[dgit import tarball freecad 0.20.2+dfsg1-4+rpi1 freecad_0.20.2+dfsg1-4+rpi1.debian.tar.xz]
--- /dev/null
+freecad (0.18+dfsg1-1) unstable; urgency=low
+
+ FreeCAD is now available in Python 2 and Python 3 versions, with the
+ `freecad` metapackage defaulting to `freecad-python3`. If you want to use
+ the legacy Python 2 package, install `freecad-python2` and switch between
+ the versions using `sudo update-alternatives --config freecad`.
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Sun, 31 Mar 2019 01:58:53 -0500
--- /dev/null
+freecad (0.20.2+dfsg1-4+rpi1) bookworm-staging; urgency=medium
+
+ * Switch armhf from qtwebengine to qtwebkit.
+
+ -- Peter Michael Green <plugwash@raspbian.org> Tue, 28 Feb 2023 01:17:57 +0000
+
+freecad (0.20.2+dfsg1-4) unstable; urgency=medium
+
+ * Team upload.
+ * Apply work-around for crash when started with --single-instance,
+ e.g. using the .desktop file (Closes: #1029846)
+
+ -- Tobias Frost <tobi@debian.org> Sat, 04 Feb 2023 14:01:18 +0100
+
+freecad (0.20.2+dfsg1-3) unstable; urgency=medium
+
+ * [c522953] Remove redundant `freecadcmd --console` in autopkgtest
+ * [0bef48d] Add patch for numpy 1.24
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Tue, 10 Jan 2023 11:08:11 -0600
+
+freecad (0.20.2+dfsg1-2) unstable; urgency=medium
+
+ * [3bfb4a5] Add arch-specific Qt WebKit fallback
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Mon, 09 Jan 2023 19:15:33 -0600
+
+freecad (0.20.2+dfsg1-1) unstable; urgency=medium
+
+ [ Tobias Frost ]
+ * [7556687] Add several supported MIME types to the .desktop file.
+ (Closes: #993089)
+
+ [ Kurt Kremitzki ]
+ * [69cb156] Switch from Qt WebKit to WebEngine
+ * [bdc52cd] New upstream version 0.20.2+dfsg1 (Closes: #1028171)
+ * [1e3598e] Refresh patches
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Mon, 09 Jan 2023 17:00:02 -0600
+
+freecad (0.20.1+dfsg1-2) unstable; urgency=medium
+
+ * Team upload.
+ * autopkgtest: Disable test TestPathApp on s390x.
+
+ -- Tobias Frost <tobi@debian.org> Fri, 09 Sep 2022 17:01:54 +0200
+
+freecad (0.20.1+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+
+ -- Tobias Frost <tobi@debian.org> Fri, 26 Aug 2022 23:58:01 +0200
+
+freecad (0.20+dfsg1-6) unstable; urgency=medium
+
+ * Revert running freecad in the autopkgtest, this needs more work.
+
+ -- Tobias Frost <tobi@debian.org> Thu, 18 Aug 2022 21:30:34 +0200
+
+freecad (0.20+dfsg1-5) unstable; urgency=medium
+
+ * Team upload.
+ * Disable test femtest.app.test_solver_calculix.TestSolverCalculix, as
+ this test is currently broken on some archs. Closes: #1017598.
+ * Run freecad (gui executeable) test suite also in the autopkgtest,
+ in the hope that missing libraries will be caught too (see #1013881).
+
+ -- Tobias Frost <tobi@debian.org> Thu, 18 Aug 2022 12:38:22 +0200
+
+freecad (0.20+dfsg1-4) unstable; urgency=medium
+
+ * Team upload.
+ * Fix FTBFS on armel and armhf, GL_PROJECTION not declared in this scope
+ with patch fix-1014875-arm-FTBFS.patch (Closes: #1014875)
+
+ -- Tobias Frost <tobi@debian.org> Tue, 09 Aug 2022 18:37:51 +0200
+
+freecad (0.20+dfsg1-3) UNRELEASED; urgency=medium
+
+ * d/u/metadata: Added SciCrunch RRID:SCR_022535
+
+ -- Steffen Moeller <moeller@debian.org> Tue, 05 Jul 2022 21:17:32 +0200
+
+freecad (0.20+dfsg1-2) unstable; urgency=medium
+
+ * Team upload.
+ * More verbose description.
+
+ -- Steffen Moeller <moeller@debian.org> Tue, 05 Jul 2022 02:16:00 +0200
+
+freecad (0.20+dfsg1-1) unstable; urgency=medium
+
+ * Team upload.
+ * New upstream version. (Closes: #1007013)
+ * Removed surface_extended_patch.patch - already found upstream
+ * Removed remove_doc-files.patch - no longer applicable/needed
+ * Removed fix_vtk9.patch - addressed upstream
+ * Standards-Version: 4.6.1 (routine-update)
+ * Extended runtime dependencies on python Qt modules as instructed
+ upon execution of freecad.
+
+ -- Steffen Moeller <moeller@debian.org> Mon, 04 Jul 2022 15:29:38 +0200
+
+freecad (0.19.4+dfsg1-1) unstable; urgency=medium
+
+ * Team upload.
+
+ * New upstream version - a bug-fix release
+ Release notes: https://github.com/FreeCAD/FreeCAD/releases/tag/0.19.4
+ - Fixes CVE-2021-45844 (Closes: #1005747)
+ - Fixes CVE-2021-45845
+ * Added link-time optimization
+
+ -- Steffen Moeller <moeller@debian.org> Fri, 04 Mar 2022 16:01:45 +0100
+
+freecad (0.19.3+dfsg1-2) unstable; urgency=medium
+
+ * Team upload.
+
+ [ Håvard Flaget Aasen ]
+ * Move files from /usr/share/freecad/share/* to /usr/share/*
+ * Move appstream files from freecad-common to freecad, specifically
+ /usr/share/applications/*, /usr/share/metainfo/* and /usr/share/mime/*.
+ This will make sofware relying on appstream to install correct package.
+ (Closes: #981175)
+ * Don't install .xpm icon.
+ * Prefer upstream version of desktop and sharedmimeinfo files.
+ * Explicitly list folders to install in freecad-common.
+ * Add patch to include previous set option in desktop file.
+ Making freecad only run as single instance.
+
+ [ Tobias Frost ]
+ * Fix filename of SurfaceExtend icon (Closes: #992715)
+
+ -- Steffen Moeller <moeller@debian.org> Fri, 25 Feb 2022 14:04:59 +0100
+
+freecad (0.19.3+dfsg1-1) unstable; urgency=medium
+
+ * Team upload.
+
+ [ Tobias Frost ]
+ * Tighten dependencies on metapackage, so that the right version
+ of all packages will be pulled on update. (Closes: #980474)
+
+ [ Steffen Moeller ]
+ * Remove trailing whitespace in debian/copyright (routine-update)
+ * Add salsa-ci file (routine-update)
+ * watch file standard 4 (routine-update)
+ * patch/python3.8 adopted upstream
+ * improved d/rules clean target for repeated builds
+
+ -- Tobias Frost <tobi@debian.org> Fri, 22 Oct 2021 12:45:02 +0200
+
+freecad (0.19.2+dfsg1-3) unstable; urgency=medium
+
+ * Team upload.
+ * [6e8d7af] Compile against vtk9 instead of vtk7
+
+ -- Anton Gladky <gladk@debian.org> Sat, 25 Sep 2021 09:52:47 +0200
+
+freecad (0.19.2+dfsg1-2) unstable; urgency=medium
+
+ * [bc42245] Add patch for OpenCASCADE >= 7.5.2
+ * [acc44a0] Add Rules-Requires-Root: no
+ * [8a24737] Add DEP-3 headers to document OpenCASCADE 7.4.0 patch
+ * [cafc615] Update to Standards-Version 4.6.0 (no changes required)
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Mon, 06 Sep 2021 19:13:40 -0500
+
+freecad (0.19.2+dfsg1-1) unstable; urgency=medium
+
+ * [9a27ec0] New upstream version 0.19.2+dfsg1
+ * [cbf49b1] Refresh fix-s390x-test-fail-skip-load-old-file.patch
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Sat, 04 Sep 2021 15:44:21 -0500
+
+freecad (0.19.1+dfsg1-2) unstable; urgency=medium
+
+ * Team upload.
+ * [aed47c1] Fix whitespaces in previous commit from Christian Ehrhardt,
+ breaking python autopkgtests
+
+ -- Gianfranco Costamagna <locutusofborg@debian.org> Tue, 16 Mar 2021 17:55:02 +0100
+
+freecad (0.19.1+dfsg1-1) unstable; urgency=medium
+
+ [ Christian Ehrhardt ]
+ * [fbc90b2] skip self test open_de9b3fb438 on s390x as it goes OOM
+ (LP: #1918474)(Closes: #984952)
+
+ [ Kurt Kremitzki ]
+ * [3ae55a4] New upstream version 0.19.1+dfsg1
+ * [bc2242e] Drop fix-fem-crash.patch, included in 0.19.1
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Mon, 15 Mar 2021 21:00:32 -0500
+
+freecad (0.19+dfsg1-2) unstable; urgency=medium
+
+ * [e19be27] Add patch to fix crash in FEM Constraint::getDirection
+ (Closes: #983590)
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Sun, 28 Feb 2021 03:36:37 -0600
+
+freecad (0.19+dfsg1-1) unstable; urgency=medium
+
+ * [40577ea] New upstream version 0.19+dfsg1
+ * [f346346] Add python3-matplotlib build dependency
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Thu, 25 Feb 2021 11:53:32 -0600
+
+freecad (0.19~pre1+git20210207.a3fb41502b+dfsg-1) unstable; urgency=medium
+
+ * [fc00a73] New upstream version 0.19~pre1+git20210207.a3fb41502b+dfsg
+ * [b1f38b0] Refresh patches
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Sun, 07 Feb 2021 18:46:40 -0600
+
+freecad (0.19~pre1+git20210109.afd1470202+dfsg1-2) unstable; urgency=medium
+
+ * [bcad731] Add python3-yaml runtime dep
+ * [4f5dd12] Set FREECAD_USER_HOME for autopkgtest
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Wed, 20 Jan 2021 10:49:37 -0600
+
+freecad (0.19~pre1+git20210109.afd1470202+dfsg1-1) unstable; urgency=medium
+
+ * [1395c4c] Update freecad-common symlinks (Closes: #980292)
+ * [154c84e] New upstream version 0.19~pre1+git20210109.afd1470202+dfsg1
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Mon, 18 Jan 2021 12:48:25 -0600
+
+freecad (0.19~pre1+git20201221.3b449e1ce9+dfsg1-2) unstable; urgency=medium
+
+ * [2ce772e] Add Breaks+Replaces for libfreecad-python3-0.19 over 0.18
+ (Closes: #976430)
+ * [0046d46] Always only --list-missing
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Thu, 24 Dec 2020 06:54:50 -0600
+
+freecad (0.19~pre1+git20201221.3b449e1ce9+dfsg1-1) unstable; urgency=medium
+
+ * [921e9bc] New upstream version 0.19~pre1+git20201221.3b449e1ce9+dfsg1
+ * [ea5594a] Refresh python3.8.patch
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Mon, 21 Dec 2020 11:23:53 -0600
+
+freecad (0.19~pre1+git20201123.8d73c8f0+dfsg1-1) experimental; urgency=medium
+
+ * [ede52e5] New upstream version 0.19~pre1+git20201123.8d73c8f0+dfsg1
+ * [b8be794] Refresh patches
+ * [5b061b9] Update packaging for 0.19
+
+ -- Kurt Kremitzki <kkremitzki@debian.org> Sun, 29 Nov 2020 03:20:11 -0600
+
+freecad (0.18.4+dfsg2-6) unstable; urgency=medium
+
+ * Team upload.
+ * [63b9bcf] Fix compilation against boost and python3.9.
+ (Closes: #975267, #973285)
+ * [5773c7e] Use secure URI in Homepage field.
+ * [ffb3bbb] Set debhelper-compat version in Build-Depends.
+ * [15de038] Set upstream metadata fields: Repository, Repository-Browse.
+ * [afe02a4] Fix day-of-week for changelog entry 0.7.1031-1.
+ * [159b458] Update standards version to 4.5.0, no changes needed.
+
+ -- Anton Gladky <gladk@debian.org> Thu, 19 Nov 2020 20:50:53 +0100
+
+freecad (0.18.4+dfsg2-5) unstable; urgency=medium
+
+ * [6ef07803] cherry-pick upstream commits:
+ - 17ed2b196a58afbbc3cc1bb99f6eb76060171ad2
+ - 1666b28836baa79b26b707afb1e97c2a0855eb1f
+ - 1bca53917db942aa8e0639c8e2c2f33b2e09c1b0
+ and drop new-pyside2.patch patch
+ * [ 1b8737ca ]Drop depends on python3-pyside2uic,
+ dropped by pyside2 (experimental), and add
+ pyqt5-dev-tools for new pyrcc5 tool
+
+ -- Gianfranco Costamagna <locutusofborg@debian.org> Sun, 07 Jun 2020 14:39:33 +0200
+
+freecad (0.18.4+dfsg2-4) unstable; urgency=medium
+
+ * Team upload
+
+ [ Gianfranco Costamagna ]
+ * [224b2c8a] Drop unused libboost-signals-dev (Closes: #962086)
+
+ [ Graham Inggs ]
+ * [e3aa33cd] Fix TaperedHole test for OCCT 7.4 (Closes: #961131)
+
+ -- Gianfranco Costamagna <locutusofborg@debian.org> Sat, 06 Jun 2020 12:07:18 +0200
+
+freecad (0.18.4+dfsg2-3) unstable; urgency=medium
+
+ * [a1d5760] Disable netgen builds for now
+ * [cbbde84] Add patch for OCCT 7.4 regression test case
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Wed, 20 May 2020 03:48:36 -0500
+
+freecad (0.18.4+dfsg2-2) unstable; urgency=medium
+
+ [ Tobias Frost ]
+ * [b742def] Import Ubuntu patches to fix Python 3.8 FTBFS (Closes: #953721).
+ This also includes some other patches from Ubuntu that are worth as they
+ are fixing crashes. Thanks to Gianfranco for his work in Ubuntu.
+
+ [ Kurt Kremitzki ]
+ * [d56ac71] Correct line ending issue with patch
+ * [599ea99] Add opencascade74.patch (Closes: #956543)
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Tue, 19 May 2020 04:24:52 -0500
+
+freecad (0.18.4+dfsg2-1) unstable; urgency=medium
+
+ * [e8be3d7] New upstream version 0.18.4+dfsg2
+ * [5fefd1a] Don't hardcode Python 3 version (Closes: #950137)
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Tue, 11 Feb 2020 06:26:08 -0600
+
+freecad (0.18.4+dfsg1-2) unstable; urgency=medium
+
+ [ Kurt Kremitzki ]
+ * [1e38838] Revert dwz override after upstream fix
+
+ [ Gianfranco Costamagna ]
+ * Team upload
+ * [84844f5] Tweak rules file to make it use with Python3.7
+ (Closes: #945314), the one used during pyside build
+
+ -- Gianfranco Costamagna <locutusofborg@debian.org> Mon, 30 Dec 2019 11:04:13 +0100
+
+freecad (0.18.4+dfsg1-1) unstable; urgency=medium
+
+ * [3928e77] New upstream version 0.18.4+dfsg1
+ * [55b8edd] Update version display patch for 0.18.4
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Sun, 03 Nov 2019 13:26:10 -0600
+
+freecad (0.18.3+dfsg1-4) unstable; urgency=medium
+
+ * [e768789] Add dh_dwz override for i386, mipsel, and s390x due to upstream
+ regression
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Wed, 30 Oct 2019 22:43:14 -0500
+
+freecad (0.18.3+dfsg1-3) unstable; urgency=medium
+
+ * [c78f8e9] Revert enabling Netgen/Pybind11 builds
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Tue, 17 Sep 2019 11:00:11 -0500
+
+freecad (0.18.3+dfsg1-2) unstable; urgency=medium
+
+ * [898fd80] Migrate to Python 3 only, Netgen-enabled build (Closes:
+ #936552)
+ * [2c077ab] Bump compat level to 12
+ * [276a12e] Bump Standards-Version to 4.4.0 (no changes needed)
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Sun, 08 Sep 2019 17:35:08 -0500
+
+freecad (0.18.3+dfsg1-1) unstable; urgency=medium
+
+ * [5f5b5c2] New upstream version 0.18.3+dfsg1
+ * [6c43d54] Update set_about_freecad.patch for new version
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Thu, 18 Jul 2019 20:12:46 -0500
+
+freecad (0.18.2+dfsg1-1) unstable; urgency=medium
+
+ * [bc5f8c2] New upstream version 0.18.2+dfsg1
+ * [f6afef9] Remove upstream-bugfixes.patch (obsoleted by 0.18.2)
+ * [bb1b36e] Don't save in non-user-writable location by default
+ * [ce51375] Fix missing document icons
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Fri, 07 Jun 2019 22:31:06 -0500
+
+freecad (0.18.1+dfsg1-2) unstable; urgency=medium
+
+ * [5cd3fce] Add missing pyside2 deps
+ * [fd92cc2] Fix breaks+replaces relations (Closes: #926251)
+ * [c61fe87] Add upstream bugfixing patch
+ * [f95e30a] Fix FEM autopkgtest (Closes: #926304 #920535)
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 27 Apr 2019 19:06:02 -0500
+
+freecad (0.18.1+dfsg1-1) unstable; urgency=medium
+
+ * [cab285b] Correct suggested packages
+ * [576bf03] New upstream version 0.18.1+dfsg1
+ * [7cec221] Update rules for 0.18.1
+ * [39bac84] Add patch to display 0.18.1 version
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 06 Apr 2019 13:52:45 -0500
+
+freecad (0.18+dfsg1-1) unstable; urgency=medium
+
+ * [64167ef] New upstream version 0.18+dfsg1
+ * [8c882c8] Remove upstreamed patches fix-start-workbench and
+ fix_qt-5.11_build
+ * [7d77b28] Add NEWS file to announce Python 3 switch
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Thu, 14 Mar 2019 21:43:55 -0500
+
+freecad (0.18~pre1+dfsg1-5) unstable; urgency=medium
+
+ * [e91ae47] Fix update-alternatives problem (Closes: #923465 #923412)
+ * [a7f46c7] Update OpenCASCADE path
+ * [958e27f] Add patch to fix Start WB
+ * [ba149a5] Add lintian override for freecad virtual package
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 02 Mar 2019 03:42:57 -0600
+
+freecad (0.18~pre1+dfsg1-4) unstable; urgency=medium
+
+ * [7865394] Use libqt5opengl5-dev instead of -desktop-dev for armel/armhf
+ builds
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Fri, 15 Feb 2019 14:15:18 -0600
+
+freecad (0.18~pre1+dfsg1-3) unstable; urgency=medium
+
+ * [f852948] Re-add allow-stderr restriction on autopkgtest
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Mon, 11 Feb 2019 13:59:14 -0600
+
+freecad (0.18~pre1+dfsg1-2) unstable; urgency=medium
+
+ * [4f80ffc] Undo accidental autopkgtest reversion
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Sun, 10 Feb 2019 16:48:53 -0600
+
+freecad (0.18~pre1+dfsg1-1) unstable; urgency=medium
+
+ * [e648c8e] Add Breaks+Conflicts+Replaces to smooth upgrade
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 09 Feb 2019 17:56:53 -0600
+
+freecad (0.18~pre1+dfsg1-1~exp1) experimental; urgency=medium
+
+ * [f52bb1e] Update packaging for 0.18
+ * [0b830f4] New upstream version 0.18~pre1+dfsg1
+ * [9b83d5c] Update lintian overrides for 0.18
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Sun, 27 Jan 2019 19:42:09 -0600
+
+freecad (0.17+dfsg1-8) unstable; urgency=medium
+
+ * [9d6a8a1] Add allow-stderr restriction on autopkgtest (Closes: #920525)
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Sat, 26 Jan 2019 18:04:22 -0600
+
+freecad (0.17+dfsg1-7) unstable; urgency=medium
+
+ * [86c1410] Fix autopkgtest command (Closes: #918479)
+ * [d5ee7ff] Update VTK dep to v7
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Fri, 25 Jan 2019 20:33:35 -0600
+
+freecad (0.17+dfsg1-6) unstable; urgency=medium
+
+ * [af5bdfa] Update coin/pivy deps for Coin transition
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Fri, 21 Dec 2018 08:11:47 -0600
+
+freecad (0.17+dfsg1-5) unstable; urgency=medium
+
+ * Upload to unstable
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Thu, 11 Oct 2018 08:14:49 -0500
+
+freecad (0.17+dfsg1-4) experimental; urgency=medium
+
+ * [07492c4] Update dependency to use libqt5opengl5-desktop-dev & exclude
+ armel/armhf
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Thu, 11 Oct 2018 00:37:53 -0500
+
+freecad (0.17+dfsg1-3) experimental; urgency=medium
+
+ * [44d99e3] Remove fail-missing to handle arch-specific builds
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Wed, 10 Oct 2018 02:38:11 -0500
+
+freecad (0.17+dfsg1-2) experimental; urgency=medium
+
+ * [04e05c3] Downgrade VTK dependency back to VTK6
+ * [6f91417] Enable Qt5 builds (Closes: #874877)
+ * [741aae7] Add patch for Qt 5.11 build support
+ * [0939941] Add Breaks+Replaces for FreeCAD < 0.17 (Closes: #906110)
+
+ -- Kurt Kremitzki <kurt@kwk.systems> Mon, 08 Oct 2018 01:32:52 -0500
+
+freecad (0.17+dfsg1-1) experimental; urgency=medium
+
+ * New upstream version 0.17+dfsg1
+ * Update OpenCASCADE dependency to use OCCT instead of OCE
+ * Update VTK dependency to VTK7
+ * Update d/copyright's Files-Excluded section and clean up per lintian
+ warnings
+ * Update Uploaders: add Kurt Kremitzki
+ * Switch default workbench from Start to Part Design due to Qt 4 Webkit
+ deprecation, to be reverted after Qt 5 switch is complete
+ * Removed patches fixed upstream or no longer relevant in 0.17:
+ - fix-836983.patch
+ - fix_FTBFS_on_precise.patch
+ - use_share.patch
+ * Refreshed all other patches including:
+ - remove_webkit.patch: Since this breaks the default Start Workbench,
+ I have updated it to default to Part Design, the new premier WB
+ for this upstream version (i.e. PartDesign Next)
+ * Added lintian override for hardening false positives
+
+ -- Kurt Kremitzki <kkremitzki@gmail.com> Thu, 07 Jun 2018 17:32:47 -0500
+
+freecad (0.16.6712+dfsg1-3) unstable; urgency=medium
+
+ * Team upload
+ * Close Teemu's bug in previous changelog entry
+ * Fix autopkgtest on architectures where char is unsigned by default,
+ thanks Frédéric Bonnard (Closes: #836983)
+ * Install copies of icons since AppStream does not recognize symlinks
+ (Closes: #850965)
+ * Update Uploaders: add Sebastian Kuzminsky
+ remove Adam C. Powell, IV
+
+ -- Graham Inggs <ginggs@debian.org> Mon, 28 May 2018 08:55:04 +0000
+
+freecad (0.16.6712+dfsg1-2) unstable; urgency=medium
+
+ * Team upload.
+
+ [ Teemu Ikonen ]
+ * [a1ddb98] Remove myself from Uploaders. (Closes: #892617)
+
+ [ Anton Gladky ]
+ * [705f952] Update VCS-fields to the salsa-migration
+ * [ddc6548] Set Standards-Version to 4.1.4
+ * [3313fe7] Remove myself from uploaders
+ * [a3ef1ba] Switch to compat-level 11
+ * [6a5a3cb] Remove deprecated Testsuite-field in the d/control
+
+ -- Anton Gladky <gladk@debian.org> Wed, 23 May 2018 22:35:29 +0200
+
+freecad (0.16.6712+dfsg1-1) unstable; urgency=medium
+
+ * [c631550] New upstream version 0.16.6712+dfsg1
+ * [70d3ebc] Refresh patches
+ * [c2f67a5] Remove dependency on Qt4 Webkit. (Closes: #784464)
+ * [31d5630] Set Standards-Version: 4.1.0
+ * [85cc9d9] Change priority to optional
+ * [dc32b52] Set maximal hardening option
+ * [c56abf6] Drop "alpha" from description. (Closes: #868727)
+
+ -- Anton Gladky <gladk@debian.org> Fri, 08 Sep 2017 22:55:20 +0200
+
+freecad (0.16+dfsg2-3) unstable; urgency=medium
+
+ [ Graham Inggs ]
+ * [06c5066] Use PNG and SVG icons instead of XPM (Closes: #850965)
+ * [d40a6a3] Drop debian/menu and do not install XPM icon, see #741573
+ * [d616835] Add Suggests on graphviz and povray (Closes: #849644)
+ * [e25f6a6] Switch to debhelper 10
+ * [f02e70f] Add debian/clean to fix FTBFSx2
+
+ [ Anton Gladky ]
+ * [245dccf] Fix d/copyright.
+ * [3f389af] Apply cme fix dpkg.
+
+ -- Anton Gladky <gladk@debian.org> Fri, 20 Jan 2017 20:05:18 +0100
+
+freecad (0.16+dfsg2-2) unstable; urgency=medium
+
+ * Team upload.
+ [ Anton Gladky ]
+ * Remove freecad-doc from suggests. (Closes: #827734)
+
+ [ Nobuhiro Iwamatsu ]
+ * Fix FTBFS with opencv 3.1. (Closes: #841416)
+
+ -- Anton Gladky <gladk@debian.org> Wed, 23 Nov 2016 05:20:31 +0900
+
+freecad (0.16+dfsg2-1) unstable; urgency=medium
+
+ * [4f08de5] Remove data/examples. (Closes: #745237)
+ * [7434cc4] Imported Upstream version 0.16+dfsg2
+
+ -- Anton Gladky <gladk@debian.org> Sun, 15 May 2016 12:29:42 +0200
+
+freecad (0.16+dfsg1-1) unstable; urgency=medium
+
+ * [9e69a23] Update d/watch.
+ * [bf22c89] Drop copying of Version.h explicitly.
+ * [010b5c8] Refresh/Remove patches.
+ * [24a4f7d] Update d/copyright.
+ * [0547be9] Apply cme fix dpkg-control.
+ * [fc9b859] Update d/copyright.
+ * [6e5df4d] Imported Upstream version 0.16+dfsg1. (Closes: #823816)
+ * [06ed39b] Remove freecad-dev and freecad-doc binaries.
+ * [94c3ac2] Update d/copyright. (Closes: #726805 #745237)
+
+ -- Anton Gladky <gladk@debian.org> Thu, 12 May 2016 20:48:30 +0200
+
+freecad (0.15.4671+dfsg1-4) unstable; urgency=medium
+
+ * [a934100] Add strict dependency on oce>=0.17.1. (Closes: #802517)
+
+ -- Anton Gladky <gladk@debian.org> Fri, 29 Jan 2016 13:10:48 +0100
+
+freecad (0.15.4671+dfsg1-3) unstable; urgency=medium
+
+ [ Abdullah Tahiri ]
+ * [f4d259b] Fix Sketcher: Solver: FullPivLU::compute for Eigen-3.3.
+ (Closes: #811239)
+
+ -- Anton Gladky <gladk@debian.org> Sun, 17 Jan 2016 13:44:36 +0100
+
+freecad (0.15.4671+dfsg1-2) unstable; urgency=medium
+
+ * [0c78ef5] Remove EIGEN2_SUPPORT. (Closes: #786356)
+
+ -- Anton Gladky <gladk@debian.org> Sun, 25 Oct 2015 18:51:47 +0100
+
+freecad (0.15.4671+dfsg1-1) unstable; urgency=medium
+
+ * [4b6e554] Update d/copyright.
+ * [dd370f0] Update d/watch.
+ * [a70bba6] Imported Upstream version 0.15.4671+dfsg1. (Closes: #789105)
+ * [80ccaac] Refresh patches.
+ * [c868df9] Add pyside-tools as dependency.
+ * [ab8015b] Drop the load of news-page. (Closes: #787948)
+
+ -- Anton Gladky <gladk@debian.org> Thu, 27 Aug 2015 22:54:47 +0200
+
+freecad (0.14.3702+dfsg-4) unstable; urgency=medium
+
+ [ Anton Gladky ]
+ * [7dbbdb6] Set Standards-Version: 3.9.6. No changes.
+ * [99c5e82] Apply cme fix dpkg-control.
+
+ [ Martin Pitt ]
+ * [91ef5e9] Work around Qt4 not being compatible with boost+gcc5.
+ (Closes: #795069)
+
+ -- Anton Gladky <gladk@debian.org> Wed, 12 Aug 2015 20:34:02 +0200
+
+freecad (0.14.3702+dfsg-3) unstable; urgency=medium
+
+ [ Yorik van Havre ]
+ * [9ddbf15] Disable automatic DXF library download. (Closes: #764814)
+
+ -- Anton Gladky <gladk@debian.org> Fri, 24 Oct 2014 18:59:03 +0200
+
+freecad (0.14.3702+dfsg-2) unstable; urgency=medium
+
+ [ Anton Gladky ]
+ * [aafcc31] Remove libswscale-dev from BD. (Closes: #757282)
+ * [81d4b6e] Fix installing of som Mods. (Closes: #736273)
+ * [1a4492e] Remove deprecated lines from d/copyright. (Closes: #745237)
+
+ [ Alexander ]
+ * [efc7d53] Fix compilation with clang. (Closes: #755305)
+
+ -- Anton Gladky <gladk@debian.org> Sun, 24 Aug 2014 08:12:43 +0200
+
+freecad (0.14.3702+dfsg-1) unstable; urgency=medium
+
+ * [7fc727b] Imported Upstream version 0.14.3702
+ * [3edf0de] Refresh patches.
+ * [077b63a] Redirect unittest output into stdout. Fixes autopkgtests.
+
+ -- Anton Gladky <gladk@debian.org> Tue, 22 Jul 2014 20:15:18 +0200
+
+freecad (0.13.3637-dfsg-1) unstable; urgency=medium
+
+ * [ddeee1c] Imported Upstream version 0.13.3637-dfsg
+ * [0fe87be] Update/remove patches.
+ * [60ad7cc] Update install files, dependencies.
+ * [9f9cca3] Add autopkgtest.
+
+ -- Anton Gladky <gladk@debian.org> Sun, 25 May 2014 19:05:13 +0200
+
+freecad (0.13.2935-dfsg-1.1) unstable; urgency=low
+
+ * Non-maintainer upload.
+ * Update xerces build dependency to libxerces-c-dev. (Closes: #733072)
+
+ -- Jay Berkenbilt <qjb@debian.org> Wed, 15 Jan 2014 12:19:37 -0500
+
+freecad (0.13.2935-dfsg-1) unstable; urgency=medium
+
+ * [824153f] Move python-collada and python-ply from Recommends to Depends.
+ * [3047a6b] Imported Upstream version 0.13.2935-dfsg
+ * [36a4082] Bump Standards-Version: 3.9.5. No changes.
+
+ -- Anton Gladky <gladk@debian.org> Wed, 01 Jan 2014 20:29:15 +0100
+
+freecad (0.13.2800-dfsg-1) unstable; urgency=low
+
+ * [e051565] Imported Upstream version 0.13.2800-dfsg. (Closes: #730952)
+ * [a2f0187] Update debian/copyright. (Closes: #726805)
+
+ -- Anton Gladky <gladk@debian.org> Mon, 02 Dec 2013 22:11:10 +0100
+
+freecad (0.13.2580-dfsg-2) unstable; urgency=low
+
+ * [2aab6f0] Update and re-enable disable_memory_check.patch.
+ * [4d36847] Use wrap-and-sort.
+
+ -- Anton Gladky <gladk@debian.org> Mon, 30 Sep 2013 18:49:23 +0200
+
+freecad (0.13.2580-dfsg-1) unstable; urgency=low
+
+ [ Anton Gladky ]
+ * [1190215] Update get_git_orig_src.sh.
+ * [077e969] Build against BSD-version of soqt. (Closes: #617613)
+ * [37d60d0] Update patches, remove some of them.
+ * [b4801bc] Simplify debian/rules.
+ * [40ddd86] Imported Upstream version 0.13.2580-dfsg
+ * [61e7426] Minor fix in installation files.
+ * [fcaeb91] Fix syntax error in importOCA.py.
+ * [429db74] Ignore quilt dir
+ * [ffccc7d] Unapply patches after build
+
+ [ Sebastian Hoogen ]
+ * [aa8ab82] Use packaged version of python-ply.
+
+ -- Anton Gladky <gladk@debian.org> Fri, 27 Sep 2013 19:56:46 +0200
+
+freecad (0.13.1830-dfsg-3) unstable; urgency=low
+
+ [ Simon Ruderich ]
+ * [71fd1c2] Hardening CPPFLAGS and LDFLAGS. (Closes: #711243)
+
+ [ Peter Michael Green ]
+ * [36d7879] Fix build failures with new oce by forcing occ include directory.
+ (Closes: 718545, 717034)
+ * [7fa3e69] Remove some stuff left behind by build process in clean target
+ to prevent errors from dpkg-source when building multiple times
+ in a row.
+ - obj-*
+ - src/Mod/Start/Gui/share
+ - src/Mod/Drawing/App/share
+
+ [ Anton Gladky ]
+ * [5906d0e] Update debian-copyright-file.
+ * [07d04d1] Move python-collada from Depends to Recommends-section.
+ * [cf6cb9f] Add python-collada to Depends.
+ * [36b4bc0] Add versioned dependency on libsoqt4-20. (Closes: #711812)
+ * [32738be] Use canonical VCS.
+
+ -- Anton Gladky <gladk@debian.org> Wed, 07 Aug 2013 23:43:36 +0200
+
+freecad (0.13.1830-dfsg-2) unstable; urgency=low
+
+ * [800a2d9] Compile freecad against libcoin80. (Closes: #617613)
+ * [abee4e5] Compile against fltk1.3 instead of fltk1.1
+ * [23916ae] Raise the minimal version of soqt4-dev due to coin80.
+ * [87207ba] Update homepage.
+ * [224f12d] Add versioned dependency on python-pivy.
+
+ -- Anton Gladky <gladk@debian.org> Thu, 30 May 2013 19:48:30 +0200
+
+freecad (0.13.1830-dfsg-1) unstable; urgency=low
+
+ [ Boris Pek ]
+ * [fbdfc08] Update debian/rules: use src/Build/Version.h provided by upstream.
+ (Closes: #706578)
+ * [eb29048] Update scripts/get_git_orig_src.sh: - change version format.
+
+ -- Anton Gladky <gladk@debian.org> Thu, 02 May 2013 23:05:20 +0200
+
+freecad (0.13.1830-dfsg-1~exp1) experimental; urgency=low
+
+ * [0175d6f] Add python-matplotlib to depends-section.
+ * [eb9bc9a] Imported Upstream version 0.13.1830-dfsg
+ * [e2ec220] Use Standards-Version: 3.9.4. No changes.
+ * [25815b6] Remove obsolete DM-Upload-Allowed flag.
+ * [24f4cd0] Update dates in copyright-file.
+
+ -- Anton Gladky <gladk@debian.org> Mon, 04 Feb 2013 22:11:12 +0100
+
+freecad (0.13~20130106.gitafb3355-exp1) experimental; urgency=low
+
+ * [0efcf90] Imported Upstream version 0.13~20130106.gitafb3355
+ * [a5ddc03] Install missing usr/share. (Closes: #697573)
+
+ -- Anton Gladky <gladky.anton@gmail.com> Thu, 10 Jan 2013 18:45:11 +0100
+
+freecad (0.13~20121120.git5082ae2-2~exp2) experimental; urgency=low
+
+ * [bcc4f2e] Enable dir_as_string.patch.
+ * [41e4a4e] Fix python-warning during install.
+
+ -- Anton Gladky <gladky.anton@gmail.com> Fri, 23 Nov 2012 22:11:25 +0100
+
+freecad (0.13~20121120.git5082ae2-1) experimental; urgency=low
+
+ [ Sandro Knauß ]
+ * [3d64502] Adding libode-dev, libspnav-dev to Builddeps.
+ Remove all autotool Builddeps.
+ * [c432199] use more debianize directories in debian/rules.
+ * [0a1599d] Add debian/patches/dir_as_string.patch.
+ * [217ec7c] Add debian/patches/use_install_rpath.patch.
+ * [36766ed] Add debian/patches/use_share.pach.
+
+ [ Anton Gladky ]
+ * [96fc2ed] Use cmake for git-version of freecad.
+ * [581b23b] Prepare for 0.13rc
+ * [d9b01ef] Fix compilation.
+ * [197b945] Add script for getting freecad from git-repo.
+ * [ebae551] Imported Upstream version 0.13~20121120.git5082ae2
+
+ -- Anton Gladky <gladky.anton@gmail.com> Tue, 20 Nov 2012 19:22:23 +0100
+
+freecad (0.12.5284-dfsg-7) unstable; urgency=low
+
+ * [b420ea0] Add -fpermissive to cpp, c-flags to fix FTBFS with gcc-4.7.
+
+ -- Anton Gladky <gladky.anton@gmail.com> Mon, 14 May 2012 19:32:10 +0200
+
+freecad (0.12.5284-dfsg-6) unstable; urgency=low
+
+ * [d31cbf4] Disable python-pivy depends on powerpc.
+
+ -- Anton Gladky <gladky.anton@gmail.com> Thu, 12 Apr 2012 21:05:36 +0200
+
+freecad (0.12.5284-dfsg-5) unstable; urgency=low
+
+ * [4d3e1c0] Do not build freecad parallel, it causes FTBFS sometimes ( -j5).
+ * [d749637] Fix FTBFS during compiling against oce-0.9.1.
+ Thanks to Denis Barbier. (Closes: #664207)
+ * [28cb8ba] Fix bug of identifying SWIG version.
+ Thanks to Werner Mayer <werner.wm.mayer@gmx.de>.
+ (Closes: #646374)
+ * [fde200f] Use Standards-Version 3.9.3. No changes.
+ * [595a19e] Minor update of copyright file due to released DEP-5.
+ * [65ef554] Enable HAVE_SWIG option.
+ * [1af4c8a] Fix crash in Help->About menu. (Closes: #663704)
+
+ -- Anton Gladky <gladky.anton@gmail.com> Sun, 18 Mar 2012 08:51:19 +0100
+
+freecad (0.12.5284-dfsg-4) unstable; urgency=low
+
+ * [84c5407] Add needed #include. Fix compilation on Ubuntu Precise.
+ * [7b3d15a] Move python-pivy from recommends to depends section.
+ (Closes: #646374)
+ * [9136519] Update homepage section.
+ * [da53f03] Raise dh-compat to version 8.
+
+ -- Anton Gladky <gladky.anton@gmail.com> Fri, 17 Feb 2012 19:59:20 +0100
+
+freecad (0.12.5284-dfsg-3) unstable; urgency=low
+
+ * [da3974a] Switch from opencascade to oce. (Closes: #659133)
+
+ -- Anton Gladky <gladky.anton@gmail.com> Thu, 09 Feb 2012 20:55:05 +0100
+
+freecad (0.12.5284-dfsg-2) unstable; urgency=low
+
+ * [125b5f6] Add libeigen3-dev to "depends" in freecad-dev.
+ * Rebuild due to opencv-transition.
+
+ -- Anton Gladky <gladky.anton@gmail.com> Sun, 22 Jan 2012 20:07:21 +0100
+
+freecad (0.12.5284-dfsg-1) unstable; urgency=low
+
+ * [99b66f2] Imported Upstream version 0.12.5284-dfsg
+ * [dc52b9c] Remove patch (gcc-4.6 compilation), hopefully applied by upstream.
+ * [f66ef5d] Remove patch (typo).
+ * [ce862a0] Update copyright file (add data-files).
+ * [91d5731] Use eigen3 instead of eigen2.
+
+ -- Anton Gladky <gladky.anton@gmail.com> Mon, 09 Jan 2012 21:29:18 +0100
+
+freecad (0.11.4446-dfsg-4) unstable; urgency=low
+
+ * [d3ec609] Make a line in changelog shorter. Fix lintian-warning.
+ * [df77453] Fix (hopefully) FTBFS on Armel. Thanks to Paul Brook.
+ (Closes: #623559)
+
+ -- Anton Gladky <gladky.anton@gmail.com> Fri, 28 Oct 2011 20:25:21 +0200
+
+freecad (0.11.4446-dfsg-3) unstable; urgency=low
+
+ * [12d6b55] Add -lrt key in LDFLAGS to configure properly opencascade on
+ kfreebsd.
+ * [bbd8acc] Remove .la files from -dev binary.
+ * [8932ee7] Disable memory check in SMDS. (Closes: #623560).
+
+ -- Anton Gladky <gladky.anton@gmail.com> Sat, 24 Sep 2011 16:35:30 +0200
+
+freecad (0.11.4446-dfsg-2) unstable; urgency=low
+
+ * [93347cc] Switch off SWIG to fix FTBFS. (Closes: #632348)
+
+ -- Anton Gladky <gladky.anton@gmail.com> Tue, 05 Jul 2011 22:41:21 +0200
+
+freecad (0.11.4446-dfsg-1) unstable; urgency=low
+
+ [ Teemu Ikonen ]
+ * [58f7907] Copyright: Update.
+
+ [ Anton Gladky ]
+ * [f5d9322] Imported Upstream version 0.11.4446-dfsg. (Closes: #576653).
+ * [aeacc72] Add DM-Upload-Allowed field.
+ * [b08f851] Add changes to debian/rules as suggested by Werner Mayer.
+ * [c82751a] Delete old patches.
+ * [e71109f] Add libopencascade-ocaf-dev to BD.
+ * [9746063] Import patch to fix compilation error with GCC-4.6.
+ * [175e959] Update watch file.
+ * [7989aa6] Update debian/rules to dh 7, thanks to Bernhard R. Link.
+
+ -- Anton Gladky <gladky.anton@gmail.com> Thu, 09 Jun 2011 21:27:03 +0200
+
+freecad (0.11.3729.dfsg-2) unstable; urgency=low
+
+ * Add gfortran and libopencascade-visualization-dev to BD
+ to fix FTBFS (closes: #622694)
+ * Add libqtwebkit-dev to BD (closes: #618241)
+ * Delete quilt from BD and corresponding changes in rules.
+ * Add description to freecad-occ650.patch
+ * Delete encoding string from .desktop
+ * Fix some spelling errors, pointed out by lintian.
+
+ -- Anton Gladky <gladky.anton@gmail.com> Thu, 14 Apr 2011 10:23:25 +0100
+
+freecad (0.11.3729.dfsg-1) unstable; urgency=low
+
+ [ Denis Barbier ]
+ * Merge OpenCASCADE 6.5.0 compatibility patch (closes: #617545).
+
+ [ Adam C. Powell, IV ]
+ * New upstream (closes: #622213, #618241).
+ * Changed to source format 3.0 (quilt).
+ * Added patch target which forces autotools to run, and automake and autoconf
+ are now in Build-Depends (closes: #607181).
+ * Set aside src/Build/Version.h to prevent build problems.
+ * Does not install .la files (closes: #621298).
+ * Boost 1.46 compatibility patch (closes: #621877).
+ * Set aside files which autotools modifies so clean works.
+ * Added libtool to Build-Depends (thanks: PICCA Frédéric-Emmanuel).
+ * Bumped Standards-Version, no changes needed.
+
+ -- "Adam C. Powell, IV" <hazelsct@debian.org> Tue, 12 Apr 2011 23:40:30 -0400
+
+freecad (0.10.3247.dfsg-2) unstable; urgency=low
+
+ * control:
+ - Update to standars-version 3.9.0.
+ - Remove libblas-dev, libatlas-dev from build-deps.
+ * Add debian/shlibs.local file containing the the correct binary dep
+ to libsoqt4-20 (closes: #575239).
+ * copyright: Add a verbatim copy of Tiddlywiki BSD license. Fixes
+ the lintian warning copyright-refers-to-deprecated-bsd-license-file.
+ * Add kFreeBSD portability fixes. Thanks to Petr Salinger
+ <Petr.Salinger@seznam.cz> for the patch (closes: #592461).
+
+ -- Teemu Ikonen <tpikonen@gmail.com> Wed, 18 Aug 2010 19:34:36 +0200
+
+freecad (0.10.3247.dfsg-1) unstable; urgency=low
+
+ * New upstream version (closes: #582627)
+ * Add debian/source/format file with contents "1.0".
+ * Use freecad.xpm as icon in menu and desktop files.
+ * copyright: Add licensing information for new files in this release.
+ * src/Base/Makefile.in, src/Gui/Makefile.in: Do not remove *.tab.c files
+ in make distclean target.
+ * control:
+ - Add build-dep to libeigen2-dev.
+ - Update to standards-version 3.8.4.
+
+ -- Teemu Ikonen <tpikonen@gmail.com> Mon, 05 Jul 2010 15:07:49 +0200
+
+freecad (0.9.2646.5.dfsg-1) unstable; urgency=low
+
+ * Add 'dfsg' extension to upstream version, upstream sources are unchanged.
+ * Remove libgl1-mesa-dev build-dep, rely on libcoin to pull in GL libraries.
+ * Change build-dep libatlas-headers to libatlas-dev (closes: #577309).
+
+ -- Teemu Ikonen <tpikonen@gmail.com> Fri, 14 May 2010 17:20:35 +0200
+
+freecad (0.9.2646.5-1) unstable; urgency=low
+
+ * New upstream version (closes: #561696).
+ * Added swig to Build-Depends (closes: #563523, #563772).
+ * Removed python-opencv from Build-Depends and Recommends (closes: #560768).
+
+ -- "Adam C. Powell, IV" <hazelsct@debian.org> Mon, 11 Jan 2010 08:48:33 -0500
+
+freecad (0.9.2646.4-1) unstable; urgency=low
+
+ * New upstream version (closes: #559849, #559846).
+
+ -- "Adam C. Powell, IV" <hazelsct@debian.org> Fri, 11 Dec 2009 20:21:32 -0500
+
+freecad (0.9.2646.3-1) unstable; urgency=low
+
+ * New upstream version. Removes TiddlySaver.jar, fixes help problems.
+
+ -- Teemu Ikonen <tpikonen@gmail.com> Thu, 03 Dec 2009 19:39:27 +0100
+
+freecad (0.9.2646-1) unstable; urgency=low
+
+ [ Werner Mayer ]
+ * New upstream release
+ * In-source copy of PyCXX has been dropped (closes: #547936)
+ * In-source copy of zipios++ has been dropped (closes: #547941)
+ * Change build-dependency on python2.5-dev to python-dev
+ * Add freecad-doc binary package
+ * Remove Suggestion of a chm viewer, suggest freecad-doc instead
+
+ [ Teemu Ikonen ]
+ * Add override to dh_compress
+ * Add versioned build-deb to debhelper (>= 7.0.50)
+ * Add build-deps to libzipios++-dev and python-cxx-dev.
+
+ -- Teemu Ikonen <tpikonen@gmail.com> Tue, 17 Nov 2009 14:22:00 +0100
+
+freecad (0.8.2237-2) unstable; urgency=low
+
+ * Added libboost-python-dev to Build-Depends (closes: #549738).
+ * Added myself to uploaders list.
+ * Bumped Standards-Version.
+
+ -- "Adam C. Powell, IV" <hazelsct@debian.org> Thu, 12 Nov 2009 12:02:42 -0500
+
+freecad (0.8.2237-1) unstable; urgency=low
+
+ * New Upstream release
+
+ -- Teemu Ikonen <tpikonen@gmail.com> Thu, 16 Jul 2009 18:37:41 +0200
+
+freecad (0.7.1658-1) UNRELEASED; urgency=low
+
+ * New upstream release
+
+ -- Teemu Ikonen <tpikonen@gmail.com> Mon, 20 Oct 2008 15:35:58 +0200
+
+freecad (0.7.1514-1) UNRELEASED; urgency=low
+
+ * New upstream version
+ * Add more stuff to the copyright file
+ * control: add build-dep to python-central
+
+ -- Teemu Ikonen <tpikonen@gmail.com> Wed, 06 Aug 2008 18:25:02 +0200
+
+freecad (0.7.1350-1hardy1) UNRELEASED; urgency=low
+
+ * Package for Ubuntu 8.04 (Hardy Heron)
+
+ -- Werner Mayer <wmayer@users.sourceforge.net> Thu, 29 May 2008 11:11:20 +0200
+
+freecad (0.7.1350-1gutsy1) UNRELEASED; urgency=low
+
+ * Backport to Ubuntu 7.10 (Gutsy Gibbon)
+
+ -- Werner Mayer <wmayer@users.sourceforge.net> Sat, 24 May 2008 01:54:39 +0200
+
+freecad (0.7.1350-1feisty1) UNRELEASED; urgency=low
+
+ * Backport to Ubuntu 7.04 (Feisty Fawn)
+
+ -- Werner Mayer <wmayer@users.sourceforge.net> Sat, 24 May 2008 00:09:08 +0200
+
+freecad (0.7.1350-1) UNRELEASED; urgency=low
+
+ * New upstream release from sf.net
+ * Import to debian-science repository at git.debian.org
+ * control:
+ - Update to standards-version 3.7.3
+ - Add Vcs-* fields pointing to git.debian.org
+ - Improve descriptions
+ * Convert copyright to (pseudo) machine readable format, audit source
+ * Fix categories in .desktop file
+ * Change Section to Science/Engineering in .doc-base and menu files
+ * rules: do not ignore errors on clean target, add dh_desktop call
+ -- Teemu Ikonen <tpikonen@gmail.com> Tue, 05 Aug 2008 18:58:07 +0200
+
+freecad (0.7.1344-1ubuntu2) UNRELEASED; urgency=low
+
+ * New package with fixed self-dependency problem
+
+ -- Werner Mayer <wmayer@users.sourceforge.net> Thu, 22 May 2008 15:34:34 +0200
+
+freecad (0.7.1344-1ubuntu1) UNRELEASED; urgency=low
+
+ * New debian package for Feisty
+
+ -- Werner Mayer <wmayer@users.sourceforge.net> Thu, 22 May 2008 11:04:06 +0200
+
+freecad (0.7.1344-1) UNRELEASED; urgency=low
+
+ * Write patch file to make builds with OpenCASCADE libs inside but with no
+ dependency to libopencascade6.2
+
+ -- Werner Mayer <wmayer@users.sourceforge.net> Wed, 21 May 2008 10:06:07 +0200
+
+freecad (0.7.1343-1) UNRELEASED; urgency=low
+
+ * Embed required OpenCASCADE libs into this package as long as no official
+ Debian package is available
+
+ -- Werner Mayer <wmayer@users.sourceforge.net> Tue, 20 May 2008 00:40:39 +0200
+
+freecad (0.7.1342-1) UNRELEASED; urgency=low
+
+ * Switch to new versioning scheme of OpenCASCADE packages
+
+ -- Werner Mayer <wmayer@users.sourceforge.net> Mon, 19 May 2008 23:55:31 +0200
+
+freecad (0.7.1316-1) UNRELEASED; urgency=low
+
+ * Support of pivy (Python binding for Coin/SoQt)
+ * Support of PyQt4
+ * General support of SWIG modules
+
+ -- Werner Mayer <wmayer@users.sourceforge.net> Sat, 26 Apr 2008 13:51:25 +0200
+
+freecad (0.7.1031-1) UNRELEASED; urgency=low
+
+ * Qt4 port finished
+ * Support of Python binding for Qt4
+ * Support of Python binding for Coin
+ * Support of entirely in Python written modules
+ * Added support of model driven architecture for Python binding
+ * Use boost's signal/slot mechanism to update data
+
+ -- Werner Mayer <wmayer@users.sourceforge.net> Fri, 04 Jan 2008 13:50:37 +0200
+
+freecad (0.7.645-1) UNRELEASED; urgency=low
+
+ * Qt4 port started
+
+ -- Werner Mayer <wmayer@users.sourceforge.net> Tue, 24 Jul 2007 13:04:37 +0200
+
+freecad (0.6.472-1) UNRELEASED; urgency=low
+
+ * Initial Release
+
+ -- Werner Mayer <wmayer@users.sourceforge.net> Tue, 26 Sep 2006 16:55:15 +0200
--- /dev/null
+src/Tools/generateBase/*.pyc
+src/Tools/generateTemplates/*.pyc
--- /dev/null
+Source: freecad
+Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
+Uploaders: Sebastian Kuzminsky <seb@highlab.com>,
+ Kurt Kremitzki <kkremitzki@debian.org>
+Section: science
+Priority: optional
+Build-Depends: cmake,
+ debhelper-compat (= 13),
+ dh-exec,
+ dh-python,
+ libboost-date-time-dev,
+ libboost-dev,
+ libboost-filesystem-dev,
+ libboost-graph-dev,
+ libboost-iostreams-dev,
+ libboost-program-options-dev,
+ libboost-python-dev,
+ libboost-regex-dev,
+ libboost-serialization-dev,
+ libboost-thread-dev,
+ libcoin-dev,
+ libdouble-conversion-dev,
+ libglew-dev,
+ liblz4-dev,
+ libopencv-dev,
+ libeigen3-dev,
+ libgts-bin,
+ libgts-dev,
+ libkdtree++-dev,
+ libmedc-dev,
+ libmetis-dev,
+ libocct-data-exchange-dev,
+ libocct-ocaf-dev,
+ libocct-visualization-dev,
+ libproj-dev,
+ libpyside2-dev,
+ libqt5opengl5-dev,
+ libqt5svg5-dev,
+ libqt5webkit5-dev [!amd64 !arm64 !i386 !mips64el !mipsel],
+ libqt5xmlpatterns5-dev,
+ libqt5x11extras5-dev,
+ libshiboken2-dev,
+ libspnav-dev,
+ libvtk9-dev,
+ libx11-dev,
+ libxerces-c-dev,
+ libzipios++-dev,
+ lsb-release,
+ occt-draw,
+ pybind11-dev,
+ pyqt5-dev-tools,
+ pyside2-tools,
+ python3-dev,
+ python3-matplotlib,
+ python3-ply,
+ python3-pyside2.qtcore,
+ python3-pyside2.qtgui,
+ python3-pyside2.qtsvg,
+ python3-pyside2.qtuitools,
+ python3-pyside2.qtwidgets,
+ python3-pyside2.qtxml,
+ python3-requests,
+ qtbase5-dev,
+ qttools5-dev,
+ qtwebengine5-dev [amd64 arm64 i386 mips64el mipsel],
+ swig
+Build-Depends-Indep: doxygen
+Standards-Version: 4.6.1
+Vcs-Browser: https://salsa.debian.org/science-team/freecad
+Vcs-Git: https://salsa.debian.org/science-team/freecad.git
+Homepage: https://freecadweb.org/
+Rules-Requires-Root: no
+
+Package: freecad
+Architecture: all
+Depends: freecad-python3 (>= ${source:Version}),
+ freecad-python3 (<< ${source:Version}.1~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: calculix-ccx,
+ graphviz
+Suggests: povray
+Breaks: freecad (<< 0.18)
+Replaces: freecad (<< 0.18)
+Description: Extensible Open Source CAx program
+ For 3D printing, CNC milling or for the manual assembly of complicated
+ constructs one needs a formal specification of the workpiece, i.e.,
+ its parts and how these come together. The process to get there is
+ called Computer-Aided Design (CAD). The process to transform a CAD
+ model into a series of instructions that can be performed on a machine
+ is called Computer-Aided Manufacturing (CAM). FreeCAD can do both, the
+ prior yet a bit better than the latter.
+ .
+ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
+ It features some key concepts like macro recording, workbenches, ability
+ to run as a server and dynamically loadable application extensions and
+ it is designed to be platform independent.
+ .
+ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
+ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
+ Editing and modeling features are currently somewhat limited.
+ .
+ This is a metapackage of FreeCAD component packages.
+
+Package: freecad-python3
+Architecture: any
+Depends: freecad-common (= ${source:Version}),
+ python3-matplotlib,
+ python3-pivy,
+ python3-ply,
+ python3-pyside2.qtcore,
+ python3-pyside2.qtgui,
+ python3-pyside2.qtnetwork,
+ python3-pyside2.qtsvg,
+ python3-pyside2.qtuitools,
+ python3-pyside2.qtwidgets,
+ python3-pyside2.qtxml,
+ python3-yaml,
+ libfreecad-python3-0.20 (= ${binary:Version}),
+ ${misc:Depends},
+ ${python3:Depends},
+ ${shlibs:Depends}
+Recommends: python3-pyside2.qtwebchannel,
+ python3-pyside2.qtwebengine,
+ python3-pyside2.qtwebenginecore,
+ python3-pyside2.qtwebenginewidgets
+Breaks: libfreecad-python2-0.17
+Replaces: libfreecad-python2-0.17
+Description: Extensible Open Source CAx program - Python 3 binaries
+ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
+ It features some key concepts like macro recording, workbenches, ability
+ to run as a server and dynamically loadable application extensions and
+ it is designed to be platform independent.
+ .
+ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
+ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
+ Editing and modeling features are currently somewhat limited.
+ .
+ This package contains the FreeCAD binaries built against Python 3.
+
+Package: freecad-common
+Architecture: all
+Depends: ${misc:Depends},
+ ${shlibs:Depends}
+Breaks: freecad (<< 0.18),
+ freecad-python2 (<< 0.18),
+ freecad-runtime (<< 0.20)
+Replaces: freecad (<< 0.18),
+ freecad-python2 (<< 0.18),
+ freecad-runtime (<< 0.20)
+Multi-Arch: foreign
+Description: Extensible Open Source CAx program - common files
+ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
+ It features some key concepts like macro recording, workbenches, ability
+ to run as a server and dynamically loadable application extensions and
+ it is designed to be platform independent.
+ .
+ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
+ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
+ Editing and modeling features are currently somewhat limited.
+ .
+ This package contains FreeCAD common files and resources.
+
+Package: libfreecad-python3-0.20
+Architecture: any
+Section: libs
+Depends: ${misc:Depends},
+ ${shlibs:Depends}
+Breaks: libfreecad-python3-0.18,libfreecad-python3-0.19
+Replaces: libfreecad-python3-0.18,libfreecad-python3-0.19
+Description: Extensible Open Source CAx program - Python 3 library files
+ FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python.
+ It features some key concepts like macro recording, workbenches, ability
+ to run as a server and dynamically loadable application extensions and
+ it is designed to be platform independent.
+ .
+ Currently, FreeCAD can import and display CAD models in IGES, STEP, and
+ BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats.
+ Editing and modeling features are currently somewhat limited.
+ .
+ This package contains shared library files for FreeCAD built against Python 3.
--- /dev/null
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: FreeCAD
+Upstream-Contact: Werner Mayer <wmayer@users.sourceforge.net>
+Source: https://github.com/freecad/freecad
+Files-Excluded:
+ data/examples
+ data/tests/*.fcstd
+ src/Doc/freecad.qch.part*
+ src/Doc/freecad.qhc
+ src/MacAppBundle
+ src/Tools/_TEMPLATE_
+ src/3rdParty/libkdtree
+
+Files: *
+Copyright: 2001-2016 Jürgen Riegel <juergen.riegel@web.de>,
+ Werner Mayer <wmayer@users.sourceforge.net>
+License: LGPL-2+
+
+Files: src/3rdParty/salomesmesh/*
+Copyright: 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, CEDRAT,
+ EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+ 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
+License: LGPL-2.1
+
+Files: src/3rdParty/salomesmesh/src/MEFISTO2/*
+Copyright: 2006 Laboratoire J.-L. Lions UPMC Paris
+License: LGPL-2.1
+
+Files: src/Base/Base64.*
+Copyright: 2004-2008 Rene Nyffenegger <rene.nyffenegger@adp-gmbh.ch>
+License: other
+ This source code is provided 'as-is', without any express or implied
+ warranty. In no event will the author be held liable for any damages
+ arising from the use of this software.
+ .
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+ .
+ 1. The origin of this source code must not be misrepresented; you must not
+ claim that you wrote the original source code. If you use this source code
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ .
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original source code.
+ .
+ 3. This notice may not be removed or altered from any source distribution.
+
+Files: src/Base/fdstream.hpp
+Copyright: 2001 Nicolai M. Josuttis
+License: other-josuttis
+ Permission to copy, use, modify, sell and distribute this software
+ is granted provided this copyright notice appears in all copies.
+ This software is provided "as is" without express or implied
+ warranty, and with no claim as to its suitability for any purpose.
+
+Files: src/Base/gzstream.*
+Copyright: 2001 Deepak Bandyopadhyay, Lutz Kettner
+License: LGPL-2.1
+
+Files: src/Base/PyTools.*
+Copyright: 1996-2000 Mark Lutz, and O'Reilly and Associates.
+License: other-lutz
+ Permission to use, copy, modify, and distribute this software
+ for any purpose and without fee is hereby granted. This software
+ is provided on an as is basis, without warranties of any kind.
+
+Files: src/Base/BoundBox.h src/Base/Swap.* src/Base/Vector3D.* src/Base/ViewProj.h src/Base/Matrix.* src/Base/Tools2D.* src/Mod/Mesh/App/Core/*
+Copyright: 2005 Imetric 3D GmbH
+License: GPL-2+
+ On Debian systems, the complete text of the GNU General Public
+ License version 2 can be found in `/usr/share/common-licenses/GPL-2'.
+
+Files: src/Gui/iisTaskPanel/src/*
+Copyright: http://www.ii-system.com
+License: LGPL-2.1
+
+Files: src/Mod/Draft/importAirfoilDAT.py
+Copyright: 2010 Heiko Jakob <heiko.jakob@gediegos.de>
+License: LGPL-2+
+
+Files: src/Mod/Mesh/App/Core/Builder.h
+ src/Mod/Mesh/App/Core/SetOperations.*
+ src/Mod/Mesh/BuildRegularGeoms.py
+Copyright: 2005 Berthold Grupp
+License: LGPL-2+
+
+Files: src/Mod/Image/App/ImageBase.* src/Mod/Image/Gui/GLImageBox.* src/Mod/Image/Gui/ImageView.* src/Mod/Image/Gui/XpmImages.h
+Copyright: 2004 Imetric 3D GmbH
+License: LGPL-2+
+
+Files: src/Mod/Mesh/App/Core/tritritest.h
+Copyright: 1997 Tomas Moller <tam@cs.lth.se>
+License: other-moller
+ tritritest.h has no licensing information, but Tomas Moller replied
+ the following, when asked about it:
+ .
+ The code is free to use for anyone and any projects, but I give no
+ warranties.
+
+Files: src/Mod/Mesh/App/WildMagic4/*
+Copyright: 1998-2007 David Eberly http://www.geometrictools.com
+License: LGPL-2.1+
+
+Files: src/Mod/Part/App/edgecluster.*
+Copyright: 2010 Joachim Zettler <Joachim.Zettler@gmx.de>
+License: LGPL-2+
+
+Files: src/Mod/Raytracing/App/resources/*
+Copyright: 2005 Georg Wiora <georg.wiora@quarkbox.de>,
+ Juergen Riegel <juergen.riegel@web.de>
+License: LGPL-2+
+
+Files: src/Mod/Test/unittestgui.py
+Copyright: 1999-2001 Steve Purcell
+License: PSF
+ This module is free software, and you may redistribute it and/or modify
+ it under the same terms as Python itself, so long as this copyright message
+ and disclaimer are retained in their original form.
+ .
+ IN NO EVENT SHALL THE AUTHOR BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
+ SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
+ THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+ DAMAGE.
+ .
+ THE AUTHOR SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS,
+ AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE,
+ SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+
+Files: src/Tools/generateBase/generateDS.py
+Copyright: 2003 Dave Kuhlman
+License: Expat
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+ .
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+ .
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Files: src/Base/QuantityParser.c src/Gui/SelectionFilter.tab.c
+Copyright: 1984, 1989-1990, 2000-2006, 2009-2010 Free Software Foundation, Inc.
+License: GPL-3+ with Bison exception
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+ .
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+ .
+ As a special exception, you may create a larger work that contains
+ part or all of the Bison parser skeleton and distribute that work
+ under terms of your choice, so long as that work isn't itself a
+ parser generator using the skeleton or a modified version thereof
+ as a parser skeleton. Alternatively, if you modify or redistribute
+ the parser skeleton itself, you may (at your option) remove this
+ special exception, which will cause the skeleton and the resulting
+ Bison output files to be licensed under the GNU General Public
+ License without this special exception.
+ .
+ This special exception was added by the Free Software Foundation in
+ version 2.2 of Bison.
+ .
+ C LALR(1) parser skeleton written by Richard Stallman, by
+ simplifying the original so-called "semantic" parser.
+ .
+ All symbols defined below should begin with yy or YY, to avoid
+ infringing on user name space. This should be done even for local
+ variables, as they might otherwise be expanded by user macros.
+ There are some unavoidable exceptions within include files to
+ define necessary library symbols; they are noted "INFRINGES ON
+ USER NAME SPACE" below.
+
+Files: src/CXX/*
+Copyright: (c) 1998 - 2007 The Regents of the University of California
+License: BSD-3-with-notice
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ .
+ - Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the disclaimer below.
+ - Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the disclaimer (as noted below) in the
+ documentation and/or materials provided with the distribution.
+ - Neither the name of the UC/LLNL nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+ .
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OF THE UNIVERSITY OF CALIFORNIA,
+ THE U.S. DEPARTMENT OF ENERGY OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
+ OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ .
+ Additional BSD Notice
+ .
+ 1. This notice is required to be provided under our contract with the U.S.
+ Department of Energy (DOE). This work was produced at the University of
+ California, Lawrence Livermore National Laboratory under Contract No.
+ W-7405-ENG-48 with the DOE.
+ .
+ 2. Neither the United States Government nor the University of California
+ nor any of their employees, makes any warranty, express or implied, or
+ assumes any liability or responsibility for the accuracy, completeness,
+ or usefulness of any information, apparatus, product, or process disclosed,
+ or represents that its use would not infringe privately-owned rights.
+ .
+ 3. Also, reference herein to any specific commercial products, process, or
+ services by trade name, trademark, manufacturer or otherwise does not
+ necessarily constitute or imply its endorsement, recommendation, or
+ favoring by the United States Government or the University of California.
+ The views and opinions of authors expressed herein do not necessarily
+ state or reflect those of the United States Government or the University
+ of California, and shall not be used for advertising or product endorsement
+ purposes.
+
+Files: src/Gui/QSint/*
+Copyright: (c) QSint developers
+License: LGPL-3
+ On Debian systems, the complete text of the GNU Lesser General Public
+ License version 3 can be found in `/usr/share/common-licenses/LGPL-3'.
+
+License: LGPL-2.1+
+ On Debian systems, the complete text of the GNU Lesser General Public
+ License version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1'.
+
+License: LGPL-2.1
+ On Debian systems, the complete text of the GNU Lesser General Public
+ License version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1'.
+
+License: LGPL-2+
+ On Debian systems, the complete text of the GNU Lesser General Public
+ License version 2 can be found in `/usr/share/common-licenses/LGPL-2'.
--- /dev/null
+#!/usr/bin/dh-exec
+usr/share/doc/freecad-doc/ThirdPartyLibraries.html usr/share/freecad
+usr/share/freecad/Mod/*
+usr/share/freecad/Gui/*
+usr/share/freecad/Ext/*
+usr/share/freecad/share/icons/* usr/share/icons
+usr/share/freecad/share/thumbnailers/* usr/share/thumbnailers
+usr/share/freecad/3Dconnexion/*
--- /dev/null
+usr/share/freecad/ThirdPartyLibraries.html usr/share/doc/freecad-doc/ThirdPartyLibraries.html
+usr/share/freecad/Gui usr/lib/freecad/Gui
+usr/share/freecad/Mod usr/lib/freecad/Mod
+usr/share/freecad/Ext usr/lib/freecad/Ext
--- /dev/null
+# /usr/bin/freecad is a symlink, handled by update-alternatives, pointing at
+# /usr/lib/freecad/bin/freecad-python3
+desktop-command-not-in-package
--- /dev/null
+debian/freecad.1
--- /dev/null
+#!/usr/bin/dh-exec
+usr/share/freecad/bin/FreeCADCmd-Python3 => usr/lib/freecad/bin/freecadcmd-python3
+usr/share/freecad/bin/FreeCAD-Python3 => usr/lib/freecad/bin/freecad-python3
--- /dev/null
+#!/bin/sh
+
+set -e
+
+update-alternatives --install /usr/bin/freecad freecad /usr/lib/freecad/bin/freecad-python3 30 \
+ --slave /usr/bin/freecadcmd freecadcmd /usr/lib/freecad/bin/freecadcmd-python3 \
+ --slave /usr/lib/freecad/lib freecadlib /usr/lib/freecad-python3/lib
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+set -e
+
+case "$1" in
+ remove|deconfigure)
+ update-alternatives --remove freecad /usr/lib/freecad/bin/freecad-python3
+ ;;
+
+ upgrade|failed-upgrade)
+ ;;
+
+ *)
+ echo "prerm called with unknown argument '$1'" >&2
+ exit 0
+ ;;
+esac
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+.\" Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH FREECAD 1 "March 22, 2019" freecad "Linux User's Manual"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh disable hyphenation
+.\" .hy enable hyphenation
+.\" .ad l left justify
+.\" .ad b justify to both left and right margins
+.\" .nf disable filling
+.\" .fi enable filling
+.\" .br insert line break
+.\" .sp <n> insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+freecad \- Extensible Open Source CAx program
+.SH SYNOPSIS
+.B freecad
+.RI [ options ] " files"
+.br
+.B freecadcmd
+.RI [ options ] " files"
+.SH DESCRIPTION
+.B FreeCAD
+is an Open Source CAx RAD based on OpenCasCade, Qt and Python. It features
+some key concepts like macro recording, workbenches, ability to run as a
+server and dynamically loadable application extensions and it is designed
+to be platform independent.
+.\" TeX users may be more comfortable with the \fB<whatever>\fP and
+.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
+.\" respectively.
+.SH USAGE
+\fBfreecad\fR starts with a GUI while \fBfreecadcmd\fR is only a pure command line version that starts a Python interpreter.
+.SH OPTIONS
+These programs follow the usual GNU command line syntax, with long
+options starting with two dashes (`-').
+A summary of the options supported by \fBfreecad\fR is included below.
+.SS "Generic options"
+.TP
+\fB\-c, \-\-console\fR
+Starts in console mode.
+.TP
+\fB\-\-dump\-config\fR
+Dumps configuration.
+.TP
+\fB\-\-get\-config\fR \fIarg\fR
+Prints the value of the requested configuration key.
+.TP
+\fB\-h, \-\-help\fR
+Prints help message.
+.TP
+\fB\-\-response\-file\fR \fIarg\fR
+Can be specified with '@name', too.
+.TP
+\fB\-v, \-\-version\fR
+Prints version string.
+
+.SS "Configuration"
+.TP
+\fB\-l, \-\-write\-log\fR
+Writes a log file to $HOME/.FreeCAD/FreeCAD.log
+.TP
+\fB\-\-log\-file\fR \fIarg\fR
+Unlike --write-log this allows logging to an arbitrary file.
+.TP
+\fB\-M, \-\-module\-path\fR \fIarg\fR
+Additional module paths.
+.TP
+\fB\-P, \-\-python\-path\fR \fIarg\fR
+Additional Python paths.
+.TP
+\fB\-s, \-\-system\-cfg\fR \fIarg\fR
+System config file to load/save system settings.
+.TP
+\fB\-\-single\-instance\fR
+Allow to run a single instance of the application.
+.TP
+\fB\-t, \-\-run\-test\fR \fIarg\fR
+Test case - or 0 for all.
+.TP
+\fB\-u, \-\-user\-cfg\fR \fIarg\fR
+User config file to load/save user settings.
+.SH SEE ALSO
+To get more information about \fBFreeCAD\fR, please visit \fIhttps://freecadweb.org\fR
+.SH BUGS
+To report a bug, please visit \fIhttps://freecadweb.org/tracker\fR
+.SH AUTHOR
+This manual page was written by Werner Mayer and Salman Mohammadi <salman@smoha.org>.
--- /dev/null
+src/Mod/Ship/resources/examples/*
--- /dev/null
+usr/share/freecad/share/applications/* usr/share/applications
+usr/share/freecad/share/metainfo/* usr/share/metainfo
+usr/share/freecad/share/mime/* usr/share/mime
--- /dev/null
+# FreeCAD is transitioning to a virtual package
+package-relation-with-self
--- /dev/null
+[DEFAULT]
+pristine-tar = True
+sign-tags = true
--- /dev/null
+usr/lib/freecad-python3/lib/*.so
--- /dev/null
+# False positive for pcre3
+embedded-library
--- /dev/null
+usr/share/freecad/share/pixmaps/freecad.xpm
--- /dev/null
+Description: Add several supported MIME types to deskto file.
+Author: Tobias Frost <tobi@debian.org>
+Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=993089
+Forwarded: not yet
+Last-Update: 2022-09-11 <YYYY-MM-DD, last update of the meta-information, optional>
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/src/XDGData/org.freecadweb.FreeCAD.desktop
++++ b/src/XDGData/org.freecadweb.FreeCAD.desktop
+@@ -16,4 +16,4 @@
+ Icon=org.freecadweb.FreeCAD
+ Categories=Graphics;Science;Education;Engineering;
+ StartupNotify=true
+-MimeType=application/x-extension-fcstd;
++MimeType=application/x-extension-fcstd;model/obj;model/iges;image/vnd.dwg;image/vnd.dxf;model/vnd.collada+xml;application/iges;model/iges;model/step;model/step+zip;model/stl;application/vnd.shp;model/vrml;
--- /dev/null
+Bug-Debian: https://bugs.debian.org/623560
+Author: Anton Gladky <gladky.anton@gmail.com>
+Last-Update: 2011-09-24
+Description: Disable memory-check in SMDS because sysinfo.h is not working
+ on BSD-systems and causes FTBFS. It is better to disable it only on
+ BSD-platforms.
+ Or use http://code.google.com/p/sysinfo-bsd/source/browse/sysinfo.c
+ for them.
+--- a/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp
++++ b/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp
+@@ -61,13 +61,6 @@
+ #include <iterator>
+ using namespace std;
+
+-#ifndef WIN32
+-#if !(defined(__MACH__) && defined(__APPLE__))
+-#include <sys/sysinfo.h>
+-#endif
+-#include <sys/wait.h>
+-#endif
+-
+ // number of added entities to check memory after
+ #define CHECKMEMORY_INTERVAL 100000
+
+@@ -85,56 +78,7 @@
+
+ int SMDS_Mesh::CheckMemory(const bool doNotRaise)
+ {
+-#if 0
+-#if (defined(__MACH__) && defined(__APPLE__))
+- return 1000;
+-#else
+-#ifndef WIN32
+- struct sysinfo si;
+- int err = sysinfo( &si );
+- if ( err )
+- return -1;
+-
+- const unsigned long Mbyte = 1024 * 1024;
+-
+- static int limit = -1;
+- if ( limit < 0 ) {
+- int status = system("SMDS_MemoryLimit"); // it returns lower limit of free RAM
+- if (status >= 0 ) {
+- limit = WEXITSTATUS(status);
+- }
+- else {
+- double factor = ( si.totalswap == 0 ) ? 0.1 : 0.2;
+- limit = int(( factor * si.totalram * si.mem_unit ) / Mbyte );
+- }
+- if ( limit < 20 )
+- limit = 20;
+- else
+- limit = int ( limit * 1.5 );
+- MESSAGE ( "SMDS_Mesh::CheckMemory() memory limit = " << limit << " MB" );
+- }
+-
+- // compute separately to avoid overflow
+- int freeMb =
+- ( si.freeram * si.mem_unit ) / Mbyte +
+- ( si.freeswap * si.mem_unit ) / Mbyte;
+- //cout << "freeMb = " << freeMb << " limit = " << limit << endl;
+-
+- if ( freeMb > limit )
+- return freeMb - limit;
+-
+- if ( doNotRaise )
+- return 0;
+-
+- MESSAGE ("SMDS_Mesh::CheckMemory() throws as free memory too low: " << freeMb <<" MB" );
+- throw std::bad_alloc();
+-#else
+- return -1;
+-#endif
+-#endif
+-#else
+- return 1000;
+-#endif
++ return 1000;
+ }
+
+ ///////////////////////////////////////////////////////////////////////////////
--- /dev/null
+Description: Do not include binary examples excluded via d/copyright
+Author: Anton Gladky <gladk@debian.org>
+Last-Update: 2018-06-10
+
+--- a/data/CMakeLists.txt
++++ b/data/CMakeLists.txt
+@@ -1,9 +0,0 @@
+-add_subdirectory(examples)
+-
+-INSTALL(
+- FILES
+- License.txt
+- DESTINATION
+- ${CMAKE_INSTALL_DATADIR}
+-)
+-
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -85,7 +85,6 @@
+ SetGlobalCompilerAndLinkerSettings()
+
+ add_subdirectory(src)
+-add_subdirectory(data)
+
+ BuildAndInstallDesignerPlugin()
+
--- /dev/null
+Description: exclude ply from build-sources, use packaged version
+Author: Anton Gladky <gladk@debian.org>, Sebastian Hoogen <sebastian@hoogen.de>
+Last-Update: 2013-09-25
+
+--- a/src/Mod/OpenSCAD/CMakeLists.txt
++++ b/src/Mod/OpenSCAD/CMakeLists.txt
+@@ -88,12 +88,6 @@
+
+ INSTALL(
+ FILES
+- ${ply_SRCS}
+- DESTINATION
+- Mod/OpenSCAD/ply
+-)
+-INSTALL(
+- FILES
+ ${OpenSCAD_SRCS}
+ ${OpenSCAD_QRC_SRCS}
+ DESTINATION
--- /dev/null
+Description: Fix FTBFS on armhf/armel, undefined GL_PROJECTION
+ This define is defined in GL/gl.h, so there must be some missing include
+ somewhere. This patch just adds the include…
+Author: tobi@debian.org
+Bug-Debian: https://bugs.debian.org/1014875
+Forwarded: no
+Last-Update: 2022-08-08 <YYYY-MM-DD, last update of the meta-information, optional>
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/src/Gui/Quarter/QuarterWidget.cpp
++++ b/src/Gui/Quarter/QuarterWidget.cpp
+@@ -54,6 +54,11 @@
+
+ #include <cassert>
+
++#include "config.h"
++#ifdef HAVE_GL_GL_H
++#include <GL/gl.h>
++#endif
++
+ #include <QAction>
+ #include <QApplication>
+ #include <QDebug>
--- /dev/null
+Description: Disable failing FEM test case TestSolverCalculix
+ The upstream bug tracker suggests that this is a problem with the test, as it seems
+ floats for the input are very similiar, only differing by the LSB.
+ .
+ This patch disables the test.
+Author: Tobias Frost <tobi@debian.org>
+Bug: https://github.com/FreeCAD/FreeCAD/issues/7188
+Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1017598
+Forwarded: not-needed, Debian specific.
+Last-Update: 2022-08-18 <YYYY-MM-DD, last update of the meta-information, optional>
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+--- a/src/Mod/Fem/femtest/app/test_solver_calculix.py
++++ b/src/Mod/Fem/femtest/app/test_solver_calculix.py
+@@ -270,12 +270,13 @@
+ self.input_file_writing_test(get_namefromdef("test_"))
+
+ # ********************************************************************************************
+- def test_constraint_transform_torque(
+- self
+- ):
+- from femexamples.constraint_transform_torque import setup
+- setup(self.document, "calculix")
+- self.input_file_writing_test(get_namefromdef("test_"))
++ # disabled, #1017598
++ #def test_constraint_transform_torque(
++ # self
++ #):
++ # from femexamples.constraint_transform_torque import setup
++ # setup(self.document, "calculix")
++ # self.input_file_writing_test(get_namefromdef("test_"))
+
+ # ********************************************************************************************
+ def test_frequency_beamsimple(
--- /dev/null
+Description: Don't include extra license file in package
+Author: Kurt Kremitzki <kkremitzki@gmail.com>
+Last-Update: 2018-06-13
+
+--- a/src/Mod/Idf/CMakeLists.txt
++++ b/src/Mod/Idf/CMakeLists.txt
+@@ -6,7 +6,7 @@
+ SOURCE_GROUP("" FILES ${Idf_SRCS})
+
+ SET(IdfLibs_SRCS
+- Idflibs/License.txt
++ #Idflibs/License.txt
+ Idflibs/0603_SMD.stp
+ Idflibs/0805_SMD.stp
+ Idflibs/1206_SMD.stp
--- /dev/null
+Description: Fix builds for OpenCASCADE >= 7.5.2
+Author: Kurt Kremitzki <kkremitzki@debian.org>
+Last-Updated: 2021-09-06
+
+--- a/src/Mod/Part/App/ShapeUpgrade/UnifySameDomainPyImp.cpp
++++ b/src/Mod/Part/App/ShapeUpgrade/UnifySameDomainPyImp.cpp
+@@ -31,6 +31,9 @@
+ // Needed for OCCT 7.5.2
+ #include <TopoDS_Edge.hxx>
+
++// Needed for OpenCASCADE >= 7.5.2
++#include <TopoDS_Edge.hxx>
++
+ #include "ShapeUpgrade/UnifySameDomainPy.h"
+ #include "ShapeUpgrade/UnifySameDomainPy.cpp"
+ #include "TopoShapePy.h"
--- /dev/null
+Description: Skip open_de9b3fb438 s390x to avoid OOM
+ The load of the current file in test_open_head is fine, but
+ open_de9b3fb438 goes into an OOM even in huge (e.g. 10GB) systemd.
+ This probably needs a proper fix by upstream in regard to the migration
+ modules that load the old code, but until then (since the rest works on s390x)
+ this unblocks the package self-test in Debian & Ubuntu.
+Forwarded: no
+X-Not-Forwarded-Reason: Unclear where/how exactly
+Author: Christian Ehrhardt <christian.ehrhardt@canonical.com>
+Origin: <todo-URL-to-git or similar>
+Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/freecad/+bug/1918474
+Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=984952
+Last-Update: 2021-03-15
+
+--- a/src/Mod/Fem/femtest/app/test_open.py
++++ b/src/Mod/Fem/femtest/app/test_open.py
+@@ -25,6 +25,7 @@
+ __author__ = "Bernd Hahnebach"
+ __url__ = "https://www.freecadweb.org"
+
++import platform
+ import sys
+ import tempfile
+ import unittest
+@@ -133,6 +134,10 @@
+ if sys.version_info.major < 3:
+ return
+
++ # migration modules fail on s390x (big endian) and trigger OOMs (LP: #1918474)
++ if platform.machine() == "s390x":
++ return
++
+ # the number in method name is the FreeCAD commit the document was created with
+ # https://github.com/FreeCAD/FreeCAD/commit/de9b3fb438
+ # the document was created by running the object create unit test
--- /dev/null
+Description: fix compilation on Armel due to coincident variables in
+ sys/ucontext.h (R2, R3, R4). Thanks to Paul Brook <paul@codesourcery.com>
+ http://lists.alioth.debian.org/pipermail/debian-science-maintainers/2011-October/009876.html
+Author: Anton Gladky <gladky.anton@gmail.com>
+Last-Update: 2011-10-27
+
+--- a/src/3rdParty/salomesmesh/inc/Rn.h
++++ b/src/3rdParty/salomesmesh/inc/Rn.h
+@@ -31,7 +31,7 @@
+ #include <gp_Dir.hxx> //Dans OpenCascade
+
+ //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+-// BUT: Definir les espaces affines R R2 R3 R4 soit Rn pour n=1,2,3,4
++// BUT: Definir les espaces affines R R_2 R_3 R_4 soit Rn pour n=1,2,3,4
+ //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ // AUTEUR : Frederic HECHT ANALYSE NUMERIQUE UPMC PARIS OCTOBRE 2000
+ // MODIFS : Alain PERRONNET ANALYSE NUMERIQUE UPMC PARIS NOVEMBRE 2000
+@@ -82,155 +82,155 @@
+ //==============
+ //typedef struct { short int x,y } XPoint; //en fait ce type est defini dans X11-Window
+ // #include <X11/Xlib.h>
+-//la classe R2
++//la classe R_2
+ //============
+-class R2
++class R_2
+ {
+- friend std::ostream& operator << (std::ostream& f, const R2 & P)
++ friend std::ostream& operator << (std::ostream& f, const R_2 & P)
+ { f << P.x << ' ' << P.y ; return f; }
+- friend std::istream& operator >> (std::istream& f, R2 & P)
++ friend std::istream& operator >> (std::istream& f, R_2 & P)
+ { f >> P.x >> P.y ; return f; }
+
+- friend std::ostream& operator << (std::ostream& f, const R2 * P)
++ friend std::ostream& operator << (std::ostream& f, const R_2 * P)
+ { f << P->x << ' ' << P->y ; return f; }
+- friend std::istream& operator >> (std::istream& f, R2 * P)
++ friend std::istream& operator >> (std::istream& f, R_2 * P)
+ { f >> P->x >> P->y ; return f; }
+
+ public:
+ R x,y; //les donnees
+
+- R2 () :x(0),y(0) {} //les constructeurs
+- R2 (R a,R b) :x(a),y(b) {}
+- R2 (R2 A,R2 B) :x(B.x-A.x),y(B.y-A.y) {} //vecteur defini par 2 points
+-
+- R2 operator+(R2 P) const {return R2(x+P.x,y+P.y);} // Q+P possible
+- R2 operator+=(R2 P) {x += P.x;y += P.y; return *this;}// Q+=P;
+- R2 operator-(R2 P) const {return R2(x-P.x,y-P.y);} // Q-P
+- R2 operator-=(R2 P) {x -= P.x;y -= P.y; return *this;} // Q-=P;
+- R2 operator-()const {return R2(-x,-y);} // -Q
+- R2 operator+()const {return *this;} // +Q
+- R operator,(R2 P)const {return x*P.x+y*P.y;} // produit scalaire (Q,P)
+- R operator^(R2 P)const {return x*P.y-y*P.x;} // produit vectoriel Q^P
+- R2 operator*(R c)const {return R2(x*c,y*c);} // produit a droite P*c
+- R2 operator*=(R c) {x *= c; y *= c; return *this;}
+- R2 operator/(R c)const {return R2(x/c,y/c);} // division par un reel
+- R2 operator/=(R c) {x /= c; y /= c; return *this;}
++ R_2 () :x(0),y(0) {} //les constructeurs
++ R_2 (R a,R b) :x(a),y(b) {}
++ R_2 (R_2 A,R_2 B) :x(B.x-A.x),y(B.y-A.y) {} //vecteur defini par 2 points
++
++ R_2 operator+(R_2 P) const {return R_2(x+P.x,y+P.y);} // Q+P possible
++ R_2 operator+=(R_2 P) {x += P.x;y += P.y; return *this;}// Q+=P;
++ R_2 operator-(R_2 P) const {return R_2(x-P.x,y-P.y);} // Q-P
++ R_2 operator-=(R_2 P) {x -= P.x;y -= P.y; return *this;} // Q-=P;
++ R_2 operator-()const {return R_2(-x,-y);} // -Q
++ R_2 operator+()const {return *this;} // +Q
++ R operator,(R_2 P)const {return x*P.x+y*P.y;} // produit scalaire (Q,P)
++ R operator^(R_2 P)const {return x*P.y-y*P.x;} // produit vectoriel Q^P
++ R_2 operator*(R c)const {return R_2(x*c,y*c);} // produit a droite P*c
++ R_2 operator*=(R c) {x *= c; y *= c; return *this;}
++ R_2 operator/(R c)const {return R_2(x/c,y/c);} // division par un reel
++ R_2 operator/=(R c) {x /= c; y /= c; return *this;}
+ R & operator[](int i) {return (&x)[i];} // la coordonnee i
+- R2 orthogonal() {return R2(-y,x);} //le vecteur orthogonal dans R2
+- friend R2 operator*(R c,R2 P) {return P*c;} // produit a gauche c*P
++ R_2 orthogonal() {return R_2(-y,x);} //le vecteur orthogonal dans R_2
++ friend R_2 operator*(R c,R_2 P) {return P*c;} // produit a gauche c*P
+ };
+
+
+-//la classe R3
++//la classe R_3
+ //============
+-class R3
++class R_3
+ {
+- friend std::ostream& operator << (std::ostream& f, const R3 & P)
++ friend std::ostream& operator << (std::ostream& f, const R_3 & P)
+ { f << P.x << ' ' << P.y << ' ' << P.z ; return f; }
+- friend std::istream& operator >> (std::istream& f, R3 & P)
++ friend std::istream& operator >> (std::istream& f, R_3 & P)
+ { f >> P.x >> P.y >> P.z ; return f; }
+
+- friend std::ostream& operator << (std::ostream& f, const R3 * P)
++ friend std::ostream& operator << (std::ostream& f, const R_3 * P)
+ { f << P->x << ' ' << P->y << ' ' << P->z ; return f; }
+- friend std::istream& operator >> (std::istream& f, R3 * P)
++ friend std::istream& operator >> (std::istream& f, R_3 * P)
+ { f >> P->x >> P->y >> P->z ; return f; }
+
+ public:
+ R x,y,z; //les 3 coordonnees
+
+- R3 () :x(0),y(0),z(0) {} //les constructeurs
+- R3 (R a,R b,R c):x(a),y(b),z(c) {} //Point ou Vecteur (a,b,c)
+- R3 (R3 A,R3 B):x(B.x-A.x),y(B.y-A.y),z(B.z-A.z) {} //Vecteur AB
+-
+- R3 (gp_Pnt P) : x(P.X()), y(P.Y()), z(P.Z()) {} //Point d'OpenCascade
+- R3 (gp_Vec V) : x(V.X()), y(V.Y()), z(V.Z()) {} //Vecteur d'OpenCascade
+- R3 (gp_Dir P) : x(P.X()), y(P.Y()), z(P.Z()) {} //Direction d'OpenCascade
+-
+- R3 operator+(R3 P)const {return R3(x+P.x,y+P.y,z+P.z);}
+- R3 operator+=(R3 P) {x += P.x; y += P.y; z += P.z; return *this;}
+- R3 operator-(R3 P)const {return R3(x-P.x,y-P.y,z-P.z);}
+- R3 operator-=(R3 P) {x -= P.x; y -= P.y; z -= P.z; return *this;}
+- R3 operator-()const {return R3(-x,-y,-z);}
+- R3 operator+()const {return *this;}
+- R operator,(R3 P)const {return x*P.x+y*P.y+z*P.z;} // produit scalaire
+- R3 operator^(R3 P)const {return R3(y*P.z-z*P.y ,P.x*z-x*P.z, x*P.y-y*P.x);} // produit vectoriel
+- R3 operator*(R c)const {return R3(x*c,y*c,z*c);}
+- R3 operator*=(R c) {x *= c; y *= c; z *= c; return *this;}
+- R3 operator/(R c)const {return R3(x/c,y/c,z/c);}
+- R3 operator/=(R c) {x /= c; y /= c; z /= c; return *this;}
++ R_3 () :x(0),y(0),z(0) {} //les constructeurs
++ R_3 (R a,R b,R c):x(a),y(b),z(c) {} //Point ou Vecteur (a,b,c)
++ R_3 (R_3 A,R_3 B):x(B.x-A.x),y(B.y-A.y),z(B.z-A.z) {} //Vecteur AB
++
++ R_3 (gp_Pnt P) : x(P.X()), y(P.Y()), z(P.Z()) {} //Point d'OpenCascade
++ R_3 (gp_Vec V) : x(V.X()), y(V.Y()), z(V.Z()) {} //Vecteur d'OpenCascade
++ R_3 (gp_Dir P) : x(P.X()), y(P.Y()), z(P.Z()) {} //Direction d'OpenCascade
++
++ R_3 operator+(R_3 P)const {return R_3(x+P.x,y+P.y,z+P.z);}
++ R_3 operator+=(R_3 P) {x += P.x; y += P.y; z += P.z; return *this;}
++ R_3 operator-(R_3 P)const {return R_3(x-P.x,y-P.y,z-P.z);}
++ R_3 operator-=(R_3 P) {x -= P.x; y -= P.y; z -= P.z; return *this;}
++ R_3 operator-()const {return R_3(-x,-y,-z);}
++ R_3 operator+()const {return *this;}
++ R operator,(R_3 P)const {return x*P.x+y*P.y+z*P.z;} // produit scalaire
++ R_3 operator^(R_3 P)const {return R_3(y*P.z-z*P.y ,P.x*z-x*P.z, x*P.y-y*P.x);} // produit vectoriel
++ R_3 operator*(R c)const {return R_3(x*c,y*c,z*c);}
++ R_3 operator*=(R c) {x *= c; y *= c; z *= c; return *this;}
++ R_3 operator/(R c)const {return R_3(x/c,y/c,z/c);}
++ R_3 operator/=(R c) {x /= c; y /= c; z /= c; return *this;}
+ R & operator[](int i) {return (&x)[i];}
+- friend R3 operator*(R c,R3 P) {return P*c;}
++ friend R_3 operator*(R c,R_3 P) {return P*c;}
+
+- R3 operator=(gp_Pnt P) {return R3(P.X(),P.Y(),P.Z());}
+- R3 operator=(gp_Dir P) {return R3(P.X(),P.Y(),P.Z());}
++ R_3 operator=(gp_Pnt P) {return R_3(P.X(),P.Y(),P.Z());}
++ R_3 operator=(gp_Dir P) {return R_3(P.X(),P.Y(),P.Z());}
+
+- friend gp_Pnt gp_pnt(R3 xyz) { return gp_Pnt(xyz.x,xyz.y,xyz.z); }
++ friend gp_Pnt gp_pnt(R_3 xyz) { return gp_Pnt(xyz.x,xyz.y,xyz.z); }
+ //friend gp_Pnt operator=() { return gp_Pnt(x,y,z); }
+- friend gp_Dir gp_dir(R3 xyz) { return gp_Dir(xyz.x,xyz.y,xyz.z); }
++ friend gp_Dir gp_dir(R_3 xyz) { return gp_Dir(xyz.x,xyz.y,xyz.z); }
+
+- bool DansPave( R3 & xyzMin, R3 & xyzMax )
++ bool DansPave( R_3 & xyzMin, R_3 & xyzMax )
+ { return xyzMin.x<=x && x<=xyzMax.x &&
+ xyzMin.y<=y && y<=xyzMax.y &&
+ xyzMin.z<=z && z<=xyzMax.z; }
+ };
+
+-//la classe R4
++//la classe R_4
+ //============
+-class R4: public R3
++class R_4: public R_3
+ {
+- friend std::ostream& operator <<(std::ostream& f, const R4 & P )
++ friend std::ostream& operator <<(std::ostream& f, const R_4 & P )
+ { f << P.x << ' ' << P.y << ' ' << P.z << ' ' << P.omega; return f; }
+- friend std::istream& operator >>(std::istream& f, R4 & P)
++ friend std::istream& operator >>(std::istream& f, R_4 & P)
+ { f >> P.x >> P.y >> P.z >> P.omega ; return f; }
+
+- friend std::ostream& operator <<(std::ostream& f, const R4 * P )
++ friend std::ostream& operator <<(std::ostream& f, const R_4 * P )
+ { f << P->x << ' ' << P->y << ' ' << P->z << ' ' << P->omega; return f; }
+- friend std::istream& operator >>(std::istream& f, R4 * P)
++ friend std::istream& operator >>(std::istream& f, R_4 * P)
+ { f >> P->x >> P->y >> P->z >> P->omega ; return f; }
+
+ public:
+ R omega; //la donnee du poids supplementaire
+
+- R4 () :omega(1.0) {} //les constructeurs
+- R4 (R a,R b,R c,R d):R3(a,b,c),omega(d) {}
+- R4 (R4 A,R4 B) :R3(B.x-A.x,B.y-A.y,B.z-A.z),omega(B.omega-A.omega) {}
+-
+- R4 operator+(R4 P)const {return R4(x+P.x,y+P.y,z+P.z,omega+P.omega);}
+- R4 operator+=(R4 P) {x += P.x;y += P.y;z += P.z;omega += P.omega;return *this;}
+- R4 operator-(R4 P)const {return R4(x-P.x,y-P.y,z-P.z,omega-P.omega);}
+- R4 operator-=(R4 P) {x -= P.x;y -= P.y;z -= P.z;omega -= P.omega;return *this;}
+- R4 operator-()const {return R4(-x,-y,-z,-omega);}
+- R4 operator+()const {return *this;}
+- R operator,(R4 P)const {return x*P.x+y*P.y+z*P.z+omega*P.omega;} // produit scalaire
+- R4 operator*(R c)const {return R4(x*c,y*c,z*c,omega*c);}
+- R4 operator*=(R c) {x *= c; y *= c; z *= c; omega *= c; return *this;}
+- R4 operator/(R c)const {return R4(x/c,y/c,z/c,omega/c);}
+- R4 operator/=(R c) {x /= c; y /= c; z /= c; omega /= c; return *this;}
++ R_4 () :omega(1.0) {} //les constructeurs
++ R_4 (R a,R b,R c,R d):R_3(a,b,c),omega(d) {}
++ R_4 (R_4 A,R_4 B) :R_3(B.x-A.x,B.y-A.y,B.z-A.z),omega(B.omega-A.omega) {}
++
++ R_4 operator+(R_4 P)const {return R_4(x+P.x,y+P.y,z+P.z,omega+P.omega);}
++ R_4 operator+=(R_4 P) {x += P.x;y += P.y;z += P.z;omega += P.omega;return *this;}
++ R_4 operator-(R_4 P)const {return R_4(x-P.x,y-P.y,z-P.z,omega-P.omega);}
++ R_4 operator-=(R_4 P) {x -= P.x;y -= P.y;z -= P.z;omega -= P.omega;return *this;}
++ R_4 operator-()const {return R_4(-x,-y,-z,-omega);}
++ R_4 operator+()const {return *this;}
++ R operator,(R_4 P)const {return x*P.x+y*P.y+z*P.z+omega*P.omega;} // produit scalaire
++ R_4 operator*(R c)const {return R_4(x*c,y*c,z*c,omega*c);}
++ R_4 operator*=(R c) {x *= c; y *= c; z *= c; omega *= c; return *this;}
++ R_4 operator/(R c)const {return R_4(x/c,y/c,z/c,omega/c);}
++ R_4 operator/=(R c) {x /= c; y /= c; z /= c; omega /= c; return *this;}
+ R & operator[](int i) {return (&x)[i];}
+- friend R4 operator*(R c,R4 P) {return P*c;}
++ friend R_4 operator*(R c,R_4 P) {return P*c;}
+ };
+
+ //quelques fonctions supplementaires sur ces classes
+ //==================================================
+-inline R Aire2d(const R2 A,const R2 B,const R2 C){return (B-A)^(C-A);}
+-inline R Angle2d(R2 P){ return atan2(P.y,P.x);}
++inline R Aire2d(const R_2 A,const R_2 B,const R_2 C){return (B-A)^(C-A);}
++inline R Angle2d(R_2 P){ return atan2(P.y,P.x);}
+
+-inline R Norme2_2(const R2 & A){ return (A,A);}
+-inline R Norme2(const R2 & A){ return sqrt((A,A));}
+-inline R NormeInfinie(const R2 & A){return Max(Abs(A.x),Abs(A.y));}
+-
+-inline R Norme2_2(const R3 & A){ return (A,A);}
+-inline R Norme2(const R3 & A){ return sqrt((A,A));}
+-inline R NormeInfinie(const R3 & A){return Max(Abs(A.x),Abs(A.y),Abs(A.z));}
+-
+-inline R Norme2_2(const R4 & A){ return (A,A);}
+-inline R Norme2(const R4 & A){ return sqrt((A,A));}
+-inline R NormeInfinie(const R4 & A){return Max(Abs(A.x),Abs(A.y),Abs(A.z),Abs(A.omega));}
+-
+-inline R2 XY(R3 P) {return R2(P.x, P.y);} //restriction a R2 d'un R3 par perte de z
+-inline R3 Min(R3 P, R3 Q)
+-{return R3(P.x<Q.x ? P.x : Q.x, P.y<Q.y ? P.y : Q.y, P.z<Q.z ? P.z : Q.z);} //Pt de xyz Min
+-inline R3 Max(R3 P, R3 Q)
+-{return R3(P.x>Q.x ? P.x : Q.x, P.y>Q.y ? P.y : Q.y, P.z>Q.z ? P.z : Q.z);} //Pt de xyz Max
++inline R Norme2_2(const R_2 & A){ return (A,A);}
++inline R Norme2(const R_2 & A){ return sqrt((A,A));}
++inline R NormeInfinie(const R_2 & A){return Max(Abs(A.x),Abs(A.y));}
++
++inline R Norme2_2(const R_3 & A){ return (A,A);}
++inline R Norme2(const R_3 & A){ return sqrt((A,A));}
++inline R NormeInfinie(const R_3 & A){return Max(Abs(A.x),Abs(A.y),Abs(A.z));}
++
++inline R Norme2_2(const R_4 & A){ return (A,A);}
++inline R Norme2(const R_4 & A){ return sqrt((A,A));}
++inline R NormeInfinie(const R_4 & A){return Max(Abs(A.x),Abs(A.y),Abs(A.z),Abs(A.omega));}
++
++inline R_2 XY(R_3 P) {return R_2(P.x, P.y);} //restriction a R_2 d'un R_3 par perte de z
++inline R_3 Min(R_3 P, R_3 Q)
++{return R_3(P.x<Q.x ? P.x : Q.x, P.y<Q.y ? P.y : Q.y, P.z<Q.z ? P.z : Q.z);} //Pt de xyz Min
++inline R_3 Max(R_3 P, R_3 Q)
++{return R_3(P.x>Q.x ? P.x : Q.x, P.y>Q.y ? P.y : Q.y, P.z>Q.z ? P.z : Q.z);} //Pt de xyz Max
+
+ #endif
+--- a/src/3rdParty/salomesmesh/inc/StdMeshers_MEFISTO_2D.hxx
++++ b/src/3rdParty/salomesmesh/inc/StdMeshers_MEFISTO_2D.hxx
+@@ -64,7 +64,7 @@
+ typedef std::vector< StdMeshers_FaceSidePtr > TWireVector;
+
+ bool LoadPoints(TWireVector & wires,
+- R2* uvslf,
++ R_2* uvslf,
+ std::vector< const SMDS_MeshNode*>& mefistoToDS,
+ double scalex, double scaley);
+
+@@ -73,7 +73,7 @@
+ double& scalex,
+ double& scaley);
+
+- void StoreResult (Z nbst, R2* uvst, Z nbt, Z* nust,
++ void StoreResult (Z nbst, R_2* uvst, Z nbt, Z* nust,
+ std::vector< const SMDS_MeshNode*>& mefistoToDS,
+ double scalex, double scaley);
+
+--- a/src/3rdParty/salomesmesh/inc/aptrte.h
++++ b/src/3rdParty/salomesmesh/inc/aptrte.h
+@@ -60,9 +60,9 @@
+
+ MEFISTO2D_EXPORT
+ void aptrte( Z nutysu, R aretmx,
+- Z nblf, Z *nudslf, R2 *uvslf,
+- Z nbpti, R2 *uvpti,
+- Z & nbst, R2 * & uvst, Z & nbt, Z * & nust,
++ Z nblf, Z *nudslf, R_2 *uvslf,
++ Z nbpti, R_2 *uvpti,
++ Z & nbst, R_2 * & uvst, Z & nbt, Z * & nust,
+ Z & ierr );
+ //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ // but : appel de la triangulation par un arbre-4 recouvrant
+@@ -123,7 +123,7 @@
+ #define tesuex TESUEX
+ #define teamqt TEAMQT
+ #define nusotr NUSOTR
+- #define qutr2d QUTR2D
++ #define qutr2d QUTR_2D
+ #define surtd2 SURTD2
+ #define qualitetrte QUALITETRTE
+
+@@ -160,7 +160,7 @@
+ __stdcall
+ #endif
+ #endif
+- qualitetrte( R3 *mnpxyd,
++ qualitetrte( R_3 *mnpxyd,
+ Z & mosoar, Z & mxsoar, Z *mnsoar,
+ Z & moartr, Z & mxartr, Z *mnartr,
+ Z & nbtria, R & quamoy, R & quamin ); }
+@@ -301,7 +301,7 @@
+ __stdcall
+ #endif
+ #endif
+- teajte( Z & mxsomm, Z & nbsomm, R3 * mnpxyd, R3 * comxmi,
++ teajte( Z & mxsomm, Z & nbsomm, R_3 * mnpxyd, R_3 * comxmi,
+ R & aretmx, Z & mxtree, Z * letree,
+ Z & ierr );
+ }
+@@ -313,8 +313,8 @@
+ __stdcall
+ #endif
+ #endif
+- tehote( Z & nutysu, Z & nbarpi, Z & mxsomm, Z & nbsomm, R3 * mnpxyd,
+- R3 * comxmi, R & aretmx,
++ tehote( Z & nutysu, Z & nbarpi, Z & mxsomm, Z & nbsomm, R_3 * mnpxyd,
++ R_3 * comxmi, R & aretmx,
+ Z * letree, Z & mxqueu, Z * mnqueu,
+ Z & ierr );
+ }
+@@ -328,7 +328,7 @@
+ __stdcall
+ #endif
+ #endif
+- tetrte( R3 * comxmi, R & aretmx, Z & nbarpi, Z & mxsomm, R3 * mnpxyd,
++ tetrte( R_3 * comxmi, R & aretmx, Z & nbarpi, Z & mxsomm, R_3 * mnpxyd,
+ Z & mxqueu, Z * mnqueu, Z * mntree,
+ Z & mosoar, Z & mxsoar, Z & n1soar, Z * mnsoar,
+ Z & moartr, Z & mxartr, Z & n1artr, Z * mnartr, Z * mnarst,
+@@ -355,7 +355,7 @@
+ __stdcall
+ #endif
+ #endif
+- tedela( R3 * mnpxyd, Z * mnarst,
++ tedela( R_3 * mnpxyd, Z * mnarst,
+ Z & mosoar, Z & mxsoar, Z & n1soar, Z * mnsoar, Z & na,
+ Z & moartr, Z & mxartr, Z & n1artr, Z * mnartr, Z & n );
+ }
+@@ -369,7 +369,7 @@
+ __stdcall
+ #endif
+ #endif
+- terefr( Z & nbarpi, R3 * mnpxyd,
++ terefr( Z & nbarpi, R_3 * mnpxyd,
+ Z & mosoar, Z & mxsoar, Z & n1soar, Z * mnsoar,
+ Z & moartr, Z & mxartr, Z & n1artr, Z * mnartr, Z * mnarst,
+ Z & mxarcf, Z * mnarc1, Z * mnarc2,
+@@ -387,7 +387,7 @@
+ #endif
+ #endif
+ tesuex( Z & nblf, Z * nulftr,
+- Z & ndtri0, Z & nbsomm, R3 * mnpxyd, Z * mnslig,
++ Z & ndtri0, Z & nbsomm, R_3 * mnpxyd, Z * mnslig,
+ Z & mosoar, Z & mxsoar, Z * mnsoar,
+ Z & moartr, Z & mxartr, Z & n1artr, Z * mnartr, Z * mnarst,
+ Z & nbtria, Z * mntrsu, Z & ierr );
+@@ -407,7 +407,7 @@
+ Z & mxarcf, Z * mntrcf, Z * mnstbo,
+ Z * n1arcf, Z * mnarcf, Z * mnarc1,
+ Z & nbarpi, Z & nbsomm, Z & mxsomm,
+- R3 * mnpxyd, Z * mnslig,
++ R_3 * mnpxyd, Z * mnslig,
+ Z & ierr );
+ }
+ // amelioration de la qualite de la triangulation par
+@@ -434,7 +434,7 @@
+ __stdcall
+ #endif
+ #endif
+- qutr2d( R3 & p1, R3 & p2, R3 & p3, R & qualite );
++ qutr2d( R_3 & p1, R_3 & p2, R_3 & p3, R & qualite );
+ }
+ //calculer la qualite d'un triangle de R2 de sommets p1, p2, p3
+
+@@ -445,7 +445,7 @@
+ __stdcall
+ #endif
+ #endif
+- surtd2( R3 & p1, R3 & p2, R3 & p3 );
++ surtd2( R_3 & p1, R_3 & p2, R_3 & p3 );
+ }
+ //calcul de la surface d'un triangle defini par 3 points de r**2
+
+--- a/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp
++++ b/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp
+@@ -88,9 +88,9 @@
+
+
+ void aptrte( Z nutysu, R aretmx,
+- Z nblf, Z * nudslf, R2 * uvslf,
+- Z nbpti, R2 * uvpti,
+- Z & nbst, R2 * & uvst,
++ Z nblf, Z * nudslf, R_2 * uvslf,
++ Z nbpti, R_2 * uvpti,
++ Z & nbst, R_2 * & uvst,
+ Z & nbt, Z * & nust,
+ Z & ierr )
+ //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+@@ -142,11 +142,11 @@
+ //no st1, st2, st3, 0 (non quadrangle)
+
+ R d, tcpu=0;
+-// R3 direction=R3(0,0,0); //direction pour areteideale() inactive ici!
++// R_3 direction=R_3(0,0,0); //direction pour areteideale() inactive ici!
+ Z nbarfr=nudslf[nblf]; //nombre total d'aretes des lignes fermees
+ Z mxtrou = Max( 1024, nblf ); //nombre maximal de trous dans la surface
+
+- R3 *mnpxyd=NULL;
++ R_3 *mnpxyd=NULL;
+ Z *mnsoar=NULL, mosoar=7, mxsoar, n1soar; //le hachage des aretes
+ Z *mnartr=NULL, moartr=3, mxartr, n1artr; //le no des 3 aretes des triangles
+ Z *mntree=NULL, motree=9, mxtree; //L'arbre 4 de TE et nombre d'entiers par TE
+@@ -161,7 +161,7 @@
+ Z *mnarst=NULL;
+ Z *mnlftr=NULL;
+
+- R3 comxmi[2]; //coordonnees UV Min et Maximales
++ R_3 comxmi[2]; //coordonnees UV Min et Maximales
+ R aremin, aremax; //longueur minimale et maximale des aretes
+ R airemx; //aire maximale souhaitee d'un triangle
+ R quamoy, quamin;
+@@ -191,7 +191,7 @@
+ NEWDEPART:
+ //mnpxyd( 3, mxsomm ) les coordonnees UV des sommets et la taille d'arete aux sommets
+ if( mnpxyd!=NULL ) delete [] mnpxyd;
+- mnpxyd = new R3[mxsomm];
++ mnpxyd = new R_3[mxsomm];
+ if( mnpxyd==NULL ) goto ERREUR;
+
+ // le tableau mnsoar des aretes des triangles
+@@ -655,7 +655,7 @@
+ // generation du tableau uvst de la surface triangulee
+ // ---------------------------------------------------
+ if( uvst != NULL ) delete [] uvst;
+- uvst = new R2[nbst];
++ uvst = new R_2[nbst];
+ if( uvst == NULL ) goto ERREUR;
+
+ nbst=-1;
+@@ -761,7 +761,7 @@
+ __stdcall
+ #endif
+ #endif
+- qualitetrte( R3 *mnpxyd,
++ qualitetrte( R_3 *mnpxyd,
+ Z & mosoar, Z & mxsoar, Z *mnsoar,
+ Z & moartr, Z & mxartr, Z *mnartr,
+ Z & nbtria, R & quamoy, R & quamin )
+--- a/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_MEFISTO_2D.cpp
++++ b/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_MEFISTO_2D.cpp
+@@ -234,12 +234,12 @@
+
+ Z nblf; //nombre de lignes fermees (enveloppe en tete)
+ Z *nudslf = NULL; //numero du dernier sommet de chaque ligne fermee
+- R2 *uvslf = NULL;
++ R_2 *uvslf = NULL;
+ Z nbpti = 0; //nombre points internes futurs sommets de la triangulation
+- R2 *uvpti = NULL;
++ R_2 *uvpti = NULL;
+
+ Z nbst;
+- R2 *uvst = NULL;
++ R_2 *uvst = NULL;
+ Z nbt;
+ Z *nust = NULL;
+ Z ierr = 0;
+@@ -264,7 +264,7 @@
+ nudslf[iw++] = nbpnt;
+ }
+
+- uvslf = new R2[nudslf[nblf]];
++ uvslf = new R_2[nudslf[nblf]];
+
+ double scalex, scaley;
+ ComputeScaleOnFace(aMesh, F, scalex, scaley);
+@@ -390,7 +390,7 @@
+ //purpose : prevent failure due to overlapped adjacent links
+ //=======================================================================
+
+-static bool fixOverlappedLinkUV( R2& uv0, const R2& uv1, const R2& uv2 )
++static bool fixOverlappedLinkUV( R_2& uv0, const R_2& uv1, const R_2& uv2 )
+ {
+ gp_XY v1( uv0.x - uv1.x, uv0.y - uv1.y );
+ gp_XY v2( uv2.x - uv1.x, uv2.y - uv1.y );
+@@ -441,7 +441,7 @@
+ //purpose :
+ //=======================================================================
+
+-static bool fixCommonVertexUV (R2 & theUV,
++static bool fixCommonVertexUV (R_2 & theUV,
+ const TopoDS_Vertex& theV,
+ const TopoDS_Face& theF,
+ const TopTools_IndexedDataMapOfShapeListOfShape & theVWMap,
+@@ -540,7 +540,7 @@
+ nextUV = uv;
+ }
+ }
+- R2 uv0, uv1, uv2;
++ R_2 uv0, uv1, uv2;
+ uv0.x = thisUV.X(); uv0.y = thisUV.Y();
+ uv1.x = nextUV.X(); uv1.y = nextUV.Y();
+ uv2.x = thisUV.X(); uv2.y = thisUV.Y();
+@@ -574,7 +574,7 @@
+ //=============================================================================
+
+ bool StdMeshers_MEFISTO_2D::LoadPoints(TWireVector & wires,
+- R2 * uvslf,
++ R_2 * uvslf,
+ vector<const SMDS_MeshNode*>& mefistoToDS,
+ double scalex,
+ double scaley)
+@@ -782,7 +782,7 @@
+ */
+ //=============================================================================
+
+-void StdMeshers_MEFISTO_2D::StoreResult(Z nbst, R2 * uvst, Z nbt, Z * nust,
++void StdMeshers_MEFISTO_2D::StoreResult(Z nbst, R_2 * uvst, Z nbt, Z * nust,
+ vector< const SMDS_MeshNode*>&mefistoToDS,
+ double scalex, double scaley)
+ {
--- /dev/null
+Description: Fixes GCC8 FTBFS due to included copy of SMESH.
+Author: Kurt Kremitzki <kurt@kwk.systems>
+Last-Updated: 2018-08-10
+--- a/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx
++++ b/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx
+@@ -221,8 +221,8 @@
+ // WARNING: this comparator makes impossible to store both nodes and elements in the same set
+ // because there are nodes and elements with the same ID. Use TIDTypeCompare for such containers.
+ struct TIDCompare {
+- bool operator () (const SMDS_MeshElement* e1, const SMDS_MeshElement* e2) const
+- { return e1->GetID() < e2->GetID(); }
++ template<typename T> bool operator () (const T* e1, const T* e2) const
++ { return static_cast<const SMDS_MeshElement*>(e1)->GetID() < static_cast<const SMDS_MeshElement*>(e2)->GetID(); }
+ };
+
+ #endif
--- /dev/null
+Description: Fix compilation against vtk9
+Author: wmayer <wmayer@users.sourceforge.net>
+Origin: https://github.com/wwmayer/FreeCAD/commit/bb9bcbd51df7c3cb76c5823038e4ea0f7e25a9ff
+Last-Update: 2021-09-23
+
+Index: freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp
+===================================================================
+--- freecad.orig/src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp
++++ freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp
+@@ -360,6 +360,7 @@ void SMDS_UnstructuredGrid::copyBloc(vtk
+ newLocations->SetValue(alreadyCopied, newLoc);
+ alreadyCopied++;
+ }
++#endif
+ }
+
+ int SMDS_UnstructuredGrid::CellIdToDownId(int vtkCellId)
+Index: freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp
+===================================================================
+--- freecad.orig/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp
++++ freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp
+@@ -100,6 +100,19 @@ bool SMDS_VtkEdge::ChangeNodes(const SMD
+ bool SMDS_VtkEdge::IsMediumNode(const SMDS_MeshNode* node) const
+ {
+ vtkUnstructuredGrid* grid = SMDS_Mesh::_meshList[myMeshId]->getGrid();
++#ifdef VTK_CELL_ARRAY_V2
++ vtkNew<vtkIdList> cellPoints;
++ grid->GetCellPoints(myVtkID, cellPoints.GetPointer());
++ if (nbNodes != cellPoints->GetNumberOfIds())
++ {
++ MESSAGE("ChangeNodes problem: not the same number of nodes " << cellPoints->GetNumberOfIds() << " -> " << nbNodes);
++ return false;
++ }
++ for (int i = 0; i < nbNodes; i++)
++ {
++ cellPoints->SetId(i, nodes[i]->getVtkId());
++ }
++#else
+ vtkIdType npts = 0;
+ vtkIdTypePtr pts = 0;
+ grid->GetCellPoints(myVtkID, npts, pts);
+Index: freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp
+===================================================================
+--- freecad.orig/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp
++++ freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp
+@@ -379,7 +379,7 @@ void SMDS_VtkFace::ChangeApex(SMDS_MeshN
+ cellPoints->SetId(0, node->getVtkId());
+ #else
+ vtkIdType npts = 0;
+- vtkIdType* pts = 0;
++ vtkIdTypePtr pts = 0;
+ grid->GetCellPoints(myVtkID, npts, pts);
+ grid->RemoveReferenceToCell(pts[0], myVtkID);
+ pts[0] = node->getVtkId();
+Index: freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp
+===================================================================
+--- freecad.orig/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp
++++ freecad/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp
+@@ -147,7 +147,7 @@ bool SMDS_VtkVolume::ChangeNodes(const S
+ }
+ #else
+ vtkIdType npts = 0;
+- vtkIdType* pts = 0;
++ vtkIdTypePtr pts = 0;
+ grid->GetCellPoints(myVtkID, npts, pts);
+ if (nbNodes != npts)
+ {
--- /dev/null
+Description: Use int instead of deprecated `np.int`
+Author: Kurt Kremitzki <kkremitzki@debian.org
+Last-Update: 2023-01-23
+
+--- a/src/Mod/Fem/femmesh/meshtools.py
++++ b/src/Mod/Fem/femmesh/meshtools.py
+@@ -485,7 +485,7 @@
+ # fem_objects = FreeCAD FEM document objects
+ # get femelements for reference shapes of each obj.References
+ count_femelements = 0
+- referenced_femelements = np.zeros((max(femelement_table.keys())+1,),dtype=np.int)
++ referenced_femelements = np.zeros((max(femelement_table.keys())+1,),dtype=int)
+ has_remaining_femelements = None
+ for fem_object_i, fem_object in enumerate(fem_objects):
+ obj = fem_object["Object"]
--- /dev/null
+Description: Fix break caused by hidden dependency on 3rd party library (OpenCASCADE) "using namespace std"
+Author: Kurt Kremitzki <kkremitzki@debian.org>
+Last-Updated: 2021-09-06
+
+--- a/src/Mod/Raytracing/App/RayFeature.cpp
++++ b/src/Mod/Raytracing/App/RayFeature.cpp
+@@ -82,19 +82,19 @@
+ // This must not be done in PovTools::writeShape!\r
+ long t = Transparency.getValue();\r
+ const App::Color& c = Color.getValue();\r
+- result << "// instance to render" << endl\r
+- << "object {" << Name << endl\r
+- << " texture {" << endl;\r
++ result << "// instance to render" << std::endl\r
++ << "object {" << Name << std::endl\r
++ << " texture {" << std::endl;\r
+ if (t == 0) {\r
+- result << " pigment {color rgb <"<<c.r<<","<<c.g<<","<<c.b<<">}" << endl;\r
++ result << " pigment {color rgb <"<<c.r<<","<<c.g<<","<<c.b<<">}" << std::endl;\r
+ }\r
+ else {\r
+ float trans = t/100.0f;\r
+- result << " pigment {color rgb <"<<c.r<<","<<c.g<<","<<c.b<<"> transmit "<<trans<<"}" << endl;\r
++ result << " pigment {color rgb <"<<c.r<<","<<c.g<<","<<c.b<<"> transmit "<<trans<<"}" << std::endl;\r
+ }\r
+- result << " finish {StdFinish } //definition on top of the project" << endl\r
+- << " }" << endl\r
+- << "}" << endl ;\r
++ result << " finish {StdFinish } //definition on top of the project" << std::endl\r
++ << " }" << std::endl\r
++ << "}" << std::endl ;\r
+ \r
+ // Apply the resulting fragment\r
+ Result.setValue(result.str().c_str());\r
--- /dev/null
+--- a/src/Mod/Test/TestPythonSyntax.py
++++ b/src/Mod/Test/TestPythonSyntax.py
+@@ -58,9 +58,11 @@
+ """
+ def setUp(self):
+ self.whitelist = []
++ self.whitelist += ["ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf.py"]
+ self.whitelist += ["automotive_design.py"]
+ self.whitelist += ["ifc2x3.py"]
+ self.whitelist += ["ifc4.py"]
++ self.whitelist += ["__exec_old.py"]
+
+
+ def testAll(self):
--- /dev/null
+Description: Single instance of application.
+Author: Håvard Flaget Aasen <haavard_aasen@yahoo.no>
+Forwarded: no
+Last-Update: 2021-12-26
+---
+--- a/src/XDGData/org.freecadweb.FreeCAD.desktop
++++ b/src/XDGData/org.freecadweb.FreeCAD.desktop
+@@ -10,7 +10,7 @@
+ GenericName[de]=CAD-Anwendung
+ GenericName[pl]=Aplikacja CAD
+ GenericName[ru]=Система автоматизированного проектирования
+-Exec=FreeCAD %F
++Exec=/usr/bin/freecad - --single-instance %F
+ Terminal=false
+ Type=Application
+ Icon=org.freecadweb.FreeCAD
--- /dev/null
+fix-occt-7.5.2.patch
+opencascade74.patch
+fix_gcc8_ftbfs.patch
+fix_armel_FTBFS.patch
+fix-cmake-extra-license.patch
+do_not_install_binary_examples.patch
+exclude_ply.patch
+disable_memory_check.patch
+#python3.8.patch
+python3.8-syntax.diff
+fix-s390x-test-fail-skip-load-old-file.patch
+run_single-instance.patch
+fix-1014875-arm-FTBFS.patch
+fix-1017598.patch
+bug-993089-dxf-support-desktop-file.patch
+numpy-1.24.patch
--- /dev/null
+#!/usr/bin/make -f
+%:
+ dh $@ --buildsystem=cmake --with python3
+
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)
+export DEB_BUILD_MAINT_OPTIONS = hardening=+all,+bindnow
+
+CPPFLAGS:=$(shell dpkg-buildflags --get CPPFLAGS) -Wall -fpermissive
+CFLAGS:=$(shell dpkg-buildflags --get CFLAGS) $(CPPFLAGS) -flto
+CXXFLAGS:=$(shell dpkg-buildflags --get CXXFLAGS) $(CPPFLAGS) -I/usr/include/python$(shell py3versions -d -v) -flto
+LDFLAGS:=$(shell dpkg-buildflags --get LDFLAGS) -Wl,--as-needed -Wl,-flto
+
+py3ver = $(shell py3versions -d -v | tr -d .)
+ifeq (1,$(shell expr ${py3ver} \< 38 ))
+ py3ver := $(py3ver)m
+endif
+
+extra_flags += \
+-DBUILD_QT5=ON \
+-DBUILD_FLAT_MESH=ON \
+-DFREECAD_BUILD_DEBIAN=ON \
+-DFREECAD_USE_PYBIND11=ON \
+-DCMAKE_CXX_FLAGS="$(CXXFLAGS)" \
+-DCMAKE_C_FLAGS="$(CFLAGS)" \
+-DCMAKE_SHARED_LINKER_FLAGS="$(LDFLAGS)" \
+-DLIB_SUFFIX="" \
+-DCMAKE_BUILD_TYPE=RelWithDebInfo \
+-DCMAKE_INSTALL_DATADIR="/usr/share/freecad" \
+-DCMAKE_INSTALL_DOCDIR="/usr/share/doc/freecad-doc" \
+-DCMAKE_INSTALL_PREFIX="/usr/share/freecad" \
+-DPYTHON_CONFIG_SUFFIX=".cpython-$(py3ver)-$(DEB_HOST_MULTIARCH)"
+
+py3_flags = \
+-DPYTHON_EXECUTABLE="/usr/bin/python3" \
+-DCMAKE_INSTALL_LIBDIR="/usr/lib/freecad-python3/lib"
+
+override_dh_auto_configure:
+ dh_auto_configure --builddirectory=debian/build-py3 -- \
+ $(extra_flags) \
+ $(py3_flags)
+
+override_dh_auto_build:
+ dh_auto_build --builddirectory=debian/build-py3
+
+override_dh_auto_test:
+ dh_auto_test --builddirectory=debian/build-py3
+
+override_dh_auto_install:
+ dh_auto_install --builddirectory=debian/build-py3
+ mv debian/tmp/usr/share/freecad/bin/FreeCADCmd \
+ debian/tmp/usr/share/freecad/bin/FreeCADCmd-Python3
+ mv debian/tmp/usr/share/freecad/bin/FreeCAD \
+ debian/tmp/usr/share/freecad/bin/FreeCAD-Python3
+
+override_dh_compress:
+ dh_compress -X.qch -X.qhc
+
+override_dh_installchangelogs:
+ dh_installchangelogs ChangeLog.txt
+
+override_dh_installexamples:
+
+override_dh_missing:
+ dh_missing --list-missing
+
+override_dh_auto_clean:
+ dh_auto_clean
+ rm -rf debian/build-py3 $$(find . -name __pycache__ -type d)
--- /dev/null
+---
+include:
+ - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/salsa-ci.yml
+ - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/pipeline-jobs.yml
--- /dev/null
+#!/bin/bash
+
+# The script creates a tar.xz tarball from git-repository of freecad-project
+# ./get_orig_src.sh commitID - creates a tarball of specified commit
+# ./get_orig_src.sh - creates a tarball of the latest version
+# Packages, that needs to be installed to use the script:
+# atool, git-core
+
+set -e
+
+git clone git://free-cad.git.sourceforge.net/gitroot/free-cad/free-cad git_temp_packaging
+
+cd git_temp_packaging
+
+if [ $1 ]
+then
+ echo 'Checking out the revision ' $1
+ git checkout -b newvers $1
+else
+ echo 'Using the latest revision'
+fi
+
+GIT_CMT_COUNT=$(git rev-list HEAD | wc -l)
+
+DEB_VER=0.13.$GIT_CMT_COUNT-dfsg
+FOLDER_NAME=freecad-$DEB_VER
+TARBALL_NAME=freecad_$DEB_VER.orig.tar.xz
+
+echo $DEB_VER
+echo $FOLDER_NAME
+echo $TARBALL_NAME
+
+python src/Tools/SubWCRev.py
+
+cd ..
+
+rm -fr $FOLDER_NAME
+
+mv git_temp_packaging $FOLDER_NAME
+rm -rf $FOLDER_NAME/.git
+rm -rf $FOLDER_NAME/src/3rdParty/CxImage
+rm -rf $FOLDER_NAME/src/3rdParty/Pivy
+rm -rf $FOLDER_NAME/src/3rdParty/Pivy-0.5
+rm -rf $FOLDER_NAME/src/3rdParty/ANN/doc/ANNmanual.pdf
+rm -rf $FOLDER_NAME/src/Mod/Ship/simRun/theory/main.pdf
+rm -rf $FOLDER_NAME/src/Mod/Mod/Robot/Lib/Kuka/*.pdf
+rm -rf $FOLDER_NAME/src/Doc/TiddlySaver.jar
+rm -rf $FOLDER_NAME/data/examples/*.FCStd
+
+
+tar Jcvf $TARBALL_NAME $FOLDER_NAME
+
+rm -fr $FOLDER_NAME
--- /dev/null
+3.0 (quilt)
--- /dev/null
+# The following file is an icon from the Tango Desktop Project, licensed under\r
+# public domain\r
+# https://commons.wikimedia.org/wiki/File:Edit-cut.svg\r
+freecad source: license-problem-cc-by-nc-sa src/Gui/Icons/edit-cut.svg\r
+freecad source: license-problem-cc-by-nc-sa src/Mod/TechDraw/Gui/Resources/icons/MRTE/edit-cut.svg\r
--- /dev/null
+Tests: freecadtest
+Depends: freecad, xvfb, xauth
+Restrictions: allow-stderr
--- /dev/null
+#!/bin/dash
+# autopkgtest check
+# (C) 2014 Anton Gladky <gladk@debian.org>
+
+set -e
+
+export FREECAD_USER_HOME="$AUTOPKGTEST_TMP"
+
+WORKDIR=$(mktemp -d)
+trap "rm -rf $WORKDIR" 0 INT QUIT ABRT PIPE TERM
+cd $WORKDIR
+
+tests_ok="TestSpreadsheet TestSketcherApp MeshTestsApp TestAddonManagerApp TestPartDesignApp BaseTests UnitTests Document Metadata UnicodeTests TestPythonSyntax TestDraft TestPartApp TestFemApp TestTechDrawApp"
+
+# does not work on s390x -- https://forum.freecadweb.org/viewtopic.php?f=15&t=71764
+# (this variable is just for documentation, it is not used below)
+tests_flaky=TestPathApp
+
+if dpkg-architecture -e s390x
+then
+ for t in $tests_ok
+ do
+ echo "### Running Test $t ### "
+ freecadcmd -t $t
+ done
+else
+ freecadcmd -t 0
+fi
+
+echo "freecadcmd: OK"
+
+# GUI test suite (ensuring also that libraries can be loaded)
+# (As there are some tests that fail, run only one randomly choosen test…)
+# xvfb-run freecad --run-test TestSpreadsheet.SpreadsheetCases
+# echo "freecad: OK"
--- /dev/null
+---
+Bug-Database: https://github.com/FreeCAD/FreeCAD/issues
+Bug-Submit: https://github.com/FreeCAD/FreeCAD/issues/new
+Repository: https://github.com/FreeCAD/FreeCAD.git
+Repository-Browse: https://github.com/FreeCAD/FreeCAD
+Registry:
+ - Name: SciCrunch
+ Entry: SCR_022535
--- /dev/null
+version=4
+opts=repacksuffix=+dfsg1,uversionmangle=s/(\d)[_\.\-\+]?((RC|rc|pre|dev|beta|alpha|b|a)\d*)$/$1~$2/,dversionmangle=s/\+(debian|dfsg|ds|deb)\d*$// \
+https://github.com/FreeCAD/FreeCAD/tags .*/(\d.*).*(?<!_pre)\.(?:tgz|tbz2|txz|tar\.(?:gz|bz2|xz))
projects / freecad.git / commitdiff