--- /dev/null
--- /dev/null
++How to switch between the various BLAS/LAPACK implementations
++=============================================================
++
++- BLAS:
++
++ $ sudo update-alternatives --config libblas.so.3-<multiarch>
++
++- LAPACK:
++
++ $ sudo update-alternatives --config liblapack.so.3-<multiarch>
++
++where <multiarch> is the multiarch path for you architecture (e.g.
++x86_64-linux-gnu for amd64).
++
++More information is available at:
++
++ http://wiki.debian.org/DebianScience/LinearAlgebraLibraries
++
++
++Building an optimized OpenBLAS package for your machine
++=======================================================
++
++On amd64, arm64, i386, ppc64el and ppc64, libopenblas-base provides a multiple
++architecture library. All kernels are included in the library and the one
++matching your architecture is selected at run time. Recompiling locally should
++bring minimal performance improvement.
++
++On the contrary, on other archs, the package is compiled with minimal
++optimizations, so that it can run on all hardware. You may want to recompile it
++locally for optimal performance.
++
++If you want to create a custom OpenBLAS package, optimized for your specific
++machine, proceed as follows.
++
++1) Install the build dependencies and the source of the package:
++
++ $ sudo apt-get build-dep openblas
++ $ apt-get source openblas
++
++2) Compile the package:
++
++ $ cd openblas-<UPSTREAM_VERSION>
++ $ DEB_BUILD_OPTIONS=custom dpkg-buildpackage -uc -b
++
++where <UPSTREAM_VERSION> is replaced with the appropriate value.
++
++3) When the build finishes, it should produce a .deb file, whose precise name
++you can figure out using:
++
++ $ ls ../libopenblas-base_*.deb
++
++Install it using:
++
++ $ sudo dpkg -i ../libopenblas-base_<VERSION>_<ARCH>.deb
++
++replacing <VERSION> and <ARCH> with the appropriate values.
++
++4) If you don't want the Debian package manager to overwrite your optimized
++package with a generic one on system upgrades, you can mark the OpenBLAS
++package to be on hold, with the following command:
++
++ $ sudo aptitude hold libopenblas-base
++
++Don't forget however to periodically check whether a more recent version of the
++package is available for the Debian suite that you are tracking, in which case
++you should go again through this procedure. The version check can be performed
++using:
++
++ $ aptitude versions libopenblas-base
++
++ -- Sébastien Villemot <sebastien@debian.org>, Mon, 8 Jul 2019 14:20:12 +0200
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 31 May 2011 13:56:22 +0200
--- /dev/null
--- /dev/null
++prefix=/usr
++libdir=${prefix}/lib/@DEB_HOST_MULTIARCH@/openblas
++includedir=${prefix}/include/@DEB_HOST_MULTIARCH@
++Name: openblas-blas
++Description: Optimized BLAS (linear algebra) library based on GotoBLAS2
++Version: @DEB_VERSION_UPSTREAM@
++URL: https://github.com/xianyi/OpenBLAS
++Libs: -L${libdir} -lblas
++Libs.private: -L${libdir} -lblas -lgfortran -lpthread -lm
++Cflags: -I${includedir}
--- /dev/null
--- /dev/null
++openblas (0.3.6+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.6+ds
++ * Remove patches applied upstream
++ + skylakex-dgemm.patch
++ + target-generic.patch
++ * Enable dynamic arch selection on ppc64el and ppc64
++ * Bump S-V to 4.4.0
++ * Bump debhelper compat level to 12
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 08 Jul 2019 14:24:15 +0200
++
++openblas (0.3.5+ds-3) unstable; urgency=medium
++
++ * Fix FTBFS when CPU of the build machine is not detected (amd64, arm64, i386)
++ - pass TARGET=GENERIC when building with DYNAMIC_ARCH=1
++ - target-generic.patch: new patch taken from upstream, makes the above
++ possible
++ (Closes: #923607)
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 11 Mar 2019 10:18:39 +0100
++
++openblas (0.3.5+ds-2) unstable; urgency=medium
++
++ * skylakex-dgemm.patch: new patch, fixes DGEMM regression on SkylakeX.
++ Thanks to Mo Zhou (Closes: #921698)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 09 Feb 2019 10:38:22 +0100
++
++openblas (0.3.5+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.5+ds
++ * Bump S-V to 4.3.0
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 04 Jan 2019 10:28:31 +0100
++
++openblas (0.3.4+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.4+ds
++ * d/copyright: reflect upstream changes
++ * Dynamic kernel selection is now implemented on arm64
++ * Switch to new way of specifying debhelper compat level
++ * Increase priority in alternatives system to 100 (Closes: #911131)
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 07 Dec 2018 15:49:27 +0100
++
++openblas (0.3.3+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.3+ds
++ * Bump Standards-Version to 4.2.1
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 07 Sep 2018 16:32:43 +0200
++
++openblas (0.3.2+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.2+ds
++ + fixes regression that induced incorrect SVD computation
++ (Closes: #903659)
++ * Bump to debhelper compat level 11
++ * Add Rules-Requires-Root: no
++ * Bump S-V to 4.1.5
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 31 Jul 2018 18:28:12 +0200
++
++openblas (0.3.1+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.3.1
++ + cblas_* now take a void* for complex arrays (Closes: #877883)
++ * d/copyright: reflect upstream changes
++ * force-zarch.patch: remove patch, applied upstream
++ * Compile with DYNAMIC_OLDER=1, for better support of old amd64 CPUs
++ * Remove Built-Using field.
++ Since both LAPACK and ATLAS are under BSD-3-clause, there is no reason to
++ use this field (which is now restricted to license compliance issues).
++ * d/rules: remove get-orig-source target.
++ * Bump to S-V 4.1.4
++ * Replace ADTTMP by AUTOPKGTEST_TMP in tests.
++ * Ship *.md files in libopenblas-dev
++ * Update Vcs-* fields for move to salsa
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 04 Jul 2018 10:53:01 +0200
++
++openblas (0.2.20+ds-4) unstable; urgency=medium
++
++ * Add support for s390x.
++ New patch force-zarch.patch introduced to force the generic build.
++ (Closes: #875618)
++ * Enforce TARGET=POWER6 on ppc64, to avoid FTBFS on some buildds.
++ * Drop obsolete code for -dbgsym migration.
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 19 Sep 2017 14:51:23 +0200
++
++openblas (0.2.20+ds-3) unstable; urgency=low
++
++ * Multi-archify the package.
++ Incidentally, remove the dependency of libopenblas-dev on libblas-dev, since
++ cblas.h is now managed by the alternative.
++ * Ship openblas.pc in libopenblas-dev.
++ * Improve README.Debian for building a custom package
++ * Bump Standards-Version to 4.1.0.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 09 Sep 2017 10:29:44 +0200
++
++openblas (0.2.20+ds-2) unstable; urgency=medium
++
++ * d/rules: explicitly disable OpenMP, with USE_OPENMP=0.
++ Otherwise it gets enabled on powerpc and ppc64*, leading to FTBFS.
++
++ -- Sébastien Villemot <sebastien@debian.org> Thu, 27 Jul 2017 20:06:14 +0200
++
++openblas (0.2.20+ds-1) unstable; urgency=medium
++
++ * New upstream version 0.2.20+ds
++ * d/watch: add +ds suffix to orig tarball, since we're repacking it.
++ * Drop patches applied upstream:
++ + mips-implement-mb-and-wmb.patch
++ + mips-remove-incorrect-blas_lock-implementation.patch
++ * d/copyright:
++ + reflect upstream changes, filter out relapack.
++ + use secure URL for format.
++ * Add support for sparc64.
++ Thanks to James Clarke for the patch (Closes: #866509)
++ * d/rules: Re-enable testsuite on powerpc.
++ Treating powerpc differently is not warranted, especially since it is no
++ longer a release architecture.
++ * Use DEB_BUILD_OPTIONS=custom as new interface for building custom package.
++ By the way, no longer automatically append a changelog entry.
++ (Closes: #854784)
++ * d/control:
++ + bump Standards-Version to 4.0.0.
++ + tighten versioned build-dependency on liblapack-pic to ≥ 3.7.0.
++ + use canonical URL for Vcs-Browser.
++
++ -- Sébastien Villemot <sebastien@debian.org> Thu, 27 Jul 2017 18:17:19 +0200
++
++openblas (0.2.19-3) unstable; urgency=medium
++
++ * New patches that fix threading issue on mips64el.
++ + d/p/mips-implement-mb-and-wmb.patch
++ + d/p/mips-remove-incorrect-blas_lock-implementation.patch
++ Thanks to James Cowgill (Closes: #861486)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 06 May 2017 15:22:06 +0200
++
++openblas (0.2.19-2) unstable; urgency=medium
++
++ * Also build libopenblas-dev on mips64el. (Closes: #852283)
++ * Bump debhelper compat level to 10.
++ * d/watch: bump to format version 4.
++ * Add "-march=native -mtune=native" to CFLAGS when building custom package.
++ (Closes: #844509)
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 23 Jan 2017 15:06:15 +0100
++
++openblas (0.2.19-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.19
++ * d/p/always-run-testsuite.patch: drop patch, no longer needed.
++ * Add support for mips64el.
++ * d/p/order-files.patch: new patch, makes build reproducible.
++ Thanks to Alexis Bienvenüe (Closes: #824639)
++ * d/README.Debian: explain that recompilation is useful on non-x86 archs.
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 06 Sep 2016 20:24:32 +0200
++
++openblas (0.2.18-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.18
++ * d/control: bump Standards-Version to 3.9.8, no changes needed.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 17 Apr 2016 18:40:31 +0200
++
++openblas (0.2.17-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.17
++ * d/copyright: reflect upstream changes.
++ * d/p/power-arch-detection.patch: drop patch, applied upstream.
++ * d/p/matgen-symbols-not-included.patch: new patch.
++ Needed because MATGEN symbols are not included in the Debian binary.
++ * d/control:
++ + bump Standards-Version to 3.9.7, no changes needed.
++ + use secure URLs in Vcs-* fields.
++ * Drop libopenblas-dbg, now rely on automatic debug package.
++
++ -- Sébastien Villemot <sebastien@debian.org> Thu, 24 Mar 2016 15:11:45 +0100
++
++openblas (0.2.15-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.15
++ * debian/copyright: reflect upstream changes.
++ * Remove patches applied upstream:
++ + debian/patches/arm-arch-detection.patch
++ + debian/patches/arm64.patch
++ + debian/patches/disable-gemm3m-tests.patch
++ * Build on ppc64el arch, which is now supported by upstream.
++ * d/p/power-arch-detection.patch: new patch.
++ Ensures that the testsuite is run on ppc64el and ppc64.
++ However, don't enable it on powerpc, because it crashes…
++ * Tighten B-D on lapack to >= 3.5.0-5~, in order to get latest patches.
++ * Remove obsolete Conflicts/Replaces against lib{blas,lapack}3gf.
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 10 Nov 2015 23:24:12 +0100
++
++openblas (0.2.14-1) unstable; urgency=low
++
++ * Imported Upstream version 0.2.14
++ * debian/copyright: reflect upstream changes.
++ * debian/rules: remove TARGET=GENERIC flag when building dynamic arch binary.
++ This flag creates a compilation failure and seems no longer needed.
++ * Add a debug package. (Closes: #783639)
++ * debian/control: improve short description of packages.
++ * Add autopkgtest support, relying on upstream testsuite.
++ + debian/tests/upstream-testsuite: script to run the testsuite.
++ + debian/tests/control: add the new test.
++ Thanks to Christian Kastner for crafting the patch. (Closes: #781996)
++ * Enable build on arm64 architecture.
++ + d/control: add arm64 to Architecture fields.
++ + d/rules: use TARGET=ARMV8 for arm64 arch.
++ + d/p/arm64.patch: new patch from upstream, to fix a build failure.
++ * Fix crash with illegal instruction on armhf with static libraries.
++ + d/p/arm-gcc-flags.patch: enforce -march=armv7-a and -mfpu=vfpv3-d16 flags.
++ * Add -lgfortran and -lpthread in .pc files for static linking.
++ * Ensure that the testsuite is run on arm* arches at build time.
++ + d/p/arm-arch-detection.patch: new patch, avoids false detection of
++ cross-compilation.
++ + d/p/disable-gemm3m-tests.patch: new patch, avoid compilation failure of
++ the testsuite.
++ + d/p/test-custom-package.patch renamed to d/p/always-run-testsuite.patch,
++ to clearly show that it is needed even for vanilla arm* packages.
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 29 Apr 2015 18:46:11 +0200
++
++openblas (0.2.12-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.12. (Closes: #765795)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 26 Oct 2014 10:42:29 +0100
++
++openblas (0.2.11-3) unstable; urgency=medium
++
++ [ Alastair McKinstry ]
++ * Add {blas,lapack}-openblas.pc files and symlinks via
++ update-alternatives. (Closes: #764491)
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 15 Oct 2014 21:54:50 +0200
++
++openblas (0.2.11-2) unstable; urgency=medium
++
++ * libopenblas-base: add dependency on libblas-common.
++ The goal is to make BLAS implementations multi-arch safe by preventing the
++ co-installability of, say, libblas3:amd64 and libatlas3-base:i386. See
++ * Bump Standards-Version to 3.9.6, no changes needed.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 27 Sep 2014 20:25:40 +0200
++
++openblas (0.2.11-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.11
++ * debian/copyright: reflect upstream changes.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 30 Aug 2014 14:20:55 +0200
++
++openblas (0.2.10-2) unstable; urgency=medium
++
++ * libopenblas-{base,dev}.prerm: fix removal of liblapack.so.3 alternative.
++ * debian/rules: pass the same make options to all make invocations.
++ Fixes FTBFS on armhf.
++ * Tighten build-dep on liblapack-pic.
++ Ensures that the LAPACK version used to compile OpenBLAS is as recent as
++ upstream embedded copy (including unreleased patches).
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 08 Aug 2014 14:25:37 +0200
++
++openblas (0.2.10-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.10
++ * Ship the optimized LAPACK as a new alternative.
++ + Use the binary from liblapack-pic for routines not overridden by
++ OpenBLAS.
++ As a consequence, add a Built-Using field to libopenblas-{base,dev}.
++ + libblas3-soname.patch: dropped patch.
++ + shared-blas-lapack.patch: new patch.
++ * Ship headers in /usr/include/openblas.
++ * Remove Sylvestre Ledru from Uploaders. Thanks Sylvestre for your work!
++ * debian/copyright: rewrite using machine-readable format.
++ * Use Files-Excluded from d/copyright to remove embedded LAPACK copy.
++ * no-embedded-lapack.patch: new patch.
++ Adapts build system for the absence of lapack-netlib/ directory.
++ * kfreebsd.patch: install shared library and link it against libm.
++ This patch also incorporates the former content of kfreebsd-soname.patch.
++ * Rewrite using debhelper and upstream's 'make install' rule.
++ * Update README.Debian.
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 05 Aug 2014 20:05:26 +0200
++
++openblas (0.2.9-1) unstable; urgency=medium
++
++ * Imported Upstream version 0.2.9
++ * Remove patches applied upstream:
++ - dgemv-crash.patch
++ - fork-handler.patch
++ - qemu-athlon.patch
++ - wrong-parameter-for-zherk-zher2.patch
++ * Add armhf support.
++ - Use ARMv6 target. We cannot currently use the ARMv7 target, because it
++ requires VFPv3-D32 (and armhf only guarantees VFPv3-D16).
++ - arm-gcc-flags.patch: Remove arch-specific GCC flags.
++ * PowerPC: enforce a generic-enough target (PPCG4) for the generic package.
++ Previously, the target was (erroneously) selected based on the buildd
++ hardware.
++ * Update debian/orig-tar.sh: now keeps a quasi-empty lapack-netlib/TESTING
++ dir.
++
++ -- Sébastien Villemot <sebastien@debian.org> Sun, 15 Jun 2014 15:17:05 +0200
++
++openblas (0.2.8-6) unstable; urgency=medium
++
++ * Team upload.
++ * backport two fixes from upstream git:
++ - dgemv-crash.patch: fixes core2/barcelona dgemv kernel
++ - wrong-parameter-for-zherk-zher2.patch
++
++ -- Julian Taylor <jtaylor.debian@googlemail.com> Thu, 13 Mar 2014 20:03:07 +0100
++
++openblas (0.2.8-5) unstable; urgency=medium
++
++ * kfreebsd-soname.patch: give a SONAME to the shared library under kfreebsd,
++ by using the same stanza to create the shared object than under Linux.
++ Incidentally, this fixes the FTBFS on kfreebsd-* archs.
++ * Remove ia64, powerpcspe, hurd-i386 and sparc from the list of
++ supported architectures (the package never compiled on those).
++ * fork-handler.patch: improved version backported from upstream.
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 21 Feb 2014 18:07:32 +0100
++
++openblas (0.2.8-4) unstable; urgency=medium
++
++ * Revert to pthreads parallelism instead of OpenMP (Closes: #737675)
++ * remove-openmp-warning.patch: new patch, removes annoying warning when
++ OpenBLAS is called from an OpenMP application.
++ * fork-handler.patch: fixes hangs of OpenBLAS when called from a program
++ using OpenMP (Closes: #739331)
++ * Drop obsolete code in maintainer scripts to deal with the transition
++ libblas.so.3gf => libblas.so.3.
++ * Ship an additional libopenblas.so.0 in /usr/lib, to allow direct
++ linking to OpenBLAS, without using the alternatives system for BLAS
++ implementations. Thanks to Martin Koehler for his help in crafting a
++ proper solution. (Closes: #725673)
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 19 Feb 2014 17:20:03 +0100
++
++openblas (0.2.8-3) unstable; urgency=medium
++
++ * Use OpenMP parallelism instead of pthreads (Closes: #684344).
++ * Bump Standards-Version to 3.9.5, no changes needed.
++ * Bump to debhelper compat level 9.
++
++ -- Sébastien Villemot <sebastien@debian.org> Wed, 15 Jan 2014 14:07:39 +0100
++
++openblas (0.2.8-2) unstable; urgency=low
++
++ * qemu-athlon.patch: new patch, should fix FTBFS on babin.debian.org
++ (which is a weird qemu guest declaring an Athlon CPU but without
++ 3dnow! extensions)
++
++ -- Sébastien Villemot <sebastien@debian.org> Tue, 27 Aug 2013 18:04:04 +0200
++
++openblas (0.2.8-1) unstable; urgency=low
++
++ * New upstream release
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 03 Aug 2013 23:25:41 +0200
++
++openblas (0.2.7-1) unstable; urgency=low
++
++ * New upstream release
++ * power7.patch: remove patch, applied upstream
++ * Repackage upstream tarball without embedded LAPACK copy
++ * Package descriptions: mention that multiple arch is only for x86; fix typo
++ * Use canonical URLs for packaging VCS
++ * Add dependency of libopenblas-dev on libblas-dev, so that CBLAS headers are
++ installed. (Closes: #685890)
++ * Disable memory address range benchmarking (NO_WARMUP=1), for better
++ startup performance. (Closes: #709224)
++ * test-custom-package.patch: new package, ensures that testsuite is run even
++ when building a custom package. (Closes: #677866)
++
++ -- Sébastien Villemot <sebastien@debian.org> Fri, 26 Jul 2013 18:37:41 +0200
++
++openblas (0.2.6-2) unstable; urgency=low
++
++ * power7.patch: new patch, should fix FTBFS on powerpc buildd with Power7 arch
++ * libblas3-soname.patch: new patch, sets the SONAME of the dynamic library to
++ libblas.so.3. (Closes: #687349)
++ * Put "libblas3 | libblas.so.3" in the shlibs of libopenblas-base.
++ Packages compiled with libopenblas-dev installed will now have a BLAS
++ dependency satisfiable by all BLAS flavours.
++ * Switch to git as VCS for packaging
++
++ -- Sébastien Villemot <sebastien@debian.org> Mon, 20 May 2013 18:40:07 +0200
++
++openblas (0.2.6-1) unstable; urgency=low
++
++ * Upload to unstable
++ * Update Standards-Version to 3.9.4
++ * Increase the maximum number of threads to 64 when building the generic
++ package. At runtime, OpenBLAS will not use more threads than there are
++ available cores. (LP: #817212)
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 02 Mar 2013 17:46:01 +0100
++
++openblas (0.2.6-1~exp1) experimental; urgency=low
++
++ * New upstream release
++ + Fixes use of uninitialized values in vectorized sgemv on i386.
++ (Closes: #696000)
++ + Fixes the overflowing buffer bug of gemv. (Closes: #697231)
++ + Fixes the the overflowing buffer bug of multithreading hbmv and sbmv.
++ (Closes: #697232)
++ + Fixes crash on 32-bit Athlon CPUs. (Closes: #697233)
++ + Better handling of unknown amd64 CPUs (e.g. within qemu).
++ (Closes: #697235)
++ * Disable processor affinity. (Closes: #684338)
++ * Force the maximum number of threads to 2 when building the generic package
++ (as we do for ATLAS). Otherwise, it is the number of cores on the build
++ machine which is chosen instead.
++ * README.Debian: improve instructions for building the custom package
++
++ -- Sébastien Villemot <sebastien@debian.org> Sat, 02 Mar 2013 15:09:09 +0100
++
++openblas (0.2.5-1~exp1) experimental; urgency=low
++
++ [ Sébastien Villemot ]
++ * Update debian/watch
++ * Use my @debian.org email address
++ * Remove obsolete DM-Upload-Allowed flag
++
++ [ Sylvestre Ledru ]
++ * New upstream release
++ * generic_profile.diff removed (applied upstream)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 08 Dec 2012 16:24:30 +0100
++
++openblas (0.2.4-1~exp1) experimental; urgency=low
++
++ * New upstream release
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 15 Oct 2012 20:15:49 +0200
++
++openblas (0.2.3-1~exp1) experimental; urgency=low
++
++ * New upstream release
++ + Kills threads when unloading the library (Closes: #673061)
++
++ -- Sébastien Villemot <sebastien.villemot@ens.fr> Mon, 20 Aug 2012 12:18:07 +0000
++
++openblas (0.2.2-1~exp1) experimental; urgency=low
++
++ * New upstream release
++ * hurd.diff, hurd_gettid.diff, kfreebsd.diff, sparc.diff: remove patches,
++ applied upstream
++ * debian/rules: implement support for DEB_BUILD_OPTIONS=noopt
++
++ -- Sébastien Villemot <sebastien.villemot@ens.fr> Wed, 11 Jul 2012 16:32:27 +0000
++
++openblas (0.2.1-1~exp1) experimental; urgency=low
++
++ * New upstream release
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 02 Jul 2012 02:24:00 +0200
++
++openblas (0.1.1-5) unstable; urgency=low
++
++ * libopenblas-base.prerm: avoid crash if libblas.so.3gf already deleted
++ * Add myself to Uploaders
++ * Set DM-Upload-Allowed to yes
++
++ -- Sébastien Villemot <sebastien.villemot@ens.fr> Sun, 24 Jun 2012 16:15:11 +0000
++
++openblas (0.1.1-4) unstable; urgency=low
++
++ * Fix the FTBFS under KFreebsd. Thanks to Sébastien Villemot (Closes: #677165)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 13 Jun 2012 10:29:51 +0200
++
++openblas (0.1.1-3) unstable; urgency=low
++
++ * Upload in unstable
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 02 Jun 2012 17:33:58 +0200
++
++openblas (0.1.1-3~exp4) experimental; urgency=low
++
++ * Rollback previous upload
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 01 Jun 2012 11:04:51 +0200
++
++openblas (0.1.1-3~exp3) experimental; urgency=low
++
++ * Fix a bad alternative link to the old library name
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 01 Jun 2012 10:28:09 +0200
++
++openblas (0.1.1-3~exp2) experimental; urgency=low
++
++ * Fix FTBFS (Closes: #666277)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 30 May 2012 14:52:40 +0200
++
++openblas (0.1.1-3~exp1) experimental; urgency=low
++
++ * Replaces and Breaks updated against the right versions of other impacted
++ packages
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 21 May 2012 13:13:46 +0200
++
++openblas (0.1.1-2) experimental; urgency=low
++
++ * Moved removal from postinst to preinst
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 18 May 2012 15:58:32 +0200
++
++openblas (0.1.1-1) experimental; urgency=low
++
++ * New upstream release
++ * Remove libblas.so.3gf references before the install
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 14 May 2012 18:47:53 +0200
++
++openblas (0.1.0-1) experimental; urgency=low
++
++ * New upstream release
++ * Standards-Version updated to 3.9.3
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 04 Apr 2012 14:31:34 +0200
++
++openblas (0.1alpha2.5-1~exp2) experimental; urgency=low
++
++ * Join modifications with blas, lapack, atlas and openblas.
++ Declare the replacements of all *3gf blas & lapack implementation
++ (See bug #660607)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 20 Feb 2012 19:33:41 +0100
++
++openblas (0.1alpha2.5-1~exp1) experimental; urgency=low
++
++ * New upstream release
++ * Fix an upgrade issue (Closes: #659786)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sun, 19 Feb 2012 15:50:41 +0100
++
++openblas (0.1alpha2.3-1~exp1) experimental; urgency=low
++
++ * New upstream release
++ Fix FTBFS under KfreeBSD (Closes: #635552)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 05 Sep 2011 15:24:24 +0200
++
++openblas (0.1alpha2.2-4~exp1) experimental; urgency=low
++
++ * Rename the reference libblas.so.3gf to libblas.so.3
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 03 Sep 2011 20:24:39 +0200
++
++openblas (0.1alpha2.2-3) unstable; urgency=low
++
++ * Same player try again: the lib has different names with build with the
++ dynamic arch or not.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 26 Jul 2011 18:40:04 +0200
++
++openblas (0.1alpha2.2-2) unstable; urgency=low
++
++ * Disable dynamic arch on non amd64 / i386 archs (Closes: #631887)
++ * Fix a FTBFS under hurd
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Tue, 26 Jul 2011 16:56:27 +0200
++
++openblas (0.1alpha2.2-1) unstable; urgency=low
++
++ * New upstream release (Closes: #631886)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 25 Jul 2011 10:46:44 +0200
++
++openblas (0.1alpha2.1-1) unstable; urgency=low
++
++ * New upstream release
++ * gfortran added a build dep
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 29 Jun 2011 21:18:48 +0200
++
++openblas (0.1alpha2-1) unstable; urgency=low
++
++ * New upstream release
++ * Good news: use DYNAMIC_ARCH=1 in the build option of OpenBLAS/Gotoblas
++ to support multiple architecture. All kernel will be included in the library
++ and dynamically switched the best architecture at run time.
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Thu, 23 Jun 2011 10:44:43 +0200
++
++openblas (0.1alpha1-4) experimental; urgency=low
++
++ * Fix FTBFS under kfreebsd, sparc & hurd.
++ * Limit architectures to amd64 i386 ia64 powerpc powerpcspe ppc64
++ kfreebsd-i386 kfreebsd-amd64 hurd-i386 sparc
++ * cherry-pick from upstream to fail build when the arch is not supported
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Mon, 30 May 2011 17:05:23 +0200
++
++openblas (0.1alpha1-3) experimental; urgency=low
++
++ * clean target now really cleans everything. Thanks to Ryan Lovett
++ (Closes: #624253)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Wed, 04 May 2011 18:03:10 +0200
++
++openblas (0.1alpha1-2) experimental; urgency=low
++
++ * Update the README.Debian file
++ * watch file removed for now (it was the one from atlas)
++ * Fix a custom build issue (thanks to Ryan Lovett for the bug report)
++ * Fix a FTBFS under sparc
++ * Switch to dpkg-source 3.0 (quilt) format
++ * Standards-Version updated to version 3.9.2
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Sat, 16 Apr 2011 15:23:22 +0200
++
++openblas (0.1alpha1-1) experimental; urgency=low
++
++ * Initial version (Closes: #605456)
++
++ -- Sylvestre Ledru <sylvestre@debian.org> Fri, 04 Feb 2011 18:28:26 +0100
--- /dev/null
--- /dev/null
++Source: openblas
++Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
++Uploaders: Sébastien Villemot <sebastien@debian.org>
++Section: devel
++Priority: optional
++Build-Depends: debhelper-compat (= 12),
++ dh-exec,
++ gfortran,
++ liblapack-pic (>= 3.7.1-2~)
++Standards-Version: 4.4.0
++Vcs-Browser: https://salsa.debian.org/science-team/openblas
++Vcs-Git: https://salsa.debian.org/science-team/openblas.git
++Homepage: https://github.com/xianyi/OpenBLAS
++Rules-Requires-Root: no
++
++Package: libopenblas-base
++Architecture: amd64 arm64 armhf i386 powerpc ppc64el ppc64 kfreebsd-i386 kfreebsd-amd64 mips64el sparc64 s390x
++Multi-Arch: same
++Section: libs
++Depends: ${shlibs:Depends},
++ ${misc:Depends}
++Breaks: libblas3 (<< 3.7.1-2~),
++ liblapack3 (<< 3.7.1-2~),
++ libatlas3-base (<< 3.10.3-4~),
++ libopenblas-dev (<< 0.2.20+ds-3~)
++Provides: libblas.so.3,
++ liblapack.so.3
++Description: Optimized BLAS (linear algebra) library (shared library)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ Unlike Atlas, OpenBLAS provides a multiple architecture library.
++ .
++ All kernel will be included in the library and dynamically switched to the
++ best architecture at run time (only on amd64, arm64, i386, ppc64el and ppc64).
++ .
++ For more information on how to rebuild locally OpenBLAS, see the section:
++ "Building Optimized OpenBLAS Packages on your ARCH" in README.Debian
++
++Package: libopenblas-dev
++Architecture: amd64 arm64 armhf i386 powerpc ppc64el ppc64 kfreebsd-i386 kfreebsd-amd64 mips64el sparc64 s390x
++Multi-Arch: same
++Section: libdevel
++Depends: libopenblas-base (= ${binary:Version}),
++ ${shlibs:Depends},
++ ${misc:Depends}
++Breaks: libblas-dev (<< 3.7.1-2~),
++ liblapack-dev (<< 3.7.1-2~),
++ libatlas-base-dev (<< 3.10.3-4~)
++Provides: libblas.so,
++ liblapack.so
++Description: Optimized BLAS (linear algebra) library (development files)
++ OpenBLAS is an optimized BLAS library based on GotoBLAS2 1.13 BSD version.
++ .
++ Unlike Atlas, OpenBLAS provides a multiple architecture library.
++ .
++ All kernel will be included in the library and dynamically switched to
++ the best architecture at run time (only on amd64, arm64 and i386).
++ .
++ This package includes the static libraries and symbolic links
++ needed for program development.
--- /dev/null
--- /dev/null
++Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
++Upstream-Name: OpenBLAS
++Upstream-Contact: Zhang Xianyi <traits.zhang@gmail.com>
++Source: https://github.com/xianyi/OpenBLAS
++Files-Excluded: lapack-netlib/*
++ relapack/*
++
++Files: *
++Copyright: 2011-2018 The OpenBLAS Project
++ 2009-2010 The University of Texas at Austin
++ 2013 Martin Koehler, grisuthedragon@users.github.com
++License: BSD-3-clause
++ Redistribution and use in source and binary forms, with or without
++ modification, are permitted provided that the following conditions are
++ met:
++ .
++ 1. Redistributions of source code must retain the above copyright
++ notice, this list of conditions and the following disclaimer.
++ .
++ 2. Redistributions in binary form must reproduce the above copyright
++ notice, this list of conditions and the following disclaimer in
++ the documentation and/or other materials provided with the
++ distribution.
++ 3. Neither the name of the OpenBLAS project nor the names of
++ its contributors may be used to endorse or promote products
++ derived from this software without specific prior written
++ permission.
++ .
++ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
++ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
++ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
++ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
++ OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++
++Files: benchmark/cholesky.c
++ benchmark/linpack.c
++ benchmark/geev.c
++ benchmark/getri.c
++ benchmark/gesv.c
++ benchmark/potrf.c
++ common.h
++ common_alpha.h
++ common_ia64.h
++ common_interface.h
++ common_lapack.h
++ common_level1.h
++ common_level2.h
++ common_level3.h
++ common_linux.h
++ common_macro.h
++ common_param.h
++ common_power.h
++ common_sparc.h
++ common_thread.h
++ common_x86.h
++ common_x86_64.h
++ cpuid.h
++ cpuid_alpha.c
++ cpuid_ia64.c
++ cpuid_power.c
++ cpuid_sparc.c
++ cpuid_x86.c
++ driver/level2/gbmv_k.c
++ driver/level2/gbmv_thread.c
++ driver/level2/gemv_thread.c
++ driver/level2/ger_thread.c
++ driver/level2/sbmv_k.c
++ driver/level2/sbmv_thread.c
++ driver/level2/spmv_k.c
++ driver/level2/spmv_thread.c
++ driver/level2/spr2_k.c
++ driver/level2/spr2_thread.c
++ driver/level2/spr_k.c
++ driver/level2/spr_thread.c
++ driver/level2/symv_thread.c
++ driver/level2/syr2_k.c
++ driver/level2/syr2_thread.c
++ driver/level2/syr_k.c
++ driver/level2/syr_thread.c
++ driver/level2/tbmv_L.c
++ driver/level2/tbmv_U.c
++ driver/level2/tbmv_thread.c
++ driver/level2/tbsv_L.c
++ driver/level2/tbsv_U.c
++ driver/level2/tpmv_L.c
++ driver/level2/tpmv_U.c
++ driver/level2/tpmv_thread.c
++ driver/level2/tpsv_L.c
++ driver/level2/tpsv_U.c
++ driver/level2/trmv_L.c
++ driver/level2/trmv_U.c
++ driver/level2/trmv_thread.c
++ driver/level2/trsv_L.c
++ driver/level2/trsv_U.c
++ driver/level2/zgbmv_k.c
++ driver/level2/zhbmv_k.c
++ driver/level2/zher2_k.c
++ driver/level2/zher_k.c
++ driver/level2/zhpmv_k.c
++ driver/level2/zhpr2_k.c
++ driver/level2/zhpr_k.c
++ driver/level2/zsbmv_k.c
++ driver/level2/zspmv_k.c
++ driver/level2/zspr2_k.c
++ driver/level2/zspr_k.c
++ driver/level2/zsyr2_k.c
++ driver/level2/zsyr_k.c
++ driver/level2/ztbmv_L.c
++ driver/level2/ztbmv_U.c
++ driver/level2/ztbsv_L.c
++ driver/level2/ztbsv_U.c
++ driver/level2/ztpmv_L.c
++ driver/level2/ztpmv_U.c
++ driver/level2/ztpsv_L.c
++ driver/level2/ztpsv_U.c
++ driver/level2/ztrmv_L.c
++ driver/level2/ztrmv_U.c
++ driver/level2/ztrsv_L.c
++ driver/level2/ztrsv_U.c
++ driver/level3/gemm.c
++ driver/level3/gemm3m.c
++ driver/level3/gemm_thread_m.c
++ driver/level3/gemm_thread_mn.c
++ driver/level3/gemm_thread_n.c
++ driver/level3/gemm_thread_variable.c
++ driver/level3/level3_gemm3m_thread.c
++ driver/level3/level3_syrk_threaded.c
++ driver/level3/level3_thread.c
++ driver/level3/symm_k.c
++ driver/level3/syr2k_k.c
++ driver/level3/syr2k_kernel.c
++ driver/level3/syrk_k.c
++ driver/level3/syrk_kernel.c
++ driver/level3/syrk_thread.c
++ driver/level3/trmm_L.c
++ driver/level3/trmm_R.c
++ driver/level3/trsm_L.c
++ driver/level3/trsm_R.c
++ driver/level3/zhemm_k.c
++ driver/level3/zher2k_k.c
++ driver/level3/zher2k_kernel.c
++ driver/level3/zherk_beta.c
++ driver/level3/zherk_k.c
++ driver/level3/zherk_kernel.c
++ driver/level3/zsyrk_beta.c
++ driver/mapper/mapper.c
++ driver/others/abs.c
++ driver/others/blas_l1_thread.c
++ driver/others/blas_server_omp.c
++ driver/others/blas_server_win32.c
++ driver/others/divtable.c
++ driver/others/dynamic.c
++ driver/others/dynamic_arm64.c
++ driver/others/lamc3.c
++ driver/others/lamch.c
++ driver/others/lsame.c
++ driver/others/memory_qalloc.c
++ driver/others/parameter.c
++ driver/others/profile.c
++ driver/others/xerbla.c
++ exports/dllinit.c
++ interface/asum.c
++ interface/axpy.c
++ interface/copy.c
++ interface/dot.c
++ interface/dsdot.c
++ interface/gbmv.c
++ interface/geadd.c
++ interface/gemm.c
++ interface/gemv.c
++ interface/ger.c
++ interface/imax.c
++ interface/lapack/gesv.c
++ interface/lapack/getf2.c
++ interface/lapack/getrf.c
++ interface/lapack/getrs.c
++ interface/lapack/laswp.c
++ interface/lapack/lauu2.c
++ interface/lapack/lauum.c
++ interface/lapack/potf2.c
++ interface/lapack/potrf.c
++ interface/lapack/potri.c
++ interface/lapack/trti2.c
++ interface/lapack/trtri.c
++ interface/lapack/zgetf2.c
++ interface/lapack/zgetrf.c
++ interface/lapack/zgetrs.c
++ interface/lapack/zlaswp.c
++ interface/lapack/zlauu2.c
++ interface/lapack/zlauum.c
++ interface/lapack/zpotf2.c
++ interface/lapack/zpotrf.c
++ interface/lapack/zpotri.c
++ interface/lapack/ztrti2.c
++ interface/lapack/ztrtri.c
++ interface/max.c
++ interface/nrm2.c
++ interface/rot.c
++ interface/sbmv.c
++ interface/scal.c
++ interface/sdsdot.c
++ interface/spmv.c
++ interface/spr.c
++ interface/spr2.c
++ interface/swap.c
++ interface/symm.c
++ interface/symv.c
++ interface/syr.c
++ interface/syr2.c
++ interface/syr2k.c
++ interface/syrk.c
++ interface/tbmv.c
++ interface/tbsv.c
++ interface/tpmv.c
++ interface/tpsv.c
++ interface/trmv.c
++ interface/trsm.c
++ interface/trsv.c
++ interface/zaxpy.c
++ interface/zdot.c
++ interface/zgbmv.c
++ interface/zgeadd.c
++ interface/zgemv.c
++ interface/zger.c
++ interface/zhbmv.c
++ interface/zhemv.c
++ interface/zher.c
++ interface/zher2.c
++ interface/zhpmv.c
++ interface/zhpr.c
++ interface/zhpr2.c
++ interface/zrot.c
++ interface/zsbmv.c
++ interface/zscal.c
++ interface/zspmv.c
++ interface/zspr.c
++ interface/zspr2.c
++ interface/zswap.c
++ interface/zsymv.c
++ interface/zsyr.c
++ interface/zsyr2.c
++ interface/ztbmv.c
++ interface/ztbsv.c
++ interface/ztpmv.c
++ interface/ztpsv.c
++ interface/ztrmv.c
++ interface/ztrsv.c
++ kernel/generic/cabs.c
++ kernel/generic/gemm_beta.c
++ kernel/generic/gemm_ncopy_1.c
++ kernel/generic/gemm_ncopy_16.c
++ kernel/generic/gemm_ncopy_2.c
++ kernel/generic/gemm_ncopy_4.c
++ kernel/generic/gemm_ncopy_6.c
++ kernel/generic/gemm_ncopy_8.c
++ kernel/generic/gemm_tcopy_1.c
++ kernel/generic/gemm_tcopy_16.c
++ kernel/generic/gemm_tcopy_2.c
++ kernel/generic/gemm_tcopy_4.c
++ kernel/generic/gemm_tcopy_6.c
++ kernel/generic/gemm_tcopy_8.c
++ kernel/generic/ger.c
++ kernel/generic/laswp_ncopy_1.c
++ kernel/generic/laswp_ncopy_2.c
++ kernel/generic/laswp_ncopy_4.c
++ kernel/generic/laswp_ncopy_8.c
++ kernel/generic/lsame.c
++ kernel/generic/neg_tcopy_1.c
++ kernel/generic/neg_tcopy_16.c
++ kernel/generic/neg_tcopy_2.c
++ kernel/generic/neg_tcopy_4.c
++ kernel/generic/neg_tcopy_8.c
++ kernel/generic/symm_lcopy_1.c
++ kernel/generic/symm_lcopy_16.c
++ kernel/generic/symm_lcopy_2.c
++ kernel/generic/symm_lcopy_4.c
++ kernel/generic/symm_lcopy_6.c
++ kernel/generic/symm_lcopy_8.c
++ kernel/generic/symm_ucopy_1.c
++ kernel/generic/symm_ucopy_16.c
++ kernel/generic/symm_ucopy_2.c
++ kernel/generic/symm_ucopy_4.c
++ kernel/generic/symm_ucopy_6.c
++ kernel/generic/symm_ucopy_8.c
++ kernel/generic/symv_k.c
++ kernel/generic/trmm_lncopy_1.c
++ kernel/generic/trmm_lncopy_16.c
++ kernel/generic/trmm_lncopy_2.c
++ kernel/generic/trmm_lncopy_4.c
++ kernel/generic/trmm_lncopy_6.c
++ kernel/generic/trmm_lncopy_8.c
++ kernel/generic/trmm_ltcopy_1.c
++ kernel/generic/trmm_ltcopy_16.c
++ kernel/generic/trmm_ltcopy_2.c
++ kernel/generic/trmm_ltcopy_4.c
++ kernel/generic/trmm_ltcopy_6.c
++ kernel/generic/trmm_ltcopy_8.c
++ kernel/generic/trmm_uncopy_1.c
++ kernel/generic/trmm_uncopy_16.c
++ kernel/generic/trmm_uncopy_2.c
++ kernel/generic/trmm_uncopy_4.c
++ kernel/generic/trmm_uncopy_6.c
++ kernel/generic/trmm_uncopy_8.c
++ kernel/generic/trmm_utcopy_1.c
++ kernel/generic/trmm_utcopy_16.c
++ kernel/generic/trmm_utcopy_2.c
++ kernel/generic/trmm_utcopy_4.c
++ kernel/generic/trmm_utcopy_6.c
++ kernel/generic/trmm_utcopy_8.c
++ kernel/generic/trsm_kernel_LN.c
++ kernel/generic/trsm_kernel_LT.c
++ kernel/generic/trsm_kernel_RN.c
++ kernel/generic/trsm_kernel_RT.c
++ kernel/generic/trsm_lncopy_1.c
++ kernel/generic/trsm_lncopy_16.c
++ kernel/generic/trsm_lncopy_2.c
++ kernel/generic/trsm_lncopy_4.c
++ kernel/generic/trsm_lncopy_6.c
++ kernel/generic/trsm_lncopy_8.c
++ kernel/generic/trsm_ltcopy_1.c
++ kernel/generic/trsm_ltcopy_16.c
++ kernel/generic/trsm_ltcopy_2.c
++ kernel/generic/trsm_ltcopy_4.c
++ kernel/generic/trsm_ltcopy_6.c
++ kernel/generic/trsm_ltcopy_8.c
++ kernel/generic/trsm_uncopy_1.c
++ kernel/generic/trsm_uncopy_16.c
++ kernel/generic/trsm_uncopy_2.c
++ kernel/generic/trsm_uncopy_4.c
++ kernel/generic/trsm_uncopy_6.c
++ kernel/generic/trsm_uncopy_8.c
++ kernel/generic/trsm_utcopy_1.c
++ kernel/generic/trsm_utcopy_16.c
++ kernel/generic/trsm_utcopy_2.c
++ kernel/generic/trsm_utcopy_4.c
++ kernel/generic/trsm_utcopy_6.c
++ kernel/generic/trsm_utcopy_8.c
++ kernel/generic/zgemm3m_ncopy_1.c
++ kernel/generic/zgemm3m_ncopy_2.c
++ kernel/generic/zgemm3m_ncopy_4.c
++ kernel/generic/zgemm3m_ncopy_8.c
++ kernel/generic/zgemm3m_tcopy_1.c
++ kernel/generic/zgemm3m_tcopy_2.c
++ kernel/generic/zgemm3m_tcopy_4.c
++ kernel/generic/zgemm3m_tcopy_8.c
++ kernel/generic/zgemm_beta.c
++ kernel/generic/zgemm_ncopy_1.c
++ kernel/generic/zgemm_ncopy_2.c
++ kernel/generic/zgemm_ncopy_4.c
++ kernel/generic/zgemm_ncopy_8.c
++ kernel/generic/zgemm_tcopy_1.c
++ kernel/generic/zgemm_tcopy_2.c
++ kernel/generic/zgemm_tcopy_4.c
++ kernel/generic/zgemm_tcopy_8.c
++ kernel/generic/zger.c
++ kernel/generic/zhemm3m_lcopy_1.c
++ kernel/generic/zhemm3m_lcopy_2.c
++ kernel/generic/zhemm3m_lcopy_4.c
++ kernel/generic/zhemm3m_lcopy_8.c
++ kernel/generic/zhemm3m_ucopy_1.c
++ kernel/generic/zhemm3m_ucopy_2.c
++ kernel/generic/zhemm3m_ucopy_4.c
++ kernel/generic/zhemm3m_ucopy_8.c
++ kernel/generic/zhemm_ltcopy_1.c
++ kernel/generic/zhemm_ltcopy_2.c
++ kernel/generic/zhemm_ltcopy_4.c
++ kernel/generic/zhemm_ltcopy_8.c
++ kernel/generic/zhemm_utcopy_1.c
++ kernel/generic/zhemm_utcopy_2.c
++ kernel/generic/zhemm_utcopy_4.c
++ kernel/generic/zhemm_utcopy_8.c
++ kernel/generic/zhemv_k.c
++ kernel/generic/zlaswp_ncopy_1.c
++ kernel/generic/zlaswp_ncopy_2.c
++ kernel/generic/zlaswp_ncopy_4.c
++ kernel/generic/zneg_tcopy_1.c
++ kernel/generic/zneg_tcopy_2.c
++ kernel/generic/zneg_tcopy_4.c
++ kernel/generic/zneg_tcopy_8.c
++ kernel/generic/zsymm3m_lcopy_1.c
++ kernel/generic/zsymm3m_lcopy_2.c
++ kernel/generic/zsymm3m_lcopy_4.c
++ kernel/generic/zsymm3m_lcopy_8.c
++ kernel/generic/zsymm3m_ucopy_1.c
++ kernel/generic/zsymm3m_ucopy_2.c
++ kernel/generic/zsymm3m_ucopy_4.c
++ kernel/generic/zsymm3m_ucopy_8.c
++ kernel/generic/zsymm_lcopy_1.c
++ kernel/generic/zsymm_lcopy_2.c
++ kernel/generic/zsymm_lcopy_4.c
++ kernel/generic/zsymm_lcopy_8.c
++ kernel/generic/zsymm_ucopy_1.c
++ kernel/generic/zsymm_ucopy_2.c
++ kernel/generic/zsymm_ucopy_4.c
++ kernel/generic/zsymm_ucopy_8.c
++ kernel/generic/zsymv_k.c
++ kernel/generic/ztrmm_lncopy_1.c
++ kernel/generic/ztrmm_lncopy_2.c
++ kernel/generic/ztrmm_lncopy_4.c
++ kernel/generic/ztrmm_lncopy_8.c
++ kernel/generic/ztrmm_ltcopy_1.c
++ kernel/generic/ztrmm_ltcopy_2.c
++ kernel/generic/ztrmm_ltcopy_4.c
++ kernel/generic/ztrmm_ltcopy_8.c
++ kernel/generic/ztrmm_uncopy_1.c
++ kernel/generic/ztrmm_uncopy_2.c
++ kernel/generic/ztrmm_uncopy_4.c
++ kernel/generic/ztrmm_uncopy_8.c
++ kernel/generic/ztrmm_utcopy_1.c
++ kernel/generic/ztrmm_utcopy_2.c
++ kernel/generic/ztrmm_utcopy_4.c
++ kernel/generic/ztrmm_utcopy_8.c
++ kernel/generic/ztrsm_lncopy_1.c
++ kernel/generic/ztrsm_lncopy_2.c
++ kernel/generic/ztrsm_lncopy_4.c
++ kernel/generic/ztrsm_lncopy_8.c
++ kernel/generic/ztrsm_ltcopy_1.c
++ kernel/generic/ztrsm_ltcopy_2.c
++ kernel/generic/ztrsm_ltcopy_4.c
++ kernel/generic/ztrsm_ltcopy_8.c
++ kernel/generic/ztrsm_uncopy_1.c
++ kernel/generic/ztrsm_uncopy_2.c
++ kernel/generic/ztrsm_uncopy_4.c
++ kernel/generic/ztrsm_uncopy_8.c
++ kernel/generic/ztrsm_utcopy_1.c
++ kernel/generic/ztrsm_utcopy_2.c
++ kernel/generic/ztrsm_utcopy_4.c
++ kernel/generic/ztrsm_utcopy_8.c
++ kernel/power/lock.c
++ kernel/setparam-ref.c
++ kernel/x86_64/dger.c
++ kernel/x86_64/sger.c
++ kernel/x86_64/ctrsm_kernel_LN_bulldozer.c
++ kernel/x86_64/ctrsm_kernel_LT_bulldozer.c
++ kernel/x86_64/ctrsm_kernel_RN_bulldozer.c
++ kernel/x86_64/ctrsm_kernel_RT_bulldozer.c
++ kernel/x86_64/dgemm_beta_skylakex.c
++ kernel/x86_64/dgemm_kernel_16x2_skylakex.S
++ kernel/x86_64/dgemm_ncopy_8_skylakex.c
++ kernel/x86_64/dgemm_tcopy_8_skylakex.c
++ kernel/x86_64/dtrsm_kernel_LN_bulldozer.c
++ kernel/x86_64/dtrsm_kernel_RN_haswell.c
++ kernel/x86_64/dtrsm_kernel_RT_bulldozer.c
++ kernel/x86_64/sgemm_beta_skylakex.c
++ kernel/x86_64/sgemm_ncopy_4_skylakex.c
++ kernel/x86_64/sgemm_tcopy_16_skylakex.c
++ kernel/x86_64/strsm_kernel_LN_bulldozer.c
++ kernel/x86_64/strsm_kernel_LT_bulldozer.c
++ kernel/x86_64/strsm_kernel_RN_bulldozer.c
++ kernel/x86_64/strsm_kernel_RT_bulldozer.c
++ kernel/x86_64/ztrsm_kernel_LN_bulldozer.c
++ kernel/x86_64/ztrsm_kernel_LT_bulldozer.c
++ kernel/x86_64/ztrsm_kernel_RN_bulldozer.c
++ kernel/x86_64/ztrsm_kernel_RT_bulldozer.c
++ lapack/getf2/getf2_k.c
++ lapack/getf2/zgetf2_k.c
++ lapack/getrf/getrf_parallel.c
++ lapack/getrf/getrf_parallel_omp.c
++ lapack/getrf/getrf_single.c
++ lapack/getrf/potrf_parallel.c
++ lapack/getrs/getrs_parallel.c
++ lapack/getrs/getrs_single.c
++ lapack/getrs/zgetrs_parallel.c
++ lapack/getrs/zgetrs_single.c
++ lapack/laswp/generic/laswp_k.c
++ lapack/laswp/generic/laswp_k_1.c
++ lapack/laswp/generic/laswp_k_2.c
++ lapack/laswp/generic/laswp_k_4.c
++ lapack/laswp/generic/laswp_k_8.c
++ lapack/laswp/generic/zlaswp_k.c
++ lapack/laswp/generic/zlaswp_k_1.c
++ lapack/laswp/generic/zlaswp_k_2.c
++ lapack/laswp/generic/zlaswp_k_4.c
++ lapack/lauu2/lauu2_L.c
++ lapack/lauu2/lauu2_U.c
++ lapack/lauu2/zlauu2_L.c
++ lapack/lauu2/zlauu2_U.c
++ lapack/lauum/lauum_L_parallel.c
++ lapack/lauum/lauum_L_single.c
++ lapack/lauum/lauum_U_parallel.c
++ lapack/lauum/lauum_U_single.c
++ lapack/potf2/potf2_L.c
++ lapack/potf2/potf2_U.c
++ lapack/potf2/zpotf2_L.c
++ lapack/potf2/zpotf2_U.c
++ lapack/potrf/potrf_L_parallel.c
++ lapack/potrf/potrf_L_single.c
++ lapack/potrf/potrf_U_parallel.c
++ lapack/potrf/potrf_U_single.c
++ lapack/potrf/potrf_parallel.c
++ lapack/trti2/trti2_L.c
++ lapack/trti2/trti2_U.c
++ lapack/trti2/ztrti2_L.c
++ lapack/trti2/ztrti2_U.c
++ lapack/trtri/trtri_L_parallel.c
++ lapack/trtri/trtri_U_parallel.c
++ symcopy.h
++ driver/level3/gemm3m_level3.c
++ driver/level3/hemm3m_k.c
++ driver/level3/symm3m_k.c
++ driver/level3/level3.c
++ driver/level3/level3_syrk.c
++ driver/level3/level3_syr2k.c
++Copyright: 2009-2010 The University of Texas at Austin
++License: BSD-2-clause-texas
++ 1. Redistributions of source code must retain the above
++ copyright notice, this list of conditions and the following
++ disclaimer.
++ .
++ 2. Redistributions in binary form must reproduce the above
++ copyright notice, this list of conditions and the following
++ disclaimer in the documentation and/or other materials
++ provided with the distribution.
++ .
++ THIS SOFTWARE IS PROVIDED BY THE UNIVERSITY OF TEXAS AT
++ AUSTIN ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
++ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
++ DISCLAIMED. IN NO EVENT SHALL THE UNIVERSITY OF TEXAS AT
++ AUSTIN OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
++ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
++ GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
++ BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
++ OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
++ POSSIBILITY OF SUCH DAMAGE.
++ .
++ The views and conclusions contained in the software and
++ documentation are those of the authors and should not be
++ interpreted as representing official policies, either expressed
++ or implied, of The University of Texas at Austin.
++
++Files: ctest/* reference/* test/*
++Copyright: none
++License: public-domain
++ These files come from netlib.org and are in the public domain.
++
++Files: utest/ctest.h
++Copyright: 2011-2016 Bas van den Berg
++License: Apache-2.0
++ Licensed under the Apache License, Version 2.0 (the "License");
++ you may not use this file except in compliance with the License.
++ You may obtain a copy of the License at
++ .
++ http://www.apache.org/licenses/LICENSE-2.0
++ .
++ Unless required by applicable law or agreed to in writing, software
++ distributed under the License is distributed on an "AS IS" BASIS,
++ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
++ See the License for the specific language governing permissions and
++ limitations under the License.
++ .
++ On Debian systems, the complete text of the Apache License,
++ version 2.0, can be found in the file
++ `/usr/share/common-licenses/Apache-2.0'.
++
++Files: debian/*
++Copyright: 2011-2012 Sylvestre Ledru <sylvestre@debian.org>
++ 2012-2018 Sébastien Villemot <sebastien@debian.org>
++License: BSD-2-clause
++ 1. Redistributions of source code must retain the above
++ copyright notice, this list of conditions and the following
++ disclaimer.
++ .
++ 2. Redistributions in binary form must reproduce the above
++ copyright notice, this list of conditions and the following
++ disclaimer in the documentation and/or other materials
++ provided with the distribution.
++ .
++ THIS SOFTWARE IS PROVIDED BY THE UNIVERSITY OF TEXAS AT
++ AUSTIN ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
++ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
++ DISCLAIMED. IN NO EVENT SHALL THE UNIVERSITY OF TEXAS AT
++ AUSTIN OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
++ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
++ GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
++ BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
++ OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
++ POSSIBILITY OF SUCH DAMAGE.
--- /dev/null
--- /dev/null
++prefix=/usr
++libdir=${prefix}/lib/@DEB_HOST_MULTIARCH@/openblas
++includedir=${prefix}/include/@DEB_HOST_MULTIARCH@
++Name: openblas-lapack
++Description: Optimized BLAS (linear algebra) library, LAPACK
++Version: @DEB_VERSION_UPSTREAM@
++URL: https://github.com/xianyi/OpenBLAS
++Libs: -L${libdir} -llapack
++Libs.private: -L${libdir} -llapack -lgfortran -lpthread -lm
++Cflags: -I${includedir}
--- /dev/null
--- /dev/null
++#!/usr/bin/dh-exec
++
++usr/lib/*/libopenblas*-r0.*.so
++usr/lib/*/libopenblas.so.0
++interface/libblas.so.3 usr/lib/${DEB_HOST_MULTIARCH}/openblas/
++interface/liblapack.so.3 usr/lib/${DEB_HOST_MULTIARCH}/openblas/
--- /dev/null
--- /dev/null
++#! /bin/sh
++
++set -e
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/libblas.so.3 \
++ libblas.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/openblas/libblas.so.3 100
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/liblapack.so.3 \
++ liblapack.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/openblas/liblapack.so.3 100
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++# Cleanup pre-multiarch alternative
++if [ "$1" = "upgrade" ] && dpkg --compare-versions "$2" lt 0.2.20+ds-3~
++then
++ update-alternatives --remove libblas.so.3 /usr/lib/openblas-base/libblas.so.3
++ update-alternatives --remove liblapack.so.3 /usr/lib/openblas-base/liblapack.so.3
++fi
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++if [ "$1" != "upgrade" ]
++then
++ update-alternatives --remove libblas.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/openblas/libblas.so.3
++
++ update-alternatives --remove liblapack.so.3-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/openblas/liblapack.so.3
++fi
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++libopenblas 0 libopenblas-base
++libblas 3 libblas3 | libblas.so.3
++liblapack 3 liblapack3 | liblapack.so.3
--- /dev/null
--- /dev/null
++README.md
++USAGE.md
++CONTRIBUTORS.md
++BACKERS.md
--- /dev/null
--- /dev/null
++#!/usr/bin/dh-exec
++
++usr/lib/*/libopenblas*.a
++usr/lib/*/libopenblas.so
++usr/lib/*/pkgconfig/openblas.pc
++usr/include/*
++debian/*.pc /usr/lib/${DEB_HOST_MULTIARCH}/pkgconfig
--- /dev/null
--- /dev/null
++#!/usr/bin/dh-exec
++
++usr/lib/${DEB_HOST_MULTIARCH}/libopenblas.a usr/lib/${DEB_HOST_MULTIARCH}/openblas/libblas.a
++usr/lib/${DEB_HOST_MULTIARCH}/libopenblas.a usr/lib/${DEB_HOST_MULTIARCH}/openblas/liblapack.a
++usr/lib/${DEB_HOST_MULTIARCH}/openblas/libblas.so.3 usr/lib/${DEB_HOST_MULTIARCH}/openblas/libblas.so
++usr/lib/${DEB_HOST_MULTIARCH}/openblas/liblapack.so.3 usr/lib/${DEB_HOST_MULTIARCH}/openblas/liblapack.so
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/libblas.so libblas.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/openblas/libblas.so 100 \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/libblas.a libblas.a-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/openblas/libblas.a \
++ --slave /usr/include/@DEB_HOST_MULTIARCH@/cblas.h cblas.h-@DEB_HOST_MULTIARCH@ \
++ /usr/include/@DEB_HOST_MULTIARCH@/cblas-openblas.h \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/blas.pc \
++ blas.pc-@DEB_HOST_MULTIARCH@ /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/blas-openblas.pc
++
++update-alternatives --install /usr/lib/@DEB_HOST_MULTIARCH@/liblapack.so \
++ liblapack.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/openblas/liblapack.so 100 \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/liblapack.a liblapack.a-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/openblas/liblapack.a \
++ --slave /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/lapack.pc \
++ lapack.pc-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/pkgconfig/lapack-openblas.pc
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++# Cleanup pre-multiarch alternative
++if [ "$1" = "upgrade" ] && dpkg --compare-versions "$2" lt 0.2.20+ds-3~
++then
++ update-alternatives --remove libblas.so /usr/lib/openblas-base/libblas.so
++ update-alternatives --remove liblapack.so /usr/lib/openblas-base/liblapack.so
++fi
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++#!/bin/sh
++
++set -e
++
++if [ "$1" != "upgrade" ]
++then
++ update-alternatives --remove libblas.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/openblas/libblas.so
++
++ update-alternatives --remove liblapack.so-@DEB_HOST_MULTIARCH@ \
++ /usr/lib/@DEB_HOST_MULTIARCH@/openblas/liblapack.so
++fi
++
++#DEBHELPER#
++
++exit 0
--- /dev/null
--- /dev/null
++Description: Use flags suitable for armhf port when TARGET=ARMV6
++ See debian/rules for an explanation of why we can't use TARGET=ARMV7 on armhf.
++ Also, if we don't explicitly set the -march and -mfpu flags, the resulting
++ static libraries crash with SIGILL (reason not yet elucidated).
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: not-needed
++Last-Update: 2015-04-29
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/Makefile.arm
+++++ b/Makefile.arm
++@@ -9,8 +9,8 @@ endif
++ endif
++
++ ifeq ($(CORE), ARMV6)
++-CCOMMON_OPT += -mfpu=vfp -march=armv6
++-FCOMMON_OPT += -mfpu=vfp -march=armv6
+++CCOMMON_OPT += -mfpu=vfpv3-d16 -march=armv7-a
+++FCOMMON_OPT += -mfpu=vfpv3-d16 -march=armv7-a
++ endif
++
++ ifeq ($(CORE), ARMV5)
--- /dev/null
--- /dev/null
++Description: Various fixes for kFreeBSD shared library
++ Under kFreeBSD, give a SONAME to the shared library and install it. Also link
++ it against libm.
++ Simply use the same code as Linux for all these operations.
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: not-needed
++Last-Update: 2014-08-05
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/exports/Makefile
+++++ b/exports/Makefile
++@@ -122,7 +122,7 @@ endif
++ dllinit.$(SUFFIX) : dllinit.c
++ $(CC) $(CFLAGS) -c -o $(@F) -s $<
++
++-ifeq ($(OSNAME), $(filter $(OSNAME),Linux SunOS Android Haiku))
+++ifeq ($(OSNAME), $(filter $(OSNAME),Linux SunOS Android Haiku FreeBSD))
++
++ so : ../$(LIBSONAME)
++
++@@ -167,7 +167,7 @@ endif
++ endif
++
++ #http://stackoverflow.com/questions/7656425/makefile-ifeq-logical-or
++-ifeq ($(OSNAME), $(filter $(OSNAME),FreeBSD OpenBSD NetBSD DragonFly))
+++ifeq ($(OSNAME), $(filter $(OSNAME),OpenBSD NetBSD DragonFly))
++
++ so : ../$(LIBSONAME)
++
++--- a/Makefile.install
+++++ b/Makefile.install
++@@ -67,14 +67,14 @@ endif
++ #for install shared library
++ ifneq ($(NO_SHARED),1)
++ @echo Copying the shared library to $(DESTDIR)$(OPENBLAS_LIBRARY_DIR)
++-ifeq ($(OSNAME), $(filter $(OSNAME),Linux SunOS Android Haiku))
+++ifeq ($(OSNAME), $(filter $(OSNAME),Linux SunOS Android Haiku FreeBSD))
++ @install -pm755 $(LIBSONAME) "$(DESTDIR)$(OPENBLAS_LIBRARY_DIR)"
++ @cd "$(DESTDIR)$(OPENBLAS_LIBRARY_DIR)" ; \
++ ln -fs $(LIBSONAME) $(LIBPREFIX).so ; \
++ ln -fs $(LIBSONAME) $(LIBPREFIX).so.$(MAJOR_VERSION)
++ endif
++
++-ifeq ($(OSNAME), $(filter $(OSNAME),FreeBSD OpenBSD NetBSD DragonFly))
+++ifeq ($(OSNAME), $(filter $(OSNAME),OpenBSD NetBSD DragonFly))
++ @cp $(LIBSONAME) "$(DESTDIR)$(OPENBLAS_LIBRARY_DIR)"
++ @cd "$(DESTDIR)$(OPENBLAS_LIBRARY_DIR)" ; \
++ ln -fs $(LIBSONAME) $(LIBPREFIX).so
++--- a/Makefile.system
+++++ b/Makefile.system
++@@ -277,7 +277,7 @@ ifeq ($(OSNAME), NetBSD)
++ MD5SUM = md5 -n
++ endif
++
++-ifeq ($(OSNAME), Linux)
+++ifeq ($(OSNAME), $(filter $(OSNAME),Linux FreeBSD))
++ EXTRALIB += -lm
++ NO_EXPRECISION = 1
++ endif
--- /dev/null
--- /dev/null
++Description: MATGEN symbols are not included in Debian binary
++ The libopenblas binaries do not include libmatgen code, so don't mark them as
++ exported and don't test for their presence (in linktest).
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: not-needed
++Last-Update: 2016-03-24
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/exports/gensymbol
+++++ b/exports/gensymbol
++@@ -495,24 +495,6 @@
++ cggsvp3,
++ cgsvj0,
++ cgsvj1,
++- clagge,
++- claghe,
++- clagsy,
++- clahilb,
++- clakf2,
++- clarge,
++- clarnd,
++- claror,
++- clarot,
++- clatm1,
++- clatm2,
++- clatm3,
++- clatm5,
++- clatm6,
++- clatme,
++- clatmr,
++- clatms,
++- clatmt,
++ cpotrf2,
++ csbmv,
++ cspr2,
++@@ -527,25 +509,6 @@
++ dggsvd3,
++ dggsvp3,
++ dladiv2,
++- dlagge,
++- dlagsy,
++- dlahilb,
++- dlakf2,
++- dlaran,
++- dlarge,
++- dlarnd,
++- dlaror,
++- dlarot,
++- dlatm1,
++- dlatm2,
++- dlatm3,
++- dlatm5,
++- dlatm6,
++- dlatm7,
++- dlatme,
++- dlatmr,
++- dlatms,
++- dlatmt,
++ dorm22,
++ dpotrf2,
++ dsecnd,
++@@ -559,25 +522,6 @@
++ sggsvd3,
++ sggsvp3,
++ sladiv2,
++- slagge,
++- slagsy,
++- slahilb,
++- slakf2,
++- slaran,
++- slarge,
++- slarnd,
++- slaror,
++- slarot,
++- slatm1,
++- slatm2,
++- slatm3,
++- slatm5,
++- slatm6,
++- slatm7,
++- slatme,
++- slatmr,
++- slatms,
++- slatmt,
++ sorm22,
++ spotrf2,
++ zgejsv,
++@@ -591,24 +535,6 @@
++ zggsvp3,
++ zgsvj0,
++ zgsvj1,
++- zlagge,
++- zlaghe,
++- zlagsy,
++- zlahilb,
++- zlakf2,
++- zlarge,
++- zlarnd,
++- zlaror,
++- zlarot,
++- zlatm1,
++- zlatm2,
++- zlatm3,
++- zlatm5,
++- zlatm6,
++- zlatme,
++- zlatmr,
++- zlatms,
++- zlatmt,
++ zpotrf2,
++ zsbmv,
++ zspr2,
--- /dev/null
--- /dev/null
++Description: Adapt build system for the absence of lapack-netlib/ and relapack directories.
++ Instead use the binary provided by package liblapack-pic, stripping from it the
++ symbols that are overridden by OpenBLAS.
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: not-needed
++Last-Update: 2017-07-27
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/Makefile
+++++ b/Makefile
++@@ -216,75 +216,14 @@ hpl_p :
++ fi; \
++ done
++
++-ifeq ($(NO_LAPACK), 1)
++ netlib :
+++ mkdir lapack-netlib
+++ cd lapack-netlib && ar -x /usr/lib/$$(dpkg-architecture -q DEB_HOST_MULTIARCH)/liblapack_pic.a
+++ make -C interface delete-duplicate-lapack-objects
+++ ar -ru $(LIBNAME) lapack-netlib/*
++
++-else
++-netlib : lapack_prebuild
++-ifeq ($(NOFORTRAN), $(filter 0,$(NOFORTRAN)))
++- @$(MAKE) -C $(NETLIB_LAPACK_DIR) lapacklib
++- @$(MAKE) -C $(NETLIB_LAPACK_DIR) tmglib
++-endif
++-ifndef NO_LAPACKE
++- @$(MAKE) -C $(NETLIB_LAPACK_DIR) lapackelib
++-endif
++-endif
++-
++-ifeq ($(NO_LAPACK), 1)
++-re_lapack :
++-
++-else
++-re_lapack :
++- @$(MAKE) -C relapack
++-endif
++-
++-prof_lapack : lapack_prebuild
++- @$(MAKE) -C $(NETLIB_LAPACK_DIR) lapack_prof
++-
++-lapack_prebuild :
++-ifeq ($(NOFORTRAN), $(filter 0,$(NOFORTRAN)))
++- -@echo "FORTRAN = $(FC)" > $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "OPTS = $(LAPACK_FFLAGS)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "POPTS = $(LAPACK_FPFLAGS)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "NOOPT = -O0 $(LAPACK_NOOPT)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "PNOOPT = $(LAPACK_FPFLAGS) -O0" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "LOADOPTS = $(FFLAGS) $(EXTRALIB)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "CC = $(CC)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "override CFLAGS = $(LAPACK_CFLAGS)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "override ARCH = $(AR)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "ARCHFLAGS = $(ARFLAGS) -ru" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "RANLIB = $(RANLIB)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "LAPACKLIB = ../$(LIBNAME)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "TMGLIB = ../$(LIBNAME)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "BLASLIB = ../../../$(LIBNAME)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "LAPACKELIB = ../$(LIBNAME)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "LAPACKLIB_P = ../$(LIBNAME_P)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "SUFFIX = $(SUFFIX)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "PSUFFIX = $(PSUFFIX)" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "CEXTRALIB = $(EXTRALIB)" >> $(NETLIB_LAPACK_DIR)/make.inc
++-ifeq ($(F_COMPILER), GFORTRAN)
++- -@echo "TIMER = INT_ETIME" >> $(NETLIB_LAPACK_DIR)/make.inc
++-ifdef SMP
++-ifeq ($(OSNAME), WINNT)
++- -@echo "LOADER = $(FC)" >> $(NETLIB_LAPACK_DIR)/make.inc
++-else ifeq ($(OSNAME), Haiku)
++- -@echo "LOADER = $(FC)" >> $(NETLIB_LAPACK_DIR)/make.inc
++-else
++- -@echo "LOADER = $(FC) -pthread" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++-else
++- -@echo "LOADER = $(FC)" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++-else
++- -@echo "TIMER = NONE" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@echo "LOADER = $(FC)" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++-ifeq ($(BUILD_LAPACK_DEPRECATED), 1)
++- -@echo "BUILD_DEPRECATED = 1" >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
++- -@echo "LAPACKE_WITH_TMG = 1" >> $(NETLIB_LAPACK_DIR)/make.inc
++- -@cat make.inc >> $(NETLIB_LAPACK_DIR)/make.inc
++-endif
+++clean::
+++ rm -rf lapack-netlib
++
++ large.tgz :
++ ifeq ($(NOFORTRAN), $(filter 0,$(NOFORTRAN)))
++@@ -350,10 +289,5 @@ ifeq ($(OSNAME), Darwin)
++ @rm -rf getarch.dSYM getarch_2nd.dSYM
++ endif
++ @rm -f Makefile.conf config.h Makefile_kernel.conf config_kernel.h st* *.dylib
++- @touch $(NETLIB_LAPACK_DIR)/make.inc
++- @$(MAKE) -C $(NETLIB_LAPACK_DIR) clean
++- @rm -f $(NETLIB_LAPACK_DIR)/make.inc $(NETLIB_LAPACK_DIR)/lapacke/include/lapacke_mangling.h
++- @$(MAKE) -C relapack clean
++ @rm -f *.grd Makefile.conf_last config_last.h
++- @(cd $(NETLIB_LAPACK_DIR)/TESTING && rm -f x* *.out testing_results.txt)
++ @echo Done.
++--- a/Makefile.system
+++++ b/Makefile.system
++@@ -20,8 +20,6 @@ else ifeq ($(ARCH), aarch64)
++ override ARCH=arm64
++ endif
++
++-NETLIB_LAPACK_DIR = $(TOPDIR)/lapack-netlib
++-
++ # Default C compiler
++ # - Only set if not specified on the command line or inherited from the environment.
++ # - CC is an implicit variable so neither '?=' or 'ifndef' can be used.
++--- a/interface/Makefile
+++++ b/interface/Makefile
++@@ -2198,3 +2198,9 @@ cblas_zgeadd.$(SUFFIX) cblas_zgeadd.$(PS
++
++ cblas_xerbla.$(SUFFIX) cblas_xerbla.$(PSUFFIX) : xerbla.c
++ $(CC) -c $(CFLAGS) -DCBLAS $< -o $(@F)
+++
+++# The list of symbols to be removed can be seen in the diff between LAPACK's
+++# original SRC/Makefile and the version of that same file that is included in
+++# OpenBLAS (unfiltered) tarball
+++delete-duplicate-lapack-objects:
+++ cd ../lapack-netlib && rm $(SLAPACKOBJS) $(DLAPACKOBJS) $(CLAPACKOBJS) $(ZLAPACKOBJS) lsame.o xerbla.o
++--- a/Makefile.install
+++++ b/Makefile.install
++@@ -49,14 +49,6 @@ ifndef NO_CBLAS
++ endif
++
++ ifneq ($(OSNAME), AIX)
++-ifndef NO_LAPACKE
++- @echo Copying LAPACKE header files to $(DESTDIR)$(OPENBLAS_INCLUDE_DIR)
++- @-install -pm644 $(NETLIB_LAPACK_DIR)/LAPACKE/include/lapacke.h "$(DESTDIR)$(OPENBLAS_INCLUDE_DIR)/lapacke.h"
++- @-install -pm644 $(NETLIB_LAPACK_DIR)/LAPACKE/include/lapacke_config.h "$(DESTDIR)$(OPENBLAS_INCLUDE_DIR)/lapacke_config.h"
++- @-install -pm644 $(NETLIB_LAPACK_DIR)/LAPACKE/include/lapacke_mangling_with_flags.h.in "$(DESTDIR)$(OPENBLAS_INCLUDE_DIR)/lapacke_mangling.h"
++- @-install -pm644 $(NETLIB_LAPACK_DIR)/LAPACKE/include/lapacke_utils.h "$(DESTDIR)$(OPENBLAS_INCLUDE_DIR)/lapacke_utils.h"
++-endif
++-
++ #for install static library
++ ifneq ($(NO_STATIC),1)
++ @echo Copying the static library to $(DESTDIR)$(OPENBLAS_LIBRARY_DIR)
--- /dev/null
--- /dev/null
++Description: Order files
++ Order the files when calling `ar' or $(CC), to make the build reproducible.
++Author: Alexis Bienvenüe <pado@passoire.fr>
++Bugs-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=824639
++Reviewed-by: Sébastien Villemot <sebastien@debian.org>
++Last-Update: 2016-09-06
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/Makefile
+++++ b/Makefile
++@@ -220,7 +220,7 @@ netlib :
++ mkdir lapack-netlib
++ cd lapack-netlib && ar -x /usr/lib/$$(dpkg-architecture -q DEB_HOST_MULTIARCH)/liblapack_pic.a
++ make -C interface delete-duplicate-lapack-objects
++- ar -ru $(LIBNAME) lapack-netlib/*
+++ ar -ru $(LIBNAME) `LC_ALL=C ls lapack-netlib/*`
++
++ clean::
++ rm -rf lapack-netlib
++--- a/interface/Makefile
+++++ b/interface/Makefile
++@@ -2215,7 +2215,7 @@ libblas.so.3: $(SBLAS1OBJS) $(SBLAS2OBJS
++
++ # The prerequisites must match the symbols deleted in target delete-duplicate-lapack-objects
++ liblapack.so.3: $(SLAPACKOBJS) $(DLAPACKOBJS) $(CLAPACKOBJS) $(ZLAPACKOBJS) ../kernel/lsame.o ../driver/others/xerbla.o
++- $(CC) $(LDFLAGS) -shared -o $@ $^ ../lapack-netlib/* -Wl,-soname,liblapack.so.3 -L.. -lopenblas $(EXTRALIB)
+++ $(CC) $(LDFLAGS) -shared -o $@ $^ `LC_ALL=C ls ../lapack-netlib/*` -Wl,-soname,liblapack.so.3 -L.. -lopenblas $(EXTRALIB)
++
++ clean::
++ rm -f libblas.so.3 liblapack.so.3
--- /dev/null
--- /dev/null
++Description: Remove warning about OpenMP
++ This warning is annoying when the library is built with pthreads.
++ See #684344
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: no
++Last-Update: 2014-02-17
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/driver/others/blas_server.c
+++++ b/driver/others/blas_server.c
++@@ -796,16 +796,6 @@ int exec_blas(BLASLONG num, blas_queue_t
++ fprintf(STDERR, "Exec_blas is called. Number of executing threads : %ld\n", num);
++ #endif
++
++-#ifdef __ELF__
++- if (omp_in_parallel && (num > 1)) {
++- if (omp_in_parallel() > 0) {
++- fprintf(stderr,
++- "OpenBLAS Warning : Detect OpenMP Loop and this application may hang. "
++- "Please rebuild the library with USE_OPENMP=1 option.\n");
++- }
++- }
++-#endif
++-
++ if ((num > 1) && queue -> next) exec_blas_async(1, queue -> next);
++
++ #ifdef TIMING_DEBUG
--- /dev/null
--- /dev/null
++arm-gcc-flags.patch
++kfreebsd.patch
++remove-openmp-warning.patch
++no-embedded-lapack.patch
++shared-blas-lapack.patch
++matgen-symbols-not-included.patch
++order-files.patch
--- /dev/null
--- /dev/null
++Description: Create shared libraries lib{blas,lapack}.so.3
++ It is done so that duplicate code with libopenblas.so.0 is kept as low as
++ possible. Only the symbols from the external BLAS/LAPACK API are incorporated
++ in the shared libraries. The rest is obtained by dynamic linking against
++ libopenblas.so.0.
++Author: Sébastien Villemot <sebastien@debian.org>
++Forwarded: not-needed
++Last-Update: 2014-05-08
++---
++This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
++--- a/interface/Makefile
+++++ b/interface/Makefile
++@@ -2204,3 +2204,18 @@ cblas_xerbla.$(SUFFIX) cblas_xerbla.$(PS
++ # OpenBLAS (unfiltered) tarball
++ delete-duplicate-lapack-objects:
++ cd ../lapack-netlib && rm $(SLAPACKOBJS) $(DLAPACKOBJS) $(CLAPACKOBJS) $(ZLAPACKOBJS) lsame.o xerbla.o
+++
+++shared-blas-lapack: libblas.so.3 liblapack.so.3
+++
+++# The list of prerequisite is created by comparing with NETLIB BLAS public API.
+++# The symbol cblas_xerbla is missing here, but it does not seem to be provided
+++# by libopenblas.so.0 either.
+++libblas.so.3: $(SBLAS1OBJS) $(SBLAS2OBJS) $(SBLAS3OBJS) $(DBLAS1OBJS) $(DBLAS2OBJS) $(DBLAS3OBJS) $(CBLAS1OBJS) $(CBLAS2OBJS) $(CBLAS3OBJS) $(ZBLAS1OBJS) $(ZBLAS2OBJS) $(ZBLAS3OBJS) ../kernel/lsame.o ../kernel/scabs1.o ../kernel/dcabs1.o ../driver/others/xerbla.o
+++ $(CC) $(LDFLAGS) -shared -o $@ $^ -Wl,-soname,libblas.so.3 -L.. -lopenblas $(EXTRALIB)
+++
+++# The prerequisites must match the symbols deleted in target delete-duplicate-lapack-objects
+++liblapack.so.3: $(SLAPACKOBJS) $(DLAPACKOBJS) $(CLAPACKOBJS) $(ZLAPACKOBJS) ../kernel/lsame.o ../driver/others/xerbla.o
+++ $(CC) $(LDFLAGS) -shared -o $@ $^ ../lapack-netlib/* -Wl,-soname,liblapack.so.3 -L.. -lopenblas $(EXTRALIB)
+++
+++clean::
+++ rm -f libblas.so.3 liblapack.so.3
--- /dev/null
--- /dev/null
++#!/usr/bin/make -f
++
++include /usr/share/dpkg/buildflags.mk
++include /usr/share/dpkg/pkg-info.mk
++
++MAKE_OPTIONS := NO_LAPACKE=1 NO_AFFINITY=1 USE_OPENMP=0 NO_WARMUP=1 CFLAGS="$(CPPFLAGS) $(CFLAGS)" FFLAGS="$(FFLAGS)"
++
++# Avoid having -O2 automatically added (especially for DEB_BUILD_OPTIONS=noopt)
++MAKE_OPTIONS += COMMON_OPT= FCOMMON_OPT=-frecursive
++
++# Build generic package with hardcoded max number of threads of 64
++GENERIC_OPTIONS := NUM_THREADS=64
++
++# Architectures with dynamic arch selection
++# TARGET=GENERIC is needed to avoid FTBFS when CPU detection fails (see #923607)
++ENABLE_DYNAMIC_ARCHS := amd64 arm64 i386 kfreebsd-amd64 kfreebsd-i386 ppc64 ppc64el
++ifneq (,$(findstring $(DEB_HOST_ARCH),$(ENABLE_DYNAMIC_ARCHS)))
++ GENERIC_OPTIONS += DYNAMIC_ARCH=1 DYNAMIC_OLDER=1 TARGET=GENERIC
++endif
++
++# For other archs, there is no dynamic arch selection. To avoid selecting a
++# target based on the buildd hardware, we enforce a generic-enough target.
++
++# We cannot use the ARMv7 profile on armhf, because it requires a 32-register FP unit.
++# See kernel/arm/KERNEL.ARMv7: it loads some *_vfpv3.S files, which use 32 registers.
++# Also, it FTBFS if GCC flag -mvfpv3 is removed (see arm-gcc-flags.patch), because GCC
++# refuses asm files with 32 FP registers in that case.
++# Issue discussed in https://github.com/xianyi/OpenBLAS/issues/388
++# See also debian/patches/arm-gcc-flags.patch which is related.
++ifeq ($(DEB_HOST_ARCH),armhf)
++ GENERIC_OPTIONS += TARGET=ARMV6
++endif
++
++# We do not use DYNAMIC_ARCH selection on powerpc because it only works for
++# POWER6 and above
++ifeq ($(DEB_HOST_ARCH),powerpc)
++ GENERIC_OPTIONS += TARGET=PPCG4
++endif
++
++ifeq ($(DEB_HOST_ARCH),mips64el)
++ GENERIC_OPTIONS += TARGET=SICORTEX
++endif
++
++ifeq ($(DEB_HOST_ARCH),sparc64)
++ GENERIC_OPTIONS += TARGET=SPARC
++endif
++
++ifeq ($(DEB_HOST_ARCH),s390x)
++ GENERIC_OPTIONS += TARGET=ZARCH_GENERIC
++endif
++
++
++ifeq (,$(filter custom,$(DEB_BUILD_OPTIONS)))
++ # Generic package
++ MAKE_OPTIONS += $(GENERIC_OPTIONS)
++else
++ # Custom package: leave the arch detection to OpenBLAS, and optimize for the current CPU
++ export DEB_CFLAGS_MAINT_APPEND := -march=native -mtune=native
++ export DEB_FFLAGS_MAINT_APPEND := -march=native -mtune=native
++endif
++
++
++%:
++ dh $@
++
++override_dh_auto_build:
++ $(MAKE) $(MAKE_OPTIONS)
++
++ $(MAKE) -C interface shared-blas-lapack $(MAKE_OPTIONS)
++
++override_dh_auto_install:
++ $(MAKE) install $(MAKE_OPTIONS) DESTDIR=debian/tmp/ PREFIX=/usr OPENBLAS_INCLUDE_DIR=/usr/include/$(DEB_HOST_MULTIARCH) OPENBLAS_LIBRARY_DIR=/usr/lib/$(DEB_HOST_MULTIARCH)
++ mv debian/tmp/usr/include/$(DEB_HOST_MULTIARCH)/cblas.h debian/tmp/usr/include/$(DEB_HOST_MULTIARCH)/cblas-openblas.h
++
++# We want packages linked with -lblas to depend on any BLAS alternative, and we
++# want packages linked with -lopenblas to depend specifically on
++# libopenblas-base.
++#
++# Such a setting is not supported by dh_makeshlibs, so we ship a hand-crafted
++# shlibs file.
++override_dh_makeshlibs:
++ dh_makeshlibs
++ cp debian/libopenblas-base.shlibs debian/libopenblas-base/DEBIAN/shlibs
++
++GENERATED_DEBIAN_FILES := $(patsubst %.in,%,$(wildcard debian/*.pc.in debian/*.postinst.in debian/*.prerm.in))
++
++$(GENERATED_DEBIAN_FILES): %: %.in
++ sed -e "s/@DEB_VERSION_UPSTREAM@/$(DEB_VERSION_UPSTREAM)/g" \
++ -e "s/@DEB_HOST_MULTIARCH@/$(DEB_HOST_MULTIARCH)/g" < $< > $@
++
++override_dh_install: $(GENERATED_DEBIAN_FILES)
++ dh_install
++
++override_dh_clean:
++ dh_clean
++ rm -f $(GENERATED_DEBIAN_FILES)
--- /dev/null
--- /dev/null
++3.0 (quilt)
--- /dev/null
--- /dev/null
++Tests: upstream-testsuite
++Restrictions: allow-stderr
++Depends: @, gfortran
--- /dev/null
--- /dev/null
++#!/bin/sh
++# Execute upstream's testsuite against the installed binaries.
++
++set -e
++
++if [ -z "$AUTOPKGTEST_TMP" ]
++then
++ echo "Temporary directory \$AUTOPKGTEST_TMP is not set. Aborting" >&2
++ exit 1
++fi
++
++# Work from $AUTOPKGTEST_TMP as we need to treat the original source as read-only
++cp -a test Makefile* ?_check cpuid* ctest* getarch* param.h "$AUTOPKGTEST_TMP"/
++cd "$AUTOPKGTEST_TMP"/test
++
++# Make tests use the installed binaries instead of using the build result path
++sed -i -e 's,\.\./\$(LIBNAME),,g' Makefile
++sed -i -e '3i CEXTRALIB += -lopenblas' Makefile
++
++# Execute tests
++make
--- /dev/null
--- /dev/null
++version=4
++opts=dversionmangle=s/\+ds$//,repacksuffix=+ds,filenamemangle=s/.+\/archive\/v(.+)\.tar\.gz$/openblas_$1.orig.tar.gz/ \
++https://github.com/xianyi/OpenBLAS/tags .*/archive/v(\d[\d\.]+)\.tar\.gz
projects / openblas.git / commitdiff