--- /dev/null
+1.2.0-1
+-------
+
+some patches have been removed, makefile had a lot of changes,
+the long running tests skip patch has been removed but may need
+further investigation to see if it is still needed.
--- /dev/null
+The examples were removed from the upstream tarball due to #869581
--- /dev/null
+libzstd (1.3.4+dfsg-2) unstable; urgency=medium
+
+ * Add liblzma-dev and liblz4-dev to build-depends to enable xz and lz4 support
+ * Patch tests to avoid FTBFS on mips(el) architectures
+ * Use help2man for pzstd man page, drop patches providing obsolete man pages
+ * Update zstd.lintian-overrides, add more binaries without man pages
+ * Add override for dh_auto_test, on hurd run only simple tests
+ * Update 0012-typos.patch, forward to upstream
+
+ -- Alexandre Mestiashvili <mestia@debian.org> Wed, 02 May 2018 15:43:16 +0200
+
+libzstd (1.3.4+dfsg-1) unstable; urgency=medium
+
+ * Team upload.
+
+ [ Alexandre Mestiashvili ]
+ * New upstream version 1.3.4+dfsg
+ * Refresh patches, remove indexes
+ * Update d/libzstd1.symbols fixing minimal-version
+ * Update d/copyright, starting from 1.3.1 patent claim is removed
+ * Add comments to unstable symbols
+
+ [ Mattia Rizzolo ]
+ * Update copyright after the new upstream release.
+
+ [ Sascha Steinbiss ]
+ * Remove obsolete patch.
+ * Reword patch description.
+
+ -- Alexandre Mestiashvili <mestia@debian.org> Wed, 25 Apr 2018 10:39:39 +0200
+
+libzstd (1.3.3+dfsg-2) unstable; urgency=medium
+
+ * Team upload.
+
+ [ Dimitri John Ledkov ]
+ * Mark -dev and library packages Multi-Arch same.
+ * Update Vcs fields for salsa.
+ * Cleanup unused patches.
+
+ [ Andreas Hasenack ]
+ * d/rules: also run the clean Makefile target in the pzstd directory.
+
+ [ Alexandre Mestiashvili ]
+ * d/control: Update my email address.
+ * d/rules:
+ + Disable tests if DEB_BUILD_OPTIONS set to nocheck.
+ + Use dh_auto_build instead of $(MAKE) to avoid cross build failures.
+ Thanks to Helmut Grohne for the patch. Closes: #895925
+ + Use dh_auto_clean instead of $(MAKE).
+
+ [ Adam Borowski ]
+ * Enable build on riscv64. Closes: #895259
+
+ [ Mattia Rizzolo ]
+ * Bump debhelper compat level to 11.
+ * Bump Standards-Version to 4.1.4, no changes needed.
+ * Remove patch skipping a test on hurd-i386: allegedly the underlying issue
+ has been fixed instead.
+
+ -- Mattia Rizzolo <mattia@debian.org> Sat, 21 Apr 2018 11:26:59 +0200
+
+libzstd (1.3.3+dfsg-1) unstable; urgency=medium
+
+ * Update File-Excluded list in d/copyright
+ * New upstream version 1.3.3+dfsg, Closes: #883816
+ * Refresh patches
+ * Add zlib1g-dev to Build-Deps to enable gzip support in zstd, Closes: #883827
+
+ -- Alexandre Mestiashvili <alex@biotec.tu-dresden.de> Thu, 21 Dec 2017 14:25:26 +0100
+
+libzstd (1.3.2+dfsg2-2) unstable; urgency=medium
+
+ * Team upload.
+ * Do not depend libzstd in zstd package since static linking seems
+ to be the preferred way to create the executable
+ Closes: #884876
+ * Standards-Version: 4.1.2
+
+ -- Andreas Tille <tille@debian.org> Thu, 21 Dec 2017 11:43:12 +0100
+
+libzstd (1.3.2+dfsg2-1) unstable; urgency=medium
+
+ * Update d/copyright:
+ - don't strip examples from source tarball
+ - note BSD and GPL-2 license for examples
+ * New upstream version 1.3.2+dfsg2
+ Closes: #883271
+ * Drop override_dh_auto_clean in d/rules as examples are back
+ * Drop 0010-do_not_make_examples.patch as examples are back
+ * Remove ruby-ronn from Build-Depends, as it renders libzstd package
+ not installable on many architectures.
+ Use man page shipped by upstream
+ * Apply cme fix dpkg, reformat 0010-do-not.. patch header,
+ fix VCS-Browser field
+ * Add override for manpage-has-errors-from-man lintian warning
+ * Install examples with libzstd-dev
+
+ -- Alexandre Mestiashvili <alex@biotec.tu-dresden.de> Fri, 01 Dec 2017 17:18:39 +0100
+
+libzstd (1.3.2+dfsg1-1) unstable; urgency=medium
+
+ [ Alexandre Mestiashvili ]
+ * Update Files-Excluded section in d/copyright
+ * New upstream version 1.3.2+dfsg1
+ * Update d/rules:
+ - trick dh_auto_clean with empty exmaples dir
+ - force man page generation
+ * Add symbols file for libzstd1
+ * Add 0011-skip-long-running-tests_on_hurd.patch fixing tests on gnu hurd
+ * Add d/patches/0012-typos.patch fixing a typo
+ * Enable autopkgtests via d/tests/control
+ * Override lintian's complain about missing man pages
+ * Add myself to uploaders
+ * Add ruby-ronn to build-deps, needed for man page generation
+
+ [ Andreas Tille ]
+ * d/watch: Fix version mangling
+
+ -- Alexandre Mestiashvili <alex@biotec.tu-dresden.de> Thu, 30 Nov 2017 23:32:41 +0100
+
+libzstd (1.3.2+dfsg-1) unstable; urgency=medium
+
+ * Team upload
+ * New upstream version
+ Closes: #881187
+ * Standards-Version: 4.1.1
+
+ -- Andreas Tille <tille@debian.org> Thu, 09 Nov 2017 07:55:32 +0100
+
+libzstd (1.3.1+dfsg-2) unstable; urgency=medium
+
+ * Team upload
+ * Follow hint given by James Cowgill to recude number of threads
+ on 32Bit MIPS architecture
+ Closes: #876416
+
+ -- Andreas Tille <tille@debian.org> Fri, 22 Sep 2017 15:29:35 +0200
+
+libzstd (1.3.1+dfsg-1) unstable; urgency=medium
+
+ * Team upload
+ * New upstream version
+ * Exclude examples from upstream tarball
+ Closes: #869581
+ * debhelper 10
+ * cme fix dpkg-control
+ * Standards-Version: 4.1.0 (no changes needed)
+ * Fix copyright
+
+ -- Andreas Tille <tille@debian.org> Wed, 06 Sep 2017 15:29:29 +0200
+
+libzstd (1.2.0-1) unstable; urgency=medium
+
+ * New upstream release (Closes: #863159).
+
+ -- Olivier Sallou <osallou@debian.org> Wed, 24 May 2017 11:28:27 +0000
+
+libzstd (1.1.2-1) unstable; urgency=medium
+
+ * Team upload.
+ * New upstream version 1.1.2
+
+ -- Sascha Steinbiss <satta@debian.org> Sun, 15 Jan 2017 08:08:53 +0000
+
+libzstd (1.1.1-1) unstable; urgency=medium
+
+ * New upstream version 1.1.1 (Closes: #844248)
+ * Whitespace fix to d/control
+ * Ensure hardening flags pass through to compiler by appending to CPPFLAGS
+
+ -- Kevin Murray <kdmfoss@gmail.com> Sun, 20 Nov 2016 16:12:58 +0100
+
+libzstd (1.1.0-1) unstable; urgency=medium
+
+ * New upstream version 1.1.0 (Closes: #839960)
+ * Change uploader email
+ * Build new pzstd binary, including manpage
+ * Fix miscellaneous issues with d/rules and d/*.install
+ * Move docs from libzstd-dev to the zstd binary
+
+ -- Kevin Murray <kdmfoss@gmail.com> Sun, 13 Nov 2016 11:23:03 +0000
+
+libzstd (1.0.0-1) unstable; urgency=medium
+
+ * Imported Upstream version 1.0.0 (Closes: #836574)
+ * Bump library package name to libzstd1
+ * Changed project URLs, copyrights after move to facebook.
+ * d/rules: hardening=+all
+
+ -- Kevin Murray <kdmfoss@gmail.com> Sun, 04 Sep 2016 14:45:24 +1000
+
+libzstd (0.8.0-1) unstable; urgency=medium
+
+ [ Kevin Murray ]
+ * New upstream version (Closes: #834114)
+
+ [ Andreas Tille ]
+ * hardening=+bindnow
+
+ -- Kevin Murray <kdmfoss@gmail.com> Thu, 21 Jul 2016 10:56:02 +1000
+
+libzstd (0.5.1-1) unstable; urgency=medium
+
+ [ Kevin Murray ]
+ * New upstream version (fixes a FTBFS)
+ * Package pkgconfig file (Closes: #813854)
+ * Fix path to tagged archives in d/watch
+ * Add vcs URLs
+ * Bump to standards version 3.9.7
+
+ [ Mattia Rizzolo ]
+ * debian/rules: Remove a lot of uneeded comments and lines
+
+ -- Kevin Murray <kdmfoss@gmail.com> Thu, 17 Mar 2016 12:59:04 +0000
+
+libzstd (0.4.7-1) unstable; urgency=low
+
+ * New upstream version
+ * Remove build date encoding to enable reproducible build
+
+ -- Kevin Murray <kdmfoss@gmail.com> Wed, 03 Feb 2016 11:26:21 +0200
+
+libzstd (0.4.5-1) unstable; urgency=low
+
+ * Initial release (Closes: #806767)
+
+ -- Kevin Murray <kdmfoss@gmail.com> Tue, 01 Dec 2015 13:54:36 +1100
--- /dev/null
+Source: libzstd
+Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
+Uploaders: Kevin Murray <kdmfoss@gmail.com>,
+ Olivier Sallou <osallou@debian.org>,
+ Alexandre Mestiashvili <mestia@debian.org>
+Section: libs
+Priority: optional
+Build-Depends: d-shlibs,
+ debhelper (>= 11),
+ help2man,
+ liblz4-dev,
+ liblzma-dev,
+ zlib1g-dev
+Standards-Version: 4.1.4
+Vcs-Browser: https://salsa.debian.org/med-team/libzstd
+Vcs-Git: https://salsa.debian.org/med-team/libzstd.git
+Homepage: https://github.com/facebook/zstd
+
+Package: libzstd-dev
+Architecture: any
+Multi-Arch: same
+Section: libdevel
+Depends: libzstd1 (= ${binary:Version}), ${misc:Depends}
+Description: fast lossless compression algorithm -- development files
+ Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
+ real-time compression scenarios at zlib-level compression ratio.
+ .
+ This package contains the headers and static library.
+
+Package: libzstd1
+Architecture: any
+Multi-Arch: same
+Section: libs
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Description: fast lossless compression algorithm
+ Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
+ real-time compression scenarios at zlib-level compression ratio.
+ .
+ This package contains the shared library.
+
+Package: zstd
+Architecture: any
+Section: utils
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Description: fast lossless compression algorithm -- CLI tool
+ Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
+ real-time compression scenarios at zlib-level compression ratio.
+ .
+ This package contains the CLI program implementing zstd.
--- /dev/null
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: Zstd
+Source: https://github.com/facebook/zstd
+Files-Excluded: appveyor.yml
+ circle.yml
+ build/*
+ programs/windres/*
+ .travis.yml
+ .buckversion
+ .buckconfig
+
+Files: *
+Copyright: 2013-2018, Yann Collet
+ 2016, Przemyslaw Skibinski
+ 2016-2018, Facebook, Inc.
+License: BSD-3-clause and GPL-2
+Comment: Starting from 1.3.1 zstd's patent claim is removed
+ see: https://github.com/facebook/zstd/pull/801
+
+Files: zlibWrapper/examples/*.c
+Copyright: 1995-2006, 2011 Jean-loup Gailly
+License: zlib
+
+Files: zlibWrapper/gz*.c
+Copyright: (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
+License: zlib
+
+License: zlib
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+ .
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+ .
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgement in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+Files: contrib/linux-kernel/fs/squashfs/*
+Copyright: 2017 Facebook
+License: GPL-2+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2,
+ or (at your option) any later version.
+ .
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+ .
+ On Debian systems you can find a full copy of the GNU General Public
+ License version 2 at /usr/share/common-licenses/GPL-2.
+
+Files: lib/dictBuilder/divsufsort.*
+Copyright: 2003-2008, Yuta Mori
+License: Expat
+
+Files: examples/*
+Copyright: 2016-present, Yann Collet, Facebook, Inc.
+License: BSD-3-clause and GPL-2
+
+Files: debian/*
+Copyright: 2015-2016 Kevin Murray <spam@kdmurray.id.au>
+License: Expat
+
+License: Expat
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+ .
+ The above copyright notice and this permission notice shall be
+ included in all copies or substantial portions of the Software.
+ .
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ SOFTWARE.
+
+License: GPL-2
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License, v2, as
+ published by the Free Software Foundation
+ .
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ .
+ On Debian systems, the complete text of the GNU General Public
+ License version 2 can be found in `/usr/share/common-licenses/GPL-2'.
+
+License: BSD-3-clause
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of cereal nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+ .
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL RANDOLPH VOORHIES OR SHANE GRANT BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--- /dev/null
+examples/*
--- /dev/null
+libzstd.so.1 libzstd1 #MINVER#
+ ZBUFF_compressContinue@Base 1.3.2
+ ZBUFF_compressEnd@Base 1.3.2
+ ZBUFF_compressFlush@Base 1.3.2
+ ZBUFF_compressInit@Base 1.3.2
+ ZBUFF_compressInitDictionary@Base 1.3.2
+ ZBUFF_compressInit_advanced@Base 1.3.2
+ ZBUFF_createCCtx@Base 1.3.2
+ ZBUFF_createCCtx_advanced@Base 1.3.2
+ ZBUFF_createDCtx@Base 1.3.2
+ ZBUFF_createDCtx_advanced@Base 1.3.2
+ ZBUFF_decompressContinue@Base 1.3.2
+ ZBUFF_decompressInit@Base 1.3.2
+ ZBUFF_decompressInitDictionary@Base 1.3.2
+ ZBUFF_freeCCtx@Base 1.3.2
+ ZBUFF_freeDCtx@Base 1.3.2
+ ZBUFF_getErrorName@Base 1.3.2
+ ZBUFF_isError@Base 1.3.2
+ ZBUFF_recommendedCInSize@Base 1.3.2
+ ZBUFF_recommendedCOutSize@Base 1.3.2
+ ZBUFF_recommendedDInSize@Base 1.3.2
+ ZBUFF_recommendedDOutSize@Base 1.3.2
+ ZDICT_addEntropyTablesFromBuffer@Base 1.3.2
+ ZDICT_finalizeDictionary@Base 1.3.2
+ ZDICT_getDictID@Base 1.3.2
+ ZDICT_getErrorName@Base 1.3.2
+ ZDICT_isError@Base 1.3.2
+ ZDICT_optimizeTrainFromBuffer_cover@Base 1.3.2
+ ZDICT_trainFromBuffer@Base 1.3.2
+ ZDICT_trainFromBuffer_cover@Base 1.3.2
+ ZDICT_trainFromBuffer_legacy@Base 1.3.2
+ ZSTDMT_compressCCtx@Base 1.3.2
+ ZSTDMT_compressStream@Base 1.3.2
+ ZSTDMT_compressStream_generic@Base 1.3.2
+ ZSTDMT_compress_advanced@Base 1.3.2
+ ZSTDMT_createCCtx@Base 1.3.2
+ ZSTDMT_createCCtx_advanced@Base 1.3.2
+ ZSTDMT_endStream@Base 1.3.2
+ ZSTDMT_flushStream@Base 1.3.2
+ ZSTDMT_freeCCtx@Base 1.3.2
+ ZSTDMT_initCStream@Base 1.3.2
+ ZSTDMT_initCStream_advanced@Base 1.3.2
+ ZSTDMT_initCStream_usingCDict@Base 1.3.2
+ ZSTDMT_resetCStream@Base 1.3.2
+ ZSTDMT_setMTCtxParameter@Base 1.3.2
+ ZSTDMT_sizeof_CCtx@Base 1.3.2
+ ZSTD_CCtxParam_setParameter@Base 1.3.2
+ (should only be used when static linking)ZSTD_CCtxParams_init@Base 1.3.4
+ (should only be used when static linking)ZSTD_CCtxParams_init_advanced@Base 1.3.4
+ (should only be used when static linking)ZSTD_CCtxParams_reset@Base 1.3.4
+ ZSTD_CCtx_loadDictionary@Base 1.3.2
+ ZSTD_CCtx_loadDictionary_advanced@Base 1.3.2
+ ZSTD_CCtx_loadDictionary_byReference@Base 1.3.2
+ ZSTD_CCtx_refCDict@Base 1.3.2
+ ZSTD_CCtx_refPrefix@Base 1.3.2
+ ZSTD_CCtx_refPrefix_advanced@Base 1.3.2
+ ZSTD_CCtx_reset@Base 1.3.2
+ ZSTD_CCtx_setParameter@Base 1.3.2
+ ZSTD_CCtx_setParametersUsingCCtxParams@Base 1.3.2
+ ZSTD_CCtx_setPledgedSrcSize@Base 1.3.2
+ ZSTD_CStreamInSize@Base 1.3.2
+ ZSTD_CStreamOutSize@Base 1.3.2
+ ZSTD_DCtx_loadDictionary@Base 1.3.4
+ ZSTD_DCtx_loadDictionary_advanced@Base 1.3.4
+ ZSTD_DCtx_loadDictionary_byReference@Base 1.3.4
+ ZSTD_DCtx_refDDict@Base 1.3.4
+ ZSTD_DCtx_refPrefix@Base 1.3.4
+ ZSTD_DCtx_refPrefix_advanced@Base 1.3.4
+ ZSTD_DCtx_reset@Base 1.3.2
+ ZSTD_DCtx_setFormat@Base 1.3.2
+ ZSTD_DCtx_setMaxWindowSize@Base 1.3.2
+ ZSTD_DStreamInSize@Base 1.3.2
+ ZSTD_DStreamOutSize@Base 1.3.2
+ ZSTD_adjustCParams@Base 1.3.2
+ ZSTD_checkCParams@Base 1.3.2
+ ZSTD_compress@Base 1.3.2
+ ZSTD_compressBegin@Base 1.3.2
+ ZSTD_compressBegin_advanced@Base 1.3.2
+ ZSTD_compressBegin_usingCDict@Base 1.3.2
+ ZSTD_compressBegin_usingCDict_advanced@Base 1.3.2
+ ZSTD_compressBegin_usingDict@Base 1.3.2
+ ZSTD_compressBlock@Base 1.3.2
+ ZSTD_compressBound@Base 1.3.2
+ ZSTD_compressCCtx@Base 1.3.2
+ ZSTD_compressContinue@Base 1.3.2
+ ZSTD_compressEnd@Base 1.3.2
+ ZSTD_compressStream@Base 1.3.2
+ ZSTD_compress_advanced@Base 1.3.2
+ ZSTD_compress_generic@Base 1.3.2
+ ZSTD_compress_generic_simpleArgs@Base 1.3.2
+ ZSTD_compress_usingCDict@Base 1.3.2
+ ZSTD_compress_usingCDict_advanced@Base 1.3.2
+ ZSTD_compress_usingDict@Base 1.3.2
+ ZSTD_copyCCtx@Base 1.3.2
+ ZSTD_copyDCtx@Base 1.3.2
+ ZSTD_createCCtx@Base 1.3.2
+ ZSTD_createCCtxParams@Base 1.3.2
+ ZSTD_createCCtx_advanced@Base 1.3.2
+ ZSTD_createCDict@Base 1.3.2
+ ZSTD_createCDict_advanced@Base 1.3.2
+ ZSTD_createCDict_byReference@Base 1.3.2
+ ZSTD_createCStream@Base 1.3.2
+ ZSTD_createCStream_advanced@Base 1.3.2
+ ZSTD_createDCtx@Base 1.3.2
+ ZSTD_createDCtx_advanced@Base 1.3.2
+ ZSTD_createDDict@Base 1.3.2
+ ZSTD_createDDict_advanced@Base 1.3.2
+ ZSTD_createDDict_byReference@Base 1.3.2
+ ZSTD_createDStream@Base 1.3.2
+ ZSTD_createDStream_advanced@Base 1.3.2
+ ZSTD_decodingBufferSize_min@Base 1.3.2
+ ZSTD_decompress@Base 1.3.2
+ ZSTD_decompressBegin@Base 1.3.2
+ ZSTD_decompressBegin_usingDDict@Base 1.3.2
+ ZSTD_decompressBegin_usingDict@Base 1.3.2
+ ZSTD_decompressBlock@Base 1.3.2
+ ZSTD_decompressContinue@Base 1.3.2
+ ZSTD_decompressDCtx@Base 1.3.2
+ ZSTD_decompressStream@Base 1.3.2
+ ZSTD_decompress_generic@Base 1.3.2
+ ZSTD_decompress_generic_simpleArgs@Base 1.3.2
+ ZSTD_decompress_usingDDict@Base 1.3.2
+ ZSTD_decompress_usingDict@Base 1.3.2
+ ZSTD_endStream@Base 1.3.2
+ ZSTD_estimateCCtxSize@Base 1.3.2
+ ZSTD_estimateCCtxSize_usingCCtxParams@Base 1.3.2
+ ZSTD_estimateCCtxSize_usingCParams@Base 1.3.2
+ ZSTD_estimateCDictSize@Base 1.3.2
+ ZSTD_estimateCDictSize_advanced@Base 1.3.2
+ ZSTD_estimateCStreamSize@Base 1.3.2
+ ZSTD_estimateCStreamSize_usingCCtxParams@Base 1.3.2
+ ZSTD_estimateCStreamSize_usingCParams@Base 1.3.2
+ ZSTD_estimateDCtxSize@Base 1.3.2
+ ZSTD_estimateDDictSize@Base 1.3.2
+ ZSTD_estimateDStreamSize@Base 1.3.2
+ ZSTD_estimateDStreamSize_fromFrame@Base 1.3.2
+ ZSTD_findDecompressedSize@Base 1.3.2
+ ZSTD_findFrameCompressedSize@Base 1.3.2
+ ZSTD_flushStream@Base 1.3.2
+ ZSTD_frameHeaderSize@Base 1.3.2
+ ZSTD_freeCCtx@Base 1.3.2
+ ZSTD_freeCCtxParams@Base 1.3.2
+ ZSTD_freeCDict@Base 1.3.2
+ ZSTD_freeCStream@Base 1.3.2
+ ZSTD_freeDCtx@Base 1.3.2
+ ZSTD_freeDDict@Base 1.3.2
+ ZSTD_freeDStream@Base 1.3.2
+ ZSTD_getBlockSize@Base 1.3.2
+ ZSTD_getCParams@Base 1.3.2
+ ZSTD_getDecompressedSize@Base 1.3.2
+ ZSTD_getDictID_fromDDict@Base 1.3.2
+ ZSTD_getDictID_fromDict@Base 1.3.2
+ ZSTD_getDictID_fromFrame@Base 1.3.2
+ ZSTD_getErrorCode@Base 1.3.2
+ ZSTD_getErrorName@Base 1.3.2
+ ZSTD_getErrorString@Base 1.3.2
+ ZSTD_getFrameContentSize@Base 1.3.2
+ ZSTD_getFrameHeader@Base 1.3.2
+ ZSTD_getParams@Base 1.3.2
+ ZSTD_initCStream@Base 1.3.2
+ ZSTD_initCStream_advanced@Base 1.3.2
+ ZSTD_initCStream_srcSize@Base 1.3.2
+ ZSTD_initCStream_usingCDict@Base 1.3.2
+ ZSTD_initCStream_usingCDict_advanced@Base 1.3.2
+ ZSTD_initCStream_usingDict@Base 1.3.2
+ ZSTD_initDStream@Base 1.3.2
+ ZSTD_initDStream_usingDDict@Base 1.3.2
+ ZSTD_initDStream_usingDict@Base 1.3.2
+ ZSTD_initStaticCCtx@Base 1.3.2
+ ZSTD_initStaticCDict@Base 1.3.2
+ ZSTD_initStaticCStream@Base 1.3.2
+ ZSTD_initStaticDCtx@Base 1.3.2
+ ZSTD_initStaticDDict@Base 1.3.2
+ ZSTD_initStaticDStream@Base 1.3.2
+ ZSTD_insertBlock@Base 1.3.2
+ ZSTD_isError@Base 1.3.2
+ ZSTD_isFrame@Base 1.3.2
+ ZSTD_maxCLevel@Base 1.3.2
+ ZSTD_nextInputType@Base 1.3.2
+ ZSTD_nextSrcSizeToDecompress@Base 1.3.2
+ ZSTD_resetCStream@Base 1.3.2
+ ZSTD_resetDStream@Base 1.3.2
+ ZSTD_setDStreamParameter@Base 1.3.2
+ ZSTD_sizeof_CCtx@Base 1.3.2
+ ZSTD_sizeof_CDict@Base 1.3.2
+ ZSTD_sizeof_CStream@Base 1.3.2
+ ZSTD_sizeof_DCtx@Base 1.3.2
+ ZSTD_sizeof_DDict@Base 1.3.2
+ ZSTD_sizeof_DStream@Base 1.3.2
+ ZSTD_versionNumber@Base 1.3.2
+ ZSTD_versionString@Base 1.3.2
--- /dev/null
+From: Kevin Murray <spam@kdmurray.id.au>
+Date: Mon, 14 Nov 2016 11:54:32 +1100
+Subject: Use bash for test script portablitity
+
+---
+ tests/playTests.sh | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- libzstd.orig/tests/playTests.sh
++++ libzstd/tests/playTests.sh
+@@ -1,4 +1,4 @@
+-#!/bin/sh -e
++#!/bin/bash -e
+
+ die() {
+ $ECHO "$@" 1>&2
--- /dev/null
+Description: Do not build zlibWrapper examples against embedded code copies.
+Author: Sascha Steinbiss <satta@debian.org>
+--- libzstd.orig/zlibWrapper/Makefile
++++ libzstd/zlibWrapper/Makefile
+@@ -13,7 +13,7 @@
+ ZSTDLIBDIR = ../lib
+ ZSTDLIBRARY = $(ZSTDLIBDIR)/libzstd.a
+ ZLIBWRAPPER_PATH = .
+-GZFILES = gzclose.o gzlib.o gzread.o gzwrite.o
++#GZFILES = gzclose.o gzlib.o gzread.o gzwrite.o
+ EXAMPLE_PATH = examples
+ PROGRAMS_PATH = ../programs
+ TEST_FILE = ../doc/zstd_compression_format.md
+@@ -70,16 +70,16 @@
+ #.c.o:
+ # $(CC) $(CFLAGS) $(CPPFLAGS) -c -o $@ $<
+
+-minigzip: $(EXAMPLE_PATH)/minigzip.o $(ZLIBWRAPPER_PATH)/zstd_zlibwrapper.o $(GZFILES) $(ZSTDLIBRARY)
++minigzip: $(EXAMPLE_PATH)/minigzip.o $(ZLIBWRAPPER_PATH)/zstd_zlibwrapper.o $(ZSTDLIBRARY)
+ $(CC) $(LDFLAGS) $^ $(ZSTDLIBRARY) $(ZLIB_LIBRARY) -o $@
+
+-minigzip_zstd: $(EXAMPLE_PATH)/minigzip.o $(ZLIBWRAPPER_PATH)/zstdTurnedOn_zlibwrapper.o $(GZFILES) $(ZSTDLIBRARY)
++minigzip_zstd: $(EXAMPLE_PATH)/minigzip.o $(ZLIBWRAPPER_PATH)/zstdTurnedOn_zlibwrapper.o $(ZSTDLIBRARY)
+ $(CC) $(LDFLAGS) $^ $(ZSTDLIBRARY) $(ZLIB_LIBRARY) -o $@
+
+-example: $(EXAMPLE_PATH)/example.o $(ZLIBWRAPPER_PATH)/zstd_zlibwrapper.o $(GZFILES) $(ZSTDLIBRARY)
++example: $(EXAMPLE_PATH)/example.o $(ZLIBWRAPPER_PATH)/zstd_zlibwrapper.o $(ZSTDLIBRARY)
+ $(CC) $(LDFLAGS) $^ $(ZLIB_LIBRARY) -o $@
+
+-example_zstd: $(EXAMPLE_PATH)/example.o $(ZLIBWRAPPER_PATH)/zstdTurnedOn_zlibwrapper.o $(GZFILES) $(ZSTDLIBRARY)
++example_zstd: $(EXAMPLE_PATH)/example.o $(ZLIBWRAPPER_PATH)/zstdTurnedOn_zlibwrapper.o $(ZSTDLIBRARY)
+ $(CC) $(LDFLAGS) $^ $(ZLIB_LIBRARY) -o $@
+
+ fitblk: $(EXAMPLE_PATH)/fitblk.o $(ZLIBWRAPPER_PATH)/zstd_zlibwrapper.o $(ZSTDLIBRARY)
+--- libzstd.orig/zlibWrapper/examples/example.c
++++ libzstd/zlibWrapper/examples/example.c
+@@ -27,7 +27,7 @@
+
+ /* @(#) $Id$ */
+
+-#include "zstd_zlibwrapper.h"
++#include "zlib.h"
+ #include <stdio.h>
+
+ #ifdef STDC
--- /dev/null
+Description: Fix typo in zstd man page s/minumum/minimum/
+From: Alex Mestiashvili <mailatgoogl@gmail.com>
+Forwarded: https://github.com/facebook/zstd/issues/1115
+--- libzstd.orig/programs/zstd.1.md
++++ libzstd/programs/zstd.1.md
+@@ -392,7 +392,7 @@
+
+ Larger/very small values usually decrease compression ratio.
+
+- The minumum _ldmslen_ is 4 and the maximum is 4096 (default: 64).
++ The minimum _ldmslen_ is 4 and the maximum is 4096 (default: 64).
+
+ - `ldmBucketSizeLog`=_ldmblog_, `ldmblog`=_ldmblog_:
+ Specify the size of each bucket for the hash table used for long distance
+--- libzstd.orig/programs/zstd.1
++++ libzstd/programs/zstd.1
+@@ -374,7 +374,7 @@
+ Larger/very small values usually decrease compression ratio\.
+ .
+ .IP
+-The minumum \fIldmslen\fR is 4 and the maximum is 4096 (default: 64)\.
++The minimum \fIldmslen\fR is 4 and the maximum is 4096 (default: 64)\.
+ .
+ .TP
+ \fBldmBucketSizeLog\fR=\fIldmblog\fR, \fBldmblog\fR=\fIldmblog\fR
--- /dev/null
+Subject: Skip memory heavy tests causing FTBFS on mips and mipsel buildds
+From: Alex Mestiashvili <mestia@debian.org>
+--- libzstd.orig/tests/playTests.sh
++++ libzstd/tests/playTests.sh
+@@ -761,9 +761,15 @@
+ $ECHO "\n===> zstdmt long round-trip tests "
+ roundTripTest -g80000000 -P99 "19 -T2" " "
+ roundTripTest -g5000000000 -P99 "1 -T2" " "
+- roundTripTest -g500000000 -P97 "1 -T999" " "
+- fileRoundTripTest -g4103M -P98 " -T0" " "
+- roundTripTest -g400000000 -P97 "1 --long=24 -T2" " "
++ DEBARCH=$(dpkg-architecture -qDEB_HOST_ARCH)
++ if [ "$DEBARCH" != 'mips' -a "$DEBARCH" != 'mipsel' ]
++ then
++ roundTripTest -g500000000 -P97 "1 -T999" " "
++ fileRoundTripTest -g4103M -P98 " -T0" " "
++ roundTripTest -g400000000 -P97 "1 --long=24 -T2" " "
++ else
++ $ECHO "\n**** skip memory greedy tests on $DEBARCH **** "
++ fi
+ else
+ $ECHO "\n**** no multithreading, skipping zstdmt tests **** "
+ fi
--- /dev/null
+Author: Adam Borowski <kilobyte@angband.pl>
+Last-Update: Mon, 09 Apr 2018 00:09:44 +0000
+Description: Enable build on riscv64
+Forwarded-Upstream: https://github.com/facebook/zstd/pull/1103
+
+--- a/contrib/pzstd/Makefile
++++ b/contrib/pzstd/Makefile
+@@ -50,7 +50,7 @@ GTEST_LIB = -L googletest/build/googlem
+ LIBS =
+
+ # Compilation commands
+-LD_COMMAND = $(CXX) $^ $(ALL_LDFLAGS) $(LIBS) -lpthread -o $@
++LD_COMMAND = $(CXX) $^ $(ALL_LDFLAGS) $(LIBS) -pthread -o $@
+ CC_COMMAND = $(CC) $(DEPFLAGS) $(ALL_CFLAGS) -c $< -o $@
+ CXX_COMMAND = $(CXX) $(DEPFLAGS) $(ALL_CXXFLAGS) -c $< -o $@
+
--- /dev/null
+0006-Use-bash-for-test-script-portablitity.patch
+0008-Address-embedded-zlib.patch
+0012-typos.patch
+pthread.patch
+0013-skip-memory-greedy-tests.patch
--- /dev/null
+#!/usr/bin/make -f
+
+export DH_VERBOSE=1
+
+DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)
+DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
+export DEB_BUILD_MAINT_OPTIONS=hardening=+all
+
+# Upstream's makefiles will respect PREFIX, and this means we avoid a patch
+export PREFIX=/usr
+
+HELP2MAN = help2man --no-info --help-option="'-h'" --no-discard-stderr
+mandir := $(CURDIR)/debian/zstd/usr/share/man/man1
+
+%:
+ dh $@
+
+DH_AUTO_CONFIGURE_OPTS :=
+ifneq (,$(filter nocheck,$(DEB_BUILD_OPTIONS)))
+ DH_AUTO_CONFIGURE_OPTS += -DZSTD_BUILD_TESTS:BOOL=OFF
+endif
+
+override_dh_auto_clean:
+ dh_auto_clean
+ dh_auto_clean --sourcedirectory=contrib/pzstd
+
+override_dh_auto_build:
+ dh_auto_build
+ dh_auto_build --sourcedirectory=contrib/pzstd/ -- pzstd
+
+override_dh_install:
+ # Call d-shlibmove to comply with library packaging guide
+ d-shlibmove --commit \
+ --multiarch \
+ --devunversioned \
+ --exclude-la \
+ --movedev "debian/tmp/usr/include/*" usr/include \
+ --movedev "debian/tmp/usr/lib/pkgconfig/*" usr/lib/$(DEB_HOST_MULTIARCH)/pkgconfig \
+ debian/tmp/usr/lib/lib*.so
+ dh_install
+
+override_dh_installman:
+ dh_installman
+ mkdir -p $(mandir)
+ $(HELP2MAN) --name='parallelised Zstandard compression, al la pigz' contrib/pzstd/pzstd >$(mandir)/pzstd.1
+
+override_dh_auto_test:
+ifeq ($(DEB_HOST_ARCH),hurd-i386)
+ make shortest
+else
+ dh_auto_test
+endif
--- /dev/null
+3.0 (quilt)
--- /dev/null
+Test-Command: zstd -b1 >/dev/null 2>&1
--- /dev/null
+version=4
+
+opts="repacksuffix=+dfsg,dversionmangle=s/\+dfsg\d*//g,repack,compression=xz" \
+ https://github.com/facebook/zstd/releases .*/archive/v?@ANY_VERSION@@ARCHIVE_EXT@
--- /dev/null
+NEWS
+README.md
--- /dev/null
+contrib/pzstd/pzstd usr/bin
+usr/bin
--- /dev/null
+zstd: binary-without-manpage usr/bin/zstdgrep
+zstd: binary-without-manpage usr/bin/zstdless
+zstd: binary-without-manpage usr/bin/zstdmt
+zstd: binary-without-manpage usr/bin/unzstd
+zstd: binary-without-manpage usr/bin/zstdcat
+zstd: manpage-has-errors-from-man
--- /dev/null
+programs/zstd*.1
projects / libzstd.git / commitdiff