* Ignore atomic-lock-free tests on armhf.
* Update ignoretest-armhf_03.patch for newer 1.15.1 behaviour.
* Tidy up some other patches to do with ignoring tests.
[dgit import unpatched rustc 1.15.1+dfsg1-1~exp3]
--- /dev/null
--- /dev/null
--- /dev/null
+++Shared libraries
+++================
+++
+++For now, the shared libraries of Rust are private.
+++The rational is the following:
+++ * Upstream prefers static linking for now
+++ - https://github.com/rust-lang/rust/issues/10209
+++ * rust is still under heavy development. As far as we know, there is
+++ no commitement from upstream to provide a stable ABI for now.
+++ Until we know more, we cannot take the chance to have Rust-built packages
+++ failing at each release of the compiler.
+++ * Static builds are working out of the box just fine
+++ * However, LD_LIBRARY_PATH has to be updated when -C prefer-dynamic is used
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org>, Fri, 13 Feb 2015 15:08:43 +0100
+++
+++Building from source
+++====================
+++
+++By default, the Debian rustc package will use the system rustc to bootstrap
+++itself from. The system rustc has to be either the previous or the same version
+++as the rustc being built; the build will fail if this is not the case.
+++
+++ apt-get source --compile rustc
+++
+++Alternatively, you may give the "pkg.rustc.dlstage0" DEB_BUILD_PROFILE to
+++instead use the process defined by Rust upstream. This downloads the "official"
+++stage0 compiler for the version being built from rust-lang.org. At the time of
+++writing "official" means "the previous stable version".
+++
+++ apt-get source --compile --build-profiles=pkg.rustc.dlstage0 rustc
+++
+++If neither of these options are acceptable to you, (e.g. because your build
+++process cannot access the network), see the below sections on "Bootstrapping"
+++for more options.
+++
+++Bootstrapping a new distro
+++==========================
+++
+++If you want to bootstrap a new distro that does not already have rustc, you
+++may run `debian/rules source_orig-dl` to create a .dsc that does not
+++Build-Depend on rustc. Instead, it includes an extra orig-dl source tarball
+++that contains the official stage0 compiler, pre-downloaded from rust-lang.org
+++so that your build daemons don't need to access the network during the build.
+++
+++ debian/rules source_orig-dl
+++ sbuild ../rustc_*.dsc
+++
+++To only bootstrap specific architectures, run this instead:
+++
+++ upstream_bootstrap_arch="arm64 armel armhf" debian/rules source_orig-dl
+++
+++This way, other architectures will be omitted from the orig-dl tarball. You
+++might want to do this e.g. if these other architectures are already present in
+++your distro, but the $upstream_bootstrap_arch ones are not yet present.
+++
+++Notes
+++-----
+++
+++The approach here is based on doing a *source-only upload*, where the building
+++of the binary packages are done by automatic build daemons. We achieve this, by
+++bundling the upstream bootstrapping binaries inside the Debian source package.
+++This is a nasty hack that stretches the definition of "source package", but is
+++unavoidable if we want to securely bootstrap self-hosted compilers.
+++
+++This differs from the traditional Debian way of bootstrapping compilers, which
+++involves locally building a "stage0" Debian package using upstream binaries
+++(instead of Debian build dependencies that don't yet exist), then using this
+++stage0 Debian package to do a "standard" build that then forms part of a binary
+++upload. This allows the source package to remain binary-free. However, both the
+++original stage0 package and upstream binaries are lost, and Debian currently
+++does not have any policy nor infrastructure that can try to reproduce what the
+++uploader supposedly did.
+++
+++The advantage of our (non-traditional) approach is that anyone can download
+++this source package if they want to build the binaries themselves - they can
+++just follow the same automatic build processes that apply to every other Debian
+++package. If the build process is reproducible [1] then they can be sure that
+++*you* (as the Debian Developer that prepared the source-only upload) didn't
+++backdoor the binaries, nor did the automatic build daemons even if they were
+++compromised during the build.
+++
+++(The upstream binaries contained in the orig-dl tarball may still have been
+++backdoored. However, this is true in both scenarios - our arrangement is still
+++a strict improvement in security, because it reduces the set of "things that
+++may have been backdoored". Furthermore, more people use the upstream binaries,
+++so presumably any backdoors would be noticed more quickly.)
+++
+++In the future, both approaches are unifiable into a single secure process, as
+++long as:
+++
+++1. We can trace the binaries that were *actually used* in the original
+++ bootstrapping event.
+++2. We can optionally *choose* to use a different bootstrapping binary, such as
+++ an independently-written rustc.
+++3. We have a unified well-defined process for both (1) or (2), that applies to
+++ all bootstrapped packages (not just rustc). "Well-defined" means that it can
+++ be automated by a program, and it can verify that both options result in the
+++ same binary outputs (after the stage2 compilation step).
+++
+++This is otherwise known as Diverse Double-Compilation.
+++
+++[1] https://github.com/rust-lang/rust/issues/34902
+++[2] http://www.dwheeler.com/trusting-trust/
+++
+++Bootstrapping a new architecture
+++================================
+++
+++Compiling from upstream releases
+++--------------------------------
+++
+++See the previous section, "Bootstrapping a new distro", specifically the part
+++about how to "only bootstrap specific architectures".
+++
+++For Debian, we should be able to support armhf soon:
+++
+++Complete: armhf https://github.com/rust-lang/rust/issues/35590
+++In-progress: ppc64, ppc64el, s390x: https://github.com/rust-lang/rust/issues/36006
+++In-progress: mips, mipsel, mips64el: https://github.com/rust-lang/rust/issues/36015
+++
+++Cross-compiling from Debian packages
+++------------------------------------
+++
+++WARNING: This does not work yet
+++
+++0. Start with rust installed on an existing platform
+++
+++1. Build a rust cross-compiler targeting new architecture
+++
+++ sudo apt-get build-dep --build-profile=nodoc rustc
+++ dpkg-buildpackage -t $new_arch
+++
+++2. Use cross-compiler to build a compiler that runs on new architecture
+++
+++ dpkg --add-architecture $new_arch
+++ sudo apt-get build-dep --host-architecture=$new_arch rustc
+++ dpkg-buildpackage -a $new_arch
+++
+++ # Perhaps this is sufficient ??
+++ #apt-get source --compile --host-architecture=$new_arch rustc
+++
+++ -- Angus Lees <gus@debian.org>, Sun, 1 Feb 2015 16:16:44 +1100
--- /dev/null
--- /dev/null
--- /dev/null
+++Document by Luca Bruno & Sylvestre Ledru
+++
+++This source package is unfortunately quite tricky and with
+++several cutting edges, due to the complexity of rust-lang
+++bootstrapping system and the high rate of language changes
+++still ongoing.
+++
+++We try to describe here inner packaging details and the
+++reasons behind them.
+++
+++
+++Embedded libraries
+++==================
+++
+++This source package embeds several external libraries (foeked and managed
+++by rust upstream as git submodules).
+++In early stages, many more libraries were forked/emebedded but we are steadily
+++progressing in splitting them out.
+++
+++Here below the remaining ones, with the technical reasons.
+++
+++ * jemalloc from https://github.com/rust-lang/jemalloc
+++ -> system-wide one can't be used due to rust using a "je_" prefix.
+++
+++ This is intentional upstream design and won't change soon, see:
+++ - https://github.com/rust-lang/rust/pull/18678
+++ - http://smallcultfollowing.com/babysteps/blog/2014/11/14/allocators-in-rust/
+++
+++ * compiler-rt from https://github.com/rust-lang/compiler-rt
+++ -> system-wide compiler-rt fails during linkage
+++
+++ Bug reported upstream, still to be fixed, see:
+++ - https://github.com/rust-lang/rust/issues/15054
+++ - https://github.com/rust-lang/rust/issues/15708
+++
+++As a summary, we plan to:
+++ * keep embedding jemalloc (probably forever)
+++ * work with upstream to fix compiler-rt linkage soon.
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 27 Mar 2015 14:27:12 +0100
+++
--- /dev/null
--- /dev/null
--- /dev/null
+++Later:
+++
+++ * Try to investigate the 1 hour vs 7 hour build time difference we saw between
+++ git diff debian/1.13.0+dfsg1-2..debian/1.14.0+dfsg1-1 -- debian
+++
+++<eddyb> infinity0: LLVM [in Rust]?
+++<eddyb> infinity0: ./configure --enable-debug has this annoying detail that nobody has fixed yet, that it disabled optimizations
+++<eddyb> so you always have to add --enable-optimize or something like that to counteract the negative effect
+++<eddyb> unoptimized rustc is *very* slow, in fact it's my sole guess for 7 hours, assuming you didn't just simply lose 8x parallelism or something
+++
+++<eddyb> infinity0: -Z time-passes between two different compilers, on the same test, would also be pretty revealing
+++<eddyb> infinity0: also try timing the entire compile-fail test run between stage1/bin/rustc and stage2/bin/rustc (the latter is what running tests uses by default)
+++<eddyb> infinity0: in the old thing [pre-rustbuild makefiles] it's... make check-stage1-cfail, I think
+++
+++Older backlog:
+++
+++ * Use Compiler-rt package
+++ * Improve the bootstrap (do the local build first on our systems, upload
+++ to Debian and use the packages)
+++ * Port on other archs
+++ * Create a runtime package (rust-runtime)
+++ * Move the runtime library into a public directory
+++ * Package the various editors plugins (emacs, kate & vim)
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 20 Jan 2015 08:50:28 +0100
--- /dev/null
--- /dev/null
--- /dev/null
+++# Used for testing architecture.mk, and for make_orig-dl_tarball.sh.
+++# Not for end users.
+++#
+++# Usage:
+++# $ make -s --no-print-directory -f debian/architecture-test.mk rust-for-deb_arm64
+++# arm64 aarch64-unknown-linux-gnu
+++
+++include debian/architecture.mk
+++
+++deb_arch_setvars = $(foreach var,ARCH ARCH_OS ARCH_CPU ARCH_BITS ARCH_ENDIAN GNU_CPU GNU_SYSTEM GNU_TYPE MULTIARCH,\
+++ $(eval DEB_$(1)_$(var) = $(shell dpkg-architecture -a$(1) -qDEB_HOST_$(var) 2>/dev/null)))
+++
+++rust-for-deb_%:
+++ $(eval $(call deb_arch_setvars,$*))
+++ $(eval $(call rust_type_setvar,DEB_$*))
+++ @echo $(DEB_$(*)_ARCH) $(DEB_$(*)_RUST_TYPE)
--- /dev/null
--- /dev/null
--- /dev/null
+++# This Makefile snippet defines DEB_*_RUST_TYPE triples based on DEB_*_GNU_TYPE
+++
+++include /usr/share/dpkg/architecture.mk
+++
+++rust_cpu = $(subst i586,i686,$(if $(findstring -armhf-,-$(2)-),$(subst arm,armv7,$(1)),$(1)))
+++rust_type_setvar = $(1)_RUST_TYPE ?= $(call rust_cpu,$($(1)_GNU_CPU),$($(1)_ARCH))-unknown-$($(1)_GNU_SYSTEM)
+++
+++$(foreach machine,BUILD HOST TARGET,\
+++ $(eval $(call rust_type_setvar,DEB_$(machine))))
+++
+++# fallback for older dpkg versions
+++ifeq ($(DEB_TARGET_RUST_TYPE),-unknown-)
+++ DEB_TARGET_RUST_TYPE = $(DEB_HOST_RUST_TYPE)
+++endif
--- /dev/null
--- /dev/null
--- /dev/null
+++#!/bin/sh
+++# TODO(infinity0): this can be removed when antlr4 provide this as a convenience script
+++# See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=814253 for details.
+++# Don't forget to update override_dh_auto_configure when you remove it.
+++exec java -cp /usr/share/java/antlr4.jar:/usr/share/java/antlr4-runtime.jar org.antlr.v4.gui.TestRig "$@"
--- /dev/null
--- /dev/null
--- /dev/null
+++#!/bin/sh
+++# Build a Debian source package out of an existing unpacked rustc deb source,
+++# and the official rust preview releases.
+++#
+++# infinity0 occasionally makes, builds and uploads them here:
+++# https://launchpad.net/~infinity0/+archive/ubuntu/rust-nightly
+++# https://launchpad.net/~infinity0/+archive/ubuntu/rust-beta
+++
+++# You can set these env vars to tweak the behaviour of this script.
+++CHANNEL="${CHANNEL:-beta}" # either beta or nightly
+++DIST="${DIST:-experimental}" # which suite to put in debian/changelog
+++DEBDIR="${DEBDIR:-}" # where is the debian/ directory? defaults to this script
+++NOREMOTE="${NOREMOTE:-false}" # e.g. if you have already downloaded all necessary files
+++# note that we already use "wget -N" to avoid redundant downloads
+++NOCLOBBER="${NOCLOBBER:-true}" # don't rebuild if we already have the .dsc
+++DPUT_HOST="${DPUT_HOST}" # optional host dput the resulting .dsc to
+++ARCHES="amd64 arm64 i386"
+++
+++do_temporary_fixups() {
+++# patches needed to subsequent versions go here
+++local verprefix="${1%.0-beta.?}"
+++verprefix="${verprefix%.0-nightly}"
+++( cd debian/patches
+++local f
+++for f in *; do
+++ fb="${f%.patch}"
+++ fb="${fb%.diff}"
+++ # if an updated patch exists, use it
+++ if test -f "${fb}_${verprefix}"*; then mv "${fb}_${verprefix}"* "$f"; fi
+++done )
+++case "$1" in
+++"1.14."*|"1.15."*)
+++ dquilt delete ignore-stdcall-test-on-arm64.patch
+++ ;;
+++esac
+++}
+++
+++abort() { local x="$1"; shift; echo >&2 "$@"; exit "$x"; }
+++
+++dquilt() {
+++ QUILT_PATCHES="debian/patches" \
+++ QUILT_PATCH_OPTS="--reject-format=unified" \
+++ QUILT_DIFF_ARGS="-p ab --no-timestamps --no-index --color=auto" \
+++ QUILT_REFRESH_ARGS="-p ab --no-timestamps --no-index" \
+++ quilt "$@"
+++}
+++
+++HOST="https://static.rust-lang.org"
+++BASENAME="rustc-$CHANNEL-src.tar.gz"
+++JQUERY="https://code.jquery.com/jquery-2.1.4.js"
+++
+++SCRIPTDIR="$(dirname "$0")"
+++DEBDIR="$(readlink -f ${DEBDIR:-$SCRIPTDIR})"
+++echo "using DEBDIR=$DEBDIR as debian tree to copy into upstream tarball"
+++test "$PWD" = "${PWD#$DEBDIR}" || abort 1 "must run from outside DEBDIR"
+++test -d "$DEBDIR" || abort 1 "DEBDIR not a directory: $DEBDIR"
+++
+++set -x
+++set -e
+++
+++$NOREMOTE || wget -N "$HOST/dist/$BASENAME"
+++$NOREMOTE || wget -N "$HOST/dist/$BASENAME.asc"
+++$NOREMOTE || gpg2 -v "$BASENAME.asc"
+++$NOREMOTE || wget -N "$HOST/dist/index.txt"
+++MODDATE1="$(grep "^/dist/$BASENAME," index.txt \
+++ | cut -d, -f3 | sed -e 's/\(.*\)-\(.*\)-\(.*\)T.*/\1\2\3/')"
+++MODDATE2="$(TZ=UTC stat "$BASENAME" -c %y | sed -e 's/\(.*\)-\(.*\)-\([0-9]*\) .*$/\1\2\3/')"
+++$NOREMOTE || test "$MODDATE1" = "$MODDATE2" || abort 2 "file mod times don't match, try again"
+++$NOREMOTE || wget -N "$JQUERY"
+++
+++rm -rf "rustc-$CHANNEL"
+++tar xf "$BASENAME"
+++
+++cd "rustc-$CHANNEL"
+++{
+++ echo "CFG_RELEASE_CHANNEL=$CHANNEL"
+++ echo "CFG_HASH_COMMAND=md5sum | cut -c1-8"
+++ sed -n -e '/^CFG_RELEASE/,/^##/{/^CFG_INFO/d;p}' mk/main.mk
+++ echo "all:"
+++ echo " @echo export CFG_RELEASE=\$(CFG_RELEASE)"
+++} | make -f - > ./envvars
+++. ./envvars
+++NEWUPSTR="$(echo "$CFG_RELEASE.$MODDATE2+dfsg1" | sed -e 's/-beta/~beta/' -e 's/-nightly/~~nightly/')"
+++if $NOCLOBBER && test -f "../rustc_$NEWUPSTR-1.dsc"; then
+++ cd ..
+++ rm -rf "rustc-$CHANNEL"
+++ abort 0 "already have rustc_$NEWUPSTR-1.dsc; set NOCLOBBER=false if you want to force"
+++fi
+++cp -a "$DEBDIR" .
+++mk-origtargz --repack --compression xz -v "$NEWUPSTR" "../$BASENAME"
+++cd ..
+++
+++rm -rf "rustc-$CHANNEL" "rustc-$NEWUPSTR"
+++tar xf "rustc_$NEWUPSTR.orig.tar.xz"
+++mv "rustc-$CHANNEL" "rustc-$NEWUPSTR"
+++
+++libstd_ver() {
+++ dpkg-parsechangelog --show-field Version | sed -re 's/([^.]+)\.([^.]+)\..*/\1.\2/'
+++}
+++
+++cd "rustc-$NEWUPSTR"
+++cp -a "$DEBDIR" .
+++
+++OLD_LIBVER="$(libstd_ver)"
+++dch -D "$DIST" -v "$NEWUPSTR-1" "Team upload."
+++dch -a "Switch to $CHANNEL channel."
+++NEW_LIBVER="$(libstd_ver)"
+++do_temporary_fixups "$CFG_RELEASE"
+++mkdir -p ../"dl_${CFG_RELEASE}"
+++ln -sf ../"dl_${CFG_RELEASE}" dl
+++# TODO: don't do this if orig-dl already exists
+++$NOREMOTE || upstream_bootstrap_arch="$ARCHES" debian/rules source_orig-dl
+++rm -f dl
+++cp -al ../"dl_${CFG_RELEASE}" dl
+++# set build-dep arch exceptions
+++deb_bd_arch_ex="$(echo "$ARCHES" | sed -e 's/\S*/!\0/g')"
+++sed -e 's/rustc (\(.*\))\( *\[\(.*\)\]\)\?/rustc (\1) ['"$deb_bd_arch_ex"']/g' -i debian/control
+++
+++rm -f debian/missing-sources/jquery-*
+++cp "../$(basename "$JQUERY")" debian/missing-sources
+++sed -i -e "s/$OLD_LIBVER/$NEW_LIBVER/" "debian/control"
+++sed -i -e 's/\(RELEASE_CHANNEL := \)\(.*\)/\1'"$CHANNEL"'/g' debian/rules
+++sed -i -e 's/^update .*/update '"$OLD_LIBVER $NEW_LIBVER"'/' debian/update-version.sh
+++( cd debian && bash ./update-version.sh )
+++
+++while dquilt push; do dquilt refresh; done
+++dquilt pop -a
+++rm -rf .pc
+++dpkg-buildpackage -d -S
+++cd ..
+++
+++if test -n "$DPUT_HOST"; then
+++ dput "$DPUT_HOST" "rustc_$NEWUPSTR-1_source.changes"
+++else
+++ set +x
+++ echo "Source package built, but there is NO GUARANTEE THAT IT WORKS!"
+++ echo "You should now try to build it with \`sudo cowbuilder --build rustc_$NEWUPSTR-1.dsc\`"
+++fi
--- /dev/null
--- /dev/null
--- /dev/null
+++rustc (1.15.1+dfsg1-1~exp3) experimental; urgency=medium
+++
+++ * Ignore atomic-lock-free tests on armhf.
+++ * Update ignoretest-armhf_03.patch for newer 1.15.1 behaviour.
+++ * Tidy up some other patches to do with ignoring tests.
+++
+++ -- Ximin Luo <infinity0@debian.org> Sun, 12 Mar 2017 04:15:33 +0100
+++
+++rustc (1.15.1+dfsg1-1~exp2) experimental; urgency=medium
+++
+++ * Update armhf ignoretest patch.
+++ * Bootstrap armhf. (Closes: #809316, #834003)
+++ * Bootstrap ppc4el. (Closes: #839643)
+++ * Fix rust-lldb symlink. (Closes: #850639)
+++
+++ -- Ximin Luo <infinity0@debian.org> Thu, 02 Mar 2017 23:01:26 +0100
+++
+++rustc (1.15.1+dfsg1-1~exp1) experimental; urgency=medium
+++
+++ * New upstream release (won't probably be in stretch).
+++ see the 1.4 git branch for the follow up for stable
+++ * Call to the test renamed from check-notidy => check
+++ * d/p/u-destdir-support.diff: Apply upstream patch to support
+++ destdir in the make install (for rustbuild, in later versions)
+++ * Overrides the 'binary-or-shlib-defines-rpath' lintian warnings.
+++ We need them for now
+++ * Refresh of the patches
+++
+++ [ Sven Joachim ]
+++ * Drop Pre-Depends on multiarch-support. (Closes: #856109)
+++
+++ [ Erwan Prioul ]
+++ * Fix test and build failures for ppc64el. (Closes: #839643)
+++
+++ [ Ximin Luo ]
+++ * Disable rustbuild for the time being (as it was in 1.14) and instead
+++ bootstrap two new arches, armhf and ppc64el.
+++ * Switch back to debhelper 9 to make backporting easier.
+++ * Switch Build-Depends on binutils-multiarch back to binutils, the former is
+++ no longer needed by the upstream tests.
+++
+++ [ Matthias Klose ]
+++ * Compatibility fixes and improvements to help work better on Ubuntu.
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 26 Feb 2017 21:12:27 +0100
+++
+++rustc (1.14.0+dfsg1-3) unstable; urgency=medium
+++
+++ * Fix mips64 Makefile patches.
+++ * Don't run arch-dep tests in a arch-indep build.
+++
+++ -- Ximin Luo <infinity0@debian.org> Wed, 04 Jan 2017 21:34:56 +0100
+++
+++rustc (1.14.0+dfsg1-2) unstable; urgency=medium
+++
+++ * Update README.Debian, the old one was way out of date.
+++ * Detect mips CPUs in ./configure and fill in mips Makefile rules.
+++ * Work around jemalloc-related problems in the upstream bootstrapping
+++ binaries for arm64, ppc64el, s390x.
+++ * Disable jemalloc on s390x - upstream already disable it for some other
+++ arches.
+++ * Disable jemalloc tests for arches where jemalloc is disabled.
+++ * We still expect the following failures:
+++ * arm64 should be fixed (i.e. no failures) compared to the previous upload.
+++ * armhf will FTBFS due to 'Illegal instruction' and this can only be fixed
+++ with the next stable rustc release.
+++ * mips mipsel mips64el ppc64 ppc64el s390x will FTBFS due to yet other
+++ test failures beyond the ones I fixed above; this upload is only to save
+++ me manual work in producing nice reports that exhibit these failures.
+++
+++ -- Ximin Luo <infinity0@debian.org> Thu, 29 Dec 2016 23:00:47 +0100
+++
+++rustc (1.14.0+dfsg1-1) unstable; urgency=medium
+++
+++ [ Sylvestre Ledru ]
+++ * New upstream release
+++ * Update debian/watch
+++
+++ [ Ximin Luo ]
+++ * Try to bootstrap armhf ppc64 ppc64el s390x mips mipsel mips64el.
+++ (Closes: #809316, #834003, #839643)
+++ * Make rust-gdb and rust-lldb arch:all packages.
+++ * Switch to debhelper 10.
+++
+++ -- Ximin Luo <infinity0@debian.org> Sat, 24 Dec 2016 18:03:03 +0100
+++
+++rustc (1.13.0+dfsg1-2) unstable; urgency=high
+++
+++ * Skip macro-stepping test on arm64, until
+++ https://github.com/rust-lang/rust/issues/37225 is resolved.
+++
+++ -- Luca Bruno <lucab@debian.org> Sat, 26 Nov 2016 23:40:14 +0000
+++
+++rustc (1.13.0+dfsg1-1) unstable; urgency=medium
+++
+++ [ Sylvestre Ledru ]
+++ * New upstream release.
+++
+++ [ Ximin Luo ]
+++ * Use Debian system jquery instead of upstream's embedded copy.
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 11 Nov 2016 13:35:23 +0100
+++
+++rustc (1.12.1+dfsg1-1) unstable; urgency=medium
+++
+++ [ Sylvestre Ledru ]
+++ * New (minor) upstream release
+++ * Missing dependency from rust-lldb to python-lldb-3.8 (Closes: #841833)
+++ * Switch to llvm 3.9. (Closes: #841834)
+++
+++ [ Ximin Luo ]
+++ * Dynamically apply rust-boot-1.12.1-from-1.12.0.diff.
+++ This allows us to bootstrap from either 1.11.0 or 1.12.0.
+++ * Bump LLVM Build-Depends version to get the backported patches for LLVM
+++ #30402 and #29163.
+++ * Install debugger_pretty_printers_common to rust-gdb and rust-lldb.
+++ (Closes: #841835)
+++
+++ -- Ximin Luo <infinity0@debian.org> Mon, 07 Nov 2016 14:15:14 +0100
+++
+++rustc (1.12.0+dfsg1-2) unstable; urgency=medium
+++
+++ * Ignore test run-make/no-duplicate-libs. Fails on i386
+++ * Ignore test run-pass-valgrind/down-with-thread-dtors.rs . Fails on arm64
+++ * I am not switching to llvm 3.9 now because a test freezes. The plan is
+++ to silent the warning breaking the build and upload 1.12.1 after
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 05 Oct 2016 10:48:01 +0200
+++
+++rustc (1.12.0+dfsg1-1) unstable; urgency=medium
+++
+++ * new upstream release
+++ - Rebase of the patches and removal of deprecated patches
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 29 Sep 2016 20:45:04 +0200
+++
+++rustc (1.11.0+dfsg1-3) unstable; urgency=medium
+++
+++ * Fix separate build-arch and build-indep builds.
+++
+++ -- Ximin Luo <infinity0@debian.org> Tue, 13 Sep 2016 12:30:41 +0200
+++
+++rustc (1.11.0+dfsg1-2) unstable; urgency=medium
+++
+++ * Fix rebuilding against the current version, by backporting a patch I wrote
+++ that was already applied upstream. Should fix the FTBFS that was observed
+++ by tests.reproducible-builds.org.
+++ * Ignore a failing stdcall test on arm64; should fix the FTBFS there.
+++ * Backport a doctest fix I wrote, already applied upstream.
+++
+++ -- Ximin Luo <infinity0@debian.org> Mon, 12 Sep 2016 17:40:12 +0200
+++
+++rustc (1.11.0+dfsg1-1) unstable; urgency=medium
+++
+++ * New upstream release
+++ * Add versioned binutils dependency. (Closes: #819475, #823540)
+++
+++ -- Ximin Luo <infinity0@debian.org> Wed, 07 Sep 2016 10:31:57 +0200
+++
+++rustc (1.10.0+dfsg1-3) unstable; urgency=medium
+++
+++ * Rebuild with LLVM 3.8, same as what upstream are using
+++ * Dynamically link against LLVM. (Closes: #832565)
+++
+++ -- Ximin Luo <infinity0@debian.org> Sat, 30 Jul 2016 22:36:41 +0200
+++
+++rustc (1.10.0+dfsg1-2) unstable; urgency=medium
+++
+++ * Tentatively support ARM architectures
+++ * Include upstream arm64,armel,armhf stage0 compilers (i.e. 1.9.0 stable)
+++ in a orig-dl tarball, like how we previously did for amd64,i386.
+++
+++ -- Ximin Luo <infinity0@debian.org> Fri, 22 Jul 2016 15:54:51 +0200
+++
+++rustc (1.10.0+dfsg1-1) unstable; urgency=medium
+++
+++ * New upstream release
+++ * Add myself to uploaders
+++ * Update our build process to bootstrap from the previous Debian rustc stable
+++ version by default. See README.Debian for other options.
+++ * Update to latest Standards-Version; no changes required.
+++
+++ -- Ximin Luo <infinity0@debian.org> Sun, 17 Jul 2016 03:40:49 +0200
+++
+++rustc (1.9.0+dfsg1-1) unstable; urgency=medium
+++
+++ * New upstream release (Closes: #825752)
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 29 May 2016 17:57:38 +0200
+++
+++rustc (1.8.0+dfsg1-1) unstable; urgency=medium
+++
+++ * New upstream release
+++
+++ [ Ximin Luo ]
+++ * Fix using XZ for the orig tarball: needs explicit --repack in debian/watch
+++ * Drop wno-error patch; applied upstream.
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 15 Apr 2016 12:01:45 +0200
+++
+++rustc (1.7.0+dfsg1-1) unstable; urgency=medium
+++
+++ * New upstream release
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 03 Mar 2016 22:41:24 +0100
+++
+++rustc (1.6.0+dfsg1-3) unstable; urgency=medium
+++
+++ * Apply upstream fix to silent a valgrind issue in the test suite
+++ (Closes: ##812825)
+++ * Add gcc & libc-dev as dependency of rustc to make sure it works
+++ out of the box
+++
+++ [ Ximin Luo ]
+++ * Work around rust bug https://github.com/rust-lang/rust/issues/31529
+++ * Enable optional tests, and add verbosity/backtraces to tests
+++ * Use XZ instead of GZ compression (will apply to the next new upload)
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 02 Feb 2016 15:08:11 +0100
+++
+++rustc (1.6.0+dfsg1-2) unstable; urgency=medium
+++
+++ * mk/rt.mk: Modify upstream code to append -Wno-error rather than trying
+++ to remove the string "-Werror". (Closes: #812448)
+++ * Disable new gcc-6 "-Wmisleading-indentation" warning, which triggers
+++ (incorrectly) on src/rt/miniz.c. (Closes: #811573)
+++ * Guard arch-dependent dh_install commands appropriately, fixing
+++ arch-indep-only builds. (Closes: #809124)
+++
+++ -- Angus Lees <gus@debian.org> Tue, 26 Jan 2016 05:40:14 +1100
+++
+++rustc (1.6.0+dfsg1-1) unstable; urgency=medium
+++
+++ * new upstream release
+++
+++ [ Ximin Luo ]
+++ * Use secure links for Vcs-* fields.
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 22 Jan 2016 10:56:08 +0100
+++
+++rustc (1.5.0+dfsg1-1) unstable; urgency=medium
+++
+++ * New upstream release
+++ - We believe that we should let rust transit to testing
+++ (Closes: #786836)
+++ * Move away from hash to the same rust naming schema
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 10 Dec 2015 17:23:32 +0100
+++
+++rustc (1.4.0+dfsg1-1) unstable; urgency=medium
+++
+++ * New upstream release
+++ 198068b3 => 1bf6e69c
+++ * Update the download url in debian/watch
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 30 Oct 2015 09:36:02 +0100
+++
+++rustc (1.3.0+dfsg1-1) unstable; urgency=medium
+++
+++ * New upstream release
+++ 62abc69f => 198068b3
+++ * jquery updated from 2.1.0 to 2.1.4
+++
+++ [ Ximin Luo ]
+++ * Use LLVM 3.7 as upstream does, now that it's released. (Closes: #797626)
+++ * Fix debian/copyright syntax mistakes.
+++ * Don't Replace/Break previous versions of libstd-rust-*
+++ * Check that the libstd-rust-* name in d/control matches upstream.
+++ * Several other minor build tweaks.
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 19 Sep 2015 14:39:35 +0200
+++
+++rustc (1.2.0+dfsg1-1) unstable; urgency=medium
+++
+++ * New upstream release
+++ libstd-rust-7d23ff90 => libstd-rust-62abc69f
+++ * Add llvm-3.6-tools to the build dep as it is
+++ now needed for tests
+++ * Fix the Vcs-Browser value
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 08 Aug 2015 23:13:44 +0200
+++
+++rustc (1.1.0+dfsg1-3) unstable; urgency=medium
+++
+++ * rust-{gdb,lldb} now Replaces pre-split rustc package.
+++ Closes: #793433.
+++ * Several minor lintian cleanups.
+++
+++ -- Angus Lees <gus@debian.org> Fri, 24 Jul 2015 17:47:48 +1000
+++
+++rustc (1.1.0+dfsg1-2) unstable; urgency=medium
+++
+++ [ Angus Lees ]
+++ * Replace remote Rust logo with local file in HTML docs.
+++ * Symlink rust-{gdb,lldb}.1 to {gdb,lldb}.1 manpages.
+++ Note that gdb.1 requires the gdb-doc package, and that lldb.1 doesn't
+++ exist yet (see #792908).
+++ * Restore "Architecture: amd64 i386" filter, mistakenly removed in
+++ previous version. Unfortunately the toolchain bootstrap isn't ready
+++ to support all Debian archs yet. Closes: #793147.
+++
+++ -- Angus Lees <gus@debian.org> Wed, 22 Jul 2015 09:51:08 +1000
+++
+++rustc (1.1.0+dfsg1-1) unstable; urgency=low
+++
+++ [ Angus Lees ]
+++ * Set SONAME when building dylibs
+++ * Split out libstd-rust, libstd-rust-dev, rust-gdb, rust-lldb from rustc
+++ - libs are now installed into multiarch-friendly locations
+++ - rpath is no longer required to use dylibs (but talk to Debian Rust
+++ maintainers before building a package that depends on the dylibs)
+++ * Install /usr/share/rustc/architecture.mk, which declares Rust arch
+++ triples for Debian archs and is intended to help future Rust packaging
+++ efforts. Warning: it may not be complete/accurate yet.
+++ * New upstream release (1.1)
+++
+++ -- Angus Lees <gus@debian.org> Thu, 16 Jul 2015 14:23:47 +1000
+++
+++rustc (1.0.0+dfsg1-1) unstable; urgency=medium
+++
+++ [ Angus Lees ]
+++ * New upstream release (1.0!)
+++
+++ [ Sylvestre Ledru ]
+++ * Fix the watch file
+++ * Update of the repack to remove llvm sources
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 16 May 2015 08:24:32 +1000
+++
+++rustc (1.0.0~beta.4-1~exp1) experimental; urgency=low
+++
+++ [ Angus Lees ]
+++ * New upstream release (beta 3)
+++ - Drop manpage patch - now included upstream
+++ * Replace duplicated compile-time dylibs with symlinks to run-time libs
+++ (reduces installed size by ~68MB)
+++
+++ [ Sylvestre Ledru ]
+++ * New upstream release (beta 4)
+++ * Replace two more occurrences of jquery by the package
+++ * Repack upstream to remove an LLVM file with a non-DFSG license
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 06 May 2015 11:14:30 +0200
+++
+++rustc (1.0.0~alpha.2-1~exp1) experimental; urgency=low
+++
+++ [ Angus Lees ]
+++ * Patch upstream manpages to address minor troff issues
+++ * Make 'debian/rules clean' also clean LLVM source
+++ * Rename primary 'rust' binary package to 'rustc'
+++ * Fix potential FTBFS: rust-doc requires texlive-fonts-recommended (for
+++ pzdr.tfm)
+++ * Build against system LLVM
+++
+++ [ Sylvestre Ledru ]
+++ * New testing release
+++ * Renaming of the source package
+++ * Set a minimal version for dpkg-dev and debhelper (for profiles)
+++ * For now, disable build profiles as they are not supported in Debian
+++ * Introduce some changes by Angus Lees
+++ - Introduction of build stages
+++ - Disable the parallel execution of tests
+++ - Improving of the parallel syntax
+++ - Use override_dh_auto_build-arch
+++ - Use override_dh_auto_build-indep
+++ - Better declarations of the doc
+++ - Update of the description
+++ - Watch file updated (with key check)
+++
+++ [ Luca Bruno ]
+++ * rules: respect 'nocheck' DEB_BUILD_OPTIONS
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 07 Mar 2015 09:25:47 +0100
+++
+++rust (1.0.0~alpha-0~exp1) experimental; urgency=low
+++
+++ * Initial package (Closes: #689207)
+++ Work done by Luca Bruno, Jordan Justen and Sylvestre Ledru
+++
+++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 23 Jan 2015 15:47:37 +0100
--- /dev/null
--- /dev/null
--- /dev/null
+++9
--- /dev/null
--- /dev/null
--- /dev/null
+++Source: rustc
+++Section: devel
+++Priority: extra
+++Maintainer: Rust Maintainers <pkg-rust-maintainers@lists.alioth.debian.org>
+++Uploaders: Jordan Justen <jordan.l.justen@intel.com>,
+++ Luca Bruno <lucab@debian.org>,
+++ Sylvestre Ledru <sylvestre@debian.org>,
+++ Angus Lees <gus@debian.org>,
+++ Ximin Luo <infinity0@debian.org>
+++Build-Depends: debhelper (>= 9),
+++ dpkg-dev (>= 1.17.14),
+++ rustc (>= 1.14.0+dfsg) [!armhf !ppc64el] <!pkg.rustc.dlstage0>,
+++ rustc (<= 1.15.1++) [!armhf !ppc64el] <!pkg.rustc.dlstage0>,
+++ autotools-dev,
+++ binutils,
+++ cmake,
+++ curl,
+++ gperf,
+++ libedit-dev,
+++ llvm-3.9-dev (>= 1:3.9-5),
+++ llvm-3.9-tools (>= 1:3.9-5),
+++ python,
+++ zlib1g-dev,
+++ nodejs <!nocheck>,
+++ valgrind <!nocheck>,
+++ git <!nocheck>,
+++ procps <!nocheck>,
+++# the tests require the docs to be built, which requires jquery
+++ libjs-jquery <!nocheck>,
+++# below are optional tools even for 'make check'
+++ antlr4 <!nocheck> | antlr <!nocheck>,
+++ bison <!nocheck>,
+++ flex <!nocheck>,
+++# TODO: broken; see https://github.com/rust-lang/rust/issues/39838; re-enable when that is fixed
+++# gdb <!nocheck>,
+++ default-jdk-headless <!nocheck> | default-jdk <!nocheck>,
+++Build-Depends-Indep: libjs-jquery <!nodoc>,
+++ pandoc (>= 1.9),
+++ po4a,
+++ texlive-xetex,
+++ texlive-latex-base,
+++ texlive-generic-recommended,
+++ texlive-fonts-recommended,
+++ lmodern
+++Standards-Version: 3.9.8
+++Homepage: http://www.rust-lang.org/
+++Vcs-Git: https://anonscm.debian.org/git/pkg-rust/rust.git
+++Vcs-Browser: https://anonscm.debian.org/cgit/pkg-rust/rust.git
+++
+++Package: rustc
+++Architecture: any
+++Multi-Arch: foreign
+++Pre-Depends: ${misc:Pre-Depends}
+++Depends: ${shlibs:Depends}, ${misc:Depends}, libstd-rust-dev (= ${binary:Version}),
+++ gcc, libc-dev, libjs-jquery, binutils (>= 2.26)
+++Recommends: rust-gdb | rust-lldb
+++Suggests: rust-doc
+++Description: Rust systems programming language
+++ Rust is a curly-brace, block-structured expression language. It
+++ visually resembles the C language family, but differs significantly
+++ in syntactic and semantic details. Its design is oriented toward
+++ concerns of "programming in the large", that is, of creating and
+++ maintaining boundaries - both abstract and operational - that
+++ preserve large-system integrity, availability and concurrency.
+++ .
+++ It supports a mixture of imperative procedural, concurrent actor,
+++ object-oriented and pure functional styles. Rust also supports
+++ generic programming and meta-programming, in both static and dynamic
+++ styles.
+++
+++Package: libstd-rust-1.15
+++Section: libs
+++Architecture: any
+++Multi-Arch: same
+++Pre-Depends: ${misc:Pre-Depends}
+++Depends: ${shlibs:Depends}, ${misc:Depends}
+++Description: Rust standard libraries
+++ Rust is a curly-brace, block-structured expression language. It
+++ visually resembles the C language family, but differs significantly
+++ in syntactic and semantic details. Its design is oriented toward
+++ concerns of "programming in the large", that is, of creating and
+++ maintaining boundaries - both abstract and operational - that
+++ preserve large-system integrity, availability and concurrency.
+++ .
+++ It supports a mixture of imperative procedural, concurrent actor,
+++ object-oriented and pure functional styles. Rust also supports
+++ generic programming and meta-programming, in both static and dynamic
+++ styles.
+++ .
+++ This package contains the standard Rust libraries, built as dylibs.
+++
+++Package: libstd-rust-dev
+++Section: libdevel
+++Architecture: any
+++Multi-Arch: same
+++Depends: ${misc:Depends}, libstd-rust-1.15 (= ${binary:Version})
+++Description: Rust standard libraries - development files
+++ Rust is a curly-brace, block-structured expression language. It
+++ visually resembles the C language family, but differs significantly
+++ in syntactic and semantic details. Its design is oriented toward
+++ concerns of "programming in the large", that is, of creating and
+++ maintaining boundaries - both abstract and operational - that
+++ preserve large-system integrity, availability and concurrency.
+++ .
+++ It supports a mixture of imperative procedural, concurrent actor,
+++ object-oriented and pure functional styles. Rust also supports
+++ generic programming and meta-programming, in both static and dynamic
+++ styles.
+++ .
+++ This package contains development files necessary to use the standard
+++ Rust libraries.
+++
+++Package: rust-gdb
+++Architecture: all
+++Depends: gdb, ${misc:Depends}
+++Suggests: gdb-doc
+++Replaces: rustc (<< 1.1.0+dfsg1-1)
+++Description: Rust debugger (gdb)
+++ Rust is a curly-brace, block-structured expression language. It
+++ visually resembles the C language family, but differs significantly
+++ in syntactic and semantic details. Its design is oriented toward
+++ concerns of "programming in the large", that is, of creating and
+++ maintaining boundaries - both abstract and operational - that
+++ preserve large-system integrity, availability and concurrency.
+++ .
+++ It supports a mixture of imperative procedural, concurrent actor,
+++ object-oriented and pure functional styles. Rust also supports
+++ generic programming and meta-programming, in both static and dynamic
+++ styles.
+++ .
+++ This package contains pretty printers and a wrapper script for
+++ invoking gdb on rust binaries.
+++
+++Package: rust-lldb
+++Architecture: all
+++# When updating, also update rust-lldb.links
+++Depends: lldb-3.9, ${misc:Depends}, python-lldb-3.9
+++Replaces: rustc (<< 1.1.0+dfsg1-1)
+++Description: Rust debugger (lldb)
+++ Rust is a curly-brace, block-structured expression language. It
+++ visually resembles the C language family, but differs significantly
+++ in syntactic and semantic details. Its design is oriented toward
+++ concerns of "programming in the large", that is, of creating and
+++ maintaining boundaries - both abstract and operational - that
+++ preserve large-system integrity, availability and concurrency.
+++ .
+++ It supports a mixture of imperative procedural, concurrent actor,
+++ object-oriented and pure functional styles. Rust also supports
+++ generic programming and meta-programming, in both static and dynamic
+++ styles.
+++ .
+++ This package contains pretty printers and a wrapper script for
+++ invoking lldb on rust binaries.
+++
+++Package: rust-doc
+++Section: doc
+++Architecture: all
+++Build-Profiles: <!nodoc>
+++Depends: ${misc:Depends}, libjs-jquery
+++Description: Rust systems programming language - Documentation
+++ Rust is a curly-brace, block-structured expression language. It
+++ visually resembles the C language family, but differs significantly
+++ in syntactic and semantic details. Its design is oriented toward
+++ concerns of "programming in the large", that is, of creating and
+++ maintaining boundaries - both abstract and operational - that
+++ preserve large-system integrity, availability and concurrency.
+++ .
+++ It supports a mixture of imperative procedural, concurrent actor,
+++ object-oriented and pure functional styles. Rust also supports
+++ generic programming and meta-programming, in both static and dynamic
+++ styles.
+++ .
+++ This package contains the Rust tutorial, language reference and
+++ standard library documentation.
--- /dev/null
--- /dev/null
--- /dev/null
+++Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+++Upstream-Name: rust
+++Source: http://www.rust-lang.org
+++Files-Excluded:
+++ src/llvm
+++ src/librustdoc/html/static/jquery-*.min.js
+++ src/rt/hoedown/src/html_blocks.c
+++
+++Files: *
+++Copyright: 2006-2009 Graydon Hoare
+++ 2009-2012 Mozilla Foundation
+++ 2012-2015 The Rust Project Developers (see AUTHORS.txt)
+++License: Expat or Apache-2.0
+++
+++Files: src/librustc_trans/cabi_x86_64.rs
+++Copyright: 2008-2010 Tachyon Technologies
+++License: BSD-2-clause
+++
+++Files: src/rt/miniz.c
+++Copyright: 1996-2012 Rich Geldreich
+++License: unlicense
+++ This is free and unencumbered software released into the public domain.
+++ .
+++ Anyone is free to copy, modify, publish, use, compile, sell, or
+++ distribute this software, either in source code form or as a compiled
+++ binary, for any purpose, commercial or non-commercial, and by any
+++ means.
+++ .
+++ In jurisdictions that recognize copyright laws, the author or authors
+++ of this software dedicate any and all copyright interest in the
+++ software to the public domain. We make this dedication for the
+++ benefit of the public at large and to the detriment of our heirs and
+++ successors. We intend this dedication to be an overt act of
+++ relinquishment in perpetuity of all present and future rights to this
+++ software under copyright law.
+++ .
+++ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+++ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+++ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+++ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
+++ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+++ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+++ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+++ .
+++ For more information, please refer to <http://unlicense.org/>
+++
+++Files: src/jemalloc/*
+++Copyright: 2002-2014 Jason Evans <jasone@canonware.com>
+++ 2007-2012 Mozilla Foundation
+++ 2009-2014 Facebook, Inc.
+++License: BSD-2-clause
+++
+++Files: src/jemalloc/bin/jeprof.in
+++Copyright: 1998-2007, Google Inc.
+++License: BSD-3-Clause
+++
+++Files: src/compiler-rt/*
+++Copyright: 2009-2015 Howard Hinnant
+++ 2009-2015 The CompileRT Developers (see src/compiler-rt/CREDITS.TXT)
+++License: BSD-3-clause or Expat
+++
+++Files: src/compiler-rt/lib/BlocksRuntime/*
+++Copyright: 2008-2010 Apple, Inc.
+++License: Expat
+++
+++Files: src/rt/hoedown/*
+++Copyright: 2008 Natacha Porté
+++ 2011 Vicent MartÃ
+++ 2013 Devin Torres and the Hoedown authors
+++License: ISC
+++
+++Files: src/libbacktrace/*
+++Copyright: 2012-2014 Free Software Foundation, Inc.
+++ (written by Ian Lance Taylor, Google.)
+++License: BSD-3-Clause
+++
+++Files:
+++ src/libbacktrace/filenames.h
+++ src/libbacktrace/ansidecl.h
+++ src/libbacktrace/hashtab.h
+++ src/libbacktrace/ltmain.sh
+++Copyright: 2000, 2001, 2007, 2010 Free Software Foundation, Inc.
+++License: GPL-2+
+++
+++Files: src/libbacktrace/dwarf2.h
+++Copyright: 1992, 1993, 1995, 1996, 1997, 1999, 2000, 2001, 2002,
+++ 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+++ Free Software Foundation, Inc.
+++License: GPL-3+ with GCC Runtime Library exception
+++
+++Files: src/librustdoc/html/static/FiraSans*
+++Copyright: 2014, Mozilla Foundation, 2014, Telefonica S.A.
+++License: SIL-OPEN-FONT
+++
+++Files: src/librustdoc/html/static/Heuristica*
+++Copyright: 1989, 1991 Adobe Systems Incorporated,
+++ 2006 Han The Thanh, Vntopia font family,
+++ 2008-2012, Andrey V. Panov
+++License: SIL-OPEN-FONT
+++
+++Files: src/librustdoc/html/static/SourceCodePro*
+++Copyright: 2010, 2012 Adobe Systems Incorporated
+++License: SIL-OPEN-FONT
+++
+++Files: src/librustdoc/html/static/SourceSerifPro*
+++Copyright: 2014 Adobe Systems Incorporated
+++License: SIL-OPEN-FONT
+++
+++Files:
+++ src/librustdoc/html/static/jquery-*.min.js
+++ debian/missing-sources/jquery-*.js
+++Copyright: 2005-2014 jQuery Foundation, Inc and other contributors
+++License: Expat
+++
+++Files: src/librustdoc/html/static/main.js
+++Copyright: 2014 The Rust Project Developers
+++License: Expat or Apache-2.0
+++
+++Files: src/libstd/memchr.rs
+++Copyright: 2015 Andrew Gallant, bluss and Nicolas Koch
+++License: Expat or Apache-2.0
+++
+++Files: src/libstd/sync/mpsc/mpsc_queue.rs
+++ src/libstd/sync/mpsc/spsc_queue.rs
+++Copyright: 2010-2011 Dmitry Vyukov
+++License: BSD-2-Clause
+++
+++Files: debian/icons/rust-logo-32x32-blk.png
+++Copyright: Mozilla Foundation
+++License: CC-BY
+++Comment:
+++ Relevant discussion in https://github.com/rust-lang/rust/issues/11562
+++
+++License: Apache-2.0
+++ On Debian systems, the full text of the Apache License
+++ Version 2.0 can be found in the file
+++ `/usr/share/common-licenses/Apache-2.0'.
+++
+++License: BSD-2-clause
+++ Redistribution and use in source and binary forms, with
+++ or without modification, are permitted provided that the
+++ following conditions are met:
+++ .
+++ 1. Redistributions of source code must retain the above
+++ copyright notice, this list of conditions and the
+++ following disclaimer.
+++ 2. Redistributions in binary form must reproduce the
+++ above copyright notice, this list of conditions and
+++ the following disclaimer in the documentation and/or
+++ other materials provided with the distribution.
+++ .
+++ THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS
+++ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+++ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+++ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+++ DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
+++ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+++ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+++ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+++ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+++ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+++ ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+++ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+++ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+++ IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+++
+++License: Expat
+++ Permission is hereby granted, free of charge, to any
+++ person obtaining a copy of this software and associated
+++ documentation files (the "Software"), to deal in the
+++ Software without restriction, including without
+++ limitation the rights to use, copy, modify, merge,
+++ publish, distribute, sublicense, and/or sell copies of
+++ the Software, and to permit persons to whom the Software
+++ is furnished to do so, subject to the following
+++ conditions:
+++ .
+++ The above copyright notice and this permission notice
+++ shall be included in all copies or substantial portions
+++ of the Software.
+++ .
+++ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
+++ ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
+++ TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+++ PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+++ SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+++ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+++ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
+++ IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+++ DEALINGS IN THE SOFTWARE.
+++
+++License: BSD-3-clause
+++ Redistribution and use in source and binary forms, with or without
+++ modification, are permitted provided that the following conditions
+++ are met:
+++ 1. Redistributions of source code must retain the above copyright
+++ notice, this list of conditions and the following disclaimer.
+++ 2. Redistributions in binary form must reproduce the above copyright
+++ notice, this list of conditions and the following disclaimer in the
+++ documentation and/or other materials provided with the distribution.
+++ 3. Neither the name of the organization nor the names of its contributors
+++ may be used to endorse or promote products derived from this software
+++ without specific prior written permission.
+++ .
+++ THIS SOFTWARE IS PROVIDED BY COPYRIGHT HOLDER AND CONTRIBUTORS ``AS IS'' AND
+++ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+++ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+++ ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+++ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+++ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+++ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+++ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+++ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+++ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+++ SUCH DAMAGE.
+++
+++License: ISC
+++ Permission to use, copy, modify, and distribute this software for any
+++ purpose with or without fee is hereby granted, provided that the above
+++ copyright notice and this permission notice appear in all copies.
+++ .
+++ THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+++ WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+++ MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+++ ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+++ WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+++ ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+++ OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+++
+++License: SIL-OPEN-FONT
+++ This Font Software is licensed under the SIL Open Font License,
+++ Version 1.1.
+++ .
+++ This license is copied below, and is also available with a FAQ at:
+++ http://scripts.sil.org/OFL
+++ .
+++ SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
+++ .
+++ PREAMBLE The goals of the Open Font License (OFL) are to stimulate
+++ worldwide development of collaborative font projects, to support the font
+++ creation efforts of academic and linguistic communities, and to provide
+++ a free and open framework in which fonts may be shared and improved in
+++ partnership with others.
+++ .
+++ The OFL allows the licensed fonts to be used, studied, modified and
+++ redistributed freely as long as they are not sold by themselves.
+++ The fonts, including any derivative works, can be bundled, embedded,
+++ redistributed and/or sold with any software provided that any reserved
+++ names are not used by derivative works. The fonts and derivatives,
+++ however, cannot be released under any other type of license. The
+++ requirement for fonts to remain under this license does not apply to
+++ any document created using the fonts or their derivatives.
+++ .
+++ DEFINITIONS
+++ "Font Software" refers to the set of files released by the Copyright
+++ Holder(s) under this license and clearly marked as such.
+++ This may include source files, build scripts and documentation.
+++ .
+++ "Reserved Font Name" refers to any names specified as such after the
+++ copyright statement(s).
+++ .
+++ "Original Version" refers to the collection of Font Software components
+++ as distributed by the Copyright Holder(s).
+++ .
+++ "Modified Version" refers to any derivative made by adding to, deleting,
+++ or substituting ? in part or in whole ?
+++ any of the components of the Original Version, by changing formats or
+++ by porting the Font Software to a new environment.
+++ .
+++ "Author" refers to any designer, engineer, programmer, technical writer
+++ or other person who contributed to the Font Software.
+++ .
+++ PERMISSION & CONDITIONS
+++ .
+++ Permission is hereby granted, free of charge, to any person obtaining a
+++ copy of the Font Software, to use, study, copy, merge, embed, modify,
+++ redistribute, and sell modified and unmodified copies of the Font
+++ Software, subject to the following conditions:
+++ .
+++ 1) Neither the Font Software nor any of its individual components,in
+++ Original or Modified Versions, may be sold by itself.
+++ .
+++ 2) Original or Modified Versions of the Font Software may be bundled,
+++ redistributed and/or sold with any software, provided that each copy
+++ contains the above copyright notice and this license. These can be
+++ included either as stand-alone text files, human-readable headers or
+++ in the appropriate machine-readable metadata fields within text or
+++ binary files as long as those fields can be easily viewed by the user.
+++ .
+++ 3) No Modified Version of the Font Software may use the Reserved Font
+++ Name(s) unless explicit written permission is granted by the
+++ corresponding Copyright Holder. This restriction only applies to the
+++ primary font name as presented to the users.
+++ .
+++ 4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
+++ Software shall not be used to promote, endorse or advertise any
+++ Modified Version, except to acknowledge the contribution(s) of the
+++ Copyright Holder(s) and the Author(s) or with their explicit written
+++ permission.
+++ 5) The Font Software, modified or unmodified, in part or in whole, must
+++ be distributed entirely under this license, and must not be distributed
+++ under any other license. The requirement for fonts to remain under
+++ this license does not apply to any document created using the Font
+++ Software.
+++ .
+++ TERMINATION
+++ This license becomes null and void if any of the above conditions are not met.
+++ .
+++ DISCLAIMER
+++ THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+++ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
+++ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+++ OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
+++ COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+++ INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
+++ DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+++ FROM, OUT OF THE USE OR INABILITY
+++
+++License: GPL-2+
+++ This program is free software; you can redistribute it and/or modify
+++ it under the terms of the GNU General Public License as published by
+++ the Free Software Foundation; either version 2 of the License, or
+++ (at your option) any later version.
+++ .
+++ This program is distributed in the hope that it will be useful,
+++ but WITHOUT ANY WARRANTY; without even the implied warranty of
+++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+++ GNU General Public License for more details.
+++ .
+++ You should have received a copy of the GNU General Public License
+++ along with this program; if not, write to the Free Software
+++ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+++Comment:
+++ On Debian systems, see /usr/share/common-licenses/GPL-2 for the full
+++ text of the GPL version 2.
+++
+++License: GPL-3+ with GCC Runtime Library exception
+++ GCC is free software; you can redistribute it and/or modify it under
+++ the terms of the GNU General Public License as published by the Free
+++ Software Foundation; either version 3, or (at your option) any later
+++ version.
+++ .
+++ GCC is distributed in the hope that it will be useful, but WITHOUT
+++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+++ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+++ License for more details.
+++ .
+++ Under Section 7 of GPL version 3, you are granted additional
+++ permissions described in the GCC Runtime Library Exception, version
+++ 3.1, as published by the Free Software Foundation.
+++ .
+++ You should have received a copy of the GNU General Public License and
+++ a copy of the GCC Runtime Library Exception along with this program;
+++ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
+++ <http://www.gnu.org/licenses/>.
+++
+++License: CC-BY
+++ Attribution 4.0 International
+++ .
+++ =======================================================================
+++ .
+++ Creative Commons Corporation ("Creative Commons") is not a law firm and
+++ does not provide legal services or legal advice. Distribution of
+++ Creative Commons public licenses does not create a lawyer-client or
+++ other relationship. Creative Commons makes its licenses and related
+++ information available on an "as-is" basis. Creative Commons gives no
+++ warranties regarding its licenses, any material licensed under their
+++ terms and conditions, or any related information. Creative Commons
+++ disclaims all liability for damages resulting from their use to the
+++ fullest extent possible.
+++ .
+++ Using Creative Commons Public Licenses
+++ .
+++ Creative Commons public licenses provide a standard set of terms and
+++ conditions that creators and other rights holders may use to share
+++ original works of authorship and other material subject to copyright
+++ and certain other rights specified in the public license below. The
+++ following considerations are for informational purposes only, are not
+++ exhaustive, and do not form part of our licenses.
+++ .
+++ Considerations for licensors: Our public licenses are
+++ intended for use by those authorized to give the public
+++ permission to use material in ways otherwise restricted by
+++ copyright and certain other rights. Our licenses are
+++ irrevocable. Licensors should read and understand the terms
+++ and conditions of the license they choose before applying it.
+++ Licensors should also secure all rights necessary before
+++ applying our licenses so that the public can reuse the
+++ material as expected. Licensors should clearly mark any
+++ material not subject to the license. This includes other CC-
+++ licensed material, or material used under an exception or
+++ limitation to copyright. More considerations for licensors:
+++ wiki.creativecommons.org/Considerations_for_licensors
+++ .
+++ Considerations for the public: By using one of our public
+++ licenses, a licensor grants the public permission to use the
+++ licensed material under specified terms and conditions. If
+++ the licensor's permission is not necessary for any reason--for
+++ example, because of any applicable exception or limitation to
+++ copyright--then that use is not regulated by the license. Our
+++ licenses grant only permissions under copyright and certain
+++ other rights that a licensor has authority to grant. Use of
+++ the licensed material may still be restricted for other
+++ reasons, including because others have copyright or other
+++ rights in the material. A licensor may make special requests,
+++ such as asking that all changes be marked or described.
+++ Although not required by our licenses, you are encouraged to
+++ respect those requests where reasonable. More_considerations
+++ for the public:
+++ wiki.creativecommons.org/Considerations_for_licensees
+++ .
+++ =======================================================================
+++ .
+++ Creative Commons Attribution 4.0 International Public License
+++ .
+++ By exercising the Licensed Rights (defined below), You accept and agree
+++ to be bound by the terms and conditions of this Creative Commons
+++ Attribution 4.0 International Public License ("Public License"). To the
+++ extent this Public License may be interpreted as a contract, You are
+++ granted the Licensed Rights in consideration of Your acceptance of
+++ these terms and conditions, and the Licensor grants You such rights in
+++ consideration of benefits the Licensor receives from making the
+++ Licensed Material available under these terms and conditions.
+++ .
+++ .
+++ Section 1 -- Definitions.
+++ .
+++ a. Adapted Material means material subject to Copyright and Similar
+++ Rights that is derived from or based upon the Licensed Material
+++ and in which the Licensed Material is translated, altered,
+++ arranged, transformed, or otherwise modified in a manner requiring
+++ permission under the Copyright and Similar Rights held by the
+++ Licensor. For purposes of this Public License, where the Licensed
+++ Material is a musical work, performance, or sound recording,
+++ Adapted Material is always produced where the Licensed Material is
+++ synched in timed relation with a moving image.
+++ .
+++ b. Adapter's License means the license You apply to Your Copyright
+++ and Similar Rights in Your contributions to Adapted Material in
+++ accordance with the terms and conditions of this Public License.
+++ .
+++ c. Copyright and Similar Rights means copyright and/or similar rights
+++ closely related to copyright including, without limitation,
+++ performance, broadcast, sound recording, and Sui Generis Database
+++ Rights, without regard to how the rights are labeled or
+++ categorized. For purposes of this Public License, the rights
+++ specified in Section 2(b)(1)-(2) are not Copyright and Similar
+++ Rights.
+++ .
+++ d. Effective Technological Measures means those measures that, in the
+++ absence of proper authority, may not be circumvented under laws
+++ fulfilling obligations under Article 11 of the WIPO Copyright
+++ Treaty adopted on December 20, 1996, and/or similar international
+++ agreements.
+++ .
+++ e. Exceptions and Limitations means fair use, fair dealing, and/or
+++ any other exception or limitation to Copyright and Similar Rights
+++ that applies to Your use of the Licensed Material.
+++ .
+++ f. Licensed Material means the artistic or literary work, database,
+++ or other material to which the Licensor applied this Public
+++ License.
+++ .
+++ g. Licensed Rights means the rights granted to You subject to the
+++ terms and conditions of this Public License, which are limited to
+++ all Copyright and Similar Rights that apply to Your use of the
+++ Licensed Material and that the Licensor has authority to license.
+++ .
+++ h. Licensor means the individual(s) or entity(ies) granting rights
+++ under this Public License.
+++ .
+++ i. Share means to provide material to the public by any means or
+++ process that requires permission under the Licensed Rights, such
+++ as reproduction, public display, public performance, distribution,
+++ dissemination, communication, or importation, and to make material
+++ available to the public including in ways that members of the
+++ public may access the material from a place and at a time
+++ individually chosen by them.
+++ .
+++ j. Sui Generis Database Rights means rights other than copyright
+++ resulting from Directive 96/9/EC of the European Parliament and of
+++ the Council of 11 March 1996 on the legal protection of databases,
+++ as amended and/or succeeded, as well as other essentially
+++ equivalent rights anywhere in the world.
+++ .
+++ k. You means the individual or entity exercising the Licensed Rights
+++ under this Public License. Your has a corresponding meaning.
+++ .
+++ .
+++ Section 2 -- Scope.
+++ .
+++ a. License grant.
+++ .
+++ 1. Subject to the terms and conditions of this Public License,
+++ the Licensor hereby grants You a worldwide, royalty-free,
+++ non-sublicensable, non-exclusive, irrevocable license to
+++ exercise the Licensed Rights in the Licensed Material to:
+++ .
+++ a. reproduce and Share the Licensed Material, in whole or
+++ in part; and
+++ .
+++ b. produce, reproduce, and Share Adapted Material.
+++ .
+++ 2. Exceptions and Limitations. For the avoidance of doubt, where
+++ Exceptions and Limitations apply to Your use, this Public
+++ License does not apply, and You do not need to comply with
+++ its terms and conditions.
+++ .
+++ 3. Term. The term of this Public License is specified in Section
+++ 6(a).
+++ .
+++ 4. Media and formats; technical modifications allowed. The
+++ Licensor authorizes You to exercise the Licensed Rights in
+++ all media and formats whether now known or hereafter created,
+++ and to make technical modifications necessary to do so. The
+++ Licensor waives and/or agrees not to assert any right or
+++ authority to forbid You from making technical modifications
+++ necessary to exercise the Licensed Rights, including
+++ technical modifications necessary to circumvent Effective
+++ Technological Measures. For purposes of this Public License,
+++ simply making modifications authorized by this Section 2(a)
+++ (4) never produces Adapted Material.
+++ .
+++ 5. Downstream recipients.
+++ .
+++ a. Offer from the Licensor -- Licensed Material. Every
+++ recipient of the Licensed Material automatically
+++ receives an offer from the Licensor to exercise the
+++ Licensed Rights under the terms and conditions of this
+++ Public License.
+++ .
+++ b. No downstream restrictions. You may not offer or impose
+++ any additional or different terms or conditions on, or
+++ apply any Effective Technological Measures to, the
+++ Licensed Material if doing so restricts exercise of the
+++ Licensed Rights by any recipient of the Licensed
+++ Material.
+++ .
+++ 6. No endorsement. Nothing in this Public License constitutes or
+++ may be construed as permission to assert or imply that You
+++ are, or that Your use of the Licensed Material is, connected
+++ with, or sponsored, endorsed, or granted official status by,
+++ the Licensor or others designated to receive attribution as
+++ provided in Section 3(a)(1)(A)(i).
+++ .
+++ b. Other rights.
+++ .
+++ 1. Moral rights, such as the right of integrity, are not
+++ licensed under this Public License, nor are publicity,
+++ privacy, and/or other similar personality rights; however, to
+++ the extent possible, the Licensor waives and/or agrees not to
+++ assert any such rights held by the Licensor to the limited
+++ extent necessary to allow You to exercise the Licensed
+++ Rights, but not otherwise.
+++ .
+++ 2. Patent and trademark rights are not licensed under this
+++ Public License.
+++ .
+++ 3. To the extent possible, the Licensor waives any right to
+++ collect royalties from You for the exercise of the Licensed
+++ Rights, whether directly or through a collecting society
+++ under any voluntary or waivable statutory or compulsory
+++ licensing scheme. In all other cases the Licensor expressly
+++ reserves any right to collect such royalties.
+++ .
+++ .
+++ Section 3 -- License Conditions.
+++ .
+++ Your exercise of the Licensed Rights is expressly made subject to the
+++ following conditions.
+++ .
+++ a. Attribution.
+++ .
+++ 1. If You Share the Licensed Material (including in modified
+++ form), You must:
+++ .
+++ a. retain the following if it is supplied by the Licensor
+++ with the Licensed Material:
+++ .
+++ i. identification of the creator(s) of the Licensed
+++ Material and any others designated to receive
+++ attribution, in any reasonable manner requested by
+++ the Licensor (including by pseudonym if
+++ designated);
+++ .
+++ ii. a copyright notice;
+++ .
+++ iii. a notice that refers to this Public License;
+++ .
+++ iv. a notice that refers to the disclaimer of
+++ warranties;
+++ .
+++ v. a URI or hyperlink to the Licensed Material to the
+++ extent reasonably practicable;
+++ .
+++ b. indicate if You modified the Licensed Material and
+++ retain an indication of any previous modifications; and
+++ .
+++ c. indicate the Licensed Material is licensed under this
+++ Public License, and include the text of, or the URI or
+++ hyperlink to, this Public License.
+++ .
+++ 2. You may satisfy the conditions in Section 3(a)(1) in any
+++ reasonable manner based on the medium, means, and context in
+++ which You Share the Licensed Material. For example, it may be
+++ reasonable to satisfy the conditions by providing a URI or
+++ hyperlink to a resource that includes the required
+++ information.
+++ .
+++ 3. If requested by the Licensor, You must remove any of the
+++ information required by Section 3(a)(1)(A) to the extent
+++ reasonably practicable.
+++ .
+++ 4. If You Share Adapted Material You produce, the Adapter's
+++ License You apply must not prevent recipients of the Adapted
+++ Material from complying with this Public License.
+++ .
+++ .
+++ Section 4 -- Sui Generis Database Rights.
+++ .
+++ Where the Licensed Rights include Sui Generis Database Rights that
+++ apply to Your use of the Licensed Material:
+++ .
+++ a. for the avoidance of doubt, Section 2(a)(1) grants You the right
+++ to extract, reuse, reproduce, and Share all or a substantial
+++ portion of the contents of the database;
+++ .
+++ b. if You include all or a substantial portion of the database
+++ contents in a database in which You have Sui Generis Database
+++ Rights, then the database in which You have Sui Generis Database
+++ Rights (but not its individual contents) is Adapted Material; and
+++ .
+++ c. You must comply with the conditions in Section 3(a) if You Share
+++ all or a substantial portion of the contents of the database.
+++ .
+++ For the avoidance of doubt, this Section 4 supplements and does not
+++ replace Your obligations under this Public License where the Licensed
+++ Rights include other Copyright and Similar Rights.
+++ .
+++ .
+++ Section 5 -- Disclaimer of Warranties and Limitation of Liability.
+++ .
+++ a. UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE
+++ EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS
+++ AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF
+++ ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS,
+++ IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION,
+++ WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR
+++ PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS,
+++ ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT
+++ KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT
+++ ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+++ .
+++ b. TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE
+++ TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION,
+++ NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT,
+++ INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES,
+++ COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR
+++ USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN
+++ ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR
+++ DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR
+++ IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+++ .
+++ c. The disclaimer of warranties and limitation of liability provided
+++ above shall be interpreted in a manner that, to the extent
+++ possible, most closely approximates an absolute disclaimer and
+++ waiver of all liability.
+++ .
+++ .
+++ Section 6 -- Term and Termination.
+++ .
+++ a. This Public License applies for the term of the Copyright and
+++ Similar Rights licensed here. However, if You fail to comply with
+++ this Public License, then Your rights under this Public License
+++ terminate automatically.
+++ .
+++ b. Where Your right to use the Licensed Material has terminated under
+++ Section 6(a), it reinstates:
+++ .
+++ 1. automatically as of the date the violation is cured, provided
+++ it is cured within 30 days of Your discovery of the
+++ violation; or
+++ .
+++ 2. upon express reinstatement by the Licensor.
+++ .
+++ For the avoidance of doubt, this Section 6(b) does not affect any
+++ right the Licensor may have to seek remedies for Your violations
+++ of this Public License.
+++ .
+++ c. For the avoidance of doubt, the Licensor may also offer the
+++ Licensed Material under separate terms or conditions or stop
+++ distributing the Licensed Material at any time; however, doing so
+++ will not terminate this Public License.
+++ .
+++ d. Sections 1, 5, 6, 7, and 8 survive termination of this Public
+++ License.
+++ .
+++ .
+++ Section 7 -- Other Terms and Conditions.
+++ .
+++ a. The Licensor shall not be bound by any additional or different
+++ terms or conditions communicated by You unless expressly agreed.
+++ .
+++ b. Any arrangements, understandings, or agreements regarding the
+++ Licensed Material not stated herein are separate from and
+++ independent of the terms and conditions of this Public License.
+++ .
+++ .
+++ Section 8 -- Interpretation.
+++ .
+++ a. For the avoidance of doubt, this Public License does not, and
+++ shall not be interpreted to, reduce, limit, restrict, or impose
+++ conditions on any use of the Licensed Material that could lawfully
+++ be made without permission under this Public License.
+++ .
+++ b. To the extent possible, if any provision of this Public License is
+++ deemed unenforceable, it shall be automatically reformed to the
+++ minimum extent necessary to make it enforceable. If the provision
+++ cannot be reformed, it shall be severed from this Public License
+++ without affecting the enforceability of the remaining terms and
+++ conditions.
+++ .
+++ c. No term or condition of this Public License will be waived and no
+++ failure to comply consented to unless expressly agreed to by the
+++ Licensor.
+++ .
+++ d. Nothing in this Public License constitutes or may be interpreted
+++ as a limitation upon, or waiver of, any privileges and immunities
+++ that apply to the Licensor or You, including from the legal
+++ processes of any jurisdiction or authority.
+++ .
+++ .
+++ =======================================================================
+++ .
+++ Creative Commons is not a party to its public licenses.
+++ Notwithstanding, Creative Commons may elect to apply one of its public
+++ licenses to material it publishes and in those instances will be
+++ considered the "Licensor." Except for the limited purpose of indicating
+++ that material is shared under a Creative Commons public license or as
+++ otherwise permitted by the Creative Commons policies published at
+++ creativecommons.org/policies, Creative Commons does not authorize the
+++ use of the trademark "Creative Commons" or any other trademark or logo
+++ of Creative Commons without its prior written consent including,
+++ without limitation, in connection with any unauthorized modifications
+++ to any of its public licenses or any other arrangements,
+++ understandings, or agreements concerning use of licensed material. For
+++ the avoidance of doubt, this paragraph does not form part of the public
+++ licenses.
+++ .
+++ Creative Commons may be contacted at creativecommons.org.
--- /dev/null
--- /dev/null
--- /dev/null
+++README.md
--- /dev/null
--- /dev/null
--- /dev/null
+++#!/bin/sh
+++set -e
+++
+++case "$1" in
+++"-N") fwd=-N; rev=-R; verb="applied";;
+++"-R") fwd=-R; rev=-N; verb="reversed";;
+++*) echo >&2 "Usage: $0 <-N|-R> <patch-file>"; exit 2;;
+++esac
+++
+++if patch --dry-run -f $rev -p1 < "$2" >/dev/null; then
+++ echo >&2 "patch already $verb: $2"
+++ exit 0
+++fi
+++patch --dry-run -f $fwd -p1 < "$2"
+++patch -f $fwd -p1 < "$2"
--- /dev/null
--- /dev/null
--- /dev/null
+++[DEFAULT]
+++pristine-tar = True
--- /dev/null
--- /dev/null
--- /dev/null
+++# "libstd" just seemed too generic
+++libstd-rust-1.15 binary: package-name-doesnt-match-sonames
+++
+++# Rust doesn't use dev shlib symlinks nor any of the other shlib support stuff
+++libstd-rust-1.15 binary: dev-pkg-without-shlib-symlink
+++libstd-rust-1.15 binary: shlib-without-versioned-soname
+++libstd-rust-1.15 binary: pkg-has-shlibs-control-file-but-no-actual-shared-libs
+++libstd-rust-1.15 binary: package-must-activate-ldconfig-trigger
+++
+++# Libraries that use libc symbols (libterm, libstd, etc) *are* linked
+++# to libc. Lintian gets upset that some Rust libraries don't need
+++# libc, boo hoo.
+++libstd-rust-1.15 binary: library-not-linked-against-libc
+++
+++# We need it for now
+++binary-or-shlib-defines-rpath usr/lib/*/lib*so /usr/lib/rustlib/*lib
--- /dev/null
--- /dev/null
--- /dev/null
+++usr/lib/rustlib/*/lib/
--- /dev/null
--- /dev/null
--- /dev/null
+++# I assure you, dear lintian, that "/usr/lib/rustlib/x86_64-unknown-linux-gnu/"
+++# is indeed an arch-specific directory.
+++libstd-rust-dev binary: arch-dependent-file-not-in-arch-specific-directory
--- /dev/null
--- /dev/null
--- /dev/null
+++#!/bin/sh
+++# See README.Debian "Bootstrapping a new distro" for details.
+++#
+++# You may want to use `debian/rules source_orig-dl` instead of calling this
+++# directly.
+++
+++set -e
+++
+++upstream_version="$(dpkg-parsechangelog -SVersion | sed -e 's/\(.*\)-.*/\1/g')"
+++upstream_bootstrap_arch="${upstream_bootstrap_arch:-amd64 arm64 armel armhf i386}"
+++
+++rm -f dl/*.sha256
+++for deb_host_arch in $upstream_bootstrap_arch; do
+++ make -s --no-print-directory -f debian/architecture-test.mk "rust-for-deb_${deb_host_arch}" | {
+++ read deb_host_arch rust_triplet
+++ python src/etc/get-stage0.py "${rust_triplet}"
+++ rm -rf "${rust_triplet}"
+++ }
+++done
+++
+++tar --mtime=@"$(date +%s)" --clamp-mtime \
+++ --owner=root --group=root \
+++ -cJf "../rustc_${upstream_version}.orig-dl.tar.xz" \
+++ --transform "s/^dl\///" \
+++ dl/*
+++
+++rm -f src/bootstrap/bootstrap.pyc
+++
+++cat <<eof
+++================================================================================
+++orig-dl bootstrapping tarball created in ../rustc_${upstream_version}.orig-dl.tar.xz
+++containing the upstream compilers for $upstream_bootstrap_arch
+++
+++You *probably* now want to do the following steps:
+++
+++1. Add [$(echo $upstream_bootstrap_arch | sed -e 's/\S*/!\0/g')] to the rustc Build-Depend in d/control
+++2. Update d/changelog
+++3. Run \`dpkg-source -b .\` to generate a .dsc that includes this tarball.
+++================================================================================
+++eof
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Set DT_SONAME when building dylibs
+++ In Rust, library filenames include a version-specific hash to help
+++ the run-time linker find the correct version. Unlike in C/C++, the
+++ compiler looks for all libraries matching a glob that ignores the
+++ hash and reads embedded metadata to work out versions, etc.
+++ .
+++ The upshot is that there is no need for the usual "libfoo.so ->
+++ libfoo-1.2.3.so" symlink common with C/C++ when building with Rust,
+++ and no need to communicate an alternate filename to use at run-time
+++ vs compile time. If linking to a Rust dylib from C/C++ however, a
+++ "libfoo.so -> libfoo-$hash.so" symlink may well be useful and in
+++ this case DT_SONAME=libfoo-$hash.so would be required. More
+++ mundanely, various tools (eg: dpkg-shlibdeps) complain if they don't
+++ find DT_SONAME on shared libraries in public directories.
+++ .
+++ This patch passes -Wl,-soname=$outfile when building dylibs (and
+++ using a GNU linker).
+++Author: Angus Lees <gus@debian.org>
+++Forwarded: no
+++
+++Index: rustc.git/src/librustc_trans/back/link.rs
+++===================================================================
+++--- rustc.git.orig/src/librustc_trans/back/link.rs
++++++ rustc.git/src/librustc_trans/back/link.rs
+++@@ -895,6 +895,13 @@ fn link_args(cmd: &mut Linker,
+++ cmd.args(&rpath::get_rpath_flags(&mut rpath_config));
+++ }
+++
++++ if (crate_type == config::CrateTypeDylib || crate_type == config::CrateTypeCdylib)
++++ && t.options.linker_is_gnu {
++++ let filename = String::from(out_filename.file_name().unwrap().to_str().unwrap());
++++ let soname = [String::from("-Wl,-soname=") + &filename];
++++ cmd.args(&soname);
++++ }
++++
+++ // Finally add all the linker arguments provided on the command line along
+++ // with any #[link_args] attributes found inside the crate
+++ if let Some(ref args) = sess.opts.cg.link_args {
--- /dev/null
--- /dev/null
--- /dev/null
+++Index: rustc.git/Makefile
+++===================================================================
+++--- rustc.git.orig/Makefile
++++++ rustc.git/Makefile
+++@@ -21,7 +21,7 @@ BOOTSTRAP := $(CFG_PYTHON) $(CFG_SRC_DIR
+++
+++ all:
+++ $(Q)$(BOOTSTRAP) build $(BOOTSTRAP_ARGS)
+++- $(Q)$(BOOTSTRAP) doc $(BOOTSTRAP_ARGS)
++++# $(Q)$(BOOTSTRAP) doc $(BOOTSTRAP_ARGS)
+++
+++ help:
+++ $(Q)echo 'Welcome to the rustbuild build system!'
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Don't download SHA256 if it's already available locally
+++ In Debian we provide the stage0 tarballs as a separate component so that the
+++ buildds don't need to access the network during the build.
+++Author: Ximin Luo <infinity0@debian.org>
+++Forwarded: not-needed
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++--- a/src/bootstrap/bootstrap.py
++++++ b/src/bootstrap/bootstrap.py
+++@@ -22,15 +22,17 @@
+++ from time import time
+++
+++
+++-def get(url, path, verbose=False):
++++def get(url, path, verbose=False, use_local_hash_if_present=False):
+++ sha_url = url + ".sha256"
+++ with tempfile.NamedTemporaryFile(delete=False) as temp_file:
+++ temp_path = temp_file.name
+++- with tempfile.NamedTemporaryFile(suffix=".sha256", delete=False) as sha_file:
+++- sha_path = sha_file.name
++++ sha_path = path + ".sha256"
+++
+++ try:
+++- download(sha_path, sha_url, False, verbose)
++++ if use_local_hash_if_present and os.path.exists(sha_path):
++++ print("using already-download file " + sha_path)
++++ else:
++++ download(sha_path, sha_url, False, verbose)
+++ if os.path.exists(path):
+++ if verify(path, sha_path, False):
+++ if verbose:
+++@@ -47,7 +49,6 @@
+++ print("moving {} to {}".format(temp_path, path))
+++ shutil.move(temp_path, path)
+++ finally:
+++- delete_if_present(sha_path, verbose)
+++ delete_if_present(temp_path, verbose)
+++
+++
+++--- a/src/etc/get-stage0.py
++++++ b/src/etc/get-stage0.py
+++@@ -31,7 +31,7 @@
+++ filename = 'rustc-{}-{}.tar.gz'.format(channel, triple)
+++ url = 'https://static.rust-lang.org/dist/{}/{}'.format(date, filename)
+++ dst = dl_dir + '/' + filename
+++- bootstrap.get(url, dst)
++++ bootstrap.get(url, dst, use_local_hash_if_present=True)
+++
+++ stage0_dst = triple + '/stage0'
+++ if os.path.exists(stage0_dst):
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Dynamically link with Debian's LLVM
+++ Hard-code -lLLVM, instead of using llvm-config to figure out which components
+++ to link in. The latter doesn't work properly anyway for dynamic linking - see
+++ LLVM bug #3201. If/when this is fixed, then Rust upstream will probably fix
+++ their code to allow for this, and after that happens we can rm this patch.
+++ .
+++ TODO: not sure if we need extra tweaks for cross-compiling
+++Author: Ximin Luo <infinity0@debian.org>
+++Forwarded: not-needed
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++Index: rustc.git/src/librustc_llvm/build.rs
+++===================================================================
+++--- rustc.git.orig/src/librustc_llvm/build.rs
++++++ rustc.git/src/librustc_llvm/build.rs
+++@@ -157,55 +157,10 @@ fn main() {
+++
+++ let (llvm_kind, llvm_link_arg) = detect_llvm_link(&llvm_config);
+++
+++- // Link in all LLVM libraries, if we're uwring the "wrong" llvm-config then
+++- // we don't pick up system libs because unfortunately they're for the host
+++- // of llvm-config, not the target that we're attempting to link.
+++- let mut cmd = Command::new(&llvm_config);
+++- cmd.arg("--libs");
+++-
+++- if let Some(link_arg) = llvm_link_arg {
+++- cmd.arg(link_arg);
+++- }
+++-
+++- if !is_crossed {
+++- cmd.arg("--system-libs");
+++- }
+++- cmd.args(&components[..]);
+++-
+++- for lib in output(&mut cmd).split_whitespace() {
+++- let name = if lib.starts_with("-l") {
+++- &lib[2..]
+++- } else if lib.starts_with("-") {
+++- &lib[1..]
+++- } else if Path::new(lib).exists() {
+++- // On MSVC llvm-config will print the full name to libraries, but
+++- // we're only interested in the name part
+++- let name = Path::new(lib).file_name().unwrap().to_str().unwrap();
+++- name.trim_right_matches(".lib")
+++- } else if lib.ends_with(".lib") {
+++- // Some MSVC libraries just come up with `.lib` tacked on, so chop
+++- // that off
+++- lib.trim_right_matches(".lib")
+++- } else {
+++- continue;
+++- };
+++-
+++- // Don't need or want this library, but LLVM's CMake build system
+++- // doesn't provide a way to disable it, so filter it here even though we
+++- // may or may not have built it. We don't reference anything from this
+++- // library and it otherwise may just pull in extra dependencies on
+++- // libedit which we don't want
+++- if name == "LLVMLineEditor" {
+++- continue;
+++- }
+++-
+++- let kind = if name.starts_with("LLVM") {
+++- llvm_kind
+++- } else {
+++- "dylib"
+++- };
+++- println!("cargo:rustc-link-lib={}={}", kind, name);
+++- }
++++ // Link in all LLVM libraries
++++ // Link in Debian full LLVM shared library.
++++ // FIXME: not sure what to do in the cross-compiling case.
++++ println!("cargo:rustc-link-lib={}={}", "dylib", "LLVM-3.9");
+++
+++ // LLVM ldflags
+++ //
+++Index: rustc.git/src/etc/mklldeps.py
+++===================================================================
+++--- rustc.git.orig/src/etc/mklldeps.py
++++++ rustc.git/src/etc/mklldeps.py
+++@@ -56,38 +56,13 @@ def runErr(args):
+++
+++ f.write("\n")
+++
+++-args = [llvm_config, '--shared-mode']
+++-args.extend(components)
+++-llvm_shared, out = runErr(args)
+++-if llvm_shared:
+++- llvm_shared = 'shared' in out
++++llvm_shared = True
+++
+++ # LLVM libs
+++-args = [llvm_config, '--libs', '--system-libs']
+++-args.extend(components)
+++-out = run(args)
+++-for lib in out.strip().replace("\n", ' ').split(' '):
+++- if len(lib) == 0:
+++- continue
+++- # in some cases we get extra spaces in between libs so ignore those
+++- if len(lib) == 1 and lib == ' ':
+++- continue
+++- # not all libs strictly follow -lfoo, on Bitrig, there is -pthread
+++- if lib[0:2] == '-l':
+++- lib = lib.strip()[2:]
+++- elif lib[0] == '-':
+++- lib = lib.strip()[1:]
+++- # If this actually points at a literal file then we're on MSVC which now
+++- # prints full paths, so get just the name of the library and strip off the
+++- # trailing ".lib"
+++- elif os.path.exists(lib):
+++- lib = os.path.basename(lib)[:-4]
+++- elif lib[-4:] == '.lib':
+++- lib = lib[:-4]
+++- f.write("#[link(name = \"" + lib + "\"")
+++- if not llvm_shared and 'LLVM' in lib:
+++- f.write(", kind = \"static\"")
+++- f.write(")]\n")
++++# Link in Debian full LLVM shared library.
++++# FIXME: not sure what to do in the cross-compiling case.
++++f.write("#[link(name = \"LLVM-3.9\")]\n")
++++
+++
+++ # LLVM ldflags
+++ out = run([llvm_config, '--ldflags'])
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Dynamically link with Debian's LLVM
+++ Hard-code -lLLVM, instead of using llvm-config to figure out which components
+++ to link in. The latter doesn't work properly anyway for dynamic linking - see
+++ LLVM bug #3201. If/when this is fixed, then Rust upstream will probably fix
+++ their code to allow for this, and after that happens we can rm this patch.
+++ .
+++ TODO: not sure if we need extra tweaks for cross-compiling
+++Author: Ximin Luo <infinity0@debian.org>
+++Forwarded: not-needed
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++--- a/src/librustc_llvm/build.rs
++++++ b/src/librustc_llvm/build.rs
+++@@ -157,55 +157,10 @@
+++
+++ let (llvm_kind, llvm_link_arg) = detect_llvm_link(&llvm_config);
+++
+++- // Link in all LLVM libraries, if we're uwring the "wrong" llvm-config then
+++- // we don't pick up system libs because unfortunately they're for the host
+++- // of llvm-config, not the target that we're attempting to link.
+++- let mut cmd = Command::new(&llvm_config);
+++- cmd.arg("--libs");
+++-
+++- if let Some(link_arg) = llvm_link_arg {
+++- cmd.arg(link_arg);
+++- }
+++-
+++- if !is_crossed {
+++- cmd.arg("--system-libs");
+++- }
+++- cmd.args(&components[..]);
+++-
+++- for lib in output(&mut cmd).split_whitespace() {
+++- let name = if lib.starts_with("-l") {
+++- &lib[2..]
+++- } else if lib.starts_with("-") {
+++- &lib[1..]
+++- } else if Path::new(lib).exists() {
+++- // On MSVC llvm-config will print the full name to libraries, but
+++- // we're only interested in the name part
+++- let name = Path::new(lib).file_name().unwrap().to_str().unwrap();
+++- name.trim_right_matches(".lib")
+++- } else if lib.ends_with(".lib") {
+++- // Some MSVC libraries just come up with `.lib` tacked on, so chop
+++- // that off
+++- lib.trim_right_matches(".lib")
+++- } else {
+++- continue;
+++- };
+++-
+++- // Don't need or want this library, but LLVM's CMake build system
+++- // doesn't provide a way to disable it, so filter it here even though we
+++- // may or may not have built it. We don't reference anything from this
+++- // library and it otherwise may just pull in extra dependencies on
+++- // libedit which we don't want
+++- if name == "LLVMLineEditor" {
+++- continue;
+++- }
+++-
+++- let kind = if name.starts_with("LLVM") {
+++- llvm_kind
+++- } else {
+++- "dylib"
+++- };
+++- println!("cargo:rustc-link-lib={}={}", kind, name);
+++- }
++++ // Link in all LLVM libraries
++++ // Link in Debian full LLVM shared library.
++++ // TODO: not sure what to do in the cross-compiling case.
++++ println!("cargo:rustc-link-lib={}={}", "dylib", "LLVM-3.9");
+++
+++ // LLVM ldflags
+++ //
+++--- a/src/etc/mklldeps.py
++++++ b/src/etc/mklldeps.py
+++@@ -56,38 +56,13 @@
+++
+++ f.write("\n")
+++
+++-args = [llvm_config, '--shared-mode']
+++-args.extend(components)
+++-llvm_shared, out = runErr(args)
+++-if llvm_shared:
+++- llvm_shared = 'shared' in out
++++llvm_shared = True
+++
+++ # LLVM libs
+++-args = [llvm_config, '--libs', '--system-libs']
+++-args.extend(components)
+++-out = run(args)
+++-for lib in out.strip().replace("\n", ' ').split(' '):
+++- if len(lib) == 0:
+++- continue
+++- # in some cases we get extra spaces in between libs so ignore those
+++- if len(lib) == 1 and lib == ' ':
+++- continue
+++- # not all libs strictly follow -lfoo, on Bitrig, there is -pthread
+++- if lib[0:2] == '-l':
+++- lib = lib.strip()[2:]
+++- elif lib[0] == '-':
+++- lib = lib.strip()[1:]
+++- # If this actually points at a literal file then we're on MSVC which now
+++- # prints full paths, so get just the name of the library and strip off the
+++- # trailing ".lib"
+++- elif os.path.exists(lib):
+++- lib = os.path.basename(lib)[:-4]
+++- elif lib[-4:] == '.lib':
+++- lib = lib[:-4]
+++- f.write("#[link(name = \"" + lib + "\"")
+++- if not llvm_shared and 'LLVM' in lib:
+++- f.write(", kind = \"static\"")
+++- f.write(")]\n")
++++# Link in Debian full LLVM shared library.
++++# TODO: not sure what to do in the cross-compiling case.
++++f.write("#[link(name = \"LLVM-3.9\")]\n")
++++
+++
+++ # LLVM ldflags
+++ out = run([llvm_config, '--ldflags'])
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Fill in mips Makefile rules
+++ Upstream is about to delete the Makefiles in the next version, so this will
+++ remain a Debian-specific patch.
+++Author: Ximin Luo <infinity0@debian.org>
+++Bug: https://github.com/rust-lang/rust/pull/38650
+++Forwarded: not-needed
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++--- a/mk/cfg/mips-unknown-linux-gnu.mk
++++++ b/mk/cfg/mips-unknown-linux-gnu.mk
+++@@ -18,7 +18,7 @@
+++ CFG_WINDOWSY_mips-unknown-linux-gnu :=
+++ CFG_UNIXY_mips-unknown-linux-gnu := 1
+++ CFG_LDPATH_mips-unknown-linux-gnu :=
+++-CFG_RUN_mips-unknown-linux-gnu=
+++-CFG_RUN_TARG_mips-unknown-linux-gnu=
++++CFG_RUN_mips-unknown-linux-gnu=$(2)
++++CFG_RUN_TARG_mips-unknown-linux-gnu=$(call CFG_RUN_mips-unknown-linux-gnu,,$(2))
+++ RUSTC_FLAGS_mips-unknown-linux-gnu :=
+++ CFG_GNU_TRIPLE_mips-unknown-linux-gnu := mips-unknown-linux-gnu
+++--- a/mk/cfg/mips64-unknown-linux-gnuabi64.mk
++++++ b/mk/cfg/mips64-unknown-linux-gnuabi64.mk
+++@@ -1 +1,24 @@
+++-# rustbuild-only target
++++# mips64-unknown-linux-gnuabi64 configuration
++++CC_mips64-unknown-linux-gnuabi64=mips64-linux-gnuabi64-gcc
++++CXX_mips64-unknown-linux-gnuabi64=mips64-linux-gnuabi64-g++
++++CPP_mips64-unknown-linux-gnuabi64=mips64-linux-gnuabi64-gcc
++++AR_mips64-unknown-linux-gnuabi64=mips64-linux-gnuabi64-ar
++++CFG_LIB_NAME_mips64-unknown-linux-gnuabi64=lib$(1).so
++++CFG_STATIC_LIB_NAME_mips64-unknown-linux-gnuabi64=lib$(1).a
++++CFG_LIB_GLOB_mips64-unknown-linux-gnuabi64=lib$(1)-*.so
++++CFG_LIB_DSYM_GLOB_mips64-unknown-linux-gnuabi64=lib$(1)-*.dylib.dSYM
++++CFG_JEMALLOC_CFLAGS_mips64-unknown-linux-gnuabi64 := -mips64r2 -mabi=64 $(CFLAGS)
++++CFG_GCCISH_CFLAGS_mips64-unknown-linux-gnuabi64 := -Wall -g -fPIC -mips64r2 -mabi=64 $(CFLAGS)
++++CFG_GCCISH_CXXFLAGS_mips64-unknown-linux-gnuabi64 := -fno-rtti $(CXXFLAGS)
++++CFG_GCCISH_LINK_FLAGS_mips64-unknown-linux-gnuabi64 := -shared -fPIC -g -mips64r2
++++CFG_GCCISH_DEF_FLAG_mips64-unknown-linux-gnuabi64 := -Wl,--export-dynamic,--dynamic-list=
++++CFG_LLC_FLAGS_mips64-unknown-linux-gnuabi64 :=
++++CFG_INSTALL_NAME_mips64-unknown-linux-gnuabi64 =
++++CFG_EXE_SUFFIX_mips64-unknown-linux-gnuabi64 :=
++++CFG_WINDOWSY_mips64-unknown-linux-gnuabi64 :=
++++CFG_UNIXY_mips64-unknown-linux-gnuabi64 := 1
++++CFG_LDPATH_mips64-unknown-linux-gnuabi64 :=
++++CFG_RUN_mips64-unknown-linux-gnuabi64=$(2)
++++CFG_RUN_TARG_mips64-unknown-linux-gnuabi64=$(call CFG_RUN_mips64-unknown-linux-gnuabi64,,$(2))
++++RUSTC_FLAGS_mips64-unknown-linux-gnuabi64 :=
++++CFG_GNU_TRIPLE_mips64-unknown-linux-gnuabi64 := mips64-unknown-linux-gnuabi64
+++--- a/mk/cfg/mips64el-unknown-linux-gnuabi64.mk
++++++ b/mk/cfg/mips64el-unknown-linux-gnuabi64.mk
+++@@ -1 +1,24 @@
+++-# rustbuild-only target
++++# mips64el-unknown-linux-gnuabi64 configuration
++++CC_mips64el-unknown-linux-gnuabi64=mips64el-linux-gnuabi64-gcc
++++CXX_mips64el-unknown-linux-gnuabi64=mips64el-linux-gnuabi64-g++
++++CPP_mips64el-unknown-linux-gnuabi64=mips64el-linux-gnuabi64-gcc
++++AR_mips64el-unknown-linux-gnuabi64=mips64el-linux-gnuabi64-ar
++++CFG_LIB_NAME_mips64el-unknown-linux-gnuabi64=lib$(1).so
++++CFG_STATIC_LIB_NAME_mips64el-unknown-linux-gnuabi64=lib$(1).a
++++CFG_LIB_GLOB_mips64el-unknown-linux-gnuabi64=lib$(1)-*.so
++++CFG_LIB_DSYM_GLOB_mips64el-unknown-linux-gnuabi64=lib$(1)-*.dylib.dSYM
++++CFG_JEMALLOC_CFLAGS_mips64el-unknown-linux-gnuabi64 := -mips64r2 -mabi=64 $(CFLAGS)
++++CFG_GCCISH_CFLAGS_mips64el-unknown-linux-gnuabi64 := -Wall -g -fPIC -mips64r2 -mabi=64 $(CFLAGS)
++++CFG_GCCISH_CXXFLAGS_mips64el-unknown-linux-gnuabi64 := -fno-rtti $(CXXFLAGS)
++++CFG_GCCISH_LINK_FLAGS_mips64el-unknown-linux-gnuabi64 := -shared -fPIC -g -mips64r2
++++CFG_GCCISH_DEF_FLAG_mips64el-unknown-linux-gnuabi64 := -Wl,--export-dynamic,--dynamic-list=
++++CFG_LLC_FLAGS_mips64el-unknown-linux-gnuabi64 :=
++++CFG_INSTALL_NAME_mips64el-unknown-linux-gnuabi64 =
++++CFG_EXE_SUFFIX_mips64el-unknown-linux-gnuabi64 :=
++++CFG_WINDOWSY_mips64el-unknown-linux-gnuabi64 :=
++++CFG_UNIXY_mips64el-unknown-linux-gnuabi64 := 1
++++CFG_LDPATH_mips64el-unknown-linux-gnuabi64 :=
++++CFG_RUN_mips64el-unknown-linux-gnuabi64=$(2)
++++CFG_RUN_TARG_mips64el-unknown-linux-gnuabi64=$(call CFG_RUN_mips64el-unknown-linux-gnuabi64,,$(2))
++++RUSTC_FLAGS_mips64el-unknown-linux-gnuabi64 :=
++++CFG_GNU_TRIPLE_mips64el-unknown-linux-gnuabi64 := mips64el-unknown-linux-gnuabi64
+++--- a/mk/cfg/mipsel-unknown-linux-gnu.mk
++++++ b/mk/cfg/mipsel-unknown-linux-gnu.mk
+++@@ -1,7 +1,7 @@
+++ # mipsel-unknown-linux-gnu configuration
+++ CC_mipsel-unknown-linux-gnu=mipsel-linux-gnu-gcc
+++ CXX_mipsel-unknown-linux-gnu=mipsel-linux-gnu-g++
+++-CPP_mipsel-unknown-linux-gnu=mipsel-linux-gnu-gcc
++++CPP_mipsel-unknown-linux-gnu=mipsel-linux-gnu-gcc -E
+++ AR_mipsel-unknown-linux-gnu=mipsel-linux-gnu-ar
+++ CFG_LIB_NAME_mipsel-unknown-linux-gnu=lib$(1).so
+++ CFG_STATIC_LIB_NAME_mipsel-unknown-linux-gnu=lib$(1).a
+++@@ -18,7 +18,7 @@
+++ CFG_WINDOWSY_mipsel-unknown-linux-gnu :=
+++ CFG_UNIXY_mipsel-unknown-linux-gnu := 1
+++ CFG_LDPATH_mipsel-unknown-linux-gnu :=
+++-CFG_RUN_mipsel-unknown-linux-gnu=
+++-CFG_RUN_TARG_mipsel-unknown-linux-gnu=
++++CFG_RUN_mipsel-unknown-linux-gnu=$(2)
++++CFG_RUN_TARG_mipsel-unknown-linux-gnu=$(call CFG_RUN_mipsel-unknown-linux-gnu,,$(2))
+++ RUSTC_FLAGS_mipsel-unknown-linux-gnu :=
+++ CFG_GNU_TRIPLE_mipsel-unknown-linux-gnu := mipsel-unknown-linux-gnu
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Fix configure architecture targets for Debian
+++ Rust upstream sometimes builds for multiple triplets depending on the CPU,
+++ since it could be valid for multiple triplets. We don't need to do this for
+++ Debian; each DEB_HOST_ARCH maps to a single triplet. This patch indirectly
+++ achieves this by setting CFG_{OS,CPU}TYPE to more specific values depending
+++ on what DEB_HOST_ARCH is, hopefully preventing a multiple build.
+++ .
+++ Tested on armhf, untested on armel due to missing build-deps.
+++Author: Ximin Luo <infinity0@debian.org>
+++Forwarded: not-needed
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++--- a/configure
++++++ b/configure
+++@@ -514,8 +514,19 @@
+++ ;;
+++
+++ armv7l | armv8l)
+++- CFG_CPUTYPE=armv7
+++- CFG_OSTYPE="${CFG_OSTYPE}eabihf"
++++ case $DEB_HOST_ARCH in
++++ armhf)
++++ CFG_CPUTYPE=armv7
++++ CFG_OSTYPE="${CFG_OSTYPE}eabihf"
++++ ;;
++++ armel)
++++ CFG_CPUTYPE=arm
++++ CFG_OSTYPE="${CFG_OSTYPE}eabi"
++++ ;;
++++ *)
++++ err "unknown DEB_HOST_ARCH $DEB_HOST_ARCH for armv7l/armv8l cpu"
++++ ;;
++++ esac
+++ ;;
+++
+++ aarch64)
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Fix configure architecture targets for Debian
+++ Rust upstream sometimes builds for multiple triplets depending on the CPU,
+++ since it could be valid for multiple triplets. We don't need to do this for
+++ Debian; each DEB_HOST_ARCH maps to a single triplet. This patch indirectly
+++ achieves this by setting CFG_{OS,CPU}TYPE to more specific values depending
+++ on what DEB_HOST_ARCH is, hopefully preventing a multiple build.
+++ .
+++ Tested on armhf, untested on armel due to missing build-deps.
+++Author: Ximin Luo <infinity0@debian.org>
+++Forwarded: not-needed
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++Index: rustc.git/configure
+++===================================================================
+++--- rustc.git.orig/configure
++++++ rustc.git/configure
+++@@ -508,8 +508,19 @@ case $CFG_CPUTYPE in
+++ ;;
+++
+++ armv7l)
+++- CFG_CPUTYPE=armv7
+++- CFG_OSTYPE="${CFG_OSTYPE}eabihf"
++++ case $DEB_HOST_ARCH in
++++ armhf)
++++ CFG_CPUTYPE=armv7
++++ CFG_OSTYPE="${CFG_OSTYPE}eabihf"
++++ ;;
++++ armel)
++++ CFG_CPUTYPE=arm
++++ CFG_OSTYPE="${CFG_OSTYPE}eabi"
++++ ;;
++++ *)
++++ err "unknown DEB_HOST_ARCH $DEB_HOST_ARCH for armv7l cpu"
++++ ;;
++++ esac
+++ ;;
+++
+++ aarch64)
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: TODO
+++ See https://lists.alioth.debian.org/pipermail/pkg-rust-maintainers/2017-February/000828.html
+++ for possible followups
+++Author: Erwan Prioul <erwan@linux.vnet.ibm.com>
+++Forwarded: TODO
+++
+++diff -Naur a/src/test/run-make/issue-24445/Makefile b/src/test/run-make/issue-24445/Makefile
+++--- a/src/test/run-make/issue-24445/Makefile 2017-02-17 10:21:17.092001151 +0000
++++++ b/src/test/run-make/issue-24445/Makefile 2017-02-21 13:07:36.719995153 +0000
+++@@ -3,9 +3,9 @@
+++ ifeq ($(UNAME),Linux)
+++ all:
+++ $(RUSTC) foo.rs
+++- $(CC) foo.c -lfoo -L $(TMPDIR) -Wl,--gc-sections -lpthread -o $(TMPDIR)/foo
++++ $(CC) foo.c -lfoo -L $(TMPDIR) -Wl,--gc-sections -lpthread -ldl -o $(TMPDIR)/foo
+++ $(call RUN,foo)
+++- $(CC) foo.c -lfoo -L $(TMPDIR) -Wl,--gc-sections -lpthread -pie -fPIC -o $(TMPDIR)/foo
++++ $(CC) foo.c -lfoo -L $(TMPDIR) -Wl,--gc-sections -lpthread -ldl -pie -fPIC -o $(TMPDIR)/foo
+++ $(call RUN,foo)
+++ else
+++ all:
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Hardcode GDB python module directory
+++ Debian package installs python modules into a fixed directory, so
+++ just hardcode path in wrapper script.
+++Author: Angus Lees <gus@debian.org>
+++Forwarded: not-needed
+++
+++--- a/src/etc/rust-gdb
++++++ b/src/etc/rust-gdb
+++@@ -13,11 +13,13 @@
+++ set -e
+++
+++ # Find out where the pretty printer Python module is
+++-RUSTC_SYSROOT=`rustc --print=sysroot`
+++-GDB_PYTHON_MODULE_DIRECTORY="$RUSTC_SYSROOT/lib/rustlib/etc"
++++#RUSTC_SYSROOT=`rustc --print=sysroot`
++++#GDB_PYTHON_MODULE_DIRECTORY="$RUSTC_SYSROOT/lib/rustlib/etc"
++++# We can just hardcode this on Debian, and remove the rustc dependency
++++GDB_PYTHON_MODULE_DIRECTORY="/usr/share/rust-gdb"
+++
+++ # Run GDB with the additional arguments that load the pretty printers
+++-PYTHONPATH="$PYTHONPATH:$GDB_PYTHON_MODULE_DIRECTORY" gdb \
++++PYTHONPATH="$PYTHONPATH:$GDB_PYTHON_MODULE_DIRECTORY" exec gdb \
+++ -d "$GDB_PYTHON_MODULE_DIRECTORY" \
+++ -iex "add-auto-load-safe-path $GDB_PYTHON_MODULE_DIRECTORY" \
+++ "$@"
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Hardcode LLDB python module directory
+++ Debian package installs python modules into a fixed directory, so
+++ just hardcode path in wrapper script.
+++Author: Angus Lees <gus@debian.org>
+++Forwarded: not-needed
+++
+++--- a/src/etc/rust-lldb
++++++ b/src/etc/rust-lldb
+++@@ -12,7 +12,7 @@
+++ # Exit if anything fails
+++ set -e
+++
+++-LLDB_VERSION=`lldb --version 2>/dev/null | head -1 | cut -d. -f1`
++++LLDB_VERSION=`lldb-3.9 --version 2>/dev/null | head -1 | cut -d. -f1`
+++
+++ if [ "$LLDB_VERSION" = "lldb-350" ]
+++ then
+++@@ -29,13 +29,10 @@
+++ # Make sure to delete the tempfile no matter what
+++ trap "rm -f $TMPFILE; exit" INT TERM EXIT
+++
+++-# Find out where to look for the pretty printer Python module
+++-RUSTC_SYSROOT=`rustc --print sysroot`
+++-
+++ # Write the LLDB script to the tempfile
+++-echo "command script import \"$RUSTC_SYSROOT/lib/rustlib/etc/lldb_rust_formatters.py\"" >> $TMPFILE
++++echo "command script import \"/usr/share/rust-lldb/lldb_rust_formatters.py\"" >> $TMPFILE
+++ echo "type summary add --no-value --python-function lldb_rust_formatters.print_val -x \".*\" --category Rust" >> $TMPFILE
+++ echo "type category enable Rust" >> $TMPFILE
+++
+++ # Call LLDB with the script added to the argument list
+++-lldb --source-before-file="$TMPFILE" "$@"
++++lldb-3.9 --source-before-file="$TMPFILE" "$@"
--- /dev/null
--- /dev/null
--- /dev/null
+++Index: rustc.git/src/librustdoc/html/render.rs
+++===================================================================
+++--- rustc.git.orig/src/librustdoc/html/render.rs
++++++ rustc.git/src/librustdoc/html/render.rs
+++@@ -656,8 +656,16 @@ fn write_shared(cx: &Context,
+++ // Add all the static files. These may already exist, but we just
+++ // overwrite them anyway to make sure that they're fresh and up-to-date.
+++
+++- write(cx.dst.join("jquery.js"),
+++- include_bytes!("static/jquery-2.1.4.min.js"))?;
++++ {
++++ // In Debian, just copy the system jquery instead.
++++ // If the file gets installed, we can eventually create something like
++++ // dh_rustdoc, similar to dh_sphinxdoc to detect these copies and
++++ // convert them into symlinks.
++++ let jquery_system_path = "/usr/share/javascript/jquery/jquery.min.js";
++++ let jquery = cx.dst.join("jquery.js");
++++ let jquery = jquery.as_path();
++++ try_err!(fs::copy(jquery_system_path, jquery), &jquery);
++++ }
+++ write(cx.dst.join("main.js"),
+++ include_bytes!("static/main.js"))?;
+++ write(cx.dst.join("rustdoc.css"),
--- /dev/null
--- /dev/null
--- /dev/null
+++# Patches for upstream
+++# Ideally we would order these as follows:
+++# [ applied already ], [ pending ], [ forwarded or to-be-forwarded ]
+++u-reproducible-dl-stage0.patch
+++u-ignoretest-armhf_01.patch
+++u-ignoretest-armhf_02.patch
+++u-ignoretest-armhf_03.patch
+++u-ignoretest-armhf_04.patch
+++u-ignoretest-arm64-stdcall.patch
+++#u-ignoretest-i386.patch
+++u-ignoretest-arm64.patch
+++u-ignoretest-jemalloc.patch
+++u-detect-mips-cpu.patch
+++u-ignoretest-powerpc.patch
+++u-destdir-support.diff
+++u-arm-on-64bit-kernel.diff
+++
+++# Debian-specific patches, not suitable for upstream
+++d-rust-gdb-paths
+++d-rust-lldb-paths
+++d-add-soname.patch
+++d-dont-download-stage0.patch
+++d-fix-configure-for-deb-arches.patch
+++d-dynamic-link-llvm.patch
+++d-use-system-jquery.patch
+++d-fill-in-mips-mk-rules.patch
+++d-missing-ref-dlsym-ppc64el.patch
+++
+++# This might be useful for 1.16 when mk/ is deleted; however we need to figure
+++# out how to apply the equivalent patch in a different file, as Makefile is a
+++# generated file. For 1.15 mk/ still applies and all-no-docs still exists
+++#d-disable-doc-build-in-all.diff
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Support armhf running on a 64-bit kernel
+++Author: Matthias Klose <doko@debian.org>
+++Applied-Upstream: commit:0a55c8e659f0fc540b740101f7a02ab28e300aa4
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++Index: b/configure
+++===================================================================
+++--- a/configure
++++++ b/configure
+++@@ -513,7 +513,7 @@ case $CFG_CPUTYPE in
+++ CFG_OSTYPE="${CFG_OSTYPE}eabihf"
+++ ;;
+++
+++- armv7l)
++++ armv7l | armv8l)
+++ CFG_CPUTYPE=armv7
+++ CFG_OSTYPE="${CFG_OSTYPE}eabihf"
+++ ;;
+++Index: b/src/bootstrap/bootstrap.py
+++===================================================================
+++--- a/src/bootstrap/bootstrap.py
++++++ b/src/bootstrap/bootstrap.py
+++@@ -372,7 +372,7 @@ class RustBuild(object):
+++ cputype = 'i686'
+++ elif cputype in {'xscale', 'arm'}:
+++ cputype = 'arm'
+++- elif cputype == 'armv7l':
++++ elif cputype in {'armv7l', 'armv8l'}:
+++ cputype = 'arm'
+++ ostype += 'eabihf'
+++ elif cputype == 'aarch64':
--- /dev/null
--- /dev/null
--- /dev/null
+++diff --git a/src/bootstrap/compile.rs b/src/bootstrap/compile.rs
+++index 04d01759a..90f3ae956 100644
+++--- a/src/bootstrap/compile.rs
++++++ b/src/bootstrap/compile.rs
+++@@ -187,7 +187,7 @@ pub fn rustc<'a>(build: &'a Build, target: &str, compiler: &Compiler<'a>) {
+++ cargo.env("CFG_RELEASE", &build.release)
+++ .env("CFG_RELEASE_CHANNEL", &build.config.channel)
+++ .env("CFG_VERSION", &build.version)
+++- .env("CFG_PREFIX", build.config.prefix.clone().unwrap_or(String::new()))
++++ .env("CFG_PREFIX", build.config.prefix.clone().unwrap_or(PathBuf::new()))
+++ .env("CFG_LIBDIR_RELATIVE", "lib");
+++
+++ // If we're not building a compiler with debugging information then remove
+++diff --git a/src/bootstrap/config.rs b/src/bootstrap/config.rs
+++index 1f67b52db..e90d7ed24 100644
+++--- a/src/bootstrap/config.rs
++++++ b/src/bootstrap/config.rs
+++@@ -85,10 +85,10 @@ pub struct Config {
+++ pub quiet_tests: bool,
+++ // Fallback musl-root for all targets
+++ pub musl_root: Option<PathBuf>,
+++- pub prefix: Option<String>,
+++- pub docdir: Option<String>,
+++- pub libdir: Option<String>,
+++- pub mandir: Option<String>,
++++ pub prefix: Option<PathBuf>,
++++ pub docdir: Option<PathBuf>,
++++ pub libdir: Option<PathBuf>,
++++ pub mandir: Option<PathBuf>,
+++ pub codegen_tests: bool,
+++ pub nodejs: Option<PathBuf>,
+++ pub gdb: Option<PathBuf>,
+++@@ -114,6 +114,7 @@ pub struct Target {
+++ #[derive(RustcDecodable, Default)]
+++ struct TomlConfig {
+++ build: Option<Build>,
++++ install: Option<Install>,
+++ llvm: Option<Llvm>,
+++ rust: Option<Rust>,
+++ target: Option<HashMap<String, TomlTarget>>,
+++@@ -136,6 +137,15 @@ struct Build {
+++ python: Option<String>,
+++ }
+++
++++/// TOML representation of various global install decisions.
++++#[derive(RustcDecodable, Default, Clone)]
++++struct Install {
++++ prefix: Option<String>,
++++ mandir: Option<String>,
++++ docdir: Option<String>,
++++ libdir: Option<String>,
++++}
++++
+++ /// TOML representation of how the LLVM build is configured.
+++ #[derive(RustcDecodable, Default)]
+++ struct Llvm {
+++@@ -260,6 +270,13 @@ impl Config {
+++ set(&mut config.submodules, build.submodules);
+++ set(&mut config.vendor, build.vendor);
+++
++++ if let Some(ref install) = toml.install {
++++ config.prefix = install.prefix.clone().map(PathBuf::from);
++++ config.mandir = install.mandir.clone().map(PathBuf::from);
++++ config.docdir = install.docdir.clone().map(PathBuf::from);
++++ config.libdir = install.libdir.clone().map(PathBuf::from);
++++ }
++++
+++ if let Some(ref llvm) = toml.llvm {
+++ match llvm.ccache {
+++ Some(StringOrBool::String(ref s)) => {
+++@@ -277,6 +294,7 @@ impl Config {
+++ set(&mut config.llvm_version_check, llvm.version_check);
+++ set(&mut config.llvm_static_stdcpp, llvm.static_libstdcpp);
+++ }
++++
+++ if let Some(ref rust) = toml.rust {
+++ set(&mut config.rust_debug_assertions, rust.debug_assertions);
+++ set(&mut config.rust_debuginfo, rust.debuginfo);
+++@@ -443,16 +461,16 @@ impl Config {
+++ self.channel = value.to_string();
+++ }
+++ "CFG_PREFIX" => {
+++- self.prefix = Some(value.to_string());
++++ self.prefix = Some(PathBuf::from(value));
+++ }
+++ "CFG_DOCDIR" => {
+++- self.docdir = Some(value.to_string());
++++ self.docdir = Some(PathBuf::from(value));
+++ }
+++ "CFG_LIBDIR" => {
+++- self.libdir = Some(value.to_string());
++++ self.libdir = Some(PathBuf::from(value));
+++ }
+++ "CFG_MANDIR" => {
+++- self.mandir = Some(value.to_string());
++++ self.mandir = Some(PathBuf::from(value));
+++ }
+++ "CFG_LLVM_ROOT" if value.len() > 0 => {
+++ let target = self.target_config.entry(self.build.clone())
+++diff --git a/src/bootstrap/config.toml.example b/src/bootstrap/config.toml.example
+++index 22542f873..b22d68ea2 100644
+++--- a/src/bootstrap/config.toml.example
++++++ b/src/bootstrap/config.toml.example
+++@@ -72,6 +72,9 @@
+++ # specified, use this rustc binary instead as the stage0 snapshot compiler.
+++ #rustc = "/path/to/bin/rustc"
+++
++++# Instead of installing installing to /usr/local, install to this path instead.
++++#prefix = "/path/to/install"
++++
+++ # Flag to specify whether any documentation is built. If false, rustdoc and
+++ # friends will still be compiled but they will not be used to generate any
+++ # documentation.
+++diff --git a/src/bootstrap/install.rs b/src/bootstrap/install.rs
+++index 9bc5a7c00..efc460f35 100644
+++--- a/src/bootstrap/install.rs
++++++ b/src/bootstrap/install.rs
+++@@ -13,9 +13,9 @@
+++ //! This module is responsible for installing the standard library,
+++ //! compiler, and documentation.
+++
++++use std::env;
+++ use std::fs;
+++-use std::borrow::Cow;
+++-use std::path::Path;
++++use std::path::{Path, PathBuf, Component};
+++ use std::process::Command;
+++
+++ use Build;
+++@@ -23,23 +23,35 @@ use dist::{package_vers, sanitize_sh, tmpdir};
+++
+++ /// Installs everything.
+++ pub fn install(build: &Build, stage: u32, host: &str) {
+++- let prefix = build.config.prefix.as_ref().clone().map(|x| Path::new(x))
+++- .unwrap_or(Path::new("/usr/local"));
+++- let docdir = build.config.docdir.as_ref().clone().map(|x| Cow::Borrowed(Path::new(x)))
+++- .unwrap_or(Cow::Owned(prefix.join("share/doc/rust")));
+++- let libdir = build.config.libdir.as_ref().clone().map(|x| Cow::Borrowed(Path::new(x)))
+++- .unwrap_or(Cow::Owned(prefix.join("lib")));
+++- let mandir = build.config.mandir.as_ref().clone().map(|x| Cow::Borrowed(Path::new(x)))
+++- .unwrap_or(Cow::Owned(prefix.join("share/man")));
++++ let prefix_default = PathBuf::from("/usr/local");
++++ let docdir_default = PathBuf::from("share/doc/rust");
++++ let mandir_default = PathBuf::from("share/man");
++++ let libdir_default = PathBuf::from("lib");
++++ let prefix = build.config.prefix.as_ref().unwrap_or(&prefix_default);
++++ let docdir = build.config.docdir.as_ref().unwrap_or(&docdir_default);
++++ let libdir = build.config.libdir.as_ref().unwrap_or(&libdir_default);
++++ let mandir = build.config.mandir.as_ref().unwrap_or(&mandir_default);
++++
++++ let docdir = prefix.join(docdir);
++++ let libdir = prefix.join(libdir);
++++ let mandir = prefix.join(mandir);
++++
++++ let destdir = env::var_os("DESTDIR").map(PathBuf::from);
++++
++++ let prefix = add_destdir(&prefix, &destdir);
++++ let docdir = add_destdir(&docdir, &destdir);
++++ let libdir = add_destdir(&libdir, &destdir);
++++ let mandir = add_destdir(&mandir, &destdir);
++++
+++ let empty_dir = build.out.join("tmp/empty_dir");
+++ t!(fs::create_dir_all(&empty_dir));
+++ if build.config.docs {
+++- install_sh(&build, "docs", "rust-docs", stage, host, prefix,
++++ install_sh(&build, "docs", "rust-docs", stage, host, &prefix,
+++ &docdir, &libdir, &mandir, &empty_dir);
+++ }
+++- install_sh(&build, "std", "rust-std", stage, host, prefix,
++++ install_sh(&build, "std", "rust-std", stage, host, &prefix,
+++ &docdir, &libdir, &mandir, &empty_dir);
+++- install_sh(&build, "rustc", "rustc", stage, host, prefix,
++++ install_sh(&build, "rustc", "rustc", stage, host, &prefix,
+++ &docdir, &libdir, &mandir, &empty_dir);
+++ t!(fs::remove_dir_all(&empty_dir));
+++ }
+++@@ -59,3 +71,17 @@ fn install_sh(build: &Build, package: &str, name: &str, stage: u32, host: &str,
+++ .arg("--disable-ldconfig");
+++ build.run(&mut cmd);
+++ }
++++
++++fn add_destdir(path: &Path, destdir: &Option<PathBuf>) -> PathBuf {
++++ let mut ret = match *destdir {
++++ Some(ref dest) => dest.clone(),
++++ None => return path.to_path_buf(),
++++ };
++++ for part in path.components() {
++++ match part {
++++ Component::Normal(s) => ret.push(s),
++++ _ => {}
++++ }
++++ }
++++ return ret
++++}
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Detect mips CPUs in ./configure
+++ This basically recreates the logic that already exists in bootstrap.py
+++ Endianness test from https://stackoverflow.com/questions/26859098/testing-endianness-of-system-with-the-unix-shell
+++Author: Ximin Luo <infinity0@debian.org>
+++Bug: https://github.com/rust-lang/rust/pull/38650
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++--- a/configure
++++++ b/configure
+++@@ -388,6 +388,7 @@
+++
+++ CFG_OSTYPE=$(uname -s)
+++ CFG_CPUTYPE=$(uname -m)
++++ENDIAN=$(printf '\1' | od -dAn)
+++
+++ if [ $CFG_OSTYPE = Darwin -a $CFG_CPUTYPE = i386 ]
+++ then
+++@@ -541,6 +542,17 @@
+++ CFG_CPUTYPE=x86_64
+++ ;;
+++
++++ mips | mips64)
++++ if [ "$CFG_CPUTYPE" = "mips64" ]; then
++++ CFG_OSTYPE="${CFG_OSTYPE}abi64"
++++ fi
++++ if [ "$ENDIAN" -eq 1 ]; then
++++ CFG_CPUTYPE="${CFG_CPUTYPE}el"
++++ elif [ "$ENDIAN" -ne 256 ]; then
++++ err "unknown endianness: $ENDIAN (expecting 1 for little or 256 for big)"
++++ fi
++++ ;;
++++
+++ BePC)
+++ CFG_CPUTYPE=i686
+++ ;;
+++--- a/src/test/run-pass/conditional-compile-arch.rs
++++++ b/src/test/run-pass/conditional-compile-arch.rs
+++@@ -22,6 +22,12 @@
+++ #[cfg(target_arch = "aarch64")]
+++ pub fn main() { }
+++
++++#[cfg(target_arch = "mips")]
++++pub fn main() { }
++++
++++#[cfg(target_arch = "mips64")]
++++pub fn main() { }
++++
+++ #[cfg(target_arch = "powerpc64")]
+++ pub fn main() { }
+++
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Ignore failing stdcall test on arm64
+++ Disable test that fails on Debian; "stdcall" is a win32 calling convention and
+++ not supposed to work here anyway.
+++Author: Ximin Luo <infinity0@debian.org>
+++Bug: https://github.com/rust-lang/rust/issues/36348
+++Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=837533
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++Index: rust/src/test/debuginfo/type-names.rs
+++===================================================================
+++--- rust.orig/src/test/debuginfo/type-names.rs
++++++ rust/src/test/debuginfo/type-names.rs
+++@@ -363,7 +363,7 @@ fn main() {
+++ let rust_fn_with_return_value = (rust_fn_with_return_value, 0_usize);
+++ let extern_c_fn_with_return_value = (extern_c_fn_with_return_value, 0_usize);
+++ let unsafe_fn_with_return_value = (unsafe_fn_with_return_value, 0_usize);
+++- let extern_stdcall_fn_with_return_value = (extern_stdcall_fn_with_return_value, 0_usize);
++++// let extern_stdcall_fn_with_return_value = (extern_stdcall_fn_with_return_value, 0_usize);
+++
+++ let generic_function_int = (generic_function::<isize>, 0_usize);
+++ let generic_function_struct3 = (generic_function::<mod1::mod2::Struct3>, 0_usize);
--- /dev/null
--- /dev/null
--- /dev/null
+++Index: rustc.git/src/test/run-pass-valgrind/down-with-thread-dtors.rs
+++===================================================================
+++--- rustc.git.orig/src/test/run-pass-valgrind/down-with-thread-dtors.rs
++++++ rustc.git/src/test/run-pass-valgrind/down-with-thread-dtors.rs
+++@@ -8,6 +8,7 @@
+++ // option. This file may not be copied, modified, or distributed
+++ // except according to those terms.
+++
++++// ignore-aarch64
+++ // no-prefer-dynamic
+++
+++ thread_local!(static FOO: Foo = Foo);
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Ignore atomic-lock-free tests on armhf
+++Author: Ximin Luo <infinity0@debian.org>
+++Bug: https://github.com/rust-lang/rust/issues/40238
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++--- a/src/test/run-make/atomic-lock-free/Makefile
++++++ b/src/test/run-make/atomic-lock-free/Makefile
+++@@ -5,6 +5,7 @@
+++
+++ all:
+++ ifeq ($(UNAME),Linux)
++++ifeq (,$(filter armv7-unknown-linux-gnueabihf,$(CFG_TARGET)))
+++ ifeq ($(filter x86,$(LLVM_COMPONENTS)),x86)
+++ $(RUSTC) --target=i686-unknown-linux-gnu atomic_lock_free.rs
+++ nm "$(TMPDIR)/libatomic_lock_free.rlib" | grep -vq __atomic_fetch_add
+++@@ -40,3 +41,4 @@
+++ nm "$(TMPDIR)/libatomic_lock_free.rlib" | grep -vq __atomic_fetch_add
+++ endif
+++ endif
++++endif
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Disable some relocation-model tests for armhf
+++Author: Ximin Luo <infinity0@debian.org>
+++Bug: https://github.com/rust-lang/rust/issues/40145
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++--- a/src/test/run-make/relocation-model/Makefile
++++++ b/src/test/run-make/relocation-model/Makefile
+++@@ -1,17 +1,22 @@
+++ -include ../tools.mk
+++
+++ all: others
++++ifneq ($(filter arm,$(LLVM_COMPONENTS)),arm)
++++# FIXME(#40145)
+++ $(RUSTC) -C relocation-model=dynamic-no-pic foo.rs
+++ $(call RUN,foo)
+++
+++ $(RUSTC) -C relocation-model=default foo.rs
+++ $(call RUN,foo)
+++-
++++endif
+++ $(RUSTC) -C relocation-model=dynamic-no-pic --crate-type=dylib foo.rs --emit=link,obj
+++
+++ ifdef IS_MSVC
+++ # FIXME(#28026)
+++ others:
++++else ifeq ($(filter arm,$(LLVM_COMPONENTS)),arm)
++++# FIXME(#40145)
++++others:
+++ else
+++ others:
+++ $(RUSTC) -C relocation-model=static foo.rs
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Disable reference.md "Items_and_attributes_15" doctest, failing on armhf
+++ This passes on i386 amd64 arm64
+++ .
+++ See https://gist.github.com/infinity0/2f5452d4ee9deb2f1bacb8b39c987c9c
+++ for thread stacktrace from 1.10.0 when it hung instead of failed; eddyb from
+++ #rustc suggested this might be an LLVM issue.
+++Author: Ximin Luo <infinity0@debian.org>
+++Bug: https://github.com/rust-lang/rust/issues/40260
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++Index: rustc.git/src/doc/reference.md
+++===================================================================
+++--- rustc.git.orig/src/doc/reference.md
++++++ rustc.git/src/doc/reference.md
+++@@ -1133,7 +1133,7 @@ bodies defined in Rust code _can be call
+++ in the same way as any other Rust function, except that they have the `extern`
+++ modifier.
+++
+++-```
++++```{.ignore}
+++ // Declares an extern fn, the ABI defaults to "C"
+++ extern fn new_i32() -> i32 { 0 }
+++
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Disable failing test on armhf, fails with signal 7
+++Author: Ximin Luo <infinity0@debian.org>
+++Bug: https://github.com/rust-lang/rust/issues/40444
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++--- a/src/test/run-pass/packed-struct-vec.rs
++++++ b/src/test/run-pass/packed-struct-vec.rs
+++@@ -8,6 +8,8 @@
+++ // option. This file may not be copied, modified, or distributed
+++ // except according to those terms.
+++
++++// ignore-arm
++++
+++ use std::mem;
+++
+++ #[repr(packed)]
--- /dev/null
--- /dev/null
--- /dev/null
+++Index: rustc.git/src/test/run-make/no-duplicate-libs/main.rs
+++===================================================================
+++--- rustc.git.orig/src/test/run-make/no-duplicate-libs/main.rs
++++++ rustc.git/src/test/run-make/no-duplicate-libs/main.rs
+++@@ -8,6 +8,8 @@
+++ // option. This file may not be copied, modified, or distributed
+++ // except according to those terms.
+++
++++// ignore-test
++++
+++ #[link(name = "foo")]
+++ #[link(name = "bar")]
+++ #[link(name = "foo")]
+++Index: rustc.git/src/test/run-make/no-duplicate-libs/Makefile
+++===================================================================
+++--- rustc.git.orig/src/test/run-make/no-duplicate-libs/Makefile
++++++ rustc.git/src/test/run-make/no-duplicate-libs/Makefile
+++@@ -5,8 +5,8 @@ ifdef IS_MSVC
+++ all:
+++ else
+++ all:
+++- $(RUSTC) foo.rs
+++- $(RUSTC) bar.rs
+++- $(RUSTC) main.rs
+++- $(call RUN,main)
++++# $(RUSTC) foo.rs
++++# $(RUSTC) bar.rs
++++# $(RUSTC) main.rs
++++# $(call RUN,main)
+++ endif
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Disable jemalloc tests and on s390x
+++Author: Ximin Luo <infinity0@debian.org>
+++Applied-Upstream: commit:1a2ed98d344b6cbddc57db8841b42f935877e08d
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++Index: rust/src/librustc_back/target/s390x_unknown_linux_gnu.rs
+++===================================================================
+++--- rust.orig/src/librustc_back/target/s390x_unknown_linux_gnu.rs 2017-02-26 18:08:22.891629489 +0100
++++++ rust/src/librustc_back/target/s390x_unknown_linux_gnu.rs 2017-02-26 18:08:22.887629473 +0100
+++@@ -19,6 +19,8 @@
+++ // Pass the -vector feature string to LLVM to respect this assumption.
+++ base.features = "-vector".to_string();
+++ base.max_atomic_width = Some(64);
++++ // see #36994
++++ base.exe_allocation_crate = "alloc_system".to_string();
+++
+++ Ok(Target {
+++ llvm_target: "s390x-unknown-linux-gnu".to_string(),
+++Index: rust/src/test/compile-fail/allocator-rust-dylib-is-jemalloc.rs
+++===================================================================
+++--- rust.orig/src/test/compile-fail/allocator-rust-dylib-is-jemalloc.rs 2017-02-26 18:08:22.891629489 +0100
++++++ rust/src/test/compile-fail/allocator-rust-dylib-is-jemalloc.rs 2017-02-26 18:08:22.887629473 +0100
+++@@ -29,9 +29,11 @@
+++ // ensure we get the same error.
+++ //
+++ // So long as we CI linux/OSX we should be good.
+++-#[cfg(any(target_os = "linux", target_os = "macos"))]
++++#[cfg(any(all(target_os = "linux", any(target_arch = "x86", target_arch = "x86_64")),
++++ target_os = "macos"))]
+++ extern crate alloc_system;
+++-#[cfg(not(any(target_os = "linux", target_os = "macos")))]
++++#[cfg(not(any(all(target_os = "linux", any(target_arch = "x86", target_arch = "x86_64")),
++++ target_os = "macos")))]
+++ extern crate allocator1;
+++
+++ fn main() {
+++Index: rust/src/test/run-pass/allocator-default.rs
+++===================================================================
+++--- rust.orig/src/test/run-pass/allocator-default.rs 2017-02-26 18:08:22.891629489 +0100
++++++ rust/src/test/run-pass/allocator-default.rs 2017-02-26 18:08:22.887629473 +0100
+++@@ -10,7 +10,8 @@
+++
+++ #![feature(alloc_jemalloc)]
+++
+++-#[cfg(any(target_os = "linux", target_os = "macos"))]
++++#[cfg(any(all(target_os = "linux", any(target_arch = "x86", target_arch = "x86_64")),
++++ target_os = "macos"))]
+++ extern crate alloc_jemalloc;
+++
+++ fn main() {
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Ignore ASM tests on powerpc
+++Author: Erwan Prioul <erwan@linux.vnet.ibm.com>
+++Applied-Upstream: commit:1572bf104dbf65d58bd6b889fa46229c9b92d6f9
+++
+++diff -Naur a/src/test/compile-fail/asm-bad-clobber.rs b/src/test/compile-fail/asm-bad-clobber.rs
+++--- a/src/test/compile-fail/asm-bad-clobber.rs 2017-02-17 10:21:15.192001150 +0000
++++++ b/src/test/compile-fail/asm-bad-clobber.rs 2017-02-20 10:53:33.355996252 +0000
+++@@ -12,6 +12,7 @@
+++ // ignore-arm
+++ // ignore-aarch64
+++ // ignore-s390x
++++// ignore-powerpc
+++
+++ #![feature(asm, rustc_attrs)]
+++
+++diff -Naur a/src/test/compile-fail/asm-in-bad-modifier.rs b/src/test/compile-fail/asm-in-bad-modifier.rs
+++--- a/src/test/compile-fail/asm-in-bad-modifier.rs 2017-02-17 10:21:15.040001150 +0000
++++++ b/src/test/compile-fail/asm-in-bad-modifier.rs 2017-02-20 10:53:55.139999754 +0000
+++@@ -9,6 +9,7 @@
+++ // except according to those terms.
+++
+++ // ignore-s390x
++++// ignore-powerpc
+++
+++ #![feature(asm)]
+++
+++diff -Naur a/src/test/compile-fail/asm-misplaced-option.rs b/src/test/compile-fail/asm-misplaced-option.rs
+++--- a/src/test/compile-fail/asm-misplaced-option.rs 2017-02-17 10:21:16.120001149 +0000
++++++ b/src/test/compile-fail/asm-misplaced-option.rs 2017-02-20 10:54:33.619839143 +0000
+++@@ -12,6 +12,7 @@
+++ // ignore-arm
+++ // ignore-aarch64
+++ // ignore-s390x
++++// ignore-powerpc
+++
+++ #![feature(asm, rustc_attrs)]
+++
+++diff -Naur a/src/test/compile-fail/asm-out-assign-imm.rs b/src/test/compile-fail/asm-out-assign-imm.rs
+++--- a/src/test/compile-fail/asm-out-assign-imm.rs 2017-02-17 10:21:14.804001149 +0000
++++++ b/src/test/compile-fail/asm-out-assign-imm.rs 2017-02-20 10:55:26.796023677 +0000
+++@@ -9,6 +9,7 @@
+++ // except according to those terms.
+++
+++ // ignore-s390x
++++// ignore-powerpc
+++
+++ #![feature(asm)]
+++
+++diff -Naur a/src/test/compile-fail/asm-out-no-modifier.rs b/src/test/compile-fail/asm-out-no-modifier.rs
+++--- a/src/test/compile-fail/asm-out-no-modifier.rs 2017-02-17 10:21:12.548001149 +0000
++++++ b/src/test/compile-fail/asm-out-no-modifier.rs 2017-02-20 10:55:37.908025746 +0000
+++@@ -9,6 +9,7 @@
+++ // except according to those terms.
+++
+++ // ignore-s390x
++++// ignore-powerpc
+++
+++ #![feature(asm)]
+++
+++diff -Naur a/src/test/compile-fail/asm-out-read-uninit.rs b/src/test/compile-fail/asm-out-read-uninit.rs
+++--- a/src/test/compile-fail/asm-out-read-uninit.rs 2017-02-17 10:21:12.968001149 +0000
++++++ b/src/test/compile-fail/asm-out-read-uninit.rs 2017-02-20 10:55:49.260001428 +0000
+++@@ -9,6 +9,7 @@
+++ // except according to those terms.
+++
+++ // ignore-s390x
++++// ignore-powerpc
+++
+++ #![feature(asm)]
+++
--- /dev/null
--- /dev/null
--- /dev/null
+++Description: Set the timestamp of downloaded stage0 files
+++ This allows make_orig-dl_tarball.sh to be reproducible
+++Author: Ximin Luo <infinity0@debian.org>
+++Forwarded: TODO
+++---
+++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+++Index: rustc.git/src/bootstrap/bootstrap.py
+++===================================================================
+++--- rustc.git.orig/src/bootstrap/bootstrap.py
++++++ rustc.git/src/bootstrap/bootstrap.py
+++@@ -72,7 +72,7 @@ def download(path, url, probably_big, ve
+++ option = "-#"
+++ else:
+++ option = "-s"
+++- run(["curl", option, "-Sf", "-o", path, url], verbose=verbose)
++++ run(["curl", "-R", option, "-Sf", "-o", path, url], verbose=verbose)
+++
+++
+++ def verify(path, sha_path, verbose):
--- /dev/null
--- /dev/null
--- /dev/null
+++#!/usr/bin/make -f
+++# -*- makefile -*-
+++
+++include /usr/share/dpkg/pkg-info.mk
+++include /usr/share/dpkg/architecture.mk
+++include /usr/share/dpkg/buildflags.mk
+++#RUSTFLAGS = -C link-args="$(LDFLAGS)"
+++# temporary workaround for https://github.com/rust-lang/rust/issues/31529
+++# this will FAIL if LDFLAGS itself contains shell-interpreted chars beyond
+++# unquoted spaces (that addprefix works around the failure of)
+++RUSTFLAGS = $(addprefix -C link-args=,$(LDFLAGS))
+++export CFLAGS CXXFLAGS CPPFLAGS LDFLAGS RUSTFLAGS
+++
+++# see https://github.com/rust-lang/rust/issues/37320
+++# it should be possible to remove this in the next Debian release
+++export MALLOC_CONF = lg_dirty_mult:-1
+++
+++# Defines DEB_*_RUST_TYPE triples
+++include debian/architecture.mk
+++
+++# Uncomment this to turn on verbose mode.
+++#export DH_VERBOSE=1
+++
+++# When using sudo pbuilder, this will cause mk/install.mk to run sudo,
+++# but we don't need sudo as a build-dep for the package if we unexport
+++# the SUDO_USER variable.
+++unexport SUDO_USER
+++
+++# src/rt/miniz.c (incorrectly) triggers -Wmisleading-indentation with
+++# gcc-6. See bug #811573.
+++CFLAGS += -Wno-misleading-indentation
+++
+++# Release type (one of beta, stable or nightly)
+++RELEASE_CHANNEL := stable
+++# See also ./build-preview-dsc.sh for a script that builds a beta/nightly .dsc
+++# out of this packaging. Furthermore, if the build breaks after importing a new
+++# upstream stable release, check the do_temporary_fixup function in that file
+++# to see if we already know what fix to make.
+++
+++DEB_DESTDIR := $(CURDIR)/debian/tmp
+++
+++RUST_VERSION := $(shell dpkg-parsechangelog --show-field Version | sed -re 's/([^.]+)\.([^.]+)\..*/\1.\2/')
+++LIBSTD_PKG := libstd-rust-$(RUST_VERSION)
+++
+++# These are the normal build flags
+++DEB_CONFIGURE_FLAGS = \
+++ --host=$(DEB_HOST_RUST_TYPE) \
+++ --target=$(DEB_TARGET_RUST_TYPE) \
+++ --disable-manage-submodules \
+++ --disable-rustbuild \
+++ --release-channel=$(RELEASE_CHANNEL) \
+++ --prefix=/usr
+++
+++# Use system LLVM (comment out to use vendored LLVM)
+++OLD_LLVM_VERSION = 3.8
+++DEB_CONFIGURE_FLAGS += --llvm-root=/usr/lib/llvm-3.9
+++
+++# Below we detect how we're supposed to bootstrap the stage0 compiler. See
+++# README.Debian for more details of the cases described below.
+++#
+++# Sed expression that matches the "rustc" we have in our Build-Depends field
+++SED_RUSTC_BUILDDEP := /^Build-Depends:/,/^[^[:space:]\#]/{/\s*rustc.*,/$$action}
+++PRECONFIGURE_CHECK = :
+++HAVE_BINARY_TARBALL := $(shell ls -1 dl/*$(DEB_HOST_RUST_TYPE)* 2>/dev/null | wc -l)
+++# allow not using the binary tarball although it exists
+++#ifneq (,$(filter $(DEB_HOST_ARCH), amd64 arm64 armhf i386 powerpc ppc64el s390x))
+++# HAVE_BINARY_TARBALL := 0
+++#endif
+++ifeq (0,$(HAVE_BINARY_TARBALL))
+++ # Case A (Building from source): the extracted source tree does not include
+++ # a bootstrapping tarball for the current architecture e.g. because the
+++ # distro already has a rustc for this arch, or the uploader expects that
+++ # this requirement be fulfilled in some other way.
+++ #
+++ # Case A-1: the builder did not select the "pkg.rustc.dlstage0" build profile.
+++ # In this case, we use the distro's rustc - either the previous or current version.
+++ ifeq (,$(findstring pkg.rustc.dlstage0,$(DEB_BUILD_PROFILES)))
+++ DEB_CONFIGURE_FLAGS += --enable-local-rust --local-rust-root=/usr
+++ endif
+++ #
+++ # Case A-2: the builder selected the "dlstage0" build profile.
+++ # In this case, the rust build scripts will download a stage0 into dl/ and use that.
+++ # We don't need to do anything specific in this build file, so this case is empty.
+++else
+++ # Case B (Bootstrapping a new distro): the extracted source tree does
+++ # include a bootstrapping tarball for the current architecture; see the
+++ # `source_orig-dl` target below on how to build this.
+++ #
+++ # In this case, we'll bootstrap from the stage0 given in that tarball.
+++ # To ensure the uploader of the .dsc didn't make a mistake, we first check
+++ # that rustc isn't a Build-Depends for the current architecture.
+++ ifneq (,$(shell action=p; sed -ne "$(SED_RUSTC_BUILDDEP)" debian/control))
+++ ifeq (,$(shell action=p; sed -ne "$(SED_RUSTC_BUILDDEP)" debian/control | grep '!$(DEB_HOST_ARCH)'))
+++ PRECONFIGURE_CHECK = $(error found matches for dl/*$(DEB_HOST_RUST_TYPE)*, \
+++ but rustc might be a Build-Depends for $(DEB_HOST_ARCH))
+++ endif
+++ endif
+++endif
+++
+++BUILD_DOCS = 1
+++ifneq (,$(findstring nodoc,$(DEB_BUILD_PROFILES)))
+++ DEB_CONFIGURE_FLAGS += --disable-docs
+++ BUILD_DOCS =
+++endif
+++
+++ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+++ DEB_CONFIGURE_FLAGS += --disable-optimize --disable-optimize-cxx --disable-optimize-llvm
+++endif
+++
+++# Workaround for powerpc64le: no optimization
+++# TODO: can remove when https://github.com/rust-lang/rust/issues/39015 is fixed
+++ifneq (,$(findstring powerpc64le,$(DEB_TARGET_RUST_TYPE)))
+++ DEB_CONFIGURE_FLAGS += --disable-optimize --disable-optimize-cxx --disable-optimize-llvm
+++endif
+++
+++
+++%:
+++ dh $@ --parallel
+++
+++# Note: SHELL is not set by dash, but the configure script wants to use it
+++override_dh_auto_configure:
+++ # fail the build if we have any instances of OLD_LLVM_VERSION in debian, except for debian/changelog
+++ ! grep --color=always -i 'll...$(OLD_LLVM_VERSION)' --exclude=changelog -R debian
+++ $(PRECONFIGURE_CHECK)
+++ SHELL=/bin/sh PATH="$$PWD/debian/bin:$$PATH" DEB_HOST_ARCH="$(DEB_HOST_ARCH)" \
+++ ./configure $(DEB_CONFIGURE_FLAGS)
+++
+++override_dh_auto_clean:
+++ set -e; \
+++ if [ -f Makefile ]; then \
+++ $(MAKE) clean-all; \
+++ $(RM) Makefile config.stamp config.mk; \
+++ fi
+++ $(RM) src/rt/hoedown/src/html_blocks.c # clean up after building this ourselves
+++ $(RM) src/bootstrap/bootstrap.pyc
+++
+++# upstream bundles this in the source, but in Debian we rebuild everything yo
+++generate-sources:
+++ $(MAKE) -C src/rt/hoedown src/html_blocks.c
+++
+++override_dh_auto_build-arch: generate-sources
+++ dh_auto_build -- all VERBOSE=1
+++
+++# note: this is only for buildds that want to do a separate arch:all build;
+++# there is no point running this yourself "to save time" since it implicitly
+++# depends on build-arch anyways.
+++override_dh_auto_build-indep: generate-sources
+++ifneq (,$(BUILD_DOCS))
+++ dh_auto_build -- docs VERBOSE=1
+++endif
+++
+++override_dh_auto_install:
+++ dh_auto_install --destdir=$(DEB_DESTDIR)
+++
+++ mkdir -p $(DEB_DESTDIR)/usr/lib/$(DEB_HOST_MULTIARCH)/
+++ mv $(DEB_DESTDIR)/usr/lib/lib*.so $(DEB_DESTDIR)/usr/lib/$(DEB_HOST_MULTIARCH)/
+++
+++ # Replace duplicated compile-time/run-time dylibs with symlinks
+++ @set -e; \
+++ for f in $(DEB_DESTDIR)/usr/lib/rustlib/$(DEB_HOST_RUST_TYPE)/lib/lib*.so; do \
+++ name=$${f##*/}; \
+++ if [ -f "$(DEB_DESTDIR)/usr/lib/$(DEB_HOST_MULTIARCH)/$$name" ]; then \
+++ echo "ln -sf ../../../$(DEB_HOST_MULTIARCH)/$$name $$f"; \
+++ ln -sf ../../../$(DEB_HOST_MULTIARCH)/$$name $$f; \
+++ fi; \
+++ done
+++
+++ifneq (,$(BUILD_DOCS))
+++ # Brute force to remove privacy-breach-logo lintian warning.
+++ # We could have updated the upstream sources but it would complexify
+++ # the rebase
+++ @set -e; \
+++ find $(DEB_DESTDIR)/usr/share/doc/rust/html -iname '*.html' | \
+++ while read file; do \
+++ topdir=$$(echo "$$file" | sed 's,^$(DEB_DESTDIR)/usr/share/doc/rust/html/,,; s,/[^/]*$$,/,; s,^[^/]*$$,,; s,[^/]\+/,../,g'); \
+++ sed -i -e "s,https://doc.rust-lang.org/\(favicon.ico\|logos/rust-logo-32x32-blk.png\),$${topdir}rust-logo-32x32-blk.png," \
+++ -e "s,https://www.rust-lang.org/\(favicon.ico\|logos/rust-logo-32x32-blk.png\),$${topdir}rust-logo-32x32-blk.png," "$$file"; \
+++ done
+++ find $(DEB_DESTDIR) \( -iname '*.html' -empty -o -name .lock -o -name '*.inc' \) -delete
+++endif
+++
+++override_dh_install-arch:
+++ dh_install
+++ dh_install -p$(LIBSTD_PKG) usr/lib/$(DEB_HOST_MULTIARCH)/
+++
+++override_dh_install-indep:
+++ dh_install
+++ chmod -x \
+++ debian/rust-gdb/usr/share/rust-gdb/*.py \
+++ debian/rust-lldb/usr/share/rust-lldb/*.py
+++
+++override_dh_installchangelogs:
+++ dh_installchangelogs RELEASES.md
+++
+++override_dh_installdocs:
+++ dh_installdocs -X.tex -X.aux -X.log -X.out -X.toc
+++
+++override_dh_compress:
+++ dh_compress -X.woff
+++
+++override_dh_auto_test-arch:
+++ifeq (, $(filter nocheck,$(DEB_BUILD_OPTIONS)))
+++# Use non-parallel $(MAKE) here instead of dh_auto_test, otherwise the upstream
+++# Makefile will try to run N instances of the testrunner each of which will run
+++# N instances of rustc (there is also parallel logic in libtest.rs already).
+++ RUST_BACKTRACE=1 $(MAKE) VERBOSE=1 check
+++endif
+++
+++# No tests are applicable when only building arch:all packages.
+++# More specifically: when we do an arch-all build, some crates are not built.
+++# This makes some arch-dependent tests fail, so don't run them here.
+++override_dh_auto_test-indep:
+++ true
+++
+++override_dh_makeshlibs:
+++ dh_makeshlibs -V
+++
+++ # dh_makeshlibs doesn't support our "libfoo-version.so" naming
+++ # structure, so we have to do this ourselves.
+++ install -o 0 -g 0 -d debian/$(LIBSTD_PKG)/DEBIAN
+++ LC_ALL=C ls debian/$(LIBSTD_PKG)/usr/lib/$(DEB_HOST_MULTIARCH)/lib*.so | \
+++ sed -n 's,^.*/\(lib.*\)-\(.\+\)\.so$$,\1 \2,p' | \
+++ while read name version; do \
+++ echo "$$name $$version $(LIBSTD_PKG) (>= $(DEB_VERSION_UPSTREAM))"; \
+++ done > debian/$(LIBSTD_PKG)/DEBIAN/shlibs
+++ chmod 644 debian/$(LIBSTD_PKG)/DEBIAN/shlibs
+++ chown 0:0 debian/$(LIBSTD_PKG)/DEBIAN/shlibs
+++
+++override_dh_shlibdeps:
+++ dh_shlibdeps -- -x$(LIBSTD_PKG)
+++
+++QUILT_SPECIAL_SNOWFLAKE_RETURN_CODE = x=$$?; if [ $$x = 2 ]; then exit 0; else exit $$x; fi
+++source_orig-dl:
+++ QUILT_PATCHES=debian/patches quilt push -aq; $(QUILT_SPECIAL_SNOWFLAKE_RETURN_CODE)
+++ $(MAKE) -f debian/rules clean
+++ debian/make_orig-dl_tarball.sh
+++ QUILT_PATCHES=debian/patches quilt pop -aq; $(QUILT_SPECIAL_SNOWFLAKE_RETURN_CODE)
+++ rm -rf .pc
--- /dev/null
--- /dev/null
--- /dev/null
+++Document: rust-book
+++Title: The Rust Programming Language
+++Section: Programming/Rust
+++Abstract:
+++ This book will teach you about the Rust Programming Language. Rust is
+++ a modern systems programming language focusing on safety and speed. It
+++ accomplishes these goals by being memory safe without using garbage
+++ collection.
+++
+++Format: HTML
+++Index: /usr/share/doc/rust-doc/html/book/index.html
+++Files: /usr/share/doc/rust-doc/html/book/*.html
--- /dev/null
--- /dev/null
--- /dev/null
+++Document: rust-intro
+++Title: The Rust Guide
+++Section: Programming/Rust
+++Abstract:
+++ This introduction will give you a rough idea of what Rust is like,
+++ eliding many details.
+++
+++Format: HTML
+++Index: /usr/share/doc/rust-doc/html/intro.html
+++Files: /usr/share/doc/rust-doc/html/intro.html
--- /dev/null
--- /dev/null
--- /dev/null
+++Document: rust-reference
+++Title: The Rust Reference
+++Section: Programming/Rust
+++Abstract:
+++ This document is the primary reference for the Rust programming
+++ language.
+++
+++Format: HTML
+++Index: /usr/share/doc/rust-doc/html/reference.html
+++Files: /usr/share/doc/rust-doc/html/reference.html
--- /dev/null
--- /dev/null
--- /dev/null
+++debian/tmp/usr/share/doc/rust/html
--- /dev/null
--- /dev/null
--- /dev/null
+++debian/icons/rust-logo-32x32-blk.png usr/share/doc/rust-doc/html/
--- /dev/null
--- /dev/null
--- /dev/null
+++# This should eventually become part of a dh_rustdoc program.
+++# Something that does e.g.
+++# find $(DESTDIR) -name jquery.js -execdir ln -sf -T \
+++# /usr/share/doc/rust-doc/html/jquery.js '{}' \;
+++usr/share/javascript/jquery/jquery.js usr/share/doc/rust-doc/html/jquery.js
--- /dev/null
--- /dev/null
--- /dev/null
+++src/etc/rust-gdb usr/bin/
+++src/etc/gdb_*.py usr/share/rust-gdb/
+++src/etc/debugger_pretty_printers_common.py usr/share/rust-gdb/
--- /dev/null
--- /dev/null
--- /dev/null
+++usr/share/man/man1/gdb.1.gz usr/share/man/man1/rust-gdb.1.gz
--- /dev/null
--- /dev/null
--- /dev/null
+++src/etc/rust-lldb usr/bin/
+++src/etc/lldb_rust_formatters.py usr/share/rust-lldb/
+++src/etc/debugger_pretty_printers_common.py usr/share/rust-lldb/
--- /dev/null
--- /dev/null
--- /dev/null
+++usr/share/man/man1/lldb-3.9.1.gz usr/share/man/man1/rust-lldb.1.gz
--- /dev/null
--- /dev/null
--- /dev/null
+++usr/bin/rustc
+++usr/bin/rustdoc
+++debian/architecture.mk usr/share/rustc/
--- /dev/null
--- /dev/null
--- /dev/null
+++# We need it for now
+++binary-or-shlib-defines-rpath usr/bin/rustc /usr/lib/rustlib/*/lib
+++binary-or-shlib-defines-rpath usr/bin/rustdoc /usr/lib/rustlib/*/lib
--- /dev/null
--- /dev/null
--- /dev/null
+++debian/tmp/usr/share/man/man1/rustc.1
+++debian/tmp/usr/share/man/man1/rustdoc.1
+++
--- /dev/null
--- /dev/null
--- /dev/null
+++3.0 (quilt)
--- /dev/null
--- /dev/null
--- /dev/null
+++debian/icons/rust-logo-32x32-blk.png
+++# if you are here because dpkg-source told you to "add dl/rustc-** in d/source/include-binaries",
+++# ignore that instruction and instead:
+++# a) if you want to use the orig-dl for your next upload, then extract it into dl/
+++# b) if you don't want to use it, then rename "../rustc_${version}.orig-dl.tar.xz" to something else
+++# see also d/source/options and d/source/local-options and #577113.
--- /dev/null
--- /dev/null
--- /dev/null
+++# this helps to prevent accidentally including the orig-dl tarball in a non
+++# orig-dl upload, after running `debian/rules source_orig-dl`.
+++# we can get rid of this after #577113 is fixed
+++include-removal
--- /dev/null
--- /dev/null
--- /dev/null
+++#!/bin/bash
+++prev_stable() {
+++local V=$1
+++python -c 'import sys; k=map(int,sys.argv[1].split(".")); k[1]-=1; print ".".join(map(str,k))' "$V"
+++}
+++
+++update() {
+++local ORIG=$1 NEW=$2
+++
+++ORIG_M1=$(prev_stable $ORIG)
+++NEW_M1=$(prev_stable $NEW)
+++ORIG_R="${ORIG/./\\.}" # match a literal dot, otherwise this might sometimes match e.g. debhelper (>= 9.20141010)
+++
+++sed -i -e "s|libstd-rust-${ORIG_R}|libstd-rust-$NEW|g" \
+++ -e "s|rustc (<= ${ORIG_R}|rustc (<= $NEW|g" \
+++ -e "s|rustc (>= ${ORIG_M1/./\\.}|rustc (>= ${NEW_M1}|g" control
+++
+++git mv libstd-rust-$ORIG.lintian-overrides libstd-rust-$NEW.lintian-overrides
+++sed -i -e "s|libstd-rust-${ORIG_R}|libstd-rust-$NEW|g" libstd-rust-$NEW.lintian-overrides
+++}
+++
+++update 1.14 1.15
--- /dev/null
--- /dev/null
--- /dev/null
+++-----BEGIN PGP PUBLIC KEY BLOCK-----
+++Version: GnuPG v1
+++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+++=5FXw
+++-----END PGP PUBLIC KEY BLOCK-----
--- /dev/null
--- /dev/null
--- /dev/null
+++version=4
+++
+++opts="\
+++pgpsigurlmangle=s/$/.asc/,\
+++uversionmangle=s/(\d)[_.+-]?((beta|alpha)\.?\d*)$/$1~$2/,\
+++dversionmangle=s/\+dfsg\d*$//,\
+++repack,\
+++repacksuffix=+dfsg1,\
+++compression=xz,\
+++" \
+++ https://www.rust-lang.org/en-US/other-installers.html \
+++ (?:.*/)rustc?-(\d[\d.]*(?:-[\w.]+)?)-src\.tar\.gz
--- /dev/null
--- /dev/null
--- /dev/null
+++12d91c29e0bfc47168bf801a19153e91dbe6fac37dd47884a8268ba7477ef3ea rustc-1.14.0-armv7-unknown-linux-gnueabihf.tar.gz
--- /dev/null
--- /dev/null
--- /dev/null
+++1a7710324bd6508aa04d6a279e38ed8e8ea096edb2aceb600cf1843f8d161af3 rustc-1.14.0-powerpc64le-unknown-linux-gnu.tar.gz
projects / rustc.git / commitdiff
