[dgit import tarball u-boot 2015.10+dfsg1-4+rpi1 u-boot_2015.10+dfsg1-4+rpi1.debian.tar.xz]
--- /dev/null
+#!/bin/sh
+target=$1
+docs="$2"
+subarch_install_file="debian/build/targets.${target}"
+if [ -f "${subarch_install_file}" ]; then
+ cat "${subarch_install_file}"
+fi
+for doc in ${docs} ; do
+ echo ${doc} /usr/share/doc/u-boot-${target}/
+done
--- /dev/null
+#!/bin/sh
+
+target_file=debian/targets
+
+awk '/^[a-z0-9]/{print $2}' ${target_file} | sort -u | while read subarch ; do
+ case ${subarch} in
+ -) package=u-boot ;;
+ *) package=u-boot-${subarch} ;;
+ esac
+ overrides=debian/${package}.lintian-overrides
+
+ cat >${overrides}<<EOF
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+EOF
+
+ sed -n "/^[a-z0-9].*[[:space:]]$subarch[[:space:]]/p" ${target_file} | while read arch subarch2 platform targets ; do
+ echo "${package} [${arch}]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/${platform}/uboot.elf"
+ done >> ${overrides}
+
+ cat >>${overrides}<<EOF
+
+# These bootloaders need to be statically linked.
+EOF
+
+ sed -n "/^[a-z0-9].*[[:space:]]$subarch[[:space:]]/p" ${target_file} | while read arch subarch2 platform targets ; do
+ echo "${package} [${arch}]: statically-linked-binary usr/lib/u-boot/${platform}/uboot.elf"
+ done >> ${overrides}
+
+ cat >>${overrides}<<EOF
+
+${package}: description-synopsis-starts-with-article
+EOF
+
+done
--- /dev/null
+#!/bin/sh
+for file in debian/build/platforms.* ; do
+ subarch=$(echo ${file} | sed -e 's,.*platforms.,,g')
+ case "${subarch}" in
+ -) package=u-boot ;;
+ *) package=u-boot-${subarch} ;;
+ esac
+ echo $(LC_ALL=C sort -u ${file}) | \
+ sed -e 's, ,${Newline},g' \
+ -e 's,^,uboot:platforms=${Newline}Included platforms:${Newline},g' \
+ >> debian/${package}.substvars
+done
--- /dev/null
+u-boot (2015.10+dfsg1-4+rpi1) stretch-staging; urgency=medium
+
+ [changes brought forward from 2014.10+dfsg1-2+rpi1 by Peter Michael Green <plugwash@raspbian.org> at Fri, 28 Nov 2014 06:00:07 +0000]
+ * Don't build versions for various armv7 devices, build rpi version instead.
+
+ -- Raspbian forward porter <root@raspbian.org> Thu, 17 Dec 2015 02:12:51 +0000
+
+u-boot (2015.10+dfsg1-4) unstable; urgency=medium
+
+ * Fix reproducibility issue with targets listed in package descriptions
+ by always sorting using C locale.
+ * u-boot-imx: Updates to novena patches:
+ - Sync with submitted patch for distro_bootcmd support.
+ - Add upstream patch to fix USB support.
+ - Add upstream patch to enable loading u-boot.img from EXT
+ filesystems.
+ * Add upstream patches to fix mkimage support for multi and script
+ images (Closes: #805434).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 08 Dec 2015 08:59:47 -0800
+
+u-boot (2015.10+dfsg1-3) unstable; urgency=medium
+
+ * u-boot-install-targets: Add support to install documentation.
+ * u-boot-exynos: Install README.odroid.
+ * u-boot-rockchip: Install README.rockchip.
+ * u-boot-omap: Install README.nokia_rx51.
+ * Add included platforms to u-boot package descriptions.
+ * u-boot-sunxi: Enable the A10s-OLinuXino-M target. Thanks to Benedikt
+ Wildenhain (Closes: #806151).
+ * u-boot-imx: Add novena patches to include fdtfile variable, and load
+ fdt file into correct address.
+ * u-boot-sunxi: Backport patches from upstream to enable the Lamobo_R1
+ target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 24 Nov 2015 14:14:29 -0800
+
+u-boot (2015.10+dfsg1-2) unstable; urgency=medium
+
+ * Add missing content to u-boot-rockchip package.
+ * Update wandboard and mx6cuboxi patches to use config_distro_bootcmd
+ patches from u-boot-imx.
+ * Patch mx6cuboxi to specify the baudrate in the console setting.
+ * Update BeagleBone Black patches to use config_distro_bootcmd from
+ upstream.
+ * Patch to switch novena to use distro_bootcmd.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 14 Nov 2015 09:22:47 -0600
+
+u-boot (2015.10+dfsg1-2~exp1) experimental; urgency=medium
+
+ * Build rockchip package, with firefly-rk3288 as the initial
+ target. Thanks to Emilio Pozuelo Monfort and Sjoerd Simons.
+ (Closes: #803166).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 02 Nov 2015 07:59:36 -0800
+
+u-boot (2015.10+dfsg1-1) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * New upstream version.
+ * Remove patch to fix variation caused by timezone differences, applied
+ upstream.
+ * Add patch to use a relative path to include the sunxi spl header,
+ which allows mksunxiboot to build on any architecture. Thanks to Ian
+ Campbell for the initial patch!
+ * Add patch from upstream to fix non-Android booting with ramdisk and/or
+ device tree.
+
+ [ Karsten Merker ]
+ * u-boot-sunxi: Enable the A20-Olimex-SOM-EVB target (Closes: #803335).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 29 Oct 2015 13:35:23 -0700
+
+u-boot (2015.10~rc4+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release candidate.
+ * Updated udoo patches and debian/targets, upstream switched to a single
+ target that supports both udoo quad and dual.
+ * u-boot-sunxi: Add Linksprite_pcDuino target (Closes: #799035). Thanks
+ to Robert Hegner for testing!
+ * Refreshed patches for beaglebone black.
+ * Add patch to fix build variation based on timezone, by removing call
+ to "mktime".
+ * debian/copyright: Updated new locations for exynos files.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 30 Sep 2015 12:00:30 -0700
+
+u-boot (2015.10~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Install mkenvimage. Patch from Ubuntu.
+ * Refreshed patches for arndale, beaglebone black, and mx53loco.
+ * Remove reproducibility patch, applied upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 01 Sep 2015 17:10:40 -0500
+
+u-boot (2015.07+dfsg1-1) unstable; urgency=medium
+
+ [ Jochen Sprickerhof ]
+ * u-boot-sunxi: enable Mini-X target (Closes: #787266).
+
+ [ Ian Campbell ]
+ * Add support for Tegra Jetson TK-1 (Closes: #788689)
+
+ [ Vagrant Cascadian ]
+ New upstream version:
+ * mx6cuboxi:
+ - Remove patches applied upstream.
+ - Refresh distro bootcmd patch.
+ * wandboard:
+ - Remove wandboard SPL patch, applied upstream.
+ - Refresh distro bootcmd patch.
+ * beagleboneblack:
+ - Refresh distro bootcmd patch.
+ * udoo_quad:
+ - Refresh support patch.
+ * Drop no-error-on-set-but-unused-variable patch, no longer relevent.
+ * Add patch to ensure that CONFIG_SANDBOX is set when running "make env".
+
+ * Use patch applied upstream to use SOURCE_DATE_EPOCH when set.
+ * debian/rules: Use the Date from debian/changelog to set
+ SOURCE_DATE_EPOCH.
+
+ * Add example fw_env.config for mx6cuboxi (Closes: #786877).
+ * Add example fw_env.config for wandboard.
+
+ * Add Build-Depends on dpkg-dev (>= 1.17.0), as debian/rules uses
+ "dpkg-parsechangelog --show-field" introduced in that
+ version. (Closes: #768099).
+
+ * debian/watch: Update to use ftp server.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 01 Aug 2015 07:29:07 -0700
+
+u-boot (2015.04+dfsg1-2) unstable; urgency=medium
+
+ [ Joost van Zwieten ]
+ * u-boot-exynos: Enable odroid target.
+
+ [ Vagrant Cascadian ]
+ * u-boot-imx/mx6cuboxi:
+ + Add patches to enable HDMI and USB support.
+ + Add patches to fix Ethernet PHY detection.
+ * u-boot-imx/wandboard: Add patch from u-boot-imx to build a single SPL
+ target for all variants.
+
+ [ Robert Nelson ]
+ * u-boot-omap: Include u-boot.img instead of u-boot.bin for igep0020,
+ omap3_beagle and omap4_panda.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 25 May 2015 20:36:37 -0700
+
+u-boot (2015.04+dfsg1-1) experimental; urgency=medium
+
+ [ Ian Campbell ]
+ * u-boot-exynos: Fix conflict between arndale and sunxi spl
+ targets.
+ * u-boot-sunxi: Update sunxi FEL target.
+
+ [ Vagrant Cascadian ]
+ * u-boot-imx:
+ + Add usbarmory target.
+ + Add novena target.
+ + Add patches from u-boot-imx to support Cubox-i and Hummingboard and
+ drop old cubox-i patches.
+ + Add mx6cuboxi target.
+ + mx6cuboxi: Add patch to use config_distro_bootcmd.
+ + wandboard: Add patch to use config_distro_bootcmd and remove old
+ environment patches.
+
+ * u-boot-omap:
+ + am335x_boneblack: Remove patch to set voltage.
+ + am335x_boneblack: Add patch to use config_distro_bootcmd and remove
+ old patches.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 27 Apr 2015 14:54:44 -0700
+
+u-boot (2015.04~rc5+dfsg1-1) experimental; urgency=medium
+
+ [ John Paul Adrian Glaubitz ]
+ * [sh4] Fix FTBFS due to incorrect target names (Closes: #780066).
+
+ [ Vagrant Cascadian ]
+ * [armel] Use "rpi" for the Raspberry pi target, as it was renamed
+ upstream.
+ * [armel] Remove openrd_ultimate target, which fails to build upstream.
+ * [armel] Remove obsolete mmc guruplug and openrd patches.
+ * [armhf] Remove arndale patches, applied upstream.
+ * Fix cross-building of u-boot-tools (Closes: #775614).
+ * [armhf] u-boot-sunxi: Enable A20-OLinuXino_MICRO. Thanks to Arne
+ Ploese for testing!
+ * [armhf] u-boot-sunxi: Enable Linksprite_pcDuino3. Thanks to Patrice Go
+ for testing!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 07 Apr 2015 13:58:39 -0700
+
+u-boot (2015.04~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream:
+ - ti_armv7_common-support_raw_initrd.diff
+ * Refresh patches:
+ - cubox-i/cubox-i-support.diff
+ - mipsel-native-endianness.diff
+ - mx53loco
+ - openrd-mmc.diff
+ - series
+ - wandboard/wandboard-uEnv.txt-bootz-n-fixes.patch
+ - guruplug_mvfs_and_mmc.diff
+ * Add patch to enable USB mass-storage support for the BeagleBone Black:
+ - beagleboneblack/usb-mass-storage.patch
+ * debian/rules: Add get-orig-source target.
+
+ * Disable patches that fail to apply:
+ - cubox-i/imx6-spl-support.diff
+ - arndale/exynos-Enable-config_distro_defaults.h.patch
+ - arndale/exynos5-Use-config_distro_bootcmd.h.patch
+ * Disable cubox-i build target and patches, as it fails to build.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 08 Mar 2015 12:15:59 -0700
+
+u-boot (2014.10+dfsg1-5) unstable; urgency=medium
+
+ [ John Paul Adrian Glaubitz ]
+ * [sh4] Fix FTBFS due to incorrect target names (Closes: #780066).
+
+ [ Vagrant Cascadian ]
+ * [armhf] u-boot-sunxi: Enable A20-OLinuXino_MICRO. Thanks to Arne
+ Ploese for testing!
+ * [armhf] u-boot-sunxi: Enable Linksprite_pcDuino3. Thanks to Patrice Go
+ for testing!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 07 Apr 2015 13:42:30 -0700
+
+u-boot (2014.10+dfsg1-4) unstable; urgency=medium
+
+ [ Karsten Merker ]
+ * Backport support for the LeMaker Banana Pro board (Closes: #779908).
+
+ [ Vagrant Cascadian ]
+ * Update lintian rules for BananaPro and A20-OlinuXino-LIME2.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 08 Mar 2015 11:13:07 -0700
+
+u-boot (2014.10+dfsg1-3) unstable; urgency=medium
+
+ * cubox-i-support.diff: Refresh patch, dropping solidrun.bmp, which
+ causes FTBFS with newer version of patch (Closes: #777518).
+
+ * Add patch to support A20-OLinuXino-LIME2, backported from u-boot
+ 2015.01. Thanks to Karsten Merker for the patch (Closes: #777466).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 21 Feb 2015 13:13:31 -0800
+
+u-boot (2014.10+dfsg1-2.1) unstable; urgency=medium
+
+ * Non-maintainer upload.
+ * debian/patches:
+ - Add sh4-fix-linker-name-prefix.patch to use the proper
+ linker name prefix on sh4. Fixes FTBFS. (Closes: #771747)
+
+ -- John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Thu, 11 Dec 2014 00:00:08 +0100
+
+u-boot (2014.10+dfsg1-2) unstable; urgency=medium
+
+ [ Steve Langasek ]
+ * Resync cubox-i patches with github.
+ - fixes support for booting on the cubox-i2ultra/i2ex.
+ (Closes: #766266)
+
+ [ Vagrant Cascadian ]
+ * wandboard, cubox-i: Add patches to use variables expected by
+ debian-installer bootscript.
+ * cubox-i: Move importing bootenv before loading the boot script, to
+ allow environment variables useful to the boot script to be set.
+ * cubox-i: Run autodetectfdt before attempting to load the boot script.
+ * Split README.Debian by subarchitecture, and document installing u-boot
+ on several additional boards.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 01 Nov 2014 16:33:33 -0700
+
+u-boot (2014.10+dfsg1-1) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * New upstream release.
+ * Refresh cubox-i patches to 2014.10.
+ * Update cubox-i patches to use generic board.
+ * Remove debian/patches/kerma-sheevaplug-mvsata.diff, merged upstream.
+ * Patch to allow tools-only to build without a configuration.
+ * Update Standards-Version to 3.9.6, no changes needed.
+
+ [ Ian Campbell ]
+ * Rebase arndale patches onto 2014.10
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 19 Oct 2014 11:34:39 -0700
+
+u-boot (2014.10~rc3+dfsg1-2) experimental; urgency=medium
+
+ [ Ian Campbell ]
+ * Add support for the Arndale board (Closes: #763186).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 09 Oct 2014 11:41:31 -0700
+
+u-boot (2014.10~rc3+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream:
+ - bootcmd-scsi-scan-before-scsi.patch
+ - sunxi/0001-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch
+ * Refresh patches:
+ - am335x-bootscript.diff
+ - am335x-uenv.txt.diff
+ - cubox-i/cubox-i-support.diff
+ - no-force-CROSS_COMPILE-powerpc.diff
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 08 Oct 2014 09:57:35 -0700
+
+u-boot (2014.10~rc2+dfsg1-2) unstable; urgency=medium
+
+ [ Héctor Orón Martínez ]
+ * Fix cross building.
+ * Build extra tools for kirkwood and sunxi (Closes: #750108).
+ * Build extra tools and env just once, and install in PATH again.
+ * Add nitrogen6q support to u-boot-imx.
+
+ [ Vagrant Cascadian ]
+ * Use "make all" instead of making individual targets, recording a list
+ of targets to install in each subarch package.
+ * Build FEL variants for all sunxi platforms, based on patches from Ian
+ Campbell.
+ * Add build-depends on "bc".
+ * Patch to add the debian revision to the U-boot version.
+ * Updated cubox-i patches and re-enable mx6_cubox-i target.
+ * Build tools and env with NO_SDL=1 to avoid complaining about missing
+ sdl-config.
+ * Remove mips target dbau1100, an old platform with no testers.
+ * Swich qemu_mips target to install u-boot.bin, which is what is
+ actually needed by qemu.
+ * Add patch to Set DCDC1 DDR3 to 1.35V for Beaglebone Black. Thanks to
+ Robert Nelson for the patch.
+
+ [ Ian Campbell ]
+ * Add patch to add u-boot.kwb to "make all" on Kirkwood platforms.
+ * Build tools out-of-tree too so as not to dirty the source used for the
+ actual platforms (Closes: #763024).
+ * Add patch to initialize scsi before trying scsi disks in
+ config_distro_bootcmd (Closes: #764069).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 06 Oct 2014 16:58:04 -0700
+
+u-boot (2014.10~rc2+dfsg1-2~exp1) experimental; urgency=medium
+
+ * Split u-boot package into u-boot-imx, u-boot-omap and u-boot-sunxi
+ packages on armhf.
+
+ * debian/targets:
+ - Enable A10-OLinuXino-Lime target.
+ - Enable Cubieboard2 and Cubieboard2_FEL targets (Closes: #762383).
+ - Enable A20-OLinuXino-LIME target.
+ - Disable mx6_cubox-i
+ - Disable efikamx and efikasb.
+
+ * debian/patches:
+ - Add patch from upstream to support A20-OLinuXino-LIME.
+ - Disable patches for cubox-i.
+
+ * debian/rules:
+ - Remove excess conditional architecture check, drop build-dep on
+ dctrl-tools.
+ - Remove executable bit from u-boot targets.
+
+ * Updated lintian overrides.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 22 Sep 2014 18:30:12 -0500
+
+u-boot (2014.10~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+
+ * Update debian/patches:
+ - Remove Cubieboard and Cubietruck patches, applied upstream.
+ - Remove kerma-sheevaplug-mvsdio patch, applied upstream.
+ - Update openrd-mmc patch, partially applied upstream.
+ - Add patch to workaround failure when building env tools.
+
+ * [armhf] Add Bananapi target.
+
+ * debian/rules:
+ - Install fw_printenv and fw_setenv symlink in platform-specific dir.
+ - Create include/config/auto.conf to allow tools-only target to build.
+ - Update to use defconfig target rather than config target.
+
+ * debian/copyright:
+ - Update Files-Excluded as some files were removed upstream.
+
+ * Updated lintian overrides.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 03 Sep 2014 23:28:59 -0700
+
+u-boot (2014.07+dfsg1-2) unstable; urgency=medium
+
+ [ Steve Langasek ]
+ * Rebase cubox-i patches on 2014.07 and re-enable the target.
+
+ [ Vagrant Cascadian ]
+ * Switch to debhelper 9 with executable .install files.
+ * Remove the efikamx and efikasb targets.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 14 Sep 2014 23:01:50 -0500
+
+u-boot (2014.07+dfsg1-1) unstable; urgency=medium
+
+ * New upstream version.
+ * [armhf] Temporarily disable cubox-i target, which needs re-working for
+ new upstream version.
+ * Refresh Cubietruck and Cubieboard patches.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 28 Aug 2014 12:22:06 -0700
+
+u-boot (2014.07~rc4+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Updated patches for sheevaplug MMC and SATA support.
+ * Updated openrd patches to use MMC driver.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 12 Jul 2014 17:24:51 -0700
+
+u-boot (2014.04+dfsg1-3) unstable; urgency=medium
+
+ * Add patch for mx53loco that enables support for ext4, the "load" command,
+ and using bootz with raw initrds.
+ * Remove ZUMA platform and drop powerpc from u-boot architectures
+ (Closes: #754610).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 28 Jul 2014 15:30:26 -0700
+
+u-boot (2014.04+dfsg1-2) unstable; urgency=medium
+
+ * Enable udoo_quad target, with patch improving the udoo_quad boot
+ environment. Thanks to Michael Fladischer! (Closes: #753376).
+ * Enable Cubieboard target and patches.
+ * Update lintian overrides.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 09 Jul 2014 12:37:12 -0700
+
+u-boot (2014.04+dfsg1-1) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * Repack upstream tarball to remove files containing firmware without
+ sources (Closes: #750912).
+
+ * Add patches for Cubietruck from upstream.
+ * Add Cubietruck and Cubietruck_FEL targets (Closes: #750473).
+
+ * Add support for bootscripts to BeagleBone Black.
+ - Support loading files from either first or second partition.
+
+ * Modified wandboard patches:
+ - Add support for bootscripts.
+ - Support both fat and ext filesystems by consistantly using the "load"
+ command.
+ - Try loading bootscript from /boot/ as a fallback if not found in /.
+
+ * Update debian/copyright to use copyright format 1.0.
+ - Document which files are removed in debian/copyright.
+ * Update debian/watch to handle +dfsg version.
+ * Update lintian overrides:
+ - Ignore 'u-boot: statically-linked-binary'.
+ - Include new u-boot targets.
+
+ [ Andreas Henriksson ]
+ * Add patches for sunxi AHCI driver (Cubietruck) (Closes: #750473).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 15 Jun 2014 21:03:40 -0700
+
+u-boot (2014.04-2) unstable; urgency=medium
+
+ * Fix FTBFS on powerpc by not setting CROSS_COMPILE when empty.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 26 May 2014 11:32:49 -0700
+
+u-boot (2014.04-1) unstable; urgency=low
+
+ [ Steve Langasek ]
+ * Patches taken from https://github.com/rabeeh/u-boot-imx6.git to support
+ the SolidRun CuBox-i series:
+ - debian/patches/spl-sata-support.diff:
+ Add support for SATA in SPL mode
+ - debian/patches/imx6-spl-support.diff:
+ Add support for SPL on i.MX6-based systems
+ - debian/patches/cubox-support.diff, tools/logos/solidrun.bmp:
+ Add support for the CuBox-i.
+ * Build the mx6_cubox-i target (Closes: #741127).
+
+ [ Vagrant Cascadian ]
+ * Add Nokia nokia_rx51 (n900) to targets to build.
+ - Patch n900 build to support bootz and raw initrds.
+ * debian/rules: Fix building of targets for v2014.04.
+ - Move fw_printenv creation into board-specific targets.
+ - Build target "tools-only".
+ - Drop special-casing of MLO, add MLO to debian/targets.
+ * debian/patches/cubox-i-raw-initrd.diff:
+ - Patch to support raw initrd on cubox-i.
+ * debian/watch: Use http.
+ * debian/control: Bump Standards-Version to 3.9.5, no changes needed.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 20 May 2014 10:04:56 -0700
+
+u-boot (2014.01-2) unstable; urgency=medium
+
+ * Set Maintainer to Vagrant Cascadian (Closes: #738446).
+ * Remove Micah Anderson from uploaders.
+ * Add Clint Adams <clint@debian.org> to uploaders.
+ * Use grep-dctrl to pull architecture list from debian/control, rather than
+ hardcoding architectures in debian/rules.
+ * u-boot-tools: Set architecture to linux-any (Closes: #730833).
+ * Build raspberry pi (rpi_b) image on armel.
+ - Patch to to enable EXT2/EXT4 support and raw initrds.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 04 Mar 2014 14:13:22 -0800
+
+u-boot (2014.01-1) unstable; urgency=low
+
+ * New upstream version.
+ * Updated patches.
+ * debian/watch: Update to catch -rc versions.
+ * debian/control: Update Vcs-* headers.
+ * u-boot-tools: Strip comment sections from mkimage and fw_printenv.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 11 Feb 2014 15:11:47 -0800
+
+u-boot (2013.10-3) unstable; urgency=low
+
+ * Move build of dbau1100 from mipsel to mips, which fixes FTBFS on mipsel,
+ due to dbau1100 being big-endian.
+ * Disable mipsel builds of u-boot, as it no longer has any targets.
+ * Add patch to specify default mmc partition to use when loading uEnv.txt
+ on BeagleBone Black.
+ * Add patch to support raw initrds on BeagleBone Black.
+ * Mark u-boot-tools as Multi-Arch: foreign.
+ * Mark u-boot as Multi-Arch: same.
+ * Update lintian overrides with list of current platforms.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 17 Nov 2013 00:09:32 -0800
+
+u-boot (2013.10-2) unstable; urgency=low
+
+ * debian/rules:
+ - Switch back to explicitly building the specified target.
+ - Allow building multiple targets per platform.
+ * debian/targets:
+ - Build the spl/u-boot-spl.bin target on several armhf platforms, which
+ generates the MLO file.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 21 Oct 2013 11:33:01 -0700
+
+u-boot (2013.10-1) unstable; urgency=low
+
+ * New upstream version (Closes: #667680, #726699).
+ - Update mipsel-native-endianness.diff
+ * debian/rules:
+ - Remove various tools/* files on clean target.
+ - Build each platform target and install MLO file if present.
+ (Closes: #687562).
+ - Support parallel builds using DEB_BUILD_OPTIONS=parallel=N.
+ * Enable BeagleBone Black and Wandboard platforms.
+ * Add patch to support uEnv.txt and directly loading zimage for Wandboard.
+ * Include env configs u-boot-tools examples (Closes: #631659, #636214).
+ * Only build u-boot on architectures which generate images (Closes: #635050).
+ * Drop i386 builds of u-boot, as the only target (eNET) was removed upstream.
+ * debian/control: Add myself to uploaders.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 20 Oct 2013 10:23:55 -0700
+
+u-boot (2013.01.01-4) unstable; urgency=low
+
+ * Upload to unstable.
+ * Drop transitional packages uboot-envtools and uboot-mkimage.
+
+ -- Clint Adams <clint@debian.org> Thu, 09 May 2013 21:41:25 -0400
+
+u-boot (2013.01.01-3) experimental; urgency=low
+
+ * Disable unnecessary JFFS2 on GuruPlug
+ * Disable MMC on GuruPlug, devices are not detected,
+ they show up as USB devices instead
+
+ -- Micah Anderson <micah@debian.org> Mon, 25 Mar 2013 22:56:32 -0400
+
+u-boot (2013.01.01-2) experimental; urgency=low
+
+ * More properly enable MMC on GuruPlug.
+ * Use new Efika target names.
+ * Bump to Standards-Version 3.9.4.
+
+ -- Clint Adams <clint@debian.org> Sun, 24 Mar 2013 21:59:03 -0400
+
+u-boot (2013.01.01-1) experimental; urgency=low
+
+ * New upstream version. closes: #699232.
+ - Drop strip-env-tools.diff (merged).
+ - Update kerma-sheevaplug-mvsdio.diff.
+ - Update mipsel-native-endianness.diff
+ * Enable CONFIG_SYS_MVFS and CONFIG_CMD_MMC for GuruPlug.
+
+ -- Clint Adams <clint@debian.org> Thu, 21 Mar 2013 14:21:33 -0400
+
+u-boot (2012.04.01-2) unstable; urgency=low
+
+ * Remove code duplication in kerma-sheevaplug-mvsdio.diff.
+ closes: #674230.
+
+ -- Clint Adams <clint@debian.org> Thu, 31 May 2012 21:04:49 -0400
+
+u-boot (2012.04.01-1) unstable; urgency=low
+
+ * New upstream version.
+ - Update mipsel-native-endianness.diff.
+ - Update no-error-on-set-but-unused-variables.diff (partially merged).
+ - Drop kirkwood_spi-irq_mask.diff (merged).
+ - Drop kirkwood-disable-l2c.diff (merged).
+
+ -- Clint Adams <clint@debian.org> Tue, 01 May 2012 18:07:19 -0400
+
+u-boot (2011.12-3) unstable; urgency=low
+
+ [ Jonathan Nieder ]
+ * kirkwood: disable L2 cache before Linux boot; thanks to Ian Campbell.
+ closes: #658904
+
+ [ Loïc Minier ]
+ * Add patch to strip env tools; sent to upstream mailing-list.
+
+ -- Loïc Minier <lool@debian.org> Sun, 11 Mar 2012 16:12:50 +0100
+
+u-boot (2011.12-2) unstable; urgency=low
+
+ [ Loïc Minier ]
+ * Build u-boot.imx for efikasb on armhf
+
+ [ Clint Adams ]
+ * Patch from Ian Campbell to fix Dreamplug breakage. closes: #655102.
+
+ -- Clint Adams <clint@debian.org> Sun, 08 Jan 2012 15:11:03 -0500
+
+u-boot (2011.12-1) unstable; urgency=low
+
+ * New upstream version.
+ - Drop build-timestamp_autogenerated.h-without-config.patch (merged).
+ - Drop ublimage-NAND-block-size-isn-t-set-at-build-time.patch (merged).
+ - Update kerma-sheevaplug-mvsdio.diff
+ - Update mipsel-native-endianness.diff
+ - Drop dreamplug-v8.patch (merged).
+
+ -- Clint Adams <clint@debian.org> Mon, 02 Jan 2012 17:49:39 -0500
+
+u-boot (2011.09-2) unstable; urgency=low
+
+ * Patch from Pino Toscano <pino@debian.org> to build on the Hurd.
+ closes: #648295.
+ * Drop gr_xc3s_1500 target.
+ * Add build-arch and build-indep targets to debian/rules.
+
+ -- Clint Adams <clint@debian.org> Tue, 15 Nov 2011 23:53:01 -0500
+
+u-boot (2011.09-1) unstable; urgency=low
+
+ [ Hector Oron ]
+ * Enable MX53LOCO platform.
+ * Update lintian overrides.
+
+ [ Loïc Minier ]
+ * Fix FTBFS on amd64 and allow `make tools` to succeed without
+ config.
+
+ [ Clint Adams ]
+ * New upstream version.
+ - Update kerma-sheevaplug-mvsdio.diff.
+ - Drop panda-default-console.diff (refactored).
+ - Replace dreamplug patches with Jason's v8.
+ * Add Buffalo Linkstation Mini env config from Benjamin Cama.
+
+ -- Clint Adams <clint@debian.org> Fri, 30 Sep 2011 21:22:23 -0400
+
+u-boot (2011.06-4) unstable; urgency=low
+
+ * Increase the USB non-bulk timeout by an order of magnitude.
+ May fix #635774.
+
+ -- Clint Adams <clint@debian.org> Sat, 06 Aug 2011 13:42:52 -0400
+
+u-boot (2011.06-3) unstable; urgency=low
+
+ * Add DreamPlug support.
+
+ -- Clint Adams <clint@debian.org> Sun, 24 Jul 2011 09:35:32 -0400
+
+u-boot (2011.06-2) unstable; urgency=low
+
+ * Use -Wno-error=unused-but-set-variable on i386.
+
+ -- Clint Adams <clint@debian.org> Sat, 02 Jul 2011 22:14:44 -0400
+
+u-boot (2011.06-1) unstable; urgency=low
+
+ * New upstream version.
+ * Fix i386 and mipsel builds.
+
+ -- Clint Adams <clint@debian.org> Sat, 02 Jul 2011 19:25:28 -0400
+
+u-boot (2011.06~rc3-1) unstable; urgency=low
+
+ * New upstream version.
+
+ -- Clint Adams <clint@debian.org> Sat, 02 Jul 2011 15:50:46 -0400
+
+u-boot (2011.06~rc2-2) unstable; urgency=low
+
+ * Fix mipsel endianness problem again.
+ * Try building gr_xc3s_1500 on sparc.
+
+ -- Clint Adams <clint@debian.org> Sat, 18 Jun 2011 10:13:53 -0400
+
+u-boot (2011.06~rc2-1) unstable; urgency=low
+
+ * New upstream version.
+ * Fix tools config selection.
+
+ -- Clint Adams <clint@debian.org> Tue, 14 Jun 2011 20:53:07 -0400
+
+u-boot (2011.06~rc1-1) unstable; urgency=low
+
+ * New upstream version.
+ - Update mipsel-native-endianness.diff
+ - Drop Drop-config.h-include-in-tools-imximage.h.diff (merged).
+ - Drop openrd-client-and-ultimate.diff (merged).
+ - Update openrd-mmc.diff (formerly openrd-mmc-mtd-fat.diff).
+ - Drop eNET-monitor_flash_len.diff (merged).
+ - Update snapshot.commit to 2011.06-rc1.
+ - Use the first target for each arch to build the tools, or
+ fake it on the other architectures.
+ * Only build efikamx image on armhf.
+
+ -- Clint Adams <clint@debian.org> Sat, 21 May 2011 11:04:30 -0400
+
+u-boot (2011.03-6) unstable; urgency=low
+
+ * Bump to Standards-Version 3.9.2.
+ * Tweak the u-boot-tools description.
+ * Drop igep0020, omap3_beagle, and omap4_panda targets from
+ armel; they are available on armhf.
+
+ -- Clint Adams <clint@debian.org> Tue, 26 Apr 2011 16:11:24 -0400
+
+u-boot (2011.03-5) unstable; urgency=low
+
+ [ Sebastian Reichel ]
+ * Add Pandaboard target. closes: #624123
+ * New patch to change default console on Pandaboard.
+
+ -- Clint Adams <clint@debian.org> Mon, 25 Apr 2011 15:36:16 -0400
+
+u-boot (2011.03-4) unstable; urgency=low
+
+ * Enable FAT, SD/MMC, MTD, JFFS, UBIFS support on OpenRD boards.
+
+ -- Clint Adams <clint@debian.org> Wed, 13 Apr 2011 18:05:36 -0400
+
+u-boot (2011.03-3) unstable; urgency=low
+
+ * Actually pass the right arch_number for OpenRD-Ultimate.
+
+ -- Clint Adams <clint@debian.org> Tue, 12 Apr 2011 14:28:20 -0400
+
+u-boot (2011.03-2) unstable; urgency=low
+
+ * Fix i386 FTBFS with eNET-monitor_flash_len.diff
+ * Add patch for OpenRD-Client and OpenRD-Ultimate.
+ * Drop openrd_base target and add openrd_ultimate target.
+
+ -- Clint Adams <clint@debian.org> Tue, 05 Apr 2011 15:56:43 -0400
+
+u-boot (2011.03-1) unstable; urgency=low
+
+ [ Loïc Minier ]
+ * Only try to build env tools when Linux MTD headers are present.
+ closes: #619673.
+
+ [ Clint Adams ]
+ * New upstream version.
+ - Drop fix-definition-of-global_data-struct.diff (now upstream).
+ - Drop EfikaMX-switch-to-MACH_TYPE_MX51_EFIKAMX.diff (upstream now).
+ - Drop sh-sh7785lcr-Fix-out-of-tree-building.diff (upstream now).
+ - Drop MIPS-dbau1x00-Remove-unused-flash-driver-stub.diff (upstream now).
+ - Drop x86-Align-config.mk-and-linker-scripts-with-other-ar.diff
+ (upstream now).
+ - Update snapshot.commit to 2011.03
+
+ -- Clint Adams <clint@debian.org> Fri, 01 Apr 2011 10:30:46 -0400
+
+u-boot (2011.03~rc1-4) experimental; urgency=low
+
+ * Add patch x86-Align-config.mk-and-linker-scripts-with-other-ar.
+ From upstream mailing-list; fixes x86 build (eNET).
+
+ -- Loïc Minier <lool@debian.org> Wed, 09 Feb 2011 14:51:01 +0100
+
+u-boot (2011.03~rc1-3) experimental; urgency=low
+
+ * Add debian/source/local-options
+ - unapply-patches: avoids committing patched tree after a build
+ - abort-on-upstream-changes: avoids creating a debian-changes-* patch
+ when building from a dirty tree
+ * Add patch MIPS-dbau1x00-Remove-unused-flash-driver-stub,
+ from u-boot-mipsel.git 17a990b55008fd79636e4880d9d10b7172ca87ce and also
+ sent to the upstream mailing-list; fixes build of dbau1x00 board by
+ removing board/dbau1x00/flash.c entirely, and hence fixes the build of
+ u-boot on mipsel.
+
+ -- Loïc Minier <lool@debian.org> Tue, 08 Feb 2011 16:49:05 +0100
+
+u-boot (2011.03~rc1-2) experimental; urgency=low
+
+ * New patch sh-sh7785lcr-Fix-out-of-tree-building; from upstream
+ e72f46787f44c1104a8df18511ab230b6072a1f0; fixes Debian sh4 build; thanks
+ Nobuhiro Iwamatsu; closes: #611873.
+
+ -- Loïc Minier <lool@debian.org> Mon, 07 Feb 2011 17:20:16 +0100
+
+u-boot (2011.03~rc1-1) experimental; urgency=low
+
+ * dpkg-shlibdeps usr/bin/* rather than just mkimage.
+ * uboot-mkimage's Section is utils.
+ * Allow overriding CROSS_COMPILE.
+ * New upstream release candidate.
+ - Merge commit v2011.03-rc1
+ - Update snapshot.commit to 2011.03-rc1
+ * Add EfikaMX support.
+ - Add patch EfikaMX-switch-to-MACH_TYPE_MX51_EFIKAMX from the upstream
+ mailing-list; fixes build on EfikaMX (EfikaMX: switch to
+ MACH_TYPE_MX51_EFIKAMX)
+ - Add patch Drop-config.h-include-in-tools-imximage.h from the upstream
+ mailing-list; fixes tools-all build of imximage.c.
+ - Build u-boot.imx for efikamx on armel.
+ * Refresh patch kerma-sheevaplug-mvsdio to fix fuzz.
+
+ -- Loïc Minier <lool@debian.org> Thu, 03 Feb 2011 13:13:14 +0100
+
+u-boot (2010.12-2) unstable; urgency=low
+
+ * Avoid calling dpkg-architecture if DEB_HOST_ARCH is set.
+ * Misc refactoring of debian/rules.
+ - Split per architecture list of platform and targets into
+ debian/targets.
+ - Actually use INSTALL_FILE/INSTALL_DIR/INSTALL_PROGRAM.
+ - Add support for cross-builds; these will currently lack tools.
+ - Build board-specific u-boot files in a separate build dir from the
+ generic tools
+ * Fix handling of -Wl,foo LDFLAGS; the upstream build passes LDFLAGS
+ directly to ld instead of calling gcc for linking; so instead of passing
+ -Wl,foo in LDFLAGS as in automake builds, one should set LDFLAGS to foo
+ directly; add a snippet to strip -Wl, from LDFLAGS; alternatively, we
+ could do as in other special packages like the kernel and simply unset
+ LDFLAGS entirely; closes: #607613.
+ * Install and compress upstream mkimage manpage; based on a patch by
+ Marcin Juszkiewicz.
+ * Add a dummy uboot-mkimage package for upgrades from squeeze; based on a
+ patch by Marcin Juszkiewicz; closes: #607618.
+ * Add new patch, fix-definition-of-global_data-struct, from the upstream
+ x86 maintainer; fixes build of eNET board which breaks u-boot's build on
+ i386; closes: #608801.
+ * Workaround an upstream bug in distclean by removing include/asm/proc and
+ /arch explicitly for now; patch was sent upstream.
+ * Don't repeat Section: in binary package.
+ * Add myself to Uploaders.
+ * Split tools in u-boot-tools package.
+ * Drop board-specific tools; these are too dangerous; only ship mkimage for
+ now.
+ * Add igep0020 and omap3_beagle builds on armel
+ * Update snapshot.commit to the 2010.12 release contents; this avoids a
+ pointless diff with the tarball.
+
+ -- Loïc Minier <lool@debian.org> Mon, 17 Jan 2011 22:43:41 +0100
+
+u-boot (2010.12-1) unstable; urgency=low
+
+ * New upstream version.
+ * Install more tools in preparation for splitting off a
+ u-boot-tools binary package.
+
+ -- Clint Adams <clint@gnu.org> Tue, 28 Dec 2010 17:03:44 -0500
+
+u-boot (2010.12~rc3-1) unstable; urgency=low
+
+ * New upstream release candidate.
+ * Add dockstar target.
+
+ -- Clint Adams <clint@gnu.org> Sun, 19 Dec 2010 09:45:42 -0500
+
+u-boot (2010.12~rc2-1) unstable; urgency=low
+
+ * New upstream release candidate.
+ * Add openrd_base target.
+
+ -- Clint Adams <clint@gnu.org> Sat, 04 Dec 2010 15:32:38 -0500
+
+u-boot (2010.09-2) unstable; urgency=low
+
+ * Enable ext2 commands on GuruPlug.
+ * Ship ELF files (for loading into RAM with OpenOCD).
+
+ -- Clint Adams <clint@gnu.org> Sat, 20 Nov 2010 18:20:40 -0500
+
+u-boot (2010.09-1) unstable; urgency=low
+
+ * New upstream release.
+
+ -- Clint Adams <schizo@debian.org> Wed, 29 Sep 2010 00:06:25 -0400
+
+u-boot (2010.09~rc2-1) unstable; urgency=low
+
+ * New upstrem release candidate.
+
+ -- Clint Adams <schizo@debian.org> Sun, 19 Sep 2010 14:20:52 -0400
+
+u-boot (2010.09~rc1-2) unstable; urgency=low
+
+ * Add patch from Gérald Kerma to add Sheevaplug mvsata support.
+ * Add patch from Gérald Kerma to add Sheevaplug mvsdio support.
+
+ -- Clint Adams <schizo@debian.org> Sun, 12 Sep 2010 11:48:22 -0400
+
+u-boot (2010.09~rc1-1) unstable; urgency=low
+
+ * New upstream release candidate.
+ - Drop guruplug-miiphy_reset.diff.
+ - Update mipsel-native-endianness.diff.
+ - Drop sh4-native-compile.diff.
+ * Bump to Standards-Version 3.9.1.
+
+ -- Clint Adams <schizo@debian.org> Sat, 11 Sep 2010 00:43:04 -0400
+
+u-boot (2010.06-1) unstable; urgency=low
+
+ * New upstream version.
+
+ -- Clint Adams <schizo@debian.org> Sat, 03 Jul 2010 13:49:46 -0400
+
+u-boot (2010.06~rc3-1) unstable; urgency=low
+
+ * New upstream version.
+ * Fix sh4-native-compile.diff to not break sh64, thanks to Paul
+ Mundt.
+ * Ship mkimage, conflict/replace uboot-mkimage, build on all
+ architectures.
+
+ -- Clint Adams <schizo@debian.org> Fri, 25 Jun 2010 14:49:06 -0400
+
+u-boot (2010.06~rc2-1) unstable; urgency=medium
+
+ * Add sh4-native-compile.diff from Aurelien Jarno. closes: #586026.
+ * New upstream version.
+ - Drop marvell-machtypes.diff.
+
+ -- Clint Adams <schizo@debian.org> Tue, 15 Jun 2010 21:37:26 -0400
+
+u-boot (2010.06~rc1-6) unstable; urgency=medium
+
+ * Add guruplug-miiphy_reset.diff.
+ * Clean between targets. closes: #585570.
+
+ -- Clint Adams <schizo@debian.org> Fri, 11 Jun 2010 21:57:31 -0400
+
+u-boot (2010.06~rc1-5) unstable; urgency=low
+
+ * Replace mipsel-native-endianness.diff with patch adapted
+ from a 2008 mailing list posting by Shinya Kuribayashi.
+
+ -- Clint Adams <schizo@debian.org> Fri, 04 Jun 2010 20:08:27 -0400
+
+u-boot (2010.06~rc1-4) unstable; urgency=low
+
+ * Add r2dplus target for sh4.
+ * mipsel-native-endianness.diff: don't force endianness on mips/mipsel
+
+ -- Clint Adams <schizo@debian.org> Thu, 03 Jun 2010 19:32:50 -0400
+
+u-boot (2010.06~rc1-3) unstable; urgency=low
+
+ * Fix mipsel typo.
+ * Apply patch from Nobuhiro Iwamatsu to change sh4 target board
+ from espt to sh7785lcr_32bit. closes: #584192.
+
+ -- Clint Adams <schizo@debian.org> Wed, 02 Jun 2010 08:25:04 -0400
+
+u-boot (2010.06~rc1-2) unstable; urgency=low
+
+ * Produce u-boot.bin on i386.
+ * Switch mipsel target to AMD DBAu1100.
+ * Add marvell-machtypes.diff.
+
+ -- Clint Adams <schizo@debian.org> Mon, 31 May 2010 22:09:29 -0400
+
+u-boot (2010.06~rc1-1) unstable; urgency=low
+
+ * Add Vcs-Git and Vcs-Browser headers.
+ * Add GuruPlug target (armel).
+ * Switch mipsel target to TB0229.
+ * Add watch file.
+ * Update README.Debian for SheevaPlug and GuruPlug.
+
+ -- Clint Adams <schizo@debian.org> Mon, 31 May 2010 19:29:40 -0400
+
+u-boot (2010.03-1) unstable; urgency=low
+
+ * Initial packaging. closes: #583605.
+
+ -- Clint Adams <schizo@debian.org> Fri, 28 May 2010 16:20:39 -0400
--- /dev/null
+9
\ No newline at end of file
--- /dev/null
+Source: u-boot
+Section: admin
+Priority: optional
+Maintainer: Vagrant Cascadian <vagrant@debian.org>
+Uploaders: Loïc Minier <lool@debian.org>, Clint Adams <clint@debian.org>
+Build-Depends: debhelper (>= 9), bc, device-tree-compiler, dpkg-dev (>= 1.17.0)
+Standards-Version: 3.9.6
+Homepage: http://www.denx.de/wiki/U-Boot/
+Vcs-Git: git://anonscm.debian.org/collab-maint/u-boot.git
+Vcs-Browser: http://anonscm.debian.org/gitweb/?p=collab-maint/u-boot.git;a=summary
+
+Package: u-boot
+Architecture: armel armhf avr32 mips sh4
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for embedded systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ ${uboot:platforms}
+
+Package: u-boot-tools
+Architecture: linux-any
+Multi-Arch: foreign
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Breaks: uboot-envtools (<< 20081215-3~),
+ uboot-mkimage (<= 0.4build1),
+ u-boot (<< 2010.12-2)
+Replaces: uboot-envtools (<< 20081215-3~),
+ uboot-mkimage (<= 0.4build1),
+ u-boot (<< 2010.12-2)
+Description: companion tools for Das U-Boot bootloader
+ This package includes the mkimage program, which allows generation of U-Boot
+ images in various formats, and the fw_printenv and fw_setenv programs to read
+ and modify U-Boot's environment.
--- /dev/null
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: Das U-Boot
+Source: ftp://ftp.denx.de/pub/u-boot/
+Files-Excluded: *fpgadata*
+ arch/powerpc/cpu/mpc8xx/upatch.c
+ drivers/dma/MCD_tasks.c
+
+Files: *
+Copyright: 2000-2013 Wolfgang Denk <wd@denx.de>
+ 1995-2002 Russell King
+ 1996-1998 Russell King
+ 1996-1999 Russell King
+ 1996-2000 Russell King
+ 1996 Russell King
+ 1997-1999 Russell King
+ 1999-2002 Vojtech Pavlik
+ 1999 Linus Torvalds / 2000-2002 Transmeta Corporation
+ 1999 Russell King
+ 2000-2002 Russell King
+ 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ 2001, 2002, 2003 / 2004 Gary Jennejohn garyj@denx.de
+ 2002-2007 Aleph One Ltd
+ 2002-2011 Aleph One Ltd
+ 2002 Thomas Gleixner (tglx@linutronix.de)
+ 2003 Kai-Uwe Bloem / 2000-2002 Transmeta Corporation / 1999 Linus Torvalds
+ 2004 by David Brownell
+ 2004 Nokia Corporation
+ 2004 Thomas Gleixner (tglx@linutronix.de)
+ 2005-2006 by Texas Instruments
+ 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation / 2006-2007 Nokia Corporation
+ 2005-2007 Samsung Electronics
+ 2005-2007 Samsung Electronics / Samsung Electronics, 2009 / Nokia Corporation, 2007
+ 2005-2008 Samsung Electronics
+ 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2006-2007 Nokia Corporation
+ 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2008-2009 MontaVista Software, Inc. <source@mvista.com> / 2006-2007 Nokia Corporation
+ 2005, Seagate Technology LLC / 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ 2006-2007 Nokia Corporation / 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation
+ 2006-2007 Nokia Corporation / 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments
+ 2006-2007 Nokia Corporation / 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ 2006, 2007 University of Szeged, Hungary / 2006-2008 Nokia Corporation
+ 2006-2008 Nokia Corporation
+ 2006,2009 Freescale Semiconductor, Inc
+ 2006-2009 Solarflare Communications Inc
+ 2006 Freescale Semiconductor, Inc
+ 2006 Nokia Corporation / 2005-2007 by Texas Instruments
+ 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> / 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> / 2009 Ilya Yanok, <yanok@emcraft.com>
+ 2006 Thomas Gleixner <tglx@linutronix.de>
+ 2007-2011 Freescale Semiconductor, Inc
+ 2007 Freescale Semiconductor, Inc
+ 2008-2009 / 2006-2008 Nokia Corporation
+ 2008-2009 Freescale Semiconductor, Inc
+ 2008-2009, MontaVista Software, Inc. <source@mvista.com> / 2010, by Texas Instruments
+ 2008,2009 STMicroelectronics / 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> / 2009 Alessandro Rubini <rubini@unipv.it>
+ 2008-2010 / 2006-2008 Nokia Corporation
+ 2008-2011 Freescale Semiconductor, Inc
+ 2008, 2011 Freescale Semiconductor, Inc
+ 2008,2011 Freescale Semiconductor, Inc
+ 2008-2012 Freescale Semiconductor, Inc
+ 2008 Altera Corporation / 2010 Thomas Chou <thomas@wytron.com.tw>
+ 2008 Atmel Corporation / 2013 Jagannadha Sutradharudu Teki, Xilinx Inc
+ 2008 by Texas Instruments / 2008 Mentor Graphics Corporation
+ 2008 Dave S.r.l. <www.dave.eu>
+ 2008 Extreme Engineering Solutions, Inc
+ 2008 Freescale Semiconductor, Inc
+ 2008 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> / 2004-2007 ARM Limited
+ 2008 Kim B. Heino / 2009
+ 2008 Qstreams Networks, Inc
+ 2008 Samsung Electronics / 2008-2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ 2008 STMicroelectronics / 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> / 2009 Alessandro Rubini <rubini@unipv.it>
+ 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ 2009-2010 eXMeritus, A Boeing Company / 2008-2009 Freescale Semiconductor, Inc
+ 2009-2010 Freescale Semiconductor, Inc
+ 2009-2010 Texas Instruments, Inc
+ 2009-2011 Freescale Semiconductor, Inc
+ 2009 coresystems GmbH
+ 2009 Freescale Semiconductor, Inc
+ 2009 Micrel Inc / 2011 Bticino s.p.a, Roberto Cerati <roberto.cerati@bticino.it>
+ 2009 MontaVista Software, Inc. <source@mvista.com> / 2006-2007 Nokia Corporation / 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation
+ 2010-2011 Freescale Semiconductor, Inc
+ 2010-2011 NVIDIA Corporation
+ 2010-2012 NVIDIA Corporation
+ 2010-2013 NVIDIA Corporation
+ 2010 Broadcom / 2012 Oleksandr Tymoshenko / 2012 Stephen Warren
+ 2010 NISHIMOTO Hiroki / 2010 Renesas Solutions Corp
+ 2010 Thomas Chou <thomas@wytron.com.tw>
+ 2010, Thomas Chou <thomas@wytron.com.tw>
+ 2010 Thomas Chou <thomas@wytron.com.tw> / 2008-2009 Avionic Design GmbH / 2007-2008 Avionic Design Development GmbH
+ 2010 Thomas Chou <thomas@wytron.com.tw> / 2008 Altera Corporation
+ 2011-2012 Renesas Solutions Corp
+ 2011 - 2012 Samsung Electronics / 2003-2006, Cluster File Systems, Inc, info@clusterfs.com
+ 2011 Analog Devices Inc
+ 2011 Freescale Semiconductor, Inc
+ 2011 Infineon Technologies
+ 2011 Ivan Djelic <ivan.djelic@parrot.com>
+ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 1995-2002 Russell King / 2010 Shawn Lin (nobuhiro@andestech.com)
+ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 1996-1998 Russell King / 2010 Shawn Lin (nobuhiro@andestech.com)
+ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 2010 Shawn Lin (nobuhiro@andestech.com)
+ 2011 Maxim Integrated Products
+ 2011 Parrot S.A
+ 2011 Renesas Solutions Corp
+ 2011 Renesas Solutions Corp / 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ 2011 The ChromiumOS Authors. All rights reserved
+ 2012-2013 Stephen Warren
+ 2012, by Texas Instruments
+ 2012, Google Inc
+ 2012 Renesas Solutions Corp
+ 2012 Samsung Electronics Co., Ltd
+ 2012 Stephen Warren
+ 2012 Texas Instruments Incorporated - http://www.ti.com/
+ 2013 Synopsys, Inc. (www.synopsys.com)
+License: GPL-2
+
+Files:
+ drivers/tpm/tpm_atmel_twi.c
+ drivers/gpio/tca642x.c
+ include/splash.h
+ include/fdt.h
+ include/libfdt.h
+ include/configs/controlcenterd.h
+ include/configs/mxs.h
+ include/configs/T1040QDS.h
+ include/tca642x.h
+ board/gdsys/p1022/tlb.c
+ board/gdsys/p1022/sdhc_boot.c
+ board/gdsys/p1022/ddr.c
+ board/gdsys/p1022/controlcenterd-id.c
+ board/gdsys/p1022/diu.c
+ board/gdsys/p1022/controlcenterd-id.h
+ board/gdsys/p1022/controlcenterd.c
+ board/gdsys/p1022/law.c
+ board/gdsys/common/dp501.h
+ common/splash.c
+ fs/jffs2/compr_lzo.c
+ arch/arm/include/asm/arch-am33xx/hardware_ti816x.h
+ arch/arm/mach-exynos/dmc_init_exynos4.c
+ arch/arm/mach-exynos/lowlevel_init.c
+ arch/arm/mach-exynos/clock_init_exynos4.c
+ arch/arm/mach-exynos/common_setup.h
+ arch/arm/cpu/armv7/am33xx/clock_ti816x.c
+Copyright:
+ 2013 Texas Instruments, Inc
+ 2013, Boundary Devices <info@boundarydevices.com>
+ 2006 David Gibson, IBM Corporation
+ 2012 Kim Phillips, Freescale Semiconductor
+ 2010-2013 Freescale Semiconductor, Inc
+ 2013 Marek Vasut <marex@denx.de>
+ 2010-2011 Freescale Semiconductor, Inc
+ 2004 Patrik Kluba
+ 1996-2002 Markus Franz Xaver Johannes Oberhumer
+ 2013 NVIDIA Corporation
+ 2011 The Chromium OS Authors
+ 2013 Samsung Electronics
+ 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ 2009, Texas Instruments, Incorporated
+License: GPL-2+
+
+Files: debian/*
+Copyright: Clint Adams <clint@debian.org>
+ Joey Hess <joeyh@debian.org>
+ Marc Singer <elf@debian.org>
+ Per Andersson <avtobiff@gmail.com>
+ Vagrant Cascadian <vagrant@debian.org>
+ Loïc Minier <lool@debian.org>
+License: GPL-2+
+
+Files: fs/yaffs2/yaffs_allocator.h
+ fs/yaffs2/yaffs_verify.h
+ fs/yaffs2/yaffs_packedtags1.h
+ fs/yaffs2/yaffs_yaffs1.h
+ fs/yaffs2/ydirectenv.h
+ fs/yaffs2/yaffs_yaffs2.h
+ fs/yaffs2/yaffsfs.h
+ fs/yaffs2/yaffs_osglue.h
+ fs/yaffs2/yaffs_flashif.h
+ fs/yaffs2/yaffs_nand.h
+ fs/yaffs2/yportenv.h
+ fs/yaffs2/yaffs_packedtags2.h
+ fs/yaffs2/yaffs_attribs.h
+ fs/yaffs2/yaffs_ecc.h
+ fs/yaffs2/yaffs_trace.h
+ fs/yaffs2/yaffs_guts.h
+ fs/yaffs2/yaffs_getblockinfo.h
+ fs/yaffs2/yaffs_bitmap.h
+ fs/yaffs2/yaffs_nameval.h
+ fs/yaffs2/yaffscfg.h
+ fs/yaffs2/yaffs_nandemul2k.h
+ fs/yaffs2/yaffs_mtdif2.h
+ fs/yaffs2/yaffs_flashif2.h
+ fs/yaffs2/yaffs_checkptrw.h
+ fs/yaffs2/yaffs_tagscompat.h
+ fs/yaffs2/yaffs_nandif.h
+ fs/yaffs2/yaffs_summary.h
+ fs/yaffs2/yaffs_mtdif.h
+Copyright: Copyright (C) 2002-2011 Aleph One Ltd.
+License: LGPL-2.1
+
+Files: lib/sha1.c
+Copyright: Copyright (C) 2003-2006 Christophe Devine
+License: LGPL-2.1
+
+Files: include/bzlib.h
+ lib/bzip2/*
+Copyright: Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
+License: bzlib-BSD-3
+
+Files: drivers/usb/musb-new/musb_host.h
+ drivers/usb/musb-new/musb_core.h
+ drivers/usb/musb-new/musb_core.c
+ drivers/usb/musb-new/musb_gadget.c
+ drivers/usb/musb-new/musb_gadget.h
+ drivers/usb/musb-new/musb_dma.h
+ drivers/usb/musb-new/musb_regs.h
+ drivers/usb/musb-new/musb_debug.h
+ drivers/usb/musb-new/musb_host.c
+ drivers/usb/musb-new/musb_gadget_ep0.c
+ drivers/usb/musb-new/musb_io.h
+Copyright: Copyright 2005 Mentor Graphics Corporation
+ Copyright (C) 2005-2006 by Texas Instruments
+ Copyright (C) 2006-2007 Nokia Corporation
+ Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+License: GPL-2
+
+Files: net/dns.c
+ include/slre.h
+ lib/slre.c
+Copyright: 2008 Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
+ 2004-2005 Sergey Lyubka <valenok@gmail.com>
+ 2009 Robin Getz <rgetz@blackfin.uclinux.org>]
+License: Beerware
+
+Files: include/libfdt.h
+ include/fdt.h
+Copyright: 2006 David Gibson, IBM Corporation
+ 2012 Kim Phillips, Freescale Semiconductor
+License: libfdt-BSD-GPL
+
+Files: include/pcmcia/yenta.h
+Copyright: 1999 David A. Hinds. All Rights Reserved
+License: MPL-GPL
+
+License: MPL-GPL
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use
+ * your version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+
+License: libfdt-BSD-GPL
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+License: Beerware
+ "THE BEER-WARE LICENSE" (Revision 42):
+ Sergey Lyubka wrote this file. As long as you retain this notice you
+ can do whatever you want with this stuff. If we meet some day, and you think
+ this stuff is worth it, you can buy me a beer in return.
+
+License: GPL-2
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ version 2 as published by the Free Software Foundation.
+ .
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/GPL-2'.
+
+License: bzlib-BSD-3
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ .
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ .
+ 2. The origin of this software must not be misrepresented; you must
+ not claim that you wrote the original software. If you use this
+ software in a product, an acknowledgment in the product
+ documentation would be appreciated but is not required.
+ .
+ 3. Altered source versions must be plainly marked as such, and must
+ not be misrepresented as being the original software.
+ .
+ 4. The name of the author may not be used to endorse or promote
+ products derived from this software without specific prior written
+ permission.
+ .
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+ OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+License: GPL-2+
+ This program is free software; you can redistribute it
+ and/or modify it under the terms of the GNU General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later
+ version.
+ .
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ PURPOSE. See the GNU General Public License for more
+ details.
+ .
+ You should have received a copy of the GNU General Public
+ License along with this package; if not, write to the Free
+ Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+ Boston, MA 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/GPL-2'.
+
+License: LGPL-2.1
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License version 2.1 as
+ published by the Free Software Foundation.
+ .
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+ .
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ MA 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/LGPL-2.1'.
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd1 0x00000 0x10000 0x01000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+#
+# Hardware : Marvell Plug2L Reference Board
+# No redundant environment
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x40000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x3F000 0x1000 0x1000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundand
+# environment sector is assumed present.
+
+# for Buffalo Linkstation Mini
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x3f000 0x01000 0x01000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x3F000 0x1000 0x1000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x30000 0x10000 0x10000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd4 0x360000 0x10000 0x10000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mmcblk0 0x80000 0x2000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR.
+
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd1 0x0000 0x4000 0x4000 2
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR.
+
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd2 0x0000 0x40000 0x20000 2
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd5 0x00000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd4 0x0000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# This config is for QNAP TS-119, TS-219 and TS-219P boards.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd4 0x0000 0x1000 0x40000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x60000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mmcblk0 0xC0000 0x2000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mmcblk0 0x60000 0x2000
--- /dev/null
+.\" Copyright © 2008 Per Andersson <avtobiff@gmail.com>
+.\" This man page is covered by the GNU General Public License (GPLv2 or higher).
+.TH fw_printenv 8 "August 2008" "Debian Project" ""
+
+.SH NAME
+fw_printenv \- Tool for printing environment for the bootloader U-Boot
+
+.SH SYNOPSIS
+fw_printenv [ \fB\-n\fP \fIname\fP ] [ \fIname\fP \fI...\fP ]
+
+.SH DESCRIPTION
+\fIfw_printenv\fP is a simple tool for printing the environment for the
+bootloader U-Boot. All environment variables matching the names given as
+arguments are shown. If \fIfw_printenv\fP is called without any arguments the
+entire environment is printed.
+
+.SH OPTIONS
+.IP \fB\-n\fP
+If the \fBn\fP flag is set \fIfw_printenv\fP only prints the value of the supplied variable \fIname\fP.
+
+.SH FILES
+.IP \fB/etc/fw_env.config\fP
+Configuration file for fw_printenv.
+
+.SH SEE ALSO
+fw_setenv(8)
+
+.SH AUTHOR
+Wolfgang Denk <wd@denx.de>
+.PP
+This manual page was written by Per Andersson <avtobiff@gmail.com>
--- /dev/null
+.\" Copyright © 2008 Per Andersson <avtobiff@gmail.com>
+.\" This man page is covered by the GNU General Public License (GPLv2 or higher).
+.TH fw_setenv 8 "August 2008" "Debian Project" ""
+
+.SH NAME
+fw_setenv \- Tool for modifying the environment for the bootloader U\-Boot
+
+.SH SYNOPSIS
+fw_setenv \fIname\fP [ \fIvalue\fP ]
+
+.SH DESCRIPTION
+\fIfw_setenv\fP is a simple tool for modifying either the environment for the
+bootloader U-Boot. If the variable already is set in the environment it is
+updated, otherwise it is created and set. If only one argument is given,
+variable name, the corresponding variable is deleted.
+
+.SH FILES
+.IP \fB/etc/fw_env.config\fP
+Configuration file for fw_setenv.
+
+.SH SEE ALSO
+fw_printenv(8)
+
+.SH AUTHOR
+Wolfgang Denk <wd@denx.de>
+.PP
+This manual page was written by Per Andersson <avtobiff@gmail.com>
--- /dev/null
+From ebdb222b0d65bcc050e3f0fd6e97faf17fb3eae4 Mon Sep 17 00:00:00 2001
+Sender: Loïc Minier <loic.minier@linaro.org>
+From: Enric Balletbo i Serra <eballetbo@iseebcn.com>
+Date: Wed, 23 Feb 2011 14:35:41 +0100
+Subject: [PATCH] ARM: OMAP3: Revamp IGEP default configuration
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The default IGEP configuration doesn't do anything useful; using some
+boot.scr search logic like BeagleBoard is much more useful.
+
+Signed-off-by: Loïc Minier <loic.minier@linaro.org>
+---
+ include/configs/igep0020.h | 55 ++++++++++++++++++++++++++++++++++++++++---
+ 1 files changed, 51 insertions(+), 4 deletions(-)
+
+diff --git a/include/configs/igep0020.h b/include/configs/igep0020.h
+index c19ecc0..2466562 100644
+--- a/include/configs/igep0020.h
++++ b/include/configs/igep0020.h
+@@ -130,13 +130,60 @@
+ #define CONFIG_TWL4030_POWER 1
+
+ /* Environment information */
+-#define CONFIG_BOOTCOMMAND \
+- "mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0"
+-
+ #define CONFIG_BOOTDELAY 3
+
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+- "usbtty=cdc_acm\0"
++ "loadaddr=0x82000000\0" \
++ "usbtty=cdc_acm\0" \
++ "console=ttyS2,115200n8\0" \
++ "mpurate=500\0" \
++ "vram=12M\0" \
++ "dvimode=1024x768MR-16@60\0" \
++ "defaultdisplay=dvi\0" \
++ "mmcdev=0\0" \
++ "mmcroot=/dev/mmcblk0p2 rw\0" \
++ "mmcrootfstype=ext3 rootwait\0" \
++ "nandroot=/dev/mtdblock4 rw\0" \
++ "nandrootfstype=jffs2\0" \
++ "mmcargs=setenv bootargs console=${console} " \
++ "mpurate=${mpurate} " \
++ "vram=${vram} " \
++ "omapfb.mode=dvi:${dvimode} " \
++ "omapfb.debug=y " \
++ "omapdss.def_disp=${defaultdisplay} " \
++ "root=${mmcroot} " \
++ "rootfstype=${mmcrootfstype}\0" \
++ "nandargs=setenv bootargs console=${console} " \
++ "mpurate=${mpurate} " \
++ "vram=${vram} " \
++ "omapfb.mode=dvi:${dvimode} " \
++ "omapfb.debug=y " \
++ "omapdss.def_disp=${defaultdisplay} " \
++ "root=${nandroot} " \
++ "rootfstype=${nandrootfstype}\0" \
++ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
++ "bootscript=echo Running bootscript from mmc ...; " \
++ "source ${loadaddr}\0" \
++ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
++ "mmcboot=echo Booting from mmc ...; " \
++ "run mmcargs; " \
++ "bootm ${loadaddr}\0" \
++ "nandboot=echo Booting from nand ...; " \
++ "run nandargs; " \
++ "nand read ${loadaddr} 280000 400000; " \
++ "bootm ${loadaddr}\0" \
++
++#define CONFIG_BOOTCOMMAND \
++ "if mmc rescan ${mmcdev}; then " \
++ "if run loadbootscript; then " \
++ "run bootscript; " \
++ "else " \
++ "if run loaduimage; then " \
++ "run mmcboot; " \
++ "else run nandboot; " \
++ "fi; " \
++ "fi; " \
++ "else run nandboot; fi"
+
+ #define CONFIG_AUTO_COMPLETE 1
+
+--
+1.7.2.3
+
--- /dev/null
+Add u-boot.kwb to "make all" target on Kirkwood.
+
+--- a/Makefile
++++ b/Makefile
+@@ -736,6 +736,7 @@
+ ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
+ ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
+ ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
++ALL-$(CONFIG_KIRKWOOD) += u-boot.kwb
+ ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin
+ ifeq ($(CONFIG_SPL_FRAMEWORK),y)
+ ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
--- /dev/null
+Add the debian revision to the U-boot version, which is displayed at
+boot and can be helpful to determine which specific version is used.
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -350,7 +350,7 @@ KBUILD_AFLAGS := -D__ASSEMBLY__
+
+ # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
+ UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
+-UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
++UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)$(DEBIAN_REVISION)
+
+ export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
+ export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
--- /dev/null
+Description: Add spl/arndale-spl.bin rule
+Author: Ian Campbell <ijc@debian.org>
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -1311,6 +1311,9 @@ spl/sunxi-spl.bin: spl/u-boot-spl
+ spl/u-boot-spl-dtb.sfp: spl/u-boot-spl
+ @:
+
++spl/arndale-spl.bin: spl/u-boot-spl
++ @:
++
+ tpl/u-boot-tpl.bin: tools prepare
+ $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
+
--- /dev/null
+Index: u-boot/include/configs/am335x_evm.h
+===================================================================
+--- u-boot.orig/include/configs/am335x_evm.h
++++ u-boot/include/configs/am335x_evm.h
+@@ -326,9 +326,8 @@
+ #endif
+
+ #ifdef CONFIG_USB_MUSB_GADGET
+-#define CONFIG_USB_ETHER
+-#define CONFIG_USB_ETH_RNDIS
+-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
++#define CONFIG_CMD_USB_MASS_STORAGE
++#define CONFIG_USB_FUNCTION_MASS_STORAGE
+
+ /* USB TI's IDs */
+ #define CONFIG_G_DNL_VENDOR_NUM 0x0451
--- /dev/null
+Ensure that CONFIG_SANDBOX is set when running "make env", avoiding a
+failure to build caused by config_distro_bootcmd.h following the wrong
+codepath...
+
+Index: u-boot/include/configs/sandbox.h
+===================================================================
+--- u-boot.orig/include/configs/sandbox.h
++++ u-boot/include/configs/sandbox.h
+@@ -127,6 +127,9 @@
+
+ #define CONFIG_BOOTCOMMAND ""
+
++#ifndef CONFIG_SANDBOX
++#define CONFIG_SANDBOX 1
++#endif
+ #include <config_distro_bootcmd.h>
+
+ #define CONFIG_KEEP_SERVERADDR
--- /dev/null
+--- a/include/compiler.h
++++ b/include/compiler.h
+@@ -15,7 +15,7 @@
+ defined(__sun__) || \
+ defined(__APPLE__)
+ # include <inttypes.h>
+-#elif defined(__linux__) || defined(__WIN32__) || defined(__MINGW32__)
++#elif defined(__linux__) || defined(__WIN32__) || defined(__MINGW32__) || defined(__GLIBC__)
+ # include <stdint.h>
+ #endif
+
+@@ -41,7 +41,7 @@
+ #define O_BINARY 0
+ #endif
+
+-#ifdef __linux__
++#if defined(__linux__) || defined(__GLIBC__)
+ # include <endian.h>
+ # include <byteswap.h>
+ #elif defined(__MACH__) || defined(__FreeBSD__)
--- /dev/null
+[MIPS] Fix little-endian build with non-ELDK toolchains
+
+We've been in trouble for a long time when cross compiling with non-ELDK
+toolchains. This is caused by -EB passed to CPPFLAGS incorrectly, by the
+lack of an endian specifier to LDFLAGS, and by wrong OUTPUT_FORMATs.
+
+We're going to implement two workarounds. One is the endianness specifier
+bugfix not to pass -EB / -EL to CPPFLAGS unless ELDK toolchain is used.
+Note that ELDK and non-ELDK toolchains know their default endianness, so
+the endianness specifier may not be necessary in principle.
+
+The other is removal of OUTPUT_FORMAT in *.lds files. If we have this,
+it doesn't work unless an endianness specifier is added to LDFLAGS. As
+we haven't added that to LDFLAGS so far, it must have not worked properly,
+except ELDK; I don't know why and how ELDK works, though.
+
+With these two changes, all objects will be generated and linked in the
+toolchain's default endianness. Then MAKEALL mips_el will work even with
+non-ELDK toolchain.
+
+Note that Linux/MIPS kernel has CONFIG_CPU_BIG_ENDIAN and
+CONFIG_CPU_LITTLE_ENDIAN alternatives to allow users to compile kernels
+with a toolchain for the other endianness. But U-Boot does not have such
+feature for now, and it's another story.
+
+Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+---
+ board/dbau1x00/u-boot.lds | 4 ----
+ board/gth2/u-boot.lds | 4 ----
+ board/incaip/u-boot.lds | 4 ----
+ board/pb1x00/u-boot.lds | 4 ----
+ board/purple/u-boot.lds | 4 ----
+ board/qemu-mips/u-boot.lds | 4 ----
+ board/tb0229/u-boot.lds | 2 --
+ cpu/mips/config.mk | 8 --------
+ examples/mips.lds | 4 ----
+ mips_config.mk | 26 ++++++++++++++++++++++++++
+ 10 files changed, 26 insertions(+), 38 deletions(-)
+
+Index: u-boot/examples/standalone/mips.lds
+===================================================================
+--- u-boot.orig/examples/standalone/mips.lds
++++ u-boot/examples/standalone/mips.lds
+@@ -5,10 +5,6 @@
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+-/*
+-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+-*/
+-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
+ OUTPUT_ARCH(mips)
+ SECTIONS
+ {
--- /dev/null
+Use a relative path to include the sunxi spl header, which allows
+mksunxiboot to build on any arch.
+
+--- a/tools/mksunxiboot.c
++++ b/tools/mksunxiboot.c
+@@ -15,7 +15,7 @@
+ #include <errno.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+-#include "asm/arch/spl.h"
++#include "../arch/arm/include/asm/arch-sunxi/spl.h"
+
+ #define STAMP_VALUE 0x5F0A6C39
+
--- /dev/null
+Enables support for ext4, the "load" command, and using bootz with raw initrds.
+
+Index: u-boot/include/configs/mx53loco.h
+===================================================================
+--- u-boot.orig/include/configs/mx53loco.h
++++ u-boot/include/configs/mx53loco.h
+@@ -46,6 +46,7 @@
+ #define CONFIG_CMD_FS_GENERIC
+ #define CONFIG_CMD_FAT
+ #define CONFIG_CMD_EXT2
++#define CONFIG_CMD_EXT4
+ #define CONFIG_DOS_PARTITION
+
+ /* Eth Configs */
--- /dev/null
+Index: u-boot/include/configs/mx6cuboxi.h
+===================================================================
+--- u-boot.orig/include/configs/mx6cuboxi.h
++++ u-boot/include/configs/mx6cuboxi.h
+@@ -99,7 +99,7 @@
+ "initrd_high=0xffffffff\0" \
+ "fdt_high=0xffffffff\0" \
+ "ip_dyn=yes\0" \
+- "console=" CONFIG_CONSOLE_DEV "\0" \
++ "console=" CONFIG_CONSOLE_DEV ",115200\0" \
+ "bootm_size=0x10000000\0" \
+ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+ "update_sd_firmware=" \
--- /dev/null
+Enable booting of zImage/vmlinuz and initrd without requiring the use of
+mkimage to create uImage/uInitrd.
+
+Index: u-boot/include/configs/nokia_rx51.h
+===================================================================
+--- u-boot.orig/include/configs/nokia_rx51.h 2014-05-13 15:05:59.000000000 -0700
++++ u-boot/include/configs/nokia_rx51.h 2014-05-13 15:07:43.213088875 -0700
+@@ -136,6 +136,9 @@
+ #define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */
+ #define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */
+
++#define CONFIG_CMD_BOOTZ /* boot zImage */
++#define CONFIG_SUPPORT_RAW_INITRD
++
+ #ifdef ONENAND_SUPPORT
+
+ #define CONFIG_CMD_ONENAND /* ONENAND support */
--- /dev/null
+Index: u-boot/arch/powerpc/config.mk
+===================================================================
+--- u-boot.orig/arch/powerpc/config.mk
++++ u-boot/arch/powerpc/config.mk
+@@ -5,10 +5,6 @@
+ # SPDX-License-Identifier: GPL-2.0+
+ #
+
+-ifeq ($(CROSS_COMPILE),)
+-CROSS_COMPILE := ppc_8xx-
+-endif
+-
+ CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000
+ LDFLAGS_FINAL += --gc-sections
+ LDFLAGS_FINAL += --bss-plt
--- /dev/null
+Forwarded: https://patchwork.ozlabs.org/patch/548343/
+From: Marek Vasut <marex@denx.de>
+From: Vagrant Cascadian <vagrant@aikidev.net>
+Description: Switch Novena to distro bootcmd
+
+Signed-off-by: Vagrant Cascadian <vagrant@aikidev.net>
+Signed-off-by: Marek Vasut <marex@denx.de>
+Cc: Sean Cross <xobs@kosagi.com>
+Cc: Stefano Babic <sbabic@denx.de>
+---
+ include/configs/novena.h | 23 ++++++++++++++++++++++-
+ 1 file changed, 22 insertions(+), 1 deletion(-)
+
+V2: Add fdtfile to specify the device tree blob.
+ Fix fdt_addr_r to point past kernel address.
+
+Index: u-boot/include/configs/novena.h
+===================================================================
+--- u-boot.orig/include/configs/novena.h
++++ u-boot/include/configs/novena.h
+@@ -16,6 +16,7 @@
+ #define CONFIG_FIT
+ #define CONFIG_KEYBOARD
+
++#include <config_distro_defaults.h>
+ #include "mx6_common.h"
+
+ /* U-Boot Commands */
+@@ -58,7 +59,7 @@
+ /* Booting Linux */
+ #define CONFIG_BOOTFILE "fitImage"
+ #define CONFIG_BOOTARGS "console=ttymxc1,115200 "
+-#define CONFIG_BOOTCOMMAND "run net_nfs"
++#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run net_nfs"
+ #define CONFIG_HOSTNAME novena
+
+ /* Physical Memory Map */
+@@ -189,6 +190,7 @@
+ #endif
+
+ /* Extra U-Boot environment. */
++#ifndef CONFIG_SPL_BUILD
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+@@ -197,7 +199,12 @@
+ "bootdev=/dev/mmcblk0p1\0" \
+ "rootdev=/dev/mmcblk0p2\0" \
+ "netdev=eth0\0" \
+- "kernel_addr_r=0x18000000\0" \
++ "kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
++ "pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
++ "scriptaddr="__stringify(CONFIG_LOADADDR)"\0" \
++ "ramdisk_addr_r=0x28000000\0" \
++ "fdt_addr_r=0x18000000\0" \
++ "fdtfile=imx6q-novena.dtb\0" \
+ "addcons=" \
+ "setenv bootargs ${bootargs} " \
+ "console=${consdev},${baudrate}\0" \
+@@ -241,5 +248,19 @@
+ "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
+ "fi ; " \
+ "fi\0" \
++ BOOTENV
++
++#define BOOT_TARGET_DEVICES(func) \
++ func(MMC, mmc, 0) \
++ func(USB, usb, 0) \
++ func(SATA, sata, 0) \
++ func(PXE, pxe, na) \
++ func(DHCP, dhcp, na)
++
++#include <config_distro_bootcmd.h>
++
++#else
++#define CONFIG_EXTRA_ENV_SETTINGS
++#endif /* CONFIG_SPL_BUILD */
+
+ #endif /* __CONFIG_H */
--- /dev/null
+add-debian-revision-to-u-boot-version
+mipsel-native-endianness.diff
+no-force-CROSS_COMPILE-powerpc.diff
+tools-generic-builds.patch
+tools-only-in-no-dot-config-targets.diff
+Makefile-add-kwb-target-to-all.patch
+hurd.diff
+
+udoo/udoo_quad-support.patch
+udoo/udoo-standardized-variables
+
+mx53loco
+
+n900-bootz-raw-initrd.diff
+
+beagleboneblack/usb-mass-storage.patch
+
+arndale/board-spl-rule.diff
+
+sh4-fix-linker-name-prefix.patch
+
+ensure-config-sandbox-for-make-env.patch
+mksunxiboot-spl.patch
+
+upstream/image.c-Fix-non-Android-booting-with-ramdisk-and-or-.patch
+
+upstream/distro-bootcmd-imx/0001-arm-imx-Switch-Wandboard-to-use-config_distro_bootcm.patch
+upstream/distro-bootcmd-imx/0002-arm-imx-Switch-mx6cuboxi-to-use-config_distro_bootcm.patch
+upstream/distro-bootcmd-imx/0003-imx6-fix-warnings-due-to-switch-to-distro-environmen.patch
+
+mx6cuboxi/serial_console_speed.patch
+
+upstream/am33x_distro_bootcmd/0001-config_distro_bootcmd.h-Use-a-private-variable-for-b.patch
+upstream/am33x_distro_bootcmd/0002-configs-ti_armv7_common.h-Add-default-addresses-for-.patch
+upstream/am33x_distro_bootcmd/0003-configs-am335x_evm-Support-distro-bootcmds.patch
+
+novena/0001-arm-novena-Switch-novena-to-config_distro_bootcmd.patch
+upstream/novena/0001-arm-imx6-novena-gw_ventana-Fix-use-of-pfuze100-bit-d.patch
+upstream/novena/0002-arm-imx6-novena-Enable-extfs-support-in-SPL.patch
+
+upstream/lamobo-r1/0001-sunxi-Add-support-for-the-Lamobo-R1-board.patch
+
+upstream/mkimage-fix-multi-script/0001-mkimage-Fix-generating-multi-and-script-images.patch
+upstream/mkimage-fix-multi-script/0002-mkimage-Fix-warning-from-fix-for-generating-multi-an.patch
--- /dev/null
+Description: sh4-fix-linker-name-prefix.patch
+ u-boot currently fails to build from source on sh4 since the
+ linker name prefix defined in arch/sh/config.mk is outdated.
+ On current Debian installations, the binaries of the GNU
+ toolchain are named using the triplett scheme
+ $arch-$kernel-$toolchain. Thus, on sh4, the proper name
+ is "sh4-linux-gnu-ld" instead of "sh4-linux-ld". This
+ patch updates build configuration on sh4 to reflect that.
+
+---
+
+Origin: Debian
+Bug: (none yet)
+Bug-Debian: https://bugs.debian.org/771747
+Bug-Ubuntu: (none)
+Forwarded: (not yet)
+Reviewed-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+Last-Update: 2014-12-10
+
+--- u-boot-2014.10+dfsg1.orig/arch/sh/config.mk
++++ u-boot-2014.10+dfsg1/arch/sh/config.mk
+@@ -6,7 +6,7 @@
+ #
+
+ ifeq ($(CROSS_COMPILE),)
+-CROSS_COMPILE := sh4-linux-
++CROSS_COMPILE := sh4-linux-gnu-
+ endif
+
+ CONFIG_STANDALONE_LOAD_ADDR ?= 0x8C000000
--- /dev/null
+Description: Enable generic tools build
+Author: Hector Oron <zumbi@debian.org>
+
+--- u-boot-2014.10~rc2+dfsg1.orig/tools/Makefile
++++ u-boot-2014.10~rc2+dfsg1/tools/Makefile
+@@ -52,7 +52,7 @@ HOSTCFLAGS_xway-swap-bytes.o := -pedanti
+ hostprogs-y += mkenvimage
+ mkenvimage-objs := mkenvimage.o os_support.o lib/crc32.o
+
+-hostprogs-y += dumpimage mkimage
++hostprogs-y += dumpimage mkimage mksunxiboot kwboot
+ hostprogs-$(CONFIG_FIT_SIGNATURE) += fit_info fit_check_sign
+
+ FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := common/image-sig.o
--- /dev/null
+Revert upstream commit c7ad5cbb1ef2c33883f0fa7d0455095004fd306d:
+
+ Makefile: drop "tools-only" from no-dot-config-targets
+
+This indirectly pulls in a build-dependency on libssl-dev used for FIT
+image support, and possibly GPL/OpenSSL licensing incompatibility
+issues.
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -411,7 +411,7 @@ timestamp_h := include/generated/timesta
+
+ no-dot-config-targets := clean clobber mrproper distclean \
+ help %docs check% coccicheck \
+- ubootversion backup
++ ubootversion backup tools-only
+
+ config-targets := 0
+ mixed-targets := 0
--- /dev/null
+Adds standardized variables, fdtfile, fdt_addr_r, ramdisk_addr_r and
+kernel_addr_r.
+
+Index: u-boot/include/configs/udoo.h
+===================================================================
+--- u-boot.orig/include/configs/udoo.h
++++ u-boot/include/configs/udoo.h
+@@ -74,6 +74,9 @@
+ "initrd_high=0xffffffff\0" \
+ "fdt_file=undefined\0" \
+ "fdt_addr=0x18000000\0" \
++ "fdt_addr_r=0x18000000\0" \
++ "ramdisk_addr_r=0x13000000\0" \
++ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
+ "mmcdev=0\0" \
+@@ -146,8 +149,10 @@
+ "fi;\0" \
+ "findfdt=" \
+ "if test $board_rev = MX6Q ; then " \
++ "setenv fdtfile imx6q-udoo.dtb; " \
+ "setenv fdt_file imx6q-udoo.dtb; fi; " \
+ "if test $board_rev = MX6DL ; then " \
++ "setenv fdt_file imx6dl-udoo.dtb; " \
+ "setenv fdt_file imx6dl-udoo.dtb; fi; " \
+ "if test $fdt_file = undefined; then " \
+ "echo WARNING: Could not determine dtb to use; fi; \0"
--- /dev/null
+Description: Features and sane scripts for UDOO board
+ Enable the following features:
+ * Ext4
+ * Generic FS (load)
+ * Raw initramfs
+ Tweak scripts to:
+ * use generic "load" command to load files from FS.
+ * provide "loadzimage" macro.
+ * account for different locations of boot script file.
+Author: Michael Fladischer <FladischerMichael@fladi.at>
+Last-Update: 2014-07-01
+Forwarded: no
+
+Index: u-boot/include/configs/udoo.h
+===================================================================
+--- u-boot.orig/include/configs/udoo.h
++++ u-boot/include/configs/udoo.h
+@@ -95,12 +95,16 @@
+ "fi\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
++ "loadbootenv=load mmc ${mmcdev}:${mmcpart} ${loadaddr} uEnv.txt\0" \
++ "importbootenv=echo Importing environment from mmc (uEnv.txt)...; " \
++ "env import -t $loadaddr $filesize\0" \
+ "loadbootscript=" \
+- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
++ "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
++ "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
++ "loadzimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage\0" \
++ "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+@@ -149,17 +153,33 @@
+ "echo WARNING: Could not determine dtb to use; fi; \0"
+
+ #define CONFIG_BOOTCOMMAND \
+- "run findfdt; " \
+- "mmc dev ${mmcdev}; if mmc rescan; then " \
+- "if run loadbootscript; then " \
+- "run bootscript; " \
+- "else " \
+- "if run loadimage; then " \
+- "run mmcboot; " \
+- "else run netboot; " \
+- "fi; " \
+- "fi; " \
+- "else run netboot; fi"
++ "run findfdt; " \
++ "mmc dev ${mmcdev};" \
++ "if mmc rescan; then " \
++ "echo SD/MMC found on device ${mmcdev};" \
++ "if run loadbootenv; then " \
++ "run importbootenv;" \
++ "fi;" \
++ "echo Checking if uenvcmd is set ...;" \
++ "if test -n $uenvcmd; then " \
++ "echo Running uenvcmd ...;" \
++ "run uenvcmd;" \
++ "fi;" \
++ "if run loadbootscript; then " \
++ "echo Running boot script ${script} ...;" \
++ "run bootscript; " \
++ "fi;" \
++ "setenv script /boot/${script};" \
++ "if run loadbootscript; then " \
++ "echo Running boot script ${script} ...;" \
++ "run bootscript; " \
++ "fi;" \
++ "echo Running default loadzimage ...;" \
++ "if run loadzimage; then " \
++ "run loadfdt;" \
++ "run mmcboot;" \
++ "fi;" \
++ "fi;"
+
+ /* Print Buffer Size */
+ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
--- /dev/null
+From 59d03cb37700e2e204451e83b38c326df0435ff8 Mon Sep 17 00:00:00 2001
+From: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
+Date: Fri, 28 Aug 2015 15:01:54 +0200
+Subject: [PATCH 1/3] config_distro_bootcmd.h: Use a private variable for
+ bootpart
+
+Hush has an oddity where using ${var} causes var to resolved in the the global
+address space (iotw the environment) first and only afterwards will the local
+variable space be searched.
+
+This causes odd side-effects when iterating over the boot partitions
+using ${bootpart} if the environment also has a bootpart variable (e.g. for
+the various TI boards). Fix this by using the hopefully more unique
+${distro_bootpart} instead of ${bootpart}.
+
+Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
+Acked-by: Stephen Warren <swarren@wwwdotorg.org>
+---
+ include/config_distro_bootcmd.h | 18 +++++++++++-------
+ 1 file changed, 11 insertions(+), 7 deletions(-)
+
+diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
+index 3a360ca4..d2f49a1 100644
+--- a/include/config_distro_bootcmd.h
++++ b/include/config_distro_bootcmd.h
+@@ -191,11 +191,12 @@
+ BOOTENV_BOOT_TARGETS \
+ \
+ "boot_extlinux=" \
+- "sysboot ${devtype} ${devnum}:${bootpart} any " \
++ "sysboot ${devtype} ${devnum}:${distro_bootpart} any " \
+ "${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \
+ \
+ "scan_dev_for_extlinux=" \
+- "if test -e ${devtype} ${devnum}:${bootpart} " \
++ "if test -e ${devtype} " \
++ "${devnum}:${distro_bootpart} " \
+ "${prefix}extlinux/extlinux.conf; then " \
+ "echo Found ${prefix}extlinux/extlinux.conf; " \
+ "run boot_extlinux; " \
+@@ -203,13 +204,14 @@
+ "fi\0" \
+ \
+ "boot_a_script=" \
+- "load ${devtype} ${devnum}:${bootpart} " \
++ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "source ${scriptaddr}\0" \
+ \
+ "scan_dev_for_scripts=" \
+ "for script in ${boot_scripts}; do " \
+- "if test -e ${devtype} ${devnum}:${bootpart} " \
++ "if test -e ${devtype} " \
++ "${devnum}:${distro_bootpart} " \
+ "${prefix}${script}; then " \
+ "echo Found U-Boot script " \
+ "${prefix}${script}; " \
+@@ -219,7 +221,8 @@
+ "done\0" \
+ \
+ "scan_dev_for_boot=" \
+- "echo Scanning ${devtype} ${devnum}:${bootpart}...; " \
++ "echo Scanning ${devtype} " \
++ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_extlinux; " \
+ "run scan_dev_for_scripts; " \
+@@ -228,8 +231,9 @@
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} -bootable devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+- "for bootpart in ${devplist}; do " \
+- "if fstype ${devtype} ${devnum}:${bootpart} " \
++ "for distro_bootpart in ${devplist}; do " \
++ "if fstype ${devtype} " \
++ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+--
+2.1.4
+
--- /dev/null
+From 7749b67f6cff3246444051764b5bc62decfb9f58 Mon Sep 17 00:00:00 2001
+From: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
+Date: Fri, 28 Aug 2015 15:01:55 +0200
+Subject: [PATCH 2/3] configs: ti_armv7_common.h: Add default addresses for pxe
+ and scripts
+
+Add mandatory address variables for loading scripts and pxe configuration as
+per README.distro
+
+Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
+---
+ include/configs/ti_armv7_common.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
+index 6dc6515..586bd2b 100644
+--- a/include/configs/ti_armv7_common.h
++++ b/include/configs/ti_armv7_common.h
+@@ -56,6 +56,8 @@
+ "fdt_addr_r=0x88000000\0" \
+ "rdaddr=0x88080000\0" \
+ "ramdisk_addr_r=0x88080000\0" \
++ "scriptaddr=0x80000000\0" \
++ "pxefile_addr_r=0x80100000\0" \
+ "bootm_size=0x10000000\0"
+
+ #define DEFAULT_MMC_TI_ARGS \
+--
+2.1.4
+
--- /dev/null
+From bc3199fd1875f89e9e1fb2af45665c4a718217b9 Mon Sep 17 00:00:00 2001
+From: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
+Date: Fri, 28 Aug 2015 15:01:56 +0200
+Subject: [PATCH 3/3] configs: am335x_evm: Support distro bootcmds
+
+Add support for distro bootcmds and network booting while retaining
+backwards compatibility with the current "legacy" setup. With these
+changes the default boot sequence becomes:
+
+* SD card (standard distro boot)
+* SD card (legacy boot)
+* EMMC (standard distro boot)
+* EMMC (legacy boot)
+* Nand (legacy boot)
+* PXE (standard distro boot)
+* DHCP (standard distro boot)
+
+The older boot scripts have some overlap with what the distro
+bootcommands to however i've left them unchanged to prevent introduction
+of subtle bugs.
+
+Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
+---
+ include/configs/am335x_evm.h | 45 ++++++++++++++++++++++++++++++++++++--------
+ 1 file changed, 37 insertions(+), 8 deletions(-)
+
+diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
+index 3cf768e..b036199 100644
+--- a/include/configs/am335x_evm.h
++++ b/include/configs/am335x_evm.h
+@@ -18,6 +18,10 @@
+
+ #include <configs/ti_am335x_common.h>
+
++/* Don't override the distro default bootdelay */
++#undef CONFIG_BOOTDELAY
++#include <config_distro_defaults.h>
++
+ #ifndef CONFIG_SPL_BUILD
+ #ifndef CONFIG_FIT
+ # define CONFIG_FIT
+@@ -67,6 +71,37 @@
+
+ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
++#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
++ "bootcmd_" #devtypel #instance "=" \
++ "setenv mmcdev " #instance"; "\
++ "setenv bootpart " #instance":2 ; "\
++ "run mmcboot\0"
++
++#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
++ #devtypel #instance " "
++
++#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
++ "bootcmd_" #devtypel "=" \
++ "run nandboot\0"
++
++#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
++ #devtypel #instance " "
++
++#define BOOT_TARGET_DEVICES(func) \
++ func(MMC, mmc, 0) \
++ func(LEGACY_MMC, legacy_mmc, 0) \
++ func(MMC, mmc, 1) \
++ func(LEGACY_MMC, legacy_mmc, 1) \
++ func(NAND, nand, 0) \
++ func(PXE, pxe, na) \
++ func(DHCP, dhcp, na)
++
++#define CONFIG_BOOTCOMMAND \
++ "run findfdt; " \
++ "run distro_bootcmd"
++
++#include <config_distro_bootcmd.h>
++
+ #ifndef CONFIG_SPL_BUILD
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ DEFAULT_LINUX_BOOT_ENV \
+@@ -160,16 +195,10 @@
+ "echo WARNING: Could not determine device tree to use; fi; \0" \
+ NANDARGS \
+ NETARGS \
+- DFUARGS
++ DFUARGS \
++ BOOTENV
+ #endif
+
+-#define CONFIG_BOOTCOMMAND \
+- "run findfdt; " \
+- "run mmcboot;" \
+- "setenv mmcdev 1; " \
+- "setenv bootpart 1:2; " \
+- "run mmcboot;" \
+- "run nandboot;"
+
+ /* NS16550 Configuration */
+ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
+--
+2.1.4
+
--- /dev/null
+From acc6bb569390f7e51127d76464db67a434a5d379 Mon Sep 17 00:00:00 2001
+From: Vagrant Cascadian <vagrant@debian.org>
+Date: Tue, 27 Oct 2015 12:49:40 -0700
+Subject: [PATCH 1/3] arm: imx: Switch Wandboard to use
+ config_distro_bootcmd.h.
+
+This allows for more flexible and standardized boot across multiple
+platforms.
+
+Remove redundant legacy boot environment.
+
+Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
+---
+ include/configs/wandboard.h | 82 +++++++++++----------------------------------
+ 1 file changed, 19 insertions(+), 63 deletions(-)
+
+diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
+index 6e8aec2..6408b5e 100644
+--- a/include/configs/wandboard.h
++++ b/include/configs/wandboard.h
+@@ -88,19 +88,15 @@
+
+ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+- "script=boot.scr\0" \
+- "image=zImage\0" \
+- "console=ttymxc0\0" \
++ "console=ttymxc0,115200\0" \
+ "splashpos=m,m\0" \
+ "fdtfile=undefined\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
++ "fdt_addr_r=0x18000000\0" \
+ "fdt_addr=0x18000000\0" \
+- "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
+ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+- "mmcpart=1\0" \
+- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+ "update_sd_firmware_filename=u-boot.imx\0" \
+ "update_sd_firmware=" \
+ "if test ${ip_dyn} = yes; then " \
+@@ -115,8 +111,6 @@
+ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+ "fi; " \
+ "fi\0" \
+- "mmcargs=setenv bootargs console=${console},${baudrate} " \
+- "root=${mmcroot}; run videoargs\0" \
+ "videoargs=" \
+ "setenv nextcon 0; " \
+ "if hdmidet; then " \
+@@ -143,51 +137,6 @@
+ "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
+ "fi; " \
+ "setenv bootargs ${bootargs} ${fbmem}\0" \
+- "loadbootscript=" \
+- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+- "bootscript=echo Running bootscript from mmc ...; " \
+- "source\0" \
+- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
+- "mmcboot=echo Booting from mmc ...; " \
+- "run mmcargs; " \
+- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+- "if run loadfdt; then " \
+- "bootz ${loadaddr} - ${fdt_addr}; " \
+- "else " \
+- "if test ${boot_fdt} = try; then " \
+- "bootz; " \
+- "else " \
+- "echo WARN: Cannot load the DT; " \
+- "fi; " \
+- "fi; " \
+- "else " \
+- "bootz; " \
+- "fi;\0" \
+- "netargs=setenv bootargs console=${console},${baudrate} " \
+- "root=/dev/nfs " \
+- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+- "netboot=echo Booting from net ...; " \
+- "run netargs; " \
+- "if test ${ip_dyn} = yes; then " \
+- "setenv get_cmd dhcp; " \
+- "else " \
+- "setenv get_cmd tftp; " \
+- "fi; " \
+- "${get_cmd} ${image}; " \
+- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+- "if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
+- "bootz ${loadaddr} - ${fdt_addr}; " \
+- "else " \
+- "if test ${boot_fdt} = try; then " \
+- "bootz; " \
+- "else " \
+- "echo WARN: Cannot load the DT; " \
+- "fi; " \
+- "fi; " \
+- "else " \
+- "bootz; " \
+- "fi;\0" \
+ "findfdt="\
+ "if test $board_name = C1 && test $board_rev = MX6Q ; then " \
+ "setenv fdtfile imx6q-wandboard.dtb; fi; " \
+@@ -199,19 +148,26 @@
+ "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine dtb to use; fi; \0" \
++ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
++ "pxe_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
++ "ramdisk_addr_r=0x13000000\0" \
++ "ramdiskaddr=0x13000000\0" \
++ "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
++ BOOTENV
++
++#define BOOT_TARGET_DEVICES(func) \
++ func(MMC, mmc, 0) \
++ func(MMC, mmc, 1) \
++ func(USB, usb, 0) \
++ func(PXE, pxe, na) \
++ func(DHCP, dhcp, na)
+
+ #define CONFIG_BOOTCOMMAND \
+ "run findfdt; " \
+- "mmc dev ${mmcdev}; if mmc rescan; then " \
+- "if run loadbootscript; then " \
+- "run bootscript; " \
+- "else " \
+- "if run loadimage; then " \
+- "run mmcboot; " \
+- "else run netboot; " \
+- "fi; " \
+- "fi; " \
+- "else run netboot; fi"
++ "run distro_bootcmd"
++
++#include <config_distro_defaults.h>
++#include <config_distro_bootcmd.h>
+
+ /* Physical Memory Map */
+ #define CONFIG_NR_DRAM_BANKS 1
+--
+2.1.4
+
--- /dev/null
+From 1c5e6b6fbb3835b1170c01844c862c0eaa9bffed Mon Sep 17 00:00:00 2001
+From: Vagrant Cascadian <vagrant@debian.org>
+Date: Tue, 27 Oct 2015 13:18:22 -0700
+Subject: [PATCH 2/3] arm: imx: Switch mx6cuboxi to use
+ config_distro_bootcmd.h.
+
+This allows for more flexible and standardized boot across multiple
+platforms.
+
+Remove redundant legacy boot environment.
+
+Cc: Otavio Salvador <otavio@ossystems.com.br>
+Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
+---
+ include/configs/mx6cuboxi.h | 88 +++++++++++++--------------------------------
+ 1 file changed, 24 insertions(+), 64 deletions(-)
+
+diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
+index 6e89dd1..0f3b992 100644
+--- a/include/configs/mx6cuboxi.h
++++ b/include/configs/mx6cuboxi.h
+@@ -81,23 +81,26 @@
+
+ #define CONFIG_MXC_UART_BASE UART1_BASE
+ #define CONFIG_CONSOLE_DEV "ttymxc0"
+-#define CONFIG_MMCROOT "/dev/mmcblk0p2"
+ #define CONFIG_SYS_FSL_USDHC_NUM 1
+ #define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */
+
+ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
++#ifndef CONFIG_SPL_BUILD
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+- "script=boot.scr\0" \
+- "image=zImage\0" \
+ "fdtfile=undefined\0" \
+ "fdt_addr_r=0x18000000\0" \
+- "boot_fdt=try\0" \
++ "fdt_addr=0x18000000\0" \
++ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
++ "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
++ "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
++ "ramdisk_addr_r=0x13000000\0" \
++ "ramdiskaddr=0x13000000\0" \
++ "initrd_high=0xffffffff\0" \
++ "fdt_high=0xffffffff\0" \
+ "ip_dyn=yes\0" \
+ "console=" CONFIG_CONSOLE_DEV "\0" \
+ "bootm_size=0x10000000\0" \
+ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+- "mmcpart=1\0" \
+- "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "update_sd_firmware=" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+@@ -111,53 +114,6 @@
+ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+ "fi; " \
+ "fi\0" \
+- "mmcargs=setenv bootargs console=${console},${baudrate} " \
+- "root=${mmcroot}\0" \
+- "loadbootscript=" \
+- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+- "bootscript=echo Running bootscript from mmc ...; " \
+- "source\0" \
+- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
+- "mmcboot=echo Booting from mmc ...; " \
+- "run mmcargs; " \
+- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+- "if run loadfdt; then " \
+- "bootz ${loadaddr} - ${fdt_addr_r}; " \
+- "else " \
+- "if test ${boot_fdt} = try; then " \
+- "bootz; " \
+- "else " \
+- "echo WARN: Cannot load the DT; " \
+- "fi; " \
+- "fi; " \
+- "else " \
+- "bootz; " \
+- "fi;\0" \
+- "netargs=setenv bootargs console=${console},${baudrate} " \
+- "root=/dev/nfs " \
+- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+- "netboot=echo Booting from net ...; " \
+- "run netargs; " \
+- "if test ${ip_dyn} = yes; then " \
+- "setenv get_cmd dhcp; " \
+- "else " \
+- "setenv get_cmd tftp; " \
+- "fi; " \
+- "${get_cmd} ${image}; " \
+- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+- "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
+- "bootz ${loadaddr} - ${fdt_addr_r}; " \
+- "else " \
+- "if test ${boot_fdt} = try; then " \
+- "bootz; " \
+- "else " \
+- "echo WARN: Cannot load the DT; " \
+- "fi; " \
+- "fi; " \
+- "else " \
+- "bootz; " \
+- "fi;\0" \
+ "findfdt="\
+ "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
+ "setenv fdtfile imx6q-hummingboard.dtb; fi; " \
+@@ -169,20 +125,24 @@
+ "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine dtb to use; fi; \0" \
++ BOOTENV
+
+ #define CONFIG_BOOTCOMMAND \
+ "run findfdt; " \
+- "mmc dev ${mmcdev};" \
+- "if mmc rescan; then " \
+- "if run loadbootscript; then " \
+- "run bootscript; " \
+- "else " \
+- "if run loadimage; then " \
+- "run mmcboot; " \
+- "else run netboot; " \
+- "fi; " \
+- "fi; " \
+- "else run netboot; fi"
++ "run distro_bootcmd"
++
++#define BOOT_TARGET_DEVICES(func) \
++ func(MMC, mmc, 0) \
++ func(USB, usb, 0) \
++ func(PXE, pxe, na) \
++ func(DHCP, dhcp, na)
++
++#include <config_distro_defaults.h>
++#include <config_distro_bootcmd.h>
++
++#else
++#define CONFIG_EXTRA_ENV_SETTINGS
++#endif /* CONFIG_SPL_BUILD */
+
+ /* Physical Memory Map */
+ #define CONFIG_NR_DRAM_BANKS 1
+--
+2.1.4
+
--- /dev/null
+From 3d99e862691bb7053ba9e1537a971971976fde13 Mon Sep 17 00:00:00 2001
+From: Stefano Babic <sbabic@denx.de>
+Date: Fri, 13 Nov 2015 10:49:01 +0100
+Subject: [PATCH 3/3] imx6: fix warnings due to switch to distro environment
+
+wandboard and mx6cuboxi have warnings because BOOT_DELAY
+is defined twice.
+
+Signed-off-by: Stefano Babic <sbabic@denx.de>
+CC: Vagrant Cascadian <vagrant@debian.org>
+CC: Otavio Salvador <otavio@ossystems.com.br>
+CC: Fabio Estevam <fabio.estevam@freescale.com>
+---
+ include/configs/mx6cuboxi.h | 2 +-
+ include/configs/wandboard.h | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
+index 0f3b992..4feb121 100644
+--- a/include/configs/mx6cuboxi.h
++++ b/include/configs/mx6cuboxi.h
+@@ -8,6 +8,7 @@
+ #ifndef __MX6CUBOXI_CONFIG_H
+ #define __MX6CUBOXI_CONFIG_H
+
++#include <config_distro_defaults.h>
+ #include "mx6_common.h"
+
+ #define CONFIG_SPL_LIBCOMMON_SUPPORT
+@@ -137,7 +138,6 @@
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
+
+-#include <config_distro_defaults.h>
+ #include <config_distro_bootcmd.h>
+
+ #else
+diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
+index 6408b5e..4c8e9e9 100644
+--- a/include/configs/wandboard.h
++++ b/include/configs/wandboard.h
+@@ -9,6 +9,7 @@
+ #ifndef __CONFIG_H
+ #define __CONFIG_H
+
++#include <config_distro_defaults.h>
+ #include "mx6_common.h"
+
+ #define CONFIG_SPL_LIBCOMMON_SUPPORT
+@@ -166,7 +167,6 @@
+ "run findfdt; " \
+ "run distro_bootcmd"
+
+-#include <config_distro_defaults.h>
+ #include <config_distro_bootcmd.h>
+
+ /* Physical Memory Map */
+--
+2.1.4
+
--- /dev/null
+From c139b5ff0999ec3d44a02ebdb623a92e5782e53e Mon Sep 17 00:00:00 2001
+From: Tom Rini <trini@konsulko.com>
+Date: Tue, 27 Oct 2015 19:04:40 -0400
+Subject: [PATCH 4/4] image.c: Fix non-Android booting with ramdisk and/or
+ device tree
+
+In 1fec3c5 I added a check that if we had an Android image we default to
+trying the kernel address for a ramdisk. However when we don't have an
+Android image buf is NULL and we oops here. Ensure that we have 'buf'
+to check first.
+
+Reported-by: elipe Balbi <balbi@ti.com>
+Signed-off-by: Tom Rini <trini@konsulko.com>
+---
+ common/image.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/common/image.c b/common/image.c
+index e607109..85c4f39 100644
+--- a/common/image.c
++++ b/common/image.c
+@@ -913,7 +913,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
+ * Look for an Android boot image.
+ */
+ buf = map_sysmem(images->os.start, 0);
+- if (genimg_get_format(buf) == IMAGE_FORMAT_ANDROID)
++ if (buf && genimg_get_format(buf) == IMAGE_FORMAT_ANDROID)
+ select = argv[0];
+ #endif
+
+--
+2.1.4
+
--- /dev/null
+[ Vagrant Cascadian ]
+Modifed to remove usb_power_supply entry.
+
+From aa56cb374de8ae83f3280fdd6c280724228b86d7 Mon Sep 17 00:00:00 2001
+From: Jelle de Jong <jelledejong@powercraft.nl>
+Date: Sun, 18 Oct 2015 16:34:13 +0200
+Subject: [PATCH 1/2] sunxi: Add support for the Lamobo R1 board
+
+The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such
+on the PCB, is meant as a A20 based router board. As such the board comes
+with a built-in switch chip giving it 5 gigabit ethernet ports, and it
+has a large empty area on the pcb with mounting holes which will fit a
+2.5 inch harddisk. To complete its networking features it has a
+Realtek RTL8192CU for WiFi 802.11 b/g/n.
+
+The dts file is identical to the one submitted upstream.
+
+Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl>
+Reviewed-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/dts/Makefile | 1 +
+ arch/arm/dts/sun7i-a20-lamobo-r1.dts | 297 +++++++++++++++++++++++++++++++++++
+ board/sunxi/MAINTAINERS | 5 +
+ configs/Lamobo_R1_defconfig | 16 ++
+ 4 files changed, 319 insertions(+)
+ create mode 100644 arch/arm/dts/sun7i-a20-lamobo-r1.dts
+ create mode 100644 configs/Lamobo_R1_defconfig
+
+Index: u-boot/arch/arm/dts/Makefile
+===================================================================
+--- u-boot.orig/arch/arm/dts/Makefile
++++ u-boot/arch/arm/dts/Makefile
+@@ -134,6 +134,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
+ sun7i-a20-cubietruck.dtb \
+ sun7i-a20-hummingbird.dtb \
+ sun7i-a20-i12-tvbox.dtb \
++ sun7i-a20-lamobo-r1.dtb \
+ sun7i-a20-m3.dtb \
+ sun7i-a20-m5.dtb \
+ sun7i-a20-mk808c.dtb \
+Index: u-boot/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+===================================================================
+--- /dev/null
++++ u-boot/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+@@ -0,0 +1,292 @@
++/*
++ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "sun7i-a20.dtsi"
++#include "sunxi-common-regulators.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++ model = "Lamobo R1";
++ compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
++
++ aliases {
++ serial0 = &uart0;
++ serial1 = &uart3;
++ serial2 = &uart7;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&led_pins_lamobo_r1>;
++
++ green {
++ label = "lamobo_r1:green:usr";
++ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ reg_gmac_3v3: gmac-3v3 {
++ compatible = "regulator-fixed";
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
++ regulator-name = "gmac-3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ startup-delay-us = <100000>;
++ enable-active-high;
++ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
++ };
++};
++
++&ahci_pwr_pin_a {
++ allwinner,pins = "PB3";
++};
++
++&ahci {
++ target-supply = <®_ahci_5v>;
++ status = "okay";
++};
++
++&cpu0 {
++ cpu-supply = <®_dcdc2>;
++ operating-points = <
++ /* kHz uV */
++ 960000 1400000
++ 912000 1400000
++ 864000 1350000
++ 720000 1250000
++ 528000 1150000
++ 312000 1100000
++ 144000 1050000
++ >;
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&gmac {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_pins_rgmii_a>;
++ phy = <&phy1>;
++ phy-mode = "rgmii";
++ phy-supply = <®_gmac_3v3>;
++ status = "okay";
++
++ phy1: ethernet-phy@1 {
++ reg = <1>;
++ };
++};
++
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins_a>;
++ status = "okay";
++
++ axp209: pmic@34 {
++ reg = <0x34>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++&i2c2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c2_pins_a>;
++ status = "okay";
++};
++
++&ir0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&ir0_rx_pins_a>;
++ status = "okay";
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
++ vmmc-supply = <®_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
++ cd-inverted;
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&otg_sram {
++ status = "okay";
++};
++
++&pio {
++ usb0_id_detect_pin: usb0_id_detect_pin@0 {
++ allwinner,pins = "PH4";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
++ mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
++ allwinner,pins = "PH10";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
++ };
++
++ gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
++ allwinner,pins = "PH23";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++
++ led_pins_lamobo_r1: led_pins@0 {
++ allwinner,pins = "PH24";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++ };
++};
++
++#include "axp209.dtsi"
++
++®_ahci_5v {
++ gpio = <&pio 1 3 0>; /* PB3 */
++ status = "okay";
++};
++
++®_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-cpu";
++};
++
++®_dcdc3 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1400000>;
++ regulator-name = "vdd-int-dll";
++};
++
++®_ldo1 {
++ regulator-name = "vdd-rtc";
++};
++
++®_ldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "avcc";
++};
++
++®_usb0_vbus {
++ status = "okay";
++};
++
++®_usb1_vbus {
++ status = "okay";
++};
++
++®_usb2_vbus {
++ status = "okay";
++};
++
++&spi0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi0_pins_a>,
++ <&spi0_cs0_pins_a>,
++ <&spi0_cs1_pins_a>;
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
++
++&uart3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart3_pins_b>;
++ status = "okay";
++};
++
++&uart7 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart7_pins_a>;
++ status = "okay";
++};
++
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&usbphy {
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb0_id_detect_pin>;
++ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ usb0_vbus-supply = <®_usb0_vbus>;
++ usb1_vbus-supply = <®_usb1_vbus>;
++ usb2_vbus-supply = <®_usb2_vbus>;
++ status = "okay";
++};
+Index: u-boot/board/sunxi/MAINTAINERS
+===================================================================
+--- u-boot.orig/board/sunxi/MAINTAINERS
++++ u-boot/board/sunxi/MAINTAINERS
+@@ -134,6 +134,11 @@ M: Chen-Yu Tsai <wens@csie.org>
+ S: Maintained
+ F: configs/Ippo_q8h_v5_defconfig
+
++LAMOBO-R1 BOARD
++M: Jelle de Jong <jelledejong@powercraft.nl>
++S: Maintained
++F: configs/Lamobo_R1_defconfig
++
+ LINKSPRITE-PCDUINO BOARD
+ M: Zoltan Herpai <wigyori@uid0.hu>
+ S: Maintained
+Index: u-boot/configs/Lamobo_R1_defconfig
+===================================================================
+--- /dev/null
++++ u-boot/configs/Lamobo_R1_defconfig
+@@ -0,0 +1,16 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_MACH_SUN7I=y
++CONFIG_DRAM_CLK=432
++CONFIG_MMC0_CD_PIN="PH10"
++CONFIG_GMAC_TX_DELAY=4
++CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
++CONFIG_SPL=y
++CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,SATAPWR=SUNXI_GPB(3)"
++# CONFIG_CMD_IMLS is not set
++# CONFIG_CMD_FLASH is not set
++# CONFIG_CMD_FPGA is not set
++CONFIG_CMD_GPIO=y
++CONFIG_ETH_DESIGNWARE=y
++CONFIG_USB_EHCI_HCD=y
--- /dev/null
+Bug-Debian: https://bugs.debian.org/805434
+From 6ae6e16005252dbca0b4a06beea1be895df48e16 Mon Sep 17 00:00:00 2001
+From: Philippe De Swert <philippedeswert@gmail.com>
+Date: Fri, 4 Dec 2015 00:11:23 +0200
+Subject: [PATCH 1/2] mkimage : Fix generating multi and script images
+
+Seems 92a655c3 broke creating multi and script type images.
+Since the file1:file2:file3 string does not get split up,
+it fails on trying to open an non-existing file.
+
+mkimage -A arm -O linux -T multi -C none -d zImage:splash.bmp:device.dtb uimage
+tools/mkimage: Can't open zImage:splash.bmp:device.dtb: No such file or directory
+
+Since the sizes of the different parts seem to get added in the actual
+routine that handles multi and script type images, we can probably skip the
+bit of the code that causes the failure for that type of images.
+
+Signed-off-by: Philippe De Swert <philippedeswert@gmail.com>
+---
+ tools/mkimage.c | 31 ++++++++++++++++++-------------
+ 1 file changed, 18 insertions(+), 13 deletions(-)
+
+diff --git a/tools/mkimage.c b/tools/mkimage.c
+index 8af9d50..ae01cb1 100644
+--- a/tools/mkimage.c
++++ b/tools/mkimage.c
+@@ -311,21 +311,26 @@ NXTARG: ;
+ exit (retval);
+ }
+
+- dfd = open(params.datafile, O_RDONLY | O_BINARY);
+- if (dfd < 0) {
+- fprintf(stderr, "%s: Can't open %s: %s\n",
+- params.cmdname, params.datafile, strerror(errno));
+- exit(EXIT_FAILURE);
+- }
++ if (!params.type == IH_TYPE_MULTI ||
++ !params.type == IH_TYPE_SCRIPT) {
++ dfd = open(params.datafile, O_RDONLY | O_BINARY);
++ if (dfd < 0) {
++ fprintf(stderr, "%s: Can't open %s: %s\n",
++ params.cmdname, params.datafile,
++ strerror(errno));
++ exit(EXIT_FAILURE);
++ }
+
+- if (fstat(dfd, &sbuf) < 0) {
+- fprintf(stderr, "%s: Can't stat %s: %s\n",
+- params.cmdname, params.datafile, strerror(errno));
+- exit(EXIT_FAILURE);
+- }
++ if (fstat(dfd, &sbuf) < 0) {
++ fprintf(stderr, "%s: Can't stat %s: %s\n",
++ params.cmdname, params.datafile,
++ strerror(errno));
++ exit(EXIT_FAILURE);
++ }
+
+- params.file_size = sbuf.st_size + tparams->header_size;
+- close(dfd);
++ params.file_size = sbuf.st_size + tparams->header_size;
++ close(dfd);
++ }
+
+ /*
+ * In case there an header with a variable
+--
+2.1.4
+
--- /dev/null
+Bug-Debian: https://bugs.debian.org/805434
+From 34633141259e6af20959e087b1c244c3285a306b Mon Sep 17 00:00:00 2001
+From: Marek Vasut <marex@denx.de>
+Date: Mon, 7 Dec 2015 18:01:54 +0100
+Subject: [PATCH 2/2] mkimage: Fix warning from fix for generating multi and
+ script images again
+
+Seems 6ae6e160 broke creating images in certain cases, there
+are two problems with that patch.
+
+First is that the expression "!x == 4 || !x == 6" is ambiguous. The
+intention here was "!(x == 4) || !(x == 6)" based on reading further in
+the file, where this was borrowed from. This however is interpreted by
+gcc as "(!x) == 4 || (!x) == 6" and always false. gcc-5.x will warn
+about this case.
+
+The second problem is that we do not want to test for the case of "(NOT x
+is 4) OR (NOT x is 6)" but instead "(x is not equal to 4) AND (x is not
+equal to 6)". This is because in those two cases we already execute the
+code question in another part of the file. Rewrite the expression and
+add parenthesis for clarity.
+
+Signed-off-by: Marek Vasut <marex@denx.de>
+Cc: Tom Rini <trini@konsulko.com>
+Cc: Philippe De Swert <philippedeswert@gmail.com>
+Cc: Simon Glass <sjg@chromium.org>
+[trini: Re-word Marek's explanation]
+---
+ tools/mkimage.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/tools/mkimage.c b/tools/mkimage.c
+index ae01cb1..8f8b6df 100644
+--- a/tools/mkimage.c
++++ b/tools/mkimage.c
+@@ -311,8 +311,7 @@ NXTARG: ;
+ exit (retval);
+ }
+
+- if (!params.type == IH_TYPE_MULTI ||
+- !params.type == IH_TYPE_SCRIPT) {
++ if ((params.type != IH_TYPE_MULTI) && (params.type != IH_TYPE_SCRIPT)) {
+ dfd = open(params.datafile, O_RDONLY | O_BINARY);
+ if (dfd < 0) {
+ fprintf(stderr, "%s: Can't open %s: %s\n",
+--
+2.1.4
+
--- /dev/null
+From 18e02ffe5e626fe409ca9427e368c879f6ee450c Mon Sep 17 00:00:00 2001
+From: Marek Vasut <marex@denx.de>
+Date: Thu, 26 Nov 2015 14:08:50 +0100
+Subject: [PATCH 1/2] arm: imx6: novena, gw_ventana: Fix use of pfuze100 bit
+ definitions
+
+The following patch changed the PFUZE100 swbst register bit definitions
+and broke PMIC configuration on multiple boards, at least on the novena
+and gw_ventana. This patch fixes it.
+
+commit 8fa46350a4c7dca7710362f6c871098557b934ad
+Author: Peng Fan <Peng.Fan@freescale.com>
+Date: Fri Aug 7 16:43:45 2015 +0800
+
+ power: regulator: add pfuze100 support
+
+Signed-off-by: Marek Vasut <marex@denx.de>
+Cc: Fabio Estevam <fabio.estevam@freescale.com>
+Cc: Peng Fan <Peng.Fan@freescale.com>
+Cc: Przemyslaw Marczak <p.marczak@samsung.com>
+Cc: Stefano Babic <sbabic@denx.de>
+Cc: Tim Harvey <tharvey@gateworks.com>
+Cc: Vagrant Cascadian <vagrant@aikidev.net>
+Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com>
+Tested-by: Vagrant Cascadian <vagrant@aikidev.net>
+Reviewed-by: Peng Fan <Peng.Fan@freescale.com>
+Acked-by: Tim Harvey <tharvey@gateworks.com>
+---
+ board/gateworks/gw_ventana/common.c | 2 +-
+ board/kosagi/novena/novena.c | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
+index d406c83..a20190e 100644
+--- a/board/gateworks/gw_ventana/common.c
++++ b/board/gateworks/gw_ventana/common.c
+@@ -806,7 +806,7 @@ void setup_pmic(void)
+ /* Set SWBST to 5.0V and enable */
+ pmic_reg_read(p, PFUZE100_SWBSTCON1, ®);
+ reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
+- reg |= (SWBST_5_00V | SWBST_MODE_AUTO);
++ reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT));
+ pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
+ }
+ }
+diff --git a/board/kosagi/novena/novena.c b/board/kosagi/novena/novena.c
+index babba85..b3159d3 100644
+--- a/board/kosagi/novena/novena.c
++++ b/board/kosagi/novena/novena.c
+@@ -216,7 +216,7 @@ int power_init_board(void)
+ /* Set SWBST to 5.0V and enable (for USB) */
+ pmic_reg_read(p, PFUZE100_SWBSTCON1, ®);
+ reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
+- reg |= (SWBST_5_00V | SWBST_MODE_AUTO);
++ reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT));
+ pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
+
+ return 0;
+--
+2.1.4
+
--- /dev/null
+From a80a999c9b5c128cad2f67b4b32036bd4d667904 Mon Sep 17 00:00:00 2001
+From: Marek Vasut <marex@denx.de>
+Date: Thu, 26 Nov 2015 00:18:45 +0100
+Subject: [PATCH 2/2] arm: imx6: novena: Enable extfs support in SPL
+
+Simple patch to enable support for extfs filesystem in SPL,
+this is useful to those who want to avoid vfat like plague.
+
+Signed-off-by: Marek Vasut <marex@denx.de>
+Cc: Stefano Babic <sbabic@denx.de>
+---
+ include/configs/novena.h | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/include/configs/novena.h b/include/configs/novena.h
+index d88389a..4b4f2d7 100644
+--- a/include/configs/novena.h
++++ b/include/configs/novena.h
+@@ -82,6 +82,7 @@
+
+ /* SPL */
+ #define CONFIG_SPL_FAT_SUPPORT
++#define CONFIG_SPL_EXT_SUPPORT
+ #define CONFIG_SPL_MMC_SUPPORT
+ #include "imx6_spl.h" /* common IMX6 SPL configuration */
+
+--
+2.1.4
+
--- /dev/null
+#!/usr/bin/make -f
+
+DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+export DEBIAN_REVISION ?= $(shell dpkg-parsechangelog --show-field Version | sed -e 's,.*+dfsg,+dfsg,')
+export SOURCE_DATE_EPOCH = $(shell date -d "$$(dpkg-parsechangelog --count 1 --show-field Date)" +%s)
+
+ifneq ($(DEB_BUILD_GNU_TYPE),$(DEB_HOST_GNU_TYPE))
+export CROSS_COMPILE ?= $(DEB_HOST_GNU_TYPE)-
+cross_build_tools ?= y
+endif
+
+# support parallel build using DEB_BUILD_OPTIONS=parallel=N
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ DEB_UBOOT_FLAGS += -j$(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+endif
+
+# the upstream build passes LDFLAGS directly to ld instead of calling gcc for
+# linking; so instead of passing -Wl,foo in LDFLAGS as in automake builds, one
+# should set LDFLAGS to foo directly
+comma := ,
+LDFLAGS := $(patsubst -Wl$(comma)%,%,$(LDFLAGS))
+
+%:
+ dh $@ --parallel
+
+override_dh_auto_build: TOOLSDIR := debian/build/tools
+override_dh_auto_build:
+ set -e; sed -n 's/^$(DEB_HOST_ARCH)[[:space:]]\+//p' debian/targets \
+ | while read subarch platform targets; do \
+ builddir=debian/build/$$platform; \
+ targets="$$targets uboot.elf" ;\
+ mkdir -p $$builddir; \
+ $(MAKE) O=$$builddir $${platform}_defconfig; \
+ $(MAKE) $(DEB_UBOOT_FLAGS) O=$$builddir all; \
+ install -m 644 $$builddir/u-boot $$builddir/uboot.elf; \
+ $(CROSS_COMPILE)strip --remove-section=.comment \
+ $$builddir/uboot.elf; \
+ for target in $$targets; do \
+ chmod -x $$builddir/$$target; \
+ echo $$builddir/$$target /usr/lib/u-boot/$$platform/ \
+ >> debian/build/targets.$$subarch; \
+ echo $$platform >> debian/build/platforms.$$subarch; \
+ done ; \
+ case $${subarch} in \
+ sunxi) builddir=$${builddir}_FEL ;\
+ targets="u-boot.bin spl/u-boot-spl.bin" ;\
+ mkdir -p $$builddir ;\
+ $(MAKE) O=$$builddir $${platform}_defconfig; \
+ sed -i -e 's/^# \(CONFIG_SPL_FEL\) is not set/\1=y/g' $$builddir/.config ;\
+ platform="$${platform}_FEL" ;\
+ $(MAKE) $(DEB_UBOOT_FLAGS) O=$$builddir olddefconfig ; \
+ $(MAKE) $(DEB_UBOOT_FLAGS) O=$$builddir $$targets ; \
+ for target in $$targets ; do \
+ chmod -x $$builddir/$$target; \
+ echo $$builddir/$$target /usr/lib/u-boot/$$platform/ \
+ >> debian/build/targets.$$subarch; \
+ done ;; \
+ esac; \
+ done
+
+ # Avoid requirement for .config
+ mkdir -p $(TOOLSDIR)/include/config
+ touch $(TOOLSDIR)/include/config/auto.conf
+ # Load dummy config
+ $(MAKE) O=$(TOOLSDIR) CROSS_COMPILE=$(CROSS_COMPILE) sandbox_defconfig
+ # board-independent tools
+ $(MAKE) O=$(TOOLSDIR) $(DEB_UBOOT_FLAGS) \
+ CROSS_COMPILE=$(CROSS_COMPILE) \
+ CROSS_BUILD_TOOLS=$(cross_build_tools) \
+ NO_SDL=1 \
+ tools-only
+ $(MAKE) O=$(TOOLSDIR) $(DEB_UBOOT_FLAGS) \
+ CROSS_COMPILE=$(CROSS_COMPILE) \
+ NO_SDL=1 \
+ env
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/env/fw_printenv
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/mkimage
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/kwboot
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/mksunxiboot
+
+override_dh_auto_test:
+ # skip tests.
+
+override_dh_clean:
+ rm -rf debian/build/
+ dh_clean
+
+override_dh_gencontrol:
+ debian/bin/update-substvars
+ dh_gencontrol
+
+get-orig-source:
+ # Use uscan from the devscripts package to download new
+ # tarball, remove files incompatible with the DFSG (see
+ # Files-Excluded in debian/copyright), and repack with xz
+ # compression.
+ uscan --download --repack --compression=xz
--- /dev/null
+3.0 (quilt)
--- /dev/null
+tools/logos/solidrun.bmp
--- /dev/null
+# ARCH subarch platform target
+# --------------------------------------------
+armel - dockstar u-boot.kwb
+
+# Ian Campbell <ijc@debian.org>
+armel - dreamplug u-boot.kwb
+
+# drEagle <drEagle@doukki.net>
+armel - guruplug u-boot.kwb
+
+# Vagrant Cascadian <vagrant@debian.org>, rpi B 256M
+armel - rpi u-boot.bin
+armhf - rpi u-boot.bin
+
+# drEagle <drEagle@doukki.net>
+armel - sheevaplug u-boot.kwb
+
+avr32 - hammerhead u-boot.img
+
+mips - qemu_mips u-boot.bin
+
+sh4 - r2dplus u-boot.bin
+
+sh4 - sh7785lcr_32bit u-boot.bin
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets exynos "doc/README.odroid"
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-exynos [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/arndale/uboot.elf
+u-boot-exynos [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/odroid/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-exynos [armhf]: statically-linked-binary usr/lib/u-boot/arndale/uboot.elf
+u-boot-exynos [armhf]: statically-linked-binary usr/lib/u-boot/odroid/uboot.elf
+
+u-boot-exynos: description-synopsis-starts-with-article
--- /dev/null
+misc:Depends=
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+MX53LOCO:
+
+ dd bs=1024 if=u-boot.imx of=/dev/sdX seek=1
+
+wandboard (quad, dual-lite and solo):
+
+ dd if=/usr/lib/u-boot/wandboard/SPL of=/dev/mmcblk0 bs=1k seek=1
+ dd if=/usr/lib/u-boot/wandboard/u-boot.img of=/dev/mmcblk0 bs=1k seek=69
+
+mx6cuboxi (Cubox-i and Hummingboard):
+
+ dd if=/usr/lib/u-boot/mx6cuboxi/SPL of=/dev/mmcblk0 bs=1k seek=1
+ dd if=/usr/lib/u-boot/mx6cuboxi/u-boot.img of=/dev/mmcblk0 bs=1k seek=69
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets imx
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/mx53loco/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/mx6cuboxi/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/nitrogen6q/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/novena/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/udoo/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/usbarmory/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/wandboard/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/mx53loco/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/mx6cuboxi/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/nitrogen6q/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/novena/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/udoo/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/usbarmory/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/wandboard/uboot.elf
+
+u-boot-imx: description-synopsis-starts-with-article
--- /dev/null
+misc:Depends=
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+The BeagleBone Black (am335x_boneblack) can be flashed to microSD or eMMC directly:
+
+ dd if=/usr/lib/u-boot/am335x_boneblack/MLO of=/dev/mmcblkX count=1 seek=1 conv=notrunc bs=128k
+ dd if=/usr/lib/u-boot/am335x_boneblack/u-boot.img of=/dev/mmcblkX count=2 seek=1 conv=notrunc bs=384k
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
+
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets omap "doc/README.nokia_rx51"
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/am335x_boneblack/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/igep0020/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/nokia_rx51/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/omap3_beagle/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/omap4_panda/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/am335x_boneblack/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/igep0020/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/nokia_rx51/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/omap3_beagle/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/omap4_panda/uboot.elf
+
+u-boot-omap: description-synopsis-starts-with-article
--- /dev/null
+misc:Depends=
--- /dev/null
+doc/README.rockchip
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets rockchip "doc/README.rockchip"
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-rockchip [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/firefly-rk3288/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-rockchip [armhf]: statically-linked-binary usr/lib/u-boot/firefly-rk3288/uboot.elf
+
+u-boot-rockchip: description-synopsis-starts-with-article
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+Many sunxi boards (Bananapi, Cubieboard) can be written to SD directly:
+
+ dd if=/usr/lib/u-boot/BOARD/u-boot-sunxi-with-spl.bin of=/dev/mmcblkX bs=1024 seek=8
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets sunxi
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A10-OLinuXino-Lime/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A10s-OLinuXino-M/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-Olimex-SOM-EVB/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-OLinuXino-Lime/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-OLinuXino-Lime2/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-OLinuXino_MICRO/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Bananapi/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Bananapro/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubieboard/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubieboard2/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubietruck/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Lamobo_R1/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Linksprite_pcDuino/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Linksprite_pcDuino3/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Mini-X/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A10-OLinuXino-Lime/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A10s-OLinuXino-M/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-Olimex-SOM-EVB/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-OLinuXino-Lime/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-OLinuXino-Lime2/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-OLinuXino_MICRO/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Bananapi/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Bananapro/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubieboard/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubieboard2/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubietruck/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Lamobo_R1/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Linksprite_pcDuino/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Linksprite_pcDuino3/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Mini-X/uboot.elf
+
+u-boot-sunxi: description-synopsis-starts-with-article
--- /dev/null
+misc:Depends=
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself from a host
+system using the Linux_For_Tegra tools.
+
+sudo ./flash.sh -L /usr/lib/u-boot/jetson-tk1/u-boot-dtb-tegra.bin jetson-tk1 mmcblk1p1
+
+It seems that L4T R19.3.0 is currently required (image does not boot
+if flashed with L4T R21.X).
+
+TODO: Figure out how to do this with tools within Debian,
+e.g. tegracrm and cbootimage.
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets tegra
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-tegra [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/jetson-tk1/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-tegra [armhf]: statically-linked-binary usr/lib/u-boot/jetson-tk1/uboot.elf
+
+u-boot-tegra: description-synopsis-starts-with-article
--- /dev/null
+#!/bin/sh
+
+builddir=debian/build/tools
+for tool in mkimage mkenvimage mksunxiboot kwboot env/fw_printenv ; do
+ echo ${builddir}/tools/${tool} /usr/bin/
+done
+
+echo doc/mkimage.1 /usr/share/man/man1/
+
+# manpages
+echo debian/manpages/fw_printenv.8 /usr/share/man/man8/
+echo debian/manpages/fw_setenv.8 /usr/share/man/man8/
+
+# example env configs
+for env_config in debian/env-configs/*.config ; do
+ echo ${env_config} /usr/share/doc/u-boot-tools/examples/
+done
--- /dev/null
+/usr/bin/fw_printenv /usr/bin/fw_setenv
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+Some examples using mtd-utils:
+
+SheevaPlug:
+
+ sudo flash_erase /dev/mtd0 0 0
+ sudo nandwrite -p /dev/mtd0 /usr/lib/u-boot/sheevaplug/u-boot.kwb
+
+GuruPlug:
+
+ sudo flash_erase /dev/mtd0 0 0
+ sudo nandwrite -p /dev/mtd0 /usr/lib/u-boot/guruplug/u-boot.kwb
+
+DreamPlug:
+
+ At this point you cannot write to the SPI/NOR flash from Linux,
+ so you will need to replace U-Boot from within U-Boot.
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
+
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets -
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/dockstar/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/dreamplug/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/guruplug/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/rpi/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/sheevaplug/uboot.elf
+u-boot [avr32]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/hammerhead/uboot.elf
+u-boot [mips]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/qemu_mips/uboot.elf
+u-boot [sh4]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/r2dplus/uboot.elf
+u-boot [sh4]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/sh7785lcr_32bit/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/dockstar/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/dreamplug/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/guruplug/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/rpi/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/sheevaplug/uboot.elf
+u-boot [avr32]: statically-linked-binary usr/lib/u-boot/hammerhead/uboot.elf
+u-boot [mips]: statically-linked-binary usr/lib/u-boot/qemu_mips/uboot.elf
+u-boot [sh4]: statically-linked-binary usr/lib/u-boot/r2dplus/uboot.elf
+u-boot [sh4]: statically-linked-binary usr/lib/u-boot/sh7785lcr_32bit/uboot.elf
+
+u-boot: description-synopsis-starts-with-article
--- /dev/null
+version=3
+
+opts=pasv,repacksuffix=+dfsg1,uversionmangle=s/-rc/~rc/g,dversionmangle=s/\+dfsg.*//g \
+ftp://ftp.denx.de/pub/u-boot/u-boot-([\d\.].*)\.tar\.bz2
projects / u-boot.git / commitdiff