[dgit import tarball u-boot 2016.03+dfsg1-6 u-boot_2016.03+dfsg1-6.debian.tar.xz]
--- /dev/null
+#!/bin/sh
+target=$1
+docs="$2"
+subarch_install_file="debian/build/targets.${target}"
+if [ -f "${subarch_install_file}" ]; then
+ cat "${subarch_install_file}"
+fi
+for doc in ${docs} ; do
+ echo ${doc} /usr/share/doc/u-boot-${target}/
+done
--- /dev/null
+#!/bin/sh
+
+target_file=debian/targets
+
+awk '/^[a-z0-9]/{print $2}' ${target_file} | sort -u | while read subarch ; do
+ case ${subarch} in
+ -) package=u-boot ;;
+ *) package=u-boot-${subarch} ;;
+ esac
+ overrides=debian/${package}.lintian-overrides
+
+ cat >${overrides}<<EOF
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+EOF
+
+ sed -n "/^[a-z0-9].*[[:space:]]$subarch[[:space:]]/p" ${target_file} | while read arch subarch2 platform targets ; do
+ echo "${package} [${arch}]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/${platform}/uboot.elf"
+ done >> ${overrides}
+
+ cat >>${overrides}<<EOF
+
+# These bootloaders need to be statically linked.
+EOF
+
+ sed -n "/^[a-z0-9].*[[:space:]]$subarch[[:space:]]/p" ${target_file} | while read arch subarch2 platform targets ; do
+ echo "${package} [${arch}]: statically-linked-binary usr/lib/u-boot/${platform}/uboot.elf"
+ done >> ${overrides}
+
+ cat >>${overrides}<<EOF
+
+${package}: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+${package}: spelling-error-in-copyright Synopsys Synopsis
+EOF
+done
+
+package=u-boot-tools
+cat >debian/${package}.lintian-overrides<<EOF
+# Synopsys is the name of a company, not a misspelling.
+${package}: spelling-error-in-copyright Synopsys Synopsis
+EOF
--- /dev/null
+#!/bin/sh
+for file in debian/build/platforms.* ; do
+ subarch=$(echo ${file} | sed -e 's,.*platforms.,,g')
+ case "${subarch}" in
+ -) package=u-boot ;;
+ *) package=u-boot-${subarch} ;;
+ esac
+ echo $(LC_ALL=C sort -u ${file}) | \
+ sed -e 's, ,${Newline},g' \
+ -e 's,^,uboot:platforms=${Newline}Included platforms:${Newline},g' \
+ >> debian/${package}.substvars
+done
--- /dev/null
+u-boot (2016.03+dfsg1-6) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * u-boot-tegra: Only install p2371-2180 symlink on arm64.
+ (Closes: #826905). Thanks to Martin Michlmayr for the report!
+ * Add patch to fix reproducibility issues with ld and some
+ locales. Thanks to HW42!
+
+ [ Martin Michlmayr ]
+ * Add NVIDIA to Tegra description
+ * u-boot-tegra.README.Debian: fix name of package
+ * u-boot-tegra.README.Debian: improve Jetson TK instructions.
+ (Closes: #827081).
+
+ [ Vagrant Cascadian ]
+ * Apply patch from upstream to fix volatages used on several OlinuXino
+ Lime board variants (Closes: #825214). Thanks to Karsten Merker for
+ tracking down the patch!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 28 Jun 2016 09:38:27 +0200
+
+u-boot (2016.03+dfsg1-5) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * Add patches from upstream to detect fdtfile on am57xx, and update
+ distro_bootcmd patch accordingly.
+ * u-boot-tools: Add fw_env.config for openrd (Closes: #821056). Thanks
+ to Rick Thomas.
+ * u-boot-omap: Add support for dra74_evm (Closes: #824730). Thanks to
+ Ben Hutchings.
+ * Added odroid-xu3 target, tested on Odroid-XU4.
+
+ [ Gerald Kerma ]
+ * Correct the guruplug.config to match the new upstream env address.
+ (Closes: #781873).
+
+ [ Vagrant Cascadian ]
+ * u-boot-exynos: Add patch to support distro_bootcmd on odroid target.
+
+ [ Martin Michlmayr ]
+ * u-boot-tegra: Add Jetson TX1 (P2371-2180) target (Closes: #825458).
+ * u-boot-tegra: Add arm64 arch.
+ * u-boot-tegra: Update README.Debian for Jetson TX1.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 29 May 2016 14:29:59 -0700
+
+u-boot (2016.03+dfsg1-4) unstable; urgency=medium
+
+ * Add patch to fix detected ram size on Firefly boards by reverting
+ "rockchip: rk3288: correct sdram setting".
+ * debian/control: Updated Standards-Version to 3.9.8, no changes needed.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 16 Apr 2016 15:33:22 -0700
+
+u-boot (2016.03+dfsg1-3) unstable; urgency=medium
+
+ * u-boot-omap:
+ - Remove ti-u-boot patches, which are no longer needed.
+ - Update am57xx support for distro bootcmd.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 04 Apr 2016 11:23:06 -0700
+
+u-boot (2016.03+dfsg1-2) unstable; urgency=medium
+
+ * Apply patch from upstream to fix gmac ethernet on sunxi
+ systems. (Closes: #818621). Thanks to Karsten Merker for the report.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 28 Mar 2016 19:52:45 -0700
+
+u-boot (2016.03+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release.
+ * Remove Firefly-RK3288 patch applied upstream.
+ * debian/control:
+ - Update to use https for Vcs-Git and Vcs-Browser.
+ - Update to Standards-Version 3.9.7, no changes needed.
+ * Update lintian overrides to ignore a company named Synopsys listed in
+ debian/copyright, which is flagged as a misspelling.
+ * Add patches to fix mispellings for "comment", "supported" and
+ "transferred".
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 15 Mar 2016 14:53:55 -0700
+
+u-boot (2016.03~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Add patch submitted upstream to fix Firefly-RK3288 SPL by disabling
+ eMMC feature in SPL.
+ * u-boot-sunxi: Drop FEL targets, as moderm versions of sunxi-tools
+ support loading u-boot-sunxi-with-spl.bin directly.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 08 Mar 2016 13:28:50 -0800
+
+u-boot (2016.03~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream.
+ * Refresh patches:
+ - Makefile-add-kwb-target-to-all.patch
+ - 0001-Makefile-Include-vendor-common-library-in-include-se.patch
+ - udoo_quad-support.patch
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 16 Feb 2016 15:01:48 -0800
+
+u-boot (2016.01+dfsg1-2) unstable; urgency=medium
+
+ * u-boot-omap:
+ - Include patches from ti-u-boot to support AM57xx boards.
+ - Add patch for AM57xx boards to boot using distro bootcmd.
+ - Add am57xx_evm target, used by the BeagleBoard-X15.
+ * Apply patches from upstream to fix OpenRD builds with
+ GCC-5. Thanks to Albert ARIBAUD. (Closes: #811129)
+ * u-boot-imx: Apply patch "wandboard: fix variable name so PXE boot
+ works" from upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 08 Feb 2016 20:14:04 -0800
+
+u-boot (2016.01+dfsg1-1) unstable; urgency=medium
+
+ * u-boot-sunxi: Enable orangepi_plus target.
+ * Remove patch Switching novena to config_distro_bootcmd, applied
+ upstream.
+ * armel: Enable openrd_base, openrd_client and openrd_ultimate
+ targets. Thanks to Albert ARIBAUD, Rick Thomas and Philip Hands for
+ testing. (Closes: #810790)
+ * Add Rick Thomas as a sheevaplug tester.
+ * sheevaplug: Update env documentation to default to current u-boot
+ offsets. (Closes: #781874)
+ * Bump versioned dependencies on debhelper and dpkg-dev to support use
+ of build profiles.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 12 Jan 2016 11:48:34 -0800
+
+u-boot (2016.01~rc3+dfsg1-3) experimental; urgency=medium
+
+ * u-boot-rockchip: Generate rksd images.
+ * u-boot-rockchip: Build u-boot-dtb.img instead of u-boot.img.
+ * Add u-boot-rpi package for Raspberry pi systems:
+ - [armel] Include rpi target.
+ - [armhf] Add rpi_2 target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 02 Jan 2016 15:19:11 -0800
+
+u-boot (2016.01~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ - Fixes eMMC boot selection on BeagleBone Black.
+ * Add patch to fix missing bootdelay on am335x.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 22 Dec 2015 18:20:52 -0800
+
+u-boot (2016.01~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate:
+ - Remove patches applied upstream.
+ - Refresh patches:
+ + arndale/board-spl-rule.diff
+ + beagleboneblack/usb-mass-storage.patch
+ + 0001-arm-novena-Switch-novena-to-config_distro_bootcmd.patch
+
+ * u-boot-tools:
+ - Install man page for kwboot.
+ - Add dumpimage command (Closes: #807174).
+ - strip mkenvimage.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 12 Dec 2015 19:00:32 -0800
+
+u-boot (2015.10+dfsg1-4) unstable; urgency=medium
+
+ * Fix reproducibility issue with targets listed in package descriptions
+ by always sorting using C locale.
+ * u-boot-imx: Updates to novena patches:
+ - Sync with submitted patch for distro_bootcmd support.
+ - Add upstream patch to fix USB support.
+ - Add upstream patch to enable loading u-boot.img from EXT
+ filesystems.
+ * Add upstream patches to fix mkimage support for multi and script
+ images (Closes: #805434).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 08 Dec 2015 08:59:47 -0800
+
+u-boot (2015.10+dfsg1-3) unstable; urgency=medium
+
+ * u-boot-install-targets: Add support to install documentation.
+ * u-boot-exynos: Install README.odroid.
+ * u-boot-rockchip: Install README.rockchip.
+ * u-boot-omap: Install README.nokia_rx51.
+ * Add included platforms to u-boot package descriptions.
+ * u-boot-sunxi: Enable the A10s-OLinuXino-M target. Thanks to Benedikt
+ Wildenhain (Closes: #806151).
+ * u-boot-imx: Add novena patches to include fdtfile variable, and load
+ fdt file into correct address.
+ * u-boot-sunxi: Backport patches from upstream to enable the Lamobo_R1
+ target.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 24 Nov 2015 14:14:29 -0800
+
+u-boot (2015.10+dfsg1-2) unstable; urgency=medium
+
+ * Add missing content to u-boot-rockchip package.
+ * Update wandboard and mx6cuboxi patches to use config_distro_bootcmd
+ patches from u-boot-imx.
+ * Patch mx6cuboxi to specify the baudrate in the console setting.
+ * Update BeagleBone Black patches to use config_distro_bootcmd from
+ upstream.
+ * Patch to switch novena to use distro_bootcmd.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 14 Nov 2015 09:22:47 -0600
+
+u-boot (2015.10+dfsg1-2~exp1) experimental; urgency=medium
+
+ * Build rockchip package, with firefly-rk3288 as the initial
+ target. Thanks to Emilio Pozuelo Monfort and Sjoerd Simons.
+ (Closes: #803166).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 02 Nov 2015 07:59:36 -0800
+
+u-boot (2015.10+dfsg1-1) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * New upstream version.
+ * Remove patch to fix variation caused by timezone differences, applied
+ upstream.
+ * Add patch to use a relative path to include the sunxi spl header,
+ which allows mksunxiboot to build on any architecture. Thanks to Ian
+ Campbell for the initial patch!
+ * Add patch from upstream to fix non-Android booting with ramdisk and/or
+ device tree.
+
+ [ Karsten Merker ]
+ * u-boot-sunxi: Enable the A20-Olimex-SOM-EVB target (Closes: #803335).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 29 Oct 2015 13:35:23 -0700
+
+u-boot (2015.10~rc4+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release candidate.
+ * Updated udoo patches and debian/targets, upstream switched to a single
+ target that supports both udoo quad and dual.
+ * u-boot-sunxi: Add Linksprite_pcDuino target (Closes: #799035). Thanks
+ to Robert Hegner for testing!
+ * Refreshed patches for beaglebone black.
+ * Add patch to fix build variation based on timezone, by removing call
+ to "mktime".
+ * debian/copyright: Updated new locations for exynos files.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 30 Sep 2015 12:00:30 -0700
+
+u-boot (2015.10~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Install mkenvimage. Patch from Ubuntu.
+ * Refreshed patches for arndale, beaglebone black, and mx53loco.
+ * Remove reproducibility patch, applied upstream.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 01 Sep 2015 17:10:40 -0500
+
+u-boot (2015.07+dfsg1-1) unstable; urgency=medium
+
+ [ Jochen Sprickerhof ]
+ * u-boot-sunxi: enable Mini-X target (Closes: #787266).
+
+ [ Ian Campbell ]
+ * Add support for Tegra Jetson TK-1 (Closes: #788689)
+
+ [ Vagrant Cascadian ]
+ New upstream version:
+ * mx6cuboxi:
+ - Remove patches applied upstream.
+ - Refresh distro bootcmd patch.
+ * wandboard:
+ - Remove wandboard SPL patch, applied upstream.
+ - Refresh distro bootcmd patch.
+ * beagleboneblack:
+ - Refresh distro bootcmd patch.
+ * udoo_quad:
+ - Refresh support patch.
+ * Drop no-error-on-set-but-unused-variable patch, no longer relevent.
+ * Add patch to ensure that CONFIG_SANDBOX is set when running "make env".
+
+ * Use patch applied upstream to use SOURCE_DATE_EPOCH when set.
+ * debian/rules: Use the Date from debian/changelog to set
+ SOURCE_DATE_EPOCH.
+
+ * Add example fw_env.config for mx6cuboxi (Closes: #786877).
+ * Add example fw_env.config for wandboard.
+
+ * Add Build-Depends on dpkg-dev (>= 1.17.0), as debian/rules uses
+ "dpkg-parsechangelog --show-field" introduced in that
+ version. (Closes: #768099).
+
+ * debian/watch: Update to use ftp server.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 01 Aug 2015 07:29:07 -0700
+
+u-boot (2015.04+dfsg1-2) unstable; urgency=medium
+
+ [ Joost van Zwieten ]
+ * u-boot-exynos: Enable odroid target.
+
+ [ Vagrant Cascadian ]
+ * u-boot-imx/mx6cuboxi:
+ + Add patches to enable HDMI and USB support.
+ + Add patches to fix Ethernet PHY detection.
+ * u-boot-imx/wandboard: Add patch from u-boot-imx to build a single SPL
+ target for all variants.
+
+ [ Robert Nelson ]
+ * u-boot-omap: Include u-boot.img instead of u-boot.bin for igep0020,
+ omap3_beagle and omap4_panda.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 25 May 2015 20:36:37 -0700
+
+u-boot (2015.04+dfsg1-1) experimental; urgency=medium
+
+ [ Ian Campbell ]
+ * u-boot-exynos: Fix conflict between arndale and sunxi spl
+ targets.
+ * u-boot-sunxi: Update sunxi FEL target.
+
+ [ Vagrant Cascadian ]
+ * u-boot-imx:
+ + Add usbarmory target.
+ + Add novena target.
+ + Add patches from u-boot-imx to support Cubox-i and Hummingboard and
+ drop old cubox-i patches.
+ + Add mx6cuboxi target.
+ + mx6cuboxi: Add patch to use config_distro_bootcmd.
+ + wandboard: Add patch to use config_distro_bootcmd and remove old
+ environment patches.
+
+ * u-boot-omap:
+ + am335x_boneblack: Remove patch to set voltage.
+ + am335x_boneblack: Add patch to use config_distro_bootcmd and remove
+ old patches.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 27 Apr 2015 14:54:44 -0700
+
+u-boot (2015.04~rc5+dfsg1-1) experimental; urgency=medium
+
+ [ John Paul Adrian Glaubitz ]
+ * [sh4] Fix FTBFS due to incorrect target names (Closes: #780066).
+
+ [ Vagrant Cascadian ]
+ * [armel] Use "rpi" for the Raspberry pi target, as it was renamed
+ upstream.
+ * [armel] Remove openrd_ultimate target, which fails to build upstream.
+ * [armel] Remove obsolete mmc guruplug and openrd patches.
+ * [armhf] Remove arndale patches, applied upstream.
+ * Fix cross-building of u-boot-tools (Closes: #775614).
+ * [armhf] u-boot-sunxi: Enable A20-OLinuXino_MICRO. Thanks to Arne
+ Ploese for testing!
+ * [armhf] u-boot-sunxi: Enable Linksprite_pcDuino3. Thanks to Patrice Go
+ for testing!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 07 Apr 2015 13:58:39 -0700
+
+u-boot (2015.04~rc3+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream:
+ - ti_armv7_common-support_raw_initrd.diff
+ * Refresh patches:
+ - cubox-i/cubox-i-support.diff
+ - mipsel-native-endianness.diff
+ - mx53loco
+ - openrd-mmc.diff
+ - series
+ - wandboard/wandboard-uEnv.txt-bootz-n-fixes.patch
+ - guruplug_mvfs_and_mmc.diff
+ * Add patch to enable USB mass-storage support for the BeagleBone Black:
+ - beagleboneblack/usb-mass-storage.patch
+ * debian/rules: Add get-orig-source target.
+
+ * Disable patches that fail to apply:
+ - cubox-i/imx6-spl-support.diff
+ - arndale/exynos-Enable-config_distro_defaults.h.patch
+ - arndale/exynos5-Use-config_distro_bootcmd.h.patch
+ * Disable cubox-i build target and patches, as it fails to build.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 08 Mar 2015 12:15:59 -0700
+
+u-boot (2014.10+dfsg1-5) unstable; urgency=medium
+
+ [ John Paul Adrian Glaubitz ]
+ * [sh4] Fix FTBFS due to incorrect target names (Closes: #780066).
+
+ [ Vagrant Cascadian ]
+ * [armhf] u-boot-sunxi: Enable A20-OLinuXino_MICRO. Thanks to Arne
+ Ploese for testing!
+ * [armhf] u-boot-sunxi: Enable Linksprite_pcDuino3. Thanks to Patrice Go
+ for testing!
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 07 Apr 2015 13:42:30 -0700
+
+u-boot (2014.10+dfsg1-4) unstable; urgency=medium
+
+ [ Karsten Merker ]
+ * Backport support for the LeMaker Banana Pro board (Closes: #779908).
+
+ [ Vagrant Cascadian ]
+ * Update lintian rules for BananaPro and A20-OlinuXino-LIME2.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 08 Mar 2015 11:13:07 -0700
+
+u-boot (2014.10+dfsg1-3) unstable; urgency=medium
+
+ * cubox-i-support.diff: Refresh patch, dropping solidrun.bmp, which
+ causes FTBFS with newer version of patch (Closes: #777518).
+
+ * Add patch to support A20-OLinuXino-LIME2, backported from u-boot
+ 2015.01. Thanks to Karsten Merker for the patch (Closes: #777466).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 21 Feb 2015 13:13:31 -0800
+
+u-boot (2014.10+dfsg1-2.1) unstable; urgency=medium
+
+ * Non-maintainer upload.
+ * debian/patches:
+ - Add sh4-fix-linker-name-prefix.patch to use the proper
+ linker name prefix on sh4. Fixes FTBFS. (Closes: #771747)
+
+ -- John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Thu, 11 Dec 2014 00:00:08 +0100
+
+u-boot (2014.10+dfsg1-2) unstable; urgency=medium
+
+ [ Steve Langasek ]
+ * Resync cubox-i patches with github.
+ - fixes support for booting on the cubox-i2ultra/i2ex.
+ (Closes: #766266)
+
+ [ Vagrant Cascadian ]
+ * wandboard, cubox-i: Add patches to use variables expected by
+ debian-installer bootscript.
+ * cubox-i: Move importing bootenv before loading the boot script, to
+ allow environment variables useful to the boot script to be set.
+ * cubox-i: Run autodetectfdt before attempting to load the boot script.
+ * Split README.Debian by subarchitecture, and document installing u-boot
+ on several additional boards.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 01 Nov 2014 16:33:33 -0700
+
+u-boot (2014.10+dfsg1-1) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * New upstream release.
+ * Refresh cubox-i patches to 2014.10.
+ * Update cubox-i patches to use generic board.
+ * Remove debian/patches/kerma-sheevaplug-mvsata.diff, merged upstream.
+ * Patch to allow tools-only to build without a configuration.
+ * Update Standards-Version to 3.9.6, no changes needed.
+
+ [ Ian Campbell ]
+ * Rebase arndale patches onto 2014.10
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 19 Oct 2014 11:34:39 -0700
+
+u-boot (2014.10~rc3+dfsg1-2) experimental; urgency=medium
+
+ [ Ian Campbell ]
+ * Add support for the Arndale board (Closes: #763186).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 09 Oct 2014 11:41:31 -0700
+
+u-boot (2014.10~rc3+dfsg1-1) unstable; urgency=medium
+
+ * New upstream release candidate.
+ * Remove patches applied upstream:
+ - bootcmd-scsi-scan-before-scsi.patch
+ - sunxi/0001-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch
+ * Refresh patches:
+ - am335x-bootscript.diff
+ - am335x-uenv.txt.diff
+ - cubox-i/cubox-i-support.diff
+ - no-force-CROSS_COMPILE-powerpc.diff
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 08 Oct 2014 09:57:35 -0700
+
+u-boot (2014.10~rc2+dfsg1-2) unstable; urgency=medium
+
+ [ Héctor Orón Martínez ]
+ * Fix cross building.
+ * Build extra tools for kirkwood and sunxi (Closes: #750108).
+ * Build extra tools and env just once, and install in PATH again.
+ * Add nitrogen6q support to u-boot-imx.
+
+ [ Vagrant Cascadian ]
+ * Use "make all" instead of making individual targets, recording a list
+ of targets to install in each subarch package.
+ * Build FEL variants for all sunxi platforms, based on patches from Ian
+ Campbell.
+ * Add build-depends on "bc".
+ * Patch to add the debian revision to the U-boot version.
+ * Updated cubox-i patches and re-enable mx6_cubox-i target.
+ * Build tools and env with NO_SDL=1 to avoid complaining about missing
+ sdl-config.
+ * Remove mips target dbau1100, an old platform with no testers.
+ * Swich qemu_mips target to install u-boot.bin, which is what is
+ actually needed by qemu.
+ * Add patch to Set DCDC1 DDR3 to 1.35V for Beaglebone Black. Thanks to
+ Robert Nelson for the patch.
+
+ [ Ian Campbell ]
+ * Add patch to add u-boot.kwb to "make all" on Kirkwood platforms.
+ * Build tools out-of-tree too so as not to dirty the source used for the
+ actual platforms (Closes: #763024).
+ * Add patch to initialize scsi before trying scsi disks in
+ config_distro_bootcmd (Closes: #764069).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 06 Oct 2014 16:58:04 -0700
+
+u-boot (2014.10~rc2+dfsg1-2~exp1) experimental; urgency=medium
+
+ * Split u-boot package into u-boot-imx, u-boot-omap and u-boot-sunxi
+ packages on armhf.
+
+ * debian/targets:
+ - Enable A10-OLinuXino-Lime target.
+ - Enable Cubieboard2 and Cubieboard2_FEL targets (Closes: #762383).
+ - Enable A20-OLinuXino-LIME target.
+ - Disable mx6_cubox-i
+ - Disable efikamx and efikasb.
+
+ * debian/patches:
+ - Add patch from upstream to support A20-OLinuXino-LIME.
+ - Disable patches for cubox-i.
+
+ * debian/rules:
+ - Remove excess conditional architecture check, drop build-dep on
+ dctrl-tools.
+ - Remove executable bit from u-boot targets.
+
+ * Updated lintian overrides.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 22 Sep 2014 18:30:12 -0500
+
+u-boot (2014.10~rc2+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+
+ * Update debian/patches:
+ - Remove Cubieboard and Cubietruck patches, applied upstream.
+ - Remove kerma-sheevaplug-mvsdio patch, applied upstream.
+ - Update openrd-mmc patch, partially applied upstream.
+ - Add patch to workaround failure when building env tools.
+
+ * [armhf] Add Bananapi target.
+
+ * debian/rules:
+ - Install fw_printenv and fw_setenv symlink in platform-specific dir.
+ - Create include/config/auto.conf to allow tools-only target to build.
+ - Update to use defconfig target rather than config target.
+
+ * debian/copyright:
+ - Update Files-Excluded as some files were removed upstream.
+
+ * Updated lintian overrides.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 03 Sep 2014 23:28:59 -0700
+
+u-boot (2014.07+dfsg1-2) unstable; urgency=medium
+
+ [ Steve Langasek ]
+ * Rebase cubox-i patches on 2014.07 and re-enable the target.
+
+ [ Vagrant Cascadian ]
+ * Switch to debhelper 9 with executable .install files.
+ * Remove the efikamx and efikasb targets.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 14 Sep 2014 23:01:50 -0500
+
+u-boot (2014.07+dfsg1-1) unstable; urgency=medium
+
+ * New upstream version.
+ * [armhf] Temporarily disable cubox-i target, which needs re-working for
+ new upstream version.
+ * Refresh Cubietruck and Cubieboard patches.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Thu, 28 Aug 2014 12:22:06 -0700
+
+u-boot (2014.07~rc4+dfsg1-1) experimental; urgency=medium
+
+ * New upstream release candidate.
+ * Updated patches for sheevaplug MMC and SATA support.
+ * Updated openrd patches to use MMC driver.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sat, 12 Jul 2014 17:24:51 -0700
+
+u-boot (2014.04+dfsg1-3) unstable; urgency=medium
+
+ * Add patch for mx53loco that enables support for ext4, the "load" command,
+ and using bootz with raw initrds.
+ * Remove ZUMA platform and drop powerpc from u-boot architectures
+ (Closes: #754610).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 28 Jul 2014 15:30:26 -0700
+
+u-boot (2014.04+dfsg1-2) unstable; urgency=medium
+
+ * Enable udoo_quad target, with patch improving the udoo_quad boot
+ environment. Thanks to Michael Fladischer! (Closes: #753376).
+ * Enable Cubieboard target and patches.
+ * Update lintian overrides.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Wed, 09 Jul 2014 12:37:12 -0700
+
+u-boot (2014.04+dfsg1-1) unstable; urgency=medium
+
+ [ Vagrant Cascadian ]
+ * Repack upstream tarball to remove files containing firmware without
+ sources (Closes: #750912).
+
+ * Add patches for Cubietruck from upstream.
+ * Add Cubietruck and Cubietruck_FEL targets (Closes: #750473).
+
+ * Add support for bootscripts to BeagleBone Black.
+ - Support loading files from either first or second partition.
+
+ * Modified wandboard patches:
+ - Add support for bootscripts.
+ - Support both fat and ext filesystems by consistantly using the "load"
+ command.
+ - Try loading bootscript from /boot/ as a fallback if not found in /.
+
+ * Update debian/copyright to use copyright format 1.0.
+ - Document which files are removed in debian/copyright.
+ * Update debian/watch to handle +dfsg version.
+ * Update lintian overrides:
+ - Ignore 'u-boot: statically-linked-binary'.
+ - Include new u-boot targets.
+
+ [ Andreas Henriksson ]
+ * Add patches for sunxi AHCI driver (Cubietruck) (Closes: #750473).
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 15 Jun 2014 21:03:40 -0700
+
+u-boot (2014.04-2) unstable; urgency=medium
+
+ * Fix FTBFS on powerpc by not setting CROSS_COMPILE when empty.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 26 May 2014 11:32:49 -0700
+
+u-boot (2014.04-1) unstable; urgency=low
+
+ [ Steve Langasek ]
+ * Patches taken from https://github.com/rabeeh/u-boot-imx6.git to support
+ the SolidRun CuBox-i series:
+ - debian/patches/spl-sata-support.diff:
+ Add support for SATA in SPL mode
+ - debian/patches/imx6-spl-support.diff:
+ Add support for SPL on i.MX6-based systems
+ - debian/patches/cubox-support.diff, tools/logos/solidrun.bmp:
+ Add support for the CuBox-i.
+ * Build the mx6_cubox-i target (Closes: #741127).
+
+ [ Vagrant Cascadian ]
+ * Add Nokia nokia_rx51 (n900) to targets to build.
+ - Patch n900 build to support bootz and raw initrds.
+ * debian/rules: Fix building of targets for v2014.04.
+ - Move fw_printenv creation into board-specific targets.
+ - Build target "tools-only".
+ - Drop special-casing of MLO, add MLO to debian/targets.
+ * debian/patches/cubox-i-raw-initrd.diff:
+ - Patch to support raw initrd on cubox-i.
+ * debian/watch: Use http.
+ * debian/control: Bump Standards-Version to 3.9.5, no changes needed.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 20 May 2014 10:04:56 -0700
+
+u-boot (2014.01-2) unstable; urgency=medium
+
+ * Set Maintainer to Vagrant Cascadian (Closes: #738446).
+ * Remove Micah Anderson from uploaders.
+ * Add Clint Adams <clint@debian.org> to uploaders.
+ * Use grep-dctrl to pull architecture list from debian/control, rather than
+ hardcoding architectures in debian/rules.
+ * u-boot-tools: Set architecture to linux-any (Closes: #730833).
+ * Build raspberry pi (rpi_b) image on armel.
+ - Patch to to enable EXT2/EXT4 support and raw initrds.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 04 Mar 2014 14:13:22 -0800
+
+u-boot (2014.01-1) unstable; urgency=low
+
+ * New upstream version.
+ * Updated patches.
+ * debian/watch: Update to catch -rc versions.
+ * debian/control: Update Vcs-* headers.
+ * u-boot-tools: Strip comment sections from mkimage and fw_printenv.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Tue, 11 Feb 2014 15:11:47 -0800
+
+u-boot (2013.10-3) unstable; urgency=low
+
+ * Move build of dbau1100 from mipsel to mips, which fixes FTBFS on mipsel,
+ due to dbau1100 being big-endian.
+ * Disable mipsel builds of u-boot, as it no longer has any targets.
+ * Add patch to specify default mmc partition to use when loading uEnv.txt
+ on BeagleBone Black.
+ * Add patch to support raw initrds on BeagleBone Black.
+ * Mark u-boot-tools as Multi-Arch: foreign.
+ * Mark u-boot as Multi-Arch: same.
+ * Update lintian overrides with list of current platforms.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 17 Nov 2013 00:09:32 -0800
+
+u-boot (2013.10-2) unstable; urgency=low
+
+ * debian/rules:
+ - Switch back to explicitly building the specified target.
+ - Allow building multiple targets per platform.
+ * debian/targets:
+ - Build the spl/u-boot-spl.bin target on several armhf platforms, which
+ generates the MLO file.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Mon, 21 Oct 2013 11:33:01 -0700
+
+u-boot (2013.10-1) unstable; urgency=low
+
+ * New upstream version (Closes: #667680, #726699).
+ - Update mipsel-native-endianness.diff
+ * debian/rules:
+ - Remove various tools/* files on clean target.
+ - Build each platform target and install MLO file if present.
+ (Closes: #687562).
+ - Support parallel builds using DEB_BUILD_OPTIONS=parallel=N.
+ * Enable BeagleBone Black and Wandboard platforms.
+ * Add patch to support uEnv.txt and directly loading zimage for Wandboard.
+ * Include env configs u-boot-tools examples (Closes: #631659, #636214).
+ * Only build u-boot on architectures which generate images (Closes: #635050).
+ * Drop i386 builds of u-boot, as the only target (eNET) was removed upstream.
+ * debian/control: Add myself to uploaders.
+
+ -- Vagrant Cascadian <vagrant@debian.org> Sun, 20 Oct 2013 10:23:55 -0700
+
+u-boot (2013.01.01-4) unstable; urgency=low
+
+ * Upload to unstable.
+ * Drop transitional packages uboot-envtools and uboot-mkimage.
+
+ -- Clint Adams <clint@debian.org> Thu, 09 May 2013 21:41:25 -0400
+
+u-boot (2013.01.01-3) experimental; urgency=low
+
+ * Disable unnecessary JFFS2 on GuruPlug
+ * Disable MMC on GuruPlug, devices are not detected,
+ they show up as USB devices instead
+
+ -- Micah Anderson <micah@debian.org> Mon, 25 Mar 2013 22:56:32 -0400
+
+u-boot (2013.01.01-2) experimental; urgency=low
+
+ * More properly enable MMC on GuruPlug.
+ * Use new Efika target names.
+ * Bump to Standards-Version 3.9.4.
+
+ -- Clint Adams <clint@debian.org> Sun, 24 Mar 2013 21:59:03 -0400
+
+u-boot (2013.01.01-1) experimental; urgency=low
+
+ * New upstream version. closes: #699232.
+ - Drop strip-env-tools.diff (merged).
+ - Update kerma-sheevaplug-mvsdio.diff.
+ - Update mipsel-native-endianness.diff
+ * Enable CONFIG_SYS_MVFS and CONFIG_CMD_MMC for GuruPlug.
+
+ -- Clint Adams <clint@debian.org> Thu, 21 Mar 2013 14:21:33 -0400
+
+u-boot (2012.04.01-2) unstable; urgency=low
+
+ * Remove code duplication in kerma-sheevaplug-mvsdio.diff.
+ closes: #674230.
+
+ -- Clint Adams <clint@debian.org> Thu, 31 May 2012 21:04:49 -0400
+
+u-boot (2012.04.01-1) unstable; urgency=low
+
+ * New upstream version.
+ - Update mipsel-native-endianness.diff.
+ - Update no-error-on-set-but-unused-variables.diff (partially merged).
+ - Drop kirkwood_spi-irq_mask.diff (merged).
+ - Drop kirkwood-disable-l2c.diff (merged).
+
+ -- Clint Adams <clint@debian.org> Tue, 01 May 2012 18:07:19 -0400
+
+u-boot (2011.12-3) unstable; urgency=low
+
+ [ Jonathan Nieder ]
+ * kirkwood: disable L2 cache before Linux boot; thanks to Ian Campbell.
+ closes: #658904
+
+ [ Loïc Minier ]
+ * Add patch to strip env tools; sent to upstream mailing-list.
+
+ -- Loïc Minier <lool@debian.org> Sun, 11 Mar 2012 16:12:50 +0100
+
+u-boot (2011.12-2) unstable; urgency=low
+
+ [ Loïc Minier ]
+ * Build u-boot.imx for efikasb on armhf
+
+ [ Clint Adams ]
+ * Patch from Ian Campbell to fix Dreamplug breakage. closes: #655102.
+
+ -- Clint Adams <clint@debian.org> Sun, 08 Jan 2012 15:11:03 -0500
+
+u-boot (2011.12-1) unstable; urgency=low
+
+ * New upstream version.
+ - Drop build-timestamp_autogenerated.h-without-config.patch (merged).
+ - Drop ublimage-NAND-block-size-isn-t-set-at-build-time.patch (merged).
+ - Update kerma-sheevaplug-mvsdio.diff
+ - Update mipsel-native-endianness.diff
+ - Drop dreamplug-v8.patch (merged).
+
+ -- Clint Adams <clint@debian.org> Mon, 02 Jan 2012 17:49:39 -0500
+
+u-boot (2011.09-2) unstable; urgency=low
+
+ * Patch from Pino Toscano <pino@debian.org> to build on the Hurd.
+ closes: #648295.
+ * Drop gr_xc3s_1500 target.
+ * Add build-arch and build-indep targets to debian/rules.
+
+ -- Clint Adams <clint@debian.org> Tue, 15 Nov 2011 23:53:01 -0500
+
+u-boot (2011.09-1) unstable; urgency=low
+
+ [ Hector Oron ]
+ * Enable MX53LOCO platform.
+ * Update lintian overrides.
+
+ [ Loïc Minier ]
+ * Fix FTBFS on amd64 and allow `make tools` to succeed without
+ config.
+
+ [ Clint Adams ]
+ * New upstream version.
+ - Update kerma-sheevaplug-mvsdio.diff.
+ - Drop panda-default-console.diff (refactored).
+ - Replace dreamplug patches with Jason's v8.
+ * Add Buffalo Linkstation Mini env config from Benjamin Cama.
+
+ -- Clint Adams <clint@debian.org> Fri, 30 Sep 2011 21:22:23 -0400
+
+u-boot (2011.06-4) unstable; urgency=low
+
+ * Increase the USB non-bulk timeout by an order of magnitude.
+ May fix #635774.
+
+ -- Clint Adams <clint@debian.org> Sat, 06 Aug 2011 13:42:52 -0400
+
+u-boot (2011.06-3) unstable; urgency=low
+
+ * Add DreamPlug support.
+
+ -- Clint Adams <clint@debian.org> Sun, 24 Jul 2011 09:35:32 -0400
+
+u-boot (2011.06-2) unstable; urgency=low
+
+ * Use -Wno-error=unused-but-set-variable on i386.
+
+ -- Clint Adams <clint@debian.org> Sat, 02 Jul 2011 22:14:44 -0400
+
+u-boot (2011.06-1) unstable; urgency=low
+
+ * New upstream version.
+ * Fix i386 and mipsel builds.
+
+ -- Clint Adams <clint@debian.org> Sat, 02 Jul 2011 19:25:28 -0400
+
+u-boot (2011.06~rc3-1) unstable; urgency=low
+
+ * New upstream version.
+
+ -- Clint Adams <clint@debian.org> Sat, 02 Jul 2011 15:50:46 -0400
+
+u-boot (2011.06~rc2-2) unstable; urgency=low
+
+ * Fix mipsel endianness problem again.
+ * Try building gr_xc3s_1500 on sparc.
+
+ -- Clint Adams <clint@debian.org> Sat, 18 Jun 2011 10:13:53 -0400
+
+u-boot (2011.06~rc2-1) unstable; urgency=low
+
+ * New upstream version.
+ * Fix tools config selection.
+
+ -- Clint Adams <clint@debian.org> Tue, 14 Jun 2011 20:53:07 -0400
+
+u-boot (2011.06~rc1-1) unstable; urgency=low
+
+ * New upstream version.
+ - Update mipsel-native-endianness.diff
+ - Drop Drop-config.h-include-in-tools-imximage.h.diff (merged).
+ - Drop openrd-client-and-ultimate.diff (merged).
+ - Update openrd-mmc.diff (formerly openrd-mmc-mtd-fat.diff).
+ - Drop eNET-monitor_flash_len.diff (merged).
+ - Update snapshot.commit to 2011.06-rc1.
+ - Use the first target for each arch to build the tools, or
+ fake it on the other architectures.
+ * Only build efikamx image on armhf.
+
+ -- Clint Adams <clint@debian.org> Sat, 21 May 2011 11:04:30 -0400
+
+u-boot (2011.03-6) unstable; urgency=low
+
+ * Bump to Standards-Version 3.9.2.
+ * Tweak the u-boot-tools description.
+ * Drop igep0020, omap3_beagle, and omap4_panda targets from
+ armel; they are available on armhf.
+
+ -- Clint Adams <clint@debian.org> Tue, 26 Apr 2011 16:11:24 -0400
+
+u-boot (2011.03-5) unstable; urgency=low
+
+ [ Sebastian Reichel ]
+ * Add Pandaboard target. closes: #624123
+ * New patch to change default console on Pandaboard.
+
+ -- Clint Adams <clint@debian.org> Mon, 25 Apr 2011 15:36:16 -0400
+
+u-boot (2011.03-4) unstable; urgency=low
+
+ * Enable FAT, SD/MMC, MTD, JFFS, UBIFS support on OpenRD boards.
+
+ -- Clint Adams <clint@debian.org> Wed, 13 Apr 2011 18:05:36 -0400
+
+u-boot (2011.03-3) unstable; urgency=low
+
+ * Actually pass the right arch_number for OpenRD-Ultimate.
+
+ -- Clint Adams <clint@debian.org> Tue, 12 Apr 2011 14:28:20 -0400
+
+u-boot (2011.03-2) unstable; urgency=low
+
+ * Fix i386 FTBFS with eNET-monitor_flash_len.diff
+ * Add patch for OpenRD-Client and OpenRD-Ultimate.
+ * Drop openrd_base target and add openrd_ultimate target.
+
+ -- Clint Adams <clint@debian.org> Tue, 05 Apr 2011 15:56:43 -0400
+
+u-boot (2011.03-1) unstable; urgency=low
+
+ [ Loïc Minier ]
+ * Only try to build env tools when Linux MTD headers are present.
+ closes: #619673.
+
+ [ Clint Adams ]
+ * New upstream version.
+ - Drop fix-definition-of-global_data-struct.diff (now upstream).
+ - Drop EfikaMX-switch-to-MACH_TYPE_MX51_EFIKAMX.diff (upstream now).
+ - Drop sh-sh7785lcr-Fix-out-of-tree-building.diff (upstream now).
+ - Drop MIPS-dbau1x00-Remove-unused-flash-driver-stub.diff (upstream now).
+ - Drop x86-Align-config.mk-and-linker-scripts-with-other-ar.diff
+ (upstream now).
+ - Update snapshot.commit to 2011.03
+
+ -- Clint Adams <clint@debian.org> Fri, 01 Apr 2011 10:30:46 -0400
+
+u-boot (2011.03~rc1-4) experimental; urgency=low
+
+ * Add patch x86-Align-config.mk-and-linker-scripts-with-other-ar.
+ From upstream mailing-list; fixes x86 build (eNET).
+
+ -- Loïc Minier <lool@debian.org> Wed, 09 Feb 2011 14:51:01 +0100
+
+u-boot (2011.03~rc1-3) experimental; urgency=low
+
+ * Add debian/source/local-options
+ - unapply-patches: avoids committing patched tree after a build
+ - abort-on-upstream-changes: avoids creating a debian-changes-* patch
+ when building from a dirty tree
+ * Add patch MIPS-dbau1x00-Remove-unused-flash-driver-stub,
+ from u-boot-mipsel.git 17a990b55008fd79636e4880d9d10b7172ca87ce and also
+ sent to the upstream mailing-list; fixes build of dbau1x00 board by
+ removing board/dbau1x00/flash.c entirely, and hence fixes the build of
+ u-boot on mipsel.
+
+ -- Loïc Minier <lool@debian.org> Tue, 08 Feb 2011 16:49:05 +0100
+
+u-boot (2011.03~rc1-2) experimental; urgency=low
+
+ * New patch sh-sh7785lcr-Fix-out-of-tree-building; from upstream
+ e72f46787f44c1104a8df18511ab230b6072a1f0; fixes Debian sh4 build; thanks
+ Nobuhiro Iwamatsu; closes: #611873.
+
+ -- Loïc Minier <lool@debian.org> Mon, 07 Feb 2011 17:20:16 +0100
+
+u-boot (2011.03~rc1-1) experimental; urgency=low
+
+ * dpkg-shlibdeps usr/bin/* rather than just mkimage.
+ * uboot-mkimage's Section is utils.
+ * Allow overriding CROSS_COMPILE.
+ * New upstream release candidate.
+ - Merge commit v2011.03-rc1
+ - Update snapshot.commit to 2011.03-rc1
+ * Add EfikaMX support.
+ - Add patch EfikaMX-switch-to-MACH_TYPE_MX51_EFIKAMX from the upstream
+ mailing-list; fixes build on EfikaMX (EfikaMX: switch to
+ MACH_TYPE_MX51_EFIKAMX)
+ - Add patch Drop-config.h-include-in-tools-imximage.h from the upstream
+ mailing-list; fixes tools-all build of imximage.c.
+ - Build u-boot.imx for efikamx on armel.
+ * Refresh patch kerma-sheevaplug-mvsdio to fix fuzz.
+
+ -- Loïc Minier <lool@debian.org> Thu, 03 Feb 2011 13:13:14 +0100
+
+u-boot (2010.12-2) unstable; urgency=low
+
+ * Avoid calling dpkg-architecture if DEB_HOST_ARCH is set.
+ * Misc refactoring of debian/rules.
+ - Split per architecture list of platform and targets into
+ debian/targets.
+ - Actually use INSTALL_FILE/INSTALL_DIR/INSTALL_PROGRAM.
+ - Add support for cross-builds; these will currently lack tools.
+ - Build board-specific u-boot files in a separate build dir from the
+ generic tools
+ * Fix handling of -Wl,foo LDFLAGS; the upstream build passes LDFLAGS
+ directly to ld instead of calling gcc for linking; so instead of passing
+ -Wl,foo in LDFLAGS as in automake builds, one should set LDFLAGS to foo
+ directly; add a snippet to strip -Wl, from LDFLAGS; alternatively, we
+ could do as in other special packages like the kernel and simply unset
+ LDFLAGS entirely; closes: #607613.
+ * Install and compress upstream mkimage manpage; based on a patch by
+ Marcin Juszkiewicz.
+ * Add a dummy uboot-mkimage package for upgrades from squeeze; based on a
+ patch by Marcin Juszkiewicz; closes: #607618.
+ * Add new patch, fix-definition-of-global_data-struct, from the upstream
+ x86 maintainer; fixes build of eNET board which breaks u-boot's build on
+ i386; closes: #608801.
+ * Workaround an upstream bug in distclean by removing include/asm/proc and
+ /arch explicitly for now; patch was sent upstream.
+ * Don't repeat Section: in binary package.
+ * Add myself to Uploaders.
+ * Split tools in u-boot-tools package.
+ * Drop board-specific tools; these are too dangerous; only ship mkimage for
+ now.
+ * Add igep0020 and omap3_beagle builds on armel
+ * Update snapshot.commit to the 2010.12 release contents; this avoids a
+ pointless diff with the tarball.
+
+ -- Loïc Minier <lool@debian.org> Mon, 17 Jan 2011 22:43:41 +0100
+
+u-boot (2010.12-1) unstable; urgency=low
+
+ * New upstream version.
+ * Install more tools in preparation for splitting off a
+ u-boot-tools binary package.
+
+ -- Clint Adams <clint@gnu.org> Tue, 28 Dec 2010 17:03:44 -0500
+
+u-boot (2010.12~rc3-1) unstable; urgency=low
+
+ * New upstream release candidate.
+ * Add dockstar target.
+
+ -- Clint Adams <clint@gnu.org> Sun, 19 Dec 2010 09:45:42 -0500
+
+u-boot (2010.12~rc2-1) unstable; urgency=low
+
+ * New upstream release candidate.
+ * Add openrd_base target.
+
+ -- Clint Adams <clint@gnu.org> Sat, 04 Dec 2010 15:32:38 -0500
+
+u-boot (2010.09-2) unstable; urgency=low
+
+ * Enable ext2 commands on GuruPlug.
+ * Ship ELF files (for loading into RAM with OpenOCD).
+
+ -- Clint Adams <clint@gnu.org> Sat, 20 Nov 2010 18:20:40 -0500
+
+u-boot (2010.09-1) unstable; urgency=low
+
+ * New upstream release.
+
+ -- Clint Adams <schizo@debian.org> Wed, 29 Sep 2010 00:06:25 -0400
+
+u-boot (2010.09~rc2-1) unstable; urgency=low
+
+ * New upstrem release candidate.
+
+ -- Clint Adams <schizo@debian.org> Sun, 19 Sep 2010 14:20:52 -0400
+
+u-boot (2010.09~rc1-2) unstable; urgency=low
+
+ * Add patch from Gérald Kerma to add Sheevaplug mvsata support.
+ * Add patch from Gérald Kerma to add Sheevaplug mvsdio support.
+
+ -- Clint Adams <schizo@debian.org> Sun, 12 Sep 2010 11:48:22 -0400
+
+u-boot (2010.09~rc1-1) unstable; urgency=low
+
+ * New upstream release candidate.
+ - Drop guruplug-miiphy_reset.diff.
+ - Update mipsel-native-endianness.diff.
+ - Drop sh4-native-compile.diff.
+ * Bump to Standards-Version 3.9.1.
+
+ -- Clint Adams <schizo@debian.org> Sat, 11 Sep 2010 00:43:04 -0400
+
+u-boot (2010.06-1) unstable; urgency=low
+
+ * New upstream version.
+
+ -- Clint Adams <schizo@debian.org> Sat, 03 Jul 2010 13:49:46 -0400
+
+u-boot (2010.06~rc3-1) unstable; urgency=low
+
+ * New upstream version.
+ * Fix sh4-native-compile.diff to not break sh64, thanks to Paul
+ Mundt.
+ * Ship mkimage, conflict/replace uboot-mkimage, build on all
+ architectures.
+
+ -- Clint Adams <schizo@debian.org> Fri, 25 Jun 2010 14:49:06 -0400
+
+u-boot (2010.06~rc2-1) unstable; urgency=medium
+
+ * Add sh4-native-compile.diff from Aurelien Jarno. closes: #586026.
+ * New upstream version.
+ - Drop marvell-machtypes.diff.
+
+ -- Clint Adams <schizo@debian.org> Tue, 15 Jun 2010 21:37:26 -0400
+
+u-boot (2010.06~rc1-6) unstable; urgency=medium
+
+ * Add guruplug-miiphy_reset.diff.
+ * Clean between targets. closes: #585570.
+
+ -- Clint Adams <schizo@debian.org> Fri, 11 Jun 2010 21:57:31 -0400
+
+u-boot (2010.06~rc1-5) unstable; urgency=low
+
+ * Replace mipsel-native-endianness.diff with patch adapted
+ from a 2008 mailing list posting by Shinya Kuribayashi.
+
+ -- Clint Adams <schizo@debian.org> Fri, 04 Jun 2010 20:08:27 -0400
+
+u-boot (2010.06~rc1-4) unstable; urgency=low
+
+ * Add r2dplus target for sh4.
+ * mipsel-native-endianness.diff: don't force endianness on mips/mipsel
+
+ -- Clint Adams <schizo@debian.org> Thu, 03 Jun 2010 19:32:50 -0400
+
+u-boot (2010.06~rc1-3) unstable; urgency=low
+
+ * Fix mipsel typo.
+ * Apply patch from Nobuhiro Iwamatsu to change sh4 target board
+ from espt to sh7785lcr_32bit. closes: #584192.
+
+ -- Clint Adams <schizo@debian.org> Wed, 02 Jun 2010 08:25:04 -0400
+
+u-boot (2010.06~rc1-2) unstable; urgency=low
+
+ * Produce u-boot.bin on i386.
+ * Switch mipsel target to AMD DBAu1100.
+ * Add marvell-machtypes.diff.
+
+ -- Clint Adams <schizo@debian.org> Mon, 31 May 2010 22:09:29 -0400
+
+u-boot (2010.06~rc1-1) unstable; urgency=low
+
+ * Add Vcs-Git and Vcs-Browser headers.
+ * Add GuruPlug target (armel).
+ * Switch mipsel target to TB0229.
+ * Add watch file.
+ * Update README.Debian for SheevaPlug and GuruPlug.
+
+ -- Clint Adams <schizo@debian.org> Mon, 31 May 2010 19:29:40 -0400
+
+u-boot (2010.03-1) unstable; urgency=low
+
+ * Initial packaging. closes: #583605.
+
+ -- Clint Adams <schizo@debian.org> Fri, 28 May 2010 16:20:39 -0400
--- /dev/null
+9
\ No newline at end of file
--- /dev/null
+Source: u-boot
+Section: admin
+Priority: optional
+Maintainer: Vagrant Cascadian <vagrant@debian.org>
+Uploaders: Loïc Minier <lool@debian.org>, Clint Adams <clint@debian.org>
+Build-Depends: debhelper (>= 9.20141010), bc, device-tree-compiler, dpkg-dev (>= 1.17.14), u-boot-tools (>= 2015.10) [armhf] <cross>
+Standards-Version: 3.9.8
+Homepage: http://www.denx.de/wiki/U-Boot/
+Vcs-Git: https://anonscm.debian.org/git/collab-maint/u-boot.git
+Vcs-Browser: https://anonscm.debian.org/cgit/collab-maint/u-boot.git/
+
+Package: u-boot
+Architecture: armel armhf avr32 mips sh4
+Multi-Arch: same
+Depends: ${misc:Depends},
+ u-boot-imx [armhf], u-boot-omap [armhf], u-boot-sunxi [armhf], u-boot-exynos [armhf]
+Description: A boot loader for embedded systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ ${uboot:platforms}
+
+Package: u-boot-imx
+Architecture: armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Breaks: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Replaces: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Description: A boot loader for imx systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various imx platforms.
+ ${uboot:platforms}
+
+Package: u-boot-tegra
+Architecture: armhf arm64
+Multi-Arch: same
+Depends: ${misc:Depends}
+Breaks: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Replaces: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Description: A boot loader for NVIDIA Tegra systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various NVIDIA Tegra platforms.
+ ${uboot:platforms}
+
+Package: u-boot-omap
+Architecture: armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Breaks: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Replaces: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Description: A boot loader for omap systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various omap and related
+ platforms.
+ ${uboot:platforms}
+
+Package: u-boot-sunxi
+Architecture: armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Breaks: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Replaces: u-boot (<< 2014.10~rc2+dfsg1-2~)
+Description: A boot loader for sunxi systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Allwinner/sunxi
+ platforms.
+ ${uboot:platforms}
+
+Package: u-boot-exynos
+Architecture: armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for exynos systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Exynos platforms.
+ ${uboot:platforms}
+
+Package: u-boot-rockchip
+Architecture: armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for rockchip systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Rockchip platforms.
+ ${uboot:platforms}
+
+Package: u-boot-rpi
+Architecture: armel armhf
+Multi-Arch: same
+Depends: ${misc:Depends}
+Description: A boot loader for Raspberry PI systems
+ Das U-Boot is a cross-platform bootloader for embedded systems,
+ used as the default boot loader by several board vendors. It is
+ intended to be easy to port and to debug, and runs on many
+ supported architectures, including PPC, ARM, MIPS, x86, m68k,
+ NIOS, and Microblaze.
+ .
+ This package includes boot loaders for various Raspberry PI
+ platforms.
+ ${uboot:platforms}
+
+Package: u-boot-tools
+Architecture: linux-any
+Multi-Arch: foreign
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Breaks: uboot-envtools (<< 20081215-3~),
+ uboot-mkimage (<= 0.4build1),
+ u-boot (<< 2010.12-2)
+Replaces: uboot-envtools (<< 20081215-3~),
+ uboot-mkimage (<= 0.4build1),
+ u-boot (<< 2010.12-2)
+Description: companion tools for Das U-Boot bootloader
+ This package includes the mkimage program, which allows generation of U-Boot
+ images in various formats, and the fw_printenv and fw_setenv programs to read
+ and modify U-Boot's environment.
--- /dev/null
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: Das U-Boot
+Source: ftp://ftp.denx.de/pub/u-boot/
+Files-Excluded: *fpgadata*
+ arch/powerpc/cpu/mpc8xx/upatch.c
+ drivers/dma/MCD_tasks.c
+
+Files: *
+Copyright: 2000-2013 Wolfgang Denk <wd@denx.de>
+ 1995-2002 Russell King
+ 1996-1998 Russell King
+ 1996-1999 Russell King
+ 1996-2000 Russell King
+ 1996 Russell King
+ 1997-1999 Russell King
+ 1999-2002 Vojtech Pavlik
+ 1999 Linus Torvalds / 2000-2002 Transmeta Corporation
+ 1999 Russell King
+ 2000-2002 Russell King
+ 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ 2001, 2002, 2003 / 2004 Gary Jennejohn garyj@denx.de
+ 2002-2007 Aleph One Ltd
+ 2002-2011 Aleph One Ltd
+ 2002 Thomas Gleixner (tglx@linutronix.de)
+ 2003 Kai-Uwe Bloem / 2000-2002 Transmeta Corporation / 1999 Linus Torvalds
+ 2004 by David Brownell
+ 2004 Nokia Corporation
+ 2004 Thomas Gleixner (tglx@linutronix.de)
+ 2005-2006 by Texas Instruments
+ 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation / 2006-2007 Nokia Corporation
+ 2005-2007 Samsung Electronics
+ 2005-2007 Samsung Electronics / Samsung Electronics, 2009 / Nokia Corporation, 2007
+ 2005-2008 Samsung Electronics
+ 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2006-2007 Nokia Corporation
+ 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2008-2009 MontaVista Software, Inc. <source@mvista.com> / 2006-2007 Nokia Corporation
+ 2005, Seagate Technology LLC / 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ 2006-2007 Nokia Corporation / 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation
+ 2006-2007 Nokia Corporation / 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments
+ 2006-2007 Nokia Corporation / 2005 Mentor Graphics Corporation / 2005-2006 by Texas Instruments / 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ 2006, 2007 University of Szeged, Hungary / 2006-2008 Nokia Corporation
+ 2006-2008 Nokia Corporation
+ 2006,2009 Freescale Semiconductor, Inc
+ 2006-2009 Solarflare Communications Inc
+ 2006 Freescale Semiconductor, Inc
+ 2006 Nokia Corporation / 2005-2007 by Texas Instruments
+ 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> / 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> / 2009 Ilya Yanok, <yanok@emcraft.com>
+ 2006 Thomas Gleixner <tglx@linutronix.de>
+ 2007-2011 Freescale Semiconductor, Inc
+ 2007 Freescale Semiconductor, Inc
+ 2008-2009 / 2006-2008 Nokia Corporation
+ 2008-2009 Freescale Semiconductor, Inc
+ 2008-2009, MontaVista Software, Inc. <source@mvista.com> / 2010, by Texas Instruments
+ 2008,2009 STMicroelectronics / 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> / 2009 Alessandro Rubini <rubini@unipv.it>
+ 2008-2010 / 2006-2008 Nokia Corporation
+ 2008-2011 Freescale Semiconductor, Inc
+ 2008, 2011 Freescale Semiconductor, Inc
+ 2008,2011 Freescale Semiconductor, Inc
+ 2008-2012 Freescale Semiconductor, Inc
+ 2008 Altera Corporation / 2010 Thomas Chou <thomas@wytron.com.tw>
+ 2008 Atmel Corporation / 2013 Jagannadha Sutradharudu Teki, Xilinx Inc
+ 2008 by Texas Instruments / 2008 Mentor Graphics Corporation
+ 2008 Dave S.r.l. <www.dave.eu>
+ 2008 Extreme Engineering Solutions, Inc
+ 2008 Freescale Semiconductor, Inc
+ 2008 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> / 2004-2007 ARM Limited
+ 2008 Kim B. Heino / 2009
+ 2008 Qstreams Networks, Inc
+ 2008 Samsung Electronics / 2008-2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ 2008 STMicroelectronics / 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> / 2009 Alessandro Rubini <rubini@unipv.it>
+ 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ 2009-2010 eXMeritus, A Boeing Company / 2008-2009 Freescale Semiconductor, Inc
+ 2009-2010 Freescale Semiconductor, Inc
+ 2009-2010 Texas Instruments, Inc
+ 2009-2011 Freescale Semiconductor, Inc
+ 2009 coresystems GmbH
+ 2009 Freescale Semiconductor, Inc
+ 2009 Micrel Inc / 2011 Bticino s.p.a, Roberto Cerati <roberto.cerati@bticino.it>
+ 2009 MontaVista Software, Inc. <source@mvista.com> / 2006-2007 Nokia Corporation / 2005-2006 by Texas Instruments / 2005 Mentor Graphics Corporation
+ 2010-2011 Freescale Semiconductor, Inc
+ 2010-2011 NVIDIA Corporation
+ 2010-2012 NVIDIA Corporation
+ 2010-2013 NVIDIA Corporation
+ 2010 Broadcom / 2012 Oleksandr Tymoshenko / 2012 Stephen Warren
+ 2010 NISHIMOTO Hiroki / 2010 Renesas Solutions Corp
+ 2010 Thomas Chou <thomas@wytron.com.tw>
+ 2010, Thomas Chou <thomas@wytron.com.tw>
+ 2010 Thomas Chou <thomas@wytron.com.tw> / 2008-2009 Avionic Design GmbH / 2007-2008 Avionic Design Development GmbH
+ 2010 Thomas Chou <thomas@wytron.com.tw> / 2008 Altera Corporation
+ 2011-2012 Renesas Solutions Corp
+ 2011 - 2012 Samsung Electronics / 2003-2006, Cluster File Systems, Inc, info@clusterfs.com
+ 2011 Analog Devices Inc
+ 2011 Freescale Semiconductor, Inc
+ 2011 Infineon Technologies
+ 2011 Ivan Djelic <ivan.djelic@parrot.com>
+ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 1995-2002 Russell King / 2010 Shawn Lin (nobuhiro@andestech.com)
+ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 1996-1998 Russell King / 2010 Shawn Lin (nobuhiro@andestech.com)
+ 2011 Macpaul Lin (macpaul@andestech.com) / 2011 Andes Technology Corporation / 2010 Shawn Lin (nobuhiro@andestech.com)
+ 2011 Maxim Integrated Products
+ 2011 Parrot S.A
+ 2011 Renesas Solutions Corp
+ 2011 Renesas Solutions Corp / 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ 2011 The ChromiumOS Authors. All rights reserved
+ 2012-2013 Stephen Warren
+ 2012, by Texas Instruments
+ 2012, Google Inc
+ 2012 Renesas Solutions Corp
+ 2012 Samsung Electronics Co., Ltd
+ 2012 Stephen Warren
+ 2012 Texas Instruments Incorporated - http://www.ti.com/
+ 2013 Synopsys, Inc. (www.synopsys.com)
+License: GPL-2
+
+Files:
+ drivers/tpm/tpm_atmel_twi.c
+ drivers/gpio/tca642x.c
+ include/splash.h
+ include/fdt.h
+ include/libfdt.h
+ include/configs/controlcenterd.h
+ include/configs/mxs.h
+ include/configs/T1040QDS.h
+ include/tca642x.h
+ board/gdsys/p1022/tlb.c
+ board/gdsys/p1022/sdhc_boot.c
+ board/gdsys/p1022/ddr.c
+ board/gdsys/p1022/controlcenterd-id.c
+ board/gdsys/p1022/diu.c
+ board/gdsys/p1022/controlcenterd-id.h
+ board/gdsys/p1022/controlcenterd.c
+ board/gdsys/p1022/law.c
+ board/gdsys/common/dp501.h
+ common/splash.c
+ fs/jffs2/compr_lzo.c
+ arch/arm/include/asm/arch-am33xx/hardware_ti816x.h
+ arch/arm/mach-exynos/dmc_init_exynos4.c
+ arch/arm/mach-exynos/lowlevel_init.c
+ arch/arm/mach-exynos/clock_init_exynos4.c
+ arch/arm/mach-exynos/common_setup.h
+ arch/arm/cpu/armv7/am33xx/clock_ti816x.c
+Copyright:
+ 2013 Texas Instruments, Inc
+ 2013, Boundary Devices <info@boundarydevices.com>
+ 2006 David Gibson, IBM Corporation
+ 2012 Kim Phillips, Freescale Semiconductor
+ 2010-2013 Freescale Semiconductor, Inc
+ 2013 Marek Vasut <marex@denx.de>
+ 2010-2011 Freescale Semiconductor, Inc
+ 2004 Patrik Kluba
+ 1996-2002 Markus Franz Xaver Johannes Oberhumer
+ 2013 NVIDIA Corporation
+ 2011 The Chromium OS Authors
+ 2013 Samsung Electronics
+ 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ 2009, Texas Instruments, Incorporated
+License: GPL-2+
+
+Files: debian/*
+Copyright: Clint Adams <clint@debian.org>
+ Joey Hess <joeyh@debian.org>
+ Marc Singer <elf@debian.org>
+ Per Andersson <avtobiff@gmail.com>
+ Vagrant Cascadian <vagrant@debian.org>
+ Loïc Minier <lool@debian.org>
+License: GPL-2+
+
+Files: fs/yaffs2/yaffs_allocator.h
+ fs/yaffs2/yaffs_verify.h
+ fs/yaffs2/yaffs_packedtags1.h
+ fs/yaffs2/yaffs_yaffs1.h
+ fs/yaffs2/ydirectenv.h
+ fs/yaffs2/yaffs_yaffs2.h
+ fs/yaffs2/yaffsfs.h
+ fs/yaffs2/yaffs_osglue.h
+ fs/yaffs2/yaffs_flashif.h
+ fs/yaffs2/yaffs_nand.h
+ fs/yaffs2/yportenv.h
+ fs/yaffs2/yaffs_packedtags2.h
+ fs/yaffs2/yaffs_attribs.h
+ fs/yaffs2/yaffs_ecc.h
+ fs/yaffs2/yaffs_trace.h
+ fs/yaffs2/yaffs_guts.h
+ fs/yaffs2/yaffs_getblockinfo.h
+ fs/yaffs2/yaffs_bitmap.h
+ fs/yaffs2/yaffs_nameval.h
+ fs/yaffs2/yaffscfg.h
+ fs/yaffs2/yaffs_nandemul2k.h
+ fs/yaffs2/yaffs_mtdif2.h
+ fs/yaffs2/yaffs_flashif2.h
+ fs/yaffs2/yaffs_checkptrw.h
+ fs/yaffs2/yaffs_tagscompat.h
+ fs/yaffs2/yaffs_nandif.h
+ fs/yaffs2/yaffs_summary.h
+ fs/yaffs2/yaffs_mtdif.h
+Copyright: Copyright (C) 2002-2011 Aleph One Ltd.
+License: LGPL-2.1
+
+Files: lib/sha1.c
+Copyright: Copyright (C) 2003-2006 Christophe Devine
+License: LGPL-2.1
+
+Files: include/bzlib.h
+ lib/bzip2/*
+Copyright: Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
+License: bzlib-BSD-3
+
+Files: drivers/usb/musb-new/musb_host.h
+ drivers/usb/musb-new/musb_core.h
+ drivers/usb/musb-new/musb_core.c
+ drivers/usb/musb-new/musb_gadget.c
+ drivers/usb/musb-new/musb_gadget.h
+ drivers/usb/musb-new/musb_dma.h
+ drivers/usb/musb-new/musb_regs.h
+ drivers/usb/musb-new/musb_debug.h
+ drivers/usb/musb-new/musb_host.c
+ drivers/usb/musb-new/musb_gadget_ep0.c
+ drivers/usb/musb-new/musb_io.h
+Copyright: Copyright 2005 Mentor Graphics Corporation
+ Copyright (C) 2005-2006 by Texas Instruments
+ Copyright (C) 2006-2007 Nokia Corporation
+ Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+License: GPL-2
+
+Files: net/dns.c
+ include/slre.h
+ lib/slre.c
+Copyright: 2008 Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
+ 2004-2005 Sergey Lyubka <valenok@gmail.com>
+ 2009 Robin Getz <rgetz@blackfin.uclinux.org>]
+License: Beerware
+
+Files: include/libfdt.h
+ include/fdt.h
+Copyright: 2006 David Gibson, IBM Corporation
+ 2012 Kim Phillips, Freescale Semiconductor
+License: libfdt-BSD-GPL
+
+Files: include/pcmcia/yenta.h
+Copyright: 1999 David A. Hinds. All Rights Reserved
+License: MPL-GPL
+
+License: MPL-GPL
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use
+ * your version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+
+License: libfdt-BSD-GPL
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+License: Beerware
+ "THE BEER-WARE LICENSE" (Revision 42):
+ Sergey Lyubka wrote this file. As long as you retain this notice you
+ can do whatever you want with this stuff. If we meet some day, and you think
+ this stuff is worth it, you can buy me a beer in return.
+
+License: GPL-2
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ version 2 as published by the Free Software Foundation.
+ .
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/GPL-2'.
+
+License: bzlib-BSD-3
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ .
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ .
+ 2. The origin of this software must not be misrepresented; you must
+ not claim that you wrote the original software. If you use this
+ software in a product, an acknowledgment in the product
+ documentation would be appreciated but is not required.
+ .
+ 3. Altered source versions must be plainly marked as such, and must
+ not be misrepresented as being the original software.
+ .
+ 4. The name of the author may not be used to endorse or promote
+ products derived from this software without specific prior written
+ permission.
+ .
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+ OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+License: GPL-2+
+ This program is free software; you can redistribute it
+ and/or modify it under the terms of the GNU General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later
+ version.
+ .
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ PURPOSE. See the GNU General Public License for more
+ details.
+ .
+ You should have received a copy of the GNU General Public
+ License along with this package; if not, write to the Free
+ Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+ Boston, MA 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/GPL-2'.
+
+License: LGPL-2.1
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License version 2.1 as
+ published by the Free Software Foundation.
+ .
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+ .
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ MA 02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/LGPL-2.1'.
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd1 0x00000 0x10000 0x01000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd1 0x0 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x3F000 0x1000 0x1000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundand
+# environment sector is assumed present.
+
+# for Buffalo Linkstation Mini
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x3f000 0x01000 0x01000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x3F000 0x1000 0x1000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd0 0x30000 0x10000 0x10000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd4 0x360000 0x10000 0x10000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mmcblk0 0x80000 0x2000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR.
+
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd1 0x0000 0x4000 0x4000 2
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR.
+
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd2 0x0000 0x40000 0x20000 2
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+# Legacy u-boot versions:
+#/dev/mtd0 0xa0000 0x20000 0x20000
+
+# New u-boot versions:
+/dev/mtd0 0x60000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd5 0x00000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd4 0x0000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# This config is for QNAP TS-119, TS-219 and TS-219P boards.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mtd4 0x0000 0x1000 0x40000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+# Legacy u-boot versions:
+#/dev/mtd0 0x60000 0x20000 0x20000
+
+# New u-boot versions:
+/dev/mtd0 0x80000 0x20000 0x20000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mmcblk0 0xC0000 0x2000
--- /dev/null
+# Configuration file for fw_(printenv/saveenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+#
+# XXX this configuration might miss a fifth parameter for the "Number of
+# sectors"
+
+# MTD device name Device offset Env. size Flash sector size
+/dev/mmcblk0 0x60000 0x2000
--- /dev/null
+.\" Copyright © 2008 Per Andersson <avtobiff@gmail.com>
+.\" This man page is covered by the GNU General Public License (GPLv2 or higher).
+.TH fw_printenv 8 "August 2008" "Debian Project" ""
+
+.SH NAME
+fw_printenv \- Tool for printing environment for the bootloader U-Boot
+
+.SH SYNOPSIS
+fw_printenv [ \fB\-n\fP \fIname\fP ] [ \fIname\fP \fI...\fP ]
+
+.SH DESCRIPTION
+\fIfw_printenv\fP is a simple tool for printing the environment for the
+bootloader U-Boot. All environment variables matching the names given as
+arguments are shown. If \fIfw_printenv\fP is called without any arguments the
+entire environment is printed.
+
+.SH OPTIONS
+.IP \fB\-n\fP
+If the \fBn\fP flag is set \fIfw_printenv\fP only prints the value of the supplied variable \fIname\fP.
+
+.SH FILES
+.IP \fB/etc/fw_env.config\fP
+Configuration file for fw_printenv.
+
+.SH SEE ALSO
+fw_setenv(8)
+
+.SH AUTHOR
+Wolfgang Denk <wd@denx.de>
+.PP
+This manual page was written by Per Andersson <avtobiff@gmail.com>
--- /dev/null
+.\" Copyright © 2008 Per Andersson <avtobiff@gmail.com>
+.\" This man page is covered by the GNU General Public License (GPLv2 or higher).
+.TH fw_setenv 8 "August 2008" "Debian Project" ""
+
+.SH NAME
+fw_setenv \- Tool for modifying the environment for the bootloader U\-Boot
+
+.SH SYNOPSIS
+fw_setenv \fIname\fP [ \fIvalue\fP ]
+
+.SH DESCRIPTION
+\fIfw_setenv\fP is a simple tool for modifying either the environment for the
+bootloader U-Boot. If the variable already is set in the environment it is
+updated, otherwise it is created and set. If only one argument is given,
+variable name, the corresponding variable is deleted.
+
+.SH FILES
+.IP \fB/etc/fw_env.config\fP
+Configuration file for fw_setenv.
+
+.SH SEE ALSO
+fw_printenv(8)
+
+.SH AUTHOR
+Wolfgang Denk <wd@denx.de>
+.PP
+This manual page was written by Per Andersson <avtobiff@gmail.com>
--- /dev/null
+From ebdb222b0d65bcc050e3f0fd6e97faf17fb3eae4 Mon Sep 17 00:00:00 2001
+Sender: Loïc Minier <loic.minier@linaro.org>
+From: Enric Balletbo i Serra <eballetbo@iseebcn.com>
+Date: Wed, 23 Feb 2011 14:35:41 +0100
+Subject: [PATCH] ARM: OMAP3: Revamp IGEP default configuration
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The default IGEP configuration doesn't do anything useful; using some
+boot.scr search logic like BeagleBoard is much more useful.
+
+Signed-off-by: Loïc Minier <loic.minier@linaro.org>
+---
+ include/configs/igep0020.h | 55 ++++++++++++++++++++++++++++++++++++++++---
+ 1 files changed, 51 insertions(+), 4 deletions(-)
+
+diff --git a/include/configs/igep0020.h b/include/configs/igep0020.h
+index c19ecc0..2466562 100644
+--- a/include/configs/igep0020.h
++++ b/include/configs/igep0020.h
+@@ -130,13 +130,60 @@
+ #define CONFIG_TWL4030_POWER 1
+
+ /* Environment information */
+-#define CONFIG_BOOTCOMMAND \
+- "mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0"
+-
+ #define CONFIG_BOOTDELAY 3
+
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+- "usbtty=cdc_acm\0"
++ "loadaddr=0x82000000\0" \
++ "usbtty=cdc_acm\0" \
++ "console=ttyS2,115200n8\0" \
++ "mpurate=500\0" \
++ "vram=12M\0" \
++ "dvimode=1024x768MR-16@60\0" \
++ "defaultdisplay=dvi\0" \
++ "mmcdev=0\0" \
++ "mmcroot=/dev/mmcblk0p2 rw\0" \
++ "mmcrootfstype=ext3 rootwait\0" \
++ "nandroot=/dev/mtdblock4 rw\0" \
++ "nandrootfstype=jffs2\0" \
++ "mmcargs=setenv bootargs console=${console} " \
++ "mpurate=${mpurate} " \
++ "vram=${vram} " \
++ "omapfb.mode=dvi:${dvimode} " \
++ "omapfb.debug=y " \
++ "omapdss.def_disp=${defaultdisplay} " \
++ "root=${mmcroot} " \
++ "rootfstype=${mmcrootfstype}\0" \
++ "nandargs=setenv bootargs console=${console} " \
++ "mpurate=${mpurate} " \
++ "vram=${vram} " \
++ "omapfb.mode=dvi:${dvimode} " \
++ "omapfb.debug=y " \
++ "omapdss.def_disp=${defaultdisplay} " \
++ "root=${nandroot} " \
++ "rootfstype=${nandrootfstype}\0" \
++ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
++ "bootscript=echo Running bootscript from mmc ...; " \
++ "source ${loadaddr}\0" \
++ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
++ "mmcboot=echo Booting from mmc ...; " \
++ "run mmcargs; " \
++ "bootm ${loadaddr}\0" \
++ "nandboot=echo Booting from nand ...; " \
++ "run nandargs; " \
++ "nand read ${loadaddr} 280000 400000; " \
++ "bootm ${loadaddr}\0" \
++
++#define CONFIG_BOOTCOMMAND \
++ "if mmc rescan ${mmcdev}; then " \
++ "if run loadbootscript; then " \
++ "run bootscript; " \
++ "else " \
++ "if run loaduimage; then " \
++ "run mmcboot; " \
++ "else run nandboot; " \
++ "fi; " \
++ "fi; " \
++ "else run nandboot; fi"
+
+ #define CONFIG_AUTO_COMPLETE 1
+
+--
+1.7.2.3
+
--- /dev/null
+Add u-boot.kwb to "make all" target on Kirkwood.
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -743,6 +743,7 @@ endif
+ ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
+ ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
+ ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
++ALL-$(CONFIG_KIRKWOOD) += u-boot.kwb
+ ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
+ ifeq ($(CONFIG_SPL_FRAMEWORK),y)
+ ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
--- /dev/null
+Add the debian revision to the U-boot version, which is displayed at
+boot and can be helpful to determine which specific version is used.
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -350,7 +350,7 @@ KBUILD_AFLAGS := -D__ASSEMBLY__
+
+ # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
+ UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
+-UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
++UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)$(DEBIAN_REVISION)
+
+ export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
+ export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
--- /dev/null
+Index: u-boot/include/configs/ti_omap5_common.h
+===================================================================
+--- u-boot.orig/include/configs/ti_omap5_common.h
++++ u-boot/include/configs/ti_omap5_common.h
+@@ -67,6 +67,18 @@
+ #define DFUARGS
+ #endif
+
++#define BOOT_TARGET_DEVICES(func) \
++ func(MMC, mmc, 0) \
++ func(MMC, mmc, 1) \
++ func(PXE, pxe, na) \
++ func(DHCP, dhcp, na)
++
++#define CONFIG_BOOTCOMMAND \
++ "run findfdt; " \
++ "run distro_bootcmd"
++
++#include <config_distro_bootcmd.h>
++
+ #ifndef CONFIG_SPL_BUILD
+ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+@@ -122,24 +134,10 @@
+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
+ DFUARGS \
+ NETARGS \
++ BOOTENV
+
+-
+-#define CONFIG_BOOTCOMMAND \
+- "if test ${dofastboot} -eq 1; then " \
+- "echo Boot fastboot requested, resetting dofastboot ...;" \
+- "setenv dofastboot 0; saveenv;" \
+- "echo Booting into fastboot ...; fastboot 0;" \
+- "fi;" \
+- "run findfdt; " \
+- "run mmcboot;" \
+- "setenv mmcdev 1; " \
+- "setenv bootpart 1:2; " \
+- "setenv mmcroot /dev/mmcblk0p2 rw; " \
+- "run mmcboot;" \
+- ""
+ #endif
+
+-
+ /*
+ * SPL related defines. The Public RAM memory map the ROM defines the
+ * area between 0x40300000 and 0x4031E000 as a download area for OMAP5
--- /dev/null
+Description: Add spl/arndale-spl.bin rule
+Author: Ian Campbell <ijc@debian.org>
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -1339,6 +1339,9 @@ spl/u-boot-spl-dtb.sfp: spl/u-boot-spl
+ spl/boot.bin: spl/u-boot-spl
+ @:
+
++spl/arndale-spl.bin: spl/u-boot-spl
++ @:
++
+ tpl/u-boot-tpl.bin: tools prepare
+ $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
+
--- /dev/null
+Index: u-boot/include/configs/am335x_evm.h
+===================================================================
+--- u-boot.orig/include/configs/am335x_evm.h
++++ u-boot/include/configs/am335x_evm.h
+@@ -338,12 +338,8 @@
+ #endif
+
+ #ifdef CONFIG_USB_MUSB_GADGET
+-/* Removing USB gadget and can be enabled adter adding support usb DM */
+-#ifndef CONFIG_DM_ETH
+-#define CONFIG_USB_ETHER
+-#define CONFIG_USB_ETH_RNDIS
+-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
+-#endif /* CONFIG_DM_ETH */
++#define CONFIG_CMD_USB_MASS_STORAGE
++#define CONFIG_USB_FUNCTION_MASS_STORAGE
+
+ /* USB TI's IDs */
+ #define CONFIG_G_DNL_VENDOR_NUM 0x0451
--- /dev/null
+Ensure that CONFIG_SANDBOX is set when running "make env", avoiding a
+failure to build caused by config_distro_bootcmd.h following the wrong
+codepath...
+
+Index: u-boot/include/configs/sandbox.h
+===================================================================
+--- u-boot.orig/include/configs/sandbox.h
++++ u-boot/include/configs/sandbox.h
+@@ -127,6 +127,9 @@
+
+ #define CONFIG_BOOTCOMMAND ""
+
++#ifndef CONFIG_SANDBOX
++#define CONFIG_SANDBOX 1
++#endif
+ #include <config_distro_bootcmd.h>
+
+ #define CONFIG_KEEP_SERVERADDR
--- /dev/null
+From 3ff226557fcff7affa2fbad9bcef63eb742c27ad Mon Sep 17 00:00:00 2001
+From: Vagrant Cascadian <vagrant@debian.org>
+Date: Fri, 15 Apr 2016 13:34:26 -0700
+Subject: [PATCH] Revert "rockchip: rk3288: correct sdram setting"
+
+This reverts commit b5788dc0dd9570e98552833767f4373db965985d.
+
+Ram size is incorrectly reported as 512MB on a firefly-rk3288 board
+with 2GB of ram. Reverting this patch displays the full amount of ram.
+
+Series-to: u-boot
+---
+ arch/arm/mach-rockchip/rk3288/sdram_rk3288.c | 14 +++++++-------
+ 1 file changed, 7 insertions(+), 7 deletions(-)
+
+diff --git a/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c b/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c
+index 71330cb..2e21282 100644
+--- a/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c
++++ b/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c
+@@ -561,14 +561,14 @@ static void dram_all_config(const struct dram_info *dram,
+ &sdram_params->ch[chan];
+
+ sys_reg |= info->row_3_4 << SYS_REG_ROW_3_4_SHIFT(chan);
+- sys_reg |= 1 << SYS_REG_CHINFO_SHIFT(chan);
++ sys_reg |= chan << SYS_REG_CHINFO_SHIFT(chan);
+ sys_reg |= (info->rank - 1) << SYS_REG_RANK_SHIFT(chan);
+ sys_reg |= (info->col - 9) << SYS_REG_COL_SHIFT(chan);
+- sys_reg |= info->bk == 3 ? 0 : 1 << SYS_REG_BK_SHIFT(chan);
++ sys_reg |= info->bk == 3 ? 1 << SYS_REG_BK_SHIFT(chan) : 0;
+ sys_reg |= (info->cs0_row - 13) << SYS_REG_CS0_ROW_SHIFT(chan);
+ sys_reg |= (info->cs1_row - 13) << SYS_REG_CS1_ROW_SHIFT(chan);
+- sys_reg |= (2 >> info->bw) << SYS_REG_BW_SHIFT(chan);
+- sys_reg |= (2 >>info->dbw) << SYS_REG_DBW_SHIFT(chan);
++ sys_reg |= info->bw << SYS_REG_BW_SHIFT(chan);
++ sys_reg |= info->dbw << SYS_REG_DBW_SHIFT(chan);
+
+ dram_cfg_rbc(&dram->chan[chan], chan, sdram_params);
+ }
+@@ -720,13 +720,13 @@ size_t sdram_size_mb(struct rk3288_pmu *pmu)
+ rank = 1 + (sys_reg >> SYS_REG_RANK_SHIFT(ch) &
+ SYS_REG_RANK_MASK);
+ col = 9 + (sys_reg >> SYS_REG_COL_SHIFT(ch) & SYS_REG_COL_MASK);
+- bk = 3 - ((sys_reg >> SYS_REG_BK_SHIFT(ch)) & SYS_REG_BK_MASK) ;
++ bk = sys_reg & (1 << SYS_REG_BK_SHIFT(ch)) ? 3 : 0;
+ cs0_row = 13 + (sys_reg >> SYS_REG_CS0_ROW_SHIFT(ch) &
+ SYS_REG_CS0_ROW_MASK);
+ cs1_row = 13 + (sys_reg >> SYS_REG_CS1_ROW_SHIFT(ch) &
+ SYS_REG_CS1_ROW_MASK);
+- bw = (2 >> (sys_reg >> SYS_REG_BW_SHIFT(ch)) &
+- SYS_REG_BW_MASK);
++ bw = (sys_reg >> SYS_REG_BW_SHIFT(ch)) &
++ SYS_REG_BW_MASK;
+ row_3_4 = sys_reg >> SYS_REG_ROW_3_4_SHIFT(ch) &
+ SYS_REG_ROW_3_4_MASK;
+
+--
+2.1.4
+
--- /dev/null
+Index: u-boot/tools/env/fw_env_main.c
+===================================================================
+--- u-boot.orig/tools/env/fw_env_main.c
++++ u-boot/tools/env/fw_env_main.c
+@@ -93,7 +93,7 @@ void usage_setenv(void)
+ "\n"
+ "Script Syntax:\n"
+ " key [space] value\n"
+- " lines starting with '#' are treated as commment\n"
++ " lines starting with '#' are treated as comment\n"
+ "\n"
+ " A variable without value will be deleted. Any number of spaces are\n"
+ " allowed between key and value. Space inside of the value is treated\n"
--- /dev/null
+Index: u-boot/board/hisilicon/hikey/hikey.c
+===================================================================
+--- u-boot.orig/board/hisilicon/hikey/hikey.c
++++ u-boot/board/hisilicon/hikey/hikey.c
+@@ -76,7 +76,7 @@ static const struct pl01x_serial_platdat
+ #elif CONFIG_CONS_INDEX == 4
+ .base = HI6220_UART3_BASE,
+ #else
+-#error "Unsuported console index value."
++#error "Unsupported console index value."
+ #endif
+ .type = TYPE_PL011,
+ .clock = 19200000
+Index: u-boot/fs/fat/fat_write.c
+===================================================================
+--- u-boot.orig/fs/fat/fat_write.c
++++ u-boot/fs/fat/fat_write.c
+@@ -1136,7 +1136,7 @@ int file_fat_write(const char *filename,
+ loff_t maxsize, loff_t *actwrite)
+ {
+ if (offset != 0) {
+- printf("Error: non zero offset is currently not suported.\n");
++ printf("Error: non zero offset is currently not supported.\n");
+ return -1;
+ }
+
--- /dev/null
+Index: u-boot/arch/powerpc/cpu/mpc8xx/spi.c
+===================================================================
+--- u-boot.orig/arch/powerpc/cpu/mpc8xx/spi.c
++++ u-boot/arch/powerpc/cpu/mpc8xx/spi.c
+@@ -455,7 +455,7 @@ ssize_t spi_xfer (size_t count)
+ *
+ * The Serial Peripheral Interface (SPI) is tested in the local loopback mode.
+ * The interface is configured accordingly and several packets
+- * are transfered. The configurable test parameters are:
++ * are transferred. The configurable test parameters are:
+ * TEST_MIN_LENGTH - minimum size of packet to transfer
+ * TEST_MAX_LENGTH - maximum size of packet to transfer
+ * TEST_NUM - number of tests
+Index: u-boot/arch/sparc/cpu/leon3/usb_uhci.c
+===================================================================
+--- u-boot.orig/arch/sparc/cpu/leon3/usb_uhci.c
++++ u-boot/arch/sparc/cpu/leon3/usb_uhci.c
+@@ -55,7 +55,7 @@
+ * For Interrupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
+ * will be inserted after the appropriate (depending the interval setting) skeleton TD.
+ * If an interrupt has been detected the dev->irqhandler is called. The status and number
+- * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
++ * of transferred bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
+ * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned,
+ * the interrupt TD will be reactivated.
+ *
+@@ -229,7 +229,7 @@ unsigned long usb_uhci_td_stat(unsigned
+ return result;
+ }
+
+-/* get the status and the transfered len of a td chain.
++/* get the status and the transferred len of a td chain.
+ * called from the completion handler
+ */
+ int usb_get_td_status(uhci_td_t * td, struct usb_device *dev)
+@@ -247,7 +247,7 @@ int usb_get_td_status(uhci_td_t * td, st
+ stat = usb_uhci_td_stat(temp);
+ info = swap_32((unsigned long)READ32(&mytd->info));
+ if (((info & 0xff) != USB_PID_SETUP) && (((info >> 21) & 0x7ff) != 0x7ff) && (temp & 0x7FF) != 0x7ff) { /* if not setup and not null data pack */
+- dev->act_len += (temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */
++ dev->act_len += (temp & 0x7FF) + 1; /* the transferred len is act_len + 1 */
+ }
+ if (stat) { /* status no ok */
+ dev->status = stat;
+@@ -621,7 +621,7 @@ void usb_check_int_chain(void)
+ if ((td->dev_ptr != 0L) && !(status & TD_CTRL_ACTIVE)) {
+ /* td is not active and a device is assigned -> call irqhandler */
+ dev = (struct usb_device *)td->dev_ptr;
+- dev->irq_act_len = ((status & 0x7FF) == 0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */
++ dev->irq_act_len = ((status & 0x7FF) == 0x7FF) ? 0 : (status & 0x7FF) + 1; /* transferred length */
+ dev->irq_status = usb_uhci_td_stat(status); /* get status */
+ res = dev->irq_handle(dev); /* call irqhandler */
+ if (res == 1) {
+Index: u-boot/board/mpl/common/usb_uhci.c
+===================================================================
+--- u-boot.orig/board/mpl/common/usb_uhci.c
++++ u-boot/board/mpl/common/usb_uhci.c
+@@ -52,7 +52,7 @@
+ * For Interrupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
+ * will be inserted after the appropriate (depending the interval setting) skeleton TD.
+ * If an interrupt has been detected the dev->irqhandler is called. The status and number
+- * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
++ * of transferred bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
+ * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned,
+ * the interrupt TD will be reactivated.
+ *
+@@ -156,7 +156,7 @@ unsigned long usb_uhci_td_stat(unsigned
+ return result;
+ }
+
+-/* get the status and the transfered len of a td chain.
++/* get the status and the transferred len of a td chain.
+ * called from the completion handler
+ */
+ int usb_get_td_status(uhci_td_t *td,struct usb_device *dev)
+@@ -177,7 +177,7 @@ int usb_get_td_status(uhci_td_t *td,stru
+ (((info >> 21) & 0x7ff)!= 0x7ff) &&
+ (temp & 0x7FF)!=0x7ff)
+ { /* if not setup and not null data pack */
+- dev->act_len+=(temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */
++ dev->act_len+=(temp & 0x7FF) + 1; /* the transferred len is act_len + 1 */
+ }
+ if(stat) { /* status no ok */
+ dev->status=stat;
+@@ -533,7 +533,7 @@ void usb_check_int_chain(void)
+ if((td->dev_ptr!=0L) && !(status & TD_CTRL_ACTIVE)) {
+ /* td is not active and a device is assigned -> call irqhandler */
+ dev=(struct usb_device *)td->dev_ptr;
+- dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */
++ dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transferred length */
+ dev->irq_status=usb_uhci_td_stat(status); /* get status */
+ res=dev->irq_handle(dev); /* call irqhandler */
+ if(res==1) {
+Index: u-boot/cmd/fdc.c
+===================================================================
+--- u-boot.orig/cmd/fdc.c
++++ u-boot/cmd/fdc.c
+@@ -459,7 +459,7 @@ retryrw:
+ break;
+ }
+ if((c&0xC0)==0x80) { /* output */
+- PRINTF("Transfer error transfered: at %ld, MSR=%02X\n",i,c);
++ PRINTF("Transfer error transferred: at %ld, MSR=%02X\n",i,c);
+ if(i>6) {
+ for(ii=0;ii<7;ii++) {
+ pCMD->result[ii]=bufferw[(i-7+ii)];
+Index: u-boot/common/usb.c
+===================================================================
+--- u-boot.orig/common/usb.c
++++ u-boot/common/usb.c
+@@ -210,7 +210,7 @@ int usb_submit_int_msg(struct usb_device
+ * clear keyboards LEDs). For data transfers, (storage transfers) we don't
+ * allow control messages with 0 timeout, by previousely resetting the flag
+ * asynch_allowed (usb_disable_asynch(1)).
+- * returns the transfered length if OK or -1 if error. The transfered length
++ * returns the transferred length if OK or -1 if error. The transferred length
+ * and the current status are stored in the dev->act_len and dev->status.
+ */
+ int usb_control_msg(struct usb_device *dev, unsigned int pipe,
+Index: u-boot/common/usb_storage.c
+===================================================================
+--- u-boot.orig/common/usb_storage.c
++++ u-boot/common/usb_storage.c
+@@ -599,7 +599,7 @@ static int usb_stor_CBI_get_status(ccb *
+ us->ip_wanted = 0;
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+- debug("Got interrupt data 0x%x, transfered %d status 0x%lX\n",
++ debug("Got interrupt data 0x%x, transferred %d status 0x%lX\n",
+ us->ip_data, us->pusb_dev->irq_act_len,
+ us->pusb_dev->irq_status);
+ /* UFI gives us ASC and ASCQ, like a request sense */
+Index: u-boot/doc/README.POST
+===================================================================
+--- u-boot.orig/doc/README.POST
++++ u-boot/doc/README.POST
+@@ -494,7 +494,7 @@ This test will verify the following ALU
+ This group will contain: b, bl, bc.
+
+ The first 2 instructions (b, bl) will be verified by jumping to
+- a fixed address and checking whether control was transfered to
++ a fixed address and checking whether control was transferred to
+ that very point. For the bl instruction the value of the link
+ register will be checked as well (using mfspr). To verify the bc
+ instruction various combinations of the BI/BO fields, the CTR
+Index: u-boot/doc/device-tree-bindings/spi/spi-bus.txt
+===================================================================
+--- u-boot.orig/doc/device-tree-bindings/spi/spi-bus.txt
++++ u-boot/doc/device-tree-bindings/spi/spi-bus.txt
+@@ -63,7 +63,7 @@ contain the following properties.
+ a header byte before reading data from the slave.
+
+ Some SPI controllers and devices support Dual and Quad SPI transfer mode.
+-It allows data in SPI system transfered in 2 wires(DUAL) or 4 wires(QUAD).
++It allows data in SPI system transferred in 2 wires(DUAL) or 4 wires(QUAD).
+ Now the value that spi-tx-bus-width and spi-rx-bus-width can receive is
+ only 1(SINGLE), 2(DUAL) and 4(QUAD).
+ Dual/Quad mode is not allowed when 3-wire mode is used.
+Index: u-boot/doc/kwboot.1
+===================================================================
+--- u-boot.orig/doc/kwboot.1
++++ u-boot/doc/kwboot.1
+@@ -20,7 +20,7 @@ must conform to Marvell's BootROM firmwa
+ Following power-up or a system reset, system BootROM code polls the
+ UART for a brief period of time, sensing a handshake message which
+ initiates an image upload. This program sends this boot message until
+-it receives a positive acknowledgement. The image is transfered using
++it receives a positive acknowledgement. The image is transferred using
+ Xmodem.
+
+ Additionally, this program implements a minimal terminal mode, which
+Index: u-boot/drivers/block/sym53c8xx.c
+===================================================================
+--- u-boot.orig/drivers/block/sym53c8xx.c
++++ u-boot/drivers/block/sym53c8xx.c
+@@ -657,7 +657,7 @@ void scsi_issue(ccb *pccb)
+ /* struct pccb must be set-up correctly */
+ retrycnt=0;
+ PRINTF("ID %d issue cmd %02X\n",pccb->target,pccb->cmd[0]);
+- pccb->trans_bytes=0; /* no bytes transfered yet */
++ pccb->trans_bytes=0; /* no bytes transferred yet */
+ scsi_set_script(pccb); /* fill in SCRIPT */
+ scsi_int_mask=STO | UDC | MA; /* | CMP; / * Interrupts which are enabled */
+ script_int_mask=0xff; /* enable all Ints */
+@@ -712,7 +712,7 @@ retry:
+ for(i=0;i<3;i++)
+ int_stat[i]=0; /* delete all int status */
+ retrycnt++;
+- PRINTF("ID: %X Phase Missmatch Retry %d Phase %02X transfered %lx\n",
++ PRINTF("ID: %X Phase Missmatch Retry %d Phase %02X transferred %lx\n",
+ pccb->target,retrycnt,scsi_read_byte(SBCL),pccb->trans_bytes);
+ scsi_write_dsp(phys_to_bus(&script_cmd[4])); /* start retry script */
+ goto retry;
+Index: u-boot/drivers/fpga/stratixII.c
+===================================================================
+--- u-boot.orig/drivers/fpga/stratixII.c
++++ u-boot/drivers/fpga/stratixII.c
+@@ -130,7 +130,7 @@ int StratixII_ps_fpp_load (Altera_desc *
+ /* 3.1 check stratix has not signaled us an error */
+ if (fns->status (cookie) != 1) {
+ printf
+- ("\n%s(%d) Stratix failed (byte transfered till failure 0x%x)\n",
++ ("\n%s(%d) Stratix failed (byte transferred till failure 0x%x)\n",
+ __FUNCTION__, __LINE__, bytecount);
+ fns->abort (cookie);
+ return FPGA_FAIL;
+Index: u-boot/include/usb.h
+===================================================================
+--- u-boot.orig/include/usb.h
++++ u-boot/include/usb.h
+@@ -130,7 +130,7 @@ struct usb_device {
+ int string_langid; /* language ID for strings */
+ int (*irq_handle)(struct usb_device *dev);
+ unsigned long irq_status;
+- int irq_act_len; /* transfered bytes */
++ int irq_act_len; /* transferred bytes */
+ void *privptr;
+ /*
+ * Child devices - if this is a hub device
+@@ -138,7 +138,7 @@ struct usb_device {
+ */
+ unsigned long status;
+ unsigned long int_pending; /* 1 bit per ep, used by int_queue */
+- int act_len; /* transfered bytes */
++ int act_len; /* transferred bytes */
+ int maxchild; /* Number of ports if hub */
+ int portnr; /* Port number, 1=first */
+ #ifndef CONFIG_DM_USB
+Index: u-boot/post/lib_powerpc/b.c
+===================================================================
+--- u-boot.orig/post/lib_powerpc/b.c
++++ u-boot/post/lib_powerpc/b.c
+@@ -12,7 +12,7 @@
+ * Branch instructions: b, bl, bc
+ *
+ * The first 2 instructions (b, bl) are verified by jumping
+- * to a fixed address and checking whether control was transfered
++ * to a fixed address and checking whether control was transferred
+ * to that very point. For the bl instruction the value of the
+ * link register is checked as well (using mfspr).
+ * To verify the bc instruction various combinations of the BI/BO
--- /dev/null
+--- a/include/compiler.h
++++ b/include/compiler.h
+@@ -15,7 +15,7 @@
+ defined(__sun__) || \
+ defined(__APPLE__)
+ # include <inttypes.h>
+-#elif defined(__linux__) || defined(__WIN32__) || defined(__MINGW32__)
++#elif defined(__linux__) || defined(__WIN32__) || defined(__MINGW32__) || defined(__GLIBC__)
+ # include <stdint.h>
+ #endif
+
+@@ -41,7 +41,7 @@
+ #define O_BINARY 0
+ #endif
+
+-#ifdef __linux__
++#if defined(__linux__) || defined(__GLIBC__)
+ # include <endian.h>
+ # include <byteswap.h>
+ #elif defined(__MACH__) || defined(__FreeBSD__)
--- /dev/null
+[MIPS] Fix little-endian build with non-ELDK toolchains
+
+We've been in trouble for a long time when cross compiling with non-ELDK
+toolchains. This is caused by -EB passed to CPPFLAGS incorrectly, by the
+lack of an endian specifier to LDFLAGS, and by wrong OUTPUT_FORMATs.
+
+We're going to implement two workarounds. One is the endianness specifier
+bugfix not to pass -EB / -EL to CPPFLAGS unless ELDK toolchain is used.
+Note that ELDK and non-ELDK toolchains know their default endianness, so
+the endianness specifier may not be necessary in principle.
+
+The other is removal of OUTPUT_FORMAT in *.lds files. If we have this,
+it doesn't work unless an endianness specifier is added to LDFLAGS. As
+we haven't added that to LDFLAGS so far, it must have not worked properly,
+except ELDK; I don't know why and how ELDK works, though.
+
+With these two changes, all objects will be generated and linked in the
+toolchain's default endianness. Then MAKEALL mips_el will work even with
+non-ELDK toolchain.
+
+Note that Linux/MIPS kernel has CONFIG_CPU_BIG_ENDIAN and
+CONFIG_CPU_LITTLE_ENDIAN alternatives to allow users to compile kernels
+with a toolchain for the other endianness. But U-Boot does not have such
+feature for now, and it's another story.
+
+Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+---
+ board/dbau1x00/u-boot.lds | 4 ----
+ board/gth2/u-boot.lds | 4 ----
+ board/incaip/u-boot.lds | 4 ----
+ board/pb1x00/u-boot.lds | 4 ----
+ board/purple/u-boot.lds | 4 ----
+ board/qemu-mips/u-boot.lds | 4 ----
+ board/tb0229/u-boot.lds | 2 --
+ cpu/mips/config.mk | 8 --------
+ examples/mips.lds | 4 ----
+ mips_config.mk | 26 ++++++++++++++++++++++++++
+ 10 files changed, 26 insertions(+), 38 deletions(-)
+
+Index: u-boot/examples/standalone/mips.lds
+===================================================================
+--- u-boot.orig/examples/standalone/mips.lds
++++ u-boot/examples/standalone/mips.lds
+@@ -5,10 +5,6 @@
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+-/*
+-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+-*/
+-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
+ OUTPUT_ARCH(mips)
+ SECTIONS
+ {
--- /dev/null
+Use a relative path to include the sunxi spl header, which allows
+mksunxiboot to build on any arch.
+
+--- a/tools/mksunxiboot.c
++++ b/tools/mksunxiboot.c
+@@ -15,7 +15,7 @@
+ #include <errno.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+-#include "asm/arch/spl.h"
++#include "../arch/arm/include/asm/arch-sunxi/spl.h"
+
+ #define STAMP_VALUE 0x5F0A6C39
+
--- /dev/null
+Enables support for ext4, the "load" command, and using bootz with raw initrds.
+
+Index: u-boot/include/configs/mx53loco.h
+===================================================================
+--- u-boot.orig/include/configs/mx53loco.h
++++ u-boot/include/configs/mx53loco.h
+@@ -46,6 +46,7 @@
+ #define CONFIG_CMD_FS_GENERIC
+ #define CONFIG_CMD_FAT
+ #define CONFIG_CMD_EXT2
++#define CONFIG_CMD_EXT4
+ #define CONFIG_DOS_PARTITION
+
+ /* Eth Configs */
--- /dev/null
+Index: u-boot/include/configs/mx6cuboxi.h
+===================================================================
+--- u-boot.orig/include/configs/mx6cuboxi.h
++++ u-boot/include/configs/mx6cuboxi.h
+@@ -99,7 +99,7 @@
+ "initrd_high=0xffffffff\0" \
+ "fdt_high=0xffffffff\0" \
+ "ip_dyn=yes\0" \
+- "console=" CONFIG_CONSOLE_DEV "\0" \
++ "console=" CONFIG_CONSOLE_DEV ",115200\0" \
+ "bootm_size=0x10000000\0" \
+ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+ "update_sd_firmware=" \
--- /dev/null
+Enable booting of zImage/vmlinuz and initrd without requiring the use of
+mkimage to create uImage/uInitrd.
+
+Index: u-boot/include/configs/nokia_rx51.h
+===================================================================
+--- u-boot.orig/include/configs/nokia_rx51.h 2014-05-13 15:05:59.000000000 -0700
++++ u-boot/include/configs/nokia_rx51.h 2014-05-13 15:07:43.213088875 -0700
+@@ -136,6 +136,9 @@
+ #define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */
+ #define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */
+
++#define CONFIG_CMD_BOOTZ /* boot zImage */
++#define CONFIG_SUPPORT_RAW_INITRD
++
+ #ifdef ONENAND_SUPPORT
+
+ #define CONFIG_CMD_ONENAND /* ONENAND support */
--- /dev/null
+Index: u-boot/arch/powerpc/config.mk
+===================================================================
+--- u-boot.orig/arch/powerpc/config.mk
++++ u-boot/arch/powerpc/config.mk
+@@ -5,10 +5,6 @@
+ # SPDX-License-Identifier: GPL-2.0+
+ #
+
+-ifeq ($(CROSS_COMPILE),)
+-CROSS_COMPILE := ppc_8xx-
+-endif
+-
+ CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000
+ LDFLAGS_FINAL += --gc-sections
+ LDFLAGS_FINAL += --bss-plt
--- /dev/null
+From cfe02ff5b8c68b2108a91a9fc6f5309834d5d411 Mon Sep 17 00:00:00 2001
+From: Vagrant Cascadian <vagrant@debian.org>
+Date: Sat, 28 May 2016 16:08:39 -0700
+Subject: [PATCH] Convert odroid to use distro_bootcmd.
+
+---
+ include/configs/odroid.h | 23 +++++++++++++++++++----
+ 1 file changed, 19 insertions(+), 4 deletions(-)
+
+Index: u-boot/include/configs/odroid.h
+===================================================================
+--- u-boot.orig/include/configs/odroid.h
++++ u-boot/include/configs/odroid.h
+@@ -49,9 +49,7 @@
+ #define CONFIG_CMD_BOOTZ
+ #define CONFIG_FIT
+ #define CONFIG_FIT_VERBOSE
+-#define CONFIG_BOOTARGS "Please use defined boot"
+-#define CONFIG_BOOTCOMMAND "run autoboot"
+-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
++#define CONFIG_DEFAULT_CONSOLE "ttySAC1,115200n8\0"
+
+ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
+ - GENERATED_GBL_DATA_SIZE)
+@@ -93,6 +91,20 @@
+ "bl2 raw 0x1f 0x1d;" \
+ "tzsw raw 0x83f 0x138\0"
+
++#define BOOT_TARGET_DEVICES(func) \
++ func(MMC, mmc, 1) \
++ func(MMC, mmc, 0)
++
++#include <config_distro_bootcmd.h>
++
++#define MEM_LAYOUT_ENV_SETTINGS \
++ "bootm_size=0x10000000\0" \
++ "kernel_addr_r=0x42000000\0" \
++ "fdt_addr_r=0x43000000\0" \
++ "ramdisk_addr_r=0x43300000\0" \
++ "scriptaddr=0x50000000\0" \
++ "pxefile_addr_r=0x51000000\0"
++
+ /*
+ * Bootable media layout:
+ * dev: SD eMMC(part boot)
+@@ -171,7 +183,6 @@
+ "mmcbootpart=1\0" \
+ "mmcrootdev=0\0" \
+ "mmcrootpart=2\0" \
+- "bootdelay=0\0" \
+ "dfu_alt_system="CONFIG_DFU_ALT \
+ "dfu_alt_info=Please reset the board\0" \
+ "consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
+@@ -179,7 +190,9 @@
+ "initrdname=uInitrd\0" \
+ "initrdaddr=42000000\0" \
+ "scriptaddr=0x42000000\0" \
+- "fdtaddr=40800000\0"
++ "fdtaddr=40800000\0" \
++ MEM_LAYOUT_ENV_SETTINGS \
++ BOOTENV
+
+ /* I2C */
+ #define CONFIG_CMD_I2C
--- /dev/null
+add-debian-revision-to-u-boot-version
+mipsel-native-endianness.diff
+no-force-CROSS_COMPILE-powerpc.diff
+tools-generic-builds.patch
+tools-only-in-no-dot-config-targets.diff
+Makefile-add-kwb-target-to-all.patch
+hurd.diff
+
+udoo/udoo_quad-support.patch
+udoo/udoo-standardized-variables
+
+mx53loco
+
+n900-bootz-raw-initrd.diff
+
+beagleboneblack/usb-mass-storage.patch
+
+arndale/board-spl-rule.diff
+
+sh4-fix-linker-name-prefix.patch
+
+ensure-config-sandbox-for-make-env.patch
+mksunxiboot-spl.patch
+
+mx6cuboxi/serial_console_speed.patch
+
+am57xx/omap5_distro_bootcmd
+fix-typo-supported
+fix-typo-comment
+fix-typo-transferred
+
+upstream/sunxi/0001-sunxi-Fix-gmac-not-working-due-to-cpu_eth_init-no-lo.patch
+
+firefly/0001-Revert-rockchip-rk3288-correct-sdram-setting.patch
+
+upstream/ti-common/0001-ARM-omap-common-Add-standard-access-for-board-descri.patch
+upstream/ti-common/0002-ti-common-dra7-Add-standard-access-for-board-descrip.patch
+upstream/am57xx/0001-board-ti-AM57xx-Add-detection-logic-for-AM57xx-evm.patch
+odroid/0001-Convert-odroid-to-use-distro_bootcmd.patch
+
+upstream/submitted/reproducible/0001-Use-C-locale-when-setting-CC_VERSION_STRING-and-LD_V.patch
+upstream/sunxi/0002-sunxi-Enable-LDO3-and-LDO4-at-2.8V-on-OLinuxIno-Lime.patch
--- /dev/null
+Description: sh4-fix-linker-name-prefix.patch
+ u-boot currently fails to build from source on sh4 since the
+ linker name prefix defined in arch/sh/config.mk is outdated.
+ On current Debian installations, the binaries of the GNU
+ toolchain are named using the triplett scheme
+ $arch-$kernel-$toolchain. Thus, on sh4, the proper name
+ is "sh4-linux-gnu-ld" instead of "sh4-linux-ld". This
+ patch updates build configuration on sh4 to reflect that.
+
+---
+
+Origin: Debian
+Bug: (none yet)
+Bug-Debian: https://bugs.debian.org/771747
+Bug-Ubuntu: (none)
+Forwarded: (not yet)
+Reviewed-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+Last-Update: 2014-12-10
+
+--- u-boot-2014.10+dfsg1.orig/arch/sh/config.mk
++++ u-boot-2014.10+dfsg1/arch/sh/config.mk
+@@ -6,7 +6,7 @@
+ #
+
+ ifeq ($(CROSS_COMPILE),)
+-CROSS_COMPILE := sh4-linux-
++CROSS_COMPILE := sh4-linux-gnu-
+ endif
+
+ CONFIG_STANDALONE_LOAD_ADDR ?= 0x8C000000
--- /dev/null
+Description: Enable generic tools build
+Author: Hector Oron <zumbi@debian.org>
+
+--- u-boot-2014.10~rc2+dfsg1.orig/tools/Makefile
++++ u-boot-2014.10~rc2+dfsg1/tools/Makefile
+@@ -52,7 +52,7 @@ HOSTCFLAGS_xway-swap-bytes.o := -pedanti
+ hostprogs-y += mkenvimage
+ mkenvimage-objs := mkenvimage.o os_support.o lib/crc32.o
+
+-hostprogs-y += dumpimage mkimage
++hostprogs-y += dumpimage mkimage mksunxiboot kwboot
+ hostprogs-$(CONFIG_FIT_SIGNATURE) += fit_info fit_check_sign
+
+ FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := common/image-sig.o
--- /dev/null
+Revert upstream commit c7ad5cbb1ef2c33883f0fa7d0455095004fd306d:
+
+ Makefile: drop "tools-only" from no-dot-config-targets
+
+This indirectly pulls in a build-dependency on libssl-dev used for FIT
+image support, and possibly GPL/OpenSSL licensing incompatibility
+issues.
+
+Index: u-boot/Makefile
+===================================================================
+--- u-boot.orig/Makefile
++++ u-boot/Makefile
+@@ -411,7 +411,7 @@ timestamp_h := include/generated/timesta
+
+ no-dot-config-targets := clean clobber mrproper distclean \
+ help %docs check% coccicheck \
+- ubootversion backup
++ ubootversion backup tools-only
+
+ config-targets := 0
+ mixed-targets := 0
--- /dev/null
+Adds standardized variables, fdtfile, fdt_addr_r, ramdisk_addr_r and
+kernel_addr_r.
+
+Index: u-boot/include/configs/udoo.h
+===================================================================
+--- u-boot.orig/include/configs/udoo.h
++++ u-boot/include/configs/udoo.h
+@@ -74,6 +74,9 @@
+ "initrd_high=0xffffffff\0" \
+ "fdt_file=undefined\0" \
+ "fdt_addr=0x18000000\0" \
++ "fdt_addr_r=0x18000000\0" \
++ "ramdisk_addr_r=0x13000000\0" \
++ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
+ "mmcdev=0\0" \
+@@ -146,8 +149,10 @@
+ "fi;\0" \
+ "findfdt=" \
+ "if test $board_rev = MX6Q ; then " \
++ "setenv fdtfile imx6q-udoo.dtb; " \
+ "setenv fdt_file imx6q-udoo.dtb; fi; " \
+ "if test $board_rev = MX6DL ; then " \
++ "setenv fdt_file imx6dl-udoo.dtb; " \
+ "setenv fdt_file imx6dl-udoo.dtb; fi; " \
+ "if test $fdt_file = undefined; then " \
+ "echo WARNING: Could not determine dtb to use; fi; \0"
--- /dev/null
+Description: Features and sane scripts for UDOO board
+ Enable the following features:
+ * Ext4
+ * Generic FS (load)
+ * Raw initramfs
+ Tweak scripts to:
+ * use generic "load" command to load files from FS.
+ * provide "loadzimage" macro.
+ * account for different locations of boot script file.
+Author: Michael Fladischer <FladischerMichael@fladi.at>
+Last-Update: 2014-07-01
+Forwarded: no
+
+Index: u-boot/include/configs/udoo.h
+===================================================================
+--- u-boot.orig/include/configs/udoo.h
++++ u-boot/include/configs/udoo.h
+@@ -95,11 +95,15 @@
+ "fi\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
++ "loadbootenv=load mmc ${mmcdev}:${mmcpart} ${loadaddr} uEnv.txt\0" \
++ "importbootenv=echo Importing environment from mmc (uEnv.txt)...; " \
++ "env import -t $loadaddr $filesize\0" \
+ "loadbootscript=" \
+ "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
++ "loadzimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage\0" \
+ "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+@@ -149,17 +153,33 @@
+ "echo WARNING: Could not determine dtb to use; fi; \0"
+
+ #define CONFIG_BOOTCOMMAND \
+- "run findfdt; " \
+- "mmc dev ${mmcdev}; if mmc rescan; then " \
+- "if run loadbootscript; then " \
+- "run bootscript; " \
+- "else " \
+- "if run loadimage; then " \
+- "run mmcboot; " \
+- "else run netboot; " \
+- "fi; " \
+- "fi; " \
+- "else run netboot; fi"
++ "run findfdt; " \
++ "mmc dev ${mmcdev};" \
++ "if mmc rescan; then " \
++ "echo SD/MMC found on device ${mmcdev};" \
++ "if run loadbootenv; then " \
++ "run importbootenv;" \
++ "fi;" \
++ "echo Checking if uenvcmd is set ...;" \
++ "if test -n $uenvcmd; then " \
++ "echo Running uenvcmd ...;" \
++ "run uenvcmd;" \
++ "fi;" \
++ "if run loadbootscript; then " \
++ "echo Running boot script ${script} ...;" \
++ "run bootscript; " \
++ "fi;" \
++ "setenv script /boot/${script};" \
++ "if run loadbootscript; then " \
++ "echo Running boot script ${script} ...;" \
++ "run bootscript; " \
++ "fi;" \
++ "echo Running default loadzimage ...;" \
++ "if run loadzimage; then " \
++ "run loadfdt;" \
++ "run mmcboot;" \
++ "fi;" \
++ "fi;"
+
+ /* Print Buffer Size */
+ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
--- /dev/null
+From 212f96f6bd968f4359fff188d44157125cf24447 Mon Sep 17 00:00:00 2001
+From: "Kipisz, Steven" <s-kipisz2@ti.com>
+Date: Wed, 24 Feb 2016 12:30:58 -0600
+Subject: [PATCH] board: ti: AM57xx: Add detection logic for AM57xx-evm
+
+Current AM57xx evm supports both BeagleBoard-X15
+(http://beagleboard.org/x15) and AM57xx EVM
+(http://www.ti.com/tool/tmdxevm5728).
+
+The AM572x EValuation Module(EVM) provides an affordable platform to
+quickly start evaluation of Sitara. ARM Cortex-A15 AM57x Processors
+(AM5728, AM5726, AM5718, AM5716) and accelerate development for HMI,
+machine vision, networking, medical imaging and many other industrial
+applications. This EVM is based on the same BeagleBoard-X15 Chassis
+and adds mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's
+wlink8 offering.
+
+Since the EEPROM contents are compatible between the BeagleBoard-X15 and
+the AM57xx-evm, we add support for the detection logic to enable
+support for various user programmable scripting capability.
+
+NOTE: U-boot configuration is currently a superset of AM57xx evm and
+BeagleBoard-X15 and no additional configuration tweaking is needed.
+
+This change also sets up the stage for future support of TI AM57xx EVMs
+to the same base bootloader build.
+
+Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
+Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
+Signed-off-by: Nishanth Menon <nm@ti.com>
+Reviewed-by: Tom Rini <trini@konsulko.com>
+---
+ arch/arm/cpu/armv7/omap5/Kconfig | 1 +
+ board/ti/am57xx/Kconfig | 2 ++
+ board/ti/am57xx/board.c | 70 ++++++++++++++++++++++++++++++++++++++-
+ include/configs/am57xx_evm.h | 4 +++
+ include/configs/ti_omap5_common.h | 2 ++
+ 5 files changed, 78 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/cpu/armv7/omap5/Kconfig b/arch/arm/cpu/armv7/omap5/Kconfig
+index bfa264e..f265b34 100644
+--- a/arch/arm/cpu/armv7/omap5/Kconfig
++++ b/arch/arm/cpu/armv7/omap5/Kconfig
+@@ -15,6 +15,7 @@ config TARGET_DRA7XX_EVM
+
+ config TARGET_BEAGLE_X15
+ bool "BeagleBoard X15"
++ select TI_I2C_BOARD_DETECT
+
+ endchoice
+
+diff --git a/board/ti/am57xx/Kconfig b/board/ti/am57xx/Kconfig
+index bdb7795..17745ff 100644
+--- a/board/ti/am57xx/Kconfig
++++ b/board/ti/am57xx/Kconfig
+@@ -9,4 +9,6 @@ config SYS_VENDOR
+ config SYS_CONFIG_NAME
+ default "am57xx_evm"
+
++source "board/ti/common/Kconfig"
++
+ endif
+diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
+index 042f9ab..d712ab0 100644
+--- a/board/ti/am57xx/board.c
++++ b/board/ti/am57xx/board.c
+@@ -30,8 +30,12 @@
+ #include <dwc3-omap-uboot.h>
+ #include <ti-usb-phy-uboot.h>
+
++#include "../common/board_detect.h"
+ #include "mux_data.h"
+
++#define board_is_x15() board_ti_is("BBRDX15_")
++#define board_is_am572x_evm() board_ti_is("AM572PM_")
++
+ #ifdef CONFIG_DRIVER_TI_CPSW
+ #include <cpsw.h>
+ #endif
+@@ -41,8 +45,10 @@ DECLARE_GLOBAL_DATA_PTR;
+ /* GPIO 7_11 */
+ #define GPIO_DDR_VTT_EN 203
+
++#define SYSINFO_BOARD_NAME_MAX_LEN 45
++
+ const struct omap_sysinfo sysinfo = {
+- "Board: BeagleBoard x15\n"
++ "Board: UNKNOWN(BeagleBoard X15?) REV UNKNOWN\n"
+ };
+
+ static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
+@@ -246,6 +252,66 @@ struct vcores_data beagle_x15_volts = {
+ .iva.pmic = &tps659038,
+ };
+
++#ifdef CONFIG_SPL_BUILD
++/* No env to setup for SPL */
++static inline void setup_board_eeprom_env(void) { }
++
++/* Override function to read eeprom information */
++void do_board_detect(void)
++{
++ int rc;
++
++ rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
++ CONFIG_EEPROM_CHIP_ADDRESS);
++ if (rc)
++ printf("ti_i2c_eeprom_init failed %d\n", rc);
++}
++
++#else /* CONFIG_SPL_BUILD */
++
++/* Override function to read eeprom information: actual i2c read done by SPL*/
++void do_board_detect(void)
++{
++ char *bname = NULL;
++ int rc;
++
++ rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
++ CONFIG_EEPROM_CHIP_ADDRESS);
++ if (rc)
++ printf("ti_i2c_eeprom_init failed %d\n", rc);
++
++ if (board_is_x15())
++ bname = "BeagleBoard X15";
++ else if (board_is_am572x_evm())
++ bname = "AM572x EVM";
++
++ if (bname)
++ snprintf(sysinfo.board_string, SYSINFO_BOARD_NAME_MAX_LEN,
++ "Board: %s REV %s\n", bname, board_ti_get_rev());
++}
++
++static void setup_board_eeprom_env(void)
++{
++ char *name = "beagle_x15";
++ int rc;
++
++ rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
++ CONFIG_EEPROM_CHIP_ADDRESS);
++ if (rc)
++ goto invalid_eeprom;
++
++ if (board_is_am572x_evm())
++ name = "am57xx_evm";
++ else
++ printf("Unidentified board claims %s in eeprom header\n",
++ board_ti_get_name());
++
++invalid_eeprom:
++ set_board_info_env(name);
++}
++
++#endif /* CONFIG_SPL_BUILD */
++
+ void hw_data_init(void)
+ {
+ *prcm = &dra7xx_prcm;
+@@ -265,6 +331,8 @@ int board_init(void)
+ int board_late_init(void)
+ {
+ init_sata(0);
++ setup_board_eeprom_env();
++
+ /*
+ * DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds
+ * This is the POWERHOLD-in-Low behavior.
+diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
+index 6308cab..1fffdb1 100644
+--- a/include/configs/am57xx_evm.h
++++ b/include/configs/am57xx_evm.h
+@@ -88,4 +88,8 @@
+ #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
++/* EEPROM */
++#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
++#define CONFIG_EEPROM_BUS_ADDRESS 0
++
+ #endif /* __CONFIG_AM57XX_EVM_H */
+diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
+index d164e6a..d373cbc 100644
+--- a/include/configs/ti_omap5_common.h
++++ b/include/configs/ti_omap5_common.h
+@@ -117,6 +117,8 @@
+ "setenv fdtfile dra72-evm.dtb; fi;" \
+ "if test $board_name = beagle_x15; then " \
+ "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
++ "if test $board_name = am57xx_evm; then " \
++ "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine device tree to use; fi; \0" \
+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
+--
+2.1.4
+
--- /dev/null
+From 1453a1fdf1d5f98a8b40d1e61cb3e8370ca060c9 Mon Sep 17 00:00:00 2001
+From: Vagrant Cascadian <vagrant@debian.org>
+Date: Sun, 12 Jun 2016 05:18:48 -0700
+Subject: [PATCH] Use C locale when setting CC_VERSION_STRING and
+ LD_VERSION_STRING.
+
+The output reported may be locale-dependent, which results in
+unreproducible builds.
+
+ $ LANG=C ld --version | head -n 1
+ GNU ld (GNU Binutils for Debian) 2.26
+
+ $ LANG=it_CH.UTF-8 ld --version | head -n 1
+ ld di GNU (GNU Binutils for Debian) 2.26
+
+Forcing LC_ALL=C ensures the output is consistant regardless of the
+build environment.
+
+Thanks to HW42 for debugging the issue:
+
+ https://lists.alioth.debian.org/pipermail/reproducible-builds/Week-of-Mon-20160606/005722.html
+
+For more information about reproducible builds:
+
+ https://reproducible-builds.org/
+
+Series-to: u-boot
+Series-cc: HW42 <hw42@ipsumj.de>, reproducible-builds@lists.alioth.debian.org
+---
+ Makefile | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index 0f7d6f3..14e09d4 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1269,8 +1269,8 @@ prepare: prepare0
+ define filechk_version.h
+ (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
+ echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
+- echo \#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
+- echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
++ echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
++ echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
+ endef
+
+ # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
+--
+2.1.4
+
--- /dev/null
+From fc8991c61c393ce6a9d3dfc97cb56dbbd9e8cbba Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Thu, 17 Mar 2016 13:53:03 +0100
+Subject: [PATCH] sunxi: Fix gmac not working due to cpu_eth_init no longer
+ being called
+
+cpu_eth_init is no longer called for dm enabled eth drivers, this
+was causing the sunxi gmac eth controller to no longer work in u-boot.
+
+This commit fixes this by calling the clock, reset and pinmux setup
+function from s_init() and enabling the phy power pin (if any) from
+board_init().
+
+The enabling of phy power cannot be done from s_init because it uses dm
+and dm is not ready yet at this point.
+
+Note that the mdelay is dropped as the phy gets enabled much earlier
+now, so it is no longer needed.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Ian Campbell <ijc@hellion.org.uk>
+Tested-by: Karsten Merker <merker@debian.org>
+Tested-by: Michael Haas <haas@computerlinguist.org>
+---
+ arch/arm/cpu/armv7/sunxi/board.c | 28 +---------------------------
+ arch/arm/include/asm/arch-sunxi/sys_proto.h | 6 +++++-
+ board/sunxi/board.c | 5 +++++
+ board/sunxi/gmac.c | 14 +-------------
+ 4 files changed, 12 insertions(+), 41 deletions(-)
+
+diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
+index e80785b..7653148 100644
+--- a/arch/arm/cpu/armv7/sunxi/board.c
++++ b/arch/arm/cpu/armv7/sunxi/board.c
+@@ -152,6 +152,7 @@ void s_init(void)
+ timer_init();
+ gpio_init();
+ i2c_init_board();
++ eth_init_board();
+ }
+
+ #ifdef CONFIG_SPL_BUILD
+@@ -259,30 +260,3 @@ void enable_caches(void)
+ dcache_enable();
+ }
+ #endif
+-
+-#ifdef CONFIG_CMD_NET
+-/*
+- * Initializes on-chip ethernet controllers.
+- * to override, implement board_eth_init()
+- */
+-int cpu_eth_init(bd_t *bis)
+-{
+- __maybe_unused int rc;
+-
+-#ifdef CONFIG_MACPWR
+- gpio_request(CONFIG_MACPWR, "macpwr");
+- gpio_direction_output(CONFIG_MACPWR, 1);
+- mdelay(200);
+-#endif
+-
+-#ifdef CONFIG_SUNXI_GMAC
+- rc = sunxi_gmac_initialize(bis);
+- if (rc < 0) {
+- printf("sunxi: failed to initialize gmac\n");
+- return rc;
+- }
+-#endif
+-
+- return 0;
+-}
+-#endif
+diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h
+index 9df3744..a373319 100644
+--- a/arch/arm/include/asm/arch-sunxi/sys_proto.h
++++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h
+@@ -24,6 +24,10 @@ void sdelay(unsigned long);
+ void return_to_fel(uint32_t lr, uint32_t sp);
+
+ /* Board / SoC level designware gmac init */
+-int sunxi_gmac_initialize(bd_t *bis);
++#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUNXI_GMAC
++void eth_init_board(void);
++#else
++static inline void eth_init_board(void) {}
++#endif
+
+ #endif
+diff --git a/board/sunxi/board.c b/board/sunxi/board.c
+index 80eae9c..e16718f 100644
+--- a/board/sunxi/board.c
++++ b/board/sunxi/board.c
+@@ -90,6 +90,11 @@ int board_init(void)
+ if (ret)
+ return ret;
+
++#ifdef CONFIG_MACPWR
++ gpio_request(CONFIG_MACPWR, "macpwr");
++ gpio_direction_output(CONFIG_MACPWR, 1);
++#endif
++
+ /* Uses dm gpio code so do this here and not in i2c_init_board() */
+ return soft_i2c_board_init();
+ }
+diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
+index 4e222d8..69eb8ff 100644
+--- a/board/sunxi/gmac.c
++++ b/board/sunxi/gmac.c
+@@ -6,7 +6,7 @@
+ #include <asm/arch/clock.h>
+ #include <asm/arch/gpio.h>
+
+-int sunxi_gmac_initialize(bd_t *bis)
++void eth_init_board(void)
+ {
+ int pin;
+ struct sunxi_ccm_reg *const ccm =
+@@ -79,16 +79,4 @@ int sunxi_gmac_initialize(bd_t *bis)
+ for (pin = SUNXI_GPA(26); pin <= SUNXI_GPA(27); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
+ #endif
+-
+-#ifdef CONFIG_DM_ETH
+- return 0;
+-#else
+-# ifdef CONFIG_RGMII
+- return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII);
+-# elif defined CONFIG_GMII
+- return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_GMII);
+-# else
+- return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_MII);
+-# endif
+-#endif
+ }
+--
+2.1.4
+
--- /dev/null
+From affa020559bca31d6531e19cb1f009c22705a73d Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Thu, 31 Mar 2016 14:38:14 +0200
+Subject: [PATCH 2/2] sunxi: Enable LDO3 and LDO4 at 2.8V on OLinuxIno Lime
+ boards
+
+LDO3 and LDO4 are used to power port E resp. port G, which are exposed
+on gpio headers, so enable them at 2.8V as specified in the schematic.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ configs/A10-OLinuXino-Lime_defconfig | 2 ++
+ configs/A20-OLinuXino-Lime2_defconfig | 2 ++
+ configs/A20-OLinuXino-Lime_defconfig | 2 ++
+ 3 files changed, 6 insertions(+)
+
+Index: u-boot/configs/A10-OLinuXino-Lime_defconfig
+===================================================================
+--- u-boot.orig/configs/A10-OLinuXino-Lime_defconfig
++++ u-boot/configs/A10-OLinuXino-Lime_defconfig
+@@ -13,4 +13,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHC
+ # CONFIG_CMD_FLASH is not set
+ # CONFIG_CMD_FPGA is not set
+ CONFIG_CMD_GPIO=y
++CONFIG_AXP_ALDO3_VOLT=2800
++CONFIG_AXP_ALDO4_VOLT=2800
+ CONFIG_USB_EHCI_HCD=y
+Index: u-boot/configs/A20-OLinuXino-Lime2_defconfig
+===================================================================
+--- u-boot.orig/configs/A20-OLinuXino-Lime2_defconfig
++++ u-boot/configs/A20-OLinuXino-Lime2_defconfig
+@@ -14,4 +14,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGM
+ # CONFIG_CMD_FPGA is not set
+ CONFIG_CMD_GPIO=y
+ CONFIG_ETH_DESIGNWARE=y
++CONFIG_AXP_ALDO3_VOLT=2800
++CONFIG_AXP_ALDO4_VOLT=2800
+ CONFIG_USB_EHCI_HCD=y
+Index: u-boot/configs/A20-OLinuXino-Lime_defconfig
+===================================================================
+--- u-boot.orig/configs/A20-OLinuXino-Lime_defconfig
++++ u-boot/configs/A20-OLinuXino-Lime_defconfig
+@@ -12,4 +12,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHC
+ # CONFIG_CMD_FPGA is not set
+ CONFIG_CMD_GPIO=y
+ CONFIG_ETH_DESIGNWARE=y
++CONFIG_AXP_ALDO3_VOLT=2800
++CONFIG_AXP_ALDO4_VOLT=2800
+ CONFIG_USB_EHCI_HCD=y
--- /dev/null
+From 0bea813d0018303610ec487314003c21f0116a21 Mon Sep 17 00:00:00 2001
+From: Lokesh Vutla <lokeshvutla@ti.com>
+Date: Wed, 24 Feb 2016 12:30:54 -0600
+Subject: [PATCH 1/2] ARM: omap-common: Add standard access for board
+ description EEPROM
+
+Several TI EVMs have EEPROM that can contain board description information
+such as revision, DDR definition, serial number, etc. In just about all
+cases, these EEPROM are on the I2C bus and provides us the opportunity
+to centralize the generic operations involved.
+
+The on-board EEPROM on the BeagleBone Black, BeagleBone, AM335x EVM,
+AM43x GP EVM, AM57xx-evm, BeagleBoard-X15 share the same format.
+However, DRA-7* EVMs, OMAP4SDP use a modified format.
+
+We hence introduce logic which is generic between these platforms
+without enforcing any specific format. This allows the boards to use the
+relevant format for operations that they might choose.
+
+This module will compile for all TI SoC based boards when
+CONFIG_TI_I2C_BOARD_DETECT is enabled to have optimal build times for
+platforms that require this support.
+
+It is important to note that this logic is fundamental to the board
+configuration process such as DDR configuration which is needed in
+SPL, hence cannot be part of the standard u-boot driver model (which
+is available later in the process). Hence, to aid efficiency, the
+eeprom contents are copied over to SRAM scratchpad memory area at the
+first invocation to retrieve data.
+
+To prevent churn with cases such as DRA7, where eeprom format maybe
+incompatible, we introduce a generic common format in eeprom which
+is made available over accessor functions for usage.
+
+Special handling for BBG1 EEPROM had to be introduced thanks to the
+weird eeprom rev contents used.
+
+The follow on patches introduce the use of this library for AM335x,
+AM437x, and AM57xx.
+
+Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
+Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
+Signed-off-by: Roger Quadros <rogerq@ti.com>
+Signed-off-by: Nishanth Menon <nm@ti.com>
+Reviewed-by: Tom Rini <trini@konsulko.com>
+---
+ arch/arm/include/asm/omap_common.h | 4 +-
+ board/ti/common/Kconfig | 5 +
+ board/ti/common/Makefile | 6 +
+ board/ti/common/board_detect.c | 254 +++++++++++++++++++++++++++++++++++++
+ board/ti/common/board_detect.h | 140 ++++++++++++++++++++
+ 5 files changed, 408 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
+index d773b04..aef3126 100644
+--- a/arch/arm/include/asm/omap_common.h
++++ b/arch/arm/include/asm/omap_common.h
+@@ -713,7 +713,9 @@ static inline u8 is_dra72x(void)
+ #define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C)
+ #define OMAP_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20)
+ #define OMAP_SRAM_SCRATCH_BOOT_PARAMS (SRAM_SCRATCH_SPACE_ADDR + 0x24)
+-#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x28)
++#define OMAP_SRAM_SCRATCH_BOARD_EEPROM_START (SRAM_SCRATCH_SPACE_ADDR + 0x28)
++#define OMAP_SRAM_SCRATCH_BOARD_EEPROM_END (SRAM_SCRATCH_SPACE_ADDR + 0x200)
++#define OMAP_SRAM_SCRATCH_SPACE_END (OMAP_SRAM_SCRATCH_BOARD_EEPROM_END)
+
+ /* Boot parameters */
+ #define DEVICE_DATA_OFFSET 0x18
+diff --git a/board/ti/common/Kconfig b/board/ti/common/Kconfig
+new file mode 100644
+index 0000000..adf73ab
+--- /dev/null
++++ b/board/ti/common/Kconfig
+@@ -0,0 +1,5 @@
++config TI_I2C_BOARD_DETECT
++ bool "Support for Board detection for TI platforms"
++ help
++ Support for detection board information on Texas Instrument's
++ Evaluation Boards which have I2C based EEPROM detection
+diff --git a/board/ti/common/Makefile b/board/ti/common/Makefile
+new file mode 100644
+index 0000000..7170eac
+--- /dev/null
++++ b/board/ti/common/Makefile
+@@ -0,0 +1,6 @@
++# Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o
+diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c
+new file mode 100644
+index 0000000..6cf4859
+--- /dev/null
++++ b/board/ti/common/board_detect.c
+@@ -0,0 +1,254 @@
++/*
++ * Library to support early TI EVM EEPROM handling
++ *
++ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
++ * Lokesh Vutla
++ * Steve Kipisz
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/omap_common.h>
++#include <i2c.h>
++
++#include "board_detect.h"
++
++/**
++ * ti_i2c_eeprom_init - Initialize an i2c bus and probe for a device
++ * @i2c_bus: i2c bus number to initialize
++ * @dev_addr: Device address to probe for
++ *
++ * Return: 0 on success or corresponding error on failure.
++ */
++static int __maybe_unused ti_i2c_eeprom_init(int i2c_bus, int dev_addr)
++{
++ int rc;
++
++ if (i2c_bus >= 0) {
++ rc = i2c_set_bus_num(i2c_bus);
++ if (rc)
++ return rc;
++ }
++
++ return i2c_probe(dev_addr);
++}
++
++/**
++ * ti_i2c_eeprom_read - Read data from an EEPROM
++ * @dev_addr: The device address of the EEPROM
++ * @offset: Offset to start reading in the EEPROM
++ * @ep: Pointer to a buffer to read into
++ * @epsize: Size of buffer
++ *
++ * Return: 0 on success or corresponding result of i2c_read
++ */
++static int __maybe_unused ti_i2c_eeprom_read(int dev_addr, int offset,
++ uchar *ep, int epsize)
++{
++ return i2c_read(dev_addr, offset, 2, ep, epsize);
++}
++
++/**
++ * ti_eeprom_string_cleanup() - Handle eeprom programming errors
++ * @s: eeprom string (should be NULL terminated)
++ *
++ * Some Board manufacturers do not add a NULL termination at the
++ * end of string, instead some binary information is kludged in, hence
++ * convert the string to just printable characters of ASCII chart.
++ */
++static void __maybe_unused ti_eeprom_string_cleanup(char *s)
++{
++ int i, l;
++
++ l = strlen(s);
++ for (i = 0; i < l; i++, s++)
++ if (*s < ' ' || *s > '~') {
++ *s = 0;
++ break;
++ }
++}
++
++__weak void gpi2c_init(void)
++{
++}
++
++static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
++ u32 header, u32 size, uint8_t *ep)
++{
++ u32 byte, hdr_read;
++ int rc;
++
++ gpi2c_init();
++ rc = ti_i2c_eeprom_init(bus_addr, dev_addr);
++ if (rc)
++ return rc;
++
++ /*
++ * Read the header first then only read the other contents.
++ */
++ byte = 2;
++ rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
++ if (rc)
++ return rc;
++
++ /* Corrupted data??? */
++ if (hdr_read != header) {
++ rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
++ /*
++ * read the eeprom header using i2c again, but use only a
++ * 1 byte address (some legacy boards need this..)
++ */
++ byte = 1;
++ if (rc)
++ rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
++ 4);
++ if (rc)
++ return rc;
++ }
++ if (hdr_read != header)
++ return -1;
++
++ rc = i2c_read(dev_addr, 0x0, byte, ep, size);
++ if (rc)
++ return rc;
++
++ return 0;
++}
++
++int __maybe_unused ti_i2c_eeprom_am_get(int bus_addr, int dev_addr)
++{
++ int rc;
++ struct ti_am_eeprom am_ep;
++ struct ti_common_eeprom *ep;
++
++ ep = TI_EEPROM_DATA;
++ if (ep->header == TI_EEPROM_HEADER_MAGIC)
++ goto already_read;
++
++ /* Initialize with a known bad marker for i2c fails.. */
++ ep->header = TI_DEAD_EEPROM_MAGIC;
++ ep->name[0] = 0x0;
++ ep->version[0] = 0x0;
++ ep->serial[0] = 0x0;
++
++ rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC,
++ sizeof(am_ep), (uint8_t *)&am_ep);
++ if (rc)
++ return rc;
++
++ ep->header = am_ep.header;
++ strlcpy(ep->name, am_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
++ ti_eeprom_string_cleanup(ep->name);
++
++ /* BeagleBone Green '1' eeprom, board_rev: 0x1a 0x00 0x00 0x00 */
++ if (am_ep.version[0] == 0x1a && am_ep.version[1] == 0x00 &&
++ am_ep.version[2] == 0x00 && am_ep.version[3] == 0x00)
++ strlcpy(ep->version, "BBG1", TI_EEPROM_HDR_REV_LEN + 1);
++ else
++ strlcpy(ep->version, am_ep.version, TI_EEPROM_HDR_REV_LEN + 1);
++ ti_eeprom_string_cleanup(ep->version);
++ strlcpy(ep->serial, am_ep.serial, TI_EEPROM_HDR_SERIAL_LEN + 1);
++ ti_eeprom_string_cleanup(ep->serial);
++ strlcpy(ep->config, am_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
++ ti_eeprom_string_cleanup(ep->config);
++
++ memcpy(ep->mac_addr, am_ep.mac_addr,
++ TI_EEPROM_HDR_NO_OF_MAC_ADDR * TI_EEPROM_HDR_ETH_ALEN);
++
++already_read:
++ return 0;
++}
++
++bool __maybe_unused board_ti_is(char *name_tag)
++{
++ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
++
++ if (ep->header == TI_DEAD_EEPROM_MAGIC)
++ return false;
++ return !strncmp(ep->name, name_tag, TI_EEPROM_HDR_NAME_LEN);
++}
++
++bool __maybe_unused board_ti_rev_is(char *rev_tag, int cmp_len)
++{
++ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
++ int l;
++
++ if (ep->header == TI_DEAD_EEPROM_MAGIC)
++ return false;
++
++ l = cmp_len > TI_EEPROM_HDR_REV_LEN ? TI_EEPROM_HDR_REV_LEN : cmp_len;
++ return !strncmp(ep->version, rev_tag, l);
++}
++
++char * __maybe_unused board_ti_get_rev(void)
++{
++ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
++
++ if (ep->header == TI_DEAD_EEPROM_MAGIC)
++ return NULL;
++
++ return ep->version;
++}
++
++char * __maybe_unused board_ti_get_config(void)
++{
++ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
++
++ if (ep->header == TI_DEAD_EEPROM_MAGIC)
++ return NULL;
++
++ return ep->config;
++}
++
++char * __maybe_unused board_ti_get_name(void)
++{
++ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
++
++ if (ep->header == TI_DEAD_EEPROM_MAGIC)
++ return NULL;
++
++ return ep->name;
++}
++
++void __maybe_unused
++board_ti_get_eth_mac_addr(int index,
++ u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN])
++{
++ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
++
++ if (ep->header == TI_DEAD_EEPROM_MAGIC)
++ goto fail;
++
++ if (index < 0 || index >= TI_EEPROM_HDR_NO_OF_MAC_ADDR)
++ goto fail;
++
++ memcpy(mac_addr, ep->mac_addr[index], TI_EEPROM_HDR_ETH_ALEN);
++ return;
++
++fail:
++ memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
++}
++
++void __maybe_unused set_board_info_env(char *name)
++{
++ char *unknown = "unknown";
++ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
++
++ if (name)
++ setenv("board_name", name);
++ else if (ep->name)
++ setenv("board_name", ep->name);
++ else
++ setenv("board_name", unknown);
++
++ if (ep->version)
++ setenv("board_rev", ep->version);
++ else
++ setenv("board_rev", unknown);
++
++ if (ep->serial)
++ setenv("board_serial", ep->serial);
++ else
++ setenv("board_serial", unknown);
++}
+diff --git a/board/ti/common/board_detect.h b/board/ti/common/board_detect.h
+new file mode 100644
+index 0000000..c17ab34
+--- /dev/null
++++ b/board/ti/common/board_detect.h
+@@ -0,0 +1,140 @@
++/*
++ * Library to support early TI EVM EEPROM handling
++ *
++ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __BOARD_DETECT_H
++#define __BOARD_DETECT_H
++
++/* TI EEPROM MAGIC Header identifier */
++#define TI_EEPROM_HEADER_MAGIC 0xEE3355AA
++#define TI_DEAD_EEPROM_MAGIC 0xADEAD12C
++
++#define TI_EEPROM_HDR_NAME_LEN 8
++#define TI_EEPROM_HDR_REV_LEN 4
++#define TI_EEPROM_HDR_SERIAL_LEN 12
++#define TI_EEPROM_HDR_CONFIG_LEN 32
++#define TI_EEPROM_HDR_NO_OF_MAC_ADDR 3
++#define TI_EEPROM_HDR_ETH_ALEN 6
++
++/**
++ * struct ti_am_eeprom - This structure holds data read in from the
++ * AM335x, AM437x, AM57xx TI EVM EEPROMs.
++ * @header: This holds the magic number
++ * @name: The name of the board
++ * @version: Board revision
++ * @serial: Board serial number
++ * @config: Reserved
++ * @mac_addr: Any MAC addresses written in the EEPROM
++ *
++ * The data is this structure is read from the EEPROM on the board.
++ * It is used for board detection which is based on name. It is used
++ * to configure specific TI boards. This allows booting of multiple
++ * TI boards with a single MLO and u-boot.
++ */
++struct ti_am_eeprom {
++ unsigned int header;
++ char name[TI_EEPROM_HDR_NAME_LEN];
++ char version[TI_EEPROM_HDR_REV_LEN];
++ char serial[TI_EEPROM_HDR_SERIAL_LEN];
++ char config[TI_EEPROM_HDR_CONFIG_LEN];
++ char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
++} __attribute__ ((__packed__));
++
++/**
++ * struct ti_common_eeprom - Null terminated, usable EEPROM contents.
++ * header: Magic number
++ * @name: NULL terminated name
++ * @version: NULL terminated version
++ * @serial: NULL terminated serial number
++ * @config: NULL terminated Board specific config options
++ * @mac_addr: MAC addresses
++ */
++struct ti_common_eeprom {
++ u32 header;
++ char name[TI_EEPROM_HDR_NAME_LEN + 1];
++ char version[TI_EEPROM_HDR_REV_LEN + 1];
++ char serial[TI_EEPROM_HDR_SERIAL_LEN + 1];
++ char config[TI_EEPROM_HDR_CONFIG_LEN + 1];
++ char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
++};
++
++#define TI_EEPROM_DATA ((struct ti_common_eeprom *)\
++ OMAP_SRAM_SCRATCH_BOARD_EEPROM_START)
++
++/**
++ * ti_i2c_eeprom_am_get() - Consolidated eeprom data collection for AM* TI EVMs
++ * @bus_addr: I2C bus address
++ * @dev_addr: I2C slave address
++ *
++ * ep in SRAM is populated by the this AM generic function that consolidates
++ * the basic initialization logic common across all AM* platforms.
++ */
++int ti_i2c_eeprom_am_get(int bus_addr, int dev_addr);
++
++/**
++ * board_ti_is() - Board detection logic for TI EVMs
++ * @name_tag: Tag used in eeprom for the board
++ *
++ * Return: false if board information does not match OR eeprom wasn't read.
++ * true otherwise
++ */
++bool board_ti_is(char *name_tag);
++
++/**
++ * board_ti_rev_is() - Compare board revision for TI EVMs
++ * @rev_tag: Revision tag to check in eeprom
++ * @cmp_len: How many chars to compare?
++ *
++ * NOTE: revision information is often messed up (hence the str len match) :(
++ *
++ * Return: false if board information does not match OR eeprom was'nt read.
++ * true otherwise
++ */
++bool board_ti_rev_is(char *rev_tag, int cmp_len);
++
++/**
++ * board_ti_get_rev() - Get board revision for TI EVMs
++ *
++ * Return: NULL if eeprom was'nt read.
++ * Board revision otherwise
++ */
++char *board_ti_get_rev(void);
++
++/**
++ * board_ti_get_config() - Get board config for TI EVMs
++ *
++ * Return: NULL if eeprom was'nt read.
++ * Board config otherwise
++ */
++char *board_ti_get_config(void);
++
++/**
++ * board_ti_get_name() - Get board name for TI EVMs
++ *
++ * Return: NULL if eeprom was'nt read.
++ * Board name otherwise
++ */
++char *board_ti_get_name(void);
++
++/**
++ * board_ti_get_eth_mac_addr() - Get Ethernet MAC address from EEPROM MAC list
++ * @index: 0 based index within the list of MAC addresses
++ * @mac_addr: MAC address contained at the index is returned here
++ *
++ * Does not sanity check the mac_addr. Whatever is stored in EEPROM is returned.
++ */
++void board_ti_get_eth_mac_addr(int index, u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN]);
++
++/**
++ * set_board_info_env() - Setup commonly used board information environment vars
++ * @name: Name of the board
++ *
++ * If name is NULL, default_name is used.
++ */
++void set_board_info_env(char *name);
++
++#endif /* __BOARD_DETECT_H */
+--
+2.1.4
+
--- /dev/null
+From d3b98a9eb9415578c563ed3a989fefeaa1ec9d6d Mon Sep 17 00:00:00 2001
+From: Lokesh Vutla <lokeshvutla@ti.com>
+Date: Tue, 8 Mar 2016 09:18:04 +0530
+Subject: [PATCH 2/2] ti: common: dra7: Add standard access for board
+ description EEPROM
+
+DRA7 EVM revH and later EVMs have EEPROM populated that can contain board
+description information such as name, revision, DDR definition, etc. Adding
+support for this EEPROM format.
+
+Acked-by: Nishanth Menon <nm@ti.com>
+Reviewed-by: Tom Rini <trini@konsulko.com>
+Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
+---
+ board/ti/common/board_detect.c | 64 ++++++++++++++++++++++++++++++++++++++++++
+ board/ti/common/board_detect.h | 56 ++++++++++++++++++++++++++++++++++++
+ 2 files changed, 120 insertions(+)
+
+diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c
+index 6cf4859..e0ae1a5 100644
+--- a/board/ti/common/board_detect.c
++++ b/board/ti/common/board_detect.c
+@@ -160,6 +160,50 @@ already_read:
+ return 0;
+ }
+
++int __maybe_unused ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr)
++{
++ int rc, offset = 0;
++ struct dra7_eeprom dra7_ep;
++ struct ti_common_eeprom *ep;
++
++ ep = TI_EEPROM_DATA;
++ if (ep->header == DRA7_EEPROM_HEADER_MAGIC)
++ goto already_read;
++
++ /* Initialize with a known bad marker for i2c fails.. */
++ ep->header = 0xADEAD12C;
++ ep->name[0] = 0x0;
++ ep->version[0] = 0x0;
++ ep->serial[0] = 0x0;
++ ep->emif1_size = 0;
++ ep->emif2_size = 0;
++
++ rc = ti_i2c_eeprom_get(bus_addr, dev_addr, DRA7_EEPROM_HEADER_MAGIC,
++ sizeof(dra7_ep), (uint8_t *)&dra7_ep);
++ if (rc)
++ return rc;
++
++ ep->header = dra7_ep.header;
++ strlcpy(ep->name, dra7_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
++ ti_eeprom_string_cleanup(ep->name);
++
++ offset = dra7_ep.version_major - 1;
++
++ /* Rev F is skipped */
++ if (offset >= 5)
++ offset = offset + 1;
++ snprintf(ep->version, TI_EEPROM_HDR_REV_LEN + 1, "%c.%d",
++ 'A' + offset, dra7_ep.version_minor);
++ ti_eeprom_string_cleanup(ep->version);
++ ep->emif1_size = (u64)dra7_ep.emif1_size;
++ ep->emif2_size = (u64)dra7_ep.emif2_size;
++ strlcpy(ep->config, dra7_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
++ ti_eeprom_string_cleanup(ep->config);
++
++already_read:
++ return 0;
++}
++
+ bool __maybe_unused board_ti_is(char *name_tag)
+ {
+ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
+@@ -230,6 +274,26 @@ fail:
+ memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
+ }
+
++u64 __maybe_unused board_ti_get_emif1_size(void)
++{
++ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
++
++ if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
++ return 0;
++
++ return ep->emif1_size;
++}
++
++u64 __maybe_unused board_ti_get_emif2_size(void)
++{
++ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
++
++ if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
++ return 0;
++
++ return ep->emif2_size;
++}
++
+ void __maybe_unused set_board_info_env(char *name)
+ {
+ char *unknown = "unknown";
+diff --git a/board/ti/common/board_detect.h b/board/ti/common/board_detect.h
+index c17ab34..eb17f6f 100644
+--- a/board/ti/common/board_detect.h
++++ b/board/ti/common/board_detect.h
+@@ -44,6 +44,37 @@ struct ti_am_eeprom {
+ char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
+ } __attribute__ ((__packed__));
+
++/* DRA7 EEPROM MAGIC Header identifier */
++#define DRA7_EEPROM_HEADER_MAGIC 0xAA5533EE
++#define DRA7_EEPROM_HDR_NAME_LEN 16
++#define DRA7_EEPROM_HDR_CONFIG_LEN 4
++
++/**
++ * struct dra7_eeprom - This structure holds data read in from the DRA7 EVM
++ * EEPROMs.
++ * @header: This holds the magic number
++ * @name: The name of the board
++ * @version_major: Board major version
++ * @version_minor: Board minor version
++ * @config: Board specific config options
++ * @emif1_size: Size of DDR attached to EMIF1
++ * @emif2_size: Size of DDR attached to EMIF2
++ *
++ * The data is this structure is read from the EEPROM on the board.
++ * It is used for board detection which is based on name. It is used
++ * to configure specific DRA7 boards. This allows booting of multiple
++ * DRA7 boards with a single MLO and u-boot.
++ */
++struct dra7_eeprom {
++ u32 header;
++ char name[DRA7_EEPROM_HDR_NAME_LEN];
++ u16 version_major;
++ u16 version_minor;
++ char config[DRA7_EEPROM_HDR_CONFIG_LEN];
++ u32 emif1_size;
++ u32 emif2_size;
++} __attribute__ ((__packed__));
++
+ /**
+ * struct ti_common_eeprom - Null terminated, usable EEPROM contents.
+ * header: Magic number
+@@ -52,6 +83,8 @@ struct ti_am_eeprom {
+ * @serial: NULL terminated serial number
+ * @config: NULL terminated Board specific config options
+ * @mac_addr: MAC addresses
++ * @emif1_size: Size of the ddr available on emif1
++ * @emif2_size: Size of the ddr available on emif2
+ */
+ struct ti_common_eeprom {
+ u32 header;
+@@ -60,6 +93,8 @@ struct ti_common_eeprom {
+ char serial[TI_EEPROM_HDR_SERIAL_LEN + 1];
+ char config[TI_EEPROM_HDR_CONFIG_LEN + 1];
+ char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
++ u64 emif1_size;
++ u64 emif2_size;
+ };
+
+ #define TI_EEPROM_DATA ((struct ti_common_eeprom *)\
+@@ -76,6 +111,13 @@ struct ti_common_eeprom {
+ int ti_i2c_eeprom_am_get(int bus_addr, int dev_addr);
+
+ /**
++ * ti_i2c_eeprom_dra7_get() - Consolidated eeprom data for DRA7 TI EVMs
++ * @bus_addr: I2C bus address
++ * @dev_addr: I2C slave address
++ */
++int ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr);
++
++/**
+ * board_ti_is() - Board detection logic for TI EVMs
+ * @name_tag: Tag used in eeprom for the board
+ *
+@@ -130,6 +172,20 @@ char *board_ti_get_name(void);
+ void board_ti_get_eth_mac_addr(int index, u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN]);
+
+ /**
++ * board_ti_get_emif1_size() - Get size of the DDR on emif1 for TI EVMs
++ *
++ * Return: NULL if eeprom was'nt read or emif1_size is not available.
++ */
++u64 board_ti_get_emif1_size(void);
++
++/**
++ * board_ti_get_emif2_size() - Get size of the DDR on emif2 for TI EVMs
++ *
++ * Return: NULL if eeprom was'nt read or emif2_size is not available.
++ */
++u64 board_ti_get_emif2_size(void);
++
++/**
+ * set_board_info_env() - Setup commonly used board information environment vars
+ * @name: Name of the board
+ *
+--
+2.1.4
+
--- /dev/null
+#!/usr/bin/make -f
+
+DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+export DEBIAN_REVISION ?= $(shell dpkg-parsechangelog --show-field Version | sed -e 's,.*+dfsg,+dfsg,')
+export SOURCE_DATE_EPOCH = $(shell date -d "$$(dpkg-parsechangelog --count 1 --show-field Date)" +%s)
+
+ifneq ($(DEB_BUILD_GNU_TYPE),$(DEB_HOST_GNU_TYPE))
+export CROSS_COMPILE ?= $(DEB_HOST_GNU_TYPE)-
+cross_build_tools ?= y
+endif
+
+# support parallel build using DEB_BUILD_OPTIONS=parallel=N
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ DEB_UBOOT_FLAGS += -j$(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+endif
+
+# the upstream build passes LDFLAGS directly to ld instead of calling gcc for
+# linking; so instead of passing -Wl,foo in LDFLAGS as in automake builds, one
+# should set LDFLAGS to foo directly
+comma := ,
+LDFLAGS := $(patsubst -Wl$(comma)%,%,$(LDFLAGS))
+
+%:
+ dh $@ --parallel
+
+override_dh_auto_build: TOOLSDIR := debian/build/tools
+override_dh_auto_build:
+ set -e; sed -n 's/^$(DEB_HOST_ARCH)[[:space:]]\+//p' debian/targets \
+ | while read subarch platform targets; do \
+ builddir=debian/build/$$platform; \
+ targets="$$targets uboot.elf" ;\
+ mkdir -p $$builddir; \
+ $(MAKE) O=$$builddir $${platform}_defconfig; \
+ $(MAKE) $(DEB_UBOOT_FLAGS) O=$$builddir all; \
+ install -m 644 $$builddir/u-boot $$builddir/uboot.elf; \
+ $(CROSS_COMPILE)strip --remove-section=.comment \
+ $$builddir/uboot.elf; \
+ for target in $$targets; do \
+ chmod -x $$builddir/$$target; \
+ echo $$builddir/$$target /usr/lib/u-boot/$$platform/ \
+ >> debian/build/targets.$$subarch; \
+ echo $$platform >> debian/build/platforms.$$subarch; \
+ done ; \
+ case $${subarch} in \
+ rockchip) \
+ mkimage=$$builddir/tools/mkimage; \
+ test -x /usr/bin/mkimage && mkimage=/usr/bin/mkimage; \
+ $$mkimage -T rksd -n rk3288 \
+ -d $$builddir/spl/u-boot-spl-dtb.bin $$builddir/u-boot-spl-dtb.rksd; \
+ echo $$builddir/u-boot-spl-dtb.rksd /usr/lib/u-boot/$$platform/ \
+ >> debian/build/targets.$$subarch; \
+ ;; \
+ esac; \
+ done
+
+ # Avoid requirement for .config
+ mkdir -p $(TOOLSDIR)/include/config
+ touch $(TOOLSDIR)/include/config/auto.conf
+ # Load dummy config
+ $(MAKE) O=$(TOOLSDIR) CROSS_COMPILE=$(CROSS_COMPILE) sandbox_defconfig
+ # board-independent tools
+ $(MAKE) O=$(TOOLSDIR) $(DEB_UBOOT_FLAGS) \
+ CROSS_COMPILE=$(CROSS_COMPILE) \
+ CROSS_BUILD_TOOLS=$(cross_build_tools) \
+ NO_SDL=1 \
+ tools-only
+ $(MAKE) O=$(TOOLSDIR) $(DEB_UBOOT_FLAGS) \
+ CROSS_COMPILE=$(CROSS_COMPILE) \
+ NO_SDL=1 \
+ env
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/env/fw_printenv
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/mkimage
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/mkenvimage
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/kwboot
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/mksunxiboot
+ $(CROSS_COMPILE)strip --remove-section=.comment $(TOOLSDIR)/tools/dumpimage
+
+override_dh_auto_test:
+ # skip tests.
+
+override_dh_clean:
+ rm -rf debian/build/
+ dh_clean
+
+override_dh_gencontrol:
+ debian/bin/update-substvars
+ dh_gencontrol
+
+get-orig-source:
+ # Use uscan from the devscripts package to download new
+ # tarball, remove files incompatible with the DFSG (see
+ # Files-Excluded in debian/copyright), and repack with xz
+ # compression.
+ uscan --download --repack --compression=xz
--- /dev/null
+3.0 (quilt)
--- /dev/null
+tools/logos/solidrun.bmp
--- /dev/null
+# ARCH subarch platform target
+# --------------------------------------------
+armel - dockstar u-boot.kwb
+
+# Ian Campbell <ijc@debian.org>
+armel - dreamplug u-boot.kwb
+
+# drEagle <drEagle@doukki.net>
+armel - guruplug u-boot.kwb
+
+# Albert ARIBAUD <albert.u.boot@aribaud.net>
+armel - openrd_base u-boot.kwb
+
+# Rick Thomas <rbthomas@rcthomas.org>
+# Albert ARIBAUD <albert.u.boot@aribaud.net>
+armel - openrd_client u-boot.kwb
+
+# Rick Thomas <rbthomas@rcthomas.org>
+# Philip Hands <phil@hands.com>
+armel - openrd_ultimate u-boot.kwb
+
+# Vagrant Cascadian <vagrant@debian.org>, rpi B 256M
+armel rpi rpi u-boot.bin
+
+# drEagle <drEagle@doukki.net>
+# Rick Thomas <rbthomas@rcthomas.org>
+armel - sheevaplug u-boot.kwb
+
+# Ian Campbell <ijc@debian.org>
+armhf exynos arndale u-boot-dtb.bin spl/arndale-spl.bin
+
+# Joost van Zwieten <joostvanzwieten@gmail.com>, Odroid-U3
+armhf exynos odroid u-boot-dtb.bin
+
+# Vagrant Cascadian <vagrant@debian.org>, Odroid-XU4
+armhf exynos odroid-xu3 u-boot-dtb.bin
+
+# Robert Nelson <robertcnelson@gmail.com>
+armhf imx mx53loco u-boot.imx
+
+# Steve Langasek <vorlon@debian.org>, CuBox-i4
+# Vagrant Cascadian <vagrant@debian.org>, CuBox-i4, hummingboard-i1, hummingboard-i2ex
+# Rainer Dorsch <ml@bokomoko.de>, CuBox-i2u (i2u-300-d)
+armhf imx mx6cuboxi u-boot.img spl/u-boot-spl.bin SPL
+
+# Hector Oron <zumbi@debian.org>
+armhf imx nitrogen6q u-boot.imx
+
+# Tony Mancill <tmancill@debian.org>
+armhf imx novena u-boot.img spl/u-boot-spl.bin SPL
+
+# Michael Fladischer <michael@fladi.at>
+armhf imx udoo u-boot.img spl/u-boot-spl.bin SPL
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf imx usbarmory u-boot.imx
+
+# Vagrant Cascadian <vagrant@debian.org>
+# Robert Nelson <robertcnelson@gmail.com>
+armhf imx wandboard u-boot.img spl/u-boot-spl.bin SPL
+
+# Ian Campbell <ijc@debian.org>
+armhf tegra jetson-tk1 u-boot-dtb-tegra.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+# Andrew M.A. Cater <amacater@galactic.demon.co.uk>
+armhf omap am335x_boneblack u-boot.img spl/u-boot-spl.bin MLO
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf omap am57xx_evm u-boot-dtb.img spl/u-boot-spl.bin MLO
+
+# Ben Hutchings <ben.hutchings@codethink.co.uk>
+armhf omap dra74_evm u-boot.img spl/u-boot-spl.bin MLO
+
+# Robert Nelson <robertcnelson@gmail.com>
+armhf omap igep0020 u-boot.img spl/u-boot-spl.bin MLO
+
+armhf omap nokia_rx51 u-boot.bin
+
+# Robert Nelson <robertcnelson@gmail.com>
+armhf omap omap3_beagle u-boot.img spl/u-boot-spl.bin MLO
+
+# Robert Nelson <robertcnelson@gmail.com>
+armhf omap omap4_panda u-boot.img spl/u-boot-spl.bin MLO
+
+# Emilio Pozuelo Monfort <pochu@debian.org>
+# Sjoerd Simons <sjoerd@debian.org>
+armhf rockchip firefly-rk3288 u-boot-dtb.img spl/u-boot-spl-dtb.bin
+
+# Vagrant Cascadian <vagrant@debian.org>, Raspberry PI 2B
+armhf rpi rpi_2 u-boot.bin
+
+# Joey Hess <joeyh@debian.org>
+# Christian Kastner <debian@kvr.at>
+armhf sunxi A10-OLinuXino-Lime u-boot-sunxi-with-spl.bin
+
+# Benedikt Wildenhain <esperanto@benedikt-wildenhain.de>
+armhf sunxi A10s-OLinuXino-M u-boot-sunxi-with-spl.bin
+
+# Karsten Merker <merker@debian.org>
+armhf sunxi A20-Olimex-SOM-EVB u-boot-sunxi-with-spl.bin
+
+# Christian Kastner <debian@kvr.at>
+armhf sunxi A20-OLinuXino-Lime u-boot-sunxi-with-spl.bin
+
+# Karsten Merker <merker@debian.org>
+armhf sunxi A20-OLinuXino-Lime2 u-boot-sunxi-with-spl.bin
+
+# Arne Ploese <aploese@gmx.de>
+armhf sunxi A20-OLinuXino_MICRO u-boot-sunxi-with-spl.bin
+
+# Ian Campbell <ijc@debian.org>
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi Bananapi u-boot-sunxi-with-spl.bin
+
+# Karsten Merker <merker@debian.org>
+armhf sunxi Bananapro u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi Cubieboard u-boot-sunxi-with-spl.bin
+
+# Philip Rinn <rinni@inventati.org>
+# Ian Campbell <ijc@debian.org>
+# Karsten Merker <merker@debian.org>
+armhf sunxi Cubieboard2 u-boot-sunxi-with-spl.bin
+
+# Ian Campbell <ijc@debian.org>
+# Robert Nelson <robertcnelson@gmail.com>
+# Karsten Merker <merker@debian.org>
+armhf sunxi Cubietruck u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>
+armhf sunxi Lamobo_R1 u-boot-sunxi-with-spl.bin
+
+# Robert Hegner <rhegner@hsr.ch>
+armhf sunxi Linksprite_pcDuino u-boot-sunxi-with-spl.bin
+
+# Patrice Go <patgsiosisr@gmail.com>
+armhf sunxi Linksprite_pcDuino3 u-boot-sunxi-with-spl.bin
+
+# Jochen Sprickerhof <debian@jochen.sprickerhof.de>
+armhf sunxi Mini-X u-boot-sunxi-with-spl.bin
+
+# Vagrant Cascadian <vagrant@debian.org>, Orange PI Plus2
+armhf sunxi orangepi_plus u-boot-sunxi-with-spl.bin
+
+# Martin Michlmayr <tbm@cyrius.com>
+arm64 tegra p2371-2180 u-boot-dtb.bin
+
+avr32 - hammerhead u-boot.img
+
+mips - qemu_mips u-boot.bin
+
+sh4 - r2dplus u-boot.bin
+
+sh4 - sh7785lcr_32bit u-boot.bin
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets exynos "doc/README.odroid"
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-exynos [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/arndale/uboot.elf
+u-boot-exynos [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/odroid/uboot.elf
+u-boot-exynos [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/odroid-xu3/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-exynos [armhf]: statically-linked-binary usr/lib/u-boot/arndale/uboot.elf
+u-boot-exynos [armhf]: statically-linked-binary usr/lib/u-boot/odroid/uboot.elf
+u-boot-exynos [armhf]: statically-linked-binary usr/lib/u-boot/odroid-xu3/uboot.elf
+
+u-boot-exynos: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-exynos: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+MX53LOCO:
+
+ dd bs=1024 if=u-boot.imx of=/dev/sdX seek=1
+
+wandboard (quad, dual-lite and solo):
+
+ dd if=/usr/lib/u-boot/wandboard/SPL of=/dev/mmcblk0 bs=1k seek=1
+ dd if=/usr/lib/u-boot/wandboard/u-boot.img of=/dev/mmcblk0 bs=1k seek=69
+
+mx6cuboxi (Cubox-i and Hummingboard):
+
+ dd if=/usr/lib/u-boot/mx6cuboxi/SPL of=/dev/mmcblk0 bs=1k seek=1
+ dd if=/usr/lib/u-boot/mx6cuboxi/u-boot.img of=/dev/mmcblk0 bs=1k seek=69
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets imx
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/mx53loco/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/mx6cuboxi/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/nitrogen6q/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/novena/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/udoo/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/usbarmory/uboot.elf
+u-boot-imx [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/wandboard/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/mx53loco/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/mx6cuboxi/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/nitrogen6q/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/novena/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/udoo/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/usbarmory/uboot.elf
+u-boot-imx [armhf]: statically-linked-binary usr/lib/u-boot/wandboard/uboot.elf
+
+u-boot-imx: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-imx: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+The BeagleBone Black (am335x_boneblack) can be flashed to microSD or eMMC directly:
+
+ dd if=/usr/lib/u-boot/am335x_boneblack/MLO of=/dev/mmcblkX count=1 seek=1 conv=notrunc bs=128k
+ dd if=/usr/lib/u-boot/am335x_boneblack/u-boot.img of=/dev/mmcblkX count=2 seek=1 conv=notrunc bs=384k
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
+
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets omap "doc/README.nokia_rx51"
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/am335x_boneblack/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/am57xx_evm/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/dra74_evm/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/igep0020/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/nokia_rx51/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/omap3_beagle/uboot.elf
+u-boot-omap [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/omap4_panda/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/am335x_boneblack/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/am57xx_evm/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/dra74_evm/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/igep0020/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/nokia_rx51/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/omap3_beagle/uboot.elf
+u-boot-omap [armhf]: statically-linked-binary usr/lib/u-boot/omap4_panda/uboot.elf
+
+u-boot-omap: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-omap: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+doc/README.rockchip
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets rockchip "doc/README.rockchip"
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-rockchip [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/firefly-rk3288/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-rockchip [armhf]: statically-linked-binary usr/lib/u-boot/firefly-rk3288/uboot.elf
+
+u-boot-rockchip: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-rockchip: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets rpi
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-rpi [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/rpi/uboot.elf
+u-boot-rpi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/rpi_2/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-rpi [armel]: statically-linked-binary usr/lib/u-boot/rpi/uboot.elf
+u-boot-rpi [armhf]: statically-linked-binary usr/lib/u-boot/rpi_2/uboot.elf
+
+u-boot-rpi: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-rpi: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+Many sunxi boards (Bananapi, Cubieboard) can be written to SD directly:
+
+ dd if=/usr/lib/u-boot/BOARD/u-boot-sunxi-with-spl.bin of=/dev/mmcblkX bs=1024 seek=8
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets sunxi
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A10-OLinuXino-Lime/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A10s-OLinuXino-M/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-Olimex-SOM-EVB/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-OLinuXino-Lime/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-OLinuXino-Lime2/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/A20-OLinuXino_MICRO/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Bananapi/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Bananapro/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubieboard/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubieboard2/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Cubietruck/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Lamobo_R1/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Linksprite_pcDuino/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Linksprite_pcDuino3/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/Mini-X/uboot.elf
+u-boot-sunxi [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/orangepi_plus/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A10-OLinuXino-Lime/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A10s-OLinuXino-M/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-Olimex-SOM-EVB/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-OLinuXino-Lime/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-OLinuXino-Lime2/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/A20-OLinuXino_MICRO/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Bananapi/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Bananapro/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubieboard/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubieboard2/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Cubietruck/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Lamobo_R1/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Linksprite_pcDuino/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Linksprite_pcDuino3/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/Mini-X/uboot.elf
+u-boot-sunxi [armhf]: statically-linked-binary usr/lib/u-boot/orangepi_plus/uboot.elf
+
+u-boot-sunxi: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-sunxi: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself from a host
+system using the Linux_For_Tegra tools from NVIDIA's developer portal:
+https://developer.nvidia.com/embedded/linux-tegra-archive
+
+=== Jetson TK1 ===
+
+sudo ./flash.sh -L /usr/lib/u-boot/jetson-tk1/u-boot-dtb-tegra.bin jetson-tk1 mmcblk1p1
+
+Please note that L4T R19.3 is currently required (the image does not
+boot if flashed with L4T R21.1 through R21.4).
+
+=== Jetson TX1 ===
+
+sudo ./flash.sh -L /usr/lib/u-boot/p2371-2180/u-boot-dtb.bin jetson-tx1 mmcblk0p1
+
+=== TODO ===
+
+TODO: Figure out how to do this with tools within Debian,
+e.g. tegrarcm and cbootimage.
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets tegra
--- /dev/null
+#!/bin/sh
+
+case $DEB_HOST_GNU_TYPE in
+ aarch64-linux-gnu)
+ echo /usr/lib/u-boot/p2371-2180/uboot.elf /usr/lib/u-boot/p2371-2180/u-boot
+ ;;
+esac
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot-tegra [armhf]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/jetson-tk1/uboot.elf
+u-boot-tegra [arm64]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/p2371-2180/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot-tegra [armhf]: statically-linked-binary usr/lib/u-boot/jetson-tk1/uboot.elf
+u-boot-tegra [arm64]: statically-linked-binary usr/lib/u-boot/p2371-2180/uboot.elf
+
+u-boot-tegra: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot-tegra: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+#!/bin/sh
+
+builddir=debian/build/tools
+for tool in dumpimage mkimage mkenvimage mksunxiboot kwboot env/fw_printenv ; do
+ echo ${builddir}/tools/${tool} /usr/bin/
+done
+
+echo doc/mkimage.1 /usr/share/man/man1/
+echo doc/kwboot.1 /usr/share/man/man1/
+
+# manpages
+echo debian/manpages/fw_printenv.8 /usr/share/man/man8/
+echo debian/manpages/fw_setenv.8 /usr/share/man/man8/
+
+# example env configs
+for env_config in debian/env-configs/*.config ; do
+ echo ${env_config} /usr/share/doc/u-boot-tools/examples/
+done
--- /dev/null
+/usr/bin/fw_printenv /usr/bin/fw_setenv
--- /dev/null
+# Synopsys is the name of a company, not a misspelling.
+u-boot-tools: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+== Installation ==
+
+At this point, you must install U-Boot to flash yourself.
+
+Some examples using mtd-utils:
+
+SheevaPlug:
+
+ sudo flash_erase /dev/mtd0 0 0
+ sudo nandwrite -p /dev/mtd0 /usr/lib/u-boot/sheevaplug/u-boot.kwb
+
+GuruPlug:
+
+ sudo flash_erase /dev/mtd0 0 0
+ sudo nandwrite -p /dev/mtd0 /usr/lib/u-boot/guruplug/u-boot.kwb
+
+DreamPlug:
+
+ At this point you cannot write to the SPI/NOR flash from Linux,
+ so you will need to replace U-Boot from within U-Boot.
+
+== U-Boot environment tools ==
+
+fw_printenv / fw_setenv read /etc/fw_env.config for configuration.
+
--- /dev/null
+#!/bin/sh
+debian/bin/u-boot-install-targets -
--- /dev/null
+
+# There are no file conflicts across architectures for u-boot, as each
+# target is only installed on a single architecture. In theory, some
+# targets could be built on multiple architectures, but could instead install
+# the package for the architecture needed.
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/dockstar/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/dreamplug/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/guruplug/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/openrd_base/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/openrd_client/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/openrd_ultimate/uboot.elf
+u-boot [armel]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/sheevaplug/uboot.elf
+u-boot [avr32]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/hammerhead/uboot.elf
+u-boot [mips]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/qemu_mips/uboot.elf
+u-boot [sh4]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/r2dplus/uboot.elf
+u-boot [sh4]: arch-dependent-file-not-in-arch-specific-directory usr/lib/u-boot/sh7785lcr_32bit/uboot.elf
+
+# These bootloaders need to be statically linked.
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/dockstar/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/dreamplug/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/guruplug/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/openrd_base/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/openrd_client/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/openrd_ultimate/uboot.elf
+u-boot [armel]: statically-linked-binary usr/lib/u-boot/sheevaplug/uboot.elf
+u-boot [avr32]: statically-linked-binary usr/lib/u-boot/hammerhead/uboot.elf
+u-boot [mips]: statically-linked-binary usr/lib/u-boot/qemu_mips/uboot.elf
+u-boot [sh4]: statically-linked-binary usr/lib/u-boot/r2dplus/uboot.elf
+u-boot [sh4]: statically-linked-binary usr/lib/u-boot/sh7785lcr_32bit/uboot.elf
+
+u-boot: description-synopsis-starts-with-article
+
+# Synopsys is the name of a company, not a misspelling.
+u-boot: spelling-error-in-copyright Synopsys Synopsis
--- /dev/null
+version=3
+
+opts=pasv,repacksuffix=+dfsg1,uversionmangle=s/-rc/~rc/g,dversionmangle=s/\+dfsg.*//g \
+ftp://ftp.denx.de/pub/u-boot/u-boot-([\d\.].*)\.tar\.bz2
projects / u-boot.git / commitdiff