[dgit import tarball libreoffice 1:6.1.5-3+deb10u5 libreoffice_6.1.5-3+deb10u5.debian.tar.xz]
--- /dev/null
+LibreOffice build system
+------------------------
+
+Building the packages from source
+=================================
+Overview:
+ apt-get source libreoffice
+ apt-get build-dep libreoffice (to install build dependencies)
+ cd <source directory>
+ debuild
+
+Changing the build behaviour with DEB_BUILD_OPTIONS
+---------------------------------------------------
+These options are supported:
+
+ debug - build with FULL debug symbols. Default is just to build
+ with SMALL ones since the deb otherwise gets too big
+ ((>400M, ca. 1GB I-S))
+
+ ccache - enable the use of ccache during the build. This is highly
+ recommended if you plan on building the package more than
+ once, or doing any development on the packages. Be aware
+ that you need EXTRAPACKAGES="ccache" in /etc/pbuilderrc
+ when trying to build libreoffice with ccache in
+ $DEB_BUILD_OPTIONS under pbuilder (this has no effect
+ on speed, hough because the cache does not persist in
+ pbuilder)
+
+ parallel=<n>
+ - enable n projects to be built in parallel.
+ The log output can get a little confusing, and some projects
+ may fail still. You need to remove config.status if you
+ change this value after interrupting a build.
+
+ lang=<code>
+ - Build only the specified language
+
+ nocheck
+ - disable run of tests when enabled in rules
+
+
+The targets that are built during the package build
+---------------------------------------------------
+
+- targets run during the package build -
+
+unpack - Does prerequisites for the build: packing, unpacking etc.
+
+build - as the name says
+
+install - Copy files from debian/tmp/pkg into the correct locations
+ for the final package layout in debian/libreoffice*
+ where we need to do that here because it affects arch-dep
+ and arch-indep stuff and therefore cannot be done in
+ install-arch / install-indep.
+
+install-arch - installs arch-dependent stuff into the arch-dep. packages
+install-indep - " "-independent " " " "-indep. packages
+
+langpackgs - Installs the language packgs
+helppkgs - Installs the help packages
+
+maintscripts - Generates the maintainer scripts
+
+get-orig-source - gets original source tarballs and unpacks them
+ GIT_BASEURL can be set to a local mirror
+ GIT_BRANCH is the branch to clone from the repos
+ GIT_TAG is tag that should be packed
+ GIT_BRANCH and GIT_TAG can both be master
+
+Building the package from git master
+====================================
+To do a build from git master, do:
+ mkdir libreoffice-git
+ cd libreoffice-git
+ git clone https://salsa.debian.org/libreoffice-team/libreoffice/libreoffice.git debian
+ ./debian/rules unpack GIT_BRANCH=master GIT_TAG=master SOURCE_TARBALLS=n
+ dpkg-buildpackage
+
+Build system file layout
+========================
+debian/scripts:
+ Directory containing various debian-specific build-related scripts.
--- /dev/null
+ Readme for libreoffice package for Debian
+ --------------------------------------------
+
+Contents
+========
+Introduction
+Quick start
+Printer setup
+ Native CUPS support
+ Non-CUPS systems
+Language support
+ Spellcheck dictionaries, Hyphenation patterns and Thesauri
+ Help packages
+Display and crashing problems
+ X server crashes
+Font problems
+ Why are the menu fonts smaller than in older versions?
+ Changing the default user interface font typeface for non-KDE/Gnome desktops
+Disabling the splash screen
+AppArmor problems
+More information about LibreOffice in Debian
+
+
+Introduction
+============
+Welcome to the LibreOffice packages for the Debian distribution. These
+packages are of the release of LibreOffice with the following
+modifications:
+
+ * Packaged as libreoffice-core (architecture-dependent core files),
+ libreoffice-common (architecture-independent common files),
+ libreoffice-{calc,writer,draw,impress,base} (the LibreOffice modules)
+ libreoffice-l10n-<lang> and libreoffice-help-<lang> and
+ other subpackages (-filters-* for lesser used filters, -gtk/-gnome/-kde,
+ ttf-opensymbol for the OpenSymbol font, ...).
+
+ * Integration with other Debian packages:
+ - Global desktop integration for all users for KDE and Gnome desktops.
+ Menu entries for all window managers that support the Debian 'menu'
+ package.
+
+ * Some extra features not yet present in official releases:
+ - Many of the patches included in the Ximian edition
+
+ * Extra documentation - this README and man pages.
+
+
+Quick start
+===========
+
+To start using LibreOffice, execute the command
+
+ libreoffice
+
+as the user which you wish to start LibreOffice as. This will create the
+necessary user files in ~/.libreoffice/3 for you. Alternatively, you
+can start LibreOffice from the menus, if you have the menu package
+installed/use KDE or GNOME.
+
+Printing
+========
+
+Printing on CUPS systems
+------------------------
+The Debian packages include native CUPS support from version 1.1.1-3. This
+is standard in all OpenOffice.org versions since 2.0.
+When LibreOffice detects a CUPS system, it will download printer settings for
+all CUPS queues, and these can be set from within the printer properties dialog.
+
+If you wish to add additional filters or print commands, you can add them
+using 'spadmin'. Note that the 'Add a printer' option is disabled - you
+should add printers using your favourite CUPS frontend.
+
+When creating a new document, LibreOffice will use the default paper size of
+your default CUPS printer queue. If your new documents have the wrong paper
+size, please check the configuration of your printer.
+
+Non-CUPS systems (lpr, lprng, SAL_DISABLE_CUPS=1)
+---------------------------------
+There is a tool supplied with LibreOffice for setting up printers. You can
+execute this with the command
+
+ /usr/lib/openoffice/program/spadmin
+
+To change the page size and other default settings on non-CUPS systems,
+modify /etc/openoffice/psprint.conf. The settings are documented in there.
+
+Language support
+================
+You can get foreign language support by installing the
+libreoffice-l10n-<lang> package for your language. You will also need the
+'locales' (or belocs-locales-data for some locales, alternatively locales-all
+if you want all locales) package installed.
+The user interface language is selected according to your locale(1) settings.
+
+To change the user interface language for all users, run
+
+ dpkg-reconfigure locales
+
+[ This is not needed when you install locales-all ]
+
+To change the language for just one user, you must arrange for the LC_MESSAGES
+or LANG environment variable to be set. You can list all available locales
+with the command 'locale -a'.
+For example, to run LibreOffice in German from the command line:
+
+ LANG=de_DE libreoffice
+
+Spellcheck dictionaries, Hyphenation patterns and Thesauri
+----------------------------------------------------------
+Currently, there are dictionaries available for Afrikaans, Arabic, Armenian,
+Bulgarian, Catalan, Croatian, Czech, Danish, Dutch, English (AUS/GB/US),
+Esperanto, Estonian, Farsi, Finnish, French, Galician, German (DE/CH/AT),
+Greek, Hebrew, Hungarian, Irish (Gaeilge), Italian, Kurdish, Latvian,
+Lithuanian, Manx Gaelic, Norwegian Bokmal, Norwegian Nynorsk, Polish,
+Portuguese, Portuguese (Brazilian), Russian, Scots Gaelic, Slovak, Slovenian,
+Spanish, Swahili, Swedish, Thai, Ukrainian and Uzbek.
+Dictionaries are packaged as myspell-<lang> (or, for newer ones improved
+for hunspell hunspell-<lang>).
+
+Currently, there are thesauri available for Czech, English (AUS/GB/US),
+German (DE/CH), Italian, Polish and Slovak.
+Thesauri are packaged as mythes-<lang>
+
+Currently, there are hyphenation patterns available for English (USA),
+Croatian, Estonian, German, Hungarian, Italian, Polish, Slovenian and
+Lithuanian.
+Hyphenation patterns are packaged as hyphen-<lang>.
+
+Help packages
+-------------
+Currently, there are localized help packages available for
+Bulgarian, Chinese, Czech, Danish, Dutch, English (GB), English (USA),
+Estonian, French, Galician, German, Hungarian, Italian, Japanese, Khmer,
+Macedonian, Polish, Portuguese (Brazil), Russian, Slovakian, Slovenian and
+Spanish and Swedish.
+They are packaged as libreoffice-help-<lang>.
+
+Problems
+================================
+
+Here are some problems that have been reported with this version. If you do
+not see your problem here, please check for open bug reports:
+
+ http://bugs.debian.org/debian-openoffice@lists.debian.org
+
+1. If you are using NFS mounted file systems, you should make sure that locking
+is functioning:
+
+ 'Make sure NFS lockd/statd is running on the client, or mount the NFS export
+ with the 'nolock' option.
+
+ If /usr gets mounted from an initrd, check 'ps' output once the system is
+ fully booted to ensure that you see a [lockd] kernel process, or an
+ 'rpc.lockd' / 'rpc.statd' userspace process.
+
+ If not, just issue your mount command again (no need to even -o remount it
+ seems!) and run /etc/init.d/nfs-common restart.' (Thanks to Gavin Hamill)
+
+ See this mailing list thread for more information:
+ http://lists.debian.org/debian-openoffice/2004/debian-openoffice-200402/msg00223.html
+
+X server crash with Matrox cards
+--------------------------------
+If your X server is using the mga driver, you may find that your X server
+crashes. You can work around this problem by adding this line to the mga
+Device section:
+
+ Option "XaaNoScreenToScreenColorExpandFill"
+
+There is a bug already open against xserver-xfree86 for this problem. Thanks
+to Philip Armstrong for this information.
+
+LibreOffice crash with nVidia cards
+--------------------------------------
+It seems that LibreOffice can trigger some obscure bugs in the X server
+drivers for Nvidia cards too, especially if you have more than one processor.
+Try updating your drivers to the latest version.
+
+Moreover LibreOffice may hang and takes X with it when RenderAccel
+is enabled when using the proprietary nVidia Drivers. Disabling this option
+helps then.
+
+Font problems
+=============
+
+Why are the menu fonts smaller than in older versions?
+------------------------------------------------------
+This is caused by a change in the way LibreOfffice interprets your X server DPI
+setting.
+This setting, when correctly configured, means that software can display text
+at its true size on the display.
+
+The official OpenOffice.org version assumes that anyone who has their X server
+configured with a DPI of less than 96 has not actually configured it at all,
+and sets it back to 96. Unfortunately, this has the side effect that
+displays with a lower DPI setting, such as some LCD laptop displays, cannot
+display the page at its true size.
+
+So you can fix this by correctly setting the DPI for your X server. Gnome
+users will find that it is set to 96 DPI by default; others may need to edit
+their X server configuration.
+
+The best way to get the correct DPI setting is to add a 'DisplaySize' entry to
+the Monitor section. From the XF86Config-4 man page:
+
+ DisplaySize width height
+ This optional entry gives the width and height, in millimetres, of the
+ picture area of the monitor. If given this is used to calculate the
+ horizontal and vertical pitch (DPI) of the screen.
+
+If you set this value correctly, X will calculate and use the correct DPI
+setting, even if you use several different display resolutions.
+
+From Nikita V. Youshchenko <yoush at cs.msu.su>:
+
+- Many display manager configurations pass the option "-dpi 100" to the X
+ server by default, overriding any autodetected DPI. This has to be removed
+ for DisplaySize to work. The file that you need to edit varies depending on
+ the way your X server is started:
+ xdm: /etc/X11/xdm/Xservers
+ kdm: /etc/kde3/kdm/Xservers
+ gdm: /etc/gdm/gdm.conf
+ startx: /etc/X11/xinit/xserverrc
+
+- Gnome's gconf overrides the autodetected DPI, by setting Xft.dpi to a value
+ entered in configuration dialog, 96 by default. I don't know what is
+ the clean fix for this. Perhaps it should be fixed on the Gnome side.
+
+From Juergen Kreileder <jk at blackdown.de>:>
+
+- Note that with most recent graphics cards and monitors XFree86 is able to
+ get the monitor size (and thus the correct dpi value) through ddc.
+ (**) NVIDIA(0): Validated modes for display device DFP-0:
+ (**) NVIDIA(0): Default mode "1600x1200": 189.0 MHz, 87.5 kHz, 70.0 Hz
+ (II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
+ (--) NVIDIA(0): Display dimensions: (410, 310) mm
+ (--) NVIDIA(0): DPI set to (99, 98)
+ (That's with the proprietary NVIDIA drivers but other XFree86 drivers have
+ that support too.)
+
+If you use KDE or Gnome, LibreOffice will use the same font face and size as
+your desktop environment. If you use another window manager, you can either
+let it pick a default font itself, or change the font to be used (see next
+section), or set the OOO_FORCE_DESKTOP environment variable to
+kde (for kde3)/kde4 or gnome, to use KDE or Gnome settings respectively.
+
+Changing the default user interface font typeface for non-KDE/Gnome desktops
+----------------------------------------------------------------------------
+If you do not want to use KDE or Gnome settings and want to change font sizes
+within LibreOffice, you can configure the user interface font as follows:
+
+- Font size -
+
+You can change the font scaling using the user interface:
+
+ Tools Menu -> Options -> View -> Scale
+
+- Font typeface -
+
+You can change the default font typeface by replacing it with a different font
+installed on your system. This can be done using the font replacement function.
+Choose Tools - Options - LibreOffice - Font Replacement to access this
+function.
+
+To change the font of the LibreOffice user interface, you have to replace
+the default font "Andale Sans UI" with another font and mark the "always"
+setting for this replacement. "Andale Sans UI" is not selectable and has to be
+typed in. The replacement font has to be a font which supports the requested
+locale ( e.g for Korean language the replacement font has to be a font
+including Korean characters).
+
+Refer to the LibreOffice Help for a detailed explanation of the font
+replacement dialog.
+
+Disabling the splash screen
+===========================
+If you don't like the splash screen staying in front of other windows while
+LibreOffice is loading, you can disable it by editing
+/etc/openoffice/sofficerc. Change Logo=1 to Logo=0.
+
+AppArmor problems
+=================
+
+LibreOffice in Debian ships with AppArmor profiles:
+
+ /etc/apparmor.d/usr.lib.libreoffice.*
+
+To debug issues with these AppArmor profiles, see:
+
+ https://wiki.debian.org/AppArmor/Debug
+
+If you are using custom settings such as a custom env:UserInstallation
+directory, you may need to adjust them to match your local setup.
+In this example, you would need to add your custom
+env:UserInstallation to @{libo_user_dirs} in the
+usr.lib.libreoffice.program.soffice.bin profile.
+
+More information about LibreOffice in Debian
+===============================================
+Please read the official README.gz (in the same directory as this file), too.
+
+If you have questions, either post to our the mailing list:
+
+ http://lists.debian.org/debian-openoffice
+
+The Debian LibreOffice team
--- /dev/null
+Package directory modes
+=======================
+The packages can be built directly from a set of git checkouts (vcs mode),
+or from a set of release tarballs (tarball mode).
+
+Vcs mode is useful if you want to work on libreoffice during the development
+cycle. You can check out the latest sources and track them while you make
+changes.
+
+Tarball mode is used to prepare packages of official libreoffice releases
+from the tarballs created by upstream.
+
+Source package creation steps for tarball mode
+==============================================
+The .orig.tar.gz consists of the (separate) source tarballs available
+from The Document Foundation from
+http://download.documentfoundation.org/libreoffice/src/<version/
+
+The libreoffice-x.y.z.a.tar.xz is taken verbatim as original tarball:
+$ ln -s libreoffice-x.y.z.a.tar.xz libreoffice_x.y.z.orig.tar.xz
+$ tar xfvJ libreoffice-x.y.z.a.tar.xz
+
+For a full build you also need helpcontent2 and translations (and the external
+modules' tarballs) which normally are git submodules and/or downloaded during
+the build.
+
+As dpkg-source expects e.g. helpcontent2 as a subdir we can't directly
+symlink (as the tarball contains libreoffice-x.y.z.a/helpcontent2).
+We need to create them manually/repack them:
+
+$ tar xfvJ libreoffice-helpcontent2-x.y.z.a.tar.xz
+$ tar xfvJ libreoffice-translations-x.y.z.a.tar.xz
+$ cd libreoffice-x.y.z.a
+$ for i in helpcontent2 translations tarballs; do \
+ tar cfvJ ../libreoffice_5.2.1.orig-$i.tar.xz $i; \
+ done
+
+The get-orig-source debian/rules target does this with our custom
+mk-origtargz script.
+
+Given those files are not in the tarballs above they need to be removed
+as otherwise dpkg complains
+$ rm ChangeLog-*
+
+We also need the "tarballs".
+A standard upstream build downloads it during the build, but we neither can't nor want it here of course. So:
+
+$ rm -rf tarballs
+$ mkdir -p tarballs
+$ ./autogen.sh $(filter-out --disable-fetch-external,$(CONFIGURE_FLAGS)) --with-all-tarballs
+$ make download gb_LO_VER=<version>
+
+or base on an old version and add/remove the files manually and/or symlink
+to the old version if this didn't change - see git diff of download.lst. This
+is even better given we probably want to add only needed stuff there, and not
+all tarballs (most of those we don't use)
+
+See the "Format: 3.0 (quilt)" section dpkg-source(1) for more details.
+
+Package directory layout - vcs mode
+===================================
+
+In vcs mode we are working directly from checkouts of the libreoffice sources.
+
+We pull in sources to these places:
+
+ "top" directory - checkout of LO's "core" repo
+ debian - git packaging repository from pkg-openoffice project on alioth
+ helpcontent2 - checkout of LO's "help" repo (git submodule)
+ translations - checkout of LO's "translations" repo (git submodule)
+ tarballs - see above in tarball mode
+
+$ git clone git://gerrit.libreoffice.org/core
+$ cd core
+$ git submodule init
+
+(maybe remove dictionaries again, see .git/config, we don't need it here.)
+
+./g pull -r (git pull -r, but also does the necessary steps for the submodules)
+
+For tarballs/, see above
+
--- /dev/null
+LibreOffice QA Tools
+
+smoketest
+=========
+
+smoketest executes a set of macros that create a minimal document in
+each of LibreOffice's applications, tests cut&paste and
+saving/loading in various formats.
+
+Invoke it as oosmoketest.
+
+This program manipulates the LibreOffice user configuration, USE IT
+WITH A DEDICATED USER ACCOUNT if you value your settings.
+
+qadevOOo
+========
+
+qadevOOo is a framework for executing tests for the LibreOffice
+API. It is documented at
+http://qa.openoffice.org/qadevOOo_doc/user-guide.html
+
+Predefined properties files exist in /usr/lib/openoffice/qadevOOo.
+
+Invoke it like e.g:
+
+ ootestapi -ini /usr/lib/openoffice/qadevOOo/java.props -o sd.SdMasterPage
+
+That properties files specify AppExecutionCommand, i.e. an office will
+be started if necessary. Some tests, however seem to work better if
+the office was started manually, as written in the user guide.
+
+ /usr/lib/openoffice/program/soffice "-accept=socket,host=localhost,port=8100;urp;"
+
+Use this invocation and not ooffice to prevent interference with the
+quickstarter code.
+
+testtool
+========
+
+testtool is a framework for executing tests by automating actions in
+LibreOffice's user interface. It is documented at
+http://qa.openoffice.org/qatesttool/index.html
+
+Test scripts for testtool are available in the
+libreoffice-qa-ui-tests package.
+
+Start it as ootesttool.
+
+If you're starting it for the first time, create a profile in
+Extras->Settings where you specify the location of test scripts and
+output path for log files. The default values point to the scripts
+from the libreoffice-qa-ui-tests package, so simply giving a name
+to the profile and pressing the "New" button is enough.
+
+Then open a test script and press F5 to start the test.
+
+Some test scripts may change your LibreOffice user
+configuration. USE IT WITH A DEDICATED USER ACCOUNT if you value your
+settings.
--- /dev/null
+PROGRESSBARCOLOR=215,7,81
--- /dev/null
+Reporting a bug against LibreOffice
+--------------------------------------
+I) Make sure it's a LibreOffice bug after all: #398923 and its friends for
+ example are not.
+ Set the Version: header right. If you found a bug in a specific version,
+ set that as version:, even if you in the meanwhile upgraded. If you are on
+ an up-to-date version and tried old versions and they have the bug, too, set
+ the Version: header to the earliest version you found it in (of course, if
+ versions inbetween don't have the bug use the version in which it reappeared
+ and sustained to the current version)
+
+II) Check on the BTS (http://bugs.debian.org/src:libreoffice) whether the
+ bug already is reported. Do *NOT* report a new one then. For judging whether
+ it's already reported, read *ALL* the bugs, think, try and use common sense.
+
+III) If you have crashes with a document, try another one. If only that or
+ similar docs causes problems please attach THIS (or a similar type one
+ causing it). Otherwise, don't file a bug, we can't look at it anyway.
+
+IV) Please attach more info if possible (see
+ https://wiki.documentfoundation.org/QA/BugReport/Debug_Information#GNU.2FLinux).
+ Install libreoffice-*-dbgsym or libreoffice-dbg before doing this (and maybe
+ the packages it Recommends and/or -dbgsym/-dbg of the libraries LO depends
+ on).
+ Please note that those *-dbgsym packages are not in the main archive; you
+ need to add the debug archive for that.
+ See https://wiki.debian.org/AutomaticDebugPackages
+ Please also read /usr/share/doc/libreoffice-common/README.gz for common
+ problems ("Problems During Program Startup")
+ If you have NFS/Samba/... file locking problems (i.e. files opened
+ read-only when they should be read-write), also see the "File Locking"
+ section in above file.
+
+V) If the bug is also in the version you can get from www.libreoffice.org, file
+ it there (see https://wiki.documentfoundation.org/QA/BugReport) in the first
+ place. If you really think this also should be a bug in the Debian BTS
+ (because it's (release-)critical or otherwise important) please file a bug
+ there too *BUT* note the TDF bug number in the bug or mark it forwarded
+ yourself if you can. Especially this is for feature requests.
+ If you tested other LibreOffice packages and the bug is (not) in version
+ foo from bar, mention that, too.
+
+VI) Only report bugs on completely up-to-date systems. Don't file bugs on a
+ obsolete version and neither on sid/testing systems really old. If bugs
+ got fixed in sid, it doesn't make sense to file them anymore. (Exception
+ is security bugs or really critical bugs which should be get fixed in
+ stable.) When you think a dependency is missing/wrong/too lax please be
+ *sure* that this is the case before reporting it. Most times it isn't.
+ Use common sense and the bug severities for judging here. When you think
+ you have an up-to-date system, check whether you really have one.
+ (And do a dist-upgrade, try to reproduce the bug again).
+ Also don't report bugs on broken mix systems unless you are sure about the
+ dependencies/conflicts (see above).
+
+VII) Please give as much info as possible (installed OOo packages, installed
+ extensions, "special" configs, additions, changes, whatever). Better too
+ much than too less. (See #396225 for example which was caused by an
+ unsupportable, non-free extension)
+
+Thanks.
--- /dev/null
+Source: libreoffice
+Section: editors
+Priority: optional
+Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
+Uploaders: Rene Engelhard <rene@debian.org>, Chris Halls <halls@debian.org>
+Build-Depends: apparmor <!nocheck>,
+ autoconf,
+ automake,
+ bc,
+ binutils (>= 2.23) [mips mipsel],
+ bison,
+ bzip2,
+ coinor-libcoinmp-dev (>= 1.8.3-2),
+ coinor-libcoinutils-dev (>= 2.10.14+repack1-1),
+ debhelper (>= 10),
+ default-jdk (>= 1:1.6) [!hppa !s390 !sparc !hurd-i386 !i386],
+ default-jdk (>= 1:1.7-48) [ia64],
+ default-jdk (>= 2:1.7-52.1) [kfreebsd-any],
+ default-jdk (>= 2:1.8-55) [sparc64],
+ default-jdk (>= 2:1.9) [i386],
+ default-libmysqlclient-dev,
+ dh-apparmor,
+ dh-python,
+ dpkg-dev (>= 1.18.2~),
+ firebird-dev (>= 3.0.0.32483.ds4-4) [!hppa !mips64 !s390 !sparc],
+ firebird3.0-server-core [!hppa !mips64 !s390 !sparc] <!nocheck>,
+ flex (>= 2.3.35),
+ fontconfig [!hppa !kfreebsd-amd64 !kfreebsd-i386 !m68k !mips !mips64 !powerpc !powerpcspe !ppc64 !s390 !s390x !sparc !sparc64] <!nocheck>,
+ fontforge-nox | fontforge,
+ fonts-crosextra-carlito [!hppa !kfreebsd-amd64 !kfreebsd-i386 !m68k !mips !mips64 !powerpc !powerpcspe !ppc64 !s390 !s390x !sparc !sparc64] <!nocheck>,
+ fonts-dejavu [!hppa !kfreebsd-amd64 !kfreebsd-i386 !m68k !mips !mips64 !powerpc !powerpcspe !ppc64 !s390 !s390x !sparc !sparc64] <!nocheck>,
+ fonts-liberation2 [!hppa !kfreebsd-amd64 !kfreebsd-i386 !m68k !mips !mips64 !powerpc !powerpcspe !ppc64 !s390 !s390x !sparc !sparc64] <!nocheck>,
+ g++ (>= 4:7) [m68k],
+ gcc (>= 4:7) [m68k],
+ gdb [!hppa !kfreebsd-amd64 !kfreebsd-i386 !m68k !mips !mips64 !powerpc !powerpcspe !ppc64 !s390 !s390x !sparc !sparc64] <!nocheck>,
+ ghostscript [!hppa !kfreebsd-amd64 !kfreebsd-i386 !m68k !mips !mips64 !powerpc !powerpcspe !ppc64 !s390 !s390x !sparc !sparc64] <!nocheck>,
+ gobject-introspection (>= 1.32.0),
+ gperf,
+ gpg <!nocheck>,
+ gpg-agent <!nocheck>,
+ gpgconf <!nocheck>,
+ hunspell-en-us [!hppa !kfreebsd-amd64 !kfreebsd-i386 !m68k !mips !mips64 !powerpc !powerpcspe !ppc64 !s390 !s390x !sparc !sparc64] <!nocheck>,
+ imagemagick [!hppa !kfreebsd-amd64 !kfreebsd-i386 !m68k !mips !mips64 !powerpc !powerpcspe !ppc64 !s390 !s390x !sparc !sparc64] <!nocheck>,
+ java-common (>= 0.61),
+ javahelper (>= 0.37~),
+ junit4 (>= 4.8.2-2) [amd64 arm64] <!nocheck>,
+ libabw-dev (>= 0.1),
+ libarchive-zip-perl [!hppa !mips64 !s390 !sparc],
+ libavahi-client-dev,
+ libbase-java [!hppa !mips64 !s390 !sparc],
+ libbluetooth-dev [linux-any],
+ libboost-date-time-dev (>= 1.58),
+ libboost-dev (>= 1.58),
+ libboost-filesystem-dev (>= 1.58),
+ libboost-iostreams-dev (>= 1.58),
+ libboost-locale-dev (>= 1.58),
+ libboost-system-dev (>= 1.58),
+ libc0.1 (>= 2.10.2-7) [kfreebsd-any],
+ libc6 (>= 2.17-6) [mips mipsel],
+ libcairo2-dev,
+ libcdr-dev (>= 0.1),
+ libclucene-dev (>= 2.3.3.4-4.1),
+ libcmis-dev (>= 0.5.0-3),
+ libcommons-logging-java [!hppa !mips64 !s390 !sparc],
+ libcppunit-dev (>= 1.14) [!hppa !kfreebsd-amd64 !kfreebsd-i386 !m68k !mips !mips64 !powerpc !powerpcspe !ppc64 !s390 !s390x !sparc !sparc64] <!nocheck>,
+ libcups2-dev,
+ libcurl4-gnutls-dev,
+ libdbus-glib-1-dev (>= 0.70),
+ libdconf-dev (>= 0.15.2),
+ libe-book-dev,
+ libe-book-dev (>= 0.1.2) <!nocheck>,
+ libebook1.2-dev,
+ libeot-dev,
+ libepoxy-dev (>= 1.2),
+ libepubgen-dev (>= 0.1.0),
+ libetonyek-dev,
+ libetonyek-dev (>= 0.1.8) <!nocheck>,
+ libexpat1-dev,
+ libexttextcat-dev (>= 3.4.1),
+ libflute-java (>= 1.1.6) [!hppa !mips64 !s390 !sparc],
+ libfontconfig1-dev,
+ libfonts-java (>= 1.1.6) [!hppa !mips64 !s390 !sparc],
+ libformula-java (>= 1.1.7) [!hppa !mips64 !s390 !sparc],
+ libfreehand-dev (>= 0.1),
+ libfreetype6-dev (>= 2.2.0),
+ libgirepository1.0-dev (>= 1.32),
+ libgl1-mesa-dev,
+ libglib2.0-dev (>= 2.38.0),
+ libglib2.0-dev (>= 2.4),
+ libglm-dev (>= 0.9.9~a2),
+ libgpg-error-dev,
+ libgpgme-dev,
+ libgpgmepp-dev,
+ libgraphite2-dev (>= 0.9.3),
+ libgstreamer-plugins-base1.0-dev,
+ libgstreamer1.0-dev,
+ libgtk-3-dev (>= 3.18.0),
+ libgtk2.0-dev (>= 2.18.0),
+ libharfbuzz-dev (>= 0.9.42),
+ libhsqldb1.8.0-java (>> 1.8.0.10) [!hppa !mips64 !s390 !sparc],
+ libhunspell-dev (>= 1.1.5-2),
+ libhyphen-dev (>= 2.4),
+ libice-dev,
+ libicu-dev (>= 52),
+ libjpeg-dev,
+ libkf5config-dev,
+ libkf5coreaddons-dev,
+ libkf5i18n-dev,
+ libkf5kio-dev,
+ libkf5windowsystem-dev,
+ liblangtag-dev (>= 0.4),
+ liblayout-java (>= 0.2.10) [!hppa !mips64 !s390 !sparc],
+ liblcms2-dev,
+ libldap2-dev,
+ libloader-java (>= 1.1.6) [!hppa !mips64 !s390 !sparc],
+ liblpsolve55-dev (>= 5.5.0.13-5+b1),
+ libmdds-dev (>= 1.4.1),
+ libmspub-dev (>= 0.1),
+ libmwaw-dev (>= 0.3.1),
+ libmwaw-dev (>= 0.3.13) <!nocheck>,
+ libmysqlcppconn-dev (>= 1.1.9-4),
+ libmythes-dev (>= 2:1.2),
+ libneon27-gnutls-dev,
+ libnspr4-dev,
+ libnss3-dev (>= 3.12.3),
+ libnumbertext-dev,
+ libodfgen-dev (>= 0.1),
+ liborcus-dev (>= 0.14.0+really0.14.0),
+ libpagemaker-dev,
+ libpentaho-reporting-flow-engine-java (>= 0.9.4) [!hppa !mips64 !s390 !sparc],
+ libpng-dev,
+ libpoppler-cpp-dev,
+ libpoppler-dev (>= 0.12.0),
+ libpoppler-private-dev,
+ libpq-dev (>= 9.0~),
+ libqt5x11extras5-dev (>= 5.6),
+ libqxp-dev,
+ librdf0-dev (>= 1.0.16-2),
+ librepository-java (>= 1.1.6) [!hppa !mips64 !s390 !sparc],
+ librevenge-dev,
+ libsac-java [!hppa !mips64 !s390 !sparc],
+ libsane-dev,
+ libserializer-java (>= 1.1.6) [!hppa !mips64 !s390 !sparc],
+ libsm-dev,
+ libstaroffice-dev,
+ libstaroffice-dev (>= 0.0.3) <!nocheck>,
+ libsuitesparse-dev (>= 1:3.4.0),
+ libvisio-dev (>= 0.1),
+ libvlc5 (>= 2.0.8),
+ libwpd-dev (>= 0.10),
+ libwpg-dev (>= 0.3),
+ libwps-dev (>= 0.4),
+ libwps-dev (>= 0.4.9) <!nocheck>,
+ libx11-dev,
+ libxaw7-dev,
+ libxcb1-dev,
+ libxext-dev,
+ libxinerama-dev,
+ libxkbfile-dev,
+ libxml-java (>= 1.1.6) [!hppa !mips64 !s390 !sparc],
+ libxml2-dev (>= 2.8),
+ libxml2-utils,
+ libxmlsec1-dev (>= 1.2.24),
+ libxrandr-dev,
+ libxrender-dev,
+ libxslt1-dev,
+ libxt-dev,
+ libxtst-dev,
+ libzmf-dev,
+ locales [!hppa !kfreebsd-amd64 !kfreebsd-i386 !m68k !mips !mips64 !powerpc !powerpcspe !ppc64 !s390 !s390x !sparc !sparc64] <!nocheck>,
+ lp-solve (>= 5.5.0.13-5+b1),
+ maven-repo-helper,
+ pkg-config,
+ pstoedit [!hppa !kfreebsd-amd64 !kfreebsd-i386 !m68k !mips !mips64 !powerpc !powerpcspe !ppc64 !s390 !s390x !sparc !sparc64] <!nocheck>,
+ python3,
+ python3-dev (>= 3.3),
+ python3-distutils,
+ python3-lxml <!nocheck>,
+ qt5-qmake (>= 5.6),
+ qtbase5-dev (>= 5.6),
+ qtbase5-dev-tools (>= 5.6),
+ qtchooser,
+ ucpp,
+ unixodbc-dev (>= 2.2.11),
+ unzip,
+ x11proto-render-dev,
+ xsltproc,
+ zip,
+ zlib1g-dev
+Build-Depends-Indep: ant (>= 1.7.0) [!hppa !mips64 !s390 !sparc],
+ ant-optional (>= 1.7.0) [!hppa !mips64 !s390 !sparc],
+ doxygen (>= 1.8.4) <!nodoc>,
+ g++-mingw-w64-i686,
+ gettext,
+ graphviz <!nodoc>,
+ libbsh-java,
+ rdfind,
+ symlinks
+Build-Conflicts: amd-libopencl1,
+ fonts-liberation (= 1:1.07.4-3) <!nocheck>,
+ fonts-liberation (= 1:1.07.4-4) <!nocheck>,
+ fonts-liberation (= 1:1.07.4-5) <!nocheck>,
+ fonts-liberation2 (= 2.00.1-4) <!nocheck>,
+ fonts-liberation2 (= 2.00.1-5) <!nocheck>,
+ fonts-opensymbol <!nocheck>,
+ nvidia-glx-dev,
+ nvidia-glx-legacy-dev,
+ nvidia-libopencl1
+Standards-Version: 4.0.1
+Vcs-Git: https://salsa.debian.org/libreoffice-team/libreoffice/libreoffice.git
+Vcs-Browser: https://salsa.debian.org/libreoffice-team/libreoffice/libreoffice
+Bugs:
+Homepage: http://www.libreoffice.org
+
+Package: libreoffice
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Section: metapackages
+Depends: libreoffice-base [!hppa !mips64 !s390 !sparc],
+ libreoffice-calc,
+ libreoffice-core (= ${binary:Version}),
+ libreoffice-draw,
+ libreoffice-impress,
+ libreoffice-math,
+ libreoffice-report-builder-bin [!hppa !mips64 !s390 !sparc],
+ libreoffice-writer,
+ ${avmedia-be-depends},
+ ${misc:Depends},
+ ${pyuno-depends}
+Recommends: fonts-crosextra-caladea,
+ fonts-crosextra-carlito,
+ fonts-dejavu,
+ fonts-liberation,
+ fonts-liberation2,
+ fonts-linuxlibertine,
+ fonts-noto-core,
+ fonts-noto-mono,
+ fonts-noto-ui-core,
+ fonts-sil-gentium-basic,
+ libreoffice-librelogo,
+ libreoffice-nlpsolver,
+ libreoffice-report-builder [!hppa !mips64 !s390 !sparc],
+ libreoffice-script-provider-bsh,
+ libreoffice-script-provider-js,
+ libreoffice-script-provider-python,
+ libreoffice-sdbc-postgresql,
+ libreoffice-wiki-publisher,
+ ${java-common-depends}
+Suggests: cups-bsd,
+ firefox-esr | thunderbird | firefox,
+ ghostscript,
+ gnupg,
+ gpa,
+ hunspell-dictionary,
+ hyphen-hyphenation-patterns,
+ imagemagick | graphicsmagick-imagemagick-compat,
+ libgl1,
+ libreoffice-gnome | libreoffice-kde5,
+ libreoffice-grammarcheck,
+ libreoffice-help (= ${help-l10n-virtual-version}),
+ libreoffice-l10n (= ${help-l10n-virtual-version}),
+ libxrender1,
+ myspell-dictionary,
+ mythes-thesaurus,
+ openclipart2-libreoffice | openclipart-libreoffice,
+ pstoedit,
+ unixodbc,
+ ${gstreamer-plugins-suggests},
+ ${java-runtime-depends},
+ ${libsane-suggests},
+ ${ooo-officebean-dep}
+Conflicts: libreoffice-dev (<= 1:5.0.3~rc1-2),
+ libreoffice-dev-doc (<= 1:5.0.3~rc1-2)
+Description: office productivity suite (metapackage)
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This metapackage installs all components of libreoffice:
+ * libreoffice-writer: Word processor
+ * libreoffice-calc: Spreadsheet
+ * libreoffice-impress: Presentation
+ * libreoffice-draw: Drawing
+ * libreoffice-base: Database
+ * libreoffice-math: Equation editor
+ It also recommends additional packages (e.g. fonts) in order to match an
+ upstream LibreOffice install as closely as possible.
+ .
+ You can extend the functionality of LibreOffice by installing these
+ packages:
+ * hunspell-*/myspell-*: Hunspell/Myspell dictionaries
+ for use with LibreOffice
+ * libreoffice-l10n-*: UI interface translation
+ * libreoffice-help-*: User help
+ * mythes-*: Thesauri for the use with LibreOffice
+ * hyphen-*: Hyphenation patterns for LibreOffice
+ * libreoffice-gtk(2|3): Gtk UI Plugin, GNOME File Picker support
+ * libreoffice-gnome: GIO backend
+ * unixodbc: ODBC database support
+ * cups-bsd: Allows LibreOffice to detect your CUPS printer queues
+ automatically
+ * libsane: Use your sane-supported scanner with LibreOffice
+ * libxrender1: Speed up display by using Xrender library
+ * libgl1: OpenGL support
+ * openclipart-libreoffice: Open Clip Art Gallery with LibreOffice index
+ files
+ * firefox-esr | thunderbird | firefox:
+ Mozilla profile with Certificates needed for XML Security...
+ * openjdk-9-jre | openjdk-8-jre | openjdk-7-jre | java6-runtime:
+ Java Runtime Environment for use with LibreOffice
+ * pstoedit / imagemagick / ghostscript: helper tools for EPS
+ * gstreamer0.10-plugins-*: GStreamer plugins for use with LibreOffices
+ media backend
+ * libpaper-utils: papersize detection support via paperconf
+ * bluez: Bluetooth support for Impress (slideshow remote control)
+
+Package: libreoffice-l10n-za
+Section: metapackages
+Architecture: all
+Depends: libreoffice-l10n-af,
+ libreoffice-l10n-en-za,
+ libreoffice-l10n-nr,
+ libreoffice-l10n-nso,
+ libreoffice-l10n-ss,
+ libreoffice-l10n-st,
+ libreoffice-l10n-tn,
+ libreoffice-l10n-ts,
+ libreoffice-l10n-ve,
+ libreoffice-l10n-xh,
+ libreoffice-l10n-zu,
+ ${misc:Depends}
+Description: office productivity suite -- South African language packages
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package is a metapackage installing l10n packages for all 11 South
+ African languages.
+
+Package: libreoffice-l10n-in
+Section: metapackages
+Architecture: all
+Depends: libreoffice-l10n-as,
+ libreoffice-l10n-bn,
+ libreoffice-l10n-gu,
+ libreoffice-l10n-hi,
+ libreoffice-l10n-ml,
+ libreoffice-l10n-mr,
+ libreoffice-l10n-or,
+ libreoffice-l10n-pa-in,
+ libreoffice-l10n-ta,
+ libreoffice-l10n-te,
+ ${misc:Depends}
+Recommends: fonts-indic
+Description: office productivity suite -- Indic language packages
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package is a metapackage installing l10n packages for all available
+ indic languages.
+
+Package: libreoffice-core
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: fontconfig,
+ fonts-opensymbol,
+ libreoffice-common (>> ${base-version}),
+ ure (>= 6.1.1~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: libpaper-utils
+Breaks: browser-plugin-libreoffice,
+ libreoffice-base (<< ${binary:Version}),
+ libreoffice-calc (<< ${binary:Version}),
+ libreoffice-common (<< 1:5.4.1),
+ libreoffice-dev (<< ${binary:Version}),
+ libreoffice-draw (<< ${binary:Version}),
+ libreoffice-evolution (<< ${binary:Version}),
+ libreoffice-gnome (<< ${binary:Version}),
+ libreoffice-gtk2 (<< ${binary:Version}),
+ libreoffice-gtk3 (<< ${binary:Version}),
+ libreoffice-impress (<< ${binary:Version}),
+ libreoffice-kde4 (<< ${binary:Version}),
+ libreoffice-kde5 (<< ${binary:Version}),
+ libreoffice-officebean (<< ${binary:Version}),
+ libreoffice-pdfimport (<< 1:5.4~),
+ libreoffice-writer (<< ${binary:Version})
+Conflicts: libreoffice-filter-binfilter, libreoffice-unbundled
+Provides: libreoffice-bundled
+Replaces: libreoffice-common (<< 1:5.4.1), libreoffice-pdfimport (<< 1:5.4~)
+Description: office productivity suite -- arch-dependent files
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the architecture-dependent core files of
+ LibreOffice. See the libreoffice package for more information.
+
+Package: libreoffice-common
+Architecture: all
+Depends: libreoffice-style-colibre,
+ libreoffice-style-tango,
+ ure,
+ ${misc:Depends},
+ ${numbertext-data-recommends}
+Suggests: libreoffice-style
+Recommends: fonts-liberation2 | ttf-mscorefonts-installer, apparmor (>= 2.13.1~),
+ xdg-utils,
+ ${pyuno-depends},
+ ${textcat-data-recommends}
+Conflicts: broffice,
+ libreoffice-filter-mobiledev,
+ libreoffice-l10n-4.3,
+ libreoffice-l10n-4.4,
+ libreoffice-wiki-publisher (<< 1.2.0+LibO5.4.0~rc2),
+ openoffice-unbundled, apparmor (<< 2.13.1~)
+Provides: libreoffice-l10n-en-us
+Breaks: libreoffice-core (<< 1:${oover}~),
+ libreoffice-core (>= 1:${next-oover}~),
+ libreoffice-help (<< 5.4),
+ libreoffice-help-5.2,
+ libreoffice-style-andromeda (<< 1:${oover}~),
+ libreoffice-style-crystal (<< 1:${oover}~),
+ libreoffice-style-crystal (>= 1:${next-oover}~),
+ libreoffice-style-galaxy (<< 1:${oover}~),
+ libreoffice-style-galaxy (>= 1:${next-oover}~),
+ libreoffice-style-hicontrast (<< 1:${oover}~),
+ libreoffice-style-hicontrast (>= 1:${next-oover}~),
+ libreoffice-style-tango (<< 1:${oover}~),
+ libreoffice-style-tango (>= 1:${next-oover}~),
+ libreoffice-writer2latex (<< 1.0.2-9),
+ libreoffice-writer2xhtml (<< 1.0.2-9)
+Replaces: libreoffice-pdfimport (<< 1:5.4~)
+Description: office productivity suite -- arch-independent files
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the architecture-independent files of
+ LibreOffice.
+
+Package: libreoffice-java-common
+Architecture: all
+Depends: libreoffice-common, ${java:Depends}, ${misc:Depends}
+Description: office productivity suite -- arch-independent Java support files
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the architecture-independent files of
+ the Java support for LibreOffice (Java classes, scripts, config snippets).
+
+Package: libreoffice-help-common
+Architecture: all
+Depends: libreoffice-common, ${help-common-depends}, ${misc:Depends}
+Breaks: libreoffice-common (<< 1:6.1.0~alpha1-1)
+Replaces: libreoffice-common (<< 1:6.1.0~alpha1-1)
+Description: office productivity suite -- common files for LibreOffice help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the common files (e.g. language-independent, media) files
+ for the LibreOffice Help.
+
+Package: libreoffice-writer
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: libreoffice-base-core (= ${binary:Version}) [!hppa !mips64 !s390 !sparc],
+ libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: libreoffice-math
+Suggests: fonts-crosextra-caladea,
+ fonts-crosextra-carlito,
+ libreoffice-base,
+ ${java-common-depends},
+ ${java-runtime-depends}
+Replaces: libreoffice-common (<< 1:5.4.1)
+Breaks: libreoffice-common (<< 1:5.4.1)
+Description: office productivity suite -- word processor
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the wordprocessor component for LibreOffice.
+
+Package: libreoffice-calc
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: libreoffice-base-core (= ${binary:Version}) [!hppa !mips64 !s390 !sparc],
+ libreoffice-core (= ${binary:Version}),
+ ${lpsolve-dep},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: ocl-icd-libopencl1 | mesa-opencl-icd | beignet-opencl-icd
+Replaces: libreoffice-common (<< 1:5.4.1)
+Breaks: libreoffice-common (<< 1:5.4.1)
+Description: office productivity suite -- spreadsheet
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the spreadsheet component for LibreOffice.
+
+Package: libreoffice-impress
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: libreoffice-core (= ${binary:Version}),
+ libreoffice-draw (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Replaces: libreoffice-common (<< 1:5.4.1), libreoffice-ogltrans (<< 1:6.1.4-2~)
+Conflicts: libreoffice-ogltrans (<< 1:6.1.4-2~)
+Provides: libreoffice-ogltrans
+Breaks: libreoffice-common (<< 1:5.4.1)
+Recommends: ${avmedia-be-depends}
+Suggests: bluez
+Description: office productivity suite -- presentation
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the presentation component for LibreOffice.
+
+Package: libreoffice-draw
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Replaces: libreoffice-common (<< 1:5.4.1), libreoffice-impress (<< 1:5.2.0-2)
+Breaks: libreoffice-common (<< 1:5.4.1), libreoffice-impress (<< 1:5.2.0-2)
+Description: office productivity suite -- drawing
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the drawing component for LibreOffice.
+
+Package: libreoffice-math
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: fonts-opensymbol,
+ libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Description: office productivity suite -- equation editor
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the equation editor component for LibreOffice.
+
+Package: libreoffice-base-core
+Architecture: alpha amd64 arm64 armel armhf i386 ia64 m68k mips mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 powerpcspe kfreebsd-amd64 kfreebsd-i386
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: libreoffice-base
+Replaces: libreoffice-base-drivers (<< 1:6.1.1~rc1-2)
+Description: office productivity suite -- shared library
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains common libraries of LibreOffice Base used by
+ Base, Writer and Calc.
+ .
+ If you need full Base functionality (or actual database drivers), please
+ install libreoffice-base (and/or libreoffice-base-drivers and/o
+ libreoffice-sdbc-*).
+
+Package: libreoffice-base
+Architecture: alpha amd64 arm64 armel armhf i386 ia64 m68k mips mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 powerpcspe kfreebsd-amd64 kfreebsd-i386
+Section: database
+Depends: libreoffice-base-core (= ${binary:Version}),
+ libreoffice-base-drivers (= ${binary:Version}),
+ libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: libreoffice-report-builder, unixodbc
+Recommends: libreoffice-writer, ${java-common-depends}, ${java-runtime-depends}
+Replaces: libreoffice-common (<< 1:4.3.0~beta1)
+Description: office productivity suite -- database
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the database component for LibreOffice.
+
+Package: libreoffice-style-breeze
+Architecture: all
+Enhances: libreoffice-core
+Depends: libreoffice-style-tango, ${misc:Depends}
+Suggests: breeze-icon-theme
+Provides: libreoffice-style
+Description: office productivity suite -- Breeze symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "breeze" symbol style, default style for KDE 5.
+
+Package: libreoffice-style-colibre
+Architecture: all
+Enhances: libreoffice-core
+Depends: ${misc:Depends}
+Provides: libreoffice-style
+Description: office productivity suite -- colibre symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "colibre" symbol style - a icon theme
+ which follow Microsoft(R) Offices color scheme.
+
+Package: libreoffice-style-tango
+Architecture: all
+Enhances: libreoffice-core
+Depends: ${misc:Depends}
+Suggests: tango-icon-theme
+Provides: libreoffice-style
+Replaces: libreoffice-common (<= 1:4.3.0~beta2-2)
+Description: office productivity suite -- Tango symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "tango" symbol style.
+
+Package: libreoffice-style-sifr
+Architecture: all
+Enhances: libreoffice-core
+Depends: libreoffice-style-breeze, ${misc:Depends}
+Provides: libreoffice-style, libreoffice-style-hicontrast
+Replaces: libreoffice-style-hicontrast
+Conflicts: libreoffice-style-hicontrast
+Description: office productivity suite -- Sifr symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "sifr" symbol style (an adaption of the Gnome
+ symbolic theme), needs to be manually enabled in the LibreOffice option
+ menu.
+
+Package: libreoffice-style-elementary
+Architecture: all
+Depends: libreoffice-style-tango, ${misc:Depends}
+Enhances: libreoffice-core
+Provides: libreoffice-style
+Description: office productivity suite -- Elementary symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "elementary" symbol style, default style
+ for GTK+/Gnome.
+
+Package: libreoffice-gnome
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: libreoffice-style-elementary, ${gnome-gtk-recommends}
+Suggests: libreoffice-evolution, seahorse
+Section: gnome
+Enhances: libreoffice
+Provides: libreoffice-gtk-gnome
+Replaces: libreoffice-gtk (<< 1:5.0.0~rc2-1)
+Description: office productivity suite -- GNOME integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the GIO support.
+ .
+ You can extend the functionality of this by installing these packages:
+ .
+ * libreoffice-evolution: Evolution addressbook support
+ * evolution
+
+Package: python3-uno
+Section: python
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Enhances: libreoffice
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${python3:Depends},
+ ${shlibs:Depends}
+Conflicts: python-uno
+Replaces: libreoffice-common (<< 1:4.4.0~beta2),
+ libreoffice-core (= 1:4.3.0~beta1-1)
+Description: Python-UNO bridge
+ The Python-UNO bridge allows use of the standard LibreOffice API
+ with the Python scripting language. It additionally allows
+ others to develop UNO components in Python, thus Python UNO components
+ may be run within the LibreOffice process and can be called from C++
+ or the built in StarBasic scripting language.
+Homepage: http://udk.openoffice.org/python/python-bridge.html
+
+Package: libreoffice-officebean
+Architecture: alpha amd64 arm64 armel armhf i386 ia64 m68k mips mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 powerpcspe kfreebsd-amd64 kfreebsd-i386
+Section: java
+Depends: libreoffice-core (= ${binary:Version}),
+ ${java-common-depends},
+ ${java-runtime-depends},
+ ${java:Depends},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Description: office productivity suite -- Java bean
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the LibreOffice Office Bean for embedding
+ LibreOffice in custom Java applications.
+
+Package: libreoffice-script-provider-python
+Architecture: all
+Section: python
+Depends: libreoffice-common,
+ libreoffice-core,
+ ${misc:Depends},
+ ${python:Depends},
+ ${pyuno-depends}
+Description: Python script support provider for LibreOffice scripting framework
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The Scripting Framework allows LibreOffice users to write and run macros
+ in multiple languages including LibreOffice Basic, Python, Java, BeanShell
+ and JavaScript. These macros can then be assigned to menus, toolbars,
+ keyboard shortcuts, events and embedded objects.
+ .
+ This package contains the script provider to support Python.
+
+Package: libreoffice-script-provider-bsh
+Architecture: all
+Section: java
+Depends: libreoffice-common,
+ libreoffice-core,
+ ${java-common-depends},
+ ${java-runtime-depends},
+ ${java:Depends},
+ ${misc:Depends}
+Description: BeanShell script support provider for LibreOffice scripting framework
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The Scripting Framework allows LibreOffice users to write and run macros
+ in multiple languages including LibreOffice Basic, Python, Java, BeanShell
+ and JavaScript. These macros can then be assigned to menus, toolbars,
+ keyboard shortcuts, events and embedded objects.
+ .
+ This package contains the script provider to support BeanShell.
+
+Package: libreoffice-script-provider-js
+Architecture: all
+Section: web
+Depends: libreoffice-common,
+ libreoffice-core,
+ ${java-common-depends},
+ ${java-runtime-depends},
+ ${java:Depends},
+ ${misc:Depends}
+Description: JavaScript script support provider for LibreOffice scripting framework
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The Scripting Framework allows LibreOffice users to write and run macros
+ in multiple languages including LibreOffice Basic, Python, Java, BeanShell
+ and JavaScript. These macros can then be assigned to menus, toolbars,
+ keyboard shortcuts, events and embedded objects.
+ .
+ This package contains the script provider to support JavaScript.
+
+Package: libreoffice-avmedia-backend-gstreamer
+Section: misc
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: libreoffice-core, ${misc:Depends}, ${shlibs:Depends}
+Recommends: gstreamer1.0-plugins-bad
+Provides: libreoffice-avmedia-backend
+Description: GStreamer backend for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains a GStreamer backend for LibreOffices avmedia component
+ to play audio/video.
+
+Package: libreoffice-avmedia-backend-vlc
+Section: misc
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: libreoffice-core, ${libvlc-dep}, ${misc:Depends}, ${shlibs:Depends}
+Provides: libreoffice-avmedia-backend
+Description: VLC backend for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains a VLC backend for LibreOffices avmedia component
+ to play audio/video.
+
+Package: libreoffice-sdbc-hsqldb
+Depends: libreoffice-core,
+ ${java-common-depends},
+ ${java-runtime-depends},
+ ${java:Depends},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Architecture: alpha amd64 arm64 armel armhf i386 ia64 m68k mips mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 powerpcspe kfreebsd-amd64 kfreebsd-i386
+Section: database
+Enhances: libreoffice-base-drivers
+Description: HSQLDB SDBC driver for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The HSQLDB SDBC Driver allows one to use the HSQLDB embedded database from
+ LibreOffice without any wrapper layer such as ODBC or JDBC.
+
+Package: libreoffice-base-drivers
+Depends: libreoffice-core, ${misc:Depends}, ${shlibs:Depends}
+Architecture: alpha amd64 arm64 armel armhf i386 ia64 m68k mips mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 powerpcspe kfreebsd-amd64 kfreebsd-i386
+Section: database
+Suggests: libjtds-java,
+ libreoffice-mysql-connector | libmyodbc | libmariadb-java,
+ libreoffice-sdbc-postgresql | odbc-postgresql | libpg-java,
+ libsqliteodbc | tdsodbc | mdbtools
+Recommends: libreoffice-sdbc-hsqldb [alpha amd64 arm64 armel armhf i386 ia64 m68k mips mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 powerpcspe kfreebsd-amd64 kfreebsd-i386],
+ ${base-firebird-recommends}
+Replaces: libreoffice-base (<< 1:4.3.0-3)
+Breaks: libreoffice-base (<< 1:4.3.0-3)
+Description: Database connectivity drivers for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the database connectivity drivers used by LibreOffices
+ database functionality:
+ - ODBC
+ - JDBC
+ - dBase
+ - Calc
+ - Flat files
+ - MySQL
+ .
+ You can extend this by installing:
+ .
+ * unixodbc: ODBC database support
+ * libmyodbc | odbc-postgresql | libsqliteodbc | tdsodbc | mdbtools: ODBC
+ drivers for:
+ - MySQL
+ - PostgreSQL
+ - SQLite
+ - MS SQL / Sybase SQL
+ - *.mdb (JET / MS Access)
+ * libmariadb-java | libpg-java | libjtds-java: JDBC Drivers
+ for:
+ - MySQL/MariaDB
+ - PostgreSQL
+ - MS SQL Server and Sybase
+ * libreoffice-sdbc-hsqldb: embedded HSQLDB SDBC Driver
+ * libreoffice-sdbc-firebird: Firebird SDBC Driver
+ * libreoffice-sdbc-postgresql: PostgreSQL SDBC Driver
+ * libreoffice-mysql-connector: "native" MySQL Connector
+
+Package: libreoffice-l10n-af
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-af | myspell-dictionary-af,
+ hyphen-af,
+ libreoffice-grammarcheck-af,
+ libreoffice-help-af,
+ mythes-af
+Description: office productivity suite -- Afrikaans language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Afrikaans.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-am
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-am | myspell-dictionary-am,
+ hyphen-am,
+ libreoffice-grammarcheck-am,
+ libreoffice-help-am,
+ mythes-am
+Description: office productivity suite -- Amharic language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Amharic.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ar
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: fonts-hosny-amiri,
+ fonts-hosny-thabit,
+ fonts-kacst,
+ fonts-sil-scheherazade,
+ libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ar | myspell-dictionary-ar,
+ hyphen-ar,
+ libreoffice-grammarcheck-ar,
+ libreoffice-help-ar,
+ mythes-ar
+Description: office productivity suite -- Arabic language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Arabic.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-as
+Section: localization
+Architecture: all
+Depends: libreoffice-common,
+ locales (>= 2.3.6.ds1-1) | locales-all (>= 2.3.6.ds1-1),
+ ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-as | myspell-dictionary-as,
+ hyphen-as,
+ libreoffice-grammarcheck-as,
+ libreoffice-help-as,
+ mythes-as
+Description: office productivity suite -- Assamese language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Assamese.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ast
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ast | myspell-dictionary-ast,
+ hyphen-ast,
+ libreoffice-grammarcheck-ast,
+ libreoffice-help-ast,
+ mythes-ast
+Description: office productivity suite -- Asturian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Asturian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-be
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-be | myspell-dictionary-be,
+ hyphen-be,
+ libreoffice-grammarcheck-be,
+ libreoffice-help-be,
+ mythes-be
+Description: office productivity suite -- Belarusian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Belarusian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-bg
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-bg | myspell-dictionary-bg,
+ hyphen-bg,
+ libreoffice-grammarcheck-bg,
+ libreoffice-help-bg,
+ mythes-bg
+Description: office productivity suite -- Bulgarian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Bulgarian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-bn
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: fonts-beng, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-bn | myspell-dictionary-bn,
+ hyphen-bn,
+ libreoffice-grammarcheck-bn,
+ libreoffice-help-bn,
+ mythes-bn
+Description: office productivity suite -- Bengali language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Bengali.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-br
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-br | myspell-dictionary-br,
+ hyphen-br,
+ libreoffice-grammarcheck-br,
+ libreoffice-help-br,
+ mythes-br
+Description: office productivity suite -- Breton language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Breton.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-bs
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-bs | myspell-dictionary-bs,
+ hyphen-bs,
+ libreoffice-grammarcheck-bs,
+ libreoffice-help-bs,
+ mythes-bs
+Description: office productivity suite -- Bosnian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Bosnian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ca
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ca | myspell-dictionary-ca,
+ hyphen-ca,
+ libreoffice-grammarcheck-ca,
+ libreoffice-help-ca,
+ mythes-ca
+Description: office productivity suite -- Catalan language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Catalan.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-cs
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-cs | myspell-dictionary-cs,
+ hyphen-cs,
+ libreoffice-grammarcheck-cs,
+ libreoffice-help-cs,
+ mythes-cs
+Description: office productivity suite -- Czech language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Czech.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-cy
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-cy | myspell-dictionary-cy,
+ hyphen-cy,
+ libreoffice-grammarcheck-cy,
+ libreoffice-help-cy,
+ mythes-cy
+Description: office productivity suite -- Welsh language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Welsh.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-da
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-da | myspell-dictionary-da,
+ hyphen-da,
+ libreoffice-grammarcheck-da,
+ libreoffice-help-da,
+ mythes-da
+Description: office productivity suite -- Danish language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Danish.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-de
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-de | myspell-dictionary-de,
+ hyphen-de,
+ libreoffice-grammarcheck-de,
+ libreoffice-help-de,
+ mythes-de
+Description: office productivity suite -- German language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ German.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-dz
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: fonts-dzongkha, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-dz | myspell-dictionary-dz,
+ hyphen-dz,
+ libreoffice-grammarcheck-dz,
+ libreoffice-help-dz,
+ mythes-dz
+Description: office productivity suite -- Dzongkha language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Dzongkha.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-el
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-el | myspell-dictionary-el,
+ hyphen-el,
+ libreoffice-grammarcheck-el,
+ libreoffice-help-el,
+ mythes-el
+Description: office productivity suite -- Greek language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Greek.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-en-gb
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-en-gb | myspell-dictionary-en-gb,
+ hyphen-en-gb,
+ libreoffice-grammarcheck-en-gb,
+ libreoffice-help-en-gb,
+ mythes-en-gb
+Description: office productivity suite -- English_british language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ English_british.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-en-za
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-en-za | myspell-dictionary-en-za,
+ hyphen-en-za,
+ libreoffice-grammarcheck-en-za,
+ libreoffice-help-en-za,
+ mythes-en-za
+Description: office productivity suite -- English_southafrican language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ English_southafrican.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-eo
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-eo | myspell-dictionary-eo,
+ hyphen-eo,
+ libreoffice-grammarcheck-eo,
+ libreoffice-help-eo,
+ mythes-eo
+Description: office productivity suite -- Esperanto language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Esperanto.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-es
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-es | myspell-dictionary-es,
+ hyphen-es,
+ libreoffice-grammarcheck-es,
+ libreoffice-help-es,
+ mythes-es
+Description: office productivity suite -- Spanish language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Spanish.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-et
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-et | myspell-dictionary-et,
+ hyphen-et,
+ libreoffice-grammarcheck-et,
+ libreoffice-help-et,
+ mythes-et
+Description: office productivity suite -- Estonian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Estonian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-eu
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-eu | myspell-dictionary-eu,
+ hyphen-eu,
+ libreoffice-grammarcheck-eu,
+ libreoffice-help-eu,
+ mythes-eu
+Description: office productivity suite -- Basque language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Basque.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-fa
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: fonts-farsiweb, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-fa | myspell-dictionary-fa,
+ hyphen-fa,
+ libreoffice-grammarcheck-fa,
+ libreoffice-help-fa,
+ mythes-fa
+Description: office productivity suite -- Farsi language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Farsi.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-fi
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-fi | myspell-dictionary-fi | libreoffice-spellcheck-fi,
+ hyphen-fi | libreoffice-hyphenation-fi,
+ libreoffice-grammarcheck-fi,
+ libreoffice-help-fi,
+ mythes-fi
+Description: office productivity suite -- Finnish language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Finnish.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-fr
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-fr | myspell-dictionary-fr,
+ hyphen-fr,
+ libreoffice-grammarcheck-fr,
+ libreoffice-help-fr,
+ mythes-fr
+Description: office productivity suite -- French language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ French.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ga
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ga | myspell-dictionary-ga,
+ hyphen-ga,
+ libreoffice-grammarcheck-ga,
+ libreoffice-help-ga,
+ mythes-ga
+Description: office productivity suite -- Gaelic language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Gaelic.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-gd
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-gd | myspell-dictionary-gd,
+ hyphen-gd,
+ libreoffice-grammarcheck-gd,
+ libreoffice-help-gd,
+ mythes-gd
+Description: office productivity suite -- Scottish_gaelic language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Scottish_gaelic.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-gl
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-gl | myspell-dictionary-gl,
+ hyphen-gl,
+ libreoffice-grammarcheck-gl,
+ libreoffice-help-gl,
+ mythes-gl
+Description: office productivity suite -- Galician language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Galician.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-gu
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: fonts-gujr, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-gu | myspell-dictionary-gu,
+ hyphen-gu,
+ libreoffice-grammarcheck-gu,
+ libreoffice-help-gu,
+ mythes-gu
+Description: office productivity suite -- Gujarati language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Gujarati.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-gug
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-gug | myspell-dictionary-gug,
+ hyphen-gug,
+ libreoffice-grammarcheck-gug,
+ libreoffice-help-gug,
+ mythes-gug
+Description: office productivity suite -- Guarani language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Guarani.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-he
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: culmus, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-he | myspell-dictionary-he,
+ hyphen-he,
+ libreoffice-grammarcheck-he,
+ libreoffice-help-he,
+ mythes-he
+Description: office productivity suite -- Hebrew language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Hebrew.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-hi
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-hi | myspell-dictionary-hi,
+ hyphen-hi,
+ libreoffice-grammarcheck-hi,
+ libreoffice-help-hi,
+ mythes-hi
+Description: office productivity suite -- Hindi language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Hindi.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-hr
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-hr | myspell-dictionary-hr,
+ hyphen-hr,
+ libreoffice-grammarcheck-hr,
+ libreoffice-help-hr,
+ mythes-hr
+Description: office productivity suite -- Croatian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Croatian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-hu
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-hu | myspell-dictionary-hu,
+ hyphen-hu,
+ libreoffice-grammarcheck-hu,
+ libreoffice-help-hu,
+ mythes-hu
+Description: office productivity suite -- Hungarian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Hungarian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-id
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-id | myspell-dictionary-id,
+ hyphen-id,
+ libreoffice-grammarcheck-id,
+ libreoffice-help-id,
+ mythes-id
+Description: office productivity suite -- Indonesian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Indonesian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-is
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-is | myspell-dictionary-is,
+ hyphen-is,
+ libreoffice-grammarcheck-is,
+ libreoffice-help-is,
+ mythes-is
+Description: office productivity suite -- Icelandic language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Icelandic.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-it
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-it | myspell-dictionary-it,
+ hyphen-it,
+ libreoffice-grammarcheck-it,
+ libreoffice-help-it,
+ mythes-it
+Description: office productivity suite -- Italian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Italian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ja
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ja | myspell-dictionary-ja,
+ hyphen-ja,
+ libreoffice-grammarcheck-ja,
+ libreoffice-help-ja,
+ mythes-ja
+Description: office productivity suite -- Japanese language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Japanese.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ka
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ka | myspell-dictionary-ka,
+ hyphen-ka,
+ libreoffice-grammarcheck-ka,
+ libreoffice-help-ka,
+ mythes-ka
+Description: office productivity suite -- Georgian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Georgian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-kk
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-kk | myspell-dictionary-kk,
+ hyphen-kk,
+ libreoffice-grammarcheck-kk,
+ libreoffice-help-kk,
+ mythes-kk
+Description: office productivity suite -- Kazakh language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Kazakh.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-km
+Section: localization
+Architecture: all
+Depends: libreoffice-common,
+ locales (>= 2.3.5-12) | locales-all,
+ ${misc:Depends}
+Recommends: fonts-khmeros, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-km | myspell-dictionary-km,
+ hyphen-km,
+ libreoffice-grammarcheck-km,
+ libreoffice-help-km,
+ mythes-km
+Description: office productivity suite -- Khmer language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Khmer.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-kmr
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-kmr | myspell-dictionary-kmr,
+ hyphen-kmr,
+ libreoffice-grammarcheck-kmr,
+ libreoffice-help-kmr,
+ mythes-kmr
+Description: office productivity suite -- Kurmanji language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Kurmanji.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-kn
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-kn | myspell-dictionary-kn,
+ hyphen-kn,
+ libreoffice-grammarcheck-kn,
+ libreoffice-help-kn,
+ mythes-kn
+Description: office productivity suite -- Kannada language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Kannada.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ko
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ko | myspell-dictionary-ko,
+ hyphen-ko,
+ libreoffice-grammarcheck-ko,
+ libreoffice-help-ko,
+ mythes-ko
+Description: office productivity suite -- Korean language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Korean.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-lt
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-lt | myspell-dictionary-lt,
+ hyphen-lt,
+ libreoffice-grammarcheck-lt,
+ libreoffice-help-lt,
+ mythes-lt
+Description: office productivity suite -- Lithuanian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Lithuanian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-lv
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-lv | myspell-dictionary-lv,
+ hyphen-lv,
+ libreoffice-grammarcheck-lv,
+ libreoffice-help-lv,
+ mythes-lv
+Description: office productivity suite -- Latvian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Latvian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-mk
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-mk | myspell-dictionary-mk,
+ hyphen-mk,
+ libreoffice-grammarcheck-mk,
+ libreoffice-help-mk,
+ mythes-mk
+Description: office productivity suite -- Macedonian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Macedonian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-mn
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-mn | myspell-dictionary-mn,
+ hyphen-mn,
+ libreoffice-grammarcheck-mn,
+ libreoffice-help-mn,
+ mythes-mn
+Description: office productivity suite -- Mongolian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Mongolian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ml
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: fonts-mlym, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ml | myspell-dictionary-ml,
+ hyphen-ml,
+ libreoffice-grammarcheck-ml,
+ libreoffice-help-ml,
+ mythes-ml
+Description: office productivity suite -- Malayalam language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Malayalam.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-mr
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: fonts-deva, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-mr | myspell-dictionary-mr,
+ hyphen-mr,
+ libreoffice-grammarcheck-mr,
+ libreoffice-help-mr,
+ mythes-mr
+Description: office productivity suite -- Marathi language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Marathi.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-nb
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-nb | myspell-dictionary-nb,
+ hyphen-nb,
+ libreoffice-grammarcheck-nb,
+ libreoffice-help-nb,
+ mythes-nb
+Description: office productivity suite -- Norwegian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Norwegian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ne
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: fonts-deva, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ne | myspell-dictionary-ne,
+ hyphen-ne,
+ libreoffice-grammarcheck-ne,
+ libreoffice-help-ne,
+ mythes-ne
+Description: office productivity suite -- Nepalese language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Nepalese.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-nl
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-nl | myspell-dictionary-nl,
+ hyphen-nl,
+ libreoffice-grammarcheck-nl,
+ libreoffice-help-nl,
+ mythes-nl
+Description: office productivity suite -- Dutch language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Dutch.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-nn
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-nn | myspell-dictionary-nn,
+ hyphen-nn,
+ libreoffice-grammarcheck-nn,
+ libreoffice-help-nn,
+ mythes-nn
+Description: office productivity suite -- Norwegian_nynorsk language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Norwegian_nynorsk.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-nr
+Section: localization
+Architecture: all
+Depends: libreoffice-common,
+ locales (>= 2.3.6.ds1-1) | locales-all (>= 2.3.6.ds1-1),
+ ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-nr | myspell-dictionary-nr,
+ hyphen-nr,
+ libreoffice-grammarcheck-nr,
+ libreoffice-help-nr,
+ mythes-nr
+Description: office productivity suite -- Ndebele language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Ndebele.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-nso
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-nso | myspell-dictionary-nso,
+ hyphen-nso,
+ libreoffice-grammarcheck-nso,
+ libreoffice-help-nso,
+ mythes-nso
+Description: office productivity suite -- Northern_sotho language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Northern_sotho.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-oc
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-oc | myspell-dictionary-oc,
+ hyphen-oc,
+ libreoffice-grammarcheck-oc,
+ libreoffice-help-oc,
+ mythes-oc
+Description: office productivity suite -- Occitan language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Occitan.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-om
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-om | myspell-dictionary-om,
+ hyphen-om,
+ libreoffice-grammarcheck-om,
+ libreoffice-help-om,
+ mythes-om
+Description: office productivity suite -- Oromo language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Oromo.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-or
+Section: localization
+Architecture: all
+Depends: libreoffice-common,
+ locales (>= 2.3.6.ds1-1) | locales-all (>= 2.3.6.ds1-1),
+ ${misc:Depends}
+Recommends: fonts-orya, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-or | myspell-dictionary-or,
+ hyphen-or,
+ libreoffice-grammarcheck-or,
+ libreoffice-help-or,
+ mythes-or
+Description: office productivity suite -- Odia language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Odia.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-pa-in
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: fonts-guru, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-pa-in | myspell-dictionary-pa-in,
+ hyphen-pa-in,
+ libreoffice-grammarcheck-pa-in,
+ libreoffice-help-pa-in,
+ mythes-pa-in
+Description: office productivity suite -- Punjabi language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Punjabi.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-pl
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-pl | myspell-dictionary-pl,
+ hyphen-pl,
+ libreoffice-grammarcheck-pl,
+ libreoffice-help-pl,
+ mythes-pl
+Description: office productivity suite -- Polish language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Polish.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-pt
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-pt | myspell-dictionary-pt,
+ hyphen-pt,
+ libreoffice-grammarcheck-pt,
+ libreoffice-help-pt,
+ mythes-pt
+Description: office productivity suite -- Portuguese language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Portuguese.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-pt-br
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-pt-br | myspell-dictionary-pt-br,
+ hyphen-pt-br,
+ libreoffice-grammarcheck-pt-br,
+ libreoffice-help-pt-br,
+ mythes-pt-br
+Description: office productivity suite -- Portuguese_brazilian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Portuguese_brazilian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ro
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ro | myspell-dictionary-ro,
+ hyphen-ro,
+ libreoffice-grammarcheck-ro,
+ libreoffice-help-ro,
+ mythes-ro
+Description: office productivity suite -- Romanian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Romanian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ru
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ru | myspell-dictionary-ru,
+ hyphen-ru,
+ libreoffice-grammarcheck-ru,
+ libreoffice-help-ru,
+ mythes-ru
+Description: office productivity suite -- Russian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Russian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-rw
+Section: localization
+Architecture: all
+Depends: libreoffice-common,
+ locales (>= 2.3.6) | locales-all (>= 2.3.6),
+ ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-rw | myspell-dictionary-rw,
+ hyphen-rw,
+ libreoffice-grammarcheck-rw,
+ libreoffice-help-rw,
+ mythes-rw
+Description: office productivity suite -- Kinarwanda language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Kinarwanda.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-si
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-si | myspell-dictionary-si,
+ hyphen-si,
+ libreoffice-grammarcheck-si,
+ libreoffice-help-si,
+ mythes-si
+Description: office productivity suite -- Sinhala language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Sinhala.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-sk
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-sk | myspell-dictionary-sk,
+ hyphen-sk,
+ libreoffice-grammarcheck-sk,
+ libreoffice-help-sk,
+ mythes-sk
+Description: office productivity suite -- Slovak language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Slovak.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-sl
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-sl | myspell-dictionary-sl,
+ hyphen-sl,
+ libreoffice-grammarcheck-sl,
+ libreoffice-help-sl,
+ mythes-sl
+Description: office productivity suite -- Slovenian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Slovenian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-sr
+Section: localization
+Architecture: all
+Depends: libreoffice-common,
+ locales (>= 2.3.6.ds1-5) | locales-all,
+ ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-sr | myspell-dictionary-sr,
+ hyphen-sr,
+ libreoffice-grammarcheck-sr,
+ libreoffice-help-sr,
+ mythes-sr
+Description: office productivity suite -- Serbian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Serbian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ss
+Section: localization
+Architecture: all
+Depends: libreoffice-common,
+ locales (>= 2.3.5-12) | locales-all,
+ ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ss | myspell-dictionary-ss,
+ hyphen-ss,
+ libreoffice-grammarcheck-ss,
+ libreoffice-help-ss,
+ mythes-ss
+Description: office productivity suite -- Swazi language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Swazi.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-st
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-st | myspell-dictionary-st,
+ hyphen-st,
+ libreoffice-grammarcheck-st,
+ libreoffice-help-st,
+ mythes-st
+Description: office productivity suite -- Southern_sotho language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Southern_sotho.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-sv
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-sv | myspell-dictionary-sv,
+ hyphen-sv,
+ libreoffice-grammarcheck-sv,
+ libreoffice-help-sv,
+ mythes-sv
+Description: office productivity suite -- Swedish language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Swedish.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ta
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: fonts-taml, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ta | myspell-dictionary-ta,
+ hyphen-ta,
+ libreoffice-grammarcheck-ta,
+ libreoffice-help-ta,
+ mythes-ta
+Description: office productivity suite -- Tamil language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Tamil.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-te
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: fonts-telu, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-te | myspell-dictionary-te,
+ hyphen-te,
+ libreoffice-grammarcheck-te,
+ libreoffice-help-te,
+ mythes-te
+Description: office productivity suite -- Telugu language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Telugu.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-tg
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-tg | myspell-dictionary-tg,
+ hyphen-tg,
+ libreoffice-grammarcheck-tg,
+ libreoffice-help-tg,
+ mythes-tg
+Description: office productivity suite -- Tajik language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Tajik.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-th
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: fonts-thai-tlwg, libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-th | myspell-dictionary-th,
+ hyphen-th,
+ libreoffice-grammarcheck-th,
+ libreoffice-help-th,
+ mythes-th
+Description: office productivity suite -- Thai language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Thai.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-tn
+Section: localization
+Architecture: all
+Depends: libreoffice-common,
+ locales (>= 2.3.5-12) | locales-all,
+ ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-tn | myspell-dictionary-tn,
+ hyphen-tn,
+ libreoffice-grammarcheck-tn,
+ libreoffice-help-tn,
+ mythes-tn
+Description: office productivity suite -- Tswana language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Tswana.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-tr
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-tr | myspell-dictionary-tr,
+ hyphen-tr,
+ libreoffice-grammarcheck-tr,
+ libreoffice-help-tr,
+ mythes-tr
+Description: office productivity suite -- Turkish language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Turkish.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ts
+Section: localization
+Architecture: all
+Depends: libreoffice-common,
+ locales (>= 2.3.5-12) | locales-all,
+ ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ts | myspell-dictionary-ts,
+ hyphen-ts,
+ libreoffice-grammarcheck-ts,
+ libreoffice-help-ts,
+ mythes-ts
+Description: office productivity suite -- Tsonga language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Tsonga.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ug
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ug | myspell-dictionary-ug,
+ hyphen-ug,
+ libreoffice-grammarcheck-ug,
+ libreoffice-help-ug,
+ mythes-ug
+Description: office productivity suite -- Uighur language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Uighur.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-uk
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-uk | myspell-dictionary-uk,
+ hyphen-uk,
+ libreoffice-grammarcheck-uk,
+ libreoffice-help-uk,
+ mythes-uk
+Description: office productivity suite -- Ukrainian language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Ukrainian.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-uz
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-uz | myspell-dictionary-uz,
+ hyphen-uz,
+ libreoffice-grammarcheck-uz,
+ libreoffice-help-uz,
+ mythes-uz
+Description: office productivity suite -- Uzbek language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Uzbek.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-ve
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-ve | myspell-dictionary-ve,
+ hyphen-ve,
+ libreoffice-grammarcheck-ve,
+ libreoffice-help-ve,
+ mythes-ve
+Description: office productivity suite -- Venda language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Venda.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-vi
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-vi | myspell-dictionary-vi,
+ hyphen-vi,
+ libreoffice-grammarcheck-vi,
+ libreoffice-help-vi,
+ mythes-vi
+Description: office productivity suite -- Vietnamese language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Vietnamese.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-xh
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-xh | myspell-dictionary-xh,
+ hyphen-xh,
+ libreoffice-grammarcheck-xh,
+ libreoffice-help-xh,
+ mythes-xh
+Description: office productivity suite -- Xhosa language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Xhosa.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-zh-cn
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-zh-cn | myspell-dictionary-zh-cn,
+ hyphen-zh-cn,
+ libreoffice-grammarcheck-zh-cn,
+ libreoffice-help-zh-cn,
+ mythes-zh-cn
+Description: office productivity suite -- Chinese_simplified language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Chinese_simplified.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-zh-tw
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-zh-tw | myspell-dictionary-zh-tw,
+ hyphen-zh-tw,
+ libreoffice-grammarcheck-zh-tw,
+ libreoffice-help-zh-tw,
+ mythes-zh-tw
+Description: office productivity suite -- Chinese_traditional language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Chinese_traditional.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-l10n-zu
+Section: localization
+Architecture: all
+Depends: libreoffice-common, locales | locales-all, ${misc:Depends}
+Recommends: libreoffice-core (>> ${base-version})
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-zu | myspell-dictionary-zu,
+ hyphen-zu,
+ libreoffice-grammarcheck-zu,
+ libreoffice-help-zu,
+ mythes-zu
+Description: office productivity suite -- Zulu language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ Zulu.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
+Package: libreoffice-help-en-us
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-en-us,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- English_american help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ English_american.
+
+Package: libreoffice-help-ca
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-ca,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Catalan help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Catalan.
+
+Package: libreoffice-help-cs
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-cs,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Czech help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Czech.
+
+Package: libreoffice-help-da
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-da,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Danish help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Danish.
+
+Package: libreoffice-help-de
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-de,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- German help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ German.
+
+Package: libreoffice-help-dz
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-dz,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Dzongkha help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Dzongkha.
+
+Package: libreoffice-help-el
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-el,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Greek help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Greek.
+
+Package: libreoffice-help-en-gb
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-en-gb,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- English_british help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ English_british.
+
+Package: libreoffice-help-es
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-es,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Spanish help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Spanish.
+
+Package: libreoffice-help-et
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-et,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Estonian help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Estonian.
+
+Package: libreoffice-help-eu
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-eu,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Basque help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Basque.
+
+Package: libreoffice-help-fi
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-fi,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Finnish help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Finnish.
+
+Package: libreoffice-help-fr
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-fr,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- French help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ French.
+
+Package: libreoffice-help-gl
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-gl,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Galician help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Galician.
+
+Package: libreoffice-help-hi
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-hi,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Hindi help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Hindi.
+
+Package: libreoffice-help-hu
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-hu,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Hungarian help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Hungarian.
+
+Package: libreoffice-help-it
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-it,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Italian help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Italian.
+
+Package: libreoffice-help-ja
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-ja,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Japanese help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Japanese.
+
+Package: libreoffice-help-km
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-km,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Khmer help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Khmer.
+
+Package: libreoffice-help-ko
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-ko,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Korean help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Korean.
+
+Package: libreoffice-help-nl
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-nl,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Dutch help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Dutch.
+
+Package: libreoffice-help-om
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-om,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Oromo help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Oromo.
+
+Package: libreoffice-help-pl
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-pl,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Polish help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Polish.
+
+Package: libreoffice-help-pt
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-pt,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Portuguese help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Portuguese.
+
+Package: libreoffice-help-pt-br
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-pt-br,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Portuguese_brazilian help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Portuguese_brazilian.
+
+Package: libreoffice-help-ru
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-ru,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Russian help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Russian.
+
+Package: libreoffice-help-sk
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-help-cs,
+ libreoffice-l10n-sk,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Slovak help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Slovak.
+
+Package: libreoffice-help-sl
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-sl,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Slovenian help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Slovenian.
+
+Package: libreoffice-help-sv
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-sv,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Swedish help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Swedish.
+
+Package: libreoffice-help-tr
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-tr,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Turkish help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Turkish.
+
+Package: libreoffice-help-vi
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-vi,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Vietnamese help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Vietnamese.
+
+Package: libreoffice-help-zh-cn
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-zh-cn,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Chinese_simplified help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Chinese_simplified.
+
+Package: libreoffice-help-zh-tw
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-common (>= 1:6.1.0~),
+ libreoffice-l10n-zh-tw,
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- Chinese_traditional help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ Chinese_traditional.
+
+Package: uno-libs3
+Section: libs
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Replaces: ure (<< 1:5.0.0~rc2-1)
+Breaks: libreoffice-core (<< 1:4.3.0~)
+Description: LibreOffice UNO runtime environment -- public shared libraries
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ It offers you a flexible, low-overhead component model that is most ideal
+ for (but not limited to) combining in one application components written in
+ different computer languages, and developed by different parties. You can use
+ it to create any kind of application, in whatever application domain you can
+ imagine.
+ .
+ This package contains the public libraries:
+ - libuno_sal: System Abstraction Layer (C Interface)
+ - libuno_salhelpergcc3: additional C++ functionality for sal
+ - libuno_cppu: C++ UNO bridge (C Interface)
+ - libuno_cppuhelpergcc3: additional C++ functionality for cppu
+ - libuno_purpenvhelpergcc3: "purpose environments" helper
+
+Package: ure
+Section: libs
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: uno-libs3 (= ${ure:Version}), ${misc:Depends}, ${shlibs:Depends}
+Suggests: java5-runtime
+Replaces: libreoffice-common (<< 1:4.5.0), libreoffice-core (<< 1:5.3.0~beta1~)
+Breaks: libreoffice-common (<< 1:4.5.0), libreoffice-core (<< 1:5.3.0~beta1~)
+Description: LibreOffice UNO runtime environment
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ It offers you a flexible, low-overhead component model that is most ideal
+ for (but not limited to) combining in one application components written in
+ different computer languages, and developed by different parties. You can use
+ it to create any kind of application, in whatever application domain you can
+ imagine.
+
+Package: libreoffice-wiki-publisher
+Section: misc
+Architecture: all
+Depends: libreoffice-core,
+ ${java-common-depends},
+ ${java-runtime-depends},
+ ${java:Depends},
+ ${misc:Depends}
+Enhances: libreoffice-writer
+Suggests: mediawiki
+Description: LibreOffice extension for working with MediaWiki articles
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains an extension to create/edit/publish MediaWiki
+ articles with LibreOffice
+Homepage: http://extensions.services.openoffice.org/project/wikipublisher
+
+Package: libreoffice-report-builder
+Section: misc
+Architecture: all
+Depends: libreoffice-core,
+ libreoffice-java-common,
+ libreoffice-report-builder-bin (>= ${base-version}),
+ ${java:Depends},
+ ${misc:Depends},
+ ${report-builder-jar-depends}
+Provides: libreoffice-reportdesigner
+Enhances: libreoffice-base
+Description: LibreOffice component for building database reports
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the report builder:
+ "Create with the Sun Report Builder stylish, smart-looking database reports.
+ The flexible report editor can define group and page headers as well as
+ group and page footers and even calculation fields are available to
+ accomplish complex database reports."
+
+Package: libreoffice-report-builder-bin
+Section: misc
+Architecture: alpha amd64 arm64 armel armhf i386 ia64 m68k mips mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 powerpcspe kfreebsd-amd64 kfreebsd-i386
+Depends: libreoffice-base, libreoffice-core, ${misc:Depends}, ${shlibs:Depends}
+Description: LibreOffice component for building database reports -- libraries
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains some architecture-dependent support libraries
+ (librpt*.so) for the report builder component.
+
+Package: libreoffice-nlpsolver
+Architecture: all
+Depends: libreoffice-calc,
+ libreoffice-core,
+ ${java-common-depends},
+ ${java-runtime-depends},
+ ${misc:Depends}
+Section: math
+Description: "Solver for Nonlinear Programming" extension for LibreOffice
+ By default LibreOffice Calc ships with a solver engine for linear
+ programming only. This allows the optimization of models to a certain degree.
+ However, if the formulas or constraints become more complex,
+ nonlinear programming is required. That missing gap is now filled by the
+ Solver for Nonlinear Programming extension.
+ .
+ Currently it incorporates two Evolutionary Algorithms which are able to
+ handle floating point and integer variables as well as nonlinear constraints.
+
+Package: fonts-opensymbol
+Section: fonts
+Architecture: all
+Multi-Arch: foreign
+Depends: ${misc:Depends}
+Recommends: fontconfig
+Replaces: ttf-opensymbol
+Provides: ttf-opensymbol
+Description: OpenSymbol TrueType font
+ This package contains the OpenSymbol TrueType font included in
+ LibreOffice. This font contains symbols (like fonts as Wingdings(tm)),
+ bullets (needed for bullets in LibreOffice) and non-latin character
+
+Package: libreoffice-dev
+Section: devel
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: libreoffice-core (= ${binary:Version}),
+ libreoffice-dev-common (= ${source:Version}),
+ ${idlc-cpp-depends},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: g++, ${java-common-depends}, ${java-runtime-depends}
+Suggests: libmythes-dev, libreoffice-dev-doc, libreofficekit-dev
+Replaces: libreoffice-dev-common (<< 1:5.4.1~)
+Conflicts: libreoffice (<< 1:5.2.5-2~), libreoffice-dev-doc (<< 1:5.2.5-2~)
+Breaks: libreoffice-dev-common (<< 1:5.4.1~)
+Description: office productivity suite -- SDK -- architecture-dependent parts
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the (architecture-dependent) files needed to build
+ plugins/add-ons for LibreOffice (build tools, libraries, arch-dependent
+ includes, ...).
+ .
+ It also contains the gengal and ui-previewer utilities.
+
+Package: libreoffice-dev-common
+Section: devel
+Architecture: all
+Depends: ${misc:Depends}
+Replaces: libreoffice-dev (<< 1:5.2.0~)
+Breaks: libreoffice-dev (<< 1:5.2.0~)
+Conflicts: libreoffice (<< 1:5.2.5-2~)
+Description: office productivity suite -- SDK -- architecture-independent parts
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the (architecture-independent) files needed to build
+ plugins/add-ons for LibreOffice (includes, IDL files, ...)
+
+Package: libreoffice-dev-doc
+Section: doc
+Architecture: all
+Depends: ${misc:Depends}
+Recommends: libreoffice-dev (= ${binary:Version}), www-browser
+Conflicts: libreoffice (<< 1:5.2.5-2~),
+ libreoffice-dev (<= 1:5.0.3~rc1-2),
+ openoffice.org-dev-doc
+Build-Profiles: <!nodoc>
+Description: office productivity suite -- SDK documentation
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the documentation of the LibreOffice SDK:
+ .
+ * C++/Java API reference
+ * IDL reference
+ * C++/Java/Basic examples
+
+Package: libreofficekit-dev
+Section: libdevel
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: gir1.2-lokdocview-0.1 (= ${binary:Version}), ${misc:Depends}
+Suggests: libgtk-3-dev
+Recommends: libreoffice-core, libreofficekit-data
+Replaces: gir1.2-lokdocview-0.1 (<< 1:5.4.0~rc1)
+Description: LibreOfficeKit -- headers
+ LibreOfficeKit can be used for accessing LibreOffice functionality through
+ C/C++, without any need to use UNO.
+ .
+ For now it only offers document conversion (in addition to an experimental
+ tiled rendering API).
+ .
+ This package contains the headers needed for using LibreOfficeKit.
+
+Package: libreoffice-gtk2
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Section: gnome
+Enhances: libreoffice
+Replaces: libreoffice-gtk (<< 1:5.2.0~)
+Breaks: libreoffice-gtk (<< 1:5.2.0~)
+Description: office productivity suite -- GTK+ 2 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the Gtk plugin for drawing LibreOffices widgets
+ with Gtk+ 2 and a Gtk/GNOMEish File Picker and print dialog when running
+ under GNOME.
+
+Package: libreoffice-gtk3
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: libreofficekit-data
+Recommends: gstreamer1.0-gtk3
+Section: gnome
+Enhances: libreoffice
+Description: office productivity suite -- GTK+ 3 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the Gtk plugin for drawing LibreOffices widgets
+ with Gtk+ 3 and Gtk/GNOMEish print dialog when running under GNOME.
+
+Package: gir1.2-lokdocview-0.1
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Section: introspection
+Depends: liblibreofficekitgtk (= ${binary:Version}),
+ ${gir:Depends},
+ ${misc:Depends}
+Description: GTK3 widget wrapping LibreOffice functionality - introspection
+ LOKDocView is the GTK3 widget that wraps the libreoffice functionality and
+ exposes a simple API for applications to use this widget.
+ .
+ This package contains the Introspection data.
+
+Package: liblibreofficekitgtk
+Section: gnome
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: libreofficekit-data, ${misc:Depends}, ${shlibs:Depends}
+Replaces: libreoffice-gtk3 (<< 1:5.2.0~)
+Breaks: libreoffice-gtk3 (<< 1:5.2.0~)
+Recommends: libreoffice-gtk3
+Description: GTK3 widget wrapping LibreOffice functionality
+ This package contains a (basic) GTK+ document viewer widget (used
+ by e.g. LOKDocView)
+
+Package: libreofficekit-data
+Architecture: all
+Section: web
+Depends: ${misc:Depends}
+Recommends: gir1.2-lokdocview-0.1
+Description: common data for LOKDocView
+ LOKDocView is the GTK3 widget that wraps the libreoffice functionality and
+ exposes a simple API for applications to use this widget.
+ .
+ This package contains architecture-independent data (e.g. the selection
+ handlers).
+
+Package: libreoffice-kde5
+Architecture: alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: ${kde-iconset-dep}
+Replaces: libreoffice-kde (<< 1:6.1.0~alpha1-1)
+Section: kde
+Enhances: libreoffice
+Description: office productivity suite -- KDE 5 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the KDE plugin for LibreOffice and a KDEish File Picker
+ when running under KDE.
+
+Package: libreoffice-sdbc-postgresql
+Section: misc
+Architecture: alpha amd64 arm64 armel armhf i386 ia64 m68k mips mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 powerpcspe kfreebsd-amd64 kfreebsd-i386
+Depends: libreoffice-core, ${misc:Depends}, ${shlibs:Depends}
+Suggests: postgresql (>= 8.4)
+Enhances: libreoffice-base-drivers
+Description: PostgreSQL SDBC driver for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The PostgreSQL SDBC Driver allows one to use the PostgreSQL database from
+ LibreOffice without any wrapper layer such as ODBC or JDBC.
+Homepage: http://wiki.documentfoundation.org/PostgreSQL-SDBC
+
+Package: libreoffice-mysql-connector
+Section: misc
+Architecture: alpha amd64 arm64 armel armhf i386 ia64 m68k mips mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 powerpcspe kfreebsd-amd64 kfreebsd-i386
+Depends: libreoffice-core, ${misc:Depends}, ${shlibs:Depends}
+Suggests: default-mysql-server | virtual-mysql-server
+Homepage: http://extensions.services.openoffice.org/en/project/mysql_connector
+Description: MariaDB/MySQL Connector extension for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The MariaDB/MySQL Connector extension allows one to use the MariaDB or MySQL
+ database from LibreOffice without any wrapper layer such as ODBC or JDBC.
+
+Package: libreoffice-evolution
+Architecture: alpha amd64 arm64 armel armhf i386 ia64 m68k mips mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 powerpcspe kfreebsd-amd64 kfreebsd-i386
+Section: gnome
+Depends: libreoffice-base,
+ libreoffice-common,
+ libreoffice-core (= ${binary:Version}),
+ ${libebook-dep},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: evolution
+Description: office productivity suite -- Evolution addressbook support
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package allows LibreOffice to access Evolution address books.
+ You need to install evolution separately.
+
+Package: libreoffice-subsequentcheckbase
+Section: libs
+Architecture: all
+Depends: ${java:Depends}, ${misc:Depends}
+Build-Profiles: <!nocheck>
+Description: LibreOffice java test libraries
+ Java libraries LibreOffice subsequentchecks integration test suite
+
+Package: libreoffice-smoketest-data
+Section: misc
+Depends: ${misc:Depends}
+Architecture: all
+Build-Profiles: <!nocheck>
+Description: data files for LibreOffices "smoketest"
+ Data files for the LibreOffice "smoketest".
+
+Package: libreoffice-librelogo
+Section: misc
+Architecture: all
+Depends: libreoffice-core,
+ libreoffice-script-provider-python,
+ libreoffice-writer,
+ ${misc:Depends}
+Homepage: http://librelogo.org
+Description: Logo-like progamming language for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains Librelogo, which is a pyuno-based Logo-like progamming
+ language with interactive vectorgraphics for education and DTP
+ - basic Logo syntax for back compatibility with educational Logo systems
+ - interactive vectorgraphics in LibreOffice Writer
+ - native commands (easily translatable)
+ - Python data structures (list, tuple, set, dictionary) and other Python
+ features
+
+Package: libreoffice-sdbc-firebird
+Depends: libreoffice-core,
+ ${firebird-engine-depends},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Architecture: alpha amd64 arm64 armel armhf i386 ia64 m68k mips mipsel mips64el powerpc ppc64 ppc64el s390x sparc64 powerpcspe kfreebsd-amd64 kfreebsd-i386
+Section: database
+Enhances: libreoffice-base-drivers
+Description: Firebird SDBC driver for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The Firebird SDBC Driver allows one to use the Firebird database from
+ LibreOffice without any wrapper layer such as ODBC or JDBC.
+
+Package: libreoffice-pdfimport
+Section: oldlibs
+Architecture: all
+Depends: libreoffice-common (>= 1:5.4~),
+ libreoffice-core (>= 1:5.4~),
+ ${misc:Depends}
+Description: transitional package for PDF Import component for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package formerly contained a component enabling LibreOffice to import PDF
+ Documents. This now has been merged back into the "main" packages and this
+ package thus can be safely removed once installed.
+
+Package: libreoffice-kde
+Section: oldlibs
+Architecture: all
+Depends: libreoffice-kde5, ${misc:Depends}
+Description: transitional package for LibreOffice KDE integration
+ This package used to contain the LibreOffice KDE 4 backend. The package has
+ been renamed to libreoffice-kdeX and this package now depends on the new
+ libreoffice-kde5 packages.
+ .
+ You can safely remove this package.
+
+Package: libreoffice-ogltrans
+Section: oldlibs
+Architecture: all
+Depends: libreoffice-impress (>= 1:6.1.4-2~), ${misc:Depends}
+Description: transitional package for libreoffice-ogltrans
+ This package used to contain the OpenGL slide transitions for LibreOffice
+ Impress.
+ That has been merged into libreoffice-impress directly and thus this package
+ can be safely removed.
+
--- /dev/null
+Package: libreoffice-evolution
+Architecture: %OOO_BASE_ARCHS%
+Section: gnome
+Depends: libreoffice-base,
+ libreoffice-common,
+ libreoffice-core (= ${binary:Version}),
+ ${libebook-dep},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: evolution
+Description: office productivity suite -- Evolution addressbook support
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package allows LibreOffice to access Evolution address books.
+ You need to install evolution separately.
+
--- /dev/null
+Package: libreoffice-sdbc-firebird
+Depends: libreoffice-core, ${shlibs:Depends}, ${misc:Depends}, ${firebird-engine-depends}
+Architecture: %OOO_FIREBIRD_ARCHS%
+Section: database
+Enhances: libreoffice-base-drivers
+Description: Firebird SDBC driver for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The Firebird SDBC Driver allows one to use the Firebird database from
+ LibreOffice without any wrapper layer such as ODBC or JDBC.
+
--- /dev/null
+Package: fonts-opensymbol
+Section: fonts
+Architecture: all
+Multi-Arch: foreign
+Depends: ${misc:Depends}
+Recommends: fontconfig
+Replaces: ttf-opensymbol
+Provides: ttf-opensymbol
+Description: OpenSymbol TrueType font
+ This package contains the OpenSymbol TrueType font included in
+ LibreOffice. This font contains symbols (like fonts as Wingdings(tm)),
+ bullets (needed for bullets in LibreOffice) and non-latin character
+
--- /dev/null
+Package: libreoffice-gtk2
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Section: gnome
+Enhances: libreoffice
+Replaces: libreoffice-gtk (<< 1:5.2.0~)
+Breaks: libreoffice-gtk (<< 1:5.2.0~)
+Description: office productivity suite -- GTK+ 2 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the Gtk plugin for drawing LibreOffices widgets
+ with Gtk+ 2 and a Gtk/GNOMEish File Picker and print dialog when running
+ under GNOME.
+
--- /dev/null
+Package: libreoffice-gtk3
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: libreofficekit-data
+Recommends: gstreamer1.0-gtk3
+Section: gnome
+Enhances: libreoffice
+Description: office productivity suite -- GTK+ 3 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the Gtk plugin for drawing LibreOffices widgets
+ with Gtk+ 3 and Gtk/GNOMEish print dialog when running under GNOME.
+
+Package: gir1.2-lokdocview-0.1
+Architecture: %OOO_ARCHS%
+Section: introspection
+Depends: ${gir:Depends}, ${misc:Depends}, liblibreofficekitgtk (= ${binary:Version})
+Description: GTK3 widget wrapping LibreOffice functionality - introspection
+ LOKDocView is the GTK3 widget that wraps the libreoffice functionality and
+ exposes a simple API for applications to use this widget.
+ .
+ This package contains the Introspection data.
+
+Package: liblibreofficekitgtk
+Section: gnome
+Architecture: %OOO_ARCHS%
+Depends: ${shlibs:Depends}, ${misc:Depends}, libreofficekit-data
+Replaces: libreoffice-gtk3 (<< 1:5.2.0~)
+Breaks: libreoffice-gtk3 (<< 1:5.2.0~)
+Recommends: libreoffice-gtk3
+Description: GTK3 widget wrapping LibreOffice functionality
+ This package contains a (basic) GTK+ document viewer widget (used
+ by e.g. LOKDocView)
+
+Package: libreofficekit-data
+Architecture: all
+Section: web
+Depends: ${misc:Depends}
+Recommends: gir1.2-lokdocview-0.1
+Description: common data for LOKDocView
+ LOKDocView is the GTK3 widget that wraps the libreoffice functionality and
+ exposes a simple API for applications to use this widget.
+ .
+ This package contains architecture-independent data (e.g. the selection
+ handlers).
+
--- /dev/null
+Package: libreoffice-help-@LCODE@
+Architecture: all
+Section: doc
+Recommends: libreoffice-core (>> ${base-version})
+Depends: libreoffice-l10n-@LCODE@,
+ libreoffice-common (>= 1:6.1.0~),
+ ${help-depends},
+ ${misc:Depends}
+Provides: libreoffice-help (= ${help-l10n-virtual-version})
+Replaces: libreoffice-help-common (<< 1:6.1.0~beta1)
+Description: office productivity suite -- @LNAME@ help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the help of LibreOffice in
+ @LNAME@.
+
--- /dev/null
+Source: libreoffice
+Section: editors
+Priority: optional
+Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
+Uploaders: Rene Engelhard <rene@debian.org>, Chris Halls <halls@debian.org>
+Build-Depends: %BUILD_DEPS%,
+Build-Depends-Indep: %BUILD_DEPS_INDEP%
+Build-Conflicts: nvidia-glx-dev,
+ nvidia-glx-legacy-dev,
+ amd-libopencl1,
+ nvidia-libopencl1
+Standards-Version: 4.0.1
+Vcs-Git: https://salsa.debian.org/libreoffice-team/libreoffice/libreoffice.git
+Vcs-Browser: https://salsa.debian.org/libreoffice-team/libreoffice/libreoffice
+Bugs: @BUGS@
+Homepage: http://www.libreoffice.org
+
+Package: libreoffice
+Architecture: %OOO_ARCHS%
+Section: metapackages
+Depends: libreoffice-base%OOO_NO_BASE_ARCHS%,
+ libreoffice-calc,
+ libreoffice-core (= ${binary:Version}),
+ libreoffice-draw,
+ libreoffice-impress,
+ libreoffice-math,
+ libreoffice-report-builder-bin%OOO_NO_REPORTBUILDER_ARCHS%,
+ libreoffice-writer,
+ ${avmedia-be-depends},
+ ${misc:Depends},
+ ${pyuno-depends}
+Recommends: ${java-common-depends},
+ fonts-sil-gentium-basic,
+ fonts-crosextra-caladea,
+ fonts-crosextra-carlito,
+ fonts-dejavu,
+ fonts-liberation,
+ fonts-liberation2,
+ fonts-linuxlibertine,
+ fonts-noto-mono,
+ libreoffice-script-provider-bsh,
+ libreoffice-script-provider-js,
+ libreoffice-script-provider-python,
+ libreoffice-librelogo,
+ libreoffice-nlpsolver,
+ libreoffice-report-builder%OOO_NO_REPORTBUILDER_ARCHS%,
+ libreoffice-wiki-publisher,
+ libreoffice-sdbc-postgresql
+Suggests: cups-bsd,
+ ghostscript,
+ hunspell-dictionary,
+ hyphen-hyphenation-patterns,
+ firefox-esr | thunderbird | firefox,
+ imagemagick | graphicsmagick-imagemagick-compat,
+ libgl1,
+ libreoffice-grammarcheck,
+ libreoffice-help (= ${help-l10n-virtual-version}),
+ libreoffice-l10n (= ${help-l10n-virtual-version}),
+ ${libsane-suggests},
+ libxrender1,
+ myspell-dictionary,
+ mythes-thesaurus,
+ openclipart2-libreoffice | openclipart-libreoffice,
+ pstoedit,
+ unixodbc,
+ gnupg,
+ gpa,
+ ${gstreamer-plugins-suggests},
+ ${java-runtime-depends},
+ ${ooo-officebean-dep},
+ %LO-DESKTOP-INTEGRATION%
+Conflicts: libreoffice-dev (<= 1:5.0.3~rc1-2), libreoffice-dev-doc (<= 1:5.0.3~rc1-2)
+Description: office productivity suite (metapackage)
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This metapackage installs all components of libreoffice:
+ * libreoffice-writer: Word processor
+ * libreoffice-calc: Spreadsheet
+ * libreoffice-impress: Presentation
+ * libreoffice-draw: Drawing
+ * libreoffice-base: Database
+ * libreoffice-math: Equation editor
+ It also recommends additional packages (e.g. fonts) in order to match an
+ upstream LibreOffice install as closely as possible.
+ .
+ You can extend the functionality of LibreOffice by installing these
+ packages:
+ * hunspell-*/myspell-*: Hunspell/Myspell dictionaries
+ for use with LibreOffice
+ * libreoffice-l10n-*: UI interface translation
+ * libreoffice-help-*: User help
+ * mythes-*: Thesauri for the use with LibreOffice
+ * hyphen-*: Hyphenation patterns for LibreOffice
+ * libreoffice-gtk(2|3): Gtk UI Plugin, GNOME File Picker support
+ * libreoffice-gnome: GIO backend
+ * unixodbc: ODBC database support
+ * cups-bsd: Allows LibreOffice to detect your CUPS printer queues
+ automatically
+ * libsane: Use your sane-supported scanner with LibreOffice
+ * libxrender1: Speed up display by using Xrender library
+ * libgl1: OpenGL support
+ * openclipart-libreoffice: Open Clip Art Gallery with LibreOffice index
+ files
+ * firefox-esr | thunderbird | firefox:
+ Mozilla profile with Certificates needed for XML Security...
+ * openjdk-9-jre | openjdk-8-jre | openjdk-7-jre | java6-runtime:
+ Java Runtime Environment for use with LibreOffice
+ * pstoedit / imagemagick / ghostscript: helper tools for EPS
+ * gstreamer0.10-plugins-*: GStreamer plugins for use with LibreOffices
+ media backend
+ * libpaper-utils: papersize detection support via paperconf
+
+Package: libreoffice-l10n-za
+Section: metapackages
+Architecture: all
+Depends: libreoffice-l10n-af,
+ libreoffice-l10n-en-za,
+ libreoffice-l10n-nr,
+ libreoffice-l10n-nso,
+ libreoffice-l10n-ss,
+ libreoffice-l10n-st,
+ libreoffice-l10n-tn,
+ libreoffice-l10n-ts,
+ libreoffice-l10n-ve,
+ libreoffice-l10n-xh,
+ libreoffice-l10n-zu,
+ ${misc:Depends}
+Description: office productivity suite -- South African language packages
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package is a metapackage installing l10n packages for all 11 South
+ African languages.
+
+Package: libreoffice-l10n-in
+Section: metapackages
+Architecture: all
+Depends: libreoffice-l10n-as,
+ libreoffice-l10n-bn,
+ libreoffice-l10n-gu,
+ libreoffice-l10n-hi,
+ libreoffice-l10n-ml,
+ libreoffice-l10n-mr,
+ libreoffice-l10n-or,
+ libreoffice-l10n-pa-in,
+ libreoffice-l10n-ta,
+ libreoffice-l10n-te,
+ ${misc:Depends}
+Recommends: fonts-indic
+Description: office productivity suite -- Indic language packages
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package is a metapackage installing l10n packages for all available
+ indic languages.
+
+Package: libreoffice-core
+Architecture: %OOO_ARCHS%
+Depends: fontconfig,
+ fonts-opensymbol,
+ libreoffice-common (>> ${base-version}),
+ ure (>= 6.1.1~),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: libpaper-utils
+Breaks: libreoffice-base (<< ${binary:Version}),
+ libreoffice-calc (<< ${binary:Version}),
+ libreoffice-dev (<< ${binary:Version}),
+ libreoffice-draw (<< ${binary:Version}),
+ libreoffice-evolution (<< ${binary:Version}),
+ libreoffice-gnome (<< ${binary:Version}),
+ libreoffice-gtk2 (<< ${binary:Version}),
+ libreoffice-gtk3 (<< ${binary:Version}),
+ libreoffice-impress (<< ${binary:Version}),
+ libreoffice-kde4 (<< ${binary:Version}),
+ libreoffice-kde5 (<< ${binary:Version}),
+ libreoffice-officebean (<< ${binary:Version}),
+ libreoffice-writer (<< ${binary:Version}),
+ browser-plugin-libreoffice,
+ libreoffice-pdfimport (<< 1:5.4~),
+ libreoffice-common (<< 1:5.4.1)
+Conflicts: libreoffice-filter-binfilter, libreoffice-unbundled
+Provides: libreoffice-bundled
+Replaces: libreoffice-pdfimport (<< 1:5.4~), libreoffice-common (<< 1:5.4.1)
+Description: office productivity suite -- arch-dependent files
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the architecture-dependent core files of
+ LibreOffice. See the libreoffice package for more information.
+
+Package: libreoffice-common
+Architecture: all
+Depends: libreoffice-style-colibre, libreoffice-style-tango, ure, ${numbertext-data-recommends}, ${misc:Depends}
+Suggests: libreoffice-style,
+Recommends: ${pyuno-depends}, ${textcat-data-recommends}, xdg-utils, fonts-liberation2 | ttf-mscorefonts-installer
+Conflicts: openoffice-unbundled,
+ broffice,
+ libreoffice-filter-mobiledev,
+ libreoffice-l10n-4.3,
+ libreoffice-l10n-4.4,
+ libreoffice-wiki-publisher (<< 1.2.0+LibO5.4.0~rc2)
+Provides: libreoffice-l10n-en-us
+Breaks: libreoffice-core (<< 1:${oover}~),
+ libreoffice-help-5.2,
+ libreoffice-help (<< 5.4),
+ libreoffice-core (>= 1:${next-oover}~),
+ libreoffice-style-andromeda (<< 1:${oover}~),
+ libreoffice-style-crystal (<< 1:${oover}~),
+ libreoffice-style-crystal (>= 1:${next-oover}~),
+ libreoffice-style-galaxy (<< 1:${oover}~),
+ libreoffice-style-galaxy (>= 1:${next-oover}~),
+ libreoffice-style-hicontrast (<< 1:${oover}~),
+ libreoffice-style-hicontrast (>= 1:${next-oover}~),
+ libreoffice-style-tango (<< 1:${oover}~),
+ libreoffice-style-tango (>= 1:${next-oover}~),
+ libreoffice-writer2latex (<< 1.0.2-9),
+ libreoffice-writer2xhtml (<< 1.0.2-9)
+Replaces: libreoffice-pdfimport (<< 1:5.4~)
+Description: office productivity suite -- arch-independent files
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the architecture-independent files of
+ LibreOffice.
+
+Package: libreoffice-java-common
+Architecture: all
+Depends: libreoffice-common, ${java:Depends}, ${misc:Depends}
+Description: office productivity suite -- arch-independent Java support files
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the architecture-independent files of
+ the Java support for LibreOffice (Java classes, scripts, config snippets).
+
+Package: libreoffice-help-common
+Architecture: all
+Depends: libreoffice-common, ${help-common-depends}, ${misc:Depends}
+Breaks: libreoffice-common (<< 1:6.1.0~alpha1-1)
+Replaces: libreoffice-common (<< 1:6.1.0~alpha1-1)
+Description: office productivity suite -- common files for LibreOffice help
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the common files (e.g. language-independent, media) files
+ for the LibreOffice Help.
+
+Package: libreoffice-writer
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-base-core (= ${binary:Version})%OOO_NO_BASE_ARCHS%,
+ libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: libreoffice-math,
+Suggests: fonts-crosextra-caladea,
+ fonts-crosextra-carlito,
+ libreoffice-base,
+ ${java-common-depends},
+ ${java-runtime-depends}
+Replaces: libreoffice-common (<< 1:5.4.1)
+Breaks: libreoffice-common (<< 1:5.4.1)
+Description: office productivity suite -- word processor
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the wordprocessor component for LibreOffice.
+
+Package: libreoffice-calc
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-base-core (= ${binary:Version})%OOO_NO_BASE_ARCHS%,
+ libreoffice-core (= ${binary:Version}),
+ ${lpsolve-dep},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: ocl-icd-libopencl1 | mesa-opencl-icd | beignet-opencl-icd
+Replaces: libreoffice-common (<< 1:5.4.1)
+Breaks: libreoffice-common (<< 1:5.4.1)
+Description: office productivity suite -- spreadsheet
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the spreadsheet component for LibreOffice.
+
+Package: libreoffice-impress
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ libreoffice-draw (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Replaces: libreoffice-common (<< 1:5.4.1), libreoffice-ogltrans (<< 1:6.1.4-2~)
+Conflicts: libreoffice-ogltrans (<< 1:6.1.4-2~)
+Provides: libreoffice-ogltrans
+Breaks: libreoffice-common (<< 1:5.4.1)
+Recommends: ${avmedia-be-depends}
+Description: office productivity suite -- presentation
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the presentation component for LibreOffice.
+
+Package: libreoffice-draw
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Replaces: libreoffice-impress (<< 1:5.2.0-2), libreoffice-common (<< 1:5.4.1)
+Breaks: libreoffice-impress (<< 1:5.2.0-2), libreoffice-common (<< 1:5.4.1)
+Description: office productivity suite -- drawing
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the drawing component for LibreOffice.
+
+Package: libreoffice-math
+Architecture: %OOO_ARCHS%
+Depends: fonts-opensymbol,
+ libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Description: office productivity suite -- equation editor
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the equation editor component for LibreOffice.
+
+Package: libreoffice-base-core
+Architecture: %OOO_BASE_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: libreoffice-base
+Replaces: libreoffice-base-drivers (<< 1:6.1.1~rc1-2)
+Description: office productivity suite -- shared library
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains common libraries of LibreOffice Base used by
+ Base, Writer and Calc.
+ .
+ If you need full Base functionality (or actual database drivers), please
+ install libreoffice-base (and/or libreoffice-base-drivers and/o
+ libreoffice-sdbc-*).
+
+Package: libreoffice-base
+Architecture: %OOO_BASE_ARCHS%
+Section: database
+Depends: libreoffice-base-core (= ${binary:Version}),
+ libreoffice-base-drivers (= ${binary:Version}),
+ libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: libreoffice-report-builder,
+ unixodbc
+Recommends: libreoffice-writer, ${java-common-depends}, ${java-runtime-depends}
+Replaces: libreoffice-common (<< 1:4.3.0~beta1)
+Description: office productivity suite -- database
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the database component for LibreOffice.
+
+Package: libreoffice-style-breeze
+Architecture: all
+Enhances: libreoffice-core
+Depends: libreoffice-style-tango, ${misc:Depends}
+Suggests: breeze-icon-theme
+Provides: libreoffice-style
+Description: office productivity suite -- Breeze symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "breeze" symbol style, default style for KDE 5.
+
+Package: libreoffice-style-colibre
+Architecture: all
+Enhances: libreoffice-core
+Depends: ${misc:Depends}
+Provides: libreoffice-style
+Description: office productivity suite -- colibre symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "colibre" symbol style - a icon theme
+ which follow Microsoft(R) Offices color scheme.
+
+Package: libreoffice-style-tango
+Architecture: all
+Enhances: libreoffice-core
+Depends: ${misc:Depends}
+Suggests: tango-icon-theme
+Provides: libreoffice-style
+Replaces: libreoffice-common (<= 1:4.3.0~beta2-2)
+Description: office productivity suite -- Tango symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "tango" symbol style.
+
+Package: libreoffice-style-sifr
+Architecture: all
+Enhances: libreoffice-core
+Depends: libreoffice-style-breeze, ${misc:Depends}
+Provides: libreoffice-style, libreoffice-style-hicontrast
+Replaces: libreoffice-style-hicontrast
+Conflicts: libreoffice-style-hicontrast
+Description: office productivity suite -- Sifr symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "sifr" symbol style (an adaption of the Gnome
+ symbolic theme), needs to be manually enabled in the LibreOffice option
+ menu.
+
+Package: libreoffice-style-elementary
+Architecture: all
+Depends: libreoffice-style-tango, ${misc:Depends}
+Enhances: libreoffice-core
+Provides: libreoffice-style
+Description: office productivity suite -- Elementary symbol style
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the "elementary" symbol style, default style
+ for GTK+/Gnome.
+
+Package: libreoffice-gnome
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: ${gnome-gtk-recommends}, libreoffice-style-elementary
+Suggests: libreoffice-evolution, seahorse
+Section: gnome
+Enhances: libreoffice
+Provides: libreoffice-gtk-gnome
+Replaces: libreoffice-gtk (<< 1:5.0.0~rc2-1)
+Description: office productivity suite -- GNOME integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the GIO support.
+ .
+ You can extend the functionality of this by installing these packages:
+ .
+ * libreoffice-evolution: Evolution addressbook support
+ * evolution
+
+Package: python3-uno
+Section: python
+Architecture: %OOO_ARCHS%
+Enhances: libreoffice
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${python3:Depends},
+ ${shlibs:Depends}
+Conflicts: python-uno
+Replaces: libreoffice-core (= 1:4.3.0~beta1-1), libreoffice-common (<< 1:4.4.0~beta2)
+Description: Python-UNO bridge
+ The Python-UNO bridge allows use of the standard LibreOffice API
+ with the Python scripting language. It additionally allows
+ others to develop UNO components in Python, thus Python UNO components
+ may be run within the LibreOffice process and can be called from C++
+ or the built in StarBasic scripting language.
+Homepage: http://udk.openoffice.org/python/python-bridge.html
+
+Package: libreoffice-officebean
+Architecture: %OOO_JAVA_ARCHS%
+Section: java
+Depends: libreoffice-core (= ${binary:Version}),
+ ${java-common-depends},
+ ${java-runtime-depends},
+ ${java:Depends},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Description: office productivity suite -- Java bean
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the LibreOffice Office Bean for embedding
+ LibreOffice in custom Java applications.
+
+Package: libreoffice-script-provider-python
+Architecture: all
+Section: python
+Depends: libreoffice-common,
+ libreoffice-core,
+ ${misc:Depends},
+ ${python:Depends},
+ ${pyuno-depends}
+Description: Python script support provider for LibreOffice scripting framework
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The Scripting Framework allows LibreOffice users to write and run macros
+ in multiple languages including LibreOffice Basic, Python, Java, BeanShell
+ and JavaScript. These macros can then be assigned to menus, toolbars,
+ keyboard shortcuts, events and embedded objects.
+ .
+ This package contains the script provider to support Python.
+
+Package: libreoffice-script-provider-bsh
+Architecture: all
+Section: java
+Depends: libreoffice-common,
+ libreoffice-core,
+ ${java-common-depends},
+ ${java:Depends},
+ ${java-runtime-depends},
+ ${misc:Depends}
+Description: BeanShell script support provider for LibreOffice scripting framework
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The Scripting Framework allows LibreOffice users to write and run macros
+ in multiple languages including LibreOffice Basic, Python, Java, BeanShell
+ and JavaScript. These macros can then be assigned to menus, toolbars,
+ keyboard shortcuts, events and embedded objects.
+ .
+ This package contains the script provider to support BeanShell.
+
+Package: libreoffice-script-provider-js
+Architecture: all
+Section: web
+Depends: libreoffice-common,
+ libreoffice-core,
+ ${java-common-depends},
+ ${java:Depends},
+ ${java-runtime-depends},
+ ${misc:Depends}
+Description: JavaScript script support provider for LibreOffice scripting framework
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The Scripting Framework allows LibreOffice users to write and run macros
+ in multiple languages including LibreOffice Basic, Python, Java, BeanShell
+ and JavaScript. These macros can then be assigned to menus, toolbars,
+ keyboard shortcuts, events and embedded objects.
+ .
+ This package contains the script provider to support JavaScript.
+
+Package: libreoffice-avmedia-backend-gstreamer
+Section: misc
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core, ${misc:Depends}, ${shlibs:Depends}
+Recommends: gstreamer1.0-plugins-bad
+Provides: libreoffice-avmedia-backend
+Description: GStreamer backend for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains a GStreamer backend for LibreOffices avmedia component
+ to play audio/video.
+
+Package: libreoffice-avmedia-backend-vlc
+Section: misc
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core, ${misc:Depends}, ${shlibs:Depends}, ${libvlc-dep}
+Provides: libreoffice-avmedia-backend
+Description: VLC backend for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains a VLC backend for LibreOffices avmedia component
+ to play audio/video.
+
+Package: libreoffice-sdbc-hsqldb
+Depends: libreoffice-core, ${java-common-depends}, ${java:Depends}, ${java-runtime-depends}, ${shlibs:Depends}, ${misc:Depends}
+Architecture: %OOO_JAVA_ARCHS%
+Section: database
+Enhances: libreoffice-base-drivers
+Description: HSQLDB SDBC driver for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The HSQLDB SDBC Driver allows one to use the HSQLDB embedded database from
+ LibreOffice without any wrapper layer such as ODBC or JDBC.
+
+Package: libreoffice-base-drivers
+Depends: libreoffice-core, ${shlibs:Depends}, ${misc:Depends}
+Architecture: %OOO_BASE_ARCHS%
+Section: database
+Suggests: libreoffice-sdbc-postgresql | odbc-postgresql | libpg-java,
+ libreoffice-mysql-connector | libmyodbc | libmariadb-java,
+ libsqliteodbc | tdsodbc | mdbtools,
+ libjtds-java,
+Recommends: libreoffice-sdbc-hsqldb [%OOO_JAVA_ARCHS%], ${base-firebird-recommends}
+Replaces: libreoffice-base (<< 1:4.3.0-3)
+Breaks: libreoffice-base (<< 1:4.3.0-3)
+Description: Database connectivity drivers for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the database connectivity drivers used by LibreOffices
+ database functionality:
+ - ODBC
+ - JDBC
+ - dBase
+ - Calc
+ - Flat files
+ - MySQL
+ .
+ You can extend this by installing:
+ .
+ * unixodbc: ODBC database support
+ * libmyodbc | odbc-postgresql | libsqliteodbc | tdsodbc | mdbtools: ODBC
+ drivers for:
+ - MySQL
+ - PostgreSQL
+ - SQLite
+ - MS SQL / Sybase SQL
+ - *.mdb (JET / MS Access)
+ * libmariadb-java | libpg-java | libjtds-java: JDBC Drivers
+ for:
+ - MySQL/MariaDB
+ - PostgreSQL
+ - MS SQL Server and Sybase
+ * libreoffice-sdbc-hsqldb: embedded HSQLDB SDBC Driver
+ * libreoffice-sdbc-firebird: Firebird SDBC Driver
+ * libreoffice-sdbc-postgresql: PostgreSQL SDBC Driver
+ * libreoffice-mysql-connector: "native" MySQL Connector
+
--- /dev/null
+Package: libreoffice-kde4
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: ${kde-iconset-dep}
+Suggests: kmail, konqueror, kleopatra | kgpg
+Replaces: libreoffice-kde (<< 1:6.1.0~alpha1-1)
+Section: kde
+Enhances: libreoffice
+Replaces: libreoffice-core (= 1:4.3.0~beta1-1)
+Description: office productivity suite -- KDE 4 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the KDE plugin for drawing LibreOffices widgets with
+ KDE/Qt and a KDEish File Picker when running under KDE.
+ You can extend the functionality of this by installing these packages:
+ .
+ * konqueror / kmail
+
--- /dev/null
+Package: libreoffice-kde5
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: ${kde-iconset-dep}
+Replaces: libreoffice-kde (<< 1:6.1.0~alpha1-1)
+Section: kde
+Enhances: libreoffice
+Description: office productivity suite -- KDE 5 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the KDE plugin for LibreOffice and a KDEish File Picker
+ when running under KDE.
+
--- /dev/null
+Package: libreoffice-l10n-@LCODE@
+Section: localization
+Architecture: all
+Depends: libreoffice-common, ${misc:Depends}, @LOCALES_DEPENDS@
+Recommends: libreoffice-core (>> ${base-version}) @FONT_RECOMMENDS@
+Provides: libreoffice-l10n (= ${help-l10n-virtual-version})
+Suggests: hunspell-dictionary-@LCODE@ | myspell-dictionary-@LCODE@,
+ hyphen-@LCODE@,
+ libreoffice-grammarcheck-@LCODE@,
+ libreoffice-help-@LCODE@,
+ mythes-@LCODE@
+Description: office productivity suite -- @LNAME@ language package
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the localization of LibreOffice in
+ @LNAME@.
+ It contains the user interface, the templates and the autotext features.
+ (please note that not all this is available for all possible languages).
+ You can switch user interface language using the locales system.
+ .
+ Spelling dictionaries, hyphenation patterns, thesauri and help are not
+ included in this package. There are some available in separate packages
+ (myspell-*, hyphen-*, mythes-*, libreoffice-help-*)
+ .
+ If you just want to be able to spellcheck etc. in other languages, you can
+ install extra dictionaries/hyphenation patterns/thesauri independently of
+ the language packs.
+
--- /dev/null
+Package: libreoffice-librelogo
+Section: misc
+Architecture: all
+Depends: libreoffice-core,
+ libreoffice-writer,
+ libreoffice-script-provider-python,
+ ${misc:Depends}
+Homepage: http://librelogo.org
+Description: Logo-like progamming language for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains Librelogo, which is a pyuno-based Logo-like progamming
+ language with interactive vectorgraphics for education and DTP
+ - basic Logo syntax for back compatibility with educational Logo systems
+ - interactive vectorgraphics in LibreOffice Writer
+ - native commands (easily translatable)
+ - Python data structures (list, tuple, set, dictionary) and other Python
+ features
+
--- /dev/null
+Package: libreofficekit-dev
+Section: libdevel
+Architecture: %OOO_ARCHS%
+Depends: ${misc:Depends}, gir1.2-lokdocview-0.1 (= ${binary:Version})
+Suggests: libgtk-3-dev
+Recommends: libreoffice-core, libreofficekit-data
+Replaces: gir1.2-lokdocview-0.1 (<< 1:5.4.0~rc1)
+Description: LibreOfficeKit -- headers
+ LibreOfficeKit can be used for accessing LibreOffice functionality through
+ C/C++, without any need to use UNO.
+ .
+ For now it only offers document conversion (in addition to an experimental
+ tiled rendering API).
+ .
+ This package contains the headers needed for using LibreOfficeKit.
+
--- /dev/null
+Package: libreoffice-wiki-publisher
+Section: misc
+Architecture: all
+Depends: libreoffice-core,
+ ${java-common-depends},
+ ${java:Depends},
+ ${java-runtime-depends},
+ ${misc:Depends}
+Enhances: libreoffice-writer
+Suggests: mediawiki
+Description: LibreOffice extension for working with MediaWiki articles
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains an extension to create/edit/publish MediaWiki
+ articles with LibreOffice
+Homepage: http://extensions.services.openoffice.org/project/wikipublisher
+
--- /dev/null
+Package: libreoffice-mysql-connector
+Section: misc
+Architecture: %OOO_BASE_ARCHS%
+Depends: libreoffice-core, ${misc:Depends}, ${shlibs:Depends}
+Suggests: default-mysql-server | virtual-mysql-server
+Homepage: http://extensions.services.openoffice.org/en/project/mysql_connector
+Description: MariaDB/MySQL Connector extension for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The MariaDB/MySQL Connector extension allows one to use the MariaDB or MySQL
+ database from LibreOffice without any wrapper layer such as ODBC or JDBC.
+
--- /dev/null
+Package: libreoffice-nlpsolver
+Architecture: all
+Depends: ${misc:Depends}, libreoffice-calc, libreoffice-core, ${java-common-depends}, ${java-runtime-depends}
+Section: math
+Description: "Solver for Nonlinear Programming" extension for LibreOffice
+ By default LibreOffice Calc ships with a solver engine for linear
+ programming only. This allows the optimization of models to a certain degree.
+ However, if the formulas or constraints become more complex,
+ nonlinear programming is required. That missing gap is now filled by the
+ Solver for Nonlinear Programming extension.
+ .
+ Currently it incorporates two Evolutionary Algorithms which are able to
+ handle floating point and integer variables as well as nonlinear constraints.
+
--- /dev/null
+Package: libreoffice-sdbc-postgresql
+Section: misc
+Architecture: %OOO_BASE_ARCHS%
+Depends: libreoffice-core,
+ ${misc:Depends},
+ ${shlibs:Depends}
+Suggests: postgresql (>= 8.4)
+Enhances: libreoffice-base-drivers
+Description: PostgreSQL SDBC driver for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ The PostgreSQL SDBC Driver allows one to use the PostgreSQL database from
+ LibreOffice without any wrapper layer such as ODBC or JDBC.
+Homepage: http://wiki.documentfoundation.org/PostgreSQL-SDBC
+
--- /dev/null
+Package: libreoffice-qt5
+Architecture: %OOO_64BIT_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ ${misc:Depends},
+ ${shlibs:Depends}
+Enhances: libreoffice
+Description: office productivity suite -- Qt 5 integration
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the Qt 5 plugin for drawing LibreOffices widgets
+ with Qt 5 and a Qt File Picker and print dialog.
+
--- /dev/null
+Package: libreoffice-report-builder
+Section: misc
+Architecture: all
+Depends: libreoffice-core,
+ libreoffice-java-common,
+ libreoffice-report-builder-bin (>= ${base-version}),
+ ${java:Depends},
+ ${misc:Depends},
+ ${report-builder-jar-depends}
+Provides: libreoffice-reportdesigner
+Enhances: libreoffice-base
+Description: LibreOffice component for building database reports
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the report builder:
+ "Create with the Sun Report Builder stylish, smart-looking database reports.
+ The flexible report editor can define group and page headers as well as
+ group and page footers and even calculation fields are available to
+ accomplish complex database reports."
+
+Package: libreoffice-report-builder-bin
+Section: misc
+Architecture: %OOO_REPORTBUILDER_ARCHS%
+Depends: libreoffice-core,
+ libreoffice-base,
+ ${misc:Depends},
+ ${shlibs:Depends}
+Description: LibreOffice component for building database reports -- libraries
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains some architecture-dependent support libraries
+ (librpt*.so) for the report builder component.
+
--- /dev/null
+Package: libreoffice-dev
+Section: devel
+Architecture: %OOO_ARCHS%
+Depends: libreoffice-core (= ${binary:Version}),
+ libreoffice-dev-common (= ${source:Version}),
+ ${idlc-cpp-depends},
+ ${misc:Depends},
+ ${shlibs:Depends}
+Recommends: g++, ${java-common-depends}, ${java-runtime-depends}
+Suggests: libmythes-dev, libreofficekit-dev, libreoffice-dev-doc
+Replaces: libreoffice-dev-common (<< 1:5.4.1~)
+Conflicts: libreoffice-dev-doc (<< 1:5.2.5-2~), libreoffice (<< 1:5.2.5-2~)
+Breaks: libreoffice-dev-common (<< 1:5.4.1~)
+Description: office productivity suite -- SDK -- architecture-dependent parts
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the (architecture-dependent) files needed to build
+ plugins/add-ons for LibreOffice (build tools, libraries, arch-dependent
+ includes, ...).
+ .
+ It also contains the gengal and ui-previewer utilities.
+
+Package: libreoffice-dev-common
+Section: devel
+Architecture: all
+Depends: ${misc:Depends}
+Replaces: libreoffice-dev (<< 1:5.2.0~)
+Breaks: libreoffice-dev (<< 1:5.2.0~)
+Conflicts: libreoffice (<< 1:5.2.5-2~)
+Description: office productivity suite -- SDK -- architecture-independent parts
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the (architecture-independent) files needed to build
+ plugins/add-ons for LibreOffice (includes, IDL files, ...)
+
+Package: libreoffice-dev-doc
+Section: doc
+Architecture: all
+Depends: ${misc:Depends}
+Recommends: libreoffice-dev (= ${binary:Version}),
+ www-browser
+Conflicts: openoffice.org-dev-doc, libreoffice-dev (<= 1:5.0.3~rc1-2), libreoffice (<< 1:5.2.5-2~)
+Build-Profiles: <!nodoc>
+Description: office productivity suite -- SDK documentation
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package contains the documentation of the LibreOffice SDK:
+ .
+ * C++/Java API reference
+ * IDL reference
+ * C++/Java/Basic examples
+
--- /dev/null
+Package: libreoffice-subsequentcheckbase
+Section: libs
+Architecture: all
+Depends: ${java:Depends}, ${misc:Depends}
+Build-Profiles: <!nocheck>
+Description: LibreOffice java test libraries
+ Java libraries LibreOffice subsequentchecks integration test suite
+
+Package: libreoffice-smoketest-data
+Section: misc
+Depends: ${misc:Depends}
+Architecture: all
+Build-Profiles: <!nocheck>
+Description: data files for LibreOffices "smoketest"
+ Data files for the LibreOffice "smoketest".
+
--- /dev/null
+Package: libreoffice-pdfimport
+Section: oldlibs
+Architecture: all
+Depends: libreoffice-core (>= 1:5.4~), libreoffice-common (>= 1:5.4~), ${misc:Depends}
+Description: transitional package for PDF Import component for LibreOffice
+ LibreOffice is a full-featured office productivity suite that provides
+ a near drop-in replacement for Microsoft(R) Office.
+ .
+ This package formerly contained a component enabling LibreOffice to import PDF
+ Documents. This now has been merged back into the "main" packages and this
+ package thus can be safely removed once installed.
+
+Package: libreoffice-kde
+Section: oldlibs
+Architecture: all
+Depends: libreoffice-kde5, ${misc:Depends}
+Description: transitional package for LibreOffice KDE integration
+ This package used to contain the LibreOffice KDE 4 backend. The package has
+ been renamed to libreoffice-kdeX and this package now depends on the new
+ libreoffice-kde5 packages.
+ .
+ You can safely remove this package.
+
+Package: libreoffice-ogltrans
+Section: oldlibs
+Architecture: all
+Depends: libreoffice-impress (>= 1:6.1.4-2~), ${misc:Depends}
+Description: transitional package for libreoffice-ogltrans
+ This package used to contain the OpenGL slide transitions for LibreOffice
+ Impress.
+ That has been merged into libreoffice-impress directly and thus this package
+ can be safely removed.
+
--- /dev/null
+Package: uno-libs3
+Section: libs
+Architecture: %OOO_ARCHS%
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Replaces: ure (<< 1:5.0.0~rc2-1)
+Breaks: libreoffice-core (<< 1:4.3.0~)
+Description: LibreOffice UNO runtime environment -- public shared libraries
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ It offers you a flexible, low-overhead component model that is most ideal
+ for (but not limited to) combining in one application components written in
+ different computer languages, and developed by different parties. You can use
+ it to create any kind of application, in whatever application domain you can
+ imagine.
+ .
+ This package contains the public libraries:
+ - libuno_sal: System Abstraction Layer (C Interface)
+ - libuno_salhelpergcc3: additional C++ functionality for sal
+ - libuno_cppu: C++ UNO bridge (C Interface)
+ - libuno_cppuhelpergcc3: additional C++ functionality for cppu
+ - libuno_purpenvhelpergcc3: "purpose environments" helper
+
+Package: ure
+Section: libs
+Architecture: %OOO_ARCHS%
+Depends: uno-libs3 (= ${ure:Version}), ${misc:Depends}, ${shlibs:Depends}
+Suggests: java5-runtime
+Replaces: libreoffice-common (<< 1:4.5.0), libreoffice-core (<< 1:5.3.0~beta1~)
+Breaks: libreoffice-core (<< 1:5.3.0~beta1~), libreoffice-common (<< 1:4.5.0)
+Description: LibreOffice UNO runtime environment
+ The Uno Runtime Environment (URE) is the well-known UNO component model
+ of LibreOffice, packaged up as an individual product.
+ .
+ It offers you a flexible, low-overhead component model that is most ideal
+ for (but not limited to) combining in one application components written in
+ different computer languages, and developed by different parties. You can use
+ it to create any kind of application, in whatever application domain you can
+ imagine.
+
--- /dev/null
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: LibreOffice
+Upstream-Contact: libreoffice@lists.freedesktop.org
+Source: http://download.documentfoundation.org/libreoffice
+# they are already removed when packing the upstream tarballs, but are in git...
+#Files-Excluded: schema/*/*
+
+Files: *
+Copyright: Copyright 2000, 2010 Oracle and/or its affiliates.
+ Copyright (c) 2000, 2010 LibreOffice contributors and/or their affiliates.
+License: MPL-2.0
+ On Debian systems the full text of the MPL-2.0 can be found in
+ /usr/share/common-licenses/MPL-2.0.
+ .
+ Some files include Apache-2.0 licensed material:
+ .
+ # This file incorporates work covered by the following license notice:
+ #
+ # Licensed to the Apache Software Foundation (ASF) under one or more
+ # contributor license agreements. See the NOTICE file distributed
+ # with this work for additional information regarding copyright
+ # ownership. The ASF licenses this file to you under the Apache
+ # License, Version 2.0 (the "License"); you may not use this file
+ # except in compliance with the License. You may obtain a copy of
+ # the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ .
+ On Debian systems the full text of the Apache-2.0 license can be found in
+ /usr/share/common-licenses/Apache-2.0.
+
+Files: extras/source/truetype/symbol/OpenSymbol.sfd
+Copyright: (c) 2009 Sun Microsystems Inc.
+ (c) 2010 Google Corporation
+ (c) 2011 Julien Nabet
+ (c) 2011 Olivier Hallot
+ (c) 2013 Mathias Hasselmann
+ (c) 2015 Khaled Hosny
+ (c) 2016 Mike Kaganski
+License: MPL-2.0
+ On Debian systems the full text of the MPL-2.0 can be found in
+ /usr/share/common-licenses/MPL-2.0.
+ .
+ Some files include Apache-2.0 licensed material:
+ .
+ # This file incorporates work covered by the following license notice:
+ #
+ # Licensed to the Apache Software Foundation (ASF) under one or more
+ # contributor license agreements. See the NOTICE file distributed
+ # with this work for additional information regarding copyright
+ # ownership. The ASF licenses this file to you under the Apache
+ # License, Version 2.0 (the "License"); you may not use this file
+ # except in compliance with the License. You may obtain a copy of
+ # the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ .
+ On Debian systems the full text of the Apache-2.0 license can be found in
+ /usr/share/common-licenses/Apache-2.0.
+
+Files: swext/mediawiki/src/filter/odt2mediawiki.xsl
+Copyright: Copyright (C) 2007-2013 Bernhard Haumacher (haui@haumacher.de)
+License: Apache-2.0
+
+Files: sysui/desktop/apparmor/*
+Copyright: Copyright (C) 2016 Canonical Ltd.
+ Copyright (C) 2017 Software in the Public Interest, Inc.
+License: MPL-2.0
+
+Files: icon-themes/breeze*/*
+Copyright: Copyright 2014 Uri Herrera <kaisergreymon99@gmail.com>
+ Copyright 2015 Andreas Kainz <kainz.a@gmail.com> and other contributors
+License: GPL-2+
+
+Files: icon-themes/sifr*/*
+Copyright: Jakub Steiner <jimmac@novell.com>
+ Lapo Calamandrei <calamandrei@gmail.com>
+ Hylke Bons <hylke.bons@intel.com>
+ Barbara Muraus <barbara.muraus@gmail.com>
+ Issa Alkurtass <ialkurtass@kacst.edu.sa>
+ Norah Abanumay <nabanimy@kacst.edu.sa>
+ Copyright 2017-2018 Matthias Freund <matti_lx@mailbox.org>
+License: CC-BY-SA-3.0
+
+Files: icon-themes/tango*/*
+Copyright: Alexander Wilms <f.alexander.wilms@gmail.com> and Miroslav Mazel <mazelm@gmail.com>
+License: CC-BY-SA-3.0
+
+Files: icon-themes/tango*/cmd/lc_crop.png
+Copyright: Copyright 2014 by Daniel Foré <daniel@elementaryos.org>
+License: GPL-2+
+
+Files: icon_themes/elementary*/*
+Copyright: Copyright 2015 by Simon Steinbeiss <simon@xfce.org>, Pasi Lallinaho <pasi@shimmerproject.org>
+License: GPL-3+
+
+Files: icon-themes/colibre*/*
+Copyright: Copyright 2018 Andreas Kainz <kainz.a@gmail.com>
+License: CC0-1.0
+
+https://github.com/rizmut/libreoffice-style-karasa-jaga/blob/master/COPYING
+Files: icon-themes/karasa_jaga/*
+Copyright: Copyright (c) 2014 Rizal Muttaqin <sundaralinux@gmail.com>
+License: LGPL-3+
+
+Files: helpcontent2/help3xsl/fuse.js
+Copyright: Copyright (c) 2012-2017 Kirollos Risk (http://kiro.me)
+License: Apache-2.0
+
+Files: helpcontent2/help3xsl/paginathing.js
+Copyright: (C) 2018 Alfred Crosby <https://github.com/alfredcrosby>
+License: Expat
+
+Files: helpcontent2/help3xsl/normalize.css
+Copyright: Copyright © Nicolas Gallagher and Jonathan Neal
+License: Expat
+
+Files: debian/*
+Copyright: Copyright (C) 2002-2009 Software in the Public Interest, Inc.
+License: GPL-2
+
+Files: debian/scripts/get_ttf_version.pl
+Copyright: Copyright (C) 2015 Software in the Public Interest, Inc.
+License: MPL-2.0
+
+Files: debian/templates/debian-presentation.otp
+Copyright: Copyright (C) 2010 Raphaël Hertzog
+License: GPL-2+
+
+Files: debian/templates/debian-presentation-background.xcf
+Copyright: Copyright Alexis Younes "ayo"
+License: GPL-2+
+
+Files: tarballs/*rhino*
+Copyright: Copyright (C) 1997-2000 Netscape Communications Corporation
+ Copyright (C) 2000 See Beyond Communications Corporation
+License: MPL-1.1 or GPL-2 or LGPL-2
+
+Files: tarballs/*xsltml*
+Copyright: Copyright (C) 2001-2003 Vasil Yaroshevich
+License: other
+ Permission is hereby granted, free of charge, to any person
+ obtaining a copy of this software and associated documentation
+ files (the ``Software''), to deal in the Software without
+ restriction, including without limitation the rights to use,
+ copy, modify, merge, publish, distribute, sublicense, and/or
+ sell copies of the Software, and to permit persons to whom the
+ Software is furnished to do so, subject to the following
+ conditions:
+ .
+ The above copyright notice and this permission notice shall be
+ included in all copies or substantial portions of the Software.
+ .
+ Except as contained in this notice, the names of individuals
+ credited with contribution to this software shall not be used in
+ advertising or otherwise to promote the sale, use or other
+ dealings in this Software without prior written authorization
+ from the individuals in question.
+ .
+ Any stylesheet derived from this Software that is publically
+ distributed will be identified with a different name and the
+ version strings in any derived Software will be changed so that
+ no possibility of confusion between the derived package and this
+ Software will exist.
+
+Files: tarballs/*swingEx*
+Copyright: Copyright 2008 by Sun Microsystems, Inc.
+License: LGPL-3
+ On Debian systems the full text of the LGPL-3 can be found in
+ /usr/share/common-licenses/LGPL-3
+
+Files: tarballs/*pdfium*
+Copyright: // Copyright 2014-2016 PDFium Authors.
+ // Original code copyright 2014 Foxit Software Inc.
+License: other
+ // Redistribution and use in source and binary forms, with or without
+ // modification, are permitted provided that the following conditions are
+ // met:
+ //
+ // * Redistributions of source code must retain the above copyright
+ // notice, this list of conditions and the following disclaimer.
+ // * Redistributions in binary form must reproduce the above
+ // copyright notice, this list of conditions and the following disclaimer
+ // in the documentation and/or other materials provided with the
+ // distribution.
+ // * Neither the name of Google Inc. nor the names of its
+ // contributors may be used to endorse or promote products derived from
+ // this software without specific prior written permission.
+ //
+ // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+License: Expat
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+ .
+ The above copyright notice and this permission notice shall be
+ included in all copies or substantial portions of the Software.
+ .
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+License: MPL-2.0
+ On Debian systems the full text of the MPL-2.0 can be found in
+ /usr/share/common-licenses/MPL-2.0.
+
+License: Apache-2.0
+ On Debian systems the full text of the Apache-2.0 license can be found in
+ /usr/share/common-licenses/Apache-2.0.
+
+License: GPL-2+
+ On Debian systems the full text of the GPL-2 can be found in
+ /usr/share/common-licenses/GPL-2
+
+License: GPL-3+
+ On Debian systems the full text of the GPL-3 can be found in
+ /usr/share/common-licenses/GPL-3
+
+License: GPL-2
+ On Debian systems the full text of the GPL-2 can be found in
+ /usr/share/common-licenses/GPL-2
+
+License: MPL-1.1
+ On Debian systems the full text of the MPL-1.1 can be found in
+ /usr/share/common-licenses/MPL-1.1
+
+License: LGPL-2
+ On Debian systems the full text of the LGPL-2 can be found in
+ /usr/share/common-licenses/LGPL-2
+
+License: LGPL-3+
+ On Debian systems the full text of the LGPL-3 can be found in
+ /usr/share/common-licenses/LGPL-3
+
+License: CC0-1.0
+ On Debian systems the full text of the CC0-1.0 license can be found in
+ /usr/share/common-licenses/CC0-1.0
+
+
--- /dev/null
+usr/lib/libreoffice/program/liblibreofficekitgtk.so usr/lib/liblibreofficekitgtk.so
--- /dev/null
+libreoffice (1:6.1.3-2) unstable; urgency=low
+
+ * The JDBC Driver used for JDBC Access by the LibreOffice MySQL driver
+ (NOT libreoffice-mysql-connector) contained in this package has been
+ changed from MySQL to MariaDB (libmysql-java -> libmariadb-java). See
+ http://bugs.debian.org/913360 and https://bugs.debian.org/912916.
+
+ This also involves changing the classes used in the code, so using
+ libmysql-java and com.mysql.jdbc.Driver does not work anymore.
+
+ If you want to connect to MySQL or MariaDB databases over JDBC, use
+ libmariadb-java.
+
+ -- Rene Engelhard <rene@debian.org> Fri, 16 Nov 2018 19:35:22 +0100
--- /dev/null
+libreoffice (1:4.2.1-1) experimental; urgency=low
+
+ * the database drivers have been split out to a new libreoffice-base-drivers
+ package. This package depends on most of them, but that explicitly
+ _does not_ include the HSQLDB SDBC Driver or the new Firebird SDBC Driver
+ (both for the embedded database) - whose because of their dependencies are
+ split into extra packages.
+ .
+ If you used a "normal" embedded database in your (old) database file you
+ _must_ install libreoffice-sdbc-hsqldb so that it can "connect" to it.
+ .
+ Similar with the new Firebird embedded database in 4.2 and -sdbc-firebird.
+
+ -- Rene Engelhard <rene@debian.org> Fri, 16 Aug 2013 10:21:53 +0200
--- /dev/null
+report-with: libreoffice-core
+package-status: unixodbc libmyodbc odbc-postgresql libsqliteodbc tdsodbc mdbtools libmariadb-java libmysql-java libpg-java libsapdbc-java
--- /dev/null
+libreoffice-base: desktop-command-not-in-package usr/share/applications/libreoffice-base.desktop libreoffice
--- /dev/null
+debian/tmp/usr/share/man/man1/lobase.1.gz
--- /dev/null
+###
+# shared-mime-info
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.database; soffice --nologo --base '%s'; edit=soffice --nologo --base '%s'; print=soffice --nologo --base -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument Database"; nametemplate=%s.odb; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.base; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; description="OpenOffice.org Database"; nametemplate=%s.sdb; priority=8
+
+#
+###
--- /dev/null
+#!/bin/sh
+
+set -e
+
+#INCLUDE_SHELL_LIB#
+
+if [ "$1" = remove -o "$1" = abort-install -o "$1" = disappear ]; then
+ dpkg-divert --remove --rename \
+ --divert /usr/lib/libreoffice/share/basic/dialog.xlc.noaccess \
+ /usr/lib/libreoffice/share/basic/dialog.xlc
+ dpkg-divert --remove --rename \
+ --divert /usr/lib/libreoffice/share/basic/script.xlc.noaccess \
+ /usr/lib/libreoffice/share/basic/script.xlc
+fi
+if [ "$1" = abort-upgrade ] && dpkg --compare-versions "$2" lt 1:4.3.0~beta1-1; then
+ dpkg-divert --remove --rename \
+ --divert /usr/lib/libreoffice/share/basic/dialog.xlc.noaccess \
+ /usr/lib/libreoffice/share/basic/dialog.xlc
+ dpkg-divert --remove --rename \
+ --divert /usr/lib/libreoffice/share/basic/script.xlc.noaccess \
+ /usr/lib/libreoffice/share/basic/script.xlc
+fi
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+set -e
+
+#INCLUDE_SHELL_LIB#
+
+if [ upgrade != "$1" ] || dpkg --compare-versions "$2" lt 1:4.3.0~beta1-1; then
+ dpkg-divert --add --rename \
+ --divert /usr/lib/libreoffice/share/basic/dialog.xlc.noaccess \
+ /usr/lib/libreoffice/share/basic/dialog.xlc
+ dpkg-divert --add --rename \
+ --divert /usr/lib/libreoffice/share/basic/script.xlc.noaccess \
+ /usr/lib/libreoffice/share/basic/script.xlc
+fi
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+report-with: libreoffice-core
--- /dev/null
+libreoffice-calc: binary-or-shlib-defines-rpath
+libreoffice-calc: desktop-command-not-in-package usr/share/applications/libreoffice-calc.desktop libreoffice
--- /dev/null
+debian/tmp/usr/share/man/man1/localc.1.gz
+
--- /dev/null
+###
+# shared-mime-info
+
+# Generic
+text/csv; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; test=test -n "$DISPLAY"; description="CSV Document"; nametemplate=%s.csv; priority=3
+text/spreadsheet; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; test=test -n "$DISPLAY"; description="Spreadsheet Interchange Document"; nametemplate=%s.slk; priority=3
+
+# Corel Quattro Pro
+application/x-quattropro; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; test=test -n "$DISPLAY"; description="Quattro Pro 6 for Windows Spreadsheet"; nametemplate=%s.wb2; priority=3
+
+# dBase dBASE
+application/x-dbf; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; test=test -n "$DISPLAY"; description="xBase Document"; nametemplate=%s.dbf; priority=3
+
+# ECMA Office Open XML (Microsoft Office 2007)
+application/vnd.ms-excel.sheet.macroEnabled.12; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; test=test -n "$DISPLAY"; description="Office Open XML Spreadsheet with Macros Enabled"; nametemplate=%s.xlsm; priority=3
+application/vnd.ms-excel.template.macroEnabled.12; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; test=test -n "$DISPLAY"; description="Office Open XML Spreadsheet Template with Macros Enabled"; nametemplate=%s.xltm; priority=3
+application/vnd.openxmlformats-officedocument.spreadsheetml.sheet; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; test=test -n "$DISPLAY"; description="Office Open XML Spreadsheet"; nametemplate=%s.xlsx; priority=3
+application/vnd.openxmlformats-officedocument.spreadsheetml.template; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; test=test -n "$DISPLAY"; description="Office Open XML Spreadsheet Template"; nametemplate=%s.xltx; priority=3
+
+# IBM Lotus 1-2-3
+application/vnd.lotus-1-2-3; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; test=test -n "$DISPLAY"; description="Lotus 1-2-3 spreadsheet"; nametemplate=%s.123; priority=3
+
+# Microsoft Excel
+application/vnd.ms-excel; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; test=test -n "$DISPLAY"; description="Microsoft Excel Document"; nametemplate=%s.xls; priority=3
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.chart; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; print=soffice --nologo --calc -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument Chart"; nametemplate=%s.odc; priority=9
+application/vnd.oasis.opendocument.spreadsheet; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; print=soffice --nologo --calc -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument Spreadsheet"; nametemplate=%s.ods; priority=9
+application/vnd.oasis.opendocument.spreadsheet-template; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; print=soffice --nologo --calc -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument Spreadsheet Template"; nametemplate=%s.ots; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.calc; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; test=test -n "$DISPLAY"; description="OpenOffice.org Spreadsheet"; nametemplate=%s.sxc; priority=8
+application/vnd.sun.xml.calc.template; soffice --nologo --calc '%s'; edit=soffice --nologo --calc '%s'; test=test -n "$DISPLAY"; description="OpenOffice.org Spreadsheet Template"; nametemplate=%s.stc; priority=8
+
+#
+###
+
--- /dev/null
+report-with: python-uno python3-uno
--- /dev/null
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-database.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.database.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-drawing.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.drawing.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-drawing-template.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.drawing-template.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-formula.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.formula.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-master-document.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.master-document.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-presentation.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.presentation.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-presentation-template.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.presentation-template.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-spreadsheet.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.spreadsheet.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-spreadsheet-template.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.spreadsheet-template.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-text.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.text.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-text-template.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.text-template.png
+usr/share/icons/hicolor/16x16/mimetypes/libreoffice-oasis-web-template.png usr/share/icons/hicolor/16x16/mimetypes/application-vnd.oasis.opendocument.web-template.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-database.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.database.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-drawing.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.drawing.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-drawing-template.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.drawing-template.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-formula.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.formula.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-master-document.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.master-document.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-presentation.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.presentation.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-presentation-template.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.presentation-template.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-spreadsheet.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.spreadsheet.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-spreadsheet-template.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.spreadsheet-template.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-text.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.text.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-text-template.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.text-template.png
+usr/share/icons/hicolor/32x32/mimetypes/libreoffice-oasis-web-template.png usr/share/icons/hicolor/32x32/mimetypes/application-vnd.oasis.opendocument.web-template.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-database.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.database.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-drawing.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.drawing.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-drawing-template.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.drawing-template.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-formula.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.formula.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-master-document.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.master-document.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-presentation.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.presentation.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-presentation-template.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.presentation-template.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-spreadsheet.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.spreadsheet.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-spreadsheet-template.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.spreadsheet-template.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-text.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.text.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-text-template.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.text-template.png
+usr/share/icons/hicolor/48x48/mimetypes/libreoffice-oasis-web-template.png usr/share/icons/hicolor/48x48/mimetypes/application-vnd.oasis.opendocument.web-template.png
--- /dev/null
+# this is essentially a breaks with version
+libreoffice-common: breaks-without-version libreoffice-help-5.2
--- /dev/null
+mv_conffile /etc/apparmor.d/usr.lib.libreofficeprogram.oosplash /etc/apparmor.d/usr.lib.libreoffice.program.oosplash 1:5.4.3-1
+mv_conffile /etc/apparmor.d/usr.lib.libreofficeprogram.senddoc /etc/apparmor.d/usr.lib.libreoffice.program.senddoc 1:5.4.3-1
+mv_conffile /etc/apparmor.d/usr.lib.libreofficeprogram.soffice.bin /etc/apparmor.d/usr.lib.libreoffice.program.soffice.bin 1:5.4.3-1
+mv_conffile /etc/apparmor.d/usr.lib.libreofficeprogram.xpdfimport /etc/apparmor.d/usr.lib.libreoffice.program.xpdfimport 1:5.4.3-1
+
--- /dev/null
+debian/tmp/usr/share/man/man1/libreoffice.1.gz
+debian/tmp/usr/share/man/man1/loffice.1.gz
+debian/tmp/usr/share/man/man1/unopkg.1.gz
+debian/tmp/usr/share/man/man1/lofromtemplate.1.gz
--- /dev/null
+#!/bin/sh
+
+set -e
+
+#INCLUDE_SHELL_LIB#
+
+if [ "$1" = "triggered" ]; then
+ for triggername in $2; do
+ case "$triggername" in
+ # new "bundled" extensions (since 3.3)
+ "/@OODIR@/share/extensions")
+ make_lo_sync_extensions
+ ;;
+ "/@OODIR@")
+ # check also whether /usr/bin/loolwsd-systemplate-setup
+ # is +x do to not fail when it's gone but
+ # /var/lib/lool/systemplate is still there (loolwsd
+ # removed but not purged)
+ if [ -x /usr/bin/loolwsd-systemplate-setup -a \
+ -d /var/lib/lool/systemplate ]; then
+ update_lool_systemplate
+ fi
+ ;;
+ esac
+ done
+fi
+
+#DEBHELPER#
+
--- /dev/null
+#!/bin/sh
+
+set -e
+
+#INCLUDE_SHELL_LIB#
+
+case "$1" in
+ remove|abort-install|abort-upgrade)
+ rm -rf /`echo @OODIR@ | sed -e s,usr/,var/,g`/share/prereg/bundled
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g`/share/prereg/ || true
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g`/share/ || true
+ # this belongs to -core, but won't work until we have -common stuff removed, too, so try here again
+ # in adduition to -core
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g`/program/ || true
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g` || true
+ # and try to remove /@OOBRANDDIR@ itself
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g` || true
+ ;;
+ purge)
+ rm -f /`echo @OODIR@ | sed -e s,usr/,var/,g`/share/config/javasettingsunopkginstall.xml
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g`/share/config || true
+ rmdir /`echo @OODIR@ | sed -e s,usr/,var/,g`/share || true
+ ;;
+esac
+
+#DEBHELPER#
--- /dev/null
+interest-noawait /@OODIR@/share/extensions
+interest-noawait /@OODIR@
--- /dev/null
+report-with: libreoffice-common libreoffice-java-common fonts-opensymbol
+package-status: libxrender1 libxinerama1 libsane iceweasel firefox icedove iceape-browser libreoffice-filter-binfilter pstoedit imagemagick fglrx-driver nvidia-glx nvidia-glx-legacy
--- /dev/null
+#!/bin/sh
+
+# list all installed extensions. --bundled, --shared and non-shared
+/usr/lib/libreoffice/program/unopkg list --bundled >&3
+/usr/lib/libreoffice/program/unopkg list --shared >&3
+/usr/lib/libreoffice/program/unopkg list >&3
+
+# experimental stuff enabled?
+echo "" >&3
+echo "Experimental features enabled:" >&3
+#_lo_profile_ver=`echo @OOVER@ | cut -d. -f1`
+_lo_profile_ver=4
+if [ -d "$HOME/.config/libreoffice/$_lo_profile_ver" ]; then
+ grep ExperimentalMode $HOME/.config/libreoffice/$_lo_profile_ver/user/registrymodifications.xcu >&3
+fi
+
+# installed VCLplugs
+echo "" >&3
+echo "Installed VCLplugs:" >&3
+dpkg -l libreoffice-gtk2 libreoffice-gtk3 libreoffice-kde5 >&3
--- /dev/null
+libreoffice-core: embedded-library usr/lib/libreoffice/program/libpdfiumlo.so: openjpeg
--- /dev/null
+#!/bin/sh
+
+set -e
+
+#INCLUDE_SHELL_LIB#
+
+if [ "$1" = "remove" ]; then
+ rm -rf /var/spool/libreoffice
+fi
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+usr/share/doc/libreoffice/sdk/docs usr/share/doc/libreoffice-dev-doc/api
--- /dev/null
+libreoffice-dev: wrong-section-according-to-package-name libreoffice-dev => libdevel
--- /dev/null
+report-with: libreoffice-core
--- /dev/null
+libreoffice-draw: desktop-command-not-in-package usr/share/applications/libreoffice-draw.desktop libreoffice
--- /dev/null
+debian/tmp/usr/share/man/man1/lodraw.1.gz
--- /dev/null
+###
+# shared-mime-info
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.graphics; soffice --nologo --draw '%s'; edit=soffice --nologo --draw '%s'; print=soffice --nologo --draw -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument Drawing"; nametemplate=%s.odg; priority=9
+application/vnd.oasis.opendocument.graphics-template; soffice --nologo --draw '%s'; edit=soffice --nologo --draw '%s'; print=soffice --nologo --draw -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument Drawing Template"; nametemplate=%s.otg; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.draw; soffice --nologo --draw '%s'; edit=soffice --nologo --draw '%s'; test=test -n "$DISPLAY"; description="OpenOffice.org Drawing"; nametemplate=%s.sxd; priority=8
+application/vnd.sun.xml.draw.template; soffice --nologo --draw '%s'; edit=soffice --nologo --draw '%s'; test=test -n "$DISPLAY"; description="OpenOffice.org Drawing Template"; nametemplate=%s.std; priority=8
+
+#
+###
--- /dev/null
+report-with: libreoffice-core evolution libreoffice-base
--- /dev/null
+libreoffice-gtk2: binary-or-shlib-defines-rpath
--- /dev/null
+/usr/share/javascript/normalize.css/normalize.css usr/share/libreoffice/help/normalize.css
--- /dev/null
+Document: libreoffice-help-@LCODE@
+Title: LibreOffice Help (@HELPISO@)
+Author: The Document Foundation
+Section: Office
+
+Format: HTML
+Index: /usr/share/libreoffice/help/@HELPISO@/text/shared/main0108.html
--- /dev/null
+# these are in -help-common. See lintian bug http://bugs.debian.org/897244
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/media/*
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/help.html
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/idxcaption.xsl
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/fuse.js
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/help.js
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/hid2file.js
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/paginathing.js
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/idxcontent.xsl
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/index.html
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/normalize.css
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/main_transform.xsl
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/help2.js
+doc-base-file-references-missing-file libreoffice-help-@LCODE@:8 /usr/share/libreoffice/help/default.css
+
--- /dev/null
+report-with: libreoffice-core libreoffice-draw
--- /dev/null
+libreoffice-impress: desktop-command-not-in-package usr/share/applications/libreoffice-impress.desktop libreoffice
--- /dev/null
+debian/tmp/usr/share/man/man1/loimpress.1.gz
--- /dev/null
+###
+# shared-mime-info
+
+# ECMA Office Open XML (Microsoft Office 2007)
+application/vnd.ms-powerpoint.presentation.macroEnabled.12; soffice --nologo --impress '%s'; edit=soffice --nologo --impress '%s'; test=test -n "$DISPLAY"; description="Office Open XML Presentation with Macros Enabled"; nametemplate=%s.pptm; priority=3
+application/vnd.ms-powerpoint.slideshow.macroEnabled.12; soffice --nologo --impress '%s'; edit=soffice --nologo --impress '%s'; test=test -n "$DISPLAY"; description="Office Open XML Presentation Slide Show with Macros Enabled"; nametemplate=%s.ppsm; priority=3
+application/vnd.ms-powerpoint.template.macroEnabled.12; soffice --nologo --impress '%s'; edit=soffice --nologo --impress '%s'; test=test -n "$DISPLAY"; description="Office Open XML Presentation Template with Macros Enabled"; nametemplate=%s.potm; priority=3
+application/vnd.openxmlformats-officedocument.presentationml.presentation; soffice --nologo --impress '%s'; edit=soffice --nologo --impress '%s'; test=test -n "$DISPLAY"; description="Office Open XML Presentation"; nametemplate=%s.pptx; priority=3
+application/vnd.openxmlformats-officedocument.presentationml.slideshow; soffice --nologo --impress '%s'; edit=soffice --nologo --impress '%s'; test=test -n "$DISPLAY"; description="Office Open XML Presentation Slide Show"; nametemplate=%s.ppsx; priority=3
+application/vnd.openxmlformats-officedocument.presentationml.template; soffice --nologo --impress '%s'; edit=soffice --nologo --impress '%s'; test=test -n "$DISPLAY"; description="Office Open XML Presentation Template"; nametemplate=%s.potx; priority=3
+
+# Microsoft PowerPoint
+application/vnd.ms-powerpoint; soffice --nologo --impress '%s'; edit=soffice --nologo --impress '%s'; test=test -n "$DISPLAY"; description="Microsoft PowerPoint Document"; nametemplate=%s.ppt; priority=3
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.presentation; soffice --nologo --impress '%s'; edit=soffice --nologo --impress '%s'; print=soffice --nologo --impress -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument Presentation"; nametemplate=%s.odp; priority=9
+application/vnd.oasis.opendocument.presentation-template; soffice --nologo --impress '%s'; edit=soffice --nologo --impress '%s'; print=soffice --nologo --impress -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument Presentation Template"; nametemplate=%s.otp; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.impress; soffice --nologo --impress '%s'; edit=soffice --nologo --impress '%s'; test=test -n "$DISPLAY"; description="OpenOffice.org Presentation"; nametemplate=%s.sxi; priority=8
+application/vnd.sun.xml.impress.template; soffice --nologo --impress '%s'; edit=soffice --nologo --impress '%s'; test=test -n "$DISPLAY"; description="OpenOffice.org Presentation Template"; nametemplate=%s.sti; priority=8
+
+#
+###
+
--- /dev/null
+# List of POM files for the package
+# Format of this file is:
+# <path to pom file> [option]*
+# where option can be:
+# --ignore: ignore this POM and its artifact if any
+# --ignore-pom: don't install the POM. To use on POM files that are created
+# temporarily for certain artifacts such as Javadoc jars. [mh_install, mh_installpoms]
+# --no-parent: remove the <parent> tag from the POM
+# --package=<package>: an alternative package to use when installing this POM
+# and its artifact
+# --has-package-version: to indicate that the original version of the POM is the same as the upstream part
+# of the version for the package.
+# --keep-elements=<elem1,elem2>: a list of XML elements to keep in the POM
+# during a clean operation with mh_cleanpom or mh_installpom
+# --artifact=<path>: path to the build artifact associated with this POM,
+# it will be installed when using the command mh_install. [mh_install]
+# --java-lib: install the jar into /usr/share/java to comply with Debian
+# packaging guidelines
+# --usj-name=<name>: name to use when installing the library in /usr/share/java
+# --usj-version=<version>: version to use when installing the library in /usr/share/java
+# --no-usj-versionless: don't install the versionless link in /usr/share/java
+# --dest-jar=<path>: the destination for the real jar.
+# It will be installed with mh_install. [mh_install]
+# --classifier=<classifier>: Optional, the classifier for the jar. Empty by default.
+# --site-xml=<location>: Optional, the location for site.xml if it needs to be installed.
+# Empty by default. [mh_install]
+#
+debian/pom.unoil.xml --no-parent --has-package-version
--- /dev/null
+# this is a metapackage, so actually "metapackages" is correct, IMHO
+libreoffice-l10n-in: wrong-section-according-to-package-name libreoffice-l10n-in => localization
--- /dev/null
+# this is a metapackage, so actually "metapackages" is correct, IMHO
+libreoffice-l10n-za: wrong-section-according-to-package-name libreoffice-l10n-za => localization
--- /dev/null
+report-with: libreoffice-core
--- /dev/null
+libreoffice-math: desktop-command-not-in-package usr/share/applications/libreoffice-math.desktop libreoffice
--- /dev/null
+debian/tmp/usr/share/man/man1/lomath.1.gz
--- /dev/null
+###
+# shared-mime-info
+
+# Generic
+text/mathml; soffice --nologo --math '%s'; edit=soffice --nologo --math '%s'; test=test -n "$DISPLAY"; description="MathML Formula"; nametemplate=%s.mml; priority=3
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.formula; soffice --nologo --math '%s'; edit=soffice --nologo --math '%s'; print=soffice --nologo --math -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument Formula"; nametemplate=%s.odf; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.math; soffice --nologo --math '%s'; edit=soffice --nologo --math '%s'; test=test -n "$DISPLAY"; description="OpenOffice.org Formula"; nametemplate=%s.sxm; priority=8
+
+#
+###
--- /dev/null
+#!/bin/sh
+/usr/lib/libreoffice/program/unopkg list --bundled com.sun.star.mysql-connector-ooo-@PLATFORMID@ >&3
--- /dev/null
+libreoffice-nlpsolver: jar-not-in-usr-share usr/lib/libreoffice/share/extensions/nlpsolver/help/*/help.jar
--- /dev/null
+report-with: libreoffice-core
--- /dev/null
+# List of POM files for the package
+# Format of this file is:
+# <path to pom file> [option]*
+# where option can be:
+# --ignore: ignore this POM and its artifact if any
+# --ignore-pom: don't install the POM. To use on POM files that are created
+# temporarily for certain artifacts such as Javadoc jars. [mh_install, mh_installpoms]
+# --no-parent: remove the <parent> tag from the POM
+# --package=<package>: an alternative package to use when installing this POM
+# and its artifact
+# --has-package-version: to indicate that the original version of the POM is the same as the upstream part
+# of the version for the package.
+# --keep-elements=<elem1,elem2>: a list of XML elements to keep in the POM
+# during a clean operation with mh_cleanpom or mh_installpom
+# --artifact=<path>: path to the build artifact associated with this POM,
+# it will be installed when using the command mh_install. [mh_install]
+# --java-lib: install the jar into /usr/share/java to comply with Debian
+# packaging guidelines
+# --usj-name=<name>: name to use when installing the library in /usr/share/java
+# --usj-version=<version>: version to use when installing the library in /usr/share/java
+# --no-usj-versionless: don't install the versionless link in /usr/share/java
+# --dest-jar=<path>: the destination for the real jar.
+# It will be installed with mh_install. [mh_install]
+# --classifier=<classifier>: Optional, the classifier for the jar. Empty by default.
+# --site-xml=<location>: Optional, the location for site.xml if it needs to be installed.
+# Empty by default. [mh_install]
+#
+debian/pom.officebean.xml --no-parent --has-package-version
--- /dev/null
+report-with: libreoffice-impress fglrx-glx ia32-fglrx-glx nvidia-glx nvidia-glx-legacy
--- /dev/null
+report-with: libreoffice-base
--- /dev/null
+report-with: python-uno python3-uno
--- /dev/null
+libreoffice (1:5.3.0~alpha1-1) experimental; urgency=low
+
+ * LibreOffice switched from Firebird 2.5 to Firebird 3. Unfortunately
+ the format used by the Firebird 2.5 code (fdb - the native on-disk format)
+ is NOT compatible with the "new" one (the archive format). LibreOffice 5.3
+ can NOT read older .odbs having .fdb embedded.
+
+ Some future firebird version might have a way to convert itself/make LO
+ able to convert but until then you need to convert manually as follows:
+
+ You need the gbak tool from firebird2.5:
+ https://packages.debian.org/search?searchon=contents&keywords=gbak&mode=exactfilename&suite=oldstable&arch=any
+
+ Then execute:
+ unzip -d oldFirebird.odb temp;
+ gbak -b temp/database/firebird.fdb temp/database/firebird.fbk;
+ rm temp/database/firebird.fdb
+ zip -FSr oldFirebird.odb temp;
+ rm -r temp;
+
+ -- Rene Engelhard <rene@debian.org> Mon, 28 Nov 2016 10:27:15 +0200
--- /dev/null
+dir_to_symlink /usr/share/doc/libreoffice-sdbc-firebird /usr/share/doc/libreoffice-core 1:5.4.3~rc1-3~
--- /dev/null
+#!/bin/sh
+/usr/lib/libreoffice/program/unopkg list --bundled com.sun.wiki-publisher >&3
--- /dev/null
+libreoffice-wiki-publisher: jar-not-in-usr-share usr/lib/libreoffice/share/extensions/wiki-publisher/help/*/help.jar
--- /dev/null
+report-with: libreoffice-core
--- /dev/null
+libreoffice-writer: desktop-command-not-in-package usr/share/applications/libreoffice-writer.desktop libreoffice
--- /dev/null
+debian/tmp/usr/share/man/man1/loweb.1.gz
+debian/tmp/usr/share/man/man1/lowriter.1.gz
+
--- /dev/null
+###
+# shared-mime-info
+
+# Generic
+application/rtf; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; test=test -n "$DISPLAY"; description="Rich Text Format"; nametemplate=%s.rtf; priority=3
+application/x-extension-txt; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; test=test -n "$DISPLAY"; description="Plain Text Document"; nametemplate=%s.txt; priority=3
+application/x-t602; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; test=test -n "$DISPLAY"; description="T602 Document"; nametemplate=%s.602; priority=3
+
+# Corel WordPerfect
+application/vnd.wordperfect; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; test=test -n "$DISPLAY"; description="WordPerfect Document"; nametemplate=%s.wp; priority=3
+
+# ECMA Office Open XML (Microsoft Office 2007)
+application/vnd.ms-word.document.macroEnabled.12; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; test=test -n "$DISPLAY"; description="Office Open XML Document with Macros Enabled"; nametemplate=%s.docm; priority=3
+application/vnd.ms-word.template.macroEnabled.12; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; test=test -n "$DISPLAY"; description="Office Open XML Document Template with Macros Enabled"; nametemplate=%s.dotm; priority=3
+application/vnd.openxmlformats-officedocument.wordprocessingml.document; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; test=test -n "$DISPLAY"; description="Office Open XML Document"; nametemplate=%s.docx; priority=3
+application/vnd.openxmlformats-officedocument.wordprocessingml.template; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; test=test -n "$DISPLAY"; description="Office Open XML Document Template"; nametemplate=%s.dotx; priority=3
+
+# Microsoft Word
+application/msword; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; test=test -n "$DISPLAY"; description="Microsoft Word Document"; nametemplate=%s.doc; priority=3
+
+# Microsoft Works
+application/vnd.ms-works; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; test=test -n "$DISPLAY"; description="Microsoft Works Document"; nametemplate=%s.wps; priority=3
+
+# OASIS OpenDocument Format
+application/vnd.oasis.opendocument.text; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; print=soffice --nologo --writer -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument Text Document"; nametemplate=%s.odt; priority=9
+application/vnd.oasis.opendocument.text-master; soffice --nologo --global '%s'; edit=soffice --nologo --writer '%s'; print=soffice --nologo --writer -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument Master Document"; nametemplate=%s.odm; priority=9
+application/vnd.oasis.opendocument.text-template; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; print=soffice --nologo --writer -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument Text Document Template"; nametemplate=%s.ott; priority=9
+application/vnd.oasis.opendocument.text-web; soffice --nologo --web '%s'; edit=soffice --nologo --web '%s'; print=soffice --nologo --web -p '%s'; test=test -n "$DISPLAY"; description="OpenDocument HTML Document Template"; nametemplate=%s.oth; priority=9
+
+# OpenOffice.org 1.0
+application/vnd.sun.xml.writer; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; description="OpenOffice.org Text Document"; nametemplate=%s.sxw; priority=8
+application/vnd.sun.xml.writer.global; soffice --nologo --global '%s'; edit=soffice --nologo --writer '%s'; description="OpenOffice.org Master Document"; nametemplate=%s.sxg; priority=8
+application/vnd.sun.xml.writer.template; soffice --nologo --writer '%s'; edit=soffice --nologo --writer '%s'; description="OpenOffice.org Text Document Template"; nametemplate=%s.stw; priority=8
+
+#
+###
+
--- /dev/null
+report-with: libreoffice-core libreoffice-writer libreoffice-calc libreoffice-base libreoffice-draw libreoffice-impress libreoffice-math
+
--- /dev/null
+libreofficekit/README
--- /dev/null
+Document: lo-cpp-ref
+Title: LibreOffice @lo_sources_ver@ SDK C/C++ API Reference
+Author: The Document Foundation
+Section: Programming
+
+Format: HTML
+Index: /usr/share/doc/libreoffice/sdk/docs/cpp/ref/index.html
--- /dev/null
+Document: lo-idl-ref
+Title: LibreOffice @lo_sources_ver@ SDK API Reference
+Author: The Document Foundation
+Section: Programming
+
+Format: HTML
+Index: /usr/share/doc/libreoffice/sdk/docs/idl/ref/index.html
--- /dev/null
+Document: lo-java-ref
+Title: LibreOffice SDK @lo_sources_ver@ Java API Reference
+Author: The Document Foundation
+Section: Programming/Java
+
+Format: HTML
+Index: /usr/share/doc/libreoffice/sdk/docs/java/ref/index.html
--- /dev/null
+From 52f7aa318722bd17c77ee5c4fa8307936e7b53af Mon Sep 17 00:00:00 2001
+From: Stephan Bergmann <sbergman@redhat.com>
+Date: Mon, 19 Aug 2019 11:27:15 +0200
+Subject: Improve check for absolute URI
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Change-Id: I4dee44832107f72f8f3fb68554428dc1e646c346
+Reviewed-on: https://gerrit.libreoffice.org/77706
+Tested-by: Jenkins
+Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
+(cherry picked from commit c79efeb66f7951305d0334bc288aee1c571a8728)
+Reviewed-on: https://gerrit.libreoffice.org/77724
+Reviewed-by: Caolán McNamara <caolanm@redhat.com>
+Tested-by: Caolán McNamara <caolanm@redhat.com>
+---
+ scripting/source/pyprov/pythonscript.py | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/scripting/source/pyprov/pythonscript.py b/scripting/source/pyprov/pythonscript.py
+index d8924f8..acb6184 100644
+--- a/scripting/source/pyprov/pythonscript.py
++++ b/scripting/source/pyprov/pythonscript.py
+@@ -237,7 +237,7 @@ class MyUriHelper:
+ log.debug( message )
+ raise RuntimeException( message )
+
+- if xFileUri.isAbsolute():
++ if not xFileUri.hasRelativePath():
+ message = "pythonscript: an absolute uri is invalid '" + sFileUri+ "'"
+ log.debug( message )
+ raise RuntimeException( message )
+--
+cgit v1.1
+
--- /dev/null
+From ffad51e9e625a22f1efab3da7886baf4134b444f Mon Sep 17 00:00:00 2001
+From: Stephan Bergmann <sbergman@redhat.com>
+Date: Mon, 26 Aug 2019 10:18:09 +0200
+Subject: Improve check
+
+Change-Id: I8280a81eef2ced0ff0ace51ea9f094421abafe13
+Reviewed-on: https://gerrit.libreoffice.org/78108
+Tested-by: Jenkins
+Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
+(cherry picked from commit 761e6dd25782420bf06e4a2ff3205a79b6cbb136)
+Reviewed-on: https://gerrit.libreoffice.org/78129
+Reviewed-by: Michael Stahl <Michael.Stahl@cib.de>
+---
+ sfx2/source/doc/objmisc.cxx | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/sfx2/source/doc/objmisc.cxx b/sfx2/source/doc/objmisc.cxx
+index 08f4d8c..dd01995 100644
+--- a/sfx2/source/doc/objmisc.cxx
++++ b/sfx2/source/doc/objmisc.cxx
+@@ -1364,7 +1364,7 @@ bool SfxObjectShell::UnTrustedScript(const OUString& rScriptURL)
+ do
+ {
+ OUString aToken = sScript.getToken(0, '/', nIndex);
+- if (aToken.startsWithIgnoreAsciiCase("LibreLogo"))
++ if (aToken.startsWithIgnoreAsciiCase("LibreLogo") || aToken.indexOf('~') != -1)
+ {
+ return true;
+ }
+--
+cgit v1.1
+
--- /dev/null
+From 87c418a98650ab6e4a62a0b4b72e02fee358dced Mon Sep 17 00:00:00 2001
+From: Stephan Bergmann <sbergman@redhat.com>
+Date: Fri, 7 Jun 2019 09:28:12 +0200
+Subject: More uses of referer URL with SvxBrushItem
+
+Reviewed-on: https://gerrit.libreoffice.org/73643
+Tested-by: Jenkins
+Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
+(cherry picked from commit b518882de8213ef71a8003f95fbdf7689069c06d)
+Conflicts:
+ sw/source/core/text/porfld.cxx
+ sw/source/core/unocore/unosett.cxx
+
+Change-Id: I04b524784df4ef453d8b1feec13b62f183a17e23
+Reviewed-on: https://gerrit.libreoffice.org/73860
+Tested-by: Jenkins
+Reviewed-by: Miklos Vajna <vmiklos@collabora.com>
+---
+ sw/inc/unosett.hxx | 2 +-
+ sw/source/core/text/porfld.cxx | 4 ++--
+ sw/source/core/text/porfld.hxx | 1 +
+ sw/source/core/text/txtfld.cxx | 12 +++++++++++-
+ sw/source/core/unocore/unosett.cxx | 15 ++++++++++++---
+ sw/source/uibase/config/StoredChapterNumbering.cxx | 2 +-
+ 6 files changed, 28 insertions(+), 8 deletions(-)
+
+diff --git a/sw/inc/unosett.hxx b/sw/inc/unosett.hxx
+index a6d49603..4d83c77 100644
+--- a/sw/inc/unosett.hxx
++++ b/sw/inc/unosett.hxx
+@@ -209,7 +209,7 @@ public:
+
+ static css::uno::Sequence<css::beans::PropertyValue> GetPropertiesForNumFormat(
+ const SwNumFormat& rFormat, OUString const& rCharFormatName,
+- OUString const* pHeadingStyleName);
++ OUString const* pHeadingStyleName, OUString const & referer);
+ static void SetPropertiesToNumFormat(
+ SwNumFormat & aFormat,
+ OUString & rCharStyleName,
+diff --git a/sw/source/core/text/porfld.cxx b/sw/source/core/text/porfld.cxx
+index be4bf77..bb563e6 100644
+--- a/sw/source/core/text/porfld.cxx
++++ b/sw/source/core/text/porfld.cxx
+@@ -751,7 +751,7 @@ SwBulletPortion::SwBulletPortion( const sal_Unicode cBullet,
+
+ SwGrfNumPortion::SwGrfNumPortion(
+ const OUString& rGraphicFollowedBy,
+- const SvxBrushItem* pGrfBrush,
++ const SvxBrushItem* pGrfBrush, OUString const & referer,
+ const SwFormatVertOrient* pGrfOrient, const Size& rGrfSize,
+ const bool bLft, const bool bCntr, const sal_uInt16 nMinDst,
+ const bool bLabelAlignmentPosAndSpaceModeActive ) :
+@@ -765,7 +765,7 @@ SwGrfNumPortion::SwGrfNumPortion(
+ if( pGrfBrush )
+ {
+ *pBrush = *pGrfBrush;
+- const Graphic* pGraph = pGrfBrush->GetGraphic();
++ const Graphic* pGraph = pGrfBrush->GetGraphic(referer);
+ if( pGraph )
+ SetAnimated( pGraph->IsAnimated() );
+ else
+diff --git a/sw/source/core/text/porfld.hxx b/sw/source/core/text/porfld.hxx
+index 1514041..1490d93 100644
+--- a/sw/source/core/text/porfld.hxx
++++ b/sw/source/core/text/porfld.hxx
+@@ -162,6 +162,7 @@ class SwGrfNumPortion : public SwNumberPortion
+ public:
+ SwGrfNumPortion( const OUString& rGraphicFollowedBy,
+ const SvxBrushItem* pGrfBrush,
++ OUString const & referer,
+ const SwFormatVertOrient* pGrfOrient,
+ const Size& rGrfSize,
+ const bool bLeft,
+diff --git a/sw/source/core/text/txtfld.cxx b/sw/source/core/text/txtfld.cxx
+index 9138a35e..1bed580 100644
+--- a/sw/source/core/text/txtfld.cxx
++++ b/sw/source/core/text/txtfld.cxx
+@@ -52,6 +52,7 @@
+ #include <flddat.hxx>
+ #include <fmtautofmt.hxx>
+ #include <IDocumentSettingAccess.hxx>
++#include <sfx2/docfile.hxx>
+ #include <svl/itemiter.hxx>
+
+ static bool lcl_IsInBody( SwFrame const *pFrame )
+@@ -505,8 +506,17 @@ SwNumberPortion *SwTextFormatter::NewNumberPortion( SwTextFormatInfo &rInf ) con
+
+ if( SVX_NUM_BITMAP == rNumFormat.GetNumberingType() )
+ {
++ OUString referer;
++ if (auto const sh1 = rInf.GetVsh()) {
++ if (auto const doc = sh1->GetDoc()) {
++ auto const sh2 = doc->GetPersist();
++ if (sh2 != nullptr && sh2->HasName()) {
++ referer = sh2->GetMedium()->GetName();
++ }
++ }
++ }
+ pRet = new SwGrfNumPortion( pTextNd->GetLabelFollowedBy(),
+- rNumFormat.GetBrush(),
++ rNumFormat.GetBrush(), referer,
+ rNumFormat.GetGraphicOrientation(),
+ rNumFormat.GetGraphicSize(),
+ bLeft, bCenter, nMinDist,
+diff --git a/sw/source/core/unocore/unosett.cxx b/sw/source/core/unocore/unosett.cxx
+index 3a72361..02ae09e 100644
+--- a/sw/source/core/unocore/unosett.cxx
++++ b/sw/source/core/unocore/unosett.cxx
+@@ -60,6 +60,7 @@
+ #include <vcl/metric.hxx>
+ #include <vcl/graph.hxx>
+ #include <vcl/GraphicLoader.hxx>
++#include <sfx2/docfile.hxx>
+ #include <svtools/ctrltool.hxx>
+ #include <vcl/svapp.hxx>
+ #include <editeng/unofdesc.hxx>
+@@ -1301,13 +1302,21 @@ uno::Sequence<beans::PropertyValue> SwXNumberingRules::GetNumberingRuleByIndex(
+ SwStyleNameMapper::FillProgName(sValue, aUString, SwGetPoolIdFromName::TxtColl);
+ }
+
+- return GetPropertiesForNumFormat(rFormat, CharStyleName, (pDocShell) ? & aUString : nullptr);
++ OUString referer;
++ if (pDoc != nullptr) {
++ auto const sh = pDoc->GetPersist();
++ if (sh != nullptr && sh->HasName()) {
++ referer = sh->GetMedium()->GetName();
++ }
++ }
++ return GetPropertiesForNumFormat(
++ rFormat, CharStyleName, (pDocShell) ? & aUString : nullptr, referer);
+
+ }
+
+ uno::Sequence<beans::PropertyValue> SwXNumberingRules::GetPropertiesForNumFormat(
+ const SwNumFormat& rFormat, OUString const& rCharFormatName,
+- OUString const*const pHeadingStyleName)
++ OUString const*const pHeadingStyleName, OUString const & referer)
+ {
+ bool bChapterNum = pHeadingStyleName != nullptr;
+
+@@ -1429,7 +1438,7 @@ uno::Sequence<beans::PropertyValue> SwXNumberingRules::GetPropertiesForNumFormat
+ if (SVX_NUM_BITMAP == rFormat.GetNumberingType())
+ {
+ const SvxBrushItem* pBrush = rFormat.GetBrush();
+- const Graphic* pGraphic = pBrush ? pBrush->GetGraphic() : nullptr;
++ const Graphic* pGraphic = pBrush ? pBrush->GetGraphic(referer) : nullptr;
+ if (pGraphic)
+ {
+ //GraphicBitmap
+diff --git a/sw/source/uibase/config/StoredChapterNumbering.cxx b/sw/source/uibase/config/StoredChapterNumbering.cxx
+index 940ffb3..7be6460 100644
+--- a/sw/source/uibase/config/StoredChapterNumbering.cxx
++++ b/sw/source/uibase/config/StoredChapterNumbering.cxx
+@@ -130,7 +130,7 @@ public:
+ OUString dummy; // pass in empty HeadingStyleName - can't import anyway
+ uno::Sequence<beans::PropertyValue> const ret(
+ SwXNumberingRules::GetPropertiesForNumFormat(
+- *pNumFormat, *pCharStyleName, &dummy));
++ *pNumFormat, *pCharStyleName, &dummy, ""));
+ return uno::makeAny(ret);
+ }
+
+--
+cgit v1.1
+
--- /dev/null
+From 0872f7dc87445f81afd56b5a096d026df75d3a05 Mon Sep 17 00:00:00 2001
+From: Julien Nabet <serval2412@yahoo.fr>
+Date: Sun, 13 Oct 2019 00:26:10 +0200
+Subject: tdf#128111: "adsrc" doesn't exist from Postgresql 12
+
+Before Postgresql 8.0, there was only "adsrc"
+then it's been deprecated
+"The adsrc field is historical, and is best not used, because it does not track outside changes
+ that might affect the representation of the default value.
+ Reverse-compiling the adbin field (with pg_get_expr for example) is a better way to display the default value
+"
+and finally it's been removed with version 12
+
+See evolution with:
+- https://www.postgresql.org/docs/8/catalog-pg-attrdef.html
+- https://www.postgresql.org/docs/11/catalog-pg-attrdef.html
+- https://www.postgresql.org/docs/12/catalog-pg-attrdef.html
+
+Merge with https://cgit.freedesktop.org/libreoffice/core/commit/?id=1ec93ef100bb5f6ccef91f12e28ed09feb3eb38b
+
+Change-Id: I57e9da423a23b5a96bbb64b0e026b160e9643ab9
+Reviewed-on: https://gerrit.libreoffice.org/80722
+(cherry picked from commit 0c46c81e04530e8f6ce4f34195d8f0443ed8bfc3)
+Reviewed-on: https://gerrit.libreoffice.org/80736
+Tested-by: Jenkins
+Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
+---
+ connectivity/source/drivers/postgresql/pq_databasemetadata.cxx | 6 +++---
+ connectivity/source/drivers/postgresql/pq_statement.cxx | 10 ++++++----
+ connectivity/source/drivers/postgresql/pq_tools.cxx | 7 +++++++
+ connectivity/source/drivers/postgresql/pq_tools.hxx | 2 ++
+ 4 files changed, 18 insertions(+), 7 deletions(-)
+
+diff --git a/connectivity/source/drivers/postgresql/pq_databasemetadata.cxx b/connectivity/source/drivers/postgresql/pq_databasemetadata.cxx
+index 10c8546..8af02f9 100644
+--- a/connectivity/source/drivers/postgresql/pq_databasemetadata.cxx
++++ b/connectivity/source/drivers/postgresql/pq_databasemetadata.cxx
+@@ -1514,7 +1514,7 @@ css::uno::Reference< XResultSet > DatabaseMetaData::getColumns(
+ // allow NULL values. An empty string means
+ // nobody knows.
+ // => pg_attribute.attnotnull
+-
++ OUString strDefaultValue = getColExprForDefaultSettingVal(m_pSettings);
+ Reference< XPreparedStatement > statement = m_origin->prepareStatement(
+ "SELECT pg_namespace.nspname, " // 1
+ "pg_class.relname, " // 2
+@@ -1524,8 +1524,8 @@ css::uno::Reference< XResultSet > DatabaseMetaData::getColumns(
+ "pg_attribute.attnotnull, " // 6
+ "pg_type.typdefault, " // 7
+ "pg_type.typtype, " // 8
+- "pg_attrdef.adsrc, " // 9
+- "pg_description.description, " // 10
++ + strDefaultValue + // 9
++ ",pg_description.description, " // 10
+ "pg_type.typbasetype, " // 11
+ "pg_attribute.attnum " // 12
+ "FROM pg_class, "
+diff --git a/connectivity/source/drivers/postgresql/pq_statement.cxx b/connectivity/source/drivers/postgresql/pq_statement.cxx
+index 7796cac..79930e2 100644
+--- a/connectivity/source/drivers/postgresql/pq_statement.cxx
++++ b/connectivity/source/drivers/postgresql/pq_statement.cxx
+@@ -631,10 +631,12 @@ static void getAutoValues(
+ String2StringMap & result,
+ const Reference< XConnection > & connection,
+ const OUString &schemaName,
+- const OUString & tableName )
++ const OUString & tableName,
++ ConnectionSettings *pConnectionSettings )
+ {
++ OUString strDefaultValue = getColExprForDefaultSettingVal(pConnectionSettings);
+ Reference< XPreparedStatement > stmt = connection->prepareStatement(
+- "SELECT pg_attribute.attname, pg_attrdef.adsrc "
++ "SELECT pg_attribute.attname, " + strDefaultValue +
+ "FROM pg_class, pg_namespace, pg_attribute "
+ "LEFT JOIN pg_attrdef ON pg_attribute.attrelid = pg_attrdef.adrelid AND "
+ "pg_attribute.attnum = pg_attrdef.adnum "
+@@ -644,7 +646,7 @@ static void getAutoValues(
+ // LEM TODO: this is weird; why "LIKE" and not "="?
+ // Most probably gives problems if tableName contains '%'
+ "pg_class.relname LIKE ? AND "
+- "pg_attrdef.adsrc != ''"
++ + strDefaultValue + " != ''"
+ );
+ DisposeGuard guard( stmt );
+ Reference< XParameters > paras( stmt, UNO_QUERY );
+@@ -738,7 +740,7 @@ Reference< XResultSet > getGeneratedValuesFromLastInsert(
+ {
+ if( autoValues.begin() == autoValues.end() )
+ {
+- getAutoValues( autoValues, connection, schemaName, tableName );
++ getAutoValues( autoValues, connection, schemaName, tableName, pConnectionSettings );
+ }
+ // this could mean, that the column is a default or auto value, check this ...
+ bool bColumnMatchAutoValue = false;
+diff --git a/connectivity/source/drivers/postgresql/pq_tools.cxx b/connectivity/source/drivers/postgresql/pq_tools.cxx
+index fd691f2..63ed515 100644
+--- a/connectivity/source/drivers/postgresql/pq_tools.cxx
++++ b/connectivity/source/drivers/postgresql/pq_tools.cxx
+@@ -836,6 +836,13 @@ OString extractSingleTableFromSelect( const std::vector< OString > &vec )
+
+ }
+
++OUString getColExprForDefaultSettingVal(ConnectionSettings const *settings)
++{
++ return (PQserverVersion( settings->pConnection ) < 80000)?
++ OUString("pg_attrdef.adsrc"):
++ OUString("pg_get_expr(pg_attrdef.adbin, pg_attrdef.adrelid, true)");
++}
++
+ css::uno::Sequence< sal_Int32 > string2intarray( const OUString & str )
+ {
+ css::uno::Sequence< sal_Int32 > ret;
+diff --git a/connectivity/source/drivers/postgresql/pq_tools.hxx b/connectivity/source/drivers/postgresql/pq_tools.hxx
+index 9d4e234..af751f8 100644
+--- a/connectivity/source/drivers/postgresql/pq_tools.hxx
++++ b/connectivity/source/drivers/postgresql/pq_tools.hxx
+@@ -100,6 +100,8 @@ void disposeObject( const css::uno::Reference< css::uno::XInterface > & r );
+ OUString extractTableFromInsert( const OUString & sql );
+ OString extractSingleTableFromSelect( const std::vector< OString > &vec );
+
++OUString getColExprForDefaultSettingVal(ConnectionSettings const *settings);
++
+ void tokenizeSQL( const OString & sql, std::vector< OString > &vec );
+ void splitSQL( const OString & sql, std::vector< OString > &vec );
+ std::vector< sal_Int32 > parseIntArray( const OUString & str );
+--
+cgit v1.1
+
--- /dev/null
+From 1256f4f1ad0e6038055c0a5856c79b9e61c3f802 Mon Sep 17 00:00:00 2001
+From: Stephan Bergmann <sbergman@redhat.com>
+Date: Tue, 6 Aug 2019 13:29:22 +0200
+Subject: Properly obtain location
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Change-Id: I9fb0d883a3623394343cd54ef61e5610544198c8
+Reviewed-on: https://gerrit.libreoffice.org/77019
+Tested-by: Jenkins
+Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
+(cherry picked from commit a9cde2557242a0c343d99533f3ee032599c66f42)
+Reviewed-on: https://gerrit.libreoffice.org/77022
+Reviewed-by: Caolán McNamara <caolanm@redhat.com>
+Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
+Tested-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
+---
+ scripting/source/protocolhandler/scripthandler.cxx | 9 +++++++--
+ sfx2/source/doc/objmisc.cxx | 21 ++++++++++++---------
+ 2 files changed, 19 insertions(+), 11 deletions(-)
+
+diff --git a/scripting/source/protocolhandler/scripthandler.cxx b/scripting/source/protocolhandler/scripthandler.cxx
+index 07c4353..3340ff4 100644
+--- a/scripting/source/protocolhandler/scripthandler.cxx
++++ b/scripting/source/protocolhandler/scripthandler.cxx
+@@ -49,6 +49,7 @@
+
+ #include <com/sun/star/uno/XComponentContext.hpp>
+ #include <com/sun/star/uri/XUriReference.hpp>
++#include <com/sun/star/uri/XVndSunStarScriptUrlReference.hpp>
+ #include <com/sun/star/uri/UriReferenceFactory.hpp>
+
+ #include <memory>
+@@ -135,8 +136,12 @@ void SAL_CALL ScriptProtocolHandler::dispatchWithNotification(
+ {
+ try
+ {
+- bool bIsDocumentScript = ( aURL.Complete.indexOf( "document" ) !=-1 );
+- // TODO: isn't this somewhat strange? This should be a test for a location=document parameter, shouldn't it?
++ css::uno::Reference<css::uri::XUriReferenceFactory> urifac(
++ css::uri::UriReferenceFactory::create(m_xContext));
++ css::uno::Reference<css::uri::XVndSunStarScriptUrlReference> uri(
++ urifac->parse(aURL.Complete), css::uno::UNO_QUERY_THROW);
++ auto const loc = uri->getParameter("location");
++ bool bIsDocumentScript = loc == "document";
+
+ if ( bIsDocumentScript )
+ {
+diff --git a/sfx2/source/doc/objmisc.cxx b/sfx2/source/doc/objmisc.cxx
+index 8a6ff1b..e999557 100644
+--- a/sfx2/source/doc/objmisc.cxx
++++ b/sfx2/source/doc/objmisc.cxx
+@@ -1383,19 +1383,22 @@ ErrCode SfxObjectShell::CallXScript( const Reference< XInterface >& _rxScriptCon
+ SAL_INFO("sfx", "in CallXScript" );
+ ErrCode nErr = ERRCODE_NONE;
+
+- bool bIsDocumentScript = ( _rScriptURL.indexOf( "location=document" ) >= 0 );
+- // TODO: we should parse the URL, and check whether there is a parameter with this name.
+- // Otherwise, we might find too much.
+- if ( bIsDocumentScript && !lcl_isScriptAccessAllowed_nothrow( _rxScriptContext ) )
+- return ERRCODE_IO_ACCESSDENIED;
+-
+- if ( UnTrustedScript(_rScriptURL) )
+- return ERRCODE_IO_ACCESSDENIED;
+-
+ bool bCaughtException = false;
+ Any aException;
+ try
+ {
++ css::uno::Reference<css::uri::XUriReferenceFactory> urifac(
++ css::uri::UriReferenceFactory::create(comphelper::getProcessComponentContext()));
++ css::uno::Reference<css::uri::XVndSunStarScriptUrlReference> uri(
++ urifac->parse(_rScriptURL), css::uno::UNO_QUERY_THROW);
++ auto const loc = uri->getParameter("location");
++ bool bIsDocumentScript = loc == "document";
++ if ( bIsDocumentScript && !lcl_isScriptAccessAllowed_nothrow( _rxScriptContext ) )
++ return ERRCODE_IO_ACCESSDENIED;
++
++ if ( UnTrustedScript(_rScriptURL) )
++ return ERRCODE_IO_ACCESSDENIED;
++
+ // obtain/create a script provider
+ Reference< provider::XScriptProvider > xScriptProvider;
+ Reference< provider::XScriptProviderSupplier > xSPS( _rxScriptContext, UNO_QUERY );
+--
+cgit v1.1
+
--- /dev/null
+From 3d59261bfa6f02a36b20cd117ed25422c59fbe4f Mon Sep 17 00:00:00 2001
+From: Eike Rathke <erack@redhat.com>
+Date: Fri, 16 Aug 2019 15:36:15 +0200
+Subject: Resolves: tdf#126928 allow link updates in an intermediate linked
+ document
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+... if link updates are allowed in the current document and that
+intermediate document resides in a trusted location.
+
+This works with both, the "Always (from trusted locations)" and
+the "On request" settings under Tools -> Options -> Calc ->
+General. It can't work with documents residing in a non-trusted
+location as there is no way to allow updates on demand for a such
+loaded document (hidden via formulas).
+
+Reviewed-on: https://gerrit.libreoffice.org/77588
+Reviewed-by: Eike Rathke <erack@redhat.com>
+Tested-by: Jenkins
+(cherry picked from commit 54bf84746a2a9a2e2aaf0df9e429b0cfd538f640)
+
+ Conflicts:
+ sc/source/ui/docshell/docsh4.cxx
+ sc/source/ui/docshell/externalrefmgr.cxx
+
+Backported. Also includes
+
+ commit 1663b1e8233db6c6d1c2b35639ad984961084009
+ CommitDate: Tue Feb 26 21:15:57 2019 +0100
+
+ tdf#120736: For Calc shared documents also check the original document URL
+
+Change-Id: Ie483f7743db7c6d5cf947dc16a9c3660855f3423
+Reviewed-on: https://gerrit.libreoffice.org/77613
+Tested-by: Jenkins
+Reviewed-by: Caolán McNamara <caolanm@redhat.com>
+Tested-by: Caolán McNamara <caolanm@redhat.com>
+---
+ sc/source/ui/docshell/docsh.cxx | 13 +++++--
+ sc/source/ui/docshell/docsh4.cxx | 64 ++++++++++++++++++--------------
+ sc/source/ui/docshell/externalrefmgr.cxx | 1 +
+ sc/source/ui/inc/docsh.hxx | 2 +
+ 4 files changed, 49 insertions(+), 31 deletions(-)
+
+diff --git a/sc/source/ui/docshell/docsh.cxx b/sc/source/ui/docshell/docsh.cxx
+index 59fe24a..3d20d85 100644
+--- a/sc/source/ui/docshell/docsh.cxx
++++ b/sc/source/ui/docshell/docsh.cxx
+@@ -601,15 +601,22 @@ bool ScDocShell::Load( SfxMedium& rMedium )
+ bool bRet = SfxObjectShell::Load(rMedium);
+ if (bRet)
+ {
+- comphelper::EmbeddedObjectContainer& rEmbeddedObjectContainer = getEmbeddedObjectContainer();
+- rEmbeddedObjectContainer.setUserAllowsLinkUpdate(false);
+-
+ if (GetMedium())
+ {
+ const SfxUInt16Item* pUpdateDocItem = SfxItemSet::GetItem<SfxUInt16Item>(rMedium.GetItemSet(), SID_UPDATEDOCMODE, false);
+ m_nCanUpdate = pUpdateDocItem ? pUpdateDocItem->GetValue() : css::document::UpdateDocMode::NO_UPDATE;
+ }
+
++ // GetLinkUpdateModeState() evaluates m_nCanUpdate so that must have
++ // been set first. Do not override an already forbidden LinkUpdate (the
++ // default is allow).
++ comphelper::EmbeddedObjectContainer& rEmbeddedObjectContainer = getEmbeddedObjectContainer();
++ if (rEmbeddedObjectContainer.getUserAllowsLinkUpdate())
++ {
++ // For anything else than LM_ALWAYS we need user confirmation.
++ rEmbeddedObjectContainer.setUserAllowsLinkUpdate( GetLinkUpdateModeState() == LM_ALWAYS);
++ }
++
+ {
+ // prepare a valid document for XML filter
+ // (for ConvertFrom, InitNew is called before)
+diff --git a/sc/source/ui/docshell/docsh4.cxx b/sc/source/ui/docshell/docsh4.cxx
+index e021414..ac2ebfb 100644
+--- a/sc/source/ui/docshell/docsh4.cxx
++++ b/sc/source/ui/docshell/docsh4.cxx
+@@ -154,6 +154,41 @@ IMPL_LINK_NOARG( ScDocShell, ReloadAllLinksHdl, Button*, void )
+ SAL_WARN_IF(!pViewFrame, "sc", "expected there to be a ViewFrame");
+ }
+
++ScLkUpdMode ScDocShell::GetLinkUpdateModeState() const
++{
++ const ScDocument& rDoc = GetDocument();
++
++ ScLkUpdMode nSet = rDoc.GetLinkMode();
++
++ if (nSet == LM_UNKNOWN)
++ {
++ ScAppOptions aAppOptions = SC_MOD()->GetAppOptions();
++ nSet = aAppOptions.GetLinkMode();
++ }
++
++ if (m_nCanUpdate == css::document::UpdateDocMode::NO_UPDATE)
++ nSet = LM_NEVER;
++ else if (m_nCanUpdate == css::document::UpdateDocMode::FULL_UPDATE)
++ nSet = LM_ALWAYS;
++
++ if (nSet == LM_ALWAYS
++ && !(SvtSecurityOptions().isTrustedLocationUriForUpdatingLinks(
++ GetMedium() == nullptr ? OUString() : GetMedium()->GetName())
++ || (IsDocShared()
++ && SvtSecurityOptions().isTrustedLocationUriForUpdatingLinks(
++ GetSharedFileURL()))))
++ {
++ nSet = LM_ON_DEMAND;
++ }
++ if (m_nCanUpdate == css::document::UpdateDocMode::QUIET_UPDATE
++ && nSet == LM_ON_DEMAND)
++ {
++ nSet = LM_NEVER;
++ }
++
++ return nSet;
++}
++
+ void ScDocShell::Execute( SfxRequest& rReq )
+ {
+ const SfxItemSet* pReqArgs = rReq.GetArgs();
+@@ -451,34 +486,7 @@ void ScDocShell::Execute( SfxRequest& rReq )
+ break;
+ case SID_UPDATETABLINKS:
+ {
+- ScDocument& rDoc = GetDocument();
+-
+- ScLkUpdMode nSet = rDoc.GetLinkMode();
+-
+- if(nSet==LM_UNKNOWN)
+- {
+- ScAppOptions aAppOptions=SC_MOD()->GetAppOptions();
+- nSet=aAppOptions.GetLinkMode();
+- }
+-
+- if (m_nCanUpdate == css::document::UpdateDocMode::NO_UPDATE)
+- nSet = LM_NEVER;
+- else if (m_nCanUpdate == css::document::UpdateDocMode::FULL_UPDATE)
+- nSet = LM_ALWAYS;
+-
+- if (nSet == LM_ALWAYS
+- && !(SvtSecurityOptions()
+- .isTrustedLocationUriForUpdatingLinks(
+- GetMedium() == nullptr
+- ? OUString() : GetMedium()->GetName())))
+- {
+- nSet = LM_ON_DEMAND;
+- }
+- if (m_nCanUpdate == css::document::UpdateDocMode::QUIET_UPDATE
+- && nSet == LM_ON_DEMAND)
+- {
+- nSet = LM_NEVER;
+- }
++ ScLkUpdMode nSet = GetLinkUpdateModeState();
+
+ if (nSet == LM_ALWAYS)
+ {
+diff --git a/sc/source/ui/docshell/externalrefmgr.cxx b/sc/source/ui/docshell/externalrefmgr.cxx
+index 14b8363..940717d 100644
+--- a/sc/source/ui/docshell/externalrefmgr.cxx
++++ b/sc/source/ui/docshell/externalrefmgr.cxx
+@@ -62,6 +62,7 @@
+ #include <columnspanset.hxx>
+ #include <column.hxx>
+ #include <com/sun/star/document/MacroExecMode.hpp>
++#include <com/sun/star/document/UpdateDocMode.hpp>
+
+ #include <memory>
+ #include <algorithm>
+diff --git a/sc/source/ui/inc/docsh.hxx b/sc/source/ui/inc/docsh.hxx
+index 90b6840..be21efa 100644
+--- a/sc/source/ui/inc/docsh.hxx
++++ b/sc/source/ui/inc/docsh.hxx
+@@ -217,6 +217,7 @@ public:
+
+ void GetDocStat( ScDocStat& rDocStat );
+
++ const ScDocument& GetDocument() const { return m_aDocument; }
+ ScDocument& GetDocument() { return m_aDocument; }
+ ScDocFunc& GetDocFunc() { return *m_pDocFunc; }
+
+@@ -299,6 +300,7 @@ public:
+ void UpdateLinks() override;
+ void ReloadAllLinks();
+ void ReloadTabLinks();
++ ScLkUpdMode GetLinkUpdateModeState() const;
+
+ void SetFormulaOptions( const ScFormulaOptions& rOpt, bool bForLoading = false );
+ /**
+--
+cgit v1.1
+
--- /dev/null
+diff --git a/Makefile.fetch b/Makefile.fetch
+index fce291d2c3ac..44f5031aac4a 100644
+--- a/Makefile.fetch
++++ b/Makefile.fetch
+@@ -52,7 +52,7 @@ $(filter 32,$(words $(shell echo $(1) | sed -e 's/./& /g')))
+ endef
+
+ define fetch_Download__subst_var
+-$(subst _DLL,_SHA256SUM,$(subst _TARBALL,_SHA256SUM,$(subst _PACK,_SHA256SUM,$(subst _JAR,_SHA256SUM,$(1)))))
++$(subst _TTF,_SHA256SUM,$(subst _DLL,_SHA256SUM,$(subst _TARBALL,_SHA256SUM,$(subst _PACK,_SHA256SUM,$(subst _JAR,_SHA256SUM,$(1))))))
+ endef
+
+ # fetch_Download_item url variable-name
+@@ -224,6 +224,7 @@ $(WORKDIR)/download: $(BUILDDIR)/config_$(gb_Side).mk $(SRCDIR)/download.lst $(S
+ ,$(call fetch_Download_item,https://dev-www.libreoffice.org/src,$(item)))
+ $(foreach item, \
+ $(call fetch_Optional,ODK,UNOWINREG_DLL) \
++ $(call fetch_Optional,OPENSYMBOL,OPENSYMBOL_TTF) \
+ $(call fetch_Optional,ODFVALIDATOR,ODFVALIDATOR_JAR) \
+ $(call fetch_Optional,OFFICEOTRON,OFFICEOTRON_JAR) \
+ ,$(call fetch_Download_item,https://dev-www.libreoffice.org/extern,$(item)))
+diff --git a/config_host.mk.in b/config_host.mk.in
+index 4a864c745424..0e3ba4864755 100644
+--- a/config_host.mk.in
++++ b/config_host.mk.in
+@@ -188,6 +188,7 @@ export FLEX=@FLEX@
+ export FLUTE_JAR=@FLUTE_JAR@
+ export FONTCONFIG_CFLAGS=$(gb_SPACE)@FONTCONFIG_CFLAGS@
+ export FONTCONFIG_LIBS=$(gb_SPACE)@FONTCONFIG_LIBS@
++export FONTFORGE=@FONTFORGE@
+ export FREEHAND_CFLAGS=$(gb_SPACE)@FREEHAND_CFLAGS@
+ export FREEHAND_LIBS=$(gb_SPACE)@FREEHAND_LIBS@
+ export FREETYPE_CFLAGS=$(gb_SPACE)@FREETYPE_CFLAGS@
+@@ -432,6 +433,7 @@ export OOO_JUNIT_JAR=@OOO_JUNIT_JAR@
+ export OOO_VENDOR=@OOO_VENDOR@
+ export OPENSSL_CFLAGS=$(gb_SPACE)@OPENSSL_CFLAGS@
+ export OPENSSL_LIBS=$(gb_SPACE)@OPENSSL_LIBS@
++export OPENSYMBOL_TTF=@OPENSYMBOL_TTF@
+ export ORCUS_CFLAGS=$(gb_SPACE)@ORCUS_CFLAGS@
+ export ORCUS_LIBS=$(gb_SPACE)@ORCUS_LIBS@
+ export OS=@OS@
+diff --git a/configure.ac b/configure.ac
+index 21218f46e41c..73e3384cf1ce 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -1315,6 +1315,12 @@ AC_ARG_ENABLE(build-unowinreg,
+ compiler is needed on Linux.]),
+ ,)
+
++AC_ARG_ENABLE(build-opensymbol,
++ AS_HELP_STRING([--enable-build-opensymbol],
++ [Do not use the prebuilt opens___.ttf. Build it instead. This needs
++ fontforge installed.]),
++,)
++
+ AC_ARG_ENABLE(dependency-tracking,
+ AS_HELP_STRING([--enable-dependency-tracking],
+ [Do not reject slow dependency extractors.])[
+@@ -11297,6 +11303,21 @@ if test "x$with_java" != "xno"; then
+ libo_CHECK_EXTENSION([LanguageTool],[LANGUAGETOOL],[languagetool],[languagetool],[])
+ fi
+
++AC_MSG_CHECKING([whether to build opens___.ttf])
++if test "$enable_build_opensymbol" = "yes"; then
++ AC_MSG_RESULT([yes])
++ AC_PATH_PROG(FONTFORGE, fontforge)
++ if test -z "$FONTFORGE"; then
++ AC_MSG_ERROR([fontforge not installed])
++ fi
++else
++ AC_MSG_RESULT([no])
++ OPENSYMBOL_TTF=49a64f3bcf20a7909ba2751349231d6652ded9cd2840e961b5164d09de3ffa63-opens___.ttf
++ BUILD_TYPE="$BUILD_TYPE OPENSYMBOL"
++fi
++AC_SUBST(OPENSYMBOL_TTF)
++AC_SUBST(FONTFORGE)
++
+ TEST_FONTS_MISSING=0
+
+ # $1 = font family
+diff --git a/download.lst b/download.lst
+index 1a5e697767b6..492b90b6b82c 100644
+--- a/download.lst
++++ b/download.lst
+@@ -256,3 +256,4 @@ export ZMF_TARBALL := libzmf-0.0.2.tar.xz
+
+ NUMBERTEXT_EXTENSION_SHA256SUM := 1568ed1d2feb8210bb5de61d69574a165cded536cfa17c6953c9064076469de2
+ UNOWINREG_SHA256SUM := eafde646a7dbe46d20c291685b0beac2382174d78d66ee990e229a1bf6e6cec6
++OPENSYMBOL_SHA256SUM := 49a64f3bcf20a7909ba2751349231d6652ded9cd2840e961b5164d09de3ffa63
+diff --git a/extras/CustomTarget_opensymbol.mk b/extras/CustomTarget_opensymbol.mk
+new file mode 100644
+index 000000000000..a27718feb377
+--- /dev/null
++++ b/extras/CustomTarget_opensymbol.mk
+@@ -0,0 +1,23 @@
++# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
++#
++# This file is part of the LibreOffice project.
++#
++# This Source Code Form is subject to the terms of the Mozilla Public
++# License, v. 2.0. If a copy of the MPL was not distributed with this
++# file, You can obtain one at http://mozilla.org/MPL/2.0/.
++#
++
++$(eval $(call gb_CustomTarget_CustomTarget,extras/fonts))
++
++$(eval $(call gb_CustomTarget_register_targets,extras/fonts,opens___.ttf))
++
++ifneq (,$(FONTFORGE))
++$(call gb_CustomTarget_get_workdir,extras/fonts)/opens___.ttf : \
++ $(SRCDIR)/extras/source/truetype/symbol/OpenSymbol.sfd
++ $(call gb_Output_announce,$(subst $(WORKDIR)/,,$@),$(true),FNT,1)
++ $(FONTFORGE) -lang=ff -c 'Open($$1); Generate($$2)' $< $@
++else
++$(call gb_CustomTarget_get_workdir,extras/fonts)/opens___.ttf : \
++ $(TARFILE_LOCATION)/$(OPENSYMBOL_TTF)
++ cp $< $@
++endif
+diff --git a/extras/Module_extras.mk b/extras/Module_extras.mk
+index 2aa41bda3901..164d38aefd1c 100644
+--- a/extras/Module_extras.mk
++++ b/extras/Module_extras.mk
+@@ -68,4 +68,8 @@ $(eval $(call gb_Module_add_targets,extras,\
+ ))
+ endif
+
++$(eval $(call gb_Module_add_targets,extras,\
++ CustomTarget_opensymbol \
++))
++
+ # vim: set noet sw=4 ts=4:
+diff --git a/extras/Package_fonts.mk b/extras/Package_fonts.mk
+index 952c8286a5e7..8d2d23cbed6b 100644
+--- a/extras/Package_fonts.mk
++++ b/extras/Package_fonts.mk
+@@ -7,8 +7,10 @@
+ # file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ #
+
+-$(eval $(call gb_Package_Package,extras_fonts,$(SRCDIR)/extras))
++$(eval $(call gb_Package_Package,extras_fonts,$(call gb_CustomTarget_get_workdir,extras/fonts)))
+
+-$(eval $(call gb_Package_add_file,extras_fonts,$(LIBO_SHARE_FOLDER)/fonts/truetype/opens___.ttf,source/truetype/symbol/opens___.ttf))
++$(eval $(call gb_Package_use_customtarget,extras_fonts,extras/fonts))
++
++$(eval $(call gb_Package_add_file,extras_fonts,$(LIBO_SHARE_FOLDER)/fonts/truetype/opens___.ttf,opens___.ttf))
+
+ # vim: set noet sw=4 ts=4:
--- /dev/null
+From c6f119c9b58a9793c68a76f12511ee393608b4f4 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Caol=C3=A1n=20McNamara?= <caolanm@redhat.com>
+Date: Fri, 16 Aug 2019 10:18:34 +0100
+Subject: an absolute uri is invalid input
+
+Change-Id: I392be4282be8ed67e3451b28d2c9f22acd4c87fc
+Reviewed-on: https://gerrit.libreoffice.org/77564
+Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
+Tested-by: Stephan Bergmann <sbergman@redhat.com>
+(cherry picked from commit 3c076e54f736980e208f5c27ecf179aa90aea103)
+Reviewed-on: https://gerrit.libreoffice.org/77571
+Tested-by: Jenkins
+---
+ scripting/source/pyprov/pythonscript.py | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/scripting/source/pyprov/pythonscript.py b/scripting/source/pyprov/pythonscript.py
+index 0f74852..d8924f8 100644
+--- a/scripting/source/pyprov/pythonscript.py
++++ b/scripting/source/pyprov/pythonscript.py
+@@ -237,6 +237,11 @@ class MyUriHelper:
+ log.debug( message )
+ raise RuntimeException( message )
+
++ if xFileUri.isAbsolute():
++ message = "pythonscript: an absolute uri is invalid '" + sFileUri+ "'"
++ log.debug( message )
++ raise RuntimeException( message )
++
+ # absolute path to the .py file
+ xAbsScriptUri = self.m_uriRefFac.makeAbsolute(xBaseUri, xFileUri, True, RETAIN)
+ sAbsScriptUri = xAbsScriptUri.getUriReference()
+--
+cgit v1.1
--- /dev/null
+diff --git a/sysui/desktop/apparmor/program.soffice.bin b/sysui/desktop/apparmor/program.soffice.bin
+index 2fc7fd6b5735..3fd82b08431e 100644
+--- a/sysui/desktop/apparmor/program.soffice.bin
++++ b/sysui/desktop/apparmor/program.soffice.bin
+@@ -144,6 +144,9 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+ /usr/lib{,32,64}/jvm/** r,
+ /usr/lib{,32,64}/jvm/**/jre/bin/java mix,
+ /usr/lib{,32,64}/jvm/**/bin/java mix,
++ # should be included in the jvm/** above but there it is
++ # a symlink, so apparmor still doesn't allow it...
++ /etc/java-??-openjdk/security/java.security r,
+ INSTDIR-** rw,
+ INSTDIR-**.so m,
+ INSTDIR-program/soffice.bin mix,
--- /dev/null
+From b3c157faeb945fd689fcc8561a520d9e611a7419 Mon Sep 17 00:00:00 2001
+From: Vincas Dargis <vindrg@gmail.com>
+Date: Sat, 4 Aug 2018 17:40:05 +0300
+Subject: [PATCH] apparmor: use dri-enumerate abstraction
+
+Remove backported rule and use new dri-enumerate abstraction instead.
+dri-enumerate is available in AppArmor 2.13, which recently migrated
+into Debian Buster.
+
+Change-Id: I64919edc1882f7bc1e65cfb94686464c5350f699
+---
+ sysui/desktop/apparmor/program.soffice.bin | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/sysui/desktop/apparmor/program.soffice.bin b/sysui/desktop/apparmor/program.soffice.bin
+index 2fc7fd6b5735..33ad6f933ef6 100644
+--- a/sysui/desktop/apparmor/program.soffice.bin
++++ b/sysui/desktop/apparmor/program.soffice.bin
+@@ -82,6 +82,7 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+ #include <abstractions/dbus>
+ #include <abstractions/dbus-session>
+ #include <abstractions/dbus-accessibility>
++ #include <abstractions/dri-enumerate>
+ #include <abstractions/ibus>
+ #include <abstractions/nameservice>
+ #include <abstractions/gnome>
+@@ -179,7 +179,6 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+ #Likely moving to abstractions in the future
+ owner @{HOME}/.icons/*/cursors/* r,
+ /etc/fstab r, # Solid::DeviceNotifier::instance() TODO: deny?
+- /sys/devices/pci[0-9]*/**/{device,subsystem_device,subsystem_vendor,uevent,vendor} r, # for libdrm
+ /usr/share/*-fonts/conf.avail/*.conf r,
+ /usr/share/fonts-config/conf.avail/*.conf r,
+ /{,var/}run/udev/data/+usb:* r, # Solid::Device::listFromQuery()
--- /dev/null
+diff --git a/sysui/desktop/apparmor/program.oosplash b/sysui/desktop/apparmor/program.oosplash
+index fef54b7ee384..9dde31a63615 100644
+--- a/sysui/desktop/apparmor/program.oosplash
++++ b/sysui/desktop/apparmor/program.oosplash
+@@ -12,7 +12,7 @@
+
+ #include <tunables/global>
+
+-profile libreoffice-oopslash INSTDIR-program/oosplash {
++profile libreoffice-oopslash INSTDIR-program/oosplash flags=(complain) {
+ #include <abstractions/base>
+ #include <abstractions/X>
+
+diff --git a/sysui/desktop/apparmor/program.soffice.bin b/sysui/desktop/apparmor/program.soffice.bin
+index b4baeab8f5ee..7861c9eac9bd 100644
+--- a/sysui/desktop/apparmor/program.soffice.bin
++++ b/sysui/desktop/apparmor/program.soffice.bin
+@@ -60,7 +60,7 @@
+
+ #include <tunables/global>
+
+-profile libreoffice-soffice INSTDIR-program/soffice.bin {
++profile libreoffice-soffice INSTDIR-program/soffice.bin flags=(complain) {
+ #include <abstractions/private-files>
+
+ #include <abstractions/audio>
--- /dev/null
+From c86e4ad53391d17d1eb54845b5999889f7e65061 Mon Sep 17 00:00:00 2001
+From: Vincas Dargis <vindrg@gmail.com>
+Date: Tue, 7 Aug 2018 20:34:21 +0300
+Subject: apparmor: update program.soffice.bin for KDE
+
+Add rules to fix file dialog and other issues with 6.2 alpha1 on Debian
+Buster with KDE desktop.
+
+Change-Id: Ib1b20c5809ac9bdea1bf2623eff4345fa42fd4f3
+Reviewed-on: https://gerrit.libreoffice.org/58702
+Tested-by: Jenkins
+Reviewed-by: Jan-Marek Glogowski <glogow@fbihome.de>
+Reviewed-by: Katarina Behrens <Katarina.Behrens@cib.de>
+---
+ sysui/desktop/apparmor/program.soffice.bin | 50 ++++++++++++++++++++++++++++++
+ 1 file changed, 50 insertions(+)
+
+diff --git a/sysui/desktop/apparmor/program.soffice.bin b/sysui/desktop/apparmor/program.soffice.bin
+index a680260..ebb012a 100644
+--- a/sysui/desktop/apparmor/program.soffice.bin
++++ b/sysui/desktop/apparmor/program.soffice.bin
+@@ -98,6 +98,7 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+ owner @{libo_user_dirs}/**~lock.* rw, #lock file support
+ owner @{libo_user_dirs}/**.@{libreoffice_ext} rwk, #Open files rw with the right exts
+ owner @{libo_user_dirs}/{,**/}lu??????????{,?}.tmp rwk, #Temporary file used when saving
++ owner @{libo_user_dirs}/{,**/}.directory r, #Read directory settings on KDE
+
+ # Settings
+ /etc/libreoffice/ r,
+@@ -107,6 +108,9 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+ /proc/*/status r,
+
+ owner @{HOME}/.config/libreoffice{,dev}/** rwk,
++ owner @{HOME}/.config/soffice.binrc rwl -> @{HOME}/.config/#[0-9]*,
++ owner @{HOME}/.config/soffice.binrc.* rwl -> @{HOME}/.config/#[0-9]*,
++ owner @{HOME}/.config/soffice.binrc.lock rwk,
+ owner @{HOME}/.cache/fontconfig/** rw,
+ owner @{HOME}/.config/gtk-???/bookmarks r, #Make bookmarks work
+ owner @{HOME}/.recently-used rwk,
+@@ -174,9 +178,18 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+
+ #Likely moving to abstractions in the future
+ owner @{HOME}/.icons/*/cursors/* r,
++ /etc/fstab r, # Solid::DeviceNotifier::instance() TODO: deny?
+ /sys/devices/pci[0-9]*/**/{device,subsystem_device,subsystem_vendor,uevent,vendor} r, # for libdrm
+ /usr/share/*-fonts/conf.avail/*.conf r,
+ /usr/share/fonts-config/conf.avail/*.conf r,
++ /{,var/}run/udev/data/+usb:* r, # Solid::Device::listFromQuery()
++ /{,var/}run/udev/data/{c,b}*:* r, # Solid::Device::description(), Solid::Device::listFromQuery()
++ @{PROC}/sys/kernel/random/boot_id r, # KRecentDocument::add() -> QSysInfo::bootUniqueId()
++
++ #To avoid "Unable to create io-slave." for file dialog
++ owner /{,var/}run/user/[0-9]*/#[0-9]* rw,
++ #For KIO IO::Slave::createSlave()
++ owner /{,var/}run/user/[0-9]*/soffice.bin*.slave-socket wl -> /{,var/}run/user/[0-9]*/#[0-9]*,
+
+ owner @{HOME}/.mozilla/firefox/profiles.ini r,
+ owner @{HOME}/.mozilla/firefox/*/secmod.db r,
+@@ -184,6 +197,9 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+ owner @{HOME}/.mozilla/firefox/*/cert8.db r,
+ # firefox >= 58
+ owner @{HOME}/.mozilla/firefox/*/cert9.db r,
++
++ owner @{HOME}/.local/share/user-places.xbel r,
++
+ # there is abstractions/gnupg but that's just for gpg1...
+ profile gpg {
+ #include <abstractions/base>
+@@ -204,4 +220,38 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+ /usr/lib/*/qt5/plugins/** rm,
+ /usr/share/plasma/look-and-feel/**/contents/defaults r,
+
++ # TODO: remove when rules are available in abstractions/kde
++ owner @{HOME}/.cache/ksycoca5_??_* r, # KDE System Configuration Cache
++ owner @{HOME}/.config/baloofilerc r, # indexing options (excludes, etc), used by KFileWidget
++ owner @{HOME}/.config/dolphinrc r, # settings used by KFileWidget
++ owner @{HOME}/.config/kde.org/libphonon.conf r, # for KNotifications::sendEvent()
++ owner @{HOME}/.config/klanguageoverridesrc r, # per-application languages, for KDEPrivate::initializeLanguages() from libKF5XmlGui.so
++ owner @{HOME}/.config/trashrc r, # user by KFileWidget
++ /usr/share/knotifications5/*.notifyrc r, # KNotification::sendEvent
++
++ # TODO: remove when rules are available in abstactions/kde-write-icon-cache or similar
++ owner @{HOME}/.cache/icon-cache.kcache rw, # for KIconLoader
++
++ # TODO: remove when rules are available in abstractions/kdeframeworks5 or simiar
++ /usr/share/kservices5/*.protocol r,
++
++ # TODO: use qt5-settings-write abstraction when it is available
++ owner @{HOME}/.config/QtProject.conf rw,
++ owner @{HOME}/.config/QtProject.conf.?????? l -> @{HOME}/.config/#[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9],
++ owner @{HOME}/.config/QtProject.conf.?????? rw, # for temporary files like QtProject.conf.Aqrgeb
++ owner @{HOME}/.config/QtProject.conf.lock rwk,
++
++ # TODO: use qt5-compose-cache-write abstraction when it is available
++ owner @{HOME}/.cache/qt_compose_cache_{little,big}_endian_* r,
++
++ # TODO: use recent-documents-write abstaction when it is available
++ owner @{HOME}/.local/share/RecentDocuments/** r,
++ owner @{HOME}/.local/share/RecentDocuments/*.desktop rwl -> @{HOME}/.local/share/RecentDocuments/#[0-9]*,
++ owner @{HOME}/.local/share/RecentDocuments/#[0-9]* rw,
++ owner @{HOME}/.local/share/RecentDocuments/*.lock rwk,
++
++ # TODO: use kde-globals-write abstraction when it is available
++ owner @{HOME}/.config/kdeglobals rw,
++ owner @{HOME}/.config/kdeglobals.* rwl -> @{HOME}/.config/#[0-9]*,
++ owner @{HOME}/.config/kdeglobals.lock rwk,
+ }
+--
+cgit v1.1
+
+From 032c3f0d8403c6c7cdc60564641687bfb56cf9b3 Mon Sep 17 00:00:00 2001
+From: Vincas Dargis <vindrg@gmail.com>
+Date: Tue, 14 Aug 2018 22:11:39 +0300
+Subject: apparmor: fix qt-related denies
+
+Commit c86e4ad53391d17d1eb54845b5999889f7e65061 introduced qt-related
+rules, like linking to ~/.config/#[0-9]* files, though does not allow to
+write the files themselves, in result producing DENIED log entries if
+AppArmor profile is enabled. This is fixed by adding read-write rule for
+particular files.
+Change-Id: I6441398c4fcfbfcf59ba5f5b3178682c1e5d1cd5
+Reviewed-on: https://gerrit.libreoffice.org/59007
+Tested-by: Jenkins
+Reviewed-by: Rene Engelhard <rene@debian.org>
+Tested-by: Rene Engelhard <rene@debian.org>
+---
+ sysui/desktop/apparmor/program.soffice.bin | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/sysui/desktop/apparmor/program.soffice.bin b/sysui/desktop/apparmor/program.soffice.bin
+index dd71b94..cf6fd4b 100644
+--- a/sysui/desktop/apparmor/program.soffice.bin
++++ b/sysui/desktop/apparmor/program.soffice.bin
+@@ -236,6 +236,7 @@ profile libreoffice-soffice INSTDIR-program/soffice.bin {
+ /usr/share/kservices5/*.protocol r,
+
+ # TODO: use qt5-settings-write abstraction when it is available
++ owner @{HOME}/.config/#[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9] rw,
+ owner @{HOME}/.config/QtProject.conf rw,
+ owner @{HOME}/.config/QtProject.conf.?????? l -> @{HOME}/.config/#[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9],
+ owner @{HOME}/.config/QtProject.conf.?????? rw, # for temporary files like QtProject.conf.Aqrgeb
+--
+cgit v1.1
+
--- /dev/null
+--- a/sysui/desktop/apparmor/program.soffice.bin-old 2018-11-09 23:04:59.858704214 +0100
++++ b/sysui/desktop/apparmor/program.soffice.bin 2018-11-09 23:05:28.050949237 +0100
+@@ -87,6 +87,7 @@
+ #include <abstractions/dbus-session>
+ #include <abstractions/dbus-accessibility>
+ #include <abstractions/dri-enumerate>
++ #include <abstractions/mesa>
+ #include <abstractions/ibus>
+ #include <abstractions/nameservice>
+ #include <abstractions/gnome>
--- /dev/null
+apparmor: Add opencl support
+
+AppArmor in Debian Buster now has OpenCL abstractions.
+
+Include OpenCL abstractions to fix OpenCL usage in Calc.
+Index: libreoffice-6.1.4/sysui/desktop/apparmor/program.soffice.bin
+===================================================================
+--- libreoffice-6.1.4.orig/sysui/desktop/apparmor/program.soffice.bin 2019-01-14 19:29:25.000000000 +0200
++++ libreoffice-6.1.4/sysui/desktop/apparmor/program.soffice.bin 2019-01-16 18:43:17.051781559 +0200
+@@ -95,6 +95,9 @@
+ # #include <abstractions/gnupg>
+ #include <abstractions/python>
+ #include <abstractions/p11-kit>
++ #include <abstractions/opencl-intel>
++ #include <abstractions/opencl-mesa>
++ #include <abstractions/opencl-nvidia>
+
+ #List directories for file browser
+ / r,
--- /dev/null
+--- a/sysui/desktop/menus/startcenter.desktop
++++ b/sysui/desktop/menus/startcenter.desktop
+@@ -31,6 +31,7 @@ StartupNotify=true
+ X-GIO-NoFuse=true
+ StartupWMClass=libreoffice-startcenter
+ X-KDE-Protocols=file,http,ftp,webdav,webdavs
++X-AppStream-Ignore=True
+
+ ##Define Actions
+ Actions=Writer;Calc;Impress;Draw;Base;Math;
--- /dev/null
+diff --git a/configure.ac b/configure.ac
+index cdae8b5..49f3ba2 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -9468,8 +9468,9 @@ if test "$with_system_lpsolve" = "yes"; then
+ # some systems need this. Like Ubuntu....
+ AC_CHECK_LIB(m, floor)
+ AC_CHECK_LIB(dl, dlopen)
++ AC_CHECK_LIB(colamd, colamd)
+ AC_CHECK_LIB([lpsolve55], [make_lp], [:],
+- [ AC_MSG_ERROR(lpsolve library not found or too old.)], [])
++ [ AC_MSG_ERROR(lpsolve library not found or too old.)], [-L/usr/lib/lp_solve])
+ LIBS=$save_LIBS
+ else
+ AC_MSG_RESULT([internal])
+diff --git a/RepositoryExternal.mk b/RepositoryExternal.mk
+index a4daea7..0dea12d 100644
+--- a/RepositoryExternal.mk
++++ b/RepositoryExternal.mk
+@@ -1961,6 +1961,7 @@ ifeq ($(WITH_LPSOLVER),lpsolve)
+
+ define gb_LinkTarget__use_lpsolve
+ $(call gb_LinkTarget_add_libs,$(1),-llpsolve55)
++$(call gb_LinkTarget_add_ldflags,$(1),-L/usr/lib/lp_solve -Wl$(COMMA)-rpath=/usr/lib/lp_solve)
+ $(call gb_LinkTarget_add_defs,$(1),\
+ -DSYSTEM_LPSOLVE \
+ )
--- /dev/null
+From 55ac0a8b13de01c5561c6e724b8bc75ea506b25d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Caol=C3=A1n=20McNamara?= <caolanm@redhat.com>
+Date: Mon, 12 Aug 2019 20:32:54 +0100
+Subject: construct final url from parsed output
+
+Change-Id: Ifd733625a439685ad307603eb2b00bf463eb9ca9
+Reviewed-on: https://gerrit.libreoffice.org/77373
+Tested-by: Jenkins
+Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
+(cherry picked from commit 87959e5deea6d33cd35dbb3b8423056f9566710e)
+Reviewed-on: https://gerrit.libreoffice.org/77379
+---
+ scripting/source/pyprov/pythonscript.py | 12 ++++++++++--
+ 1 file changed, 10 insertions(+), 2 deletions(-)
+
+diff --git a/scripting/source/pyprov/pythonscript.py b/scripting/source/pyprov/pythonscript.py
+index 64e1337..0f74852 100644
+--- a/scripting/source/pyprov/pythonscript.py
++++ b/scripting/source/pyprov/pythonscript.py
+@@ -224,7 +224,13 @@ class MyUriHelper:
+ sStorageUri = sStorageUri.replace( "|", "/" )
+
+ # path to the .py file, relative to the base
+- sFileUri = sStorageUri[0:sStorageUri.find("$")]
++ funcNameStart = sStorageUri.find("$")
++ if funcNameStart != -1:
++ sFileUri = sStorageUri[0:funcNameStart]
++ sFuncName = sStorageUri[funcNameStart+1:]
++ else:
++ sFileUri = sStorageUri
++
+ xFileUri = self.m_uriRefFac.parse(sFileUri)
+ if not xFileUri:
+ message = "pythonscript: invalid relative uri '" + sFileUri+ "'"
+@@ -241,7 +247,9 @@ class MyUriHelper:
+ log.debug( message )
+ raise RuntimeException( message )
+
+- ret = sBaseUri + sStorageUri
++ ret = sAbsScriptUri
++ if funcNameStart != -1:
++ ret = ret + "$" + sFuncName
+ log.debug( "converting scriptURI="+scriptURI + " to storageURI=" + ret )
+ return ret
+ except UnoException as e:
+--
+cgit v1.1
+
--- /dev/null
+diff --git a/configure.ac b/configure.ac
+index c12fe95a561c..66d327ae8fb8 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -2047,6 +2047,11 @@ AC_ARG_WITH(bffvalidator,
+ See https://www.microsoft.com/en-us/download/details.aspx?id=26794]),
+ ,with_bffvalidator=no)
+
++libo_FUZZ_ARG_WITH(cppunit,
++ AS_HELP_STRING([--without-cppunit>],
++ [disable building(!) of cppunit stuff also built during make build]),
++,with_cppunit=yes)
++
+ libo_FUZZ_ARG_WITH(junit,
+ AS_HELP_STRING([--with-junit=<absolute path to JUnit 4 jar>],
+ [Specifies the JUnit 4 jar file to use for JUnit-based tests.
+@@ -7932,8 +7959,12 @@ dnl ===================================================================
+ dnl Check for system cppunit
+ dnl ===================================================================
+ if test "$cross_compiling" != "yes"; then
++ if test "$with_cppunit" != "no"; then
+ libo_CHECK_SYSTEM_MODULE([cppunit],[CPPUNIT],[cppunit >= 1.14.0])
++ ENABLE_CPPUNIT=TRUE
++ fi
+ fi
++AC_SUBST(ENABLE_CPPUNIT)
+
+ dnl ===================================================================
+ dnl Check whether freetype is available
+diff --git a/config_host.mk.in b/config_host.mk.in
+index 880895e3c00f..a3dab3e00979 100644
+--- a/config_host.mk.in
++++ b/config_host.mk.in
+@@ -114,6 +115,7 @@ export SYSTEM_COINMP=@SYSTEM_COINMP@
+ export SYSTEM_COINMP=@SYSTEM_COINMP@
+ export COINMP_CFLAGS=@COINMP_CFLAGS@
+ export COINMP_LIBS=@COINMP_LIBS@
++export ENABLE_CPPUNIT=@ENABLE_CPPUNIT@
+ export ENABLE_CUPS=@ENABLE_CUPS@
+ export ENABLE_CURL=@ENABLE_CURL@
+ export ENABLE_FUZZERS=@ENABLE_FUZZERS@
+diff --git a/sal/Module_sal.mk b/sal/Module_sal.mk
+index fe9523a7a6e2..719edf8c6252 100644
+--- a/sal/Module_sal.mk
++++ b/sal/Module_sal.mk
+@@ -10,7 +10,6 @@
+ $(eval $(call gb_Module_Module,sal))
+
+ $(eval $(call gb_Module_add_targets,sal,\
+- $(if $(CROSS_COMPILING),,$(if $(filter TRUE,$(DISABLE_DYNLOADING)),,Executable_cppunittester)) \
+ $(if $(filter $(OS),ANDROID), \
+ Library_lo-bootstrap) \
+ Library_sal \
+@@ -33,4 +32,10 @@ $(eval $(call gb_Module_add_check_targets,sal,\
+
+ endif
+
++ifeq ($(ENABLE_CPPUNIT),TRUE)
++$(eval $(call gb_Module_add_check_targets,sal,\
++ $(if $(CROSS_COMPILING),,$(if $(filter TRUE,$(DISABLE_DYNLOADING)),,Executable_cppunittester)) \
++))
++endif
++
+ # vim: set noet sw=4 ts=4:
+diff --git a/sdext/Executable_pdf2xml.mk b/sdext/Executable_pdf2xml.mk
+index 373f40da36fd..c0401bef9c7a 100644
+--- a/sdext/Executable_pdf2xml.mk
++++ b/sdext/Executable_pdf2xml.mk
+@@ -13,10 +13,10 @@ $(eval $(call gb_Executable_use_sdk_api,pdf2xml))
+
+ $(eval $(call gb_Executable_use_externals,pdf2xml,\
+ boost_headers \
+- cppunit \
+ zlib \
+ ))
+
++
+ $(eval $(call gb_Executable_set_include,pdf2xml,\
+ -I$(SRCDIR)/sdext/source/pdfimport/inc \
+ $$(INCLUDE) \
+@@ -27,12 +27,20 @@ $(eval $(call gb_Executable_use_libraries,pdf2xml,\
+ vcl \
+ comphelper \
+ cppu \
+- unotest \
+ cppuhelper \
+ sal \
+ xo \
+ ))
+
++ifeq ($(ENABLE_CPPUNIT),TRUE)
++$(eval $(call gb_Executable_use_externals,pdf2xml,\
++ cppunit \
++))
++$(eval $(call gb_Executable_use_libraries,pdf2xml,\
++ unotest \
++))
++endif
++
+ $(eval $(call gb_Executable_use_library_objects,pdf2xml,pdfimport))
+
+ $(eval $(call gb_Executable_add_exception_objects,pdf2xml,\
+diff --git a/smoketest/Module_smoketest.mk b/smoketest/Module_smoketest.mk
+index 7e8b6d5f11f6..a084e254bf70 100644
+--- a/smoketest/Module_smoketest.mk
++++ b/smoketest/Module_smoketest.mk
+@@ -12,6 +12,8 @@ $(eval $(call gb_Module_Module,smoketest))
+
+ ifeq ($(CROSS_COMPILING),)
+
++ifeq ($(ENABLE_CPPUNIT),TRUE)
++
+ $(eval $(call gb_Module_add_targets,smoketest,\
+ Library_smoketest \
+ Zip_smoketestdoc \
+@@ -42,6 +44,8 @@ endif
+
+ endif
+
++endif
++
+ ifneq ($(ENABLE_JAVA),)
+ $(eval $(call gb_Module_add_targets,smoketest,\
+ Jar_smoketest \
+diff --git a/test/Module_test.mk b/test/Module_test.mk
+index e1051f16b5a0..d1787cb5789b 100644
+--- a/test/Module_test.mk
++++ b/test/Module_test.mk
+@@ -11,6 +11,7 @@ $(eval $(call gb_Module_Module,test))
+
+ ifneq (,$(filter DESKTOP,$(BUILD_TYPE)))
+
++ifeq ($(ENABLE_CPPUNIT),TRUE)
+ $(eval $(call gb_Module_add_targets,test,\
+ Library_test \
+ Library_test_setupvcl \
+@@ -18,6 +19,7 @@ $(eval $(call gb_Module_add_targets,test,\
+ Library_vclbootstrapprotector \
+ Package_unittest \
+ ))
++endif
+
+ endif
+
+diff --git a/unotest/Module_unotest.mk b/unotest/Module_unotest.mk
+index a47ca5d4b694..e243e06309f5 100644
+--- a/unotest/Module_unotest.mk
++++ b/unotest/Module_unotest.mk
+@@ -11,12 +11,15 @@
+ $(eval $(call gb_Module_Module,unotest))
+
+ ifneq (,$(filter DESKTOP,$(BUILD_TYPE)))
++
++ifeq ($(ENABLE_CPPUNIT),TRUE)
+ $(eval $(call gb_Module_add_targets,unotest,\
+ Library_unobootstrapprotector \
+ Library_unoexceptionprotector \
+ Library_unotest \
+ ))
+ endif
++endif
+
+ ifneq ($(ENABLE_JAVA),)
+ $(eval $(call gb_Module_add_targets,unotest,\
+diff --git a/testtools/Module_testtools.mk b/testtools/Module_testtools.mk
+index a1b84e175b30..08e4aad24c11 100644
+--- a/testtools/Module_testtools.mk
++++ b/testtools/Module_testtools.mk
+@@ -11,6 +11,8 @@ $(eval $(call gb_Module_Module,testtools))
+
+ ifeq ($(CROSS_COMPILING),)
+
++ifeq ($(ENABLE_CPPUNIT),TRUE)
++
+ $(eval $(call gb_Module_add_targets,testtools,\
+ CustomTarget_bridgetest \
+ InternalUnoApi_bridgetest \
+@@ -41,4 +43,6 @@ $(eval $(call gb_Module_add_check_targets,testtools,\
+
+ endif
+
++endif
++
+ # vim:set noet sw=4 ts=4:
--- /dev/null
+diff --git a/solenv/gbuild/platform/com_GCC_defs.mk b/solenv/gbuild/platform/com_GCC_defs.mk
+index 9de88a2..9161a4e 100644
+--- a/solenv/gbuild/platform/com_GCC_defs.mk
++++ b/solenv/gbuild/platform/com_GCC_defs.mk
+@@ -170,6 +170,8 @@ gb_COMPILERNOOPTFLAGS := -O0 -fstrict-aliasing -fstrict-overflow
+ ifeq ($(OS),ANDROID)
+ gb_DEBUGINFO_FLAGS=-glldb
+ # Clang does not know -ggdb2 or some other options
++else ifeq ($(ENABLE_SYMBOLS),SMALL)
++gb_DEBUGINFO_FLAGS=-g1
+ else ifeq ($(HAVE_GCC_GGDB2),TRUE)
+ gb_DEBUGINFO_FLAGS=-ggdb2
+ else
+diff --git a/configure.ac b/configure.ac
+index a91de78..1c03b1d 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -4043,15 +4043,20 @@ if test -z "$enable_symbols"; then
+ fi
+ fi
+ if test "$enable_symbols" != no; then
+- ENABLE_SYMBOLS=TRUE
+- AC_MSG_RESULT([yes])
++ if test "$enable_symbols" = "SMALL" -o "$enable_symbols" = "small"; then
++ ENABLE_SYMBOLS="SMALL"
++ AC_MSG_RESULT([yes, small ones])
++ else
++ ENABLE_SYMBOLS=TRUE
++ AC_MSG_RESULT([yes])
++ fi
+ else
+ ENABLE_SYMBOLS=
+ AC_MSG_RESULT([no])
+ fi
+ AC_SUBST(ENABLE_SYMBOLS)
+
+-if test -n "$with_android_ndk" -a \( -n "$ENABLE_SYMBOLS" -o -n "$ENABLE_DEBUG" -o -n "$ENABLE_DBGUTIL" \) -a "$ENABLE_DEBUGINFO_FOR" = "all"; then
++if test -n "$with_android_ndk" -a \( "$ENABLE_SYMBOLS" != "SMALL" -o -n "$ENABLE_DEBUG" -o -n "$ENABLE_DBGUTIL" \) -a "$ENABLE_DEBUGINFO_FOR" = "all"; then
+ # Building on Android with full symbols: without enough memory the linker never finishes currently.
+ AC_MSG_CHECKING([whether enough memory is available for linking])
+ mem_size=$(grep -o 'MemTotal: *.\+ kB' /proc/meminfo | sed 's/MemTotal: *\(.\+\) kB/\1/')
--- /dev/null
+--- a/configure.ac-old 2012-03-02 21:48:47.000000000 +0000
++++ b/configure.ac 2012-03-02 21:51:29.000000000 +0000
+@@ -10225,6 +10225,11 @@ else
+ fi
+ AC_SUBST(ENABLE_VLC)
+
++if test -x /usr/bin/dpkg-buildflags; then
++ HARDEN_CPPFLAGS=`dpkg-buildflags --get CPPFLAGS 2>/dev/null`
++fi
++AC_SUBST(HARDEN_CPPFLAGS)
++
+ ENABLE_OPENGL_TRANSITIONS=
+ ENABLE_OPENGL_CANVAS=
+ if test $_os = iOS -o $_os = Android -o "$ENABLE_FUZZERS" = "TRUE"; then
+--- a/config_host.mk.in-old 2012-04-06 14:17:55.164239390 +0200
++++ b/config_host.mk.in 2012-04-06 14:18:55.440239065 +0200
+@@ -76,6 +76,7 @@
+ export CPPUNIT_LIBS=$(gb_SPACE)@CPPUNIT_LIBS@
+ export CPUNAME=@CPUNAME@
+ export CDEFAULTOPT=@CDEFAULTOPT@
++export HARDEN_CPPFLAGS=@HARDEN_CPPFLAGS@
+ export CROSS_COMPILING=@CROSS_COMPILING@
+ export CURL=@CURL@
+ export CURL_CFLAGS=$(gb_SPACE)@CURL_CFLAGS@
+diff --git a/solenv/gbuild/gbuild.mk b/solenv/gbuild/gbuild.mk
+index c71cb40..f826d65 100644
+--- a/solenv/gbuild/gbuild.mk
++++ b/solenv/gbuild/gbuild.mk
+@@ -259,6 +259,8 @@ gb_GLOBALDEFS += \
+ ENABLE_LTO \
+ )
+
++gb_GLOBALDEFS += $(HARDEN_CPPFLAGS)
++
+ gb_GLOBALDEFS := $(sort $(gb_GLOBALDEFS))
+
+ # This is used to detect whether LibreOffice is being built (as opposed to building
--- /dev/null
+don't hardcode -fstack-protector-strong in configure.ac/gbuild. We get the
+hardening flags from dpkg-buildflags anyway.
+
+--- a/configure.ac-old 2012-03-02 21:48:47.000000000 +0000
++++ b/configure.ac 2012-03-02 21:51:29.000000000 +0000
+@@ -5751,17 +5751,6 @@ if test "$GCC" = "yes"; then
+ AC_MSG_RESULT([no])
+ fi
+
+- AC_MSG_CHECKING([whether $CC supports -fstack-protector-strong])
+- save_CFLAGS=$CFLAGS
+- CFLAGS="$CFLAGS -Werror -fstack-protector-strong"
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ HAVE_GCC_STACK_PROTECTOR_STRONG=TRUE ],[])
+- CFLAGS=$save_CFLAGS
+- if test "$HAVE_GCC_STACK_PROTECTOR_STRONG" = "TRUE"; then
+- AC_MSG_RESULT([yes])
+- else
+- AC_MSG_RESULT([no])
+- fi
+-
+ AC_MSG_CHECKING([whether $CC supports atomic functions])
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[
+ int v = 0;
+diff --git a/solenv/gbuild/platform/com_GCC_defs.mk b/solenv/gbuild/platform/com_GCC_defs.mk
+index 7acd068..b6d9735 100644
+--- a/solenv/gbuild/platform/com_GCC_defs.mk
++++ b/solenv/gbuild/platform/com_GCC_defs.mk
+@@ -113,12 +113,6 @@ endif
+ gb_VISIBILITY_FLAGS_CXX := -fvisibility-inlines-hidden
+ gb_CXXFLAGS_COMMON += $(gb_VISIBILITY_FLAGS_CXX)
+
+-ifeq ($(HAVE_GCC_STACK_PROTECTOR_STRONG),TRUE)
+-gb_CFLAGS_COMMON += -fstack-protector-strong
+-gb_CXXFLAGS_COMMON += -fstack-protector-strong
+-gb_LinkTarget_LDFLAGS += -fstack-protector-strong
+-endif
+-
+ ifeq ($(ENABLE_PCH),TRUE)
+ ifneq ($(COM_IS_CLANG),TRUE)
+ gb_CFLAGS_COMMON += -fpch-preprocess -Winvalid-pch
+--- a/config_host.mk.in-old 2012-04-06 14:17:55.164239390 +0200
++++ b/config_host.mk.in 2012-04-06 14:18:55.440239065 +0200
+@@ -240,7 +240,6 @@ export GUIBASE=@GUIBASE@
+ export USING_X11=@USING_X11@
+ export HAMCREST_JAR=@HAMCREST_JAR@
+ export HAVE_GCC_AVX=@HAVE_GCC_AVX@
+-export HAVE_GCC_STACK_PROTECTOR_STRONG=@HAVE_GCC_STACK_PROTECTOR_STRONG@
+ export HAVE_GCC_BUILTIN_ATOMIC=@HAVE_GCC_BUILTIN_ATOMIC@
+ export HAVE_GCC_BUILTIN_FFS=@HAVE_GCC_BUILTIN_FFS@
+ export HAVE_GCC_FINLINE_LIMIT=@HAVE_GCC_FINLINE_LIMIT@
--- /dev/null
+diff --git a/configure.ac b/configure.ac
+index f06ef8e..91ce612 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -12776,6 +12776,9 @@ fi
+
+ AC_SUBST(ENABLE_FORMULA_LOGGER)
+
++CDEFAULTOPT=`echo $CFLAGS 2>/dev/null | grep -E -o "\-O[[0-3]]"`
++AC_SUBST(CDEFAULTOPT)
++
+ dnl ===================================================================
+ dnl Setting up the environment.
+ dnl ===================================================================
+diff --git a/config_host.mk.in b/config_host.mk.in
+index 1ec3268..abb45b1 100644
+--- a/config_host.mk.in
++++ b/config_host.mk.in
+@@ -69,6 +69,7 @@ export CPP_LIBRARY=@CPP_LIBRARY@
+ export CPPUNIT_CFLAGS=$(gb_SPACE)@CPPUNIT_CFLAGS@
+ export CPPUNIT_LIBS=$(gb_SPACE)@CPPUNIT_LIBS@
+ export CPUNAME=@CPUNAME@
++export CDEFAULTOPT=@CDEFAULTOPT@
+ export CROSS_COMPILING=@CROSS_COMPILING@
+ export CURL=@CURL@
+ export CURL_CFLAGS=$(gb_SPACE)@CURL_CFLAGS@
--- /dev/null
+From 5c3ba8ae6bc2521b44a78b33e354fe906a74014e Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Caol=C3=A1n=20McNamara?= <caolanm@redhat.com>
+Date: Fri, 26 Jul 2019 13:25:31 +0100
+Subject: decode url escape codes and check each path segment
+
+Change-Id: Ie8f7cef912e8dacbc2a0bca73534a7a242a53ca1
+Reviewed-on: https://gerrit.libreoffice.org/76395
+Reviewed-by: Michael Stahl <Michael.Stahl@cib.de>
+Tested-by: Jenkins
+(cherry picked from commit 0344b7684753876a3148a47d1e131a1b13595f63)
+Reviewed-on: https://gerrit.libreoffice.org/76538
+Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
+Tested-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
+---
+ sfx2/source/doc/objmisc.cxx | 29 ++++++++++++++++++++++++++++-
+ 1 file changed, 28 insertions(+), 1 deletion(-)
+
+diff --git a/sfx2/source/doc/objmisc.cxx b/sfx2/source/doc/objmisc.cxx
+index 0e188b9..8a6ff1b 100644
+--- a/sfx2/source/doc/objmisc.cxx
++++ b/sfx2/source/doc/objmisc.cxx
+@@ -43,6 +43,8 @@
+ #include <com/sun/star/script/provider/XScriptProvider.hpp>
+ #include <com/sun/star/script/provider/XScriptProviderSupplier.hpp>
+ #include <com/sun/star/ucb/SimpleFileAccess.hpp>
++#include <com/sun/star/uri/UriReferenceFactory.hpp>
++#include <com/sun/star/uri/XVndSunStarScriptUrlReference.hpp>
+ #include <com/sun/star/util/XModifiable.hpp>
+
+ #include <toolkit/helper/vclunohelper.hxx>
+@@ -1347,7 +1349,32 @@ namespace
+ // don't allow LibreLogo to be used with our mouseover/etc dom-alike events
+ bool SfxObjectShell::UnTrustedScript(const OUString& rScriptURL)
+ {
+- return rScriptURL.startsWithIgnoreAsciiCase("vnd.sun.star.script:LibreLogo");
++ if (!rScriptURL.startsWith("vnd.sun.star.script:"))
++ return false;
++
++ // ensure URL Escape Codes are decoded
++ css::uno::Reference<css::uri::XUriReference> uri(
++ css::uri::UriReferenceFactory::create(comphelper::getProcessComponentContext())->parse(rScriptURL));
++ css::uno::Reference<css::uri::XVndSunStarScriptUrl> sfUri(uri, css::uno::UNO_QUERY);
++
++ if (!sfUri.is())
++ return false;
++
++ OUString sScript = sfUri->getName();
++
++ // check if any path portion matches LibreLogo and ban it if it does
++ sal_Int32 nIndex = 0;
++ do
++ {
++ OUString aToken = sScript.getToken(0, '/', nIndex);
++ if (aToken.startsWithIgnoreAsciiCase("LibreLogo"))
++ {
++ return true;
++ }
++ }
++ while (nIndex >= 0);
++
++ return false;
+ }
+
+ ErrCode SfxObjectShell::CallXScript( const Reference< XInterface >& _rxScriptContext, const OUString& _rScriptURL,
+--
+cgit v1.1
+
--- /dev/null
+14:13 < mst__> _rene_, the toolkit unoapi tests are known to be flaky (in some
+ system dependent way) e.g. on the Win@6 tinderbox it always
+ crashes
+14:14 < mst__> _rene_, sc.ScAccessible* tests also fail on some systems some of
+ the time
+
+diff --git a/toolkit/Module_toolkit.mk b/toolkit/Module_toolkit.mk
+index 25db0b6..14e507c 100644
+--- a/toolkit/Module_toolkit.mk
++++ b/toolkit/Module_toolkit.mk
+@@ -26,11 +26,11 @@ $(eval $(call gb_Module_add_targets,toolkit,\
+ ifneq ($(OOO_JUNIT_JAR),)
+ $(eval $(call gb_Module_add_subsequentcheck_targets,toolkit,\
+ JunitTest_toolkit_complex \
+- JunitTest_toolkit_unoapi_1 \
+- JunitTest_toolkit_unoapi_2 \
+- JunitTest_toolkit_unoapi_3 \
+- JunitTest_toolkit_unoapi_4 \
+ ))
+ endif
++# JunitTest_toolkit_unoapi_1 \
++# JunitTest_toolkit_unoapi_2 \
++# JunitTest_toolkit_unoapi_3 \
++# JunitTest_toolkit_unoapi_4 \
+
+ # vim: set noet sw=4 ts=4:
+diff --git a/sc/qa/unoapi/sc_1.sce b/sc/qa/unoapi/sc_1.sce
+index fa1684c..cc8e1a5 100644
+--- a/sc/qa/unoapi/sc_1.sce
++++ b/sc/qa/unoapi/sc_1.sce
+@@ -24,10 +24,3 @@
+ # i84554 -o sc.AccessibleEditableTextPara_PreviewNote
+ # i88241 -o sc.AccessibleEditableTextPara_HeaderFooter
+ -o sc.AccessibleEditableTextPara_PreviewCell
+--o sc.ScAccessibleCell
+-# i91044 -o sc.ScAccessibleCsvCell
+-# i91044 -o sc.ScAccessibleCsvGrid
+-# i84641 -o sc.ScAccessibleCsvRuler
+-# i88330 -o sc.ScAccessibleDocument
+-# i91045 -o sc.ScAccessibleDocumentPagePreview
+--o sc.ScAccessiblePageHeader
+diff --git a/sc/qa/unoapi/sc_2.sce b/sc/qa/unoapi/sc_2.sce
+index dbfc3e1..d235c5d 100644
+--- a/sc/qa/unoapi/sc_2.sce
++++ b/sc/qa/unoapi/sc_2.sce
+@@ -15,11 +15,6 @@
+ # except in compliance with the License. You may obtain a copy of
+ # the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ #
+-# fdo#FOO -o sc.ScAccessiblePageHeaderArea
+--o sc.ScAccessiblePreviewCell
+--o sc.ScAccessiblePreviewHeaderCell
+--o sc.ScAccessiblePreviewTable
+-# fdo#45337 -o sc.ScAccessibleSpreadsheet
+ # FIXME_REMOVE_WHEN_RE_BASE_COMPLETE
+ # -o sc.ScAnnotationObj
+ # -o sc.ScAnnotationShapeObj
+
+12:18 < _rene_> chris_wot: ping?
+12:18 < chris_wot> heya
+12:18 < chris_wot> you pinged?
+12:19 < _rene_> chris_wot: any news on
+ https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=815292?
+12:20 < _rene_> (of course the this-night-uploaded rc3 also failed)
+12:21 < chris_wot> ah, sorry - I've looked at an EMF regression, but I've not
+ gotten any further on that one
+12:22 < chris_wot> I honestly think that for this one just disable the test for
+ now
+12:22 < chris_wot> I'll ping the ML
+
+This seems fixed when opening the original doc.
+
+diff --git a/sw/qa/extras/ooxmlexport/ooxmlexport7.cxx b/sw/qa/extras/ooxmlexport/ooxmlexport7.cxx
+index 54eed4d..78019bd 100644
+--- a/sw/qa/extras/ooxmlexport/ooxmlexport7.cxx
++++ b/sw/qa/extras/ooxmlexport/ooxmlexport7.cxx
+@@ -1128,30 +1128,30 @@ DECLARE_OOXMLEXPORT_TEST(testTDF93675, "no-numlevel-but-indented.odt")
+
+
+
+-DECLARE_OOXMLEXPORT_TEST(testFlipAndRotateCustomShape, "flip_and_rotate.odt")
+-{
+- xmlDocPtr pXmlDoc = parseExport("word/document.xml");
+- if (!pXmlDoc)
+- return;
+- // there should be no flipH and flipV attributes in this case
+- assertXPathNoAttribute(pXmlDoc, "//a:xfrm", "flipH");
+- assertXPathNoAttribute(pXmlDoc, "//a:xfrm", "flipV");
+- // check rotation angle
+- assertXPath(pXmlDoc, "//a:xfrm", "rot", "13500000");
+- // check the first few coordinates of the polygon
+-#ifndef MACOSX /* Retina-related rounding roundtrip error
+- * hard to smooth out due to the use of string compare
+- * instead of number */
+-#if !defined(_WIN32)
+- assertXPath(pXmlDoc, "//a:custGeom/a:pathLst/a:path/a:lnTo[1]/a:pt", "x", "2351");
+- assertXPath(pXmlDoc, "//a:custGeom/a:pathLst/a:path/a:lnTo[1]/a:pt", "y", "3171");
+- assertXPath(pXmlDoc, "//a:custGeom/a:pathLst/a:path/a:lnTo[2]/a:pt", "x", "1695");
+- assertXPath(pXmlDoc, "//a:custGeom/a:pathLst/a:path/a:lnTo[2]/a:pt", "y", "3171");
+- assertXPath(pXmlDoc, "//a:custGeom/a:pathLst/a:path/a:lnTo[3]/a:pt", "x", "1695");
+- assertXPath(pXmlDoc, "//a:custGeom/a:pathLst/a:path/a:lnTo[3]/a:pt", "y", "1701");
+-#endif
+-#endif
+-}
++//DECLARE_OOXMLEXPORT_TEST(testFlipAndRotateCustomShape, "flip_and_rotate.odt")
++//{
++// xmlDocPtr pXmlDoc = parseExport("word/document.xml");
++// if (!pXmlDoc)
++// return;
++// // there should be no flipH and flipV attributes in this case
++// assertXPathNoAttribute(pXmlDoc, "//a:xfrm", "flipH");
++// assertXPathNoAttribute(pXmlDoc, "//a:xfrm", "flipV");
++// // check rotation angle
++// assertXPath(pXmlDoc, "//a:xfrm", "rot", "13500000");
++// // check the first few coordinates of the polygon
++//#ifndef MACOSX /* Retina-related rounding roundtrip error
++// * hard to smooth out due to the use of string compare
++// * instead of number */
++//#if !defined(_WIN32)
++// assertXPath(pXmlDoc, "//a:custGeom/a:pathLst/a:path/a:lnTo[1]/a:pt", "x", "2351");
++// assertXPath(pXmlDoc, "//a:custGeom/a:pathLst/a:path/a:lnTo[1]/a:pt", "y", "3171");
++// assertXPath(pXmlDoc, "//a:custGeom/a:pathLst/a:path/a:lnTo[2]/a:pt", "x", "1695");
++// assertXPath(pXmlDoc, "//a:custGeom/a:pathLst/a:path/a:lnTo[2]/a:pt", "y", "3171");
++// assertXPath(pXmlDoc, "//a:custGeom/a:pathLst/a:path/a:lnTo[3]/a:pt", "x", "1695");
++// assertXPath(pXmlDoc, "//a:custGeom/a:pathLst/a:path/a:lnTo[3]/a:pt", "y", "1701");
++//#endif
++//#endif
++//}
+
+
+ CPPUNIT_PLUGIN_IMPLEMENT();
+diff --git a/svx/qa/unoapi/svx.sce b/svx/qa/unoapi/svx.sce
+index 1c3925f..a16f001 100644
+--- a/svx/qa/unoapi/svx.sce
++++ b/svx/qa/unoapi/svx.sce
+@@ -25,7 +25,7 @@
+ #i111216 -o svx.AccessiblePresentationGraphicShape
+ #i111216 -o svx.AccessiblePresentationOLEShape
+ #i85539 -o svx.AccessiblePresentationShape
+--o svx.AccessibleShape
++#-o svx.AccessibleShape
+ #i90294 -o svx.GraphicExporter
+ -o svx.SvxDrawPage
+ #i85501 -o svx.SvxGraphCtrlAccessibleContext
+
+19:26 <@x1sc0> _rene_, since that test is using exact dimensions, it seems it
+ fails on your side probably because the paragraph style is
+ different. 1. I will change the test to avoid the exact
+ dimensions. 2. meantime you can skip that test:
+https://cgit.freedesktop.org/libreoffice/core/commit/?id=e05f16e6bf36efbaab16dd2ed1427a750ce7cafd
+19:26 < IZBot> core - disable UI test that does exact comparison
+19:27 < _rene_> mmh, ok, saw that but that was for a different test, so.. :)
+19:27 -!- jacobo [~jaragunde@fanzine.igalia.com] has quit [Quit: Leaving.]
+19:27 < _rene_> thanks, will do
+
+diff --git a/uitest/writer_tests/tdf79236.py b/uitest/writer_tests/tdf79236.py
+index 8585e48d8c64..704f42c009a1 100644
+--- a/uitest/writer_tests/tdf79236.py
++++ b/uitest/writer_tests/tdf79236.py
+@@ -8,8 +8,11 @@ from uitest.framework import UITestCase
+ import time
+ from uitest.uihelper.common import get_state_as_dict, type_text
+
++import unittest
++
+ class tdf79236(UITestCase):
+
++ @unittest.skip("Currently broken")
+ def test_paragraph(self):
+
+ self.ui_test.create_doc_in_start_center("writer")
+
+14:39 < ztamas> _rene_: chart2dump is used to fail because of font size differences, just use a bigger delta or disable it if it
+ fails for you.
+14:40 <@sberg_> noelgrandin, no
+14:40 < noelgrandin> sberg_, sure seems that way both in the debugger and in the resulting SAL_WARN output
+14:42 < ztamas> _rene_: there were some work on making font rendering consistent on different platforms, but it's not finished
+ yet, I guess
+diff --git a/chart2/Module_chart2.mk b/chart2/Module_chart2.mk
+index 3273055d5373..cb452139170c 100644
+--- a/chart2/Module_chart2.mk
++++ b/chart2/Module_chart2.mk
+@@ -33,9 +33,9 @@ $(eval $(call gb_Module_add_slowcheck_targets,chart2,\
+ CppunitTest_chart2_export \
+ CppunitTest_chart2_import \
+ CppunitTest_chart2_trendcalculators \
+- CppunitTest_chart2_dump \
+ CppunitTest_chart2_pivot_chart_test \
+ ))
++# CppunitTest_chart2_dump \
+
+ ifeq ($(ENABLE_CHART_TESTS),TRUE)
+ ifeq ($(WITH_FONTS), TRUE)
+diff --git a/sw/qa/extras/ooxmlimport/ooxmlimport2.cxx b/sw/qa/extras/ooxmlimport/ooxmlimport2.cxx
+index eb3b42a31387..120df8faa548 100644
+--- a/sw/qa/extras/ooxmlimport/ooxmlimport2.cxx
++++ b/sw/qa/extras/ooxmlimport/ooxmlimport2.cxx
+@@ -161,13 +161,13 @@ DECLARE_OOXMLIMPORT_TEST(testTdf43017, "tdf43017.docx")
+ getProperty<sal_Int32>(xText, "CharColor"));
+ }
+
+-DECLARE_OOXMLIMPORT_TEST(testTdf112443, "tdf112443.docx")
++/*DECLARE_OOXMLIMPORT_TEST(testTdf112443, "tdf112443.docx")
+ {
+ // the position of the flying text frame should be off page
+ // 30624 below its anchor
+ OUString aTop = parseDump("//fly[1]/infos/bounds", "top");
+ CPPUNIT_ASSERT_EQUAL(OUString("30624"), aTop);
+-}
++}*/
+
+ // DOCX: Textbox wrap differs in MSO and LO
+ // Both should layout text regardless of existing text box
--- /dev/null
+diff --git a/config_host.mk.in b/config_host.mk.in
+index 8cbbc5fee1d5..40e37643a0ea 100644
+--- a/config_host.mk.in
++++ b/config_host.mk.in
+@@ -282,6 +282,7 @@ export JAVAFLAGS=@JAVAFLAGS@
+ export JAVAIFLAGS=@JAVAIFLAGS@
+ export JAVA_CLASSPATH_NOT_SET=@JAVA_CLASSPATH_NOT_SET@
+ export JAVAINTERPRETER=@JAVAINTERPRETER@
++export JAVA_HAS_ZERO_VM=@JAVA_HAS_ZERO_VM@
+ export JAVA_HOME=@JAVA_HOME@
+ export JAVA_SOURCE_VER=@JAVA_SOURCE_VER@
+ export JAVA_TARGET_VER=@JAVA_TARGET_VER@
+diff --git a/configure.ac b/configure.ac
+index e6bfb13ebab8..3b7f0a2e1121 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -6675,6 +6675,14 @@ you must use the "--with-jdk-home" configure option explicitly])
+ JAVAIFLAGS=-Xmx64M
+ # set to limit VM usage for javac
+ JAVAFLAGS=-J-Xmx128M
++
++ AC_MSG_CHECKING([whether $JAVAINTERPRETER is using the Zero VM])
++ if $JAVAINTERPRETER -version 2>&1 | grep -q Zero; then
++ JAVA_HAS_ZERO_VM=y
++ AC_MSG_RESULT([yes])
++ else
++ AC_MSG_RESULT([no])
++ fi
+ fi
+ else
+ AC_MSG_ERROR([Java not found. You need at least jdk-1.6])
+@@ -6684,6 +6689,7 @@ else
+ JAVA_HOME=
+ export JAVA_HOME
+ fi
++AC_SUBST(JAVA_HAS_ZERO_VM)
+
+ dnl ===================================================================
+ dnl Set target Java bytecode version
+diff --git a/odk/Module_odk.mk b/odk/Module_odk.mk
+index 410f8cf8ef1e..bd05d4bba200 100644
+--- a/odk/Module_odk.mk
++++ b/odk/Module_odk.mk
+@@ -60,10 +62,14 @@ $(eval $(call gb_Module_add_check_targets,odk,\
+ ifneq ($(filter $(OS),LINUX MACOSX),)
+ $(eval $(call gb_Module_add_subsequentcheck_targets,odk, \
+ CustomTarget_build-examples \
++))
++ifneq ($(JAVA_HAS_ZERO_VM),y)
++$(eval $(call gb_Module_add_subsequentcheck_targets,odk, \
+ $(if $(ENABLE_JAVA),\
+ CustomTarget_build-examples_java \
+ ) \
+ ))
+ endif
++endif
+
+ # vim: set noet sw=4 ts=4:
--- /dev/null
+# fails with internal cppunit:
+#
+# [build LNK] CppunitTest/libtest_sc_subsequent_filters_test.so
+# S=/data/rene/git/LibreOffice/master && I=$S/instdir && W=$S/workdir && /usr/bin/ccache x86_64-linux-gnu-g++ -shared -Wl,-z,noexecstack -Wl,-z,origin '-Wl,-rpath,$ORIGIN/../Library' -Wl,-rpath-link,$I/program -Wl,-z,defs -Wl,-rpath-link,/lib:/usr/lib -Wl,-z,combreloc -Wl,--hash-style=gnu -Wl,--dynamic-list-cpp-new -Wl,--dynamic-list-cpp-typeinfo -Wl,-Bsymbolic-functions -L$W/LinkTarget/StaticLibrary -L$I/sdk/lib -L$I/program -L$I/program -L$W/LinkTarget/Library -Wl,-z,relro -L/usr/lib/x86_64-linux-gnu -L/usr/lib/x86_64-linux-gnu -L/usr/lib/x86_64-linux-gnu $W/CxxObject/sc/qa/unit/subsequent_filters-test.o -Wl,--start-group -L$W/UnpackedTarball/cppunit/src/cppunit/.libs -lcppunit -lxml2 -lorcus-0.12 -lorcus-parser-0.12 -lboost_filesystem -lboost_iostreams -lz -Wl,--end-group -Wl,--no-as-needed -lmergedlo -luno_cppu -luno_cppuhelpergcc3 -lforlo -lforuilo -li18nlangtag -looxlo -luno_sal -luno_salhelpergcc3 -lsclo -lscqahelper -lsubsequenttest -ltest -lunotest -lvbahelperlo -o $W/LinkTarget/CppunitTest/libtest_sc_subsequent_filters_test.so
+# /data/rene/git/LibreOffice/master/workdir/CxxObject/sc/qa/unit/subsequent_filters-test.o:(.data.rel.ro._ZTIN7CppUnit17AdditionalMessageE[_ZTIN7CppUnit17AdditionalMessageE]+0x10): undefined reference to `typeinfo for CppUnit::Message'
+# collect2: error: ld returned 1 exit status
+# /data/rene/git/LibreOffice/master/solenv/gbuild/LinkTarget.mk:598: recipe for target '/data/rene/git/LibreOffice/master/workdir/LinkTarget/CppunitTest/libtest_sc_subsequent_filters_test.so' failed
+# make[4]: *** [/data/rene/git/LibreOffice/master/workdir/LinkTarget/CppunitTest/libtest_sc_subsequent_filters_test.so] Error 1
+#
+# interestingly, this works with system-cppunit...
+
+diff --git a/sc/Module_sc.mk b/sc/Module_sc.mk
+index ca37c6413780..6744ae54453f 100644
+--- a/sc/Module_sc.mk
++++ b/sc/Module_sc.mk
+@@ -35,17 +35,12 @@ endif
+ ifneq ($(OS),IOS)
+ $(eval $(call gb_Module_add_check_targets,sc,\
+ Library_scqahelper \
+- $(if $(and $(filter $(COM),MSC),$(MERGELIBS)),, \
+- CppunitTest_sc_ucalc) \
+ CppunitTest_sc_bugfix_test \
+ CppunitTest_sc_filters_test \
+ CppunitTest_sc_rangelst_test \
+ CppunitTest_sc_range_test \
+ CppunitTest_sc_mark_test \
+ CppunitTest_sc_core \
+- CppunitTest_sc_dataprovider \
+- CppunitTest_sc_datatransformation \
+- CppunitTest_sc_cache_test \
+ ))
+
+ ifneq ($(ENABLE_HEADLESS),TRUE)
+@@ -59,13 +54,25 @@ endif
+ $(eval $(call gb_Module_add_slowcheck_targets,sc, \
+ CppunitTest_sc_cond_format_merge \
+ CppunitTest_sc_new_cond_format_api \
+- CppunitTest_sc_subsequent_filters_test \
+ CppunitTest_sc_subsequent_export_test \
+ CppunitTest_sc_html_export_test \
+ CppunitTest_sc_copypaste \
+ CppunitTest_sc_pivottable_filters_test \
+ ))
+
++ifeq ($(SYSTEM_CPPUNIT),TRUE)
++$(eval $(call gb_Module_add_check_targets,sc, \
++ $(if $(and $(filter $(COM),MSC),$(MERGELIBS)),, \
++ CppunitTest_sc_ucalc) \
++ CppunitTest_sc_dataprovider \
++ CppunitTest_sc_datatransformation \
++ CppunitTest_sc_cache_test \
++))
++$(eval $(call gb_Module_add_slowcheck_targets,sc, \
++ CppunitTest_sc_subsequent_filters_test \
++))
++endif
++
+ # Various function tests fail in 32-bit linux_x86 build due to dreaded floating
+ # point weirdness (x87, registers, compiler optimization, ... whatever),
+ # disable them until someone finds a real cure.
+diff --git a/sccomp/Module_sccomp.mk b/sccomp/Module_sccomp.mk
+index ef6d47984bf2..c92afe3fbb38 100644
+--- a/sccomp/Module_sccomp.mk
++++ b/sccomp/Module_sccomp.mk
+@@ -29,7 +29,12 @@ $(eval $(call gb_Module_add_l10n_targets,sccomp,\
+
+ $(eval $(call gb_Module_add_check_targets,sccomp,\
+ CppunitTest_sccomp_solver \
++))
++
++ifeq ($(SYSTEM_CPPUNIT),TRUE)
++$(eval $(call gb_Module_add_check_targets,sccomp,\
+ $(if $(and $(filter INTEL,$(CPUNAME)),$(filter -fsanitize=%,$(gb_CXX))),,CppunitTest_sccomp_swarmsolvertest) \
+ ))
++endif
+
+ # vim: set noet sw=4 ts=4:
--- /dev/null
+diff --git a/vcl/Module_vcl.mk b/vcl/Module_vcl.mk
+index a5e4bf5d68d2..3e9e1bf9fe27 100644
+--- a/vcl/Module_vcl.mk
++++ b/vcl/Module_vcl.mk
+@@ -28,28 +28,9 @@ $(eval $(call gb_Module_add_targets,vcl,\
+ StaticLibrary_vclmain \
+ $(if $(ENABLE_MACOSX_SANDBOX),, \
+ $(if $(ENABLE_HEADLESS),, \
+- Executable_ui-previewer)) \
+- $(if $(filter LINUX MACOSX SOLARIS WNT %BSD,$(OS)), \
+- Executable_outdevgrind \
+- $(if $(ENABLE_HEADLESS),, \
+- Executable_vcldemo \
+- Executable_icontest \
+- Executable_visualbackendtest \
+- Executable_mtfdemo ))) \
++ Executable_ui-previewer))) \
+ ))
+
+-ifeq ($(CROSS_COMPILING)$(DISABLE_DYNLOADING),)
+-
+-$(eval $(call gb_Module_add_targets,vcl,\
+- $(if $(filter-out ANDROID IOS WNT,$(OS)), \
+- Executable_svdemo \
+- Executable_fftester \
+- Executable_svptest \
+- Executable_svpclient) \
+-))
+-
+-endif
+-
+ $(eval $(call gb_Module_add_l10n_targets,vcl,\
+ AllLangMoTarget_vcl \
+ ))
+diff --git a/xmlsecurity/Module_xmlsecurity.mk b/xmlsecurity/Module_xmlsecurity.mk
+index d3fafeb7e4ec..87b8c067903e 100644
+--- a/xmlsecurity/Module_xmlsecurity.mk
++++ b/xmlsecurity/Module_xmlsecurity.mk
+@@ -45,14 +45,6 @@ $(eval $(call gb_Module_add_screenshot_targets,xmlsecurity,\
+ CppunitTest_xmlsecurity_dialogs_test \
+ ))
+
+-ifneq (,$(filter DESKTOP,$(BUILD_TYPE)))
+-
+-$(eval $(call gb_Module_add_targets,xmlsecurity,\
+- Executable_pdfverify \
+-))
+-
+-endif
+-
+ endif
+
+ # vim: set noet sw=4 ts=4:
+diff --git a/libreofficekit/Module_libreofficekit.mk b/libreofficekit/Module_libreofficekit.mk
+index 351f89a33e48..defe0b14a681 100644
+--- a/libreofficekit/Module_libreofficekit.mk
++++ b/libreofficekit/Module_libreofficekit.mk
+@@ -23,12 +23,10 @@ $(eval $(call gb_Module_add_check_targets,libreofficekit, \
+ ifneq ($(ENABLE_GTK3),)
+ $(eval $(call gb_Module_add_targets,libreofficekit,\
+ Library_libreofficekitgtk \
+- Executable_gtktiledviewer \
+ ))
+ endif # ($(ENABLE_GTK3),)
+
+ $(eval $(call gb_Module_add_targets,libreofficekit,\
+- Executable_tilebench \
+ Package_selectionhandles \
+ UIConfig_libreofficekit \
+ ))
--- /dev/null
+--- a/configure.ac-old 2018-11-12 06:51:15.504128408 +0100
++++ b/configure.ac 2018-11-12 06:52:32.427358015 +0100
+@@ -6898,6 +6898,7 @@
+
+ # set to limit VM usage for JunitTests
+ JAVAIFLAGS=-Xmx64M
++ JAVAIFLAGS="$JAVAIFLAGS -Djdk.net.URLClassPath.disableClassPathURLCheck=true"
+ # set to limit VM usage for javac
+ JAVAFLAGS=-J-Xmx128M
+
+From 905c107cde4a0a7059b1e11b5f23a0a59188cb0c Mon Sep 17 00:00:00 2001
+From: Jan-Marek Glogowski <glogow@fbihome.de>
+Date: Thu, 6 Dec 2018 13:26:48 +0000
+Subject: tdf#121925 test for URLClassPath.ClassPathURLCheck
+
+Adds a configure test to check for the enabled ClassPathURLCheck.
+Should be reverted, if our jars pass it.
+
+Change-Id: I040b41f329ccae21b92118fd58270682e50e95c1
+Reviewed-on: https://gerrit.libreoffice.org/64709
+Tested-by: Jenkins
+Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
+---
+ configure.ac | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 52 insertions(+)
+
+diff --git a/configure.ac b/configure.ac
+index 4dc6274..97836e1 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -7308,6 +7308,58 @@ if test -n "$ENABLE_JAVA" -a -z "$JAVAINC"; then
+ fi
+ SOLARINC="$SOLARINC $JAVAINC"
+
++if test "$ENABLE_JAVA" != "" -a "x" != "x$JAVACOMPILER"; then
++ url_check_unknown=0
++ java_base="testurlcheck"
++ java_src="${java_base}.java"
++ java_cls="${java_base}.class"
++ cat > "${java_src}" <<_ACEOF
++[import jdk.internal.loader.URLClassPath;
++import java.lang.reflect.Field;
++import java.net.URL;
++
++class ${java_base}
++{
++ public static void main(String args[])
++ {
++ try {
++ URLClassPath cp = new URLClassPath(new URL[0], null);
++ Field field = cp.getClass().getDeclaredField("DISABLE_CP_URL_CHECK");
++ field.setAccessible(true);
++ System.out.println(field.get(cp).toString());
++ } catch(Exception e) {
++ System.out.println("unknown");
++ }
++ }
++}]
++_ACEOF
++ AC_MSG_CHECKING([if jdk.net.URLClassPath.ClassPathURLCheck is disabled])
++ java_cmd="$JAVACOMPILER --add-exports java.base/jdk.internal.loader=ALL-UNNAMED ${java_src} 1>&2"
++ AC_TRY_EVAL(java_cmd)
++ if test $? = 0 -a -f "./${java_cls}"; then
++ java_res=`$JAVAINTERPRETER --add-opens java.base/jdk.internal.loader=ALL-UNNAMED ${java_base} 2>/dev/null`
++ if test $? = 0; then
++ case "${java_res}" in
++ true) AC_MSG_RESULT([yes]) ;;
++ false)
++ rm -f "./${java_src}" "./${java_cls}"
++ AC_MSG_ERROR([no - Java unit tests will break!])
++ ;;
++ *) url_check_unknown=1 ;;
++ esac
++ else
++ url_check_unknown=1
++ fi
++ else
++ url_check_unknown=1
++ fi
++ if test $url_check_unknown -eq 1; then
++ AC_MSG_RESULT([unknown - assuming yes])
++ add_warning "Unable to find the default value for jdk.net.URLClassPath.ClassPathURLCheck - java tests might fail!"
++ fi
++ rm -f "./${java_src}" "./${java_cls}"
++fi
++
+ AC_SUBST(JAVACOMPILER)
+ AC_SUBST(JAVADOC)
+ AC_SUBST(JAVAINTERPRETER)
+--
+cgit v1.1
+
--- /dev/null
+diff --git a/odk/build-examples_common.mk b/odk/build-examples_common.mk
+index 931d6eea856e..5ea56e959bfc 100644
+--- a/odk/build-examples_common.mk
++++ b/odk/build-examples_common.mk
+@@ -32,11 +32,7 @@ endif
+ && (cd $(INSTDIR)/$(SDKDIRNAME)/examples/$(my_dir) \
+ && printf 'yes\n' | LC_ALL=C make \
+ $(if $(filter MACOSX,$(OS)), SHELL=$(ODK_BUILD_SHELL), )))) \
+- >$(call gb_CustomTarget_get_workdir,$(1))/log 2>&1 \
+- || (RET=$$$$? \
+- $(if $(filter MACOSX,$(OS)), && rm -f $(ODK_BUILD_SHELL) , ) \
+- && cat $(call gb_CustomTarget_get_workdir,$(1))/log \
+- && exit $$$$RET)
++ 2>&1
+ ifeq (MACOSX,$(OS))
+ -rm -f $(ODK_BUILD_SHELL)
+ endif
+diff --git a/solenv/gbuild/CppunitTest.mk b/solenv/gbuild/CppunitTest.mk
+index 45af5c9b25a7..7933fc84c8b2 100644
+--- a/solenv/gbuild/CppunitTest.mk
++++ b/solenv/gbuild/CppunitTest.mk
+@@ -139,12 +139,7 @@ else
+ ; RET=$$? && $(gb_CppunitTest_POSTGDBTRACE) && (exit $$RET)) \
+ $(if $(gb_CppunitTest_localized),|| exit $$?; done) \
+ ) \
+- $(if $(gb_CppunitTest__interactive),, \
+- > $@.log 2>&1 \
+- || ($(if $(value gb_CppunitTest_postprocess), \
+- RET=$$?; \
+- $(call gb_CppunitTest_postprocess,$(gb_CppunitTest_CPPTESTCOMMAND),$@.core,$$RET) >> $@.log 2>&1;) \
+- cat $@.log; $(gb_CppunitTest_UNITTESTFAILED) Cppunit $*)))
++ 2>&1)
+ endif
+
+ define gb_CppunitTest_CppunitTest
+diff --git a/solenv/gbuild/JunitTest.mk b/solenv/gbuild/JunitTest.mk
+index 36f29b50ef28..3ac4603ff6a0 100644
+--- a/solenv/gbuild/JunitTest.mk
++++ b/solenv/gbuild/JunitTest.mk
+@@ -44,17 +44,7 @@ else
+ -classpath "$(T_CP)" \
+ $(DEFS) \
+ org.junit.runner.JUnitCore \
+- $(CLASSES) > $@.log 2>&1 || \
+- (cat $@.log \
+- && echo "to rerun just this failed test without all others, run:" \
+- && echo && echo " make JunitTest_$*" && echo \
+- && echo "cd into the module dir to run the tests faster" \
+- && echo "Or to do interactive debugging, run two shells with:" \
+- && echo \
+- && echo " make debugrun" \
+- && echo " make gb_JunitTest_DEBUGRUN=T JunitTest_$*" \
+- && echo \
+- && false)))
++ $(CLASSES) 2>&1))
+ $(CLEAN_CMD)
+ endif
+
+diff --git a/solenv/gbuild/UITest.mk b/solenv/gbuild/UITest.mk
+index 03d30448ef7b..5628e47866f8 100644
+--- a/solenv/gbuild/UITest.mk
++++ b/solenv/gbuild/UITest.mk
+@@ -77,16 +77,7 @@ else
+ --userdir=$(call gb_Helper_make_url,$(dir $(call gb_UITest_get_target,$*))user) \
+ --dir=$(strip $(MODULES)) \
+ $(gb_UITest_GDBTRACE) \
+- $(if $(gb_UITest__interactive),, \
+- > $@.log 2>&1 \
+- || ($(if $(value gb_CppunitTest_postprocess), \
+- RET=$$?; \
+- $(call gb_CppunitTest_postprocess,$(gb_UITest_EXECUTABLE_GDB),$@.core,$$RET) >> $@.log 2>&1;) \
+- $(if $(filter WNT,$(OS)), \
+- printf '%s: <<<\n' $(dir $(call gb_UITest_get_target,$*))/soffice.out.log; \
+- cat $(dir $(call gb_UITest_get_target,$*))/soffice.out.log; \
+- printf ' >>>\n\n';) \
+- cat $@.log; $(gb_UITest_UNITTESTFAILED) UI $*))))
++ 2>&1))
+ endif
+
+ # always use udkapi and URE services
+diff --git a/solenv/gbuild/PythonTest.mk b/solenv/gbuild/PythonTest.mk
+index 9b0590e35d2a..3a1d7d9caceb 100644
+--- a/solenv/gbuild/PythonTest.mk
++++ b/solenv/gbuild/PythonTest.mk
+@@ -58,12 +58,7 @@ else
+ $(gb_CppunitTest_GDBTRACE) $(gb_CppunitTest_VALGRINDTOOL) \
+ $(gb_PythonTest_COMMAND) \
+ $(if $(PYTHON_TEST_NAME),$(PYTHON_TEST_NAME),$(MODULES)) \
+- $(if $(gb_CppunitTest__interactive),, \
+- > $@.log 2>&1 \
+- || ($(if $(value gb_CppunitTest_postprocess), \
+- RET=$$?; \
+- $(call gb_CppunitTest_postprocess,$(gb_PythonTest_EXECUTABLE_GDB),$@.core,$$RET) >> $@.log 2>&1;) \
+- cat $@.log; $(gb_PythonTest_UNITTESTFAILED) Python $*))))
++ 2>&1))
+ endif
+
+ # always use udkapi and URE services
+
--- /dev/null
+18:43 <@_rene_> hmm. /me wonders why after a rm config.status autogen.lastrun
+ and a re-configure (and make clean for odk/scp2/scripting) LO
+ master tries to rebuild offapi/udkapi again?
+18:44 <@_rene_> this a) takes with cpp instead of ucpp and b) causes all kind
+ of stuff "down" to be rebuilt.... :(
+18:44 <@_rene_> which is extremely bad.
+18:44 <@_rene_> if it isn't solvable easily: what to touch to prevent it from
+ doing that? :-)
+18:45 < loirkerbot> LibreOffice (core) mstahl * desktop/source/app/main.c:
+ desktop: tweak xmlCleanupParser hack: disable on return
+ from main
+18:46 < mst__> _rene_, did you switch between --with-system-ucpp and without?
+ that should rebuild IDL file...
+18:47 <@_rene_> nah, first run is just --disable-help, --disable-scripting etc
+18:47 <@_rene_> and the second run does that
+18:47 <@_rene_> (first pass to "just" build what is needed for arch-specific
+ stuff)
+18:48 <@_rene_> (and I am not using ucpp at all, but cpp ;))
+18:51 < mst__> _rene_, hmm don't know why that would happen then... you could
+ try running second make with -d and redirect to a file, but
+ beware that file will be huge... then grep for "Must
+ remake.*urd" or something should give you the problem area
+18:59 -!- reisi007 [~chatzilla@cpe90-146-226-33.liwest.at] has quit [Quit:
+ ChatZilla 0.9.89 [Firefox 14.0.1/20120713134347]]
+19:00 -!- crossmanith_ [~cr@p3E9EAEF6.dip.t-dialin.net] has joined
+ #libreoffice-dev
+19:00 -!- erAck_away is now known as erAck
+19:05 -!- cbosdonnat [~cbosdo@ALyon-651-1-309-127.w90-14.abo.wanadoo.fr] has
+ quit [Quit: Leaving]
+19:07 <@_rene_> mst__: ok, starting a new build, let's see
+[...]
+10:36 <@_rene_> mst__: nothing interesting there instead of the loads of
+ touch'es...
+10:36 <@_rene_> mst__: butI just removed the touch from the UnoApiTarget and
+ let's see now :)
+10:36 -!- erAck [~erathke@f054050047.adsl.alicedsl.de] has joined
+ #libreoffice-dev
+10:36 -!- mode/#libreoffice-dev [+o erAck] by ChanServ
+10:36 <@_rene_> $(call gb_UnoApiPartTarget_get_target,%.urd) :
+10:36 <@_rene_> - touch $@
+10:36 <@_rene_> +
+[...]
+10:38 < mst__> _rene_, there must be something interesting there: preceding the
+ "Must remake.*urd" line there must be some line that says target
+ "foo" is "newer" than the .urd and therefor it will be rebuilt
+[...]
+10:40 <@_rene_> mst__: I didn't see anything there, no ".*urd*muss neu"
+10:41 < mst__> _rene_, there must be a message like that immediately preceding
+ running the touch command
+10:41 -!- pepp [~pierre-er@vaf26-6-78-248-2-61.fbx.proxad.net] has joined
+ #libreoffice-dev
+10:42 <@vmiklos> mst__: makes sense.
+10:42 -!- matus [~ubuntu@adsl-dyn17.78-98-107.t-com.sk] has joined
+ #libreoffice-dev
+10:42 <@_rene_> as said, there was done. I don't think I oversaw it
+10:43 <@_rene_> but can try again later, for now I will just keep removing the
+ touch. according to the comment this shoudln't do harm
+10:43 < mst__> _rene_, removing it will break incremental builds iirc
+10:44 <@_rene_> but only if you change idl stuff inbetween
+10:44 <@_rene_> which won't happen that often in package builds ;)
+10:44 < mst__> _rene_, exactly
+10:44 -!- Fridrich [~fridrich@71-99.199-178.cust.bluewin.ch] has joined
+ #libreoffice-dev
+10:44 -!- mode/#libreoffice-dev [+o Fridrich] by ChanServ
+10:45 <@_rene_> (when I am out of "use git", only when there's a new
+ (pre-)release"
+
+diff --git a/solenv/gbuild/UnoApiTarget.mk b/solenv/gbuild/UnoApiTarget.mk
+index 98734ab..b281a84 100644
+--- a/solenv/gbuild/UnoApiTarget.mk
++++ b/solenv/gbuild/UnoApiTarget.mk
+@@ -46,7 +46,7 @@ $(dir $(call gb_UnoApiPartTarget_get_target,))%/.dir :
+ $(if $(wildcard $(dir $@)),,mkdir -p $(dir $@))
+
+ $(call gb_UnoApiPartTarget_get_target,%.urd) :
+- touch $@
++
+
+ # TODO:
+ # - get idlc switch "-P" (generate .urd into package dir)
--- /dev/null
+From 70d022f6f134e67ffa9e65ca2a6de64e458a7db0 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Caol=C3=A1n=20McNamara?= <caolanm@redhat.com>
+Date: Tue, 23 Jul 2019 15:31:05 +0100
+Subject: expand LibreLogo check to global events
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Change-Id: I7f436983ba0eb4b76b02d08ee52626e54b103d5f
+Reviewed-on: https://gerrit.libreoffice.org/76194
+Tested-by: Jenkins
+Reviewed-by: Michael Stahl <Michael.Stahl@cib.de>
+Reviewed-by: Caolán McNamara <caolanm@redhat.com>
+Tested-by: Caolán McNamara <caolanm@redhat.com>
+(cherry picked from commit 85cbe1f06703c0b8e1f15a3d969202d99c66f34b)
+Reviewed-on: https://gerrit.libreoffice.org/76540
+Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
+Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
+Tested-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
+---
+ include/sfx2/objsh.hxx | 2 ++
+ sfx2/source/doc/objmisc.cxx | 6 +-----
+ sfx2/source/notify/eventsupplier.cxx | 18 ++++++++++++------
+ 3 files changed, 15 insertions(+), 11 deletions(-)
+
+diff --git a/include/sfx2/objsh.hxx b/include/sfx2/objsh.hxx
+index eaa93af..d982aa1 100644
+--- a/include/sfx2/objsh.hxx
++++ b/include/sfx2/objsh.hxx
+@@ -392,6 +392,8 @@ public:
+ */
+ bool AdjustMacroMode();
+
++ static bool UnTrustedScript(const OUString& rScriptURL);
++
+ SvKeyValueIterator* GetHeaderAttributes();
+ void ClearHeaderAttributesForSourceViewHack();
+ void SetHeaderAttributesForSourceViewHack();
+diff --git a/sfx2/source/doc/objmisc.cxx b/sfx2/source/doc/objmisc.cxx
+index d44b55e..0e188b9 100644
+--- a/sfx2/source/doc/objmisc.cxx
++++ b/sfx2/source/doc/objmisc.cxx
+@@ -1344,16 +1344,12 @@ namespace
+ }
+ }
+
+-namespace {
+-
+ // don't allow LibreLogo to be used with our mouseover/etc dom-alike events
+-bool UnTrustedScript(const OUString& rScriptURL)
++bool SfxObjectShell::UnTrustedScript(const OUString& rScriptURL)
+ {
+ return rScriptURL.startsWithIgnoreAsciiCase("vnd.sun.star.script:LibreLogo");
+ }
+
+-}
+-
+ ErrCode SfxObjectShell::CallXScript( const Reference< XInterface >& _rxScriptContext, const OUString& _rScriptURL,
+ const Sequence< Any >& aParams, Any& aRet, Sequence< sal_Int16 >& aOutParamIndex, Sequence< Any >& aOutParam, bool bRaiseError, const css::uno::Any* pCaller )
+ {
+diff --git a/sfx2/source/notify/eventsupplier.cxx b/sfx2/source/notify/eventsupplier.cxx
+index 78667a1d8036..2656e9c213ec 100644
+--- a/sfx2/source/notify/eventsupplier.cxx
++++ b/sfx2/source/notify/eventsupplier.cxx
+@@ -207,18 +207,24 @@ void SfxEvents_Impl::Execute( uno::Any const & aEventData, const document::Docum
+ else if (aType == "Service" ||
+ aType == "Script")
+ {
+- if ( !aScript.isEmpty() )
++ bool bAllowed = false;
++ util::URL aURL;
++ if (!aScript.isEmpty())
+ {
+- SfxViewFrame* pView = pDoc ?
+- SfxViewFrame::GetFirst( pDoc ) :
+- SfxViewFrame::Current();
+-
+ uno::Reference < util::XURLTransformer > xTrans( util::URLTransformer::create( ::comphelper::getProcessComponentContext() ) );
+
+- util::URL aURL;
+ aURL.Complete = aScript;
+ xTrans->parseStrict( aURL );
+
++ bAllowed = !SfxObjectShell::UnTrustedScript(aURL.Complete);
++ }
++
++ if (bAllowed)
++ {
++ SfxViewFrame* pView = pDoc ?
++ SfxViewFrame::GetFirst( pDoc ) :
++ SfxViewFrame::Current();
++
+ uno::Reference
+ < frame::XDispatchProvider > xProv;
+
--- /dev/null
+From 4478218df5c4af87c8d242b296bf085e432353b3 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Caol=C3=A1n=20McNamara?= <caolanm@redhat.com>
+Date: Wed, 7 Aug 2019 12:58:01 +0100
+Subject: expand pyuno path separators
+
+Change-Id: Ic97649ed6d4be595b308922c7bdc880cbb60b239
+Reviewed-on: https://gerrit.libreoffice.org/77102
+Reviewed-by: Michael Stahl <Michael.Stahl@cib.de>
+Tested-by: Jenkins
+Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
+(cherry picked from commit 75903a0298218f89a199a5ac151ee0166f4469d7)
+Reviewed-on: https://gerrit.libreoffice.org/77116
+---
+ sfx2/source/doc/objmisc.cxx | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/sfx2/source/doc/objmisc.cxx b/sfx2/source/doc/objmisc.cxx
+index e999557..ab41b14 100644
+--- a/sfx2/source/doc/objmisc.cxx
++++ b/sfx2/source/doc/objmisc.cxx
+@@ -1360,7 +1360,8 @@ bool SfxObjectShell::UnTrustedScript(const OUString& rScriptURL)
+ if (!sfUri.is())
+ return false;
+
+- OUString sScript = sfUri->getName();
++ // pyuno encodes path separator as |
++ OUString sScript = sfUri->getName().replace('|', '/');
+
+ // check if any path portion matches LibreLogo and ban it if it does
+ sal_Int32 nIndex = 0;
+--
+cgit v1.1
+
--- /dev/null
+diff --git a/sfx2/source/doc/objmisc.cxx b/sfx2/source/doc/objmisc.cxx
+index 2ece4b9a6e6c..d44b55e6b753 100644
+--- a/sfx2/source/doc/objmisc.cxx
++++ b/sfx2/source/doc/objmisc.cxx
+@@ -1344,6 +1344,16 @@ namespace
+ }
+ }
+
++namespace {
++
++// don't allow LibreLogo to be used with our mouseover/etc dom-alike events
++bool UnTrustedScript(const OUString& rScriptURL)
++{
++ return rScriptURL.startsWithIgnoreAsciiCase("vnd.sun.star.script:LibreLogo");
++}
++
++}
++
+ ErrCode SfxObjectShell::CallXScript( const Reference< XInterface >& _rxScriptContext, const OUString& _rScriptURL,
+ const Sequence< Any >& aParams, Any& aRet, Sequence< sal_Int16 >& aOutParamIndex, Sequence< Any >& aOutParam, bool bRaiseError, const css::uno::Any* pCaller )
+ {
+@@ -1356,6 +1366,9 @@ ErrCode SfxObjectShell::CallXScript( const Reference< XInterface >& _rxScriptCon
+ if ( bIsDocumentScript && !lcl_isScriptAccessAllowed_nothrow( _rxScriptContext ) )
+ return ERRCODE_IO_ACCESSDENIED;
+
++ if ( UnTrustedScript(_rScriptURL) )
++ return ERRCODE_IO_ACCESSDENIED;
++
+ bool bCaughtException = false;
+ Any aException;
+ try
--- /dev/null
+diff -urN hsqldb.old/patches/use-system-servlet-api.jar.diff hsqldb/patches/use-system-servlet-api.jar.diff
+--- a/external/hsqldb/patches/use-system-servlet-api.jar.diff 1970-01-01 01:00:00.000000000 +0100
++++ b/external/hsqldb/patches/use-system-servlet-api.jar.diff 2013-03-19 15:09:42.137801521 +0100
+@@ -0,0 +1,29 @@
++--- misc/hsqldb/build/build.xml
+++++ misc/build/hsqldb/build/build.xml
++@@ -356,7 +356,7 @@
++ optimize="${build.optimize}"
++ >
++ <classpath>
++- <pathelement location="lib/servlet.jar"/>
+++ <pathelement location="/usr/share/java/servlet-api-3.1.jar"/>
++ </classpath>
++ <include name="*.java"/>
++ <include name="org/hsqldb/*.java"/>
++@@ -818,7 +818,7 @@
++ ${src}/org/hsqldb/util/RCData.java,
++ ${src}/org/hsqldb/util/SqlTool.java"
++ destdir="${basedir}/doc/src"
++- classpath="${basedir}/lib/servlet.jar;${basedir}/lib/junit.jar"
+++ classpath="/usr/share/java/servlet-api-3.1.jar;${basedir}/lib/junit.jar"
++ author="true"
++ version="false"
++ use="true"
++@@ -839,7 +839,7 @@
++ <javadoc packagenames="org.hsqldb.*,org.hsqldb.jdbc.*,org.hsqldb.lib.*,org.hsqldb.util.*"
++ sourcepath="${src}"
++ destdir="${basedir}/doc/src"
++- classpath="${basedir}/lib/servlet.jar;${basedir}/lib/junit.jar"
+++ classpath="/usr/share/java/servlet-api-3.1.jar;${basedir}/lib/junit.jar"
++ author="true"
++ version="false"
++ use="true"
+diff --git a/external/hsqldb/UnpackedTarball_hsqldb.mk b/external/hsqldb/UnpackedTarball_hsqldb.mk
+index fc6c18f77c23..e3d553a51236 100644
+--- a/external/hsqldb/UnpackedTarball_hsqldb.mk
++++ b/external/hsqldb/UnpackedTarball_hsqldb.mk
+@@ -28,6 +28,7 @@ $(eval $(call gb_UnpackedTarball_add_patches,hsqldb,\
+ external/hsqldb/patches/jdbc-4.1.patch \
+ external/hsqldb/patches/multipleResultSets.patch \
+ ) \
++ external/hsqldb/patches/use-system-servlet-api.jar.diff \
+ ))
+
+ # vim: set noet sw=4 ts=4:
--- /dev/null
+diff --git a/RepositoryExternal.mk b/RepositoryExternal.mk
+index 16eb38a..8983376 100644
+--- a/RepositoryExternal.mk
++++ b/RepositoryExternal.mk
+@@ -2392,7 +2392,7 @@ ifneq ($(ENABLE_LPSOLVE),)
+ ifneq ($(SYSTEM_LPSOLVE),)
+
+ define gb_LinkTarget__use_lpsolve
+-$(call gb_LinkTarget_add_libs,$(1),-llpsolve55)
++$(call gb_LinkTarget_add_ldflags,$(1),-llpsolve55_pic)
+ $(call gb_LinkTarget_add_defs,$(1),\
+ -DSYSTEM_LPSOLVE \
+ )
+diff --git a/configure.ac b/configure.ac
+index df7cb4c..9eb5bad 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -9790,10 +9812,11 @@ if test "$ENABLE_LPSOLVE" = TRUE; then
+ # some systems need this. Like Ubuntu....
+ AC_CHECK_LIB(m, floor)
+ AC_CHECK_LIB(dl, dlopen)
+- AC_CHECK_LIB([lpsolve55], [make_lp], [:],
++ AC_CHECK_LIB(colamd, colamd)
++ AC_CHECK_LIB([lpsolve55_pic], [make_lp], [:],
+ [ AC_MSG_ERROR(lpsolve library not found or too old.)], [])
+ LIBS=$save_LIBS
+- libo_MINGW_CHECK_DLL([lpsolve55])
++ libo_MINGW_CHECK_DLL([lpsolve55_pic])
+ else
+ AC_MSG_RESULT([internal])
+ SYSTEM_LPSOLVE=
--- /dev/null
+From 21ba68ae7991ee0f6546d765dcad2c84cd05a375 Mon Sep 17 00:00:00 2001
+From: Stephan Bergmann <sbergman@redhat.com>
+Date: Sat, 20 Oct 2018 14:38:35 +0200
+Subject: Java 11 no longer synthesizes DocumentView$1.class
+
+...so, for simplicity, just include whatever generated DocumentView$*.class by
+wildcard
+
+Change-Id: I779e2709c8ef2859d68233300302dd62dbe2455f
+Reviewed-on: https://gerrit.libreoffice.org/62073
+Tested-by: Jenkins
+Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
+---
+ odk/examples/DevelopersGuide/OfficeDev/DesktopEnvironment/Makefile | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/odk/examples/DevelopersGuide/OfficeDev/DesktopEnvironment/Makefile b/odk/examples/DevelopersGuide/OfficeDev/DesktopEnvironment/Makefile
+index 4227108..2048ade 100644
+--- a/odk/examples/DevelopersGuide/OfficeDev/DesktopEnvironment/Makefile
++++ b/odk/examples/DevelopersGuide/OfficeDev/DesktopEnvironment/Makefile
+@@ -66,8 +66,7 @@ APP1_JAVAFILES = \
+ APP1_CLASSFILES = $(patsubst %.java,$(OUT_APP_CLASS)/%.class,$(APP1_JAVAFILES))
+ APP1_CLASSNAMES = $(patsubst %.java,%.class,$(APP1_JAVAFILES)) \
+ CustomizeView$(QUOTE)$$ClickListener.class \
+- DocumentView$(QUOTE)$$1.class \
+- DocumentView$(QUOTE)$$Reactor.class
++ DocumentView$(QUOTE)$$*.class
+
+
+ SDK_CLASSPATH = $(subst $(EMPTYSTRING) $(PATH_SEPARATOR),$(PATH_SEPARATOR),$(CLASSPATH)\
+--
+cgit v1.1
+
--- /dev/null
+diff --git a/include/sfx2/strings.hrc b/include/sfx2/strings.hrc
+index 1b0ea6ccb2ff..630f4330552a 100644
+--- a/include/sfx2/strings.hrc
++++ b/include/sfx2/strings.hrc
+@@ -132,7 +132,7 @@
+ #define STR_GID_CONTROLS NC_("STR_GID_CONTROLS", "Controls")
+ #define STR_QUITAPP NC_("STR_QUITAPP", "E~xit %PRODUCTNAME")
+ #define RID_STR_HELP NC_("RID_STR_HELP", "Help")
+-#define RID_STR_HLPFILENOTEXIST NC_("RID_STR_HLPFILENOTEXIST", "The help file for this topic is not installed.")
++#define RID_STR_HLPFILENOTEXIST NC_("RID_STR_HLPFILENOTEXIST", "The help file for this topic is not installed. Please install the libreoffice-help-en-us package or the locale specific help package libreoffice-help-<language-code>.")
+ #define STR_QUICKSTART_EXIT NC_("STR_QUICKSTART_EXIT", "Exit Quickstarter")
+ #define STR_QUICKSTART_TIP NC_("STR_QUICKSTART_TIP", "%PRODUCTNAME %PRODUCTVERSION Quickstarter")
+ #define STR_QUICKSTART_FILEOPEN NC_("STR_QUICKSTART_FILEOPEN", "Open Document...")
--- /dev/null
+Description: Hide startcenter and math from the shell
+Author: Olivier Tilloy <olivier.tilloy@canonical.com>
+Bug-Ubuntu: https://launchpad.net/bugs/1696250
+Forwarded: not-needed
+
+--- a/sysui/desktop/menus/math.desktop
++++ b/sysui/desktop/menus/math.desktop
+@@ -33,6 +33,7 @@ Keywords=Equation;OpenDocument Formula;F
+ InitialPreference=5
+ StartupWMClass=libreoffice-math
+ X-KDE-Protocols=file,http,ftp,webdav,webdavs
++NotShowIn=GNOME;
+
+ Actions=NewDocument;
+ [Desktop Action NewDocument]
--- /dev/null
+diff --git a/configure.ac b/configure.ac
+index 42dc3b4..f5a51c9 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -6671,7 +6671,7 @@ if test "$ENABLE_JAVA" != ""; then
+ JAVAINTERPRETER=`win_short_path_for_make "$JAVAINTERPRETER"`
+ elif test "$cross_compiling" != "yes"; then
+ case $CPUNAME in
+- AARCH64|AXP|X86_64|HPPA|IA64|POWERPC64|S390X|SPARC64|GODSON64)
++ AARCH64|AXP|X86_64|IA64|POWERPC64|S390X|SPARC64|GODSON64)
+ if test -f "$JAVAINTERPRETER" -a "`$JAVAINTERPRETER -version 2>&1 | $GREP -i 64-bit`" = "" >/dev/null; then
+ AC_MSG_WARN([You are building 64-bit binaries but the JDK $JAVAINTERPRETER is 32-bit])
+ AC_MSG_ERROR([You should pass the --with-jdk-home option pointing to a 64-bit JDK])
--- /dev/null
+diff --git a/bin/distro-install-file-lists b/bin/distro-install-file-lists
+index eaabf9c..c1b1ec6 100755
+--- libreoffice-3.5.0/bin/distro-install-file-lists
++++ libreoffice-3.5.0/bin/distro-install-file-lists
+@@ -8,6 +8,8 @@
+ exit 1
+ fi
+
++export OOO_VENDOR=Debian
++
+ BUILDDIR=`pwd`
+ FILELISTSDIR="$BUILDDIR/file-lists"
+
+@@ -351,152 +351,6 @@ if test "z$OOO_VENDOR" != "zDebian" ; then
+ remove_duplicity_from_flists common_list.txt lang_bg_list.txt $INSTALLDIR/presets/config/styles.sod
+ # the British fixes can be removed after the issue #54113 is fixed
+ remove_duplicity_from_flists common_list.txt lang_en-GB_list.txt $INSTALLDIR/presets/config/standard.sog
+-
+-else
+-
+- echo "Creating package directories..."
+-
+- test -d pkg && rm -r pkg || :
+-
+- # Create package tree (needed by Debian's dpkg)
+- # create_package_directory <list_file> <directory_name>
+- create_package_directory()
+- {
+- listfile=$1
+- directory="$2"
+- perl -nl \
+- -e " if(/^%dir (.*)/)
+- {system('mkdir', '-p', '-m', '755', \"$directory\".\$1);}
+- else
+- {rename('./'.\$_, \"$directory\".\$_);}
+- " \
+- $listfile
+- }
+-
+- create_package_directory gid_Module_Root_Ure_Hidden pkg/ure
+-
+- create_package_directory gid_Module_Root pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Brand pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Files_Images pkg/libreoffice-common
+- create_package_directory gid_Module_Oo_Linguistic pkg/libreoffice-common
+- create_package_directory gid_Module_Optional_Xsltfiltersamples pkg/libreoffice-common
+- create_package_directory gid_Module_Optional_Grfflt pkg/libreoffice-draw
+- create_package_directory gid_Module_Prg_Calc_Bin pkg/libreoffice-calc
+- create_package_directory gid_Module_Prg_Math_Bin pkg/libreoffice-math
+- create_package_directory gid_Module_Prg_Draw_Bin pkg/libreoffice-draw
+- create_package_directory gid_Module_Prg_Wrt_Bin pkg/libreoffice-writer
+- create_package_directory gid_Module_Prg_Impress_Bin pkg/libreoffice-impress
+- create_package_directory gid_Module_Prg_Base_Bin pkg/libreoffice-base
+- create_package_directory gid_Module_Brand_Prg_Calc pkg/libreoffice-calc
+- create_package_directory gid_Module_Brand_Prg_Math pkg/libreoffice-math
+- create_package_directory gid_Module_Brand_Prg_Draw pkg/libreoffice-draw
+- create_package_directory gid_Module_Brand_Prg_Wrt pkg/libreoffice-writer
+- create_package_directory gid_Module_Brand_Prg_Impress pkg/libreoffice-impress
+- create_package_directory gid_Module_Brand_Prg_Base pkg/libreoffice-base
+- create_package_directory gid_Module_Pyuno pkg/python-uno
+- create_package_directory gid_Module_Optional_Gnome pkg/libreoffice-gnome
+-
+- create_package_directory gid_Module_Root_Files_2 pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Files_3 pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Files_4 pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Files_5 pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Files_6 pkg/libreoffice-common
+- create_package_directory gid_Module_Root_Files_7 pkg/libreoffice-common
+- if [ -e gid_Module_Optional_Pymailmerge ]; then
+- create_package_directory gid_Module_Optional_Pymailmerge pkg/libreoffice-emailmerge
+- else # post m26
+- mkdir -p pkg/libreoffice-emailmerge/$INSTALLDIR/program
+- mv pkg/libreoffice-common/$INSTALLDIR/program/mailmerge.py \
+- pkg/libreoffice-emailmerge/$INSTALLDIR/program/mailmerge.py
+- fi
+- create_package_directory gid_Module_Optional_OGLTrans pkg/libreoffice-ogltrans
+-
+- create_package_directory gid_Module_Root_SDK pkg/libreoffice-dev
+-
+- for l in `echo $WITH_LANG_LIST`; do
+- for p in Impress Draw Math Calc Base Writer; do
+- create_package_directory gid_Module_Langpack_${p}_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+- done
+- create_package_directory gid_Module_Langpack_Basis_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+- create_package_directory gid_Module_Langpack_Brand_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+- create_package_directory gid_Module_Langpack_Resource_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+- create_package_directory gid_Module_Helppack_Help_`echo $l | sed -e s/-/_/g` pkg/libreoffice-help-$l
+-
+- # some help files are in _Langpack_{Writer,Impress,...}_<lang>
+- # move them from -l10n to -help
+- if [ "$l" = "en-US" ]; then d=en; else d=$l; fi
+- mv pkg/libreoffice-l10n-$l/$INSTALLDIR/help/$d/* \
+- pkg/libreoffice-help-$l/$INSTALLDIR/help/$d && \
+- rmdir pkg/libreoffice-l10n-$l/$INSTALLDIR/help/$d
+- done
+-
+- # move_wrappers <directory_name> <name> [...]
+- move_wrappers()
+- {
+- directory=$1
+- shift
+- mkdir -m755 -p "$directory"/usr/bin
+- while test -n "$1"; do
+- mv usr/*bin/"$1$BINSUFFIX" "$directory"/usr/bin
+- shift
+- done
+- }
+- move_wrappers pkg/libreoffice-common soffice unopkg
+- if test "$COMPAT_OOWRAPPERS" = "YES" ; then
+- move_wrappers pkg/libreoffice-common ooffice oofromtemplate
+- move_wrappers pkg/libreoffice-base oobase
+- move_wrappers pkg/libreoffice-writer oowriter ooweb
+- move_wrappers pkg/libreoffice-calc oocalc
+- move_wrappers pkg/libreoffice-impress ooimpress
+- move_wrappers pkg/libreoffice-math oomath
+- move_wrappers pkg/libreoffice-draw oodraw
+- fi
+- move_wrappers pkg/libreoffice-common libreoffice lofromtemplate
+- move_wrappers pkg/libreoffice-base lobase
+- move_wrappers pkg/libreoffice-writer lowriter loweb
+- move_wrappers pkg/libreoffice-calc localc
+- move_wrappers pkg/libreoffice-impress loimpress
+- move_wrappers pkg/libreoffice-math lomath
+- move_wrappers pkg/libreoffice-draw lodraw
+-
+- # Move all libraries, binaries, *.rdb from -common to -core
+- for d in $INSTALLDIR/program $INSTALLDIR/program; do \
+- if [ ! -d $DESTDIR/pkg/libreoffice-core/$d ]; then \
+- mkdir -p $DESTDIR/pkg/libreoffice-core/$d; \
+- fi &&
+- ( cd pkg/libreoffice-common/$d
+- find -maxdepth 1 \
+- -regex '\./\(.*\.so.*\|.*\.bin\|pagein\|msfontextract\|.*\.rdb\|javaldx\|uri-encode\)' \
+- -exec mv {} $DESTDIR/pkg/libreoffice-core/$d \;
+- ); \
+- done
+-
+- # install additional ooo-build scripts & misc stuff
+- mkdir -p pkg/libreoffice-common/usr/share/man/man1
+- if test "$COMPAT_OOWRAPPERS" = "YES" ; then
+- mv usr/share/man/man1/openoffice$BINSUFFIX.1 \
+- pkg/libreoffice-common/usr/share/man/man1
+- fi
+- mv usr/share/man/man1/libreoffice$BINSUFFIX.1 \
+- pkg/libreoffice-common/usr/share/man/man1
+- mkdir -p pkg/libreoffice-common/etc/bash_completion.d
+- if test "$COMPAT_OOWRAPPERS" = "YES" ; then
+- mv etc/bash_completion.d/ooffice$BINSUFFIX.sh \
+- pkg/libreoffice-common/etc/bash_completion.d
+- fi
+- mv etc/bash_completion.d/libreoffice$BINSUFFIX.sh \
+- pkg/libreoffice-common/etc/bash_completion.d
+- mv .$INSTALLDIR/program/java-set-classpath \
+- pkg/libreoffice-common/$INSTALLDIR/program
+- if echo $WITH_LANG_LIST | grep -q en-US; then
+- for i in forms/resume.ott officorr/project-proposal.ott; do \
+- mkdir -p pkg/libreoffice-common/$INSTALLDIR/share/template/en-US/`dirname $i`; \
+- mv .$INSTALLDIR/share/template/en-US/$i \
+- pkg/libreoffice-common/$INSTALLDIR/share/template/en-US/$i; \
+- done; \
+- fi
+- # Warn for any remaining files
+- find . -path './pkg' -prune -o -not -name 'gid_Module_*' -not -type d -exec echo "File not packaged: {}" \;
+ fi
+
+ # mark the config files
--- /dev/null
+diff --git a/jvmfwk/distributions/OpenOfficeorg/javavendors_linux.xml b/jvmfwk/distributions/OpenOfficeorg/javavendors_linux.xml
+index b008bb1fc0f7..ea0ddc4e7c91 100644
+--- a/jvmfwk/distributions/OpenOfficeorg/javavendors_linux.xml
++++ b/jvmfwk/distributions/OpenOfficeorg/javavendors_linux.xml
+@@ -25,6 +25,9 @@
+ <vendor name="Oracle Corporation">
+ <minVersion>1.6.0</minVersion>
+ </vendor>
++ <vendor name="Debian">
++ <minVersion>1.6.0</minVersion>
++ </vendor>
+ <vendor name="IBM Corporation">
+ <minVersion>1.5.0</minVersion>
+ </vendor>
+diff --git a/jvmfwk/plugins/sunmajor/pluginlib/vendorlist.cxx b/jvmfwk/plugins/sunmajor/pluginlib/vendorlist.cxx
+index 60911f8a63ca..eaa26f441ad7 100644
+--- a/jvmfwk/plugins/sunmajor/pluginlib/vendorlist.cxx
++++ b/jvmfwk/plugins/sunmajor/pluginlib/vendorlist.cxx
+@@ -41,6 +41,7 @@
+ #endif
+ VENDOR_MAP_ENTRY("Sun Microsystems Inc.", SunInfo)
+ VENDOR_MAP_ENTRY("Oracle Corporation", SunInfo)
++ VENDOR_MAP_ENTRY("Debian", SunInfo)
+ VENDOR_MAP_ENTRY("AdoptOpenJdk", SunInfo)
+ #ifndef MACOSX
+ VENDOR_MAP_ENTRY("IBM Corporation", OtherInfo)
+diff --git a/bean/com/sun/star/comp/beans/LocalOfficeWindow.java b/bean/com/sun/star/comp/beans/LocalOfficeWindow.java
+index 67ace100fb5f..46cdb32fd276 100644
+--- a/bean/com/sun/star/comp/beans/LocalOfficeWindow.java
++++ b/bean/com/sun/star/comp/beans/LocalOfficeWindow.java
+@@ -250,7 +250,7 @@ public class LocalOfficeWindow
+ if (getNativeWindowSystemType() == SystemDependent.SYSTEM_XWINDOW )
+ {
+ String vendor = System.getProperty("java.vendor");
+- if ((vendor.equals("Sun Microsystems Inc.") || vendor.equals("Oracle Corporation"))
++ if ((vendor.equals("Sun Microsystems Inc.") || vendor.equals("Oracle Corporation") || vendor.equals("Debian"))
+ && Boolean.getBoolean("sun.awt.xembedserver"))
+ {
+ xembed = new NamedValue(
--- /dev/null
+Gemeinsame Unterverzeichnisse: odk-old/config und odk/config.
+Gemeinsame Unterverzeichnisse: odk-old/docs und odk/docs.
+Gemeinsame Unterverzeichnisse: odk-old/examples und odk/examples.
+diff --git a/odk/Module_odk.mk b/odk/Module_odk.mk
+index 32bdfc1..a174932 100644
+--- a/odk/Module_odk.mk
++++ b/odk/Module_odk.mk
+@@ -43,11 +43,13 @@ ifneq ($(ENABLE_JAVA),)
+ $(eval $(call gb_Module_add_targets,odk,\
+ $(if $(and $(BUILD_UNOWINREG),$(filter GCC,$(COM))),CustomTarget_unowinreg)\
+ CustomTarget_classes \
+- CustomTarget_javadoc \
+- GeneratedPackage_odk_javadoc \
+ GeneratedPackage_uno_loader_classes \
+ $(if $(filter WNT,$(OS)),Library_unowinreg) \
+ Package_unowinreg \
++ $(if $(JAVADOC),\
++ CustomTarget_javadoc \
++ GeneratedPackage_odk_javadoc \
++ ) \
+ ))
+ endif
+
+Gemeinsame Unterverzeichnisse: odk-old/pack und odk/pack.
+Gemeinsame Unterverzeichnisse: odk-old/qa und odk/qa.
+Gemeinsame Unterverzeichnisse: odk-old/settings und odk/settings.
+Gemeinsame Unterverzeichnisse: odk-old/source und odk/source.
+Gemeinsame Unterverzeichnisse: odk-old/util und odk/util.
+--- a/configure.ac-old 2013-05-27 18:32:42.187305241 +0200
++++ b/configure.ac 2013-05-27 18:44:29.131286710 +0200
+@@ -2057,6 +2057,18 @@ AC_ARG_WITH(doxygen,
+ documentation. Not relevant in the --disable-odk case.]),
+ ,with_doxygen=yes)
+
++AC_ARG_WITH(
++ [javadoc],
++ AS_HELP_STRING(
++ [--with-javadoc],
++ [Specifies the javadoc executable to use when generating ODK Java
++ documentation. --without-javadoc disables generation of ODK Java
++ documentation. Not relevant in the --disable-odk case.])
++ [
++ Usage: --with-javadoc=<absolute path to doxygen executable>
++ ],,
++ [with_javadoc=yes])
++
+ AC_ARG_WITH(visual-studio,
+ AS_HELP_STRING([--with-visual-studio=<2015/2017>],
+ [Specify which Visual Studio version to use in case several are
+@@ -6290,34 +6302,44 @@
+ dnl ===================================================================
+ dnl Checks for javadoc
+ dnl ===================================================================
+-if test "$ENABLE_JAVA" != ""; then
++if test "$ENABLE_JAVA" != "" -a "$enable_odk" != no; then
+ if test -z "$with_jdk_home"; then
+ AC_PATH_PROG(JAVADOC, javadoc)
+ else
+- _javadoc_path="$with_jdk_home/bin/javadoc"
+- dnl Check if there is a javadoc at all.
+- if test -x "$_javadoc_path"; then
+- JAVADOC=$_javadoc_path
+- else
+- AC_PATH_PROG(JAVADOC, javadoc)
+- fi
+- fi
+- if test -z "$JAVADOC"; then
+- AC_MSG_ERROR([$_javadoc_path not found set with_jdk_home])
+- fi
+- if test "$build_os" = "cygwin"; then
+- if test x`echo "$JAVADOC" | $GREP -i '\.exe$'` = x; then
+- JAVADOC="${JAVADOC}.exe"
+- fi
+- JAVADOC=`win_short_path_for_make "$JAVADOC"`
+- fi
++ if test "$with_javadoc" = "yes"; then
++ _javadoc_path="$with_jdk_home/bin/javadoc"
++ dnl Check if there is a javadoc at all.
++ if test -x "$_javadoc_path"; then
++ JAVADOC=$_javadoc_path
++ else
++ AC_PATH_PROG(JAVADOC, javadoc)
++ fi
++ if test -z "$JAVADOC"; then
++ AC_MSG_ERROR([$_javadoc_path not found set with_jdk_home])
++ fi
++ if test "$build_os" = "cygwin"; then
++ if test x`echo "$JAVADOC" | $GREP -i '\.exe$'` = x; then
++ JAVADOC="${JAVADOC}.exe"
++ fi
++ JAVADOC=`win_short_path_for_make "$JAVADOC"`
++ fi
+
+- if test `$JAVADOC --version 2>&1 | $GREP -c "gjdoc"` -gt 0; then
+- JAVADOCISGJDOC="yes"
++ if test `$JAVADOC --version 2>&1 | $GREP -c "gjdoc"` -gt 0; then
++ JAVADOCISGJDOC="yes"
++ fi
++ else
++ unset JAVADOC
++ fi
+ fi
++else
++ unset JAVADOC
+ fi
+ AC_SUBST(JAVADOCISGJDOC)
+
++if test "$JAVADOCISGJDOC" = "yes"; then
++ unset JAVADOC
++fi
++
+ if test "$ENABLE_JAVA" != ""; then
+ # check if JAVA_HOME was (maybe incorrectly?) set automatically to /usr
+ if test "$JAVA_HOME" = "/usr" -a "x$with_jdk_home" = "x"; then
+diff --git a/odk/CustomTarget_check.mk b/odk/CustomTarget_check.mk
+index a9b542d..707829a 100644
+--- a/odk/CustomTarget_check.mk
++++ b/odk/CustomTarget_check.mk
+@@ -35,7 +35,7 @@ $(call gb_CustomTarget_get_workdir,odk/check)/checkbin : \
+ $(if $(filter WNT,$(OS)),$(call gb_Package_get_target,odk_config_win)) \
+ $(call gb_Package_get_target,odk_docs) \
+ $(call gb_Package_get_target,odk_html) \
+- $(if $(ENABLE_JAVA),$(call gb_GeneratedPackage_get_target,odk_javadoc)) \
++ $(if $(JAVADOC),$(call gb_GeneratedPackage_get_target,odk_javadoc)) \
+ $(call gb_Package_get_target,odk_settings) \
+ $(call gb_Package_get_target,odk_settings_generated) \
+ $(if $(ENABLE_JAVA),$(call gb_Package_get_target,odk_unowinreg))
+diff --git a/odk/util/check.pl b/odk/util/check.pl
+index 899b42c..2c7a780 100644
+--- a/odk/util/check.pl
++++ b/odk/util/check.pl
+@@ -188,7 +188,7 @@ if (-d "$SdkDir") {
+ # improvement required
+ my $solar_java = $ENV{"ENABLE_JAVA"};
+ my $JDK = $ENV{"JDK"};
+- if (defined($solar_java) && $solar_java ne "" && (!defined($JDK) || $JDK ne "gcj")) {
++ if (defined($solar_java) && $solar_java ne "" && $ENV{"JAVADOC"} ne "") {
+ print "check java docu: ";
+ if (check_dir("docs/java/ref")) {
+ if (!check_file("docs/java/ref/index.html")) {
+diff --git a/Repository.mk b/Repository.mk
+index 5f2654b..471210f 100644
+--- a/Repository.mk
++++ b/Repository.mk
+@@ -834,7 +841,7 @@ $(eval $(call gb_Helper_register_packages_for_install,sdk,\
+ offapi_idl \
+ udkapi_idl \
+ $(if $(ENABLE_JAVA), \
+- odk_javadoc \
++ $(if $(JAVADOC),odk_javadoc) \
+ odk_uno_loader_classes \
+ odk_unowinreg \
+ ) \
--- /dev/null
+diff --git a/officecfg/registry/data/org/openoffice/Office/DataAccess.xcu b/officecfg/registry/data/org/openoffice/Office/DataAccess.xcu
+index 9be30a2..59c87cb 100644
+--- a/officecfg/registry/data/org/openoffice/Office/DataAccess.xcu
++++ b/officecfg/registry/data/org/openoffice/Office/DataAccess.xcu
+@@ -147,6 +147,30 @@
+ </node>
+ </node>
+ </node>
++ <node oor:name="JDBC">
++ <node oor:name="DriverClassPaths">
++ <node oor:name="org.mariadb.jdbc.Driver" oor:op="replace">
++ <prop oor:name="Path">
++ <value>file:///usr/share/java/mariadb-java-client.jar</value>
++ </prop>
++ </node>
++ <node oor:name="com.mysql.jdbc.Driver" oor:op="replace">
++ <prop oor:name="Path">
++ <value>file:///usr/share/java/mysql.jar</value>
++ </prop>
++ </node>
++ <node oor:name="org.postgresql.Driver" oor:op="replace">
++ <prop oor:name="Path">
++ <value>file:///usr/share/java/posgresql.jar</value>
++ </prop>
++ </node>
++ <node oor:name="net.sourceforge.jtds.jdbc.Driver" oor:op="replace">
++ <prop oor:name="Path">
++ <value>file:///usr/share/java/jtds.jar</value>
++ </prop>
++ </node>
++ </node>
++ </node>
+ <node oor:name="RegisteredNames">
+ <node oor:name="EvolutionLocal" oor:op="replace" install:module="evoab2">
+ <prop oor:name="Location" oor:type="xs:string">
--- /dev/null
+From 39de7d73fdab86a1531f19076ab1d07fcff97b55 Mon Sep 17 00:00:00 2001
+From: Eike Rathke <erack@redhat.com>
+Date: Thu, 26 Jul 2018 20:46:23 +0200
+Subject: Introduce next Japanese gengou era 'Reiwa'
+
+Prepare for "Japan's Y2K" Gengou calendar era switch after 2019-04-30
+
+The emperor Akihito will abdicate on 2019-04-30. The next emperor
+will be Naruhito, but so far neither the new era name (Heisei for
+Akihito) nor its abbreviation or a Unicode character are
+determined. At least introduce the new era with some dummy names
+(Naruhito,Na,N).
+
+Change-Id: I8c0af390ca0408ac259e47e7eaf2e49b5889c9ba
+Reviewed-on: https://gerrit.libreoffice.org/58142
+Reviewed-by: Eike Rathke <erack@redhat.com>
+Tested-by: Jenkins
+
+Introduce next Japanese gengou era 'Reiwa'
+
+starting from 2019-05-01, which has been announced officially.
+
+This fills the provisional slot acknowledged at
+cacbb0faef77ae8462de9ff5c7307a6a2e28b2bb.
+
+Change-Id: Ifb12e6afaad4c66d455f664b46ec946e80324e87
+Reviewed-on: https://gerrit.libreoffice.org/70157
+Reviewed-by: Eike Rathke <erack@redhat.com>
+Tested-by: Jenkins
+Reviewed-on: https://gerrit.libreoffice.org/70185
+---
+ i18npool/source/calendar/calendar_gregorian.cxx | 9 +++++----
+ i18npool/source/localedata/data/ja_JP.xml | 5 +++++
+ svl/source/numbers/zformat.cxx | 3 +++
+ 3 files changed, 13 insertions(+), 4 deletions(-)
+
+diff --git a/i18npool/source/calendar/calendar_gregorian.cxx b/i18npool/source/calendar/calendar_gregorian.cxx
+index a4ac0ac..7abef52 100644
+--- a/i18npool/source/calendar/calendar_gregorian.cxx
++++ b/i18npool/source/calendar/calendar_gregorian.cxx
+@@ -205,10 +205,11 @@ Calendar_hanja::loadCalendar( const OUString& /*uniqueID*/, const css::lang::Loc
+ }
+
+ static const Era gengou_eraArray[] = {
+- {1868, 1, 1, 0},
+- {1912, 7, 30, 0},
+- {1926, 12, 25, 0},
+- {1989, 1, 8, 0},
++ {1868, 1, 1, 0}, // Meiji
++ {1912, 7, 30, 0}, // Taisho
++ {1926, 12, 25, 0}, // Showa
++ {1989, 1, 8, 0}, // Heisei
++ {2019, 5, 1, 0}, // Reiwa
+ {0, 0, 0, 0}
+ };
+ Calendar_gengou::Calendar_gengou() : Calendar_gregorian(gengou_eraArray)
+diff --git a/i18npool/source/localedata/data/ja_JP.xml b/i18npool/source/localedata/data/ja_JP.xml
+index 7d75260..c15c665 100644
+--- a/i18npool/source/localedata/data/ja_JP.xml
++++ b/i18npool/source/localedata/data/ja_JP.xml
+@@ -480,6 +480,11 @@
+ <DefaultAbbrvName>平</DefaultAbbrvName>
+ <DefaultFullName>平成</DefaultFullName>
+ </Era>
++ <Era>
++ <EraID>Reiwa</EraID>
++ <DefaultAbbrvName>令</DefaultAbbrvName>
++ <DefaultFullName>令和</DefaultFullName>
++ </Era>
+ </Eras>
+ <StartDayOfWeek>
+ <DayID>sun</DayID>
+diff --git a/svl/source/numbers/zformat.cxx b/svl/source/numbers/zformat.cxx
+index c9bd3d8..e14413c 100644
+--- a/svl/source/numbers/zformat.cxx
++++ b/svl/source/numbers/zformat.cxx
+@@ -3409,6 +3409,9 @@ void SvNumberformat::ImpAppendEraG( OUStringBuffer& OutString,
+ case 4:
+ cEra = 'H';
+ break;
++ case 5:
++ cEra = 'R';
++ break;
+ default:
+ cEra = '?';
+ break;
+--
+cgit v1.1
+
--- /dev/null
+commit b71107fb12e3c3125e0cb62c5a4f6636a80c6408
+Author: Bjoern Michaelsen <bjoern.michaelsen@canonical.com>
+AuthorDate: Tue Jun 7 11:52:37 2011 +0200
+Commit: Bjoern Michaelsen <bjoern.michaelsen@canonical.com>
+CommitDate: Tue Jun 7 11:52:37 2011 +0200
+
+ on debian-based systems, we know where our soffice binary is
+
+diff --git a/jurt/com/sun/star/lib/util/NativeLibraryLoader.java b/jurt/com/sun/star/lib/util/NativeLibraryLoader.jav
+index da22980..36664ca 100644
+--- libreoffice-3.5.0/jurt/com/sun/star/lib/util/NativeLibraryLoader.java
++++ libreoffice-3.5.0/jurt/com/sun/star/lib/util/NativeLibraryLoader.java
+@@ -111,6 +111,8 @@ public final class NativeLibraryLoader {
+ }
+ }
+ }
++ if (name.equals("soffice"))
++ return new File("/usr/lib/libreoffice/program/soffice");
+ return null;
+ }
--- /dev/null
+From 3ff117a020def02de0041d67825a124be95c3ec5 Mon Sep 17 00:00:00 2001
+From: Stephan Bergmann <sbergman@redhat.com>
+Date: Sat, 3 Aug 2019 16:37:48 +0100
+Subject: keep name percent-encoded
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Change-Id: I470c4b24192c3e3c9b556a9bbb3b084359e0033b
+Reviewed-on: https://gerrit.libreoffice.org/77007
+Reviewed-by: Caolán McNamara <caolanm@redhat.com>
+Reviewed-by: Michael Stahl <Michael.Stahl@cib.de>
+Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
+Tested-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
+---
+ scripting/source/pyprov/pythonscript.py | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/scripting/source/pyprov/pythonscript.py b/scripting/source/pyprov/pythonscript.py
+index f1b2bfc..64e1337 100644
+--- a/scripting/source/pyprov/pythonscript.py
++++ b/scripting/source/pyprov/pythonscript.py
+@@ -219,7 +219,9 @@ class MyUriHelper:
+
+ # path to the .py file + "$functionname, arguments, etc
+ xStorageUri = self.m_uriRefFac.parse(scriptURI)
+- sStorageUri = xStorageUri.getName().replace( "|", "/" );
++ # getName will apply url-decoding to the name, so encode back
++ sStorageUri = xStorageUri.getName().replace("%", "%25")
++ sStorageUri = sStorageUri.replace( "|", "/" )
+
+ # path to the .py file, relative to the base
+ sFileUri = sStorageUri[0:sStorageUri.find("$")]
+--
+cgit v1.1
+
--- /dev/null
+Description: Fix incorrect parameter type to std::min() on m68k
+Author: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+Last-Update: 2018-12-28
+
+--- libreoffice-6.1.4.orig/cppu/source/typelib/typelib.cxx
++++ libreoffice-6.1.4/cppu/source/typelib/typelib.cxx
+@@ -1660,7 +1660,7 @@ extern "C" sal_Int32 typelib_typedescrip
+ #ifdef __m68k__
+ // Anything that is at least 16 bits wide is aligned on a 16-bit
+ // boundary on the m68k default abi
+- sal_Int32 nMaxAlign = std::min(rMaxIntegralTypeSize, 2);
++ sal_Int32 nMaxAlign = std::min(rMaxIntegralTypeSize, sal_Int32( 2 ));
+ nStructSize = (nStructSize + nMaxAlign -1) / nMaxAlign * nMaxAlign;
+ #else
+ // Example: A { double; int; } structure has a size of 16 instead of 10. The
--- /dev/null
+diff --git a/scp2/InstallModule_draw.mk b/scp2/InstallModule_draw.mk
+index a7c02be..d48edf2 100644
+--- a/scp2/InstallModule_draw.mk
++++ b/scp2/InstallModule_draw.mk
+@@ -10,6 +10,7 @@
+ $(eval $(call gb_InstallModule_InstallModule,scp2/draw))
+
+ $(eval $(call gb_InstallModule_use_auto_install_libs,scp2/draw,\
++ draw \
+ draw_brand \
+ ))
+
+diff --git a/scp2/source/draw/module_draw.scp b/scp2/source/draw/module_draw.scp
+index 8737579..0913c61 100644
+--- a/scp2/source/draw/module_draw.scp
++++ b/scp2/source/draw/module_draw.scp
+@@ -18,6 +18,7 @@
+
+ #include "macros.inc"
+
++#include "AutoInstall/draw"
+ #include "AutoInstall/draw_brand"
+
+ Module gid_Module_Prg_Draw
+@@ -34,7 +35,8 @@ Module gid_Module_Prg_Draw_Bin
+ Sortkey = "100";
+ Default = YES;
+ Styles = (HIDDEN_ROOT);
+- Files = (gid_File_Extra_Urldesktop_Draw,gid_File_Extra_Urlnew_Draw,gid_File_Extra_Urlstart_Draw,gid_File_Extra_Urltasks_Draw,
++ Files = (auto_draw_ALL
++ gid_File_Extra_Urldesktop_Draw,gid_File_Extra_Urlnew_Draw,gid_File_Extra_Urlstart_Draw,gid_File_Extra_Urltasks_Draw,
+ gid_File_Share_Registry_Draw_Xcd,
+ gid_File_Tmp_Userinstall_Draw_Inf);
+ End
+diff --git a/scp2/AutoInstall.mk b/scp2/AutoInstall.mk
+index 7d2a347..a15ac52 100644
+--- a/scp2/AutoInstall.mk
++++ b/scp2/AutoInstall.mk
+@@ -17,6 +17,7 @@ $(eval $(call gb_AutoInstall_add_module,base_brand,,LIBO_EXECUTABLE,,PACKAGE_FIL
+ $(eval $(call gb_AutoInstall_add_module,brand,,LIBO_EXECUTABLE,,PACKAGE_FILELIST))
+ $(eval $(call gb_AutoInstall_add_module,calc,LIBO_LIB_FILE,,,PACKAGE_FILELIST))
+ $(eval $(call gb_AutoInstall_add_module,calc_brand,,LIBO_EXECUTABLE,,PACKAGE_FILELIST))
++$(eval $(call gb_AutoInstall_add_module,draw,LIBO_LIB_FILE))
+ $(eval $(call gb_AutoInstall_add_module,draw_brand,,LIBO_EXECUTABLE,,PACKAGE_FILELIST))
+ $(eval $(call gb_AutoInstall_add_module,extensions_ct2n,,,,PACKAGE_FILELIST))
+ $(eval $(call gb_AutoInstall_add_module,extensions_bsh,,,LIBO_JAR_FILE))
+diff --git a/Repository.mk b/Repository.mk
+index fa62def2fc91..7fc34d4fe9cf 100644
+--- a/Repository.mk
++++ b/Repository.mk
+@@ -247,13 +247,28 @@ $(eval $(call gb_Helper_register_executables_for_install,UREBIN,ure,\
+
+ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,base, \
+ abp \
++ calc \
++ $(call gb_Helper_optional,DBCONNECTIVITY, \
++ dba \
++ dbase \
++ dbaxml \
++ dbahsql) \
+ dbp \
+ dbu \
++ $(call gb_Helper_optional,DBCONNECTIVITY,flat) \
++ $(if $(ENABLE_JAVA),jdbc) \
++ $(call gb_Helper_optional,DBCONNECTIVITY,mysql) \
++ odbc \
++))
++
++$(eval $(call gb_Helper_register_libraries_for_install,PLAINLIBS_OOO,base, \
++ $(call gb_Helper_optional,DBCONNECTIVITY,dbpool2) \
++ $(if $(ENABLE_JAVA),hsqldb) \
++ sdbc2 \
+ ))
+
+ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,calc, \
+ analysis \
+- $(call gb_Helper_optional,DBCONNECTIVITY,calc) \
+ date \
+ pricing \
+ sc \
+@@ -265,6 +280,14 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,calc, \
+ $(call gb_Helper_optional,SCRIPTING,vbaobj) \
+ ))
+
++$(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,draw, \
++ animcore \
++ sd \
++ sdd \
++ sdfilt \
++ sdui \
++))
++
+ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,graphicfilter, \
+ svgfilter \
+ flash \
+@@ -273,10 +296,10 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,graphicfilter, \
+ ))
+
+ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,impress, \
+- animcore \
+ PresenterScreen \
+ PresentationMinimizer \
+ wpftimpress \
++ slideshow \
+ ))
+
+ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,onlineupdate, \
+@@ -350,11 +373,7 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,ooo, \
+ ctl \
+ cui \
+ $(call gb_Helper_optional,DBCONNECTIVITY, \
+- dba \
+- dbase \
+- dbmm \
+- dbaxml \
+- dbahsql) \
++ dbmm) \
+ dbtools \
+ deploymentmisc \
+ $(if $(filter-out MACOSX WNT,$(OS)),desktopbe1) \
+@@ -368,7 +387,6 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,ooo, \
+ evtatt \
+ expwrap \
+ $(call gb_Helper_optional,DBCONNECTIVITY, \
+- flat \
+ file) \
+ filterconfig \
+ fps_office \
+@@ -389,7 +407,6 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,ooo, \
+ gie \
+ hyphen \
+ icg \
+- $(if $(ENABLE_JAVA),jdbc) \
+ ldapbe2 \
+ $(if $(filter WNT,$(OS)),WinUserInfoBe) \
+ localebe1 \
+@@ -403,9 +420,7 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,ooo, \
+ msfilter \
+ $(call gb_Helper_optional,SCRIPTING,msforms) \
+ mtfrenderer \
+- $(call gb_Helper_optional,DBCONNECTIVITY,mysql) \
+ numbertext \
+- odbc \
+ odfflatxml \
+ offacc \
+ oox \
+@@ -418,13 +433,8 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,ooo, \
+ sb \
+ $(call gb_Helper_optional,DBCONNECTIVITY,sdbt) \
+ scn \
+- sd \
+- sdd \
+- sdfilt \
+- sdui \
+ sfx \
+ simplecanvas \
+- slideshow \
+ sot \
+ spell \
+ $(if $(ENABLE_HEADLESS),,spl) \
+@@ -436,7 +446,6 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,ooo, \
+ svt \
+ svx \
+ svxcore \
+- sw \
+ syssh \
+ textconversiondlgs \
+ textfd \
+@@ -521,6 +530,7 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,writer, \
+ hwp \
+ $(if $(ENABLE_LWP),lwpft) \
+ msword \
++ sw \
+ swd \
+ swui \
+ t602filter \
+@@ -599,14 +609,12 @@ $(eval $(call gb_Helper_register_libraries_for_install,PLAINLIBS_OOO,ooo, \
+ cached1 \
+ collator_data \
+ comphelper \
+- $(call gb_Helper_optional,DBCONNECTIVITY,dbpool2) \
+ $(call gb_Helper_optional,BREAKPAD,crashreport) \
+ deployment \
+ deploymentgui \
+ dict_ja \
+ dict_zh \
+ embobj \
+- $(if $(ENABLE_JAVA),hsqldb) \
+ i18nutil \
+ index_data \
+ $(if $(and $(ENABLE_GTK3), $(filter LINUX %BSD SOLARIS,$(OS))), libreofficekitgtk) \
+@@ -622,7 +630,6 @@ $(eval $(call gb_Helper_register_libraries_for_install,PLAINLIBS_OOO,ooo, \
+ package2 \
+ $(if $(USING_X11),recentfile) \
+ $(call gb_Helper_optional,SCRIPTING,scriptframe) \
+- sdbc2 \
+ sofficeapp \
+ srtrs1 \
+ $(if $(filter $(OS),WNT),sysdtrans) \
--- /dev/null
+From 3debd23d47d1fcbef76033c739a0b7003824d4ca Mon Sep 17 00:00:00 2001
+From: Noel Grandin <noel.grandin@collabora.co.uk>
+Date: Sat, 11 Aug 2018 13:25:09 +0200
+Subject: [PATCH] Update mdds to 1.4.1
+
+loplugin:constantparam
+
+Reviewed-on: https://gerrit.libreoffice.org/58875
+Tested-by: Jenkins
+Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
+(cherry picked from commit bb6f2b12e8f0bbc99a5ca93141d35fd40b043e55)
+
+Update mdds to 1.4.1.
+
+The largest change in 1.4.x relevant to the calc code is that the
+multi_type_matrix::walk() methods now take a copy of the function
+object rather than a reference, to allow for it to take an inline
+lambda function. Instead, it does return a instance of the input
+function object, similar to how std::for_each() behaves.
+
+In case the function object contains a large data member, try to
+make it a moveable so that it will get moved rather than copied
+when going through one of the walk() methods.
+
+Reviewed-on: https://gerrit.libreoffice.org/59584
+Tested-by: Jenkins
+Reviewed-by: Kohei Yoshida <libreoffice@kohei.us>
+(cherry picked from commit 51f73f35ea61dd81dd3194af50394b98ff1bf8e9)
+
+mdds 1.4.1 is now a minimum requirement.
+
+Reviewed-on: https://gerrit.libreoffice.org/59614
+Tested-by: Jenkins
+Reviewed-by: Kohei Yoshida <libreoffice@kohei.us>
+(cherry picked from commit 4d1f735fcf064b18ef2848cc1f5a2a0616b0b33d)
+
+fd08fc4a2ed75039e5292a35ff08726e0126c77f
+647bcfbdd8e0417990ed93b25c1bca00f60df709
+
+Change-Id: I676a8408e97cc8134009f764736cad68513c89ad
+---
+ configure.ac | 2 +-
+ download.lst | 4 +-
+ external/mdds/UnpackedTarball_mdds.mk | 3 -
+ external/mdds/c++17.patch | 22 ---
+ sc/inc/scmatrix.hxx | 6 +-
+ sc/source/core/tool/interpr3.cxx | 4 +-
+ sc/source/core/tool/scmatrix.cxx | 208 +++++++++++++++++++-------
+ 7 files changed, 161 insertions(+), 88 deletions(-)
+ delete mode 100644 external/mdds/c++17.patch
+
+diff --git a/configure.ac b/configure.ac
+index 735ebf2e360a..3ff574a3f24f 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -8883,7 +8883,7 @@ AC_SUBST(SYSTEM_BOOST)
+ dnl ===================================================================
+ dnl Check for system mdds
+ dnl ===================================================================
+-libo_CHECK_SYSTEM_MODULE([mdds], [MDDS], [mdds-1.2 >= 1.2.3], ["-I${WORKDIR}/UnpackedTarball/mdds/include"])
++libo_CHECK_SYSTEM_MODULE([mdds], [MDDS], [mdds-1.4 >= 1.4.1], ["-I${WORKDIR}/UnpackedTarball/mdds/include"])
+
+ dnl ===================================================================
+ dnl Check for system glm
+diff --git a/download.lst b/download.lst
+index c40bece90e26..d4c145a0cfc9 100644
+--- a/download.lst
++++ b/download.lst
+@@ -166,8 +166,8 @@ export LXML_SHA256SUM := 940caef1ec7c78e0c34b0f6b94fe42d0f2022915ffc78643d28538a
+ export LXML_TARBALL := lxml-4.1.1.tgz
+ export MARIADB_CONNECTOR_C_SHA256SUM := fd2f751dea049c1907735eb236aeace1d811d6a8218118b00bbaa9b84dc5cd60
+ export MARIADB_CONNECTOR_C_TARBALL := a233181e03d3c307668b4c722d881661-mariadb_client-2.0.0-src.tar.gz
+-export MDDS_SHA256SUM := dcb8cd2425567a5a5ec164afea475bce57784bca3e352ad4cbdd3d1a7e08e5a1
+-export MDDS_TARBALL := mdds-1.3.1.tar.bz2
++export MDDS_SHA256SUM := 9ac690c37f5f06dc88551405d5daf9d9ad25edf65aae6325b59e905c2ba444c3
++export MDDS_TARBALL := mdds-1.4.1.tar.bz2
+ export MDNSRESPONDER_SHA256SUM := 4737cb51378377e11d0edb7bcdd1bec79cbdaa7b27ea09c13e3006e58f8d92c0
+ export MDNSRESPONDER_TARBALL := mDNSResponder-576.30.4.tar.gz
+ export MSPUB_SHA256SUM := ef36c1a1aabb2ba3b0bedaaafe717bf4480be2ba8de6f3894be5fd3702b013ba
+diff --git a/external/mdds/UnpackedTarball_mdds.mk b/external/mdds/UnpackedTarball_mdds.mk
+index 4f6db6b24e7b..c015f4c13f5a 100644
+--- a/external/mdds/UnpackedTarball_mdds.mk
++++ b/external/mdds/UnpackedTarball_mdds.mk
+@@ -13,10 +13,7 @@ $(eval $(call gb_UnpackedTarball_set_tarball,mdds,$(MDDS_TARBALL)))
+
+ $(eval $(call gb_UnpackedTarball_set_patchlevel,mdds,0))
+
+-# c++17.patch upstreamed as <https://gitlab.com/mdds/mdds/merge_requests/11> "Remove some
+-# unnecessary uses of obsolete std::unary_function":
+ $(eval $(call gb_UnpackedTarball_add_patches,mdds,\
+- external/mdds/c++17.patch \
+ ))
+
+ # vim: set noet sw=4 ts=4:
+diff --git a/external/mdds/c++17.patch b/external/mdds/c++17.patch
+deleted file mode 100644
+index d96910f34e68..000000000000
+--- a/external/mdds/c++17.patch
++++ /dev/null
+@@ -1,22 +0,0 @@
+---- include/mdds/multi_type_matrix.hpp
+-+++ include/mdds/multi_type_matrix.hpp
+-@@ -149,7 +149,7 @@
+-
+- private:
+- template<typename _Func>
+-- struct walk_func : std::unary_function<typename store_type::const_iterator::value_type, void>
+-+ struct walk_func
+- {
+- _Func& m_func;
+- walk_func(_Func& func) : m_func(func) {}
+---- include/mdds/multi_type_vector.hpp
+-+++ include/mdds/multi_type_vector.hpp
+-@@ -139,7 +139,7 @@
+- block& operator=(block);
+- };
+-
+-- struct element_block_deleter : public std::unary_function<void, const element_block_type*>
+-+ struct element_block_deleter
+- {
+- void operator() (const element_block_type* p)
+- {
+diff --git a/sc/inc/scmatrix.hxx b/sc/inc/scmatrix.hxx
+index 9be335fbc06b..b1bc5e0e3047 100644
+--- a/sc/inc/scmatrix.hxx
++++ b/sc/inc/scmatrix.hxx
+@@ -399,7 +399,7 @@ public:
+ virtual void DivOp(bool bFlag, double fVal, ScMatrix& rMat) = 0;
+ virtual void PowOp(bool bFlag, double fVal, ScMatrix& rMat) = 0;
+
+- virtual std::vector<ScMatrix::IterateResult> Collect(bool bTextAsZero, const std::vector<std::unique_ptr<sc::op::Op>>& aOp) = 0;
++ virtual std::vector<ScMatrix::IterateResult> Collect(const std::vector<std::unique_ptr<sc::op::Op>>& aOp) = 0;
+
+ virtual void ExecuteOperation(const std::pair<size_t, size_t>& rStartPos, const std::pair<size_t, size_t>& rEndPos,
+ DoubleOpFunction aDoubleFunc, BoolOpFunction aBoolFunc, StringOpFunction aStringFunc,
+@@ -617,7 +617,7 @@ public:
+ virtual void DivOp(bool bFlag, double fVal, ScMatrix& rMat) override;
+ virtual void PowOp(bool bFlag, double fVal, ScMatrix& rMat) override;
+
+- virtual std::vector<ScMatrix::IterateResult> Collect(bool bTextAsZero, const std::vector<std::unique_ptr<sc::op::Op>>& aOp) override;
++ virtual std::vector<ScMatrix::IterateResult> Collect(const std::vector<std::unique_ptr<sc::op::Op>>& aOp) override;
+
+ virtual void ExecuteOperation(const std::pair<size_t, size_t>& rStartPos, const std::pair<size_t, size_t>& rEndPos,
+ DoubleOpFunction aDoubleFunc, BoolOpFunction aBoolFunc, StringOpFunction aStringFunc,
+@@ -837,7 +837,7 @@ public:
+ virtual void DivOp(bool bFlag, double fVal, ScMatrix& rMat) override;
+ virtual void PowOp(bool bFlag, double fVal, ScMatrix& rMat) override;
+
+- virtual std::vector<ScMatrix::IterateResult> Collect(bool bTextAsZero, const std::vector<std::unique_ptr<sc::op::Op>>& aOp) override;
++ virtual std::vector<ScMatrix::IterateResult> Collect(const std::vector<std::unique_ptr<sc::op::Op>>& aOp) override;
+
+ virtual void ExecuteOperation(const std::pair<size_t, size_t>& rStartPos, const std::pair<size_t, size_t>& rEndPos,
+ DoubleOpFunction aDoubleFunc, BoolOpFunction aBoolFunc, StringOpFunction aStringFunc,
+diff --git a/sc/source/core/tool/interpr3.cxx b/sc/source/core/tool/interpr3.cxx
+index 28e8cd9a9c48..88c0d8353783 100644
+--- a/sc/source/core/tool/interpr3.cxx
++++ b/sc/source/core/tool/interpr3.cxx
+@@ -2745,12 +2745,12 @@ void ScInterpreter::ScFTest()
+ aOp.emplace_back(new sc::op::Op(0.0, [](double& rAccum, double fVal){rAccum += fVal;}));
+ aOp.emplace_back(new sc::op::Op(0.0, [](double& rAccum, double fVal){rAccum += fVal * fVal;}));
+
+- auto aVal1 = pMat1->Collect(false, aOp);
++ auto aVal1 = pMat1->Collect(aOp);
+ fSum1 = aVal1[0].mfFirst + aVal1[0].mfRest;
+ fSumSqr1 = aVal1[1].mfFirst + aVal1[1].mfRest;
+ fCount1 = aVal1[2].mnCount;
+
+- auto aVal2 = pMat2->Collect(false, aOp);
++ auto aVal2 = pMat2->Collect(aOp);
+ fSum2 = aVal2[0].mfFirst + aVal2[0].mfRest;
+ fSumSqr2 = aVal2[1].mfFirst + aVal2[1].mfRest;
+ fCount2 = aVal2[2].mnCount;
+diff --git a/sc/source/core/tool/scmatrix.cxx b/sc/source/core/tool/scmatrix.cxx
+index 7f8c8767e917..7dadec9f0b57 100644
+--- a/sc/source/core/tool/scmatrix.cxx
++++ b/sc/source/core/tool/scmatrix.cxx
+@@ -160,6 +160,12 @@ public:
+ maNewMatValues.reserve(nRow*nCol);
+ }
+
++ CompareMatrixElemFunc( const CompareMatrixElemFunc& ) = delete;
++ CompareMatrixElemFunc& operator= ( const CompareMatrixElemFunc& ) = delete;
++
++ CompareMatrixElemFunc( CompareMatrixElemFunc&& ) = default;
++ CompareMatrixElemFunc& operator= ( CompareMatrixElemFunc&& ) = default;
++
+ void operator() (const MatrixImplType::element_block_node_type& node)
+ {
+ switch (node.type)
+@@ -323,7 +329,7 @@ public:
+ const ScFullMatrix::EmptyOpFunction& aEmptyFunc) const;
+
+ template<typename T>
+- std::vector<ScMatrix::IterateResult> ApplyCollectOperation(bool bTextAsZero, const std::vector<std::unique_ptr<T>>& aOp);
++ std::vector<ScMatrix::IterateResult> ApplyCollectOperation(const std::vector<std::unique_ptr<T>>& aOp);
+
+ void MatConcat(SCSIZE nMaxCol, SCSIZE nMaxRow, const ScMatrixRef& xMat1, const ScMatrixRef& xMat2,
+ SvNumberFormatter& rFormatter, svl::SharedStringPool& rPool);
+@@ -979,7 +985,7 @@ void ScMatrixImpl::CompareEqual()
+ {
+ MatrixImplType::size_pair_type aSize = maMat.size();
+ CompareMatrixElemFunc<ElemEqualZero> aFunc(aSize.row, aSize.column);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(std::move(aFunc));
+ aFunc.swap(maMat);
+ }
+
+@@ -987,7 +993,7 @@ void ScMatrixImpl::CompareNotEqual()
+ {
+ MatrixImplType::size_pair_type aSize = maMat.size();
+ CompareMatrixElemFunc<ElemNotEqualZero> aFunc(aSize.row, aSize.column);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(std::move(aFunc));
+ aFunc.swap(maMat);
+ }
+
+@@ -995,7 +1001,7 @@ void ScMatrixImpl::CompareLess()
+ {
+ MatrixImplType::size_pair_type aSize = maMat.size();
+ CompareMatrixElemFunc<ElemLessZero> aFunc(aSize.row, aSize.column);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(std::move(aFunc));
+ aFunc.swap(maMat);
+ }
+
+@@ -1003,7 +1009,7 @@ void ScMatrixImpl::CompareGreater()
+ {
+ MatrixImplType::size_pair_type aSize = maMat.size();
+ CompareMatrixElemFunc<ElemGreaterZero> aFunc(aSize.row, aSize.column);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(std::move(aFunc));
+ aFunc.swap(maMat);
+ }
+
+@@ -1011,7 +1017,7 @@ void ScMatrixImpl::CompareLessEqual()
+ {
+ MatrixImplType::size_pair_type aSize = maMat.size();
+ CompareMatrixElemFunc<ElemLessEqualZero> aFunc(aSize.row, aSize.column);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(std::move(aFunc));
+ aFunc.swap(maMat);
+ }
+
+@@ -1019,7 +1025,7 @@ void ScMatrixImpl::CompareGreaterEqual()
+ {
+ MatrixImplType::size_pair_type aSize = maMat.size();
+ CompareMatrixElemFunc<ElemGreaterEqualZero> aFunc(aSize.row, aSize.column);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(std::move(aFunc));
+ aFunc.swap(maMat);
+ }
+
+@@ -1174,21 +1180,34 @@ public:
+ template<typename Op>
+ class WalkElementBlocksMultipleValues
+ {
+- const std::vector<std::unique_ptr<Op>>& maOp;
++ const std::vector<std::unique_ptr<Op>>* mpOp;
+ std::vector<ScMatrix::IterateResult> maRes;
+ bool mbFirst:1;
+- bool mbTextAsZero:1;
+ public:
+- WalkElementBlocksMultipleValues(bool bTextAsZero, const std::vector<std::unique_ptr<Op>>& aOp) :
+- maOp(aOp), mbFirst(true), mbTextAsZero(bTextAsZero)
++ WalkElementBlocksMultipleValues(const std::vector<std::unique_ptr<Op>>& aOp) :
++ mpOp(&aOp), mbFirst(true)
+ {
+- for (const auto& rpOp : maOp)
++ for (const auto& rpOp : *mpOp)
+ {
+ maRes.emplace_back(rpOp->mInitVal, rpOp->mInitVal, 0);
+ }
+ maRes.emplace_back(0.0, 0.0, 0); // count
+ }
+
++ WalkElementBlocksMultipleValues( const WalkElementBlocksMultipleValues& ) = delete;
++ WalkElementBlocksMultipleValues& operator= ( const WalkElementBlocksMultipleValues& ) = delete;
++
++ WalkElementBlocksMultipleValues( WalkElementBlocksMultipleValues&& r ) :
++ mpOp(r.mpOp), maRes(std::move(r.maRes)), mbFirst(r.mbFirst) {}
++
++ WalkElementBlocksMultipleValues& operator= ( WalkElementBlocksMultipleValues&& r )
++ {
++ mpOp = r.mpOp;
++ maRes = std::move(r.maRes);
++ mbFirst = r.mbFirst;
++ return *this;
++ }
++
+ const std::vector<ScMatrix::IterateResult>& getResult() const { return maRes; }
+
+ void operator() (const MatrixImplType::element_block_node_type& node)
+@@ -1205,17 +1224,17 @@ public:
+ {
+ if (mbFirst)
+ {
+- for (auto i = 0u; i < maOp.size(); ++i)
++ for (auto i = 0u; i < mpOp->size(); ++i)
+ {
+- (*maOp[i])(maRes[i].mfFirst, *it);
++ (*(*mpOp)[i])(maRes[i].mfFirst, *it);
+ }
+ mbFirst = false;
+ }
+ else
+ {
+- for (auto i = 0u; i < maOp.size(); ++i)
++ for (auto i = 0u; i < mpOp->size(); ++i)
+ {
+- (*maOp[i])(maRes[i].mfRest, *it);
++ (*(*mpOp)[i])(maRes[i].mfRest, *it);
+ }
+ }
+ }
+@@ -1232,17 +1251,17 @@ public:
+ {
+ if (mbFirst)
+ {
+- for (auto i = 0u; i < maOp.size(); ++i)
++ for (auto i = 0u; i < mpOp->size(); ++i)
+ {
+- (*maOp[i])(maRes[i].mfFirst, *it);
++ (*(*mpOp)[i])(maRes[i].mfFirst, *it);
+ }
+ mbFirst = false;
+ }
+ else
+ {
+- for (auto i = 0u; i < maOp.size(); ++i)
++ for (auto i = 0u; i < mpOp->size(); ++i)
+ {
+- (*maOp[i])(maRes[i].mfRest, *it);
++ (*(*mpOp)[i])(maRes[i].mfRest, *it);
+ }
+ }
+ }
+@@ -1250,9 +1269,6 @@ public:
+ }
+ break;
+ case mdds::mtm::element_string:
+- if (mbTextAsZero)
+- maRes.back().mnCount += node.size;
+- break;
+ case mdds::mtm::element_empty:
+ default:
+ ;
+@@ -1310,8 +1326,8 @@ template<typename Type>
+ class WalkAndMatchElements
+ {
+ Type maMatchValue;
+- const size_t mnStartIndex;
+- const size_t mnStopIndex;
++ size_t mnStartIndex;
++ size_t mnStopIndex;
+ size_t mnResult;
+ size_t mnIndex;
+
+@@ -1669,6 +1685,24 @@ public:
+ maResValues.reserve(nResSize);
+ }
+
++ CompareMatrixFunc( const CompareMatrixFunc& ) = delete;
++ CompareMatrixFunc& operator= ( const CompareMatrixFunc& ) = delete;
++
++ CompareMatrixFunc( CompareMatrixFunc&& r ) :
++ mrComp(r.mrComp),
++ mnMatPos(r.mnMatPos),
++ mpOptions(r.mpOptions),
++ maResValues(std::move(r.maResValues)) {}
++
++ CompareMatrixFunc& operator= ( CompareMatrixFunc&& r )
++ {
++ mrComp = r.mrComp;
++ mnMatPos = r.mnMatPos;
++ mpOptions = r.mpOptions;
++ maResValues = std::move(r.maResValues);
++ return *this;
++ }
++
+ void operator() (const MatrixImplType::element_block_node_type& node)
+ {
+ sc::Compare::Cell& rCell = mrComp.maCells[mnMatPos];
+@@ -1777,6 +1811,24 @@ public:
+ maResValues.reserve(nResSize);
+ }
+
++ CompareMatrixToNumericFunc( const CompareMatrixToNumericFunc& ) = delete;
++ CompareMatrixToNumericFunc& operator= ( const CompareMatrixToNumericFunc& ) = delete;
++
++ CompareMatrixToNumericFunc( CompareMatrixToNumericFunc&& r ) :
++ mrComp(r.mrComp),
++ mfRightValue(r.mfRightValue),
++ mpOptions(r.mpOptions),
++ maResValues(std::move(r.maResValues)) {}
++
++ CompareMatrixToNumericFunc& operator= ( CompareMatrixToNumericFunc&& r )
++ {
++ mrComp = r.mrComp;
++ mfRightValue = r.mfRightValue;
++ mpOptions = r.mpOptions;
++ maResValues = std::move(r.maResValues);
++ return *this;
++ }
++
+ void operator() (const MatrixImplType::element_block_node_type& node)
+ {
+ sc::Compare::Cell& rCell = mrComp.maCells[0];
+@@ -1840,6 +1892,17 @@ class ToDoubleArray
+ double mfNaN;
+ bool mbEmptyAsZero;
+
++ void moveArray( ToDoubleArray& r )
++ {
++ // Re-create the iterator from the new array after the array has been
++ // moved, to ensure that the iterator points to a valid array
++ // position.
++ size_t n = std::distance(r.maArray.begin(), r.miPos);
++ maArray = std::move(r.maArray);
++ miPos = maArray.begin();
++ std::advance(miPos, n);
++ }
++
+ public:
+ ToDoubleArray( size_t nSize, bool bEmptyAsZero ) :
+ maArray(nSize, 0.0), miPos(maArray.begin()), mbEmptyAsZero(bEmptyAsZero)
+@@ -1847,6 +1910,23 @@ public:
+ mfNaN = CreateDoubleError( FormulaError::ElementNaN);
+ }
+
++ ToDoubleArray( const ToDoubleArray& ) = delete;
++ ToDoubleArray& operator= ( const ToDoubleArray& ) = delete;
++
++ ToDoubleArray( ToDoubleArray&& r ) :
++ mfNaN(r.mfNaN), mbEmptyAsZero(r.mbEmptyAsZero)
++ {
++ moveArray(r);
++ }
++
++ ToDoubleArray& operator= ( ToDoubleArray&& r )
++ {
++ mfNaN = r.mfNaN;
++ mbEmptyAsZero = r.mbEmptyAsZero;
++ moveArray(r);
++ return *this;
++ }
++
+ void operator() (const MatrixImplType::element_block_node_type& node)
+ {
+ using namespace mdds::mtv;
+@@ -1917,6 +1997,12 @@ public:
+ mfNaN = CreateDoubleError( FormulaError::ElementNaN);
+ }
+
++ MergeDoubleArrayFunc( const MergeDoubleArrayFunc& ) = delete;
++ MergeDoubleArrayFunc& operator= ( const MergeDoubleArrayFunc& ) = delete;
++
++ MergeDoubleArrayFunc( MergeDoubleArrayFunc&& ) = default;
++ MergeDoubleArrayFunc& operator= ( MergeDoubleArrayFunc&& ) = default;
++
+ void operator() (const MatrixImplType::element_block_node_type& node)
+ {
+ using namespace mdds::mtv;
+@@ -1982,7 +2068,7 @@ template<typename TOp>
+ ScMatrix::IterateResult GetValueWithCount(bool bTextAsZero, const MatrixImplType& maMat)
+ {
+ WalkElementBlocks<TOp> aFunc(bTextAsZero);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(aFunc);
+ return aFunc.getResult();
+ }
+
+@@ -2006,49 +2092,49 @@ ScMatrix::IterateResult ScMatrixImpl::Product(bool bTextAsZero) const
+ size_t ScMatrixImpl::Count(bool bCountStrings, bool bCountErrors) const
+ {
+ CountElements aFunc(bCountStrings, bCountErrors);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(aFunc);
+ return aFunc.getCount();
+ }
+
+ size_t ScMatrixImpl::MatchDoubleInColumns(double fValue, size_t nCol1, size_t nCol2) const
+ {
+ WalkAndMatchElements<double> aFunc(fValue, maMat.size(), nCol1, nCol2);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(aFunc);
+ return aFunc.getMatching();
+ }
+
+ size_t ScMatrixImpl::MatchStringInColumns(const svl::SharedString& rStr, size_t nCol1, size_t nCol2) const
+ {
+ WalkAndMatchElements<svl::SharedString> aFunc(rStr, maMat.size(), nCol1, nCol2);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(aFunc);
+ return aFunc.getMatching();
+ }
+
+ double ScMatrixImpl::GetMaxValue( bool bTextAsZero ) const
+ {
+ CalcMaxMinValue<MaxOp> aFunc(bTextAsZero);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(aFunc);
+ return aFunc.getValue();
+ }
+
+ double ScMatrixImpl::GetMinValue( bool bTextAsZero ) const
+ {
+ CalcMaxMinValue<MinOp> aFunc(bTextAsZero);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(aFunc);
+ return aFunc.getValue();
+ }
+
+ double ScMatrixImpl::GetGcd() const
+ {
+ CalcGcdLcm<Gcd> aFunc;
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(aFunc);
+ return aFunc.getResult();
+ }
+
+ double ScMatrixImpl::GetLcm() const
+ {
+ CalcGcdLcm<Lcm> aFunc;
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(aFunc);
+ return aFunc.getResult();
+ }
+
+@@ -2065,7 +2151,7 @@ ScMatrixRef ScMatrixImpl::CompareMatrix(
+ // function object that has much less branching for much better
+ // performance.
+ CompareMatrixToNumericFunc aFunc(nSize, rComp, rComp.maCells[1].mfValue, pOptions);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(std::move(aFunc));
+
+ // We assume the result matrix has the same dimension as this matrix.
+ const std::vector<double>& rResVal = aFunc.getValues();
+@@ -2077,7 +2163,7 @@ ScMatrixRef ScMatrixImpl::CompareMatrix(
+ }
+
+ CompareMatrixFunc aFunc(nSize, rComp, nMatPos, pOptions);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(std::move(aFunc));
+
+ // We assume the result matrix has the same dimension as this matrix.
+ const std::vector<double>& rResVal = aFunc.getValues();
+@@ -2091,7 +2177,7 @@ void ScMatrixImpl::GetDoubleArray( std::vector<double>& rArray, bool bEmptyAsZer
+ {
+ MatrixImplType::size_pair_type aSize = maMat.size();
+ ToDoubleArray aFunc(aSize.row*aSize.column, bEmptyAsZero);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(std::move(aFunc));
+ aFunc.swap(rArray);
+ }
+
+@@ -2107,7 +2193,7 @@ void ScMatrixImpl::MergeDoubleArray( std::vector<double>& rArray, ScFullMatrix::
+ case ScFullMatrix::Mul:
+ {
+ MergeDoubleArrayFunc<ArrayMul> aFunc(rArray);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(std::move(aFunc));
+ }
+ break;
+ default:
+@@ -2329,16 +2415,26 @@ struct MatrixOpWrapper
+ private:
+ MatrixImplType& mrMat;
+ MatrixImplType::position_type pos;
+- T maOp;
++ const T* mpOp;
+
+ public:
+- MatrixOpWrapper(MatrixImplType& rMat, T const & aOp):
++ MatrixOpWrapper(MatrixImplType& rMat, const T& aOp):
+ mrMat(rMat),
+ pos(rMat.position(0,0)),
+- maOp(aOp)
++ mpOp(&aOp)
+ {
+ }
+
++ MatrixOpWrapper( const MatrixOpWrapper& r ) : mrMat(r.mrMat), pos(r.pos), mpOp(r.mpOp) {}
++
++ MatrixOpWrapper& operator= ( const MatrixOpWrapper& r )
++ {
++ mrMat = r.mrMat;
++ pos = r.pos;
++ mpOp = r.mpOp;
++ return *this;
++ }
++
+ void operator()(const MatrixImplType::element_block_node_type& node)
+ {
+ switch (node.type)
+@@ -2349,7 +2445,7 @@ public:
+
+ block_type::const_iterator it = block_type::begin(*node.data);
+ block_type::const_iterator itEnd = block_type::end(*node.data);
+- MatrixIteratorWrapper<block_type, T, typename T::number_value_type> aFunc(it, itEnd, maOp);
++ MatrixIteratorWrapper<block_type, T, typename T::number_value_type> aFunc(it, itEnd, *mpOp);
+ pos = mrMat.set(pos,aFunc.begin(), aFunc.end());
+ }
+ break;
+@@ -2360,7 +2456,7 @@ public:
+ block_type::const_iterator it = block_type::begin(*node.data);
+ block_type::const_iterator itEnd = block_type::end(*node.data);
+
+- MatrixIteratorWrapper<block_type, T, typename T::number_value_type> aFunc(it, itEnd, maOp);
++ MatrixIteratorWrapper<block_type, T, typename T::number_value_type> aFunc(it, itEnd, *mpOp);
+ pos = mrMat.set(pos, aFunc.begin(), aFunc.end());
+ }
+ break;
+@@ -2371,17 +2467,17 @@ public:
+ block_type::const_iterator it = block_type::begin(*node.data);
+ block_type::const_iterator itEnd = block_type::end(*node.data);
+
+- MatrixIteratorWrapper<block_type, T, typename T::number_value_type> aFunc(it, itEnd, maOp);
++ MatrixIteratorWrapper<block_type, T, typename T::number_value_type> aFunc(it, itEnd, *mpOp);
+ pos = mrMat.set(pos, aFunc.begin(), aFunc.end());
+ }
+ break;
+ case mdds::mtm::element_empty:
+ {
+- if (maOp.useFunctionForEmpty())
++ if (mpOp->useFunctionForEmpty())
+ {
+ std::vector<char> aVec(node.size);
+ MatrixIteratorWrapper<std::vector<char>, T, typename T::number_value_type>
+- aFunc(aVec.begin(), aVec.end(), maOp);
++ aFunc(aVec.begin(), aVec.end(), *mpOp);
+ pos = mrMat.set(pos, aFunc.begin(), aFunc.end());
+ }
+ }
+@@ -2397,14 +2493,14 @@ template<typename T>
+ void ScMatrixImpl::ApplyOperation(T aOp, ScMatrixImpl& rMat)
+ {
+ MatrixOpWrapper<T> aFunc(rMat.maMat, aOp);
+- maMat.walk(aFunc);
++ aFunc = maMat.walk(aFunc);
+ }
+
+ template<typename T>
+-std::vector<ScMatrix::IterateResult> ScMatrixImpl::ApplyCollectOperation(bool bTextAsZero, const std::vector<std::unique_ptr<T>>& aOp)
++std::vector<ScMatrix::IterateResult> ScMatrixImpl::ApplyCollectOperation(const std::vector<std::unique_ptr<T>>& aOp)
+ {
+- WalkElementBlocksMultipleValues<T> aFunc(bTextAsZero, aOp);
+- maMat.walk(aFunc);
++ WalkElementBlocksMultipleValues<T> aFunc(aOp);
++ aFunc = maMat.walk(std::move(aFunc));
+ return aFunc.getResult();
+ }
+
+@@ -2544,8 +2640,10 @@ void ScMatrixImpl::ExecuteOperation(const std::pair<size_t, size_t>& rStartPos,
+ {
+ WalkElementBlockOperation aFunc(maMat.size().row,
+ aDoubleFunc, aBoolFunc, aStringFunc, aEmptyFunc);
+- maMat.walk(aFunc, MatrixImplType::size_pair_type(rStartPos.first, rStartPos.second),
+- MatrixImplType::size_pair_type(rEndPos.first, rEndPos.second));
++ aFunc = maMat.walk(
++ aFunc,
++ MatrixImplType::size_pair_type(rStartPos.first, rStartPos.second),
++ MatrixImplType::size_pair_type(rEndPos.first, rEndPos.second));
+ }
+
+ #if DEBUG_MATRIX
+@@ -3452,9 +3550,9 @@ void ScFullMatrix::ExecuteOperation(const std::pair<size_t, size_t>& rStartPos,
+ pImpl->ExecuteOperation(rStartPos, rEndPos, aDoubleFunc, aBoolFunc, aStringFunc, aEmptyFunc);
+ }
+
+-std::vector<ScMatrix::IterateResult> ScFullMatrix::Collect(bool bTextAsZero, const std::vector<std::unique_ptr<sc::op::Op>>& aOp)
++std::vector<ScMatrix::IterateResult> ScFullMatrix::Collect(const std::vector<std::unique_ptr<sc::op::Op>>& aOp)
+ {
+- return pImpl->ApplyCollectOperation(bTextAsZero, aOp);
++ return pImpl->ApplyCollectOperation(aOp);
+ }
+
+ ScFullMatrix& ScFullMatrix::operator+= ( const ScFullMatrix& r )
+@@ -4216,10 +4314,10 @@ void ScVectorRefMatrix::PowOp(bool bFlag, double fVal, ScMatrix& rMat)
+ mpFullMatrix->PowOp(bFlag, fVal, rMat);
+ }
+
+-std::vector<ScMatrix::IterateResult> ScVectorRefMatrix::Collect(bool bTextAsZero, const std::vector<std::unique_ptr<sc::op::Op>>& aOp)
++std::vector<ScMatrix::IterateResult> ScVectorRefMatrix::Collect(const std::vector<std::unique_ptr<sc::op::Op>>& aOp)
+ {
+ ensureFullMatrix();
+- return mpFullMatrix->Collect(bTextAsZero, aOp);
++ return mpFullMatrix->Collect(aOp);
+ }
+
+ void ScVectorRefMatrix::ExecuteOperation(const std::pair<size_t, size_t>& rStartPos,
+--
+2.17.1
+
--- /dev/null
+diff --git a/swext/mediawiki/src/registry/data/org/openoffice/Office/OptionsDialog.xcu b/swext/mediawiki/src/registry/data/org/openoffice/Office/OptionsDialog.xcu
+index 2b35ced08f31..0c96070dd4f0 100644
+--- a/swext/mediawiki/src/registry/data/org/openoffice/Office/OptionsDialog.xcu
++++ b/swext/mediawiki/src/registry/data/org/openoffice/Office/OptionsDialog.xcu
+@@ -18,9 +18,9 @@
+ -->
+ <oor:component-data oor:name="OptionsDialog" oor:package="org.openoffice.Office" xmlns:oor="http://openoffice.org/2001/registry">
+ <node oor:name="Nodes">
+- <node oor:name="Internet" oor:op="fuse">
++ <node oor:name="Internet" oor:op="replace">
+ <node oor:name="Leaves">
+- <node oor:name="com.sun.star.wiki.options" oor:op="fuse">
++ <node oor:name="com.sun.star.wiki.options" oor:op="replace">
+ <prop oor:name="Id">
+ <value>com.sun.wiki-publisher</value>
+ </prop>
+diff --git a/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Filter.xcu b/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Filter.xcu
+index 3309b503824c..261e470b253b 100644
+--- a/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Filter.xcu
++++ b/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Filter.xcu
+@@ -19,7 +19,7 @@
+ <!DOCTYPE oor:component-data SYSTEM "../../../../../../../../officecfg/registry/component-update.dtd">
+ <oor:component-data xmlns:oor="http://openoffice.org/2001/registry" xmlns:xs="http://www.w3.org/2001/XMLSchema" oor:package="org.openoffice.TypeDetection" oor:name="Filter">
+ <node oor:name="Filters">
+- <node oor:name="MediaWiki" oor:op="fuse">
++ <node oor:name="MediaWiki" oor:op="replace">
+ <prop oor:name="FileFormatVersion"><value>0</value></prop>
+ <prop oor:name="Type"><value>MediaWiki</value></prop>
+ <prop oor:name="DocumentService"><value>com.sun.star.text.TextDocument</value></prop>
+@@ -31,7 +31,7 @@
+ </prop>
+ <prop oor:name="Flags"><value>EXPORT ALIEN 3RDPARTYFILTER</value></prop>
+ </node>
+- <node oor:name="MediaWiki_Web" oor:op="fuse">
++ <node oor:name="MediaWiki_Web" oor:op="replace">
+ <prop oor:name="FileFormatVersion"><value>0</value></prop>
+ <prop oor:name="Type"><value>MediaWiki</value></prop>
+ <prop oor:name="DocumentService"><value>com.sun.star.text.WebDocument</value></prop>
+diff --git a/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Types.xcu b/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Types.xcu
+index 15e4f850041a..ce7cd0763b79 100644
+--- a/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Types.xcu
++++ b/swext/mediawiki/src/registry/data/org/openoffice/TypeDetection/Types.xcu
+@@ -19,7 +19,7 @@
+ <!DOCTYPE oor:component-data SYSTEM "../../../../../../../../officecfg/registry/component-update.dtd">
+ <oor:component-data xmlns:oor="http://openoffice.org/2001/registry" xmlns:xs="http://www.w3.org/2001/XMLSchema" oor:package="org.openoffice.TypeDetection" oor:name="Types">
+ <node oor:name="Types">
+- <node oor:name="MediaWiki" oor:op="fuse">
++ <node oor:name="MediaWiki" oor:op="replace">
+ <prop oor:name="DetectService"><value>com.sun.star.comp.filters.XMLFilterDetect</value></prop>
+ <prop oor:name="URLPattern"/>
+ <prop oor:name="Extensions"><value>txt</value></prop>
--- /dev/null
+diff --git a/jvmfwk/plugins/sunmajor/javaenvsetup/javaldx.cxx b/jvmfwk/plugins/sunmajor/javaenvsetup/javaldx.cxx
+index 718902caba6f..3c8499b5a42c 100644
+--- a/jvmfwk/plugins/sunmajor/javaenvsetup/javaldx.cxx
++++ b/jvmfwk/plugins/sunmajor/javaenvsetup/javaldx.cxx
+@@ -141,6 +141,9 @@ static bool findAndSelect(JavaInfo ** ppInfo)
+ if (errcode == JFW_E_NO_JAVA_FOUND)
+ {
+ fprintf(stderr,"javaldx: Could not find a Java Runtime Environment!\n");
++ fprintf(stderr,"Please ensure that a JVM and the package libreoffice-java-common\n");
++ fprintf(stderr,"is installed.\n");
++ fprintf(stderr,"If it is already installed then try removing ~/.config/libreoffice/4/user/config/javasettings_Linux_*.xml\n");
+ return false;
+ }
+ else if (errcode != JFW_E_NONE && errcode != JFW_E_DIRECT_MODE)
+diff --git a/include/svtools/strings.hrc b/include/svtools/strings.hrc
+index f9dc617f4313..874b0400cbc5 100644
+--- a/include/svtools/strings.hrc
++++ b/include/svtools/strings.hrc
+@@ -281,13 +281,13 @@
+
+ #define STR_SVT_DEFAULT_SERVICE_LABEL NC_("STR_SVT_DEFAULT_SERVICE_LABEL", "$user$'s $service$")
+
+-#define STR_WARNING_JAVANOTFOUND NC_("STR_WARNING_JAVANOTFOUND", "%PRODUCTNAME requires a Java runtime environment (JRE) to perform this task. Please install a JRE and restart %PRODUCTNAME.")
++#define STR_WARNING_JAVANOTFOUND NC_("STR_WARNING_JAVANOTFOUND", "%PRODUCTNAME requires a Java runtime environment (JRE) to perform this task. Please install a JRE (and libreoffice-java-common) and restart %PRODUCTNAME.")
+ #define STR_WARNING_JAVANOTFOUND_WIN NC_("STR_WARNING_JAVANOTFOUND_WIN", "%PRODUCTNAME requires a %BITNESS-bit Java runtime environment (JRE) to perform this task. Please install a JRE and restart %PRODUCTNAME.")
+ #define STR_WARNING_JAVANOTFOUND_MAC NC_("STR_WARNING_JAVANOTFOUND_MAC", "%PRODUCTNAME requires Oracle's Java Development Kit (JDK) on Mac OS X 10.10 or greater to perform this task. Please install them and restart %PRODUCTNAME.")
+ #define STR_WARNING_INVALIDJAVASETTINGS_MAC NC_("STR_WARNING_INVALIDJAVASETTINGS_MAC", "The %PRODUCTNAME configuration has been changed. Under %PRODUCTNAME - Preferences - %PRODUCTNAME - Advanced, select the Java runtime environment you want to have used by %PRODUCTNAME.")
+-#define STR_WARNING_INVALIDJAVASETTINGS NC_("STR_WARNING_INVALIDJAVASETTINGS", "The %PRODUCTNAME configuration has been changed. Under Tools - Options - %PRODUCTNAME - Advanced, select the Java runtime environment you want to have used by %PRODUCTNAME.")
++#define STR_WARNING_INVALIDJAVASETTINGS NC_("STR_WARNING_INVALIDJAVASETTINGS", "The %PRODUCTNAME configuration has been changed. Under Tools - Options - %PRODUCTNAME - Advanced, select the Java runtime environment you want to have used by %PRODUCTNAME. Maybe you also need to install libreoffice-java-common.")
+ #define STR_ERROR_JVMCREATIONFAILED_MAC NC_("STR_ERROR_JVMCREATIONFAILED_MAC", "%PRODUCTNAME requires a Java runtime environment (JRE) to perform this task. The selected JRE is defective. Please select another version or install a new JRE and select it under %PRODUCTNAME - Preferences - %PRODUCTNAME - Advanced.")
+-#define STR_ERROR_JVMCREATIONFAILED NC_("STR_ERROR_JVMCREATIONFAILED", "%PRODUCTNAME requires a Java runtime environment (JRE) to perform this task. The selected JRE is defective. Please select another version or install a new JRE and select it under Tools - Options - %PRODUCTNAME - Advanced.")
++#define STR_ERROR_JVMCREATIONFAILED NC_("STR_ERROR_JVMCREATIONFAILED", "%PRODUCTNAME requires a Java runtime environment (JRE) to perform this task. The selected JRE is defective. Please select another version or install a new JRE and select it under Tools - Options - %PRODUCTNAME - Advanced or install libreoffice-java-common if not already installed.")
+ #define STR_WARNING_JAVANOTFOUND_TITLE NC_("STR_WARNING_JAVANOTFOUND_TITLE", "JRE Required")
+ #define STR_WARNING_INVALIDJAVASETTINGS_TITLE NC_("STR_WARNING_INVALIDJAVASETTINGS_TITLE", "Select JRE")
+ #define STR_ERROR_JVMCREATIONFAILED_TITLE NC_("STR_ERROR_JVMCREATIONFAILED_TITLE", "JRE is Defective")
--- /dev/null
+diff --git a/external/mysql-connector-cpp/Library_mysql-connector-cpp.mk b/external/mysql-connector-cpp/Library_mysql-connector-cpp.mk
+index 1670de8..c5bab4f 100644
+--- a/external/mysql-connector-cpp/Library_mysqlcppconn.mk
++++ b/external/mysql-connector-cpp/Library_mysqlcppconn.mk
+@@ -80,4 +80,8 @@ $(eval $(call gb_Library_add_generated_exception_objects,mysql-connector-cpp,\
+ UnpackedTarball/mysql-connector-cpp/driver/nativeapi/mysql_native_statement_wrapper \
+ ))
+
++$(eval $(call gb_Library_add_cflags,mysql-connector-cpp,\
++ -DLIBMYSQLCLIENT_SONAME=\"$(shell readlink -f `mysql_config --variable=pkglibdir`/libmysqlclient_r.so | sed -e s/mysqlclient/mysqlclient_r/ | sed -e "s,`mysql_config --variable=pkglibdir`/\(libmysqlclient_r.so.[0-9][0-9]\).*,\\1,")\" \
++))
++
+ # vim: set noet sw=4 ts=4:
+--- a/external/mysql-connector-cpp/patches/mysql-connector-c++-1.1.0-SONAME.patch 2013-02-08 21:20:25.249889678 +0100
++++ b/external/mysql-connector-cpp/patches/mysql-connector-c++-1.1.0-SONAME.patch 2013-02-26 22:48:27.030275718 +0100
+@@ -0,0 +1,12 @@
++diff -urNad mysql-connector-c++-1.0.6~r754~/driver/nativeapi/libmysql_dynamic_proxy.cpp mysql-connector-c++-1.0.6~r754/driver/nativeapi/libmysql_dynamic_proxy.cpp
++--- misc/mysql-connector-c++-1.1.0/driver/nativeapi/libmysql_dynamic_proxy.cpp 2009-08-20 16:42:14.000000000 +0200
+++++ misc/build/mysql-connector-c++-1.1.0/driver/nativeapi/libmysql_dynamic_proxy.cpp 2009-08-20 20:25:31.000000000 +0200
++@@ -26,7 +26,7 @@
++ #elif defined(__hpux) && defined(__hppa)
++ static const char * const baseName = "libmysqlclient_r.sl";
++ #else
++-static const char * const baseName = "libmysqlclient_r.so";
+++static const char * const baseName = LIBMYSQLCLIENT_SONAME;
++ #endif
++
++ template<typename FunctionType>
+diff --git a/external/mysql-connector-cpp/UnpackedTarball_mysql-connector-cpp.mk b/external/mysql-connector-cpp/UnpackedTarball_mysql-connector-cpp.mk
+index 82a368460747..03d0a8b05057 100644
+--- a/external/mysql-connector-cpp/UnpackedTarball_mysql-connector-cpp.mk
++++ b/external/mysql-connector-cpp/UnpackedTarball_mysql-connector-cpp.mk
+@@ -18,6 +18,7 @@ $(eval $(call gb_UnpackedTarball_add_file,mysql-connector-cpp,driver/nativeapi/b
+
+ $(eval $(call gb_UnpackedTarball_add_patches,mysql-connector-cpp,\
+ external/mysql-connector-cpp/patches/mysql-connector-c++-1.1.0.patch \
++ external/mysql-connector-cpp/patches/mysql-connector-c++-1.1.0-SONAME.patch \
+ external/mysql-connector-cpp/patches/warnings.patch.0 \
+ external/mysql-connector-cpp/patches/enable-libmysql-proxy.patch \
+ external/mysql-connector-cpp/patches/dynexcspec.patch.0 \
--- /dev/null
+From 0b583faeb72ce5391542923fa073e65f17e5448c Mon Sep 17 00:00:00 2001
+From: Rene Engelhard <rene@rene-engelhard.de>
+Date: Wed, 23 May 2018 17:30:04 +0200
+Subject: [PATCH] micro-optimization: do not check for ant if we don't need it
+
+Change-Id: I84644cddd8a318a2af23780ada9afc26fe23a9fe
+---
+ configure.ac | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/configure.ac b/configure.ac
+index 95e2865017a8..4cc9c1f68b8e 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -8503,6 +8503,7 @@ if test "$with_java" != "no"; then
+ AC_MSG_RESULT([internal])
+ SYSTEM_HSQLDB=
+ BUILD_TYPE="$BUILD_TYPE HSQLDB"
++ NEED_ANT=TRUE
+ AC_MSG_CHECKING([whether hsqldb should be built with JDBC 4.1])
+ javanumver=`$JAVAINTERPRETER -version 2>&1 | $AWK -v num=true -f $SRC_ROOT/solenv/bin/getcompver.awk`
+ if expr "$javanumver" '>=' 000100060000 > /dev/null; then
+@@ -10619,6 +10620,7 @@ if test "$enable_report_builder" != "no" -a "$with_java" != "no"; then
+ AC_MSG_RESULT([internal])
+ SYSTEM_JFREEREPORT=
+ BUILD_TYPE="$BUILD_TYPE JFREEREPORT"
++ NEED_ANT=TRUE
+ fi
+ else
+ AC_MSG_RESULT([no])
+@@ -10662,6 +10664,7 @@ if test "$ENABLE_REPORTBUILDER" = "TRUE"; then
+ AC_MSG_RESULT([internal])
+ SYSTEM_APACHE_COMMONS=
+ BUILD_TYPE="$BUILD_TYPE APACHE_COMMONS"
++ NEED_ANT=TRUE
+ fi
+ fi
+ AC_SUBST(SYSTEM_APACHE_COMMONS)
+@@ -10724,6 +10727,7 @@ if test "${enable_scripting_javascript}" != "no" -a "x$with_java" != "xno"; then
+ AC_MSG_RESULT([internal])
+ SYSTEM_RHINO=
+ BUILD_TYPE="$BUILD_TYPE RHINO"
++ NEED_ANT=TRUE
+ fi
+ else
+ AC_MSG_RESULT([no])
+@@ -11640,7 +11644,7 @@ dnl ===================================================================
+ dnl Test for the presence of Ant and that it works
+ dnl ===================================================================
+
+-if test "$ENABLE_JAVA" != ""; then
++if test "$ENABLE_JAVA" != "" -a "$NEED_ANT" = "TRUE"; then
+ ANT_HOME=; export ANT_HOME
+ WITH_ANT_HOME=; export WITH_ANT_HOME
+ if test -z "$with_ant_home" -a -n "$LODE_HOME" ; then
+--
+2.17.0
+
--- /dev/null
+--- a/Makefile.in 2017-07-28 06:09:37.072183489 +0000
++++ b/Makefile.in 2017-10-18 12:43:59.215567467 +0000
+@@ -57,14 +57,6 @@ else # MAKE_RESTARTS
+
+ all: build
+
+-check-if-root:
+- @if test ! `uname` = 'Haiku' -a `id -u` = 0 && ! grep -q 'lxc\|docker' /proc/self/cgroup; then \
+- echo; \
+- echo 'No. You make ME a sandwich.'; \
+- echo; \
+- exit 1; \
+- fi
+-
+ gb_Side ?= host
+
+ include $(BUILDDIR)/config_$(gb_Side).mk
+@@ -252,7 +244,7 @@ endif
+ #
+ # Bootstrap
+ #
+-bootstrap: check-if-root compilerplugins
++bootstrap: compilerplugins
+
+ #
+ # Build
--- /dev/null
+don't add -lssl etc if not needed (because we use system-postgresql)
+
+diff --git a/RepositoryExternal.mk b/RepositoryExternal.mk
+index 0fc7d25..952b140 100644
+--- a/RepositoryExternal.mk
++++ b/RepositoryExternal.mk
+@@ -2911,9 +2917,10 @@ $(call gb_LinkTarget_add_libs,$(1),\
+ $(call gb_UnpackedTarball_get_dir,postgresql)/src/interfaces/libpq/libpq$(gb_StaticLibrary_PLAINEXT) \
+ )
+
+-ifeq ($(OS),WNT)
+ $(call gb_LinkTarget_use_external,$(1),openssl)
+
++ifeq ($(OS),WNT)
++
+ $(call gb_LinkTarget_use_system_win32_libs,$(1),\
+ secur32 \
+ ws2_32 \
+diff --git a/connectivity/Library_postgresql-sdbc-impl.mk b/connectivity/Library_postgresql-sdbc-impl.mk
+index 0580a8b..7e8b778 100644
+--- a/connectivity/Library_postgresql-sdbc-impl.mk
++++ b/connectivity/Library_postgresql-sdbc-impl.mk
+@@ -46,7 +46,6 @@ $(eval $(call gb_Library_use_externals,postgresql-sdbc-impl,\
+ boost_headers \
+ postgresql \
+ $(if $(filter-out MSC,$(COM)), \
+- openssl \
+ openldap \
+ nss3 \
+ plc4 \
+
+... and don't uselessly check for openssl in configure
+
+diff --git a/config_host.mk.in b/config_host.mk.in
+index ddd144e..19f8368 100644
+--- a/config_host.mk.in
++++ b/config_host.mk.in
+@@ -93,7 +93,6 @@ export DEFAULT_BRAND_IMAGES=@DEFAULT_BRAND_IMAGES@
+ export DICT_SYSTEM_DIR=@DICT_SYSTEM_DIR@
+ export DISABLE_CVE_TESTS=@DISABLE_CVE_TESTS@
+ export DISABLE_DYNLOADING=@DISABLE_DYNLOADING@
+-export DISABLE_OPENSSL=@DISABLE_OPENSSL@
+ export DISABLE_PYTHON=@DISABLE_PYTHON@
+ export DLOPEN_LIBS=@DLOPEN_LIBS@
+ export DLLTOOL=@DLLTOOL@
+@@ -438,8 +439,6 @@ export OOO_JUNIT_JAR=@OOO_JUNIT_JAR@
+ export BFFVALIDATOR=@BFFVALIDATOR@
+ export OOO_JUNIT_JAR=@OOO_JUNIT_JAR@
+ export OOO_VENDOR=@OOO_VENDOR@
+-export OPENSSL_CFLAGS=$(gb_SPACE)@OPENSSL_CFLAGS@
+-export OPENSSL_LIBS=$(gb_SPACE)@OPENSSL_LIBS@
+ export OPENSYMBOL_TTF=@OPENSYMBOL_TTF@
+ export ORCUS_CFLAGS=$(gb_SPACE)@ORCUS_CFLAGS@
+ export ORCUS_LIBS=$(gb_SPACE)@ORCUS_LIBS@
+@@ -569,7 +568,6 @@ export SYSTEM_ODBC_HEADERS=@SYSTEM_ODBC_HEADERS@
+ export SYSTEM_ODBC_HEADERS=@SYSTEM_ODBC_HEADERS@
+ export SYSTEM_ODFGEN=@SYSTEM_ODFGEN@
+ export SYSTEM_OPENLDAP=@SYSTEM_OPENLDAP@
+-export SYSTEM_OPENSSL=@SYSTEM_OPENSSL@
+ export SYSTEM_PAGEMAKER=@SYSTEM_PAGEMAKER@
+ export SYSTEM_POPPLER=@SYSTEM_POPPLER@
+ export SYSTEM_POSTGRESQL=@SYSTEM_POSTGRESQL@
+diff --git a/configure.ac b/configure.ac
+index 3862386..45d5e25 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -9422,67 +9422,6 @@ else
+ AC_MSG_RESULT([no])
+ fi
+
+-dnl ===================================================================
+-dnl Check for system openssl
+-dnl ===================================================================
+-DISABLE_OPENSSL=
+-AC_MSG_CHECKING([whether to disable OpenSSL usage])
+-if test "$enable_openssl" = "yes"; then
+- AC_MSG_RESULT([no])
+- if test "$_os" = Darwin ; then
+- # OpenSSL is deprecated when building for 10.7 or later.
+- #
+- # http://stackoverflow.com/questions/7406946/why-is-apple-deprecating-openssl-in-macos-10-7-lion
+- # http://stackoverflow.com/questions/7475914/libcrypto-deprecated-on-mac-os-x-10-7-lion
+-
+- with_system_openssl=no
+- libo_CHECK_SYSTEM_MODULE([openssl],[OPENSSL],[openssl])
+- elif test "$_os" = "NetBSD" -o "$_os" = "OpenBSD" -o "$_os" = "DragonFly" \
+- && test "$with_system_openssl" != "no"; then
+- with_system_openssl=yes
+- SYSTEM_OPENSSL=TRUE
+- OPENSSL_CFLAGS=
+- OPENSSL_LIBS="-lssl -lcrypto"
+- else
+- libo_CHECK_SYSTEM_MODULE([openssl],[OPENSSL],[openssl])
+- fi
+- if test "$with_system_openssl" = "yes"; then
+- AC_MSG_CHECKING([whether openssl supports SHA512])
+- AC_LANG_PUSH([C])
+- AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <openssl/sha.h>]],[[
+- SHA512_CTX context;
+-]])],[AC_MSG_RESULT([yes])],[AC_MSG_ERROR([no, openssl too old. Need >= 0.9.8.])])
+- AC_LANG_POP(C)
+- fi
+-else
+- AC_MSG_RESULT([yes])
+- DISABLE_OPENSSL=TRUE
+-
+- # warn that although OpenSSL is disabled, system libraries may depend on it
+- AC_MSG_WARN([OpenSSL has been disabled. No code compiled by LibO will make use of it but system librares may create indirect dependencies])
+- add_warning "OpenSSL has been disabled. No code compiled by LibO will make use of it but system librares may create indirect dependencies"
+-fi
+-
+-AC_SUBST([DISABLE_OPENSSL])
+-
+-if test "$enable_cipher_openssl_backend" = yes && test "$DISABLE_OPENSSL" = TRUE; then
+- if test "$libo_fuzzed_enable_cipher_openssl_backend" = yes; then
+- AC_MSG_NOTICE([Resetting --enable-cipher-openssl-backend=no])
+- enable_cipher_openssl_backend=no
+- else
+- AC_MSG_ERROR([--enable-cipher-openssl-backend needs OpenSSL, but --disable-openssl was given.])
+- fi
+-fi
+-AC_MSG_CHECKING([whether to enable the OpenSSL backend for rtl/cipher.h])
+-ENABLE_CIPHER_OPENSSL_BACKEND=
+-if test "$enable_cipher_openssl_backend" = yes; then
+- AC_MSG_RESULT([yes])
+- ENABLE_CIPHER_OPENSSL_BACKEND=TRUE
+-else
+- AC_MSG_RESULT([no])
+-fi
+-AC_SUBST([ENABLE_CIPHER_OPENSSL_BACKEND])
+-
+ dnl ===================================================================
+ dnl Check for building gnutls
+ dnl ===================================================================
+
+.. and without these gbuild still wants it ...
+
+diff --git a/external/Module_external.mk b/external/Module_external.mk
+index 44280e3..44c1c63 100644
+--- a/external/Module_external.mk
++++ b/external/Module_external.mk
+@@ -82,7 +82,6 @@ $(eval $(call gb_Module_add_moduledirs,external,\
+ $(call gb_Helper_optional,NSS,nss) \
+ $(call gb_Helper_optional,ODFGEN,libodfgen) \
+ $(call gb_Helper_optional,OPENLDAP,openldap) \
+- $(call gb_Helper_optional,OPENSSL,openssl) \
+ $(call gb_Helper_optional,ORCUS,liborcus) \
+ $(call gb_Helper_optional,OWNCLOUD_ANDROID_LIB,owncloud-android-lib) \
+ $(call gb_Helper_optional,PAGEMAKER,libpagemaker) \
+diff --git a/oox/CppunitTest_oox_tokenmap.mk b/oox/CppunitTest_oox_tokenmap.mk
+index 9eac2a5..ef6d5c9 100644
+--- a/oox/CppunitTest_oox_tokenmap.mk
++++ b/oox/CppunitTest_oox_tokenmap.mk
+@@ -20,19 +20,10 @@ $(eval $(call gb_CppunitTest_use_sdk_api,oox_tokenmap))
+
+ $(eval $(call gb_CppunitTest_use_library_objects,oox_tokenmap,oox))
+
+-ifeq ($(TLS),OPENSSL)
+-$(eval $(call gb_CppunitTest_use_externals,oox_tokenmap,\
+- openssl \
+- openssl_headers \
+-))
+-else
+-ifeq ($(TLS),NSS)
+ $(eval $(call gb_CppunitTest_use_externals,oox_tokenmap,\
+ plc4 \
+ nss3 \
+ ))
+-endif
+-endif
+
+ $(eval $(call gb_CppunitTest_use_libraries,oox_tokenmap,\
+ avmedia \
+diff --git a/oox/Library_oox.mk b/oox/Library_oox.mk
+index fcd7215..a178883 100644
+--- a/oox/Library_oox.mk
++++ b/oox/Library_oox.mk
+@@ -67,19 +67,10 @@ $(eval $(call gb_Library_use_externals,oox,\
+ boost_headers \
+ ))
+
+-ifeq ($(TLS),OPENSSL)
+-$(eval $(call gb_Library_use_externals,oox,\
+- openssl \
+- openssl_headers \
+-))
+-else
+-ifeq ($(TLS),NSS)
+ $(eval $(call gb_Library_use_externals,oox,\
+ plc4 \
+ nss3 \
+ ))
+-endif
+-endif
+
+ $(eval $(call gb_Library_set_componentfile,oox,oox/util/oox))
+
+diff --git a/ucb/CppunitTest_ucb_webdav_local_neon.mk b/ucb/CppunitTest_ucb_webdav_local_neon.mk
+index 20e827b..9b869f9 100644
+--- a/ucb/CppunitTest_ucb_webdav_local_neon.mk
++++ b/ucb/CppunitTest_ucb_webdav_local_neon.mk
+@@ -34,7 +34,6 @@ $(eval $(call gb_CppunitTest_use_externals,ucb_webdav_local_neon,\
+ boost_headers \
+ libxml2 \
+ neon \
+- openssl \
+ ))
+
+ $(eval $(call gb_CppunitTest_use_custom_headers,ucb_webdav_local_neon,\
+diff --git a/ucb/Library_ucpdav1.mk b/ucb/Library_ucpdav1.mk
+index 37f3c8f..2167dd2 100644
+--- a/ucb/Library_ucpdav1.mk
++++ b/ucb/Library_ucpdav1.mk
+@@ -30,7 +30,6 @@ $(eval $(call gb_Library_use_externals,ucpdav1,\
+ boost_headers \
+ libxml2 \
+ neon \
+- openssl \
+ ))
+
+ $(eval $(call gb_Library_use_custom_headers,ucpdav1,\
+@@ -66,7 +65,6 @@ else # WITH_WEBDAV == serf
+ $(eval $(call gb_Library_use_externals,ucpdav1,\
+ boost_headers \
+ apr \
+- openssl \
+ serf \
+ zlib \
+ ))
+diff --git a/RepositoryExternal.mk b/RepositoryExternal.mk
+index 0fc7d25..fe5a208 100644
+--- a/RepositoryExternal.mk
++++ b/RepositoryExternal.mk
+@@ -1525,75 +1525,6 @@ endif # ENABLE_HARFBUZZ
+
+ ifeq ($(DISABLE_OPENSSL),TRUE)
+
+-gb_ExternalProject__use_openssl:=
+-gb_LinkTarget__use_openssl_headers:=
+-gb_LinkTarget__use_openssl:=
+-
+-else # !DISABLE_OPENSSL
+-
+-ifneq ($(SYSTEM_OPENSSL),)
+-
+-gb_LinkTarget__use_openssl_headers:=
+-gb_ExternalProject__use_openssl:=
+-
+-define gb_LinkTarget__use_openssl
+-$(call gb_LinkTarget_set_include,$(1),\
+- $$(INCLUDE) \
+- $(OPENSSL_CFLAGS) \
+-)
+-$(call gb_LinkTarget_add_libs,$(1),$(OPENSSL_LIBS))
+-
+-endef
+-
+-else # !SYSTEM_OPENSSL
+-
+-$(eval $(call gb_Helper_register_packages_for_install,ooo, \
+- openssl \
+-))
+-
+-define gb_ExternalProject__use_openssl
+-$(call gb_ExternalProject_use_package,$(1),openssl)
+-
+-endef
+-
+-define gb_LinkTarget__use_openssl_headers
+-$(call gb_LinkTarget_use_external_project,$(1),openssl)
+-$(call gb_LinkTarget_set_include,$(1),\
+- -I$(call gb_UnpackedTarball_get_dir,openssl)/include \
+- $$(INCLUDE) \
+-)
+-
+-endef
+-
+-define gb_LinkTarget__use_openssl
+-$(call gb_LinkTarget_use_package,$(1),openssl)
+-ifeq ($(OS),WNT)
+-$(call gb_LinkTarget_add_libs,$(1),\
+- $(call gb_UnpackedTarball_get_dir,openssl)/out32dll/ssleay32.lib \
+- $(call gb_UnpackedTarball_get_dir,openssl)/out32dll/libeay32.lib \
+-)
+-else
+-$(call gb_LinkTarget_add_libs,$(1),\
+- $(call gb_UnpackedTarball_get_dir,openssl)/libssl.a \
+- $(call gb_UnpackedTarball_get_dir,openssl)/libcrypto.a \
+-)
+-$(call gb_LinkTarget_use_external_project,$(1),openssl)
+-ifeq ($(OS),SOLARIS)
+-$(call gb_LinkTarget_add_libs,$(1),\
+- -lnsl \
+- -lsocket \
+-)
+-endif
+-endif
+-
+-endef
+-
+-endif # SYSTEM_OPENSSL
+-endif # DISABLE_OPENSSL
+-
+-
+-ifeq ($(DISABLE_OPENSSL),TRUE)
+-
+ define gb_LinkTarget__use_gnutls
+ $(call gb_LinkTarget_set_include,$(1),\
+ $$(INCLUDE) \
+diff --git a/ucb/CppunitTest_ucb_webdav_neon_opts.mk b/ucb/CppunitTest_ucb_webdav_neon_opts.mk
+index 91e167b..21e5257 100644
+--- a/ucb/CppunitTest_ucb_webdav_neon_opts.mk
++++ b/ucb/CppunitTest_ucb_webdav_neon_opts.mk
+@@ -34,7 +34,6 @@ $(eval $(call gb_CppunitTest_use_externals,ucb_webdav_neon_opts,\
+ boost_headers \
+ libxml2 \
+ neon \
+- openssl \
+ ))
+
+ $(eval $(call gb_CppunitTest_use_custom_headers,ucb_webdav_neon_opts,\
+diff --git a/ucb/CppunitTest_ucb_webdav_propfindcache.mk b/ucb/CppunitTest_ucb_webdav_propfindcache.mk
+index ebbaee7..e2d064e 100644
+--- a/ucb/CppunitTest_ucb_webdav_propfindcache.mk
++++ b/ucb/CppunitTest_ucb_webdav_propfindcache.mk
+@@ -34,7 +34,6 @@ $(eval $(call gb_CppunitTest_use_externals,ucb_webdav_propfindcache,\
+ boost_headers \
+ libxml2 \
+ neon \
+- openssl \
+ ))
+
+ $(eval $(call gb_CppunitTest_use_custom_headers,ucb_webdav_propfindcache,\
+diff --git a/ucb/CppunitTest_ucb_webdav_res_access.mk b/ucb/CppunitTest_ucb_webdav_res_access.mk
+index ac48f87..c7d151e 100644
+--- a/ucb/CppunitTest_ucb_webdav_res_access.mk
++++ b/ucb/CppunitTest_ucb_webdav_res_access.mk
+@@ -34,7 +34,6 @@ $(eval $(call gb_CppunitTest_use_externals,ucb_webdav_res_access,\
+ boost_headers \
+ libxml2 \
+ neon \
+- openssl \
+ ))
+
+ $(eval $(call gb_CppunitTest_use_custom_headers,ucb_webdav_res_access,\
--- /dev/null
+From 1c2296a3809ff9ef36564eff3abdf4c191a1d1c6 Mon Sep 17 00:00:00 2001
+From: Rene Engelhard <rene@debian.org>
+Date: Sun, 21 Feb 2016 02:20:43 +0100
+Subject: [PATCH] Revert "always support packagekit if dbus is enabled"
+
+This reverts commit f2984e95740cfbb9c74574f2a1225af3411d4901.
+---
+ RepositoryExternal.mk | 6 ++++++
+ config_host.mk.in | 1 +
+ configure.ac | 22 +++++++++++++++++++++-
+ vcl/inc/unx/fontmanager.hxx | 4 ++--
+ vcl/unx/generic/fontmanager/fontconfig.cxx | 8 ++++----
+ vcl/unx/generic/fontmanager/fontmanager.cxx | 2 +-
+ 6 files changed, 35 insertions(+), 8 deletions(-)
+
+diff --git a/RepositoryExternal.mk b/RepositoryExternal.mk
+index d0ee166..fd20bfd 100644
+--- a/RepositoryExternal.mk
++++ b/RepositoryExternal.mk
+@@ -2537,6 +2537,12 @@ $(call gb_LinkTarget_set_include,$(1),\
+ $(DBUS_CFLAGS) \
+ )
+
++ifeq ($(ENABLE_PACKAGEKIT),TRUE)
++$(call gb_LinkTarget_add_defs,$(1),\
++ -DENABLE_PACKAGEKIT \
++)
++endif # ENABLE_PACKAGEKIT
++
+ $(call gb_LinkTarget_add_libs,$(1),\
+ $(DBUS_LIBS) \
+ )
+diff --git a/config_host.mk.in b/config_host.mk.in
+index 6170227..2721820 100644
+--- a/config_host.mk.in
++++ b/config_host.mk.in
+@@ -153,6 +153,7 @@
+ export ENABLE_OPENGL_TRANSITIONS=@ENABLE_OPENGL_TRANSITIONS@
+ export ENABLE_OPENGL_CANVAS=@ENABLE_OPENGL_CANVAS@
+ export ENABLE_OPTIMIZED=@ENABLE_OPTIMIZED@
++export ENABLE_PACKAGEKIT=@ENABLE_PACKAGEKIT@
+ export ENABLE_PCH=@ENABLE_PCH@
+ export ENABLE_PDFIMPORT=@ENABLE_PDFIMPORT@
+ export ENABLE_PDFIUM=@ENABLE_PDFIUM@
+diff --git a/configure.ac b/configure.ac
+index b6f6f37..c6a9b7d 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -1216,9 +1216,15 @@ AC_ARG_ENABLE(cairo-canvas,
+ libo_FUZZ_ARG_ENABLE(dbus,
+ AS_HELP_STRING([--disable-dbus],
+ [Determines whether to enable features that depend on dbus.
+- e.g. Presentation mode screensaver control, bluetooth presentation control, automatic font install]),
++ e.g. Presentation mode screensaver control, bluetooth presentation control]),
+ ,test "${enable_dbus+set}" = set || enable_dbus=yes)
+
++AC_ARG_ENABLE(packagekit,
++ AS_HELP_STRING([--enable-packagekit],
++ [Determines whether to enable features using packagekit.
++ Right now that is auto font install]),
++,)
++
+ libo_FUZZ_ARG_ENABLE(sdremote,
+ AS_HELP_STRING([--disable-sdremote],
+ [Determines whether to enable Impress remote control (i.e. the server component).]),
+@@ -10046,6 +10052,20 @@ AC_SUBST(ENABLE_DBUS)
+ AC_SUBST(DBUS_CFLAGS)
+ AC_SUBST(DBUS_LIBS)
+
++AC_MSG_CHECKING([whether to enable font install via packagekit])
++if test "$ENABLE_DBUS" = "TRUE"; then
++ if test -n "$enable_packagekit" -a "$enable_packagekit" != "no"; then
++ ENABLE_PACKAGEKIT=TRUE
++ AC_MSG_RESULT([yes])
++ else
++ ENABLE_PACKAGEKIT=
++ AC_MSG_RESULT([no])
++ fi
++else
++ AC_MSG_RESULT([no, dbus disabled.])
++fi
++AC_SUBST(ENABLE_PACKAGEKIT)
++
+ AC_MSG_CHECKING([whether to enable Impress remote control])
+ if test -n "$enable_sdremote" -a "$enable_sdremote" != "no"; then
+ AC_MSG_RESULT([yes])
+diff --git a/Repository.mk b/Repository.mk
+index 858be89..901085e 100644
+--- a/Repository.mk
++++ b/Repository.mk
+@@ -289,7 +289,7 @@ $(eval $(call gb_Helper_register_libraries_for_install,OOOLIBS,gnome, \
+ $(if $(ENABLE_EVOAB2),evoab) \
+ $(if $(ENABLE_GTK),vclplug_gtk) \
+ $(if $(ENABLE_GTK3),vclplug_gtk3) \
+- $(if $(ENABLE_GIO),losessioninstall) \
++ $(if $(ENABLE_PACKAGEKIT),losessioninstall) \
+ $(if $(ENABLE_GIO),ucpgio1) \
+ ))
+
+diff --git a/sfx2/source/appl/appserv.cxx b/sfx2/source/appl/appserv.cxx
+index f467783..b48e763 100644
+--- a/sfx2/source/appl/appserv.cxx
++++ b/sfx2/source/appl/appserv.cxx
+@@ -159,6 +159,7 @@ namespace
+ // make sure we actually can instantiate services from base first
+ if(!lcl_isBaseAvailable())
+ {
++#if defined (ENABLE_PACKAGEKIT)
+ try
+ {
+ using namespace org::freedesktop::PackageKit;
+@@ -176,8 +177,16 @@ namespace
+ SAL_INFO(
+ "sfx.appl",
+ "trying to install LibreOffice Base, caught " << e);
++#else
++ SAL_INFO(
++ "sfx.appl",
++ "missing LibreOffice Base");
++
++#endif
++#if defined (ENABLE_PACKAGEKIT)
+ }
+ return;
++#endif
+ }
+
+ try // fdo#48775
+diff --git a/shell/Module_shell.mk b/shell/Module_shell.mk
+index 17661e9..99becfd 100644
+--- a/shell/Module_shell.mk
++++ b/shell/Module_shell.mk
+@@ -16,11 +16,13 @@ $(eval $(call gb_Module_add_targets,shell,\
+
+ ifneq ($(filter DRAGONFLY FREEBSD LINUX NETBSD OPENBSD,$(OS)),)
+ ifeq ($(ENABLE_GIO),TRUE)
++ifeq ($(ENABLE_PACKAGEKIT),TRUE)
+ $(eval $(call gb_Module_add_targets,shell,\
+ Library_losessioninstall \
+ ))
+ endif
+ endif
++endif
+
+ ifeq ($(OS),SOLARIS)
+ ifeq ($(ENABLE_GIO),TRUE)
+diff --git a/sw/source/uibase/app/apphdl.cxx b/sw/source/uibase/app/apphdl.cxx
+index 896b365..5be6a92 100644
+--- a/sw/source/uibase/app/apphdl.cxx
++++ b/sw/source/uibase/app/apphdl.cxx
+@@ -349,6 +349,7 @@ void SwMailMergeWizardExecutor::ExecuteMailMergeWizard( const SfxItemSet * pArgs
+ {
+ if(!lcl_hasAllComponentsAvailable())
+ {
++#if defined (ENABLE_PACKAGEKIT)
+ try
+ {
+ using namespace org::freedesktop::PackageKit;
+@@ -365,8 +366,15 @@ void SwMailMergeWizardExecutor::ExecuteMailMergeWizard( const SfxItemSet * pArgs
+ SAL_INFO(
+ "sw.core",
+ "trying to install LibreOffice Base, caught " << e);
++#else
++ SAL_INFO(
++ "sw.core",
++ "missing LibreOffice Base");
++#endif
++#if defined (ENABLE_PACKAGEKIT)
+ }
+ return;
++#endif
+ }
+ if ( m_pView )
+ {
+diff --git a/postprocess/Rdb_services.mk b/postprocess/Rdb_services.mk
+index c411fc1..d540983 100644
+--- a/postprocess/Rdb_services.mk
++++ b/postprocess/Rdb_services.mk
+@@ -194,9 +194,11 @@ $(eval $(call gb_Rdb_add_components,services,\
+ canvas/source/opengl/oglcanvas \
+ ) \
+ $(if $(ENABLE_GIO), \
+- shell/source/sessioninstall/losessioninstall \
+ ucb/source/ucp/gio/ucpgio \
+ ) \
++ $(if $(ENABLE_PACKAGEKIT), \
++ shell/source/sessioninstall/losessioninstall \
++ ) \
+ $(if $(ENABLE_GSTREAMER_1_0), \
+ avmedia/source/gstreamer/avmediagstreamer \
+ ) \
+diff --git a/officecfg/registry/data/org/openoffice/Office/Common.xcu b/officecfg/registry/data/org/openoffice/Office/Common.xcu
+index 26d1ba053a1e..831e0ff7630f 100644
+--- a/officecfg/registry/data/org/openoffice/Office/Common.xcu
++++ b/officecfg/registry/data/org/openoffice/Office/Common.xcu
+@@ -533,10 +533,10 @@
+ </node>
+ <node oor:name="PackageKit">
+ <prop oor:name="EnableFontInstallation" oor:type="xs:boolean">
+- <value install:module="unx">true</value>
++ <value install:module="unx">false</value>
+ </prop>
+ <prop oor:name="EnableLangpackInstallation" oor:type="xs:boolean">
+- <value install:module="unx">true</value>
++ <value install:module="unx">false</value>
+ </prop>
+ </node>
+ <node oor:name="Classification">
+diff --git a/officecfg/registry/schema/org/openoffice/Office/Common.xcs b/officecfg/registry/schema/org/openoffice/Office/Common.xcs
+index 2884179d0800..0b8feaa84c99 100644
+--- a/officecfg/registry/schema/org/openoffice/Office/Common.xcs
++++ b/officecfg/registry/schema/org/openoffice/Office/Common.xcs
+@@ -6380,13 +6380,13 @@
+ <info>
+ <desc>Specifies if missing font installation should be triggered.</desc>
+ </info>
+- <value>true</value>
++ <value>false</value>
+ </prop>
+ <prop oor:name="EnableLangpackInstallation" oor:type="xs:boolean" oor:nillable="false">
+ <info>
+ <desc>Specifies if missing langpack installation should be triggered.</desc>
+ </info>
+- <value>true</value>
++ <value>false</value>
+ </prop>
+ </group>
+ <group oor:name="Classification">
+diff --git a/svtools/source/misc/langhelp.cxx b/svtools/source/misc/langhelp.cxx
+index 47cb87e36963..8dc00e09bd3b 100644
+--- a/svtools/source/misc/langhelp.cxx
++++ b/svtools/source/misc/langhelp.cxx
+@@ -137,8 +137,7 @@ OUString getInstalledLocaleForSystemUILanguage(const css::uno::Sequence<OUString
+ else
+ aPackages.emplace_back("libreoffice-langpack-" + install);
+ }
+- //Debian would be: "The Document Foundation/Debian"
+- else if (sVendor == "The Document Foundation, Debian and Ubuntu")
++ else if (sVendor == "The Document Foundation/Debian" || sVendor == "The Document Foundation, Debian and Ubuntu")
+ {
+ // l10n is the typical Debian/Ubuntu naming convention
+ aPackages.emplace_back("libreoffice-l10n-" + install);
--- /dev/null
+From 1d0727a104d76210814f41c1169df318e40c9d80 Mon Sep 17 00:00:00 2001
+From: Kohei Yoshida <kohei.yoshida@gmail.com>
+Date: Mon, 27 Aug 2018 11:06:17 -0400
+Subject: [PATCH] Update orcus to 0.14.0.
+
+And make all necessary adjustments for the new version of orcus.
+
+Change-Id: I0dc207162a3ddfaad6da198a3d13b65f530757d5
+Reviewed-on: https://gerrit.libreoffice.org/59884
+Tested-by: Jenkins
+Reviewed-by: Kohei Yoshida <libreoffice@kohei.us>
+---
+ RepositoryExternal.mk | 4 +-
+ configure.ac | 2 +-
+ download.lst | 4 +-
+ .../0001-Missing-header-for-std-tolower.patch | 24 ++
+ external/liborcus/ExternalPackage_liborcus.mk | 8 +-
+ external/liborcus/ExternalProject_liborcus.mk | 4 +-
+ external/liborcus/Library_orcus.mk | 2 +
+ external/liborcus/UnpackedTarball_liborcus.mk | 1 +
+ external/liborcus/gcc9.patch.0 | 3 +-
+ sc/source/filter/inc/orcusinterface.hxx | 107 ++++--
+ sc/source/filter/orcus/interface.cxx | 322 +++++++++++++-----
+ sc/source/filter/orcus/xmlcontext.cxx | 5 +-
+ 12 files changed, 360 insertions(+), 126 deletions(-)
+ create mode 100644 external/liborcus/0001-Missing-header-for-std-tolower.patch
+
+diff --git a/RepositoryExternal.mk b/RepositoryExternal.mk
+index cec79cc105e8..f172765a84f8 100644
+--- a/RepositoryExternal.mk
++++ b/RepositoryExternal.mk
+@@ -3295,7 +3295,7 @@ $(call gb_LinkTarget_set_include,$(1),\
+ )
+
+ $(call gb_LinkTarget_add_libs,$(1),\
+- -L$(call gb_UnpackedTarball_get_dir,liborcus)/src/liborcus/.libs -lorcus-0.13 \
++ -L$(call gb_UnpackedTarball_get_dir,liborcus)/src/liborcus/.libs -lorcus-0.14 \
+ )
+
+ $(if $(SYSTEM_BOOST), \
+@@ -3314,7 +3314,7 @@ $(call gb_LinkTarget_set_include,$(1),\
+ )
+
+ $(call gb_LinkTarget_add_libs,$(1),\
+- -L$(call gb_UnpackedTarball_get_dir,liborcus)/src/parser/.libs -lorcus-parser-0.13 \
++ -L$(call gb_UnpackedTarball_get_dir,liborcus)/src/parser/.libs -lorcus-parser-0.14 \
+ )
+
+ endef
+diff --git a/configure.ac b/configure.ac
+index 3c9e5dc5e908..a60a3e72689f 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -9196,7 +9196,7 @@ AC_SUBST(ENABLE_FUZZERS)
+ dnl ===================================================================
+ dnl Orcus
+ dnl ===================================================================
+-libo_CHECK_SYSTEM_MODULE([orcus],[ORCUS],[liborcus-0.13 >= 0.13.3])
++libo_CHECK_SYSTEM_MODULE([orcus],[ORCUS],[liborcus-0.14 >= 0.14.0])
+ if test "$with_system_orcus" != "yes"; then
+ if test "$SYSTEM_BOOST" = "TRUE"; then
+ # ===========================================================
+diff --git a/download.lst b/download.lst
+index 1ed75b36f3b3..3532e2be3aa3 100644
+--- a/download.lst
++++ b/download.lst
+@@ -194,8 +194,8 @@ export OPENLDAP_SHA256SUM := cdd6cffdebcd95161a73305ec13fc7a78e9707b46ca9f84fb89
+ export OPENLDAP_TARBALL := openldap-2.4.45.tgz
+ export OPENSSL_SHA256SUM := 50a98e07b1a89eb8f6a99477f262df71c6fa7bef77df4dc83025a2845c827d00
+ export OPENSSL_TARBALL := openssl-1.0.2p.tar.gz
+-export ORCUS_SHA256SUM := bc01b1b3e9091416f498840d3c19a1aa2704b448100e7f6b80eefe88aab06d5b
+-export ORCUS_TARBALL := liborcus-0.13.4.tar.gz
++export ORCUS_SHA256SUM := 7bcfac3f4f490540292cfc87d3fde7b47eafa8450afa1e1a2c181d8293dcd4ef
++export ORCUS_TARBALL := liborcus-0.14.0.tar.gz
+ export OWNCLOUD_ANDROID_LIB_SHA256SUM := b18b3e3ef7fae6a79b62f2bb43cc47a5346b6330f6a383dc4be34439aca5e9fb
+ export OWNCLOUD_ANDROID_LIB_TARBALL := owncloud-android-library-0.9.4-no-binary-deps.tar.gz
+ export PAGEMAKER_SHA256SUM := 66adacd705a7d19895e08eac46d1e851332adf2e736c566bef1164e7a442519d
+diff --git a/external/liborcus/0001-Missing-header-for-std-tolower.patch b/external/liborcus/0001-Missing-header-for-std-tolower.patch
+new file mode 100644
+index 000000000000..2e00be92a872
+--- /dev/null
++++ b/external/liborcus/0001-Missing-header-for-std-tolower.patch
+@@ -0,0 +1,24 @@
++From 3a6bb93a382b4d5f1463ee3fdd54cab7048ff996 Mon Sep 17 00:00:00 2001
++From: Kohei Yoshida <kohei.yoshida@gmail.com>
++Date: Fri, 31 Aug 2018 16:07:06 -0400
++Subject: [PATCH] Missing header for std::tolower.
++
++---
++ src/parser/sax_token_parser.cpp | 1 +
++ 1 file changed, 1 insertion(+)
++
++diff --git a/src/parser/sax_token_parser.cpp b/src/parser/sax_token_parser.cpp
++index 9790b498..44ba5844 100644
++--- a/src/parser/sax_token_parser.cpp
+++++ b/src/parser/sax_token_parser.cpp
++@@ -9,6 +9,7 @@
++ #include "orcus/tokens.hpp"
++
++ #include <mdds/sorted_string_map.hpp>
+++#include <cctype>
++
++ namespace orcus {
++
++--
++2.17.1
++
+diff --git a/external/liborcus/ExternalPackage_liborcus.mk b/external/liborcus/ExternalPackage_liborcus.mk
+index 32382b7d89a1..ffa0b38bea19 100644
+--- a/external/liborcus/ExternalPackage_liborcus.mk
++++ b/external/liborcus/ExternalPackage_liborcus.mk
+@@ -12,11 +12,11 @@ $(eval $(call gb_ExternalPackage_ExternalPackage,liborcus,liborcus))
+ $(eval $(call gb_ExternalPackage_use_external_project,liborcus,liborcus))
+
+ ifeq ($(OS),MACOSX)
+-$(eval $(call gb_ExternalPackage_add_file,liborcus,$(LIBO_LIB_FOLDER)/liborcus-0.13.0.dylib,src/liborcus/.libs/liborcus-0.13.0.dylib))
+-$(eval $(call gb_ExternalPackage_add_file,liborcus,$(LIBO_LIB_FOLDER)/liborcus-parser-0.13.0.dylib,src/parser/.libs/liborcus-parser-0.13.0.dylib))
++$(eval $(call gb_ExternalPackage_add_file,liborcus,$(LIBO_LIB_FOLDER)/liborcus-0.14.0.dylib,src/liborcus/.libs/liborcus-0.14.0.dylib))
++$(eval $(call gb_ExternalPackage_add_file,liborcus,$(LIBO_LIB_FOLDER)/liborcus-parser-0.14.0.dylib,src/parser/.libs/liborcus-parser-0.14.0.dylib))
+ else ifeq ($(DISABLE_DYNLOADING),)
+-$(eval $(call gb_ExternalPackage_add_file,liborcus,$(LIBO_LIB_FOLDER)/liborcus-0.13.so.0,src/liborcus/.libs/liborcus-0.13.so.0.0.0))
+-$(eval $(call gb_ExternalPackage_add_file,liborcus,$(LIBO_LIB_FOLDER)/liborcus-parser-0.13.so.0,src/parser/.libs/liborcus-parser-0.13.so.0.0.0))
++$(eval $(call gb_ExternalPackage_add_file,liborcus,$(LIBO_LIB_FOLDER)/liborcus-0.14.so.0,src/liborcus/.libs/liborcus-0.14.so.0.0.0))
++$(eval $(call gb_ExternalPackage_add_file,liborcus,$(LIBO_LIB_FOLDER)/liborcus-parser-0.14.so.0,src/parser/.libs/liborcus-parser-0.14.so.0.0.0))
+ endif
+
+ # vim: set noet sw=4 ts=4:
+diff --git a/external/liborcus/ExternalProject_liborcus.mk b/external/liborcus/ExternalProject_liborcus.mk
+index 928c78e3a267..1aa591228f40 100644
+--- a/external/liborcus/ExternalProject_liborcus.mk
++++ b/external/liborcus/ExternalProject_liborcus.mk
+@@ -114,8 +114,8 @@ $(call gb_ExternalProject_get_state_target,liborcus,build) :
+ $(MAKE) \
+ $(if $(filter MACOSX,$(OS)),\
+ && $(PERL) $(SRCDIR)/solenv/bin/macosx-change-install-names.pl shl OOO \
+- $(EXTERNAL_WORKDIR)/src/liborcus/.libs/liborcus-0.13.0.dylib \
+- $(EXTERNAL_WORKDIR)/src/parser/.libs/liborcus-parser-0.13.0.dylib \
++ $(EXTERNAL_WORKDIR)/src/liborcus/.libs/liborcus-0.14.0.dylib \
++ $(EXTERNAL_WORKDIR)/src/parser/.libs/liborcus-parser-0.14.0.dylib \
+ ) \
+ )
+
+diff --git a/external/liborcus/Library_orcus.mk b/external/liborcus/Library_orcus.mk
+index 6457ec4afc0c..1f026c425244 100644
+--- a/external/liborcus/Library_orcus.mk
++++ b/external/liborcus/Library_orcus.mk
+@@ -55,6 +55,7 @@ $(eval $(call gb_Library_add_generated_exception_objects,orcus,\
+ UnpackedTarball/liborcus/src/liborcus/detection_result \
+ UnpackedTarball/liborcus/src/liborcus/dom_tree \
+ UnpackedTarball/liborcus/src/liborcus/format_detection \
++ UnpackedTarball/liborcus/src/liborcus/formula_result \
+ UnpackedTarball/liborcus/src/liborcus/global \
+ UnpackedTarball/liborcus/src/liborcus/gnumeric_cell_context \
+ UnpackedTarball/liborcus/src/liborcus/gnumeric_context \
+@@ -96,6 +97,7 @@ $(eval $(call gb_Library_add_generated_exception_objects,orcus,\
+ UnpackedTarball/liborcus/src/liborcus/orcus_xlsx \
+ UnpackedTarball/liborcus/src/liborcus/orcus_xml \
+ UnpackedTarball/liborcus/src/liborcus/session_context \
++ UnpackedTarball/liborcus/src/liborcus/spreadsheet_iface_util \
+ UnpackedTarball/liborcus/src/liborcus/spreadsheet_interface \
+ UnpackedTarball/liborcus/src/liborcus/spreadsheet_types \
+ UnpackedTarball/liborcus/src/liborcus/string_helper \
+diff --git a/external/liborcus/UnpackedTarball_liborcus.mk b/external/liborcus/UnpackedTarball_liborcus.mk
+index 215bd4b8cc15..f637cc73db46 100644
+--- a/external/liborcus/UnpackedTarball_liborcus.mk
++++ b/external/liborcus/UnpackedTarball_liborcus.mk
+@@ -19,5 +19,6 @@ $(eval $(call gb_UnpackedTarball_add_patches,liborcus,\
+ external/liborcus/0001-workaround-a-linking-problem-on-windows.patch \
+ external/liborcus/rpath.patch.0 \
++ external/liborcus/0001-Missing-header-for-std-tolower.patch \
+ ))
+
+ ifeq ($(OS),WNT)
+diff --git a/sc/source/filter/inc/orcusinterface.hxx b/sc/source/filter/inc/orcusinterface.hxx
+index 028fb4126f01..dce0d5b0a64e 100644
+--- a/sc/source/filter/inc/orcusinterface.hxx
++++ b/sc/source/filter/inc/orcusinterface.hxx
+@@ -54,6 +54,7 @@ public:
+ ScOrcusGlobalSettings(ScDocumentImport& rDoc);
+
+ virtual void set_origin_date(int year, int month, int day) override;
++ virtual void set_character_set(orcus::character_set_t cs) override;
+
+ virtual void set_default_formula_grammar(orcus::spreadsheet::formula_grammar_t grammar) override;
+ virtual orcus::spreadsheet::formula_grammar_t get_default_formula_grammar() const override;
+@@ -181,7 +182,7 @@ public:
+
+ virtual ~ScOrcusAutoFilter() override;
+
+- virtual void set_range(const char* p_ref, size_t n_ref) override;
++ virtual void set_range(const orcus::spreadsheet::range_t& range) override;
+
+ virtual void set_column(orcus::spreadsheet::col_t col) override;
+
+@@ -214,22 +215,95 @@ public:
+ virtual void set_merge_cell_range(const orcus::spreadsheet::range_t& range) override;
+ };
+
++class ScOrcusSheet;
++
++class ScOrcusFormula : public orcus::spreadsheet::iface::import_formula
++{
++ enum class ResultType { NotSet, String, Value, Empty };
++
++ friend class ScOrcusSheet;
++
++ ScOrcusSheet& mrSheet;
++
++ SCCOL mnCol;
++ SCROW mnRow;
++ OUString maFormula;
++ formula::FormulaGrammar::Grammar meGrammar;
++ size_t mnSharedFormulaIndex;
++ bool mbShared;
++
++ ResultType meResType;
++ size_t mnResult; // result string index.
++ double mfResult;
++
++ void reset();
++
++public:
++ ScOrcusFormula( ScOrcusSheet& rSheet );
++ virtual ~ScOrcusFormula() override;
++
++ virtual void set_position(orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col) override;
++ virtual void set_formula(orcus::spreadsheet::formula_grammar_t grammar, const char* p, size_t n) override;
++ virtual void set_shared_formula_index(size_t index) override;
++ virtual void set_result_value(double value) override;
++ virtual void set_result_string(size_t sindex) override;
++ virtual void set_result_empty() override;
++ virtual void set_result_bool(bool value) override;
++ virtual void commit() override;
++};
++
++class ScOrcusArrayFormula : public orcus::spreadsheet::iface::import_array_formula
++{
++ friend class ScOrcusSheet;
++
++ ScOrcusSheet& mrSheet;
++
++ SCCOL mnCol;
++ SCROW mnRow;
++ uint32_t mnColRange;
++ uint32_t mnRowRange;
++ OUString maFormula;
++ formula::FormulaGrammar::Grammar meGrammar;
++
++ void reset();
++
++public:
++ ScOrcusArrayFormula( ScOrcusSheet& rSheet );
++ virtual ~ScOrcusArrayFormula() override;
++
++ virtual void set_range(const orcus::spreadsheet::range_t& range) override;
++ virtual void set_formula(orcus::spreadsheet::formula_grammar_t grammar, const char* p, size_t n) override;
++ virtual void set_result_value(orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col, double value) override;
++ virtual void set_result_string(orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col, size_t sindex) override;
++ virtual void set_result_empty(orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col) override;
++ virtual void set_result_bool(orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col, bool value) override;
++ virtual void commit() override;
++};
++
+ class ScOrcusSheet : public orcus::spreadsheet::iface::import_sheet
+ {
++ friend class ScOrcusFormula;
++ friend class ScOrcusArrayFormula;
++
+ ScDocumentImport& mrDoc;
+ SCTAB mnTab;
+ ScOrcusFactory& mrFactory;
+ ScOrcusStyles& mrStyles;
+ sc::SharedFormulaGroups maFormulaGroups;
++
+ ScOrcusAutoFilter maAutoFilter;
+ ScOrcusSheetProperties maProperties;
+ ScOrcusConditionalFormat maConditionalFormat;
+ ScOrcusNamedExpression maNamedExpressions;
++ ScOrcusFormula maFormula;
++ ScOrcusArrayFormula maArrayFormula;
+
+ int mnCellCount;
+
+ void cellInserted();
+
++ ScDocumentImport& getDoc();
++
+ public:
+ ScOrcusSheet(ScDocumentImport& rDoc, SCTAB nTab, ScOrcusFactory& rFactory);
+
+@@ -238,6 +312,8 @@ public:
+ virtual orcus::spreadsheet::iface::import_sheet_properties* get_sheet_properties() override;
+ virtual orcus::spreadsheet::iface::import_conditional_format* get_conditional_format() override;
+ virtual orcus::spreadsheet::iface::import_named_expression* get_named_expression() override;
++ virtual orcus::spreadsheet::iface::import_formula* get_formula() override;
++ virtual orcus::spreadsheet::iface::import_array_formula* get_array_formula() override;
+
+ // Orcus import interface
+ virtual void set_auto(orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col, const char* p, size_t n) override;
+@@ -251,33 +327,13 @@ public:
+ virtual void set_format(orcus::spreadsheet::row_t row_start, orcus::spreadsheet::col_t col_start,
+ orcus::spreadsheet::row_t row_end, orcus::spreadsheet::col_t col_end, size_t xf_index) override;
+
+- virtual void set_formula(orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col, orcus::spreadsheet::formula_grammar_t grammar, const char* p, size_t n) override;
+- virtual void set_formula_result(orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col, const char* p, size_t n) override;
+- virtual void set_formula_result(orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col, double val) override;
+-
+- virtual void set_shared_formula(
+- orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col, orcus::spreadsheet::formula_grammar_t grammar, size_t sindex,
+- const char* p_formula, size_t n_formula) override;
+-
+- virtual void set_shared_formula(
+- orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col, orcus::spreadsheet::formula_grammar_t grammar, size_t sindex,
+- const char* p_formula, size_t n_formula, const char* p_range, size_t n_range) override;
+-
+- virtual void set_shared_formula(orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col, size_t sindex) override;
+-
+- virtual void set_array_formula(
+- orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col, orcus::spreadsheet::formula_grammar_t grammar,
+- const char* p, size_t n, orcus::spreadsheet::row_t array_rows, orcus::spreadsheet::col_t array_cols) override;
+-
+- virtual void set_array_formula(
+- orcus::spreadsheet::row_t row, orcus::spreadsheet::col_t col, orcus::spreadsheet::formula_grammar_t grammar,
+- const char* p, size_t n, const char* p_range, size_t n_range) override;
+-
+ virtual orcus::spreadsheet::range_size_t get_sheet_size() const override;
+
+ SCTAB getIndex() const { return mnTab; }
+
+ const sc::SharedFormulaGroups& getSharedFormulaGroups() const;
++ sc::SharedFormulaGroups& getSharedFormulaGroups();
++ ScOrcusFactory& getFactory();
+ };
+
+ class ScOrcusStyles : public orcus::spreadsheet::iface::import_styles
+@@ -312,7 +368,7 @@ private:
+
+ struct fill
+ {
+- OUString maPattern;
++ orcus::spreadsheet::fill_pattern_t mePattern;
+ Color maFgColor;
+ Color maBgColor;
+
+@@ -446,7 +502,7 @@ public:
+ // fill
+
+ virtual void set_fill_count(size_t n) override;
+- virtual void set_fill_pattern_type(const char* s, size_t n) override;
++ virtual void set_fill_pattern_type(orcus::spreadsheet::fill_pattern_t fp) override;
+ virtual void set_fill_fg_color(orcus::spreadsheet::color_elem_t alpha, orcus::spreadsheet::color_elem_t red, orcus::spreadsheet::color_elem_t green, orcus::spreadsheet::color_elem_t blue) override;
+ virtual void set_fill_bg_color(orcus::spreadsheet::color_elem_t alpha, orcus::spreadsheet::color_elem_t red, orcus::spreadsheet::color_elem_t green, orcus::spreadsheet::color_elem_t blue) override;
+ virtual size_t commit_fill() override;
+@@ -580,6 +636,7 @@ public:
+
+ size_t appendString(const OUString& rStr);
+ size_t addString(const OUString& rStr);
++ const OUString* getString(size_t nIndex) const;
+
+ void pushCellStoreAutoToken( const ScAddress& rPos, const OUString& rVal );
+ void pushCellStoreToken( const ScAddress& rPos, uint32_t nStrIndex );
+diff --git a/sc/source/filter/orcus/interface.cxx b/sc/source/filter/orcus/interface.cxx
+index dcf3e83d7eae..7b8425d3007d 100644
+--- a/sc/source/filter/orcus/interface.cxx
++++ b/sc/source/filter/orcus/interface.cxx
+@@ -101,6 +101,11 @@ void ScOrcusGlobalSettings::set_origin_date(int year, int month, int day)
+ mrDoc.setOriginDate(year, month, day);
+ }
+
++void ScOrcusGlobalSettings::set_character_set(orcus::character_set_t /*cs*/)
++{
++ // TODO
++}
++
+ void ScOrcusGlobalSettings::set_default_formula_grammar(os::formula_grammar_t grammar)
+ {
+ meCalcGrammar = getCalcGrammarFromOrcus(grammar);
+@@ -463,6 +468,11 @@ size_t ScOrcusFactory::addString(const OUString& rStr)
+ return appendString(rStr);
+ }
+
++const OUString* ScOrcusFactory::getString(size_t nIndex) const
++{
++ return nIndex < maStrings.size() ? &maStrings[nIndex] : nullptr;
++}
++
+ void ScOrcusFactory::pushCellStoreAutoToken( const ScAddress& rPos, const OUString& rVal )
+ {
+ maCellStoreTokens.emplace_back(rPos, CellStoreToken::Type::Auto);
+@@ -816,10 +826,197 @@ ScOrcusSheet::ScOrcusSheet(ScDocumentImport& rDoc, SCTAB nTab, ScOrcusFactory& r
+ maProperties(mnTab, mrDoc),
+ maConditionalFormat(mnTab, rDoc.getDoc()),
+ maNamedExpressions(rDoc, rFactory.getGlobalSettings(), nTab),
++ maFormula(*this),
++ maArrayFormula(*this),
+ mnCellCount(0)
+ {
+ }
+
++void ScOrcusFormula::reset()
++{
++ mnCol = -1;
++ mnRow = -1;
++ maFormula.clear();
++ meGrammar = formula::FormulaGrammar::GRAM_UNSPECIFIED;
++ mnSharedFormulaIndex = 0;
++ mbShared = false;
++ meResType = ResultType::NotSet;
++ mnResult = 0;
++ mfResult = 0.0;
++}
++
++ScOrcusFormula::ScOrcusFormula( ScOrcusSheet& rSheet ) :
++ mrSheet(rSheet),
++ mnCol(-1),
++ mnRow(-1),
++ meGrammar(formula::FormulaGrammar::GRAM_UNSPECIFIED),
++ mnSharedFormulaIndex(0),
++ mbShared(false),
++ meResType(ResultType::NotSet),
++ mnResult(0),
++ mfResult(0.0) {}
++
++ScOrcusFormula::~ScOrcusFormula() {}
++
++void ScOrcusFormula::set_position(os::row_t row, os::col_t col)
++{
++ mnCol = col;
++ mnRow = row;
++}
++
++void ScOrcusFormula::set_formula(os::formula_grammar_t grammar, const char* p, size_t n)
++{
++ maFormula = OUString(p, n, RTL_TEXTENCODING_UTF8);
++ meGrammar = getCalcGrammarFromOrcus(grammar);
++}
++
++void ScOrcusFormula::set_shared_formula_index(size_t index)
++{
++ mnSharedFormulaIndex = index;
++ mbShared = true;
++}
++
++void ScOrcusFormula::set_result_value(double value)
++{
++ meResType = ResultType::Value;
++ mfResult = value;
++}
++
++void ScOrcusFormula::set_result_string(size_t sindex)
++{
++ meResType = ResultType::String;
++ mnResult = sindex;
++}
++
++void ScOrcusFormula::set_result_empty()
++{
++ meResType = ResultType::Empty;
++}
++
++void ScOrcusFormula::set_result_bool(bool value)
++{
++ meResType = ResultType::Value;
++ mfResult = value ? 1.0 : 0.0;
++}
++
++void ScOrcusFormula::commit()
++{
++ ScOrcusFactory& rFactory = mrSheet.getFactory();
++ sc::SharedFormulaGroups& rGroups = mrSheet.getSharedFormulaGroups();
++ ScAddress aPos(mnCol, mnRow, mrSheet.getIndex());
++
++ if (mbShared)
++ {
++ if (maFormula.isEmpty())
++ {
++ // shared formula that references existing formula token.
++ const ScTokenArray* pArray = rGroups.get(mnSharedFormulaIndex);
++ if (!pArray)
++ return;
++ }
++ else
++ {
++ // topmost shared formula with new formula token.
++
++ // Compile the formula expression into tokens.
++ ScCompiler aComp(&mrSheet.getDoc().getDoc(), aPos, meGrammar);
++ ScTokenArray* pArray = aComp.CompileString(maFormula);
++ if (!pArray)
++ // Tokenization failed.
++ return;
++
++ rGroups.set(mnSharedFormulaIndex, pArray);
++ }
++ rFactory.pushSharedFormulaToken(aPos, mnSharedFormulaIndex);
++ }
++ else
++ {
++ // non-shared formula
++ rFactory.pushCellStoreToken(aPos, maFormula, meGrammar);
++ }
++
++ switch (meResType)
++ {
++ case ResultType::String:
++ {
++ const OUString* pStr = rFactory.getString(mnResult);
++ if (pStr)
++ rFactory.pushFormulaResult(aPos, *pStr);
++ break;
++ }
++ case ResultType::Value:
++ rFactory.pushFormulaResult(aPos, mfResult);
++ break;
++ default:
++ ;
++ }
++
++ mrSheet.cellInserted();
++}
++
++void ScOrcusArrayFormula::reset()
++{
++ mnCol = -1;
++ mnRow = -1;
++ mnColRange = 0;
++ mnRowRange = 0;
++
++ maFormula.clear();
++ meGrammar = formula::FormulaGrammar::GRAM_UNSPECIFIED;
++}
++
++ScOrcusArrayFormula::ScOrcusArrayFormula( ScOrcusSheet& rSheet ) :
++ mrSheet(rSheet),
++ mnCol(-1),
++ mnRow(-1),
++ mnColRange(0),
++ mnRowRange(0),
++ meGrammar(formula::FormulaGrammar::GRAM_UNSPECIFIED) {}
++
++ScOrcusArrayFormula::~ScOrcusArrayFormula() {}
++
++void ScOrcusArrayFormula::set_range(const os::range_t& range)
++{
++ mnCol = range.first.column;
++ mnRow = range.first.row;
++
++ mnColRange = range.last.column - range.first.column + 1;
++ mnRowRange = range.last.row - range.first.column + 1;
++}
++
++void ScOrcusArrayFormula::set_formula(os::formula_grammar_t grammar, const char* p, size_t n)
++{
++ meGrammar = getCalcGrammarFromOrcus(grammar);
++ maFormula = OUString(p, n, RTL_TEXTENCODING_UTF8);
++}
++
++void ScOrcusArrayFormula::set_result_value(os::row_t /*row*/, os::col_t /*col*/, double /*value*/)
++{
++ // TODO : implement result cache for matrix
++}
++
++void ScOrcusArrayFormula::set_result_string(os::row_t /*row*/, os::col_t /*col*/, size_t /*sindex*/)
++{
++ // TODO : implement result cache for matrix
++}
++
++void ScOrcusArrayFormula::set_result_empty(os::row_t /*row*/, os::col_t /*col*/)
++{
++ // TODO : implement result cache for matrix
++}
++
++void ScOrcusArrayFormula::set_result_bool(os::row_t /*row*/, os::col_t /*col*/, bool /*value*/)
++{
++ // TODO : implement result cache for matrix
++}
++
++void ScOrcusArrayFormula::commit()
++{
++ ScAddress aPos(mnCol, mnRow, mrSheet.getIndex());
++ mrSheet.getFactory().pushMatrixFormulaToken(aPos, maFormula, meGrammar, mnRowRange, mnColRange);
++ mrSheet.cellInserted();
++}
++
+ void ScOrcusSheet::cellInserted()
+ {
+ ++mnCellCount;
+@@ -830,6 +1027,11 @@ void ScOrcusSheet::cellInserted()
+ }
+ }
+
++ScDocumentImport& ScOrcusSheet::getDoc()
++{
++ return mrDoc;
++}
++
+ os::iface::import_auto_filter* ScOrcusSheet::get_auto_filter()
+ {
+ return &maAutoFilter;
+@@ -855,6 +1057,18 @@ os::iface::import_named_expression* ScOrcusSheet::get_named_expression()
+ return &maNamedExpressions;
+ }
+
++os::iface::import_formula* ScOrcusSheet::get_formula()
++{
++ maFormula.reset();
++ return &maFormula;
++}
++
++os::iface::import_array_formula* ScOrcusSheet::get_array_formula()
++{
++ maArrayFormula.reset();
++ return &maArrayFormula;
++}
++
+ void ScOrcusSheet::set_auto(os::row_t row, os::col_t col, const char* p, size_t n)
+ {
+ OUString aVal(p, n, RTL_TEXTENCODING_UTF8);
+@@ -921,83 +1135,6 @@ void ScOrcusSheet::set_format(os::row_t row_start, os::col_t col_start,
+ mrDoc.getDoc().ApplyPatternAreaTab(col_start, row_start, col_end, row_end, mnTab, aPattern);
+ }
+
+-void ScOrcusSheet::set_formula(
+- os::row_t row, os::col_t col, os::formula_grammar_t grammar, const char* p, size_t n)
+-{
+- OUString aFormula(p, n, RTL_TEXTENCODING_UTF8);
+- mrFactory.pushCellStoreToken(
+- ScAddress(col, row, mnTab), aFormula, getCalcGrammarFromOrcus(grammar));
+- cellInserted();
+-}
+-
+-void ScOrcusSheet::set_formula_result(os::row_t row, os::col_t col, const char* p, size_t n)
+-{
+- OUString aResult( p, n, RTL_TEXTENCODING_UTF8);
+- mrFactory.pushFormulaResult(ScAddress(col, row, mnTab), aResult);
+-}
+-
+-void ScOrcusSheet::set_formula_result(os::row_t row, os::col_t col, double val)
+-{
+- mrFactory.pushFormulaResult(ScAddress(col, row, mnTab), val);
+-}
+-
+-void ScOrcusSheet::set_shared_formula(
+- os::row_t row, os::col_t col, os::formula_grammar_t grammar, size_t sindex,
+- const char* p_formula, size_t n_formula)
+-{
+- ScAddress aPos(col, row, mnTab);
+- OUString aFormula(p_formula, n_formula, RTL_TEXTENCODING_UTF8);
+- formula::FormulaGrammar::Grammar eGram = getCalcGrammarFromOrcus(grammar);
+-
+- // Compile the formula expression into tokens.
+- ScCompiler aComp(&mrDoc.getDoc(), aPos, eGram);
+- ScTokenArray* pArray = aComp.CompileString(aFormula);
+- if (!pArray)
+- // Tokenization failed.
+- return;
+-
+- maFormulaGroups.set(sindex, pArray);
+-
+- mrFactory.pushSharedFormulaToken(aPos, sindex);
+- cellInserted();
+-}
+-
+-void ScOrcusSheet::set_shared_formula(
+- os::row_t row, os::col_t col, os::formula_grammar_t grammar, size_t sindex,
+- const char* p_formula, size_t n_formula, const char* /*p_range*/, size_t /*n_range*/)
+-{
+- set_shared_formula(row, col, grammar, sindex, p_formula, n_formula);
+-}
+-
+-void ScOrcusSheet::set_shared_formula(os::row_t row, os::col_t col, size_t sindex)
+-{
+- ScAddress aPos(col, row, mnTab);
+-
+- const ScTokenArray* pArray = maFormulaGroups.get(sindex);
+- if (!pArray)
+- return;
+-
+- mrFactory.pushSharedFormulaToken(aPos, sindex);
+- cellInserted();
+-}
+-
+-void ScOrcusSheet::set_array_formula(
+- os::row_t row, os::col_t col, os::formula_grammar_t grammar,
+- const char* p, size_t n, os::row_t array_rows, os::col_t array_cols)
+-{
+- OUString aFormula(p, n, RTL_TEXTENCODING_UTF8);
+- formula::FormulaGrammar::Grammar eGrammar = getCalcGrammarFromOrcus(grammar);
+-
+- ScAddress aPos(col, row, mnTab);
+- mrFactory.pushMatrixFormulaToken(aPos, aFormula, eGrammar, array_rows, array_cols);
+-}
+-
+-void ScOrcusSheet::set_array_formula(
+- os::row_t /*row*/, os::col_t /*col*/, os::formula_grammar_t /*grammar*/,
+- const char* /*p*/, size_t /*n*/, const char* /*p_range*/, size_t /*n_range*/)
+-{
+-}
+-
+ orcus::spreadsheet::range_size_t ScOrcusSheet::get_sheet_size() const
+ {
+ orcus::spreadsheet::range_size_t ret;
+@@ -1012,6 +1149,16 @@ const sc::SharedFormulaGroups& ScOrcusSheet::getSharedFormulaGroups() const
+ return maFormulaGroups;
+ }
+
++sc::SharedFormulaGroups& ScOrcusSheet::getSharedFormulaGroups()
++{
++ return maFormulaGroups;
++}
++
++ScOrcusFactory& ScOrcusSheet::getFactory()
++{
++ return mrFactory;
++}
++
+ ScOrcusSharedStrings::ScOrcusSharedStrings(ScOrcusFactory& rFactory) :
+ mrFactory(rFactory) {}
+
+@@ -1087,7 +1234,7 @@ ScOrcusStyles::font::font():
+ }
+
+ ScOrcusStyles::fill::fill():
+- maPattern(""),
++ mePattern(orcus::spreadsheet::fill_pattern_t::none),
+ maFgColor(COL_WHITE),
+ maBgColor(COL_WHITE),
+ mbHasFillAttr(false)
+@@ -1143,13 +1290,13 @@ void ScOrcusStyles::font::applyToItemSet(SfxItemSet& rSet) const
+
+ void ScOrcusStyles::fill::applyToItemSet(SfxItemSet& rSet) const
+ {
+- if (maPattern.equalsIgnoreAsciiCase("none"))
++ if (mePattern == orcus::spreadsheet::fill_pattern_t::none)
+ {
+ SAL_INFO("sc.orcus.style", "no fill style");
+ return;
+ }
+
+- if (maPattern.equalsIgnoreAsciiCase("solid"))
++ if (mePattern == orcus::spreadsheet::fill_pattern_t::solid)
+ rSet.Put(SvxBrushItem(maFgColor, ATTR_BACKGROUND));
+ }
+
+@@ -1575,10 +1722,9 @@ void ScOrcusStyles::set_fill_count(size_t /*n*/)
+ // needed at all?
+ }
+
+-void ScOrcusStyles::set_fill_pattern_type(const char* s, size_t n)
++void ScOrcusStyles::set_fill_pattern_type(orcus::spreadsheet::fill_pattern_t fp)
+ {
+- maCurrentFill.maPattern = OUString(s, n, RTL_TEXTENCODING_UTF8);
+- maCurrentFill.mbHasFillAttr = true;
++ maCurrentFill.mePattern = fp;
+ }
+
+ void ScOrcusStyles::set_fill_fg_color(
+@@ -1962,12 +2108,12 @@ ScOrcusAutoFilter::~ScOrcusAutoFilter()
+ {
+ }
+
+-void ScOrcusAutoFilter::set_range(const char* p_ref, size_t n_ref)
++void ScOrcusAutoFilter::set_range(const orcus::spreadsheet::range_t& range)
+ {
+- OUString aRange(p_ref, n_ref, RTL_TEXTENCODING_UTF8);
+- SAL_INFO("sc.orcus.autofilter", "set_range: " << aRange);
+-
+- maRange.Parse(aRange);
++ maRange.aStart.SetRow(range.first.row);
++ maRange.aStart.SetCol(range.first.column);
++ maRange.aEnd.SetRow(range.last.row);
++ maRange.aEnd.SetCol(range.last.column);
+ }
+
+ void ScOrcusAutoFilter::set_column(orcus::spreadsheet::col_t col)
+diff --git a/sc/source/filter/orcus/xmlcontext.cxx b/sc/source/filter/orcus/xmlcontext.cxx
+index e47b862c2138..5494ddefc434 100644
+--- a/sc/source/filter/orcus/xmlcontext.cxx
++++ b/sc/source/filter/orcus/xmlcontext.cxx
+@@ -24,6 +24,7 @@
+ #include <orcus/orcus_xml.hpp>
+ #include <orcus/global.hpp>
+ #include <orcus/sax_parser_base.hpp>
++#include <orcus/stream.hpp>
+
+ #include <com/sun/star/ucb/XCommandEnvironment.hpp>
+ #include <comphelper/processfactory.hxx>
+@@ -289,7 +290,9 @@ void ScOrcusXMLContextImpl::importXML(const ScOrcusImportXMLParam& rParam)
+ }
+ }
+
+- filter.read_file(path);
++ std::string content = orcus::load_file_content(path);
++ filter.read_stream(content.data(), content.size());
++
+ aFactory.finalize();
+ }
+ catch (const std::exception&)
+--
+2.17.1
+
--- /dev/null
+diff --git a/dbaccess/inc/strings.hrc b/dbaccess/inc/strings.hrc
+index 47068f43d09e..1f8b9a2331b6 100644
+--- a/dbaccess/inc/strings.hrc
++++ b/dbaccess/inc/strings.hrc
+@@ -349,7 +349,7 @@
+ #define STR_WARNINGS_DURING_CONNECT NC_("STR_WARNINGS_DURING_CONNECT", "Warnings were encountered while connecting to the data source. Press \"$buttontext$\" to view them.")
+ #define STR_NAMED_OBJECT_ALREADY_EXISTS NC_("STR_NAMED_OBJECT_ALREADY_EXISTS", "The name '$#$' already exists.\nPlease enter another name." )
+ // #i96130# use hard coded name
+-#define RID_STR_EXTENSION_NOT_PRESENT NC_("RID_STR_EXTENSION_NOT_PRESENT", "The report, \"$file$\", requires the Report Builder feature.")
++#define RID_STR_EXTENSION_NOT_PRESENT NC_("RID_STR_EXTENSION_NOT_PRESENT", "The report, \"$file$\", requires the Report Builder feature. For this, install the package 'libreoffice-report-builder'.")
+
+ #define STR_COULDNOTCREATE_DRIVERMANAGER NC_("STR_COULDNOTCREATE_DRIVERMANAGER", "Cannot connect to the SDBC driver manager (#servicename#).")
+ #define STR_NOREGISTEREDDRIVER NC_("STR_NOREGISTEREDDRIVER", "A driver is not registered for the URL #connurl#.")
--- /dev/null
+diff --git a/librelogo/source/LibreLogo/LibreLogo.py b/librelogo/source/LibreLogo/LibreLogo.py
+index e58537b2338a..2fa16ed81822 100644
+--- a/librelogo/source/LibreLogo/LibreLogo.py
++++ b/librelogo/source/LibreLogo/LibreLogo.py
+@@ -145,6 +145,7 @@ __LineStyle_DOTTED__ = 2
+ class __Doc__:
+ def __init__(self, doc):
+ self.doc = doc
++ self.secure = False
+ try:
+ self.drawpage = doc.DrawPage # Writer
+ except:
+@@ -468,10 +469,58 @@ class LogoProgram(threading.Thread):
+ self.code = code
+ threading.Thread.__init__(self)
+
++ def secure(self):
++ # 0 = secure
++ if _.secure:
++ return 0
++
++ # 1 = forms, fields or embedded objects are forbidden
++ if _.doc.DrawPage.Forms.getCount() > 0 or _.doc.getTextFields().createEnumeration().hasMoreElements() or _.doc.getEmbeddedObjects().getCount() > 0:
++ return 1
++
++ # 2 = hyperlinks with script events
++ nodes = _.doc.Text.createEnumeration()
++ while nodes.hasMoreElements():
++ node = nodes.nextElement()
++ if node.supportsService("com.sun.star.text.Paragraph"):
++ portions = node.createEnumeration()
++ while portions.hasMoreElements():
++ portion = portions.nextElement()
++ if portion.PropertySetInfo.hasPropertyByName("HyperLinkEvents"):
++ events = portion.getPropertyValue("HyperLinkEvents")
++ for event in events.getElementNames():
++ attributes = events.getByName(event)
++ for attribute in attributes:
++ if attribute.Name == "EventType" and attribute.Value == "Script":
++ return 2
++
++ # 2 = images with script events
++ images = _.doc.DrawPage.createEnumeration()
++ while images.hasMoreElements():
++ image = images.nextElement()
++ try:
++ events = image.Events
++ for event in events.getElementNames():
++ attributes = events.getByName(event)
++ for attribute in attributes:
++ if attribute.Name == "EventType" and attribute.Value == "Script":
++ return 2
++ except:
++ pass
++
++ _.secure = True
++ return 0
++
+ def run(self):
+ global __thread__
+ try:
+- exec(self.code)
++ # check document security
++ secid = self.secure()
++ if secid > 0:
++ parent = _.doc.CurrentController.Frame.ContainerWindow
++ MessageBox(parent, "Document objects with%s script events" % [" possible", ""][secid-1], "LibreLogo program can't start", "errorbox")
++ else:
++ exec(self.code)
+ if _.origcursor[0] and _.origcursor[1]:
+ __dispatcher__(".uno:Escape")
+ try:
--- /dev/null
+diff --git a/vcl/inc/impimagetree.hxx b/vcl/inc/impimagetree.hxx
+index 41c4f56..93d80f1 100644
+--- a/vcl/inc/impimagetree.hxx
++++ b/vcl/inc/impimagetree.hxx
+@@ -85,6 +85,10 @@ private:
+ typedef boost::unordered_map<
+ rtl::OUString, std::pair< bool, BitmapEx >, rtl::OUStringHash > IconCache;
+
++ // we want to search zip files (icons) also in /usr/share/
++ ::rtl::OUString m_datadir; // /usr/share/
++ ::rtl::OUString m_libdir; // /usr/lib or /usr/lib64
++
+ rtl::OUString m_style;
+ Zips m_zips;
+ CheckStyleCache m_checkStyleCache;
+@@ -92,6 +96,7 @@ private:
+
+ void setStyle(rtl::OUString const & style );
+
++ void addUrlToZips(const rtl::OUString &url);
+ void resetZips();
+
+ bool checkStyleCacheLookup( rtl::OUString const & style, bool &exists );
+diff --git a/vcl/source/gdi/impimagetree.cxx b/vcl/source/gdi/impimagetree.cxx
+index 03442fc..cfe6c45 100644
+--- a/vcl/source/gdi/impimagetree.cxx
++++ b/vcl/source/gdi/impimagetree.cxx
+@@ -121,7 +121,11 @@ void loadFromStream(
+
+ }
+
+-ImplImageTree::ImplImageTree() {}
++ImplImageTree::ImplImageTree()
++{
++ m_datadir = ::rtl::OUString::createFromAscii ( "/usr/share/" );
++ m_libdir = ::rtl::OUString::createFromAscii ( "/usr/lib/" );
++}
+
+ ImplImageTree::~ImplImageTree() {}
+
+@@ -259,6 +263,22 @@ void ImplImageTree::setStyle(rtl::OUString const & style) {
+ }
+ }
+
++void ImplImageTree::addUrlToZips(const rtl::OUString &url) {
++ if ( url.getLength() == 0 )
++ return;
++ m_zips.push_back(
++ std::make_pair(
++ url,
++ css::uno::Reference< css::container::XNameAccess >()));
++ sal_Int32 nLibDirPos = url.indexOf( m_libdir );
++ if ( nLibDirPos >= 0 ) {
++ m_zips.push_back(
++ std::make_pair(
++ url.replaceAt( nLibDirPos, m_libdir.getLength(), m_datadir ),
++ css::uno::Reference< css::container::XNameAccess >()));
++ }
++}
++
+ void ImplImageTree::resetZips() {
+ m_zips.clear();
+ {
+@@ -284,19 +304,14 @@ void ImplImageTree::resetZips() {
+ b.appendAscii(RTL_CONSTASCII_STRINGPARAM("_brand.zip"));
+ bool ok = u.Append(b.makeStringAndClear(), INetURLObject::ENCODE_ALL);
+ OSL_ASSERT(ok); (void) ok;
+- m_zips.push_back(
+- std::make_pair(
+- u.GetMainURL(INetURLObject::NO_DECODE),
+- css::uno::Reference< css::container::XNameAccess >()));
++ addUrlToZips(u.GetMainURL(INetURLObject::NO_DECODE));
+ }
+ {
+ rtl::OUString url(
+ RTL_CONSTASCII_USTRINGPARAM(
+ "$BRAND_BASE_DIR/share/config/images_brand.zip"));
+ rtl::Bootstrap::expandMacros(url);
+- m_zips.push_back(
+- std::make_pair(
+- url, css::uno::Reference< css::container::XNameAccess >()));
++ addUrlToZips(url);
+ }
+ {
+ rtl::OUString url(
+@@ -310,10 +310,7 @@
+ b.appendAscii(RTL_CONSTASCII_STRINGPARAM(".zip"));
+ bool ok = u.Append(b.makeStringAndClear(), INetURLObject::ENCODE_ALL);
+ OSL_ASSERT(ok); (void) ok;
+- m_zips.push_back(
+- std::make_pair(
+- u.GetMainURL(INetURLObject::NO_DECODE),
+- css::uno::Reference< css::container::XNameAccess >()));
++ addUrlToZips(u.GetMainURL(INetURLObject::NO_DECODE));
+ }
+ if ( m_style == "default" )
+ {
+@@ -321,9 +333,7 @@ void ImplImageTree::resetZips() {
+ RTL_CONSTASCII_USTRINGPARAM(
+ "$BRAND_BASE_DIR/share/config/images.zip"));
+ rtl::Bootstrap::expandMacros(url);
+- m_zips.push_back(
+- std::make_pair(
+- url, css::uno::Reference< css::container::XNameAccess >()));
++ addUrlToZips(url);
+ }
+ }
+
+diff --git a/xmlhelp/source/cxxhelp/provider/provider.cxx b/xmlhelp/source/cxxhelp/provider/provider.cxx
+index e55fe5d..848bed7 100644
+--- a/xmlhelp/source/cxxhelp/provider/provider.cxx
++++ b/xmlhelp/source/cxxhelp/provider/provider.cxx
+@@ -335,7 +335,7 @@ void ContentProvider::init()
+ rtl::OUString(RTL_CONSTASCII_USTRINGPARAM( " " )) +
+ setupextension );
+
+- uno::Sequence< rtl::OUString > aImagesZipPaths( 2 );
++ uno::Sequence< rtl::OUString > aImagesZipPaths( 3 );
+ xHierAccess = getHierAccess( sProvider, "org.openoffice.Office.Common" );
+
+ rtl::OUString aPath( getKey( xHierAccess, "Path/Current/UserConfig" ) );
+@@ -344,6 +344,15 @@ void ContentProvider::init()
+
+ aPath = rtl::OUString(RTL_CONSTASCII_USTRINGPARAM("$BRAND_BASE_DIR/share/config"));
+ rtl::Bootstrap::expandMacros(aPath);
++ aImagesZipPaths[ 2 ] = aPath;
++
++ // try also /usr/share and even before /usr/lib
++ ::rtl::OUString aDataDir = ::rtl::OUString::createFromAscii ( "/usr/share/" );
++ ::rtl::OUString aLibDir = ::rtl::OUString::createFromAscii ( "/usr/lib/" );
++ sal_Int32 nLibDirPos = aPath.indexOf( aLibDir );
++
++ if ( nLibDirPos >= 0 )
++ aPath = aPath.replaceAt( nLibDirPos, aLibDir.getLength(), aDataDir );
+ aImagesZipPaths[ 1 ] = aPath;
+
+ uno::Reference< uno::XComponentContext > xContext;
--- /dev/null
+Index: libreoffice-3.6.2~rc1/officecfg/registry/data/org/openoffice/Office/Common.xcu
+===================================================================
+--- libreoffice-3.6.2~rc1.orig/officecfg/registry/data/org/openoffice/Office/Common.xcu 2012-10-07 21:03:17.662850386 -0400
++++ libreoffice-3.6.2~rc1/officecfg/registry/data/org/openoffice/Office/Common.xcu 2012-10-07 21:03:57.174850591 -0400
+@@ -655,7 +655,7 @@
+ </node>
+ <node oor:name="ExternalMailer" install:module="unixdesktop">
+ <prop oor:name="Program">
+- <value oor:external="com.sun.star.configuration.backend.DesktopBackend ExternalMailer"/>
++ <value>sensible-lomua</value>
+ </prop>
+ </node>
+ <node oor:name="Font">
+Index: libreoffice-3.6.2~rc1/shell/source/unix/misc/senddoc.sh
+===================================================================
+--- libreoffice-3.6.2~rc1.orig/shell/source/unix/misc/senddoc.sh 2012-10-07 21:03:17.662850386 -0400
++++ libreoffice-3.6.2~rc1/shell/source/unix/misc/senddoc.sh 2012-10-07 21:29:13.074858447 -0400
+@@ -59,6 +59,32 @@
+ shift
+ fi
+
++case `basename "$MAILER"` in
++ sensible-lomua)
++ if [ -x /usr/bin/xdg-email ] ; then
++ MAILER=/usr/bin/xdg-email
++ elif [ -n "$KDE_FULL_SESSION" -a -x /usr/bin/kde-open ] \
++ || [ -x /usr/bin/gnome-open ] \
++ || [ -x /usr/bin/xdg-open ]; then
++ # use an undefined mailer, to trigger the default handling
++ MAILER=undefined
++ elif [ -n "$GNOME_DESKTOP_SESSION_ID" -a -x /usr/bin/evolution ]; then
++ MAILER=/usr/bin/evolution
++ elif [ -n "$KDE_FULL_SESSION" -a -x /usr/bin/kmail ]; then
++ MAILER=/usr/bin/kmail
++ elif [ -x /usr/bin/evolution ]; then
++ # default
++ MAILER=/usr/bin/evolution
++ elif [ -x /usr/bin/icedove ]; then
++ # fallback
++ MAILER=/usr/bin/icedove
++ elif [ -x /usr/bin/thunderbird ]; then
++ # fallback
++ MAILER=/usr/bin/thunderbird
++ fi
++ ;;
++esac
++
+ # autodetect mail client from executable name
+ case $(basename "$MAILER" | sed 's/-.*$//') in
+
--- /dev/null
+no-check-if-root.diff
+debian-opt.diff
+jurt-soffice-location.diff
+split-evoab.diff
+debian-debug.diff
+#fix-system-lpsolve-build.diff
+build-against-shared-lpsolve.diff
+install-fixes.diff
+mention-java-common-package.diff
+help-msg-add-package-info.diff
+sensible-lomua.diff
+reportdesign-mention-package.diff
+jdbc-driver-classpaths.diff
+mysqlcppconn-libmysqlclient-SONAME.diff
+#search-usr-share-for-images.diff
+make-package-modules-not-suck.diff
+mediwiki-oor-replace.diff
+debian-hardened-buildflags-CPPFLAGS.diff
+debian-hardened-buildflags-no-LO-fstack-protector-strong.diff
+disable-flaky-tests.diff
+#dont-touch-urd.diff
+fix-internal-hsqldb-build.diff
+javadoc-optional.diff
+hppa-is-32bit.diff
+no-packagekit-per-default.diff
+system-officeotron-and-odfvalidator.diff
+allow-opensymbol-rebuild.diff
+no-openssl.diff
+disable-some-sc-tests-with-internal-cppunit.diff
+cppunit-optional.diff
+disable-unused-test-programs.diff
+apparmor-complain.diff
+hide-math-desktop-file.patch
+appstream-ignore-startcenter.diff
+disable-java-in-odk-build-examples-on-zero-vm.diff
+do-not-hide-test-output.diff
+no-ant-check-if-unneeded.diff
+test-apparmor-profiles.diff
+apparmor-allow-java.security.diff
+apparmor-kde.diff
+apparmor-cleanups.diff
+fix-tests-openjdk11.patch
+apparmor-mesa.diff
+disableClassPathURLCheck.diff
+use-mariadb-java-instead-of-mysql-java.diff
+mdds-1.4.1.diff
+orcus-0.14.diff
+m68k-fix-parameter-type.patch
+apparmor-opencl.diff
+tdf123077.diff
+java.vendor-Debian.diff
+jp-JP-Reiwa.diff
+sanitize-LibreLogo-calls.diff
+explictly-exclude-LibreLogo-from-XScript-usage.diff
+More-uses-of-referer-URL-with-SvxBrushItem.diff
+expand-LibreLogo-checks-to-global-events.diff
+decode-url-escape-codes-and-check-each-path-segment.diff
+keep-name-percent-encoded.diff
+Properly-obtain-location.diff
+expand-pyuno-path-separators.diff
+construct-final-url-from-parsed-output.diff
+an-absolute-uri-is-invalid-input.diff
+Improve-check-for-absolute-URI.diff
+Improve-check.diff
+allow-link-updates-in-an-intermediate-linked-document.diff
+Postgresql-12-no-adsrc.diff
--- /dev/null
+diff --git a/scp2/source/gnome/file_gnome.scp b/scp2/source/gnome/file_gnome.scp
+index c7a13c8..a3f59a6 100644
+--- a/scp2/source/gnome/file_gnome.scp
++++ b/scp2/source/gnome/file_gnome.scp
+@@ -25,3 +25,13 @@ File gid_File_Share_Registry_Gnome_Xcd
+ Name = "gnome.xcd";
+ End
+ #endif
++
++#ifdef ENABLE_EVOAB2
++File gid_File_Share_Registry_Evoab_Xcd
++ TXT_FILE_BODY;
++ Styles = (PACKED);
++ Dir = gid_Brand_Dir_Share_Registry;
++ Name = "evoab.xcd";
++End
++#endif
++
+diff --git a/scp2/source/gnome/module_gnome.scp b/scp2/source/gnome/module_gnome.scp
+index 08d9efe..492e274 100644
+--- a/scp2/source/gnome/module_gnome.scp
++++ b/scp2/source/gnome/module_gnome.scp
+@@ -31,6 +31,9 @@ Module gid_Module_Optional_Gnome
+ #if ENABLE_GIO
+ ,gid_File_Share_Registry_Gnome_Xcd
+ #endif
++#ifdef ENABLE_EVOAB2
++ ,gid_File_Share_Registry_Evoab_Xcd
++#endif
+ );
+ End
+
+diff --git a/postprocess/CustomTarget_registry.mk b/postprocess/CustomTarget_registry.mk
+index 510b444..3ff190f 100644
+--- a/postprocess/CustomTarget_registry.mk
++++ b/postprocess/CustomTarget_registry.mk
+@@ -331,8 +331,9 @@ ifneq ($(WITH_WEBDAV),)
+ postprocess_FILES_main += $(postprocess_MOD)/org/openoffice/ucb/Configuration-webdav.xcu
+ endif
+ ifeq ($(ENABLE_EVOAB2),TRUE)
+-postprocess_FILES_main += $(call gb_XcuModuleTarget_get_target,connectivity/registry/evoab2)/org/openoffice/Office/DataAccess/Drivers-evoab2.xcu
+-postprocess_FILES_main += $(postprocess_MOD)/org/openoffice/Office/DataAccess-evoab2.xcu
++postprocess_XCDS += evoab.xcd
++postprocess_FILES_evoab += $(call gb_XcuModuleTarget_get_target,connectivity/registry/evoab2)/org/openoffice/Office/DataAccess/Drivers-evoab2.xcu
++postprocess_FILES_evoab += $(postprocess_MOD)/org/openoffice/Office/DataAccess-evoab2.xcu
+ postprocess_DRIVERS += evoab
+ endif
+ ifeq ($(ENABLE_JAVA),TRUE)
+diff --git a/scp2/InstallModule_gnome.mk b/scp2/InstallModule_gnome.mk
+index c33f4f52d67b..8f06c0273eff 100644
+--- a/scp2/InstallModule_gnome.mk
++++ b/scp2/InstallModule_gnome.mk
+@@ -19,4 +19,8 @@ $(eval $(call gb_InstallModule_add_localized_scpfiles,scp2/gnome,\
+ scp2/source/gnome/module_gnome \
+ ))
+
++$(eval $(call gb_InstallModule_define_if_set,scp2/gnome,\
++ ENABLE_EVOAB2 \
++))
++
+ # vim: set shiftwidth=4 tabstop=4 noexpandtab:
--- /dev/null
+diff --git a/bin/odfvalidator.sh.in b/bin/odfvalidator.sh.in
+index 56e2f29..9415ef6 100644
+--- a/bin/odfvalidator.sh.in
++++ b/bin/odfvalidator.sh.in
+@@ -1,2 +1,2 @@
+ #!/usr/bin/env bash
+-java -Djavax.xml.validation.SchemaFactory:http://relaxng.org/ns/structure/1.0=org.iso_relax.verifier.jaxp.validation.RELAXNGSchemaFactoryImpl -Dorg.iso_relax.verifier.VerifierFactoryLoader=com.sun.msv.verifier.jarv.FactoryLoaderImpl -jar @TARFILE_LOCATION@/@ODFVALIDATOR_JAR@ -e "$@"
++java -Djavax.xml.validation.SchemaFactory:http://relaxng.org/ns/structure/1.0=org.iso_relax.verifier.jaxp.validation.RELAXNGSchemaFactoryImpl -Dorg.iso_relax.verifier.VerifierFactoryLoader=com.sun.msv.verifier.jarv.FactoryLoaderImpl -jar /usr/share/java/odfvalidator.jar -e "$@"
+diff --git a/bin/officeotron.sh.in b/bin/officeotron.sh.in
+index 7281f1b..6eab5b5 100644
+--- a/bin/officeotron.sh.in
++++ b/bin/officeotron.sh.in
+@@ -1,2 +1,2 @@
+ #!/usr/bin/env bash
+-java -jar @TARFILE_LOCATION@/@OFFICEOTRON_JAR@ "$@"
++java -jar /usr/share/java/officeotron.jar "$@"
--- /dev/null
+From f8bef86cc88e99b32e223b2bd675959c6d8e46ad Mon Sep 17 00:00:00 2001
+From: Michael Weghorn <m.weghorn@posteo.de>
+Date: Thu, 31 Jan 2019 09:52:51 +0100
+Subject: tdf#123077 gtk3_kde5: Set KFileWidget's custom widget only once
+
+Since the event filter is only used to set the custom
+widget in the KFileWidget, it can and needs to be removed
+again once this has been done; which also avoids crashes.
+
+(s. https://gerrit.libreoffice.org/#/c/67185/ for more
+infos, where the same thing is done for kde5)
+
+Change-Id: I5c719fb17510916b4730ed5c00bb638df2f183e3
+Reviewed-on: https://gerrit.libreoffice.org/67184
+Tested-by: Jenkins
+Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
+(cherry picked from commit 30cc54a4532a732a0cf6dfe9943521978ff7292f)
+Reviewed-on: https://gerrit.libreoffice.org/67204
+Reviewed-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>
+---
+ vcl/unx/gtk3_kde5/kde5_filepicker.cxx | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/vcl/unx/gtk3_kde5/kde5_filepicker.cxx b/vcl/unx/gtk3_kde5/kde5_filepicker.cxx
+index 42e278a..804aaa6 100644
+--- a/vcl/unx/gtk3_kde5/kde5_filepicker.cxx
++++ b/vcl/unx/gtk3_kde5/kde5_filepicker.cxx
+@@ -241,7 +241,11 @@ bool KDE5FilePicker::eventFilter(QObject* o, QEvent* e)
+ {
+ KWindowSystem::setMainWindow(w, _winId);
+ if (auto* fileWidget = w->findChild<KFileWidget*>({}, Qt::FindDirectChildrenOnly))
++ {
+ fileWidget->setCustomWidget(_extraControls);
++ // remove event filter again; the only purpose was to set the custom widget here
++ qApp->removeEventFilter(this);
++ }
+ }
+ }
+ return QObject::eventFilter(o, e);
+--
+cgit v1.1
+
--- /dev/null
+From 92e09eda030a7fb63339954078bbc64d83f834b1 Mon Sep 17 00:00:00 2001
+From: Rene Engelhard <rene@debian.org>
+Date: Wed, 13 Jun 2018 21:37:12 +0200
+Subject: [PATCH] test apparmor profile parsing (see tdf#114915)
+
+idea taken from
+https://salsa.debian.org/apparmor-team/apparmor-profiles-extra/commit/7fbcc4788d0e94764eeeff2f080796601241f986#546c1096cd506dbb01a47ed87a636a8e94d83b8c
+
+Change-Id: I7e5bda9224d69530af4d30422c2fd3d60c9929d6
+---
+ sysui/desktop/share/apparmor.sh | 13 +++++++++----
+ 1 file changed, 9 insertions(+), 4 deletions(-)
+
+diff --git a/sysui/desktop/share/apparmor.sh b/sysui/desktop/share/apparmor.sh
+index 253fe87cf78d..c801f0f3b217 100755
+--- a/sysui/desktop/share/apparmor.sh
++++ b/sysui/desktop/share/apparmor.sh
+@@ -19,16 +19,17 @@ INST_ROOT=$1 #Where libreoffice program folder can be found
+ PROFILESFROM=$2 #Where the profile files are
+ INSTALLTO=$3 #Where should the apparmor profiles (For manual use should be /etc/apparmor.d)
+ RESTART=$4 #Should we restart apparmor using service?
++CHECK=$5 #Check parsing of the new profile?
+
+ #Example uses:
+ #Ubuntu 16.04 with stock LibreOffice:
+-# sudo ./sysui/desktop/share/apparmor.sh /usr/lib/libreoffice/ sysui/desktop/apparmor/ /etc/apparmor.d/ true
++# sudo ./sysui/desktop/share/apparmor.sh /usr/lib/libreoffice/ sysui/desktop/apparmor/ /etc/apparmor.d/ true true
+
+ #Ubuntu 16.04, with built debs from LibreOffice git
+-# sudo ./sysui/desktop/share/apparmor.sh /opt/libreofficedev5.2/ sysui/desktop/apparmor/ /etc/apparmor.d/ true
++# sudo ./sysui/desktop/share/apparmor.sh /opt/libreofficedev5.2/ sysui/desktop/apparmor/ /etc/apparmor.d/ true true
+
+ #Ubuntu 16.04, running from git!
+-# sudo ./sysui/desktop/share/apparmor.sh /mnt/store/git/libo/instdir/ sysui/desktop/apparmor/ /etc/apparmor.d/ true
++# sudo ./sysui/desktop/share/apparmor.sh /mnt/store/git/libo/instdir/ sysui/desktop/apparmor/ /etc/apparmor.d/ true true
+
+ #Need to convert / to . for profile names
+ INST_ROOT_FORMAT=${INST_ROOT/\//}
+@@ -43,7 +44,11 @@ do
+ tourl=$INSTALLTO$INST_ROOT_FORMAT${filename##*/}
+ sed "s/INSTDIR-/$INST_ROOT_SED/g" "$filename" > "$tourl"
+ echo "$tourl"
+-
++ if [ "$CHECK" = "true" ]; then
++ # check profile parsing
++ echo "Checking $tourl profile."
++ /sbin/apparmor_parser --add --skip-cache --skip-kernel-load $tourl
++ fi
+ done
+
+ if [ "$RESTART" = true ] ; then
+--
+2.17.1
+
--- /dev/null
+>From 1172166889764ae0e77488e5d173f33961b9859b Mon Sep 17 00:00:00 2001
+From: Markus Koschany <apo@debian.org>
+Date: Fri, 9 Nov 2018 23:06:15 +0100
+Subject: [PATCH] mariadb
+
+---
+ connectivity/qa/complex/connectivity/JdbcLongVarCharTest.java | 4 ++--
+ .../mysql/org/openoffice/Office/DataAccess/Drivers.xcu | 2 +-
+ connectivity/source/drivers/mysql/YDriver.cxx | 4 ++--
+ 3 files changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/connectivity/qa/complex/connectivity/JdbcLongVarCharTest.java b/connectivity/qa/complex/connectivity/JdbcLongVarCharTest.java
+index a44f1b9d1..03a8293ef 100644
+--- a/connectivity/qa/complex/connectivity/JdbcLongVarCharTest.java
++++ b/connectivity/qa/complex/connectivity/JdbcLongVarCharTest.java
+@@ -59,7 +59,7 @@ public class JdbcLongVarCharTest extends ComplexTestCase
+
+ String url = "jdbc:mysql://localhost:3306/mysql?user=root";
+ com.sun.star.beans.PropertyValue prop[] = new PropertyValue[1];
+- prop[0] = new PropertyValue("JavaDriverClass", 0, "com.mysql.jdbc.Driver", PropertyState.DIRECT_VALUE);
++ prop[0] = new PropertyValue("JavaDriverClass", 0, "org.mariadb.jdbc.Driver", PropertyState.DIRECT_VALUE);
+
+ // get the remote office component context
+ XMultiServiceFactory xServiceManager = param.getMSF();
+@@ -117,4 +117,4 @@ public class JdbcLongVarCharTest extends ComplexTestCase
+ System.exit(0);
+ }
+ }
+-}
+\ No newline at end of file
++}
+diff --git a/connectivity/registry/mysql/org/openoffice/Office/DataAccess/Drivers.xcu b/connectivity/registry/mysql/org/openoffice/Office/DataAccess/Drivers.xcu
+index 77988448f..acd8bfdaf 100644
+--- a/connectivity/registry/mysql/org/openoffice/Office/DataAccess/Drivers.xcu
++++ b/connectivity/registry/mysql/org/openoffice/Office/DataAccess/Drivers.xcu
+@@ -33,7 +33,7 @@
+ </node>
+ <node oor:name="JavaDriverClass" oor:op="replace">
+ <prop oor:name="Value" oor:type="xs:string">
+- <value>com.mysql.jdbc.Driver</value>
++ <value>org.mariadb.jdbc.Driver</value>
+ </prop>
+ </node>
+ <node oor:name="AddIndexAppendix" oor:op="replace">
+diff --git a/connectivity/source/drivers/mysql/YDriver.cxx b/connectivity/source/drivers/mysql/YDriver.cxx
+index 95094265e..c0ad7802e 100644
+--- a/connectivity/source/drivers/mysql/YDriver.cxx
++++ b/connectivity/source/drivers/mysql/YDriver.cxx
+@@ -54,7 +54,7 @@ namespace connectivity
+ css::uno::Sequence<css::beans::PropertyValue> const & info)
+ {
+ return comphelper::NamedValueCollection(info).getOrDefault(
+- "JavaDriverClass", OUString("com.mysql.jdbc.Driver"));
++ "JavaDriverClass", OUString("org.mariadb.jdbc.Driver"));
+ }
+ }
+
+@@ -185,7 +185,7 @@ namespace connectivity
+ aProps.push_back( PropertyValue(
+ "JavaDriverClass"
+ ,0
+- ,makeAny(OUString("com.mysql.jdbc.Driver"))
++ ,makeAny(OUString("org.mariadb.jdbc.Driver"))
+ ,PropertyState_DIRECT_VALUE) );
+ }
+ }
+--
+2.19.1
+
--- /dev/null
+libreoffice (1:3.5.2-2) unstable; urgency=low
+
+ * The script provider for python (which was in python3-uno before) has been
+ split out into libreoffice-script-provider-python as it's the same in both
+ variants and python3-uno should contain just the module anyway.
+
+ If you relied on python3-uno for the script provider, install the new
+ package in addition.
+
+ -- Rene Engelhard <rene@debian.org> Sat, 07 Apr 2012 14:30:41 +0200
+
--- /dev/null
+#!/usr/bin/make -f
+################################################################################
+# LibreOffice source package rules file
+#
+# Please see debian/README for detailed documentation about the build system, and
+# how to build LibreOffice.
+################################################################################
+# Authors:
+# Chris Halls <halls@debian.org>
+# Rene Engelhard <rene@debian.org>
+# Copyright 2002-2015 Software in the Public Interest, Inc.
+# Portions Copyright 2010 Canonical Ltd. Author: Matthias Klose
+# Portions Copyright 2011-2013 Canonical Ltd. Author: Bjoern Michaelsen
+# Licensed under the GNU General Public License, version 2. See the file
+# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
+################################################################################
+
+vafilt = $(subst $(2)=,,$(filter $(2)=%,$(1)))
+
+include /usr/share/dpkg/pkg-info.mk
+CURDIR ?= $(realpath $(dir $(firstword $(MAKEFILE_LIST)))/..)
+BASE_VERSION:=$(shell echo $(DEB_VERSION) | cut -d: -f1):$(DEB_VERSION_UPSTREAM)
+BINARY_VERSION=$(DEB_VERSION)
+#HELP_L10N_VIRTUAL_VERSION:=$(shell echo $(DEB_VERSION_UPSTREAM) | cut -d: -f2 | tr [~] [\\-])
+HELP_L10N_VIRTUAL_VERSION:=6.1
+OOVER:=6.1
+NEXT_OOVER:=$(shell echo "$(OOVER) + 0.1" | bc)
+
+ARCH_INDEP_PACKAGES := $(shell dh_listpackages -i)
+ARCH_DEP_PACKAGES := $(shell dh_listpackages -a)
+PACKAGES := $(ARCH_INDEP_PACKAGES) $(ARCH_DEP_PACKAGES)
+
+include /usr/share/dpkg/architecture.mk
+include /usr/share/dpkg/vendor.mk
+SHELL:=/bin/bash
+
+#SYSTEM_GCC_VERSION = $(shell gcc --version | sed -n '/^gcc/s/.*\(.\..\)\..$$/\1/p')
+#FIXME
+SYSTEM_GCC_VERSION = $(shell gcc --version | sed -n '/^gcc/s/.*\(.\..\)\../\1/p' | cut -d" " -f1)
+ifeq "$(shell dpkg --compare-versions $(SYSTEM_GCC_VERSION) ge 5 && echo true)" "true"
+ GCC_VERSION_5_OR_GREATER=y
+endif
+
+PKGDIR:=debian/libreoffice
+OODIRNAME=libreoffice
+OODIR:=usr/lib/$(OODIRNAME)
+OOSDKDIR:=$(OODIR)/sdk
+
+# Figure out who's building this package.
+OOO_VENDOR:=The Document Foundation/Debian
+ifeq "$(DEB_VENDOR)" "Ubuntu"
+OOO_VENDOR=The Document Foundation, Debian and Ubuntu
+endif
+export OOO_VENDOR
+
+# debhelper
+export DH_OPTIONS
+export DH_ALWAYS_EXCLUDE=CVS:.svn:.bzr:.git
+#export DH_VERBOSE=1
+# quilt
+export QUILT_PATCHES=debian/patches
+export QUILT_OPTIONS="-p1 -F0"
+
+SOURCE_TREE=.
+STAMP_DIR=debian/stampdir
+TARFILE_LOCATION=$(CURDIR)/tarballs
+export TARFILE_LOCATION
+USE_SOURCE_TARBALLS=n
+USE_GIT_TARBALLS=n
+ifeq "$(USE_GIT_TARBALLS)" "y"
+GIT_BASEURL:=git://anongit.freedesktop.org/libreoffice
+lo_sources_ver=$(shell grep AC_INIT $(SOURCE_TREE)/configure.ac | grep documentfoundation | cut -d, -f2 | sed -e 's,\[,,' -e 's,\],,')
+# NOT in proper libreoffice-3-6 branch
+# use ./g checkout -b tag-libreoffice-3.6.2.1 libreoffice-3.6.2.1
+GIT_TAG=libreoffice-$(lo_sources_ver)
+GIT_BRANCH=libreoffice-6-1-5
+endif
+ifeq "$(USE_SOURCE_TARBALLS)" "y"
+lo_sources_ver=$(shell cat $(CURDIR)/sources.ver | cut -d= -f2)
+endif
+
+#########
+# Default package configuration
+#
+OOO_ARCHS = alpha amd64 arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390 s390x sparc sparc64
+PATCHSET=$(DEB_VENDOR)
+BUILD_DEPS=\
+ autoconf,\
+ automake,\
+ bc,\
+ bison,\
+ bzip2,\
+ flex (>= 2.3.35), \
+ fontforge-nox | fontforge, \
+ gperf,\
+ libc0.1 (>= 2.10.2-7) [kfreebsd-any],\
+ libcups2-dev,\
+ libfontconfig1-dev,\
+ libfreetype6-dev (>= 2.2.0),\
+ libgl1-mesa-dev,\
+ libice-dev,\
+ libsm-dev,\
+ libx11-dev,\
+ libxaw7-dev,\
+ libxext-dev,\
+ libxinerama-dev,\
+ libxkbfile-dev,\
+ libxrender-dev,\
+ libxt-dev,\
+ libxtst-dev,\
+ pkg-config,\
+ unzip,\
+ x11proto-render-dev,\
+ xsltproc,\
+ zip,\
+ zlib1g-dev\
+
+BUILD_DEPS_INDEP += rdfind, symlinks
+
+# These are components which can be built from internal copies, or used from the
+# distribution. See configure --help for valid values (--with-system-<value>).
+SYSTEM_STUFF = dicts
+
+ENABLE_PYTHON=y
+ifeq "$(ENABLE_PYTHON)" "y"
+ CONFIGURE_FLAGS += --with-python=system
+ ENABLE_SCRIPT_PROVIDER_PYTHON=y
+ PACKAGE_LIBRELOGO=y
+endif
+# THIS IS ONLY FOR TESTING. When building against a specified pythonX.Y
+# this will work inside OOo but *not* from outside OOo unless the user
+# uses pythonX.Y directly (and the dh_pycentral-created dependencies allow
+# also the non-working default python then) - see e.g. #587402. Also
+# note we are NOT working with python < 2.6 anymore!
+PYTHON_VERSION=current
+ifeq "$(PYTHON_VERSION)" "current"
+ PYTHON=python3
+ export PYTHON
+else
+ # somehow configure insists on using python3 "for pyuno". The only way to
+ # override this (afaics) is this...
+ PYTHON=python$(PYTHON_VERSION)
+ PYTHON_CFLAGS=$(shell pkg-config --cflags python-$(PYTHON_VERSION))
+ PYTHON_LIBS=$(shell pkg-config --libs python-$(PYTHON_VERSION))
+ export PYTHON PYTHON_VERSION PYTHON_CFLAGS PYTHON_LIBS
+endif
+BUILD_ONLY_EN_US=n
+ENABLE_JAVA=y
+ifeq "$(ENABLE_JAVA)" "y"
+ JDK=default
+ include /usr/share/java/java_defaults.mk
+ ifneq "$(JDK)" "default"
+ JAVA_MAINVER=7
+ endif
+endif
+JAVAHELPER_MIN_VERSION= (>= 0.37~)
+SYSTEM_STUFF += hunspell
+HUNSPELL_MIN_VER= (>= 1.1.5-2)
+SYSTEM_STUFF += altlinuxhyph
+USE_LIBHYPHEN=y
+LIBHYPHEN_MINVER= (>= 2.4)
+SYSTEM_STUFF += boost
+BOOST_VERSION=default
+ifeq "$(BOOST_VERSION)" "default"
+ ifeq "$(GCC_VERSION_5_OR_GREATER)" "y"
+ BOOST_MINVER= (>= 1.58)
+ else
+ BOOST_MINVER= (>= 1.55)
+ endif
+endif
+SYSTEM_STUFF += mdds
+USE_EXTERNAL_CXXLIBS=y
+SYSTEM_STUFF += mythes
+SYSTEM_STUFF += icu
+ICU_MINVER= (>= 52)
+SYSTEM_STUFF += librevenge
+SYSTEM_STUFF += libwpd libwpg libwps
+SYSTEM_STUFF += libvisio
+SYSTEM_STUFF += libcdr
+SYSTEM_STUFF += libmspub
+SYSTEM_STUFF += libmwaw
+SYSTEM_STUFF += libodfgen
+SYSTEM_STUFF += libepubgen
+SYSTEM_STUFF += libetonyek
+SYSTEM_STUFF += libfreehand
+# this is libe-book, NOT evolutions libebook (which is
+# dlopen()'ed anyway and whose headers we need from the
+# system anyways if enabled
+SYSTEM_STUFF += libebook
+SYSTEM_STUFF += libabw
+SYSTEM_STUFF += libpagemaker
+SYSTEM_STUFF += libzmf
+SYSTEM_STUFF += libstaroffice
+SYSTEM_STUFF += libqxp
+BUILD_CAIROCANVAS=y
+SYSTEM_STUFF += cairo
+CAIRO_FONTS_PATCH=y
+BUILD_KDE=y
+BUILD_KDE4=n
+# < 4.8 fails with gcc 4.7, see #667911
+QT4_MINVER= (>= 4:4.8)
+KDELIBS_MINVER= (>= 4:4.3.4)
+BUILD_KDE5=y
+ifeq "$(DEB_HOST_ARCH_BITS)" "64"
+ENABLE_QT5=n
+endif
+QT5_MINVER= (>= 5.6)
+ifeq "$(BUILD_KDE)" "y"
+ ENABLE_GTK3_KDE5=y
+ ENABLE_KDE5=n
+ KDE_MAJOR=5
+endif
+ifeq "$(BUILD_KDE)" "y"
+ifeq "$(BUILD_KDE4)" "y"
+ifeq "$(BUILD_KDE5)" "y"
+ $(error only either KDE4 or KDE5 supported)
+endif
+endif
+endif
+# https://www.debian.org/doc/debian-policy/ says this is not defined and must
+# be ignored, but dh_strip mentions (and honours) it, so...
+ifneq (noautodbgsym,$(findstring noautodbgsym,$(DEB_BUILD_OPTIONS)))
+BUILD_DBGSYM_PACKAGES=y
+ifeq "$(DEB_HOST_ARCH)" "amd64"
+USE_DWZ=n
+DWZ_ARGS:=-L 100000000
+endif
+endif
+SYSTEM_STUFF += xmlsec
+
+# this changes the packages built/contents of packages (-subsequentcheckbase)
+# This is not exactly allowed in https://wiki.debian.org/BuildProfileSpec#Registered_profile_names
+# but it doesn't have real practical difference, does it?
+ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ BUILD_TEST_PACKAGES=y
+endif
+
+ifneq ($(MAKECMDGOALS),build-indep)
+ENABLE_SYMBOLS=y
+SMALL_SYMBOLS=y
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ SYSTEM_STUFF += beanshell
+ SYSTEM_STUFF += hsqldb
+ HSQLDB_MINVER= (>> 1.8.0.10)
+ HSQLDB_TOONEWVER=1.8.1
+ HSQLDB_JAR=/usr/share/java/hsqldb1.8.0.jar
+endif
+SYSTEM_STUFF += lpsolve
+USE_SHARED_LPSOLVE=y
+LPSOLVE_MIN_VERSION= (>= 5.5.0.13-5+b1)
+ENABLE_COINMP=y
+SYSTEM_STUFF += coinmp
+USE_DBUS=y
+ifeq "$(USE_DBUS)" "y"
+ ifeq (,$(findstring linux,$(DEB_HOST_ARCH_OS)))
+ ENABLE_BLUETOOTH=n
+ else
+ ENABLE_BLUETOOTH=y
+ SYSTEM_STUFF += bluez
+ endif
+ ENABLE_PACKAGEKIT=n
+endif
+ENABLE_AVAHI=y
+USE_GSTREAMER=y
+USE_VLC=y
+ENABLE_WEBDAV=y
+ifeq "$(ENABLE_WEBDAV)" "y"
+WEBDAV_LIB=neon
+ ifeq "$(WEBDAV_LIB)" "neon"
+ SYSTEM_STUFF += neon
+ NEON_SECTYPE=gnutls
+ NEONSONR=27
+ else
+ SYSTEM_STUFF += apr
+ SYSTEM_STUFF += serf
+ endif
+endif
+SYSTEM_STUFF += redland
+PACKAGE_SDK=y
+ifneq ($(filter nodoc,$(DEB_BUILD_PROFILES)),)
+PACKAGE_SDK_DOCS=n
+else
+PACKAGE_SDK_DOCS=y
+endif
+PACKAGE_LOKIT=y
+ENABLE_CHART_TESTS=n
+ENABLE_EXPORT_VALIDATION_TESTS=n
+JUNIT_MIN_VER= (>= 4.8.2-2)
+USE_LIBCURL4=y
+CURL_SECTYPE=gnutls
+USE_LIBSUITESPARSE=y
+SUITESPARSE_MIN_VERSION= (>= 1:3.4.0)
+PARALLEL_BUILD=y
+ENABLE_LDAP=y
+USE_OPENLDAP=y
+SYSTEM_STUFF += epoxy
+ifeq "$(ENABLE_JAVA)" "y"
+ ENABLE_REPORTBUILDER=y
+ SYSTEM_STUFF += jfreereport
+ ENABLE_MEDIAWIKI=y
+ SYSTEM_STUFF += apache-commons
+ ENABLE_SCRIPT_PROVIDER_BSH=y
+ ENABLE_SCRIPT_PROVIDER_JS=y
+ ENABLE_NLPSOLVER=y
+else
+ ENABLE_REPORTBUILDER=n
+ ENABLE_MEDIAWIKI=n
+ ENABLE_SCRIPT_PROVIDER_BSH=n
+ ENABLE_SCRIPT_PROVIDER_JS=n
+ ENABLE_NLPSOLVER=n
+endif
+ENABLE_SDBC_POSTGRESQL=y
+BUILD_GTK=y
+#ifeq "$(DEB_DISTRIBUTION)" "experimental"
+BUILD_GTK3=y
+#endif
+ifeq "$(BUILD_GTK3)" "y"
+ENABLE_INTROSPECTION=y
+endif
+ENABLE_EVO2=y
+ENABLE_GIO=y
+ENABLE_DCONF=y
+ENABLE_RANDR=y
+PACKAGE_BASE=y
+SYSTEM_STUFF += graphite
+SYSTEM_STUFF += harfbuzz
+ALLOC=system
+SYSTEM_STUFF += libexttextcat
+SYSTEM_STUFF += cppunit
+CPPUNIT_MINVER=1.14
+DEFAULT_IMAGE=tango
+IMAGES:=$(DEFAULT_IMAGE) colibre sifr sifr_dark breeze breeze_dark elementary
+CONFIGURE_FLAGS_INDEP += --with-theme="$(IMAGES)"
+DICT_DIR=/usr/share/hunspell
+HYPH_DIR=/usr/share/hyphen
+THES_DIR=/usr/share/mythes
+SYSTEM_STUFF += libcmis
+ifeq "$(GCC_VERSION_5_OR_GREATER)" "y"
+LIBCMIS_MINVER=0.5.0-3
+else
+LIBCMIS_MINVER=0.5.0
+endif
+ENABLE_MYSQLNATIVE=y
+MYSQL_FLAVOUR=default
+# set this also to y for system-mysql..
+SYSTEM_STUFF += mariadb
+SYSTEM_STUFF += mysql-cppconn
+ifeq "$(GCC_VERSION_5_OR_GREATER)" "y"
+ ifneq (,$(filter libcmis, $(SYSTEM_STUFF)))
+ ifeq "$(shell dpkg --compare-versions `dpkg -l libcmis-dev | grep ^ii | awk '{ print $$3 }'` ge 0.5.2~ && echo true)" "true"
+ MYSQLCPPCONN_MINVER= (>= 1.1.9-4)
+ else
+ MYSQLCPPCONN_MINVER= (>= 1.1.7-4)
+ endif
+ else
+ MYSQLCPPCONN_MINVER= (>= 1.1.7-4)
+ endif
+else
+MYSQLCPPCONN_MINVER= (>= 1.1.0~r791)
+endif
+SYSTEM_STUFF += postgresql
+SYSTEM_STUFF += jpeg
+SYSTEM_STUFF += libxml
+SYSTEM_STUFF += expat
+SYSTEM_STUFF += odbc
+SYSTEM_STUFF += curl
+SYSTEM_STUFF += sane
+SYSTEM_STUFF += poppler
+SYSTEM_STUFF += libpng
+SYSTEM_STUFF += nss
+ENABLE_HELP=y
+ifeq "$(ENABLE_HELP)" "y"
+ ENABLE_HTML_HELP=y
+ ifeq "$(ENABLE_HTML_HELP)" "y"
+ HELP_DEPENDS := libreoffice-help-common (= $${binary:Version}), firefox-esr | epiphany-browser | konqueror | chromium | firefox
+ HELP_COMMON_DEPENDS := libjs-normalize.css
+ else
+ HELP_DEPENDS := libreoffice-writer
+ DEBHELPER_OPTIONS += -Nlibreoffice-help-common
+ endif
+ SYSTEM_STUFF += clucene
+ ifeq "$(GCC_VERSION_5_OR_GREATER)" "y"
+ CLUCENE_MINVER=2.3.3.4-4.1
+ else
+ CLUCENE_MINVER=2.3.3.4-2
+ endif
+endif
+SYSTEM_STUFF += lcms2
+SYSTEM_STUFF += openldap
+PACKAGE_UNOWINREG_DLL=y
+ifeq "$(DEB_VENDOR)" "Debian"
+BUILD_UNOWINREG_DLL=y
+endif
+FAKEROOT_LIBDIR=/usr/lib/$(DEB_HOST_MULTIARCH)/libfakeroot
+SYSTEM_STUFF += liblangtag
+SYSTEM_STUFF += orcus
+LIBORCUS_MINVER=0.14.0+really0.14.0
+USE_UCPP=y
+ifeq "$(USE_UCPP)" "y"
+ SYSTEM_STUFF += ucpp
+endif
+# kfreebsd runs into SIZE_MAX problems, and the rest might
+# get OOM (mips(el)...) so enable mergelibs only for 64bit
+# archs (exception: i386)
+ifeq (,$(findstring kfreebsd,$(DEB_HOST_ARCH)))
+ ifeq "$(DEB_HOST_ARCH_BITS)" "64"
+ ENABLE_MERGELIBS=y
+ else
+ ifeq "$(DEB_HOST_ARCH)" "i386"
+ ENABLE_MERGELIBS=y
+ endif
+ endif
+endif
+#ifeq "$(ENABLE_MERGELIBS)" "y"
+# ENABLE_LTO=y
+#else
+ ENABLE_LTO=n
+#endif
+USE_OPENCL=y
+#10:15 <@_rene_> ahunt: I remember you wanted to do some endian things? did it
+# ever get done?
+#10:15 -!- xrmx [~rm@2-228-255-178.ip194.fastwebnet.it] has joined
+# #libreoffice-dev
+#10:15 <@_rene_> ahunt: for firebird sdbc that is
+#10:15 -!- xrmx [~rm@2-228-255-178.ip194.fastwebnet.it] has quit [Changing host]
+#10:15 -!- xrmx [~rm@unaffiliated/xrmx] has joined #libreoffice-dev
+#10:15 <@_rene_> because I just remember I still have
+#https://buildd.debian.org/status/fetch.php?pkg=libreoffice&arch=powerpc&ver=1%3
+#
+#10:16 < ahunt> _rene_: Not yet -- I still need to get round to actually
+# debugging within firebird itself to make it work.
+#10:16 < ahunt> _rene_: Yup, basically we're not endian portable yet.
+#10:16 <@_rene_> An uncaught exception of type com.sun.star.sdbc.SQLException
+#10:16 <@_rene_> - firebird_sdbc error:
+#10:16 <@_rene_> *unsupported on-disk structure for file
+# /tmp/lu4va82l.tmp/firebird.fdb; found 2
+#10:16 <@_rene_> 944.512, support 11.2
+#10:16 < xrmx> morning
+#10:16 <@_rene_> aha, so disable firebird on be?
+#10:16 <@_rene_> (for now)
+#10:16 < Safa_[A_boy]> Hello. About converting dialogs to .ui files, What about
+# wizards?
+#10:17 < ahunt> _rene_: yes, unfortunately.
+ENABLE_FIREBIRD=y
+ifeq "$(ENABLE_FIREBIRD)" "y"
+ SYSTEM_STUFF += firebird
+ ifeq (,$(filter firebird, $(SYSTEM_STUFF)))
+ SYSTEM_STUFF += libatomic-ops
+ SYSTEM_STUFF += libtommath
+ endif
+endif
+ENABLE_EOT=y
+ifeq "$(ENABLE_EOT)" "y"
+SYSTEM_STUFF += libeot
+endif
+SYSTEM_STUFF += glm
+BUILD_PPC64EL=y
+BUILD_ARM64=y
+SYSTEM_STUFF += gpgmepp
+INSTALL_APPARMOR_PROFILES=y
+ENABLE_APPARMOR_PROFILES=y
+CHECK_APPARMOR_PROFILES=true
+ENABLE_LIBNUMBERTEXT=y
+SYSTEM_STUFF += libnumbertext
+
+# Default flags to pass to configure
+CONFIGURE_FLAGS= \
+ --with-vendor='$(OOO_VENDOR)' \
+ --with-build-version='$(DEB_VERSION)' \
+ --prefix=/usr --mandir=/usr/share/man \
+ --docdir=/usr/share/doc/libreoffice \
+ --libdir=/usr/lib \
+ --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \
+ --disable-online-update \
+ --disable-fetch-external \
+ --without-fonts --enable-build-opensymbol \
+ --without-myspell-dicts \
+ --with-branding=$(CURDIR)/debian/branding
+
+ifeq "$(ENABLE_HELP)" "y"
+CONFIGURE_FLAGS_INDEP+= --with-help
+ ifeq "$(ENABLE_HTML_HELP)" "y"
+ CONFIGURE_FLAGS_INDEP+= --with-help=html
+ endif
+endif
+
+ifeq "$(shell echo $(DEB_VERSION_UPSTREAM) | grep -E '(alpha|beta)'; echo $$?)" "1"
+CONFIGURE_FLAGS += --enable-release-build
+RELEASE_BUILD := y
+endif
+
+ifeq "$(DEB_DISTRIBUTION)" "UNRELEASED"
+ENABLE_DEPENDENCY_TRACKING=y
+endif
+ifeq "$(DEB_DISTRIBUTION)" "UNRELEASED"
+BUGS=mailto:debian-openoffice@lists.debian.org
+endif
+
+ifneq (terse,$(findstring terse,$(DEB_BUILD_OPTIONS)))
+export verbose=t
+endif
+
+CONFIGURE_FLAGS += --with-alloc=$(ALLOC)
+
+#############
+# Architecture-specific changes
+
+# helper to generate no_archs macros (pass name of source macro)
+define gen_no_archs
+ _no_arch_macro = $(subst OOO_,OOO_NO_,$1)
+ _no_arch_tmp_$1 = $$(foreach _a,$$(filter-out $$(call $1),$(OOO_ARCHS)),!$$(_a))
+ $$(_no_arch_macro) = $$(if $$(_no_arch_tmp_$1),$$(_empty) [$$(_no_arch_tmp_$1)])
+endef
+
+PLATFORMID := $(shell grep PLATFORMID debian/vars.$(DEB_HOST_ARCH) | cut -d"=" -f2)
+
+
+# let's do this only on archs where we have chromium, which is supposedly even only the archs
+# where alsp pdfium is supported.
+OOO_PDFIUM_ARCHS := i386 amd64 armhf arm64
+ifneq (,$(findstring $(DEB_HOST_ARCH),$(OOO_PDFIUM_ARCHS)))
+ENABLE_PDFIUM=y
+else
+ENABLE_PDFIUM=n
+endif
+
+OOO_64BIT_ARCHS = $(filter alpha amd64 arm64 ia64 kfreebsd-amd64 mips64 mips64el ppc64 ppc64el s390x sparc64, $(OOO_ARCHS))
+$(eval $(call gen_no_archs,OOO_64BIT_ARCHS))
+OOO_BE_ARCHS = $(filter hppa m68k mips mips64 powerpc powerpcspe ppc64 s390 s390x sparc sparc64,$(OOO_ARCHS))
+OOO_LE_ARCHS = $(filter-out $(OOO_BE_ARCHS),$(OOO_ARCHS))
+$(eval $(call gen_no_archs,OOO_LE_ARCHS))
+
+OOO_CHECK_ARCHS := $(filter-out kfreebsd-i386 kfreebsd-amd64 $(OOO_BE_ARCHS),$(OOO_ARCHS))
+$(eval $(call gen_no_archs,OOO_CHECK_ARCHS))
+#OOO_JUNIT_ARCHS := i386 amd64 armhf arm64
+OOO_JUNIT_ARCHS := amd64 arm64
+$(eval $(call gen_no_archs,OOO_JUNIT_ARCHS))
+#OOO_CHECK_FATAL_ARCHS := i386 amd64 armhf arm64
+OOO_CHECK_FATAL_ARCHS := amd64 arm64
+
+ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ ifeq ($(DEB_HOST_ARCH),$(findstring $(DEB_HOST_ARCH),$(OOO_CHECK_ARCHS)))
+ ifneq "$(DEB_HOST_ARCH_ENDIAN)" "big"
+ RUN_MAKE_CHECK=y
+ endif
+ endif
+ ifeq "$(ENABLE_JAVA)" "y"
+ ifeq ($(DEB_HOST_ARCH),$(findstring $(DEB_HOST_ARCH),$(OOO_JUNIT_ARCHS)))
+ ENABLE_JUNIT4=y
+ endif
+ endif
+ IGNORE_MAKE_CHECK_FAILURES=-
+ ifeq ($(DEB_HOST_ARCH),$(findstring $(DEB_HOST_ARCH),$(OOO_CHECK_FATAL_ARCHS)))
+ IGNORE_MAKE_CHECK_FAILURES:=
+ endif
+endif
+
+# Java...
+ifeq "$(JDK)" "default"
+OOO_JAVA_ARCHS = $(filter $(OOO_ARCHS),$(java6_architectures))
+else
+OOO_JAVA_ARCHS = $(OOO_ARCHS)
+endif
+$(eval $(call gen_no_archs,OOO_JAVA_ARCHS))
+
+OOO_ARCH_DEP_EXTENSIONS_ARCHS := $(OOO_ARCHS)
+OOO_EXTENSIONS_ARCHS := $(OOO_ARCH_DEP_EXTENSIONS_ARCHS)
+
+OOO_BASE_ARCHS := $(OOO_JAVA_ARCHS)
+$(eval $(call gen_no_archs,OOO_BASE_ARCHS))
+OOO_REPORTBUILDER_ARCHS := $(OOO_BASE_ARCHS)
+$(eval $(call gen_no_archs,OOO_REPORTBUILDER_ARCHS))
+OOO_FIREBIRD_ARCHS := $(OOO_BASE_ARCHS)
+$(eval $(call gen_no_archs,OOO_FIREBIRD_ARCHS))
+
+ifneq (,$(findstring $(DEB_HOST_ARCH),$(OOO_NO_BASE_ARCHS)))
+ ifneq ($(DEB_HOST_ARCH),$(findstring $(DEB_HOST_ARCH),$(OOO_BASE_ARCHS)))
+ PACKAGE_BASE=n
+ ENABLE_SDBC_POSTGRESQL=n
+ ENABLE_MYSQLNATIVE=n
+ ENABLE_EVO2=n
+ ENABLE_REPORTBUILDER=n
+ DEBHELPER_OPTIONS += -Nlibreoffice-base libreoffice-base-core -Nlibreoffice-base-drivers
+ DEBHELPER_OPTIONS += -Nlibreoffice-evolution
+ DEBHELPER_OPTIONS += -Nlibreoffice-sdbc-postgresql -Nlibreoffice-mysql-connector
+ DEBHELPER_OPTIONS += -Nlibreoffice-sdbc-hsqldb -Nlibreoffice-sdbc-firebird
+ DEBHELPER_OPTIONS += -Nlibreoffice-report-builder-bin -Nlibreoffice-report-builder
+# CONFIGURE_FLAGS += --disable-database-connectivity
+ endif
+endif
+
+ifeq (,$(findstring $(DEB_HOST_ARCH),$(OOO_ARCH_DEP_EXTENSIONS_ARCHS)))
+ ENABLE_MYSQLNATIVE=n
+ DEBHELPER_OPTIONS += -Nlibreoffice-mysql-connector
+ DEBHELPER_OPTIONS += -Nlibreoffice-presentation-minimizer
+endif
+ifeq (,$(findstring $(DEB_HOST_ARCH),$(OOO_EXTENSIONS_ARCHS)))
+ ENABLE_MEDIAWIKI=n
+ ENABLE_REPORTBUILDER=n
+ ENABLE_NLPSOLVER=n
+ DEBHELPER_OPTIONS += -Nlibreoffice-wiki-publisher -Nlibreoffice-script-provider-python -Nlibreoffice-nlpsolver
+ CONFIGURE_FLAGS += --disable-extension-integration --disable-extensions
+else
+ CONFIGURE_FLAGS += --enable-extension-integration
+endif
+
+ifeq (,$(filter $(DEB_HOST_ARCH),$(OOO_JAVA_ARCHS)))
+ ENABLE_JAVA=n
+ ENABLE_REPORTBUILDER=n
+ ENABLE_MEDIAWIKI=n
+ ENABLE_NLPSOLVER=n
+ DEBHELPER_OPTIONS += -Nlibreoffice-wiki-publisher
+ DEBHELPER_OPTIONS += -Nlibreoffice-report-builder-bin -Nlibreoffice-report-builder
+ DEBHELPER_OPTIONS += -Nlibreoffice-nlpsolver
+endif
+
+# disable SRB on ia64 when building with internal jfreereport.
+# fails to build. ("The system is out of resources."). FIXME.
+ifeq (ia64,$(findstring ia64,$(OOO_OPENJDK_ARCHS)))
+ ifeq (,$(findstring jfreereport,$(SYSTEM_STUFF)))
+ OOO_REPORTBUILDER_ARCHS := $(filter-out ia64,$(OOO_REPORTBUILDER_ARCHS))
+ ifeq "$(DEB_HOST_ARCH)" "ia64"
+ ENABLE_REPORTBUILDER=n
+ endif
+ endif
+endif
+
+ifeq "$(BUILD_TEST_PACKAGES)" "n"
+ DEBHELPER_OPTIONS += -Nlibreoffice-subsequentcheckbase
+endif
+
+ifneq (,$(findstring mips, $(OOO_ARCHS)))
+ BUILD_DEPS += , binutils (>= 2.23) [mips mipsel], libc6 (>= 2.17-6) [mips mipsel]
+endif
+
+#############
+# Distro-specific overrides
+
+# Debian Stretch
+ifeq "$(DEB_DISTRIBUTION)" "stretch-backports"
+ BUGS=mailto:debian-backports@lists.debian.org
+ SYSTEM_STUFF := $(filter-out libzmf libstaroffice orcus cppunit xmlsec libqxp libepubgen mdds libnumbertext,$(SYSTEM_STUFF))
+ # needs newer stuff for tests, we can't make it conditional on RUN_MAKE_CHECK since
+ # BE archs don't run them anyway and this wouldn't be in effect...
+ SYSTEM_STUFF := $(filter-out libwps libmwaw libetonyek,$(SYSTEM_STUFF))
+ HELP_COMMON_DEPENDS :=
+ USE_DWZ := n
+ STRETCH_BACKPORT=y
+endif
+
+ifeq "$(BUILD_DBGSYM_PACKAGES)" "y"
+UNO_LIBS_DBG=uno-libs3-dbgsym
+URE_DBG=ure-dbgsym
+CORE_DBG=libreoffice-core-dbgsym
+WRITER_DBG=libreoffice-writer-dbgsym
+URE_DBG_ROOT=.debhelper/ure/dbgsym-root
+UNO_LIBS_DBG_ROOT=.debhelper/uno-libs3/dbgsym-root
+CORE_DBG_ROOT=.debhelper/libreoffice-core/dbgsym-root
+WRITER_DBG_ROOT=.debhelper/libreoffice-writer/dbgsym-root
+else
+DH_STRIP_DBG_OPTION_LO += --no-automatic-dbgsym
+DH_STRIP_DBG_OPTION_URE += --no-automatic-dbgsym
+DH_STRIP_DBG_OPTION_UNO_LIBS3 += --no-automatic-dbgsym
+endif
+
+CONFIGURE_FLAGS += $(foreach i, $(SYSTEM_STUFF),--with-system-$(i))
+
+CC_PREFIX:=$(shell gcc -dumpmachine)-
+
+USE_CLANG=n
+ifeq "$(USE_CLANG)" "y"
+ CLANG_VERSION=default
+ ENABLE_COMPILER_PLUGINS=n
+endif
+
+ifneq "$(USE_CLANG)" "y"
+ ifneq "$(GCC_VERSION)" ""
+ ifneq "$(SYSTEM_GCC_VERSION)" "$(GCC_VERSION)"
+ BUILD_DEPS += , gcc-$(GCC_VERSION), g++-$(GCC_VERSION)
+ CONFIGURE_FLAGS+= \
+ CC=$(CC_PREFIX)gcc-$(GCC_VERSION) \
+ CXX=$(CC_PREFIX)g++-$(GCC_VERSION)
+ endif
+ endif
+ BUILD_DEPS += , gcc (>= 4:7) [m68k], g++ (>= 4:7) [m68k]
+else
+ ifeq "$(CLANG_VERSION)" "default"
+ CLANG=clang
+ BUILD_DEPS += , clang
+ CONFIGURE_FLAGS+= CC=clang CXX=clang++
+ else
+ CLANG=clang-$(CLANG_VERSION)
+ BUILD_DEPS += , clang-$(CLANG_VERSION)
+ CONFIGURE_FLAGS+= CC=clang-$(CLANG_VERSION) CXX=clang++-$(CLANG_VERSION)
+ endif
+ ifeq "$(ENABLE_COMPILER_PLUGINS)" "y"
+ CONFIGURE_FLAGS += --enable-compiler-plugins
+ CLANGDIR := /usr/lib/llvm-$(shell $(CLANG) --version | head -n 1 | awk '{ print $$3 }' | cut -d. -f1,2)
+ ifeq "$(CLANG_VERSION)" "default"
+ BUILD_DEPS += , libclang-dev
+ else
+ BUILD_DEPS += , libclang-$(CLANG_VERSION)-dev
+ endif
+ endif
+endif
+USE_GOLD=n
+ENABLE_CXX17=y
+ifeq "$(ENABLE_CXX17)" "n"
+ CONFIGURE_FLAGS += --disable-c++17
+endif
+
+ifeq "$(USE_DWZ)" "y"
+ BUILD_DEPS += , debhelper (>= 10.10.4)
+ BUILD_DEPS += , dwz
+endif
+
+ifneq "$(PACKAGE_SDK)" "y"
+ CONFIGURE_FLAGS += --disable-odk
+ ifneq "$(PACKAGE_SDK_DOCS)" "y"
+ CONFIGURE_FLAGS += --without-doxygen --without-javadoc
+ endif
+else
+ ifeq "$(PACKAGE_SDK_DOCS)" "y"
+ BUILD_DEPS_INDEP += , doxygen (>= 1.8.4) <!nodoc>, graphviz <!nodoc>
+ else
+ CONFIGURE_FLAGS += --without-doxygen --without-javadoc
+ endif
+endif
+
+ BUILD_DEPS += , libpoppler-dev (>= 0.12.0), libpoppler-private-dev, libpoppler-cpp-dev
+
+ifeq "$(ENABLE_PDFIUM)" "n"
+ CONFIGURE_FLAGS += --disable-pdfium
+endif
+
+ifneq (,$(filter graphite, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libgraphite2-dev (>= 0.9.3)
+endif
+
+ifneq (,$(filter harfbuzz, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libharfbuzz-dev (>= 0.9.42)
+endif
+
+ifneq (,$(filter libexttextcat, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libexttextcat-dev (>= 3.4.1)
+ TEXTCAT_DATA_RECOMMENDS := libexttextcat-data
+endif
+
+ifeq "$(ENABLE_LIBNUMBERTEXT)" "y"
+ ifneq (,$(filter libnumbertext, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libnumbertext-dev
+ NUMBERTEXT_DATA_RECOMMENDS := libnumbertext-data
+ endif
+else
+ CONFIGURE_FLAGS += --disable-libnumbertext
+endif
+
+ifneq (,$(filter jpeg, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libjpeg-dev
+endif
+ifneq (,$(filter libxml, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libxml2-dev (>= 2.8), libxml2-utils
+ BUILD_DEPS += , libxslt1-dev
+else
+ CONFIGURE_FLAGS += --without-system-libxml
+endif
+ifneq (,$(filter xmlsec, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libxmlsec1-dev (>= 1.2.24)
+endif
+ifneq (,$(filter expat, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libexpat1-dev
+endif
+ifneq (,$(filter odbc, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , unixodbc-dev (>= 2.2.11)
+endif
+ifneq (,$(filter sane, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libsane-dev
+endif
+ifneq (,$(filter libpng, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libpng-dev
+endif
+
+ifneq (,$(filter curl, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libcurl4-$(CURL_SECTYPE)-dev
+endif
+
+ifeq "$(GCC_VERSION_5_OR_GREATER)" "y"
+COINMP_MINVER=(>= 1.7.6+dfsg1-2)
+ ifeq "$(STRETCH_BACKPORT)" "y"
+ COINUTILS_MINVER=(>= 2.9.15-3.1)
+ else
+ COINUTILS_MINVER=(>= 2.10.14+repack1-1)
+ # go sure given #873362
+ COINMP_MINVER=(>= 1.8.3-2)
+ endif
+else
+COINMP_MINVER=
+COINUTILS_MINVER=
+endif
+ifneq ($(ENABLE_COINMP),y)
+ CONFIGURE_FLAGS += --disable-coinmp
+else
+ ifneq (,$(filter coinmp, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , coinor-libcoinmp-dev $(COINMP_MINVER), coinor-libcoinutils-dev $(COINUTILS_MINVER)
+ # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=838620
+ ifeq "$(STRETCH_BACKPORT)" "y"
+ BUILD_DEPS += , libbz2-dev
+ endif
+ endif
+endif
+
+ifneq (,$(findstring i386,$(DEB_HOST_ARCH)))
+ SMALL_SYMBOLS = n
+else
+ ifneq (,$(findstring amd64,$(DEB_HOST_ARCH)))
+ SMALL_SYMBOLS = n
+ endif
+endif
+
+ifeq "$(ENABLE_SYMBOLS)" "y"
+ # Small symbols?
+ ifeq "$(SMALL_SYMBOLS)" "y"
+ CONFIGURE_FLAGS += --enable-symbols=SMALL
+ DEB_CFLAGS_MAINT_STRIP := -g
+ DEB_CXXFLAGS_MAINT_STRIP := -g
+ DEB_CFLAGS_MAINT_PREPEND += -g1
+ DEB_CXXFLAGS_MAINT_PREPEND += -g1
+export DEB_CFLAGS_MAINT_STRIP DEB_CXXFLAGS_MAINT_STRIP
+export DEB_CFLAGS_MAINT_PREPEND DEB_CXXFLAGS_MAINT_PREPEND
+ else
+ CONFIGURE_FLAGS += --enable-symbols
+ endif
+else
+ DEB_CFLAGS_MAINT_STRIP := -g
+ DEB_CXXFLAGS_MAINT_STRIP := -g
+export DEB_CFLAGS_MAINT_STRIP DEB_CXXFLAGS_MAINT_STRIP
+endif
+export DPKG_EXPORT_BUILDFLAGS=y
+include /usr/share/dpkg/buildflags.mk
+ifeq (debug,$(findstring debug,$(DEB_BUILD_OPTIONS)))
+ CONFIGURE_FLAGS += --enable-debug
+endif
+ifeq (noopt,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ CONFIGURE_FLAGS += --disable-optimized
+endif
+
+ifeq "$(ENABLE_PYTHON)" "y"
+PYMAJOR:=$(shell $(PYTHON) -c "import sys; print (sys.version_info[0])")
+PYMINOR:=$(shell $(PYTHON) -c "import sys; print (sys.version_info[1])")
+PYMINORPLUS1:=$(shell $(PYTHON) -c "import sys; print (sys.version_info[1]+1)")
+PYTHON_SITE:=debian/python3-uno/$(shell $(PYTHON) -c 'from distutils import sysconfig; print(sysconfig.get_python_lib())')
+endif
+
+ BUILD_DEPS += , $(PYTHON)
+ifeq "$(ENABLE_PYTHON)" "y"
+ BUILD_DEPS += , $(PYTHON)-dev (>= 3.3)
+ ifneq "$(STRETCH_BACKPORT)" "y"
+ BUILD_DEPS += , $(PYTHON)-distutils
+ endif
+ BUILD_DEPS += , dh-python
+ ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ BUILD_DEPS += , $(PYTHON)-lxml <!nocheck>
+ else
+ CONFIGURE_FLAGS += --without-lxml
+ endif
+endif
+
+ BUILD_DEPS += , debhelper (>= 10)
+ifeq "$(BUILD_DBGSYM_PACKAGES)" "y"
+ # from debhelper changelog
+ BUILD_DEPS += , dpkg-dev (>= 1.18.2~)
+else
+ BUILD_DEPS += , dpkg-dev (>= 1.17.14)
+endif
+
+ifeq "$(RUN_TESTTOOL)" "y"
+ CONFIGURE_FLAGS += --enable-hids
+endif
+ BUILD_DEPS += , locales$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS += , gdb$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS += , fontconfig$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS += , fonts-liberation2$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS += , fonts-crosextra-carlito$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ # https://lists.freedesktop.org/archives/libreoffice/2017-May/077764.html
+ BUILD_DEPS += , fonts-dejavu$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ ifeq "$(RUN_MAKE_CHECK)" "y"
+ ifneq (,$(filter cppunit, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libcppunit-dev (>= $(CPPUNIT_MINVER))$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ endif
+ # 17:35 <@sberg_> vmiklos, oh, what kind of poor test is that? "warn:sal.osl:3785:2:sal/osl/unx/process.cxx:344: ChildStatusProc : starting 'pstoedit' failed" etc. is what I see in workdir/CppunitTest/filter_eps_test.test.log...
+ BUILD_DEPS += , pstoedit$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS += , imagemagick$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS += , ghostscript$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ BUILD_DEPS += , hunspell-en-us$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ else
+ CONFIGURE_FLAGS += --without-cppunit
+ endif
+ ifeq "$(ENABLE_JUNIT4)" "y"
+ BUILD_DEPS += , junit4 $(JUNIT_MIN_VER) [$(OOO_JUNIT_ARCHS)] <!nocheck>
+ else
+ CONFIGURE_FLAGS += --without-junit
+ endif
+ ifeq "$(ENABLE_CHART_TESTS)" "y"
+ CONFIGURE_FLAGS += --enable-chart-tests
+ endif
+ ifeq "$(ENABLE_EXPORT_VALIDATION_TESTS)" "y"
+ BUILD_DEPS += , libofficeotron-java$(OOO_NO_CHECK_ARCHS) <!nocheck>, libodfvalidator-java$(OOO_NO_CHECK_ARCHS) <!nocheck>
+ else
+ CONFIGURE_FLAGS += --without-export-validation
+ endif
+ifneq "$(BUILD_ONLY_EN_US)" "y"
+ ifeq (lang=,$(findstring lang=,$(DEB_BUILD_OPTIONS)))
+ ISOS=$(shell echo "$(DEB_BUILD_OPTIONS) " | sed -n 's/^.*lang=\([^\s].*\)\s.*/\1/p' | awk '{ print $$1 }' | sed -e 's/,/ /g')
+ ifeq "$(ENABLE_HELP)" "n"
+ HELPISOS=
+ else
+ HELPISOS=$(shell echo "$(DEB_BUILD_OPTIONS) " | sed -n 's/^.*lang=\([^\s].*\)\s.*/\1/p' | awk '{ print $$1 }' | sed -e 's/,/ /g')
+ endif
+ LANGPACKISOS=$(shell echo "$(DEB_BUILD_OPTIONS) " | sed -n 's/^.*lang=\([^\s].*\)\s.*/\1/p' | awk '{ print $$1 }' | sed -e 's/,/ /g')
+ else
+ # Note that the first one here *has to be* en-US. the first one gets
+ # gid_Module_Root as filelist later and the rest gid_Module_Root.$iso
+ # but we can't/shouldn't do dynamic switching, so let en-US be the first
+ # one to that gid_Module_Root always is english and the other langpacks
+ # have gid_Module_Root.$iso
+ #ISOS=$(shell $(SOURCE_TREE)/bin/lo-xlate-lang -i all')
+ ISOS:=en-US af am ar as ast be bg bn br bs ca ca-valencia cs cy da de dz el \
+ en-GB en-ZA eo es et eu fa fi fr ga gd gl gu gug he hi hr hu id is it ja \
+ ka kk km kmr-Latn kn ko lt lv mk mn ml mr nb ne nl nn nr nso oc om or \
+ pa-IN pl pt pt-BR ro ru rw si sk sl sr sr-Latn ss st sv \
+ ta te tg th tn tr ts ug uk uz ve vi xh zh-CN zh-TW zu
+ ifeq "$(ENABLE_HELP)" "n"
+ HELPISOS:=
+ else
+ #HELPISOS:=$(shell $(SOURCE_TREE)/bin/lo-xlate-lang -i all')
+ HELPISOS:=en-US ca ca-valencia cs da de dz el en-GB es et eu fi fr gl hi hu it \
+ ja km ko nl om pl pt pt-BR ru sk sl sv tr vi zh-CN zh-TW
+ endif
+ #LANGPACKISOS:=$(shell $(SOURCE_TREE)/bin/lo-xlate-lang -i all')
+ LANGPACKISOS:=en-US af am ar as ast be bg bn br bs ca ca-valencia cs cy da de dz el \
+ en-GB en-ZA eo es et eu fa fi fr ga gd gl gu gug he hi hr hu id is it ja \
+ ka kk km kmr-Latn kn ko lt lv mk mn ml mr nb ne nl nn nr nso oc om or \
+ pa-IN pl pt pt-BR ro ru rw si sk sl sr sr-Latn ss st sv \
+ ta te tg th tn tr ts ug uk uz ve vi xh zh-CN zh-TW zu
+ endif
+else
+ ISOS=en-US
+ ifeq "$(ENABLE_HELP)" "n"
+ HELPISOS=
+ else
+ HELPISOS=en-US
+ endif
+ LANGPACKISOS=en-US
+endif
+BUILD_ISOS = $(ISOS)
+
+ifneq "$(BUILD_ONLY_EN_US)" "y"
+ ifneq "$(BUILD_ISOS)" "en-US"
+ CONFIGURE_FLAGS_LANG += --with-lang="$(BUILD_ISOS)"
+ CONFIGURE_FLAGS_INDEP += $(CONFIGURE_FLAGS_LANG)
+ BUILD_DEPS_INDEP += , gettext
+ endif
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ BUILD_DEPS += , maven-repo-helper
+ ifeq "$(JDK)" "default"
+ JAVA_HOME=/usr/lib/jvm/default-java
+ ifneq "$(STRETCH_BACKPORT)" "y"
+ BUILD_DEPS += , java-common (>= 0.61)
+ DEFAULT_JDK := $(call java_dependency, default-jdk)
+ BUILD_DEPS += , $(shell echo $(DEFAULT_JDK) | sed -e 's/default-jdk/default-jdk (>= 1:1.6)/' | sed -e "s/\]/ !i386]/")
+ else
+ BUILD_DEPS += , java-common (>= 0.49)
+ BUILD_DEPS += , default-jdk (>= 1:1.6) $(shell echo "$(filter-out !ia64,$(OOO_NO_JAVA_ARCHS))")
+ endif
+ ifneq "$(STRETCH_BACKPORT)" "y"
+ ifeq (i386,$(findstring i386,$(OOO_JAVA_ARCHS)))
+ BUILD_DEPS += , default-jdk (>= 2:1.9) [i386]
+ endif
+ endif
+ ifneq (,$(findstring ia64,$(OOO_JAVA_ARCHS)))
+ BUILD_DEPS += , default-jdk (>= 1:1.7-48) [ia64]
+ endif
+ ifneq (,$(findstring kfreebsd,$(OOO_JAVA_ARCHS)))
+ BUILD_DEPS += , default-jdk (>= 2:1.7-52.1) [kfreebsd-any]
+ endif
+ ifneq (,$(findstring sparc64,$(OOO_JAVA_ARCHS)))
+ BUILD_DEPS += , default-jdk (>= 2:1.8-55) [sparc64]
+ endif
+ endif
+ ifeq "$(JDK)" "openjdk"
+ ifeq "$(JAVA_MAINVER)" "6"
+ BUILD_DEPS += , openjdk-$(JAVA_MAINVER)-jdk (>= 6b23~pre8-2) [$(filter-out ia64,$(OOO_JAVA_ARCHS)])
+ else
+ BUILD_DEPS += , openjdk-$(JAVA_MAINVER)-jdk [$(filter-out mips mipsel,$(OOO_JAVA_ARCHS))]
+ # no 7 on mips(el)
+ ifneq (,$(findstring mips,$(OOO_JAVA_ARCHS)))
+ BUILD_DEPS += , openjdk-6-jdk (>= 6b23~pre8-2) [mips mipsel]
+ ifneq (,$(findstring mips,$(DEB_HOST_ARCH)))
+ JAVA_MAINVER=6
+ endif
+ endif
+ endif
+ JAVA_HOME=/usr/lib/jvm/java-$(JAVA_MAINVER)-openjdk-$(DEB_HOST_ARCH)
+ endif
+ TEST_JAVA_HOME=$(JAVA_HOME)
+ ifeq "$(ENABLE_MEDIAWIKI)" "y"
+ BUILD_DEPS_INDEP += , ant (>= 1.7.0)$(OOO_NO_JAVA_ARCHS), ant-optional (>= 1.7.0)$(OOO_NO_JAVA_ARCHS)
+ else
+ # report-builder is done in build-arch already
+ ifneq (,$(filter jfreereport, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , ant (>= 1.6.5)$(OOO_NO_JAVA_ARCHS)
+ else
+ BUILD_DEPS_INDEP += , ant (>= 1.6.5)$(OOO_NO_JAVA_ARCHS)
+ endif
+ endif
+ JAVA_RUNTIME_DEPENDS = default-jre
+ ifneq (,$(filter $(DEB_HOST_ARCH), $(OOO_OPENJDK_ARCHS)))
+ ifneq "$(DEB_HOST_ARCH)" "ia64"
+ JAVA_RUNTIME_DEPENDS += | openjdk-9-jre | openjdk-8-jre | openjdk-7-jre | openjdk-6-jre
+ else
+ JAVA_RUNTIME_DEPENDS += | openjdk-7-jre
+ endif
+ endif
+ ifneq (,$(filter $(DEB_HOST_ARCH), amd64 i386))
+ JAVA_RUNTIME_DEPENDS += | sun-java6-jre
+ endif
+ JAVA_RUNTIME_DEPENDS += | java6-runtime
+ # Suns Java "packages"
+ JAVA_RUNTIME_DEPENDS += | jre
+export JAVA_HOME
+ CONFIGURE_FLAGS += --with-jdk-home=$(JAVA_HOME)
+ JAVA_COMMON_DEPENDS= , libreoffice-java-common
+ JAVA_COMMON_DEPENDS_VERSION:= (>= $(BASE_VERSION)~)
+ ifeq "$(PACKAGE_SDK)" "y"
+ ifeq "$(PACKAGE_UNOWINREG_DLL)" "y"
+ ifeq "$(BUILD_UNOWINREG_DLL)" "y"
+ CONFIGURE_FLAGS_INDEP += --enable-build-unowinreg
+ BUILD_DEPS_INDEP += , g++-mingw-w64-i686
+ CONFIGURE_FLAGS_INDEP += --with-mingw-cross-compiler=i686-w64-mingw32-g++
+ endif
+ endif
+ endif
+ ifeq "$(ENABLE_MEDIAWIKI)" "y"
+ CONFIGURE_FLAGS_INDEP += --enable-ext-wiki-publisher
+ endif
+ ifeq "$(ENABLE_REPORTBUILDER)" "y"
+ # report-builder
+ ifneq (,$(filter jfreereport, $(SYSTEM_STUFF)))
+ REPORT_BUILDER_BUILD_DEPS += , libbase-java$(OOO_NO_REPORTBUILDER_ARCHS), libsac-java$(OOO_NO_REPORTBUILDER_ARCHS), libxml-java (>= 1.1.6)$(OOO_NO_REPORTBUILDER_ARCHS), libflute-java (>= 1.1.6)$(OOO_NO_REPORTBUILDER_ARCHS), libpentaho-reporting-flow-engine-java (>= 0.9.4)$(OOO_NO_REPORTBUILDER_ARCHS), liblayout-java (>= 0.2.10)$(OOO_NO_REPORTBUILDER_ARCHS), libloader-java (>= 1.1.6)$(OOO_NO_REPORTBUILDER_ARCHS), libformula-java (>= 1.1.7)$(OOO_NO_REPORTBUILDER_ARCHS), librepository-java (>= 1.1.6)$(OOO_NO_REPORTBUILDER_ARCHS), libfonts-java (>= 1.1.6)$(OOO_NO_REPORTBUILDER_ARCHS), libserializer-java (>= 1.1.6)$(OOO_NO_REPORTBUILDER_ARCHS)
+ REPORT_BUILDER_JAR_DEPENDS := , libbase-java, libsac-java, libxml-java (>= 1.1.6), libflute-java (>= 1.1.6), libpentaho-reporting-flow-engine-java (>= 0.9.4), liblayout-java (>= 0.2.10), libloader-java (>= 1.1.6), libformula-java (>= 1.1.7), librepository-java (>= 1.1.6), libfonts-java (>= 1.1.6), libserializer-java (>= 1.1.6)
+ CONFIGURE_FLAGS += --with-libbase-jar=/usr/share/java/libbase.jar --with-libxml-jar=/usr/share/java/libxml.jar --with-flute-jar=/usr/share/java/flute.jar --with-jfreereport-jar=/usr/share/java/flow-engine.jar --with-liblayout-jar=/usr/share/java/liblayout.jar --with-libloader-jar=/usr/share/java/libloader.jar --with-libformula-jar=/usr/share/java/libformula.jar --with-librepository-jar=/usr/share/java/librepository.jar --with-libfonts-jar=/usr/share/java/libfonts.jar --with-libserializer-jar=/usr/share/java/libserializer.jar
+ endif
+ ifneq (,$(filter apache-commons, $(SYSTEM_STUFF)))
+ REPORT_BUILDER_BUILD_DEPS += , libcommons-logging-java$(OOO_NO_JAVA_ARCHS)
+ REPORT_BUILDER_JAR_DEPENDS += , libcommons-logging-java
+ CONFIGURE_FLAGS += --with-commons-logging-jar=/usr/share/java/commons-logging.jar
+ endif
+ BUILD_DEPS += $(REPORT_BUILDER_BUILD_DEPS)
+ else
+ CONFIGURE_FLAGS += --disable-report-builder
+ endif
+ ifeq "$(ENABLE_NLPSOLVER)" "y"
+ CONFIGURE_FLAGS_INDEP += --enable-ext-nlpsolver
+ endif
+ OOO_OFFICEBEAN_DEP = libreoffice-officebean
+ BUILD_DEPS += , javahelper $(JAVAHELPER_MIN_VERSION)
+else
+ CONFIGURE_FLAGS += --without-java
+ DEBHELPER_OPTIONS += -Nlibreoffice-officebean -Nlibreoffice-java-common -Nlibreoffice-script-provider-bsh -Nlibreoffice-script-provider-js
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ ifeq "$(shell $(JAVA_HOME)/bin/java -version 2>&1 | grep -q Zero && echo true)" "true"
+ #RUN_MAKE_CHECK:=n
+ ENABLE_JUNIT4=n
+ endif
+endif
+
+ifneq (,$(filter nss, $(SYSTEM_STUFF)))
+ BUILD_DEPS+= , libnss3-dev (>= 3.12.3)
+ BUILD_DEPS+= , libnspr4-dev
+endif
+
+ifeq "$(USE_UCPP)" "y"
+ ifneq (,$(filter ucpp, $(SYSTEM_STUFF)))
+ IDLC_CPP_DEPENDS := ucpp
+ endif
+else
+# hardcode 4.7 as 4.8 fails:
+# 14:17 <@caolan> ah, "build fails with cpp 4.8.0, this is fixable by passing
+# -P, but then idlc produces empty urd files"
+ IDLC_CPP_DEPENDS := cpp-4.7
+ CONFIGURE_FLAGS += --with-idlc-cpp=cpp-4.7
+endif
+ BUILD_DEPS += , $(IDLC_CPP_DEPENDS)
+
+ifneq (,$(filter hunspell, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libhunspell-dev $(HUNSPELL_MIN_VER)
+endif
+ CONFIGURE_FLAGS += --with-external-dict-dir=$(DICT_DIR)
+
+ifneq (,$(filter altlinuxhyph, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libhyphen-dev $(LIBHYPHEN_MINVER)
+endif
+ CONFIGURE_FLAGS += --with-external-hyph-dir=$(HYPH_DIR)
+
+ifneq (,$(filter boost, $(SYSTEM_STUFF)))
+ ifneq "$(BOOST_VERSION)" "default"
+ BUILD_DEPS += , libboost$(BOOST_VERSION)-dev $(BOOST_MINVER), libboost-date-time$(BOOST_VERSION)-dev $(BOOST_MINVER), libboost-iostreams$(BOOST_VERSION)-dev, libboost-filesystem$(BOOST_VERSION)-dev, libboost-locale$(BOOST_VERSION)-dev
+ #BUILD_DEPS += , libboost-thread$(BOOST_VERSION)-dev, libboost-program-options$(BOOST_VERSION)-dev
+ ifeq (,$(filter orcus, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libboost-system$(BOOST_VERSION)-dev $(BOOST_MINVER), libboost-iostreams$(BOOST_VERSION)-dev $(BOOST_MINVER), libboost-program-options$(BOOST_VERSION)-dev $(BOOST_MINVER), libboost-filesystem$(BOOST_VERSION)-dev $(BOOST_MINVER)
+ endif
+ ifeq ($(USE_VLC),y)
+ BUILD_DEPS += , libboost-system$(BOOST_VERSION)-dev $(BOOST_MINVER)
+ endif
+ else
+ BUILD_DEPS += , libboost-dev $(BOOST_MINVER), libboost-date-time-dev $(BOOST_MINVER), libboost-iostreams-dev $(BOOST_MINVER), libboost-filesystem-dev $(BOOST_MINVER), libboost-locale-dev $(BOOST_MINVER)
+ #BUILD_DEPS += , libboost-thread-dev, libboost-program-options-dev
+ ifeq (,$(filter orcus, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libboost-system-dev $(BOOST_MINVER), libboost-iostreams-dev $(BOOST_MINVER), libboost-program-options-dev $(BOOST_MINVER), libboost-filesystem-dev $(BOOST_MINVER)
+ endif
+ ifeq ($(USE_VLC),y)
+ BUILD_DEPS += , libboost-system-dev $(BOOST_MINVER)
+ endif
+ endif
+ ifeq "$(shell if [ -e /usr/lib/$(DEB_HOST_MULTIARCH)/libboost_date_time.so ]; then echo true; fi)" "true"
+ CONFIGURE_FLAGS += --with-boost-libdir=/usr/lib/$(DEB_HOST_MULTIARCH)
+ endif
+endif
+
+ifneq (,$(filter mdds, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libmdds-dev (>= 1.4.1)
+endif
+
+ifneq (,$(filter orcus, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , liborcus-dev (>= $(LIBORCUS_MINVER))
+endif
+
+ifneq (,$(filter clucene, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libclucene-dev (>= $(CLUCENE_MINVER))
+endif
+
+ifeq "$(USE_EXTERNAL_CXXLIBS)" "y"
+ ifneq (,$(filter librevenge, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , librevenge-dev
+ endif
+ ifneq (,$(filter libwpd, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libwpd-dev (>= 0.10)
+ endif
+ ifneq (,$(filter mythes, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libmythes-dev (>= 2:1.2)
+ endif
+ ifneq (,$(filter libwps, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libwps-dev (>= 0.4)
+ BUILD_DEPS += , libwps-dev (>= 0.4.9) <!nocheck>
+ endif
+ ifneq (,$(filter libwpg, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libwpg-dev (>= 0.3)
+ endif
+ ifneq (,$(filter libvisio, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libvisio-dev (>= 0.1)
+ endif
+ ifneq (,$(filter libcdr, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libcdr-dev (>= 0.1)
+ endif
+ ifneq (,$(filter libmspub, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libmspub-dev (>= 0.1)
+ endif
+ ifneq (,$(filter libmwaw, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libmwaw-dev (>= 0.3.1)
+ BUILD_DEPS += , libmwaw-dev (>= 0.3.13) <!nocheck>
+ endif
+ ifneq (,$(filter libodfgen, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libodfgen-dev (>= 0.1)
+ endif
+ ifneq (,$(filter libepubgen, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libepubgen-dev (>= 0.1.0)
+ endif
+ ifneq (,$(filter libetonyek, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libetonyek-dev
+ BUILD_DEPS += , libetonyek-dev (>= 0.1.8) <!nocheck>
+ endif
+ ifneq (,$(filter libfreehand, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libfreehand-dev (>= 0.1)
+ endif
+ ifneq (,$(filter libabw, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libabw-dev (>= 0.1)
+ endif
+ ifneq (,$(filter libpagemaker, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libpagemaker-dev
+ endif
+ ifneq (,$(filter libzmf, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libzmf-dev
+ endif
+ ifneq (,$(filter libstaroffice, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libstaroffice-dev
+ BUILD_DEPS += , libstaroffice-dev (>= 0.0.3) <!nocheck>
+ endif
+ ifneq (,$(filter libqxp, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libqxp-dev
+ endif
+ ifneq (,$(filter libebook, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libe-book-dev
+ BUILD_DEPS += , libe-book-dev (>= 0.1.2) <!nocheck>
+ endif
+ ifneq (,$(filter libcmis, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libcmis-dev (>= $(LIBCMIS_MINVER))
+ endif
+endif
+ CONFIGURE_FLAGS += --with-external-thes-dir=$(THES_DIR)
+
+ifeq "$(INSTALL_APPARMOR_PROFILES)" "y"
+ BUILD_DEPS += , dh-apparmor
+ ifeq "$(CHECK_APPARMOR_PROFILES)" "true"
+ BUILD_DEPS += , apparmor <!nocheck>
+ endif
+endif
+
+ifeq "$(ENABLE_EOT)" "y"
+ CONFIGURE_FLAGS += --enable-eot
+ ifneq (,$(filter libeot, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libeot-dev
+ endif
+endif
+
+ifneq (,$(filter lcms2, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , liblcms2-dev
+endif
+
+ifneq (,$(filter openldap, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libldap2-dev
+endif
+
+ifneq (,$(filter liblangtag, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , liblangtag-dev (>= 0.4)
+endif
+
+ifneq (,$(filter icu, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libicu-dev $(ICU_MINVER)
+endif
+
+
+ifeq "$(BUILD_CAIROCANVAS)" "y"
+ ifneq (,$(filter cairo, $(SYSTEM_STUFF)))
+ BUILD_DEPS+= , libcairo2-dev
+ endif
+else
+ CONFIGURE_FLAGS+= --disable-cairo
+endif
+
+ifeq "$(BUILD_KDE4)" "n"
+ CONFIGURE_FLAGS += --disable-kde4
+else
+ CONFIGURE_FLAGS += --enable-kde4
+ KDE_ICONSET_DEP=libreoffice-style-breeze
+ BUILD_DEPS += , kdelibs5-dev $(KDELIBS_MINVER)
+ BUILD_DEPS += , libqt4-dev $(QT4_MINVER)
+endif
+
+ifeq "$(BUILD_KDE5)" "y"
+ KDE_ICONSET_DEP=libreoffice-style-breeze
+ ifeq "$(ENABLE_GTK3_KDE5)" "y"
+ CONFIGURE_FLAGS += --enable-gtk3-kde5
+ # set them here as we don't build the Qt5 plugin. If it is built
+ # it is set below
+ BUILD_DEPS += , qtbase5-dev $(QT5_MINVER), qt5-qmake $(QT5_MINVER), qtbase5-dev-tools $(QT5_MINVER)
+ BUILD_DEPS += , libglib2.0-dev (>= 2.4)
+ # for correct qmake/moc
+ BUILD_DEPS += , qtchooser
+ export QT_SELECT=5
+ endif
+ ifeq "$(ENABLE_KDE5)" "y"
+ CONFIGURE_FLAGS += --enable-kde5
+ endif
+ BUILD_DEPS += , libqt5x11extras5-dev $(QT5_MINVER)
+ BUILD_DEPS += , libkf5coreaddons-dev, libkf5i18n-dev, libkf5config-dev, libkf5windowsystem-dev, libkf5kio-dev
+ BUILD_DEPS += , libxcb1-dev
+endif
+
+ifeq "$(ENABLE_QT5)" "y"
+ CONFIGURE_FLAGS += --enable-qt5
+ BUILD_DEPS += , qtbase5-dev $(QT5_MINVER), qt5-qmake $(QT5_MINVER), qtbase5-dev-tools $(QT5_MINVER)
+ BUILD_DEPS += , libglib2.0-dev (>= 2.4)
+ # for correct qmake/moc
+ BUILD_DEPS += , qtchooser
+ export QT_SELECT=5
+endif
+
+ifeq "$(ENABLE_MYSQLNATIVE)" "y"
+ CONFIGURE_FLAGS += --enable-ext-mariadb-connector
+ ifeq "$(MYSQL_FLAVOUR)" "default"
+ ifneq (,$(filter mariadb, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , default-libmysqlclient-dev
+ endif
+ else
+ ifeq "$(MYSQL_FLAVOUR)" "mysql"
+ ifneq (,$(filter mysql-cppconn, $(SYSTEM_STUFF)))
+ ifneq (,$(filter mariadb, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libmysqlclient-dev
+ endif
+ endif
+ MARIADBCONFIG=/usr/bin/mysql_config
+ endif
+ ifeq "$(MYSQL_FLAVOUR)" "mariadb"
+ ifneq (,$(filter mariadb, $(SYSTEM_STUFF)))
+ # deducted from default-libmysqlclient-dev Depends
+ BUILD_DEPS += , libmariadbclient-dev-compat
+ endif
+ MARIADBCONFIG=/usr/bin/mariadb_config
+ endif
+ endif
+ ifneq (,$(filter mysql-cppconn, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libmysqlcppconn-dev $(MYSQLCPPCONN_MINVER)
+ endif
+endif
+
+ifeq "$(ENABLE_FIREBIRD)" "y"
+ BASE_FIREBIRD_RECOMMENDS = libreoffice-sdbc-firebird [$(OOO_FIREBIRD_ARCHS)]
+ ifneq (,$(filter libatomic-ops, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libatomic-ops-dev (>= 7.3~alpha1+git20110913-1)$(OOO_NO_FIREBIRD_ARCHS)
+ endif
+ ifneq (,$(filter libtommath, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libtommath-dev$(OOO_NO_FIREBIRD_ARCHS)
+ endif
+ ifneq (,$(filter firebird, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , firebird-dev (>= 3.0.0.32483.ds4-4)$(OOO_NO_FIREBIRD_ARCHS)
+ # we need libEngine12.so
+ BUILD_DEPS += , firebird3.0-server-core $(OOO_NO_FIREBIRD_ARCHS) <!nocheck>
+ FIREBIRD_ENGINE_DEPENDS += firebird3.0-server-core
+ endif
+else
+ CONFIGURE_FLAGS += --disable-firebird-sdbc
+ DEBHELPER_OPTIONS += -Nlibreoffice-sdbc-firebird
+endif
+
+ifeq "$(BUILD_GTK)" "n"
+ CONFIGURE_FLAGS+= --disable-gtk
+ DEBHELPER_OPTIONS+= -Nlibreoffice-gtk2 -Nlibreoffice-gnome
+else
+ BUILD_DEPS += , libgtk2.0-dev (>= 2.18.0)
+endif
+ifeq "$(BUILD_GTK3)" "y"
+ BUILD_DEPS += , libgtk-3-dev (>= 3.18.0), libglib2.0-dev (>= 2.38.0)
+ ifneq (cairo,$(findstring cairo,$(SYSTEM_STUFF)))
+ $(error GTK3 build fails without system-cairo!!)
+ endif
+ ifeq (,$(filter epoxy, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libegl1-mesa-dev
+ endif
+ GNOME_GTK_RECOMMENDS += libreoffice-gtk3
+ ifeq "$(ENABLE_INTROSPECTION)" "y"
+ BUILD_DEPS += , gobject-introspection (>= 1.32.0), libgirepository1.0-dev (>= 1.32)
+ else
+ CONFIGURE_FLAGS += --enable-introspection=no
+ DEBHELPER_OPTIONS+= -Ngir1.2-lokdocview-0.1
+ endif
+else
+ CONFIGURE_FLAGS+= --disable-gtk3
+ GNOME_GTK_DEPENDS += libreoffice-gtk2
+endif
+
+ifeq "$(ENABLE_EVO2)" "n"
+ CONFIGURE_FLAGS += --disable-evolution2
+ DEBHELPER_OPTIONS += -Nlibreoffice-evolution
+else
+ CONFIGURE_FLAGS += --enable-evolution2
+ BUILD_DEPS += , libebook1.2-dev
+ LIBEBOOK_DEP = $(shell debian/scripts/get_libebook_dep.sh)
+endif
+
+ifeq "$(ENABLE_SDBC_POSTGRESQL)" "y"
+ ifneq (,$(filter postgresql, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libpq-dev (>= 9.0~)
+ else
+ BUILD_DEPS += , libkrb5-dev
+ endif
+else
+ CONFIGURE_FLAGS += --disable-postgresql-sdbc
+ DEBHELPER_OPTIONS += -Nlibreoffice-sdbc-postgresql
+endif
+
+ifeq "$(ENABLE_RANDR)" "y"
+ BUILD_DEPS += , libxrandr-dev
+else
+ CONFIGURE_FLAGS += --disable-randr
+endif
+
+ifneq "$(ENABLE_PYTHON)" "y"
+ DEBHELPER_OPTIONS+= -Npython3-uno -Nlibreoffice-script-provider-python
+ CONFIGURE_FLAGS += --disable-python
+else
+ PYUNO_DEPENDS = python3-uno (>= 4.4.0~beta2)
+ CONFIGURE_FLAGS += --enable-python=system
+endif
+
+ifneq "$(PACKAGE_LIBRELOGO)" "y"
+ DEBHELPER_OPTIONS+= -Nlibreoffice-librelogo
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ ifneq (,$(filter hsqldb, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libhsqldb1.8.0-java $(HSQLDB_MINVER)$(OOO_NO_JAVA_ARCHS), libarchive-zip-perl$(OOO_NO_JAVA_ARCHS)
+ BASE_HSQLDB_DEPENDS = libhsqldb1.8.0-java $(HSQLDB_MINVER)
+ CONFIGURE_FLAGS += --with-hsqldb-jar=$(HSQLDB_JAR)
+ else
+ BUILD_DEPS += , libservlet3.1-java
+ endif
+ ifeq "$(ENABLE_SCRIPT_PROVIDER_BSH)" "y"
+ ifneq (,$(filter beanshell, $(SYSTEM_STUFF)))
+ BUILD_DEPS_INDEP += , libbsh-java
+ endif
+ CONFIGURE_FLAGS += --enable-scripting-beanshell
+ else
+ CONFIGURE_FLAGS += --disble-scripting-beanshell
+ DEBHELPER_OPTIONS += -Nlibreoffice-script-provider-bsh
+ endif
+ ifeq "$(ENABLE_SCRIPT_PROVIDER_JS)" "y"
+ CONFIGURE_FLAGS += --enable-scripting-javascript
+ else
+ CONFIGURE_FLAGS += --disable-scripting-javascript
+ DEBHELPER_OPTIONS += -Nlibreoffice-script-provider-js
+ endif
+endif
+
+ifneq (,$(filter lpsolve, $(SYSTEM_STUFF)))
+ ifeq "$(USE_SHARED_LPSOLVE)" "y"
+ BUILD_DEPS += , liblpsolve55-dev $(LPSOLVE_MIN_VERSION), lp-solve $(LPSOLVE_MIN_VERSION)
+ LPSOLVE_DEP = lp-solve $(LPSOLVE_MIN_VERSION)
+ else
+ BUILD_DEPS += , liblpsolve55-dev $(LPSOLVE_MIN_VERSION)
+ endif
+ ifeq "$(USE_LIBSUITESPARSE)" "y"
+ BUILD_DEPS += , libsuitesparse-dev $(SUITESPARSE_MIN_VERSION)
+ else
+ BUILD_DEPS += , libufsparse-dev
+ endif
+endif
+
+ifeq "$(USE_DBUS)" "y"
+ BUILD_DEPS += , libdbus-glib-1-dev (>= 0.70)
+ CONFIGURE_FLAGS += --enable-dbus
+ ifeq "$(ENABLE_BLUETOOTH)" "y"
+ ifneq (,$(filter bluez, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libbluetooth-dev [linux-any]
+ endif
+ else
+ CONFIGURE_FLAGS += --disable-sdremote-bluetooth
+ endif
+ ifeq "$(ENABLE_PACKAGEKIT)" "y"
+ CONFIGURE_FLAGS += --enable-packagekit
+ endif
+endif
+
+ifeq "$(ENABLE_AVAHI)" "y"
+ BUILD_DEPS += , libavahi-client-dev
+ CONFIGURE_FLAGS += --enable-avahi
+endif
+
+ifeq "$(USE_GSTREAMER)" "y"
+ BUILD_DEPS += , libgstreamer1.0-dev
+ CONFIGURE_FLAGS += --enable-gstreamer-1-0
+ BUILD_DEPS += , libgstreamer-plugins-base1.0-dev
+ GSTREAMER_PLUGINS_SUGGESTS += , gstreamer1.0-plugins-base, gstreamer1.0-plugins-good, gstreamer1.0-plugins-ugly, gstreamer1.0-plugins-bad, gstreamer1.0-libav
+ AVMEDIA_BE_DEPENDS += , libreoffice-avmedia-backend-gstreamer
+else
+ CONFIGURE_FLAGS += --disable-gstreamer-1-0
+ DEBHELPER_OPTIONS += -Nlibreoffice-avmedia-backend-gstreamer
+endif
+
+ifeq "$(USE_VLC)" "y"
+ CONFIGURE_FLAGS += --enable-vlc
+ LIBVLC_DEP = $(shell debian/scripts/get_libvlc_dep.sh) (>= 2.0.8)
+ BUILD_DEPS += , $(LIBVLC_DEP)
+ ifeq "$(AVMEDIA_BE_DEPENDS)" ""
+ AVMEDIA_BE_DEPENDS += , libreoffice-avmedia-backend-vlc
+ else
+ AVMEDIA_BE_DEPENDS += | libreoffice-avmedia-backend-vlc
+ endif
+else
+ DEBHELPER_OPTIONS += -Nlibreoffice-avmedia-backend-vlc
+endif
+
+ifeq "$(ENABLE_WEBDAV)" "y"
+ ifeq "$(WEBDAV_LIB)" "neon"
+ ifneq (,$(filter neon, $(SYSTEM_STUFF)))
+ ifneq "$(NEON_SECTYPE)" "openssl"
+ BUILD_DEPS += , libneon$(NEONSONR)-$(NEON_SECTYPE)-dev
+ else
+ BUILD_DEPS += , libneon$(NEONSONR)-dev
+ endif
+ endif
+ else
+ ifneq (,$(filter apr, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libaprutil1-dev
+ endif
+ ifneq (,$(filter serf, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libserf-dev
+ endif
+ endif
+ CONFIGURE_FLAGS += --with-webdav=$(WEBDAV_LIB)
+else
+ CONFIGURE_FLAGS += --with-webdav=no
+endif
+
+ifeq "$(ENABLE_HELP)" "n"
+ CONFIGURE_FLAGS += --without-helppack-integration --without-help
+endif
+
+ifneq (,$(filter redland, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , librdf0-dev (>= 1.0.16-2)
+ SHLIBS_OVERRIDE += -Xunordf
+endif
+
+ifneq (,$(filter epoxy, $(SYSTEM_STUFF)))
+ BUILD_DEPS += , libepoxy-dev (>= 1.2)
+else
+ BUILD_DEPS += , libegl1-mesa-dev
+endif
+ifneq (,$(filter glm, $(SYSTEM_STUFF)))
+ ifeq "$(shell dpkg --compare-versions $(SYSTEM_GCC_VERSION) ge 7.3 && echo true)" "true"
+ BUILD_DEPS += , libglm-dev (>= 0.9.9~a2)
+ else
+ BUILD_DEPS += , libglm-dev (>= 0.9.6.3)
+ endif
+endif
+
+ifneq (,$(filter gpgmepp, $(SYSTEM_STUFF)))
+ BUILD_DEPS+= , libgpgmepp-dev, libgpgme-dev, libgpg-error-dev
+endif
+ifeq "$(STRETCH_BACKPORT)" "y"
+ BUILD_DEPS+= , gnupg <!nocheck>
+ BUILD_DEPS+= , gnupg-agent <!nocheck>
+else
+ BUILD_DEPS+= , gpg <!nocheck>
+ BUILD_DEPS+= , gpgconf <!nocheck>
+ BUILD_DEPS+= , gpg-agent <!nocheck>
+endif
+
+ifeq "$(ENABLE_GIO)" "y"
+ ifneq "$(BUILD_GTK3)" "y"
+ BUILD_DEPS += , libglib2.0-dev (>= 2.26.0)
+ endif
+else
+ CONFIGURE_FLAGS += --disable-gio
+endif
+
+ifeq "$(ENABLE_DCONF)" "y"
+ BUILD_DEPS += , libdconf-dev (>= 0.15.2)
+else
+ CONFIGURE_FLAGS += --disable-dconf
+endif
+
+ifeq ($(ENABLE_MERGELIBS),y)
+ CONFIGURE_FLAGS += --enable-mergelibs
+endif
+
+ifeq ($(ENABLE_LTO),y)
+ CONFIGURE_FLAGS += --enable-lto
+endif
+
+ifeq ($(USE_GOLD),y)
+ DEB_LDFLAGS_MAINT_APPEND += -fuse-ld=gold
+export DEB_LDFLAGS_MAINT_APPEND
+endif
+
+# Use compiler cache? Include ccache in DEB_BUILD_OPTIONS for much faster rebuild times
+# A complete build uses about 9G of compiler cache.
+ifneq (ccache,$(findstring ccache,$(DEB_BUILD_OPTIONS)))
+ CONFIGURE_FLAGS += --disable-ccache
+endif
+
+## Build n projects in parallel?
+## DEB_BUILD_OPTIONS=parallel=<n>
+## if not specified LibreOffices configure tries to find it out itself
+NUM_CPUS=$(shell echo "$(DEB_BUILD_OPTIONS) " | sed -n 's/^\(.* \)\?parallel=\([0-9]\+\).*$$/\2/p')
+AVAIL_CPUS := $(shell getconf _NPROCESSORS_ONLN 2>/dev/null || echo 1)
+ifeq "$(PARALLEL_BUILD)" "y"
+ # we need to specify it only if it differs, otherwise configure autodetects
+ # it.
+ ifneq "$(NUM_CPUS)" "$(AVAIL_CPUS)"
+ CONFIGURE_FLAGS += --with-parallelism=$(NUM_CPUS)
+ endif
+else
+ CONFIGURE_FLAGS += --without-parallelism
+endif
+
+ifeq ($(GCC_VERSION),snapshot)
+ BUILD_PATH = /usr/lib/gcc-snapshot/bin:$$PATH
+ BUILD_LD_LIBRARY_PATH = /usr/lib/gcc-snapshot/lib:$$LD_LIBRARY_PATH
+ BUILD_DEPS += , gcc-snapshot
+else
+ BUILD_PATH = $(CURDIR)/debian/usr/bin:$$PATH
+endif
+BUILD_PATH := $(CURDIR)/debian/usr/bin:$(BUILD_PATH)
+
+ifneq "$(ENABLE_DEPENDENCY_TRACKING)" "y"
+CONFIGURE_FLAGS += --disable-dependency-tracking
+endif
+
+# Because of the stampdir magic, when you actually want to run a rule
+# over, you would have to remove the stamp manually. Now, just do
+# 'debian/rules <target> <target> ... FORCE=1', and the stamp files
+# that match the given targets will be removed automagically.
+stampdir_targets+=prepare
+stampdir_targets+=build build-arch build-indep maintscripts
+stampdir_targets+=install-common install-arch install-indep langpacks
+stampdir_targets+=binary-arch binary-indep
+ifdef FORCE
+ DUMMY:=$(shell rm -f $(patsubst %,$(STAMP_DIR)/%,$(filter $(stampdir_targets),$(MAKECMDGOALS))))
+endif
+
+# If this is defined, then none of the 'long' commands will be run. Useful
+# for testing.
+# test_rules=1
+
+# Since the final stages use up a large amount of diskspace, provide targets to
+# remove them without needing a full rebuild
+
+# Clean up the package directories (about 830M)
+clean-debdir:
+ dh_testdir
+ # remove generated symlinks / java wrappers
+ rm -rf debian/usr
+
+ find debian -name "*.links" ! -name "libreoffice-dev-doc.links" \
+ ! -name "libreoffice-java-common.links" \
+ ! -name "liblibreofficekitgtk.links" \
+ ! -name "libreoffice-help-common.links" -exec rm {} \;
+ if [ -d "$(STAMP_DIR)" ]; then rm -rf "$(STAMP_DIR)"; fi
+ rm -f debian/*.bug-script
+
+ rm -f debian/shlibs.local
+
+ rm -f debian/libreoffice-dev-doc.doc-base.* \
+ debian/libreoffice-help-*.doc-base
+ rm -f debian/libreoffice-help-*.lintian-overrides
+ rm -f debian/*.install debian/*.dirs debian/*.changelog
+ rm -f debian/*.postinst debian/*.postrm debian/*.preinst debian/*.prerm debian/*.triggers
+ rm -f debian/pom*.xml
+
+ rm -rf $(CURDIR)/debian/locales
+
+ifeq "$(ENABLE_JAVA)" "y"
+ mh_clean
+endif
+ dh_clean
+
+clean:
+ dh_testroot
+ dh_testdir
+
+ if [ -f config.status ]; then \
+ $(MAKE) distclean; \
+ rm -f config.status; \
+ fi
+ find $(SOURCE_TREE) -name "*.pyc" -exec rm {} \;
+ rm -rf */*.pro.obsolete
+
+ rm -rf $(SOURCE_TREE)/file-lists
+ rm -rf $(SOURCE_TREE)/pyuno-for*
+ rm -f autogen.lastrun
+ rm -f build_error.log
+ rm -f config/config_version.h
+
+ifeq "$(HELPISOS)" ""
+ rm -rf images*
+endif
+
+ rm -f download.list
+
+ rm -f extras/source/truetype/symbol/opens___.ttf
+
+ # obsolete lock file not cleaned up....
+ rm -f dbaccess/qa/extras/testdocuments/fdo84315.odb.lck
+
+ # Files created in debian directory
+ $(MAKE) -f debian/rules clean-debdir
+
+ $(MAKE) -f debian/rules control
+
+
+# Generate control file, because we have so many different languages
+# Based on script by Martin Quinson <Martin.Quinson@tuxfamily.org>
+control: debian/control
+debian/control: $(wildcard debian/control*in) $(SOURCE_TREE)/bin/lo-xlate-lang debian/rules
+ chmod 755 $(SOURCE_TREE)/bin/lo-xlate-lang
+ sed -e "s#%$(DEB_VENDOR)=\([^%]*\)%#, \1#g#" \
+ -e "s#%[A-Za-z]*=[^%]*%##g#" \
+ -e "s#%BUILD_DEPS_INDEP%#$(strip $(BUILD_DEPS_INDEP))#g" \
+ -e "s#@BUGS@#$(BUGS)#g" \
+ < debian/control.in > debian/control
+
+ for LNUM in $(filter-out en-US,$(LANGPACKISOS)) ; do \
+ LNAME=`$(SOURCE_TREE)/bin/lo-xlate-lang -l $$LNUM | perl -e 'print ucfirst(<STDIN>);'`; \
+ LCODE=`$(SOURCE_TREE)/bin/lo-xlate-lang -i $$LNUM | tr A-Z a-z`; \
+ [ "$$LNUM" = ca-valencia ] && continue; \
+ [ "$$LNUM" = sr-Latn ] && continue; \
+ [ "$$LCODE" = kmr-latn ] && LCODE=kmr; \
+ CCODE=`echo $$LCODE | sed 's/-.*//'`; \
+ case "$$LCODE" in \
+ bn) \
+ FONT_RECOMMENDS=", fonts-beng"; \
+ ;; \
+ gu) \
+ FONT_RECOMMENDS=", fonts-gujr"; \
+ ;; \
+ pa-in) \
+ FONT_RECOMMENDS=", fonts-guru"; \
+ ;; \
+ ml) \
+ FONT_RECOMMENDS=", fonts-mlym"; \
+ ;; \
+ or) \
+ FONT_RECOMMENDS=", fonts-orya"; \
+ ;; \
+ te) \
+ FONT_RECOMMENDS=", fonts-telu"; \
+ ;; \
+ ta) \
+ FONT_RECOMMENDS=", fonts-taml"; \
+ ;; \
+ hi-in|ne|mr) \
+ FONT_RECOMMENDS=", fonts-deva"; \
+ ;; \
+ he) \
+ FONT_RECOMMENDS=", culmus"; \
+ ;; \
+ km) \
+ FONT_RECOMMENDS=", fonts-khmeros"; \
+ ;; \
+ ar) \
+ FONT_RECOMMENDS=", fonts-kacst, fonts-hosny-amiri, fonts-sil-scheherazade, fonts-hosny-thabit"; \
+ ;; \
+ fa) \
+ FONT_RECOMMENDS=", fonts-farsiweb"; \
+ ;; \
+ dz) \
+ FONT_RECOMMENDS=", fonts-dzongkha"; \
+ ;; \
+ th) \
+ FONT_RECOMMENDS=", fonts-thai-tlwg"; \
+ ;; \
+ *) \
+ FONT_RECOMMENDS= ;; \
+ esac; \
+ case "$$LCODE" in \
+ rw) \
+ LOCALES_DEPENDS="locales (>= 2.3.6) | locales-all (>= 2.3.6)" \
+ ;; \
+ ss|ts|km|ns|tn) \
+ LOCALES_DEPENDS="locales (>= 2.3.5-12) | locales-all" \
+ ;; \
+ sr) \
+ LOCALES_DEPENDS="locales (>= 2.3.6.ds1-5) | locales-all" \
+ ;; \
+ as|or|nr) \
+ LOCALES_DEPENDS="locales (>= 2.3.6.ds1-1) | locales-all (>= 2.3.6.ds1-1)" \
+ ;; \
+ sw) \
+ LOCALES_DEPENDS="locales (>= 2.13-5) | locales-all (>= 2.13-5)" \
+ ;; \
+ *) \
+ LOCALES_DEPENDS="locales | locales-all" \
+ ;; \
+ esac; \
+ sed -e "s|@LNAME@|$$LNAME|g" -e "s|@LCODE@|$$LCODE|g" \
+ -e "s|@CCODE@|$$CCODE|g" \
+ -e "s|@FONT_RECOMMENDS@|$$FONT_RECOMMENDS|g" \
+ -e "s:@LOCALES_DEPENDS@:$$LOCALES_DEPENDS:g" \
+ -e "s|@LDAP_LIB@|$(LDAP_LIB)|g" \
+ >> debian/control < debian/control.lang.in; \
+ done
+
+ifneq "$(ENABLE_HELP)" "n"
+ for LNUM in $(HELPISOS) ; do \
+ LNAME=`$(SOURCE_TREE)/bin/lo-xlate-lang -l $$LNUM | perl -e 'print ucfirst(<STDIN>);'`; \
+ LCODE=`$(SOURCE_TREE)/bin/lo-xlate-lang -i $$LNUM | tr A-Z a-z`; \
+ [ "$$LNUM" = ca-valencia ] && continue; \
+ CCODE=`echo $$LCODE | sed 's/-.*//'`; \
+ sed -e "s|@LNAME@|$$LNAME|g" -e "s|@LCODE@|$$LCODE|g" \
+ -e "s|@CCODE@|$$CCODE|g" \
+ >> debian/control < debian/control.help.in; \
+ done
+ # en_US is in -common
+ perl -pi -e 's|(Depends: libreoffice-writer \| language-support-translations-en), libreoffice-l10n-en-us|\1|' \
+ debian/control
+ perl -pi -e 's|(Depends: libreoffice-writer, libreoffice-l10n-en-us)|\1, fonts-deva|' \
+ debian/control
+endif
+ cat debian/control.ure.in >> debian/control
+ifeq "$(ENABLE_JAVA)" "y"
+ ifeq "$(ENABLE_MEDIAWIKI)" "y"
+ cat debian/control.mediawiki.in >> debian/control
+ endif
+ ifeq "$(ENABLE_REPORTBUILDER)" "y"
+ cat debian/control.reportbuilder.in >> debian/control
+ endif
+ ifeq "$(ENABLE_NLPSOLVER)" "y"
+ cat debian/control.nlpsolver.in >> debian/control
+ endif
+endif
+ cat debian/control.fonts.in >> debian/control
+ifeq "$(PACKAGE_SDK)" "y"
+ cat debian/control.sdk.in >> debian/control
+endif
+ifeq "$(PACKAGE_LOKIT)" "y"
+ cat debian/control.lokit.in >> debian/control
+endif
+ifeq "$(BUILD_GTK)" "y"
+ cat debian/control.gtk2.in >> debian/control
+endif
+ifeq "$(BUILD_GTK3)" "y"
+ cat debian/control.gtk3.in >> debian/control
+endif
+ifeq "$(BUILD_KDE)" "y"
+ cat debian/control.kde$(KDE_MAJOR).in >> debian/control
+endif
+ifeq "$(ENABLE_QT5)" "y"
+ cat debian/control.qt5.in >> debian/control
+endif
+ cat debian/control.postgresql.in >> debian/control
+ifeq "$(ENABLE_MYSQLNATIVE)" "y"
+ cat debian/control.mysql.in >> debian/control
+endif
+ifeq "$(ENABLE_EVO2)" "y"
+ cat debian/control.evolution.in >> debian/control
+endif
+ cat debian/control.test-packages.in >> debian/control
+ifeq "$(PACKAGE_LIBRELOGO)" "y"
+ cat debian/control.librelogo.in >> debian/control
+endif
+ cat debian/control.firebird.in >> debian/control
+
+ cat debian/control.transitionals.in >> debian/control
+
+ perl -pi -e "s,%OOO_ARCHS%,$(OOO_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_64BIT_ARCHS%,$(OOO_64BIT_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_BE_ARCHS%,$(OOO_BE_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_LE_ARCHS%,$(OOO_LE_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_BASE_ARCHS%,$(OOO_BASE_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_NO_BASE_ARCHS%,$(OOO_NO_BASE_ARCHS),"g debian/control
+ perl -pi -e "s,%OOO_JAVA_ARCHS%,$(OOO_JAVA_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_ARCH_DEP_EXTENSIONS_ARCHS%,$(OOO_ARCH_DEP_EXTENSIONS_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_REPORTBUILDER_ARCHS%,$(OOO_REPORTBUILDER_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_NO_REPORTBUILDER_ARCHS%,$(OOO_NO_REPORTBUILDER_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_FIREBIRD_ARCHS%,$(OOO_FIREBIRD_ARCHS),g" debian/control
+ perl -pi -e "s,%OOO_NO_FIREBIRD_ARCHS%,$(OOO_NO_FIREBIRD_ARCHS),g" debian/control
+ perl -pi -e "s#%BUILD_DEPS%#$(strip $(BUILD_DEPS))#g" debian/control
+ perl -pi -e "s#%JUNIT_MIN_VER%#$(JUNIT_MIN_VER)#g" debian/control
+ifeq "$(BUILD_KDE)" "y"
+ perl -pi -e 's/%LO-DESKTOP-INTEGRATION%/libreoffice-gnome | libreoffice-kde$(KDE_MAJOR)/' debian/control
+else
+ perl -pi -e 's/%LO-DESKTOP-INTEGRATION%/libreoffice-gnome/' debian/control
+endif
+
+ifeq (sk,$(findstring sk,$(HELPISOS)))
+ perl -pi -e 's/(Depends:.*)libreoffice-l10n-sk(.*)$$/\1libreoffice-l10n-sk, libreoffice-help-cs\2/' debian/control
+endif
+ifeq (pt-BR,$(findstring pt-BR,$(LANGPACKISOS)))
+ perl -pi -e 's/libreoffice2-l10n-pt-br$$/libreoffice2-l10n-pt-br, broffice/' debian/control
+ perl -pi -e 's/libreoffice2-l10n-pt-br$$/libreoffice2-l10n-pt-br, broffice/' debian/control
+ perl -pi -e 's/libreoffice2-l10n-pt-br$$/libreoffice2-l10n-pt-br, broffice/' debian/control
+endif
+
+ifeq "$(MYSQL_FLAVOUR)" "mysql"
+ perl -pi -e "s/(Build-Conflicts: .*)/\1,libmariadbclient-dev,/" debian/control
+endif
+ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ perl -pi -e "s/(Build-Conflicts: .*)/\1,fonts-liberation2 (= 2.00.1-4) <!nocheck>,/" debian/control
+ perl -pi -e "s/(Build-Conflicts: .*)/\1,fonts-liberation2 (= 2.00.1-5) <!nocheck>,/" debian/control
+ # be safe.
+ perl -pi -e "s/(Build-Conflicts: .*)/\1,fonts-liberation (= 1:1.07.4-3) <!nocheck>,/" debian/control
+ perl -pi -e "s/(Build-Conflicts: .*)/\1,fonts-liberation (= 1:1.07.4-4) <!nocheck>,/" debian/control
+ perl -pi -e "s/(Build-Conflicts: .*)/\1,fonts-liberation (= 1:1.07.4-5) <!nocheck>,/" debian/control
+ # be sure to use our rebuilt font
+ perl -pi -e "s/(Build-Conflicts: .*)/\1,fonts-opensymbol <!nocheck>,/" debian/control
+endif
+
+ifeq "$(STRETCH_BACKPORTS)" "y"
+ perl -pi -e 's/fonts-noto-mono/fonts-noto-hinted, fonts-noto-mono/' debian/control
+else
+ perl -pi -e 's/fonts-noto-mono/fonts-noto-core, fonts-noto-ui-core, fonts-noto-mono/' debian/control
+endif
+
+ $(PYTHON) debian/scripts/joinctrl.py < debian/control > debian/control.tmp
+ mv debian/control.tmp debian/control
+
+ # make -l10n-fi suggest libreoffice-spellcheck-fi to
+ # match myspell-fi and libreoffice-soikko/-voikko
+ perl -pi -e 's/myspell-dictionary-fi/myspell-dictionary-fi | libreoffice-spellcheck-fi/' debian/control
+ perl -pi -e 's/hyphen-fi/hyphen-fi | libreoffice-hyphenation-fi/' debian/control
+
+ifeq "$(USE_DBUS)" "y"
+ ifeq "$(ENABLE_BLUETOOTH)" "y"
+ perl -pi -e 's/paperconf$$/paperconf\n * bluez: Bluetooth support for Impress (slideshow remote control)/' debian/control
+ endif
+ perl -pi -e 's/Description: office productivity suite -- presentation/Suggests: bluez\nDescription: office productivity suite -- presentation/' debian/control
+endif
+
+ifneq "$(DICT_DIR)" "/usr/share/hunspell"
+ perl -pi -e 's/^Breaks:.*myspell.*\n//' debian/control
+endif
+
+ifeq "$(ENABLE_APPARMOR_PROFILES)" "y"
+ perl -pi -e 's/ttf-mscorefonts-installer/ttf-mscorefonts-installer, apparmor (>= 2.13.1~)/' debian/control
+ perl -pi -e 's/openoffice-unbundled/openoffice-unbundled, apparmor (<< 2.13.1~)/' debian/control
+
+endif
+
+.DELETE_ON_ERROR: debian/control
+
+# All 'important' targets have 2 lines. The one that is run by
+# dpkg-buildpackage or the user, and the one that does the actual work. This
+# indirection is needed so that the 'stamp' files that signify when a rule is
+# done can be located in a separate 'stampdir'. Recall that make has no way to
+# know when a goal has been met for a phony target (like "build" or "install").
+#
+# At the end of each stampdir target, be sure to run the command 'touch $@'
+# so that the target will not be run again. Removing the file will make
+# make run the target over.
+
+prepare: $(STAMP_DIR)/prepare
+$(STAMP_DIR)/prepare:
+ dh_testdir
+
+ # Make sure needed scripts are executable
+ set -e;\
+ for FILE in debian/scripts/move-if-change \
+ debian/scripts/get_libebook_dep.sh \
+ debian/scripts/get_libvlc_dep.sh \
+ debian/scripts/locale-gen \
+ autogen.sh; \
+ do \
+ chmod 755 $$FILE ;\
+ done
+
+ mkdir -p $(STAMP_DIR)
+
+ # Make sure we have /proc mounted - otherwise idlc will fail later.
+ test -r /proc/version
+
+ # create fake file if file not there; we don't use it anyways.
+ if [ ! -f $(TARFILE_LOCATION)/185d60944ea767075d27247c3162b3bc-unowinreg.dll ]; then \
+ touch $(TARFILE_LOCATION)/185d60944ea767075d27247c3162b3bc-unowinreg.dll; \
+ fi
+
+ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ifeq (terse,$(findstring terse,$(DEB_BUILD_OPTIONS)))
+ if [ -d .pc/do-not-hide-test-output.diff ]; then \
+ patch -p1 -R < debian/patches/do-not-hide-test-output.diff; \
+ TMP=`mktemp -q`; grep -v do-not-hide-test-output .pc/applied-patches \
+ > $$TMP && mv $$TMP .pc/applied-patches; \
+ rm -rf .pc/do-not-hide-test-output.diff; \
+ fi
+endif
+endif
+
+ touch $@
+
+.PHONY: config_host.mk
+config_host.mk:
+ rm -f config.status autogen.lastrun
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) \
+ CLANGDIR=$(CLANGDIR) \
+ MARIADBCONFIG=$(MARIADBCONFIG) \
+ FIREBIRD_CFLAGS=$(FIREBIRD_CFLAGS) FIREBIRD_LIBS=$(FIREBIRD_LIBS) \
+ ./autogen.sh $(CONFIGURE_FLAGS)
+
+build:
+ $(CURDIR)/debian/rules build-arch
+ $(CURDIR)/debian/rules build-indep
+ touch $(STAMP_DIR)/$@
+
+build-arch: $(STAMP_DIR)/prepare $(STAMP_DIR)/build-arch
+$(STAMP_DIR)/build-arch:
+#build-arch: ENABLE_HELP = n PACKAGE_SDK_DOCS = n ENABLE_MEDIAWIKI = n ENABLE_SCRIPT_PROVIDER_BSH = n ENABLE_SCRIPT_PROVIDER_JS = n
+ dh_testdir
+
+ # Theoretically this should call ./configure instead of
+ # it exists but that causes the configure flags NOT to be hnoured
+ # somehow...
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) \
+ CLANGDIR=$(CLANGDIR) \
+ MARIADBCONFIG=$(MARIADBCONFIG) \
+ FIREBIRD_CFLAGS=$(FIREBIRD_CFLAGS) FIREBIRD_LIBS=$(FIREBIRD_LIBS) \
+ ./autogen.sh $(CONFIGURE_FLAGS) \
+ --without-junit --without-cppunit \
+ --disable-ext-wiki-publisher \
+ --disable-scripting-javascript --disable-scripting-beanshell \
+ --without-doxygen --without-javadoc \
+ --with-galleries=no --with-theme="$(DEFAULT_IMAGE)"
+
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) ARCH_FLAGS=$(ARCH_FLAGS) TMP=`mktemp -q -d` $(MAKE) build-non-l10n-only
+
+ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ $(CURDIR)/debian/rules check
+endif
+
+ifneq "$(BUILD_ISOS)" "en-US"
+ # build sysui and some extensions again with all languages; as it contains language-specific help
+ # and/or descriptions...
+ $(MAKE) sysui.clean
+ $(MAKE) mysqlc.clean
+ make cmd cmd="cd sysui; export WITH_LANG='$(LANGPACKISOS)'; export WITH_LANG_LIST='$(LANGPACKISOS)'; $(MAKE)"
+ make cmd cmd="cd mysqlc; export WITH_LANG='$(LANGPACKISOS)'; export WITH_LANG_LIST='$(LANGPACKISOS)'; $(MAKE)"
+endif
+
+ touch $@
+
+build-indep: $(STAMP_DIR)/prepare $(STAMP_DIR)/build-indep
+$(STAMP_DIR)/build-indep:
+ dh_testdir
+
+ifeq "$(PACKAGE_SDK)" "y"
+ if [ -f Makefile ]; then $(MAKE) odk.clean; fi
+endif
+ if [ -f Makefile ]; then $(MAKE) scp2.clean; fi
+
+ rm -f config.status autogen.lastrun
+
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) \
+ MARIADBCONFIG=$(MARIADBCONFIG) \
+ FIREBIRD_CFLAGS=$(FIREBIRD_CFLAGS) FIREBIRD_LIBS=$(FIREBIRD_LIBS) \
+ ./autogen.sh $(CONFIGURE_FLAGS) $(CONFIGURE_FLAGS_INDEP)
+
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) ARCH_FLAGS=$(ARCH_FLAGS) TMP=`mktemp -q -d` $(MAKE) build-nocheck
+ifeq "$(BUILD_TEST_PACKAGES)" "y"
+ ifeq "$(ENABLE_JUNIT4)" "y"
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) ARCH_FLAGS=$(ARCH_FLAGS) TMP=`mktemp -q -d` $(MAKE) Jar_{OOoRunner,test,ConnectivityTools}
+ endif
+endif
+
+ifeq "$(BUILD_TEST_PACKAGES)" "y"
+ find workdir/Zip -name "smoketestdoc*" | xargs rm
+ patch -p0 < $(CURDIR)/debian/tests/patches/smoketest-disable-extension-tests.diff
+ cd smoketest && $(MAKE) Zip_smoketestdoc
+ patch -p0 -R < $(CURDIR)/debian/tests/patches/smoketest-disable-extension-tests.diff
+ cp workdir/Zip/smoketestdoc.zip workdir/Zip/smoketestdoc.sxw
+endif
+
+ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ $(CURDIR)/debian/rules check-indep
+endif
+
+ touch $@
+
+
+check:
+ifeq "$(RUN_MAKE_CHECK)" "y"
+ifneq (,$(findstring $(DEB_HOST_ARCH),$(OOO_NO_BASE_ARCHS)))
+ patch -p1 < $(CURDIR)/debian/tests/patches/disable-db-tests.diff
+endif
+ifeq (,$(findstring $(DEB_HOST_ARCH),$(OOO_EXTENSIONS_ARCHS)))
+ cd $(SOURCE_TREE)/smoketest && \
+ patch -p1 < $(CURDIR)/debian/tests/patches/smoketest-disable-extension-tests.diff
+endif
+
+ PATH=$(BUILD_PATH) LD_LIBRARY_PATH=$(BUILD_LD_LIBRARY_PATH) \
+ CLANGDIR=$(CLANGDIR) \
+ MARIADBCONFIG=$(MARIADBCONFIG) \
+ FIREBIRD_CFLAGS=$(FIREBIRD_CFLAGS) FIREBIRD_LIBS=$(FIREBIRD_LIBS) \
+ ./autogen.sh $(CONFIGURE_FLAGS) \
+ --disable-ext-wiki-publisher \
+ --disable-scripting-javascript --disable-scripting-beanshell \
+ --without-doxygen --without-javadoc \
+ --with-galleries=no --with-theme="$(DEFAULT_IMAGE)"
+
+ # generate the needed en_US.UTF-8 locale
+ mkdir -p $(CURDIR)/debian/locales
+ USE_CPUS=$(NUM_CPUS) debian/scripts/locale-gen
+
+ # build the tests first
+ export gb_SUPPRESS_TESTS=true; \
+ $(MAKE) check
+
+ # and now run them
+ $(IGNORE_MAKE_CHECK_FAILURES)t=`mktemp -q -d`; \
+ cd $(SOURCE_TREE) && \
+ export PATH=$(BUILD_PATH); \
+ export TMPDIR=$$t; \
+ export HOME=$$t; \
+ export LOCPATH=$(CURDIR)/debian/locales; \
+ export LANG=en_US.UTF-8; \
+ export LC_ALL=en_US.UTF-8; \
+ unset DISPLAY; \
+ if [ -x /usr/bin/gdb ]; then ulimit -c unlimited; fi && \
+ $(MAKE) -k check || PARALLELISM=1 $(MAKE) check && \
+ rm -rf $$t
+ifneq (,$(findstring $(DEB_HOST_ARCH),$(OOO_NO_BASE_ARCHS)))
+ patch -p1 -R < $(CURDIR)/debian/tests/patches/disable-db-tests.diff
+endif
+ifeq (,$(findstring $(DEB_HOST_ARCH),$(OOO_EXTENSIONS_ARCHS)))
+ cd $(SOURCE_TREE)/smoketest && \
+ patch -p1 -R < $(CURDIR)/debian/tests/patches/smoketest-disable-extension-tests.diff
+endif
+endif
+
+check-indep:
+ifneq (nocheck,$(findstring nocheck,$(DEB_BUILD_OPTIONS)))
+ ifeq "$(ENABLE_JAVA)" "y"
+ # since the gb_SUPPRESS_CHECK stuff in build this isn't checked.
+ # probably should, so do it here manually.
+ $(IGNORE_MAKE_CHECK_FAILURES)cd odk && \
+ $(MAKE) CustomTarget_odk/check
+ ifneq (,$(findstring -indep,$(MAKECMDGOALS)))
+ # was already checked in check
+ $(IGNORE_MAKE_CHECK_FAILURES)if [ ! -e $(STAMP_DIR)/build-arch ]; then \
+ cd odk && $(MAKE) CustomTarget_odk/build-examples && \
+ $(MAKE) CustomTarget_odk/build-examples_java; \
+ fi
+ endif
+ endif
+endif
+
+install: $(STAMP_DIR)/install-common $(STAMP_DIR)/install-arch $(STAMP_DIR)/install-indep
+
+install-common: $(STAMP_DIR)/install-common
+$(STAMP_DIR)/install-common:
+ dh_testdir
+ dh_testroot
+
+ dh_prep
+ rm -f debian/*.install debian/*.dirs
+
+ # remove those for safety in case the languages might change on
+ # testbuilds. then the /*/ in dh_installdocs in binary-* won't work
+ # anymore (different dirs)
+ rm -rf $(SOURCE_TREE)/instsetoo_native/util/LibreOffice
+
+ rm -rf $(SOURCE_TREE)/file-lists
+
+ # install LibreOffice.
+ cd $(SOURCE_TREE)/; \
+ PATH=$(BUILD_PATH) \
+ DESTDIR=$(CURDIR)/debian/tmp \
+ $(MAKE) distro-pack-install
+ export DESTDIR=$(CURDIR)/debian/tmp ;\
+ export VERSION=$(OOVER); \
+ export OOINSTBASE=$(OODIR); \
+ export OOO_LANGS_LIST="$(ISOS)"; \
+ $(CURDIR)/debian/scripts/gid2pkgdirs.sh
+ifeq "$(BUILD_DBGSYM_PACKAGES)" "y"
+ make cmd cmd="export DESTDIR=$(CURDIR)/debian/tmp; $(CURDIR)/solenv/bin/install-gdb-printers -a /usr/share/gdb/auto-load/$(OODIR) -c -i /$(OODIR) -p /usr/share/libreoffice/gdb"
+endif
+
+ # FIXME
+ cd $(CURDIR)/debian/tmp/pkg && rm -rf \*
+
+ifeq "$(ENABLE_QT5)" "y"
+ # we need to do it here. If -kde isn't built
+ # there's no -kde.install generated, so dh_missing complains later
+ mkdir -p debian/tmp/pkg/libreoffice-qt5/$(OODIR)/program
+ mv debian/tmp/pkg/libreoffice-kde/$(OODIR)/program/libvclplug_qt5lo.so\
+ debian/tmp/pkg/libreoffice-qt5/$(OODIR)/program
+endif
+ifeq "$(BUILD_KDE)" "y"
+ mv debian/tmp/pkg/libreoffice-kde \
+ debian/tmp/pkg/libreoffice-kde$(KDE_MAJOR)
+endif
+
+ifeq "$(ENABLE_HELP)" "y"
+ifeq "$(ENABLE_HTML_HELP)" "y"
+ mkdir -p debian/tmp/pkg/libreoffice-help-common/$(OODIR); \
+ mv debian/tmp/pkg/libreoffice-common/$(OODIR)/help \
+ debian/tmp/pkg/libreoffice-help-common/$(OODIR)
+endif
+endif
+
+ # prepare install/dir files for dh
+ for i in `cd $(CURDIR)/debian/tmp/pkg; ls -1 | xargs`; do \
+ echo "$${i}/usr/* usr" > debian/$$i.install; \
+ (cd debian/tmp/pkg/$$i; find . -type d | sed -e "s,\./,,") \
+ > debian/$$i.dirs; \
+ done
+
+ # the english resources should be in -common
+ cat debian/libreoffice-l10n-en-US.dirs >> debian/libreoffice-common.dirs
+ cat debian/libreoffice-l10n-en-US.install >> debian/libreoffice-common.install
+ rm -f debian/libreoffice-l10n-en-US.dirs debian/libreoffice-l10n-en-US.install
+
+ # and ca-valencia in -ca...
+ifeq (ca-valencia,$(findstring ca-valencia,$(LANGPACKISOS)))
+ if [ -f debian/libreoffice-l10n-ca-valencia.dirs -a -f debian/libreoffice-l10n-ca-valencia.install ]; then \
+ cat debian/libreoffice-l10n-ca-valencia.dirs >> debian/libreoffice-l10n-ca.dirs; \
+ cat debian/libreoffice-l10n-ca-valencia.install >> debian/libreoffice-l10n-ca.install; \
+ rm -f debian/libreoffice-l10n-ca-valencia.dirs debian/libreoffice-l10n-ca-valencia.install; \
+ fi
+endif
+ifeq "$(ENABLE_HELP)" "y"
+ifeq (ca-valencia,$(findstring ca-valencia,$(HELPISOS)))
+ if [ -f debian/libreoffice-help-ca-valencia.dirs -a -f debian/libreoffice-help-ca-valencia.install ]; then \
+ cat debian/libreoffice-help-ca-valencia.dirs >> debian/libreoffice-help-ca.dirs; \
+ cat debian/libreoffice-help-ca-valencia.install >> debian/libreoffice-help-ca.install; \
+ rm -f debian/libreoffice-help-ca-valencia.dirs debian/libreoffice-help-ca-valencia.install; \
+ fi
+endif
+endif
+ # and sr-Latn should be in -sr
+ifeq (sr-Latn,$(findstring sr-Latn,$(LANGPACKISOS)))
+ if [ -f debian/libreoffice-l10n-sr-Latn.dirs -a -f debian/libreoffice-l10n-sr-Latn.install ]; then \
+ cat debian/libreoffice-l10n-sr-Latn.dirs >> debian/libreoffice-l10n-sr.dirs; \
+ cat debian/libreoffice-l10n-sr-Latn.install >> debian/libreoffice-l10n-sr.install; \
+ rm -f debian/libreoffice-l10n-sr-Latn.dirs debian/libreoffice-l10n-sr-Latn.install; \
+ fi
+endif
+
+ # This should be in -kmr... This is different like the above where
+ # we move different "variants" into the "base" but there's only kmr-Latn
+ # for Kurmanji, but I don't really want to have that -latn suffix in
+ # the packages
+ifeq (kmr-Latn,$(findstring kmr-Latn,$(LANGPACKISOS)))
+ if [ -f debian/libreoffice-l10n-kmr-Latn.dirs -a -f debian/libreoffice-l10n-kmr-Latn.install ]; then \
+ cat debian/libreoffice-l10n-kmr-Latn.dirs >> debian/libreoffice-l10n-kmr.dirs; \
+ cat debian/libreoffice-l10n-kmr-Latn.install >> debian/libreoffice-l10n-kmr.install; \
+ rm -f debian/libreoffice-l10n-kmr-Latn.dirs debian/libreoffice-l10n-kmr-Latn.install; \
+ fi
+endif
+
+ # fixup case (-l10n-pt-BR -> l10n-pt-br etc.)
+ for iso in $(ISOS); do \
+ pkgiso=`echo $$iso | tr A-Z a-z`; \
+ if [ "$$iso" != "$$pkgiso" ]; then \
+ if [ "$$iso" != "en-US" -a \
+ -e debian/libreoffice-l10n-$$iso.dirs -a \
+ -e debian/libreoffice-l10n-$$iso.install ]; then \
+ mv debian/libreoffice-l10n-$$iso.dirs \
+ debian/libreoffice-l10n-$$pkgiso.dirs; \
+ mv debian/libreoffice-l10n-$$iso.install \
+ debian/libreoffice-l10n-$$pkgiso.install; \
+ fi; \
+ if [ -e debian/libreoffice-help-$$iso.dirs -a \
+ -e debian/libreoffice-help-$$iso.install ]; then \
+ mv debian/libreoffice-help-$$iso.dirs \
+ debian/libreoffice-help-$$pkgiso.dirs; \
+ mv debian/libreoffice-help-$$iso.install \
+ debian/libreoffice-help-$$pkgiso.install; \
+ fi; \
+ fi; \
+ done
+
+ # fix up still sneaking in ./. They break dh_install (it installs
+ # but wrongly complains about it as not-installed files)
+ perl -pi -e 's,\./,,' debian/libreoffice-common.install
+ perl -pi -e 's,\./,,' debian/ure.install
+
+ifneq "$(ENABLE_HELP)" "n"
+ # remove non-packaged localized help. This a) saves space
+ # and b) we need this for the following dh_install as there will be
+ # no .install files created and dh_install will warn/fail due
+ # to non-installed files.
+ for iso in $(filter-out en-US,$(LANGPACKISOS)); do \
+ if ! `echo $(HELPISOS) | grep -q $$iso` || [ "$$iso" = "sk" ] ; then \
+ pkgiso=`echo $$iso | tr A-Z a-z`; \
+ rm -rf debian/tmp/pkg/libreoffice-help-$$iso; \
+ rm -f debian/libreoffice-help-$$pkgiso.dirs; \
+ rm -f debian/libreoffice-help-$$pkgiso.install; \
+ fi; \
+ done
+endif
+
+ifneq "$(PACKAGE_LIBRELOGO)" "y"
+ rm -rf debian/tmp/pkg/libreoffice-librelogo
+endif
+
+ for i in calc impress draw base writer; do \
+ echo "../usr/share/appdata/libreoffice-$$i.appdata.xml /usr/share/metainfo/" >> $(PKGDIR)-$$i.install; \
+ done
+
+ifeq "$(BUILD_KDE)" "y"
+ echo "../usr/share/appdata/org.libreoffice.kde.metainfo.xml /usr/share/metainfo/" >> $(PKGDIR)-kde$(KDE_MAJOR).install
+endif
+
+ifeq "$(PACKAGE_LOKIT)" "y"
+ echo "../../../include/LibreOfficeKit usr/include" > debian/libreofficekit-dev.install
+endif
+ifeq "$(ENABLE_INTROSPECTION)" "y"
+ echo "../usr/share/gir-1.0/LOKDocView-0.1.gir /usr/share/gir-1.0/" >> debian/libreofficekit-dev.install
+ echo "../usr/lib/girepository-1.0/LOKDocView-0.1.typelib /usr/lib/$(DEB_HOST_MULTIARCH)/girepository-1.0" >> debian/gir1.2-lokdocview-0.1.install
+endif
+
+ dh_installdirs -A
+ if [ -x /usr/bin/dh_missing ]; then \
+ dh_install -A --sourcedir=debian/tmp/pkg && \
+ dh_missing -A --sourcedir=debian/tmp/pkg --fail-missing; \
+ else \
+ dh_install -A --sourcedir=debian/tmp/pkg --fail-missing; \
+ fi
+
+ # somehow this isn't installed anymore on -B builds...
+ if [ ! -f debian/libreoffice-report-builder/$(OODIR)/program/librptlo.so ]; then \
+ mkdir -p debian/libreoffice-report-builder/$(OODIR)/program/; \
+ for i in librptlo.so librptuilo.so librptxmllo.so; do \
+ cp $(CURDIR)/instdir/program/$$i \
+ debian/libreoffice-report-builder/$(OODIR)/program/; \
+ done; \
+ fi
+
+ rm -rf debian/tmp/pkg
+
+ # fix the desktop files....
+ cd $(PKGDIR)-common/$(OODIR)/share/xdg/ && \
+ for i in *.desktop; do \
+ sed -i -e "s/$(OOVER)//" $$i; \
+ done
+ifneq "$(RELEASE_BUILD)" "y"
+ cd $(PKGDIR)-common/$(OODIR)/share/xdg/ && \
+ for i in *.desktop; do \
+ sed -i -e "s/libreofficedev/libreoffice/" $$i; \
+ sed -i -e "s/LibreOfficeDev/LibreOffice/" $$i; \
+ done
+endif
+
+ # move desktop files to their correct packages (and correct dir)
+ # looks like it's pretty nonstandard to have symlinks; this breaks
+ # e.g. the generation from the appdata files. So get rid of those
+ # and move them to the libreoffice-* names after all.
+ for i in base calc draw impress math writer; do \
+ mkdir -p $(PKGDIR)-$$i/usr/share/applications; \
+ rm -f $(PKGDIR)-$$i/usr/share/applications/libreoffice-$$i.desktop; \
+ mv $(PKGDIR)-common/$(OODIR)/share/xdg/$$i.desktop \
+ $(PKGDIR)-$$i/usr/share/applications/libreoffice-$$i.desktop; \
+ done
+
+ # move pagein files
+ for i in calc draw impress writer; do \
+ mv $(PKGDIR)-core/$(OODIR)/program/pagein-$$i \
+ $(PKGDIR)-$$i/$(OODIR)/program; \
+ done
+
+ifeq "$(ENABLE_HELP)" "y"
+ # move help to /usr/share
+ ifeq "$(ENABLE_HTML_HELP)" "y"
+ mv $(PKGDIR)-help-common/usr/lib \
+ $(PKGDIR)-help-common/usr/share
+ endif
+ for iso in $(HELPISOS); do \
+ pkgiso=`echo $$iso | tr A-Z a-z`; \
+ if [ -e $(PKGDIR)-help-$$pkgiso/usr ]; then \
+ mv $(PKGDIR)-help-$$pkgiso/usr/lib \
+ $(PKGDIR)-help-$$pkgiso/usr/share; \
+ fi; \
+ done
+
+ifeq (sk,$(findstring sk,$(HELPISOS)))
+ # add fake sk help
+ mkdir -p $(PKGDIR)-help-sk/$(shell echo $(OODIR) | sed -e s/lib/share/)/help
+ ln -s cs \
+ $(PKGDIR)-help-sk/$(shell echo $(OODIR) | sed -e s/lib/share/)/help/sk
+endif
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ # move officebean.jar into -officebean (They will be moved out of -core
+ # in the install-arch target). Do the /usr/share move here already
+ mkdir -p $(PKGDIR)-core/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes; \
+ mv $(PKGDIR)-common/$(OODIR)/program/classes/officebean.jar \
+ $(PKGDIR)-core/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes
+ # fix the classpath
+ jh_classpath --classpath="ridl.jar unoil.jar jurt.jar juh.jar" \
+ $(PKGDIR)-core/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes/officebean.jar
+
+ ifeq "$(PACKAGE_BASE)" "y"
+ # move sdbc_hsqldb.jar into -base (do the move
+ # to /usr/share/java here directly, we do it for the "rest"
+ # later
+ mkdir -p $(PKGDIR)-base/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes; \
+ mkdir -p $(PKGDIR)-base/$(OODIR)/program/classes; \
+ mv $(PKGDIR)-common/$(OODIR)/program/classes/sdbc_hsqldb.jar \
+ $(PKGDIR)-base/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes; \
+ ln -s $(shell echo /$(OODIR) | sed -e s/lib/share/)/program/classes/sdbc_hsqldb.jar \
+ $(PKGDIR)-base/$(OODIR)/program/classes/sdbc_hsqldb.jar
+ ifneq (,$(filter hsqldb, $(SYSTEM_STUFF)))
+ # fix the classpath (file:// breaks javahelper)
+ jh_classpath --classpath="$(HSQLDB_JAR) .." \
+ $(PKGDIR)-base/$(shell echo /$(OODIR) | sed -e s/lib/share/)/program/classes/sdbc_hsqldb.jar
+ endif
+ ifeq (,$(filter hsqldb, $(SYSTEM_STUFF)))
+ # we need this in -base. Otherwise we get unwanted package differences
+ # in the unstable version and backports which might use internal hsqldb
+ mkdir -p $(PKGDIR)-base/$(OODIR)/program/classes
+ mv $(PKGDIR)-common/$(OODIR)/program/classes/hsqldb.jar \
+ $(PKGDIR)-base/$(OODIR)/program/classes
+ endif
+ else
+ # remove sdbc_hsqldb.jar. otherwise ends up in -java-common
+ rm -f $(PKGDIR)-common/$(OODIR)/program/classes/sdbc_hsqldb.jar
+ endif
+endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ # move arch-indep stuff into a libreoffice-dev-common
+ mkdir -p $(PKGDIR)-dev-common/usr/include
+ mv $(PKGDIR)-dev/usr/include/libreoffice \
+ $(PKGDIR)-dev-common/usr/include
+ # except include/sal/typesizes.h
+ mkdir -p $(PKGDIR)-dev/usr/include/$(DEB_HOST_MULTIARCH)/libreoffice/sal
+ mkdir -p $(PKGDIR)-dev/usr/include/libreoffice/sal
+ mv $(PKGDIR)-dev-common/usr/include/libreoffice/sal/typesizes.h \
+ $(PKGDIR)-dev/usr/include/$(DEB_HOST_MULTIARCH)/libreoffice/sal
+ cd $(PKGDIR)-dev/usr/include/libreoffice/sal/ && \
+ ln -s /usr/include/$(DEB_HOST_MULTIARCH)/libreoffice/sal/typesizes.h
+ mkdir -p $(PKGDIR)-dev-common/usr/share/idl
+ mv $(PKGDIR)-dev/usr/share/idl/libreoffice \
+ $(PKGDIR)-dev-common/usr/share/idl
+ mkdir -p $(PKGDIR)-dev-common/$(OOSDKDIR)
+ mv $(PKGDIR)-dev/$(OOSDKDIR)/classes \
+ $(PKGDIR)-dev-common/$(OOSDKDIR)
+ mv $(PKGDIR)-dev/$(OOSDKDIR)/set* \
+ $(PKGDIR)-dev-common/$(OOSDKDIR)
+ # settings/dk.mk is not arch-indep
+ mkdir -p $(PKGDIR)-dev/$(OOSDKDIR)/settings
+ mv $(PKGDIR)-dev-common/$(OOSDKDIR)/settings/dk.mk \
+ $(PKGDIR)-dev/$(OOSDKDIR)/settings
+ mv $(PKGDIR)-dev/$(OOSDKDIR)/config* \
+ $(PKGDIR)-dev-common/$(OOSDKDIR)
+ mv $(PKGDIR)-dev/$(OOSDKDIR)/index.html* \
+ $(PKGDIR)-dev-common/$(OOSDKDIR)
+ ifeq "$(ENABLE_JAVA)" "y"
+ mkdir -p $(PKGDIR)-dev-common/usr/share/libreoffice/sdk
+ mv $(PKGDIR)-dev/usr/share/libreoffice/sdk/classes \
+ $(PKGDIR)-dev-common/usr/share/libreoffice/sdk
+ endif
+ mkdir -p $(PKGDIR)-dev-common/$(OODIR)/share/glade
+ mv $(PKGDIR)-common/$(OODIR)/share/glade/libreoffice-catalog.xml \
+ $(PKGDIR)-dev-common/$(OODIR)/share/glade
+else
+ rm -rf $(PKGDIR)-common/$(OODIR)/share/glade
+endif
+
+ ifeq "$(PACKAGE_SDK_DOCS)" "y"
+ # move SDK documentation into own package
+ rm -rf $(PKGDIR)-dev-doc
+ mkdir -p $(PKGDIR)-dev-doc/usr/share/doc/libreoffice
+ mv $(PKGDIR)-dev/usr/share/doc/libreoffice/sdk \
+ $(PKGDIR)-dev-doc/usr/share/doc/libreoffice
+ mkdir -p $(PKGDIR)-dev-doc/$(OOSDKDIR)
+ ln -sf /usr/share/doc/libreoffice/sdk/docs \
+ $(PKGDIR)-dev-doc/$(OOSDKDIR)/docs
+ mv $(PKGDIR)-dev/$(OOSDKDIR)/examples \
+ $(PKGDIR)-dev-doc/$(OOSDKDIR)
+ rm -f $(PKGDIR)-dev-doc/usr/share/doc/libreoffice/sdk/readme/LICENSE*
+ # and fix the symlink now dangling due to the move above
+ cd $(PKGDIR)-dev-common/$(OOSDKDIR) && \
+ ln -sf /usr/share/doc/libreoffice/sdk/index.html
+ endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ ifeq "$(ENABLE_JAVA)" "y"
+ # compat/safety symlink for SDK Java stuff moved to /usr/share
+ rm -f $(PKGDIR)-dev-common/$(OOSDKDIR)/classes
+ mkdir -p $(PKGDIR)-dev-common/$(OOSDKDIR)/classes/com/sun/star/lib/loader
+ cd $(PKGDIR)-dev-common/$(OOSDKDIR)/classes/com/sun/star/lib/loader && \
+ for i in $(CURDIR)/$(PKGDIR)-dev-common/$(shell echo $(OOSDKDIR) | sed -e s/lib/share/)/classes/com/sun/star/lib/loader/*.class; do \
+ ln -s `echo $$i | sed -e 's,$(CURDIR)/$(PKGDIR)-dev-common,,'` `basename $$i`; \
+ done
+ ifeq "$(PACKAGE_UNOWINREG_DLL)" "y"
+ mkdir -p $(PKGDIR)-dev-common/$(OOSDKDIR)/classes/win
+ chmod 644 $(PKGDIR)-dev-common/$(shell echo $(OOSDKDIR) | sed -e s/lib/share/)/classes/win/unowinreg.dll
+ ln -s /$(shell echo $(OOSDKDIR) | sed -e s/lib/share/)/classes/win/unowinreg.dll \
+ $(PKGDIR)-dev-common/$(OOSDKDIR)/classes/win/unowinreg.dll
+ else
+ rm -rf $(PKGDIR)-dev-common/$(shell echo $(OOSDKDIR) | sed -e s/lib/share/)/classes/win
+ endif
+ endif
+ chmod 644 $(PKGDIR)-dev-common/$(OOSDKDIR)/configure.pl
+ chmod 755 $(PKGDIR)-dev-common/$(OOSDKDIR)/setsdkenv_unix
+
+ # fix permissions
+ find $(PKGDIR)-dev-common/usr/share/idl/$(OODIRNAME) -type f -exec chmod 644 {} \;
+endif
+
+ifeq "$(ENABLE_EVO2)" "y"
+ mkdir -p $(PKGDIR)-evolution/$(OODIR)/presets/database
+ mkdir -p $(PKGDIR)-evolution/$(OODIR)/share/registry
+ mv $(PKGDIR)-common/$(OODIR)/presets/database/evolocal.odb \
+ $(PKGDIR)-evolution/$(OODIR)/presets/database
+endif
+
+ # Access2Base IMHO clearly is -base specific :-)
+ifeq "$(PACKAGE_BASE)" "y"
+ mkdir -p $(PKGDIR)-base/$(OODIR)/share/basic
+ mv $(PKGDIR)-common/$(OODIR)/share/basic/Access2Base \
+ $(PKGDIR)-base/$(OODIR)/share/basic
+ cp $(PKGDIR)-common/$(OODIR)/share/basic/dialog.xlc \
+ $(PKGDIR)-base/$(OODIR)/share/basic
+ cp $(PKGDIR)-common/$(OODIR)/share/basic/script.xlc \
+ $(PKGDIR)-base/$(OODIR)/share/basic
+ # FIXME. Does not scale. This has to be a diversion...
+ t=`mktemp -q`; grep -v Access2Base $(PKGDIR)-common/$(OODIR)/share/basic/dialog.xlc > \
+ $$t && mv $$t $(PKGDIR)-common/$(OODIR)/share/basic/dialog.xlc && rm -f $$t
+ t=`mktemp -q`; grep -v Access2Base $(PKGDIR)-common/$(OODIR)/share/basic/script.xlc > \
+ $$t && mv $$t $(PKGDIR)-common/$(OODIR)/share/basic/script.xlc && rm -f $$t
+else
+ rm -rf $(PKGDIR)-common/$(OODIR)/share/basic/Access2Base
+ t=`mktemp -q`; grep -v Access2Base $(PKGDIR)-common/$(OODIR)/share/basic/dialog.xlc > \
+ $$t && mv $$t $(PKGDIR)-common/$(OODIR)/share/basic/dialog.xlc && rm -f $$t
+ t=`mktemp -q`; grep -v Access2Base $(PKGDIR)-common/$(OODIR)/share/basic/script.xlc > \
+ $$t && mv $$t $(PKGDIR)-common/$(OODIR)/share/basic/script.xlc && rm -f $$t
+endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ # move gengal stuff into -dev
+ mkdir -p $(PKGDIR)-dev/$(OODIR)/program
+ mv $(PKGDIR)-core/$(OODIR)/program/gengal.bin \
+ $(PKGDIR)-dev/$(OODIR)/program
+ mv $(PKGDIR)-common/$(OODIR)/program/gengal \
+ $(PKGDIR)-dev/$(OODIR)/program
+else
+ rm -f $(PKGDIR)-core/$(OODIR)/program/gengal.bin
+ rm -f $(PKGDIR)-common/$(OODIR)/program/gengal
+endif
+
+ifneq "$(ENABLE_REPORTBUILDER)" "y"
+ # unneeded. a no-Java arch, so the report-builder can't work anyway.
+ # (and we need to remove it here anyway as it otherwise would end up
+ # in -base/-core)
+ rm -rf $(PKGDIR)-report-builder
+ rm -f $(PKGDIR)-core/$(OODIR)/program/librpt*
+else
+ ifeq "$(PACKAGE_BASE)" "y"
+ # move rpt stuff into -report-builder-bin
+ rm -rf $(PKGDIR)-report-builder-bin
+ mkdir -p $(PKGDIR)-report-builder-bin/$(OODIR)/program
+ # it seems that --enable/--disable-reportbuiler affects the install
+ # location. sigh.
+ if [ -e $(PKGDIR)-core/$(OODIR)/program/librptlo.so ]; then \
+ i=core; else i=report-builder; fi; \
+ mv $(PKGDIR)-$$i/$(OODIR)/program/librpt* \
+ $(PKGDIR)-report-builder-bin/$(OODIR)/program
+ endif
+endif
+
+ # move uno_packages/cache to /var and create symlink for for
+ # documentation referencing it...
+ rm -rf $(PKGDIR)-common/$(OODIR)/share/uno_packages
+ mkdir -p $(PKGDIR)-core/var/spool/$(OODIRNAME)/uno_packages/cache
+ mkdir -p $(PKGDIR)-core/$(OODIR)/share/uno_packages
+ ln -s /var/spool/$(OODIRNAME)/uno_packages/cache \
+ $(PKGDIR)-core/$(OODIR)/share/uno_packages/cache
+ perl -pi -e \
+ 's,\$$UNO_SHARED_PACKAGES/cache,file:///var/spool/$(OODIRNAME)/uno_packages/cache,g' \
+ $(PKGDIR)-common/$(OODIR)/program/unorc
+ # What is this? unorc per default only mentiones
+ # share/uno_packages/cache...
+ rm -rf $(PKGDIR)-common/$(OODIR)/presets/uno_packages
+
+ifeq "$(ENABLE_FIREBIRD)" "y"
+ ifeq (,$(filter firebird, $(SYSTEM_STUFF)))
+ mkdir -p $(PKGDIR)-sdbc-firebird/$(OODIR)/share
+ mv $(PKGDIR)-common/$(OODIR)/share/firebird \
+ $(PKGDIR)-sdbc-firebird/$(OODIR)/share
+ endif
+endif
+
+ find debian/tmp ! -perm -200 | xargs -r chmod u+w
+
+ touch $@
+
+#
+# Generate maintainer scripts
+maintscripts: $(STAMP_DIR)/maintscripts
+$(STAMP_DIR)/maintscripts: $(wildcard debian/shell-lib*.sh) $(wildcard debian/*.preinst.in) $(wildcard debian/*.postinst.in) $(wildcard debian/*.prerm.in) $(wildcard debian/*.postrm.in) debian/control
+ dh_testdir
+
+ rm -f debian/*.{pre,post}{inst,rm}
+
+ # generate maintainer scripts from *.in
+ for PKG in $(PACKAGES); do \
+ for FILE in postinst postrm preinst prerm triggers; do \
+ MAINTSCRIPT=debian/$$PKG.$$FILE ; \
+ if [ -e $$MAINTSCRIPT.in ]; then \
+ sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' < $$MAINTSCRIPT.in | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' > $$MAINTSCRIPT; \
+ if grep -q "lool" $$MAINTSCRIPT.in; then \
+ cat debian/shell-lib-lool.sh >> $$MAINTSCRIPT; \
+ fi; \
+ if egrep -q "(validate_extension|sync_extension)" $$MAINTSCRIPT.in; then \
+ cat debian/shell-lib-extensions.sh >> $$MAINTSCRIPT; \
+ fi; \
+ sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' < $$MAINTSCRIPT.in | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >> $$MAINTSCRIPT; \
+ perl -pi -e "s/\@LANGPACKISOS\@/$(LANGPACKISOS)/" $$MAINTSCRIPT; \
+ perl -pi -e "s,\@OODIR\@,$(OODIR),g" $$MAINTSCRIPT; \
+ fi; \
+ done; \
+ done
+
+ touch $@
+
+# Install files generated by setup into package directories
+langpacks: $(STAMP_DIR)/langpacks
+$(STAMP_DIR)/langpacks: $(STAMP_DIR)/build-indep $(STAMP_DIR)/install-indep $(SOURCE_TREE)/bin/lo-xlate-lang
+
+ # remove empty uno_packages dirs somehow in the langpacks(?)
+ for iso in `echo $(LANGPACKISOS) | tr A-Z a-z`; do \
+ rm -rf $(PKGDIR)-l10n-$$iso/$(OODIR)/share/uno_packages; \
+ done
+
+ # remove ooo dirs somehow in the langpacks(?)
+ for iso in `echo $(LANGPACKISOS) | tr A-Z a-z`; do \
+ rm -rf $(PKGDIR)-l10n-$$iso/$(OODIR)/share/dict/ooo; \
+ done
+
+ # remove extra license files
+ for iso in `echo $(LANGPACKISOS) | tr A-Z a-z`; do \
+ rm -rf $(PKGDIR)-l10n-$$iso/$(OODIR)/licenses; \
+ rm -f $(PKGDIR)-l10n-$$iso/$(OODIR)/share/readme/LICENSE*; \
+ done
+
+ # remove extra readme files
+ for iso in `echo $(LANGPACKISOS) | tr A-Z a-z`; do \
+ rm -rf $(PKGDIR)-l10n-$$iso/$(OODIR)/readmes; \
+ rm -f $(PKGDIR)-l10n-$$iso/$(OODIR)/share/readme/README*; \
+ done
+
+ # remove empty help directories
+ for iso in `echo $(LANGPACKISOS) | tr A-Z a-z`; do \
+ rm -rf $(PKGDIR)-l10n-$$iso/$(shell echo $(OODIR) | sed -e s/lib/share/)/help; \
+ rm -rf $(PKGDIR)-l10n-$$iso/$(OODIR)/help; \
+ done
+
+ # install technical.dic
+ for iso in $(LANGPACKISOS); do \
+ if [ "$$iso" = "en-US" ]; then pkg=common; \
+ elif [ "$$iso" = "ca-valencia" ]; then pkg=l10n-ca; \
+ elif [ "$$iso" = "sr-Latn" ]; then pkg=l10n-sr; \
+ elif [ "$$iso" = "kmr-Latn" ]; then pkg=l10n-kmr; \
+ else pkg=l10n-`echo $$iso | tr A-Z a-z`; \
+ fi; \
+ mkdir -p $(PKGDIR)-$$pkg/$(OODIR)/share/wordbook/$$iso; \
+ install -m644 $(SOURCE_TREE)/extras/source/wordbook/technical.dic \
+ $(PKGDIR)-$$pkg/$(OODIR)/share/wordbook/$$iso/technical.dic; \
+ done
+
+ifeq "$(DEB_VENDOR)" "Debian"
+ # install Debian presentation template
+ otps=`cd debian/templates; echo *.otp`; \
+ for iso in $(LANGPACKISOS); do \
+ [ "$$iso" = "en-US" ] && continue; \
+ pkgiso=`echo $$iso | tr \[:upper:\] \[:lower:\]`; \
+ [ "$$pkgiso" = "ca-valencia" ] && pkgiso=ca; \
+ [ "$$pkgiso" = "sr-latn" ] && pkgiso=sr; \
+ [ "$$pkgiso" = "kmr-latn" ] && pkgiso=kmr; \
+ mkdir -p $(PKGDIR)-l10n-$$pkgiso/$(OODIR)/share/template/$$iso/presnt; \
+ for otp in $$otps; do \
+ ln -sf ../../en-US/presnt/$$otp \
+ $(PKGDIR)-l10n-$$pkgiso/$(OODIR)/share/template/$$iso/presnt/$$odt; \
+ done; \
+ done
+endif
+
+ifeq (he,$(findstring he,$(LANGPACKISOS)))
+ perl -pi -e 's#<prop oor:name="CTLSequenceChecking"><value>true</value></prop>#<prop oor:name="CTLSequenceChecking"><value>false</value></prop>#' $(PKGDIR)-l10n-he/$(OODIR)/share/registry/ctl_he.xcd
+endif
+
+ touch $@
+
+# Install files generated by setup into arch-dependent package directories
+install-arch: $(STAMP_DIR)/install-arch
+$(STAMP_DIR)/install-arch: $(STAMP_DIR)/build-arch $(STAMP_DIR)/install-common
+ dh_testdir
+ dh_testroot
+ umask 022
+
+ # move URE Java stuff to /usr/share/java
+ mkdir -p debian/ure/usr/share/java
+ifeq "$(ENABLE_JAVA)" "y"
+ mv debian/ure/$(OODIR)/program/classes/* \
+ debian/ure/usr/share/java
+ cd debian/ure/$(OODIR)/program/classes && \
+ for i in $(CURDIR)/debian/ure/usr/share/java/*.jar; do \
+ ln -sf `echo $$i | sed -e 's,$(CURDIR)/debian/ure,,'` `basename $$i`; \
+ done
+ # fix up Class-Path of jurt.jar to be able to find libjpipe.so.
+ # See http://markmail.org/message/yacqa7oowugxwmn2
+ jh_classpath --classpath="ridl.jar unoloader.jar ../../lib /$(OODIR)/program ../bin/" \
+ $(CURDIR)/debian/ure/usr/share/java/jurt.jar
+endif
+ # and the public libs to uno-libs3
+ mkdir -p debian/uno-libs3/$(OODIR)/program
+ mkdir -p debian/uno-libs3/usr/lib/$(DEB_HOST_MULTIARCH)
+ for i in debian/ure/$(OODIR)/program/libuno_*so.3; do \
+ mv $$i debian/uno-libs3/$(OODIR)/program; \
+ ln -sf /$(OODIR)/program/`basename $$i` debian/uno-libs3/usr/lib/$(DEB_HOST_MULTIARCH)/`basename $$i`; \
+ done
+ # we also need libxmlreaderlo.so, libreglo.so and libunoidllo.so (libuno_cppuhelpergcc3.so.3
+ # needs it) and libstorelo.so (libreglo.so needs it)
+ for i in libxmlreaderlo.so libreglo.so libstorelo.so libunoidllo.so; do \
+ mv debian/ure/$(OODIR)/program/$$i \
+ debian/uno-libs3/$(OODIR)/program; \
+ done
+
+
+ifeq "$(BUILD_KDE)" "y"
+ # install files for KDEs "create new" ...
+ mkdir -p $(PKGDIR)-kde$(KDE_MAJOR)/usr/share/templates/.source
+ for i in $(SOURCE_TREE)/extras/source/shellnew/*; do \
+ cp $$i $(PKGDIR)-kde$(KDE_MAJOR)/usr/share/templates/.source/`basename $$i`; \
+ done
+ cat debian/templates/soffice-template.desktop.in \
+ | sed -e "s/@APP@/Writer/" \
+ | sed -e "s/@EXT@/odt/" \
+ | sed -e "s/@TYPE@/text/" \
+ > $(PKGDIR)-kde$(KDE_MAJOR)/usr/share/templates/soffice.odt.desktop
+ cat debian/templates/soffice-template.desktop.in \
+ | sed -e "s/@APP@/Calc/" \
+ | sed -e "s/@EXT@/ods/" \
+ | sed -e "s/@TYPE@/spreadsheet/" \
+ > $(PKGDIR)-kde$(KDE_MAJOR)/usr/share/templates/soffice.ods.desktop
+ cat debian/templates/soffice-template.desktop.in \
+ | sed -e "s/@APP@/Impress/" \
+ | sed -e "s/@EXT@/odp/" \
+ | sed -e "s/@TYPE@/presentation/" \
+ > $(PKGDIR)-kde$(KDE_MAJOR)/usr/share/templates/soffice.odp.desktop
+ cat debian/templates/soffice-template.desktop.in \
+ | sed -e "s/@APP@/Draw/" \
+ | sed -e "s/@EXT@/odg/" \
+ | sed -e "s/@TYPE@/drawing/" \
+ > $(PKGDIR)-kde$(KDE_MAJOR)/usr/share/templates/soffice.odg.desktop
+endif
+
+ # split out gtk stuff
+ rm -rf $(PKGDIR)-gtk2
+ mkdir -p -m755 $(PKGDIR)-gtk2/$(OODIR)/program
+ifeq "$(BUILD_GTK3)" "y"
+ rm -rf $(PKGDIR)-gtk3
+ mkdir -p -m755 $(PKGDIR)-gtk3/$(OODIR)/program
+ mkdir -p -m755 debian/liblibreofficekitgtk/$(OODIR)/program
+ mv $(PKGDIR)-gnome/$(OODIR)/program/libvclplug_gtk3lo.so $(PKGDIR)-gtk3/$(OODIR)/program/
+ mv $(PKGDIR)-core/$(OODIR)/program/liblibreofficekitgtk.so debian/liblibreofficekitgtk/$(OODIR)/program/
+endif
+ mv $(PKGDIR)-gnome/$(OODIR)/program/* $(PKGDIR)-gtk2/$(OODIR)/program/
+ifeq "$(BUILD_GTK)" "y"
+ mkdir -p -m755 $(PKGDIR)-gtk2/$(OODIR)/share
+ ifeq "$(ENABLE_GIO)" "y"
+ mv $(PKGDIR)-gtk2/$(OODIR)/program/libucpgio1lo.so \
+ $(PKGDIR)-gnome/$(OODIR)/program/
+ endif
+ ifeq "$(ENABLE_PACKAGEKIT)" "y"
+ mv $(PKGDIR)-gtk2/$(OODIR)/program/liblosessioninstalllo.so \
+ $(PKGDIR)-gnome/$(OODIR)/program/
+ endif
+endif
+
+ifeq "$(ENABLE_EVO2)" "y"
+ mkdir -p -m755 $(PKGDIR)-evolution/$(OODIR)/program
+ mv $(PKGDIR)-gtk2/$(OODIR)/program/libevoab*.so $(PKGDIR)-evolution/$(OODIR)/program
+ mv $(PKGDIR)-gnome/$(OODIR)/share/registry/evoab.xcd \
+ $(PKGDIR)-evolution/$(OODIR)/share/registry
+endif
+
+ifeq "$(PACKAGE_BASE)" "y"
+ mkdir -p $(PKGDIR)-base-core/$(OODIR)/program
+ mv $(PKGDIR)-base/$(OODIR)/program/libdbalo.so \
+ $(PKGDIR)-base-core/$(OODIR)/program
+ mv $(PKGDIR)-base/$(OODIR)/program/libdbahsqllo.so \
+ $(PKGDIR)-base-core/$(OODIR)/program
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ ifneq (,$(filter hsqldb, $(SYSTEM_STUFF)))
+ # link to system hsqldb
+ mkdir -p $(PKGDIR)-base/$(OODIR)/program/classes
+ ln -sf $(HSQLDB_JAR) \
+ $(PKGDIR)-base/$(OODIR)/program/classes/hsqldb.jar
+ endif
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ rm -rf $(PKGDIR)-officebean
+ mkdir -p -m755 $(PKGDIR)-officebean/$(OODIR)/program/classes
+ mkdir -p -m755 $(PKGDIR)-officebean/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes
+ mv $(PKGDIR)-core/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes/officebean.jar \
+ $(PKGDIR)-officebean/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes
+ ln -s $(shell echo /$(OODIR) | sed -e s/lib/share/)/program/classes/officebean.jar \
+ $(PKGDIR)-officebean/$(OODIR)/program/classes/officebean.jar
+ mv $(PKGDIR)-core/$(OODIR)/program/libofficebean.so \
+ $(PKGDIR)-officebean/$(OODIR)/program
+endif
+
+ mkdir -p -m755 $(PKGDIR)-base/usr/share/applications \
+ $(PKGDIR)-core/usr/share/applications
+
+ sed -i -e 's/Office;/Office;Graphics;/' $(PKGDIR)-draw/usr/share/applications/libreoffice-draw.desktop
+ # invalid, according to lintian. make it shut up.
+ for i in writer calc impress draw math base; do \
+ perl -pi -e 's/Application;//; s/X-Red-Hat-Base;//; s/X-SuSE-Core-Office;//; s/X-MandrivaLinux-.*;//;' $(PKGDIR)-$$i/usr/share/applications/libreoffice-$$i.desktop; \
+ done
+
+ifeq "$(ENABLE_PYTHON)" "y"
+ # PyUNO packaging
+ install -d $(PYTHON_SITE)
+ # prepend stuff so that it works when the module is not in LOs
+ # directories but in $(PYTHON_SITE). Can't be a patch (anymore)
+ # as otherwise the python-based unittests fail miserably.
+ echo "import sys, os" > $(PYTHON_SITE)/uno.py
+ echo "sys.path.append('/$(OODIR)/program')" >> $(PYTHON_SITE)/uno.py
+ echo "os.putenv('URE_BOOTSTRAP', 'vnd.sun.star.pathname:/$(OODIR)/program/fundamentalrc')" >> $(PYTHON_SITE)/uno.py
+ cat debian/python3-uno/$(OODIR)/program/uno.py >> $(PYTHON_SITE)/uno.py
+ rm -f debian/python3-uno/$(OODIR)/program/uno.py
+ mv debian/python3-uno/$(OODIR)/program/unohelper.py $(PYTHON_SITE)
+ touch debian/python3-uno/$(OODIR)/program/pythonloader.unorc
+ chmod u+w debian/python3-uno/$(OODIR)/program/pythonloader.unorc
+ ( echo 'PYTHONHOME=file:///usr/lib/python$(PYMAJOR).$(PYMINOR)' ;\
+ echo 'PYTHONPATH=$$PYTHONHOME $$PYTHONHOME/site-packages $$PYTHONHOME/lib-dynload $$PYTHONHOME/lib-tk $$ORIGIN' \
+ ) >> debian/python3-uno/$(OODIR)/program/pythonloader.unorc
+ chmod u-w debian/python3-uno/$(OODIR)/program/pythonloader.unorc
+ ifeq "$(ENABLE_SCRIPT_PROVIDER_PYTHON)" "y"
+ rm -f debian/libreoffice-script-provider-python/$(OODIR)/share/extensions/script-provider-for-python/registration/LICENSE
+ endif
+
+ mkdir -p debian/python3-uno/usr/share/doc/python3-uno
+ cp -r $(SOURCE_TREE)/pyuno/demo \
+ debian/python3-uno/usr/share/doc/python3-uno; \
+ for i in $(SOURCE_TREE)/pyuno/doc/*; do \
+ cp $$i debian/python3-uno/usr/share/doc/python3-uno; \
+ done
+ cd debian/python3-uno/usr/share/doc/python3-uno && \
+ find . -type d -name "CVS" | xargs -r rm -rf
+endif
+
+ # should be empty now, remove if there
+ rm -rf $(PKGDIR)-core/$(OODIR)/ure
+
+ifeq "$(PACKAGE_SDK)" "y"
+ # create wrapper scripts
+ cd $(PKGDIR)-dev/$(OOSDKDIR)/bin && \
+ for i in *; do \
+ mv $$i $$i.bin && \
+ ( \
+ echo "#!/bin/sh"; \
+ echo "# wrapper script for OOos SDK programs"; \
+ echo ""; \
+ echo 'LD_LIBRARY_PATH=/$(OODIR)/program /$(OOSDKDIR)/bin/`basename $$0`.bin "$$@"'; \
+ ) > $$i; \
+ chmod 755 $$i; \
+ done
+ # remove symlink, it should be in -dev-doc
+ cd $(PKGDIR)-dev/$(OOSDKDIR) && \
+ rm docs
+
+ rm -f $(PKGDIR)-dev/usr/share/doc/libreoffice/sdk/readme/LICENSE.gz
+endif
+
+ # remove empty resource directories
+ for i in draw base writer impress calc math; do \
+ rm -rf $(PKGDIR)-$$i/$(OODIR)/program/resource; \
+ done
+
+ifeq "$(ENABLE_MINIMIZER)" "y"
+ rm -f $(PKGDIR)-presentation-minimizer/$(OODIR)/share/extensions/presentation-minimizer/registration/LICENSE
+endif
+
+ifeq "$(ENABLE_PRESENTER_CONSOLE)" "y"
+ rm -f usr/lib/libreoffice/share/extensions/presenter-screen/registration/LICENSE
+endif
+
+ifeq "$(ENABLE_MYSQLNATIVE)" "y"
+ rm -f $(PKGDIR)-mysql-connector/$(OODIR)/share/extensions/mysql-connector-ooo/registration/LICENSE
+endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ # move ui-previewer into -dev
+ mkdir -p $(PKGDIR)-dev/$(OODIR)/program
+ mv $(PKGDIR)-core/$(OODIR)/program/ui-previewer \
+ $(PKGDIR)-dev/$(OODIR)/program
+else
+ rm -f $(PKGDIR)-core/$(OODIR)/program/ui-previewer
+endif
+
+ifeq "$(USE_GSTREAMER)" "y"
+ mkdir -p $(PKGDIR)-avmedia-backend-gstreamer/$(OODIR)/program
+ mv $(PKGDIR)-core/$(OODIR)/program/libavmediagst.so \
+ $(PKGDIR)-avmedia-backend-gstreamer/$(OODIR)/program
+endif
+ifeq "$(USE_VLC)" "y"
+ mkdir -p $(PKGDIR)-avmedia-backend-vlc/$(OODIR)/program
+ mv $(PKGDIR)-core/$(OODIR)/program/libavmediavlc.so \
+ $(PKGDIR)-avmedia-backend-vlc/$(OODIR)/program
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ mkdir -p $(PKGDIR)-sdbc-hsqldb/$(OODIR)/program
+ mkdir -p $(PKGDIR)-sdbc-hsqldb/usr/lib/libreoffice/program/classes
+ mkdir -p $(PKGDIR)-sdbc-hsqldb/usr/share/libreoffice/program/classes
+ mv $(PKGDIR)-base/$(OODIR)/program/libhsqldb.so \
+ $(PKGDIR)-sdbc-hsqldb/$(OODIR)/program
+ ifneq (,$(filter hsqldb, $(SYSTEM_STUFF)))
+ mv $(PKGDIR)-base/usr/lib/libreoffice/program/classes/hsqldb.jar \
+ $(PKGDIR)-sdbc-hsqldb/usr/lib/libreoffice/program/classes
+ endif
+ for i in lib share; do \
+ mv $(PKGDIR)-base/usr/$$i/libreoffice/program/classes/sdbc_hsqldb.jar \
+ $(PKGDIR)-sdbc-hsqldb/usr/$$i/libreoffice/program/classes; \
+ done
+endif
+ifeq "$(ENABLE_FIREBIRD)" "y"
+ mkdir -p $(PKGDIR)-sdbc-firebird/$(OODIR)/program
+ mv $(PKGDIR)-core/$(OODIR)/program/libfirebird_sdbclo.so \
+ $(PKGDIR)-sdbc-firebird/$(OODIR)/program
+ ifeq (,$(filter firebird, $(SYSTEM_STUFF)))
+ for i in libEngine12.so libfbclient.so.2; do \
+ mv $(PKGDIR)-core/$(OODIR)/program/$$i \
+ $(PKGDIR)-sdbc-firebird/$(OODIR)/program; \
+ done
+ endif
+endif
+ mkdir -p $(PKGDIR)-base-drivers/$(OODIR)/program
+ for i in `find $(PKGDIR)-base/$(OODIR)/program/ -name "*.so" \
+ -a \! -name "libdbulo*" -a \! -name "libdbaxml*" -a \! -name "libdbp*" -a \! -name "libabplo.so"`; do \
+ mv $$i \
+ $(PKGDIR)-base-drivers/$(OODIR)/program; \
+ done
+
+ifeq "$(ENABLE_JAVA)" "y"
+ # somehow --has-package-version doesn't overwrite version and without <version>...</version>
+ # we get a NullPointerException when calling mh_installjar
+ for i in ridl unoloader; do \
+ sed -e s/@version@/$(shell echo $(DEB_VERSION_UPSTREAM) | cut -d~ -f1)/ \
+ < $(SOURCE_TREE)/ridljar/pom.$$i.xml > debian/pom.$$i.xml; \
+ done
+ sed -e s/@version@/$(shell echo $(DEB_VERSION_UPSTREAM) | cut -d~ -f1)/ \
+ < $(SOURCE_TREE)/jurt/pom.jurt.xml > debian/pom.jurt.xml
+ sed -e s/@version@/$(shell echo $(DEB_VERSION_UPSTREAM) | cut -d~ -f1)/ \
+ < $(SOURCE_TREE)/javaunohelper/pom.juh.xml > debian/pom.juh.xml
+
+ mh_installpoms -pure
+ for i in juh jurt ridl unoloader; do \
+ mh_installjar -pure -l debian/pom.$$i.xml instdir/program/classes/$$i.jar; \
+ done
+ sed -e s/@version@/$(shell echo $(DEB_VERSION_UPSTREAM) | cut -d~ -f1)/ \
+ < $(SOURCE_TREE)/bean/pom.officebean.xml > debian/pom.officebean.xml
+ mh_installpoms -plibreoffice-officebean
+ mh_installjar -plibreoffice-officebean -l debian/pom.officebean.xml instdir/program/classes/officebean.jar
+endif
+
+ # fix permission
+ chmod 644 $(PKGDIR)-impress/$(OODIR)/program/opengl/vortexVertexShader.glsl
+
+ for i in $(ARCH_DEP_PACKAGES); do \
+ if [ -e debian/$$i.bug-script.in ]; then \
+ cat debian/$$i.bug-script.in \
+ | sed -e "s/@PLATFORMID@/$(PLATFORMID)/" \
+ | sed -e "s/@OOVER@/$(OOVER)/" \
+ > debian/$$i.bug-script; \
+ fi ;\
+ done
+ # generate .links files from *.in
+ for PKG in $(ARCH_DEP_PACKAGES); do \
+ LINKS=debian/$$PKG.links ; \
+ if [ -e $$LINKS.in ]; then \
+ sed -e "s#\@OODIR\@#$(OODIR)#g" \
+ < $$LINKS.in > $$LINKS ; \
+ fi; \
+ done
+ for PKG in $(ARCH_DEP_PACKAGES); do \
+ case $$PKG in \
+ uno-libs*|ure*) \
+ ;; \
+ *) \
+ cat debian/changelog \
+ | sed -e '/^openoffice/,$$d' \
+ > debian/$$PKG.changelog; \
+ ;; \
+ esac; \
+ done
+
+ touch $@
+
+# Install files generated by setup into arch-independent package directories
+install-indep: $(STAMP_DIR)/install-indep
+#$(STAMP_DIR)/install-indep: debian/libreoffice.install
+#$(STAMP_DIR)/install-indep: debian/libreoffice.dirs
+$(STAMP_DIR)/install-indep: $(STAMP_DIR)/build-indep $(STAMP_DIR)/install-common
+ dh_testdir
+ dh_testroot
+
+ifneq "$(shell echo $(USE_GSTREAMER)$(USE_VLC) | grep -q y && echo 0)" "0"
+ # sound doesn't work anyway, remove the .wav files to save space
+ rm -rf $(PKGDIR)-common/$(OODIR)/share/gallery/sounds
+ rm -f $(PKGDIR)-common/$(OODIR)/share/gallery/sg9.*
+endif
+
+ rm -f $(PKGDIR)-common/$(OODIR)/program/oo_product.bmp
+
+ # install openoffice-xlate-lang
+ install -d -m755 $(PKGDIR)-common/usr/share/$(OODIRNAME)/bin
+ install -m755 $(SOURCE_TREE)/bin/lo-xlate-lang \
+ $(PKGDIR)-common/usr/share/$(OODIRNAME)/bin
+
+ifeq "$(ENABLE_HELP)" "n"
+ # when we don't build helpcontent2 here we are missing helpxsl.zip so
+ # this file doesn't get installed either. Do it manually..
+ mkdir -p -m755 $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/help && \
+ cp $(SOURCE_TREE)/xmlhelp/util/main_transform.xsl \
+ $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/help
+ cp $(SOURCE_TREE)/xmlhelp/util/idxcaption.xsl \
+ $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/help
+ cp $(SOURCE_TREE)/xmlhelp/util/idxcontent.xsl \
+ $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/help
+endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ ifeq "$(PACKAGE_SDK_DOCS)" "y"
+ rm -f $(PKGDIR)-dev-doc/usr/share/doc/libreoffice-dev-doc/LICENSE
+ perl -pi -e 's,license.html,http://www.gnu.org/licenses/lgpl.html,' \
+ $(PKGDIR)-dev-doc/$(OOSDKDIR)/index.html
+ find $(PKGDIR)-dev-doc/$(OODIR)/sdk/examples -type f -exec chmod 644 {} \;
+ endif
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ # move common Java stuff to -java-common
+ rm -rf $(PKGDIR)-java-common
+ mkdir -p $(PKGDIR)-java-common/$(OODIR)/program/classes
+ mkdir -p $(PKGDIR)-java-common/$(OODIR)/share/Scripts
+ mkdir -p $(PKGDIR)-java-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes
+ mv $(PKGDIR)-common/$(OODIR)/share/Scripts/java \
+ $(PKGDIR)-java-common/$(OODIR)/share/Scripts
+ mv $(PKGDIR)-common/$(OODIR)/program/classes/* \
+ $(PKGDIR)-java-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes
+ cd $(PKGDIR)-java-common/$(OODIR)/program/classes && \
+ for i in $(CURDIR)/$(PKGDIR)-java-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/program/classes/*; do \
+ case "`basename $$i`" in aportisdoc.jar|pexcel.jar|pocketword.jar) continue ;; \
+ *) ln -s `echo $$i | sed -e 's,$(CURDIR)/$(PKGDIR)-java-common,,'` `basename $$i` ;; esac; \
+ done
+
+ifeq "$(BUILD_TEST_PACKAGES)" "y"
+ ifeq "$(ENABLE_JUNIT4)" "y"
+ rm -rf $(PKGDIR)-subsequentcheckbase
+ mkdir -p $(PKGDIR)-subsequentcheckbase/$(OODIR)/program/classes/
+ for jar in OOoRunner test test-tools ConnectivityTools; do \
+ cp workdir/Jar/$$jar.jar $(PKGDIR)-subsequentcheckbase/$(OODIR)/program/classes/; \
+ done
+ endif
+
+ rm -rf $(PKGDIR)-smoketest-data
+ mkdir -p $(PKGDIR)-smoketest-data/usr/share/libreoffice
+ cp workdir/Extension/TestExtension.oxt \
+ $(PKGDIR)-smoketest-data/usr/share/libreoffice
+ cp workdir/Zip/smoketestdoc.sxw \
+ $(PKGDIR)-smoketest-data/usr/share/libreoffice
+endif
+endif
+
+ # fix permissions
+ for i in editpic poll savepic show webcast; do \
+ chmod 755 $(PKGDIR)-common/$(OODIR)/share/config/webcast/$$i.pl; \
+ done
+ chmod 644 $(PKGDIR)-common/$(OODIR)/LICENSE.fodt
+ chmod 644 $(PKGDIR)-common/$(OODIR)/CREDITS.fodt
+ # Do we really need this (ALV2 mandating it) or can this go?
+ chmod 644 $(PKGDIR)-common/$(OODIR)/NOTICE
+ rm -rf $(PKGDIR)-common/$(OODIR)/LICENSE
+
+ # set PYTHONPATH in unopkg
+ perl -pi -e 's,unset XENVIRONMENT,unset XENVIRONMENT\n\nexport PYTHONPATH=\"/$(OODIR)/program\"\n\n,' \
+ $(PKGDIR)-common/$(OODIR)/program/unopkg
+
+ mkdir -p debian/fonts-opensymbol/usr/share/fonts/truetype/openoffice
+ mv $(PKGDIR)-common/$(OODIR)/share/fonts/truetype/opens___.ttf \
+ debian/fonts-opensymbol/usr/share/fonts/truetype/openoffice
+ mkdir -p debian/fonts-opensymbol/etc/fonts/conf.d
+ mkdir -p debian/fonts-opensymbol/usr/share/fontconfig/conf.avail
+ # this only works with --without-fonts. Otherwise we get all stuff here,
+ # not only the Symbol->OpenSymbol part... But we don't support --with-fonts
+ # build here right now anyway.
+ mv $(PKGDIR)-common/$(OODIR)/share/fonts/truetype/fc_local.conf \
+ debian/fonts-opensymbol/usr/share/fontconfig/conf.avail/30-opensymbol.conf
+ cd debian/fonts-opensymbol/etc/fonts/conf.d/ && \
+ ln -s /usr/share/fontconfig/conf.avail/30-opensymbol.conf
+
+ # remove extra license files
+ rm -rf $(PKGDIR)-common/$(OODIR)/licenses
+ rm -f $(PKGDIR)-common/$(OODIR)/share/readme/LICENSE*
+ rm -f $(PKGDIR)-common/$(OODIR)/THIRDPARTYLICENSEREADME.html
+ rm -f $(PKGDIR)-common/$(OODIR)/LICENSE.html
+
+ # remove extra readme files
+ rm -rf $(PKGDIR)-common/$(OODIR)/readmes
+ rm -f $(PKGDIR)-common/$(OODIR)/share/readme/README*
+ rm -f $(PKGDIR)-common/$(OODIR)/README.html
+ rm -f $(PKGDIR)-common/$(OODIR)/README
+
+ # URE got moved to /usr/lib, so this is obsolete
+ for i in ure/lib ure; do \
+ if [ -e $(PKGDIR)-common/$(OODIR)/$$i ]; then \
+ rmdir $(PKGDIR)-common/$(OODIR)/$$i; \
+ fi; \
+ done
+
+ # move psprint.conf into /etc
+ mkdir -p $(PKGDIR)-common/etc/$(OODIRNAME)
+ mv $(PKGDIR)-common/$(OODIR)/share/psprint/psprint.conf \
+ $(PKGDIR)-common/etc/$(OODIRNAME)
+ ln -s /etc/$(OODIRNAME)/psprint.conf \
+ $(PKGDIR)-common/$(OODIR)/share/psprint/psprint.conf
+
+ # prepare a fake sofficerc in the place where OOo expects it
+ # which does nothing except reference the "normal" one
+ # which we put into /etc
+ mv $(PKGDIR)-common/$(OODIR)/program/sofficerc \
+ $(PKGDIR)-common/etc/$(OODIRNAME)/sofficerc
+ ( \
+ echo "# *DO NOT* CHANGE THIS FILE. IT ONLY TAKES THE SETTINGS FROM"; \
+ echo "# /etc/$(OODIRNAME)/sofficerc. CHANGE THAT FILE IF YOU"; \
+ echo "# REALLY WANT TO CHANGE SOMETHING."; \
+ echo "FHS_CONFIG_FILE=file:///etc/$(OODIRNAME)/sofficerc"; \
+ echo "" >> $(PKGDIR)-common/$(OODIR)/program/sofficerc; \
+ ) > $(PKGDIR)-common/$(OODIR)/program/sofficerc
+ cat $(PKGDIR)-common/etc/$(OODIRNAME)/sofficerc \
+ | perl -p -e 's/(.*)=(.*)/$$1=\$${\$$FHS_CONFIG_FILE:Bootstrap:$$1}/' \
+ >> $(PKGDIR)-common/$(OODIR)/program/sofficerc
+ # except for URE_BOOTSTRAP...
+ TMP=`mktemp -q`; \
+ grep -v URE_BOOTSTRAP $(PKGDIR)-common/$(OODIR)/program/sofficerc > $$TMP && mv $$TMP $(PKGDIR)-common/$(OODIR)/program/sofficerc && \
+ grep URE_BOOTSTRAP $(PKGDIR)-common/etc/$(OODIRNAME)/sofficerc >> $(PKGDIR)-common/$(OODIR)/program/sofficerc && \
+ grep -v URE_BOOTSTRAP $(PKGDIR)-common/etc/$(OODIRNAME)/sofficerc > $$TMP && mv $$TMP $(PKGDIR)-common/etc/$(OODIRNAME)/sofficerc
+
+ install -m 644 debian/soffice.sh \
+ $(PKGDIR)-common/etc/$(OODIRNAME)/soffice.sh
+
+ set -e; \
+ for i in $(IMAGES); do \
+ z=images_$$i.zip; p=$$i; \
+ if [ "$$i" = "breeze_dark" ]; then p=breeze; fi; \
+ if [ "$$i" = "sifr_dark" ]; then p=sifr; fi; \
+ mkdir -p $(PKGDIR)-style-$$p/$(shell echo $(OODIR) | sed -e s/lib/share/)/share/config; \
+ mv $(PKGDIR)-common/$(OODIR)/share/config/$$z \
+ $(PKGDIR)-style-$$p/$(shell echo $(OODIR) | sed -e s/lib/share/)/share/config/; \
+ mkdir -p $(PKGDIR)-style-$$p/$(OODIR)/share/config; \
+ ln -s /$(shell echo $(OODIR) | sed -e s/lib/share/)/share/config/$$z \
+ $(PKGDIR)-style-$$p/$(OODIR)/share/config/$$z; \
+ done
+ mkdir -p $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/share/config; \
+ mv $(PKGDIR)-common/$(OODIR)/share/config/images_helpimg.zip \
+ $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/share/config/; \
+ mkdir -p $(PKGDIR)-common/$(OODIR)/share/config; \
+ ln -s /$(shell echo $(OODIR) | sed -e s/lib/share/)/share/config/images_helpimg.zip \
+ $(PKGDIR)-common/$(OODIR)/share/config/images_helpimg.zip; \
+
+ifeq "$(DEB_VENDOR)" "Debian"
+ # install Debian presentation template
+ mkdir -p $(PKGDIR)-common/$(OODIR)/share/template/en-US/presnt
+ install -m644 debian/templates/*.otp $(PKGDIR)-common/$(OODIR)/share/template/en-US/presnt/
+endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ # add symlinks for docs and examples
+ cd $(PKGDIR)-dev-doc/$(OOSDKDIR) && \
+ rm -rf docs && \
+ ln -sf /usr/share/doc/libreoffice/sdk/docs docs
+endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ ifeq "$(ENABLE_SCRIPT_PROVIDER_BSH)" "y"
+ mkdir -p $(PKGDIR)-script-provider-bsh/$(OODIR)/share/Scripts
+ mv $(PKGDIR)-common/$(OODIR)/share/Scripts/beanshell \
+ $(PKGDIR)-script-provider-bsh/$(OODIR)/share/Scripts
+ endif
+
+ ifeq "$(ENABLE_SCRIPT_PROVIDER_JS)" "y"
+ mkdir -p $(PKGDIR)-script-provider-js/$(OODIR)/share/Scripts
+ mv $(PKGDIR)-common/$(OODIR)/share/Scripts/javascript \
+ $(PKGDIR)-script-provider-js/$(OODIR)/share/Scripts
+ endif
+
+ ifeq "$(ENABLE_MEDIAWIKI)" "y"
+ rm -f $(PKGDIR)-wiki-publisher/$(OODIR)/share/extensions/wiki-publisher/registration/LICENSE
+ rm -f $(PKGDIR)-wiki-publisher/$(OODIR)/share/extensions/wiki-publisher/license/THIRDPARTYLICENSEREADME.html
+ endif
+
+ ifeq "$(ENABLE_NLPSOLVER)" "y"
+ rm -f $(PKGDIR)-nlpsolver/$(OODIR)/share/extensions/nlpsolver/registration/LICENSE
+ endif
+endif
+
+ # unopkg creates stuff in there.
+ mkdir -p $(PKGDIR)-common/$(OODIR)/share/prereg
+ mkdir -p $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/usr/var/)/share/prereg/bundled
+ ln -s /$(shell echo $(OODIR) | sed -e s/usr/var/)/share/prereg/bundled \
+ $(PKGDIR)-common/$(OODIR)/share/prereg/bundled
+
+ # dedup
+ cd $(PKGDIR)-common/usr/share/icons && \
+ rdfind -outputname /dev/null -makesymlinks true hicolor gnome
+ # should happen on dh_link, apparently didn't fix the /home/... symlinks
+ # so do this...
+ symlinks -r -s -c $(PKGDIR)-common
+
+ # looks like it's pretty nonstandard to have symlinks; this breaks
+ # e.g. thegeneration from the appdata files. So get rid of those
+ # and move them to the libreoffice-* names after all.
+ mkdir -p $(PKGDIR)-common/usr/share/applications
+ for i in startcenter xsltfilter; do \
+ rm -f $(PKGDIR)-common/usr/share/applications/libreoffice-$$i.desktop; \
+ mv $(PKGDIR)-common/$(OODIR)/share/xdg/$$i.desktop \
+ $(PKGDIR)-common/usr/share/applications/libreoffice-$$i.desktop; \
+ done
+
+ # fix the shebangs to make lintian happy
+ sed -i "s,/usr/bin/env perl,/usr/bin/perl,g" \
+ $(PKGDIR)-common/usr/share/$(OODIRNAME)/bin/lo-xlate-lang
+ for i in $(PKGDIR)-common/$(OODIR)/share/config/webcast/*.pl; do \
+ sed -i "s,/usr/bin/env perl,/usr/bin/perl,g" $$i; \
+ done
+
+ for i in $(ARCH_INDEP_PACKAGES); do \
+ if [ -e debian/$$i.bug-script.in ]; then \
+ cat debian/$$i.bug-script.in \
+ | sed -e "s/@PLATFORMID@/$(PLATFORMID)/" \
+ > debian/$$i.bug-script; \
+ fi ;\
+ done
+ # generate .links files from *.in
+ for PKG in $(ARCH_INDEP_PACKAGES); do \
+ LINKS=debian/$$PKG.links ; \
+ if [ -e $$LINKS.in ]; then \
+ sed -e "s#\@OODIR\@#$(OODIR)#g" \
+ < $$LINKS.in > $$LINKS ; \
+ fi; \
+ done
+ for PKG in $(ARCH_INDEP_PACKAGES); do \
+ case $$PKG in \
+ *-opensymbol) \
+ ;; \
+ *) \
+ cat debian/changelog \
+ | sed -e '/^openoffice/,$$d' \
+ > debian/$$PKG.changelog; \
+ ;; \
+ esac; \
+ done
+
+ # install extension shell lib for use by extensions not from here
+ install -D -m644 debian/shell-lib-extensions.sh \
+ $(PKGDIR)-common/usr/share/$(OODIRNAME)/shell-lib-extensions.sh
+
+ifneq "$(ENABLE_HELP)" "n"
+ ifneq "$(ENABLE_HTML_HELP)" "y"
+ # those are needed in /usr/share, too
+ mkdir -p $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)
+ mv $(PKGDIR)-common/$(OODIR)/help \
+ $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)
+ endif
+endif
+ # help is in /usr/share
+ sed -i 's,$$(instpath)/help,/$(shell echo $(OODIR) | sed -e s/lib/share/)/help,' \
+ $(PKGDIR)-common/$(OODIR)/share/registry/main.xcd
+
+ # compat dirs, the split icons thing need it
+ mkdir -p $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/program
+ mkdir -p $(PKGDIR)-common/$(shell echo $(OODIR) | sed -e s/lib/share/)/program
+
+ # enable session handling and recovery
+ perl -pi -e 's,<prop oor:name="DocumentStoreUIEnabled" oor:type="xs:boolean"><value>false</value></prop>,<prop oor:name="DocumentStoreUIEnabled" oor:type="xs:boolean"><value>true</value></prop>,' $(PKGDIR)-common/$(OODIR)/share/registry/main.xcd
+
+ # examples. move where they belong
+ mkdir -p $(PKGDIR)-common/usr/share/doc/libreoffice-common/examples
+ for i in oo-ldap.xcd.sample oo-ad-ldap.xcd.sample; do \
+ mv $(PKGDIR)-common/$(OODIR)/share/registry/$$i \
+ $(PKGDIR)-common/usr/share/doc/libreoffice-common/examples; \
+ ln -s /usr/share/doc/libreoffice-common/examples/$$i $(PKGDIR)-common/$(OODIR)/share/registry/$$i; \
+ done
+
+ # register technical.dic
+ perl -pi -e 's/standard.dic;/standard.dic;technical.dic;/' $(PKGDIR)-common/$(OODIR)/share/registry/main.xcd
+
+#ifeq "$(PACKAGE_SDK)" "y"
+# # install gengal stuff into -dev
+# mkdir -p $(PKGDIR)-dev/$(OODIR)/program
+# install -m644 $(SOURCE_TREE)/svx/$(shell . $(SOURCE_TREE)/bin/get_config_variables OUTPATH PROEXT; echo $$OUTPATH$$PROEXT)/bin/gengalrc \
+# $(PKGDIR)-common/$(OODIR)/program/gengalrc
+#endif
+
+ifeq "$(ENABLE_JAVA)" "y"
+ # somehow --has-package-version doesn't overwrite version and without <version>...</version>
+ # we get a NullPointerException when calling mh_installjar
+ sed -e s/@version@/$(shell echo $(DEB_VERSION_UPSTREAM) | cut -d~ -f1)/ \
+ < $(SOURCE_TREE)/unoil/pom.unoil.xml > debian/pom.unoil.xml
+ mh_installpoms -plibreoffice-java-common
+ mh_installjar -plibreoffice-java-common -l debian/pom.unoil.xml instdir/program/classes/unoil.jar
+ # dedup. But why is this NOT a symlink from the start whereas the ure
+ # stuff is?
+ ln -sf /usr/share/java/unoil.jar $(PKGDIR)-java-common/usr/share/libreoffice/program/classes/unoil.jar
+endif
+
+ifeq "$(INSTALL_APPARMOR_PROFILES)" "y"
+ mkdir -p $(PKGDIR)-common/etc/apparmor.d
+ ./sysui/desktop/share/apparmor.sh /$(OODIR)/ sysui/desktop/apparmor/ \
+ $(PKGDIR)-common/etc/apparmor.d/ false $(CHECK_APPARMOR_PROFILES)
+ ifneq "$(ENABLE_APPARMOR_PROFILES)" "y"
+ # disable the apparmor files per default
+ mkdir -p $(PKGDIR)-common/etc/apparmor.d/disable
+ cd $(PKGDIR)-common/etc/apparmor.d/disable && \
+ for i in oosplash senddoc soffice.bin xpdfimport; do \
+ ln -sf /etc/apparmor.d/usr.lib.libreoffice.program.$$i \
+ usr.lib.libreoffice.program.$$i; \
+ done
+ endif
+endif
+
+ # fix fundamentalrc to not cause
+ # /usr/lib/libreoffice/program/../program/xpdfimport calls
+ # we know the path and the apparmor profiles disallow this...
+ sed -i "s,^BRAND_BASE_DIR=.*,BRAND_BASE_DIR=file:///$(OODIR)," \
+ $(PKGDIR)-common/$(OODIR)/program/fundamentalrc
+
+ touch $@
+
+binary-arch: $(STAMP_DIR)/binary-arch
+$(STAMP_DIR)/binary-arch: $(STAMP_DIR)/install-arch debian/control $(STAMP_DIR)/maintscripts
+ dh_testdir
+ dh_testroot
+
+ for pkg in $(ARCH_DEP_PACKAGES) ; do \
+ rm -f debian/$$pkg.*.debhelper;\
+ rm -rf debian/$$pkg/DEBIAN;\
+ done
+
+ # not for uno-libs3/ure, as it otherwise picks up a (wrong) dependency on -core.
+ # maybe we should --link-doc=uno-libs3 as everything arch-dep needs it anyway?
+ # But how does it play with .symbols then?
+ # Also not for extensions, as they have an own version
+ # python3-uno has additional examples...
+ dh_installdocs -a -A -Nure -Nuno-libs3 \
+ -Npython3-uno -Nlibreoffice-mysql-connector -Nlibreoffice -Nlibreofficekit-dev \
+ --link-doc=libreoffice-core
+ dh_installdocs -pure -puno-libs3 -ppython3-uno -plibreoffice-mysql-connector -plibreoffice -plibreofficekit-dev
+ cp workdir/CustomTarget/readlicense_oo/readme/README_en-US \
+ $(PKGDIR)-core/usr/share/doc/libreoffice-core/README
+ dh_installdebconf -a
+ dh_installman -a
+ for i in writer calc draw base math impress; do \
+ for i in `find $(PKGDIR)-$$i -type l -name "lo*.1"`; do \
+ mv $$i $$i.gz; \
+ if [ "`readlink $$i`" != "libreoffice.1.gz" ]; then \
+ ln -sf libreoffice.1.gz $$i.gz; \
+ fi; \
+ done; \
+ done
+ dh_installchangelogs -a -XChangeLog -k
+ dh_installmime -a
+ifeq "$(ENABLE_PYTHON)" "y"
+ dh_python3 -ppython3-uno --no-ext-rename --no-guessing-deps
+ dh_python3 -ppython3-uno --no-ext-rename --no-guessing-deps $(OODIR)/program
+endif
+ dh_lintian -a
+ dh_bugfiles -a -A
+ dh_link -a
+ifeq "$(BUILD_DBGSYM_PACKAGES)" "y"
+ rm -rf debian/$(UNO_LIBS_DBG_ROOT) debian/$(URE_DBG_ROOT) debian/$(CORE_DBG_ROOT) \
+ debian/$(WRITER_DBG_ROOT)
+ ifeq "$(USE_DWZ)" "y"
+ dh_dwz -a -- $(DWZ_ARGS)
+ endif
+ dh_strip -a -Nure -Nuno-libs3 $(DH_STRIP_DBG_OPTION_LO)
+ dh_strip -pure $(DH_STRIP_DBG_OPTION_URE)
+ dh_strip -puno-libs3 $(DH_STRIP_DBG_OPTION_UNO_LIBS)
+ # dh_strip --dbg-package= is not idempotent, force copying of the binaries
+ # again...
+ rm -f $(STAMP_DIR)/install-common
+ mkdir -p debian/$(CORE_DBG_ROOT)/usr/share/gdb/auto-load/$(OODIR)
+ mv $(CURDIR)/debian/tmp/usr/share/gdb/auto-load/$(OODIR)/program \
+ debian/$(CORE_DBG_ROOT)/usr/share/gdb/auto-load/$(OODIR)
+ # I think a -dbg-common is overkill. Although this means that this all only
+ # will work if libreoffice-dbg is installed..
+ mkdir -p debian/$(CORE_DBG_ROOT)/usr/share/libreoffice/gdb
+ mv $(CURDIR)/debian/tmp/usr/share/libreoffice/gdb/libreoffice \
+ debian/$(CORE_DBG_ROOT)/usr/share/libreoffice/gdb
+ mkdir -p debian/$(WRITER_DBG_ROOT)/usr/share/gdb/auto-load/$(OODIR)/program
+ mkdir -p debian/$(WRITER_DBG_ROOT)/usr/share/libreoffice/gdb/libreoffice/
+ for i in sw writerfilter; do \
+ if [ -f debian/$(CORE_DBG_ROOT)/usr/share/gdb/auto-load/$(OODIR)/program/lib$${i}lo.so-gdb.py ]; then \
+ mv debian/$(CORE_DBG_ROOT)/usr/share/gdb/auto-load/$(OODIR)/program/lib$${i}lo.so-gdb.py \
+ debian/$(WRITER_DBG_ROOT)/usr/share/gdb/auto-load/$(OODIR)/program/; \
+ fi; \
+ mv debian/$(CORE_DBG_ROOT)/usr/share/libreoffice/gdb/libreoffice/$$i.py \
+ debian/$(WRITER_DBG_ROOT)/usr/share/libreoffice/gdb/libreoffice; \
+ done
+
+ # FIXME: or better ure-dbg (ure/lib?). Then again ure is a link which is in -common
+ # anyways...
+ mkdir -p debian/$(UNO_LIBS_DBG_ROOT)/usr/share/gdb/auto-load/$(OODIR)/program
+ mv debian/$(CORE_DBG_ROOT)/usr/share/gdb/auto-load/$(OODIR)/program/libuno_cppu.so.3-gdb.py \
+ debian/$(UNO_LIBS_DBG_ROOT)/usr/share/gdb/auto-load/$(OODIR)/program
+ mv debian/$(CORE_DBG_ROOT)/usr/share/gdb/auto-load/$(OODIR)/program/libuno_sal.so.3-gdb.py \
+ debian/$(UNO_LIBS_DBG_ROOT)/usr/share/gdb/auto-load/$(OODIR)/program
+ mkdir -p debian/$(UNO_LIBS_DBG_ROOT)/usr/share/libreoffice/gdb/libreoffice
+ mv debian/$(CORE_DBG_ROOT)/usr/share/libreoffice/gdb/libreoffice/cppu.py \
+ debian/$(UNO_LIBS_DBG_ROOT)/usr/share/libreoffice/gdb/libreoffice
+ mv debian/$(CORE_DBG_ROOT)/usr/share/libreoffice/gdb/libreoffice/sal.py \
+ debian/$(UNO_LIBS_DBG_ROOT)/usr/share/libreoffice/gdb/libreoffice
+else
+ dh_strip -a
+endif
+ dh_fixperms -a
+ifeq "$(BUILD_DBGSYM_PACKAGES)" "y"
+ # dh_fixperms is not run on -dbgsym. And we get 0775 directories. Fix it
+ # manually
+ #16:29 < nthykier> _rene_: I would recommend a "find debian/$(CORE_DBG_ROOT)
+ # debian/$(UNO_LIBS_DBG_ROOT) debian/$(WRITER_DBG_ROOT) -exec
+ # chmod go=rX,u+rw,a-s {} +"
+ #16:29 < nthykier> Should be faster and is the same expression as used by
+ # dh_fixperms
+ find debian/$(CORE_DBG_ROOT) debian/$(UNO_LIBS_DBG_ROOT) debian/$(WRITER_DBG_ROOT) ! -type l -exec chmod go=rX,u+rw,a-s {} +
+endif
+ dh_icons -a
+ dh_compress -a -X.py -X.mk -X.sxd
+ifeq "$(ENABLE_INTROSPECTION)" "y"
+ dh_girepository -a debian/liblibreofficekitgtk/$(OODIR)/program
+endif
+ dh_strip_nondeterminism -a
+ dh_makeshlibs -puno-libs3 -V"uno-libs3 (>= $(shell grep UREPACKAGEVERSION $(SOURCE_TREE)/instsetoo_native/util/openoffice.lst | awk '{ print $$2 }' | cut -d. -f1-3)~), ure" -- -c0 -d -V -v`echo $(BINARY_VERSION) | cut -d: -f2`
+ dh_makeshlibs -n -pure -V"ure (>= $(shell grep UREPACKAGEVERSION $(SOURCE_TREE)/instsetoo_native/util/openoffice.lst | awk '{ print $$2 }' | cut -d. -f1-3)~)" -- -d -V -v`echo $(BINARY_VERSION) | cut -d: -f2`
+ dh_installdeb -a
+ rm -f debian/shlibs.local
+ifeq "$(BUILD_KFREEBSD)" "y"
+ cat debian/shlibs.override.libc >> debian/shlibs.local
+endif
+ # no shlibs dependencies on internal libs (which are dynamic)
+ifeq (,$(filter icu, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.icu >> debian/shlibs.local
+endif
+ifeq (,$(filter libvisio, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libvisio >> debian/shlibs.local
+endif
+ifeq (,$(filter libwpd, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libwpd >> debian/shlibs.local
+endif
+ifeq (,$(filter libwpg, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libwpg >> debian/shlibs.local
+endif
+ifeq (,$(filter libwps, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libwps >> debian/shlibs.local
+endif
+ifeq (,$(filter libodfgen, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libodfgen >> debian/shlibs.local
+endif
+ifeq (,$(filter libmwaw, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libmwaw >> debian/shlibs.local
+endif
+ifeq (,$(filter librevenge, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.librevenge >> debian/shlibs.local
+endif
+ifeq (,$(filter libetonyek, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libetonyek >> debian/shlibs.local
+endif
+ifeq (,$(filter libstaroffice, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libstaroffice >> debian/shlibs.local
+endif
+ifeq (,$(filter orcus, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.orcus >> debian/shlibs.local
+endif
+ifeq (,$(filter liblangtag, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.liblangtag >> debian/shlibs.local
+endif
+ # the other way as the above, depend on a newer libcmis to that the
+ # advertised google 2-factor-auth fixes are present
+ifneq (,$(filter libcmis, $(SYSTEM_STUFF)))
+ cat debian/shlibs.override.libcmis >> debian/shlibs.local
+endif
+ifeq "$(ENABLE_FIREBIRD)" "y"
+ifneq (,$(filter firebird, $(SYSTEM_STUFF)))
+ # force the values of .shlibs which gives us a (wanted) (>= 3.0.0~)
+ # instead of .symbols which gives os only a (>= 2.5.0.25784~ReleaseCandidate1.ds2)...
+ cat /var/lib/dpkg/info/libfbclient2*.shlibs >> debian/shlibs.local
+endif
+endif
+
+ LD_LIBRARY_PATH="$(FAKEROOT_LIBDIR):debian/uno-libs3/$(OODIR)/program:debian/ure/$(OODIR)/program:$(PKGDIR)-core/$(OODIR)/program:$(PKGDIR)-base-core/$(OODIR)/program:$(PKGDIR)-base/$(OODIR)/program:$(PKGDIR)-writer/$(OODIR)/program" \
+ dh_shlibdeps -a \
+ -Lure -Luno-libs3 \
+ -ldebian/uno-libs3/$(OODIR)/program:debian/ure/$(OODIR)/program:$(PKGDIR)-core/$(OODIR)/program:$(PKGDIR)-base/$(OODIR)/program \
+ $(SHLIBS_OVERRIDE)
+ifneq (,$(filter redland, $(SYSTEM_STUFF)))
+ # dpkg-shlibdeps "in practice" always will look for this in
+ # /usr/lib/openoffice/basisX.Y/program due to the RPATH and the
+ # dh_shlibdeps would fail. It's excluded, and we now need to do it
+ # manually. Saves us a versioned build-conflict with ourselves
+ # which quickly can get outdated
+ perl -pi -e 's/(shlibs.*$$)/$$1, $(shell cat /var/lib/dpkg/info/$(shell dpkg -S /usr/lib/$(DEB_HOST_MULTIARCH)/`objdump -p $(PKGDIR)-core/$(OODIR)/program/libunordf*.so | grep NEEDED | grep librdf | awk '{ print $$2 }'` | cut -d: -f1)\:$(DEB_HOST_ARCH).shlibs | awk '{ print $$3,$$4,$$5 }')/' $(PKGDIR)-core.substvars
+endif
+ # Clean up .substvars values added by uno-libs3.symbols (adds uno-libs3, ure):
+ # 1) don't make uno-libs3 depend on ure...
+ perl -pi -e 's/, ure$$//' debian/uno-libs3.substvars
+ # 2) and prevent ure to depend on itself..
+ perl -pi -e 's/, ure \(.*\)$$//' debian/ure.substvars
+ ifneq (,$(filter coinmp, $(SYSTEM_STUFF)))
+ perl -pi -e "s/coinor-libcoinutils3v5/coinor-libcoinutils3v5 $(COINUTILS_MINVER)/" \
+ debian/libreoffice-calc.substvars
+ perl -pi -e "s/coinor-libcoinmp1v5/coinor-libcoinmp1v5 $(COINMP_MINVER)/" \
+ debian/libreoffice-calc.substvars
+ endif
+ifeq "$(ENABLE_JAVA)" "y"
+ for p in $(ARCH_DEP_PACKAGES); do \
+ if [ "$$p" = "libreoffice-presentation-console" ]; then continue; fi; \
+ jh_depends -p$$p -Xure; \
+ done
+ ifeq "$(PACKAGE_BASE)" "y"
+ perl -pi -e "s/base-files,//" \
+ debian/libreoffice-sdbc-hsqldb.substvars
+ endif
+ # jh_depends adds ure (${source:Version}) entries. They are overly strict
+ # and do not fit anyway given ure has a different versioning scheme. Excluded
+ # above, readd here unversioned
+ perl -pi -e 's/^(java:Depends.*$$)/\1, ure/' \
+ debian/libreoffice-officebean.substvars
+endif
+# This switch to dh_shlibdeps reduces the 'libXXX not found' warnings but
+# causes ldd crashes sometimes when used with fakeroot:
+# -l $(PKGDIR)-core/$(OPENOFFICEDIR)/program
+ dh_gencontrol -a $(DEBHELPER_OPTIONS) -Nure -Nuno-libs3 \
+ -Nlibreoffice-mysql-connector -- \
+ -V"ure:Version=$(shell grep UREPACKAGEVERSION $(SOURCE_TREE)/instsetoo_native/util/openoffice.lst | awk '{ print $$2 }')" \
+ -V'base-version=$(BASE_VERSION)' \
+ -V'oover=$(OOVER)' \
+ -V'next-oover=$(NEXT_OOVER)' \
+ -V'help-l10n-virtual-version=$(HELP_L10N_VIRTUAL_VERSION)' \
+ -V'base-hsqldb-depends=$(BASE_HSQLDB_DEPENDS)' \
+ -V'base-firebird-recommends=$(BASE_FIREBIRD_RECOMMENDS)' \
+ -V'java-common-depends=$(JAVA_COMMON_DEPENDS) $(JAVA_COMMON_DEPENDS_VERSION)' \
+ -V'java-runtime-depends=$(JAVA_RUNTIME_DEPENDS)' \
+ -V'Binary-Version=$(BINARY_VERSION)' \
+ -V'ooo-officebean-dep=$(OOO_OFFICEBEAN_DEP)' \
+ -V'kde-iconset-dep=$(KDE_ICONSET_DEP)' \
+ -V'lpsolve-dep=$(LPSOLVE_DEP)' \
+ -V'gstreamer-plugins-suggests=$(GSTREAMER_PLUGINS_SUGGESTS)' \
+ -V'libebook-dep=$(LIBEBOOK_DEP)' \
+ -V'libvlc-dep=$(LIBVLC_DEP)' \
+ -V'idlc-cpp-depends=$(IDLC_CPP_DEPENDS)' \
+ -V'pyuno-depends=$(PYUNO_DEPENDS)' \
+ -V'avmedia-be-depends=$(AVMEDIA_BE_DEPENDS)' \
+ -V'gnome-gtk-recommends=$(GNOME_GTK_RECOMMENDS)' \
+ -V'firebird-engine-depends=$(FIREBIRD_ENGINE_DEPENDS)' \
+ -V'libsane-suggests=$(shell dpkg -S /usr/lib/$(DEB_HOST_MULTIARCH)/libsane.so.1 | cut -d: -f1)' \
+ -v$(BINARY_VERSION)
+ifneq (,$(findstring $(DEB_HOST_ARCH),$(OOO_ARCH_DEP_EXTENSIONS_ARCHS)))
+ifeq "$(PACKAGE_BASE)" "y"
+ ifeq "$(ENABLE_MYSQLNATIVE)" "y"
+ dh_gencontrol -plibreoffice-mysql-connector -- \
+ -v$(shell grep "<version" $(SOURCE_TREE)/mysqlc/source/description.xml | perl -pi -e 's,<version value=\"(.*)\" />,\1,; s/^\s+//; s/\s+$$//')+LibO`echo $(BINARY_VERSION) | cut -d: -f2`
+ endif
+endif
+endif
+ dh_gencontrol -pure -puno-libs3 -- \
+ -V"ure:Version=`echo $(BINARY_VERSION) | cut -d: -f2`" \
+ -v"`echo $(BINARY_VERSION) | cut -d: -f2`"
+ifeq "$(BUILD_DBGSYM_PACKAGES)" "y"
+ for i in libreoffice-core libreoffice-writer uno-libs3; do \
+ perl -pi -e 's/^(Depends:.*)/\1\nRecommends: gdb, python3-six/' \
+ debian/.debhelper/$$i/dbgsym-root/DEBIAN/control; \
+ done
+ for i in $(filter-out uno-libs3,$(ARCH_DEP_PACKAGES)); do \
+ perl -pi -e 's/^(Depends:.*)/\1, uno-libs3-dbgsym/' \
+ debian/.debhelper/$$i/dbgsym-root/DEBIAN/control; \
+ done
+ perl -pi -e 's/Recommends: /Recommends: libreoffice-core-dbgsym, /' \
+ debian/$(WRITER_DBG_ROOT)/DEBIAN/control
+endif
+
+ dh_md5sums -a
+ dh_builddeb -a $(DEBHELPER_OPTIONS)
+
+ touch $@
+
+binary-indep: $(GSI_EXPORT_STAMP) $(STAMP_DIR)/binary-indep
+$(STAMP_DIR)/binary-indep: $(STAMP_DIR)/install-indep debian/control $(STAMP_DIR)/maintscripts $(STAMP_DIR)/langpacks
+ifneq ($(DEB_HOST_ARCH),$(findstring $(DEB_HOST_ARCH),$(OOO_JAVA_ARCHS)))
+ echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+ echo "For uploads with binary-all packages, please use arches where Java is enabled"
+ echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+endif
+ dh_testdir
+ifneq ($(PACKAGE_SDK_DOCS),y)
+ echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+ echo "For uploads with binary-all packages, please use arches where the SDK docs are enabled!!!!"
+ echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+endif
+ dh_testdir
+ dh_testroot
+
+ for pkg in $(ARCH_INDEP_PACKAGES) ; do \
+ rm -f debian/$$pkg.*.debhelper;\
+ rm -rf debian/$$pkg/DEBIAN;\
+ done
+
+ifeq "$(ENABLE_HELP)" "y"
+ifeq "$(ENABLE_HTML_HELP)" "y"
+ HELP_FILES_COMMON=`find $(CURDIR)/debian/libreoffice-help-common/usr/share -type f | sed -e 's,$(CURDIR)/debian/libreoffice-help-common,,g' | xargs`; \
+ for iso in $(HELPISOS); do \
+ pkgiso=`echo $$iso | tr A-Z a-z`; \
+ HELP_FILES_LANG=`find $(CURDIR)/debian/libreoffice-help-$$pkgiso/usr/share | sed -e "s,$(CURDIR)/debian/libreoffice-help-$$pkgiso,,g" | xargs`; \
+ TMP=`mktemp -q`; \
+ cp debian/libreoffice-help.doc-base.in $$TMP; \
+ echo "Files: $$HELP_FILES_COMMON $$HELP_FILES_LANG" >> $$TMP; \
+ cat $$TMP | perl -e 'while(<>) { if (/^Files/) {$$f=1;} if ($$f eq "1") { chomp(); } print $$_; }' > debian/libreoffice-help-$$pkgiso.doc-base; \
+ rm -f $$TMP; \
+ perl -pi -e 's,([a-z])\/usr/,$$1 \/usr/,g' debian/libreoffice-help-$$pkgiso.doc-base; \
+ perl -pi -e 's,([0-9])\/usr/,$$1 \/usr/,g' debian/libreoffice-help-$$pkgiso.doc-base; \
+ sed -i s/@LCODE@/$$pkgiso/ debian/libreoffice-help-$$pkgiso.doc-base; \
+ sed -i s/@HELPISO@/$$iso/ debian/libreoffice-help-$$pkgiso.doc-base; \
+ done
+endif
+endif
+
+ifeq "$(PACKAGE_SDK)" "y"
+ for i in idl cpp java; do \
+ cat debian/lo-$$i-ref.in \
+ | sed -e "s/@lo_sources_ver@/$(lo_sources_ver)/" \
+ > debian/libreoffice-dev-doc.doc-base.lo-$$i-ref; \
+ done
+ for i in idl cpp; do \
+ UDK_FILES=`find $(CURDIR)/debian/libreoffice-dev-doc/usr/share/doc/libreoffice/sdk/docs/$$i/ref -type f ! -name "*.map" -a ! -name "*.md5" | sed -e 's,$(CURDIR)/debian/libreoffice-dev-doc,,g' | xargs`; \
+ TMP=`mktemp -q`; \
+ cp debian/libreoffice-dev-doc.doc-base.lo-$$i-ref $$TMP; \
+ echo "Files: $$UDK_FILES" >> $$TMP; \
+ cat $$TMP | perl -e 'while(<>) { if (/^Files/) {$$f=1;} if ($$f eq "1") { chomp(); } print $$_; }' > debian/libreoffice-dev-doc.doc-base.lo-$$i-ref; \
+ rm -f $$TMP; \
+ perl -pi -e 's,([a-z])\/usr/,$$1 \/usr/,g' debian/libreoffice-dev-doc.doc-base.lo-$$i-ref; \
+ done
+ ifeq "$(ENABLE_JAVA)" "y"
+ UDK_JAVA_FILES=`find $(CURDIR)/debian/libreoffice-dev-doc/usr/share/doc/libreoffice/sdk/docs/java/ref -type f ! -name "javadoc_log.txt" | sed -e 's,$(CURDIR)/debian/libreoffice-dev-doc,,g' | xargs`; \
+ echo "Files: $$UDK_JAVA_FILES" >> debian/libreoffice-dev-doc.doc-base.lo-java-ref
+ rm -f $(CURDIR)/debian/libreoffice-dev-doc/usr/share/doc/libreoffice-dev/sdk/docs/java/ref/javadoc_log.txt
+ endif
+endif
+ # not for fonts-opensymbol and extensions, as they have an own version.
+ # And librelogo gets an own changelog
+ # And libreofficekit gets an own README
+ # libreoffice-dev-doc installs directly into /usr/share/doc/libreoffice-dev...
+ dh_installdocs -i -A -Nlibreoffice-librelogo -Nfonts-opensymbol \
+ -Nlibreoffice-wiki-publisher -Nlibreoffice-nlpsolver \
+ -Nlibreoffice-dev-doc -Nlibreoffice-smoketest-data \
+ --link-doc=libreoffice-common
+ dh_installdocs -plibreoffice-librelogo -pfonts-opensymbol -plibreoffice-wiki-publisher -plibreoffice-nlpsolver -plibreoffice-smoketest-data \
+ -plibreoffice-dev-doc
+ cp workdir/CustomTarget/readlicense_oo/readme/README_en-US \
+ $(PKGDIR)-common/usr/share/doc/libreoffice-common/README
+ dh_installman -i
+ for i in `find $(PKGDIR)-common -type l -name "lo*.1"`; do \
+ mv $$i $$i.gz; \
+ if [ "`readlink $$i`" != "libreoffice.1.gz" ]; then \
+ ln -sf libreoffice.1.gz $$i.gz; \
+ fi; \
+ done
+ dh_installchangelogs -i -XChangeLog -Nlibreoffice-librelogo -k
+ifeq "$(PACKAGE_LIBRELOGO)" "y"
+ dh_installchangelogs -plibreoffice-librelogo -k librelogo/source/ChangeLog
+endif
+ifeq "$(PACKAGE_SDK_DOCS)" "y"
+ dh_doxygen -plibreoffice-dev-doc
+endif
+ dh_installmime -i
+ifeq "$(ENABLE_HELP)" "y"
+ ifeq "$(ENABLE_HTML_HELP)" "y"
+ for iso in $(shell echo $(HELPISOS) | tr A-Z a-z); do \
+ sed -e s/@LCODE@/$$iso/ < debian/libreoffice-help.lintian-overrides.in \
+ > debian/libreoffice-help-$$iso.lintian-overrides; \
+ done
+ endif
+endif
+ dh_lintian -i
+ dh_bugfiles -i -A
+ifeq "$(STRETCH_BACKPORT)" "y"
+ dh_link -i -Nlibreoffice-help-common
+else
+ dh_link -i
+endif
+ dh_fixperms -i
+ dh_icons -i
+ifeq "$(INSTALL_APPARMOR_PROFILES)" "y"
+ for i in oosplash senddoc soffice.bin xpdfimport; do \
+ dh_apparmor -plibreoffice-common --profile-name=usr.lib.libreoffice.program.$$i; \
+ done
+endif
+ dh_compress -i -X.py -X.mk -X.sxd -X.xcd.sample
+ dh_strip_nondeterminism -i
+ dh_installdeb -i
+ifeq "$(ENABLE_JAVA)" "y"
+ for p in $(ARCH_INDEP_PACKAGES); do \
+ if echo "$$p" | grep -q help; then continue; fi; \
+ jh_depends -p$$p \
+ -Xlibreoffice-report-builder; \
+ done
+endif
+ # and it adds a librhino-java Depends where we still use internal rhino
+ perl -pi -e "s/librhino-java//" \
+ debian/libreoffice-script-provider-js.substvars
+ifeq "$(BUILD_TEST_PACKAGES)" "y"
+ perl -pi -e 's/junit4/junit4 $(JUNIT_MIN_VER)/' \
+ debian/libreoffice-subsequentcheckbase.substvars
+endif
+ dh_gencontrol -i $(DEBHELPER_OPTIONS) \
+ -Nlibreoffice-wiki-publisher \
+ -Nlibreoffice-nlpsolver \
+ -Nfonts-opensymbol -- \
+ -V'base-version=$(BASE_VERSION)' \
+ -V'oover=$(OOVER)' \
+ -V'next-oover=$(NEXT_OOVER)' \
+ -V'help-l10n-virtual-version=$(HELP_L10N_VIRTUAL_VERSION)' \
+ -V'java-common-depends=$(JAVA_COMMON_DEPENDS)' \
+ -V'java-runtime-depends=$(JAVA_RUNTIME_DEPENDS)' \
+ -V'textcat-data-recommends=$(TEXTCAT_DATA_RECOMMENDS)' \
+ -V'numbertext-data-recommends=$(NUMBERTEXT_DATA_RECOMMENDS)' \
+ -V'pyuno-depends=$(PYUNO_DEPENDS)' \
+ -V'help-depends=$(HELP_DEPENDS)' \
+ -V'help-common-depends=$(HELP_COMMON_DEPENDS)' \
+ -V'Binary-Version=$(BINARY_VERSION)' \
+ -v$(BINARY_VERSION)
+ dh_gencontrol -pfonts-opensymbol -- \
+ -v$(shell echo `echo $(BINARY_VERSION) | cut -d: -f1` + 1 | bc):$(shell fontforge -lang=ff -c 'Open($$1); Print ($$fontversion); Quit(0);' debian/fonts-opensymbol/usr/share/fonts/truetype/openoffice/opens___.ttf)+LibO`echo $(BINARY_VERSION) | cut -d: -f2`
+ifeq "$(ENABLE_MEDIAWIKI)" "y"
+ dh_gencontrol -plibreoffice-wiki-publisher -- \
+ -V'java-common-depends=$(JAVA_COMMON_DEPENDS)' \
+ -V'java-runtime-depends=$(JAVA_RUNTIME_DEPENDS)' \
+ -v$(shell grep "<version" $(SOURCE_TREE)/swext/mediawiki/src/description.xml | perl -pi -e 's,<version value=\"(.*)\"/>,\1,; s/^\s+//')+LibO`echo $(BINARY_VERSION) | cut -d: -f2`
+endif
+ifeq "$(ENABLE_NLPSOLVER)" "y"
+ dh_gencontrol -plibreoffice-nlpsolver -- \
+ -V'java-common-depends=$(JAVA_COMMON_DEPENDS)' \
+ -V'java-runtime-depends=$(JAVA_RUNTIME_DEPENDS)' \
+ -v$(shell grep "<version" $(SOURCE_TREE)/nlpsolver/src/com/sun/star/comp/Calc/NLPSolver/description.xml | perl -pi -e 's,<version value=\"(.*)\"/>,\1,; s/^\s+//')+LibO`echo $(BINARY_VERSION) | cut -d: -f2`
+endif
+ifeq "$(ENABLE_REPORTBUILDER)" "y"
+ dh_gencontrol -plibreoffice-report-builder -- \
+ -V'base-version=$(BASE_VERSION)' \
+ -V'report-builder-jar-depends=$(REPORT_BUILDER_JAR_DEPENDS)' \
+ -V'java-runtime-depends=$(JAVA_RUNTIME_DEPENDS)'
+endif
+ dh_md5sums -i
+ dh_builddeb -i $(DEBHELPER_OPTIONS)
+
+ touch $@
+
+binary: binary-arch binary-indep
+
+ifeq "$(USE_GIT_TARBALLS)" "y"
+
+# $(1) is the upstream name of the repo
+# $(2) is the name of the tarball
+# $(3) is the path to archive (empty for everything)
+#
+# according to policy get-orig-source has to download to the current dir, thus
+# should not require a dh_testdir. However, like this we can have clean deps
+# from build and download the source, configure, build, pack in on piece. As
+# get-orig-source is an optional target anyway, we stick to support only this
+# case and not random dirs. see also: debian bug 494141
+# also, we need to run configure to create the external tarball anyway
+
+GIT_INSTALLED:=$(shell which git >/dev/null 2>/dev/null && echo "y")
+
+get_orig_tarball=$(CURDIR)/../libreoffice_$(DEB_VERSION_UPSTREAM).orig$(1).tar.xz
+
+define pack_gittarball
+$(if $(GIT_INSTALLED),,$(error You need git.))
+dh_testdir
+TMPD=`mktemp -d $(if $(TMP),-p $(TMP))` && \
+mkdir $${TMPD}/archive && \
+git clone --bare $(GIT_BASEURL)/$(1) $${TMPD}/repo -b $(GIT_BRANCH) && \
+git archive --remote $${TMPD}/repo --format=tar --prefix libreoffice-$(DEB_VERSION_UPSTREAM)/ $(GIT_TAG) |tar x -C $${TMPD}/archive && \
+tar cvJf $(2) -C $${TMPD}/archive/$(3) --transform 's,./,,' . && \
+rm -rf $${TMPD}
+endef
+
+define unpack_gittarball
+dh_testdir
+mkdir -p $(CURDIR)/$(1)
+test -f $(CURDIR)/$(1)/.gitignore || tar xvJf $(2) -C $(CURDIR)/$(1) $(3)
+endef
+
+ifneq ($(filter get-orig-source unpack,$(MAKECMDGOALS)),)
+$(call get_orig_tarball):
+ $(call pack_gittarball,core,$@,)
+
+$(call get_orig_tarball,-helpcontent2):
+ $(call pack_gittarball,help,$@,libreoffice-$(DEB_VERSION_UPSTREAM)/)
+
+$(call get_orig_tarball,-%):
+ $(call pack_gittarball,$*,$@,libreoffice-$(DEB_VERSION_UPSTREAM)/)
+
+# Get upstream external sources
+$(call get_orig_tarball,-tarballs): helpcontent2/makefile.pmk translations/makefile.mk .gitignore
+ dh_testdir
+ rm -rf tarballs
+ mkdir -p tarballs
+ quilt push -a
+ ./autogen.sh $(filter-out --disable-fetch-external,$(CONFIGURE_FLAGS)) --with-all-tarballs
+ $(MAKE) download gb_LO_VER=$(DEB_VERSION_UPSTREAM)
+ tar cvJf $@ -C tarballs --transform 's,./,,' .
+
+# using flag files for unpacking
+.gitignore: $(call get_orig_tarball)
+ $(call unpack_gittarball,,$<,--strip-components=1)
+
+translations/makefile.mk: $(call get_orig_tarball,-translations)
+ $(call unpack_gittarball,translations,$<,)
+
+helpcontent2/makefile.pmk: $(call get_orig_tarball,-helpcontent2)
+ $(call unpack_gittarball,helpcontent2,$<,)
+
+tarballs/fetch.log: $(call get_orig_tarball,-tarballs) patched
+ $(call unpack_gittarball,tarballs,$<,)
+
+get-orig-source: $(call get_orig_tarball,-tarballs) tarballs/fetch.log
+ dh_testdir
+
+unpack: tarballs/fetch.log
+ dh_testdir
+endif
+else
+get-orig-source:
+ PATH=$(CURDIR)/debian/scripts:$$PATH uscan --watchfile=$(CURDIR)/debian/watch --verbose --force
+endif
+
+.PHONY: control
+.PHONY: clean-debdir clean-instsetoo clean-objectdirs clean default
+.PHONY: prepare build build-indep build-arch install-arch install-indep
+.PHONY: get-orig-source unpack patched
+.PHONY: $(stampdir_targets)
+
+# vim:set noet ai sts=8 sw=8 tw=0:
--- /dev/null
+#!/bin/sh
+
+libs=`grep libebook.*\.so connectivity/source/drivers/evoab2/EApi.cxx | perl -pe 's/\s+\"(.*)\".*/$1/'`
+
+for l in $libs; do
+ if [ -e "/usr/lib/`dpkg-architecture -qDEB_HOST_MULTIARCH`/$l" ]; then
+ p=/usr/lib/`dpkg-architecture -qDEB_HOST_MULTIARCH`
+ else
+ if [ -e /usr/lib/$l ]; then
+ p=/usr/lib
+ else
+ continue
+ fi
+ fi
+ # sanity check: do the libs match with what we would get
+ # for our libebook version if we followed the .so symlink?
+ l1=`readlink $p/$l`
+ l2_tmp=`echo $l | perl -pe 's/(.*)\.\d+$/$1/'`
+ l2=`readlink $p/$l2_tmp`
+ l3=`readlink $p/$l2`
+ if [ "$l1" = "$l2" -o "$l1" = "$l3" ]; then
+ dep=`dpkg -S $p/$l | cut -d: -f1`
+ fi
+done
+
+if [ -n "$dep" ]; then
+ echo $dep
+else
+ echo "Cannot find libebook dependency. None of the following libs found:"
+ echo $libs
+ exit 1
+fi
+
--- /dev/null
+#!/bin/sh
+
+libs=`grep libvlc.*\.so avmedia/source/vlc/wrapper/SymbolLoader.hxx | grep -v vlccore | cut -d= -f2 | perl -pe 's/\s+\"(.*)\".*/$1/'`
+
+for l in $libs; do
+ if [ -e "/usr/lib/`dpkg-architecture -qDEB_HOST_MULTIARCH`/$l" ]; then
+ p=/usr/lib/`dpkg-architecture -qDEB_HOST_MULTIARCH`
+ else
+ if [ -e /usr/lib/$l ]; then
+ p=/usr/lib
+ else
+ continue
+ fi
+ fi
+# # sanity check: do the libs match with what we would get
+# # for our libebook version if we followed the .so symlink?
+# l1=`readlink $p/$l`
+# l2_tmp=`echo $l | perl -pe 's/(.*)\.\d+$/$1/'`
+# l2=`readlink $p/$l2_tmp`
+# if [ "$l1" = "$l2" ]; then
+ dep=`dpkg -S $p/$l | cut -d: -f1`
+# fi
+done
+
+if [ -n "$dep" ]; then
+ echo $dep
+else
+ echo "Cannot find libvlc dependency. None of the following libs found:"
+ echo $libs
+ exit 1
+fi
+
--- /dev/null
+#!/bin/sh
+
+## create split package dirs out of LibreOffices gid_* files
+## copied from former ooo-build/libreoffice-build package-ooo
+## (c) 2005 Chris Halls <halls@debian.org>
+## (c) 2005-2011 Rene Engelhard <rene@debian.org>
+
+export OODESTDIR=$DESTDIR
+
+cd $DESTDIR
+
+echo "Copying gid files...."
+rm gid_*
+cp $DESTDIR/../../file-lists/orig/gid_* .
+
+echo "Creating package directories..."
+
+test -d pkg && rm -r pkg || :
+
+# Create package tree (needed by Debian's dpkg)
+# create_package_directory <list_file> <directory_name>
+create_package_directory()
+{
+listfile=$1
+directory="$2"
+perl -nl \
+ -e " if(/^%dir (.*)/)
+ {system('mkdir', '-p', '-m', '755', \"$directory\".\$1);}
+ else
+ {rename('./'.\$_, \"$directory\".\$_);}
+ " \
+ $listfile
+}
+
+# move_wrappers <directory_name> <name> [...]
+move_wrappers()
+{
+directory=$1
+shift
+mkdir -m755 -p "$directory"/usr/bin
+while test -n "$1"; do
+ mv usr/*bin/"$1$BINSUFFIX" "$directory"/usr/bin
+ shift
+done
+}
+
+create_package_directory gid_Module_Root_Ure_Hidden pkg/ure
+create_package_directory gid_Module_Root pkg/libreoffice-common
+create_package_directory gid_Module_Root_Brand pkg/libreoffice-common
+# FIXME: This is added to gid_Module_Root_Brand but doesn't get installed....
+mkdir -p pkg/libreoffice-common/usr/share/mimelnk/application
+mv ./usr/share/mimelnk/application/* \
+ pkg/libreoffice-common/usr/share/mimelnk/application
+# done by dh_installman
+#mkdir -p pkg/libreoffice-common/usr/share/man/man1
+#mv usr/share/man/man1/libreoffice$BINSUFFIX.1.gz \
+# pkg/libreoffice-common/usr/share/man/man1
+#for i in ./usr/share/man/man1/*; do \
+# if [ "$i" = "unopkg.1.gz" -o "$i" = "lofromtemplate.1.gz" \
+# -o "$i" = "loffice.1.gz" ]; then p=common; \
+# else p=`basename $i .1.gz | sed -e s/^lo//`; \
+# fi
+# mkdir -p pkg/libreoffice-$p/usr/share/man/man1
+# mv $i \
+# pkg/libreoffice-$p/usr/share/man/man1
+#done
+for i in ./usr/share/applications/*.desktop; do \
+ if [ "`basename $i`" = "libreoffice-startcenter.desktop" ]; then p=libreoffice-common; \
+ elif [ "`basename $i`" = "libreoffice-xsltfilter.desktop" ]; then p=libreoffice-common; \
+ else p=`basename $i .desktop`; fi
+ mkdir -p pkg/$p/usr/share/applications
+ mv $i \
+ pkg/$p/usr/share/applications
+done
+mkdir -p pkg/libreoffice-common/usr/share
+mv ./usr/share/icons \
+ pkg/libreoffice-common/usr/share
+mv ./usr/share/application-registry \
+ pkg/libreoffice-common/usr/share
+mv ./usr/share/mime* \
+ pkg/libreoffice-common/usr/share
+
+create_package_directory gid_Module_Root_Files_Images pkg/libreoffice-common
+create_package_directory gid_Module_Oo_Linguistic pkg/libreoffice-common
+create_package_directory gid_Module_Optional_Xsltfiltersamples pkg/libreoffice-common
+create_package_directory gid_Module_Filter pkg/libreoffice-common
+create_package_directory gid_Module_Optional_Grfflt pkg/libreoffice-draw
+create_package_directory gid_Module_Prg_Calc_Bin pkg/libreoffice-calc
+create_package_directory gid_Module_Prg_Math_Bin pkg/libreoffice-math
+create_package_directory gid_Module_Prg_Draw_Bin pkg/libreoffice-draw
+create_package_directory gid_Module_Prg_Wrt_Bin pkg/libreoffice-writer
+create_package_directory gid_Module_Prg_Impress_Bin pkg/libreoffice-impress
+create_package_directory gid_Module_Prg_Base_Bin pkg/libreoffice-base
+create_package_directory gid_Module_Brand_Prg_Calc pkg/libreoffice-calc
+create_package_directory gid_Module_Brand_Prg_Math pkg/libreoffice-math
+create_package_directory gid_Module_Brand_Prg_Draw pkg/libreoffice-draw
+create_package_directory gid_Module_Brand_Prg_Wrt pkg/libreoffice-writer
+create_package_directory gid_Module_Brand_Prg_Impress pkg/libreoffice-impress
+create_package_directory gid_Module_Brand_Prg_Base pkg/libreoffice-base
+create_package_directory gid_Module_Pyuno pkg/python3-uno
+create_package_directory gid_Module_Optional_Pyuno_LibreLogo pkg/libreoffice-librelogo
+create_package_directory gid_Module_Script_Provider_For_Python pkg/libreoffice-script-provider-python
+create_package_directory gid_Module_Optional_Gnome pkg/libreoffice-gnome
+create_package_directory gid_Module_Optional_Kde pkg/libreoffice-kde
+create_package_directory gid_Module_Optional_OGLTrans pkg/libreoffice-impress
+create_package_directory gid_Module_Root_SDK pkg/libreoffice-dev
+# WTF? Why is this suddently not installed itself?
+mv usr/lib/libreoffice/sdk/lib \
+ pkg/libreoffice-dev/usr/lib/libreoffice/sdk
+create_package_directory gid_Module_Optional_Extensions_Script_Provider_For_BS pkg/libreoffice-script-provider-bsh
+create_package_directory gid_Module_Optional_Extensions_Script_Provider_For_JS pkg/libreoffice-script-provider-js
+create_package_directory gid_Module_Optional_Extensions_MEDIAWIKI pkg/libreoffice-wiki-publisher
+create_package_directory gid_Module_Optional_Extensions_MINIMIZER pkg/libreoffice-presentation-minimizer
+create_package_directory gid_Module_Optional_Extensions_MySQLConnector pkg/libreoffice-mysql-connector
+create_package_directory gid_Module_Optional_Extensions_NLPSolver pkg/libreoffice-nlpsolver
+create_package_directory gid_Module_Pdfimport pkg/libreoffice-common
+create_package_directory gid_Module_Optional_Extensions_PRESENTER_SCREEN pkg/libreoffice-presenter-console
+create_package_directory gid_Module_Reportbuilder pkg/libreoffice-report-builder
+create_package_directory gid_Module_Optional_PostgresqlSdbc pkg/libreoffice-sdbc-postgresql
+create_package_directory gid_Module_Libreofficekit pkg/libreofficekit-data
+move_wrappers pkg/libreoffice-common soffice unopkg
+move_wrappers pkg/libreoffice-common libreoffice loffice lofromtemplate
+move_wrappers pkg/libreoffice-base lobase
+move_wrappers pkg/libreoffice-writer lowriter loweb
+move_wrappers pkg/libreoffice-calc localc
+move_wrappers pkg/libreoffice-impress loimpress
+move_wrappers pkg/libreoffice-math lomath
+move_wrappers pkg/libreoffice-draw lodraw
+
+for l in `echo $OOO_LANGS_LIST`; do
+ for p in Impress Draw Math Calc Base Writer; do
+ create_package_directory gid_Module_Langpack_${p}_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+ done
+ create_package_directory gid_Module_Langpack_Basis_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+ create_package_directory gid_Module_Langpack_Brand_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+ create_package_directory gid_Module_Langpack_Resource_`echo $l | sed -e s/-/_/g` pkg/libreoffice-l10n-$l
+ if [ -f gid_Module_Helppack_Help_`echo $l | sed -e s/-/_/g` ]; then
+ create_package_directory gid_Module_Helppack_Help_`echo $l | sed -e s/-/_/g` pkg/libreoffice-help-$l
+ fi
+ # some help files are in _Langpack_{Writer,Impress,...}_<lang>
+ # move them from -l10n to -help
+ if [ "$l" = "en-US" ]; then d=en; else d=$l; fi
+ mv pkg/libreoffice-l10n-$l/$OOINSTBASE/help/$d/* \
+ pkg/libreoffice-help-$l/$OOINSTBASE/help/$d && \
+ rmdir pkg/libreoffice-l10n-$l/$OOINSTBASE/help/$d
+done
+
+# Move all libraries and binaries from -common to -core
+if [ ! -d $OODESTDIR/pkg/libreoffice-core/$OOINSTBASE/program ]; then \
+mkdir -p $OODESTDIR/pkg/libreoffice-core/$OOINSTBASE/program; \
+fi &&
+( cd pkg/libreoffice-common/$OOINSTBASE/program
+ find -maxdepth 1 \
+ -regex '\./\(.*\.so.*\|.*\.bin\|pagein.*\|kdefilepicker\|msfontextract\|.*\.rdb\|javaldx\|oosplash\|uri-encode\|xpdfimport\|ui-previewer\)' \
+ -exec mv {} $OODESTDIR/pkg/libreoffice-core/$OOINSTBASE/program \;
+);
+for i in types services; do \
+ if [ ! -d $OODESTDIR/pkg/libreoffice-core/$OOINSTBASE/program/$i ]; then \
+ mkdir -p $OODESTDIR/pkg/libreoffice-core/$OOINSTBASE/program/$i; \
+ fi &&
+ ( cd pkg/libreoffice-common/$OOINSTBASE/program/$i
+ find -maxdepth 1 \
+ -regex '\./\(.*\.rdb\)' \
+ -exec mv {} $OODESTDIR/pkg/libreoffice-core/$OOINSTBASE/program/$i \;
+ ); \
+done
+
+mkdir -p pkg/libreoffice-common/usr/share/bash-completion/completions
+mv usr/share/bash-completion/completions/libreoffice$BINSUFFIX.sh \
+ pkg/libreoffice-common/usr/share/bash-completion/completions/libreoffice$BINSUFFIX
+
+mv .$OOINSTBASE/program/java-set-classpath \
+ pkg/libreoffice-common/$OOINSTBASE/program
+if echo $OOO_LANGS_LIST | grep -q en-US; then
+ for i in forms/resume.ott officorr/project-proposal.ott; do \
+ mkdir -p pkg/libreoffice-common/$OOINSTBASE/share/template/en-US/`dirname $i`; \
+ mv .$OOINSTBASE/share/template/en-US/$i \
+ pkg/libreoffice-common/$OOINSTBASE/share/template/en-US/$i; \
+ done; \
+fi
+
+# Warn for any remaining files
+find . -path './pkg' -prune -o -not -name 'gid_Module_*' -not -type d -exec echo "File not packaged: {}" \;
+
--- /dev/null
+#! /usr/bin/python3
+
+import re, sys, fileinput
+
+def splitlines():
+ fields = ('Build-Depends', 'Build-Conflicts', 'Build-Depends-Indep', 'Depends', 'Replaces',
+ 'Provides', 'Conflicts', 'Recommends', 'Suggests')
+ for line in fileinput.input():
+ line = line[:-1]
+ field = None
+ for f in fields:
+ if line.startswith(f+':'):
+ field = f
+ break
+ if not field:
+ print(line)
+ continue
+ values = [f.strip() for f in line.split(':',1)[1].strip().split(',')]
+ if len(values) > 2:
+ print('%s: %s' % (field, ',\n '.join(values)))
+ else:
+ print('%s: %s' % (field, ', '.join(values)))
+
+def sort_list(unsorted_list):
+ packages = [x for x in unsorted_list if re.match("[a-z0-9]", x)]
+ special = [x for x in unsorted_list if not re.match("[a-z0-9]", x)]
+ return sorted(packages) + sorted(special)
+
+def joinlines():
+ fields = ('Build-Depends', 'Build-Conflicts', 'Build-Depends-Indep', 'Depends', 'Replaces',
+ 'Provides', 'Conflicts', 'Recommends', 'Suggests', 'Breaks')
+ buffer = None
+ for line in fileinput.input():
+ line = line[:-1]
+ if buffer:
+ if line.startswith(' '):
+ buffer = buffer + ' ' + line.strip()
+ continue
+ else:
+ packages = sort_list(set([x.strip() for x in buffer[len(field)+1:].split(",")]))
+ if "" in packages:
+ packages.remove("")
+ length = len(field) + sum([2 + len(package) for package in packages])
+ if length > 80:
+ indentation = " " * (len(field) + 2)
+ packages_with_indention = [indentation + x for x in packages]
+ packages_with_indention = ",\n".join(packages_with_indention)
+ print(field + ": " + packages_with_indention.strip())
+ else:
+ print(field + ": " + ", ".join(packages).strip())
+ buffer = None
+ field = None
+ for f in fields:
+ if line.startswith(f+':'):
+ field = f
+ break
+ if field:
+ buffer = line.strip()
+ continue
+ print(line)
+
+def main():
+ #splitlines()
+ joinlines()
+
+main()
--- /dev/null
+#!/bin/sh
+
+# generate locales that uicheck depend on
+# "stolen" from gcc
+
+LOCPATH=`pwd`/debian/locales
+export LOCPATH
+
+[ -d $LOCPATH ] || mkdir -p $LOCPATH
+
+[ -n "$USE_CPUS" ] || USE_CPUS=1
+
+umask 022
+
+echo "Generating locales..."
+xargs -L 1 -P $USE_CPUS -I{} \
+ sh -c '
+ set {}; locale=$1; charset=$2
+ case $locale in \#*) exit;; esac
+ [ -n "$locale" -a -n "$charset" ] || exit
+ echo " `echo $locale | sed \"s/\([^.\@]*\).*/\1/\"`.$charset`echo $locale | sed \"s/\([^\@]*\)\(\@.*\)*/\2/\"`..."
+ if [ -f $LOCPATH/$locale ]; then
+ input=$locale
+ else
+ input=`echo $locale | sed "s/\([^.]*\)[^@]*\(.*\)/\1\2/"`
+ fi
+ localedef -i $input -c -f $charset $LOCPATH/$locale #-A /etc/locale.alias
+ ' <<EOF
+en_US.UTF-8 UTF-8
+EOF
+
+echo "Generation complete."
--- /dev/null
+#!/bin/sh
+
+set -x
+
+# mk-origtargz --package libreoffice --version 6.0.1 --compression xz --directory .. --copyright-file debian/copyright ../libreoffice-6.0.1.1.tar.xz
+# mk-origtargz --package libreoffice --version 6.0.1 --component translations --compression xz --directory .. --copyright-file debian/copyright ../libreoffice-translations-6.0.1.1.tar.xz
+
+pwd=`pwd`
+tmp=`mktemp -q -d`
+
+if echo "$5" | grep -q component && [ -n "$6" ]; then
+ echo "Extracting upstream $6 tarball..."
+ cd ${tmp}
+ tar xfvJ ${pwd}/${13}
+ cd ${2}-`basename ${13} .tar.xz | cut -d- -f3`
+ echo "Creating ${10}/${2}_${4}.orig-${6}.tar.${8} from $6..."
+ tar cfvJ ${pwd}/${10}/${2}_${4}.orig-${6}.tar.${8} $6
+ cd ${pwd}
+ rm -rf $tmp/*
+else
+ echo "Symlinking ${8}/${2}_${4}.orig.tar.${6} to ${11}"
+ ln -sf `basename ${11}` ${8}/${2}_${4}.orig.tar.${6}
+fi
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+# Copyright (C) 1996 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+if
+test -r $2
+then
+if
+cmp $1 $2 > /dev/null
+then
+echo $2 is unchanged
+rm -f $1
+else
+mv -f $1 $2
+fi
+else
+mv -f $1 $2
+fi
--- /dev/null
+#!/bin/sh
+
+set -e
+
+# Quick and dirty script to stat the LO translations/ pos wrt % translated
+# FIXME: maybe use pocount from translate-toolkit
+
+# Author: Rene Engelhard <rene@debian.org>
+# (C) 2017 Software in the Public Interest, Inc.
+
+cd translations/source
+
+for l in `ls -1`; do
+ # 23:36 <@cloph> no - but you can do a brute-force method of just counting msgid and comparing that with »msgstr ""« matches.
+ # 23:37 <@cloph> While that ignores multiline strings, there aren't too many and should work as a rough estimate
+ msgid_count=$(grep msgid `find $l -name "*.po"` | wc -l)
+ msgstr_count=$(grep msgstr `find $l -name "*.po"` | wc -l)
+ empty_msgstr_count=$(grep msgstr\ \"\" `find $l -name "*.po"` | wc -l)
+ p=$((100*$empty_msgstr_count/$msgid_count))
+ echo "$l: $msgid_count strings, $(($msgid_count-$empty_msgstr_count))/$msgid_count translated; $empty_msgstr_count/$msgid_count untranslated"
+ if test $msgid_count -lt 50000; then
+ echo "$l: no help translations"
+ fi
+ echo "$l: $((100-$p))% translated, $p% untranslated"
+
+ if test $p -lt 20; then
+ langs="$langs $l"
+ fi
+done
+
+echo "languages over 80% translated:"
+echo $langs
--- /dev/null
+validate_extensions() {
+ INSTDIR=`mktemp -d`
+ if HOME=$INSTDIR /usr/lib/libreoffice/program/unopkg list --bundled >/dev/null 2>/dev/null; then
+ HOME=$INSTDIR /usr/lib/libreoffice/program/unopkg validate -v --bundled
+ fi
+}
+
+make_lo_sync_extensions() {
+ touch /usr/lib/libreoffice/share/extensions
+}
--- /dev/null
+update_lool_systemplate() {
+ echo -n "Updating LibreOffice Online systemplate... "
+ su lool --shell=/bin/sh -c 'loolwsd-systemplate-setup /var/lib/lool/systemplate /usr/lib/libreoffice >/dev/null 2>&1'
+ echo "done."
+}
--- /dev/null
+libicudata 54
+libicui18n 54
+libicule 54
+libicuuc 54
+libicutu 54
--- /dev/null
+libc 0.1 libc0.1 (>= 2.10.2-7)
--- /dev/null
+libcmis-0.5 5 libcmis-0.5-5v5 (>= 0.5.1+git20160603)
+libcmis-c-0.5 5 libcmis-0.5-5v5 (>= 0.5.1+git20160603)
--- /dev/null
+libetonyek-0.1-lo 1
--- /dev/null
+liblangtag-lo 1
--- /dev/null
+libmwaw-0.3-lo 3
--- /dev/null
+libodfgen-0.1-lo 1
--- /dev/null
+librevenge-0.0-lo 0
--- /dev/null
+libstaroffice-0.0-lo 0
--- /dev/null
+libvisio-0.1 1
--- /dev/null
+libwpd-0.10-lo 10
--- /dev/null
+libwpg-0.3-lo 3
--- /dev/null
+libwps-0.4-lo 4
--- /dev/null
+liborcus-0.14 0
+liborcus-parser-0.14 0
--- /dev/null
+# configuration file to set up some environment variables for LibreOffice
+
+# File locking; possible values are:
+# - yes: enable file locking unconditionally
+# - no: disable file locking
+# - auto: enable file locking, when the document is found on a nfs share
+# If the environment variable SAL_ENABLE_FILE_LOCKING is set,
+# the setting if ENABLE_FILE_LOCKING has no effect.
+
+FILE_LOCKING=auto
+
+# OpenGL support; may cause trouble with the restricted nvidia and fglrx
+# drivers; possible values are:
+# - yes: enable OpenGL support unconditionally
+# - no: disable OpenGL support.
+# - auto: only enable OpenGL support, if not running with the restricted
+# nvidia and fglrx drivers.
+# If the environment variable SAL_NOOPENGL is set,
+# the setting if OPENGL_SUPPORT has no effect.
+
+OPENGL_SUPPORT=no
--- /dev/null
+3.0 (quilt)
--- /dev/null
+debian/templates/debian-presentation.otp
+debian/templates/debian-presentation-background.xcf
+desktop/test/deployment/update/platform/linux_sparc64.oxt
+tarballs/798b2ffdc8bcfe7bca2cf92b62caf685-rhino1_5R5.zip
+tarballs/35c94d2df8893241173de1d16b6034c0-swingExSrc.zip
+tarballs/a7983f859eafb2677d7ff386a023bc40-xsltml_2.1.2.zip
+tarballs/pdfium-3426.tar.bz2
--- /dev/null
+# This one *has* a (detached) license paragraph....
+libreoffice source: missing-license-paragraph-in-dep5-copyright mpl-2.0 (paragraph at line 37)
+libreoffice source: source-is-missing helpcontent2/help3xsl/fuse.js line length is 564 characters (>512)
--- /dev/null
+[Desktop Entry]
+Name=LibreOffice @APP@ ...
+Comment=Enter LibreOffice @APP@ filename:
+Comment[de]=Name der LibreOffice @APP@-Datei eingeben:
+Type=Link
+URL=.source/soffice.@EXT@
+Icon=libreoffice-oasis-@TYPE@
+
--- /dev/null
+Tests: uno
+Depends: @builddeps@, ure
+Restrictions: allow-stderr, rw-build-tree
+
+Tests: smoketest
+Depends: @builddeps@, libreoffice-dev, libreoffice, libreoffice-sdbc-hsqldb, libreoffice-sdbc-firebird, libreoffice-smoketest-data
+Restrictions: allow-stderr, rw-build-tree, skippable
+
+Tests: pyuno-import, uno-import
+Depends: python3, python3-uno
+Restrictions: superficial
+
+# this is already done by smoketest upstream, but fails when doing it against
+# the installed LO. works standalone, though, so it's patched out of the
+# smoketest. Do it here separately.
+Tests: test-extension
+Depends: libreoffice-core, libreoffice-common, libreoffice-java-common, libreoffice-smoketest-data, default-jdk
+Restrictions: superficial
+
+Tests: test-extension-shared
+Depends: libreoffice-core, libreoffice-common, libreoffice-java-common, libreoffice-smoketest-data, default-jdk
+Restrictions: needs-root, superficial
+
+Tests: uicheck
+Depends: @builddeps@, libreoffice, python3-uno, libreoffice-l10n-he, libreoffice-l10n-ja
+Restrictions: allow-stderr
+
+Tests: junit
+Depends: @builddeps@, libreoffice, libreoffice-subsequentcheckbase, libreoffice-sdbc-hsqldb, libreoffice-sdbc-firebird
+Restrictions: allow-stderr
+
+Test-Command: export SYSTEM_UCPP=TRUE; export DOXYGEN=`which doxygen`; export ENABLE_JAVA=TRUE; export JDK=sun; export JAVADOC=/usr/lib/jvm/default-java/bin/javadoc; perl odk/util/check.pl /usr/lib/libreoffice/sdk
+Depends: libreoffice-dev, libreoffice-dev-doc
+Restrictions: superficial
+
+Tests: odk-build-examples
+Depends: @builddeps@, libreoffice-dev, libreoffice-dev-doc, libreoffice-java-common, python3-uno, libreoffice-officebean
+Restrictions: allow-stderr
+
+# inspired by https://salsa.debian.org/apparmor-team/apparmor-profiles-extra/commit/7fbcc4788d0e94764eeeff2f080796601241f986
+Test-Command: for i in /etc/apparmor.d/usr.lib.libreoffice.program.*; do /sbin/apparmor_parser --add --skip-cache --skip-kernel-load $i; done
+Depends: libreoffice-common, apparmor
+Restrictions: allow-stderr, superficial
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run junit base tests against an installed version of LibreOffice
+# (C) 2013 Canonical Ltd.
+# (c) 2015-2017 Software in the Public Interest, Inc.
+# Authors: Bjoern Michaelsen <bjoern.michaelsen@canonical.com>
+# Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/java-subsequentcheck-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to only build Java-based unittests against an existing installation ======"
+patch -p1 < ./debian/tests/patches/java-subsequentcheck-standalone.diff
+
+echo
+echo "====== Generating configuration ======="
+rm -f config_host.mk
+./debian/rules config_host.mk enable_report_builder=no
+sed -i 's/export OOO_JUNIT_JAR=.*/export OOO_JUNIT_JAR=\/usr\/share\/java\/junit4.jar/' config_host.mk
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting subsequentcheck with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+eval `grep PLATFORMID config_host.mk`
+
+export PARALLELISM=$CHECK_PARALLELISM
+make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ bridges_SELECTED_BRIDGE=gcc3_$PLATFORMID \
+ subsequentcheck verbose=t
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run the odk/build-examples check against an installed
+# version of the LibreOffice SDK
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+
+function unapply() {
+ cd $SRCDIR
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/odk-build-examples-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to build the odk build-examples test against an existing installation ======"
+patch -p1 < ./debian/tests/patches/odk-build-examples-standalone.diff
+
+echo
+echo "====== Generating configuration ======="
+rm -f config_host.mk
+./debian/rules config_host.mk
+
+echo
+echo "====== Starting build with ${CHECK_PARALLELISM} job against /usr/lib/libreoffice/sdk ======"
+
+cd $SRCDIR/odk
+
+export PARALLELISM=$CHECK_PARALLELISM
+make -rk \
+ CustomTarget_odk/build-examples \
+ CustomTarget_odk/build-examples_java verbose=t
+
+unapply
+
--- /dev/null
+diff -urN smoketest-old/data/Test_DB.xml smoketest/data/Test_DB.xml
+--- a/smoketest-old/data/Basic/Standard/Test_DB.xml 2011-12-20 16:05:52.000000000 +0000
++++ b/smoketest/data/Basic/Standard/Test_DB.xml 2011-12-29 23:09:08.000000000 +0000
+@@ -30,9 +30,6 @@
+
+ const cMessageDatabaseService = "Database Service"
+ const cMessageDatabaseOpen = "Open Database"
+-const cMessageDatabaseInsert = "Insert record into Database"
+-const cMessageDatabaseDelete = "Delete record from Database"
+-const cMessageDatabaseSeek = "Read other record from Database"
+ const cMessageDatabaseClose = "Close Database"
+
+ Sub TestDB
+@@ -81,48 +78,6 @@
+ LogTestResult( "Database "+ cMessageDatabaseService, TRUE )
+ End If
+
+- gCurrentTestCase = cDBInsert
+- sCurrentMessage = cMessageDatabaseInsert
+-
+- oRowSet.ActiveConnection = oDBConnection
+-
+- oRowSet.CommandType = com.sun.star.sdb.CommandType.COMMAND
+- oRowSet.Command = "SELECT * FROM " + sTable
+- oRowSet.execute()
+-
+- oRowSet.moveToInsertRow
+- oRowSet.updateString(5, sTestString)
+-
+- oRowSet.insertRow()
+- nRowCount=oRowSet.RowCount
+-
+- oRowSet.moveToCurrentRow()
+-
+- bResult = (oRowSet.getString(5) = sTestString)
+- LogTestResult( "Database "+ cMessageDatabaseInsert, bResult )
+-
+- 'delete only if insert passed
+-
+- if (bResult) Then
+- gCurrentTestCase = cDBDelete
+- sCurrentMessage = cMessageDatabaseDelete
+- oRowSet.deleteRow()
+- bResult = (nRowCount - oRowSet.RowCount = 0)
+- if ( bResult ) Then
+- oRowSet.next()
+- bResult = (nRowCount - oRowSet.RowCount = 1)
+- End If
+- LogTestResult( "Database "+ cMessageDatabaseDelete, bResult )
+- End If
+-
+- ' read other record
+-
+- gCurrentTestCase = cDBSeek
+- sCurrentMessage = cMessageDatabaseSeek
+- oRowSet.first()
+- bResult = not (oRowSet.getString(5) = sTestString)
+- LogTestResult( "Database "+ cMessageDatabaseSeek, bResult )
+-
+ gCurrentTestCase = cDBClose
+ sCurrentMessage = cMessageDatabaseClose
+ oDBConnection.Dispose()
+--- a/dbaccess/Module_dbaccess.mk-old 2012-04-27 23:27:39.194936746 +0200
++++ b/dbaccess/Module_dbaccess.mk 2012-04-27 23:27:47.102975960 +0200
+@@ -33,49 +33,6 @@
+ ))
+
+ ifneq ($(OS),IOS)
+-ifeq ($(ENABLE_FIREBIRD_SDBC),TRUE)
+-$(eval $(call gb_Module_add_check_targets,dbaccess,\
+- CppunitTest_dbaccess_firebird_test \
+-))
+-endif
+-
+-$(eval $(call gb_Module_add_check_targets,dbaccess,\
+- CppunitTest_dbaccess_dialog_save \
+- CppunitTest_dbaccess_empty_stdlib_save \
+- CppunitTest_dbaccess_nolib_save \
+- CppunitTest_dbaccess_macros_test \
+-))
+-
+-ifeq ($(ENABLE_JAVA),TRUE)
+-$(eval $(call gb_Module_add_check_targets,dbaccess,\
+- CppunitTest_dbaccess_hsqldb_test \
+- CppunitTest_dbaccess_RowSetClones \
+-))
+-endif
+-
+-# This runs a suite of performance tests on embedded firebird and HSQLDB.
+-# Instructions on running the test can be found in qa/unit/embeddedb_performancetest
+-ifeq ($(ENABLE_FIREBIRD_SDBC),TRUE)
+-ifeq ($(ENABLE_JAVA),TRUE)
+-$(eval $(call gb_Module_add_check_targets,dbaccess,\
+- CppunitTest_dbaccess_embeddeddb_performancetest \
+-))
+-endif
+-endif
+-
+-$(eval $(call gb_Module_add_subsequentcheck_targets,dbaccess,\
+- JunitTest_dbaccess_complex \
+- JunitTest_dbaccess_unoapi \
+-))
+-
+-ifneq ($(DISABLE_PYTHON),TRUE)
+-ifneq ($(ENABLE_JAVA),)
+-$(eval $(call gb_Module_add_subsequentcheck_targets,dbaccess,\
+- PythonTest_dbaccess_python \
+-))
+-endif
+-endif
+-
+ # screenshots
+ $(eval $(call gb_Module_add_screenshot_targets,dbaccess,\
+ CppunitTest_dbaccess_dialogs_test \
--- /dev/null
+From fef2f669c1e861c685d22c18319514cec9f9f8c3 Mon Sep 17 00:00:00 2001
+From: Bjoern Michaelsen <bjoern.michaelsen@canonical.com>
+Date: Wed, 28 Jan 2015 12:11:16 +0100
+Subject: [PATCH] run subsequentcheck standalone against installed version as
+ integration test
+Last-Update: 2017-05-17
+
+Forwarded: partially, where there is generic use for it
+---
+ jurt/Module_jurt.mk | 2 +-
+ postprocess/Module_postprocess.mk | 4 ++--
+ solenv/gbuild/JavaClassSet.mk | 2 +-
+ solenv/gbuild/JunitTest.mk | 2 +-
+ solenv/gbuild/Module.mk | 3 +++
+ solenv/gbuild/extensions/post_SkipBuild.mk | 18 ++++++++++++++++++
+ solenv/gbuild/platform/unxgcc.mk | 1 +
+ 7 files changed, 27 insertions(+), 5 deletions(-)
+ create mode 100644 solenv/gbuild/extensions/post_SkipBuild.mk
+
+--- a/jurt/Module_jurt.mk
++++ b/jurt/Module_jurt.mk
+@@ -22,7 +22,7 @@ $(eval $(call gb_Module_add_targets,jurt
+ ))
+ endif
+
+-$(eval $(call gb_Module_add_subsequentcheck_targets,jurt,\
++#$(eval $(call gb_Module_add_subsequentcheck_targets,jurt,\
+ CustomTarget_test_urp \
+ InternalUnoApi_test_urp \
+ JunitTest_bridgefactory \
+--- a/postprocess/Module_postprocess.mk
++++ b/postprocess/Module_postprocess.mk
+@@ -12,13 +12,13 @@ $(eval $(call gb_Module_Module,postproce
+ # UGLY: postprocess_XCDS variable from CustomTarget_registry
+ # is reused in Package_registry!
+
+-$(eval $(call gb_Module_add_targets,postprocess,\
++#$(eval $(call gb_Module_add_targets,postprocess,\
+ CustomTarget_images \
+ CustomTarget_registry \
+ Package_images \
+ Rdb_services \
+ ))
+-$(eval $(call gb_Module_add_l10n_targets,postprocess,\
++#$(eval $(call gb_Module_add_l10n_targets,postprocess,\
+ Package_registry \
+ ))
+
+--- a/solenv/gbuild/JavaClassSet.mk
++++ b/solenv/gbuild/JavaClassSet.mk
+@@ -39,7 +39,7 @@ $(call gb_Helper_abbreviate_dirs,\
+ $(filter-out $(JARDEPS),$(4))) && \
+ $(if $(3),$(gb_JavaClassSet_JAVACCOMMAND) \
+ $(gb_JavaClassSet_JAVACDEBUG) \
+- -classpath "$(T_CP)$(gb_CLASSPATHSEP)$(call gb_JavaClassSet_get_classdir,$(2))" \
++ -classpath "$(T_CP)$(gb_CLASSPATHSEP)$(call gb_JavaClassSet_get_classdir,$(2)):$(subst $(gb_SPACE),:,$(wildcard /usr/lib/ure/share/java/*.jar)):$(subst $(gb_SPACE),:,$(wildcard /usr/lib/libreoffice/program/classes/*.jar))" \
+ -d $(call gb_JavaClassSet_get_classdir,$(2)) \
+ @$$RESPONSEFILE &&) \
+ rm -f $$RESPONSEFILE &&) \
+--- a/solenv/gbuild/JunitTest.mk
++++ b/solenv/gbuild/JunitTest.mk
+@@ -55,7 +55,7 @@ $(call gb_JunitTest_get_target,%) :
+ $(CLEAN_CMD)
+
+ define gb_JunitTest_JunitTest
+-$(call gb_JunitTest_get_target,$(1)) : T_CP := $(call gb_JavaClassSet_get_classdir,$(call gb_JunitTest_get_classsetname,$(1)))$$(gb_CLASSPATHSEP)$(OOO_JUNIT_JAR)$(if $(HAMCREST_JAR),$$(gb_CLASSPATHSEP)$(HAMCREST_JAR))$$(gb_CLASSPATHSEP)$(INSTROOT)/$(LIBO_URE_LIB_FOLDER)
++$(call gb_JunitTest_get_target,$(1)) : T_CP := $(call gb_JavaClassSet_get_classdir,$(call gb_JunitTest_get_classsetname,$(1)))$$(gb_CLASSPATHSEP)$(OOO_JUNIT_JAR)$(if $(HAMCREST_JAR),$$(gb_CLASSPATHSEP)$(HAMCREST_JAR))$$(gb_CLASSPATHSEP)$(OUTDIR)/lib:$(subst $(gb_SPACE),:,$(wildcard /usr/lib/ure/share/java/*.jar)):$(subst $(gb_SPACE),:,$(wildcard /usr/lib/libreoffice/program/classes/*.jar))
+ $(call gb_JunitTest_get_target,$(1)) : CLASSES :=
+ $(eval $(call gb_JunitTest_JunitTest_platform,$(1)))
+
+--- a/solenv/gbuild/Module.mk
++++ b/solenv/gbuild/Module.mk
+@@ -336,15 +336,16 @@ endef
+ # has order dependency on AllModulesButInstsetNative to be able to run
+ # subsequentcheck in the same make process on "make check"
+ define gb_Module_add_subsequentcheck_target
++ifeq (,$(filter-out JavaClassSet% JunitTest%,$(2)))
+ $(call gb_Module__read_targetfile,$(1),$(2),subsequentcheck target)
+
+ $(call gb_Module_get_subsequentcheck_target,$(1)) : $$(gb_Module_CURRENTTARGET)
+ $$(gb_Module_CURRENTTARGET) :| \
+- $(call gb_Postprocess_get_target,AllModulesButInstsetNative) \
+- $(call gb_Package_get_target,instsetoo_native_setup) \
+- $(call gb_Package_get_target,instsetoo_native_setup_ure)
++ $(call gb_Postprocess_get_target,AllModulesButInstsetNative)
+ $(call gb_Module_get_clean_target,$(1)) : $$(gb_Module_CURRENTCLEANTARGET)
+
++endif
++
+ endef
+
+ define gb_Module_add_stagingcheck_target
+--- /dev/null
++++ b/solenv/gbuild/extensions/post_SkipBuild.mk
+@@ -0,0 +1,18 @@
++# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
++#
++# This file is part of the LibreOffice project.
++#
++# This Source Code Form is subject to the terms of the Mozilla Public
++# License, v. 2.0. If a copy of the MPL was not distributed with this
++# file, You can obtain one at http://mozilla.org/MPL/2.0/.
++#
++
++# we dont want to bother with these for integration tests
++gb_Module_add_target =
++gb_Module_add_l10n_target =
++gb_Module_add_check_target =
++gb_Module_add_slowcheck_target =
++gb_JavaClassSet_use_jar =
++gb_JunitTest_use_jar =
++
++# vim: set noet sw=4 ts=4:
+--- a/solenv/gbuild/platform/unxgcc.mk
++++ b/solenv/gbuild/platform/unxgcc.mk
+@@ -289,6 +289,7 @@ $(call gb_JunitTest_get_target,$(1)) : D
+ -Dorg.openoffice.test.arg.workdir=$(call gb_JunitTest_get_userdir,$(1)) \
+ -Dorg.openoffice.test.arg.postprocesscommand=$(SRCDIR)/solenv/bin/gdb-core-bt.sh \
+ -Dorg.openoffice.test.arg.soffice="$(gb_JunitTest_SOFFICEARG)" \
++ -Djava.library.path=/usr/lib/ure/lib \
+
+ endef
+
--- /dev/null
+diff --git a/odk/build-examples_common.mk b/odk/build-examples_common.mk
+index 931d6eea856e..2749b6930079 100644
+--- a/odk/build-examples_common.mk
++++ b/odk/build-examples_common.mk
+@@ -29,7 +29,7 @@ endif
+ && export \
+ UserInstallation=$(call gb_Helper_make_url,$(call gb_CustomTarget_get_workdir,$(1))/user) \
+ $(foreach my_dir,$(2), \
+- && (cd $(INSTDIR)/$(SDKDIRNAME)/examples/$(my_dir) \
++ && (cd /usr/lib/libreoffice/sdk/examples/$(my_dir) \
+ && printf 'yes\n' | LC_ALL=C make \
+ $(if $(filter MACOSX,$(OS)), SHELL=$(ODK_BUILD_SHELL), )))) \
+ >$(call gb_CustomTarget_get_workdir,$(1))/log 2>&1 \
+@@ -43,17 +43,17 @@ endif
+ endif
+
+ $(call gb_CustomTarget_get_workdir,$(1))/setsdkenv: \
+- $(SRCDIR)/odk/config/setsdkenv_unix.sh.in \
++ /usr/lib/libreoffice/sdk//setsdkenv_unix.sh.in \
+ $(BUILDDIR)/config_$(gb_Side).mk | \
+ $(call gb_CustomTarget_get_workdir,$(1))/.dir
+ $$(call gb_Output_announce,$(subst $(WORKDIR)/,,$(1)),$(true),SED,1)
+ sed -e 's!@OO_SDK_NAME@!sdk!' \
+- -e 's!@OO_SDK_HOME@!$(INSTDIR)/$(SDKDIRNAME)!' \
+- -e 's!@OFFICE_HOME@!$(INSTROOTBASE)!' -e 's!@OO_SDK_MAKE_HOME@!!' \
++ -e 's!@OO_SDK_HOME@!/usr/lib/libreoffice/sdk!' \
++ -e 's!@OFFICE_HOME@!/usr/lib/libreoffice!' -e 's!@OO_SDK_MAKE_HOME@!!' \
+ -e 's!@OO_SDK_ZIP_HOME@!!' -e 's!@OO_SDK_CAT_HOME@!!' \
+ -e 's!@OO_SDK_SED_HOME@!!' -e 's!@OO_SDK_CPP_HOME@!!' \
+ -e 's!@OO_SDK_JAVA_HOME@!$(JAVA_HOME)!' \
+- -e 's!@OO_SDK_OUTPUT_DIR@!$(call gb_CustomTarget_get_workdir,$(1))/out!' \
++ -e 's!@OO_SDK_OUTPUT_DIR@!$(shell mktemp -q -d)/out!' \
+ -e 's!@SDK_AUTO_DEPLOYMENT@!YES!' $$< > $$@
+
+ .PHONY: $(call gb_CustomTarget_get_target,$(1))
+diff --git a/solenv/gbuild/Module.mk b/solenv/gbuild/Module.mk
+index 4073dcfd9bf5..68c17ce0d1ed 100644
+--- a/solenv/gbuild/Module.mk
++++ b/solenv/gbuild/Module.mk
+@@ -339,10 +339,6 @@ define gb_Module_add_subsequentcheck_target
+ $(call gb_Module__read_targetfile,$(1),$(2),subsequentcheck target)
+
+ $(call gb_Module_get_subsequentcheck_target,$(1)) : $$(gb_Module_CURRENTTARGET)
+-$$(gb_Module_CURRENTTARGET) :| \
+- $(call gb_Postprocess_get_target,AllModulesButInstsetNative) \
+- $(call gb_Package_get_target,instsetoo_native_setup) \
+- $(call gb_Package_get_target,instsetoo_native_setup_ure)
+ $(call gb_Module_get_clean_target,$(1)) : $$(gb_Module_CURRENTCLEANTARGET)
+
+ endef
--- /dev/null
+--- smoketest/data/Basic/Standard/Test_Ext.xml 2012-02-01 13:56:49.000000000 +0100
++++ smoketest/data/Basic/Standard/Test_Ext.xml 2012-02-20 20:15:23.000000000 +0100
+@@ -28,10 +28,6 @@
+ <!DOCTYPE script:module PUBLIC "-//OpenOffice.org//DTD OfficeDocument 1.0//EN" "module.dtd">
+ <script:module xmlns:script="http://openoffice.org/2000/script" script:name="Test_Ext" script:language="StarBasic">REM ***** BASIC *****
+
+-const cMessageExtensionService = "Extension Service"
+-const cMessageExtensionInstall = "Install Extension"
+-const cMessageExtensionUninstall = "Uninstall Extension"
+-
+ Sub TestExtensions
+ Dim oTestExtension as Object, obj_null as Object
+ Dim sCurrentMessage as String
+@@ -37,9 +37,6 @@
+ Dim sCurrentMessage as String
+ Dim bResult as Boolean
+ Dim sImplementationNameString as String
+- sImplementationNameString = cUnoSmoketestTestExtension + "$_TestExtension"
+-
+- On Local Error GoTo EXTERROR
+
+ gCurrentTestCase = cLogfileFailed
+ LocalTestLog% = OpenLogDat (GetLogFileName(gCurrentDocTest))
+@@ -35,74 +35,5 @@
+ gCurrentTestCase = cLogfileFailed
+ LocalTestLog% = OpenLogDat (GetLogFileName(gCurrentDocTest))
+
+- sCurrentMessage = "SmokeTestCommandEnvironment (implemented in Java)"
+- gCurrentTestCase = cEXTService
+-
+- 'Create an implementation of com.sun.star.ucb.XCommandEnvironment which is needed for
+- 'adding the extension. The implementation is in
+- 'smoketest/org/libreoffice/smoketest/SmoketestCommandEnvironment.java and the code is in smoketest.jar
+- cmdEnv = createUnoService(cUnoSmoketestCommandEnvironment)
+-
+- 'Create the component context and then get the singleton ExtensionManager
+- 'A singleton cannot be created with createUnoService
+- sCurrentMessage = cMessageExtensionService
+- ctx = getDefaultContext
+- ext_mgr = ctx.getValueByName("/singletons/" + cExtensionManager)
+-
+- LogTestResult( "Extension "+ cMessageExtensionService, not IsNull (ext_mgr) )
+- if (IsNull(ext_mgr)) then
+- Close #LocalTestLog%
+- LocalTestLog = 0
+- Exit Sub
+- End If
+-
+- sCurrentMessage = cMessageExtensionInstall
+- gCurrentTestCase = cEXTInstall
+-
+- 'Add the extension. We must provide a file URL here.
+- 'By passing "user" we determine that the actions we perform on
+- 'XExtensionManager only affect the user installation. To modify the share installation one would pass "share".
+-
+- Dim props() as Object
+- ext_mgr.addExtension(sExtensionURL, props, "user", obj_null, cmdEnv)
+-
+- 'Check if the extension has been added by creating a service which is contained in the extension.
+- oTestExtension = createUnoService(cUnoSmoketestTestExtension)
+- bResult = (oTestExtension.getImplementationName = sImplementationNameString)
+- LogTestResult( "Extension "+ cMessageExtensionInstall, bResult )
+- if (not bResult) then
+- Close #LocalTestLog%
+- LocalTestLog = 0
+- Exit Sub
+- End If
+-
+- sCurrentMessage = cMessageExtensionUninstall
+- gCurrentTestCase = cEXTUninstall
+-
+- 'Remove the package
+- ext_mgr.removeExtension("org.libreoffice.smoketest.TestExtension", cExtensionFileName, "user",obj_null, cmdEnv)
+-
+- 'Try to create the service which is contained in the now removed extension.
+- oTestExtension = createUnoService(cUnoSmoketestTestExtension)
+-
+- 'The service must not be available anymore. Therefore isNull must return true.
+- LogTestResult( "Extension "+ cMessageExtensionUninstall, IsNull (oTestExtension) )
+-
+- Print #LocalTestLog, "---"
+- Close #LocalTestLog%
+- LocalTestLog = 0
+- Exit Sub ' Without error
+-
+- EXTERROR:
+- If ( gCurrentTestCase = cLogfileFailed ) then
+- LogTestResult( " ", False )
+- Exit Sub
+- else
+- LogTestResult( "Extension "+ sCurrentMessage, False )
+- Close #LocalTestLog%
+- LocalTestLog = 0
+- End If
+- Exit Sub ' With error
+-
+ End Sub
+ </script:module>
--- /dev/null
+diff --git a/smoketest/CppunitTest_smoketest.mk b/smoketest/CppunitTest_smoketest.mk
+index f7d64cae562f..9d47776ffb4b 100644
+--- a/smoketest/CppunitTest_smoketest.mk
++++ b/smoketest/CppunitTest_smoketest.mk
+@@ -34,10 +34,10 @@ userinstallation=$(WORKDIR)/CustomTarget/smoketest
+ endif
+
+ $(eval $(call gb_CppunitTest_add_arguments,smoketest,\
+- -env:arg-soffice=$(gb_JunitTest_SOFFICEARG) \
++ -env:arg-soffice=$(OOO_TEST_SOFFICE) \
+ -env:arg-user=$(userinstallation) \
+ -env:arg-env=$(gb_Helper_LIBRARY_PATH_VAR)"$$$${$(gb_Helper_LIBRARY_PATH_VAR)+=$$$$$(gb_Helper_LIBRARY_PATH_VAR)}" \
+- -env:arg-testarg.smoketest.doc=$(WORKDIR)/Zip/smoketestdoc.sxw \
++ -env:arg-testarg.smoketest.doc=/usr/share/libreoffice/smoketestdoc.sxw \
+ ))
+
+ $(call gb_CppunitTest_get_target,smoketest): \
+diff --git a/solenv/gbuild/Module.mk b/solenv/gbuild/Module.mk
+index 0d87ccc55379..41c6564d3d7e 100644
+--- a/solenv/gbuild/Module.mk
++++ b/solenv/gbuild/Module.mk
+@@ -338,10 +338,6 @@ define gb_Module_add_subsequentcheck_target
+ $(call gb_Module__read_targetfile,$(1),$(2),subsequentcheck target)
+
+ $(call gb_Module_get_subsequentcheck_target,$(1)) : $$(gb_Module_CURRENTTARGET)
+-$$(gb_Module_CURRENTTARGET) :| \
+- $(call gb_Postprocess_get_target,AllModulesButInstsetNative) \
+- $(call gb_Package_get_target,instsetoo_native_setup) \
+- $(call gb_Package_get_target,instsetoo_native_setup_ure)
+ $(call gb_Module_get_clean_target,$(1)) : $$(gb_Module_CURRENTCLEANTARGET)
+
+ endef
--- /dev/null
+diff --git a/testtools/CustomTarget_bridgetest.mk b/testtools/CustomTarget_bridgetest.mk
+index d090146ec411..1cb4d30dcc2a 100644
+--- a/testtools/CustomTarget_bridgetest.mk
++++ b/testtools/CustomTarget_bridgetest.mk
+@@ -28,7 +28,7 @@ $(testtools_BRIDGEDIR)/bridgetest_server$(testtools_BATCHSUFFIX) :| $(testtools_
+ $(call gb_Output_announce,$(subst $(WORKDIR)/,,$@),$(true),ECH,1)
+ $(call gb_Helper_abbreviate_dirs,\
+ echo \
+- "$(call gb_Executable_get_target_for_build,uno)" \
++ "/usr/lib/libreoffice/program/uno" \
+ "-s com.sun.star.test.bridge.CppTestObject" \
+ "-u 'uno:socket$(COMMA)host=127.0.0.1$(COMMA)port=2002;urp;test'" \
+ "--singleaccept" \
+@@ -59,7 +59,7 @@ $(testtools_BRIDGEDIR)/bridgetest_inprocess_java$(testtools_BATCHSUFFIX) :| $(te
+ $(call gb_Output_announce,$(subst $(WORKDIR)/,,$@),$(true),ECH,1)
+ $(call gb_Helper_abbreviate_dirs,\
+ echo "JAVA_HOME=$(JAVA_HOME)" \
+- "$(call gb_Executable_get_target_for_build,uno)" \
++ "/usr/lib/libreoffice/program/uno" \
+ "-s com.sun.star.test.bridge.BridgeTest" \
+ "-env:LO_BUILD_LIB_DIR=$(call gb_Helper_make_url,$(gb_Library_WORKDIR_FOR_BUILD))" \
+ "-env:URE_MORE_SERVICES=$(call gb_Helper_make_url,$(call gb_Rdb_get_target,uno_services))" \
+@@ -72,7 +72,7 @@ $(testtools_BRIDGEDIR)/bridgetest_client$(testtools_BATCHSUFFIX) :| $(testtools_
+ $(call gb_Output_announce,$(subst $(WORKDIR)/,,$@),$(true),ECH,1)
+ $(call gb_Helper_abbreviate_dirs,\
+ echo \
+- "$(call gb_Executable_get_target_for_build,uno)" \
++ "/usr/lib/libreoffice/program/uno" \
+ "-s com.sun.star.test.bridge.BridgeTest --" \
+ "-u 'uno:socket$(COMMA)host=127.0.0.1$(COMMA)port=2002;urp;test'" \
+ "-env:LO_BUILD_LIB_DIR=$(call gb_Helper_make_url,$(gb_Library_WORKDIR_FOR_BUILD))" \
+diff --git a/testtools/CustomTarget_uno_test.mk b/testtools/CustomTarget_uno_test.mk
+index 4850e5ca66b2..610a0b170e90 100644
+--- a/testtools/CustomTarget_uno_test.mk
++++ b/testtools/CustomTarget_uno_test.mk
+@@ -12,18 +12,12 @@ $(eval $(call gb_CustomTarget_CustomTarget,testtools/uno_test))
+ # this target is phony to run it every time
+ .PHONY : $(call gb_CustomTarget_get_target,testtools/uno_test)
+
+-$(call gb_CustomTarget_get_target,testtools/uno_test) : \
+- $(call gb_Executable_get_runtime_dependencies,uno) \
+- $(call gb_InternalUnoApi_get_target,bridgetest) \
+- $(call gb_Package_get_target,instsetoo_native_setup_ure) \
+- $(call gb_Rdb_get_target,uno_services) \
+- $(call gb_Rdb_get_target,ure/services) \
+- $(call gb_UnoApi_get_target,udkapi)
++$(call gb_CustomTarget_get_target,testtools/uno_test) :
+ ifneq ($(gb_SUPPRESS_TESTS),)
+ @true
+ else
+ $(call gb_Helper_abbreviate_dirs,\
+- $(call gb_Executable_get_command,uno) \
++ /usr/lib/libreoffice/program/uno \
+ -s com.sun.star.test.bridge.BridgeTest \
+ -- com.sun.star.test.bridge.CppTestObject \
+ -env:LO_BUILD_LIB_DIR=$(call gb_Helper_make_url,$(gb_Library_WORKDIR_FOR_BUILD)) \
+#diff --git a/testtools/Library_bridgetest-common.mk b/testtools/Library_bridgetest-common.mk
+#index 1ca38bca6b49..cbc793c36d39 100644
+#--- a/testtools/Library_bridgetest-common.mk
+#+++ b/testtools/Library_bridgetest-common.mk
+#@@ -20,16 +20,6 @@ $(eval $(call gb_Library_use_internal_api,testtools_bridgetest-common,\
+# bridgetest \
+# ))
+#
+#-$(eval $(call gb_Library_use_libraries,testtools_bridgetest-common, \
+#- cppu \
+#- cppuhelper \
+#- sal \
+#-))
+#-
+#-$(eval $(call gb_Library_use_api,testtools_bridgetest-common,\
+#- udkapi \
+#-))
+#-
+# $(eval $(call gb_Library_add_exception_objects,testtools_bridgetest-common,\
+# testtools/source/bridgetest/currentcontextchecker \
+# testtools/source/bridgetest/multi \
+#diff --git a/testtools/Library_bridgetest.mk b/testtools/Library_bridgetest.mk
+#index 52f335761fdf..f0bafca0998f 100644
+#--- a/testtools/Library_bridgetest.mk
+#+++ b/testtools/Library_bridgetest.mk
+#@@ -15,16 +15,9 @@ $(eval $(call gb_Library_use_internal_api,testtools_bridgetest,\
+# bridgetest \
+# ))
+#
+#-$(eval $(call gb_Library_use_api,testtools_bridgetest,\
+#- udkapi \
+#-))
+#-
+# $(eval $(call gb_Library_use_external,testtools_bridgetest,boost_headers))
+#
+# $(eval $(call gb_Library_use_libraries,testtools_bridgetest,\
+#- cppu \
+#- cppuhelper \
+#- sal \
+# testtools_bridgetest-common \
+# ))
+#
+#diff --git a/testtools/Library_constructors.mk b/testtools/Library_constructors.mk
+#index 516c05d62db8..3a2a4b8bca24 100644
+#--- a/testtools/Library_constructors.mk
+#+++ b/testtools/Library_constructors.mk
+#@@ -22,16 +22,6 @@ $(eval $(call gb_Library_use_internal_api,testtools_constructors,\
+# bridgetest \
+# ))
+#
+#-$(eval $(call gb_Library_use_api,testtools_constructors,\
+#- udkapi \
+#-))
+#-
+#-$(eval $(call gb_Library_use_libraries,testtools_constructors,\
+#- cppu \
+#- cppuhelper \
+#- sal \
+#-))
+#-
+# $(eval $(call gb_Library_add_exception_objects,testtools_constructors,\
+# testtools/source/bridgetest/constructors \
+# ))
+#diff --git a/testtools/Library_cppobj.mk b/testtools/Library_cppobj.mk
+#index 086b1fa0b6f5..9348254b6da8 100644
+#--- a/testtools/Library_cppobj.mk
+#+++ b/testtools/Library_cppobj.mk
+#@@ -20,16 +20,9 @@ $(eval $(call gb_Library_use_internal_api,testtools_cppobj,\
+# bridgetest \
+# ))
+#
+#-$(eval $(call gb_Library_use_api,testtools_cppobj,\
+#- udkapi \
+#-))
+#-
+# $(eval $(call gb_Library_use_external,testtools_cppobj,boost_headers))
+#
+# $(eval $(call gb_Library_use_libraries,testtools_cppobj,\
+#- cppu \
+#- cppuhelper \
+#- sal \
+# testtools_bridgetest-common \
+# ))
+#
+#diff --git a/unoidl/Executable_unoidl-check.mk b/unoidl/Executable_unoidl-check.mk
+#index 36dfc44de635..a1bb6ed14d80 100644
+#--- a/unoidl/Executable_unoidl-check.mk
+#+++ b/unoidl/Executable_unoidl-check.mk
+#@@ -15,10 +15,13 @@ $(eval $(call gb_Executable_add_exception_objects,unoidl-check, \
+#
+# $(eval $(call gb_Executable_use_libraries,unoidl-check, \
+# unoidl \
+#- $(if $(filter TRUE,$(DISABLE_DYNLOADING)),reg) \
+#- $(if $(filter TRUE,$(DISABLE_DYNLOADING)),store) \
+#- salhelper \
+#- sal \
+#+))
+#+
+#+$(eval $(call gb_Executable_add_ldflags,unoidl-check, \
+#+ $(if $(filter TRUE,$(DISABLE_DYNLOADING)),-L/usr/lib/libreoffice/program/ -lreglo) \
+#+ $(if $(filter TRUE,$(DISABLE_DYNLOADING)),-L/usr/lib/libreoffice/program/ -lstorelo) \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_sal \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_salhelpergcc3 \
+# ))
+#
+# # vim: set noet sw=4 ts=4:
+#diff --git a/unoidl/Executable_unoidl-read.mk b/unoidl/Executable_unoidl-read.mk
+#index b134c30b1a72..2bfd0ea3057f 100644
+#--- a/unoidl/Executable_unoidl-read.mk
+#+++ b/unoidl/Executable_unoidl-read.mk
+#@@ -15,10 +15,13 @@ $(eval $(call gb_Executable_add_exception_objects,unoidl-read, \
+#
+# $(eval $(call gb_Executable_use_libraries,unoidl-read, \
+# unoidl \
+#- $(if $(filter TRUE,$(DISABLE_DYNLOADING)),reg) \
+#- $(if $(filter TRUE,$(DISABLE_DYNLOADING)),store) \
+#- salhelper \
+#- sal \
+#+))
+#+
+#+$(eval $(call gb_Executable_add_ldflags,unoidl-read, \
+#+ $(if $(filter TRUE,$(DISABLE_DYNLOADING)),-L/usr/lib/libreoffice/program/ -lreglo) \
+#+ $(if $(filter TRUE,$(DISABLE_DYNLOADING)),-L/usr/lib/libreoffice/program/ -lstorelo) \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_sal \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_salhelpergcc3 \
+# ))
+#
+# # vim: set noet sw=4 ts=4:
+#diff --git a/unoidl/Executable_unoidl-write.mk b/unoidl/Executable_unoidl-write.mk
+#index 9accb31ac14d..f69d78a09c32 100644
+#--- a/unoidl/Executable_unoidl-write.mk
+#+++ b/unoidl/Executable_unoidl-write.mk
+#@@ -15,10 +15,15 @@ $(eval $(call gb_Executable_add_exception_objects,unoidl-write, \
+#
+# $(eval $(call gb_Executable_use_libraries,unoidl-write, \
+# unoidl \
+#- $(if $(filter TRUE,$(DISABLE_DYNLOADING)),reg) \
+#- $(if $(filter TRUE,$(DISABLE_DYNLOADING)),store) \
+#- salhelper \
+#- sal \
+# ))
+#
+#+$(eval $(call gb_Executable_add_ldflags,unoidl-write, \
+#+ $(if $(filter TRUE,$(DISABLE_DYNLOADING)),-L/usr/lib/libreoffice/program/ -lreglo) \
+#+ $(if $(filter TRUE,$(DISABLE_DYNLOADING)),-L/usr/lib/libreoffice/program/ -lstorelo) \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_sal \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_salhelpergcc3 \
+#+))
+#+
+#+
+#+
+# # vim: set noet sw=4 ts=4:
+#diff --git a/unoidl/Library_unoidl.mk b/unoidl/Library_unoidl.mk
+#index c98fc69f4945..bdc8285fe234 100644
+#--- a/unoidl/Library_unoidl.mk
+#+++ b/unoidl/Library_unoidl.mk
+#@@ -32,10 +32,10 @@ $(eval $(call gb_Library_set_include,unoidl, \
+# -I$(SRCDIR)/unoidl/source \
+# ))
+#
+#-$(eval $(call gb_Library_use_libraries,unoidl, \
+#- reg \
+#- sal \
+#- salhelper \
+#+$(eval $(call gb_Library_add_libs,unoidl, \
+#+ -L/usr/lib/libreoffice/program/ -lreglo \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_sal \
+#+ -L/usr/lib/libreoffice/sdk/lib/ -luno_salhelpergcc3 \
+# ))
+#
+# # vim: set noet sw=4 ts=4:
--- /dev/null
+diff --git a/solenv/gbuild/UITest.mk b/solenv/gbuild/UITest.mk
+index cebb030a12cd..88ec5499dcbd 100644
+--- a/solenv/gbuild/UITest.mk
++++ b/solenv/gbuild/UITest.mk
+@@ -34,7 +34,7 @@ ifneq ($(gb_UITest_DEBUGRUN),)
+ gb_UITest_SOFFICEARG:=connect:pipe,name=$(USER)
+ gb_UITest__interactive := $(true)
+ else
+-gb_UITest_SOFFICEARG:=path:$(INSTROOT)/$(LIBO_BIN_FOLDER)/soffice
++gb_UITest_SOFFICEARG:=$(OOO_TEST_SOFFICE)
+ endif
+
+ gb_UITest_COMMAND := LIBO_LANG=en_US.UTF-8 $(gb_UITest_EXECUTABLE) $(SRCDIR)/uitest/test_main.py
+@@ -65,8 +65,8 @@ else
+ $(DEFS) \
+ SAL_LOG_FILE="$(dir $(call gb_UITest_get_target,$*))/soffice.out.log" \
+ TEST_LIB=$(call gb_Library_get_target,test) \
+- URE_BOOTSTRAP=vnd.sun.star.pathname:$(call gb_Helper_get_rcfile,$(INSTROOT)/$(LIBO_ETC_FOLDER)/fundamental) \
+- PYTHONPATH="$(PYPATH)" \
++ URE_BOOTSTRAP=vnd.sun.star.pathname:/usr/lib/libreoffice/program/fundamentalrc \
++ PYTHONPATH="$(filter-out $I/program,$(PYPATH):/usr/lib/libreoffice/program)" \
+ TestUserDir="$(call gb_Helper_make_url,$(dir $(call gb_UITest_get_target,$*)))" \
+ PYTHONDONTWRITEBYTECODE=0 \
+ $(if $(filter-out MACOSX WNT,$(OS_FOR_BUILD)),$(if $(ENABLE_HEADLESS),, \
+diff --git a/Makefile.in b/Makefile.in
+index 037cb5dce95b..f1b7c28e3c59 100644
+--- a/Makefile.in
++++ b/Makefile.in
+@@ -13,7 +13,6 @@ gb_Top_MODULE_CHECK_TARGETS := slowcheck unitcheck subsequentcheck perfcheck uic
+
+ MAKECMDGOALS?=all
+ build_goal:=$(if $(filter build check,$(MAKECMDGOALS)),all)\
+- $(if $(filter build-nocheck uicheck,$(MAKECMDGOALS)),build)\
+ $(if $(filter check,$(MAKECMDGOALS)),subsequentcheck $(if $(filter Linux, $(shell uname)), uicheck))\
+ $(filter all build-l10n-only build-non-l10n-only debugrun help showmodules translations $(gb_Top_MODULE_CHECK_TARGETS) check packageinfo gbuildtojson,$(MAKECMDGOALS))
+
+diff --git a/solenv/gbuild/Module.mk b/solenv/gbuild/Module.mk
+index 4073dcfd9bf5..856f5efee988 100644
+--- a/solenv/gbuild/Module.mk
++++ b/solenv/gbuild/Module.mk
+@@ -201,7 +201,7 @@ perfcheck :
+ $(call gb_Output_announce_title,all perftests checked.)
+ $(call gb_Output_announce_bell)
+
+-uicheck : build
++uicheck :
+ $(if $(gb_VERBOSE),$(call gb_Output_announce,loaded modules: $(sort $(gb_Module_ALLMODULES)),$(true),UIT,6))
+ $(call gb_Output_announce_title,all uicheck checked.)
+ $(call gb_Output_announce_bell)
+@@ -372,11 +372,6 @@ define gb_Module_add_uicheck_target
+ $(call gb_Module__read_targetfile,$(1),$(2),uicheck target)
+
+ $(call gb_Module_get_uicheck_target,$(1)) : $$(gb_Module_CURRENTTARGET)
+-$$(gb_Module_CURRENTTARGET) :| \
+- $(call gb_Postprocess_get_target,AllModulesButInstsetNative) \
+- $(call gb_Package_get_target,instsetoo_native_setup) \
+- $(call gb_Package_get_target,instsetoo_native_setup_ure)
+-$(call gb_Module_get_uicheck_target,$(1)) : $$(gb_Module_CURRENTTARGET)
+ $(call gb_Module_get_clean_target,$(1)) : $$(gb_Module_CURRENTCLEANTARGET)
+
+ endef
+@@ -479,7 +474,7 @@ endif
+ subsequentcheck : $$(firstword $$(gb_Module_SUBSEQUENTCHECKTARGETSTACK))
+ stagingcheck : $$(firstword $$(gb_Module_STAGINGCHECKTARGETSTACK))
+ perfcheck : $$(firstword $$(gb_Module_PERFCHECKTARGETSTACK))
+-uicheck : build $$(firstword $$(gb_Module_UICHECKTARGETSTACK))
++uicheck : $$(firstword $$(gb_Module_UICHECKTARGETSTACK))
+ clean : $$(firstword $$(gb_Module_CLEANTARGETSTACK))
+
+ ifneq ($$(words $$(gb_Module_TARGETSTACK)),1)
--- /dev/null
+#!/usr/bin/python3
+
+import sys, os
+sys.path.append('/usr/lib/libreoffice/program')
+os.putenv('URE_BOOTSTRAP', 'vnd.sun.star.pathname:/usr/lib/libreoffice/program/fundamentalrc')
+
+import pyuno
+print(pyuno)
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run smoketest against an installed version of LibreOffice
+# (c) 2018 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+if [ "`dpkg-architecture -qDEB_HOST_ARCH_ENDIAN`" = "big" ]; then
+ echo "Tests are not built on big endian architectures - skipping."
+ exit 77
+fi
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ TMP=`mktemp -q -p $AUTOPKGTEST_TMP`
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ TMP=`mktemp -q`
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ cd $SRCDIR
+ echo
+ echo "====== Unapplying the patches ======"
+ patch -p1 -R < ./debian/tests/patches/smoketest-standalone.diff
+ patch -p0 -R < ./debian/tests/patches/smoketest-disable-extension-tests.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to only build the smoketest unittest against an existing installation ======"
+patch -p1 < ./debian/tests/patches/smoketest-standalone.diff
+patch -p0 < ./debian/tests/patches/smoketest-disable-extension-tests.diff
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+# FIXME: GROSS HACK.
+echo
+echo "====== Building needed parts of LibreOffice ======"
+./debian/rules config_host.mk ENABLE_PDFIUM=n ENABLE_MERGELIBS=n BUILD_GTK=n BUILD_GTK3=n BUILD_KDE=n
+cat << EOF >> $TMP
+export gb_SUPPRESS_TESTS=true
+make test.all verbose=t
+make bridges.all verbose=t
+make javaunohelper.all verbose=t
+make unoil.all verbose=t
+make unotest.all verbose=t
+make ure.all verbose=t
+make i18npool.all verbose=t
+EOF
+chmod 755 $TMP
+#TIMEOUT OPTIONS
+# --timeout-which=seconds
+# Use a different timeout for operations on or with the testbed.
+# There are five timeouts affected by five values of which: short:
+# supposedly short operations like setting up the testbed's apt
+# and checking the state (default: 100s); install: installation of
+# packages including dependencies (default: 3,000s); test: test
+# runs (default: 10,000s); copy: copy files/directories between
+# host and testbed (default: 300s); and build: builds (default:
+# 100,000s). The value must be specified as an integer number of
+# seconds.
+# 10000s = 160 min. so we have enough time to actually run the test :)
+timeout 150m $TMP || \
+ if test "$?" = "124"; then rm -f $TMP; exit 77; \
+ else exit $?; fi
+
+rm -f $TMP
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting smoketest with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+export PARALLELISM=$CHECK_PARALLELISM
+
+export LD_LIBRARY_PATH=/usr/lib/libreoffice/program:$LD_LIBRARY_PATH
+cd smoketest && make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ CppunitTest_smoketest INSTDIR=/usr/lib/libreoffice verbose=t
+
+cd $SRCDIR
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Install a test extension (as smoketest would do)
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ TMP=`mktemp -q -p $AUTOPKGTEST_TMP`
+else
+ TMP=`mktemp -q`
+fi
+
+echo
+echo "====== Add the extension ======"
+# does it install fine?
+unopkg add -v /usr/share/libreoffice/TestExtension.oxt
+
+echo
+echo "====== Show extension status ======"
+# does it list? For whatever reason unopkg leaves a stale .lock behind when
+# doing this grep directly on the output so do it on a tmpfile
+unopkg list | tee $TMP
+grep -q org.libreoffice.smoketest.TestExtension $TMP || exit 1
+rm $TMP
+
+echo
+echo "====== Remove the extension ======"
+# does it remove?
+unopkg remove -v org.libreoffice.smoketest.TestExtension
+
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Install a test extension shared
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ TMP=`mktemp -q -p $AUTOPKGTEST_TMP`
+else
+ TMP=`mktemp -q`
+fi
+
+
+echo
+echo "====== Add the extension ======"
+# does it install fine?
+unopkg add --shared -v /usr/share/libreoffice/TestExtension.oxt
+
+echo
+echo "====== Show extension status ======"
+# does it list? For whatever reason unopkg leaves a stale .lock behind when
+# doing this grep directly on the output so do it on a tmpfile
+unopkg list --shared | tee $TMP
+grep -q org.libreoffice.smoketest.TestExtension $TMP || exit 1
+rm $TMP
+
+echo
+echo "====== Remove the extension ======"
+# does it remove?
+unopkg remove --shared -v org.libreoffice.smoketest.TestExtension
+
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run uicheck against an installed version of LibreOffice
+# (c) 2017 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ echo
+ echo "====== Unapplying the patch ======"
+ patch -p1 -R < ./debian/tests/patches/uicheck-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to build uicheck against an existing installation ======"
+patch -p1 < ./debian/tests/patches/uicheck-standalone.diff
+
+# this normally shouldn't be needed but otherwise it wants a automatic
+# re-autogen.
+echo
+echo "====== Generating configuration ======="
+rm -f config_host.mk
+./debian/rules config_host.mk
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+echo
+echo "====== Generating en_US.UTF-8 locale ======"
+cd $WORKDIR
+$SRCDIR/debian/scripts/locale-gen
+
+OOO_TEST_SOFFICE="${1:-path:/usr/lib/libreoffice/program/soffice}"
+
+echo
+echo "====== Starting uicheck with ${CHECK_PARALLELISM} job against ${OOO_TEST_SOFFICE} ======"
+
+cd $SRCDIR
+export PARALLELISM=$CHECK_PARALLELISM
+export LOCPATH=$WORKDIR/debian/locales
+export LANG=en_US.UTF-8
+export LC_ALL=en_US.UTF-8
+make -rk \
+ OOO_TEST_SOFFICE=${OOO_TEST_SOFFICE} \
+ uicheck verbose=t
+
+unapply
+
--- /dev/null
+#!/bin/bash
+# autopkgtest check: Run UNO tests against an installed version of the URE
+# (c) 2018 Software in the Public Interest, Inc.
+# Authors: Rene Engelhard <rene@debian.org>
+
+set -e
+set -E
+
+SRCDIR=`pwd`
+CHECK_PARALLELISM=1
+if [ -n "$AUTOPKGTEST_TMP" ]; then
+ TMP=`mktemp -q -p $AUTOPKGTEST_TMP`
+ WORKDIR=`mktemp -q -d -p $AUTOPKGTEST_TMP`
+else
+ TMP=`mktemp -q`
+ WORKDIR=`mktemp -q -d`
+fi
+
+function unapply() {
+ cd $SRCDIR
+ echo
+ echo "====== Unapplying the patches ======"
+ patch -p1 -R < ./debian/tests/patches/testtools-standalone.diff
+}
+
+trap "unapply" ERR
+
+echo
+echo "====== Patching the tree to only build the testtools unittest against an existing installation ======"
+patch -p1 < ./debian/tests/patches/testtools-standalone.diff
+
+echo
+echo "====== Enabling core dumps ======"
+# yes, we want core dumps and stack traces
+ulimit -c unlimited
+
+# this normally shouldn't be needed but otherwise it wants a automatic
+# re-autogen.
+echo
+echo "====== Generating configuration ======="
+rm -f config_host.mk
+./debian/rules config_host.mk ENABLE_PDFIUM=n ENABLE_MERGELIBS=n BUILD_GTK=n BUILD_GTK3=n BUILD_KDE=n
+
+echo
+echo "====== Starting uno test with ${CHECK_PARALLELISM} job against /usr/lib/libreoffice/program/uno ======"
+
+export PARALLELISM=$CHECK_PARALLELISM
+
+export LD_LIBRARY_PATH=/usr/lib/libreoffice/program:$LD_LIBRARY_PATH
+make testtools.all verbose=t
+
+cd $SRCDIR
+
+unapply
+
--- /dev/null
+#!/usr/bin/python3
+
+import uno
+print(uno)
--- /dev/null
+uno-libs3: shlibs-declares-dependency-on-other-package uno-libs3 (*), ure
+uno-libs3: symbols-declares-dependency-on-other-package ure
--- /dev/null
+libuno_cppu.so.3 uno-libs3 #MINVER#, ure
+ (symver)UDK_3_0_0 1.4.0
+ (symver)UDK_3.1 1.4.0
+ (symver)UDK_3.2 1.4.0
+ (symver)UDK_3.3 1.4.0
+ (symver)LIBO_UDK_4.4 4.4.0~alpha
+libuno_cppuhelpergcc3.so.3 uno-libs3 #MINVER#, ure
+ (symver)UDK_3_0_0 1.4.0
+ (symver)UDK_3.1 1.4.0
+ (symver)UDK_3.2 1.4.0
+ (symver)UDK_3.3 1.4.0
+ (symver)UDK_3.4 1.4.0
+ (symver)UDK_3.5 1.4.0
+ (symver)UDK_3.6 1.7.0
+ (symver)UDK_3.7 3.4.0
+ (symver)UDK_3.8 3.5.0~beta
+ (symver)LIBO_UDK_3.9 4.0.0~alpha
+ (symver)LIBO_UDK_5.3 5.3.0~alpha
+libuno_sal.so.3 uno-libs3 #MINVER#, ure
+ (symver)UDK_3_0_0 1.4.0
+ (symver)UDK_3.1 1.4.0
+ (symver)UDK_3.2 1.4.0
+ (symver)UDK_3.3 1.4.0
+ (symver)UDK_3.4 1.4.0
+ (symver)UDK_3.5 1.4.0
+ (symver)UDK_3.6 1.4.0
+ (symver)UDK_3.7 1.4.0
+ (symver)UDK_3.8 1.4.0
+ (symver)UDK_3.9 1.5.0
+ (symver)UDK_3.10 1.6.0
+ UDK_3.11@UDK_3.11 1.7.0+LibO3.3.0~beta3
+ osl_clearEnvironment@UDK_3.11 1.7.0+LibO3.3.0~beta3
+ osl_setEnvironment@UDK_3.11 1.7.0+LibO3.3.0~beta3
+ (symver)UDK_3.11 1.8.0
+ (symver)PRIVATE_1.0 3.3.0~
+ (symver)PRIVATE_1.1 3.3.0~
+ (symver)LIBO_UDK_3.5 3.5.0~beta
+ (symver)PRIVATE_1.2 3.5.0~beta
+ (symver)PRIVATE_textenc.1 3.6.0~beta
+ (symver)LIBO_UDK_3.6 4.0.0~alpha
+ (symver)LIBO_UDK_4.0 4.0.0~beta
+ (symver)LIBO_UDK_4.1 4.1.0~alpha
+ (symver)LIBO_UDK_4.2 4.2.0~rc1
+ (symver)LIBO_UDK_4.3 4.3.0~alpha
+ (symver)LIBO_UDK_5.0 5.0.0~alpha
+ (symver)LIBO_UDK_5.1 5.1.0~alpha
+ (symver)LIBO_UDK_5.2 5.2.0~alpha
+ (symver)LIBO_UDK_5.3 5.3.0~alpha
+ (symver)PRIVATE_1.3 5.4.0~alpha
+ (symver)PRIVATE_1.4 6.0.0~alpha
+ (symver)PRIVATE_1.5 6.1.0~alpha
+libuno_salhelpergcc3.so.3 uno-libs3 #MINVER#, ure
+ (symver)UDK_3_0_0 1.4.0
+ (symver)UDK_3.1 1.4.0
+ (symver)LIBO_UDK_3.6 3.6.0~beta
+libuno_purpenvhelpergcc3.so.3 uno-libs3 #MINVER#, ure
+ (symver)UDK_3_0_0 1.4.0
--- /dev/null
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1.4.12 (GNU/Linux)
+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+=CCIg
+-----END PGP PUBLIC KEY BLOCK-----
--- /dev/null
+#!/bin/sh
+
+echo "" >&3
+echo "Java:" >&3
+/usr/lib/libreoffice/program/javaldx >&3
--- /dev/null
+ure: classpath-contains-relative-path usr/share/java/jurt.jar: ridl.jar unoloader.jar ../../lib/ /usr/lib/ure/lib/ ../bin/
+ure: classpath-contains-relative-path usr/share/java/juh.jar: ridl.jar jurt.jar ../../lib/ ../bin/
+ure: classpath-contains-relative-path usr/share/java/java_uno.jar: jurt.jar ridl.jar ../../lib/ ../bin/
--- /dev/null
+# List of POM files for the package
+# Format of this file is:
+# <path to pom file> [option]*
+# where option can be:
+# --ignore: ignore this POM and its artifact if any
+# --ignore-pom: don't install the POM. To use on POM files that are created
+# temporarily for certain artifacts such as Javadoc jars. [mh_install, mh_installpoms]
+# --no-parent: remove the <parent> tag from the POM
+# --package=<package>: an alternative package to use when installing this POM
+# and its artifact
+# --has-package-version: to indicate that the original version of the POM is the same as the upstream part
+# of the version for the package.
+# --keep-elements=<elem1,elem2>: a list of XML elements to keep in the POM
+# during a clean operation with mh_cleanpom or mh_installpom
+# --artifact=<path>: path to the build artifact associated with this POM,
+# it will be installed when using the command mh_install. [mh_install]
+# --java-lib: install the jar into /usr/share/java to comply with Debian
+# packaging guidelines
+# --usj-name=<name>: name to use when installing the library in /usr/share/java
+# --usj-version=<version>: version to use when installing the library in /usr/share/java
+# --no-usj-versionless: don't install the versionless link in /usr/share/java
+# --dest-jar=<path>: the destination for the real jar.
+# It will be installed with mh_install. [mh_install]
+# --classifier=<classifier>: Optional, the classifier for the jar. Empty by default.
+# --site-xml=<location>: Optional, the location for site.xml if it needs to be installed.
+# Empty by default. [mh_install]
+#
+debian/pom.juh.xml --no-parent --has-package-version
+debian/pom.jurt.xml --no-parent --has-package-version
+debian/pom.ridl.xml --no-parent --has-package-version
+debian/pom.unoloader.xml --no-parent --has-package-version
--- /dev/null
+PLATFORMID=linux_alpha
--- /dev/null
+PLATFORMID=linux_x86_64
--- /dev/null
+PLATFORMID=linux_arm_oabi
--- /dev/null
+PLATFORMID=linux_aarch64
--- /dev/null
+PLATFORMID=linux_arm_eabi
--- /dev/null
+PLATFORMID=linux_arm_eabi
--- /dev/null
+PLATFORMID=linux_hppa
--- /dev/null
+PLATFORMID=linux_x86
--- /dev/null
+PLATFORMID=linux_ia64
--- /dev/null
+PLATFORMID=kfreebsd_x86_64
--- /dev/null
+PLATFORMID=kfreebsd_x86
--- /dev/null
+PLATFORMID=linux_m68k
--- /dev/null
+PLATFORMID=linux_mips_eb
--- /dev/null
+PLATFORMID=linux_mips64_eb
--- /dev/null
+PLATFORMID=linux_mips64_el
--- /dev/null
+PLATFORMID=linux_mips_el
--- /dev/null
+PLATFORMID=linux_powerpc
--- /dev/null
+PLATFORMID=linux_powerpc
--- /dev/null
+PLATFORMID=linux_powerpc64
--- /dev/null
+PLATFORMID=linux_powerpc64_le
--- /dev/null
+PLATFORMID=linux_s390
--- /dev/null
+PLATFORMID=linux_s390x
--- /dev/null
+PLATFORMID=solaris_x86
--- /dev/null
+PLATFORMID=linux_sparc
--- /dev/null
+PLATFORMID=linux_sparc64
--- /dev/null
+version=4
+
+opts="compression=xz,pgpsigurlmangle=s/$/.asc/," \
+ http://download.documentfoundation.org/@PACKAGE@/src/(\d.\d.\d)/@PACKAGE@-(\d.\d.\d).\d.tar.xz debian
+
+opts="compression=xz,pgpsigurlmangle=s/$/.asc/,component=helpcontent2," \
+ http://download.documentfoundation.org/@PACKAGE@/src/(\d.\d.\d)/@PACKAGE@-help-(\d.\d.\d).\d.tar.xz same
+
+opts="compression=xz,pgpsigurlmangle=s/$/.asc/,component=translations," \
+ http://download.documentfoundation.org/@PACKAGE@/src/(\d.\d.\d)/@PACKAGE@-translations-(\d.\d.\d).\d.tar.xz same
+
+
--- /dev/null
+Document: xmerge-javadoc
+Title: LibreOffice XMerge API Javadoc
+Author: Oracle
+Section: Apps/Programming
+
+Format: HTML
+Index: /usr/share/doc/libreoffice-dev/docs/xmerge/index.html
projects / libreoffice.git / commitdiff