
+
+u-boot (2018.07~rc2+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate:
+ - Fixes USB on Pine64+.
+ * [armhf] u-boot-sunxi: Enable A20-OLinuXino-Lime2-eMMC.
+ (Closes: #901666). Thanks to Andreas B. Mundt.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 20 Jun 2018 23:47:25 -0700
+
+u-boot (2018.07~rc1+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied in 2018.07-rc1.
+ * Refresh sheevaplug/sys_thumb_build patch.
+ * Add Build-Depends on bison and flex.
+ * Update patch series for odroid distro_bootcmd support.
+ * Add patch submitted upstream to consistently set default fdtfile value
+ on rockchip systems.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 05 Jun 2018 15:07:35 -0700
+
+u-boot (2018.05+dfsg-1) unstable; urgency=medium
+
+ * New upstream release.
+ * Refresh debian/patches for 2018.05.
+ * [armel] sheevaplug: Add patch to enable thumb build to reduce size of
+ u-boot.kwb (Closes: #897671).
+ * u-boot-rockchip: Add patch to fix serial output (Closes: #898276).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 10 May 2018 13:24:57 -0700
+
+u-boot (2018.05~rc3+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied or obsoleted upstream:
+ - firefly/fdtfile
+ - odroid-c2/0001-mmc-avoid-division-by-zero-in-meson_mmc_config_clock
+ * Add patch to set timestamp and umask when building multi-dtb fit
+ image (Closes: #896526).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 01 May 2018 14:48:55 -0700
+
+u-boot (2018.05~rc2+dfsg-2) experimental; urgency=medium
+
+ * [arm64] Add u-boot-mvebu, and enable the espressobin target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 19 Apr 2018 15:10:58 -0700
+
+u-boot (2018.05~rc2+dfsg-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Refresh patches:
+ - Makefile-add-kwb-target-to-all.patch
+ - am57xx/omap5_distro_bootcmd
+ * debian/control:
+ - Add Build-Depends for lzop, used on the AM57xx target.
+ - Update Standards-Version to 4.1.4, no changes.
+ * Install build configs to /usr/share/doc/*/configs.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 17 Apr 2018 16:05:55 -0700
+
+u-boot (2018.03+dfsg1-2) unstable; urgency=medium
+
+ [ Riku Voipio ]
+ * u-boot-qcom: Add dragonboard 820c build (Closes: #894212).
+
+ [ Vagrant Cascadian ]
+ * u-boot-install-sunxi64: Ignore device write checks when FORCE is set.
+ * u-boot-exynos: Update odroid patch to support distro_bootcmd, dropping
+ support for legacy boot.
+ * Add back uboot.elf, used to install jetson-tx1 (Closes: #893908).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 01 Apr 2018 18:20:06 -0700
+
+u-boot (2018.03+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+ * Update patches for new upstream release.
+ * debian/rules: Update default configuration for tools target.
+ * [arm64] u-boot-rockchip: Add puma-rk3399 target.
+ * Switch Vcs-* to use salsa.debian.org.
+ * debian/rules: Fix typo that disabled 4GB ram support for the
+ mx6cuboxi4x4 target (Closes: #893062).
+ * Add patch to fix mmc support on Odroid-C2. Thanks to Jaehoon Chung and
+ Heinrich Schuchardt.
+ * u-boot-sunxi:
+ - Add u-boot-install-sunxi64 script (Closes: #891490). Thanks to Adam
+ Borowski.
+ - [arm64] Add recommends on atf-allwinner.
+ * debian/copyright: Updated location for libfdt.
+ * Drop installation of uboot.elf, as it is stripped of debugging symbols
+ and therefor not particularly useful.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 18 Mar 2018 18:36:58 -0700
+
+u-boot (2018.01+dfsg1-2) unstable; urgency=medium
+
+ * Update to use https copyright format URL.
+ * debian/rules: Remove "dh --parallel", default in debhelper compat 11.
+ * debian/patches:
+ - Remove patch for IGEP board that was never applied.
+ - Fix typo in mx6cubox-i4x4 patch description.
+ - Add description to no-force-cross-compile-powerpc patch.
+ - Add a description for the omap5_distro_bootcmd patch.
+ - Remove patch for hurd support, as no packages are built on that
+ hurd.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 20 Feb 2018 16:49:33 -0800
+
+u-boot (2018.01+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release.
+ * debian/patches: Refresh and removed.
+ * debian/control:
+ - Update to Standards-Version 4.1.3, no changes.
+ - Build-Depend on debhelper 11.
+ * debian/compat: Switch to debhelper compatibility level 11.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 08 Jan 2018 19:19:02 -0800
+
+u-boot (2017.11+dfsg1-3) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * Add patch submitted upstream to fix ethernet on Olimex
+ A20-Olinuxino-Micro Rev. J (Closes: #864562).
+
+ [ Marek Vasut ]
+ * Disable DDR calibration on DH iMX6 (Closes: #884442).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 07 Jan 2018 14:19:18 -0800
+
+u-boot (2017.11+dfsg1-2) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * u-boot-tools: Fix broken FIT image generation by building tools-only
+ target with an empty defconfig.
+ * Run basic tests for mkimage/dumpimage.
+
+ [ Marek Vasut ]
+ * Backport DH iMX6 DDR configuration fix (Closes: #882123).
+
+ [ Vagrant Cascadian ]
+ * debian/control: Bump Standards-Version 4.1.2, no changes.
+ * debian/rules: Use dpkg/architecture.mk instead of manually calling
+ dpkg-architecture.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 05 Dec 2017 15:43:23 -0800
+
+u-boot (2017.11+dfsg1-1) experimental; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * Remove patches applied upstream.
+ * Refresh patches.
+ * Drop beaglebone black patch for usb-mass-storage.
+
+ [ Marek Vasut ]
+ * Add DHCOM i.MX6 PDK board support (Closes: #881298).
+
+ [ Vagrant Cascadian ]
+ * u-boot-sunxi: Include documentation for pine64 using u-boot SPL
+ (Closes: #842688).
+ * u-boot-rockchip: Include rk3399-firefly.dtb instead of generic
+ u-boot.dtb file.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Fri, 17 Nov 2017 12:02:57 -0800
+
+u-boot (2017.09+dfsg1-3) unstable; urgency=medium
+
+ * Set the fdtfile variable from the value of CONFIG_DEFAULT_DEVICE_TREE
+ (Closes: #870897). Thanks to Diego Roversi for the bug report!
+ * Add patch to fix building jffs2 with gcc-7 (Closes: #877963). Thanks
+ to Adrian Bunk!
+ * Update Standards-Version of Debian Policy 4.1.1, no changes needed.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 09 Oct 2017 15:14:03 -0700
+
+u-boot (2017.09+dfsg1-2) unstable; urgency=medium
+
+ * u-boot-imx: mx6cuboxi4x4: Use a symlink for u-boot.img to mx6cuboxi,
+ as it is identical.
+ * u-boot-imx/u-boot-omap: Do not install spl/u-boot-spl.bin when the
+ target uses SPL or MLO.
+ * debian/rules: Generate mx6cuboxi4x4_defconfig based on
+ mx6cuboxi_defconfig.
+ * debian/rules: Do not install uboot.elf in mx6cuboxi4x4 target.
+ * debian/rules: Only build the SPL target on mx6cuboxi4x4.
+ * debian/patches: Fix odroid patch to actually use distro_bootcmd.
+ * u-boot-rockchip: Fix USB on firefly-rk3399 with patches from upstream.
+ * u-boot-exynos: Add patch to fix "console" environment variable
+ (Closes: #877074). Thanks to Peter Lebbing!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 05 Oct 2017 16:09:47 -0700
+
+u-boot (2017.09+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release.
+ * Refreshed patches for new upstream version.
+ * Update check for generating u-boot.rksd.
+ * [armhf] u-boot-omap: Update to use igep00x0 target, which replaced
+ igep0020.
+ * debian/rules:
+ - Use pkg-info.mk from dpkg-dev to set SOURCE_DATE_EPOCH and get the
+ package version.
+ - Switch "env" target to "envtools".
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 12 Sep 2017 13:19:29 -0700
+
+u-boot (2017.07+dfsg1-3) unstable; urgency=medium
+
+ * u-boot-rockchip:
+ - Generate u-boot.rksd used for firefly-rk3288 installation.
+ - Add README.Debian describing how to install firefly-rk3288.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Fri, 04 Aug 2017 15:56:56 -0400
+
+u-boot (2017.07+dfsg1-2) unstable; urgency=medium
+
+ * u-boot-rockchip:
+ - Ship u-boot.bin in firefly-rk3288 instead of u-boot.img.
+ - Add NEWS file explaining the change for firefly-rk3288.
+ * u-boot-imx:
+ - mx6cuboxi: Add patch from upstream to support SATA.
+ - Add patch to enable booting from SATA on wandboard.
+ * u-boot-tools:
+ - Install upstream fw_env.config, which includes several
+ well-commented examples.
+ * Consistantly use dd with conv=fsync,notrunc in Debian README files
+ (Closes: #864742). Thanks to Heinrich Schuchardt.
+ * debian/control:
+ - Update to Standards-Version 4.0.0.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 01 Aug 2017 17:10:48 -0400
+
+u-boot (2017.07+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+ * debian/patches:
+ - Refresh am57xx/omap5_distro_bootcmd.
+ - Refresh distro_bootcmd patches for am57xx and odroid.
+ - Sync mx6cuboxi4x4 patch with mx6cuboxi.
+ * u-boot-sunxi: Install README.sunxi64.
+ * [arm64] u-boot-sunxi: Install additional pine64 targets needed to
+ manually build an SPL image.
+ * [arm64] u-boot-rockchip: Add firefly-rk3399 target.
+ * [armhf] Add Build-Depends on libpython-dev:native and swig.
+ * [arm64] Add build-depends on libpython-dev:native, python and swig.
+ * debian/rules: Split generation of rksd images into script, supporting
+ generation for both rk3288 and rk3399 systems.
+ * debian/copyright: Remove entries from Files-Excluded no longer present
+ upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 10 Jul 2017 12:46:22 -0700
+
+u-boot (2017.05+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release.
+ * Remove patches, applied upstream:
+ - odroid-c2/0001-meson-gxbb-enable-MMC-as-boot-target.patch
+ - odroid-c2/0002-meson-gxbb-change-ramdisk_addr_r.patch
+ * Refresh patches:
+ - am57xx/omap5_distro_bootcmd
+ - n900-bootz-raw-initrd.diff
+ * Split Build-Depends into multiple lines.
+ * Add dependencies for cross-building arm64, armhf and armel.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 08 May 2017 17:17:42 -0700
+
+u-boot (2017.05~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+
+ * Remove patches applied upstream:
+ - mx6cuboxi/serial_console_speed
+ - Makefile-Fix-linking-with-modern-binutils
+
+ * Refresh patches:
+ - am57xx/omap5_distro_bootcmd
+ - arndale/board-spl-rule
+
+ * [arm64] Add u-boot-amlogic
+ - Enable the odroid-c2 target.
+ - Add patches:
+ + Enable MMC boot on odroid-c2.
+ + Fix ramdisk load address on odroid-c2.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 18 Apr 2017 20:24:42 -0700
+
+u-boot (2017.05~rc1+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+
+ * Refresh patches:
+ - beagleboneblack usb-mass-storage.
+ - mx6cuboxi4x4.
+ - Update am57xx distro_bootcmd patch and also fix for dra7xx_evm.
+
+ * Remove patches applied upstream:
+ - orangepi_zero
+ - openrd
+
+ * Add patches from upstream:
+ - Fix building with binutils.
+
+ * Update lintian overrides with openrd targets.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 12 Apr 2017 10:47:29 -0700
+
+u-boot (2016.11+dfsg1-4) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * [armel] Apply a patch from upstream to fix openrd targets which failed
+ to boot, and re-enable the openrd targets (Closes: #856441). Thanks to
+ Albert ARIBAUD for the patch, Martin Michlmayr for pointing out the
+ patch, and Phil Hands and Rick Thomas for testing on various openrd
+ platforms.
+
+ [ Martin Michlmayr ]
+ * u-boot-rpi: typo in README.Debian (Closes: #858574).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 27 Mar 2017 14:39:51 -0400
+
+u-boot (2016.11+dfsg1-3) unstable; urgency=medium
+
+ [ Peter Michael Green ]
+ * u-boot-imx: Add patch to add an mx6cuboxi4x4 target, supporting boards
+ with 4GB of ram (Closes: #848911).
+
+ [ Vagrant Cascadian ]
+ * u-boot-sunxi: Add patches to support orangepi_zero.
+ (Closes: #848557). Thanks to Mateusz Łukasik.
+ * Add Rick Thomas to mx6cuboxi testers.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 21 Dec 2016 20:44:44 -0800
+
+u-boot (2016.11+dfsg1-2) unstable; urgency=medium
+
+ * u-boot-sunxi: Add nanopi_neo target.
+ Thanks to Paul Tagliamonte. (Closes: #845932).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Fri, 16 Dec 2016 14:10:52 +0100
+
+u-boot (2016.11+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+ * Remove mksunxiboot-spl patch, applied upstream.
+ * Refresh patches.
+ * Enable Cubieboard4 target.
+ * Remove patches for ram detection on rk3288, applied upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 17 Nov 2016 11:10:12 -0800
+
+u-boot (2016.11~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Refresh patch for am57xx to use distro_bootcmd support.
+ * Remove patches from 2016.09.01, applied upstream.
+ * Add patches to enable ram detection on rockchip rk3288 platforms.
+ * Update lintian overrides for openrd removal.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 27 Oct 2016 11:25:47 -0700
+
+u-boot (2016.09+dfsg1-2) unstable; urgency=medium
+
+ * odroid-xu3: Add patch to use the default bootdelay from
+ distro_bootcmd.
+ * Remove Philip Rinn from Cubieboard2 testers.
+ * u-boot-rpi: Add documentation for configuring raspberry pi to use
+ u-boot.
+ * debian/watch: Add signature checking of upstream tarball.
+ * u-boot-tools: Add device-tree-compiler to Recommends. Thanks to
+ Pierre-Hugues Husson. (Closes: #841351).
+ * Apply patches from v2016.09.01:
+ - 0001-Revert-Increase-default-of-CONFIG_SYS_MALLOC_F_LEN-f.patch
+ - 0002-Revert-image-fit-switch-ENOLINK-to-ENOENT.patch
+ * Remove openrd targets, as they do not boot (Closes: #837629).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 23 Oct 2016 19:36:36 -0700
+
+u-boot (2016.09+dfsg1-1) unstable; urgency=medium
+
+ * New upstream version.
+
+ [ Vagrant Cascadian ]
+ * Remove Ian Campbell from the list of arndale testers.
+ * Remove Joey Hess from the A10-OLinuXino-Lime testers.
+ * [armhf] u-boot-sunxi: Enable the CHIP target.
+ * Refresh and remove patches applied upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 12 Sep 2016 12:43:29 -0700
+
+u-boot (2016.09~rc2+dfsg1-1) experimental; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * New upstream release candidate.
+ * Simplify cross-building in debian/rules.
+ * Refresh debian/patches/tools-only-in-no-dot-config-targets.diff
+ * u-boot-omap:
+ - Add omap3_pandora target.
+ - Add patches to switch omap3-pandora to use distro bootcmd.
+ * Add patches from upstream to fix cache issues.
+
+ [ Martin Michlmayr ]
+ * Generate bootable image for DragonBoard 410c (Closes: #835656).
+
+ [ Vagrant Cascadian ]
+ * [arm64] Fix cross-building of DragonBoard 410c:
+ - Allow skales:native to satisfy build-dependency.
+ - Add build-depends on libfdt-dev:native.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 30 Aug 2016 11:36:35 -0700
+
+u-boot (2016.09~rc1+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream.
+ * Remove redundant u-boot-rockchip.docs, as it is handled in the
+ u-boot-rockchip.install file.
+ * u-boot-sunxi: Install README for pine64 target.
+ * Add build-depends on python:any [armhf], which is now required to
+ build the firefly-rk3288 target.
+ * Fix build of firefly-rk3288 target, which now uses u-boot-spl.bin to
+ generate rksd image.
+ * Build u-boot.img and u-boot.bin instead of deprecated u-boot-dtb.*
+ targets.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 01 Aug 2016 00:42:12 -0700
+
+u-boot (2016.07~rc3+dfsg1-2) experimental; urgency=medium
+
+ * [armel] Apply patch from upstream that fixes FTBFS on openrd variants.
+ (Closes: #830169).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 07 Jul 2016 11:17:30 +0200
+
+u-boot (2016.07~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+
+ [ Vagrant Cascadian ]
+ * u-boot-sunxi: Enable on arm64.
+ * u-boot-sunxi: Enable pine64_plus target on arm64.
+ * Remove reproducibility patches, applied upstream.
+
+ [ Ricardo Salveti ]
+ * [arm64] Add u-boot-qcom package and enable dragonboard410c target
+ (Closes: #824955).
+ * Add patch submitted upstream "dragonboard410c: adding missing default
+ addr for script and pxe boot."
+ * Add patch submitted upstream "dragonboard410c: prefer sdcard boot over
+ emmc"
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 05 Jul 2016 12:34:49 +0200
+
+u-boot (2016.07~rc1+dfsg1-3) experimental; urgency=medium
+
+ [ Martin Michlmayr ]
+ * Add NVIDIA to Tegra description
+ * u-boot-tegra.README.Debian: fix name of package
+ * u-boot-tegra.README.Debian: improve Jetson TK instructions.
+ (Closes: #827081).
+
+ [ Vagrant Cascadian ]
+ * debian/control: u-boot-tools is not needed when cross-building on
+ arm64.
+ * Add patch to respect SOURCE_DATE_EPOCH when building FIT images,
+ fixing reproducibility issues with dra7xx_evm target. Thanks to HW42
+ for the patch.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 16 Jun 2016 12:29:51 -0700
+
+u-boot (2016.07~rc1+dfsg1-2) experimental; urgency=medium
+
+ * u-boot-tegra: Only install p2371-2180 symlink on arm64.
+ (Closes: #826905). Thanks to Martin Michlmayr for the report!
+ * Add patch to fix reproducibility issues with ld and some
+ locales. Thanks to HW42!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 12 Jun 2016 06:15:22 -0700
+
+u-boot (2016.07~rc1+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+
+ [ Martin Michlmayr ]
+ * u-boot-tegra:
+ - Add Jetson TX1 (P2371-2180) target (Closes: #825458).
+ - Add arm64 arch.
+ - Update README.Debian for Jetson TX1.
+
+ [ Vagrant Cascadian ]
+ * u-boot-omap: Update use dra7xx_evm target.
+ * u-boot-imx: Remove patch to us private libgcc on imx systems.
+ * u-boot-exynos:
+ - Refresh odroid distro_bootcmd patch.
+ - Increase default environment size on odroid-u3 to support
+ distro_bootcmd.
+ * u-boot-sunxi: Enable Cubietruck_plus target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 07 Jun 2016 12:04:16 -0700
+
+u-boot (2016.05+dfsg1-1) experimental; urgency=medium
+
+ * New upstream version.
+
+ [ Ryan Finnie ]
+ * u-boot-rpi: Add rpi_3, rpi_3_32b target (Closes: #823524).
+ * u-boot-rpi: Add arm64 arch.
+
+ [ Vagrant Cascadian ]
+ * Remove patches applied upstream:
+ - Revert-ti_armv7_common.h-Fix-U-Boot-location-on-eMMC.patch
+ - Revert-rockchip-rk3288-correct-sdram-setting.patch
+ - odroid-Update-README-with-correct-firmware-link-and-.patch
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 17 May 2016 13:03:11 -0700
+
+u-boot (2016.05~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Update debian/patches for 2016.05-rc3.
+ * u-boot-rockchip:
+ - Revert upstream patch to fix detected ram size on Firefly boards.
+ * u-boot-imx:
+ - Add patch to fix FTBFS by using u-boot's private libgcc.
+ * u-boot-tools:
+ - Add fw_env.config for openrd (Closes: #821056).
+ Thanks to Rick Thomas.
+ * u-boot-omap:
+ - Revert upstream patch changing the default offsets for loading
+ u-boot from eMMC.
+ * u-boot-exynos:
+ - Add odroid-xu3 target, tested on Odroid-XU4.
+ - Add patch from upstream with updated documentation about Odroid-XU4
+ target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 30 Apr 2016 18:53:04 -0700
+
+u-boot (2016.03+dfsg1-6) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * u-boot-tegra: Only install p2371-2180 symlink on arm64.
+ (Closes: #826905). Thanks to Martin Michlmayr for the report!
+ * Add patch to fix reproducibility issues with ld and some
+ locales. Thanks to HW42!
+
+ [ Martin Michlmayr ]
+ * Add NVIDIA to Tegra description
+ * u-boot-tegra.README.Debian: fix name of package
+ * u-boot-tegra.README.Debian: improve Jetson TK instructions.
+ (Closes: #827081).
+
+ [ Vagrant Cascadian ]
+ * Apply patch from upstream to fix volatages used on several OlinuXino
+ Lime board variants (Closes: #825214). Thanks to Karsten Merker for
+ tracking down the patch!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 28 Jun 2016 09:38:27 +0200
+
+u-boot (2016.03+dfsg1-5) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * Add patches from upstream to detect fdtfile on am57xx, and update
+ distro_bootcmd patch accordingly.
+ * u-boot-tools: Add fw_env.config for openrd (Closes: #821056). Thanks
+ to Rick Thomas.
+ * u-boot-omap: Add support for dra74_evm (Closes: #824730). Thanks to
+ Ben Hutchings.
+ * Added odroid-xu3 target, tested on Odroid-XU4.
+
+ [ Gerald Kerma ]
+ * Correct the guruplug.config to match the new upstream env address.
+ (Closes: #781873).
+
+ [ Vagrant Cascadian ]
+ * u-boot-exynos: Add patch to support distro_bootcmd on odroid target.
+
+ [ Martin Michlmayr ]
+ * u-boot-tegra: Add Jetson TX1 (P2371-2180) target (Closes: #825458).
+ * u-boot-tegra: Add arm64 arch.
+ * u-boot-tegra: Update README.Debian for Jetson TX1.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 29 May 2016 14:29:59 -0700
+
+u-boot (2016.03+dfsg1-4) unstable; urgency=medium
+
+ * Add patch to fix detected ram size on Firefly boards by reverting
+ "rockchip: rk3288: correct sdram setting".
+ * debian/control: Updated Standards-Version to 3.9.8, no changes needed.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 16 Apr 2016 15:33:22 -0700
+
+u-boot (2016.03+dfsg1-3) unstable; urgency=medium
+
+ * u-boot-omap:
+ - Remove ti-u-boot patches, which are no longer needed.
+ - Update am57xx support for distro bootcmd.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 04 Apr 2016 11:23:06 -0700
+
+u-boot (2016.03+dfsg1-2) unstable; urgency=medium
+
+ * Apply patch from upstream to fix gmac ethernet on sunxi
+ systems. (Closes: #818621). Thanks to Karsten Merker for the report.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 28 Mar 2016 19:52:45 -0700
+
+u-boot (2016.03+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+ * Remove Firefly-RK3288 patch applied upstream.
+ * debian/control:
+ - Update to use https for Vcs-Git and Vcs-Browser.
+ - Update to Standards-Version 3.9.7, no changes needed.
+ * Update lintian overrides to ignore a company named Synopsys listed in
+ debian/copyright, which is flagged as a misspelling.
+ * Add patches to fix mispellings for "comment", "supported" and
+ "transferred".
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 15 Mar 2016 14:53:55 -0700
+
+u-boot (2016.03~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Add patch submitted upstream to fix Firefly-RK3288 SPL by disabling
+ eMMC feature in SPL.
+ * u-boot-sunxi: Drop FEL targets, as moderm versions of sunxi-tools
+ support loading u-boot-sunxi-with-spl.bin directly.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 08 Mar 2016 13:28:50 -0800
+
+u-boot (2016.03~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream.
+ * Refresh patches:
+ - Makefile-add-kwb-target-to-all.patch
+ - 0001-Makefile-Include-vendor-common-library-in-include-se.patch
+ - udoo_quad-support.patch
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 16 Feb 2016 15:01:48 -0800
+
+u-boot (2016.01+dfsg1-2) unstable; urgency=medium
+
+ * u-boot-omap:
+ - Include patches from ti-u-boot to support AM57xx boards.
+ - Add patch for AM57xx boards to boot using distro bootcmd.
+ - Add am57xx_evm target, used by the BeagleBoard-X15.
+ * Apply patches from upstream to fix OpenRD builds with
+ GCC-5. Thanks to Albert ARIBAUD. (Closes: #811129)
+ * u-boot-imx: Apply patch "wandboard: fix variable name so PXE boot
+ works" from upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 08 Feb 2016 20:14:04 -0800
+
+u-boot (2016.01+dfsg1-1) unstable; urgency=medium
+
+ * u-boot-sunxi: Enable orangepi_plus target.
+ * Remove patch Switching novena to config_distro_bootcmd, applied
+ upstream.
+ * armel: Enable openrd_base, openrd_client and openrd_ultimate
+ targets. Thanks to Albert ARIBAUD, Rick Thomas and Philip Hands for
+ testing. (Closes: #810790)
+ * Add Rick Thomas as a sheevaplug tester.
+ * sheevaplug: Update env documentation to default to current u-boot
+ offsets. (Closes: #781874)
+ * Bump versioned dependencies on debhelper and dpkg-dev to support use
+ of build profiles.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 12 Jan 2016 11:48:34 -0800
+
+u-boot (2016.01~rc3+dfsg1-3) experimental; urgency=medium
+
+ * u-boot-rockchip: Generate rksd images.
+ * u-boot-rockchip: Build u-boot-dtb.img instead of u-boot.img.
+ * Add u-boot-rpi package for Raspberry pi systems:
+ - [armel] Include rpi target.
+ - [armhf] Add rpi_2 target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 02 Jan 2016 15:19:11 -0800
+
+u-boot (2016.01~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ - Fixes eMMC boot selection on BeagleBone Black.
+ * Add patch to fix missing bootdelay on am335x.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 22 Dec 2015 18:20:52 -0800
+
+u-boot (2016.01~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate:
+ - Remove patches applied upstream.
+ - Refresh patches:
+ + arndale/board-spl-rule.diff
+ + beagleboneblack/usb-mass-storage.patch
+ + 0001-arm-novena-Switch-novena-to-config_distro_bootcmd.patch
+
+ * u-boot-tools:
+ - Install man page for kwboot.
+ - Add dumpimage command (Closes: #807174).
+ - strip mkenvimage.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 12 Dec 2015 19:00:32 -0800
+
+u-boot (2015.10+dfsg1-4) unstable; urgency=medium
+
+ * Fix reproducibility issue with targets listed in package descriptions
+ by always sorting using C locale.
+ * u-boot-imx: Updates to novena patches:
+ - Sync with submitted patch for distro_bootcmd support.
+ - Add upstream patch to fix USB support.
+ - Add upstream patch to enable loading u-boot.img from EXT
+ filesystems.
+ * Add upstream patches to fix mkimage support for multi and script
+ images (Closes: #805434).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 08 Dec 2015 08:59:47 -0800
+
+u-boot (2015.10+dfsg1-3) unstable; urgency=medium
+
+ * u-boot-install-targets: Add support to install documentation.
+ * u-boot-exynos: Install README.odroid.
+ * u-boot-rockchip: Install README.rockchip.
+ * u-boot-omap: Install README.nokia_rx51.
+ * Add included platforms to u-boot package descriptions.
+ * u-boot-sunxi: Enable the A10s-OLinuXino-M target. Thanks to Benedikt
+ Wildenhain (Closes: #806151).
+ * u-boot-imx: Add novena patches to include fdtfile variable, and load
+ fdt file into correct address.
+ * u-boot-sunxi: Backport patches from upstream to enable the Lamobo_R1
+ target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 24 Nov 2015 14:14:29 -0800
+
+u-boot (2015.10+dfsg1-2) unstable; urgency=medium
+
+ * Add missing content to u-boot-rockchip package.
+ * Update wandboard and mx6cuboxi patches to use config_distro_bootcmd
+ patches from u-boot-imx.
+ * Patch mx6cuboxi to specify the baudrate in the console setting.
+ * Update BeagleBone Black patches to use config_distro_bootcmd from
+ upstream.
+ * Patch to switch novena to use distro_bootcmd.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 14 Nov 2015 09:22:47 -0600
+
+u-boot (2015.10+dfsg1-2~exp1) experimental; urgency=medium
+
+ * Build rockchip package, with firefly-rk3288 as the initial
+ target. Thanks to Emilio Pozuelo Monfort and Sjoerd Simons.
+ (Closes: #803166).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 02 Nov 2015 07:59:36 -0800
+
+u-boot (2015.10+dfsg1-1) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * New upstream version.
+ * Remove patch to fix variation caused by timezone differences, applied
+ upstream.
+ * Add patch to use a relative path to include the sunxi spl header,
+ which allows mksunxiboot to build on any architecture. Thanks to Ian
+ Campbell for the initial patch!
+ * Add patch from upstream to fix non-Android booting with ramdisk and/or
+ device tree.
+
+ [ Karsten Merker ]
+ * u-boot-sunxi: Enable the A20-Olimex-SOM-EVB target (Closes: #803335).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 29 Oct 2015 13:35:23 -0700
+
+u-boot (2015.10~rc4+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release candidate.
+ * Updated udoo patches and debian/targets, upstream switched to a single
+ target that supports both udoo quad and dual.
+ * u-boot-sunxi: Add Linksprite_pcDuino target (Closes: #799035). Thanks
+ to Robert Hegner for testing!
+ * Refreshed patches for beaglebone black.
+ * Add patch to fix build variation based on timezone, by removing call
+ to "mktime".
+ * debian/copyright: Updated new locations for exynos files.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 30 Sep 2015 12:00:30 -0700
+
+u-boot (2015.10~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Install mkenvimage. Patch from Ubuntu.
+ * Refreshed patches for arndale, beaglebone black, and mx53loco.
+ * Remove reproducibility patch, applied upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 01 Sep 2015 17:10:40 -0500
+
+u-boot (2015.07+dfsg1-1) unstable; urgency=medium
+
+ [ Jochen Sprickerhof ]
+ * u-boot-sunxi: enable Mini-X target (Closes: #787266).
+
+ [ Ian Campbell ]
+ * Add support for Tegra Jetson TK-1 (Closes: #788689)
+
+ [ Vagrant Cascadian ]
+ New upstream version:
+ * mx6cuboxi:
+ - Remove patches applied upstream.
+ - Refresh distro bootcmd patch.
+ * wandboard:
+ - Remove wandboard SPL patch, applied upstream.
+ - Refresh distro bootcmd patch.
+ * beagleboneblack:
+ - Refresh distro bootcmd patch.
+ * udoo_quad:
+ - Refresh support patch.
+ * Drop no-error-on-set-but-unused-variable patch, no longer relevent.
+ * Add patch to ensure that CONFIG_SANDBOX is set when running "make env".
+
+ * Use patch applied upstream to use SOURCE_DATE_EPOCH when set.
+ * debian/rules: Use the Date from debian/changelog to set
+ SOURCE_DATE_EPOCH.
+
+ * Add example fw_env.config for mx6cuboxi (Closes: #786877).
+ * Add example fw_env.config for wandboard.
+
+ * Add Build-Depends on dpkg-dev (>= 1.17.0), as debian/rules uses
+ "dpkg-parsechangelog --show-field" introduced in that
+ version. (Closes: #768099).
+
+ * debian/watch: Update to use ftp server.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 01 Aug 2015 07:29:07 -0700
+
+u-boot (2015.04+dfsg1-2) unstable; urgency=medium
+
+ [ Joost van Zwieten ]
+ * u-boot-exynos: Enable odroid target.
+
+ [ Vagrant Cascadian ]
+ * u-boot-imx/mx6cuboxi:
+ + Add patches to enable HDMI and USB support.
+ + Add patches to fix Ethernet PHY detection.
+ * u-boot-imx/wandboard: Add patch from u-boot-imx to build a single SPL
+ target for all variants.
+
+ [ Robert Nelson ]
+ * u-boot-omap: Include u-boot.img instead of u-boot.bin for igep0020,
+ omap3_beagle and omap4_panda.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 25 May 2015 20:36:37 -0700
+
+u-boot (2015.04+dfsg1-1) experimental; urgency=medium
+
+ [ Ian Campbell ]
+ * u-boot-exynos: Fix conflict between arndale and sunxi spl
+ targets.
+ * u-boot-sunxi: Update sunxi FEL target.
+
+ [ Vagrant Cascadian ]
+ * u-boot-imx:
+ + Add usbarmory target.
+ + Add novena target.
+ + Add patches from u-boot-imx to support Cubox-i and Hummingboard and
+ drop old cubox-i patches.
+ + Add mx6cuboxi target.
+ + mx6cuboxi: Add patch to use config_distro_bootcmd.
+ + wandboard: Add patch to use config_distro_bootcmd and remove old
+ environment patches.
+
+ * u-boot-omap:
+ + am335x_boneblack: Remove patch to set voltage.
+ + am335x_boneblack: Add patch to use config_distro_bootcmd and remove
+ old patches.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 27 Apr 2015 14:54:44 -0700
+
+u-boot (2015.04~rc5+dfsg1-1) experimental; urgency=medium
+
+ [ John Paul Adrian Glaubitz ]
+ * [sh4] Fix FTBFS due to incorrect target names (Closes: #780066).
+
+ [ Vagrant Cascadian ]
+ * [armel] Use "rpi" for the Raspberry pi target, as it was renamed
+ upstream.
+ * [armel] Remove openrd_ultimate target, which fails to build upstream.
+ * [armel] Remove obsolete mmc guruplug and openrd patches.
+ * [armhf] Remove arndale patches, applied upstream.
+ * Fix cross-building of u-boot-tools (Closes: #775614).
+ * [armhf] u-boot-sunxi: Enable A20-OLinuXino_MICRO. Thanks to Arne
+ Ploese for testing!
+ * [armhf] u-boot-sunxi: Enable Linksprite_pcDuino3. Thanks to Patrice Go
+ for testing!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 07 Apr 2015 13:58:39 -0700
+
+u-boot (2015.04~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream:
+ - ti_armv7_common-support_raw_initrd.diff
+ * Refresh patches:
+ - cubox-i/cubox-i-support.diff
+ - mipsel-native-endianness.diff
+ - mx53loco
+ - openrd-mmc.diff
+ - series
+ - wandboard/wandboard-uEnv.txt-bootz-n-fixes.patch
+ - guruplug_mvfs_and_mmc.diff
+ * Add patch to enable USB mass-storage support for the BeagleBone Black:
+ - beagleboneblack/usb-mass-storage.patch
+ * debian/rules: Add get-orig-source target.
+
+ * Disable patches that fail to apply:
+ - cubox-i/imx6-spl-support.diff
+ - arndale/exynos-Enable-config_distro_defaults.h.patch
+ - arndale/exynos5-Use-config_distro_bootcmd.h.patch
+ * Disable cubox-i build target and patches, as it fails to build.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 08 Mar 2015 12:15:59 -0700
+
+u-boot (2014.10+dfsg1-5) unstable; urgency=medium
+
+ [ John Paul Adrian Glaubitz ]
+ * [sh4] Fix FTBFS due to incorrect target names (Closes: #780066).
+
+ [ Vagrant Cascadian ]
+ * [armhf] u-boot-sunxi: Enable A20-OLinuXino_MICRO. Thanks to Arne
+ Ploese for testing!
+ * [armhf] u-boot-sunxi: Enable Linksprite_pcDuino3. Thanks to Patrice Go
+ for testing!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 07 Apr 2015 13:42:30 -0700
+
+u-boot (2014.10+dfsg1-4) unstable; urgency=medium
+
+ [ Karsten Merker ]
+ * Backport support for the LeMaker Banana Pro board (Closes: #779908).
+
+ [ Vagrant Cascadian ]
+ * Update lintian rules for BananaPro and A20-OlinuXino-LIME2.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 08 Mar 2015 11:13:07 -0700
+
+u-boot (2014.10+dfsg1-3) unstable; urgency=medium
+
+ * cubox-i-support.diff: Refresh patch, dropping solidrun.bmp, which
+ causes FTBFS with newer version of patch (Closes: #777518).
+
+ * Add patch to support A20-OLinuXino-LIME2, backported from u-boot
+ 2015.01. Thanks to Karsten Merker for the patch (Closes: #777466).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 21 Feb 2015 13:13:31 -0800
+
+u-boot (2014.10+dfsg1-2.1) unstable; urgency=medium
+
+ * Non-maintainer upload.
+ * debian/patches:
+ - Add sh4-fix-linker-name-prefix.patch to use the proper
+ linker name prefix on sh4. Fixes FTBFS. (Closes: #771747)
+
+ -- John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Thu, 11 Dec 2014 00:00:08 +0100
+
+u-boot (2014.10+dfsg1-2) unstable; urgency=medium
+
+ [ Steve Langasek ]
+ * Resync cubox-i patches with github.
+ - fixes support for booting on the cubox-i2ultra/i2ex.
+ (Closes: #766266)
+
+ [ Vagrant Cascadian ]
+ * wandboard, cubox-i: Add patches to use variables expected by
+ debian-installer bootscript.
+ * cubox-i: Move importing bootenv before loading the boot script, to
+ allow environment variables useful to the boot script to be set.
+ * cubox-i: Run autodetectfdt before attempting to load the boot script.
+ * Split README.Debian by subarchitecture, and document installing u-boot
+ on several additional boards.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 01 Nov 2014 16:33:33 -0700
+
+u-boot (2014.10+dfsg1-1) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * New upstream release.
+ * Refresh cubox-i patches to 2014.10.
+ * Update cubox-i patches to use generic board.
+ * Remove debian/patches/kerma-sheevaplug-mvsata.diff, merged upstream.
+ * Patch to allow tools-only to build without a configuration.
+ * Update Standards-Version to 3.9.6, no changes needed.
+
+ [ Ian Campbell ]
+ * Rebase arndale patches onto 2014.10
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 19 Oct 2014 11:34:39 -0700
+
+u-boot (2014.10~rc3+dfsg1-2) experimental; urgency=medium
+
+ [ Ian Campbell ]
+ * Add support for the Arndale board (Closes: #763186).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 09 Oct 2014 11:41:31 -0700
+
+u-boot (2014.10~rc3+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream:
+ - bootcmd-scsi-scan-before-scsi.patch
+ - sunxi/0001-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch
+ * Refresh patches:
+ - am335x-bootscript.diff
+ - am335x-uenv.txt.diff
+ - cubox-i/cubox-i-support.diff
+ - no-force-CROSS_COMPILE-powerpc.diff
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 08 Oct 2014 09:57:35 -0700
+
+u-boot (2014.10~rc2+dfsg1-2) unstable; urgency=medium
+
+ [ Héctor Orón Martínez ]
+ * Fix cross building.
+ * Build extra tools for kirkwood and sunxi (Closes: #750108).
+ * Build extra tools and env just once, and install in PATH again.
+ * Add nitrogen6q support to u-boot-imx.
+
+ [ Vagrant Cascadian ]
+ * Use "make all" instead of making individual targets, recording a list
+ of targets to install in each subarch package.
+ * Build FEL variants for all sunxi platforms, based on patches from Ian
+ Campbell.
+ * Add build-depends on "bc".
+ * Patch to add the debian revision to the U-boot version.
+ * Updated cubox-i patches and re-enable mx6_cubox-i target.
+ * Build tools and env with NO_SDL=1 to avoid complaining about missing
+ sdl-config.
+ * Remove mips target dbau1100, an old platform with no testers.
+ * Swich qemu_mips target to install u-boot.bin, which is what is
+ actually needed by qemu.
+ * Add patch to Set DCDC1 DDR3 to 1.35V for Beaglebone Black. Thanks to
+ Robert Nelson for the patch.
+
+ [ Ian Campbell ]
+ * Add patch to add u-boot.kwb to "make all" on Kirkwood platforms.
+ * Build tools out-of-tree too so as not to dirty the source used for the
+ actual platforms (Closes: #763024).
+ * Add patch to initialize scsi before trying scsi disks in
+ config_distro_bootcmd (Closes: #764069).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 06 Oct 2014 16:58:04 -0700
+
+u-boot (2014.10~rc2+dfsg1-2~exp1) experimental; urgency=medium
+
+ * Split u-boot package into u-boot-imx, u-boot-omap and u-boot-sunxi
+ packages on armhf.
+
+ * debian/targets:
+ - Enable A10-OLinuXino-Lime target.
+ - Enable Cubieboard2 and Cubieboard2_FEL targets (Closes: #762383).
+ - Enable A20-OLinuXino-LIME target.
+ - Disable mx6_cubox-i
+ - Disable efikamx and efikasb.
+
+ * debian/patches:
+ - Add patch from upstream to support A20-OLinuXino-LIME.
+ - Disable patches for cubox-i.
+
+ * debian/rules:
+ - Remove excess conditional architecture check, drop build-dep on
+ dctrl-tools.
+ - Remove executable bit from u-boot targets.
+
+ * Updated lintian overrides.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 22 Sep 2014 18:30:12 -0500
+
+u-boot (2014.10~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+
+ * Update debian/patches:
+ - Remove Cubieboard and Cubietruck patches, applied upstream.
+ - Remove kerma-sheevaplug-mvsdio patch, applied upstream.
+ - Update openrd-mmc patch, partially applied upstream.
+ - Add patch to workaround failure when building env tools.
+
+ * [armhf] Add Bananapi target.
+
+ * debian/rules:
+ - Install fw_printenv and fw_setenv symlink in platform-specific dir.
+ - Create include/config/auto.conf to allow tools-only target to build.
+ - Update to use defconfig target rather than config target.
+
+ * debian/copyright:
+ - Update Files-Excluded as some files were removed upstream.
+
+ * Updated lintian overrides.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 03 Sep 2014 23:28:59 -0700
+
+u-boot (2014.07+dfsg1-2) unstable; urgency=medium
+
+ [ Steve Langasek ]
+ * Rebase cubox-i patches on 2014.07 and re-enable the target.
+
+ [ Vagrant Cascadian ]
+ * Switch to debhelper 9 with executable .install files.
+ * Remove the efikamx and efikasb targets.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 14 Sep 2014 23:01:50 -0500
+
+u-boot (2014.07+dfsg1-1) unstable; urgency=medium
+
+ * New upstream version.
+ * [armhf] Temporarily disable cubox-i target, which needs re-working for
+ new upstream version.
+ * Refresh Cubietruck and Cubieboard patches.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 28 Aug 2014 12:22:06 -0700
+
+u-boot (2014.07~rc4+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Updated patches for sheevaplug MMC and SATA support.
+ * Updated openrd patches to use MMC driver.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 12 Jul 2014 17:24:51 -0700
+
+u-boot (2014.04+dfsg1-3) unstable; urgency=medium
+
+ * Add patch for mx53loco that enables support for ext4, the "load" command,
+ and using bootz with raw initrds.
+ * Remove ZUMA platform and drop powerpc from u-boot architectures
+ (Closes: #754610).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 28 Jul 2014 15:30:26 -0700
+
+u-boot (2014.04+dfsg1-2) unstable; urgency=medium
+
+ * Enable udoo_quad target, with patch improving the udoo_quad boot
+ environment. Thanks to Michael Fladischer! (Closes: #753376).
+ * Enable Cubieboard target and patches.
+ * Update lintian overrides.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 09 Jul 2014 12:37:12 -0700
+
+u-boot (2014.04+dfsg1-1) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * Repack upstream tarball to remove files containing firmware without
+ sources (Closes: #750912).
+
+ * Add patches for Cubietruck from upstream.
+ * Add Cubietruck and Cubietruck_FEL targets (Closes: #750473).
+
+ * Add support for bootscripts to BeagleBone Black.
+ - Support loading files from either first or second partition.
+
+ * Modified wandboard patches:
+ - Add support for bootscripts.
+ - Support both fat and ext filesystems by consistantly using the "load"
+ command.
+ - Try loading bootscript from /boot/ as a fallback if not found in /.
+
+ * Update debian/copyright to use copyright format 1.0.
+ - Document which files are removed in debian/copyright.
+ * Update debian/watch to handle +dfsg version.
+ * Update lintian overrides:
+ - Ignore 'u-boot: statically-linked-binary'.
+ - Include new u-boot targets.
+
+ [ Andreas Henriksson ]
+ * Add patches for sunxi AHCI driver (Cubietruck) (Closes: #750473).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 15 Jun 2014 21:03:40 -0700
+
+u-boot (2014.04-2) unstable; urgency=medium
+
+ * Fix FTBFS on powerpc by not setting CROSS_COMPILE when empty.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 26 May 2014 11:32:49 -0700
+
+u-boot (2014.04-1) unstable; urgency=low
+
+ [ Steve Langasek ]
+ * Patches taken from https://github.com/rabeeh/u-boot-imx6.git to support
+ the SolidRun CuBox-i series:
+ - debian/patches/spl-sata-support.diff:
+ Add support for SATA in SPL mode
+ - debian/patches/imx6-spl-support.diff:
+ Add support for SPL on i.MX6-based systems
+ - debian/patches/cubox-support.diff, tools/logos/solidrun.bmp:
+ Add support for the CuBox-i.
+ * Build the mx6_cubox-i target (Closes: #741127).
+
+ [ Vagrant Cascadian ]
+ * Add Nokia nokia_rx51 (n900) to targets to build.
+ - Patch n900 build to support bootz and raw initrds.
+ * debian/rules: Fix building of targets for v2014.04.
+ - Move fw_printenv creation into board-specific targets.
+ - Build target "tools-only".
+ - Drop special-casing of MLO, add MLO to debian/targets.
+ * debian/patches/cubox-i-raw-initrd.diff:
+ - Patch to support raw initrd on cubox-i.
+ * debian/watch: Use http.
+ * debian/control: Bump Standards-Version to 3.9.5, no changes needed.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 20 May 2014 10:04:56 -0700
+
+u-boot (2014.01-2) unstable; urgency=medium
+
+ * Set Maintainer to Vagrant Cascadian (Closes: #738446).
+ * Remove Micah Anderson from uploaders.
+ * Add Clint Adams <clint@debian.org> to uploaders.
+ * Use grep-dctrl to pull architecture list from debian/control, rather than
+ hardcoding architectures in debian/rules.
+ * u-boot-tools: Set architecture to linux-any (Closes: #730833).
+ * Build raspberry pi (rpi_b) image on armel.
+ - Patch to to enable EXT2/EXT4 support and raw initrds.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 04 Mar 2014 14:13:22 -0800
+
+u-boot (2014.01-1) unstable; urgency=low
+
+ * New upstream version.
+ * Updated patches.
+ * debian/watch: Update to catch -rc versions.
+ * debian/control: Update Vcs-* headers.
+ * u-boot-tools: Strip comment sections from mkimage and fw_printenv.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 11 Feb 2014 15:11:47 -0800
+
+u-boot (2013.10-3) unstable; urgency=low
+
+ * Move build of dbau1100 from mipsel to mips, which fixes FTBFS on mipsel,
+ due to dbau1100 being big-endian.
+ * Disable mipsel builds of u-boot, as it no longer has any targets.
+ * Add patch to specify default mmc partition to use when loading uEnv.txt
+ on BeagleBone Black.
+ * Add patch to support raw initrds on BeagleBone Black.
+ * Mark u-boot-tools as Multi-Arch: foreign.
+ * Mark u-boot as Multi-Arch: same.
+ * Update lintian overrides with list of current platforms.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 17 Nov 2013 00:09:32 -0800
+
+u-boot (2013.10-2) unstable; urgency=low
+
+ * debian/rules:
+ - Switch back to explicitly building the specified target.
+ - Allow building multiple targets per platform.
+ * debian/targets:
+ - Build the spl/u-boot-spl.bin target on several armhf platforms, which
+ generates the MLO file.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 21 Oct 2013 11:33:01 -0700
+
+u-boot (2013.10-1) unstable; urgency=low
+
+ * New upstream version (Closes: #667680, #726699).
+ - Update mipsel-native-endianness.diff
+ * debian/rules:
+ - Remove various tools/* files on clean target.
+ - Build each platform target and install MLO file if present.
+ (Closes: #687562).
+ - Support parallel builds using DEB_BUILD_OPTIONS=parallel=N.
+ * Enable BeagleBone Black and Wandboard platforms.
+ * Add patch to support uEnv.txt and directly loading zimage for Wandboard.
+ * Include env configs u-boot-tools examples (Closes: #631659, #636214).
+ * Only build u-boot on architectures which generate images (Closes: #635050).
+ * Drop i386 builds of u-boot, as the only target (eNET) was removed upstream.
+ * debian/control: Add myself to uploaders.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 20 Oct 2013 10:23:55 -0700
+
+u-boot (2013.01.01-4) unstable; urgency=low
+
+ * Upload to unstable.
+ * Drop transitional packages uboot-envtools and uboot-mkimage.
+
+ -- Clint Adams <clint@debian.org> Thu, 09 May 2013 21:41:25 -0400
+
+u-boot (2013.01.01-3) experimental; urgency=low
+
+ * Disable unnecessary JFFS2 on GuruPlug
+ * Disable MMC on GuruPlug, devices are not detected,
+ they show up as USB devices instead
+
+ -- Micah Anderson <micah@debian.org> Mon, 25 Mar 2013 22:56:32 -0400
+
+u-boot (2013.01.01-2) experimental; urgency=low
+
+ * More properly enable MMC on GuruPlug.
+ * Use new Efika target names.
+ * Bump to Standards-Version 3.9.4.
+
+ -- Clint Adams <clint@debian.org> Sun, 24 Mar 2013 21:59:03 -0400
+
+u-boot (2013.01.01-1) experimental; urgency=low
+
+ * New upstream version. closes: #699232.
+ - Drop strip-env-tools.diff (merged).
+ - Update kerma-sheevaplug-mvsdio.diff.
+ - Update mipsel-native-endianness.diff
+ * Enable CONFIG_SYS_MVFS and CONFIG_CMD_MMC for GuruPlug.
+
+ -- Clint Adams <clint@debian.org> Thu, 21 Mar 2013 14:21:33 -0400
+
+u-boot (2012.04.01-2) unstable; urgency=low
+
+ * Remove code duplication in kerma-sheevaplug-mvsdio.diff.
+ closes: #674230.
+
+ -- Clint Adams <clint@debian.org> Thu, 31 May 2012 21:04:49 -0400
+
+u-boot (2012.04.01-1) unstable; urgency=low
+
+ * New upstream version.
+ - Update mipsel-native-endianness.diff.
+ - Update no-error-on-set-but-unused-variables.diff (partially merged).
+ - Drop kirkwood_spi-irq_mask.diff (merged).
+ - Drop kirkwood-disable-l2c.diff (merged).
+
+ -- Clint Adams <clint@debian.org> Tue, 01 May 2012 18:07:19 -0400
+
+u-boot (2011.12-3) unstable; urgency=low
+
+ [ Jonathan Nieder ]
+ * kirkwood: disable L2 cache before Linux boot; thanks to Ian Campbell.
+ closes: #658904
+
+ [ Loïc Minier ]
+ * Add patch to strip env tools; sent to upstream mailing-list.
+
+ -- Loïc Minier <lool@debian.org> Sun, 11 Mar 2012 16:12:50 +0100
+
+u-boot (2011.12-2) unstable; urgency=low
+
+ [ Loïc Minier ]
+ * Build u-boot.imx for efikasb on armhf
+
+ [ Clint Adams ]
+ * Patch from Ian Campbell to fix Dreamplug breakage. closes: #655102.
+
+ -- Clint Adams <clint@debian.org> Sun, 08 Jan 2012 15:11:03 -0500
+
+u-boot (2011.12-1) unstable; urgency=low
+
+ * New upstream version.
+ - Drop build-timestamp_autogenerated.h-without-config.patch (merged).
+ - Drop ublimage-NAND-block-size-isn-t-set-at-build-time.patch (merged).
+ - Update kerma-sheevaplug-mvsdio.diff
+ - Update mipsel-native-endianness.diff
+ - Drop dreamplug-v8.patch (merged).
+
+ -- Clint Adams <clint@debian.org> Mon, 02 Jan 2012 17:49:39 -0500
+
+u-boot (2011.09-2) unstable; urgency=low
+
+ * Patch from Pino Toscano <pino@debian.org> to build on the Hurd.
+ closes: #648295.
+ * Drop gr_xc3s_1500 target.
+ * Add build-arch and build-indep targets to debian/rules.
+
+ -- Clint Adams <clint@debian.org> Tue, 15 Nov 2011 23:53:01 -0500
+
+u-boot (2011.09-1) unstable; urgency=low
+
+ [ Hector Oron ]
+ * Enable MX53LOCO platform.
+ * Update lintian overrides.
+
+ [ Loïc Minier ]
+ * Fix FTBFS on amd64 and allow `make tools` to succeed without
+ config.
+
+ [ Clint Adams ]
+ * New upstream version.
+ - Update kerma-sheevaplug-mvsdio.diff.
+ - Drop panda-default-console.diff (refactored).
+ - Replace dreamplug patches with Jason's v8.
+ * Add Buffalo Linkstation Mini env config from Benjamin Cama.
+
+ -- Clint Adams <clint@debian.org> Fri, 30 Sep 2011 21:22:23 -0400
+
+u-boot (2011.06-4) unstable; urgency=low
+
+ * Increase the USB non-bulk timeout by an order of magnitude.
+ May fix #635774.
+
+ -- Clint Adams <clint@debian.org> Sat, 06 Aug 2011 13:42:52 -0400
+
+u-boot (2011.06-3) unstable; urgency=low
+
+ * Add DreamPlug support.
+
+ -- Clint Adams <clint@debian.org> Sun, 24 Jul 2011 09:35:32 -0400
+
+u-boot (2011.06-2) unstable; urgency=low
+
+ * Use -Wno-error=unused-but-set-variable on i386.
+
+ -- Clint Adams <clint@debian.org> Sat, 02 Jul 2011 22:14:44 -0400
+
+u-boot (2011.06-1) unstable; urgency=low
+
+ * New upstream version.
+ * Fix i386 and mipsel builds.
+
+ -- Clint Adams <clint@debian.org> Sat, 02 Jul 2011 19:25:28 -0400
+
+u-boot (2011.06~rc3-1) unstable; urgency=low
+
+ * New upstream version.
+
+ -- Clint Adams <clint@debian.org> Sat, 02 Jul 2011 15:50:46 -0400
+
+u-boot (2011.06~rc2-2) unstable; urgency=low
+
+ * Fix mipsel endianness problem again.
+ * Try building gr_xc3s_1500 on sparc.
+
+ -- Clint Adams <clint@debian.org> Sat, 18 Jun 2011 10:13:53 -0400
+
+u-boot (2011.06~rc2-1) unstable; urgency=low
+
+ * New upstream version.
+ * Fix tools config selection.
+
+ -- Clint Adams <clint@debian.org> Tue, 14 Jun 2011 20:53:07 -0400
+
+u-boot (2011.06~rc1-1) unstable; urgency=low
+
+ * New upstream version.
+ - Update mipsel-native-endianness.diff
+ - Drop Drop-config.h-include-in-tools-imximage.h.diff (merged).
+ - Drop openrd-client-and-ultimate.diff (merged).
+ - Update openrd-mmc.diff (formerly openrd-mmc-mtd-fat.diff).
+ - Drop eNET-monitor_flash_len.diff (merged).
+ - Update snapshot.commit to 2011.06-rc1.
+ - Use the first target for each arch to build the tools, or
+ fake it on the other architectures.
+ * Only build efikamx image on armhf.
+
+ -- Clint Adams <clint@debian.org> Sat, 21 May 2011 11:04:30 -0400
+
+u-boot (2011.03-6) unstable; urgency=low
+
+ * Bump to Standards-Version 3.9.2.
+ * Tweak the u-boot-tools description.
+ * Drop igep0020, omap3_beagle, and omap4_panda targets from
+ armel; they are available on armhf.
+
+ -- Clint Adams <clint@debian.org> Tue, 26 Apr 2011 16:11:24 -0400
+
+u-boot (2011.03-5) unstable; urgency=low
+
+ [ Sebastian Reichel ]
+ * Add Pandaboard target. closes: #624123
+ * New patch to change default console on Pandaboard.
+
+ -- Clint Adams <clint@debian.org> Mon, 25 Apr 2011 15:36:16 -0400
+
+u-boot (2011.03-4) unstable; urgency=low
+
+ * Enable FAT, SD/MMC, MTD, JFFS, UBIFS support on OpenRD boards.
+
+ -- Clint Adams <clint@debian.org> Wed, 13 Apr 2011 18:05:36 -0400
+
+u-boot (2011.03-3) unstable; urgency=low
+
+ * Actually pass the right arch_number for OpenRD-Ultimate.
+
+ -- Clint Adams <clint@debian.org> Tue, 12 Apr 2011 14:28:20 -0400
+
+u-boot (2011.03-2) unstable; urgency=low
+
+ * Fix i386 FTBFS with eNET-monitor_flash_len.diff
+ * Add patch for OpenRD-Client and OpenRD-Ultimate.
+ * Drop openrd_base target and add openrd_ultimate target.
+
+ -- Clint Adams <clint@debian.org> Tue, 05 Apr 2011 15:56:43 -0400
+
+u-boot (2011.03-1) unstable; urgency=low
+
+ [ Loïc Minier ]
+ * Only try to build env tools when Linux MTD headers are present.
+ closes: #619673.
+
+ [ Clint Adams ]
+ * New upstream version.
+ - Drop fix-definition-of-global_data-struct.diff (now upstream).
+ - Drop EfikaMX-switch-to-MACH_TYPE_MX51_EFIKAMX.diff (upstream now).
+ - Drop sh-sh7785lcr-Fix-out-of-tree-building.diff (upstream now).
+ - Drop MIPS-dbau1x00-Remove-unused-flash-driver-stub.diff (upstream now).
+ - Drop x86-Align-config.mk-and-linker-scripts-with-other-ar.diff
+ (upstream now).
+ - Update snapshot.commit to 2011.03
+
+ -- Clint Adams <clint@debian.org> Fri, 01 Apr 2011 10:30:46 -0400
+
+u-boot (2011.03~rc1-4) experimental; urgency=low
+
+ * Add patch x86-Align-config.mk-and-linker-scripts-with-other-ar.
+ From upstream mailing-list; fixes x86 build (eNET).
+
+ -- Loïc Minier <lool@debian.org> Wed, 09 Feb 2011 14:51:01 +0100
+
+u-boot (2011.03~rc1-3) experimental; urgency=low
+
+ * Add debian/source/local-options
+ - unapply-patches: avoids committing patched tree after a build
+ - abort-on-upstream-changes: avoids creating a debian-changes-* patch
+ when building from a dirty tree
+ * Add patch MIPS-dbau1x00-Remove-unused-flash-driver-stub,
+ from u-boot-mipsel.git 17a990b55008fd79636e4880d9d10b7172ca87ce and also
+ sent to the upstream mailing-list; fixes build of dbau1x00 board by
+ removing board/dbau1x00/flash.c entirely, and hence fixes the build of
+ u-boot on mipsel.
+
+ -- Loïc Minier <lool@debian.org> Tue, 08 Feb 2011 16:49:05 +0100
+
+u-boot (2011.03~rc1-2) experimental; urgency=low
+
+ * New patch sh-sh7785lcr-Fix-out-of-tree-building; from upstream
+ e72f46787f44c1104a8df18511ab230b6072a1f0; fixes Debian sh4 build; thanks
+ Nobuhiro Iwamatsu; closes: #611873.
+
+ -- Loïc Minier <lool@debian.org> Mon, 07 Feb 2011 17:20:16 +0100
+
+u-boot (2011.03~rc1-1) experimental; urgency=low
+
+ * dpkg-shlibdeps usr/bin/* rather than just mkimage.
+ * uboot-mkimage's Section is utils.
+ * Allow overriding CROSS_COMPILE.
+ * New upstream release candidate.
+ - Merge commit v2011.03-rc1
+ - Update snapshot.commit to 2011.03-rc1
+ * Add EfikaMX support.
+ - Add patch EfikaMX-switch-to-MACH_TYPE_MX51_EFIKAMX from the upstream
+ mailing-list; fixes build on EfikaMX (EfikaMX: switch to
+ MACH_TYPE_MX51_EFIKAMX)
+ - Add patch Drop-config.h-include-in-tools-imximage.h from the upstream
+ mailing-list; fixes tools-all build of imximage.c.
+ - Build u-boot.imx for efikamx on armel.
+ * Refresh patch kerma-sheevaplug-mvsdio to fix fuzz.
+
+ -- Loïc Minier <lool@debian.org> Thu, 03 Feb 2011 13:13:14 +0100
+
+u-boot (2010.12-2) unstable; urgency=low
+
+ * Avoid calling dpkg-architecture if DEB_HOST_ARCH is set.
+ * Misc refactoring of debian/rules.
+ - Split per architecture list of platform and targets into
+ debian/targets.
+ - Actually use INSTALL_FILE/INSTALL_DIR/INSTALL_PROGRAM.
+ - Add support for cross-builds; these will currently lack tools.
+ - Build board-specific u-boot files in a separate build dir from the
+ generic tools
+ * Fix handling of -Wl,foo LDFLAGS; the upstream build passes LDFLAGS
+ directly to ld instead of calling gcc for linking; so instead of passing
+ -Wl,foo in LDFLAGS as in automake builds, one should set LDFLAGS to foo
+ directly; add a snippet to strip -Wl, from LDFLAGS; alternatively, we
+ could do as in other special packages like the kernel and simply unset
+ LDFLAGS entirely; closes: #607613.
+ * Install and compress upstream mkimage manpage; based on a patch by
+ Marcin Juszkiewicz.
+ * Add a dummy uboot-mkimage package for upgrades from squeeze; based on a
+ patch by Marcin Juszkiewicz; closes: #607618.
+ * Add new patch, fix-definition-of-global_data-struct, from the upstream
+ x86 maintainer; fixes build of eNET board which breaks u-boot's build on
+ i386; closes: #608801.
+ * Workaround an upstream bug in distclean by removing include/asm/proc and
+ /arch explicitly for now; patch was sent upstream.
+ * Don't repeat Section: in binary package.
+ * Add myself to Uploaders.
+ * Split tools in u-boot-tools package.
+ * Drop board-specific tools; these are too dangerous; only ship mkimage for
+ now.
+ * Add igep0020 and omap3_beagle builds on armel
+ * Update snapshot.commit to the 2010.12 release contents; this avoids a
+ pointless diff with the tarball.
+
+ -- Loïc Minier <lool@debian.org> Mon, 17 Jan 2011 22:43:41 +0100
+
+u-boot (2010.12-1) unstable; urgency=low
+
+ * New upstream version.
+ * Install more tools in preparation for splitting off a
+ u-boot-tools binary package.
+
+ -- Clint Adams <clint@gnu.org> Tue, 28 Dec 2010 17:03:44 -0500
+
+u-boot (2010.12~rc3-1) unstable; urgency=low
+
+ * New upstream release candidate.
+ * Add dockstar target.
+
+ -- Clint Adams <clint@gnu.org> Sun, 19 Dec 2010 09:45:42 -0500
+
+u-boot (2010.12~rc2-1) unstable; urgency=low
+
+ * New upstream release candidate.
+ * Add openrd_base target.
+
+ -- Clint Adams <clint@gnu.org> Sat, 04 Dec 2010 15:32:38 -0500
+
+u-boot (2010.09-2) unstable; urgency=low
+
+ * Enable ext2 commands on GuruPlug.
+ * Ship ELF files (for loading into RAM with OpenOCD).
+
+ -- Clint Adams <clint@gnu.org> Sat, 20 Nov 2010 18:20:40 -0500
+
+u-boot (2010.09-1) unstable; urgency=low
+
+ * New upstream release.
+
+ -- Clint Adams <schizo@debian.org> Wed, 29 Sep 2010 00:06:25 -0400
+
+u-boot (2010.09~rc2-1) unstable; urgency=low
+
+ * New upstrem release candidate.
+
+ -- Clint Adams <schizo@debian.org> Sun, 19 Sep 2010 14:20:52 -0400
+
+u-boot (2010.09~rc1-2) unstable; urgency=low
+
+ * Add patch from Gérald Kerma to add Sheevaplug mvsata support.
+ * Add patch from Gérald Kerma to add Sheevaplug mvsdio support.
+
+ -- Clint Adams <schizo@debian.org> Sun, 12 Sep 2010 11:48:22 -0400
+
+u-boot (2010.09~rc1-1) unstable; urgency=low
+
+ * New upstream release candidate.
+ - Drop guruplug-miiphy_reset.diff.
+ - Update mipsel-native-endianness.diff.
+ - Drop sh4-native-compile.diff.
+ * Bump to Standards-Version 3.9.1.
+
+ -- Clint Adams <schizo@debian.org> Sat, 11 Sep 2010 00:43:04 -0400
+
+u-boot (2010.06-1) unstable; urgency=low
+
+ * New upstream version.
+
+ -- Clint Adams <schizo@debian.org> Sat, 03 Jul 2010 13:49:46 -0400
+
+u-boot (2010.06~rc3-1) unstable; urgency=low
+
+ * New upstream version.
+ * Fix sh4-native-compile.diff to not break sh64, thanks to Paul
+ Mundt.
+ * Ship mkimage, conflict/replace uboot-mkimage, build on all
+ architectures.
+
+ -- Clint Adams <schizo@debian.org> Fri, 25 Jun 2010 14:49:06 -0400
+
+u-boot (2010.06~rc2-1) unstable; urgency=medium
+
+ * Add sh4-native-compile.diff from Aurelien Jarno. closes: #586026.
+ * New upstream version.
+ - Drop marvell-machtypes.diff.
+
+ -- Clint Adams <schizo@debian.org> Tue, 15 Jun 2010 21:37:26 -0400
+
+u-boot (2010.06~rc1-6) unstable; urgency=medium
+
+ * Add guruplug-miiphy_reset.diff.
+ * Clean between targets. closes: #585570.
+
+ -- Clint Adams <schizo@debian.org> Fri, 11 Jun 2010 21:57:31 -0400
+
+u-boot (2010.06~rc1-5) unstable; urgency=low
+
+ * Replace mipsel-native-endianness.diff with patch adapted
+ from a 2008 mailing list posting by Shinya Kuribayashi.
+
+ -- Clint Adams <schizo@debian.org> Fri, 04 Jun 2010 20:08:27 -0400
+
+u-boot (2010.06~rc1-4) unstable; urgency=low
+
+ * Add r2dplus target for sh4.
+ * mipsel-native-endianness.diff: don't force endianness on mips/mipsel
+
+ -- Clint Adams <schizo@debian.org> Thu, 03 Jun 2010 19:32:50 -0400
+
+u-boot (2010.06~rc1-3) unstable; urgency=low
+
+ * Fix mipsel typo.
+ * Apply patch from Nobuhiro Iwamatsu to change sh4 target board
+ from espt to sh7785lcr_32bit. closes: #584192.
+
+ -- Clint Adams <schizo@debian.org> Wed, 02 Jun 2010 08:25:04 -0400
+
+u-boot (2010.06~rc1-2) unstable; urgency=low
+
+ * Produce u-boot.bin on i386.
+ * Switch mipsel target to AMD DBAu1100.
+ * Add marvell-machtypes.diff.
+
+ -- Clint Adams <schizo@debian.org> Mon, 31 May 2010 22:09:29 -0400
+
+u-boot (2010.06~rc1-1) unstable; urgency=low
+
+ * Add Vcs-Git and Vcs-Browser headers.
+ * Add GuruPlug target (armel).
+ * Switch mipsel target to TB0229.
+ * Add watch file.
+ * Update README.Debian for SheevaPlug and GuruPlug.
+
+ -- Clint Adams <schizo@debian.org> Mon, 31 May 2010 19:29:40 -0400
+
+u-boot (2010.03-1) unstable; urgency=low
+
+ * Initial packaging. closes: #583605.
+
+ -- Clint Adams <schizo@debian.org> Fri, 28 May 2010 16:20:39 -0400
--- /dev/null
+Source: u-boot
+Section: admin
+Priority: optional
+Maintainer: Vagrant Cascadian <vagrant@debian.org>
+Uploaders: Loïc Minier <lool@debian.org>, Clint Adams <clint@debian.org>
+Build-Depends:
+ arm-trusted-firmware (>= 2.4+dfsg) [arm64],
+ bc,
+ bison,
+ debhelper-compat (= 13),
+ device-tree-compiler,
+ flex,
+ libfdt-dev:native [arm64],
+ libc6:arm64 [arm64] <cross !pkg.uboot.notools>,
+ libc6:armhf [armhf] <cross !pkg.uboot.notools>,
+ libc6:armel [armel] <cross !pkg.uboot.notools>,
+ libc6:riscv64 [riscv64] <cross !pkg.uboot.notools>,
+ libpython3-dev:native [linux-any],
+ libssl-dev,
+ python3:any [linux-any],
+ python3-distutils [linux-any],
+ python3-pkg-resources [linux-any],
+ swig [linux-any],
+ lzop [armhf],
+Build-Depends-Indep:
+# For u-boot-qemu targets
+ gcc-i686-linux-gnu [!i386],
+ gcc-arm-linux-gnueabihf [!armhf],
+ gcc-aarch64-linux-gnu [!arm64],
+ gcc-riscv64-linux-gnu [!riscv64],
+ gcc-x86-64-linux-gnu [!amd64],
+ gcc-powerpc-linux-gnu [!powerpc],
+Rules-Requires-Root: no
+Standards-Version: 4.5.1
+Homepage: https://www.denx.de/wiki/U-Boot/
+Vcs-Browser: https://salsa.debian.org/debian/u-boot
+Vcs-Git: https://salsa.debian.org/debian/u-boot.git
+
+Package: u-boot
+Architecture: armel armhf avr32 mips sh4
+Multi-Arch: same
+Depends: ${misc:Depends},
+ u-boot-imx [armhf], u-boot-omap [armhf], u-boot-sunxi [armhf], u-boot-exynos [armhf], u-boot-qemu [mips]
+Description: A boot loader for embedded systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ ${uboot:platforms}
+
+Package: u-boot-amlogic
+Architecture: arm64
+Multi-Arch: same
+Depends: ${misc:Depends}
+Recommends: arm-trusted-firmware [arm64]
+Description: A boot loader for amlogic systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various amlogic platforms.
+ ${uboot:platforms}
+
+Package: u-boot-imx
+Architecture: armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Breaks: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Replaces: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Description: A boot loader for imx systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various imx platforms.
+ ${uboot:platforms}
+
+Package: u-boot-qemu
+Architecture: all
+Depends: ${misc:Depends}
+Breaks: u-boot (<< 2019.01+dfsg-2)
+Replaces: u-boot (<< 2019.01+dfsg-2)
+Multi-Arch: foreign
+Description: A boot loader for qemu
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for qemu/kvm.
+ ${uboot:platforms}
+
+Package: u-boot-qcom
+Architecture: arm64
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for qcom systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various qcom platforms.
+ ${uboot:platforms}
+
+Package: u-boot-tegra
+Architecture: armhf arm64
+Multi-Arch: same
+Depends: ${misc:Depends}
+Breaks: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Replaces: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Description: A boot loader for NVIDIA Tegra systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various NVIDIA Tegra platforms.
+ ${uboot:platforms}
+
+Package: u-boot-omap
+Architecture: armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Breaks: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Replaces: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Description: A boot loader for omap systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various omap and related
+ platforms.
+ ${uboot:platforms}
+
+Package: u-boot-sunxi
+Architecture: armhf arm64
+Multi-Arch: same
+Built-Using: ${uboot:Built-Using}
+Depends: ${misc:Depends}
+Recommends: arm-trusted-firmware [arm64], u-boot-tools [arm64]
+Breaks: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Replaces: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Description: A boot loader for sunxi systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Allwinner/sunxi
+ platforms.
+ ${uboot:platforms}
+
+Package: u-boot-exynos
+Architecture: armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for exynos systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Exynos platforms.
+ ${uboot:platforms}
+
+Package: u-boot-mvebu
+Architecture: arm64
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for marvell systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Marvell platforms.
+ ${uboot:platforms}
+
+Package: u-boot-rockchip
+Architecture: armhf arm64
+Multi-Arch: same
+Built-Using: ${uboot:Built-Using}
+Depends: ${misc:Depends}
+Recommends: python3, arm-trusted-firmware [arm64], u-boot-tools [arm64]
+Description: A boot loader for rockchip systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Rockchip platforms.
+ ${uboot:platforms}
+
+Package: u-boot-rpi
+Architecture: armel armhf arm64
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for Raspberry PI systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Raspberry PI
+ platforms.
+ ${uboot:platforms}
+
+Package: u-boot-sifive
+Architecture: riscv64
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for SiFive systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various SiFive
+ platforms.
+ ${uboot:platforms}
+
+Package: u-boot-tools
+Architecture: linux-any
+Build-Profiles: <!pkg.uboot.notools>
+Multi-Arch: foreign
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Recommends: device-tree-compiler,
+ libubootenv-tool,
+Breaks: uboot-envtools (<< 20081215-3~),
+ uboot-mkimage (<= 0.4build1),
+ u-boot (<< 2010.12-2)
+Replaces: uboot-envtools (<< 20081215-3~),
+ uboot-mkimage (<= 0.4build1),
+ u-boot (<< 2010.12-2)
+Description: companion tools for Das U-Boot bootloader
+ This package includes programs for generating and listing U-Boot
+ images in various formats:
+ - mkimage
+ - dumpimage
+ - mksunxiboot
+ - mkenvimage
--- /dev/null
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: Das U-Boot
+Source: https://www.denx.de/wiki/U-Boot
+Files-Excluded:
+ drivers/dma/MCD_tasks.c
+
+Files: *
+Copyright: 2000-2013 Wolfgang Denk <wd@denx.de>
+ 1995-2002 Russell King
+ 1996-1998 Russell King
+ 1996-1999 Russell King
+ 1996-2000 Russell King
+ 1996 Russell King
+ 1997-1999 Russell King
+ 1999-2002 Vojtech Pavlik
+ 1999 Linus Torvalds / 2000-2002 Transmeta Corporation
+ 1999 Russell King
+ 2000-2002 Russell King
+ 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ 2001, 2002, 2003 / 2004 Gary Jennejohn garyj@denx.de
+ 2002-2007 Aleph One Ltd
+ 2002-2011 Aleph One Ltd
+ 2002 Thomas Gleixner (tglx@linutronix.de)
+ 2003 Kai-Uwe Bloem / 2000-2002 Transmeta Corporation / 1999 Linus Torvalds
+ 2004 by David Brownell
+ 2004 Nokia Corporation
+ 2004 Thomas Gleixner (tglx@linutronix.de)
+ 2005-2006 by Texas Instruments
+ 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation / 2006-2007 Nokia Corporation
+ 2005-2007 Samsung Electronics
+ 2005-2007 Samsung Electronics / Samsung Electronics, 2009 / Nokia Corporation, 2007
+ 2005-2008 Samsung Electronics
+ 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2006-2007 Nokia Corporation
+ 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2008-2009 MontaVista Software, Inc. <source@mvista.com> / 2006-2007 Nokia Corporation
+ 2005, Seagate Technology LLC / 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ 2006-2007 Nokia Corporation / 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation
+ 2006-2007 Nokia Corporation / 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments
+ 2006-2007 Nokia Corporation / 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ 2006, 2007 University of Szeged, Hungary / 2006-2008 Nokia Corporation
+ 2006-2008 Nokia Corporation
+ 2006,2009 Freescale Semiconductor, Inc
+ 2006-2009 Solarflare Communications Inc
+ 2006 Freescale Semiconductor, Inc
+ 2006 Nokia Corporation / 2005-2007 by Texas Instruments
+ 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> / 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> / 2009 Ilya Yanok, <yanok@emcraft.com>
+ 2006 Thomas Gleixner <tglx@linutronix.de>
+ 2007-2011 Freescale Semiconductor, Inc
+ 2007 Freescale Semiconductor, Inc
+ 2008-2009 / 2006-2008 Nokia Corporation
+ 2008-2009 Freescale Semiconductor, Inc
+ 2008-2009, MontaVista Software, Inc. <source@mvista.com> / 2010, by Texas Instruments
+ 2008,2009 STMicroelectronics / 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> / 2009 Alessandro Rubini <rubini@unipv.it>
+ 2008-2010 / 2006-2008 Nokia Corporation
+ 2008-2011 Freescale Semiconductor, Inc
+ 2008, 2011 Freescale Semiconductor, Inc
+ 2008,2011 Freescale Semiconductor, Inc
+ 2008-2012 Freescale Semiconductor, Inc
+ 2008 Altera Corporation / 2010 Thomas Chou <thomas@wytron.com.tw>
+ 2008 Atmel Corporation / 2013 Jagannadha Sutradharudu Teki, Xilinx Inc
+ 2008 by Texas Instruments / 2008 Mentor Graphics Corporation
+ 2008 Dave S.r.l. <www.dave.eu>
+ 2008 Extreme Engineering Solutions, Inc
+ 2008 Freescale Semiconductor, Inc
+ 2008 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> / 2004-2007 ARM Limited
+ 2008 Kim B. Heino / 2009
+ 2008 Qstreams Networks, Inc
+ 2008 Samsung Electronics / 2008-2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ 2008 STMicroelectronics / 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> / 2009 Alessandro Rubini <rubini@unipv.it>
+ 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ 2009-2010 eXMeritus, A Boeing Company / 2008-2009 Freescale Semiconductor, Inc
+ 2009-2010 Freescale Semiconductor, Inc
+ 2009-2010 Texas Instruments, Inc
+ 2009-2011 Freescale Semiconductor, Inc
+ 2009 coresystems GmbH
+ 2009 Freescale Semiconductor, Inc
+ 2009 Micrel Inc / 2011 Bticino s.p.a, Roberto Cerati <roberto.cerati@bticino.it>
+ 2009 MontaVista Software, Inc. <source@mvista.com> / 2006-2007 Nokia Corporation / 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation
+ 2010-2011 Freescale Semiconductor, Inc
+ 2010-2011 NVIDIA Corporation
+ 2010-2012 NVIDIA Corporation
+ 2010-2013 NVIDIA Corporation
+ 2010 Broadcom / 2012 Oleksandr Tymoshenko / 2012 Stephen Warren
+ 2010 NISHIMOTO Hiroki / 2010 Renesas Solutions Corp
+ 2010 Thomas Chou <thomas@wytron.com.tw>
+ 2010, Thomas Chou <thomas@wytron.com.tw>
+ 2010 Thomas Chou <thomas@wytron.com.tw> / 2008-2009 Avionic Design GmbH / 2007-2008 Avionic Design Development GmbH
+ 2010 Thomas Chou <thomas@wytron.com.tw> / 2008 Altera Corporation
+ 2011-2012 Renesas Solutions Corp
+ 2011 - 2012 Samsung Electronics / 2003-2006, Cluster File Systems, Inc, info@clusterfs.com
+ 2011 Analog Devices Inc
+ 2011 Freescale Semiconductor, Inc
+ 2011 Infineon Technologies
+ 2011 Ivan Djelic <ivan.djelic@parrot.com>
+ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 1995-2002 Russell King / 2010 Shawn Lin (nobuhiro@andestech.com)
+ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 1996-1998 Russell King / 2010 Shawn Lin (nobuhiro@andestech.com)
+ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 2010 Shawn Lin (nobuhiro@andestech.com)
+ 2011 Maxim Integrated Products
+ 2011 Parrot S.A
+ 2011 Renesas Solutions Corp
+ 2011 Renesas Solutions Corp / 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ 2011 The ChromiumOS Authors. All rights reserved
+ 2012-2013 Stephen Warren
+ 2012, by Texas Instruments
+ 2012, Google Inc
+ 2012 Renesas Solutions Corp
+ 2012 Samsung Electronics Co., Ltd
+ 2012 Stephen Warren
+ 2012 Texas Instruments Incorporated - http://www.ti.com/
+ 2013 Synopsys, Inc. (www.synopsys.com)
+License: GPL-2
+
+Files:
+ drivers/tpm/tpm_atmel_twi.c
+ drivers/gpio/tca642x.c
+ include/splash.h
+ include/linux/libfdt.h
+ include/configs/controlcenterd.h
+ include/configs/mxs.h
+ include/tca642x.h
+ board/gdsys/p1022/tlb.c
+ board/gdsys/p1022/sdhc_boot.c
+ board/gdsys/p1022/ddr.c
+ board/gdsys/p1022/controlcenterd-id.c
+ board/gdsys/p1022/diu.c
+ board/gdsys/p1022/controlcenterd-id.h
+ board/gdsys/p1022/controlcenterd.c
+ board/gdsys/p1022/law.c
+ board/gdsys/common/dp501.h
+ common/splash.c
+ fs/jffs2/compr_lzo.c
+ arch/arm/include/asm/arch-am33xx/hardware_ti816x.h
+ arch/arm/mach-exynos/dmc_init_exynos4.c
+ arch/arm/mach-exynos/lowlevel_init.c
+ arch/arm/mach-exynos/clock_init_exynos4.c
+ arch/arm/mach-exynos/common_setup.h
+ arch/arm/mach-omap2/am33xx/clock_ti816x.c
+Copyright:
+ 2013 Texas Instruments, Inc
+ 2013, Boundary Devices <info@boundarydevices.com>
+ 2006 David Gibson, IBM Corporation
+ 2012 Kim Phillips, Freescale Semiconductor
+ 2010-2013 Freescale Semiconductor, Inc
+ 2013 Marek Vasut <marex@denx.de>
+ 2010-2011 Freescale Semiconductor, Inc
+ 2004 Patrik Kluba
+ 1996-2002 Markus Franz Xaver Johannes Oberhumer
+ 2013 NVIDIA Corporation
+ 2011 The Chromium OS Authors
+ 2013 Samsung Electronics
+ 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ 2009, Texas Instruments, Incorporated
+License: GPL-2+
+
+Files: debian/*
+Copyright: Clint Adams <clint@debian.org>
+ Joey Hess <joeyh@debian.org>
+ Marc Singer <elf@debian.org>
+ Per Andersson <avtobiff@gmail.com>
+ Vagrant Cascadian <vagrant@debian.org>
+ Loïc Minier <lool@debian.org>
+ Adam Borowski <kilobyte@angband.pl>
+License: GPL-2+
+
+Files: fs/yaffs2/yaffs_allocator.h
+ fs/yaffs2/yaffs_verify.h
+ fs/yaffs2/yaffs_packedtags1.h
+ fs/yaffs2/yaffs_yaffs1.h
+ fs/yaffs2/ydirectenv.h
+ fs/yaffs2/yaffs_yaffs2.h
+ fs/yaffs2/yaffsfs.h
+ fs/yaffs2/yaffs_osglue.h
+ fs/yaffs2/yaffs_flashif.h
+ fs/yaffs2/yaffs_nand.h
+ fs/yaffs2/yportenv.h
+ fs/yaffs2/yaffs_packedtags2.h
+ fs/yaffs2/yaffs_attribs.h
+ fs/yaffs2/yaffs_ecc.h
+ fs/yaffs2/yaffs_trace.h
+ fs/yaffs2/yaffs_guts.h
+ fs/yaffs2/yaffs_getblockinfo.h
+ fs/yaffs2/yaffs_bitmap.h
+ fs/yaffs2/yaffs_nameval.h
+ fs/yaffs2/yaffscfg.h
+ fs/yaffs2/yaffs_nandemul2k.h
+ fs/yaffs2/yaffs_mtdif2.h
+ fs/yaffs2/yaffs_flashif2.h
+ fs/yaffs2/yaffs_checkptrw.h
+ fs/yaffs2/yaffs_tagscompat.h
+ fs/yaffs2/yaffs_nandif.h
+ fs/yaffs2/yaffs_summary.h
+ fs/yaffs2/yaffs_mtdif.h
+Copyright: Copyright (C) 2002-2011 Aleph One Ltd.
+License: LGPL-2.1
+
+Files: lib/sha1.c
+Copyright: Copyright (C) 2003-2006 Christophe Devine
+License: LGPL-2.1
+
+Files: include/bzlib.h
+ lib/bzip2/*
+Copyright: Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
+License: bzlib-BSD-3
+
+Files: drivers/usb/musb-new/musb_host.h
+ drivers/usb/musb-new/musb_core.h
+ drivers/usb/musb-new/musb_core.c
+ drivers/usb/musb-new/musb_gadget.c
+ drivers/usb/musb-new/musb_gadget.h
+ drivers/usb/musb-new/musb_dma.h
+ drivers/usb/musb-new/musb_regs.h
+ drivers/usb/musb-new/musb_debug.h
+ drivers/usb/musb-new/musb_host.c
+ drivers/usb/musb-new/musb_gadget_ep0.c
+ drivers/usb/musb-new/musb_io.h
+Copyright: Copyright 2005 Mentor Graphics Corporation
+ Copyright (C) 2005-2006 by Texas Instruments
+ Copyright (C) 2006-2007 Nokia Corporation
+ Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+License: GPL-2
+
+Files: net/dns.c
+ include/slre.h
+ lib/slre.c
+Copyright: 2008 Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
+ 2004-2005 Sergey Lyubka <valenok@gmail.com>
+ 2009 Robin Getz <rgetz@blackfin.uclinux.org>]
+License: Beerware
+
+Files: scripts/dtc/libfdt/*
+Copyright: 2006 David Gibson, IBM Corporation
+ 2012 Kim Phillips, Freescale Semiconductor
+License: libfdt-BSD-GPL
+
+License: libfdt-BSD-GPL
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+License: Beerware
+ "THE BEER-WARE LICENSE" (Revision 42):
+ Sergey Lyubka wrote this file. As long as you retain this notice you
+ can do whatever you want with this stuff. If we meet some day, and you think
+ this stuff is worth it, you can buy me a beer in return.
+
+License: GPL-2
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ version 2 as published by the Free Software Foundation.
+ .
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/GPL-2'.
+
+License: bzlib-BSD-3
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ .
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ .
+ 2. The origin of this software must not be misrepresented; you must
+ not claim that you wrote the original software. If you use this
+ software in a product, an acknowledgment in the product
+ documentation would be appreciated but is not required.
+ .
+ 3. Altered source versions must be plainly marked as such, and must
+ not be misrepresented as being the original software.
+ .
+ 4. The name of the author may not be used to endorse or promote
+ products derived from this software without specific prior written
+ permission.
+ .
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+ OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+License: GPL-2+
+ This program is free software; you can redistribute it
+ and/or modify it under the terms of the GNU General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later
+ version.
+ .
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ PURPOSE. See the GNU General Public License for more
+ details.
+ .
+ You should have received a copy of the GNU General Public
+ License along with this package; if not, write to the Free
+ Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+ Boston, MA 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/GPL-2'.
+
+License: LGPL-2.1
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License version 2.1 as
+ published by the Free Software Foundation.
+ .
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+ .
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ MA 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/LGPL-2.1'.
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd1 0x00000 0x10000 0x01000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd1 0x0 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x3F000 0x1000 0x1000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundand
+# environment sector is assumed present.
+
+# for Buffalo Linkstation Mini
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x3f000 0x01000 0x01000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x3F000 0x1000 0x1000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x30000 0x10000 0x10000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd4 0x360000 0x10000 0x10000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mmcblk0 0x80000 0x2000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR.
+
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd1 0x0000 0x4000 0x4000 2
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR.
+
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd2 0x0000 0x40000 0x20000 2
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+# Legacy u-boot versions:
+#/dev/mtd0 0xa0000 0x20000 0x20000
+
+# New u-boot versions:
+/dev/mtd0 0x60000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd5 0x00000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd4 0x0000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# This config is for QNAP TS-119, TS-219 and TS-219P boards.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd4 0x0000 0x1000 0x40000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+# Legacy u-boot versions:
+#/dev/mtd0 0x60000 0x20000 0x20000
+
+# New u-boot versions:
+/dev/mtd0 0x80000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mmcblk0 0xC0000 0x2000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mmcblk0 0x60000 0x2000
--- /dev/null
+[DEFAULT]
+upstream-branch = upstream/bullseye
+debian-branch = debian/bullseye
+patch-numbers = false
--- /dev/null
+.TH u-boot-install-sunxi 8 2021-01-07 u-boot
+.SH NAME
+u-boot-install-sunxi \- install u-boot for sunxi (Allwinner) devices
+.SH SYNOPSIS
+.B u-boot-install-sunxi
+.RI [ -f ]
+.I card-device-or-image-file
+.SH DESCRIPTION
+This tool installs a u-boot image to the disk (or possibly a disk
+image), allowing the machine to boot. The u-boot image is written to
+an area between the partition table and the first partition; there is
+no check if it's large enough \(em some ancient fdisk tools used to
+reserve only 31KB there, which can result in data loss.
+.PP
+The device will usually be
+.I /dev/mmcblk0
+for SD card,
+.I /dev/mmcblk1
+for eMMC,
+.I /dev/sdX
+for USB SD card readers (be careful wrt your other disks!).
+.PP
+By default, the path where
+.I .dtb
+and
+.I .bin
+files are copied from is a subdirectory of
+.I /usr/lib/u-boot
+deduced from the current running system, but if the
+.RB $ TARGET
+environment variable is set, its contents are used instead.
+.SH OPTIONS
+.TP
+-f | --force
+Skip partition table sanity checks. Usually, a MBR partition table is
+required (so u-boot has something to work with), but in rare setups you
+may put the data on another disk. Likewise, GPT partition tables are
+incompatible with the layout used on sunxi devices (spl is written at
+offset 16384 while GPT occupies bytes [512..33280) ) but this option lets
+you trample upon them anyway.
--- /dev/null
+From: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
+Date: Thu, 3 Nov 2022 09:37:48 +0530
+Subject: [PATCH] usb: gadget: dfu: Fix the unchecked length field
+
+DFU implementation does not bound the length field in USB
+DFU download setup packets, and it does not verify that
+the transfer direction. Fixing the length and transfer
+direction.
+
+CVE-2022-2347
+
+Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
+Reviewed-by: Marek Vasut <marex@denx.de>
+
+Note (<dleidert>: I'm not sure if this patch should be applied as well:
+https://source.denx.de/u-boot/u-boot/-/commit/86b6a38863bebb70a65a53f93a1ffafc4a472169
+
+It is not related to the issue, though.
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/fbce985e28eaca3af82afecc11961aadaf971a7e
+Bug: https://www.openwall.com/lists/oss-security/2022/07/08/2
+Bug-Debian: https://bugs.debian.org/1014959
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2022-2347
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2022-2347
+---
+ drivers/usb/gadget/f_dfu.c | 54 ++++++++++++++++++++++++++++++----------------
+ 1 file changed, 35 insertions(+), 19 deletions(-)
+
+diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c
+index 4bedc7d..ff1dd2b 100644
+--- a/drivers/usb/gadget/f_dfu.c
++++ b/drivers/usb/gadget/f_dfu.c
+@@ -321,21 +321,27 @@ static int state_dfu_idle(struct f_dfu *f_dfu,
+ u16 len = le16_to_cpu(ctrl->wLength);
+ int value = 0;
+
++ len = len > DFU_USB_BUFSIZ ? DFU_USB_BUFSIZ : len;
++
+ switch (ctrl->bRequest) {
+ case USB_REQ_DFU_DNLOAD:
+- if (len == 0) {
+- f_dfu->dfu_state = DFU_STATE_dfuERROR;
+- value = RET_STALL;
+- break;
++ if (ctrl->bRequestType == USB_DIR_OUT) {
++ if (len == 0) {
++ f_dfu->dfu_state = DFU_STATE_dfuERROR;
++ value = RET_STALL;
++ break;
++ }
++ f_dfu->dfu_state = DFU_STATE_dfuDNLOAD_SYNC;
++ f_dfu->blk_seq_num = w_value;
++ value = handle_dnload(gadget, len);
+ }
+- f_dfu->dfu_state = DFU_STATE_dfuDNLOAD_SYNC;
+- f_dfu->blk_seq_num = w_value;
+- value = handle_dnload(gadget, len);
+ break;
+ case USB_REQ_DFU_UPLOAD:
+- f_dfu->dfu_state = DFU_STATE_dfuUPLOAD_IDLE;
+- f_dfu->blk_seq_num = 0;
+- value = handle_upload(req, len);
++ if (ctrl->bRequestType == USB_DIR_IN) {
++ f_dfu->dfu_state = DFU_STATE_dfuUPLOAD_IDLE;
++ f_dfu->blk_seq_num = 0;
++ value = handle_upload(req, len);
++ }
+ break;
+ case USB_REQ_DFU_ABORT:
+ /* no zlp? */
+@@ -424,11 +430,15 @@ static int state_dfu_dnload_idle(struct f_dfu *f_dfu,
+ u16 len = le16_to_cpu(ctrl->wLength);
+ int value = 0;
+
++ len = len > DFU_USB_BUFSIZ ? DFU_USB_BUFSIZ : len;
++
+ switch (ctrl->bRequest) {
+ case USB_REQ_DFU_DNLOAD:
+- f_dfu->dfu_state = DFU_STATE_dfuDNLOAD_SYNC;
+- f_dfu->blk_seq_num = w_value;
+- value = handle_dnload(gadget, len);
++ if (ctrl->bRequestType == USB_DIR_OUT) {
++ f_dfu->dfu_state = DFU_STATE_dfuDNLOAD_SYNC;
++ f_dfu->blk_seq_num = w_value;
++ value = handle_dnload(gadget, len);
++ }
+ break;
+ case USB_REQ_DFU_ABORT:
+ f_dfu->dfu_state = DFU_STATE_dfuIDLE;
+@@ -511,13 +521,17 @@ static int state_dfu_upload_idle(struct f_dfu *f_dfu,
+ u16 len = le16_to_cpu(ctrl->wLength);
+ int value = 0;
+
++ len = len > DFU_USB_BUFSIZ ? DFU_USB_BUFSIZ : len;
++
+ switch (ctrl->bRequest) {
+ case USB_REQ_DFU_UPLOAD:
+- /* state transition if less data then requested */
+- f_dfu->blk_seq_num = w_value;
+- value = handle_upload(req, len);
+- if (value >= 0 && value < len)
+- f_dfu->dfu_state = DFU_STATE_dfuIDLE;
++ if (ctrl->bRequestType == USB_DIR_IN) {
++ /* state transition if less data then requested */
++ f_dfu->blk_seq_num = w_value;
++ value = handle_upload(req, len);
++ if (value >= 0 && value < len)
++ f_dfu->dfu_state = DFU_STATE_dfuIDLE;
++ }
+ break;
+ case USB_REQ_DFU_ABORT:
+ f_dfu->dfu_state = DFU_STATE_dfuIDLE;
+@@ -593,6 +607,8 @@ dfu_handle(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+ int value = 0;
+ u8 req_type = ctrl->bRequestType & USB_TYPE_MASK;
+
++ len = len > DFU_USB_BUFSIZ ? DFU_USB_BUFSIZ : len;
++
+ debug("w_value: 0x%x len: 0x%x\n", w_value, len);
+ debug("req_type: 0x%x ctrl->bRequest: 0x%x f_dfu->dfu_state: 0x%x\n",
+ req_type, ctrl->bRequest, f_dfu->dfu_state);
+@@ -612,7 +628,7 @@ dfu_handle(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+ value = dfu_state[f_dfu->dfu_state] (f_dfu, ctrl, gadget, req);
+
+ if (value >= 0) {
+- req->length = value;
++ req->length = value > DFU_USB_BUFSIZ ? DFU_USB_BUFSIZ : value;
+ req->zero = value < len;
+ value = usb_ep_queue(gadget->ep0, req, 0);
+ if (value < 0) {
--- /dev/null
+From: Andrea zi0Black Cappa <zi0Black@protonmail.com>
+Date: Wed, 18 May 2022 16:30:08 +0000
+Subject: net: nfs: Fix CVE-2022-30767 (old CVE-2019-14196)
+
+This patch mitigates the vulnerability identified via CVE-2019-14196.
+
+The previous patch was bypassed/ineffective, and now the vulnerability
+is identified via CVE-2022-30767. The patch removes the sanity check
+introduced to mitigate CVE-2019-14196 since it's ineffective.
+filefh3_length is changed to unsigned type integer, preventing negative
+numbers from being used during comparison with positive values during
+size sanity checks.
+
+Signed-off-by: Andrea zi0Black Cappa <zi0Black@protonmail.com>
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/bdbf7a05e26f3c5fd437c99e2755ffde186ddc80
+Bug: https://lists.denx.de/pipermail/u-boot/2022-May/483952.htmll
+Bug-Debian: https://bugs.debian.org/1014471
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2022-30767
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2022-30767
+---
+ net/nfs.c | 4 +---
+ 1 file changed, 1 insertion(+), 3 deletions(-)
+
+diff --git a/net/nfs.c b/net/nfs.c
+index 70d0e08..3003f54 100644
+--- a/net/nfs.c
++++ b/net/nfs.c
+@@ -57,7 +57,7 @@ static ulong nfs_timeout = NFS_TIMEOUT;
+
+ static char dirfh[NFS_FHSIZE]; /* NFSv2 / NFSv3 file handle of directory */
+ static char filefh[NFS3_FHSIZE]; /* NFSv2 / NFSv3 file handle */
+-static int filefh3_length; /* (variable) length of filefh when NFSv3 */
++static unsigned int filefh3_length; /* (variable) length of filefh when NFSv3 */
+
+ static enum net_loop_state nfs_download_state;
+ static struct in_addr nfs_server_ip;
+@@ -578,8 +578,6 @@ static int nfs_lookup_reply(uchar *pkt, unsigned len)
+ filefh3_length = ntohl(rpc_pkt.u.reply.data[1]);
+ if (filefh3_length > NFS3_FHSIZE)
+ filefh3_length = NFS3_FHSIZE;
+- if (((uchar *)&(rpc_pkt.u.reply.data[0]) - (uchar *)(&rpc_pkt) + filefh3_length) > len)
+- return -NFS_RPC_DROP;
+ memcpy(filefh, rpc_pkt.u.reply.data + 2, filefh3_length);
+ }
+
--- /dev/null
+From: Fabio Estevam <festevam@denx.de>
+Date: Thu, 26 May 2022 11:14:37 -0300
+Subject: net: Check for the minimum IP fragmented datagram size
+
+Nicolas Bidron and Nicolas Guigo reported the two bugs below:
+
+"
+----------BUG 1----------
+
+In compiled versions of U-Boot that define CONFIG_IP_DEFRAG, a value of
+`ip->ip_len` (IP packet header's Total Length) higher than `IP_HDR_SIZE`
+and strictly lower than `IP_HDR_SIZE+8` will lead to a value for `len`
+comprised between `0` and `7`. This will ultimately result in a
+truncated division by `8` resulting value of `0` forcing the hole
+metadata and fragment to point to the same location. The subsequent
+memcopy will overwrite the hole metadata with the fragment data. Through
+a second fragment, this can be exploited to write to an arbitrary offset
+controlled by that overwritten hole metadata value.
+
+This bug is only exploitable locally as it requires crafting two packets
+the first of which would most likely be dropped through routing due to
+its unexpectedly low Total Length. However, this bug can potentially be
+exploited to root linux based embedded devices locally.
+
+```C
+static struct ip_udp_hdr *__net_defragment(struct ip_udp_hdr *ip, int *lenp)
+{
+ static uchar pkt_buff[IP_PKTSIZE] __aligned(PKTALIGN);
+ static u16 first_hole, total_len;
+ struct hole *payload, *thisfrag, *h, *newh;
+ struct ip_udp_hdr *localip = (struct ip_udp_hdr *)pkt_buff;
+ uchar *indata = (uchar *)ip;
+ int offset8, start, len, done = 0;
+ u16 ip_off = ntohs(ip->ip_off);
+
+ /* payload starts after IP header, this fragment is in there */
+ payload = (struct hole *)(pkt_buff + IP_HDR_SIZE);
+ offset8 = (ip_off & IP_OFFS);
+ thisfrag = payload + offset8;
+ start = offset8 * 8;
+ len = ntohs(ip->ip_len) - IP_HDR_SIZE;
+```
+
+The last line of the previous excerpt from `u-boot/net/net.c` shows how
+the attacker can control the value of `len` to be strictly lower than
+`8` by issuing a packet with `ip_len` between `21` and `27`
+(`IP_HDR_SIZE` has a value of `20`).
+
+Also note that `offset8` here is `0` which leads to `thisfrag = payload`.
+
+```C
+ } else if (h >= thisfrag) {
+ /* overlaps with initial part of the hole: move this hole */
+ newh = thisfrag + (len / 8);
+ *newh = *h;
+ h = newh;
+ if (h->next_hole)
+ payload[h->next_hole].prev_hole = (h - payload);
+ if (h->prev_hole)
+ payload[h->prev_hole].next_hole = (h - payload);
+ else
+ first_hole = (h - payload);
+
+ } else {
+```
+
+Lower down the same function, execution reaches the above code path.
+Here, `len / 8` evaluates to `0` leading to `newh = thisfrag`. Also note
+that `first_hole` here is `0` since `h` and `payload` point to the same
+location.
+
+```C
+ /* finally copy this fragment and possibly return whole packet */
+ memcpy((uchar *)thisfrag, indata + IP_HDR_SIZE, len);
+```
+
+Finally, in the above excerpt the `memcpy` overwrites the hole metadata
+since `thisfrag` and `h` both point to the same location. The hole
+metadata is effectively overwritten with arbitrary data from the
+fragmented IP packet data. If `len` was crafted to be `6`, `last_byte`,
+`next_hole`, and `prev_hole` of the `first_hole` can be controlled by
+the attacker.
+
+Finally the arbitrary offset write occurs through a second fragment that
+only needs to be crafted to write data in the hole pointed to by the
+previously controlled hole metadata (`next_hole`) from the first packet.
+
+ ### Recommendation
+
+Handle cases where `len` is strictly lower than 8 by preventing the
+overwrite of the hole metadata during the memcpy of the fragment. This
+could be achieved by either:
+* Moving the location where the hole metadata is stored when `len` is
+lower than `8`.
+* Or outright rejecting fragmented IP datagram with a Total Length
+(`ip_len`) lower than 28 bytes which is the minimum valid fragmented IP
+datagram size (as defined as the minimum fragment of 8 octets in the IP
+Specification Document:
+[RFC791](https://datatracker.ietf.org/doc/html/rfc791) page 25).
+
+----------BUG 2----------
+
+In compiled versions of U-Boot that define CONFIG_IP_DEFRAG, a value of
+`ip->ip_len` (IP packet header's Total Length) lower than `IP_HDR_SIZE`
+will lead to a negative value for `len` which will ultimately result in
+a buffer overflow during the subsequent `memcpy` that uses `len` as it's
+`count` parameter.
+
+This bug is only exploitable on local ethernet as it requires crafting
+an invalid packet to include an unexpected `ip_len` value in the IP UDP
+header that's lower than the minimum accepted Total Length of a packet
+(21 as defined in the IP Specification Document:
+[RFC791](https://datatracker.ietf.org/doc/html/rfc791)). Such packet
+would in all likelihood be dropped while being routed to its final
+destination through most routing equipment and as such requires the
+attacker to be in a local position in order to be exploited.
+
+```C
+static struct ip_udp_hdr *__net_defragment(struct ip_udp_hdr *ip, int *lenp)
+{
+ static uchar pkt_buff[IP_PKTSIZE] __aligned(PKTALIGN);
+ static u16 first_hole, total_len;
+ struct hole *payload, *thisfrag, *h, *newh;
+ struct ip_udp_hdr *localip = (struct ip_udp_hdr *)pkt_buff;
+ uchar *indata = (uchar *)ip;
+ int offset8, start, len, done = 0;
+ u16 ip_off = ntohs(ip->ip_off);
+
+ /* payload starts after IP header, this fragment is in there */
+ payload = (struct hole *)(pkt_buff + IP_HDR_SIZE);
+ offset8 = (ip_off & IP_OFFS);
+ thisfrag = payload + offset8;
+ start = offset8 * 8;
+ len = ntohs(ip->ip_len) - IP_HDR_SIZE;
+```
+
+The last line of the previous excerpt from `u-boot/net/net.c` shows
+where the underflow to a negative `len` value occurs if `ip_len` is set
+to a value strictly lower than 20 (`IP_HDR_SIZE` being 20). Also note
+that in the above excerpt the `pkt_buff` buffer has a size of
+`CONFIG_NET_MAXDEFRAG` which defaults to 16 KB but can range from 1KB to
+64 KB depending on configurations.
+
+```C
+ /* finally copy this fragment and possibly return whole packet */
+ memcpy((uchar *)thisfrag, indata + IP_HDR_SIZE, len);
+```
+
+In the above excerpt the `memcpy` overflows the destination by
+attempting to make a copy of nearly 4 gigabytes in a buffer that's
+designed to hold `CONFIG_NET_MAXDEFRAG` bytes at most which leads to a DoS.
+
+ ### Recommendation
+
+Stop processing of the packet if `ip_len` is lower than 21 (as defined
+by the minimum length of a data carrying datagram in the IP
+Specification Document:
+[RFC791](https://datatracker.ietf.org/doc/html/rfc791) page 34)."
+
+Add a check for ip_len lesser than 28 and stop processing the packet
+in this case.
+
+Such a check covers the two reported bugs.
+
+Reported-by: Nicolas Bidron <nicolas.bidron@nccgroup.com>
+Signed-off-by: Fabio Estevam <festevam@denx.de>
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/b85d130ea0cac152c21ec38ac9417b31d41b5552
+Bug: https://www.nccgroup.com/us/research-blog/technical-advisory-multiple-vulnerabilities-in-u-boot-cve-2022-30790-cve-2022-30552/
+Bug-Debian: https://bugs.debian.org/1014470
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2022-30790
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2022-30552
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2022-30790
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2022-30552
+---
+ include/net.h | 2 ++
+ net/net.c | 3 +++
+ 2 files changed, 5 insertions(+)
+
+diff --git a/include/net.h b/include/net.h
+index aff6674..50a4a8b 100644
+--- a/include/net.h
++++ b/include/net.h
+@@ -395,6 +395,8 @@ struct ip_hdr {
+
+ #define IP_HDR_SIZE (sizeof(struct ip_hdr))
+
++#define IP_MIN_FRAG_DATAGRAM_SIZE (IP_HDR_SIZE + 8)
++
+ /*
+ * Internet Protocol (IP) + UDP header.
+ */
+diff --git a/net/net.c b/net/net.c
+index ad7e3b3..5e98733 100644
+--- a/net/net.c
++++ b/net/net.c
+@@ -907,6 +907,9 @@ static struct ip_udp_hdr *__net_defragment(struct ip_udp_hdr *ip, int *lenp)
+ int offset8, start, len, done = 0;
+ u16 ip_off = ntohs(ip->ip_off);
+
++ if (ip->ip_len < IP_MIN_FRAG_DATAGRAM_SIZE)
++ return NULL;
++
+ /* payload starts after IP header, this fragment is in there */
+ payload = (struct hole *)(pkt_buff + IP_HDR_SIZE);
+ offset8 = (ip_off & IP_OFFS);
--- /dev/null
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+Date: Thu, 9 Jun 2022 16:02:06 +0200
+Subject: [PATCH] fs/squashfs: sqfs_read: Prevent arbitrary code execution
+
+Following Jincheng's report, an out-of-band write leading to arbitrary
+code execution is possible because on one side the squashfs logic
+accepts directory names up to 65535 bytes (u16), while U-Boot fs logic
+accepts directory names up to 255 bytes long.
+
+Prevent such an exploit from happening by capping directory name sizes
+to 255. Use a define for this purpose so that developers can link the
+limitation to its source and eventually kill it some day by dynamically
+allocating this array (if ever desired).
+
+Link: https://lore.kernel.org/all/CALO=DHFB+yBoXxVr5KcsK0iFdg+e7ywko4-e+72kjbcS8JBfPw@mail.gmail.com
+Reported-by: Jincheng Wang <jc.w4ng@gmail.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Tested-by: Jincheng Wang <jc.w4ng@gmail.com>
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/2ac0baab4aff1a0b45067d0b62f00c15f4e86856
+Bug: https://lore.kernel.org/all/CALO=DHFB+yBoXxVr5KcsK0iFdg+e7ywko4-e+72kjbcS8JBfPw@mail.gmail.com/
+Bug-Debian: https://bugs.debian.org/1014528
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2022-33103
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2022-33103
+---
+ fs/squashfs/sqfs.c | 7 ++++---
+ include/fs.h | 4 +++-
+ 2 files changed, 7 insertions(+), 4 deletions(-)
+
+diff --git a/fs/squashfs/sqfs.c b/fs/squashfs/sqfs.c
+index e6e8b06..a2922a4 100644
+--- a/fs/squashfs/sqfs.c
++++ b/fs/squashfs/sqfs.c
+@@ -1057,9 +1057,10 @@ int sqfs_readdir(struct fs_dir_stream *fs_dirs, struct fs_dirent **dentp)
+ return -SQFS_STOP_READDIR;
+ }
+
+- /* Set entry name */
+- strncpy(dent->name, dirs->entry->name, dirs->entry->name_size + 1);
+- dent->name[dirs->entry->name_size + 1] = '\0';
++ /* Set entry name (capped at FS_DIRENT_NAME_LEN which is a U-Boot limitation) */
++ name_size = min_t(u16, dirs->entry->name_size + 1, FS_DIRENT_NAME_LEN - 1);
++ strncpy(dent->name, dirs->entry->name, name_size);
++ dent->name[name_size] = '\0';
+
+ offset = dirs->entry->name_size + 1 + SQFS_ENTRY_BASE_LENGTH;
+ dirs->entry_count--;
+diff --git a/include/fs.h b/include/fs.h
+index 0794b50..fb44d17 100644
+--- a/include/fs.h
++++ b/include/fs.h
+@@ -160,6 +160,8 @@ int fs_write(const char *filename, ulong addr, loff_t offset, loff_t len,
+ #define FS_DT_REG 8 /* regular file */
+ #define FS_DT_LNK 10 /* symbolic link */
+
++#define FS_DIRENT_NAME_LEN 256
++
+ /*
+ * A directory entry, returned by fs_readdir(). Returns information
+ * about the file/directory at the current directory entry position.
+@@ -167,7 +169,7 @@ int fs_write(const char *filename, ulong addr, loff_t offset, loff_t len,
+ struct fs_dirent {
+ unsigned type; /* one of FS_DT_x (not a mask) */
+ loff_t size; /* size in bytes */
+- char name[256];
++ char name[FS_DIRENT_NAME_LEN];
+ };
+
+ /* Note: fs_dir_stream should be treated as opaque to the user of fs layer */
--- /dev/null
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+Date: Mon, 27 Jun 2022 12:20:03 +0200
+Subject: [PATCH] fs/squashfs: Use kcalloc when relevant
+
+A crafted squashfs image could embed a huge number of empty metadata
+blocks in order to make the amount of malloc()'d memory overflow and be
+much smaller than expected. Because of this flaw, any random code
+positioned at the right location in the squashfs image could be memcpy'd
+from the squashfs structures into U-Boot code location while trying to
+access the rearmost blocks, before being executed.
+
+In order to prevent this vulnerability from being exploited in eg. a
+secure boot environment, let's add a check over the amount of data
+that is going to be allocated. Such a check could look like:
+
+if (!elem_size || n > SIZE_MAX / elem_size)
+ return NULL;
+
+The right way to do it would be to enhance the calloc() implementation
+but this is quite an impacting change for such a small fix. Another
+solution would be to add the check before the malloc call in the
+squashfs implementation, but this does not look right. So for now, let's
+use the kcalloc() compatibility function from Linux, which has this
+check.
+
+Fixes: c5100613037 ("fs/squashfs: new filesystem")
+Reported-by: Tatsuhiko Yasumatsu <Tatsuhiko.Yasumatsu@sony.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Tested-by: Tatsuhiko Yasumatsu <Tatsuhiko.Yasumatsu@sony.com>
+
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://github.com/u-boot/u-boot/commit/b6f4c757959f8850e1299a77c8e5713da78e8ec0
+Bug: https://lists.denx.de/pipermail/u-boot/2022-June/487467.html
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2022-33967
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2022-33967
+---
+ fs/squashfs/sqfs.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/fs/squashfs/sqfs.c b/fs/squashfs/sqfs.c
+index 5de69ac..e6e8b06 100644
+--- a/fs/squashfs/sqfs.c
++++ b/fs/squashfs/sqfs.c
+@@ -13,6 +13,7 @@
+ #include <linux/types.h>
+ #include <linux/byteorder/little_endian.h>
+ #include <linux/byteorder/generic.h>
++#include <linux/compat.h>
+ #include <memalign.h>
+ #include <stdlib.h>
+ #include <string.h>
+@@ -725,7 +726,8 @@ static int sqfs_read_inode_table(unsigned char **inode_table)
+ goto free_itb;
+ }
+
+- *inode_table = malloc(metablks_count * SQFS_METADATA_BLOCK_SIZE);
++ *inode_table = kcalloc(metablks_count, SQFS_METADATA_BLOCK_SIZE,
++ GFP_KERNEL);
+ if (!*inode_table) {
+ ret = -ENOMEM;
+ goto free_itb;
--- /dev/null
+From: Nicolas Iooss <nicolas.iooss+uboot@ledger.fr>
+Date: Fri, 10 Jun 2022 14:50:25 +0000
+Subject: [PATCH] i2c: fix stack buffer overflow vulnerability in i2c md
+ command
+
+When running "i2c md 0 0 80000100", the function do_i2c_md parses the
+length into an unsigned int variable named length. The value is then
+moved to a signed variable:
+
+ int nbytes = length;
+ #define DISP_LINE_LEN 16
+ int linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
+ ret = dm_i2c_read(dev, addr, linebuf, linebytes);
+
+On systems where integers are 32 bits wide, 0x80000100 is a negative
+value to "nbytes > DISP_LINE_LEN" is false and linebytes gets assigned
+0x80000100 instead of 16.
+
+The consequence is that the function which reads from the i2c device
+(dm_i2c_read or i2c_read) is called with a 16-byte stack buffer to fill
+but with a size parameter which is too large. In some cases, this could
+trigger a crash. But with some i2c drivers, such as drivers/i2c/nx_i2c.c
+(used with "nexell,s5pxx18-i2c" bus), the size is actually truncated to
+a 16-bit integer. This is because function i2c_transfer expects an
+unsigned short length. In such a case, an attacker who can control the
+response of an i2c device can overwrite the return address of a function
+and execute arbitrary code through Return-Oriented Programming.
+
+Fix this issue by using unsigned integers types in do_i2c_md. While at
+it, make also alen unsigned, as signed sizes can cause vulnerabilities
+when people forgot to check that they can be negative.
+
+Signed-off-by: Nicolas Iooss <nicolas.iooss+uboot@ledger.fr>
+Reviewed-by: Heiko Schocher <hs@denx.de>
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/8f8c04bf1ebbd2f72f1643e7ad9617dafa6e5409
+Bug: https://lists.denx.de/pipermail/u-boot/2022-June/486113.html
+Bug-Debian: https://bugs.debian.org/1014529
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2022-34835
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2022-34835
+---
+ cmd/i2c.c | 24 ++++++++++++------------
+ 1 file changed, 12 insertions(+), 12 deletions(-)
+
+diff --git a/cmd/i2c.c b/cmd/i2c.c
+index cc01119..6135fb2 100644
+--- a/cmd/i2c.c
++++ b/cmd/i2c.c
+@@ -248,10 +248,10 @@ int i2c_set_bus_speed(unsigned int speed)
+ *
+ * Returns the address length.
+ */
+-static uint get_alen(char *arg, int default_len)
++static uint get_alen(char *arg, uint default_len)
+ {
+- int j;
+- int alen;
++ uint j;
++ uint alen;
+
+ alen = default_len;
+ for (j = 0; j < 8; j++) {
+@@ -295,7 +295,7 @@ static int do_i2c_read(struct cmd_tbl *cmdtp, int flag, int argc,
+ {
+ uint chip;
+ uint devaddr, length;
+- int alen;
++ uint alen;
+ u_char *memaddr;
+ int ret;
+ #ifdef CONFIG_DM_I2C
+@@ -349,7 +349,7 @@ static int do_i2c_write(struct cmd_tbl *cmdtp, int flag, int argc,
+ {
+ uint chip;
+ uint devaddr, length;
+- int alen;
++ uint alen;
+ u_char *memaddr;
+ int ret;
+ #ifdef CONFIG_DM_I2C
+@@ -517,8 +517,8 @@ static int do_i2c_md(struct cmd_tbl *cmdtp, int flag, int argc,
+ {
+ uint chip;
+ uint addr, length;
+- int alen;
+- int j, nbytes, linebytes;
++ uint alen;
++ uint j, nbytes, linebytes;
+ int ret;
+ #ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+@@ -637,9 +637,9 @@ static int do_i2c_mw(struct cmd_tbl *cmdtp, int flag, int argc,
+ {
+ uint chip;
+ ulong addr;
+- int alen;
++ uint alen;
+ uchar byte;
+- int count;
++ uint count;
+ int ret;
+ #ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+@@ -724,8 +724,8 @@ static int do_i2c_crc(struct cmd_tbl *cmdtp, int flag, int argc,
+ {
+ uint chip;
+ ulong addr;
+- int alen;
+- int count;
++ uint alen;
++ uint count;
+ uchar byte;
+ ulong crc;
+ ulong err;
+@@ -1033,7 +1033,7 @@ static int do_i2c_loop(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+ {
+ uint chip;
+- int alen;
++ uint alen;
+ uint addr;
+ uint length;
+ u_char bytes[16];
--- /dev/null
+From: Richard Weinberger <richard@nod.at>
+Date: Fri, 2 Aug 2024 18:36:45 +0200
+Subject: squashfs: Fix integer overflow in sqfs_inode_size()
+
+A carefully crafted squashfs filesystem can exhibit an extremly large
+inode size and overflow the calculation in sqfs_inode_size().
+As a consequence, the squashfs driver will read from wrong locations.
+
+Fix by using __builtin_add_overflow() to detect the overflow.
+
+Signed-off-by: Richard Weinberger <richard@nod.at>
+Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/c8e929e5758999933f9e905049ef2bf3fe6b140d
+Bug: https://www.openwall.com/lists/oss-security/2025/02/17/2
+Bug-Debian: https://bugs.debian.org/1098254
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2024-57254
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2024-57254
+---
+ fs/squashfs/sqfs_inode.c | 9 +++++++--
+ 1 file changed, 7 insertions(+), 2 deletions(-)
+
+diff --git a/fs/squashfs/sqfs_inode.c b/fs/squashfs/sqfs_inode.c
+index e76ec7c..540f7d0 100644
+--- a/fs/squashfs/sqfs_inode.c
++++ b/fs/squashfs/sqfs_inode.c
+@@ -77,11 +77,16 @@ int sqfs_inode_size(struct squashfs_base_inode *inode, u32 blk_size)
+
+ case SQFS_SYMLINK_TYPE:
+ case SQFS_LSYMLINK_TYPE: {
++ int size;
++
+ struct squashfs_symlink_inode *symlink =
+ (struct squashfs_symlink_inode *)inode;
+
+- return sizeof(*symlink) +
+- get_unaligned_le32(&symlink->symlink_size);
++ if (__builtin_add_overflow(sizeof(*symlink),
++ get_unaligned_le32(&symlink->symlink_size), &size))
++ return -EINVAL;
++
++ return size;
+ }
+
+ case SQFS_BLKDEV_TYPE:
--- /dev/null
+From: Richard Weinberger <richard@nod.at>
+Date: Fri, 2 Aug 2024 18:36:44 +0200
+Subject: squashfs: Fix integer overflow in sqfs_resolve_symlink()
+
+A carefully crafted squashfs filesystem can exhibit an inode size of 0xffffffff,
+as a consequence malloc() will do a zero allocation.
+Later in the function the inode size is again used for copying data.
+So an attacker can overwrite memory.
+Avoid the overflow by using the __builtin_add_overflow() helper.
+
+Signed-off-by: Richard Weinberger <richard@nod.at>
+Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/233945eba63e24061dffeeaeb7cd6fe985278356
+Bug: https://www.openwall.com/lists/oss-security/2025/02/17/2
+Bug-Debian: https://bugs.debian.org/1098254
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2024-57255
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2024-57255
+---
+ fs/squashfs/sqfs.c | 10 ++++++----
+ 1 file changed, 6 insertions(+), 4 deletions(-)
+
+diff --git a/fs/squashfs/sqfs.c b/fs/squashfs/sqfs.c
+index a2922a4..3cd4724 100644
+--- a/fs/squashfs/sqfs.c
++++ b/fs/squashfs/sqfs.c
+@@ -416,8 +416,10 @@ static char *sqfs_resolve_symlink(struct squashfs_symlink_inode *sym,
+ char *resolved, *target;
+ u32 sz;
+
+- sz = get_unaligned_le32(&sym->symlink_size);
+- target = malloc(sz + 1);
++ if (__builtin_add_overflow(get_unaligned_le32(&sym->symlink_size), 1, &sz))
++ return NULL;
++
++ target = malloc(sz);
+ if (!target)
+ return NULL;
+
+@@ -425,9 +427,9 @@ static char *sqfs_resolve_symlink(struct squashfs_symlink_inode *sym,
+ * There is no trailling null byte in the symlink's target path, so a
+ * copy is made and a '\0' is added at its end.
+ */
+- target[sz] = '\0';
++ target[sz - 1] = '\0';
+ /* Get target name (relative path) */
+- strncpy(target, sym->symlink, sz);
++ strncpy(target, sym->symlink, sz - 1);
+
+ /* Relative -> absolute path conversion */
+ resolved = sqfs_get_abs_path(base_path, target);
--- /dev/null
+From: Richard Weinberger <richard@nod.at>
+Date: Fri, 9 Aug 2024 11:54:28 +0200
+Subject: [PATCH] ext4: Fix integer overflow in ext4fs_read_symlink()
+
+While zalloc() takes a size_t type, adding 1 to the le32 variable
+will overflow.
+A carefully crafted ext4 filesystem can exhibit an inode size of 0xffffffff
+and as consequence zalloc() will do a zero allocation.
+
+Later in the function the inode size is again used for copying data.
+So an attacker can overwrite memory.
+
+Avoid the overflow by using the __builtin_add_overflow() helper.
+
+Signed-off-by: Richard Weinberger <richard@nod.at>
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/35f75d2a46e5859138c83a75cd2f4141c5479ab9
+Bug: https://www.openwall.com/lists/oss-security/2025/02/17/2
+Bug-Debian: https://bugs.debian.org/1098254
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2024-57256
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2024-57256
+---
+ fs/ext4/ext4_common.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c
+index c52cc40..6c4f8dc 100644
+--- a/fs/ext4/ext4_common.c
++++ b/fs/ext4/ext4_common.c
+@@ -2183,13 +2183,17 @@ static char *ext4fs_read_symlink(struct ext2fs_node *node)
+ struct ext2fs_node *diro = node;
+ int status;
+ loff_t actread;
++ size_t alloc_size;
+
+ if (!diro->inode_read) {
+ status = ext4fs_read_inode(diro->data, diro->ino, &diro->inode);
+ if (status == 0)
+ return NULL;
+ }
+- symlink = zalloc(le32_to_cpu(diro->inode.size) + 1);
++ if (__builtin_add_overflow(le32_to_cpu(diro->inode.size), 1, &alloc_size))
++ return NULL;
++
++ symlink = zalloc(alloc_size);
+ if (!symlink)
+ return NULL;
+
--- /dev/null
+From: Richard Weinberger <richard@nod.at>
+Date: Fri, 2 Aug 2024 18:36:47 +0200
+Subject: [PATCH] squashfs: Fix stack overflow while symlink resolving
+
+The squashfs driver blindly follows symlinks, and calls sqfs_size()
+recursively. So an attacker can create a crafted filesystem and with
+a deep enough nesting level a stack overflow can be achieved.
+
+Fix by limiting the nesting level to 8.
+
+Signed-off-by: Richard Weinberger <richard@nod.at>
+Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/4f5cc096bfd0a591f8a11e86999e3d90a9484c34
+Bug: https://www.openwall.com/lists/oss-security/2025/02/17/2
+Bug-Debian: https://bugs.debian.org/1098254
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2024-57257
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2024-57257
+---
+ fs/squashfs/sqfs.c | 76 +++++++++++++++++++++++++++++++++++++++++++-----------
+ 1 file changed, 61 insertions(+), 15 deletions(-)
+
+diff --git a/fs/squashfs/sqfs.c b/fs/squashfs/sqfs.c
+index 3cd4724..239afec 100644
+--- a/fs/squashfs/sqfs.c
++++ b/fs/squashfs/sqfs.c
+@@ -24,7 +24,12 @@
+ #include "sqfs_filesystem.h"
+ #include "sqfs_utils.h"
+
++#define MAX_SYMLINK_NEST 8
++
+ static struct squashfs_ctxt ctxt;
++static int symlinknest;
++
++static int sqfs_readdir_nest(struct fs_dir_stream *fs_dirs, struct fs_dirent **dentp);
+
+ static int sqfs_disk_read(__u32 block, __u32 nr_blocks, void *buf)
+ {
+@@ -502,7 +507,7 @@ static int sqfs_search_dir(struct squashfs_dir_stream *dirs, char **token_list,
+ goto out;
+ }
+
+- while (!sqfs_readdir(dirsp, &dent)) {
++ while (!sqfs_readdir_nest(dirsp, &dent)) {
+ ret = strcmp(dent->name, token_list[j]);
+ if (!ret)
+ break;
+@@ -527,6 +532,11 @@ static int sqfs_search_dir(struct squashfs_dir_stream *dirs, char **token_list,
+
+ /* Check for symbolic link and inode type sanity */
+ if (get_unaligned_le16(&dir->inode_type) == SQFS_SYMLINK_TYPE) {
++ if (++symlinknest == MAX_SYMLINK_NEST) {
++ ret = -ELOOP;
++ goto out;
++ }
++
+ sym = (struct squashfs_symlink_inode *)table;
+ /* Get first j + 1 tokens */
+ path = sqfs_concat_tokens(token_list, j + 1);
+@@ -872,7 +882,7 @@ out:
+ return metablks_count;
+ }
+
+-int sqfs_opendir(const char *filename, struct fs_dir_stream **dirsp)
++static int sqfs_opendir_nest(const char *filename, struct fs_dir_stream **dirsp)
+ {
+ unsigned char *inode_table = NULL, *dir_table = NULL;
+ int j, token_count = 0, ret = 0, metablks_count;
+@@ -967,7 +977,19 @@ out:
+ return ret;
+ }
+
++int sqfs_opendir(const char *filename, struct fs_dir_stream **dirsp)
++{
++ symlinknest = 0;
++ return sqfs_opendir_nest(filename, dirsp);
++}
++
+ int sqfs_readdir(struct fs_dir_stream *fs_dirs, struct fs_dirent **dentp)
++{
++ symlinknest = 0;
++ return sqfs_readdir_nest(fs_dirs, dentp);
++}
++
++static int sqfs_readdir_nest(struct fs_dir_stream *fs_dirs, struct fs_dirent **dentp)
+ {
+ struct squashfs_super_block *sblk = ctxt.sblk;
+ struct squashfs_dir_stream *dirs;
+@@ -1310,8 +1332,8 @@ static int sqfs_get_lregfile_info(struct squashfs_lreg_inode *lreg,
+ return datablk_count;
+ }
+
+-int sqfs_read(const char *filename, void *buf, loff_t offset, loff_t len,
+- loff_t *actread)
++static int sqfs_read_nest(const char *filename, void *buf, loff_t offset,
++ loff_t len, loff_t *actread)
+ {
+ char *dir = NULL, *fragment_block, *datablock = NULL, *data_buffer = NULL;
+ char *fragment = NULL, *file = NULL, *resolved, *data;
+@@ -1341,11 +1363,11 @@ int sqfs_read(const char *filename, void *buf, loff_t offset, loff_t len,
+ }
+
+ /*
+- * sqfs_opendir will uncompress inode and directory tables, and will
++ * sqfs_opendir_nest will uncompress inode and directory tables, and will
+ * return a pointer to the directory that contains the requested file.
+ */
+ sqfs_split_path(&file, &dir, filename);
+- ret = sqfs_opendir(dir, &dirsp);
++ ret = sqfs_opendir_nest(dir, &dirsp);
+ if (ret) {
+ goto out;
+ }
+@@ -1353,7 +1375,7 @@ int sqfs_read(const char *filename, void *buf, loff_t offset, loff_t len,
+ dirs = (struct squashfs_dir_stream *)dirsp;
+
+ /* For now, only regular files are able to be loaded */
+- while (!sqfs_readdir(dirsp, &dent)) {
++ while (!sqfs_readdir_nest(dirsp, &dent)) {
+ ret = strcmp(dent->name, file);
+ if (!ret)
+ break;
+@@ -1402,9 +1424,14 @@ int sqfs_read(const char *filename, void *buf, loff_t offset, loff_t len,
+ break;
+ case SQFS_SYMLINK_TYPE:
+ case SQFS_LSYMLINK_TYPE:
++ if (++symlinknest == MAX_SYMLINK_NEST) {
++ ret = -ELOOP;
++ goto out;
++ }
++
+ symlink = (struct squashfs_symlink_inode *)ipos;
+ resolved = sqfs_resolve_symlink(symlink, filename);
+- ret = sqfs_read(resolved, buf, offset, len, actread);
++ ret = sqfs_read_nest(resolved, buf, offset, len, actread);
+ free(resolved);
+ goto out;
+ case SQFS_BLKDEV_TYPE:
+@@ -1566,7 +1593,14 @@ out:
+ return ret;
+ }
+
+-int sqfs_size(const char *filename, loff_t *size)
++int sqfs_read(const char *filename, void *buf, loff_t offset, loff_t len,
++ loff_t *actread)
++{
++ symlinknest = 0;
++ return sqfs_read_nest(filename, buf, offset, len, actread);
++}
++
++static int sqfs_size_nest(const char *filename, loff_t *size)
+ {
+ struct squashfs_super_block *sblk = ctxt.sblk;
+ struct squashfs_symlink_inode *symlink;
+@@ -1582,10 +1616,10 @@ int sqfs_size(const char *filename, loff_t *size)
+
+ sqfs_split_path(&file, &dir, filename);
+ /*
+- * sqfs_opendir will uncompress inode and directory tables, and will
++ * sqfs_opendir_nest will uncompress inode and directory tables, and will
+ * return a pointer to the directory that contains the requested file.
+ */
+- ret = sqfs_opendir(dir, &dirsp);
++ ret = sqfs_opendir_nest(dir, &dirsp);
+ if (ret) {
+ ret = -EINVAL;
+ goto free_strings;
+@@ -1593,7 +1627,7 @@ int sqfs_size(const char *filename, loff_t *size)
+
+ dirs = (struct squashfs_dir_stream *)dirsp;
+
+- while (!sqfs_readdir(dirsp, &dent)) {
++ while (!sqfs_readdir_nest(dirsp, &dent)) {
+ ret = strcmp(dent->name, file);
+ if (!ret)
+ break;
+@@ -1626,6 +1660,11 @@ int sqfs_size(const char *filename, loff_t *size)
+ break;
+ case SQFS_SYMLINK_TYPE:
+ case SQFS_LSYMLINK_TYPE:
++ if (++symlinknest == MAX_SYMLINK_NEST) {
++ *size = 0;
++ return -ELOOP;
++ }
++
+ symlink = (struct squashfs_symlink_inode *)ipos;
+ resolved = sqfs_resolve_symlink(symlink, filename);
+ ret = sqfs_size(resolved, size);
+@@ -1665,10 +1704,11 @@ int sqfs_exists(const char *filename)
+
+ sqfs_split_path(&file, &dir, filename);
+ /*
+- * sqfs_opendir will uncompress inode and directory tables, and will
++ * sqfs_opendir_nest will uncompress inode and directory tables, and will
+ * return a pointer to the directory that contains the requested file.
+ */
+- ret = sqfs_opendir(dir, &dirsp);
++ symlinknest = 0;
++ ret = sqfs_opendir_nest(dir, &dirsp);
+ if (ret) {
+ ret = -EINVAL;
+ goto free_strings;
+@@ -1676,7 +1716,7 @@ int sqfs_exists(const char *filename)
+
+ dirs = (struct squashfs_dir_stream *)dirsp;
+
+- while (!sqfs_readdir(dirsp, &dent)) {
++ while (!sqfs_readdir_nest(dirsp, &dent)) {
+ ret = strcmp(dent->name, file);
+ if (!ret)
+ break;
+@@ -1693,6 +1733,12 @@ free_strings:
+ return ret == 0;
+ }
+
++int sqfs_size(const char *filename, loff_t *size)
++{
++ symlinknest = 0;
++ return sqfs_size_nest(filename, size);
++}
++
+ void sqfs_close(void)
+ {
+ sqfs_decompressor_cleanup(&ctxt);
--- /dev/null
+From: Richard Weinberger <richard@nod.at>
+Date: Fri, 2 Aug 2024 12:08:45 +0200
+Subject: dlmalloc: Fix integer overflow in sbrk()
+
+Make sure that the new break is within mem_malloc_start
+and mem_malloc_end before making progress.
+ulong new = old + increment; can overflow for extremely large
+increment values and memset() can get wrongly called.
+
+Signed-off-by: Richard Weinberger <richard@nod.at>
+Reviewed-by: Simon Glass <sjg@chromium.org>
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/0a10b49206a29b4aa2f80233a3e53ca0466bb0b3
+Bug: https://www.openwall.com/lists/oss-security/2025/02/17/2
+Bug-Debian: https://bugs.debian.org/1098254
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2024-57258
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2024-57258
+---
+ common/dlmalloc.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/common/dlmalloc.c b/common/dlmalloc.c
+index b29a7cf..16fe49d 100644
+--- a/common/dlmalloc.c
++++ b/common/dlmalloc.c
+@@ -589,6 +589,9 @@ void *sbrk(ptrdiff_t increment)
+ ulong old = mem_malloc_brk;
+ ulong new = old + increment;
+
++ if ((new < mem_malloc_start) || (new > mem_malloc_end))
++ return (void *)MORECORE_FAILURE;
++
+ /*
+ * if we are giving memory back make sure we clear it out since
+ * we set MORECORE_CLEARS to 1
+@@ -596,9 +599,6 @@ void *sbrk(ptrdiff_t increment)
+ if (increment < 0)
+ memset((void *)new, 0, -increment);
+
+- if ((new < mem_malloc_start) || (new > mem_malloc_end))
+- return (void *)MORECORE_FAILURE;
+-
+ mem_malloc_brk = new;
+
+ return (void *)old;
--- /dev/null
+From: Richard Weinberger <richard@nod.at>
+Date: Fri, 2 Aug 2024 12:08:44 +0200
+Subject: dlmalloc: Fix integer overflow in request2size()
+
+req is of type size_t, casting it to long opens the door
+for an integer overflow.
+Values between LONG_MAX - (SIZE_SZ + MALLOC_ALIGN_MASK) - 1 and LONG_MAX
+cause and overflow such that request2size() returns MINSIZE.
+
+Fix by removing the cast.
+The origin of the cast is unclear, it's in u-boot and ppcboot since ever
+and predates the CVS history.
+Doug Lea's original dlmalloc implementation also doesn't have it.
+
+Signed-off-by: Richard Weinberger <richard@nod.at>
+Reviewed-by: Simon Glass <sjg@chromium.org>
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/8642b2178d2c4002c99a0b69a845a48f2ae2706f
+Bug: https://www.openwall.com/lists/oss-security/2025/02/17/2
+Bug-Debian: https://bugs.debian.org/1098254
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2024-57258
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2024-57258
+---
+ common/dlmalloc.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/common/dlmalloc.c b/common/dlmalloc.c
+index 16fe49d..156481c 100644
+--- a/common/dlmalloc.c
++++ b/common/dlmalloc.c
+@@ -367,8 +367,8 @@ nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ /* pad request bytes into a usable size */
+
+ #define request2size(req) \
+- (((long)((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) < \
+- (long)(MINSIZE + MALLOC_ALIGN_MASK)) ? MINSIZE : \
++ ((((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) < \
++ (MINSIZE + MALLOC_ALIGN_MASK)) ? MINSIZE : \
+ (((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) & ~(MALLOC_ALIGN_MASK)))
+
+ /* Check if m has acceptable alignment */
--- /dev/null
+From: Richard Weinberger <richard@nod.at>
+Date: Fri, 2 Aug 2024 12:08:43 +0200
+Subject: x86: Fix ptrdiff_t for x86_64
+
+sbrk() assumes ptrdiff_t is large enough to enlarge/shrink the heap
+by LONG_MIN/LONG_MAX.
+So, use the long type, also to match the rest of the Linux ecosystem.
+
+Signed-off-by: Richard Weinberger <richard@nod.at>
+Reviewed-by: Simon Glass <sjg@chromium.org>
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/c17b2a05dd50a3ba437e6373093a0d6a359cdee0
+Bug: https://www.openwall.com/lists/oss-security/2025/02/17/2
+Bug-Debian: https://bugs.debian.org/1098254
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2024-57258
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2024-57258
+---
+ arch/x86/include/asm/posix_types.h | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/arch/x86/include/asm/posix_types.h b/arch/x86/include/asm/posix_types.h
+index dbcea7f..e1ed9bc 100644
+--- a/arch/x86/include/asm/posix_types.h
++++ b/arch/x86/include/asm/posix_types.h
+@@ -20,11 +20,12 @@ typedef unsigned short __kernel_gid_t;
+ #if defined(__x86_64__)
+ typedef unsigned long __kernel_size_t;
+ typedef long __kernel_ssize_t;
++typedef long __kernel_ptrdiff_t;
+ #else
+ typedef unsigned int __kernel_size_t;
+ typedef int __kernel_ssize_t;
+-#endif
+ typedef int __kernel_ptrdiff_t;
++#endif
+ typedef long __kernel_time_t;
+ typedef long __kernel_suseconds_t;
+ typedef long __kernel_clock_t;
--- /dev/null
+From: Richard Weinberger <richard@nod.at>
+Date: Fri, 2 Aug 2024 22:05:09 +0200
+Subject: squashfs: Fix heap corruption in sqfs_search_dir()
+
+res needs to be large enough to store both strings rem and target,
+plus the path separator and the terminator.
+Currently the space for the path separator is not accounted, so
+the heap is corrupted by one byte.
+
+Signed-off-by: Richard Weinberger <richard@nod.at>
+Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
+
+Reviewed-By: Daniel Leidert <dleidert@debian.org>
+Origin: https://source.denx.de/u-boot/u-boot/-/commit/048d795bb5b3d9c5701b4855f5e74bcf6849bf5e
+Bug: https://www.openwall.com/lists/oss-security/2025/02/17/2
+Bug-Debian: https://bugs.debian.org/1098254
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2024-57259
+Bug-Freexian-Security: https://deb.freexian.com/extended-lts/tracker/CVE-2024-57259
+---
+ fs/squashfs/sqfs.c | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/fs/squashfs/sqfs.c b/fs/squashfs/sqfs.c
+index 239afec..c4b3fb8 100644
+--- a/fs/squashfs/sqfs.c
++++ b/fs/squashfs/sqfs.c
+@@ -557,8 +557,11 @@ static int sqfs_search_dir(struct squashfs_dir_stream *dirs, char **token_list,
+ ret = -ENOMEM;
+ goto out;
+ }
+- /* Concatenate remaining tokens and symlink's target */
+- res = malloc(strlen(rem) + strlen(target) + 1);
++ /*
++ * Concatenate remaining tokens and symlink's target.
++ * Allocate enough space for rem, target, '/' and '\0'.
++ */
++ res = malloc(strlen(rem) + strlen(target) + 2);
+ if (!res) {
+ ret = -ENOMEM;
+ goto out;
--- /dev/null
+Add the debian revision to the U-boot version, which is displayed at
+boot and can be helpful to determine which specific version is used.
+
+--- a/Makefile
++++ b/Makefile
+@@ -447,7 +447,7 @@
+
+ # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
+ UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
+-UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
++UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)$(DEBIAN_REVISION)
+
+ export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
+ export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
--- /dev/null
+Enable distro_bootcmd support (doc/README.distro) for omap5 targets.
+
+--- a/include/configs/ti_omap5_common.h
++++ b/include/configs/ti_omap5_common.h
+@@ -58,6 +58,21 @@
+ #include <environment/ti/mmc.h>
+ #include <environment/ti/nand.h>
+
++#define BOOT_TARGET_DEVICES(func) \
++ func(MMC, mmc, 0) \
++ func(MMC, mmc, 1) \
++ func(PXE, pxe, na) \
++ func(DHCP, dhcp, na)
++
++#ifdef CONFIG_BOOTCOMMAND
++#undef CONFIG_BOOTCOMMAND
++#endif
++#define CONFIG_BOOTCOMMAND \
++ "run findfdt; " \
++ "run distro_bootcmd"
++
++#include <config_distro_bootcmd.h>
++
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ DEFAULT_LINUX_BOOT_ENV \
+ DEFAULT_MMC_TI_ARGS \
+@@ -67,6 +82,7 @@
+ DFUARGS \
+ NETARGS \
+ NANDARGS \
++ BOOTENV \
+
+ /*
+ * SPL related defines. The Public RAM memory map the ROM defines the
--- /dev/null
+Description: Add spl/arndale-spl.bin rule
+Author: Ian Campbell <ijc@debian.org>
+
+--- a/Makefile
++++ b/Makefile
+@@ -1941,6 +1941,9 @@
+ spl/boot.bin: spl/u-boot-spl
+ @:
+
++spl/arndale-spl.bin: spl/u-boot-spl
++ @:
++
+ tpl/u-boot-tpl.bin: tools prepare \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
+ $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
--- /dev/null
+Ensure that CONFIG_SANDBOX is set when running "make env", avoiding a
+failure to build caused by config_distro_bootcmd.h following the wrong
+codepath...
+
+--- a/include/configs/sandbox.h
++++ b/include/configs/sandbox.h
+@@ -64,6 +64,9 @@
+ #ifdef __ASSEMBLY__
+ #define BOOTENV
+ #else
++#ifndef CONFIG_SANDBOX
++#define CONFIG_SANDBOX 1
++#endif
+ #include <config_distro_bootcmd.h>
+ #endif
+
--- /dev/null
+From 82987dbf64ab031482eee52267e2fb1edce52531 Mon Sep 17 00:00:00 2001
+From: Dongjin Kim <tobetter@gmail.com>
+Date: Sat, 28 Oct 2017 00:22:27 -0400
+Subject: [PATCH] arm: config: fix default console only to specify the device
+
+This reverts commit 767edf0f6b3eaa0303f3fd6afdc14ddce0aca70c and restores
+commit 232ed3ca534708527a9515c7c41bc3542949525c.
+
+Debian's flash-kernel expect the console variable to just contain the device,
+because it will set the bootargs to "console=${console}". So revert adding
+"console=" to the console parameter, but also adjust the shipped bootscripts
+for exynos boards to cope with it.
+
+Bug-Debian: https://bugs.debian.org/920116
+Signed-off-by: Benjamin Drung <bdrung@debian.org>
+---
+ board/samsung/common/bootscripts/autoboot.cmd | 2 +-
+ board/samsung/common/bootscripts/bootzimg.cmd | 4 ++--
+ board/samsung/common/dfu_sample_env.txt | 4 ++--
+ include/configs/odroid.h | 4 ++--
+ include/configs/odroid_xu3.h | 4 ++--
+ include/configs/s5p_goni.h | 4 ++--
+ include/configs/s5pc210_universal.h | 4 ++--
+ include/configs/trats.h | 4 ++--
+ include/configs/trats2.h | 4 ++--
+ 9 files changed, 17 insertions(+), 17 deletions(-)
+
+Index: u-boot/board/samsung/common/bootscripts/autoboot.cmd
+===================================================================
+--- u-boot.orig/board/samsung/common/bootscripts/autoboot.cmd
++++ u-boot/board/samsung/common/bootscripts/autoboot.cmd
+@@ -12,7 +12,7 @@ setenv initrdaddr "42000000"
+ setenv loaddtb "load mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} ${fdtfile}"
+ setenv loadinitrd "load mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} ${initrdname}"
+ setenv loadkernel "load mmc ${mmcbootdev}:${mmcbootpart} '${kerneladdr}' '${kernelname}'"
+-setenv kernel_args "setenv bootargs ${console} root=/dev/mmcblk${mmcrootdev}p${mmcrootpart} rootfstype=${rootfstype} rootwait ${opts}"
++setenv kernel_args "setenv bootargs console=${console} root=/dev/mmcblk${mmcrootdev}p${mmcrootpart} rootfstype=${rootfstype} rootwait ${opts}"
+
+ #### Routine: check_dtb - check that target.dtb exists on boot partition
+ setenv check_dtb "
+Index: u-boot/board/samsung/common/bootscripts/bootzimg.cmd
+===================================================================
+--- u-boot.orig/board/samsung/common/bootscripts/bootzimg.cmd
++++ u-boot/board/samsung/common/bootscripts/bootzimg.cmd
+@@ -1,5 +1,5 @@
+ setenv kernelname zImage;
+-setenv boot_kernel "setenv bootargs \"${console} root=/dev/mmcblk${mmcrootdev}p${mmcrootpart} rootfstype=${rootfstype} rootwait ${opts}\";
++setenv boot_kernel "setenv bootargs \"console=${console} root=/dev/mmcblk${mmcrootdev}p${mmcrootpart} rootfstype=${rootfstype} rootwait ${opts}\";
+ load mmc ${mmcbootdev}:${mmcbootpart} 0x40007FC0 '${kernelname}';
+ if load mmc ${mmcbootdev}:${mmcbootpart} 40800000 ${fdtfile}; then
+ bootz 0x40007FC0 - 40800000;
+@@ -7,4 +7,4 @@ else
+ echo Warning! Booting without DTB: '${fdtfile}'!;
+ bootz 0x40007FC0 -;
+ fi;"
+-run boot_kernel;
+\ No newline at end of file
++run boot_kernel;
+Index: u-boot/board/samsung/common/dfu_sample_env.txt
+===================================================================
+--- u-boot.orig/board/samsung/common/dfu_sample_env.txt
++++ u-boot/board/samsung/common/dfu_sample_env.txt
+@@ -1,9 +1,9 @@
+-mmcboot=setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} ${rootfstype} rootwait ${console}; run loaduimage; bootm 0x40007FC0
++mmcboot=setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} ${rootfstype} rootwait console=${console}; run loaduimage; bootm 0x40007FC0
+ rootfstype=ext4
+ loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage
+ mmcdev=0
+ mmcbootpart=2
+ mmcrootpart=5
+-console=console=ttySAC2,115200n8
++console=ttySAC2,115200n8
+ bootcmd=run mmcboot
+ dfu_alt_info=u-boot mmc 80 800;params.bin mmc 0x38 0x8;uImage ext4 0 2
+Index: u-boot/include/configs/odroid.h
+===================================================================
+--- u-boot.orig/include/configs/odroid.h
++++ u-boot/include/configs/odroid.h
+@@ -155,7 +155,7 @@
+ "elif test -e mmc ${mmcbootdev} uImage; then; " \
+ "run boot_uimg;" \
+ "fi;\0" \
+- "console=console=ttySAC1,115200n8\0" \
++ "console=ttySAC1,115200n8\0" \
+ "mmcbootdev=0\0" \
+ "mmcbootpart=1\0" \
+ "mmcrootdev=0\0" \
+Index: u-boot/include/configs/odroid_xu3.h
+===================================================================
+--- u-boot.orig/include/configs/odroid_xu3.h
++++ u-boot/include/configs/odroid_xu3.h
+@@ -98,7 +98,7 @@
+ MEM_LAYOUT_ENV_SETTINGS \
+ BOOTENV \
+ "rootfstype=ext4\0" \
+- "console=console=ttySAC2,115200n8\0" \
++ "console=ttySAC2,115200n8\0" \
+ "fdtfile=exynos5422-odroidxu3.dtb\0" \
+ "board_name=odroidxu3\0" \
+ "mmcbootdev=0\0" \
+Index: u-boot/include/configs/s5p_goni.h
+===================================================================
+--- u-boot.orig/include/configs/s5p_goni.h
++++ u-boot/include/configs/s5p_goni.h
+@@ -132,7 +132,7 @@
+ "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+ "verify=n\0" \
+ "rootfstype=ext4\0" \
+- "console=console=ttySAC2,115200n8\0" \
++ "console=ttySAC2,115200n8\0" \
+ "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
+ "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
+ "mmcdev=0\0" \
+Index: u-boot/include/configs/s5pc210_universal.h
+===================================================================
+--- u-boot.orig/include/configs/s5pc210_universal.h
++++ u-boot/include/configs/s5pc210_universal.h
+@@ -106,7 +106,7 @@
+ "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
+ "verify=n\0" \
+ "rootfstype=ext4\0" \
+- "console=console=ttySAC1,115200n8\0" \
++ "console=ttySAC1,115200n8\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT \
+ "mbrparts=" MBRPARTS_DEFAULT \
+ "meminfo=crashkernel=32M@0x50000000\0" \
+Index: u-boot/include/configs/trats.h
+===================================================================
+--- u-boot.orig/include/configs/trats.h
++++ u-boot/include/configs/trats.h
+@@ -118,7 +118,7 @@
+ "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
+ "verify=n\0" \
+ "rootfstype=ext4\0" \
+- "console=console=ttySAC2,115200n8\0" \
++ "console=ttySAC2,115200n8\0" \
+ "meminfo=crashkernel=32M@0x50000000\0" \
+ "nfsroot=/nfsroot/arm\0" \
+ "bootblock=" CONFIG_BOOTBLOCK "\0" \
+Index: u-boot/include/configs/trats2.h
+===================================================================
+--- u-boot.orig/include/configs/trats2.h
++++ u-boot/include/configs/trats2.h
+@@ -101,7 +101,7 @@
+ "boottrace=setenv opts initcall_debug; run bootcmd\0" \
+ "verify=n\0" \
+ "rootfstype=ext4\0" \
+- "console=console=ttySAC2,115200n8\0" \
++ "console=ttySAC2,115200n8\0" \
+ "kernelname=uImage\0" \
+ "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
+ "${kernelname}\0" \
--- /dev/null
+Enables support for ext4, the "load" command, and using bootz with raw initrds.
+
+--- a/configs/mx53loco_defconfig
++++ b/configs/mx53loco_defconfig
+@@ -21,6 +21,7 @@
+ CONFIG_CMD_MII=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_EXT2=y
++CONFIG_CMD_EXT4=y
+ CONFIG_CMD_FAT=y
+ CONFIG_CMD_FS_GENERIC=y
+ CONFIG_ENV_OVERWRITE=y
--- /dev/null
+Enable booting of zImage/vmlinuz and initrd without requiring the use
+of mkimage to create uImage/uInitrd.
+
+--- a/configs/nokia_rx51_defconfig
++++ b/configs/nokia_rx51_defconfig
+@@ -62,3 +62,5 @@
+ # CONFIG_VGA_AS_SINGLE_DEVICE is not set
+ CONFIG_SPLASH_SCREEN=y
+ # CONFIG_GZIP is not set
++CONFIG_CMD_BOOTZ=y
++CONFIG_SUPPORT_RAW_INITRD=y
--- /dev/null
+From 2c346cacb4b0841051bceb27a57058020860ab8b Mon Sep 17 00:00:00 2001
+From: Arnaud Ferraris <arnaud.ferraris@collabora.com>
+Date: Wed, 2 Sep 2020 09:53:50 +0200
+Subject: [PATCH] configs: add PineTab defconfig
+Forwarded: https://patchwork.ozlabs.org/project/uboot/list/?series=232582
+
+The PineTab device-tree is already in u-boot, this commit adds the corresponding
+defconfig, based on pinephone_defconfig.
+
+Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
+
+---
+ configs/pinetab_defconfig | 22 ++++++++++++++++++++++
+ 1 file changed, 22 insertions(+)
+ create mode 100644 configs/pinetab_defconfig
+
+diff --git a/configs/pinetab_defconfig b/configs/pinetab_defconfig
+new file mode 100644
+index 0000000000..71dda9f5d9
+--- /dev/null
++++ b/configs/pinetab_defconfig
+@@ -0,0 +1,20 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL=y
++CONFIG_IDENT_STRING=""
++CONFIG_MACH_SUN50I=y
++CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
++CONFIG_DRAM_CLK=552
++CONFIG_DRAM_ZQ=3881949
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2
++# CONFIG_VIDEO_DE2 is not set
++CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinetab"
++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
++CONFIG_SYS_CONSOLE_INFO_QUIET=y
++# CONFIG_DISPLAY_CPUINFO is not set
++# CONFIG_DISPLAY_BOARDINFO is not set
++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
++# CONFIG_SPL_BANNER_PRINT is not set
++# CONFIG_SPL_POWER_SUPPORT is not set
++# CONFIG_NET is not set
++# CONFIG_EFI_LOADER is not set
+--
+2.28.0
+
--- /dev/null
+From 3fc056f0b9f7c26e58a1e947c8c0184e55919614 Mon Sep 17 00:00:00 2001
+From: David Abdurachmanov <david.abdurachmanov@gmail.com>
+Date: Wed, 21 Aug 2019 12:07:20 -0700
+Subject: [PATCH] qemu-riscv64_smode, sifive-fu540: fix extlinux (define
+ preboot)
+Forwarded: https://patchwork.ozlabs.org/patch/1151125/
+
+Commit 37304aaf60bf92a5dc3ef222ba520698bd862a44 removed preboot
+commands in RISC-V targets and broke extlinux support as reported
+by Fu Wei <wefu@redhat.com>.
+
+The patch finishes migration of CONFIG_USE_PREBOOT and CONFIG_REBOOT
+to Kconfig.
+
+Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
+---
+ configs/qemu-riscv64_smode_defconfig | 2 ++
+ configs/sifive_fu540_defconfig | 2 ++
+ include/configs/sifive-fu540.h | 4 ----
+ 3 files changed, 4 insertions(+), 4 deletions(-)
+
+--- a/configs/qemu-riscv64_smode_defconfig
++++ b/configs/qemu-riscv64_smode_defconfig
+@@ -14,3 +14,5 @@
+ CONFIG_OF_PRIOR_STAGE=y
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_DM_MTD=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr}; fdt addr ${fdtcontroladdr};"
+--- a/configs/sifive_fu540_defconfig
++++ b/configs/sifive_fu540_defconfig
+@@ -27,3 +27,5 @@
+ CONFIG_SPL_CLK=y
+ CONFIG_DM_MTD=y
+ CONFIG_DM_RESET=y
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr}; fdt addr ${fdtcontroladdr};"
--- /dev/null
+Disable USE_PREBOOT as a workaround to boot failure triggered by
+initializing USB. (Closes: #973323, #980434)
+
+Reported upstream:
+
+ https://lists.denx.de/pipermail/u-boot/2021-January/438098.html
+
+Index: u-boot/configs/rockpro64-rk3399_defconfig
+===================================================================
+--- u-boot.orig/configs/rockpro64-rk3399_defconfig
++++ u-boot/configs/rockpro64-rk3399_defconfig
+@@ -12,7 +12,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI_SUPPORT=y
+ CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64"
+ CONFIG_DEBUG_UART=y
+-CONFIG_USE_PREBOOT=y
++CONFIG_USE_PREBOOT=n
+ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
+ CONFIG_DISPLAY_BOARDINFO_LATE=y
+ CONFIG_MISC_INIT_R=y
+
+Index: u-boot/configs/pinebook-pro-rk3399_defconfig
+===================================================================
+--- u-boot.orig/configs/pinebook-pro-rk3399_defconfig
++++ u-boot/configs/pinebook-pro-rk3399_defconfig
+@@ -12,7 +12,7 @@ CONFIG_SPL_SPI_SUPPORT=y
+ CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro"
+ CONFIG_DEBUG_UART=y
+ CONFIG_BOOTDELAY=3
+-CONFIG_USE_PREBOOT=y
++CONFIG_USE_PREBOOT=n
+ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb"
+ CONFIG_DISPLAY_BOARDINFO_LATE=y
+ CONFIG_MISC_INIT_R=y
--- /dev/null
+add-debian-revision-to-u-boot-version
+tools-generic-builds.patch
+mx53loco
+arndale/board-spl-rule.diff
+ensure-config-sandbox-for-make-env.patch
+am57xx/omap5_distro_bootcmd
+test-imagetools-test-fixes
+exynos/0001-arm-config-fix-default-console-only-to-specify-the-d.patch
+riscv64/qemu-riscv64_smode-sifive-fu540-fix-extlinux-define-.patch
+n900/bootz_and_raw_initrd.patch
+rk3399/disable-preboot
+pinetab/0001-configs-add-PineTab-defconfig.patch
+upstream/0001-efi_loader-switch-to-non-secure-mode-later.patch
+CVE-2022-34835.patch
+CVE-2022-33967.patch
+CVE-2022-33103.patch
+CVE-2022-30790.patch
+CVE-2022-30767.patch
+CVE-2022-2347.patch
+CVE-2024-57254.patch
+CVE-2024-57255.patch
+CVE-2024-57256.patch
+CVE-2024-57257.patch
+CVE-2024-57258-1.patch
+CVE-2024-57258-2.patch
+CVE-2024-57258-3.patch
+CVE-2024-57259.patch
--- /dev/null
+This patch allows testing in an alternate directory and also detects
+failures to execute commands, treating that as a failure.
+
+--- a/test/image/test-imagetools.sh
++++ b/test/image/test-imagetools.sh
+@@ -11,7 +11,7 @@
+ # make O=sandbox
+ # ./test/image/test-imagetools.sh
+
+-BASEDIR=sandbox
++BASEDIR=${BASEDIR:-"sandbox"}
+ SRCDIR=${BASEDIR}/boot
+ IMAGE_NAME="v1.0-test"
+ IMAGE_MULTI=linux.img
+@@ -94,7 +94,7 @@
+
+ echo -e "\nBuilding multi-file image..."
+ do_cmd ${MKIMAGE} -A x86 -O linux -T multi -n \"${IMAGE_NAME}\" \
+- -d ${files} ${IMAGE_MULTI}
++ -d ${files} ${IMAGE_MULTI} || exit 1
+ echo "done."
+ }
+
+@@ -102,10 +102,10 @@
+ extract_multi_image()
+ {
+ echo -e "\nExtracting multi-file image contents..."
+- do_cmd ${DUMPIMAGE} -T multi -p 0 -o ${DATAFILE0} ${IMAGE_MULTI}
+- do_cmd ${DUMPIMAGE} -T multi -p 1 -o ${DATAFILE1} ${IMAGE_MULTI}
+- do_cmd ${DUMPIMAGE} -T multi -p 2 -o ${DATAFILE2} ${IMAGE_MULTI}
+- do_cmd ${DUMPIMAGE} -T multi -p 2 -o ${TEST_OUT} ${IMAGE_MULTI}
++ do_cmd ${DUMPIMAGE} -T multi -p 0 -o ${DATAFILE0} ${IMAGE_MULTI} || exit 1
++ do_cmd ${DUMPIMAGE} -T multi -p 1 -o ${DATAFILE1} ${IMAGE_MULTI} || exit 1
++ do_cmd ${DUMPIMAGE} -T multi -p 2 -o ${DATAFILE2} ${IMAGE_MULTI} || exit 1
++ do_cmd ${DUMPIMAGE} -T multi -p 2 -o ${TEST_OUT} ${IMAGE_MULTI} || exit 1
+ echo "done."
+ }
+
+@@ -158,7 +158,7 @@
+ " > ${IMAGE_FIT_ITS}
+
+ echo -e "\nBuilding FIT image..."
+- do_cmd ${MKIMAGE} -f ${IMAGE_FIT_ITS} ${IMAGE_FIT_ITB}
++ do_cmd ${MKIMAGE} -f ${IMAGE_FIT_ITS} ${IMAGE_FIT_ITB} || exit 1
+ echo "done."
+ }
+
+@@ -166,10 +166,10 @@
+ extract_fit_image()
+ {
+ echo -e "\nExtracting FIT image contents..."
+- do_cmd ${DUMPIMAGE} -T flat_dt -p 0 -o ${DATAFILE0} ${IMAGE_FIT_ITB}
+- do_cmd ${DUMPIMAGE} -T flat_dt -p 1 -o ${DATAFILE1} ${IMAGE_FIT_ITB}
+- do_cmd ${DUMPIMAGE} -T flat_dt -p 2 -o ${DATAFILE2} ${IMAGE_FIT_ITB}
+- do_cmd ${DUMPIMAGE} -T flat_dt -p 2 -o ${TEST_OUT} ${IMAGE_FIT_ITB}
++ do_cmd ${DUMPIMAGE} -T flat_dt -p 0 -o ${DATAFILE0} ${IMAGE_FIT_ITB} || exit 1
++ do_cmd ${DUMPIMAGE} -T flat_dt -p 1 -o ${DATAFILE1} ${IMAGE_FIT_ITB} || exit 1
++ do_cmd ${DUMPIMAGE} -T flat_dt -p 2 -o ${DATAFILE2} ${IMAGE_FIT_ITB} || exit 1
++ do_cmd ${DUMPIMAGE} -T flat_dt -p 2 -o ${TEST_OUT} ${IMAGE_FIT_ITB} || exit 1
+ echo "done."
+ }
+
+@@ -181,8 +181,8 @@
+ local image="$1"
+
+ echo -e "\nListing image contents..."
+- do_cmd_redir ${MKIMAGE_LIST} ${MKIMAGE} -l ${image}
+- do_cmd_redir ${DUMPIMAGE_LIST} ${DUMPIMAGE} -l ${image}
++ do_cmd_redir ${MKIMAGE_LIST} ${MKIMAGE} -l ${image} || exit 1
++ do_cmd_redir ${DUMPIMAGE_LIST} ${DUMPIMAGE} -l ${image} || exit 1
+ echo "done."
+ }
+
--- /dev/null
+Description: Enable generic tools build
+Author: Hector Oron <zumbi@debian.org>
+
+--- a/tools/Makefile
++++ b/tools/Makefile
+@@ -52,7 +52,7 @@
+ hostprogs-y += mkenvimage
+ mkenvimage-objs := mkenvimage.o os_support.o lib/crc32.o
+
+-hostprogs-y += dumpimage mkimage
++hostprogs-y += dumpimage mkimage mksunxiboot kwboot
+ hostprogs-$(CONFIG_FIT_SIGNATURE) += fit_info fit_check_sign
+
+ hostprogs-$(CONFIG_CMD_BOOTEFI_SELFTEST) += file2include
--- /dev/null
+From 82d01f04facef1276cede067efd02d2a731ffe83 Mon Sep 17 00:00:00 2001
+From: Heinrich Schuchardt <xypron.glpk@gmx.de>
+Date: Sun, 24 Jan 2021 14:34:12 +0000
+Subject: [PATCH] efi_loader: switch to non-secure mode later
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Some ARMv7 boards using PSCI require to be in secure-mode when booted via
+'bootz' or 'bootm'. During distro-boot 'bootefi bootmgr' is called to check
+if booting via UEFI is possible.
+
+With the change we change the switch from secure mode to non-secure mode is
+moved from the UEFI subsystem setup to just before calling StartImage().
+
+Cc: Jernej Škrabec <jernej.skrabec@gmail.com>
+Reported by: Andre Przywara <andre.przywara@arm.com>
+Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
+---
+ cmd/bootefi.c | 4 ++++
+ lib/efi_loader/efi_setup.c | 4 ----
+ 2 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/cmd/bootefi.c b/cmd/bootefi.c
+index c8eb5c32b0..81dd8e0284 100644
+--- a/cmd/bootefi.c
++++ b/cmd/bootefi.c
+@@ -8,6 +8,7 @@
+ #define LOG_CATEGORY LOGC_EFI
+
+ #include <common.h>
++#include <bootm.h>
+ #include <charset.h>
+ #include <command.h>
+ #include <dm.h>
+@@ -338,6 +339,9 @@ static efi_status_t do_bootefi_exec(efi_handle_t handle, void *load_options)
+ efi_uintn_t exit_data_size = 0;
+ u16 *exit_data = NULL;
+
++ /* On ARM switch from EL3 or secure mode to EL2 or non-secure mode */
++ switch_to_non_secure_mode();
++
+ /* Call our payload! */
+ ret = EFI_CALL(efi_start_image(handle, &exit_data_size, &exit_data));
+ if (ret != EFI_SUCCESS) {
+diff --git a/lib/efi_loader/efi_setup.c b/lib/efi_loader/efi_setup.c
+index 5800cbf6d4..b1c5125032 100644
+--- a/lib/efi_loader/efi_setup.c
++++ b/lib/efi_loader/efi_setup.c
+@@ -6,7 +6,6 @@
+ */
+
+ #include <common.h>
+-#include <bootm.h>
+ #include <efi_loader.h>
+ #include <efi_variable.h>
+
+@@ -188,9 +187,6 @@ efi_status_t efi_init_obj_list(void)
+ /* Allow unaligned memory access */
+ allow_unaligned();
+
+- /* On ARM switch from EL3 or secure mode to EL2 or non-secure mode */
+- switch_to_non_secure_mode();
+-
+ /* Initialize root node */
+ ret = efi_root_node_register();
+ if (ret != EFI_SUCCESS)
+--
+2.30.2
+
--- /dev/null
+#!/usr/bin/make -f
+
+include /usr/share/dpkg/architecture.mk
+include /usr/share/dpkg/pkg-info.mk
+export DEBIAN_REVISION ?= $(shell echo $(DEB_VERSION) | sed -e 's,.*+dfsg,+dfsg,')
+
+ifneq ($(DEB_BUILD_GNU_TYPE),$(DEB_HOST_GNU_TYPE))
+export CROSS_COMPILE ?= $(DEB_HOST_GNU_TYPE)-
+cross_build_tools ?= y
+endif
+
+# Enable verbose build by default, disable when terse is specified.
+ifneq (,$(filter terse,$(DEB_BUILD_OPTIONS)))
+VERBOSE=0
+else
+VERBOSE=1
+endif
+
+# the upstream build passes LDFLAGS directly to ld instead of calling gcc for
+# linking; so instead of passing -Wl,foo in LDFLAGS as in automake builds, one
+# should set LDFLAGS to foo directly
+comma := ,
+LDFLAGS := $(patsubst -Wl$(comma)%,%,$(LDFLAGS))
+
+notools := $(filter pkg.uboot.notools,$(DEB_BUILD_PROFILES))
+
+# limit builds to only certain subarchitectures
+# e.g. pkg.uboot.subarch.rockchip will only build rockchip targets.
+ifeq (,$(filter pkg.uboot.subarch.%,$(DEB_BUILD_PROFILES)))
+TARGETSUBARCH = .
+else
+TARGETSUBARCH = $(patsubst pkg.uboot.subarch.%,%,$(filter pkg.uboot.subarch.%,$(DEB_BUILD_PROFILES)))
+endif
+
+# Enable debugging symbols and remove build paths
+export HOSTCFLAGS = -g -ffile-prefix-map=$(CURDIR)=.
+
+%:
+ dh $@
+
+configs/novena-rawsd_defconfig: configs/novena_defconfig
+ sed -e 's,CONFIG_SPL_FS_FAT=y,# CONFIG_SPL_FS_FAT is not set,' \
+ configs/novena_defconfig > configs/novena-rawsd_defconfig
+
+configs/am335x_boneblack_defconfig: configs/am335x_evm_defconfig
+ sed -e 's,CONFIG_OF_LIST=.*,CONFIG_OF_LIST="am335x-evm am335x-boneblack",g' \
+ configs/am335x_evm_defconfig > configs/am335x_boneblack_defconfig
+
+override_dh_auto_build-arch: TARGETARCH := $(DEB_HOST_ARCH)
+override_dh_auto_build-arch: build-targets
+ifeq ($(notools),)
+ override_dh_auto_build-arch: build-tools
+endif
+
+override_dh_auto_build-indep: TARGETARCH := all
+override_dh_auto_build-indep: build-targets
+
+build-targets: configs/novena-rawsd_defconfig configs/am335x_boneblack_defconfig
+ echo run build-targets for $(TARGETARCH)
+ set -e; grep ^$(TARGETARCH)[^a-z0-9] debian/targets \
+ | grep $(TARGETSUBARCH) \
+ | while read arch subarch platform bl31 targets; do \
+ builddir=debian/build/$$platform; \
+ case $$bl31 in \
+ /usr/lib/arm-trusted-firmware/*) export BL31=$$bl31 ;; \
+ *) targets="$$bl31 $$targets" ;\
+ unset BL31 ;; \
+ esac; \
+ case $$platform in \
+ novena-rawsd) targets="$$targets" ;\
+ ;; \
+ *) targets="$$targets uboot.elf" ;\
+ ;; \
+ esac;\
+ case $$subarch in \
+ -) subpackage="u-boot" ;\
+ ;; \
+ *) subpackage="u-boot-$$subarch" ;\
+ ;; \
+ esac;\
+ case $$arch in \
+ all:armhf) export CROSS_COMPILE=arm-linux-gnueabihf- ;;\
+ all:arm64) export CROSS_COMPILE=aarch64-linux-gnu- ;;\
+ all:mips) export CROSS_COMPILE=mips-linux-gnu- ;;\
+ all:mipsel) export CROSS_COMPILE=mipsel-linux-gnu- ;;\
+ all:mips64el) export CROSS_COMPILE=mips64el-linux-gnuabi64- ;;\
+ all:powerpc) export CROSS_COMPILE=powerpc-linux-gnu- ;;\
+ all:riscv64) export CROSS_COMPILE=riscv64-linux-gnu- ;;\
+ all:i386) export CROSS_COMPILE=i686-linux-gnu- ;;\
+ all:amd64) export CROSS_COMPILE=x86_64-linux-gnu- ;;\
+ *) ;; \
+ esac;\
+ case $$subarch in \
+ sunxi) export SCP=/dev/null ;;\
+ *) unset SCP ;;\
+ esac;\
+ mkdir -p $$builddir; \
+ dh_auto_build -- V=$(VERBOSE) O=$$builddir $${platform}_defconfig; \
+ sed -i -e 's,CONFIG_FIT_SIGNATURE=y,# CONFIG_FIT_SIGNATURE is not set,g' $$builddir/.config; \
+ dh_auto_build -- V=$(VERBOSE) O=$$builddir; \
+ case "$$targets" in \
+ *uboot.elf*) \
+ install -m 644 $$builddir/u-boot $$builddir/uboot.elf; \
+ $${CROSS_COMPILE}strip --remove-section=.comment \
+ --remove-section=.note \
+ $$builddir/uboot.elf; \
+ ;; \
+ esac; \
+ for target in $$targets; do \
+ chmod -x $$builddir/$$target; \
+ echo $$builddir/$$target /usr/lib/u-boot/$$platform/ \
+ >> debian/build/targets.$$subarch; \
+ echo $$platform >> debian/build/platforms.$$subarch; \
+ done ; \
+ cp $$builddir/.config $$builddir/config.$$platform; \
+ echo $$builddir/config.$$platform /usr/share/doc/$$subpackage/configs/ \
+ >> debian/build/targets.$$subarch; \
+ done
+
+TOOLSDIR := debian/build/tools
+build-tools:
+ dh_auto_build -- V=$(VERBOSE) O=$(TOOLSDIR) CROSS_COMPILE=$(CROSS_COMPILE) tools-only_defconfig
+ cp $(TOOLSDIR)/.config $(TOOLSDIR)/config
+ # board-independent tools
+ dh_auto_build -- V=$(VERBOSE) O=$(TOOLSDIR) \
+ CROSS_COMPILE=$(CROSS_COMPILE) \
+ CROSS_BUILD_TOOLS=$(cross_build_tools) \
+ NO_SDL=1 \
+ tools-only
+
+# Only test when tools are built and native.
+override_dh_auto_test-arch:
+ ifeq ($(notools)$(cross_build_tools),)
+ BASEDIR=$(TOOLSDIR) test/image/test-imagetools.sh
+ endif
+override_dh_auto_test-indep:
+
+# Do not spend time searching for an install target in Makefile.
+override_dh_auto_install:
+
+override_dh_clean:
+ rm -rf debian/build/
+ rm -f configs/novena-rawsd_defconfig
+ rm -f configs/am335x_boneblack_defconfig
+ rm -f linux.itb linux.its
+ dh_clean
+ find . -type d -name __pycache__ -delete
+
+override_dh_gencontrol:
+ debian/bin/update-substvars
+ dh_gencontrol
--- /dev/null
+3.0 (quilt)
--- /dev/null
+tools/logos/solidrun.bmp
--- /dev/null
+# ARCH subarch platform target
+# --------------------------------------------
+armel - dockstar u-boot.kwb
+
+# Ian Campbell <ijc@debian.org>
+armel - dreamplug u-boot.kwb
+
+# drEagle <drEagle@doukki.net>
+armel - guruplug u-boot.kwb
+
+# Vagrant Cascadian <vagrant@debian.org>, rpi B 256M
+armel rpi rpi u-boot.bin
+
+# Romain Perier <romain.perier@gmail.com>, rpi zero w
+armel rpi rpi_0_w u-boot.bin
+
+# drEagle <drEagle@doukki.net>
+# Rick Thomas <rbthomas@rcthomas.org>
+armel - sheevaplug u-boot.kwb
+
+armhf exynos arndale u-boot.bin spl/arndale-spl.bin
+
+# Joost van Zwieten <joostvanzwieten@gmail.com>, Odroid-U3
+armhf exynos odroid u-boot.bin
+
+# Vagrant Cascadian <vagrant@debian.org>, Odroid-XU4
+armhf exynos odroid-xu3 u-boot.bin
+
+# Marek Vasut <marex@denx.de>
+armhf imx dh_imx6 u-boot-with-spl.imx
+
+# Robert Nelson <robertcnelson@gmail.com>
+armhf imx mx53loco u-boot.imx
+
+# Steve Langasek <vorlon@debian.org>, CuBox-i4
+# Vagrant Cascadian <vagrant@debian.org>, CuBox-i4pro, Cubox-i4x4, hummingboard-i1, hummingboard-i2ex
+# Rainer Dorsch <ml@bokomoko.de>, CuBox-i2u (i2u-300-d)
+# Rick Thomas <rbthomas@pobox.com>, Cubox-i4x4, Cubox-i4PRO
+armhf imx mx6cuboxi u-boot.img SPL
+
+# Martyn Welch <martyn.welch@collabora.com>
+armhf imx mx6qsabrelite u-boot-dtb.imx
+
+# Hector Oron <zumbi@debian.org>
+armhf imx nitrogen6q u-boot-dtb.imx
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf imx novena u-boot.img SPL
+armhf imx novena-rawsd SPL
+
+# Michael Fladischer <michael@fladi.at>
+armhf imx udoo u-boot.img SPL
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf imx usbarmory u-boot.imx
+
+# Vagrant Cascadian <vagrant@debian.org>
+# Robert Nelson <robertcnelson@gmail.com>
+armhf imx wandboard u-boot.img SPL
+
+# Vagrant Cascadian <vagrant@debian.org>
+# Andrew M.A. Cater <amacater@galactic.demon.co.uk>
+armhf omap am335x_boneblack u-boot.img MLO
+armhf omap am335x_evm u-boot.img MLO
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf omap am57xx_evm u-boot.img MLO
+
+armhf omap dra7xx_evm u-boot.img MLO
+
+# Robert Nelson <robertcnelson@gmail.com>
+armhf omap igep00x0 u-boot.img MLO
+
+armhf omap nokia_rx51 u-boot.bin
+
+# Robert Nelson <robertcnelson@gmail.com>
+armhf omap omap3_beagle u-boot.img MLO
+
+# Robert Nelson <robertcnelson@gmail.com>
+armhf omap omap4_panda u-boot.img MLO
+
+# Vagrant Cascadian <vagrant@debian.org>, 2GB and 4GB variants
+armhf rockchip firefly-rk3288 u-boot.bin u-boot.img spl/u-boot-spl.bin idbloader.img
+
+# Vagrant Cascadian <vagrant@debian.org>, Raspberry PI 2B
+armhf rpi rpi_2 u-boot.bin
+
+# Ryan Finnie <ryan@finnie.org>
+armhf rpi rpi_3_32b u-boot.bin
+
+# Lucas Nussbaum <lucas@debian.org>
+# Andreas Henriksson <andreas@fatal.se>
+armhf rpi rpi_4_32b u-boot.bin
+
+# Christian Kastner <debian@kvr.at>
+armhf sunxi A10-OLinuXino-Lime u-boot-sunxi-with-spl.bin
+
+# Benedikt Wildenhain <esperanto@benedikt-wildenhain.de>
+armhf sunxi A10s-OLinuXino-M u-boot-sunxi-with-spl.bin
+
+# Karsten Merker <merker@debian.org>
+armhf sunxi A20-Olimex-SOM-EVB u-boot-sunxi-with-spl.bin
+
+# Christian Kastner <debian@kvr.at>
+armhf sunxi A20-OLinuXino-Lime u-boot-sunxi-with-spl.bin
+
+# Karsten Merker <merker@debian.org>
+armhf sunxi A20-OLinuXino-Lime2 u-boot-sunxi-with-spl.bin
+
+# Andreas B. Mundt <andi@debian.org>
+armhf sunxi A20-OLinuXino-Lime2-eMMC u-boot-sunxi-with-spl.bin
+
+# Arne Ploese <aploese@gmx.de>
+armhf sunxi A20-OLinuXino_MICRO u-boot-sunxi-with-spl.bin
+
+# Ian Campbell <ijc@debian.org>
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi Bananapi u-boot-sunxi-with-spl.bin
+
+# Karsten Merker <merker@debian.org>
+armhf sunxi Bananapro u-boot-sunxi-with-spl.bin
+
+# Lucas Nussbaum <lucas@debian.org>
+armhf sunxi bananapi_m2_berry u-boot-sunxi-with-spl.bin
+
+# Bernhard Wörner <bewoern1@gmail.com>
+armhf sunxi Bananapi_M2_Ultra u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi CHIP u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi Cubieboard u-boot-sunxi-with-spl.bin
+
+# Ian Campbell <ijc@debian.org>
+# Karsten Merker <merker@debian.org>
+armhf sunxi Cubieboard2 u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi Cubieboard4 u-boot-sunxi-with-spl.bin
+
+# Ian Campbell <ijc@debian.org>
+# Robert Nelson <robertcnelson@gmail.com>
+# Karsten Merker <merker@debian.org>
+armhf sunxi Cubietruck u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi Cubietruck_plus u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi Lamobo_R1 u-boot-sunxi-with-spl.bin
+
+# Robert Hegner <rhegner@hsr.ch>
+armhf sunxi Linksprite_pcDuino u-boot-sunxi-with-spl.bin
+
+# Patrice Go <patgsiosisr@gmail.com>
+armhf sunxi Linksprite_pcDuino3 u-boot-sunxi-with-spl.bin
+
+# Jochen Sprickerhof <debian@jochen.sprickerhof.de>
+armhf sunxi Mini-X u-boot-sunxi-with-spl.bin
+
+# Paul Tagliamonte <paultag@debian.org>
+armhf sunxi nanopi_neo u-boot-sunxi-with-spl.bin
+
+# Philip Hands <phil@hands.com>
+armhf sunxi nanopi_neo_air u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>, Orange PI Plus2
+armhf sunxi orangepi_plus u-boot-sunxi-with-spl.bin
+
+# Mateusz Łukasik <mati75@linuxmint.pl>, Orange PI Zero
+armhf sunxi orangepi_zero u-boot-sunxi-with-spl.bin
+
+# Bernhard <bewoern1@gmail.com>
+armhf sunxi Sinovoip_BPI_M3 u-boot-sunxi-with-spl.bin
+
+# Ian Campbell <ijc@debian.org>
+armhf tegra jetson-tk1 u-boot-tegra.bin
+
+# Neil Armstrong <narmstrong@baylibre.com>
+arm64 amlogic khadas-vim u-boot.bin
+arm64 amlogic khadas-vim2 u-boot.bin
+
+# Frederic Danis <frederic.danis@collabora.com>
+arm64 amlogic libretech-cc u-boot.bin
+
+# Neil Armstrong <narmstrong@baylibre.com>
+arm64 amlogic nanopi-k2 u-boot.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+arm64 amlogic odroid-c2 u-boot.bin
+
+# Reco <bugs@enotuniq.net>
+arm64 amlogic odroid-n2 u-boot.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+arm64 mvebu mvebu_espressobin-88f3720 u-boot.bin arch/arm/dts/armada-3720-espressobin.dtb
+
+# Riku Voipio <riku.voipio@linaro.org>
+arm64 qcom dragonboard410c u-boot.bin
+arm64 qcom dragonboard820c u-boot.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+arm64 rockchip firefly-rk3399 /usr/lib/arm-trusted-firmware/rk3399/bl31.elf u-boot.img u-boot.bin u-boot-nodtb.bin spl/u-boot-spl.bin arch/arm/dts/rk3399-firefly.dtb u-boot.itb idbloader.img
+
+# Vagrant Cascadian <vagrant@debian.org>
+arm64 rockchip pinebook-pro-rk3399 /usr/lib/arm-trusted-firmware/rk3399/bl31.elf u-boot.img u-boot.bin u-boot-nodtb.bin spl/u-boot-spl.bin arch/arm/dts/rk3399-pinebook-pro.dtb u-boot.itb idbloader.img
+
+# Vagrant Cascadian <vagrant@debian.org>
+arm64 rockchip rockpro64-rk3399 /usr/lib/arm-trusted-firmware/rk3399/bl31.elf u-boot.img u-boot.bin u-boot-nodtb.bin spl/u-boot-spl.bin arch/arm/dts/rk3399-rockpro64.dtb u-boot.itb idbloader.img
+
+# Vagrant Cascadian <vagrant@debian.org>
+arm64 rockchip rock64-rk3328 /usr/lib/arm-trusted-firmware/rk3328/bl31.elf u-boot.img u-boot.bin u-boot-nodtb.bin spl/u-boot-spl.bin tpl/u-boot-tpl.bin arch/arm/dts/rk3328-rock64.dtb u-boot.itb idbloader.img
+
+# Vagrant Cascadian <vagrant@debian.org>
+arm64 rockchip puma-rk3399 /usr/lib/arm-trusted-firmware/rk3399/bl31.elf u-boot.img u-boot.bin u-boot-nodtb.bin spl/u-boot-spl.bin arch/arm/dts/rk3399-puma-haikou.dtb u-boot.itb idbloader.img
+
+# Walter Lozano <walter.lozano@collabora.com>
+arm64 rockchip rock-pi-4-rk3399 /usr/lib/arm-trusted-firmware/rk3399/bl31.elf u-boot.img u-boot.bin u-boot-nodtb.bin spl/u-boot-spl.bin arch/arm/dts/rk3399-rock-pi-4a.dtb arch/arm/dts/rk3399-rock-pi-4b.dtb u-boot.itb idbloader.img
+
+# Ryan Finnie <ryan@finnie.org>
+arm64 rpi rpi_3 u-boot.bin
+
+# Lucas Nussbaum <lucas@debian.org>
+# Andreas Henriksson <andreas@fatal.se>
+arm64 rpi rpi_4 u-boot.bin
+
+# Denis Pynkin <denis.pynkin@collabora.com>
+arm64 rpi rpi_arm64 u-boot.bin
+
+# Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz>
+arm64 sunxi a64-olinuxino /usr/lib/arm-trusted-firmware/sun50i_a64/bl31.bin u-boot.bin spl/sunxi-spl.bin u-boot-nodtb.bin arch/arm/dts/sun50i-a64-olinuxino.dtb u-boot-sunxi-with-spl.fit.itb
+
+# Philip Rinn <rinni@inventati.org>
+arm64 sunxi a64-olinuxino-emmc /usr/lib/arm-trusted-firmware/sun50i_a64/bl31.bin u-boot.bin spl/sunxi-spl.bin u-boot-nodtb.bin arch/arm/dts/sun50i-a64-olinuxino-emmc.dtb u-boot-sunxi-with-spl.fit.itb
+
+# Domenico Andreoli <cavok@debian.org>
+arm64 sunxi nanopi_neo2 /usr/lib/arm-trusted-firmware/sun50i_a64/bl31.bin u-boot.bin spl/sunxi-spl.bin u-boot-nodtb.bin arch/arm/dts/sun50i-h5-nanopi-neo2.dtb u-boot-sunxi-with-spl.fit.itb
+
+# Steev Klimaszewski <steev@kali.org>
+arm64 sunxi nanopi_neo_plus2 /usr/lib/arm-trusted-firmware/sun50i_a64/bl31.bin u-boot.bin spl/sunxi-spl.bin u-boot-nodtb.bin arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dtb u-boot-sunxi-with-spl.fit.itb
+
+# Frederic Danis <frederic.danis@collabora.com>
+arm64 sunxi orangepi_zero_plus2 /usr/lib/arm-trusted-firmware/sun50i_a64/bl31.bin u-boot.bin spl/sunxi-spl.bin u-boot-nodtb.bin arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dtb u-boot-sunxi-with-spl.fit.itb
+
+# harry88@gmx.ph
+arm64 sunxi orangepi_one_plus /usr/lib/arm-trusted-firmware/sun50i_h6/bl31.bin u-boot.bin spl/sunxi-spl.bin u-boot-nodtb.bin arch/arm/dts/sun50i-h6-orangepi-one-plus.dtb u-boot-sunxi-with-spl.fit.itb
+
+# Vagrant Cascadian <vagrant@debian.org>
+arm64 sunxi pine64_plus /usr/lib/arm-trusted-firmware/sun50i_a64/bl31.bin u-boot.bin spl/sunxi-spl.bin u-boot-nodtb.bin arch/arm/dts/sun50i-a64-pine64-plus.dtb arch/arm/dts/sun50i-a64-pine64.dtb u-boot-sunxi-with-spl.fit.itb
+
+# Sunil Mohan Adapa <sunil@medhas.org>
+arm64 sunxi pine64-lts /usr/lib/arm-trusted-firmware/sun50i_a64/bl31.bin u-boot.bin spl/sunxi-spl.bin u-boot-nodtb.bin arch/arm/dts/sun50i-a64-pine64-lts.dtb arch/arm/dts/sun50i-a64-pine64.dtb u-boot-sunxi-with-spl.fit.itb
+
+# Vagrant Cascadian <vagrant@debian.org>
+arm64 sunxi pinebook /usr/lib/arm-trusted-firmware/sun50i_a64/bl31.bin u-boot.bin spl/sunxi-spl.bin u-boot-nodtb.bin arch/arm/dts/sun50i-a64-pinebook.dtb u-boot-sunxi-with-spl.fit.itb
+
+# Benoit Delcour <benoit.delcour@gmail.com> (1.2)
+# Arnaud Ferraris <arnaud.ferraris@collabora.com> (1.1, 1.2)
+arm64 sunxi pinephone /usr/lib/arm-trusted-firmware/sun50i_a64/bl31.bin u-boot.bin spl/sunxi-spl.bin u-boot-nodtb.bin arch/arm/dts/sun50i-a64-pinephone-1.1.dtb arch/arm/dts/sun50i-a64-pinephone-1.2.dtb u-boot-sunxi-with-spl.fit.itb
+
+# Arnaud Ferraris <arnaud.ferraris@collabora.com>
+arm64 sunxi pinetab /usr/lib/arm-trusted-firmware/sun50i_a64/bl31.bin u-boot.bin spl/sunxi-spl.bin u-boot-nodtb.bin arch/arm/dts/sun50i-a64-pinetab.dtb u-boot-sunxi-with-spl.fit.itb
+
+# Jonas Smedegaard <dr@jones.dk>
+arm64 sunxi teres_i /usr/lib/arm-trusted-firmware/sun50i_a64/bl31.bin u-boot.bin spl/sunxi-spl.bin u-boot-nodtb.bin arch/arm/dts/sun50i-a64-teres-i.dtb u-boot-sunxi-with-spl.fit.itb
+
+# Vagrant Cascadian <vagrant@debian.org>
+arm64 tegra p2371-2180 u-boot.bin
+
+avr32 - hammerhead u-boot.img
+
+# Hector Oron <zumbi@debian.org>
+riscv64 sifive sifive_fu540 u-boot.bin
+
+sh4 - r2dplus u-boot.bin
+
+all:amd64 qemu qemu-x86_64 u-boot.bin u-boot.rom
+all:armhf qemu qemu_arm u-boot.bin
+all:arm64 qemu qemu_arm64 u-boot.bin
+all:i386 qemu qemu-x86 u-boot.bin u-boot.rom
+all:powerpc qemu qemu-ppce500 u-boot.bin
+all:riscv64 qemu qemu-riscv64 u-boot.bin
+all:riscv64 qemu qemu-riscv64_smode u-boot.bin
--- /dev/null
+doc/board/amlogic/khadas-vim.rst
+doc/board/amlogic/khadas-vim2.rst
+doc/board/amlogic/libretech-cc.rst
+doc/board/amlogic/nanopi-k2.rst
+doc/board/amlogic/odroid-c2.rst
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets amlogic
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-amlogic binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-amlogic binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot-amlogic binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot-amlogic: description-synopsis-starts-with-article
+
--- /dev/null
+doc/README.odroid
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets exynos
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-exynos binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-exynos binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot-exynos binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot-exynos: description-synopsis-starts-with-article
+
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+MX53LOCO:
+
+ dd conv=fsync,notrunc bs=1024 if=u-boot.imx of=/dev/sdX seek=1
+
+wandboard (quad, dual-lite and solo):
+
+ dd conv=fsync,notrunc if=/usr/lib/u-boot/wandboard/SPL of=/dev/mmcblk0 bs=1k seek=1
+ dd conv=fsync,notrunc if=/usr/lib/u-boot/wandboard/u-boot.img of=/dev/mmcblk0 bs=1k seek=69
+
+mx6cuboxi (Cubox-i and Hummingboard):
+
+ dd conv=fsync,notrunc if=/usr/lib/u-boot/mx6cuboxi/SPL of=/dev/mmcblk0 bs=1k seek=1
+ dd conv=fsync,notrunc if=/usr/lib/u-boot/mx6cuboxi/u-boot.img of=/dev/mmcblk0 bs=1k seek=69
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets imx
--- /dev/null
+/usr/lib/u-boot/novena/u-boot.img /usr/lib/u-boot/novena-rawsd/u-boot.img
+/usr/lib/u-boot/novena/uboot.elf /usr/lib/u-boot/novena-rawsd/uboot.elf
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-imx binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-imx binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot-imx binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot-imx: description-synopsis-starts-with-article
+
--- /dev/null
+doc/README.marvell
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets mvebu
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-mvebu binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-mvebu binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot-mvebu binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot-mvebu: description-synopsis-starts-with-article
+
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+The BeagleBone Black (am335x_boneblack) can be flashed to microSD or eMMC
+directly:
+
+ dd conv=fsync,notrunc seek=256 if=/usr/lib/u-boot/am335x_evm/MLO of=/dev/mmcblkX
+ dd conv=fsync,notrunc seek=768 if=/usr/lib/u-boot/am335x_evm/u-boot.img of=/dev/mmcblkX
+
+The am335x_evm supports multiple targets (BeagleBone, BeagleBone
+Black, BeagleBone Green, PocketBeagle) and can be installed to the
+same offsets, but the first partition should start at 4MB (sector
+8192) rather than the typical 1MB (sector 2048), as it is large enough
+to overlap with the start of the partition.
+
+On OpenPandora:
+
+ modprobe nand_omap2 mtdblock
+ dd conv=fsync,notrunc if=/usr/lib/u-boot/omap3_pandora/u-boot.bin of=/dev/mtdblock1
+ -- Vagrant Cascadian <vagrant@debian.org>, Thu, 16 May 2019 20:57:30 -0700
--- /dev/null
+doc/README.nokia_rx51
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets omap
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-omap binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-omap binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot-omap binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot-omap: description-synopsis-starts-with-article
+
--- /dev/null
+=== DragonBoard 410c ===
+
+You can use fastboot (from the android-tools-fastboot package) to
+boot U-Boot or flash U-Boot on your DragonBoard 410c. Connect your
+PC via a USB cable to the micro-USB port on the DragonBoard. Hold
+the volume down (-) button (S4) and turn on the device to go into
+fastboot mode.
+
+You have two options: you can load U-Boot without flashing it (for
+example to test U-Boot) or you can flash it to the device.
+
+In order to load U-Boot without flashing it, run this command:
+
+ fastboot boot /usr/lib/u-boot/dragonboard410c/u-boot.img
+
+In order to flash U-Boot to the boot partition, run:
+
+ fastboot flash boot /usr/lib/u-boot/dragonboard410c/u-boot.img
+
+You have to reset your device after "fastboot flash boot" to start
+U-Boot.
+
+When U-Boot starts, it will try to boot from attached devices in
+the following order:
+
+* USB
+* External SD card
+* Internal SD card (eMMC)
+
+At the moment, there's no graphics support, so you will only see the
+U-Boot output if you have the optional serial console adapter.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets qcom
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-qcom binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-qcom binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot-qcom binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot-qcom: description-synopsis-starts-with-article
+
--- /dev/null
+
+Booting a qemu/kvm guest with u-boot
+====================================
+
+To boot a qemu guest with u-boot, start qemu-system with the '-bios
+u-boot.bin' option. Use the full path to the u-boot.bin file that corresponds
+with the archicture you are trying to boot.
+
+
+Booting from disk
+-----------------
+
+To allow a qemu guest to boot from disk, you need a u-boot config file on the
+disk. There is no need to install u-boot in the guest, as you are passing
+u-boot directly to qemu. The u-boot config file can be automatically created
+by installing the u-boot-menu package. Alternatively, the flash-kernel package
+can also create u-boot config files, but it currently doesn't recognise qemu
+guests.
+
+
+Netboot
+-------
+
+u-boot supports the e1000 network driver to boot from the network. Please note
+that u-boot will initially output "Net: No ethernet found.", before
+continuing with the netboot.
+
+
+Device tree
+-----------
+
+On architectures where a device tree file is needed to boot, qemu will
+generate the device tree based on the virtual hardware that is configured.
+u-boot should be able to find this data at the default address where u-boot
+looks for this data (${fdt_addr}, so you should use that address in your
+u-boot script.
+
+
+Examples
+========
+
+TODO
+
+
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets qemu
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-qemu binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-qemu binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot-qemu binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot-qemu: description-synopsis-starts-with-article
+
+
+# These are binary firmware blobs
+u-boot-qemu binary: arch-independent-package-contains-binary-or-object usr/lib/u-boot/*/uboot.elf
--- /dev/null
+u-boot (2017.07+dfsg1-2) unstable; urgency=medium
+
+ The firefly-rk3288 target now requires using the instructions for
+ BACK_TO_BROM.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 27 Jul 2017 23:34:43 -0400
--- /dev/null
+== Installation ==
+
+On most rockchip platforms, u-boot can be installed to microSD:
+
+ dd conv=fsync,notrunc if=/usr/lib/u-boot/BOARD/idbloader.img of=/dev/DEVICE seek=64
+ dd conv=fsync,notrunc if=/usr/lib/u-boot/BOARD/u-boot.img of=/dev/DEVICE seek=16384
+
+Where device is the raw device name of the microSD card or USB to
+microSD adapter.
+
+In order to get it to boot from microSD, it may require overwriting
+the vendor-supplied u-boot that ships with the board.
+
+See README.rockchip for more information.
--- /dev/null
+doc/README.rockchip
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets rockchip
+cp arch/arm/mach-rockchip/make_fit_atf.py debian/build/rockchip_make_fit_atf
+sed -i -e 's,/usr/bin/env python.*,/usr/bin/python3,g' debian/build/rockchip_make_fit_atf
+echo debian/build/rockchip_make_fit_atf /usr/bin/
+echo debian/bin/u-boot-install-rockchip /usr/bin/
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-rockchip binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-rockchip binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot-rockchip binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot-rockchip: description-synopsis-starts-with-article
+
--- /dev/null
+== Installation ==
+
+The raspberry pi targets can be installed by copying u-boot.bin to the
+FAT partition of the raspberry pi boot firmware:
+
+ mkdir -p /boot/fat
+ mount /dev/mmcblk0p1 /boot/fat
+ cp -vb /usr/lib/u-boot/TARGET/u-boot.bin /boot/fat/
+
+Then specify the u-boot.bin as the kernel to load in config.txt on the
+FAT partition:
+
+ kernel u-boot.bin
+
+It should then support booting off of MMC and USB devices with serial
+console or HDMI with USB keyboard.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets rpi
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-rpi binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-rpi binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot-rpi binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot-rpi: description-synopsis-starts-with-article
+
--- /dev/null
+doc/board/sifive/fu540.rst
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets sifive
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-sifive binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-sifive binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot-sifive binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot-sifive: description-synopsis-starts-with-article
+
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+Many sunxi boards (Bananapi, Cubieboard) can be written to SD directly:
+
+ dd conv=fsync,notrunc if=/usr/lib/u-boot/BOARD/u-boot-sunxi-with-spl.bin of=/dev/mmcblkX bs=1024 seek=8
+
+Pine64 plus can be installed using the u-boot-install-sunxi utility.
--- /dev/null
+board/sunxi/README.sunxi64
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets sunxi
+
+echo debian/bin/u-boot-install-sunxi /usr/bin/
--- /dev/null
+usr/bin/u-boot-install-sunxi usr/bin/u-boot-install-sunxi64
+usr/share/man/man8/u-boot-install-sunxi.8.gz usr/share/man/man8/u-boot-install-sunxi64.8.gz
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-sunxi binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-sunxi binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot-sunxi binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot-sunxi: description-synopsis-starts-with-article
+
--- /dev/null
+debian/manpages/u-boot-install-sunxi.8
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself from a host
+system using the Linux_For_Tegra tools from NVIDIA's developer portal:
+https://developer.nvidia.com/embedded/linux-tegra-archive
+
+=== Jetson TK1 ===
+
+sudo ./flash.sh -L /usr/lib/u-boot/jetson-tk1/u-boot-dtb-tegra.bin jetson-tk1 mmcblk1p1
+
+Please note that L4T R19.3 is currently required (the image does not
+boot if flashed with L4T R21.1 through R21.4).
+
+=== Jetson TX1 ===
+
+sudo ./flash.sh -L /usr/lib/u-boot/p2371-2180/u-boot-dtb.bin jetson-tx1 mmcblk0p1
+
+=== TODO ===
+
+TODO: Figure out how to do this with tools within Debian,
+e.g. tegrarcm and cbootimage.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets tegra
--- /dev/null
+usr/lib/u-boot/p2371-2180/uboot.elf usr/lib/u-boot/p2371-2180/u-boot
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-tegra binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-tegra binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot-tegra binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot-tegra: description-synopsis-starts-with-article
+
--- /dev/null
+debian/build/tools/config
--- /dev/null
+# example env configs
+debian/env-configs/*.config
+tools/env/fw_env.config
--- /dev/null
+debian/build/tools/tools/dumpimage usr/bin
+debian/build/tools/tools/kwboot usr/bin
+debian/build/tools/tools/mkenvimage usr/bin
+debian/build/tools/tools/mkimage usr/bin
+debian/build/tools/tools/mksunxiboot usr/bin
--- /dev/null
+doc/kwboot.1
+doc/mkimage.1
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+Some examples using mtd-utils:
+
+SheevaPlug:
+
+ sudo flash_erase /dev/mtd0 0 0
+ sudo nandwrite -p /dev/mtd0 /usr/lib/u-boot/sheevaplug/u-boot.kwb
+
+GuruPlug:
+
+ sudo flash_erase /dev/mtd0 0 0
+ sudo nandwrite -p /dev/mtd0 /usr/lib/u-boot/guruplug/u-boot.kwb
+
+DreamPlug:
+
+ At this point you cannot write to the SPI/NOR flash from Linux,
+ so you will need to replace U-Boot from within U-Boot.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets -
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot binary: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/*/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot binary: statically-linked-binary usr/lib/u-boot/*/uboot.elf
+
+# These are bootloader binaries, and have no external dependency information
+u-boot binary: shared-library-lacks-prerequisites usr/lib/u-boot/*/uboot.elf
+
+u-boot: description-synopsis-starts-with-article
+
--- /dev/null
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+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+=mIYF
+-----END PGP PUBLIC KEY BLOCK-----
--- /dev/null
+version=4
+
+opts=dversionmangle=auto,\
+ pgpmode=auto,\
+ repacksuffix=+dfsg,\
+ uversionmangle=s/-rc/~rc/ \
+https://ftp.denx.de/pub/@PACKAGE@/ \
+@PACKAGE@@ANY_VERSION@@ARCHIVE_EXT@
projects / u-boot.git / commitdiff