sunxi: Enable LDO3 and LDO4 at 2.8V on OLinuxIno Lime boards

LDO3 and LDO4 are used to power port E resp. port G, which are exposed
on gpio headers, so enable them at 2.8V as specified in the schematic.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Gbp-Pq: Topic upstream/sunxi
Gbp-Pq: Name 0002-sunxi-Enable-LDO3-and-LDO4-at-2.8V-on-OLinuxIno-Lime.patch

diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index af96f5bd121554f101055e7e11c2aa3d4d919eaf..25b48d9cb5346cebd99ec8feb43692758c76dab2 100644 (file)
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -13,4 +13,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y

diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index b5181c6880ac6c911e58baf4ee7a8402e65efacf..4da7e1e3dfc47a5dc4bf6d7eb5aa3751a6022dec 100644 (file)
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -14,4 +14,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y

diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index e27698d0dd7df055b4c1439b218550d726f16ef8..151a0a3d3a73391548f29599b56a4eed2d26f37e 100644 (file)
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -12,4 +12,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y