[dgit import tarball u-boot 2016.09+dfsg1-2 u-boot_2016.09+dfsg1-2.debian.tar.xz]
--- /dev/null
+#!/bin/sh
+target=$1
+docs="$2"
+subarch_install_file="debian/build/targets.${target}"
+if [ -f "${subarch_install_file}" ]; then
+ cat "${subarch_install_file}"
+fi
+for doc in ${docs} ; do
+ echo ${doc} /usr/share/doc/u-boot-${target}/
+done
--- /dev/null
+#!/bin/sh
+
+target_file=debian/targets
+
+awk '/^[a-z0-9]/{print $2}' ${target_file} | sort -u | while read subarch ; do
+ case ${subarch} in
+ -) package=u-boot ;;
+ *) package=u-boot-${subarch} ;;
+ esac
+ overrides=debian/${package}.lintian-overrides
+
+ cat >${overrides}<<EOF
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+EOF
+
+ sed -n "/^[a-z0-9].*[[:space:]]$subarch[[:space:]]/p" ${target_file} | while read arch subarch2 platform targets ; do
+ echo "${package} [${arch}]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/${platform}/uboot.elf"
+ done >> ${overrides}
+
+ cat >>${overrides}<<EOF
+
+# These bootloaders need to be statically linked.
+EOF
+
+ sed -n "/^[a-z0-9].*[[:space:]]$subarch[[:space:]]/p" ${target_file} | while read arch subarch2 platform targets ; do
+ echo "${package} [${arch}]: statically-linked-binary usr/lib/u-boot/${platform}/uboot.elf"
+ done >> ${overrides}
+
+ cat >>${overrides}<<EOF
+
+${package}: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+${package}: spelling-error-in-copyright Synopsys Synopsis
+EOF
+done
+
+package=u-boot-tools
+cat >debian/${package}.lintian-overrides<<EOF
+# Synopsys is the name of a company, not a misspelling.
+${package}: spelling-error-in-copyright Synopsys Synopsis
+EOF
--- /dev/null
+#!/bin/sh
+for file in debian/build/platforms.* ; do
+ subarch=$(echo ${file} | sed -e 's,.*platforms.,,g')
+ case "${subarch}" in
+ -) package=u-boot ;;
+ *) package=u-boot-${subarch} ;;
+ esac
+ echo $(LC_ALL=C sort -u ${file}) | \
+ sed -e 's, ,${Newline},g' \
+ -e 's,^,uboot:platforms=${Newline}Included platforms:${Newline},g' \
+ >> debian/${package}.substvars
+done
--- /dev/null
+u-boot (2016.09+dfsg1-2) unstable; urgency=medium
+
+ * odroid-xu3: Add patch to use the default bootdelay from
+ distro_bootcmd.
+ * Remove Philip Rinn from Cubieboard2 testers.
+ * u-boot-rpi: Add documentation for configuring raspberry pi to use
+ u-boot.
+ * debian/watch: Add signature checking of upstream tarball.
+ * u-boot-tools: Add device-tree-compiler to Recommends. Thanks to
+ Pierre-Hugues Husson. (Closes: #841351).
+ * Apply patches from v2016.09.01:
+ - 0001-Revert-Increase-default-of-CONFIG_SYS_MALLOC_F_LEN-f.patch
+ - 0002-Revert-image-fit-switch-ENOLINK-to-ENOENT.patch
+ * Remove openrd targets, as they do not boot (Closes: #837629).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 23 Oct 2016 19:36:36 -0700
+
+u-boot (2016.09+dfsg1-1) unstable; urgency=medium
+
+ * New upstream version.
+
+ [ Vagrant Cascadian ]
+ * Remove Ian Campbell from the list of arndale testers.
+ * Remove Joey Hess from the A10-OLinuXino-Lime testers.
+ * [armhf] u-boot-sunxi: Enable the CHIP target.
+ * Refresh and remove patches applied upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 12 Sep 2016 12:43:29 -0700
+
+u-boot (2016.09~rc2+dfsg1-1) experimental; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * New upstream release candidate.
+ * Simplify cross-building in debian/rules.
+ * Refresh debian/patches/tools-only-in-no-dot-config-targets.diff
+ * u-boot-omap:
+ - Add omap3_pandora target.
+ - Add patches to switch omap3-pandora to use distro bootcmd.
+ * Add patches from upstream to fix cache issues.
+
+ [ Martin Michlmayr ]
+ * Generate bootable image for DragonBoard 410c (Closes: #835656).
+
+ [ Vagrant Cascadian ]
+ * [arm64] Fix cross-building of DragonBoard 410c:
+ - Allow skales:native to satisfy build-dependency.
+ - Add build-depends on libfdt-dev:native.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 30 Aug 2016 11:36:35 -0700
+
+u-boot (2016.09~rc1+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream.
+ * Remove redundant u-boot-rockchip.docs, as it is handled in the
+ u-boot-rockchip.install file.
+ * u-boot-sunxi: Install README for pine64 target.
+ * Add build-depends on python:any [armhf], which is now required to
+ build the firefly-rk3288 target.
+ * Fix build of firefly-rk3288 target, which now uses u-boot-spl.bin to
+ generate rksd image.
+ * Build u-boot.img and u-boot.bin instead of deprecated u-boot-dtb.*
+ targets.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 01 Aug 2016 00:42:12 -0700
+
+u-boot (2016.07~rc3+dfsg1-2) experimental; urgency=medium
+
+ * [armel] Apply patch from upstream that fixes FTBFS on openrd variants.
+ (Closes: #830169).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 07 Jul 2016 11:17:30 +0200
+
+u-boot (2016.07~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+
+ [ Vagrant Cascadian ]
+ * u-boot-sunxi: Enable on arm64.
+ * u-boot-sunxi: Enable pine64_plus target on arm64.
+ * Remove reproducibility patches, applied upstream.
+
+ [ Ricardo Salveti ]
+ * [arm64] Add u-boot-qcom package and enable dragonboard410c target
+ (Closes: #824955).
+ * Add patch submitted upstream "dragonboard410c: adding missing default
+ addr for script and pxe boot."
+ * Add patch submitted upstream "dragonboard410c: prefer sdcard boot over
+ emmc"
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 05 Jul 2016 12:34:49 +0200
+
+u-boot (2016.07~rc1+dfsg1-3) experimental; urgency=medium
+
+ [ Martin Michlmayr ]
+ * Add NVIDIA to Tegra description
+ * u-boot-tegra.README.Debian: fix name of package
+ * u-boot-tegra.README.Debian: improve Jetson TK instructions.
+ (Closes: #827081).
+
+ [ Vagrant Cascadian ]
+ * debian/control: u-boot-tools is not needed when cross-building on
+ arm64.
+ * Add patch to respect SOURCE_DATE_EPOCH when building FIT images,
+ fixing reproducibility issues with dra7xx_evm target. Thanks to HW42
+ for the patch.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 16 Jun 2016 12:29:51 -0700
+
+u-boot (2016.07~rc1+dfsg1-2) experimental; urgency=medium
+
+ * u-boot-tegra: Only install p2371-2180 symlink on arm64.
+ (Closes: #826905). Thanks to Martin Michlmayr for the report!
+ * Add patch to fix reproducibility issues with ld and some
+ locales. Thanks to HW42!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 12 Jun 2016 06:15:22 -0700
+
+u-boot (2016.07~rc1+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+
+ [ Martin Michlmayr ]
+ * u-boot-tegra:
+ - Add Jetson TX1 (P2371-2180) target (Closes: #825458).
+ - Add arm64 arch.
+ - Update README.Debian for Jetson TX1.
+
+ [ Vagrant Cascadian ]
+ * u-boot-omap: Update use dra7xx_evm target.
+ * u-boot-imx: Remove patch to us private libgcc on imx systems.
+ * u-boot-exynos:
+ - Refresh odroid distro_bootcmd patch.
+ - Increase default environment size on odroid-u3 to support
+ distro_bootcmd.
+ * u-boot-sunxi: Enable Cubietruck_plus target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 07 Jun 2016 12:04:16 -0700
+
+u-boot (2016.05+dfsg1-1) experimental; urgency=medium
+
+ * New upstream version.
+
+ [ Ryan Finnie ]
+ * u-boot-rpi: Add rpi_3, rpi_3_32b target (Closes: #823524).
+ * u-boot-rpi: Add arm64 arch.
+
+ [ Vagrant Cascadian ]
+ * Remove patches applied upstream:
+ - Revert-ti_armv7_common.h-Fix-U-Boot-location-on-eMMC.patch
+ - Revert-rockchip-rk3288-correct-sdram-setting.patch
+ - odroid-Update-README-with-correct-firmware-link-and-.patch
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 17 May 2016 13:03:11 -0700
+
+u-boot (2016.05~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Update debian/patches for 2016.05-rc3.
+ * u-boot-rockchip:
+ - Revert upstream patch to fix detected ram size on Firefly boards.
+ * u-boot-imx:
+ - Add patch to fix FTBFS by using u-boot's private libgcc.
+ * u-boot-tools:
+ - Add fw_env.config for openrd (Closes: #821056).
+ Thanks to Rick Thomas.
+ * u-boot-omap:
+ - Revert upstream patch changing the default offsets for loading
+ u-boot from eMMC.
+ * u-boot-exynos:
+ - Add odroid-xu3 target, tested on Odroid-XU4.
+ - Add patch from upstream with updated documentation about Odroid-XU4
+ target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 30 Apr 2016 18:53:04 -0700
+
+u-boot (2016.03+dfsg1-6) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * u-boot-tegra: Only install p2371-2180 symlink on arm64.
+ (Closes: #826905). Thanks to Martin Michlmayr for the report!
+ * Add patch to fix reproducibility issues with ld and some
+ locales. Thanks to HW42!
+
+ [ Martin Michlmayr ]
+ * Add NVIDIA to Tegra description
+ * u-boot-tegra.README.Debian: fix name of package
+ * u-boot-tegra.README.Debian: improve Jetson TK instructions.
+ (Closes: #827081).
+
+ [ Vagrant Cascadian ]
+ * Apply patch from upstream to fix volatages used on several OlinuXino
+ Lime board variants (Closes: #825214). Thanks to Karsten Merker for
+ tracking down the patch!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 28 Jun 2016 09:38:27 +0200
+
+u-boot (2016.03+dfsg1-5) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * Add patches from upstream to detect fdtfile on am57xx, and update
+ distro_bootcmd patch accordingly.
+ * u-boot-tools: Add fw_env.config for openrd (Closes: #821056). Thanks
+ to Rick Thomas.
+ * u-boot-omap: Add support for dra74_evm (Closes: #824730). Thanks to
+ Ben Hutchings.
+ * Added odroid-xu3 target, tested on Odroid-XU4.
+
+ [ Gerald Kerma ]
+ * Correct the guruplug.config to match the new upstream env address.
+ (Closes: #781873).
+
+ [ Vagrant Cascadian ]
+ * u-boot-exynos: Add patch to support distro_bootcmd on odroid target.
+
+ [ Martin Michlmayr ]
+ * u-boot-tegra: Add Jetson TX1 (P2371-2180) target (Closes: #825458).
+ * u-boot-tegra: Add arm64 arch.
+ * u-boot-tegra: Update README.Debian for Jetson TX1.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 29 May 2016 14:29:59 -0700
+
+u-boot (2016.03+dfsg1-4) unstable; urgency=medium
+
+ * Add patch to fix detected ram size on Firefly boards by reverting
+ "rockchip: rk3288: correct sdram setting".
+ * debian/control: Updated Standards-Version to 3.9.8, no changes needed.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 16 Apr 2016 15:33:22 -0700
+
+u-boot (2016.03+dfsg1-3) unstable; urgency=medium
+
+ * u-boot-omap:
+ - Remove ti-u-boot patches, which are no longer needed.
+ - Update am57xx support for distro bootcmd.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 04 Apr 2016 11:23:06 -0700
+
+u-boot (2016.03+dfsg1-2) unstable; urgency=medium
+
+ * Apply patch from upstream to fix gmac ethernet on sunxi
+ systems. (Closes: #818621). Thanks to Karsten Merker for the report.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 28 Mar 2016 19:52:45 -0700
+
+u-boot (2016.03+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+ * Remove Firefly-RK3288 patch applied upstream.
+ * debian/control:
+ - Update to use https for Vcs-Git and Vcs-Browser.
+ - Update to Standards-Version 3.9.7, no changes needed.
+ * Update lintian overrides to ignore a company named Synopsys listed in
+ debian/copyright, which is flagged as a misspelling.
+ * Add patches to fix mispellings for "comment", "supported" and
+ "transferred".
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 15 Mar 2016 14:53:55 -0700
+
+u-boot (2016.03~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Add patch submitted upstream to fix Firefly-RK3288 SPL by disabling
+ eMMC feature in SPL.
+ * u-boot-sunxi: Drop FEL targets, as moderm versions of sunxi-tools
+ support loading u-boot-sunxi-with-spl.bin directly.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 08 Mar 2016 13:28:50 -0800
+
+u-boot (2016.03~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream.
+ * Refresh patches:
+ - Makefile-add-kwb-target-to-all.patch
+ - 0001-Makefile-Include-vendor-common-library-in-include-se.patch
+ - udoo_quad-support.patch
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 16 Feb 2016 15:01:48 -0800
+
+u-boot (2016.01+dfsg1-2) unstable; urgency=medium
+
+ * u-boot-omap:
+ - Include patches from ti-u-boot to support AM57xx boards.
+ - Add patch for AM57xx boards to boot using distro bootcmd.
+ - Add am57xx_evm target, used by the BeagleBoard-X15.
+ * Apply patches from upstream to fix OpenRD builds with
+ GCC-5. Thanks to Albert ARIBAUD. (Closes: #811129)
+ * u-boot-imx: Apply patch "wandboard: fix variable name so PXE boot
+ works" from upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 08 Feb 2016 20:14:04 -0800
+
+u-boot (2016.01+dfsg1-1) unstable; urgency=medium
+
+ * u-boot-sunxi: Enable orangepi_plus target.
+ * Remove patch Switching novena to config_distro_bootcmd, applied
+ upstream.
+ * armel: Enable openrd_base, openrd_client and openrd_ultimate
+ targets. Thanks to Albert ARIBAUD, Rick Thomas and Philip Hands for
+ testing. (Closes: #810790)
+ * Add Rick Thomas as a sheevaplug tester.
+ * sheevaplug: Update env documentation to default to current u-boot
+ offsets. (Closes: #781874)
+ * Bump versioned dependencies on debhelper and dpkg-dev to support use
+ of build profiles.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 12 Jan 2016 11:48:34 -0800
+
+u-boot (2016.01~rc3+dfsg1-3) experimental; urgency=medium
+
+ * u-boot-rockchip: Generate rksd images.
+ * u-boot-rockchip: Build u-boot-dtb.img instead of u-boot.img.
+ * Add u-boot-rpi package for Raspberry pi systems:
+ - [armel] Include rpi target.
+ - [armhf] Add rpi_2 target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 02 Jan 2016 15:19:11 -0800
+
+u-boot (2016.01~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ - Fixes eMMC boot selection on BeagleBone Black.
+ * Add patch to fix missing bootdelay on am335x.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 22 Dec 2015 18:20:52 -0800
+
+u-boot (2016.01~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate:
+ - Remove patches applied upstream.
+ - Refresh patches:
+ + arndale/board-spl-rule.diff
+ + beagleboneblack/usb-mass-storage.patch
+ + 0001-arm-novena-Switch-novena-to-config_distro_bootcmd.patch
+
+ * u-boot-tools:
+ - Install man page for kwboot.
+ - Add dumpimage command (Closes: #807174).
+ - strip mkenvimage.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 12 Dec 2015 19:00:32 -0800
+
+u-boot (2015.10+dfsg1-4) unstable; urgency=medium
+
+ * Fix reproducibility issue with targets listed in package descriptions
+ by always sorting using C locale.
+ * u-boot-imx: Updates to novena patches:
+ - Sync with submitted patch for distro_bootcmd support.
+ - Add upstream patch to fix USB support.
+ - Add upstream patch to enable loading u-boot.img from EXT
+ filesystems.
+ * Add upstream patches to fix mkimage support for multi and script
+ images (Closes: #805434).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 08 Dec 2015 08:59:47 -0800
+
+u-boot (2015.10+dfsg1-3) unstable; urgency=medium
+
+ * u-boot-install-targets: Add support to install documentation.
+ * u-boot-exynos: Install README.odroid.
+ * u-boot-rockchip: Install README.rockchip.
+ * u-boot-omap: Install README.nokia_rx51.
+ * Add included platforms to u-boot package descriptions.
+ * u-boot-sunxi: Enable the A10s-OLinuXino-M target. Thanks to Benedikt
+ Wildenhain (Closes: #806151).
+ * u-boot-imx: Add novena patches to include fdtfile variable, and load
+ fdt file into correct address.
+ * u-boot-sunxi: Backport patches from upstream to enable the Lamobo_R1
+ target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 24 Nov 2015 14:14:29 -0800
+
+u-boot (2015.10+dfsg1-2) unstable; urgency=medium
+
+ * Add missing content to u-boot-rockchip package.
+ * Update wandboard and mx6cuboxi patches to use config_distro_bootcmd
+ patches from u-boot-imx.
+ * Patch mx6cuboxi to specify the baudrate in the console setting.
+ * Update BeagleBone Black patches to use config_distro_bootcmd from
+ upstream.
+ * Patch to switch novena to use distro_bootcmd.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 14 Nov 2015 09:22:47 -0600
+
+u-boot (2015.10+dfsg1-2~exp1) experimental; urgency=medium
+
+ * Build rockchip package, with firefly-rk3288 as the initial
+ target. Thanks to Emilio Pozuelo Monfort and Sjoerd Simons.
+ (Closes: #803166).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 02 Nov 2015 07:59:36 -0800
+
+u-boot (2015.10+dfsg1-1) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * New upstream version.
+ * Remove patch to fix variation caused by timezone differences, applied
+ upstream.
+ * Add patch to use a relative path to include the sunxi spl header,
+ which allows mksunxiboot to build on any architecture. Thanks to Ian
+ Campbell for the initial patch!
+ * Add patch from upstream to fix non-Android booting with ramdisk and/or
+ device tree.
+
+ [ Karsten Merker ]
+ * u-boot-sunxi: Enable the A20-Olimex-SOM-EVB target (Closes: #803335).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 29 Oct 2015 13:35:23 -0700
+
+u-boot (2015.10~rc4+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release candidate.
+ * Updated udoo patches and debian/targets, upstream switched to a single
+ target that supports both udoo quad and dual.
+ * u-boot-sunxi: Add Linksprite_pcDuino target (Closes: #799035). Thanks
+ to Robert Hegner for testing!
+ * Refreshed patches for beaglebone black.
+ * Add patch to fix build variation based on timezone, by removing call
+ to "mktime".
+ * debian/copyright: Updated new locations for exynos files.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 30 Sep 2015 12:00:30 -0700
+
+u-boot (2015.10~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Install mkenvimage. Patch from Ubuntu.
+ * Refreshed patches for arndale, beaglebone black, and mx53loco.
+ * Remove reproducibility patch, applied upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 01 Sep 2015 17:10:40 -0500
+
+u-boot (2015.07+dfsg1-1) unstable; urgency=medium
+
+ [ Jochen Sprickerhof ]
+ * u-boot-sunxi: enable Mini-X target (Closes: #787266).
+
+ [ Ian Campbell ]
+ * Add support for Tegra Jetson TK-1 (Closes: #788689)
+
+ [ Vagrant Cascadian ]
+ New upstream version:
+ * mx6cuboxi:
+ - Remove patches applied upstream.
+ - Refresh distro bootcmd patch.
+ * wandboard:
+ - Remove wandboard SPL patch, applied upstream.
+ - Refresh distro bootcmd patch.
+ * beagleboneblack:
+ - Refresh distro bootcmd patch.
+ * udoo_quad:
+ - Refresh support patch.
+ * Drop no-error-on-set-but-unused-variable patch, no longer relevent.
+ * Add patch to ensure that CONFIG_SANDBOX is set when running "make env".
+
+ * Use patch applied upstream to use SOURCE_DATE_EPOCH when set.
+ * debian/rules: Use the Date from debian/changelog to set
+ SOURCE_DATE_EPOCH.
+
+ * Add example fw_env.config for mx6cuboxi (Closes: #786877).
+ * Add example fw_env.config for wandboard.
+
+ * Add Build-Depends on dpkg-dev (>= 1.17.0), as debian/rules uses
+ "dpkg-parsechangelog --show-field" introduced in that
+ version. (Closes: #768099).
+
+ * debian/watch: Update to use ftp server.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 01 Aug 2015 07:29:07 -0700
+
+u-boot (2015.04+dfsg1-2) unstable; urgency=medium
+
+ [ Joost van Zwieten ]
+ * u-boot-exynos: Enable odroid target.
+
+ [ Vagrant Cascadian ]
+ * u-boot-imx/mx6cuboxi:
+ + Add patches to enable HDMI and USB support.
+ + Add patches to fix Ethernet PHY detection.
+ * u-boot-imx/wandboard: Add patch from u-boot-imx to build a single SPL
+ target for all variants.
+
+ [ Robert Nelson ]
+ * u-boot-omap: Include u-boot.img instead of u-boot.bin for igep0020,
+ omap3_beagle and omap4_panda.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 25 May 2015 20:36:37 -0700
+
+u-boot (2015.04+dfsg1-1) experimental; urgency=medium
+
+ [ Ian Campbell ]
+ * u-boot-exynos: Fix conflict between arndale and sunxi spl
+ targets.
+ * u-boot-sunxi: Update sunxi FEL target.
+
+ [ Vagrant Cascadian ]
+ * u-boot-imx:
+ + Add usbarmory target.
+ + Add novena target.
+ + Add patches from u-boot-imx to support Cubox-i and Hummingboard and
+ drop old cubox-i patches.
+ + Add mx6cuboxi target.
+ + mx6cuboxi: Add patch to use config_distro_bootcmd.
+ + wandboard: Add patch to use config_distro_bootcmd and remove old
+ environment patches.
+
+ * u-boot-omap:
+ + am335x_boneblack: Remove patch to set voltage.
+ + am335x_boneblack: Add patch to use config_distro_bootcmd and remove
+ old patches.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 27 Apr 2015 14:54:44 -0700
+
+u-boot (2015.04~rc5+dfsg1-1) experimental; urgency=medium
+
+ [ John Paul Adrian Glaubitz ]
+ * [sh4] Fix FTBFS due to incorrect target names (Closes: #780066).
+
+ [ Vagrant Cascadian ]
+ * [armel] Use "rpi" for the Raspberry pi target, as it was renamed
+ upstream.
+ * [armel] Remove openrd_ultimate target, which fails to build upstream.
+ * [armel] Remove obsolete mmc guruplug and openrd patches.
+ * [armhf] Remove arndale patches, applied upstream.
+ * Fix cross-building of u-boot-tools (Closes: #775614).
+ * [armhf] u-boot-sunxi: Enable A20-OLinuXino_MICRO. Thanks to Arne
+ Ploese for testing!
+ * [armhf] u-boot-sunxi: Enable Linksprite_pcDuino3. Thanks to Patrice Go
+ for testing!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 07 Apr 2015 13:58:39 -0700
+
+u-boot (2015.04~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream:
+ - ti_armv7_common-support_raw_initrd.diff
+ * Refresh patches:
+ - cubox-i/cubox-i-support.diff
+ - mipsel-native-endianness.diff
+ - mx53loco
+ - openrd-mmc.diff
+ - series
+ - wandboard/wandboard-uEnv.txt-bootz-n-fixes.patch
+ - guruplug_mvfs_and_mmc.diff
+ * Add patch to enable USB mass-storage support for the BeagleBone Black:
+ - beagleboneblack/usb-mass-storage.patch
+ * debian/rules: Add get-orig-source target.
+
+ * Disable patches that fail to apply:
+ - cubox-i/imx6-spl-support.diff
+ - arndale/exynos-Enable-config_distro_defaults.h.patch
+ - arndale/exynos5-Use-config_distro_bootcmd.h.patch
+ * Disable cubox-i build target and patches, as it fails to build.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 08 Mar 2015 12:15:59 -0700
+
+u-boot (2014.10+dfsg1-5) unstable; urgency=medium
+
+ [ John Paul Adrian Glaubitz ]
+ * [sh4] Fix FTBFS due to incorrect target names (Closes: #780066).
+
+ [ Vagrant Cascadian ]
+ * [armhf] u-boot-sunxi: Enable A20-OLinuXino_MICRO. Thanks to Arne
+ Ploese for testing!
+ * [armhf] u-boot-sunxi: Enable Linksprite_pcDuino3. Thanks to Patrice Go
+ for testing!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 07 Apr 2015 13:42:30 -0700
+
+u-boot (2014.10+dfsg1-4) unstable; urgency=medium
+
+ [ Karsten Merker ]
+ * Backport support for the LeMaker Banana Pro board (Closes: #779908).
+
+ [ Vagrant Cascadian ]
+ * Update lintian rules for BananaPro and A20-OlinuXino-LIME2.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 08 Mar 2015 11:13:07 -0700
+
+u-boot (2014.10+dfsg1-3) unstable; urgency=medium
+
+ * cubox-i-support.diff: Refresh patch, dropping solidrun.bmp, which
+ causes FTBFS with newer version of patch (Closes: #777518).
+
+ * Add patch to support A20-OLinuXino-LIME2, backported from u-boot
+ 2015.01. Thanks to Karsten Merker for the patch (Closes: #777466).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 21 Feb 2015 13:13:31 -0800
+
+u-boot (2014.10+dfsg1-2.1) unstable; urgency=medium
+
+ * Non-maintainer upload.
+ * debian/patches:
+ - Add sh4-fix-linker-name-prefix.patch to use the proper
+ linker name prefix on sh4. Fixes FTBFS. (Closes: #771747)
+
+ -- John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Thu, 11 Dec 2014 00:00:08 +0100
+
+u-boot (2014.10+dfsg1-2) unstable; urgency=medium
+
+ [ Steve Langasek ]
+ * Resync cubox-i patches with github.
+ - fixes support for booting on the cubox-i2ultra/i2ex.
+ (Closes: #766266)
+
+ [ Vagrant Cascadian ]
+ * wandboard, cubox-i: Add patches to use variables expected by
+ debian-installer bootscript.
+ * cubox-i: Move importing bootenv before loading the boot script, to
+ allow environment variables useful to the boot script to be set.
+ * cubox-i: Run autodetectfdt before attempting to load the boot script.
+ * Split README.Debian by subarchitecture, and document installing u-boot
+ on several additional boards.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 01 Nov 2014 16:33:33 -0700
+
+u-boot (2014.10+dfsg1-1) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * New upstream release.
+ * Refresh cubox-i patches to 2014.10.
+ * Update cubox-i patches to use generic board.
+ * Remove debian/patches/kerma-sheevaplug-mvsata.diff, merged upstream.
+ * Patch to allow tools-only to build without a configuration.
+ * Update Standards-Version to 3.9.6, no changes needed.
+
+ [ Ian Campbell ]
+ * Rebase arndale patches onto 2014.10
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 19 Oct 2014 11:34:39 -0700
+
+u-boot (2014.10~rc3+dfsg1-2) experimental; urgency=medium
+
+ [ Ian Campbell ]
+ * Add support for the Arndale board (Closes: #763186).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 09 Oct 2014 11:41:31 -0700
+
+u-boot (2014.10~rc3+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream:
+ - bootcmd-scsi-scan-before-scsi.patch
+ - sunxi/0001-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch
+ * Refresh patches:
+ - am335x-bootscript.diff
+ - am335x-uenv.txt.diff
+ - cubox-i/cubox-i-support.diff
+ - no-force-CROSS_COMPILE-powerpc.diff
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 08 Oct 2014 09:57:35 -0700
+
+u-boot (2014.10~rc2+dfsg1-2) unstable; urgency=medium
+
+ [ Héctor Orón Martínez ]
+ * Fix cross building.
+ * Build extra tools for kirkwood and sunxi (Closes: #750108).
+ * Build extra tools and env just once, and install in PATH again.
+ * Add nitrogen6q support to u-boot-imx.
+
+ [ Vagrant Cascadian ]
+ * Use "make all" instead of making individual targets, recording a list
+ of targets to install in each subarch package.
+ * Build FEL variants for all sunxi platforms, based on patches from Ian
+ Campbell.
+ * Add build-depends on "bc".
+ * Patch to add the debian revision to the U-boot version.
+ * Updated cubox-i patches and re-enable mx6_cubox-i target.
+ * Build tools and env with NO_SDL=1 to avoid complaining about missing
+ sdl-config.
+ * Remove mips target dbau1100, an old platform with no testers.
+ * Swich qemu_mips target to install u-boot.bin, which is what is
+ actually needed by qemu.
+ * Add patch to Set DCDC1 DDR3 to 1.35V for Beaglebone Black. Thanks to
+ Robert Nelson for the patch.
+
+ [ Ian Campbell ]
+ * Add patch to add u-boot.kwb to "make all" on Kirkwood platforms.
+ * Build tools out-of-tree too so as not to dirty the source used for the
+ actual platforms (Closes: #763024).
+ * Add patch to initialize scsi before trying scsi disks in
+ config_distro_bootcmd (Closes: #764069).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 06 Oct 2014 16:58:04 -0700
+
+u-boot (2014.10~rc2+dfsg1-2~exp1) experimental; urgency=medium
+
+ * Split u-boot package into u-boot-imx, u-boot-omap and u-boot-sunxi
+ packages on armhf.
+
+ * debian/targets:
+ - Enable A10-OLinuXino-Lime target.
+ - Enable Cubieboard2 and Cubieboard2_FEL targets (Closes: #762383).
+ - Enable A20-OLinuXino-LIME target.
+ - Disable mx6_cubox-i
+ - Disable efikamx and efikasb.
+
+ * debian/patches:
+ - Add patch from upstream to support A20-OLinuXino-LIME.
+ - Disable patches for cubox-i.
+
+ * debian/rules:
+ - Remove excess conditional architecture check, drop build-dep on
+ dctrl-tools.
+ - Remove executable bit from u-boot targets.
+
+ * Updated lintian overrides.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 22 Sep 2014 18:30:12 -0500
+
+u-boot (2014.10~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+
+ * Update debian/patches:
+ - Remove Cubieboard and Cubietruck patches, applied upstream.
+ - Remove kerma-sheevaplug-mvsdio patch, applied upstream.
+ - Update openrd-mmc patch, partially applied upstream.
+ - Add patch to workaround failure when building env tools.
+
+ * [armhf] Add Bananapi target.
+
+ * debian/rules:
+ - Install fw_printenv and fw_setenv symlink in platform-specific dir.
+ - Create include/config/auto.conf to allow tools-only target to build.
+ - Update to use defconfig target rather than config target.
+
+ * debian/copyright:
+ - Update Files-Excluded as some files were removed upstream.
+
+ * Updated lintian overrides.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 03 Sep 2014 23:28:59 -0700
+
+u-boot (2014.07+dfsg1-2) unstable; urgency=medium
+
+ [ Steve Langasek ]
+ * Rebase cubox-i patches on 2014.07 and re-enable the target.
+
+ [ Vagrant Cascadian ]
+ * Switch to debhelper 9 with executable .install files.
+ * Remove the efikamx and efikasb targets.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 14 Sep 2014 23:01:50 -0500
+
+u-boot (2014.07+dfsg1-1) unstable; urgency=medium
+
+ * New upstream version.
+ * [armhf] Temporarily disable cubox-i target, which needs re-working for
+ new upstream version.
+ * Refresh Cubietruck and Cubieboard patches.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 28 Aug 2014 12:22:06 -0700
+
+u-boot (2014.07~rc4+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Updated patches for sheevaplug MMC and SATA support.
+ * Updated openrd patches to use MMC driver.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 12 Jul 2014 17:24:51 -0700
+
+u-boot (2014.04+dfsg1-3) unstable; urgency=medium
+
+ * Add patch for mx53loco that enables support for ext4, the "load" command,
+ and using bootz with raw initrds.
+ * Remove ZUMA platform and drop powerpc from u-boot architectures
+ (Closes: #754610).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 28 Jul 2014 15:30:26 -0700
+
+u-boot (2014.04+dfsg1-2) unstable; urgency=medium
+
+ * Enable udoo_quad target, with patch improving the udoo_quad boot
+ environment. Thanks to Michael Fladischer! (Closes: #753376).
+ * Enable Cubieboard target and patches.
+ * Update lintian overrides.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 09 Jul 2014 12:37:12 -0700
+
+u-boot (2014.04+dfsg1-1) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * Repack upstream tarball to remove files containing firmware without
+ sources (Closes: #750912).
+
+ * Add patches for Cubietruck from upstream.
+ * Add Cubietruck and Cubietruck_FEL targets (Closes: #750473).
+
+ * Add support for bootscripts to BeagleBone Black.
+ - Support loading files from either first or second partition.
+
+ * Modified wandboard patches:
+ - Add support for bootscripts.
+ - Support both fat and ext filesystems by consistantly using the "load"
+ command.
+ - Try loading bootscript from /boot/ as a fallback if not found in /.
+
+ * Update debian/copyright to use copyright format 1.0.
+ - Document which files are removed in debian/copyright.
+ * Update debian/watch to handle +dfsg version.
+ * Update lintian overrides:
+ - Ignore 'u-boot: statically-linked-binary'.
+ - Include new u-boot targets.
+
+ [ Andreas Henriksson ]
+ * Add patches for sunxi AHCI driver (Cubietruck) (Closes: #750473).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 15 Jun 2014 21:03:40 -0700
+
+u-boot (2014.04-2) unstable; urgency=medium
+
+ * Fix FTBFS on powerpc by not setting CROSS_COMPILE when empty.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 26 May 2014 11:32:49 -0700
+
+u-boot (2014.04-1) unstable; urgency=low
+
+ [ Steve Langasek ]
+ * Patches taken from https://github.com/rabeeh/u-boot-imx6.git to support
+ the SolidRun CuBox-i series:
+ - debian/patches/spl-sata-support.diff:
+ Add support for SATA in SPL mode
+ - debian/patches/imx6-spl-support.diff:
+ Add support for SPL on i.MX6-based systems
+ - debian/patches/cubox-support.diff, tools/logos/solidrun.bmp:
+ Add support for the CuBox-i.
+ * Build the mx6_cubox-i target (Closes: #741127).
+
+ [ Vagrant Cascadian ]
+ * Add Nokia nokia_rx51 (n900) to targets to build.
+ - Patch n900 build to support bootz and raw initrds.
+ * debian/rules: Fix building of targets for v2014.04.
+ - Move fw_printenv creation into board-specific targets.
+ - Build target "tools-only".
+ - Drop special-casing of MLO, add MLO to debian/targets.
+ * debian/patches/cubox-i-raw-initrd.diff:
+ - Patch to support raw initrd on cubox-i.
+ * debian/watch: Use http.
+ * debian/control: Bump Standards-Version to 3.9.5, no changes needed.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 20 May 2014 10:04:56 -0700
+
+u-boot (2014.01-2) unstable; urgency=medium
+
+ * Set Maintainer to Vagrant Cascadian (Closes: #738446).
+ * Remove Micah Anderson from uploaders.
+ * Add Clint Adams <clint@debian.org> to uploaders.
+ * Use grep-dctrl to pull architecture list from debian/control, rather than
+ hardcoding architectures in debian/rules.
+ * u-boot-tools: Set architecture to linux-any (Closes: #730833).
+ * Build raspberry pi (rpi_b) image on armel.
+ - Patch to to enable EXT2/EXT4 support and raw initrds.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 04 Mar 2014 14:13:22 -0800
+
+u-boot (2014.01-1) unstable; urgency=low
+
+ * New upstream version.
+ * Updated patches.
+ * debian/watch: Update to catch -rc versions.
+ * debian/control: Update Vcs-* headers.
+ * u-boot-tools: Strip comment sections from mkimage and fw_printenv.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 11 Feb 2014 15:11:47 -0800
+
+u-boot (2013.10-3) unstable; urgency=low
+
+ * Move build of dbau1100 from mipsel to mips, which fixes FTBFS on mipsel,
+ due to dbau1100 being big-endian.
+ * Disable mipsel builds of u-boot, as it no longer has any targets.
+ * Add patch to specify default mmc partition to use when loading uEnv.txt
+ on BeagleBone Black.
+ * Add patch to support raw initrds on BeagleBone Black.
+ * Mark u-boot-tools as Multi-Arch: foreign.
+ * Mark u-boot as Multi-Arch: same.
+ * Update lintian overrides with list of current platforms.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 17 Nov 2013 00:09:32 -0800
+
+u-boot (2013.10-2) unstable; urgency=low
+
+ * debian/rules:
+ - Switch back to explicitly building the specified target.
+ - Allow building multiple targets per platform.
+ * debian/targets:
+ - Build the spl/u-boot-spl.bin target on several armhf platforms, which
+ generates the MLO file.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 21 Oct 2013 11:33:01 -0700
+
+u-boot (2013.10-1) unstable; urgency=low
+
+ * New upstream version (Closes: #667680, #726699).
+ - Update mipsel-native-endianness.diff
+ * debian/rules:
+ - Remove various tools/* files on clean target.
+ - Build each platform target and install MLO file if present.
+ (Closes: #687562).
+ - Support parallel builds using DEB_BUILD_OPTIONS=parallel=N.
+ * Enable BeagleBone Black and Wandboard platforms.
+ * Add patch to support uEnv.txt and directly loading zimage for Wandboard.
+ * Include env configs u-boot-tools examples (Closes: #631659, #636214).
+ * Only build u-boot on architectures which generate images (Closes: #635050).
+ * Drop i386 builds of u-boot, as the only target (eNET) was removed upstream.
+ * debian/control: Add myself to uploaders.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 20 Oct 2013 10:23:55 -0700
+
+u-boot (2013.01.01-4) unstable; urgency=low
+
+ * Upload to unstable.
+ * Drop transitional packages uboot-envtools and uboot-mkimage.
+
+ -- Clint Adams <clint@debian.org> Thu, 09 May 2013 21:41:25 -0400
+
+u-boot (2013.01.01-3) experimental; urgency=low
+
+ * Disable unnecessary JFFS2 on GuruPlug
+ * Disable MMC on GuruPlug, devices are not detected,
+ they show up as USB devices instead
+
+ -- Micah Anderson <micah@debian.org> Mon, 25 Mar 2013 22:56:32 -0400
+
+u-boot (2013.01.01-2) experimental; urgency=low
+
+ * More properly enable MMC on GuruPlug.
+ * Use new Efika target names.
+ * Bump to Standards-Version 3.9.4.
+
+ -- Clint Adams <clint@debian.org> Sun, 24 Mar 2013 21:59:03 -0400
+
+u-boot (2013.01.01-1) experimental; urgency=low
+
+ * New upstream version. closes: #699232.
+ - Drop strip-env-tools.diff (merged).
+ - Update kerma-sheevaplug-mvsdio.diff.
+ - Update mipsel-native-endianness.diff
+ * Enable CONFIG_SYS_MVFS and CONFIG_CMD_MMC for GuruPlug.
+
+ -- Clint Adams <clint@debian.org> Thu, 21 Mar 2013 14:21:33 -0400
+
+u-boot (2012.04.01-2) unstable; urgency=low
+
+ * Remove code duplication in kerma-sheevaplug-mvsdio.diff.
+ closes: #674230.
+
+ -- Clint Adams <clint@debian.org> Thu, 31 May 2012 21:04:49 -0400
+
+u-boot (2012.04.01-1) unstable; urgency=low
+
+ * New upstream version.
+ - Update mipsel-native-endianness.diff.
+ - Update no-error-on-set-but-unused-variables.diff (partially merged).
+ - Drop kirkwood_spi-irq_mask.diff (merged).
+ - Drop kirkwood-disable-l2c.diff (merged).
+
+ -- Clint Adams <clint@debian.org> Tue, 01 May 2012 18:07:19 -0400
+
+u-boot (2011.12-3) unstable; urgency=low
+
+ [ Jonathan Nieder ]
+ * kirkwood: disable L2 cache before Linux boot; thanks to Ian Campbell.
+ closes: #658904
+
+ [ Loïc Minier ]
+ * Add patch to strip env tools; sent to upstream mailing-list.
+
+ -- Loïc Minier <lool@debian.org> Sun, 11 Mar 2012 16:12:50 +0100
+
+u-boot (2011.12-2) unstable; urgency=low
+
+ [ Loïc Minier ]
+ * Build u-boot.imx for efikasb on armhf
+
+ [ Clint Adams ]
+ * Patch from Ian Campbell to fix Dreamplug breakage. closes: #655102.
+
+ -- Clint Adams <clint@debian.org> Sun, 08 Jan 2012 15:11:03 -0500
+
+u-boot (2011.12-1) unstable; urgency=low
+
+ * New upstream version.
+ - Drop build-timestamp_autogenerated.h-without-config.patch (merged).
+ - Drop ublimage-NAND-block-size-isn-t-set-at-build-time.patch (merged).
+ - Update kerma-sheevaplug-mvsdio.diff
+ - Update mipsel-native-endianness.diff
+ - Drop dreamplug-v8.patch (merged).
+
+ -- Clint Adams <clint@debian.org> Mon, 02 Jan 2012 17:49:39 -0500
+
+u-boot (2011.09-2) unstable; urgency=low
+
+ * Patch from Pino Toscano <pino@debian.org> to build on the Hurd.
+ closes: #648295.
+ * Drop gr_xc3s_1500 target.
+ * Add build-arch and build-indep targets to debian/rules.
+
+ -- Clint Adams <clint@debian.org> Tue, 15 Nov 2011 23:53:01 -0500
+
+u-boot (2011.09-1) unstable; urgency=low
+
+ [ Hector Oron ]
+ * Enable MX53LOCO platform.
+ * Update lintian overrides.
+
+ [ Loïc Minier ]
+ * Fix FTBFS on amd64 and allow `make tools` to succeed without
+ config.
+
+ [ Clint Adams ]
+ * New upstream version.
+ - Update kerma-sheevaplug-mvsdio.diff.
+ - Drop panda-default-console.diff (refactored).
+ - Replace dreamplug patches with Jason's v8.
+ * Add Buffalo Linkstation Mini env config from Benjamin Cama.
+
+ -- Clint Adams <clint@debian.org> Fri, 30 Sep 2011 21:22:23 -0400
+
+u-boot (2011.06-4) unstable; urgency=low
+
+ * Increase the USB non-bulk timeout by an order of magnitude.
+ May fix #635774.
+
+ -- Clint Adams <clint@debian.org> Sat, 06 Aug 2011 13:42:52 -0400
+
+u-boot (2011.06-3) unstable; urgency=low
+
+ * Add DreamPlug support.
+
+ -- Clint Adams <clint@debian.org> Sun, 24 Jul 2011 09:35:32 -0400
+
+u-boot (2011.06-2) unstable; urgency=low
+
+ * Use -Wno-error=unused-but-set-variable on i386.
+
+ -- Clint Adams <clint@debian.org> Sat, 02 Jul 2011 22:14:44 -0400
+
+u-boot (2011.06-1) unstable; urgency=low
+
+ * New upstream version.
+ * Fix i386 and mipsel builds.
+
+ -- Clint Adams <clint@debian.org> Sat, 02 Jul 2011 19:25:28 -0400
+
+u-boot (2011.06~rc3-1) unstable; urgency=low
+
+ * New upstream version.
+
+ -- Clint Adams <clint@debian.org> Sat, 02 Jul 2011 15:50:46 -0400
+
+u-boot (2011.06~rc2-2) unstable; urgency=low
+
+ * Fix mipsel endianness problem again.
+ * Try building gr_xc3s_1500 on sparc.
+
+ -- Clint Adams <clint@debian.org> Sat, 18 Jun 2011 10:13:53 -0400
+
+u-boot (2011.06~rc2-1) unstable; urgency=low
+
+ * New upstream version.
+ * Fix tools config selection.
+
+ -- Clint Adams <clint@debian.org> Tue, 14 Jun 2011 20:53:07 -0400
+
+u-boot (2011.06~rc1-1) unstable; urgency=low
+
+ * New upstream version.
+ - Update mipsel-native-endianness.diff
+ - Drop Drop-config.h-include-in-tools-imximage.h.diff (merged).
+ - Drop openrd-client-and-ultimate.diff (merged).
+ - Update openrd-mmc.diff (formerly openrd-mmc-mtd-fat.diff).
+ - Drop eNET-monitor_flash_len.diff (merged).
+ - Update snapshot.commit to 2011.06-rc1.
+ - Use the first target for each arch to build the tools, or
+ fake it on the other architectures.
+ * Only build efikamx image on armhf.
+
+ -- Clint Adams <clint@debian.org> Sat, 21 May 2011 11:04:30 -0400
+
+u-boot (2011.03-6) unstable; urgency=low
+
+ * Bump to Standards-Version 3.9.2.
+ * Tweak the u-boot-tools description.
+ * Drop igep0020, omap3_beagle, and omap4_panda targets from
+ armel; they are available on armhf.
+
+ -- Clint Adams <clint@debian.org> Tue, 26 Apr 2011 16:11:24 -0400
+
+u-boot (2011.03-5) unstable; urgency=low
+
+ [ Sebastian Reichel ]
+ * Add Pandaboard target. closes: #624123
+ * New patch to change default console on Pandaboard.
+
+ -- Clint Adams <clint@debian.org> Mon, 25 Apr 2011 15:36:16 -0400
+
+u-boot (2011.03-4) unstable; urgency=low
+
+ * Enable FAT, SD/MMC, MTD, JFFS, UBIFS support on OpenRD boards.
+
+ -- Clint Adams <clint@debian.org> Wed, 13 Apr 2011 18:05:36 -0400
+
+u-boot (2011.03-3) unstable; urgency=low
+
+ * Actually pass the right arch_number for OpenRD-Ultimate.
+
+ -- Clint Adams <clint@debian.org> Tue, 12 Apr 2011 14:28:20 -0400
+
+u-boot (2011.03-2) unstable; urgency=low
+
+ * Fix i386 FTBFS with eNET-monitor_flash_len.diff
+ * Add patch for OpenRD-Client and OpenRD-Ultimate.
+ * Drop openrd_base target and add openrd_ultimate target.
+
+ -- Clint Adams <clint@debian.org> Tue, 05 Apr 2011 15:56:43 -0400
+
+u-boot (2011.03-1) unstable; urgency=low
+
+ [ Loïc Minier ]
+ * Only try to build env tools when Linux MTD headers are present.
+ closes: #619673.
+
+ [ Clint Adams ]
+ * New upstream version.
+ - Drop fix-definition-of-global_data-struct.diff (now upstream).
+ - Drop EfikaMX-switch-to-MACH_TYPE_MX51_EFIKAMX.diff (upstream now).
+ - Drop sh-sh7785lcr-Fix-out-of-tree-building.diff (upstream now).
+ - Drop MIPS-dbau1x00-Remove-unused-flash-driver-stub.diff (upstream now).
+ - Drop x86-Align-config.mk-and-linker-scripts-with-other-ar.diff
+ (upstream now).
+ - Update snapshot.commit to 2011.03
+
+ -- Clint Adams <clint@debian.org> Fri, 01 Apr 2011 10:30:46 -0400
+
+u-boot (2011.03~rc1-4) experimental; urgency=low
+
+ * Add patch x86-Align-config.mk-and-linker-scripts-with-other-ar.
+ From upstream mailing-list; fixes x86 build (eNET).
+
+ -- Loïc Minier <lool@debian.org> Wed, 09 Feb 2011 14:51:01 +0100
+
+u-boot (2011.03~rc1-3) experimental; urgency=low
+
+ * Add debian/source/local-options
+ - unapply-patches: avoids committing patched tree after a build
+ - abort-on-upstream-changes: avoids creating a debian-changes-* patch
+ when building from a dirty tree
+ * Add patch MIPS-dbau1x00-Remove-unused-flash-driver-stub,
+ from u-boot-mipsel.git 17a990b55008fd79636e4880d9d10b7172ca87ce and also
+ sent to the upstream mailing-list; fixes build of dbau1x00 board by
+ removing board/dbau1x00/flash.c entirely, and hence fixes the build of
+ u-boot on mipsel.
+
+ -- Loïc Minier <lool@debian.org> Tue, 08 Feb 2011 16:49:05 +0100
+
+u-boot (2011.03~rc1-2) experimental; urgency=low
+
+ * New patch sh-sh7785lcr-Fix-out-of-tree-building; from upstream
+ e72f46787f44c1104a8df18511ab230b6072a1f0; fixes Debian sh4 build; thanks
+ Nobuhiro Iwamatsu; closes: #611873.
+
+ -- Loïc Minier <lool@debian.org> Mon, 07 Feb 2011 17:20:16 +0100
+
+u-boot (2011.03~rc1-1) experimental; urgency=low
+
+ * dpkg-shlibdeps usr/bin/* rather than just mkimage.
+ * uboot-mkimage's Section is utils.
+ * Allow overriding CROSS_COMPILE.
+ * New upstream release candidate.
+ - Merge commit v2011.03-rc1
+ - Update snapshot.commit to 2011.03-rc1
+ * Add EfikaMX support.
+ - Add patch EfikaMX-switch-to-MACH_TYPE_MX51_EFIKAMX from the upstream
+ mailing-list; fixes build on EfikaMX (EfikaMX: switch to
+ MACH_TYPE_MX51_EFIKAMX)
+ - Add patch Drop-config.h-include-in-tools-imximage.h from the upstream
+ mailing-list; fixes tools-all build of imximage.c.
+ - Build u-boot.imx for efikamx on armel.
+ * Refresh patch kerma-sheevaplug-mvsdio to fix fuzz.
+
+ -- Loïc Minier <lool@debian.org> Thu, 03 Feb 2011 13:13:14 +0100
+
+u-boot (2010.12-2) unstable; urgency=low
+
+ * Avoid calling dpkg-architecture if DEB_HOST_ARCH is set.
+ * Misc refactoring of debian/rules.
+ - Split per architecture list of platform and targets into
+ debian/targets.
+ - Actually use INSTALL_FILE/INSTALL_DIR/INSTALL_PROGRAM.
+ - Add support for cross-builds; these will currently lack tools.
+ - Build board-specific u-boot files in a separate build dir from the
+ generic tools
+ * Fix handling of -Wl,foo LDFLAGS; the upstream build passes LDFLAGS
+ directly to ld instead of calling gcc for linking; so instead of passing
+ -Wl,foo in LDFLAGS as in automake builds, one should set LDFLAGS to foo
+ directly; add a snippet to strip -Wl, from LDFLAGS; alternatively, we
+ could do as in other special packages like the kernel and simply unset
+ LDFLAGS entirely; closes: #607613.
+ * Install and compress upstream mkimage manpage; based on a patch by
+ Marcin Juszkiewicz.
+ * Add a dummy uboot-mkimage package for upgrades from squeeze; based on a
+ patch by Marcin Juszkiewicz; closes: #607618.
+ * Add new patch, fix-definition-of-global_data-struct, from the upstream
+ x86 maintainer; fixes build of eNET board which breaks u-boot's build on
+ i386; closes: #608801.
+ * Workaround an upstream bug in distclean by removing include/asm/proc and
+ /arch explicitly for now; patch was sent upstream.
+ * Don't repeat Section: in binary package.
+ * Add myself to Uploaders.
+ * Split tools in u-boot-tools package.
+ * Drop board-specific tools; these are too dangerous; only ship mkimage for
+ now.
+ * Add igep0020 and omap3_beagle builds on armel
+ * Update snapshot.commit to the 2010.12 release contents; this avoids a
+ pointless diff with the tarball.
+
+ -- Loïc Minier <lool@debian.org> Mon, 17 Jan 2011 22:43:41 +0100
+
+u-boot (2010.12-1) unstable; urgency=low
+
+ * New upstream version.
+ * Install more tools in preparation for splitting off a
+ u-boot-tools binary package.
+
+ -- Clint Adams <clint@gnu.org> Tue, 28 Dec 2010 17:03:44 -0500
+
+u-boot (2010.12~rc3-1) unstable; urgency=low
+
+ * New upstream release candidate.
+ * Add dockstar target.
+
+ -- Clint Adams <clint@gnu.org> Sun, 19 Dec 2010 09:45:42 -0500
+
+u-boot (2010.12~rc2-1) unstable; urgency=low
+
+ * New upstream release candidate.
+ * Add openrd_base target.
+
+ -- Clint Adams <clint@gnu.org> Sat, 04 Dec 2010 15:32:38 -0500
+
+u-boot (2010.09-2) unstable; urgency=low
+
+ * Enable ext2 commands on GuruPlug.
+ * Ship ELF files (for loading into RAM with OpenOCD).
+
+ -- Clint Adams <clint@gnu.org> Sat, 20 Nov 2010 18:20:40 -0500
+
+u-boot (2010.09-1) unstable; urgency=low
+
+ * New upstream release.
+
+ -- Clint Adams <schizo@debian.org> Wed, 29 Sep 2010 00:06:25 -0400
+
+u-boot (2010.09~rc2-1) unstable; urgency=low
+
+ * New upstrem release candidate.
+
+ -- Clint Adams <schizo@debian.org> Sun, 19 Sep 2010 14:20:52 -0400
+
+u-boot (2010.09~rc1-2) unstable; urgency=low
+
+ * Add patch from Gérald Kerma to add Sheevaplug mvsata support.
+ * Add patch from Gérald Kerma to add Sheevaplug mvsdio support.
+
+ -- Clint Adams <schizo@debian.org> Sun, 12 Sep 2010 11:48:22 -0400
+
+u-boot (2010.09~rc1-1) unstable; urgency=low
+
+ * New upstream release candidate.
+ - Drop guruplug-miiphy_reset.diff.
+ - Update mipsel-native-endianness.diff.
+ - Drop sh4-native-compile.diff.
+ * Bump to Standards-Version 3.9.1.
+
+ -- Clint Adams <schizo@debian.org> Sat, 11 Sep 2010 00:43:04 -0400
+
+u-boot (2010.06-1) unstable; urgency=low
+
+ * New upstream version.
+
+ -- Clint Adams <schizo@debian.org> Sat, 03 Jul 2010 13:49:46 -0400
+
+u-boot (2010.06~rc3-1) unstable; urgency=low
+
+ * New upstream version.
+ * Fix sh4-native-compile.diff to not break sh64, thanks to Paul
+ Mundt.
+ * Ship mkimage, conflict/replace uboot-mkimage, build on all
+ architectures.
+
+ -- Clint Adams <schizo@debian.org> Fri, 25 Jun 2010 14:49:06 -0400
+
+u-boot (2010.06~rc2-1) unstable; urgency=medium
+
+ * Add sh4-native-compile.diff from Aurelien Jarno. closes: #586026.
+ * New upstream version.
+ - Drop marvell-machtypes.diff.
+
+ -- Clint Adams <schizo@debian.org> Tue, 15 Jun 2010 21:37:26 -0400
+
+u-boot (2010.06~rc1-6) unstable; urgency=medium
+
+ * Add guruplug-miiphy_reset.diff.
+ * Clean between targets. closes: #585570.
+
+ -- Clint Adams <schizo@debian.org> Fri, 11 Jun 2010 21:57:31 -0400
+
+u-boot (2010.06~rc1-5) unstable; urgency=low
+
+ * Replace mipsel-native-endianness.diff with patch adapted
+ from a 2008 mailing list posting by Shinya Kuribayashi.
+
+ -- Clint Adams <schizo@debian.org> Fri, 04 Jun 2010 20:08:27 -0400
+
+u-boot (2010.06~rc1-4) unstable; urgency=low
+
+ * Add r2dplus target for sh4.
+ * mipsel-native-endianness.diff: don't force endianness on mips/mipsel
+
+ -- Clint Adams <schizo@debian.org> Thu, 03 Jun 2010 19:32:50 -0400
+
+u-boot (2010.06~rc1-3) unstable; urgency=low
+
+ * Fix mipsel typo.
+ * Apply patch from Nobuhiro Iwamatsu to change sh4 target board
+ from espt to sh7785lcr_32bit. closes: #584192.
+
+ -- Clint Adams <schizo@debian.org> Wed, 02 Jun 2010 08:25:04 -0400
+
+u-boot (2010.06~rc1-2) unstable; urgency=low
+
+ * Produce u-boot.bin on i386.
+ * Switch mipsel target to AMD DBAu1100.
+ * Add marvell-machtypes.diff.
+
+ -- Clint Adams <schizo@debian.org> Mon, 31 May 2010 22:09:29 -0400
+
+u-boot (2010.06~rc1-1) unstable; urgency=low
+
+ * Add Vcs-Git and Vcs-Browser headers.
+ * Add GuruPlug target (armel).
+ * Switch mipsel target to TB0229.
+ * Add watch file.
+ * Update README.Debian for SheevaPlug and GuruPlug.
+
+ -- Clint Adams <schizo@debian.org> Mon, 31 May 2010 19:29:40 -0400
+
+u-boot (2010.03-1) unstable; urgency=low
+
+ * Initial packaging. closes: #583605.
+
+ -- Clint Adams <schizo@debian.org> Fri, 28 May 2010 16:20:39 -0400
--- /dev/null
+9
\ No newline at end of file
--- /dev/null
+Source: u-boot
+Section: admin
+Priority: optional
+Maintainer: Vagrant Cascadian <vagrant@debian.org>
+Uploaders: Loïc Minier <lool@debian.org>, Clint Adams <clint@debian.org>
+Build-Depends: debhelper (>= 9.20141010), bc, device-tree-compiler, dpkg-dev (>= 1.17.14), python:any [armhf], skales:native [arm64], libfdt-dev:native [arm64]
+Standards-Version: 3.9.8
+Homepage: http://www.denx.de/wiki/U-Boot/
+Vcs-Git: https://anonscm.debian.org/git/collab-maint/u-boot.git
+Vcs-Browser: https://anonscm.debian.org/cgit/collab-maint/u-boot.git/
+
+Package: u-boot
+Architecture: armel armhf avr32 mips sh4
+Multi-Arch: same
+Depends: ${misc:Depends},
+ u-boot-imx [armhf], u-boot-omap [armhf], u-boot-sunxi [armhf], u-boot-exynos [armhf]
+Description: A boot loader for embedded systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ ${uboot:platforms}
+
+Package: u-boot-imx
+Architecture: armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Breaks: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Replaces: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Description: A boot loader for imx systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various imx platforms.
+ ${uboot:platforms}
+
+Package: u-boot-qcom
+Architecture: arm64
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for qcom systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various qcom platforms.
+ ${uboot:platforms}
+
+Package: u-boot-tegra
+Architecture: armhf arm64
+Multi-Arch: same
+Depends: ${misc:Depends}
+Breaks: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Replaces: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Description: A boot loader for NVIDIA Tegra systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various NVIDIA Tegra platforms.
+ ${uboot:platforms}
+
+Package: u-boot-omap
+Architecture: armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Breaks: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Replaces: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Description: A boot loader for omap systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various omap and related
+ platforms.
+ ${uboot:platforms}
+
+Package: u-boot-sunxi
+Architecture: armhf arm64
+Multi-Arch: same
+Depends: ${misc:Depends}
+Breaks: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Replaces: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Description: A boot loader for sunxi systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Allwinner/sunxi
+ platforms.
+ ${uboot:platforms}
+
+Package: u-boot-exynos
+Architecture: armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for exynos systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Exynos platforms.
+ ${uboot:platforms}
+
+Package: u-boot-rockchip
+Architecture: armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for rockchip systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Rockchip platforms.
+ ${uboot:platforms}
+
+Package: u-boot-rpi
+Architecture: armel armhf arm64
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for Raspberry PI systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Raspberry PI
+ platforms.
+ ${uboot:platforms}
+
+Package: u-boot-tools
+Architecture: linux-any
+Multi-Arch: foreign
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Recommends: device-tree-compiler
+Breaks: uboot-envtools (<< 20081215-3~),
+ uboot-mkimage (<= 0.4build1),
+ u-boot (<< 2010.12-2)
+Replaces: uboot-envtools (<< 20081215-3~),
+ uboot-mkimage (<= 0.4build1),
+ u-boot (<< 2010.12-2)
+Description: companion tools for Das U-Boot bootloader
+ This package includes the mkimage program, which allows generation of U-Boot
+ images in various formats, and the fw_printenv and fw_setenv programs to read
+ and modify U-Boot's environment.
--- /dev/null
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: Das U-Boot
+Source: ftp://ftp.denx.de/pub/u-boot/
+Files-Excluded: *fpgadata*
+ arch/powerpc/cpu/mpc8xx/upatch.c
+ drivers/dma/MCD_tasks.c
+
+Files: *
+Copyright: 2000-2013 Wolfgang Denk <wd@denx.de>
+ 1995-2002 Russell King
+ 1996-1998 Russell King
+ 1996-1999 Russell King
+ 1996-2000 Russell King
+ 1996 Russell King
+ 1997-1999 Russell King
+ 1999-2002 Vojtech Pavlik
+ 1999 Linus Torvalds / 2000-2002 Transmeta Corporation
+ 1999 Russell King
+ 2000-2002 Russell King
+ 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ 2001, 2002, 2003 / 2004 Gary Jennejohn garyj@denx.de
+ 2002-2007 Aleph One Ltd
+ 2002-2011 Aleph One Ltd
+ 2002 Thomas Gleixner (tglx@linutronix.de)
+ 2003 Kai-Uwe Bloem / 2000-2002 Transmeta Corporation / 1999 Linus Torvalds
+ 2004 by David Brownell
+ 2004 Nokia Corporation
+ 2004 Thomas Gleixner (tglx@linutronix.de)
+ 2005-2006 by Texas Instruments
+ 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation / 2006-2007 Nokia Corporation
+ 2005-2007 Samsung Electronics
+ 2005-2007 Samsung Electronics / Samsung Electronics, 2009 / Nokia Corporation, 2007
+ 2005-2008 Samsung Electronics
+ 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2006-2007 Nokia Corporation
+ 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2008-2009 MontaVista Software, Inc. <source@mvista.com> / 2006-2007 Nokia Corporation
+ 2005, Seagate Technology LLC / 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ 2006-2007 Nokia Corporation / 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation
+ 2006-2007 Nokia Corporation / 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments
+ 2006-2007 Nokia Corporation / 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ 2006, 2007 University of Szeged, Hungary / 2006-2008 Nokia Corporation
+ 2006-2008 Nokia Corporation
+ 2006,2009 Freescale Semiconductor, Inc
+ 2006-2009 Solarflare Communications Inc
+ 2006 Freescale Semiconductor, Inc
+ 2006 Nokia Corporation / 2005-2007 by Texas Instruments
+ 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> / 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> / 2009 Ilya Yanok, <yanok@emcraft.com>
+ 2006 Thomas Gleixner <tglx@linutronix.de>
+ 2007-2011 Freescale Semiconductor, Inc
+ 2007 Freescale Semiconductor, Inc
+ 2008-2009 / 2006-2008 Nokia Corporation
+ 2008-2009 Freescale Semiconductor, Inc
+ 2008-2009, MontaVista Software, Inc. <source@mvista.com> / 2010, by Texas Instruments
+ 2008,2009 STMicroelectronics / 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> / 2009 Alessandro Rubini <rubini@unipv.it>
+ 2008-2010 / 2006-2008 Nokia Corporation
+ 2008-2011 Freescale Semiconductor, Inc
+ 2008, 2011 Freescale Semiconductor, Inc
+ 2008,2011 Freescale Semiconductor, Inc
+ 2008-2012 Freescale Semiconductor, Inc
+ 2008 Altera Corporation / 2010 Thomas Chou <thomas@wytron.com.tw>
+ 2008 Atmel Corporation / 2013 Jagannadha Sutradharudu Teki, Xilinx Inc
+ 2008 by Texas Instruments / 2008 Mentor Graphics Corporation
+ 2008 Dave S.r.l. <www.dave.eu>
+ 2008 Extreme Engineering Solutions, Inc
+ 2008 Freescale Semiconductor, Inc
+ 2008 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> / 2004-2007 ARM Limited
+ 2008 Kim B. Heino / 2009
+ 2008 Qstreams Networks, Inc
+ 2008 Samsung Electronics / 2008-2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ 2008 STMicroelectronics / 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> / 2009 Alessandro Rubini <rubini@unipv.it>
+ 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ 2009-2010 eXMeritus, A Boeing Company / 2008-2009 Freescale Semiconductor, Inc
+ 2009-2010 Freescale Semiconductor, Inc
+ 2009-2010 Texas Instruments, Inc
+ 2009-2011 Freescale Semiconductor, Inc
+ 2009 coresystems GmbH
+ 2009 Freescale Semiconductor, Inc
+ 2009 Micrel Inc / 2011 Bticino s.p.a, Roberto Cerati <roberto.cerati@bticino.it>
+ 2009 MontaVista Software, Inc. <source@mvista.com> / 2006-2007 Nokia Corporation / 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation
+ 2010-2011 Freescale Semiconductor, Inc
+ 2010-2011 NVIDIA Corporation
+ 2010-2012 NVIDIA Corporation
+ 2010-2013 NVIDIA Corporation
+ 2010 Broadcom / 2012 Oleksandr Tymoshenko / 2012 Stephen Warren
+ 2010 NISHIMOTO Hiroki / 2010 Renesas Solutions Corp
+ 2010 Thomas Chou <thomas@wytron.com.tw>
+ 2010, Thomas Chou <thomas@wytron.com.tw>
+ 2010 Thomas Chou <thomas@wytron.com.tw> / 2008-2009 Avionic Design GmbH / 2007-2008 Avionic Design Development GmbH
+ 2010 Thomas Chou <thomas@wytron.com.tw> / 2008 Altera Corporation
+ 2011-2012 Renesas Solutions Corp
+ 2011 - 2012 Samsung Electronics / 2003-2006, Cluster File Systems, Inc, info@clusterfs.com
+ 2011 Analog Devices Inc
+ 2011 Freescale Semiconductor, Inc
+ 2011 Infineon Technologies
+ 2011 Ivan Djelic <ivan.djelic@parrot.com>
+ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 1995-2002 Russell King / 2010 Shawn Lin (nobuhiro@andestech.com)
+ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 1996-1998 Russell King / 2010 Shawn Lin (nobuhiro@andestech.com)
+ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 2010 Shawn Lin (nobuhiro@andestech.com)
+ 2011 Maxim Integrated Products
+ 2011 Parrot S.A
+ 2011 Renesas Solutions Corp
+ 2011 Renesas Solutions Corp / 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ 2011 The ChromiumOS Authors. All rights reserved
+ 2012-2013 Stephen Warren
+ 2012, by Texas Instruments
+ 2012, Google Inc
+ 2012 Renesas Solutions Corp
+ 2012 Samsung Electronics Co., Ltd
+ 2012 Stephen Warren
+ 2012 Texas Instruments Incorporated - http://www.ti.com/
+ 2013 Synopsys, Inc. (www.synopsys.com)
+License: GPL-2
+
+Files:
+ drivers/tpm/tpm_atmel_twi.c
+ drivers/gpio/tca642x.c
+ include/splash.h
+ include/fdt.h
+ include/libfdt.h
+ include/configs/controlcenterd.h
+ include/configs/mxs.h
+ include/configs/T1040QDS.h
+ include/tca642x.h
+ board/gdsys/p1022/tlb.c
+ board/gdsys/p1022/sdhc_boot.c
+ board/gdsys/p1022/ddr.c
+ board/gdsys/p1022/controlcenterd-id.c
+ board/gdsys/p1022/diu.c
+ board/gdsys/p1022/controlcenterd-id.h
+ board/gdsys/p1022/controlcenterd.c
+ board/gdsys/p1022/law.c
+ board/gdsys/common/dp501.h
+ common/splash.c
+ fs/jffs2/compr_lzo.c
+ arch/arm/include/asm/arch-am33xx/hardware_ti816x.h
+ arch/arm/mach-exynos/dmc_init_exynos4.c
+ arch/arm/mach-exynos/lowlevel_init.c
+ arch/arm/mach-exynos/clock_init_exynos4.c
+ arch/arm/mach-exynos/common_setup.h
+ arch/arm/cpu/armv7/am33xx/clock_ti816x.c
+Copyright:
+ 2013 Texas Instruments, Inc
+ 2013, Boundary Devices <info@boundarydevices.com>
+ 2006 David Gibson, IBM Corporation
+ 2012 Kim Phillips, Freescale Semiconductor
+ 2010-2013 Freescale Semiconductor, Inc
+ 2013 Marek Vasut <marex@denx.de>
+ 2010-2011 Freescale Semiconductor, Inc
+ 2004 Patrik Kluba
+ 1996-2002 Markus Franz Xaver Johannes Oberhumer
+ 2013 NVIDIA Corporation
+ 2011 The Chromium OS Authors
+ 2013 Samsung Electronics
+ 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ 2009, Texas Instruments, Incorporated
+License: GPL-2+
+
+Files: debian/*
+Copyright: Clint Adams <clint@debian.org>
+ Joey Hess <joeyh@debian.org>
+ Marc Singer <elf@debian.org>
+ Per Andersson <avtobiff@gmail.com>
+ Vagrant Cascadian <vagrant@debian.org>
+ Loïc Minier <lool@debian.org>
+License: GPL-2+
+
+Files: fs/yaffs2/yaffs_allocator.h
+ fs/yaffs2/yaffs_verify.h
+ fs/yaffs2/yaffs_packedtags1.h
+ fs/yaffs2/yaffs_yaffs1.h
+ fs/yaffs2/ydirectenv.h
+ fs/yaffs2/yaffs_yaffs2.h
+ fs/yaffs2/yaffsfs.h
+ fs/yaffs2/yaffs_osglue.h
+ fs/yaffs2/yaffs_flashif.h
+ fs/yaffs2/yaffs_nand.h
+ fs/yaffs2/yportenv.h
+ fs/yaffs2/yaffs_packedtags2.h
+ fs/yaffs2/yaffs_attribs.h
+ fs/yaffs2/yaffs_ecc.h
+ fs/yaffs2/yaffs_trace.h
+ fs/yaffs2/yaffs_guts.h
+ fs/yaffs2/yaffs_getblockinfo.h
+ fs/yaffs2/yaffs_bitmap.h
+ fs/yaffs2/yaffs_nameval.h
+ fs/yaffs2/yaffscfg.h
+ fs/yaffs2/yaffs_nandemul2k.h
+ fs/yaffs2/yaffs_mtdif2.h
+ fs/yaffs2/yaffs_flashif2.h
+ fs/yaffs2/yaffs_checkptrw.h
+ fs/yaffs2/yaffs_tagscompat.h
+ fs/yaffs2/yaffs_nandif.h
+ fs/yaffs2/yaffs_summary.h
+ fs/yaffs2/yaffs_mtdif.h
+Copyright: Copyright (C) 2002-2011 Aleph One Ltd.
+License: LGPL-2.1
+
+Files: lib/sha1.c
+Copyright: Copyright (C) 2003-2006 Christophe Devine
+License: LGPL-2.1
+
+Files: include/bzlib.h
+ lib/bzip2/*
+Copyright: Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
+License: bzlib-BSD-3
+
+Files: drivers/usb/musb-new/musb_host.h
+ drivers/usb/musb-new/musb_core.h
+ drivers/usb/musb-new/musb_core.c
+ drivers/usb/musb-new/musb_gadget.c
+ drivers/usb/musb-new/musb_gadget.h
+ drivers/usb/musb-new/musb_dma.h
+ drivers/usb/musb-new/musb_regs.h
+ drivers/usb/musb-new/musb_debug.h
+ drivers/usb/musb-new/musb_host.c
+ drivers/usb/musb-new/musb_gadget_ep0.c
+ drivers/usb/musb-new/musb_io.h
+Copyright: Copyright 2005 Mentor Graphics Corporation
+ Copyright (C) 2005-2006 by Texas Instruments
+ Copyright (C) 2006-2007 Nokia Corporation
+ Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+License: GPL-2
+
+Files: net/dns.c
+ include/slre.h
+ lib/slre.c
+Copyright: 2008 Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
+ 2004-2005 Sergey Lyubka <valenok@gmail.com>
+ 2009 Robin Getz <rgetz@blackfin.uclinux.org>]
+License: Beerware
+
+Files: include/libfdt.h
+ include/fdt.h
+Copyright: 2006 David Gibson, IBM Corporation
+ 2012 Kim Phillips, Freescale Semiconductor
+License: libfdt-BSD-GPL
+
+Files: include/pcmcia/yenta.h
+Copyright: 1999 David A. Hinds. All Rights Reserved
+License: MPL-GPL
+
+License: MPL-GPL
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use
+ * your version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+
+License: libfdt-BSD-GPL
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+License: Beerware
+ "THE BEER-WARE LICENSE" (Revision 42):
+ Sergey Lyubka wrote this file. As long as you retain this notice you
+ can do whatever you want with this stuff. If we meet some day, and you think
+ this stuff is worth it, you can buy me a beer in return.
+
+License: GPL-2
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ version 2 as published by the Free Software Foundation.
+ .
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/GPL-2'.
+
+License: bzlib-BSD-3
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ .
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ .
+ 2. The origin of this software must not be misrepresented; you must
+ not claim that you wrote the original software. If you use this
+ software in a product, an acknowledgment in the product
+ documentation would be appreciated but is not required.
+ .
+ 3. Altered source versions must be plainly marked as such, and must
+ not be misrepresented as being the original software.
+ .
+ 4. The name of the author may not be used to endorse or promote
+ products derived from this software without specific prior written
+ permission.
+ .
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+ OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+License: GPL-2+
+ This program is free software; you can redistribute it
+ and/or modify it under the terms of the GNU General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later
+ version.
+ .
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ PURPOSE. See the GNU General Public License for more
+ details.
+ .
+ You should have received a copy of the GNU General Public
+ License along with this package; if not, write to the Free
+ Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+ Boston, MA 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/GPL-2'.
+
+License: LGPL-2.1
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License version 2.1 as
+ published by the Free Software Foundation.
+ .
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+ .
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ MA 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/LGPL-2.1'.
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd1 0x00000 0x10000 0x01000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd1 0x0 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x3F000 0x1000 0x1000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundand
+# environment sector is assumed present.
+
+# for Buffalo Linkstation Mini
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x3f000 0x01000 0x01000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x3F000 0x1000 0x1000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x30000 0x10000 0x10000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd4 0x360000 0x10000 0x10000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mmcblk0 0x80000 0x2000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR.
+
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd1 0x0000 0x4000 0x4000 2
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR.
+
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd2 0x0000 0x40000 0x20000 2
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+# Legacy u-boot versions:
+#/dev/mtd0 0xa0000 0x20000 0x20000
+
+# New u-boot versions:
+/dev/mtd0 0x60000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd5 0x00000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd4 0x0000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# This config is for QNAP TS-119, TS-219 and TS-219P boards.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd4 0x0000 0x1000 0x40000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+# Legacy u-boot versions:
+#/dev/mtd0 0x60000 0x20000 0x20000
+
+# New u-boot versions:
+/dev/mtd0 0x80000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mmcblk0 0xC0000 0x2000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mmcblk0 0x60000 0x2000
--- /dev/null
+.\" Copyright © 2008 Per Andersson <avtobiff@gmail.com>
+.\" This man page is covered by the GNU General Public License (GPLv2 or higher).
+.TH fw_printenv 8 "August 2008" "Debian Project" ""
+
+.SH NAME
+fw_printenv \- Tool for printing environment for the bootloader U-Boot
+
+.SH SYNOPSIS
+fw_printenv [ \fB\-n\fP \fIname\fP ] [ \fIname\fP \fI...\fP ]
+
+.SH DESCRIPTION
+\fIfw_printenv\fP is a simple tool for printing the environment for the
+bootloader U-Boot. All environment variables matching the names given as
+arguments are shown. If \fIfw_printenv\fP is called without any arguments the
+entire environment is printed.
+
+.SH OPTIONS
+.IP \fB\-n\fP
+If the \fBn\fP flag is set \fIfw_printenv\fP only prints the value of the supplied variable \fIname\fP.
+
+.SH FILES
+.IP \fB/etc/fw_env.config\fP
+Configuration file for fw_printenv.
+
+.SH SEE ALSO
+fw_setenv(8)
+
+.SH AUTHOR
+Wolfgang Denk <wd@denx.de>
+.PP
+This manual page was written by Per Andersson <avtobiff@gmail.com>
--- /dev/null
+.\" Copyright © 2008 Per Andersson <avtobiff@gmail.com>
+.\" This man page is covered by the GNU General Public License (GPLv2 or higher).
+.TH fw_setenv 8 "August 2008" "Debian Project" ""
+
+.SH NAME
+fw_setenv \- Tool for modifying the environment for the bootloader U\-Boot
+
+.SH SYNOPSIS
+fw_setenv \fIname\fP [ \fIvalue\fP ]
+
+.SH DESCRIPTION
+\fIfw_setenv\fP is a simple tool for modifying either the environment for the
+bootloader U-Boot. If the variable already is set in the environment it is
+updated, otherwise it is created and set. If only one argument is given,
+variable name, the corresponding variable is deleted.
+
+.SH FILES
+.IP \fB/etc/fw_env.config\fP
+Configuration file for fw_setenv.
+
+.SH SEE ALSO
+fw_printenv(8)
+
+.SH AUTHOR
+Wolfgang Denk <wd@denx.de>
+.PP
+This manual page was written by Per Andersson <avtobiff@gmail.com>
--- /dev/null
+From ebdb222b0d65bcc050e3f0fd6e97faf17fb3eae4 Mon Sep 17 00:00:00 2001
+Sender: Loïc Minier <loic.minier@linaro.org>
+From: Enric Balletbo i Serra <eballetbo@iseebcn.com>
+Date: Wed, 23 Feb 2011 14:35:41 +0100
+Subject: [PATCH] ARM: OMAP3: Revamp IGEP default configuration
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The default IGEP configuration doesn't do anything useful; using some
+boot.scr search logic like BeagleBoard is much more useful.
+
+Signed-off-by: Loïc Minier <loic.minier@linaro.org>
+---
+ include/configs/igep0020.h | 55 ++++++++++++++++++++++++++++++++++++++++---
+ 1 files changed, 51 insertions(+), 4 deletions(-)
+
+diff --git a/include/configs/igep0020.h b/include/configs/igep0020.h
+index c19ecc0..2466562 100644
+--- a/include/configs/igep0020.h
++++ b/include/configs/igep0020.h
+@@ -130,13 +130,60 @@
+ #define CONFIG_TWL4030_POWER 1
+
+ /* Environment information */
+-#define CONFIG_BOOTCOMMAND \
+- "mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0"
+-
+ #define CONFIG_BOOTDELAY 3
+
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+- "usbtty=cdc_acm\0"
++ "loadaddr=0x82000000\0" \
++ "usbtty=cdc_acm\0" \
++ "console=ttyS2,115200n8\0" \
++ "mpurate=500\0" \
++ "vram=12M\0" \
++ "dvimode=1024x768MR-16@60\0" \
++ "defaultdisplay=dvi\0" \
++ "mmcdev=0\0" \
++ "mmcroot=/dev/mmcblk0p2 rw\0" \
++ "mmcrootfstype=ext3 rootwait\0" \
++ "nandroot=/dev/mtdblock4 rw\0" \
++ "nandrootfstype=jffs2\0" \
++ "mmcargs=setenv bootargs console=${console} " \
++ "mpurate=${mpurate} " \
++ "vram=${vram} " \
++ "omapfb.mode=dvi:${dvimode} " \
++ "omapfb.debug=y " \
++ "omapdss.def_disp=${defaultdisplay} " \
++ "root=${mmcroot} " \
++ "rootfstype=${mmcrootfstype}\0" \
++ "nandargs=setenv bootargs console=${console} " \
++ "mpurate=${mpurate} " \
++ "vram=${vram} " \
++ "omapfb.mode=dvi:${dvimode} " \
++ "omapfb.debug=y " \
++ "omapdss.def_disp=${defaultdisplay} " \
++ "root=${nandroot} " \
++ "rootfstype=${nandrootfstype}\0" \
++ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
++ "bootscript=echo Running bootscript from mmc ...; " \
++ "source ${loadaddr}\0" \
++ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
++ "mmcboot=echo Booting from mmc ...; " \
++ "run mmcargs; " \
++ "bootm ${loadaddr}\0" \
++ "nandboot=echo Booting from nand ...; " \
++ "run nandargs; " \
++ "nand read ${loadaddr} 280000 400000; " \
++ "bootm ${loadaddr}\0" \
++
++#define CONFIG_BOOTCOMMAND \
++ "if mmc rescan ${mmcdev}; then " \
++ "if run loadbootscript; then " \
++ "run bootscript; " \
++ "else " \
++ "if run loaduimage; then " \
++ "run mmcboot; " \
++ "else run nandboot; " \
++ "fi; " \
++ "fi; " \
++ "else run nandboot; fi"
+
+ #define CONFIG_AUTO_COMPLETE 1
+
+--
+1.7.2.3
+
--- /dev/null
+Add u-boot.kwb to "make all" target on Kirkwood.
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -743,6 +743,7 @@ endif
+ ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
+ ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
+ ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
++ALL-$(CONFIG_KIRKWOOD) += u-boot.kwb
+ ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
+ ifeq ($(CONFIG_SPL_FRAMEWORK),y)
+ ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
--- /dev/null
+Add the debian revision to the U-boot version, which is displayed at
+boot and can be helpful to determine which specific version is used.
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -350,7 +350,7 @@ KBUILD_AFLAGS := -D__ASSEMBLY__
+
+ # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
+ UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
+-UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
++UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)$(DEBIAN_REVISION)
+
+ export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
+ export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
--- /dev/null
+Index: u-boot/include/configs/ti_omap5_common.h
+===================================================================
+--- u-boot.orig/include/configs/ti_omap5_common.h
++++ u-boot/include/configs/ti_omap5_common.h
+@@ -66,6 +66,18 @@
+ #define DFUARGS
+ #endif
+
++#define BOOT_TARGET_DEVICES(func) \
++ func(MMC, mmc, 0) \
++ func(MMC, mmc, 1) \
++ func(PXE, pxe, na) \
++ func(DHCP, dhcp, na)
++
++#define CONFIG_BOOTCOMMAND \
++ "run findfdt; " \
++ "run distro_bootcmd"
++
++#include <config_distro_bootcmd.h>
++
+ #ifndef CONFIG_SPL_BUILD
+ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+@@ -111,21 +123,8 @@
+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
+ DFUARGS \
+ NETARGS \
++ BOOTENV
+
+-#define CONFIG_BOOTCOMMAND \
+- "if test ${dofastboot} -eq 1; then " \
+- "echo Boot fastboot requested, resetting dofastboot ...;" \
+- "setenv dofastboot 0; saveenv;" \
+- "echo Booting into fastboot ...; fastboot 0;" \
+- "fi;" \
+- "run findfdt; " \
+- "run envboot; " \
+- "run mmcboot;" \
+- "setenv mmcdev 1; " \
+- "setenv bootpart 1:2; " \
+- "setenv mmcroot /dev/mmcblk0p2 rw; " \
+- "run mmcboot;" \
+- ""
+ #endif
+
+ /*
--- /dev/null
+Description: Add spl/arndale-spl.bin rule
+Author: Ian Campbell <ijc@debian.org>
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -1339,6 +1339,9 @@ spl/u-boot-spl-dtb.sfp: spl/u-boot-spl
+ spl/boot.bin: spl/u-boot-spl
+ @:
+
++spl/arndale-spl.bin: spl/u-boot-spl
++ @:
++
+ tpl/u-boot-tpl.bin: tools prepare
+ $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
+
--- /dev/null
+Index: u-boot/include/configs/am335x_evm.h
+===================================================================
+--- u-boot.orig/include/configs/am335x_evm.h
++++ u-boot/include/configs/am335x_evm.h
+@@ -312,12 +312,8 @@
+ #endif
+
+ #ifdef CONFIG_USB_MUSB_GADGET
+-/* Removing USB gadget and can be enabled adter adding support usb DM */
+-#ifndef CONFIG_DM_ETH
+-#define CONFIG_USB_ETHER
+-#define CONFIG_USB_ETH_RNDIS
+-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
+-#endif /* CONFIG_DM_ETH */
++#define CONFIG_CMD_USB_MASS_STORAGE
++#define CONFIG_USB_FUNCTION_MASS_STORAGE
+ #endif /* CONFIG_USB_MUSB_GADGET */
+
+ /*
--- /dev/null
+Ensure that CONFIG_SANDBOX is set when running "make env", avoiding a
+failure to build caused by config_distro_bootcmd.h following the wrong
+codepath...
+
+Index: u-boot/include/configs/sandbox.h
+===================================================================
+--- u-boot.orig/include/configs/sandbox.h
++++ u-boot/include/configs/sandbox.h
+@@ -127,6 +127,9 @@
+
+ #define CONFIG_BOOTCOMMAND ""
+
++#ifndef CONFIG_SANDBOX
++#define CONFIG_SANDBOX 1
++#endif
+ #include <config_distro_bootcmd.h>
+
+ #define CONFIG_KEEP_SERVERADDR
--- /dev/null
+Index: u-boot/include/compiler.h
+===================================================================
+--- u-boot.orig/include/compiler.h
++++ u-boot/include/compiler.h
+@@ -15,7 +15,7 @@
+ defined(__sun__) || \
+ defined(__APPLE__)
+ # include <inttypes.h>
+-#elif defined(__linux__) || defined(__WIN32__) || defined(__MINGW32__) || defined(__OpenBSD__)
++#elif defined(__linux__) || defined(__WIN32__) || defined(__MINGW32__) || defined(__OpenBSD__) || defined(__GLIBC__)
+ # include <stdint.h>
+ #endif
+
+@@ -41,7 +41,7 @@
+ #define O_BINARY 0
+ #endif
+
+-#ifdef __linux__
++#if defined(__linux__) || defined(__GLIBC__)
+ # include <endian.h>
+ # include <byteswap.h>
+ #elif defined(__MACH__) || defined(__FreeBSD__)
--- /dev/null
+[MIPS] Fix little-endian build with non-ELDK toolchains
+
+We've been in trouble for a long time when cross compiling with non-ELDK
+toolchains. This is caused by -EB passed to CPPFLAGS incorrectly, by the
+lack of an endian specifier to LDFLAGS, and by wrong OUTPUT_FORMATs.
+
+We're going to implement two workarounds. One is the endianness specifier
+bugfix not to pass -EB / -EL to CPPFLAGS unless ELDK toolchain is used.
+Note that ELDK and non-ELDK toolchains know their default endianness, so
+the endianness specifier may not be necessary in principle.
+
+The other is removal of OUTPUT_FORMAT in *.lds files. If we have this,
+it doesn't work unless an endianness specifier is added to LDFLAGS. As
+we haven't added that to LDFLAGS so far, it must have not worked properly,
+except ELDK; I don't know why and how ELDK works, though.
+
+With these two changes, all objects will be generated and linked in the
+toolchain's default endianness. Then MAKEALL mips_el will work even with
+non-ELDK toolchain.
+
+Note that Linux/MIPS kernel has CONFIG_CPU_BIG_ENDIAN and
+CONFIG_CPU_LITTLE_ENDIAN alternatives to allow users to compile kernels
+with a toolchain for the other endianness. But U-Boot does not have such
+feature for now, and it's another story.
+
+Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+---
+ board/dbau1x00/u-boot.lds | 4 ----
+ board/gth2/u-boot.lds | 4 ----
+ board/incaip/u-boot.lds | 4 ----
+ board/pb1x00/u-boot.lds | 4 ----
+ board/purple/u-boot.lds | 4 ----
+ board/qemu-mips/u-boot.lds | 4 ----
+ board/tb0229/u-boot.lds | 2 --
+ cpu/mips/config.mk | 8 --------
+ examples/mips.lds | 4 ----
+ mips_config.mk | 26 ++++++++++++++++++++++++++
+ 10 files changed, 26 insertions(+), 38 deletions(-)
+
+Index: u-boot/examples/standalone/mips.lds
+===================================================================
+--- u-boot.orig/examples/standalone/mips.lds
++++ u-boot/examples/standalone/mips.lds
+@@ -5,10 +5,6 @@
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+-/*
+-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+-*/
+-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
+ OUTPUT_ARCH(mips)
+ SECTIONS
+ {
--- /dev/null
+Use a relative path to include the sunxi spl header, which allows
+mksunxiboot to build on any arch.
+
+--- a/tools/mksunxiboot.c
++++ b/tools/mksunxiboot.c
+@@ -15,7 +15,7 @@
+ #include <errno.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+-#include "asm/arch/spl.h"
++#include "../arch/arm/include/asm/arch-sunxi/spl.h"
+
+ #define STAMP_VALUE 0x5F0A6C39
+
--- /dev/null
+Enables support for ext4, the "load" command, and using bootz with raw initrds.
+
+Index: u-boot/configs/mx53loco_defconfig
+===================================================================
+--- u-boot.orig/configs/mx53loco_defconfig
++++ u-boot/configs/mx53loco_defconfig
+@@ -12,6 +12,7 @@ CONFIG_CMD_DHCP=y
+ CONFIG_CMD_MII=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_EXT2=y
++CONFIG_CMD_EXT4=y
+ CONFIG_CMD_FAT=y
+ CONFIG_CMD_FS_GENERIC=y
+ CONFIG_USB=y
--- /dev/null
+Index: u-boot/include/configs/mx6cuboxi.h
+===================================================================
+--- u-boot.orig/include/configs/mx6cuboxi.h
++++ u-boot/include/configs/mx6cuboxi.h
+@@ -99,7 +99,7 @@
+ "initrd_high=0xffffffff\0" \
+ "fdt_high=0xffffffff\0" \
+ "ip_dyn=yes\0" \
+- "console=" CONFIG_CONSOLE_DEV "\0" \
++ "console=" CONFIG_CONSOLE_DEV ",115200\0" \
+ "bootm_size=0x10000000\0" \
+ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+ "update_sd_firmware=" \
--- /dev/null
+Enable booting of zImage/vmlinuz and initrd without requiring the use of
+mkimage to create uImage/uInitrd.
+
+Index: u-boot/include/configs/nokia_rx51.h
+===================================================================
+--- u-boot.orig/include/configs/nokia_rx51.h 2014-05-13 15:05:59.000000000 -0700
++++ u-boot/include/configs/nokia_rx51.h 2014-05-13 15:07:43.213088875 -0700
+@@ -136,6 +136,9 @@
+ #define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */
+ #define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */
+
++#define CONFIG_CMD_BOOTZ /* boot zImage */
++#define CONFIG_SUPPORT_RAW_INITRD
++
+ #ifdef ONENAND_SUPPORT
+
+ #define CONFIG_CMD_ONENAND /* ONENAND support */
--- /dev/null
+Index: u-boot/arch/powerpc/config.mk
+===================================================================
+--- u-boot.orig/arch/powerpc/config.mk
++++ u-boot/arch/powerpc/config.mk
+@@ -5,10 +5,6 @@
+ # SPDX-License-Identifier: GPL-2.0+
+ #
+
+-ifeq ($(CROSS_COMPILE),)
+-CROSS_COMPILE := ppc_8xx-
+-endif
+-
+ CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000
+ LDFLAGS_FINAL += --gc-sections
+ LDFLAGS_FINAL += --bss-plt
--- /dev/null
+Use the default bootdelay from distro_bootcmd.
+
+Index: u-boot/include/configs/odroid_xu3.h
+===================================================================
+--- u-boot.orig/include/configs/odroid_xu3.h
++++ u-boot/include/configs/odroid_xu3.h
+@@ -113,7 +113,6 @@
+ EXYNOS_FDTFILE_SETTING \
+ MEM_LAYOUT_ENV_SETTINGS \
+ BOOTENV \
+- "bootdelay=0\0" \
+ "rootfstype=ext4\0" \
+ "console=" CONFIG_DEFAULT_CONSOLE \
+ "fdtfile=exynos5422-odroidxu3.dtb\0" \
--- /dev/null
+From cfe02ff5b8c68b2108a91a9fc6f5309834d5d411 Mon Sep 17 00:00:00 2001
+From: Vagrant Cascadian <vagrant@debian.org>
+Date: Sat, 28 May 2016 16:08:39 -0700
+Subject: [PATCH] Convert odroid to use distro_bootcmd.
+
+---
+ include/configs/odroid.h | 23 +++++++++++++++++++----
+ 1 file changed, 19 insertions(+), 4 deletions(-)
+
+Index: u-boot/include/configs/odroid.h
+===================================================================
+--- u-boot.orig/include/configs/odroid.h
++++ u-boot/include/configs/odroid.h
+@@ -46,9 +46,7 @@
+ #define CONFIG_SYS_CONSOLE_INFO_QUIET
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+-#define CONFIG_BOOTARGS "Please use defined boot"
+-#define CONFIG_BOOTCOMMAND "run autoboot"
+-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
++#define CONFIG_DEFAULT_CONSOLE "ttySAC1,115200n8\0"
+
+ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
+ - GENERATED_GBL_DATA_SIZE)
+@@ -57,7 +55,7 @@
+
+ #define CONFIG_ENV_IS_IN_MMC
+ #define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
+-#define CONFIG_ENV_SIZE 4096
++#define CONFIG_ENV_SIZE 8192
+ #define CONFIG_ENV_OFFSET (SZ_1K * 1280) /* 1.25 MiB offset */
+ #define CONFIG_ENV_OVERWRITE
+
+@@ -90,6 +88,20 @@
+ "bl2 raw 0x1f 0x1d;" \
+ "tzsw raw 0x83f 0x138\0"
+
++#define BOOT_TARGET_DEVICES(func) \
++ func(MMC, mmc, 1) \
++ func(MMC, mmc, 0)
++
++#include <config_distro_bootcmd.h>
++
++#define MEM_LAYOUT_ENV_SETTINGS \
++ "bootm_size=0x10000000\0" \
++ "kernel_addr_r=0x42000000\0" \
++ "fdt_addr_r=0x43000000\0" \
++ "ramdisk_addr_r=0x43300000\0" \
++ "scriptaddr=0x50000000\0" \
++ "pxefile_addr_r=0x51000000\0"
++
+ /*
+ * Bootable media layout:
+ * dev: SD eMMC(part boot)
+@@ -168,7 +180,6 @@
+ "mmcbootpart=1\0" \
+ "mmcrootdev=0\0" \
+ "mmcrootpart=2\0" \
+- "bootdelay=0\0" \
+ "dfu_alt_system="CONFIG_DFU_ALT \
+ "dfu_alt_info=Please reset the board\0" \
+ "consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
+@@ -176,7 +187,9 @@
+ "initrdname=uInitrd\0" \
+ "initrdaddr=42000000\0" \
+ "scriptaddr=0x42000000\0" \
+- "fdtaddr=40800000\0"
++ "fdtaddr=40800000\0" \
++ MEM_LAYOUT_ENV_SETTINGS \
++ BOOTENV
+
+ /* I2C */
+ #define CONFIG_SYS_I2C_S3C24X0
--- /dev/null
+add-debian-revision-to-u-boot-version
+mipsel-native-endianness.diff
+no-force-CROSS_COMPILE-powerpc.diff
+tools-generic-builds.patch
+tools-only-in-no-dot-config-targets.diff
+Makefile-add-kwb-target-to-all.patch
+hurd.diff
+
+udoo/udoo_quad-support.patch
+udoo/udoo-standardized-variables
+
+mx53loco
+
+n900-bootz-raw-initrd.diff
+
+beagleboneblack/usb-mass-storage.patch
+
+arndale/board-spl-rule.diff
+
+sh4-fix-linker-name-prefix.patch
+
+ensure-config-sandbox-for-make-env.patch
+mksunxiboot-spl.patch
+
+mx6cuboxi/serial_console_speed.patch
+
+am57xx/omap5_distro_bootcmd
+
+odroid/0001-Convert-odroid-to-use-distro_bootcmd.patch
+
+odroid-xu3/bootdelay
+
+upstream/2016.09.01/0001-Revert-Increase-default-of-CONFIG_SYS_MALLOC_F_LEN-f.patch
+upstream/2016.09.01/0002-Revert-image-fit-switch-ENOLINK-to-ENOENT.patch
--- /dev/null
+Description: sh4-fix-linker-name-prefix.patch
+ u-boot currently fails to build from source on sh4 since the
+ linker name prefix defined in arch/sh/config.mk is outdated.
+ On current Debian installations, the binaries of the GNU
+ toolchain are named using the triplett scheme
+ $arch-$kernel-$toolchain. Thus, on sh4, the proper name
+ is "sh4-linux-gnu-ld" instead of "sh4-linux-ld". This
+ patch updates build configuration on sh4 to reflect that.
+
+---
+
+Origin: Debian
+Bug: (none yet)
+Bug-Debian: https://bugs.debian.org/771747
+Bug-Ubuntu: (none)
+Forwarded: (not yet)
+Reviewed-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+Last-Update: 2014-12-10
+
+--- u-boot-2014.10+dfsg1.orig/arch/sh/config.mk
++++ u-boot-2014.10+dfsg1/arch/sh/config.mk
+@@ -6,7 +6,7 @@
+ #
+
+ ifeq ($(CROSS_COMPILE),)
+-CROSS_COMPILE := sh4-linux-
++CROSS_COMPILE := sh4-linux-gnu-
+ endif
+
+ CONFIG_STANDALONE_LOAD_ADDR ?= 0x8C000000
--- /dev/null
+Description: Enable generic tools build
+Author: Hector Oron <zumbi@debian.org>
+
+--- u-boot-2014.10~rc2+dfsg1.orig/tools/Makefile
++++ u-boot-2014.10~rc2+dfsg1/tools/Makefile
+@@ -52,7 +52,7 @@ HOSTCFLAGS_xway-swap-bytes.o := -pedanti
+ hostprogs-y += mkenvimage
+ mkenvimage-objs := mkenvimage.o os_support.o lib/crc32.o
+
+-hostprogs-y += dumpimage mkimage
++hostprogs-y += dumpimage mkimage mksunxiboot kwboot
+ hostprogs-$(CONFIG_FIT_SIGNATURE) += fit_info fit_check_sign
+
+ FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := common/image-sig.o
--- /dev/null
+Revert upstream commit c7ad5cbb1ef2c33883f0fa7d0455095004fd306d:
+
+ Makefile: drop "tools-only" from no-dot-config-targets
+
+This indirectly pulls in a build-dependency on libssl-dev used for FIT
+image support, and possibly GPL/OpenSSL licensing incompatibility
+issues.
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -425,7 +425,7 @@ timestamp_h := include/generated/timesta
+
+ no-dot-config-targets := clean clobber mrproper distclean \
+ help %docs check% coccicheck \
+- ubootversion backup tests
++ ubootversion backup tests tools-only
+
+ config-targets := 0
+ mixed-targets := 0
--- /dev/null
+Adds standardized variables, fdtfile, fdt_addr_r, ramdisk_addr_r and
+kernel_addr_r.
+
+Index: u-boot/include/configs/udoo.h
+===================================================================
+--- u-boot.orig/include/configs/udoo.h
++++ u-boot/include/configs/udoo.h
+@@ -74,6 +74,9 @@
+ "initrd_high=0xffffffff\0" \
+ "fdt_file=undefined\0" \
+ "fdt_addr=0x18000000\0" \
++ "fdt_addr_r=0x18000000\0" \
++ "ramdisk_addr_r=0x13000000\0" \
++ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
+ "mmcdev=0\0" \
+@@ -146,8 +149,10 @@
+ "fi;\0" \
+ "findfdt=" \
+ "if test $board_rev = MX6Q ; then " \
++ "setenv fdtfile imx6q-udoo.dtb; " \
+ "setenv fdt_file imx6q-udoo.dtb; fi; " \
+ "if test $board_rev = MX6DL ; then " \
++ "setenv fdt_file imx6dl-udoo.dtb; " \
+ "setenv fdt_file imx6dl-udoo.dtb; fi; " \
+ "if test $fdt_file = undefined; then " \
+ "echo WARNING: Could not determine dtb to use; fi; \0"
--- /dev/null
+Description: Features and sane scripts for UDOO board
+ Enable the following features:
+ * Ext4
+ * Generic FS (load)
+ * Raw initramfs
+ Tweak scripts to:
+ * use generic "load" command to load files from FS.
+ * provide "loadzimage" macro.
+ * account for different locations of boot script file.
+Author: Michael Fladischer <FladischerMichael@fladi.at>
+Last-Update: 2014-07-01
+Forwarded: no
+
+Index: u-boot/include/configs/udoo.h
+===================================================================
+--- u-boot.orig/include/configs/udoo.h
++++ u-boot/include/configs/udoo.h
+@@ -95,11 +95,15 @@
+ "fi\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
++ "loadbootenv=load mmc ${mmcdev}:${mmcpart} ${loadaddr} uEnv.txt\0" \
++ "importbootenv=echo Importing environment from mmc (uEnv.txt)...; " \
++ "env import -t $loadaddr $filesize\0" \
+ "loadbootscript=" \
+ "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
++ "loadzimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage\0" \
+ "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+@@ -149,17 +153,33 @@
+ "echo WARNING: Could not determine dtb to use; fi; \0"
+
+ #define CONFIG_BOOTCOMMAND \
+- "run findfdt; " \
+- "mmc dev ${mmcdev}; if mmc rescan; then " \
+- "if run loadbootscript; then " \
+- "run bootscript; " \
+- "else " \
+- "if run loadimage; then " \
+- "run mmcboot; " \
+- "else run netboot; " \
+- "fi; " \
+- "fi; " \
+- "else run netboot; fi"
++ "run findfdt; " \
++ "mmc dev ${mmcdev};" \
++ "if mmc rescan; then " \
++ "echo SD/MMC found on device ${mmcdev};" \
++ "if run loadbootenv; then " \
++ "run importbootenv;" \
++ "fi;" \
++ "echo Checking if uenvcmd is set ...;" \
++ "if test -n $uenvcmd; then " \
++ "echo Running uenvcmd ...;" \
++ "run uenvcmd;" \
++ "fi;" \
++ "if run loadbootscript; then " \
++ "echo Running boot script ${script} ...;" \
++ "run bootscript; " \
++ "fi;" \
++ "setenv script /boot/${script};" \
++ "if run loadbootscript; then " \
++ "echo Running boot script ${script} ...;" \
++ "run bootscript; " \
++ "fi;" \
++ "echo Running default loadzimage ...;" \
++ "if run loadzimage; then " \
++ "run loadfdt;" \
++ "run mmcboot;" \
++ "fi;" \
++ "fi;"
+
+ /* Print Buffer Size */
+ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
--- /dev/null
+From 6baa904ad2374464de2c926387ae916a3e6b8cbd Mon Sep 17 00:00:00 2001
+From: Tom Rini <trini@konsulko.com>
+Date: Mon, 19 Sep 2016 10:42:32 -0400
+Subject: [PATCH 1/3] Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for
+ SPL_OF_CONTROL"
+
+This increase is too large and causes other problems, and we're still
+discussing things.
+
+This reverts commit 90c08d9e08c7a108ab904f3bbdeb558081757892.
+
+Signed-off-by: Tom Rini <trini@konsulko.com>
+---
+ Kconfig | 1 -
+ configs/clearfog_defconfig | 1 +
+ configs/db-88f6720_defconfig | 1 +
+ configs/db-88f6820-gp_defconfig | 1 +
+ configs/db-mv784mp-gp_defconfig | 1 +
+ configs/ds414_defconfig | 1 +
+ configs/maxbcm_defconfig | 1 +
+ configs/sandbox_spl_defconfig | 1 +
+ configs/socfpga_arria5_defconfig | 1 +
+ configs/socfpga_cyclone5_defconfig | 1 +
+ configs/socfpga_de0_nano_soc_defconfig | 1 +
+ configs/socfpga_is1_defconfig | 1 +
+ configs/socfpga_mcvevk_defconfig | 1 +
+ configs/socfpga_sockit_defconfig | 1 +
+ configs/socfpga_socrates_defconfig | 1 +
+ configs/socfpga_sr1500_defconfig | 1 +
+ configs/socfpga_vining_fpga_defconfig | 1 +
+ configs/theadorable_debug_defconfig | 1 +
+ configs/theadorable_defconfig | 1 +
+ configs/uniphier_ld11_defconfig | 1 +
+ configs/uniphier_ld20_defconfig | 1 +
+ configs/uniphier_ld4_sld8_defconfig | 1 +
+ configs/uniphier_pro4_defconfig | 1 +
+ configs/uniphier_pxs2_ld6b_defconfig | 1 +
+ configs/uniphier_sld3_defconfig | 1 +
+ 25 files changed, 24 insertions(+), 1 deletion(-)
+
+diff --git a/Kconfig b/Kconfig
+index fdea71e..45a0669 100644
+--- a/Kconfig
++++ b/Kconfig
+@@ -83,7 +83,6 @@ config SYS_MALLOC_F
+ config SYS_MALLOC_F_LEN
+ hex "Size of malloc() pool before relocation"
+ depends on SYS_MALLOC_F
+- default 0x2000 if SPL_DM && SPL_OF_CONTROL
+ default 0x400
+ help
+ Before relocation, memory is very limited on many platforms. Still,
+diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig
+index 778cf06..3bf5388 100644
+--- a/configs/clearfog_defconfig
++++ b/configs/clearfog_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_MVEBU=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_CLEARFOG=y
+ CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog"
+ CONFIG_SPL=y
+diff --git a/configs/db-88f6720_defconfig b/configs/db-88f6720_defconfig
+index b6df961..f06f27f 100644
+--- a/configs/db-88f6720_defconfig
++++ b/configs/db-88f6720_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_MVEBU=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_DB_88F6720=y
+ CONFIG_DEFAULT_DEVICE_TREE="armada-375-db"
+ # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+diff --git a/configs/db-88f6820-gp_defconfig b/configs/db-88f6820-gp_defconfig
+index 7ac7457..123e7fc 100644
+--- a/configs/db-88f6820-gp_defconfig
++++ b/configs/db-88f6820-gp_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_MVEBU=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_DB_88F6820_GP=y
+ CONFIG_DEFAULT_DEVICE_TREE="armada-388-gp"
+ CONFIG_SPL=y
+diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig
+index 510554e..f2c4a9e 100644
+--- a/configs/db-mv784mp-gp_defconfig
++++ b/configs/db-mv784mp-gp_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_MVEBU=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_DB_MV784MP_GP=y
+ CONFIG_DEFAULT_DEVICE_TREE="armada-xp-gp"
+ # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig
+index f95a9df..f2b26c7 100644
+--- a/configs/ds414_defconfig
++++ b/configs/ds414_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_MVEBU=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_DS414=y
+ CONFIG_DEFAULT_DEVICE_TREE="armada-xp-synology-ds414"
+ CONFIG_SPL=y
+diff --git a/configs/maxbcm_defconfig b/configs/maxbcm_defconfig
+index 22186c3..b67bc51 100644
+--- a/configs/maxbcm_defconfig
++++ b/configs/maxbcm_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_MVEBU=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_MAXBCM=y
+ CONFIG_DEFAULT_DEVICE_TREE="armada-xp-maxbcm"
+ CONFIG_SPL=y
+diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
+index 808ac34..0aadaa9 100644
+--- a/configs/sandbox_spl_defconfig
++++ b/configs/sandbox_spl_defconfig
+@@ -1,3 +1,4 @@
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_MMC=y
+ CONFIG_SANDBOX_SPL=y
+ CONFIG_PCI=y
+diff --git a/configs/socfpga_arria5_defconfig b/configs/socfpga_arria5_defconfig
+index a6d4945..85e7f85 100644
+--- a/configs/socfpga_arria5_defconfig
++++ b/configs/socfpga_arria5_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_SOCFPGA=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_SOCFPGA_ARRIA5_SOCDK=y
+ CONFIG_SPL_STACK_R_ADDR=0x00800000
+ CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_socdk"
+diff --git a/configs/socfpga_cyclone5_defconfig b/configs/socfpga_cyclone5_defconfig
+index b34e7e5..27908b9 100644
+--- a/configs/socfpga_cyclone5_defconfig
++++ b/configs/socfpga_cyclone5_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_SOCFPGA=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK=y
+ CONFIG_SPL_STACK_R_ADDR=0x00800000
+ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk"
+diff --git a/configs/socfpga_de0_nano_soc_defconfig b/configs/socfpga_de0_nano_soc_defconfig
+index 127f36c..474245b 100644
+--- a/configs/socfpga_de0_nano_soc_defconfig
++++ b/configs/socfpga_de0_nano_soc_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_SOCFPGA=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y
+ CONFIG_SPL_STACK_R_ADDR=0x00800000
+ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc"
+diff --git a/configs/socfpga_is1_defconfig b/configs/socfpga_is1_defconfig
+index d23afbf..5cd58f5 100644
+--- a/configs/socfpga_is1_defconfig
++++ b/configs/socfpga_is1_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_SOCFPGA=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_SOCFPGA_IS1=y
+ CONFIG_SPL_STACK_R_ADDR=0x00800000
+ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_is1"
+diff --git a/configs/socfpga_mcvevk_defconfig b/configs/socfpga_mcvevk_defconfig
+index 0100726..8f4e4a8 100644
+--- a/configs/socfpga_mcvevk_defconfig
++++ b/configs/socfpga_mcvevk_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_SOCFPGA=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_SOCFPGA_DENX_MCVEVK=y
+ CONFIG_SPL_STACK_R_ADDR=0x00800000
+ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_mcvevk"
+diff --git a/configs/socfpga_sockit_defconfig b/configs/socfpga_sockit_defconfig
+index d708e13..e5df2ce 100644
+--- a/configs/socfpga_sockit_defconfig
++++ b/configs/socfpga_sockit_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_SOCFPGA=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_SOCFPGA_TERASIC_SOCKIT=y
+ CONFIG_SPL_STACK_R_ADDR=0x00800000
+ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sockit"
+diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig
+index 35dad70..3832bb8 100644
+--- a/configs/socfpga_socrates_defconfig
++++ b/configs/socfpga_socrates_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_SOCFPGA=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_SOCFPGA_EBV_SOCRATES=y
+ CONFIG_SPL_STACK_R_ADDR=0x00800000
+ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates"
+diff --git a/configs/socfpga_sr1500_defconfig b/configs/socfpga_sr1500_defconfig
+index 2a4494f..309537f 100644
+--- a/configs/socfpga_sr1500_defconfig
++++ b/configs/socfpga_sr1500_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_SOCFPGA=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_SOCFPGA_SR1500=y
+ CONFIG_SPL_STACK_R_ADDR=0x00800000
+ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sr1500"
+diff --git a/configs/socfpga_vining_fpga_defconfig b/configs/socfpga_vining_fpga_defconfig
+index 7fdaeca..6dbbcb2 100644
+--- a/configs/socfpga_vining_fpga_defconfig
++++ b/configs/socfpga_vining_fpga_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_SOCFPGA=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_SOCFPGA_SAMTEC_VINING_FPGA=y
+ CONFIG_SPL_STACK_R_ADDR=0x00800000
+ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_vining_fpga"
+diff --git a/configs/theadorable_debug_defconfig b/configs/theadorable_debug_defconfig
+index a918d1f..61877af 100644
+--- a/configs/theadorable_debug_defconfig
++++ b/configs/theadorable_debug_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_MVEBU=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_THEADORABLE=y
+ CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable"
+ # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+diff --git a/configs/theadorable_defconfig b/configs/theadorable_defconfig
+index 8757c60..7104aa8 100644
+--- a/configs/theadorable_defconfig
++++ b/configs/theadorable_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_MVEBU=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_TARGET_THEADORABLE=y
+ CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable"
+ # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+diff --git a/configs/uniphier_ld11_defconfig b/configs/uniphier_ld11_defconfig
+index 703d871..d593f1b 100644
+--- a/configs/uniphier_ld11_defconfig
++++ b/configs/uniphier_ld11_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_UNIPHIER=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_ARCH_UNIPHIER_LD11=y
+ CONFIG_MICRO_SUPPORT_CARD=y
+ CONFIG_SYS_TEXT_BASE=0x84000000
+diff --git a/configs/uniphier_ld20_defconfig b/configs/uniphier_ld20_defconfig
+index c4a8547..d6443fd 100644
+--- a/configs/uniphier_ld20_defconfig
++++ b/configs/uniphier_ld20_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_UNIPHIER=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_ARCH_UNIPHIER_LD20=y
+ CONFIG_MICRO_SUPPORT_CARD=y
+ CONFIG_SYS_TEXT_BASE=0x84000000
+diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig
+index e3ad160..6c9f0f4 100644
+--- a/configs/uniphier_ld4_sld8_defconfig
++++ b/configs/uniphier_ld4_sld8_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_UNIPHIER=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_ARCH_UNIPHIER_LD4_SLD8=y
+ CONFIG_MICRO_SUPPORT_CARD=y
+ CONFIG_SYS_TEXT_BASE=0x84000000
+diff --git a/configs/uniphier_pro4_defconfig b/configs/uniphier_pro4_defconfig
+index a7dcc56..d65da62 100644
+--- a/configs/uniphier_pro4_defconfig
++++ b/configs/uniphier_pro4_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_UNIPHIER=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_MICRO_SUPPORT_CARD=y
+ CONFIG_SYS_TEXT_BASE=0x84000000
+ CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref"
+diff --git a/configs/uniphier_pxs2_ld6b_defconfig b/configs/uniphier_pxs2_ld6b_defconfig
+index 131c416..e07a9ba 100644
+--- a/configs/uniphier_pxs2_ld6b_defconfig
++++ b/configs/uniphier_pxs2_ld6b_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_UNIPHIER=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_ARCH_UNIPHIER_PRO5_PXS2_LD6B=y
+ CONFIG_MICRO_SUPPORT_CARD=y
+ CONFIG_SYS_TEXT_BASE=0x84000000
+diff --git a/configs/uniphier_sld3_defconfig b/configs/uniphier_sld3_defconfig
+index 1c5cece..6ce26bf 100644
+--- a/configs/uniphier_sld3_defconfig
++++ b/configs/uniphier_sld3_defconfig
+@@ -1,5 +1,6 @@
+ CONFIG_ARM=y
+ CONFIG_ARCH_UNIPHIER=y
++CONFIG_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_ARCH_UNIPHIER_SLD3=y
+ CONFIG_MICRO_SUPPORT_CARD=y
+ CONFIG_SYS_TEXT_BASE=0x84000000
+--
+2.9.3
+
--- /dev/null
+From 44e3dd14028545fa534cea38f0116f7a75f42b5d Mon Sep 17 00:00:00 2001
+From: Tom Rini <trini@konsulko.com>
+Date: Mon, 19 Sep 2016 10:43:12 -0400
+Subject: [PATCH 2/3] Revert "image-fit: switch ENOLINK to ENOENT"
+
+As while I want to support OpenBSD hosts, this change broke FIT images
+as in the image checking code we care about ENOLINK and on further
+review we need to think about what to change ENOLINK to so we can be
+sure to handle the different cases here.
+
+This reverts commit bac17b78daceeba1af2e1d8cd204ee460c71c93a.
+
+Signed-off-by: Tom Rini <trini@konsulko.com>
+---
+ common/image-fit.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/common/image-fit.c b/common/image-fit.c
+index 9ce68f1..f833fe3 100644
+--- a/common/image-fit.c
++++ b/common/image-fit.c
+@@ -1566,7 +1566,7 @@ int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name,
+ noffset = fit_conf_get_prop_node(fit_hdr, cfg_noffset, prop_name);
+ if (noffset < 0) {
+ debug("* %s: no '%s' in config\n", prop_name, prop_name);
+- return -ENOENT;
++ return -ENOLINK;
+ }
+
+ return noffset;
+--
+2.9.3
+
--- /dev/null
+#!/usr/bin/make -f
+
+DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+export DEBIAN_REVISION ?= $(shell dpkg-parsechangelog --show-field Version | sed -e 's,.*+dfsg,+dfsg,')
+export SOURCE_DATE_EPOCH = $(shell date -d "$$(dpkg-parsechangelog --count 1 --show-field Date)" +%s)
+
+ifneq ($(DEB_BUILD_GNU_TYPE),$(DEB_HOST_GNU_TYPE))
+export CROSS_COMPILE ?= $(DEB_HOST_GNU_TYPE)-
+cross_build_tools ?= y
+endif
+
+# support parallel build using DEB_BUILD_OPTIONS=parallel=N
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ DEB_UBOOT_FLAGS += -j$(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+endif
+
+# the upstream build passes LDFLAGS directly to ld instead of calling gcc for
+# linking; so instead of passing -Wl,foo in LDFLAGS as in automake builds, one
+# should set LDFLAGS to foo directly
+comma := ,
+LDFLAGS := $(patsubst -Wl$(comma)%,%,$(LDFLAGS))
+
+%:
+ dh $@ --parallel
+
+override_dh_auto_build: TOOLSDIR := debian/build/tools
+override_dh_auto_build:
+ set -e; sed -n 's/^$(DEB_HOST_ARCH)[[:space:]]\+//p' debian/targets \
+ | while read subarch platform targets; do \
+ builddir=debian/build/$$platform; \
+ targets="$$targets uboot.elf" ;\
+ mkdir -p $$builddir; \
+ $(MAKE) O=$$builddir $${platform}_defconfig; \
+ $(MAKE) $(DEB_UBOOT_FLAGS) O=$$builddir all; \
+ install -m 644 $$builddir/u-boot $$builddir/uboot.elf; \
+ $(CROSS_COMPILE)strip --remove-section=.comment \
+ $$builddir/uboot.elf; \
+ for target in $$targets; do \
+ chmod -x $$builddir/$$target; \
+ echo $$builddir/$$target /usr/lib/u-boot/$$platform/ \
+ >> debian/build/targets.$$subarch; \
+ echo $$platform >> debian/build/platforms.$$subarch; \
+ done ; \
+ case $${subarch} in \
+ rockchip) \
+ $$builddir/tools/mkimage -T rksd -n rk3288 \
+ -d $$builddir/spl/u-boot-spl.bin $$builddir/u-boot-spl.rksd; \
+ echo $$builddir/u-boot-spl.rksd /usr/lib/u-boot/$$platform/ \
+ >> debian/build/targets.$$subarch; \
+ ;; \
+ qcom) \
+ touch $$builddir/rd; \
+ skales-dtbtool -o $$builddir/dt.img $$builddir/arch/arm/dts; \
+ skales-mkbootimg --kernel $$builddir/u-boot-dtb.bin \
+ --output=$$builddir/u-boot.img --dt=$$builddir/dt.img \
+ --pagesize 2048 --base 0x80000000 \
+ --ramdisk=$$builddir/rd --cmdline=""; \
+ echo $$builddir/u-boot.img /usr/lib/u-boot/$$platform/ \
+ >> debian/build/targets.$$subarch; \
+ ;; \
+ esac; \
+ done
+
+ # Avoid requirement for .config
+ mkdir -p $(TOOLSDIR)/include/config
+ touch $(TOOLSDIR)/include/config/auto.conf
+ # Load dummy config
+ $(MAKE) O=$(TOOLSDIR) CROSS_COMPILE=$(CROSS_COMPILE) sandbox_defconfig
+ # board-independent tools
+ $(MAKE) O=$(TOOLSDIR) $(DEB_UBOOT_FLAGS) \
+ CROSS_COMPILE=$(CROSS_COMPILE) \
+ CROSS_BUILD_TOOLS=$(cross_build_tools) \
+ NO_SDL=1 \
+ tools-only
+ $(MAKE) O=$(TOOLSDIR) $(DEB_UBOOT_FLAGS) \
+ CROSS_COMPILE=$(CROSS_COMPILE) \
+ NO_SDL=1 \
+ env
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/env/fw_printenv
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/mkimage
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/mkenvimage
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/kwboot
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/mksunxiboot
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/dumpimage
+
+override_dh_auto_test:
+ # skip tests.
+
+override_dh_clean:
+ rm -rf debian/build/
+ dh_clean
+
+override_dh_gencontrol:
+ debian/bin/update-substvars
+ dh_gencontrol
+
+get-orig-source:
+ # Use uscan from the devscripts package to download new
+ # tarball, remove files incompatible with the DFSG (see
+ # Files-Excluded in debian/copyright), and repack with xz
+ # compression.
+ uscan --download --repack --compression=xz
--- /dev/null
+3.0 (quilt)
--- /dev/null
+tools/logos/solidrun.bmp
+debian/upstream/signing-key.pgp
--- /dev/null
+# ARCH subarch platform target
+# --------------------------------------------
+armel - dockstar u-boot.kwb
+
+# Ian Campbell <ijc@debian.org>
+armel - dreamplug u-boot.kwb
+
+# drEagle <drEagle@doukki.net>
+armel - guruplug u-boot.kwb
+
+# Vagrant Cascadian <vagrant@debian.org>, rpi B 256M
+armel rpi rpi u-boot.bin
+
+# drEagle <drEagle@doukki.net>
+# Rick Thomas <rbthomas@rcthomas.org>
+armel - sheevaplug u-boot.kwb
+
+armhf exynos arndale u-boot.bin spl/arndale-spl.bin
+
+# Joost van Zwieten <joostvanzwieten@gmail.com>, Odroid-U3
+armhf exynos odroid u-boot.bin
+
+# Vagrant Cascadian <vagrant@debian.org>, Odroid-XU4
+armhf exynos odroid-xu3 u-boot.bin
+
+# Robert Nelson <robertcnelson@gmail.com>
+armhf imx mx53loco u-boot.imx
+
+# Steve Langasek <vorlon@debian.org>, CuBox-i4
+# Vagrant Cascadian <vagrant@debian.org>, CuBox-i4, hummingboard-i1, hummingboard-i2ex
+# Rainer Dorsch <ml@bokomoko.de>, CuBox-i2u (i2u-300-d)
+armhf imx mx6cuboxi u-boot.img spl/u-boot-spl.bin SPL
+
+# Hector Oron <zumbi@debian.org>
+armhf imx nitrogen6q u-boot.imx
+
+# Tony Mancill <tmancill@debian.org>
+armhf imx novena u-boot.img spl/u-boot-spl.bin SPL
+
+# Michael Fladischer <michael@fladi.at>
+armhf imx udoo u-boot.img spl/u-boot-spl.bin SPL
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf imx usbarmory u-boot.imx
+
+# Vagrant Cascadian <vagrant@debian.org>
+# Robert Nelson <robertcnelson@gmail.com>
+armhf imx wandboard u-boot.img spl/u-boot-spl.bin SPL
+
+# Ian Campbell <ijc@debian.org>
+armhf tegra jetson-tk1 u-boot-tegra.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+# Andrew M.A. Cater <amacater@galactic.demon.co.uk>
+armhf omap am335x_boneblack u-boot.img spl/u-boot-spl.bin MLO
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf omap am57xx_evm u-boot.img spl/u-boot-spl.bin MLO
+
+# Ben Hutchings <ben.hutchings@codethink.co.uk>
+armhf omap dra7xx_evm u-boot.img spl/u-boot-spl.bin MLO
+
+# Robert Nelson <robertcnelson@gmail.com>
+armhf omap igep0020 u-boot.img spl/u-boot-spl.bin MLO
+
+armhf omap nokia_rx51 u-boot.bin
+
+# Robert Nelson <robertcnelson@gmail.com>
+armhf omap omap3_beagle u-boot.img spl/u-boot-spl.bin MLO
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf omap omap3_pandora u-boot.bin
+
+# Robert Nelson <robertcnelson@gmail.com>
+armhf omap omap4_panda u-boot.img spl/u-boot-spl.bin MLO
+
+# Emilio Pozuelo Monfort <pochu@debian.org>
+# Sjoerd Simons <sjoerd@debian.org>
+armhf rockchip firefly-rk3288 u-boot.img spl/u-boot-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>, Raspberry PI 2B
+armhf rpi rpi_2 u-boot.bin
+
+# Ryan Finnie <ryan@finnie.org>
+armhf rpi rpi_3_32b u-boot.bin
+
+# Christian Kastner <debian@kvr.at>
+armhf sunxi A10-OLinuXino-Lime u-boot-sunxi-with-spl.bin
+
+# Benedikt Wildenhain <esperanto@benedikt-wildenhain.de>
+armhf sunxi A10s-OLinuXino-M u-boot-sunxi-with-spl.bin
+
+# Karsten Merker <merker@debian.org>
+armhf sunxi A20-Olimex-SOM-EVB u-boot-sunxi-with-spl.bin
+
+# Christian Kastner <debian@kvr.at>
+armhf sunxi A20-OLinuXino-Lime u-boot-sunxi-with-spl.bin
+
+# Karsten Merker <merker@debian.org>
+armhf sunxi A20-OLinuXino-Lime2 u-boot-sunxi-with-spl.bin
+
+# Arne Ploese <aploese@gmx.de>
+armhf sunxi A20-OLinuXino_MICRO u-boot-sunxi-with-spl.bin
+
+# Ian Campbell <ijc@debian.org>
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi Bananapi u-boot-sunxi-with-spl.bin
+
+# Karsten Merker <merker@debian.org>
+armhf sunxi Bananapro u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi CHIP u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi Cubieboard u-boot-sunxi-with-spl.bin
+
+# Ian Campbell <ijc@debian.org>
+# Karsten Merker <merker@debian.org>
+armhf sunxi Cubieboard2 u-boot-sunxi-with-spl.bin
+
+# Ian Campbell <ijc@debian.org>
+# Robert Nelson <robertcnelson@gmail.com>
+# Karsten Merker <merker@debian.org>
+armhf sunxi Cubietruck u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi Cubietruck_plus u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi Lamobo_R1 u-boot-sunxi-with-spl.bin
+
+# Robert Hegner <rhegner@hsr.ch>
+armhf sunxi Linksprite_pcDuino u-boot-sunxi-with-spl.bin
+
+# Patrice Go <patgsiosisr@gmail.com>
+armhf sunxi Linksprite_pcDuino3 u-boot-sunxi-with-spl.bin
+
+# Jochen Sprickerhof <debian@jochen.sprickerhof.de>
+armhf sunxi Mini-X u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>, Orange PI Plus2
+armhf sunxi orangepi_plus u-boot-sunxi-with-spl.bin
+
+# Ryan Finnie <ryan@finnie.org>
+arm64 rpi rpi_3 u-boot.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+arm64 sunxi pine64_plus u-boot.bin
+
+# Martin Michlmayr <tbm@cyrius.com>
+arm64 tegra p2371-2180 u-boot.bin
+
+avr32 - hammerhead u-boot.img
+
+mips - qemu_mips u-boot.bin
+
+sh4 - r2dplus u-boot.bin
+
+sh4 - sh7785lcr_32bit u-boot.bin
+
+# Ricardo Salveti <rsalveti@rsalveti.net>
+arm64 qcom dragonboard410c u-boot.bin
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets exynos "doc/README.odroid"
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-exynos [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/arndale/uboot.elf
+u-boot-exynos [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/odroid/uboot.elf
+u-boot-exynos [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/odroid-xu3/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-exynos [armhf]: statically-linked-binary usr/lib/u-boot/arndale/uboot.elf
+u-boot-exynos [armhf]: statically-linked-binary usr/lib/u-boot/odroid/uboot.elf
+u-boot-exynos [armhf]: statically-linked-binary usr/lib/u-boot/odroid-xu3/uboot.elf
+
+u-boot-exynos: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-exynos: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+MX53LOCO:
+
+ dd bs=1024 if=u-boot.imx of=/dev/sdX seek=1
+
+wandboard (quad, dual-lite and solo):
+
+ dd if=/usr/lib/u-boot/wandboard/SPL of=/dev/mmcblk0 bs=1k seek=1
+ dd if=/usr/lib/u-boot/wandboard/u-boot.img of=/dev/mmcblk0 bs=1k seek=69
+
+mx6cuboxi (Cubox-i and Hummingboard):
+
+ dd if=/usr/lib/u-boot/mx6cuboxi/SPL of=/dev/mmcblk0 bs=1k seek=1
+ dd if=/usr/lib/u-boot/mx6cuboxi/u-boot.img of=/dev/mmcblk0 bs=1k seek=69
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets imx
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/mx53loco/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/mx6cuboxi/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/nitrogen6q/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/novena/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/udoo/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/usbarmory/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/wandboard/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/mx53loco/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/mx6cuboxi/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/nitrogen6q/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/novena/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/udoo/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/usbarmory/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/wandboard/uboot.elf
+
+u-boot-imx: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-imx: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+The BeagleBone Black (am335x_boneblack) can be flashed to microSD or eMMC directly:
+
+ dd if=/usr/lib/u-boot/am335x_boneblack/MLO of=/dev/mmcblkX count=1 seek=1 conv=notrunc bs=128k
+ dd if=/usr/lib/u-boot/am335x_boneblack/u-boot.img of=/dev/mmcblkX count=2 seek=1 conv=notrunc bs=384k
+
+On OpenPandora:
+
+ modprobe nand_omap2 mtdblock
+ dd if=/usr/lib/u-boot/omap3_pandora/u-boot.bin of=/dev/mtdblock1
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
+
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets omap "doc/README.nokia_rx51"
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/am335x_boneblack/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/am57xx_evm/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/dra7xx_evm/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/igep0020/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/nokia_rx51/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/omap3_beagle/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/omap3_pandora/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/omap4_panda/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/am335x_boneblack/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/am57xx_evm/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/dra7xx_evm/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/igep0020/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/nokia_rx51/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/omap3_beagle/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/omap3_pandora/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/omap4_panda/uboot.elf
+
+u-boot-omap: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-omap: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+=== DragonBoard 410c ===
+
+You can use fastboot (from the android-tools-fastboot package) to
+boot U-Boot or flash U-Boot on your DragonBoard 410c. Connect your
+PC via a USB cable to the micro-USB port on the DragonBoard. Hold
+the volume down (-) button (S4) and turn on the device to go into
+fastboot mode.
+
+You have two options: you can load U-Boot without flashing it (for
+example to test U-Boot) or you can flash it to the device.
+
+In order to load U-Boot without flashing it, run this command:
+
+ fastboot boot /usr/lib/u-boot/dragonboard410c/u-boot.img
+
+In order to flash U-Boot to the boot partition, run:
+
+ fastboot flash boot /usr/lib/u-boot/dragonboard410c/u-boot.img
+
+You have to reset your device after "fastboot flash boot" to start
+U-Boot.
+
+When U-Boot starts, it will try to boot from attached devices in
+the following order:
+
+* USB
+* External SD card
+* Internal SD card (eMMC)
+
+At the moment, there's no graphics support, so you will only see the
+U-Boot output if you have the optional serial console adapter.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets qcom
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-qcom [arm64]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/dragonboard410c/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-qcom [arm64]: statically-linked-binary usr/lib/u-boot/dragonboard410c/uboot.elf
+
+u-boot-qcom: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-qcom: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets rockchip "doc/README.rockchip"
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-rockchip [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/firefly-rk3288/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-rockchip [armhf]: statically-linked-binary usr/lib/u-boot/firefly-rk3288/uboot.elf
+
+u-boot-rockchip: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-rockchip: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+== Installation ==
+
+The raspberry pi targets can be installed by copying u-boot.bin to the
+FAT partition of the raspberry pi boot firmwware:
+
+ mkdir -p /boot/fat
+ mount /dev/mmcblk0p1 /boot/fat
+ cp -vb /usr/lib/u-boot/TARGET/u-boot.bin /boot/fat/
+
+Then specify the u-boot.bin as the kernel to load in config.txt on the
+FAT partition:
+
+ kernel u-boot.bin
+
+It should then support booting off of MMC and USB devices with serial
+console or HDMI with USB keyboard.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets rpi
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-rpi [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/rpi/uboot.elf
+u-boot-rpi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/rpi_2/uboot.elf
+u-boot-rpi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/rpi_3_32b/uboot.elf
+u-boot-rpi [arm64]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/rpi_3/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-rpi [armel]: statically-linked-binary usr/lib/u-boot/rpi/uboot.elf
+u-boot-rpi [armhf]: statically-linked-binary usr/lib/u-boot/rpi_2/uboot.elf
+u-boot-rpi [armhf]: statically-linked-binary usr/lib/u-boot/rpi_3_32b/uboot.elf
+u-boot-rpi [arm64]: statically-linked-binary usr/lib/u-boot/rpi_3/uboot.elf
+
+u-boot-rpi: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-rpi: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+Many sunxi boards (Bananapi, Cubieboard) can be written to SD directly:
+
+ dd if=/usr/lib/u-boot/BOARD/u-boot-sunxi-with-spl.bin of=/dev/mmcblkX bs=1024 seek=8
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets sunxi board/sunxi/README.pine64
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A10-OLinuXino-Lime/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A10s-OLinuXino-M/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-Olimex-SOM-EVB/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-OLinuXino-Lime/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-OLinuXino-Lime2/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-OLinuXino_MICRO/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Bananapi/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Bananapro/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/CHIP/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubieboard/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubieboard2/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubietruck/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubietruck_plus/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Lamobo_R1/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Linksprite_pcDuino/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Linksprite_pcDuino3/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Mini-X/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/orangepi_plus/uboot.elf
+u-boot-sunxi [arm64]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/pine64_plus/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A10-OLinuXino-Lime/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A10s-OLinuXino-M/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-Olimex-SOM-EVB/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-OLinuXino-Lime/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-OLinuXino-Lime2/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-OLinuXino_MICRO/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Bananapi/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Bananapro/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/CHIP/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubieboard/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubieboard2/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubietruck/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubietruck_plus/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Lamobo_R1/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Linksprite_pcDuino/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Linksprite_pcDuino3/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Mini-X/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/orangepi_plus/uboot.elf
+u-boot-sunxi [arm64]: statically-linked-binary usr/lib/u-boot/pine64_plus/uboot.elf
+
+u-boot-sunxi: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-sunxi: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself from a host
+system using the Linux_For_Tegra tools from NVIDIA's developer portal:
+https://developer.nvidia.com/embedded/linux-tegra-archive
+
+=== Jetson TK1 ===
+
+sudo ./flash.sh -L /usr/lib/u-boot/jetson-tk1/u-boot-dtb-tegra.bin jetson-tk1 mmcblk1p1
+
+Please note that L4T R19.3 is currently required (the image does not
+boot if flashed with L4T R21.1 through R21.4).
+
+=== Jetson TX1 ===
+
+sudo ./flash.sh -L /usr/lib/u-boot/p2371-2180/u-boot-dtb.bin jetson-tx1 mmcblk0p1
+
+=== TODO ===
+
+TODO: Figure out how to do this with tools within Debian,
+e.g. tegrarcm and cbootimage.
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets tegra
--- /dev/null
+#!/bin/sh
+
+case $DEB_HOST_GNU_TYPE in
+ aarch64-linux-gnu)
+ echo /usr/lib/u-boot/p2371-2180/uboot.elf /usr/lib/u-boot/p2371-2180/u-boot
+ ;;
+esac
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-tegra [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/jetson-tk1/uboot.elf
+u-boot-tegra [arm64]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/p2371-2180/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-tegra [armhf]: statically-linked-binary usr/lib/u-boot/jetson-tk1/uboot.elf
+u-boot-tegra [arm64]: statically-linked-binary usr/lib/u-boot/p2371-2180/uboot.elf
+
+u-boot-tegra: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-tegra: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+#!/bin/sh
+
+builddir=debian/build/tools
+for tool in dumpimage mkimage mkenvimage mksunxiboot kwboot env/fw_printenv ; do
+ echo ${builddir}/tools/${tool} /usr/bin/
+done
+
+echo doc/mkimage.1 /usr/share/man/man1/
+echo doc/kwboot.1 /usr/share/man/man1/
+
+# manpages
+echo debian/manpages/fw_printenv.8 /usr/share/man/man8/
+echo debian/manpages/fw_setenv.8 /usr/share/man/man8/
+
+# example env configs
+for env_config in debian/env-configs/*.config ; do
+ echo ${env_config} /usr/share/doc/u-boot-tools/examples/
+done
--- /dev/null
+/usr/bin/fw_printenv /usr/bin/fw_setenv
--- /dev/null
+# Synopsys is the name of a company, not a misspelling.
+u-boot-tools: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+Some examples using mtd-utils:
+
+SheevaPlug:
+
+ sudo flash_erase /dev/mtd0 0 0
+ sudo nandwrite -p /dev/mtd0 /usr/lib/u-boot/sheevaplug/u-boot.kwb
+
+GuruPlug:
+
+ sudo flash_erase /dev/mtd0 0 0
+ sudo nandwrite -p /dev/mtd0 /usr/lib/u-boot/guruplug/u-boot.kwb
+
+DreamPlug:
+
+ At this point you cannot write to the SPI/NOR flash from Linux,
+ so you will need to replace U-Boot from within U-Boot.
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
+
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets -
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/dockstar/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/dreamplug/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/guruplug/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/openrd_base/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/openrd_client/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/openrd_ultimate/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/sheevaplug/uboot.elf
+u-boot [avr32]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/hammerhead/uboot.elf
+u-boot [mips]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/qemu_mips/uboot.elf
+u-boot [sh4]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/r2dplus/uboot.elf
+u-boot [sh4]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/sh7785lcr_32bit/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/dockstar/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/dreamplug/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/guruplug/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/openrd_base/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/openrd_client/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/openrd_ultimate/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/sheevaplug/uboot.elf
+u-boot [avr32]: statically-linked-binary usr/lib/u-boot/hammerhead/uboot.elf
+u-boot [mips]: statically-linked-binary usr/lib/u-boot/qemu_mips/uboot.elf
+u-boot [sh4]: statically-linked-binary usr/lib/u-boot/r2dplus/uboot.elf
+u-boot [sh4]: statically-linked-binary usr/lib/u-boot/sh7785lcr_32bit/uboot.elf
+
+u-boot: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+version=3
+
+opts=pasv,repacksuffix=+dfsg1,uversionmangle=s/-rc/~rc/g,dversionmangle=s/\+dfsg.*//g,pgpsigurlmangle=s%$%.sig% \
+ftp://ftp.denx.de/pub/@PACKAGE@/@PACKAGE@@ANY_VERSION@@ARCHIVE_EXT@
projects / u-boot.git / commitdiff